Participating International Societies:
Adhesion Society Executive Committee President Greg Schueneman
Bioadhesion Division Chair Burak Aksak
Immediate Past President Anand Jagota
Soft Adhesives Division Chair Dale Haner
Vice President Tim Long
Structural Adhesives Division Chair Aaron Forster
USDA Forest Products Laboratory
Lehigh University
Texas Tech University
DHM Adhesives
National Institute of Standards & Technology
Virginia Tech
Secretary Chelsea Davis
Soft Adhesives Division Chair Dale Haner
Purdue University
DHM Adhesives
Treasurer Charles Shuster
Franklin International Inc.
Editor Carlos Barrios, 3M Company Shantanu Ranade, 3M Company Members at Large Kay Blohowiak
Home Office Manager/ Onsite Contact Malinda Armstrong The Adhesion Society
2018 Program Chair Joelle Frechette
Johns Hopkins University
The Boeing Company
Kevin Turner
University of Pennsylvania
Award Sponsors A special “THANK YOU” to our generous sponsors of the following awards: • Adhesion Society Award for Excellence in Adhesion Science sponsored by 3M • The Robert L. Patrick Fellowship Award sponsored by The Adhesion Society • Distinguished Paper Award sponsored by the Henkel Corporation • Peebles Awards for Graduate Student Research in Adhesion Science by the Adhesion Society • Alan Gent Distinguished Student Paper Award sponsored by Henkel Corporation • Best Poster Award sponsored by Avery Dennison • Adhesion Society Early Career Scientist Award sponsored by the Adhesive & Sealant Council • 5K Run sponsored by L&L Products, 3M Company, BTG Labs, Lawter • Tuesday Coffee Break sponsored by PPG 1 6th WCARP & Adhesion Society 41st Annual Meeting
General Information Final Program Content Executive Committee & Award Sponsors............................. page 1 General Information & Exhibition......................................... page 2 Sunday Schedule................................................................ page 4 Monday Schedule............................................................... page 5 Poster Session & Reception.............................................. page 14 Tuesday Schedule............................................................. page 18 Wednesday Schedule........................................................ page 27 Thursday Schedule........................................................... page 35
Registration/Information Hours Kon Tiki Ballroom Foyer, 2nd Floor Sunday, February 25 Monday, February 26 Tuesday, February 27 Wednesday, February 28 Thursday, March 1
Noon – 5:00 p.m. 7:00 a.m. – 5:00 p.m. 7:00 a.m. – 5:00 p.m. 7:00 a.m. – 5:00 p.m. 7:00 – 10:00 a.m.
Proceedings* In keeping with the continuing efforts to make our event more environmentally friendly, hard copies of presentations will not be available. You can locate the proceedings by accessing the link provided in your packet or on the Adhesion Society website. *Not all presenters have authorized The Adhesion Society to publish their abstract.
Please recycle this program when done.
Kon Tiki Ballroom Foyer, 2nd Floor
2018 Exhibitors • ASI Magazine • DataPhysics Instruments • Everlight Chemical • IMASS, Inc. • IOP Publishing • KRUSS USA • NANOVEA • Photron USA, Inc. • Psylotech, Inc. • Shimadzu Scientific Instruments, Inc-North America • SurForce LLC Final Program 2018
2
The Host
Adhesion Adhesion Society
Society
Program Chair: Professor Joelle Frechette, Johns Hopkins University
International Organizing Committee
Professor Silvio de Barros, Brazilian Society of Adhesions and Adhesives
Professor Akio Takemura, Professor Chiaki Sato, Professor Takashi Nishino, & Professor Hajime Kishi, Adhesion Society of Japan
Professor Zhang Junying & Jun Que, Beijing Adhesion Society
Professor Costantino Creton, Société Française du Vide
Steve Shaw, Professor John Bishopp, & Professor Tony Kinloch, Society for Adhesion and Adhesives Professor Lucas F. M. da Silva, Portuguese Adhesion Society
Professor José Miguel Martín-Martínez, Professor Juan Carlos Suarez-Bermejo, Sociedad de Adhesion
Professor, Hyun-Joong Kim, Society of Adhesion & Interface Korea
Professor Andreas Hartwig & Professor Wulff Possart, DECHEMA Gesellschaft für Chemische Technik und Biotechnologie
3 6th WCARP & Adhesion Society 41st Annual Meeting
Noon to 5:00 p.m.
Registration
1:00 to 1:30 p.m.
Opening Ceremony
Kon Tiki Ballroom Foyer, 2nd Floor
reg Schueneman, President, G Adhesion Society, Joelle Frechette, 2018 Program Chair and International Organizing Committee
Kon Tiki Ballroom, 2nd Floor
1:00 to 1:30 p.m.
018 Award for Excellence 2 in Adhesion Society Symposium S ponsored by 3M – Honoring Ray Pearson, Lehigh University
Kon Tiki Ballroom, 2nd Floor 1:30 p.m. Introductory Remarks Anand Jagota, Lehigh University 1:45 p.m. Increasing the Toughness, Cyclic-Fatigue Resistance and Damage Characterisation in Adhesively-Bonded Composite Joints by the Use of Carbon Nanofibres Anthony Kinloch, Imperial College 2:15 p.m. Next-Generation Soft-Particle Toughening Through Changes in Particle Shape Alan Lesser, University of Massachusetts 2:45 p.m. Are Hairy Nanoparticles the Key to Robust Mechanical Properties Linda Schadler, RPI 3:15 p.m. Intrinsic Fracture Properties of Rubber Modified Epoxy Adhesives Alojz Ivankovic, University College Dublin 3:45 p.m. BREAK 4:15 p.m. An Overview of Nanoparticle Toughened Epoxies Ray Pearson, Lehigh University & 2018 Award of Excellence Recipient
1:30 – 6:00 p.m.
Exhibition
Kon Tiki Ballroom Foyer, 2nd Floor
5:00 – 6:00 p.m. Business Meeting Early Career Scientist, Distinguished Paper, & Patrick Fellow Awards Presentation Kon Tiki Ballroom, 2nd Floor
6:30 – 8:30 p.m. Presidents
& Dinner
Reception
Aviary Ballroom, 2nd Floor
Final Program 2018 4
7:00 a.m. – 5:00 p.m.
Registration
7:00 – 7:45 a.m.
Networking Breakfast
Kon Tiki Ballroom Foyer, 2nd Floor Rousseau Suite, 1st Floor
8:00 – 8:45 a.m.
Plenary Talk I: Dispersion and Assembly of Nanoparticles in Polymers for Functional and Structural Applications
Hung-Jue Sue, Texas A&M University Kon Tiki Ballroom, 2nd Floor
Morning Technical Sessions 9:00 a.m. to Noon Surface Preparation for Bonding: Reliable Bonding through Quality Control Kon Tiki Ballroom, 2nd Floor
Moderator: Dan Knorr, US Army Research Laboratory Session Chairs: Frank Palmieri, NASA-LARC & Dan Knorr, US Army Research Laboratory
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
10:40 to 11:05 a.m.
11:05 to 11:30 a.m.
11:30 a.m. to Noon
Adhesive Bonding of Carbon Fiber Reinforced Plastics (CFRP) for Aerospace Structures Jens Holtmannspotter, WIWeB Characterization of Pulsed-Laser Surface Process on Epoxy Composites by Design of Experiments Method Frank Palmieri, NASA-LARC Keynote
Laser Ablation Surface Treatment of Structural Aerospace Composites and Metal Alloys for Adhesive Bonding John Connell, NASA Langley Research Center
In-Process Quality Assurance Procedures for Surface Preparation in Adhesive Bonding of Lightweight Composite Structures Christian Tornow, Fraunhofer Institute for Manufacturing Technology and Advanced Materials (IFAM) New Multiscale Approach on Co-Bonded Interfaces for Composite Assembly Jean-Baptiste Genet, LCPO - Bordeaux University
I s There a Quantitative Relationship Between Concentration of Polar Functional Groups and Surface Energy? Giles Dillingham, BTG Labs LLC
5 6th WCARP & Adhesion Society 41st Annual Meeting
Fracture Mechanics: Crack Tip Phenomena in Structural Adhesive Failure Toucan, 2nd Floor
Moderator: Bamber Blackman, Imperial College London Session Chairs: Chenglin Wu, Missouri University of Science and Technology & Bamber Blackman, Imperial College London Keynote
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
10:40 to 11:05 a.m.
11:05 to 11:30 a.m.
11:30 a.m. to Noon
Cohesive-Length Scales and Fracture M.D. Thouless, Missouri University of Science and Technology Adhesion between Silver Nano Wire and Graphene Yanxiao Li, Missouri University of Science & Technology A Cohesive Zone Model and Scaling Analysis for Mixed-mode Interfacial Fracture Shruti Jain, University of Texas
Use of DIC to Measure Cohesive Tractions in a DCB Geometry M.D. Thouless, Missouri University of Science and Technology Non-Linear Load Response during Elastic-Brittle Onset of Interface Crack Michal Budzik, Aarhus University
A Generalized Scaling Law for Bonded Beam Strengths David Dillard, Virginia Tech
Biomedical Adhesives & Clinical Applications Macaw, 2nd Floor
Moderators & Session Chairs: Bruce Lee, Michigan Technological University, Kolbe Ahn, University of California, Santa Barbara & Yuhan Lee, Harvard Medical School
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
10:40 to 11:05 a.m.
Toxicity-Reduced Polycatecholamine Adhesives for Hemostasis Eunsook Park, Korea Advance Institute of Science & Technology Optimization of Novel Fibrin-polydopamine Adhesive Hydrogels for Use in Marine Wound Healing Rupak Rajachar, Michigan Technological University Therapeutic Luminal Coating of the Intestine Yuhan Lee, Brigham and Women’s Hospital/Harvard Medical School
Keynote
Dental Adhesion and Its Application Jinsoo Ahn, Seoul National University
Final Program 2018 6
11:05 to 11:30 a.m.
11:30 a.m. to Noon
Tough Dental Adhesives and Composites Kollbe Ahn, University of California, Santa Barbara
V Curable Polymer Nano Composites based on Inorganic Nano Fillers U for 3D Printing Hoon Kim, Seoul National University
Surface Contaminations (Biofouling, Hoon Kim, Universityoon to 12:30 p.m. Insets & Seoul Ice):National Ice Adhesion Resistant Materials Research Cockatoo, 2nd Floor
Moderator: Christopher Wohl, NASA Langley Research Center Session Chairs: Christopher Wohl, NASA Langley Research Center & Hossein Sojoudi, University of Toledo
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
10:40 to 11:05 a.m.
11:05 to 11:30 a.m.
11:30 a.m. to Noon
Thermal and Electrical Conductive Superhydrophobic Flexible Membrane for Anti-icing/Ice Eliminating Zihe Pan, University of Waterloo Keynote
Ice Adhesion Reducing Polymers and Prepolymers Based on Siloxanes and F-POSS Ranya Simons, CSIRO Scalable and Durable Polymeric Ice-phobic and Hydrate-phobic Coatings Hossein Sojoudi, University of Toledo
Anti-icing/snow Properties of Self-lubricating Organogels : SLUGs Atsushi Hozumi, AIST Extreme Anti-icing Surfaces Hadi Ghasemi, University of Houston
S uperhydrophobic Materials are NOT Suitable for Passive Ice Protection of Aircraft Grant Schneeberger, Pennsylvania State University
Novel Chemistry: Soft Adhesives Boardroom, 2nd Floor
Moderators & Session Chairs: Karl Benson, 3M Company, Scott Phillips, Boise State University & José Martín Martínez, University of Alicante
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
Enhanced Bonding Strength of Hydrophobically-modified Gelatin-based Tissue Adhesives Tetsushi Taguchi, National Institute for Materials Science
7
P ressure Sensitive Adhesives of Ethylene-co-n-Butyl Acrylate (EBA) Copolymer without Plasticizer Showing Controlled Tack at Different Temperature José Martin-Martinez, University of Alicante
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
10:40 to 11:05 a.m.
11:05 to 11:30 a.m.
11:30 a.m. to Noon
Keynote
Crosslinking Chemistry for Activatable and Patternable Pressure Sensitive Adhesives Jason Clapper, 3M Company
Adhesion Stability of Polyurethane Layers on Native Metals – Influence of the Deposition Technique Frank Fug, Saarland University Reactive Polyurethane Adhesive During and After Crosslinking in Moist Conditions: Chemistry, Polymer Dynamics and Mechanical Properties Bettina Zimmer, Saarland University
I nnovative, Soft Thermoplastic Urethane Hot Melt Adhesives and their Applications Sat Nistala Lubrizol
Noon to 1:30 p.m. Lunch on Your Own Enjoy San Diego
Bioadhesion Division Meeting Rousseau East West, 1st Floor
Soft Adhesives Division Meeting Rousseau Center, 1st Floor
Structural Adhesives Divisions Meetings Plumeria Suite (located on the ground floor – outside of the main building by the pool area)
Final Program 2018 8
Afternoon Technical Sessions 1:30 to 5:40 p.m. Novel Tools & Methods for Characterizations: In situ Measurements Kon Tiki Ballroom, 2nd Floor
Moderator: Aaron Forster, National Institute of Standards & Technology Session Chairs: Chelsea Davis, Purdue University & Aaron Forster, National Institute of Standards & Technology
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
Keynote
In Situ Measurements of the Real Area of Contact: The Contact Mechanics Challenge Greg Sawyer, University of Florida Real-time Measurements of Lipid Domain Rearrangements, Membrane Thickness, and Intermembrane Forces Kai Kristiansen, University of California Santa Barbara A Modular Force Microscope for Soft Matter Paul Roberts, Johns Hopkins University 2:45 to 3:10 p.m. Evaluating Energy Dissipation and Estimating Work of Adhesion in Adhesive Elastic Spherical Contact Dooyoung Baek, Seoul National University
3:10 to 3:35 p.m.
3:35 to 4:00 p.m.
BREAK
4:00 to 4:25 p.m.
4:25 to 4:50 p.m.
4:50 to 5:15 p.m.
5:15 to 5:40 p.m.
Mechanophore Activation in a Crosslinked Polymer Matrix via Instrumented Indentation Chelsea Davis, Purdue University
Effects of Prestrain, Outdoor Aging and Simultaneous Strain Cycling on the Durability of Building Sealants Greg Schueneman, USDA Forest Service Forest Products Laboratory
Self-Arresting Fatigue Crack Growth Specimen Nick Shephard, Dow Corning Corporation
Depth Profiling of UV Curing Materials Using Interface-Cutting Method Ji-Won Park, Seoul National University Mechanoluminescent Visualization: Behavior of Crack Propagating and Fracture Frontline on DBC Test Nao Terasaki, National Institute of Advanced Industrial Science & Technology
9 6th WCARP & Adhesion Society 41st Annual Meeting
Tribology
Toucan, 2nd Floor Moderators & Session Chairs: Frederic Restagno, UniversitĂŠ Paris-Sud & Noshir Pesika, Tulane University
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
Friction by Dislocation Motion between Shape-Complementary Interfaces Anand Jagota, Lehigh University Contact and Friction of a Stretched Rubber Antoine Chateauminois, ESPCI Interstitial Water Enhances Sliding Friction Alex Nyarko, University of Akron 2:45 to 3:10 p.m. Effect of Adhesion on Graphene-Optical Fiber Sensor in Corrosion Detection Chenglin Wu, Missouri University of Science & Technology
3:10 to 3:35 p.m.
3:35 to 4:00 p.m.
BREAK
4:00 to 4:50 p.m.
4:50 to 5:15 p.m.
5:15 to 5:40 p.m.
Anomalous Potential Dependent Friction on Au (111) Measured by AFM Leila Pashazanusi, Tulane University
Keynote
Frictional Damage and Wear in Engineering and Bio-Materials: Role of Adhesion (Stiction) and Stick-Slip Sliding Jacob Israelachvili, University of California Adhesion Force Measurements Using Atomic Force Microscopy on Polymer Surfaces Felix Zimmer, WIWeB Foam Entrainment on Rough Solids Frederic Restagno, UniversitĂŠ Paris-Sud
Novel Chemistry & Structure for New Properties Macaw, 2nd Floor Moderator: Andreas Hartwig, Fraunhofer IFAM Session Chairs: Erich Bain, U.S. Army Research Laboratory & Aaron Forster, National Institute of Standards & Technology
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
Rediscovering Silicones: MQ and MT Copolymers Thomas McCarthy, University of Massachusetts Rate Dependent Mechanicas in Crosslinked Polymer Networks Joseph Lenhart, Army Research Laboratory Well Defined Eugenol-Based Epoxy Resins by Thiol-ene Reaction and Performance of 3D Networks Jue Cheng, Beijing University of Chemical Technology 2:45 to 3:10 p.m. Thermal Reversible Structure Design and Property of Thermosetting Resin 3D Network Junying Zhang, Beijing University of Chemical Technology
10
3:10 to 3:35 p.m.
3:35 to 4:00 p.m.
BREAK
4:00 to 4:25 p.m.
4:25 to 4:50 p.m.
4:50 to 5:15 p.m.
5:15 to 5:40 p.m.
Sustainable Anaerobic Adhesives Lester Bennington, Henkel Corporation
Room Temperature Michael Addition Reactions for Adhesive Design Tim Long, Virginia Tech Michael Addition Click Reactions for Structural Adhesives: Structure-Property Relationships Mingtao Chen, Virginia Tech The Reaction of Methylene Malonate and the Characterization of the Poly Methylene Shunki Osawa, University of Tokyo Cardanol as a Bio-Based Building Block for Improving Hydrophobicity of Structural Adhesives and Sealants Yun Mi Kim, Cardolite Corporation
Surface Contamination (Biofouling, Insects & Ice): Ice Adhesion Resistant Materials Testing Cockatoo, 2nd Floor Moderator: Hossein Sojoudi, University of Toledo Session Chairs: Christopher Wohl, NASA Langley Research Center & Hossein Sojoudi, University of Toledo
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 3:10 p.m.
3:10 to 3:35 p.m.
3:35 to 4:00 p.m.
BREAK
4:00 to 4:25 p.m.
4:25 to 4:50 p.m.
Super-Low Ice Adhesion Surfaces Zhiliang Zhang, Norwegian University of Science and Technology (NTNU) Is Development of Icephobic Surfaces Really Possible? Jeffrey Youngblood, Purdue University Keynote
Hydrophobic & Amphiphilic Strategies for Reducing Ice & Hydrate Adhesion Using Conformal Polymer Coatings Gareth McKinley, MIT Development of Icephobic Coatings: Lessons Learned from Fraunhofer IFAM Nadine Rehfeld, Fraunhofer IFAM
Preliminary Adhesion Testing Results of Refrigerated Ice on a Modified Lap Shear Layer Fixture Daniel Drabiak, NASA Glenn Research Center
11
Design and Development of a Laboratory-scale Ice Adhesion Testing Device Joseph Smith, NASA Langley Research Center
4:50 to 5:15 p.m.
5:15 to 5:40 p.m.
Experimental Study of Ice Adhesion on 3 Different Types of Ice Caroline Laforte, Anti-Icing Material International Laboratory Design, Develop and Calibration of a New Characterization Technique to Evaluate the Ice Adhesion on the Surface Materials Luca Mazzola, CIRA
Physical Properties & Design of Bioadhesives Frederic Restagno, UniversitĂŠ Paris-Sud
Boardroom, 2nd Floor
Moderators & Session Chairs: Boxin Zhao, University of Waterloo, Dan Sameoto, University of Alberta, & Jason Nadler, Georgia Institute of Technology
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
Robust and Flexible: The Role of Functional Gradients in the Adhesion of Fibrillar Attachment System Lars Heepe, Kiel University Fabrication and Characterization of Curved Mushroom-Like Fibers with Graded Elastic Modulus Elliot Geikowsky, Texas Tech University Smart Biomimetic Micro/Nanostructures Based on Liquid Crystal Elastomers Boxin Zhao, University of Waterloo 2:45 to 3:10 p.m. Methods to Fabricate Reversible VitonÂŽ Adhesive Membrane Teng Zhang, University of Alberta
3:10 to 3:35 p.m.
3:35 to 4:00 p.m.
BREAK
4:00 to 4:25 p.m.
4:25 to 4:50 p.m.
4:50 to 5:15 p.m.
5:15 to 5:40 p.m.
Revisiting the Generalized Scaling Law for Bond Strength of Adhesive Systems Ahmad Mojdehi, Virginia Tech
Keynote
Gecko-Inspired Wedge-Structured Dry Adhesives for Vacuum Application Yu Tian, Tsinghua University
Curved and Tilted Microplates for Directional Friction Serdar Gorumlu, Texas Tech University
The Effects of Pulling Angle and Preliminary Displacement on Attachment of Biomimetic Adhesive Jaekang Kim, Georgia Institute of Technology The Adhesive Performance of Anisotropic Dry Adhesive Fibers with Non-Circular Cross Sections Teng Zhang, University of Alberta
Final Program 2018 12
Frederic Restagno, UniversitĂŠ Paris-Sud Soft Adhesives
Rousseau Suite, 1st Floor Moderators & Session Chairs: Dale Haner, DHM Adhesives & Michael Bartlett, Iowa State University
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
Self-Adhesion of Unvulcanized Polar Elastomers Valentine Hervio, ESPCI Dissipative Mechanisms in Foamed Tape Debonding Antoine Fleury, ESPCI Effect of Binary Molecular Weight on Adhesion and Flexibility Properties of UV-Curable PSA Gyuseong Shim, Seoul National University 2:45 to 3:10 p.m. Failure Mechanisms of PSAs under Shear Loading Helen Minsky, ESPCI
3:10 to 3:35 p.m.
3:35 to 4:00 p.m.
BREAK
4:00 to 4:25 p.m.
4:25 to 4:50 p.m.
4:50 to 5:15 p.m.
5:15 to 5:40 p.m.
Importance of Substrate Functionality on the Adhesion and Debonding of a Pressure Sensitive Adhesive Preetika Karnal, Johns Hopkins University
Polysilane as an Adhesive for Poly- -Olefins Takashi Nishino, Kobe University
A Novel Bionspired Underwater Adhesive Using Complex Coacervation Marco Dompe, Wageningen University & Research
Enhancing Dry Adhesion through Structured Stiff Components in Soft Composites Kevin Turner, University of Pennsylvania Parameter Identifications in Constitutive Relations for Finite Deformations of Viscoelastic Adhesives Romesh Batra, Virginia Tech
13 6th WCARP & Adhesion Society 41st Annual Meeting
5:30 to 8:30 p.m. Poster Session & Reception Chair: Qiang Luo, Avery Dennison
Rousseau Suite, 1st Floor 1. S urface Topography Modification and Growth Factor Desorption Through Polyelectrolyte Multilayers Ivan Ding, Worcester Polytechnic Institute 2. P hoto-Polymerized Adhesives for Biological Tissues Christophe Derail, University of Pau 3. T ough Hydrogels for Underwater Adhesion Ping Rao, Hokkaido University 4. A nalysis of UV Deterioration of Ethylene-Vinyl Acetate Copolymer Using Pyrolysis-Gas Chromatography/Mass Spectrometry, and Fourier Transform Infrared Spectroscopy Chris Macey, Shimadzu Scientific Instruments, Inc-North America 5. Geometric Control of Adhesion Inspired by Mussel Plaque/ Thread Structures Marcela Areyano, Univeristy of California Santa Barbara 6. D irect determination of mixed-mode cohesive law in composite joints Naresh Datla, Indian Institute of Technology 7. T he Influence of Âľm-topography on the Adhesion Strength of Thermoset (Fiber Reinforced) Plastics Felix Zimmer, WIWeB 8. R heology Modifiers for Epoxy Based Adhesives Chetali Gupta, PPG 9. S tructural Sandwich Composites Out of Wood-Foam Core and Textile Reinforced Concrete Sheets Gregor Wisner, Institute of Joining and Welding 10. C uring Behavior and Thermal Properties of Foamed Structural Epoxy Adhesives Containing Rubber Modified Epoxy Resin Jongho Back, Seoul National University 11. T hin Polymeric Film Adhesion Through the Transition Between Surface Wrinkling and Delamination Hyeyoung Son, Purdue University 12. M easuring Work of Adhesion of Polystyrene Microspheres Russell Schmitz, NC State University 13. A crylic Pressure Sensitive Adhesive with Nanodiamond Kota Mizutani, Kobe University 14. B io-inspired Under-water Adhesive for Infrastructure Maintenance Masanobu Naito, National Institute for Materials Science (NIMS) Final Program 2018 14
15. A dhesion Properties and Flexibility of Silicone PSA Catalyzed by Platinum for Flexible Display Jung-Hun Lee, Seoul National University 16. D esigned Surface Hardness Gradient for Ice Adhesion Reduction Christopher Wohl, NASA Langley Research Center 17. A ccelerated Degradation of Single Lap Joints and Metal-Plastics Assemblies Using a Pressure Vessel with Heat and Moisture Masahiro Funabashi, National Institute of Advanced Industrial Science and Technology (AIST) 18. M easure Sliding Angle for Sessile Drops Alidad Amirfazli, York University 19 . H ighly Stretchable Multifunctional Composites with Tunable Thermal Conductivity Ravi Tej Anand Tutika, Iowa State University 20. A lumosilicate Nanoparticles in Epoxy: Influence on the Macroscopic Properties Maren Weidner, Saarland University 21. P reparation of Intumescent Flame-Retardant EVA Sheet and its Mechanical Behavior Jaeho Shin, Seoul National University 22. D eciphering the Adhesive Properties of Mussel-Inspired Metal-Coordinate Physical Gels Erica Lai, MIT 23. S urface Modification of the Rubber Material by the Addition of the Fluorine-Containing Copolymers and the Fabrication of Nano-Structures Koji Honda, Hyogo Prefectural Institute of Technology 24. H ierarchical Carbon Nanotube-Alumina Oxide Fiber Reinforced Composites and Oxide Hydration Kinetics Ajay Krishnamurthy, National Institute of Standards & Technology 25. M easuring Solid Liquid Work of Adhesion using Centrifugal Adhesion Balance Semih Gulec, Lamar University 26. P reparation of High Thermal Insulating Multi-Layer Sheet by using Hybrid Curing System Kyengbo Sim, Seoul National University 27. U ltra-Long Lifetime Water Bubbles Stabilized by Negative Pressure Generated Between Micro Particles Jin Yang, California Institute of Technology 28. Developing a Test Method to Interrogate Adhesion between High and Low-Density Woods Kayla Howes, Virginia Tech 29. S tick to it: Mechanistic Diversity in Biological Adhesive Systems Alyssa Stark, Villanova University
15 6th WCARP & Adhesion Society 41st Annual Meeting
30. M echanical Behaviour of a Silicone Based Adhesive Under Combined Axial and Shear Loading Conditions Julien Jumel, University of Girona 31. E valuation of Crack Onset Conditions Julien Jumel, University of Girona 32. E valuating Paper Wet-Strength Adhesives Without Using Paper Dong Yang, McMaster University 33. C haracterization and Improvement of Interfacial Strength in 3D Printed Nylon/Carbon Fiber Composites W. Douglas Hartley, Virginia Tech 34. S ynthesis and Adhesion Performance of Acrylic Polymer/ Mica Organoclay Nanocomposite PSAs Hoon Kim, Seoul National University 35. A dhesion Performance of High Molecular Weight Acrylic Elastomer in Flexible Display Applications Gyuseong Shim, Seoul National University 36. A luminum Surface Preparation Options for Improved Structural Adhesive Lap Joint Performance Marvin Pollum, PPG 37. S liding Friction of Liquid-Infused Surfaces Ziad Rashed, Virgnia Tech 38. P romotes Osteoblast Cell Adhesion and Proliferation by Recombinant Mussel von Willebrand Factor (vWF) Young Hoon Song, Yeungnam University 39. I mprovement on Properties of Epoxy Resins by Blending Thermoplastic Micro Particles Noriaki Fukuda, Sumitomo Seika Chemicals 40. B inding mechanism of Collagen and von Willebrand Factor interaction in Marine Underwater Adhesion Ngoc Bich Tran, Pohang University of Science and Technology 41. R eactive Polyurethane Adhesive During and After Crosslinking in Dry Conditions: Chemistry, Polymer Dynamics and Mechanical Properties Bettina Zimmer, Saarland University 42. N GS: An Analysis Tool Toward Deep Understanding of Specific Peptide-Surface Interactions Carmen Juds, Humboldt-Universität zu Berlin 43. I mpact of Substrates and Environmental Aging on Adhesively Bonded Lightweight Joints Loubna Pagnotti, PPG 44. U V Curable Pressure Sensitive Adhesive with High Heat-Resistance and Insulation Jinuk Hwang, Seoul National University 45. A dhesion Properties of the Polymer Substrates of Plasma Treatment Jae Hwan Chun, Korea Institute of Footwear and Leather
Final Program 2018 16
46. B io-inspired Polymeric Surfaces with Controllable Underwater Adhesion Properties Ugo Sidoli, Leibniz-Institut für Polymerforschung Dresden 47. C ontribution of Calcium Ion in Sugar Adhesion Jeong Hyun Seo, Yeungnam University 48. D etection of Trace Silicone Contamination on CFRP Surfaces by Picosecond LIBS Rodolfo Ledesma, University of Virginia 49. P rimer Effect on Interface Structure and Adhesion of Cyanoacrylate/Isotactic Polypropylene Takashi Nishino, Kobe University 50. I nvestigation of Fracture Energy and Process Zone on the Adhesive Joints Using Ductile Adhesive Koji Kamiyama, Mitsubishielectric Corporation 51. M icrowave-assisted Easy Debonding of Adhesives Containing Ionic Liquid Mirei Usuba, Kobe University 52. P hase Structures and Probe-Tack Properties of Silicone PSAs Hajime Kishi, University of Hyogo 53. C ool-off Function and Heat Resistance of Pressure Sensitive Adhesives Bearing Side-Chain Groups Hiroto Murakami, Nagasaki University 54. U rea as a Monomer for the Design of Poly(dimethyl siloxane)-Containing Polyureas as Antifouling Coatings and Elastomeric Sealants Shantel Schexnayder, Virgniai Tech 55. D roplet Manipulation on a Surface via Triboelectrification Matthew Cackovic, Colorado State University 56. A tomic Force Microscopy for Analyzing Adhesion of Paint and Plastic Surfaces in Disney Animation Cells Carolyn Carta, University of California 57. E ffect of Curing Conditions on the Adhesive Strength of Cyanoacrylate Resin Miyuki Kosugi, Takushoku University 58. Effect of Highly-Aligned Nanoscale Surface Structures on Microbial Adhesion Irene (Yiying) Wang, Virginia Tech 59. Enabling Composite-to-Metal Bonding through the Automotive OEM Assembly Line Kar Tean Tan, PPG Coatings Innovation Center 60. Covalent Adhesion of Poly(ether ether ketone) through Surface Epoxidation Akira Miyagaki, Kobe University 61. UV-Healable Supramolecular Glass Based On π-π Stacking and Hydrogen-Bonding Interactions Cole Sorensen, Virginia Tech
17 6th WCARP & Adhesion Society 41st Annual Meeting
6:00 – 7:00 a.m.
5K Run sponsored by L&L Products, 3M Company, BTG Labs, Lawter
S tart the morning off right with a 5K
Fun Run in San DIego. Interested attendees should meet in the hotel lobby at 5:45am. Maps will be provided.
7:00 a.m. – 5:00 p.m.
Registration
Kon Tiki Ballroom Foyer, 2nd Floor
7:00 – 7:45 a.m.
Networking Breakfast
Rousseau Suite, 1st Floor
8:00 – 8:45 a.m.
Plenary Talk II:
Leveling of Thin Polymer Films
Elie Raphael, ESPCI Kon Tiki Ballroom, 2nd Floor
8:45 – 9:00 a.m.
est Poster Award B Presentation
Kon Tiki Ballroom, 2nd Floor
Morning Technical Sessions 9:00 a.m. to Noon Novel Tools & Methods for Characterizations: Combined Stressors Kon Tiki Ballroom, 2nd Floor
Moderator: Chelsea Davis, Purdue University Session Chairs: Chelsea Davis, Purdue University & Aaron Forster, National Institute of Standards & Technology
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
10:40 to 11:05 a.m.
11:05 to 11:30 a.m.
Novel Multiscale Characterization of Carbon Nanotube Grafted Fiber-Reinforced Polymer Composites Ajay Krishnamurthy, National Institute of Standards & Technology Multi-Scale Metrology for Visualization and Characterization of Interphase Failure Richard Sheridan, National Institute of Standards and Technology Applications of Digital Image Correlation in Adhesive Testing Mark Oliver, Veryst Engineering
Keynote
Carbon Nanotube Based Hierarchical Composites with Modified Interfaces for Enhanced Adhesion and In-situ Sensing Erik Thostenson, University of Delaware Development of a Cohesive Zone Element for Adhesive Joints Subjected to Fatigue and Humidity Degradation Marcelo Costa, INEGI
Final Program 2018 18
11:30 to 11:55 a.m. T he Interplay of Chemical and Physical Aging in a Diglycidylether of Bisphenol A (DGEBA) Epoxy Cured Jamie Kropka, Sandia National Laboratories
11:55 a.m. to 12:15 p.m. odification of Chemically Stable Polymeric Materials 98. Improvement M of the Adhesion Property of FRP and CFRP for Car/Aircraft-Use and the Preparation of FRP with a Strong Interface Adhesion Hitoshi Kanazawa, Fukushima University
Additive Manufacturing I. Interfaces and Fracture in 3D-Printed Structural Materials Toucan, 2nd Floor
Moderator: Erich Bain, U.S. Army Research Laboratory Session Chairs: Erich Bain, U.S. Army Research Laboratory, Michael Bortner, Virginia Tech & Amy Peterson, Worcester Polytechnic Institute & Jonathan Seppala, National Institute of Standards & Technology
9:00 to 9:25 a.m.
Keynote
9:25 to 9:50 a.m.
Keynote
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
10:40 to 11:05 a.m.
11:05 to 11:30 a.m.
11:30 a.m. to Noon
Development and Current Processes for Additive Manufacturing David Bourell, University of Texas at Austin Polymer Powders for Laser Sintering Manfred Schmid, ETH Zurich Evaluation and Development of High Performance Polymer Powder Feedstocks for Additive Manufacturing Erich Bain, U.S. Army Research Laboratory
Weld performance of ABS and PC in Material Extrusion Additive Manufacturing Jonathan Seppala, National Institute of Standards & Technology Analyzing Interlayer Adhesion of Poly(ether imide) in Material Extrusion AM Michael Bortner, Virginia Tech
E nhanced Bonding of Immiscible Polymers via Intermixed Co-extrusion in Fused Deposition Modelling Mohammad Abu Hasan Khondoker, University of Alberta
Transportation: Characterization and Modeling of Adhesives in Transportation Applications Macaw, 2nd Floor Moderator: Kay Blohowiak, The Boeing Company Session Chairs: Aaron Mann, LORD Corporation & Kay Blohowiak, The Boeing Company
9:00 to 9:25 a.m.
High Strength and Lightweight Solutions for Automobile Industry Jun Qu, Sika Technology AG
19 6th WCARP & Adhesion Society 41st Annual Meeting
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
10:40 to 11:05 a.m.
11:05 to 11:30 a.m.
11:30 a.m. to Noon
Study of the Dynamic Behaviour of Composite Adhesive Joints for the Automotive Industry Eduardo Marques, INEGI An Experimental Evaluation of Mode I Fracture Energy of Adhesive Joint by DCB Test Asuka Hayashi, Tokyo Institute of Technology
Wrinkles and Cracks — Quantifying the Mechanical Properties of Polycarbonate Thin Films Shawn Chen, Northwestern University Determination of Constitutive Equation of an Adhesive for Car Body Structure Norihide Abe, Tokyo Institute of Technology
A pplication of the Time-Cure-Temperature Superposition Principle for Calculation of Viscoelastic Tobias Aubel, Paderborn University
Material and Interfaces for Soft and Electronic Technologies Cockatoo, 2nd Floor
Moderators & Session Chairs: Chris Campbell, 3M Company, Michael Bartlett, Iowa State University & Robert Style, ETH Zurich
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
Dynamically Tuning Dry Adhesion Using Elastomer-Metal Composites Wanliang Shan, University of Nevada, Reno Morphological Studies and Mechanical Properties of Epoxy-Foam Adhesives in Automotive Application Jongho Back, Seoul National University A Lightweight, Low-Power Clutch Based on Fast, Reversible Electroadhesion Stuart Diller, Carnegie Mellon University BREAK
10:40 to 11:05 a.m.
11:05 to 11:30 a.m.
Tunable Kirigami Metamaterials through Hybrid Structures Dohgyu Hwang, Iowa State University
Keynote
L iquid Metals as Soft, Stretchable, and Reconfigurable Conductors: The Importance of the Interfacial Michael Dickey, North Carolina State University
11:30 a.m. to Noon umerical Investigation on the Influence of Contact Shape in Biologically N Inspired Fibrillar Adhesives Mattia Bacca, University of British Columbia
Final Program 2018 20
Structural Adhesives: Tough and Multifunctional High Performance Adhesives Boardroom, 2nd Floor
Moderators: Mike Bonner, Saint Clair Systems, Inc., Xuejian Lyu, Worcester Polytechnic Institute, & Malte Mund, Institute of Joining and Welding Session Chairs: Aaron Forster, National Institute of Standards & Technology & Erich Bain, US Army Research Laboratory
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
10:40 to 11:05 a.m.
11:05 to 11:30 a.m.
11:30 a.m. to Noon
Adhesives Morphology and Its Influence on the Properties of Polymer-Ceramic Composites Andreas Hartwig, Fraunhofer IFAM The Mechanisms of Toughness in Heterogeneous Adhesives Felicity Guild, Imperial College London Manufacturing Limits of Toughened Structural Epoxies Declan Carolan, Imperial College London
The Effect of Curing System and Nano Silica Particles on Heat Resistance of Epoxy Composite Kyungmin Kim, Seoul National University Surface Modification of Polyetheretherketone (PEEK) through Vacuum-UV Pre-Treatment for Structural Adhesive Bonding Elisa Arikan, WIWeB, Universität der Bundeswehr München
A dhesive and Mechanical Characterization of Ferromagnetic Nanoparticle Reinforced Polyamide Hot Melt Adhesives Erik Stitt, Michigan State University
Noon to 1:30 p.m. Lunch on Your Own Enjoy San Diego
2019 Program Planning Meeting Plumeria Suite (located on the ground floor – outside of the main building by the pool area)
21 6th WCARP & Adhesion Society 41st Annual Meeting
Afternoon Technical Sessions 1:30 to 5:40 p.m. Transportation: Joining Composites and Dissimilar Materials in Transportation Applications Kon Tiki Ballroom, 2nd Floor
Moderator: Aaron Mann, LORD Corporation Session Chairs: Aaron Mann, LORD Corporation & Kay Blohowiak, The Boeing Company
1:30 to 2:20 p.m.
2:20 to 2:45 p.m.
Keynote
The Role of Structural Adhesives in Transforming Aerospace Designs Kay Blohowiak, The Boeing Company Strength of CFRP Joints reinforced with Aluminum Laminates Ricardo Carbas, INEGI - FEUP 2:45 to 3:10 p.m. Highly Hydrophobic and Durable Coatings for Tomorrow’s Vehicles Richard Menini, National Research Council
3:10 to 3:35 p.m.
3:35 to 4:00 p.m.
BREAK
4:00 to 4:25 p.m.
4:25 to 4:50 p.m.
4:50 to 5:15 p.m.
5:15 to 5:40 p.m.
A Novel Lightning Protecting Adhesive Films for CFRP Zhongjie Zhao, AVIC Composite Corporation Ltd.
Weld Bonding Aluminum and Steel with a Structural Epoxy and Vaporizing Foil Actuator Welding Brian Ufferman, Ohio State University
Hybrid Weld-Bond Joining Technology of Light Metal Alloys Saleema Noormohammed, NRC Canada
Insitu-Press-Molding of FRP Parts onto Metallic Parts for Highly Loaded Car Structure Fabian Fischer, Volkswagen AG Optimization of Metal Based Bipolar Plates (BPP) for the Use in Automotive Hydrogen Fuel Cells by Replacing Welding with Conductive Adhesives as a Low Cost Bonding Technology Dennis Weiser, Technische Universitaet Braunschweig, Institute of Joining and Welding
Final Program 2018 22
Surface Contamination (Biofouling, Insects & Ice): Contaminant Adhesion Resistant Surfaces Toucan, 2nd Floor
Moderator: Christopher Wohl, NASA Langley Research Center Session Chairs: Christopher Wohl, NASA Langley Research Center & Hossein Sojoudi, University of Toledo
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
Performance and Durability of Transparent Functional Coatings for Automotive Sensors Sabrina Peczonczyk, Ford Motor Company
Applied Strain on Sealant Samples Exposed to Outdoor Weathering Chris White, National Institute of Standards & Technology
Thermal Alternating Polymer Nanocomposite (TAPNC) Coating Designed to Prevent Aerodynamic Insect Fouling Ghoku Krishan, Hawaiian Airlines 2:45 to 3:10 p.m. Polymer-Filled Composite Metal Foams for Contamination Resistant Aircraft Leading Edges Christopher Wohl, NASA Langley Research Center
3:10 to 3:35 p.m.
3:35 to 4:00 p.m.
BREAK
4:00 to 4:25 p.m.
4:25 to 4:50 p.m.
4:50 to 5:15 p.m.
5:15 to 5:40 p.m.
Corrosion, Drag, UV-Degradation and Adhesion Properties of Nanostructured Superhydrophobic Thin Film Dilip Sarkar, University of Quebec at Chicoutimi
Passive Anti-Frosting Surfaces Using Microscopic Ice Patterns Farzad Ahmadi, Virginia Tech A Comparative Study to Evaluate the Anti-/De-Icing Performance of Various Hydro-/Ice-phobic Coating Hui Hu, Iowa State University Impact of Solar Radiation on Ice Adhesion and Shedding Ahmed Abdelaal, University of Toledo Development of a New Methodology to Evaluate the Rain Erosion Resistance of Icephobic Coatings Caroline Laforte, Anti-Icing Material International Laboratory
Elasticity & Capillarity in Adhesion Macaw, 2nd Floor Moderators & Session Chairs: Michael Bartlett, Iowa State University & Robert Style, ETH Zurich
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
A Bio-inspired Design for a Switchable Elastocapillary Adhesive Matthew Butler, University of Oxford 23
Keynote
Surface Tension-Induced Functionalization of Soft Materials Arnaud Antkowiak, UniversitĂŠ Pierre et Marie Curie
2:20 to 2:45 p.m.
Effect of Surface Stress on the Transmission of Line Force on an Elastic Half Space Chung Yuen Yuen Hui, Cornell University 2:45 to 3:10 p.m. Poroelastic Dissipation of Thin Hydrogel Layers Mechanically Confined Within Contacts Antoine Chateauminois, ESPCI
3:10 to 3:35 p.m.
3:35 to 4:00 p.m.
BREAK
4:00 to 4:25 p.m.
4:25 to 4:50 p.m.
4:50 to 5:15 p.m.
5:15 to 5:40 p.m.
Adhesion in Crumpled Thin Film Structures Andrew Croll, North Dakota State University
Indentation vs. Rolling: Dependence of Adhesion on Contact Geometry for Biomimetic Structures Anand Jagota, Lehigh University
Elastocapillary Adhesion of Slender Objects: from Wetting to Peeling Camille Duprat, Ecole Polytechnique
Patterned Substrates with Wetting Contrast for Droplet Manipulation Victor Breedveld, Georgia Institute of Technology Multi-Layered Feathers Enable Robust Underwater Superhydrophobicity Jonathan Boreyko, Virginia Tech
Organismal Adhesion Cockatoo, 2nd Floor
Moderators & Session Chairs: Alyssa Stark, Villanova University & Alexis Noel, Georgia Institute of Technology
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
Sticky Microbes – Microalgae Switch their Adhesiveness by Light Oliver Baumchen, Max Planck Institute for Dynamics and Self-Organization Preventing Barnacle Adhesion Using Re-entrant Surface Microstructures Dennis Petersen, University of Kiel
Effect of Seawater pH and Composition on the Structural Maturation of Marine Mussel Adhesive Plaques Emmanouela Filippidi, University of California Santa Barbara 2:45 to 3:10 p.m. One Animal, Two Glues: Insights on How Oysters Stick Jonathan Wilker, Purdue University
3:10 to 3:35 p.m.
3:35 to 4:00 p.m.
BREAK
4:00 to 4:50 p.m.
Effect of Ionic Functional Groups on the Oxidation State and Interfacial Binding Property of Catechol-Based Adhesive Ameya Narkar, Michigan Technological University
Keynote
Dynamics of Prey Prehension by Chameleons through Viscous Adhesion Pascal Damman, University of Mons Final Program 2018 24
4:50 to 5:15 p.m.
5:15 to 5:40 p.m.
Adsorption Dynamics of Photoactive Microalgae to Surfaces Alexandros Fragkopoulos, Max Planck Institute for Dynamics and Self-Organization
Picky Placement: A Study of Remora Attachment Brooke Flammang, New Jersey Institute of Technology
Peebles Awards Session Boardroom, 2nd Floor
Moderators & Session Chairs: Tim Long, Virginia Tech & Eric Silverberg, Henkel Corporation
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
Damage Monitoring of Adhesively Bonded Steel-Composite Joints Using Carbon Nanotube Based Skins Sagar Doshi, University of Delaware
Interfacial Temperature in Desktop and Large-Scale Material Extrusion Anthony D’Amico, Worcester Polytechnic Institute
Modification of Chemically Stable Polymeric Materials 99. Improvement of Adhesion Property of Silicone Resin, Fluorocarbon Resin, FRP,CFRP and CFRTP Aya Inada, Fukushima University 2:45 to 3:10 p.m. A Proof of the Navier Interfacial Equation through Quantitative Comparison between Solid-Polymer Melt and Solid-Elastomer Friction Marceau Henot, CNRS
3:10 to 3:35 p.m.
3:35 to 4:00 p.m.
BREAK
4:00 to 4:25 p.m.
4:25 to 4:50 p.m.
Molecular Level Understanding of the Effect of Humidity on Adhesion of Spider Aggregate Glue Saranshu Singla, University of Akron
Viscoelasticity and Phase Behavior of H-Bonded Polymers: Solvent Composition, and Charge Effect Yaoyao Chen, Northwestern University Puncture Mechanics of Soft Gels at Small Length Scales Shruti Rattan, University of Massachusetts
25 6th WCARP & Adhesion Society 41st Annual Meeting
Plasma on Surface and Interfaces Rousseau Suite, 1st Floor
Moderators & Session Chairs: Carlos Barrios, 3M Company & Mark Strobel, 3M Company
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
Plasma Surface Preparation of Aluminum for Bonding Aircraft Fasteners Robert Hicks, Surfx Technologies LLC
Adhesion Property of Heat-Assisted Plasma-Treated Polytetrafluoroethylene (PTFE) Yuji Ohkubo, Osaka University Surface Modification of Polyacrylonitrile Membrane Using Pulsed DC Discharge of N2 and NH3 Plasma Sudarsan Neogi, Indian Institute of Technology 2:45 to 3:10 p.m. Comparative Adhesion and Surface Properties of Wood Plastic Composites Treated with Atmospheric Pressure Plasma Torch and Low Pressure Plasma JosĂŠ Martin-Martinez, University of Alicante
3:10 to 3:35 p.m.
3:35 to 4:00 p.m.
BREAK
4:00 to 4:25 p.m.
4:25 to 4:50 p.m.
4:50 to 5:15 p.m.
5:15 to 5:40 p.m.
Keynote
Hydrophobic Recovery of Corona-treated Polypropylene Mark Strobel, 3M Company
Adhesion of Living Cells to Plasma-modified Surfaces Michael Wertheimer, Ecole Polytechnique de MontrĂŠal Keynote
Plasma Enhanced Chemical Vapor Deposition of Polymer Films for Engineering Interfaces Mark Foster, University of Akron Factors Affecting Quality and Consistency of Plasma Treatments for Composite Materials Giles Dillingham, BTG Labs LLC Surface Treatment Effects for Polypropylene Surface Studied by Sum-Frequency Generation Vibrational Tomoya Sato, National Institute of Advanced Industrial Science and Technology
6:30 to 8:30 p.m. Banquet Dinner
Featuring Dr. Robert Allen, IBM Almaden Research Kon Tiki Foyer & Ballroom, 2nd Floor
Final Program 2018 26
7:00 – 5:00 p.m.
Registration
Kon Tiki Ballroom Foyer, 2nd Floor
7:00 – 7:45 a.m.
Networking Breakfast
Rousseau Suite, 1st Floor
8:00 – 8:45 a.m.
Plenary Talk III:
Innovative Adhesive Surfaces from Bioinspiration to Robotics and Medicine
Eduard Arzt, Leibniz Institute for New Materials Kon Tiki Ballroom, 2nd Floor 8:45 – 9:00 a.m.
eebles & Alan Gent P Awards Presentations
Kon Tiki Ballroom, 2nd Floor
Morning Technical Sessions 9:00 a.m. to Noon Transportation: Soft-Hard Interface Challenges in Transportation Kon Tiki Ballroom, 2nd Floor
Moderator: Aaron Mann, LORD Corporation Session Chairs: Aaron Mann, LORD Corporation & Kay Blohowiak, The Boeing Company
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
10:40 to 11:05 a.m.
11:05 to 11:30 a.m.
11:30 a.m. to Noon
Study of Self-Adhesion Mechanisms between Elastomer and Composite Materials Cécile Granat, CNRS–Université de Bordeaux Adhesion Mechanisms of Vinyl Siloxanes and Hydro Siloxanes on Aluminum Oxides Artur Kochanke, Robert Bosch GmbH Durability Evaluation of SGA Structural Adhesive Joint Consisting of Millimeters Order Thickness of Adhesive Layer for Shipbuilding Toshiaki Iwata, National Institute of Maritime
Fast Polymerization at Low Temperature of Epoxy-Amine Adhesive, by Infra-Red Irradiation Sébastien Genty, Socomore Locally Tailored Bondline Properties for Structural Automotive Applications Stefan Kreling, Volkswagen Group Research
S tudy of the Behaviour of Adhesive Joints of Steel with CFRP under Aging Conditions in Aggressive Environments for its Application in Bus Structures. Pedro Gálvez Villarino, Universidad Carlos III de Madrid
27 6th WCARP & Adhesion Society 41st Annual Meeting
Structural Adhesives: Composites Joining and Matrix Adhesives Toucan, 2nd Floor
Moderators: Kar Tean Tan, PPG Coatings Innovation Center & Declan Carolan, Imperial College London Session Chairs: Aaron Forster, National Institute of Standards & Technology & Erich Bain, U.S. Army Research Laboratory
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
10:40 to 11:05 a.m.
11:05 to 11:30 a.m.
11:30 a.m. to Noon
Role of Weak Adhesion and Craze Shortening in Fracture Mechanisms of Rigid Particulate-Filled Poly(methyl methacrylate) Erich Bain, U.S. Army Research Laboratory Heat Curing Behavior and Properties of Heat Curable Film based on Epoxy as Xlinking Functional Group Shijian Wang, Seoul National University Influence of Internal Release Agent Content and Surface Topography on Bonding Properties of Fiber Reinforced Plastics Malte Mund, Institute of Joining and Welding
Influence of Alumosilicate Nanoparticles on the Cross-Linking in Epoxy Maren Weidner, Saarland University End Milling of CFRP for the Surface Preparation of Adhesively Bonded Joints Jens de Freese, WIWeB Novel Intrinsically Self-Healing Polyurethane Adhesives Wolfgang Geuking, Croda Inc.
Rheology & Adhesion Macaw, 2nd Floor Moderators & Session Chairs: Ali Dhinojwala, University of Akron & Vivek Sharma, University of Illinois Keynote
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
10:40 to 11:05 a.m.
Early Stages of Contact Formation between Polymer Melts and Debonding at Short Contact Times Anke Lindner, ESPCI Rheological Design of Yield-Stress Fluids Arif Nelson, University of Illinois Correlating Stickiness to Pinch-off Dynamics and Extensional Rheology Response of Polymer Solutions Vivek Sharma, University of Illinois
Extensional Rheology of Mussel-Inspired Metal-Coordinate Gels Bavand Keshavarz, MIT
Final Program 2018 28
11:05 to 11:30 a.m.
11:30 a.m. to Noon
A Mixed-Mode Fracture Criterion Based on Nonlinear Maxwell Element Springs Alex Arzoumanidis, Psylotech, Inc.
T hermoresponsive Hydrophilic Pressure-Sensitive Adhesives Mehdi Vahdati, ESPCI
Surface Preparation for Bonding: Metallic Substrates Cockatoo, 2nd Floor
Moderator: Frank Palmieri, NASA-LARC Session Chairs: Frank Palmieri, NASA-LARC & Dan Knorr, US Army Research Laboratory
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
10:40 to 11:05 a.m.
11:05 to 11:30 a.m.
11:30 a.m. to Noon
Adhesion Mechanisms of Silicones on Native Aluminum In Situ FTIR-ERAS Studies Wulff Possart, Saarland University Mechanism of Surface Treatments for Adhesive Bonding of Aluminum Alloys Shin Horiuchi, AIST Evaluation of Alumina Grit Particulate Size & Removal Procedures on GritBlast/Sol-Gel Surface Preparation Process Corey Kondash, Air Force Research Laboratory
Surface Coating of Al Products for Salt and Acid Water-Durable Adhesive Bonding Yusuke Takahashi, Kobe Steel, Ltd. Development of a Repair Method for Metal and ThermoplasticFiber-Reinforced Fusion Bonded Joints Kristian Lippky, Institute of Joining and Welding
P olymer Topology in Surface Absorption of Binary Blends Giuseppe Pellicane, University of Kwazulu-Natal
Soft Materials for Electronics: Advances in Flexible and Foldable Electronics Boardroom, 2nd Floor
Moderators & Session Chairs: Chris Campbell, 3M Company, Michael Bartlett, Iowa State University & Robert Style, ETH Zurich
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
Designing Adhesives for Cryogenic Applications in Microelectronics Joseph Dennis, IBM Research Bioinspired Nanocomposites for Electrically Conductive Adhesives Wei Zhang, PEG LLC
29 6th WCARP & Adhesion Society 41st Annual Meeting
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
10:40 to 11:05 a.m.
11:05 to 11:30 a.m.
11:30 a.m. to Noon
Keynote
Key Materials of Emerging Panel Process for Foldable AMOLED and Fan-out Panel Level Package Jia Cho Ho, Industrial Technology Research Institute (ITRI)
Effects of Sample Preparation Method on Adhesive Tensile Impact Testing Sam Carpenter, 3M Company Adhesion Performance and Recovery of Acrylic PSA for Flexible Display Applications Jung-Hun Lee, Seoul National University
F olding Test Method Control and Differentiation of Material Subassemblies Hollis Beagi, 3M Company
Noon to 1:30 p.m. Lunch on Your Own Enjoy San Diego
For more information visit www.adhesionsociety.org Final Program 2018 30
Afternoon Technical Sessions 1:30 to 5:40 p.m. Wettability & Surface Interactions Kon Tiki Ballroom, 2nd Floor
Moderators & Session Chairs: Alidad Amirfazli, York University & Chuck Extrand, Colder Products Company
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
Contact Angle and Adhesion Dynamics and Hysteresis on Molecularly Smooth Chemically Homogeneous Surf Szu-Ying Chen, University of California Santa Barbara Metamorphic Superomniphobic Surfaces Arun Kota, Colorado State University Antifouling Behavior and Hydration States of Charged Polymer Brushes at Aqueous Interfaces Atsushi Takahara, Kyushu Univeristy 2:45 to 3:10 p.m. Keynote Fluidic Microassembly with Surface Tension Effects Pierre Lambert, UniversitĂŠ libre de Bruxelles (ULB)
3:10 to 3:35 p.m.
3:35 to 4:00 p.m.
BREAK
4:00 to 4:25 p.m.
4:25 to 4:50 p.m.
4:50 to 5:15 p.m.
5:15 to 5:40 p.m.
Drop Impact on a Super Cooled Surface Varun Kulkarni, University of Illinois, Chicago
Spontaneous Droplet Motion on a Periodic Compliant Substrate Anand Jagota, Lehigh University
A Novel Approach to Measure Liquid and Solid Surface Energy Alidad Amirfazli, York University
Modeling of the Topographical Control of Capillary Forces at Solid-Solid Interface Ravi Jaiswal, Indian Institute of Technology Jumping and Bouncing of Liquid and Solid Drops on Surfaces Jonathan Pham, University of Kentucky
Bioadhesive Chemistry Toucan, 2nd Floor
Moderators & Session Chairs: Niels Holten-Andersen, Massachusetts Institute of Technology & Haeshin Lee, Korea Advance Institute of Science
1:30 to 1:55 p.m.
Towards Enhanced Paper Recycling with Degradable Microgel Wet-strength Adhesives Dong Yang, McMaster University
31 6th WCARP & Adhesion Society 41st Annual Meeting
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
Lignin Based Polyurethanes Adhesion to Native Aluminum Surfaces Demetrio Jackson dos Santos, UFABC
Preparation and Adhesive Properties of Silicone Contained Bio Epoxy Hong Fan, Zhejiang University 2:45 to 3:10 p.m. Evaluation of Dopamine Additives in Epoxy Resins for Structural Adhesive Applications Ngon Tran, Pohang University of Science and Technology
3:10 to 3:35 p.m.
3:35 to 4:00 p.m.
BREAK
4:00 to 4:25 p.m.
4:25 to 4:50 p.m.
4:50 to 5:15 p.m.
5:15 to 5:40 p.m.
Specifically Interacting Polymers: Can Chemists Still Learn Anything from Mussels? Hans Boerner, Humboldt Universität zu Berlin
Keynote
The Role of Redox Chemistry in Mussel Adhesion Herbert Waite, University of California Wet Adhesive Nanomaterials Inspired by the Barnacle Adhesive Kathryn Wahl, Naval Research Laboratory Salt Triggers the Simple Coacervation of an Underwater Adhesive When Cations Meet Aromatic π Electrons in Seawater Dong Soo Hwang, Pohang University of Science and Technology Sticky trapping fluids of pitcher plants: Rheology and contribution of polysaccharides Victor Kang, University of Cambridge
Fracture Mechanics: Bond Geometry Effects in Structural Adhesive Failure Macaw, 2nd Floor Moderator: Chenglin Wu, Missouri University of Science and Technology Session Chairs: Chenglin Wu, Missouri University of Science and Technology & Bamber Blackman, Imperial College London
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
Revisiting the Double-Cantilever Beam: Root Rotations, Effective Cracks, Shear and Elastic Foundation M.D. Thouless, Missouri University of Science and Technology
An Optimization Approach for Determining Interfacial Interactions Kenneth Liechti, University of Texas at Austin
Structural Methacrylate Adhesive Experimental and Numerical Modeling in Mode I Agathe Jaillon, ISAE-SUPAERO 2:45 to 3:10 p.m. Mode I Energy Release Rate Measurement for Low Bending Stiffness Adherend Bonded with a High Toughened Adhesive Katsuo Komatsu, Tokyo Institute of Technology Final Program 2018 32
3:10 to 3:35 p.m.
3:35 to 4:00 p.m.
BREAK
4:00 to 4:25 p.m.
4:25 to 4:50 p.m.
4:50 to 5:15 p.m.
5:15 to 5:40 p.m.
Effects of Bondline Discontinuity during Growth of Interface Crack Michal Budzik, Aarhus University
The Mode II Fracture of Structural Adhesive Joints Bamber Blackman, Imperial College London Strength Prediction of Ultra-High Strength Steel Single Lap Joints Using Cohesive Zone Based Modeling Approach Rakesh Goyal, John Deere India Pvt Ltd Modeling Mixed-Mode Dry Transfer of Graphene using Cohesive Zone Models and Classical Beam Theory Shruti Jain, University of Texas Rate and Temperature Dependency of Joints Used in the Oil Industry Joao Reis, Universidade Federal Fluminense – UFF
Particulate Adhesion Cockatoo, 2nd Floor
Moderator & Session Chair: Carson Meredith, Georgia Institute of Technology
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
Keynote
Engineering Shape Anisotropic Suction Caps for Targeted Delivery of Actives Huda Jerri, Firmenich, Inc.
Effect of Particle Size on Self-Pinning for the Coffee Ring Formation on Hydrophobic Surfaces Li-Jen Chen, National Taiwan University Keynote
Novel Responsive Gels and Gecko Leg Particles with Strong Adhesion Enabled by Multiphasic Liquid Orlin Velev, North Carolina State University 2:45 to 3:10 p.m. Rheological Behavior of Microgel Dispersions Eva Dieuzy, Université de Pau et des Pays de l’Adour
3:10 to 3:35 p.m.
3:35 to 4:00 p.m.
BREAK
4:00 to 4:25 p.m.
4:25 to 4:50 p.m.
4:50 to 5:15 p.m.
Ultra-Long Lifetime Water Bubbles Stabilized by Negative Pressure Generated between Micro Particles Jin Yang, California Institute of Technology
Adhesion of Silica and Ethyl Cellulose Particles at Air-Water and Oil-Water Interfaces Songcheng Wang, Georgia Institute of Technology Particle Adhesion to Rising Gas Bubbles and to Oil-Coated Bubbles Sven Behrens, Georgia Institute of Technology Reversible Nanoparticle Attachment to a Fluid Interface Joelle Frechette, Johns Hopkins University 33 6th WCARP & Adhesion Society 41st Annual Meeting
5:15 to 5:40 p.m.
Sticking to Today’s Paints: The Consumer Product Development Chapter Nishant Kumar, 3M Company
Gel Adhesion and Mechanics Boardroom, 2nd Floor
Moderator & Session Chair: Costantino Creton, ESPCI
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
ShearVviscosity on Hydrogels Mattia Bacca, University of British Columbia Some Strategies of Gel Toughening: Thermoresponsive Toughening with Crack Bifurcation in Phase-Separated Hydrogels under Isochoric Conditions Session Keynote: Alba Marcellan, ESPCI-UPMC-CNRS Mechanical Relaxation Spectra of Supramolecular Metal-Coordinate Crosslinks in Polymer Gels Niels Holten-Andersen, Massachusetts Institute of Technology 2:45 to 3:10 p.m. Effect of Fibrous Skeleton in Polyampholyte Hydrogel on Adhesion in Water Takayuki Kurokawa, Hokkaido University
3:10 to 3:35 p.m.
3:35 to 4:00 p.m.
BREAK
4:00 to 4:25 p.m.
4:25 to 4:50 p.m.
4:50 to 5:15 p.m.
5:15 to 5:40 p.m.
Keynote
Extreme Contact Mechanics: Puncture of Soft Gels Alfred Crosby, University of Massachusetts
Scaling Toughness with Macro-scale Double Network Composites Daniel King, Hokkaido University Surface Effects in Gel Adhesion Robert Style, ETH Zurich From Electrostatic Interactions to Macroscopic Underwater Adhesion Francisco Cedano, ESPCI 80 Years of Shear Lag: Historical and Future Perspectives of Volkersen’s Insight Michael Bartlett, Iowa State University
6:30 to 9:00 p.m. 2018 Women’s Networking Reception Chair: Helen Minsky, ESPCI Boardroom, 2nd Floor
Final Program 2018 34
7:00 a.m. – Noon
Registration
Kon Tiki Ballroom Foyer, 2nd Floor
7:00 – 7:45 a.m.
Networking Breakfast
Rousseau Suite, 1st Floor
8:00 – 8:45 a.m.
Plenary Talk IV: Novel Hydrogels with Reversible Sacrificial Bonds
Jian Ping Gong, Hokkaido University
Kon Tiki Ballroom, 2nd Floor
8:45 – 9:00 a.m.
Closing Remarks
Kon Tiki Ballroom, 2nd Floor
Morning Technical Sessions 9:00 a.m. to Noon Fracture Mechanics for Complex Environments Kon Tiki Ballroom, 2nd Floor
Moderator: Chenglin Wu, Missouri University of Science and Technology Session Chairs: Chenglin Wu, Missouri University of Science and Technology & Bamber Blackman, Imperial College London
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
10:40 to 11:05 a.m.
11:05 to 11:30 a.m.
11:30 a.m. to Noon
Experimental Characterization and Numerical Lifetime Prediction of Adhesively Bonded Joints Serkan Cavdar, Paderborn University Study of the Behavior of Metal Single Lap Joints under Fatigue Conditions Joao Reis, Universidade Federal Fluminense - UFF Effect of Moisture on the Mixed-Mode Traction-Separation Relations of a Glass/Epoxy Interface Kenneth Liechti, University of Texas at Austin
Adhesive Tape Solutions for Structural Timber-Concrete-Composite Joints with Fast Heated Bondlines Gregor Wisner, Institute of Joining and Welding Wrinkles and Cracks — Quantifying the Mechanical Properties of Polycarbonate Thin Films Shawn Chen, Northwestern University
ater-Based Peeling of Thin Hydrophobic Films W Christophe Poulard, University Paris Sud-Orsay
35 6th WCARP & Adhesion Society 41st Annual Meeting
Wettability & Surface Interactions Toucan, 2nd Floor
Moderators & Session Chairs: Alidad Amirfazli, York University & Chuck Extrand, Colder Products Company Keynote
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
10:40 to 11:05 a.m.
11:05 to 11:30 a.m.
11:30 a.m. to Noon
Mapping Microscale Wetting Variations on Biological and Synthetic Water-repellent Surfaces Robin Ras, Aalto University A Study of Surface Energy using Centrifugal Adhesion Balance (CAB) Sakshi Yadav, Lamar University Spontaneous Draining of Liquids from Vertically-oriented Tubes Chuck Extrand, Colder Products Company (CPC)
Inverse Cassie-Baxter Regime and Air-Wicking Effect Revealed by Captive Bubble Experiments Miguel Cabrerizo, University of Granada Comparative Study of Contact Angles Using Liquid and Needle Dosing Methods Raymond Sanedrin, KRUSS USA
echanical Behaviour of a Silicone Based Adhesive under Combined Axial M and Shear Loading Conditions Julien Jumel, University of Girona
Additive Manufacturing: Interfaces and Fracture in 3D-Printed Soft Materials Macaw, 2nd Floor Moderator: Michael Bortner, Virginia Tech Session Chairs: Erich Bain, U.S. Army Research Laboratory, Michael Bortner, Virginia Tech & Amy Peterson, Worcester Polytechnic Institute
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
Tuning Polymeric Interfaces in 3D Printing: From Structural Polyimides to Poly(dimethylsiloxane) Elastomers Tim Long, Virginia Tech Photo-activated, Simultaneous Chain Extension and Crosslinking for Lithographic 3D Printing of Siloxanes Eduardo Marques, INEGI Keynote
A Polymer Science Perspective on Improving Additive Manufacturing Mark Dadmun, University of Tennessee
Final Program 2018 36
10:40 to 11:05 a.m.
11:05 to 11:30 a.m.
11:30 a.m. to Noon
Keynote
The Importance of Adhesion for Multifunctional Printing of Liquid Metal on Polymers Michael Dickey, North Carolina State University Informatics Approach to Understanding Material Extrusion Additive Manufacturing Amy Peterson, Worcester Polytechnic Institute
uiding Crack Propagation in Photopatterned Dual-Cure Polymer Networks G Lewis Cox, National Institute of Standards and Technology
Surface Preparation for Bonding: Diffusion Bonding Cockatoo, 2nd Floor
Moderators: Dan Knorr, US Army Research Laboratory & Ngon Tran, Pohang University of Science and Technology Session Chairs: Frank Palmieri, NASA-LARC & Dan Knorr, US Army Research Laboratory
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
10:40 to 11:05 a.m.
11:05 to 11:30 a.m.
Instant Underwater Glue Prepared by Polyvinyl Alcohol and Polyphenolic Compound Honggu Hwang, Korea Advance Institute of Science and Technology Fusion Bonding of Fiber Reinforced Plastics Using Inductive Heating Hinrich Grefe, Technische Universität Braunschweig Changing the Polarity at the Interface Franz Landen, Ribler GmbH
Parameter Identification for Modelling CTE-mismatch Damage of Adhesive Bonds Michael Griese, Technische Universitat Adhesive Bonding of Polypropylene with Alkylborane Containing Adhesives Haruhisa Akiyama, National Institute of Advanced Industrial Science & Technology
37 6th WCARP & Adhesion Society 41st Annual Meeting
Structural Adhesives: Adhesives Performance in Extreme Environments Boardroom, 2nd Floor
Moderators: Felicity Guild, Imperial College London Session Chairs: Aaron Forster, National Institute of Standards & Technology & Erich Bain, US Army Research Laboratory
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:40 a.m.
BREAK
10:40 to 11:05 a.m.
11:05 to 11:30 a.m.
A Shift in Perspective to Leveraging Adhesives Standards to Encourage Novel Formulation Development Robert Jensen, U. S. Army Research Laboratory The Impact of Temperature on Bead Profile and Adhesion Michael Bonner, Saint Clair Systems, Inc. Adhesion Performance and Thermal Decomposition Behavior of Intumescent Flame-Retardant EVA system Jaeho Shin, Seoul National University
Humidity History in Polyelectrolyte Complexes Xuejian Lyu, Worcester Polytechnic Institute Atomistic Modeling on Adhesion of Polyurea and Silica Aerogel Interface Wei Gao, University of Texas at Austin
Final Program 2018 38