ConExpo-Con/AGG 2023 Special Edition

TIGH TS EASIL HTEN LARGE BOLLT LY Y

TIGHTEN MULTIPLE BOLTS SIMULTANEOUSLLY Y

It was decided that a combined show would become “a tradeshow for the ages,” and so the first ConExpo-Con/AGG show was held in 1996 at the Las Vegas Convention Center.

The setting and dual configuration allowed manufacturers to exhibit a wide range of diverse equipment, technology and products. It broke records over the years.

In 2020, ConExpo reached almost 3 million square feet of exhibit space and hosted more than 2,300 exhibitors.

“Needless to say, we look forward to the 2023 show and continuing to see a thriving industry,” said AEM. “While ConExpo-Con/AGG displays the latest equipment and technology for the construction and aggregates industries, we reflect back on our roots and how far we’ve come from some of the early equipment prototypes.”

Doing the Walkaround

In 1909, horse-drawn graders were a crucial piece of machinery for both highway officials and road-building contractors.

The steam mixer, used in early paving operations, drew thousands to the Road Show, considered the ‘World’s Fair of the Construction Industry.’

Graders of all sizes and makes, featuring six speeds forward, three reverse, power steering and 120 horsepower, were on display that year.

“Horsepower was a comparison back then as it still is important in modern machines — albeit in a much less literal sense,” said SANY America.

At the 1957 show in Chicago, contractors could also compare every American-made paver in operation.

“It was the largest indoor trade show ever staged in the U.S.,” said AEM.

In fact, the Chicago International Amphitheatre was

enlarged by 100,000 square feet to accommodate the event.

For 2023, AEM is proud of the successful addition of the new West Hall and Diamond Lot at the Las Vegas Convention Center. These additions have shown “how we are taking the construction industry to the next level,” said Dana Wuesthoff, show director. “Now at 2.8 million square feet of exhibits, there’s more for construction pros to see than ever before.”

Nearly 5 percent bigger than the 2020 record size, ConExpo will feature 1,800 exhibitors and 175-plus education sessions during its run in March.

“Recent additions to the Las Vegas Convention Center [LVCC] will make it the easiest to get around as well,” said AEM.

Enough for Everyone

Beneath the entire LVCC campus runs the Convention Center Loop, an underground transportation system.

It will transport convention attendees throughout the campus in under two minutes in Tesla vehicles, free of charge.

“This is the event that construction professionals can’t miss,” said Phil Kelliher, show chair and Caterpillar senior vice president. “Seeing the new equipment and techniques on a screen doesn’t compare to seeing it all in person.”

Attendees can see the equipment, ask questions of the manufacturers themselves and really understand what the equipment and education can do for career and business, said Kelliher.

SANY America believes ConExpo, held every three years, is “the must-attend show” for anyone working in construction or materials.

The venue has grown and expanded, as well. Since that first combined show in 1996, ConExpo has stayed at the LVCC.

Just more than a decade later, attendance reached its peak

— 144,600 attendees at the 2008 show.

In 2017, ConExpo swelled to cover its largest footprint yet, spanning more than 2.8 million square feet of event, training and exhibitor space.

Past shows have highlighted the capabilities and possibilities offered by telematics, remote fleet monitoring and fleet utilization reporting.

The “Internet of Things” and connected devices, computer-assisted workflows and even 3D printing in construction have been front and center.

And the 2017 show featured the world’s first-ever 3Dprinted excavator, said SANY America.

“New tech has made this show continue to draw crowds looking to see the latest and greatest the industry has to offer year after year.”

This year, ConExpo-Con/AGG has hosted a creative competition for kids, with prizes sponsored by Sherwin Williams.

Winning artwork and selected pieces representing various age categories will be part of an art installation in Las Vegas.

The works of art will be displayed in the education area on the 2nd floor of West Hall Las Vegas Convention Center for viewing throughout the show.

Youth up to age 15 are encouraged to enter one original drawing or painting that includes a piece of construction equipment.

The top three winners in each age category will receive a cash prize compliments of Sherwin Williams.

“This is a fun new feature that will encourage children who love art and just might be enamored with construction equipment to participate,” said Wuesthoff, “If you think about it, art and construction are very similar. The artist, architect or engineer’s intentions are present and the space is full of possibilities.”  CEG

CONEXPO from page 6

In 2020, ConExpo reached almost 3 million square feet of exhibit space and hosted more than 2,300 exhibitors.

Today’s shows draw more than 130,000 attendees from around the world who gather every three years.

Cat Set to Showcase Its Largest ConExpo Exhibit Ever

The stage is set for Caterpillar’s largest exhibit to date at ConExpo-Con/AGG 2023 where the company will highlight its latest products, services and technologies while paying tribute to those who build the world’s infrastructure.

The company’s 70,000 sq. ft. outdoor demonstration arena will anchor the massive display known as Operator Stadium located in the expo’s Festival Lot.

New Caterpillar technology, services and sustainability hubs provide visitors the opportunity to look beyond the iron for ways to increase operating efficiencies and improve machine uptime. Visitors will find new and current models and battery-electric machine prototypes during the expo from March 14-18 in Las Vegas.

Latest Equipment

The extensive Cat equipment display in the Festival Lot includes more than 30 machines, including model unveilings and battery-electric model prototypes with charging stations. Visitors will see two main equipment demonstrations each day — one focused on the latest Cat Technology, and one that will spotlight the company’s full equipment line up. Additionally, Caterpillar will be providing unique daily spotlight demonstrations that will take a deep dive into key industry topics including improving fuel efficiency and jobsite efficiency, the evolution of technology, and convenient, scalable solutions for all customers.

The new Cat 950 medium wheel loader on display offers premium performance and simple-to-use technologies to help boost operator efficiency and increase productivity, while extended service intervals help lower maintenance costs.

Visitors will be treated to a preview of the Next Generation Cat 926, 930 and 938 small wheel loaders — slated for production in late 2023 — which feature new technologies designed to make work easier, a reimagined operator environment and extended service intervals.

For paving contractors, the half-lane Cat PM822 cold

planer features integrated Cat Grade technology and the latest System K rotor options that deliver performance, productivity and cutting precision. With its compact size, enhanced mobility and easy transport, the Cat AP455 Mobil-trac asphalt paver offers great features for both large and small contactors when paving urban streets, parking lots and rural roads.

Furthermore, a new three-dimensional screed plate with modular fastening system improves mat density and smoothness, while reducing screed plate change time up to 80 percent, according to the manufacturer.

Latest Power

Caterpillar Industrial Power Systems Division will exhibit in booth S84329 in the South Hall a wide and rapidly growing portfolio of high-efficiency Cat industrial power solu-

tions. The exhibit includes the unveiling of a new high power internal combustion engine, as well as the leading-edge lithium-ion battery technologies under development.

Engines on display, such as the C3.6 IPU, C7.1 and C9.3B, meet EU Stage V, U.S. EPA Tier IV Final emission standards and are compatible with biodiesel up to B20 and hydrotreated vegetable oil (HVO) to EN15940, to help customers power a better, more sustainable world. The booth also will showcase Caterpillar’s technical services and market expertise leveraged by the global Cat dealer network to maximize the efficiency and extend the lifecycles of offhighway equipment, including Cat remanufactured and service replacement engines.

Services Hub: Easy, On-the-Go

Caterpillar offers a range of service options that are easy, convenient, flexible and sustainable. The new Cat Central app is the latest tool for convenient access to genuine Cat parts and support. This on-the-go experience makes it easy for customers to find and order Cat parts, scan and shop a specific asset instantly and find answers to maintenance and support questions.

Another new service-related solution is the new Cat SIS2GO app which takes the guesswork out of maintaining, troubleshooting and repairing Cat equipment. Both apps are available on Windows, iOS and Android platforms.

The Services Hub is located in the Festival Lot, and the hub will include Caterpillar subject matter experts (SME) who will help guide attendees through several maintenance options for Cat equipment.

Customer Value Agreement (CVA) options offer easy ownership plans customized to fit a customer’s business needs to extend equipment life and maximize the investment. Cat Certified Rebuild programs return end-of-life machines, systems and components to like new condition. Cat Reman products bring new life to assets with like-new performance at a fraction of the cost of buying new. Cat SelfService Options deliver convenient, simple parts ordering and machine repair support for those who prefer to do their own service.

Team members from Cat Financial will be available to discuss the latest leasing and financing programs, including Cat Card, as well as extended protection packages to help

The company’s 70,000-sq.-ft. outdoor demonstration arena will anchor the massive display known as Operator Stadium located in the expo’s Festival Lot.

A new service-related solution is the new Cat SIS2GO app which takes the guesswork out of maintaining, troubleshooting and repairing Cat equipment. see CATERPILLAR page 24

EJECTOR PAN 12’ CUT, 13’ WIDE, 27,000 LBS, 26.5X25 TIRES @ 80%, DELIVERY & FINANCING AVAILABLE........ $75,000

HL940ATM: TOOL MASTER SERIES, ISO COUPLER, 6.7

ENG, 4 SPD PWR SHIFT TRANS, 23.5X25 TIRES, 3YR 3,000

2021 HYUNDAI HL930A: XT HIGH LIFT CONFIGURATION, JRB416 HYD QUICK COUPLER, AUX HYD, RIDE CONTROL, BACK UP CAMERA, AUTO GREASER, 17.5X25 TIRES, HEATED AND COOLED SEAT..........$159,500

2019 HYUNDAI HX145 LCR: AC, AIR RIDE SEAT, CONTROL PATTERN CHANGER, REAR VIEW CAMERA, 10 FT STICK, AUX HYD PLUMBING, 24” TRIPLE GROUSER TRACK SHOES, HYD QC........................$147,500

2010 KLEEMANN MR110ZS EVO: CAT DSL ENG, 36”X102” VIBRATING FEEDER W/ PRESCREEN, 25X13’ DISCHARGE CONVEYOR, 41X31 4 BAR ROTOR IMPACTOR, 36”X6' MAGNET, 5X12 3 DECK SCREEN..$350,000

2018 KOBELCO SK140SR LC-5: CAB HEAT & A/C, AUX HYD, 24” PADS, TB6 PADS, REAR CAMERA, ISUSU DIESEL, 36” BUCKET, DELIVERY & FINANCING AVAILABLE................................................................$86,500

BY DIESEL ENGINE, EQUIPPED W/ CAB, AIR, 12’7” STICK, AUXILIARY HYDRAULICS, 36” PADS, 80” DIGGING BUCKET, LONG UNDERCARRIAGE......................$119,500

2005 LOAD KING JEEP: 74100 GVWR AIR RIDE SUSPENSION, 275/70R22.5 TIRES, BRAKES IN GOOD SHAPE. FIXED FITH WHEEL...... $16,500

2005 KOMATSU WA500-3LK: DIESEL POWER, ENCLOSED CAB, AIR CONDITIONER, 29.5R25 TIRES, 132” BUCKET, CALL FOR MORE INFORMATION ............................................................................$65,000

TIRES @ 60%, 9.8YD GP BUCKET, GOOD CUTTING EDGE, 4 OTHER MACHINES AVAILABLE........$229,500

2021 CATERPILLAR 303.5E2 CR: 4-WAY ANGLE BLADE, QUICK COUPLER, 22” BUCKET, THUMB, AUX HYD, 24 HP DIESEL ENGINE, 9300 LBS, CAB HEAT & A/C, LED LIGHTS ..................................$85,000

2016 DEERE 470G LC: 36”

2020

84” SINGLE SMOOTH DRUM COMPACTOR, PAD FOOT SHELL KIT CURRENTLY INSTALLED, DRUM DRIVE, MULTIPLE FREQUENCY ON THE COMPACTOR, VERY CLEAN SHAPE........

2000 BLAW-KNOX RW100A: JOHN DEERE DIESEL TURBO ENGINE ........ $21,500

2002 MIDLAND SPD-8: JOHN DEERE 4 CYLINDER 4.5 L DIESEL ENGINE, HYDROSTATIC DRIVE, 10’ SPREADING WIDTH, 12” CONVEYOR, CALL FOR MORE INFO ..........................................................................$46,500 NEAL DA350: SEAL COATING MACHINE, 4 CYL DIESEL ENGINE, RUNS OUT GOOD, CALL FOR MORE INFO ............................................$22,500

2021 CASE 21F: CAB, A/C, QUICK COUPLER, 48” FORKS, 365/70R 18 TIRE SIZE, 4 CYLINDER DIESEL ENGINE....................................$92,500

2017 DEERE 844K: AGGREGATE HANDLER, ENCLOSED CAB, AC, REAR VIEW CAMERA, 875/65R29 TIRES, AUTO LUBE, JOYSTICK AND WHEEL STEERING, HEATED SEAT, 144” BUCKET ................................$219,500

2018 DEERE 844KII: CAB HEAT & A/C, AIR SEAT, RIDE CONTROL, JOYSTICK STEERING, 875/65R29

6X6, ENCLOSED CAB, HEAT & A/C, TIDAL WAVE TANK, IN CAB REMOTE CONTROLLED WATER CANNON, REAR SPRAY, SIDE SPRAY, HYD DRIVEN WATER PUMP........$149,500

HAMM H13I:

$118,500

2016 CATERPILLAR 938M: PIN ON 3.5 YD GP BUCKET, TIGHT CENTER AND BUCKET LINKAGE, CLEAN ORIGINAL MACHINE, CAB HEAT & A/C, 20.5X25 TIRES AT 60%................................................................$96,500

2005 CATERPILLAR AS4251C: IN GREAT SHAPE! REMOVED FROM AN AP1000D, CALL FOR MORE INFORMATION................................$12,000

CATERPILLAR TL1055: 10,000LBS CAPACITY, 55’ REACH, CAT C4.4 ENGINE, POWER SHIFT, OUTRIGGERS, CAB HEAT & A/C, CLEAN STRAIGHT MACHINE....................................................................$59,500

2011 CIMLINE MAGMA 230DDH: 230 GALLON CRACK SEALER, ISUZU DIESEL, HEATED HOSE, AIR COMPRESSOR................................$28,500

2005 KOMATSU WA500-3LK: KOMATSU DIESEL POWER, ENCLOSED CAB, AIR CONDITIONER, 29.5R25 TIRES, 132” BUCKET, CALL FOR MORE INFO..................................................................................$65,000

2007 CRAFCO EZ1000EC: CRAFCO EZ1000EC DIESEL MELTER, 265 GALLON VAT, FULL SWEEP MIXER, READY TO WORK..............$18,500

$15,750

CATERPILLAR 95" 950G BALDERSON HOOKUP WEDGE HOOKUP: FORKS TINES DO NOT COME WITH CARRIAGE, THEY WERE SOLD. CARRIAGE IS 23 1/2" HOOKS CENTER TO CENTER........................................$2,500

Caterpillar’s ‘Technology Hub’ to Tout Ease-of-Use, More

secure customers’ investments. Whether they are looking for new or used Cat machines or for repair/rebuild options to keep their current machines operational, Cat Financial experts will help customers make the right decision to support their business — no matter how large or small.

Technology Hub: Solutions for Any Operation

The Caterpillar Technology Hub in the Festival Lot will offer attendees the ability to experience a range of new and existing Cat technologies — VisionLink, Cat Command, VisionLink Productivity, Cat Detect, Cat Grade and Cat Payload. Caterpillar SMEs will be on hand to assist each customer in finding a scalable solution designed to fit the business’s needs and budget.

Its centerpiece exhibit, the “Looking Glass” cube, displays and interactively showcases the five key capabilities of the new Cat VisionLink application — Geofence & Location, Fuel Theft Alerts, Diagnostics, Idle Time/Fuel Burn, and Maintenance.

An interactive wall invites visitors to explore the full suite of VisionLink capabilities for both Cat and non-Cat equipment and non-machine assets.

The hub’s multiple Cat Command stations allow attendees to remotely operate Cat machines located more than 400 mi. away at the Tinaja Hills Demonstration and Learning Center. They are positioned to allow attendees to better experience and learn more about the Command for Dozing, Excavating and Loading technologies.

One of the Command stations allows visitors to try the

“Strike Pay Dirt Challenge,” where participants remotely control an excavator to win a prize.

Sustainability Hub: Choose Your Machine. Choose Your Power

The Caterpillar Sustainability Hub in the Festival Lot will spotlight fuel efficiency and alternative power sources; technologies to fit every operation and budget; and parts and service designed to make uptime fast and easy. Plus, customers will learn about sustainability benefits they can choose today and plan for tomorrow.

Outside the Sustainability Hub, exhibit attendees can view components of Caterpillar’s total site solution for the energy transition, including four battery-electric machine prototypes — the Cat 301.9 mini excavator, 320 medium excavator, 950 GC medium wheel loader and 906 compact wheel loader — in addition to AC and DC charging solutions.

The Caterpillar-designed batteries powering these batteryelectric machines are built on lithium-ion Cat technology with a modular design that offers flexible configurations across multiple applications.

Celebrating Operators

With the quest to prove they are the best, more than 10,000 operators representing more than 32 countries around the world registered to compete in the 2022-2023 Global Operator Challenge.

From 3,500 participants in the first round of local competitions to 84 advancing to the regional semifinals, nine of the world’s best equipment operators will demonstrate their

advanced skill, precision and stamina in hopes of being named the Global Operator Challenge Champion.

The nine finalists competing in Operator Stadium at ConExpo are:

• Pontus Eriksson, representing Zeppelin Sweden

• Sebastian Behr, representing Zeppelin Germany

• Łukasz Mokrzyski, representing Bergerat Monnoyeur Poland

• John Schiedeck, representing Holt Cat (Texas)

• Matt Ferris, representing Empire Cat (Arizona)

• Fernando do Nascimento, representing PESA (Brazil)

• Masato Imai, representing Nippon Caterpillar (Japan)

• Patrick Doheny, representing William Adams (Australia)

• Nick Thompson, representing CavPower (Australia)

The finals kick off on Tuesday morning, March 14, immediately following the expo’s grand opening ceremonies. Throughout the competition, the skills of the finalists will be put to the test in three identical challenges — excavating, loading and hauling/maneuvering the equipment through a variety of obstacles. The champion is set to be crowned on the afternoon of March 14.

All ConExpo-Con/AGG attendees are encouraged to attend the Global Operator Challenge Finals to see first-hand the new equipment, technologies and services on display in Festival Lot exhibit, F9127.

The Finals also will be broadcast live on cat.com.

For more information on the finalists, visit www.cat.com/operatorchallenge. For more information about the Cat ConExpo-Con/AGG experience, visit www.cat.com/en_US/campaigns/event/conexpo-2023.html. 

Visitors will be treated to a preview of the Next Generation Cat 926, 930 and 938 small wheel loaders — slated for production in late 2023 — which feature new technologies designed to make work easier; a reimagined operator environment; and extended service intervals.

CATERPILLAR from page 18

Thumb................................$120,000

2015 CATERPILLAR D4K LGP II, Stk# 6405, 1999 Hrs, Sweeps with Screens...... $87,500

2011 DEERE 850J, Stk# 6524, 5122 Hrs, Enclosed Cab, Heat & A/C, Multi Shank Ripper........................................$130,000

CATERPILLAR 735, Stk# 6427, 9630 Hrs, 35 Ton Capacity, Enclosed ROPS......

2004 VOLVO A35D, Stk# 6028, 13,078 Hrs, 6x6, Jake Brake, Retarder..$130,000

CATERPILLAR D3K LGP, Stk# 5542, 5265 Hrs, ROPS Open, S/N: CAT00D3KHLLL00153..........$65,000

6558 Hrs, Tub Grinder......$140,000

EAST PEORIA, IL

2015 KOMATSU PC210LC-10 $160,000 STK# KMCONS, 3280 HRS, SPRINGFIELD, IL

2014 KOMATSU PC360LC-10 $199,500 STK# KM19566, 3893 HRS, SPRINGFIELD, IL

2017 KOMATSU HM300-5 $335,000 STK# KM19063, 2050 HRS, SPRINGFIELD, IL

2015 KOMATSU D155AX-8 $349,500 STK# KM17233, 3983 HRS, BRIDGETON, MO

2015 KOMATSU PC228USLC-10 $149,500 STK# KM2021516, 4061 HRS, ESCANABA, MI

2008 GRADALL XL4100 $CALL STK# ZZ2022589 7845 HRS, FRANKSVILLE, WI

2018 GRADALL D152 $215,000 STK# ZZ18177, 28 HRS, EAU CLAIRE, WI

2019 KOMATSU PC210LC-11 $239,500 STK# KM2022030, 459 HRS, COLUMBIA, MO

WE ARE HIRING!

Agricultural Tractors

2015 JOHN DEERE 6215R..............................$139,500

2020 JOHN DEERE 6130M..............................$115,000

(6) 2018-2021 JOHN DEERE 6120M............From $79,500

2018 JOHN DEERE 5125R................................$98,500

2022 JOHN DEERE 5100M..................................$CALL

(2) 2017 JOHN DEERE 5085M....................From $59,500

Artic Trucks

(2) 2016 CATERPILLAR 745C......................$339,500 Ea.

(2) 2019 CATERPILLAR 745........................$449,500 Ea.

(4) 2016-2019 CATERPILLAR 725C2..........From $259,500

(2) 2014-2015 CATERPILLAR 725C............From $195,000

Compactors - Padfoot/Smooth Drum

2020 CATERPILLAR 815K..................................$CALL

2007 CATERPILLAR 815F 2................................$CALL

(4) 2013-2017 CATERPILLAR CS66B..........From $125,000

(6) 2016-2022 CATERPILLAR CP56B..........From $125,000

(8) 2017-2022 CATERPILLAR CS56B..........From $125,000

2017 DYNAPAC CT3000....................................$CALL

(2) 2013-2021 HAMM H13I........................From $87,500

2020 HAMM H12I............................................$CALL

Crawler Loaders

(2) 2022 CATERPILLAR 963................................$CALL

(4) 2017-2020 CATERPILLAR 963K............From $265,000

Crawler Carriers

2019 MOROOKA MST4000VD..........................$289,500

(2) 2018 MOROOKA MST3000VD..............From $165,000

(3) 2018-2019 MOROOKA MST2200VD........From $149,500

MOROOKA MST660VD....................................$89,500

Dozers - Crawler

(5) 2018-2022 CATERPILLAR D8T..............From $510,000

(2) 2020 CATERPILLAR D6................................$CALL

2020 CATERPILLAR D6 XL..............................$425,000

(8) 2019-2022 CATERPILLAR D6 LGP..........From $425,000

(3) 2014-2019 CATERPILLAR D6T XW........From $209,500

2016 CAT D6N LGP......................................$179,500

2018 CATERPILLAR D6N XL................................$CALL

2018 CATERPILLAR D6K 2XL..........................$185,000

2012 CATERPILLAR D6K XL................................$CALL

2017 KOMATSU D61EXi-24................................$CALL

(2) 2002 KOMATSU D71PXi-24............................$CALL

Dozers - Wheel

2015 CATERPILLAR 834K..............................$285,000

Motor Graders

2020 CATERPILLAR 150AWD..........................$407,500

(2) 2017-2019 CATERPILLAR 140M3....................$CALL

(2) 2016-2017 CATERPILLAR 14M VHP......From $420,000

Excavators - Crawlers

(4) 2019 CATERPILLAR 390FL..................From $915,000 (2) 2019-2020 CATERPILLAR 374FL......................$CALL (2) 2017-2019 CATERPILLAR 349FL..........From $329,500

(2) 2021-2022 CATERPILLAR 349........................$CALL

(3) 2019 CATERPILLAR 336....................From $279,500

(2) 2017-2018 CATERPILLAR 336FL..........From $219,500 (2) 2023 CATERPILLAR 330-07............................$CALL

2015 CATERPILLAR 323FL..............................$132,500

2018 CATERPILLAR 320................................$179,500

2017 CATERPILLAR 316FL..............................$159,500

2013 CATERPILLAR 6030............................$1,295,000

Rigid Frame Trucks

(5) 2007-2008 CATERPILLAR 777F........................$CALL

Skid Steers - Track

(8) 2020-2021 JOHN DEERE 333G........................$CALL (3) 2020-2022 CATERPILLAR 299D3 XPS................$CALL (2) 2021 CATERPILLAR 299D3............................$CALL

Water Equipment - Tower/Tanks

(6) 2020-2022 Klein KPT-120 Water Towers..From $62,500

2022 KLEIN HURRICANE BRAVO 12XD WATER PUMP$65,000

Winch

PACCAR PA110VS245......................................$7,500

Water Equipment - Trucks

2013 CATERPILLAR 740B....................................$329,500

2022 CATERPILLAR 730-04....................................$CALL (2) 2017-2018 CATERPILLAR 725C2................From $309,500 (3) 2021-2022 CATERPILLAR 725..................From $550,000

2022 CATERPILLAR 740 GC....................................$CALL

2019 FORD F750................................................$95,000 (2) 2007-2015 FREIGHTLINER M2..................From $49,500 (19) 2018-2021 KENWORTH T370................From $89,500

(2) 2022 INTERNATIONAL HV607..........................$CALL (7) 2022 INTERNATIONAL MV607..............From $115,000 (20) 2018-2022 PETERBILT 348................From $149,500

Wheel Loaders

2019 CATERPILLAR 966M......................From $329,500

2020 CATERPILLAR 950M..............................$339,500

(2) 2018 CATERPILLAR 938M..................From $179,500

Miscelleneous Equipment

2022 ROME AG-12........................................$11,500

(3) 2018-2022 ROME TRCW12....................From $48,500

2019 ROME TACW16......................................$36,000

2018 ROME TCW28........................................$19,750

2018 ROME TCW32........................................$23,000

Authorized dealer for

new bearings, 6900 Hrs................ ......................................$250,000

2016 Tesab 1012, #S2427, 40" impactor, prescreen, 2000 Hrs...... ......................................$315,000

2017 Chieftain 2200 2D, #S2597, 5'x22' double box, 2900 Hrs........ ......................................$240,000

2014 Sandvik QE440, #U833, 5x20 scapler, 5200 Hrs................ $125,000

2004 Extec C12, #U842, 28x48 jaw, 9000 Hrs................$100,000

2018 Evoquip Cobra 230, #S2636. 36" impactor, compact footprint, 1500 Hrs........................$295,000

2020 M2100 rinser, #S2790, 5'x20' 3D wet or dry screen, 1900 Hrs................................$275,000

2019 Cedarapids CRS620S, #S2910, 6'x20' 3D horizontal, 500 Hrs..........................$270,000

Twenty Tips From Veteran ConExpo-Con/AGG Attendees

ConExpo-Con/AGG is already the largest trade show in North America, and in 2023 it’s going to be bigger and better than ever. That means it can be a little overwhelming if you’re attending for the first time.

To prepare for the show that is set to break records, AEM ask veteran attendees to share their best advice for first timers coming to the show. Below are 20 things everyone should know before you travel to Las Vegas, plus tips for maximizing your time once you arrive.

Have Plans

There is more than 2.7 million sq. ft. of equipment and technology to see and experts to network with. There is no way you will do everything you want to do by just coming across it as you walk.

Check out the exhibitor directory to see the more than 1,800 companies exhibiting and where they will be located at the show.

Book Hotel With Free Transportation to/From the Show

Many hotels on the Las Vegas Strip are designated pick-up and drop-off points for free shuttle transportation to and from the show. See the hotel shuttle route schedule on the ConExpo website for more info on the specific routes and pick-up/drop-off points of your hotel shuttle to plan how you will get to and from the show grounds.

Be aware that the route of your hotel shuttle drops you at a designated location at the show campus. Check ahead of which location your route will arrive at the show.

Understand Different Ways to Get to/From, Around the Show

There are many ways to get to and from the show, as well as even more ways to get around the 2.7 million sq. ft. of show. Getting to/from the show

• Hotel shuttles: Many hotels on the Las Vegas Strip are designated pick-up/drop-off points to get to/from the show. See the hotel shuttle route schedule on the ConExpo website for more info on the specific routes and pick-up/drop-off points of your hotel shuttle to plan how you will get to and from the show grounds. Be aware that the route of your hotel shuttle drops you at a designated located at the show campus. Check ahead of which location your route will arrive at the show.

• Ride-share and taxi services: There are designated pick-up/drop-off areas for rideshares and taxis. Be aware of these areas when you call for a ride-share. Please refer to the map on the ConExpo website for more info on where these spots are located.

• Monorail: The Las Vegas Monorail connects 3.5 miles of the Las Vegas Strip. There are several hotels that directly connect to the monorail but are also accessible for those not staying in those hotels: MGM Grand; Horseshoe; Flamingo; Caesar’s Palace; Harrah’s; The Linq. See the monorail map for more info.

The key stops that get you close to the

grounds with stops at: South Hall; Silver Lot; Diamond Lot

Look out for signage at these lots to be directed to the Tesla Loop.

• Monorail: The Las Vegas Monorail also can be used as a means to get from one side of the show grounds to another. There are three stops on the monorail’s route that can serve as pick-up/drop-off spots within the show grounds: Boingo Station at LVCC — Pick-up/drop-off in the Silver Lot; Closest stop to South Hall; Westgate Station — Pick-up/drop-off in Westgate; For registration + badge pick-up; SAHARA Station — Pick-up/drop-off in the SAHARA Hotel; Closest stop to the Festival Grounds

Please note that unless you specifically purchased a monorail pass during your registration, you must purchase a monorail pass at https://tix.lvmonorail.com/purchase.

Know When, Where to Pick Up Your Show Badge

Locations and times for show badge pick-

chair or motorized scooter to use at the show, we suggest reserving them prior to the show, which you can do by contacting ScootAround. Call 888/441-7575 or book online. These also can be rented at Blue Lot, Festival Grounds, and West Hall.

If You’re Bringing Children, Consider Bringing a Wagon Or Stroller

This may come as a surprise, but kids can be moody. It’s not a bad idea to bring a wagon or stroller for young kids.

Bring a Backpack

You will be picking up plenty of stuff and info. You’re going to want a place to keep it all.

Pack a Powerbank/External Battery Charger

Trust us, you’ll be using your phone to take plenty of photos and videos of the awesome equipment and innovations on display. Be sure to bring an additional phone charger so you’re not left disconnected.

Bring a Water Bottle

Hydrate, hydrate, hydrate! The Las Vegas heat can get wild, we recommend bringing a reusable bottle to keep you hydrated as you peruse the show.

Don’t Forget to Pack a Hat, Sunglasses, Sunscreen

show are as follows:

• Boingo Station at LVCC — Pickup/drop-off in the Silver Lot; Closest stop to South Hall

• Westgate Station — Pick-up/drop-off in Westgate; For registration + badge pick-up

• SAHARA Station — Pick-up/drop-off in the SAHARA Hotel; Closest stop to the Festival Grounds

Getting around the show grounds

• Express shuttles: There will be three routes of minibuses that will be continuously running throughout show hours connecting: Blue Lot to Festival Lot; Diamond Lot to Festival Lot; South Hall to Diamond Lot.

Transportation hubs will be set up at these three lots for pick-up & drop-off, as well as for answering any transportation questions.

• LVCC campus shuttle: Minibuses that offer a hop-on/hop-off service around the perimeter of the show grounds. These continuously running minibuses make stops at: South Hall; Grand Lobby; North Hall

• The LVCC Loop: The innovative underground transportation system provides rides in Tesla vehicles under the LVCC

up will be released closer to the show. Be sure you are pre-registered and have a valid photo I.D. to be able to pick up your badge.

Pack Comfortable Shoes

We cannot stress this one enough. There is a lot to see and so much walking involved, comfortable shoes are an essential for ConExpo-Con/AGG.

BONUS TIP: Make sure to break in those new shoes before wearing them to the show.

Reserve a Wheelchair or Electric Scooter If You’re Nervous About Walking

If you are interested in renting a wheel-

Again, plan for it to be hot and sunny in Las Vegas. Be prepared!

Leave Some Space in Your Luggage to Bring Things Back

Let us tell you, you will get so many freebies and swag! Plan to leave some extra space to bring them back home with you.

Visit New Manufacturers as Well

Don’t get hung up on just visiting “your manufacturers”. There are a ton of new technologies and companies to see as well!

Personalize Your Schedule

Organize your time at the show with My Show Planner. There’s no better place to keep track of education sessions you plan to attend, as well as booth appointments and products you’d like to see. Login and let My Show Planner be your personal assistant. see TIPS page 82

There is more than 2.7 million sq. ft. of equipment and technology to see and experts to network with. There is no way you will do everything you want to do by just coming across it.

Be aware that the route of your hotel shuttle drops you at a designated located at the show campus. Check ahead of which location your route will arrive at the show.

2018

2017 Volvo DD35B, 2,234 hours, 54" smooth double drum, vibratory, 4 cyl Kubota turbo, orops, 8.2k lbs, stk#CO227.................................................................... $29,500

1998 Caterpillar D6R XL, 6,839 hours, 10'8" semi-u blade w/ tilt, cab, very good u/c, diff steer, high track, 6 cyl Cat 3306 turbo, 175 hp, one owner, 45k lbs, stk#DZ965.... $97,500

2015 Kubota SVL90-2, 1,107 hours, 3k lb lift, cab w/ a/c, hydraulic coupler, 4 cyl Kubota, 92 hp, joystick controls, 11.3k lbs, stk#SK828........................................$47,500

2014 JLG 400S, 2,213 hours, 40 ft boom lift, 4x4, 8 ft basket, 4 cyl Deutz diesel, stk#AE428....................$29,500

2010 Yanmar SV100-1, 3,236 hours, 36" bucket, cab w/ a/c, hydraulic thumb, 8'4" blade, hydraulic coupler, 2 speed swing boom, 4 cyl Yanmar turbo, 77 hp, 22k lbs, stk#XC627.................................................................... $59,500

standard hoe, enclosed cab, 24" digging bucket, 2-stick backhoe controls, good rubber, stk#BH388..................................$19,900

2012 Caterpillar 316EL, 7,302 hours, 32" bucket, a/c, good u/c, pattern changer, 4 cyl Cat turbo, 40k lbs, stk#XC278.................................................................... $79,500

Kubota KX080-4, 2,396 hours, 30" bucket, cab w/ a/c, hydraulic thumb, manual coupler, 7'11" blade, swing boom, 4 cyl Kubota V3307 turbo, 65 hp, 19k lbs, stk#XC675.................................................................... $79,500

2014 Yanmar ViO35-6A, 3,904 hours, 18" bucket, cab, auxiliary hydraulics, hydraulic coupler, 68" blade, 2 speed travel, 3 cyl Yanmar, 8.25k lbs, stk#MX194 $34,500

1998 Caterpillar D6R XL, 16,074 hours, 10'8" semi-u blade w/ tilt, cab w/ a/c, diff steer, high track, 6 cyl Cat 3306 turbo, 175 hp, 45k lbs, stk#DZ896..............$49,500

2016 Sany SMG200, 2,225 hours, 14 ft mold board, scarifier, cab w/ a/c, 6 cyl Cummins turbo, 205 hp, stk#GR142.................................................................... $89,500

1998 Mack RD690S, 158,763 miles, 10 wheel, 14 ft steel body w/ 3 chutes, Mack EM7-275 hp, Mack 7 speed, camelback suspension, 14.4k f, 46k r, hitch, stk#TK494........ $34,500

2020 Bobcat T76, 797 hours, 2900 lb lift, cab w/ a/c, aux hyd w/ high flow, hyd coupler, 78" bucket, turbo, joystick controls, 10.25k lbs, stk#SK083......................$67,500

2004 Hyundai HL730-7, 1,729 hours, 2 yard, cab, 4 cyl Cummins turbo, 21.5k lbs, stk#LO014............$39,500

2013 Bomag BW177D-50, 2,243 hours, 66" smooth single drum, drum drive, vibratory, 4 cyl Cummins turbo, 73 hp, stk#CO118........................................................$47,500

2014 Skyjack SJ46AJ, 1,492 hours, 46 ft articulating boom lift, 4x4, 6 ft basket, jib, 3-phase on-board generator, 4 cyl Deutz diesel, stk#AE922................................$32,500

2007 Caterpillar 420E IT, 4x4, x-hoe, cab, front hyd coupler w/ 3rd valve, turbo, ride control, pilot controls w/ pattern changer, 17" digging bucket, rear auxiliary hydraulics, stk#BH680................................................$46,500

MOORE THAN

AL A A A CR DE

LER ANE

oc & w t Manito t g orld’ esent the w e e ting company in the t t

e t t iconic manuf t and some o vic ts and ser t ehensiv e

The most complete lif repr s larges the most compr e par f the mos actur

tr t s th America, , and work tributor ne e dis ov ompanies orld. The Lanco C e w Gr t ce supply chain in Nor ers in the indus y

New Rogers 50 Ton, Gentle Riser, No-Foot Neck, 24' deck, adjustable width bi-fold front ramps, 275's on aluminum outers, air lift 3rd, Night Lights, Strobes, Rogers and Black...... IN STOCK!

Rogers 35 Ton Gentle Riser, 24' deck, adjustable width bi-fold ramps, 275's on Aluminum, Extra lights and strobes, Red and Black......IN STOCK!

Rogers 55 No-Foot, 25' deck, Deep Well pocket, Reinforced wheelcovers, 275's on Aluminum, Air lift 3rd, Air lift flip 4th, Night Lights, Strobes, Red Paint.... IN STOCK!

Rogers TAG21XL 22' + 6' tail, 235's on Aluminum, Air Ramps, Safety Lighting Pkg. with Strobes. Black or Red Paint........IN STOCK!

New Rogers 55 ton, CobraNeck, 2-position pin, Ratchet Ride Height, 26' deck, 18" ride height, deep well pocket, 275's on aluminum outers, air lift 3rd,& 4th. Night Light Pkg., Strobes..IN STOCK!

2005 Rogers 55 Ton Dropside, No-Foot Heavy Lift Pkg. 26’ deck, Air Ride, Air Lift 3rd, outriggers.... IN STOCK $55,900

Rogers 40 Ton No-Foot, 24' deck, adjustable width bifold ramps, Bucket cut-out, 275's, Aluminum outers, Night Lights, Strobes, Rogers Black......IN STOCK!

Rogers TAG25XXL, 25 Ton Capacity, Premium Specs, Superior Quality, 235’s Aluminum, 7-Year Warranty, Black or Red Paint, 22' and 24' deck, 8’ Air Ramps.. IN STOCK!

2022 MANITOWOC MLC300 S/N: 3001135, 330 ton Capacity, VPC Max & Wide Boom Available Immediately, Series III CTW, Self-Erecting, Maxer Prepped, Cold Weather Package, 60” Crawler Pads, APU Prepped, Drum 2 Prepped, 276’ Number 500 Boom, Upper Boom Point......Price On Request

2017 GROVE GRT650 Hours: 1,931, Stk# 1665, S/N: 235986, 164 HP, 4 Wheel Drive, 50 Ton Capacity, Enclosed ROPS, 35 Ton 4-Sheave Quick-Reeve Hook Block, 34’-114’ Four-Section Full-Power Boom, 26’-45’ Off-Settable Telescoping SwingAway Jib, 2 Hoists, Cummins QSB6.7L Engine........$409,000

2015 MANITOWOC 11000-1 Hours: 5,430, Stk# 22347, S/N: 11001156, 110 Ton Cap., Hino J08e-Uv Tier 4 Engine, Hyd Over Hyd Controls, 150ft Heavy-Lift Boom, 3rd Drum, 50 Ton Block, 5-Piece CW, Cab w/ Safety Glass......$495,000

RT540E RT765E-2 RT880E RT890E GRT650 GRT650L GRT880 GRT8090 GRT8100

Weekly Special!

2022 MCCLOSKEY 516RE,  CAT engine, Hydraulic Tipping grid ready, 5 Hours................................$Call

2022 MCCLOSKEY 512A,  CAT engine, 5 hours...... $Call

2022 MCCLOSKEY R155,  CAT motor, 5 Hrs $Call2022 MCCLOSKEY 516REG,  CAT engine with Hydraulic Tipping grid........................................$Call

2022 MCCLOSKEY ST80T, Tracking Conveyor, CAT engine..........................................................$Call

2016 MCCLOSKEY I44RV3, Closed Circuit Impact Crusher. CAT C.9. In mint condition, fully serviced and field ready....................................................................................................... $Call

2015 MCCLOSKEY R155, 2,800 Hrs, 3-way Scalping Screen, Finger Decks on the top. In Excellent Condition............................................................$Call

2021 MCCLOSKEY S190 3D, the most advanced and innovative 20’ x 5’ mobile Screener..............$Call

2021 MCCLOSKEY ST80, Road Towable, Wheel Radial Stacker, Tier 4 CAT engine......................$Call

2018 KOMPTECH NEMUS 2700, In excellent condition with 2575 Hrs......................................$Call

POWERSCREEN POWERTRACK, S/N: 7214046, Double Deck Scalper.....................................$59,000

2016 SANDVIK QA441, 20x5 Double Deck, Double Box, 3-way Split, CAT eng 4.4Hp. New Belts.$149,000 TEREX PEGSON 1300 AUTOMAX, MOBILE CONE CRUSHER, w/ 3-axle Carrier................................$Call

EXTEC ROBOTRAC, S/N: 5054, In good running order with low hours............................................$Call

2021 MCCLOSKEY R155, 510 hours, Nice!....$Call

2005 MCCLOSKEY 728RE, radial fines conveyor and oversize conveyor, Being totally refurbished $Call

2010 MCCLOSKEY 621RE, CAT engine, 2329 Hours..................................................................$Call

JD 1050K, 3 Shank Ripper, 156” Semi U, Warranty, #249082..................$429,000

JD 950K, A/C, Trimble Ready, LGP 36” Shoes, PAT 184” Blade, #250252......$549,000

JD 350GLC, Cab, A/C, Genesis GXT665R Shear, Rev. Fan, #233698..................$349,000

JD 644K, Cab, A/C, Rollout Bucket, Ride Control, Scale, #249478..................$169,500

BOMAG BW211PD-50, Cab, A/C, Padfoot, 84” Single Drum Roller, #249982........$79,500

BOMAG BW177, OROPS, 66” Smooth Drum Roller, #250889....................$74,000

NPK Hammers, All Sizes for All Makes. Inspected and Well Maintained, GH4 –GH18

JD 750K, LGP, 34” Pads, 156” PAT, #261535................ ................................$149,000

JD 250G, A/C, 9’9” Arm, 28” Shoes, Warranty, #249661.... $189,000

JD 850K, A/C, Winch, LGP, 36” Pads, 6 Way 168” Blade, #251197..................$169,000

JD 672G, Air, 14’ Blade, #241218..................$159,000 Bomag BW211D-50, 84” Smooth Drum, #251655.. ..................................$88,000

JD 380GLC, A/C, 72’ Long Front, 32” Shoes, Warranty, #248585..................$279,000

CAT 963C, Cab, A/C, GP Bkt, V Pattern, Joystick Loader, #241742....................$67,500

JD 770G, Cab, A/C, 14’ M.B., 14.00 Tires, #247935............

JD 310SJ, Cab, A/C, 4X4, Ext Hoe, 2 Lever, #247469..........

JD 290GLC, A/C, Coupler, 10’2” Arm, 32” Shoes, New Reman Engine, #250559........

JD 450K, LT, Ripper, 105” PAT, #261171..........$139,000

JD 670B, Cab, A/C, 12’ M.B., Radio, Front Lift Group, #261582....................$56,000

JD 755K, Joystick Loader, Pedal Steer, #244716............

2022

Takeuchi TB257FR, 315 hours,

12,645 lbs $55,750

2014 Volvo SD115, 1,522 hours, OROPS, 84" smooth, drum drive,

6,360 lbs $42,980 2022 New Holland C327, 240 hours,

2018 Takeuchi TL12V2, 2,005 hours, A/C, 84" bkt, hyd. coupler, 111 hp, 13,190 lbs $67,500

2019 Takeuchi TL12V2, 1,130 hours, A/C, 84" bkt, hyd. coupler, 111 hp, 13,190 lbs $72,880

2014 Takeuchi TB153FR, 3,575 hours, A/C, Wain Roy cplr, 39 hp Yanmar, 12,685 lbs $35,750

2021 Takeuchi TB370, 375 hours, Rubber pads, hyd. thumb, hyd cplr, 14,850 lbs $89,220

2022 Link-Belt 80X3, 645 hours, Rubber pads, hyd cplr, blade, 18,900 lbs $93,800

2021 Link-Belt 160X4, 485 hours, Geith cplr, MF hyd, 20' dig depth, 38,400 lbs $155,000

2022 Link-Belt 210X4, 535 hours, Geith cplr, MF hyd, 22' dig depth, 49,000 lbs $193,400

2021 Link-Belt 250X4 LF, 1,200 hours, 60' reach, 48' dig depth, 177 hp, 63,600 lbs $201,600

Volvo CE Presents Solutions for Changing Industry

Volvo Construction Equipment (Volvo CE) is building a one-of-a-kind booth experience at the ConExpo-Con/AGG 2023 tradeshow to help customers and other attendees be ready for an ever-changing business environment.

With a theme of “Change Starts Here. Be Ready For It,” the 55,000 sq.-ft. Volvo booth, F8926 in the Festival Grounds, will feature the company’s newest and most popular products, cutting-edge services and technology in a dedicated Solutions Hall, two areas where attendees can test drive electric excavators and wheel loaders, construction industry influencers like the “Gold Rush” cast, and more.

“We are committed to being a fossil free company by 2040, But words will not reach targets. Only moving from words to action will,” said Melker Jernberg, president of Volvo CE.

“There is no time to waste and that’s why we say ‘Change Starts Here’ because as we are demonstrating technology is developing fast and that’s where ‘Be Ready for It’ comes in. At ConExpo we want to help our customers be prepared for the change by showcasing our wide range of commercially available electric machines packaged with related charging infrastructure and other sustainable power alternatives.”

In addition to two large operating arenas in the booth for electric machines, Volvo CE also will showcase its electric lineup expansion with the 23-ton EC230 Electric mid-size excavator and DD25 Electric asphalt compactor, which was introduced at the Volvo pre-ConExpo press conference.

But a view into the future of the construction industry doesn’t stop with electric. Volvo CE also will display autonomous concepts, the world’s first hydrogen fuel cell articulated hauler, a remote-controlled unit and much more as the company works to help more customers reach their own efficiency and carbon reduction goals.

Also in the Volvo booth, F8926, will be the company’s

next series of excavators, with a model unveiled the morning the show opens, and the upgraded L350 wheel loader. Triedand-true Volvo excavators, wheel loaders, haulers and other products also will be on display with product experts ready to answer attendees’ questions.

Other Volvo Group companies also will be in the booth, including a truck from Volvo Trucks, engines from Volvo Penta and representatives from Volvo Financial Services.

More Than Iron

Inside the Solutions Hall, attendees will be able to speak to experts about services and technology that can be tailored to the way they do business to grow now and well into the future. Solution offerings include:

• Site solutions that give customers tailored recommendations for their fleet — regardless of brand — to optimize site

setup and reduce the risk of accidents.

• Business solutions to help customers streamline transactions, better control costs and maximize their uptime potential so they can stay focused on their core business.

• Financial solutions including valuable bundles and unique offers that help customers better manage cash flow during seasonal slowdowns.

• ActiveCare Direct, Volvo’s one-of-a-kind telematics machine monitoring and reporting service, that provides proactive fleet intelligence to save customers time and money on diagnosing machine issues.

Attendees also can meet members of Discovery Channel’s “Gold Rush” cast Tuesday through Friday in the Volvo booth, as well as other popular construction industry influencers during a meet-and-greet Wednesday afternoon.

They also can get an up-close look at a real FIA World Rallycross electric race car. As the official track building partner of the FIA World Rallycross Championship, Volvo CE continues to drive industry transformation toward sustainable power both on and off the track.

For those unable to attend ConExpo 2023 in person or who want exclusive content, Volvo CE also is hosting a virtual experience that brings the show to homes and offices around the world. Those interested in watching new product launches, experiencing machine walkarounds, interacting with Volvo experts and more can register now for this exclusive online event to be a part of the show.

“Whether someone joins us in Las Vegas or virtually, we have a great show planned for them with a mix of machines and services, hands-on opportunities and educational sessions — and I’m confident it will be both enlightening and fun,” said Stephen Roy, president, Region North America at Volvo CE. 

JCB’s Hydrogen Technology Set for International Debut

JCB is set to showcase its super-efficient hydrogen combustion technology on the international stage for the first time ever with a debut in North America.

The wraps will come off JCB’s brand new hydrogen combustion engine — the company’s zero-carbon emissions solution for construction and agricultural equipment—at the ConExpo 2023 show in Las Vegas as part of the International Fluid Power Exposition (IFPE) at Booth S83751 in South Hall 3.

JCB Chairman Lord Bamford is leading the project to develop JCB’s hydrogen technology.

“The JCB engineering team has made enormous strides in a short space of time to develop a hydrogen internal combustion engine and it already powers a JCB prototype backhoe loader and a Loadall telescopic hander. As the first construction equipment company to develop a fully working combustion engine fueled by hydrogen, I’m delighted we are now able to present this technology on the international stage,” Bamford said.

Leading the way in environmental, social

and governance (ESG) for the construction equipment sector, JCB has been responsible for a series of industry innovations on its “Road to Zero.”

JCB developed the world’s first batteryelectric mini excavator and has been at the forefront of electric technology development to meet customers’ demands for zero-carbon products with its E-TECH range. Today, JCB has the largest electric line-up available in the construction industry and the company’s expertise in this sector also will be on show at the exhibition.

JCB’s commitment to reducing emissions goes back almost 25 years and its latest diesel engines have already delivered a 97 percent reduction in NOx emissions since 1999 and a 98 percent reduction in particulates. Today, JCB’s diesel-powered machines also emit 50 percent less CO2 compared with those manufactured in 2010. JCB’s clean diesel engine technology also will be showcased on the stand in Las Vegas. For more information, visit www.jcb.com. 

JCB Chairman Lord Bamford is leading the project to develop JCB’s hydrogen technology.

Attendees will have the opportunity to test drive compact electric models, plus discover all-new customized services to intelligently grow their businesses.

YOUR PARTNERS

OVERVIEW

American Bin and Conveyor and Phoenix Manufacturing design and build material handling equipment and systems. From a single conveyor to a complete processing plant, we are your one-stop shop for equipment, engineering, and fabrication services.

MATERIAL HANDLING EQUIPMENT

• Belt Conveyors

• Stackers

• Bucket Elevators

• Tanks & Sumps

• Belt Feeders

• Bins & Hoppers

• Screen & Crusher Towers

FABRICATION SERVICES

• 130,000 FT 2 Manufacturing Facility

• CNC Equipment

• 12,000 FT 2 Steel Shot Blast

• 15,000 FT 2 Paint Booths

SYSTEM DESIGNS

• New Plant Engineering

• Plant Rebuilds

• Complete Design, Build, and Install Capability

• Screen & Crusher Upgrades

We are the Manufacturers, i

Whenyoufindyourselfw

n business since 1926 withhavingtomove

When you find yourself with having to move more water or sewage than you have ever moved in your life.....call us!

Single Pump capacities exceeding 100,000 GPM

o We’ve completed over 100,000 proj jects and counting.........”

If yo oproj j u have one of those jects,giveusacallat:

ects, give us a call at: 772-770-0004 or visit us at Booth C32809 at CONEXPO 2023

e W v T Thhe Power to Move Waater® Since 1926 | mwipumps.com| info@mwipumps.com

Cummins motor, Rear camera, Heat/AC, 26.5 R25 tires 65% or better $139,000

2018 Deere 210G LC, 4000 hours, 36” bucket, QC, Hyd. Thumb, Aux hydraulics, Long undercarriage, Heat/AC, Clean Cab, Work ready $164,500

2016 Volvo ECR350EL, 5600 Hours, Aux. Plumbing, 12' stick, 65" bucket $114,500

2020 Hitachi ZX135US-6, 1600 Hours, Aux. Hydraulics, QC, 24" Digging Bucket, Dozer Blade, Heat/AC, Work Ready $124,500

HITACHI

EXCAVATORS

2023 ZX345USLC-6, NEW $CALL

- CAB W/ HEAT & AC, 2 WAY PATTERN CHANGER, STD

ARM 12’4”, AUX HYDRAULICS, ISUZU ENGINE 249 HP,

79,146 LBS OPERATING WEIGHT.

2023 ZX225USLC-6, 1245 HRS

$169,000

- HINO 160 HP ENGINE, CAB W AC & HEAT, TIER 4, STD BOOM/ARM, 22’ MAX DIG, 31’11” MAX REACH, 10’5”

TRANSPORT WIDTH.

KOBELCO

2022 SK170LC-11, 2 NEW UNITS $CALL

- 134HP YANMAR ENGINE, CAB WITH HEAT AND AC, EAGLE EYE CAMERA SYSTEM, BOOM 17’1”, ARM 10’2”, TRACK 23.6”, OPTIONAL CWT-8288 LBS

2022 SK210-11, 5 UNITS $CALL

- HINO 160 HP ENGINE, CAB W AC & HEAT, TIER 4, STD BOOM/ARM, 22’ MAX DIG, 31’11” MAX REACH, 10’5” TRANSPORT WIDTH.

2022 SK140RLC, 2 UNITS $CALL

- CAB WITH HEAT AND A/C, EAGLE EYE CAMERA, AIR SUSPENSION SEAT,TRACK WIDTH 23.6”,STANDARD MONO BOOM 15’4”,STANDARD ARM 9’4”.

KOMATSU

2014 PC290LC-10, 4002 HRS $169,000

- 213HP ENGINE, EROPS CAB W A/C, 24” SHOES, 22.7’ DIG DEPTH, 34.3’ MAX REACH, OPERATING WEIGHT: 67400 LBS.

LINKBELT

2023 145X4DZ, 7 UNITS $CALL

- 102 HP ISUZU ENGINE, STICK: 9’11”, AUX HYDRAULICS, TRACK: 23.6”, MAX DIG: 19’2”, MAX REACH: 28’3”, OPERATING WEIGHT: 33,600 LBS.

2023 160X4, 2 UNITS $CALL

- 112hp ISUZU AR-4JJ1X FINAL TIER 4 TURBO-CHARGED, CAB HEAT/AC, STICK LENGTH 10’, STEEL TRACKS 23.6”, DIG DEPTH 21’ 4.

2022/2016 80X3, 2 UNITS ..........................18 HRS - $CALL

................................................................2128 HRS - $76,500

- EROPS W/ HEAT & AC, 54HP ENGINE, 7’2” ARM, 11’6” BOOM, MULTI HYDRAULICS, TRANSPORT WIDTH: 7’7”, OP. WEIGHT: 18,900.

2023 350X4, 159 HRS $CALL

- ISUZU 268 HP ENGINE, TIER 4F, 10’8” STICK, 24’1” MAX DIG, 36’ MAX REACH, 11’2” TRANSPORT WIDTH.

SANY

2022 SY155U, 283 HRS $CALL

- 105 HP ENGINE, CAB W/ HEAT & AC, AUX HYDRAULICS, SHORT RADIUS, 8’2” STICK, 17’11” DIG DEPTH, 27’4” MAX REACH, 24’ SHOES.

2022 SY95C, 3 NEW UNITS $CALL

- YANMAR 71 HP ENGINE, TIER 4F, CAB W AC & HEAT, 6’7” STICK, 14’2” MAX DIG, 20’7” MAX REACH, 7’5” WIDTH, 18” SHOES.

2022/2021 SY225C, 5 UNITS 121 HRS - 611 HRS - $CALL

- CUMMINS 164 HP ENGINE, 31” SHOES, CAB EROPS

HEAT/AC, 9’7” ARM, 18’8” BOOM, 11’1” TRANSPORT WIDTH, 54,000 LB OPERATING WEIGHT.

2022-2017 SY215, 9 UNITS ............ 42 - 753 HRS - $CALL

- CUMMINS 164 HP ENGINE, TIER 4F, CAB W AC & HEAT, 31” SHOES, 9’7” STICK, 21’8” MAX DIG, 33’10” MAX REACH, 10’5” WIDTH.

2022/2021 SY265CLR, 4 UNITS .... 7 - 515 HRS - $205,000

- CUMMINS 190 HP ENGINE, TIER 4F, CAB W AC & HEAT, 43’8” MAX DIG, 57’9” MAX REACH, 11’1” TRANSPORT WIDTH, 69,500 OP WEIGHT.

2021 SY135, 5 UNITS .................... 116 - 461 HRS - $CALL

- ISUZU 103 HP ENGINE, TIER 4F, CAB W AC & HEAT, 8’2” STICK, 18’1” MAX DIG, 27’2” MAX REACH, 8’6” TRANSPORT WIDTH, AUX HYDRAULICS.

MINI EXCAVATORS

BACKHOES

HITACHI

2022 ZX26U-5N, 3 NEW UNITS $CALL

- CANOPY, STANDARD ARM 3’10”, RUBBER TRACKS, AUX HYDRAULICS, YANMAR 3TNV80F- ENGINE W/ 20 HP, BLADE, 5556 LBS OP. WEIGHT.

KOBELCO

2022 SK35SR-6E, 232 HRS $CALL

- YANMAR 23 HP ENGINE, TIER 4F, AUX HYDRAULICS, COUPLER, 7’11” MAX DIG, 17’7” MAX REACH, 5’7” WIDTH.

SANY

2022/2021 SY35U, 20 UNITS ........ 0 - 130 HRS - $45,400+

- YANMAR 24.4 HP ENGINE, TIER 4F, 4’7” STICK, AUX HYDRAULICS, 24” BUCKET, 10’2” MAX DIG, 5’8” TRANSPORT WIDTH.

2022 SY16, 4 UNITS ...................... 1 HR - 66 HRS - $CALL

- YANMAR 15HP ENGINE, OROPS CAB, 3’8” STICK, 5’11”

BOOM, 7’9” MAX DIG DEPTH, 13’1” MAX REACH AT GL.

2022 SY80U, 3 UNITS ..................2 HRS - 38 HRS - $CALL

- 73HP YANMAR, STICK: 6’ 9”, CAB W HEAT AND A/C, AUX

HYDRAULICS, 18” RUBBER TRACKS, AX DIG DEPTH: 14’ 10”, TRANSPORT WIDTH: 7’ 3”.

2022/2021 SY50U, 3 UNITS ..27 HRS - 124 HRS - $59,000+

- 39HP TIER 4 FINAL YANMAR 4THV88C DIESEL, 11,684LB

OP. WEIGHT, 11’ 3” DIG DEPTH, 6’ 5” TRANSPORT WIDTH, 16” RUBBER TRACKS.

2022/2021 SY26U, 7 UNITS ......0 HRS - 88 HRS - $35,000+

- 20.4HP ENGINE, STICK: 4’ 3”, OROPS, 12” RUBBER

TRACKS, AUX HYDRAULICS, DIG DEPTH: 9’ 3”, OP.

WEIGHT: 6,085LBS, TRANSPORT WIDTH: 5’ 1”

2022/2021 SY60, 10 UNITS $CALL

- YANMAR 57 HP ENGINE, TIER 4F, 5’7” STICK, AUX

HYDRAULICS, 13’ MAX DIG, 20’9” MAX REACH, 6’7”

TRANSPORT WIDTH.

CATERPILLAR

2019 440 TRACTOR, 420 HRS

$165,000

- CAT ENGINE, EROPS HEAT/AC, RIDE CONTROL, EXTENDAHOE, AUX HYDRUALICS, REAR QC, 24” REAR DIGGING BUCKET.

DOZERS

2022/2021 ZW180-6, 5 UNITS 17 HRS - 1260 HRS - $189,000+ - 3.4 GP BKT W/EDGE, ENGINE 168 HP, LIMITED SLIP FRONT/REAR, 3RD VALVE, RIDE CONTROL, REAR CAM, COUNTERWEIGHT.

2022 ZW100-6, 3 UNITS $CALL - STANDARD TIRES, HYDRAULIC COUPLER 416 TYPE, GENERAL PURPOSE 1.3 CU YD BUCKET, BELLYGUARD, FRONT CHASSIS, HEATED MIRRORS.

2022-2014 ZW220-6, 3 UNITS $CALL

CATERPILLAR

2012 D6N XL, 4461 HRS

$165,000

- 145HP ENGINE, EROPS CAB W AC AND HEAT, 24” SHOES, 36,610 LB OPERATING WEIGHT, BLADE WIDTH 10.8ft in.

KOMATSU

2017 D37-24PK, 2185 HRS

$108,000

KOMATSU 91HP ENGINE, TIER 4F, CAB EROPS, 24” SHOES, OPERATING WEIGHT: 20,503 LBS

2021 D51PX-24, 409 HRS

$214,500

- KOMATSU 133HP EPA TIER 4 FINAL,CAB WITH AC,6 WAY BLADE,TRACK WIDTH: 28”,OPERATING WEIGHT: 31 438 LBS,TRANSPORT WIDTH: 8’ 6”.

WHEEL LOADERS

- CUMMINS 200 HP ENGINE, TIER 4F, CAB EROPS W AC & HEAT, 3RD VALVE HYDRAULICS, JRB QC, 108” TRANSPORT WIDTH.

2018 ZW150, 727 HRS $117,500

- CUMMINS 145 HP DIESEL ENGINE, TIER 4F, EROPS CAB A/C, 20.5 R25 (L-3) TIRES, RIDE CONTROL, 27,000LB OP WEIGHT.

SKID LOADERS

CASE

1998 CASE W24C LOADER $CALL

- 158HP ENGINE, EROPS CAB, 4 SPEED POWER SHIFT, 2,44M TRANSPORT WIDTH, 23,500LBS OPERATING WEIGHT.

CATERPILLAR

2021 950GC, 2 UNITS $CALL

- CAT 7.1 DIESEL ENGINE, EROPS W/ AC & HEAT, BACK UP CAMERA, RIDE CONTROL, COUPLER READY, 4.25 YD

BUCKET, 23.5 R25 TIRES

2020 930M, 4187 HRS $CALL

- CAT DIESEL ENGINE, EROPS WITH HEAT & AC, FUSION QUICK COUPLER, GP BUCKET, 20.5R25 RUBBER TIRES.

2019 926M, 4216 HRS $CALL

- CAB W/ HEAT & A/C, CAT DIESEL ENGINE, DELUXE CAB, HYDRAULIC COUPLER, 3.5 YD QC BUCKET, 20.5R25 TIRES

KAWASAKI

CATERPILLAR

2019 289D $CALL

- CAT C3.3B DIT, CAB EROPS AC&HEAT, HIGH FLOW AUX HYDRAULICS, 2 SPEED, ELECTRONIC COUPLER, RUBBER TRACKS, 10,533 LB OP. WEIGHT.

GEHL

2022 RT215, 130 HRS $CALL

- YANMAR 72 HP, TIER 4, CAB W HEAT & AC, 17.7” RUBBER TRACKS, 74”, 16.1 CUFT HD BUCKET, OP WEIGHT:

9,900 LBS, TRANSPORT WIDTH: 69.5”.

2021 RT255, 504 HRS $79,000

- 74HP, TIER 4, CAB W HEAT & AC, HIGH HYDRAULICS, 17.7” TRACKS, 84”, 18.4 CUFT BUCKET, OP. WEIGHT:

11,600 LBS, TIPPING LOAD: 7,286 LBS.

2020 V270, 2 UNITS .............. 156 HRS/390 HRS - $59,000

- CAB WITH HEATING & A/C, JOYSTICK W/ HYDRAULIC SELF-LEVELING, TWO SPEED, REAR CAMERA, BUCKET 74” CUTTING EDGE, AUX HYDRAULICS.

MANITOU

2021 2700V, 42 HRS $CALL

- YANMAR, CAB W HEAT AND A/C, TIRES, HIGH FLOW, UNIVERSAL COUPLER, 2 SPD, OP WEIGHT 8,150LBS, TRANSPORT WIDTH 70”.

2022 SY75, 2 UNITS

$CALL - 57.7HP Isuzu CP-4LE2XA3C-01,CAB HEAT & A/C,STICK

LENGTH 6’9,HYDRAULICS 39.4 GPM,RUBBER TRACKS

18”,BACKFILL BLADE

YANMAR

2022 SV40 EXCAVATOR, 131 HRS $CALL

- 39 HP YANMAR ENGINE, 0ROPS- HEAT & AC, STICK:

5’3”, HYDRAULICS, 14” RUBBER TRACKS, DIG DEPTH: 11’10”, OP. WEIGHT: 9,206 LBS.

2022 SV100-2A, 3 HRS

$CALL

- 72 HP YANMAR ENGINE, EROPS WITH HEAT/AC, STICK:

13’2”, RUBBER TRACKS, DIG DEPTH: 15’9”, MAX REACH:

25’4”, OP. WEIGHT: 21,550.

2022 SV08-1D, 14 HRS

$CALL

- 10.3 HP ENGINE, WATER-COOLED 2-CYLINDER DIESEL, OROPS, STICK: 3’10”, HYDRAULICS: 5.2 GPM, RUBBER

TRACKS: 7”, BACKFILL BLADE.

2012 90Z7, 19,087 HRS $CALL

- 295HP ENGINE, RIDE CONTROL, BELLY GUARD KIT, COUNTERWEIGHT, 5.5 CU. YD. GP BKT, 26.5X25 RADIAL L3 TIRES, AXLE COOLING KIT.

HITACHI

2022/2021 ZW80-5B, 6 UNITS ..2 HRS - 70 HRS - $83,500+ - DEUTZ 63 HP ENGINE, TIER 4F, CAB EROPS AC & HEAT, 3RD VALVE HYDRAULICS, 6.3’ TRANSPORT WIDTH, RADIO.

AUTHORIZED DEALERS

2021 2550RT, 490 HRS $CALL

- 74.3HP DEUTZ 3.6L TIER 4F, CAB WITH HEAT AND A/C, AIR RIDE SEAT, HIGH FLOW, 17.7” 4 SEASON TRACKS, UNIVERSAL QC, 84” HD BUCKET.

TAKEUCHI

2022/2021 TL12R2 CR/TL12V2, 11 UNITS $CALL

- KUBOTA 111 HP, ENCLOSED CAB, HYDRAULICS, 17.7 “ TRACKS, OPERATING WEIGHT: 13,190 LBS,TRANSPORTATION WIDTH: 6’ 5”

2021 KOBELCO SK300LC-10 EXCAVATOR

2021 SANY SY215LC EXCAVATOR

2020 CATERPILLAR 320GC HOURS: 2950

2015 CATERPILLAR 323FL HOURS: 4122

From Road Show to Expo

AEM Readies to Chart New Records, Unveil New Technologies at ConExpo-Con/AGG 2023

By Lucy Perry CEG CORRESPONDENT

In December 2022, organizers announced the ConExpoCon/AGG trade show had sold all available exhibit space for 2023. After the coronavirus pandemic forced the 2020 show to close a day early, event organizers at the Associated Equipment Manufacturers (AEM) expect this year’s show, set for March 14 to 18, 2023, to be the biggest in ConExpo’s 100-plus year history.

The Road Show, which first opened in 1909, was a processor of today’s largest construction trade show in North America.

In a SANY America historical perspective, it was described it as “a simple event held at a fairground in Columbus, Ohio.”

The National Stone, Sand & Gravel Association said this first show began as a road show with 40 exhibitors showing off new equipment that “could do the work of 15 horsedrawn units.”

Total square footage of the early event was the equivalent of a single exhibitor’s space in Las Vegas these days, but it drew thousands.

Today’s shows draw more than 130,000 attendees from around the world who gather every three years.

Back then, event organizers were proud to host thousands of potential equipment buyers. Construction historians at AEM say some 40 different equipment manufacturers showcased their newest models and technology at that first gathering.

“It was one of the most remarkable and exciting displays of equipment to come to prominence in the West,” said the

association.

As it grew in interest, the Road Show was held every year or so until it was put on hold during World War II.

After WWII, the show was renamed the Construction Equipment Exposition and Road Show.

The “ConExpo” moniker was dubbed in 1969; the first ConExpo standalone show as held in 1993.

The Concrete and Aggregates Show convened for the first time in 1928 to highlight concrete and aggregates in road

building and construction applications.

The first show was held in Detroit in 1928, and like ConExpo, continued to grow and evolve.

Con/AGG became “a major event with the boom in construction that followed World War II,” reports SANY America.

Con/AGG held its first independent event in 1994, drawing just as impressive a following as ConExpo.

see CONEXPO page 12

From humble beginnings as the Road Show held in an area the equivalent of one manufacturer’s exhibit space today, ConExpo-Con/AGG launched into the largest construction trade show in North America.

In 2023, getting around to see equipment will be a breeze shuttling between exhibit halls in Tesla vehicles in a free underground transportation system.

New 300|AT Reimagines All-Terrain Platform at Link-Belt

Link-Belt Cranes has announced its allnew 300-ton 300|AT all-terrain crane will debut at ConExpo-Con/AGG ‘23 in Las Vegas (March 14 to 18, 2023).

Following valuable voice of the customer data collection as well as engineering and manufacturing research, Link-Belt Cranes is debuting an entirely new crane platform with the 300|AT.

“We spoke extensively with our customer base and feel like we have delivered. They want a crane that travels down the road efficiently, goes together on a job site quickly, has a strong chart, and is reliable,” said Andrew Soper, product manager telescopic truck and all-terrain cranes.

The 300|AT is a five axle all-terrain crane built with transportability in mind meeting all North American transportation requirements. Its single engine platform is HVO fuel ready and EPA On-Highway and CARB On-Road compliant.

“This crane represents Link-Belt’s longterm AT investment, which goes back to 2009 with construction of our own formed boom bay and subsequent ATC-3275 introduction,” said Soper.

Lifting

The 300|AT is well equipped with a seven section 46 to 238 ft. pin and latch greaseless formed boom and optional two-piece 42 to 71

ft. on-board hydraulically offset fly and two 25 ft. lattice extensions. Maximum attachment will achieve a tip height of 369 ft. and an efficient modular counterweight configuration adds to the 300|AT’s versatility.

Maximum counterweight is 162,000 lbs. with four overflow truckloads, and for improved mobility and efficiency for a variety of jobsite scenarios the 300|AT can be set up with two overflow loads and 74,000 lbs. of counterweight.

Another improvement to the 300|AT’s mobility is the option of transporting the 300|AT with its upper 8,000 lbs. counterweight tray and still stay below 160,000 lbs. gross vehicle weight [23,000 lbs. per axle].

The 8 ft. heavy lift fly provides robust capacities and line separation for two load line operation in applications like precast wall panels. Time tested and proven features such as greaseless sheaves and Teflon wear pads cut maintenance and service costs. Additional standard boom features include wireless wind speed indicator, single-hand operation rope guard, and three work lights on the boom base section.

The 300|AT also will feature SmartFly. Link-Belt’s simple, intuitive SmartFly system ensures proper fly erection and stowage sequence while minimizing work at height. Link-Belt fly erection procedures have been embraced in the market on most all of Link-

Belt’s telescopic product line for their ease of assembly and one person operation, according to the manufacturer.

Features

A single 554 hp Cummins X15 diesel engine with ZF Traxon automated manual transmission delivers best-in-class power on the 300|AT. The transmission features improved shifting performance and offers integrated intarder braking with paddle shift controls for easy stop-and-go at highway speeds. The 300|AT also features an innovative new power transmission system for efficiently powering upper hydraulic functions. It offers a 24 volt electrical system with an optimized, modern CANBUS communications.

Customers will recognize the purpose-built two-person carrier cab from the 175|AT on the new 300|AT. The interior features amenities such as automatic climate control, blue tooth radio, cell phone charging and LED lighting. An air ride seat with lumbar support provides optimum comfort while driving.

Operator’s Cab

The operator’s cab is a legacy success story, tailored for all-terrain operations. Pulse 2.0 with its 10 in. touch display is at the heart of this crane with features and controls that are intuitive, adaptable and in easy arm’s reach. The view from the seat is unimpeded in any kind of weather with large sweeping

wipers in the front and top, and strategicallyplaced vents for quick defrost.

Another new feature to Link-Belt’s all-terrain lineup is the improved flexibility of VCALC, an infinitely variable outrigger positioning that allows for setup in tight jobsite conditions where outriggers require being unevenly extended (0, 40, 70 and 100 percent extension). All capacities are printed in crane rating manual and automatic swing function kick-out works to maintain forward and backward stability.

Standard carrier features that operators are accustomed to include: four points of access to the flat carrier deck, a comprehensive camera “Site Vision” package, and the premiere lighting package on the market for nighttime operations.

Other standout features of the 300|AT include:

• Wireless rigging remote (carrier function, upper function, fly erection)

• Tire pressure and temperature monitoring system

• SmartStack counterweight detection system

• Tie offs at all dedicated anchor points for multiple work positions

• Flat carrier deck

For more information, visit www.linkbelt.com. 

The 300|AT is well equipped with a seven section 46 to 238 ft. pin and latch greaseless formed boom and ptional two-piece 42 to 71 ft. on-board hydraulically offset fly and two 25 ft. lattice extensions.

Construction & Industrial Equipment is the Diamond Z distributor for the Northeast. We have been representing Diamond Z products for 30 years.

Contact Jack Moninger or Brian at (201) 845-6800

255 Margaret King Avenue • Ringwood, NJ 07456

DZT 8000 TKT

The DZT 8000 TKT Series track mounted tub grinder has all the features and capabilities of the DZT 8000 with the added portability that comes with a track mounted machine, allowing operation just about anywhere. The DZT 8000 TKT comes with complete transport system that easily and safely secures to the grinder so it is ready to be transported.

As a pioneer in the wood grinding industry, Diamond Z has established a global reputation for manufacturing the highest quality, most durable, easy to service, and most productive industrial grinders available. As the cornerstone of the industry, our innovative, state of the art grinders insure to be the most cost effective and profitable for our customers. Diamond Z offers a broad range of both tub and horizontal grinder models available on tracks or tires. From land clearing to yard waste even C&D grinding nothing out runs Diamond Z.

SAKAI SV544T - ’18, approx. 350 hrs, 83” padfoot drum w/smooth drum kit, #C001431.. $P.O.R.

ROADTEC RP190 - ‘13, approx.. 6200 hrs. EZIV Carlson screed, Moba grade & slope controls......................................................$58,900

SAKAI SW770HF - ‘17 w/approx. 1550 hours, 67” drum, tier III Isuzu engine, fleet machine.. $69,450

ROADTEC RP195 PAVER - ’08, approx. 8890 hrs. Carlson EZIV 10 screed, Moba grade & slope controls....................................$37,500

EXCAVATORS ROLLERS

Liebherr A904C Wheeled Excavator - ‘16, approx 550 Hrs, 2-piece boom, pin grabber coupler, aux hyd..................................$P.O.R.

Liebherr R946 - ‘14, approx.. 800 Hrs, 12’6” stick, QC66 coupler, aux. hyd..............$P.O.R.

CRUSHING AND SCREENING

AGGREGATE EQUIPMENT

JCI K400, (’06), Portable Cone Crusher, 400 HP Elec, 42”x30” Feed Conveyor, #40236..$295,000

CRANES

BROOMS MILLING MACHINES

Drum, Load Out

$174,000

BM1200/35 - ‘15, 1150 Hrs, 4’ Drum, 3’ Also Available, Front Conveyor, #C000846.... $298,000

RX-100 - ‘18 w/475 Hrs, 20” drum, #C001554..........................................$185,900

ASTEC GT104 - ‘17, 325 Hrs, 5.25cyd Hopper, 4’x9’ Top & Bottom Screens, #C001154............

$161,700

ASTEC GT205MF – ’17, approx. 1800 hrs, 5x20 top deck w/high frequency bottom deck, #C001180..........................................$275,000

PAVERS / ROAD WIDENERS

Roadtec RP190 – ’13, 5860 hrs, Carlson EZIV 10-19’ screed w/12” ext, #C001909....$48,000

P.O.R. items may be on rent causing pricing and hours to vary.

GROVE RT650E, (’14) 50-Ton, Tier 4, 105’ Boom, 51’ Jib, #C001600..............................$319,000 GROVE RT765E-2, (’14), 65-Ton, 110’ Boom, 56’ Jib, 2831 Hrs, #C001601........................$CALL GROVE RT880E, (’14), 80-Ton, Cummins QSB6.7L (Tier 4) turbo-charged six cylinder diesel, 41’ to 128’ 4 section full-power synchronized Megaform boom, #C001236................................$374,000

LOADERS AND EXCAVATORS:

LIEBHERR LR636, (‘18) 3.25cyd bucket w/teeth & segments. Front and rear aux. hydraulics for 4 in 1 bucket, winch or ripper. 3 year/6000 hour full machine warranty, #C001745............$249,700

LIEBHERR PR736 LGP, (‘15), 204 HP, 32” Pads, 6-Way Blade, EROPS, #C001941..............$CALL

LIEBHERR R936 LC, (’19), EROPS w/ AC & Heat, auto lube, rear camera, 54” bucket, #C004148.. ................................................................................................................................................$CALL

SAKAI SW354, (’18), #C003395............................................................................................$CALL

Pehler

GROVE GHC130 – (’19), 836 hrs, C004141...$CALL GROVE RT880E – (’14),

John Deere Previews Its Largest-Ever ConExpo Presence

John Deere will have its largest presence ever at ConExpo-Con/AGG 2023.

Totaling 80,000 sq. ft. of booth space, John Deere and Wirtgen are combining forces for the first time at ConExpoCon/AGG, encompassing a 70,000 sq. ft. booth outside in the Silver Lot (S5020). Inside the West Hall (W40844), an additional 10,000 sq. ft. is dedicated to the future of John Deere technology in the construction space.

The John Deere and the Wirtgen Group presence offers customers an engaging experience and an all-encompassing snapshot of the future of construction through industry-leading equipment and technology.

In addition to its expansive and interactive booth experiences, exhibition attendees can anticipate the following from John Deere and the Wirtgen Group:

• one cohesive booth showcasing both John Deere and the Wirtgen Group’s latest machines and technologies.

• 70,000 sq. ft. of outdoor space displaying world-class John Deere and Wirtgen Group equipment, technology and application experience

• 10,000 sq. ft. of indoor space focusing on John Deere technology, forward thinking innovative solutions and John Deere Power Systems.

• 68 machines on display between John Deere and the Wirtgen Group.

• six machines that feature SmartGrade control functionality. Wirtgen Group machines equipped with the latest technologies such as: Wirtgen Performance Tracker, AutoPilot 2.0, 3D Paving, Smart Compact, Spective Connect.

• nine compact construction machines on display such as

Totaling 80,000 sq. ft. of booth space, John Deere and Wirtgen are combining forces for the first time at ConExpo-Con/AGG, encompassing a 70,000-sq.-ft. booth outside in the Silver Lot (S5020). Inside the West Hall (W40844), an additional 10,000 sq. ft. is dedicated to the future of John Deere technology in the construction space.

skid steer loaders, compact track loaders, compact excavators and compact wheel loaders.

• nine electric or hybrid electric John Deere and Wirtgen Group machines on display.

• 36 world premieres of brand-new equipment across the construction, roadbuilding and compact construction segments.

• four production systems, showcasing the current priority

areas for John Deere and the Wirtgen Group, including aggregates, site development, roadbuilding, underground.

• one center feature area for the future generation of Deere built excavators.

• three educational sessions featuring commentary from John Deere and Wirtgen Group experts.

“Being ‘Close To Our Customers’ we understand our contractors desire to have conversations relevant to their production system needs,” the manufacturers said.

John Deere and the Wirtgen Group designed the booth layout with a production system strategy in mind. To assist its customers, four production systems, include aggregates, site development, roadbuilding and underground, were created to emphasize their core business areas. Each production system will showcase key components, equipment and features relevant to their needs and presented first-hand by John Deere and Wirtgen Group brand representatives.

For those exploring educational opportunities, John Deere is hosting a session that will feature Justin Steger, solutions marketing manager at John Deere Construction & Forestry, Thursday, March 16 at 1 p.m. titled “How Grade Control Impacts Earthmoving Productivity.”

From the Wirtgen Group, Tom Chastain, milling product manager, will discuss “Best practices in Milling and Profiling” on Thursday, March 16 at 9:30 a.m.

And lastly, Tim Kowalski, application support manager — HAMM, will lead a discussion titled “Compaction 101: Doing the Right Things, the Right Way” on Friday, March 17 at 10:45 a.m.

For more information, visit johndeere.com/Vegas2023.

Mazio Attachments to Display Innovative Attachments

Mazio will have its experts on hand in the West Hall, at booth #W43211, during ConExpo-Con/AGG, March 14 to 18, 2023, in Las Vegas. Visitors will learn how Mazio’s attachments will help them save time and money in the quarry and on the job site.

Mazio’s newest innovation for 2023 is the tilt-rotator for excavators. Tilt-rotators have seen great interest in Europe, and they are growing in popularity within the United States.

These supplemental attachments work with excavator tools, such as grapples, buckets, or shears, to provide more versatility and precision. They not only rotate 360 degrees, but they also tilt side-to-side by up to 55 degrees. This ability reduces the need for the operator to move the excavator while performing tasks — increasing productivity and efficiency.

The Mazio tilt-rotator features a hydraulic quick coupler that allows the operator to remain in the cab while changing tools. It enjoys maintenance-free operation, with no grease points and no cylinders. It allows access to narrow spaces and on urban projects with large or small equipment.

In addition to the tilt-rotator, the Mazio booth will feature its complete line of demo-

lition tools; hydraulic breakers; and wear tips for grinders, breakers, shears, crushers, pulverizers and processors.

Mazio’s experts work in tandem with its dealers to provide producers and contractors with guidance on ways to increase their productivity and profits, helping them to ensure

success.

Mazio Attachments LLC is an Italian manufacturer of specialized attachments for the construction, demolition, recycling, mining, aggregates, excavation, scrap and forestry industries. With engineering and manufacturing facilities located in the

United States, Italy and Colombia, Mazio designs its distinctive purple attachments to work with all makes and sizes of carrier machine, from hydraulic excavators, skid steer loaders, and backhoes to wheel loaders, tele-handlers, and more.

Mazio attachments are available through a growing dealer network or direct, depending on location. The company offers immediate delivery for spare parts and service, and field training for operators.

For more information, call 561/766-0899, e-mail sales@mazio.us, or visit www.mazio.us. 

Mazio’s tilt-rotators not only rotate 360 degrees, but they also tilt side-to-side by up to 55 degrees. This ability reduces the need for the operator to move the excavator while performing tasks — increasing productivity and efficiency.

The Mazio tilt-rotator features a hydraulic quick coupler that allows the operator to remain in the cab while changing tools.

1198 Pershall Road, Saint Louis, MO 63137 (314) 869-8600

www.mktpileman.com

• Excavator mounted vibratory driver/extractor

• Rotational, side-to-side, fore/aft capabilities

• Remote pendant, wireless remote, or joystick controls

• Ability to operate at high or standard frequency

• Great for low head room applications

• Operates off of excavator auxiliary hydraulic circuit

VISIT US AT BOOTH #S64829 SOUTH HALL FIRST FLOOR

RTC 8040 SII, 40-ton, 105’ main boom, 28’-51’ 2-piece jib, Hydro gas ride, Aux winch, Rear steer indicator..........................................P.O.R.

Manitou MT10055, 10,000 lbs. capacity, 55’ lift height, open cab,

Link-Belt HTC 8675LB, 75-ton, S/N; F2J6-8843, 127’ 4 section full power boom, Aux winch, Block/ball Detroit Series 60 engine, 39’-67’ fly, Mileage: 56,973 10,379 hours, F.O.B. New Jersey......................P.O.R.

2005 Link-Belt HTC 8650, 50-ton, S/N: L8J5-7622, Aux winch, Aux lift sheave, Block/ball, 28’-51’ offset fly, CAT C11 diesel, ZF transmission, CTWT removal, 2,124 hours, Mileage: 11,372, F.O.B. New Jersey......P.O.R.

2008 Terex RT 335-1, 35-ton, S/N: 16266, 94’ main boom, 10,000 Ctwts, Cummins diesel engine – Tier III Block/ball, 1,920 hours, F.O.B. New Jersey......P.O.R.

2020 Manitou ATJ 46+, 900 lbs. capacity, 45’ 6” platform height, 28’ reach, 7’ 6” x 2’ 11” platform...... P.O.R.

Wacker Neuson Premieres New Products at ConExpo 2023

Wacker Neuson is inviting attendees of ConExpo-Con/AGG 2023 to visit Booth W43501 to preview a variety of new products being introduced by the equipment manufacturer. The booth’s theme “All it takes for the challenges you face,” celebrates the company’s dedication to helping contractors meet their daily challenges on the job site.

A central focus of Wacker Neuson’s booth is a 1.7-ton battery-powered excavator, the EZ17e.

“This zero-emission excavator has been a success in the European market and will launch in North America in late 2023 or early 2024,” explained Gert Reichetseder, president and CEO, Wacker Neuson Americas.

“This machine will provide a solution for contractors and rental houses looking for a quiet, zeroemission excavator to expand their businesses into new applications, while meeting environmental regulations,” Reichetseder added.

In addition to the EZ17e, Wacker Neuson will further highlight its zero-emission portfolio for battery-powered compaction and concrete consolidation equipment in the “Meet the Future” area of the booth. This includes the debut of the industry’s first battery-powered reversible plate with direct drive, the APU3050e.

All of Wacker Neuson’s battery-powered plates and rammer, as well as its concrete vibrator are powered by the Battery One battery and charger

system. This new vendor-agnostic brand is a single solution, making the use of zero-emission construction equipment on the job site more practical, according to the manufacturer.

Other excavators to be showcased will include Wacker Neuson’s all new EZ26, a 2.6-ton zero tail excavator and the 5.8-ton ET58 tracked excavator. Both of these machines offer contractors all the newest innovations for comfort, performance and efficiency.

Attendees also won’t want to miss Wacker Neuson’s new additions to the utility track loader family.

“The SM60 and SM120 will be premiered at the show and are great complements to the very successful SM100 mini track loader that was introduced in 2021,” said Reichetseder.

These versatile, stand-on utility track loaders are designed for operator comfort, ease of operation and designed to reduce maintenance costs and total cost of ownership.

Additionally, the newest compact track loader from Wacker Neuson, the ST27 will be unveiled to contractors. This addition to the loader line is the smallest model in the company’s CTL line-up and promotes enhanced visibility and productivity.

“We look forward to meeting with contractors and dealers at the show to share our new products plus the original job site mainstays Wacker Neuson is known for,” Reichetseder said. 

How to Prepare for a Show Expected to Break Records

Don’t Miss Smaller Tents/Exhibits

There is so much to see and many interesting booths, don’t just check out the big ones!

Eat a Good Breakfast

There will be concessions and food available for purchase throughout the show grounds, but make sure to fuel up each morning for the day with a good breakfast. Plus, there’s plenty of incredible breakfast spots to explore in Vegas!

Make Time to Take in Some Las Vegas Attractions

There’s no shortage of things to see and do in Las Vegas. Catch a show, eat at one of the world-famous restaurants, attend a Las Vegas Golden Knights game, or maybe one of your favorite music artists is in town the week of the show. ConExpo-Con/AGG show hours are Tues to Fri: 9 a.m. to 5 p.m.; Sat: 9 a.m. to 3 p.m., so there is plenty of time in the evening to make the most of your Las Vegas experience!

Follow the ConExpo-Con/AGG Social Media for the Latest Information

Stay up-to-date on the latest show information, follow us on each of our social channels!

Download the ConExpo-Con/AGG App

Get all the latest information about ConExpo-Con/AGG 2023, and bring that plan you made in Tip 1 with you via the ConExpo-Con/AGG App. It will be available for both iOS and Android, and its launch will be announced at ConExpoCon/AGG.com.

Save 20 Percent Off Your Badge

Registration for ConExpo-Con/AGG and the co-located International Fluid Power Expo (IFPE) is currently 20 percent off with code MEDIA20 for construction and fluid power pros that get their badge by March 13, 2023.

For more information, visit www.conexpoconagg.com. 

TIPS from page 34

A central focus of Wacker Neuson’s booth is a 1.7-ton battery-powered excavator, the EZ17e.

2017 CATERPILLAR 320FL, ID# VUC0355, SN YBM10482, 2318 HOURS....................$167,800

2017 CATERPILLAR 420F2IT, ID# 8CR6701, SN HWD01479, 2144