BLUEKIT速
The easy way to energy-efficient ventilation for lift shafts
w w w.b l u ek i t .e u
VENTILATION AND SMOKE EXTRACTION
Of lift shafts Lift shafts with savings potential The use of state-of-the-art technology enables targeted and controlled ventilation of lift shafts – heat losses are drastically
Safety through innovative technology Made in Germany
reduced, energy consumption and CO2 emission of the building
BK-Factory is one of the market
drop significantly. In case of fire, hot gases and toxic fumes are
leaders
quickly and reliably routed outdoors.
smoke extraction of lift shafts.
Our BlueKit® system for lift shaft smoke extraction and
With Bluekit®, we offer one
ventilation offers not only safe smoke extraction, but also
of
tremendous energy savings through controlled ventilation. Do
systems on the market – with continuous further development
the math yourself and be surprised: To see how much money
always according to the latest state-of-the-art and, of course,
you could actually save with BlueKit®, go online and find out at
in accordance with all stipulated requirements. We have an
www.bluekit.eu and genereate you own energy savings report.
extensive modular range of components available. This allows
the
for
best
ventilation
and
state-of-the-art
us to offer you exactly the solution you need: individual and completely tailored to your demands.
11 good reasons for a lift schaft smoke extraction from BK-Factory • • •
BK-Factory all-around service: planning, installation, maintenance and inspection all from a single source BK-Factory provides you with the best service possible. We accompany you while you develop and plan the system that is right for you. We supply and install the complete system and handle the
• • • • • • • •
Average savings in heating costs of EUR 1,000 per annum and lift More safety in the building Increase in value through optimized building Energy Performance Certificate Convincing price-performance ratio Straightforward installation effort Convenient retrofitting in existing buildings No moisture, no mould in the shaft Improved air quality in lift shaft and car Comfortable building climate: no draught and flow-based disturbing noise Important contribution for environmental protection Completely carefree support from BK-Factory
maintenance - rely on the all-around service from a single source! Our experienced team of experts are always at your side.
BlueKit® considers all industrial designs and patent claims.
Intelligent solutions: fully automatic, convenient ans safe
PAT E N T E D
Regardless of which one of our BlueKit systems you select for the ventilation and smoke extraction of your lift shaft, the only thing you need to arrange for is the installation - the system takes over everything else. This includes not only temperature monitoring and time-controlled ventilation, but also intelligent ventilation after lift usage and the measurement of air quality and moisture. Our systems can be individually adapted to all requirements.
2
EN_BLUEKIT_BOOKLET_BKAIO_20140605
THE NEW BLUEKIT-AIO
All In One BlueKit-AIO: as small and simple as it gets As an enhancement to our BlueKit® system proven in use around the world, the new BlueKit-AIO system features a particularly compact design. The BlueKit-AIO was developed to be able to be installed more quickly and easily: You receive a complete system with only a handful of components - cost-effective, installed in no time and ready for use immediately. Thanks to the especially short amortisation period, this investment really pays off!
The customized ready-to-use ventilation and smoke extraction system The new BlueKit® system is ideal for lifts with or without a machine room as well as group systems. The systems are primarily installed in the top of the shaft or in an equipment or machine room. Both functional and economic aspects were considered during development, so that your lift system can be operated effectively and efficiently.
the new BK-AIO: Simply clever! The highlight from the BK-Factory company combines all the technological and normative requirements in one compact controller. This allows BK-AIO (ALL IN ONE), the most stateof the- art and most intelligent controller for lift shaft smoke extraction, to set completely new standards in lift shafts. The new
BK-AIO - Perfection in detail
BlueKit® system succeeded in meeting customer requests for
• • • • • •
simple handling, smallest dimensions, unobtrusive appearance and fast installation. For convenient installation, we equipped the BK-AIO controller with plug-in connectors that can be fitted with commercially available RJ45 connection cables. The 230 V
Plug-in component connections Integrable emergency power batteries Configurable via encoding switch Intelligent ventilation function Integrated temperature sensor New fire detection with maximum safety
connection also features a plug-in design.
3
LIFT BEAM
Your scanner in case of fire The new LIFT Beam The infrared optical beam fire detector ensures active early fire detection in lift shafts. The system includes an infrared transmitter and receiver in one device: A clearly marked beam is guided to a reflecting prism, which reflects the beam onto the receiver for analysis. An alarm will be triggered if the beam comes into contact with smoke. The LIFT Beam, specifically developed and tested for use in the lift shaft, is CE-certified in accordance with EN 54-12.
The highlights of the LIFT Beam: •
Integrated laser: for targeted adjustment of beam and reflector
•
Auto-align: automatic, motorised alignment of the infrared beam
•
Auto-optimise:
compensating
movements and contaminations
4
building
LIFT STATUS
Reporting unit Advanced controller functions thanks to the lift status reporting unit
For your safety: meaningful measurements at the lift car
An additional module that packs a punch: As a supplement to the new BK-AIO central unit, it is the complete intelligence in the smallest design. The LST Lift-Status-Transmitter recognises the presence of passengers in the lift car and regulates the air quality in the lift shaft and, therefore, the car as well. Ventilation mode and duration can be adapted to the requirements of the building’s users at any time.
An integrated temperature sensor measures the ambient temperature exactly where the measurement is the most important: Directly in the car and not at a random point somewhere in the shaft. The air quality sensor is integrated in the LST from where it transmits the information about the hygienic air demand wireless via radio transmitter to he receiving unit. The transmitter features a built-in acceleration sensor. This enables it to determine the movement of the lift and transmit this information to the receiving unit. A lift breakdown is determined intelligently via an innovative sensor system. The module can be supplied with the 230 V AC supply voltage located on the car roof via an integrated separate fuse. A lithium battery is available as an alternative which serves as an autonomously functioning voltage source for approx. 3 years.
By monitoring the lift use, the LST automatically determines changes in the use of the building and automatically adjusts the ventilation to the need. It is a closed unit that communicates with the BK-AIO central unit or with the remote LSR radio receiver using a wireless LST radio transmitter. If no information about the status (e.g. breakdown, travel, stop) of the lift is available via isolated contacts, this module initiates a demand-optimised ventilation of the lift shaft. Features: • Ventilation times and other functions are set via small switches without requiring a tool. • LEDs inform about the status of the transmitter as needed. • For quick installation and commissioning, the transmitter also features only plug-in connections. BlueKit- LST and LSR - Perfection in detail • • • • • • • • •
Plug-in connection Battery operation or 230 V connection Usage-dependent ventilation function Integrated temperature sensor Integrated air quality sensor Integrated acceleration sensor Connectable PIR sensor Service button for maintenance work Integrated 868.3 MHz radio transmitter
5
SUPPLEMENT PRODUCTS
BlueKit速 Effective lift shaft smoke extraction: To suit all your needs! We developed an extensive line of accessories to supplement our new BK-AIO controller. This enables BlueKit速 solutions for the lift shaft smoke extraction to perfectly adapt to the respective conditions and individual requests. If you should ever lack something, simply contact us!
Manual triggering: shev button with integrated ventilation button
Automatic fire detection : smoke extraction system or optical smoke detector In addition to the new LIFT Beam, we naturally continue to offer our MICRO-SENS速 smoke extraction system: the alternative fire detection with the proven detector module. The smoke extraction system is complemented by the matching intake pipe set. The optical smoke detector is primarily used for monitoring the machine room and the main evacuation level and, as such, supplements the fire detection elements for the lift shaft in a meaningful way.
As an addition to the permanent monitoring of the lift shaft by the smoke extraction system, it must be possible to trigger an alarm on the main evacuation level by a smoke vent button and initiate the smoke extraction. In accordance with the current requirement of the Model Building Code (MBO - 2013), it must be possible to operate a lift shaft smoke extraction from at least one suitable location.
Alarm notifications: flashing lights, alarm sirens or fire bells Whether acoustic or visual signals: We manage an extensive program of different signal emitters.
6
Sensor system: timers, control keys, weather sensors Additionally, we manage a large selection of different buttons and key switches for manual ventilation requirements, but also automatic intelligent sensor systems, such as external temperature sensors and timers. As an option, the ventilation function can also be supplemented with the use of rain or wind sensors and a wind direction-dependent controller.
CLOSURE FLAPS
BlueKit® Stopping heat losses effectively using BK-Factory closure flaps Closure flaps prevent the uncontrolled escape of heat and energy through permanent openings. The installed flaps ensure effective ventilation regulation as well as safe smoke extraction if necessary. This requires that the functionality of the system will also be ensured under inclement weather conditions (storm, rain, snow or extreme temperatures). DIN EN 12101-2 / Specification for natural smoke and heat exhaust ventilators, is available as testing basis. The dimensions of the smoke exhaust vents are regulated by the individual state building codes and the requirements of the lift standards. The location of the smoke exhaust vents must be selected so that the smoke exhaust is not affected by the influence of wind (MBO / LBO).
ZVEI / VDMA guideline
We offer a large variety of options for implementing the aforementioned requirements:
Roof cap for installation on the flat roof of buildings The element was developed specifically for the exhaust of combustion gases and for ventilation purposes. The roof cap meets the requirement of the «inclement weather ventilation“ as well as a safe smoke exit without being impacted by wind. A louvre window is integrated in the base as a closure element.
For detailed information, please see the guideline «Installation and operation of smoke exhaust, ventilation and heat exhaust of lift shafts and machine rooms» from the VDMA / ZVEI as well as leaflet 2895 from the VdS.
The roof cap is available in three sizes: • 0.10 m²: 450 x 450 mm • 0.20 m²: 600 x 600 mm • 0.39 m²: 800 x 800 mm
Louvre windows specifically for vertical installation in the side walls
» Currently undergoing system testing in accordance with DIN EN 12101-2
The louvre elements consist of an anodised sheet metal with an insulation core of 21 mm.
The louvre windows are available in three standard sizes: •
0.10 m²: 420 x 420 mm
•
0.20 m²: 570 x 570 mm
•
0.39 m²: 775 x 775 mm
Different sizes are available upon request! » System-tested in accordance with DIN EN 12101-2 » Approval in accordance with VdS 2895
Blinds particurarly for retrofitting in the existing buildings The external cover of the smoke extraction opening is done in the form of a weatherproof cap or a laterally installed weather protection grille. The blinds are available in three standard sizes: •
0.10 m²: 360 x 360 mm
•
0.23 m²: 530 x 530 mm
•
0.41 m²: 700 x 700 mm
Different sizes are available upon request! » System-tested in accordance with DIN EN 12101-2 » Approval in accordance with VdS 2895
7
FURTHER INFORMATION
w w w.bluekit .eu
INTELLIGENT LIFT SHAFT SYSTEMS EUROPE-WIDE AVAILABLE