General Information Final Program Content Executive Committee & General Information....................................... page 1 Sunday Schedule & Award Sponsors................................................... page 2 Monday Schedule............................................................................... page 3 Poster Session & Reception.............................................................. page 11 Tuesday Schedule............................................................................. page 13 Wednesday Schedule........................................................................ page 21
Registration/Information Hours Santee Ballroom Foyer, First Floor Sunday, February 17 Monday, February 18 Tuesday, February 19 Wednesday, February 20
Noon – 5:00 p.m. 7:00 a.m. – 5:00 p.m. 7:00 a.m. – 5:00 p.m. 7:00 – 8:00 a.m.
Executive Committee President Tim Long, Virginia Tech
Members at Large Michelle Seitz, DSM Eric Silverberg, Henkel Corporation Immediate Past President Alyssa Stark, Villanova University Greg Schueneman USDA Forest Products Laboratory Bioadhesion Division Chair Bruce Lee, Michigan Technological Vice President University Al Crosby Structural Adhesives Division Chair University of Massachusetts Aaron Forster Secretary National Institute of Standards & Technology Chelsea Davis Soft Adhesives Division Chair Purdue University
Treasurer Charles Shuster Franklin International Inc.
Editor Shantanu Ranade 3M Company
Michael Bartlett, Iowa State University Home Office Manager/Onsite Contact Malinda Armstrong, The Adhesion Society 2019 Program Chair Nick Shephard, Dow Chemical Company Chris Wohl, National Aeronautics and
Space Administration
Santee Ballroom Salon D, First Floor
2019 Exhibitors
• Anton Paar • ASI Magazine • BTG Labs • Cardolite Corporation • Nanoscience Instruments • Photron USA, Inc. • Imass, Inc. • Psylotech, Inc. • IOP Publishing • SHIMADZU Scientific Instruments • KRUSS Scientific • Trilion Quality Systems Instruments, Inc.
Proceedings* In keeping with the continuing efforts to make our event more environmentally friendly, hard copies of presentations will not be available. You can locate the proceedings either on flash drive, which was included in your packet, or on the Adhesion Society website. *Not all presenters have authorized The Adhesion Society to publish their abstract.
1 The Adhesion Society 2019
Please recycle this program when done.
Noon to 5:00 p.m. Registration
Santee Ballroom Foyer, First Floor
1:30 to 4:45 p.m. 2 019 Award for Excellence in Adhesion Society Symposium Sponsored by 3M – Al Crosby, University of Massachusetts Santee Ballroom Salons EFHG, First Floor 1:30 p.m. Introductory Remarks Carlos Barrios, 3M Company 1:45 p.m. Stretching and Coiling of Micro-Scale Helices under Flow Anke Lindner, ESPCI 2:15 p.m. 25 Years of Studying the Gecko Adhesion System - What Have We Learned? Duncan Irschick, University of Massachusetts at Amherst 2:45 p.m. Deformation Behavior of Auxetic Disordered Networks Edwin Chan, NIST 3:15 p.m. Model Studies of Cure, Tack and Fracture in Epoxy Resins for Composites Applications Ken Shull, Northwestern University 3:45 p.m. BREAK 4:15 p.m. Bioinspired Materials Mechanics: Interfaces and Instabilities Al Crosby, University of Massachusetts & 2019 Award of Excellence Recipient 4:45 p.m. Celebrating the Leaders in Adhesion Science
1:30 – 6:00 p.m. Exhibition
Santee Ballroom Salon D, First Floor
5:00 – 6:00 p.m. Business Meeting
Santee Ballroom Salons EFHG, First Floor
6:30 – 8:30 p.m. President’s Reception & Dinner
Oceanfront Beach Pavilion
Annual Meeting Sponsors A special “THANK YOU” to our generous sponsors:
• Adhesion Society Award for Excellence in Adhesion Science sponsored by 3M • The Robert L. Patrick Fellowship Award sponsored by The Adhesion Society • Distinguished Paper Award sponsored by the Henkel Corporation • Peebles Awards for Graduate Student Research in Adhesion Science by the Adhesion Society • Alan Gent Distinguished Student Paper Award sponsored by Henkel Corporation • Best Poster Award sponsored by Avery Dennison • Adhesion Society Early Career Scientist Award sponsored by the Adhesive & Sealant Council • 5K Run sponsored by 3M Company and Lawter • Tuesday Coffee Break sponsored by PPG
7:00 a.m. – 5:00 p.m.
Registration
7:00 – 7:45 a.m.
Networking Breakfast
8:00 – 8:45 a.m.
lenary Talk I: P Soft Controllable Adhesives for Robotic Gripping
Santee Ballroom Foyer, First Floor Santee Ballroom Salon D, First Floor
Metin Sitti, Max Planck Institute for Intelligent Systems Session Chair: Chris Wohl, National Aeronautics and Space Administration
Santee Ballroom Salons EFHG, First Floor
Morning Technical Sessions 9:00 a.m. to Noon Additive Manufacturing
Santee Ballroom Salon A, First Floor Session Chairs: Michael Bortner, Virginia Tech & Amy Peterson, Worcester Polytechnic Institute Keynote
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:45 a.m.
BREAK
10:45 to 11:00 a.m.
11:00 to 11:15 a.m.
11:15 to 11:30 a.m.
Additive Manufacturing for Improving the Interface Properties in Laminated Composites Pavana Prabhakar, University of Wisconsin-Madison Patterned Interfaces with Enhanced Toughness Kevin Turner, University of Pennsylvania Amorphous and Semi-Crystalline Weld Formation in Material Extrusion Additive Manufacturing Jonathan Seppala, National Institute of Standards & Technology
Thermal Modeling of Material Extrusion Additive Manufacturing from FFF to BAAM Amy Peterson, Worcester Polytechnic Institute First Principles Modeling of Fused Filament Fabrication: Analysis of Interlayer Adhesion Michael Bortner, Virginia Tech
S elective Laser Sintering of Polymer Powders: Material Challenges and Military Applications Erich Bain, U.S. Army Research Laboratory
11:30 to 11:45 a.m.
11:45 a.m. to Noon
3
T ailoring Polymer Design and Interfaces for Additives Manufacturing Emily Wilts, Virginia Tech E ffect of Crystallinity and Morphology on Interlayer Properties of Additively Manufactured PP Blends Arit Das, Virginia Tech
Materials and Interfaces for Soft Technology: Materials, Electronics, & Adhesives Santee Ballroom Salon B, First Floor
Session Chairs: Michael Bartlett, Iowa State University & Edwin Chan, National Institute of Standards & Technology
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:45 a.m.
BREAK
10:45 to 11:00 a.m.
11:00 to 11:15 a.m.
11:15 to 11:30 a.m.
11:30 to 11:45 a.m.
11:45 a.m. to Noon
Self-Renewable Gecko-Like Adhesives? A Bioengineering Approach in Adhesive Design Aranzazu del Campo, INM-Leibniz Institute for New Materials Keynote
Shaping Slender Structures Douglas Holmes, Boston University Adhesion with Slender Structures Andrew Croll, North Dakota State University
Kirigami-Inspired Materials for Mechanical and Adhesion Control Doh-Gyu Hwang, Iowa State University Tunable Dry Adhesion of Elastomeric Posts Enabled by Stiffness Tuning of LMPA Microfluidic Channels Wanliang Shan, University of Nevada, Reno Shape Memory Polymers as Practical Dry Adhesives Seok Kim, University of Illinois at Urbana-Champaign Collaborative Effects in the Detachment of Micropatterned Dry Adhesives RenĂŠ Hensel, INM - Leibniz Institute for New Materials Optimal Property Distribution Across an Interface to Achieve Equal Load Sharing Mattia Bacca, University of British Columbia
Organismal Adhesion
Santee Ballroom Salon C, First Floor Session Chairs: Lars Heepe, University of Kiel & Alyssa Stark, Villanova University
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:45 a.m.
BREAK
Adhesive Performance of Sea Urchins (Strongylocentrotus Purpuratus) on Rock Substrates Alyssa Stark, Villanova University Snail Epiphragm Inspired Intrinsically Reversible Superglues Shu Yang, University of Pennsylvania Keynote
Adhesive Prey Capture Threads of Spider Orb Webs Brent Opell, Virginia Tech
42nd Annual Meeting Final Program 4
10:45 to 11:00 a.m.
11:00 to 11:15 a.m.
11:15 to 11:30 a.m.
11:30 to 11:45 a.m.
Effect of Humidity and Setal Surface Chemistry on Gecko Adhesion Saranshu Singla, University of Akron Walking Well on Rough Substrates: Specialized Tenent Setae in Attachment Pads of the Black Earwigs Lars Heepe, Kiel University The Influence of Material Stiffness and Substrate Roughness on the Fouling Dynamics of Balanus Improvisus: a Field Test Dennis Sebastian Petersen, University of Kiel Hairy, Thorny Suckers May be the Answer to Resilient Underwater Adhesion Alexis Noel, Georgia Institute of Technology
Novel Tools and Methods for Characterization Savannah Junior Ballroom B, Main Lobby
Session Chairs: Chelsea Davis, Purdue University & Aaron Forster, National Institute of Standards & Technology
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:45 a.m.
10:45 to 11:00 a.m.
11:00 to 11:15 a.m.
11:15 to 11:30 a.m.
11:30 to 11:45 a.m.
Polymer Thin Film Adhesion Utilizing the Transition from Surface Wrinkling to Delamination Chelsea Davis, Purdue University Chemical and Physical Aging of Epoxies Jamie Kropka, Sandia National Laboratories Stickiness, Elasticity and Extensional Viscosity of Polymeric Complex Fluids Vivek Sharma, University of Illinois at Chicago
BREAK
Exploring Soft Fracture through Cutting Shelby Hutchens, University of Illinois Urbana-Champaign Interfacial Evaluation of Glass Fiber Reinforced Ring-Opening Metathesis Polymer-Based Composites Daniel Knorr, Jr., US Army Research Laboratory
Toughening and Damage Tolerance in Adhesive Joints Marco Alfano, University of Calabria
Evaluation of Adhesive Joining Design Based of Mechanoluminescence Visualization Nao Terasaki, National Institute of Advanced Industrial Science & Technology
5 The Adhesion Society 2019
Fundamentals of Wetting
Savannah Junior Ballroom A, Main Lobby Session Chair: Chuck Extrand, Colder Products Company Keynote
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:45 a.m.
10:45 to 11:00 a.m.
11:00 to 11:15 a.m.
11:15 to 11:30 a.m.
11:30 to 11:45 a.m.
11:45 a.m. to Noon
Dynamic Superhydrophobicity – Towards Magnetic Control over Droplet Motion Etienne Barthel, CNRS/Saint Gobain Dewetting of a Liquid Substrate Venkata Yashasvi Lolla, University of Illinois at Chicago Drainage from a Fluid Handling Component due to Inclination Chuck Extrand, Colder Products Company
BREAK
Dielectrowetting Controlled Detachment and Re-attachment of Bubbles Glen McHale, Northumbria University Dynamic Capillary Pressure in Oscillating Liquid Bridges James Ferri, Virginia Commonwealth University
Influence of Varying Gravity on Pendant and Sessile Drops Semih Gulec, Lamar University
A Comparison of Two Portable Contact Angle Measurement Instruments Taylor Kobe, 3M Company Omniphobic Metal Surfaces Exhibiting Low Contact Angle Hysteresis and Substrate Tilt Angles Atsushi Hozumi, AIST
Noon to 1:30 p.m. Lunch on Your Own Enjoy Hilton Head
Bioadhesives Division Meeting Charleston Room, Second Floor
Soft Adhesives Division Meeting Dorchester Room, Second Floor
Structural Adhesives Division Meeting Jasper Room, Second Floor 42nd Annual Meeting Final Program 6
Afternoon Technical Sessions 1:30 to 5:30 p.m. Transportation: Automotive, Aerospace, Rail Santee Ballroom Salon A, First Floor
Session Chairs: Nathan Tortorella, John Deere Technology Center & Alejandra Alvarez Albarran, Zymergen
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
2:45 to 3:10 p.m.
3:10 to 3:35 p.m.
BREAK
3:35 to 3:50 p.m.
3:50 to 4:05 p.m.
4:05 to 4:20 p.m.
4:20 to 4:35 p.m.
4:35 to 5:00 p.m.
Analysis of Formulation and Aging-Dependent Failure Phenomena of Bonded Sheet Molding Compounds Verena Assmuth, Paderborn University Keynote
PPG: Adhesives and Sealant Innovations Maria French, PPG Industries, Inc. Eco-Friendly Isocyanate Blocking Agent, Cardanol: Optimization of Deblocking Conditions and Its Contribution to Adhesion Performances Yun Mi Kim, Cardolite Corporation Adhesive Joining of Composite Laminates Using Epoxy Resins with Stoichiometric Offset Frank Palmieri, NASA-LARC
Understanding the Effect of Interactions between Seam Sealers and Multilayered Coating Systems Kar Tean Tan, PPG Industries, Inc.
Durability of Aluminum Adhesives Masayuki Nakajima, PPG Industries, Inc.
Developments in Weld Bonding Similar and Dissimilar Material Combinations using Vaporizing Foil Actuator Welding Brian Ufferman, Ohio State University Evaluating Fracture Energy of Over Molded Composites near Mode I Conditions Douglas Hartley, Virginia Tech Adhesive Bonding of Carbon Fiber Reinforced Polymers to Advanced High Strength Steel Yong Chae Lim, Oak Ridge National Laboratory
7 The Adhesion Society 2019
Materials and Interfaces for Soft Technology: Soft Robotics Santee Ballroom Salon B, First Floor
Session Chairs: Burak Aksak, Texas Tech University & Dan Sameoto, University of Alberta
1:30 to 1:55 p.m..
1:55 to 2:20 p.m
2:20 to 2:45 p.m.
2:45 to 3:10 p.m.
3:10 to 3:35 p.m.
BREAK
3:35 to 3:50 p.m.
3:50 to 4:05 p.m.
4:05 to 4:20 p.m.
4:20 to 4:35 p.m.
Keynote
Soft-Matter Engineering through Integration of Fluids, Elastomers, Metals, and Semiconductors Carmel Majidi, Carnegie Mellon University Direct Printed Multi-Material Soft Robots by Fused Deposition Modelling Dan Sameoto, University of Alberta Interplay and Coupling between Liquid Metal and Solid Particles in Multiphase Composites Ravi Tej Anand Tutika, Iowa State University Liquid Metals for Soft Robotics: Unusual Wetting Properties Michael Dickey, North Carolina State University
Multi-Material Bonding and Integration for Soft Robots Dan Sameoto, University of Alberta Multifunctional Liquid Crystal Polymer Networks for Soft Robotic Applications Li Yu, Waterloo Institute for Nanotechnology 3D-Printed Liquid Metal Interconnects for Stretchable Electronics Callen Votzke, Oregon State University Designing Robust Materials for Soft Robotics Michael Bartlett, Iowa State University
Chemical Adhesion Santee Ballroom Salon C, First Floor Session Chairs: Niels Holten-Andersen, MIT & Jonathan Wilker, Purdue University
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
2:45 to 3:10 p.m.
Molecular Level Studies on Buried Interfaces between Polymers and Mussels Adhesives or Barnacles Zhan Chen, University of Michigan Composition and Structure of Oyster Cement Provides Unique Materials Properties Rebecca Metzler, Colgate University Reversible Supramolecular Assembly of Velvet Worm Slime: Molecular Mechanisms of a Mechanoactivated Matthew Harrington, McGill University Bioinspired Ionic Adhesives Marleen Kamperman, Wageningen University 8
3:10 to 3:35 p.m.
BREAK
3:35 to 3:50 p.m.
3:50 to 4:05 p.m.
4:05 to 4:20 p.m.
4:20 to 4:35 p.m.
4:35 to 5:00 p.m.
Poly(ethylene glycol)-based Quadruple Hydrogen Bonding Supramolecular Polymers for Material Extrusion Additive Manufacturing Processes Xi Chen, Virginia Tech Finding Peptide Binders for Polypropylene using Phage Display and Next Generation Sequencing Carmen Juds, Humboldt-Universität zu Berlin Non-aqueous Photo-activated Soft Tissue Adhesive with Tunable Viscoelastic Properties Gautama Wicaksono, Nanyang Technological University Donor and Acceptor Voltage Activated Co-Blend Adhesive Nigel Chew Shun Tan, NTU Singapore Oxidation and Reduction: Working to Understand and Stop Mussel Adhesion Jonathan Wilker, Purdue University
Pressure Sensitive Adhesives
Savannah Junior Ballroom B, Main Lobby Session Chair: Mattia Bacca, University of British Columbia
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
2:45 to 3:10 p.m.
3:10 to 3:35 p.m.
BREAK
3:35 to 3:50 p.m.
3:50 to 4:05 p.m.
Mechanics of an Adhesive Tape in a Zero Degree Peel Test: Effect of Large Deformation and Material Nonlinearity Chung- Yuen (Herbert yuen Hui), Cornell University Mapping Highly Nonlinear Deformation Field in Soft Material with a Particle Tracking Method Yuan Qi, University of Colorado Boulder Characterization of UV Curable Pressure Sensitive Adhesives for Stretchable Display Application Ju Hak Lee, Ulsan National Institute of Science and Technology Mineral Influence on Pressure Sensitive and Hot Melt Adhesives Kalena Stovall, IMERYS
Molecular Modeling of Pressure Sensitive Adhesives Charles Paul, Henkel Corporation
Quantitative Study of the Peel Test Using a Foamed Tape PSA Antoine Fleury, ESPCI Paris
9 The Adhesion Society 2019
4:05 to 4:20 p.m.
4:20 to 4:35 p.m.
4:35 to 5:00 p.m.
Developing a Reliable Measurement Method to Characterize the Surface Free Energy of Pressure Sensitive Adhesives Raymond Sanedrin, KRÜSS GmbH Morphology and Impact Resistance of Epoxy Foam-CSR Composites for Automobile Structural Adhesive Jongho Back, Seoul National University Zero VOC Waterborne Acrylic Coatings: Improving Properties with Cellulose Nanocrystals Carson Meredith, Georgia Tech
Lessons Learned from Adhesion Field/ Fundamentals of Wetting Savannah Junior Ballroom A, Main Lobby
Session Chair: Nick Shephard, Dow Chemical Company
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
2:45 to 3:10 p.m.
3:10 to 3:35 p.m.
BREAK
3:35 to 3:50 p.m.
3:50 to 4:05 p.m.
4:05 to 4:20 p.m.
4:20 to 4:35 p.m.
4:35 to 5:00 p.m.
Surface Treatment - A “must” in Adhesive Joining Saleema Noormohammed, NRC Canada Strategies for Durability Assessment Nick Shephard, Dow Chemical Company Effect of Microstructural Grain Properties on the Conductivity of Coated Flexible Paper Electrodes Gaurav Rawal, Indian Institute of Technology Kanpur Keynote
Adhesion in Automotive Electronics Hank Sanftleben, Aptiv
Fluorosurfactants in Adhesion to Low Surface Energy Surfaces Wayne Fan, 3M Company
Vulcanized Rubber Microstructures and Their Wettability Control by Elongation Yuji Hirai, Chitose Institute of Science and Technology
Leidenfrost Engine: From Spinning Droplets to Rotating Disks Glen McHale, Northumbria University Adsorption of Poly(vinyl alcohol) onto Polydimethylsiloxane via Adsorptive Spin Casting Wei Chen, Mount Holyoke College Manipulating Droplets on Slippery Lubricant Impregnated Surfaces Glen McHale, Northumbria University
42nd Annual Meeting Final Program 10
5:30 to 8:30 p.m. Poster Session & Reception Santee Ballroom Salon D, First Floor Session Chair: Nick Shephard, Dow Chemical Company 1. Formulating to Optimize Surface Tension in 100% Solids Adhesives Allison Condie, PPG Industries 2. Finding Peptide Binders for Polypropylene using Phage Display and Next Generation Sequencing Carmen Juds, Humboldt-Universität zu Berlin 3. Using Digital Image Correlation to Monitor the Degradation of Polyethylene Exposed to Weathering Chris White, National Institute of Standards & Technology 4. Characterization of Prepreg Tack for Composite Manufacturing by Automated Fiber Placement Christopher Wohl, NASA Langley Research Center 5. Drainage of Liquids from a Small Circular Hole in a Vertical Wall Chuck Extrand, Colder Products Company (CPC) 6. Estimating Work of Adhesion and Elastic Modulus of PDMS using Adhesive Spherical Contact System Dooyoung Baek, Seoul National University 7. Passive Anti-Frosting Cables Jonathan Boreyko, Virginia Tech 8. Patterned Desublimation for Promoting Anti-Frosting Surfaces Jonathan Boreyko, Virginia Tech 9. Incorporation of Functionalized Polyhedral Oligomeric Silsesquioxane Nanomaterials as Reinforcing Agents for Impact Ice Mitigating Coatings Joseph Smith, NASA Langley Research Center 10. High Throughput Adhesion Capability Development Kshitish Patankar, Dow Chemical Company 11. Light Debonding/Bonding Supramolecular Liquid Crystal Adhesive Cole Sorensen, Virgnia Tech 12. Mechanical Properties of PDMS Networks with and Without Free Chains Justin Glover, University of Kentucky 11 The Adhesion Society 2019
13. Investigation of Fracture Behavior of 2 Parts Acrylic Adhesive Masatomo Mikuni, Mitsubishi Electric Corporation 14. Improving Tracer Particle Surface Properties for Wind Tunnel Research: Studies on Surface Deposition Russell Schmitz, NC State University 15. Antifouling/Fouling-release Strategies for Marine Vessels: Amphiphilic Grafts on PDMS Elastomers Yi Wei, University of Florida - Materials Science and Engineering 16. Epoxy-Rubber Adduct for Enhanced Performance of Flexible Sealants Zhongwei Liu, Henkel Corporation 17. Enhancement of Intimate Surface Contact for Particle Adhesion Through Mechanical Property Tailoring Heather Liddell, U.S. Naval Research Laboratory 18. Influence of Primers on the Shear Strength of Teroson 9399 Ornella Tempo, Henkel Corporation 19. Drop Tribology on Solid Surfaces Sakshi Yadav, Lamar University 20. Novel Non-Isocyanate Dimethacrylate Cross-linked Amphiphilic Gels for Antifouling/Fouling-release Vishal Vignesh, University of Florida 21. Developing Test Method to Interrogate Adhesive Bond Between High- and Low-Density Woods Yuqin Li, Virginia Tech 22. Defect Sensitivity in Multilayer Thin Films Hannah Meeran, University of Massachusetts 23. The TUFF Method: Stretching Freestanding Ultra-Thin Glassy Polymer Films Konane Bay, University of Massachusetts 24. Effect of Microstructural Grain Properties on the Conductivity of Coated Flexible Paper Electrodes Gaurav Rawal, Indian Institute of Technology Kanpur 25. Nature-Inspired Anti-Adhesion Superhydrophobic Surfaces for Biomedical Applications Taeyoon Park, POSTECH 26. Optimization between Recovery and Relaxation of Acrylic PSA by UV Patterning for Flexible Display Jongho Back, Seoul National University 27. Rheological and Adhesion-related Case Studies at Exponent Michael Imburgia, Exponent, Inc. 42nd Annual Meeting Final Program 12
6:00 – 7:00 a.m.
5K run
ttendees should meet in the lobby at A 5:45 a.m. Maps will be provided. Sponsored by: 3M Company and Lawter
7:00 a.m. – 5:00 p.m.
Registration
7:00 – 7:45 a.m.
Networking Breakfast
8:00 – 8:45 a.m.
lenary Talk II: Adhesion P Challenges in Automotive Coating Systems
Santee Ballroom Foyer, First Floor Santee Ballroom Salon D, First Floor
Mark Nichols, The Ford Company Session Chair: Nick Shephard, Dow Chemical Company Santee Ballroom Salon EFGH, First Floor
8:45 – 9:00 a.m.
SC Career Center A Announcement, Best Poster Award, Early Career Scientist Award Presentations
Santee Ballroom Salon EFGH, First Floor
Morning Technical Sessions 9:00 a.m. to Noon Fracture Mechanics
Santee Ballroom Salon A, First Floor Session Chair: Chenglin Wu, Missouri University of Science and Technology
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:45 a.m.
BREAK
10:45 to 11:00 a.m.
11:00 to 11:15 a.m.
11:15 to 11:30 a.m.
Scaling Analyses for Mixed-Mode Transfer of 2D Materials Kenneth Liechti, University of Texas at Austin Modeling Interfacial Self-healing of Polymers with Dynamic Bonds Qiming Wang, University of Southern California Interfacial Toughness: Variation with Surface Roughness and Test Temperature David Reedy, Sandia National Laboratories
Effect of Joint Shape on Fracture Resistance of Soft Brittle Gel Subjected to Shear Load Krishna Kant Kundan, Indian Institute of Technology, Kanpur A Bond Rupture Model for the Mixed-Mode, Rate-Dependent Traction-Separation Relations Kenneth Liechti, University of Texas at Austin
A dhesion Rupture in Laminated Glass: Coupling to the Interlayer’s Rheology Paul Fourton, SIMM, ESPCI Paris/SGR Paris
13 The Adhesion Society 2019
11:30 to 11:45 a.m.
11:45 a.m. to Noon
easuring Adhesion between MXenes and Silicon M Chenglin Wu, University of Texas at Austin E rrors Associated with the use of the Experimental Compliance Method with Flexible Adhesive Layers Scott Case, Virginia Tech
Gels
Santee Ballroom Salon B, First Floor Session Chair: Daniel King, Hokkaido University
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:45 a.m.
BREAK
10:45 to 11:00 a.m.
11:00 to 11:15 a.m.
11:15 to 11:30 a.m.
Mechanical Reinforcement of Polymer Hydrogels via Metal-Coordinated Mineralization Niels Holten-Andersen, Massachusetts Institute of Technology Effect of pH on Adhesion of Pressure Sensitive Adhesives Underwater Preetika Karnal, Johns Hopkins University Quenched Polyampholyte Hydrogels as Adhesive Electrolytes: UCST, Specific Ion Effects, Low-Temperature Behaviors, and their Energy Device Applications Hyun-Joong Chung, University of Alberta
Underwater Adhesives based on Thermo Responsive Polyelectrolyte Coacervates Mehdi Vahdati, ESPCI Paris Synergistic Toughening in Fabric Reinforced Hydrogel Systems and their Applications Daniel King, Hokkaido University
T ough, Rapidly Swelling Thermoplastic Elastomer Hydrogels for Hemorrhage Control Erich Bain, US Army Research Laboratory
Biomed Pharma (Biomedical Adhesives) Santee Ballroom Salon C, First Floor
Session Chairs: Kolbe Ahn, University of Central Florida & Yuhan Lee, Brigham and Women’s Hospital, Harvard Medical School
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:45 a.m.
BREAK
10:45 to 11:00 a.m.
Pre-Clinical Medical Applications of Mussel Protein Bioadhesives Hyung Joon Cha, POSTECH Immiscible and Bioadhesive Stem Cell Sealant for Myocardial Infarction Taeyoon Park, POSTECH Keynote
Biomaterials with Unprecedented Mechanical Properties for Tissue Repair Jianyu Li, McGill University
Chitosan-based Surgical Glues Kolbe Ahn, University of Central Florida
14
11:00 to 11:15 a.m.
11:15 to 11:30 a.m.
11:30 to 11:45 a.m.
Polyester Melts that Display Viscosity-Induced Tissue-Specific Wet Adhesion Amal Narayanan, University of Akron
V oltage Curing of Voltaglue Bioadhesives via 3D-graphene Electrodes Manisha Singh, Nanyang Technological University ptimization of Two-Step Adhesive Coating for the Mitigation of Field O Associated Infection in Cetacean Satellite Telemetry Tags Rupak Rajachar, Michigan Technological University
Surface Preparation for Bonding
Savannah Junior Ballroom B, Main Lobby Session Chairs: Frank Palmieri, NASA-LARC & Rodolfo Ledesma, University of Virginia
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:45 a.m.
BREAK
10:45 to 11:00 a.m.
11:00 to 11:15 a.m.
11:15 to 11:30 a.m.
11:30 to 11:45 a.m.
Effect of Aluminum Surface Treatment on CFRP/Aluminum Adhesive Joint Properties Shin Horiuchi, AIST Investigations of Acid-Base Interactions and Work of Adhesion Using Interface-Sensitive Spectroscopy Michael Wilson, University of Akron Measurement of Surface Energy for Development and Control of Surface Treatment Processes: Dyne Solution Giles Dillingham, BTG Labs LLC
Enhancement of Adhesion Performance for CFRP-Steel Joints via Combined Treatments on CFRP Surface Dooyoung Baek, Seoul National University New Atmospheric Plasma Surface Treating Technology Wilson Lee, Enercon Industries Corporation
A dhesion on Polymer Surfaces with Nanometer-Scale-Topography Felix Zimmer, Wehrwissenschaftliches Institut fur Werk ineral-Polymer Interfacial Adhesion Impact on Product Performance M Kalena Stovall, IMERYS
15 The Adhesion Society 2019
Natural Phenomena: Ice, Insects, Marine, and other Contaminants Savannah Ballroom A, Main Lobby
Session Chair: Hadi Ghasemi, University of Houston
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:45 a.m.
BREAK
10:45 to 11:00 a.m.
11:00 to 11:15 a.m.
11:15 to 11:30 a.m.
An Experimental Study on the Durability of Icephobic Coatings Subjected to Water Droplet Erosion Hui Hu, Iowa State University A Quantitative, In-Situ Ice Adhesion Measurement System based on a Vibrating Cantilever Beam Alexandre Laroche, Airbus A Review of Engine Icing Edem Yannick Tetteh, University of Virginia
Experimental and Theoretical Studies of Wet Snow Accumulation on Inclined Cylindrical Surfaces Behrouz Mohammadian, University of Toledo Evaluation of Icephobic Coatings for Aerospace Applications Dimitris Priftis, Boeing
F undamentals of Liquid Interactions with Nano/Micro Engineered Surfaces at Low Temperatures Asif Raiyan, University of Toledo
11:30 to 11:45 a.m. urable Anti-Biofouling Surfaces D Hadi Ghasemi, University of Houston
Noon to 1:30 p.m. Lunch on Your Own Enjoy Hilton Head
2020 Program Planning Meeting Charleston, Second Floor
42nd Annual Meeting Final Program 16
Afternoon Technical Sessions 1:30 to 5:30 p.m. Dynamic Response and Fracture of Materials Santee Ballroom Salon A, First Floor
Session Chairs: Erich Bain, US Army Research Laboratory & Shelby Hutchens, University of Illinois at Urbana-Champaign
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
2:45 to 3:10 p.m.
3:10 to 3:35 p.m.
BREAK
3:35 to 3:50 p.m.
3:50 to 4:05 p.m.
4:05 to 4:20 p.m.
4:20 to 4:35 p.m.
4:35 to 5:00 p.m.
Keynote
Recent Studies in Adhesion of Polymer Composites: Experimental Measurements for Bitumen and Thermose Michael Sutton, University of South Carolina
Rate Dependent Mechanics of Crosslinked Polymer Networks Joseph Lenhart, US Army Research Laboratory
Exploring Magnetic Interactions between Beams: Cohesive Zone Models, Controllable Hysteresis, and Scaling Behavior David Dillard, Virginia Tech Peeling Instabilities in the Presence of Attractive Forces Andy Borum, Virginia Tech
Finite Deformation of the Rat Vagina Undergoing Inflation Jeffrey McGuire, Virginia Tech High Rate Mechanical Characterization of PSAs and Consistency with Linear Viscoelastic Behavior Evan Breedlove, 3M Company Quantitative Analysis of Spiropyran Mechanophore Activation in Multiple Network Elastomers Joshua Yeh, ESPCI Paris Role of Interfacial Wetting and Bonding in Energy Dissipation of ROMP Composites Erich Bain, US Army Research Laboratory Internal Strains to Visualize Fracture and Penetration of Soft, Biomimetic Gels at Intermediate Strain Rates Aaron Forster, National Institute of Standards & Technology
17 The Adhesion Society 2019
Elasticity & Capillarity in Adhesion Santee Ballroom Salon B, First Floor
Session Chair: Jonathan Pham, University of Kentucky
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
2:45 to 3:10 p.m.
3:10 to 3:35 p.m.
BREAK
3:35 to 3:50 p.m.
3:50 to 4:05 p.m.
4:05 to 4:20 p.m.
A Surface with Stress, Extensional Elasticity, and Bending Stiffness Anand Jagota, Lehigh University Microscale Contact of Soft PDMS Networks Jonathan Pham, University of Kentucky Origins of Adhesion Hysteresis Daniel Maksuta, University of Akron Competition between Viscous Forces and Elasticity in Soft Adhesion Joelle Frechette, Johns Hopkins University
Elastocapillary Behavior of High-Aspect-Ratio Nanoporous Microstructure Arrays Rama Annavarapu, University of Toledo Surface Roughness Dependent Adhesion: Finite Element Modeling and Analysis Weilin Deng, Brown University Adhesion on Heterogeneous Textured Surfaces Xavier Morelle, ESPCI
Biomed Pharma (Interfaces in Pharmaceutical Sciences) Santee Ballroom Salon C, First Floor Session Chairs: Adrian Defante, National Institute of Standards & Technology & Rupak Rajachar, Michigan Technological University
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
2:45 to 3:10 p.m.
3:10 to 3:35 p.m.
BREAK
3:35 to 3:50 p.m.
Surface and Interfacial Properties of Organic Crystalline Solids Jerry Heng, Imperial College London
Keynote
Formation of Protein Gels at Interfaces Ted Randolph, University of Colorado
Therapeutic Luminal Coating of the Intestine Yuhan Lee, Brigham and Women’s Hospital/Harvard Medical School Recent Advances in Understanding the Molecular Basis of Selectivity in Multimodal Protein Separation Steven Cramer, RPI
Solid-Vapor Interaction Causing Sucrose Crystallization in Colyophilized Formulations: Implications on the Final Product Stability Seema Thakral, University of Minnesota 18
3:50 to 4:05 p.m.
4:05 to 4:20 p.m.
4:20 to 4:35 p.m.
4:35 to 5:00 p.m.
Association Kinetic of Monoclonal Antibodies and Surfactants at the Liquid-Solid Interface Lefebvre Guillaume, Sanofi and G-INP, LMGP Process Induced Surface Energy Heterogeneity Changes in Lactose Powders Vikram Karde, Imperial College London The Metal Surface Impact on Stability for a Therapeutic Protein Adrian Defante, National Institute of Standards & Technology Control of Cell Culture Environment and Cell Attachment through Polyelectrolyte Multilayer Coatings Ivan Ding, University of Massachusetts
Peebles Awards Session
Savannah Junior Ballroom B, Main Lobby Session Chair: Eric Silverberg, Henkel Corporation
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
2:45 to 3:10 p.m.
3:10 to 3:35 p.m.
BREAK
3:35 to 4:00 p.m.
4:00 to 4:25 p.m.
4:25 to 4:50 p.m.
Deciphering the Adhesive Properties of Mussel-Inspired Metal-Coordinate Physical Gels Erica Lai, MIT Fracture Mechanics of a Self-Healing Hydrogel with Covalent and Physical Cross-Links Jingyi Guo, Cornell University The Effect of Flexible Joint-Like Elements on the Adhesive Performance of Nature Inspired Bent Mushroom-Like Fibers Elliot Geikowsky, Texas Tech University Instant Tough Bonding of Wet Tissues and Devices Hyunwoo Yuk, MIT
Hierarchically Patterned Adhesives for Reversible Adhesion on Rough and Smooth Adherent Nitish Singh, Indian Institute of Technology Kanpur Influence of Elastic Modulus of a Soft Elastomer on Adhesion to Rough Surfaces Siddhesh Narayan Dalvi, University of Akron High-Resolution Quantitative Detection of Damage in Soft Materials Juliette Slootman, ESPCI Paris
19 The Adhesion Society 2019
Natural Phenomena: Ice, Insects, Marine, and other Contaminants Savannah Junior Ballroom A, Main Lobby
Moderator & Session Chair: Hossein Sojoudi, University of Toledo
1:30 to 1:55 p.m.
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
2:45 to 3:10 p.m.
3:10 to 3:35 p.m.
BREAK
3:35 to 3:50 p.m.
3:50 to 4:05 p.m.
4:05 to 4:20 p.m.
Keynote
Stress-Localized Durable Icephobic Surfaces Hadi Ghasemi, University of Houston
Size-Independent Anti-Icing Surfaces Kevin Golovin, University of British Columbia
Self-Lubricating Icephobic Elastomer Coating (SLIC) for Ultralow Ice Adhesion with Enhanced Durability Yong Han Yeong, University of Virginia The Effect of Stainless Steel 304 Surface Roughness on Ice Adhesion Shear Strength of Accreted Impact Ice Joseph Smith, NASA Langley Research Center
Reinforcing Additives for Ice Adhesion Reduction Coatings Christopher Wohl, NASA Langley Research Center Self-Healing Coating for Anti-Icing Zhiliang Zhang, Norwegian University of Science and Technology (NTNU) Delaying Surface Icing Using Passive Anti-Icing Materials Rukmava Chatterjee, University of Illinois Chicago
5:30 to 7:00 p.m. 2019 Women’s Networking Reception Chair: Helen Minsky, ESPCI
Bayleys Terrace
8:00 to 11:00 p.m. Young Researcher Networking Event Chair: Emily Wilts & Xi Chen, Virginia Tech
Offsite: The Boardroom Restaurant
42nd Annual Meeting Final Program 20
7:00 – 8:00 a.m.
Registration
7:00 – 7:45 a.m.
Networking Breakfast
8:00 – 8:45 a.m.
lenary Talk III: Broad P Spectrum, Biodegradable Macromolecular Antimicrobials with High Selectivity for Applications Ranging from Systemic Use to Medical Device Coatings
Santee Ballroom Foyer, First Floor Santee Ballroom Salon D, First Floor
James Hedrick, IBM Research Almaden Session Chair: Al Crosby, University of Massachusetts-Amherst Santee Ballroom Salon EFGH, First Floor
8:45 – 9:00 a.m.
eebles & Alan Gent Awards P Presentations Santee Ballroom Salon EFGH, First Floor
Morning Technical Sessions 9:00 a.m. to Noon Structural Adhesives/Composites Santee Ballroom Salon A, First Floor
Session Chairs: Declan Carolan, FAC Technology & Ajay Krishnamurthy, National Institute of Standards & Technology
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:45 a.m.
BREAK
10:45 to 11:00 a.m.
11:00 to 11:15 a.m.
11:15 to 11:30 a.m.
Experimentally Quantifying Attraction and Characterizing Single Cantilever Beam “Debonding” for Adhesive-Backed Magnetic Strips Declan Carolan, Virginia Tech Investigation of Long-Term Behavior of Adhesive Bonds under Combined Hygro-Thermo-Mechanical Load Sascha Sander, Paderborn University Cohesive Zone Modelling for Transfer Printing of Thin Films Kenneth Liechti, University of Texas at Austin
Accelerated Degradation Method for Single-Lap Joints and Metal-Plastic Assemblies using Pressure Vessels with Heat and Moisture Masahiro Funabashi, National Institute of Advanced Industrial Science and Technology (AIST) Enhancements in Viscoelastic and Mechanical Properties of Hierarchical CNT Composites by Modifying Interface Chemistry Ajay Krishnamurthy, National Institute of Standards & Technology
E stimation of Static Strength of Lap Joints with An Acrylic Adhesive Based on Cohesive Zone Model Makoto Imanaka, Osaka University of Education
21 The Adhesion Society 2019
11:30 to 11:45 a.m. eso-Scale Mixed-Mode Viscoelastic Fracture M Alex Arzoumanidis, Psylotech, Inc.
Viscoelasticity and Rheology
Santee Ballroom Salon B, First Floor Moderators: Amy Peterson, Worcester Polytechnic Institute & Grace Wan, Dow Chemical Company Keynote
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:45 a.m.
BREAK
10:45 to 11:00 a.m.
11:00 to 11:15 a.m.
11:15 to 11:30 a.m.
11:30 to 11:45 a.m.
Viscoelasticity with Twist-Tie Knots in Liquid Crystalline Polymer Solutions Steve Lustig, Northeastern University Simplified Experimental Evaluation of Dynamic Mechanical Properties of Silicone Pressure Sensitive Adhesives with Multi-Layer Specimens Edoardo Nicoli, Dow Chemical Company Nonlinear Rheology of PSA with Microindentation and Adhesion Study of Out-life of Epoxy Resin Qifeng Wang, Northwestern University
Decoupling Adhesion and Cohesion in Soft Matter at Interfaces James Ferri, Virginia Commonwealth University Viscosity and Modulus Development of 2-Component Reactive Polyurethane Adhesives Grace Wan, Dow Chemical Company
F ingering Instabilities in PSAs under Shear Loading Helen Minsky, ESPCI A dvances in High Rate Testing of PSAs Michael Wald, 3M Company
Bioadhesive Chemistry
Santee Ballroom Salon C, First Floor Session Chairs: Ameya Narkar, Michigan Technological University & Szu-Ying (Sandy) Chen, University of California Santa Barbara
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:45 a.m.
BREAK
From Electrostatic Interactions to Underwater Adherence of Bio-Based Hydrogels Francisco Javier Cedano, ESPCI Flanking Lys Determines the Role of Dopa in Underwater Adhesion of Marine Mussel Mincheol Shin, POSTECH Evaluating Rapid Switching and Reversible Adhesion of Adhesive Hydrogel-Coated PDMS Micropillars Ameya Narkar, Michigan Technological University
42nd Annual Meeting Final Program 22
10:45 to 11:00 a.m.
11:00 to 11:15 a.m.
11:15 to 11:30 a.m.
11:30 to 11:45 a.m.
Photo-Switchable Adhesives for Easy-off Medical Tape Donghui Li, Case Western Reserve University
Surface Treatment of Pitch-Based Short Carbon Fibers Daniel Knorr, US Army Research Laboratory
T he Role of Chemical Surface Modification for Structural Adhesive Bonding Elisa Arikan, Universität der Bundeswehr Mßnchen and WIWeB uality of Interparticle Interactions and its Effect on Surface Energetics of Q Binary Mixtures Vikram Karde, Imperial College London
Novel Chemistry
Savannah Junior Ballroom B, Main Lobby Session Chair: Chris Wohl, NASA Langley Research Center
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:45 a.m.
BREAK
10:45 to 11:00 a.m.
11:00 to 11:15 a.m.
11:15 to 11:30 a.m.
Synthesis and Mechanical Properties of Anisotropic Double Network Elastomers Ludovic Feige, Laboratoire SIMM Polymer Colloidal Suspensions with Unexpected Thermo-Thickening Behavior Yaoyao Chen, Northwestern University Controlled Topology Toughening Epoxy via Incorporation of Partially Reacted Substructures Jian Gao, Drexel University
Anomalous Crystal Growth in an Epoxy-Ionic Liquid System Ruel McKenzie, University of Akron Reworkable Adhesive Composed of Tri-Anthracene Compound Haruhisa Akiyama, National Institute of Advanced Industrial Science & Technology
ontrolling Redox Reaction of Conductive Smart Catechol Adhesive using C Electrochemistry Saleh Bhuiyan, Michigan Technological University
11:30 to 11:45 a.m. F uran-Based Epoxy-Amine Thermoset Systems with Superior Characteristics for Adhesive Applications Xi Chu, Drexel University
23 The Adhesion Society 2019
Surface Preparation for Bonding
Savannah Junior Ballroom A, Main Lobby Session Chairs: Frank Palmieri, NASA-LARC & Rodolfo Ledesma, University of Virginia
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
Fracture Mechanical Investigations on Adhesive Joints Subjected to MixedMode I+III Loading Lukas Loh, TH Mittelhessen Cyanoacrylate Adhesive Update and Recent Advancement in CA Hybrid Structural Adhesives Shabbir Attarwala, Henkel Corporation Properties and Applications of Coater Ready Aqueous Pressure Sensitive Adhesives Raj Hariharan, Mapei Americas
42nd Annual Meeting Final Program 24
Join Your Peers in
Charleston, S.C.! The Adhesion Society rd
43
Annual Meeting
February 23-26, 2020
Adhesion Science & Technology
EXHIBITION
February 23-25, 2020 Adhesion Science & Technology
SHort Course
February 21-22, 2020
For more information visit www.adhesionsociety.org