Tool holders JIS-B-6339 (MAS BT 403)
© SAB d.o.o.
2021
JIS-B-6339 (MAS BT 403) L1 A
F2 L2
L1 A
MAS BT 403 AD+B DoubleContact
D2 D3 D1
D6
L6
2
E1
E1
L6
MAS BT 403 A/AD
D2 D3 D1
F2 L2
L6
D6
L6
D1
20°
MAS BT 403 A/AD , MAS BT 403 AD+B Cone
D1
D2
D3
D6
D12
L1
L2
L6
A
E1
F2
30
31,75
M12
12,50
46
-
48,40
20
16,30
2
19,5
Min.30
40
44,45
M16
17
63
M4
65,40
25
22,60
2
27
Min.35
50
69,85
M24
25
100
M6
101,80
35
35,50
3
42
Min.48
Cone
D1
D2
D3
D6
D12
L1
L2
L6
A
E1
F2
30
31,75
M12
12,50
46
-
48,40
21
16,30
1
-
Min.22
40
44,45
M16
17
63
M4
65,40
26
22,60
1
27
Min.35
50
69,85
M24
25
100
M6
101,80
36,5
35,40
1,50
42
Min.49
MAS BT 403 AD+B DoubleContact
Material: Case hardened steel with min. 900 N/mm² of tensile strength in core. Execution: Case hardened 58±2 Hrc. Depth of case 0.6 - 0.8 mm. Black oxidised. Accuracy: Taper angle AT3 quality class. Rougness Ra < 0.2
DoubleContact Double Contact tool holders enable simultaneous contact between taper and flange face, and machine spindle. This provides higher radial rigidity resulting in higher run-out precision and better machining accuracy.
3
JIS-B-6339 (MAS BT 403)
Key benefits of THERMO Shrink-fit: Unlike more traditional tool clamping systems, Shrink-fit toolholding employs heating and cooling properties of steel in order to achieve superior clamping force. Inside diameter of the toolholder is precisely manufactured to be slightly smaller than the shank diameter of the cutting tool at the room temperature. Using shrink-fit machine heat is applied to the toolholder allowing it to expand so that the cutting tool can fit in. Upon cooling down toolholder contracts to its original dimension the cutting tool. This clamping system allows for certain benefits not found in more traditional clamping:
•
Superior tool runout - monobloc toolholder, without clamping elements (bolts, nuts, etc.)
•
Higher rigidity - tool shank is gripped 360 deg., through the whole bore length
•
Straightforward operation - fast tool change, less accessories required
•
Increased tool life - better chip load distribution along the cutting edge
•
Easier workpiece approach - thinner profile, reduced nose diameter, various toolholder lengths
•
Enhanced reach - with use of cylindrical shrink fit extensions
•
Internal coolant supply - delivering coolant through the toolholder to the tool edge for better chip removal and superior surface finish. •
Coolant ports sealable using M4 screws.
•
High pressure nozzles for better coolant direction at higher rpm.
•
Extended spindle life - tool holders fine balanced G2.5 at 25 000 rpm or more.
•
Costs saving - higher machine productivity due to stable operation, increased feeds and speeds and cutting depths.
SAB has two decades worth of experience in supplying customers around the world with only top-quality Shrink fit toolholders.
4
JIS-B-6339 (MAS BT 403)
THERMO Shrink-fit chucks x1
Radial runout ≤ 0,003 mm
d2 d1
d3
x2 4.5°
G2.5 at 25 000 min-1
d1 3 3 3 3 4 4 4 4 5 5 5 5 6 8 10 12 14 16 20
d2 9 9 9 9 10 10 10 10 11 11 11 11 21 21 24 24 27 27 33
d3 16 16 16 22 17 17 17 22 18 18 18 22 27 27 30.5 30.5 33.5 33.5 42
x1 65 90 120 160 65 90 120 160 65 90 120 160 65 65 65 65 65 65 80
x2 37 37 41 47 47 50 52
Code SF03.2B30.065 SF03.2B30.090 SF03.2B30.120 SF03.2B30.160 SF04.2B30.065 SF04.2B30.090 SF04.2B30.120 SF04.2B30.160 SF05.2B30.065 SF05.2B30.090 SF05.2B30.120 SF05.2B30.160 SF06.2B30.065 SF08.2B30.065 SF10.2B30.065 SF12.2B30.065 SF14.2B30.065 SF16.2B30.065 SF20.2B30.065
30 Form AD
Double Contact
5
JIS-B-6339 (MAS BT 403)
“3-in-1” THERMO Shrink-fit chucks
Internal coolant supply
x2
x1
4.5° d3 d2 d1
Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1
1 - Open
30 Form AD
Double Contact
d1 6 6 6 8 8 8 10 10 10 12 12 12 14 14 14 16 16 16 18 18 18 20 20 20
d2 21 21 21 21 21 21 24 24 24 24 24 24 27 27 27 27 27 27 33 33 33 33 33 33
d3 27 27 33.8 27 27 33.8 32 32 38 32 32 38 34 34 40.4 34 34 40.4 42 42 47.5 42 42 47.5
x1 90 120 160 90 120 160 90 120 160 90 120 160 90 120 160 90 120 160 90 120 160 90 120 160
x2 37 37 37 37 37 37 41 41 41 47 47 47 47 47 47 50 50 50 50 50 50 52 52 52
2 - Closed
3 - High speed
Code SF06.2B30.090.IK SF06.2B30.120.IK SF06.2B30.160.IK SF08.2B30.090.IK SF08.2B30.120.IK SF08.2B30.160.IK SF10.2B30.090.IK SF10.2B30.120.IK SF10.2B30.160.IK SF12.2B30.090.IK SF12.2B30.120.IK SF12.2B30.160.IK SF14.2B30.090.IK SF14.2B30.120.IK SF14.2B30.160.IK SF16.2B30.090.IK SF16.2B30.120.IK SF16.2B30.160.IK SF18.2B30.090.IK SF18.2B30.120.IK SF18.2B30.160.IK SF20.2B30.090.IK SF20.2B30.120.IK SF20.2B30.160.IK
Including high speed nozzles and sealing plugs
6
JIS-B-6339 (MAS BT 403)
ER Collet chucks x1
d1
Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1
ER 16 16 20 20 25 25 32 32
Range 0.5 - 10 0.5 - 10 1 - 13 1 - 13 1 - 16 1 - 16 2 - 20 2 - 20
x1 70 100 70 100 70 100 70 100
d1 28 28 35 35 42 42 50 50
Code ER16.2B30.070 ER16.2B30.100 ER20.2B30.070 ER20.2B30.100 ER25.2B30.070 ER25.2B30.100 ER32.2B30.070 ER32.3B30.100
30 Form AD
Double Contact
Shell mill holders for cutters with driving slot Internal coolant supply
l1
x1
d2 d1
Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1
d1 16 22 27
x1 35 35 35
l1 17 19 21
d2 38 48 50
Code AD16.2B30.035 AD22.2B30.035 AD27.2B30.035
30 Form AD
Double Contact
7
JIS-B-6339 (MAS BT 403)
THERMO Shrink-fit chucks x1 x2
d3
Radial runout ≤ 0,003 mm
d2 d1
4.5°
G2.5 at 25 000 min-1
30 Form AD
8
d1 3 3 3 4 4 4 5 5 5 6 6 6 8 8 8 10 10 10 12 12 12 16 16 16 20 20
d2 9 9 9 10 10 10 11 11 11 21 21 21 21 21 21 24 24 24 24 24 24 27 27 27 33 33
d3 16 16 16 17 17 17 18 18 18 27 27 27 27 27 27 30.5 32 32 30.5 32 32 33.5 34 34 42 42
x1 65 90 120 65 90 120 65 90 120 65 90 120 65 90 120 65 90 120 65 90 120 65 90 120 80 120
x2 37 37 37 37 37 37 41 41 41 47 47 47 50 50 50 52 52
Code SF03.B30.065 SF03.B30.090 SF03.B30.120 SF04.B30.065 SF04.B30.090 SF04.B30.120 SF05.B30.065 SF05.B30.090 SF05.B30.120 SF06.B30.065 SF06.B30.090 SF06.B30.120 SF08.B30.065 SF08.B30.090 SF08.B30.120 SF10.B30.065 SF10.B30.090 SF10.B30.120 SF12.B30.065 SF12.B30.090 SF12.B30.120 SF16.B30.065 SF16.B30.090 SF16.B30.120 SF20.B30.080 SF20.B30.120
JIS-B-6339 (MAS BT 403)
ER Collet chucks d1 d2 d1
x1
Radial runout ≤ 0,003 mm G6.3 at 25 000 min-1
ER 16 20 25 32
Range 0.5 - 10 1 - 13 1 - 16 2 - 20
x1 50 50 50 60
d1 28 35 42 50
Code ER16.B30.070 ER20.B30.070 ER25.B30.070 ER32.B30.070
30 Form AD
Shell mill holders for cutters with driving slot Internal coolant supply
l1
x1
d2 d1
Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1
d1 16 22 27
x1 35 35 35
l1 17 19 21
d2 38 48 50
Code AD16.2B30.035 AD22.2B30.035 AD27.2B30.035
30 Form AD
9
JIS-B-6339 (MAS BT 403)
THERMO Shrink-fit chucks x1 x2
d3
Radial runout ≤ 0,003 mm
d2 d1
4.5°
G2.5 at 25 000 min-1
40
Form AD+B
Double Contact
d1 3 3 3 4 4 4 5 5 5
d2 9 9 9 10 10 10 11 11 11
d3 16 16 22 17 17 22 18 18 22Í
x1 90 120 160 90 120 160 90 120 160
x2 -
Code SF03.2B44.090 SF03.2B44.120 SF03.2B44.160 SF04.2B44.090 SF04.2B44.120 SF04.2B44.160 SF05.2B44.090 SF05.2B44.120 SF05.2B44.160
“3-in-1” THERMO Shrink-fit chucks Internal coolant supply
x1 x2 4.5° d3 d2 d1
Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1
1 - Open
40
Form AD+B
Double Contact
10
d1 6 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 25 32
d2 21 21 21 21 24 24 24 24 27 27 27 27 33 33 33 33 44 44
d3 27 27 27 27 32 32 32 32 34 34 34 34 42 42 42 42 53 53
x1 90 120 90 120 90 120 90 120 90 120 90 120 90 120 90 120 100 100
x2 37 37 37 37 41 41 47 47 47 47 50 50 50 50 52 52 58 63
2 - Closed
3 - High speed
Code SF06.2B44.090.IK SF06.2B44.120.IK SF08.2B44.090.IK SF08.2B44.120.IK SF10.2B44.090.IK SF10.2B44.120.IK SF12.2B44.090.IK SF12.2B44.120.IK SF14.2B44.090.IK SF14.2B44.120.IK SF16.2B44.090.IK SF16.2B44.120.IK SF18.2B44.090.IK SF18.2B44.120.IK SF20.2B44.090.IK SF20.2B44.120.IK SF25.2B44.100.IK SF32.2B44.100.IK
JIS-B-6339 (MAS BT 403)
Extended “3-in-1” THERMO Shrink-fit chucks Internal coolant supply
x1 x2 4.5°
2°
d3 d2 d1
Radial runout ≤ 0,003 mm
1 - Open
d1 6 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 25 25 32 32
2 - Closed
G2.5 at 25 000 min-1
3 - High speed
d2 21 21 21 21 24 24 24 24 27 27 27 27 33 33 33 33 44 44 44 44
d3 33.3 36.1 33.3 36.1 37.4 40.2 37.4 40.2 39.8 42.6 39.8 42.6 47 49.8 47 49.8 52 52 53 53
x1 160 200 160 200 160 200 160 200 160 200 160 200 160 200 160 200 160 200 160 200
x2 37 37 37 37 41 41 47 47 47 47 50 50 50 50 52 52 58 58 63 63
Code SF06.2B44.160.IK SF06.2B44.200.IK SF08.2B44.160.IK SF08.2B44.200.IK SF10.2B44.160.IK SF10.2B44.200.IK SF12.2B44.160.IK SF12.2B44.200.IK SF14.2B44.160.IK SF14.2B44.200.IK SF16.2B44.160.IK SF16.2B44.200.IK SF18.2B44.160.IK SF18.2B44.200.IK SF20.2B44.160.IK SF20.2B44.200.IK SF25.2B44.160.IK SF25.2B44.200.IK SF32.2B44.160.IK SF32.2B44.200.IK
40
Form AD+B
Double Contact
Including high speed nozzles and sealing plugs Vibration-dampening tapered profile
11
JIS-B-6339 (MAS BT 403)
3º THERMO Shrink-fit chucks Slim execution
x1 x2 3° d3 d2 d1
Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1
40
Form AD+B
Double Contact
12
d1 3 3 3 4 4 4 5 5 5 6 6 6 8 8 8 10 10 10 12 12 12 16 16 16
d2 9 9 9 10 10 10 11 11 11 12 12 12 14 14 14 16 16 16 18 18 18 24 24 24
d3 14.9 18 22.1 15.9 19 23.1 16.9 20 24.1 18 21 25.1 20 23 27.1 22 25 29.1 24 27 31.1 30 33 37.1
x1 90 120 160 90 120 160 90 120 160 90 120 160 90 120 160 90 120 160 90 120 160 90 120 160
x2 37 37 37 37 37 37 41 41 41 47 47 47 47 47 47
Code SF03.2B44.090.3 SF03.2B44.120.3 SF03.2B44.160.3 SF04.2B44.090.3 SF04.2B44.120.3 SF04.2B44.160.3 SF05.2B44.090.3 SF05.2B44.120.3 SF05.2B44.160.3 SF06.2B44.090.3 SF06.2B44.120.3 SF06.2B44.160.3 SF08.2B44.090.3 SF08.2B44.120.3 SF08.2B44.160.3 SF10.2B44.090.3 SF10.2B44.120.3 SF10.2B44.160.3 SF12.2B44.090.3 SF12.2B44.120.3 SF12.2B44.160.3 SF16.2B44.090.3 SF16.2B44.120.3 SF16.2B44.160.3
JIS-B-6339 (MAS BT 403)
ER Collet chucks x1
d1
Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1
ER 16 16 16 16 25 25 25 25 32 32 32 32 40 40 40 40
Range 0.5 - 10 0.5 - 10 0.5 - 10 0.5 - 10 1 - 16 1 - 16 1 - 16 1 - 16 2 - 20 2 - 20 2 - 20 2 - 20 3 - 26 3 - 26 3 - 26 3 - 26
x1 63 100 130 160 60 100 130 160 70 100 130 160 80 100 130 160
d1 28 28 28 28 42 42 42 42 50 50 50 50 63 63 63 63
Code ER16.2B44.063 ER16.2B44.100 ER16.2B44.130 ER16.2B44.160 ER25.2B44.060 ER25.2B44.100 ER25.2B44.130 ER25.2B44.160 ER32.2B44.070 ER32.2B44.100 ER32.2B44.130 ER32.2B44.160 ER40.2B44.080 ER40.2B44.100 ER40.2B44.130 ER40.2B44.160
40
Form AD+B
Double Contact
Shell mill holders for cutters with driving slot Internal coolant supply
x1
Radial runout ≤ 0,003 mm
d2 d1
l1
G2.5 at 25 000 min-1
d1 16 16 22 22 22 27 27 27 32 32 32 40 40
x1 35 100 35 100 160 35 100 160 50 100 160 50 100
l1 17 17 19 19 19 21 21 21 24 24 24 27 27
d2 38 38 48 48 48 50 50 50 78 78 78 89 89
Code AD16.2B44.035 AD16.2B44.100 AD22.2B44.035 AD22.2B44.100 AD22.2B44.160 AD27.2B44.035 AD27.2B44.100 AD27.2B44.160 AD32.2B44.050 AD32.2B44.100 AD32.2B44.160 AD40.2B44.050 AD40.2B44.100
40
Form AD+B
Double Contact
13
JIS-B-6339 (MAS BT 403)
THERMO Shrink-fit chucks x1 x2
d3
Radial runout ≤ 0,003 mm
d2 d1
4.5°
G2.5 at 25 000 min-1
40
Form AD+B
14
d1 3 3 3 4 4 4 5 5 5 6 6 6 8 8 8 10 10 10 12 12 12 14 14 14 16 16 16 18 18 18 20 20 20 25 25 25 32 32 32
d2 9 9 9 10 10 10 11 11 11 21 21 21 21 21 21 24 24 24 24 24 24 27 27 27 27 27 27 33 33 33 33 33 33 44 44 44 44 44 44
d3 16 16 22 17 17 22 18 18 22 27 27 27 27 27 27 32 32 32 32 32 32 34 34 34 34 34 34 42 42 42 42 42 42ß 52 52 52 53 53 53
x1 90 120 160 90 120 160 90 120 160 90 120 160 90 120 160 90 120 160 90 120 160 90 120 160 90 120 160 90 120 160 90 120 160 100 130 160 100 130 160
x2 37 37 37 37 37 37 41 41 41 47 47 47 47 47 47 50 50 50 50 50 50 52 52 52 58 58 58 63 63 63
Code SF03.B44.090 SF03.B44.120 SF03.B44.160 SF04.B44.090 SF04.B44.120 SF04.B44.160 SF05.B44.090 SF05.B44.120 SF05.B44.160 SF06.B44.090 SF06.B44.120 SF06.B44.160 SF08.B44.090 SF08.B44.120 SF08.B44.160 SF10.B44.090 SF10.B44.120 SF10.B44.160 SF12.B44.090 SF12.B44.120 SF12.B44.160 SF14.B44.090 SF14.B44.120 SF14.B44.160 SF16.B44.090 SF16.B44.120 SF16.B44.160 SF18.B44.090 SF18.B44.120 SF18.B44.160 SF20.B44.090 SF20.B44.120 SF20.B44.160 SF25.B44.100 SF25.B44.130 SF25.B44.160 SF32.B44.100 SF32.B44.130 SF32.B44.160
JIS-B-6339 (MAS BT 403)
THERMO Shrink-fit chucks
Compact execution
x1 x2 4.5° d2 d1
Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1
d1 6 8 10 12 14 16 18 20 25 32
d2 21 21 24 27 33 33 44 44 46 47
x1 65 65 65 65 70 70 70 70 70 75
x2 37 37 41 47 47 50 50 50 51 53
Code SF06.B44.065 SF08.B44.065 SF10.B44.065 SF12.B44.065 SF14.B44.070 SF16.B44.070 SF18.B44.070 SF20.B44.070 SF25.B44.070 SF32.B44.075
40
Form AD+B
15
JIS-B-6339 (MAS BT 403)
End mill holders x1
d2 d1
Radial runout ≤ 0,003 mm G6.3 at 25 000 min-1
40
Form AD+B
16
d1 6 6 6 6 6 8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 14 14 14 14 14 16 16 16 16 16
d2 25 25 25 25 25 28 28 28 28 28 35 35 35 35 35 42 42 42 42 42 44 44 44 44 44 48 48 48 48 48
x1 50 100 120 160 200 50 100 120 160 200 63 100 120 160 200 63 100 120 160 200 63 100 120 160 200 63 100 120 160 200
Code WE06.B44.050 WE06.B44.100 WE06.B44.120 WE06.B44.160 WE06.B44.200 WE08.B44.050 WE08.B44.100 WE08.B44.120 WE08.B44.160 WE08.B44.200 WE10.B44.063 WE10.B44.100 WE10.B44.120 WE10.B44.160 WE10.B44.200 WE12.B44.063 WE12.B44.100 WE12.B44.120 WE12.B44.160 WE12.B44.200 WE14.B44.063 WE14.B44.100 WE14.B44.120 WE14.B44.160 WE14.B44.200 WE16.B44.063 WE16.B44.100 WE16.B44.120 WE16.B44.160 WE16.B44.200
JIS-B-6339 (MAS BT 403)
End mill holders x1
d2 d1
Radial runout ≤ 0,003 mm G6.3 at 25 000 min-1
d1 18 18 18 18 18 20 20 20 20 20 20 25 25 25 25 25 25 32 32 32 32 32 40
d2 50 50 50 50 50 52 52 52 52 52 52 50 50 64 64 64 64 52 52 72 72 72 90
x1 63 100 120 160 200 35 63 100 120 160 200 35 63 100 120 160 200 45 63 100 160 200 120
Code WE18.B44.063 WE18.B44.100 WE18.B44.120 WE18.B44.160 WE18.B44.200 WE20.B44.035 WE20.B44.063 WE20.B44.100 WE20.B44.120 WE20.B44.160 WE20.B44.200 WE25.B44.035 WE25.B44.063 WE25.B44.100 WE25.B44.120 WE25.B44.160 WE25.B44.200 WE32.B44.045 WE32.B44.063 WE32.B44.100 WE32.B44.160 WE32.B44.200 WE40.B44.120
40
Form AD+B
17
JIS-B-6339 (MAS BT 403)
End mill holders Slim execution
d3
Radial runout ≤ 0,003 mm
d2 d1
x1
G6.3 at 25 000 min-1
40
Form AD+B
18
d1 6 6 6 8 8 8 10 10 10 12 12 12 14 14 14 16 16 16 18 18 18 20 20 20 25 25 25 32 32 32
d2 17 17 17 21 21 21 24 24 24 27 27 27 29 29 29 33 33 33 35 35 35 39 39 39 47 47 47 57 57 57
d3 23 28 29 27 32 33 30 35 36 33 38 39 35 40 41 39 44 45 41 46 47 45 48 49 47 47 47 57 57 57
x1 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160 100 160 160
Code WE06.B44.100F WE06.B44.130F WE06.B44.160F WE08.B44.100F WE08.B44.130F WE08.B44.160F WE10.B44.100F WE10.B44.130F WE10.B44.160F WE12.B44.100F WE12.B44.130F WE12.B44.160F WE14.B44.100F WE14.B44.130F WE14.B44.160F WE16.B44.100F WE16.B44.130F WE16.B44.160F WE18.B44.100F WE18.B44.130F WE18.B44.160F WE20.B44.100F WE20.B44.130F WE20.B44.160F WE25.B44.100F WE25.B44.130F WE25.B44.160F WE32.B44.100F WE32.B44.130F WE32.B44.160F
JIS-B-6339 (MAS BT 403)
End mill holders Internal coolant supply
x1
d2 d1
Radial runout ≤ 0,003 mm G6.3 at 25 000 min-1
d1 6 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 25 32 40
d2 25 25 28 28 35 35 42 42 44 44 48 48 50 50 52 52 64 72 90
x1 50 100 50 100 63 100 63 100 63 100 63 100 63 100 63 100 100 100 120
Code WE06.B44.050.IK WE06.B44.100.IK WE08.B44.050.IK WE08.B44.100.IK WE10.B44.063.IK WE10.B44.100.IK WE12.B44.063.IK WE12.B44.100.IK WE14.B44.063.IK WE14.B44.100.IK WE16.B44.063.IK WE16.B44.100.IK WE18.B44.063.IK WE18.B44.100.IK WE20.B44.063.IK WE20.B44.100.IK WE25.B44.100.IK WE32.B44.100.IK WE40.B44.120.IK
40
Form AD+B
19
JIS-B-6339 (MAS BT 403)
ER Collet chucks x1
d1
Radial runout ≤ 0,003 mm G6.3 at 25 000 min-1
40
Form AD+B
20
ER 16 16 16 16 16 20 20 20 20 20 25 25 25 25 25 32 32 32 32 32 40 40 40 40 40
Range 0.5 - 10 0.5 - 10 0.5 - 10 0.5 - 10 0.5 - 10 1 - 13 1 - 13 1 - 13 1 - 13 1 - 13 1 - 16 1 - 16 1 - 16 1 - 16 1 - 16 2 - 20 2 - 20 2 - 20 2 - 20 2 - 20 3 - 26 3 - 26 3 - 26 3 - 26 3 - 26
x1 63 100 130 160 200 60 100 130 160 200 60 100 130 160 200 70 100 130 160 200 80 100 130 160 200
d1 28 28 28 28 28 35 35 35 35 35 42 42 42 42 42 50 50 50 50 50 63 63 63 63 63
Code ER16.B44.063 ER16.B44.100 ER16.B44.130 ER16.B44.160 ER16.B44.200 ER20.B44.060 ER20.B44.100 ER20.B44.130 ER20.B44.160 ER20.B44.200 ER25.B44.060 ER25.B44.100 ER25.B44.130 ER25.B44.160 ER25.B44.200 ER32.B44.070 ER32.B44.100 ER32.B44.130 ER32.B44.160 ER32.B44.200 ER40.B44.080 ER40.B44.100 ER40.B44.130 ER40.B44.160 ER40.B44.200
JIS-B-6339 (MAS BT 403)
ER Collet chucks Mini execution
x1
d1
Radial runout ≤ 0,003 mm G6.3 at 25 000 min-1
ER 11 11 11 16 16 16 20 20 20 25 25 25
Range 0.5 - 7 0.5 - 7 0.5 - 7 0.5 - 10 0.5 - 10 0.5 - 10 1 - 13 1 - 13 1 - 13 1 - 16 1 - 16 1 - 16
x1 70 100 160 70 100 160 70 100 160 70 100 160
d1 16 16 16 22 22 22 28 28 28 35 35 35
Code ER11.B44.070M ER11.B44.100M ER11.B44.160M ER16.B44.070M ER16.B44.100M ER16.B44.160M ER20.B44.070M ER20.B44.100M ER20.B44.160M ER25.B44.070M ER25.B44.100M ER25.B44.160M
40
Form AD+B
21
JIS-B-6339 (MAS BT 403)
Morse taper holders for mills x1
d1
Radial runout ≤ 0,005 mm G6.3 at 25 000 min-1
40 Form AD
MK 1 2 3 4
x1 50 50 70 95
d1 25 32 40 48
Code MK1A.B40.050 MK2A.B40.050 MK3A.B40.070 MK4A.B40.095
Morse taper holders for drills x1
d1
Radial runout ≤ 0,005 mm G6.3 at 25 000 min-1
40 Form AD
22
MK 1 2 3 4
x1 50 50 70 95
d1 25 32 40 48
Code MK1B.B40.050 MK2B.B40.050 MK3B.B40.070 MK4B.B40.095
JIS-B-6339 (MAS BT 403)
Threaded shank milling cutter holders A
x1
d3 d2 M
Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1
M M6 M6 M6 M6 M8 M8 M8 M8 M10 M10 M10 M10 M12 M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16
A 25 50 75 100 25 50 75 100 25 50 75 100 25 50 75 100 125 150 25 50 75 100 125 150
x1 52 77 102 127 52 77 102 127 52 77 102 127 52 77 102 127 152 177 52 77 102 127 152 177
d2 10 10 10 10 13 13 13 13 18 18 18 18 21 21 21 21 21 21 29 29 29 29 29 29
d3 13 20 23 25 15 22.5 23 25 20 23 28 32 24 24 31 33 36 40 29 34 34 39 40 42.5
Code EF06.B44.052 EF06.B44.077 EF06.B44.102 EF06.B44.127 EF08.B44.052 EF08.B44.077 EF08.B44.102 EF08.B44.127 EF10.B44.052 EF10.B44.077 EF10.B44.102 EF10.B44.127 EF12.B44.052 EF12.B44.077 EF12.B44.102 EF12.B44.127 EF12.B44.152 EF12.B44.177 EF16.B44.052 EF16.B44.077 EF16.B44.102 EF16.B44.127 EF16.B44.152 EF16.B44.177
40
Form AD+B
23
JIS-B-6339 (MAS BT 403)
Combi shell mill holders for milling cutters d2
Radial runout ≤ 0,005 mm
d1
x1
G6.3 at 25 000 min-1 l1
40 Form AD
24
d1 16 16 16 22 22 22 27 27 27 32 32 32 40 40
x1 55 100 150 55 100 150 55 100 150 60 100 150 100 150
x2 45 90 140 43 88 138 43 88 138 46 86 136 86 136
d2 32 32 32 40 40 40 48 48 48 58 58 58 70 70
x2
l2 27 27 27 31 31 31 33 33 33 38 38 38 41 41
Code KD16.B40.055 KD16.B40.100 KD16.B40.150 KD22.B40.055 KD22.B40.100 KD22.B40.150 KD27.B40.055 KD27.B40.100 KD27.B40.150 KD32.B40.060 KD32.B40.100 KD32.B40.150 KD40.B40.100 KD40.B40.150
JIS-B-6339 (MAS BT 403)
Shell mill holders for cutters with driving slot
Internal coolant supply
x1
Radial runout ≤ 0,005 mm
d2 d1
l1
G6.3 at 25 000 min-1
d1 16 16 16 22 22 22 27 27 27 32 32 32 40 40
x1 35 100 160 35 100 160 35 100 160 50 100 160 50 100
l1 17 17 17 19 19 19 21 21 21 24 24 24 27 27
d2 38 38 38 48 48 48 50 50 50 78 78 78 89 89
Code AD16.B44.035 AD16.B44.100 AD16.B44.160 AD22.B44.035 AD22.B44.100 AD22.B44.160 AD27.B44.035 AD27.B44.100 AD27.B44.160 AD32.B44.050 AD32.B44.100 AD32.B44.160 AD40.B44.050 AD40.B44.100
40
Form AD+B
25
JIS-B-6339 (MAS BT 403)
Holders for indexable inserts drills x1
d2 d1
Radial runout ≤ 0,005 mm G6.3 at 25 000 min-1
40
Form AD+B
d1 20 25 32
x1 75 80 85
d2 40 45 52
Code VB20.B44.075 VB25.B44.080 VB32.B44.085
Quick-change tapping heads d1
x1
Length compensation in compression and tension.
40
Form AD+B
26
Tap size M3 - M14 M6 - M24 M14 - M33 M22 - M48
Compensation ± 7.5 ± 12.5 ± 20 ± 22.5
Insert size 1 2 3 4
x1 74 98 169 205
d1 36 53 78 96
Code GN12.B40.074 GN20.B40.098 GN33.B40.169 GN48.B40.205
JIS-B-6339 (MAS BT 403)
HV drill chucks for RH and LH rotation x1
d1
Radial runout ≤ 0,02 mm G2.5 at 25 000 min-1
mm 0.5 - 13 1 - 16
x1 92 95
d1 44 51
Code HV13.B44.092 HV16.B44.095
40 Form AD
Integrated precision drill chuck with Hexagonal key lock. For drilling, milling, reaming and tapping. Through coolant. Drill chuck slipping impossible due to chuck being screwed with the holder body. Compact design, enhanced reach. Range up to 13 or 16 mm.
NC drill chucks for RH rotation x1
Special wrench supplied. d1
Radial runout ≤ 0,03 mm G6.3 at 12 000 min-1
mm 0-8 0 - 10 1 - 13 3 - 16
x1 78 82 86 105
d1 37 43 48 53
Code NC08.B40.078 NC10.B40.082 NC13.B40.086 NC16.B40.105
40 Form A
Integrated drill chuck with high clamping force achieved through special wrench. 2x chucking torque vs. hand tightening. Drill bit slipping nearly impossible. Drill chuck slipping impossible due to chuck being screwed with the holder body. Compact design, external coolant supply. Range up to 8, 10, 13 or 16 mm.
27
JIS-B-6339 (MAS BT 403)
Blank bars x1
Cone and flange hardened and finished. d1
Machineable soft body. Pre-balanced
40 Form A
d1 63.5 63.5
x1 160 250
Code RL63.B40.160 RL63.B40.250
Test bars x1
Precisely ground length and diameter.
d1
Radial runout ≤ 0,003 mm Test certificate and protective case supplied.
40 Form A
28
d1 40
x1 250
Code TB40.B40.250
JIS-B-6339 (MAS BT 403)
© SAB d.o.o.
2021
29
JIS-B-6339 (MAS BT 403)
“3-in-1” THERMO Shrink-fit chucks
Internal coolant supply
x1 x2 4.5° d3 d2 d1
Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1
1 - Open
50
Form AD+B
Double Contact
d1 6 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 25 25 32 32
d2 21 21 21 21 24 24 24 24 27 27 27 27 33 33 33 33 44 44 44 44
d3 27 27 27 27 32 32 32 32 34 34 34 34 42 42 42 42 53 53 53 53
x1 100 130 100 130 100 130 100 130 100 130 100 130 100 130 100 130 100 130 100 130
x2 37 37 37 37 41 41 47 47 47 47 50 50 50 50 52 52 58 58 63 63
2 - Closed
3 - High speed
Code SF06.2B55.100.IK SF06.2B55.130.IK SF08.2B55.100.IK SF08.2B55.130.IK SF10.2B55.100.IK SF10.2B55.130.IK SF12.2B55.100.IK SF12.2B55.130.IK SF14.2B55.100.IK SF14.2B55.130.IK SF16.2B55.100.IK SF16.2B55.130.IK SF18.2B55.100.IK SF18.2B55.130.IK SF20.2B55.100.IK SF20.2B55.130.IK SF25.2B55.100.IK SF25.2B55.130.IK SF32.2B55.100.IK SF32.2B55.130.IK
Including high speed nozzles and sealing plugs
30
JIS-B-6339 (MAS BT 403)
Extended “3-in-1” THERMO Shrink-fit chucks Internal coolant supply
x1 x2 4.5°
2°
d3 d2 d1
Radial runout ≤ 0,003 mm
1 - Open
d1 6 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 25 25 32 32
2 - Closed
d2 21 21 21 21 24 24 24 24 27 27 27 27 33 33 33 33 44 44 44 44
G2.5 at 25 000 min-1
3 - High speed
d3 32.5 35.5 32.5 35.5 36.6 39.5 36.6 39.5 39.1 41.9 39.1 41.9 46.2 49 46.2 49 57.2 60 57.2 60
x1 160 200 160 200 160 200 160 200 160 200 160 200 160 200 160 200 160 200 160 200
x2 37 37 37 37 41 41 47 47 47 47 50 50 50 50 52 52 58 58 63 63
Code SF06.2B55.160.IK SF06.2B55.200.IK SF08.2B55.160.IK SF08.2B55.200.IK SF10.2B55.160.IK SF10.2B55.200.IK SF12.2B55.160.IK SF12.2B55.200.IK SF14.2B55.160.IK SF14.2B55.200.IK SF16.2B55.160.IK SF16.2B55.200.IK SF18.2B55.160.IK SF18.2B55.200.IK SF20.2B55.160.IK SF20.2B55.200.IK SF25.2B55.160.IK SF25.2B55.200.IK SF32.2B55.160.IK SF32.2B55.200.IK
50
Form AD+B
Double Contact
Including high speed nozzles and sealing plugs
31
JIS-B-6339 (MAS BT 403)
3º THERMO Shrink-fit chucks Slim execution
x1 x2 3° d3 d2 d1
Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1
50
Form AD+B
Double Contact
32
d1 6 6 6 8 8 8 10 10 10 12 12 12 16 16 16
d2 12 12 12 14 14 14 16 16 16 18 18 18 24 24 24
d3 18 21 24 20 23 26 22 25 28 24 27 30 30 33 36
x1 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160
x2 37 37 37 37 37 37 41 41 41 47 47 47 47 47 47
Code SF06.2B55.100.3 SF06.2B55.130.3 SF06.2B55.160.3 SF08.2B55.100.3 SF08.2B55.130.3 SF08.2B55.160.3 SF10.2B55.100.3 SF10.2B55.130.3 SF10.2B55.160.3 SF12.2B55.100.3 SF12.2B55.130.3 SF12.2B55.160.3 SF16.2B55.100.3 SF16.2B55.130.3 SF16.2B55.160.3
JIS-B-6339 (MAS BT 403)
ER Collet chucks x1
d1
Radial runout ≤ 0,003 mm G6.3 at 18 000 min-1
ER 16 16 16 25 25 25 32 32 32 40 40 40
Range 0.5 - 10 0.5 - 10 0.5 - 10 1 - 16 1 - 16 1 - 16 2 - 20 2 - 20 2 - 20 3 - 26 3 - 26 3 - 26
x1 100 160 200 100 160 200 100 160 200 100 160 200
d1 28 28 28 42 42 42 50 50 50 63 63 63
Code ER16.2B55.100 ER16.2B55.160 ER16.2B55.200 ER25.2B55.100 ER25.2B55.160 ER25.2B55.200 ER32.2B55.100 ER32.2B55.160 ER32.2B55.200 ER40.2B55.100 ER40.2B55.160 ER40.2B55.200
50
Form AD+B
Double Contact
Shell mill holders for cutters with driving slot
Internal coolant supply
x1
Radial runout ≤ 0,005 mm
d2 d1
l1
G6.3 at 18 000 min-1
d1 16 16 16 22 22 22 27 27 27 32 32 32 40 40 40
x1 50 100 160 55 100 160 55 100 160 55 100 160 55 100 160
l1 17 17 17 19 19 19 21 21 21 24 24 24 27 27 27
d2 38 38 38 48 48 48 50 50 50 78 78 78 89 89 89
Code AD16.2B55.050 AD16.2B55.100 AD16.2B55.160 AD22.2B55.055 AD22.2B55.100 AD22.2B55.160 AD27.2B55.055 AD27.2B55.100 AD27.2B55.160 AD32.2B55.055 AD32.2B55.100 AD32.2B55.160 AD40.2B55.055 AD40.2B55.100 AD40.2B55.100
50
Form AD+B
Double Contact
33
JIS-B-6339 (MAS BT 403)
THERMO Shrink-fit chucks x2 4.5° d3 d2 d1
Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1
50
Form AD+B
34
d1 3 3 3 4 4 4 5 5 5 6 6 6 8 8 8 10 10 10 12 12 12 14 14 14 16 16 16 18 18 18 20 20 20 25 25 25 32 32 32
x1
d2 9 9 9 10 10 10 11 11 11 21 21 21 21 21 21 24 24 24 24 24 24 27 27 27 27 27 27 33 33 33 33 33 33 44 44 44 44 44 44
d3 16 16 22 17 17 22 18 18 22Í 27 27 27 27 27 27 32 32 32 32 32 32 32 32 32 34 34 34 42 42 42 42 42 42 53 53 53 53 53 53ß
x1 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160
x2 37 37 37 37 37 37 41 41 41 47 47 47 47 47 47 50 50 50 50 50 50 52 52 52 58 58 58 63 63 63
Code SF03.B55.100 SF03.B55.130 SF03.B55.160 SF04.B55.100 SF04.B55.130 SF04.B55.160 SF05.B55.100 SF05.B55.130 SF05.B55.160 SF06.B55.100 SF06.B55.130 SF06.B55.160 SF08.B55.100 SF08.B55.130 SF08.B55.160 SF10.B55.100 SF10.B55.130 SF10.B55.160 SF12.B55.100 SF12.B55.130 SF12.B55.160 SF14.B55.100 SF14.B55.130 SF14.B55.160 SF16.B55.100 SF16.B55.130 SF16.B55.160 SF18.B55.100 SF18.B55.130 SF18.B55.160 SF20.B55.100 SF20.B55.130 SF20.B55.160 SF25.B55.100 SF25.B55.130 SF25.B55.160 SF32.B55.100 SF32.B55.130 SF32.B55.160
JIS-B-6339 (MAS BT 403)
End mill holders Internal coolant supply
x1
d2 d1
Radial runout ≤ 0,003 mm G6.3 at 18 000 min-1
d1 6 8 10 12 14 16 18 20 25 32 40
d2 25 28 35 42 44 48 50 52 65 72 90
x1 63 63 80 80 80 80 80 80 100 105 105
Code WE06.B55.063.IK WE08.B55.063.IK WE10.B55.080.IK WE12.B55.080.IK WE14.B55.080.IK WE16.B55.080.IK WE18.B55.080.IK WE20.B55.080.IK WE25.B55.100.IK WE32.B55.105.IK WE40.B55.105.IK
50
Form AD+B
35
JIS-B-6339 (MAS BT 403)
End mill holders x1
d2 d1
Radial runout ≤ 0,003 mm G6.3 at 18 000 min-1
50
Form AD+B
36
d1 6 6 6 6 6 8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 14 14 14 14 14
d2 25 25 25 25 25 28 28 28 28 28 35 35 35 35 35 42 42 42 42 42 44 44 44 44 44
x1 63 100 130 160 200 63 100 130 160 200 80 100 130 160 200 80 100 130 160 200 80 100 130 160 200
Code WE06.B55.063 WE06.B55.100 WE06.B55.130 WE06.B55.160 WE06.B55.200 WE08.B55.063 WE08.B55.100 WE08.B55.130 WE08.B55.160 WE08.B55.200 WE10.B55.080 WE10.B55.100 WE10.B55.130 WE10.B55.160 WE10.B55.200 WE12.B55.080 WE12.B55.100 WE12.B55.130 WE12.B55.160 WE12.B55.200 WE14.B55.080 WE14.B55.100 WE14.B55.130 WE14.B55.160 WE14.B55.200
JIS-B-6339 (MAS BT 403)
End mill holders x1
d2 d1
Radial runout ≤ 0,003 mm G6.3 at 18 000 min-1
d1 16 16 16 16 16 18 18 18 18 18 20 20 20 20 20 25 25 25 25 32 32 32 32 40 50
d2 48 48 48 48 48 50 50 50 50 50 52 52 52 52 52 65 65 65 65 72 72 72 72 90 90
x1 80 100 130 160 200 80 100 130 160 200 80 100 120 160 200 100 130 160 200 105 130 160 200 105 125
Code WE16.B55.080 WE16.B55.100 WE16.B55.130 WE16.B55.160 WE16.B55.200 WE18.B55.080 WE18.B55.100 WE18.B55.130 WE18.B55.160 WE18.B55.200 WE20.B55.080 WE20.B55.100 WE20.B55.130 WE20.B55.160 WE20.B55.200 WE25.B55.100 WE25.B55.130 WE25.B55.160 WE25.B55.200 WE32.B55.105 WE32.B55.130 WE32.B55.160 WE32.B55.200 WE40.B55.105 WE50.B55.125
50
Form AD+B
37
JIS-B-6339 (MAS BT 403)
ER Collet chucks x1
d1 d2 d1
Radial runout ≤ 0,003 mm G6.3 at 18 000 min-1
50
Form AD+B
38
ER 16 16 16 16 16 25 25 25 25 25 32 32 32 32 32 40 40 40 40 40
Range 0.5 - 10 0.5 - 10 0.5 - 10 0.5 - 10 0.5 - 10 1 - 16 1 - 16 1 - 16 1 - 16 1 - 16 2 - 20 2 - 20 2 - 20 2 - 20 2 - 20 3 - 26 3 - 26 3 - 26 3 - 26 3 - 26
x1 63 100 130 160 200 60 100 130 160 200 70 100 130 160 200 80 100 130 160 200
d1 28 28 28 28 28 42 42 42 42 42 50 50 50 50 50 63 63 63 63 63
Code ER16.B55.063 ER16.B55.100 ER16.B55.130 ER16.B55.160 ER16.B55.200 ER25.B55.060 ER25.B55.100 ER25.B55.130 ER25.B55.160 ER25.B55.200 ER32.B55.070 ER32.B55.100 ER32.B55.130 ER32.B55.160 ER32.B55.200 ER40.B55.080 ER40.B55.100 ER40.B55.130 ER40.B55.160 ER40.B55.200
JIS-B-6339 (MAS BT 403)
ER Collet chucks Mini execution
x1
d1
Radial runout ≤ 0,003 mm G6.3 at 18 000 min-1
ER 11 11 16 16 20 20 25 25
Range 0.5 - 7 0.5 - 7 0.5 - 10 0.5 - 10 1 - 13 1 - 13 1 -16 1 - 16
x1 100 160 100 160 100 160 100 160
d1 16 16 22 22 28 28 35 35
Code ER11.B55.100M ER11.B55.160M ER16.B55.100M ER16.B55.160M ER20.B55.100M ER20.B55.160M ER25.B55.100M ER25.B55.160M
50
Form AD+B
39
JIS-B-6339 (MAS BT 403)
Morse taper holders for mills x1
d1
Radial runout ≤ 0,005 mm G6.3 at 18 000 min-1
50
Form AD+B
MK 1 2 3 4
x1 45 60 65 70
d1 25 32 40 48
Code MK1A.B50.045 MK2A.B50.060 MK3A.B50.065 MK4A.B50.070
Morse taper holders for drills x1
d1
Radial runout ≤ 0,005 mm G6.3 at 18 000 min-1
50
Form AD+B
40
MK 1 2 3 4 5
x1 45 60 65 95 100
d1 25 32 40 48 63
Code MK1B.B50.045 MK2B.B50.060 MK3B.B50.065 MK4B.B50.095 MK5B.B50.105
JIS-B-6339 (MAS BT 403)
Threaded shank milling cutter holders x1 A
d3 d2 M
Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1
M M8 M8 M8 M10 M10 M10 M12 M12 M12 M16 M16 M16
A 50 100 150 50 100 150 50 100 150 50 100 150
x1 88 138 188 88 138 188 88 138 188 88 138 188
d2 13 13 13 18 18 18 21 21 21 29 29 29
d3 22.5 25 30 23 31.5 36 24 32.5 39.5 34 36 42
Code EF08.B55.088 EF08.B55.138 EF08.B55.188 EF10.B55.088 EF10.B55.138 EF10.B55.188 EF12.B55.088 EF12.B55.138 EF12.B55.188 EF16.B55.088 EF16.B55.138 EF16.B55.188
50
Form AD+B
41
JIS-B-6339 (MAS BT 403)
Combi shell mill holders for milling cutters d2
Radial runout ≤ 0,003 mm
d1
x1
G6.3 at 18 000 min-1 l1
50 Form AD
42
d1 16 16 16 22 22 22 22 27 27 27 27 32 32 32 32 40 40 40 40 50
x1 70 100 150 70 100 150 200 70 100 150 200 70 100 150 200 70 100 150 200 70
x2 45 90 140 43 88 138 188 43 88 138 188 41 86 136 186 41 86 136 186 54
d2 32 32 32 40 40 40 40 48 48 48 48 58 58 58 58 70 70 70 70 90
x2
l2 27 27 27 31 31 31 31 33 33 33 33 38 38 38 38 41 41 41 41 46
Code KD16.B50.070 KD16.B50.100 KD16.B50.150 KD22.B50.070 KD22.B50.100 KD22.B50.150 KD22.B50.200 KD27.B50.070 KD27.B50.100 KD27.B50.150 KD27.B50.200 KD32.B50.070 KD32.B50.100 KD32.B50.150 KD32.B50.200 KD40.B50.070 KD40.B50.100 KD40.B50.150 KD40.B50.200 KD50.B50.070
JIS-B-6339 (MAS BT 403)
Shell mill holders for cutters with driving slot Internal coolant supply
x1
Radial runout ≤ 0,003 mm
d2 d1
l1
G6.3 at 18 000 min-1
d1 16 16 16 22 22 22 22 27 27 27 27 32 32 32 32 40 40 40 40 60
x1 50 100 160 55 100 160 200 55 100 160 200 55 100 160 200 55 100 160 200 80
l1 17 17 17 19 19 19 19 21 21 21 21 24 24 24 24 27 27 27 27 40
d2 38 38 38 48 48 48 48 50 50 50 50 78 78 78 78 89 89 89 89 129
Code AD16.B55.050 AD16.555.100 AD16.B55.160 AD22.B55.055 AD22.B55.100 AD22.B55.160 AD22.B55.200 AD27.B55.055 AD27.B55.100 AD27.B55.160 AD27.B55.200 AD32.B55.055 AD32.B55.100 AD32.B55.160 AD32.B55.200 AD40.B55.055 AD40.B55.100 AD40.B55.160 AD40.B55.200 AF60.B50.070
50
Form AD+B
43
JIS-B-6339 (MAS BT 403)
Holders for indexable inserts drills x1
d2 d1
Radial runout ≤ 0,005 mm G6.3 at 18 000 min-1
50
Form AD+B
d1 20 25 32 40
x1 90 90 90 100
d2 40 45 52 60
Code VB20.B55.090 VB25.B55.090 VB32.B55.090 VB40.B55.100
Quick-change tapping head d1
x1
Length compensation in compression and tension
50 Form A
44
Tap size M3 - M14 M6 - M24 M14 - M33 M22 - M48
Compensation ± 7.5 ± 12.5 ± 20.0 ± 22.5
Insert size 1 2 3 4
x1 83 107 168 184
d1 36 53 78 96
Code GN12.B50.083 GN20.B50.107 GN33.B50.168 GN48.B50.175
JIS-B-6339 (MAS BT 403)
HV drill chucks for RH and LH rotation x1
d1
Radial runout ≤ 0,02 mm G6.3 at 18 000 min-1
mm 1 - 16
x1 106
d1 51
Code HV16.B55.106
50 Form AD
Integrated precision drill chuck with Hexagonal key lock. For drilling, milling, reaming and tapping. Through coolant. Drill chuck slipping impossible due to chuck being screwed with the holder body. Compact design, enhanced reach.
NC drill chucks for RH rotation x1
Special wrench supplied. d1
Radial runout ≤ 0,03 mm G6.3 at 12 000 min-1
mm 1 - 13 3 - 16
x1 93 96
d1 48 53
Code NC13.B50.096 NC16.B50.115
50 Form A
Integrated drill chuck with high clamping force achieved through special wrench 2x chucking torque vs. hand tightening Drill bit slipping nearly impossible Drill chuck slipping impossible due to chuck being screwed with the holder body. Compact design, external coolant supply. Range up to 8, 10, 13 or 16 mm.
45
JIS-B-6339 (MAS BT 403)
Blank bars x1
Cone and flange hardened and finished. d1
Machineable soft body. Pre-balanced
50 Form AD
d1 100 100
x1 160 250
Code RL10.B50.160 RL10.B50.250
Test bars x1
Test certificate and protective case supplied. Radial runout ≤ 0,003 mm
50 Form A
46
d1 63
d1
Precisely ground length and diameter.
x1 250
Code TB63.B50.250
© SAB d.o.o.
2021
Find additional information and product catalogues
www.sab.hr
SAB d.o.o. Podborska 1b / 43500 Daruvar tel. + 385 43 675 850 fax. + 385 43 334 700 sab@sab.hr / www.sab.hr Note: Product photos and illustrations are not binding. Product descriptions, technical specifications and dimensions are binding only when explicitly agreed upon. We reserve right to make technical modifications as well as price changes. We take no liability for print or type errors. Only our terms and conditions are valid. 09/2020