CT PEDESTAL
EVERYTHING’S UNDER CONTROL. ALWAYS WHERE YOU NEED IT.
The Bene CT pedestals are practical all-rounder. Directly positioned under the desk, they complete the working place and create order: documents and personal items are clearly stowed an can be rapidly fetched. The mobile pedestal with seat pad invites to a short interaction. The CT pedestal convinces with its clear design and high functionality.
It presents itself cubically and clearly at the working place and offers storage for documents and personal items. Mobile or fixed, in different sizes, in varied materials and colours, having insides as required, the CT pedestal is an essential assistant in office routine.
PRODUCT DESCRIPTION
1 2 3 4
Rear wall: 19 mm chipboard
Visible sides: 19 mm chipboard
Top panel: as 19 mm chipboard, 25 mm1 chipboard, 13 mm1 compact board
Front: 16 mm chipboard
1 only for fixed pedestal
Rear wall and visible sides together form the carcass and therefore always have the same design.
OVERVIEW & DIMENSIONS
The three pedestal types differ according to carcass size and usage purpose.
Mobile pedestal
Supporting pedestal
Fixed pedestal
330 mm / 430 mm
445 mm 1 / 600 mm / 800 mm
548 mm (9 He = height units) /
598 mm (10 He)
330 mm / 430 mm
600 mm / 800 mm
548 mm (9 He = height units) /
598 mm (10 He)
330 mm / 430 mm
600 mm / 800 mm
740 mm (12 He)
with castors (hard / soft)
· free-standing
together with adjustment legs
· below the desk, left or right can be connected to fixed or height-adjustable desks connection fittings replace the desk slab-end
together with adjustment legs
· free-standing attached to desk at fixed height
· attached to height-adjustable desk without top panel as continuous table top (only for desks with fixed heights) across two desks
adjustment legs can be levelled up to + 20 mm.
1 only possible in combination with width 430 mm, drawers with full pull-out and vertical grip groove
OPTIONS
CONTINUOUS TABLETOP
If a fixed pedestal is to be connected to a table with a fixed height, then a continuous tabletop can be selected.
FIXED PEDESTAL TOP
The top can be extended to the rear using an excess length of top panel, depending on the pedestal use. This option exists for fixed pedestals.
MOBILE PEDESTAL SEAT PAD
The mobile pedestal can be optionally provided with a seat pad whose dimensions vary according to pedestal width. The seat pad is fastened with pressure lock or Velcro fasteners. Maximum load: 75 kg for 330 mm pedestal width:
W x D 315 x 415 mm for 430 mm pedestal width:
W x D 415 x 415 mm
Covers are available in the fabric groups P0 - P4 in accordance with the Bene seating furniture collection. For additional information, see price list “Colours & materials”
Lock with replaceable cylinder, including 2 keys (1 of them is foldable) and locking bar. Optional without lock and lock hole but with locking bar.
ANTI-TIPPING PROTECTION
An anti-tipping protection is provided for pedestals with a front division comprising 6 He drawers. A counterweight or supporting roller can be selected for this. The required number depends on the pedestal type, front division and drawer type.
Counterweight
Concrete plate fastened to the inside of the rear wall.
Supporting roller Is mounted in front on the lowermost drawer. Colour: black.
OPTIONS
DRAWERS
Metal drawers with full or partial pull-out
· Interlock system
Self-closing mechanism with/without shock absorber
· Push-to-open function
6 He drawers at the bottom are configured with full pull-outs, but can be optionally configured with partial pull-outs. For 6 He drawers, the anti-tipping protection is implemented as a counterweight or optionally as a supporting roller.
Drawer front 1-2-3-3
The pedestal front is either provided with a vertical grip groove or with a push-to-open function. Drawers with push-to-open function open comfortably at the light press of a finger.
Front divisions - mobile pedestal and supporting pedestal, 9 HE
Front divisions - mobile pedestal and supporting pedestal, 10 HE
1-3-3-3 1-2-3-4 1-3-6 3-3-4
He = height unit with 50 mm nominal height example: 9 He (1-2-3-3) corresponds to 50 mm – 100 mm – 150 mm – 150 mm.
Front divisions - fixed pedestal, 12 HE
1-2-3-6 1-2-3-3-3
OPTIONAL BUILT-IN COMPONENTS
HANGING CRADLE FOR 6 HE DRAWERS 1
Material and colour: Legs made from black synthetic material, frame made of nickel-plated steel profile.
INDEX CARD TRAY 1
Material and colour: Synthetic material platinum.
Swivel plates for card index trays
Material and colour: Synthetic material platinum.
A4 landscape format A4 landscape format A5 landscape format A5 landscape format A6 landscape format A6 landscape format
NON-SLIP MAT 1
LENGTH DIVIDER
WIDTH DIVIDER
STAMP HOLDER
ACCESSORY EXTENSION
STATIONARY INSERT 430 MM
ACCESSORY TRAY
COLOURS AND MATERIALS
MATERIALS AND SURFACES
This product is available in the following materials and colours.
• available, price acc. to price list - not available
Surface
Melamine group 1 Basic colours
Melamine group 2 Additional basic colours
Melamine group 2 Décor colours
Melamine group 3 Décor colours with texture
Melamine group 3 Accent colours
Veneer group 1
Veneer group 2
The bottom is designed in slate melamine (MS).
Colours available in each group can be found in corresponding guide „Colours & materials”
The price list only shows defined versions, all other versions can be found in the pCon.-Products.
COLOURS & MATERIALS
MELAMINE GROUP 1: Basic colours
MELAMINE GROUP 2: Additional basic colours
MELAMINE GROUP 2: Decor colours
GROUP 3: Accent colours
Decor
COLOURS & MATERIALS
VENEER: Maple
VENEER: Oak
VENEER: Chestnut
VENEER: Beech
COLOURS & MATERIALS
All fabric collections are available as cover: era, Urban Plus, Xtreme Plus, Inn, Step, Step Melange, Remix, europost, Mainline Flax, Assam, Steelcut, Fox, Fiord, Hallingdal, Steelcut Trio, Divina Melange, Divina MD, Coda, elle. More information about the specific fabric collections is available at www.bene.com.