The Colostrum Management System
Service manual
www.coloquick.com
www.coloquick.com
Tlf. +45 97537333
Index: 2 3 4 6 10 14 15 16 17 18 19 20 21 22 23
Service Type specifications Troubleshooting - coloQuick thawing unit Troubleshooting - Pasteur Troubleshooting - Pasteur Maxx 4 Diagram - coloQuick Pasteur Max 3x208 -240 Vac Diagram - coloQuick Pasteur Max 3x400 Vac Wiring Diagram - coloQuick Pasteur2 208 - 240 Vac wiring Diagram - coloQuick Pasteur2 230 Vac wiring Diagram - coloQuick Pasteur2 3X230 Vac wiring Diagram - coloQuick Pasteur2 3X400 Vac Diagram - coloQuick Thaw 3X230 Vac Wiring Diagram - coloQuick Thaw 3X230 Vac Wiring Diagram - coloQuick Thaw 208 - 230 Vac Filling station
When contacting Calvex please have the following data available. You will find the information on the data plate of the machine.
Type: ________________________________________________________________________________________________________________________________________ Year of production: ______________________________________________________________________________________________________________ Machine serial number: ______________________________________________________________________________________________________ Calvex A/S, Holstebrovej 104, 7800 Skive, Danmark 路 phone +45 9753 7333
Please note that pictorial materials are only instructive. It will not necessarily reflect the precise specifications and details of the model in question.
2
www.coloquick.com
Type specifications
Model:
coloQuick thawing unit
Pasteur
Pasteur Maxx 4
Colostrum heater
Pasteuriser and colostrum heater
Pasteuriser and colostrum heater
1 x 230Vac (EU) 3 x 400Vac (EU) 3 x 230Vac (EU) 1 x 208 - 240Vac (US)
1 x 230Vac (EU) 3 x 400Vac (EU) 3 x 230Vac (EU) 1 x 208 - 240Vac (US)
3 x 400Vac (EU) 3 x 230Vac (EU) 3 x 208 - 240Vac (US)
4,9 - 6,5kW
4,9 - 6,5kW
10 - 13kW
85
85
150
Consumption (kWh):
1.80 (thawing)
2,33 (pasteurisation) 2,35 (thawing)
4,43 (pasteurisation) 2,45 (thawing)
Dimensions, LxWxH:
686 x 515 x 732 mm
708 x 525 x 735 mm
770 x 710 x 1070 mm
Green cartridge Dimensions, LxWxH:
417 x 378 x 62 mm
417 x 378 x 62 mm
417 x 378 x 62 mm
Weight water bath (kos):
60
68
95
Weight filling station (kos):
8,9
8,9
8,9
Type:
Connection:
Power: Water contents (litres):
3
www.coloquick.com
www.coloquick.com
3
Troubleshooting
coloQuick thawing unit
Problem
What is happening
Solution
Machine is not running.
No light in the display.
Turn main switch into position ”1”.
Light in the display.
Close the lid.
No light in the display.
Check for voltage in the inlet cable.
Machine is switched on. Main switch is in position ”1”.
Check that line circuit breaker of the machine has been switched on.
Check if power supply is OK.
Replace the fuse (max. 3A inert).
Machine is not running.
Light in display.
Close the lid. Check that there is voltage to the motor. Replace the motor.
4
www.coloquick.com
Comments
coloQuick thawing unit
Problem
What is happening
Solution
Water temperature is not rising – or only slowly.
Machine is running.
If the green lamp on the front of the machine is on, then try to affect the thermal fuse behind the front cover by pushing the button hard. If the thermal fuse was switched off, a ”click” is heard.
Contactor has been activated.
Check that contactor has been activated.
Heating element is cold.
Check that there is voltage to the heating element.
Comments
Replace heating element. Motor is running, but cartridges in the water tank are not rotating.
Bolt has broken.
Mount a new bolt.
Motor is not running.
Lid switch not activated.
Check plate of the lid switch. Check lid switch. Replace lid switch.
Wrong display of temperature control.
Fuse defective.
Replace fuse.
Wrong colostrum temperature when feeding.
Temperature sensor must be replaced. Temperature offset in control to be adjusted.
If control or temperature sensor is replaced temperature offset must be set in the control. Contact Calvex A/S.
Control to be replaced. Heating/thawing of colostrum takes too long.
Cartridges are not rotating.
Screwbolt in the coupling must be replaced.
Cartridges are rotating.
Check voltage and power supply to heating element. Check quantity of colostrum that is thawed/heated and colostrum quality. Check that freezer temperature is -16 degrees C.
5
www.coloquick.com
www.coloquick.com
Factors that influence thawing time negatively are: Good colostrum quality, freezer tempera ture below -16 degrees C and a larger quantity of colostrum than 4 litres per bag.
5
Troubleshooting
Pasteur
Problem
What is happening
Solution
Machine is not running.
No light in the display.
Turn main switch into position ”1”.
Light in the display.
Close the lid. 1-phased models have line circuit breaker for the power supply.
Machine is switched on. Main switch is in position ”1”.
No light in the display.
Check for voltage in the connecting cable. Check that line circuit breaker of the machine has been switched on.
Check if the power supply is OK.
Check that the two multiple plugs on the left side of the control card have been correctly mounted.
Replace the fuse (max. 3A inert).
6
www.coloquick.com
Comments
Pasteur
Problem
What is happening
Solution
Comments
Light in the display.
Machine is not running.
Close the lid.
Motor protection box has a PTC resistance and should therefore be able to ”reset” itself after the motor switched off.
Check that line circuit breaker of the machine is switched on. Motor switched off by motor protection due to overload. Check that cartridges can rotate freely and that there are no foreign bodies in the tank. Check connections to motor. Check motor protection box (polyfuse). Replace motor. Machine is switched on, but motor is not running.
Lid is open.
Close the lid.
Lid is closed.
Check plate of the lid switch. Maybe it is skew. Check lid switch.
Temperature is not rising – or only slowly.
Machine is running.
Affect the thermal fuse behind the front cover by pushing the button hard. If the thermal fuse was switched off, a ”click” is heard.
Contactor has been activated.
Check that there is voltage to the heating element.
Heating element is cold.
Replace heating element.
Motor makes noise or vibrates slightly.
Motor is roaring or vibrating.
Replace motor.
Motor is running, but cartridges in the water tank are not rotating.
Split-pin has broken.
Mount a new bolt of hard steel.
Machine leaks.
Machine is untight.
Contact Calvex A/S.
7
www.coloquick.com
www.coloquick.com
7
Troubleshooting
Pasteur
Problem
What is happening
Solution
Comments
Display shows error code E01:
Motor switched off by motor protection due to overload.
Check that cartridges can rotate freely and that there are no foreign bodies in the tank.
There was no feedback from motor for 20-25 seconds.
Check connections to motor.
Motor protection box has a PTC resistance and should therefore be able to ”reset” itself after the motor switched off.
Appears if the water inlet valve has been open for more than 20 minutes and the water tank has not been filled up with water.
Check water supply.
Filter choked up.
Clean filter.
Solenoid valve defect.
Replace solenoid valve.
Display shows error code E03:
It takes more than 10 minutes to empty the tank.
Discharge choked.
Water outlet error.
Motor valve for water outlet is not opening.
Check auxiliary relay for motor valve. Check connections and control voltage (A2) to motor valve.
Discharge choked up.
Clean discharge.
No connection to temperature sensors for more than 5 seconds.
Check cablings.
Check that heating element is connected.
Heating element(s) error.
Appears if the temperature for a period of more than 5 minutes will not rise by more than 0.2 degrees.
Display shows error code E06:
Appears if temperature rises above 70 degrees.
Check that relay for heating element switches off.
Motor error.
Display shows error code E02: Water inlet error.
Display shows error code E04:
Display shows error code E05:
Check that sockets for temperature sensors have been mounted.
Check, if thermal fuse switched off.
Check that control signal from control is not available.
Too high temperature.
8
www.coloquick.com
Please note that all control signals from the control print are ”chassis”.
Pasteur
Problem
What is happening
Solution
Display shows error code E07: Communication problems.
Appears if there are communication problems to EEPROM or RTC (clock).
Mount cablings.
Display shows error code E08:
Appears if there is an “illegal� feedback from the water level sensors. For instance if L1 (lower sensor) does not warn that it is covered - contemporary with the second sensor from the bottom breaking off.
Dirt must be removed from the sensors.
Appears if the water level stands below L2 (second from the bottom) when running a program.
Check that discharge valve closes correctly.
Display shows error code E10: High water level.
Water overflows level 3.
Check overflow for choking.
Display shows error code E11: Temperature difference.
Set-temperature is >4 degrees higher when running a program.
Check that temperature sensors have been lubricated sufficiently with heat transfer paste.
Display shows error code E12: Temperature difference.
Set-temperature is >4 degrees lower when running a program.
Check that temperature sensors have been lubricated sufficiently with heat transfer paste.
Display shows error code E13: Lid open when running a program.
The lid is open for more than 15 seconds when running a program.
Close the lid.
Water level sensor error.
Display shows error code E09: Low water level.
9
www.coloquick.com
Comments
Check connection to sensors.
Check water supply for sufficient flow.
www.coloquick.com
4 permitted during cooling.
9
Troubleshooting
Pasteur Maxx 4
Problem
What is happening
Solution
Machine is not running.
No light in the display.
Turn main switch into position ”1”.
Machine is switched on. Main switch is in position ”1”.
No light in the display.
Check for voltage in the connecting cable. Check that line circuit breaker of the machine has been switched on. Check that the two multiple plugs on the left side of the control card have been correctly mounted. Check if the power supply is OK.
Machine is switched on, but motor is not running.
Light in the display.
Close the lid of the water bath thus activating the safety fuse.
Comments
Check that 6A line circuit breaker for 24 V has been connected. Check for voltage to the motor. Check motor protection box. Check for operating signal to motor protection box. Replace the motor.
10
www.coloquick.com
Please note that all control signals from the control print are ”chassis”.
Pasteur Maxx 4
Problem
What is happening
Solution
Water temperature is not rising - or only slowly.
No voltage on heating element(s).
Check that line circuit breakers of the heating elements have been switched on.
Comments
Voltage on heating element(s). Check that contactors of heating elements have been switched on. Check that thermal fuses have been connected. If not affect the button to a �click�. Replace heating element(s).
Motor is roaring.
Motor is roaring or vibrating.
Replace motor.
Motor is running, but cartridges in the water tank are not rotating.
Toothed belt snapped.
Replace toothed belt.
Taper bushes are loose.
Check that slot is in place and tighten the taper bushes.
No water in the tank.
No water supply.
Check water supply.
Filter(s) choked up.
Clean filter(s).
Defect solenoid valve(s) for water inlet.
Replace solenoid valve(s).
Motor switched off by motor protection due to overload.
Check that cartridges can rotate freely and that there are no foreign bodies in the tank.
Motor is worn.
Replace motor.
Motor switches off in operation.
11
www.coloquick.com
www.coloquick.com
11
Troubleshooting
Pasteur Maxx 4
Problem
What is happening
Solution
Comments
Display shows error code E01:
Motor is not running. No feedback from motor for 20-25 seconds.
Check connections to motor.
Motor switched off by motor protection due to overload .
Check that cartridges can rotate freely and that there are no foreign bodies in the tank.
Motor protection box has a PTC resistance and should therefore be able to ”reset” itself after the motor switched off.
Appears if the water inlet valve has been open for more than 20 minutes and the water bath has not been filled up with water.
Check water supply.
Filter(s) choked up.
Clean filter(s).
Defect solenoid valve(s) for water inlet.
Replace solenoid valve(s).
Motor valve for water outlet is not opening.
Check auxiliary relay for motor valve.
Motor error.
Display shows error code E02: Water inlet error.
Display shows error code E03:
Check connections and control voltage (A2) to motor valve.
Water outlet error.
Display shows error code E04:
Discharge choked up.
Clean discharge.
No connection to one or more temperature sensors for more than 20 seconds.
Check conductors and socket-outlet and plugs for temperature sensors.
Temperature sensor error.
Display shows error code E05:
From program 9991 you may see which sensors are not giving correct feedback. Appears if temperature in 5 minutes rises less than 0.2 degrees C.
Heating element(s) error.
12
www.coloquick.com
Check that both line circuit breakers and thermal fuses for heating elements are switched on.
Please note that all control signals from the control print are ”chassis”.
Pasteur Maxx 4
Problem
What is happening
Solution
Display shows error code E06:
Appears if temperature exceeds 70 degrees C.
Check temperature setting. Check that temperature sensors have been lubricated sufficiently with heat transfer paste.
Too high temperature.
Display shows error code E07: Communication problems.
Internal communication error.
Contact Calvex A/S.
Display shows error code E08:
Appears if there is an �illegal� feedback from the water level sensors. For instance if L1 (lower sensor) says it has not been activated at the same time as L2 (second sensor from the bottom) is activated.
Clean the sensors for dirt from the water.
Appears if water level is below L2 (second sensor from the bottom) when running a program.
Check that discharge valve closes correctly.
Water reaches level 4.
Check overflow for choking.
Water level sensor error.
Display shows error code E09: Low water level. Display shows error code E10:
Comments
Check connections to the sensors.
Check water supply for sufficient flow.
Check that water inlet valves will close.
High water level. Display shows error code E11: Temperature difference.
Temperature is more than 4 degrees C too high when running a program.
Check that temperature sensors have been lubricated sufficiently with heat transfer paste.
I display fejlkode E12: Temperature difference.
Temperature is more than 4 degrees C too low when running a program.
Check that temperature sensors have been lubricated sufficiently with heat transfer paste.
Display shows error code E13: Lid open when running a program.
The lid is open for more than 15 seconds when running a program.
Close the lid.
13
www.coloquick.com
www.coloquick.com
Water level at stage 4 is permitted during cooling.
13
www.coloquick.com
Tank / Chassis
OFF
Connection example Power cord 3 x 230V 32A
ON
M05
L1
3x 40A FUSE
L2
M07
24V GND
N P
3x 40A FUSE
M09
24V Power supply
4A fuse
24V
T3
L3
GND
L1
T2
T1
L1
T1
+
M02B HEATER
HEATER
Temperature Probe
24VS
A2
M27
A1
24VS
M02A
M03B
T2
M04B -
L2
M03A
T3
L3
Safety lid lock
DOOR SW Lid Solenoid
M08B
+ O Brown Blue GND Black
24VS
M11
HEAT FUSE
Temperature Probe
M24
M01
Tank side
BOTTOM(1)
MOUNT(2)
Water Level
MIN(3)
MAX(4)
HEAT FUSE
+
24VS
6A fuse
3A fuse
M04A -
L2
M61D
M61C
M61B
21
11
M21
22
12
24
14
Valve In Hot
M61A
GND
24VS
A2
A1
2
24VS
M22
A2
M28
A1
24VS
OPEN
22
12
GND
22
12
24
21
14
24
11
21
GND
14
11
GND
PWM
24VS
M25
24V
PWM module
M27A
P102
M+
M-
P105
M20 ColoQuick Pasteur Controller
P101
P104
M29
8 - NC 7 - HOT IN 6 - LOCK 5 - Valve OUT 4 - Valve IN 3 - MOTOR 2 - HEAT 1 - OGND
10 - GND 9 - 24V 8 - DOOR SW 7 - IN2 6 - Z POS 5 - L1 4 - L2 3 - L3 2 - L4 1 - GND
ColoQuick Pasteur Maxx-4/8 wiring diagram 3X208 – 240 Vac.
Valve In Cold CLOSE GND
7 8 9
14 Motor valve
2 3 4
Temperature sensors
M08A
MOTOR
1 2
+ -
USB
USB
ColoQuick Pasteur Max 3x208 -240 Vac Diagram 1
www.coloquick.com
www.coloquick.com
Ground Tank / Chassis
OFF
Connection example Power cord 3x400Vac+N+G 32A
ON
M05
24V GND
N P
M07
3x16A FUSE
3x 16A FUSE
L2
L1
FIT4 Terminal
M09
24V Power supply
4A fuse
24V
T3
L3
GND
L1
T2
T1
L1
T1
+
M02B HEATER
HEATER
Temperature Probe
24VS
A2
M27
A1
24VS
M02A
M03B
T2
M04B -
L2
M03A
T3
L3
Safety lid lock
DOOR SW Lid Solenoid
M08B
+ O Brown Blue GND Black
24VS
M11
HEAT FUSE
Temperature Probe
M24
M01
Tank side
BOTTOM(1)
MOUNT(2)
Water Level
MIN(3)
MAX(4)
HEAT FUSE
+
24VS
6A fuse
3A fuse
M04A -
L2
M61D
M61C
M61B
21
11
M21
22
12
24
14
Valve In Hot
M61A
GND
24VS
A2
A1
2
24VS
M22
A2
M28
A1
24VS
OPEN
ColoQuick Pasteur Maxx-4/8 wiring diagram 3X400Vac
22
12
GND
22
12
Valve In Cold CLOSE GND
14
24
21
GND
24
14
11
21
11
GND
PWM
24VS
M25
24V
PWM module
M27A
P102
M+
M-
P105
M20 ColoQuick Pasteur Controller
P101
P104
M29
8 - NC 7 - HOT IN 6 - LOCK 5 - Valve OUT 4 - Valve IN 3 - MOTOR 2 - HEAT 1 - OGND
10 - GND 9 - 24V 8 - DOOR SW 7 - IN2 6 - Z POS 5 - L1 4 - L2 3 - L3 2 - L4 1 - GND
7 8 9
15 Motor valve
2 3 4
Temperature sensors
M08A
MOTOR
1 2
+ -
USB
USB
ColoQuick Pasteur Max 3x400 Vac Wiring Diagram 1
15
www.coloquick.com
ø5
200mm
Ground
Lid
Tank
Door
Tank
M10
2 pole 4A fuse
Tank / Chassis
L2
HEATER
M02
OFF
ON
M05
Tank side
T3
L3
L1
T1
-
HEAT FUSE
M03
+
M01
Temperature Probe
M08
12V GND
DOOR SW Lid Solenoid
M66
A2
A1
22 21 24
12 11 14
M65
M64
Motor valve
M62 M63
7 8 9
PWM
P102
8 - NC 7 - OUT6 6 - LOCK 5 - Valve OUT 4 - Valve IN 3 - MOTOR 2 - HEAT 1 - OGND
1 2 3
1 2
MOTOR
1 2
+ -
2 3 4
M07
ColoQuick Pasteur2 Single Phase 208-240V wiring diagram
T2
M04
L2
12V Power supply
N P
P101
M60 ColoQuick Pasteur Controller
P104 10 - GND 9 - 12V 8 - DOOR SW 7 - IN2 6 - Z POS 5 - L1 4 - L2 3 - L3 2 - L4 1 - GND
M+
ø5
Power cord 1 x 230V 30A
L1
M07
3x 40A FUSE
MOUNT(2)
MIN(3)
BOTTOM(1)
Water Level
MAX(4)
M61
M-
OPEN
M27A
CLOSE GND
16 Valve In
Temperature sensor
ColoQuick Pasteur2 208 - 240 Vac wiring Diagram 1
www.coloquick.com
www.coloquick.com
ø5
Lid
Tank
Door
Tank
M10
HEATER
M02
OFF
ON
M05
Tank side
T3
L3
L1
T1
-
HEAT FUSE
M03
+
M01
Temperature Probe
12V GND
DOOR SW
17
Lid Solenoid
M66
A2
A1
22 21 24
12 11 14
M65
M64
Motor valve
M62 M63
7 8 9
PWM
P102
8 - NC 7 - OUT6 6 - LOCK 5 - Valve OUT 4 - Valve IN 3 - MOTOR 2 - HEAT 1 - OGND
ColoQuick Pasteur2 1-Phase 230V wiring diagram
T2
M04
L2
M08
12V Power supply
N P
P101
1 2 3
1 2
MOTOR
1 2
+ -
2 3 4
M07
M60 ColoQuick Pasteur Controller
P104 10 - GND 9 - 12V 8 - DOOR SW 7 - IN2 6 - Z POS 5 - L1 4 - L2 3 - L3 2 - L4 1 - GND
M+
200mm
ø5
Ground
Tank / Chassis
N
2 pole 4A fuse
Power cord 1 x 230V+N+G 32A
L1
M07
3x 40A FUSE
MOUNT(2)
MIN(3)
BOTTOM(1)
Water Level
MAX(4)
M61
M-
OPEN
M27A
CLOSE GND
17 Valve In
Temperature sensor
ColoQuick Pasteur2 230 Vac wiring Diagram 1
www.coloquick.com
200mm
ø5
Lid
Tank
Door
Tank
M10
2 pole 4A fuse
M02
HEATER
FIT4 Terminal
OFF
ON
M05
Tank side
T3
L3
L1
T1
-
HEAT FUSE
M03
+
M01
Temperature Probe
M08
12V GND
DOOR SW Lid Solenoid
M66
A2
A1
22 21 24
12 11 14
M65
M64
Motor valve
M62 M63
7 8 9
PWM
P102
8 - NC 7 - OUT6 6 - LOCK 5 - Valve OUT 4 - Valve IN 3 - MOTOR 2 - HEAT 1 - OGND
1 2 3
1 2
MOTOR
1 2
+ -
2 3 4
M07
ColoQuick Pasteur2 3-Phase 230Vac wiring diagram Rev. 14
T2
M04
L2
12V Power supply
N P
P101
M60 ColoQuick Pasteur Controller
P104 10 - GND 9 - 12V 8 - DOOR SW 7 - IN2 6 - Z POS 5 - L1 4 - L2 3 - L3 2 - L4 1 - GND
M+
ø5
N
3x 16A FUSE
Tank / Chassis
Ground
Power cord 3 x 230V+N+G 16A
L1
M07
MOUNT(2)
MIN(3)
BOTTOM(1)
Water Level
MAX(4)
M61
M-
OPEN
M27A
CLOSE GND
18 Valve In
Temperature sensor
ColoQuick Pasteur2 3X230 Vac wiring Diagram 1
www.coloquick.com
www.coloquick.com
ø5
FIT4 Terminal
Lid
Tank
Door
Tank
M10
2 pole 4A fuse
M02
HEATER
OFF
ON
M05
Tank side
T3
L3
L1
T1
-
HEAT FUSE
M03
+
M01
Temperature Probe
M08
12V GND
DOOR SW
19
Lid Solenoid
M66
A2
A1
22 21 24
12 11 14
M65
M64
Motor valve
M62 M63
7 8 9
PWM
P102
8 - NC 7 - OUT6 6 - LOCK 5 - Valve OUT 4 - Valve IN 3 - MOTOR 2 - HEAT 1 - OGND
ColoQuick Pasteur2 3x400Vac. wiring diagram.
T2
M04
L2
12V Power supply
N P
P101
1 2 3
1 2
MOTOR
1 2
+ -
2 3 4
M07
M60 ColoQuick Pasteur Controller
P104 10 - GND 9 - 12V 8 - DOOR SW 7 - IN2 6 - Z POS 5 - L1 4 - L2 3 - L3 2 - L4 1 - GND
M+
200mm
ø5
N
3x 16A FUSE
Tank / Chassis
Ground
Power cord 3 x 400V+N+G 16A
L1
M07
MOUNT(2)
MIN(3)
BOTTOM(1)
Water Level
MAX(4)
M61
M-
OPEN
M27A
CLOSE GND
19 Valve In
Temperature sensor
ColoQuick Pasteur2 3X400 Vac Diagram 1
20
www.coloquick.com
ø5
200mm
ø5
Lid
Tank
Tank / Chassis
PowerCable 3x230Vac+N+G 16A
Door
Tank
N
L3
L2
L1
1x 1,6A FUSE
M06
FIT4 Terminal
M07
3x 16A FUSE
1,6 A
Main Breaker
OFF
ON
M05
M09
12V GND
12V / 6A Power supply
N P
L3
L1
M04
L2
Relay 3x16A (min) T3 T2 T1
HEAT FUSE
M03
-
+
14
X2 (+)
23
M31
M34
X1
Motor SW
Temperature Probe
X2
Regulator
24
1 2 3
1 2
M08
MOTOR
1 2
+ -
ColoQuick Thaw wiring diagram 3X230 Vac
Temperature Probe
Heater Status lamp
X1 (-)
M33
DOOR SWITCH
13
M01
M30
10 11 – PTC/TC + 12 – PTC/TC -
1-C 2 - NC 3 - NO 4-C 5 - NC 6 - NO 7 - SUPPLY 8 - SUPPLY
ColoQuick Thaw 3X230 Vac Wiring Diagram 1
21
www.coloquick.com
www.coloquick.com
ø5
200mm
ø5
Lid
Tank
Tank / Chassis
Power cable 3x400Vac+N+G 16A
Door
Tank
N
L3
L2
L1
1x 1,6A FUSE
M06
FIT4 Terminal
M07
3x 16A FUSE
1,6 A
Main Breaker
OFF
ON
M05
M09
12V GND
12V / 6A Power supply
N P
L3
L1
M04
L2
Relay 3x16A (min) T3 T2 T1
HEAT FUSE
M03
-
+
14
X2 (+)
21
23
M31
M34
X1
Motor SW
Temperature Probe
X2
Regulator
24
1 2 3
1 2
M08
MOTOR
1 2
+ -
ColoQuick Thaw wiring diagram 3x400 Vac.
Temperature Probe
Heater Status lamp
X1 (-)
M33
DOOR SWITCH
13
M01
M30
10 11 – PTC/TC + 12 – PTC/TC -
1-C 2 - NC 3 - NO 4-C 5 - NC 6 - NO 7 - SUPPLY 8 - SUPPLY
ColoQuick Thaw 3X230 Vac Wiring Diagram 1
22
www.coloquick.com
ø5
200mm
ø5
Lid
Tank
Power Cable 2 x 230V 30A
Door
Tank
Tank / Chassis
L2
L1
2x 4A FUSE
M06
M07
3x 40A FUSE
OFF
ON
M05
M09
12V GND
12V / 6A Power supply
N P
L3
L1
M04
L2
Relay 3x40A (min) T3 T2 T1
HEAT FUSE
M03
-
+
14
X2 (+)
23
M31
M34
X1
Motor SW
Temperature Probe
X2
Regulator
24
1 2 3
1 2
M08
MOTOR
1 2
+ -
ColoQuick Thaw 208 – 230Vac. wiring diagram .
Temperature Probe
Heater Status lamp
X1 (-)
M33
DOOR SWITCH
13
M01
M30
10 11 – PTC/TC + 12 – PTC/TC -
1-C 2 - NC 3 - NO 4-C 5 - NC 6 - NO 7 - SUPPLY 8 - SUPPLY
ColoQuick Thaw 208 - 230 Vac Diagram 1
Filling station
23
www.coloquick.com
www.coloquick.com
23
3. edition 0113
The Colostrum Management System
coloquick_service_manual_EN