SLASH ASSEMBLY INSTRUCTIONS
It is extremely important that you assemble your foil properly. Assembling the product correctly will ensure the product performs well, is safe for users and will avoid unnecessary damage. • The tool you will need to assemble the foil is a Torx T40 Key. Do not use an electric screwdriver. • Apply a sufficient amount of marine grease onto all threads and undersides of the screw heads to avoid oxidation. • It is very important that you carefully tighten the screws evenly. Tighten the screws to 9 ±1 NM. • Do not overtighten screws as they are subject to extreme loads. • Screw tightness should be checked regularly.
SLASH OVERVIEW Parts Included: 1. MAST 2. FLIP FUSELAGE 3. FUSELAGE CAP 4. BACK WING/STABILIZER 5. FRONT WING A. M8x20 (5x) B. M8x25 (3x) C. M8x30 (2x) E. M8 NUT(4x) F. TORX T40 KEY
1
4 3
A
B
C
D
2
E 5 F
STEP 1
Determine your riding characteristics:
With the asymmetrical FLIP FUSELAGE, you are able to change the riding characteristics of the foil. We recommend setting your FLIP FUSELAGE with the PUMP ARROW facing the FRONT WING to get started.
STEERING WHEEL:
Facing the STEERING WHEEL forward will create less distance between the mast and front wing, allowing for maneuverability and aggressive turning.
PUMP ARROW:
Facing the PUMP ARROW forward will create more distance between the mast and front wing, allowing for pump riding style, more lift, better stability, and control.
