Breton Journal MARMOMACC 2014 English by Breton SpA

Journal EDIZIONE 2014

➜ Breton 01 PA R AG O N |

Page 4 - 7

the perfect multiwire machine

➜ Breton 02 BRE TON TO U C H |

Page 8 - 9

the user interface everyone was waiting for

➜ Breton 03 WO R T H Y M O N O B LO C K B R I D G E SAW | CNC bridge saw for stone

FOR MORE INFO:

www.breton.it

Page 10 - 11

NEW

Breton TOUCH /

Page 8 - 9

THE USER INTERFACE EVERYONE WAS WAITING FOR

NEW

Breton WORTHY / MONOBLOCK BRIDGE SAW Page 10 - 11

BRETON PLUG AND PLAY BRIDGE SAW 2

Breton PREVIEW

a ll t he ne w s o n w w w.breto n.it

Three first previews at Marmomacc 2014 Breton PARAGON /

Page 4 - 7

THE PERFECT MULTIWIRE MACHINE NEW

Drums The five rotating drums of Paragon, all of which have a diameter of 1,000 mm, guarantee minimum wire fatigue. The rigidity of the structure and the isosceles triangular geometry with wires just 20 metres long guarantees lower wire vibrations while cutting, leading to higher cutting quality and longer service life of the rubber profiles.

The load-bearing structure The drums and pulleys are installed inside a rigid, boxed steel structure, which runs along the load-bearing columns, stiffly anchored to the ground and stabilized with steel tie rods that ensure a next-to-nothing deformation for the cutting purposes. This constructive architecture means we can use columns with a section of 700 x 700 mm, which offer the same structural stability as columns with a section of 1.300 x 1.300 mm without steel tie rods. Column deformation while cutting has been checked using finite element mathematical calculations.

Wire driving drums Breton patented the independent, motorized positioning of the two wires driving drums, available as an option. Each wire driving drum can get as close to the block as 60 cm, therefore they can be positioned nearest the block. This means that: - the cutting quality is always the best - the down feed is always the fastest.

➜

a ll t he ne w s o n w w w.breto n.it

B re reton PARAGON

PARAGON - The perfect multiwire machine The dictionary definition of “paragon” is: “model of excellence or perfection of a kind” We chose the name Paragon as this multiwire machine has been entirely designed and built in Breton and is the result of all the experience and know how acquired after installing over 200 Breton/Bidese multiwire machines all over the world. In the multiwire sector, our Paragon has become a “model of excellence”. Paragon’s key features Isosceles triangular wire geometry with just five transmission (drums/pulleys), the minimum number compatible with the

PA R A G O N

Breton

necessary presence of the wire driving drums. All the drums, including the wire stretching pulleys, have a diameter of 1.000 mm. Adjustable wire driving drums with motor-driven movement so as to be always close to the block. Designed to maximize the operator ergonomic comfort: • Easy access to the machine with practical staircases and gangways • Fast and easy wire change and positioning • Immediate and intuitive operator interface of the touch screen for machine management.

Max. cutting width

Pitch groove wire driving

9,7

Wire pitch for sawing 20 mm thickness

29,1

Wire pitch for sawing 30 mm thickness

38,8

1600 / 6 /F30 / 44

1600 / 6 / F20 / 60

1600 / 6 / V / 59

1600 / 7 / F30 / 42

1600 / 7 / F20 / 58

1600 / 7 / V / 56

2000 / 6 / F30 / 52

2000 6 / F20 / 71

2000 / 6 / V / 70

1891,5 1881,0 1886,5 1925,1 1911,0 1912,5 1600,5 1624,5 1578,5 1618,2 1610,7 1612,5

Max. number of wires for sawing 20 mm thickness

Max. number of wires for sawing 30 mm thickness Output: number of slabs 20 mm thick per linear metre Output: number of slabs 30 mm thick per linear metre Motor power

250

Machine length

Machine width

Automatic wire installation - AN ABSOLUTE FIRST A patented, simple and ingenious motorized device makes the automatic wire installation very fast and safe for just three operators. The system includes an automatic laser tracer which shows the operator in which groove of the rubber profiles of the driving and driven drums the wires should be positioned.

2000 / 7 / F30 / 50

PARAGON

2000 / 7 / F20 / 67

2000 / 7 / V / 66

Wire stretching pulleys The wire stretching pulleys, one for each wire and rotating on bearings, are individually driven by a single hydraulic piston ensuring a uniform and constant tension of each wire. The arc of movement of the wire stretching pulleys is very large, therefore the wire installation is very easy and any complicated pre-stretching system has been eliminated.

34,4

9,3 28,5

27,9 38,5

67 35,1

25,8

27,3

37,2 70

9,7 37,5 71

52 35,8

26,0

26,9

250

200

1150

780

Machine height

700

Total mass (indicative)

Ton

29,1

36,6

28,5

38,8 56

9,3 38,5 58

42 34,4

26,7

25,8

200

160

200

1150

780

700

27,9 37,2 59 42

35,1

27,3 37,5 60

44 35,8

44 36,6

26,0

26,9

26,7

200

160

132

1150

780

750

700

Rubber profiles Rubber profiles are two-tone (red and gray) to simplify the installation of the wires. Two profile versions are available to meet the customer’s requirements: - three-groove profile alternated with a single-groove profile, which guarantee a longer service life of the profiles as they have thicker “side walls” and are specifically designed for sawing thicknesses of 20 and 30 mm. A sequence of at least four slabs 20 mm thick or three slabs 30 mm thick must be positioned with this particular combination of grooves - three-groove profiles to guarantee the greatest versatility in the thickness cutting sequence.

Operator interface The large colour touch screen makes programming the machine and controlling the processing phases intuitive and user friendly. All the work settings and parameters can be controlled and displayed on simple pages with big, clearly visible characters. The “statistics” section lets you display and extract all the data required to manage sawmill and diamond wires, which feature a wisely structured architecture whether you saw blocks for your own company or for third parties.

PA R A G O N

a ll t he ne w s o n w w w.breto n.it

9,7 29,1

9,3 28,5

38,8 40

38,5 40

30 34,4

27,9

30 35,1

25,8

27,3

26,9

800 / 7 / F30 / 22

800 / 6 / V / 30

800 / 6 / F20 / 31

800 / 6 / F30 / 23

600 / 7 / V / 22

600 / 7 / F20 / 23

600 / 7 / F30 / 17

600 / 6 / V / 23

600 / 6 / F20 / 24

600 / 6 / F30 /17

826,5

808,5

809,1

819,0

825,0

611,1

627,0

616,0

613,8

627,9

600,0

29,1 37,5

30 35,8

814,8 9,7

37,2 41

800 / 7 / F20 / 30

1134,9 1111,5 1116,5 1116,0 1119,3 1125,0

800 / 7 / V / 29

1000 / 6 / F30 / 31

1000 / 6 / F20 / 42

1000 / 6 / V / 41

1000/ 7 / F30 / 30

1000 / 7 / F20 / 40

1000/ 7 / V / 40

Exceptional machine accessibility for operators Footbridges with wide staircases and gangways make it easy and safe for operators to reach all parts of the machine when installing wires or perform servicing.

36,6

28,5

38,8 29

9,3 38,5 30

21 34,4

26,7

25,8

27,9

35,1

27,3

37,2 30

9,7 37,5 31

22 35,8

26,0

26,9

29,1

36,6

28,5

38,8 22

9,3 38,5 23

16 34,4

26,7

25,8

27,9 37,2 23 17

35,1

27,3 37,5 24

17 35,8

26,0

26,9

17 36,6 26,7

160

132

160

132

160

132

110

1150

1100

700

650

700

Breton Touch is the user interface for managing the Apps that enable the marble technologist to process slab products. Breton Touch is installed on the machine, in a control panel with multitouch colour monitor, and allows to program straight away the machining operations in a simple and intuitive way. Users are guided throughout their work since the Apps describe step by step the different development stages of the product, from drawing to processing. “Slab Editor” is the App that, controlling the digital camera installed on the machine, enables to acquire the slab image and draw its perimeter and defects by simply finger touching them on the multi-touch monitor. The slab is saved in a database containing its whole story: to which job order the slab is assigned, which are the pieces produced, what is the slab classification, etc.

Even lacking the digital camera, it is however possible to define the slab useful area by entering the detected dimensions. Once the slab parameters are defined, the “Cut Scheme” App arranges the cutting scheme in the best possible way either through the automatic nesting or manually entering with a simple finger touch the pieces which can be moved , rotated or coupled with other pieces thanks to the automatic snap. At this stage, the arranged scheme is automatically analyzed and optimized. The “Cut Move Editor” App calculates the cutting sequence and the different handling operations needed for its execution. This App controls the vacuum cups of the casing and activates only those which are needed to pick up the template safely and precisely. The most demanding user can also modify the cutting sequence and relevant handling operations by finger dragging portions of slab or

➜

a ll t he ne w s o n w w w.breto n.it

B re t o n T O U C H

Breton Touch, the user interface everyone was waiting for

BRETON TOUCH

Breton

selecting the cuts required as if the machine was an extension of his hand. With the “Shape Editor” App it’s finally possible to draw using just a finger; this App is a multi-touch CAD installed on the machine and is used to import files, draw templates and design tops by means of practical parametric shapes. “Slab Selector” is an intuitive and simple to use App for managing the slab database and preview, search and select the slab photos. “DB Orders” is the App for managing the order database; here it is possible to see which are the pieces to produce and the required materials, and select the slabs to be used. Each App is provided with a Multimedia Help assisting the user in a practical and efficient way. Shortly, Breton Touch will also offer access to the “Maintenance and Parts” App, the interactive mode to log into the operating and maintenance handbook.

11 9

No more foundations! The machine needs no foundations: it is simply ground-fixed. The advantages are: machine rapid starting, foundation cost saving and transport easiness since, in the future, you may move your machine wherever you desire, both rapidly and economically.

worktable remains fixed. The advantage is both a matchless cutting accuracy and speed and a machine featuring smaller sizes.

User-friendly The machine is operated by a software within everyone’s reach, displayed on a touch-screen video and equipped with a control console with joysticks to move the different work axes in an intuitive way.

Inclined disk The disk can be manually inclined in any position, from 0° to 90°, to perform inclined cuts, both in the plunge-cut and step-cut mode.

360° revolving head The cutting spindle revolves by 360° around its axis, while the

Laser tracer Laser tracer to display the cutting directions.

Tilting table On request, the worktable table can be tilting.

â&#x17E;&#x153;

B re t o n W O R T H Y - M O N O B L O C K B R I D G E S A W

WORTHY - CNC bridge saw for stone Numerical control bridge saw with revolving head and fixed, single-piece worktable that needs no foundations

a ll t he ne w s o n w w w.breto n.it

W OR THY MONOBLOCK BRIDGE SAW

Breton

Advantages: • Produces smooth, accurate cuts –including straight, curved and complex shapes • Digital templates can be used or from prepared shapes. • Maximizes material utilization, minimizes project cycle time and ensures proper fit and finish at installation. • Significantly reduces cycle time of Secondary operations (eliminates the Need for time consuming finger bit Operations on CNC Routers or Manual Routers.)

➜

a ll t he ne w s o n w w w.breto n.it

B re t o n C O M B I C U T

COMBICUT 5 axis - It works perfectly with ceramic slabs, 45° waterjet cut is now available

COMBICUT

Breton

â&#x17E;&#x153;

B re t o n F U E G O M U L T I A X I S

FUEGO Multiaxis New Breton machine for cutting blocks and billets using a diamond wire, ideal for producing cylindrical/tapered columns, casings for columns, shaped and rough-hewed components for interior decoration through the interpolation of up to 8 axes.

a ll t he ne w s o n w w w.breto n.it

F U E G O M U LT I A X I S

Breton

â&#x17E;&#x153;

B re t o n M I R A G E 6

MIRAGE 6, the FORMULA 1 racing head

a ll t he ne w s o n w w w.breto n.it

MIRAGE 6

Breton

Outstanding capacity of levelling the granite slab surface undulations thanks to the following combined effects: high rotation speed of tools (30 m/sec) low rotation speed of the head (250 rpm) large mass and high rigidity of the head head diameter of 510 mm UNEQUALLED FOR GRINDING AND LEVELLING GRANITE SLABS

➜

e d g e p o l i sh er C O M E T

➜

e d g e p o l i sh er M O D U L O 3

➜

e d g e p o l i sh er S U P E R M O D U L O

➜

B e l l an i fo r Breto n

The best team for edge polishers Manufactured by Bellani, customized by Breton, and with the technical After Sales Service provided by Breton

➜

ed g e p o l i s h er L I N E A

➜

ed g e p o l i s h er M I C R O N

a ll t he ne w s o n w w w.breto n.it

THE BEST TEAM FOR EDGE POLISHERS

Breton

Breton â&#x17E;&#x153;

Bre t o n S H I N E M A S T E R â&#x20AC;&#x201C; R E F L E X M E T E R ( P A T E N T E D )

SHINE MASTER - An absolute first Breton previews an invention with great practical impact: a device for

is processed by the software and shown on the display thus representing

measuring automatically the surface gloss degree while the slab is moving.

a qualitative control of the outgoing slabs. An alarm warns the operator

It has been designed for natural and composite stone slabs.

when the B-reflex detected do not fall within the preset range and the

SHINE MASTER measures the slab surface gloss through a reflection system.

display shows through colours with different intensities the spots of the

The gloss order of magnitude detected by the device (quantity of B-reflex)

surface where the gloss does not conform to the preset standard.

Ubiquity, the revolutionary ASEM technology for remote assistance The Italian automation company ASEM and Breton together to innovate and compete With Ubiquity, the software platform for remote assistance, ASEM won the “Windows Embedded Intelligent Systems Partner Excellence Award” in the Global Manufacturing category, award that Microsoft gives every year to their most

Ethernet devices without installing any development tool on remote terminals. Ubiquity’s Virtual Private Network operates at the data-link layer of the ISO / OSI model and supports UDP type broadcast messages to avoid both the introduction of complex routing rules and the need to reconfigure the gateway of remote devices. Breton could also save over 400 thousand euros of their yearly travel expenses only in the first year after Ubiquity’s adoption, important detail emphasized by Breton’s management. ASEM, automation Italian speaking

innovative partners. It is another important step forward in the spreading of Ubiquity as a standard “de facto” for remote access and remote maintenance of industrial machinery. In the large series of Ubiquity applications all over the world, it stands out the all Italian cooperation of Asem and Breton, one of the leading global players in the field of machining centers and CNC machinery for marble and stone processing. Breton uses Ubiquity software solution (for Win CE and Win 32/64 operating systems) on both ASEM and third party systems reaching savings on total service cost higher than 30%, adding extreme flexibility to the daily support activity. The solution adopted by Breton provides remote access to machinery via an optimized and secured VPN and allows to program from remote all serial and

Focusing on innovation and investment in R&D, ASEM is an Italian company always leading in the market. Today the company is a leader in the design, manufacturing and sales of Industrial PCs and embedded systems targeting HMI (Human Machine Interface), control and remote assistance systems in the Industrial Automation market. Founded in 1979 by Renzo Guerra, the current President and Chief Executive Officer, ASEM crossed through the entire evolution of Information Communication Technology, anticipating changes in the market and gaining a fundamental know-how in the development of systems based on standard technologies and embedded electronic platforms. A pioneer in integration between Information Technology and Industrial Automation, ASEM has contributed to increasing the level of innovation and productivity in the field of automatic machines and manufacturing systems through “Open & Standard” technologies. The Friulian company is now a major player in the European automation arena and is characterized by its ability to design hardware, firmware, software, mechanical and systems engineering. At the same time the company can manage independently all phases of the production process.

MULTICUT INTEGREX automatische schneidstrasse für stein Mit Breton Multicut Integrex erreicht man eine Produktionssteigerung von 20%, dank der „Längsstellung” des Spindelträgers und eines schnellen Abnehmers mit Saugköpfen, der die Streifen entnimmt und wieder auflegt, Schnittoptimierung ist also sicher.

Breton Multicut Integrex is the latest generation, patented cutting line that offers a 20% higher productivity thanks to the ”longitudinal” configuration of the spindle holding beam and the rapid vacuum cup system which lifts and repositions the longitudinal strips, thus making the cut optimization easier and faster.

Slab optimization

Entry slab

Cutting

Bench rotation

Picking and moving pieces

Cutting

â&#x17E;&#x153;

a ll t he ne w s o n w w w.breto n.it

B re t o n M U L T I C U T I N T E G R E X

MULTICUT INTEGREX - automatic multi-blade saw with automatic nesting and suction system for moving pieces

M U LT I C U T I N T E G R E X

Breton

Bench rotation

Picking and moving pieces

Cutting

Bench rotation

Cutting

Out pieces

12 23

BRETON GLOBAL Breton globalBRETON network GLOBAL More th t More th t

51.000 sqm sqm 51.000sqm sqm

of of covered covered production production areas areas of of covered covered production production areas areas

2 2

production production Headquarters Headquarters production production Headquarters Headquarters

700 700

More than emplo More emplo Bretonthan Italy and participate

L Breton NETWORK L NETWORK than han 3.600 units installed 182 182 countries countries than han 3.600 unitsinininstalled B re t o n O N T H E W O R L D

in in 182 182 countries countries

5 5

BRETON ON THE WORLD

â&#x17E;&#x153;

a ll t he ne w s o n w w w.breto n.it

ranges ranges of of product product ranges ranges of of product product

27 27

authorized authorized workshops workshops authorized authorized workshops workshops

oyees in oyees in ed companies

Breton â&#x17E;&#x153;

Bre t o n B R E T O N S T O N E

Breton, developing the engineered stone sector BRETONSTONE QUARTZ - Calacatta: inspired by nature, engineered by Breton Technology, no limits to your imagination

Breton â&#x17E;&#x153;

a ll t he ne w s o n w w w.breto n.it

B re t o n B R E T O N T E R A S T O N E

Breton, developing the engineered stone sector BRETONTERASTONE: the cement-based product which brings out the best from the aesthetic taste of modern architecture

Breton â&#x17E;&#x153;

Bre t o n B R E T O N M A C H I N E R Y U K L T D

Made in Breton, sale and service by Breton UK UK and Ireland have always been very interesting markets for Breton SpA considering that we installed almost 200 machines in those countries. In collaboration with Carl Sharkey, Simon Bradbury and Clare Harris, four years ago we decided to establish Breton UK, a

winning synergy capable of meeting any possible technical or commercial requirement of our customers. Breton UK, Breton Spa sole agent, today includes ten persons which are daily involved in the technical assistance, spare part delivery and sale of new Breton equipment.

Breton Machinery UK Ltd Unit 1 Southgate Court - Old Bridge Road - Hornsea - East Riding of Yorkshire - HU18 1RP Tel: +44 (0) 8455 440587 - Fax: +44 (0) 08704 789996 - Mobile: 07912 849749 - Skype: carlsharkey - www.bretonuk.com

Breton ➜

a ll t he ne w s o n w w w.breto n.it

B re t o n I N D I A

Breton India Services Breton India Services a well-established enterprise offering a comprehensive service to the Indian customers of Breton Italy Breton India Services is a more and more well-established and renowned enterprise that ranks Breton as the first company in the sector provided with a trustworthy and solid organization in India to offer on-site technical assistance and supply of spare parts for either dressing, resin-treating and polishing lines or multi-wire machines. Breton India Services deals also with commercial activities with the Indian customers. The team of Breton India Services consists of 28 persons (technicians and sales officers) and is headed by Mr. Naresh Gupta (MD) residing in the Bangalore head-quarters. Breton’s officer in charge with the Indian market is Mr. Pietro Zamperin. Breton India Services is presently expanding its warehouse under the system of “private bonding warehouse” in order to increase the stock of both spare parts for all machines and rubber profiles for multi-wire machines.

Breton India Services provides the re-plastification of the diamond wires produced by Boart & Wire (Italy) Breton India Services set up a shop in the outskirts of Bangalore, which is equipped with sophisticated machines and equipment and highly qualified personnel in order to perform the re-plastification of the diamond wires supplied by Boart&Wire (Italy), the most important producer of diamond wires for sawing natural stone blocks in the world. Boart & Wire (Italy) is a Breton’s subsidiary company.

BRETON INDIA SERVICES No.451 17th G Main road. VI block - 560095 Koramangala, Bangalore, India Tel. (91).80.25533644 - Fax. (91).80.25533788

Breton India after sales team

Breton â&#x17E;&#x153;

Bre t o n N E W L O C A L O F F I C E

Welcome in Australia Breton opened a new local office in Melbourne (Australia) in July 2014 so as to supply an efficient after sale and spare part supply service to its valued Australian customers. The facility is fitted out with offices and a broad, wellprovided spare part warehouse. Two Breton skilled technicians (Australia naturalized citizens) are presently working in this facility.

Breton is therefore the first company in the field that got itself organized in Australia in a professional and stable way in order to provide technical assistance and supply of spare parts on site for its complete range of machines. The person in charge for the Australian and New Zealand market in Breton is Mr. Samuele Tosi

BRETON AUSTRALIA 20 Brock Street, Melbourne 3074 Victoria - www.bretonaustralia.com.au - Mail: info@bretonaustralia.com.au

Breton ➜

a ll t he ne w s o n w w w.breto n.it

B re t o n D O B R A S I L A N O V A L O J A

Bem-vindo em Cachoeiro da Itapemirin Em janeiro 2014 foi inaugurada a nova loja da Breton em Cachoeiro da Itapemirim no Estado de Espirito Santo. A loja fornece aos Clientes Brasileiros um eficiente serviço técnico de pós-venda, tem um grande estoque de peças de reposição e também perfis de poliuretano para maquinas multifios. Na loja trabalham onze funcionários brasileiros e cada um tem

a sua especialização: 7 funcionários são técnicos e cuidam das muitas maquinas Breton entaladas no Brasil. A Breton é a primeira empresa do setor organizada numa loja permanente no Brasil com funcionários, almoxarifado de peças de reposição já importados para linhas de polimento, resinagem e maquinas multifios.

BRETON BRASILE Arisrides Campos, 494 - Campo da Leopoldina - Cachoeiro de Itapemirim - ES - Brasil - Tel. +552835185602

➜

a ll t he ne w s o n w w w.breto n.it

B re t o n G M B H D I E G R U P P E

Breton GMBH, eine konsolidierte Tatsache im Dienst der deutschsprachigen Kunden Breton GMBH wurde gegründet, um allen deutschen und österreichischen Kunden , ob klein oder groß, einen pünktlichen und effizienten Verkaufs- und Aftersales-Sevice durch deutsche Mitarbeiter mit großer Erfahrung zu liefern. Breton GMBH wurde im Jahr 2009 gegründet, ist nach und nach gewachsen, ist heute konsolidiert und wird von den Kunden sehr geschätzt. Das gesamte Verkaufs- und Technikerteam der Breton GMBH zählt heute 7 Mitarbeiter und wird von Herrn Klaus Backmund (Geschäftsführer & Partner) vom Sitz in Neckartenzlingen (bei Stuttgart) aus geleitet.

BRETON GMBH DIE GRUPPE

Breton

Der in Breton S.p.A. (Italien) zuständige Mitarbeiter für den deutschen und österreichischen Markt ist Herr Michele Padovan. Die technische Struktur der Breton GMBH ist der Anhaltspunkt der deutschsprachigen Kunden für sämtliche Fragen hinsichtlich technischen Service, Ersatzteile, um erforderliche Teile schnell zu identifizieren und die Versand- und Lieferzeiten zu überwachen. Das technische Team ist auch für die Einschulung in deutscher Sprache der Kundenmitarbeiter zuständig, damit unsere Maschinen auf optimale Weise eingesetzt werden. Die Verkaufsstruktur der Breton GMBH deckt das gesamte deutschsprachige Gebiet ab und ist qualifiziert, um kundenspezifischen Wünschen nachzukommen.

BRETON GmbH Schulstr. 30 - 72654 Neckartenzlingen - Deutschland - Tel.: +49-7127-948498 - Mail.: office@breton-deutschland.de

Unifying the Sales and Service Experience is what makesExperience us Unifying the Sales and Service is what makes us Breton USA Breton USA

Over 700 machine installations performed More than 300 clients in North America Over machine installations performed 4 Service locations ( ); Sarasota (Florida); Detroit (Michigan); w w w. b re tonus a.com More than clients in North America Toronto (Ontario); Montreal (Quebec)

700 300

2 Home bases: Sarasota (Florida) & Detroit (Michigan)

4 Service locations ( ); Sarasota (Florida); Detroit (Michigan);

www.bretonusa.com

Toronto (Ontario); Montreal (Quebec)

2 Home bases: Sarasota (Florida) & Detroit (Michigan)

➜

a ll t he ne w s o n w w w.breto n.it

B re t o n U S A

In America for over 30 years Unifying the sales and service experience is what makes us Breton USA Founded on Service Breton USA began our mission of servicing Breton machinery in 2004 and today we hold the exclusive contract to service Breton SpA equipment throughout North America, including the United States, Canada, Mexico and the Caribbean. Growing steadily since our first facilities opened in Sarasota, Florida, we’ve expanded to add a full warehouse and service team in Detroit, Michigan and two service points in Canada. Our technicians have been meeting the needs of a robust client base for years, keeping their Breton machines running smoothly and reinforcing the Breton brand’s reputation for performance and dependability. Expanding to marketing and sales Beginning in July of 2011, Breton USA expanded our scope to include

sales and distribution of the full catalog of Breton SpA products for all of the United States and Canada. With a product line of machines for the Stone Working, and Engineered Stone Plant industries, each and every machine that Breton USA sells upholds a high standard of quality, performance, and safety. With agents around the country, our sales team is dedicated to expanding our footprint in North America and to keeping our existing clientele informed on the latest technological advances that put them on the cutting edge in their industries. They are continually identifying new opportunities for growth and new customers with a real need for Breton’s product line.

IN AMERICA FOR OVER 30 YEARS

Breton

The Breton USA team is composed by 18 persons between technicians and salesmen, managed from the headquarter in Sarasota, Florida by Mr. Gianrico Filippetto (Vice President). The person in charge for the North American market in Breton Italy is Mr. Pietro Zamperin.

Breton USA Customer Service Corp 1753 Northgate Boulevard - Sarasota, Florida 34234 - Phone: (941) 360-2700 - Fax: (941) 360-2600 - Email: info@bretonusa.com

Breton S.p.A. Via Garibaldi, 27 - 31030 Castello di Godego (Treviso) Italy tel. +39 0423 7691 - fax +39 0423 769600 - e-mail: info@breton.it - www.breton.it