Faster. Easier. Better. ENDS JUNE 30, 2016
SYSTEM SOLUTIONS
SYSTEM
Pair a Festool power tool with a dust extractor and save $100*
* Refer to page 3 for T&C’s
Bonus guide rail bags
Sander specials
see page 4
see page 12
BONUS
BONUS Lim
te d
i
Gu ide Rail Bag
F
S
Limited edition jigsaw blades see page 9
e eS Ed ad ition Jigsaw Bl
t
Ph: 07 - 3326 1555
Email: Sales@cltoolcentre.com.au
6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599 Email: Sales@cltoolcentre.com.au
www.festool.com.au
DUST FREE SYSTEM SOLUTIONS
HEPA FILTER
Ph: 07 - 3326 1555
Email: Sales@cltoolcentre.com.au
6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599 Email: Sales@cltoolcentre.com.au
The Festool flat filter saves space, allowing full use of the container’s capacity
Whether it’s a quick saw cut or surface treatment, the extractor automatically turns on and off with the power tool
Keep organised with an integrated systainer docking station - connect and stack all your systainers for easy transport and storage
Store away the hose for fast pack up and easy transport
To find the right system solution for your application, be sure to visit your local Festool Dealer. Festool Premium Shops offer the complete range and expert advice with an in-store test centre where you can try before you buy. Partner Plus stores also offer a comprehensive product range with knowledgeable trained staff ready to help you.
2
Faster. Easier. Better.
SYSTEM
CT Mini
CT Midi
CT 26
CT 36
CT 36 HD
7.5 Litre / 584155 Compact and mobile
15 Litre / 584164 Portable worksite extractor
26 Litre / 583494 For the workshop or the worksite
36 Litre / 583495 Compact but with large volume
36 Litre / 584169 Ideal for concrete dust
Email: Sales@cltoolcentre.com.au
6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599 Email: Sales@cltoolcentre.com.au
PAIR ANY FESTOOL POWER TOOL WITH A DUST EXTRACTOR & SAVE $100* 160mm Plunge Cut Saw with FS 1400 guide rail TS 55 / 561655
$1,748
$1,798
$2,168
$2,268
$2,449
210mm Plunge Cut Saw with FS 1400 guide rail TS 75 / 561512
$2,164
$2,214
$2,584
$2,684
$2,865
Jigsaw PS 300 / 561444 PSB 300 / 561454
$1,249
$1,299
$1,669
$1,769
$1,950
Orbital Sander ETS 150/3 / 571905 ETS 150/5 / 571919
$1,214
$1,264
$1,634
$1,734
$1,915
$1,394
$1,444
$1,814
$1,914
$2,095
$1,298
$1,348
$1,718
$1,818
$1,999
$1,298
$1,348
$1,718
$1,818
$1,999
$1,864
$1,914
$2,284
$2,384
$2,565
Linear Sander LS 130 / 567770
Delta Sander DTS 400 / 567870
65mm Planer EHL 65 / 574559
Router OF1400 / 574346
Diamond Grinder RG 80 / 768973
Diamond Grinder RG 130 / 768976
Not Recommended
$2,505*
Not Recommended
$2,525*
Ph: 07 - 3326 1555
Example of special prices shown in matrix below
Terms & Conditions The prices shown in the matrix above reflect the special system price with $100 saving on the dust extractor + Festool power tool combination. The system saving is strictly available on the featured dust extraction models, when paired with a Festool power tool that is compatible with dust extraction (excludes drills and other extractors). This offer is only available via dealer stores (not available online).
www.festool.com.au
3
Ph: 07 - 3326 1555
Email: Sales@cltoolcentre.com.au
6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599 Email: Sales@cltoolcentre.com.au
SPLINTER-FREE SAWING SOLUTIONS
The attachable splinterguard and guide rail work together to produce smooth, splinter free cuts on both sides of the blade.
The guide rail works with the TS Saw to ensure perfect cuts. Simply scribe a line, align the guide rail and cut.
Festool guide rails are available in eight different lengths from (800 - 5000 mm), and can be connected together with guide rail connectors.
SYSTEM
PAIR UP A SAWING SYSTEM WITH A DUST EXTRACTOR & SAVE $100*
* Refer to page 3 for T&C’s
160mm Plunge Cut Saw TS 55 with FS 1400 guide rail | 561655
210mm Plunge Cut Saw TS 75 with FS 1400 guide rail | 561512
• • • • • •
• • • • • •
Power 1,200 W Cutting depth 0-55mm Splinterguard 160mm fine tooth saw blade FS 1400/2 guide rail SYS 4 T-LOC systainer
$1,049 4
Power 1,600 W Cutting depth 0-75mm Splinterguard 210mm saw blade FS 1400/2 guide rail SYS 4 T-LOC systainer
$1,465
160mm Cordless Plunge Cut Saw TSC 55 with FS 1400 guide rail | 201577 • • • • • • • •
Power up to 36V Cutting depth 0-55mm 2 x 5.2Ah batteries TCL 3 charger Splinterguard 160mm fine tooth saw blade FS 1400/2 guide rail SYS 5 T-LOC systainer
$1,275 Faster. Easier. Better.
Email: Sales@cltoolcentre.com.au
6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599 Email: Sales@cltoolcentre.com.au
Sawing Accessories Gecko Suction Clamp | 493507 $142 Secure your guide rail to almost any non-porous flat surface using the Gecko Suction Clamping Set. For the full range of Festool clamping options visit www.festool.com.au
Premium Quality Guarantee
Guide Rail Accessory Set | 497657 $345 Comes with 2 FSZ clamps, 1 deflector, 1 combination bevel, 2 guide rail connectors, 1 splinter guard, 1 kick back stop.
NEW
Parallel side fence | 495717 $330 Guide extension | 495718 $199
From cutting rafters and beams, to ripping and trimming, or melamine shelving, plumb cuts and birdsmouth applications, the HKC with FSK 420 cross-cut rail will be your new go-to saw.
Ph: 07 - 3326 1555
For consistent rip cuts use the parallel side fence to eliminate markting out each cut for accurate cut each time.
Find sawing application videos online at www.festool.com.au
www.festool.com.au
Power 18V Cutting depth 0-55mm 2 x 5.2Ah batteries TCL 3 charger Splinterguard Standard saw blade FSK 420 guide rail SYS 4 T-LOC systainer
$1,089
42
K
*Bonus applies to TS plunge saw set models with FS 1400 guide rails
• • • • • • • •
FS
3 Gu 66 4 ide Rail Bag
F
S
57
$115
$99
0G
00 16 0
Valued at
Valued at
160mm Cordless Circular Saw HKC 55 with FSK 420 guide rail | 201580
uide Rail Bag
2
*Bonus applies to HKC 55 set with FSK 420 rail
5
4MM IN ONE PASS
The spiral blade with drawing cut provides the highest material removal at 4mm in one pass and a smooth planing pattern.
SYSTEM
The EHL planer has a lower operating noise level, compact design and a low centre of gravity for comfortable use.
PAIR THE 65MM PLANER WITH A DUST EXTRACTOR & SAVE $100*
*Refer to page 3 for T&C’s
65mm One Handed Planer EHL 65 | 574559 • Parallel side fence • SYS 2 T-LOC systainer
Valued at
$73
af
et yg
ure
sS Bonu
200358
$599
ea s
Ph: 07 - 3326 1555
Email: Sales@cltoolcentre.com.au
6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599 Email: Sales@cltoolcentre.com.au
6
lass e
M pe a T s F28804
Faster. Easier. Better.
Precise depth adjuster takes out the guess work and ensures accuracy to 1/10mm.
SYSTEM
Weighing less than 5kg, the 1400W machine is uniquely versatile when it comes to recessing fittings or routing with templates.
PAIR THE 1400W ROUTER WITH A DUST EXTRACTOR & SAVE $100* 70mm Plunge Router OF 1400 | 574346 • • • •
* Refer to page 3 for T&C’s
Never lose another router bit!
1400 watt 70mm plunge depth 4.5kg SYS 4 T-LOC systainer
$1,165
Valued at
$135 u
Cu
69 5
Ro
te r
tter Systainer
7 49
*cutters not included
www.festool.com.au
7
Ph: 07 - 3326 1555
PROFILING, TRENCHING & REBATING
Email: Sales@cltoolcentre.com.au
6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599 Email: Sales@cltoolcentre.com.au
Email: Sales@cltoolcentre.com.au
6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599 Email: Sales@cltoolcentre.com.au
MULTI-TOOL FLEXIBILITY
See it in action www.festool.com.au
Choose from a range of blades
10% OFF selected Vecturo blades
The unique position guide and depth stop set improves the accuracy of cut outs and plunge cuts in plasterboard, wood, composite materials and laminate.
Power through challenging tasks quickly with hassle-free blade changes and variable speed.
Position Aid Plunge Adapter Set |500251 $210
HSB 50/35 HSB 50/45 HSB 50/55 HSB 50/65 500128 $32.40 500132 $33.30 500134 $34.20 500135 $30.60 HSB 100/HSC | 500136 $81.90
UNIVERSAL
Valued at
$313
USB 50/35 500130 $27.90
USB 50/65 USB 78/32 USB 78/42 500131 $35.10 500129 $27 500133 $27.90
METAL
058
BONUS
un ive rsa l) FC 1
Ph: 07 - 3326 1555
WOOD
Multi-Tool Vecturo OS 400 | 563010
$875 Vecturo Multi Tool Set | F28404 $1,125
8
w Sa
• Universal saw blade USB 78/32/BI • SYS 2 T-LOC systainer
Bl ad
es
(4 x w ood, 1 x m
x l4 eta
MSB 50/35 | 500126 $33.30
SPECIALIST SSB 32 500137 $104.40
SSP 56,5/1 500138 $28.80
Faster. Easier. Better.
Fastfix blade change system makes switching between cutting different materials easy.
SYSTEM
Triple blade guidance system with parallel adjustable carbide jaws prevents the blade from running off course to deliver accurate cuts.
PAIR A JIGSAW WITH A DUST EXTRACTOR & SAVE $100* *Refer to page 3 for T&C’s
The effective splinterguard ensures smooth, splinter-free cuts and prevents time consuming finishing work.
SAVE 10%
on selected jigsaw blades
BONUS$114
www.festool.com.au
te d
i
$550 each
Lim
• Power consumption 720W • Cutting depth in wood: 120mm • Stroke rate: 1,000 - 2,900 • SYS 1 T-LOC systainer
t4
Pendulum Jigsaw PSB 300 D Handle | 561454 or PS 300 Barrel Grip | 561444
99 501
Valued at
e eS Ed d a ition Jigsaw Bl
Available on: 486563, 486963, 486548, 486546, 486549, 499476, 486547, 499477, 499478
9
Ph: 07 - 3326 1555
PRECISION AROUND EVERY CURVE
Email: Sales@cltoolcentre.com.au
6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599 Email: Sales@cltoolcentre.com.au
Email: Sales@cltoolcentre.com.au
6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599 Email: Sales@cltoolcentre.com.au
POWERFUL & VERSATILE DRILLING
36 month warranty on drills, batteries & chargers
See it in action www.festool.com.au
Drilling Accessories
Ph: 07 - 3326 1555
FastFix Right Angle Chuck | 490293 $113
The FastFix interface system means the T and C 18 can do the job of numerous drills - with the quick switch of a chuck attachment.
Drill or drive between studs, joists, cabinet or drawer spaces, or virtually any constrained space with the angle attachment. Centrotec 3-8mm Wood Drill Bit Set | 493648 SPECIAL $69
Ratchet 1/4”Set | 497881 $189
BONUS • • • •
Centrotec tool chuck Centrotec bit holder Fastfix keyless chuck SYS 2 T-LOC systainer
$399 each 10
s Sy
Drill Driver Basic T Series T18 | 564605 or C Series C18 | 564609
FastFix Eccentric Offset Chuck | 490294 $113
lit eU
Valued at
$99
ni Torch 76907
FastFix Countersink Depth Stop Chuck | 493539 $118
Centrotec 3-8mm Mini Wood Spiral Drill Bit Set | 495130 SPECIAL $69
TCL 3 Charger | 499383 $65
18V 5.2Ah Li-Ion Battery | 500435 $120
9
Faster. Easier. Better.
The unique vibration dampening offers great working comfort for long periods of non-tiring work.
Eliminate dust at the source using a drilling dust nozzle. No cleaning required after job is complete.
BUILDING HAND TOOLS
ARTICLE CRITERIA
DESIGN
Great design, great features and great accessories
★★★★★
ERGONOMICS
Feels great in your hand – for long periods too!
★★★★
SPEED
Very fast, controlled drilling
★★★★★
BATTERY RUN TIME
Batteries last a long time. 4.2 amp/h with brushless motor
★★★★
RECHARGE TIME
Fast battery recharge
★★★★
TORQUE
10/25NM
★★★★
VIBRATION
Vibration is soaked up very nicely with suspension
★★★★★
EASE OF OPERATION
Very easy to use, changeover bits, and pack away in box
S
$509
DS
Drilling Dust Nozzle | 500483 $43
www.festool.com.au
★ ★ ★ power You can instantly feel ★the RRP $469.00 and it comes in a Systainer with depth stop and of the brushless motor but it’s additional side handle Rubber frame, side handle, depth stop allcontrol fit very well into anyou organised case the have with these with a photo of how it all packs away nicely into the Systainer. There is also space in the Systainer for optional extras: charger, batteries, SDS adapter and drills that’s amazing drilling dust nozzle
OVERALL LIKES
All of the above!
OVERALL DISLIKES
This drill is a little more expensive... I guess you get what you pay for! Definitely worth it.
OVERALL STAR RATING
OVERALL STAR RATING
24
• Depth stop • Additional side handle • SYS 2 T-LOC systainer
(Out of five)
★★★★★
ACCESSORIES
$113
STAR RATING
Very well-balanced tool
PRICE
18V Rotary Hammer BHC 18V Basic | 564606
Operator Comments Report
BALANCE
BONUS Valued at
Overhead work is made easy with impressive vibration reducing technology in a lightweight 2.4kg design
The Germans nailed this one on the head!
9 99 Dril 4 t l Bit Se
Check out the BCM review on the BHC 18 Cordless Rotary Hammer www.festool.com.au WWW.TRADEMAGS.COM.AU/BCM 43
11
Ph: 07 - 3326 1555
COMPACT & POWERFUL ROTARY HAMMER
Email: Sales@cltoolcentre.com.au
6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599 Email: Sales@cltoolcentre.com.au
Ph: 07 - 3326 1555
Email: Sales@cltoolcentre.com.au
6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599 Email: Sales@cltoolcentre.com.au
SUPERIOR SURFACE FINISH
Ergonomic design and soft grip handle - makes thorough sanding of flat surfaces and profiles easy.
SYSTEM
For longer lasting pads, abrasives and dust free results connect to a Festool dust extractor.
Smooth operation is assured with soft start up, constant speed and overload protection.
PAIR A ETS SANDER WITH A DUST EXTRACTOR & SAVE $100*
* Refer to page 3 for T&C’s
150mm Eccentric Sander ETS 150/3 | 571905 or ETS 150/5 | 571919 • • • • •
Soft StickFix sanding pad ø 150mm StickFix abrasive Sanding stroke: available in 3mm and 5mm Weight 1.8km Fixed lead in carton
SPECIAL $515 SAVE
$44
12
Faster. Easier. Better.
SANDING THE FINER DETAILS
80mm x 133mm Custom Profile Back Up Pad 490780
Email: Sales@cltoolcentre.com.au
6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599 Email: Sales@cltoolcentre.com.au
SAVE
Customise your own pad to suit the profiles you need to sand, from hand rails to tight angles.
SYSTEM
Create your own sanding pad to match custom profiles. Shape your own profile with this blank pad to the desired profile.
Special $75
Ph: 07 - 3326 1555
$15
Power through detail sanding, tight corners, window frames and overhead surfaces.
PAIR A DETAIL SANDER WITH A DUST EXTRACTOR & SAVE $100*
*Refer to page 3 for T&C’s
Abrasive storage solution
BONUS $99 • • • •
Sanding stoke: 4mm StickFix sanding profile pad 90° sanding pad SYS 1 T-LOC systainer
SPECIAL $695 www.festool.com.au
SAVE
$90
Orbital Sander DTS 400 | 567870 • Sanding stoke 2mm • StickFix sanding pad • SYS 1 T-LOC systainer
$599
TF -S SYS
Linear Sander Duplex LS 130 | 567770
49 76 86
Valued at
De / er lta n i a 100x 150 Syst
*Only available with the DTS 400 sander
13
Ph: 07 - 3326 1555
Email: Sales@cltoolcentre.com.au
6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599 Email: Sales@cltoolcentre.com.au
CONCRETE GRINDING SOLUTIONS
Quickly and thoroughly overcome any Smooth start up guarantees a gentle material removal task, eliminating the need increase in speed, and continuous for hard manual work with other tools. temperature monitoring for protection.
SYSTEM
The folding segment allows you to work close to the edges and walls.
PAIR A DIAMOND GRINDER WITH A DUST EXTRACTOR & SAVE $100*
* Refer to page 3 for T&C’s
80mm Diamond Grinder RG 80 | 768973
130mm Diamond Grinder RG 130 | 768976
• • • • •
• • • • •
Rated input: 1100W No-load speed: 2,000-5,900 rpm Grinding disc: 80mm Weight 3.2kg SYS 3 T-LOC systainer (toolhead not included)
$1,105 14
Rated input: 1,600W No-load spreed: 3,000 - 7,700 rpm Grinding disc: 130mm Weight 3.8kg SYS 5 T-LOC systainer (tool disc not included)
$1,125 Faster. Easier. Better.
Email: Sales@cltoolcentre.com.au
6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599 Email: Sales@cltoolcentre.com.au
15% OFF Grinding Discs *Discount prices shown below
DIA HARD Resurfacing and removal of old weathered concrete, removing expoy resins, roughening smooth surfaces. 80mm Disc inc tool holder | 767983 $246.50 130mm Disc Premium Disc | 768017 $187 130mm Standard Disc | 499972 $140.25
DIA ABRASIVE For very sandy materials, screed, green concrete, adhesive on screed, lime sand brick and foam mortar. 80mm Disc inc tool holder | 767984 $246.50 130mm Disc | 768018 $187 130mm Standard Disc | 499973 $140.25
DIA STONE For very hard materials and hard concrete. 130mm Disc | 769166 $187
DIA THERMO
With efficient dust extraction, leave the work area clean and tidy, protect your health and extend the useful life of the machine and the diamond discs.
Ph: 07 - 3326 1555
For removing thermo-elastic and soft materials eg elastic adhesive for PVC, wooden or parquetry flooring. 80mm Disc inc tool holder | 769082 $322.15 130mm Disc | 768023 $250.75
DIA UNI Resurfacing and removing paints and coatings from concrete surfaces and plaster. 80mm Disc inc tool holder | 769169 $246.50 130mm Disc | 769167 $187
SERVICE ALL INCLUSIVE
36L Heavy Duty Concrete Specialist Autoclean Dust Extractor CTL 36 HD | 584169 • • • •
Power consumption: 350 - 1200W Airflow max: 3,900 l/m Max vacuum: 24,000 Pa Container capacity: 36 litres
$1,500 www.festool.com.au
Rapid Repair Service When your register your tool within 30 days after purchase at www.festool.com.au/sai
15
Email: Sales@cltoolcentre.com.au
6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599 Email: Sales@cltoolcentre.com.au
Faster. Easier. Better.
GET YOUR STORAGE SORTED
Store all your nails, dowels, screws, blades, drill and more, keeping everything you need close to h and easy to transport.
Ph: 07 - 3326 1555
Pull Out Shelf SYS-AZ Set Easy pull out drawers suitable for setting up your own systainer arrangement. Simply install a 32mm hole pattern.
$73 Single Shelf | 500692 $345 5 Pack | 500767
SYS Roll Mobile Cart For Systainers | 498660
$235
4 drawer | 491522 6 drawer | 491984 9 drawer | 491985 12 drawer | 491986
$235 each Systainer SYS 1 T-LOC With MFT Timber Lid | 500076
$119 Systainer Tool Boxes SYS-TB -2 | 499550
$92
Trolley for SYS 1-5 T-Loc Systainer | 495020
$125
Email: Sales@cltoolcentre.com.au
Sortainers Storage Box
Ph: 07 - 3326 1555
bits hand
6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599 Email: Sales@cltoolcentre.com.au