Issuu

LEVEL LIFT 2 FAMILY

CONSULT PURE

CONSULT PURE LIFT 2

LEVEL PURE (LIFT) MEETING

LEVEL PURE LIFT 2 MEETING

CONSULT PURE

FIXED HEIGHT HEIGHT ADUSTABLE

FIXED HEIGHT

LEVEL PURE MEETING QUATTRO

SINGLE- / MULTI-PART TABLETOP

LEVEL PURE MEETING

SINGLE- / MULTI-PART TABLETOP

LEVEL PURE MEETING HIGH

SINGLE- / MULTI-PART TABLETOP

HEIGHT ADUSTABLE

CONSULT PURE LIFT

CONSULT PURE LIFT 2

HEIGHT ADUSTABLE

LEVEL PURE LIFT MEETING

SINGLE- / MULTI-PART TABLETOP

LEVEL PURE LIFT

MEETING QUATTRO

SINGLE- / MULTI-PART TABLETOP

HEIGHT ADUSTABLE

LEVEL PURE LIFT 2 MEETING

SINGLE- / MULTI-PART TABLETOP

LEVEL PURE LIFT 2

MEETING QUATTRO

SINGLE- / MULTI-PART TABLETOP

DELTA PURE MEETING (LEVEL PURE MEETING)

FIXED HEIGHT

DELTA PURE MEETING BY BENE

SINGLE- / MULTI-PART TABLETOP

DELTA PURE MEETING HIGH BY BENE

SINGLE- / MULTI-PART TABLETOP

ELECTRIC HEIGHT ADJUSTmENT

RASTOmAT

ALSO AVAILABLE WITH ROUND COLUmN DESIGN

ALSO AVAILABLE WITH DELTA WOOD DESIGN

PRODUCT DESCRIPTION

The LEVEL LIFT 2 family is divided into two table types.

LEVEL LIFT 2

LEVEL LIFT 2 PRO LEVEL LIFT 2 TWIN

height adjustment by manual switch for the sitting and standing height

A LEVEL LIFT 2 with high quality materials and design values.

· mDF table top with waterfall edge Fenix black nanotech matte surface

· round column manual switch Premium 2 with sensor

· divided sliding top frame panel

height adjustment by manual switch for the sitting and standing height

PRODUCT DESCRIPTION - LEVEL LIFT 2

A solid desk for alternating at work between sitting and standing. T-leg or C-leg frame with 10 mm floor compensation, various tabletop shapes of 13 mm, 19 mm, or 25 mm thickness and 2 mm or 3 mm edge.

Tabletop

Support bracket

Multi-function head Central

PRODUCT DESCRIPTION - LEVEL LIFT 2 TWIN

Combination

COLUMN TYPES

Available in black, white, or aluminium. Levelling: +10 mm with adjustment screws

LEVEL LIFT 2

C-leg, rectangular

powdered 80 x 50 mm steel profile pipe, cantilever legs: die-cast aluminium frame

T-leg, rectangular

powdered 80 x 50 mm steel profile pipe, cantilever legs: die-cast aluminium frame

LEVEL LIFT 2 TWIN

rectangular column powdered 99,5 x 60 mm steel profile pipe

round column powdered 99,5 x 80 mm steel profile pipe

T-leg, round powdered Ø70 mm steel profile pipe, cantilever legs: die-cast aluminium frame

Classic Lift

Thickness of slab-end

38 mm, chipboard for melamine, 39 mm, chipboard for veneer, fastening construction and cover plate made of steel

HEIGHT

NOTE

Frame type 1

Table depth

Tabletop shapes

1 Cantilever leg length changes depending on depth.

2 The corner column with a extension dimension of 600 mm, is designed as a T-leg.

3 Only possible with 3-part column with increased collision protection.

Measurements in mm

COLUMN TYPES

Every electrically height-adjustable table in the LEVEL LIFT 2 family has at least two lifting columns (angled and combination tables: three lifting columns, LEVEL LIFT TWIN 2 tables: four lifting columns). Each lifting column has an electric motor. The following types of columns are used for LEVEL LIFT 2 / LEVEL LIFT 2 TWIN.

TWO-PART / THREE-PART TELESCOPIC RECTANGULAR COLUMN

radius column R3

· without visible glides

2-part rectangular column (JS36DR1-2-S); stroke length: 495 mm

3-part rectangular column (JS36DR1-3-S); stroke length: 660 mm

· lifting force 800 N / column

increased collision protection integrated in control unit

· two identical columns per table manual switch is connected to the control unit

· includes separate control unit with integrated power supply unit

Maximum load 100 kg (PC, PC holder, T-Panel, etc. must be included in the calculation!)

Type

· Power supply input 220-240V / 50-60Hz / 2.5A maximum on-time 2 min. on, 18 min. off

· Protection category II

Noise ~47dBA

Upward lift speed 38 mm / s

Reference values for power consumption Load for power consumption

Stand-by 0,2 watts

· Upward lift 100 kg 230 watts (two-part column)

Upward lift 100 kg 220 watts (three-part column)

THREE-PART TELESCOPIC ROUND COLUMN

radius column R3

· without visible glides

3-part round column (JS36DC1-3-S) - Stroke length: 660 mm

· lifting force 800 N / column

increased collision protection integrated in control unit two identical columns per table

· manual switch is connected to the control unit includes separate control unit with integrated power supply unit

Maximum load 100 kg (PC, PC holder, T-Panel, etc. must be included in the calculation!)

Type

Power supply input 220-240V / 50-60Hz / 2.5A

· maximum on-time 2 min. on, 18 min. off Protection category II

· Noise ~47dBA

Upward lift speed 38 mm / s

Reference values for power consumption Load for power consumption

Stand-by 0,2 watts

Upward lift 100 kg 220 watts

MANUAL SWITCH (ELECTRIC HEIGHT ADJUSTMENT)

HEIGHT ADJUSTMENT WITH MANUAL SWITCH

There are three different types of manual switch.

MANUAL SWITCH EASY 2

Dimension : W: 59,9 mm, H: 17,3 mm

Colour: black

Functions: up/down function, operation via buttons, with integrated collision protection sensor in control unit, upper and lower limit of table height

Intuitive operation

MANUAL SWITCH BASIC 2

Dimension : W: 64,3 mm, H: 23,8 mm

Colour: black

Functions: up/down function, intuitively operated element, with integrated collision protection sensor in control unit, upper and lower limit of table height

MANUAL SWITCH PREMIUM 2

Dimension : W: 64,3 mm, H: 23,8 mm

Colour: black

Functions: up/down function, intuitively operated element, with integrated collision protection sensor in control unit, upper and lower limit of table height, graphic display, 2 memory positions

The manual switches (BASIC 2 / PREmIUm 2) are operated via a tilt function instead of buttons so that direct visual contact with the hand control is not necessary when adjusting the height of the table.

HANDSET OVERVIEW

control via button

control via paddle

memoryposition

desk hight limit container-/shelfstop

increased collision protection sensor integrated in control box

graphic display

MANUAL SWITCH POSITIONS

It is possible to choose the positioning of the switch, as either protruding or flush with the table top, and either on the left or right-hand side of the desk. The manual switch Easy can only be selected in the protruding position.

OVERVIEW AND DIMENSIONS

Options for LEVEL LIFT 2 and LEVEL LIFT 2 TWIN.

The following are available for these tabletop shapes. The properties of the options always apply for one tabletop.

Options

Cable gap

Grommet hole / bFRIENDS Power module

Wireless charger

Tiltable cable tray L

Cable chain

Plug board bracket for cable tray L

CPU holder

Cable flap

Cable Box

Plug Box

Preparation for connection to T-Panel

Connection to T-Panel Extend

Covering caps

modesty panel

Sliding top

Divided sliding top

Frame panels

Cable cover

Spacers

Cable management

Excess length of desk top

Bag hook

Cable gap

Fixed positions. 1 or 2 cable gaps are possible per tabletop: left/right/left and right.

Dimension: Width 350 mm, depth 45 mm

Not possible for 3 mm edges, cable flap, or sliding top.

Grommet hole

Fixed positions. 1 or 2 grommet holes are possible per tabletop: left/right/left and right.

Cover colour: black, white, or aluminium

Not possible with cable flap or sliding top.

Cable chain for further information  priceliste „cable- & media management“

Plug board bracket for cable tray L

To fix the connection plug board in the cable tray.

Colour: Black

CPU holder

maximum load: 30 kg

maximum height of computer: 450 mm

Bag hook

attached to the head piece with screws, powder-coated steel in black, white or aluminium, Dimensions: height 100 mm, width 32 mm, depth 46,8 mm

Cable tray L tiltable

mounted on the frame

Colours: Black, white, or aluminium

Space from bottom to cable tray: 600 mm (at the lowest position)

CENTRAL CABLE TRAY - LEVEL TWIN & LEVEL LIFT 2 TWIN

Covering can be rotated and mounted on the combination leg. Colours: Black, white, or aluminium

With rectangular column: the central cable tray can be deselected as an option. With round column: the central cable tray is always technically required and cannot be deselected (it serves as a safeguard against twisted installation)

CABLE FLAP

Fixed positions. Possible positions: central/left/right.

Central: table widths of up to 1.300 and 1.400 mm or greater, left/right: table widths of 1.600 mm or greater

Not possible in combination with cable outlet, cable gap, or sliding top.

CABLE BOX

The cable box enables quick and easy access to the cable tray. The plastic frame and the metal flap are available in white, black or aluminum.

· max. 2 units per table top possible position per desktop shape specified as fixed · position in the centre up to desk width of 1.399 mm position left / right / left and right from desk width of 1.400 mm

Cannot be combined with sliding top and cable flap.

PLUG BOX

The plug box is milled flush into the table top and can be equipped with a connection plug board. The metal flap are available in black or aluminum.

· Flap can only be opened from one side via “Push to open”. max. 2 units per table top possible · position per desktop shape specified as fixed position in the centre up to desk width of 1.399 mm position left / right / left and right from desk width of 1.400 mm

Cannot be combined with sliding top and cable flap.

WIRELESS CHARGER

The wireless charger can be installed in the front area of the tabletop on the left or right and enables wireless charging of a compatible device. The recess for the wireless charger is milled into the tabletop from below. A sticker is attached to the tabletop to indicate where the charging module is located. The wireless charger is a separate item, must be ordered separately (simple configuration via the pCon.planner mETA planning) and cannot be retrofitted.

Technical data

· diameter 80 mm enclosure black

· charging power 5 W compatibility works with all devices that support wireless charging with the Qi standard. works with most lightweight mobile phone cases (< 3 mm)

· water resistance class IP-43 silent / active mode (for the quietest possible charging process)

Scope of delivery

· wireless charger power cable 1,5 m (available plug types A, D, F, L)

· sticker to stick on the tabletop (labelling: position of wireless charger) assembly material (cable clips, screws)

Possible positions of the wireless charger Fixed positions. One wireless charger per tabletop possible: concealed on the left or on the right

Not possible in combination with the W3 tabletop.

BFRIENDS POWER MODULE

The bFRIENDS Power module is available in three sizes - S, m and L. It can be fitted to all tables wherever a cable outlet is possible. An existing cable outlet hole (diameter 80 mm) can also be replaced by a Power module. Installation in combination with a sliding table top or cable flap is not possible.

more information on the possible colours and colour configurations  Product data sheet „bFRIENDS“

bFRIENDS Power Module types

Type S with power socket or USB charging socket (A+C) charging port USB-A 18W / USB-C 22W

Type M with power socket or USB charging socket (A+C) charging port USB-A 18W / USB-C 22W

Type L with power socket and/or USB charging socket (A+C) charging port USB-A 18W / USB-C 22W (possible are: 2 x power socket | 2 x USB | 1 x power socket + 1 x USB)

bFRIENDS Power Module parts/structure

USB-Charger (A+C) or power socket

Sleeve

Insert

Base

Fastener

Possible positions of the bFRIENDS Power Module Fixed positions. 1 or 2 cable outlet holes per panel possible: left / right / left and right

Not possible in combination with sliding top and cable flap.

PREPARATION FOR CONNECTION TO T-PANEL

mounting brackets are inserted into the consoles and fixed in place from below. The number of mounting brackets depends on the table width.

Longitudinal holes in the console allow the gap to be adjusted from 2-25 mm. A rocker allows the T-Panel to be levelled. Possible with table depths of 800 mm or greater.

Can also be connected to T-Panel Extend.

more information  product data sheet for T-Panel Pure, multi, Curve, Basic and Acoustic.

COVERING CAPS

Covering caps can be added to upgrade the table without preparation for connection to the T-Panel.

MODESTY PANEL

Flush with the top edge of the table; height varies depending on table-top thickness. Available in 16 mm chipboard. Longitudinal holes in the console allow the gap to be adjusted from 0 - 20 mm. Assembly same as for T-Panel Curve / Pure.

Black mounting bracket. Black, white or aluminium cover available.

Not available in combination with LEVEL LIFT 2 TWIN and with T-Panel.

SLIDING TOP/DIVIDED SLIDING TOP

The sliding top has a sliding mechanism with a latching function for locking. It can be easily slid to the front by loosening the catch, allowing cable management access.

Sliding top

· Sliding length: 177 mm

at a table depth of 600 mm, the sliding distance is reduced by 50 mm only makes sense in connection with a cable tray

· not possible with cable flap or cable outlet cable cover optional

Divided sliding top

· Sliding length: 107 mm only with T-leg frame

· only makes sense in connection with a cable tray for table depths of 800 mm or greater

· not possible with cable flap or cable outlet frame panel and cable cover optional

T-Panel Extend T-Panel

OPTIONS

FRONT/SLIDING PANELS

The following options allow upgrading the table to include a divided sliding top.

FRAME PANELS 1

This panel improves the visitor's side view of the table. The metal is screwed to the headpiece.

A small gap between it and the tabletop allows cables to be fed through. No T-Panel can be connected in combination with the frame panel. Available for table widths of 1.400, 1.600, and 1.800.

CABLE COVER 2

There are two different steel plate inserts. Their function is to cover the basic cabling 2a and provide the user another level for temporary cabling 2b

The first version is connected with metal hooks to the cable tray, but the second requires two connection plug board holders. They can be used to fix the connection plug board in place and fasten the trays with inserted magnet.

The inserts can be used with all types of sliding tops and configured as desired. One of each version is always included in delivery. Available for table widths of 1.400, 1.600, and 1.800. Cable covers must be ordered separately.

CABLE MANAGEMENT

The type of cable management is based on the column design.

Two-part / three-part column with increased collision protection integrated in the control unit: The manual switch, just like every column, is connected to the control unit. The power supply unit is integrated in the control unit and is connected to the mains via the mains cable.

Two lengths are available for the power lead with the plug types A, D, F, L:

· 1.500 mm: to connect to a connection plug board in the cable tray

3.000 mm: for a direct connection to a power socket in the building (e.g. floor tank)

Plug types

A, F, L: straight plug

D: angle plug

OPTIONAL

Tiltable cable tray L Cable outlet

Cable chain Cable box

Plug board bracket for cable tray L Cable gap

bFRIENDS Power Module Plug box

Extended cable management and technical description  product data sheet cable and media management.

SPACERS

Spacers can be used to connect several tables. They keep the distance between the tables constant at a minimum of 25 mm.

Attention: The lateral spacers are different for the rectangular and the round column. Please pay attention to this when configuring!

Included in the package: Two units, spacers must be ordered separately.

Spacer positions LEVEL LIFT 2

Colour: black

Spacer position LEVEL LIFT 2 TWIN

Spacers LEVEL LIFT 2

Spacer LEVEL LIFT 2 TWIN, with integrated cable lead

Colour: black

NOTE - SPACER ON VISITOR SIDE

The visitor-side spacers (always 100 mm adjustable) are generally intended for installation with T-Panels. Depending on the depth of the table or type of column, there are different distances between cantilever leg and the table trailing edge. Dimensions in the table always the dimensions between two tabletops.

Example

At 2 x 800 depth with T-Panel multi + distances, the result is 133 mm - according to the table, it works (between 103 and 203 mm). If the tables had a depth of 1.000 mm, it would not work (3 - 103 mm).

OPTIONS

EXCESS LENGTH OF DESK TOP

Depending on the shape of the table top, the table top can be enlarged in different directions by the specified dimensions. Not available in combination with equal-sided 120° angle desk W3 .

visitor