THE WORLD’S MOST PRECOCIOUS SPEAKER
The Divine is a small, un-assuming looking speaker, and at first glance doesn’t look too unusual…. until you get into the details.The devil is always in the detail! The Divine is beautifully built from diecast aluminium. It looks wonderful and is reassuringly solid at 1.7kg Divine Networking The Divine is a Dante/AES67 network audio speaker, with PoE powering its class D amplifier, from a compatible switch or midspan PoE injector. This means just a single network cable via the EtherCON connection. As well as power, this connection provides 4 audio sources from the network that are available for monitoring. Just connect the Divine to your network and four audio destinations are available when controlling the routing via Dante Controller.
There is a volume pot for level which goes all the way up to 11! Both the volume and input select button can be disabled separately so the user can’t have any control. The input trim of any individual channel can be adjusted by the user by holding the select button when on a channel and adjusting the level control.
For a speaker, transmit channels are not required but the Divine does output a 1kHz test tone back to the network, which is an appreciated feature. Divine User The 4 channels can be monitored individually, in pairs, or all 4 mixed together, via the front panel selection button which loops through the available options. This is very useful for monitoring a programme source and a talkback channel together, or if you just need to monitor multi channel audio on a single speaker. Channels or channel mixes can be limited however so the user can’t get to them! 48 | Source Material by Canford
Call UK sales on +44(0)191 418 1122 or email sales@canford.co.uk
