V-coil by Beltracy

VC 2016

Wire Thread Inserts Filetti Riportati

Thread Repair Kits Kit Ripristina Filetti

Thread Repair Workshop Kits Kit Ripristina Filetti

Inserting Tools Utensili per il Montaggio

Tang Break Tools Attrezzi rottura codolo

Extracting Tools Estrattori

STI-Taps Maschi STI

STI-Drills Punte STI

Technical Information Informazioni tecniche

Display Espositore

COST EFFECTIVE REPAIR RATHER THAN EXPENSIVE REPLACEMENT MEGLIO RIPARARE IN MODO ECONOMICO CHE SOSTITUIRE CON COSTI PIÙ ELEVATI. In the mechanical engineering and automotive sector damaged threads such as spark plugs, bolts, oil drain screw threads, oxygen sensor or exhaust mounts lead to costly and time-intensive item exchange. For parts with damaged or defective threads there is a second chance: V-COIL Thread Insert System Worn and damaged threads can be replaced by Inserts in just four steps. They are stronger and with the same nominal diameter as before. simple handling fast installation in just four steps even in difficult to reach places durable & high quality cost & time saving Also used daily in the electrical, medical, and aerospace industry as a preventive measure.

Nel settore meccanico e automobilistico i filetti danneggiati di candele, bulloni passanti, tappi di scarico dell'olio, sonde Lambda o del supporto di scarico del tubo di scappamento comportano costose e lunghe sostituzioni. Per pezzi che riportano filetti logori, spanati o in genere danneggiati esiste una seconda opzione: Sistema a inserti filettati V-Coil Grazie all’impiego di assortimenti filettati e in sole 4 operazioni vecchi e logori filetti potranno essere completamente rigenerati tornano al vecchio diametro nominale di partenza. Facile utilizzo Facile sostituzione in sole 4 operazioni Per uso anche in luoghi ristretti Lunga durata e di elevata qualità Economico e veloce Soddisfacente per l’utilizzatore, il cliente e le macchine Utilizzabile anche per il rinforzo dei filetti in campo elettrico, medico e aerospaziale

DRILLING

FORATURA

CHECK

CONTROLLI

TAPPING

FILETTO

INSTALL THE INSERT

INTRODUZIONE DELL'INSERTO FILETTATO

Clear the damaged thread with a Standard Drill. Up to M 12 (1/2") the KITS include the correct drill. To repair a spark plug thread no pre-drilling is necessary if using the special Spark Plug Tap. Please pay attention that for Fluteless Taps bigger holes are required.

Eliminare il filetto danneggiato con una punta normale. I nostri kit includono punte fino a M12 (1/2"). Nella sostituzione di una candela non è necessario eseguire la preforatura se si usa lo speciale attrezzo combinato per foratura e taglio. Nota bene: per i maschi per laminazione sono necessari fori più grandi.

Check that thread and pitch of the tap and the bolt match.

Verificare che il maschio e il bullone abbiano lo stesso filetto e lo stesso passo.

Use the special V-COlL-Taps for cutting the holding thread into the cleared hole. It is recommended to use a suitable cutting oil.

Utilizzando gli speciali maschi V-COIL, tagliare il filetto di presa nel foro preforato. E' consigliabile l'uso di olio da taglio adeguato.

Place insert on Installation Tool and position the adjustable ring so that the insert tang is centred in the tang slot. Wind the Insert in with a light downward pressure until a half turn below the surface. Don’t work against thread direction as the tang could break.

Porre il filetto sull'attrezzo di inserimento e posizionare l'anello regolabile in modo che il perno di trascinamento si incastri nella sede dell'apertura. Avvitare quindi con una leggera pressione verso il basso fino a mezzo giro sotto la superficie. Non avvitare in senso opposto al filetto per evitare rotture del codolo.

TANG REMOVAL

ELIMINAZIONE DEL CODOLO

After finishing lift the Installation Tool and use the Tang Break Tool to remove the tang. For bigger sizes and Spark Plug Taps use Long Nose Pliers to remove the tang. Due to the narrow and exact tolerances the new thread normally is stronger than the original one.

Una volta terminato l'inserimento del filetto, estrarre l'attrezzo di inserimento ed eliminare il perno di trascinamento con l'attrezzo rottura codolo. Nel caso di grandi dimensioni e di candele utilizzare pinze lunghe per rimuovere il codolo. Grazie alle tolleranze ridotte e precise, il nuovo riletto risulta normalmente più forte dell'originale.

Application:

Applicazioni:

Thread Armour Plating. For material with low shear strenght eg. aluminum-alloys and magnesium alloys. Used in machine-building, electrical, automotive medical and aerospace industries. Thread Repair of damaged or worn-out threads. Recovery of rejected items.

Rivestimento del filetto. Per materiali teneri, pr es. Le leghe di alluminio e di magnesio. Utilizzati nella costruzione di macchine, nel settore elettrico, automotibilistico, medico ed aerospaziale. Riparazione di filetti danneggiati o usurati. Recupero di pezzi di scarto.

WIRE THREAD INSERTS FILETTI RIPORTATI

Manufactured from high quality chromium nickel stainless steel, V-Coil inserts provide high strength internal threads that resist the effects of temperature and corrosion. Their unique design ensures superior threads whose compound performance cannot be reproduced by any other single fastening method. Available in two basic forms, free running or screw locking, they are much lighter and less expensive than any other equivalent type of thread insert and because of their compact size they can generally be incorporated into existing designs where no previous provision has been made. Free Running - Type "S" Produced from precision profiled austenitic stainless steel wire wound into a helical spiral, V-Coil free running inserts have a spring like appearance. When installed, using any one of a variety of manual or automatic tools, they provide strong permanent internal threads which resist head and corrosion. Once fitted, their position is maintained by the action of radial pressure between their coils and the flanks of the tapped hole. This pressure exists because their free diameter is larger, by a calculated amount, than their installed diameter. Screw Locking - Type "SL" Screw locking (or prevailing torque) inserts are of particular value in applications subject to the effects of cyclic vibration or impact. In addition to the benefits afforded by free running inserts, V-Coil screw locking inserts offer the additional security of prevailing locking torque. This is achieved by the action of one or more polygonal grip coils positioned within the insert's length, which exert radial pressure on the male thread. Each grip coil consists of a number of tangential locking chords which protrude inside the minor diameter of the normal free running coils. As the male thread passes through these grip coils, the locking flats are displaced thus exerting radial pressure or prevailing torque on the male thread. On removal of the male thread, the locking coils relax to their original form permitting repeated assembly whilst retaining a measurable level of prevailing torque. Note: It is recommended that only close fit plated or lubricated bolts or screws are used with screw locking inserts.

I filetti V-COIL, construiti con acciaio inox al nichelcromo, sono filetti interni estremamente robusti, resistenti agli effetti della temperatura e della corrosione. Il design unico garantisce filetti di qualità superiore le cui prestazioni combinate non sono imitabili da nessun altro metodo di fissaggio singolo. Disponibili in due formati, a scorrimento libero o autofrenanti, i filetti V-COIL sono molto più leggeri e convenienti di qualsiasi altro tipo equivalente di filetto riportato. Filetti a scorrimento libero - "free running"

Prodotti da profilato di precisione in acciaio inox austenitico avvolti a spirale elicoidale, i filetti riportati V-COIL hanno l'aspetto di una molla. Una volta inserti usando un attrezzo a scelta da una selezione di utensili manuali o automatici, essi sono filetti permanenti interni resistenti al calore e alla corrosione. Quando sono posizionati, la loro posizione è mantenuta dall'azione della pressione radiale fa le bobine e i fianchi del foro filettato. Questa pressione è data dal loro diametro libero che è maggiore, di una misura calcolata, rispetto al diametro installato. Filetti autofrenanti - "screw locking" I filetti autofrenanti (o con coppia prevalente) sono particolarmente validi nelle applicazioni soggette a vibrazioni cicliche o a impatti. Oltre ai vantaggi garantiti dai filetti a scorrimento libero, i filetti autofrenanti V-COIL offrono inoltre la sicurezza della coppia frenante prevalente. Questo grazie all'azione di uno o più bobine di presa poligonali collocate sulla lunghezza dei filetti che esercitano una pressione radiale sul filetto maschio. Ciascuna bobina di presa è composta da un numero di filature di blocco che sporgono entro il diametro inferiore delle normali bobine a scorrimento libero. Quando il filetto maschio passa attraverso queste bobine di presa, si spostano i locking flats, esercitando una pressione radiale o coppia prevalente sul filetto maschio. Rimuovendo il filetto maschio, le bobine di presa tornano alla loro forma originale permettendo il montaggio ripetuto mantenendo un livello misurabile di coppia prevalente. Nota: con i filetti autofrenanti si raccomanda l'uso esclusivo di bulloni o viti close fit plated o lubrificati.

WIRE THREAD INSERTS FILETTI RIPORTATI

M / MF

Typ S

Typ SL

Typ SP

Typ LS

8-9

UNC

UNF

UNx8

BSW

BSF

G (BSP)

Refill Pack Confezioni ricarica

15 - 17

Wire Thread Inserts - Type "S" "free running", stainless steel

Filetti Riportati - tipo standard scorrimento libero, di acciaio inox

DIN 8140

Tol. ISO 2 (6H)

Nominal Diameter D M 2 x 0.4 M 2.2 x 0.45 M 2.5 x 0.45 M 3 x 0.5 M 3.5 x 0.6 M 4 x 0.7 M 5 x 0.8 M 6 x 1.0 M 7 x 1.0 M 8 x 1.25 M 8 x 1.0 M 9 x 1.25 M 10 x 1.5 M 10 x 1.25 M 10 x 1.0 M 11 x 1.5 M 12 x 1.75 M 12 x 1.5 M 12 x 1.25 M 12 x 1.0 M 14 x 2.0 M 14 x 1.5 M 14 x 1.25 M 14 x 1.0 M 16 x 2.0 M 16 x 1.5 M 18 x 2.5 M 18 x 2.0 M 18 x 1.5 M 20 x 2.5 M 20 x 2.0 M 20 x 1.5 M 22 x 2.5 M 22 x 2.0 M 22 x 1.5 M 24 x 3.0 M 24 x 2.0 M 24 x 1.5

1,0 D 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 25 25 25 25 25 25 10 10 10 10 10 10

Art.-No. 07202 07203 07204 07205 07206 07207 07208 07209 07210 07211 07212 07213 07215 07216 07217 07219 07221 07222 07223 07224 07225 07226 07227 07231 07234 07235 07236 07237 07238 07239 07240 07241 07242 07243 07244 07245 07246 07247

1,5 D Art.-No. 07302 07303 07304 07305 07306 07307 07308 07309 07310 07311 07312 07313 07315 07316 07317 07319 07321 07322 07323 07324 07325 07326 07327 07331 07334 07335 07336 07337 07338 07339 07340 07341 07342 07343 07344 07345 07346 07347

2,0 D Art.-No. 07402 07403 07404 07405 07406 07407 07408 07409 07410 07411 07412 07413 07415 07416 07417 07419 07421 07422 07423 07424 07425 07426 07427 07431 07434 07435 07436 07437 07438 07439 07440 07441 07442 07443 07444 07445 07446 07447

Wire Thread Inserts for Spark Plug Filetti Riportati per filetti della candela di accensione Nominal

8,40 mm

Diameter D M 14 x 1.25

12,40 mm

16,40 mm

Art.-No.

07128

07228

07328

2,5 D Art.-No. 07502 07503 07504 07505 07506 07507 07508 07509 07510 07511 07512 07513 07515 07516 07517 07519 07521 07522 07523 07524 07525 07526 07527 07531 07534 07535 07536 07537 07538 07539 07540 07541 07542 07543 07544 07545 07546 07547

3,0 D Art.-No. 07602 07603 07604 07605 07606 07607 07608 07609 07610 07611 07612 07613 07615 07616 07617 07619 07621 07622 07623 07624 07625 07626 07627 07631 07634 07635 07636 07637 07638 07639 07640 07641 07642 07643 07644 07645 07646 07647

Wire Thread Inserts - Type "S" "free running", stainless steel

Filetti Riportati - tipo standard scorrimento libero, di acciaio inox

DIN 8140

Tol. ISO 2 (6H)

Nominal

1,5 D

Diameter D

Art.-No.

M M M M M M M M M M M M M M M M M M M M M M M M M M M

26 x 1.5 27 x 3.0 27 x 2.0 27 x 1.5 28 x 1.5 30 x 3.5 30 x 2.0 30 x 1.5 33 x 3.5 33 x 2.0 36 x 4.0 36 x 3.0 36 x 2.0 36 x 1.5 39 x 4.0 39 x 3.0 40 x 3.0 42 x 4.5 42 x 3.0 45 x 4.5 45 x 3.0 48 x 5.0 48 x 3.0 50 x 3.0 52 x 5.0 52 x 3.0

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

07349 07350 07351 07352 07353 07354 07355 07356 07357 07358 07360 07361 07362 07363 07364 07365 07368 07372 07373 07377 07378 07382 07383 07387 07390 07391

50 50 50 50 5 5 5 5

08380 08381 08382 08383 08384 08385 08386 08387

G (BSP) 1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 5/8 x 14 3/4 x 14 7/8 x 14 1" x 11

Wire Thread Inserts - Type "S" "free running", stainless steel

Filetti Riportati - tipo standard scorrimento libero, di acciaio inox

DIN 8140

Tol. 2B

Nominal

1,0 D

Diameter D

1,5 D

2,0 D

2,5 D

3,0 D

Art.-No.

100 100 100 100 100 100 100 100 100 100 100 100 50 50 25 10 10 5 5 5 5

08200 08201 08202 08203 08204 08205 08206 08207 08208 08209 08210 08211 08212 08214 08216 08218 08219

08300 08301 08302 08303 08304 08305 08306 08307 08308 08309 08310 08311 08312 08314 08316 08318 08319 08320 08321 08322 08323

08400 08401 08402 08403 08404 08405 08406 08407 08408 08409 08410 08411 08412 08414 08416 08418 08419

08500 08501 08502 08503 08504 08505 08506 08507 08508 08509 08510 08511 08512 08514 08516 08518 08519

08600 08601 08602 08603 08604 08605 08606 08607 08608 08609 08610 08611 08612 08614 08616 08618 08619

100 100 100 100 100 100 100 100 100 50 50 25 10 10 5 5 5 5

08290 08291 08292 08293 08225 08226 08227 08228 08229 08230 08231 08233 08235 08237

08390 08391 08392 08393 08325 08326 08327 08328 08329 08330 08331 08333 08335 08337 08396 08397 08398 08399

08490 08491 08492 08493 08425 08426 08427 08428 08429 08430 08431 08433 08435 08437

08590 08591 08592 08593 08525 08526 08527 08528 08529 08530 08531 08533 08535 08537

08690 08691 08692 08693 08625 08626 08627 08628 08629 08630 08631 08633 08635 08637

UNC No. 2 x 56 No. 4 x 40 No. 5 x 40 No. 6 x 32 No. 8 x 32 No. 10 x 24 No. 12 x 24 1/4 x 20 5/16 x 18 3/8 x 16 7/16 x 14 1/2 x 13 9/16 x 12 5/8 x 11 3/4 x 10 7/8 x 9 1" x 8 1.1/8 x 7 1.1/4 x 7 1.3/8 x 6 1.1/2 x 6

UNF No. 4 x 48 No. 6 x 40 No. 8 x 36 No. 10 x 32 1/4 x 28 5/16 x 24 3/8 x 24 7/16 x 20 1/2 x 20 9/16 x 18 5/8 x 18 3/4 x 16 7/8 x 14 1" x 12 1.1/8 x 12 1.1/4 x 12 1.3/8 x 12 1.1/2 x 12

Wire Thread Inserts - Type "S" "free running", stainless steel

Filetti Riportati - tipo standard scorrimento libero, di acciaio inox

DIN 8140

Tol. 2B

Nominal

1,5 D

Diameter D

Art.-No.

UNx8 1.1/8 x 8 1.1/4 x 8 1.3/8 x 8 1.1/2 x 8 1.5/8 x 8 1.3/4 x 8 1.7/8 x 8 2" x 8

5 5 5 5 5 5 5 5

08731 08732 08733 08734 08735 08736 08737 08738

Wire Thread Inserts - Type "S" "free running", stainless steel

Filetti Riportati - tipo standard scorrimento libero, di acciaio inox

DIN 8140 Nominal

1,0 D

Diameter D

1,5 D

2,0 D

2,5 D

3,0 D

Art.-No.

100 100 100 100 100 100 100 50 50 25 10 10

08241 08242 08243 08244 08245 08246 08247 08248 08249 08251 08253 08255

08341 08342 08343 08344 08345 08346 08347 08348 08349 08351 08353 08355

08441 08442 08443 08444 08445 08446 08447 08448 08449 08451 08453 08455

08541 08542 08543 08544 08545 08546 08547 08548 08549 08551 08553 08555

08641 08642 08643 08644 08645 08646 08647 08648 08649 08651 08653 08655

100 100 100 100 100 100 50 50 25 10 10

08262 08263 08265 08266 08267 08268 08269 08270 08272 08274 08276

08362 08363 08365 08366 08367 08368 08369 08370 08372 08374 08376

08462 08463 08465 08466 08467 08468 08469 08470 08472 08474 08476

08562 08563 08565 08566 08567 08568 08569 08570 08572 08574 08576

08662 08663 08665 08666 08667 08668 08669 08670 08672 08674 08676

BSW 1/8 x 40 3/16 x 24 1/4 x 20 5/16 x 18 3/8 x 16 7/16 x 14 1/2 x 12 9/16 x 12 5/8 x 11 3/4 x 10 7/8 x 9 1" x 8

BSF 3/16 x 32 1/4 x 26 5/16 x 22 3/8 x 20 7/16 x 18 1/2 x 16 9/16 x 16 5/8 x 14 3/4 x 12 7/8 x 11 1" x 10

Wire Thread Inserts - Type "SL" Screw Locking, stainless steel red coloured

Filetti Riportati - tipo SL Autofrenanti, di acciaio inox, colore rosso

DIN 8140

Tol. ISO 2 (6H)

Nominal

1,0 D

Diameter D

1,5 D

2,0 D

Art.-No.

05205 05207 05208 05209 05211 05215 05221 05225 05234

05305 05307 05308 05309 05311 05315 05321 05325 05334

05405 05407 05408 05409 05411 05415 05421 05425 05434

M M M M M M M M M M

3 x 0.5 4 x 0.7 5 x 0.8 6 x 1.0 8 x 1.25 10 x 1.5 12 x 1.75 14 x 2.0 16 x 2.0

100 100 100 100 100 100 100 50 50

Solid Thread Inserts SP stainless steel

Inserti filettati a bussola SP in acciaio automatico zincato

Nominal M M M M

14 x1.25 14 x1.25 14 x1.25 14 x1.25

Art.-No.

Diameter D

9.5 mm 11.2 mm 12.7 mm 17.5 mm

10 10 10 10

19136 19137 19138 19139

Solid Thread Inserts LS stainless steel

inserti filetti LS

in acciaio inossidabile

Nominal Diameter D M 18 x1.5

Art.-No.

R 9.0 mm

19147

Wire Thread Inserts LS INCONEL X750

Filetti Riportati LS di INCONEL X750

Nominal Diameter D M18 x1.5

Art.-No.

R 9.0 mm

19149

Refill Pack

Wire Thread Inserts - Type “S”

Confezioni ricarica

Filetti Riportati - tipo standard

DIN 8140

Tol. ISO 2 (6H)

Nominal

Piece

Diameter D

pezzo

M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

2 x 0,4 2,2 x 0,45 2,5 x 0,45 3 x 0,5 3,5 x 0,6 4 x 0,7 5 x 0,8 6 x 1,0 7 x 1,0 8 x 1,25 8 x 1,0 9 x 1,25 10 x 1,5 10 x 1,25 10 x 1,0 11 x 1,5 12 x 1,75 12 x 1,5 12 x 1,25 12 x 1,0 14 x 2,0 14 x 1,5 14 x 1,25 14 x 1,0 16 x 2,0 16 x 1,5 18 x 2,5 18 x 2,0 18 x 1,5 20 x 2,5 20 x 2,0 20 x 1,5 22 x 2,5 22 x 2,0 22 x 1,5 24 x 3,0 24 x 2,0 24 x 1,5

10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

1,0 D

1,5 D

2,0 D

2,5 D

3,0 D

Art.-No.

40202 40203 40204 40205 40206 40207 40208 40209 40210 40211 40212 40213 40215 40216 40217 40219 40221 40222 40223 40224 40225 40226 40227 40231 40234 40235 40236 40237 40238 40239 40240 40241 40242 40243 40244 40245 40246 40247

40302 40303 40304 40305 40306 40307 40308 40309 40310 40311 40312 40313 40315 40316 40317 40319 40321 40322 40323 40324 40325 40326 40327 40331 40334 40335 40336 40337 40338 40339 40340 40341 40342 40343 40344 40345 40346 40347

40402 40403 40404 40405 40406 40407 40408 40409 40410 40411 40412 40413 40415 40416 40417 40419 40421 40422 40423 40424 40425 40426 40427 40431 40434 40435 40436 40437 40438 40439 40440 40441 40442 40443 40444 40445 40446 40447

40502 40503 40504 40505 40506 40507 40508 40509 40510 40511 40512 40513 40515 40516 40517 40519 40521 40522 40523 40524 40525 40526 40527 40531 40534 40535 40536 40537 40538 40539 40540 40541 40542 40543 40544 40545 40546 40547

40602 40603 40604 40605 40606 40607 40608 40609 40610 40611 40612 40613 40615 40616 40617 40619 40621 40622 40623 40624 40625 40626 40627 40631 40634 40635 40636 40637 40638 40639 40640 40641 40642 40643 40644 40645 40646 40647

Thread Repair Kits for spark plug thread Filetti Riportati per filetti della candela di accensione Nominal

Piece

Diameter D M 14 x 1,25

pezzo 5

8,40 mm Art.-No. 40229

12,40 mm Art.-No. 40228

16,40 mm Art.-No. 40328

Refill Pack

Wire Thread Inserts - Type “S”

Confezioni ricarica

Filetti Riportati - tipo standard

DIN 8140

Tol. 2B

Nominal

Piece

Diameter D

pezzo

1,0 D

1,5 D

2,0 D

2,5 D

3,0 D

Art.-No.

10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5

44200 44201 44202 44203 44204 44205 44206 44207 44208 44209 44210 44211 44212 44213 44216 44218 44219

44300 44301 44302 44303 44304 44305 44306 44307 44308 44309 44310 44311 44312 44314 44316 44318 44319

44400 44401 44402 44403 44404 44405 44406 44407 44408 44409 44410 44411 44412 44414 44416 44418 44419

44500 44501 44502 44503 44504 44505 44506 44507 44508 44509 44510 44511 44512 44513 44516 44518 44519

44600 44601 44602 44603 44604 44605 44606 44607 44608 44609 44610 44611 44612 44614 44616 44618 44619

10 10 10 10 10 10 5 5 5 5 5 5 5 5

44221 44222 44223 44224 44225 44226 44227 44228 44229 44230 44231 44233 44235 44237

44321 44322 44323 44324 44325 44326 44327 44328 44329 44330 44331 44333 44335 44337

44421 44422 44423 44424 44425 44426 44427 44428 44429 44430 44431 44433 44435 44437

44521 44522 44523 44524 44525 44526 44527 44528 44529 44530 44531 44533 44535 44537

44621 44622 44623 44624 44625 44626 44627 44628 44629 44630 44631 44633 44635 44637

UNC UNC No.2 UNC No.4 UNC No.5 UNC No.6 UNC No.8 UNC No.10 UNC No.12 UNC 1/4 UNC 5/16 UNC 3/8 UNC 7/16 UNC 1/2 UNC 9/16 UNC 5/8 UNC 3/4 UNC 7/8 UNC 1"

UNF UNF No.4 UNF No.6 UNF No.8 UNF No.10 UNF 1/4 UNF 5/16 UNF 3/8 UNF 7/16 UNF 1/2 UNF 9/16 UNF 5/8 UNF 3/4 UNF 7/8 UNF 1"x12

Refill Pack

Wire Thread Inserts - Type “S”

Confezioni ricarica

Filetti Riportati - tipo standard

DIN 8140 Nominal

Piece

Diameter D

pezzo

BSW

BSW BSW BSW BSW BSW BSW BSW BSW BSW BSW BSW BSW

BSF

BSF BSF BSF BSF BSF BSF BSF BSF BSF BSF BSF

1,0 D

1,5 D

2,0 D

2,5 D

3,0 D

Art.-No.

1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1"

10 10 10 10 5 5 5 5 5 5 5 5

44241 44242 44243 44244 44245 44246 44247 44248 44249 44251 44253 44255

44341 44342 44343 44344 44345 44346 44347 44348 44349 44351 44353 44355

44441 44442 44443 44444 44445 44446 44447 44448 44449 44451 44453 44455

44541 44542 44543 44544 44545 44546 44547 44548 44549 44551 44553 44555

44641 44642 44643 44644 44645 44646 44647 44648 44649 44651 44653 44655

3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1"

10 10 10 5 5 5 5 5 5 5 5

44262 44263 44265 44266 44267 44268 44269 44270 44272 44274 44276

44362 44363 44365 44366 44367 44368 44369 44370 44372 44374 44376

44462 44463 44465 44466 44467 44468 44469 44470 44472 44474 44476

44562 44563 44565 44566 44567 44568 44569 44570 44572 44574 44576

44662 44663 44665 44666 44667 44668 44669 44670 44672 44674 44676

G(BSP) G G G G

1/8 1/4 3/8 1/2

5 5 5 5

44380 44381 44382 44383

THREAD REPAIR KITS KIT RIPRISTINA FILETTI

= application flexibility = Flessibilità di utilizzo Advantages: • all tools with 1/4“ Hexagon Drive • to be used by hand or cordless powertool • no adjustment by hand while assembling • handy, even in awkward places Vantaggi: • Tutti gli utensili con attacco esagonale da ¼ • Per uso a mano o per uso con avvitatori a batteria • Nessun tipo di regolazione a mano durante l’impiego • A mano per uso anche in luoghi ristretti

= three drive changes = tre sistemi di manovra

THREAD REPAIR KITS KIT RIPRISTINA FILETTI

M / MF

V-COIL

V-COIL rapid

V-COIL Automotive

21 - 23

29 - 32

UNC

UNF

UNx8

BSW

BSF

G (BSP)

Thread Repair Kits V-COIL rapid Wire Thread Inserts 1,5 D

Kit Ripristina Filetti V-COIL rapid Filetti Riportati - tipo standard 1,5 D

Art.-No.

M M 2.5 x 0.45 M 3 x 0.5 M 4 x 0.7 M 5 x 0.8 M 6 x 1.0 M 8 x 1.25 M 10 x 1.5 M 12 x 1.75

2.6 mm 3.2 mm 4.2 mm 5.2 mm 6.3 mm 8.3 mm 10.4 mm 12.4 mm

08090 08091 08092 08093 08094 08095 08096 08097

07090 07091 07092 07093 07094 07095 07096 07097

1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

10 10 10 10 10 10 10 6

1/4" 20

04303 04305 04307 04309 04310 04312 04316 04321

Thread Repair Kits Wire Thread Inserts 1,5 D

Kit Ripristina Filetti

Filetti Riportati - tipo standard 1,5 D

Art.-No.

M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

2 x 0.4 2.5 x 0.45 3 x 0.5 3.5 x 0.6 4 x 0.7 5 x 0.8 6 x 1.0 7 x 1.0 8 x 1.25 8 x 1.0 9 x 1.25 10 x 1.5 10 x 1.25 10 x 1.0 11 x 1.5 12 x 1.75 12 x 1.5 12 x 1.25 12 x 1.0 14 x 2.0 14 x 1.5 14 x 1.25 14 x 1.0 16 x 2.0 16 x 1.5 18 x 2.5 18 x 2.0 18 x 1.5 20 x 2.5 20 x 2.0 20 x 1.5 22 x 2.5 22 x 2.0 22 x 1.5 24 x 3.0 24 x 2.0 24 x 1.5

2.1 mm 2.6 mm 3.2 mm 3.7 mm 4.2 mm 5.2 mm 6.3 mm 7.3 mm 8.3 mm 8.3 mm 9.3 mm 10.4 mm 10.3 mm 10.3 mm 11.4 mm 12.4 mm 12.4 mm 12.3 mm 12.3 mm

No. 2 No. 3 No. 4 No. 5 No. 6 No. 8 No. 9 No. 10 No. 11 No. 11 No. 12 No. 13 No. 13 No. 13 No. 14 No. 15 No. 15 No. 15 No. 15 No. 16 No. 16 No. 17 No. 17 No. 18 No. 18 No. 20 No. 20 No. 20 No. 21 No. 21 No. 21 No. 22 No. 22 No. 22 No. 23 No. 23 No. 23

No. 2 No. 3 No. 4 No. 5 No. 6 No. 8 No. 9 No. 11 No. 11 No. 11 No. 12 No. 13 No. 13 No. 13 No. 14 No. 15 No. 15 No. 15 No. 15

20 20 20 20 20 20 20 20 20 20 15 15 15 15 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5

04001 04003 04005 04006 04007 04009 04010 04011 04012 04013 04014 04016 04017 04018 04019 04021 04022 04023 04024 04028 04029 04030 04031 04032 04033 04034 04035 04036 04037 04038 04039 04040 04041 04042 04043 04044 04045

Thread Repair Kits

STI-taps, sets of 2 pcs. Inserting Tool with Hexagon Drive Wire Thread Inserts 1,5 D

Kit Ripristina Filetti

Maschi STI, set di 2 pz. Utensile per il Montaggio con attacco esagonale Filetti Riportati - tipo standard 1,5 D

Size

Art.-No.

M M M M M M M M M M M M M M M M M M M M M M M M M M M

03049 03050 03051 03052 03053 03054 03055 03056 03057 03058 03060 03061 03062 03063 03064 03065 03066 03067 03068 03069 03070 03071 03072 03073 03074 03075

08024 08025 08026 08027 08028 08029 08030 08031 08032 08033 08034 08035 08036 08037 08038 08039 08040 08041 08042 08043 08044 08045 08046 08047 08048 08049

07349 07350 07351 07352 07353 07354 07355 07356 07357 07358 07360 07361 07362 07363 07364 07365 07368 07372 07373 07377 07378 07382 07383 07387 07390 07391

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

04049 04050 04051 04052 04053 04054 04055 04056 04057 04058 04060 04061 04062 04063 04231 04232 04233 04234 04235 04236 04237 04238 04239 04240 04241 04242

Thread Repair Kits

with Machine Inserting Tool and STI-Machine Tap (Spiral Point)

Kit Ripristina Filetti

con utensile per il montaggio a macchina e Maschi STI a Macchina (Forma B)

Art.-No.

M M 3 x 0.5 M 4 x 0.7 M 5 x 0.8 M 6 x 1.0 M 8 x 1.25 M 10 x 1.5 M 12 x 1.75

3.2 mm 4.2 mm 5.2 mm 6.3 mm 8.3 mm 10.4 mm 12.4 mm

No. 4 No. 6 No. 8 No. 9 No. 11 No. 13 No. 15

20 20 20 20 20 15 10

04070 04071 04072 04073 04074 04075 04076

Thread Repair Kits Wire Thread Inserts 1,5 D

Kit Ripristina Filetti

Filetti Riportati - tipo standard 1,5 D

Art.-No

UNC No. 2 x 56 No. 4 x 40 No. 5 x 40 No. 6 x 32 No. 8 x 32 No. 10 x 24 No. 12 x 24 1/4 x 20 5/16 x 18 3/8 x 16 7/16 x 14 1/2 x 13 9/16 x 12 5/8 x 11 3/4 x 10 7/8 x 9 1" x 8

2.4 mm 3.1 mm 3.4 mm 3.8 mm 4.4 mm 5.2 mm 5.8 mm 6.7 mm 8.3 mm 9.9 mm 11.6 mm 13.0 mm

No. 2 No. 4 No. 4 No. 5 No. 6 No. 7 No. 8 No. 9 No. 10 No. 12 No. 14 No. 15 No. 16 No. 18 No. 20 No. 22 No. 23

No. 2 No. 4 No. 4 No. 5 No. 6 No. 6 No. 8 No. 9 No. 10 No. 12 No. 14 No. 15

20 20 20 20 20 20 20 20 20 15 10 10 10 10 5 5 4

04100 04101 04106 04102 04103 04104 04105 04107 04108 04109 04110 04111 04112 04113 04114 04115 04116

Thread Repair Kits

STI-taps, sets of 2 pcs. Inserting Tool with Hexagon Drive Wire Thread Inserts 1,5 D

Kit Ripristina Filetti

Maschi STI, set di 2 pz. Utensile per il Montaggio con attacco esagonale Filetti Riportati - tipo standard 1,5 D Size

Art.-No.

Dimensioni

UNC 1.1/8" x 7 1.1/4" x 7 1.3/8" x 6 1.1/2" x 6

03117 03118 03119 03120

08050 08051 08052 08053

08320 08321 08322 08323

10 10 10 10

04117 04118 04119 04135

Thread Repair Kits Wire Thread Inserts 1,5 D

Kit Ripristina Filetti

Filetti Riportati - tipo standard 1,5 D

Art.-No.

UNF No. 4 x 48 No. 6 x 40 No. 8 x 36 No. 10 x 32 1/4 x 28 5/16 x 24 3/8 x 24 7/16 x 20 1/2 x 20 9/16 x 18 5/8 x 18 3/4 x 16 7/8 x 14 1" x 12

3.0 mm 3.8 mm 4.4 mm 5.1 mm 6.7 mm 8.3 mm 9.8 mm 11.5 mm 13.0 mm

No. 4 No. 5 No. 6 No. 8 No. 9 No. 11 No. 13 No. 14 No. 15 No. 16 No. 18 No. 21 No. 22 No. 23

No. 4 No. 5 No. 6 No. 8 No. 9 No. 11 No. 13 No. 14 No. 15

20 20 20 20 20 20 15 10 10 10 10 5 5 4

04120 04121 04122 04123 04125 04126 04127 04128 04129 04130 04131 04132 04133 04134

Thread Repair Kits

STI-taps, sets of 2 pcs. Inserting Tool with Hexagon Drive Wire Thread Inserts 1,5 D

Kit Ripristina Filetti

Maschi STI, set di 2 pz. Utensile per il Montaggio con attacco esagonale Filetti Riportati - tipo standard 1,5 D Size

Art.-No.

Dimensioni

UNF 1.1/8" x 12 1.1/4" x 12 1.3/8" x 12 1.1/2" x 12

03166 03167 03168 03169

08060 08061 08062 08063

08396 08397 08398 08399

10 10 10 10

04136 04137 04138 04139

Thread Repair Kits

STI-taps, sets of 2 pcs. Inserting Tool with Hexagon Drive Wire Thread Inserts 1,5 D

Kit Ripristina Filetti

Maschi STI, set di 2 pz. Utensile per il Montaggio con attacco esagonale Filetti Riportati - tipo standard 1,5 D

Size

Art.-No.

Dimensioni

UNx8 1.1/8 x 8 1.1/4 x 8 1.3/8 x 8 1.1/2 x 8 1.5/8 x 8 1.3/4 x 8 1.7/8 x 8 2" x 8

03191 03192 03193 03194 03195 03196 03197 03198

08741 08742 08743 08744 08745 08746 08747 08748

08731 08732 08733 08734 08735 08736 08737 08738

10 10 10 10 10 10 10 10

04731 04732 04733 04734 04735 04736 04737 04738

Thread Repair Kits Wire Thread Inserts 1,5 D

Kit Ripristina Filetti

Filetti Riportati - tipo standard 1,5 D

Art.-No.

BSW 1/8 x 40 3/16 x 24 1/4 x 20 5/16 x 18 3/8 x 16 7/16 x 14 1/2 x 12 9/16 x 12 5/8 x 11 3/4 x 10 7/8 x 9 1" x 8

BSF

3/16 x 32 1/4 x 26 5/16 x 22 3/8 x 20 7/16 x 18 1/2 x 16 9/16 x 16 5/8 x 14 3/4 x 12 7/8 x 11 1" x 10

3.4 mm 5.0 mm 6.7 mm 8.3 mm 9.9 mm 11.5 mm 13.0 mm

No. 4 No. 8 No. 9 No. 10 No. 12 No. 14 No. 15 No. 16 No. 18 No. 20 No. 22 No. 23

No. 4 No. 8 No. 9 No. 11 No. 12 No. 14 No. 15

20 20 20 20 15 10 10 10 10 5 5 4

04141 04142 04143 04144 04145 04146 04147 04148 04149 04150 04151 04152

5.0 mm 6.6 mm 8.3 mm 9.9 mm 11.5 mm 13.0 mm

No. 7 No. 9 No. 11 No. 13 No. 14 No. 15 No. 16 No. 18 No. 20 No. 22 No. 23

No. 6 No. 9 No. 11 No. 13 No. 14 No. 15

20 20 20 15 10 10 10 10 5 5 4

04162 04163 04165 04166 04167 04168 04169 04170 04172 04174 04176

Thread Repair Kits

STI-taps, sets of 2 pcs. Inserting Tool with Hexagon Drive Wire Thread Inserts 1,5 D

Kit Ripristina Filetti

Maschi STI, set di 2 pz. Utensile per il Montaggio con attacco esagonale Filetti Riportati - tipo standard 1,5 D

Size

Art.-No.

Dimensioni

G (BSP) G 1/8 x 28 G 1/4 x 19 G 3/8 x 19 G 1/2 x 14 G 5/8 x 14 G 3/4 x 14 G 7/8 x 14 G 1" x 11

03311 03312 03313 03314 03315 03316 03318 03317

08080 08081 08082 08083 08084 08085 08086 08087

08380 08381 08382 08383 08384 08385 08386 08387

10 10 10 10 10 10 10 10

04190 04191 04192 04193 04194 04195 04196 04197

Thread Repair Kits

for spark plug threads Wire Thread Inserts STI-Spark Plug Taps with Pilot Nose

Kit Ripristina Filetti

per filetti della candela di accensione Filetti Riportati Maschi combinati STI

Art.-No. M 6 x 1.0 M 8 x 1.25 M 10 x 1.5 M 10 x 1.25 M 10 x 1.0 M 12 x 1.25 M 14 x 1.25 M 18 x 1.5

No. 9 No. 11 No. 13 No. 13 No. 13 No. 15 No. 17 No. 20

1,5 D 10 10 10 10 10 10

8,40 mm

5 5

12,40 mm

16,40 mm

04090 04091 04092 04093 04094 04095 04096 04097

Thread Repair Kits

for spark plug thread M 14x1,25 HexTap SP Solid Thread Inserts SP

Kit Ripristina Filetti

per filetti della candela di accensione M 14x1,25 HexTap SP inserti filetti SP

Art.-No. 9,5 mm 16-XL 16-2M 16-4 16-2L 10-S 10-M 10-L 10-XL 10-2L

M 16 x 1.25 M 16 x 1.25 M 16 x 1.25 M 16 x 1.25 M 16 x 1.25 M 16 x 1.25 M 16 x 1.25 M 16 x 1.25 M 16 x 1.25

5 4

11,2 mm

12,7 mm 11 4 8

17,5 mm 16 4 8

10 10 10 5

10 5

19111 19112 19113 19114 19115 19116 19117 19118 19119

Oil Sump Repair Kits

for oil drain screw threads HexTap OS, screws and retainer ring

Gamma riparazione coppa olio

per filetti do parafuso de drenagem do Ă˛leo HexTap OS, viti e anelli di tenuta

Art.-No. M 13 x 1.5 M 15 x 1.5 M 17 x 1.5 M 20 x 1.5 M 24 x 1.5

15 15 15 5 5

CU 15 15 15 10 10

Alu

10 10

19125 19126 19127 19128 19129

Thread Repair Kits

for oxygen sensor thread M 18x1,5 HexTap LS and LSN Wire Inserts LS Inconel X750 (19149), Solid Inserts LS (19147)

Kit Ripristina Filetti

per filetti sonda Lambda M 18x1,5 HexTap LS e LSN Filetti Riportati LS Inconel X750 (19149) inserti filetti LS (19147)

Art.-No. 10E 5EB 10B

LSN M 18 x 1.5 M 18 x 1.5 M 18 x 1.5

LS M 20 x 1.5 M 20 x 1.5 M 20 x 1.5

19147 5 10

19149 10 5

19102 19104 19106

THREAD REPAIR WORKSHOP KITS KIT RIPRISTINA FILETTI

V-COIL

BSW/BSF

UNC/UNF

34 - 35

V-COIL rapid

with Machine Inserting Tool con utensile per il montaggio a macchina

38 38

V-COIL Automotive

39 39

Thread Repair Workshop Kits Kit Ripristina Filetti

Art.-No.

VC80 / M 5 - M 12 M 5 x 0.8 5.2 mm M 6 x 1.0 6.3 mm M 8 x 1.25 8.3 mm M 10 x 1.5 10.4 mm M 12 x 1.75 12.4 mm

No. 8 No. 9 No. 11 No. 13 No. 15

1,0

1,5

2,0

10 10 10 10 5

04080

Thread Repair Workshop Kits Kit Ripristina Filetti

Art.-No.

VC81 / M 5 - M 12 M 5 x 0.8 M 6 x 1.0 M 8 x 1.25 M 10 x 1.5 M 12 x 1.75

04081 5.2 mm 6.3 mm 8.3 mm 10.4 mm 12.4 mm

No. 8 No. 9 No. 11 No. 13 No. 15

25 25 25 25 10

VC82 / M 6 - M 14 x 1.25 / NP M 6 x 1.0 6.3 mm M 8 x 1.25 8.3 mm M 10 x 1.5 10.4 mm M 12 x 1.75 12.4 mm M 14 x 1.25

No. 9 No. 11 No. 13 No. 15 No. 17

No. 9 No. 11 No. 13 No. 15

25 25 25 10 10

No. 9 No. 11 No. 13 No. 15

25 25 25 10 10

No. 9 No. 11 No. 13

25 25 25

04082

VC83 / M 6 - M 14 x 1.25 / PT (*Spark Plug / per candele) M 6 x 1.0 6.3 mm No. 9 M 8 x 1.25 8.3 mm No. 11 M 10 x 1.5 10.4 mm No. 13 M 12 x 1.75 12.4 mm No. 15 M 14 x 1.25* No. 17 VC85 / M 6 - M 10 M 6 x 1.0 M 8 x 1.25 M 10 x 1.5

04083

04085 6.3 mm 8.3 mm 10.4 mm

No. 9 No. 11 No. 13

Thread Repair Workshop Kits V-COIL rapid Wire Thread Inserts 1,5 D

Kit Ripristina Filetti V-COIL rapid Filetti Riportati - tipo standard 1,5 D

Art.-No.

VC381 / M 5 - M 12 M 5 x 0.8 5.2 mm M 6 x 1.0 6.3 mm M 8 x 1.25 8.3 mm M 10 x 1.5 10.4 mm M 12 x 1.75 12.4 mm

08093 08094 08095 08096 08097

07093 07094 07095 07096 07097

1/4" 1/4" 1/4" 1/4" 1/4"

10 10 10 10 10

VC385 / M 6 - M 10 M 6 x 1.0 6.3 mm M 8 x 1.25 8.3 mm M 10 x 1.5 10.4 mm

08094 08095 08096

07094 07095 07096

1/4" 1/4" 1/4"

10 10 10

04381

04385

1/4"

Thread Repair Workshop Kits Wire Thread Inserts 1,5 D

Kit Ripristina Filetti

Filetti Riportati - tipo standard 1,5 D

Art.-No.

UNC 1/4 - 1/2" UNC 1/4 x 20 UNC 5/16 x 18 UNC 3/8 x 16 UNC 7/16 x 14 UNC 1/2 x 13

6.7 mm 8.3 mm 9.9 mm 11.6 mm 13.0 mm

No. 9 No. 10 No. 12 No. 14 No. 15

No. 9 No. 11 No. 12 No. 14 No. 15

25 25 25 10 10

UNF 1/4 - 1/2" UNF 1/4 x 28 UNF 5/16 x 24 UNF 3/8 x 24 UNF 7/16 x 20 UNF 1/2 x 20

6.7 mm 8.3 mm 9.8 mm 11.5 mm 13.0 mm

No. 9 No. 11 No. 13 No. 14 No. 15

25 25 25 10 10

BSW 1/4 - 1/2" BSW 1/4 x 20 BSW 5/16 x 18 BSW 3/8 x 16 BSW 7/16 x 14 BSW 1/2 x 12

6.7 mm 8.3 mm 9.9 mm 11.5 mm 13.0 mm

No. 9 No. 10 No. 12 No. 14 No. 15

No. 9 No. 11 No. 12 No. 14 No. 15

25 25 25 10 10

BSF 1/4 - 1/2" BSF 1/4 x 26 BSF 5/16 x 22 BSF 3/8 x 20 BSF 7/16 x 18 BSF 1/2 x 16

6.6 mm 8.3 mm 9.9 mm 11.5 mm 13.0 mm

No. 9 No. 11 No. 12 No. 14 No. 15

25 25 25 10 10

04184

04185

04186

04187

Thread Repair Workshop Kits with Machine Inserting Tools and STI-Machine Taps (Spiral Point)

Kit Ripristina Filetti

con utensile per il montaggio a macchina e Maschi STI a Macchina con imbocco corretto

Art.-No.

VC87 / M 5 - M 12 M 5 x 0.8 M 6 x 1.0 M 8 x 1.25 M 10 x 1.5 M 12 x 1.75

04087 5.2 mm 6.3 mm 8.3 mm 10.4 mm 12.4 mm

M 5 M 6 M 8 M 10 M 12

No. 8 No. 9 No. 11 No. 13 No. 15

25 25 25 25 10

Oil Sump Repair Workshop Kits for oil drain screw threads HexTap OS, screws and retainer ring

Gamma riparazione coppa olio

per filetti do parafuso de drenagem do Ă˛leo HexTap OS, viti e anelli di tenuta

Art.-No. CU OS 20 M 13 x 1.5 M 15 x 1.5 M 17 x 1.5

5 5 5

10 10 10

OS 21 M 20 x 1.5 M 24 x 1.5

5 5

10 10

OS 22 M 13 x 1.5 M 15 x 1.5 M 17 x 1.5 M 20 x 1.5 M 24 x 1.5

3 3 3 3 3

Alu 19120

19121 10 10 19122

3 3

INSERTING TOOLS UTENSILI PER IL MONTAGGIO

Advantages: • easy handling • one tool for various dimensions Vantaggi: • Facile utilizzo • Un unico utensile per più grandezze

Advantages: • with Hexagon Drive • to be used by hand or cordless powertool • no adjustment by hand while assembling • handy, even in awkward places Vantaggi: • Con attacco esagonale • Per uso a mano o per uso con avvitatori a batteria • Nessun tipo di regolazione a mano durante l’impiego • A mano per uso anche in luoghi ristretti

INSERTING TOOLS UTENSILI PER IL MONTAGGIO

Inserting Tools with locking ring Utensili per il Montaggio manuale con anello d'arresto Inserting Tools with Hexagon Drive Utensile per il Montaggio con attacco esagonale

43 - 44

Machine Inserting Tool Utensile per il Montaggio a Macchina

Tang Break Tools Attrezzi rottura codolo

Extracting Tools Estrattori

Inserting Tools with locking ring

Utensili per il Montaggio manuale con anello d'arresto

Metric

UNC / UNF

Metrico

BSW / BSF

M 2 x 0.4 M 2.2 x 0.45

UNC

M 2.5 x 0.45

No.

Art.No.

No. 2

08002 08003

3 x 0.5

UNC No. 5 UNC/UNF No. 4

M 3.5 x 0.6

UNC/UNF No. 6

08005

UNC/UNF BSW 3/16 UNC UNF UNC UNC/UNF BSW/BSF

No. 8

08006

No. 10 No. 10 No. 12 1/4 1/4

08007

4 x 0.7

7 8

5 x 0.8

6 x 1.0

M M M M M M M M M M M M M M M M M M M M M M M M M

7 x 1.0 8 x 1.25 8 x 1.0 9 x 1.25 9 x 1.0 10 x 1.5 10 x 1.0 11 x 1.5 11 x 1.25 12 x 1.75 12 x 1.25 14 x 2.0 14 x 1.5 14 x 1.25 14 x 1.0 16 x 2.0 16 x 1.5 18 x 2.5 18 x 2.0 20 x 2.5 20 x 2.0 22 x 2.5 22 x 2.0 24 x 3.0 24 x 2.0

11 12 13 14 15 16 17 18 20 21 22 23

M 10 x 1.25

M 12 x 1.5 M 12 x 1.0

BSW 1/8

BSF 3/16

08004

08008 08009

UNC/BSW 5/16

08010

UNF/BSF 5/16

08011

UNC/BSW 3/8

08012

UNF/BSF UNC/UNF BSW/BSF UNC/UNF BSW/BSF UNC/UNF BSW/BSF

3/8 7/16 7/16 1/2 1/2 9/16 9/16

08013

UNC/UNF BSW/BSF UNC BSW/BSF

5/8 5/8 3/4 3/4

UNF UNC/UNF BSW/BSF UNC/UNF BSW/BSF

3/4 7/8 7/8 1" 1"

08014 08015 08016 08017

M 18 x 1.5 M 20 x 1.5 M 22 x 1.5 M 24 x 1.5

08018 08020 08021 08022 08023

Inserting Tools with Hexagon Drive

Utensile per il Montaggio con attacco esagonale

Nominal

Art.No.

Diameter D

M 2.5 x 0.45 M 3 x 0.5 M 4 x 0.7 M 5 x 0.8 M 6 x 1.0 M 8 x 1.25 M 10 x 1.5 M 12 x 1.75 M 26 x 1.5 M 27 x 3.0 M 27 x 2.0 M 27 x 1.5 M 28 x 1.5 M 30 x 3.5 M 30 x 2.0 M 30 x 1.5 M 33 x 3.5 M 33 x 2.0 M 36 x 4.0 M 36 x 3.0 M 36 x 2.0 M 36 x 1.5 M 39 x 4.0 M 39 x 3.0 M 40 x 3.0 M 42 x 4.5 M 42 x 3.0 M 45 x 4.5 M 45 x 3.0 M 48 x 5.0 M 48 x 3.0 M 50 x 3.0 M 52 x 5.0 M 52 x 3.0

G (BSP) 1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 5/8 x 14 3/4 x 14 7/8 x 14 1" x 11

1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4"

08090 08091 08092 08093 08094 08095 08096 08097 08024 08025 08026 08027 08028 08029 08030 08031 08032 08033 08034 08035 08036 08037 08038 08039 08040 08041 08042 08043 08044 08045 08046 08047 08048 08049

1/4" 1/4" 1/4" 1/4" 1/2" 1/2" 1/2" 1/2"

08080 08081 08082 08083 08084 08085 08086 08087

Inserting Tools with Hexagon Drive

Utensile per il Montaggio con attacco esagonale

Nominal

Art.No.

Diameter D

UNC

1.1/8 x 7.0 1.1/4 x 7.0 1.3/8 x 6.0 1.1/2 x 6.0

UNF

1.1/8 x 12 1.1/4 x 12 1.3/8 x 12 1.1/2 x 12

UNx8

1.1/8 x 8 1.1/4 x 8 1.3/8 x 8 1.1/2 x 8 1.5/8 x 8 1.3/4 x 8 1.7/8 x 8 2" x 8

1/2" 1/2" 1/2" 1/2"

08050 08051 08052 08053

1/2" 1/2" 1/2" 1/2"

08060 08061 08062 08063

1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4"

08741 08742 08743 08744 08745 08746 08747 08748

Machine Inserting Tool with 1/4" Hexagon Drive

Utensile per il Montaggio a Macchina con attacco esagonale 1/4"

Nominal

Art.No.

Diameter D

M 3 x 0.5 M 4 x 0.7 M 5 x 0.8 M 6 x 1.0 M 8 x 1.25 M 10 x 1.5 M 12 x 1.75

46 56 62 76 85 96 107

6 7 8 10 12 14 16

1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

08070 08071 08072 08073 08074 08075 08076

Tang Break Tools Attrezzi rottura codolo

No.

Metric

UNC / UNF

Metrico M 2.2 x 0.45

BSW / BSF UNC No. 2

M 8 x 1.25 M 9 x 1.25

UNC/UNF UNC/UNF UNC UNC/UNF UNF UNC UNC/UNF UNC/UNF BSW/BSF UNC

No. 4 No. 6 No. 10 No. 8 No. 10 No. 12 1/4 5/16 5/16 3/8

M 10 x 1.25 M 11 x 1.25 M 12 x 1.5 M 12 x 1.0

UNF UNC/UNF UNC/UNF BSW/BSF

3/8 7/16 1/2 1/2

2 3 4 5

M 2 x 0.4 M 2.5 x 0.45 M 3 x 0.5 M 3.5 x 0.6

4 x 0.7

8 9

M M M M M M M M M M

5 x 0.8 6 x 1.0 7 x 1.0 8 x 1.0 9 x 1.0 10 x 1.5 10 x 1.0 11 x 1.5 12 x 1.75 12 x 1.25

11 12 13 14 15

V-COIL rapid 3 M 2,5 x 0.45 4 M 3 x 0.5 6 M 4 x 0.7 8 M 5 x 0.8 9 M 6 x 1.0 11 M 8 x 1.25 13 M 10 x 1.5 15 M 12 x 1.75

1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

Art.No. 07002 07003 07004 07005 BSF 3/16

07006

BSW 3/16 BSW/BSF 1/4

07008 07009

BSW/BSF 3/8

07011 07012

BSW/BSF 7/16

07013 07014 07015

07090 07091 07092 07093 07094 07095 07096 07097

Extracting Tools Estrattori

No.

Metric

Inch

Metrico

pollice

3/16 - 3/8

07052

M 11 - M 24

3/8 - 1"

07053

3 - M 10

Art.-No.

STI-TAPS MASCHI STI

M MF

BSW BSF

UNC UNF UNX8

G BSP

Second Lead (Form D) Imbocco Forma D

Sets of 2 pcs. Set di 2 pz.

Spiral Point Imbocco coretto

Spiral Flute Elicoidali

Spark Plug Taps Maschi combinati STI per candele

Fluteless Taps Maschi a rullare

STI-Drills Punte STI

V-COIL rapid + AUTOMOTIVE STI-Taps Maschi STI

STI-Drills Punte STI

HexTap OS

HexTap SP

HexTap LS

60 60 60

Oil Drain Screws Tappo di scarico dell'olio

Retainer Ring OS anelli di tenuta

STI-Taps (Second Lead)

for Wire-Thread-Inserts ISO 2 (6H)

Maschi STI

per inserti riportati dopo ISO 2 (6H)

Form D Nominal Diameter D M 2 M 2.5 M 3 M 3.5 M 4 M 5 M 6 M 7 M 8 M 8 M 9 M 10 M 10 M 10 M 11 M 12 M 12 M 12 M 12 M 14 M 14 M 14 M 14 M 16 M 16 M 18 M 18 M 18 M 20 M 20 M 20 M 22 M 22 M 22 M 24 M 24 M 24

HSS-G

Tol. ISO1 (4H)

x 0.40 x 0.45 x 0.5 x 0.6 x 0.7 x 0.8 x 1.0 x 1.0 x 1.25 x 1.0 x 1.25 x 1.5 x 1.25 x 1.0 x 1.5 x 1.75 x 1.5 x 1.25 x 1.0 x 2.0 x 1.5 x 1.25 x 1.0 x 2.0 x 1.5 x 2.5 x 2.0 x 1.5 x 2.5 x 2.0 x 1.5 x 2.5 x 2.0 x 1.5 x 3.0 x 2.0 x 1.5

2.5 3.1 3.6 4.3 4.9 6.0 7.3 8.3 9.6 9.3 10.6 11.9 11.6 11.3 12.9 14.3 14.0 13.6 13.3 16.6 16.0 15.6 15.3 18.6 18.0 21.3 20.6 20.0 23.3 22.6 22.0 25.3 24.6 24.0 27.9 26.6 26.0

44.5 48.0 53.0 53.0 58.0 66.0 72.0 72.0 80.0 80.0 85.0 89.0 85.0 85.0 89.0 95.0 95.0 95.0 95.0 102.0 102.0 102.0 102.0 112.0 104.0 118.0 104.0 104.0 118.0 113.0 113.0 130.0 120.0 120.0 138.0 127.0 120.0

9.5 11.0 13.0 13.0 16.0 19.0 22.0 22.0 24.0 24.0 25.0 29.0 25.0 25.0 29.0 30.0 30.0 30.0 30.0 32.0 32.0 32.0 32.0 37.0 29.0 38.0 29.0 29.0 38.0 33.0 33.0 45.0 35.0 35.0 48.0 37.0 35.0

2.8 3.15 4.0 4.5 5.0 6.3 8.0 9.0 10.0 10.0 8.0 9.0 8.0 8.0 9.0 11.2 11.2 11.2 11.2 12.5 12.5 12.5 12.5 14.0 14.0 16.0 14.0 14.0 16.0 16.0 16.0 18.0 18.0 18.0 20.0 20.0 18.0

Art.-No. 2.24 2.50 3.15 3.55 4.00 5.00 6.30 7.10 8.00 8.00 6.30 7.10 6.30 6.30 7.10 9.00 9.00 9.00 9.00 10.00 10.00 10.00 10.00 11.20 11.20 12.50 11.20 11.20 12.50 12.50 12.50 14.00 14.00 14.00 16.00 16.00 14.00

03001 03003 03005 03006 03007 03008 03009 03010 03011 03012 03013 03015 03016 03017 03018 03020 03021 03022 03023 03027 03028 03029 03030 03033 03034 03035 03036 03037 03038 03039 03040 03041 03042 03043 03044 03045 03046

STI-Taps, set of 2 pcs.

for Wire-Thread-Inserts ISO 2 (6H)

Maschi STI, Set di 2 pz.

per inserti riportati dopo ISO 2 (6H)

Nominal Diameter D M 26 M 27 M 27 M 27 M 28 M 30 M 30 M 30 M 33 M 33 M 36 M 36 M 36 M 36 M 39 M 39 M 40 M 42 M 42 M 45 M 45 M 48 M 48 M 50 M 52 M 52

HSS-G

Tol. ISO1 (4H)

x 1.5 x 3.0 x 2.0 x 1.5 x 1.5 x 3.5 x 2.0 x 1.5 x 3.5 x 2.0 x 4.0 x 3.0 x 2.0 x 1.5 x 4.0 x 3.0 x 3.0 x 4.5 x 3.0 x 4.5 x 3.0 x 5.0 x 3.0 x 3.0 x 5.0 x 3.0

28.0 30.9 29.6 29.0 30.0 34.6 32.6 32.0 37.6 35.6 41.2 39.9 38.6 38.0 44.2 42.9 43.9 47.9 45.9 50.9 48.9 54.5 51.9 53.9 58.5 55.9

127 151 127 127 127 162 137 137 162 144 170 170 150 150 187 149 149 187 165 200 175 200 175 175 221 193

37 51 37 37 37 57 37 37 57 37 60 60 39 39 67 39 39 67 45 70 45 70 45 45 76 48

20.0 22.4 20.0 20.0 20.0 25.0 22.4 22.4 25.0 25.0 28.0 28.0 28.0 28.0 31.5 28.0 28.0 31.5 31.5 35.5 35.5 35.5 35.5 35.5 40.0 40.0

Art.-No. 16.0 18.0 16.0 16.0 16.0 20.0 18.0 18.0 20.0 20.0 22.4 22.4 22.4 22.4 28.0 26.0 26.0 28.0 28.0 31.0 31.0 31.0 31.0 31.0 34.0 34.0

03049 03050 03051 03052 03053 03054 03055 03056 03057 03058 03060 03061 03062 03063 03064 03065 03066 03067 03068 03069 03070 03071 03072 03073 03074 03075

STI-Taps (Second Lead)

for Wire-Thread-Inserts Tolerance 2B

Maschi STI

per inserti riportati dopo tolleranza 2B

Form D Nominal

HSS-G

UNC/UNF

Tol. 3B

Art.-No.

2.8 3.7 4.0 4.5 5.2 6.2 6.9 8.0 9.8 11.6 13.5 15.2 17.0 18.9 22.4 25.9 29.5

48.0 53.0 53.0 58.0 62.0 66.0 66.0 72.0 80.0 85.0 95.0 102.0 112.0 112.0 118.0 130.0 138.0

10.0 13.0 13.0 16.0 17.0 19.0 19.0 22.0 24.0 25.0 30.0 32.0 37.0 37.0 38.0 45.0 48.0

3.15 4.0 4.0 5.0 5.6 6.3 7.1 8.0 10.0 8.0 11.2 12.5 14.0 14.0 16.0 18.0 20.0

2.5 3.15 3.15 4.00 4.50 5.00 5.60 6.30 8.00 6.30 9.00 10.00 11.20 11.20 12.50 14.00 16.00

03100 03101 03102 03103 03104 03105 03106 03107 03108 03109 03110 03111 03112 03113 03114 03115 03116

3.5 4.3 5.1 5.9 7.5 9.3 10.9 12.8 14.4 16.1 17.7 21.1 24.6 28.2 27.8

53.0 53.0 62.0 66.0 69.0 76.0 82.0 84.0 90.0 104.0 104.0 104.0 120.0 127.0 127.0

13.0 13.0 17.0 19.0 19.0 20.0 22.0 24.0 25.0 29.0 29.0 29.0 35.0 37.0 37.0

4.0 4.5 5.6 6.3 8.0 10.0 8.0 9.0 11.2 12.5 14.0 14.0 18.0 20.0 20.0

3.15 3.55 4.50 5.00 6.30 8.00 6.30 7.10 9.00 10.00 11.20 11.20 14.00 16.00 16.00

03151 03152 03153 03154 03155 03156 03157 03158 03159 03160 03161 03162 03163 03164 03165

Diameter D

UNC/NC No. 2 x 56 No. 4 x 40 No. 5 x 40 No. 6 x 32 No. 8 x 32 No. 10 x 24 No. 12 x 24 1/4 x 20 5/16 x 18 3/8 x 16 7/16 x 14 1/2 x 13 9/16 x 12 5/8 x 11 3/4 x 10 7/8 x 9 1" x 8

UNF/NF

No. 4 x 48 No. 6 x 40 No. 8 x 36 No. 10 x 32 1/4 x 28 5/16 x 24 3/8 x 24 7/16 x 20 1/2 x 20 9/16 x 18 5/8 x 18 3/4 x 16 7/8 x 14 1" x 12 1" x 14

STI-Taps, sets of 2 pcs.

for Wire-Thread-Inserts Tolerance 2B

Maschi STI, Set di 2 pz.

per inserti riportati dopo tolleranza 2B

HSS-G Nominal

UNC/UNF

Tol. 3B B

Art.-No.

33.3 36.5 40.4 43.6

151 162 170 187

51 57 60 67

22.4 25.0 28.0 31.5

18.0 20.0 22.4 25.0

03117 03118 03119 03120

31.3 34.5 37.7 40.9

137 144 150 150

37 39 39 39

22.4 25.0 28.0 28.0

18.0 20.0 22.4 22.4

03166 03167 03168 03169

1.1/4 1.3/8 1.1/2 1.5/8 1.3/4 1.7/8 2" 2.1/8

151 162 170 170 187 187 200 200

51 57 60 60 67 67 70 70

22.4 25.0 28.0 28.0 31.5 31.5 35.5 35.5

18.0 20.0 22.4 22.4 25.0 25.0 28.0 28.0

03191 03192 03193 03194 03195 03196 03197 03198

Diameter D

UNC/NC 1.1/8 x 7 1.1/4 x 7 1.3/8 x 6 1.1/2 x 6

UNF/NF 1.1/8 x 12 1.1/4 x 12 1.3/8 x 12 1.1/2 x 12

UNx8

1.1/8 x 8 1.1/4 x 8 1.3/8 x 8 1.1/2 x 8 1.5/8 x 8 1.3/4 x 8 1.7/8 x 8 2" x 8

STI-Taps (Second Lead) for Wire-Thread-Inserts

Maschi STI

per inserti riportati

Form D Nominal

BSW/BSF

HSS-G B

Art.-No.

3.9 6.0 7.8 9.6 11.4 13.2 15.2 16.8 18.6 20.2 22.0 25.5 29.1

53.0 56.0 72.0 80.0 85.0 95.0 102.0 102.0 112.0 112.0 118.0 130.0 138.0

13.0 19.0 22.0 24.0 25.0 30.0 32.0 32.0 37.0 37.0 38.0 45.0 48.0

4.0 6.3 8.0 10.0 8.0 11.2 12.5 12.5 14.0 14.0 16.0 18.0 20.0

3.15 5.00 6.30 8.00 6.30 9.00 10.00 10.00 11.20 11.20 12.50 14.00 16.00

03201 03202 03203 03204 03205 03206 03207 03208 03209 03210 03211 03212 03213

5.7 7.5 9.3 11.0 12.8 14.6 16.2 18.0 19.6 21.5 24.9 28.4

66.0 72.0 80.0 85.0 89.0 95.0 102.0 112.0 112.0 118.0 130.0 138.0

19.0 22.0 24.0 25.0 29.0 30.0 32.0 37.0 37.0 38.0 45.0 48.0

6.3 8.0 10.0 8.0 9.0 11.2 12.5 14.0 14.0 16.0 18.0 20.0

5.00 6.30 8.00 6.30 7.10 9.00 10.00 11.20 11.20 12.50 14.00 16.00

03251 03253 03255 03256 03257 03258 03259 03260 03261 03262 03264 03265

Diameter D

BSW

1/8 x 40 3/16 x 24 1/4 x 20 5/16 x 18 3/8 x 16 7/16 x 14 1/2 x 12 9/16 x 12 5/8 x 11 11/16 x 11 3/4 x 10 7/8 x 9 1" x 8

BSF

3/16 x 32 1/4 x 26 5/16 x 22 3/8 x 20 7/16 x 18 1/2 x 16 9/16 x 16 5/8 x 14 11/16 x 14 3/4 x 12 7/8 x 11 1" x 10

STI-Taps, sets of 2 pcs. for Wire-Thread-Inserts

Maschi STI, Set di 2 pz. per inserti riportati

G (BSP)

HSS-G Nominal

59 67 75 87 91 96 102 109

15 19 21 26 26 28 29 33

8.0 11.2 14.0 16.0 18.0 20.0 22.4 25.0

Art.-No.

Diameter D

G (BSP) 1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 5/8 x 14 3/4 x 14 7/8 x 14 1" x 11

10.8 14.7 18.3 23.1 25.1 28.6 32.4 36.0

6.3 9.0 11.2 12.5 14.0 16.0 18.0 20.0

03311 03312 03313 03314 03315 03316 03318 03317

STI-Taps (Second Lead) for Wire-Thread-Inserts

Maschi STI

per inserti riportati

Form D Nominal

HSS-G B

Art.-No.

10.8 14.7 18.3 23.1 25.0 28.6 36.0

59.0 67.0 75.0 87.0 91.0 96.0 109.0

15.0 19.0 21.0 26.0 26.0 28.0 33.0

8.0 11.2 14.0 16.0 18.0 20.0 25.0

6.30 9.00 11.20 12.50 14.00 16.00 20.00

03301 03302 03303 03304 03305 03306 03307

7.1 5.6 4.4 3.4

66.0 66.0 53.0 50.0

19.0 19.0 13.0 13.0

7.1 6.3 4.5 3.55

5.60 5.00 3.55 2.80

03321 03323 03325 03327

7.5 9.1 10.7 12.3 13.9

69.0 76.0 82.0 84.0 90.0

19.0 20.0 22.0 24.0 25.0

8.0 10.0 8.0 9.0 11.2

6.30 8.00 6.30 7.10 9.00

03341 03342 03343 03344 03345

Diameter D

G (BSP) 1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 5/8 x 14 3/4 x 14 1" x 11

BA 0 BA 2 BA 4 BA 6

BS. Brass 1/4 x 26 5/16 x 26 3/8 x 26 7/16 x 26 1/2 x 26

STI-Spark Plug Taps with Pilot Nose for Wire-Thread-Inserts ISO 2 (6H)

Maschi combinati STI per candele per inserti riportati dopo ISO 2 (6H)

HSS-G Nominal Diameter D M 6 M 8 M 10 M 10 M 10 M 12 M 14 M 18

Tol. ISO 1 (4H) P x 1.0 x 1.25 x 1.5 x 1.25 x 1.0 x 1.25 x 1.25 x 1.5

7.3 9.6 11.9 11.6 11.3 13.6 15.6 20.0

6 8 10 10 10 12 14 18

7 9 9 8 8 9 10 10

28 32 37 30 30 32 45 47

70 75 80 74 74 75 90 116

8 8 9 8 8 9 12 16

Art.-No. 6.3 6.3 7.1 6.3 6.3 7.1 9.2 12.5

03630 03631 03632 03637 03633 03634 03635 03636

STI-Machine Taps (Spiral Point) for Wire-Thread-Inserts ISO 2 (6H)

Maschi STI a Macchina con imbocco coretto per inserti riportati dopo ISO 2 (6H)

Form B Nominal Diameter D M 3 M 3.5 M 4 M 5 M 6 M 7 M 8 M 8 M 10 M 10 M 12 M 12 M 12 M 14 M 14 M 14 M 16

HSS-E

Tol. ISO 1 (4H)

x 0.5 x 0.6 x 0.7 x 0.8 x 1.0 x 1.0 x 1.25 x 1.0 x 1.5 x 1.0 x 1.75 x 1.5 x 1.25 x 2.0 x 1.5 x 1.25 x 2.0

3.6 4.3 4.9 6.0 7.3 8.3 9.6 9.3 11.9 11.3 14.3 14.0 13.6 16.6 16.0 15.6 18.6

53.0 53.0 58.0 66.0 72.0 72.0 80.0 80.0 89.0 85.0 95.0 95.0 95.0 102.0 102.0 102.0 112.0

13.0 13.0 16.0 19.0 22.0 22.0 24.0 24.0 29.0 25.0 30.0 30.0 30.0 32.0 32.0 32.0 37.0

4.0 4.5 5.0 6.3 8.0 9.0 10.0 10.0 9.0 8.0 11.2 11.2 11.2 12.5 12.5 12.5 14.0

Art.-No. 3.15 3.55 4.00 5,00 6.40 7.10 8.00 8.00 7.10 6.30 9.00 9.00 9.00 10.00 10.00 10.00 11.20

03505 03506 03507 03508 03509 03510 03511 03512 03515 03517 03520 03521 03522 03527 03528 03529 03533

STI-Machine Taps (Spiral Flute) for Wire-Thread-Inserts ISO 2 (6H)

Maschi STI a Macchina Elicoidali per inserti riportati dopo ISO 2 (6H)

Form C/35째RSP Nominal Diameter D M 3 M 3.5 M 4 M 5 M 6 M 7 M 8 M 8 M 10 M 10 M 12 M 12 M 12 M 14 M 14 M 14 M 16

P x 0.5 x 0.6 x 0.7 x 0.8 x 1.0 x 1.0 x 1.25 x 1.0 x 1.5 x 1.0 x 1.75 x 1.5 x 1.25 x 2.0 x 1.5 x 1.25 x 2.0

HSS-E B 3.6 4.3 4.9 6.0 7.3 8.3 9.6 9.3 11.9 11.3 14.3 14.0 13.6 16.6 16.0 15.6 18.6

Tol. ISO 1 (4H)

53.0 53.0 58.0 66.0 72.0 72.0 80.0 80.0 89.0 85.0 95.0 95.0 95.0 102.0 102.0 102.0 112.0

13.0 13.0 16.0 19.0 22.0 22.0 24.0 24.0 29.0 25.0 30.0 30.0 30.0 32.0 32.0 32.0 37.0

4.0 4.5 5.0 6.3 8.0 9.0 10.0 10.0 9.0 8.0 11.2 11.2 11.2 12.5 12.5 12.5 14.0

Art.-No. 3.15 3.55 4.00 5,00 6.40 7.10 8.00 8.00 7.10 6.30 9.00 9.00 9.00 10.00 10.00 10.00 11.20

03705 03706 03707 03708 03709 03710 03711 03712 03715 03717 03720 03721 03722 03727 03728 03729 03733

STI-Fluteless Taps

for Wire-Thread-Inserts ISO 2 (6H)

Maschi a rullare STI

per inserti riportati dopo ISO 2 (6H)

HSS-E Nominal

Tol. ISO 1 (4H) P

53.0 58.0 66.0 72.0 80.0 89.0 95.0

13.0 16.0 19.0 22.0 24.0 29.0 30.0

4.0 5.0 6.3 8.0 10.0 9.0 11.2

Art.-No.

Diameter D x 0.5 x 0.7 x 0.8 x 1.0 x 1.25 x 1.5 x 1.75

M 3 M 4 M 5 M 6 M 8 M 10 M 12

3.6 4.9 6.0 7.3 9.6 11.9 14.3

3.15 4.00 5,00 6.40 8.00 7.10 9.00

03605 03607 03608 03609 03611 03615 03620

RECOMMENDED CORE HOLE DIAMETER PREFORI PER MASCHI RACCOMANDATO

M 10

M 12

3,4

4,6

5,6

6,8

9,0

11,2

13,4

STI-Taps V-COIL rapid

for Wire-Thread-Inserts ISO 2 (6H)

Maschi STI V-COIL rapid

per inserti riportati dopo ISO 2 (6H)

Form D Nominal

HSS-G

Tol. ISO 1 (4H)

3.1 3.6 4.9 6.0 7.3 9.6 11.9 14.3

36.0 36.0 36.0 36.0 36.0 42.0 50.0 50.0

11.0 11.0 13.0 16.0 17.0 20.0 24.0 29.0

Art.-No.

Diameter D M 2.5 x 0.45 M 3 x 0.5 M 4 x 0.7 M 5 x 0.8 M 6 x 1.0 M 8 x 1.25 M 10 x 1.5 M 12 x 1.75

1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

03090 03091 03092 03093 03094 03095 03096 03097

STI-Drills V-COIL rapid Punte STI V-COIL rapid Nominal

36.0 36.0 36.0 46.0 46.0 46.0 50.0 50.0

16.0 16.0 16.0 26.0 26.0 26.0 33.5 33.5

Art.-No.

Diameter D 2.6 mm 3.2 mm 4.2 mm 5.2 mm 6.3 mm 8.3 mm 10.4 mm 12.4 mm

1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

03080 03081 03082 03083 03084 03085 03086 03087

HexTap OS

for oil drain screw threads

HexTap OS

per filetti do parafuso de drenagem do Ă˛leo

Multi-Drive

HSS-G

Tol. ISO2 (6H)

Nominal

Typ

SW 1

SW 2

Diameter D M 13 x 1.5 M 15 x 1.5 M 17 x 1.5 M 20 x 1.5 M 24 x 1.5

OS OS OS OS OS

50 50 50 50 50

21 21 21 21 21

16 16 16 16 16

4 4 5 6 8

Art.-No. 19002 19003 19004 19005 19006

HexTap SP

for spark plug thread M 14x1,25

HexTap SP

per filetti della candela di accensione M 14x1,25

Multi-Drive

HSS-G

Tol. ISO2 (6H)

Nominal

Typ

SW 1

SW 2

Diameter D M 16 x 1.25

Art.-No. 19001

HexTap LS

for oxygen sensor thread M 18x1,5

HexTap LS

per filetti sonda Lambda M 18x1,5 LS

Multi-Drive Nominal Diameter D M 18 x 1,5 M 20 x 1,5

HSS-G

LSN

Tol. ISO2 (6H)

Typ

SW 1

SW 2

LSN LS

40 50

27 21

14 14

6,3 6,3

Art.-No. 19008 19007

STI-Drills Punte STI

Nominal

Art.No.

Diameter D 2.1 mm 2.3 mm 2.4 mm 2.6 mm 3.0 mm 3.1 mm 3.2 mm 3.4 mm 3.7 mm 3.8 mm 4.2 mm 4.4 mm 4.5 mm 5.0 mm 5.1 mm 5.2 mm 5.8 mm 5.9 mm 6.0 mm 6.2 mm 6.3 mm 6.6 mm 6.7 mm 7.3 mm 8.3 mm 9.3 mm 9.8 mm 9.9 mm 10.3 mm 10.4 mm 11.4 mm 11.5 mm 11.6 mm 12.3 mm 12.4 mm 13.0 mm

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5

VC 021 VC 023 VC 024 VC 026 VC 030 VC 031 VC 032 VC 034 VC 037 VC 038 VC 042 VC 044 VC 045 VC 050 VC 051 VC 052 VC 058 VC 059 VC 060 VC 062 VC 063 VC 066 VC 067 VC 073 VC 083 VC 093 VC 098 VC 099 VC 103 VC 104 VC 114 VC 115 VC 116 VC 123 VC 124 VC 130

Oil Drain Screws for oil sump threads

Tappo di scarico dell'olio per filetti de drenagem do Ă˛leo

Nominal

Type

Piece

Art.-No.

Diameter D M 13 x 1.5 M 15 x 1.5 M 17 x 1.5 M 20 x 1.5 M 24 x 1.5

Tipo A A B B B

pezzo 10 10 10 10 10

19130 19131 19132 19133 19134

Retainer Ring OS

for oil drain screws from copper (CU) and aluminium (ALU)

anelli di tenuta OS

per tappo di scarico dell'olio di rame (CU) ed aluminio (Alu)

Size 15 x 19 x 1.5 mm 17 x 21 x 1.5 mm 20 x 24 x 1.5 mm 20 x 24 x 1.5 mm 24 x 29 x 2.0 mm 24 x 29 x 2.0 mm

Type

for screws

Piece

Tipo

per vite

pezzo

CU CU CU ALU CU ALU

M 13 x 1.5 M 15 x 1.5 M 17 x 1.5 M 20 x 1.5 M 20 x 1.5 M 24 x 1.5 M 24 x 1.5

25 25 25 25 25 25

Art.-No. 19140 19141 19142 19143 19144 19145

RECOMMENDED TAPPING DRILL SIZES V-COIL PREFORI PER MASCHI RACCOMANDATO V-COIL

2.10 2.60 3.20 3.70 4.20 5.20 6.30 7.30 8.30 8.30 9.30 10.40 10.30 10.30 11.40 12.40 12.40 12.30 12.30 14.50 14.40 14.40 14.30 16.50 16.40 18.60 18.50 18.50 20.60 20.50 20.50 22.60 22.50 22.50 24.75 24.50 24.50 26.50 27.50 27.50 27.75 28.50 30.50 30.50 31.00 33.50 34.00 36.50 36.50 37.00 37.00

M/MF M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

UNF No. No. No. No.

4 x 48 6 x 40 8 x 36 10 x 32 1/4 x 28 5/16 x 24 3/8 x 24 7/16 x 20 1/2 x 20 9/16 x 18 5/8 x 18 3/4 x 16 7/8 x 14 1" x 12 1.1/8 x 12 1.1/4 x 12 1.3/8 x 12 1.1/2 x 12

Ø mm 2.4 3.0 3.4 3.7 4.4 5.1 5.7 6.7 8.3 9.9 11.60 13.00 14.80 16.50 19.75 23.00 26.25 29.50 33.00 36.00 39.50

3.0 3.7 4.4 5.1 6.6 8.2 9.8 11.50 13.00 14.80 16.25 19.50 22.75 26.00 29.00 32.50 35.50 38.50

BSW 1/8 x 40 3/16 x 24 1/4 x 20 5/16 x 18 3/8 x 16 7/16 x 14 1/2 x 12 9/16 x 12 5/8 x 11 3/4 x 10 7/8 x 9 1" x 8

mm 3.4 5.1 6.7 8.3 9.9 11.6 13.0 14.8 16.7 20.0 23.0 26.5

G(BSP) 1/8 x 28 1/4 x 19 3/8 x 19 1/2 x 14 5/8 x 14 3/4 x 14 7/8 x 14 1" x 11

BSF 3/16 x 32 1/4 x 26 5/16 x 22 3/8 x 20 7/16 x 18 1/2 x 16 9/16 x 16 5/8 x 14 3/4 x 12 7/8 x 11 1" x 10

5.0 6.6 8.3 9.9 11.6 13.0 14.8 16.4 19.5 22.7 26.5

UNx8 1.1/8 x 1.1/4 x 1.3/8 x 1.1/2 x 1.5/8 x 1.3/4 x 1.78 x 2" x

8 8 8 8 8 8 8 8

Ø mm 10.00 13.60 17.10 21.50 23.40 27.00 30.60 33.70

28.75 31.75 35.00 38.00 41.50 44.50 47.75 50.90

TECHNICAL DATA FOR WIRE-THREAD-INSERTS ACC. TO DIN 8140 DATI TECNICI FILETTI RIPORTATI DIN 8140

S (mm) M M 2 x 0.40 M 2.5 x 0.45 M 3 x 0.50

1D 3.80 4.52 5.25

1.5D 4.80 5.77 6.75

2D 5.80 7.02 8.25

M 3.5 x 0.60 M 4 x 0.70 M 5 x 0.80 M 6 x 1.00 M 7 x 1.00 M 8 x 1.25 M 8 x 1.00 M 9 x 1.25 M 9 x 1.00 M 10 x 1.50 M 10 x 1.25 M 10 x 1.00 M 11 x 1.50 M 11 x 1.25 M 12 x 1.75 M 12 x 1.50 M 12 x 1.25 M 14 x 2.00 M 14 x 1.50 M 14 x 1.25 M 16 x 2.00 M 16 x 1.50 M 18 x 2.50 M 18 x 2.00 M 20 x 2.50 M 20 x 2.00 M 20 x 1.50 M 22 x 2.50 M 22 x 2.00 M 22 x 1.50 M 24 x 3.00 M 24 x 2.00 M 27 x 3.00 M 27 x 2.00 M 30 x 3.50 M 30 x 3.00 M 33 x 3.50 M 36 x 4.00 M 36 x 3.00 M 39 x 4.00 M 42 x 4.50 M 42 x 3.00

6.20 7.15 8.60 10.50 11.50 13.62 12.50 14.62 13.50 16.75 15.62 14.50 17.75 16.62 19.87 18.75 17.62 23.00 20.75 19.62 25.00 22.75 29.25 27.00 31.25 29.00 26.75 33.25 31.00 28.75 37.50 33.00 40.50 36.00 45.75 43.50 48.75 54.00 49.50 57.00 62.25 55.50

7.95 9.15 11.10 13.50 15.00 17.62 16.50 19.12 18.00 21.75 20.62 19.50 23.25 22.12 25.87 24.75 23.62 30.00 27.75 26.62 33.00 30.75 38.25 36.00 41.25 39.00 36.75 44.25 42.00 39.75 49.50 45.00 54.00 49.50 60.75 58.50 65.25 72.00 67.50 76.50 83.25 76.50

9.70 11.15 13.60 16.50 18.50 21.62 20.50 23.62 22.50 26.75 25.62 24.50 28.75 27.62 31.87 30.75 29.62 37.00 34.75 33.62 41.00 38.75 47.25 45.00 51.25 49.00 46.75 55.25 53.00 50.75 61.50 57.00 67.50 63.00 75.75 73.50 81.75 90.00 85.50 96.00 104.25 97.50

S Drilling Length T Tapping Length R Installation Length

T (mm) 2.5D 3D 6.80 7.80 8.27 9.52 9.75 11.25

11.45 13.15 16.10 19.50 22.00 25.62 24.50 28.13 27.00 31.75 30.62 29.50 34.25 33.12 37.87 36.75 35.62 44.00 41.75 40.62 49.00 46.75 56.25 54.00 61.25 59.00 56.75 66.25 64.00 61.75 73.50 69.00 81.00 76.50 90.75 88.50 98.25 108.00 103.50 115.50 125.25 118.50

13.20 15.15 18.60 22.50 25.50 29.62 28.50 32.62 31.50 36.75 35.62 34.50 39.75 38.62 43.87 42.75 41.62 51.00 48.75 47.62 57.00 54.75 65.25 63.00 71.25 69.00 66.75 77.25 75.00 72.75 85.50 81.00 94.50 90.00 105.75 103.50 114.25 126.00 121.50 135.00 146.25 139.50

1D 3.40 4.07 4.75

1.5D 4.40 5.32 6.25

2D 5.40 6.57 7.75

5.60 6.45 7.80 9.50 10.50 12.37 11.50 13.37 12.50 15.25 14.37 13.50 16.25 15.37 18.12 17.25 16.37 21.00 19.25 18.37 23.00 21.25 26.75 25.00 28.75 27.00 25.25 30.75 29.00 27.25 34.50 31.00 37.50 34.00 42.25 40.50 45.25 50.00 46.50 53.00 57.75 52.50

7.35 8.45 10.30 12.50 14.00 16.37 15.50 17.87 17.00 20.25 19.37 18.50 21.75 20.87 24.12 23.25 22.37 28.00 26.25 25.37 31.00 29.25 35.75 34.00 38.75 37.00 35.25 41.75 40.00 38.25 46.50 43.00 51.00 47.50 57.25 55.50 61.25 68.00 64.50 72.50 78.75 73.50

9.10 10.45 12.80 15.50 17.50 20.37 19.50 22.37 21.50 25.25 24.37 23.50 27.25 26.37 30.12 29.25 27.37 35.00 33.25 32.37 39.00 37.25 44.75 43.00 48.75 47.00 45.25 52.75 51.00 49.25 58.50 55.00 64.50 61.00 72.25 70.50 78.25 86.00 82.50 92.00 99.75 94.50

R (mm) 2.5D 3D 6.40 7.40 7.82 9.07 9.25 10.75

10.85 12.45 15.30 18.50 21.00 24.37 23.50 26.87 26.00 30.25 29.37 28.50 32.75 31.87 36.12 35.25 34.37 42.00 40.25 39.37 47.00 45.25 53.75 52.00 58.75 57.00 55.25 63.75 62.00 60.25 70.50 67.00 78.00 74.50 87.25 85.50 94.75 104.00 100.50 111.50 120.75 115.50

12.60 14.45 17.80 21.50 24.50 28.37 27.50 31.37 30.50 35.25 34.37 33.50 38.25 37.37 42.12 41.25 40.37 49.00 47.25 46.37 55.00 53.25 62.75 61.00 68.75 67.00 65.25 74.75 73.00 71.25 82.50 79.00 91.50 88.00 102.25 100.50 111.25 122.00 118.50 131.00 141.75 136.50

1D 2.00 2.50 3.00

3.50 4.00 5.00 6.00 7.00 8.00 8.00 9.00 9.00 10.00 10.00 10.00 11.00 11.00 12.00 12.00 12.00 14.00 14.00 14.00 16.00 16.00 18.00 18.00 20.00 20.00 20.00 22.00 22.00 22.00 24.00 24.00 27.00 27.00 30.00 30.00 33.00 36.00 36.00 39.00 42.00 42.00

1.5D 3.00 3.75

2D 4.00 5.00

2.5D 5.00 6.25

3D 6.00 7.50

4.50 5.25 6.00 7.50 9.00 10.50 12.00 12.00 13.50 13.50 15.00 15.00 15.00 16.50 16.50 18.00 18.00 18.00 21.00 21.00 21.00 24.00 24.00 27.00 27.00 30.00 30.00 30.00 33.00 33.00 33.00 36.00 36.00 40.50 40.50 45.00 45.00 49.50 54.00 54.00 58.50 63.00 63.00

6.00 7.00 8.00 10.00 12.00 14.00 16.00 16.00 18.00 18.00 20.00 20.00 20.00 22.00 22.00 24.00 24.00 24.00 28.00 28.00 28.00 32.00 32.00 36.00 36.00 40.00 40.00 40.00 44.00 44.00 44.00 48.00 48.00 54.00 54.00 60.00 60.00 66.00 72.00 72.00 78.00 84.00 84.00

7.50 8.75 10.00 12.50 15.00 17.50 20.00 20.00 22.50 22.50 25.00 25.00 25.00 27.50 27.50 30.00 30.00 30.00 35.00 35.00 35.00 40.00 40.00 45.00 45.00 50.00 50.00 50.00 55.00 55.00 55.00 60.00 60.00 67.50 67.50 75.00 75.00 82.50 90.00 90.00 97.50 105.00 105.00

9.00 10.50 12.00 15.00 18.00 21.00 24.00 24.00 27.00 27.00 30.00 30.00 30.00 33.00 33.00 36.00 36.00 36.00 42.00 42.00 42.00 48.00 48.00 54.00 54.00 60.00 60.00 60.00 66.00 66.00 66.00 72.00 72.00 81.00 81.00 90.00 90.00 99.00 108.00 108.00 117.00 126.00 126.00

S Lunghezza del Foro T Lunghezza della Maschiatura R Lunghezza utile del Filetto Riportato

TECHNICAL DATA FOR WIRE-THREAD-INSERTS ACC. TO DIN 8140 DATI TECNICI FILETTI RIPORTATI DIN 8140

S (Inch / pollice) UNF

T (Inch / pollice)

1D .156 .179 .206 .227 .250 .289 .331 .411 .500

1.5D .199 .229 .262 .290 .319 .371 .426 .536 .656

2D .242 .278 .318 .352 .388 .453 .521 .661 .812

2.5D .285 .328 .374 .414 .457 .535 .616 .786 .969

3D .328 .377 .430 .477 .526 .617 .711 .911 1.125

3/8 - 24 7/16 - 20 1/2 - 20 9/16 - 18 5/8 - 18 3/4 - 16 7/8 - 14 1" - 12 1"1/8 - 12 1"1/4 - 12 1"3/8 - 12 1"1/2 - 12

.562 .662 .725 .811 .874 1.031 1.196 1.375 1.500 1.625 1.750 1.875

.750 .881 .975 1.093 1.187 1.406 1.634 1.875 2.062 2.250 2.438 2.625

.937 1.100 1.225 1.374 1.500 1.781 2.071 2.375 2.625 2.875 3.125 3.375

1.124 1.319 1.475 1.655 1.812 2.156 2.509 2.875 3.187 3.500 3.813 4.125

UNC 2 - 56 3 - 48 4 - 40 5 - 40 6 - 32 8 - 32 10 - 24 12 - 24 1/4 - 20 5/16 - 18 3/8 - 16 7/16 - 14 1/2 - 13 9/16 - 12 5/8 - 11 3/4 - 10 7/8 - 9 1" - 8 1"1/8 - 7 1"1/4 - 7 1"3/8 - 6 1"1/2 - 6

.166 .193 .224 .237 .279 .305 .377 .403 .475 .562 .656 .758 .846 .937 1.034 1.200 1.375 1.562 1.768 1.893 2.125 2.250

.209 .242 .280 .300 .348 .387 .472 .511 .600 .718 .844 .977 1.096 1.219 1.347 1.575 1.812 2.062 2.330 2.518 2.812 3.000

.252 .292 .336 .362 .417 .469 .567 .619 .725 .875 1.031 1.196 1.346 .1500 1.659 1.950 2.250 2.562 2.893 3.143 3.500 3.750

.295 .341 .392 .425 .486 .551 .662 .727 .850 1.031 1.219 1.415 1.596 1.781 1.972 2.325 2.687 3.062 3.455 3.768 4.187 4.500

2 - 64 3 - 56 4 - 48 5 - 44 6 - 40 8 - 36 10 - 32 1/4 - 28 5/16 - 24

S Drilling Length T Tapping Length R Installation Length

R (Inch / pollice)

1D .141 .161 .185 .204 .225 .261 .299 .375

1.5D .184 .210 .241 .267 .294 .343 .394 .500

2D .227 .260 .297 .329 .363 .425 .489 .625

2.5D .270 .310 .353 .391 .432 .507 .584 .750

3D .313 .359 .409 .454 .501 .589 .679 .875

1D .086 .099 .112 .125 .138 .164 .190 .250

1.5D .129 .148 .168 .187 .207 .246 .285 .375

2D .172 .198 .224 .250 .276 .328 .380 .500

2.5D .215 .247 .280 .312 .345 .410 .475 .625

3D .258 .297 .336 .375 .414 .492 .570 .750

1.312 1.537 1.725 1.936 2.124 2.531 2.946 3.375 3.750 4.125 4.500 4.875

.458 .521 .612 .675 .756 .819 .969 1.125 1.292 1.417 1.542 1.667 1.792

.614 .708 .831 .925 1.038 1.132 1.344 1.562 1.792 1.979 2.167 2.354 2.542

.771 .896 1.050 1.175 1.319 1.444 1.719 2.000 2.292 2.542 2.792 3.042 3.292

.927 1.083 1.269 1.425 1.600 1.757 2.094 2.437 2.792 3.104 3.417 3.729 4.042

1.083 1.271 1.487 1.675 1.881 2.069 2.469 2.875 3.292 3.667 4.042 4.417 4.792

.312 .375 .437 .500 .562 .625 .750 .875 1.000 1.125 1.250 1.375 1.500

.469 .562 .656 .750 .844 .937 1.125 1.312 1.500 1.687 1.875 2.062 2.250

.625 .750 .875 1.000 1.125 .1250 1.500 1.750 2.000 2.250 2.500 2.750 3.000

.781 .937 1.094 1.250 1.406 1.562 1.875 2.187 2.500 2.812 3.125 3.437 3.750

.937 1.125 1.312 1.500 1.687 1.875 2.250 2.625 3.000 3.375 3.750 4.125 4.500

.338 .391 .448 .487 .555 .633 .757 .835 .975 1.187 1.406 1.633 1.846 2.062 2.284 2.700 3.125 3.562 4.018 4.393 4.875 5.250

.148 .172 .199 .212 .247 .273 .336 .362 .425 .507 .594 .687 .769 .854 .943 1.100 1.264 1.437 1.625 1.750 1.958 2.083

.191 .221 .255 .275 .316 .355 .431 .470 .550 .663 .781 .906 1.019 1.135 1.256 1.475 1.701 1.937 2.187 2.375 2.646 2.833

.234 .271 .311 .337 .385 .437 .526 .578 .675 .819 .969 1.125 1.269 1.417 1.568 1.850 2.139 2.437 2.750 3.000 3.333 3.583

.277 .320 .367 .400 .454 .519 .621 .686 .800 .975 1.156 1.344 1.519 1.698 1.881 2.225 2.576 2.937 3.312 3.625 4.021 4.333

.320 .370 .423 .462 .523 .601 .716 .794 .925 1.132 1.344 1.562 1.769 1.979 2.193 2.600 3.014 3.437 3.875 4.250 4.708 5.083

.086 .099 .112 .125 .138 .164 .190 .216 .250 .312 .375 .437 .500 .562 .625 .750 .875 1.000 1.125 1.250 1.375 1.500

.129 .148 .168 .187 .207 .246 .285 .324 .375 .469 .562 .656 .750 .844 .937 1.125 1.312 1.500 1.687 1.875 2.062 2.250

.172 .198 .224 .250 .276 .328 .380 .432 .500 .625 .750 .875 1.000 1.125 1.250 1.500 1.750 2.000 2.250 2.500 2.750 3.000

.215 .247 .280 .312 .345 .410 .475 .540 .625 .781 .937 1.094 1.250 1.406 1.562 1.875 2.187 2.500 2.812 3.125 3.437 3.750

.258 .297 .336 .375 .414 .492 .570 .648 .750 .937 1.125 1.312 1.500 1.687 1.875 2.250 2.625 3.000 3.375 3.750 4.125 4.500

S Lunghezza del Foro T Lunghezza della Maschiatura R Lunghezza utile del Filetto Riportato

TECHNICAL DATA FOR WIRE-THREAD-INSERTS ACC. TO DIN 8140 DATI TECNICI FILETTI RIPORTATI DIN 8140

S (Inch / pollice) BSF 3/16 - 32 1/4 - 26 5/16 - 22 3/8 - 20 7/16 - 18 1/2 - 16 9/16 - 16 5/8 - 14 3/4 - 12 7/8 - 11 1" - 10 1"1/8 - 9 1"1/4 - 9 1"3/8 - 8 1"1/2 - 8 BSW 1/8 - 40 3/16 - 24 1/4 - 20 5/16 - 18 3/8 - 16 7/16 - 14 1/12 - 12 9/16 - 12 5/8 - 11 3/4 - 10 7/8 - 9 1" - 8 1"1/8 - 7 1"1/4 - 7 1"1/2 - 6 G(BSP) 1/8 - 28 1/4 - 19 3/8 - 19 1/2 - 14 5/8 - 14 3/4 - 14 7/8 - 14 1"- 11 1"1/4 - 11 1"1/2 - 11

R (Inch / pollice)

1.5D

2.5D

1.5D

2.5D

1.5D

2.5D

.328 .423 .517 .600 .687 .781 .844 .946 1.125 1.284 1.450 1.625 1.750 1.937 2.062

.422 .548 .673 .787 .906 1.031 1.125 1.259 1.500 1.722 1.950 2.187 2.375 2.625 2.812

.515 .673 .829 .975 1.124 1.281 1.406 1.571 1.875 2.159 2.450 2.750 3.000 3.312 3.562

.609 .798 .986 1.162 1.343 1.531 1.687 1.884 2.250 2.596 2.950 3.312 3.625 4.000 4.312

.703 .923 1.142 1.350 1.562 1.781 1.969 2.196 2.625 3.034 3.450 3.875 4.250 4.687 5.062

.297 .385 .472 .550 .632 .719 .781 .875 1.042 1.193 1.350 1.514 1.639 1.812 1.937

.390 .510 .628 .737 .851 .969 1.062 1.187 1.417 1.631 1.850 2.076 2.264 2.500 2.687

.484 .635 .784 .925 1.069 1.219 1.344 1.500 1.792 2.068 2.350 2.639 2.889 3.187 3.437

.578 .760 .940 1.112 1.288 1.469 1.625 1.812 2.167 2.506 2.850 3.201 3.514 3.875 4.187

.672 .885 1.096 1.300 1.507 1.719 1.906 2.125 2.542 2.943 3.350 3.764 4.139 4.562 4.937

.187 .250 .312 .375 .437 .500 .562 .625 .750 .875 1.000 1.125 1.250 1.375 1.500

.281 .375 .469 .562 .656 .750 .844 .937 1.125 1.312 1.500 1.687 1.875 2.062 2.250

.375 .500 .625 .750 .875 1.000 1.125 1.250 1.500 1.750 2.000 2.250 2.500 2.750 3.000

.469 .625 .781 .937 1.094 1.250 1.406 1.562 1.875 2.187 2.500 2.812 3.125 3.437 3.750

.562 .750 .937 1.125 1.312 1.500 1.687 1.875 2.250 2.625 3.000 3.375 3.750 4.125 4.500

.237 .375 .475 .562 .656 .758 .875 .937 1.034 1.200 1.375 1.562 1.768 1.893 2.250

.300 .469 .600 .718 .844 .977 1.125 1.219 1.347 1.575 1.812 2.062 2.330 2.518 3.000

.362 .562 .725 .875 1.031 1.196 1.375 1.500 1.659 1.950 2.250 2.562 2.893 3.143 3.750

.425 .656 .850 1.031 1.219 1.415 1.625 1.781 1.972 2.325 2.687 3.062 3.455 3.768 4.500

.487 .750 .975 1.187 1.406 1.633 1.875 2.062 2.284 2.700 3.125 3.562 4.018 4.393 5.250

.212 .333 .425 .507 .594 .687 .792 .854 .943 1.100 1.264 1.437 1.625 1.750 2.083

.275 .427 .550 .663 .781 .906 1.042 1.135 1.256 1.475 1.701 1.937 2.187 2.375 2.833

.337 .521 .675 .819 .969 1.125 1.292 1.417 1.568 1.850 2.139 2.437 2.750 3.000 3.583

.400 .614 .800 .975 1.156 1.344 1.542 1.698 1.881 2.225 2.576 2.937 3.312 3.625 4.333

.462 .708 .925 1.132 1.344 1.562 1.792 1.979 2.193 2.600 3.014 3.437 3.875 4.250 5.083

.125 .187 .250 .312 .375 .437 .500 .562 .625 .750 .875 1.000 1.125 1.250 1.500

.187 .281 .375 .469 .562 .656 .750 .844 .937 1.125 1.312 1.500 1.687 1.875 2.250

.250 .375 .500 .625 .750 .875 1.000 1.125 1.250 1.500 1.750 2.000 2.250 2.500 3.000

.312 .469 .625 .781 .937 1.094 1.250 1.406 1.562 1.875 2.187 2.500 2.812 3.125 3.750

.375 .562 .750 .937 1.125 1.312 1.500 1.687 1.875 2.250 2.625 3.000 3.375 3.750 4.500

.286 .348 .411 .437 .536 .250 .312 .375 .437 .500 .125 .187 .250 .312 .375 .487 .612 .737 .862 .987 .434 .559 .684 .809 .934 .250 .375 .500 .625 .750 .612 .799 .987 1.174 1.362 .559 .747 .934 1.122 1.309 .375 .562 .750 .937 1.125 .821 1.071 1.321 1.571 1.821 .750 1.000 1.250 1.500 1.750 .500 .750 1.000 1.250 1.500 .946 1.258 1.571 1.883 2.196 .875 1.187 1.500 1.812 2.125 .625 .937 1.250 1.562 1.875 1.071 1.446 1.821 2.196 2.571 1.000 1.375 1.750 2.125 2.500 .750 1.125 1.500 1.875 2.250 1.196 1.634 2.071 2.509 2.946 1.125 1.562 2.000 2.437 2.875 .875 1.312 1.750 2.187 2.625 1.409 1.909 2.409 2.909 3.409 1.318 1.818 2.318 2.818 3.318 1.000 1.500 2.000 2.500 3.000 1.660 2.284 2.909 3.534 4.159 1.568 2.193 2.818 3.443 4.068 1.250 1.875 2.500 3.125 3.750 1.909 2.659 3.409 4.159 4.909 1.818 2.568 3.318 4.068 4.818 1.500 2.250 3.000 3.750 4.500

Recess tacca

Follower pin codolo

T (Inch / pollice)

Display VC 900 Espositore VC 900

Size

Qty.

Dimensioni

QuantitĂ

M 5 M 6 M 8 M 10 M 12 M 14 x 1.25 M 5 - 12

5 5 5 5 5 3 3

Art.-No.

04009 04010 04012 04016 04021 04096 04081