2025 Honda MC tilbehør

Page 1


HONDA ACCESSORIES

ADVENTURE ACCESSORIES

ACCESSORIES CRF1100L AFRICA

TWIN

Africa Twin reaches new heights

In 2017, the Africa Twin broke the record for the highest altitude reached by a twincylinder motorcycle. After 5 days of acclimatisation, a team of 5 five riders piloted the Africa Twin onto the slopes of the world’s highest active volcano, the Nevado Ojos del Salado – located between Argentina and Chile. Reaching 5,965 metres above sea level, the international team completed its ascent within 24 hours with Africa Twin specially equipped with Termignoni exhaust, revised final sprockets, new Metzeler MC360TM tyres and a range of Honda genuine accessories, Their route took them – in temperatures as low as minus 5 degrees Celsius – through broken asphalt, gravel, mud, sand and finally stretches of ice pockets known as ‘penitentes’, underlining once again the Africa Twin’s credentials as the best-performing off-road motorcycle in its class.

Accessories Packs

Luggage

42L ALUMINIUM TOP BOX KIT

08ESY-MKS-LGALU

Made of strong and light aluminium, this 42L top box can store one full face helmet and much more. It comes equipped as standard with a backrest for the pillion. Fitted with the one-key Honda system, this top box can be operated using the Africa twin ignition key. It can be installed directly onto the Africa Twin thanks to the rear carrier fitted as standard and the included top box base.

Maximum load weight: 6 kgs

58L PLASTIC TOP BOX

08ESY-MLN-TB58

Top Box with a large capacity of 58L can store two full face helmets and much more, is designed with a new sticker made exclusively for the Africa Twin model. Its special lock allows to secure the lid without using the key.

Maximum load weight: 6 kgs

Dimensions (L x W x H in mm): 440 x 590 x 370

This kit includes:

• 58L Top Box with Stripe (08L70-MLN-E00ZA)

• Plastic Top Box Base (08L78-MKS-E00)

• Backrest for 58L Top Box (08L79-MKS-E00)

PLASTIC PANNIERS SET

08L71-MLN-E00ZA

Set of panniers specifically designed with a new sticker made exclusively for the Africa Twin model, with a stayless installation. This set of 2 panniers are suitable for adventure touring thanks to their highly durable shell. With a 30L capacity on the right side and 40L on the left side (enough storage for one full face helmet), they are equipped with the Honda 1-key system.

Maximum load capacity per pannier: 6 kg

38 L TOP BOX KIT

08ESY-MKS-LG35

38L Top Box suitable for one helmet. The Honda one key system allows to operate the top box by using the ignition key. Top box base, key system and backrest are included.

Maximum load capacity: 10 kg

ALUMINIUM PANNIERS

SET

08ESY-MKS-PNALU

Made of strong and light aluminium, this set includes 2 panniers presenting a capacity of 33L on the right side and 37L on the left.

An aluminium stay and two sets of 1-key Honda systems are included.

Maximum load weight for each pannier: 10 kgs

INNER BAGS FOR PLASTIC LUGGAGE

08L81-MKS-E00

Inner bag specifically designed to fit the 58L Plastic Top Box. As it is waterproof and equipped with straps, it can be also attached directly onto the motorcycle. Finally, a shoulder strap makes it easy to carry.

08L83-MKS-E00

Inner bag specifically designed to fit the right or the left plastic pannier. Same specifications as the plastic top box inner bag. Two units are required to complete the panniers set.

INNER BAGS FOR ALUMINIUM LUGGAGE

08L82-MKS-E00

Inner Bag specifically designed to fit the Aluminium Top Box. As it is waterproof and equipped with straps, it can be also attached directly onto the motorcycle. Finally, a shoulder strap makes it easy to carry.

08L84-MKS-E00

Set of 2 inner bags specifically designed to fit the right and the left aluminium panniers. Same specifications as the top box inner bags.

Luggage

INNER BAG FOR 38L TOP BOX

08L75-MJP-G51

Black nylon bag with embroidered silver Honda wing logo on the top and red zippers. Comes with adjustable shoulder belt and carrying handle.

4.5L TANK BAG

08L85-MKS-E00

Thanks to its transparent pocket, this waterproof Tank Bag is the perfect solution to store a smartphone and connect it to the USB port of the motorcycle (depending on smartphones specifications / connectors not included). A one-touch buckle and a magnet keep this Tank Bag firmly attached to the bike.

• Capacity: 4,5 Litres

• Maximum load weight: 1.5 kg

3L TANK BAG

08L89-MKS-E00

This light and compact Tank Bag features a transparent pocket and it's ideal to store small personal items.

Unnoticeable while steering the bike, this Tank Bag is firmly attached thanks to a one-touch buckle and a magnet. A rain cover is included.

Capacity: 3L

Maximum load weight: 1,5 kg

Protection

FRONT SIDE PIPE WITH ATTACHMENT

08ESY-MLN-FSP

The stainless piping of the Front Side Pipe has been finished with electrolytic polishing, making it resistant to corrosion and allowing dirt and debris to be easily cleaned. Fairings and other parts damage in case of fall is reduced, while further enhancing the tough, adventure image.

Applicable to L1 and L3 versions.

ENGINE GUARD WITH ATTACHMENT

08ESY-MKS-ENG

The Engine Guard improves the protection of the engine and the lower part of the bike. Made of stainless steel and finished with electrolytic polishing, it is resistant to corrosion and easy to clean. (Attachment included)

RADIATOR

GRILLS

08F71-MKS-E00

Made of stainless steel and showcasing the CRF logo, the Radiator Grills increase the African Twin tough image. Their original mesh pattern combines cooling capabilities with protection for the radiators against flying debris.

SIDE TANK PADS

08F74-MLN-E00ZA / 08R81-MKS-E00

These Side Tank Pads, which have been specially designed to fit the tank shape, help protecting the tank paint againsts rubing damage while improving the grip of the rider during both off-roading and sports touring.

Available in 2 options:

• 08R81-MKS-E00 - Black

• 08F74-MLN-E00ZA - Transparent

KNUCKLE GUARDS EXTENSION

08P72-MKS-E00ZB / 08P72-MKS-E00ZC / 08P72-MKS-E00ZD

These extensions can be fitted to the standard Knuckle Guards to improve the comfort by further diverting turbulent and cold air around the rider's hands.

Available in 3 colours:

• 08P72-MKS-E00ZB - White

• 08P72-MKS-E00ZC - Black

• 08P72-MKS-E00ZD - Red

Comfort

UPPER DEFLECTOR

08R70-MLN-E00

Wind and weather protection are enhanced by the upper deflector, which improves the ride comfort by reducing traveling air around the rider’s arms.

DEFLECTORS SET

08R72-MKS-E00

The deflectors improve comfort by reducing travelling air around the rider's waist and knees while funnelling the warm air emitted by the radiators.

MAIN STAND

08M70-MKS-E01

The Main Stand allows secure parking on a variety of ground surfaces and assists with maintenance operations.

FRONT LED FOG LIGHTS

08ESY-MLN-FL

Set of 2 additional front Led headlights that will increase the visibility for the riders and make them more noticeable for the surrounding traffic. The LED Fog Lights increase visibility during poor weather conditions with strong brightness despite low energy consumption (11W). Operated through the handlebar SW and displayed on the TFT display.

Can only be fitted with the Front Side Pipe (Not included).

This kit includes:

• Front Led Fog Lights Attachment (08V70-MLN-E00)

• Front Led Fog Lights (08V73-MKS-E00)

GRIP HEATERS WITH ATTACHMENT

08T72-MKS-E01

This set of heated grips provide 360° efficient heating for the rider's hands in cold weather. It features adjustable heat levels, smart heat allocation, and is integrated seamlessly with the bike's design.

• 5 level temperature adjustment

• Easy grip due to the same thickness as standard grips

• Built- in voltage monitoring system prevents the battery from draining

• Memory function

• Operated through the MC handle switch and displayed on the TFT display.

12V SOCKET

08U70-MKS-E00

Installed on the control panel, this 12V Socket is ideal to power or charge electrical equipment.

LOW SEATS

08R73-MKS-E00ZA / 08R73-MKS-E00ZB / 08R73-MKS-E00ZC

The low Seat offers a reduced seating position by 25mm (total seat heights adjustable in 2 positions of 795 or 815mm for L4 and 825 to 845 for L1 and L3).

Available in 3 colours:

• 08R73-MKS-E00ZA - Paulista Red

• 08R73-MKS-E00ZB - Grand Blue

• 08R73-MKS-E00ZC - Black

COMFORT SEATS

08R71-MLN-E00ZA / 08R71-MLN-E00ZB / 08R71MLN-E00ZC

Enhance your long distance travels with the Comfort Seat, which adds 15mm of comfort thickness and a bigger seating area (+8% than the standard). Seat height can be adjusted through 2 positions (835 to 855 mm in L4 and 865 to 885 mm in L1 and L3).

Available in 3 colours:

• 08R71-MLN-E00ZA - Paulista Red

• 08R71-MLN-E00ZB - Grand Blue

• 08R71-MLN-E00ZA - Black

PILLION COMFORT STEPS

08R71-MJP-G50

Optional pillion footpegs made of aluminium with a thicker rubber pad, wider than the standard pegs for increased comfort and reduced vibrations.

Performance & Design

RALLY STEPS SET

08R79-MKS-E00

With their aggressive spike shape and a surface 57% larger than the standard ones, these Rally Steps improve the stability and control during off-road riding while reduce risk of boot slip.

DCT PEDAL SHIFT

08U70-MKS-E50

This kit enables the rider to change gear in the traditional 1 down – 5 up format by using the left foot. It works alongside the handlebar shift triggers giving the rider the choice of using either of them at any moment. (For DCT Version only)

QUICK SHIFTER

08U70-MLG-E00

The quick shifter enables smooth and instant up and down gear shifting without any clutch operation, thereby reducing the rider burden for long-distance adventure touring and added sportiness. With AUTOBLIP function for seamless down-shifts. (For Manual Transmission version only).

WHEEL STRIPES SET

08F72-MLN-E40ZA / 08F75-MLN-E00ZA

The wheel stripes enhance the design while add extra protection to the the wheels, while matching perfectly with the livery of the Africa Twin. Each set includes 2 pieces per each wheel side. Available colours:

• 08F72-MLN-E40ZA - Tricolour

• 08F75-MLN-E00ZA - Black & Red

CUSTOMIZED PART

SC-PROJECT ADVENTURE-R MUFFLER

0R24M-REX-014

The Africa Twin SC-Project ADVENTURE-R slip-on muffler offers a step up in the riding experience and performance, improving the exhaust sound and highlighting the sporty side of the bike.

• Weight Savings: -1,8 kgs than standard

• Power Gain: +2,2 hp @4500 rpm

• Torque Gain: +3,9 Nm @4500 rpm

• EURO5+ compliant and approved for road use.

Note: Only applicable to 24YM Africa Twin

ACCESSORIES CRF1100L AFRICA TWIN

ADVENTURE SPORTS

Honda NXR 750 Paris-Dakar

The NXR750 dominated the Paris-Dakar Rally from 1986 to 1989, winning the trophy 4 years in a row. Back then, the 22 day race started in Paris and ended in Dakar/Senegal crossing nearly 15.000km of African desert. Gilles Lalay won the 1989 Paris-Dakar Rally on this motorcycle with its distinct Rothmans design.

Accessories Packs

Luggage

42L ALUMINIUM TOP BOX KIT

08ESY-MKS-LGALU

Made of strong and light aluminium, this 42L top box can store one full face helmet and much more. It comes equipped as standard with a backrest for the pillion. Fitted with the one-key Honda system, this top box can be operated using the Africa twin ignition key. It can be installed directly onto the Africa Twin thanks to the rear carrier fitted as standard and the included top box base.

Maximum load weight: 6 kgs

58L PLASTIC TOP BOX

08ESY-MLN-TB58

Top Box with a large capacity of 58L can store two full face helmets and much more, is designed with a new sticker made exclusively for the Africa Twin model. Its special lock allows to secure the lid without using the key.

Maximum load weight: 6 kgs

Dimensions (L x W x H in mm): 440 x 590 x 370

This kit includes:

• 58L Top Box with Stripe (08L70-MLN-E00ZA)

• Plastic Top Box Base (08L78-MKS-E00)

• Backrest for 58L Top Box (08L79-MKS-E00)

PLASTIC PANNIERS SET

08L71-MLN-E00ZA

Set of panniers specifically designed with a new sticker made exclusively for the Africa Twin model, with a stayless installation. This set of 2 panniers are suitable for adventure touring thanks to their highly durable shell. With a 30L capacity on the right side and 40L on the left side (enough storage for one full face helmet), they are equipped with the Honda 1-key system.

Maximum load capacity per pannier: 6 kg

EASY 38L TOP BOX PACK

08ESY-MKS-LG35

38L Top Box suitable for one helmet. The Honda one key system allows to operate the top box by using the ignition key. Top box base, key system and backrest are included.

Maximum load capacity: 10 kg

ALUMINIUM PANNIERS SET

08ESY-MKS-PNALU

Made of strong and light aluminium, this set includes 2 panniers presenting a capacity of 33L on the right side and 37L on the left.

An aluminium stay and two sets of 1-key Honda systems are included.

Maximum load weight for each pannier: 10 kgs

INNER BAGS FOR PLASTIC LUGGAGE

08L81-MKS-E00

Inner bag specifically designed to fit the 58L Plastic Top Box. As it is waterproof and equipped with straps, it can be also attached directly onto the motorcycle. Finally, a shoulder strap makes it easy to carry.

08L83-MKS-E00

Inner bag specifically designed to fit the right or the left plastic pannier. Same specifications as the plastic top box inner bag. Two units are required to complete the panniers set.

INNER BAGS FOR ALUMINIUM LUGGAGE

08L82-MKS-E00

Inner Bag specifically designed to fit the Aluminium Top Box. As it is waterproof and equipped with straps, it can be also attached directly onto the motorcycle. Finally, a shoulder strap makes it easy to carry.

08L84-MKS-E00

Set of 2 inner bags specifically designed to fit the right and the left aluminium panniers. Same specifications as the top box inner bags.

Luggage

INNER BAG FOR 38L TOP BOX

08L75-MJP-G51

Black nylon bag with embroidered silver Honda wing logo on the top and red zippers. Comes with adjustable shoulder belt and carrying handle.

4.5L TANK BAG

08L85-MKS-E00

Thanks to its transparent pocket, this waterproof Tank Bag is the perfect solution to store a smartphone and connect it to the USB port of the motorcycle (depending on smartphones specifications / connectors not included). A onetouch buckle and a magnet keep this Tank Bag firmly attached to the bike.

• Capacity: 4,5 Litres

• Maximum load weight: 1.5 kg

3L TANK BAG

08L89-MKS-E00

This light and compact Tank Bag features a transparent pocket and it's ideal to store small personal items. Unnoticeable while steering the bike, this Tank Bag is firmly attached thanks to a one-touch buckle and a magnet. A rain cover is included.

Capacity: 3L Maximum load weight: 1,5 kg

Comfort Design

FRONT LED FOG LIGHTS

08ESY-MLN-FL

The stainless piping of the Front Side Pipe has been finished with electrolytic polishing, making it resistant to corrosion and allowing dirt and debris to be easily cleaned. Fairings and other parts damage in case of fall is reduced, while further enhancing the tough, adventure image.

Applicable to Adventure Sports.

This kit includes:

• Front Side Pipe (08P70-MLN-EQ0)

• Engine Guard Attachment (08P75-MKS-E00)

LOW SEATS

08R73-MKS-E00ZA / 08R73-MKS-E00ZB / 08R73-MKS-E00ZC

The low Seat offers a reduced seating position by 25mm (total seat heights adjustable in 2 positions of 795 or 815mm for L4 and 825 to 845 for L1 and L3). Available in 3 colours:

• 08R73-MKS-E00ZA - Paulista Red

• 08R73-MKS-E00ZB - Grand Blue

• 08R73-MKS-E00ZC - Black

COMFORT PILLION STEPS

08R71-MJP-G50

Optional pillion footpegs made of aluminium with a thicker rubber pad, wider than the standard pegs for increased comfort and reduced vibrations.

MAIN STAND

08M70-MLN-EQ0

The Main Stand allows secure parking on a variety of ground surfaces and assists with maintenance operations. Specific to Africa Twin Adventure Sports.

WHEEL STRIPES SET

08F70-MLN-EQ0ZA / 08F70-MLN-ES0ZA

The wheel stripes enhance the design while add extra protection to the the wheels, while matching perfectly with the livery of the Africa Twin. Each set includes 2 pieces per each wheel side.

Available colours:

• 08F70-MLN-EQ0ZA - Black & Gold

• 08F70-MLN-ES0ZA - Tricolour

Performance & Design

RALLY STEPS SET

08R79-MKS-E00

With their aggressive spike shape and a surface 57% larger than the standard ones, these Rally Steps improve the stability and control during off-road riding while reduce risk of boot slip.

DCT PEDAL SHIFT

08U70-MKS-E50

This kit enables the rider to change gear in the traditional 1 down – 5 up format by using the left foot. It works alongside the handlebar shift triggers giving the rider the choice of using either of them at any moment. (For DCT Version only)

QUICK SHIFTER

08U70-MLG-E00

CUSTOMIZED PART

The quick shifter enables smooth and instant up and down gear shifting without any clutch operation, thereby reducing the rider burden for long-distance adventure touring and added sportiness. With AUTOBLIP function for seamless down-shifts. (For Manual Transmission version only). SC-PROJECT ADVENTURE-R MUFFLER

0R24M-REX-014

The Africa Twin SC-Project ADVENTURE-R slipon muffler offers a step up in the riding experience and performance, improving the exhaust sound and highlighting the sporty side of the bike.

• Weight Savings: -1,8 kgs than standard

• Power Gain: +2,2 hp @4500 rpm

• Torque Gain: +3,9 Nm @4500 rpm

• EURO5+ compliant and approved for road use.

Note: Only applicable to 24YM Africa Twin Adventure Sports

Protection

FRONT SIDE PIPE WITH ATTACHMENT

08ESY-MLN-FSPAS

The stainless piping of the Front Side Pipe has been finished with electrolytic polishing, making it resistant to corrosion and allowing dirt and debris to be easily cleaned. Fairings and other parts damage in case of fall is reduced, while further enhancing the tough, adventure image.

Applicable to Adventure Sports.

This kit includes:

• Front Side Pipe (08P70-MLN-EQ0)

• Engine Guard Attachment (08P75-MKS-E00)

ENGINE GUARD WITH ATTACHMENT

08ESY-MKS-ENG

The Engine Guard improves the protection of the engine and the lower part of the bike. Made of stainless steel and finished with electrolytic polishing, it is resistant to corrosion and easy to clean. (attachment included)

SIDE TANK PADS

08F71-MLN-EQ0ZA / 08R75-MKS-E20

These Side Tank Pads, which have been specially designed to fit the tank shape, help protecting the tank paint againsts rubing damage while improving the grip of the rider during both off-roading and sports touring.

Available in 2 options:

• 08R75-MKS-E20 - Black

• 08F71-MLN-EQ0ZA - Transparent

RADIATOR GRILLS

08F71-MKS-E00

Made of stainless steel and showcasing the CRF logo, the Radiator Grills increase the African Twin tough image. Their original mesh pattern combines cooling capabilities with protection for the radiators against flying debris.

ACCESSORIES XL750 TRANSALP

The original Transalp

The original Transalp, introduced in 1986 with a 583cc V-Twin engine, is something of a legend. And as testament to the sheer quality of its build and timelessness of its design, many can still be seen on Europe’s roads today.

This is just what the new XL750 Transalp is built to do, and a legend of adventure touring is thus reborn.

Accessories Packs

Tank Side Sticker *PB-308P*

Tank Side Sticker *NHC52M*

Tank Side Sticker *NH1*

Side Bag Att

Can't decide? Combine them and make your own! All packs are compatible and combinable.

Protection

ENGINE GUARD

08P73-MLC-D00

The Engine Guard protects the engine frame in case of fall or collision, while providing an enhanced adventure appearance to the motorcycle. Made of steel and finished in Mat Beta Silver Metallic colour. This accessory is required to fit the Skid Plate onto the motorcycle.

• Material: Steel

• Surface treatment: General Coating

• Color: Mat Beta Silver Metallic

To install the engine guard, the Guard ATT (Sold separately 08P74-MLC-D00) is required.

KNUCKLE GUARD & EXTENSION

08ESY-MLC-KNGZB / 08ESY-MLC-KNGZC

The Knuckle Guards improve the ride comfort by protecting the rider's hands against adverse weather and wind. (Extension included)

Available in the following colours:

• 08ESY-MLC-KNGZB White Knuckle Guards

• 08ESY-MLC-KNGZC Black Knuckle Guards

FRONT SIDE PIPE

08P72-MLC-D00

These steel side pipes reduce damage to the motorcycle fairings and other parts in case of fall, while providing an enhanced adventure look.

• Material: Steel

• Surface treatment: Painted

• Color: Silver

The Guard Attachment (08P74-MLC-D00) is required to install it.

SKID PLATE

08P71-MLC-D00

The skid plate consists of a 2.5 mm thick aluminum plate with excellent strength and corrosion resistance. It is designed to protect the motorcycle parts located around and below the engine like the oil filter or the exhaust pipes, and shaped to fit perfectly with the engine guard for a more compact and resistant appearance.

To install the Skid Plate, Engine Guard (08P73MLC-D00) and Engine Guard ATT (08P74-MLC-D00) are required.

Performance

TANK SIDE STICKER

08P71-MLC-D30ZA / 08P71-MLC-D30ZB / 08P71-MLC-D30ZC

These tank side stickers, feature the TRANSALP logo. Matching the motorcycle colour: *NHB01* Graphite Black.

The special surface treatment makes them resistant to scratches and stone chips when driving on rough roads or off-roading, while their flexible sheet makes them easy to install on the tank surface.

• 08P71-MLC-D30ZA TANK SIDE STICKER *PB-308P*

• 08P71-MLC-D30ZB TANK SIDE STICKER *NH1*

• 08P71-MLC-D30ZC TANK SIDE STICKER *NHC52M*

RADIATOR GRILL

08F74-MLC-D00

The Radiator Grill, featuring the TRANSALP logo and made from stainless steel, has an original mesh pattern combining cooling capability with protective function. This reduces potential damage to the radiator core from debris.

RALLY STEPS

08R79-MKS-E00

With their aggressive spike shape and a surface 57% larger than the standard ones, these Rally Steps improve the stability and control during off-road riding while reduce risk of boot slip.

QUICK SHIFTER

08U70-MLC-D00

The Quick-shifter allows up and down clutchless gear changes, with auto blipper function for smooth and instant shifting which enables stress-free riding not only for sports driving but also for touring. Features adjustable operation load in three stages.

50L TOP BOX

08ESY-MLC-TB50

With a large capacity of 50L, this plastic top box can store two helmets in. The Honda one key system allows to operate the top box by using the ignition key.

This kit includes:

• 50L Manual Top Box

• Top Box Pad (Cushion) BLACK

• Key system inner cylinder

• 50L Top Box Base

• 25L Top Box Inner Bag

• Aluminium Panel Top Box

PANNIER SET

08ESY-MLC-PNAL

Set of 2 panniers with a 26L capacity on the right side, and 33L on the left. The "Honda one key system" allows to open and close the panniers by using the key of the motorcycle. Maximum load capacity (both sides): 6 kg

This kit includes:

• Pannier Case (R26,L33)

• Pannier Inner Bags

• Panel R/L Pannier

• Key System Inner Cylinder x2

• Pannier Support Stay

• 2x Key System Inner Cylinder

TANK BAG

08L89-MKS-E00

This light and compact Tank Bag features a transparent pocket and it's ideal to store small personal items. Unnoticeable while steering the bike, this Tank Bag is firmly attached thanks to a one-touch buckle and a magnet. A rain cover is included.

Capacity: 3L

Maximum load weight: 1,5 kg

Design & maintenance

TOP BOX CUSHION

08R74-MLF-E00ZA / 08R74-MLF-E00ZB

Designed to match the 50L Top Box, this backrest is made to enhance the passenger comfort and reduce the fatigue in long rides and journeys. Recommended application with COMFORT accessory seat.

• 08R74-MLF-E00ZA *Black*

• 08R74-MLF-E00ZB *Red*

25L INNER BAG FOR TOP BOX

08L77-MKT-D00

The Top Box inner bag provides a 25L capacity storage and is easy to carry thanks to its shoulder strap. Featuring Honda Logo.

TOP BOX INNER BAG

08L81-MKS-E00

Made of a robust fabric, this waterproof inner bag comes with 2 shoulder belts and a carrying handle. Presenting a reflective signage and a Honda Logo, this large inner bag can be loaded directly onto your bike.

• Fabric: Tarpaulin 250D PVC

• Colour: Black

• Dimensions (L x W x H in mm): 310mm x 480mm x 200mm TOP BAG KIT

08ESY-MLC-TBS

This bag designed for XL750 Transalp offerz practical storage for long-distance riding, touring, or daily commutes.

Easly detachable thanks to its quick lock system.

• Designed 100% with waterproof material

• Capacity: 20-26L

• Color: black with red contrasting stitching

• Shoulder strap for easy carrying when removed from the bike.

This pack contains:

• Left Side bag (08L70-MLC-D31)

• Top Bog Att (08L71-MLC-D31)

SIDE BAG

08L70-MLC-D31 / 08L73-MLC-D31

Side bags for a Transalp motorcycle offer practical storage solutions for long-distance riding, touring, or daily commutes.

Easly detachable thanks to its quick lock system.

• Designed 100% with waterproof material

• Capacity: 20-26L

• Color: black with red contrasting stitching

• Shoulder strap for easy carrying when removed from the bike.

• 08L70-MLC-D31 LEFT SIDE BAG

• 08L73-MLC-D31 RIGHT SIDE BAG

Note: Side bag attachment 08L72-MLC-D31) is need it but not included

WHEEL STRIPES

08F71-MLC-D30ZA / 08F71-MLC-D30ZB

The wheel stripes enhance the design while add extra protection to the the wheels, while matching perfectly with the livery of the Transalp.

Note: Each set includes 2 pieces per each wheel side.

• 08F71-MLC-D30ZA WHEEL STRIPE *NH463M*

• 08F71-MLC-D30ZB WHEEL STRIPE *NHB53P*

MAIN STAND

08M70-MLC-D01

The Main Stand allows secure parking on a variety of ground surfaces and assists with maintenance operations or long-term storage.

GRIP HEATER KIT

08ESY-MLC-GHS

Extremely slim heated grips focusing on the area of the hands most sensitive to cold with a 5-level integrated controller for maximum rider comfort. Operated with the handlebar switch, the TFT monitor displays the temperature adjustment level. An integrated circuit protects the battery from draining. The last level selected is memorized when the ignition is switched off.

FRONT FOG LIGHTS KIT

08ESY-MLC-FFS

Set of 2 additional front led lights that increase the riders' visibility during adverse weather conditions while they make them more noticeable for the surrounding traffic. This kit includes:

• Front Fog Light (08V80-K3R-D00)

• Front Fog Light Attachment (08V70-MLC-D30)

To install the Fog Lights, the Front Side Pipe 08P72MLC-D00 is required but not included.

COMFORTABLE PILLION STEPS

08R71-MJP-G50

Deluxe pillion footpegs made of aluminium and rubber that are wider than the standard pegs for increased comfort.

COMFORT SEAT *BLACK*

08R70-MLC-D30ZA

Thanks to its softer construction, this seat provides an extra level of comfort enhancing the riding experience. Cushion thickness is increased by 20mm compared to the standard seat.

FAIRING DEFLECTOR

08R72-MLC-D00

Wind and weather protection are enhanced by the fairing deflector, which improves the ride comfort by reducing traveling air around the rider’s arms.

• Material: Coated Polycarbonate

• Finishing: Dark Smoke

WINDSHIELD DEFLECTOR

08R72-MLC-D30

Wind and weather protection are enhanced by this deflector, which are attached to the wind screen and improve the ride comfort by reducing traveling air around the rider’s chest and shoulders.

• Material: Coated Polycarbonate

• Finishing: Dark Smoke

Security

12V SOCKET KIT

08U71-MKK-D00

Power or charge electrical equipment using this convenient 12V Socket (Provides 2A).

HIGH SCREEN

08R71-MLC-D30

The high screen has been redesigned to match the new headlights, adds ducts and optimizes curvature in line with the design changes around the front. It contributes to excellent comfort at high speeds, by reducing head shaking and wind noise on highways.

• The coated is scratch-resistant.

• Material: Hard-Coated Polycarbonate

• Color: Clear

• Featured with Honda logo

• Extended by 75mm

LOW SEAT *BLACK*

08R74-MLC-D00ZB

The Low Seat, which is 20 mm lower than the standard seat, improves ground reach. Same colour and design as the standard seat.

• Material: PP PVC leather / urethane foam / PP bottom

• Color: Black

ALARM KIT

08ESY-MLC-ALS

This Alarm system is specially designed for the motorcycle's protection, offering a higher level of antitheft security.

ACCESSORIES X-ADV

Tougher than the rest!

During the 2019 Gibraltar Race, a 7,000-km all-terrain rally from Baltic Sea to Atlantic Ocean, Renato Zocchi steered an X-ADV to the Class 2 victory. The rider put also himself as seventh overall in the event, beating out the competition of purpose-built dirt bikes and adventure tourers. While his X-ADV was specially prepared with extra wheel travel and ground clearance, Zocchi kept the footboards and drove its DCT version on Gravel mode.

Another proof that no matter where you want to go, the X-ADV is tougher than the rest to get you there!

Accessories Packs

Front Fog Lights Attachment

Front Fog Lights

Pannier Case(R26,L33)

Pannier Support Stay

Pannier Inner Bag

Panel R/L Pannier(AL)

Key System Inner Cylinder (Wave Key)

Parking Lever Cover

Parking Lever

Lateral Cover

Floor Panel

Aluminium Handelbar Holder

50L Smart Top Box

Luggage Divider

Aluminium Rear Carrier Omega Silver Metallic

Top Box Smart Opener

Top Box Inner Bag (25L)

Panel Top Box (AL)

Top Box Pad Black Cushion Black

Top Box Pad Black Cushion Red

Hand Grip Cement

Console Bag

Leg Deflector

Comfort Seat *Black*

Heater

Top Box Backrest

Security Buzzer

Alarm System

Alarm Attachment

38l Top Box

Top Box Lock

50L Manual Top Box

Inner Bag For 38L Top Box

Top Box Inner Bag

50L Top Box Rubber Pad

Key System Body Part

Knuckle Guard Extension White

Acc Socket

Can't decide?

50L SMART TOPBOX

08ESY-MKT-STB50

50L Top Box with SMART Opener system allowing to open the lid without taking the key out of the pocket.

Can hold two helmets. The built-in key cylinder can be used to lock the top box even when it is removed from the carrier. A backrest is included to improve passenger comfort. Rear carrier and Aluminium Panel included. Maximum load capacity: 6 kg

38L TOP BOX WITH KEY SYSTEM

08ESY-MKT-TB35OK

38L Top Box suitable for one helmet. The Honda one key system included allows to operate the top box by using the ignition key. Maximum load capacity: 6 kg. Top Box Lock & Key System Inner Cylinder included. Rear Carrier, Backrest & Inner Bag not included.

TOP BOX BACKREST

08F00-MJP-G50

Designed to match the 38L Top Box, this backrest is made of polyurethane foam to improve the passenger comfort. Easy fitment with no drilling required. Note: Top Box 38L is not included.

TOP BOX PAD CUSHION

08R74-MLF-E00ZA / 08R74-MLF-E00ZB

Designed to match the 50L Top Box, this backrest is made to enhance the passenger comfort and reduce the fatigue in long rides and journeys.

Black coloured recommended application with standard seat. Red coloured recommended application with COMFORT accessory seat.

08R74-MLF-E00ZA- Black

08R74-MLF-E00ZB- Red

25L INNER BAG FOR TOP BOX

08L77-MKT-D00

Top Box inner bag providing a 25L storage capacity and easy to carry thanks to its shoulder strap. Featuring Honda Logo.

PANNIERS INNER BAGS

SET

08L78-MKT-D00

Set of 2 inner bags matching the shape of the panniers new design. Available in black with a discrete Honda signature, these inner bags come with a shoulder strap for easy carry.

PANNIERS SET WITH STAY

08ESY-MKT-PNS

Set of 2 panniers with a 26L capacity on the right side, and 33L on the left. The "Honda key system" provided allows to open and close the panniers by using the key of the scooter.

Rear carrier and Aluminium Panels sold separately. Maximum load capacity (each side): 6 kg

ALUMINIUM PANELS FOR PANNIERS

08L80-MKT-D00

Set of 2 Aluminium Panels to complement the design of the panniers by adding an extra touch of adventure.

ALIMINIUM PANEL FOR TOP BOX

08L83-MKT-D00

Aluminium panel for the 50L Top Box that enhances the tough appearance of the motorcycle and complements the box design (Top Box not included).

ALUMINIUM CARRIER

08L74-MKT-D00ZC

Aluminium Rear Carrier required for the installation of all available Top Boxes. It's design features handle grips for added passenger comfort.

LUGGAGE DIVIDER

08L71-MKT-D70

The lugagge divider has been designed to enhance practicality during daily commuting or while travelling, thanks to its modular compartments and perfect fitment under the seat.

• Material: Polyester PVC

• Color: Black with red zippers.

• Easy to carry thanks to the carrying handle

• Includes the Honda logo

Protection & Performance

FRONT SIDE PIPES

08P70-MKH-D00

Set of silver Side Pipes that protect the scooter’s body and provide a mount for the Front Fog Lights (sold separately).

RIDER STEPS SET

08R72-MKT-D00

Improve your control while riding off-road and give your X-ADV the ultimate Adventure look with this Aluminium Rider Steps Set.

KNUCKLE GUARD EXTENSIONS

08P72-MKS-E00ZB / 08P72-MKS-E00ZC

These extensions can be fitted to the standard Knuckle Guards to improve the comfort by further diverting turbulent and cold air around the rider's hands.

• 08P72-MKS-E00ZB (White)

• 08P72-MKS-E00ZC (Black)

CONSOLE BAG

08L79-MKT-D00

Perfectly fitting the space between the rider's knees, this Black 9L Console Bag is ideal for carrying your everyday essentials. Convenient slot available on the front for smartphone wires. Rain cover included. Maximum load capacity: 2 kg

MUFFLER AKRAPOVIC

0R24M-SMU-027

Expertly designed and constructed using race-proven materials, the Slip-on Line (Titanium) exhaust for the X-ADV 750 offers a high-grade titanium muffler outer sleeve over a stainless-steel muffler inner structure and a stainless-steel link pipe. It is finished with a handmade carbon-fibre end cap and heatshield for an impressively sporty look, perfectly in keeping with the lines of this machine.

Note: Only applicable to 25YM

FRONT FOG LIGHTS WITH ATTACHMENTS

08ESY-MKT-FLS

These 2 additional LED headlights will increase your visibility and make you more noticeable to the surrounding traffic.

Operated with the left handlebar switch, a signal appears on the TFT monitor when the lights are switched on.

Must be mounted onto the Front Side Pipes (sold separately).

LEG DEFLECTORS SET

08R70-MKT-D70

Featuring the X-ADV logo, the deflectors set enhances comfort by reducing airflow around your waist and thighs.

COMFORT SEAT *BLACK*

08R71-MKT-D70ZA

Thanks to its softer construction and its increased 10mm thickness, this rider seat provides an extra level of comfort, enhancing the riding experience.

• Material: PVC leather / soft urethane / PP bottom

• Red contrasting double-stitching

• Lumbar support is increased for the rider

• Features the Honda logo

• Two-tone leather finish

Design & Security

PARKING LEVER

08F70-MKT-D00

With the same black anodized treatment as the cover, this Aluminium Parking Lever adds a design and sophistication touch to the cockpit of the motorcycle.

PARKING LEVER COVER

08F72-MKT-D00

With its black anodized treatment and the inclusion of the Honda logo, this Aluminum Parking Lever Cover elevates your bike's aesthetics, adding an exclusive and stylish touch to its design.

ALUMINIUM HANDLEBAR HOLDER

08F71-MKT-D00

Aluminium Handlebar holder featuring the X-ADV logo that reinforces the premium feel of your X-ADV. Made from Aluminium and finished in black anodized.

HEATED GRIPS

08T70-MKT-D70

With 5 heat levels adjustable through the handlebar switch and displayed on the TFT screen, the extremely slim heated grips warm up the rider’s hands for maximum comfort. The heat level is memorized when the ignition is switched off and an integrated circuit prevents the battery from draining. Electricity consumption: 32W.

PART

PASSENGER BACK REST

0R24M-MSE-009

This high quality backrest helps to improves the comfort of the passenger without losing the sporty image of the the model. It is mounted with its own bracket that will accentuate the tough design of the XADV. Not compatible with top box and rear carrier.

ACC SOCKET

08U70-MKT-D70

This practical 12V Socket allows to charge electronic devices (Provides 2A).

LATERAL COVERS SET

08F75-MKT-D00

Stainless steel covers that protect body parts from being damaged or scratched while adding an extra touch of premium appearance to the X-ADV.

FLOOR PANELS

08F70-MKH-D00

Made of stainless steel with anti-slip pads and featuring the X-ADV logo, this floor panels will add a classy touch to your X-ADV.

ALARM KIT

08ESY-MKT-ALS

This Alarm system is specially designed for the motorcycle's protection, offering a higher level of antitheft security.

CUSTOMIZED

ACCESSORIES NC750X

Do you really need a left lever to enjoy riding?

The Dual Clutch Transmission made its worldwide debuts for motorbikes in 2010 with the Honda VFR 1200. Now entering its 3rd generation and downsized to suit middisplacement bikes, the DCT is completely different from the belt-type transmissions used by most scooters: it is structurally a conventional 6-speed gear ratio transmission, yet electronically controlled when changing speeds. Keep the fun of a manual transmission; enjoy the comfort of an automatic one!

Accessories Packs

FR Side Pipe

Knuckle Guard

FR Fog Light Att

Front Fog Lights

Hand Grip Cement

Comfort Pillion Seat *Black*

Comfort Main Seat *Black*

Adjustable Windscreen

Grip Heater

Foot Deflector Set (MT )

Foot Deflector Set (DCT

Key System Inner Cylinder (Wave Key)

Pannier Support Stay

Pannier Case (R36,L37)

Pannier Inner Bag

Panel R/L Pannier(AL)

Rear Carrier (Resin) Silver

Luggage Divider

50l Manual Top Box

Top Box Inner Bag (25L)

Panel Top Box (AL)

Key System Body Part

Main Stand

Top Box Pad Black Cushion Red

Top Box Pad Black Cushion Black

Usb Charger

R/C Alarm Att

Alarm System

Security Buzzer

Top Box Backrest

38L Top Box

Top Box Lock

Pannier Case (R32,L33)

Inner Bag For 38L Top Box

Top Box Inner Bag

50L Top Box Rubber Pad

50L MANUAL TOP BOX

08L73-MKT-D00

50L Top Box that can hold two helmets in. The builtin key cylinder can be used to lock the top box even when is removed from the carrier. Must be mounted with a rear carrier and the Top Box Rubber Pad (sold separately)

• Dimensions: L 470 mm x W 600 mm x H 340 mm

• Maximum load capacity: 6 kg

• Colour: Black

Note: Rear carrier, Top box rubber pad, Key system inner cylinder (Wave Key) are not included.

PANNIER SET & STAY KIT

08ESY-MKW-PNS

The pannier cases are designed to be both practical and durable, providing ample storage for long trips or daily commutes. A new buckle stopper band secures the luggage when the lid is opened and ensures the correct closing operation. Rear carrier required sold separately. Capacity for a full-face helmet.

• Capacity: 36L Right, 37L Left

• Dimensions: 430x460x285 (mm)

• Material: Glass-fiber reinforced PP resin

• Colour: Black

• Allowable load weight: 6.0 kg x R/L

ALUMINIUM TOP BOX PANEL

08L83-MKT-D00

Aluminium panel for the 50L Top Box that enhances the toughness appearance of the motorcycle and complements the box design (Top Box not included).

PANEL R/L PANNIER(AL)

08L80-MKT-D00

Set of 2 Aluminium Panels to complement the design of the panniers by adding an extra touch of adventure.

• Material: Aluminium

• Featuring Honda logos

• Left and right set

REAR CARRIER *NHC08M*

08L70-MKW-D00ZB

The Rear Carrier is needed to fit all the Honda Genuine Luggage specifically designed for NC750X. 2 handles have been integrated to improve the passenger comfort and ease the handling of the bike.

Maximum load capacity: 10 kg

38L TOP BOX WITH KEY SYSTEM

08ESY-MKT-TB35OK

38L Top Box suitable for one helmet. The Honda one key system included allows to operate the top box by using the ignition key. Rear Carrier required. Rear carrier not included. Maximum load capacity: 6 kg Note: Rear Carrier is not included.

38L TOP BOX BACKREST

08F00-MJP-G50

Designed to match the 38L Top Box, this backrest is made of polyurethane foam to improve the passenger comfort. Easy fitment with no drilling required. Note: Top Box 38L is not included.

INNER BAG FOR 38L TOP BOX

08L75-MJP-G51

This Top Box inner bag has been designed to enhance rider comfort. It features an adjustable shoulder belt for easy carrying and is adorned with an embroidered silver Honda wing logo on the top, complemented by red zippers.

• Material: Polyester PVC

• Color: Black

• Expandable from 15 to 25L

08L72-MKW-D70

Practical accessory designed to help riders organize the storage space. This divider ensures that your belongings are neatly separated, preventing items from shifting during rides and making it easier to access what you need quickly.

• Featuring an orange interior lining with mesh pockets

• Interior Velcro modular dividers configurable according to the driver's needs

• Material: Polyester (OUT) / Knitted (IN)

• Colour: Black (OUT) / Orange (IN)

• 380x250x165 (mm)

• Capacity: 3L

TOP BOX INNER BAG (25L)

08L77-MKT-D00

Top Box inner bag providing a 25L storage capacity and easy to carry thanks to its shoulder strap. Featuring Honda Logo.

• Material: Polyester PVC

• Colour: Black

PANNIERS INNER BAGS SET

08L78-MKT-D00

Set of 2 inner bags matching the shape of the pannier's new design. Available in black with a discrete Honda signature, these inner bags come with a shoulder strap for easy carry.

TOP BOX PAD CUSHION

08R74-MLF-E00ZA / 08R74-MLF-E00ZB

Designed to match the 50L Top Box, this backrest is made to enhance the passenger comfort and reduce the fatigue in long rides and journeys.

• 08R74-MLF-E00ZA - Black stitched; recommended application with standard seat.

• 08R74-MLF-E00ZB - Red stitched; recommended application with Comfort accessory seats.

50L TOP BOX RUBBER PAD

08L85-MKT-D00

Designed to match the 50L Top Box, this backrest is made for passenger comfort. Easy fitment with no drilling required. Top Box sold separately.

Comfort & Security

ADJUSTABLE WINDSCREEN

08R74-MKW-D70

Functional and versatile accessory designed to enhance rider comfort by reducing wind and improving aerodynamics. It allows riders to customize their wind protection based on riding conditions, personal preference, and height.

• 24,6 mm wider and 72 mm higher than standard screen

• 60,5 mm of height adjustment range in 5 different positions

• Adjustment of the windscreen is manual and requires the use of both hands, therefore the motorbike must be stationary

FOOT DEFLECTOR SET (DCT)

08R70-MKW-D10

This set of deflector improves comfort by reducing the air pressure felt by the rider and limit water projections.

FOOT DEFLECTOR SET (MT)

08R71-MKW-D00

Adaptable on NC750X MT version only, this set of foot deflectors improves the comfort by reducing the air pressure felt by the rider.

GRIP HEATER

08T70-MKW-D70

This set of heated grips provide 360° efficient heating for the rider's hands in cold weather. It features adjustable heat levels, smart heat allocation, and is ntegrated seamlessly with the bike's design.

• 5 level temperature adjustment

• Easy grip due to the same thickness as standard grips

• Built- in voltage monitoring system prevents the battery from draining

• Memory function

FOG LIGHTS KIT

08ESY-MKW-FLS

Set of 2 additional front led lights that increase the riders' visibility during adverse weather conditions while they make them more noticeable for the surrounding traffic.

Note: Front Side Pipes (08P70-MKW-D00) are required (sold separately).

FRONT SIDE PIPE

08P70-MKW-D70

The Front Side Pipes reduces damage to exterior parts in case of contact and gives your NC750X the tough Adventure look. Front Side Pipes are required for Front Fog Lights installation (sold separately).

KNUCKLE GUARD

08P71-MKW-D70

The Knuckle Guards, are specially designed to improve the comfort by further diverting turbulent and cold air around the rider's hands.

ALARM SYSTEM KIT

08ESY-MKW-ALS

This Alarm system is specially designed for the motorcycle's protection, offering a higher level of antitheft security.

MAIN STAND

08M70-MKW-D00

The Main Stand allows secure parking on a variety of ground surfaces and assists with maintenance operations or long-term storage.

COMFORT PILLION SEAT *BLACK*

08R71-MKW-D70ZA

Thanks to its softer construction and its increased 15mm thickness, this pillion seat provides an extra level of comfort enhancing the riding experience.

• Two-tone leather finish

• Red contrasting double-stitching

• Featuring the Honda logo

COMFORT MAIN SEAT *BLACK*

08R72-MKW-D70ZA

Thanks to its softer construction and its increased volume, this rider seat provides an extra level of comfort, enhancing the riding experience without affecting the seat height.

• Two-tone leather finish

• Red contrasting double-stitching

USB CHARGER

08U00-MKW-D70

Conveniently located in the luggage compartment, this Type-C USB charger provides 15W and Allows you to power your electronic devices.

ACCESSORIES NX500

Prolink: from motocross to MotoGP race tracks

Brought for the first time to Motocross enthusiasts in 1981, the rear mono shock system patented by Honda is applied on many production models such as the CB500X, but also on the RC213V racing in MotoGP.

Accessories Packs

Tank Pad

Knuckle Guards

Front Side Pipe

Wind Screen (Smoke)

Front Led Fog Light Att

Front Led Fog Lights

Wheel Stripes Kit (17 '')

*Indi Grey Metallic (Red accent)*

Wheel Stripes Kit (19 '')

*Indi Grey Metallic (Red accent)*

Wheel Stripes Kit (17 '')

*Matte Crypton Silver Metallic*

Wheel Stripes Kit (19 '')

*Matte Crypton Silver Metallic*

Tank Bag Attachment

3L Tank Bag

Grip Heater Att

Wheel Stripes Kit (17 '') *Lemon Ice Yellow*

Wheel Stripes Kit (19 '') *Lemon Ice Yellow* *Required but not included. Not

Can't

Luggage

SIDE BAGS

08ESY-MLR-SBX

Set of semi-rigid side bags (resin-made) Honda branded and specifically designed to suit the bike's shape, with waterproof inner bags and padlocks included.

• The bags have a 16.5L carrying capacity each and feature quick-release fasteners for easy attachment and detachment.

• Material / finishing: Textured Resin & Polyester, finished in Black. Maximum load capacity per panniers: 1.4 kg.

• Dimensions: 380 mm x 230 mm x 360 mm (both) Side Bag Attachment 08L71-MLR-D81 included. Note: Rear carrier 08L71-MGZ-D80 is not included

38L TOP BOX

08ESY-MLR-TB38

The 38L Top Box is suitable for one helmet. The Honda one key system operates the top box with the motorcycle ignition key.

• Top Box Base, Lock & Key System Inner Cylinder included.

• Maximum load capacity: 6kg. Rear Carrier required 08L71-MGZ-D80ZA sold separately.

REAR CARRIER

08L71-MGZ-D80ZA

Robust rear carrier featuring integrated passenger grab handles. Required for luggage installation.

TOP BOX INNER BAG

08L75-MJP-G51

Black nylon bag with embroidered silver Honda wing logo on the top, with red zippers. Expandable from 15 to 25L. Comes with adjustable shoulder belt and carrying handles.

TANK BAG

08ESY-MKP-TKB19B

3L tank bag specially designed to fit the motorcycle tank shape. Can be easily mounted thanks to the magnetic flaps and the included attachment kit.

REAR SEAT BAG WITH ATTACHMENT

08ESY-MKP-SEAT

Functional rear bag specifically adapted to the tapered shape of the rear seat. Capacity of 15L that can be expanded to 22L. easily attached and perfectly stable when installed with the specific attachment included.

• Rain cover included.

• Dimensions in mm (W x L x H): 355 X 365 X 243

FOG LIGHTS

08ESY-MLR-FLX

Set of 2 additional front Led headlights that will increase the visibility for the riders and make them more noticeable for the surrounding traffic. The LED Fog Lights increase visibility during poor weather conditions with strong brightness and low energy consumption 11W.

Operated through a switch located in the intrument panel, and operation displayed on the TFT display of the motorcycle.

Note:Attachment 08V70-MLR-D80ZA included.

Comfort Protection

MAIN STAND

08M70-MKP-J80

The main stand provides more secure parking on various ground surfaces and eases cleaning or maintenance operations.

GRIP HEATER

08ESY-MLR-HGX

The Grip Heater is a slim handlebar accessory providing 360° efficient heating for the rider's hands in cold weather. It features adjustable heat levels, smart heat allocation, and integrates seamlessly with the bike's design. Attachment 08T70-MLR-D80 included.

12V SOCKET

08U70-MKP-D80

This practical 12V Socket allows to charge electronic devices (Provides 2A). Is conveniently located next to the instrument cluster.

TOP BOX BACKREST

08F00-MJP-G50

Designed to match the 38L Top Box, this backrest is made of polyurethane foam to improve the passenger comfort. Easy fitment with no drilling required. (Top Box sold separately)

KNUCKLE GUARDS

08P70-MKP-DQ0

The Knuckle Guards enhances the rider's comfort, by protecting hands and arms from cold, rain and diverting travelling air away.

LEG DEFLECTORS

08R70-MLR-D80

These black deflectors improve the riding comfort by reducing air flow around the rider’s waist and knees while controlling travelling air emitted by the radiator.

Design

FRONT SIDE PIPES

08P70-MLR-D80ZA

The Front Side Pipes serve a dual purpose, reducing potential damage to exterior parts in case of contact while bestowing your bike with a rugged and adventurous appearance. These pipes are strategically positioned to enhance the motorcycle's off-road capabilities, through added protection during adventurous rides. Made of stainless steel and finished in black.

TANK PAD

08P70-MGH-J20

This Tank Pad provides enhanced protection against scratches for the fuel tank.

WINDSCREEN SMOKE

08R71-MLR-D80

The Smoke Windscreen is a tinted or darkened shield attached to the front fairing. It's designed to reduce wind resistance and improve aerodynamics, enhancing the rider's performance and reducing fatigue during high-speed rides. Additionally, the smoke windscreen adds a sleek and sporty look to the motorcycle's overall appearance. Same material and size as the standard Wind Screen.

WHEEL STRIPES

08F70-MLR-D80ZA/B/C & 08F71-MLR-D80ZA/B/C

Customize your bike effortlessly with this user-friendly wheel stripes kit (one kit per wheel). Available in three colours:

• 08F70-MLR-D80ZA (Rear) & 08F71-MLR-D80ZA (Front) - Lemon Ice Yellow

• 08F70-MLR-D80ZB (Rear) & 08F71-MLR-D80ZB (Front) - Indi Grey Metallic (Red accent)

• 08F70-MLR-D80ZC (Rear) & 08F71-MLR-D80ZC (Front) - Matte Crypton Silver Metallic

ACCESSORIES CRF300L

and RALLY

You've got the look and a bit more

When you see the images of the Honda riders racing for victory in the Dakar Rally, it is easy to spot the direct lineage between their CRF450 Rally and your CRF 300.

It is not only a matter of appearance but the ultimate proof that what is developed during the toughest races can benefit everybody.

Accessories

38L TOP BOX WITH REAR CARRIER

08ESY-K1T-TB38

This kit includes all the necessary accessories to assemble a 38L Top Box in your bike. This top box is suitable for one helmet. The Honda one key system allows to operate the top box by using the motorcycle ignition key.

Maximum load capacity: 6kg

This kit contains:

• Rear Carrier Support

• Top Box Lock

• 38L Top Box

• Carrier Bracket

• Key System Inner Cylinder

38L TOP BOX INNER BAG

08L75-MJP-G51

This Top Box inner bag, is has been made to improve riders comfortability. It comes with an adjustable shoulder belt for an easy carry with embroidered silver Honda wing logo on the top, with red zippers.

• Material: Polyester PVC

• Color: Black

• Expandable from 15 to 25L

SKID PLATE

08P70-K1T-E50

The Skid Plate protects the engine and lower part of the bike. Protective coating prevents the corrosion and makes it easy to clean.

The Skid Plate is only applicable for CRF300LAP ED model.

RALLY STEP

08R79-MKS-E00

With their aggressive spike shape and a surface 57% larger than the standard ones, these Rally Steps improve the stability and control during off-road riding while reduce risk of boot slip.

• Material: Stainless Steel

USB CHARGER (TYPE-C)

08ESY-K1T-USBL (CRF2300L)/ 08ESY-K1T-USBR (CRF300 RALLY)

Conveniently located in the luggage compartment, this Type-C USB charger provides 15W and Allows you to power your electronic devices. Specific attachment is required but not included.

GRIP HEATER & ATT KIT

08ESY-K1T-GHSR/ 08ESY-K1T-GHSL

Extremely slim heated grips with integrated control for maximum rider comfort and design integration. Features 3-step variable heating levels, integrated circuit to protect the battery from draining and smart heat allocation that focuses on the area of the hands most sensitive to cold.

• GRIP HEATER RALLY KIT

08ESY-K1T-GHSR

• GRIP HEATER CRF300L KIT

08ESY-K1T-GHSL

STREET & TOURING ACCESSORIES

ACCESSORIES

CB1000 HORNET / CB1000 HORNET SP

Turning the excitement dial up to 11, in every way possible

With a reputation originating in the late 1990s – first with the CB600F Hornet, with its four-cylinder CBR engine, followed by the CB900F Hornet in the early 2000s – the Hornet name brings with it a clear identity: to be a Hornet, a motorcycle has to be fast, fun and affordable.

Accessories Packs

Can't decide? Combine them and make your own! All packs are compatible and combinable.

Design

HANDLEBAR HOLDER

08F70-MLL-D00

This handlebar holder provides additional high-quality appearance, complemented by the presence of the iconic Hornet logo as a distinctive feature.

• Crafted from durable black anodized aluminium

• Specially designed to securely fasten and position the handlebar

• Ensures optimal control, stability, and rider comfort

UNDER COWL

08F74-MLL-D00ZA

The Under Cowl is contoured around essential engine components, ensuring not only protection but more importantly, enhancing the sportiness and highlighting the design cues of the motorcycle

• Sporty Design

• Material: PA6/ABS alloy resin

• Color tone: Mat Gunpowder Black Metallic

OIL FILLER CAP

08F77-MLL-D00

The Oil Filler Cap replaces the standard cap providing an exclusive style. Its hollowed interior reduces weight while maintaining strength. The red anodization pays tribute to racing heritage, combining style, functionality, and a touch of history.

• Crafted from High quality aluminium.

• Includes a wire-lock hole for racetrack use.

• Laser-etched Honda logo.

RIDER STEPS

08R71-MLL-D00

The accessory Rider Steps enhances the sportiness while providing optimum ergonomics. By being milled from a high-strength aluminium alloy, they are particularly lightweight.

• Made of an alluminium alloy

• Two tone finish with aluminum base color by machining after anodizing

• Laser marked Honda logo

RIDER SEAT (ALCANTARA)

08R72-MLL-D00

The Main Seat enhances riding comfort while complementing the design of the Hornet. The seat is also completed with a water-repellent finish for weather protection.

• Made from premium Alcantara material

• Cushion thickness 42.5 mm

• Two-tone color finish black and grey with contrasting light grey stitching

• Provides an exceptional softness and excellent breathability

WHEEL STRIPE

08F78-MLL-D00ZB / 08F78-MLL-D00ZC

The wheel stripe add a sleek, custom accent that embellishes the wheel's rim. Featuring the Hornet logo which is seamlessly integrated, it enhances the motorcycle's aesthetics while highlighting its unique identity.

Note: 2 sets are required.

• 08F78-MLL-D00ZB Black and Grey

• 08F78-MLL-D00ZC Black and Gold

SEAT COWL

08F75-MLL-D00ZA / 08F75-MLL-D00ZB / 08F75-MLL-D00ZC/ 08F75-MLL-D00ZD

Enhance the motorcycle's appearance with the colourmatching rear seat cover, which makes the bike look sportier by giving a unique and eye-catching design.

• 08F75-MLL-D00ZA Red *R380*

• 08F75-MLL-D00ZB Grey *NHC64M*

• 08F75-MLL-D00ZC White *NHB53P*

• 08F75-MLL-D00ZD Black *NHA86M*

FRONT VISOR

08R70-MLL-D00

The Front Visor adds a stylish accent to the headlight, accentuating its iconic design.

• Constructed from durable polycarbonate

• Finished in a stylish smoke hue

• Designed to withstand the elements

• Scratch resistant coating

• Includes mounting bracket

PILLION SEAT (ALCANTARA)

08R73-MLL-D00

The pillion seat is designed to match the main Alcantara seat. It enhances riding comfort while complementing the design of the Hornet. The seat features a waterrepellent finish for weather protection.

• Made from premium Alcantara material

• Two-tone color finish black and grey with contrasting light grey stitching

• Provides an exceptional softness and excellent breathability

QUICK SHIFTER

08U70-MLL-D00

The Quick Shifter enhances both sportiness and longdistance riding comfort by allowing the user to change gears without using the clutch lever.

• Shift pedal sensitivity adjustable in three steps through the motorcycle's TFT screen menus

• Seamless up and down gear shifts without clutch lever operation

• Auto-blipper function for smooth down-shifts

• Added sporty driving dynamics highlighting the engine's characteristics

SC-PROJECT SC1-R SLIP-ON MUFFLER

0R24M-REX-024 / 0R24M-REX-025

The sportiness, sound and overall riding experience is enhanced with the slip-on muffler by SC-Project. Homologated for road use, features a full carbon body, and includes a carbon fibre heel protector which has been exclusively designed for the CB1000 Hornet.

• 0R24M-REX-024 Applicable to CB1000 Hornet STD version

• 0R24M-REX-025 Applicable to CB1000 Hornet SP version

Comfort & Protection

Luggage & Maintenance Performance

TANK PAD

08P70-MGC-JQ0

The tank pad, featuring the Honda logo, is exclusively designed to fit the tank shape, protecting it from scratches.

• Material: Flexible PVC

• Surface Treatment: Grained finish

• Color: Black

RADIATOR GRILL

08F71-MLL-D00

The Radiator Grill's design effectively mitigates the risk of radiator core damage caused by debris impact.

• Material: Stainless steel

• Combines efficiency and protection

• Features an authentic mesh design

• Perfectly fits with the motorcycle design

GRIP HEATER

08ESY-MLL-HG

Extremely slim heated grips controlled by a simple operation of the integrated handle switch and displayed on the bike's TFT screen.

• 5 variable heating levels

• Integrated circuit prevents the battery from draining

• Memory function recalls the last setting after switching the motorcycle back on

• Same thickness as standard grip

The kit includes:

• Grip Heater Attachment (08T70MLLD00)

• Grip Heater (08T71-MKK-D02)

• Honda Pro grip Cement (08CRD-HGC-23GHO)

INDOOR BODY COVER

08M70-MLL-D00

The Indoor Body Cover offers a tailored fit that impeccably envelops the bike, ensuring protection against dirt and dust when in storage. It has been specifically designed for indoor use, please note that it is not waterproof.

• Made from a flexible and stretchable material

• Features the Hornet and Honda logos

TANK BAG

08ESY-MLL-TB

Practical 3L tank bag featuring a clear pocket on top for a convenient smartphone storage. Easy to fit thanks to the attachment included, the tank bag doesn't interfere with the handling of the motorcycle.

• Dimensions in mm (W x L X H): 178 x 285 x 130.

• Rain cover is included.

• Material: 100% polyester

• Color: Black

This kit includes:

• Tank Bag (08L71-MKJ-D00)

• Tank Bag Attachment (08L72-MKJ-D00)

SEAT BAG

08ESY-MLL-RSB

A simple and functional rear bag specifically adapted to the tapered shape of the rear seat.

• Easy attachment system included provides stable mounting

• Bag capacity of 15L which

• Color: Black

includes:

ACCESSORIES Hornet CB750

Rebirth of a legend

High-performance, flexible and fun, the Honda Hornet launched in Europe in 1998 and raced straight to the front of the sports naked field.

The undisputed pioneer in its class, the Hornet’s popularity was fuelled by the rise of the internet where sports minded Hornet enthusiasts formed loyal communities known as the Swarm. Now the Hornet buzzes back...

Accessories Packs

Performance & Design

QUICK SHIFTER

08U70-MLB-D00

The Hornet's quick-shifter allows up and down clutchless gear changes, with auto blipper function for smooth and instant shifting which enables stress-free riding not only for sports driving but also for increased comfort.

Features adjustable operation load in three stages.

METER VISOR

08R70-MLB-D20

The meter visor, which accents the headlight, protects the rider’s upper body with windbreak performance to improve the rider's comfort.

• Screen material: Polycarbonate

• Screen thickness: 4.0 mm

• Color: Smoke (Visible radiation transmission 20%)

GRIP ENDS

08F72-MLB-D00

Give the CB750 a sportier look with these Grip Ends, featuring the Honda logo, while providing additional protection in case of fall.

RIDER STEPS

08R71-MLB-D00

Foot pegs made of aluminium and finished in gloss black, polished aluminium details and featuring the Honda logo, enhancing the Premium feel of the Hornet.

WHEEL STRIPES

08F73-MLB-D00ZB / 08F73-MLB-D20

The CB750 wheel stripes, featuring the Hornet logo, increase the sportiness of the motorcycle. The kit includes 2 stripes per wheel side, so 2 kits are required per motorcycle.

Note: Only for Hornet trademark registration area.

• 08F73-MLB-D00ZB WHEEL STRIPE IN RED

• 08F73-MLB-D20 WHEEL STRIPE *NHC64M*

SC PROJECT SC1-R MUFFLER

0R24M-PEX-013

The sportiness, sound and overall riding experience is enhanced with the slip-on muffler by SC-Project. Homologated for road use, includes a carbon fiber heel protector exclusively designed for the CB750 Hornet. This product is a customized part.

MAIN SEAT

08R74-MLB-D00ZA

Two-tone PVC leather and red double stitched rider seat, featuring the Honda logo, designed to enhance the sense of luxury.

SEAT COWL

08F72-MLB-D20ZA / 08F72-MLB-D20ZB

Colour-matching Seat Cowl, featuring a comfort pad for the rider, that replaces the standard passenger seat for a sportier appearance.

• 08F72-MLB-D20ZA SEAT COWL *RED*

• 08F72-MLB-D20ZB SEAT COWL *GRAY*

HANDLE HOLDER

08F71-MLB-D00

Precision-cut aluminium handlebar holder featuring the Hornet logo that provides additional high-quality appearance to the CB750 Hornet.

HEAD LIGHT STRIPE

08F71-MLB-D20ZA / 08F71-MLB-D20ZB / 08F71MLB-D20ZC / 08F71-MLB-D20ZD

The colour-matching Headlight Stripe elevates the visual appeal for your CB750 Hornet.

• 08F71-MLB-D20ZA HEAD LIGHT STRIPE *NHB54P*

• 08F71-MLB-D20ZB HEADLIGHT STRIPE *NHA86M*

•08F71-MLB-D20ZC HEAD LIGHT STRIPE *NHA30M*

•08F71-MLB-D20ZD HEAD LIGHT STRIPE *B197M*

RADIATOR GRILL

08F70-MLB-D20

The radiator grill is a great way to enhance the aesthetics of the CB750 Hornet while protecting the radiator form flying debris.

CUSTOMIZED

Comfort & Protection Luggage

SIDE BAGS

08ESY-MLB-SDB

Set of semi-rigid side bags (resin-made) Honda branded and specifically designed to suit the bike's shape, with waterproof inner bags and padlocks included. The bags have a 16.5L carrying capacity each and feature quickrelease fasteners for easy attachment and detachment.

Material / finishing: Textured Resin & Polyester, finished in Black. Maximum load capacity per panniers: 1.4 kg.

Side Bags attachment included 08L74-MLB-D00.

REAR SEAT BAG

08ESY-MLB-RRSEAT

A simple and functional rear bag specifically adapted to the tapered shape of the rear seat. Easy attachment and stable mounting is possible when installed with the rear seat bag attachment, and a rain cover is included for added practicality. Bag capacity is of 15L, which can be expanded to 22L. Rear Seat Bag Attachment 08L70-MKP-T00 and Protective Film 08P71-MLB-D00 included with the kit.

3L TANK BAG

08L89-MKS-E00

This light and compact Tank Bag features a transparent pocket and it's ideal to store small personal items.

Unnoticeable while steering the bike, this Tank Bag is firmly attached thanks to a one-touch buckle and a magnet. A rain cover is included.

Capacity: 3 Liters

Maximum load weight: 1.5 kg

SIDE TANK PAD

08P70-MLB-D20

Elevate your CB750 Hornet's performance and longevity with the precision-engineered Honda Side Tank Pads, it helps protect fuel tank sides from scratches and improves rider's grip.

TANK PAD

08P70-MGC-JQ0

The tank pad, featuring the Honda logo, is exclusively designed to fit the tank shape, protecting it from scratches.

GRIP HEATER

08ESY-MLB-GHS

The grip heater kit provide warmth enhancing comfort during the rides.

Operated with the handlebar switch, the TFT monitor displays the temperature adjustment level.The last level selected is memorised when the ignition is switched off.

SKID PAD

08P70-MLB-D00

The skid pad, featuring the Honda logo, reduces damage of the fairing in case of a fall.

ALARM EASY KIT

08ESY-MLB-ALS

This Alarm system is specially designed for the motorcycle's protection, offering a higher level of antitheft security.

ACCESSORIES HORNET CB500

Is reliability supposed to be boring?

It’s not rare to find CB500 proudly boasting more than 300,000 kms (more than 186,000 miles), but the long-time favourite of the couriers and the driving school is much more than a workhorse. Started in France in 1996, the CB500 Cup spread across Europe quickly and helped young talents such as Sebastien Charpentier or James Toseland to make a name by themselves, on a budget.

Accessories Packs

WHEEL STRIPES KIT

08F72-MKP-J40ZD / 08F72-MKP-J40ZE / 08F72-MKP-J40ZG / 08F72-MKP-J40ZH / 08F72-MKP-J40ZJ

Customize your bike effortlessly with this user-friendly wheel stripes kit (one kit per wheel).

You can choose from five striking colors:

• 08F72-MKP-J40ZD Lemon Ice Yellow

• 08F72-MKP-J40ZE Indi Grey Metallic

• 08F72-MKP-J40ZG Pearl Metalloid White

• 08F72-MKP-J40ZH Matte Crypton Silver Metallic

• 08F72-MKP-J40ZJ Seal Silver Metallic

SEAT COWL

08F76-MJW-J00ZF

A seat cowl is a custom-shaped and color-matched cover designed to replace the standard passenger seat on a motorcycle, offering a sleek and sporty appearance.

Available in the following colours:

• 08F76-MJW-J00ZC Mat Gunpowder Black Metallic *NH436M*

• 08F76-MJW-J00ZR Grand Prix Red *R380*

• 08F76-MJW-J00ZF Graphite Black *NHB01*

Luggage

METER VISOR

08R70-MLR-D40

The meter visor not only accentuates the headlight but also improves rider comfort by providing windbreak performance, protecting the upper body from wind. This practical accessory enhances the riding experience, ensuring a more enjoyable and comfortable journey for the rider.

35L TOP BOX KIT

08ESY-MKP-TB19

Kit including a 35L Top Box and all the components needed to install it on the bike (rear carrier and base).

The Key system included in the kit allows to operate the Top Box with the motorcycle's same ignition key. Inner bag 08L09-MGS-D30 also included.

TANK BAG

08ESY-MKP-TKB19

A simple and functional tank bag adapted to the shape of the motorcycle tank. Thanks to the specific attachment included, the stable mounting of the tank bag does not disturb the handling of the vehicle. Clear pocket on the top of the bag makes it possible for easy smart phone storage. Bag capacity is 3L and a rain cover is included.

Dimensions in mm (W x L x H): 178 x 285 x 130

Protection

TANK PAD

08P61-KYJ-800

A three-piece adhesive tank that helps protecting the tank's paintwork from scratches, featuring a stylish carbon fiber design adorned with the Honda Wing logo.

Maintenance &

Comfort

MAIN STAND

08M70-MKP-J40

The Main Stand allows a more secure parking on variable ground surfaces and eases cleaning or maintenance operations.

GRIP HEATERS

08ESY-MLR-HG

The Grip Heater is a slim handlebar accessory providing 360° efficient heating for the rider's hands in cold weather. It features adjustable heat levels, smart heat allocation, and integrates seamlessly with the bike's design. Attachment is included in this Easy Kit.

REAR SEAT BAG

08ESY-MKP-RRSEAT

Functional rear bag specifically adapted to the tapered shape of the rear seat. Capacity of 15L that can be expanded to 22L. easily attached and perfectly stable when installed with the specific attachment included. Rain cover included.

Dimensions in mm (W x L x H): 355 x 365 x 243

12V ACCESSORY SOCKET

08U70-MJW-J00

This convenient 12V Socket allows to charge electrical equipments (Provides 2A).

ACCESSORIES CB650R

Where are these beautiful curves coming from?

One of the most distinctive attributes of the CB650R is its swooping four-intoone exhaust system. This beautiful design is a tribute to another iconic Honda: the CB400F also known as the CB 400 Four. Produced between 1975 and 1977, the CB 400 Four caused quite a stir thanks to its café racer look. Delivering only 37 bhp (28 kW) at 8,500 rpm and 24 lb·ft (33 N·m) at 7,500 rpm, its four-in-line engine was not meant to take the racetracks by storm. Yet, back in the late 70’, some versions upgraded to 492cc were capable of 13,500 rpm and producing an estimated 60 bhp (45 kW).

Accessories Packs

Design

METER VISOR

08R70-MKN-D50

The meter visor is fitted with a high quality aluminum panel to further enhance the iconic look of the CB650R. Required stay sold separately.

METER VISOR STAY

08R70-MKY-E20

Set of stays & other necessary components to install the Meter Visor (sold separately).

FRONT FENDER PANELS

08F73-MKN-D50

Pair of high-quality aluminium panels designed to fit the front fender and give your motorcycle the ultimate Neo Sport Cafe look.

SHROUD COVERS

08F72-MKY-E20

Beautifully engraved with the CB650R logo, this pair of high quality aluminium shroud covers will enhance the design of the motorcycle while highlighting the Neo Sports Cafe design.

SIDE COVERS

08F75-MKN-D50

Pair of high quality aluminium side covers which add to the iconic look of this model.

UNDER COWL

08F71-MKN-D50ZA

The Under Cowl enhances the appearance of the CB650R by adding a touch of sportiness. All parts required for the installation are included. Available in Mat Gun Powder Black Metallic.

REAR SEAT COWL

08F71-MKY-E20ZB

Elevate your motorcycle's racing aesthetics with this Rear Seat Cowl, complete with a comfort pad. For a truly exclusive appearance, consider the optional Aluminum Seat Cowl Plate 08F76-MKN-D50 (available separately). Replaces the pillion seat.

Available in the following colour options:

• 08F71-MKY-E20ZA Grand Prix Red *R-380*

• 08F71-MKY-E20ZB Mat Gunpowder Black Metallic *NH-436*

SEAT COWL PLATE

08F76-MKN-D50

High quality aluminium plate that can be added to the rear seat cowl to further enhance the iconic look of the motorcycle. (Rear Seat Cowl sold separately)

WHEEL STRIPES

08F84-MFJ-810A / 08F84-MFJ-820A / 08F84-MFJ-830A / 08F84-MFJ-840A / 08F84-MFJ-850A

Set of Wheel Stripes containing 3 stripes per wheel side and including Honda Racing stickers. Available in 5 colours:

• 08F84-MFJ-810A - Pearl Sunbeam White

• 08F84-MFJ-820A - Italian Red

• 08F84-MFJ-830A - Candy Tahitian Blue

• 08F84-MFJ-840A - Dragon Green Metallic

• 08F84-MFJ-850A - Digital Silver Metallic

OIL LEVEL GAUGE

08F81-MKY-E20

The Oil level gauge is made out of high-quality, precision-cut aluminum. The filler cap is anodized in vibrant red, and both sides of the handgrip are laseretched with the Honda logo. It has a hole to wire it for those riders who want to use it on a circuit.

Comfort & Luggage

GRIP HEATERS

08ESY-MKY-HG

Extremely slim heated grips which provide 360° heat around the grips. Temperature adjustment level is displayed on the TFT monitor while and operated through the handle switch. Features 5-step variable heating levels, integrated circuit to protect the battery from draining and smart heat allocation that focuses on the area of the hands most sensitive to cold. Attachment and high temperature cement included.

TANK BAG SET

08ESY-MKJ-TKB18

A simple and functional tank bag adapted to the tank of the unit. Thanks to the specific attachment included, the stable mounting of the tank bag does not disturb the handling of this machine. A clear pocket on the top of the bag makes it possible for easy smart phone storage.

• Bag capacity: 3L

• Rain cover included.

• Dimensions (W x L x H): 178 x 285 x 130

Performance & Protection

QUICK SHIFTER *

08U72-MKN-D50

By measuring the intensity of the shifting input, the quick shifter enables the rider to change gear without the need to operate the clutch lever or shut the throttle. The system aids upshifting, maximizing the riding experience.

REAR SEAT BAG SET

08ESY-MKJ-STB18

A simple and functional rear seat bag specifically adapted to the tapered shape of the rear seat. Easy and stable mounting when installed with the included attachment. With the following specifications:

• 15L of Capacity that can be expanded to 22L

• Included Rain cover

• Dimensions in mm (W x L x H): 355 x 365 x 243

TANK PAD (CB LOGO)

08P71-MKN-D50

This Tank Pad featuring the CB logo helps to protect the Tank paintwork from scratches and rubbing.

TANK SIDE STICKER

08F74-MKY-E20ZA

The Tank Side Stickers, featuring the CB logo, not only enhance the motorcycle's appearance but also provide an added layer of protection to the fuel tank's surface, shielding it from potential scratches and damage.

ACCESSORIES REBEL 1100

Do you really need a clutch lever?

The Dual Clutch Transmission made its worldwide debuts for motorbikes in 2010 with the Honda VFR 1200. It has been constantly improved since then. DCT allows the rider to focus on accelerating, turning and braking, rather than gear shifting. This increases confidence and control for the rider. The DCT is completely different from the automatic transmission used by most scooters: it is structurally a conventional 6-speed transmission electronically controlled.

Accessories Packs

Design & Protection

HEAD LIGHT COWL*

08ESY-MLA-HL

Adopt the power cruiser style with this head light cowl. It will also make your ride more comfortable by reducing the wind pressure to your upper body. The stay is included.

SCREEN COWL

08ESY-MLA-SCS

The screen cowl improves the overall comfort of the rider by reducing the airflow around rider’s arms and shoulders. Is designed to fit in the front of the bike adding a custom design. This kit includes:

• Screen Cowl (08R79-MLA-AA0)

• Scren Cowl Attachment (08R77-MLA-AA0)

• Screen Cowl Stay (08R76-MLA-AA0)

MAIN SEAT *YRA04L* BROWN

08R73-MLA-AA0ZA

This custom main seat in brown boosts the wild design of the Rebel thanks to its diamond-stitch wadding. The welder-patterned process used to mark the surface protects the foam against humidity.

MAIN SEAT *NH1L* BLACK

08R73-MLA-AA0ZB

This custom main seat in black boosts the wild design of the Rebel thanks to its diamond-stitch wadding. The welder-patterned process used to mark the surface protects the foam against humidity.

BROWN PASSENGER SEAT

08R73-MLA-J00ZA

Add a passenger seat, in buffalo brown, and it will boost the wild design of the Rebel. This passenger seat matches perfectly with accessory brown rider seats.

BAR END MIRROR*

08V72-MLA-AA0

Made of machined aluminium the Bar End Mirrors provide a streamlined, modern look that complements the Rebel 1100’s cruiser style, thanks to a minimalist design that reduces visual clutter on the handlebars.

RADIATOR SIDE COVER*

08P70-MLA-AA0

Set of sleek and durable Radiator Side Covers designed to enhance both the aesthetics and functionality of the motorcycle. The anodized aluminum finish not only provides a stylish, modern look but also offers excellent resistance to corrosion and wear. This accessory fits snugly over the radiator sides, protecting it from debris and potential damage while adding a custom touch to the bike’s overall appearance. Their lightweight yet sturdy construction ensures they don’t add unnecessary weight, maintaining the bike’s performance and handling.

FRONT FENDER *NHA86M*

08P71-MLA-AA0ZA

The Short Front Fender is a high-quality accessory featuring a Rebel logo. It is designed to fit seamlessly on the front of your bike, offering a lightweight and sporty addition to enhance your ride's appearance.

WHEEL STRIPES

08F70-MLA-A00ZA / 08F71-MLA-A00ZA

Available in Mat Axis Gray Metallic, the wheel stripes add a final touch and protection to our rims. Each kit can underline one wheel, the front one or the rear one:

• 16" Rear Wheel Stripes

08F70-MLA-A00ZA

• 18" Front Wheel Stripes

08F71-MLA-A00ZA

FR FORK BOOT

08F70-MLA-AA0

Made of high-quality rubber and adjusted with metal bands on each edge, the Fork Boots have been tested to protect the tubes against scratches and to ease smooth fork motion.

CENTER TANK PAD

08P70-MLA-A00

The tank’s rubber-made pad is exclusively designed to fit the tank shape, protecting it from scratches. The center tank pad has the “Rebel” logo. The diamond-cut pattern on the surface matches the wadding design of the special seat (sold separately).

SIDE TANK PADS SET

08P71-MLA-A00

These rubber-made pads are exclusively designed to fit the tank shape, protecting it from scratches. They contribute to a better handling by improving the grip from the knees.

Comfort Luggage

COMFORT

MAIN SEAT

08R70-MLA-AA0ZA / 08R70-MLA-AA0ZB

The Comfort Main Seat enhance rider's comfort, especially in longer rides, and ride quality, given that with the added cushion, riders will experience less vibration and shock from the road, leading to a smoother riding experience.

Thickness increased by 10mm

• 08R70-MLA-AA0ZA Comfort Main Seat *YRA04L* BROWN

• 08R70-MLA-AA0ZB Comfort Main Seat *NH1L* BLACK

COMFORT PASSENGER SEAT

08R70-MLA-DA0ZA / 08R70-MLA-DA0ZB

The Comfort Pillion Seat enhance pillion's comfort, especially in longer rides, and ride quality, given that with the added cushion, passengers will experience less vibration and shock from the road, leading to a smoother riding experience.

Thickness increased by 30mm.

• 08R70-MLA-DA0ZA Comfort Passenger Seat *YRA04L* BROWN

• 08R70-MLA-DA0ZB Comfort Passenger Seat *NH1L* BLACK

KIT BACKREST

08ESY-MLA-BRSBL / 08ESY-MLA-BRSBR

The Passenger Backrest enhances safety and comfort for the passenger.

• 08ESY-MLA-BRSBL Kit Backrest Black

• 08ESY-MLA-BRSBR Kit Backrest Brown

RIGHT SADDLE BAG

08L04-K87-A31

Made of a sturdy and lightweight ballistic nylon, this 10 litres capacity saddle bag adds to the tough style of your Rebel. It can be attached/detached in one touch thanks to its three-point adapter (sold separately).

Equipped with a waterproof inner bag and easy to carry, this practical saddlebag is a must-have for everyday use. The Right Saddle Bag Support is not included.

LEFT SADDLE BAG

08L05-K87-A31

Made of a sturdy and lightweight ballistic nylon, this 14 litres capacity saddle bag adds to the tough style of your Rebel. It can be attached/detached in one touch thanks to its three-point adapter (sold separately).

Equipped with a waterproof inner bag and easy to carry, this practical saddlebag is a must-have for everyday use. The Left Saddle Bag Support is not included.

SADDLE BAG SUPPORT

08L72-MLA-J01 / 08L73-MLA-J01

This support is required for saddlebag attachment on your motorcycle. Saddlebags are sold separately and can be mounted with or without the Rear Carrier.

• Right side 08L72-MLA-J01

• Left side 08L73-MLA-J01

WINDSHIELD*

08R71-MLA-A30

This windshield, which is fitted on the screen cowl, improves the overall comfort of the rider by reducing the airflow around rider’s arms and shoulders. The same protection applies for adverse weather keeping the body drier and warmer and against flying debris.

It has a polycarbonate surface processed with a hard coating to make the surface resistant to damage.

GRIP HEATERS WITH ATTACHMENT

08T70-MLA-AA0

Extremely slim heated grips focusing on the area of the hands most sensitive to cold with a 5-level integrated controller for maximum rider comfort.

• Handlebar switch

• Memory function

• TFT monitor displays the selected heat level.

• An integrated circuit protects the battery from draining

REAR CARRIER

08L70-MLA-J00

The Rear Carrier allows to carry additional luggage, providing rope hooks on each side for securing cargo. At the same time, improves pillion comfort by offering grabbing points, while being compatible with the Passenger Backrest and the Saddle Bags Supports. Allowable cargo load: 3.0 kg

SOLO CARRIER

08L71-MLA-J00

The Solo Carrier replaces the passenger seat. It enables to secure additional luggage while enhancing the "Custom" appearance thanks to the curved geometry and the Rebel logo. Allowable cargo load: 1.5 kg

ACCESSORIES REBEL 500

From one Rebel to another?

Since 2013, The Bike Shed London is a motorcycle exhibition like no other celebrating the creative culture around the custom bike scene. It is there that Keita Mikura, the Rebel’s Project Leader, was inspired to create a new kind of machine for young riders, leaving free space for further customization. In 2017, the Rebel concept became reality and reached another level, thanks to the vision and the craftsmanship of 2 Brits: Dan Gold, a tattoo artist and Russ Brown, a custom bike builder.

Accessories Packs

Can't

Design & Protection

HEADLIGHT COWL

08R70-K87-A30

With its dark smoke insert on the top, the exclusive design of this headlight cowl will boost the tough stance of the Rebel while providing additional wind protection. Made of injection-moulded ABS resin finished with a matte black coating. Not compatible with the Meter Visor.

FRONT FORK BOOTS SET

08F70-K87-A31

Made of high-quality rubber and adjusted with metal bands on each edge, the Fork Boots have been tested to protect the tubes against scratches and to ease smooth fork motion.

Mounted with the Fork Covers (sold separately), they accentuate the 500 Rebel's unique attitude.

FRONT FORK COVERS SET

08F71-K87-A31

The matt black coating of these Front Fork Covers accentuates the Rebel’s tough-image. They feature internal rubber bands to prevent wobbles against the fork tubes.

MAIN SEAT*

08R70-K2Y-J40ZA / 08R70-K2Y-J40ZB

The custom rider seat, boosts the wild design of the Rebel thanks to its diamond-stitch wadding. The welder-patterned process used to mark the surface protects the foam against humidity.

• 08R70-K2Y-J40ZA MAIN SEAT *YRA04L* BROWN

• 08R70-K2Y-J40ZB MAIN SEAT *NH1L* BLACK

TANK PAD CENTER

08P70-K87-A30

This rubber-made pad is exclusively designed to fit the tank shape and to protect it from scratches. Displaying a “Rebel” logo, the center pad presents also a diamond-cut pattern that is matching the design of the special seat, which is sold separately.

Made of high-quality rubber, this pad is mounted with double-sided tape and is available in Black.

PASSENGER SEAT BROWN

08R71-K87-J80ZA

Add a passenger seat, in buffalo brown *YRA04L*, and it will boost the wild design of the Rebel. This passenger seat matches perfectly with the custom rider seat brown.

SIDE TANK PADS

08P71-K87-A30

These rubber-made pads are exclusively designed to fit the tank shape and to protect it from scratches. The diamond-cut pattern of the surface matches the design of the special seat, which is sold separately. Made of high-quality rubber, the tank side pads improve the grip of the knees.

Mounted with double-sided tape and available in Black.

METER VISOR

08R74-K87-A30

The meter visor improves comfort by protecting the rider’s upper body from adverse weather conditiond and deflecting travelling air around the shoulders. Made of high-quality 4 mm-thick polycarbonate resin, this meter visor presents a rounded edge finish that maximizes the quality feel. Not compatible with the headlight cowl.

GRIP HEATERS KIT

08ESY-K2Y-GHS

The Grip Heater is a slim handlebar accessory providing 360° efficient heating for the rider's hands in cold weather. It features adjustable heat levels, smart heat allocation, and integrates seamlessly with the bike's design. Note: Attachment is included in this Kit.

COMFORT PASSENGER SEAT

08R72-K2Y-J40ZA / 08R72-K2Y-J40ZB

The thickness of the Comfort Pillion Seat is increased to enhance pillion's comfort, especially in longer rides, and ride quality, given that with the added cushion, passengers will experience less vibration and shock from the road, leading to a smoother riding experience.

• 08R72-K2Y-J40ZA COMFORT PASSENGER SEAT BROWN

• 08R72-K2Y-J40ZB COMFORT PASSENGER SEAT BLACK

Luggage

LEFT OR RIGHT SADDLE BAG WITH SUPPORT

08ESY-K87-BAGS / 08ESY-K87-BAGL

Made of a sturdy and lite weight ballistic nylon, these saddle bags add an extra layer of Rebel attitude to your bike. They can be attached/detached in one-touch thanks to their three-point adapter included. Equipped with a waterproof inner bag and easy to carry, these practical saddle bags are a must-have for everyday use.

• 08ESY-K87-BAGL - Left side / 14 Litres capacity / Dimensions in mm (W x H x D):

320 x 325 x 139

• 08ESY-K87-BAGS - Right side / 10 Litres capacity / Dimensions in mm (W x H x D):

320 x 225 x 139

• Allowable cargo load: 3.0 kg

• Specific adapter included

REAR CARRIER

08L70-K87-J80

Robust and light, this rear carrier suits the bike's body and will not impair the passenger comfort. It is compatible with the backrest sold separately. Allowable cargo load: 3.0 kgs, Size: 200 mm x 223 mm

BACKREST

08R71-K2Y-J40ZA / 08R71-K2Y-J40ZB

This Backrest is designed to increase the passenger comfort.

• 08R71-K2Y-J40ZA BACKREST BROWN

• 08R71-K2Y-J40ZB BACKREST BLACK

HIGH SCREEN

08R04-K2Y-J40

This high screen has been designed to minimize the exposure of the rider to rain and wind in adverse weather conditions.

ADJUSTABLE BRAKE HANDLE LEVER

08U70-K2Y-J40

This black aluminium brake lever is adjustable to the rider's preference. By selecting 1 of the 5 pre-set positions, it is possible to adjust the distance between the lever and the handgrip.

12V SOCKET

08U70-K2Y-A00

The ACC socket can be neatly mounted beside the meter thanks to its included stay. The attached rubber cap prevents any fluids or unwanted objects from entering inside the socket.

THROW-OVER SADDLE BAGS

08ESY-MLH-SB

Make your Rebel 500 a Classic Custom with this pair of saddle bags made of synthetic leather. They are also practical thanks to their storage capacity of 16 Litres each. Saddlebag support kit included.

SOLO CARRIER

08L00-K2Y-T40

Simple carrier for solo riding which draws soft arch geometry along with rear fender. Replaces the passenger seat.

ACCESSORIES CL500

Street Scrambler

Honda has a long history of getting smaller capacity bikes just right for riders around the world. A combination of easy usability, useful engine performance, affordability and distinct individuality equal motorcycles that, over time, come to mean so much to their owners.

The 1962 twin-cylinder CL72 was one such bike. One of the first true ‘street scramblers’ it was raced, ridden and enjoyed for years. It proved that a lightweight bike with off-road dynamics was great fun around town and, latterly, the high-barred, high-piped style has become an iconic signature for many 21st century riders.

Accessories Packs

Protection & Design

REAR SIDE COVER

08F71-K3S-JA0 / 08F71-K3S-JB0

The Side Cover, enhances the scrambler appearance of the CL500.

Made of a lightweight and resistant polypropylene resin.

Note: Can be complemented by a specifically designed stripe 08F72-K3S-JB0ZD, sold separately.

• 08F71-K3S-JA0 SIDE COVER *WHITE*

• 08F71-K3S-JB0 SIDE COVER *BLACK*

FRONT FENDER

08F72-K3S-JA0 / 08F70-K3S-JB0

It is a specially designed up fender that matches the vehicle design, and uses lightweight and shockresistant polypropylene resin. With this fender, the scambler look is enhanced.

In addition, a lower fender that protects the brake hose etc. is included.

• 08F72-K3S-JA0 FRONT FENDER *WHITE*

• 08F70-K3S-JB0 FRONT FENDER *BLACK*

KNUCKLE GUARDS

08P71-K3S-JA0 / 08P70-K3S-JB0

Specially designed knuckle guards that match the motorcycle design.

Deflect travelling air around the rider's hands and arms and prevent impacts from flying debris, improving the ride comfort.

• 08P71-K3S-JA0 KNUCKLE GUARD *WHITE*

• 08P70-K3S-JB0 KNUCKLE GUARD *BLACK*

HEAD LIGHT VISOR

08R71-K3S-JA0 / 08R70-K3S-JB0

Specifically designed to match the CL500, the Head Light Visor does both increase the rider's comfort by deflecting travelling air and also enhance the scrambler appearance of the motorcycle.

Made of a lightweight and resistant polypropylene resin. Note: Can be complemented by a matching Head Light Visor stripe, 08F73-K3S-JB0ZB which is sold separately.

• 08R71-K3S-JA0 HEAD LIGHT VISOR *WHITE*

• 08R70-K3S-JB0 HEAD LIGHT VISOR *BLACK*

TANK PAD CENTER

08P70-K3S-JA0

The tank pad, featuring the Honda logo, helps to protect the Tank paintwork from scratches and rubbing.

WHEEL STRIPES

08F74-K3S-JA0ZA / 08F75-K3S-JA0ZA

Exclusively designed Wheel Stripes that enhance the Scrambler appearance and crafted from durable, weather-resistant materials. They won't fade or peel, ensuring a long-lasting, vibrant look despite their simple installation process.

1 set of each size to accessorize a motorcycle unit:

• 08F74-K3S-JA0ZA - 17" (Rear Wheel)

• 08F75-K3S-JA0ZA - 19" (Front Wheel)

RALLY STEPS

08R72-K3S-JA0

The Rally Steps decrease boot slippage by means of a wide tread with an aggressive spike shape. They also further improve stability and control during off-road riding.

HIGH SEAT

08R70-K3S-JA0ZC

Optional 30mm higher seat, with a flat design for enhanced riding flexibility and an added scrambler appearance.

Its extra padding improves the ride comfort. Features the Honda logo and is mafe of a luxurious brown skin with contrasting black stitching.

REAR CUSHION COVER

08F73-K3S-JA0

This rear shock cover will protect the rear suspension of the CL500 while provide a tougher look. Made from lightweight and resistant polypropylene, it is finished in black colour.

REAR SIDE COVER STRIPE

08F77-K3S-JA0ZA / 08F72-K3S-JB0ZD

This exclusive stripe is specifically designed to complement the Rear Side Cover, adding an extra touch of colour.

• 08F77-K3S-JA0ZA REAR SIDE COVER STRIPE *BLACK*

• 08F72-K3S-JB0ZD REAR SIDE COVER STRIPE *GRAY*

HEAD LIGHT VISOR STRIPE

08F76-K3S-JA0ZA / 08F73-K3S-JB0ZB This exclusive stripe is specifically designed to complement the Head Light Visor, adding an extra touch of colour.

• 08F76-K3S-JA0ZA HEAD LIGHT VISOR STRIPE *BLACK*

• 08F73-K3S-JB0ZB HEAD LIGHT VISOR STRIPE *GRAY*

38L TOP BOX

08ESY-MLP-TB38

The 38L Top Box is suitable for one helmet. The Honda one key system allows to operate the top box by using the motorcycle ignition key. Maximum load capacity: 6kg Required accessories included:

• Rear Carrier (08L70-K3S-JA0)

• Carrier Bracket (08L70-MKK-D00)

• Top Box Lock (08L71-K1T-E10)

• Top Box 38L (08L71-MJP-G50)

• Key Sytem Inner Cylinder (08M71-KZL-841)

TOP BOX BACKREST

08F00-MJP-G50

Designed to match the 38L Top Box, this backrest is made of polyurethane foam to improve the passenger comfort. Easy fitment with no drilling required. (Top Box sold separately)

INNER BAG FOR 38L TOP BOX

08L75-MJP-G51

Black nylon bag with embroidered silver Honda wing logo on the top, with red zippers. Expandable from 15 to 25L. Comes with adjustable shoulder belt and carrying handles.

REAR CARRIER

08L70-K3S-JA0

The Rear Carrier with grips will improve the passenger comfort. It can be equipped with the Top Box (08L71MJP-G50) sold separately.

In addition, it is equipped with six rope hooks for stable loading.

LEFT SADDLE BAG

08L05-K87-A31

Made of a sturdy and lightweight ballistic nylon, this saddlebag adds to the tough style of your motorcycle. It can be attached/detached in one-touch thanks to its three-point adapter (sold separately). Equipped with a waterproof inner bag, easy to carry with its handle or shoulder strap, this practical saddlebag is a must-have for everyday use.

• Dimensions in mm (W x H x D): 320 x 325 x 139

• Capacity: 14 litres

• Allowable cargo load: 3.0 kg

Note: Required Support sold separately.

Comfort

GRIP HEATER KIT

08ESY-MLP-GHS

Extremely slim heated grips which provide 360° heat around the grips. Features integrated control for maximum rider comfort and design integration.

• 5-step variable heating levels

• Integrated circuit to protect the battery from draining

• Smart heat allocation that focuses on the area of the hands most sensitive to cold

This pack contains:

• Grip Heater (08T71-K3S-JA0)

• Grip Heater Attachmet (08T70-K3S-JA0)

SADDLE BAGS SUPPORT

08L71-K3S-JA1

Specific adapter to assemble the saddle bags onto the bike. Not included: Saddle Bags (08L05-K87-A31 / 08L02-K0Z-J01)

12V SOCKET

08E70-K3S-JA0

This 12V Socket is ideal to power or charge electrical equipment.

ADJUSTABLE BRAKE LEVER

08U70-K3S-JA0

This accessory brake lever allows the rider to adjust the lever position to the optimum position for an excellent reach. Features 5 positions with 6 mm aproximately of adjustment between them.

ACCESSORIES GB350

The simple, universal appeal of a motorcycle.

That’s what Honda’s engineers were looking to capture when thoughts turned to developing the new GB350S. Using all the technology at their fingertips, their aims were to make a timeless, small capacity, single-cylinder, air-cooled engine that will perform in a modern environment both enjoyably and efficiently.

Accessories Packs

Can't

SINGLE SEAT COWL

08F70-K0Z-D20ZB

Enhance the style of the GB350S with this exclusively designed single-seat cowl, which covers the passenger section of the seat to highlight sportiness and heritage appearance.

• Crafted from sturdy polycarbonate

• Color: Mat Axis Gray Metallic

Note: Cannot be installed simultaneously with saddle and seat bag.

Design Protection

METER VISOR

08R70-K0Z-J21

The Meter Visor is designed to enhance rider comfort, accentuating the street-style of the motorcycle headlight area while deflecting traveling air around the chest.

• Constructed from durable polycarbonate

• 260mm on width, 155 height and 3,2mm thickness

Note: Cannot be installed simultaneously with a genuine long visor or headlight cowl.

GRIP ENDS

08F79-K0Z-D10

Designed for excellent strength and corrosion resistance, these grip ends come with a unique mounting bolt, adding a stylish touch to the handle area.

• Made of machined aluminium

Note: Cannot be installed simultaneously with grip heaters and knuckle guards.

HEADLIGHT COWL

08F81-K0Z-D10ZC

The Headlight Cowl provides both rider comfort by deflecting air and a sporty touch to the front.

• Crafted from sturdy polycarbonate

• Color: Mat Axis Gray Metallic

Note: Cannot be installed simultaneously with meter visor or long visor.

ENGINE UPPER PIPE

08F70-K0Z-D00ZA

Crafted with a robust 28.6mm extra-thick steel pipe, the engine upper pipe enhances the cruiser's bold aesthetic.

• Finished in mat black paint

• Dimensions in mm (W x H): 508 x 260

Note: While it exudes strength, it is not designed as a fall protection engine guard and cannot be used simultaneously with an external engine guard.

SIDE TANK PADS

08P70-K0Z-D10

The Side Tank Pads add protection to the fuel tank and improve riders' control thanks to the enhanced knee grip.

• Made from high-quality rubber

• Weather resistance

• Perfect fit

Comfort Luggage

LEFT SADDLE BAG

08ESY-K0Z-LSB

This practical 14L left saddlebag is a must-have weather it's for everyday commuting or touring. The attachment system allows quick and convenient detachment from the motorcycle, and its shoulder strap will allow it to be easily carried.

• Dimensions in mm (W x H x D): 320 x 325 x 139

• Capacity: 14 liters

• Allowable cargo load: 3.0 kg

• Waterproof inner bag included

• Easy to carry thanks to a convenient shoulder strap

• Three-point adapter included in the kit

REAR SEAT BAG

08ESY-K0Z-RSB

A simple and functional rear bag specifically adapted to the tapered shape of the rear seat.

• Easy attachment system included provides stable mounting

• Bag capacity of 15L which can be expanded to 22L

• Rain cover included

• Dimensions in mm (W x L x H): 178 x 285 x 130

• Material: 100% polyester

• Color: Black

RIGHT SADDLE BAG

08ESY-K0Z-SSB

This practical 10L right saddlebag is a must-have weather it's for everyday commuting or touring. The attachment system allows quick and convenient detachment from the motorcycle, and its shoulder strap will allow it to be easily carried.

• Dimensions in mm (W x H x D): 225 x 320 x 139

• Capacity: 10 liters

• Allowable cargo load: 1.0 kg

• Waterproof inner bag included

• Easy to carry thanks to a convenient shoulder strap

• Three-point adapter included in the kit

USB CHARGER

08U00-K0Z-E00

Convenient Type-C connector for hassle-free front and back insertion, automatically optimizing power supply for connected devices. Genuine meter horizontal mount for easy use.

HEATED GRIPS

08ESY-K0Z-GH

Extremely slim heated grips controlled by a simple operation of the seamlessly integrated handle switch designed to increase riders' comfort while riding under cold weather.

• 5 heating levels

• Easy to grip (same thickness as standard grips)

• Integrated circuit prevents the battery from draining

• Memory function recalls the last setting after switching the motorcycle back on

LONG VISOR

08R72-K0Z-D10

The Long Visor is designed to enhance rider comfort, reducing wind and rain exposure.

• Constructed from durable polycarbonate

• 320mm in width, 355mm in height and 3,2mm thickness

Note: Cannot be installed simultaneously with the meter visor and headlight cowl.

KNUCKLE GUARDS

08P73-K0Z-D10ZB

Enhance the GB350S' ride comfort with these specially designed Knuckle Guards, minimizing wind and rain impact on your fists.

• Made form rigid polypropylene

• Color black

• Set includes left and right

• Sized at 112mm in height and 228mm in width.

Note: Cannot be installed simultaneously with grip ends or grip heaters.

FOG LIGHTS

08ESY-K0Z-FL

Set of 2 additional front Led headlights that will increase the visibility for the riders and make them more noticeable for the surrounding traffic. The LED Fog Lights increases visibility during poor weather conditions with strong brightness despite low energy consumption.

Attachment 08V79-K3R-D00 included.

The kit contains:

• Fog light engine Pipe Attachment (08V79-K3R-D00)

• Front Fog Light (08V80-K3R-D00)

Note: Engine Upper Pipe (08F70-K0Z-D00ZA) is required for the installation.

ACCESSORIES NT1100

Welcome to the new touring era

Honda have long held a reputation for making dynamic, practical and versatile tourers. Icons like the Pan European and Deauville generated a loyal customer following by offering genuine country-crossing appeal in an exciting package.

The 2022 NT1100 continues this tradition. With its blend of sporty performance, all-day comfort and rich specification list, heralding a New Touring Era, the NT1100 is a machine that can just as easily take you across the country as take you to work.

50l Manual Top Box

Top Box Inner Bag (25l)

Key System Inner Cylinder (Wave Key)

Front Fog Lights Attachment

Front Fog Lights

4,5l Tank Bag

Comfort Pillion Steps

Comfort Pillion Seat

Top Box Pad Black Cushion Red

Comfort Rider Seat

Panel Top Box Gunmet Black Metallic

Panel Top Box Pearl Hawkseye Blue

Panel Top Box Mat Warm Ash Metallic

Alarm Attachment

Alarm System

Security Buzzer

Top Box Pad Black Cushion Black

Top Box Inner Bag

50l Top Box Rubber Pad

Decorative Stripes (Nhc52m/Pb409p9)

Decorative Stripes (Yr386m)

Top Box Backrest

Parking Lever

Parking Lever Cover

38l Top Box

Top Box Lock

Inner Bag For 38l Top Box

Aluminium Panels Attachment

Panel R/L Pannier(Al)

Panel Top Box (Al)

3l Tank Bag

Key System Body Part

Quick Shifter

3L TANK BAG

08L89-MKS-E00

This light and compact Black Tank Bag has a clear pocket and, making it convenient for storing small accessories. It has been specially designed to not interfere with the handlebars when steering. Installation, combining a one-touch buckle and magnet, achieves both reliable fixation and simple removal.

• Colour: Black

• Capacity: 3L

• Material: Polyester

• Maximum load weight: 1,5 kg

Luggage

50L TOP BOX WITH PAD AND BLACK CUSHION

08ESY-MLF-TBBAS / 08ESY-MLF-TBBB2 / 08ESY-MLF-TBBLB

50L Top Box that can store up to two full size helmets in. The built-in key cylinder can be used to lock the top box even when is removed from the carrier.

This kit includes:

• 50L Manual Top Box (08L73-MKT-D00)

• Panel Top Box *PB409P* Blue (08L82-MKT-D00ZQ)

• Top box Pad cushion Black ( 08R74-MLF-E00ZA)

• Key system inner cylinder (WAVE KEY) (08M70-MJE-D03)

• 08ESY-MLF-TBBAS 50L Top Box in Mat Warm Ash Metallic with Black Cushion Kit

• 08ESY-MLF-TBBB2 50L Top Box in Gunmetal Black Metallic with Black Cushion Kit

• 08ESY-MLF-TBBLB 50L Top Box in Pearl Hawkseye Blue with Black Cushion Kit

38L TOP BOX

08L71-MJP-G50

The 38L Top Box is suitable for one helmet. The Honda one key system operates the top box with the motorcycle ignition key. Maximum load capacity: 6kg

Note: Rear Carrier support, Top Box lock and Key System inner Cylinder are sold separately.

TOP BOX BACKREST

08F00-MJP-G50

Designed to match the 38L Top Box, this backrest is made of polyurethane foam to improve the passenger comfort. Easy fitment with no drilling required.

Note: Top Box 38L is not included.

50L TOP BOX WITH PAD AND RED CUSHION

08ESY-MLF-TBBR2 / 08ESY-MLF-TBRAS/ 08ESYMLF-TBRB

50L Top Box that can store up to two full size helmets in. The built-in key cylinder can be used to lock the top box even when is removed from the carrier with the motorcycle's own ignition key. This kit includes:

• 50L Manual Top Box (08L73-MKT-D00)

• Panel Top Box *YR386M* Mat. Warm Ash Metallic (08L82-MKT-D00ZP)

• Top Box Pad Cushion Black-Red 8R74-MLF-E00ZB)

• Key system inner cylinder (WAVE KEY) (08M70-MJE-D03)

• 08ESY-MLF-TBBR2 50L Top Box in Gunmetal Black Metallic with Red Cushion Kit

• 08ESY-MLF-TBRAS 50L Top Box in Mat Warm Ash Metallic with Red Cushion Kit

• 08ESY-MLF-TBRB 50L Top Box in Pearl Hawkseye Blue with Red Cushion Kit

TOP BOX INNER BAG (25L)

08L77-MKT-D00

Top Box inner bag providing a 25L storage capacity and easy to carry thanks to its shoulder strap. Featuring Honda Logo.

PRODUCT DETAILS

• Material: Polyester PVC

ALUMINIUM PANELS FOR PANNIERS SET

08L80-MKT-D00

Set of 2 Aluminium Panels to complement the design of the panniers will adding an extra touch of adventure.

ALUMINIUM PANELS ATTACHMENT

08L76-MLF-E00

Set of hardware required to install the Aluminium Panels for Pannier Set.

08L83-MKT-D00

Aluminium

08L75-MJP-G51

• Colour: Black INNER BAG FOR 38L TOP BOX

Black nylon bag with embroidered silver Honda wing logo on the top and red zippers. Comes with adjustable shoulder belt and carrying handle.

TOP

08L81-MKS-E00

Made of a robust fabric, this waterproof inner bag comes with 2 shoulder belts and a carrying handle. Presenting a reflective signage and a Honda Logo, this large inner bag can be loaded directly onto your bike.

• Fabric: Tarpaulin 250D PVC

• Colour: Black

• Dimensions (L x W x H in mm): 310 x 480 x 200

BOX INNER BAG
ALUMINIUM PANEL TOP BOX
panel for the 50L Top Box that enhances the toughness appearance of the motorcycle and complements the box design (Top Box not included).

Comfort & Security

FOG LIGHT KIT

08ESY-MLF-FLS

Set of 2 additional front led lights that increase the riders' visibility during adverse weather conditions while they make them more noticeable for the surrounding traffic.

This kit includes:

• Front Led Fog Lights Attachment (08V80-K3R-D00)

• Front Led Fog Lights (08V70-MLF-E80)

COMFORTABLE PILLION STEPS

08R71-MJP-G50

Optional pillion footpegs made of aluminium with a thicker rubber pad, wider than the standard pegs for increased comfort and reduced vibrations.

COMFORT PILLION SEAT

08R73-MLF-E00ZA

Thanks to its softer construction and its increased 15mm thickness, this pillion seat provides an extra level of comfort enhancing the riding experience.

COMFORT RIDER SEAT

08R75-MLF-E00ZA

Thanks to its softer construction and padding, this accessory seat provides an extra level of comfort and enhances the riding experience without increasing its height.

ALARM KIT

08ESY-MLF-ALS

This Alarm system is specially designed for the motorcycle's protection, offering a higher level of antitheft security. It's functioning is operated and indicated through the motorcycle's handle switch and TFT display. Included remote allows operation within the working range. This easy kit includes:

• Alarm System (08E71-MKT-D70)

• Security Buzzer (08E73-MKT-D70)

• Alarm Attachment (08E70-MLF-E80)

Performance & Design

QUICK SHIFTER

08U70-MLF-E00

Only applicable to manual transmission versions of the NT1100, the quick shifter enables smooth but instanteneous clutchless gear shifts, both up and down. For an increased comfort and added sportiness of the riding experience.

PARKING LEVER

08F70-MKT-D00

With the same black anodized treatment as the cover, this Aluminium Parking Lever adds a design and sophistication touch to the cockpit of the motorcycle.

PARKING LEVER COVER

08F72-MKT-D00

With its black anodized treatment and the inclusion of the Honda logo, this Aluminum Parking Lever Cover elevates your bike's aesthetics, adding an exclusive and stylish touch to its design.

DECORATIVE STRIPES

0R24M-SAD-023ZA / 0R24M-SAD-023ZB

Set of decorative stripes that enhance the visual appearance of the NT1100, adding a touch of sportiness and depth to the colour palette. The set includes stickers for the fairings, wheels and panniers. Recommended application for Mat Warm Ash Metallic motorcycle colour.

This product is a customized part.

• 0R24M-SAD-023ZA Decorative Stripes (NHC52M/ PB409P9)

• 0R24M-SAD-023ZB Decorative Stripes (YR386M)

CUSTOMIZED

ACCESSORIES FORZA 750

Must Have

CONSOLE BAG

08L79-MKT-D00

Exclusive design that fits perfectly in the space between your knees. With a front slot to feed through electronic wires, the Console Bag is the perfect solution to carry your essential items.

• Color: Black

• Capacity: 9L

• Load weight: 2Kg

• Material: Polyester Note: Rain cover included.

Accessories Packs

Luggage

SMART TOP BOX KIT

08ESY-MKT-TB50S

50L Top Box with Honda SMART Key system allowing to open the lid without taking the key out the pocket. Can hold two helmets in. The built-in key cylinder can be used to lock the top box even when is removed from the carrier. A backrest is included to improve the passenger comfort.

• Dimensions: L 470 mm x W 600 mm x H 340 mm

• Maximum load capacity: 6 kg

• Colour: Black

Note: Rear carrier not included Available Top Box colour panels:

• Warm Ash Metallic 08L82-MKT-D00ZP

• Mat Ballistic Black Metallic 08L82-MKT-D00ZN

• Iridium Gray Metallic 08L82-MKT-D00ZM

PANNIERS INNER BAGS

08L78-MKT-D00

Set of 2 inner bags matching the shape of the pannier's new design. Available in black with a discrete Honda signature, these inner bags come with a shoulder strap for easy carry.

PANEL R/L PANNIER(AL)

08L80-MKT-D00

Set of 2 Aluminium Panels to complement the design of the panniers by adding an extra touch of adventure.

• Material: Aluminium

• Featuring Honda logos

• Left and right set

TOP BOX INNER BAG (25L)

08L77-MKT-D00

Top Box inner bag providing a 25L storage capacity and easy to carry thanks to its shoulder strap. Featuring Honda Logo.

PANEL TOP BOX (AL)

08L83-MKT-D00

Aluminium panel for the 50L Top Box that enhances the toughness appearance of the motorcycle and complements the box design.

Note: Smart or Manual 50L Top Box are not icluded.

REAR CARRIER

08L74-MKT-D00ZC

Aluminium Rear Carrier required for the installation of all available Top Boxes. It's design features handle grips for added passenger comfort.

Maximum load capacity: 10kg

TOP BOX CUSHION RED/BLACK

08R74-MLF-E00ZA / 08R74-MLF-E00ZB

Designed to match the 50L Top Box, this backrest is made to enhance the passenger comfort and reduce the fatigue in long rides and journeys.

Recommended application with standard seat.

• Top Box Pad Black Cushion Black

08R74-MLF-E00ZA

• Top Box Pad Black Cushion Red 08R74-MLF-E00ZB

50L MANUAL TOP BOX

08L73-MKT-D00

50L Top Box that can hold two helmets in. The builtin key cylinder can be used to lock the top box even when is removed from the carrier. Must be mounted with a rear carrier and the Top Box Rubber Pad (sold separately)

• Dimensions: L 470 mmx W 600 mmx H 340 mm

• Maximum load capacity: 6 kg

• Colour: Black

Note: Rear carrier, Top box rubber pad, Key system inner cylinder (Wave Key) are not included.

TOP BOX INNER BAG

08L81-MKS-E00

Made of a robust fabric, this waterproof inner bag comes with 2 shoulder belts and a carrying handle. Presenting a reflective signage and a Honda Logo, this large inner bag can be loaded directly onto your bike.

• Fabric: Tarpaulin 250D PVC

• Colour: Black

• Dimensions (L x W x H in mm): 310mm x 480mm x 200mm

PANNIER SET & STAY KIT

08ESY-MKV-PNS

Set of 2 panniers matching the motorcycle body design.The "Honda one key system" allows to open and close the panniers by using the key of the scooter.

This pack contains:

• Pannier Case(R26,L33) (08L70-MKT-D70)

• Pannier Supor Stay (08L73-MKV-D00)

• Key System inner cylinder x2 (WAVE KEY) (08M70-MJE-D03)

Matching colour panel not included, see available colours below:

• Mat. Warm Ash Metallic 08L81-MKT-D00ZS

• Mat Ballistic Black Metallic 08L81-MKT-D00ZR

• Iridium Gray Metallic 08L81-MKT-D00ZQ

LUGGAGE DIVIDER

08L71-MKT-D70

The lugagge divider has been designed to enhance practicality during daily commuting or while travelling, thanks to its modular compartments and perfect fitment under the seat.

• Material: Polyester PVC

• Color: Black with red zippers.

• Easy to carry thanks to the carrying handle

• Featrues the Honda logo

Design

PARKING LEVER COVER

08F72-MKT-D00

With its anodised black treatment, it enhances the appereance of the motorcycle maintining operatibility and parking parking performance.

• Anodised black treatment

• Honda logo engraved by laser

• Replaces standard part

PARKING LEVER

08F70-MKT-D00

It enhances the appereance of the motorcycle mantaining operatibility and parking performance.

• Made of an alluminium alloy

• Two tone finish with aluminum base color by machining after anodizing

• Replaces standard part

Comfort, Security & Performance

MUFFLER AKRAPOVIC

0R24M-SMU-026

Expertly designed and constructed using race-proven materials, the Slip-on Line (Titanium) exhaust for the Forza 750 offers a high-grade titanium muffler outer sleeve over a stainless-steel muffler inner structure and a stainless-steel link pipe. It is finished with a handmade carbon-fibre end cap and heatshield for an impressively sporty look, perfectly in keeping with the lines of this machine.

FOG LIGHTS KIT

08ESY-MKV-FLS

Set of 2 additional front led lights that increase the riders' visibility during adverse weather conditions while they make them more noticeable for the surrounding traffic.

• Operated through an integrated handle switch

This kit includes:

• Fog Light (08V80-K3R-D00)

• Fog Light Attachment (08V70-MKV-D50

DEFLECTOR

08R70-MKV-D50

The deflector set enhances rider comfort by reducing airflow around the waist and lower body.

COMFORT SEAT *BLACK*

08R71-MKT-D70ZA

Thanks to its softer construction and its increased 10mm thickness, this rider seat provides an extra level of comfort, enhancing the riding experience.

• Material: PVC leather / soft urethane / PP bottom

• Red contrasting double-stitching

• Lumbar support is increased for the rider

• Features the Honda logo

• Two-tone leather finish

LATERAL COVERS

08F71-MKV-D00

Stainless steel covers protecting the body parts from kick damages and improving the quality feel of your bike.

• Material: Stainless steel

• Surface treatment: Shot blasting surf

FLOOR PANEL

08P70-MKV-D00

A set of left and right stainless-steel floor panels, featuring the FORZA logo with anti-slip pads that will add a touch of elegance to your scooter.

• Material: Stainless/Rubber

GRIP HEATER

08T70-MKT-D70

This set of heated grips provide 360° efficient heating for the rider's hands in cold weather. It features adjustable heat levels, smart heat allocation, and is ntegrated seamlessly with the bike's design.

• 5 level temperature adjustment

• Easy grip due to the same thickness as standard grips

• Built-in voltage monitoring system prevents the battery from draining

• Memory function

• Operated through the MC handle switch and displayed on the TFT display.

ALARM KIT

08ESY-MKT-ALS

This Alarm system is specially designed for the motorcycle's protection, offering a higher level of antitheft security.

This pack contains:

• Alarm System (08E71-MKT-D70)

• Security Buzzer (08E73-MKT-D70)

• Alarm attachment (08E70-MKT-D70)

PASSENGER BACKREST

0R24M-MSE-009

This high quality backrest improves the passenger comfort while keeping a sporty look. Not compatible with the rear carrier, wich is necessary to install both the top box and the side panniers. This product is a customized part.

CUSTOMIZED PART

ACCESSORIES FORZA 350

Must Have

45L SMART TOP BOX KIT

08ESY-K40-TP22ZG / 08ESY-K40-TP22ZH / 08ESY-K1B-TB45ZG / 08ESY-K40-TP22ZJ / 08ESY-K40-TP22ZM

Kit containing the 45L Smart-Key Top Box and all the components required for its installation:

Electronic Lid opener, Backrest, Design panel and Rear Carrier.

This top box can easily store 2 helmets. Maximum load capacity: 10kg

5 colours available:

• Pearl Nightstar Black - 08ESY-K40-TP22ZG

• Matte Pearl Pacific Blue - 08ESY-K40-TP22ZH

• Matte Pearl Cool White - 08ESY-K1B-TB45ZG

• Pearl Falcon Gray - 08ESY-K40-TP22ZJ

• Matte Cynos Gray Metallic - 08ESY-K40-TP22ZM

Accessories Packs

Floor Panel

Special Edition Seat

Backrest *NH1L*

ATT

Grip Cement

Grip Heaters Attachment

Grip Heaters

Security Buzzer

Wheel Stripe Gold

Wheel Stripe Candy Graceful Red

Wheel Stripe Sahara Blue Metallic

Inner Bag For 35L Top Box

Smart Top Box Lid Opener

Rear Carrier Mat Axis Gray Metallic

35L Top Box Matte Cynos Gray Metallic

35L Top Box *NH-B44P* Matte Pearl Cool White

35L Top Box *NH-A84P* Pearl Nightstar Black

35L Top Box Pearls Falcon Gray

35L Top Box *R296m* Carnerlian Red Metallic

Rear Carrier Smart Mat Axis Grey Metallic

45L Smart Top Box Matte Black

Top Box Cover Matte Cynos Gray Metallic

Top Box Cover *NH-B44P* Matte Pearl Cool White

Top Box Cover *NH-A84P* Pearl Nightstar Black

Top Box Cover Pearls Falcon Gray

Top Box Cover A *R296M*

Top Box Backrest

U-Lock 120/340

Outdoor Cycle Cover Xl

Luggage Design

45L SMART TOP BOX KIT

08ESY-K1B-STSB/ 08ESY-K1B-STSG/ 08ESY-K1BSTSPG/ 08ESY-K1B-STSR/ 08ESY-K1B-STSW

This kit contains all the necessary accessories to install the Smart Top Box matching the bike colour.

This 45L top box can store two full face helmet with maximum load capacity of 5kg.

• 08ESY-K1B-STSB PEARL NIGHTSTAR BLACK

• 08ESY-K1B-STSG MAT CYNOS GRAY METALLIC

• 08ESY-K1B-STSPG PEARL FALCONY GRAY

• 08ESY-K1B-STSR CARNELIAN RED METALLIC

• 08ESY-K1B-STSW MAT PEARL COOL WHITE

Comfort

SPECIAL SEAT

08R70-K1B-D70

Thanks to its softer construction, this seat provides an extra level of comfort enhancing your riding experience, while adding a touch of sportiness thanks to it's black and grey design with contrasting red stitching.

35L TOP BOX KIT

08L70-K40-F30ZA/ 08L70-K40-F30ZD/

08L70-K40-F30ZH/ 08L70-K40-F30ZK/

08L70-K40-F30ZQ

35L Top Box suitable for one helmet with Comfort Pad and Key system. Maximum load capacity: 10 kg. Rear Carrier sold separately.

Available in the following colours:

• Mat Cynos Grey Metallic - 08L70-K40-F30ZA

• Pearl Falcon Grey - 08L70-K40-F30ZK

• Pearl Nightstar Black - 08L70-K40-F30ZH

• Mat Pearl Cool White - 08L70-K40-F30ZD

• Carnerlian Red Metallic - 08L70K40F30ZQ

INNER BAG FOR 35L TOP BOX

08L09-MGS-D30

Black nylon bag with embroidered silver Honda wing logo on the top, with red zippers.

• Expandable from 15 to 25L

• Comes with adjustable shoulder belt and carrying handles.

REAR CARRIER

08L70-K40-F00

Rear Carrier with grips that improve the passenger comfort and ease the handling. Suitable for all sizes of top boxes.

Material: Aluminium

Colour: Mat Axis Gray Metallic Maximum load capacity: 10 kg

REAR CARRIER SMART

08L74-K40-F70

Rear Carrier with grips that improve the passenger comfort and ease the handling. It is the required Rear Carrier which should be assembled to install a Smart Top Box.

Material: Aluminium

Colour: Mat Axis Gray Metallic

Maximum load capacity: 10 kg

WHEEL STRIPES

08F76-K40-F01ZM / 08F76-K40-F01ZN/ 08F76K40-F01ZP

Customize your motorcycle with this easy to apply wheel stripes kit. Contains 3 strips per wheel side for easy application and a perfect fit on both wheels.

Available in 3 colours:

• Gold (08F76-K40-F01ZM)

• Candy Graceful Red (08F76-K40-F01ZN)

• Sahara Blue Metallic (08F76-K40-F01ZP)

Protection & Security

BACK REST KIT

08ESY-K1B-BRS

This high quality backrest improves the passenger comfort while keeping a sporty look. This product is a customized part..

This kit includes:

• Backrest Attachment (08R73-K1B-DC0)

• Backrest (08R72-K1B-DC0ZA)

GRIP HEATERS KIT

08ESY-K2A-HG23

Extremely slim heated grips with integrated control to maximize the rider comfort. Feature 3 variable heating levels and an integrated circuit to protect the battery from draining.

Kit containing the Grip Heaters, the Attachement and Honda High-Temperature cement.

OUTDOOR

CYCLE COVER XL

08P34-BC3-801

Protects paintwork against U.V. rays. Water-resistant breathable fabric that allows the bike to dry while covered.

Rope to tighten the cover to avoid fluttering. Two holes in front lower area for easy introduction of U-lock.

U-LOCK 120/340

08M53-KAZ-800

High security U-shaped lock made of hardened special steel. Anti-drill and anti-pick disc lock. The dimensions of this lock are 120-340. Can be carried easily in the compartment located under the seat.

SECURITY BUZZER

08E73-MKT-D70

Buzzer designed to complement the alarm functioning.

FLOOR PANEL

08F70-K1B-D60

A set of left and right stainless steel floor panels with anti-slip pads that will add a touch of elegance and sportiness to the Forza.

ACCESSORIES FORZA 125

Accessories Packs

Panel

Edition Seat

Backrest *NH1L*

ATT

Buzzer

Grip Heaters Attachment

Grip Heaters

Hand Grip Cement

Wheel Stripe Gold

Wheel Stripe Candy Graceful Red

Wheel Stripe Sahara Blue Metallic

Inner Bag For 35l Top Box

Smart Top Box Lid Opener

Rear Carrier Mat Axis Gray Metallic

35L Top Box Matte Cynos Gray Metallic

35L Top Box *NH-B44P* Matte Pearl Cool White

35L Top Box Matte Pearl Pacific Blue

35L Top Box Pearls Falcon Gray

Rear Carrier Smart Mat Axis Grey Metallic

45L Smart Top Box Matte Black

Top Box Cover Matte Cynos Gray Metallic

Top Box Cover Matte Pearl Cool White

Top Box Cover Matte Pearl Pacific Blue

Top Box Cover Pearls Falcon Gray

Top Box Backrest

U-Lock 120/340

Outdoor Cycle Cover XL

Luggage

45L SMART TOP BOX KIT

08ESY-K40-STSW / 08ESY-K40-TP22ZD/ 08ESY-K40-TP22ZE/ 08ESY-K40-TP22ZF

This kit contains all the necessary accessories to install the Smart Top Box matching with the bike colour. This 45L top box can store two full face helmet with maximum load capacity of 5kg.

• 08ESY-K40-STSW Mat Pearl Cool White

• 08ESY-K40-TP22ZD Mat Pearl Pacific Blue

• 08ESY-K40-TP22ZE Pearl Falcon Gray

• 08ESY-K40-TP22ZF Cynos Gray Metallic

35L TOP BOX

08L70-K40-F30ZA / 08L70-K40-F30ZD / 08L70-K40-F30ZJ / 08L70-K40-F30ZK

35L Top Box Matte Pearl Cool White suitable for one helmet with Comfort Pad and Key system. Maximum load capacity: 10 kg. Rear Carrier sold separately. Available in the following colours:

• 08L70-K40-F30ZA Mat Cynos Grey Metallic

•08L70-K40-F30ZK Pearl Falcon Grey

• 08L70-K40-F30ZJ Pearl Pacific Blue

•08L70-K40-F30ZD Mat Pearl Cool White

REAR CARRIER SMART

08L74-K40-F70

Rear Carrier with grips that improve the passenger comfort and ease the handling. It is the required Rear Carrier which should be assembled to install a Smart Top Box.

Material: Aluminium

Colour: Mat Axis Gray Metallic Maximum load capacity: 10 kg

REAR CARRIER

08L70-K40-F00

Rear Carrier with grips that improve the passenger comfort and ease the handling. Suitable for all sizes of top boxes.

Material: Aluminium

Colour: Mat Axis Gray Metallic Maximum load capacity: 10 kg

Comfort

BACK REST KIT

08ESY-K1B-BRS

This high quality backrest improves the passenger comfort while keeping a sporty look. This product is a customized part..

This kit includes:

• Backrest Attachment (08R73-K1B-DC0)

• Backrest (08R72-K1B-DC0ZA)

SPECIAL SEAT*

08R70-K1B-D70

Thanks to its softer construction, this seat provides an extra level of comfort enhancing your riding experience, while adding a touch of sportiness thanks to it's black and grey design with contrasting red stitching.

GRIP HEATERS KIT

08ESY-K2A-HG23

Extremely slim heated grips with integrated control to maximize the rider comfort. Feature 3 variable heating levels and an integrated circuit to protect the battery from draining.

Kit containing the Grip Heaters, the Attachement and Honda High-Temperature cement.

Other

INNER BAG FOR 35L TOP BOX

08L09-MGS-D30

Black nylon bag with embroidered silver Honda wing logo on the top, with red zippers. Expandable from 15 to 25L. Comes with adjustable shoulder belt and carrying handles.

WHEEL STRIPES

08F76-K40-F01ZM / 08F76-K40-F01ZN / 08F76-K40-F01ZP

Customize your motorcycle with this easy to apply wheel stripes kit.

Contains 3 strips per wheel side for easy application and a perfect fit on both wheels.

Available in 3 colours:

• Gold (08F76-K40-F01ZM)

• Candy Graceful Red (08F76-K40-F01ZN)

• Sahara Blue Metallic (08F76-K40-F01ZP)

FLOOR PANEL*

08F70-K1B-D60

A set of left and right stainless steel floor panels with anti-slip pads that will add a touch of elegance and sportiness to the Forza.

OUTDOOR CYCLE COVER XL

08P34-BC3-801

Protects paintwork against U.V. rays. Water-resistant breathable fabric that allows the bike to dry while covered.

Rope to tighten the cover to avoid fluttering. Two holes in front lower area for easy introduction of U-lock.

U-LOCK 120/340

08M53-KAZ-800

High security U-shaped lock made of hardened special steel. Anti-drill and anti-pick disc lock. The dimensions of this lock are 120-340. Can be carried easily in the compartment located under the seat.

SECURITY BUZZER

08E73-MKT-D70

Buzzer designed to complement the alarm functioning.

ACCESSORIES

Refer to page 20 for X-ADV accessories.

ACCESSORIES ADV 350

Accessories Packs

SMART TOP BOX KIT

08ESY-K2L-STB

This 50L Top Box kit with the Honda SMART key system is delivered with all necessary accessories to set it up and complete the installation on the motorcycle.

The kit includes:

• Lid Opener (08L70-K2L-D00)

• 50L Smart Top Box (08L70-MKT-D01)

• Rear Carrier (08L74-K40-F70)

• Aluminium Panel Top Box (08L83-MKT-D00)

• 50L Top Box Rubber Pad (08L85-MKT-D00)

CONSOLE BAG

08L70-K2L-DD0

Exclusive design that fits perfectly in the space between your knees. With a front slot to feed through electronic wires, the Console Bag is the perfect solution to carry your essential items.

• Color: Black

• Material: Polyester Note: Rain cover included.

HANDLEBAR HOLDER

08F70-K2L-DD0

Aluminium Handlebar holder that reinforces the premium appearance of the motorcycle.

• Material: Aluminium

• Surface treatment: Anodized + Machined surfaces

• Colour: Black

STAINLESS PLATE

08F74-K2L-DD0

Set of stainless steel covers protecting the body parts from kick damages and improving the quality feel of your bike.

• Material: Stainless steel

• Surface treatment: Shot blasting

BUZZER KIT

08ESY-K2L-BZS

The Buzzer Kit is specially designed for the motorcycle's protection, offering a higher level of anti-theft security. It's functioning is operated and indicated through the motorcycle's handle switch and TFT display. Included remote allows operation within the working range.

U-LOCK 120/340

08M53-KAZ-800

High security U-shaped lock made of hardened special steel. Anti-drill and anti-pick disc lock. The dimensions of this lock are 120-340. Can be carried easily in the compartment located under the seat.

OUTDOOR CYCLE COVER XL

08P34-BC3-801

Protects paintwork against U.V. rays. Water-resistant breathable fabric that allows the bike to dry while covered.

Rope to tighten the cover to avoid fluttering. Two holes in front lower area for easy introduction of U-lock.

Luggage Design Protection

Comfort

FOG LIGHT KIT

08ESY-K2L-FLS

Set of 2 additional front led lights that increase the riders visibility during adverse weather conditions while they make them more noticeable for the surrounding traffic.

COMFORT SEAT

08R70-K2L-DD0

Thanks to its softer constructions, this rider seat provides an extra level of comfort, enhancing the riding experience.

• Material: PVC leather / soft urethane / PP bottom

• Red contrasting double-stitching

• Lumbar support is increased for the rider

• Features the Honda logo

• Two-tone leather finish

GRIP HEATERS KIT

08ESY-K2L-HG22

Slim heated grips that focus on the most cold-sensitive area of the hands. An integrated control unit allows the rider to easily select between five different heating levels. The integrated circuit protects the battery from draining. Attachment included.

LEG DEFLECTOR

08R71-K2L-DD0

This deflector set enhances ride comfort by redirecting travelling air around the rider's body.

• Material: Polycarbonate

• Color: Dark tint

HIGH SCREEN

08R72-K2L-DD0

The High Wind Screen reduces the air pressure felt by the rider around his head and arms. Made of a strong clear polycarbonate, it can be mounted directly in replacement of the standard screen.

• Material: Polycarbonate

• Colour: Clear

FRONT SIDE PIPES

08F73-K2L-DD0

Set of black Side Pipes that protects the motorcycle's fairing as well as providing a mount for the Front Fog Lights. Not included:

• Front Fog Lights (08V80-K3R-D00)

• Front Fog Lights Attachments (08E70-K2L-DD0)

ACCESSORIES SH350i

Accessories Pack

08HME-K1W-URS

Alarm Att

Hand Grip Cement

Security Buzzer

Grip Heaters Attachments

Grip Heaters

Inner Bag For 35l Top Box

Lid Opener

35L Smart Top Box Pearl Red

35L Smart Top Box Blue Metallic

35L Smart Top Box Pearl White

35L Smart Top Box Mat Gray

35L Smart Top Box in Black

35L Smart Key Top Box in Mat Techno Silver Metallic

U-Lock (Typel-Short)

Clear Knuckle Visor Set

Windshield *PB417M*

Windshield *NH1*

Windshield *NHC95P*

Windshield *NHC09M*

Windshield *R414P*

Windshield *NHC70*

Luggage

35L SMART TOP BOX

Elevate your riding experience with the 35L plastic Top Box designed for the SH motorcycle model. It seamlessly matches the SH bodywork in the captivating SILVER METALLIC. This spacious Top Box accommodates one helmet and includes a comfortable backrest pad for the pillion. Conveniently, it can be unlocked without removing the key from your pocket.

• 08L72-K53-DH2YB 35L Smart Top Box Pearl Red

• 08L72-K53-DH2YC 35L Smart Top Box Blue Metallic

• 08L72-K53-DH2YD 35L Smart Top Box Pearl White

• 08L72-K53-DH2YE 35L Smart Top Box Mat Gray

• 08L72-K53-DH2ZK 35L Smart Top Box in Black

• 08L72-K53-DH2ZL 35L Smart Top Box in Mat Techno Silver Metallic

Other

WINDSHIELD

08R70-K1W-DL0ZA / 08R70-K1W-DL0ZB / 08R70-K1W-DL0ZC / 08R70-K1W-DL0ZD / 08R70-K1W-DL0ZE / 08R70-K1W-DL0ZG

The scratch-resistant windscreen offers maximum wind and weather protection for rider and passenger. Its design perfectly matches the SH350i by adopting a colour-matching mounting base

• 08R70-K1W-DL0ZA Windshield Blue Metallic

• 08R70-K1W-DL0ZB Windshield Black

• 08R70-K1W-DL0ZC Windshield Pearl White

• 08R70-K1W-DL0ZD Windshield Mat Techno Silver Metallic

• 08R70-K1W-DL0ZF Windshield SE

35L TOP BOX INNER BAG

08L09-MGS-D30

Black nylon bag with embroidered silver Honda wing logo on the front. Expandable from 15 to 25L. Comes with adjustable shoulder belt and carrying handles.

LID OPENER

08L70-K1W-D00

Lid Opener connected with the Honda SMART Key system allowing the rider to open the SMART TOPBOX LID without taking the key out of the pocket. Fits only an SH Honda Genuine rear carrier and remains discreet when the Top Box is removed.

CLEAR KNUCKLE GUARDS SET

08P70-K0R-D20

Pair of Clear Knuckle Guards perfectly integrated to maximize the rider protection and easy to install thanks to the ready-to-use holes in the bodywork.

ALARM KIT

08ESY-K1W-ALS

This Alarm system is specially designed for the motorcycle's protection, offering a higher level of antitheft security.

GRIP HEATER KIT

08ESY-K53-GRIP

This heated grips kit focus on the most cold-sensitive area of the hands. An integrated control unit allows the rider to easily select one of the variable heating levels. The integrated circuit protects the battery from draining.

U-LOCK L-TYPE

08M53-MEE-800

Tamper-resistant barrel key U-lock.

ACCESSORIES SH125i / SH150i

Must Have

35L SMART TOP BOX

08L71-K0R-A00ZA / 08L71-K0R-A00ZB / 08L71-K0R-A00ZC / 08L71-K0R-A00ZC / 08L72-K53-DH2ZK

Elevate your riding experience with the 35L plastic Top Box designed for the Sh motorcycle model. It seamlessly matches the SH bodywork. This spacious Top Box accommodates one helmet and includes a comfortable backrest pad for the pillion. Conveniently, it can be unlocked without removing the key from your pocket. Lid Opener is not included.

Available in 5 colours for 6 bike colours:

• Matte Pearl Pacific Blue *Pb-397P* (08L71-K0R-A00ZA)

• Pearl Falcon Gray *Nh-C61P* (08L71-K0R-A00ZB)

• Matte Pearl Cool White *Nh-B44P* (08L71-K0R-A00ZC)

• Pearl Nightstar Black *Nh-A84P* (08L71-K0R-A00ZD)

• Mat Coal Black Metallic ((08L71-K0R-A00ZD)

• Black (08L72-K53-DH2ZK)

Accessories

CLEAR WINDSHIELD

08R70-K0R-AA0 / 08R70-K0R-D20ZB / 08R70-K0R-D20ZC

Specifically designed windshield made of a 2.5mm thick heavy-duty polycarbonate. Elegant, resistant and flexible, this windshield guarantees a clear visual field and a great upper body protection for the rider, without impairing the maneuverability of the scooter. Available in 3 colours:

• Clear Wind Shield (08R70-K0R-AA0)

• Windshield For Matte Coal Black Metallic *Nh-C81P* (08R70-K0R-D20ZB)

• Windshield For Matte Pearl Cool White *Nh-B44P* (08R70-K0R-D20ZC)

35L MANUAL TOP BOX

08L70-K0R-A00ZA / 08L70-K0R-A00ZB / 08L70-K0R-A00ZC / 08L70-K0RA00ZD / 08L70-K77-D01ZQ

Enhance your riding experience with the Sh motorcycle model's 35L plastic Top Box, skillfully painted to seamlessly match the SH bodywork. This spacious Top Box accommodates a single helmet and incorporates a padded backrest, ensuring optimum pillion comfort. Elevate your motorcycle journey with style and convenience. Available in 5 colours for 6 bike colours:

• Matte Pearl Pacific Blue *Pb-397P* (08L70-K0R-A00ZA)

• Pearl Falcon Gray *Nh-C61P* (08L70-K0R-A00ZB)

• Matte Pearl Cool White *Nh-B44P* (08L70-K0R-A00ZC)

• Pearl Nightstar Black *Nh-A84P* (08L70-K0R-A00ZD)

• Black *Nh-1* (08L70-K77-D01ZQ)

CLEAR KNUCKLE GUARDS SET

08P70-K0R-D20

Pair of clear Knuckle Guards perfectly integrated to maximize the rider protection and easy to install thanks to the ready-to-use holes of the bodywork.

35L TOP BOX INNER BAG

08L09-MGS-D30

Black nylon bag with embroidered silver Honda wing logo on the front. Expandable from 15 to 25L. Comes with adjustable shoulder belt and carrying handles.

OUTDOOR CYCLE COVER

08P34-BC3-8010

Protects paintwork against U.V. rays. Waterresistant breathable fabric that allows the bike to dry while covered. Rope to tighten the cover to avoid fluttering. Two holes in front lower area for easy introduction of U-lock.

ACCESSORIES SH MODE

35L TOP BOX 08ESY-K1N-35TB

This 35L Top Box kit can store one full-face helmet, with a lid painted in Matte Cynos Grey. Is delivered with all necessary accessories to set it up and complete installation on the bike.

Luggage

ACCESSORIES PCX125

Must Have

35L SMART TOP BOX

08ESY-K1Z-TB21

The 35L Smart Top Box kit with the Honda Smart Key system allows to open the lid without taking the key out the pocket. Can hold one helmet in. The built-in key cylinder can be used to lock the top box even when is removed from the carrier.

This kit contains the following accessories:

• Smart Top Box Base

• 35L Smart Top Box

• Lid Opener

Accessories

35L TOP BOX KIT

08ESY-K1Z-35TB

35-litres plastic Top Box with a backrest that can store 1 helmet.

Top box base and key system included.

WINDSHIELD

08R71-K1Y-DC0

The accessory Windshield for PCX125 is designed to deflect traveling air away from the rider's body, improving ride comfort for everyday commuting throughout the year, especially during cold and rainy days. Its designed to enhance both the aesthetics and functionality of the bike.

GRIP HEATER KIT

08ESY-K1Y-GHS

The grip heater warms up the right and left grips of the handlebar for comfortable riding on a cold day. The grip heater switch is located on the right handlebar pipe.

This pack contains:

• Grip Heater Att. (08E70-K1Y-DC0) • Grip Heater (08T71-K1Z-J10)

Accessories Pack

08HME-K1Y-WIS

OUTDOOR CYCLE COVER

08P34-BC2-801

This Outdoor Cycle Cover protects the paintwork against U.V. rays. Its water-resistant breathable fabric allows the bike to dry while covered. Equipped with a rope to avoid fluttering, this cover features 2 ring holes in front to easily operate a U-lock.

SECURITY BUZZER

08E73-MKT-D70

Buzzer designed to complement the alarm functioning.

ACCESSORIES CUV e:

Comfort

KNUCKLE VISOR

08R71-K3N-D00

Pair of clear Knuckle Visors perfectly integrated to the scooter design to maximize the rider protection. These elegant Knuckle Visors can be easily installed to the ready-to-use holes of the bodywork.

Design

35L SMART TOP BOX KIT

08ESY-K3N-STBS35

35L Top Box with Honda SMART Key system allowing to open the lid without taking the key out the pocket. Can hold one helmet in.

This pack contains:

• 35L Smart Top Box (08L72-K1Z-J12)

• Lid Opener (08L70-K3N-D00)

WINDSHIELD

08R70

The scratch-resistant windscreen offers maximum wind and weather protection for rider and passenger.

Security

ALARM ATTACHMENT3

08E70-K3N-D00

Attachment required for installing the Alarm System onto the bike..

SECURITY BUZZER

08E73-MKT-D70

Buzzer designed to complement the alarm functioning.

45L SMART TOP BOX KIT

08ESY-K3N-STBS45

Enhance motorcycle experience with the stylish and functional 45L Top Box for the smart key topbox.

This pack contains:

• 45L Smart Top Box (08L70-K40-F71ZC)

• Lid Opener (08L70-K3N-D00)

• Top Box Cover A (08L75-K40-F70ZC)

TOP BOX COVER

08L75-K40-F70ZC

Top box cover black for the 45L Top box matching with the colour of the unit.

35L TOP BOX KIT

08ESY-K3N-TBS35

Enhance motorcycle experience with the stylish and functional top box, designed specifically for urban commuting. This accessory provides additional storage without compromising the sleek design of your scooter.

This pack contains:

• 35l Top Box (08L71-K3N-D00ZA)

• Top Box Lock Assembly (08L00-K3N-D00)

ACCESSORIES

Must have

35L TOP BOX 08ESY-GJK-TB

This kit contains all the accessories necessary to assemble the 35L Top Box on your bike.

The optional 35L top box in Matte Cynos Grey Metallic adds secure storage for laptop or weekend bag, with enough room to store a full-face helmet for when you park up. It mounts on a direct fitment rear rack for ease and practicality.

This kit contains the following accessories:

• 35L Top Box (08L71-KZL-861ZA)

• Rear Carrier Base (08L71-MGZ-J01)

• Cylinder Inner Set For Wave Key (08M71-KZL-841)

The Blade that changed how bikes were built.

Aiming to create a high-performance motorcycle that could defeat its own RVF750 in Endurance Road Races, Honda developed an R&D project that led directly to the CBR900RR in 1992. With 128 HP, it was not the most powerful of its time. However, thanks to a dry weight of 185 kg when all rivals were well over 200 kg, the first Fireblade, soon nicknamed “Blade” by the fans, was so easy to control that it seemed to read its rider’s mind.

More than 25 years after, the most powerful and nimble Honda bikes keep carrying the Blade legacy.

The CBR900RR Fireblade that started all.

Accessories Packs

Wheel Stripe Tricolour Set *NH-1*

Filler Cap

Sliders Sets

Sprocket Protector

Pad

High Wind Screen (Smoke)

Rider Special Seat (Alcantara)

Rear Seat Cowl - Red *R380*

Rear Seat Cowl - Black *NHB01*

Shifter

Carbon Rear Hugger

Carbon Under Cowl

Carbon Middle Cowl

Carbon Front Fender

Carbon Winglet

Carbon Airbox Cover

Mark

Indoor Body Cover

Outdoor Cycle Cover

High Wind Screen (Clear)

Design

OIL FILLER CAP

08F72-MKZ-J30

The Oil Filler Cap is expertly crafted from premiumgrade aluminum, ensuring superior quality and precision. It features a vibrant red anodized finish that adds a striking visual element, while the laser-etched HRC logo on both sides of the handgrip enhances its aesthetics. The cap's interior is hollowed out to enhance strength and minimize weight. Additionally, the cap includes a wire-lock hole, commonly found on HRC works machines, making it suitable for circuit riding. With its surface treatment of red anodization, the Oil Filler Cap combines style, functionality, and a touch of racing heritage.

REAR SEAT COWL

08F75-MKR-D10ZA / 08F75-MKR-D10ZB

Make your motorcycle a racing machine look-alike, with this stylish Single Seat Cowl that also reduces the weight by 120 grams. Replacing the pillion seat easily, this seat cowl cannot be used in conjunction with the Seat Bag. Space available below enables to install a GPS logger (GPS operation not guaranteed). Available in the following colours:

• 08F75-MKR-D10ZA - RED *R380*

• 08F75-MKR-D10ZB - BLACK *NHB01*

WHEEL STRIPE TRICOLOUR SET

08F70-MKZ-J30ZA

The Wheel Stripes set not only features the iconic Honda Racing logo but also enhances the overall racing aesthetic of the bike's undercarriage. With a single unit, these stripes can be easily installed on the bike, making it a convenient and versatile accessory. Perfect for enthusiasts looking to elevate the racing appearance of their motorcycle, the Wheel Stripes set adds a touch of style and sportiness to the bike's overall design.

Performance & Maintenance

QUICK SHIFTER

08U73-MKR-D10

The Quick Shifter communicates the shift pedal operations to the ECU that controls fuel injection quantities, throttle levels and ignition timings. In return, the ECU removes the load from the transmission gear and allows up and downshifts without operating the clutch. The Quick Shifter autoblip functionality guarantees smooth and instantaneous down-shifts, contributing to a stress-free experience for both sporty and long-distance riding. For Fireblade RR-R version only.

INDOOR BODY COVER

08M72-MKR-D10

Made of a smooth, stretchable material, the bespoke cut of this black Body Cover fits the Fireblade RR-R perfectly and will protect it from dirt. For indoor use only (not waterproof).

CBR branding displayed on both the cover and its storage bag. (Product may differ from the pictures displayed).

Protection

FRAME SLIDERS SETS

08P71-MKR-D10

Incorporating feedback from the RC213V works machine, these Frame Sliders can be mounted to the engine hanger bolts.

Available in black, this set of left and right frame guards do not guarantee the protection of all motorcycle parts should the motorcycle fall over.

SPROCKET PROTECTOR

08P77-MKR-D10

Preventing objects from getting caught in the sprocket, this heavy-duty cover will not impair the bend of the swingarm. Designed to conform to circuit regulations, it also increases the Racing appearance of the Fireblade RR-R.

TANK PAD

08P82-MKR-D10

Shaped to match the curves of the Fireblade RR-R tank, this Pad protects the paint from scratches. Flexible and sporty with its carbon-pattern material, the Tank Pad features the CBR logo and is available in Black.

Luggage

REAR SEAT BAG

08L72-MKR-D10

This Rear Seat Bag has an adjustable capacity of 15 to 22 litres. It features convenient zipped pockets on each side and a carrying handle. A waterproof inside liner and a rain cover protect your personal items from the elements. Replacing the pillion seat, its base with fasteners keep the bag perfectly attached yet easy to remove, without the hassle of straps or tools.

Load capacity: 4kg.

TANK BAG

08L71-MKR-D10

This Tank Bag can be swiftly attached or removed and will remains firmly secured with its fasteners on the front. Its Honda Genuine design perfectly matches the tank shape to provide a 7 litres capacity without impairing the handling of the Fireblade RR-R. Clear pocket on the top with a slit to route a cable if need be. Zipped pockets on each side, carrying handle and rain cover achieve to make this tank bag the ideal luggage for your Fireblade RR-R.

Load capacity: 2kg.

Comfort

HIGH WIND SCREEN

08R70-MKR-D10ZA / 08R71-MKR-D10ZA

Developed after wind-tunnel and real-life riding sessions, the High Wind Screen combines increased wind protection and improved motorcycle control. Compared to the standard version, the top of the wind screen is 8mm higher and 40mm further forward. Furthermore, as a Genuine Honda design, it is fully WVTA certified. 2 versions available:

• 08R70-MKR-D10ZA: Smoke

• 08R71-MKR-D10ZA: Clear

RIDER SPECIAL SEAT (ALCANTARA)

08R72-MKR-D10

Made of luxury Alcantara material that provides outstanding soft feel and superb breathability, the Rider Special Seat improves the riding comfort. Protected with a water repellent finish, the beautiful matt texture of this seat and the CBR branding increase the premium feel of the Fireblade RR-R.

Available only in Black / Grey with Red stitching.

USB POWER SOCKET

08E72-MKR-D10

Based on a convenient Type-C connector enabling the plug to be inserted in any orientation, this socket determines automatically the optimal charging voltage for connected devices. It comes with a cap preventing dirt or water to enter while not in use. Installation under the pillion seat. Attachment 08E70-MKR-DH0 sold separately.

ACCESSORIES CBR600RR

Supersport supreme

Inline fours are the apex predators of the sportbike world. This is the kind of engine that our World Superbike and Supersport riders race. And if you’ve ever ridden a bike like our CBR600RR it’s easy to see why. The engines are superresponsive and high revving. The handling is scalpel sharp. And our CBR600RR combines all that with the light weight of a 600-class machine—and light weight is the key to all sorts of performance benefits. A rare breed these days, fours like the CBR600RR are a delight for track-day use, and outstanding on twisty back roads.

The CBR600RR in action.

Accessories Packs

SEAT COWL

08F70-MJC-N30ZA / 08F72-MJC-N40ZA

This stylish Single Seat Cowl replaces the pillion seat with an easy operation, creating a strong resemblance to the racing machine and reducing the weight. It cannot be used in conjunction with the Seat Bag. Available in the following colour options:

• 08F70-MJC-N30ZA - RED *R380*

• 08F72-MJC-N40ZA - BLACK *NHA86M*

OIL FILLER CAP

08F72-MKZ-J30

The Oil Filler Cap is expertly crafted from premium-grade aluminum, ensuring superior quality and precision. It features a vibrant red anodized finish that adds a striking visual element, while the laser-etched HRC logo on both sides of the handgrip enhances its aesthetics. The cap's interior is hollowed out to enhance strength and minimize weight. Additionally, the cap includes a wire-lock hole, commonly found on HRC works machines, making it suitable for circuit riding. With its surface treatment of red anodization, the Oil Filler Cap combines style, functionality, and a touch of racing heritage.

WHEEL STRIPE TRICOLOUR SET

08F70-MKZ-J30ZA

The Wheel Stripes set not only features the iconic Honda Racing logo but also enhances the overall racing aesthetic of the bike's undercarriage. With a single unit, these stripes can be easily installed on the bike, making it a convenient and versatile accessory. Perfect for enthusiasts looking to elevate the racing appearance of their motorcycle, the Wheel Stripes set adds a touch of style and sportiness to the bike's overall design.

Luggage

REAR SEAT BAG

08ESY-MKZ-RRSEAT

Functional rear bag specifically adapted to the tapered shape of the rear seat. Capacity of 15L that can be expanded to 22L. Easily attached and perfectly stable when installed with the specific attachment included. Dimensions in mm (W x L x H): 355 X 365 X 243

This kit includes:

• Rear Seat Bag Attachment

• Rear Seat Bag

Protection & Comfort

TANK PAD

08P82-MKR-D10

This rubber-made pad is exclusively designed to fit the tank shape and to protect it from scratches.

GRIP HEATER

08ESY-MKZ-HG

The Grip Heater easy kit is a practical and essential set of accessories that provides heated grips, ensuring riders can maintain a comfortable and firm grip even in chilly weather conditions.

The kit contains:

• Grip Heater Attachment

• Grip Heater

USB POWER SOCKET

08ESY-MKZ-USB

The USB easy kit is a compact and convenient set of accessories designed to equip the bike with USB connectivity, enabling riders to charge devices and stay connected on the go, while stored under the seat. The kit includes:

• USB (TYPE-C) Attachment (08E70-MKZ-U00)

• USB (TYPE-C) (08E72-MKR-D10)

PROTECTIVE FILM

08P70-MKZ-J30

The Protective Film is a thin, transparent, and durable layer applied to the bodywork to prevent damage to the fairings when the Rear Seat Bag is installed. Its primary function is to shield the fairing from scratches, and minor abrasions, preserving the pristine appearance and enhancing the bike's overall longevity.

ACCESSORIES CBR650R

What does HSTC means?

Since 1992 with the ST1100 aka “Pan European” model, Honda equips more and more of its motorcycles with a system called Honda Selectable Torque Control (HSTC). This system monitors constantly the speeds of the front and rear wheels via speed sensors incorporated into the Anti-Lock Braking System (ABS). When the rear wheel begins to rotate significantly faster than the front, the system reduces fuel delivery to the engine and limits rear-wheel slippage. In 2019 with the new CBR650R, Honda applied this technology for the first time to its mid-displacement SuperSport motorcycle. The rider can deactivate it on demand.

Accessories Packs

Protection Performance & Design

TANK PAD

08P82-MKR-D10

This rubber-made pad is exclusively designed to fit the tank shape and to protect it from scratches.

TANK SIDE STICKER

08F72-MKY-E00ZA

These transparent tank side stickers, which feature the CBR logo, add protection to the fuel tank againts scratches and rubbing, while their flexible sheet material makes them easy to install on the tank surface.

QUICK SHIFTER KIT

08U72-MKN-D50

By measuring the intensity of the shifting input, the quick shifter enables the rider to change gear without the need to operate the clutch lever or shut the throttle. The system aids upshifting, maximizing the riding experience. Not compatible with E-Clutch versions.

REAR SEAT COWL

08F71-MKY-E20ZA / 08F71-MKY-E20ZB

Elevate your motorcycle's racing aesthetics with this Rear Seat Cowl, complete with a comfort pad. For a truly exclusive appearance, consider the optional Aluminum Seat Cowl Plate 08F76-MKN-D50 (available separately). Replaces the pillion seat.

Available in the following colour options:

• 08F71-MKY-E20ZA Grand Prix Red *R-380*

• 08F71-MKY-E20ZB Mat Gunpowder Black Metallic *NH-436*

OIL LEVEL GAUGE

08F81-MKY-E20

The Oil level gauge is made out of high-quality, precision-cut aluminum. The filler cap is anodized in vibrant red, and both sides of the handgrip are laseretched with the Honda logo. It has a hole to wire it for those riders who want to use it on a circuit.

WHEEL STICKER SET

08F84-MFJ-8*0A

Set of Wheel Stripes containing 3 stripes per wheel side and including Honda Racing stickers.

Available in 5 colours:

• 08F84-MFJ-810A - Pearl Sunbeam White

• 08F84-MFJ-820A - Italian Red

• 08F84-MFJ-830A - Candy Tahitian Blue

• 08F84-MFJ-840A - Dragon Green Metallic

• 08F84-MFJ-850A - Digital Silver Metallic

TANK BAG

08ESY-MKJ-TKB18

A simple and functional tank bag adapted to the tank of the unit. Thanks to the specific attachment included, the stable mounting of the tank bag does not disturb the handling of this machine. A clear pocket on the top of the bag makes it possible for easy smart phone storage.

• Bag capacity: 3L

• Rain cover included.

• Dimensions (W x L x H): 178 x 285 x 130

REAR SEAT BAG

08ESY-MKJ-STB18

A simple and functional rear seat bag specifically adapted to the tapered shape of the rear seat. Easy and stable mounting when installed with the included attachment. With the following specifications:

• 15L of Capacity that can be expanded to 22L

• Included Rain cover

• Dimensions in mm (W x L x H): 355 x 365 x 243

Comfort

HIGH WIND SCREEN

08R70-MKN-D10 / 08R71-MKN-D10

Replacement screens offering additional wind protection without compromising visibility.

2 models available:

• 08R70-MKN-D10 Clear

• 08R71-MKN-D10 Smoke

GRIP HEATERS

08ESY-MKY-HG

Extremely slim heated grips which provide 360° heat around the grips. Temperature adjustment level is displayed on the TFT monitor while and operated through the handle switch. Features 5-step variable heating levels, integrated circuit to protect the battery from draining and smart heat allocation that focuses on the area of the hands most sensitive to cold. Attachment and high temperature cement included.

ACCESSORIES CBR500R

Is reliability supposed to be boring?

It’s not rare to find some CB500 proudly boasting more than 300,000 kms (more than 186,000 miles), but the long-time favourite of the couriers and the driving school is much more than a workhorse. Beginning in France in 1996, the CB500 Cup spread across Europe quickly. Since 2014, it is on a CBR500R that young talents try to make a name by themselves, on a budget. Sebastien Charpentier or James Toseland, to name a few, started there.

The CBR500R Cup.

Accessories Packs

Protection

TANK PAD (CBR LOGO)

08P71-MKF-DK0

A distinctive arrow-shaped grey tank pad, showcasing the CBR logo, designed to safeguard your tank's paintwork from scratches and rubbing.

TANK PAD (HONDA WING LOGO)

08P61-KYJ-800

Design

SEAT COWL

08F76-MJW-J00ZC / 08F76-MJW-J00ZR

A seat cowl is a custom-shaped and color-matched cover designed to replace the standard passenger seat on a motorcycle, offering a sleek and sporty appearance. Available in the following colours:

• 08F76-MJW-J00ZC Mat Gunpowder Black Metallic *NH436M*

• 08F76-MJW-J00ZR Grand Prix Red *R380*

• 08F76-MJW-J00ZF Graphite Black *NHB01*

WHEEL STRIPES KIT 17"

08F72-MKP-J40Z*

Customize your bike effortlessly with this user-friendly wheel stripes kit (one kit per wheel).

You can choose from five striking colors:

• 08F72-MKP-J40ZD Lemon Ice Yellow

• 08F72-MKP-J40ZE Indi Grey Metallic

• 08F72-MKP-J40ZG Pearl Metalloid White

• 08F72-MKP-J40ZH Matte Crypton Silver Metallic

• 08F72-MKP-J40ZJ Seal Silver Metallic

Comfort

12V SOCKET

08U70-MJW-J00

This convenient 12V Socket allows to charge electrical equipments (Provides 2A).

HIGH WINDSCREEN (SMOKE)

08R70-MKP-D00ZA

A smoked windscreen that offers superior wind protection compared to the standard option, providing enhanced comfort for the rider.

HEATED GRIPS

08T72-MLR-D00

The Grip Heater is a slim handlebar accessory providing 360° efficient heating for the rider's hands in cold weather. It features adjustable heat levels, smart heat allocation, and integrates seamlessly with the bike's design. Attachment sold separately.

Luggage

REAR SEAT BAG WITH ATTACHMENT

08ESY-MKP-RRSEAT

Functional rear seat bag with rain covers providing a capacity of 15L that can be expanded to 22L. Easy to attach and perfectly stable thanks to the specific attachment included.

TANK BAG

08L71-MKJ-D00

Practical 3L tank bag featuring a clear pocket on top for a convenient smartphone storage. Easy to fit, this tank bag doesn't interfere with the handling of the motorcycle. Rain cover is included. Dimensions in mm (W x L x H): 178 x 285 x 130. Tank Bag Attachment sold separately.

35L TOP BOX

08ESY-MKP-TB19

Kit including a 35L Top Box and all the components needed to install it on the bike (rear carrier and base). The Key system included in the kit allows to operate the Top Box with the motorcycle's same ignition key. Inner bag 08L09-MGS-D30 also included.

The specific details of this brochure do not apply to any particular product supplied or offered for sale. Manufacturers reserve the right to vary specifications, including colours, with or without notice at such times in such manner as deemed appropriate. Major as well as minor changes may be involved. Every effort, however, is made to ensure the accuracy of the particulars contained in this brochure. Consult your Dealer for details regarding the specifications of any featured product. This publication shall not constitute – under any circumstances whatsoever – an offer by the Company to any individual. All sales are made by the Distributor or Dealer subject to and with the benefit of the standard Conditions of Sale and Warranty provided by the Distributor or Dealer, copies of which may be obtained upon request. While efforts are made to ensure specification accuracy, brochures are prepared and printed several months in advance of distribution and consequently cannot always immediately reflect either changes in specification or in some isolated cases the provision of a particular feature. Customers are always advised to discuss specific details with the supplying Dealer, especially if a selection is dependent upon one of the features advertised. Please contact your local dealer for information and specifications. Please note that the fuel consumption figures provided are results obtained by Honda under standardised testing conditions prescribed by WMTC. Tests are conducted on a rolling road using a standard version of the vehicle with only one rider and no additional optional equipment. Actual fuel consumption may vary depending on how you ride, how you maintain your vehicle, weather, road conditions, tyre pressure, installation of accessories, cargo, rider and passenger weight, and other factors. You accept that if you do go ahead and make a purchase or enter into any kind of transaction, whether for payment or not, you did so entirely in reliance on your own skill and judgement and not on that of anyone else.

RIDE WITH STYLE Read the owner’s manual thoroughly. Get to know your machine and its capabilities. Concentration assists anticipation. Observe other road users’ movements. Brake in plenty of time. Always wear a helmet and quality kit, ride fit and NEVER after drinking alcohol. Good roadcraft and courtesy identify the skilled and stylish rider. Honda endorse the law that all helmet visors must comply with BS 4110. Visors that transmit less than 50% of visible light cannot legally be used on the road.

CUSTOMIZED PARTS IMPORTANT NOTICE

Please read carefully before purchasing any Customized Parts. The manufacturer and distributor of each Customized Part guarantees and warrants the function, performance, and quality as detailed with the Customized Part. Customized Parts must be correctly attached or fitted in compliance with the laws and regulations.

It is the responsibility of the vehicle owner/user to ensure the Customized Parts are correctly attached or fitted to help ensure the safe use of the vehicle, the safety of the vehicle user and others.

You must read carefully and follow the instructions in the Instruction Manual/Leaflet attaching/fitting as instructed. Please make sure to conduct an inspection prior to riding the vehicle, in addition to regular maintenance checks.

If you have any queries about the attachment/fitting, please contact the dealership where you purchased the Customized Parts.

If you experience any abnormalities during the ride, please stop immediately and arrange for an inspection at a dealership.

In any absence of any negligence or breach of duty by us, the use of such Customized Parts is at your own risk. This will not affect your statutory rights.

• Prices are Suggested Retail Price for reference only. Actual sales prices are defined at each dealership.

• Prices do not include the vehicle price, or service rate to attach the option parts etc. These will be charged separately.

Honda Motor Europe – Motorcycles Cain Road, Bracknell, Berkshire, RG12 1HL England insert local URL here

• The specifications, price etc. of Customized Parts are liable to change without advance notice. Customized Parts may require time for delivery or could be discontinued without advance notice.

• You must read carefully the Instructions and Customized Parts must be attached/fitted correctly as instructed to vehicles and parts on the vehicle as specified in the instructions, and should not be applied anywhere that is not specified.

• To attach/fit the Customized Parts, special treatment (e.g. wiring) may be necessary. Please contact the dealership should you have any queries.

• We cannot guarantee that it is possible to attach/fit a combination of various Customized Parts. Such attachments/fittings may not be possible, or require an extensive level of treatments.

• The Customized Parts are not Honda Genuine parts, therefore although some Customized Parts may be similar to Honda Genuine Parts the Durability, Functionality, Quality etc. may differ.

• By attaching the Customized Parts, there is a risk that engine characteristics or drivability may be affected.

• Certain Customized Parts may require to be attached/fitted at a certified factory or workshop, in this instance we strongly recommend attachment/fitting at a certified factory or workshop. Please contact the dealership for the certified factory or workshop details.

• Any fitting time stated is for reference only. For details as to fitting time, please contact the dealership.

• The exact color of the Customized Parts shown in photos may not match the actual color of the Customized Parts.

Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.