NEW Products
Peel & Stick In-Floor Heat Truss Screws The new SPAX PowerLags engineered fasteners are designed for use in attaching truss/rafters to wall plates for ensuring a building code required continuous attachment method from floor to roof. The #14 x 6-1/4” truss screws feature T-Star plus drive within a cylindric head, patented thread serrations, and Unique 4Cut points for quick and easy installation with no pre-drilling required. They are made of carbon steel with SPAX exclusive WIROX coating, which is ideal for interior framing use.
The only peel-and-stick, primerless, cut-to-fit, ground wired in-floor heating system in an ultra-thin profile has been introduced by Protecto Wrap. Peel & Heat Cutting Edge’s length can be cut down to fit the room’s layout right out of the box with no dry or curing time needed. Just peel and stick, run the pre-wired mat into the thermostat (sold separately) and then into a designated 20-amp breaker. n PROTECTOWRAP.COM (800) 759-9727
n SPAX.US (419) 636-6715
Stone-Look Sills TAMKO Building Products is launching the Heritage Proline series of premium architectural shingles with two new laminated asphalt shingles designed for easier installation and higher performance in withstanding extreme weather conditions. Titan XT features the expanded Rapid Fire Zone nailing zone, AnchorLock layer reinforced common bond, Advanced Fusion enhanced sealants, UltraMAX Weathering top coating, and industry-first WindGuard high-wind warranty. StormFighter IR offers similar benefits and is classified by UL for compliance with UL 2218 Class 4 Impact Resistance.
Derby Building Products is debuting Tando Architectural Sill and Architectural Sill Corner to complement TandoStone composite stone. Both products are architecturally accurate and offer the realistic look and feel of natural stone. Designed with a slope forward to direct water away from a structure, the sill products offer superior moisture management while delivering beauty and functionality. The complementary sill corner can be used as a corner—or can be cut on the left or right side to act as an end cap to terminate a run. They come in three rich colors: Pewter, Raven and Sable. The sill measures 30.13” long with an exposed height of 2.63”. Corners measure 5” on each face with the same exposed height.
n TAMKO.COM (800) 641-4691
n TANDOBP.COM (954) 556-1800
Pro Roofing
52
n
The Merchant Magazine n
April 2021
Building-Products.com
