UHMW Strips

REPLACEMENT MECHANICAL ELECTRIC SWITCH

Push Button Switch - 115/230V, 30/15A, 60Hz.Designed for larger machines;measures 4-1/2" x 2-1/2" x 2-1/4". Imported.

907-134 Push button switch

$22.79

MAGNETIC MOTOR SWITCHES SINGLE PHASE OR THREE PHASE

Enclosed in plastic housings with a rubber gasket between the cover and body, these handsome, practical switches are for indoor use.Besides protecting against thermal overload, these switches automatically shut down if the electricity goes off to avoid starting up when the power comes back on.The start button is recessed to help avoid accidental starting. The knockouts in the housing are threaded for conduit connection or a wire pigtail grip connector.A schematic comes with the switches, but it does assume you have some knowledge of wiring basics.Imported.

Single phase switches,220-240 Volt

923-950 1HP, 6.5A $57.49 923-957 2HP, 15A $58.79 923-964 3HP, 22A $68.49 923-971 5HP, 28A $87.69

Three phase switches,220-240 Volt

923-978 1HP, 3.4A $64.29 923-992 3HP, 10A $68.29 923-999 5HP, 15A $75.99 170-462 7.5HP, 26A $79.29 170-465 10HP, 34A $99.99

172-844

172-850

172-847

WOODTEK® DUST COLLECTOR REMOTE SWITCHES

CONVENIENTLY TURN DUST COLLECTORS ON AND OFF FROM WITHIN FIFTY FEET

The Woodtek® Remote Dust Collector Switches will turn on and off dust collectors from up to approximately fifty feet and can transmit through doors and walls.No wiring necessary, just plug your dust collector into the transmitter and turn on and off with the remote.Comes with 6 ft.grounded cord and one remote.Imported. • 172-844 Woodtek® 110V Dust

Collector Remote Switch.Works only with dust collectors up to 1.5HP. 110 Volts, 15 Amp switch. • 172-847 Woodtek® 220V Dust

Collector Remote Switch Works only with dust collectors up to 3.0HP.220

Volts, 22 Amp switch. • 172-850 Woodtek® OEM

Replacement Remote for 110V & 220V Dust Collector Switches.

Remote uses standard 23A-12V alkaline battery included.

172-844 Woodtek® 110V Dust Collector Remote Switch $86.29 172-847 Woodtek® 220V Dust Collector Remote Switch $88.49 172-850 Woodtek® OEM Replacement Remote $20.59

WOODTEK® HEAVY DUTY PUSH BUTTON SWITCH FEATURES LARGE STOP PADDLE FOR EASY OPERATION

The Woodtek® mechanical interrupt switch has capacity for 120/230V, 1PH and 208/230/460V, 3PH.This Single Throw, 3 Pole (ST3P) switch features a large auxiliary stop paddle, an enclosed single receptacle size utility box with 4 knock out plugs and a lock out pin for the start button.UL Listed.Schematics included. Imported.

Volts

120V 230V 208V 230V 460V

Phase

1PH 1PH 3PH 3PH 3PH

Amps

35A 20A 20A 20A 15A

140-066 Push button switch w/paddle stop

HP(max)

2HP 3HP 5HP 5HP 10HP

WOODTEK® SAFETY POWER PADDLE 110 VOLT TOOL SWITCH

LARGE STOPPADDLE IS EASY TO TURN OFF IN AN EMERGENCY

Mount the Woodtek®100 Volt Power Switch where you can use your hip or knee to easily bump the large red stop paddle.Perfect for router tables and other stationary workbench power tools.Works with soft-start routers.Has a 20” female cord length and 6-1/2 ft.grounded cord length.Rated at 15 Amps, 110 Volts and not to be used with higher voltage.Imported.

172-841 Woodek® Safety Power Paddle 110 Volt Tool Switch $38.49

LONG WEARING, SLIPPERY STRIPS FOR JIGS AND FIXTURES MACHINE LIKE WOOD

Ultra high molecular weight plastic is dense, very slippery and tremendously durable.All measurements are approximate.It machines just like wood except it has a tendency to clog fine countersinks.Use the 3" x 10' x .030" thick self sticking wearstrip on machine fences, tool bottom plates or base plates. USA.

Each 3+

836-990 1/8" x 4" x 48" UHMW strip $12.29 $10.79 836-997 1/4" x 4" x 48" UHMW strip $25.79 $22.59 122-432 3/8" x 4" x 48" UHMW strip $38.99 $34.09 842-702 1/2" x 4" x 48" UHMW strip $46.99 $41.09 837-004 3/4" x 4" x 48" UHMW strip $62.79 $54.89 837-011 3/8" x 3/4" x 48" UHMW strip $9.59 $8.49 813-784 3" x 10' x .030" UHMW wearstrip $27.29 $23.99

MINITRACK T-SLOT TRACK ALSO FITS MITER SLOTS

Ready-to-use track and miter bar stock (3/8" x 3/4").The extruded aluminum stock has a recessed T-slot area for fastener heads that will fit a 1/4-20 bolt head.The bolt will slide along but not turn in the T-slot.Track can be surface mounted or recessed in a 3/4" dado. Mounting screws included. USA. Note: Color may vary, tracks are either silver or black. 115-310 24" minitrack miter bar stock

$13.99