ESSENTIAL CEDIA

COOLER FEATURES, TRICKIER DESIGN

Three key take-aways from CEDIA and CTA’s new recommended practices for HDMI Systems explained by Walt Zerbe, Senior Director of Technology and Standards, CEDIA.

CEDIA and the Consumer Technology Association (CTA) have recently released the joint best practices document CEDIA/CTARP28 HDMI System Design and Verification Recommended Practice. Here are three of its key take-aways.

HDMI 2.1 has ushered in support for a wide range of features that end customers are really excited about. For instance, High Dynamic Range (HDR) dynamic metadata can adjust colour and contrast display settings on a sceneby-scene or even frame-by-frame basis. Variable Refresh Rate (VRR) syncs the refresh rate of a sink with the refresh rate of a source. Real time interactive content – such as a video game – doesn’t render at a fixed frame rate, so VRR prevents screen tearing. And of course, HDMI 2.1 is capable of ultra-high-definition video formats up to 10K resolution 60Hz with HDR and 4:4:4 sampling, or 120Hz with HDR and 4:2:2 sampling.

These are specs that directly, substantively impact the customer’s experience, and that they are willing to upgrade media systems to get. They’re also fragile: any weak link in the signal chain can cause these advanced features to falter or fail, resulting in fallback to legacy video modes or even signal loss.

Protecting Advanced Features from Source to Sink HDMI has always been famous for its plug-and-play functionality, but not all advanced features are automatically enabled. Customers looking to experience ultra-smooth gameplay due to VRR may not realise that this feature needs to be enabled in the settings of both source and sink. Similarly, many displays don’t support all features on all input ports – integrators will need to pay close attention to which features, such as HDR, are supported on which ports. And of course, all required features must be supported by every link in the signal chain, with full metadata pass-through. Any manipulation of the signal data, including scaling and processing, can result in loss of HDR if the repeater devices don’t support all the desired formats. If there are multiple displays with varying capabilities, design to the highest resolution and feature set needed and downscale as required at the legacy sinks.

More complex HMDI systems generally require longer cable runs, including repeaters, alternative transport technologies (extenders), and/or active cabling. When using category cable to extend the HDMI signal, including for HDBaseT extension, be aware that HDMI is very sensitive to crosstalk. Unshielded Twisted Pair (UTP) cables carrying HDMI signals shouldn’t be bundled or pinstriped, especially in the first 20m (65ft) of the run, and the conduit fill rate for such cables shouldn’t exceed 40%. RP28 recommends instead using shielded Cat 6A cable or better, which enables bundling and up to 60% conduit fill. Integrators will also need to pay careful attention to the native bandwidth capabilities of whatever extension technologies they’re using – and, if that bandwidth is lower than the requirements for full resolution and sampling, they’ll need to examine what data rate reduction strategies the technology deploys. Some extenders use pixel bit-depth down-sampling or video compression to offer higher format support at lower bandwidth. These strategies can impact the image quality and HDR functionality – integrators will have to discuss the trade-offs with their clients.

TRUE LOSSLESS AUDIO ARRIVES

As more customers are upgrading their media rooms, home cinema, and gaming environments to support lossless Hi-Fi audio, multi-channel surround sound, and objectbased audio, the HDMI audio return channel has gotten a much-needed upgrade as well. The former HDMI Ethernet Channel (HEC) can now be repurposed to support Enhanced Audio Return Channel (eARC). eARC is capable of transmitting audio at a frame rate of 768KHz, meaning it’s fully compatible with lossless audio formats, expanded surround sound formats like Dolby Digital Plus 7.1, and object-based formats like Atmos. Integrators don’t necessarily need all-new Ultra-High-Speed HDMI 2.1 cables to take advantage of this new feature – though all Ultra High Speed cables will support eARC, any legacy cable labelled “with Ethernet” is also compatible.

RP28 includes detailed testing procedures for verifying the functionality of HDMI features; bandwidth charts to help you assess system throughput needs; and a design checklist to help ensure you’ve carefully planned every necessary element of the video system. It’s free to CEDIA members so now that you’ve had a taste, go get the full meal at cedia.net/standards.