bene-user-manual-bfriends-coat-stand

US E R M A NU A L CO AT STA ND

RECOMMENDATIONS • Please read the following instructions carefully and use the product accordingly.

• This summary may not include every detail of all variations and considered steps. Please contact us should you require further information or help at any time.

• Please assemble this product in accordance with the instructions.

• Wipe clean with a dry cloth for daily care.

• Should you find that you are missing / or that you have received defective parts after unpacking, please contact us immediately and do not attempt to assemble the product.

WARNINGS • Each part has a weight loading of up to 10 kg (22 lbs).

Please ensure the load is distributed evenly to prevent instability.

• When removing items from the stand, avoid pulling or dragging them to prevent the stand from tilting.

• PLA becomes malleable above 50 °C. bFRIENDS 3D-printed elements are not suitable for dishwasher cleaning and should be kept away from heat sources.

1. Pull the sleeve element on to and up along the longer pole. Connect the longer pole to the shorter one by screwing them together and position the sleeve over the joining point. Repeat this step a further two times.

2. Screw them together.

Repeat this step a further two times.

3. Once all the wooden poles are assembled, slide each of them into the knot. Ensure that the long sections of the sticks are positioned downward to guarantee stability.

Ben e GmbH Schwarz wie s e ns tra s s e 3 334 0 Wa idhofe n/ Yb bs Aust ria BENE.COM