WELCOME TO THE WORLD OF AIRBRUSH DOJO
Danny Rowland-Instructor & Artist
www.airbrushdojo.com
Page | 1
Written By Danny Rowland Airbrush Basics What’s happening when you spray? Let’s explore the basic underlying concepts of spraying with an airbrush [Request this complete guide if you are looking for best airbrush]. Once you know what’s happening and why, you’ll be able to bend or even break the normal rules to create stunning effects and techniques. Remember… “Knowledge is power”
Table of Contents
Aerosol Spray
Dot + Motion = Line
Airbrushes Spray in a Cone Shape
Good Airbrush Technique
Circular Spray Pattern
Hard Edges Through Sacrifice
Dots, dots, and more dots
Conclusion
Call us at (817)705-0686 or at our website: www.airbrushdojo.com
www.airbrushdojo.com
Aerosol spray Airbrush basics start with the spray. Knowing what’s happening gives you the power to control and modify the effects you’re trying to achieve. Technical jargon warning. An aerosol spray is a mixture of two or more liquids with a gas. The liquid gets broken up into tiny droplets, atomized. The atomized liquid is suspended in the gas, usually air. Liquids in suspension tend to settle. It gradually falls to the floor. End of technical jargon. When the liquid hits the air stream the force of the moving air breaks up and atomizes the liquid into small globules (think tiny spheres but not nearly as neat and perfect as a sphere should be). When the globule hits something it forms a dot. The height and width of the dot is determined by how much the droplet dries before impact with the surface.
Greater air pressure = smaller dot = drier, rougher spray texture
Lower air pressure = larger dot = wetter, smoother spray texture
Thousands of these tiny dots (many of them smaller than you can see) form larger shapes as determined by the user. Users try to spray with as little pressure as possible, but enough to actually break up the paint being sprayed.
Thicker, chunkier paint = greater pressure to pull and atomize the paint
Runnier, more uniform paint = less pressure to pull and atomize the paint
Pressure and droplet size determines how much paint actually contacts and ‘sticks’ to the surface being sprayed.
Greater pressure = less paint sticking to the surface
Less pressure = more paint sticking to the surface
Everybody is always trying to find the happy medium between paint coverage and paint loss due to overspray. But I do need to bring up one other rule here. Overspray. Overspray is the biggest health risk any painter faces. Breathe it and bad things will happen to you over time. So here’s the biggest rule.
Call us at (817)705-0686 or at our website: www.airbrushdojo.com
Page | 2
www.airbrushdojo.com Airbrushes spray in a cone shape The tip (apex) of this spray cone starts somewhere between the needle’s tip and the nozzle’s tip depending on how much liquid you’re letting out at any one time.
Less paint = cone’s apex closer to the needle’s tip
More paint = cone’s apex closer to the nozzle’s tip
The size of the cone’s bottom (your spray pattern) is determined by how far you’re holding the airbrush away from the surface being sprayed.
Airbrush closer to the surface = smaller spray area
Airbrush further from the surface = larger spray area
I should also mention that paint builds up quicker the closer you hold the airbrush to the surface. This is because you’re spraying the same amount of paint in the same amount of time over a smaller or larger area, therefore…
Airbrush closer to the surface = quick paint build up
Airbrush further from the surface = slow paint build up
You can check it out for yourself. Also notice that once the paint “saturates” the surface it runs away. This is called a run. Runs are generally bad in any kind of painting.
Circular Spray Pattern Your spray pattern should be circular. You do this by holding the airbrush perpendicular to the surface being sprayed. Always. In other words you always spray straight onto the surface. Don’t spray at an angle or you’ll get an off-kilter oval spray pattern. If you’re trying to spray offkilter oval-shaped spray patterns, then by all means experiment with angle, otherwise spray straight onto the surface for the circle. Every technique any painter teaches you starts with you spraying perpendicular to the surface.
Dots, dots, and more dots. The circular dot is the basic shape that everything gets built out of while you airbrush. Here’s how you do it. Spray a quick blast of paint without moving your hand. Congratulations. You have a dot.
Large dots = spray further from the needle’s tip
Small dots = spray closer to the needle’s tip
Call us at (817)705-0686 or at our website: www.airbrushdojo.com
Page | 3
www.airbrushdojo.com Notice, again that it takes more time to ‘cover’ the larger area with paint than it does to ‘cover’ the smaller area. Remember…
Spray intensity is greater the closer you are to the surface
Spray intensity is less the further you are from the surface
All this means that it takes lots of time to cover large areas adequately and a really short amount of time to cover smaller areas. This means that you’ll spray details quickly but backgrounds slowly.
Dot + Motion = Line Start spraying a dot and move your hand parallel to the surface. Congratulations. You’ve got a line. If you did it like most beginners then you started spraying paint and then moved your hand. Notice the larger ‘dot’ at the beginning of the line. You spent more time there so the paint covered more.
Start moving your hand before you start spraying and you’ll eliminate this problem.
Stop moving your hand after you stop spraying to eliminate a possible dot at the other end.
Good Airbrush Technique
Air On
Paint On
Paint Off
Air Off
Turn your air on, then paint, turn your paint off, then turn your air off. It’s simple. But why? That’s easy, for two reasons… 1. When airbrush problems happen, then generally happen when the air pressure changes dramatically. I.e. when you turn your air on and off. This is the most likely time for your airbrush to spit, or sputter. You should always…Turn your air on and off on a test sheet to save your work from splats of paint and miss fires. 2. Keeping the motions separate helps you do better work, for instance it lets you avoid dots at the beginning of your lines and dagger strokes.
Call us at (817)705-0686 or at our website: www.airbrushdojo.com
Page | 4
www.airbrushdojo.com Dagger Strokes To form a line, move your hand parallel to the surface of the work while spraying. But what happens when you vary the distance from your hand to the work? You get a dagger stroke. They take practice to get consistent. But it’s worth it, especially if you want to learn how to write in script.
Hard Edges through Sacrifice A line is all well and good, but what if you want something that covers more area than a small, tight, line. If you have amazing technique and excellent muscle memory (you have to do that same motion over and over just moved slightly over) you can fill in a larger 2 dimensional shape freehand and still preserve your hard edges. For those of us who haven’t penetrated the depths of airbrushing magic (or who use a spray gun) we need a mask. A mask presents a barrier between the piece being sprayed and the spray. It takes the heat in order to shield the piece below.
The closer a mask is to the surface the more defined the edge becomes.
The further the mask is from the surface the less defined the edge becomes.
For instance lay a strip of masking tape onto your work and spray it. Then pull off the tape. You’ll get a defined hard line. Or take a piece a paper and hold it about an inch in front of the work. Spray it. You should get some overspray underneath your paper mask (called a stencil or shield). The edge isn’t as defined as the taped edge, but it should be a harder edge than what you could’ve sprayed on your own.
Conclusion But wait there’s more! There’s always more, but this was simply a general overview of the rules most air brushers figure out on their own. Now it’s your turn, go practice! Go discover! Go find out what your equipment can do! Getting your airbrush basics down lets you move on to more advanced ideas and concepts. Most users understand what I just told you, though they probably never put their understanding into words. Master the fundamentals and everything else becomes easier. Skip your airbrush basics and you’ll run into hardships later.
Call us at (817)705-0686 or at our website: www.airbrushdojo.com
Page | 5