Cab Controls How to Change Settings in CEBIS

6

Service Maintenance

When carrying out any service operation, make sure that the correct procedures are followed. See operator’s manual chapter 9.1 for the complete service requirements. In CEBIS, there is also a quick guide on the service requirements.

Grease the appropriate grease points as per the operator’s manual - it is recommended to grease the rotor bearings every day. Ensure that the whole machine is blown down daily.

Do not unscrew the nuts from the threaded spindle.

Slacken off nuts (2) and (3).

Twist nut (3) until the ends of gauge rods (4) are positioned in front of one another without play.

Lock nuts (2) and (3) together.

WARNING!

Components are tensioned due to the force of a relieving spring, incorrect removal may result in injury.

Check if tube (4) makes contact at position (B) without pressure. Slacken off nuts (5). Turn nuts (5) until tube (4) makes contact at position (B) without pressure. Lock the nuts (5).