photovoltaics
|plus
photovoltaics fotovoltaica ||bipv plus
Bio Plus The best panel of the world Aluminum hollow frame. 4mm special solar glass. Lower superficial temperature. Lower cell degradation. Auto-clean function. Anti-reflection treatment. High loading resistance. 100% free silicon. 10 years product warranty. 30 years performance warranty. A 5% higher production than the rest. Bars reinforcement.
043
MONO-CRISTALLINE
plus 175-195
photovoltaics fotovoltaica ||bipv plus BIOENERGY Solar Photovoltaic Panels stand for quality, durability and most importantly, high-performance. Our experience, capacity of research, continuing development and improvement have turned us into a company recognized in the sector by the high value offered to our clients. Due to their engineered hollow-section frame and its 4mm special solar glass (standard solar module has 3.2mm), BIOENERGY PLUS modules meet the maximum demands with regard to stability and corrosion resistance. Thanks to their high performance BIOENERGY PLUS modules are prepared for changes in legislation. These panels will produce 5% more than any other of the same features.
Electrical Characteristics
Reference Maximum power (Wp)
Dimensions 175
180
185
P111175
P111180
P111185
P111190
190
P111195
195
175Wp
180Wp
185Wp
190Wp
195 Wp
Max. power voltage (Vmax)
35.3
36.0
36.27
36.5
36.94
Max. power current (Imax)
4.96
5.00
5.10
5.20
5.28
Open circuit voltage (Voc)
44.20
44.80
45.00
45.20
45.08
5.20
5.30
Modulle Eff. (%) Operating temperature
13,70
14,10
Maximum system voltage
5.50 14,88 -40°C + 80°C
5.60
5.58
15,27
15.27 1580
Short circuit voltage (Isc)
808
1000 V(IEC)
Power tolerance (%)
0-3%
Mechanical Characteristics Solar Cells
Mono-crystalline
Dimensions
1580x808x40 mm
Weight
15,5 kg
Transparency
10%
No. Cells
72 cells (125 x 125 mm) configured geometrically for 6x12 matrix connected in series
Output cables length
900 mm
Cable cross section size
4 mm2
Construction Connectors
High Transmission, Low Iron, Tempered Glass 3.2 mm Compatible Type IV and Type III
No. of draining holes in frame
12
758
A
B 8- 9X14
800 1 A
Temperature Coefficients Nominal operating cell temperature (NOCT)
47 °C ± 2°C
Temperature coefficient of power (PMAX)
-0.43 %/°C
Temperature coefficient (VOC)
-0.31 %/°C
Temperature coefficient (ISC)
03 %/°C
Continuous wind pressure
<5400 Pa
The 10 years product warranty surpasses the warranty required by law. The performance warranty is for 30 years: after 12 years, modules still produce a minimumt 90% of their nominal performance, after 30 years modules still produce a minimum 80% or their nominal performance.
044
1300 1
2- 4
900
B
MONO-CRISTALLINE
plus 210-230
photovoltaics fotovoltaica ||bipv plus BIOENERGY Solar Photovoltaic Panels stand for quality, durability and most importantly, high-performance. Our experience, capacity of research, continuing development and improvement have turned us into a company recognized in the sector by the high value offered to our clients. Due to their engineered hollow-section frame and its 4mm special solar glass (standard solar module has 3.2mm), BIOENERGY PLUS modules meet the maximum demands with regard to stability and corrosion resistance. Thanks to their high performance BIOENERGY PLUS modules are prepared for changes in legislation. These panels will produce 5% more than any other of the same features.
Electrical Characteristics
Dimensions 215
220
225
230
Reference
P111210
P111215
P111220
P111225
P111230
Maximum power (Wp)
210 Wp
215 Wp
220 Wp
225 Wp
230 Wp
Max. power voltage (Vmax)
27.60
27.90
28.20
28.60
29.10
Max. power current (Imax)
7.60
7.70
7.80
7.85
7.90
Open circuit voltage (Voc)
33.00
33.30
33.70
33.90
34.40
Short circuit voltage (Isc)
8.48
8.60
8.70
8.85
8.90
Modulle Eff. (%) Operating temperature
14.3
14.6
15.0
15.3
15.6
992
1482
210
-40°C + 85°C
Maximum system voltage
1000 V(IEC) 0-3%
Power tolerance (%)
Mechanical Characteristics 942
A
B
Solar Cells
Mono-crystalline
Dimensions
1482 x 992 x 40 mm
Weight
15.5 kg
Junction Box
IP65
No. Cells
54 pcs (156 x 156 mm) Poly-Crystalline (6x9mm)
Output cables length
900 mm
Cable cross section size
4 mm2
Construction
High Transmission, Low Iron, Tempered Glass 4 mm
Bypass-Diodes
3 bypass
Connectors
MC4 compatible
Nominal operating cell temperature (NOCT)
47 °C ± 2°C
Temperature coefficient of power (PMAX)
-0.43 %/°C
Temperature coefficient (VOC)
-0.31 %/°C
Temperature coefficient (ISC)
0.03 %/°C <5400 Pa
700 1 A
The 10 years product warranty surpasses the warranty required by law. The performance warranty is for 30 years: after 12 years, modules still produce a minimumt 90% of their nominal performance, after 30 years modules still produce a minimum 80% or their nominal performance.
045
1100 1
900
B
2- 4
Temperature Coefficients
Continuous wind pressure
8- 9X14
MONO-CRISTALLINE
plus 235-250
photovoltaics fotovoltaica ||bipv plus BIOENERGY Solar Photovoltaic Panels stand for quality, durability and most importantly, high-performance. Our experience, capacity of research, continuing development and improvement have turned us into a company recognized in the sector by the high value offered to our clients. Due to their engineered hollow-section frame and its 4mm special solar glass (standard solar module has 3.2mm), BIOENERGY PLUS modules meet the maximum demands with regard to stability and corrosion resistance. Thanks to their high performance BIOENERGY PLUS modules are prepared for changes in legislation. These panels will produce 5% more than any other of the same features.
Electrical Characteristics
Dimensions 235
Reference
240
245
250
P111235
P111240
P111245
P111250
240 Wp
245 Wp
250 Wp
30.80
31.10
31.40
31.85
Max. power current (Imax)
7.64
7.73
7.81
7.85
Open circuit voltage (Voc)
36.60
37.00
37.30
37.66
Short circuit voltage (Isc)
8.55
8.65
8.75
8.85
Modulle Eff. (%) Operating temperature
14.3
14.6
14.9
15.30 1655
235 Wp
Max. power voltage (Vmax)
Maximum power (Wp)
992
-40°C + 85°C
Maximum system voltage
1000 V(IEC) 0-3%
Power tolerance (%)
Mechanical Characteristics Solar Cells
Mono-crystalline
Dimensions
1655 x 992 x 45 mm
Weight
22.5 kg
Junction Box
IP65
No. Cells
60 pcs (156 x 156 mm) Poly-Crystalline (10x8mm)
Output cables length
900 mm
Cable cross section size
4 mm2
Construction
High Transmission, Low Iron, Tempered Glass 4 mm
Bypass-Diodes
3 bypass
Connectors
MC4 compatible
A
8- 9X14
Temperature Coefficients Nominal operating cell temperature (NOCT)
47 °C ± 2°C
Temperature coefficient of power (PMAX)
-0.43 %/°C
Temperature coefficient (VOC)
-0.31 %/°C
Temperature coefficient (ISC)
0.03 %/°C <5400 Pa
Continuous wind pressure
942 B
The 10 years product warranty surpasses the warranty required by law. The performance warranty is for 30 years: after 12 years, modules still produce a minimumt 90% of their nominal performance, after 30 years modules still produce a minimum 80% or their nominal performance.
046
725 1 A
1225 1
2- 4
1000
B
MONO-CRISTALLINE
plus 280-300
photovoltaics fotovoltaica ||bipv plus BIOENERGY Solar Photovoltaic Panels stand for quality, durability and most importantly, high-performance. Our experience, capacity of research, continuing development and improvement have turned us into a company recognized in the sector by the high value offered to our clients. Due to their engineered hollow-section frame and its 4mm special solar glass (standard solar module has 3.2mm), BIOENERGY PLUS modules meet the maximum demands with regard to stability and corrosion resistance. Thanks to their high performance BIOENERGY PLUS modules are prepared for changes in legislation. These panels will produce 5% more than any other of the same features.
Electrical Characteristics
Dimensions 280
285
290
300
Reference
P111280
P111285
P111290
P111300
Maximum power (Wp)
280 Wp
285 Wp
290 Wp
300 Wp
Max. power voltage (Vmax)
33.80
34.10
34.40
35.00
Max. power current (Imax)
8.29
8.36
8.44
8.58
Open circuit voltage (Voc)
40.2
40.40
40.70
41.30
Short circuit voltage (Isc)
9.10
9.15
9.20
9.30
Modulle Eff. (%) Operating temperature
14.5
14.7
14.9
15.50
992
1956
-40°C + 85°C
Maximum system voltage
1000 V(IEC) 0-3%
Power tolerance (%)
Mechanical Characteristics Solar Cells
Mono-crystalline
Dimensions
1956 x 992 x 45 mm
Weight
26 kg
Junction Box
IP65
No. Cells
72 pcs (156 x 156 mm) Poly-Crystalline (6x12mm)
Output cables length
900 mm
Cable cross section size
4 mm2
Construction
High Transmission, Low Iron, Tempered Glass 4 mm
Bypass-Diodes
3 bypass
Connectors
MC4 compatible
942
A
B 8- 9X14
1176 1 A
Temperature Coefficients Nominal operating cell temperature (NOCT)
47 °C ± 2°C
Temperature coefficient of power (PMAX)
-0.43 %/°C
Temperature coefficient (VOC)
-0.31 %/°C
Temperature coefficient (ISC)
0.03 %/°C <5400 Pa
Continuous wind pressure
The 10 years product warranty surpasses the warranty required by law. The performance warranty is for 30 years: after 12 years, modules still produce a minimumt 90% of their nominal performance, after 30 years modules still produce a minimum 80% or their nominal performance.
047
1676 1
2- 4
1000
B
POLY-CRISTALLINE
plus 200-220
photovoltaics fotovoltaica ||bipv plus BIOENERGY Solar Photovoltaic Panels stand for quality, durability and most importantly, high-performance. Our experience, capacity of research, continuing development and improvement have turned us into a company recognized in the sector by the high value offered to our clients. Due to their engineered hollow-section frame and its 4mm special solar glass (standard solar module has 3.2mm), BIOENERGY PLUS modules meet the maximum demands with regard to stability and corrosion resistance. Thanks to their high performance BIOENERGY PLUS modules are prepared for changes in legislation. These panels will produce 5% more than any other of the same features.
Electrical Characteristics
Dimensions 205 P121205
210 P121210
215 P121215
200
205
210
215
220
Max. power voltage (Vmax)
26.84
27
27.3
28.6
27.9
Max. power current (Imax)
7.45
7.6
7.7
7.8
7.9
Open circuit voltage (Voc)
32.7
33
33.3
33.8
34.2
Short circuit voltage (Isc)
8.16
8.28
8.4
8.5
8.6
Modulle Eff. (%) Operating temperature
13.6
14
14.28
14.6
14.96
Maximum power (Wp)
992
220 P121220
1482
Reference
200 P121200
-40°C + 85°C
Maximum system voltage
1000 V(IEC) 0-3%
Power tolerance (%)
Mechanical Characteristics 942
Solar Cells
Poly-crystalline
Dimensions
1655x992x45 mm
Weight
22.5 kg
Junction Box
IP65
No. Cells
60 pcs (156 x 156 mm) Poly-Crystalline (6x10mm)
Output cables length
900 mm
Cable cross section size
4 mm2
Construction
High Transmission, Low Iron, Tempered Glass 4 mm
Bypass-Diodes
3 bypass
Connectors
MC4 compatible
A
B 8- 9X14
700 1 A
Temperature Coefficients Nominal operating cell temperature (NOCT)
47 °C ± 2°C
Temperature coefficient of power (PMAX)
-0.40 %/°C
Temperature coefficient (VOC)
-0.30 %/°C
Temperature coefficient (ISC)
0.4 %/°C <5400 Pa
Continuous wind pressure
The 10 years product warranty surpasses the warranty required by law. The performance warranty is for 30 years: after 12 years, modules still produce a minimumt 90% of their nominal performance, after 30 years modules still produce a minimum 80% or their nominal performance.
048
1100 1
2- 4
900
B
POLY-CRISTALLINE
plus 225-245
photovoltaics fotovoltaica ||bipv plus BIOENERGY Solar Photovoltaic Panels stand for quality, durability and most importantly, high-performance. Our experience, capacity of research, continuing development and improvement have turned us into a company recognized in the sector by the high value offered to our clients. Due to their engineered hollow-section frame and its 4mm special solar glass (standard solar module has 3.2mm), BIOENERGY PLUS modules meet the maximum demands with regard to stability and corrosion resistance. Thanks to their high performance BIOENERGY PLUS modules are prepared for changes in legislation. These panels will produce 5% more than any other of the same features.
Electrical Characteristics
Dimensions 230
235
240
245
Reference
P121225
P121230
P121235
P121240
P121245
Maximum power (Wp)
225Wp
230Wp
235Wp
240Wp
245Wp
Max. power voltage (Vmax)
30
30.2
30.5
30.8
31.1
Max. power current (Imax)
7.5
7.62
7.71
7.8
7.89
Open circuit voltage (Voc)
36.6
36.9
37
37.2
37.4
Short circuit voltage (Isc)
8.2
8.31
8.4
8.55
8.65
Modulle Eff. (%) Operating temperature
13.7
14
14.3
14.6
14.9
992
1655
225
-40°C + 85°C
Maximum system voltage
1000 V(IEC) 0-3%
Power tolerance (%)
Mechanical Characteristics Solar Cells
Poly-crystalline
Dimensions
1655 x 992 x 40 mm
Weight
22.5 kg
No. Cells
60 pcs (156 x 156 mm) Poly-Crystalline (6x10mm)
Output cables length
900 mm
Cable cross section size
4 mm2
Construction
High Transmission, Low Iron, Tempered Glass 4 mm
Bypass-Diodes
3 bypass
Connectors
MC4 compatible
942
A
B 8- 9X14
725 1 A
Temperature Coefficients Nominal operating cell temperature (NOCT)
47 °C ± 2°C
Temperature coefficient of power (PMAX)
-0.40 %/°C
Temperature coefficient VOC
-0.30 %/°C
Temperature coefficient ISC
0.04 %/°C <5400 Pa
Continuous wind pressure
The 10 years product warranty surpasses the warranty required by law. The performance warranty is for 30 years: after 12 years, modules still produce a minimumt 90% of their nominal performance, after 30 years modules still produce a minimum 80% or their nominal performance.
049
1225 1
2- 4
900
B
POLY-CRISTALLINE
plus 260-280
photovoltaics fotovoltaica ||bipv plus BIOENERGY Solar Photovoltaic Panels stand for quality, durability and most importantly, high-performance. Our experience, capacity of research, continuing development and improvement have turned us into a company recognized in the sector by the high value offered to our clients. Due to their engineered hollow-section frame and its 4mm special solar glass (standard solar module has 3.2mm), BIOENERGY PLUS modules meet the maximum demands with regard to stability and corrosion resistance. Thanks to their high performance BIOENERGY PLUS modules are prepared for changes in legislation. These panels will produce 5% more than any other of the same features.
Electrical Characteristics
Dimensions 265
270
275
280
P121260
P121265
P121270
P121275
P121280
260Wp
265Wp
270Wp
275Wp
280Wp
Max. power voltage (Vmax)
35.60
35.80
36.10
36.37
38.60
Max. power current (Imax)
7.30
7.40
7.48
7.56
7.66
Open circuit voltage (Voc)
43.50
43.50
43.60
44.00
44.20
Reference Maximum power (Wp)
Short circuit voltage (Isc)
8.05
8.10
8.20
8.20
8.26
Modulle Eff. (%) Operating temperature
13.40
13.70
13.90
14.20
14.40
992
1956
260
-40°C + 80°C
Maximum system voltage
1000 V(IEC) 0-3%
Power tolerance (%)
Mechanical Characteristics 942
Poly-crystalline
A
B 8- 9X14
Dimensions
1956 x 992 x 40 mm
Weight
26 kg
No. Cells
72 pcs (156 x 156 mm) Poly-Crystalline (6x12mm)
Output cables length
900 mm
Cable cross section size
4 mm2
Construction
High Transmission, Low Iron, Tempered Glass 4 mm
Bypass-Diodes
3 bypass
Connectors
MC4 compatible A
Temperature Coefficients Nominal operating cell temperature (NOCT)
47 °C ± 2°C
Temperature coefficient of power (PMAX)
-0.40 %/°C
Temperature coefficient VOC
-0.30 %/°C
Temperature coefficient ISC
0.04 %/°C <5400 Pa
Continuous wind pressure
The 10 years product warranty surpasses the warranty required by law. The performance warranty is for 30 years: after 12 years, modules still produce a minimumt 90% of their nominal performance, after 30 years modules still produce a minimum 80% or their nominal performance.
050
1676 1
2- 4
1176 1
B
1000
Solar Cells