CrewBoss 2015 by brodtsbrooks

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

WILDLAND 1

Innovation is at the core of who we are. At CrewBoss, we work to build something better,

something that destroys standards and outfits you in the head to toe protection you depend on. With a new uniform ensemble that revolutionizes station life to a range of NFPA certed brush pants from single to Tri-Cert, the CrewBoss line of garments and gear gives you the right tools to get the job done. Our tested tough equipment additions prove that innovation is at the core of who we are and what we do. Whether you are working to protect your community or fighting a raging wildland fire, get the gear that gets it done. 2

tableof

Contents Fabrics

Wildland

Interface

Station Wear

Gear

Rehab

SnapTank

Trim Options

Sizing | Garment Care

Ordering

CrewBoss is an ISO 9001 company producing made in America products. We are proud to offer Berry Compliant PPE.

Cover photo by Stuart Palley CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

TABLE OF CONTENTS 3

7oz Advance™ Spruce

7oz Advance™ Khaki

6.8oz Nomex® Twill Navy

6oz Nomex® Spruce

7oz Advance™ Yellow

7oz Tecasafe® Plus Spruce

7oz Tecasafe® Plus Navy

7oz Tecasafe® Plus Yellow

7oz Tecasafe® Plus Red

ADVANCE™ Advance™ offers proven performance in a protective fabric. Its special rip-stop construction, engineered from a blend of Dupont™ Kevlar® and Nomex® brand fibers, provides high strength, durability and thermal protection. Clothing made from tough Advance™ fabric is geared for the thermal hazards, long hours and rugged terrain of wildland fire fighting. The built-in protection of fiber blend and ripstop weave provides strength and flexibility even after extreme thermal exposure.

FABRICS 5

7oz Advance™ Navy

NOMEX® IIIA Superior thermal protection is assured with apparel and accessories manufactured with Nomex®. Garments made of Nomex® are inherently flame-resistant and won’t melt, drip or support combustion in the air. And, the thermal protection offered by Nomex® is permanent — its superior flame resistance cannot be washed out or worn away. A key factor in the thermal protection Nomex® provides is that it carbonizes and thickens when exposed to the intense heat of today’s fires. This increases the protective barrier between the heat source and the skin and minimizes burn injury. This tough, protective barrier stays supple and flexible until it cools, which gives you valuable extra seconds of protection when you need it most.

6oz Nomex® Yellow

TECASAFE® PLUS

7oz Tecasafe® Plus Hi-Viz

With superior flash fire protection, TenCate Tecasafe® Plus offers Coolderm™ Technology, an enhanced comfort experience. The scientists at TenCate Protective Fabrics USA developed an exceptional blend of fibers that provide Active Moisture Management. This moves moisture away from the wearer while generating an evaporative cooling effect in warmer environments - or regulating temperature in cooler climates. Tecasafe® Plus with Coolderm™ Technology is a hypoallergenic textile that’s extremely comfortable and easy to wear. The fabric arrives soft with ergonomic performance so there’s no break-in period, easy donning and doffing, and no chaffing or irritation during extended wear. Inherently flame-resistant (FR) so the protection comes “built in” and will never wash or wear out, Tecasafe® Plus with Coolderm™ Technology is engineered as a more durable and comfortable option to chemically treated wildland fabrics. With more than 15 million yards sold worldwide, TenCate Tecasafe® Plus with Coolderm™ Technology provides the protection, light weight and easy comfort that makes it ideal for even the harshest environments.

PBI TRIGUARD™ Inherently flame resistant, soft, lightweight and comfortable, PBI Triguard provides superior protection. PBI TriGuard™ fabric is a 3-fiber blend of PBI, 3Lenzing® FR and MicroTwaron™ that offers superior flame protection, outstanding comfort and unmatched durability. This advanced rip-stop blend fabric meets the demands of most any environment. PBI TriGuard™ fabric is easy to care for and maintain, making it the right choice for the work you do.

5.3 oz Triguard™ Yellow CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

FABRICS 5

Out there on the line a single FR garment can be the difference. That’s a responsibility that we take seriously. Wildland firefighting is not one size fits all and your brush pants shouldn’t be either. Classic or Elite, we can outfit you in the fabric, color, and NFPA certification you need to do your job well. Our team will work with you to provide insight into the available options and their inherent benefits. Working with us to build the pant you need means that when you are out there facing a fire, you never have to question if your protective apparel will be the difference.

“ 6

I have not worn a pant so comfortable in my life. Totally breathable and flexible. Just a great pant.

Photo by Stuart Palley

Self-locking brass zippered fly with snap closure Internal smartphone pocket Oversized, extra deep front slash pockets Stress points bar tacked at 38 locations Exclusive crotch reinforcement panel Internal BDU divider pocket Reinforced, articulated knees Side elastic for ultimate freedom and comfort

Rear pockets Pleated cargo pockets with drain holes

Extra roomy leg and seat cut Hook and loop ankle straps covered with self-fabric for heat resistance

Elite Brush Pant | Certified to NFPA 1977 The new CrewBoss Elite Pant was designed to combine a more ergonomic fit with increased function. With a more tailored fit than our Classic Brush Pant, the Elite Pant incorporates features like reinforced articulated knees for a great range of motion and elastic side waist panels for freedom and comfort. The pocket design incorporates deep slash pockets with an overlaying cap to provide room for everything you need. 7.0 oz. Tecasafe Plus | Spruce | SRP0120 6.0 oz. Nomex | Spruce | SRP0108 6.8 oz. Nomex | Spruce | SRP0114 7.0 oz. Advance | Khaki | SRP0125 7.0 oz. Advance | Spruce | SRP0128 Please see page 54 for sizing information SRP0120 SRP0108 SRP0114 SRP0125 SRP0128

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

WILDLAND 7

â&#x20AC;&#x153;

I wear the CrewBoss Advance Kevlar pants every day, putting them through extreme uses including arduous climbing, hiking, saw operations and ignition operations. For these reasons, I choose to wear CrewBoss over many other brands.

Photo courtesy of MRCA

Self-locking brass zippered fly with snap closure Oversized front slash pockets Stress points bar tacked at 38 locations Crotch reinforcement panel Unidirectional cargo pockets

Elastic back band

Rear pockets

Unidirectional cargo pockets

Extra roomy leg and seat cut Hook and loop ankle straps covered with self-fabric for heat resistance

WLP0120 WLP0117 WLP0108 WLP0105 WLP0114 WLP0125 WLP0128 WLP0126

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

WILDLAND 9

“

All of the PPE I wear is from CrewBoss. I’ve had the pants and shirts for years and they’ve never let me down.

Hickory Brush Shirt Certified to NFPA 1977 The Hickory Shirt has a long tradition of being an essential piece of apparel for Loggers, Foresters, Arborists and others who spend a great amount of time working in the outdoors. This design was built to wear through the toughest work days by the most rugged workers in North America. While protecting the user from snags, debris and abrasion, the CrewBoss Hickory Brush Shirt has been constructed with protection, durability, comfort and safety in mind. 5.8 oz. Tecasafe Plus | Yellow | WLS0335 6.0 oz. Nomex IIIA | Yellow | WLS0305

WLS0335 WLS0305

Photo courtesy of MRCA

CrewBoss Brush Shirt Certified to NFPA 1977 This innovative new style Brush Shirt includes all of the functionality of the classic style with an improved stand up collar for complete neck coverage. Ideal for wildland firefighters, the Brush Shirt offers the comfort you need with the toughness you have come to depend on. Made from flame resistant Nomex IIIA or Tecasafe Plus, the Brush Shirt offers superior durability, abrasion resistance and exceeds the NFPA 1977 standards. Additional features such as hook and loop cuff closures, extra long, square cut tails and a unique stand up collar with throat strap insures sustained protection for the length of any operation. Two large chest pockets with hook and loop closures create added functionality on the fire line. 5.8 oz. Tecasafe Plus | Yellow | WLS0135 WLS0135 WLS0105 6.0 oz. Nomex IIIA | Yellow | WLS0105

Traditional Brush Shirt | Certified to NFPA 1977 Based off the original Forest Service style brush shirt, the Traditional Brush Shirt is designed for optimal functionality on the most high pressure fire lines. The Traditional Brush Shirt includes features such as; large spade-style pockets with hook and loop closures, as well as hook and loop closures around the cuff to insure a tight fit around the glove. Available in either Nomex IIIA or Tecasafe Plus, the Traditional Brush Shirt provides superior personal protection with dependable strength that is lightweight, breathable and inherently flame resistant. 5.8 oz. Tecasafe Plus | Yellow | WLS0235 6.0 oz. Nomex IIIA | Yellow | WLS0205 WLS0235 WLS0205

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

WILDLAND 11

Brush Coat | Certified to NFPA 1977 The CrewBoss Brush Coat remains the traditional wildland firefighter’s first choice. The optional button-in thermal liner adds extra warmth when spiked out or during any night operation. The raglan–cut sleeve, snap front closure and turnout-style collar encompass the classic elements of personal protective coats that have worked for firefighters across the country. 7.0 oz. Tecasafe Plus | Yellow | WLC0117 6.0 oz. Nomex IIIA | Yellow | WLC0105 7.5 oz. Nomex IIIA | Yellow | WLC0110 WLC0117 WLC0105 WLC0110 7.0 oz. Tecasafe Plus Liner | Red | WLL0118

Jump Jacket | Certified to NFPA 1977 The Jump Jacket builds on the functionality of the brush coat, with features such as a fully committed liner and lined hand warmer pockets to insure comfort and protection during cold weather or night operations. The 6” stand up collar with throat strap closure and zippered front closure with hook and loop security tabs add extra thermal protection. With an outer shell constructed from Nomex IIIA and Nomex thread used throughout the jacket, the Jump Jacket is sure to withstand the harshest conditions. 7.5 oz. Nomex IIIA | Yellow | WLJ0110 WLJ0110

Photo courtesy of MRCA

Face Protectors Full Tecasafe Plus, ear, neck and face protector. Compatible with both Morning Pride and Bullard style helmets. Constructed from yellow 7.0 oz. Tecasafe for optimal comfort and protection. Pressure-sensitive hook and loop tabs allow easy installation in any wildland helmet. Nomex thread used throughout. Initial Attack Face Protector | 7.0 oz. Tecasafe Plus | Yellow | WLF0217 Full Face Protector | 7.0 oz. Tecasafe Plus | Yellow | WLF0517 9â&#x20AC;? Face Protector | 7.0 oz. Tecasafe Plus | Yellow | WLF0317 Nomex options available.

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

WILDLAND 13

â&#x20AC;&#x153;

Working in unforgiving SoCal brush fuel type fires, CrewBoss products hold up the best.

Standard Jumpsuit | Certified to NFPA 1977 The CrewBoss Standard Jumpsuit provides comfort and protection from head to toe. The array of functional features, will make life on the fire line a bit easier. Features include: radio pocket and spade pocket with full flap closures. Two rear spade pockets with full flap closures and extra large slash pockets with pass-through feature are standard. Closures at the wrists and the boots insure a tight fit, while elastic back band adjusts to fit you perfectly. Zippered leg openings make doffing and donning fast and easy. 7.0 oz. Tecasafe Plus | Yellow | WLU0117 6.0 oz. Nomex IIIA | Yellow | WLU0105 WLU0117

WLU0105

Premium Jumpsuit | Certified to NFPA 1977 Building on the construction and design of the CrewBoss Standard Jumpsuit, the Premium Jumpsuit includes features to increase functionality and protection. Unidirectional cargo pockets at the thighs build on the range of large utility pockets featured on our jumpsuits. The addition of 2â&#x20AC;? Scotchlite reflective triple trim at the ankles, forearms and across the back helps to increase visibility of the Premium Jumpsuit. 7.0 oz. Tecasafe Plus | Yellow | WLU0217 6.0 oz. Nomex IIIA | Yellow | WLU0205 WLU0217 WLU0205

Photo by Stuart Palley

Radio pocket on left breast, spade pocket on right with full flap closures

Hook and loop closures at wrists Extra large slash pockets with pass through feature Stress points bar tacked Unidirectional cargo pockets at thighs prevent snagging (Premium)

Zippered leg openings

2” Scotchlite reflective lime yellow triple trim at ankles, forearms and across back (Premium) Nomex® thread throughout

2” Elastic back band with 4” side take-ups

Rear spade pockets

Double back D-ring, hook and loop closure at boots CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

WILDLAND 15

â&#x20AC;&#x153;

Counting down the days until we get our new custom interface coats!

Photo courtesy of Snohomish County Task Force

Alpine style collar

Radio pocket with mic tab Pen/pencil pocket

Glove hanger tab

Large interior storage pocket

Unidirectional front cargo Full zippered front closure pockets with concealed with #10 brass zipper hand warmers mounted on Nomex速 tape Caped shoulder design with built-in ease for full freedom Sewn with Nomex速 of arm movement thread throughout

3M triple trim around bottom, across back and around forearms Gusset cuff with hook and loop closure

Interface Coat | Certified to NFPA 1977 The CrewBoss Interface Coat is ideal for the urban firefighter. Its unique cut provides superior thermal protection while allowing for an enhanced range of motion. With its full-cut design and caped shoulders, the Interface Coat provides the firefighter with a comfortable fit. Functionality is key on the fire line and the CrewBoss Interface Coat really delivers. With unidirectional front cargo pockets that conceal hand warmers, a large interior storage pocket and a radio pocket with a microphone tab, the Interface Coat makes life on the fire line simple with plenty of storage for extra gear. 7.0 oz. Tecasafe Plus | Yellow | IFC0117 6.0 oz. Nomex IIIA | Yellow | IFC0105 7.5 oz. Nomex IIIA Twill | Yellow | IFC0110 7.0 oz. Advance | Yellow | IFC0127 Optional Button-in Liner 7.0 oz. Tecasafe Plus Liner | Red | IFL0118 7.0 oz. Tecasafe Plus Liner | Blue | IFL0119 IFC0117 IFC0105 IFC0110 IFC0127

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

INTERFACE 17

“ 18

I’ve been using your pants for a very long time and love every part of them. I wouldn’t use anything else.

Photo courtesy of MRCA

#5 Nomex® zippered fly with nickel snap closure #5 Nomex® zippered side pass through pockets Stress points bar tacked

Unidirectional cargo pockets at thighs prevent snagging Double-layered fabric knees 2” elastic back band with seven large belt loops

#10 Nomex® zippered leg openings Extra roomy leg and seat cut Rear pocket

Sewn with Nomex® thread throughout Reflective triple trim around calves Double back D-ring, hook and loop cuff closures for tight fit at the boot

Interface Pant | Certified to NFPA 1977 The ideal wildland over-pant, its full cut design allows fast donning for immediate response. Loaded with features that make them comfortable and effective, CrewBoss Interface Pants are ideal for urban firefighters. 7.0 oz. Tecasafe Plus | Yellow | IFP0117 6.0 oz. Nomex IIIA | Yellow | IFP0105 7.5 oz. Nomex IIIA Twill | Yellow | IFP0110 7.0 oz. Advance | Yellow | IFP0127 IFP0117 IFP0105 IFP0110 IFP0127

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

INTERFACE 19

Photo by Stuart Palley

CAL Fire Spec | Certified to NFPA 1977 The Cal Fire Spec was created to produce better THL performance while enhancing the over all TPP. The new spec utilizes several performance fabrics in a single layer design to increase protection and breathability, while maintaining a RPP (radiant protective performance) of 10. Certified to NFPA 1977, this light weight garment is a unique interface design approved by Cal Fire. Coat | Combination of. Nomex fabrics | Yellow | CFC0122 Pant | Combination of. Nomex fabrics | Yellow | CPF0122 CFC0122 CPF0122

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

INTERFACE 21

APPS WLFF PPE garment system. The next generation of PPE is here! The DHS APPS (Advanced Personal Protection System) process was modified to develop the new WLFF PPE garment system. An Integrated Process Team (IPT) comprised of experienced wildland firefighters from the USFS and state, county, and city fire departments from California were selected to participate in the program. The IPT validated a risk assessment, defined operational requirements, and selected the materials for the PPE garment system. Greater thermal protection, a reduction in heat stress, and improved form fit and function of the PPE garment system was the result of this assessment. The new APPS WLFF PPE not only can reduce heat injury rates, but should also increase the operational effectiveness of the wildland firefighter.

Gen II Response Jacket Certified to NFPA 1977 The Gen II Response Jacket answers the requirements of the DHS, IPT committee and Natick’s request for a single layer wildland fire fighting garment system with greatly improved performance. Exceeds the NFPA’s 1977 minimum requirements for thermal protection and breathability, This garment provides enhanced safety features with superior comfort. Back expansion pleats and double pleated articulated elbows allow for increased mobility. Current NFPA minimum requirements for RPP is 7, the Gen II Response Jacket is rated at 11.5. THL current minimum is 450 W/m2, Response Jacket is rated 752 W/m2. This single-layer APPS WLFF PPE garment will reduce the rate of core body temperature rise and significantly increase work durations when compared to double-layer WLFF PPE configurations. Reducing the rate of core body temperature rise, translates to fewer heat stress injuries. Sigma® | Yellow | WLS0772 Also available in S362/S469 Nomex | Yellow | CFC0222

WLS0772 CFC0222

Photo courtesy of MRCA

Double darted articulated knees for increased mobility Optional Gen II tactical cargo pocket

GEN II Uniform & Tactical Pant | Dual Certified to NFPA 1977 & 1975 Designed to meet and exceed the requirements of DHS, IPT and Natick. Part of the single layer garment system, the Gen II Uniform and Tactical Pant allows you to go from the station to the fireline without changing or adding garments. This pant combines the comfort of a more ergonomic fit and increased function of double darted articulated knees for greater mobility. The smooth-fitting waistband fastens with a snap closure, designed to prevent the hardware from ever coming in contact with the body. A crotch gusset adds to the pantâ&#x20AC;&#x2122;s comfortable fit. Permanent creasing made from fire resistant silicone and back welt pockets maintain a professional uniform look. This pant is available with a variety of options including tactical cargo pockets designed to hold everything you need while maintaining a slim uniform profile. Hook and loop ankle straps covered in self fabric are also available. S469 | Navy | SWP0424 S469 | Black | SWP0421

SWP0424 SWP0421

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

INTERFACE 23

Firefighter’s Apron Get the only firefighter’s BBQ apron with reflective trim and big CrewBoss pockets. Made of 7 oz Tecasafe Plus fabric with triple trim. Perfect for events at the firehouse and home! 7.0 oz. Tecasafe Plus | Yellow | ACQ0117

Ranger Belt The CrewBoss Ranger Belt is inspired by the belts used by Wildland Firefighters and Smoke Jumpers. Single layer Nylon webbing is flexible and comfortable for a full day’s work right into a casual outing. High strength aircraft aluminum V-ring buckle. Velcro tongue to keep belt secure and in place. Ranger Web Belt ACD0247

Fitted Hat Made of 87% Acrylic, 11% Wool, 2% Spandex Blend. Stretch fitted, structured, normal bill CrewBoss low profile logo – raised embroidery letter on front side. Fitted hat | S/M – 6 7/8ths to 7 3/8ths | CBCAPSM Fitted hat | M/XL – 7 3/8ths to 8 | CBCAPMXL

Photo by Stuart Palley

Carlsbad Spec | Certified to NFPA 1977 A twist on our classic interface gear. Full cut coat design allows full freedom of movement while minimizing coat rise and sleeve retraction. The overpant features a hook and loop fly and a crotch seam reinforced with Kevlar tape to prevent seam failure. Bellows pockets on both garments include drain eyelets. Complies with CAL/OSHA standards of wildland firefighting. Coat | 6.0 oz. Nomex IIIA | Yellow | IFC0505 Coat | 7.0 oz. Tecasafe Plus | Yellow | IFC0517 Pant | 6.0 oz. Nomex IIIA | Yellow | IFP0505 IFC0505 IFC0517 Pant | 7.0 oz. Tecasafe Plus | Yellow | IFP0517 IFP0505 IFP0517

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

INTERFACE 25

Introducing

THE professional

UNIFORM

Dual Compliant Uniform Pant Certified to NFPA 1977 & 1975 The CrewBoss Dual Compliant Uniform Pant was designed to withstand pressure from the harshest environments while allowing the user to maintain a professional appearance. The flat panel design incorporates permanent creases to create a professional military style crease. Slash front pockets and welt rear pockets enhance the professional look of the pant. The gusset style crotch reinforcement adds to its durability for long term use. 7.0 oz Tecasafe PlusTwill | Navy | SWP1019 6.0 oz Nomex IIIA Twill | Navy | SWP1004 6.0 oz Nomex IIIA Twill | Midnight Navy | SWP1009 SWP1019 SWP1004 SWP1009 SWP1012 SWP1024 SWP1013 SWP1021 6.8 oz Nomex IIIA Twill | Navy | SWP1012 7.7 oz Nomex IIIA Twill | Midnight Navy | SWP1024 6.8 oz Nomex IIIA Twill | Black | SWP1013 7.7 oz Nomex IIIA Twill | Black | SWP1021 DCU Pant Options Supercrease Permanent Creasing System | PC Cargo Thigh Pocket with Full Flap Closure | TACPKT Leg Strap with D-Ring Closure | LS Leg Snap Closure System | SNP

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

STATION WEAR 27

Tri-Cert Elite Pant

Certified to NFPA 1977 Wildland 2011 NFPA 1975 Station/Work Uniform 2014 NFPA 1951 Technical Rescue 2013 A recent innovation in station wear, the Tri-Cert Elite Pant increases the functionality of the station uniform for the growing number of firefighters operating in a wildland urban interface. Dual certified to exceed the NFPA 1977 and 1975 standards this pant allows the firefighter to go faster from station to a wildland fire. 6.0 oz. Nomex IIIA | Navy | SRP0104 6.8 oz. Nomex IIIA | Navy | SRP0112 6.8 oz. Nomex IIIA | Black | SRP0113 SRP0104 SRP0112 SRP0113

Dual-Compliant Elite Pant 7.0 oz. Tecasafe Plus | Navy | SRP0119

SRP0119

Dual-Compliant Stationwear Pant

Certified to NFPA 1977 & 1975 The first of itâ&#x20AC;&#x2122;s kind, the Dual-Compliant Station Wear Pant is cut in the style of our classic brush pant with the dual NFPA certification needed for the firefighter operating in the wildland urban interface environment. This pant is certified to exceed the standards of NFPA 1975 and 1977. Giving the wearer comfort, convenience, and unparalleled protection for any call. 7.0 oz. Tecasafe Plus | Navy | SWP0119 6.0 oz. Nomex IIIA Twill | Navy | SWP0104 6.8 oz. Nomex IIIA Twill | Navy | SWP0112 6.8 oz. Nomex IIIA Twill | Black | SWP0113

SWP0119 SWP0104 SWP0112 SWP0113

â&#x20AC;&#x153;

Station pants are the best for summer, station and wildland all in one. Photo courtesy of Applegate Fire

Class B Uniform Shirt

Certified to NFPA 1975 Station/Work Uniform 2014 Built with the rugged functionality you expect of CrewBoss brand apparel, the Class B Uniform shirt provides a professional look in a classic uniform style. The 4.5 oz Midnight Navy Twill fabric creates a lightweight, breathable solution that gives firefighters superior comfort, while maintaining the necessary FR protection. Double needle stitching around stress points insures the garment can stand up to harsh duty environments. Spade style pockets with concealed hook and loop closures, false top buttons, and pen inserts increase the functionality of the garment. The secured badge or shield tab adds to the contemporary style of this uniform shirt. Class B Uniform Shirt - Short Sleeves 7.0 oz Tecasafe Plus | Navy | SWS0119 6.0 oz Nomex IIIA | Navy | SWS0104 6.0 oz Nomex IIIA | Midnight Navy | SWS0109 4.5 oz Nomex IIIA | Navy | SWS0102 4.5 oz Nomex IIIA | Midnight Navy | SWS0103 Class B Uniform Shirt - Long Sleeves 7.0 oz Tecasafe Plus | Navy | SWS0219 6.0 oz Nomex IIIA | Navy | SWS0204 6.0 oz Nomex IIIA | Midnight Navy | SWS0209 4.5 oz Nomex IIIA | Navy | SWS0202 4.5 oz Nomex IIIA | Midnight Navy | SWS0203

SWS0119 SWS0104 SWS0109 SWS0102 SWS0103 SWS0219 SWS0204 SWS0209 SWS0202 SWS0203

#5 Brass zipper with metal snap front fly closure Slash pockets

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

Rear welt pockets

STATION WEAR 29

US&R Shirt Search and rescue activities can take place in a wide variety of environments. To be at your best in the face of almost any challenge you need a work shirt that you can depend on. With the CrewBoss US&R shirt, we have built a garment that functions in high-pressure environments with features to help in a search and rescue scenario. This shirt boasts reinforcement of high abrasion areas, extra pockets for storage of necessary tools, and a lightweight, breathable fabric that provides both FR and Flash 2112 protection. 6.0 oz. Nomex IIIA | Navy | SRS0104 4.5 oz. Nomex IIIA | Navy | SRS0102

SRS0104

SRS0102

Active T The CrewBoss Active T represents the next generation in FR undershirts. This unique shirt answers the need for a dual hazard garment that can keep you cool in the summer and dry in the winter. Made from a unique blend of Modacrylic and Tencel, the Active T provides an extra layer of flame protection that wonâ&#x20AC;&#x2122;t melt with an ARC rating of 6.5 and NFPA 70 E Level 1. With its anti-microbial treatment and exceptional wicking qualities, this T will keep you cool and fresh as long as you are on the fire line. Reinforced seams and the use of FR thread insure garment strength and reliability. The Active T boasts a comfortable fit with added length and extended underarm gussets. The Active T offers protection consistent with the recommendations of NFPA for undergarments and has easy care instructions making it a firefighterâ&#x20AC;&#x2122;s favorite. Custom screen printing available. Short sleeve | Modacrylic/Tencel blend | Blue | SWT0375 Long sleeve | Modacrylic/Tencel blend | Blue | SWT0475

Photo courtesy of SC TF-1

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

STATION WEAR 31

Alpine style collar

Radio pocket with mic tab

Blood borne pathogen resistant liner

Pen/pencil pocket

Glove hanger tab

Unidirectional front cargo pockets with concealed hand warmers

Full zippered front closure with #10 brass zipper mounted on Nomex速 tape Hi-Viz style silver reflective trim around base, around chest/back, biceps and forearms

Caped shoulder design with built-in ease for full freedom of arm movement

Gusset cuff with hook and loop closure

Sewn with Nomex速 thread throughout Tattletale indicates liner is attached

Meet ANSI without the vest

Photo courtesy of Mohawk Valley Fire

Rescue Jacket | Built to meet & exceed NFPA 1999, CAL OSHA & ANSI 107

Built to meet the requirements of many first responders, the Rescue Jacket incorporates high visibility features with a blood-borne pathogen resistant liner. The Rescue Jacket is certified to exceed the ANSI 107 standard to insure visibility in all conditions. Liner is removable for care and maintenance. While the Rescue Jacket is built to meet and exceed the requirements for the NFPA 1999 standard, it has not been certified. 7.0 oz. Tecasafe Plus Hi-Viz Top | 6.0 oz. Nomex IIIA Navy Bottom | IFC23C3 Stedair EMS blood borne pathogen liner | IFL038

IFC23C3

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

STATION WEAR 33

Photo courtesy of Mohawk Valley Fire

Fire Rescue Coat | Certified to NFPA 1977 Engineered to meet various performance requirements, preferences, and budgets. The Fire Rescue Coat offers several fabric and color options to best suit any departmentâ&#x20AC;&#x2122;s needs. 7.0 oz. Tecasafe Plus Blue Top | 7.0 oz. Tecasafe Plus Yellow Bottom | IFC02C1 7.0 oz. Tecasafe Plus Spruce Top | 7.0 oz. Tecasafe Plus Yellow Bottom | IFC02C2 6.8 oz. Nomex IIIA Blue Top | 6.0 oz. Nomex IIIA Yellow | IFC02B1 IFC02C1 6.8 oz. Nomex IIIA Spruce Top | 6.0 oz. Nomex IIIA Yellow | IFC02B2 7.0 oz. Advance Blue Top | 6.0 oz. Nomex IIIA Yellow | IFC02A1 7.0 oz. Advance Spruce Top | 6.0 oz. Nomex IIIA Yellow | IFC02A2 7.0 oz. Advance Blue Top | 7.0 oz. Advance Yellow | IFC02A3 Optional button-in Liner | 7.0 oz. Tecasafe Liner | Blue | IFL0119 IFC02C1 *minimum orders apply, call for details

IFC02C2

IFC02B1

IFC02C2

IFC02A3

IFC02B2

Hi-Viz Jacket | Certified to NFPA 1977 & ANSI 107 Meet ANSI 107 without ever needing a vest. The Hi Viz Jacket incorporates Tecasafe Plus Hi Viz fabric with silver reflective trim to insure visibility under all conditions. One jacket works for traffic and crowd control, rescue and recovery, and any kind of work along highways. Optional button-in liner. 7.0 oz. Tecasafe Plus Hi-Viz Top | 6.0 oz. Nomex IIIA Navy Bottom | IFC02C3 7.0 oz. Tecasafe Plus Hi-Viz Top | 6.0 oz. Nomex IIIA Yellow Bottom | IFC02C4 Optional button-in Liner | 7.0 oz. Tecasafe Plus | Blue | IFL0119 IFC02C3 IFC02C4

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

STATION WEAR 35

“ Shoulder harness contains: • PALS webbing • Adjustable sternum strap with ¾” side release buckle

Awesome to be able to break it down when working near the engine!

Engine Pack: • Hydration reservoir compartment • Incidental compartment with internal pen pocket • PALS webbing • 664 cu. in. of room Day Pack: • Main compartment contains: • Drawstring with cord lock top access • Two front pockets for storage • Internal back pocket • Internal side pockets • 1600 cu. in. of room Side pockets contain: • Drawstring with cord lock top access • 8-External fusees pocket with flap • Internal radio pocket sleeve on left and right side • 368 cu. in. of room (each) Fire shelter pocket

M-Pac The landscape of wildland fire is changing and with that the daily job of a wildland firefighter has become even more varied. With this in mind, CrewBoss created the M-Pac. This modular pack is designed to bring all your gear to the fire ground, and give you the ultimate flexibility in what you take with you throughout the day. The top loading, modular M-Pac quickly transforms from an Initial Attack Engine Pack to an Extended Operations Line Pack. Tested in varied landscapes, under harsh conditions, by wildland firefighters, the M-Pac has incorporated design features to make it functional, flexible, and tough on the fire line. • PALS webbing on shoulder straps and front of the pack provide attachment points for additional gear. • Shoulder harness strap design with adjustable sternum strap allows for lower distribution of pack weight on various torso heights. • Back wall design allows wearer to stow shoulder and waist harnesses behind the back padding or use hook and loop ends to gather excess strap. • Zippers and pull tabs in red for quick identification of pockets. • Metal snaps on the zipper pulls secure the modular connection points. M-Pac | ACK05

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

GEAR 37

Blackburn Pack The life of a firefighter is rigorous and demanding. Hiking up hazardous terrain, heading into a fire, and spiking out can be tough on you and your gear. Although the Blackburn Pack has just been released to the market, it is anything but new. It has been rigorously tested by some of the toughest crews we know to insure that it can stand up to any assignment. Our R&D guys not only tested for toughness but they listened to type one testing crews, incorporating many style and design choices that directly benefit the wearer. This pack is engineered to make the demands of the job easier. • PALS webbing on shoulder straps and front of the pack provides attachment points for additional gear. • Jump harness straps are included for aviation operations or as a attachment points for additional gear. • Side compression straps secure internal contents and bring the pack weight closer to the back • Shoulder harness strap design allows for lower distribution of pack weight on various torso heights. • Fire shelter integrated into the pack to prevent swinging, loss, or component failure while compression straps prevent fire shelter from coming into contact with wearer’s back. • Back wall design allows wearer to stow shoulder and waist harnesses behind the back padding or use hook and loop ends to gather excess strap • Zippers and pull tabs in red for quick identification of pockets. Blackburn Pack | ACK04

Photo by SJCollective

Shoulder harness contains: • PALS webbing • Adjustable sternum strap with ¾” side release buckle Main compartment contains: • Zippered front and top access • Two front pockets for storage • Internal back pocket for hydration reservoir • Internal side pockets • Internal zippered front pocket • 1,500 cu. in. of room Side pockets contain: • Drawstring with cord lock top access • 8-External fusees pocket with flap • Internal radio pocket sleeve on left and right side • 368 cu. in. of room (each) Fire shelter pocket CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

GEAR 39

Photo by SJCollective

Zippered incidental compartment with internal divider compartment Webbing keepers

CRUSH Pack The CRUSH Pack is a double radio chest harness designed to incorporate a snug fit for any size radio in a more comfortable and ergonomic fit for the wearer. The tailored fit incorporates both the latest mounting hardware technology from HiTex and a small back panel to create a smaller profile that enhances comfort and durability while providing more even weight distribution. Made from 1000 denier Cordura, the CRUSH Pack has durability with reinforcements along edges and at stress points. Functional features such as Snap-to-Pack attachments, built in webbing keepers, and internal pockets for RPG and incidentals make the pack essential to wildland fire applications. CRUSH Pack | Black | ACR03

Two radio pockets fit sizes from 6-9â&#x20AC;? for Wildland and Municipal incidents

Side release buckles with nylon webbing and elastic shock cord Spare battery pocket

Two pen sleeves D-ring for glove attachment

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

GEAR 41

WATERPROOF RUGGED

Solar Powered Charger 42

ACM05

Powertraveller Powermonkey Extreme The powermonkey extreme houses a massive 9000mAh capacity Lithium Polymer battery and offers users real power in a compact, durable shell. The unit is capable of recharging most 5V devices, including an iPhone up to 6 times, a Garmin Edge 800 up to 6 times and standard mobiles up to 12 times. Waterproof for 30 minutes up to 1 meter and shock resistant, the powermonkey extreme is perfect for wildland firefighter and first responders, as well as military and aid agencies. Featuring an LCD screen which displays battery capacity level and working status (on/off), its unique one touch friction swipe ON/OFF control is designed so the friction switch can only be turned on if swiped from left to right, which helps to reduce the risk of it being accidentally turning on when not in use. The solar panel can be attached to tents or rucksacks via the included Velcro strap and is designed to take the knocks and spills of both the power hungry adventurer and the busy traveler. Powermonkey Extreme | ACM01

Powertraveller Monkeytails Tough, flexible, tangle-free cables allow you to connect your devices via USB. Compatible with iPads, iPhones & smartphones, standard mobiles, GPS, Sat Navs, e-readers, iPods and more, the monkeytails are 15cm in length and are made from high-grade quality materials to insure they are robust. The kit contains: 1 x USB to Mini USB cable â&#x20AC;˘ 1 x USB to Micro USB cable â&#x20AC;˘ 1 x USB to Apple connector cable. Monkeytails | ACM05

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

GEAR 43

The new CrewBoss Fire Rehab Trailer provides everything you need to run a full scale firefighter rehabilitation operation that meets the NFPA 1584 standard. The trailer features a 7.5’ wide x 14’ long trailer that stores and transports everything from both the Vehicle and Cart Kits in one custom-designed support trailer. The interior space is outfitted with built-in features such as: • Air conditioning and heat • Removable 8’ storage bench with seat cushions • 8’ fold down seating • Multi-functional exhaust fan • Ceiling utility hangers (for IV bags, air masks, etc) • Privacy curtains • Completely washable interior surfaces • On board battery runs interior lights in the event of a power loss The trailer exterior includes: • HO scene lighting • Low level perimeter lighting • Turn-out gear hanging system • Auxiliary outlets • Man door • Remote activated 8’ awning with a high wind sensor • Ground tarp CrewBoss Rehab Trailer includes every item in the Rehab Cart Kit plus: • Quick release trailer tie-downs keeps gear secure Box Dimensions: 7.5’ wide x 14’ long x 8’5’ high CBRTRL REHAB TRAILER KIT

On-scene fire rehab is an NFPA and OSHA requirement for your fire fighters. To comply, combine your rehab plan and EMTs with the right sized rehab equipment kit to fit your need and your budget.

The CrewBoss Rehab Vehicle Kit can be transported by pickup, SUV, or on a rig. The entire Vehicle Rehab Kit is stored in heavy duty vinyl bags, with multiple webbing handles for quick access, handling and portability. Just two crew members can set up our rehab system. • 16’ x 16’ CrewBoss shelter (205 sq. ft.) with removable wall panels. Includes: windows, two doors, roof vent and ground cover. Set it up in less than 5-minutes! • Seating for responders and paramedics • Medical supplies organizer with hard writing surface • Crowd control gear • Toilet with separate privacy shelter • White board kit • Portable hand washing station • Cooler • Towels • Storage for your food and water supplies Weights and dimensions: 1 @ 132 lbs and 7.5’ x 20” x 20” 1 @ 114 lbs and 3’x 3’ x 2’ 1 @ 56 lbs and 3’ x 3’ x 2’ Total weight is 302 lbs. CBRVEH REHAB VEHICLE KIT

The CrewBoss Rehab Cart Kit was designed to be stored and transported in one of your existing response trailers, air trucks, heavy rescues or vehicles with a drop gate. All you need is a compact 2’ x 8’ space for the Cart Kit. We have built a heavy-duty multi-tiered kart (2’ wide x 7’ long x 5’ high) on durable caster wheels loaded with features such as a turn-out gear hanging system and large grab handles. We loaded the Cart Kit with the Vehicle Rehab Kit components plus: • Multiple ground tarps to expand the footprint • Misting fan system with water reservoir • Additional seating for responders • Water cooler and cup dispenser • Additional storage for clothing, blankets and supplies • Quick release trailer tie-downs to keep all the gear secure within the cart Weight and dimensions: 720 lbs and 5’ high x 7.5’ long x 2.5’ wide CBRKART REHAB CART KIT

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

REHAB 45

Remote controlled articulated boom scene lighting is just one of the many customized features the team at CrewBoss can provide.

At CrewBoss we have the capability to build a wide range of rehab and specialty trailers. We’ve built rehab trailers with custom breathing oxygen systems that will supply oxygen to the rehabbing personnel with a simple mask and wall mounted line plug in system. We have engineered custom fold down wall seating and dry erase walls on the interior of our rehab units. Rehab trailers are available in two standard footprints: 6’ x 10’ and 7.5’ x 14’.

CUSTOMIZE to meet YOUR department needs

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

REHAB 47

Realize all the advantages of a rigid-framed relay/dump tank with the mobility and compact packaging of an unsupported freestanding tank. No spill over, no rolling. Nothing in the industry offers more structural integrity on flat or uneven ground than the SnapTank. With its quality components and interchangeable parts, the SnapTank can add valuable capacity to any response without the expensive apparatus modifications necessary to transport a traditional rigid tank. Constructed of the finest aircraft quality aluminum components, SnapTank is light, yet durable and can be fully functional in minutes. Five models offer capacities from 1,000 to 3,000 gallons, each plumbed with a standard 3” threaded flange with plug and packaged in a compact field bag.

STORAGE/TRANSPORT DIMENSIONS MODEL

WEIGHT

LENGTH

WIDTH

HEIGHT

ST 1000

74 lbs

39”

16”

14”

ST 1500

90 lbs

49”

16”

14”

ST 2000

101 lbs

56”

16”

14”

ST 2500

110 lbs

63”

16”

14”

ST3000

121 lbs

69”

16”

14”

CAPACITIES AND ASSEMBLED DIMENSIONS

GROUND COVERS

MODEL

Gallons

GC1000

Ground Cover for ST1000

ST 1000

1,000

100”

33”

38”

98”

GC1500

Ground Cover for ST1500

ST 1500

1,500

136”

33”

48”

122”

GC2000

Ground Cover for ST2000

ST 2000

2.000

150”

33”

55”

139”

GC2500

Ground Cover for ST2500

ST 2500

2,500

169”

33”

62”

156”

GC3000

Ground Cover for ST3000

ST3000

3,000

185”

33”

68”

170”

Photo by Mike Macmillan

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

SNAPTANK 49

ID Program At CrewBoss we understand how important it is to be able to identify station and team members responding to an event. That’s why we created an ID Program with a variety of options from screen printing to sewn-on lettering. 3M reflective lettering can be applied to any garment to meet department specifications. These letters are sewn directly to a self-fabric placard that is sewn on to the garment. 2 inch and 3 inch lettering is available. Screen printing of Department Names or Firefighter Names is available in a variety of inks, including reflective. These letters can be printed directly onto the garment or on a self-fabric placard that is sewn on to the garment.

3M™ Scotchlite™ Silver Reflective Trim Silver stripe for visibility in low-light conditions and at night. Meets NFPA 1971, 2000 Edition requirements for flame resistance and convective heat performance. Meets the laundering recommendations described in the new NFPA 1851: Selection, Care, and Maintenance Guide.

3M™ Scotchlite™ Triple Trim Reflective Offers a fluorescent colored component for daytime visibility, and an integrated silver stripe for visibility in low-light conditions and at night. Meets NFPA 1971, 2000 Edition requirements for flame resistance and convective heat performance. Meets the laundering recommendations described in the new NFPA 1851: Selection, Care, and Maintenance Guide.

Reflexite Brilliance Series Fire Trim Edge to edge reflectivity providing the greatest visibility. Highest reflectivity on the market. Smooth outer sealed surface works when wet. Abrasion resistant and easy cleaning. Mono-layered construction makes it the toughest tape in the Fire Service. Available in 3 inch with center strip.

Photo by Stuart Palley

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

TRIM OPTIONS 51

The rigorous requirements of your job demand gear that can withstand a harsh environment, durable enough for the long haul and functional enough to provide the comfort and protection you depend on. We don’t take those requirements lightly, which is why we’ve partnered with professionals who can push the gear to its limits. Meet a few of the professionals who help us ensure that CrewBoss gear is tested tough.

Stuart Palley Stuartpalleyphotography.com

Stuart Palley is a photographer with a huge interest in documenting wildfires amidst California’s drought. He trained with the US Forestry Service to get his basic wildland fire certification. He has photographed for National Geographic Magazine, The New York Times, European Pressphoto Agency, The Orange County Register, Texas Tribune, The Taos News, and various other publications and clients. His Fires at Night photos were recently published in Time Magazine after the May 2014 San Diego fires and in other outlets worldwide.

Jason

@wildlandupdate.com Jason begun his fire service at the age of 14 becoming a fire explorer in the Southern California area. After turning 18, he became a seasonal firefighter with California Department of Forestry. After six years as a seasonal firefighter his love for wildland firefighting was in full swing. He ventured into the US forest service, where he worked in 3 separate regions. Working as a firefighter and becoming a captain, he worked in the US forest service supply cache and has begun his journey now as a casual worker AD as ground support and PIO (T).

Jason A. Ramos jason@productresearchgear.com

A U.S. Smokejumper in his 16th season, Jason Ramos has been fighting fires for nearly 26 years from structural to wildland firefighting. Based out of the North Cascades Smokejumper Base in the rugged Cascades of Washington State, Ramos has fought fires from Alaska to Florida and nearly everywhere between. In addition to his smokejumping career, Jason has been evaluating and testing gear, and designing products. PRg’s evaluation model calls on the experiences and insights of industry professionals, in some of the most rigorous conditions in the world.

“

There’s so much I enjoy about working at CrewBoss. I get to be creative, meet interesting people, and learn new things every day. I’m proud that our products, from the raw goods to the finished piece, are all American made and that the first responders who wear them have the highest quality gear on the market.

David Updike

David Updike is the Deputy Forest Fire Chief for the United States Forest Service at the Plumas National Forest. He began his Fire Service career in wildland firefighting at the Mountains Recreation Conservancy Authority in southern California, where he established and built the agency’s fire division with 40 apparatus and full-time and seasonal employees. After his 19-year career there, serving as the Fire Chief for the last 9 years, Chief Updike decided it was time for new challenges and moved to Quincy, California, to accept a position with the Forest Service. He holds numerous incident qualifications and enjoys the dynamics and hard work experienced during on-scene operations. Chief Updike’s passion for wildland firefighting began in his childhood and is reflected in his accomplishments and his dedication to serving the Fire Service community. In addition to his firefighting career, Chief Updike also holds a position as a lead instructor at the Rio Hondo Community College’s Wildland Fire Academy. He considers teaching and mentoring the next generation of firefighters and leaders his most rewarding work.

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

WILDLAND 53

Sizing

Care Instructions

Sleeves: Measure from center back at neck base along shoulder and down arm to wrist with a slightly bent elbow.

To insure that you get the maximum performance out of your CrewBoss garment, please follow these simple steps for garment care.

Inseam: Measure from base of crotch down inside of leg to desired pant length.

Washing

Classic Brush | Interface Pants: Please choose one option from both waist (step 1) and inseam (step 2) for the appropriate fit. Step 1: Waist

Step 2: Inseam

Regardless of the type of fabric, any CrewBoss protective garment should be machine washed in warm but not hot water. This will help against damage to reflective trim and lettering.

Drying

Small

27” - 30”

Short

28”

Medium

31” - 34”

Regular

30”

Large

35” - 38”

Long

32”

X-Large

39” - 42”

X-Long

34”

XX-Large

43” - 46”

XX-Long

36”

Special Care Instructions

XXX-Large

47” - 50”

XXX-Long

38”

Do not use bleach.

Elite | Gen II | Uniform Pants: Please choose one option from both waist (step 1) and inseam (step 2) for the appropriate fit. Step 1: Waist

Step 2: Inseam

28”

30”

32”

34”

36”

38”

CrewBoss garments will perform at their best when dried in the tumble low setting. Although some fibers are less likely to shrink than others, this helps reduce the risk of potential shrinkage to the garment.

Do not use any fabric softeners. Keep out of prolonged exposure to direct sunlight. Dry cleaning is not recommended as the process may damage reflective trim.

Chest

40” 42” 44”

Waist

46” 48”

Sleeve Shirts | Coats: Please choose one option from both chest (step 1) and sleeve (step 2) for the appropriate fit. Size

Step 1: Chest

Step 2: Sleeve

Small

34” - 36”

32”

Medium

38” - 40”

33”

Large

42”- 44”

34”

X-Large

46” - 48”

35”

XX-Large

50” - 52

36”

XXX-Large

54” - 56

37”

Jumpsuits: Please choose one option from both chest (step 1) and height (step 2) for the appropriate fit. Step 1: Chest

Step 2: Height

Small

34” - 36”

Short

5’4” - 5’7”

Medium

38” - 40”

Regular

5’8” - 6’0”

Large

42”- 44”

Tall

6’1” - 6’4”

X-Large

46” - 48”

XX-Large

50” - 52”

XXX-Large

54” - 56”

Inseam

Conditional Warranty CrewBoss warrants all products against defects in materials or workmanship for a period of one year from date of manufacture. Component manufacturer’s warranty may exceed that of CrewBoss. No warranty is made or implied regarding the intended use of the product. Warranty does not cover damage caused by abuse, misuse, neglect or improper care by the end user in the application of the CrewBoss product. CrewBoss will repair or replace any component deemed to be faulty from manufacture in the most efficient and timely means available to CrewBoss. CrewBoss must authorize all claims prior to any action taken by the end user. For immediate attention regarding any defective product, please phone Customer Support at 1-800-971-7201, 7am-3:30pm, Pacific Time.

CrewBoss gear is available through our trusted dealer network: LineGear

linegear.com Toll Free (800) 466-7574

National Fire Fighter Wildland Corp.

adsinc.com 866-845-3012

Fire Etc.

LN Curtis

Supply Cache

lncurtis.com Toll Free (800) 443-3556 510-839-5111

supplycache.com Toll Free (800) 839-0821 970-530-1893

Forestry Suppliers

Mallory

malloryco.com 360-636-5750

Ten-8

forestry-suppliers.com Toll Free (800) 647-5368

Guy Miyashiro & Company

MES

The Fire Store

ADS

fire-etc.com 619-525-7286

gmc002,com 808-6780287

nationalfirefighter.com 541-485-3566 Toll Free: (800) 423-8347

ten8fire.com Toll Free (800) 228-8368 941-756-7779

mesfire.com 203-364-0620

thefirestore.com Toll Free (800) 852-6088

You can also find product solutions and place orders by contacting our team directly. Ryan Davidson

Scott Mattheisen

Shelley Pykonen

National Sales Manager 541.344.7267 ext. 328 541.743.4142 (direct) rdavidson@crewbossppe.com

CrewBoss Sales 541.344.7267 ext. 334 541.246.8122 (direct) smattheisen@crewbossppe.com

Customer Service 541.344.7267 ext. 305 541.743.4112 (direct) spykonen@crewbossppe.com

CrewBossPPE 800.971.7201 541.344.7267 Need help with sizing? 541.743.4112

ORDERING 55