Midwest 05 2015 by Construction Equipment Guide

Published Nationally

$3.00

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

Midwest Edition

www.constructionequipmentguide.com

February 28, 2015 • Vol. IXX • No. 5 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910

Inside

Phase 1 Down, 2 to Go on Iowa Hwy. 100 Extension Jeré Fabick (L), current president and CEO of FABCO, and Doug Fabick, current president and COO of Fabick CAT.

AED Hol ds Annual Summit, Condex Show…18

FABCO, Fabick Announce Merger, Historic Reunion Yoder & Frey Sale Feat ures Bargains...84

New construction of an extension onto Iowa Highway 100 in northern Cedar Rapids began in early June 2014 and is to be completed in two phases.

By Dorinda Anderson CEG CORRESPONDENT

Rit chie Br eaks Rec ords at Fl ori da Aucti ons. ..9 5

Table of Contents ............4 Attachment Section .................................35-39 Recycling Section ....55-67 Trucks & Trailer Section ...................................69-77 Business Calendar ........81 Auction Section ......83-101 Advertisers Index ........102

High voltage power lines and endangered turtle crossings were just a couple of things that added challenges to the already complex construction of a 4 mi. (6.4 km) stretch of new highway and the construction of several bridges. New construction of an extension onto Iowa Highway 100 in northern Cedar Rapids began in early June 2014 and is to be completed in two phases. Phase I, at an estimated cost of about $70 million, is expected to be completed by 2018 while Phase II, which includes the paving of the first 4 mi. stretch, is still in the design phase but is expected to be finished by 2020. The 4 mi. Phase I segment runs from Edgewood Road Northeast to Covington Road. Phase II will run from Covington Road to U.S. Highway 30. When both Phases are complete, the project is expected to cost about $200 million. “Access to the project was one of our early challenges,” said John Vu, project manager of the Iowa Department of Transportation, the lead developer of the

project. “On the east side of the river the only access crews had was from Old Ferry Road and so we first had to build a road to be able get to the east side.” The new highway extension will aid in moving traffic in this rapidly growing section of Cedar Rapids. Traffic projections by the Cedar Rapids Community Development Department show that traffic on Edgewood Road is projected to increase from about 22,000 vehicles each day to about 32,000, and from about 20,000 to 39,000 each day on Highway 100. see HIGHWAY page 34

Drilled shafts for bridge abutments along Edgewood Road.

FABCO Equipment Inc. (FABCO), of Milwaukee, Wis., and John Fabick Tractor Company (Fabick CAT), of Fenton, St. Louis County, Mo., recently announced they are joining their two family-owned, independentlyoperated companies to create one of the largest and most dynamic Caterpillar dealerships in the nation. The expanded organization will be led by Doug Fabick (current president and COO of Fabick CAT) as CEO and dealer principal along with his cousin Jeré Fabick (current president and CEO of FABCO) serving as president and co-dealer principal. The combined company will build on what each organization has achieved independently and provide an enhanced ability to grow, expand capabilities and further support customer success, according to the companies. The FABCO identity will transition over time to the Fabick CAT identity; this change is expected to take place over the next 36 months. The corporate headquarters will be located in St. Louis. “The strength, stability and long-term continuity of the Fabick family network of companies will enhance our ability to meet the needs of all of the customers who we have the privilege of serving in our combined territories,” said Doug Fabick. The combined enterprise will operate in a six state region, to include major portions of Missouri and Illinois, one county each in Kansas and Oklahoma, the Upper Peninsula of Michigan and the entire state of Wisconsin. Dealership capabilities will include 37 locations, 100 parts drops, and 550 service technicians, totaling more than 1,100 team members enhancing the see MERGE page 96

Page 2 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

PROVIDING THE BEST IN

USED EQUIPMENT 1969 Cat 950 ..........................................$22,500

2005 John Deere 450C ........................$67,500

2006 Cat 735 ........................................$209,000

1977 Cat D6D ........................................$33,500

S/N 81J01752, 11,630 Hrs, EROPS, tires fair, 3yd bucket, brakes need work

S/N 091869, 10,273 Hrs, EROPS, A/C; Undercarriage Good; Worked Daily; Bucket 4yd

S/N B1N00486, 3,769 Hrs, EROPS, A/C, tailgate, tires good 26.5 X 25

S/N 04X01418, unknown Hrs, OROPS, angle blade manual, twin tilt cyls, undercarriage fair, draw bar, sweeps

1999 Cat 951 ..........................................$12,000

2006 Kobelco SK480 ............................$65,000

2006 Cat 966H ....................................$149,000

2004 Cat 277 ..........................................$19,500

S/N 86J02337, undercarriage fair, bucket, OROPS, hrs unknown

S/N YS06U0571, 9187 Hrs, EROPS, Long Stick, Bucket, Undercarriage Fair

S/N A6G00225, 8535 Hrs, EROPS, A/C, GP-bkt, tires good, engine rebuilt at 7422 hours

S/N CNC02569, 4228 Hrs, EROPS/AC, Bucket, UC Good, Hyd Cplr

2003 Hitachi ZX600LC..........................$79,500

2011 Cat 966K4....................................$195,000

1990 Cat D4H ........................................$33,500

1999 Cat D6M LGP ..............................$51,750

S/N 004015, 10,484 Hrs, EROPS, Undercarriage Fair, Coupler, Bkt

S/N TFS00170, 11,515 Hrs, Bucket, Tires Good, EROPS, A/C, Auto Lube

S/N 9DB01955, 8345 Hrs, OROPS, undercarriage good, rebuilt trans, drawbar, PAT blade

S/N 2RN00542, 10,370 Hrs, EROPS, PAT blade, winch, rear screen, under carriage good

1998 CAT D3C LGIII ............................$18,750

1993 Ingersoll Rand ST105 ..................$6,500

2012 Cat 262C2......................................$32,500

2004 Cat D6RLGP DSII ........................$74,000

S/N 7XL01390, unknown Hrs, OROPS, PAT blade, undercarriage good to fair, paint good

S/N 5137, 5169 hours, no ROPS, runs good, drums good

S/N TMW00469, 2847 Hrs, EROPS, AC, Case Control, 2 Speed, 2 Tires Good 2 Tires Poor

S/N ADE00479, 11,090 Hrs, EROPS, A/C, S Blade, Drawbar, Undercarriage On Run Out

Contact: Jeff Speer

FABCO Equipment Inc. 11200 W. Silver Spring Rd., Milwaukee, WI 53225

800.353.1944 ... For Used Equipment 877.754.4477.... For Used Work Tools & Attachments 414.461.9100 ... In WI and Upper Michigan

www.FABCO.com Hundred of machines. Listings updated daily.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 3

One Call Rents It All!

(800)941-2133 • Largest Independent Rental Fleet in the Midwest!

2012 Kobelco SK35SR-5 …... $42,500

2011 Kobelco SK50SR-5 ….... $49,500

2012 Kobelco 80CS …........... $78,000

A/C, 28HP Tier 4 diesel, 12” rubber tracks, 4’ 4” stick, 10’ 1” dig depth, 8,000 lbs., 5’ 7” pushblade, 2 speed travel, manual coupler, 303 hrs..... #KOB168

A/C, 39.4HP Tier 4, 15.5” rubber tracks, 5’ 1” stick, 11’ 9” dig depth, 10,300 lbs., 6’ 5” pushblade, pattern control, 2 speed travel, 729 hrs. .............. #KOB092

A/C, 56HP Tier 4, INDR, 17.5” rubber tracks, 7’ stick, 15’ 3” dig depth, 17,600 lbs., 8’ 2” pushblade, aux. hydraulics, pattern control, 1,079 hrs. ….. #KOB175

2012 Kobelco SK140SR LC .. $99,500

2007 Kobelco SK210-8 LC … $ $78,500

2014 Kobelco SK210LC …… $145,500

2011 Kobelco SK210-8E ...... $104,500

A/C, 94HP Tier 3, INDR, 24” pads, 9’ 4” stick, 19’ 7” dig depth, JRB hydr coupler, additional counterweight, 32,600 lbs., aux. hydr, 1,694 hrs. …........... #KOB146

A/C, 667T A/C TA/MEB A/ME 158HP diesel, 32” pads, 9’ 8” A/MEB stick, 22’ dig depth, auxiliary hydraulics, 47,000 lbs., 3,569 hrs. …............................................... #10187

A/C, 157HP Tier 4, 31.5” pads, 9’ 8” stick, 22’ dig depth, hand cntrl, pattern cntrl, hydr coupler, front cab guard, 48,500 lbs., 974 hrs. ........... #KOB207

A/C, 150HP Tier 3 diesel, 32” pads, 9’ 8” stick, 22’’ dig depth, aux. hydr., pattern contrl, JRB hyd. coupler, 47,800 lbs., 2,165 hrs. (hammer not includ.) .. #KOB104

2011 Kobelco SK210-8E ...... $119,500

2011 Kobelco SK235SR LC-2 .. $119,500

2013 Kobelco SK210LC-9 .... $132,500

2009 Kobelco SK210-8 LC ..... $89,500

A/C,150HP Tier 3 diesel, 32” pads, 9’ 8” stick, 22’ dig depth, aux. hydraulics, pattern control, JRB hydr. coupler, 47,800 lbs., 1,350 hrs. .............. #KOB122

A/C,153HP Tier 3, IDNR, 32” pads, 9’ 8” stick, 22’ dig depth, JRB hydr coupler, 57,500 lbs., main pin hydr thumb, pattern control, 2,070 hrs. .. #KOB117

A/C, FPT F4GE9684E 150HP, 32” pads, 9’8” stick, 22’ dig depth, auxiliary hydrualics, single pedal travel, 47,800 lbs., 600 hrs. ............................. #10814

A/C, NH 667T TA/MEB A/MEB 158HP diesel, 32” pads, 9’ 8” stick, 22’ dig depth, auxiliary hydraulics, 47,800 lbs., 1,800 hrs. .................................................... #10235

2010 Kobelco SK260LC LR-8 .. $132,500

2005 Kobelco SK330 LC ….... $89,500

2012 Kobelco SK485LC-9 … $295,500

2008 Kobelco SK485-8 ….... $209,500

Cab with A/C, FPT F4HE9684C J1, Tier 3 190HP diesel, 31.5” pads, 27’ 1” stick, pattern control, 60’ reach, 60,000 lbs., 2,182 hrs. …............ #KOB081

Cab with A/C, Mitsubishi 6D16 247HP diesel, 32” pads, 10’ 10” stick, 24’ 7” dig depth, 77,800 lbs., 4,714 hrs. …................................................. #8977

A/C, Tier 4 diesel, 36” pads, 13’3” stick, 27’6” dig depth, 1-2 way auxiliary hydraulics, pattern changer, rear view camera 111, 800 lbs., 600 hrs. .......................... #10811

A/C, 326HP Tier 3 diesel, 36” pads, 1 or 2 way auxiliary hydraulic circuit, dual pump with rotation, hydr removable counter weight, 110,000 lbs., 3,482 hrs. …......... #9351

Illinois T Truck & Equipment • 320 Briscoe Drive, Morris, Illinois 60450 rental@iltruck.com sales@iltruck.com • www www.iltruck.com .iltruck.com • (800) 941-2133

Page 4 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWesT eDITIon

In ThIs Issue 14

Circulated Throughout

Founder, Publisher & CEO Midwest Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Main office

To read these stories and many more, visit www.constructionequipmentguide.com

specIal secTIon 37 RECYCLING, CRUSHING AND SCREENING Be sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

feaTures 12 AGC OF MINNESOTA ‘BRINGING IT TOGETHER’ AT ANNUAL MEETING AGC of Minnesota held its 95th Annual Meeting, “Bringing It Together,” on Jan. 15 at the Minneapolis Marriott in Minnetonka, Minn. Attendees, speakers, planning committee members, sponsors, exhibitors and raffle item donors all played important roles.

14 SCHARBER & SONS CELEBRATES NEARLY A CENTURY OF BUSINESS On Jan. 29, Scharber & Sons in Rogers, Minn., celebrated nearly 100 years of business with an open house.

18 MORE THAN 1,400 ATTEND AED SUMMIT, CONDEX SHOW

54 ALLU ASSISTS IN WIN-WIN SCENARIO, PERFORMS IN SITU MASS STABILIZATION In a win-win scenario for safe disposal of dredged harbor sediment and the need for additional fill material for closure and capping of a wastewater pond, planners and contractors turned to ALLU-brand equipment to perform insitu mass stabilization.

Toll Free Fax Web site Editorial e-mail Advertising e-mail For advertising rates Contact

315/866-1423 800/988-1203 315/866-1379 e-mail khogeboom@cegltd.coom

Toll Free Fax

89 IRONPLANET/CAT AUCTION SERVICES HOLD JOINT

95 RITCHIE HOSTS RECORD-BREAKING GLOBAL AUCTION IN ORLANDO

Joseph S. McKeon • Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

Kent Hogeboom National Sales Manager

Contact

IronPlanet and Cat Auction Services sold 1,430 items for $48.1 million in gross merchandise value at its live unreserved public auction in Kissimmee, Fla., which took place Feb. 11 to 13.

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com

773/769-4090 800/632-0233 773/769-4280 e-mail jmckeon@cegltd.com

YODER & FREY SALE

SALE IN FLORIDA

Edwin M. McKeon Sr. Joseph S. McKeon Craig Mongeau Christine Wolkin Pete Sigmund John Pinkerton Tom Weinmann Cathy Printz

Toll Free Fax

84 BIDDERS TAKE ADVANTAGE OF BARGAINS AT Yoder & Frey held its 41st annual Florida Auctions sale Feb. 9 to 16 in Kissimmee, Fla. The seven-day auction featured a huge assortment of backhoes, wheel loaders, excavators, dozers, dump trucks, motorgraders, paving equipment, attachments and much more.

• North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

Ed Bryden • Central and Eastern Indiana • Michigan • Ohio • Kentucky

440/268-9690 800/810-7640 440/268-9691 e-mail ebryden@cegltd.com

Toll Free Fax

Contact

Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota • South Dakota

952/353-1770 866/413-4265 952/353-2750 e-mail pkiel@cegltd.com

Toll Free Fax

The Associated Equipment Distributors (AED held its 2015 Summit and Condex show in Orlando, Fla., Feb. 10 to 13. The AED Summit and Condex is an annual convention designed specifically to provide equipment distributors with opportunities to see new products, meet with current and prospective business partners, attend educational seminars and network with dealer peers.

Ritchie Bros. sold a record-breaking 10,500-plus equipment items and trucks at its global auction Feb. 16 to 20 in Orlando, Fla.

20 CANADIAN RURAL MUNICIPALITIES ORDER SDLGS,

69 KENWORTH T880 Vocational Truck

FIND THEM VALUABLE TO FLEETS

70 DURACLASS HPT-316 Dump Body

74 MACK mDrive HD Automated Manual Transmission

Contents Copyrighted ©2015, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

DeparTMenTs

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

42 ALL PURCHASES 17 TADANO HYDRAULIC CRANES FOR FLEET The ALL Family of Companies has closed the deal on two Tadano ATF 400G-6 (450 ton [408 t]) hydraulic all terrain cranes, just one month after adding 15 Tadano GR-550XL (55 ton [50 t]) hydraulic rough terrain cranes to its national fleet.

equIpMenT

81 BUSINESS CALENDAR 81 CLASSIFIEDS 83 COMING AUCTIONS

Mobile

Facebook

Twitter

YouTube

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 5

Quality Used Equipment...with support to back it up

Komatsu D51PX-22, ’07, 5,510 hrs........$114,500

Komatsu PC00LC-7LF, ’05, 5,896 hrs ....$124,500

DOZERS

MILLING

WATER EQUIPMENT

Cat D5C XL, ’00, 8,750 hrs ......................$24,500 Komatsu D51EX-22, ’08, 2,410 hrs........$112,500 Komatsu D51PX-22, ’07, 5,510 hrs ......$114,500 Komatsu D51PX-22, ’08, 4,247 hrs ......$114,500 Komatsu D61PX-15EO, ‘07, 4,771 hrs ..$120,000 Komatsu D65EX-15, ’06, 2,301 hrs........$144,500 Komatsu D65EX-15EO, ’07, 3,934 hrs ..$149,500 Komatsu D155AX-6, ’07, 6,524 hrs ......$239,500 Komatsu D275AX-5, ’03, 23,015 hrs ......$99,500

Roadtec RX700, ’08, 4,630 hrs..............$155,000 Wirtgen W60, ’07, 1,206 hrs....................$84,500 Wirtgen W60, ’08, 628 hrs ....................$144,900 Wirtgen W60 Rumbler, ’11, 400 hrs......$240,000 Wirtgen W600, ’03, 2,403 hrs..................$59,500 Wirtgen W1900, ’08, 4,446 hrs ..................$CALL Wirtgen W2100, ’04, 8,538 hrs..............$209,500

Komatsu HM300-2, ’06, 6,500 gal ........$275,000 Komatsu HM400-2, ’07, 8,000 gal ........$395,000

GRADERS Komatsu GD655-3C, ’06, 2,055 hrs ......$134,500 Komatsu GD655-3EO, ’09, 1,673 hrs ....$154,500

FORESTRY Norco Puma 220, ’11, 78 hrs ....................$CALL Ponsse Cobra HS10, ’98, 20,013 hrs ......$75,000 Valmet 415EX/Rolly II, ’05, 10,092 hrs $124,500

SCRAPERS Deere 762, ’76, 2,911 hrs ........................$21,000 Deere 762, ’78, 5,743 hrs ........................$21,000

MATERIAL HANDLERS Cat 365CL-MH, ‘08, 10,428 hrs ............$137,500 Gehl RS8-42, ’03, 3,594 hrs ....................$37,500 Komatsu P400LC-8MH, ’08, 6,095 hrs ..$219,500

PAVING Blaw-Knox PF115, ’08, 1,921 hrs ............$14,500 Vogele 1110WB, ’03, 1,004 hrs ..............$85,000 Vogele 5103-2, ’11, 1,273 hrs ..............$250,000 Vogele Super 700, ’07, 566 hrs ..............$79,500

COMPACTION Bomag BC61RB, ’00, 15,862 hrs ............$54,900 Bomag BC1172RB, ’05, 15,531 hrs ........$94,900 Bomag BW205AD, ’02, 3,520 hrs ............$21,500 Dynapac CA144D, ’08, 625 hrs ................$42,500 Hamm HD14VV, ‘09, 794 hrs ..................$26,500 Hamm HD14VV, ’09, 2,700 hrs ................$19,500 Hamm HD90 Ozzy, ’04, 4,300 hrs ............$36,500 I-R DD24, ’99, 8,421 hrs ..........................$12,500 Volvo DD90HF, ’09, 638 hrs ....................$59,500

Deere 350DLC, ’07, 6,832 hrs ..............$109,500

V I S I T

WHEEL LOADERS Komatsu WA70-5, ‘06, 2,592 hrs ............$47,500 Komatsu WA250-5L, ‘07, 3,892 hrs ........$93,500 Komatsu WA250-6, ’11, 5,646 hrs ..........$94,500 Komatsu WA320-7, ’13, 462 hrs............$174,500 Komatsu WA320-7, ’14, 81 hrs..............$165,000 Komatsu WA380-6, ’11, 2,094 hrs ........$179,500 Komatsu WA380-7, ’13, 1,385 hrs ........$185,000 Komatsu WA430-6, ’07, 4,404 hrs ........$129,900 Komatsu WA450-6, ’07, 8,069 hrs ........$149,500 Komatsu WA500-3, ’98, 15,107 hrs ........$75,000 Komatsu WA500-3, ’98, 11,556 hrs ........$79,500 Komatsu WA500-6, ‘06, 11,705 hrs ......$134,500 Terex TL300-2, ’08, 2,441 hrs..................$69,500

OFF HIGHWAY TRUCKS Komatsu HD465-7, ‘06, 19,003 hrs ......$219,500 Komatsu HD465-7, ’06, 18,843..............$219,500

CRUSHING/SCREENING Kleemann MSD190D Screen, ’13, 688 hrs ............ ................................................................$255,000

Wirtgen W2100, ’04, 8,538 hrs....................................$209,500

Kleemann MC110Z Crusher, ’13, 714 hrs.............. ................................................................$475,000

EXCAVATORS Case CX135SR, ‘11, 2,350 hrs ..............$104,500 Cat 330CL, ’02, 12,032 hrs ......................$59,500 Cat 345BL, ’03, 10,750 hrs ......................$62,500 Cat M318, ‘96, 6,440 hrs ........................$39,500 Deere 350DL, ’07, 6,752 hrs..................$109,500 Deere 350DLC, ’07, 5,837 hrs ..............$109,500 Deere 350DLC, ’07, 6,832 hrs ..............$109,500 Kobelco SK135SRLC, ’01, 4,114 hrs ......$27,500 Komatsu PC00LC-7LF, ’05, 5,896 hrs ....$124,500 Komatsu PC35MR-2, ‘07, 4,747 hrs ........$26,500 Komatsu PC88MR-8, ‘09, 1,195 hrs ........$74,500 Komatsu PC138USLC-8, ’11, 1,142 hrs $124,500 Komatsu PC138USLC-8, ’11, 3,218 hrs $104,500 Komatsu PC160LC-7, ’05, 8,230 hrs........$54,500 Komatsu PC200LC-6, ’95, 11,780 hrs......$34,500 Komatsu PC200LC-6, ’01, 5,824 hrs........$52,500 Komatsu PC200LC-7, ’02, 7,395 hrs........$79,500 Komatsu PC200LC-7, ’03, 6,850 hrs........$59,500 Komatsu PC200LC-7, ‘03, 8,114 hrs........$79,500 Komatsu PC200LC-7, ’04, 7,640 Hrs ......$89,500 Komatsu PC200LC-7, ’05, 3,953 hrs......$124,500 Komatsu PC220LC-6, ’96, 6,510 hrs........$54,500 Komatsu PC220LC-8, ’06, 9,084 hrs........$96,500 Komatsu PC220LC-8, ’06, 2,606 hrs......$139,500 Komatsu PC220LC-8, ’07, 5,757 hrs......$119,500 Komatsu PC220LC-8, ’09, 4,707 hrs......$129,000 Komatsu PC228USLC-1, ’99, 4,400 hrs ..$54,500 Komatsu PC300LC-7EO, ’06, 7,736 hrs $110,000 Komatsu PC300LC-7EO, ’07, 4,714 hrs $157,500 Komatsu PC360LC-10, ’14, 655 hrs ......$269,500 Komatsu PC360LC-10, ’12, 1,148 hrs....$264,500 Komatsu PC400LC-7, ’04, 10,814 hrs......$59,500 Komatsu PC400LC-7, ’05 11,134 hrs ......$92,500 Komatsu PC450LC-8, ’11, 2,389 hrs......$309,500 Komatsu PC600LC-7, ’05, 10,328 hrs....$199,500 Komatsu PC600LC-7, ’05, 5,482 hrs......$253,500 Komatsu PC600LC-8, ’06, 10,478 hrs....$199,500 Komatsu PC750LC-7, ’04, 6,613 hrs......$349,500

Financing Available for Qualified Buyers

15 Roland Branch Locations in IL, IN, MI, MO, and WI

Call Jay Germann (217) 789-7711 • Email: jgermann@rolandmachinery.com

R O L A N D M A C H I N E R Y . C O M

Page 6 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke • (630) 739-7770

Excavator Rental Specials Bolingbrook, IL

Serving the Constructor ®

View our complete Used & “Like New” inventory at McCannOnline.com

Clean, reliable equipment

Competitive rates

Rent by the day, week, or month

Delivered to your job site

Illinois Addison 630-627-0000 Bolingbrook* 630-739-7770

2011 Case 580SN, s/n JJGN58SNVAC536038, 2012 Case SV250, s/n JAFSV250JBM435496, 2150 Hrs, Cab w/Heat & AC, Ext-Hoe, Ride 100 Hrs, Cab w/Heat & AC, Two Speed, Hyd Control, Two Lever, 4-in-1 Bkt, Aux Hyds, Coupler, 78” Bkt, 33x15.5 Tires ........$43,500 12”, 18” & 24” Bkts..........................$59,900

2012 Case SR250, s/n JAFSR50VBM434310, 2013 Takeuchi TS70V, s/n T3V07000217, 300 Hrs, Cab w/Heat & AC, Two Speed, 72” 750 Hrs, Cab w/Heat & AC, Blc High-Flow, 12x16.5 Tires, 72” Bkt......................$39,500 Bkt w/Edge, 12x16.5 Tires................$34,900

Chicago 312-942-9200 Crestwood 708-597-3110

CX130 Excavator

CX160 Excavator

CX210 Excavator

CX225 Excavator

MC r h EJH EFQUI $410/Day, $1,230/Week, $3,690/Month

MC r h EJH EFQUI $475/Day, $1,425/Week, $4,275/Month

MC r h EJH EFQUI $580/Day, $1,740/Week, $5,220/Month

MC r h EJH EFQUI $755/ Day, $2,265/Week, $6,795/Month

Rent Today!

McHenry* 815-385-0420 Wauconda 847-526-9444

2007 Case 580SM, s/n N7C428087, 5100 Hrs, Cab w/Heat & AC, Two Lever, Ride Control, 82” 4-in-1 Bkt, 12”, 18” & 24” Bkts ........................................................$43,500

2012 Case Cx250CLR, s/n DAC250K6NCSAM1210, 500 Hrs, 60’ Long Reach, Control Pattern, 60” Ditch Bkt............ ......................................................$230,000

2006 Case 580SM, s/n N6C412119, 4600 Hrs, 2012 Case 850L, s/n NCD80092, 700 Hrs, Cab w/Heat & AC, 4WD, Ext-Hoe, Ride Cab w/Heat & AC, 124” Blade, 24” Grousers Control, Two Lever, 82” Bkt, 12” & 24” Bkt .. ......................................................$110,000 ........................................................$45,000

CX240 Excavator

CX330 Excavator

MC r h EJH EFQUI $700/Day, $2,100/Week, $6,300/Month

MC r h EJH EFQUI MC r h EJH EFQUI equipment. Call us today to supply your next $875/Day, $2,625/Week, $7,875/Month $1,235/Day, $3,705/Week, $11,115/Month

McCann CX460 Rents aExcavator full line of heavy and light construction rental. McCannOnline.com

National Cranes National 9103A Crane 26 Ton Crane, 103’ 4-Section Hydraulic Boom, 44’ Pin on Self Stowing Jib, High Speed Winch, Radio Remote Control, 22’ Steel Bed w/Bulk Head, Underbody Toolbox, Boom Rest, Front & Rear Outriggers & “A” Frame Outriggers at Mast. 2015 Kenworth T400 w/350hp Cummins PACCAR PX-9 Engine, Fuller 10 Speed, 8LL Transmission, 20K Front & 40K Rear Axle, Air Brakes, Differential Locks.

For Sale or Rent Call For More Information

National 671E Crane 20 Ton Crane, 71’ 3-Section Hydraulic Boom, Rear Mount, High Speed Winch, Main “A” Frame Outriggers and RSO, 360˚ Stability, Dual Main Controls, 18’ Aluminum Load Bed. 2006 Kenworth T-800, Cummins 15X 15L 475hp, Fuller 10 Speed, 20K Front & 46K Rear Axles, w/approx. 185,000 miles & 9,800 hrs.

For Sale Only Call For More Information

Star Equipment

STAR

Construction Equipment & Supplies Sales • Service • Rentals

EQUIPMENT LT D .

www.starequip.com 877-267-7203 Des Moines • Ames • Cedar Rapids • Waterloo

Indiana Schererville* 219-865-6545 *Case authorized dealer location

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 7

Visit us at: www.amstate.com

PAVERS / ROAD WIDENERS BLAW KNOX RW100 - ’83, RH Hand Discharge, w/Broom, #C000638..............................$34,950 BOMAG CR362L - ‘14, 518 Hrs, Track Paver, Stretch 16 Electric Screed, Topcon V System and More, #C000555 ..................................................................................................................P.O.R. GOMACO GT9500 - ’14 283 Hrs 14’8” Mining Head, Front Lift Arms, Extended Sensor Boom, High Pressure Water System ..............................................................................................P.O.R. LEEBOY L7000T - ’07, 3994 Hrs, Track Paver, #C000697 ..................................................$24,500 MAULDIN 1550C - ‘09, 1533 Hrs, Track, Conveyor Feed, #C000620, S/N 2138 ................$44,950 MIDLAND SPD12- ‘13, 221 Hrs, will go 12’ wide..................................................................P.O.R. NEAL CART PATH PAVER - ‘08, 638 Hrs, 5’-8’ Screed Conveyor Feed, #61886A, S/N 03-0608 .... ..........................................................................................................................................$32,500 CALL items may be on rent causing pricing and hours to vary.

MILLING MACHINES BOMAG BM600/15 - ’14, 156 Hrs, 24” Grinder with rear discharge conveyor, #C000525..P.O.R. BOMAG BM1200/30 - ‘14, 684 Hrs, 4’ Mid Mount Grinder with Front discharge conveyor, #C000452 ..........................................................................................................................................P.O.R. BOMAG BM 1200/35 - ’14, 251 Hrs, 3’ or 4’ Drum, Rear Mount Grinder with Front discharge conveyor, #C000525 ........................................................................................................................P.O.R. WIRTGEN W50DC - ‘13, 20” Cut, Deep Cut Machine, 3 Wheel, Rear Discharge Mill, 236 Hrs ..$214,950

LIEBHERR R954BHD W/ LABOUNTY MSD4500R SHEAR

GROVE RT855B CRANE

YOUR AUTHORIZED DEALER

in WISCONSIN and UPPER MICHIGAN for:

GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS • LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLER CRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/ JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAG CRUSHERS • MANITOWOC CRANES

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT ALLIS 500-SD PORTABLE CONE CRUSHER, 300 HP electric motor, rear feed conveyor, side discharge conveyor, motor control panel, tri-axle, hydraulic leveling ................................................................................................$130,000 JCI/FABTEC 6’X20’ TD DUAL SCREEN PLANT, (2) 30” reversing conveyors under primary screen, 60” conveyor

ROLLERS

under secondary screen, (3) 42” cross conveyors (6) hydraulic leveling jacks, motor control panel ............$182,500

BOMAG BW135AD - ’97, Vibratory Double Drum, #C000695 ................................................$8500 HYPAC C784 - ‘08, RUNNING AND WORKABLE, #C000673 ..............................................$25,950 INGRAM 315 - 4 to Choose from, 3 Wheel Static Roller, s/n & Hrs Available ..............$26,500 Ea. SAKAI SW990 - ’14, 721 Hrs, 84” Double Drum Vibratory Roller, #RR10133 ................$114,986 SAKAI SW880 - ‘12, 845 Hrs, 79” Double Drum Vibratory Roller, #61938A, S/N 10142 .............. ........................................................................................................................................$109,900 SAKAI SW770HF - ’14, 687 Hrs, 67” Double Drum Vibratory Roller, #C000532 ..............$97,822 SAKAI SW770HF - ’12, 700 Hrs, 67” Double Drum Vibratory Roller, #C000577 ..............$89,916 SSAKAI SW502 - ‘13, 491 Hrs, 51’ Drum 9000 lb remaining std and or eptw warranty, #C000212..........................................................................................................................$35,148 SAKAI SW300 - ‘13, 114 Hrs, 40” Double Drum Vibratory Roller, #C000211, S/N 40156 $32,600 SAKAI GW750-2 - ’14, 110 Hrs, Vibratory Pnuematic Tire Roller, #C000533 ................ $124,808 *Comes with any remaining standard and 3 year extended power train warranty.

JCI K-300 “KODIAK” PORTABLE CONE PLANT, 300 hp electric motor, 36”x 20’ side discharge conveyor, 36”x 35’ feed conveyor, motor control panel, hydraulic leveling......................................................................................$375,000 POWERSCREEN 510 COMMANDER RINSER SCREEN PLANT, 11.8 Yd. hopper with hydraulic dump grizzly, 36” feed conveyor, 5x10 3-Deck screen, tandem axle, Deutz diesel ..................................................................................$52,400 METSO/NORDBERG MODEL HP300 CLOSED CIRCUIT PORTABLE CONE PLANT, with a 6'x20' Triple Deck Screen. 2003 Model Year ................................................................................................................................................$360,000

CRANES GROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom, 32’ to 56’ Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work ....................................$155,900 GROVE RT855B 55 TON ROUGH TERRAIN CRANE, 1995, with Cummins diesel, 37’ to 115’ boom, 35’ to 60’ swingaway, LMI, Grove model HO30 main & aux. hoists, 29.5x25 tires ..............................................$159,500

EXCAVATORS

AMERICAN 5300, 1988, 70 Ton Crawler Crane, Cummins w/3 Stage Converter, CLL on One Drum, Third Drum,

GRADALL XL4100 - ‘94, 8368 Hrs, Working as is, #C000386, S/N 414218......................$19,500 GRADALL XL4100 - ‘98, 8884 Hrs, Workable, as is, #62013A, S/N 413282 ....................$25,000 GRADALL XL4100 - ‘02, 7745 Hrs, Good Machine, #C000402, S/N 411552 ....................$42,500 GRADALL XL4100 - ‘02, 7068 Hrs, Call on this One, S/N 415548 ....................................$35,000

Contact Tim or Marty in Illinois

1-800-307-0221 treuss@finkbinerequipment.com mahrendt@finkbinerequipment.com Photos & Detail Descriptions visit: www.finkbinerequipment.com

Independent Travel, 130’ Boom, 30’ Jib ................................................................................................$155,000

SCRAP HANDLING EQUIPMENT LIEBHERR R954BHD WITH A LABOUNTY MSD4500R SHEAR, Carrier and shear have been refurbished ..CALL

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Lanny Peterson at:

lpeterson@amstate.com or mobile 1-715-574-8089 or 1-800-242-7113

Page 8 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NEW M-SERIES IN STOCK! Authorized Bobcat Dealer

Bobcat S650 with SB240 Snowblower Available Today Bobcat Excavators in Stock, Call for Pricing

Bobcat Diesel 3400 XL with Track System. Call for Pricing

New T450 In Stock. Call for Pricing.

Dassel Location

OPEN HOUSE Sat., April 25th

Largest Selection in the Midwest!

New T450 In Stock. Call for Pricing.

USED EQUIPMENT ®

Authorized Bobcat Dealer Bobcat 440 ................Starting at $4,500 Bobcat 463’s ..............Starting at $8,000 Bobcat 542B ..............Starting at $6,900 Bobcat 642 ..............................$7,500 Bobcat 642B ............................$8,500 Bobcat 743 ................Starting at $8,000 Bobcat 751 ......Several Starting at $9,900 Bobcat 753 ..............Starting at $10,000 Bobcat 763F, Series, Open Cab ....$11,500

Bobcat 773G, With Heat ............$15,900 Bobcat 843, Heated Cab ............$10,000 Bobcat 853’s ............Starting at $11,000 Bobcat 863, With Heat ..............$12,900 Bobcat 863G ............................14,900 Bobcat 873 ............................$17,900 Bobcat S130, 2006, Heated Cab ......CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours....Starting at $14,900 Bobcat S250..............Starting at $17,500

Compact Track Machines Bobcat T190’s............Starting at $17,500 Bobcat T200..............Starting at $17,500 Bobcat T250, Gold ......Starting at $24,500 Bobcat T300..............Starting at $25,000

Other Brands Gehl 4615 Skidloader, Open Canopy $8,500 Mustang 2105 ............................CALL New Holland L175........................CALL John Deere 250/260 Models Available...... ..............................................CALL

Excavators Bobcat 331’s, Several w/Heat & Open Canopys ..................Starting at $15,900 Bobcat 334 ................................CALL Bobcat 337D, A/C, HT ................$35,900 Bobcat 341 ..............Starting at $29,990 Bobcat 442 ....Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500 U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857 New Location: Farm-Rite Willmar 1515 West Litchfield Ave. • Willmar, MN 56201 320/235-3672 New Location: Farm-Rite of St. Cloud 810 Mayhew Lake Road N.E. • St. Cloud, MN 56304 844/262-2281

www.farmriteequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees WHEEL LOADERS

Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25 rubber, 15K hours, work ready . . . . . . . . . . . .$42,500 Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . . . .$79,500 John Deere 624G, 1996, EROPS, quick coupler, GP bkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$46,000 Volvo L60E, 2005, EROPS, coupler, aux hyd, boom susp, 20.5R25, v. good . . . . . . . . . . . . . . . . . .$89,500 COMPACTORS

IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean $69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000 (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500 LANDSCAPING

Case/IH 485 Utility Tractor, 1986, Case 3 cyl dsl engine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd angle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500 CRAWLER LOADERS

Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt .$37,500 Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000

OFF ROAD HAULERS Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready . . . . . . . . . . . . . . . .$127,500 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites . . . . .$87,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 CRAWLER TRACTORS

Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6" TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000 (5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALL Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB coupler, plumbed, 8’6” width, nice, work ready . .CALL Volvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing very good condition . . . . . . . . . . . . . . . . . . .$159,000 TRUCKS & TRAILERS

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL AIR COMPRESSORS

IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL SPECIALS

(12) Allmand Light Plants, 2008-2010, diesel, s/a towtype, (4) MH lights, excellent . . . . . . . . .From $5,200

(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, BACKHOES winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea. Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000 Case 580L Rubber Tire Loader Backhoe, 1997, (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea. DRILLS John Henry Drill Mtd on Cat 320N, 1994, 24' mast, CRANES Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, Duraquip dust collection . . . . . . . . . . . . . . . .$150,000 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 MISCELLANEOUS Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom (2) Balderson Broom Attachment for Cat IT Machines, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. MOTOR SCRAPERS

ATTACHMENTS Cat 613C Water Wagon, 1994, 5000 gal drop tank, BUCKETS ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 PC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good Over 100 Excavator, Loader, Specialized & Grapple condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Buckets in Stock Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice -Call For Your Needs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, HYDRAULIC EXCAVATORS excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick couOthers Available Call pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000 Prices Are Negotiable - At Your Inspection Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber, All Equipment is Owned & Operated By operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER ALEX E. PARIS CONTRACTING CO., INC.

Page 10 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

VOLVO USED EQUIPMENT Contact your local dealer: Doug Wilson 704.562.2032 doug.wilson@ascvolvo.com Billy Brice 678.318.9500 billy.brice@ascvolvo.com

ASC Construction Equipment USA, Inc. North Dakota Bismarck Fargo Minot Williston North Carolina Charlotte Raleigh Asheville Greenville South Carolina Columbia North Charleston Piedmont Georgia Buford Forest Park Savannah East Tennessee Knoxville Chattanooga

2013 VOLVO A25F, 1586 Hrs ..............$297,000

2013 VOLVO L90G, 600 Hrs ................$192,500

2012 VOLVO EC340DL, 1905 Hrs ....$220,000

A40 Finance leasing available for 24 months with payments as low as $7,900 per month. Call Doug Wilson for details.

Excavators-Crawler

Off-Highway Trucks

2008 VOLVO EC210C LC, 3291 Hrs..............................................$104,500 2011 VOLVO EC210CL, 3693 Hrs ..................................................$138,900 2013 VOLVO EC220D, 2353 Hrs ....................................................$144,500 (4) 2013 VOLVO EC220DL, 1653-1973 Hrs ........$137,500-$148,500 2008 VOLVO EC240CL, 7200 Hrs ....................................................$93,500 2011 VOLVO EC240CL, 3200 Hrs ..................................................$150,000 2012 VOLVO EC250D LR, 2236 Hrs ..............................................$189,000 2011 VOLVO EC250DL, 3400 Hrs ..................................................$161,250 2013 VOLVO EC250DL, 2355 Hrs ..................................................$170,500 2004 VOLVO EC290B LC, 9540 Hrs ................................................$46,200 (2) 2011 VOLVO EC340DL, 3625-4554 Hrs ........$177,800-$184,000 (7) 2012 VOLVO EC340DL, 1600-4008 Hrs ........$181,000-$220,000 (6) 2013 VOLVO EC340DL, 1549-2819 Hrs ........$203,500-$231,000 2013 VOLVO EC380DL, 3203 Hrs ..................................................$222,000 2011 VOLVO EC460C LC, 5858 Hrs ............................................$250,000 (2) 2012 VOLVO EC480DL, 2700-2798 Hrs ........$291,500-$328,000 2013 VOLVO EC480DL, 2842 Hrs ..................................................$324,500 2013 KOMATSU PC360 LC-10, 900 Hrs......................................$278,000

2011 VOLVO A25F, 4300 Hrs ............................................................$242,000 (3) 2012 VOLVO, A25F, 2900-3185 Hrs ................$283,500-$305,750 (5) 2013 VOLVO A25F, 1586-2000 Hrs ..................$286,000-$305,000 2005 VOLVO A30D, 7521 Hrs ..........................................................$159,500 2011 VOLVO A30E, 3475 Hrs............................................................$283,500 (9) 2012 VOLVO A30F, 2525-4021 Hrs ..................$297,000-$328,000 (3) 2013 VOLVO A30F, 2012-3000 Hrs ..................$324,500-$330,000 2014 VOLVO A30F, 1923 Hrs ............................................................$328,600 2012 VOLVO A35F, 2713 Hrs ............................................................$388,300 2010 VOLVO A40E, 3873 Hrs............................................................$339,200 (10) 2011 VOLVO A40F, 3784-6615 Hrs................$319,000-$383,000 (20) 2012 VOLVO A40F, 2462-5758 Hrs ..............$324,500-$447,000 (12) 2013 VOLVO A40F, 1575-4448 Hrs ..............$368,500-$473,000 (2) 2013 VOLVO A40F FS, 1875-2628 Hrs ..........$455,800-$484,000 2014 VOLVO A40G, 2285 Hrs ..........................................................$484,000

Excavators-Wheel (2) 2011 VOLVO EW180C, 3008-3308 Hrs ..........$161,200-$166,700 2012 VOLVO EW180D, 1785 Hrs ....................................................$194,500 2013 VOLVO EW180D, 1561 Hrs ....................................................$195,250

Motor Graders 2008 VOLVO G930, 6701 Hrs ..........................................................$121,000 2011 VOLVO G946B, 1985 Hrs ........................................................$211,200

Water Equipment - Truck 2006 CATERPILLAR 773, 11218 Hrs..............................................$242,000 2010 VOLVO A30, 3315 Hrs ..............................................................$275,000 2006 VOLVO A30D, 7500 Hrs ..........................................................$255,750

Full inventory at: www.ascvolvo.com

Wheel Loaders 2010 VOLVO L110F, 5350 Hrs ..........................................................$155,600 2011 VOLVO L110F, 6883 Hrs ..........................................................$136,400 (3) 2012 VOLVO L110G, 1651-4500 Hrs ..............$170,000-$233,200 (7) 2013 VOLVO L110G, 1900-3481 Hrs ..............$204,600-$226,600 2014 VOLVO L110G, 565 Hrs ..........................................................$249,700 2009 VOLVO L150F, 7338 Hrs..........................................................$183,400 (2) 2010 VOLVO L150F, 11436-13235 Hrs............$133,400-$133,500 2012 VOLVO L150G, 3065 Hrs ........................................................$267,000 2011 VOLVO L180G, 5330 Hrs ........................................................$278,000 2013 VOLVO L180G, 3800 Hrs ........................................................$334,000 2013 VOLVO L220G, 1600 Hrs ........................................................$413,400 (2) 2012 VOLVO L250G, 2425-3461 Hrs ..............$355,000-$399,000 2012 VOLVO L30B, 3706 Hrs ..............................................................$48,400 2013 VOLVO L60G, 1626 Hrs ..........................................................$144,000 2012 VOLVO L70G, 1960 Hrs............................................................$151,250 2013 VOLVO L70G, 2823 Hrs ..........................................................$147,000 (9) 2012 VOLVO L90G, 1189-3300 Hrs..................$165,000-$192,500 (20) 2013 VOLVO L90G, 473-4670 Hrs ................$147,400-$199,100

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 11

NORTH DAKOTA Bismarck 701.250.4882 Fargo 701.271.2360 Minot 701.839.4020 Williston 701.570.5309

GEORGIA Buford 678.318.9500 Forest Park 770.319.0074 Savannah 912.964.8079

SOUTH CAROLINA Charleston 843.414.1120 Columbia 803.791.0740 Piedmont 864.704.1060

NORTH CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710

TENNESSEE Chattanooga 423.308.7940 Knoxville 865.525.1845

You demand quality in your work. Your work demands quality in your machines.

Smart Works. At Volvo, we know that efficiency, reliability and productivity are crucial to your success. You have an important job to do, and our machines will help you get it done. Contact ASC Construction Equipment today for more information.

ascvolvo.com

Page 12 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

AGC of Minnesota ‘Bringing It Together’ at Annual Meeting

GC of Minnesota held its 95th Annual Meeting, “Bringing It Together,” on Jan. 15 at the Minneapolis Marriott in Minnetonka, Minn. Attendees, speakers, planning committee members, sponsors, exhibitors and raffle item donors all played important roles. Raffle winners of the event are as follows: Dave Borak (Orion Search Group Inc.), Spalon Montage basket and gift certificate; Jon Launstein (Bearence Management Group), a week at Breezy Shores resort; and Jim Fink (Associated Bank), two tickets to see Billy Joel and a gift certificate to Loews Hotel Sen. Susan Kent was presented with the 2014 Legislator of the Year award. Sen. Kent was elected for the first time in 2012 and serves District 53, representing Woodbury and the surrounding area. She currently serves as vice chair of the Senate Transportation Committee. Senator Kent was the chief Senate author of the Work Zone Safety bill. This legislation made the first substantive changes to Minnesota’s work zone safety laws in almost 20 years. It changes the way work zone speed limits are set in construction zones and includes a clearly stated minimum fine of $300 for speeding in Minnesota construction work zones. Rep. Ron Erhardt was recognized with the Award of Distinction for his many years of service not only to the state of Minnesota but specifically to the construction industry. Rep. Erhardt has served the Edina district as both a Republican and a Democrat. In the early 2000s, he began a quest to

address Minnesota’s growing transportation funding deficiency by proposing politically unpopular tax increases. In 2008, his efforts paid off when he and five other Republicans joined House Democrats in overriding the governor’s veto of a bi-partisan funding package. The package provided $6.5 billion in new funding over 10 years to begin addressing the backlog of transportation needs. His actions were seen as a betrayal of the Republican party, he was denied endorsement for reelection, and subsequently lost his seat. In November 2014, he was elected as a Democrat and is now serving his 10th non-consecutive term.

Sheila Ryan photo

Jim Dockstader, Enebak Construction Company, 2015 chair of AGC of Minnesota board of directors, addresses attendees.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Sheila Ryan photo

Gary Sauer (C), Tiller Corporation, recipient of the Lifetime Achievement Award, stands proudly supported by his family.

Sheila Ryan photo

Terry Hukriede, Adolfson & Peterson Construction, accepts the 2014 SkillResponsibility-Integrity Award. Sheila Ryan photo

Attendees gather to hear the opening keynote presentation.

Sheila Ryan photo

(L-R): Tim Worke, AGC of Minnesota; Dave Semerad, AGC of Minnesota; Rep. Ron Erhardt, recipient of the Career Award of Distinction; and Sen. Susan Kent, recipient of the 2014 Legislator of the Year Award.

Sheila Ryan photo

James Benham, JBKnowledge, opening keynote, welcomes attendees to the 95th Annual AGC of Minnesota Meeting.

Bob Sniegowski (L), CliftonLarsonAllen LLP, and Joe Egan, Egan Connection LLC, annual meeting planning committee co-chairs, helped ensure the event ran smoothly.

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ February 28, 2015 â&#x20AC;˘ Page 13

YOUâ&#x20AC;&#x2122;RE INVITED . . .

to our annual paving open house!

take advantage of special buying incentives, meet factory reps and take part in product demos.

find out whatâ&#x20AC;&#x2122;s new in paving RMS Rentals would like to invite you to our annual paving open house. Tuesday, March 17, 2015 | 9:00 am - 3:30 pm | Lunch from 11:00 am - 1:30 pm at RMS Rentals: 12520 Quentin Ave, Ste 100, Savage, MN 55378

0DUN 5RVVL Ă&#x201D; *HQHUDO 0DQDJHU Ă&#x201D; www.rmsrentals.com

RSVP to Laura Hannam at lhannam@rmseq.com | 952-895-7039

Page 14 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Scharber & Sons Celebrates Nearly a Century of Business

n Jan. 29, Scharber & Sons in Rogers, Minn., celebrated nearly 100 years of business with an open house. For more information, visit www.mnequipmentsolutions.com or call 763/428-4107.

Scharber & Sons celebrates 99 years.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

David “Donuts” Tieman (L), equipment operator of the city of Rodgers, listens as Dan Scharber, co-owner of Scharber & Sons, Rodgers, Minn., demonstrates the features of this John Deere 333E compact track loader.

(L-R): Dennis Westphal of Westphal Concrete out of Elk River, Minn.; James Melcher, Lands Pride territory manager out of Salina Kan.; and co-owner of Scharber & Sons, Mike Scharber, are show here with a FSP 700 spreader.

Midwest Landscapes Project Administrator Megan Barthel and Midwest Landscapes Maintenance Division Manager Shane Gardner check out a Toro spreader sprayer.

On hand to answer landscape supply questions are Jeff Hardy (L), irrigation department manager, and Don Lubrecht, outside sales representative, both of John Deere Landscapes.

Attendees sit through a seminar on a “Driver Fatigue Research Update,” “2014 Changes to Law,” “Continuing Education” and “Load Securement & Driving Restrictions.”

Checking out the controls on this John Deere 60G excavator is Bryan Lawrence of Rocket Oil & Rocket Turf.

Dale Shequen, Midwest product specialist of Ariens Gravely, stands with the brand new 2015 JSV-300 side-by-side utility vehicle. This unit comes in a gas or diesel model for 2015.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 15

JD 672G, Low Cab, Air, JD 844J, Cab, Air, 7.25 GP Bkt, #91799 ............ Rear Ripper, Front Scarifier, #75640 .......... ......................$185,000 ......................$209,000

JD 700K, LGP, 30” JD 544K, Cab, Air, Pin JD 600CLC, Genesis On 4.5yd Light Material GXP1200R, #74130 ...... Pads, 132” PAT Blade, ......................$468,000 #75510 ..........$163,000 Bkt, #75700 ....$129,000

Bomag BW213PDH-3, JD 225D, 9’ 7” Arm, 32” Pads, Mech Thumb, Cab, Air, 84” Padfoot, #92390 ............$85,000 #74575............$114,000

Low Hour JD 844K’s Available, 0% for 36 Months on Select Units

JD 800CLC, 14’ 5” Arm, JD 850K, 24” Pads, 36” Pads, #92100.......... 128” Semi U Blade, ......................$365,000 Ripper, Full Warranty, #75578 ..........$249,000

NPK Hammers, All Sizes for All Makes. Inspected and Well Maintained, GH4-GH18

JD 350GLC Material JD 750J, 24” Pads, Handler, #52129 .......... 128” Semi U Blade, ......................$495,000 Winch, #91792 .............. ......................$196,000

JD 350DLC, 13’1” Arm, JD 200DLC, 9’6” Arm, 32” Pads, #75023.......... Mech Thumb, #75428 .. ......................$179,000 ......................$149,000

Page 16 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ February 28, 2015 â&#x20AC;˘ Page 17

Â&#x160;Â&#x2022;Â&#x2022;Čą Â&#x2DC;Â&#x17E;Â? Call DougČąČŚ/Čą Â&#x160;Â&#x;Â&#x17D;ÇąČąČą Sam: (866) 485-7180

2005 Komatsu WA200-5: #92125, Cab/AC, JRB QC, Ride Control, LSD Axles, 5,000 hrs ....................$69,500

2002 Caterpillar 325CL: #92079, Cab/AC, 31.5â&#x20AC;? Tracks, QC, 12,100 hrs ......................................................$69,500

2001 Deere 310SG: #81783, OROPS, 4x4, Ext-A-Hoe, 2,500 hrs ..............................................................$32,500

1998 Caterpillar D6M XL: #81916, 2007 Deere 850J: #92030, Cab/AC, 24â&#x20AC;? 2007 Komatsu D39PX-21: #92130, 2003 Caterpillar D6R XL: #91695, Cab/AC, 24â&#x20AC;? Tracks, Sweeps, 14,500 hrs .. Cab/AC, 24â&#x20AC;? Tracks, Winch, 13,500 hrs .... Tracks, PAT Blade, Sweeps, 4,000 hrs ...... OROPS, 25â&#x20AC;? Tracks, PAT Blade, 3,650 hrs ............................................................$Call ......................................................$89,500 ....................................................$162,500 ......................................................$39,500

2007 Komatsu PC300LC-8: #81926, 2007 Komatsu PC200LC-8: #92043, Cab/AC, Hyd Thumb, QC, 5,000 hrs .......... Cab/AC, 10â&#x20AC;&#x2122; Arm, Rear Camera, 7,500 hrs ....................................................$112,500 ....................................................$149,500

2006 Komatsu PC220LC-7: #82120, 2004 Komatsu PC138USLC-2E0: Cab/AC, 31.5â&#x20AC;? Tracks, 10â&#x20AC;&#x2122; Arm, 6,550 hrs #81889, Cab/AC, Roadliners, Hyd Thumb, ............................................................$Call 4,400 hrs ......................................$79,500

2007 Komatsu D61PX-15: #82369, 2008 Komatsu D65EX-15E0: #81933, Cab/AC, 24â&#x20AC;? Tracks, Ripper, 5,600 hrs ...... Cab/AC, 34â&#x20AC;? Tracks, PAT Blade, 5,200 hrs ....................................................$149,500 ......................................................$99,500

2009 Komatsu PC160LC-7: #82212, 1992 Case 921: #92166, Cab, GP Bucket, Cab/AC, Mech Thumb, KOMTRAX, 3rd Valve, 10,200 hrs ........................$Call 5,750 hrs ......................................$84,500

Page 18 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

More Than 1,400 Attend AED Summit, Condex Show

he Associated Equipment Distributors (AED held its 2015 Summit and Condex show in Orlando, Fla., Feb. 10

to 13. The AED Summit and Condex is an annual convention designed specifically to provide equipment distributors with opportunities to see new products, meet with current and prospective business partners, attend educational seminars and network with dealer peers. More than 1,400 people attended; of that, 433 were equipment dealers. The Condex show was sold out with a total of 122 exhibitors with 45 exhibiting for the first time. During the event, Don Shilling was inducted as the new 2015 AED chairman. Shilling is president of General Equipment & Supplies Inc. and General Aggregates Equipment Sales, Fargo, N.D. Ken Taylor, owner of Ohio CAT, was presented with the AED Democracy Award during a special AED PAC reception During the event, U.S. Department of Transportation’s (DOT) Deputy Secretary Victor Mendez laid out the Obama administration’s ambitious highway reauthorization plan while encouraging equipment distributors to press for congressional action. Mendez emphasized the impact the federal highway program’s uncertainty on the construction industry while outlining the Obama administration’s Generating Renewal, Opportunity and Work with Accelerated Mobility, Efficiency, and Rebuilding of Infrastructure and Communities throughout America Act (the GROW AMERICA Act). The proposal increases surface transportation infrastructure funding over the next six years and “provides a strong investment in aging highways and bridges across the nation, to ensure that they are safe, reliable and well maintained.” Mendez highlighted the broad job creation and economic benefits of a robust, multiyear highway bill as well as the value

of public-private partnerships as tools for rebuilding the nation’s crumbling infrastructure. Recognizing AED’s top-tier advocacy program, the Deputy Secretary of Transportation implored attendees to urge lawmakers to take immediate and decisive action to restore certainty to federal surface transportation programs. From his own experience, Mendez recalled meeting with the Arizona congressional delegation while serving as the state’s top transportation official and used the memory to underscore the importance of constituent engagement, particularly at a local level. Small business owners and executives are powerful advocates. By educating Congress about AED’s policy priorities, equipment distributors can illustrate the needs of the entire industry. AED’s next Washington Fly-In will be June 3 to 4 when dealers will storm Capitol Hill as part Multione USA displayed its mini-loaders of the equipment industry’s premiere public that can be equipped with 170 attachments (L-R): Kevin Whitworth, Ryan policy event. see AED page 26

Zweerink, Chris Minton and Alex De Luca.

Keith McCann (L) and Brendan Fox of Terex Mobile Processing Equipment spoke with attendees about the company’s comprehensive line of mobile crushing, screening and recycling equipment.

Eamon McMahon (L) and Alistair Forsyth of Anaconda have crushers, screeners, scalpers, trommels and conveyors to meet every need.

Gorilla Hammers and Bob Tedesco have decades of experience in helping you match up your customer with the right hydraulic hammer.

Sullivan-Palatek brought its dual fuel G185 and Tier IV Final 185 with a Deutz engine compressor to the annual AED Condex (L-R): Tom Viskniskki, vice president of sales; David Smith, regional director; and Steve Van Loan, president.

Broce-Walden is firming up relationships with its U.S. distribution network during the AED conference. (L-R): Merle Patzkowsky, John Mortan, and Scott Wimmer, all of Broce-Walden; and Greg Schultz and Jock Cockroft of Glynn General Corp.

constRuction eQuiPment guide • www.constructionequipmentguide.com • february 28, 2015 • Page 19

coRPoRate HQ

elmHuRst

Joliet

oglesby

RockfoRd

Hammond

635 W. Lake Street eLMhurSt, iL 60126

16822 W. LaraWay rd. JoLiet, iL 60433

590 Mayer St. ogLeSby, iL 61348

5055 South Main St. rockford, iL 61102

6400 indianapoLiS bLvd haMMond, in 46320

call bobby falcone 630-516-4456 www.pattencat.com

USED EQUIPMENT SPECIALS

2012 CAT 279C 2AIRH MULTI TERRAIN LOADER SER#: MBT03093 $48,500

2005 CAT 304CR TRACK EXCAVATOR SER#: NAD02745 $25,000

2004 CAT 320CL TRACK EXCAVATOR SER#: PAB02161 $70,000

2006 325DL TRACK EXCAVATOR SER#: A3R00129 $110,000

ENGINE-TIER 3 COMPLIANT, STD FLOW HYD, QUICK COUPLER, SNOW TRACKS

QUICK COUPLER, AUX HYDRAULICS, RUBBER TRACK, OROPS

AUX HYD, AC, QUICK COUPLER

AUX HYD, CONTROL AND LINES, PIN GRABBER

2011 CAT 336DL TRACK EXCAVATOR SER#: W3K01378 $228,600

2012 CAT 336EL TRACK EXCAVATOR SER#: BZY00967 $268,750

2012 CAT 336EL TRACK EXCAVATOR SER#: BZY00973 $268,750

1998 CAT 345B TRACK EXCAVATOR SER#: 4SS00506 $58,000

CAB HEAT/AC, COLD WEATHER START, CERT EMISSIONS

QUICK COUPLER, COLD WEATHER START PKG, TOOL CTRL

QUICK COUPLER, COLD WEATHER START, TOOL CTRL

AC, COUNTER WEIGHT REMOVAL SYS, ENG ENCLOSURES

2005 CAT 345B TRACK EXCAVATOR SER# AGSO2621 $85,000

2011 KOBELCO LTD 235SR TRACK EXCAVATOR SER# YU06-03062 $149,900

2011 CAT 420E ST BACKHOE LOADER SER# DJL02211 $69,900

2006 CAT CB-224E DOUBLE DRUM SER# 22401752 $14,000

AUX HYD, AC, QUICK COUPLER, COMBINED FNCT

AC, AUX HYDRAULIC, QUICK COUPLER, THUMB, HYDRAULIC

EROPS, STICK, EXTENDED, QUICK COUPLER, 4WD, GP BUCKET, AUX HYDRAULICS

OROPS, BACK-UP ALARM, WATER SPRAY SYS, 150L WATER TANK

2005 CB 334E DOUBLE DRUM ROLLER SN# CF400228 $10,000

2006 CB 334E DOUBLE DRUM ROLLER SN# C3A00236 $15,500

OROPS, WATER SPRAY SYS, COCOA MATS

VISIT

WWW.PATTENCAT.COM

FOR OUR MOST CURRENT INVENTORY LISTINGS.

Page 20 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Every Komatsu Tier 4 construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filter exchanges. GO WITH KOMAT With Komatsu CARE you can:

>>>>>

Canadian Rural Municipalities Order SDLGs, Find Them Valuable to Fleets

GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.

TIER 4 INTERIM E

• Lower your cost of ownership MAINTENANCE B • Increase equipment uptime and reliability • Protect the value of your Tier 4 capital investment

y Komatsu T CARE complim

To learn more e about

It’s just part of our Program Komatsu designed to deliver complete CARE contact your 3 years, plus 2 c service and support solutions to Komatsu customers. Komatsu distributor or scan

thisCARE QR code Komatsu

To learn more about with your contact your Komatsu distributor or scan smart phone. this QR code with your smart phone.

Lower your c

Increase equ

Protect the va

It’s just part of ou solutions to Kom

MIDWEST KOMATSU DISTRIBUTORS

W E S T K O M AT S U D I S T R I B U T

Berry Tractor & Equipment Bacon-Universal Company, Inc Company, Inc.. www.berrytractor.com KS Garden City 620-277-2290 • 877-469-1763 Topeka 785-266-9509 • 877-469-1763 Wichita 316-943-4246 • 877-469-1763 MO Springfield 417-831-2651 • 877-469-1763

Hilo 808-935-8595 800-352-3508 Honolulu 808-839-7202 800-352-3508 Kailua-Kona 808-326-1212 800-352-3508 Kauai (Lihue) 808-245-8472 800-352-3508

Soldotna 907-262-5977 800-254-5977 Wasilla 907-376-3838 800-973-2607

Sarnia, a municipality in the Saskatchewan region, purchased an SDLG LG938L for its duties. The wheel loader is loading gravel for road projects and performing other tasks, such as snow removal and waste management for the region.

When it comes to government equipment, value and versatility are key. It’s for these reasons that SDLG wheel loaders are beginning to see more and more action in Canada, where municipalities are utilizing them for road projects and material handling. Sarnia, a municipality in the Saskatchewan region, purchased an SDLG LG938L for its duties. The wheel loader is loading gravel for road projects and performing other tasks, such as snow removal and waste management for the region. Kevin Fry, territory manager of Redhead Equipment, from which the machine was purchased, said that initially, Sarnia had been in the market for a used machine, but opted for a brand new SDLG wheel loader for its value pricing and solid warranty. “Sarnia doesn’t have to run a wheel loader 24/7, it just needs to complete individual projects in a timely manner, and needs a loader ready to go in a moment’s notice,” he said. “It may only get 300 hours of work this year, so it makes good sense for the region to purchase an SDLG wheel loader, which costs less than premium machines.” The LG938L being utilized in Sarnia is a 2.4 cu. yds. (1.8 cu m) bucket wheel loader with an operating weight of 23,150 lbs. (10,500 kg). It features a

Tier IV Deutz engine with 160 hp and 530 lb. ft of torque; ZF transmission; dry disc brakes; a hydraulic quick coupler and 3rd function hydraulics; a modern fit and finish with high visibility; and an operator-friendly cab. It also comes with a 12-month, 1,500-hour warranty. Caledonia, also in Saskatchewan, is another municipality that has chosen SDLG wheel loaders. Like Sarnia, the region purchased an LG938L, mostly for loading gravel for road projects. It’s working in gravel pits and utilizing the machine’s quick-attach forks for loading. Additionally, Caledonia will use the wheel loader for snow removal, come winter. Redhead Equipment was again the dealer which provided this latest SDLG unit. Ryan Marwick, territory manager of the region, said the municipality based its decision to buy SDLG on value pricing and the nature of the work. “The rural municipality of Caledonia was looking at several competing wheel loader options, but it just couldn’t justify spending twice as much money for a premium machine,” he said. “It’s only going to get some 500 hours of work each year, so it doesn’t need to run constantly to pay for itself. So far, the reports about the

machine are very positive, even comparing its quality to more expensive loaders sold by market leading North American brands — it’s a great bang for their buck.” Richard Linton, reeve of the municipality, said that the wheel loader has turned out to be a great purchase. “The RM of Caledonia is very impressed with the SDLG wheel loader,” he said. “It has performed above and beyond the RM’s expectations. We are happy with our decision to go with SDLG.” Al Quinn, director of SDLG, said that the company’s wheel loaders are ideal for government work, where price tends to weigh heavily. “When it comes to using tax money to pay for a region’s equipment, price is an extremely important factor. But that doesn’t mean that quality isn’t a huge consideration.” he said. “Governmental bodies want to purchase construction machines at a great price, but they have to be reliable and well-made, too. SDLG wheel loaders offer just that — quality and value pricing. For the same price as a used machine, they can purchase a brand new wheel loader backed by a great warranty.” (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

www.brandeismachinery.com IN Evansville 812-425-4491 Ft. Wayne 260-489-4551 Indianapolis 317-872-8410 KY Corbin 606-528-3700 Lexington 859-259-3456 Louisville 502-491-4000 Paducah 270-444-8390 Stanville 606-478-9201

Claremont Clar emont Equipment Co Co.. .clairemontequipment.com CA

Escondido 760-739-9100 Imperial 760-355-7700 San Diego 858-278-8351

Craig Taylor Equipment Cr Company ylorequipment.com

Oklahoma City 405-495-7820 800-375-3339 Tulsa 918-438-1700 800-375-3733 TX

Abilene 325-692-6334 877-577-5729 Amarillo 806-373-2826 800-283-1247 Dallas 214-371-7777 800-753-1247 Ft Worth 817-378-0600 877-851-9977 Lubbock 806-745-2112 866-289-6087

Komatsu Equipment Co. Co. tsueq.com

Anchorage 907-276-5050 800-279-5051 Fairbanks 907-452-1192 800-452-1192

Columbus Equipment www.columbusequipment.com OH Cadiz 740-942-8871 Canton 330-453-4521 Cincinnati 513-771-3922 Columbus 614-443-6541 Dayton 937-879-3154 Painesville 440-352-0452 Perrysburg 419-872-7101 Piketon 740-289-3757 Richfield 330-659-6681 Zanesville 740-455-4036

Continental Equipment Corp. www.ceceq.com MI Lansing 517-321-8000 MI - Continental Equipment Corp. Service Branches Bridgeport 989-777-0090 • 989-777-1583 Lenox 586-727-7502 • 586-727-7311 New Hudson 248-437-8121 • 248-437-9750 Williamsburg 231-267-5060 • 231-267-5257

Hurric 435-9 Salt L 801-9 South 801-9

Kirb Kirby-Smith y-Smith Mac Machinery hinery Inc Inc.. WY

Brandeis Machinery & Supply Company Wailuku Maui 808-244-9158 800-352-3508

Elko 775-753-7561 North Las Vegas 702-399-1004 Reno 775-356-1334

Gillett 307-6 Rock S 307-6

Mode ID

Boise 208-3 800-2 Pocate 208-2 800-8 MT

Billing 406-2 800-7 Kalisp 406-7 800-4 Misso 406-5 800-3 OR

Eugen 541-6 800-8 Portla 971-2 800-9

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 21

Diesel Machinery, Inc. www.dieselmachinery.com SD Aberdeen 605-725-4364 • 888-762-6312 Rapid City 605-348-7438 • 800-658-3047 Sioux Falls 605-336-0411 • 800-456-4005

General Equipment & Supplies www.genequip.com ND Bismarck 701-223-9700 • 800-279-4437 Fargo 701-282-2662 • 800-437-2924 Minot 701-852-0479 • 800-852-0479 Williston 701-572-0570

Road Builders Machinery & Supply Co., Inc. www.roadbuildersmachinery.com KS Kansas City 913-371-3822 NE Grand Island 308-384-2620 Lincoln 402-325-0447 Omaha 402-331-9200

Road Machinery & Supplies Co. www.rmsequipment.com IA Cedar Rapids 319-363-9655 • 800-616-6615 Des Moines 515-282-0404 • 800-555-1445 Sioux City 712-252-0538 • 800-633-9104 IL Milan 309-787-1742 • 800-633-9114 MN Duluth 218-727-8611 Savage 952-895-9595 • 800-888-9515 Virginia 218-741-9011 • 800-752-4304

Roland Machinery Co. www.rolandmachinery.com IL Bolingbrook 630-739-7474 Carterville 618-985-3399 Marengo 815-923-4966 Springfield 217-789-7711 IN Portage 219-764-8080 MI Escanaba 906-786-6920 MO Bridgeton 314-291-1330 Cape Girardeau 573-334-5252 Columbia 573-814-0083 Palmyra 573-769-2056 WI DeForest 608-842-4151 DePere 920-532-0165 Eau Claire 715-874-5400 Franksville 262-835-2710 Schofield 715-355-9898

www.komatsuamerica.com/komatsu-care

Page 22 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

(262) 781-3770 Jim King Mobile: (414) 530-0592 13001 W. Silver Spring Drive Butler, WI 53007

SEE PHOTOS

OF OUR

Fax: (262) 781-5053 Email: jking@aring.com

COMPLETE INVENTORY

AT WWW.ARINGEQUIPMENT.COM

2013 Volvo L110G, 113" 4.1 cy bkt, 23.5R25 tires, full fenders, block heater, reversible cooling fan, radio w/cd, rear camera, hyd 3 functions, boom suspension, logging counterweight ...... ..................................................................................$242,500

2011 Volvo DD138HF - Back up alarm, infrared temp sensor, work lights, 328 gal water tank cap, operating weight 30,325 lbs, vibrating frequency: 3200 vpm, vibration centrifugal force: 21,840-42,260 lbs, 84" drum width ................................CALL

2007 Volvo L350F, Cab, A/C, Radio w/CD, Air Suspension Seat, Comfort Drive Control, Work Lights, Boom Suspension, Engine Block Heater, Auto Lube System, Full Rear Fenders, 156” 10.1cy Spade Nose Rock Bucket w/Teeth & Segments, 35/65R33 Tires 80% ..................................................$185,000

2012 Volvo ECR58, 16” Rubber Tracks, Auto Idling, Heat/AC, Pilot Controls, Counterweight ......................................$65,000

2007 Volvo EC240BLC, A/C, Radio, Air Susp Seat, 36" Pads, 19'8" Boom, 9'9" Stick, Hammer/Shear Piping, Q/C Piping, Engine Block Heater, PPCC, Hyd Thumb, Bucket ......$96,500

2007 Volvo L70F, Cab, A/C, Radio w/CD, Operator’s Seat w/Left Hand Armrest, Sliding Window Operator’s Door, Work Lights, Boom Suspension, 3rd Function, Hydraulic Attachment Bracket, Reversible Cooling Fan, Engine Auto Shutdown, Reverse Alarm, Rotating Beacon, Rear Frame Cover Plates, Full Rear Fenders, 100” 2.9cy Bucket w/BOE, 20.5R25 Tires ..................................................................................$110,000

2012 Volvo A40F, A/C, Radio w/CD, Automatic Traction Control, Heated Air Susp Seat w/Armrest, Front Work Lights, Volvo D16H (476hp) Tier 4i Engine, Rear View Color Camera, Electric Hood Opener, Delayed Engine Shutdown, Engine Block Heater, CareTrack Telematics System, 29.5R25 Michelin XADN Tires ................................................................$440,000

2012 Volvo EC340DL, 21'2" boom, 10'6" arm, air suspension seat w/heat & X iso, radio w/cd & mp3, climate control w/ac, rotating beacon, quick fit piping, engine block heater, work lights, rear camera, pilot pattern controls, boom float function ..................................................................................$195,000

2008 Ingersoll Rand PT240R, 78” Pneumatic Tire Compactor, Orops, Dual Operator Station, Cummins BT4.5C99 Engine (99hp), Powershift, Differential Lock, Pressurized Water System w/Cocoa Mats, (8) 11.00X20 18ply Tires ..............................................................................$69,500

2011 Volvo L220G, A/C, Radio w/CD, Heated Air Susp Seat, Rear Camera, Electro-Hydraulic Servo Controls, OptiShift, Comfort Drive Control, Boom Suspension, Work Lights, Reversible Cooling Fan, Axle Oil Cooling, Engine Block Heater, Full Rear Fenders, Re-Handling Counterweight, CareTrack Hardware, 134” 8.2cy STE Bkt w/BOE, 29.5R25 Michelin L-4 Tires, Volvo D13H-F (Tier 4i) ....................................$260,000

2011 Volvo SD116DX, Work lights, flow divider, bolt on pad foot shell, inside scrapper, universal scrapper, grill support installation, operating weight 23,930 lbs, vib frequency 1,870-2,018 2012 Cat D6T XLVP, Erops, A/C, Air Suspension Seat, vpm, vibration centrifugal force: 47,900-61,000 lbs, 84" drum Electro- Hydraulic Differential Steer, Work Lights, 3rd Valve, width ............................................................................$99,500 24” ES Pads, VPAT Blade, Winch ..............................$280,000

2012 Volvo L250G, 875/65R29 L4 Good Year tires, eng auto shutdown, eng block heater, radio w/cd, rear camera, comfort drive controls, boom suspension, 140" 8.8CY bkt......$440,000

2011 Volvo L220G, A/C, Radio w/CD, Heated Air Susp. Seat, Rear Camera, Electro-Hydraulic Servo Controls, OptiShift, Comfort Drive Control, Work Lights, Boom Susp., Reversible Cooling Fan, Axle Oil Cooling, Engine Block Heater, Rotating Warning Beacon, Full Rear Fenders, Re-handling Cntrwt, CareTrack Hardware, 135" 7cy SPN Bucket w/Teeth & Segments, 29.5R25 Michelin XLD D1 L-4 Tires ........$255,000

2012 Volvo EC300DL, 20'4" boom, 12'2" arm, 36" triple grouser pads, air suspension seat w/heat, radio w/cd, rear camera, quick fit piping, pilot pattern controls, straight travel pedal, boom float function..........................................$179,500

2008 Volvo A40E, A/C, Radio w/CD, Air Suspension Seat w/Armrest, Front Work Lights, Elec Hood Opener, Delayed Engine Shutdown, 29.5R25 Tires ..............................$298,000

WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL BREK ZORTMAN (414) 750-3351 FOR MORE INFO.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 23

SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

WE STAND ST TA READY. READ Y.

Page 24 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

I-35 & Hwy 60W • Faribault, MN Give Paul, Herb or Blake a Call Today

507-334-2233

2014 Quadtrac 580 Scraper Version, 505 Hrs, Big Hyd Pump, HD Tracks........................$339,900

Ashland I-200..........$69,900

2014 Quadtrac 500 Scraper Version, 404 Hrs, Twin Pumps, HD Tracks........................$319,900

‘08 ‘12 ‘14 ‘14

2008 Quadtrac 535 Scraper Version, 2762 Hrs, Leather, Very Nice..................................$189,900

CIH Steiger 535 Quad, 2762 hrs..........................$189,500 CIH Steiger 550 Quad, 1245 hrs..........................$269,900 CIH Steiger 500 Quad, 404 hrs............................$319,900 CIH Steiger 580 Quad, 505 hrs ..........................$339,900 All have: Scraper Version, leather cab, susp cab, big hyd pump, hid lights, Diff Lock Large Rental Inventory 550 Quadtracs & Scrapers

ASHLAND I-200 22946 2012 ........................................$69,900 ASHLAND I-200 22947 2012 ........................................$69,900 REYNOLDS 17E 34975 2006 ......................................$49,500 REYNOLDS 17E 35093 2006 ......................................$49,500 REYNOLDS 17E 35096 2006 ......................................$46,800

www.matejcek.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 25

0% for 48 Mo nths* Expires 6/30/1 5

Maximize Productivity Stop in and see our complete line of John Deere E-Series Skid Steers, and 204K, 304K, and 244J Compact Loaders. Each comes standard with quiet heated cabs that keep winter on the outside while delivering virtually unobstructed visibility from the inside. And all can be equipped with our Worksite Pro™ buckets, angle brooms, and snow pushers, blades, and blowers. Best of all, we provide a wealth of resources to keep you running at peak effciency for years to come — including dependable parts support, factory-trained technicians, and customized fnancial services. Ask for a demo today. Contact us today.

RDO Equipment Co. Ryan Miller Burnsville, MN 952-890-8602 *Offer ends June 30, 2015. Subject to approved installment credit with John Deere Financial. Offer includes new John Deere Skid Steers, Compact Track Loaders and Compact Excavators.Some restrictions apply. 0% APR for 42 months is available on new John Deere Compact Loaders. Other offers available. See dealer for complete details and other financing options. Available at participating dealers.

Scharber & Sons Rogers, MN 763-428-4107

Chris Conrad Rochester 507-282-8888

Isanti County Equipment Isanti, MN Jesse Kraft 763-444-8873

www.rdoequipment.com

www.mnequipmentsolutions.com

Page 26 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

AED Inducts Don Shilling as New 2015 Chairman at Event AED from page 18

see AED page 50

HydrauliCircuit Technology are experts in the field of hydraulic kits for excavators and backhoes.

(L-R): Sean Donaghy, Ken Taylor, Dan Davis and Thomas Jordan spoke with attendees about the company’s crushing and screening equipment.

Featured at the AED Condex, was a Hydrema truck equipped with a water tank from Curry Supply. (L-R): Barry Ferrell of Hydrema, Alan Patterson of Alberta Construction Equipment, Tom Schnackenberg of Curry Supply, Kris Binder of Hydrema, Sterling Roberts of Hydrema and Tom Hartman of Hydrema.

If your customers are dealing with closed asphalt plants, potholes or need portable asphalt plants to process recycled asphalt, Pavement Recyclers can help you help them.

Salvatore LaCorte of Allied Construction Products discussed his company’s line of attachments.

Looking over the CEG Midwest Edition are Doug Murray (L) and Brian McCoy of RoadBuilders Machinery & Supply Company Inc., with locations in Kansas, Nebraska and Missouri.

Construction Equipment Guide published a 25th anniversary supplement for Illinois Truck in 2014. Adam Salinas (L) and David Welter show off a copy.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 27

YOUR SOURCE FOR

SALES AND RENTALS CRAWLER TRUCKS, STUMP CUTTERS AND FORESTRY MULCHERS

LSC LIGHT TOWER • Kubota D1005bg Engine • Tier 4 Final Emissions • Water Cooling System • 28 Gallon Diesel Fuel System • 6kW Prime Power Rating, 60Hz, 1.OPF • 120 Available Voltage Single Phase

Call ASC Construction Equipment for Rental Rates at 701.250.4882 800.392.2686

NORTH Bismark Fargo Minot Williston

DAKOTA 701.250.4882 701.271.2360 701.839.4020 701.570.5309

Portable Power

Page 28 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

PUT THE POWER OF TITAN to work for you

PARTS • SERVICE • RENTALS • SALES

855-44TITAN titanmachinery.com

Serving Midwest Farmers...

JCB Network Grows With Addition of Roeder Bros JCB Roeder Bros JCB has become a member of JCB’s growing North American dealer network. In business since 1938, Roeder Bros has provided Midwestern farmers and ranchers with quality machines, parts and service. Now, as Roeder Bros JCB, the company will sell and service JCB’s agricultural products from its locations in Bellevue, Iowa, and Maquoketa, Iowa, including wheel loaders, telescopic wheel loaders, telescopic handlers, skid steer loaders and compact track loaders. For more than 75 years, Roeder Bros has been a strong presence in the eastern Iowa agricultural market. Over the years, Roeder Bros grew to more than 30 employees and achieved a 2014 Profit 500 ranking as one of the United States’s fastest growing companies. “We believe that our new association with JCB uniquely positions us for additional success in this part of the country,” said Nick Roeder, CEO of Roeder Bros JCB. “Our sales team has tremendous experience in the

ag market, and the customer relationships we’ve developed over the years will continue to serve us well. Our parts and service employees are being fully trained on JCB’s product line, and we look forward to introducing our current and future customers to the quality machines that only JCB can provide.” “Roeder Bros has demonstrated a true dedication to the agricultural industry throughout its long history in eastern Iowa,” said Dan Schmidt, JCB North America’s vice president of agriculture. “They embody the qualities we look for in a new JCB dealer — team spirit, proven sales success, excellent communication skills and the ambition to grow their market share. For all these reasons, we’re pleased to bring Roeder Bros JCB on board.” For more information, visit www.roederbrosjcb.com.

Vermeer Hosts Open House

On Feb. 6, Vermeer Midwest in Chesterfield, Mo., opened its doors to customers for an all-day open house.

On Feb. 6, Vermeer Midwest in Chesterfield, Mo., opened its doors to customers for an all-day open house. Event attendees enjoyed guided tours, equipment on display, and educational sessions from partnered vendors. While the building opened five years ago, Vermeer Midwest recently underwent a remodel to add a Training Center to the facility. “We have become more intentional about (This story also can be found on customer and employee training,” said Chad Construction Equipment Guide’s Web site at Van Soelen, general manager. “The new www.constructionequipmentguide.com.) Training Center will allow us to invest in

people; making them equipped to do more on and off the job.” Vermeer Midwest is an authorized dealer of Vermeer underground construction, tree care and environmental equipment. The dealership group was established in 1971 in Eureka, Ill., and has since grown to a ninestore network spanning Illinois, Indiana, Missouri and Michigan. For more information, visit vermeermidwest.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 29

.com

2012 CATERPILLAR 299D, ID# NUC0183, S/N HCL00267, 1383 HOURS, EROPS, A/C ..................$61,000

2011 CATERPILLAR 262C, ID# NUC0288, S/N MST03882, 3874 HOURS, OROPS, HIGH FLOW $25,000

2010 CATERPILLAR 299C, ID# NUC0237, S/N JSP01089, 2879 HOURS, EROPS, A/C , HIGH FLOW............................ ............................................................................................$48,600

2002 CATERPILLAR 304.5, ID# NUC0156, S/N WAK00357, 3002 HRS, OROPS ................................$22,800

2011 CATERPILLAR 259B3, ID# NUC0332, S/N YYZ00756, 1584 HOURS, EROPS, A/C....................$35,200

2012 CATERPILLAR 279C, ID# NUC0292, S/N KWB00537, 2074 HOURS, EROPS, A/C, 2 SPEED$47,800

2009 CATERPILLAR 140M, ID# NUC0133, SN# B9D01845, 5775 HRS ........................................$160,700

2010 CATERPILLAR 336DL, ID# NUC0395, S/N W3K01210, 6460 HOURS, EROPS..........................$154,400

2009 CATERPILLAR D7R, ID# NUC0217, S/N# AEC02154, 13,825 HRS....................................$165,900

2009 CATERPILLAR 12M, ID# MUC0321, S/N B9F00371, 4870 HOURS, CAB, AIR ............................................$144,700

1996 CATERPILLAR CP323C, ID# NUC0420, S/N 6DM00104, 2254 HOURS, OROPS ..........................$22,900

2008 CATERPILLAR 232B2, ID# NUC0236, S/N SCH03212, 2105 HOURS ............................................$19,900

2011 CATERPILLAR D6T, ID# NBU0110, S/N GMK00101, 1805 HOURS, EROPS..........................$256,000

2012 CATERPILLAR 14M, ID# NUC0061, R9J00536, 4045 HOURS............................................................................$327,800

2013 CATERPILLAR 289C2, ID# NUC0181, SN# RTD00890, 750 HRS ............................................$57,900

2005 CATERPILLAR 963C, ID# NUC0078, BBD01460, 8665 HOURS....................................................................$88,900

Kansas City (844) 845-8814 • Wichita (866) 773-5581 • FoleyEQLeads@FoleyEQ.com • (316) 934-4211 International

Page 30 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Komatsu Kenworth T880 with Tri-Axle Lowboy, 1:50 Scale - $135

Link Belt 800X2 Excavator, 1:50 Scale - $180

Caterpillar 994 Wheel Loader, 1:50 Scale - $215

Caterpillar 980G Military Wheel Loader, 1:50 Scale - $60

Allis-Chalmers Yellow HD21 Dozer w/Ripper, 1:50 Scale ...... $85

Caterpillar MH3049 Material Handler w/magnet, 1:50 Scale $150

Komatsu D65 EX-17 Dozer w/Ripper 1:50 Scale ......................$80

Bobcat E35 Compact Excavator, 1:25 Scale ............................$50

Caterpillar 336D L Excavator, 1:50 Scale ..................................$95

Komatsu D155AX Dozer w/ripper, 1:50 Scale ..........................$95

Bobcat E55 Compact Excavator, 1:25 Scale ............................$60

Caterpillar D350D Articulated Dump Truck, 1:50 Scale ..........$50

Komatsu D375A Dozer, 1:50 Scale............................................$125

Bobcat M400 Gold Skid Steer Loader, Scale 1:25 ..................$25

Caterpillar 365B L Series II Excavator, 1:50 Scale....................$75

Komatsu D475A Dozer w/ripper, 1:50 Scale............................$160

Bobcat S510 Skid Steer Loader, 1:25 Scale ..............................$65

Caterpillar 416 Backhoe/Loader (NZG), 1:50 Scale..................$75

Bobcat S570 Skid Steer Loader, 1:25 Scale ..............................$65

Caterpillar 428B Backhoe/Loader(NZG), 1:50 Scale................$75

Bobcat T550 Track Loader, 1:25 Scale ......................................$70

Caterpillar 428C Backhoe/Loader (NZG), 1:50 Scale ..............$75

Bobcat 225 Compact Excavator, 1:25 Scale ............................$50

Caterpillar 953 Traxcavator, NZG, 1:50 Scale............................$90

Bobcat 743 Skid Steer Loader, 1:25 Scale ................................$45

Caterpillar 963D Track Loader, 1:50 Scale ................................$60

Case CX250C Excavator, 1:50 Scale ........................................$195

Caterpillar 988K w/ Grapple, 1:50 Scale ..................................$160

Case 1102 Vibromax Roller, 1:35 Scale......................................$75

Demag Tracked Paver (NZG), 1:50 Scale ..................................$75

Komatsu WH613 Telehandler, 1:50 Scale ..................................$65

Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy Trailer,

Doosan Moxy MT31 Articulated Truck ....................................$100

Kubota KX080-4 Compact Excavator, 1:18 Scale ....................$60

1:50 Scale ......................................................................................$100

Dynapac SD2500 CS Road Paver, 1:50 Scale ........................$150

Kubota SVL90-02 Track Loader, 1:18 Scale ..............................$60

Caterpillar 225 Excavator, 1:50 Scale ........................................$40

Grove GMK 3050 All Terrain Crane, 1:50 Scale ......................$120

Liebherr LTM 1025 Mobile Crane, 1:50 Scale..........................$125

Caterpillar 428 Backhoe w/Hammer, 1:50 Scale ......................$70

Grove RT750 Rough Terrain Crane, 1:55 Scale......................$100

Link Belt 210X3 Excavator, 1:50 Scale ......................................$50

Caterpillar 769C Off-Highway Truck(NZG), 1:50 Scale ..........$115

Grove TM1500 White 12 Axle Crane, 1:50 Scale ....................$140

Link Belt 250 X3 Excavator, 1:50 Scale....................................$160

Caterpillar 775G Off-Highway Truck, 1:50 Scale ....................$110

Hamm 3414 Pad Foot Compactor, 1:50 Scale ..........................$90

Caterpillar 777D Off-Highway Truck, 1:50 Scale ......................$70

International 175 Crawler Loader, 4in1, 1:50 Scale..................$65

Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale ............$65

International TD-15 Dozer w/Umbrella, 1:50 Scale ..................$60

Caterpillar D7E Track-Type Tractor, 1:50 Scale ........................$90

John Deere “BO” Lindeman Crawler Tractor, 1:16 Scale ......$70

Caterpillar D8N Track-Type Tractor (NzG), 1:50 Scale ..........$150

John Deere 315SJ Backhoe/Loader, 1:50 Scale ......................$40

Caterpillar D10N Track-Type Tractor, 1:50 Scale ......................$50

John Deere 420 Dozer, 1:16 Scale ..............................................$60

Caterpillar D10 Track-Type Tractor (Conrad), 1:50 Scale......$185

John Deere 624J Military Wheel Loader, 1:50 Scale................$40

Vogele MT3000 Powerfeeder, 1:50 Scale ................................$140

Caterpillar D10T Track-Type Tractor, 1:50 Scale ......................$95

John Deere 850K Dozer, 1:50 Scale............................................$65

Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ....................$115

Caterpillar D11N Track-Type Tractor (Conrad), 1:50 Scale ..$185

Komatsu CK25 Compact Track Loader, 1:50 Scale ................$45

Volvo L220G Wheel Loader, 1:50 Scale ..................................$120

Caterpillar D11R Track-Type Tractor, 1:50 Scale ....................$100

Komatsu D51 EX Dozer, 1:50 Scale ............................................$85

Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale......$120

Komatsu GD655 Motor Grader, 1:50 Scale................................$90 Komatsu HM400-3 Articulated Truck, 1:50 Scale ..................$100 Komatsu WA470-7 Wheel Loader, 1:50 Scale ..........................$75 Komatsu WA500 Wheel Loader, 1:50 Scale ..............................$75 Komatsu WB146 Backhoe/Loader, 1:50 Scale ........................$75

Link Belt S-90 Excavator, 1:40 Scale ........................................$110 New Holland DC180B Dozer, 1:50 Scale ....................................$50 O&K RH9 Excavator, 1:50 Scale..................................................$85 Poclain TC45 Excavator, 1:50 Scale ........................................$140 Terex 33-07 Off-Highway Truck (NZG), 1:40 Scale ..................$90

Shipping and Handling Included

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 31

PRICE REDUCED EQUIPMENT SPECIALS 2013 Wacker 6503 Excavator, 87hrs, Hydro AWD, Thumb, 30” Bucket, Clean ......................................................................$72,000 2014 Wacker 6003 Excavator, 108hrs, Thumb, 30” Bucket, Very Clean....................................................................................$66,000 2009 Wacker 3503 Excavator, 475 hrs, 24” Bucket, Ready to Go .. ............................................................................................$34,000 2008 Wacker 3503 Excavator, 827 hrs, Thumb, 24” Bucket, A must See..............................................................................$37,000 2008 Wacker 1404 Excavator, 525 hrs, 12”Bucket, Price Right ...... ............................................................................................$19,000 2010 Wacker 1404 Excavator, 344 hrs, 12” Bucket, Handy Unit .... ............................................................................................$21,000 2014 Wacker ET20 Excavator, NEW, 20” Bucket, Great for Small Spaces ................................................................................$34,000 2014 Wacker 803 Excavator, NEW, 12” Bucket, Fits thru 36” Doorway ..............................................................................$22,000 2013 Wacker WL37 Wheel Loader, 150 hrs, Cab, Air, Heat$59,999 2013 Wacker WL36 Wheel Loader, NEW, Cab, Air, Heat ..$51,000 2015 Wacker WL32 Wheel Loader, New, Cab, Air, Heat ....$47,750 2014 Wacker RD12A Ride on Roller, Honda Engine, New $14,500 2014 Wacker ST35 Track Skid Loader, 42 hrs, Radial CTL, Comfort Cab, Radio ............................................................$54,000 2014 Wacker ST35 Track Skid Loader, NEW, Radial CTL, Comfort Cab ......................................................................................$54,000 2014 Wacker SW24 Wheel Skid Loader, NEW ..................$37,700 2014 Wacker SW28 Wheel Skid Loader, NEW ..................$39,500

MUELLER IMPLEMENT & RENTAL PHONE:

2009 Wacker 38z Excavator, 255hrs, New Thumb, 18” Bucket ..................................................$35,600

2008 Wacker WL25 Articulated Wheel Loader, 542 hrs, 2500lbs Lift, 54” Bucket ......................$25,000

2009 Wacker 1001 Wheel Dumper, 1 Metric Ton, 4wd, Articulates ..........................................$16,000

608-935-2751

4948 Hwy YZ Dodgeville, WI 53533 Email: muelleri@frontier.com

www.muellerrental.com

2008 Wacker 3001 Wheel Dumper, 301hrs, 3 Metric Ton, 4wd, Articulates ........................$29,000

PIRTEK Celebrates Opening of Its 50th U.S. Location PIRTEK, a leader of onsite hose replacement service that is dedicated to minimizing equipment downtime due to hose failure, opened its 50th Hose Service & Supply Center in Menomonee Falls, just northwest of Milwaukee, Wis., on Feb. 2. Owner Tom Fechter brings 17 years of experience in the hydraulic industry to his new business. Knowing the demand for PIRTEK in his local market, Fechter said he knew companies would benefit from the second-to-none service PIRTEK provides. “A hose failure is a big deal for a lot of local industries. Crews standing around waiting for a technician or replacement part can be a waste of time and money, so it's our job to make sure things are fixed and production resumes as efficiently as possible,” said Fechter. PIRTEK Menomonee Falls is conveniently located on Lilly Road in Menomonee Falls. Customers will have easy access to the new Hose Service & Supply Center where custom built high pressure hoses can be made over-the-counter, while they wait. Carrying a wide range of inventory which includes 3600, 5000 and 6000 P.S.I.

hydraulic hoses, quick disconnect couplings, adapters, hose clamps, pressure wash hoses, nozzles and wands, pressure gauges and 50 ft. (15 m) utility hoses will make PIRTEK Menomonee Falls a one stop shop for many local companies. The Hose Service & Supply Center also will act as a home base for three onsite mobile hose workshops that are available 24/7. Just one call to PIRTEK Menomonee Falls will get a fully trained hose service technician on their way to a job site within one hour. Each onsite hose workshop is fully equipped and stocked to manufacture hose assemblies on the spot. Onsite service is available around the clock by calling 262/345-9900. The Hose Service & Supply Center, located at W140N5955 Lilly Road in Menomonee Falls, is open Monday through Friday, 7:30 a.m. to 4:30 p.m. and Saturday from 8 a.m. to noon. For more information, visit www.pirtekusa.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Ashland, WI 715.682.5522

Mosinee, WI 715.693.3820

Grand Rapids, MN 218.326.9427

Richmond, KY 859.623.2030

Chippewa Falls, WI 715.834.2924

Duluth, MN 218.722.7456

Escanaba, MI 906.789.9054

Bowling Green, KY 270.842.3400

Monico, WI 715.487.5583

Bemidji, MN 218.759.1996

Louisville, KY 502.253.3721

London, KY 606.862.8447

Page 32 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mid Country Machinery (800) 206-5936

3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302 4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710 106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470

www.midcountrymachinery.com

2012 DEERE 850K WT, EROPS, 809 hrs. ....................$285,000

2011 Kawasaki 65ZV-2, EROPS, Heat, 3694 hrs...........$87,500

2011 CATERPILLAR 928H............................................$126,000

EXCAVATORS

DOZERS

2015 LINKBELT 160EX, EROPS, A/C, Heat................................................................................................$CALL 2015 KOBELCO SK 210 LC9, EROPS, 8 units avail ..................................................................................$CALL 2015 KOBELCO SK140SR, EROPS, A/C, 2 units avail ..............................................................................$CALL 2014 KOBELCO SK 500 LC9, EROPS, A/C, 2 Hrs......................................................................................$CALL 2014 KOBELCO SK350LC-9, Wounded Warrior Unit ................................................................................$CALL 2014 KOBELCO SK 210LC9, EROPS, A/C, 3 units ....................................................................................$CALL 2014 SANY SY 235C, EROPS, A/C, Heat, 14 Hrs ................................................................................$159,500 2013 KOBELCO SK 295-LR-9, EROPS, Long Reach ............................................................................$238,500 2013 KOBELCO SK 260LR-9, EROPS, Long Reach..............................................................................$243,000 2013 KOBELCO SK 210LC-9, EROPS, A/C, Heat ..................................................................................$159,500 2013 KOBELCO SK 140SR, EROPS, Blade, Aux Hyd............................................................................$143,000 2013 SANY SY 215C, EROPS, A/C, Heat, 521 Hrs ..............................................................................$129,900 2013 SANY SY 135C, EROPS, A/C, Heat, 213 Hrs ................................................................................$96,000 2012 KOBELCO SK350LC-9, EROPS, A/C, 1025 Hrs............................................................................$240,000 2012 KOBELCO SK 260LC9, EROPS, A/C, Heat, 842 Hrs ....................................................................$167,500 2012 KOBELCO SK 140SR LC, EROPS, A/C, 154 Hrs ..........................................................................$128,500 2012 KOBELCO SK 210LC-9, EROPS, A/C, 1500 Hrs ..........................................................................$122,500 2012 SANY SY 135C, EROPS, Aux Hyd., A/C, 521 Hrs ............................................................................$CALL 2011 KOBELCO SK 295, EROPS, Aux Hyd, 1636 Hrs ..............................................................................$CALL 2008 CASE CX160B, EROPS, Pattern Changer, A/C ..................................................................................$CALL 2007 KOBELCO SK 350LC-8, EROPS, A/C, 5599 Hrs ..........................................................................$105,000 2007 KOBELCO SK 250, EROPS, A/C, Heat, 4622 Hrs ........................................................................$120,000 2007 KOBELCO ED150, EROPS, A/C, Heat, 1727 Hrs ..........................................................................$102,500 2006 HITACHI ZX120, EROPS, A/C, Heat, 3175 Hrs ..............................................................................$68,500 2006 KOBELCO ED150, EROPS, A/C, Heat................................................................................................$CALL 2005 KOBELCO SK 160LC, EROPS, A/C, Heat, 2400 Hrs ......................................................................$67,500 2002 DEERE 270C, EROPS, A/C, Heat ......................................................................................................$CALL 1997 HITACHI EX200LC-5, EROPS, A/C, Heat ..........................................................................................$CALL

2014 CAT D6T XL, EROPS, 6SU Blade, MS Shank....................................................................................$CALL 2013 DEERE 550K XLT, EROPS, 6 way, 776 Hrs ..................................................................................$115,000 2012 CAT D6K XL, EROPS, 6 way, A/C, 1971 Hrs................................................................................$145,000 2012 DEERE 850KWT, EROPS, SU Blade, 899 Hrs ..............................................................................$285,000 2011 CAT D7E, EROPS, A/C, Heat ........................................................................................................$329,000 2011 CAT D6T XL, EROPS, Rear Screen, Winch ..................................................................................$240,000 2011 CAT D3K XL, EROPS, 6 way, 16”Pads ..........................................................................................$95,000 2011 KOMATSU D65-16, EROPS, SU Blade, 3366 Hrs ........................................................................$170,000 2011 CAT D6T XW, EROPS, Heat, A/C, 3479 Hrs ................................................................................$193,000 2008 CAT D6T XL, EROPS, Rear Hyd Draw Bar, 913 Hrs ....................................................................$230,000 2008 CAT D6T XL, EROPS, SU Blade, Ripper, 4731 Hrs ......................................................................$186,500 2008 CAT D6T XL, EROPS, SU Blade, A/C, 4787 Hrs ..........................................................................$195,000 2008 CAT D6T XW, EROPS, Sweeps, System One UC ........................................................................$160,000 2007 CAT D6T LGP, EROPS, St. Bld w/tilt, 1911 Hrs ..........................................................................$187,000 2006 CAT D6R XLIII, EROPS, 6 way, Sweeps, 6864 Hrs......................................................................$142,500 2005 CAT D6R XLII, EROPS, SU Blade, 7560 Hrs................................................................................$123,500 2005 CAT D6R XWII, Aux Hyd., Sweeps, A/C, 8796 Hrs ......................................................................$130,000 2005 DEERE 650J, OROPS, 6 way, S.A.L.T., 1478 Hrs ..........................................................................$55,000 2005 DEERE 450J LGP, OROPS, 6 way, 3933 Hrs ................................................................................$43,500 2004 CAT D6R XWII, EROPS, A/C, Drawbar, 12,845 Hrs ....................................................................$117,500 2003 CAT D8R II, EROPS, New U/C, SU Blade ....................................................................................$180,000

WHEEL LOADERS 2014 KAWASAKI 80Z7, EROPS, A/C,Ride Control ....................................................................................$CALL 2014 KAWASAKI 70Z7, Ride Control, QC, A/C, 2 units ........................................................................$176,000 2013 CAT 924K, EROPS, A/C, Heat, GP Bucket ........................................................................................$CALL 2012 KAWASAKI 90Z7, Ride Control, A/C, Heat, 842 Hrs ....................................................................$265,000 2012 VOLVO L50G, EROPS, A/C, 4 units available....................................................................................$CALL 2011 CAT 928HZ, EROPS, A/C, Heat, 387 Hrs ....................................................................................$129,000 2011 CAT 908H, EROPS, 3rd Valve, QC, 1993 Hrs ................................................................................$75,000 2011 KOMATSU WA 200-6, EROPS, A/C, 858 Hrs....................................................................................$CALL 2010 CAT 924H, EROPS, A/C, QC, Heat, 1293 Hrs ..............................................................................$118,000 2009 CAT 930H, EROPS, A/C, Ride Control, 881 Hrs ..........................................................................$139,000 2006 KOMATSU WA250-5, EROPS, A/C, Heat, 4749 Hrs ......................................................................$98,500 2005 CAT 928G, EROPS, A/C, Heat ........................................................................................................$73,000 2004 CAT 928GZ, EROPS, Ride Control, 3838 Hrs ................................................................................$85,000 2001 CAT 950G, EROPS, A/C, Ride Control, Heat ..................................................................................$79,000

LOADER / BACKHOES 2014 DEERE 310SK, EROPS, A/C, 8 units avail ........................................................................................$CALL 2011 JCB 3C-14, EROPS, A/C, Heat, 874 Hrs ........................................................................................$62,500 2008 CASE Super M, EROPS, Aux Hyd., Ex-hoe, 4 units ......................................................................$52,500 2007 NEW HOLLAND B95, EROPS, Pilot Controls, A/C ........................................................................$22,000 2007 NEW HOLLAND B95, EROPS, A/C, Heat, 2807 Hrs..........................................................................$CALL 2001 DEERE 410G, EROPS,4x4, Extendahoe, 7871 Hrs ..........................................................................$CALL 1996 NEW HOLLAND 555D, EROPS, Heat, A/C ........................................................................................$CALL

COMPACTORS 2010 CAT CD54, EROPS, 67” Smooth Drum, 42 Hrs ..........................................................................$105,000 2010 VIBROMAX VM46 PD, OROPS, 55”Pad, 353 Hrs..........................................................................$46,500 2008 CAT CP56, OROPS, 84” Pad Foot, 1502 Hrs ................................................................................$89,000 2008 CAT CP56, OROPS, 84” Pad Foot, 1467 Hrs ................................................................................$87,000 2007 DYNAPAC CA150 PD, OROPS, 66”, 380 Hrs ................................................................................$55,000 2007 DYNAPAC CA250 PD, OROPS, 84”, 2249 Hrs ..............................................................................$57,500 2006 IR SD70 D, OROPS, Smooth Drum ..............................................................................................$39,000 2001 IR SD100F, OROPS, 84” Pad Foot, 2104 Hrs ..................................................................................$CALL 2001 CAT CP323C, OROPS, 48” Pad Foot..............................................................................................$31,000 1998 HYPAC C850 C, OROPS, 84” Smooth Drum ................................................................................$32,000

SKID LOADERS 2014 Kubota SLV90-2, EROPS, Rubber Track, 2 units..............................................................................$CALL 2013 CAT 262D, EROPS, A/C, Aux Hyd., 50 Hrs ......................................................................................$CALL 2012 CAT 252B3, EROPS, A/C, Heat, 9 units avail ................................................................................$37,500 2012 CAT 289C2, EROPS, A/C, Rubber Tracks, 2 units..........................................................................$70.000 2012 CAT 297C, EROPS, QC, High Flow Hyd., 1268 Hrs ..........................................................................$CALL 2007 NH L180, EROPS, A/C, Heat, 1300 Hrs ........................................................................................$25,500 2006 Mustang 2044, OROPS, 361 Hrs ....................................................................................................$CALL 2002 Deere 250, EROPS ..........................................................................................................................$CALL

FORKLIFTS 2013 SKYTRAK 10054, EROPS, FF Tires, 810 Hrs ..............................................................................$118,000 2013 SKYTRAK 8042, EROPS, FF Tires, 794 Hrs ..................................................................................$86,500 2012 SKYTRAK 10054, EROPS, FF Tires, 2034 Hrs ............................................................................$102,500 2007 SKYTRAK 8042, OROPS, FF Tires, 2588 Hrs ................................................................................$55,000 2006 GEHL RS5-34, OROPS, 2357 Hrs..................................................................................................$35,000 2006 GEHL DL10H-55, OROPS, 1574 Hrs ............................................................................................$42,000 2006 SKYTRAK 8042, OROPS, FF Tires, 2373 Hrs ................................................................................$55,000 2005 SKYTRAK 6042, OROPS, 4x4, 2773 Hrs ......................................................................................$42,000

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 33

Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15

Made in the USA

1.866.643.1010

The SEAL SAVER WILL:

ClearSpan.com/ADCEGMW

Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries.

Made in the USA.

Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

Visit

CLLEAR EARSPPAN AN IS IS YYOUR OUR PREFERRED PREFERRED

SSOLUTION OLUTION FFOR OR AALL LL YOUR YOUR CCONSTRUCTION ONSTRUCTION NEEDS NEEDS

Protect materials and equipment. Perfect Perfect for workshops or jobsite storage. Operate and store large vehicles and equipment. Low cost per square foot. Lower energy costs with natural lighting.

www.sealsaver.com

for more information or contact us at 1-800-683-5189

7-YEAR FINANCING ZERO DOWN, NO INTEREST & PPAYMENTS AYMENTS - FOR UP TO ONE FULL YEAR -

2011 Case 580SN, 978 Hrs, Cab w/Heat A/C, 4x4, Extendahoe, 2 Lever, Aux Hyd, LH Door w/Heater/AC, 82 Wide Long Lip (1 Cu. Yd.), Radio, Ride Control/Glide Ride, Power Lift, Tool Box, 4WD Standard Trans. Deluxe Air Suspension Seat-Cloth, Aux. Hyd & Manual Controls, Grid Heater w/Dual Batteries, Dual Lever Controls, Extendahoe..$79,500

2010 Case 445, 560 Hrs, ROPS, Manual Coupler, Vinyl Seat 78” Long Lip Smooth Bkt Block Heater 12 x 16.5 ....................................................$29,500

1998 Takeuchi TB070, 7800 Hrs, Cab with Heat, Bucket, 70% Tracks, Runs Great! ..............$26,500

2012 Case 580SN, 881 Hrs, Cab w/Heat & AC, 4x4 Extendahoe Ride Control, 82” Bucket, 18” Bucket Case Controls ............................................$85,000

2006 Case 550H LT, 1155 Hrs, ROPS Machine w/Sweeps & Rear Screen, 85 Percent CELT Tracks ..................................................................$45,500

2007 Case 650K III, 1960 Hrs, Series III ROPS, Narrow Gage Standard Dozer, Three Shank Ripper, 98” Blade, 16” Grousers, Environmental Drains...... ..................................................................$59,500

2005 Komatsu PC120-6, 4500 Hrs, Manual Thumb ..........................................................................$39,000

2007 Bobcat 335, 4500 Hrs, Open ROPS, Aux Hydraulics, Keyless Start ..........................$23,500

Page 34 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Crews Encounter High Voltage Line From Nuclear Plant HIGHWAY from page 1

It is projected by the Corridor Metropolitan Planning Organization that the area from the Cedar River to Interstate 380, which includes the Edgewood Road area, could see 5,419 new jobs and 9,392 new residents by 2040. Highway 100 will eventually connect the west side of Cedar Rapids to other businesses and communities north and east of the city. The connection at Edgewood Road will link to a segment of Highway 100 built between Interstate 380 and Edgewood Road Northeast in 1983. The first part of Phase 1 includes preparation of the roadbed from Old Ferry Road to Ushers Ferry Road and the bridges for Old Ferry Road, Ushers Ferry Road and the Cedar River. Portions of the first 4 mi. stretch follow an old railroad grade and then veer off. Old railroad structures have had to be removed and wetlands were encountered, said Vu. “We built a new pond and a box culvert with two lanes, one as a dry crossing and one is a wet crossing, to accommodate endangered turtles living in the area, making it possible for the turtles to cross under the road.” The two year, Phase I portion is well underway by prime contractors Peterson Contractors Inc. (PCI), of Reinbeck, Iowa, and C.J. Moyna & Sons Inc. of Elkader, Iowa. Subcontractor Kramer Construction Services Inc., of Des Moines, Iowa, is working on the Edgewood Road project, and a portion of the bridge over the Cedar River. Kramer Construction

Pier 2 on river bridge completed.

also is teaming with United Contractors Inc. of Des Moines on the other two bridges. Grading on the west side is complete, Vu said. Grading on the east side was saved for work during the winter because the soil has already been cut and removed so crews don’t have to worry about compaction of the soil. On the Edgewood road project, 24,000 yds. (21,945.6 m) of embankment is required, 210,000 yds. (192,024 m) of excavation will be done and there is another 137,000 yds. (125,272.8 m) of excavation waste. However, some complications occurred at Ushers Ferry Road when crews encountered some forgotten railroad tracks and also ended up drilling through a box culvert that was forgotten about, Vu said. Crews also had to drill through an old abutment that was buried and relocate a sanitary sewer line because of the location of a pier. Other utilities also in the process of being relocated. Construction on the three bridges is progressing at the same time. The largest bridge is over the Cedar River and will consist of 9 spans with steel girders, and 8 piers. The $46.7 million bridge will be 1,865 ft. (568.45 m) long and four lanes wide. The new bridge over the Cedar River will be higher and be beneficial to the community should a flood close other, shorter bridges in the area. Currently, two of the piers are completely finished and three are in various stages of completion, while two haven’t been started, Vu said. Work will continue through the winter months, temperatures

Pier 2 on river bridge forming pier cap.

allowing. “If we have lows in the low teens we can get in and out because the ground is frozen. Our average temperature is 10 degrees but if it gets below that we will stop work,” Vu said. The two smaller bridges, one at Usher’s Ferry Road is two spans, while the one on Old Ferry Road is three spans. The bridge at Edgewood Road is one span. Challenges continued while working on the bridge over the Cedar River. Crews encountered a high voltage transition line from the Duane Arnold Nuclear Plant. The transition line contains 134kv of voltage, Vu said. “It was not possible to de-energize the line because it goes directly into the

power plant. We are about five miles from that plant.” “We had to work around that line using a short crane to build the pier that was under the power line. We have the bottom half of the pier done and still have the cap to do” Vu said. “Instead of putting the entire pile in we had to cut it in half and install two short ones. … We also had to put up a safety line that was 10 feet below the bottom wire warning us if we were getting too close. Crews put poles up in the air to string a safety cable with flags on it to warn us when we were getting close. Then, on the west side of the river where the west abutment for the big bridge is, the soil conditions

River bridge looking west from east abutment.

were questionable. “About 260,000 cubic yards of contractor furnished embankment was required to shore up the west side. The area by the Cedar River required 308,000 yards of excavation,” Vu says. The design included some rigid inclusions on the west bank. The ridged inclusions went to right-ofway lines. “The contractor had to secure access to private property to get to the berm on that side. We could get to the top side but not the bottom,” Vu said. “We had a 40 foot bank to get down.” Vu continued, “We built concrete columns into the ground all the way to bedrock and the see HIGHWAY page 46

River Bridge west abut load transfer over rigid inclusions.

SECTION

Attachment & Parts Pages 35-39

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

McLaren Introduces New Industrial, Off-the-Road Tires

McLaren’s Nu-Air semipneumatic tire series integrates the strength and stability of a solid tire with the smooth, cushioned ride of a pneumatic tire.

Featuring more than 10 years of field testing and continuous improvements of the tire structure, McLaren’s Nu-Air semi-pneumatic tire series integrates the strength and stability of a solid tire with the smooth, cushioned ride of a pneumatic tire. With its lower cost per hour, the Nu-Air tire has become known as a smart alternative to foam filled tires and regular pneumatic tires, according to the manufacturer. Until now, only OEMs had access to a limited offthe-road (OTR) range of tire sizes. McLaren now introduces the full range both to the OEM and to the retail market. Thus, industry manufacturers and users of backhoes, telehandlers, front-end loaders, wheel loaders and wheeled excavators finally have access to the proven cost effective technology that was once available to compact equipment only. “Originally skid steer loaders and some backhoes were eligible for solid cushion tires,” said George Zafirov, marketing manager of McLaren Industries. “For years OEMs and equipment users have been reporting higher equipment productivity and reduced maintenance costs derived from the usage

of such tires. The continuous positive results and the numerous inquiries about other tire sizes motivated McLaren’s R&D department to invest in new tire sizes, and apply the semi-pneumatic tire technology for heavy construction equipment as well.” The OTR solid cushion tires are not only a smart alternative to foam filled or solid tires, but also to the heavy and expensive tire chains preferred by many mining companies. The flat proof technology eliminates the need for tire prevention, while the extra weight of the tires provides the stability that is crucial on any harsh terrain. There are a variety of patterns available, allowing customers to select the right tire for their type of terrain. Particularly unique is the RT pattern for size 20.5x25. It has been developed precisely for problematic surfaces, where rocks, scrap and debris give trouble to even the most experienced operators. For more information, call 800/836-0040 or visit www.mclarenindustries.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Loftness Introduces Carbide Cutter G3 Head Attachment Loftness’s carbide cutter G3 high-performance mulching head attachment for skid steers incorporates the latest cuttingtooth technologies and power drive systems, while maintaining the rugged reliability expected of Loftness equipment. The carbide cutter G3 is available with 51-, 61- and 71-in. (129.5, 155 and 180 cm) cutting widths. All models are offered with a variety of carbide-tipped and heat-treated steel teeth to match any job application. The precisely engineered spiral tooth pattern on the rotor ensures continuous tooth contact with the material being cut. For maximum cutting performance, the carbide cutter G3 features a two-stage cutting chamber with staggered counter teeth and a shear bar. This combination of features results in small particle sizes, while eliminating the jamming and wrapping issues associated with competitive products. An optional primary-stage shear bar also is available for ultra-fine mulching.

The mulching heads operate at 1,700 to 2,150 rpm and feature a four-groove banded belt drive with spring-loaded tensioner. They come standard with a fixed-displacement, piston-style motor that delivers hydraulic power at 97-percent efficiency, which is much higher than traditional geartype motors offer. The fixed-displacement motor can be upgraded to the V-Drive system that includes a variable-displacement motor with load-sensing technology. Under light loads, the V-Drive system operates at maximum rpm, and as the load increases, it automatically lowers the rotor rpm to maximize torque. The mulching head offers full rotation, due to specially designed hose routing. This feature also allows the unit to easily position trees with the adjustable push bar and welded claw hooks. The push bar can be used to push falling brush and trees away from the power unit, and the claw hooks can pull material into position for proper feeding.

The carbide cutter G3 is available with 51-, 61- and 71-in. (129.5, 155 and 180 cm) cutting widths. All models are offered with a variety of carbide-tipped and heat-treated steel teeth to match any job application.

Hydraulic push bar adjustment is optional. The carbide cutter G3 also is designed for maximum durability. For instance, high-

strength Hardox steel is used in areas exposed to high wear. Furthermore, the carbide cutter G3 is equipped with a custom hydraulic control valve that protects the unit from pressure spikes, and it also stops the rotor quickly on shut-down without damaging the components. Other standard features include an onboard pressure gauge, steel deflector chains and adjustable skid shoes. Tooth options include standard carbide teeth, planer carbide teeth and quadco planer blades. Loftness manufactures the VMLogix line of vegetation management equipment, the SnowLogix line of snow blower attachments, the GrainLogix line of grain-bagging equipment and the CropLogix line of crop shredders. For more information, call 800/828-7624 or visit www.vm-logix.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 36 • February 28, 2015 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Atlas Copco Launches New Hydraulic Breaker Attachments in EC Range

The H-020 requires a skid steer or other hydraulic power supply to deliver 10 gpm (37.8 Lpm) at 1,500 psi to operate at maximum speed. Since the system uses hydraulics to rotate the rotor section, the H-020 requires just 225 cfm of compressed air.

Blastcrete’s H-020 Provides Power, Attaches Easily Blastcrete Equipment Company’s H-020 gunite attachment gives shotcrete contractors a powerful rotary gunite machine that attaches easily to any skid steer, requires less compressed air and saves space on job sites. The easy-tooperate machine delivers precise material control for projects such as concrete repair, soil stabilization and refractory lining applications. The hydraulically-powered H-020 is equipped with Blastcrete’s “Genuine Piccola” single-point, self-leveling clamping system that ensures simple operation and minimal maintenance. The unit is equipped with a universal mounting plate for attachment to skid steers. It also features pockets so users can transport it with a forklift. While other dry-process, shotcrete gunning systems typically require three to four adjustment bolts to seal the rotor section, the H-020 requires just one. The simplified design makes it quick and easy to adjust and clean, and ensures safe, trouble-free operation. The H-020 requires a skid steer or other hydraulic power supply to deliver 10 gpm (37.8 Lpm) at 1,500 psi to operate at maximum speed. Since the system uses hydraulics to rotate the rotor section, the H-020 requires just 225 cfm of compressed air, which is 50 percent less than comparable, fully pneumatic gunite machines. It operates with variable speeds from 0 to 5 cu. yds. (0 to 3.8 cu m) per hour and can be used with delivery systems that exceed 500 ft. (152 m). The H-020 is 34 in. (86 cm) wide, 34 in. long and 50 in. (127 cm) tall. The unit’s size makes it easy to move, and it takes up less space on the job site. The machine also can be loaded into the back of a pickup truck for easy transport. Blastcrete customizes each machine to meet customer requirements and offers free maintenance and operation training at its facility in Anniston, Ala. For more information, call 800/235-4867 or visit www.blastcrete.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Atlas Copco has added three new hydraulic breaker attachments to its Essential Case-Mounted (EC) range to fit 22- to 49-ton (20 to 44 t) carriers. The new heavy range breaker attachments — the EC 140 T, EC 150 T and EC 155 T — like the full line of EC breakers, give rental centers and contractors fast ROI by simplifying maintenance and operation. “The heavy range EC breakers generate powerful breaking power inside a streamlined body,” said Kevin Loomis, construction tool business line manager. “Their simplicity also makes them a perfect addition to rental and equipment fleets because they’re easy to maintain and handle.” The EC breaker attachments feature Atlas Copco’s box-style mounting systems, which eliminate the need for removing external fasteners to access components, such as wear bushings and seals. This translates to expedited turnaround times for maintenance and, as a result, higher utilization rates. The heavy-duty attachments are as light as 4,000 lbs. (1,814 kg) and generate impact rates as high as 800 bpm to deliver effective impact energy to the breaking surface. With their high power-to-weight ratios, they’re effective in demanding applications such as demolition, earthwork, quarrying and trenching, according to the manufactur-

Atlas Copco’s largest essential line breaker, the EC 155, 22- to 49-ton (20 to 44 t) carriers are simple to operate and maintain.

er. Atlas Copco measures the power of its breakers using the Association of Equipment Manufacturers’ foot-pound

Leading Edge’s V-Raptor Bucket Rips Rock, Frozen Ground Apart The V-Raptor bucket from Leading Edge Attachments Inc. is a ripper/bucket combination for excavators and backhoes that allows the operator to easily rip rock, coral or frozen ground with the maximum breakout force, pry out and carry stumps or cradle boulders, rip a clean narrow V-trench for laying utilities, plus scoop and load material, allowing the operator to own a ripper plus be able to scoop and remove ripped debris without requiring the tool or machine change to use another bucket. It is manufactured in the United States using high strength Hardox 400 steel slabs for abusive or cold weather conditions. For more information, call 866/928-5800 or visit www.digrock.com.

rating. The rating, which was developed by the Mounted Breaker Manufacturers Bureau, makes it easy for rental centers and contractors to compare breaker models by reviewing true figures collected after a certified test procedure. The heavy range EC breakers also ensure smooth operation and long service lives with integrated features such as nitrogen-gas assist and Atlas Copco’s energy recovery system. The nitrogen piston accumulator works with the hydraulic oil to accelerate the piston, which decreases the hydraulic oil demand from the carrier’s hydraulic systems and delivers consistently highimpact energy. The energy recovery system minimizes hydraulic pressure spikes and captures reflected energy within the hydraulic accumulator to increase the impact performance of the next blow. Finally, the breakers feature Atlas Copco’s VibroSilenced Plus systems. They isolate percussion mechanisms from breaker boxes with polyurethane damping and seal all attachment openings to minimize noise and vibrations. For more information, visit www.atlascopco.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • February 28, 2015 • Page 37

1985! e c n i S

CUSTOM HYDRAULIC KITS TO OPERATE ATTACHMENTS FOR EXCAVATORS & TRACTOR-LOADER-BACKHOES

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

ENGINEERED TO PERFORM DURABLE BY DESIGN ypicall .200” wall thickness

s Kits to operate most any attachment s Welded tube ends for maximum strength & durability s OEM style ORFS or CD62 4-bolt flange s Higher safety standards s Efficient designs with fewer connections

www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com

s Add on/custom valves

^^^ OJ[RP[Z JVT -S\PK +YP]L 4J+VUV\NO .( ZHSLZ'OJ[RP[Z JVT - S \ P K + Y P ] L 4 J + V U V \ N O . ( Z H S L Z ' O J [ R P [ Z J V T

Page 38 • February 28, 2015 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Multi-ply Your Money! with the excavator rock ripping Multi-Ripper Bucket ®

Multi-Ripper Bucket Hi-Cap Multi-Ripper Bucket

Multi-Ripper

Multi-Ripper Bucket

n on As seye channel’s er Disco#v1 hit shosw Ru h” d l o G “ 6 to 9 times the force of a standard 5 tooth bucket 4 times faster than a hammer

Maximize force one tooth at a time, using our patented "Shanks on an Arc" technology.

eading "Leader in Excavator Rock Ripping Attachments" dge visit: www.digrock.com ttachments, e-mail: sales@leattach.com Inc. ®

call to order: 866-928-5800 or 508-829-4855

HydrauliCircuit Technology Inc. Adds Greg Hickman HydrauliCircuit Technology Inc., based in McDonough, Ga., has announced the recent addition of Greg Hickman as regional sales manager, with responsibilities in the central and western region of North America. Hickman’s extensive background in business development, account management, application sales, and product marketing spans more than 30 years. His 18 years of sales experience in the construction industry in working directly with heavy machinery dealers, excavator and attachment manufacturers throughout North America will allow HydrauliCircuit Technology to increase its strategic relations and support the dealers and OEMs in the region. Hickman said that he “is excited about the opportunity and is looking forward to engaging and supporting dealers in the region for any auxiliary hydraulic kit needs on their current and out of production line of excavators and backhoes.”

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • February 28, 2015 • Page 39

Page 40 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Portable Power WE DO MORE THAN DESIGN EQUIPMENT.

WE POWER YOUR SUCCESS. Whether you are looking for products with the latest technology or you want to have your old machine remanufactured, Doosan Portable Power can help you acheive success. Focused on customer satisfaction and product solutions, our dealer network is the largest nationwide network in the industry. Contact your

local dealer today. Aspen Equipment Co.

McAllister Equipment Co.

9150 Pillsbury Ave. S Bloomington, MN 55420 (952) 888-2525

150 E. North Ave. Villa Park, IL 60181 (630) 530-7600 Alsip/Chicago, IL (708) 389-7700 E. Peoria, IL (309) 694-4455 Rockford, IL (815) 227-0555 Springfield, IL (217) 789-0351

Find Us on

Roland Machinery Co. 4670 Crossroads Industrial Drive Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252 Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Carterville, IL (618) 985-3399 DePere, WI (920) 532-0165 DeForest, WI (608) 842-4151 Eau Claire, WI (715) 874-5400 Franksville, WI (262) 835-2710 Schofield, WI (715) 355-9898 Escanaba, MI (906) 786-6920

800.633.5206

Central Power Systems & Services 9200 Liberty Drive Liberty, MO 60468 (816) 781-8070 Springfield, MO (417) 865-0505 Wichita, KS (316) 943-1231 Great Bend, KS (620) 792-1361 Liberal, KS (620) 624-7274 Salina, KS (785) 825-8291 Colby, KS (785) 462-8211

DoosanPortablePower.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 41

Howell Tractor 480 Blaine Street Gary, IN 46406 800/852-8816 Fax: 219/977-4220

Illinois Truck & Equipment www.iltruck.com 320 Briscoe Drive Morris, IL 60450 815/941-1900 Fax: 815/941-1486

Kelbe Brothers Equipment Co., Inc. www.kelbebros.com 12770 W. Silver Spring Drive Butler, WI 53007 262/373-2151 Fax: 262/373-2102 4621 Dutch Mill Rd Madison, WI 53716 608/221-8300 Fax: 608/221-0610 3101 French Rd. De Pere, WI 54115 920/343-6496 Fax: 920/343-6449

Grand Equipment Company Mid Country Machinery 3478 5th Ave South (Bus. Hwy 20) Fort Dodge, IA 50501 800/206-5936 4734 Sergeant Rd. (Hwy 63) Waterloo, IA 50701 319/234-8710 106 8th Street Sergeant Bluff, IA 51054 712/943-4470

Custom Truck & Equipment www.customtruckandequipment.com 7701 E. 24 Highway Kansas City, MO 64125 800/861-1065 816/241-4888 Fax: 816/241-8826

General Equipment & Supplies, Inc. www.genequip.com 4600 Valley Industry Blvd. S. Shakopee, MN 55379 800/966-1455 Fax: 952/224-1570 3902 N. Jessica Ave. Sioux Falls, SD 57104 605/336-9000 Fax: 605/336-0073

www.grandequipment.com 3310 Hudson Trail Dr. Hudsonville, MI 49426 616/896-7700 Fax: 616/896-6700

Construction Machinery Company www.cmcky.com 2911 S. English Station Rd. Louisville, KY 40299 502/267-4020 866/901-2262 Fax: 502/261-9251 2235 Ragu Drive Owensboro, KY 42303 270/683-2000 877/683-2262 Fax: 270/683-3727 267 W. Jay Louden Rd. Carrollton, KY 41008 502/732-4661 Fax: 502/732-8355

Page 42 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Indexator Name Change Signifies Long-Term Decision ALL Crane of Alabama received the first shipment. (LR) are ALL Crane Rental of Alabama’s, Scott Swearengin (dispatcher), Phillip Calametti (sales), Brian Ledford (GM), Rich Randall (Cleveland operations manager) and David Mizelle (service manager).

ALL Purchases 17 Tadano Hydraulic Cranes for Fleet The ALL Family of Companies has closed the deal on two Tadano ATF 400G-6 (450 ton [408 t]) hydraulic all terrain cranes, just one month after adding 15 Tadano GR-550XL (55 ton [50 t]) hydraulic rough terrain cranes to its national fleet. The investment in 17 new Tadano machines within 60 days is part of ALL’s commitment to maintaining the industry’s broadest and most modern fleet. With a 450-ton lifting capacity, the ATF 400G-6 is the manufacturer’s largest-capacity all terrain crane and has a max lift height of 402 ft. (122 m). Its 198.6-ft. (60 m) boom is the strongest in its class, able to lift loads for which other similarly classed cranes would require the use of a suspension system, according to the manufacturer. The 55-ton capacity GR-550XL RT features a full-power, four-section synchronized telescoping boom (35.1 to 113.9 ft. [10.7 to 34.7 m]). These versatile and maneuverable midrange RTs, which are especially good for daily rentals and city work, are expected to be popular all over ALL’s 37branch network. “Tadano makes extremely reliable equipment that our customers trust,” said Michael Liptak, president of the ALL Family of Companies. “These new mid- and large-capacity cranes will be very busy immediately upon their arrival.” Liptak added that falling fuel prices are affecting the crane business in more ways than the reduction in travel expenses. “We are expecting to see lots of infrastructure projects like bridges, road work and commercial construction that the 450-ton Tadano AT can easily get after. Lots of long-plannedfor, though stalled, projects are finding their funding.” Ron Dogotch, VP of sales of Tadano said, “It is a privilege to work with ALL as we continue to expand our relationship and provide Tadano’s quality line of rough terrain and all terrain crane products for their rental fleet requirements.” The 17 Tadano cranes will be delivered to the ALL Family of Companies throughout 2015. The two ATFs will be based at ALL’s Chicago and Canadian branches. For more information, call 800/232-4100 or visit www.allcrane.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

On March 1, 2015, Indexator Rototilt Systems will change its name to become Rototilt. Behind this apparently undramatic change lies a larger, long-term decision about continued product development and a determined marketing initiative in North America and Europe. “We see an enormous potential in places like North America, England, France and Germany where tiltrotators are still not used to the same extent as here at home, but where developments are beginning to pick up speed,” CEO Anders Jonsson said. The key to success for Rototilt lies in a well established foundation in the Nordic countries (90 percent of all sold excavators under 33 tons are equipped with a tiltrotator) together with established sales channels and an increased interest from end users and suppliers on the new markets. Rototilt’s investment in modular production — which allows the customer to determine how the tiltrotator should be configured — also will be a significant success factor here, according to the company. “The international market is not homogeneous. Needs differ greatly from country to country and from contractor to contractor. Thus in the future, all the major manufacturers will offer customized tiltrotator solutions, but Rototilt already provides this freedom of choice today.” The investment also is good news for the town Vindeln in northern Sweden. In order to manage the company’s continued expansion and growing market share, it is now making a number of strategic recruitments within IS, IT, finance and HR. The head office and all product development will continue to be located in Vindeln, Västerbotten, in northern Sweden. “It’s no secret that we’ve been approached by international companies who want to make Rototilt a part of their product portfolios, and even though these overtures are flattering, I see no reason to change our winning team. “Rototilt is the world’s leading tiltrotator today as a result of its personnel’s hard work and single-minded efforts. I’m proud of what we’ve achieved together and convinced that we have the right team line-up and the right head office address even as we take the next step in our development.” The name change also is a natural development of the ownership changes in Indexator companies effective as of Oct. 1, 2014. CEO Anders Jonsson has now focused his ownership and commitment on Rototilt while sister company Indexator Rotator Systems is now owned by Hans and Pia Jonsson together with Åke Karlsson. For more information, call 519/754-2171. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Visit CEG’s Web Site at www.construction equipmentguide.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 43

Page 44 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

STAR EQUIPMENT LT D .

HARDINGS HEAVY EQUIPMENT 109 w. commERcIAl AvENUE lowEll, IN 46356 (219) 696-8911 FAx: (219) 696-8915 www.HARdINgSINc.com

STAR EQUIPMENT LTD. 1401 2Nd AvENUE dES moINES, IA 50314 (515) 283-2215 FAx: (515) 283-0295 (800) 369-2215

2950 6TH STREET Sw cEdAR RAPIdS, IA 52404 (319) 365-5139 FAx: (319) 365-6726 (800) 728-5139

2625 w. AIRlINE Hwy. wATERloo, IA 50703 (319) 236-6830 FAx: (319) 236-6834 (800) 791-9249

2100 E. lINcolN wAy AmES, IA 50010 (515) 233-9500 FAx: (515) 233-9505 (866) 856-2312

www.STAREQUIP.com

TOP NOTCH EQUIPMENT, INC. 5505 HIgHwAy 169 N. PlymoUTH, mN 55442 (888) 824-6559 (763) 398-0079 FAx: (763) 551-7916 www.ToPNoTcHEQUIPmENT.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 45

7355 East 30th St. Indianapolis, IN 46219 (317) 544-3411 Fax: (317) 544-3420 www.westsidetractorsales.com Bloomington, IN (812) 333-9677 Fax: (812) 333-9731

South Bend, IN (574) 232-1461 Fax: (574) 233-3324

4301 North Cliff Ave. Sioux Falls, SD 57104 (888) 753-8907 3801 North Deadwood Ave. Rapid City, SD 57702 (800) 658-3047 39288 133rd St. Aberdeen, SD 57401 (888) 484-6312 www.dieselmachinery.com

Fort Wayne, IN (260) 482-8576 Fax: (260) 483-4057 LaFayette, IN (765) 447-6933 Fax: (765) 448-9038

4100 Gardner Ave. Kansas City, MO 64120 (800) 878-9290 (816) 241-9290 www.vlpco.com Joplin (800) 878-8223 (417) 781-8222 Springfield (800) 955-2729 (417) 887-2729 Wichita (800) 878-3346 (316) 838-3346 Topeka (800) 878-4345 (785) 267-4345 Garden City (800) 511-1435 (620) 275-1996

2300 Cassens Drive Fenton, MO 63026 (636) 343-9970 www.lubyequipment.com

50 East Kingston Ave. Columbus, OH 43207 614-443-6541 www.columbusequipment.com

Cape Girardeau (573) 334-9937

Perrysburg (419) 872-7101

Springfield (217) 744-2233

Cincinnati (513) 771-3922

Quincy (217) 222-5454

Richfield (330) 659-6681

Caseyville (618) 397-9971

Cadiz (740) 942-8871 Dayton (937) 879-3154 Canton (330) 453-4521 Zanesville (740) 455-4036 Painesville (440) 352-0452 Piketon (740) 289-3757

Page 46 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Design Includes Rigid Inclusions on West Bank to Right-of-Way Lanes CONTINENTAL EQUIPMENT CORP. A division of AIS www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000 517/321-4191 Fax

BRANDEIS MACHINERY & SUPPLY COMPANY Cedar River flooding pier 1. Rebar from footing above water line. HIGHWAY from page 34

machine would push an 18-inch diameter ram all the way to the bedrock. As crews extracted the tool they filled it with concrete. Concrete columns were placed along a gridline that is 5 feet on center. This took many months to set.” Additional concrete columns also were constructed for the road to sit on. Once the inclusions were in place, geofabric was on top of them to the top of our embankment, Vu added. “That went much slower than we anticipated.” Hayward Baker of Hanover, Md., was the contractor for those activities. “We installed instrumentation so we can monitor settlement and so we can move in course of next 6 months.” Using rigid inclusions is not a new technique in the construction industry but it is new to Iowa, Vu said. “This is the second location we have used the rigid inclusions. The first was on the Interstate 80 project in Council Bluffs, which is also currently under construction. But even with this delay and a delay during the summer from flooding of the Cedar River, grading is still expected to be finished by the fall of 2015 and the paving is expected to be finished by 2016, according to Vu. “If the bridge over the Cedar River doesn’t get done we can finish the paving in 2016 when the paving contract is under way.” Another little hiccup in the project occurred on Covington Road. Work on this $5.6 million Covington Road proj-

ect meant Covington Road would have to be closed for about a year to construct a bridge at the Covington and U.S. Highway 100 intersection. “This was to start but it hasn’t,” Vu said. “The contractor wanted to use Covington to transfer materials and didn’t want to close the road, and city of Palo wanted the road for access by its emergency responders. And we saw the benefit of leaving the road over the winter so we will look at starting this project in the spring and then complete it in one season instead of two. This was agreeable to all,” Vu said. The Covington Road project is expected to require 234,000 yds. (213,969.6 m) of embankment and 67,000 yds. (61,264.8 m) of excavation. To help move things along, air track drilling was done ahead of the construction of the substructure units on the Ferry Road bridges. “The substructure on the Ferry Road bridges required drill shafts but ahead of that we had to drill pilot holes to see if rock was solid or had voids,” Vu said. On the Covington Road project, “instead of excavating for the bridge and doing the air tracks and then doing a review, we went ahead and drilled through the road and the berm so we didn’t have to wait for materials to be ordered,” Vu said. Ordering the materials earlier and having them on site helps speed up the process to help

ensure contractors will be able to get the project done in one season. Phase I also includes the construction of an $18 million single point urban interchange at Edgewood Road, which is only the second of its kind in the state. A similar interchange is located on Interstate 35 at Mills Civic Parkway in West Des Moines. A single point urban interchange (SPUI) is similar to a diamond interchange, which has two intersections, one on each side of bridge, but a SPUI allows opposing left turns to proceed simultaneously by compressing the two intersections of a diamond into one single intersection in the center of the bridge, Vu said. “With a diamond interchange, traffic stops at one light and crosses the bridge and goes on to the next light. With a single point there is only one light and it has multiple phases of signal so each ramp can move or the main line can move.” Having one traffic signal makes it possible for vehicles to clear the intersection quicker than in a diamond interchange. SPUIs also allow for wider turns, making it easier for large vehicles to maneuver the turn. And SPUIs takes up less space than a full cloverleaf interchange, meaning construction can take place on less property. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 502/499-3195 Fax Evansville, IN 812/425-4491 812/425-1171 Fax Corbin, KY 606/528-3700 606/528-9014 Fax Lexington, KY 859/259-3456 859/254-0783 Fax Stanville, KY 606/478-9201 606/478-9208 Fax Paducah, KY 270/444-8390 270/575-4907 Fax Indianapolis, IN 317/872-8410 317/872-8417 Fax Ft.Wayne, IN 260/489-4551 260/489-1620 Fax

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 913/371-3870 Fax Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 47

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 906/786-5813 Fax Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 920/532-0526 Fax DeForest, WI 608/842-4151 608/842-4193 Fax Eau Claire, WI 715/874-5400 715/874-5401 Fax Franksville, WI 262/835-2710 262/835-2844 Fax Schofield, WI 715/355-9898 715/241-0044 Fax

GENERAL EQUIPMENT & SUPPLIES www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 701/364-2190 Fax 905 20th Avenue SE Minot ND, 58701 800/852-0479 3500 Apple Creek Road Bismarck, ND 58504 800/279-4437 4082 2nd Ave. W Williston, ND 58801 701/572-0570

ARTICULATED TRUCKS From Komatsu – The Truck Experts

The redesigned Tier 4 Interim Articulated Trucks will boost your productivity and lower your costs. From increased payload to improved traction control, the truck experts at Komatsu once again deliver on your need for a lower cost per ton moved. t Komatsu Traction Control System (K-TCS) automatically increases performance in soft ground conditions. t New operator’s cab provides better visibility and ergonomics. t Efficient Tier 4 Interim engine provides up to an 8% reduction in fuel consumption. t Komatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.

www www.komatsuamerica.com .komatsuamerica.com

Page 48 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BE PREPARED: WHEN YOU PUT THIS KUBOTA TO WORK, EVERYONE WILL WANT A TURN. The New Kubota L39 Tractor/Loader/Backhoe Auto-leveling valve keeps bucket or pallet forks level Glide Shift Transmission 39 HP Kubota diesel engine IntelliPanel™ digital information center Side position display for better visibility and faster, safer operation Slanted hood for better visibility Side mounted loader control with arm rest Quick-attach backhoe exposes independent PTO

Burris Equipment Co. 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 Fax 847/336-2697 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 Fax 815/363-4109

2001 Cherry Hill Rd. Joliet, IL 60433 815/464-6650 Fax 815/464-6951

1st Choice Equipment LLC 124 N. Schmale Rd. Carol Stream, IL 60188 630/510-6050 Fax 630/510-6051 1305 Sentry Drive Waukesha, WI 53186 262/521-5802 Fax 262/521-5801

Birkey’s Construction Equipment 2202 S. High Cross Road Urbana, IL 61802 800/798-1772 Fax: 217/337-1775

2900 E. Jackson St. Macomb, IL 61455 888/360-9225 200 North St. Prophetstown, IL 61277 877/221-0881

Lano Equipment, Inc. Anoka, MN 888/448-5266 753/323-1720 Shakopee, MN 877/753-6100 952/445-6310

Corcoran, MN 888/479-4342 763/479-8200

www.kubota.com

ABC Equipment 29 Pearl Rd. Brunswick, OH 44212 888/572-3888 Fax: 330/220-4949 3825 Chester Rd. Avon, OH 44011 440/934-7368 www.abcequipment.com

Southeastern Equipment Co., Inc. 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260/483-8868 4951 West 96th Street Indianapolis, IN 46268 317/872-4877 www.southeasternequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 49

WHATEVER YOUR APPLICATION, THERE’S A PERFECT TEREX CRANE. With over 100 years of experience and a commitment to speed, Terex Cranes focuses on getting the job done, aiming at maximum uptime and a high return on investment. Because your results are what really matters.

RTL Equipment Inc. (RT-T-HC/CC-AT) www.rtlequipment.com 3000 SE Gateway Drive Grimes, IA 50111 515-986-0262 Fax: 515-986-0267 2601 120th St. NW Swisher, IA 52338 319-857-4045 Fax: 928-441-1269

Custom Truck & Equipment (RT-T-HC/CC-AT-BT) 7701 Highway 24 Kansas City, MO 64125 800-861-1065 www.cte-equipment.com

Contact our distributors and find out how we can help to improve your bottom line.

Terex is a registered trademark of Terex Corporation in the United States of America and many other Countries.

For Your Local Terex Dealer, Please Contact: Terex USA, LLC 106 12th St. SE Waverly, IA 50677 USA Phone: (319) 352-3920 Fax: (319) 352-9395 email: info.cranes@terex.com web: www.terex.com/cranes

Page 50 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Owner of Ohio CAT Receives Award During Reception

Larry Matus of Gensco Equipment discussed the company’s range of material handling attachments and Dynaset hydraulic equipment.

(L-R): At the Screen Machine Industries display, Mike Thurman; Jeff Williams, president; Steven Cohen; and Director of Sales Lewis Long welcome attendees. AED from page 26

Bidspotter.com Sales Manager Tim Hill stands ready to answer questions about online auctions. Rene Wagner of RubbleMaster is looking for a few good dealers for his state-ofthe-art material processing plants.

Okada America’s Michael Meehan (L) and Tony Neikirk spoke with attendees about their hydraulic breakers, shears, crushers, pulverizers and processors.

Hugh Gordon (L) and Eric Thornton of C.W. Machine Worx received a lot of attention with the company’s HAWC (High Air-Pressure Water Canon), on display at the show.

Rototilt manufactures one of the most rugged, versatile rotating bucket systems available. The system has gained wide acceptance in the United States and Canada. Rick Gordon (L) and Gerry Mallory.

Denis Bataille (L) and Gary Hesseltine of Tramac Corporation are eager to tout their company’s line of hammers to attendees.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 51

Meeting emissions regulations demands forward thinking. And John Deere has always been ahead of the game. So when you asked for simple, proven Interim Tier 4-certified technology that won’t hold you back, we answered. First with the 744K,* and now with the IT4-certified 644K and 724K Loaders. Our emissions technology is simple to operate and maintain. And it delivers the power, fuel efficiency, reliability, and low cost of ownership you’ve come to expect from John Deere. Need a partner for emissions solutions? We’re On It™. * First machine over 75 hp in the industry to be certified to meet U.S. Interim Tier 4 emissions.

THINK. AHEAD.

Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989/777-0090 Fax: 989/777-1583

Traverse City 8300 M-72 East Williamsburg, MI 49690

Northeast Detroit 65809 Gratiot Ave Lenox, MI 48050 586/727-7502 Fax: 586/727-7311

West Detroit

56555 Pontiac Trail New Hudson, MI 48165 248/437-8121 1-800/457-8121

Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616/538-2400 Fax: 616/538-0449

231/267-5060 Fax: 231/267-5257

www.westsidetractorsales.com Naperville, IL 60563 Bloomington, IN 47403 D

, 630/355-7150 Fax: 630/355-7173

Rockdale, IL 60436 815/730-9011 1-800/937-3355 Fax: 815/730-9036

Rockford, IL 61102 815/961-3160 815/965-1810 Fax: South Holland, IL 60473 708/331-6362 Fax: 708/331-7334 Wauconda, IL 60084 847/526-7700 Fax: 847/526-3565

812/333-9677 Fax: 812/333-9731

Fort Wayne, IN 46808 260/482-8576 Fax: 260/483-4057

Indianapolis, IN 46219 317/544-3411 Fax: 317/544-3420 Lafayette, IN 47905 765/447-6933 Fax: 765/448-9038 South Bend, IN 46619 574/232-1461 Fax: 574/233-3324

www.nortrax.com

www.brookstractor.com

Ashland, WI , 715/682-5522

Grand Rapids, MN 218/326-9427

Chippewa Falls, WI 715/834-2924

Escanaba, MI 906/789-9054

Monico, WI 715/487-5583

Louisville, KY 502/253-3721

Mosinee, WI 715/693-3820

Richmond, KY 859/623-2030

Duluth, MN 218/722-7456

Bowling Green, KY 270/842-3400

Bemidji, MN 218/759-1996

London, KY 606/862-8447

Sun Prairie 1900 W. Main St. P.O. Box 9 Sun Prairie, WI 53590 608-837-5141 Milwaukee 12101 W. Silver Spring Dr. Milwaukee, WI 53225 414-462-9790 De Pere 1031 Lawrence Dr. De Pere, WI 54115 920-336-5711 West Salem 451 W. Avenue N. West Salem, WI 54669 608-786-2644 Plover 5429 Prairie Dr. Plover, WI 54467 715-254-2777

Page 52 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

A Authorized uthorized D Doosan oosan D Dealers ealers

LLuby uby E Equipment quipment

ILLINO ILLINOIS IS

K KENTUCKY ENTUCK Y

LLuby uby E Equipment quipment

Bobcat Bobcat o off Bo Bowling wling G Green reen

C Cape ape G Girardeau irardeau

Q Quincy uincy

Bowling B owling g Green Green

2 217-222-5454 17-222-5454

2 270-842-4253 70-842-4253

www.lubyequipment.com w w w.lubyequipment.com

w www.lubyequipment.com w w.lubyequipment.com

www.bgbobcat.com w w w.bgbobcat.com

5 573-334-9937 73-334-9937

NEBRASKA NEBR ASK A INDIANA INDIANA

MICHIGAN M ICHIGAN

B & W EEquipment quipment

Carleton Ca arleton EEquipment quipment C Co., o., IInc. nc.

Fort Fort Wayne Wayne

C Chesterfield hesterfield

8 800-242-4819 00-242-4819

586-463-3333 586-463-3333

w www.bandwequipment.com/doosan w w.bandwequipment.com/doosan

G Grand rand R Rapids apids 6 616-877-3388 16-877-3388

R Ronson onson Equipment Equipment Co. Co. LL LLC C Lowell Lowell 2 219-696-5680 19-696-5680 • 866-350-5538 866-350-5538 w www.ronsonequipment.com w w.ronsonequipment.com

www.brownsheavyequipment.com w w w.brownsheav yequipment.com

IIronhide ronhide EEquipment quipment

Saginaw Saginaw

M MINNESOTA INNESOTA LLano ano EEquipment, quipment, Inc. Inc. A Anoka noka 7 763-323-1720 63-323-1720

R RTL TL EEquipment, quipment, IInc. nc. Grimes Grimes 5 515-986-0262 15-986-0262

Swisher Swisher 3 319-857-4045 19-857-4045 w www.rtlequipment.com w w.r tlequipment.com

S Sellers ellers EEquipment quipment Inc. Inc. Wichita Wichita 3 316-943-9311 16-943-9311

70 701-662-5331 1-662-5331

dba d ba Bobcat Bobcat of Grand Grand Forks Forks Grand G rand FForks orks

w www.lanoequip.com w w.lanoequip.com

Bobcat Bobcat of of St. St. Louis Louis 5 573-886-9435 73-886-9435

w www.bobcatofstl.com w w.bobcatofstl.com

w www.sellersequipment.com w w.sellersequipment.com

W WISCONSIN ISCONSIN S Swiderski widerski EEquipment, quipment, IInc. nc. A Antigo ntigo 7 715-623-4668 15-623-4668

Mosinee Mosinee 7 715-693-3015 15-693-3015

Thorp T horp

7 715-258-3266 15-258-3266

7 701-572-5050 01-572-5050 w www.goironhide.com w w.goironhide.com

Waupaca Waupaca Wausau Wausau 7 715-675-2391 15-675-2391 w www.swiderskiequipment.com w w.swiderskiequipment.com

OHIO OHIO Cincinatti Cincinatti 513-874-8945 513-874-8945 • 8 800-589-2281 00-589-2281

C Columbus olumbus 6 614-876-1116 14-876-1116 w www.bobcat-ent.com w w.bobcat-ent.com

G Gibson ibson M Machinery achinery LLC C Cleveland leveland 4 440-439-4000 40-439-4000 w www.gibsonmachinery.com w w.gibsonmachiner y

Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2015 Doosan Infracore Construction Equipment America. All rights reserved. | 0215304

w www.dieselmachinery.com w w.dieselmachiner y.com

d dba ba B Bobcat obcat of of W Williston illiston Williston Williston

Valley Valley Park Park 6 636-225-2900 36-225-2900 • 800-782-0854 800-782-0854

S Sioux ioux Falls Falls 6 605-336-0411 05-336-0411 • 8 800-456-4005 00-456-4005

7 715-669-5255 15-669-5255

Bo Bobcat bcat E Enterprises, nterprises, Inc. Inc.

M MISSOURI ISSOURI

R Rapid apid Ci City ty 605-348-7438 605-348-7438 • 8 800-658-3047 00-658-3047

701-772-5006 701-772-5006

S Shakopee hakopee 952-445-6310 952-445-6310 • 8 877-753-6100 77-753-6100

C Columbia olumbia

K KANSAS ANSAS

N NORTH OR T H D DAKOTA AKOTA dba Bobcat Devils d ba B obcat of D evils Lake Lake Devils Lake D evils La ke

IIOWA OWA 5 515-232-8456 15-232-8456 • 800-723-5460 800-723-5460

402-895-6660 402-895-6660

Aberdeen Aberdeen 605-725-4364 605-725-4364 • 8 888-762-6312 88-762-6312

w www.bobcat-omaha.com w w.bobcat-omaha.com

Kalamazoo Kalamazoo

w www.carletonequipment.com w w.carletonequipment.com

Am Ames es

Omaha Omaha

2 269-343-2943 69-343-2943 • 8 888-380-6420 88-380-6420 9 989-777-6666 89-777-6666

B Brown’s rown’s H Heavy eavy E Equipment, quipment, Inc. Inc.

Bobcat Bobcat o off Om Omaha aha

S SOUTH OUTH D DAKOTA AKOTA D Diesel iesel M Machinery, achinery, IInc. nc.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 53

“I WOULD RECOMMEND THIS EQUIPMENT TO ANYBODY, AND WE DO ALL THE TIME.”

DDoosanEquipment.com/win1 oosanEquipment.com /win1

WIN

A ONE-YEAR LEASE OF A

CRAWLER CRAWLER EXCAVATOR EXCAVATOR

Darin Sweeney, Operations Manager – REV DRILL Sales & Rental, Inc. Fredrick, MD

Go online to see why Darin runs Doosan. DoosanEquipment.com/Darin11 Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2015 Doosan Infracore Construction Equipment America. All rights reserved. | 0215304

Page 54 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALLU Assists in Win-Win Scenario, Sullair Launches Performs In Situ Mass Stabilization Newly Enhanced Sullube Lubricant In a win-win scenario for safe disposal of dredged harbor sediment and the need for additional fill material for closure and capping of a wastewater pond, planners and contractors turned to ALLU-brand equipment to perform insitu mass stabilization. The overall project, funded by the U.S. EPA’s Great Lakes Restoration Initiative and managed by the U.S. Army Corps of Engineers, included plans to dredge 120,000 cu. yd. (91,746 cu m) of sediment from the Ashtabula Harbor in Ohio. Plans called for placing this dredged treated sediment into an existing wastewater settling pond near the Harbor. This suited the pond owner’s needs to provide additional fill material to create and support a crowned cap during closure of the pond. The Ohio EPA-approved closure plan for the 9-acre pond included dewatering of the existing contents in order to physically support the additional material being placed within the pond’s embankments. Decanting and de-watering operations were compli-

The project managers turned to in situ mass stabilization of the existing pond contents to provide geotechnical properties needed to support the additional material. The insitu mixing devices being used are two ALLU Power Mixers (PM).

Sullair, an industry leader in compressed air solutions since 1965, announced the launch of the newly enhanced Sullube air compressor lubricant, produced by The Dow Chemical Company. Used in more than 50,000 compressors around the world, Sullube is a high-performance Polyglycol-based lubricant that prevents the formation of varnish — a leading cause of air end failure — and helps keep compressors running clean and cool. Originally introduced nearly 30 years ago by Sullair and Dow after more than 8 years of research, development and testing, today’s Sullube has been enhanced to meet the demanding needs of modern rotary screw air compressors. Beyond its ability to protect and clean compressor air ends, Sullube’s new formulation now improves lubricant life up to 10,000 hours, according to the manufacturer. “Sullair has a strong reputation for the durability of its air compressors,” said Tim Kruto, senior product manager, aftermarket products, Sullair. “And Sullube has played a The overall project, funded by the U.S. EPA’s Great Lakes Restoration major role in helping keep our air compressors running Initiative and managed by the U.S. Army Corps of Engineers, included plans to dredge 120,000 cu. yd. (91,746 cu m) of sediment from the optimally. This new formulation combines the benefits Sullube has historically provided, and adds additional value Ashtabula Harbor in Ohio. with the extended fluid life all backed by the expertise of cated by the effects of Hurricane of a mass stabilization project. The Dow.” Sandy, which inundated the pond in high mixing shear of PMs make the most efficient use of binders and October 2012. The project managers turned to in increase production rates. “Sullair has a strong reputation for In some areas of the pond, previoussitu mass stabilization of the existing pond contents to provide geo-technical ly excavated material is being mixed the durability of its air compressors.” properties needed to support the addi- with binder by using an ALLU screentional material. Insitu mass stabiliza- er/crusher. This attachment resembles Tim Kruto tion involves mixing a binding agent an open-bottomed excavator bucket. Sullair into approximately 200,000 cu. yd. Rows of drums within the attachment (15,291 cu m) of pond sediment. The size-reduce and screen material According to Flavio Kliger, market portfolio director of insitu mixing devices being used are scooped into the attachment as the two ALLU Power Mixers (PM). material passes through. Perfect for performance lubricants, Dow Chemical Company, “Dow An ALLU PM is an attachment to an mixing binding agent into piled materi- and Sullair share an uncompromising commitment to quality that creates the perfect foundation for our partnership in excavator resembling a rototiller on a al. stem. Powered by the excavator’s “ALLU power mixers and screen- producing Sullube. We look forward to continuing our work hydraulic system, each PM has two er/crushers continue to prove to be con- together enabling Sullair to provide the rotary screw air comrotating mixing drums that quickly and venient and versatile tools for contrac- pressor market with high performance lubricants, as we have thoroughly mix binding agents into the tors involved in geotechnical and envi- for over three decades.” The Sullair/Dow relationship is more than just a supplipond contents ranging in depths of 5 to ronmental projects. The mixing effi20 ft. (1.5 to 6 m). The binding agents ciencies of our equipment make the er/customer relationship. The Dow Chemical Company has are injected pneumatically directly to best use of valuable resources such as relied on Sullube to help keep its own compressors running the area being mixed by a nozzle locat- binders and improve production rates optimally. “We have counted on Sullair for its best-in-class efficiened between the drums. for our contractor clients. We’re proud The geotechnical performance stan- that our equipment is being used in a cy and reliability for more than 30 years and look forward to dards for the mass stabilization of the project that contributes to the environ- continuing that strong relationship with them for years to pond contents include attaining an mental improvement and economic come,” said Keith Kenebrew, associate commercial director unconfined compressive strength of vitality of the Harbor while lowering of Dow Hydrocarbons & Resources LLC. To launch the improved formulation of Sullube, Sullair 1,000 to 1,500 psf and an unconsolidat- the closure costs of the pond,” said ed shear strength goal of 1,250 psf. Chuck Wilk, ALLU’s manager of mass and Dow have been conducting training sessions and webiThese strengths are being achieved stabilization and remediation applica- nars with Sullair distributors throughout the world. Additionally, a Web site has been launched — Sullube.com with 10 to 20 percent addition of bind- tions. (This story also can be found on — to provide additional information and resources about ing agent, percentage addition varied according to the consistency of materi- Construction Equipment Guide’s Web Sullube and other Sullair compressor lubricants. (This story also can be found on Construction Equipment al being treated. The cost of binders site at www.constructionequipmentGuide’s Web site at www.constructionequipmentguide.com.) may be 50 percent or more of the cost guide.com.)

Pages 55-67

Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

The hydraulic cylinders of the Terex Fuchs MHL350 material handler are positioned specifically for lifting, not digging, so it offers high lift capacities throughout its 52.5-ft. (16 m) reach.

(L-R) are Jeff Kully, secretary/treasurer — City Iron; Chuck Rosenberg, president — City Iron; Jay Young, scrap & recycling sales manager — Roadbuilders Machinery; Louis S. Kully — Chairman, City Iron; and Mike Myslicki, regional sales manager — Terex Fuchs.

Still Growing: Iron and Metal Enters Its Second Century By Rick Zettler SPECIAL TO CEG

The year was 1914. Henry Ford introduced the assembly line for the Model T; Babe Ruth made his debut as a pitcher; and a Lithuanian immigrant founded what is now City Iron and Metal Company in Hastings, Neb. Gabriel Rosenberg started Hastings Hide and Fur, which purchased hides, deer skins and fur from local citizens. In what seems at the surface to be an odd pairing, the company began accepting scrap metal in 1916 and eventually changed its name to City Hide and Metal Company in 1934. This shrewd move gave farmers a place to offload old scrap metal and the company another product to resell. “We were in the recycling business well before it became a movement,” said City Iron and Metal Company President Chuck Rosenberg, grandson of Gabriel Rosenberg. Throughout the decades, scrap metal progressively became more important to the company’s success, and, in 1985, it dropped the hide business to focus solely on recycling. The name was changed

to City Iron and Metal, from City Hide and Metal Company, and the company is still today located in the heart of downtown Hastings. Mergers and acquisitions helped the company expand its scrap operation. A 1990 merger with Hasting’s scrap metal division of Kully Metal and Supply formed CIMCO Inc. dba City Iron and Meal and returned familiar faces to City Iron’s board of directors. “My grandfather, Louis Kully, was a partner of Gabriel from 1918 to 1934,” said L. S. Kully, CEO and chairman of the board of City Iron and Metal. City Iron acquired another local scrap operation, the H. M. Zuber Company, and absorbed it into CIMCO Inc. in 1995, leaving City Iron the sole scrap recycling business in town. This gave the company an opportunity to broaden its customer base and the types of material it accepts. Moving Toward Modern A key ingredient to this familyrun company's success is leadership experience. The company's founder, Gabriel, led the business for 50 years, and David Rosenberg, Gabriel's son, was with the busi-

ness for 60 years. Chuck represents the third generation of Rosenberg ownership and is celebrating his 39th year with City Iron along with 3rd generation L.S. Kully and 4th generation Jeff Kully secretary/treasurer. “Originally I was reluctant to join the family business,” said Rosenberg, who received his degree in industrial designing and worked for other companies before joining City Iron. However, David’s persistence won out, and

he went to work in the scrap yard. Chuck spent his first two years on a massive cleanup and organization effort to help move this “junkyard” into a modern recycling center. “My industrial education helped with the cleanup efforts,” he said, “and I spent 15 years in the yard before moving into the office. Hands-on experience helps you to become a better owner and buyer.” When Chuck first worked in the yard, City Iron still used cable

In business for more than 100 years, City Iron started accepting scrap from farmers in 1916. To this day, scrap from farmers still makes up a significant portion of the product taken in.

cranes to load material into rail cars. Much effort was exerted to install a generator for running the crane’s magnet, and the crane required skilled operators. “There were two upper levers,” said Rosenberg, “and the operator had to use both feet to run it and load scrap. Operators were worn out by the end of the shift.” Eventually replacing cable cranes for loading, unloading and stacking scrap, hydraulic excavators were much easier to operate than the cranes, and there was no cable sway when handling material. However, customization was still required to adapt the excavators for scrap handling. Rosenberg recalled installing generators and the stationary cabs as minor drawbacks to the design. “The low-lying cabs did not allow the operator to see over the sides of railcars and high-wall trailers, which made it difficult to load material,” he said. The excavators could be equipped with elevated cabs, but they were fixed, not hydraulically elevating. Limited reach, far less than that of the cable cranes, proved to be a see GROWTH page 56

Page 56 • February 28, 2015 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Company Evolves, Moves to Excavators GROWTH from page 55

Alta Equipment Company www.altaequipment.com 28775 Beck Rd. Wixom, MI 48393 (248) 449-6700 Fax: (248) 449-6701

28855 Smith Rd. Romulus, MI 48174 (734) 641-8238 Fax: (734) 641-8334

2470 W. Columbia Ave. Battle Creek, MI 49015 (269) 965-1269 Fax: (269) 965-1881

1524 Champagne Dr. Saginaw, MI 48604 (989) 752-9400 Fax: (989) 752-9834

8840 Byron Commerce SW Byron Center, MI 49315 (616) 878-7450 Fax: (616) 878-7650

7500 E. 15 Mile Rd. Sterling Hts., MI 48312 (586) 977-6000 Fax: (586) 977-6099

4716 Talon Ct. S.E. Kentwood, MI 49512 (616) 698-2960 Fax: (616) 698-2901

476 US 31 South Traverse, MI 49685 (231) 943-3700 Fax: (231) 943-8110

6327 Jomar Ct. Lansing, MI 48917 (517) 272-5033 Fax: (517) 272-7257

56195 Pontiac Trail New Hudson, MI 48165 (248) 356-5200 Fax: (248) 356-2029

5920 Grand Haven Rd. Muskegon, MI 49441 (231) 798-8754 Fax: (231) 798-9387

9433 Riley St. Zeeland, MI 49464 (616) 748-4108 Fax: (616) 748-4120

Brandeis Machinery & Supply Co. www.brandeismachinery.com Evansville, IN • (812) 425-4491 Ft. Wayne, IN • (260) 489- 4551 Indianapolis, IN • (317) 872-8410 Corbin, KY • (606) 528-3700 Lexington, KY • (859) 259-3456 Louisville, KY • (502) 491-4000 Paducah, KY • (270) 444-8390 Stanville, KY • (606) 478-9201

ly led him to believe material handlers with track undercarriages were required. He thought the tracks provided stability and the ability to move about the unpaved yard, but Young had another idea for City Iron. “Even though the yard is unpaved, my recommendation to Mr. Rosenberg and Mr. Kully was to go with a tire machine, one specifically designed for scrap handling,” said Young. “Tire machines can get around the yard faster, and the outriggers are quickly deployed to offer lifting stability.”

uration efficiently handles the bulky items commonly received by City Iron. much bigger disadvantage, and lift “The handler delivers very precise capacity was restricted at the end of movements, and the grapple offers 360 their reach. degree rotation, which is a plus when “Excavator hydraulics are set up for loading bulky material into a trailer or digging, so they are not well equipped railcar,” said Rosenberg. “The grapple to handle much weight when the boom can grab about three times as much is extended,” said Jay Young, scrap and material than the magnet, which helps recycling sales manager of with loading speed.” Roadbuilders Machinery and Supply With speed and efficiency being critCompany, Kansas City, Kan., an ical for City Iron, its workers are enjoyauthorized distributor of Terex Fuchs ing a couple of specific features found equipment. on the Terex Fuchs MH L340 and MH “You can only reach so far with an L350 handlers. excavator, and there was too much “These machines offer a much stress and strain put on the fittings greater reach than excavators, and when lifting heavy scrap material they have hydraulic cylinders at the end of their reach,” positioned specifically for lifting, Rosenberg said. not digging,” said Young. Changing customer demoRosenberg added, “The graphics added to the noticeable hydraulically elevating cabs [the shortcomings of excavator proMHL350 offers a maximum eye ductivity in this application. What level of 19-ft. (5.8 m) and the MH was once a predominantly agriculL340 a 17.7-ft. (5.4 m) maximum tural customer base is today more eye level] allow our operators to industrial and peddler. The comsee into high-wall trailers, so they pany now takes in all shapes and can be properly loaded. sizes of material. Everything on the Terex Fuchs “When I first started in the busimachines is built for speed and ness, 90 percent of what entered efficiency. The two Terex Fuchs our yard was prepped steel,” said material handlers move more Rosenberg. “Today, 90 percent is material than four cable cranes.” uncut, heavy and bulky.” Young’s recommendation to go The company also is taking in a Over the years, the company has evolved with wheeled material handlers is broader spectrum of material than from cable cranes to excavators to today’s it has at any other point in its 100- preferred, purpose-built Terex Fuchs materi- paying off for City Iron. The year history. Beyond multiple al handlers, which offer the right combina- Terex Fuchs handlers offer workgrades of steel and cast iron pur- tion of reach and power to boost efficiency. ing speeds of up to 3.1 mph (5 kmh) and a maximum travel chases, the company also processRosenberg also considered the cost speed reaching 12.4 mph (20 kmh) to es manganese, steel shavings, 20 different grades of aluminum, 12 grades of difference between the two drive sys- quickly navigate the 2.5 acre (1.0 hectare) property. copper, and six grades of brass and tems. “It is more expensive to maintain a “The solid rubber tires hold up well, stainless steel. Efficient material sorting and stockpiling is essential, and the track machine and replace rollers, bear- and the dividers keep mud and debris limitations of the excavators proved to ings and final drives,” he said. “Plus the from getting in between the wheels,” tracks can get packed with mud, which said Rosenberg. “It’s all about speed in be a significant hindrance. our business, and the Terex Fuchs han“Turn speed is key, especially for is abrasive and causes wear.” City Iron worked with Roadbuilders dlers help us to do our jobs better, make small operations like ours,” said Rosenberg. “We must turn over materi- Machinery to purchase two purpose- us more competitive and allow us to al daily and live-load four to five semi’s built rubber-tire material handlers from keep up with the volume.” a manufacturer with just as long of a Switching to the purpose-built mateeach day.” history, supplying equipment for 125 rial handlers, once a decision made years. A Terex Fuchs MHL350 materi- with a bit of apprehension, was the Evolution Complete To achieve the next level of efficien- al handler was equipped with a five- right choice for the well-established cy, City Iron embarked on a major tine grapple, while the smaller City Iron. “Initially we thought the material expansion project in 2010 at the facili- MHL340 handler has a magnet attachment. handlers would be a little bit more than ty, one that included construction of a “I was impressed that the generator what we could afford,” said Rosenberg. new non-ferrous warehouse and the and controls for operating the magnet “As time went by, we realized we acquisition of new trucks, trailers, balers, forklifts and a shear. The com- were integrated into the machine’s couldn’t afford to be without the matepany also purchased modern material design, so no modifications were nec- rial handlers.” (This story also can be found on handlers to help give a boost to materi- essary,” said Rosenberg. Construction Equipment Guide’s Web The MHL350 machine’s 1 cu. yd. al processing efficiency at the yard. Rosenberg's experience with cable (0.76 cu m) grapple at the end of its site at www.constructionequipmentcranes and modified excavators initial- 52.5-ft.-long (16 m) boom/stick config- guide.com.)

Construction Equipment Guide â&#x20AC;˘ Recycling Section â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ February 28, 2015 â&#x20AC;˘ Page 57

The desired impact

New LokotrackÂŽ LT1213Sâ&#x201E;˘ The Metso LokotrackÂŽ LT1213STM is a fully equipped mobile impactor plant with a high-capacity single deck screen and return conveyor. t 5IF IJHI WPMVNF JNQBDU DSVTIFS DPNCJOFT proven performance and reliability t &Ăł DJFOU QPXFS USBOTNJTTJPO QSPWJEFT VQ UP 20% lower fuel consumption t $PNQBDU EJNFOTJPOT BOE FBTZ TFU VQ EFMJWFS superior mobility t /FX GFBUVSFT BOE JNQSPWFE TFSWJDF BDDFTT ensure easy and safe operation For more information, contact your local Metso distributor today. www.metso.com/lokotrack

The Lokotrack LT1213S mobile impactor plant with screen and return conveyor delivers maximum productivity and jobsite flexibility

BUTLER MACHINERY CO.

RB SCOTT COMPANY INC.

www.butlermachinery.com 3402 36th St. SW Fargo, ND 58014 701-280-3100 800-726-7475

2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400

www.rbscott.com 1011 Short St. Eau Claire, WI 54701 715-832-9792 Fax: 715-832-7767

4950 E Highway 12 Aberdeen SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850

3630 Miriam Ave. Bismarck, ND 58501 701-223-0890

1201 S. 46 St. Grand Forks, ND 58201 701-775-4238 th

3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

4949 Juergen Rd. Grand Island, NE 308-384-2620

4115 S. 90th St. Omaha, NE 402-331-9200 5601 Fletcher Ave. Lincoln, NE 402-325-0447

1001 S. 7th St. Kansas City, KS 66105 913-371-3822 Fax: 913-371-3870

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuilders machinery.com

Des Moines, IA 50317 800-247-2400 515-964-8600 Fax: 515-309-0667

4219 E. 50th St.

www.centralsands.com

20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400

1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508

CENTRAL SERVICE & SUPPLY, INC.

AIS CONSTRUCTION EQUIPMENT CORP. 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Fax: 517-321-4191 www.aisequip.com

Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583

Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax:â&#x20AC;&#x2C6;616-538-0449

Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257

Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311

West Detroit, MI 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

Page 58 • February 28, 2015 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 7910 Highway 2W Devils Lake, ND 58301 701-665-3800 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 3402 36th St. SW Fargo, ND 58104 701-280-3100 800-726-7475

1201 S. 46th St. Grand Forks, ND 58201 701-775-4238 17040 Hwy 11 Hankinson, ND 58041 701-242-7474 7695 Highway 18 S. Hoople, ND 58243 701-894-6363 1910 27th Ave SE Jamestown, ND 58401 701-251-1400 1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508

4950 E. Highway 12 Aberdeen, SD 57401 605-225-6240 1715 US Hwy 14 W. Huron, SD 57350 605-353-1200 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

www.fabco.com

LaCrosse, WI 608-783-4891 Eau Claire, WI 715-874-5100 Wausau, WI 715-359-6220

Green Bay, WI 920-498-8000 Superior, WI 715-398-9696 Marquette, MI 906-475-4191

Jefferson City, MO 800-845-9177 Springfield, MO 888-959-2100 Joplin, MO 866-313-1748 Willow Springs, MO 866-628-1717 Cape Girardeau, MO 800-845-9175

Marion, IL 800-845-9179 Metropolis, IL 866-299-6044 Salem, IL 800-845-9176 Troy, IL 866-345-5681 Mt. Carmel, IL 888-769-7247

11200 W. Silver Spring Rd. Milwaukee, WI 53225 414-461-9100 Fax: 414-461-8899 Madison, WI 608-271-6200

www.fabickcat.com One Fabick Drive Fenton, MO 64026 800-845-9188 Foristell, MO 800-539-9217 Columbia, MO 800-791-5401

www.zieglercat.com

CP Offers Red Hawk Road Breaker Chicago Pneumatic Construction Equipment offers the Red Hawk Road in their construction tools lineup, featuring a powerful breaking force, easy portability, minimum vibration and maximum production all in one tool. The gas-powered breaker is ideal for general construction, demolition and road building applications. The Red Hawk Road — the only gas-powered breaker in the Chicago Pneumatic breaker lineup — is easily transported to any job site, and is designed to get the job done faster, combining high percussive energy with high blow frequency. Offering the same power-to-weight ratio as pneumatic or hydraulic breakers without any power source or hoses, the Red Hawk Road delivers a powerful breaking force of 60 joules. With a light weight of 55 lbs. (25 kg), the breaker has a full speed impact rate of 1,440 blows per minute (bpm) and operates with a guaranteed sound power level of 109 dBA. The hand-arm vibration value of the Red Hawk is 14 ft. per second (4.3 m per second) and allows 50 percent longer work time with a one cylinder,

The Red Hawk Road breaker has a full speed impact rate of 1,440 blows per minute (bpm) and operates with a guaranteed sound power level of 109 dBA.

two-stroke engine. Measuring at 36.5in. (92.7 cm) with a width across the handles of 24-in. (61 cm), the Red Hawk Road minimizes vibration reducing the impact on operators while increasing productivity. Featuring a fan-driven cooling system, the Red Hawk Road has a recoil starter with a decompression valve, a redesigned tank cap and electronic ignition for easy start-up in any type of weather. “The Red Hawk Road is the toughest breaker in the Chicago Pneumatic lineup and can be utilized for everything from driving and compacting to cutting and breaking,” said Gus Armbruster, product manager, handheld tools at Chicago Pneumatic. “Delivering more power means increased efficiency and allows workers to be more productive on the job site while still maintaining a comfortable level of operation.” For more information, visit www.cp.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

MINNESOTA BEMIDJI* 5426 Hwy 71 North Bemidji, MN 56601 877-829-9850 BRAINERD 3311 Liberty Lane Brainerd, MN 56401 218-829-9800 BUHL 10081 East Hwy 169 Buhl, MN 55713 218-258-3232 COLUMBUS 13822 West Freeway Drive Columbus, MN 55038-9705 651-982-5600 CROOKSTON 720 3rd Ave SW Crookston, MN 56716-0538 218-281-4245 DULUTH 210 Garfield Ave. Duluth, MN 55802-2696 218-722-6628 FERGUS FALLS 3502 State Hwy 210 West Fergus Falls, MN 56537-4003 218-736-2680 JACKSON 191 Industrial Parkway Jackson, MN 56143 866-847-6401 MANKATO 2145 Howard Drive West Mankato, MN 56003 507-388-1444 MARSHALL 1200 North Hwy 59 Marshall, MN 56258-2761 507-532-4403 MINNEAPOLIS 901 West 94th Street Minneapolis, MN 55420-4236 952-888-4121 ROCHESTER 6340 Hwy 63 South Rochester, MN 55904-8414 507-285-1775

SHAKOPEE 8000 County Road 101 East Shakopee, MN 55379 800-352-2812 ST. CLOUD 2225 255TH Street St. Cloud, MN 56301-8742 320-253-2234 IOWA ALTOONA 1500 Ziegler Drive NW Altoona, IA 50009-7200 515-957-3800 PARTS EXPRESS 515-957-3843 800-752-0856 ZIEGLER RENTAL 1600 Ziegler Drive NW Altoona, IA 50009-7200 515-957-3828 888-270-6258 Fax: 515-957-3881 ATLANTIC 951 Park Drive Atlantic, IA 50022 712-243-1039 877-547-3819 FORT DODGE 3366 5TH Ave. South Fort Dodge, IA 50501-6428 515-576-3161 800-342-1848 MASON CITY 11490 265TH Street Mason City, IA 50401-9656 641-423-7240 800-342-1849 POSTVILLE 308 North Lawler Postville, IA 52162-7802 563-864-7461 800-526-0889 SHELDON 102 Crossroads Drive Sheldon, IA 51201 712-324-5604 855-344-5604 SIOUX CITY 5300 Harbor Drive Sioux City, IA 51111-1114 712-252-4401 800-342-1847

*Parts and rental only

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 28, 2015 • Page 59

www.whayne.com 1400 Cecil Ave Louisville, KY 502-774-4441 Ashland, KY 606-928-3444 Bowling Green, KY 270-843-3275 Corbin, KY 606-528-3140 Dry Ridge, KY 859-823-1500

www.altorfer.com 2600 6th Street S.W. Cedar Rapids, IA 52404 319-365-0551 Fax: 319-365-5639 4712 Buckeye St. Davenport, IA 52802 563-324-1935 Fax: 563-324-2409 #1 Capitol Dr. East Peoria, IL 61611 304-694-1234 Fax: 309-694-4148

Evansville, IN 812-425-4651 Hazard, KY 606-439-4040 Lexington, KY 859-254-2756 Paducah, KY 270-443-3631 Pikeville, KY 606-437-6265

4200 Rodger Street Springfield, IL 62705 217-529-5541 Fax: 217-529-0020 1519 W. Kenyon Rd. Urbana, IL 61801 217-539-1671 Fax: 217-359-6310 3520 Moberly Ave. Hannibal, MO 63401 573-221-8600 Fax: 573-221-7187 701 Highway 24W Moberly, MO 65270 660-263-8200 Fax: 660-263-8203

www.macallister.com 7515 East 30th St. Indianapolis, IN 46219 800-382-1896 Fort Wayne, IN 800-944-0847 South Bend 800-685-9849 Lafayette, IN 800-283-4231 Washington, IN 800-932-5120 Terre Haute, IN 800-273-5650

www.ohiocat.com Cleveland, OH 440-526-6200 800-837-6200 Fax: 440-526-9513 Cadiz, OH 740-942-4626 800-837-6204 Fax: 740-942-4029 Canton, OH 330-478-6525 800-837-6207 Fax: 330-478-6529 Cincinnati, OH 513-771-0515 888-332-4658 Fax: 513-672-7658 Columbus, OH 614-878-2287 888-441-4658 Fax: 614-851-5015

COMMITTED TO YOUR

SAFETY

Toledo, (Perrysburg) OH 419-874-7975 888-339-4658 Fax: 419-873-8255 Troy, OH 937-335-7660 888-330-4658 Fax: 937-335-6447 Youngstown, OH 330-530-9010 800-837-6203 Fax: 330-530-9102 Zanesville, OH 740-453-0563 800-837-6205 Fax: 740-452-3605 Richwood, KY 859-372-4665 888-446-4658 Fax: 859-372-4659

Solve safety issues and you’re ready for work—without interruptions. That’s why the new Cat® MH3037 reduces slips, trips and falls with ground-level cab access—whether the cab is in front, behind or to one side of the machine. Combine that with a rear-view camera, sensors that prevent out-of-position operation and other safety features, and you have a machine that’s built for business. Your business.

Cat.com © 2014 Caterpillar • All Rights Reserved • Printed in USA logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as ATERPILLAR, TERPILLAR, BUILLTT FOR ITT,, their respective resp CAT, CA corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Page 60 • February 28, 2015 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Illinois

Indiana

Michigan

Minnesota

Ohio

Midwest Crushing & Screening

Powerscreen Indiana, Inc.

Powerscreen of Michigan

Theco, Inc.

AGGCORP

7144 N Harlem Ave. Chicago, IL 60631 midwestcrushandscreen@gmail.com 847.271.5027

255 N Hetzler Court Angola, IN 46703 www.powerscreenindiana.com 313.841.8370

36639 Groesbeck Hwy. Clinton Township, MI 48035 www.powerscreenofmichigan.com 586.229.2882

5470 Quam Ave. NE St. Michael, MN 55376 www.thecoinc.com 800.776.0335

22800 Lakeland Blvd. Cleveland, OH 44132 www.aggcorp.net 614.309.6854

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 28, 2015 • Page 61

Attachments can make your machine more valuable. Allied offers a wide assortment of attachments to fit all of your makes and models of excavator, loader/backhoe, mini-excavator, skid-steer or compact track loader machines. Allied has become attached to your machines. Allied’s construction and demolition attachments are productive and dependable. State-of-the-art technology.Full product line. Competitive price and performance. Allied offers innovative, problem-solving capabilities. Commitment to product availability. Superior product support. Strong Distributor network. Most of all Allied meets and exceeds customer performance expectations. To put a high performance Allied attachment on your machine, call us at 1-800-321-1046 or visit AlliedCP.com for the name of a Distributor nearest you. We’ve become attached to your machines.

CONSTRUCTION MACHINERY COMPANY www.cmcky.com 2911 S. English Station Rd. Louisville, KY 40299 502-267-4020 866-901-2262 Fax: 502-261-9251

2235 Ragu Drive Owensboro, KY 42303 270-683-2000 877-683-2262 Fax: 270-683-3727 267 W. Jay Louden Rd. Carrollton, KY 41008 502-732-4661 Fax: 502/732-8355

ILLINOIS TRUCK & EQUIPMENT

HOWELL TRACTOR AND EQUIPMENT

www.iltruck.com 320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486

www.howelltractor.com 480 Blaine St. Gary, IN 46406 800-852-8816 Fax: 219-977-6395 2770 May Rd. Peru, IL 61354 815-224-3003 Fax: 815-224-2538

Page 62 • February 28, 2015 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

THE LEADER IN TECHNOLOGY: THE NEW MC 110 EVO

MC 110 Zi EVO Continuous Feed System

MC 110 Ri EVO High-tech jaw crusher

Direct drive via fluid clutch

High production, quality product with maximum efficiency, the all new Kleemann EVO jaw crusher.

ROAD AND MINERAL TECHNOLOGIES

Shepherdsville, Kentucky P.O. Box 6588 335 Saltwell Drive Shepherdsville, KY 40165 Toll Free: 877-538-3221 Phone: 502-543-3746 Fax: 502-543-3716

Evansville, Indiana Fort Wayne, Indiana Indianapolis, Indiana Corbin, Kentucky Lexington, Kentucky Louisville, Kentucky Paducah, Kentucky Stanville, Kentucky

www.wirtgenamerica.com Carterville, Illinois 1505 Donna Drive Carterville, IL 62918 Phone: 618-985-3399

Escanaba, Michigan 2600 S Lincoln Road Escanaba, MI 49829 Phone: 906-786-6920

Eau Claire, Wisconsin 7417 Margaret Lane Eau Claire, WI 54703 Phone: 715-874-5400

Springfield, Illinois 816 N Dirksen Parkway Springfield, IL 62702 Phone: 217-789-7711

Marengo, Illinois 18210 Beck Road Marengo, IL 60152 Phone: 815-923-4966

DeForest, Wisconsin 604 Stokely Road DeForest, WI 53532 Phone: 608-842-4151

Franksville, Wisconsin 2916 N Sylvania Ave Franksville, WI 53126 Phone: 262-835-2710

Bolingbrook, Illinois 220 East Frontage Road Bolingbrook, IL 60440 Phone: 630-739-7474

Portage, Indiana 6550 Melton Road Portage, IN 46368 Phone: 219-764-8080

DePere, Wisconsin 3275 French Road DePere, WI 54115 Phone: 920-532-0165

Schofield, Wisconsin 9808 Weston Avenue Schofield, WI 54476 Phone: 715-355-9898

Bridgeton, Missouri 4670 Crossroads Industrial Dr. Bridgeton, MO 63044 Phone: 314-291-1330 Cape Girardeau, Missouri 3364 Percy Drive Cape Girardeau, MO 63702 Phone: 573-334-5252

Columbia, Missouri 4110 I-70 Drive SE Columbia, MO 65201 Phone: 573-814-0083 Palmyra, Missouri 701 Industrial Drive Palmyra, MO 63461 Phone: 573-769-2056

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 800-352-2757

Construction Equipment Guide â&#x20AC;˘ Recycling Section â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ February 28, 2015 â&#x20AC;˘ Page 63

5)& 0/-: 5)*/( 4530/(&3 8*-- #& :063 #0550. -*/&

t #364) $)*11&34 t 456.1 (3*/%&34 t 8)0-& 53&& $)*11&34 t #&"45 3&$:$-&34 t '03&453: .08&34

The industryâ&#x20AC;&#x2122;s toughest, longest lasting woood processing equipment is available through th the worldwide network of authorized Bandit dealers. ale Contact yours today and see how a Bandit dit chipper,, grinderr,, or recycler can help boost your operationâ&#x20AC;&#x2122;s bottom line.

1-800-952-0178

#"/%*5$)*11&34 $0. # "/%*5$)*11&34 $0.

SMALL EQUIPMENT DEALERS (BRUSH CHIPPERS, STUMP GRINDERS, ARBORVVAC)

N. River 50505050 N. River Rd. Rd. Schiller IL 60176 Schiller Park, Park, IL 60176 847-678-3633 847-678-3633 847-678-3587 Fax: Fax: 847-678-3587 Mokena, IL Mokena, IL 708-596-8050 708-596-8050 West Chicago, IL West Chica go, IL 630-293-0606 630-293-0606

WWauconda, auconda, IL IL 847-526-4255 847-526-4522 YYorkville, orkville, IL IL 630-553-0150 630-553-0150

www.atlasbobcat.com www.atlasbobcat.com

12001800 W. W Hwy 1313East . Hwy Burnsville, 55337 Burnsville, MN MN 55337 952-894-0894 952-894-0894 877-262-2284 877-262-2284 3101 Spruce St. 3101 Spruce Little Canada, MNSt.55117 Little651-407-3727 Canada, MN 55117 651-407-3727 877-331-0295 877-331-0295

LARGE EQUIPMENT DEALERS (BEAST (BEAST, WHOLE TREE CHIPPERS, FORESTRY MOWERS)

745 Exchange 745 Exchange DriveDrive Hudson, WI 54016 Hudson, WI 54016 715-531-0801 715-531-0801 866-268-2418 866-268-2418 www.tristatebobcat.com

www.tristatebobcat.com

CoAshland, wen, WV KY 606-928-3477 304-226-3299 Beaver,, WV Cowen, WV 304-255-1525 304-226-3299 Cross Lanes, WV Beaver, WV 304-204-1818 304-255-1525 Fairmont, WV 304-534-5454 Cross Lanes, WV

Fairmont, WV Norton, WV 304-534-5454 304-226-3299 Pikeville, WV

Norton, WV 304-255-1525 304-636-6421 Marietta, OH

Pikeville, KY 304-204-1818 606-432-0321 www.lec1.com www.lec1.com

304-204-1818

For large equipment inquiries in OH, IN,, KY KY, Y, IL,, IA,, MN, Y, M WI and MI,, or if your region is not represented above,, please call us or visit us online for assistance.

Page 64 • February 28, 2015 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Purpose-built

from the ground up by Material handlers from SENNEBOGEN – 444,000 4,000 llbs. bs. tto o 75 7750,000 0,000 llbs. bs. Simple S imple design… design… Lift Lift more. morre. Mov Movee faster.. Save Save fuel. fuel. Run Run longer. ALTA EQUIPMENT COMPANY www.altaconstructionequipment.com

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com

Muskegon, MI 231-798-8754

Sterling Hts, MI 586-977-6000

Kentwood, MI 616-698-2960

Traverse, MI 231-943-3700

Battle Creek, MI 269-965-1269

Zeeland, MI 616-748-4108

New Hudson, MI 248-356-5200

Lansing, MI 517-272-5033

Romulus, MI 734-641-8238

Wixom, MI (Cons. Division) 248-356-5200

Saginaw, MI 989-752-9400

Byron Center, MI 616-878-7450

Louisville, KY 502-491-4000

Stanville, KY 606-478-9201

Evansville, IN 812-425-4491

Paducah, KY 270-444-8390

Corbin, KY 606-528-3700

Indianapolis, IN 317-872-8410

Lexington, KY 859-259-3456

Ft.Wayne, IN 260-489-4551

HOWELL TRACTOR & EQUIPMENT LLC www.howelltractor.com

GIBSON MACHINERY LLC www.gibson machinery.com

Gary,IN 800-852-8816

Cleveland, OH 440-439-4000

Peru, IL 800-342-6072

Pittsburgh, PA 724-695-5000

ROLAND MACHINERY CO. www.rolandmachinery.com

Carterville, IL 618/985-3399

Franksville, WI 262-835-2710

Bridgeton, MO 314-291-1330

DePere, WI 920-532-0165

Columbia, MO 573-814-0083

DeForest, WI 608-842-4151

Cape Girardeau, MO 573-334-5252

Eau Claire, WI 715-874-5400

Palmyra, MO 573-769-2056

Schofield, WI 715-355-9898 Escanaba, MI 906-786-6920

THE VICTOR L. PHILLIPS CO. www.vlpco.com

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com

Kansas City, MO 800-878-9290

Savage, MN 800-888-9515

Milan, IL 800-633-9114

Joplin, MO 800-878-8223

Des Moines, IA 800-555-1445

Duluth, MN 800-888-9535

Brookline Station, MO 800-955-2729

Cedar Rapids, IA 800-616-6615

Virginia, MN 800-752-4304

Wichita, KS 800-878-3346

Sioux City, IA 800-633-9104

Topeka, KS 800-878-4345 Garden City, KS 800-511-1435

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 28, 2015 • Page 65

CRUSHING

MATERIAL MA ATERIAL HANDLING HAN

SCREENING

TRACKS

ZZZ DPVWDWH FRP

ZZZ UPVHTXLSPHQW FRP T S

WASHING W ASHING & CLASSIFYING CL

ZZZ JHQHTXLS FRP Z ZZ JHQHTX T LS FRP

The complete source for equipment in the aggregate, construction and recycling industries. Offering industry-leading brands such as the Vanguard Jaw Crusher, Kodiak® Plus Cone Crusher, SuperStacker® Extendable Stacker, ProSizer® Mobile Screening Plant, Combo® Screen, Vari-Vibe® High-Frequency Screen, Duo-Vibe® High-Frequency Screen, Series 9000 equipment, Fast Trax, Global Track and FastPack.

Aggregate

Recycle

Construction

Infrastructure

Mining

Loading/Unloading

Energy

www.kpijci.com

Page 66 • February 28, 2015 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

GET A HANDLE ON OPERATING COSTS TTerex erex® Fuc Fuchs hs Ma Material terial Handlers

Purpose-built for your scrap yard, transfer station or mill yard, Terex® Fuchs material handlers help you get a handle on your business with: An average 11% reduced fuel consumption versus competitive material handlers An average 45% lower cost of ownership at 1000 hrs versus titi t i l h dl

Penn Jersey Mac hinery Deptford, NJ 856-227-6400

COMPANY WRENCH

Frenchtown, NJ 908-824-4200 4805 Scooby Lane NW

www.companywrench.com

Carroll, OH 43112 866-262-4181 • Fax: 740-687-9130

Lionville, P PA A Cleveland Branch 63-9200 61 0-3 525 Golden Oak Pkwy

Oakwood Village, OH 44146 440-439-4567 • Fax: 440-439-1789

Cincinnati Branch 3120 S. Verity Pkwy. Middletown, OH 45044 513-649-8105 • Fax: 513-649-8107 7019 Brookville Rd. Indianapolis, IN 46239 317-375-7790 Fax: 317-375-7792

terex.com/construction

Chelmsford, MA 800-804-0775

LUBY EQUIPMENT SARGENTS EQUIPMENT Bangor M E SERVICE SERVICES & ,REPAIR www.lubyequipment.com

www.sargentsequipment.com 8-4838 800-69

2300 Cassens Dr. Fenton, MO 63026 636-343-9970 • Fax: 636-343-4811 199 Airport Road Cape Girardeau, MO 63702 573-334-9937

Staten Island, NY Piketon Branch 71Route 8 42348 2444 3668 US South Piketown, OH 740-289-3294

Chadwick-Baross

2999 Mexico Rd. O’Fallon, MO 63366 636-332-9970

281 E. Sauk Trail

Chicago Heights, IL 60411 Caribou, M E• Fax: 708-758-1345 708-758-2062 47 800-270-25 155 Industrial Dr. Gilberts, IL 60136 847-844-4131 Westbrook, Westbrook, e ME 800 0 262-5714

2625 North 24th St. Quincy, IL 62305 217-222-5454 4375 Camp Butler Rd. Springfield, IL 62707 217-744-2233 8853 Petroff Dr. Caseyville, IL 62232 618-397-9971

Celebrating 30 Years POWERSCREEN INDIANA, INC. www.powerscreenindiana.com 255 N. Hetzler Court, Suite C Angola, IN 46703 260-665-5816 • Fax: 260-665-3241

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 28, 2015 • Page 67

Screen your way, every day.

Lokotrack ST2.4 mobile screen The Lokotrack® ST2.4™ is a versatile, compact mobile screen that sets up quickly in just a few simple steps. Robust and reliable, the ST2.4 is built with high-quality components for more uptime and efficiency. Screen media changes are safe and easy with an accessible screen box that raises hydraulically, providing the flexibility you need to meet different process requirements. Learn more by contacting your local Metso distributor today. www.metso.com/lokotrack

BUTLER MACHINERY CO. www.butlermachinery.com

3402 36th St. SW Fargo, ND 58014 701-280-3100 800-726-7475 3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. 46th St. Grand Forks, ND 58201 701-775-4238

1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508 7910 Highway 2 W Devils Lake, ND 58301 701-665-3800 4950 E Highway 12 Aberdeen, SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

CENTRAL SERVICE & SUPPLY, INC. www.centralsands.com 4219 E. 50th St. Des Moines, IA 50317 800-247-2400 515-964-8600 Fax: 515-309-0667

AIS CONSTRUCTION EQUIPMENT CORP. www.aisequip.com state of PA

3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Fax: 517-321-6275 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311

Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 West Detroit, MI 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

Page 68 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SECTION

Trucks & Trailers Pages 69-77

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Kenworth T880 Earns 2015 ATD Truck of the Year Distinction The Kenworth T880 vocational truck with the PACCAR MX-13 engine was named the 2015 Truck of the Year by the American Truck Dealers (ATD) at the annual ATD Convention and Expo in San Francisco, Calif. This year’s competition focused on the vocational and heavy haul/severe duty truck category. During the competition, a panel of judges conducted test drives and evaluated each truck entry in key categories, which included innovation, design, safety, driver ergonomics and comfort. “The Kenworth T880 establishes a new standard of excellence and builds upon Kenworth’s heritage of quality, innovation and technology to produce industry-leading, rugged and reliable vocational trucks,” said Preston Feight, Kenworth general manager. “This 2015 ATD Truck of the Year award reflects the many positive comments we have received from our customers about the T880’s outstanding performance, driver comfort and quiet cab.” Available in day cab and 52-inch sleeper configurations, the Kenworth T880 is for vocational customers who require a durable, reliable and productive truck for demanding

The Kenworth T880 vocational truck with the PACCAR MX-13 engine was named the 2015 Truck of the Year by the American Truck Dealers.

dump, mixer, heavy haul, oilfield, logging and refuse applications. Customers can expect longer service intervals, increased uptime, lower operating costs and high

DuraClass Unveils New Tub Body Line Design DuraClass recently introduced the newly improved HPT “tub” body line. The line has been redesigned to meet all heavy duty dump body needs. The HPT-B1 features a closed fender design, and comes in 14- to 18-ft. (4.2 to 5.5 m) lengths in either carbon steel or stainless steel. The HPT-B1 has capacity ranges from 10- to 20-yd. (9 to 18 m). The HPT-B2 features an open fender design, which decreases the possible areas for rust and decreases the overall body weight. The body comes in 10- and 11-ft. (3 to 3.3 m) lengths in 3/16-in. (.5 cm) AR400 carbon steel, and 14- to 18-ft. lengths in 3/16-in. Hi-Tensile carbon steel. The HPT-B2 also has an option for stainless steel. For more information, call 800/255-4345 or visit www.duraclass.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

resale value. The T880 is standard with the PACCAR MX-13 engine rated up to 500-hp and 1,850 lb.-ft. of torque. The PACCAR MX-13 pro-

vides a lightweight, fuel-efficient engine for vocational applications, including dumps and heavy haul applications over 100,000 lbs. (45,359 kg). The T880 can be ordered with a 116.5-in. BBC hood optimized for the PACCAR MX-13 engine and providing enhanced visibility, or with the standard 122.5-in. BBC hood. The 7 ft. (2.1-m) wide, stamped aluminum cab is robotically assembled at Kenworth factories. The quiet cab has triple-sealed and robust doors and provides a comfortable 23 in. of room between the seats. The T880 also includes an air-assisted hydraulic clutch, complex reflector headlamps, and lightweight, factory-installed lift axles. Kenworth earned the 2013 and 2011 ATD Heavy Duty Commercial Truck of the Year for its T680 and T700 models, respectively. ATD represents more than 2,000 medium and heavy duty truck dealers. ATD members share in National Automobile Dealers Association (NADA) programs, services and benefits. For more information, visit www.atd.org. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

The HPT-B1 features a closed fender design and comes in 14- to 18-ft. (4.2 to 5.5 m) lengths in either carbon steel or stainless steel.

Page 70 • February 28, 2015 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

McCandless Truck Center Receives National Recognition Scott McCandless, president of Aurora, Colo. based McCandless Truck Center LLC, has been named the 2015 Truck Dealer of the Year. The national award focuses on excellence in dealership performance, as well as industry and community leadership. McCandless started his career at his father’s International Truck dealership in Las Vegas in 1972. By holding positions in almost every department of the dealership, McCandless had the opportunity to learn the business from the ground up — from entry level to management. “My father showed me that this business is about taking care of customers, being involved in the community, and developing good working relationships with employees and suppliers,” said McCandless. To illustrate the commitment to his customers, McCandless insists on meeting with customers and suppliers inperson. Also, McCandless rode with the parts delivery and outside parts and truck sales people

“Growing up in the truck dealership environment, Scott [McCandless] learned that every interaction with a customer is important and he instills that philosophy throughout his organization.” Richard Ryan Carolina International Trucks Inc.

for six months in order to learn more about the shop-side of their customers’ businesses and how their parts and service representatives interacted with customers. As a member of the International Truck Product Advisory Board, McCandless played a role in the development and launch of the International ProStar, and he previously served as the chairman of the International Truck Executive Dealer Council. McCandless has fostered and promoted open dialogue with Navistar leaders, which has created a stronger foundation for collabora-

tion and the important work of addressing mutual opportunities for growth. “Scott’s knowledge and industry experience have helped him to build and develop a great team that is dedicated to customer service and high performance,” said Richard Ryan, president, Carolina International Trucks Inc. “Growing up in the truck dealership environment, Scott learned that every interaction with a customer is important and he instills that philosophy throughout his organization.” In the community, McCandless

has served as president of the Fremont County Rotary Club and a member of the Denver Chamber of Commerce. As president of the Rotary Club, he led fundraising to support the organization’s mission to eradicate polio worldwide; he volunteered to give polio shots to disadvantaged children, and supported many of their initiatives such as community refuse cleanups. McCandless also is a vocational volunteer who continues to express the importance of the trucking, transportation and diesel technician fields in the local community.

“Our dealers consistently go beyond the truck itself to provide exceptional service and support that customers demand and deserve,” said Bill Kozek, Navistar president, truck and parts. “We are proud of the McCandless Truck Center team; their professionalism, dedication to the community and their ongoing commitment to outstanding customer service is what sets them apart.” McCandless has had a distinguished career recognized with numerous corporate and industry awards, including the International Truck Circle of Excellence, Warranty Efficiency Award, Service Dwell Time Award, and Diamond Club Parts Sales Achievement Award. In addition, he has been recognized by Idealease as an Idealgold recipient since 2001. For more information, visit www.mctrux.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

TBEI Lake Crystal Names Duraclass HPT-316 Body Engineering, Quality Manager Truck Bodies and Equipment International Inc., (TBEI) recently announced the promotion of Steve Lee to engineering and quality manager at its Lake Crystal, Minn., facility. TBEI’s Lake Crystal facility manufactures the Crysteel, J-Craft and Ox SuperDump lines of dump bodies. “We are excited to expand Steve’s role within TBEI,” said Archie England, TBEI VP of engineering and quality. “Steve is a proven team leader and will continue to be a tremendous asset not only internally but with our distributors as well.” Lee has been with Crysteel/TBEI for more than 20 years, starting as a drafter, and moving to Crysteel engineering manager and TBEI engineering manager. “Working for TBEI has provided me countless opportunities to grow professionally,” said Lee. “I am excited about the new responsibilities and challenges that come with this position. TBEI’s family of brands have always been viewed as high quality products, and I look forward to building on that reputation and continuing to move TBEI forward.” For more information, call 800/533-0494

Steve Lee is TBEI’s engineering and quality manager at its Lake Crystal, Minn., facility.

or visit www.CRYSTEEL.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

The DuraClass HPT-316 heavy-duty dump body provides hauling contractors durability, strength and high payload capacity. The HPT-316 design includes deep flanged longmembers, which eliminates the need for crossmembers. As a result, the HPT-316 is easier to keep clean in harsh environments. Like all premium heavyduty DuraClass dump bodies, the HPT-316 uses high tensile steel throughout for superior strength and lighter body weight than comparable dump bodies, according to the manufacturer. The DuraClass HPT-316 also features fully enclosed front corner posts and is available in lengths from 14- to 18-ft. (4.2 to 5.5 m). Greasable rear hinges have the widest bearing surface and largest pin diameter in the industry. Numerous options also are available for the HPT-316 body. For more information, call 800/255-4345 or visit www.duraclass.com.

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • February 28, 2015 • Page 71

Farm-Rite Equipment Inc.

K.C. Bobcat

McCann

Dassel 901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857

2209 W. 40 Highway Blue Springs, MO 64015 800-697-4228 Fax: 816-229-7631 Olathe, KS 800-598-4228 Platte City, MO 800-984-3001

Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 • Fax: 630-627-8711 Bolingbrook 250 E. North Frontage Road Bolingbrook, IL 60440 630-739-7770 • Fax: 630-739-7699 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 • Fax: 312-421-3502 Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 • Fax: 708-597-9945 McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 • Fax: 815-385-2975 Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 • Fax: 219-865-0269 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 • Fax: 847-526-9448 www.McCannOnline.com

Willmar 1515 West litchfield Ave. Willmar, MN 56201 Toll Free: 877-484-3211 320-235-3672 St. Cloud 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 320-240-2085 www.farmriteequip.com

Page 72 • February 28, 2015 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

800-779-8099

www.sidedump.com

30902 C-38 Le Mars, IA 51031

SmithCo

SIDE-DUMP TRAILERS ***LEADING THE INDUSTRY IN*** *Quality*

*Custom Designs* *Selection* *Customer Service* & *Customer Support*

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • February 28, 2015 • Page 73

+ PLUS CURRENT

SCHEDULED MAINTENANCE1

+ PLUS

2-YEAR/24K

UPFIT CASH

OFFERS

Stack up and save with the new 2015 Business Choice Program! The 2015 Business Choice Program is geared toward providing business owners the best value on vehicles that run your business. Purchase or lease an eligible Chevrolet vehicle and get the new 2-year/24,000-Mile Schedules Maintenance Program1 and stack on any of our Business Choice offers, like the Uplift Cash Allowance2 or the GM Accessory Cash Allowance,3 to save more. You can also add current retail offers to this equation to make it a deal you can’t pass up. Purchasers of 2013-2014 vehicles are eligible for the 2-year/30,000-mile Business Maintenance Program7 along with the Uplift Cash Allowance2 or the GM Accessory Cash Allowance.3 Learn more at gmfleet.com/business-choice-offers.

On select models starting with 2015. eligible vehicles include purchased or leased new 2015 chevrolet cars, trucks, or cross overs in the U.S. covers scheduled oil changes with filter, tire rotations, and and 27-point 27-pointinspections, inspections,according accordingto toyour yournew newvehicle’s ve hicle’srecommended recommendedmaintenance maintenanceschedule, schedule,for foraammaximum aximumofoffour four service events within 2 years or 24,000 miles, whichever comes first. does not include air filters. extra charge may apply for dual-rear-wheel tire rotations. See participating dealer for other restrictions and complete details. Not valid with all offers. allowance amounts include parts and labor. upfit cash is also available for the transfer of an existing upfit. See dealer for details. take delivery by 9/30/15. Fully backed by gm. gm accessories permanently installed at the time of new-vehicle delivery are covered under the new-Vehic le limited Warranty. if installed after delivery, coverage on parts and labor is for the balance of the new-vehicle warranty o r a minimum of 12 months or 12,000 miles, whichever comes first. gm accessories not requiring installation or purchased over the counter carry a 12-month limited warranty on parts only. does not apply to licensed products. take delivery by 9/30/15. 4 Requires Requires available available Snow Snow plow plow prep prep package package (VYu) (VYu) and and Snow Snow plow plow upfit. upfit. Snow Snow plow plow upfit upfit cash cash is is good good ffor or the the transfer transfer of of an an existing existing snow snow plow. plow. take take delivery delivery by by 9/30/14. 9/30/15. 5 Adrian Steel van equipment is warranted to be free from defects in material and workmanship, under normal use and service, f or a period of 3 years or 36,000 miles, whichever occurs first from the date of delivery to the original retail purchaser when installed by an authorized adrian Steel distribu tor. adrian Steel is a registered trademark of adrian Steel. adrian Steel packages available via transportation fee of $200. See dealer for details. take delivery by 9/30/15. 6 To qualify, vehicle must be used in the day-to-day operation of the business and not solely for transportation purposes. must provide proof of business. For co mplete program requirements, including information regarding offers, vehicles, equipment, options, warranties, and ordering, consult your chevrolet dealer or visit gmbusinesschoice.net. take delivery by 9/30/15. 7 According According to to your your vehicle’s vehicle’s recommended recommended maintenance maintenance schedule schedule for for up up to to 2 years years or or 30,000 30,000 miles, miles, whi whichever chever comes comes first. first. does does not not include include air air filters. filters. covers coverssix sixoil oilchanges changesfor forgasoline gasolineengines enginesand andfofour uroil oilchanges changesfor fordiesel. diesel.extra extracharge chargemay mayapply applyfor fordual-rear-wheel dual-rear-wheeltire tirerotations. rotations.See Seeparticipat participati ing dealer for restrictions and complete details. ©2013 general motors. all rights reserved. 2 3

Page 74 • February 28, 2015 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Mack mDRIVE HD to Be Available, Standard in Mack Granite in March

Ditch Witch of North Dakota AIS Construction Equipment Corporation 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000 Fax: 517-321-4191 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449

1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 Fax: 701-282-3636 2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551 Fax: 701-663-0692

65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583

Mack Trucks unveiled a heavy-duty version of Mack mDRIVE automated manual transmission. The mDRIVE HD will be standard equipment on orders as of March in the rugged Mack Granite model.

Mack Trucks unveiled a heavy-duty version of its Mack mDRIVE automated manual transmission. The mDRIVE HD will be available as standard equipment on orders as of March in the rugged Mack Granite model, offering improved performance for demanding on- and off-road applications. “Our construction customers told us they wanted a heavyduty version of the mDRIVE designed specifically to handle rough jobs in tough conditions,” said Stephen Roy, president of Mack Trucks North American Sales and Marketing. “We listened to them and developed a reinforced rugged transmission that will help our customers deliver power, performance, enhanced durability and improved driver satisfaction in a time when the industry is experiencing a driver shortage.” The mDRIVE HD is designed and engineered to work exclusively with Mack MP7 and Mack MP8 engines. The 12-speed mDRIVE HD has an automated clutch, so no clutch pedal is required. Operation of the transmission is controlled through a dash-mounted shift pad by selecting drive, neutral or reverse. For more demanding jobsite maneuvers, the premium shift pad can be operated manually to hold a gear, downshift or upshift. Available in overdrive and direct drive, the mDRIVE HD continuously monitors changes in grade (both up and down), vehicle speed, throttle position, acceleration, torque demand and gross vehicle weight. It automatically chooses the best gear for the road condition, allowing drivers to focus on the terrain rather than shifting gears, increasing safety on work sites. The mDRIVE HD is based on the design of the standardduty mDRIVE, which Mack made standard in the Mack Pinnacle model in October 2014. Compared to conventional automatic transmissions, the mDRIVE HD requires less service, significantly reducing maintenance needs, according to the manufacturer. In the event the mDRIVE HD does require attention, the

transmission can be serviced at any Mack dealer, eliminating the additional time and hassle of visiting a third party service location. In addition, the mDRIVE HD is supported by Mack’s Uptime services, which reduce downtime and maximize productivity through real-time monitoring and proactive repair scheduling. Key features of the mDRIVE HD include: • The mDRIVE HD is lightweight. Including transmission oil, the mDRIVE HD is up to 237 lbs. lighter than other transmission offerings, enabling customers to haul even more payload. • It features reinforced internal components. With stronger gears and synchros, the mDRIVE HD is built to withstand more frequent shifting that is often needed in construction applications. • The mDRIVE HD uses a transmission-mounted oil cooler. The mDRIVE HD’s oil cooler helps maintain an optimal operating temperature, despite repeated, heat-generating shifts common on a job site. • Unique software packages, specific to the customer application, are available with the mDRIVE HD. The “enhanced construction” package provides optimal on/offroad capability and gives the driver full control over any terrain. “EZ shift” delivers smoother shifts for sensitive payloads like livestock or bulk liquids. • The mDRIVE HD offers a rock free feature. Should the vehicle become stuck, this feature allows the driver to rock the truck back and forth simply by pumping the accelerator. • It features grade gripper. Working with the truck’s ABS system, grade gripper allows the vehicle to momentarily hold a hill, giving the driver time to move their foot from the brake to the accelerator pedal without rolling backward. For more information, visit www.macktrucks.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 Fax: 248-437-9750 www.aisequip.com

949 3rd Ave. Windom, MN 56101 507-678-2752

3660 Interchange Road Columbus, OH 43204 614-443-9751 888-DITCHWITCH Fax: 614-443-9219 www.ditchwitchOH.com 9052 Marshall Road Cranberry Township, PA 16066 724-742-2844 888-DITCHWITCH Fax: 724-742-2877 www.ditchwitchPA.com

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • February 28, 2015 • Page 75

Scharber & Sons, Inc. 6140 Highway 10 NW Anoka, MN 55303 763-323-1720 888-448-5266 Fax: 763-422-3949

1015 Highway 212 West Norwood Young America, MN 952-467-2182 Fax: 952-467-3259

13725 Main Street Rogers, MN 55374 763-428-4107 Fax: 763-428-2700 www.scharbers.com

3021 West 133rd Shakopee, MN 55379 952-445-6310 Fax: 952-496-0263 23580 Highway 55 Loretto, MN 55357 763-479-8200 Fax: 763-479-8201

901 Parker Ave. W. Dassel, MN 55325 877-570-2740 www.farmriteequip.com

1929 E. Madison Ave. Mankato, MN 56001 507-387-7376 Fax: 507-387-7399

www.westsidetractorsales.com 1400 W. Ogden Ave. Naperville, IL 630-355-7150

600 Walnut Ct Rockdale, IL 815-730-9011

7355 East 30th St. Indianapolis, IN 46219 317-544-3411

150 W. 162 St. Route 6 South Holland, IL 708-331-6362

2170 South Yost Ave. Bloomington, IN 47403 812-333-9677 Fax: 812-333-9731

3021 South 460 East Lafayette, IN 47905 765-477-6933 Fax: 765-448-9038

3120 Congressional Parkway Fort Wayne, IN 46825 260-482-8576 Fax: 260-483-4057

25166 State Road 2 South Bend, IN 46619 574-232-1461 Fax: 574-233-3324

3110 Prairie Rd. Rockford, IL 815-961-3160 1560 North Old Rand Rd. Wauconda, IL 847-526-7700

Page 76 • February 28, 2015 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

ELZER’S B F F JE Dodge Ram Tough Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications.

TrailMax FWTD-70-PR 8 degree load angle with 33" deck height

Excellent for Pavers!

Design Your Ultimate Work Truck!

Gas-2500, Ready for Plow

2 ram 5500 4x4 108 c/a. please call for spec

2014 Ram 5500 4x4, 84” c/a, Sno-prep, Power Group

NEW PROMASTERS HERE & IN TRANSIT

COMMERCIAL HEADQUARTERS Jeff Belzer Ram Dodge, 21111 Cedar Ave., Lakeville, MN Please Call the Commercial Dept, 1-877-671-8226 OR 952-469-4444 All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change George Miller 952-469-6820 gmiller@jeffbelzer.com

Smart Body SBMT Construction Service Body Modular, Extra Large Toolboxes, Gooseneck Ball, Transfer Tank, Aluminum Deck, Customizable

John Zadurski 952-469-6817 jzadurski@jeffbelzer.com

Brent Loucks 952-469-5077 bloucks@jeffbelzer.com

What’s going on in your company

We want to know! Give us a call.

construction Equipment Guide

Hydraulic Detachable Gooseneck

XL Specialized XL-70-HDG

(800) 523-2200

13HP Honda Motor with aluminum pullouts

FA X:

(800) 222-6047

Smartphone Users Visit Us Online

www.ZipsTransportEquipment.com

(215) 885-2910

WE VULCANIZE

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • February 28, 2015 • Page 77

Start the Year * Right in a Ram Ram 3500

Ram 3500

plus Plow

Cab & Chassis Crew

MSRP $48,965

MSRP $51,300

Winter Special $39,999*

Winter Special $42,999* Choose from 32

Diesels Here

2015 Ram 2500

Promaster 1500

Std. Cab PW/PL/T/C, Auto, HD Package, 6.4 V8, 8’ Blizzard Plow, Back Up Camera

Promaster MSRP $34,965

Winter Special $25,848*

FWD V/6 Auto, P/W, P/L, T/C, A/C

MSRP $47,576

MSRP $31,025

Winter Special $38,599*

Winter Special $25,848*

* COMING SOON: MINNESOTA RAM TRUCK CENTER

#1 Chrysler Corp. Commercial Dealer in Minnesota

The fast lane for small business.

RAM H.D. HEADQUARTERS

18 Cabs and Chassis in Stock More Coming!

We Deliver! 32 Promasters

Ready to Go! FURY MOTORS South St. Paul, Minnesota Truck Master Dick Reineck • 651.251.8214 direct • rreineck@furymotors.com * Pricing represents all Denver business center rebates deducted!

Page 78 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 79

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $105, Color Ad $155

“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 3500 models of construction equip. PNEUMATIC AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states .............................................................Call

5-6 TM

2006 Gehl 7810 Turbo, 115HP, 2260 Hrs, 3675 Lb Lift, 84” Bkt, 2 Speed..................................$30,900 Call Scharber & Sons 763-428-4107 4-5 PK

New Compact Excavators ....Starting at $41,000 Call Dan 612-306-4496 4-5 PK

Kubota BX2360 Tractor, 4 Wheel Drive, Cab & Heat, 50” Snowblower, 385 Hrs, 3 Pt Hitch ...$13,995 Top Notch Equipment 763-398-0079 5-6 PK

2013 Takeuchi TB016, 300 Hrs, OROPS, Hyd Thumb, Coupler, Rubber, 7’9” Dig Depth, 3500# Capacity.....$28,950 Call Steve Samosky • 262/373-2151 5 JM

2005 Takeuchi TL140, 2970 Hrs, Cab, 81 HP, 76” Bkt, 18” Rubber Tracks ...........................................................$24,250 Call Steve Samosky • 262/373-2151 5 JM

2004 Cat 320LC, 9350 Hrs, Hyd Cplr, Hyd Kit, 54” Bkt, 9’8” Stick, 33’ Reach, 48,000# .........................................$66,750 Call Steve Samosky • 262/373-2151 5 JM

1998 New Holland LX885, 1800 Hrs, 72” Tooth Bkt, 2200# Capactiy, 60 hp, 2 Speed, New Engine......................$11,400 Call Steve Samosky • 262/373-2151 5 JM

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. Call McLaren 888-492-4230 4-5 DH

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. Call McLaren 888-492-4230 4-5 DH

2004 Komatsu WA-320-3, EROPS w/AC, Q Coupler, 3rd Valve Courts Machinery • 507/678-2752

2008 70 Ton Liddell Drop Side Deck Lowboy Tri-Axle Trailer, Tandem Two-Axle Jeep, Two-axle Nitro Stinger with Motor ......................................................................$190,000 Sun Piledriving Equipment 302-539-7187 5-6 BB

Summit Supply LLC 888-888-1248 • sales@summittracks.us

2012 Wacker WL50, 300 Hrs, Cab, A/C, Hyd Cplr, 75” .98 Cy Bkt, 10,660 Lbs, Articulated.................................$60,420 Call Steve Samosky • 262/373-2151 5 JM

2012 Wacker 28Z3, 75 Hrs, OROPS, Coupler, Aux. Hyd, Rubber, 9’ Dig Depth, 5680 Lbs................................$32,710 Call Steve Samosky • 262/373-2151 5 JM

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. Call McLaren 888-492-4230 4-5 DH

2004 Cedarapids 452, Front Wheel Assist Topcon Electric 20’ Screed, 5546 Hrs..........................$87,500 Call 605-336-0411 5-6 PK

4-5 PK

SEE YOUR BARGAIN AD IN

COLOR 2006 Ditch Witch FX60 Vacuum Excavator, 800 gal spoils capacity, 200 gal water tank, 4 cylinder Cummins engine, 3251 hours ..............................................$32,500 5-6 EB Call Tania 614-443-9751 x237

2014 Wacker RD12A Ride On Roller, Honda Engine, Foldable Rops, NEW ............................................$14,500 5 JM Mueller Implement 608-935-2751

2005 Mahindra 6000 Tractor, 60HP, 638 Hrs, 2WD, Single Remote, wheel weights, High/Low, New Clutch ...... ................................................................................$9,999 Mueller Implement 5 JM 608-935-2751

ONLY $50 EXTRA FOR TWO INSERTIONS

Page 80 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $105

2010 Gehl V270 Vertical Lift Skid Loader, Like New, One Owner, 785 Hrs, OROPS, ISO Joystick Controls, 74” 22.8 Cu. Ft. HD Bkt, Custom Radiator Guard, Super Nice Machine! .......................................$29,900 Call George 219-696-8911 5 JM

2007 Case 580SM, s/n N7C428087, 5100 Hours, Cab w/AC, Two Lever, Ride Control, 82” 4-in-1 Bucket, 12”,18” and 24” Buckets................$45,000 Call Mark 630-739-7770 5 JM

1991 John Deere 300D, S/N 775834, Open ROPS ....................................................................$19,000 Call 502/456-4050 Ask for Lynell or Albert 5-6 EB

2013 Takeuchi TS70V, s/n T3V07000217, 300 Hours, Cab w/Heat & AC, Two Speed , 72” Bucket w/Edge, 12X 16.5 Tires ..............................$35,900 Call Steve 630-878-8765 5 JM

2006 Case 580SM, s/n N6C412119, 4600 Hrs, Cab w/Heat & AC, 4WD, Ext-Hoe, Ride Control, Two Lever, 82” Bkt, 12” and 24” Bkt....................$45,000 Call Dennis 630-774-8830 5 JM

1997 Volvo A30C, s/n A30CV2688, 11,070 Hrs, 4 Spray Heads, Hose Reel w/Nozzle, Hyd. Driven Water Pump, Volvo TD103KBE Engine, 289 Adv. Horsepower, 1-2-3-D Speed, in Cab Controls, A/C.. ....................................................................$75,000 Call David 219-696-5680 5 JM

1998 50 Ton Trail King TK100HDG Trailer, Raised Center, New Aptitong Decking, New Paint...$34,900 3-6 AP Call Craig 800-824-6704

2007 Ditch Witch XT1600, 221 Hrs, Tracks at 90%, Excellent Condition ................................$49,500 Call Tim 630-665-5600 5 JM

New Side-Entry JCB Skids. Priced to Move Call Don 316-943-9311

5 JM

1981 Grove Rt 755, 55 Ton S/N # 49225, Cummins Rebuilt, 110’ Main Boom, 32’ Jib, Auxilliary Hoist, 5 Sheave Block, Cleveland Ohio Call Andy 216-316-1511 5-6 EB 1993 Grove Rt 422, 22 Ton S/N # 78334, Cummins 4 Cyl 12,100 Hours, 3 Speed Transmission, 27’-70’ Main Boom, 25’-43’ Jib, Auxilliary Hoist,17.5 X 25 Tires, Ball, New Rotec, Boom Scope Cylinder Rebuilt, Fresh Grove Paint, Cleveland Ohio Call Andy 216-316-1511 5-6 EB

Deere 320D, 805 Hrs, Hand Controls, Std. Hyd, Cab, Air, Radio.........................................................................$30,000 Call Don 316-943-9311 5 JM

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $105 per ad, $50 additional for color. • Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at 800/523-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 81

BusinessCalendar

To view our Business Calendar online, go to www.constructionequipmentguide.com.

Ohio Asphalt Expo – Flexible Pavements of Ohio Dates: Tuesday, March 3, 2015 to Wednesday, March 4, 2015 Place: Columbus/Polaris Hilton Hotel 8700 Lyra Drive, Columbus, OH 43240 The Asphalt Expo is Ohio’s premiere asphalt pavement event with multiple concurrent educational sessions and an indoor and outdoor trade show and exhibition. If you construct, inspect, manage or maintain local or private transportation infrastructure the Ohio Asphalt Expo has the information you need to ensure a successful, long-lasting asphalt pavement. For more information on this event, please go to the event link: http://www.ohioasphaltexpo.org. Minnesota’s Transportation Conference When: March 3, 2015: Reception March 4-5, 2015: Conference Where: DoubleTree by Hilton Bloomington, Minnesota Contact: Denise Woods dwoods@agcmn.org Phone: 651/796-2186 NTEA SHOW 2015 – The Association for the Work Truck Industry One Industry – One Association – One Resource Indiana Convention Center Indianapolis, IN Dates: Monday, March 2, 2015 to Friday, March 6, 2015 Attendees gain critical industry information with three full days of intensive education, including Special Sessions, and have access to exciting events designed to grow your knowledge and build industry relationships. For more information on this show, please contact NTEA at 800/4416832. MNLA: Minnesota Nursery Landscape Association Webinar: Social Media Marketing Basics Date: March 3, 2015 Cost: $13.00 Contact: mnla@mnla.biz PHONE: 651/633-4987 Join 2015 Northern Green Expo Speaker, Oscar Stuttgen, GlueBug, LLC., as he continues the discussion on the topic of social media. In this live webinar, you will learn Facebook & Twitter tips and tricks to help your business grow online. MNLA: Minnesota Nursery Landscape Association Green Industry Day on the Hill March 4, 2015 @ 7:30 AM Kelly Inn/State Capitol, St. Paul, MN 161 Saint Anthony Avenue St. Paul, MN 55103 Contact: Tim Power; tim@mnla.biz; phone: 651/633-4987 All Minnesota Green Industry Professionals are invited to attend this event. In order for MNLA to coordinate appointments with legislators, please register no later than February 20. Join us in St. Paul for a friendly face-toface conversation with someone who can make a real impact in your business. MNLA will coordinate appointments and make sure you are prepared to speak intelligently about the issues. We will partner new attendees with experienced green industry professionals. Breakfast and lunch will be served to participants. Minnesota Erosion Control Association Conference Dates: Wed., March 11, 2015 to Thurs., March 12, 2015 Place: Duluth Entertainment Convention Center, Duluth, MN There are many interesting and exciting Storm Water Topics at this Conference. The Pre-Conference Workshops on March 10th include: . Construction Installer Certification . MS4 Workshop . Industrial Storm Water Regulations, SWPPPs, Sampling and Monitoring . Turf Establishment . MIDS Calculator Training On March 11th and 12th, there will be sessions on the Duluth Stream Restoration, Erosion Control Implementation Plan, Pre-Treatment Practices and Sizing, Designing and Implementing Temporary Erosion Control BMP’s, Wisconsin Storm Water and MORE! For more information on this conference, please visit the MECA website: http://mnerosion.org/. OHIO OIL & GAS ASSOCIATION (OOGA) WINTER MEETING MARCH 11-13, 2015 at the HILTON COLUMBUS AT EASTON, COLUMBUS, OHIO For the 68th year, OOGA brings together the top industry leaders from Ohio and the nation to provide the most current state of the oil and gas industry in business sessions and the trade show. The Winter Meeting is the principle business meeting of the Association, the premier networking event of the year. This annual gathering includes: . Business Sessions . Trade Show . Updates on State and Federal Activities . Presidents Reception Please go to http://oogawintermeeting.com/schedule/ for more information. MNLA: Minnesota Nursery Landscape Association 53rd Annual MN Shade Tree Course March 17 – 18, 2015 Bethel University Arden Hills, MN Contact: Phone: 612/625-2900 WORLD OF ASPHALT 2015 SHOW & CONFERENCE The Base of Innovation DATES: March 17-19, 2015 PLACE: Baltimore, MD, USA World of Asphalt, and the co-located AGGI Aggregates Academy & Expo, featured the following for the 2015 show in Baltimore, Maryland: . The exhibit show floor will feature leading manufacturers and service providers, showcasing their newest products and technologies aimed at the aggregates, asphalt, pavement maintenance and traffic safety industry sectors. . Attendance from all facets of the asphalt and aggregates industries, including: . Pavement Maintenance Contractors . Asphalt and Aggregate Producers . Fleet Managers . Highway Contractors . Traffic Safety Professionals

. Plant Operators . Public Officials . Expert-led education sessions for the shows’ signature learning programs: . AGGI Academy . National Asphalt Pavement Association’s Environment, Health & Safety Conference . People, Plants and Paving Training Program Co-Located Events & Meetings AGGI Aggregates Academy & Expo focuses exclusively on the aggregate industry and is the industry’s leading exposition and education resource. AGGI features in-depth, industry focused, educational programming. For more information on this event, contact Asphalt Emulsion Manufacturer’s Association. Organizer: 410/267-0023, Annapolis, MD, USA. AGC CONVENTION 96th Annual AGC Convention DATE: March 18-20, 2015 PLACE: San Juan, Puerto Rico Join us for the Convention!!! Business Suit Optional No one knows the future, but gaining a comprehensive view of where you are, where you are going and where you need to be can only strengthen the educated decisions construction professionals have to make every day. Take the opportunity to step outside, analyze the direction your organization is heading, listen and compare that with other construction professionals and take that perspective back to your organization. As our premier event each year, the AGC Convention and Technology & Construction Solutions Expo is the ideal opportunity to see everything AGC can do for you and your business. This year’s convention will include professional development sessions covering: . Workforce Development . Drones in Construction . Leadership . Risk Management . Quality Control . Marketing . Much More! For more information, please contact The Associated General Contractors of America. General Inquiries: 703/548-3118 AGC Store Inquiries: 800/242-1767 Convention.AGC.org National Demolition Association Convention Dates: March 21 – 24, 2015 Place: Gaylord Opryland Resort & Convention Center Nashville, TN Demolition is a competitive, high-stakes business. Success requires results: heightened asset performance; increased ROI; profitability and efficiency at every level. Achieving those results takes innovation, knowhow and new information to stay ahead of the curve. Demolition professionals who are serious about their success attend the industry’s most important event of the year to give themselves the advantage. You can, too. Make every effort to attend. For more information on Exhibiting or Sponsoring at this year’s convention, contact: Andrew Haigh at ahaigh@demolitionassociation.com or telephone: 312/673-5442. West Virginia Construction & Design EXPO 2015 / Precision Laser & Instrument, Inc. Dates: March 25, 2015 at 10:00 AM to March 26, 2015 at 12:00 PM Location: Charleston Civic Center, 200 Civic Center Drive, Charleston, WV 25301 Event Contacts: WV EXPO Phone: 304/342-EXPO Email: expo@wvexpo.com EXPO has become a meeting ground for numerous trade associations and professional societies. A number of impressive speakers and seminars are also offered at EXPO to round out a complete educational experience. The sponsors have found that these seminars and meetings help attract qualified attendees to the show! A number of our seminars offer continuing education credit. Education and Opportunity are found in our annual lineup of seminars and meetings. Over 400 exhibit booths represent an unparalleled learning opportunity for attendees. EXPO 2011 attracted over 5,000 people from across the USA to see new products, talk to knowledgeable exhibitors and attend valuable seminars – most offer continuing education credit. If the 35th Annual West Virginia Construction & Design Exposition is important to your business, act now and make the appropriate connections. 3GS & Associates to Host Contractor Marketing Seminar in New Jersey Bergen County, NJ – 3GS & Associates will host a public education and outreach seminar for contractor industry professionals and others in Moonachie, NJ on March 25, 2015. 3GS & Associates, which specializes in marketing and consulting, will discuss marketing ideas and tactics to gain quality clients. The 3GS event will be held on Wednesday, March 25, 2015 from 5:00 PM to 8:30 PM EST at The Greycliff, 122 Moonachie Avenue, Moonachie, NJ 07074. The seminar will focus on more than 50 ways to creatively and effectively market your business. The seminar will be hosted by Matthew Garabedian, who has built several businesses from bottom to top using his marketing expertise and has grown them into multi-million dollar enterprises within a few years. The seminar will include a gourmet buffet dinner, a mix of seminar lectures and networking. Pre-registration is required. Please register at http://3gsassociates.com/seminar.html. AEM MEDIA SERVICES presents BAUMA CONEXPO AFRICA BAUMA CONEXPO AFRICA will be held September 15 to 18, 2015 at the Johannesburg Expo Centre in Johannesburg, South Africa. The show is owned and organized by the Association of Equipment Manufacturers (AEM) and Messe Munchen International (MMI). Exhibit space sales are now open for Bauma ConExpo Africa 2015. Companies applying for space by February 12, 2015, will be included in the first round of booth assignments. After that date, applications will be accepted on a first come, first served basis. World-class exhibition in important marketplace Exhibitors at the last show pointed out the high quality of attendees. The 2015 show venue is the country’s largest purpose-built exhibition and events facility, offering a modern space and services. And, show participants benefit from the global experience and customer service of AEM, organizer of CONEXPO-CON/AGG, and MMI, organizer of BAUMA. BAUMA CONEXPO AFRICA has broad-based support from leading industry groups in Africa and worldwide. After 2015, the show goes to a three-year cycle in response to local and international industry input. AEM is show exhibitor contact for the Americas: visit the show website: www.bcafrica.com for more details. Contact AEM at sales@aem.org or by telephone +1-414-298-4150/ toll free U.S. and Canada 800-8676060.

CLASSIFIEDS Classified Rates:30 Words or Less for $35.00. Each Additional Word is $1.16. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 CRANES

LOADERS

Skid Steer Loaders

Boom Cranes

Backhoe Loaders

2007 National 1311OH, 50 Ton Mercedes, 450 HP, Good condition ........................$175,000

2013 Caterpillar 420F, 172 hours 4X4, ride control, autoshift, control pattern switch, hydraulic thumb, aux. hydraulics, hydraulic QC, extendable stick, 4-in-1 bucket, cold weather package, WARRANTY.

2004 CASE 70XT, Cab w/ Heat, QC, Aux. Hyd., Good condition, 2,300 hrs ..$17,500.

Aspen Equipment Co. 612-719-2009

EXCAVATORS Hydraulic Excavators

913-915-1607

Wheel Loaders CAT IT38 Wheel Loader, S/N 7BS00524. Good condition, 18,286 hours ................CALL.

Contact: Mike 507-380-3210

Gibson Machinery, LLC 440-439-4000

2006 Doosan S255 and Genesis GXP400R Package, Rotating Mobile Shear, Good condition, 12,820 hrs $174,000.

2008 Yanmar CBL40, PTO, 3 pt. hitch, backhoe, great condition, 216 hours ..............CALL.

RECYCLING EQUIPMENT

Gibson Machinery, LLC 440-439-4000

Vermeer Sales & Service 641-628-2000

1999 Kobelco SK115DZ, Cab w/ heat, Fair condition, 6,150 hours ..........................$29,500. 913-915-1607 2005 Caterpillar 315CL, Hydraulic Quick Coupler, Good condition, 7,200 hrs ..$70,000.

JCB 214S Backhoe loader, 4WD/4WS, Cab w/ AC, Aux. Hydraulics, 100 HP Turbo, Power shift Trans, 1.4 CU Yd. GP Bucket, 24'' backhoe, Good condition, Pics available 2,200 hours ..........................$33,500.

Crushing 2011 Screen Machine JXT Jaw, Portable Track Jaw 26x45 Crusher, Good condition, 1300 hours ........................$350,000. Ohio CAT 614-949-9296

908-625-0697

Gibson Machinery, LLC 440-439-4000

Plan Ahead! We’re already hard at work on stories for the year, and would love to feature your company! Please contact us:

470 Maryland Drive Fort Washington, PA 19034

editorial@cegltd.com

Page 82 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WE NEED RUNNING OR NON-RUNNING CAT WHEEL LOADERS 930, 950, 950B, 950E, 966D/E & 966F/F-II. CONTACT: NAQIB KHAN PHONE: +92-333-3298751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– SCRAP OF CRC PIPE | WE WANT TO PURCHASE SHEET CUTTING SCRAP AND CRC PIPE CONTACT: BHOLENATH ENTERPRISES PHONE: 09803450903 EMAIL: SANJAYSONI197545@ GMAIL.COM –––––––––––––––––––––––––––––––– MECHANICAL THUMB FOR OLDER JD 310 D BACKHOE MUST BE IN EXCELLENT SHAPE NO JUNK CONTACT: JIM PHONE: 515-205-4366 EMAIL: JMTOMLONOVIC@MAIL.COM –––––––––––––––––––––––––––––––– USED CATERPILLER WHEEL LOADERS | WE ARE ALWAYS LOOKING TO BUY CAT WHEEL LOADERS FOR PERSONAL STOCK.IN URGENT BASIS WE NEED TO BUY CAT 950B/E, 966E/F/D, CAT MOTOR GRADERS 140G, 12G, 14G AND CAT DOZERS D8R/N, D9N/R. IKRAM ULLAH KHAN & COMPANY CONTACT: MOHSIN KHAN PHONE: +923132002763 EMAIL:ROYALMACHINERYTRADERS@ GMAIL.COM –––––––––––––––––––––––––––––––– CAT ENGINES 3304/6 3116 | ANY CONDITION USED ENGINES FOR PARTS CATERPILLAR ENGINES 3304-3306 3116 VIBER ENGINES AND PARTS AND ANY CONTACTS OF CAT BREAKERS IN MIAMI OR FLORIDA WILL APPRICATE CONTACT NUMBERS . CONTACT: KHAN PHONE: 786-227-8836 EMAIL: YRSUPPLIER@GMAIL.COM –––––––––––––––––––––––––––––––– CABLE SKIDDER | J.D.540G LOW HRS, NO JUNK AND OR RANGER F65 ORF66 LOW HRS CONTACT: CHUCK GIBSON PHONE: 207-399-4736 EMAIL: CHUCKGIBSON50@GMAIL.COM –––––––––––––––––––––––––––––––– BOBCAT WITH BUCKET OR BRUSH FOR SNOW REMOVAL, AND FORKLIFT ATTACHMENT. CONTACT: IRV HADDOX PHONE: 667-203-1536 EMAIL: IRVINHADDOX3RD@GMAIL.COM –––––––––––––––––––––––––––––––– LOAD CHARTS FOR SCOTT MIDLAND T22 BOOM TRUCK | I HAVE BEEN SEARCHING FOR MONTHS FOR AN OPERATORS MANUAL WITH LOAD CHARTS AND CAPACITIES FOR A SCOTT T22 BOOM TRUCK CRANE CONTACT: DENNIS SCANNELL PHONE: 978-726-6572 FAX: 978-459-6296 EMAIL: DENNIS.SCANNELL90@ GMAIL.COM ––––––––––––––––––––––––––––––––

322CL CAT EXCAVATOR BUCKET | LOOKING FOR BUCKETS TO FIT OUR 322CL CAT EXCAVATOR . HAS 80MM PINS COUPLER IS 12" WIDE. LOOKING FOR HIGH CAPISITY BUCKETS. MOSTLY A 54" OR 60" AT LEAST 2.5YD3 TO 3YD3. LOOKING FOR OTHER SIZES LET ME KNOW WHAT YOU HAVE CONTACT: KEN PHONE: 330-219-1003 FAX: 330-856-3935 EMAIL: KRV8815@MSN.COM –––––––––––––––––––––––––––––––– PRENTICE LOG LOADER 2410 OR SIMILAR. DELIMBER NOT NEEDED CONTACT: MIKE COOK PHONE: 580-256-5335 FAX: 580-256-1644 EMAIL: MIKE.COOK@ATT.NET –––––––––––––––––––––––––––––––– NEEDED BULLDOZER D8R WITH RIPPER 1998 AT 2003 I NEEDED 3 BULLDOZERS D8R , ENC CAB , WITH RIPPER UNDER 12300 HOURS UNDERCARRIAGE 75 GOOD, NO JUNK , NO SCAM, NO ADVERTISE USER UNDER PLEASE GOOD DEAL OR I PASS CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA –––––––––––––––––––––––––––––––– KOMATSU EXCAVATORS PC300-7/8, KOMATSU PC350-8 YEAR 2010 UP LESS THAN 9000 HOURS CONTACT: WADIE IBRAHIM PHONE: +962795523295 EMAIL: WZIBRAHIM@NEEC.COM.JO –––––––––––––––––––––––––––––––– PLEASE SEND UNADVERTISED WHOLE SALE PRICED MACHINES. CAT 963 C EROPS COUPLER IS A PLUS-- UNDER 10K HOURS CAT 953 D EROPS UNDER 3500 HRS RIPPER OR VALVE IS A PLUS CAT 953 C EROPS- CAT 953 B EROPS CAT 815 LATE B OR F EROPS - TILT BLADE 2X CAT 627 E EROPS READY TO WORK CONTACT: SANTIAGO SCARZELLA PHONE: 305-560-4263 EMAIL: SSCARZELLA@GMAIL.COM –––––––––––––––––––––––––––––––– WE ARE IN THE MARKET FOR A LATE MODEL TEREX BIDWELL 3600 WITH ALL ATTACHMENTS AND A COUPLE WORKING BRIDGES. PLEASE EMAIL ME WITH AVALIBILTY AND PRICE. CONTACT: BRIAN WALKER EMAIL: BWALKER@MANAFORT.COM –––––––––––––––––––––––––––––––– 2ND HAND JIB | USED JIB FOR LIEBHERR LTM 1060, GROVE RT 760/745&740, AT750BE, 880 & 9120 CONTACT: ANTONIO PILLO PHONE: +966 53 770 3151 EMAIL:ANTONIO.PILLO@ ALMOJILGROUP.COM –––––––––––––––––––––––––––––––– USTC 11026 BLOCK UNLOADER | USE ON THE GROUND CONTACT: RAFAEL EMAIL: RMARTINEZ@ATCCRANE.COM ––––––––––––––––––––––––––––––––

WE ARE HAZRAT SULEMAN DISTRIBUTION AND MARKETING COMPANY FROM UNITED ARAB EMIRATES, TRYING TO FIND A USED TRACTOR TO BUY AND YOURS IS FOUND FOR SALE BY OUR COMPANY.HOW MUCH DO YOU SELL, ADDRESS. PARK PLACE TOWER, MALL 1403 SHEIKH ZAYED ROAD, DUBAI, UNITED ARAB EMIRATES CONTACT: HAZRAT SULEMAN PHONE: 00971528530952 EMAIL:HAZRATSULEMAN22@ GMAIL.COM –––––––––––––––––––––––––––––––– 440 540 SERIES CABLE SKIDDER $12,000 TO $25, 000. LOOKS NOT AS IMPORTANT AS CONDITION. WANT SOMETHING READY TO WORK IMMEDIATLY. PHONE: 417-840-1046 EMAIL:COUNTRYBOYWG@YAHOO.COM –––––––––––––––––––––––––––––––– COMPLETE FRONT AXLE FOR DOOSAN DL400 FRONT END LOADER CONTACT: BILL CRITSER PHONE: 219-712-6579 FAX: 219-663-2819 EMAIL:BILLSR@GARYMATERIAL.COM –––––––––––––––––––––––––––––––– USED CATERPILAR SKIDDER 528B & 530B WITH LUFKIN WINCH, YEAR 1990 TO 1995 . CONTACT: ABDULKADER KHATIB PHONE: 00905079651728 EMAIL: AB.KH.INTER@GMAIL.COM –––––––––––––––––––––––––––––––– WE BUY EQUIPMENT MANUALS | WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS, BUT NOT INCLUDED TRUCKS AND VEHICLES. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. CONTACT: GRACE FRANCES PHONE: 270-849-2270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– JOHN DEERE 120 EXCAVATOR | 20002005 JOHN DEERE 120 WITH GRAPPLE BUCKET. CONTACT: JAMES GRANER PHONE: 301-855-3078 FAX: 301-855-0635 EMAIL: JWGRANERJR@ JWGRANER.COM –––––––––––––––––––––––––––––––– WE NEED RUNNING OR NON-RUNNING CAT WHEEL LOADERS 910, 920, 930, 936 & 936E. 950, 950B, 950E, 950F/F-II, 966C/E & 966F/F-II. 970F, 980C, 980F, 988B & 972G. CONTACT: RIZ PHONE: 832-528-0786 EMAIL: RIZ@MEGAEQUIPMENTS.COM ––––––––––––––––––––––––––––––––

@ 832-528-0786 OR EMAIL RIZ@MEGAEQUIPMENTS.COM WE NEED RUNNING OR NON-RUNNING CAT WHEEL LOADERS 970F, 980C, 980F, 988B & 972G. CONTACT: RIZ PHONE: 832-528-0786 EMAIL: RIZ@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– VARIOUS | CAT 345BL SERIES II - 2003 YEAR AND NEWER CAT 988G - 2000 YEAR AND NEWER CAT 623E / F - 1993 AND NEWER CAT 613C II - 2003 AND NEWER WITH CAB & A/C CAT 14G - 1988 AND NEWER CAT D9H JCB 214 LOADER BACKHOE - 4 X 4 - 2003 - 2005 THANKS CONTACT: SANTIAGO PHONE: 305-506-4263 EMAIL: SSCARZELLA@GMAIL.COM –––––––––––––––––––––––––––––––– ROCKWELL R170 DIFFERENTIAL | CAT 973C TRACK LOADER GP BUCKET LOOKING FOR ROCKWELL SINGLE | 3.75 CUBIC YARD G.P. BUCKET WITH SPPED REAR DIFFERENTIAL 680 - 740 TEETH AND SEGMENTS RATIOS 24 SPLINE AXLES, CASTING CONTACT: FRANK @ TRICO NUMBERS #3200 J 1180 AC FOR OFF PHONE: 800-TRICO-50 ROAD USED IN MED. TRUCKS & EQUIPFAX: 732-674-2095 MENT CORE OR TAKE OUT EMAIL: FHORAN@ CONTACT: DONNY TRICOEQUIPMENT.COM PHONE: 800-464-0573 –––––––––––––––––––––––––––––––– FAX: 978-463-3292 TOWABLE LIFT | GENIE TZ34 OR COMEMAIL:WESTSIDETRUCKEQUIPMENT@C PARABLE OMCAST.NET CONTACT: JACK | EMAIL: –––––––––––––––––––––––––––––––– KFATICA@AOL.COM TEREX 528 OR 644 TELEHANDLER. 15–––––––––––––––––––––––––––––––– 20K PRICE RANGE, LOW HOURS, 85X20FTENCLOSED CARTRAILER | DELIVERY TO 54235, NEED ASAP. 8.5X20FT.V ENCLOSED CAR TRAILER CONTACT: RICK WITH ELECTRIC INSIDE. PHONE: 920-493-1470 CONTACT: MR.TUSSING EMAIL: BORK5@YAHOO.COM PHONE: 970 523-9176 –––––––––––––––––––––––––––––––– EMAIL: TUSSINGDAVID@YAHOO.COM CAT 315CL EXCAVATOR | LOOKING TO –––––––––––––––––––––––––––––––– PURCHASE CAT 315CL EXCAVATOR / 3306 CAT GEN SET | USED 3306 CAT 2000 HOURS OR LESS / MUST BE GEN SET 175 - 200 LOCATED IN SOUTHEASTERN UNITED CONTACT: SCOTT DARLING STATES. THANKS. PHONE: 402-385-3003 CONTACT: BOB FAX: 402-385 2154 PHONE: 919-896-4782 EMAIL: SCOTTEMAIL: NCNETWORKBOB@GMAIL.COM DARLING@HOTMAIL.COM –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– LINCOLN CLASSIC 300 G 550 NEW TRUCK ENGINE CONTACT: CHAVA SALAZAR CONTACT: TOMMY PHONE: 9092293880 PHONE: 208-867-8422 FAX: 9094953216 EMAIL: HAMMERDOWNEXPRESS@YAHOO.COM EMAIL:SALAZARCHAVA@YAHOO.COM –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– MAC WALKING FLOOR | 2013 NEW OR 6036 SKYTRACK | USED 6036 OR 6032 NEWER SKYTRACK CONTACT: AHANNAHDEMO@AOL.COM CONTACT: MARIO PHONE: 716 8564547 PHONE: 231-768-4001 FAX: 7168560211 EMAIL: EMAIL:AHANNAHDEMO@AOL.COM MARIODIMAMBRO@HOTMAIL.COM –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– CAT WHEEL LOADERS | WE NEED RUN- 8-10,000LB TELESCOPIC FORKLIFT, GOOD CONDITION, LOW HOURS. NING OR NON-RUNNING CAT WHEEL NORTHEAST OR MIDWEST DELIVERY. LOADERS 910, 920, 930, 936 & 936E. CONTACT: TAD DE POLO CALL RIZ @ 832-528-0786 OR EMAIL PHONE: 813-675-2089 RIZ@MEGAEQUIPMENTS.COM WE NEED RUNNING OR NON-RUNNING CAT FAX: 813-621-2179 WHEEL LOADERS 950, 950B, 950E, EMAIL:TDEPOLO@ESSEXCRANE.COM 950F/F-II, 966C/E & 966F/F-II. CALL RIZ ––––––––––––––––––––––––––––––––

CASE 450 | LOOKING FOR GOOD FRONT BUCKET FOR 450 CASE CRAWLER PART NO. D49578 GP BUCKET CONTACT: ROGER PHONE: 570-639-3058 EMAIL: ROGERPF1@FRONTIERNET.NET –––––––––––––––––––––––––––––––– CAT 973C GP BUCKET | 3.75 CUBIC YARD GENERAL PURPOSE BUCKET WITH TEETH AND SEGMENTS CONTACT: FRANK @ TRICO PHONE: 800-TRICO 50 FAX: 732-674-2095 EMAIL:FHORAN@ TRICOEQUIPMENT.COM –––––––––––––––––––––––––––––––– LOOKING FOR FORKLIFT BRAND JCB UK , BOOM LENGTH 17 MTR AND MAXIMUM LIFTING CAPACITY 4000 KG PHONE: 0093799453760 EMAIL: ATALAFGHAN_CO@YAHOO.COM –––––––––––––––––––––––––––––––– SAMSUNG EXCAVATORS | MODEL NEEDED SE280 YEARS 1995-1999 CONTACT: MONA PHONE: 919-259-2577 EMAIL: TAMERDAK@YAHOO.COM –––––––––––––––––––––––––––––––– SAWHEAD VALMET 503 CONTACT: BOB BRINK PHONE: 6205835226 EMAIL: KANWAKA@POWWWER.NET –––––––––––––––––––––––––––––––– LOADER TIRES 205 R X 25 | NEWER TIRE NEEDED CONTACT: RICH PHONE: 302-420-0528 EMAIL: RICHPAVING@AOL.COM –––––––––––––––––––––––––––––––– GOOSE NECK TRAYLER FOR CATTLE | CONTACT: ENRIQUE BARREDA PHONE: 2106982275 EMAIL:ENRIQUEBARREDA@GBARREDA.COM –––––––––––––––––––––––––––––––– WE BUY EQUIPMENT MANUALS | WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS, BUT NOT INCLUDED TRUCKS AND VEHICLES. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL US. CONTACT: GRACE FRANCES PHONE: 270-849-2270 EMAIL: TRITOWN1@MSN.COM ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 83 ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Newark, NY Sat., February 28, 2015 For: Estate Auction – Full line of Aggregate Equipment

• Denver, CO March 19, 2015 • North East, MD March 19, 2015 • Chicago, IL March 20, 2015

• Dallas, TX Tues., March 3, 2015 For: Late & Great Rental Fleet Construction Equipment & more

• Minneapolis, MN March 24, 2015

• Las Vegas, NV Fri., March 6, 2015 For: Large Rental Return Auction

• Casper, WY March 25, 2015

• Queretaro, Mexico Fri., March 6, 2015 For: Large Quantity Late Model Cat Construction Equipment

• Atlanta, GA March 26, 2015

• Houston, TX Tues., March 10, 2015 For: Oil Field Equipment Auction – One Owner

• St. Louis, MO March 27, 2015

• Albany, NY Fri., March 20, 2015 For: Estate Auction – Construction Equipment & more • Ft. Worth, TX Tues., March 24, 2015 For: Truck Auction • Odessa, TX Wed., March 25, 2015 For: Late Model Construction Equipment & more • Portland, OR Wed., March 25, 2015 For: Late Model Construction Equipment, Aerial Equipment, Trucks & more • Atlantic City, NJ March 26 - 28, 2015 For: Construction Equipment & more • Dansville, NY Sat., April 11, 2015 For: Municipal & Rental Return Auction • Kenosha, WI Fri., April 17, 2015 For: Complete Liquidation – Retirement Auction • Racine, WI Sat., April 18, 2015 For: Rental Return Auction – Telescopics, Boom Lifts & more • Aquascalientes, Mexico Fri., April 24, 2015 For: Late Model Construction Equipment, Forklifts, Aerial Lifts, Trucks & Trailers

• Raleigh-Durham, NC March 24, 2015

• Chehalis, WA March 27, 2015

• Darlington, SC March 31, 2015 • Pasco, WA March 31, 2015 • Indianapolis, IN April 7, 2015 • Grande Prairie AB, CAN April 9-10, 2015 • Albuquerque, NM April 14, 2015 • Manchester, NH April 16, 2015 • Lincoln, NE April 30, 2015 • Prince George BC, CAN May 6, 2015 • Lethbridge AB, CAN May 7, 2015 • Detroit, MI May 14, 2015 • Williston, ND May 20, 2015 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Sacramento, CA Sat., March 14, 2015 For: Heavy Equipment & Commercial Truck Sales • Riverside, CA Sat., March 21, 2015 For: Heavy Equipment & Commercial Truck Sales

• Manchester, NH May 16-17, 2015 For: Complete Liquidation of The D.W. Ford Collection

• Portland, OR Wed., March 25, 2015 For: Heavy Equipment & Commercial Truck Sales

• Clinton County, NY Sat., June 6, 2015 For: Large Cat Construction & Aggregate Equipment & more

• Sacramento, CA Sat., April 11, 2015 For: Heavy Equipment & Commercial Truck Sales

RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • St. Aubin Sur Gaillon, FRA March 3, 2015 • Fort Worth, TX March 4-5, 2015 • Los Angeles, CA March 6, 2015 • Dubai, UAE March 10-11, 2015 • Sacramento, CA March 11, 2015 • Medicine Hat, AB March 12, 2015 • Columbus, OH March 12, 2015 • Nashville, TN March 17, 2015 • Salt Lake City, UT March 17, 2015 • Kansas City, MO March 18, 2015 • Montreal, QC March 18-19, 2015

BIG IRON www.bigiron.com 800-937-3558 • ONLINE ONLY March 4, 2015 • ONLINE ONLY March 11, 2015 • ONLINE ONLY March 18, 2015 • ONLINE ONLY March 25, 2015 CAT AUCTION SERVICES www.catauctions.com 866-750-9432 • Des Moines, IA Wed., March 25, 2015 For: Joint Auction - Heavy Equipment • Denver, CO Thurs., April 23, 2015 For: Joint Auction - Heavy Equipment • ONLINE ONLY Thurs., March 26, 2015 For: Complete Dispersal Southwest Contracting LLC

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com CHUCK YARBRO AUCTIONEERS, LLC www.yarbro.com 509-765-6869 • Moses Lake, WA Fri., March 20, 2015 For: Spring Hiawatha Valley Equipment Auction

March 12, 2015 For: Construction Equipment • ONLINE ONLY March 19, 2015 For: Construction Equipment • Des Moines, IA Wed., March 25, 2015 For: Joint Auction - Heavy Equipment

COCHRAN AUCTIONS www.cochranauctions.com 301-739-0538

• ONLINE ONLY March 26-27, 2015 For: Construction Equipment

• Crofton, MD Wed., March 18, 2015 For: Complete Dispersal of Cunningham Sand & Gravel

• Denver, CO Thurs., April 23, 2015 For: Joint Auction - Heavy Equipment

DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087

J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085

• Prospect, CT Sat., March 28, 2015 For: Construction Equipment

• Montgomery, AL March 10-12, 2015 For: Trucks, Construction & Forestry 3 Day Public Auction

• Prospect, CT Sat., June 6, 2015 For: Construction Equipment • Prospect, CT Sat., September 26, 2015 For: Construction Equipment

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008

• Prospect, CT Sat., December 12, 2015 For: Construction Equipment

• Kenmore, WA Sat., April 4, 2015 For: Heavy Equipment & Contractors Auction

DEANCO AUCTIONS www.deancoauction.com 601-656-9768

• Kenmore, WA Sat., May 30, 2015 For: Heavy Equipment & Contractors Auction

• Philadelphia, MS March 25-27, 2015 For: 14th Annual Construction Equipment & Trucks Public Auction DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277 • Indianapolis, IN Fri., March 6, 2015 For: One Owner Absolute Auction EURO AUCTIONS USA www.euroauctions.com 770-683-3883 • Atlanta, GA Tues., March 3, 2015 For: 100% Absolute Auction HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Robbinsville, NJ Wed., March 11, 2015 For: Absolute Auction Complete Liquidation – Advance Electric Co., Inc. I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Foley, MN Fri., March 13, 2015 For: Heavy Equipment IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view complete auction schedules, inspection reports & place your bid! • ONLINE ONLY March 5, 2015 For: Construction Equipment • ONLINE ONLY

• Kenmore, WA Sat., July 25, 2015 For: Heavy Equipment & Contractors Auction • Kenmore, WA Sat., October 3, 2015 For: Heavy Equipment & Contractors Auction • Kenmore, WA Sat., December 5, 2015 For: Heavy Equipment & Contractors Auction J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • Lansing, MI Sat., March 14, 2015 For: Heavy Equipment • South Beloit, IL Sat., March 21, 2015 For: Heavy Equipment • West Palm Beach, FL Sat., March 28, 2015 For: Heavy Equipment • Worcester, MA Sat., March 28, 2015 For: Heavy Equipment

MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888

ROGERS REALTY & AUCTION COMPANY www.rogersauctiongroup.com 800-442-7906

• Chilhowie, VA Tues., March 24, 2015 For: Construction Equipment, Trucks, Trailers & Related items

• Mount Airy, NC Sat., March 7, 2015 For: Construction, Agriculture & Transport Equipment

• Marion, NC Wed., April 8, 2015 For: Construction Equipment, Trucks, Trailers & Related items

• Charlotte, NC Sat., April 18, 2015 For: Charlotte/Mecklenburg Rolling Stock Auction

• Pelzer, SC Tues., April 14, 2015 For: Construction & Farm Equipment, Trucks, Trailers, Attachments & Related items

• Mount Airy, NC Sat., June 20, 2015 For: Construction, Agriculture & Transport Equipment

MOTLEY’S AUCTION GROUP www.motleys.com 804-232-3300

• Charlotte, NC Sat., September 19, 2015 For: Charlotte/Mecklenburg Rolling Stock Auction

• Richmond, VA Tues., March 10, 2015 For: Construction Equipment & Trucks

ROLLER AUCTIONEERS www.rollerauction.com 866-515-1668

• ONLINE ONLY Wed., March 11, 2015 For: Support Tools & Equipment.

• Denver, CO Wed., March 11, 2015 For: Heavy Construction & Contracting Equipment

NITKE AUCTIONS www.nitkeauctions.com 715-693-4447

• Denver, CO Wed., May 13, 2015 For: Heavy Construction & Contracting Equipment

• Wausau, WI April 24 - 25, 2015 For: 50th Annual Auction – Wisconsin Contractors NORTH COUNTRY AUCTIONS www.northcountry-auctions.com 603-539-5322 • W. Boylston, MA Sat., March 14, 2015 For: Estate Auction – Sand & Gravel Contractor NUTT AUCTION COMPANY www.nuttauction.com 903-748-4400 • Texarkana, AR Sat., February 28, 2015 For: Red River Hydro Seeding Retirement Auction PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com 860-642-4200 • North Franklin, CT April 10-11, 2015 For: Major Public Equipment Auction PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Thurs., March 12, 2015 For: Construction Equipment • ONLINE ONLY Tues., March 17, 2015 For: Truck & Trailer Auction • ONLINE ONLY Thurs., March 26, 2015 For: Construction Equipment

• Denver, CO Wed., July 15, 2015 For: Heavy Construction & Contracting Equipment • Denver, CO Wed., September 16, 2015 For: Heavy Construction & Contracting Equipment • Denver, CO Wed., November 11, 2015 For: Heavy Construction & Contracting Equipment SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • Windsor Locks, CT Sat., May 5, 2015 For: 6th Annual Spring Public Equipment Auction STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • Mankato, MN Feb. 20 – March 3, 2015 For: Kibble Equipment – Timed Online Auction • West Fargo, ND Wed., March 11, 2015 For: Aglron Event • Mt. Pleasant, IA Fri., March 20, 2015 For: Spring Aglron Event WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat., March 14, 2015 For: Heavy Equipment

• Atlanta, GA Thurs., April 16, 2015 For: Heavy Equipment

QUARRICK EQUIPMENT & AUCTIONS INC. www.quarrickauction.com 724-439-1621

• Philadelphia, PA Sat., April 18, 2015 For: Heavy Equipment

• Uniontown, PA Thurs., April 2, 2015 For: Construction & Farm Equipment

• Princeton, MN Sat., September 12, 2015 For: Heavy Equipment

• Kansas City, MO Thurs., April 23, 2015 For: Heavy Equipment

• Uniontown, PA Thurs., June 4, 2015 For: Construction & Farm Equipment

• Princeton, MN Sat., December 5, 2015 For: Heavy Equipment

JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200

RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395

WILSON’S AUCTION SALES www.wilsonsauction.com 302-422-3454

• Brooklyn, MS February 26-28, 2015 For: Days 2, 3, 4 Early Spring Public Auction

• Lebanon, TN Sat., March 21 2015 For: Heavy Equipment, Trailers, Trucks & Commercial Vehicles

• Harrington, DE Sat., March 21, 2015 For: Mid-Atlantic Spring Equipment Auction @ Delaware State Fairgrounds

• Princeton, MN Sat., June 6, 2015 For: Heavy Equipment

Page 84 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bidders Take Advantage of Bargains on Backhoes, Dozers,

oder & Frey held its 41st annual Florida Auctions sale Feb. 9 to 16 in Kissimmee, Fla. The seven-day auction featured a huge assortment of backhoes, wheel loaders, excavators, dozers, dump trucks, motorgraders, paving equipment, attachments and much more. Attendance was strong as many bidders from all over the United States, once again took advantage of the great Florida weather The Yoder & Frey ringmen scan the crowd for one more bid and bargains on iron. before the gavel drops on another piece of iron.

Tim Thomas of Tractor & Equipment Company, Birmingham, Ala., jots down a couple of notes on a Komatsu WA450 wheel loader.

Brendan Wray of the Wrays LLC, Sawyer, Kan., considers a bid on the Volvo L180E wheel loader. Eager Beaver showed off its new 100-ton trailer — the 100 GSL. (L-R): Randy Hall, Johnny Gomez and Tina Flowers of Eager Beaver Trailers show it to Ken Harp of Superior Construction Company.

Yoder & Frey’s Sharon Bernath and the rest of the office personnel raced to keep up with all the paperwork and processing behind the scenes at the auction.

Mark Pentz of Calvin Group Inc., based in Colorado, came to the auction hoping to find some asphalt equipment bargains.

(L-R): Kevin Steward and Mickey Gibbs of Gibbs & Sons Machinery, Gadsden, Ala., talk with Peter Clark, president of Yoder & Frey Auctioneers Inc.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 85

Motorgraders, Wheel Loaders, More at Yoder & Frey Sale

According to Jo and Arden Shell of Arden Shell Truck and Equipment, the weather is much better here than in Michigan. see FREY page 86

(L-R): Jimmy Miller of Melway Paving joined Chase Hensley, Derrick Marx of Ray Hensley Incorporated, Andrew and Phil Schlabach of Melway Paving, along with Karla Whitt and Ken Hensley.

Auctioneer Joey Martin calls out another winning bid. (L-R): In for the auction from Wyoming, Mark Mahnen of Wyoming Machinery Company talks equipment with Ohio’s Butch Frey of Butch Frey Equipment and George Gessner of Newton Asphalt.

This American bald eagle seemed to be enjoying this demonstration of good old fashion American capitalism at its very best at the Yoder & Frey sale.

These guys from Abingdon, Va., were very interested in this Caterpillar IT28G tool carrier. (L-R): Danny Reynolds, Abingdon Equipment; Roger Rowe, Rogers Trucking; and Frank Stophel, Stophel Construction.

John Helton of Tractor World, Plant City, Fla., was looking over a lot of different equipment at the auction.

Page 86 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bidders Travel From Across United States to Attend Sale FREY from page 85

see FREY page 88

The proud new owner of this Caterpillar IT28G is Steve Mohre of M&M Asphalt, Blakeslee, Ohio. Clifford Miller of Miller Engineering, Marion, N.C., looks over this Hitachi excavator.

Tom Shaw of Shaw Equipment Co. looks over the Florida Auctions issue published by Construction Equipment Guide.

Monitoring the pricing of the motorgraders in the sale (L-R) are Jesus Ramirez, Gibbs & Sons Machinery, Gadsden, Ala.; Brent Beverly, BTM Machinery, Charleston, S.C.; and Don Gibbs, Gibbs & Sons Machinery. This Hitachi excavator may be going to Connecticut with Chris Davis of JHD Corp., if the price is right.

The staff of BTM Machinery, based in Charleston, S.C., were out in full force at the Yoder sale and (L-R) included Blake Thornton, Marsh Howard and Clay Thornton.

Another couple of snowbirds escaped the weather nightmare in New England. Oscar Plourde (L) from Suncook, N.H., and , John Neville of Neville Construction, Goffstown, N.H.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 87

Weekly Online Auctions THE BEST WAY TO BUY AND SELL USED EQUIPMENT. PERIOD. Hundreds of Inspected and Guaranteed Items for Sale

UPCOMING AUCTIONS: MARCH 5, 12, 19, 26-27

2004 Caterpillar 320CL Track Excavator

2003 John Deere 824J Wheel Loader

2001 John Deere 772CH Motor Grader

Telehandler elehandler 2008 SkyTrak 10054 T

Caterpillar 637EIIPP Motor Scraper

Trencor 665HD Trencher

S FAMILY F AMIL LY OF BRAND BRANDS

888-433-5426

W WWW.IRONPLANET.COM WW.IRONPLANET.COM

California ornia Auction A Company Bond #70259785. Preliminary eliminary list lis to date. Equipment subject to o change change. © 1999-2015 IronPlanet, onPlanet, Inc. All Rights Reserved. R IronPlanet®, IronClad onClad Assurance® a and Auctions you can trust® are regis egistered service marks of IronPlanet, o onPlanet, Inc. All other marks mark and brands are the property of their respective re owners.

Page 88 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Guests Enjoy Florida Weather During Seven-Day Auction FREY from page 86

Paul Dabbs (L) of Yancey Bros. Co., Atlanta, Ga., and Jamie Wurthmann of UCM Inc., Mulberry, Fla., strike a pose reminiscent of the SchwarzeneggerDeVito movie “Twins.”

Looking for deals while enjoying some terrific weather at the Florida auctions are Mike Zyndorf (L), Mike Zyndorf Equipment, Mays Landing, N.J., and Dan McHugh, Brookside Equipment Sales, Phillipston, Mass.

Guys with some serious deep thinking going on (L-R) are Clayton Mullins, Mullins Machinery, Hickory, Ky.; Victor Brown, Charles Brown Trucking, Hixson, Tenn.; and Billy Seals, Thompson Tractor, Birmingham, Ala.

This Hitachi excavator may be going to Connecticut with Chris Davis of JHD Corp., if the price is right. The office staff at Yoder & Frey once again managed the impossible — registering and attending to the needs of thousands of bidders.

(L-R): Jesse Hill, Megan Biddle of Hill Brothers Excavating along with Gene and Kim Gunter of EFG Paving and Nathan Hill, also of Hill Brothers Excavating, all of Delaware, hoped to take home this Takeuchi TL140 skid steer.

Jimmy Davis, president of Davis Auction in Conn., is sporting a new ATV.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 89

IronPlanet/Cat Auction Services Hold Joint Sale in Florida

ronPlanet and Cat Auction Services sold 1,430 items for $48.1 million in gross merchandise value at its live unreserved public auction in Kissimmee, Fla., which took place Feb. 11 to 13. The auction showcased equipment from 131 sellers, which included 25 Caterpillar dealers. A total of 21,284 people attended the auction, onsite and online, from 132 countries. see IROPNPLANET page 90

The inaugural sale was a great way to do some networking. (LR): Bo Ross, used equipment manager, Linder Machinery; Marc Howard, McAnear Machinery; Evan Ogrodowicz, Thompson Machinery; and Ryan Brouillette, Foley Equipment. Andy Litvinchuk (L), Americ Machinery Corp., and Adam Myers of Seymour, Ind., make their formal introductions.

Father and son team, Thomas and Tom Gage of Ohio’s Gage Excavating try out a Caterpillar 416F backhoe. Just like at a major sporting event, attendees could watch the construction equipment auction unfold on a Jumbotron.

If Cat Auctions and IronPlanet can work together, so can CEG and Rock & Dirt. Ed Bryden (L) of Construction Equipment Guide and Barry Lowery of Rock & Dirt trade complementary copies of their respective publications in the sale parking lot.

Mike Shane (L), M&M Equipment Sales Inc., and Carl Hoerr, Hoerr Machinery Co., talk about the Caterpillar dozers.

Several military surplus Humvees were available at GovPlanet, a new online auction division of IronPlanet.

Page 90 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attendees Watch Auction Action Unfold on Jumbotron IRONPLANET from page 89

see IROPNPLANET page 92

Mike Garrard (L), used equipment manager, Patten CAT, and Rich Evans, Cat Auction Services, discuss the auction.

Dean Adsit (L), Nortrax used equipment, congratulates Greg Owens, chairman and CEO of IronPlanet on the success on the first IronPlanet/Cat Auctions Services sale. Sergio Sicilia of All North Equipment LLC, Doral, Fla., considers a bid on this Caterpillar 325 excavator.

Doug Jones of Jones Equipment, New Windsor, Md., is at the controls of a Caterpillar 930K wheel loader. A very large lineup of like-new Caterpillar telehandlers went on the block at the IronPlanet/Cat Auction Services sale.

Bryn Smith of The N.I.C.E. Company in Boston was very impressed with this new approach to running an auction.

Steve DeBaun of Track II Corporation, Lakeville, Minn., checks the engine area on a Caterpillar D5N dozer.

Checking out a Caterpillar 308 loader that just might be leaving for Michigan, (L-R) are John Brewer, Dan Hoe Excavation, Holland, Mich.; and Jason and Jerry Brewer, both of BS&G Recycling, also of Holland, Mich.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 91

TWO INDUSTRY LEADERS TWO JOINT AUCTIONS ®

& DES MOINES, IA 1500 ZIEGLER DRIVE NW ALTOONA, IA 50009

HOSTED BY:

MARCH 2015

*DATE TO BE ANNOUNCED SOON - PLEASE CHECK WEBSITE

DENVER, CO 18000 E. SMITH ROAD AURORA, CO 80011

HOSTED BY:

APRIL 23, 2015 9:00AM MOUNTAIN TIME

ONLINE ONLY

DISPERSAL MARCH 26, 2015 COMPLETE SOUTHWEST CONTRACTING, LLC EQUIPMENT AVAILABLE FOR PREVIEW MARCH 23-25 22989 COUNTY RD. F ∙ CORTEZ, CO ∙ 81321

MORE AUCTIONS COMING UP - VISIT WEBSITES FOR UPDATED SCHEDULES: WWW.CATAUCTIONS.COM WWW.IRONPLANET.COM 855.228.2286 888.433.5426 © 2015 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, their respective logos and “Caterpillar Yellow,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Page 92 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NASCAR Number 31 Caterpillar Car Signals Start of Event IRONPLANET from page 90

see IROPNPLANET page 94

The Number 31 Caterpillar car, driven by Ryan Newman, was a contender for the NASCAR Sprint Series Championship right down to the final race of the season. At the IronPlanet/Cat Auction sale, the car was used to signal the start of the event. This tent — the size of a football field — was used to facilitate the auction.

Greg Owens, CEO of IronPlanet, offers opening remarks for this historic auction event.

Well informed staff members, who were ready to answer bidder questions, provided transportation from the parking lot to the registration area.

Max (L) and Jeff Miller, Trophy Tractor Inc., Grand Prairie, Texas, head to the auction area to bid on some of the iron at the sale.

A crowd gathers for the start of the sale.

Michael Goretski of Goretski Construction, Milford, Mich., tries out a 287C2 skid steer.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 93

ϳϱϬϬ zŽƌŬ ^ƚƌĞĞƚ ͻ ĞŶǀĞƌ͕ ŽůŽƌĂĚŽ ϴϬϮϮϵ ϳ ϱϬϬ zŽƌŬ ^ƚƌĞĞƚ ͻ ĞŶǀĞƌ͕ ŽůŽƌĂĚŽ ϴϬϮϮϵ

tĞĚŶĞƐĚĂǇ͕ DĂƌĐŚ ϭϭƚŚ Ͳ ϵ͗ϬϬĂŵ Dd t ĞĚŶĞƐĚĂǇ͕ DĂƌĐŚ ϭϭƚŚ Ͳ ϵ͗ϬϬĂŵ Dd //ŶƐƉĞĐƟŽŶ͗ DĂƌĐŚ ϵƚŚ Θ ϭϬƚŚ ĨƌŽŵ ϴĂŵ ƚŽ ϱƉŵ ŶƐƉĞĐƟŽŶ͗ DĂƌĐŚ ϵƚŚ Θ ϭϬƚŚ ĨƌŽŵ ϴĂŵ ƚŽ ϱƉŵ

ƵĐƟŽŶ ƚŽ /ŶĐůƵĚĞ tŚĞĞů >ŽĂĚĞƌƐ͕ ƵĐƟŽŶ ƚŽ /ŶĐůƵĚĞ tŚĞĞů >ŽĂĚĞƌƐ͕ ƌĂǁůĞƌƐ͕ DŽƚŽƌ 'ƌĂĚĞƌƐ͕ ,ǇĚƌĂƵůŝĐ ƌĂǁůĞƌƐ͕ DŽƚŽƌ 'ƌĂĚĞƌƐ͕ ,ǇĚƌĂƵůŝĐ ǆĐĂǀĂƚŽƌƐ͕ >ŽĂĚĞƌͬ ĂĐŬŚŽĞƐ͕ ^ŬŝĚ ǆĐĂǀĂƚŽƌƐ͕ >ŽĂĚĞƌͬ ĂĐŬŚŽĞƐ͕ ^ŬŝĚ ^ƚĞĞƌ >ŽĂĚĞƌƐ͕ ƵĐŬĞƚ dƌƵĐŬƐ͕ dƌƵĐŬ ^ƚĞĞƌ >ŽĂĚĞƌƐ͕ ƵĐŬĞƚ dƌƵĐŬƐ͕ dƌƵĐŬ dƌĂĐƚŽƌƐ͕ dĞůĞƐĐŽƉŝĐ &ŽƌŬůŝŌƐ͕ ƵŵƉ dƌĂĐƚŽƌƐ͕ dĞůĞƐĐŽƉŝĐ &ŽƌŬůŝŌƐ͕ ƵŵƉ dƌƵĐŬƐ͕ WŝĐŬƵƉƐ͕ &ůĂƚďĞĚ dƌƵĐŬƐ͕ dƌƵĐŬƐ͕ WŝĐŬƵƉƐ͕ &ůĂƚďĞĚ dƌƵĐŬƐ͕ dƌĂŝůĞƌƐ͕ hƟůŝƚǇ dƌƵĐŬƐ͕ ^ƚŽƌĂŐĞ dƌĂŝůĞƌƐ͕ hƟůŝƚǇ dƌƵĐŬƐ͕ ^ƚŽƌĂŐĞ ŽŶƚĂŝŶĞƌƐ͕ ŽŵƉĂĐƟŽŶ ƋƵŝƉŵĞŶƚ͕ ŽŶƚĂŝŶĞƌƐ͕ ŽŵƉĂĐƟŽŶ ƋƵŝƉŵĞŶƚ͕ ^ƚƌĞĞƚ ^ǁĞĞƉĞƌƐ͕ ƩĂĐŚŵĞŶƚƐ ĂŶĚ ^ƚƌĞĞƚ ^ǁĞĞƉĞƌƐ͕ ƩĂĐŚŵĞŶƚƐ ĂŶĚ DƵĐŚ DŽƌĞ͊ DƵĐŚ DŽƌĞ͊

Live Liv e Auction Auction in C Colorado olorado w/ Liv Live eO On-Line n-Line Bidding A Available vailable a att w www.RollerAuction.com ww.RollerAuction.com IIncluding ncluding E Equipment quipment fr from om Colorado C olorado Municipalities

ǁǁǁ͘ƌŽůůĞƌĂƵĐƟŽŶ͘ĐŽŵ ǁ ǁǁ͘ƌŽůůĞƌĂƵĐƟŽŶ͘ĐŽŵ ϳϱϬϬ zŽƌŬ ^ƚƌĞĞƚ ͻ ĞŶǀĞƌ͕ ŽůŽƌĂĚŽ ϴϬϮϮϵ ϳϱϬϬ zŽƌŬ ^ƚƌĞĞƚ ͻ ĞŶǀĞƌ͕ ŽůŽƌĂĚŽ ϴϬϮϮϵ ;;ϴϲϲͿ ϱϭϱͲϭϲϲϴ ͻ ǁǁǁ͘ƌŽůůĞƌĂƵĐƟŽŶ͘ĐŽŵ ϴϲϲͿ ϱϭϱͲϭϲϲϴ ͻ ǁǁǁ͘ƌŽůůĞƌĂƵĐƟŽŶ͘ĐŽŵ

Page 94 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Impressive Line of Excavators Among Sale Highlights IRONPLANET from page 92

Registration, as well as bidding, for the huge equipment auction could be done on site and online. Bidders could sign up to follow Cat Auctions on Facebook and Twitter.

An impressive line of excavators of every size and was among the sale highlights. Dan Samford (L), vice president, corporate equipment, Herzog Contracting Corp., and Chuck Fincham, Fincham Equipment Inc., look over the auction catalog.

Jeff Speer (L), used equipment manager, FABCO CAT, talks Caterpillar iron with Brandon Risk, Victoria Equipment Sales.

If you needed a part for your fleet, you could place your order on your way out of the sale.

Ken Heft (L) of Michigan CAT stands with Ted McKeon of Construction Equipment Guide.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 95

Ritchie Hosts Record-Breaking Global Auction in Orlando

itchie Bros. sold a record-breaking 10,500-plus equipment items and trucks at its global auction Feb. 16 to 20 in Orlando, Fla. The five-day unreserved public auction attracted 9,350plus onsite and online bidders from 81 countries and generated more than $179 million in gross auction proceeds, including a record $66-plus million sold to online buyers. Multiple Orlando auction site records also were set, including total number of registered bidders (more than 9,350), number of online bidders (more than 5,000), total number of buyers (more than 2,650), number of online buyers (more than 1,300) and number of sellers (875). “Our February Orlando auction is the largest auction we hold each year,” said Ravi Saligram, chief executive officer, Ritchie Bros. “The record 10,500-plus industrial assets sold at this year’s sale, and the record number of worldwide bidders the auction attracted, demonstrates the global reach and cross-sector appeal of this multi-day event. In fact, we sold more transportation sector assets at this sale than any of our previous Orlando auctions before, including a record 310 truck tractors on Friday. We’re also pleased with the strong performance of the transactions we underwrote at this auction.” Ritchie Bros. sold equipment for 875 sellers, including 80plus heavy construction items for Hermanos Yarull T. & Co., a civil engineering contractor based in the Dominican Republic. “This was our first time selling with Ritchie Bros. and we were blown away by the magnitude of the auction and the efficiency of how it all came together,” said Cesar Alvarez of Hermanos Yarull T. & Co. “We’ve been in business for more than 40 years and have tried selling equipment piece-bypiece in a variety of ways before and it was a headache. With Ritchie Bros. we just give all the equipment to them and it’s done. We get better resale prices and great customer service." The auction attracted equipment buyers from across North America and around the world, in person and online. Close to $144 million of equipment (or 80 percent) was sold to

Frank Smith (L) and Bob Shultz, both cash crop farmers from Michigan, check out the sale’s extensive fleet of agriculture equipment. Ritchie Bros. yard personnel wash off equipment prior to rolling over the auction ramp.

see RITCHIE page 98

Here’s a scale photo of Caterpillar D10 versus a midget electric car.

The five-day unreserved public auction attracted 9,350-plus onsite and online bidders from 81 countries and generated more than $179 million in gross auction proceeds, including a record $66-plus million sold to online buyers.

Ritchie Bros. auctioneers intensely worked the crowd of buyers when the excavators went up for bid on the lot.

A bird eye view of the ramp area from the Ritchie Bros. VIP room.

Page 96 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Online Bidding Available! Visit our Website for More Information

Full Service Auction at our Location or Yours! Located just off Hwy 169, 1 Mile North of Hwy 95 in Princeton, MN.

2001 15th St N, Princeton, MN 55371 • 763-389-5700 • Fax: 763-389-2408 www.waynepikeauction.com Heavy Equipment Auction Calendar: March 14, 2015 • June 6, 2015 • September 12, 2015 • December 5, 2015 March 14, 2015 '98 Dynaweld 80XHD Tri Axle Lowboy Trailer • '87 Grove 300B 40T Crane • ‘13 Cat 501HD Processor • ‘02 Cat Challenger MT765 tractor • '04 John Deere 160CLC Excavator • '98 Komatsu WA-500-L3 Wheel Loader • '11 Cat 277C Skid Steer • '11 Bobcat S-650 Skid Steer • '07 Ford F350 Crew Cab 4WD Pickup Truck • '99 R-Way 4021 Tri Axle Belly Dump Trailer • '13 Lamar CH14K TA Utility Trailer • '89 Krupp KMK4055 All Terrain Crane • '94 Komatsu WA-380-1 Wheel Loader • '91 Cobra Tri Axle End Dump Trailer • Bobcat 322 Excavator • '03 Elgin Pelican Series SE Sweeper • Cat 330L Hydraulic Excavator

We specialize in:

Services Offered: • • • • • • • • •

• Heavy Equipment: Excavators, Dozers, Loaders, Scrapers, Aerial Lifts, Semi Trucks, Trailers & Aggregate • All Construction Related Equipment; Attachments, Farm & Logging Equipment & Fleet Vehicles • Business and Complete Liquidations • Personal Property Auctions • Farm Auctions • Real Estate & Land Auctions • Bank Seized Assets

Appraisals Collateral Consulting for Financial Institutions Target Marketing Email Notifications Transportation Detailing Secured Storage Extensive Advertising Program Motor Vehicle Titling Services

Customers, Partners Should See Only Positive Change in Merge, Says Fabick

FABCO’s current headquarters facility in Milwaukee, Wis. MERGE from page 1

customer experience and bringing the added value of expanded scope and reach to every sales, rental, service and parts interaction. “The valued customers and partners of each dealership should see very little change in those who call on them or in processes that they are accustomed to and, if they do see changes over time, it will be with improvements that benefit them and make their experience with us even better,” said Jeré Fabick. The Fabick family heritage, in part-

The Fenton, Mo., Customer Engagement Center offers meeting space for industry associations and customers.

nership with Caterpillar, has endured for nearly 100 years since John Fabick Sr. founded the first Fabick company in 1917. A new chapter in this legacy is beginning, further strengthening John Fabick’s motto: “To Ever Serve Our Customers Better.” As the exclusive Cat dealers in their territories, FABCO and Fabick CAT rent, sell and service Cat construction machinery, trucks, engines and electric power generation equipment. “From jobsite equipment like skid

steer loaders, aerial lifts and portable power, to the big Cat machines that help build and maintain our infrastructure; FABCO and Fabick CAT supply essential products that improve the quality of life in our communities,” according to the companies. For more information, visit www.FABCO.com or www.fabickcat.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 97

Page 98 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Five-Day, Unreserved Pulic Auction Brings In More RITCHIE from page 95

buyers located outside the state of Florida, including more than $48 million (or 27 percent) sold to buyers outside the country. Buyers participated from as far away as Australia, Ecuador, Thailand, Italy, the United Kingdom and the United Arab Emirates. “We had a tremendous crowd at last week’s Orlando auction, with a large presence both on site and online,” said Steve Kriebel, regional sales manager, Ritchie Bros. “This resulted in strong prices throughout the week, particularly on crawler tractors, excavators and transportation equipment.” The record-setting selection of equipment in the Orlando auction included more than 500 compactors, more than 450 excavators and more (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipment- Rough-terrain cranes of every size from guide.com.) CEG virtually every manufacturer attracted buyers from all over the world. Jim Depuyat of Ontario, Canada, provides perspective of the imposing size of the Caterpillar D10.

Julius (L) and David Branscome of Branscome Paving, Manassas, Va., looked over this Wirtgen wheeled recycler.

Attention was paid to every detail of the event, including bussing bidders in and out of the sale site.

The Ritchie Bros. auction was a heavy machinery playground for young boys. These two were having a blast exploring this Caterpillar loader parked in the lot.

A John Deere 550G crawler tractor sports a telescoping boom for rotating tools, such as an auger.

Leonard Tag, an entrepreneur from New Jersey, fires up this Peterbilt. He came down to the auction hoping to find a good deal on some new trucks to haul salt for his business.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 99

Than 9,350 Onsite, Online Bidders From 81 Countries

Dave Ritchie (L), founder of Ritchie Bros., catches up with an old friend and customer, Marcel Lehouillier, president of Marcel Equipment LTD, London, Ontario. The record-setting selection of equipment in the Orlando auction included more than 500 compactors, more than 450 excavators, more than 270 wheel loaders, 240 crawler tractors, 310 truck tractors, 200-plus van trucks, 90-plus dump trucks and more.

(L-R): Jorge, Sophia and Deana Sanabria stand atop a 1997 Caterpillar 990 wheel loader. Jorge is the owner and president of ExpoQuip Inc. in Knoxville, Tenn, and his wife, Deana, handles government sales. The company exports equipment to the mines in Latin America.

(L-R): Tom Ball, senior vice president, Flagler CE Holdings LLC, poses for a photo with Volvo Remarketing Eastern Regional Manager Tara Stryker and Abdul Al-ololla at the Volvo Tier IV engine conversion kits booth.

Jerry Humphry (in cab) of Little Barbour Creek Farm in Eufaula, Ala., checks out a John Deere 544H, while Tony Scott, the farm manager, looks on.

Ritchie Bros. sold a record-breaking 10,500-plus equipment items and trucks at its global auction Feb. 16 to 20 in Orlando, Fla.

Richard Mackey (L) and Joe Slattery of MacTesta Contracting Corporation, Hopewell Junction, N.Y., were at the Ritchie Bros. sale looking to add to their fleet. see RITCHIE page 100

Page 100 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

First Time Sellers Remark on Easiness of Ritchie Sales RITCHIE from page 99

Jacob Guilfoyle, an operator of Gorman Brothers in Albany, N.Y., checks out the Wirtgen Reclamation machine and other paving machines for sale. Ritchie auctioneers work the crowds who gathered to buy screening plants outside on this chilly 40-degree morning.

Selling 200 acres of equipment in just five days requires multiple sale rings operating at the same time. This is the Ritchie Bros. virtual ring, for items that are not going over the ramp. (L-R): More than 9,300 bidders from over 80 countries attended the sale, including this group, Frank Coatta, Michigan; and Peter Montgomery, Fred Sanders and Pete Latin, all of Ontario, Canada. There are approximately 100 tractor loader backhoes lined up behind this one — all waiting in line to go over the ramp. This year’s sale featured many army surplus machines painted in camouflage.

The self-serve customer kiosks give customers access to the Web for online bidding.

Larry Holcomb of Windwood Bulk Center, Ringgold, Ga., was looking to buy a wheel loader at the Ritchie sale.

Thousands of bidders from around the world registered to bid on the opening day at Ritchie Bros. Orlando sale.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 101

2005 CAT 330CL WITH MAGNUM 7K LB HAMMER

2005 WESTERN STAR 4900FA

1992 CAT D8N

2007 CAT D8T

Find us online: TN FIRM # 2048

Page 102 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALEX PARIS CONTRACTING CO INC ................................................9 ALLIED CONSTRUCTION PRODUCTS ............................................61 ALLU GROUP ....................................................................................37 AMERICAN STATE EQUIPMENT ........................................................7 ARING EQUIPMENT CO INC ............................................................22 ARTIC SNOW & ICE CONTROL ........................................................38 ASC CONSTRUCTION EQUIP USA ........................................10,11,27 ATI CORPORATION/LEVEL BEST ......................................................6 BANDIT INDUSTRIES INC ................................................................63 BARGAINS ....................................................................................79,80 BID SPOTTER ..................................................................................101 CAT AUCTION SERVICES DES MOINES IA ........................................................................91 CATERPILLAR ..............................................................................58,59 CEG SCALE MODELS........................................................................30 CLASSIFIEDS ....................................................................................81 CLEARSPAN FABRIC STRUCTURES ..............................................33 CONSTRUCTION EQUIPMENT GUIDE PAVING COMPACTION & MILLING PROMO ............................68 AUCTION TRIPLE PLAY ............................................................97 REACH YOUR MARKET............................................................78 WANTED ....................................................................................82 DOOSAN INFRACORE AMERICA CORP ....................................52,53 DOOSAN PORTABLE POWER ..........................................................40 DOPPSTADT ......................................................................................56 DYNAPAC............................................................................................45 ERB EQUIPMENT ..............................................................................15 FABCO EQUIPMENT INC ....................................................................2 FARM-RITE EQUIPMENT INC..............................................................8 FELLING TRAILERS ......................................................................74,75 FINKBINER EQUIPMENT CO ..............................................................7 FLANGE LOCK ..................................................................................23 FLUID CONTROL SERVICES ............................................................33 FOLEY EQUIPMENT CO ....................................................................29 FURY MOTORS ..................................................................................77 GARY CARLSON EQUIPMENT..........................................................16 GROVE WORLDWIDE ......................................................................103 HOWELL TRACTOR & EQUIPMENT CO ........................................104 HYDRAULICIRCUIT TECHNOLOGY..................................................37 ILLINOIS TRUCK & EQUIPMENT ........................................................3 IRAY AUCTION FOLEY MN ................................................................................96 IRONPLANET......................................................................................87 JEFF BELZERS CHEVROLET ......................................................73,76 JOHN DEERE ....................................................................................51 KAWASAKI CONSTRUCTION MACHINERY......................................41 KLEEMAN............................................................................................62 KOMATSU AMERICA CORP................................................20,21,46,47 KPI-JCI ................................................................................................65 KUBOTA ..............................................................................................48

LEADING EDGE ATTACHMENTS INC ..............................................38 MATEJCEK IMPLEMENT....................................................................24 MCCANN INDUSTRIES INC ................................................................6 METSO MINERAL CRUSHING ..........................................................57 METSO MINERAL SCREENING ........................................................67 MID COUNTRY MACHINERY ............................................................32 MUELLER IMPLEMENT & RENTAL CO ............................................31 MUSTANG MFG ..................................................................................44 NITKE SALES INC WAUSAU WI ............................................................................101 NORAM ..........................................................................................42,43 NORTRAX-MIDWEST ....................................................................23,31 NTS TIRE SUPPLY ............................................................................76 PATTEN TRACTOR & EQUIPMENT CO ............................................19 POWERSCREEN MW DEALER ........................................................60 PURPLE WAVE INC............................................................................93 RANSOME EQUIPMENT SALES LLC................................................82 RAYCO ................................................................................................27 RDO EQUIPMENT/SCHARBER EQUIPMENT ..................................25 RITCHASON AUCTIONEERS LEBANON TN ..........................................................................101 ROAD BUILDERS MACHINERY....................................................17,37 ROAD MACHINERY & SUPPLIES......................................................13 ROGERS BROTHERS CORP ............................................................72 ROLAND MACHINERY INC ..................................................................5 ROLLER & ASSOCIATES AUCTIONEERS DENVER CO ..............................................................................93 ROTOTILT ..........................................................................................39 SCHAEFER ENTERPRISES ..............................................................38 SCREEN MACHINE INDUSTRIES ....................................................58 SENNEBOGEN ..................................................................................64 SMITHCO ............................................................................................72 STAR EQUIPMENT LTD ......................................................................6 TEREX CRANES ................................................................................49 TEREX FUCHS ..................................................................................66 TITAN RENTS ....................................................................................28 TOWMASTER INC ............................................................................71 VICTOR L PHILLIPS CO ....................................................................33 WAYNE PIKE AUCTION......................................................................96 ZIPS TRUCK EQUIPMENT ................................................................76 OHIO STATE SUPPLEMENT BOBCAT ENTERPRISES......................................................................3 COLUMBUS EQUIPMENT CO ............................................................8 EQUIPMENT CORP OF AMERICA ......................................................7 JCB OF OHIO........................................................................................7 MURPHY TRACTOR & EQUIPMENT CO ............................................5 RAYCO ..................................................................................................5 THE MCLEAN CO ..............................................................................4,6

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 28, 2015 • Page 103

The GMK6300L all-terrain crane At Grove, we provide high-performance features, reliable 24/7 support and a quality product lineup – because cranes are all we do. With 17 all-terrain models ranging from 40-450 USt, we’ve got a crane to handle any jobsite. Tilt cab

Featured is the GMK6300L – its 350 USt capacity, 263 ft. boom, Allison transmission and MEGATRAK™ suspension system are ideal for a wide range of applications and will keep you working.

MEGATRAK™

Need Financing? Removable outrigger box

For more information, visit www.manitowoccranes.com

Kirby Smith Machinery Inc.

Cleveland Crane & Shovel Sales, Inc.

12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700 6715 W. Reno Ave. Oklahoma City, OK 73127 405/495-7820 8320 Ruby Ave. Kansas City, KS 913/850-6300 877/851-5729

26781 Cannon Road Cleveland, OH 44146 440/439-4749 800/362-8494 Fax: 440/439-2177 aforepaugh@ craneandshovel.net www.craneandshovel.net

Walter Payton Power Equipment LLC 930 W 138th Street Riverdale, IL 60827 708/656-7700 Fax: 708/532-1273 25210 Brest Road Taylor, MI 48180 734/947-9250 Fax: 734/947-9260

920 S State Road 39 Lebanon, IN 46052 765/482-4145 Fax: 765/482-4928 3400 Claremont Avenue Evansville, IN 47712 812/422-6912 Fax: 812/422-6982

Aspen Equipment Company

American State Equipment Co. Inc.

www.aspenequipment.com 1525 S.E. Cortina Dr. Ankeny, IA 50021 515/965-1000 Fax: 515-965-1790 11475 S. 153rd St. Omaha, NE 68138 402/894-9300 Fax: 402-894-9302

www.amstate.com 2055 South 108th Street Milwaukee, WI 53227 414/541-8700 2400 North 14th Avenue Wausau, WI 54401 800/242-7113 13915 Lake Drive Columbus, MN 55025 651/464-0996 2385 Becks Road Duluth, MN 55810 218/260-0581

Page 104 • February 28, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE