Carbitool router bit catalogue c&l pd by C&L Tool Centre Pty Ltd

Ph: 07 - 3326 1500

Email: Sales@cltoolcentre.com

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Ph: 07 - 3326 1500

Email: Sales@cltoolcentre.com

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Company Statement: Our investment in new technology with C.N.C. (computerised numerical controlled) equipment ensures our commitment to AUSTRALIAN MANUFACTURE and ultimate control in developing the highest reputation for cutting tool quality. The combination of design and productive excellence means satisfaction when you order CARB-I-TOOL Router Bits. It is the aim of the company to employ its skills and resources towards the continuing needs and expectations of its customers, so as to maintain a reputation for excellence relating to the timely supply of competitive and affordable products. This is achieved through a commitment to ongoing quality improvement

CARBIDE GRINDING Australian Made ANCA MX7 and TGX-7 grinding machines with automatic loaders ensure Carb-I-Tool router bits are manufactured to exact tolerances with superior cutting edge sharpness

DIAMOND GRINDING Manufacture and servicing of PCD and CBN tools for the automotive, aerospace, woodworking and general engineering industries. This automatic CNC machine produces high cutting edge accuracy and surface finish as well as accurate repeatability

Carb-I-Tool (Aust.) Pty. Ltd. - new modern administration, warehouse and manufacturing plant at 10-12 Levanswell Road, Moorabbin, Victoria, 3189 Australia. Carb-I-Tool (Aust.) Pty. Ltd. - has an ongoing program to improve and update the product range, and therefore reserves the right to change specifications where necessary.

ROUTER BIT TERMINOLOGY Prefix Prefix Suffix Suffix Suffix Suffix

H - High Speed Steel T - Carbide Tipped or Solid Carbide A - Carbide Tip on Nose (Pilot Panel Bits) B - Ball Bearing Guide E/C - End Cutting M - Metric Size

Note: The last two numerical digits denote cutting size ie. Metric T 216 M = 16mm Dia. Imperial T 224 = 24/32 = 3/4”Dia.

Suffix Suffix Suffix Suffix Suffix

S 3/8 1/2 10mm 5/16

- Single Flute - 3/8”Diameter Shank - 1/2”Diameter Shank - 10 mm Diameter Shank - 5/16” Diameter Shank

A B Otherwise C 1/4” Diameter Shanks

Affix X - Long Series Router Bits. Not guaranteed against Breakage Affix XX - Extra Long Series Router Bits. Not guaranteed against Breakage

= Cutting Width = Flute Length = Overall Length. On router bits with bearings. Includes bearing and screw. E = Pilot Width or Bearing Width ID = Inside Diameter T = Wood Thickness G = Depth of Cut Bevel = Bevel R, R1, R2 = Radii

Established 1969

CONTENTS

ROUTER BIT ROUTER BIT WOOD PLASTICS ALUMINIUM DIAMETER CUTTING & NONLENGTH FERROUS METALS Max 38mm 38.1mm + Max 50mm 50.1mm + Max 63mm 63.1mm + Max 75mm

24 000 18 000 18 000 16 000 16 000 12 000 12 000

18 000 14 000 14 000 12 000 12 000 10 000 10 000

14 000 12 000 12 000 10 000 10 000 9 000 9 000

SPIRAL FLUTE WOOD ROUTERS

FEED RATE (M/MIN) BASED ON 1/2” DIAM. TOOL CUTTING 19MM STOCK AT 18000RPM. TOOL

HARD WOOD

SOFT COMPOSITES WOOD (MDF, ETC.)

1 Flute Compression 2 Flute Compression 3 Flute Compression 4 Flute Compression 4 Flute Combined Compression

3-15 10-25 12-35 12-35

3-15 10-30 12-40 12-40

3-12 10-15 15-30 15-40

25-45

25-50

2 Flute Standard Spiral 3 Flute Standard Sprial

5-10 5-12

5-11 5-13

5-11 5-11

3 Flute Roughing 3 Flute Chipbreaker 4 Flute Rougher/Finisher

15-25 12-35 20-45

15-25 12-40 20-45

12-25 15-30 25-50

Actual feed rates will be subject to the effect or variables such as workpiece and machine rigidity, type of material (hard/soft wood), collet condition, horsepower, top edge wear, etc. Best to start at a moderate feed rate and increase until desired finish is attained. For smaller diameter tools – reduce feed rate. For larger diameter tools – increase feed rate. RESHARPENING Tools can be returned to Carb-I-Tool or sent to your local service shop. WHEN USING A ROUTING MACHINE, PROTECTION AGAINST INJURY SHOULD ALWAYS BE USED. • • •

EAR MUFFS SAFETY GLASSES DUST MASK AND/OR EXTRACTION PROCEDURES

IMPORTANT Router bits turn clockwise in the free hand position and anticlockwise when inverted in a router table. Always feed your workpiece against the rotation. Work holding jigs should be used in these instances. Failure to do so may harm router bits or cause injury.

Premium Quality Router Bits Page

Aluminium Cutting Bits Allen Keys Arbors

4 Edge Band Trim Bits 36 Edge and Draw 36 Face Bits

Batten Mould Bits

25 Ball End Bits 15 Beading Bits (with bearing) 19, 20 Beading Bits (no bearing) 17, 18, 19 Bearings 22, 36, 42, 43 Bevel Trim Bits 12 Bull Nose Bits 23

Canoe Slat Bits

23 Chamfering Bits 22 Chipbreaker Spiral Bits 4 Classical Bits (no bearing) 17 Classical Bits (with bearing) 21 Collets 36 Combination Flush, Bevel, Trim 11, 12 Combination Flush, Drill, Trim 9, 11, 12 Combination Multi-Form Bits 26 Compression Bits 5 Core Box Bits 15, 16 Cove Bits 20, 21

Dish Cut Bits

18 Double Edge Radius Bits 25 Dovetail Bits 13 Drawer Pull Bits 13 Drawer Joint Bits 31 Drawing Line Bits 23 Drip Seal Groover Bits 13

4 - 36 Page

Face Moulding Bits

(architrave, sills, etc) 28, 29 Fibreglass Bits 6 Finger Joint Bits 30 Finishing Spiral Bits 5 Flush Trim Bits 10, 12 Foam Cutting Bits 4

Groove Forming Bits Gifkin Bits

12-14 13

Handrail Bits

Raised Panel Bits

37 38 - 42

23 Slot Mortise Bits 8 8 Slotting Cutters 9, 35 14 Solid Surface Bits 26, 27 Jointing Bits 31 Spiral Wood Bits (with bearing) 10 Kits 9, 36 Stair Handrail Bits 23 Laminate Trim Bits 10, 11, 12 Straight Bits 4, 5, 6, 7, 8 Lock Mortise Bits 8 Table Edge Bits 25 Leigh Bits 13 Tongue and Groove Bits 31 Mitre Lock Bits 31 37 Mortise Bits 8 Toy Wheel Cutters Traditional Classical Ogee Bits (no bearing) 17 (no bearing) 16 Traditioinal Classical Ogee Bits (with bearing) 17, 21 (with bearing) 24 Trim Saws 9 Palace Pattern Bits 18 T-Slot Bits 14 Panel Door Bits 32, 33 Vee Groove Bits 14, 15 Pilot Panel Bits 9 Veining Bits 15 Plastic Cutting Bits 4 31 Polystyrene Bits 4 Wavy Joint Bit Window Sash Provincial Bits 33 (with bearing) 16, 21 and Rail Bits Wood Boring Drills 37 Provincial Bits (no bearing) 18 Hinge Mortise Bits Hook Slot Bits

Wood Boring Drills Replaceable Insert Router Bits Diamond Tipped Tools (PCD) Saw Blades, Holesaws

Diamond Grinding Cup Wheels Diamond Coated Router Bits

Trade Blade Portable Range Bench Saw Range Hole

Holesaws - Wood Holesaws - Other

Handsaws Jigsaw and Reciprocating Saw Blades Econocut Router Bits and Kits Planer and Buzzer Blades Accessories

Page

33, 34 Rebating Bits 22 Regency Bits 30 Reed Bits 25 Replaceable Tip Bits 38-42 Roman Ogee Bits 24 Rougher/Finisher Spiral 4 Roughing Spiral Bits 4 Rounding Over Bits (no bearing) 18, 19 Rounding Over Bits (with bearing) 19 Round Nose Bits 15

Email: Sales@cltoolcentre.com

1. Always keep collet clean. Replace when worn. 80% of all tool breakage is directly traced to worn ‘ovalized’ collets. Resolve breakage by changing to a new collet. 2. Insert shank 19mm (3/4”) into collet. Holding only the upper edge of the shank by the lower portion of the collet will inevitably lead to Router Bit breakage, spindle nose wear, and collet bell-mouthing. 3. Tighten the collet securely. 4. Store your bits in a Plastic Pouch. Do not let them lay loose in your tool box. 5. Clean Ball Bearings with solvent, then submerge them in thin oil lubricant. 6. Have your tools serviced by a professional service shop. A properly sharpened tool is vital to the success, quality and profitability of your operation. Remove the tool for servicing whenever poor job finish or increased feed pressure indicates a dull cutting edge. Also remove the tool for servicing at the slightest sign of a chip or nick in the cutting edge. 7. We recommend the use of 12.7mm (1/2”) diameter shanks where possible, for more stability and less chatter. 8. Router Bits over 38mm (11/2”) in diameter should be used in bench or overhead machines. Ensure appropriate speeds, feeds and number of passes are used for bits over 50mm (2”) in diameter. Consult your machine manual, supplier and Router Speed Guide (below) for specific advice.

PAGE

Ph: 07 - 3326 1500

SAFETY TIPS & HELPFUL HINTS

Up to 26mm Up to 26mm 26.1-50mm 26.1-50mm 51.1-63mm 51.1-63mm 63.1-77mm

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

43 - 45 46 - 48 49 - 50 51 52 - 53

Carbide Tipped Holesaw Drill Countersink Bits

HSS and TCT Forstner Bits Adjustable Circle Cutter – Wood Auger Bits Drill Saws Hollow Mortise Chisels Rosette Cutters HSS Countersinks Plug Cutters Quick Change Chuck Contour Gauge Router Base Adapter Kit Rotary Rasps Drum Sanding Kit Step Gauge Router Table Mitre Gauge Adjustable Clamps

Expansion Drill Bits Wood Chisels Brad Point Drills Multi-Angle Drill Bits

Spade Bits Hinge Drill Bits Corner Chisel Step Drills Masonry Drill Bits Template Guide Kit Router Depth Gauge Mounted Points

Aluminium Insert Plate Bar Clamp / Spreader

Corner Clamps PVA Glue Diamond Saw Blade Diamond Points Adjustable Hole Saw – Ceramics

Safety Aids Wood Joining Biscuits

61 62

Glass and Tile Drills Sharpening Stones

Specialised Lubricants

63 64

58 59

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Established 1969

FOR PLASTICS

ROUTER BITS

Email: Sales@cltoolcentre.com

Premium Quality

STRAIGHT BITS FOR NON FERROUS METALS, C

SOLID CARBIDE S I N G L E F L UT E

For plastics including Bakelite, Acetate, Plexi, PVC, Nylon, etc. UP CUT PART No. TSPR 02 MS TSPR 03 MS TSPR 04 S TSPR 04 MS TSPR 06 S TSPR 08 S TXSPR 08 S

(ALUMINIUM, LAMINATES, ETC) For aluminium, laminates, etc. Down cut pushes chips below the work. Ideal for trimming laminates and through cutting. Up cuts are ideal for grooving, slotting and routing. SOLID CARBIDE – TWO FLUTE

DOWN CUT A

PART No.

in.

TSPL 02 MS TSPL 03 MS TSPL 04 S 1/8 TSPL 04 MS TSPL 06 S 3/16 TSPL 08 S 1/4 TXSPL 08 S 1/4

B mm 2 3 3.18 4 4.75 6.35 6.35

in.

C in. 1-1/2 1-1/2 1-1/2 2 2 2 3-5/32

mm 8 10 12.7 12 16 19 38.1

1/2 5/8 3/4 1-1/2

mm 38.1 38.1 38.1 50.8 50.8 50.8 80

SHANK mm 2 3 6.35 4 6.35 6.35 6.35

UP CUT PART No. TSR 8 TXSR 8 TSR 12 3/8 TSR 16 1/2

A in. 1/4

TSP08 SH

TSL 8 TXSL 8 TSL 12 3/8 TSL 16 1/2

A in. 1/4 1/4 3/8 1/2

B mm 6.35 6.35 9.53 12.7

in. mm in. 3/4 19 2-1/2 1 25.4 2-1/2 1 25.4 2-1/2 1-1/4 31.75 3

mm 63.5 63.5 63.5 76.2

ROUGHING SPIRAL BITS

For hard plastics and Aluminium PART No.

PART No.

WOOD CUTTING

A SOLID CARBIDE - SINGLE FLUTE

DOWN CUT

B mm 6.35

SOLID CARBIDE - THREE FLUTE

in. 3/4

mm 19

in. 2-1/2

mm 63.5

For increased feed rates to give fast routing of hard materials. C

B A

UP CUT

DOWN CUT

SOLID CARBIDE - SINGLE FLUTE - EDGE ROUND FOR PLASTIC

PART No.

For rounding the edge on plastic sheets or parts PART No. TSPER08S

A in. 1/4

B mm 6.35

in. 3/8

C mm 9.5

in. 2-1/2

Radius in. mm 1/4 6.35

mm 63.5

TSRR 8 TSRR 8 M TSRR 12 3/8 TSRR 10 M TSRR 12 M TSRR 16 1/2 TSRR 16 M TSRR 20 M

PART No.

A in. 1/4

TSLR 12 3/8

3/8

TSLR 16 1/2 TSLR 16 M

1/2

B mm 6.35 8 9.53 10 12 12.7 16 20

in. 3/4

mm in. 19.05 2-1/2 25 1 25.4 2-1/2 25 32 1-1/4 31.75 3 35 40

mm 63.5 63 63.5 75 75 76.2 92 104

SOLID CARBIDE - 2 FLUTE FOAM CUTTER

3 FLUTE CHIPBREAKER SPIRAL

Ph: 07 - 3326 1500

Ideal for cutting low density foam materials at high feed rates A

PART No.

in. 1/4 3/8

TSFHH08 TSFHH12 3/8

B mm 6.35 9.5

in. 2 2

SOLID CA RBIDE

C mm 50.4 50.4

in. 4 4

mm 101.6 101.6

UP CUT

SOLID CARBIDE - 3 FLUTE POLYSTYRENE BIT

For polystyrene PART No. TSF 8 TSF 12 3/8

A in. 1/4 3/8

B mm 6.35 9.5

in. 2-1/4 2-1/4

PART No.

C mm 57.1 57.1

in. 4 4

mm 101.6 101.6

SOLID CARBIDE – SINGLE “SPOON” FLUTE

NEW

DOWN CUT PART No.

TSRCB 12 3/8 TSLCB 12 3/8 TXSRCB 16 1/2 TXSLCB 16 1/2 TSRCB 16 M TSLCB 16 M

A in. 3/8 1/2

B mm 9.5 12.7 16

in. 1-1/4 1-3/4

C mm 31.8 44.4 41

in. 3 3-5/8

mm 76.2 92 92

4 FLUTE ROUGHER FINISHER

For aluminium and some soft plastics. C

The chipbreaker grind is staggered on each flute which produces small chips and leaves a clean cut at high feed rates as well as minimising vibration. For hardwoods and dense materials.

SOLID CA RBIDE

B A

PART No.

•

TSP 04 S TSP 04 MS TSP 06 S TSP 06 MS TSP 08 S

A in. 1/8 5/32 3/16 15/64 1/4

B mm 3.18 4 4.75 6 6.35

in. 5/16 1/2 1/2 5/8 5/8

UP CUT

C mm 7.94 12.7 12.7 16 16

in. 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4

mm 57.1 57.15 57.15 57.15 57.15

PART No.

DOWN CUT PART No.

T4SRRF 12 3/8 T4SLRF 12 3/8 T4SRRF 16 1/2 T4SLRF 16 1/2 T4XSRRF 16 1/2 T4XSLRF 16 1/2

A in. 3/8 1/2 1/2

B mm 9.5 12.7 12.7

in. mm in. 1-1/4 31.75 3 1-1/4 31.8 3 1-1/2 38 3-5/8

C mm 76.2 76.2 92

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

FINISHING SPIRALS FOR WOOD

COMPRESSION BITS

For superior edge finish on all types of material. Hardwoods, Softwoods, Laminates, Composites etc. Up cut brings the swarf up and out of the cut. Down cut drives the swarf down and out of the cut.

Compression (up/down) Spiral Bits - The geometry of these tools prevents the chipping and furring on the top and bottom surfaces of the material being cut. Ideal for cutting double sided laminates (melamine, vinyl, spray coatings, painted board etc.) as well as natural timbers. 3 and 4 flute tools allow for increased high speed machining with high spindle speeds.

SUFFIX 1/2 = 1/2” SHANK, SUFFIX 5/16”= 5/16” SHANK, SUFFIX 3/8 = 3/8” SHANK, OTHERWISE 1/4” SUFFIX M = SHANK DIAM. SAME AS CUTTING DIAM.

SUFFIX E = Extra long flute FOR COMPRESSION BITS, SHANK DIAMETERS ARE THE SAME AS ‘A’ DIMENSION

B UNCOATED

TiN COATED

2 FLUTE FINISHING SPIRAL UP CUT DOWN CUT PART No. TSRW 4 TSRW 5 TSRW 6 TSSRW 8 TSRW 8 TXSRW 8 TSRW 10 5/16 TSRW 10 1/2 TSRW 8 M TSRW 12 3/8 TSRW 12 1/2 TSRW 10 M TSRW 12 M TSRW 16 1/2 TXSRW 16 1/2 TXXSRW 16 1/2 TSRW 16 M TSRW 20 M

PART No.

in. 1/8 5/32 3/16 1/4 1/4 1/4 5/16 5/16

TSLW 4 TSLW 5 TSLW 6 TSLW 8 TXSLW 8 TSLW 10 5/16 TSLW 10 1/2 TSLW 8 M TSLW 12 3/8 TSLW 12 1/2 TSLW 10 M TSLW 12 M TSLW 16 1/2 TXSLW 16 1/2 TXXSLW 16 1/2 TSLW 16 M TSLW 20 M

3/8 3/8

1/2 1/2 1/2

mm in. mm 3.18 1/2 12.7 3.96 5/8 16 4.75 3/4 19 6.35 5/8 16 6.35 3/4 19 6.35 1 25.4 7.94 1 25.4 7.94 1 25.4 8 25 9.53 1 25.4 9.53 1 25.4 10 25 12 32 12.7 1-1/4 31.8 12.7 1-1/4 38.1 12.7 2 50.8 16 35 20 40

in. 2-1/4 2-1/4 2-1/4 2 2-1/2 2-1/2 2-1/2 3

mm 57.15 57.15 57.15 50.8 63.5 63.5 63.5 76.2 63 2-1/2 63.5 3 76.2 75 75 3 76.2 4 101.6 4 101.6 92 104

Available, ex-stock with Titanium Nitride (TiN) coating. When ordering add a “T” to the required part number. e.g. TSRW8 is TTSRW8 (TiN Coated). FOR SPIRAL BITS WITH BEARI BEARINGS SEE PAGE 11 3 FLUTE FINISHING SPIRAL

Produces extremely smooth finishes. Use for natural timber and composites. UP CUT

DOWN CUT

PART No. T3SRW8 T3SRW 12 3/8 T3SRW 16 1/2

PART No.

in. 1/4 3/8 1/2

T3SLW8 T3SLW 12 3/8 T3SLW 16 1/2

B mm in. 6.35 3/4 9.5 1-1/4 12.7 1-1/4

C mm 19 31.8 31.8

in. 2-1/2 3 3

mm 63 76 76

SPIRAL BIT WITH BALL END

Used for round bottom work where extra depth and a superior finish is required. PART No. TSRWB 8 TSRWB 12 3/8 TSRWB 16 1/2

A in. 1/4 3/8 1/2

B mm in. mm 6.35 3/4 19 9.5 1 25.4 12.7 1-1/4 31.8

C in. 2-1/2 3 3

R RADIUS mm 63.5 76.2 76.2

in. 1/8 3/16 1/4

mm 25.4 25 32 31.8 35 40

in. 3

mm. 3.2 4.8 6.35

SINGLE FLUTE COMPRESSION PART No. TSRM 12 3/8 TSRM 10 M TSRM 12 M TSRM 16 1/2 TSRM 16 M TSRM 20 M

A in. 3/8

1/2

B mm 9.53 10 12 12.7 16 20

in. 1

1-1/4

mm 76.2 75 83 76.2 92 104

2 FLUTE COMPRESSION A PART No. in. mm T2ESRM08 1/4 6.35 T2ESRM8M 8 T2ESRM12 3/8 3/8 9.5 T2ESRM10M 10 T2SRM16 1/2 1/2 12.7 T2XSRM16 1/2 1/2 12.7

B in. 7/8

B1 mm 22.2 25 28 28 25.4 35

1-1/8 1 1-3/8

in.

ROUTER BITS

SOLID CARBIDE – SPIRAL TOOLING

C mm 8 8 8 8 10 10

in. 2-1/2

mm 63.5 63 76 75 76 92

3 3 3-5/8

2 FLUTE COMPRESSION FOR MORTISING (Short Upcut) A B B1 C PART No. in. mm in. mm in. mm in. mm T2SRM08 Q 1/4 6.35 7/8 22.2 5 2-1/2 63.5 T2SRM8M Q 8 25 5 63 T2SRM12 3/8 Q 3/8 9.5 7/8 22.2 5 3 76 T2SRM10M Q 10 22.2 5 75 T2SRM16 1/2 Q 1/2 12.7 1 25.4 6.35 3 76 T2XESRM16 1/2 Q 1/2 12.7 1-5/8 41.3 6.35 3-5/8 92

3 FLUTE COMPRESSION A PART No. in. mm T3ESRM12 3/8 3/8 9.5 T3ESRM10M 10 T3SRM16 1/2 1/2 12.7 T3XSRM16 1/2 1/2 12.7

B in. 1-1/8

B1 mm 28.6 28 25.4 35

1 1-3/8

in.

C mm 8 8 10 10

in. 3

mm 76 75 76 92

3 3-5/8

3 FLUTE COMPRESSION FOR MORTISING (Short Upcut) A B B1 C PART No. in. mm in. mm in. mm in. T3SRM12 3/8 Q 3/8 9.5 7/8 22.2 5 3 T3SRM10M Q 10 22.2 5 T3SRM16 1/2 Q 1/2 12.7 1 25.4 6.35 3 T3XESRM16 1/2 Q 1/2 12.7 1-5/8 41 6.35 3-5/8

mm 76 75 76 92

4 FLUTE COMPRESSION A PART No. in. mm T4SRM16 1/2 1/2 12.7 T4XSRM16 1/2 1/2 12.7

mm 76 92

B in. 1 1-3/8

B1 mm 25.4 35

in.

C mm 10 10

in. 3 3-5/8

4 FLUTE COMPRESSION FOR MORTISING (Short Upcut) A B B1 C PART No. in. mm in. mm in. mm in. mm T4SRM16 1/2 Q 1/2 12.7 1 25.4 6.35 3 76 T4XESRM16 1/2 Q 1/2 12.7 1-5/8 41 6.35 3-5/8 92 4 FLUTE COMBINED ROUGHER/FINISHER COMPRESSION A B B1 C PART No. in. mm in. mm in. mm in. mm T4SRMRF 16 1/2 1/2 12.7 1 25.4 10 3 76 T4XSRMRF16 1/2 1/2 12.7 1-3/8 35 10 3-5/8 92 T4XESRMRF16 1/2 1/2 12.7 1-3/4 44.4 10 3-5/8 92 4 FLUTE COMBINED ROUGHER/FINISHER COMPRESSION

(Short Upcut)

PART No. T4SRMRF 10M Q

A in.

B mm 10

in.

B1 mm 22.2

in.

Email: Sales@cltoolcentre.com

Premium Quality

STRAIGHT BITS

Ph: 07 - 3326 1500

Established 1969

C mm 5

in.

mm 75

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Established 1969

ROUTER BITS

Email: Sales@cltoolcentre.com

Premium Quality

STRAIGHT BITS These bits are used for routing highly abrasive materials such as glass epoxy and fibreglass.

FIBREGLASS BITS

FIBREGLASS BIT WITH PILOT

Can be used for plunge routing due to the end cutting capability.

Used for trimming fibreglass sheets. Pilot enables the tool to run on frames.

SUFFIX 1/2 = 1/2” SHANK, SUFFIX 3/8 = 3/8” SHANK, OTHERWISE 1/4” A B

C SOLID CARBIDE - DIAM OND CUT

PART No. TG 8 TG 8 E/C TG 12 3/8 TG 12 3/8 E/C TG 16 1/2 TG 16 1/2 E/C

SOLID CARBIDE - DIAM OND CUT

A in. 1/4 1/4 3/8 3/8 1/2 1/2

B mm 6.35 6.35 9.5 9.5 12.7 12.7

in. 3/4 3/4 1 1 1 1

C mm 19 19 25.4 25.4 25.4 25.4

in. 2 2 2-1/2 2-1/2 3 3

PART No.

mm 50.8 50.8 63.5 63.5 76 76

TG 8 P TG 12 3/8 P TG 16 1/2 P

A in. 1/4 3/8 1/2

B mm 6.35 9.5 12.7

in. 3/4 3/4 7/8

C mm 19 19 22

in. 2-1/2 3

mm 63 83 76

STRAIGHT BITS - STRAIGHT FLUTE HIGH SPEED STEEL

SOLID CARBIDE

SINGLE FLUTE

For all general purpose routing and grooving. Has the added advantage of chip clearance plus ease of sharpening by hand by workers with limited grinding experience. Can be used to rout aluminium, zinc, copper and other soft metals.

Ph: 07 - 3326 1500

H 204S H 205S H 204MS H 206S H 205MS H 208S

B mm 3.2 4 4 4.8 5 6.35

in. 3/8 5/16 5/16 7/16 7/16 3/4

in. 1-5/8 2 2 1-3/4 1-3/4 2

mm 41 50.8 50.8 44.4 44.4 50.8

TWO FLUTES

For general purpose routing, grooving, and rebating. HIGH SPEED STEEL

6.35 mm (1/4”) SHANK PART No. H 208 HX 208 H 210 H 212 H 214 H 216 H 213M H 220 H 216M H 219M H 224

A in. 1/4 1/4 5/16 3/8 7/16 1/2 33/64 5/8 5/8 3/4 3/4

B mm 6.35 6.35 7.9 9.5 11.1 12.7 13 15.9 16 19 19

in. 5/8 1-1/8 3/4 3/4 3/4 3/4 3/4 5/8 5/8 5/8 5/8

PART No. T 202 S T 202 MS T 203 S T 203 MS T 204 S T 205 S T 204 MS T 206 S T 205 MS T 207 S T 206 MS T 208 S

in. 1-5/8 2-3/8 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4

A in. 1/16 5/64 3/32 1/8 5/32 5/32 3/16 7/32 15/64 1/4

B mm 1.6 2 2.4 3 3.2 4 4 4.8 5 5.5 6 6.35

in. 3/16 3/16 3/16 1/4 5/16 3/8 7/16 1/2 1/2 1/2 5/8 5/8

C mm 4.8 4.8 4.8 6.35 7.9 9.5 11.1 12.7 12.7 12.7 15.9 15.9

in. 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2

mm 41 60 44.4 44.4 44.4 44.4 44.4 44.4 44.4 44.4 44.4

LONG SERIES SINGLE FLUTE * For maximum rigidity use the standard length bits (above) where possible.

B SOLID CA RBIDE

6.35 mm (1/4”) SHANK PART No.

HIGH SPEED STEEL

12.7 mm (1/2”) SHANK PART No. H 1412 H 1416

A in. 3/8 1/2

B mm 9.5 12.7

in. 1 1-1/4

C mm 25.4 31.8

in. 2-3/4 2-3/4

mm 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1

SOLID CARBIDE

C mm 15.9 28.6 19 19 19 19 19 15.9 15.9 15.9 15.9

6.35 mm (1/4”) SHANK

C mm 9.5 7.9 7.9 11.1 11.1 19

B SOLID CA RBIDE

6.35 mm (1/4”) SHANK in. 1/8 5/32 5/32 3/16 1/4

HIGH SPEED STEEL

PART No.

For all general purpose routing and grooving. Has the added advantage of chip clearance.

mm 70 70

T 1804 S T 1804 MS T 1806 S T 1805 MS T 1806 MS T 1808 S

A in. 1/8 5/32 3/16 15/64 1/4

B mm 3.2 4 4.8 5 6 6.35

in. 1/2 5/8 3/4 3/4 1 1

C mm 12.7 15.9 19 19 25.4 25.4

in. 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4

mm 57.1 57.1 57.1 57.1 57.1 57.1

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599 Premium Quality

STRAIGHT BITS TWO FLUTE

TWO FLUTE

For all general purpose routing, grooving, rebating. For longer life in routing abrasive type materials.

SOLID CARBIDE INSERT

12.7 mm (1/2”) SHANK C PART No.

SOLID CARBIDE

6.35 mm (1/4”) SHANK

T 206 M TX 206 M T 208 TX 208 TXX 208

A in. 15/64 15/64 1/4 1/4 1/4

B mm 6 6 6.35 6.35 6.35

in. 5/8 1-1/8 5/8 1-1/8 1-1/8

C mm 16 28.6 15.9 28.6 28.6

in. 1-1/2 2-1/4 1-1/2 2-1/4 2-1/2

mm 19 19 19 19 25.4 19 19 25.4 19 25.4 19 19 19 19 25.4 19 25.4 19 19 19 19 25.4 19 25.4 19 19 19 19 25.4 19 19 19 19 19 19 19 19 19 19 19

in. 1-3/4 1-3/4 1-3/4 1-3/4 2 1-3/4 1-3/4 2 1-3/4 2 1-3/4 1-3/4 1-3/4 1-3/4 2 1-3/4 2 1-3/4 1-3/4 1-3/4 1-3/4 2 1-3/4 2 1-3/4 1-3/4 1-3/4 1-3/4 2 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4 1-3/4

mm 38.1 57.1 38.1 57.1 63.5

CARBIDE TIPPED

6.35 mm (1/4”) SHANK PART No. T 207 M T 209 T 210 T 208 M TX 208 M T 209 M T 212 TX 212 T 210 M TX 210 M T 211 M T 214 T 212 M T 216 TX 216 T 213 M TX 213 M T 214 M T 218 T 215 M T 220 TX 220 T 216 M TX 216 M T 216.5 M T 217 M T 222 T 218 M TX 218 M T 218.5 M T 219 M T 224 T 219.5 M T 220 M T 226 T 221 M T 222 M T 228 T 225 M T 232

A in. 9/32 5/16 5/16 5/16 23/64 3/8 3/8 25/64 25/64 7/16 7/16 15/32 1/2 1/2 33/64 33/64 35/64 9/16 19/32 5/8 5/8 5/8 5/8 21/32 43/64 11/16 45/64 45/64 3/4 3/4 49/64 13/16 53/64 7/8 63/64 1

B mm 7 7.1 7.9 8 8 9 9.5 9.5 10 10 11 11.1 12 12.7 12.7 13 13 14 14.3 15 15.9 15.9 16 16 16.5 17 17.5 18 18 18.5 19 19 19.5 20 20.6 21 22 22.2 25 25.4

in. 3/4 3/4 3/4 3/4 1 3/4 3/4 1 3/4 1 3/4 3/4 3/4 3/4 1 3/4 1 3/4 3/4 3/4 3/4 1 3/4 1 3/4 3/4 3/4 3/4 1 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4

C mm 44.4 44.4 44.4 44.4 50.8 44.4 44.4 50.8 44.4 50.8 44.4 44.4 44.4 44.4 50.8 44.4 50.8 44.4 44.4 44.4 44.4 50.8 44.4 50.8 44.4 44.4 44.4 44.4 50.8 44.4 44.4 44.4 44.4 44.4 44.4 44.4 44.4 44.4 44.4 44.4

SINGLE FLUTE

T 1406 M T 1408 T 1410 T 1408 M

A in. 15/64 1/4 5/16 5/16

B mm 6 6.35 7.9 8

in. 5/8 5/8 3/4 3/4

C mm 15.9 15.9 19 19

in. 2-3/4 2-3/4 2-7/8 2-7/8

mm 25.4 25.4 25.4 25.4 25.4 25.4 31.8 31.8 50.8 31.8 50.8 31.8 31.8 38.1 38.1 50.8 38.1 50.8 38.1 38.1 38.1 38.1 50.8 38.1 38.1 50.8 38.1 50.8 38.1 38.1 38.1 38.1 38.1 38.1 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8

in. 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4 3 3 3-3/4 3 3-3/4 3 3 3-1/4 3-1/4 3-3/4 3-1/4 3-3/4 3-1/4 3-1/4 3-1/4 3-1/4 3-3/4 3-1/4 3-1/4 3-3/4 3-1/4 3-3/4 3-1/4 3-1/4 3-1/4 3-1/4 3-1/4 3-1/4 3 3 3 3 3 3 3 3

mm 70 70 73 73

CARBIDE TIPPED

12.7 mm (1/2”) SHANK PART No. T 1409 M T 1412 T 1410 M T 1411 M T 1414 T 1412 M TX 1412 M T 1416 TX 1416 T 1413 M TX 1413 M T 1414 M T 1418 T 1415 M T 1420 TX 1420 T 1416 M TX 1416 M T 1416.5 M T 1417 M T 1422 T 1418 M TX 1418 M T 1418.5 M T 1419 M TX 1419 M T 1424 TX 1424 T 1419.5 M T 1420 M T 1426 T 1428 T 1425 M T 1432 T 1436 T 1432 M T 1435 M T 1448 T 1452 T 1456 T 1460 T 1464

A in. 23/64 3/8 25/64 7/16 7/16 15/32 15/32 1/2 1/2 33/64 33/64 35/64 9/16 19/32 5/8 5/8 5/8 5/8 21/32 43/64 11/16 45/64 45/64 3/4 3/4 3/4 3/4 49/64 13/16 7/8 63/64 1 1-1/8 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2

B mm 9 9.5 10 11 11.1 12 12 12.7 12.7 13 13 14 14.3 15 15.9 15.9 16 16 16.5 17 17.5 18 18 18.5 19 19 19 19 19.5 20 20.6 22.2 25 25.4 28.6 32 35 38.1 41.3 44.4 47.6 50.8

in. 1 1 1 1 1 1 1-1/4 1-1/4 2 1-1/4 2 1-1/4 1-1/4 1-1/2 1-1/2 2 1-1/2 2 1-1/2 1-1/2 1-1/2 1-1/2 2 1-1/2 1-1/2 2 1-1/2 2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4

C mm 70 70 70 70 70 70 76 76 95 76 95 76 76 82 82 95 82 95 82 82 82 82 95 82 82 95 82 95 82 82 82 82 82 82 76 76 76 76 76 76 76 76

STRAIGHT BIT WITH DOWN SHEAR

Reduces top edge breakout. Ideal for veneered and laminated boards.

CARBIDE TIPPED

12.7 mm (1/2”) SHANK PART No. T 1410 MS T 1413 MS T 1416 MS

A in. 25/64 33/64 5/8

B mm 10 13 16

in. 1 1-1/2 1-1/2

C mm 25.4 38.1 38.1

in. 2-5/8 3-5/32 3-5/32

Ph: 07 - 3326 1500

PART No.

ROUTER BITS

SOLID CARBIDE & CARBIDE TIPPED

mm 67 80.2 80.2

PART No. TSH 1424 TSHX 1424

A in. 3/4 3/4

B mm 19 19

in. 1-1/2 1-61/64

C mm 38.1 50

in. 3-1/4 3-23/37

Email: Sales@cltoolcentre.com

Established 1969

mm 82 94.5

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Established 1969

END VIEW

END CUTTING

ROUTER BITS

Email: Sales@cltoolcentre.com

Premium Quality

STRAIGHT BITS HINGE MORTISE BITS

For plunge cutting deep or repetitive holes in addition to normal groove, trim and rebate routing.

Can be used as a fast cutting stair tread bit or making mortises from edge of work. B

CARBIDE TIPPED - TWO FLUTE

12.7 mm (1/2”) SHANK PART No. T 1410M E/C T 1413M E/C T 1416M E/C T 1418M E/C T 1419M E/C T 1425M E/C T 1432M E/C

A in. 25/64 33/64 5/8 45/64 3/4 63/64 -

B mm 10 13 16 18 19 25 32

A in. 1 1-1/4 1-1/2 1-1/2 1-1/2 1-1/2 1-1/4

TWO FLUTE

mm 25.4 31.8 38.1 38.1 38.1 38.1 31.8

in. 2-3/4 3 3-1/4 3-1/4 3-1/4 3-1/4 3

6.35 mm (1/4”) SHANK

PART No.

mm 70 76 82 82 82 82 76

in.

B mm

in.

C mm

H 2016

1/2

HIGH SPEED STEEL 12.7 13/32 10.3

T 2016

1/2

CARBIDE TIPPED 12.7 13/32 10.3

12.7 mm (1/2”) SHANK

RIP & SLOTTER BIT

PART No.

in.

A slotting and fast cutting roughing bit. C B SOLID CARBIDE - SINGLE FLUTE

T 803 - 509

A in. 1/4

B mm 6.35

in.

CARBIDE TIPPED 17.5 3/4 19 3/4 20.6 3/4 22.2 3/4

11/16 3/4 13/16 7/8

C mm

in.

19 19 19 19

2-1/2 2-1/2 2-1/2 2-1/2

63.5 63.5 63.5 63.5

6.35 mm (1/4”) SHANK PART No.

T 1622 1/2 T 1624 1/2 T 1626 1/2 T 1628 1/2

B mm

in. 3/8

FOR SCHEER ROUTERS

C mm 9.5

in. 1-1/2

mm 38.1

SLOT MORTISE BITS

A long series bit for slot mortise joints. Note: Due to the extreme length of these bits they should be used in a table mounted routing machine only. These bits are not guaranteed against breakage.

Ph: 07 - 3326 1500

B TWO FLUTE END CUTTING WITH CHIP BREAKER

A in.

TSM 1408 M TSM 1409.5M

5/16 3/8

TSM 1413 M

33/64

10 mm INTERNAL THREAD

mm in. mm SOLID CARBIDE INSERT 8 1-1/2 38.1 9.5 1-1/2 38.1 CARBIDE TIPPED 13 2 50.8

in.

3-5/8 3-5/8

92 92

3-3/4

PART No.

in.

12.7 mm (1/2”) SHANK PART No.

CARBIDE TIPPED - TWO FLUTE

TFRNA 8

1/4

TFRNA 12 TFRNA 16 TFRNA 20 TFRNA 24

3/8 1/2 5/8 3/4

B mm

in.

C mm

SOLID CARBIDE INSERT 6.35 5/8 15.9 CARBIDE TIPPED 9.5 3/4 12.7 3/4 16 1-1/4 19 1-1/4

19 19 31.8 31.8

in.

2-3/16

2-3/16 2-3/16 2-3/8 2-3/8

55 55 60 60

LOCK MORTISE CUTTERS Standard bits have a 12/32 NEF thread to suit the Stanley machine. Bits marked UNF fit the Porter Cable machine. Extension Arbors (96mm Long) are available to suit both NEF and UNF threads TA 22 for NEF TA 24 for UNF NEW (see page 36)

A B

STAGGERED TIP BITS

A fast cutting roughing bit for heavy stock removal. B CARBIDE TIPPED

PART No.

• 8

TLM 10 TLM 12 TLM 12 UNF TLM 13 UNF TLM 14 TLM 14 UNF TLM 16 TLM 16 UNF

A in. 5/8 3/4 3/4 13/16 7/8 7/8 1 1

B mm 15.9 19 19 20.6 22.2 22.2 25.4 25.4

12.7 mm (1/2”) SHANK

CARBIDE TIPPED - TWO FLUTE

in. 3/4 3/4 .590 .590 1 .590 1 .590

mm 19 19 15 15 25.4 15 25.4 15

THREAD 12/32 NEF 12/32 NEF 1/4 UNF 1/4 UNF 12/32 NEF 1/4 UNF 12/32 NEF 1/4 UNF

PART No.

A in.

TST 1409.5 M

3/8

TST 1413 M TSTX 1413 M

33/64 33/64

B mm

in.

C mm

in.

SOLID CARBIDE INSERT 9.5 1-1/2 38.1

3-5/8

CARBIDE TIPPED 13 1-3/4 44.5 13 2-1/4 57.1

3-1/2 4

89 102

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

TRIM SAWS SLOTTING CUTTER ASSEMBLIES

For edge trimming of laminated sink tops. C B

6.35 mm (1/4”) SHANK A in.

SOLID CARBIDE CUTTER TWELVE TEETH

6.35 mm (1/4”) SHANK PART No.

CARBIDE TIPPED - WITH PILOT

PART No

Solid carbide cutters give great rigidity for thin slotting cuts.

B mm

in.

TA 900 1.2M TA 900 1.6M TA 900 1.2M TA 900 1.6M

C mm

in.

2-3/8

A in. 1-1/4 1-1/4 1-1/4 1-1/4

B mm 31.8 31.8 31.8 31.8

in. 3/64 1/16 3/64 1/16

mm 1.2 1.6 1.2 1.6

in. 1-5/8 1-5/8

ARBOR No. mm 41 TA 11 41 TA 11 Cutter only Cutter only

ROUTER BITS

FLUSH TRIMMING BITS

Premium Quality

P I L O T PA N E L B I T S

SINGLE FLUTE CARBIDE TIPPED T 1910

5/16

T 1910 2

5/16

13/16

20.6

TWO FLUTES CARBIDE TIPPED 8

13/16

20.6

SLOTTING CUTTER ASSEMBLIES

COMBINATION FLUSH TRIMMING & DRILLING BITS

C B

SOLID CARBIDE CUTTER TWELVE TEETH with ball bearing Guide

9.4mm

6.35 mm (1/4”) SHANK

This bit drills its own hole for blind routing in plywood and soft metals. Eliminates fitting edges at window and floor openings.

PART No. TA 900 1.2MB TA 900 1.6MB

A in. 1-1/4 1-1/4

B mm 31.8 31.8

in. 3/64 1/16

C mm 1.2 1.6

in. 2-3/32 2-3/32

mm 53 53

A ARBOR No. TA 10 TA 10

Replacement Ball Bearing TB11

WITH PILOT

PART No

A in.

B mm

in.

KITS

A C

in.

2-3/8 2-5/8 3-5/8

60 67 92

2-1/2

63.5

2-61/64 3-3/16 3-5/8

75 81 92

2-3/4

SINGLE FLUTE HIGH SPEED STEEL H 1508 H 1512 3/8 H 1516 1/2

1/4 3/8 1/2

T 1508

1/4

6.35 9.5 12.7

3/4 7/8 1-1/8

19 22.2 28.6

SINGLE FLUTE SOLID CARBIDE 6.35

25/32

SINGLE FLUTE CARBIDE TIPPED T 1510 T 1512 3/8 T 1516 1/2

5/16 3/8 1/2

T 1510 2

5/16

8 9.5 12.7

13/16 1 1

20.6 25.4 25.4

SIX BIT STARTER ROUTER BIT SET HIGH SPEED STEEL PART No. H202-457 Set includes: 1-Router Bit Case 1-H112 1-H216 1-H416 1-H916 1-H508 1-H208 Supplied in handy Plastic Case. Case sold separately Part No. TCASE

TWO FLUTES CARBIDE TIPPED 8

13/16

20.6

THREE BIT LAMINATE TRIM SET

This bit is used extensively in the caravan repair and manufacturing industries for drilling and trimming sheet aluminium.

C B

SPIRAL DOWNCUT HIGH SPEED STEEL - WITH PILOT

SUFFIX 1/2 = 1/2” SHANK, SUFFIX 3/8 = 3/8”SHANK, OTHERWISE 1/4” PART No HSF 1508 HSF 1512 3/8 HSF 1516 1/2

B mm 6.35 9.5 12.7

CARBIDE TIPPED PART No. TRBS-1 Set includes: 1-T 192.22 B 1-T 192.00 B 1-T 208 S

A in. 1/4 3/8 1/2

Ph: 07 - 3326 1500

SUFFIX 1/2 = 1/2” SHANK, SUFFIX 3/8 = 3/8” SHANK, OTHERWISE 1/4”

in. 3/4 25/32 1-3/4

C mm 19 20 44.4

in. 2-3/4 3 4-1/2

Email: Sales@cltoolcentre.com

Established 1969

mm 70 76 115

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ROUTER BITS

Email: Sales@cltoolcentre.com

Premium Quality

Established 1969

L A M I N AT E T R I M B I T S & C U T T E R S FLUSH TRIMMING BITS A popular bit for fast smooth and accurate trimming cuts for laminates and template work.

PART No. T 8008 B T 8012 B TS 8012 B TS 8016 B T 8016 B T 8016 B 1/2 TX 8016 B 1/2 TXX 8016 B 1/2 T 8020 B T 8020 B 1/2 T 8028 B 1/2 TX 8028 B 1/2

in. 1/4 3/8 3/8 1/2 1/2 1/2 1/2 1/2 5/8 5/8 0.866 0.866

B mm 6.35 9.5 9.5 12.7 12.7 12.7 12.7 12.7 15.9 15.9 22 22

in. 1 1 1/2 5/8 1 1 1-1/2 2 1 1 1 1-1/2

C mm 25.4 25.4 12.7 15.9 25.4 25.4 38.1 50.8 25.4 25.4 25.4 38.1

in. 2-3/8 2-5/8 1-57/64 2-1/4 2-1/2 3-1/8 3-3/8 3-7/8 2-5/8 3-1/8 3-3/8 3-3/4

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

CARBIDE TIPPED - TWO FLUTE W I T H D O U BL E B A L L B E A RI N G G U I D E

CARBIDE TIPPED - TWO FLUTE W I T H B A LL B E A R I N G G U ID E

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

This bit has been specially designed for template work in softer timbers. Where a single bearing might create an indentation on the timber, this bit has double the surface area to ensure template surface is not damaged.

Bearing No. TB 6 TB 9 TB 9 TB 11 TB 11 TB 11 TB 11 TB 11 TB 14 TB 14 TB 12 TB 12

mm 60 63.5 48 57.1 67 79 86 98 67 79 86 95

PART No.

in. T 8012 BB 3/8 TS 8012 BB 3/8 TS 8016 BB 1/2 T 8016 BB 1/2 T 8016 BB 1/2 1/2 TX 8016 BB 1/2 1/2 TXX 8016 BB 1/2 1/2 T 8020 BB 5/8 T 8020 BB 1/2 5/8 T 8028 BB 1/2 0.866 TX 8028 BB 1/2 0.866

B mm 9.5 9.5 12.7 12.7 12.7 12.7 12.7 15.9 15.9 22 22

in. 1 1/2 5/8 1 1 1-1/2 2 1 1 1 1-1/2

C mm 25.4 12.7 15.9 25.4 25.4 38.1 50.8 25.4 25.4 25.4 38.1

in. 2-3/4 2-9/64 2-3/8 2-3/4 3-3/8 3-7/8 4-1/4 3 3-3/8 3-1/2 4-5/32

mm 70 54.5 60 70 86 98 108 76 86 89 105

Bearing No. TB 9 TB 9 TB 11 TB 11 TB 11 TB 11 TB 11 TB 14 TB 14 TB 12 TB 12

FLUSH TRIM BITS DUAL BEARING Designed for trimming and template work. The top, bottom or both bearings can be used for a variety of trimming applications.

Made with Polycrystalline Diamond (PCD) Tips. PCD Tips keep a sharp cutting edge many times longer than tungsten carbide tips. These bits are excellent for extremely hard laminates.

NEW

NEW Suffix 1/2 = 1/2” shank Otherwise 1/4” shank A

PART No. DIATR S 8012 B DIATR S 8016 B DIATR S 8016 B 1/2

Ph: 07 - 3326 1500

in. 3/8 1/2 1/2

B mm 9.5 12.7 12.7

in 1/2 5/8 5/8

C mm 12.7 15.9 15.9

in 2-3/32 2-7/32 2-13/16

mm 53.2 56.4 71.4

Bearing No. TB9 TB11 TB11

FLUSH TRIM BIT WITH DOWN SHEAR For minimal chipping and superior finish.

TSH 8024 B 1/2 TSHX 8024 B 1/2

in. 3/4 3/4

T 8216 DB T 8224 DB 1/2

in. 1/2 3/4

INVERTED FLUSH TRIMMING BITS

B mm in. 19 1-1/2 19 1-61/64

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

PART No.

mm 38.1 50

Bearing in. mm No. 3-39/64 91.7 TB 16 4 101.6 TB 16

OVERHANG TRIMMING BIT This bit will leave a 1/8” overhang in order that the final flush trimming cut is a light one for the smoothest possible finish.

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

PART No.

End Centre Bearing Bearing No. No. mm in mm in mm 12.7 1.0 25.4 2-3/4 69.9 TB 11 TB 7 19 1-1/2 38.1 4-11/64 105.9 TB 16 TB 4 B

A handy bit for copy work where the template is between the work and the router.

CARBIDE TIPPED

in. T 8212 B 3/8 T 8216 B 1/2 T 8220 B 5/8 T 8224 B 1/2 3/4 TX 8224 B 1/2 3/4 T 8236 B 1/2 1-1/8

Bearing No. mm in. mm in. mm TB 2 9.5 3/4 19 2-11/64 55 TB 7 12.7 3/4 19 2-11/64 55 TB 14 15.9 3/4 19 2-11/64 55 19 1-1/2 38.1 3-5/8 92.1 TB 4 19 2 50.8 4-5/32 105.6 TB 4 TB 18 28.6 1-1/2 38 3-1/3 89

Retaining Ring Circlip TZR 1 TZR 1 TZR 3 TZR 3 TZR 3

INVERTED FLUSH TRIM BIT with Down Shear CARBIDE TIPPED

B B

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

6.35 mm (1/4”) SHANK PART No. TO 8012 B

A in. 3/8

B mm 9.5

in. 1

PART No.

C mm 25.4

in. 2-3/4

Retaining Ring TZR 3

Replacement Ball Bearing TB8.

mm 70

TSH 8224 B 1/2 TSHX 8224 B 1/2

A in. 3/4 3/4

B mm 19 19

in. mm 1-1/2 38.1 1-61/64 50

C in. mm 3-39/64 91.7 4 101.6

Bearing No. TB 4 TB 4

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

H IGH PERFORMANCE PROFESSIONAL RANGE - 4 Flutes

SOLID CARBIDE

These tools produce a chatter-free trimmed edge. At high feed rates they produce a superior finish to any other tool. Assembly includes 4 flute cutter, arbor (1/4” or 1/2” shank), bearing, nut and washer.

UP CUT

DOWN CUT A in. mm

PART No

TSRW 12 BB 3/8 TSRW 16 BB 1/2 TXSRW 16 BB 1/2 TXXSRW 16 BB 1/2

TSLW 12 BB 3/8 TSLW 16 BB 1/2 TXSLW 16 BB 1/2 TXXSLW 16 BB 1/2

3/8 1/2 1/2 1/2

B in. mm

9.5 1 12.7 1 12.7 1 1/2 12.7 2

25.4 25.4 38.1 50.8

C in.

Bearing No. TB9 TB11 TB11 TB11

3 76.2 3 5/8 92.1 4 101.6 4 1/2 114.3

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

6.35 mm (1/4”) SHANK A

T 9122 B T 9130 B

B mm 19 22.2

in. 0.580 0.580

C mm 14.7 14.7

in. 2-3/16 2-3/16

mm 55 55

BEVEL

30 0 BEVEL TRIMMING BIT

6.35 mm (1/4”) SHANK

T 192.22 B T 192.30 B

in.

1/2 0.697 0.784

12.7 17.7 19.3

1/4 1/4 1/4

6.35 6.35 6.35

1-3/4 1-3/4 1-3/4

44.4 44.4 44.4

1 2 3

For extra smooth trimming. Assembly includes 3 flute cutter, bearing, arbor, spacers and nut.

6.35 mm (1/4”) SHANK TA 193.00 B TA 193.22 B

Arbor No.

Flush 22

TA 9 TA 9

C in. 2-3/8 2-3/8

REPLACEMENT TRIMMING CUTTERS

PART No. T 193.00 T 193.22

BEVEL Flush 220

mm 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5

PART No.

BEVEL

T 194.00 T 194.15 T 194.25 T 194.45

Flush 150 250 450

A in. .866 1 1-1/8 1-3/8

mm 22 25.4 28.6 35

DOUBLE FLUSH AND BEVEL TRIMMING ASSEMBLIES

Bevel

B CARBIDE TIPPED - FOUR FLUTES W I T H B A LL B E A R I N G G U ID E

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” PART No.

BEVEL Arbor No.

TDA 194.00 B TDA 194.00 B 1/2 TDA 194.15 B TDA 194.15 B 1/2 TDA 194.25 B TDA 194.25 B 1/2 TDA 194.45 B TDA 194.45 B 1/2

FLUSH FLUSH 150 150 250 250 450 450

TA 13 TA 14 TA 13 TA 14 TA 13 TA 14 TA 13 TA 14

B in. 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

C mm 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35

in. 3 3-1/4 3 3-1/4 3 3-1/4 3 3-1/4

mm 76 82 76 82 76 82 76 82

Replacement Ball Bearing TB12

FLUSH AND BEVEL TRIMMING ASSEMBLIESSOLID CARBIDE - THREE FLUTES WITH BALL BEARING GUIDE

BEVEL

TA 1 TA 3 TA 1 TA 3 TA 1 TA 3 TA 1 TA 3

in. 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2

Item

PROFESSIONAL RANGE - 3 Flutes

PART No.

Flush Flush 150 150 250 250 450 450

C mm 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35

A time saving bit that will trim both sides of the board in one pass. Washers provided enable cutters to be separated the correct distance to suit thickness of board to be trimmed.

Replacement Ball Bearing TB11.

T 192.00 B

CARBIDE TIPPED TWO FLUTES WITH BALL BEARING GUIDE

PART No.

TA 194.00 B TA 194.00 B 1/2 TA 194.15 B TA 194.15 B 1/2 TA 194.25 B TA 194.25 B 1/2 TA 194.45 B TA 194.45 B 1/2

B in. 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

8 mm (5/16”) BORE

22 BEVEL TRIMMING BIT

BEVEL Arbor No.

REPLACEMENT TRIMMING CUTTERS CARBIDE TIPPED - FOUR FLUTES

PART No.

Replacement Ball Bearing TB12 For oversize Bearing use TB13

220 300

HANDYMAN RANGE - 2 Flutes An effective range of trimming bits ideal for small routers.

22mm

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

A versatile bit with ball bearing guide. By adjusting the depth this bit will either flush trim or bevel trim.

in. 3/4 7/8

C B

FLUSH AND BEVEL TRIMMIN G ASSEMBLIES CARBIDE TIPPED - FOUR FLUTES W I T H B A LL B E A R I N G G U ID E

COMBINATION FLUSH & BEVEL TRIMMING BITS

PART No.

Bevel

mm 60 60

Replacement Ball Bearing TB14 For oversize Bearing use TB16

6.35 mm (1/4”) BORE A

in. 5/8 7/8

mm 15.9 22.2

REPLACEMENT LEFT HAND TRIMMING CUTTERS

8 mm (5/16”) BORE PART No. T 194.15 LH T 194.25 LH T 194.45 LH

BEVEL 150 250 450

A in. 1 1-1/8 1-3/8

Email: Sales@cltoolcentre.com

Ideal for template work where a superior finish is required.

ROUTER BITS

SPIRAL FLUTE BIT - WITH BEARING

Premium Quality

L A M I N AT E T R I M B I T S & C U T T E R S

Ph: 07 - 3326 1500

Established 1969

mm 25.4 28.6 35

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ROUTER BITS

Email: Sales@cltoolcentre.com

Premium Quality

Established 1969

L A M I N AT E T R I M B I T S & C U T T E R S COMBINATION FLUSH TRIMMING & DRILLING BIT

Drills through surface laminate into pre-cut opening and trims edge square in one operation.

A in. 1/4

CARBIDE TIPPED TWO FLUTES

B mm 6.35

in. 5/8

6.35 mm (1/4”) SHANK

C mm 16

in. 1-1/2

mm 38.1

C B

B mm 4.8

in. 1/2

mm 12.7

in. 1-1/2

mm 38.1

mm 15.9 15.9

in. 3/8 3/8

C mm 9.5 9.5

in. 1 1-3/8

mm 25.4 35

EDGE BAND TRIM BITS CARBIDE TIPPED

B C

B in. 3/8

in. 1-1/2

C mm 9.5

6.35 mm (1/4”) SHANK

Ph: 07 - 3326 1500

in. 5/8 5/8

SOLID CARBIDE S I N G L E F L UT E

mm 6.35

mm 41 51

PART No.

in. 1/4

in. 1-5/8 -

30˚ BEVEL TRIMMING BITS

TBD 30 TBDX 30

Provides 7° bevel or 0° square cut on the edge of plastic laminated surfaces.

T 2614

C mm 11 19

6.35 mm (1/4”) SHANK

COMBINATION FLUSH & 7˚ BEVEL TRIMMING BIT

PART No.

in. 7/16 3/4

CARBIDE TIPPED - TWO FLUTES

6.35 mm (1/4”) SHANK in. 3/16

mm 12 14.3

Provides a 30˚ bevel to trim the edge of plastic laminated surfaces.

SOLID CARBIDE - SINGLE FLUTE WITH PILOT

in. 15/32 9/16

T 2622 TX 2622

Provides 7° bevel to trim the edge of plastic laminated surfaces. Built-in pilot eliminates guide assembly.

T 403-501

PART No.

7˚ BEVEL TRIMMING BIT

PART No.

B A

6.35 mm (1/4”) SHANK T 703-507

Provides a 22˚ or 0˚ straight cut on the edge of plastic laminated surfaces.

SOLID CARBIDE SINGLE FLUTE WITH PILOT

PART No.

COMBINATION FLUSH & 22˚ BEVEL TRIMMING BITS

mm 38.1

COMBINATION FLUSH & 22˚ BEVEL TRIMMING BITS

PART No.

TLE 24 TLE 24 LH

TEG

TLE

Provides 22° bevel or 0° square cut on the edge of plastic laminated surfaces.

A in. 3/4 3/4

B mm 19.0 19.0

in. 31/64 31/64

mm 12.3 12.3

C in. mm 1-45/64 43.3 1-45/64 43.3

R RADIUS in. mm 5/64 2.0 5/64 2.0

15˚ BEVEL

PART No. SOLID CARBIDE - SINGLE FLUTE

TEG 15 TEG 15 LH

6.35 mm (1/4”) SHANK PART No. TBD 22 TBDX 22

A in. 1/4 1/4

B mm 6.35 6.35

in. 1/2 1/2

in. 1 1-1/2

mm 25.4 38.1

Makes square trim edge cuts. Has integral pilot

C B

SOLID CARBIDE SINGLE FLUTE WITH PILOT

T 303-500

in. 1/4

B mm 6.35

in. 1/4

in. 33/64 33/64

C mm 13.0 13.0

in. 1-1/2 1-1/2

mm 38.1 38.1

GROOVE FORMING BITS BROOKMAN DOVETAIL BIT A bit specially designed to be used in the Brookman dovetailing machine.

in. 1-1/2

3/8” B.S.F. EXTERNAL THREAD C

mm 6.35

CARBIDE TIPPED - TWO FLUTES

6.35 mm (1/4”) SHANK PART No.

B mm 32.0 32.0

C mm 12.7 12.7

FLUSH TRIMMING BIT

A in. 1-17/64 1-17/64

mm 38.1

PART No. T 100

A in. .520

B mm 13.2

in. 9/16

C mm 14.3

in. 2-1/4

mm 57.1

Bevel 10˚

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

DOVETAIL“LEIGH” BITS

For dovetail joint, drawer fronts, etc. for the quality minded

To suit the ‘Leigh’ Dovetail Jig.

ROUTER BITS

DOVETAIL BITS

Premium Quality

GROOVE FORMING BITS

C C

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

TWO FLUTE

B A

PART No.

in.

B mm

Bevel

C in.

Bevel

1-5/8 1-5/8 2

41 41 50.8

5˚ 15˚ 15˚

38.1

5˚

44.4 44.4 70 70 70 44.4 70

15˚ 15˚ 15˚ 15˚ 15˚ 15˚ 5˚

HIGH SPEED STEEL H 1012 H 1018 H 1018 1/2

9/32 9/16 9/16

7.1 14.3 14.3

T 1012

9/32

7.1

9.5 13.5 13.5

SOLID CARBIDE 9.5

1-1/2

1/2 9/16 9/16 9/16 9/16 19/32 3/4

12.7 14.3 14.3 14.3 14.3 15 19

13.5 13.5 13.5 13.5 13.5 12.7 26

1-3/4 1-3/4 2-3/4 2-3/4 2-3/4 1-3/4 2-3/4

in. 3/8 1/2 11/16 13/16 1/2 5/16 7/16 1/2

in. 1/2 13/16 1 1-1/4 1/2 1 1 1

mm 12.7 20.6 25.4 31.8 12.7 25.4 25.4 25.4

in. 2-3/8 2-3/4 2-7/8 3-1/8 2-3/8 2-7/8 3 3

Bevel

mm 60 70 73 79 60 73 76 76

8˚ 8˚ 8˚ 8˚ 14˚ 0˚ 0˚ 0˚

12.7mm (1/2”) SHANK PART No.

in. TDC 16 1/2 1-3/4 TDC 20 1/2 2 TDC 24 1/2 2-1/4 C

B mm 44.4 50.8 57.1

in. 1/2 9/16 3/4

C mm 12.7 14.3 19

in. 2-1/2 2-9/16 2-5/8

mm 63.5 65 67

R RADIUS in. mm 1/2 12.7 9/16 14.3 3/4 19

These bits produce a recessed handle on drawers or cupboard doors that is both decorative and functional.

CARBIDE TIPPED - TWO FLUTES

in. mm in. mm in. mm 3/8 9.5 33/64 13.0 2-1/2 63.5 5/8 15.9 22.0 2-5/16 84.0 3/8 9.5 33/64 13.0 2-31/64 63.0 1/2 12.7 22.0 3-5/16 84.0 .244 6.2 25/64 10 2-1/4 57.1 .433 11 25/64 10 2-1/4 57.1

Bevel 8˚ 8˚ 0˚ 0˚ 7˚ 0˚

Retaining Ring TZR 4 TZR 3 TZR 4 TZR 3 TZR 4 TZR 4

* Solid Carbide Replacement Ball Bearings

mm 9.5 12.7 17.4 20.6 12.7 8 11.1 12.7

A C

CARBIDE TIPPED - TWO FLUTES

To suit ‘Gifkins’ Dovetail Jig.

TGAD 12 TGBD 16 1/2 TGAS 12 TGBS 16 1/2 TGHD 12 * TGHS 12

These bits will produce a hidden handle on drawers and cupboard doors.

DOVETAIL “GIFKINS” BITS

PART No.

TL 70 TL 80 TL 90 1/2 TL 100 1/2 TL 120 TL 140 TL 150 1/2 TL 160 1/2

A A

DRAWER PULL BITS

CARBIDE TIPPED T 1016 T 1018 T 1018 3/8 T 1018 10MM T 1018 1/2 T 1019 T 1024 1/2

PART No.

Ph: 07 - 3326 1500

SUFFIX 1/2 = 1/2” SHANK, SUFFIX 3/8 = 3/8” SHANK, SUFFIX 10mm = 10mm SHANK, OTHERWISE 1/4”

CARBIDE TIPPED TWO FLUTES

1/4 Shank - TB7, 1/2 Shank - TB4

T-CUT DOVETAIL BIT This bit allows you to cut matching dovetail joints to the precision and accuracy found in fine furniture. Suits T-CUT Dovetail Jig.

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” PART No. TDP 20 TDP 20 1/2 TDP 35 1/2

A in. 1 1 1-1/4

B mm 25.4 25.4 31.8

in. .609 .609 .760

C mm 15.5 15.5 19.3

in. 2 2-3/8 2-3/4

mm 50.8 60 70

DRIP SEAL GROOVER These bits cut a 2.5mm wide & 8mm deep grove for fitting drip, dust & smoke seals to window frames. A countersunk screw securing the cutter allows for a flush cut.

NEW

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

6.35mm (1/4”) SHANK PART No. TB 19149

A 14.9

B 10

Replacement Ball Bearing TB7.

C 46

Retaining Ring TZR 1

Suffix 1/2 = 1/2” shank Otherwise 1/4” shank PART No.

Replacement Ball Bearing TB17

in. mm TDSG 44 B 1-47/64 44 TDSG 44 B 1/2 1-47/64 44

B in 3/32 3/32

mm 2.5 2.5

C in 2-51/64 2-51/64

mm 71 71

Email: Sales@cltoolcentre.com

Established 1969

ARBOR TA 25 TB 26

craftsman.18 A

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ROUTER BITS

Email: Sales@cltoolcentre.com

Premium Quality

Established 1969

GROOVE FORMING BITS HOOK SLOT BITS

T-SLOT CUTTERS

This bit will quickly drill and slot a convenient screw, nail or hook slot in the back of a picture frame, hanging shield, etc.

These bits allow you to make horizontal T-slots when used in hanging brackets, or creating wall display units, slatwall, etc. C B2 A1 A2

CARBIDE TIPPED A1 - TWO FLUTES A2 - SINGLE F L U T E

CARBIDE TIPPED - SINGLE FLUTE

12.7mm (1/2”) SHANK

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” A1 A2 PART No. in. mm in. mm THS 12 .355 9 3/16 4.8 THS 16 1/2 12.7 5/16 8 THS 16 1/2 1/2 12.7 5/16 8

B1 in. mm 1/8 3.2 1/8 3.2 1/8 3.2

A1 A2 B1 B2 C mm in. mm in. mm in. mm in. mm TSA 28 1/2 1-7/64 28 25/64 10 57/64 22.7 25/64 10 3-3/32 78.5 TSA 30 1/2 1-3/16 30 25/64 10 57/64 22.7 25/64 10 3-3/32 78.5 TSA 30.6 1/2 1-13/64 30.6 27/64 10.6 45/64 18 25/64 10 3-3/32 78.5

B2 C in. mm in. mm 3/8 9.5 1-5/8 41 1/2 12.7 1-3/4 44.4 1/2 12.7 2-5/8 67

PART No.

in.

EDGE & FACE FORMING BITS “V” GROOVE BITS

22.5˚ VEE GROOVE BITS

60˚ VEE GROOVE BITS

22.5 Degree included Angle Single Flute - Solid Carbide

This bit is specifically designed for sign and lettering work.

C B 0.5 mm Flat

PART No. TV 2208 TV 2216 1/2

A in. 1/4 1/2

B mm 6.4 12.7

in. 37/64 1-13/64

6 0 ° I N CL U D E D A N G L E CARBIDE TIPPED - TWO FLUTES

C mm 14.7 30.6

in. 2-1/4 3

mm 57.2 76.2

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” * These bits are not guaranteed against tip breakage due to thin section of carbide at the point

PART No. T 6128 T 6128 1/2

Ph: 07 - 3326 1500

30˚ VEE GROOVE BITS 30 Degree included Angle - Single Flute - Solid Carbide

TV 3008 TV 3016 1/2

A in. 1/4 1/2

B mm 6.4 12.7

in. -

C mm 22.4 22.4

in. 2-1/4 2-3/4

mm 57.1 70

A versatile bit for decorative vee grooves and chamfering. Used for sign and lettering work. Also mitre joints for box fabrication.

PART No.

B mm 25.4 25.4

90˚ VEE GROOVE BITS

0.5 mm Flat

A in. 1 1

C mm 10.9 22.8

in. 2-1/4 3

NEW

mm 57.2 76.2

B A

9 0 ° I N C LU D E D A N G L E TWO FLUTES CARBIDE TIPPED

45º VEE GROOVE BITS

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

45 Degree included angle - Single Flute - Solid Carbide

PART No.

NEW

A in.

B mm

in.

C mm

in.

1-3/8 1-7/8

35 47

HIGH SPEED STEEL H 112 H 128

17/32 1-15/64

13.5 31.3

3/8 7/8

9.5 22

CARBIDE TIPPED

• PART No. TV 4508 TV 4516 1/2

A in. 1/4 1/2

B mm 6.35 12.7

in – 37/64

C mm 7.0 14.7

in 2-1/4 3.0

mm 57.15 76.2

•

T 112 45/64 18 .365 9.2 1-3/4 T 112 W/F * 45/64 18 7 T 128 1-15/64 31.3 5/8 15.9 2 T 128 1/2 1-15/64 31.3 5/8 15.9 2-1/2 T 1230 1/2 1-9/16 39.7 25/32 20 3-3/8 T 1236 1/2 1-49/64 45 1-13/64 30.5 3-13/64 T 1240 1/2 2 50.8 1 25.4 3 * Ground with a flat, for use on aluminium composite materials.

44.4 42 50.8 63.5 86 81.5 76

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

CORE BOX BITS

120 Degree Included Angle – Two Flute – Carbide Tipped

C B

C in. 1-45/64 2-13/64 2-29/32

For use in fluting flat surfaces such as mantles and facades.

TWO FLUTE

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” A

PART No.

in.

150º VEE GROOVE BITS

H 408 H 412 H 416 H 420 H 424

1/4 3/8 1/2 5/8 3/4

6.35 9.5 12.7 15.9 19

150 Degree Included Angle - Two Flute - Carbide Tipped

T 408

1/4

TV 1232 TV 1232 1/2 TV 1264 1/2

in. 1 1 2

mm 25.4 25.4 50.8

in. -

mm 7.5 7.5 14.7

mm 43.3 55.9 73.8

NEW

PART No. TV 1532 TV 1532 1/2 TV 1564 1/2

A in. 1 1 2

B mm 25.4 25.4 50.8

in 21/64 21/64 0.058

C mm 8.4 8.4 14.8

in 1-19/32 2.10 2-19/32

mm 40.4 53.4 65.8

C mm

R RADIUS in. mm

in.

1-1/4 1-1/4 1-1/4 1-3/8 1-3/8

31.8 31.8 31.8 35 35

1/8 3/16 1/4 5/16 3/8

3.2 4.8 6.35 8.0 9.5

SOLID CARBIDE 6.35 5/16 8 1-1/2

38.1

1/8

3.2

CARBIDE TIPPED 7.9 1/4 6.35 9.5 1/4 6.35 12.7 31/64 12.2 12.7 31/64 12.2 15.9 3/8 9.5 15.9 3/8 9.5 19 1/2 12.7 19 1/2 12.7 25.4 5/8 15.9 31.8 3/4 19 38 7/8 22.2

31.8 31.8 38.1 57.1 44.4 57.1 47 57.1 63.5 63.5 67

5/32 3/16 1/4 1/4 5/16 5/16 3/8 3/8 1/2 5/8 3/4

4.0 4.8 6.35 6.35 8.0 8.0 9.5 9.5 12.7 15.9 19.0

HIGH SPEED STEEL

T 410 T 412 T 416 T 416 1/2 T 420 T 420 1/2 T 424 T 424 1/2 T 432 1/2 T 440 1/2 T 448 1/2

Suffix 1/2 = 1/2” shank Otherwise 1/4” shank

in.

5/16 3/8 1/2 1/2 5/8 5/8 3/4 3/4 1 1-1/4 1-1/2

1/4 1/4 11/32 3/8 15/32

6.35 6.35 8.7 9.5 12

1-1/4 1-1/4 1-1/2 2-1/4 1-3/4 2-1/4 1-7/8 2-1/4 2-1/2 2-1/2 2-5/8

ROUTER BITS

120˚ VEE GROOVE BITS

PART No.

Premium Quality

EDGE & FACE FORMING BITS

ROUND NOSE BITS For decorative coves and veins.

PROVINCIAL DESIGN VEINING BITS For recess design veining in fine cabinet surfaces. Designed for template routing.

T 503-502 T 503-503 T 503-504 T 503-505

B mm 2.4 3.2 4.8 6.35

in. 1/4 1/4 1/4 3/8

C mm 6.35 6.35 6.35 9.5

in. 1-1/2 1-1/2 1-1/2 1-1/2

mm 38.1 38.1 38.1 38.1

For grooving and scoring panel designs in wood surfaces such as cupboard doors.

C B

S I N G L E F L UT E

6.35 mm (1/4”) SHANK

H 302 H 304 H 307

1/16 1/8 7/32

T 302 T 303 T 304 T 305 T 306 T 307

1/16 3/32 1/8 5/32 3/16 7/32

PART No.

B mm

A in. 1/2 5/8 3/4

B mm 12.7 15.9 19

in 1 1/4 1 1/4 1 1/2

C mm 31.75 31.75 38.1

in 3.0 3.0 3.27

mm 76.7 76.7 83.1

R Radius in mm 1/4 6.35 5/16 8 3/8 9.5

BALL END BITS For cutting a channel for ropes, cables or pipes. We recommend cutting a straight groove prior to using the ball end bit to ease the cutting pressure on the tool.

A in.

Carbide Tipped Two Flute

TRN 416 1/2 TRN 420 1/2 TRN 424 1/2

VEINING BITS

PART No.

Ph: 07 - 3326 1500

6.35 mm (1/4”) SHANK in. 3/32 1/8 3/16 1/4

NEW

9 0 ° I N C LU D E D A N G L E SOLID CARBIDE - SINGLE FLUTE

PART No.

Email: Sales@cltoolcentre.com

Established 1969

in.

C mm

HIGH SPEED STEEL 1.6 3/16 4.8 3.2 5/16 7.9 5.5 7/16 11.1 SOLID CARBIDE 1.6 3/16 2.4 3/16 3.2 5/16 4 5/16 4.8 7/16 5.5 7/16

4.8 4.8 7.9 7.9 11.1 11.1

in.

1-5/8 1-5/8 1-5/8

41 41 41

1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2

38.1 38.1 38.1 38.1 38.1 38.1

NEW R Carbide Tipped Two Flute PART No. TBE 416 1/2 TBE 420 1/2 TBE 424 1/2

A in. 1/2 5/8 3/4

B mm 12.7 15.9 19

in 7/16 9/16 11/16

C mm in mm 11 2-13/64 56 14.2 2-21/64 59.2 17.5 2.46 62.5

R Radius in mm 1/4 6.35 5/16 8 3/8 9.5

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ROUTER BITS

Email: Sales@cltoolcentre.com

Premium Quality

Established 1969

EDGE & FACE FORMING BITS OGEE BITS ROUNDED BOTTOM

HALF CORE BOX BITS C B

Used for decorative plunge cutting, grooving or edge forming.

R CARBIDE TIPPED TWO FLUTES

R A

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” A

PART No. PART No. THC 45 1/2 THC 75 1/2

A in. 2-1/2 3

B mm 63.5 76.2

in. 43/64 23/32

C R RADIUS mm in. mm in. mm 17.0 2-45/64 68.7 45.0 18.3 2-13/16 71.4 2-61/64 75.0

in. TR 7506 .937 TR 7506-1/2 .937 TR 7509 1-1/4 TR 7509-1/2 1-1/4

mm 23.7 23.7 32 32

in. .580 .580 .700 .700

C mm 14.7 14.7 17.7 17.7

in. 1-7/8 2-1/2 1-7/8 2-1/2

R RADIUS in. mm 3/16 4.7 3/16 4.7 1/4 6.35 1/4 6.35

mm 47 63.5 47 63.5

OGEE BITS Used for panel doors and decorative edge moulds. C

TWO FLUTES

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

B PART No. TRS 7506 1/2 TRS 7509 1/2

A1 PART No.

A1 mm

A2 mm

B in.

C mm

in.

1-3/4 1-7/8

44.4 47

R RADIUS in. mm

HIGH SPEED STEEL H 7506 H 7509

20 30.5

4.8 4.8

T 7502 T 7502 1/2 T 7504 T 7504 1/2 T 7506 T 7506 1/2 T 7509 T 7509 1/2

9.9 9.9 16.2 16.2 23.8 23.8 31.2 31.2

3.6 3.6 3.6 3.6 4.8 4.8 4.8 4.8

5/8 7/8

15.9 22.2

3/16 9/32

4.8 7.1

1/16 1/16 1/8 1/8 3/16 3/16 1/4 1/4

1.6 1.6 3.2 3.2 4.8 4.8 6.35 6.35

Ph: 07 - 3326 1500

CARBIDE TIPPED 3/8 3/8 1/2 1/2 5/8 5/8 45/64 45/64

9.5 9.5 12.7 12.7 15.9 15.9 18 18

1-7/8 2-1/2 1-7/8 2-1/2 1-7/8 2-1/2 1-7/8 2-1/2

47 63.5 47 63.5 47 63.5 47 63.5

CARBIDE TIPPED - TWO FLUTES

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

B C R1 RADIUS R2 RADIUS mm in. mm in. mm in. mm in. mm 25.4 19/32 15.1 2-25/64 60.7 5/16 7.9 3/16 4.8 33.5 23/32 18.3 2-25/64 61.0 5/16 7.9 3/8 9.5

Designed for grooving panel doors and decorative edge moulds.

12.7mm A

CARBIDE TIPPED - TWO FLUTES

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

TW 7506 TW 7506 1/2 TW 7509 TW 7509 1/2

For Ogee grooves where a fine point is required. Used extensively in router lathe work.

OGEE BITS WIDE FLAT BOTTOM

PART No.

OGEE BITS FINE POINT

A in. 1 -

B R1

A in. 1-1/4 1-1/4 1-1/2 1-1/2

B mm 31.8 31.8 38.1 38.1

in. 5/8 5/8 3/4 3/4

C mm 15.9 15.9 19 19

in. 1-7/8 2-1/2 2 2-1/2

mm 47 63.5 50.8 63.5

R RADIUS in. mm 3/16 4.8 3/16 4.8 1/4 6.35 1/4 6.35

PROVINCIAL BITS with bearing Used for decorative edge and face moulds.

R 1mm A PART No. TF 7506 TF 7506 1/2 TF 7509 TF 7509 1/2

A in. .815 .815 1.040 1.040

B mm 20.7 20.7 26.4 26.4

in. 33/64 33/64 5/8 5/8

C mm 13 13 15.9 15.9

in. 1-7/8 2-1/4 1-7/8 2-1/2

mm 47 57.1 47 63.5

R R RADIUS in. mm 3/16 4.8 3/16 4.8 1/4 6.35 1/4 6.35

CARBIDE TIPPED - TWO FLUTES

PART No. TCRR 3 B TCRR 5 B 1/2

A in. 1-3/8

B mm 22.0 35.0

in. 25/64 35/64

C mm in. mm 10.0 2 50.8 14.0 2-45/64 68.7

Replacement Bearings 1/4 “-TB12, 1/2” -TB21

B A R RADIUS in. mm 1/8 3.2 5.0

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Used for panel doors and decorative edge moulds.

CARBIDE TIPPED TWO FLUTES

TC 6 TC 6 1/2 TC 10 TC 10 1/2 TC 12 1/2 TC 16 1/2

This bit produces a beading on the surface of the material coming to a fine point.

R 1mm

A A

in. 1/2 1/2 .760 .760 57/64 1-5/32

B mm 12.7 12.7 19.2 19.2 22.6 29.2

in. 1/2 1/2 9/16 9/16 5/8 3/4

C in. 1-3/4 2-1/2 1-3/4 2-5/16 2-1/2 2-1/2

mm 12.7 12.7 14.3 14.3 15.9 19

R RADIUS in. mm 3/32 2.4 3/32 2.4 5/32 4 5/32 4 3/16 4.8 1/4 6.35

mm 44.4 63.5 44.4 58.6 63.5 63.5

A CARBIDE TIPPED - TWO FLUTES

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” PART No. TBF 4 TBF 4 1/2 TBF 8 TBF 8 1/2

TRADITIONAL CLASSICAL BITS Used for panel doors and decorative edge moulds.

A in. .290 .290 -

B mm 7.4 7.4 13.7 13.7

in. 3/8 3/8 1/2 1/2

C mm 9.5 9.5 12.7 12.7

in. 1-3/4 2-5/8 1-3/4 2-5/8

mm 44.4 67 44.4 67

R RADIUS in. mm 1/8 3.2 1/8 3.2 1/4 6.35 1/4 6.35

BEADING BITS WIDE FLAT BOTTOM

CARBIDE TIPPED - TWO FLUTES

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

Specially designed for grooving panel doors. This bit produces a beading groove with a wide bottom.

B2 R B1

A in. mm TTC 8 11/16 17.4 TTC 8 1/2 11/16 17.4 TTC 12 .925 23.5 TTC 12 1/2 .925 23.5 TTC 16 1/2 1.160 29.5 PART No.

B1 in. mm 0.070 1.8 0.070 1.8 0.070 1.8 0.070 1.8 1/8 3.2

B2 in. 1/2 1/2 1/2 1/2 5/8

mm 12.7 12.7 12.7 12.7 16

C in. mm 1-3/4 44.4 2-1/4 57.1 1-3/4 44.4 2-1/4 57.1 2-1/4 57.1

TTCR 4 B TTCR 6 B 1/2

CARBIDE TIPPED - TWO FLUTES

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” PART No.

CARBIDE TIPPED - TWO FLUTES

A mm 22.0 35.0

TBW 4 TBW 4 1/2 TBW 8 TBW 8 1/2

TRADITIONAL CLASSICAL BITS with bearing

PART No.

12.7mm

R RADIUS in. mm 1/8 3.2 1/8 3.2 3/16 4.8 3/16 4.8 1/4 6.35

B1 mm 12.7 14.3

B2 mm 4.8 4.8

C mm 54 73.0

R1 mm 5.5 10.3

R2 B1

A in. 3/4 3/4 1 1

B mm 19 19 25.4 25.4

in. 7/16 7/16 3/4 3/4

C mm 11.1 11.1 19 19

in. 1-3/4 2-1/4 2-3/8 2-3/8

mm 44.4 57.1 50.8 60

Specially designed for grooving panel doors. Also produces a decorative edge beading.

R2 mm 4 6.0

R A

PART No. C

CARBIDE TIPPED - TWO FLUTES

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” A A

B mm 9.5 9.5 15.9 15.9

12.7mm

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

For grooving panel designs in wood surfaces such as cupboard doors.

in. 3/8 3/8 5/8 5/8

R B

CARBIDE TIPPED - TWO FLUTES

BEADING BITS

TBB 4 TBB 4 1/2 TBB 8 TBB 8 1/2

R RADIUS in. mm 1/8 3.2 1/8 3.2 1/4 6.35 1/4 6.35

DOUBLE BEADING BIT WIDE FLAT BOTTOM

Replacement Bearings 1/4 “-TB12, 1/2” -TB21

PART No.

Ph: 07 - 3326 1500

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” PART No.

BEADING BITS FINE POINT

ROUTER BITS

CLASSICAL BITS

Premium Quality

EDGE & FACE FORMING BITS

in. 3/8 3/8 1/2 1/2

C mm 9.5 9.5 12.7 12.7

in. 1-3/4 2-1/4 1-3/4 2-1/4

mm 44.4 57.1 44.4 57.1

B R 3.2mm

R RADIUS in. mm 1/8 3.2 1/8 3.2 1/4 6.35 1/4 6.35

Email: Sales@cltoolcentre.com

Established 1969

TBD 4 TBD 4 1/2 TBD 8 1/2

A in. 1 1 1-1/2

B mm 25.4 25.4 38.1

in. 7/16 7/16 3/4

C mm 11.1 11.1 19

in. 1-3/4 2-1/4 2-1/2

mm 44.4 57.1 63.5

R RADIUS in. mm 1/8 3.2 1/8 3.2 1/4 6.35

SPECIAL B I T S Are made to any size or detail. Please furnish a wood sample, drawing or dimensioned sketch when ordering.

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ROUTER BITS

Email: Sales@cltoolcentre.com

Premium Quality

Established 1969

EDGE & FACE FORMING BITS EXTENDED ROUNDING OVER BITS

EXTENDED DOUBLE BEADING BITS

This bit is used for rounding over edges in areas where a ball bearing is not required. It makes a decorative edge, or can be used to plunge completely through the material.

C R2 R1

B A

CARBIDE TIPPED - TWO FLUTES

R1 RADIUS R2 RADIUS PART No. in. mm in. mm in. mm in. mm in. mm TBX 604 1/2 1 25.4 1-1/8 28.6 2-29/32 73.8 1/8 3.2 1/8 3.2 TBX 606 1/2 1-1/8 28.6 1-3/16 30.2 3 76.2 3/16 4.8 1/8 3.2 A

CARBIDE TIPPED - TWO FLUTES

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

NO BEARING

PART No. TX 506 TX 508 TX 508 1/2 TX 512 1/2 TX 516 1/2 TX 520 1/2 TX 524 1/2

A1 mm 20 25 25 33 39 45 51

A2 mm 10 13 13 13 13 13 13

B mm 16 19 19 25 25 28.6 31.8

C mm 53 59 72 79 84 82 90.8

R RADIUS mm 5 6 6 10 13 16 19

24.7 32.7 38.7

12.7 12.7 12.7

19 25 25

71 74 80

6 10 13

EXTENDED PROVINCIAL BITS C R

WITH BEARING

TX 508 B 1/2 TX 512 B 1/2 TX 516 B 1/2

R A

CARBIDE TIPPED - TWO FLUTES

A B C R1 RADIUS R2 RADIUS in. mm in. mm in. mm in. mm in. mm TCRX 8 1/2 1 25.4 1-15/64 31.3 3 76.2 1/8 3.2 1/8 3.2 TCRX 12 1/2 1-1/8 28.6 1-19/64 32.9 3-7/64 79.0 3/16 4.8 1/8 3.2 PART No.

Replacement Ball Bearing TB11

DISH CUT BITS These bits are used for routing trays, bowls, plates and boxes. They have a wide surface cut, to quickly remove excess material.

CARBIDE TIPPED TWO FLUTES

12.7 mm (1/2”) SHANK

CARBIDE TIPPED TWO FLUTES WITH BEARING

12.7 mm (1/2”) SHANK

Ph: 07 - 3326 1500

A mm 19 32

PART No. TD 706 1/2 TD 716 1/2

B R

B mm 19 32

C mm 64 77

R RADIUS mm 4.75 6.5

PART No. TD 706 B 1/2 TD 712 B 1/2

A mm 19 28.6

B mm 19 32

C mm 76.8 89.9

R RADIUS mm 4.75 6

BEARING NO. TB4 TB18

Retaining Ring TZR 3

EDGE FORMING BITS PALACE PATTERN BITS An attractive edge mould for table and bench tops.

B1 CARBIDE TIPPED - TWO FLUTE WITH BA LL BEARING GUIDE

12.7 mm (1/2”) SHANK PART No.

PART No. TEB 10 B 1/2

PART No. TEB 11 B 1/2

PART No. TEB 12 B 1/2

A A

in.

TEB 09 B 1/2

1-1/4

31.8

25.4

9/32

7.1

3-1/8

TEB 10 B 1/2

1-1/4

31.8

25.4

3/8

9.5

3-1/8

TEB 11 B 1/2

1-5/16

1-9/32

32.5

0.590

3/8

TEB 12 B 1/2

1-9/32

32.5

1-9/32

32.5

3/4

3-1/4

Replacement Ball Bearing TB11.

PART No. TEB 09 B 1/2

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

E = 4.8mm (3/16”) TWO FLUTE - WITH PILOT

in.

B mm

in.

C mm

in.

H 508 H 510 H 512 H 516

3/4 3/4 1 1-1/4

19 19 25.4 31.8

HIGH SPEED STEEL 1/2 12.7 1-7/8 1/2 12.7 1-7/8 5/8 15.9 2 13/16 20.6 2

T 506 T 508 T 510 T 512 T 516

9/16 11/16 13/16 15/16 1-3/16

14.2 17.5 20.6 23.8 30.1

CARBIDE TIPPED 1/2 12.7 1-3/4 9/16 14.3 1-7/8 9/16 14.3 1-7/8 5/8 15.9 2 13/16 20.6 2-1/4

Gives extra smooth chatter free cuts due to precise tool geometry. Can be converted to a beading bit by using bearing TB 9.

PART No.

47 47 50.8 50.8

1/4 5/16 3/8 1/2

6.35 7.9 9.5 12.7

44.4 47 47 50.8 57.1

3/16 1/4 5/16 3/8 1/2

4.8 6.35 7.9 9.5 12.7

A in. 3/4 3/4 1

T 604 T 608 T 612

9/16 13/16 1-1/16

NEW

•

• •

3.2 6.35 9.5

1/8 1/4 3/8

3.2 6.35 9.5

C R

NEW

B mm in. 15.9 5/16 16.7 11/32 19 1/2 20.6 7/16 22.2 15/32 22.2 15/32 22.5 15/32 24.7 33/64 25.4 1/2 25.4 1/2 28.6 1/2 28.6 1/2 31.8 5/8 31.8 5/8 32.7 21/32 36.7 45/64 38.1 3/4 38.1 3/4 44.5 7/8 50.8 1 57.1 1-5/64 63.5 1-1/4 76.2 1-15/32

mm 7.9 8.7 12.7 11.1 12 12 12 13 12.7 12.7 12.7 12.7 15.9 15.9 16.5 18 19 19 22.2 25.4 27.4 31.8 37.3

C in. 1-7/8 1 7/8 2 2 2 2-1/2 2 2-3/16 2 2-1/2 2 2-5/8 2-1/4 2-5/8 2-53/64 2-57/64 2-1/4 2-3/4 3-1/4 3-1/4 3-1/2 3-5/8 3-3/4

mm 47 47 50.8 50.8 50.8 63.5 50.8 55.5 50.8 63.5 50.8 67 57.1 67 72 73.5 57.1 70 82 82 89 92 95

R RADIUS in. mm 1/16 1.6 5/64 2 1/8 3.2 4 3/16 4.8 3/16 4.8 5 15/64 6 1/4 6.35 1/4 6.35 5/16 7.9 5/16 7.9 3/8 9.5 3/8 9.5 25/64 10 15/32 12 1/2 12.7 1/2 12.7 5/8 15.9 3/4 19 7/8 22.2 1 25.4 1-1/4 31.8

ROUND OVER FILLET BITS

• •

A mm 7.9 8.7 12.7 11.1 12 12 12 13 12.7 12.7 12.7 12.7 15.9 15.9 16.5 18 19 19 22.2 25.4 27.4 31.8 37.3

C in. 1-7/8 1-7/8 2 2 2 2-1/2 2 2-3/32 2 2-1/2 2 2-5/8 2-1/4 2-5/8 2-3/4 2-51/64 2-1/4 2-3/4 3-1/4 3-1/4 3-1/2 3-5/8 3-3/4

mm 47 47 50.8 50.8 50.8 63.5 50.8 53.2 50.8 63.5 50.8 67 57.1 67 69.7 71.2 57.1 70 82 82 89 92 95

Replacement Ball Bearing TB9

DOUBLE BEADING BITS C

CARBIDE TIPPED TWO FLUTES WITH BA LL BEARING GUIDE

12.7 mm (1/2”) SHANK B

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

A A

•

T 602 B T 602 MB T 604 B T 604 MB T 606 B T 606 B 1/2 T 605 MB T 606 MB T 608 B T 608 B 1/2 T 610 B T 610 B 1/2 T 612 B T 612 B 1/2 T 610 MB 1/2 T 612 MB 1/2 T 616 B T 616 B 1/2 T 620 B 1/2 T 624 B 1/2 T 628 B 1/2 T 632 B 1/2 T 640 B 1/2

A in. 5/8 21/32 3/4 13/16 7/8 7/8 7/8 31/32 1 1 1-1/8 1-1/8 1-1/4 1-1/4 1-9/32 1-7/16 1-1/2 1-1/2 1-3/4 2 2-1/4 2-1/2 3

A decorative edge bead.

These bits are very popular for table and bench tops. Profiles are variable by raising or lowering the bit.

TEB 01 B 1/2 TEB 02 B 1/2 TEB 03 B 1/2 TEB 04 B 1/2

1/8 1/4 3/8

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

Replacement Ball Bearing TB11

PART No.

R RADIUS in. mm

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

PART No.

T 502 B T 502 MB T 504 B T 504 MB T 506 B T 506 B 1/2 T 505 MB T 506 MB T 508 B T 508 B 1/2 T 510 B T 510 B 1/2 T 512 B T 512 B 1/2 T 510 MB 1/2 T 512 MB 1/2 T 516 B T 516 B 1/2 T 520 B 1/2 T 524 B 1/2 T 528 B 1/2 T 532 B 1/2 T 540 B 1/2

B C in. mm in. mm HIGH SPEED STEEL 19 3/8 9.5 1-7/8 47 19 1/2 12.7 1-7/8 47 25 5/8 15.9 2 50.8 CARBIDE TIPPED 14.3 1/2 12.7 1-5/8 41 20.6 9/16 14.2 1-5/8 41 27 5/8 15.9 2 50.8 mm

H 604 H 608 H 612

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” A in. 5/8 21/32 3/4 13/16 7/8 7/8 7/8 31/32 1 1 1-1/8 1-1/8 1-1/4 1-1/4 1-9/32 1-7/16 1-1/2 1-1/2 1-3/4 2 2-1/4 2-1/2 3

E A

This bit is the same as the rounding over bit but has a smaller bearing leaving 1/16” edge bead. Can be converted to rounding over bit by using bearing TB11.

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

PART No.

TWO FLUTE - WITH PILOT

6.35 mm (1/4”) SHANK

R RADIUS in. mm

E = 4.8mm (3/16”)

E A

6.35 mm (1/4”) SHANK

in.

BEARING No.

2-1/4 2-1/4 2.80 2.80

57.1 57.1 71.1 71.1

15/16 15/16 15/16 15/16

23.8 23.8 23.8 23.8

3-1/4 3-1/4 3-1/4 3-1/4

82 82 82 82

TB11 TB9 TB11 TB9

A B C in. mm in. mm in. mm TB 606 B 1-3/8 35 11/16 17.4 2-1/4 57.1 TB 606 B 1/2 1-3/8 35 11/16 17.4 2-3/4 70 TB 608 B 1/2 1-5/8 41 7/8 22.2 3-1/8 79 PART No.

R2 R1

Email: Sales@cltoolcentre.com

Ideal for drop leaf table joints and rounded edges.

A decorative edge bit with pilot for early American furniture making.

ROUTER BITS

BEADING BITS

ROUNDING OVER BITS

PART No.

Premium Quality

EDGE FORMING BITS

Ph: 07 - 3326 1500

Established 1969

A R1 RADIUS R2 RADIUS in. mm in. mm 3/16 4.8 1/4 6.35 3/16 4.8 1/4 6.35 1/4 6.35 5/16 7.9

Replacement Ball Bearing TB9.

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ROUTER BITS

Email: Sales@cltoolcentre.com

Premium Quality

Established 1969

EDGE FORMING BITS COVE BITS

DOUBLE BEADING BITS

Used for a drop leaf table joints and decorative edges.

A decorative edge bead.

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

in. TBR 608 B 1-1/4 TBR 608 B 1/2 1-1/4 TBR 616 B 1/2 2

B C mm in. mm in. mm 31.8 17/32 13.3 2 50.8 31.8 17/32 13.3 2-1/2 63.5 50.8 29/32 22.9 3-1/8 79.4

R1 RADIUS R2 RADIUS in. mm in. mm 1/4 6.4 1/8 3.2 1/4 6.4 1/8 3.2 1/2 12.7 1/4 6.35

Replacement Ball Bearing TB9.

TRIPLE BEADING BITS A decorative edge bead.

C R1 B R2 R1

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

12.7 mm (1/2”) SHANK A

Replacement Ball Bearing TB9.

A B C R1 RADIUS R2 RADIUS in. mm in. mm in. mm in. mm in. mm TT 606 B 1/2 1-3/4 44.4 7/8 22.2 3-1/4 82 3/16 4.8 1/4 6.35 TT 608 B 1/2 2-1/8 54 1-1/16 27 3-1/4 82 1/4 6.35 5/16 7.9 PART No.

BEADING OGEE BITS

Ph: 07 - 3326 1500

Produces a decorative edge moulding.

C R1 R2 B R2

CARBIDE TIPPED - TWO FLUTE W I T H B A LL B E A R I N G G U ID E

A B C R1 RADIUS R2 RADIUS in. mm in. mm in. mm in. mm in. mm TBO 30 B 1-1/8 28.6 21/32 16.5 2-1/4 57.1 7/64 2.75 1/4 6.35 TBO 30 B 1/2 1-1/8 28.6 21/32 16.5 2-5/8 67 7/64 2.75 1/4 6.35 TBO 35 B 1-3/8 35 7/8 22.2 2-1/2 63.5 3.15 5/16 8 TBO 35 B 1/2 1-3/8 35 7/8 22.2 3 76 3.15 5/16 8 TBO 50 B 1/2 1-7/8 47 1-5/16 33 3-3/8 86 3/16 4.75 1/2 12.7

PART No.

Replacement Ball Bearing TB11.

E A

6.35 mm (1/4”) SHANK A

PART No.

in.

H 708 H 712 H 716

11/16 1 1-1/4

T 706 T 708 T 712 T 716

9/16 11/16 15/16 1-3/16

B mm

in.

C mm

in.

HIGH SPEED STEEL 17.4 1/2 12.7 1-7/8 25 3/4 19 2 32 13/16 20.6 2 CARBIDE TIPPED 14.2 3/8 9.5 1-5/8 17.5 9/16 14.2 1-7/8 24 5/8 15.9 2 30 13/16 20.6 2

R RADIUS in. mm

mm 47 50.8 50.8

1/4 3/8 1/2

6.35 9.5 12.7

41 47 50.8 50.8

3/16 1/4 3/8 1/2

4.8 6.35 9.5 12.7

Up, sheer cutting angle clears chips fast for chatter free accurate routing.

CARBIDE TIPPED - TWO F L U T E S W I TH B A L L B E A R I NG G U I D E

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” PART No.

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

E = 4.8mm (3/16”) TWO FLUTE - WITH PILOT

A PART No.

T 702 B T 704 B T 706 B T 708 B T 708 B 1/2 T 710 B T 710 B 1/2 T 712 B T 712 B 1/2 T 716 B T 716 B 1/2 T 720 B 1/2 T 724 B 1/2

A A

in. 5/8 3/4 7/8 1 1 1-1/8 1-1/8 1-1/4 1-1/4 1-1/2 1-1/2 1-3/4 2

B mm 15.9 19 22.2 25.4 25.4 28.6 28.6 31.8 31.8 38.1 38.1 44.5 50.8

in. 5/16 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8 5/8 7/8 7/8

C mm 7.9 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 15.9 15.9 22.2 22.2

in. 2-3/32 2-3/32 2-3/32 2-3/32 2-1/2 2 2-5/8 2-3/32 2-5/8 2-1/4 2-3/4 3 3-1/4

R RADIUS in. mm 1/16 1.6 1/8 3.2 3/16 4.8 1/4 6.35 1/4 6.35 5/16 7.9 5/16 7.9 3/8 9.5 3/8 9.5 1/2 12.7 1/2 12.7 5/8 15.9 3/4 19

mm 53 53 53 53 63.5 50.8 67 53 67 57.1 70 76 82

Replacement Ball Bearing TB11

CLASSICAL COVE BITS A decorative edge moulding. By fitting the optional TB11 ball bearing the standard cove design can be achieved.

E D G E & D R AW FACE BIT C CARBIDE TIPPED TWO FLUTES WITH BA LL BEARING GUIDE

PART No. TEF 01 B 1/2

A A

in. 2.6

B mm 66

Replacement Ball Bearing TB11.

in. 45/64

C mm 18

in. 3

mm 76

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” PART No.

12.7mm (1/2”) SHANK

in. TC 708 B 1-1/8 TC 708 B 1/2 1-1/8 TC 712 B 1-3/8 TC 712 B 1/2 1-3/8 TC 716 B 1/2 1-5/8

A B

mm 28.6 28.6 35 35 41

Replacement Ball Bearing TB9

in. .530 .530 .670 .670 -

mm 13.5 13.5 17 17 22

C in. 2-1/4 2-1/2 2-1/4 2-3/4 3-9/32

mm 57.1 63.5 57.1 70 83.2

R RADIUS in. mm 1/4 6.35 1/4 6.35 3/8 9.5 3/8 9.5 1/2 12.7

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

R2 R1

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

PART No. TDC 706B TDC 706B 1/2 TDC 708B 1/2

in.

B mm

This versatile bit produces a very decorative moulding used extensively on many furniture and building applications.

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” A

CLASSICAL BITS

Produces a decorative edge moulding. By fitting the optional TB11 ball bearing a cove effect can be achieved.

in.

1-1/2 38.1 3/4 1-1/2 38.1 3/4 1-3/4 44.4 7/8

C mm

in.

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G GU ID E

R1 RADIUS R2 RADIUS mm in. mm in. mm

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

19 2-1/4 57.1 3/16 4.8 1/4 6.35 19 2-3/4 70 3/16 4.8 1/4 6.35 22.2 3 76 1/4 6.35 5/16 7.9

PART No.

in. TC 8 B 1-1/8 TC 8 B 1/2 1-1/8

Replacement Ball Bearing TB9

B mm 28.6 28.6

in. 1/2 1/2

mm 12.7 12.7

in. 2 2-1/2

mm 50.8 63.5

R RADIUS in. mm 1/8 3.2 1/8 3.2

ROUTER BITS

DOUBLE COVE BITS

Premium Quality

EDGE FORMING BITS

ACTUAL SIZE

TRIPLE COVE BITS Produces a decorative edge moulding or any combination of the three radii can be used. By fitting the optional TB11 ball bearing a different profile can be achieved.

R1 R2

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

12.7mm (1/2”) SHANK

PART No. TC 12 B 1/2 TB11 BEARING FITTED

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” A

PART No.

A B C R1 RADIUS R2 RADIUS in. mm in. mm in. mm in. mm in. mm TTC 706B 1/2 1-7/8 47 1 25.4 3-1/4 82 3/16 4.8 1/4 6.35 TTC 708B 1/2 2-1/4 57.1 1-1/8 28.6 3-3/8 86 1/4 6.35 5/16 7.9

PART No.

TB9 BEARING FITTED

in. TC 12 B 1-3/8 TC 12 B 1/2 1-3/8

B mm 35 35

in. 5/8 5/8

C mm 15.9 15.9

in. 2-1/4 2-3/4

mm 57.1 70

R RADIUS in. mm 3/16 4.8 3/16 4.8

ACTUAL SIZE

Replacement Ball Bearing TB9

Email: Sales@cltoolcentre.com

Established 1969

PROVINCIAL BITS Like so many of Carb-I-Tool’s router bits this bit can be used as illustrated to produce decorative edge mouldings or by using the guide on your machine many combinations of rounds and covers can be achieved.

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

PART No.

in. TCR 8 B 1 TCR 8 B 1/2 1 TCR 12 B 1-1/4 TCR 12 B 1/2 1-1/4 TCR 16 B 1/2 1-1/2

PART No.

mm 25.4 25.4 31.8 31.8 38.1

in. 0.460 0.460 .560 .560 0.710

TC 16 B 1/2 C

mm 11.7 11.7 14.2 14.2 18

in. 2 2-5/8 2-1/4 2-5/8 2-3/4

mm 50.8 67 57.1 67 70

R RADIUS in. mm 1/8 3.2 1/8 3.2 3/16 4.8 3/16 4.8 1/4 6.35

Replacement Ball Bearing TB11.

C B

in. TCRA 16 B 1 1/4 TCRA 16 B 1/2 1 1/4 TCRA 32 B 1/2 2

B C mm in. mm in. mm 31.8 19/32 15.0 2-1/4 57.2 31.8 19/32 15.0 2-5/8 66.7 50.8 15/16 23.8 3-1/4 82.6

R1 RADIUS in. mm 1/4 6.4 1/4 6.4 1/2 12.7

R2 RADIUS in. mm 1/8 3.2 1/8 3.2 1/4 6.35

A in. 15/8

B mm 41

in. -

C mm 22

in. 3-9/32

mm 83.2

R RADIUS in. mm 1/4 6.35

Replacement Ball Bearing TB11.

TRADITIONAL CLASSICAL BITS This bit produces a traditional style furniture moulding.

CARBIDE TIPPED TWO FLUTE W I T H B A LL B E A R I N G G U ID E

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” A in. mm TTC 8 B 1 25.4 TTC 8 B 1/2 1 25.4 TTC 12 B 1-1/4 31.8 TTC 12 B 1/2 1-1/4 31.8 TTC 16 B 1-1/2 38.1 TTC 16 B 1/2 1-1/2 38.1 PART No.

PART No.

TB9 BEARING FITTED

12.7 mm (1/2”) SHANK

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” A

PART No. TC 16 B 1/2 TB11 BEARING FITTED

Ph: 07 - 3326 1500

B1 in. mm 7/16 11.1 7/16 11.1 7/16 11.1 7/16 11.1 9/16 14.3 9/16 14.3

B2 C Radius mm in. mm in. mm R1 R2 5/64 2 2-1/8 54 3.2 2 5/64 2 2-1/2 63.5 3.2 2 5/64 2 2-1/8 54 4.8 3.5 5/64 2 2-9/16 65 4.8 3.5 1/8 3.2 2-1/4 57.1 6.35 6.35 1/8 3.2 2-3/4 70 6.35 6.35

Replacement Ball Bearing TB11.

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ROUTER BITS

EDGE FORMING BITS CHAMFERING BITS

REBATING BITS Pilot equipped bits do not require a guide when making rebating cuts.

Helpful in making almost invisible joints. E = 4.8mm (3/16”) TWO FLUTES - WITH PILOT

6.35 mm (1/4”) SHANK

E = 4.8mm (3/16”) TWO FLUTES - WITH PILOT

6.35 mm (1/4”) SHANK

450 CHAMFER PART No.

A in.

B mm

in.

C mm

PART No.

in.

1-7/8

1.94

49.5

HIGH SPEED STEEL H 916

T 916

1-3/16

25.4 5/8 15.9 CARBIDE TIPPED 30.2 45/64 18.0

A popular method of removing sharp corners for a professional finish.

H 1708 H 1712

11/16 15/16

T 1708 T 1712

11/16 15/16

B C mm in. mm in. mm HIGH SPEED STEEL 17.5 7/16 11.1 1-7/8 47 23.8 1/2 12.7 2 50.8 CARBIDE TIPPED 17.5 23.8

7/16 1/2

11.1 12.7

2 2

D Depth in. mm 1/4 3/8

6.35 9.5

50.8 50.8

1/4 3/8

6.35 9.5

mm 50.8 63 57 63 76.2 65 65

D Depth in. mm 1/4 6.35 1/4 6.35 3/8 9.5 3/8 9.5 3/8 9.5 1/2 12.7 5/8 15.9

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” PART No.

PART No.

A in.

Has ball bearing guide for mar-free finish. Replacement bearing TB-11. By substituting TB-9 bearing the depth of rebate will be increased by 1/16” (1.6mm.)

CARBIDE TIPPED - TWO F L U T E S W I TH B A L L B E A R I NG G U I D E

Ph: 07 - 3326 1500

Email: Sales@cltoolcentre.com

Premium Quality

Established 1969

A in.

T 8105 B 1/2

47/64

T 8110 B 1/2

63/64

T 8122 B T 8122 B 1/2 TX 8122 B 1/2

1 1 1.42

T 8130 B T 8130 B 1/2

1-1/8 1-1/8

T 916 B T 916 B 1/2 T 920 B 1/2 T 924 B 1/2

1-3/8 1-3/8 1-7/8 2-1/4

T 8165 B T 8165 B 1/2 TX 8165 B 1/2

1.58 1.58 2.95

T 8180 B T 8180 B 1/2 TX 8180 B 1/2

1.58 1.58 2.95

T 1708 B T 1708 B 1/2 T 1712 B T 1712 B 1/2 TX 1712 B 1/2 T 1716 B 1/2 T 1720 B 1/2

mm in. mm in. mm in. mm CHAMFER FROM VERTICAL 18.5 1 27/64 36.1 36 3 5/8 92.1 CHAMFER FROM VERTICAL 24.9 1 7/16 36.5 36 3 5/8 92.1 CHAMFER FROM VERTICAL 25.4 21/32 16.5 39/64 15.5 2-1/4 57.1 25.4 21/32 16.5 39/64 15.5 2-3/4 70 36 1-1/4 32 28.4 3-1/4 82 CHAMFER FROM VERTICAL 28.6 43/64 17 35/64 13.9 2-1/4 57.1 28.6 43/64 17 35/64 13.9 2-3/4 70 CHAMFER FROM VERTICAL 35 5/8 15.9 29/64 11.4 2-1/4 57.1 35 5/8 15.9 29/64 11.4 2-3/4 70 47.6 1 25.4 11/16 17.5 2-3/4 70 57.1 1-1/4 31.8 22.5 3-1/4 82 CHAMFER FROM VERTICAL 40 5/8 15.9 1/4 6.35 2-3/32 53 40 5/8 15.9 1/4 6.35 2-1/2 63.5 75 1-3/8 35 14.5 2-3/4 70 CHAMFER FROM VERTICAL 40 9/16 14.3 3/32 2.4 2-1/4 50.8 40 9/16 14.3 3/32 2.4 2-1/2 63.5 75 1-1/4 32 7/32 5.5 2-9/16 65

A in. 1 1 1-1/4 1-1/4 1-1/4 1-1/2 1-3/4

B mm 25.4 25.4 31.7 31.7 31.7 38.1 44.5

in. 1/2 1/2 1/2 1/2 1 1/2 1/2

mm 12.7 12.7 12.7 12.7 25.4 12.7 12.7

C in. 2 2-1/2 2-1/4 2-1/2 3 2-9/16 2-9/16

SHIELDED BEARINGS These bearings can be fitted to the Rebating Bits to give a range of cut depths. PART No. TBS 1 TBS 2 TBS 3 TBS 4 TBS 5 TBS 6 TBS 7 TBS 8 TBS 9

OD in. 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4

ID mm 19.0 22.2 25.4 28.6 31.8 34.9 38.1 41.3 44.5

in. 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16

B mm 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8

in. 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16

mm 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8

For the Complete range of bearings

Replacement Ball Bearing TB11.

INVERTED CHAMFERING BIT

CHAMFERING BIT WITH RADIUS

Used for chamfering the bottom of boards.

C B1

45Û

TI 916 B 1/2

A in. 1 3/4

B1 mm 44.5

Replacement Ball Bearing TBS9.

in. -

PART No.

B2 mm 22.5

in. 5/8

TWO FLUTES - CARBIDE TIPPED

12.7 mm (1/2”) SHANK

CARBIDE TIPPED - TWO FLUTES

PART No.

C mm 15.9

in. 3

mm 76.3

in. TRR 10 B 1/2 1.57 TRR 16 B 1/2 2.4

B mm 40 60.9

in. .458 .530

Replacement Ball Bearing TB11.

C mm 11.6 13.5

in. 2-1/2 2-9/16

mm 63.5 65

R RADIUS in. mm .156 3.9 .156 3.9

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

STAIR HANDRAIL BIT C

A time saving bit for rounding over both sides of a board in one pass. CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

B2 B1

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

in. TBN 2 B 25/32 TBN 2 B 1/2 25/32 TBN 4.5 MB 1/2 51/64 TBN 5 MB 1/2 53/64 TBN 3 B 27/32 TBN 3 B 1/2 27/32 TBN 4 B 29/32 TBN 4 B 1/2 29/32 TBN 6 B 1-1/32 TBN 6 B 1/2 1-1/32 TBN 8 B 1/2 1-5/32 TBN 10 B 1/2 1-9/32 TBN 12 B 1/2 1-13/32 TBN 15 B 1/2 1-21/32 TBN 32 MB 1/2 1-57/64

B1 B2 mm in. mm in. mm 19.8 1/2 12.7 5/32 4 19.8 1/2 12.7 5/32 4 20.4 1/2 12.7 11/64 4.5 20.9 1/2 12.7 13/64 5 21.4 1/2 12.7 7/32 5.5 21.4 1/2 12.7 7/32 5.5 23 3/4 19 9/32 7.1 23 3/4 19 9/32 7.1 26.2 3/4 19 13/32 10.3 26.2 3/4 19 13/32 10.3 29.4 1 25.4 17/32 13.5 32.6 1-3/32 27.8 21/32 16.7 35.8 1-1/4 31.8 25/32 19.8 42 1-1/2 38.1 1-1/32 26.2 48 1-39/64 40.6 1-17/64 32

C in. 2 2-1/2 2-1/2 2-1/2 2 2-1/2 2-3/8 2-3/4 2-3/8 2-3/4 3 3-1/4 3-1/4 3-5/8 3-7/8

mm 50.8 63.5 63.5 63.5 50.8 63.5 60 70 60 70 76 82 82 92 98.4

Replacement Ball Bearing TB8.

29/32

3/4

9/32

7.1

2 33/64

12.7 mm (1/2”) SHANK PART No.

A in. 2

B mm 50.8

in. 2-1/4

C mm 57.1

in. 4.5

mm 116

Replacement Ball Bearing TB8.

STAIR HANDRAIL BIT

CANOE SLAT BITS

TCO 1 B 1/2

TBN 4 B 1/2

Use TBN 4 B or TBN 4 B 1/2 (see above) for matching cutter.

C B

B mm 22.6 22.6

in. 9/32 9/32

Profile on top of rail can be varied using a half bull nose bit (See diagrams on THR 50 B-1/2). CARBIDE TIPPED - TWO F L U T E S W I TH B A L L B E A R I NG G U I D E

12.7 mm (1/2”) SHANK

in. 57/64 57/64

OPTIONAL PROFILE Use THBN 75 B 1/2 for curved top

PROFILE

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

THR 50 B 1/2

WITHOUT BEARING

TBN 4 1/2

OPTIONAL

Ph: 07 - 3326 1500

PART No.

TCO 1 B TCO 1 B 1/2

This bit will produce an attractive and functional hand rail for balustrades. It can be used in conjunction with the half bull nose bit to curve the top over. This will produce an optional profile.

WITH BEARING

PART No.

ROUTER BITS

BULL NOSE RADIUS BITS

Premium Quality

EDGE FORMING BITS

C mm 7.1 7.1

in. 1 3/4 2 3/8

mm 44.5 60.3

PART No. THR 40 B 1/2 THR 60 B 1/2

Replacement Ball Bearing TB11.

A in. 2-5/16 2-1/8

B mm 58.7 54

in. 2

C mm 38.7 50.8

in. 3-13/16 4.3

mm 96.8 110

Replacement Ball Bearing TB8.

DRAWING LINE BITS A popular mould. Common on old style double hung windows, and architraves.

B2 B1 CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” PART No. TDL 3 B TDL 3 B 1/2 TDL 4 B TDL 4 B 1/2 TDL 6 B TDL 6 B 1/2

A in. .850 .850 .910 .910 1.035 1.035

mm 21.6 21.6 23.1 23.1 26.3 26.3

B1 in. mm 7/16 11.1 7/16 11.1 19/32 15 19/32 15 11/16 17.5 11/16 17.5

Replacement Ball Bearing TB8.

HALF BULL NOSE RADIUS BITS A handy bit for finishing wider timbers. The adjustment of machine height gives a variety of different forms.

B2 C in. mm in. mm 7/32 5.5 2 50.8 7/32 5.5 2-1/2 63.5 9/32 7.1 2-3/32 53 9/32 7.1 2-3/4 70 13/32 10.3 2-1/4 57.1 13/32 10.3 2-3/4 70

Email: Sales@cltoolcentre.com

Established 1969

B1 B2

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

12.7 mm (1/2”) SHANK

A B1 B2 C R RADIUS in. mm in. mm in. mm in. mm mm THBN 45 B 1/2 1 25.4 1.18 30 1.41 36 3-5/8 92 45 THBN 60 B 1/2 1-1/16 27 42.3 1-13/16 46 4-3/32 104 60 THBN 75 B 1/2 1-1/8 28.6 2 50.8 2-1/4 57.1 4-3/8 111.5 75 PART No.

Replacement Ball Bearing TB16.

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ROUTER BITS

Email: Sales@cltoolcentre.com

Premium Quality

Established 1969

EDGE FORMING BITS ROMAN OGEE BITS

OGEE BITS

A decorative edge bit for early American furniture making.

R R

TWO FLUTE - WITH PILOT

6.35 mm (1/4”) SHANK

PART No.

in.

H 5705 H 5708

3/4 1-1/4

19 31.8

T 5705 T 5708

3/4 1-1/4

19 31.8

in.

C mm

in.

R RADIUS in. mm

These bits produce a decorative form used widely on table and mantle edges. By fitting the optional TB9 ball bearing a 1/16” edge bead can be produced as illustrated.

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

HIGH SPEED STEEL 1/2 12.7 1-7/8 3/4 19 2 CARBIDE TIPPED 1/2 12.7 1-7/8 3/4 19 2

47 50.8

5/32 1/4

4 6.35

47 50.8

5/32 1/4

4 6.35

PART No.

in. T 7506 B 1-3/8 T 7506 B 1/2 1-3/8

B mm 34.9 34.9

in. 0.650 0.650

C mm in. mm 16.5 2-5/16 58.7 16.5 2-25/32 70.7

R RADIUS in. mm 3/16 4.8 3/16 4.8

ACTUAL SIZE C

CARBIDE TIPPED TWO FLUTES WITH BA LL BEARING GUIDE

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

PART No. T7508 B1/2 TB11 BEARING FITTED

in. T 5705 B 1-1/8 T 5705 B 1/2 1-1/8

B mm 28.6 28.6

in. 1/2 1/2

C mm 12.7 12.7

in. 2 2-5/8

PART No.

R RADIUS in. mm 5/32 4 5/32 4

mm 50.8 67

TB9 BEARING FITTED

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

PART No.

in. T 7508 B 1-5/8 T 7508 B 1/2 1-5/8

B mm 41 41

in. 3/4 3/4

C mm 19 19

in. 2-1/4 2-3/4

mm 57.1 70

R RADIUS in. mm 1/4 6.35 1/4 6.35

Ph: 07 - 3326 1500

ACTUAL SIZE

PART No. T 5705 B1/2

PART No. T7512 B1/2 TB11 BEARING FITTED

PART No. T 5708 B1/2

TB9 BEARING FITTED

12.7 mm (1/2”) SHANK SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” PART No. in. T 5708 B 1-1/2 T 5708 B 1/2 1-1/2 T 5712 B 1/2 2

B mm 38.1 38.1 50.8

in. 3/4 3/4 1

C mm 19 19 25.4

in. 2-3/8 2-3/4 3-3/8

R RADIUS in. mm 1/4 6.35 1/4 6.35 3/8 9.5

mm 60 70 86

Replacement Ball Bearing TB11

CARBIDE TIPPED - TWO FLUTE W I T H B A LL B E A R I N G GU ID E

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

TDO 8 B TDO 8 B 1/2 TDO 12 B 1/2 TDO 16 B 1/2

A in. 1-1/4 1-1/4 1-5/8 2

in. .575 .575 .763 .950

Replacement Ball Bearing TB11

R B R

A B

mm 31.8 31.8 41 50.8

C mm 14.6 14.6 19.4 24.1

T 7512 B 1/2

A in. 2-1/8

B mm 54

in. 1

C mm 25.4

in. 3-3/8

mm 86

R RADIUS in. mm 3/8 9.5

Replacement Ball Bearing TB11

SHALLOW ROMAN OGEE BITS

DOUBLE OGEE BITS

PART No.

in. 2-3/16 2-5/8 2-3/4 3

mm 55 67 70 76

This bit will produce a decorative edge moulding.

CARBIDE TIPPED TWO FLUTES W I T H B A LL B E A R I N G GUIDE

B1 R B2

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” R RADIUS in. mm 1/8 3.2 1/8 3.2 3/16 4.8 1/4 6.35

A B1 B2 C R RADIUS in. mm in. mm in. mm in. mm mm TS 5705 B 1-1/4 32 3/8 9.5 5/32 4 2 50.8 4 TS 5705 B 1/2 1-1/4 32 3/8 9.5 5/32 4 2-3/8 60 4 TS 5708 B 1/2 1-5/8 41 7/16 11.1 1/4 6.35 2-1/2 63.5 6.3 TS 5712 B 1/2 2 50.8 9/16 14.3 3/8 9.5 2-5/8 67 9.5 PART No.

Replacement Ball Bearing TB11.

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

A bit to enable production of batten moulding for the fixing of cement sheeting and other types of wall panelling.

DOUBLE EDGE RADIUS BIT

This versatile assembly enables you to round the top and bottom edges of timber at the same time. Assembly comes with bearing, spacer and washers, which allow you to cut up to 30mm material.

B2 B1 CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

12.7 mm (1/2”) SHANK B1 mm 28.6

in. 1.3

B2 mm 33

in. 7/8

in. 3-5/8

mm 92

PART No.

Replacement Ball Bearing TB8.

TDA 194-3 MB 1/2 TDA 194-5 MB 1/2 TDA 194-8 MB 1/2

TABLE EDGE BIT A popular bit for finishing table edges.

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

12.7 mm (1/2”) SHANK PART No. TEB 14B 1/2

T 194-3 M RH T 194-3 M LH T 194-5 M RH T 194-5 M LH T 194-8 M RH T 194-8 M LH

TABLE EDGE BIT WITH RETURN

12.7 mm (1/2”) SHANK

TEB 15 B 1/2 TEB 16 B 1/2

in. 2 2

C mm 97.8 97.8 97.8

R RADIUS mm 3 5 8

Cutter only Cutter only Cutter only Cutter only Cutter only Cutter only

– – – – – –

Top Bottom Top Bottom Top Bottom

3 3 5 5 8 8

Spaces between cutters nil (no Brg.) Brg. + 2 Washers Brg. + 5 Washers Brg. + Spacer Brg. + Spacer & 5 Washers

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

SPECIAL B I T S

R2 B

B mm 15-32 19-36 25-39

Replacement Ball Bearing TB12. Replacement Arbor TA 20.

This bit has a return to round over bottom of table for an attractive finish.

28 28 32 32 38 38

Wood Thickness 10 19 22 25 30

B C R1 RADIUS R2 RADIUS mm in. mm in. mm mm mm 50.8 0.720 18.3 3-1/8 79 8 16

Replacement Ball Bearing TB11.

PART No.

A mm 28 32 38

CUTTER ONLY

A in. 2

12.7 mm (1/2”) SHANK

C mm 22.2

Are made to any size or detail. Please furnish a wood sample, drawing or dimensioned sketch when ordering.

R1 RADIUS R2 RADIUS mm in. mm in. mm mm mm 50.8 1 5/16 33.5 - 94.7 6.35 16 50.8 36.7 3-27/32 97.6 8 16

Ph: 07 - 3326 1500

in. TBM 33 B 1/2 1-1/8

R R B

CARBIDE TIPPED - FOUR FLUTES W I T H B A LL B E A R I N G G U ID E

PART No.

ROUTER BITS

BATTEN MOULD BIT

Premium Quality

EDGE FORMING BITS

Replacement Ball Bearing TB11.

REED BITS TRS 3 B 1/2

TRD 3 B 1/2

TRM 3 B 1/2

B1 B2

SINGLE REED BIT

DOUBLE REED BIT

This bit will produce a single bead on the edge of the material.

PART No.

This bit gives a combination of two beads on the material.

Email: Sales@cltoolcentre.com

Established 1969

in.

TRS 3 B 1/2

.885

21.6

.397

7/32

5.5

2-1/2

63.5

TRD 3 B 1/2

.855

21.6

5/8

15.9

7/32

5.5

2-3/4

TRM 3 B 1/2

.855

21.6

1.16

29.5

7/32

5.5

3-1/4

M U LT I P L E R E E D B I T This bit gives a combination of four beads on the material.

CARBIDE TIPPED TWO FLUTE WITH BA LL BEARING GUIDE

12.7 mm (1/2”) SHANK Replacement Ball Bearing TB8.

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ROUTER BITS

Email: Sales@cltoolcentre.com

Premium Quality

Established 1969

EDGE FORMING BITS CLASSICAL C O M B I N AT I O N BITS

MULTI FORM COMBINATION BITS

This combination bit, developed by Carb-I-Tool, will cut a multitude of different shapes. Any part can be selected, multiple passes will also increase variety of shapes.

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

12.7 mm (1/2”) SHANK

With this combination bit the number of standard mouldings that can be produced is enormous. With multiple passes and a little imagination any number of beautiful mouldings can be produced.

B R

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

12.7 mm (1/2”) SHANK A B C R RADIUS in. mm in. mm in. mm in. mm TCB 50 B 1/2 1-21/32 42 1-3/16 30 3-5/8 92 3/16 4.8 TCB 60 B 1/2 1-21/32 42 1-3/16 30 3-5/8 92 3/16 4.8 PART No.

BEARING No. TB16 TB14

A B C in. mm in. mm in. mm TCB 500 B 1/2 1.65 41.9 1-5/16 33.3 3-3/4 95 TCB 600 B 1/2 1.65 41.9 1-5/16 33.3 3-5/8 92

PART No.

SOLID SURFACE BITS COUNTER TOP BIT

COUNTER TOP BIT

NO DRIP DESIGN TWO FLUTES - WITH CARBI-SMOOTH B E A R I NG A S S E M B LY & B A LL B E A R I NG G U I D E

NO DRIP DESIGN - TWO FLUTES

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

12.7 mm (1/2”) SHANK PART No. TSS 1 B 1/2

A 25.4

B 22.9

C 82

PART No. TSS 2 TSS 2 1/2

Replacement Bearing Assembly TBT21.

COUNTER TOP BIT

Ph: 07 - 3326 1500

Used in conjunction with TSS 2 and TSS 2 1/2

TWO FLUTES - WITH CARBI-SMOOTH BEARING A S S E M BLY & B A L L B E A R IN G GUIDE

R Face

Top

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

A 19 19

B 9.3 9.3

C 41 54

R RADIUS 6.35 6.35

BEVEL UNDERMOUNT BOWL BIT

TWO FLUTES - WITH CARBI-SMOOTH B E A R I NG A S S E M B LY & BALL BEARING GUIDE

12.7 mm (1/2”) SHANK PART No. TSS 3 B TSS 3 B 1/2

A 28.6 28.6

B 13.5 13.5

C 60 73

R RADIUS 6.35 6.35

A 35

B 32

ROMAN OGEE UNDERMOUNT BOWL BIT

ROUNDING OVER UNDERMOUNT BOWL BIT

CARBIDE TIPPED TWO FLUTES - WITH CARBI-SMOOTH BEARING A S S E M B LY & B A L L B E A R I N G G U I D E

12.7 mm (1/2”) SHANK

PART No. A B TSS 5 B 1/2 50.8 25.4

C 85

R1 5/32

Replacement Bearing Assembly TBT19.

C 88

Replacement Bearing Assembly TBT19.

Replacement Bearing Assembly TBT20.

PART No. TSS 4 B 1/2

R2 3/8

PART No. TSS 6 B 1/2

A 44.5

B 25.4

C 85

R RADIUS 9.5

Replacement Bearing Assembly TBT19.

R RADIUS BEARING in. mm No. 3/16 4.8 TB16 3/16 4.8 TB14

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ROUNDING OVER BIT

CARBIDE TIPPED TWO FLUTES - WITH BALL BEARING GUIDE

A 60.3 66.7

B 22.2 24.1

C 80 82

Face

R RADIUS 16 19

Replacement Bearing Assembly TBT20.

PART No. TSS 8 B 1/2 TSS 10 B 1/2

Replacement Bearing TB18. Retaining Ring TZR 3

FACE INLAY BIT

B 20.6 25.4

C 80 84

R RADIUS 16 19

CARBIDE TIPPED TWO FLUTES - WITH CARBI-SMOOTH BEARING A S S E M B LY & B A L L B E A R I N G G U I D E

CARBIDE TIPPED - SIX FLUTES

12.7 mm (1/2”) SHANK A 25.4 25.4 25.4 25.4 25.4 25.4

A 47.6 54

SURFACE PLANER

1/4” WIDTH-1/2” WIDTH

12.7 mm (1/2”) SHANK

B 1/4” 1/4” 1/4” 1/2” 1/2” 1/2”

C 66 66 66 73 73 72

G 1.6 3.2 4.8 1.6 3.2 4.8

BRG ASS TBT 22 TBT 21 TBT 20 TBT 22 TBT 21 TBT 20

PART No. TSS 13 1/2

CHAMFER BIT 15°

A 50.8

B 9.5

C 80

BOWL CUTTER 15°

CARBIDE TIPPED TWO FLUTES W I T H B A LL BEARING GUIDE

12.7 mm (1/2”) SHANK

PART No. TSS 14 B 1/2

A 28.6

B1 25.4

B2 28.4

PART No. TSS 15 B 1/2

C 85

A 28.6

B1 23.5

Replacement Ball Bearing TB18. Retaining Ring TZR 3

COUNTER TOP BIT

BEVEL BIT

B2 25.4

C 85

B2 28.4

C 79.4

Ph: 07 - 3326 1500

PART No. TSS 11 B 1/2 TSS 21 B 1/2 TSS 31 B 1/2 TSS 12 B 1/2 TSS 22 B 1/2 TSS 32 B 1/2

12.7 mm (1/2”) SHANK

12.7 mm (1/2”) SHANK PART No. TSS 7 B 1/2 TSS 9 B 1/2

CARBIDE TIPPED TWO FLUTES - WITH CARBI-SMOOTH BEARING A S S E M B LY & B A L L B E A R I N G G U I D E

ROUTER BITS

BULLNOSE BIT SET. INVERTED ROUNDING OVER BIT

Premium Quality

SOLID SURFACE BITS

CARBIDE TIPPED TWO FLUTE

12.7mm (1/2”) SHANK

CARBIDE TIPPED TWO FLUTE

12.7mm (1/2”) SHANK PART No. TSS 16 1/2

PART No. TSS 17 1/2

A 23.8

B 9.5

B1 25.4

FLUSH TRIM BIT C

CARBIDE TIPPED TWO FLUTE WITH CARBI-SMOOTH BEARING A S S E M B LY & B A L L BEARING GUIDE

12.7mm (1/2”) SHANK A 19

A 25.4

C 54

OVERHANG TRIM BIT

PART No. TSS 18 B 1/2

Email: Sales@cltoolcentre.com

Established 1969

B 25.9

C 87

Replacement Bearing Assembly TBT19.

CARBIDE TIPPED - TWO FLUTE WITH CARBI-SMOOTH B E A R I N G A S S E M B LY & B A LL BEARING GUIDE

12.7mm (1/2”) SHANK PART No. TSS 19 B 1/2

A 19

B 25.9

C 87

Replacement Bearing Assembly TBT21.

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Established 1969

ROUTER BITS

Email: Sales@cltoolcentre.com

Premium Quality

FACE MOULDING BITS Face moulding bits can be used for window sills, architraves, picture frames or handrails.

FACE MOULDING BIT

B CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

TFM 01 B 1/2

A1 in. -

mm 17.8

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

A1 A2

12.7mm (1/2”) SHANK PART No.

A2 in. mm 1-1/4 31.8

B in. mm 1-5/16 33

A1 A2

12.7mm (1/2”) SHANK

C in. mm 3-3/8 86

PART No. TFM 03 B 1/2

A in. 1/2

A2 mm 12.7

in. 1-1/4

B mm 31.8

in. 1-5/16

mm 33

C in. mm 3-3/8 86

Replacement Ball Bearing TB11.

FACE MOULDING BIT

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

12.7mm (1/2”) SHANK PART No. TFM 06 B 1/2

A in. 0.945

B mm 24

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

in. 1-7/16

C mm 36.5

in. 3-1/2

PART No.

mm 89

TFM 12 B 1/2

Replacement Ball Bearing TB8.

A in. 0.945

B mm 24

in. 1-7/16

C mm 36.5

in. 3-1/2

mm 89

Replacement Ball Bearing TB8.

FACE MOULDING BIT

Ph: 07 - 3326 1500

12.7mm (1/2”) SHANK

FACE MOULDING BIT

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

PART No. TFM 18 B 1/2

A in. 0.945

B mm 24

12.7mm (1/2”) SHANK

12.7mm (1/2”) SHANK in. 1-7/16

C mm 36.5

in. 3-1/2

PART No.

mm 89

TFM 24 B 1/2

Replacement Ball Bearing TB8.

A in. 1.0

B mm 25.4

in. 1-7/8

C mm 47.6

in. 4

mm 102

Replacement Ball Bearing TB8.

FACE MOULDING BIT

B CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

12.7mm (1/2”) SHANK PART No. TFM 30 B 1/2

A in. 1-3/4

B mm 44.5

Replacement Ball Bearing TB12.

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

in. 1-1/2

C mm 38.1

in. 4

12.7mm (1/2”) SHANK mm 102

PART No. TFM 32 B 1/2

A in. 1-3/4

B mm 44.4

Replacement Ball Bearing TB8.

in. 1-7/8

C mm 48

in. 4-1/8

mm 105

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599 Premium Quality

FACE MOULDING BITS

FACE MOULDING BIT

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G GU ID E

12.7mm (1/2”) SHANK

TFM 36 B 1/2

A in. 1-1/2

B mm 38.1

in. 1-5/8

C mm 41.3

in. 3-5/8

PART No.

mm 92

TFM 42 B 1/2

Replacement Ball Bearing TB8.

A in. 1-1/2

B mm 38.1

in. 1-5/8

C mm 41.3

in. 3-5/8

mm 92

Replacement Ball Bearing TB8.

FACE MOULDING BIT

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

12.7mm (1/2”) SHANK PART No. TFM 48 B 1/2

A in. 1-1/8

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G GU ID E

A B

mm 28.6

in. 1-5/8

C mm 41.3

12.7mm (1/2”) SHANK

in. 3-13/16

PART No.

mm 96.5

TFM 54 B 1/2

A in. 1-1/8

B mm 28.6

in. 1-5/8

C mm 41.3

in. 3-5/8

mm 92

Replacement Ball Bearing TB8.

FACE MOULDING BIT

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

PART No. TFM 60 B 1/2

A in. 1-5/8

B mm 41.3

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G GU ID E

12.7mm (1/2”) SHANK in. 1-3/4

12.7mm (1/2”) SHANK C

mm 44.5

in. 3-7/8

PART No.

mm 98

TFM 66 B 1/2

A in. 1-1/8

B mm 28.6

in. 2-1/4

C mm 57.1

in. 4-3/8

mm 111.5

Replacement Ball Bearing TB8.

FACE MOULDING BIT

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

TFM 72 B 1/2

A in. 1-1/8

B mm 28.6

Replacement Ball Bearing TB8.

in. 2-1/4

in. 4-3/8

12.7mm (1/2”) SHANK

C mm 57.1

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G GU ID E

12.7mm (1/2”) SHANK PART No.

Ph: 07 - 3326 1500

PART No.

12.7mm (1/2”) SHANK

ROUTER BITS

Face moulding bits can be used for window sills, architraves, picture frames or handrails.

Email: Sales@cltoolcentre.com

Established 1969

mm 111.5

PART No. TFM 80 B 1/2

A in. 1-1/4

B mm 31.8

in. 2-1/4

C mm 57.1

in. 4-3/8

mm 111.5

Replacement Ball Bearing TB8.

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ROUTER BITS

Email: Sales@cltoolcentre.com

Premium Quality

Established 1969

FACE MOULDING BITS DOUBLE REGENCY BIT

SINGLE REGENCY BIT

A decorative face mould to highlight the ends of protruding boards such as mantle supports.

B2 B1

CARBIDE TIPPED - TWO FLUTE W I T H B A LL B E A R I N G G U ID E

TDR 33 B 1/2

A in. 3/4

mm 19

CARBIDE TIPPED - TWO FLUTE W I T H B A LL B E A R I N G G U ID E

12.7mm (1/2”) SHANK PART No.

B2 B1

B1 in. mm 1-5/16 33

B2 in. 1.07

C mm 27.2

in. 3-3/8

in. TSR 33 B 1/2 15/16

A decorative face mould to highlight the ends of protruding boards, such as mantle supports.

CARBIDE TIPPED - TWO FLUTE W I T H B A LL B E A R I N G G U ID E

12.7mm (1/2”) SHANK

TSB 33 B 1/2

B1 in. mm 1-5/16 33

mm 19

in. 1-5/16

B2 mm 33

in. 45/64

mm 17.8

in. 3-5/8

mm 92

The range of Carb-I-Tool router bits and associated products, is continually being upgraded to reflect industry requirements. Carb-I-Tool (Aust.) Pty. Ltd. reserves the right to change specifications on existing tools where neccessary.

B2 B1

B1 mm 23.9

Replacement Ball Bearing TB8.

SURFACE BEADING BIT

in. 3/4

PART No.

mm 86

Replacement Ball Bearing TB8.

PART No.

12.7mm (1/2”) SHANK

B2 in. 5/8

C mm 15.9

in. 3-3/8

mm 86

Replacement Ball Bearing TB8.

Ph: 07 - 3326 1500

FINGER JOINT BITS Produces a very strong joint due to the extended glue line. Supplied with five, finger slot cutters, which are removable allowing for a range of joint thickness. C

5 C UTTERS

Designed to join large boards, as well as making spine and scarf, mortise and tenon joints. Supplied with three, 2-wing cutters as shown, additional cutter may be added if needed. For use with router table.

W OOD T HICKNESS : 31-36mm CARBIDE TIPPED -

12.7mm (1/2”) SHANK

4 C UTTERS 3 C UTTERS

2 C UTTERS

12.7mm (1/2”) SHANK

1 C UTTER

W OOD T HICKNESS :

PART No.

11-16mm

16-21mm

A in.

TAFJ 90 B 1/2 TFJS 90 TFJE 90

mm 40 40 39.6

Replacement Arbor TA23 Replacement Ball Bearing TB 3

21-26mm

B in.

CARBIDE TIPPED TWO WING

26-31mm

mm in. 30 3-7/8 Finger Slot Cutter Abutting Edge Cutter

mm 98.6

PART No. TAFJ 60 1/2 TFG 60

in.

A1 mm

A2 mm

in.

B2 mm

2-1/2 2-1/2

63.5 63.5

13.6 13.6

15/16 11/32

23.5 8.5

7.62 7.62

Replacement Arbor TA21

C in.

3-5/8 92 Cutter only

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

TONGUE AND GROOVE BITS

Premium Quality

JOINING BITS

This bit makes professional hard to detect tongue and groove joints. One bit only is required, simply invert second piece of timber for matching joints.

ROUTER BITS

TONGUE AND GROOVE BITS for floor boards C

CARBIDE TIPPED - TWO FLUTES STYLE A - Tongue & Groove Joint

12.7mm (1/2”) SHANK A

TAG 01 B 1/2

C T Min. T Max. in. mm in. mm in. mm in. mm in. mm TGA 100 1/2 1-3/4 44.5 1-5/32 29.4 3-1/8 79 15/32 12 1-9/64 29 PART No.

PART No.

CARBIDE TIPPED - TWO FLUTES STYLE B - Tongue & Groove Joint

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”.

STYLE

TAG 02 B 1/2

CARBIDE TIPPED - TWO FLUTES

TAG 01 B 1/2 TAG 02 B 1/2 TAGC 01 TAGC 02

A B in. mm in. mm 32.4 1 3/64 26.7 1 5/16 33.4 17/64 6.7 CUTTER ONLY – TAG 01 B 1/2 CUTTER ONLY – TAG 02 B 1/2

C in. -

mm 82.5 63.7

Replacement Ball Bearing TB19 Replacement Arbor TA14 (TAG 01 B 1/2) Replacement Arbor TA5 (TAG 02 B 1/2)

A B C T Min. T Max. in. mm in. mm in. mm in. mm in. mm TGB 50 1.180 30 63/64 25 2-1/4 57.1 7/16 11.1 7/8 22.2 TGB 50 1/2 1.180 30 63/64 25 2-1/4 57.1 7/16 11.1 7/8 22.2 TGB 100 1/2 1-3/4 44.4 1-5/32 29.4 3-1/4 82 5/8 15.9 1-1/32 27.8 TGB 200 1/2 1-3/4 44.4 2 50.8 4 102 11/16 17.5 1-15/16 49.2 PART No.

TONGUE AND GROOVE BIT for wall panel

MITRE LOCK BIT Primarily designed for joining material at 90o, however this bit will also produce reasonably strong straight joints. One bit is required. For 900 joins cut second piece of timber at 900 to first piece to produce joint. For straight joints invert the second piece of timber for matching joint.

90° JOINTS

STRAIGHT JOINTS

4 3 2 1

CARBIDE TIPPED - TWO FLUTES

12.7mm (1/2”) SHANK

A B in. mm in. mm TML 60 1/2 2-3/8 60.3 61/64 24.2 PART No.

C in. 3

mm 76

T Min. mm 8.7

T Max. mm 20

Ph: 07 - 3326 1500

STYLE

TTG 10 1/2

To cut matching piece remove slotting cutter and add spacer supplied CARBIDE TIPPED - TWO FLUTES

PART No. TTG 10 1/2 TTGR 10 TTGS 10 TTGC 10 TTGW 10

A in. 1-5/8 1-1/8 1-5/8 1-5/8

B mm 41.3 28.6 41.3 41.3

in. 1

T Min. T Max. mm in. mm in mm in mm 25.4 3-1/8 79.4 15/32 12.0 13/16 20.6 Cutter only (1) 10.5 mm Slot cutter (2) 4.0 mm Bevel cutter (3) 10.8 mm Spacer (4)

Replacement Arbor TA19

JOINTING BIT WOOD THICKNESS MIN.: 10 mm MAX.: 45 mm

CARBIDE TIPPED - TWO FLUTES

12.7mm (1/2”) SHANK PART No.

This bit is very easy to use for quick joining. It gives you the option to create a plain or rebated drawer by varying the depth of cut. WOOD THICKNESS MIN.: 10 mm for X MIN.: 15 mm for Y

TGC 100 1/2

12.7mm (1/2”) SHANK PART No. TGD 35 1/2

in. 1-3/4

B mm 44.4

in. 1-7/8

C mm 47

in. 3-7/8

mm 98

Increases joint strength by increasing glued surface area. Also suitable for solid surface materials.

NEW

Y B

in. .768

REBATE

PLAIN

mm 35

WAVY JOINT BIT

A in. 1-3/8

DRAWER JOINT BIT

CARBIDE TIPPED TWO FLUTES

C mm 19.5

Email: Sales@cltoolcentre.com

Established 1969

in. 2-1/2

mm 63.5

PART No. TWJ 16 1/2

A in. 5/8

B mm 16

in 2-1/64

C mm 51.3

in 4-1/32

mm 102.3

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Established 1969

ROUTER BITS

Email: Sales@cltoolcentre.com

Premium Quality

D O O R PA N E L B I T S FOR BOTH RAIL AND STILE

REVERSIBLE PANEL DOOR BITS

PANEL DOOR BITS The TPD 1B-1/2 and TPD 2-1/2 are manufactured as matched sets in order that the rail and stile fit together as perfect joints. The TPD 1B-1/2 now has a ball bearing guide ensuring simpler set ups for professional results. Arches on your cupboard doors are now much easier to achieve.

1/4"

1-5/8"

B A A ALTERNATIVE USE

PART No. TPDR 10 B 1/2 RAIL STILE

CARBIDE TIPPED - TWO FLUTES W I T H B A LL B E A R I N G G U ID E

STILE

Replacement Ball Bearing TB12 Replacement Grooving Cutter TPDG 9 Replacement Arbor TA 6

PANEL

Perspective View of Panel Door (with one rail removed). PANEL GROOVE: 4 mm

STILE RAIL

CARBIDE TIPPED TWO FLUTES TWO BIT SET

YOUR CHOICE OF ANY COMPLETE PROFILE ASSEMBLIES

12.7mm (1/2â&#x20AC;?) SHANK PART No.

Ph: 07 - 3326 1500

TPD 1 B 1/2 TPD 2 1/2

A mm 55 54

B mm 29 25

C mm 94 76

Wood Thickness M in: 16mm M ax: 20mm

PROFILE

PA R T N U M B E R S COMMON REVERSIBLE PROFILE CUTTER

OGEE

WOOD THICKNESS MIN:20 mm MAX: 25 mm

TPDR 10 B 1/2

TPDC 10

TPDR 11 B 1/2

TPDC 11

TPDR 12 B 1/2

TPDC 12

TPDR 13 B 1/2

TPDC 13

Replacement Ball Bearing TB17.

CLASSICAL

STACKED STILE A RAIL ASSEMBLIES Now you can machine stile and rail with just one bit without having to adjust and switch, reverse or remove the bit from your router. Designed for use in your router table, this bit will machine 16mm to 20mm material. Ball bearing guide allows you to do odd shapes such as arches or cathedral pattern doors. Assembly feature allows any cutter to be removed for economical repair, sharpening, or replacement. Also makes glass door and tongue and groove joints. TWO FLUTE, CARBIDE TIPPED, BALL BEARING GUIDE

TRADITIONAL

1/4"

1- 5/8"

STRAIGHT

PART No. TPDS 11 B 1/2

11mm STEP 1. Cut the Stile

STEP 2. Cut the Rail

Replacement Ball Bearing TB12, Replacement grooving Cutter TPDG 9. Replacement Arbor TA20

Stile and Rail

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

WINDOW SASH & RAIL BITS These two bits work together to produce a complete divided light sash. The TCW 2B 1/2 is used to cope the rails, sash bars, and muntins. The TCW 1B 1/2 cuts the profile on all components. Application: Cuts all composition materials, plywood, hard wood, and soft wood. Use on table mounted portable routers.

R WOOD THICKNESS MIN:16 mm MAX: 20 mm

B 4mm

CARBIDE TIPPED - TWO FLUTES

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”. PART No. TPS 8 B-1 TPS 8 B 1/2-1 TPSG 8

A in. 1-3/8 1-3/8 1-3/8

B mm 35 35 35

in. 17/32 17/32

C mm in. 13.5 2-1/2 13.5 2-7/8 Cutter only

mm 63.5 73

R RADIUS mm 8 8 -

R R B 16mm

R R

Replacement Ball Bearing TB14 Replacement Grooving Cutter - TPSG 8

ROUTER BITS

PANEL DOOR BITS

Premium Quality

PA N E L D O O R & W I N D O W B I T S

A C R B

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”. PART No. TPS 8-2 TPS 8 1/2-2

12.7mm (1/2”) SHANK A A

in. 1-3/8 1-3/8

B mm 35 35

in. 7/8 7/8

PART No.

C mm 22.2 22.2

in. 2-1/4 2-5/8

mm 57.1 67

R RADIUS mm 8 8

TCW 1B 1/2 TCW 2B 1/2 TCW 3

A in. 1.654 1.654 1.654

B mm 42 42 42

in. 1-1/2 .609

C in. mm 3.55 90.1 2.77 70.5 Cutter only

mm 38.1 15.5

R RADIUS in. mm .200 5.08 .200 5.08

Email: Sales@cltoolcentre.com

Established 1969

Replacement Ball Bearing TB12

RAISED PANEL BITS

This bit produces an Ogee Fillet on panel doors and draw fronts.

PANEL BITS WIDE FLAT BOTTOM

Specially designed for grooving panel doors. Bevel

12.7mm 1/2” SHANK in. TOG 57 B 1/2 2-1/4 TOG 67 B 1/2 2-1/4

A2 A1 CARBIDE TIPPED - TWO FLUTES

A A

PART No.

B mm 57 57

in. 41/64 41/64

C mm 16.3 16.3

in. 3 3

mm 76 76

16.3

2-3/4

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”. BEARING No. TB11 TB9

Also available without Ball Bearing

TOG 57 1/2

2-1/4

41/64

NO BEARING

ELLIPTICAL BEADING BITS WIDE FLAT BOTTOM R

12.7mm (1/2”) SHANK

TE 808 1/2 TE 812 1/2

B in. 7/16 9/16

C mm 11 14.2

in. 3/8 3/8 1/2 1/2

A2 mm 9.5 9.5 12.7 12.7

B in. mm 7/16 11 7/16 11 9/16 14.3 9/16 14.3

C in. 1-5/8 2-1/8 1-13/16 2-5/16

mm 41 54 46 58.5

BEVEL 25° 25° 25° 25°

This bit is used for panel doors and other decorative edges.

CARBIDE TIPPED - TWO FLUTES

A in. mm 1-13/64 30.5 1-1/4 31.8

A1 in. mm TPD 25 1 25.4 TPD 25 1/2 1 25.4 TPD 50 1.575 40 TPD 50 1/2 1.575 40 PART No.

RAISED PANEL BIT C

Specially designed for grooving panel doors.

PART No.

CARBIDE TIPPED - TWO FLUTES

Ph: 07 - 3326 1500

R A I S E D PA N E L D O O R B I T S

in. 2-7/16 2-9/16

mm 62 65

B A R RADIUS in. mm 3/8 9.5 3/8 9.5

Bevel

CARBIDE TIPPED - TWO F L U T E S W I TH B A L L B E A R I NG G U I D E

12.7mm (1/2”) SHANK A1 in. mm TRP 40 B 1/2 1-5/8 40 PART No.

A1 A2 in. 1/8

B mm 3.2

in. 1/2

C mm in. mm 12.7 2-5/8 67

BEVEL 25°

Replacement Ball Bearing TB11.

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ROUTER BITS

Email: Sales@cltoolcentre.com

Premium Quality

Established 1969

R A I S E D PA N E L B I T S RAISED PANEL BITS

VERTICAL RAISED PANEL BIT

Also available with a ball bearing guide.

CARBIDE TIPPED TWO FLUTES

TPD 3 1/2 TPD 3 B 1/2

12.7mm (1/2”) SHANK PART No.

CARBIDE TIPPED - TWO FLUTES

A in. 2.83 2.83

B mm 72 72

in. 3/4 3/4

12.7mm (1/2”) SHANK

C mm 19.0 19.0

in. 2-3/4 3

mm 70 76

PART No. TPDV 3 1/2

A in. 1.36

B mm 34.5

in. 1.7

C mm 43

in. 3-5/8

mm 92

Replacement Ball Bearing TB11.

RAISED PANEL BITS

VERTICAL RAISED PANEL BIT

Also available with a ball bearing guide.

12.7mm (1/2”) SHANK

TPD 4 1/2 TPD 4 B 1/2

CARBIDE TIPPED TWO FLUTES

PART No.

A A

CARBIDE TIPPED - TWO FLUTES

A in. 2-3/8 2-3/8

B mm 60.3 60.3

in. 11/16 11/16

12.7mm (1/2”) SHANK

C mm 17.3 17.3

in. 2-5/8 -

mm 66.8 72.1

Replacement Ball Bearing TB11.

RAISED PANEL BITS

PART No. TPDV 4 1/2

A in. 1-1/8

B mm 28.6

in. 1-1/2

C mm 38.1

in. 3-1/3

mm 89

VERTICAL RAISED PANEL BIT

Also available with a ball bearing guide.

Ph: 07 - 3326 1500

CARBIDE TIPPED TWO FLUTES

12.7mm (1/2”) SHANK PART No. TPD 5 1/2 TPD 5 B 1/2

CARBIDE TIPPED - TWO FLUTES

A in. 3 3

B mm 76.2 76.2

in. 5/8 5/8

12.7mm (1/2”) SHANK

C mm 15.9 15.9

in. 2-3/4 2-3/4

mm 70 70

PART No. TPDV 5 1/2

A in. 1-1/4

B mm 31.8

in. 1-1/2

C mm 38.1

in. 3-1/3

mm 89

Replacement Ball Bearing TB11.

RAISED PANEL BITS

VERTICAL RAISED PANEL BIT

Also available with a ball bearing guide. CARBIDE TIPPED TWO FLUTES

12.7mm (1/2”) SHANK B

CARBIDE TIPPED - TWO FLUTES

PART No. TPD 6 1/2 TPD 6 B 1/2

A in. 3 3

B mm 76 76

Replacement Ball Bearing TB11.

in. 5/8 5/8

mm 15.9 15.9

in. 2-3/4 3

12.7mm (1/2”) SHANK

C mm 70 76

PART No. TPDV 6 1/2

A in. 1-1/8

B mm 28.6

in. 2

C mm 50.8

in. 3-7/8

mm 98

ASSEMBLIES

By using the guide on your routing machine, the maximum depth of cut can be obtained.

Ball bearing guide eliminates the cumbersome and time consuming job of setting up router machine guides.

B 50.8mm 14.4 mm max depth

CARBIDE TIPPED - TWO FLUTES WITH BALL BEARING GUIDE

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

CARBIDE TIPPED - TWO FLUTES

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” PART No. B A

CARBIDE TIPPED - TWO FLUTES

CUTTER BORE 8mm (5/16”) PART No. T 500-1.6 M T 500-2 M T 500-2.5 M T 500-2.8 M T 500-3.2 M T 500-3.6 M T 500-4 M T 500-4.8 M T 500-5.5 M T 500-6.4 M T 500-8.0 M

A in. 2 2 2 2 2 2 2 2 2 2 2

B mm 50.8 50.8 50.8 50.8 50.8 50.8 50.8 50.8 50.8 50.8 50.8

in. 1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16

mm 1.6 2 2.5 2.8 3.2 3.6 4 4.8 5.5 6.35 8

• •

TA 500-1.6 M TA 500-1.6 M 1/2 TA 500-2 M TA 500-2 M 1/2 TA 500-2.5 M TA 500-2.5 M 1/2 TA 500-2.8 M TA 500-2.8 M 1/2 TA 500-3.2 M TA 500-3.2 M 1/2 TA 500-3.6 M TA 500-3.6 M 1/2 TA 500-4 M TA 500-4 M 1/2 TA 500-4.8 M TA 500-4.8 M 1/2 TA 500-5.5 M TA 500-5.5 M 1/2 TA 500-6.4 M TA 500-6.4 M 1/2 TA 500-8 M TA 500-8 M 1/2

B in. 1/16 1/16 5/64 5/64 3/32 3/32 7/64 7/64 1/8 1/8 9/64 9/64 5/32 5/32 3/16 3/16 7/32 7/32 1/4 1/4 5/16 5/16

mm 1.6 1.6 2 2 2.5 2.5 2.8 2.8 3.2 3.2 3.6 3.6 4 4 4.8 4.8 5.5 5.5 6.4 6.4 8 8

PART No.

ARBOR TA 15 TA 16 TA 15 TA 16 TA 15 TA 16 TA 15 TA 16 TA 15 TA 16 TA 15 TA 16 TA 15 TA 16 TA 15 TA 16 TA 15 TA 16 TA 15 TA 16 TA 17 TA 18

• •

B A CARBIDE TIPPED - FOUR FLUTES

CUTTER BORE 8 mm (5/16”) TX SERIES: BORE 12.7 mm (1/2”) PART No. T 700-1.6 M T 700-2 M T 700-2.5 M T 700-2.8 M T 700-3.2 M T 700-3.6 M T 700-4 M T 700-4.8 M T 700-5.5 M T 700-6.4 M T 700-8.0 M TX 700-4.8 M TX 700-5.5 M TX 700-6.4 M TX 700-8 M

A in. 2 2 2 2 2 2 2 2 2 2 2 3-5/32 3-5/32 3-5/32 3-5/32

B mm 50.8 50.8 50.8 50.8 50.8 50.8 50.8 50.8 50.8 50.8 50.8 80 80 80 80

in. 1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/16 7/32 1/4 5/16

mm 1.6 2 2.5 2.8 3.2 3.6 4 4.8 5.5 6.35 8 4.8 5.5 6.35 8

• •

TA 700-1.6 M TA 700-1.6 M 1/2 TA 700-2 M TA 700-2 M 1/2 TA 700-2.5 M TA 700-2.5 M 1/2 TA 700-2.8 M TA 700-2.8 M 1/2 TA 700-3.2 M TA 700-3.2 M 1/2 TA 700-3.6 M TA 700-3.6 M 1/2 TA 700-4 M TA 700-4 M 1/2 TA 700-4.8 M TA 700-4.8 M 1/2 TXA 700-4.8 M 1/2 TA 700-5.5 M TA 700-5.5 M 1/2 TXA 700-5.5 M 1/2 TA 700-6.4 M TA 700-6.4 M 1/2 TXA 700-6.4 M 1/2 TA 700-8 M TA 700-8 M 1/2 TXA 700-8 M 1/2

B mm 1.6 1.6 2 2 2.5 2.5 2.8 2.8 3.2 3.2 3.6 3.6 4 4 4.8 4.8 4.8 5.5 5.5 5.5 6.4 6.4 6.4 8 8 8

50.8mm 14.4 mm max depth CARBIDE TIPPED FOUR FLUTES WITH BALL BEARING GUIDE TX CUTTERS: MAX DEPTH 29mm WIDTH 80mm.

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” in. 1/16 1/16 5/64 5/64 3/32 3/32 7/64 7/64 1/8 1/8 9/64 9/64 5/32 5/32 3/16 3/16 3/16 7/32 7/32 7/32 1/4 1/4 1/4 5/16 5/16 5/16

TA 4 TA 5 TA 4 TA 5 TA 4 TA 5 TA 4 TA 5 TA 4 TA 5 TA 4 TA 5 TA 4 TA 5 TA 4 TA 5 TA 4 TA 5 TA 4 TA 5 TA 1 TA 3

Four flute bits with ball bearing guide produce an accurate and professional job with minimum set up time.

CARBIDE TIPPED - FOUR FLUTES TX CUTTERS: MAX DEPTH 30mm WIDTH 80mm.

PART No.

ARBOR

ASSEMBLIES

Bits without bearings can be used where the bearing and nut interfere with the work piece configuration.

Four flute cutters are used for extra smooth cutting and smoother finishes with longer tool life between sharpenings.

mm 1.6 1.6 2 2 2.5 2.5 2.8 2.8 3.2 3.2 3.6 3.6 4 4 4.8 4.8 5.5 5.5 6.4 6.4 8 8

Replacement Ball Bearing TB12.

ASSEMBLIES

SLOTTING CUTTER ONLY

TA 500-1.6 MB TA 500-1.6 MB 1/2 TA 500-2 MB TA 500-2 MB 1/2 TA 500-2.5 MB TA 500-2.5 MB 1/2 TA 500-2.8 MB TA 500-2.8 MB 1/2 TA 500-3.2 MB TA 500-3.2 MB 1/2 TA 500-3.6 MB TA 500-3.6 MB 1/2 TA 500-4 MB TA 500-4 MB 1/2 TA 500-4.8 MB TA 500-4.8 MB 1/2 TA 500-5.5 MB TA 500-5.5 MB 1/2 TA 500-6.4 MB TA 500-6.4 MB 1/2 TA 500-8.0 MB TA 500-8.0 MB 1/2

B in. 1/16 1/16 5/64 5/64 3/32 3/32 7/64 7/64 1/8 1/8 9/64 9/64 5/32 5/32 3/16 3/16 7/32 7/32 1/4 1/4 5/16 5/16

Email: Sales@cltoolcentre.com

Replacement and additional cutters can be purchased singularly for economy where you have an existing arbor.

ASSEMBLIES

ROUTER BITS

SLOTTING CUTTER ONLY

Premium Quality

SLOTTING CUTTERS & ASSEMBLIES

Ph: 07 - 3326 1500

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”

ARBOR

PART No.

TA 15 TA 16 TA 15 TA 16 TA 15 TA 16 TA 15 TA 16 TA 15 TA 16 TA 15 TA 16 TA 15 TA 16 TA 15 TA 16 TA 8 TA 15 TA 16 TA 8 TA 15 TA 16 TA 8 TA 17 TA 18 TA 8

TA 700-1.6 MB TA 700-1.6 MB 1/2 TA 700-2 MB TA 700-2 MB 1/2 TA 700-2.5 MB TA 700-2.5 MB 1/2 TA 700-2.8 MB TA 700-2.8 MB 1/2 TA 700-3.2 MB TA 700-3.2 MB 1/2 TA 700-3.6 MB TA 700-3.6 MB 1/2 TA 700-4 MB TA 700-4 MB 1/2 TA 700-4.8 MB TA 700-4.8 MB 1/2 TXA 700-4.8 MB 1/2 TA 700-5.5 MB TA 700-5.5 MB 1/2 TXA 700-5.5 MB 1/2 TA 700-6.4 MB TA 700-6.4 MB 1/2 TXA 700-6.4 MB 1/2 TA 700-8 MB TA 700-8 MB 1/2 TXA 700-8 MB 1/2

• •

B in. 1/16 1/16 5/64 5/64 3/32 3/32 7/64 7/64 1/8 1/8 9/64 9/64 5/32 5/32 3/16 3/16 3/16 7/32 7/32 7/32 1/4 1/4 1/4 5/16 5/16 5/16

mm 1.6 1.6 2 2 2.5 2.5 2.8 2.8 3.2 3.2 3.6 3.6 4 4 4.8 4.8 4.8 5.5 5.5 5.5 6.4 6.4 6.4 8 8 8

ARBOR TA 4 TA 5 TA 4 TA 5 TA 4 TA 5 TA 4 TA 5 TA 4 TA 5 TA 4 TA 5 TA 4 TA 5 TA 4 TA 5 TA 7 TA 4 TA 5 TA 7 TA 4 TA 5 TA 7 TA 1 TA 3 TA 7

Replacement Ball Bearing TB12.

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ROUTER BITS

CARB-I-TOOL ROUTER BIT KITS 5 Router Bits, presented in a sturdy, handled, plastic carry case. The Bits are secured in a multi-holed foam compound tray which can hold up to 21x1/4” Shank Bits and 12 x1/2” Shank Bits. Storage Box only Part No. TRBS 500.

1/4” SHANK KIT

1/2” SHANK KIT

PART NO. TRBS 20 1/4 PART No.

Description

T219M TS8016B T508B T1712B T916B

19mm Diam 1/2" Diam 1/4" Rad 3/8" Rebate 45˚Chamfer

PART NO. TRBS 30 1/2

Catalogue Page No. 7 10 19 22 22

Straigh t B it Flush Tr imming Bit Rounding Over Bit Rebating Bit Chamfer Bit

PART No.

Description

T1413M T8016B 1/2 T512B 1/2 T1712B 1/2 T916B 1/2

13mm Diam 1/2" Diam 3/8" Rad 3/8" Rebate 45˚Chamfer

Catalogue Page No. 7 10 19 22 22

BEARINGS, COLLETS, ARBORS & KEYS BALL BEARINGS

ARBORS

CARE OF BEARINGS: All bearings should be kept free of dust and dirt. They should be cleaned in glue solvent and lightly oiled after each use. PART No. TB2 TB3 TB4 TB5 TB6 TB7 TB8 TB9 TB10 TB11 TB12 TB13 TB14 TB15 TB16 TB17 TB18 TB19 TB20 TB21

Ph: 07 - 3326 1500

Email: Sales@cltoolcentre.com

Premium Quality

Established 1969

OD in. 3/8 3/4 3/4 1/4 1/2 5/8 3/8 3/8 1/2 0.866 0.945 5/8 13/16 3/4 1.102 1-1/8 3/4 -

mm 9.5 28 19 19 6.35 12.7 15.9 9.5 9.5 12.7 22 24 15.9 20.6 19 28 28.6 19 24 35

in. 1/8 23/64 5/32 7/64 3/16 3/16 1/8 5/32 3/16 .275 5/16 3/16 19/64 9/32 5/16 5/16 -

NEW PART No.

ID mm 3.2 9 4 6 2.7 4.8 4.8 3.2 4 4.8 6.9 8 4.8 7.6 7.1 8 8 6 5 11

in. 1/4 5/16 1/2 1/8 1/4 3/16 3/16 1/8 3/16 5/16 5/16 1/4 1/4 1/4 0.472 1/2 5/16 -

mm 6.35 8 12.7 6 3.2 6.35 4.8 4.8 3.2 4.8 8 8 6.35 6.35 6.35 12 12.7 8 15 15

•

PART No.

TBT19 has a bevelled smooth surface. All other bearings have a straight surface (as illustrated). BRG ASSEMBLY No. TBT19 TBT20 TBT21 TBT22

ALLEN KEYS

BRG. USED TB7 TB7 TB14 TB14

OD in. 3/4 5/8 3/4 7/8

mm 19 15.9 19 22.2 PART No. TK1 TK2 TK3 TK4 TK5 TK6

in. 15/64 15/64 15/64 15/64

ID mm 6 6 6 6

in. 1/4 1/4 1/4 1/4

A2 A1 A1

in. 1/4 1/2 1/4 1/2 1/2 1/2 1/4 1/4 1/4 1/2 1/2 1/2 1/2

mm 6.35 12.7 6.35 12.7 12.7 12.7 6.35 6.35 6.35 12.7 12.7 12.7 12.7

A2 in. mm 0.315 8 0.315 8 0.315 8 0.315 8 0.315 8 1/2 12.7 1/4 6.35 .295 7.5 0.315 8 0.315 8 0.315 8 1/2 12.7 5/8 16

B in. 7/8 7/8 .760 .760 1-1/4 .950 1-1/8 5/8 1-1/2 1-29/64 1-25/69 1-3/4 2.07

mm 22.2 22.2 19.3 19.3 31.8 24.1 28.8 15.9 38.1 37 50 44.4 52.5

C in. 2-3/8 2-5/8 2.260 2.510 3.100 3.100 2-3/8 2.062 3 3-5/16 2 3-5/8 3-25/32

• • • •

TA8 TA11 TA15 TA16 TA17 TA18 TA22 TA24 TA25 TA26

A1 in. 1/2 1/4 1/4 1/2 1/4 1/2 1/2 1/2 1/4 1/2

mm 12.7 6.35 6.35 12.7 6.35 12.7 12.7 12.7 6.35 12.7

A2 in. mm 1/2 12.7 .295 7.5 0.315 8 0.315 8 0.315 8 0.315 8 5/8 16 5/8 16

B in. 3/32 0.030 0.030 0.030 0.120 0.120 0.33 0.33

mm 2.4 0.8 0.8 0.8 3 3 8.5 8.5

C in. 2.250 1.465 1-7/8 1.780 1.825 1.870 3 25/32 3 25/32 2 45/64 2 45/64

COLLETS

OD B

TA1 TA3 TA4 TA5 TA6 TA7 TA9 TA10 TA13 TA19 TA20 TA21 TA23

mm 6.35 6.35 6.35 6.35

ACROSS FLATS in. mm 3/32 5/32 1.5 2.0 2.5 3.0

mm 60 67 57.4 63.7 78.7 78.7 60 52.4 76 84 100 92 96

TA 22 12/32 NEF Thread TA 24 1/4 UNF Thread

Also available a range of: shielded bearings, see page 22. rubber sealed bearings, see page 43

CARBI-SMOOTH BEARING ASSEMBLIES

TC3 suits Makita Trimmer model 3700B.

PART No. TC1 TC2 TC3 TC4 TCM2 TCM3 TCM4

OD in. 1/2 1/2 1/2 1/4 1/4 1/4

ID (BORE) mm 12.7 12.7 11.0 12.7 6.35 6.35 6.35

in. 1/4 3/8 1/4 1/4 – – –

mm 6.35 9.5 6.35 6.35 2 3 4

STYLE STRAIGHT STRAIGHT CONE STEPPED STRAIGHT STRAIGHT STRAIGHT

mm 57.1 37.2 47 45.2 46.4 47.5 96 96 68.5 68.5

Established 1969

THROUGH BORING DRILLS

HINGE BORING DRILLS For multi spindle machines. Suitable for Bench Press and secured Hand Drill. Not suitable for portable routing machines.

For multi spindle machines. Suitable for Bench Press and secured Hand Drill. Not suitable for portable routing machines. CARBIDE TIPPED

RIGHT HAND PART No. WDT5R70 WDT8R70

LEFT HAND PART No. WDT5L70 WDT8L70

CARBIDE TIPPED

mm 5 8

mm 35 35

mm 70 70

RIGHT HAND

LEFT HAND

PART No.

10mm diameter shank x 26mm long with adjusting screw.

PART No.

WD25R56 WD25R70 WD30R56 WD30R70 WD35R56 WD35R70

WD25L56 WD25L70 WD30L56 WD30L70 WD35L56 WD35L70

mm 25 25 30 30 35 35

mm 56 70 56 70 56 70

WOOD BORING DRILLS

DOWEL DRILLS For multi spindle machines. Suitable for Bench Press and secured Hand Drill. Not suitable for portable routing machines. CARBIDE TIPPED

PART No. WD3R56 WD3R70 WD4R56 WD4R70 WD5R56 WD5R70 WD6R56 WD6R70 WD6.5R56 WD6.5R70 WD8R56 WD8R70 WD9R56 WD9R70 WD9.5R56 WD9.5R70 WD10R56 WD10R70 WD11R56 WD11R70 WD12R56 WD12R70 WD15R56 WD15R70

LEFT HAND PART No. WD3L56 WD3L70 WD4L56 WD4L70 WD5L56 WD5L70 WD6L56 WD6L70 WD6.5L56 WD6.5L70 WD8L56 WD8L70 WD9L56 WD9L70 WD9.5L56 WD9.5L70 WD10L56 WD10L70 WD11L56 WD11L70 WD12L56 WD12L70 WD15L56 WD15L70

mm 3 3 4 4 5 5 6 6 6.5 6.5 8 8 9 9 9.5 9.5 10 10 11 11 12 12 15 15

mm 18 18 20 27 27 35 27 35 27 35 27 35 27 35 27 35 27 35 27 35 27 35 27 35

mm 56 70 56 70 56 70 56 70 56 70 56 70 56 70 56 70 56 70 56 70 56 70 56 70

HINGE BORING DRILLS For Bench Press and secured Hand Drill. High quality two flute drill with two scribing teeth produces cleanly cut hole. Not suitable for portable routing machines

CARBIDE TIPPED

RIGHT HAND PART No.

10mm diameter shank x 27mm long (56mm) or 35mm long (70mm) with adjusting screw in end.

TH 20 1/2 TH 25 3/8 TH 25 1/2 TH 30 1/2 TH 32 1/2 TH 35 3/8 TH 35 1/2 TH 40 1/2 TH 50 1/2

A mm 20 25 25 30 32 35 35 40 50

C mm 63.5 57.2 63.5 63.5 63.6 67 67 67 67

Ph: 07 - 3326 1500

RIGHT HAND

10mm diameter shank x 26mm long with adjusting screw.

TOY WHEEL CUTTERS This bit gives the perfect wheel shape for toy making. Available in 3 sizes with a 6mm interchangeable drill. Recommended for use in Bench or secured Hand Drills. (Not suitable for routing machines)

ADJUSTABLE HINGE BORING BIT (TCT) Adjusts from 20mm-50mm width. Ideal for deep repetitive holes up to 75mm in depth. For bench drill or secured portable hand drill only. These bits are not suitable for portable router machines.

C CARBIDE TIPPED - TWO FLUTES

12.7mm (1/2”) SHANK

CARBIDE TIPPED - TWO FLUTES

10mm (3/8”) SHANK PART No. TAHB 50

A mm 22.5 - 48

B B mm 11

C mm 97

Email: Sales@cltoolcentre.com

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

PART No. TWCH 40 1/2 TWCH 50 1/2 TWCH 60 1/2

A mm 40 50 60

B mm 6.3 7 8

C mm 90 92 92

see also Expansion Bits page 55

ROUTER BITS

Email: Sales@cltoolcentre.com

Premium Quality

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

REPLACEABLE INSERT ROUTER BITS

Replaceable Insert

ROUTER BITS

STRAIGHT BITS

TWO FLUTES TWO FLUTE

All sizes in millimetres

Part No.

INSERT NO.

R 1912

6.35

PL 12 12 1.5

R 1912 1/2

12.7

PL 12 12 1.5

STRAIGHT BITS

TWO FLUTES

Ph: 07 - 3326 1500

TWO FLUTE

• Use End Cutting Inserts for Rebating and Grooving. • Supplied with End Cutting Inserts when New.

All sizes in millimetres

Part No.

R 1830 1/2 R 1830 .16 R 1840 1/2 R 1930 1/2 R 1930 .16 R 1940 1/2 R 1950 1/2 -2 R 2030 1/2 R 2030 16 R 2040 1/2 R 2040 16

18 18 18 19 19 19 19 20 20 20 20

30 30 40 30 30 40 50 30 30 40 40

75 75 80 75 75 84 94 85 85 85 85

12.7 16.0 12.7 12.7 16 12.7 12.7 12.7 16 12.7 16

STRAIGHT BITS

TWO FLUTES TWO FLUTE

Note: 3 Hole Fixing. (3 Hole Inserts used for greater support.)

INSERT NO. PL 29.5 12 1.5 EC PL 29.5 12 1.5 EC PL 39.5 12 1.5 EC PL 29.5 12 1.5 EC PL 29.5 12 1.5 EC PL 39.5 12 1.5 EC PL 49.5 12 1.5 EC PL 29.5 12 1.5 EC PL 29.5 12 1.5 EC PL 39.5 12 1.5 EC PL 39.5 12 1.5 EC

All sizes in millimetres

Part No.

R 1850 1/2 -3 R 1950 1/2 -3 R 1950 .16 -3

18 19 19

50 50 50

94 94 94

12.7 12.7 16

INSERT NO. PL 50 12 1.7 EC PL 50 12 1.7 EC PL 50 12 1.7 EC

• Use End Cutting Inserts for Rebating and Grooving. • Supplied with End Cutting Inserts when new.

NOTE: Part No’s include cutter bodies complete with Inserts, Screws and Torx Key. Bearing if applicable. End Cutting Inserts, have End Cutting Clearance.

ONE BEARING

TWO FLUTES

TWO FLUTE

All sizes in millimetres

Part No.

INSERT NO.

R 1912 B R 1912 B 1/2

19 19

12 12

57 65

6.35 12.7

PL 12 12 1.5 PL 12 12 1.5

Replacement bearing TB-5

FLUSH TRIMMING BITS

DOUBLE BEARING TWO FLUTE

TWO FLUTES All sizes in millimetres

Part No.

INSERT NO.

R 1912 BB R 1912 BB 1/2

19 19

12 12

61 69

6.35 12.7

PL 12 12 1.5 PL 12 12 1.5

ROUTER BITS

FLUSH TRIMMING BITS

Premium Quality

REPLACEABLE INSERT ROUTER BITS

Replacement bearing TB-5

FLUSH TRIMMING BITS

ONE BEARING TWO FLUTE

TWO FLUTES All sizes in millimetres

Part No.

INSERT NO.

R 1930 B 1/2 R 1940 B 1/2

19 19

30 40

82 93

12.7 12.7

PL 30 12 1.5 PL 40 12 1.5

Replacement bearing TB-5

FLUSH TRIMMING BITS

DOUBLE BEARING TWO FLUTE

TWO FLUTES All sizes in millimetres

Part No.

INSERT NO.

R 1930 BB 1/2 R 1940 BB 1/2

19 19

30 40

93 105

12.7 12.7

PL 30 12 1.5 PL 40 12 1.5

Email: Sales@cltoolcentre.com

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Replacement bearing TB-5

ONE BEARING TWO FLUTE

TWO FLUTES All sizes in millimetres

Part No.

R 1950 B 1/2 -3

100

12.7

INSERT NO. PL 50 12 1.7 E/C

Ph: 07 - 3326 1500

FLUSH TRIMMING BITS

NOTE: 3 Hole Fixing. 3 Hole Inserts used for greater support. Replacement bearing TB-5

INVERTED FLUSH TRIMMING BITS

TWO FLUTES TWO FLUTE

1.6mm

Part No. RV 1930 B 1/2 RV 1940 B 1/2 RV 2440 B 1/2 RV 2830 B 1/2 RV 2840 B 1/2 RV 2850 B 1/2 -2

All sizes in millimetres D

INSERT NO.

REPLACE. BEARINGS

19.05 19.05 24.0 28.6 28.6 28.6

30 40 40 30 40 50

78 88 88 78 88 98

12.7 12.7 12.7 12.7 12.7 12.7

PL 29.5 12 1.5 EC PL 39.5 12 1.5 EC PL 39.5 12 1.5 EC PL 29.5 12 1.5 EC PL 39.5 12 1.5 EC PL 49.5 12 1.5 EC

TB-4 TB-4 TB-20 TB-18 TB-18 TB-18

Supplied with End Cutting Inserts when new. Retaining Ring TZR 3

INVERTED FLUSH TRIMMING BITS 1.6mm

TWO FLUTES TWO FLUTE Part No. RV 1950 B 1/2 -3 RV 2450 B 1/2 -3

All sizes in millimetres D

19.05 24

50 50

98 98

INSERT NO.

12.7 PL 50 12 1.7 EC 12.7 PL 50 12 1.7 EC

REPLACE. BEARINGS

TB-4 TB-20

Retaining Ring TZR 3

NOTE: Part No’s include cutter bodies complete with Inserts, Screws and Torx Key. Bearing if applicable. End Cutting Inserts, have End Cutting Clearance.

Established 1969

REPLACEABLE INSERT ROUTER BITS

Premium Quality

ROUTER BITS

Email: Sales@cltoolcentre.com

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

STRAIGHT BITS

SINGLE FLUTE SINGLE FLUTE

* • Use End Cutting Inserts for Plunging and Trenching • Supplied with End Cutting Inserts when new.

* * * * * * * *

Part No. RS 1230 1/2 RS 12.730 1/2 RS 1430 1/2 RS 1630 1/2 RS 1640 1/2 RS 1640 16 RS 1830 1/2 RS 1930 1/2 RS 1940 1/2 RS 1940 16 RS 2030 1/2 RS 2040 1/2 RS 2040 16

D 12 12.7 14 16 16 16 18 19 19 19 20 20 20

All sizes in millimetres B 30 30 30 30 40 40 30 30 40 40 30 40 40

SINGLE FLUTE

* * • Use End Cutting Inserts for Plunging and Trenching • Supplied with End Cutting Inserts when new.

Part No. RSP 12.7 30 1/2 RSP 16 40 1/2

D 12.7 16

L 75 75 75 85 85 85 85 85 85 85 85 85 85

d 12.7 12.7 12.7 12.7 12.7 16 12.7 12.7 12.7 16 12.7 12.7 16

INSERT NO. PL 29.5 9 1.5 PL 29.5 9 1.5 PL 29.5 9 1.5 PL 29.5 12 1.5 PL 39.5 12 1.5 PL 39.5 12 1.5 PL 29.5 12 1.5 PL 29.5 12 1.5 PL 39.5 12 1.5 PL 39.5 12 1.5 PL 29.5 12 1.5 PL 39.5 12 1.5 PL 39.5 12 1.5

All sizes in millimetres B 30 40

L 85 90

d 12.7 12.7

INSERT NO. PL 29.5 9 1.5 EC PL 29.5 9 1.5 EC

These tools will be deleted from the range once current stocks are sold

22o BEVEL TRIMMING BITS

TWO FLUTES TWO FLUTE

All sizes in millimetres

Part No.

INSERT NO.

R 22 B R 22 B 1/2

19 19

12 12

54 58

6.35 12.7

PL 12 12 1.5 PL 12 12 1.5

Replacement bearing TB-5

Ph: 07 - 3326 1500

45o BEVEL TRIMMING BITS

TWO FLUTES TWO FLUTE

All sizes in millimetres

Part No.

INSERT NO.

R 45 B R 45 B 1/2

19 19

12 12

54 58

6.35 12.7

PL 12 12 1.5 PL 12 12 1.5

Replacement bearing TB-5

VEE GROOVE BITS

SINGLE FLUTE All sizes in millimetres

B D

d L

INSERT NO.

RVG 91 1/2

12.7

PL 12 12 1.5

All sizes in millimetres D

Part No.

Cuts included angle of 91˚

Part No.

RVG 90 1/2

15.5

12.7

INSERT NO. PLR 20 12

Cuts included angle of 90˚

NOTE: Part No’s include cutter bodies complete with Inserts, Screws and Torx Key. Bearing if applicable. End Cutting Inserts, have End Cutting Clearance.

EC EC EC EC EC EC EC EC EC EC EC EC EC

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ROUTER BITS

SURFACE PLANERS

FOR USE ONLY IN SECURELY MOUNTED MACHINES. CARE SHOULD BE TAKEN WITH SPEED SELECTION.

Premium Quality

REPLACEABLE INSERT ROUTER BITS

3 Flute

4 Flute

All sizes in millimetres

Part No.

INSERT NO.

Part No.

INSERT NO.

R3 5512 1/2

12.7

PL 12 12 1.5

R4 8012 16M R4 8012 20M

80 80

12 12

83 83

16 20

PL 12 12 1.5 PL 12 12 1.5

M U LT I - S H A P E P R O F I L E B I T Use the standard range of shapes available or custom design your own shape.

Email: Sales@cltoolcentre.com

Established 1969

INSERTS

RMST 201 RMST 202 RMST 203 RMST 204 RMST 205 RMST 206 RMST 207

B B1 B2 R chmf D mm mm mm mm mm 9.52 9.52 5.9 3.5 5.9 6.6 5.0 6.6 7.0 3.5 7.0 10.45 6.01 35˚ 8.58 5.0 2.5 6.6 5.5 11.68 6.7

(Blank Insert onto which a profile can be ground NB. These blanks will not fit onto the body until ground) Tip Thickness 2mm

Ph: 07 - 3326 1500

PART No.

TOOL (WITHOUT INSERTS) D mm 30

PART No. RMS 200 1/2

B mm 20

L mm 75

d mm 12.7

Replacement Insert – 20 x 12 x 2.0 Replacement Screw – M4 Replacement Torx Key – T15

d R

R 1.00

RMST 301

RMST 302

RMST 303

RMST 304

INSERTS B B1 B2 R chmf mm mm mm mm RMST 301 11.8 7 RMST 302 11 23.35 RMST 303 19.25 13.61 45˚ RMST 304 11 5 PART No.

D mm 11.8 13.47 13.61 13.2

RMS 300 1/2 RMS 300 16

D mm 46 46

RMSTB 30202

TOOL (WITHOUT INSERTS) PART No.

(Blank Insert onto which a profile can be ground NB. These blanks will not fit onto the body until ground) Tip Thickness 2mm

B mm 30 30

L mm 90 90

d mm 1/2 16

Replacement Insert – 30 x 20 x 2.0 Replacement Screw – M4 Replacement Torx Key – T15

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Established 1969

ROUTER BITS

Email: Sales@cltoolcentre.com

Premium Quality

INDEXABLE INSERTS Part No. 35º

PL 7.65 12 1.5 PL 9 12 1.5 PL 15 12 1.5 PL 20 12 1.5

ØD

L 7.65 9 15 20

Part No.

W C L

PL 25 12 1.5 PL 30 12 1.5 PL 40 12 1.5 PL 50 12 1.5 PL 60 12 1.5 PL 80 12 2.2 PL 100 12 2.2

35º

ØD

35º W

Part No.

ØD

PL 12 12 1.5

30º W

Part No.

ØD

PL 14 14 1.5 PL 14 14 2

L 25 30 40 50 60 80 100

W 12 12 12 12

Dimensions, mm T A 1.5 2 1.5 2 1.5 2 1.5 2 Dimensions, mm T A 1.5 2 1.5 2 1.5 2 1.5 2 1.5 2 2.2 2 2.2 2

W 12 12 12 12 12 13 13

ØD 4 4 4 4 ØD 4 4 4 4 4 4 4

C 14 14 26 26 26 26 26

L 12

W 12

Dimensions, mm T A 1.5 4

ØD 4

L 14 14

W 14 14

Dimensions, mm T A 1.2 4 2 4

ØD 8.5 6.5

L 19.5

W 12

Dimensions, mm T A 1.5 4

ØD 4

35º ØD

Part No. T

PL 19.5 12 1.5 EC Part No.

15º

W C L

ØD

PL 29.5 9 1.5 EC PL 29.5 12 1.5 EC PL 39.5 9 1.5 EC PL 39.5 12 1.5 EC PL 49.5 12 1.5 EC PL 59.5 12 1.5 EC

35º

T 35º W

W 9 12 9 12 12 12

Dimensions, mm T A 1.5 4 1.5 4 1.5 4 1.5 4 1.5 4 1.5 4

ØD 4 4 4 4 4 4

C 14 14 26 26 26 26

L 50

W 12

Dimensions, mm T A 1.7 4

ØD 4

C 37

ØD

Part No.

C L

Ph: 07 - 3326 1500

L 29.5 29.5 39.5 39.5 49.5 59.5

PL 50 12 1.7 EC

20º 35º

Part No.

ØD

PLR 20 12

L 20

W 12

Dimensions, mm T A 1.5 2

ØD 4

L n/a

W 22

Dimensions, mm T A 2 3

ØD 6.5

L 18

W 18

Dimensions, mm T A 1.95 4

ØD 10.3

30º

Part No.

ØD

PLT 22 T

Part No.

ØD

PLS 18 EC = End Cut

A = Number of cutting edges

REPLACEABLE INSERTS & PARTS FOR REPLACEMENT INSERT ROUTER BITS REPLACEMENT PARTS DESCRIPTION Torx Key Torx Key Torx Head Screw Torx Head Screw Torx Head Screw Bearing Screw Replacement Bearing Replacement Bearing

NOTE Part No.

All bits prefix RSP All other bits All bits prefix R & RV All bits prefix RS All bits prefix RSP All bits All bits prefix R All bits prefix RV

T10 T15 M4 M3.5 M3 M4 TB5 TB 4 or TB 20 or TB 18

When ordering replacement blades: State • Insert Number eg. PL 30 12 1.5

•

All straight Router Bits without bearings or with a bearing on the shank, are supplied with end cutting inserts. • Inserts can be removed and replaced without removing cutter from the routing machine. CAUTION • DO NOT OVERTIGHTEN TORX SCREWS • When tightening screws, ensure that inserts are held firmly into pocket for correct location • Ensure tip seating is free of burs and resin when changing blades.

Quantities of 10 supplied in a protective plastic box.

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599 Premium Quality

D I A M O N D C O AT E D R O U T E R B I T S Ideal for use in a wide range of materials such as marble, granite, fibreglass, ceramics, solid surface materials and some types of plastics, glass and graphite. (*Special shapes and sizes available on request)

ROUNDING OVER BITS

45º CHAMFER BIT

PART No.

RADIUS

BEARING

SHANK

DIACR 3.5 MB 1/2 DIACR 6 MB 1/2 DIACR 10 MB 1/2 DIACR 12 MB 1/2

27 30 37 43

8 14 16 18

65 70 75 75

3.5 6 10 12

TBRS 40 TBRS 40 TBRS 40 TBRS 40

1/2 1/2 1/2 1/2

45º INVERTED CHAMFER BIT

PART No.

BEARING

SHANK

DIACR 45 B 1/2

TBRS 41

1/2

ROUTER BITS

DIAMOND COATED EDGE FORMING BITS

TRIM BIT

PART No.

BEARING

SHANK

DIACR 135 B 1/2

TBRS 42

1/2

PART No. DIACR 12730 B 1/2

BEARING

SHANK

12.7

TBRS 43

1/2

Email: Sales@cltoolcentre.com

Established 1969

PART No.

OD mm

ID mm

B mm

TBRS 40 TBRS 41 TBRS 42 TBRS 43

19 16 30 12.7

5 5 10 4.8

4 6 9 4.8

Ph: 07 - 3326 1500

REPLACEMENT BEARINGS (RUBBER SEALED)

DIAMOND GRINDING CUP WHEELS FOR USE ON ANGLE GRINDERS (GUARDING RECOMMENDED)

DOUBLE GRINDING CUP WHEEL

SEGMENTED TURBO CUP WHEEL For rough surface grinding. Suitable for grinding concrete, brick , stone and most masonry applications .

Ideal for finish grinding concrete, granite, bricks and stone. The double row of diamond surface ensures smooth operation and long life.

PART No.

DIAMETER

ARBOR

DDGC 458 DDGC 478

4” (105mm) 4” (105mm)

5/8 7/8

PART No.

DIAMETER

ARBOR

DSTGC 458 DSTGC 478

4” (105mm) 4” (105mm)

5/8 7/8

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ROUTER BITS

DIAMOND TIPPED TOOLS (PCD)

STRAIGHT BITS

For routing panels of raw and coated hardboard, MDF and multi-layer panels

High Performance Tools For routing panels of raw and coated board, MDF and multi-layer panels • Open flutes provide for faster and easier chip clearance. • Shear angle Tips • Increased feeds • Low noise • Excellent finish • Polished Diamond

• Shear angle Tips • Polished Diamond • Open flutes provide for faster and easier chip clearance.

Part No. (right hand) Part No. (left hand) DIATR 10M 12 DIATR 12M 12 DIATR XE 12M 12 DIATR 12M 25 DIATR 14M 16 DIATR 16M 16 DIATR XE 16M 16 DIATR XXE 16M 16 DIATR 16M 20 DIATR XE 16M 20 DIATR XXE 16M 20 DIATR 18M 16 DIATR XE 18M 16 DIATR 18M 20 DIATR XE 18M 20 DIATR XXE 18M 20 DIATR 18M 25 DIATR XE 18M 25 DIATR XXE 18M 25 DIATR 20M 20 DIATR XE 20M 20 DIATR XXE 20M 20 DIATR XXXE 20M 20 DIATR 20M 25 DIATR XE 20M 25 DIATR XXE 20M 25 DIATR XXXE 20M 25

Ph: 07 - 3326 1500

Email: Sales@cltoolcentre.com

Premium Quality

Established 1969

DIATL 10M 12 DIATL 12M 12 DIATL XE 12M 12 DIATL 12M 25 DIATL 14M 16 DIATL 16M 16 DIATL XE 16M 16 DIATL XXE 16M 16 DIATL 16M 20 DIATL XE 16M 20 DIATL XXE 16M 20 DIATL 18M 16 DIATL XE 18M 16 DIATL 18M 20 DIATL XE 18M 20 DIATL XXE 18M 20 DIATL 18M 25 DIATL XE 18M 25 DIATL XXE 18M 25 DIATL 20M 20 DIATL XE 20M 20 DIATL XXE 20M 20 DIATL XXXE 20M 20 DIATL 20M 25 DIATL XE 20M 25 DIATL XXE 20M 25 DIATL XXXE 20M 25

D mm 10 12 12 12 14 16 16 16 16 16 16 18 18 18 18 18 18 18 18 20 20 20 20 20 20 20 20

L1 d mm mm 25 12 25 12 35 12 25 25 25 16 25 16 35 16 43 16 25 20 35 20 43 20 25 16 35 16 25 20 35 20 43 20 25 25 35 25 43 25 25 20 35 20 43 20 52 20 25 25 35 25 43 25 52 25

L2 mm 40 40 40 55 50 50 50 50 50 50 50 50 50 50 50 50 55 55 55 50 50 50 50 55 55 55 55

L3 mm 75 75 85 75 85 85 95 103 85 95 103 85 96 85 96 103 90 100 108 85 95 103 112 90 100 108 117

Z mm 3+1 3+1 4+1 3+1 3+1 3+1 4+1 5+1 3+1 4+1 5+1 3+1 4+1 3+1 4+1 5+1 3+1 4+1 5+1 3+1 4+1 5+1 6+1 3+1 4+1 5+1 6+1

HIGH PERFORMANCE (HP)

D mm 18 18 18 18 20 20 20 20 20 20

Part No.(right hand) Part No.(left hand) DIATR HP 18M 20 DIATR XEHP 18M 20 DIATR HP 18M 25 DIATR XEHP 18M 25 DIATR HP 20M 20 DIATR XEHP 20M 20 DIATR XXEHP 20M 20 DIATR HP 20M 25 DIATR XEHP 20M 25 DIATR XXEHP 20M 25

DIATL HP 18M 20 DIATL XEHP 18M 20 DIATL HP 18M 25 DIATL XEHP 18M 25 DIATL HP 20M 20 DIATL XEHP 20M 20 DIATL XXEHP 20M 20 DIATL HP 20M 25 DIATL XEHP 20M 25 DIATL XXEHP 20M 25

Ideal for CNC Routing and contouring MDF, HDF, Plywood, sandwich panels (with or without veneer, paper or plastic coatings) Full carbide bodies up to 12mm diameter

L2 mm 50 50 55 55 50 50 50 55 55 55

L3 mm 85 95 90 100 85 95 110 90 100 115

Z mm 6+1 7+1 6+1 7+1 6+1 7+1 9+1 6+1 7+1 9+1

STRAIGHT BITS

EXTREME PERFORMANCE (XP) Helical pattern router bit for raw and coated panels, MDF, Multi layer panels, etc. • For use in CNC machines • Thick tips provide for multiple resharpens • Two way rotation • Fast chip discharge • Low Noise • High feed rates

D mm 20 20 20 25 25 25 25 25

Part No.(right hand) Part No.(left hand)

STRAIGHT FLUTE

L1 d mm mm 28 20 35 20 28 25 35 25 28 20 35 20 48 20 28 25 35 25 48 25

DIATR XP 20M 20 DIATR XP 20M 25 DIATR XE XP 20M 25 DIATR XP 25M 20 DIATR XP 25M 25 DIATR XE XP 25M 25 DIATR XXE XP 25M 25 DIATR XXXE XP 25M 25

DIATL XP 20M 20 DIATL XP 20M 25 DIATL XE XP 20M 25 DIATL XP 25M 20 DIATL XP 25M 25 DIATL XE XP 25M 25 DIATL XXE XP 25M 25 DIATL XXXE XP 25M 25

L1 d mm mm 23 20 28 25 35 25 23 20 23 25 35 25 45 25 55 25

L2 mm 50 55 55 50 55 55 55 55

L3 Z mm mm 83 5+1 93 7+1 100 8+1 83 5+1 88 5+1 100 8+1 110 10+1 120 13+1

DIAMOND (PCD) TIPPED FLUSH TRIMMING BIT

Part No.(right hand) DIATR S 6M 12 DIATR S 8M 12 DIATR S 10M 12 DIATR SX 10M 12 DIATR S 12M 12 DIATR S 16M 16 DIATR SXE 16M 16

Part No.(left hand) DIATL S 6M 12 DIATL S 8M 12 DIATL S 10M 12 DIATL SX 10M 12 DIATL S 12M 12 DIATL S 16M 16 DIATL SXE 16M 16

D 6 8 10 10 12 16 16

L1 12 12 12 22 25 25 35

d 12 12 12 12 12 16 16

L2 40 40 40 40 40 50 50

L3 70 70 70 70 70 85 95

Z 1+1 1+1 1+1 2+1 1+1 2+1 2+1

Made with Polycrystalline Diamond (PCD) Tips. PCD Tips keep a sharp cutting edge many times longer than tungsten carbide tips. These bits are excellent for extremely hard laminates.

NEW

Suffix 1/2 = 1/2” shank Otherwise 1/4” shank PART No. DIATR S 8012 B DIATR S 8016 B DIATR S 8016 B 1/2

A in. 3/8 1/2 1/2

B mm 9.5 12.7 12.7

in 1/2 5/8 5/8

mm 12.7 15.9 15.9

C in 2-3/32 2-7/32 2-13/16

mm 53.2 56.4 71.4

Bearing No. TB9 TB11 TB11

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599 Premium Quality

DIAMOND TIPPED TOOLS (PCD)

Wood boring Drills - Flat bottom (10mm shank with flat) For use on point-to-point boring and multi spindle machines Raw, Melamine and MDF panels

R d

Part No.(right hand) DIAT WD 5 R 57 DIAT WD 5 R 70 DIAT WD 6 R 57 DIAT WD 6 R 70 DIAT WD 8 R 57 DIAT WD 8 R 70 DIAT WD 10 R 57 DIAT WD 10 R 70

ROU N D I N G OV E R B I T S PART No. DIAT RO 6MR 16 DIAT RO 10MR 16 DIAT RO 12MR 16

D mm 24 32 36

D1 mm 12 12 12

R mm 6 10 12

L1 mm 11 15 17

d mm 16 16 16

L2 mm 45 45 45

L3 mm 50 70 72

Part No.(left hand) DIAT WD 5 L 57 DIAT WD 5 L 70 DIAT WD 6 L 57 DIAT WD 6 L 70 DIAT WD 8 L 57 DIAT WD 8 L 70 DIAT WD 10 L 57 DIAT WD 10 L 70

D 5 5 6 6 8 8 10 10

L1 32 45 32 45 32 45 32 45

d 10 10 10 10 10 10 10 10

L2 25 25 25 25 25 25 25 25

L3 57 70 57 70 57 70 57 70

ROUTER BITS

WOOD DRILLS

PROFILE BITS As well as the standard range of bits below, custom made bits can also be manufactured. Please provide specifications for pricing and availability.

Z 1 1 1 1 1 1 1 1

WOOD DRILLS

Through Drills (10mm shank with flat) For multi-spindle machines Makes through holes in Raw, Melamine and MDF panels D

Email: Sales@cltoolcentre.com

Established 1969

L2 L3

PART No. DIAT VGC 45D 16

B2 L1 d D Angle B1 mm mm mm mm mm mm 22.63 45Ë&#x161; 16 11.31 16.31 16

L2 mm 45

L3 mm 71.3

HINGE BORING DRILLS Hinge boring Drills (10mm shank with flat) For use on point-to-point boring and line machines Raw, Melamine and MDF panels

Part No.(right hand) DIAT WDT 5 R 57 DIAT WDT 5 R 70 DIAT WDT 6 R 57 DIAT WDT 6 R 70 DIAT WDT 8 R 57 DIAT WDT 8 R 70 DIAT WDT 10 R 57 DIAT WDT 10 R 70

Part No.(left hand) DIAT WDT 5 L 57 DIAT WDT 5 L 70 DIAT WDT 6 L 57 DIAT WDT 6 L 70 DIAT WDT 8 L 57 DIAT WDT 8 L 70 DIAT WDT 10 L 57 DIAT WDT 10 L 70

D 5 5 6 6 8 8 10 10

L1 32 45 32 45 32 45 32 45

d 10 10 10 10 10 10 10 10

L2 25 25 25 25 25 25 25 25

L3 57 70 57 70 57 70 57 70

Ph: 07 - 3326 1500

V E E G RO OV E / C H A MF E R B I T Z 1 1 1 1 1 1 1 1

A full range of Diamond Tipped (PCD) Sawblades, Scorers, Hogging Units, Anti-Chip Finishing Tool Heads and Grooving Cutter Blocks is available on request.

Part No.(right hand) DIAT WD 15 R 57 DIAT WD 30 R 57 DIAT WD 30 R 70 DIAT WD 35 R 57 DIAT WD 35 R 70 DIAT WD 40 R 57 DIAT WD 40 R 70

Part No.(left hand) DIAT WD 15 L 57 DIAT WD 30 L 57 DIAT WD 30 L 70 DIAT WD 35 L 57 DIAT WD 35 L 70 DIAT WD 40 L 57 DIAT WD 40 L 70

D 15 30 30 35 35 40 40

L1 32 32 45 32 45 32 45

d 10 10 10 10 10 10 10

L2 25 25 25 25 25 25 25

L3 57 57 70 57 70 57 70

Z 4 4 4 4 4 4 4

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

TRADE BLADES

TRADE BLADES Premium Quality Saw Blades for Portable, Radial Arm and Bench Machines These precision, hardened plate blades have thick micrograin carbide tips designed to give optimum performance in a wide ranch of materials. Al w Al ay wa s e y Al s w nsu wa ea re op ys r ey ade er fol e, qu at lo in w han ate g an mac d & gua r d sa hine hea ding r fe ty ma ing is i in nu pr n p st ru fact otec lac ct ur ti e. o io ns ers n. .

WOOD CUTTING - STANDARD KERF Part No. M6 24T M6 30T

Diameter 160mm 160mm

Teeth 24 30

Kerf Grind 2.5mm Alt. Bev. 2.5mm Alt. Bev.

M7 20T M7 30T M7 40T M184 20T M184 30T M184 40T

178mm 178mm 178mm 184mm 184mm 184mm

20 30 40 20 30 40

2.6mm 2.6mm 2.6mm 2.6mm 2.6mm 2.6mm

Alt. Bev. Alt. Bev. Alt. Bev. Alt. Bev. Alt. Bev. Alt. Bev.

M8 24T M8 30T M8 40T M8 60T M210 24T M210 30T M210 40T M210 60T

203mm 203mm 203mm 203mm 210mm 210mm 210mm 210mm

24 30 40 60 24 30 40 60

2.8mm 2.8mm 2.8mm 2.8mm 2.8mm 2.8mm 2.8mm 2.8mm

Alt. Bev. Alt. Bev. Alt. Bev. Alt. Bev. Alt. Bev. Alt. Bev. Alt. Bev. Alt. Bev.

WOOD CUTTING - THIN KERF Part No. MTHIN 6 24T

Diameter 160mm

Teeth 24

Kerf Grind 1.7mm Alt. Bev.

MTHIN 6 40T

160mm

1.7mm Alt. Bev.

MTHIN 184 20T MTHIN 184 30T MTHIN 184 40T

MTHIN 210 30T MTHIN 210 40T

184mm 184mm 184mm

210mm 210mm

20 30 40

30 40

ALUMINIUM CUTTING - NEG RAKE Part No.

Diameter

Teeth

Kerf

Grind

MNF160 60T

160mm

2.2mm Trip. Chip.

MNF184 60T

184mm

2.2mm Trip. Chip.

MNF210 80T

210mm

2.8mm Trip. Chip.

MNF216 60T MNF216 80T

216mm 216mm

60 80

2.7mm Trip. Chip. 2.7mm Trip. Chip.

MNF9 80T

235mm

2.8mm Trip. Chip.

MNF10 80T MNF10 100T

250mm 250mm

80 100

3.0mm Trip. Chip. 2.6mm Trip. Chip.

MNF262 80T

262mm

3.1mm Trip. Chip.

MNF300 100T

300mm

100

2.8mm Trip. Chip.

1.7mm Alt. Bev. 1.7mm Alt. Bev. 1.7mm Alt. Bev.

2.2mm Alt. Bev. 2.2mm Alt. Bev.

*To Suit Elu Machines, Negative Rake *MN216 24T 216mm 24 2.8mm Alt. Bev. *MN216 48T 216mm 48 2.8mm Alt. Bev.

Ph: 07 - 3326 1500

Email: Sales@cltoolcentre.com

Established 1969

M9 24T M9 30T M9 40T M9 60T

235mm 235mm 235mm 235mm

24 30 40 60

3.0mm 3.0mm 3.0mm 3.0mm

M10 40T M10 60T M10 72T

250mm 250mm 250mm

40 60 72

3.0mm Alt. Bev. 3.0mm Alt. Bev. 3.0mm Alt. Bev.

M262 60T

262mm

3.0mm Alt. Bev.

M12 30T M12 72T

300mm 300mm

30 72

3.2mm Alt. Bev. 3.2mm Alt. Bev.

When ordering - please specify part no and add bore size eg: 9 1/4" x 60 x 25 mm = M9 60T x 25mm Variations to common bore sizes are supplied on request at no extra charge.

Alt. Bev. Alt. Bev. Alt. Bev. Alt. Bev.

MTHIN 235 30T MTHIN 235 40T

235mm 235mm

30 40

2.4mm Alt. Bev. 2.4mm Alt. Bev.

MTHIN 250 100T

250mm

100

2.4mm Alt. Bev.

MTHIN 305 60T MTHIN 305 80T

305mm 305mm

60 80

2.8mm Alt. Bev 2.8mm Alt. Bev

METAL CUTTING BLADES MMET 102 20T MMET 115 20T MMET 125 20T MMET 150 30T MMET 184 36T MMET 210 40T MMET 230 48T MMET 250 60T MMET 305 60T

102mm 115mm 125mm 150mm 184mm 210mm 230mm 250mm 305mm

20 20 20 30 36 40 48 60 60

2.2 2.2 2.2 2.2 2.2 2.6 2.6 2.6 2.6

Flat Top Grind Flat Top Grind Flat Top Grind Flat Top Grind Flat Top Grind Flat Top Grind Flat Top Grind Flat Top Grind Flat Top Grind

A full range of precision, turned saw bushes is available ex-stock. Odd size bushes can be manufactured to suit most requirements. Metal cutting blades are for use only on power saws equipped with adequate guarding that meets Australian standards. Always follow the operating & safety instructions provided by the manufacturer of the machine. Always hold the machine with both hands. Do not use for side grinding. Wear eye, ear, respiratory & hand protection.

CARB-I-TOOL BENCH SAW BLADES are made to exacting European standards and cover a wide range of applications. These hardened plate blades have superior quality micro-grain carbide teeth that enable the sharp cutting edge to be maintained longer between sharpenings

Al w Al ay wa s e y Al s w nsu wa ea re op ys r ey ade er fol e, qu at lo in w han ate g an mac d & gua r d sa hine hea ding r fe ty ma ing is i in nu pr n p st ru fact otec lac ct ur ti e. o io ns ers n. .

Application Part No. PRECISION L5BA10N CUTTING " Specially " intended for " sawing thin " hard material " eg: bakelite, LPQ5BA10N plywood & L5BA10N plexiglass. " Chip free finish Material L5BA10T2 1-10mm

Application PRECISION CROSSCUT For cross cutting small sized timber, chipboard, etc. materials 2-20mm thick

Diam. Teeth 100-4" 28 150-6" 48 180-7" 56 200-8" 64 225-9" 68 250-10" 80 300-12" 96 350-14" 104 400-16" 120 450-18" 144 150-6" 48 180-7" 56 200-8" 64 225-9" 68 250-10" 80 L5BA10T3 180-7" 56 200-8" 64 225-9" 68 250-10" 80 300-12" 96

Kerf 2.5 2.2 2.5 2.8 2.8 2.8 3.2 3.5 4.0 4.0 1.8 2.0 2.0 2.2 2.2 1.8 1.8 2.0 2.0 2.2

Part No. L5BA14N " " " " LPQ5BA14N LPQ5BA14N LPQ5BA14N L5BA14N " "

Kerf 2.2 2.2 2.5 2.5 2.8 3.2 3.2 3.5 4.0 4.0 4.0

Diam. Teeth 125-5" 28 150-6" 32 180-7" 40 200-8" 44 225-9" 48 250-10" 60 300-12" 72 350-14" 80 400-16" 88 450-18" 96 500-20" 112

Application Part No. Diam. PRECISION LPQ5EA10N 300-12" CUTTING Positive rake. LPQ5EA14N 300-12" Triple chip.

Teeth 96

Kerf 3.2

3.2

Application Part No. Diam. Teeth CROSSCUT L10BA19N 250-10" 40 For cutting 300-12" 48 small to medium 350-14" 60 size timber, 400-16" 68 chipboard etc. 450-18" 72 materials 6-40mm 500-20" 80 thick.

Application Part No. CROSSCUT L10BA30N Cross cutting medium to large size timber 15-90mm thick

Diam. Teeth 250-10" 24 300-12" 32 350-14" 36 400-16" 40 450-18" 48 500-20" 52

Kerf 2.8 3.2 3.5 4.0 4.0 4.0

Application

Diam. Teeth 250-10" 40 300-12" 48 350-14" 60 400-16" 68 450-18" 72 500-20" 80

Kerf 2.8 3.2 3.5 4.0 4.0 4.0

Part No. L20BA30N COMBINATION RIP AND CROSS CUT Materials 15-90mm thick.

Diam. Teeth 250-10" 24 300-12" 32 350-14" 36 400-16" 40 450-18" 48 500-20" 52

Kerf 2.8 3.2 3.5 4.0 4.0 4.0

Application Part No. RIP SAWS L20BA39N For ripping larger timbers 20-125mm thick

Diam. Teeth 250-10" 20 300-12" 24 350-14" 28 400-16" 32 450-18" 36 500-20" 40 560-22" 44 610-24" 48 630-26" 48

Kerf 2.8 3.2 3.5 4.0 4.0 4.0 4.5 4.5 4.5

Application Part No. RADIAL LN2BA30N ARM Negative hook angle for cross cutting timber in pendium or pull across cross cut saws

Diam. Teeth 250-10" 24 300-12" 30 350-14" 36 400-16" 40

Kerf 2.8 3.1 3.5 4.0

Part No. L20BA19N COMBINATION RIP AND CROSS CUT Materials 6-40mm thick.

Application

Kerf 2.8 3.2 3.5 4.0 4.0 4.0

Application Part No. Diam. Teeth SPECIAL L10BA30N 380 40 TABLE L5BA16N 380 72 SAW BLADES 380mm (15") DIAMETER

Part No. Bore Size Diam. SCORING SAWS SOLID CONICAL LSOLID 20mm bore 105 22mm bore 105 22mm bore 120 20mm bore 120 45mm bore 125

Teeth

Part No. Diam. SCORING SAWS SPLIT LSPLIT 100 " 100 LPQSPLIT 120 LPQSPLIT 120

Bore Size

Teeth

20mm bore 22mm bore 22mm bore 20mm bore

2x12 2x12 2x12 2x12

16 16 24 24 20

Application Part No. Diam. Teeth SAWS FOR NON FERROUS METAL CUTTING For sawing LN2EAM14 150-6" 36 aluminium and 180-7" 40 non-ferrous 200-8" 44 metals 225-9" 48 3-12mm 250-10" 56 thick. 275-11" 64 Negative rake. 300-12" 68 Triple chip. 350-14" 80 400-16" 88 450-18" 96 For sawing LN2EAM10 150-6" 44 aluminium 180-7" 52 and non-ferrous 200-8" 60 metals up to 225-9" 64 6mm thick. 250-10" 80 Negative rake. 275-11" 84 Triple chip. 300-12" 96 350-14" 104 400-16" 120 450-18" 132

BENCH SAW BLADES

Kerf

2.5 2.8 2.8 2.8 3.1 3.1 3.5 4.0 4.5 4.5 2.5 2.8 2.8 2.8 2.8 3.2 3.2 3.5 4.0 4.0

Ph: 07 - 3326 1500

Established 1969

When ordering please specify part no., diameter and add bore size Eg: L5BA10N 250 x 80T x 25mm bore "Made to Order" Sawblades are also available. Price and delivery on application.

Kerf 4.0 4.0

All blades available in standard bore sizes. Variation in bore size available at no extra charge. BA = Alternate Bevel EA = Triple Chip

BLADE/SCORER PACKAGES Part No.

Description

LPQPKGBA LPQPKGBA LPQPKGEA LPQPKGEA

72 72 72 72

20 22 20 22

300 x 72T AB + 120 x 24 x 20 Split Scorer 300 x 72T AB + 120 x 24 x 22 Split Scorer 300 x 72T Trip. Chip + 120 x 24 x 20 Split Scorer 300 x 72T Trip. Chip + 120 x 24 x 22 Split Scorer

LPQPKGBA LPQPKGBA LPQPKGEA LPQPKGEA

96 96 96 96

20 22 20 22

300 x 96T AB + 120 x 24 x 20 Split Scorer 300 x 96T AB + 120 x 24 x 22 Split Scorer 300 x 96T Trip. Chip + 120 x 24 x 20 Split Scorer 300 x 96T Trip. Chip + 120 x 24 x 22 Split Scorer

Email: Sales@cltoolcentre.com

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

TRADE BLADES

Email: Sales@cltoolcentre.com

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

TRADE BLADES CEMENT SHEET CUTTING SAW BLADES

METAL CUTTING SAW BLADE

Premium Trade Blade Quality, Diamond (PCD) Tipped, Heat Treated Blades for cutting cement sheet and other compressed, highly abrasive materials

Specifically Designed to Cut Corrugated Iron, Acrylics and Metals Fits most 185mm Hand Held Portable Metal Cutting Machines

NEW NEW

PART No. MPCD125 4T 20mm MPCD160 4T 20mm MPCD180 4T 20mm MPCD250 6T 30mm MPCD300 8T 30mm

Diameter 125mm 160mm 180mm 250mm 300mm

Teeth

Kerf

Bore

4 4 4 6 8

2.4mm 2.4mm 2.4mm 3.2mm 3.2mm

20mm 20mm 20mm 30mm 30mm

To be used only on power saws with adequate guarding that meets Australian standards. Always follow the operating & safety instructions provided by the manufacturer of the machine on which the saw blade is to be used. Wear eye, ear, respiratory & hand protection.

PART No.

Teeth

Kerf

Bore

48T

2.2mm

20mm

MMET185 48T 20mm

Metal cutting blades are for use only on power saws equipped with adequate guarding that meets Australian standards. Always follow the operating & safety instructions provided by the manufacturer of the machine. Always hold the machine with both hands. Do not use for side grinding. Wear eye, ear, respiratory & hand protection.

HOLE SAWS CARBIDE TIPPED HOLESAWS FOR WOOD For use on a range of timber applications. Holesaws up to 30mm have 1/2-20 UNF internal thread and no driving pins. Holesaws 32mm and over have 5/8-18 UNF internal thread and driving pins.

Ph: 07 - 3326 1500

B FIXED ARBOR

QUICK CHANGE

VAX1 - For 19-30mm diam. holesaws VAX3/8 - For 32-63mm diam. holesaws VAX2 - For 32-63mm diam. holesaws VAX1/2 - For 32-102mm diam. holesaws

PART No. THW THW THW THW THW THW THW THW THW THW THW THW THW THW

19 25 30 32 35 38 40 44 51 54 57 63 76 102

A mm 19 25 30 32 35 38 40 44 51 54 57 63 76 102

B mm 54 54 54 59 59 59 59 59 59 59 59 59 59 59

No. of Teeth 1 1 2 2 2 2 2 2 3 3 3 3 4 5

C A R B I D E T I P P E D H O L E S AW S F O R S TA I N L E S S S T E E L F I B R E G L A S S A N D O T H E R A B R A S I V E M AT E R I A L S PART No.

CARBIDE TIPPED

FIXED ARBOR VA 1 Used on V16 - V30 cutters VA 2 Used on V32 - V75 cutters QUICK CHANGE ARBOR VA 1/2 (1/2” SHANK) Used on V32 - V75 cutters VA 3/8 (3/8” SHANK) Used on V32 - V75 cutters

V16 V19 V20 V21 V22 V25 V28 V30 V32 V35 V38 V40 V42 V44 V50 V55 V60 V65 V70 V75

A mm 16 19 20 21 22 25 28 30 32 35 38 40 42 44 50 55 60 65 70 75

B mm 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16

No. of Teeth 3 4 4 4 5 5 6 6 7 7 8 8 8 9 10 11 12 13 14 15

Established 1969

PROFESSIONAL RANGE

A range of superior quality hand saws made in Sheffield by skilled craftsmen calling on centuries of experience and tradition. The range includes Panel and Tenon saws, Rip saw, Gents and Flexible Flush Cutting saws. PART No. S95 20 10ppi S95 22 8ppi S95 22 10ppi S95 24 6ppi S95 24 7ppi S95 24 8ppi S95 26 5ppi (RIP) S95 26 6ppi S95 26 7ppi

Length 20" 22" 22" 24" 24" 24" 26 26" 26"

Points Per Inch 10 8 10 6 7 8 5 6 7

S95 Handsaw

The blade is made from Allow Spring Steel, taper ground with a skew back giving effortless cutting and good balance, attractively finished with a Beech handle.

HAND SAWS Quality

HAND SAWS

Spare handle - Part No S95 HANDLE Spare Screws - Part No SSCREW

S52 - Tenon Saw

SDS819 Dovetail Saw

This Tenon Saw has a high grade Alloy Steel 3," deep blade with brass back, attractively finished with a Beech handle.

A brass backed dovetail saw with an Alloy Steel blade and Beech handle.

PART No. Length Points Per Inch S52 8 15ppi 8" 15 S52 10 15ppi 10" 15 S52 12 15ppi 12" 15 S52 14 15ppi 14" 15

Length 8"

PART No. SDS 819

Points Per Inch 20

Spare Handle - Part No SDS HANDLE Spare Screws - Part No SSCREW

Spare Handle - Part No S52 HANDLE Spare Screws - Part No S52 SSCREW

SGS8 Gents Saw

The perfect partner to the range of Hand and Tenon saws. An Alloy Steel blade with brass back. PART No. SGS 8

Length 8"

Points Per Inch 20

SFFC Flexible Flush Cutting Saw

Made from Flexible Alloy Steel with Beech handle. This saw cuts on the pull stroke, ideal for cutting Dowels, etc PART No. SFFC

Length 6"

Points Per Inch 20

Email: Sales@cltoolcentre.com

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Spare Handle - Part No SDS HANDLE Spare Screws - Part No SSCREW

Ph: 07 - 3326 1500

Hardpoint Saws

These heat treated, hardpoint saws give prolonged life, holding their edge up to 6 times as long as standard teeth. Supplied with soft touch handle.

NEW

PART No. S25 HP 22 7ppi

S25 Hand Saw

Length 22” 560mm

Points Per Inch 7

SWB-6 - Wallboard Saw

150mm cutting blade, 320mm long, ergonomic rubberised handle and teeth sharpened on both sides. For use with Plaster Board, plywood, etc.

S12 Tenon Saw

NEW

PART No. S12 HP 12 12ppi

Length 12" 300mm

Points Per Inch 12

Coping Saw

170mm (6 3/4”) Blade Length, 125mm Deep. Includes 5 Blades for a range of Wood and Metal Cutting Applications

NEW

PART No. SWB–6

Description Wallboard Saw

PART No. SCS55

Description Coping Saw

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

HAND SAWS

HAND SAWS FINE DETAIL SAW

Ideal for Cutting Dowels, Dovetails and other Precision Work 178mm Blade

DOUBLE PULL SAW

A Precision Hardpoint Double Edge Pull Saw with Triple Ground Teeth 1 Edge 9 P.P.I 1 Edge 15 P.P.I Popular for a wide range of cutting applications including trimming thin sections from the bottom of doors and door jambs.

PART No. SFDS

PART No. SDPS300

ALL PURPOSE MAGIC SAW The versatile blade can be set in 3 directions which allows for easy cutting of shapes. Cuts aluminium, nails, pipes, wire, wood rubber, etc. With the insertion of the flat saw blade the Magic Saw converts into a handy straight saw, ideal for small timber jobs. e.g. wall cuts, etc.

8 PIECE - MEDIUM GRIP

7 PIECE - SMALL GRIP

Contains: Frame, 6 coping saw blades, 1 straight saw blade for wood. Includes glass cutting tip, and glass & tile breaking grip

Contains: Frame, 5 coping saw blades, 1 straight saw blade for wood.

PART No. HA907

Ph: 07 - 3326 1500

Email: Sales@cltoolcentre.com

Established 1969

PART No. HA105

REPLACEMENT COPING SAW BLADES

6â&#x20AC;? MAGIC SAW

Contains: 5 replacement coping saw blades, For both HA907 & HA 105

Cuts Wood, Aluminium, Nails, Bolts, Plastic, Rubber and Stainless Steel PART No. HA103-A

PART No. HA500

REPLACEMENT WOOD BLADES

PART No. HA102 HA902

Description Replacement Blade for HA105 Round Head Replacement Blade for HA907 Square Head

MAGIC SAW DIAMOND BLADE

Cuts Tile and Ceramics, Glass and Metal

PART No. HA-DIA-S

CARB-I-TOOL JIGSAW BLADES

Universal Fitting to 2 Per Card 5 Per Card suit B&D, Skill, Part No. Part No. Hitachi, and Ryobi Old New Old New 9 TPI Fast Clean Wood Cut PU11C 24 TPI Fine Metal Cut PU18A 13 TPI Medium Cut Metal PU18B 13 TPI Medium Scroll Wood PU19BO 10 TPI Extra Clean Wood Cut PU1B 6 TPI Fast Clean Wood Cut PU1D 8.5 TPI Non Ferrous Metal/Plas PU27D 6 TPI Extra Fast Cut Curves PU44D 5 Assorted Handyman Mix Carbide Coated 1 Blade/Card SU30 (Cement, Laminates,Tiles, Light Brick)

Makita Fitting

3422-1

2 Per Card Part No. Old New

24 TPI Fine Metal Cut PM1 10 TPI Extra Clean Wood Cut PM2 9 TPI Fast Clean Wood Cut PM3 6 TPI Extra Fast Cut Curves PM4 6 TPI Fast Clean Wood Cut PM5 8.5 TPI Non Ferrous Metal/Plas PM7 13 TPI Medium Metal Cut PM8 13 TPI Medium Scroll Wood Cut PM9 5 Assorted Handyman Mix Carbide Coated 1 Blade/Card SM30 (Cement, Laminates,Tiles, Light Brick)

Large End Suits Bosch, AEG, Metabo

3406-2 3411-2 3413-2 3409-2 3401-2 3403-2 3418-2 3405-2

3311-2 3301-2 3306-2 3305-2 3304-2 33185-2 3313-2 3309-2 3322-1

3406-5 3411-5 3413-5 3409-5 3401-5 3403-5 3418-5 3405-5 SUX

5 Per Card Part No. Old New SM1 SM2 SM3 SM4 SM5 SM7 SM8 SM9 SMX

3311-5 3301-5 3306-5 3305-5 3304-5 33185-5 3313-5 3309-5 SMX

2 Per Card 5 Per Card Part No. Part No. Old New Old New

10 TPI Extra Clean Wood Cut P101B 6 TPI Fast Clean Wood Cut P101D 9 TPI Fast Clean Wood Cut P111C 24 TPI Fine Metal Cut P118A 13 TPI Medium Metal Cut P118B 13 TPI Medium Scroll Wood Cut P119BO 8.5 TPI Non Ferrous Metal/Plas P127D 6 TPI Extra Fast Cut Curves P244D 5 Assorted Handyman Mix Carbide Coated 1 Blade/Card S130 (Cement, Laminates,Tiles, Light Brick)

3101-2 3103-2 3106-2 3111-2 3113-2 3109-2 3118-2 3105-2 3122-1

Small End Fitting Suits Bosch, AEG, Metabo

2 Per Card Part No. Old New

9 24 13 13 10 6 8.5 6

P11C P18A P18B P19BO P1B P1D P27D

TPI Fast Clean Wood Cut TPI Fine Metal Cut TPI Medium Metal Cut TPI Medium Scroll Wood Cut TPI Extra Clean Wood Cut TPI Fast Clean Wood Cut TPI Non Ferrous Metal/Plas TPI Extra Fast Cut Curves

SU11C SU18A SU18B SU19BO SU1B SU1D SU27D SU44D SUX

3506-2 3511-2 3508-2 3509-2 3501-2 3503-2 3518-2

S101B S101D S111C S118A S118B S119BO S127D S244D SLX

3101-5 3103-5 3106-5 3111-5 3113-5 3109-5 3118-5 3105-5 SLX

CARB-I-TOOL RECIPROCATING SAW BLADES

A range of quality European made reciprocating saw blades suitable for most applications 5 Per Card CUTTING LENGTH PART No. 4015-5

280mm / 6 T.P.I

4430-5

130mm / 10 T.P.I

4431-5

180mm / 10 T.P.I

4432VP-5

280mm / 10-14 T.P.I

4401-5

130mm / 18 T.P.I

4411-5

130mm / 14 T.P.I

4416-5

210mm / 14 T.P.I

4014-5

130mm / 6 T.P.I

4041-5

130mm / 10 T.P.I

4020-5

280mm / 3 T.P.I

4052-5

210mm 5-4 T.P.I

4080-5

130mm â&#x20AC;&#x201C; GRIT

APPLICATION

JIGSAW BLADES

J I G S AW & R E C I P R O C AT I N G S AW B L A D E S

Curved Cuts Bi-Metal Blade Plastic, Wood Wood with Nails Straight Cuts Bi-Metal Blade Non-Ferrous Metal, Aluminium Sheet Metal, Metal Straight Cuts Bi-Metal Blade Metal, Sheet Metal, Aluminium Pipes and Profiles Straight Cuts Bi-Metal Blade Metal, Plastics, Wood with Nails Fast Straight Cuts Bi-Metal Blade Thin Material Metal, Sheet Metal Fast Straight Cuts Bi-Metal Blade Thick Material Metal, Non-Ferrous Metal Fast Straight Cuts Bi-Metal Blade Thick Material Metal, Non-Ferrous Metal Plaster Board Wood, Plastics Fast Cutting Hardened Teeth Non-Ferrous Metal, Aluminum Wood, Particle Board Plaster Board, Wood with Nails Fast Course Cut Wood Fast Course Cuts Hardened Teeth Green Wood, Branches, Firewood Straight Cuts Cast Iron, Ceramics, Fibre Reinforced Plastics

Ph: 07 - 3326 1500

Established 1969

Email: Sales@cltoolcentre.com

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

visit us at www.carbitool.com.au

Small End Fitting to suit Bosch,AEG and Metabo are available only 2 Blades/Card.

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Established 1969

ECONOCUT ROUTER BITS FOR THE HANDYMAN/DIY USER

Email: Sales@cltoolcentre.com

STRAIGHT BITS 12.7mm (1/2”) SHANK

6.35 mm (1/4”) SHANK PART No. EY 206 M EY 208 M EY 210 M EY 212 M EY 213 M EY 216 M EY 218 M EY 219 M

A mm 6 8 10 12 13 16 18 19

B mm 16 20 20 20 20 20 20 20

C mm 46.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7

PART No. EY 1406 M EY 1408 M EY 1410 M EY 1412 M EY 1413 M EY 1416 M EY 1418 M EY 1419 M

D O V E TA I L B I T S

B mm 16 20 25.4 25.4 25.4 25.4 25.4 25.4

ROMAN OGEE BITS

6.35 mm (1/4”) SHANK PART No. EY 1018

A mm 6 8 10 12 13 16 18 19

A B C mm mm mm 14.3 12.7 45

BEVEL

14°

6.35 mm (1/4”) SHANK A B C RADIUS mm mm mm mm 25.5 13 52 4 34.9 19 60.3 6.35

PART No. EY 5705 B EY 5708 B

12.7 mm (1/2”) SHANK

12.7mm (1/2”) SHANK

EY 1018 1/2 14.3 12.7 66.7 14°

EY 5705 B 1/2 25.5 13 66.7 4 EY 5708 B 1/2 34.9 19 70 6.35 Replacement bearings 1/4” Shank EY B 3 1/2” Shank EY B 4

Bevel

V. G R O O V E B I T S

OGEE BITS

6.35 mm (1/4”) SHANK A mm 12.7

PART No. EY 112

B mm 12.7

C mm 45

12.7 mm (1/2”) SHANK EY 112 1/2

12.7

6.35 mm (1/4”) SHANK A B C RADIUS mm mm mm mm 36.3 16.5 57.1 4.8 41 19 57.1 6.35

PART No. EY 7506 B EY 7508 B

12.7mm (1/2”) SHANK EY 7506 B 1/2 36.3 16.5 66.7 4.8 EY 7508 B 1/2 41 19 70 6.35

Ph: 07 - 3326 1500

Replacement bearings EY B 4

FLUSH TRIM BITS

ROUNDING OVER BITS

6.35 mm (1/4”) SHANK PART No. EY 8012 B EY 8016 B EY 8020 B

A B C mm mm mm

BEARING

9.5 12.7 54 EY B3 12.7 13 56 EY B4 15.8 25.4 67 EY B1

12.7 mm (1/2”) SHANK EY 8012 B 1/2 9.5 25.4 74.6 EY B3 EY 8016 B 1/2 12.7 25.4 79 EY B4 EY 8020 B 1/2 15.8 25.4 79 EY B1

6.35 mm (1/4”) SHANK PART No. EY 508 B EY 510 B EY 512 B EY 516 B

A mm 25.4 28.5 31.8 38.1

EY 508 B 1/2 EY 510 B 1/2 EY 512 B 1/2 EY 516 B 1/2

25.4 28.5 31.8 38.1

6.35 mm (1/4”) SHANK PART No.

A mm

B mm

C mm

EY 416 EY 420 EY 424

12.7 15.8 19.0

9.5 12.7 12.7

40 45 47

12.7 mm (1/2”) SHANK

mm 6.35 7.9 9.5 12.7

13.5 15.5 16.5 19

63.5 66.7 66.7 70

6.35 7.9 9.5 12.7

EY B 4

9.5 12.7 12.7

54 54 57.1

6.35 mm (1/4”) SHANK PART No. EY 608 B EY 610 B EY 612 B EY 616 B

A mm 25.4 28.5 31.8 38.1

B mm 13.5 15.5 16.5 19

C mm 52 56 56 60.3

RADIUS

mm 6.35 7.9 9.5 12.7

12.7mm (1/2”) SHANK EY 608 B 1/2 EY 610 B 1/2 EY 612 B 1/2 EY 616 B 1/2

25.4 28.5 31.8 38.1

Replacement bearing

RADIUS

BEADING BITS

CORE BOX BITS

12.7 15.8 19.0

C mm 52 56 56 60.3

12.7mm (1/2”) SHANK

Replacement bearing

EY 416 1/2 EY 420 1/2 EY 424 1/2

B mm 13.5 15.5 16.5 19

13.5 15.5 16.5 19

63.5 66.7 66.7 70

EY B 2

6.35 7.9 9.5 12.7

C mm 61.9 63.5 66.7 66.7 66.7 66.7 66.7 66.7

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Established 1969

ECONOCUT ROUTER BITS FOR THE HANDYMAN/DIY USER CLASSICAL BITS

6.35 mm (1/4”) SHANK PART No. EY 708 B EY 712 B EY 716 B

A mm 22 28.5 34.9

B mm 13 12.7 15.9

C RADIUS mm mm 52 6.35 53 9.5 57.1 12.7

Email: Sales@cltoolcentre.com

COVE BITS

6.35 mm (1/4”) SHANK A B C RADIUS mm mm mm mm

PART No. EY C 8 B EY C 12 B

28.5 12.7 50.8 3.2 35 15.9 57.1 4.8

12.7mm (1/2”) SHANK

EY 708 B 1/2 25.4 13 63.5 6.35 EY 712 B 1/2 31.8 12.7 66.7 9.5 EY 716 B 1/2 34.9 15.9 70 12.7

EY C 8 B 1/2 28.5 12.7 63.5 3.2 EY C 12 B 1/2 35 15.9 70 4.8 Replacement bearing

EY B 4

Replacement bearings 1/4” Shank EY B 3 1/2” Shank EY B 4

R E B AT I N G B I T S

CHAMFERING BITS 45

6.35 mm (1/4”) SHANK A B C D mm mm mm mm 22.2 12.7 53.8 6.35 28.5 12.7 53.8 9.5

12.7 mm (1/2”) SHANK EY1708 B 1/2 25.4 12.7 63.5 6.35 EY1712 B 1/2 31.8 12.7 63.5 9.5

6.35 mm (1/4”) SHANK PART No. EY 916 B

A mm 32

B mm 15

C mm 55

12.7 mm (1/2”) SHANK EY 916 B 1/2

Replacement bearing

66.7

EY B 3

Replacement bearings 1/4” Shank EY B 3 1/2” Shank EY B 4

BEARINGS

PART No. EY B 1 EY B 2 EY B 3 EY B 4

visit us at A mm 16 9.5 9.5 12.7

B mm 5 3.2 4 4.8

ID mm 5 4.8 3.2 4.8

www.carbitool.com.au Ph: 07 - 3326 1500

PART No. EY 1708 B EY 1712 B

T- C U T H A N D Y M A N R O U T E R B I T K I T S TUNGSTEN CARBIDE TIPPED

BUDGET KIT

GREENLINE KIT

• 12 Pieces • Anti Kickback Design

Wooden Presentation Box

Plastic Clamshell Pack

Contains:

3 - Straight Bits (6,12,16mm)

3 - Straight Bits (1/4”,1/2”,3/4”)

1 - 1/2” Core Box Bit

1 - 1/2” V Groove Bit

1 - Dovetail Bit

1 - 1/2” Flush Trim Bit with bearing

1 - 1/4 Cove Bit with bearing

1 - 1/2” Cove Bit with bearing

1 - 1/4 Rounding Over Bit with bearing

1 - 3/8” Rebating Bit with bearing

1 - 3/8 Rounding Over Bit with bearing

1 - 1/2” Rounding Over Bit with bearing

1 - 4mm Roman Ogee Bit with bearing

1 - 1/4” Roman Ogee Bit with bearing

1 - 45o Chamfer Bit with bearing

• 1/4'' Shank - Part No. TBUD-12

• 1/4'' Shank - Part No. TKIT-12 • 1/2'' Shank - Part No. TKIT-12-1/2 See page 36 for Carb-I-Tool Kits

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

PLANER AND BUZZER BLADES

Email: Sales@cltoolcentre.com

Established 1969

PLANER AND BUZZER BLADES DRILL COUNTERSINKS

BLADES FOR ELECTRIC HAND PLANERS MACHINE

MODELS

MAKITA HITACHI HITACHI RYOBI TOWA RYOBI TOWA RYOBI TOWA

1100, 1900, 1900B, 1923 PF2, PF3, FU20, F20A F30A L22, L22D L22L L120, L120N

PART No. HIGH SPEED STEEL KH1900B KHF20A KHF30A KHL22D KHL22L KHL120

PART No. CARBIDE TIPPED KT1900B KTF20A KTF30A KTL22D KTL22L KTL120

SOLID TUNGSTEN CARBIDE KNIVES

DRILL/COUNTERSINK WITH BALL BEARING DEPTH STOP

NEW

Carbide Tipped Countersink H.S.S Drill This tool allows precise depth adjustment when drilling screw holes. Ideal for timber decks and furniture making. Ball bearing depth stop with delrin cap eliminates scoring and burning on the workpiece. Triangular shanks suit ø3/8” and ø10mm drill chucks.

TWIN EDGE 82mm LONG For hand planers fitted with conversion sets. PART No. KTKNIVES (pair) PART No.

THIN PLANER BLADES (Buzzer Blades) Available in lengths up to 1060 mm (HSS) and 1010mm (Carbide Tipped). These can be cut to length and rebated if required. Sets of knives of any number can be matched and balanced. CARBIDE TIPPED

HIGH SPEED STEEL 18% TUNGSTEN

Ph: 07 - 3326 1500

THICKNESS mm 3 3 3 3

WIDTH mm 20 25 30 35

THICKNESS mm 3 3 3 3 3 3 4

WIDTH mm 20 22 25 30 35 38 38

DCS 3.2 DS DCS 3.5 DS DCS 3.8 DS DCS 5.0 DS

DRILL/COUNTERSINK Carbide Tipped Countersink H.S.S Drill

DCS 2.4 DCS 3.2 DCS 4.0 DCS 4.4 DCS 5.0 DCS 5.0-16 DCS 6.3

HIGH SPEED STEEL 6-7% TUNGSTEN

WIDTH mm 40 50 60 70

CARBIDE TIPPED THICKNESS mm 10 10

WIDTH mm 60 70

SOLID CARBIDE PLANER KNIVES THICKNESS in. mm KTSC 20 1/8 3.2 KTSC 24 1/8 3.2 PART No.

A1 A2

A1 mm 2.4 3.2 4.0 4.4 5.0 5.0 6.3

A2 mm 9 10 11 11 12 16 13

B mm 10 10 10 10 10 12 10

C1 mm 52 70 73 80 82 92 101

WIDTH in. mm 5/8 15.9 3/4 19

LENGTH in. mm 6 152.4 6 152.4

C2 Shank mm Ø mm 41 8 41 8 41 8 41 8 46 8 47 10 46 10

Produces a 82° Countersink

DRILL/COUNTERSINK H.S.S Countersink H.S.S Drill 1/4” Shank

Supplied in 2 or 3 piece sets

Special sizes available on request.

B C1

PART No.

Available in lengths up to 650 mm.

For drilling, chamfering in solid wood, wood composites, and plastic laminated materials.

H . S . S D RI L L CARBIDE TIPPED COUNTERSINK

C O R R U G AT E D B A C K K N I V E S

THICKNESS mm 8 8 8 8

A1 A2 B C SCREW mm mm mm mm GAUGE 3.2 16 7.3 65 #8 3.5 16 7.1 70 #9 3.8 16 7.0 75 #10 5.0 16 6.3 86 BUGLE

PART No. HDSC - 1 HDSC - 2 HDSC - 3 HDSC - 4 HDSC - 5

DRILL SIZE 2 mm 2.4 mm 3 mm 3.175 mm 3.5

FOR SCREW #4 #6 #8 #10 #12

CARB-I-TOOL FORSTNER BITS Quality steel and tungsten carbide tipped forstner bits to produce flat bottom holes of various diameters. STEEL (imperial) STEEL (metric) 1/4” quick change shank PART No. FB 08 FB 12 FB 16 FB 20 FB 24 FB 28 FB 32 FB 36 FB 40 FB 44 FB 48 FB 52 FB 56 FB 60 FB 64 FB 72

DIAMETER 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1–1/8” 1–1/4” 1–3/8” 1–1/2” 1–5/8” 1–3/4” 1–7/8” 2” 2–1/8”

1/4” quick change shank PART No. FB 06m FB 10m FB 12m FB 16m FB 20m FB 22m FB 25m FB 28m FB 32m FB 35m FB 38m FB 42m FB 45m FB 48m FB 50m FB 54m

1/4” quick change shank

DIAMETER 6 mm 10 mm 12 mm 16 mm 20 mm 22 mm 25 mm 28 mm 32 mm 35 mm 38 mm 42 mm 45 mm 48 mm 50 mm 54 mm

PART No. FBT 06m FBT 10m FBT 12m FBT 16m FBT 20m FBT 22m FBT 25m FBT 28m FBT 32m FBT 35m FBT 38m FBT 42m FBT 45m FBT 48m FBT 50m FBT 54m

DIAMETER 6 mm 10 mm 12 mm 16 mm 20 mm 22 mm 25 mm 28 mm 32 mm 35 mm 38 mm 42 mm 45 mm 48 mm 50 mm 54 mm

ACCESSORIES

1” diameter and above have saw tooth design.

5 PIECE KIT

Contains 1 of each 5/8”, 3/4”, 1”, 1-1/4”, 1-3/8”

5 PIECE KIT

(Metric)

Part No: FB-5KIT METRIC Contains 1 of each 16mm, 20mm, 25mm, 32mm, 35mm

5 PIECE KIT

(TCT Metric)

Part No: FB-5KIT TCT METRIC Contains 1 of each 16mm, 20mm, 25mm, 32mm, 35mm

ADJUSTABLE CIRCLE HOLE CUTTER Produces holes of between 40mm and 120mm in a wide range of materials to a depth of 35mm. Fitted with carbide tipped blades, 2 spare steel blades, 1 spare drill and a hex key are also supplied. 10mm hex shank. For use in wood, laminates, plywood, MDH, FRP, etc. For bench drill or secured portable hand drill only. This tool is not suitable for portable router machines.

16 PIECE KIT

Part No: FB-16KIT

Contains 1 of each 1/4”, 3/8”, 1/2”, 5/8’, 3/4”, 7/8”, 1” 1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”, 1-5/8” 1-3/4”, 1-7/8”, 2”, 2-1/8”

16 PIECE KIT

(Metric)

Part No: FB-16KIT METRIC

Contains 1 of each 6mm, 10mm, 12mm, 16mm, 20mm, 22mm 25mm, 28mm, 32mm, 35mm, 38mm, 42mm, 45mm, 48mm, 50mm, 54mm,

EXPANSION DRILL BITS Ideal for drilling large holes in timber. Made of hardened high carbon steel. 2 sizes • 15mm - 45mm • 22mm - 76mm For use in drills only PART No. EXPDB-1 EXPDB-2

Ph: 07 - 3326 1500

Part No: FB-5KIT

SIZE RANGE 15mm - 45mm 22mm - 76mm

WOOD CHISELS General purpose, durable and economical range of wood chisels.

PART No. TACC-120

Email: Sales@cltoolcentre.com

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

PART No. WC 6M WC 12M WC 19M WC 25M WC 41KIT

SIZE LENGTH 6m 260mm 12mm 260mm 19mm 260mm 25mm 260mm 6mm, 12mm, 19mm 25mm (260mm long)

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ACCESSORIES

Email: Sales@cltoolcentre.com

Established 1969

ACCESSORIES AUGER BITS A

PART No. AUG230 AUG230 AUG230 AUG230 AUG230 AUG230 AUG230 AUG230 AUG230 AUG230 AUG230 AUG230

A mm 6 8 10 12 14 16 18 19 20 22 25 30

(230mm Long)

6M 8M 10M 12M 14M 16M 18M 19M 20M 22M 25M 30M

PART No. AUG400 AUG400 AUG400 AUG400 AUG400 AUG400 AUG400 AUG400 AUG400 AUG400 AUG400 AUG400

Precision ground cutting edges, heat treated for strength and screw threaded centre point. For use in hard and soft timbers, chipboard, MDF, plywood, etc.

BRAD POINT BITS

(400mm Long)

6M 8M 10M 12M 14M 16M 18M 19M 20M 22M 25M 30M

A mm 6 8 10 12 14 16 18 19 20 22 25 30

HSS BRAD POINT DRILL KIT

For all wood projects, furniture manufacturing, carpentry and dowelling applications where exact size holes are required.

6 Pce. Stub Length (58mm long) Quick Change Hex Shank Idea for drilling accurate holes in soft wood and hard wood, plywood and hardboards etc.

NEW B C HIGH CARBON STEEL

PART No.

Ph: 07 - 3326 1500

BP3M BP4M BP5M BP6M BP7M BP8M BP9M BP10M BP11M BP12M BP13M BP-5KIT

CARBIDE TIPPED

A B C mm mm mm 3 40 60 4 48 75 5 55 85 6 58 90 7 68 95 8 75 105 9 80 115 10 80 115 11 95 115 12 95 125 13 95 130 3,6,8,10,12mm

PART No. TBP3M TBP4M TBP5M TBP6M TBP7M TBP8M TBP9M TBP10M TBP11M TBP12M TBP13M TBP-5KIT

A B C mm mm mm 3 38.1 76.2 4 38.1 76.2 5 50.8 88.9 6 60.3 101.6 7 60.3 110 8 60.3 120 9 60.3 120 10 60.3 120 11 60.3 150 12 60.3 150 13 60.3 150 3,6,8,10,12mm

HOLLOW MORTISE CHISELS

Combination of a drill and 4 sided chisel. For clean, straight edges and corners in drilled holes. 3/4” shank

PART No.

DESCRIPTION

HBPQC-6KIT

1x 3,4,5,6,8,10mm Diameter

H.S.S. DRILL SAW (TiN Coated) For cutting irregular contours and enlarging blind holes. For use in wood, soft metals, plastics and rubber etc. A

B C PART No. DST3M DST4M DST6M DST8M DST10M DST12M DST 368M KIT

A B C mm mm mm 3 40 60 4 45 70 6 60 92 8 62 97 10 70 103 12 70 109 1 of each 3mm, 6mm, 8mm

MULTI ANGLE DRILL BITS These tools cut, drill, mill and rout with amazing directional control. Due to multiple cutting edges they can cut forward, backwards, sideways and curves. A universal tool for all trades and DIY users. • TiN Coated

NEW

A PART No. HMC08 HMC10 HMC12 HMC14 HMC16 HMC18 HMC20 HMC24 HMC28 HMC32

Diameter

Overall Length

1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 3/4” 7/8” 1”

210mm 210mm 210mm 210mm 210mm 210mm 225mm 225mm 225mm 225mm

PART No. MAD12M MAD16M MAD19M MAD25M MAD 4 KIT

A C mm mm 12 130 16 130 19 130 25 130 4 pce kit 12,16,19,25

Established 1969

ACCESSORIES

ACCESSORIES ROSETTE CUTTERS Make your own quality rosettes in a drill press. Decorative moulds for enhancing furniture and architectual applications

TRO 01 1/2

TRO 02 1/2

TRO 03 1/2

CARBIDE TIPPED - TWO FLUTES

TRO 01 1/2 TRO 02 1/2 TRO 03 1/2 TROL 01 1/2 TROL 02 1/2 TROL 03 1/2

A in. 2 1/8 2 1/8 2 1/8 2 3/4 2 3/4 2 3/4

B mm 54 54 54 70 70 70

in. 45/64 45/64 45/64 45/64 45/64 45/64

TROL 01 1/2

C mm 18 18 18 18 18 18

in. 2 43/64 2 43/64 2 43/64 2 43/64 2 43/64 2 43/64

mm 68 68 68 68 68 68

Important Safety Warning These tools are drills – For use in drill press only NOT for use in a router. Maximum RPM 5,000 Recomended RPM – 1800 Hardwoods – 3500 Softwoods

TROL 02 1/2

TROL 03 1/2

Ph: 07 - 3326 1500

PART No.

Drawings not to scale.

S PA D E B I T S CARB-I-TOOL SPADE BITS 6” LONG PART No. WSB 6 WSB 8 WSB 10 WSB 12 WSB 13 WSB 14 WSB 16 WSB 18 WSB 19 WSB 20 WSB 22 WSB 24 WSB 25 WSB 28 WSB 30 WSB 32 WSB 35 WSB 38

DIAMETER 6 mm 8 mm 10 mm 12 mm 13 mm 14 mm 16 mm 18 mm 19 mm 20 mm 22 mm 24 mm 25 mm 28 mm 30 mm 32 mm 35 mm 38 mm

COUNTERBORE ADAPTOR FOR SPADE BITS Pat. Pending.

SPADE BIT KITS

Allows you to convert your standard spade bit into a counterbore tool PART No. WSBCA 3/8 WSBCA 1/2 WSBCA 5/8

DIAMETER 3/8 1/2 5/8

Fits most spade bits and enables the spade bit to bore a hole to accommodate the bolt head either flush with, or below the surface of the timber. Pre drill bolt hole to suit counterbore diameter.

Email: Sales@cltoolcentre.com

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Part No: WSB-6KIT

Part No: WSB-13KIT

Contains 1 of each 6mm, 10mm, 12mm, 16mm, 19mm, 25mm.

Contains 1 of each 6mm, 8mm, 10mm, 12mm, 13mm, 14mm, 16mm, 18mm, 19mm, 20mm, 22mm, 24mm, 25mm, 6” Extension, Hex Wrench

Part No: WSBEX-6 6” Extension for Spade Bits

Part No: WSBEX-12 12” Extension for Spade Bits

ACCESSORIES

Email: Sales@cltoolcentre.com

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ACCESSORIES MASONRY DRILL BITS Made of high carbon steel with a carbide tip and hardened core. For use with rotary and percussion drills. Use for masonry, conrete, rock, artificial stone etc. SDS PLUS SHANK

ROUND SHANK

B C

C A mm 5 5.5 6 6.5 8 10 12 13 14 16 18 20 22 25

PART No. MDBS 5M MDBS 5.5M MDBS 6M MDBS 6.5M MDBS 8M MDBS 10M MDBS 12M MDBS 13M MDBS 14M MDBS 16M MDBS 18M MDBS 20M MDBS 22M MDBS 25M

HINGE DRILL BITS Self centering spring loaded drill bit allows for accurate drilling of hinge screw holes

PART No. HDB - 3 HDB - 5 HDB - 9 HDB - 12 HDB - 14

Ph: 07 - 3326 1500

DRILL SIZE 5/64 7/64 9/64 11/64 13/64

FOR SCREW #3, #4 #5, #6 #8, #9, #10 #12 #14, #16

Corner Chisel

Ideal tool for squaring corners of routered cuts e.g. Hinge Recess, etc.

B mm 65 65 65 65 65 95 125 125 125 125 125 125 125 125

C mm 110 110 110 110 110 160 210 210 210 210 210 210 210 210

A mm 5 5.5 6 6.5 8 10 12 13 14 16 18 20 22 25

PART No. MDBR 5M MDBR 5.5M MDBR 6M MDBR 6.5M MDBR 8M MDBR 10M MDBR 12M MDBR 13M MDBR 14M MDBR 16M MDBR 18M MDBR 20M MDBR 22M MDBR 25M

HSS COUNTERSINKS PART No. HCS 1 HCS 2 HCS 3 HCS 4

A mm 9.5 12.7 16 19

B mm 4 5.5 7 9

C mm 39 39 45 50

PLUG CUTTERS 1/4" shank

PART No. HPLG 08 HPLG 12 HPLG 16 HPLG 20

DIAMETER 1/4" 3/8" 1/2" 5/8"

Made of Quality Tool Steel

PART No. RCC 001

QUICK CHANGE CHUCK STEP DRILL SET Kit containing 3x 2 Flute, titanium coated HSS step drills with 1/4” quick change chuck. •Self starting. For use in range of materials 1x 13 steps – 1/8”-1/2” 1x 9 steps – 1/4”-3/4” 1x 6 steps – 3/16”-1/2”

PART No. HSD-3 Kit 1

For use with tools equiped with quick change shanks.

PART No. HQCC

SIZE 1/4

CONTOUR GAUGE For use in woodworking and other applications where a profile needs to be cut or replicated. • Simply press contour gauge against the shape required then cut to shape. • Sturdy metal construction PART No.

LENGTH

CONG-152

152mm (6”)

B mm 51 60 60 60 60 90 120 120 120 120 120 120 120 120

C mm 85 100 100 100 100 150 200 200 200 200 200 200 200 200

Established 1969

TEMPLATE GUIDE KIT - 10 PCE Precision machined brass template guides.

NEW

Perfect for following templates and jigs.

ROUTER BASE PLATE ADAPTOR KIT Predrilled to fit most routers. Made of clear plastic which allows the operator, in most cases, to see the templates when machining. Includes plate, centering pin and screws.

Ideal for intricate detail, box joint, pattern work etc.

NEW

Packed in plastic blow moulded case.

ACCESSORIES

PART No. Description TEGUK

10 PCE Template Guide Kit

Outside Diameter 5/16” 3/8” 7/16” 1/2” 5/8” 3/4” 51/64” 1” 1 3/8” Locknut

Inside Diameter 1/4” 9/32” 11/32” 13/32” 17/32” 21/32” 5/8” 25/32” 1 9/32”

Barrel Length 5/32” 5/16” 5/32” 5/16” 9/16” 9/16” 9/16” 3/8” 5/8”

Brass Guide not included

PART No. BAPLK

25 PCE DRUM SANDING KIT Includes: 5 Rubber Backed Drums 1/2”, 3/4”, 1”, 11/2”, 2” Diameter 2 x 80 Grit sanding sleeves to suit each drum size (10 Pcs) 2 x 120 Grit sanding sleeves to suit each drum size (10 Pcs)

Additional Template Guides available separately - (Not included in kit) PART No. TEGU5 TEGU10

Outside Diameter 1 1/4” 1 1/2”

Inside Diameter 1 5/32” 1 13/32”

Barrel Length 1/2” 1/2”

NEW

ROUTER DEPTH GAUGE

Email: Sales@cltoolcentre.com

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

A simple and easy to use router depth gauge that will reduce guess work and wasted timber. Clearly marked in 15 steps from 1/8” up to 1”.

PART No.

Ph: 07 - 3326 1500

PART No. RDG-1 DESCRIPTION

DSK25 25 Pce. Drum Sanding Kit DSKR80 Replacement Sanding Sleeve Pack 80 Grit (10 Pcs) DSKR120 Replacement Sanding Sleeve Pack 120 Grit (10 Pcs)

STEP GAUGE Make accurate setups for table saws, radial arm saws, etc., quickly and easily

MOUNTED POINTS 4 Kits with a range of shapes in a number of grit sizes for a variety of applications

PART No. SG-1

ROTARY RASPS NEW

5 Pce Rotary Rasp 6mm shank set includes a cylinder, 2 cones, ball, rounded cylinder For use on a range of applications

NEW PART No.

DESCRIPTION 5pce, 3mm Shanks, 2 x Cylinders, 1x Ball, 1 x Rounded Cone, 1 x Tear Drop 5pce, 6mm Shanks, 2 x Cylinders, 1x Ball, 2 x Cone on Cylinder

120

MOPOK206

20pce, 6mm Shanks, 11 x Cylinders, 3x Balls, 4 x Cone on Cylinder, 1 x Saucer, 1x Cone/Flat Top

MOPOK483

48pce, 3mm Shanks, 5 x Cylinders Ball, Rounded Cone, Tear Drop, (2 of each of the above in 3 grit sizes

60 120 360

MOPOK53 MOPOK56

PART No. RR 5

Grit

ACCESSORIES

Email: Sales@cltoolcentre.com

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ROUTER TABLE NEW

A sturdy, simple but very durable router table. The work top is made of MDF with melamine top. -

800x 610mm Table Top

10mm Thick Acrylic Insert

6mm Thick x 100mm High Alloy Fence

25mm Thick x 150mm High Sub-Fences

PART No. Description

PART No.

Description

MROUT1

MRM1

Router Table Package Includes: Router Table (MROUT1) and Mitre Gauge (MMIT1)

Router Table

MITRE GAUGE

NEW

Ph: 07 - 3326 1500

PART No. MMIT1

Fits the Carb-I-Tool Router Table (MROUT1)

ALUMINIUM INSERT PLATE An alter native to the acr ylic plate supplied with the router table or to fit into a custom made table. The 1/4” thick aluminium inser t plate provides a true flat surface and limits any plate sag that may be experienced with the use of heavy routers. This plate has pre marked (not pre drilled) marking holes to match popular routers. Supplied with levelling screws , 4 magnets, 3 inser t rings with screws to suit and a steel star ter pin to aid in the routing of cur ved pieces. (Approx 9”x12”) PART No. MALIP

ADJUSTABLE CLAMP

BAR CLAMP AND SPREADER

A general purpose clamp that has 7 jaw angles for a capacity range up to 180mm. Features a patented ratchet mechanism with quick release trigger. For use on a variety of clamping applications.

150mm Clamp Capacity. 165-350mm Spreading Capacity Quick Grip Release Handle

Capacity Range 1) 0 - 18mm 2) 0 - 45mm 3) 25 - 75mm 4) 58 - 110mm 5) 92 - 141mm 6) 123 - 168mm 7) 150 - 180mm

NEW

PART No. CL180

PART No. CL150

NEW

ADJUSTABLE CORNER CLAMPS MINI CORNER CLAMP!

Ideal for small picture frames. Made of plastic with a web strap that allows for up to 1m x 1m clamping

For use in making picture frames of any shape, gluing boxes together or for gluing trims without nailing. Now comes with Flexible Jaw Inserts to help hold those odd shaped items. Maximum Size: 900mm X 900mm (steel band) Replacement Jaws Pk 10

ACCESSORIES

(TVFLEX)

Replacement Corner Pieces Pk 4

(TVCP)

PART No. TV 149

PART No. TV 148

SAFETY AIDS A range of safety items designed to keep your hands away from blades and cutters.

PUSH STICK

LONG PUSH BLOCK

• 300mm long For use on router tables and sawbenches

• 400mm long x 70mm wide Made of durable, strong shatter proof plastic with a heavy duty rubber foam pad that will not mark the workpiece.

Email: Sales@cltoolcentre.com

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

PART No. PBL-1

PART No. PS-1

Ph: 07 - 3326 1500

SHORT PUSH BLOCKS 150mm long x 75mm wide. Both with heavy duty rubber foam pads.

OFFSET STRAIGHT Comfortable straight handle

PART No. PBSO-1

PART No. PBSS-1

TABLE SAW MATE 8 tools in 1 – Depth Guage – 230mm Rule – 154mm Hook Rule – 90 deg. Square – 45 deg. guage for mitre cuts – 30 & 60 deg. marks for setting up angles – Centre Finder – Push Stick

PART No. SMT-1

This block has an angled contoured handle for maximum grip and operator safety

FEATHERBOARD WITH ANGLE MEASURE Can be used to control passage of timber horizontally on router tables or vertically on the fence as a hold down. Spirit level indicates exact angle of timber passage.

PART No. FAM-1

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

ACCESSORIES

Email: Sales@cltoolcentre.com

Established 1969

ACCESSORIES PVA Woodworking Glue

WOOD JOINING BISCUITS Compressed straight grained wood biscuits that expand on contact with water based glue. Ideal for furniture, cabinates and other special woodworking applications

NEW

PART No. PART No. PVA 250 PVA 500

SIZE

BISC0 150 BISC10 125 BISC20 100

250ml 500ml

QUANTITY 150 Pcs 125 Pcs 100 Pcs

Biscuit Size

For Joining

0 (48 x 16 x 4mm) 10 (54 x 19 x 4mm) 20 (57 x 24 x 4mm)

8-12mm Timber 13-18mm Timber 19mm+ Timber

Bulk quantities available on request.

DIAMOND SAW BLADES CONTINUOUS RIM

For fast, smooth cutting in thin ceramics, stone, etc. PART NO. DSCR 105 DSCR 115 DSCR 125 DSCR 180 DSCR 230

DIAMETER mm in. 105 4 115 4-1/2 125 5 180 7 230 9

BORE SIZE 20/16 22.23 22.23/20 22.23/20/16 25.4/22.23

DIAMOND DEPTH mm 5 5 5 5 5

KERF mm 1.7 1.9 1.9 2.2 2.4

DIAMOND DEPTH mm 7 7 7 7 7

KERF mm 1.7 1.9 1.9 2.2 2.4

SEGMENTED RIM

Ph: 07 - 3326 1500

Universal blade for concrete, brick, masonry, etc. PART NO. DSSR 105 DSSR 115 DSSR 125 DSSR 180 DSSR 230

DIAMETER mm in. 105 4 115 4-1/2 125 5 180 7 230 9

BORE SIZE 20/16 22.23 22.23/20 22.23/20/16 25.4/22.23

TURBO

For fast, smooth cutting in a wide range of masonry applications. Cooling holes control heat build-up. PART NO. DSTR 105 DSTR 115 DSTR 125 DSTR 180 DSTR 230

DIAMETER mm in. 105 4 115 4-1/2 125 5 180 7 230 9

BORE SIZE

DIAMETER mm in. 105 4 115 4-1/2 125 5 180 7 230 9 350 14

BORE SIZE

20/16 22.23 22.23/20 22.23/20/16 25.4/22.23

DIAMOND DEPTH mm 7 7 7 7 7

KERF mm 1.78 2 2 2.2 2.8

DIAMOND DEPTH mm 7 7 7 7 7 7

KERF mm 1.7 2 2 2.2 2.5 2.8

LASER WELDED

For long life in most applications PART NO. DSLW 105 DSLW 115 DSLW 125 DSLW 180 DSLW 230 DSLW 350

20/16 22.23 22.23/20 22.23/20/16 25.4/22.23 25.4

ACCESSORIES

ACCESSORIES DIAMOND POINTS Ideal for carving and engraving on wood, ceramics, glass and other hard materials.

20 pce - 1/8” shank PART No. DPS-20

CONTENTS Cylindricals, Ball End Cylindrical, Balls, Pointed Cones, Flame, Inverted Taper

ADJUSTABLE HOLE SAW For glazed ceramic wall tiles Cuts holes from 10mm-100mm in most ceramic wall tiles

50 pce - 1/8” shank PART No. DPS-50

10 pce - 1/4” shank

CONTENTS Cylindricals, Ball End Cylindricals, Cones, Inverted Cones, Pointed Cones, Flames, Balls, Tapers, Square Wheels, Radius Wheels

PART No. DPS-10

CONTENTS Cylindricals, Ball, Cone, Taper, pointed cones

GLASS AND TILE DRILLS For drilling glass and tiles. Carbide Tipped. (Not suitable for toughened glass) A

Email: Sales@cltoolcentre.com

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

B C

PART No. TATC-100

A 3 4 5 6 8 10 12

B 6.2 8.2 10.2 12.2 16.2 20.2 20.2

C 55 55 55 65 75 90 90

Ph: 07 - 3326 1500

CARBIDE TIPPED

PART No. TGT3M TGT4M TGT5M TGT6M TGT8M TGT10M TGT12M

SHARPENING STONES Handy size Diamond Whetstones for a range of sharpening applications. Including Knives, scissors, axes and other tools

side 1

side 2

PART No. DWS-331

3 Whetstones (180, 260, 360 grit) each 76mm x 25mm

PART No. DWS-162

1 Double sided Whetstone 150mm x 50mm with handle

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Email: Sales@cltoolcentre.com

SPECIALISED LUBRICANTS By employing the latest advances in tooling enhancement technology these specially formulated lubricants bond to the microstructure of the tool surface giving added lubricity as well as reducing friction and cutting temperature. This unique bond also protects the cutting edge against the action of corrosive materials. These products are non toxic, non hazardous and biodegradable.

Opti-Cut - SS

Opti-Cut - XL

Premium blade lubricant for woodcutting applications. Ideal for saw blades, drills, band saws, hole saws, planes, Moulder heads etc. Just spray onto the cutting tool for a cooler and cleaner cut with less friction prevents fouling caused by pitch build up. Suitable for all cutting surfaces.

Specialised lubricant for solid surface applications allows cutting edges to travel through solid surface materials with less friction and heat. Opti-Cut-SS seals the cutting surface preventing the action of corrosive acids and resins from chemically etching the cutting surface.

PART No. OCXLS - 8B

PART No. OCSSS - 8B

236ml Spray Bottle

Blade Saver

The all in one saw blade and router bit cleaning system. Use to remove pitch, gum and resins from all cutting surfaces

Top Saver

Ph: 07 - 3326 1500

Rust remover / Lubricant / Surface sealant / Conditioner. Completely removes rust and corrosion on metal surfaces. Reduces friction, eliminates binding and repels moisture.

Cutting edge lubricant for non ferrous materials (aluminium, brass copper etc.) For cooler cutting with less friction. Increases lubricity, reduces the chance of the waste material adhering to the cutting edge. Size 236 ml OCNFS - BULK 3.8 L PART No. OCNFS - 8B

236ml Spray Bottle Also available in 3.8 Litre Bulk Bottle

236ml Spray Bottle

PART No. OTOP - KIT

Opti-Cut - NF

PART No. OBS - KIT

Tool Saver

Everything you need to keep your tools looking and working like new. All in one kit Contains: 1x 59ml Bottle of Router Bit lubricant 1x 59ml Bottle of Opti-Cut XL lubricant (see above) 1x 59ml Bottle of Top Saver (see above) 1x 59ml Bottle of Blade Saver (see above) 1x 44ml Bottle of Dri-Tool Lubricant This lubricant penetrates deep into the pores of the surface structure to clean and remove contaminants. Leaves the surface sealed and gives high lubricity. Ideal for bearings, slide screws, locks, etc.

PART No. OTS - KIT

PRODUCT RANGE WOODWORKING PRODUCTS CARB-I-TOOL ROUTER BITS O Solid Carbide O Carbide Tipped O Diamond Tipped O Diamond Coated O Replaceable Insert O High Speed Steel 3D ROUTER CARVER CARBIDE TIPPED SAW BLADES O Carb-I-Tool Bench Range O Trade Blade Portable Range CARB-I-TOOL O Hand Planer Blades O TCT and HSS Buzzer Blade O Carbide Tipped Buzzer Blade O Wood Boring Drills (TCT and Diamond Tipped) O TCT Holesaws O Indexable Inserts

CARB-I-TOOL O Carbide Tipped Hole Saws O Drill / Countersink Bits O Indexable Inserts O HSS Buzzer Blade OTHER PRODUCTS O Handsaws O Drill/Countersink Bits O Jigsaw Blades O Reciprocating Saw Blades O Corner Chisel O Circle Cutter O Forstner Bits O Auger Bits O Brad Point Bits O Drill Saws O Expansion Bits O Multi-Angle Drill Bits O Rosette Cutters O Spade Bits O Masonry Drill Bits

O O O O O O O O O O O O O O O O O O O O O

Diamond Saws (Masonry) Chisels Sharpening Stones Diamond Points Router and Saw guages Glass and Tile Drills Safety Aids Specialised Lubricants All Purpose Magic Saw Hollow Mortise Chisels Tempate Guides Router Base Plate Adaptor Drum Sanding Kit Rotary Rasps Mounted Points Router Table Mitre Gauge Safety Switch Bar Clamp/Spreader PVA Glue Wood Joining Biscuits

CARB-I-TOOL (AUST.) PTY. LTD. ACN. 005 203 289

ABN. 26 005 203 289

12 Levanswell Road, Moorabbin, Victoria 3189, Australia. Telephone: (03) 9555 2966 Facsimile : (03) 9555 8695 International Tel: 61 3 9555 2966 International Fax: 61 3 9555 8695 Email: sales@carbitool.com.au Web Site: www.carbitool.com.au JANUARY 2012

Itâ&#x20AC;&#x2122;s a BIT better with CARB-I-TOOL

ENGINEERING PRODUCTS

CEMENTED CARBIDES O Ground Rods O Strips & Tips O Disposable Inserts CARB-I-TOOL SOLID CARBIDE TOOLS O Burs O Slot Drills O End Mills O Carbide Drills O Dee Bits CARB-I-TOOL O Diamond Grinding Wheels O Diamond Lapping Compounds O HSS Metal Cutting Saws FOLEY - BELSAW O Range of saw and cutter sharpening equipment