Hub
Ceiling/wall recessed application Ceiling mounted application Suspended application Flush and offset installation of luminous module Installation without tools
Hub iGuzzini
Catalogue news 2005 This catalogue introduces the New Products for Indoor and Outdoor Lighting Systems for the year 2005.
Internal Lighting Systems The internal catalogue illustrates internal fittings.
External Lighting Systems This catalogue presents the whole iGuzzini range of external fittings.
1
Hub is a modular lighting system with two types of preconfigured holders that can be used for the attachment of many different light fittings, and different sets of luminaires that can be adjustable extractable, flush, or recessed. Modular, sectional, recessed, suspended, or ceilingmounted‌ the Hub system is where you start when you design and
Frame Wall Recessed
Minimal Ceiling Recessed
Frame Ceiling Recessed
Hub design P. Castiglioni
iGuzzini
configure lighting for retail stores, offices, and exhibition areas. It not only saves space, but it also saves time. Hub has been designed to make it very fast and easy to change or upgrade the light fixtures used in interior spaces. The fittings have quick-connecting terminals and are secured to the structure. No tools are necessary.
Ceiling
Pendant
Minimal Wall Recessed
Hub
MODULAR SECTIONAL SYSTEMS
design P. Castiglioni
iGuzzini
A view of all the possible combinations of the Hub system Module with Le Perroquet extractable
300
600
Module with gyroscope
300
600
HAL
300 150
600 300
Structural Modules Available for recessed (Minimal and Frame) and for Ceiling-mount/pendant
Module with HIT Pixel Plus 35 W
450 450
750 Covers
1200 HIT 70 W
Can be installed onto the, structural modules in order, to adapt to a required lighting composition.
600
600
750
2400 1200 900 Adjustable Module
450 1050
600 1200
Adjustable Fluorescent Module
750
1350
Fisso 600 Fixed Fluorescent Module 1200
1500
4
Hub design P. Castiglioni
MODULAR SECTIONAL SYSTEMS iGuzzini
The Hub modular system combines maximum flexibility with fast and easy installation. The sales order should include all items that make up the system: • Structural Module • Light Module • Accessories and Components Flush installation
Power terminal block
Offset installation
Pass-through cables
Support cables Power terminal block
End cap
Support brackets
Fixed FL module
Frame structural module
Adjustable FL module Module with gyroscope
Dark Light FL module
Pixel Plus Module
Asymmetrical FL module
Le Perroquet extractable Module
Adjustable MH-HAL Module Safety cable
Quick-connecting terminal
5
Hub
MODULAR SECTIONAL SYSTEMS
design P. Castiglioni
iGuzzini
Minimal recessed
Recessed version • Two types of profiles can be wall or ceiling-mounted: supporting profiles with a rim (like the Frame model, for false ceilings with cross-sections from 1 to 30 mm) or flush with the surface (like the Minimal model, for false ceilings with cross-sections of either 12,5 or 15 mm). • The structure is made up of pregalvanized steel support brackets and extruded aluminium profiles. • Modules can be installed in continuous lines via special connecting joints.
• Ready for 7-pole pass through cables: L1, L2, L3, neutral, groung, D1 and D2 (for dimming possibility). • Blind cover made of extruded aluminium, with retention cables and springs. • The technical specifications of the fitting comply with EN60598-1 standard. • IP20 • F seal • IMQ-ENEC approval • Class of insulation I
Frame recessed Ceiling-mount/pendant versions • The ceiling-mount model can also be installed as a pendant via special steel cables. • The structure is made up of pregalvanized steel support brackets and the aluminium profile is covered by a conforming steel sheet. • Modules can be installed in continuous lines via special connecting joints. • Ready for 7-pole pass through cables: L1, L2, L3, neutral, groung, D1 and D2 (for dimming possibility).
• Blind cover made of extruded aluminium, with retention cables and springs. • The technical specifications of the fitting comply with EN60598-1 standard. • IP20 • F seal • IMQ-ENEC approval • Class of insulation I
Ceiling-mount/pendant
Simulation
• A system of sectional modules, which can be recessed, ceilingmounted, or suspended. For use with halogen, discharge, and fluorescent lamps. • The light modules that can be applied to the system are the same both in the recessed versions as well as the pendant/ceiling-mount versions. • The light modules can be installed in two different positions: flush with the surface of the ceiling or offset by -10mm.
Installed in continuous lines
6
Vertical installation
90° Corner joint
Quick-connecting terminal
Hub Minimal recessed design P. Castiglioni
MODULAR SECTIONAL SYSTEMS iGuzzini
03
15
code
length
12,5
191
Minimal structural module for false ceilings with cross-section of 12,5 mm 1203 2642 2404 2643
124 190
IP20 146x1203/2404+25
191
Minimal structural module for false ceilings with cross-section of 15 mm 1203 2644 2404 2645
15
01
124 190
IP20 146x1203/2404+25
If several modules are to be installed, the length of the groove into the false ceiling must be the same as the overall length of the structures + 25 mm
accessories and components code
Cover plate 6912 6913 6914 6915 6916 6917 6918 6919
length
150 300 450 600 750 900 1050 1200
code
length
Concealed coupling 6928 Available in colour 00
7-pole 1,5 mm2 pass-through cables with terminal blocks 6901 (4 terminal blocks) 1200 6902 (8 terminal blocks) 2400 6903 (41 terminal blocks)12500 Available in colour 00
Cover plate with mains voltage track 9029 1200
7-pole 1,5 mm2 pass-through cables without terminal blocks 6904 1200 6905 2400 6906 12500 6907 24500 Available in colour 00
Minimal end caps with power terminal blocks and spacers for structural installation 6920 2 items
Terminal blocks 6908 6909 for 6904-6905-6906-6907
1 item 4 items
Available in colour 00 Plates with terminal block and cable-clamp to join pass-through cables 6922 Available in colour 00
Set of supporting cables 6900 2 items
2000
Available in colour 00 Max load for each cable 30 Kg
7
Hub Frame recessed design P. Castiglioni
MODULAR SECTIONAL SYSTEMS iGuzzini
03
15
code
Frame structural module 2646 2647
length
1203 2404
193
01
124 IP20
164
If several modules are to be installed, the length of the groove into the false ceiling must be the same as the overall length of the structures + 21 mm
152x1203/2404+21
accessories and components code
Cover plate 6912 6913 6914 6915 6916 6917 6918 6919
length
150 300 450 600 750 900 1050 1200
code
length
90째 Corner joint 6923
Concealed coupling 6929 Available in colour 00
Cover plate with mains voltage track 9029 1200
7-pole 1,5 mm2 pass-through cables with terminal blocks 6901 (4 terminal blocks) 1200 6902 (8 terminal blocks) 2400 6903 (41 terminal blocks)12500 Available in colour 00
Frame end caps with power terminals 6921
Plates with terminal block and cable-clamp to join pass-through cables 6922 Available in colour 00
2 items
2 items
7-pole 1,5 mm2 pass-through cables without terminal blocks 6904 1200 6905 2400 6906 12500 6907 24500 Available in colour 00 Terminal blocks 6908 6909 for 6904-6905-6906-6907
1 item 4 items
Available in colour 00 Set of supporting cables 6900 Available in colour 00 Max load for each cable 30 Kg
8
2000
Hub
ceiling-mount/pendant
design P. Castiglioni
MODULAR SECTIONAL SYSTEMS
iGuzzini 03
15
code
Structural module 2648 2649
length
1203 2404
202
01
IP20
156
accessories and components code
Cover plate 6912 6913 6914 6915 6916 6917 6918 6919
length
150 300 450 600 750 900 1050 1200
Cover plate with mains voltage track 9029 1200
code
length
7-pole pass-through cables 1,5 mm2 with terminal blocks 6901 (4 terminal blocks) 1200 6902 (8 terminal blocks) 2400 6903 (41 terminal blocks)12500 Available in colour 00 7-pole pass-through cables 1,5 mm2 without terminal blocks 6904 1200 6905 2400 6906 12500 6907 24500 Available in colour 00 Terminal blocks 6908 6909
1 item 4 items
Available in colour 00
End caps with power terminal blocks and cable-clamp 2 items 6965
Ceiling attachment 6966 Available in colour 00
Concealed coupling 6967
Ceiling attachment with cables 2000 6962
Available in colour 00
Plates with terminal block and cable-clamp to join pass-through cables 6922 Available in colour 00
2 items
Power supply unit with suspension cable (for electronic versions) 2000 6963 Power supply unit with suspension cable (for dimmable lighting versions) 2000 6964 9
Hub module with Le Perroquet extractable design P. Castiglioni
MODULAR SECTIONAL SYSTEMS
iGuzzini
Simulation
• Light module that goes with the extractable Le Perroquet fixture. Available in single and double versions, for use with low voltage and discharge lamps. • The optical compartment and the heat dissipator are made of pressure die-cast aluminium. The projector allows the extraction of the optical compartment and its rotation both around the vertical axis (limited by special blocks) and the horizontal axis by 65° in relation to the vertical axis. • All the movements can be mechanically blocked to precisely aim the luminous flux. • The lamp compartment chassis is made of extruded aluminium on the visible side, and of steel sheet on the interior non-visible side.
• Equipped with retention cables and scratch preventing springs. • An electronic power supply is included within the module. • Installation requires no tools. Installation can be flush with the surface or offset by -10 mm. • Available accessories are the following: coloured filters, finely grooved glass, wall washer screen, and orientable and adjustable flaps. • The technical specifications of the fitting comply with EN60598-1 standard. • IP20 • F seal • IMQ-ENEC approval • Class of insulation I
350°
Flush installation
10
Offset installation
Installation without tools
Safety cable
Mechanical locking mechanism for aim
Fast frame-mounting operations
Orientable spotlights
190°
190°
Hub module with Le Perroquet extractable design P. Castiglioni
MODULAR SECTIONAL SYSTEMS
iGuzzini 03
15
lamp
ƒ
,PD[ FG ƒ
:
ƒ
45 &%& *8 D ƒ
,PD[ FG
Double module complete with electronic transformer 5877 2x50 W 12V QR CBC 51 IP20
ƒ
:
ƒ
45 &%& *8 D ƒ
,PD[ FG .OP
Module complete with electronic control gear 5878 20 W HIT (CDM-Tm) IP20
ƒ
:
Complete with lamp and protection glass
ƒ &'0 WP 3*-
D
300
K
G
(P
(PD[
K
G
(P
(PD[
300
600
/X[ .OP ƒ
ƒ
G
/X[ ƒ
ƒ
(PD[
/X[ ƒ
ƒ
(P
121
: 45 &%& *8 D ƒ
K
121
ƒ
74 118
IP20
/X[ ƒ
ƒ
74 118
,PD[ FG
Module complete with electronic transformer 5876 50 W 12V QR CBC 51
ƒ
K
G
(P
(PD[
121
code
300 74 118
01
accessories code ,PD[ FG
Refractor for elliptical distribution of the light flow 9538
ƒ
& J ƒ /X[ ƒ
Available in colour 24 :
45 &%& *8 D ƒ
ƒ
ƒ
K
G
G (P (PD[
Coloured filters 9536
Directional flaps 9528
Available in colours 05-06-09-24
Available in colour 04
Maximum 35 W output for QR CBC 51 Wall-washer screen 9532
11
Hub module with Pixel Plus design P. Castiglioni
MODULAR SECTIONAL SYSTEMS
iGuzzini
• Equipped with retention cables and scratch preventing springs. • An electronic power supply is included within the module. • Installation requires no tools. Installation can be flush with the surface or offset by -10 mm. • Available accessories are the following: coloured filters and spill-ring. • The technical specifications of the fitting comply with EN60598-1 standard. • IP20 • F seal • IMQ-ENEC approval • Class of insulation I
Simulation
• A light module that goes with Pixel Plus. Available in single and double versions, for use with low voltage and discharge lamps. • Made of aluminium and thermoplastic material, with professional optics. These fittings are equipped with double orientation joints. The internal joint allows a change in orientation up to 40°, while the external joint allows a change in orientation up to 65°. The orientation is maintained by friction over a total contact arc of 355°. • The lamp compartment chassis is made of extruded aluminium on the visible side, and of steel sheet on the interior non-visible side.
Flush installation
12
Offset installation
Installation without tools
Safety cable
Front frame connected to the reflector
Ergonomic tab for aiming and lamp adjustment
Internal adjustability
Double-adjustability
Hub module with Pixel Plus design P. Castiglioni
MODULAR SECTIONAL SYSTEMS
iGuzzini 03
15
optic
ƒ
,PD[ FG ƒ
:
ƒ
45 &%& *8 D ƒ
,PD[ FG
Double module complete with electronic transformer 5880 2x50 W 12V QR CBC 51 IP20
ƒ
:
ƒ
45 &%& *8 D ƒ
Module complete with electronic control gear 5881 35 W HIT 5882 70 W HIT 5883 70 W HIT
,PD[ FG .OP ƒ
ƒ
F S F
ƒ +,7 *
D
300
K
G
(P
(PD[
K
G
(P
(PD[
G
(P
(PD[
300
600
/X[ .OP ƒ
:
IP20
G
/X[ ƒ
ƒ
(PD[
/X[ ƒ
ƒ
(P
121
: 45 &%& *8 D ƒ
K
121
ƒ
116
IP20
/X[ ƒ
ƒ
116
,PD[ FG
ƒ
K
300 121
lamp
Module complete with electronic transformer 5879 50 W 12V QR CBC 51
450 116
code
5881 ƒ
:
ƒ +,7 *
ƒ
K
G
(P
(PD[
600
5882-5883 300
F S F
300 121
Double module complete with electronic control gear 5884 2x35 W HIT 5885 2x70 W HIT 5886 2x70 W HIT
D
ƒ
121
/X[ .OP ƒ
116
,PD[ FG .OP
750 116
IP20
5884
121
600
1200 116
01
5885-5886
accessories code
code
Coloured filters 4491 for 5879-5880-5881-5884
Spill ring 9546 for 5879-5880-5881-5884
Available in colours 05-06-09-24
Available in colour 04
13
Hub module with gyroscope design P. Castiglioni
MODULAR SECTIONAL SYSTEMS
iGuzzini
Simulation
• A light module with a gyroscope. Available in single and double versions, for use with low voltage lamps. • The optical assembly has an aluminium chassis, to which the optical compartments are secured. The assembly allows an inclination of each different lamp by ±45° in relation to both the horizontal and vertical axes. • The lamp compartment chassis is made of extruded aluminium on the visible side, and of steel sheet on the interior non-visible side. • Equipped with retention cables and scratch preventing springs.
Flush installation
14
Offset installation
Installation without tools
Safety cable
Orientable gyroscopes
• An electronic power supply is included within the module. • Installation requires no tools. Installation can be flush with the surface or offset by -10 mm. • Available accessories are the following: coloured filters and spill-ring. • The technical specifications of the fitting comply with EN60598-1 standard. • IP20 • F seal • IMQ-ENEC approval • Class of insulation I
Hub module with gyroscope design P. Castiglioni
MODULAR SECTIONAL SYSTEMS
iGuzzini 03
15
lamp ƒ
IP20
:
ƒ
45 &%& *8 D ƒ
,PD[ FG ƒ
:
ƒ
45 &%& *8 D ƒ
,PD[ FG
Double module complete with electronic transformer 5888 2x50 W 12V QR CBC 51 5890 2x50 W 12V QR 70
ƒ
IP20
:
ƒ
45 &%& *8 D ƒ
,PD[ FG ƒ
: 45 %$ G
ƒ D
ƒ
,PD[ FG
: 45 %$ G
ƒ D
ƒ
300
K
G
(P
(PD[
K
G
(P
(PD[
G
300
600
K
(P
(PD[
/X[ ƒ
ƒ
G
/X[ ƒ
ƒ
(PD[
/X[ ƒ
ƒ
(P
/X[ ƒ
ƒ
K
121
/X[ ƒ
ƒ
118
,PD[ FG
Module complete with electronic transformer 5887 50 W 12V QR CBC 51 5889 50 W 12V QR 70
121
code
118
01
ƒ
K
G
(P
(PD[
accessories code
code
Coloured filters 8753 for 5887-5888 8764 for 5889-5890
Spill ring 6958 for 5887-5888 Available in colour 04
Available in colours 05-06-09-24
15
Hub adjustable module design P. Castiglioni
MODULAR SECTIONAL SYSTEMS iGuzzini
Simulation
• Adjustable light modules (0-72°), for use with fluorescent, discharge and halogen lamps. • Extruded aluminium structure and die-cast aluminium end caps. • Equipped with retention cables and scratch preventing springs. • Electronic power supply for discharge and halogen models. The fluorescent model is available with the following control gear: electronic, digital dimmable (DALI); and emergency light with inverter. • Installation requires no tools. Installation can be flush with the surface or offset by -10 mm.
Flush installation
16
Offset installation
Installation without tools
Safety cable
Adjustability 0-72°
Switch dim
• The discharge/halogen models are equipped with a protective glass (except for code 5892). Available accessories are: a wall washer screen and a transversal louvred screen. A diffusing protective screen can be ordered as an accessory for the fluorescent model. • The technical specifications of the fitting comply with EN60598-1 standard. • IP20 • F seal • IMQ-ENEC approval • Class of insulation I
Hub adjustable module design P. Castiglioni
MODULAR SECTIONAL SYSTEMS iGuzzini
03
15
length ƒ
:
ƒ
*Complete with protection screen
+,7 &'0 7 * D ƒ ƒ
,PD[ FG .OP
ƒ
:
ƒ 6': 7* *; D ƒ ƒ
,PD[ FG .OP
Adjustable module 5893 150 W QT-DE 12
ƒ
IP20 :
ƒ 47 '( 5 V
Adjustable module with electronic control gear - symmetric optic 9006 55 W TC-L 750 9007 54 W T16 1350 Adjustable module with digital dimmable electronic (DALI) control gear - symmetric optic 9008 54 W T16 1350 Adjustable module with electronic control gear and permanent emergency light with inverter - symmetric optic 9009 54 W T16 1350
D
ƒ ƒ
,PD[ FG .OP
ƒ D
ƒ ƒ
,PD[ FG .OP
:
ƒ 7 *
D
ƒ ƒ
302
600
K
G
G (P (PD[
K
G
G (P (PD[
450
K
G
G (P (PD[
750 1350
& /X[ .OP ƒ
ƒ
IP20
ƒ
: 7& / *
& J ƒ /X[ .OP ƒ
ƒ
& /X[ .OP ƒ
ƒ
G (P (PD[
& /X[ .OP ƒ
ƒ
G
103
IP20
K
103
& /X[ .OP ƒ
ƒ
121
,PD[ FG .OP
121
lamp
Adjustable module complete with electronic control gear 5891* 70 W HIT 5892 100 W HST
103
code
121
01
ƒ
K
G
G (P (PD[
accessories code
code
Visor 6959 for 5891-5892-5893
Diffusing screen 6961 for 9007-9008
Available in colour 04
Available in colour 01
length
1184
Transversal louvre screen 6960 for 5891-5892 Available in colour 04
17
Hub fluorescent module design P. Castiglioni
MODULAR SECTIONAL SYSTEMS iGuzzini
Simulation
• Fixed fluorescent modules, for use with fluorescent lamps with symmetrical, asymmetrical, and dark-VDU light distribution. • Symmetrical dark light emission. Controlled luminance optics, L≤1000cd/m2 α 65°, are ideal for use in spaces with monitors as per the EN 12464-1 standard; the parallel plane optical system with biparabolic profile is made of mirrored anodized ultrapure aluminium. • Cables are electronic fluorescent, dimmable DALI electronic, or electronic with emergency lighting. • Dimmable DALI models are equipped with a switch-dim, which allows the user to adjust the light with a standard electric button.
Flush installation
18
Offset installation
Installation without tools
Safety cable
Controlled luminance (dark modules)
Switch dim
• Emergency models come equipped with inverter and battery supply; continuous emergency light with 1 hour miniumum duration, and terminal strip that is preconfigured for REST MODE. • Installation requires no tools. Installation can be flush with the surface or offset by -10 mm. • The fixed symmetrical modules are equipped with a screen for general lighting. • The technical specifications of the fitting comply with EN60598-1 standard. • IP20 • F seal • IMQ-ENEC approval • Class of insulation I
Hub fluorescent module design P. Castiglioni
MODULAR SECTIONAL SYSTEMS iGuzzini
03
15
lamp
length
Fluorescent module with electronic control gear - symmetric optic 9010 55 W TC-L 600 9011 54 W T16 1200 9012 80 W T16 1500 Fluorescent module with digital dimmable electronic (DALI) control gear - symmetric optic 9016 54 W T16 1200 9017 80 W T16 1500 Fluorescent module with electronic control gear and permanent emergency light with inverter - symmetric optic 9018 54 W T16 1200
Imax=6545 cd 90°
55 W
C75-255 CIE 180°
121
0°
,PD[ FG ƒ
:
90° UGR 35.1-34.3
DIN A.40 UTE 0.40E+0.00T F"1=459 F"1+F"2=771 F"1+F"2+F"3=942 CIBSE BZ4-.75/BZ5
6000
TC-L - 2G11
nL 0.40 46-77-94-100-40
85 9010 108
code
& &,( ƒ
ƒ 8*5
',1 $ 87( ( 7 ) ) ) ) ) ) &,%6( %= %=
7 *
Q/
600 1200 1500
01
ƒ
IP20
Complete with diffusing protection screen
ƒ
:
& J ƒ &,( ƒ
ƒ 8*5
',1 $ 87( ( 7 ) ) ) ) ) ) &,%6( %= %=
7 *
Q/
85
,PD[ FG
121
ƒ
1200 1500
Fluorescent module with electronic control gear - asymmetric optic 9019 54 W T16 1200 9020 80 W T16 1500 Fluorescent module with digital dimmable electronic (DALI) control gear - asymmetric optic 9021 54 W T16 1200 9022 80 W T16 1500 IP20
ƒ
: 7 *
& &,( ƒ
ƒ
Q/
85
,PD[ FG
ƒ 8*5
',1 $ 87( % 7 ) ) ) ) ) ) &,%6( /* / FG P DW ƒ %=
121
1200
Dark-VDU fluorescent module L≤1000cd/m2 ι 65° with electronic control gear 9027 54 W T16 1200 Dark-VDU fluorescent module 2 L≤1000cd/m ι 65° with electronic control gear and permanent emergency light with inverter 9028 54 W T16 1200 IP20
9027-9028 QC
A B C
G
2000
1.15 1.50 1.85
1000 2000
500 1000 2000
<=300 500 1000
750
<=300 500
<=300
85°
8 6 4
75° 65°
2
55°
a h
45°
102 C0-180
2
3
4
5
6
8
103
2 3 C90-270
4
5
6
8
104
cd/m2
19