SPECIFICATION
MODEL
PF 27
PF40
PF65
PF 100
Type
Std
Std
Std
Std
Capacity (Tonne)
27
40
65
100
Length Of Stroke mm (FIXED)
80
100
125
150
Stroke Per Minue (SPM)
80
70
60
50
Allowable Number of Inter Mittent stroke
35
30
25
20
Rated Tonnaqe Point mm
3.2
4
4
6
Die Height mm
230
250
300
350
Adjustment of Slide mm
50
60
70
80
Area of Slide [LR x FB]
350X260
420X300
530X420
680X520
40
50
50
50
710x400
800x420
900x520
1100x620
Thickness of Bolster mm
90
115
130
150
Inside Measurement of Frame mm
478
526
574
680
[3 HP] 2.2
[5 HP] 3.7
[7.5 HP] 5.5
---
---
---
Diameter of Shank Hole mm Area of Bolster
Main Moter [KW] Moter for Slide adjustment Electric Power Supply
415v,3Ø 50 Hz
415v,3Ø 50 Hz
415v,3Ø 50 Hz
[7.5 HP] 5.5 / [10 HP] 7.5 --415v,3Ø 50 Hz
Control Voltage
230v
230v
230v
230v
Air Pressure [atms]
5.5
5.5
5.5
5.5
Foot Size [LR x FB x H]
780x1060x2050
880x1190x2700
960x1450x2490
1200x1690x3250
Note : Specification for V. Speed , H Speed, V Stroke Length Models Availble On Request
Regd. Off.: 5B/24, Siddheshwar, Kamgar Nagar Road, Kurla (E), Mumbai - 400024. India Tel: +91-22-25292227. Works: G/4, Ashapura Soc., J. M. Mandir Rd., Asalpha, Ghatkopar (W), Mumbai - 400084. Tel.: +91-22-25102431, 25104108. e-mail: pressfieldengg@rediffmail.com
SANJU HINGE / BWP
E N G I N E E R I N G
PRESSFIELD - 27 E N G I N E E R I N G We have been successfully developing Sheet metal forming Presses for various Industrial Segments. Built tough, Durable, Economical, abiding International Quality Standards, Smart design for user friendliness. Delivers maximum returns of investments. Capacity of producing hour after hour at maximum speed there by increasing productivity. Low opera cost & maintenance are added features. THE POWER PRESS THAT IMPRESS THE PRODUTIVITY
PRESS FRAME A Compact all welded steel frame, saving space, and at the same time absorbing maximum Impact.
CLUTCH AND DRIVE
SIX POINT GUIDE SYSTEM
Pneumatic combination clutch-brake unit ensures shorter braking time, with automatic synchronization of well as silent, vibration less operations, A built in Hydraulic overload system. Completely ensures press and tool Safety during any overload situations.
GEARS Gears made of alloy steel, which is precisely machined & meshed which runs at high speed at low noise level. This ensures amiability and higher productivity
CRANK POSITION INDICATOR Incorporated is a indicator monitoring the slide Position in digress, this is vestal
27
40
65
100
A
2050
2700
2490
3250
B
750
800
950
1100
C
1350
1450
1750
2000
D
1060
1190
1450
1690
E
260
300
340
450
F
1080
1280
1440
1780
G
780
880
960
1200
H
690
700
690
650
in Setting tool and as well protecting it
HYDRAULIC OVERLOAD SAFETY A built-in hydraulic overload protection (OLP) system Completely ensures press
process makes the restart operation quick and easy, saving valuable production time. This feature also helps releasing press jam quickly.
and tool safety during any overload situation. As soon as the load exceeds the set
LUBRICATION
value, the OLP device will release the hydraulic pressure and at the same time
Centralized Automatic oil lubricator, which ensues high reliability of smooth running.
stop the forward motion of slide, thus preventing overload. To reset, move the slide to top dead center by inching operation mode. The hydraulic pump will automatically build hydraulic pressure to the original set point. The simple resetting
OPERATOR PANEL Mounted on the Frame is the electric Panel & Pneumatic Controls, which is simple to operate.
Forced Lubrication
Hylam Liners