BACK WING/STABILIZER

It is extremely important that you assemble your foil properly. Assembling the product correctly will ensure the product performs well, is safe for users and will avoid unnecessary damage. • The tool you will need to assemble the foil is a Torx T40 Key. Do not use an electric screwdriver. • Apply a sufficient amount of marine grease onto all threads and undersides of the screw heads to avoid oxidation. • It is very important that you carefully tighten the screws evenly. Tighten the screws to 9 ±1 NM. • Do not overtighten screws as they are subject to extreme loads. • Screw tightness should be checked regularly.

SLASH OVERVIEW

Parts Included: 1. MAST 2. FLIP FUSELAGE 3. FUSELAGE CAP 4. BACK WING/STABILIZER 5. FRONT WING 6. TORX T40 KEY A. M8x20 (5x) B. M8x25 (3x) C. M8x30 (2x) E. M8 NUT(4x)

A B C E

5 2 1

3 4

STEP 1

Determine your riding characteristics:

With the asymmetrical FLIP CENTER FUSELAGE, you are able to change the riding characteristics of the foil.

Steering Wheel:

Facing the steering wheel towards the front wing will provide control, stability and ease of flight.

Wave Arrow:

Facing the wave arrow towards the front wing will provide maneuverability, aggressive turning and pump riding style.