Passive RF Equipment Catalogue
The most important thing we build is trust
RF Splitters and Combiners Directional and Hybrid Couplers Cross-band Couplers
Power Taps Attenuators Load Terminations
Passive Equipment Catalogue CONTENTS LOW POWER SPLITTERS 120-240MHz, N type Connectors, 2 Way ...................................................... 300-500MHz, N type Connectors, 2, 3 & 4 Way ............................................ 300-960MHz, N type Connectors, 2, 3 & 4 Way ............................................ 800-2500MHz, 7/16 DIN Connectors, 2, 3 & 4 Way ...................................... 700-2700MHz, N type Connectors, 2, 3 & 4 Way ..........................................
4 5 6 7 8
SPLITTER/COMBINERS 68-470MHz, N type Connectors, 2 Way ........................................................ 9 140-470MHz, N type or 7/16DIN Connectors, 2 Way .................................. 10 700-2700MHz, 7/16 DIN Connectors, 2, 3 & 4 Way .................................... 11 700-2700MHz, N type Connectors, 2, 3 & 4 Way ........................................ 12
DIRECTIONAL COUPLERS 120-240MHz, 6 & 10dB, N type Connectors ................................................ 13 300-500MHz, 6 to 30dB, N type Connectors ............................................... 14 300-960MHz, 6 to 30dB, N type Connectors ............................................... 15 700-2700MHz, 5 to 30dB, N type Connectors ............................................. 16 700-2700MHz, 5 to 30dB, 7/16 DIN type Connectors ................................. 17 380-2700MHz, 6, 10, 15, 20 & 30dB Tap ..................................................... 18 140/470MHz, 6 & 10dB Tap ......................................................................... 19 140/470MHz, 10 & 30dB Tap ....................................................................... 20 150/2200MHz, 6, 10, 15, 20 & 30dB Tap ..................................................... 21
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 Š Cobham Wireless
www.cobham.com/wireless
Page 2
Passive Equipment Catalogue CONTENTS 3 dB HYBRID COUPLER/COMBINERS 120-240MHz, N type Connectors, 30dB Minimum Isolation .................... 300-500MHz, N type Connectors, 35dB Minimum Isolation ........................ 300-960MHz, N type Connectors, 23dB Minimum Isolation ........................ 800-960MHz, N type or 7/16 DIN Connectors, 35dB Minimum Isolation .... 700-2700MHz, N type Connectors, 22dB Minimum Isolation ...................... 1710-2200MHz, N or 7/16 DIN Connectors, 30dB Minimum Isolation ........
22 23 24 25 26 27
CROSSBAND COUPLERS/DIPLEXERS 500/800MHz, N or 7/16 DIN Connectors, 50dB Minimum Isolation ............ 490/650MHz, N Connectors, 40dB Minimum Isolation ................................ 108/143MHz, N Connectors, Isolation >30dB ............................................. 250/380MHz, N Connectors, Isolation >30dB ............................................. 1000/1700MHz, N type Connectors, Isolation >50dB .................................. 1000/1710MHz, 7/16DIN Connectors, Isolation >47dB ...............................
28 29 30 31 32 33
MULTI-BAND LOW LOSS POWER TAPS, 700-2700MHz ..................
34
LOW & MEDIUM POWER LOAD TERMINATIONS ............................
35
HIGH POWER LOAD TERMINATIONS ..............................................
36
COAXIAL FIXED ATTENUATORS .......................................................
37
ABOUT COBHAM WIRELESS ..........................................................
38
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 Š Cobham Wireless
www.cobham.com/wireless
Page 3
Passive Equipment Catalogue LOW POWER SPLITTER
120-240MHz, N type Connectors, 2 Way
50Watt Average Power 20dB Isolation, Minimum Minimal RF Insertion Loss High Reliability Environment IP65
The Cobham Wireless series of Low Power Splitters is designed to evenly split power cellular signals with minimal reflections or loss. All units are sealed to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The device can be used with antennas, leaky cable systems and wireless base stations. Part Number Frequency Band Split Maximum Insertion Loss Split Loss Maximum VSWR Average Power Rating Minimum Isolation Impedance Temperature Range Environment Housing Connectors DC transmission Mass
90-851402 120 - 240MHz 2 way 0.3dB 3 dB 1.20:1 50W 20dB 50 Ohm -25ºC to +75ºC IP65, RoHS compliant Passivated Aluminium or powder paint N type female Between all ports 625g
99
79
40
89
120
Ø 4.5
168 22
204
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 4
Passive Equipment Catalogue LOW POWER SPLITTERS
300-500MHz, N type Connectors, 2, 3 & 4 Way
50Watt Average Power 20dB Isolation, Minimum Minimal RF Insertion Loss High Reliability Environment IP65
The Cobham Wireless series of Low Power Splitters is designed to evenly split power cellular signals with minimal reflections or loss. All units are sealed to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The device can be used with antennas, leaky cable systems and wireless base stations. Part Numbers Frequency Band Split Maximum Insertion Loss Split Loss Maximum VSWR Average Power Rating Minimum Isolation Impedance Temperature Range Environment Housing Connectors DC transmission Mass
90-851202 300 - 500MHz 2 way 0.3dB 3dB
90-851203 90-851204 300 - 500MHz 300 - 500MHz 3 way 4 way 0.5dB 0.4dB 4.8dB 6dB 1.20:1 50W 20dB 50 Ohm -25ºC to +75ºC IP65, RoHS compliant Passivated Aluminium or powder paint N type female Between all ports 400g 720g 800g
158
99
109 30
80 90
70
38
90-851203 90-851202
119
30
22
148
Ø 4.5
Ø 4.5
103 113
194 22
148.6
121
141
30 30
90-851204
131
30
130
Ø 4.5
140 176
22
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 5
Passive Equipment Catalogue LOW POWER SPLITTERS
300-960MHz, N type Connectors, 2, 3 & 4 Way
Dual-Band Frequency Range, TETRA & Cellular 50Watt Average Power 20dB Isolation, Minimum Minimal RF Insertion Loss High Reliability Environment IP65
The Cobham Wireless series of Low Power Splitters is designed to evenly split power cellular signals with minimal reflections or loss. All units are sealed to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The device can be used with antennas, leaky cable systems and wireless base stations. Part Numbers Frequency Band Split Maximum Insertion Loss Split Loss Maximum Reflected Power Maximum VSWR Average Power Rating Minimum Isolation PIM, Passive IM Impedance Temperature Range Environment Housing Connectors DC transmission Mass
90-851302 300 - 960MHz 2 way 0.3 dB 3dB 5W
90-851303 90-851304 300 - 960MHz 300 - 960MHz 3 way 4 way 0.5 dB 0.4 dB 4.8dB 6dB 9W 8W 1.35:1 50W 20dB -130dBc, 2x43dBm 50 Ohm -25ºC to +75ºC IP65, RoHS compliant Passivated Aluminium or powder paint N type female Between all ports 320g 620g 800g
78
129
97
30
90-851303
117
107
78
90-851302
36 68 88
30
Ø 4.5
Ø 4.5 88
139
22
124
22
175
127
147
30
137
90-851304
30
30
127
Ø 4.5 22
137 173
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 6
Passive Equipment Catalogue LOW POWER SPLITTERS
800-2500MHz, 7/16 DIN Connectors, 2, 3 & 4 Way
Multiple-Band Frequency Range, Cellular, PCS, UMTS 50Watt Average Power 20dB Isolation, Minimum Minimal RF Insertion Loss High Reliability Environment IP65
The Cobham Wireless series of Low Power Splitters is designed to evenly split power cellular signals with minimal reflections or loss. All units are sealed to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The device can be used with antennas, leaky cable systems and wireless base stations. Part Numbers Frequency Band Split Maximum Insertion Loss Split loss Maximum VSWR Average Power Rating Minimum Isolation PIM, Passive IM Impedance Temperature Range Environment Housing Connectors DC transmission Mass
90-851012 800-2500MHz 2 way 0.3dB 3dB
90-851013 90-851014 800-2500MHz 800-2500MHz 3 way 4 way 0.5dB 0.4dB 4.8dB 6dB 1.25:1 50W 20dB -130dBc, 2x43dBm 50 Ohm -35ºC to +75ºC IP65, RoHS compliant Passivated Aluminium or powder paint 7/16 DIN type female Between all ports 320g 620g 800g
90
133 .4
90- 851013
100
60
90- 851012
120
110
56
Ø 4.5 69.5 80
82.1
120
90- 851014
24.3
36
163.4
36
60
123.4
30.5 143.4
36
150.4
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 7
Passive Equipment Catalogue LOW POWER SPLITTERS
700-2700MHz, N type Connectors, 2, 3 & 4 Way
Multiple-Band Frequency Range, Cellular, PCS, UMTS 50Watt Average Power 20dB Isolation, Minimum Minimal RF Insertion Loss High Reliability Environment IP65
The Cobham Wireless series of Low Power Splitters is designed to evenly split power cellular signals with minimal reflections or loss. All units are sealed to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The device can be used with antennas, leaky cable systems and wireless base stations. Part Numbers Frequency band Split Maximum Insertion Loss Split Loss VSWR Maximum Reflected Power Typical Isolation
90-851102 700-2700MHz 2 way 0.4dB 3dB 1.25:1 3W 20dB
90-851103 90-851104 700-2700MHz 700-2700MHz 3 way 4 way 0.6dB 0.6dB 4.8dB 6dB 1.25:1 1.30:1 3W 5W 20dB 20dB (1) Splitting 50W Combining 0.5W -130dBc, 2x43dBm 50 Ohm -35ºC to +75C IP65, RoHS compliant Passivated Aluminium or powder paint N type female between all ports 240g 420g 600g
Average Power Rating
(1)
PIM, Passive IM Impedance Temperature Range Environment Housing Connectors DC transmission Mass 20dB@800-2500MHz, 18dB@700-2700MHz
113
30
115
105
110
90-851103
119
60 99
90-851102
109
30
63
Ø 4.5
Ø 4.5 73
123
22
109
22
159
141
28 121
131
28
83
28
90-851104
Ø 4.5
93 129
22
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 8
Passive Equipment Catalogue SPLITTER/COMBINER
68-470MHz, N type Connectors, 2 Way
100Watt Average Splitting Power Minimal RF Insertion Loss High Reliability RoHS Compliant
The Cobham Wireless series of Splitter/Combiners is designed to evenly split RF signals with minimal reflections or loss. Their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole and all units are sealed to IP65 specification. Can also be used as combiners. Part Number Frequency Band Split Insertion Loss Return Loss (All Ports) Average Power Rating Minimum Isolation Impedance Temperature Range Environment Housing Connectors Mass
05-009501 68 - 470 MHz 2 way <3.4dB Input >18dB Output >20dB Splitting 100W Combining 10W >19dB 50 Ohm -20ºC to +55ºC IP65, RoHS compliant Iridite NCP N type female 650g
158.00
4 x Ø4 .5 suitable for M4 fixings
130.00
90.00
36.50
2. 00 14.00 24.00
56.50
10 1.50
203.00
138.00
14.00
150.00 178.50
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 9
Passive Equipment Catalogue SPLITTER/COMBINERS
140-470MHz, N type or 7/16DIN Connectors, 2 Way
100Watt Average Splitting Power Minimal RF Insertion Loss High Reliability RoHS Compliant N type or 7/16DIN female connectors
The Cobham Wireless series of Splitter/Combiners is designed to evenly split RF signals with minimal reflections or loss. All units are sealed to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. Can also be used as combiners. Part Numbers Frequency Band Split Typical Insertion Loss VSWR Average Power Rating Minimum Isolation Impedance Temperature Range Environment Housing Connectors Mass
65.9
2 23.0 1 93.0
166 .0 131 .0
05-005701 05-005702 140 - 470MHz 140 - 470MHz 2 way 2 way 3.5dB 3.5dB Better than 1.3:1 Splitting 100W Combining 10W >20 dB 50 Ohm -20ºC to +60ºC IP65, RoHS compliant Iridite NCP 7/16DIN female N type female 700g 700g
4 MOUNTING HOLES 15 .5 DIA .
192 .0 177 .0
35 .86
16 6.0 12 6.0
05-005701
4 MOUNTING HOLES 5.5 DIA. 201 .0
05-005702 Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 10
Passive Equipment Catalogue MULTI-BAND LOW LOSS REACTIVE POWER SPLITTERS 700-2700MHz, 7/16 DIN Connectors, 2, 3 & 4 Way
Super Wideband Band Frequency Range, Cellular, PCS, UMTS & WiFi 700Watt Average Power Low Insertion Loss High Reliability Environment IP65 7/16 DIN female connectors
The Cobham Wireless series of super wideband High Power Splitters are designed to evenly split power cellular signals with minimal reflection and loss; the design employs no resistors eliminating their contribution to PIM. All units are sealed to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The wide frequency range allows use with multiple-band antennas, leaky cable systems and wireless base stations Part Numbers Frequency Band Split Split Loss VSWR Maximum Insertion Loss Average Power Rating PIM, Passive IM Input Impedance Temperature Range Environment Connectors Housing DC transmission Mass
28
204 229.8
1510000356 1510000357 700 - 2700MHz 700 - 2700MHz 3 way 4 way 4.8dB 6dB <1.25:1 <1.35:1 0.1dB 700W; 3kW peak -150dBc, 2x43dBm 50 Ohm -35ºC to +75ºC IP65, RoHS compliant 7/16 DIN female Passivated Aluminium or powder paint Between all ports 1050g 1200g 1320g
83
1510000355
1510000355 700 - 2700MHz 2 way 3dB <1.20:1
38
2 51.8
28
2 06.8
83
1510000356
38
25 4
28
20 9
83
1510000357
38 60
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 11
Passive Equipment Catalogue MULTI-BAND LOW LOSS REACTIVE POWER SPLITTERS 700-2700MHz, N type Connectors, 2, 3 & 4 Way
Super Wideband Frequency Range, Cellular, PCS, UMTS & WiFi 500Watt Average Power Low Insertion Loss High Reliability Environment IP65
This super wideband range of Cobham Wireless High Power Splitters are designed to evenly split power cellular signals with minimal reflection and loss; the design employs no resistors eliminating their contribution to PIM. All units are sealed to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The ultra-wide frequency range allows use with multiple-band antennas and leaky cable systems and wireless base stations. 90-851602 700 - 2700 MHz 2 way 3dB 1,20:1
90-851603 90-851604 700 - 2700 MHz 700 - 2700 MHz 3 way 4 way 4.8dB 6dB 1,25:1 1.30:1 0.1dB 500W; 3kW peak -150dBc@2x43dBm 50 Ohm -35ºC to +75ºC IP65, RoHS compliant N type female Passivated Aluminium or powder paint Between all ports 380g 420g 460g
25
90-851602
195.9
60.8
Part Number Frequency Band Split Split Loss VSWR Maximum Insertion Loss Average Power Rating PIM, 3rd Order Input Impedance Temperature Range Environment Connectors Housing DC transmission Mass
25
90-851603
196.6
60.8
25
25
227
25
90-851604
196.6 227
60.8
210.4
25 42.8
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 12
Passive Equipment Catalogue DIRECTIONAL COUPLERS
120-240MHz, 6 & 10dB, N type Connectors
Low Loss Stripline Couplers 200Watt Average Main Line Power 20dB Isolation, Minimum Minimal RF Insertion Loss High Reliability Environment IP65
The Cobham Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units are sealed to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations 90-852506 90-852510 120 - 240MHz 120 - 240MHz -6dB±1.0dB -10dB±1.0dB 1.7dB 0.8dB 0.20dB 0.20dB 40W 100W 1.20:1 Maximum, All Ports 20dB 200W; 1.5kW peak 50 Ohm, nominal -25ºC to +75ºC IP65, RoHS compliant Passivated Aluminium or powder paint N type female Between mainline input and output only 430g 430g
50
68
Part Numbers Frequency Band Coupling Maximum Mainline Loss Maximum Insertion Loss Maximum Reflected Power VSWR Minimum Isolation Average Power Rating Impedance Temperature Range Environment Housing Connectors DC transmission Mass
120 156
23
90-852506 & 90-852510
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 13
Passive Equipment Catalogue DIRECTIONAL COUPLERS
300-500MHz, 6 to 30dB, N type Connectors
Low Loss Stripline Couplers 200Watt Average Main Line Power 20dB Isolation, Minimum Minimal RF Insertion Loss High Reliability Environment IP65
The Cobham Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units are sealed to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number 90-852306 Frequency Band 300 - 500MHz Coupling -6dB ±1.0dB Maximum Mainline Loss 1.7dB Maximum Insertion Loss 0.20dB Maximum Reflected Power 40W VSWR Minimum Isolation Average Power Rating Impedance Temperature Range Environment Housing Connectors DC transmission Mass 440g
90-852310 90-852315 90-852320 300 - 500MHz 300 - 500MHz 300 - 500MHz -10dB ±1.0dB -15dB ±1.0dB -20dB ±1.0dB 0.8dB 0.4dB 0.22dB 0.20dB 0.20dB 0.20dB 100W 200W 200W 1.20:1 Maximum, All Ports 20dB 200W; 1.5kW peak 50 Ohm, nominal -25ºC to +75ºC IP65, RoHS compliant Passivated Aluminium or powder paint N type female Between mainline input and output only 440g 440g 440g
90-852330 300 - 500MHz -30dB ±1.0dB 0.20dB 0.20dB 200W
440g
54.8
37
Ø4.5
142 25
177.6 90-8523xx, typical outline
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 14
Passive Equipment Catalogue DIRECTIONAL COUPLERS
300-960MHz, 6 to 30dB, N type Connectors
Low Loss Stripline Couplers 200Watt Average Main Line Power Low Passive Intermodulation (PIM) Minimal RF Insertion Loss High Reliability Environment IP65
The Cobham Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units are sealed to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number 90-852406 Frequency Band 300 - 960MHz Coupling -6dB ±1.0dB Maximum Mainline Loss 1.7dB Maximum Insertion Loss 0.25dB Maximum Reflected Power 40W VSWR Minimum Isolation Average Power Rating Impedance PIM, Passive IM Temperature Range Environment Housing Connectors DC transmission Mass 400g
90-852410 90-852415 90-852420 300 - 960MHz 300 - 960MHz 300 - 960MHz -10dB ±1.0dB -15dB ±1.0dB -20dB ±1.0dB 0.8dB 0.6dB 0.5dB 0.25dB 0.20dB 0.20dB 100W 200W 200W 1.20:1 Maximum, All Ports 20dB 200W; 1.5kW peak 50 Ohm, nominal -140dBc, 2 x 43dBm -25ºC to +75ºC IP65, RoHS compliant Passivated Aluminium or powder paint N type female Between mainline input and output only 400g 400g 400g
90-852430 300 - 960MHz -30dB ±1.0dB 0.4dB 0.20dB 200W
440g
186 2 x Ø 3.5
31
26
90-852406 /10/15/20
49
4 x Ø3.5
110 176 212
23
186 2 x Ø3 .5
35
30
90-852430
53
4 x Ø3.5
110 176 212
23
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 15
Passive Equipment Catalogue DIRECTIONAL COUPLERS
700-2700MHz, 5 to 30dB, N type Connectors
Low Loss Stripline Couplers Multiple-Band Frequency Range, Cellular, PCS, UMTS 200Watt Average Main Line Power 20dB Directivity, Minimum Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65
Frequency Band -5dB
Coupling Maximum Mainline Loss Maximum Insertion Loss Maximum Reflected Power Maximum VSWR Directivity (minimum) Average Power Rating PIM, Passive IM Impedance Temperature Range Environment Housing Connectors DC transmission Mass
2.3dB 30W
-6dB -7dB ±0.8dB 1.7dB 1.5dB 0.25dB 40W 50W
700 - 2700MHz -8dB -10dB -13dB 1.2dB
0.8dB
0.5dB
90-852230
90-852220
90-852215
90-852213
90-852210
90-852208
90-852207
Part Numbers
90-852206
90-852205
The Cobham Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units are sealed to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations.
-15dB -20dB ±1.0dB 0.4dB 0.22dB 0.20dB 200W
70W 100W 1.25:1, All Ports 20dB 200W; 1.5kW peak -140dBc, 2x43dBm 50 Ohm, nominal -25ºC to +75ºC IP65, RoHS compliant Passivated Aluminium or powder paint N type female Between mainline input and output only 300g
-30dB 0.20dB
35dB
340g
115
37 54.8
Ø 4.6
115
105 140.6
23
Ø 4.6
41
58.8
5 - 20dB typical outline
105 140.6
23
30dB typical outline Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 16
Passive Equipment Catalogue DIRECTIONAL COUPLERS
700-2700MHz, 5 to 30dB, 7/16 DIN type Connectors
Low Loss Stripline Couplers Multiple-Band Frequency Range, Cellular, PCS, UMTS 200Watt Average Main Line Power 20dB Directivity, Minimum Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65
Frequency Band Coupling Maximum Mainline Loss Maximum Insertion Loss Maximum Reflected Power Maximum VSWR Directivity (minimum) Average Power Rating PIM, Passive IM Impedance Temperature Range Environment Housing Connectors DC transmission Mass
-5dB 2.3dB 30W
-6dB -7dB ±0.8dB 1.7dB 1.5dB 0.25dB 40W 50W
700 - 2700MHz -8dB -10dB -13dB 1.2dB
0.8dB
0.5dB
-15dB -20dB ±1.0dB 0.4dB 0.22dB 0.20dB 200W
1510000191
1510000190
1510000189
1510000188
1510000187
1510000186
1510000185
1510000184
Part Numbers
1510000183
The Cobham Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units are sealed to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The ultra-wide frequency range allows use with multi-band antennas and leaky cable systems and wireless base stations.
-30dB 0.20dB
70W 100W 1.25:1, All Ports 20dB 200W; 1.5kW peak -140dBc, 2x43dBm 50 Ohm, nominal -25ºC to +75ºC IP65, RoHS compliant Passivated Aluminium or powder paint 7/16DIN female Between mainline input and output only 750g
35dB
800g
44
35.6
6 5.7
Ø 5.5
112 155.4
36
5 - 20dB typical outline
30dB typical outline
48
39.6
69.7
Ø 5.5
112 155.4
36
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 17
Passive Equipment Catalogue DIRECTIONAL COUPLERS
380-2700MHz, 6, 10, 15, 20 & 30dB Tap
Low Loss Stripline Couplers 200Watt Average Main Line Power Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65
Frequency Band Coupling
-6dB
Maximum Insertion Loss 1.8dB Isolation Maximum Reflected Power 40W Maximum VSWR Average Power Rating PIM, Passive IM Impedance Temperature Range Environment Housing Connectors DC transmission Mass
380 - 2700MHz -30dB -6dB -10dB -15dB -20dB ±1.5 ±1.0 0.3dB 0.2dB 1.8dB 0.9dB 0.4dB 0.3dB 30dB 20dB 200W 200W 40W 100W 200W 200W 1.3:1, All Ports 200W - 1.5KW peak -140dBc, 2x43dBm 50 Ohm, nominal -25ºC to +75ºC IP65, RoHS compliant Passivated Aluminium or powder paint N type female 7/16 DIN female Between mainline input and output only 390g 890g
-10dB -15dB ±1.0 0.9dB 0.4dB 20dB 100W 200W
-20dB
90-852930
90-852920
90-852915
90-852910
90-852906
90-852730
90-852720
90-852715
90-852710
Part Numbers
90-852706
This series of Directional Couplers is a stripline design for indoor/outdoor applications covering all the wireless services from 380 to 2700MHz. Units couple off a defined fraction of signal with minimal reflections or loss. All units are sealed to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The ultra-wide frequency range allows use with multi-band antennas and leaky cable systems and wireless base stations.
-30dB ±1.5 0.2dB 30dB 200W
154
54 .8
Ø 4.6
37
Typical outline, 90-8527xx
144
23
180
Typical outline, 90-8529xx 194
66
35.6
Ø5.5
36
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 18
Passive Equipment Catalogue DIRECTIONAL COUPLERS 140/470MHz, 6 & 10dB Tap
Low Loss Stripline Couplers 100Watt Average Main Line Power Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65
The Cobham Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units are sealed to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Numbers Frequency Band Coupling Maximum Insertion Loss Maximum Power Rating VSWR Average Power Rating Impedance Connectors Temperature Range Environmental Mechanical Finish MTBF Mass
07-010401 07-010402 140 – 470MHz 140 – 470MHz 6dB±1.0dB 10dB±1.0dB 1.6dB 0.8dB 100W 100W Better than 1.3:1 100W 50 Ohms 7/16 DIN Female -20°C to +55°C IP65 Wall mount Iridite NCP >180000 hours 1500g 1500g
Typical outline, 6dB and 10dB versions Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 19
Passive Equipment Catalogue DIRECTIONAL COUPLERS
140/470MHz, 10 & 30dB Tap
Low Loss Stripline Couplers 100Watt Average Main Line Power Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65
The Cobham Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units are sealed to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations.
Part Numbers Frequency Band Coupling Typical Insertion Loss VSWR Average Power Rating Impedance Connectors Temperature Range Environmental Mechanical Finish MTBF Mass
07-010902 140 - 470MHz 10dB±0.5dB 0.7dB
07-010905 140 - 470MHz 30dB±0.5dB 0.3dB
1.3:1 100W 50 Ohms N type female -20 to +60°C IP65 Wall mount Iridite NCP >180000 hours 800g
800g
246.0 222.0
42.5
64.5
87.5
210.0
25.5
Ø3 .4 HOLES IN 4 POSITIONS SUITABLE FOR M3 FIXINGS
Typical outline, 10dB and 30dB versions Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 20
Passive Equipment Catalogue DIRECTIONAL COUPLERS
150/2200MHz, 6, 10, 15, 20 & 30dB Tap
Low Loss Stripline Couplers 100Watt Average Main Line Power Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65
The Cobham Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units are sealed to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations.
Part Numbers 07-014002 Frequency Band Coupling 6dB +2dB/-1dB Typical Insertion Loss ≤ 2.1dB VSWR 1.3:1 Average Power Rating 100W Impedance Connectors Temperature Range Environmental Mechanical Finish MTBF Mass 800g
07-014001
07-014003
07-014004
07-014006
10dB ± 2.5dB ≤ 0.9 dB 1.3:1 100W
15dB ± 1.5dB ≤ 0.6dB 1.3:1 100W 50 Ohms N type female -20°C to +55°C IP65 Wall mount Iridite NCP >180000 hours 800g
20dB ±2.0dB ≤ 0.4dB 1.3:1 100W
30dB ±1.0dB ≤ 0.3dB 1.3:1 100W
800g
800g
800g
27.00
35.00
57.00
3.40 THROUGH MOUNTING HOLES IN 4 PLACES
INPUT
OUTPUT
COUPLED PORT
246.00 254.00
24.00
278.00
Typical outline, 10dB and 30dB versions Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 21
Passive Equipment Catalogue 3 dB HYBRID COUPLER/COMBINER
120-240MHz, N type Connectors, 30dB Minimum Isolation
200Watt Average Main Line Power 30dB Isolation, Minimum Minimal RF Insertion Loss High Reliability Environment IP65
The Cobham Wireless series of 3dB Hybrid Couplers is designed to meet the specialized requirements of the wireless market. It can combine two channels from different service suppliers to a single antenna or distribution cable; this requires the termination of one output port with a 50 Ohm load and results in a 3dB loss in each signal. In situations where two similar feeds are required, for example an in-building application, both outputs may be used, eliminating the need for a termination and the 3dB loss. All units are sealed to IP65 specification. These devices are suitable for use with antennas and leaky cable systems and wireless base stations.
Part Number Frequency Range Minimum Input Isolation Maximum Insertion Loss Average Power Rating VSWR Coupling Coupling Variation Impedance Temperature Range Environment Housing Connectors DC transmission Mass
90-853006 120 – 240MHz 30dB 0.2dB 200W 1.20:1 Maximum All Ports 3dB, nominal ±0.5dB 50 Ohm, nominal -25ºC to +75ºC IP65, RoHS compliant Passivated Aluminium or powder paint N type female Between cross ports only 700g
145
87
51
4.5
25
114 153 J1 Input
J4 Output
J2 Input
J3 Output
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 22
Passive Equipment Catalogue 3 dB HYBRID COUPLER/COMBINER
300-500MHz, N type Connectors, 35dB Minimum Isolation
200Watt Average Main Line Power 35dB Isolation, Minimum Minimal RF Insertion Loss High Reliability Environment IP65
The Cobham Wireless series of 3dB Hybrid Couplers is designed to meet the specialized requirements of the wireless market. It can combine two channels from different service suppliers to a single antenna or distribution cable; this requires the termination of one output port with a 50 Ohm load and results in a 3dB loss in each signal. In situations where two similar feeds are required, for example an in-building application, both outputs may be used, eliminating the need for a termination and the 3dB loss. All units are sealed to IP65 specification. These devices are suitable for use with antennas and leaky cable systems and wireless base stations.
Part Number Frequency Range Minimum Input Isolation Maximum Insertion Loss Average Power Rating VSWR Coupling Coupling Variation Impedance Temperature Range Environment Housing Connectors DC transmission Mass
90-853004 300 - 500MHz 35dB 0.2dB 200W 1.20:1 Maximum All Ports 3dB, nominal ±0.4dB 50 Ohm, nominal -25ºC to +75ºC IP65, RoHS compliant Passivated Aluminium or powder paint N type female Between cross ports only 480g
140
70.6
35
Ø 4.5
25
114 148 J1 Input
J4 Output
J2 Input
J3 Output
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 23
Passive Equipment Catalogue 3 dB HYBRID COUPLER/COMBINER
300-960MHz, N type Connectors, 23dB Minimum Isolation
120Watt Average Main Line Power 23dB Isolation, Minimum Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65
The Cobham Wireless series of 3dB Hybrid Couplers is designed to meet the specialized requirements of the wireless market. It can combine two channels from different service suppliers to a single antenna or distribution cable; this requires the termination of one output port with a 50 Ohm load and results in a 3dB loss in each signal. In situations where two similar feeds are required, for example an in-building application, both outputs may be used, eliminating the need for a termination and the 3dB loss. All units are sealed to IP65 specification. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency Range Minimum Input Isolation Maximum Insertion Loss Average Power Rating VSWR Coupling Frequency Sensitivity PIM, Passive IM Impedance Temperature Range Environment Housing Connectors VSWR DC transmission Mass
90-853005 300 – 960MHz 23dB 0.2dB 120W 1.2:1 Maximum All Ports 3.1dB, ±0.2dB ±0.3dB -140dBc, 2x43dBm 50 Ohm, nominal -25ºC to +75ºC IP65, RoHS compliant Passivated Aluminium or powder paint N type female 1.2:1 Maximum All Ports Between cross ports only 610g
195
76
40
Ø 4.5
25
160 203 J1 Input
J2 Input
J4 Output
J3 Output
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 24
Passive Equipment Catalogue 3 dB HYBRID COUPLER/COMBINERS
800-960MHz, N type or 7/16 DIN Connectors, 35dB Minimum Isolation
200Watt Average Main Line Power 35dB Isolation, Minimum Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65
The Cobham Wireless series of 3dB Hybrid Couplers is designed to meet the specialized requirements of the wireless market. It can combine two channels from different service suppliers to a single antenna or distribution cable; this requires the termination of one output port with a 50 Ohm load and results in a 3dB loss in each signal. In situations where two similar feeds are required, for example an in-building application, both outputs may be used, eliminating the need for a termination and the 3dB loss. All units are sealed to IP65 specification. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Numbers Frequency Range Minimum Input Isolation Maximum Insertion Loss Average Power Rating VSWR Coupling Coupling Variation PIM, Passive IM Impedance Temperature Range Environment Housing Connectors DC transmission Mass
90-853007 90-853017 800 – 960MHz 800 – 960MHz 35dB 35dB 0.2dB 0.2dB 200W 200W 1.20:1 Maximum All Ports 3dB, nominal ±0.3dB -140dBc, 2x43dBm 50 Ohm, nominal -25ºC to +75ºC IP65, RoHS compliant Passivated Aluminium or powder paint N type female 7/16 DIN female Between cross ports only 230g 640g
90-853007
90-853017
Ø4
76
80.4
37
Ø 4
30 66
76
24
55 88
55
37
95 J1 Input
J4 Output
J2 Input
J3 Output
J1 Input
J4 Output
J2 Input
J3 Output
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 25
Passive Equipment Catalogue MULTI-BAND HYBRID COUPLER/COMBINER
700-2700MHz, N type Connectors, 22dB Minimum Isolation
Multiple-Band Frequency Range 120Watt Average Power Rating 22dB Isolation, Minimum Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65
The Cobham Wireless series of Multi-band Hybrid Coupler/Combiners is designed to meet the specialized requirements of the wireless market. They can combine two channels from different service suppliers to a single antenna or distribution cable; this requires the termination of one output port with a 50 Ohm load and results in a 3dB loss in each signal. In situations where two similar feeds are required, for example an in-building application, both outputs may be used, eliminating the need for a termination and the 3dB loss. All units are sealed to IP65 specification. The ultra-wide frequency range allows use with multi-band antennas, leaky cable systems and wireless base stations. Part Number 90-853002 Frequency Range 700 – 2700MHz Minimum Input Isolation 22dB Maximum Insertion Loss 0.25dB Average Power Rating 120W VSWR 1.20:1 Maximum All Ports Coupling 3.1±0.6dB PIM, Passive IM -140dBc, 2x43dBm Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or powder paint Connectors N type female DC transmission Between cross ports only Mass 420g
40
125
84
76
Ø4
25
133 J1 Input
J4 Output
J2 Input
J3 Output
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 26
Passive Equipment Catalogue MULTI-BAND HYBRID COUPLER/COMBINERS
1710-2200MHz, N or 7/16 DIN Connectors, 30dB Minimum Isolation
200Watt Average Power Rating 30dB Isolation, Minimum Minimal RF Insertion Loss High Reliability Indoor Application
These Cobham Wireless Multi-band Hybrid Coupler/Combiners are designed to meet the special requirement of the wireless market. They can combine two channels from different service suppliers to a single antenna or distribution cable; this requires the termination of one output port in the 50 ohm and results in a 3dB loss in each signal. In situations where two similar feeds are required, for example an in-building application, both outputs may be used thus eliminating the need for a termination and the 3dB loss. Part Number Frequency Range Minimum Input Isolation Maximum Insertion Loss Average Power Rating VSWR Coupling Coupling Variation Impedance Temperature Range Environment Housing Connectors DC transmission Mass
90-853003 90-853013 1710 - 2200MHz 1710 - 2200MHz 30dB 30dB 0.2dB 0.2dB 200W 200W 1.15:1 Maximum All Ports 3.1dB, nominal ±0.3dB 50 Ohm, nominal -25ºC to +75ºC Indoor Application Passivated Aluminium or powder paint N type female 7/16 DIN female Between cross ports only 300g 790g
90-853003
90-853013
51 87
Ø5
76 51
101 .4
Ø5 58
76
20
88 51 92 J1 Input
J4 Output
J2 Input
J3 Output
J1 Input
J4 Output
16.5 37 J2 Input
J3 Output
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 27
Passive Equipment Catalogue CROSSBAND COUPLERS/DIPLEXERS
500/800MHz, N or 7/16 DIN Connectors, 50dB Minimum Isolation
High isolation Low insertion loss Good VSWR Low intermodulation Sealed to IP65 as standard
The Cobham Wireless range of Diplexers and Crossband Couplers offers a compact solution to allow the co-siting of two different frequency bands on to one common output. Designed using high performance filters, either bandpass or highpass/lowpass, these units provide excellent inter-band isolation, low insertion loss and good intermodulation performance. By using crossband couplers it is possible to reduce feeder cable requirement by 50%, thereby reducing rigging and tower rental costs in applicable situations. Suitable for use in Transmitter/Dual Band Networks, In-building and Common Antenna Sharing Systems. Part Number Frequency Range Minimum Isolation Maximum Insertion Loss Power Rating Impedance VSWR Temperature Range Environment Input ports Output ports MTBF Connectors Housing Approx mass
07-004802 07-005302 0-500MHz 0-500MHz 800-2200MHz 800-2200MHz > 35dB 0-500MHz > 50dB 0-500MHz > 40dB 800-2170MHz > 50dB 800-2170MHz 0.5dB 0.5dB 100W CW 100W CW 50 Ohm, nominal 1.3:1 800-960 MHz 1.4:1 1710-2170 MHz -25ºC to +75ºC IP65, RoHS compliant 2 1 typically >180,000 hours N type female 7/16 DIN female Aluminum finished to RAL7035 580g 750g
07-004802 144 .0
07-005302 103 .0
40.8
130 .0
96.0
120 .0 30.80
103 .0
COMBINED
>800 MHz
COMBINED
>800 MHz
4.19
4.48
4.18
4.19
<500 MHz
<500 MHz
96.0
96.0 M4.5 FI XING HOL ES IN 4 PLACES
THESE F IXINGS REPEAT ED ON OPPOSIT E FACE
M3 x 8 FI XING HOL ES IN 8 PLACES
M3 x 8 FI XING HOL ES IN 8 PLACES
4.02
4.51 96.0 THESE F IXINGS REPEAT ED ON OPPOSIT E FACE
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 28
Passive Equipment Catalogue CROSSBAND COUPLER/DIPLEXER
490/650MHz, N Connectors, 40dB Minimum Isolation
High isolation Low insertion loss Good VSWR Low intermodulation Sealed to IP65 as standard
The Cobham Wireless range of Diplexers and Crossband Couplers offers a compact solution to allow the co-siting of two different frequency bands on to one common output. Designed using high performance filters, either bandpass or highpass/lowpass, these units provide excellent inter-band isolation, low insertion loss and good intermodulation performance. By using crossband couplers it is possible to reduce feeder cable requirement by 50%, thereby reducing rigging and tower rental costs in applicable situations. Suitable for use in Transmitter/Dual Band Networks, In-building and Common Antenna Sharing Systems. Part Number 07-019301 50-490MHz Frequency Range 650-2200MHz > 40 dB 50-490 MHz Minimum Isolation > 40 dB 800-2200 MHz Maximum Insertion Loss 0.5 dB (On edge of Passband) Power Rating 100W CW Impedance 50 Ohm, nominal 1.5:1 50-200 MHz VSWR 1.3:1 200-490 MHz & 650-960 MHz 1.5:1 1700-2200 MHz Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Connectors N type female Housing Aluminum finished to RAL7035 Approx mass 500g 125.6 88.0
LOW
0 . 38
HIG H
ANT
85.5
0. 61
2.5
2 x MOUNTING HO LES M3.5 x 0.5 - 6H - 8.00 DEEP
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 29
Passive Equipment Catalogue CROSSBAND COUPLER/DIPLEXER
108/143MHz, N Connectors, Isolation >30dB
High isolation Low insertion loss Good VSWR Low intermodulation Sealed to IP65 as standard
The Cobham Wireless range of Diplexers and Crossband Couplers offers a compact solution to allow the co-siting of two different frequency bands on to one common output. Designed using high performance filters, either bandpass or highpass/lowpass, these units provide excellent inter-band isolation, low insertion loss and good intermodulation performance. By using crossband couplers it is possible to reduce feeder cable requirement by 50%, thereby reducing rigging and tower rental costs in applicable situations. Suitable for use in Transmitter/Dual Band Networks, In-building and Common Antenna Sharing Systems. Part Number 07-005716 0 - 108MHz Frequency Range 143 - 500MHz Minimum Isolation >30dB Maximum Insertion Loss 0.5dB Power Rating 100W CW Impedance 50 Ohm, nominal VSWR 1.3:1 Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Connectors N type female Housing Aluminium finished to RAL7035 Approx mass 600g
87.0
80.0
39.3
112.0
105.0
108MHz
143MHz
105.0
125.0
132.0
108/143MHz
80.0
4 MOUNTING HOLES 4.50 DIA 19.3
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 30
Passive Equipment Catalogue CROSSBAND COUPLER/DIPLEXER
250/380MHz, N Connectors, Isolation >30dB
High isolation Low insertion loss Good VSWR Low intermodulation Sealed to IP65 as standard
The Cobham Wireless range of Diplexers and Crossband Couplers offers a compact solution to allow the co-siting of two different frequency bands on to one common output. Designed using high performance filters, either bandpass or highpass/lowpass, these units provide excellent inter-band isolation, low insertion loss and good intermodulation performance. By using crossband couplers it is possible to reduce feeder cable requirement by 50%, thereby reducing rigging and tower rental costs in applicable situations. Suitable for use in Transmitter/Dual Band Networks, In-building and Common Antenna Sharing Systems. Part Number 07-005736 0 - 250MHz Frequency Range 380 - 500MHz Minimum Isolation >50dB Maximum Insertion Loss 0.5dB Power Rating 100W CW Impedance 50 Ohm, nominal VSWR 1.3:1 Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Connectors N type female Housing Aluminium finished to RAL7035 Approx mass 600g
87.0
80.0
39.3
112.0
105.0
250MHz
380MHz
105.0
125.0
132.0
250/380MHz
80.0
4 MOUNTING HOLES 4.50 DIA 19.3
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 31
Passive Equipment Catalogue CROSSBAND COUPLER/DIPLEXER
1000/1700MHz, N type Connectors, Isolation >50dB
High isolation Low insertion loss Good VSWR Low intermodulation Sealed to IP65 as standard
The Cobham Wireless range of Diplexers and Crossband Couplers offers a compact solution to allow the co-siting of two different frequency bands on to one common output. Designed using high performance filters, either bandpass or highpass/lowpass, these units provide excellent inter-band isolation, low insertion loss and good intermodulation performance. By using crossband couplers it is possible to reduce feeder cable requirement by 50%, thereby reducing rigging and tower rental costs in applicable situations. Suitable for use in Transmitter/Dual Band Networks, In-building and Common Antenna Sharing Systems. Part Number 07-004302 0-1000MHz Frequency Range 1700-2200MHz Minimum Isolation >50dB <0.3dB 0 - 1000MHz Maximum Insertion Loss <0.5dB 1700-2200 MHz Power Rating 200W CW Impedance 50 Ohm, nominal VSWR 1.3:1 Temperature Range -20 to +55°C Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Connectors N type female Housing Aluminium finished to RAL7035 Approx mass 600g 118.0 30.8
108.0
COMBINED
103.0
100.0
110.0
PCN/PCS
GSM
84.0 4 OFF FIXINGS 4.5 DIA. THESE FIXINGS REPEATED ON OPPOSITE FACE
M3 x 8 FIXINGS IN 8 POSITIONS
84.0 132.0
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 32
Passive Equipment Catalogue CROSSBAND COUPLER/DIPLEXER
1000/1710MHz, 7/16DIN Connectors, Isolation >47dB
High isolation Low insertion loss Good VSWR Low intermodulation Sealed to IP65 as standard
The Cobham Wireless range of Diplexers and Crossband Couplers offers a compact solution to allow the co-siting of two different frequency bands on to one common output. Designed using high performance filters, either bandpass or highpass/lowpass, these units provide excellent inter-band isolation, low insertion loss and good intermodulation performance. By using crossband couplers it is possible to reduce feeder cable requirement by 50%, thereby reducing rigging and tower rental costs in applicable situations. Suitable for use in Transmitter/Dual Band Networks, In-building and Common Antenna Sharing Systems. Part Number 80-030407 800 – 1000MHz Frequency Range 1710 – 2170MHz Minimum Isolation >47dB <0.3dB - GSM 900 Typical: 0.15dB Insertion Loss <0.3dB - GSM 1800 Typical: 0.25dB <0.5dB - UMTS Typical: 0.4dB 200W CW (Low Pass) Power Rating 100W CW (High Pass) Impedance 50 Ohm, nominal VSWR 1.23:1 Temperature Range -20 to +60°C Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Connectors 7/16 DIN female Housing Aluminium finished to RAL7035 Approx mass 800g 122. 0 41.0
110. 0
COMBINED
103. 0
98.0
110.0
800 – 1000MHz
1710 – 2170MHz
84. 0 M 3 x 8 FIXINGS IN 8 POSITIONS
20. 4
4 OFF FIXINGS 7.0 DIA
THESE FIXINGS REPEATED ON OPPOSITE FACE
84.0 135. 0
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 33
Passive Equipment Catalogue MULTI-BAND LOW LOSS POWER TAPS, 700-2700MHz Unequal Power Splitters, N type Connectors
Multiple-Band Frequency Range, Cellular, PCS, UMTS & WiFi 200Watt Average Power Rating Minimal RF Insertion Loss High Reliability Low Passive Intermodulation (PIM) Environment IP65
90-854140
90-854120
-0.5dB
90-854115
-1.26dB
700 - 2700MHz -15dB -20dB ±1dB
-30dB ±1.5dB
-40dB
-0.2dB
-0.1dB
1.35:1
1.15:1 200W, avg. 1.5kW peak -150dBc, 2x43dBm 50 Ohm, nominal -25ºC to +75ºC IP65, RoHS compliant Passivated Aluminium or powder paint N type female Between input and port P1 only (P2 is coupled capacitively) 370g 180g
-6dB ±0.8dB @ 800 - 2500MHz -10dB ±1.0dB @ 800 - 2500MHz
Input
46.3
46.3
P2
Input
P1
25
P1
62.6
P2
25
(2)
-10dB ±1.2dB(2)
62.6
(1)
-6dB ±1.2dB(1)
90-854130
Frequency Range Tap Loss Input←→P2 Tap Loss Input←→P1 Maximum VSWR Power Rating PIM, Passive IM Impedance Temperature Range Environment Housing Connectors DC transmission Mass
90-854110
Part Numbers
90-854106
The Cobham Wireless series of power taps is used to unevenly split high power cellular signals from 5dB to 40dB. This design is optimized to produce minimal reflections or loss and to minimize PIM and increase reliability over the whole 700-2700MHz band. All units are sealed to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The ultra-wide frequency range allows use with multi-band antennas, leaky cable systems and wireless base stations.
173 .4 209
25
5dB to 15dB outline
57 92.6
25
20dB to 40dB outline
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 34
Passive Equipment Catalogue LOW & MEDIUM POWER LOAD TERMINATIONS DC-3000MHz, 50 Ohms
Resistive Film Load Finned Termination Ideal for Wireless Communication Powers 2W to 50W Maximum VSWR 1.15:1 High Reliability
90-855302
90-855501
90-855502
90-855301
90-855202
20W 30W 54 82 35 40 210g 330g F M 50 Ohm, nominal DC - 3GHz 1.15:1 2 kW -35ºC to +125ºC Anodised Aluminium
50W 136 50 390g F
90-855504
20W 54 35 210g M
50W 137 50 390g M
90-855503
10W 53 35 190g F
30W 136 40 270g F
90-855304
10W 40 35 190g M
20W 20W 30W 82 82 137 35 35 40 160g 160g 270g M F M 50 Ohm, nominal DC - 3GHz 1.15:1 2 kW -35ºC to +125ºC Anodised Aluminium
90-855303
10W 54 35 130g F
90-855201
90-855102
10W 54 35 130g M
90-855204
90-855101
5W 53 20 55g M
90-855203
Power Rating Length (mm) Cross Section (mm) Mass Connector, 7/16 DIN Impedance Frequency Range Maximum VSWR Peak power Temperature Range Housing
2W 40 20 52g M
90-855104
Part Number
90-855051
Power Rating Length (mm) Cross Section (mm) Mass Connector, N type Impedance Frequency Range Maximum VSWR Peak power Temperature Range Housing
90-855103
Part Number
90-855021
The Cobham Wireless 90-855xxx series of 50 Ohm terminations are low and medium power coaxial loads, which operate from DC to 3GHz. Cooling fins minimize temperature rise of the resistive film terminating element, contained within a carefully matched housing. Standard connectors are N Type and 7/16 DIN, male or female.
30W 82 40 330g F
50W 137 50 450g M
50W 136 50 450g F
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 35
Passive Equipment Catalogue HIGH POWER LOAD TERMINATIONS DC-3000MHz, 50 Ohms, 100Watt
Resistive Film Load Finned Termination Ideal for Wireless Communication 100W Maximum VSWR 1.25:1 High Reliability
The 90-856xxx series of 50 Ohm terminations are high power coaxial loads, which operate from DC to 3GHz. Cooling fins minimize temperature rise of the resistive film terminating element, contained within a carefully matched housing. Standard connectors are N Type and 7/16 DIN, male or female.
Part Numbers Power Rating Length (mm) Cross Section (mm) Mass Connector Impedance Frequency Range Maximum VSWR Peak power Temperature Range Housing
90-856001 100W 188 110 x 110 1780g N type Male
90-856002 90-856003 100W 100W 167 197 110 x 110 110 x 110 1780g 1860g N type female 7/16 DIN Male 50 Ohm, nominal DC - 3GHz 1.25:1 2kW -35ºC to +125ºC Anodised Aluminium
167
188
100
100
167
90-856004 100W 189 110 x 110 1860g 7/16 DIN Female
197
110
90-856001
110
90-856003
185
100
167
100
167
110
189
90-856002
110
90-856004
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 36
Passive Equipment Catalogue COAXIAL FIXED ATTENUATORS DC-2700MHz, 50 Ohms
Ideal for Wireless Applications Power 10W to 50W VSWR to 1.25:1 Maximum 100W High Reliability Indoor Application
Part Number
Attenuation all values ±1dB
Power Rating
Peak Power
Frequency Range
Nominal Impedance
Maximum VSWR
Temperature Range
Housing
Mass
90-857103 90-857105 90-857106 90-857110 90-857115 90-857120 90-857130
3dB 5dB 6dB 10dB 15dB 20dB 30dB
10W
1kW
DC - 2.7GHz
50 Ohm
1.25:1
-35ºC to +85ºC
Anodised Aluminium
290g
90-857203 90-857205 90-857206 90-857210 90-857215 90-857220 90-857230
3dB 5dB 6dB 10dB 15dB 20dB 30dB
25W
1kW
DC - 2.7GHz
50 Ohm
1.25:1
-35ºC to +85ºC
Anodised Aluminium
520g
90-857503 90-857505 90-857506 90-857510 90-857515 90-857520 90-857530
3dB 5dB 6dB 10dB 15dB 20dB 30dB
50W
1kW
DC - 2.7GHz
50 Ohm
1.25:1
-35ºC to +85ºC
Anodised Aluminium
The Cobham Wireless 90-857xxx series devices are medium power coaxial fixed attenuators, which operate from DC to 2.7GHz. Cooling fins minimize temperature rise of the resistive film network element which is contained within a carefully matched housing. Standard connectors are N, male to N, female.
1200g
100 90
55
Ø 4.5
80
45 89.5
55
90
80
90 134.5
125 169 .5
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 37
Passive Equipment Catalogue
ABOUT COBHAM WIRELESS Delivering state-of-the-art wireless and connectivity solutions that give our customers a competitive edge. We are global leaders in the provision of advanced wireless coverage and mobile communications systems, producing innovative, cost-effective solutions that address market requirements for improved connectivity, greater capacity and better quality of experience. Our intelligent digital Distributed Antenna Systems (DAS), along with our advanced nework validation tools for mobile and IP networks, will help propel your network to the next generation. www.cobham.com/wireless
Cobham Wireless Offices in: Australia • Austria • Canada • China • France • Germany Israel • Italy • Russia • Singapore • Sweden • UAE • UK • USA
Cobham Wireless Passive Equipment Catalogue Issue 17 : September 2015 © Cobham Wireless
www.cobham.com/wireless
Page 38