The Designer Shortage— Where Can We Find Them

Achallenge for the component industry is brewing no matter if you are located in an area where new home construction continues to be strong or your market is slowed by the combined effects of high interest rates and stubbornly high inflation. Be it single family or multi-family, new designers are not entering the industry as quickly as old grey hairs like me are leaving.

From the mid to late 1990s until the 2008 crisis approached, component designers were in high demand, commanding ever higher salaries. The conditions at the time led Thom McAnally and I to create the Component Systems Institute to help train new designers for the industry. In many cases, design capacity was the limiting constraint for truss plant capacity across North America, and design salaries climbed from the demand pressure. As the market slowed and even collapsed, designers that had been hired at high salary levels were often the first to be let go, as business owners understandably sought to cut costs. We’ve seen that many designers left the truss and component industry, never to return. Some eventually returned to the business as word of increasing demand brought experienced people back, but it certainly feels like the designer shortage has stayed with us throughout this recent boom.

New Designer

Today, we are once again looking at an uncertain economic future, combined with demographic factors common to most industries that see workers transitioning to retirement at a faster rate than they are being replaced. Understanding that it is important to keep an eye on the bottom line, component manufacturers also need to try to maintain a long-term view of the importance of skilled designers to their long-term business success. To the greatest extent possible, component manufacturers need to continuously find and develop new designers. Some will be the backbone of your business in the years to come, and some will flame out and be gone before you know it.

So, if you’re looking for designers, where can you find them? Here are a few suggestions.

Local community colleges and trade schools: Graduates of these programs will usually have CAD experience, along with some experience reading blueprints and spatial aptitude. I would encourage you to think about engineering technologists, drafting, and carpentry programs. And while it may seem counterintuitive, I have a caution about recruiting from architectural programs – those programs offer many of the proper skills, but in my experience people in these programs have an artistic/creative need that isn’t met long-term in a component designer role.

Your existing employees: Aside from the positive aspects of having your current employees see the possibility of future advancement, promoting from within offers other benefits as well. One of the big wins is that they are already local, so they probably are less likely to leave the area where they have an established network of family and friends.

Local framers: While many framers will happily work their entire careers on site, I have met more than one who is tired of working bent over in the hot sun/freezing cold all day every day. So long as they are intelligent and comfortable with technology, they can become great component designers. They are already familiar with reading blueprints and visualizing how that translates into the final building. Plus, their insights may be a real benefit to your other designers as well.

Of course, both Thom and I are always here to help you find experienced designers, so be sure to reach out if that is what you need. Just don’t forget that those experienced people needed to start somewhere, and it’s up to all of us to keep filling that void.

If you want help finding that next perfect component designer or design job in Canada, please contact me. If your work is in the mass timber world anywhere in North America, I’d love to talk to you about connecting you to that next great job or candidate. You can reach me at secord@thejobline.com, or 800-289-5627 ext. 2. I’m also happy to engage at: LinkedIn.com/in/geordiesecord. www.thejobline.com

•

2003 JDH TRUSSMASTER SIDEOFFLOADING TRUSS TRAILER

10,000 Lb Tandem Axles (Dual Wheels). 26,000 GVWR. Deliver Trusses Vertically. Stretch from 18' to 38'. Raise Loads

Hydraulically. Air Brakes.

$6,900 FOB CA

Wasserman & Associates

800-382-0329 www.wasserman-associates.com

TRUCKS & TRAILERS

• Modified by LMI TENN

• 8" Floor Cross Members

• Reinforced Roof

• 22.5 Tubeless Tires

• Sl iding Tandem Axle (for weight distribution) (FOB PA) $9,900

Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Step Deck Roller Trailer

40'-0" Lower Deck, 12'-6" Upper Deck

Hydraulic Tilt on Lower Deck

Lower Deck has 3 Split Load Lifts

Roller Locks (upper & lower decks)

GVWR: 37,000 KG (81,400 LB)

Air Ride Suspension

Tires & Brakes are Good

Winches & Straps

Price in US Dollars

$30,000 NOW $24,900 FOB ON

Wasserman & Associates

800-382-0329 www.wasserman-associates.com

2006 Stoll 30′ Gooseneck roll off trailer features a hydraulic lift neck and locking rollers. Brakes have approximately 20% life left, 6 tires have approximately 60% life left, and 2 tires have approximately 25% life left. Lights are all working and DOT expired 12/31/22.

As is, Where is $11,990 FOB OH Wood Tech Systems

765-751-9990 www.woodtechsystems.com

1987 Barnes Pole Trailer

1987 Barnes pole trailer, model RTY. Carries trusses peak down, with spans from 28’6″ to 46′-0″. Includes bolster arms for shorter trusses, center chains and split support tubes. Has current Pennsylvania DOT inspection valid through March of 2023.

$8,129 NOW $6,909 FOB PA

Wood Tech Systems

765-751-9990 www.woodtechsystems.com

• 2007 Freightliner M2 Flatbed Truck (168,000 Miles)

• New Tires in 2022 ($12,000 Value)

• Hiab 322E-7 Hipro Crane (FOB WA) $89,000 NOW $75,000 800-382-0329 | www.wasserman-associates.com

• Hydraulic Front End

• Fixed Tandem

• Spring Suspension

• Air Brakes (Good Condition)

• Locking & Controllable Rollers

• Headache Rack

• Out of service in 2021 (DOT is not current)

$19,750 FOB KS

Wasserman & Associates

800-382-0329 www.wasserman-associates.com

• 18 HP Spindle

Typewriter Tool Changer

• X, Y and Z Servo Axis

5 Position

• Q-CORE Controller (THM Version 8.73 - Windows7)

• Reads NC Files via Network or USB Flash Drive

• 5' x 20' Fixed Table

• Roller Hold Down

• Program Side Fence

• Auto Tool Length

• Auto Lubrication

• Excludes Dust Collector

• The seller was cutting OSB Sheathing and 1 1/4" TimberStand Stair Stringers

• Video available upon request

$29,500 FOB MN

Wasserman & Associates

800-382-0329 www.wasserman-associates.com

2022 Powermatic

Dual-Bag Dust Collector

2022 Powermatic Dual Bag Dust Collector. Industrial dust collector, dual-bag, 1800 CFM with 6″ port. Includes supply of 6″ flex hose. System has 10 Cu. Ft. capacity. 3HP, 3Ph, 5 amp, 460/V with onboard starter. $5,497 FOB VA

Wood Tech Systems

765-751-9990 www.woodtechsystems.com