MAST CONNECTOR

It is extremely important that you assemble your foil properly. Assembling the product correctly will ensure the product performs well, is safe for users and will avoid unnecessary damage. • The tool you will need to assemble the foil is a Torx T40 Key. Do not use an electric screwdriver. • Apply a sufficient amount of marine grease onto all threads and undersides of the screw heads to avoid oxidation. • It is very important that you carefully tighten the screws evenly. Tighten the screws to 9 ±1 NM. • Do not overtighten screws as they are subject to extreme loads. • Screw tightness should be checked regularly.

FLIGHT OVERVIEW

Parts Included: 1. MAST PLATE 2. MAST 3. MAST CONNECTOR 4. FUSELAGE 5. BACK WING/STABILIZER 6. FRONT WING 7. TORX T40 KEY A. M8x20 (4x) B. M8x25 (2x) C. M8x30 (4x) D. M8x50 (4x) E. M8 NUT (4x)

A B C D E

6 1

2

3

4 5

STEP 1

Assemble and screw FRONT WING to FUSELAGE

SCREW M8x20 A M8x25

QTY 2 2

B

B