product-data-sheet-bene-workstation by Bene Office

WORKSTATION

Workstation is a technologically advanced desk programme with high systemic smart features that can be shaped in various ways to meet individual customer needs. Simple to adapt to specific structural environment.

The desk‘s highly flexible table top frame offers a wide range of use options. Workstation desk offer a virtually limitless range of combinations and are responsive to organisational change.

PRODUCT DESCRIPTION

WORKSTATION BASIC RECTANGULAR

WORKSTATION BASIC ROUND

WORKSTATION SQUARE BY BENE

PRODUCT DESCRIPTION

Table top: Three board thickness are available: 13 mm compact top, 19 mm, or 25 mm chipboard

Edge (circumferential): Chipboard 19 mm: 2 mm mono-edge, or 3 mm mono-edge. Chipboard 25 mm: 2 mm mono-edge or 3 mono-edge.

Frame (self-supporting table frame): Basic rectangular, Basic round, SQUARe by Bene.

Table top Frame

Slab-end

Foldable cable tray T

Handle and retainer for sliding top

Universal adapter

Plate connector

Diecast- clamps

Table top clip

Plug box or cable box

Cable support arm for foldable cable tray T

OVERVIEW AND DIMENSIONS

DESK TOP SHAPES COMMUNICATION SEGMENTS TC

Lateral over 1 table rectangular MV

Lateral over 2 tables rectangular ME

Lateral over 1 table rounded MU

DESKTOP

Lateral over 2 tables rounded MR

LATERAL DEFINITION AND DIRECTION OF TOP SHAPE

RE, NG

Visitor side (V)

User side (U) right side (R) left side (L)

Visitor side (V)

Visitor side laterally (VS) front (F)

User side (U) lateral (S)

Visitor side (V)

User side (U) front (F)

CONNECTION POSITION AND DIRECTION OF TOP SHAPE

Visitor side laterally (VS)

Visitor's side left (VL)

left side (L)

Visitor's side right (VR)

User side (U) right side (R)

FRAME VERSIONS

The heights shown all refer to the upper edge of the desk when 25 mm chipboard is being used. In the case of 19 mm chipboard and 13 mm compact top, the desk height is reduced accordingly.

BASIC RECTANGULAR

· Rectangular pipe 60 x 30 mm, steel Levelling: +10 mm by means of adjustment leg

· Range of height adjustment: fixed or in 20 mm grid with tool

BASIC ROUND

Round pipe Ø 60 mm, steel

· Levelling: +10 mm by means of adjustment leg

Range of height adjustment: in 20 mm grid with tool

SQUARE BY BENE

Rectangular pipe 55 x 25 mm, steel Levelling: +10 mm by means of adjustment leg

· Range of height adjustment: in 20 mm grid with tool

OPTIONS TABLE TOP

CABLE OUTLET

Quick and easy to pass cabling through the table top. The outlet cover can be slip to one side so that the cable can pass though it.

· 1-3 units per table top possible Positions specified as fixed per desktop shape

Possible positions of the grommet hole

PLUG BOX

The plug box is milled flush into the table top and can be equipped with a connection plug board. Quick and easy access to the plug board is enabled by opening the aluminium flap.

2 unit per table top possible

· Position per desktop shape specified as fixed Position in the centre up to desk width of 1.400 mm

· Position left or right from desk width of 1.600 mm upwards

Cannot be combined with sliding top and cable flap.

Plug box and integral connection plug boards  “Cable and media management” price list

Possible positions of the plug box

CABLE BOX

The cable box enables quick and easy access to the cable tray. The plastic frame and the metal flap are available in white, black or aluminum.

1 to maximum 2 pieces per desk top are possible

· position per desktop shape specified as fixed position in the centre up to desk width of 1.400 mm

· position left or right from desk width of 1.600 mm upwards

Cannot be combined with sliding top and cable flap.

Possible positions

Cable Box

x 152 mm

Re, nG

Plug box

Re, nG

OPTIONS

BFRIENDS POWER MODULE

The bFRIenDS Power module is available in three sizes - S, m and L. It can be fitted to all tables wherever a cable outlet is possible. An existing cable outlet hole (diameter 80 mm) can also be replaced by a Power module. Installation in combination with a sliding table top or cable flap is not possible.

more information on the possible colours and colour configurations  Product data sheet „bFRIenDS“

bFRIENDS Power Module types

Type S with power socket or USB charging socket (A+C) charging port USB-A 18W / USB-C 22W

Type M with power socket or USB charging socket (A+C) charging port USB-A 18W / USB-C 22W

Type L with power socket and/or USB charging socket (A+C) charging port USB-A 18W / USB-C 22W (possible are: 2 x power socket | 2 x USB | 1 x power socket + 1 x USB)

bFRIENDS Power Module parts/structure

USB-Charger (A+C) or power socket

Sleeve

Insert

Base

Fastener

Possible positions of the bFRIENDS Power Module Fixed positions. 1 or 2 cable outlet holes per panel possible: left / right / left and right not possible in combination with sliding top and cable flap.

OPTIONS TABLE TOP

SLIDING TOP

The sliding top has a sliding mechanism with a latching function for locking. It can be easily slid to the front by loosening the catch and thus allowing cable management access.

Sliding information: 190 mm

Only in combination with a cable tray. The sliding top cannot be used with a desk depth of 600 mm. Combination with cable flap is not possible.

Possible desk top shapes

Re, nG

CABLE FLAP

Cable flaps allow for easy, ergonomically correct and quick access to cable management.

Version possible as table top or variation.

· The cable flap is divided in the centre from a desk width of 1.401 mm upwards. Installation on universal adapters included.

Only makes sense in connection with a cable tray. Combination with sliding top is not possible. If a shortened sliding top is selected, the depth of the cable flap is reduced by -31 mm.

Possible positions for the cable flap

Re, nG K1 K3

Cable flap depth 180 mm

PREPARATION FOR CONNECTION TO T-PANEL (UNIVERSAL ADAPTER)

The desk is automatically equipped with universal adapters in this process. This enables different elements to be connected.

2 units up to a desk width of 1.400 mm

· 3 units from a desk width of 1.401 mm upwards

· T-Panel Pure: behind desk top with gap or behind shortened desk top

T-Panel Curve: behind desk top with gap or in top slot

· T-Panel multi: behind desk top with gap or in top slot

T-Panel cannot be connected using table top clamp.

Universal adapter

OPTIONS

FOLDABLE

CABLE TRAY T

The cable tray is aimed at providing virtually invisible cable management. Vertical cable routing can be done by means of cable chains which can be hooked in along the entire length of the cable tray.

Cable chains  pricelist cable and media management.

foldable cable tray T

Possible positions for the cable tray

INSTALLATION OF CONNECTION PLUG BOARDS IN CABLE TRAYS

Connection plug board brackets are required as follows, depending on the number and position of the connection plug boards:

foldable cable tray T

The cable tray brackets supplied can simultaneously be used as connection plug board brackets.

Re, nG

OPTIONS

SUPPORTING PEDESTAL CONNECTION

CT supporting pedestals can be attached to the Workstation desks by means of support mounts with heights of 548 mm (9 He) and 598 mm (10 He). In this process, the slab-end is left off on the pedestal side, although the length of the frame remains unchanged. The length of the cable tray also remains the same.

A more obvious choice in connection with cable flap or sliding top. no top overlap is permitted on the pedestal side due to the danger of tipping. modesty panels are only permitted on the rear edge and if the desk depth is greater than the pedestal depth.

Possible positions of the supporting pedestal connection

FIXED PEDESTAL CONNECTION

The CT fixed pedestal with a height of 740 mm can be loosened from desks with height-adjustable or fixed-range height adjustment areas. Possible table depths for this are 600, 800, 900 and 1.000 mm. With 900 and 1.000 mm, the top of an 800 mm deep pedestal can be extended backwards by means of an overlap of the top.

The length of the frame remains unchanged.Back-fitting deconstruction to holder is only possible in certain circumstances. no excess overlap of the top is possible on the connection side. not possible for rectangle Re with Soft edge.

Possible positions of the fixed pedestal connection

OPTIONS

SIDEBOARD CONNECTION

The sideboard is used as a frame replacement and is possible with a maximum of 1 sideboard per desk. It is possible to form a connection with the sideboard from a desk width of 1.600 mm upwards. Insertion angle is always 90°. The minimum width of the sideboard depends on the depth of the desk and amounts to 1.200 mm or 1.600 mm.

The range of height adjustment in this regard only begins from 680 mm onwards. For reasons of stability and space, the sideboard is only permitted with the desktop shapes shown at the bottom.

Possible positions of sideboard connection

Re nG

COMMUNICATIONS SEGMENT

Assembly lateral over 2 desks material: Chipboard 19 / 25 mm or compact top 13 mm.

In the communication segment shown, the desks are arranged flush with no gap. When an RV dividing wall or panels between both desks are used, the width of the communication segment is automatically adjusted correspondingly.

EXCESS LENGTH OF DESK TOP

Depending on the shape of the table top, the table top can be enlarged in different directions by the specified dimensions. not available in combination with equal-sided 120° angle desk W3