DÉCAPAGE

It is a very useful technical process. Mainly acting on cosmetic color, it allows you to:

- Eliminate metallic effects, color opacity and unwanted reflections, improving brightness - LIGHT

- Lighten a cosmetic color overload and eliminate color build-up - MEDIUM

- Carry out a color change with a two level lightening - STRONG

LIGHT:

Smart - Apply Oxibes 0 Vol. 0% all over the hair. Evenly distribute a small amount of bleaching powder, taking care to cover each individual strand. It may be helpful to use a salt spreader or sieve.

Soft - Mix Oxibes 0 Vol. 0% with Decobes Powder, Cream, Oil in a 1:1 ratio. Apply to each individual strand using a brush.

Massage with your fingers and distribute the product with a wide-toothed comb. Leave on for 5-10 minutes. Rinse with water.

Shampoo or proceed with the desired toning.

MEDIUM:

Prepare the mix shown in the table below in a non-metallic bowl. On wet hair, apply the mixture obtained on the areas to be decolored. Let it process for 15/20 minutes, always keeping the process visually controlled. Once the desired result has been achieved, proceed with the complete elimination of the product and carry out a toning or a reflection.

STRONG:

Prepare the mix shown in the table below in a non-metallic bowl. On wet hair, apply the mixture obtained on the areas to be decolored. Let it process for 20/30 minutes, always keeping the process visually controlled. Once the desired result has been achieved, proceed with the complete elimination of the product and apply the chosen nuances following the most appropriate coloring method.