IN ORDER TO MAKE YOUR MARK ON THE WORLD, YOU OFTEN HAVE TO MAKE A VOYAGE FROM THE FAMILIAR INTO FAR OFF PLACES WHERE FEW HAVE VENTURED OR EVEN DARED. THESE JOURNEYS ARE NECESSARY TO DISCOVER OUR TRUE SELVES AND GROW OUR KNOWLEDGE OF THE WORLD AROUND US. WE HAVE DEVELOPED A PLATFORM THAT WILL HELP YOU TAKE THAT JOURNEY. A BOTE LIKE NO OTHER, THAT WILL TAKE YOU FARTHER, FASTER THAN ANYTHING WE HAVE EVER CREATED.
WE CALL IT ROVER.
| PADDLE TO POWER
4
GO FARTHER.
IT’S A STAND UP PADDLE BOARD. IT’S A MICROSKIFF. IT’S EVERYTHING IN BETWEEN. NO MATTER WHAT YOU CALL IT, ONE THING’S FOR SURE, IT’S A BOTE. THE ROVER’S REVOLUTIONARY MODULAR RACS ALLOW THIS BOARD TO GO FROM PADDLE TO POWER IN SECONDS ... A POWERBOARD™. BOTEBOARD.COM
5
ROVER | FEATURES | THICK RAILS
| SUNKEN COCKPIT Shaped to lower your center of gravity while side rails contain deck items.
| HULL FEATURES
| FCSII FIN SYSTEM
Improves stability by increasing volume along the rails.
| HONEYCORE Reinforement.
Keyless, snap in side fins.
| LIFT BAR Powdercoated aluminum bar for lifting and safety from motor.
| POWER WELL Inset power well improves performance and safety.
| RUNNING CHINES
Designed to break the surface tension of the water for better tracking and speed.
Designed to channel water for increased stability at speed.
| WHEEL RAC RECEIVERS Use BOTE’s Wheel Rac for easy transportation. *Wheel Set sold separately.
6
| DEEP-V NOSE ENTRY
| HONEYCORE Reinforement.
| DECK FEATURES | POWER-POLE® MICRO Compatible using pre-installed mounting holes. Starboard or port mounting locations.
| BVA FOAM DECK PAD Heat embossed “B” logo textured traction.
| CONNEX SUP Accessory mounting system.
* Power-Pole® Micro sold separately.
* ALL RAIL AND FRONT DECK PLUGS ARE CONNEXSUP FOR FULL MODULARITY.
| TIE DOWN POINTS Integrated tie down points for securing coolers and other gear.
| STASHPOD Watertight storage and a place to keep your stash.
| BUNGEE STRAPS Adjustable bungee straps to secure extra gear.
| LIFT-SUP HANDLE Pop-up carry handle and tie-off cleat.
| MOTORAC Integrated mounting receivers for Moto Rac installation.
| PADDLE SHEATH | SANDSPEAR / PADDLE LASH POINTS To lash your Sandspear or paddle to the deck. Molle loops for additional lashing points.
| SANDSPEAR TRU-HOLE Stake-out hole to utilize BOTE’s Sandspear. * SandSpear sold separately.
Insert your paddle blade and free up your hands.
| AFT RAC RECEIVERS : GRAB RAC, TACKLE RAC & BUCKET RAC COMPATIBILITY Integrated mounting receivers for Rac installation. * Racs sold separately.
BOTEBOARD.COM
7
| POWER-POLE® MICRO | KULA | BUCKET RAC
| MOTORAC
ROVER CLASSIC EPOXY SHOWN WITH OPTIONAL SET-UP. SOME ACCESSORIES ARE SOLD SEPARATELY.
8
| PADDLE SHEATH | GRAB RAC | BUNGEE STRAPS
| LIFT-SUP HANDLE | CONNEX SUP ATTACHMENT POINTS
| DEEP-V NOSE ENTRY | VERTEBRAE PUSH POLE HOLDERS
BOTEBOARD.COM
9
ROVER
DIMENSIONS > LENGTH 14’ : WIDTH 40” : COCKPIT DEPTH 6” : WEIGHT 105LBS
CLASSIC EPOXY: We have taken our traditional epoxy construction to the next level. With multiple layers of fiberglass and advanced composite fabrics the epoxy construction is incredibly light and durable.
10
BUG SLINGER™ EDITION / EPOXY
MAX CAPACITY 500LBS (MOTOR, GEAR, PEOPLE) : MAX OUTBOARD 6HP : SPEED : 16 MPH, W/ 6HP MERCURY 4-STROKE, 200LBS OF LOAD : MOTOR TRIMMED DRAFT 3”
BOTEBOARD.COM
11
ROVER
REALTREE® / EPOXY 12
BOTEBOARD.COM
13
ROVER | ACCESSORIES
ONE OF THE MOST UNIQUE ATTRIBUTES OF THE ROVER IS THE ABILITY TO ACCESSORIZE IT TO FIT YOUR STYLE AND NEEDS. WE HAVE UTILIZED EXISTING BOTE ACCESSORIES, NEWLY ENGINEERED ACCESSORIES AND OTHER INDUSTRY LEADING ADDITIONS TO MAKE THE ROVER PLATFORM THE MOST MODULAR WATERCRAFT ON THE PLANET. 14
| MOTO RAC THE MOTO RAC IS THE CORE FEATURE OF THE ROVER. IT IS THE SINGLE ACCESSORY THAT MAKES THE LEAP FROM PADDLE TO POWER. BY SIMPLY INSERTING THE MOTO RAC INTO THE INTEGRATED RECEIVERS, YOUR ROVER IS READY TO RIDE. THE MOTO RAC IS ENGINEERED WITH 2 ROD HOLDERS AND 2 - 1 GALLON ROTOPAX™ MOUNTS.
• • • •
MATERIAL :: MARINE GRADE ALUMINUM FINISH :: POWDER COATED BLACK WEIGHT :: 6 POUNDS CAPACITY :: TWO SLOTTED FISHING ROD HOLDERS FOR FLY OR SPINNING REELS. 2 ROTOPAX MOUNTS.
* ROTOPAX™ AND MOUNTS SOLD THROUGH ROTOPAX™
BOTEBOARD.COM
15
| GRAB RAC A NEWLY ENGINEERED FEATURE FOR THE ROVER IS THE GRAB RAC. INSERT INTO ANY OF THE RAC RECEIVERS TO FURTHER ENHANCE YOUR ADVENTURE. USE IT AS SUPPORT WHILE RUNNING OR AS YOU MOVE AROUND THE DECK. NYLON MOLLE LOOPS ARE RIVETED TO THE MARINE GRADE ALUMINUM RISERS TO ALLOW FOR MULTIPLE GEAR ATTACHMENT POINTS. THE D
BVA FOAM HOOK CADDY WILL KEEP YOUR GO-TO FLIES AND LURES EASILY ACCESSIBLE.
D
C
C
B
B
• • • •
A
PROPRIETARY AND CONFIDENTIAL
16
MATERIAL :: MARINE GRADE ALUMINUM FINISH :: POWDER COATED BLACK WEIGHT :: 4 POUNDS CAPACITY :: TWO SLOTTED FISHING ROD HOLDERS FOR FLY OR SPINNING REELS. BVA FOAM HOOK CADDY, NYLON MOLLE LOOPS.
A
| TACKLE RAC BOTE’S ORIGINAL INNOVATION, THE TACKLE RAC, SLIDES INTO ANY TACKLE RAC COMPATIBLE BOARD IN LESS THAN FIVE SECONDS AND INSTANTLY TRANSFORMS YOUR BOTE
BOARD INTO THE ULTIMATE
FISHING AND ADVENTURE SKIFF. WEIGHING IN AT JUST 4LBS, THE FULLY WELDED, MARINE GRADE ALUMINUM TACKLE RAC IS THE PERFECT COMPANION FOR YOUR NEXT FISHING TRIP, A DAY ON THE WATER OR EXPEDITION. KEEPING YOUR GEAR AND RODS HIGH AND DRY ALL DAY LONG.
WHITE
• • • •
SEAFOAM
BLACK
MATERIAL :: MARINE GRADE ALUMINUM FINISH :: POWDER COATED WEIGHT :: 4 POUNDS CAPACITY :: TWO SLOTTED FISHING ROD HOLDERS FOR FLY OR SPINNING REELS. BOTEBOARD.COM
17
| BUCKET RAC THE
BUCKET RAC
WRAPS
AROUND
A
STANDARD
FIVE-GALLON
BUCKET OR EVEN BETTER, A KULA COOLER. BOTH ARE GREAT FOR TRANSPORTING BAIT, CAST NETS, GEAR AND IN THE KULA’S CASE - BEER AND REFRESHMENTS. THIS UNIQUELY SHAPED ACCESSORY WORKS PERFECTLY IN THE FRONT AND REAR TACKLE RAC RECEIVERS ON ALL OF OUR TACKLE RAC COMPATIBLE BOARDS, FOR SECURING YOUR STUFF, KEEPING YOUR RODS HANDY AND AS A SEAT.
WHITE
SEAFOAM
BLACK
• MATERIAL :: MARINE GRADE ALUMINUM • FINISH :: POWDER COATED • WEIGHT :: 5.5 POUNDS • COMPATIBILITY :: FITS MOST 5-GALLON BUCKETS PLUS KULA 5 COOLER COMPATIBLE • CAPACITY :: FOUR SLOTTED FISHING ROD HOLDERS FOR FLY OR SPINNING REELS.
18
| KULA COOLER
Yeah, it’s round and well, why shouldn’t it be? We figured since all your drinks are round it only made sense. The KŪLA is a tool for your life, it’s lightweight, easy to carry, tough as hell and designed to keep ice till the cows come home. From a comfortable seat, casting platform or portable live-well, the KŪLA is the perfect companion to your ROVER.
This Product Has Been Certified By The Gator Proof Alliance (GPA) A US Swamp Service • Dept. Of Aquaculture Committee These claims are entirely fictitious and you should never let an alligator near your KŪLA. Gators can be dangerous.
BOTEBOARD.COM
19
| WHEEL RAC AFTER A LONG DAY ADVENTURING ON THE WATER IT WOULD BE NICE TO HAVE AN EASY WAY TO TRANSPORT YOUR ROVER BACK TO YOUR VEHICLE OR STORAGE AREA. ENTER THE WHEEL RAC. EASILY SLIP THE WHEEL RAC INTO THE HULL RECEIVERS AND ROCK & ROLL. WITH THE OVERSIZED BALLOON TIRES, THE ROVER WILL GLIDE OVER ALMOST ANY TERRAIN WITH MINIMAL EFFORT. • MATERIAL :: MARINE GRADE ALUMINUM • FINISH :: POWDER COATED BLACK • SPECS :: 12” DIAMETER POLYURETHANE BALLON TIRES • WEIGHT :: 12 POUNDS • CAPACITY :: 250LBS. MAX LOAD
20
| CONNEXSUP ONE SYSTEM, ENDLESS POSSIBILITIES. CONNECT ALL YOUR ACCESSORIES: CAMERAS, STRAPS, COOLERS, GPS, FISH FINDERS, IPOD’S, IPAD’S, PFD’S, OR WHATEVER YOU CAN IMAGINE WITH THIS SIMPLE SOLUTION THAT HAS REINVENTED THE WAY WE CONNECT TO OUR SPORT.
#2
INSTALLED THROUGHOUT THE ROVER’S DECK, THE CONNEXSUP PLUGS #1
ARE INSPIRED BY THE NEED FOR A SIMPLE SOLUTION TO MOUNTING AN OVERWHELMING NUMBER OF ACCESSORIES BEING OFFERED IN THE MARKETPLACE. THE SYSTEM IS MADE OF BALLISTIC STRENGTH REINFORCED INJECTION MOLDED POLYCARBONATE AND USES A UNIVERSAL BASE THAT HOSTS ANY NUMBER OF ATTACHMENTS THAT ALLOW YOU TO FULLY CUSTOMIZE YOUR ROVER AND GET THE MOST OUT OF YOUR EQUIPMENT.
SHOWN ABOVE IN THE ROVER DECK UTILIZING A 1) LEASH PLUG INSERT AND A 2) QUARTER-TWENTY THREAD INSERT.
ACTUAL SIZE WITH LEASH PLUG INSERT
SHOWN WITH OPTIONAL INSERTS AND RAM MOUNT® MOUNTING BALLS BOTEBOARD.COM
21
| VERTEBRAE THE BOTE VERTEBRAE PUSH POLE ROLLERS ARE THE PERFECT WAY TO STOW YOUR SANDSPEAR ALONG THE RAIL OF THE ROVER. THE VERTEBRAE SIMPLY SCREW INTO THE OFFSET CONNEXSUP ATTACHMENT POINTS ALONG EITHER RAIL AND THE SANDSPEAR NESTLES IN BETWEEN THEM AS SHOWN BELOW.
22
| SANDSPEAR THE BOTE SANDSPEAR IS A VERSATILE STAKEOUT / PUSH POLE FOR USE IN ALL SHALLOW WATER ACTIVITIES. UTILIZE THE STAKE OUT FUNCTION BY SIMPLY INSERTING THE SPIKE SIDE DOWN THROUGH THE STAKE OUT HOLES OR POWER-POLE MICRO® TO ANCHOR IT IN PLACE. WHEN YOU WANT TO CREEP SILENTLY ACROSS A FLAT, TURN THE SANDSPEAR AROUND AND PUSH YOUR ROVER WITH THE FOOT END. * THE 3/4” DIAMETER SANDSPEAR CAN BE USED WITH THE POWER-POLE® MICRO - REPLACING THE POWER-POLE® MICRO SPIKE. * IF NEEDED, THE SANDSPEAR CAN BE CUT AND RESHARPENED.
| 8’
| FOOT END
| CUSHION GRIP
| FIBERGLASS SPEAR
| SPIKE END
BOTEBOARD.COM
23
24
BOTEBOARD.COM
25
AVAILABLE SUMMER 2017
BOTE BOARD LLC. 505 MARY ESTHER CUT OFF NW FORT WALTON BEACH, FL 32548 :: ph. 888-855-4450