SETTLE
SPACE FOR ENCOUNTER
Settle down, get comfy, and engage with colleagues. With its soft shapes and high quality materials, Bene’s upholstered furniture range brings a homely feel to the office. SETTLE consists of individual furniture elements as well as optional modular components that can be combined to create a wide variety of different settings. An optional high backrest can be added to provide additional screening and to incor-
Design: Pearson Lloyd
porate a work ledge to create a dynamic room setup. Integrated plug boards enable access to the network and power, allowing for media-supported collaboration. SETTLE can be used in a variety of zones and areas in modern office layouts and works perfectly in combination with other existing Bene product ranges, such as NOOXS, TIMBA, and PARCS.
PRODUCT DESCRIPTION
Back panel: The substructure is made of plywood.
Back Panel Connection Plate
Cushions: For backrest 600 x 360 mm or 450 x 360 mm (with side armrest).
Frame: Powder-coated steel,dark grey with plastic glides
Bench: widths 1.200, 1.500 or 1.800 mm, depth 720 mm, seat depth 495 mm.
Covers are available in the fabric groups P0 - P5 & leather groups L1, L5 in accordance with the Bene seating furniture collection.
Colour configuration options: single-coloured, different colour for recessed elements or different colour for recessed elements and back panel. All upholstered elements contain dimensionally stable polyurethane foam padding. Optionally in flame-resistant version according to BS 5852 Part 2, Ignition Source 5 (Crib 5). Sofa, SETTLE 45° and 90° can only be used as a connection element between 2 linear elements and not as an end piece.
OVERVIEW & DIMENSIONS
OPTIONS
WORK LEDGE
Rectangular chipboard surface (19 mm) with skid frame. Ledge surface available in widths of 900 (2-seater) or 1.500 mm (3-seater).
Table top depth: 300 mm and table top height: 1.065 mm. Ledge available in melamine or veneer finish.
Frame: Powder-coated steel, dark grey with plastic glides
Weight: ~14,5 - 17 kg depending on size (weight without packing)
PILLOW ROLL
Measurements: Width: 200 mm, depth: 425 mm and height: 200 mm. Covers are available in the fabric groups P0 - P5 & leather groups L1, L5 in accordance with the Bene seating furniture collection.
Weight: ~0,36 kg (weight without packing)
POWER BOX
Available with either 4x Power sockets or 3x power sockets with 2x RJ45-CAT6. Starter Cable: 5.000 mm
INSPIRATIONS
Inspiration #01
For waiting areas, break-out areas, cafés or communication zones in the office. SETTLE in a generous 45° application.
Inspiration #02
An upholstered furniture setting that requires minimal space, e.g. in a modern management office or in small reception areas.
INSPIRATIONS
Inspiration #03
SETTLE creates an optimal environment for free thinking and creative work when used in combination with interactive walls.
Inspiration #04
Soft shapes, materials and colours: SETTLE for cafés.
INSPIRATIONS
Inspiration #05
SETTLE with a high backrest for visual and acoustic screening.
Inspiration #06
Settling in, feeling good and getting comfortable with each other: a screened area for interaction.
INSPIRATIONS
Inspiration #07
SETTLE for visual and acoustic screening for informal exchanges.
COLOURS & MATERIALS
All fabric collections are available as reference material: Era, Xtreme Plus, Remix, Europost, Mainline Flax, Assam, Steelcut, Stamskin Top, Fox, Fiord, Hallingdal, Steelcut Trio, Divina Melange, Divina MD, Coda, Elle, Opera.
Various leather collections: Ultra, Spectrum.
More information about the specific fabric and lether collections is available at www.bene.com.
DESK EXTENSION
MELAMINE GROUP 1: Basic colours
MW white
MB basalt
MQ office white
MC canvas
MP platinum
MA aluminium MS slate
MELAMINE GROUP 2: Additional basic colours 1,2,3
MH stone grey
TM clay
1 not available for compact desk top
2 not available for duo-edge
3 not available for 3 mm edge, single colour
COLOURS & MATERIALS
MELAMINE GROUP 2: Decor colours 1,2,3
MELAMINE GROUP 3: Decor colours , wooden texture 1,2,3 AR
MELAMINE GROUP 3: Accent colours 1,2,3
VENEER: Maple
VENEER: Oak
VENEER: Walnut
VENEER: Bamboo
1 not available for compact desk top
SETTLE
THE BENE RESPONSIBILITY
THE BENE RESPONSIBILITY
Bene plays a pioneering role in the field of sustainability. This spans all company divisions – from product development, procurement, production, and logistics to product recycling. From the first sketch through to series production, ecological requirements are always an important factor in the product development process. It includes selecting environmentally compatible materials, such as certified timbers from sustainably managed forests, using recycled materials and increasing the use of renewable raw materials. Other important requirements for a sustainable product design are labelling the materials, their ability to be repaired, and a long service life for the components used, with the aim to integrate them into a second product life cycle.
To guarantee a high recyclability standard for our products at the end of their service life, we avoid composites as much as possible and develop furniture that allows for disassembly by material type.
Bene products are sourced and made in Europe. 99.9% of all deliveries reach us from a European country. Around 94% of all raw material supplies come from Austria and Germany. Around 93% of the raw materials comes from suppliers within 500 kilometres of our production site.
SUSTAINABLE RAW-MATERIALS
At Bene, the following materials are used as a matter of course:
· chipboards low in formaldehyde glues low in formaldehyde
· water-based varnish systems recyclable materials
· materials with a high recycling share PVC-free synthetics
CONTRIBUTION TO BUILDING CERTIFICATIONS
Bene guarantees products free from:
· CMR substances halogenated solvents in synthetics
· chlorinated hydrocarbons heavy metal pigments
· materials with azo pigments Coatings with biocidal effects (such as wood preservatives, pesticides).
In the context of ecological building certification, design systems such as furniture and dividing walls help to achieve a good result and a higher score.
Bene's products make a contribution towards the LEED, WELL Building Standard, DGNB, BREEAM, etc. certifications. Criteria include, for example, environmental product declarations, indoor air quality, acoustics and convertibility.
SETTLE
Example configuration
· SETTLE 3-seater
With side armrest
· 1.800 x 814 mm
Total weight 65,94 kg
Materials
Environmental key figures
· 99,5 % sortable by type 91,6 % recyclable
· 56,9 % of contents are renewable raw materials
10,8 % recycled production materials
On request, Environmental Product Declarations (EPD, LCA) – at Bene we call them Life Cycle Data Sheets – can be provided for all standard product configurations.
A list of product-specific certificates and design awards can be found on the Bene product website.
Environment-related information about Bene: https://bene.com/en/sustainability-report-2021/