Jan-10 hubf-xl ds
‘EXTRALIGHT’ FRONT HUBS This replacement front wheel (or hub) has a hollow axle and is secured using an allen bolt. The hub has left and a right side. This is because the axle protrudes by a different amount on each side to accommodate the mudguard stay. It is essential that the wheel is fitted the correct way round. If it is not the wheel may not be properly secured and come loose. The left side of the hub is denoted by a red axle cap. In addition the axle stubs are marked ‘L’ and ‘R’. To fit use the same tab-washers as on the old wheel (note: on some P-types there’s a special RH tab-washer), but discard any plain M8 washers. Insert the allen bolt HDB through the front axle spacer bush ASB & tab-washer, and into the axle from the RH side. Make sure the LH tab-washer and wire-form are in place, and screw into the LH nut, LN, and tighten.
HDB ASB RH Tab washer LH Tab washer
LN
Jan-10 hubf-xl ds
‘EXTRALIGHT’ FRONT HUBS This replacement front wheel (or hub) has a hollow axle and is secured using an allen bolt. The hub has left and a right side. This is because the axle protrudes by a different amount on each side to accommodate the mudguard stay. It is essential that the wheel is fitted the correct way round. If it is not the wheel may not be properly secured and come loose. The left side of the hub is denoted by a red axle cap. In addition the axle stubs are marked ‘L’ and ‘R’. To fit use the same tab-washers as on the old wheel (note: on some P-types there’s a special RH tab-washer), but discard any plain M8 washers. Insert the allen bolt HDB through the front axle spacer bush ASB & tab-washer, and into the axle from the RH side. Make sure the LH tab-washer and wire-form are in place, and screw into the LH nut, LN, and tighten.
HDB ASB RH Tab washer LH Tab washer
LN