Midwest #11, 2012 by Construction Equipment Guide

$3.00

Published Nationally

Midwest Edition

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 4

May 26, 2012 • Vol. IXX • No. 11 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910 • www.constructionequipmentguide.com

Inside

Minn. Senate Volleys $496M Construction Bill By Alexandra Tempus ASSOCIATED PRESS

Fabick CAT Celebrates Groundbreaking...12

Increasing a two-lane roadway to four lanes is expected to improve traffic flow and reduce the number of serious crashes on Highway 23 from Highway 95 east of St. Cloud, Minn., to Highway 25 in Foley, Minn. Highway 23 is a direct route between the regional centers of Wilmar, St. Cloud and Duluth and is classified as an Interregional Corridor. The existing highway is a heavily traveled rural two-lane roadway with a history of fatal and serious injury crashes, according to the Minnesota Department of Transportation. In 2006, about 7,300 vehicles traveled this stretch of Highway 23. This number is expected to grow to about 14,000 vehicles each day by 2030.

ST. PAUL, Minn. (AP) A nearly $500 million construction package cleared the Minnesota Legislature on May 7, but has to revisit the House after the Senate squeezed in more projects. The Senate approved the bill 45-22 on May 7, hours after it easily passed the House on a 99-32 vote. The legislation would borrow $496 million for statewide construction, including work on campus buildings, bridges and roads, flood mitigation and renovations to the state Capitol building. The bill evolved from numerous borrowing proposals reworked throughout the session, and includes more money for state college buildings, flood prevention and transportation projects than earlier versions. It provides less for renovations at the state Capitol — $44 million down from $221 million once put forward for a full-scale restoration. Rep. Larry Howes, R-Walker, the bill’s sponsor, said it had support from both parties and in both chambers. Senate Majority Leader Dave Senjem said the package focused on preserving buildings the state already has. “It’s a difficult task. We’ve got a lot of assets out there, a tremendous number of buildings, tremendous number of things to take care of,” said Senjem, RRochester. The Senate tweaked the House version, voting to move $2.5 million from an economic development

see EXPANSION page 52

see BILL page 70

Resurfacing the two-lane section of Highway 23 from Highway 25 to the east limits of Foley will also take place in 2012, along with the installation of a new pipe for the storm water retention pond, which will be constructed northeast of the highway 23/25 intersection. IAA P Holds 44th Annual Convention...16

Highway 23 in Foley, Minn. Readies for Expansion By Dorinda Anderson CEG CORRESPONDENT

Tit an Machi nery Hos ts Open Hou se.. .22

Table of Contents ................4 Attachment Section ....35-39 Truck & Trailer Section ........ ......................................41-51 Parts Section ....................42 Recycling Section ........53-65 Auction Section ..........84-93 Business Calendar ............92 Advertisers Index ..............94

Change to WTC Raises Questions Over Height By Meghan Barr ASSOCIATED PRESS

NEW YORK (AP) A change to the design of a needle that will sit atop One World Trade Center is raising questions over whether the building will still be America’s tallest when

completed. The 408-ft. (124-m) needle will no longer be enclosed in a fiberglass-and-steel enclosure called a radome, a feature that was recently removed from the original design because the building’s developer said it would be impossible to properly maintain or repair it.

Without the enclosure, it’s unclear whether the needle is an antenna or a spire — a crucial distinction in terms of measuring the building’s height. Without the spire, One World Trade Center would actually be shorter than the Willis Tower in Chicago, which currently wears the see WTC page 88

Page 2 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Call 877-688-2228 Fax: 630-279-9243 www.pattencat.com Complete inventory available online

MOTORGRADERS

SKID STEERS

Cat 140M, 2008, N5606, EROPS, A/C, Heat ....................$265,000

Cat 226B2, 2009, W2130 NA, EROPS, Hyd QC ................$29,000 Cat 252B2, 2005, UE1485, EROPS, Heat ..........................$26,500

COMPACTION

Cat 236B, 2005, UE1233, EROPS, Heat, Self-Leveling ......$25,000

PATTEN CONSTRUCTION PRODUCTS

Cat 246C, 2008, UE1047, EROPS, Heat, Aux Hyd ............$36,000 Cat 247B, 2008, UE1549, EROPS, Heat, A/C, QC ..............$23,300

Cat CP433E, 2005, UN2062, OROPS ................................$56,000

ID# N4761 $49,000

Cat 252B2, 2005, UE1485, EROPS, 2-Speed, Man QC ......$26,500

Cat CS54, 2008, N5757, OROPS, Sm Drum ....................$110,000 Cat CS-433E, 2005, UN2129, OROPS................................$48,000

Cat 256C, 2007, W1533, EROPS, Heat, A/C ......................$32,000

TRACK LOADERS

Cat 256C, 2007, W1531, EROPS, Heat, Hyd QC, SF Hyd ..$34,000 Cat 257B, 2005, W0539, Self-Leveling, Man QC ..............$25,000

Cat 953C, 2006, N4908, EROPS, A/C, GP Bkt....................$90,000

Cat 257B, 2007, W1522, EROPS, Heat ..............................$29,000

Cat 953D, 2008, N5790, EROPS, 2.25 CYD GP Bkt ........$179,000

Cat 272C, 2007, W1905 NA, EROPS, Heat, A/C ................$42,000

ID# UN1922 $122,000

Cat 963C, 2005, N4354, EROPS, A/C, GP Bkt ................$125,000

Cat 287B, 2007, W1561, Self-Leveling, Man QC ..............$37,000

Cat 963D, 2008, N5718, EROPS, GP Bkt ........................$170,000

Cat 287B, 2007, W1562, OROPS, Self-Leveling ................$35,000

Cat 963D, 2008, N5643, EROPS, Heat ............................$180,000

Cat 289C, 2009, W2058, EROPS, Heat, A/C ......................$45,000

Cat 963D, 2008, N5642, EROPS, GP Bkt ........................$180,000

Cat 289C, 2009, W2115, EROPS, Heat, Hyd QC ................$57,000

TELEHANDLERS

John Deere 320D, 2011, UE1603, EROPS, Bkt ................$34,000

Cat TH360B, 2006, N4761, EROPS, Heat, A/C ..................$51,500

DOZERS Cat D4K LGP, 2008, N5801, EROPS, 3rd Valve ................$85,000

ID# N5606 $254,000

WHEEL LOADERS/LOADER BACKHOES

Cat D5G LGP, 2006, N4976, EROPS, Heat ........................$68,000 Cat 416E, 2007, N5303, EROPS, Heat, A/C, E-Stick ..........$78,000 Cat D5G XL, 2007, N5413, EROPS, Heat, A/C ..................$80,000 Cat 420E IT, 2008, UE1253, EROPS, Heat, A/C, E-Stick ....$70,000 Cat D5G XL, 2007, N5601, EROPS, Heat, A/C ..................$84,000 Cat 430E, 2007, N5471, EROPS, Heat, A/C, Ride Cntrl......$82,000 Cat D5K LGP, 2008, N5710, EROPS, 3rd Valve, Hyd ........$98,000 Cat 430E, 2007, N5415, EROPS, Heat, A/C, QC ................$94,000 Cat D5K LGP, 2008, N5785, EROPS, 3rd Valve ..............$120,000 Cat 430E IT, 2006, N5209, EROPS, A/C, E-Stick................$56,000

Cat D6K XL, 2007, N5337, EROPS, 4th Valve..................$135,000

Cat 906H, 2009, UE1497, EROPS, Ride Ctrl, QC ..............$68,000

Cat D6T LGP, 2008, UN2165, EROPS, ARO Ready ..........$265,000

Cat 924GZ, 2007, N6145, EROPS, Heat, Ride Control ......$98,000

EXCAVATORS Cat 303CCR, 2007, W1168, EROPS, 2-Way Aux Hyd ........$30,000

Cat 924GZ, 2008, N6148, EROPS, Heat, A/C, 2.6 CuYd Bkt ....$94,000

ID# N5246 $186,000

Cat 924H, 2007, N5786, EROPS, Heat, A/C, 2.6 CYD Bkt$102,000

Cat 305CR, 2005, W0279, EROPS, A/C, Long Stick ..........$34,000

Cat 930G, 2007, N5772, EROPS, 2.9 CYD Bkt, Ride Cntl ..$115,000

Cat 308C CR, 2005, N3784, 7’3” Stick, QC ......................$58,000

Cat 930H, 2008, N5661, EROPS, Ride Cntl ........................$132,000

Cat 315CL, 2006, N4867, EROPS, Heat, A/C, QC ..............$80,000

Cat 938GII, 2006, N5064, EROPS, A/C, Heat, Ride Cntrl $122,000

Cat 315CL, 2007, N5239, EROPS, 10’2” Stick, QC ............$85,000

Cat 938GII, 2006, UE1454, EROPS, Heat, A/C ................$105,000 Cat 950H, 2007, N5284, EROPS, Heat, Ride Cntrl ..........$175,000

Chad Benz 630-758-1226 benzc@pattenindustries.com

Cat 950H, 2007, N5594, EROPS, Heat, Ride Cntrl ..........$190,000 Cat 980H, 2008, UE1484, EROPS, Heat, A/C ..................$364,000

ID# N5413 $80,000

CALL 887-688-2228

Cat IT-38G II, 2007, UE1494, EROPS, A/C, GP Bkt..........$112,000

INVENTORY CHANGES DAILY

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 3

Lar Largest arrg gest Independent Rental R F Fleet in the Midwest!!

Over 600 units available for rent!! Including: ncludi 100 Hydraulic Hy Excavators 50 Bulldozers 50 Wheel Loaders 30 Articulated Dump p Trucks Trucks r

S Service ervice

Parts Parts

Factory F actorry T Tr Trained rained S Service ervicce Technicians, Complete Rebuild T echnicianss, C omplette R ebuild Services S ervices & Welding Welding

Authorized Authorized Dealer Dealer for LaBounty, LaBountty, Kobelco K Kob obelco and and Kawasaki K Kaw aw wasaki

Illinois T Truck ruck & Equipment 320 Briscoe Drive Morris, Illinois 60450 T Toll oll Free: (800) 941-2133 941 Fax: (815) 941-1486 Email: sales@iltruck.com

Page 4 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWEST EDITION Circulated Throughout

IN THIS ISSUE SPECIAL SECTION…

RECYCLING, CRUSHING AND SCREENING Be sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

FEATURES…

FABICK CAT CELEBRATES GROUNDBREAKING IN FENTON

The Chamber of Commerce welcomes the addition and believes that this will bring great things to Fenton’s community and trade industries.

MARCH CONSTRUCTION EMPLOYMENT DIPS BY 7,000 BUT RISES 1 PERCENT FROM A YEAR AGO

AGC officials said the pickup in construction jobs is likely to remain anemic and unbalanced unless there is adequate funding for long-term infrastructure programs.

SEMINARS, EXPO HIGHLIGHT SUCCESSFUL IAAP CONVENTION

TITAN MACHINERY - SHAKOPEE HOLDS OPEN HOUSE EVENT

The all-day event was filled with informative seminars and the expo gave members a chance to network.

The day highlighted equipment from Case, JLG, Wacker Neuson, Sidump’R, Leica Geosystems and Towmaster Trailers.

SENATE VOTE CLEARS VIKINGS FOR STADIUM

SANY SCC8100 CRANE AIDS IN NORTH DAKOTA OIL BOOM

Stadium backers talked about the pain of losing the Lakers and the North Stars to other states in past decades, and said they were inundated with messages from Vikings fans urging them to keep the team here.

SANY America markets, rough terrain cranes, crawler cranes, excavators, and port machinery in North America.

TRANSCANADA REAPPLIES FOR KEYSTONE XL OIL PIPELINE WITH ROUTE CHANGES

Calgary-based TransCanada had proposed a new route in April that would veer east around the groundwater-rich Sandhills region before looping back to the original route.

Founder, Publisher & CEO Midwest Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr. Main office

Toll Free Fax Web site Editorial e-mail Advertising e-mail For advertising rates Contact

•North & South Dakota •Nebraska •Kansas •Minnesota •Iowa •Missouri •Illinois •Wisconsin •Michigan •Indiana •Ohio •Kentucky Edwin M. McKeon Sr. Joseph S. McKeon Craig Mongeau Ken Kolasinski Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com Joseph S. McKeon •Illinois •Wisconsin •Northwest Indiana •Missouri •Kansas

773/769-4090 800/632-0233 773/769-4280 e-mail jmckeon@cegltd.com

Toll Free Fax

Contact

Ed Bryden •Central and Eastern Indiana •Michigan •Ohio •Kentucky

440/268-9690 800/810-7640 440/268-9691 e-mail ebryden@cegltd.com

Toll Free Fax

Contact

Patrick Kiel •Iowa •Minnesota •Nebraska •North Dakota •South Dakota

952/353-1770 866/413-4265 952/353-2750 e-mail pkiel@cegltd.com

Toll Free Fax

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

82 CLASSIFIEDS 84 COMING AUCTIONS 92 BUSINESS CALENDAR

EQUIPMENT… 90 JOHN DEERE K-Series Backhoe/Tractor Loaders

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2012, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 5

We Buy USED Equipment – One Piece or Entire Fleets – Call Jay Germann

Komatsu WA200-5L, 07, 1,706 hrs ........$99,500

Vogele Super 700, 11, 81 hrs ....................$CALL

AIR CURTIN DESTRUCTORS

COMPACTION

SHREDDERS, TROMMELS

Concept Products CP2000, ’05........................$13,500

Bomag BW124DH3, ’04, 1108 hrs ..................$22,500 Cat C563, ’94, 5,794 hrs..................................$31,500 Hamm HD13, ’06, 320 hrs ..............................$29,500 Hamm HD14VV, ’08, 816 hrs ..........................$32,500 Hamm HD14VT, ’09, 1,083 hrs ........................$32,500

Doppstadt SM617, ’09, 290 hrs ........................$CALL Doppstadt SM720, ’09, 235 hrs ........................$CALL Doppstadt SM726, ’09, 257 hrs ..........................$CAL

PAVING Blaw Knox PF510, ’93, 2,721 hrs ....................$11,500 LeeBoy 1000D, ’03, 1,475 hrs ........................$19,500 LeeBoy 8500HD, ’10, 2,140 hrs ......................$54,500 LeeBoy 8500LD, ‘03, 3683 hrs ........................$19,500 LeeBoy 8500LD, ‘04, 2,739 hrs ......................$26,500 LeeBoy 8500LD, ‘05, 3200 hrs ........................$19,500 LeeBoy 8515B, ’09, 1260 hrs ..........................$59,500 Vogele SUPER 700, ’07, 80 hrs ........................$CALL Vogele Super 700, ’11, 81 hrs ......................$144,500

DOZERS

WHEEL LOADERS Cat 980G, ’03, 15,594 hrs..............................$124,500 Komatsu WA200-5, ’05, 617 hrs ....................$97,500 Komatsu WA200-5L, ’07, 1,706 hrs ................$99,500 Komatsu WA200-5L, ’07, 1,577 hrs ................$99,500 Komatsu WA320-5, ’06, 3,585 hrs ..................$96,500 Komatsu WA320-6, ’08, 3961 hrs ................$126,500 Komatsu WA380-5, ‘06, 4965 hrs ................$132,500 Komatsu WA400-5L, ’04, 7,169 hrs ................$94,500 Komatsu WA400-5, ’05, 6887 hrs ..................$89,500 Komatsu WA400-5, ’05, 8218 hrs ..................$89,500 Komatsu WA450-6, ’07, 7,355 hrs ................$196,500

Komatsu HD785-5, ’01, 22,508 hrs....................$CALL Komatsu HD785-5, ’01, 25,415 hrs....................$CALL

Case 850K XLT, ’04, 2,646 hrs ........................$47,500 Cat D4G, ’06, 691 hrs ......................................$72,500 Cat D5C, ’97, 6931 hrs ....................................$26,500 Komatsu D37P-5, ’94, UKN hrs ......................$18,500 Komatsu D37P-5, ’98, 2,624 hrs ....................$21,500 Komatsu D39P-1, ’97, 6,189 hrs ....................$27,500 Komatsu D39EX-21A, ’05, 1,176 hrs ..............$57,500 Komatsu D51PX-22, ’08, 2,436 hrs ..............$129,500 Komatsu D61EX-15, ’05, 4,778 hrs ..............$114,500 Komatsu D61PX-15, ’05, 8,864 hrs ................$77,500 Komatsu D65EX-15, ‘05, 5,312 hrs ..............$129,500 Komatsu D65PX-15EO, ’06, 3199 hrs............$146,500 Komatsu D65PX-15EO, ’08, 5,372 hrs ..........$127,500 Komatsu D65PX-12, ‘96, 4,969 hrs ................$49,500 Komatsu D155AX-5, ’03, 6,809 hrs ..............$224,500

BACKHOE LOADER

EXCAVATORS

Deere 548E, ’91, 15,300 hrs............................$32,000 Deere 653/Slingshot Heat, ’97........................$25,000 Franklin 132XL Forwarder ..............................$14,000 Franklin 3000/Stroke Head, ’92 ........................$9,800 Timberjack 610 Forwarder, ’96 ......................$35,000 Valmet 415EX/380, ’07, 5275 hrs..................$198,000 Valmet 840.2/6, ’06 ......................................$165,000 Valmet 840.3/8, ’06, 9,592 hrs ....................$180,000 Valmet 911.3/370.2, ’04, 10,511 hrs ............$168,000

Komatsu WB140-2N, ’04, 2,805 hrs ..................$CALL

Case CX240B, ’07, 4810 hrs..........................$114,500 Fuchs MHL350B, ’05, 9931 hrs ....................$149,500 Komatsu PC88MR-8, ‘09, 1195 hrs ................$92,500 Komatsu PC138USLC-8, ’09, 2,363 hrs ........$104,500 Komatsu PC138USLC-2EO, ’07, 4377 hrs ......$69,500 Komatsu PC138USLC-8, ’07, 3935 hrs............$77,500 Komatsu PC220LC-8, ’09, 4,020 hrs ............$149,500 Komatsu PC220LC-8, ’09, 5,789 hrs ............$114,500 Komatsu PC270LC-7, ’04, 4,608 hrs ............$124,500 Komatsu PC300LC-7, ’02, 4,887 hrs ............$134,500 Komatsu PC300LC-7EO, ’06, 4,609 hrs ........$144,500 Komatsu PC300LC-8, ’09, 1,660 hrs ............$215,500 Komatsu PC400LC-8, ’07, 2,811 hrs ............$239,500 Komatsu PC750LC-7, ‘05, 4,517 hrs..................$CALL Sennebogen 850M, ’07......................................$CALL

LeeBoy 8500HD, 10, 2,140 hrs................$54,500

MILLING Wirtgen W1900, ‘06, 3902 hrs ..........................$CALL Wirtgen W2000, ’03, 2,996 hrs..........................$CALL Wirtgen W2000, ’96, 9,346 hrs..........................$CALL Wirtgen WR2000, ’11, 334 hrs ..........................$CALL Wirtgen WR2500S, ’07, 3,100 hrs ....................$CALL

OFF ROAD TRUCKS

Komatsu PC220LC-8, ’09, 4,020 hrs ....$149,500

V I S I T

FORESTRY

Financing Available for Qualified Buyers

15 Roland Branch Locations in IL, IN, MI, MO, and WI

Call Jay Germann (217) 789-7711 • Email: jgermann@rolandmachinery.com

R O L A N D M A C H I N E R Y . C O M

Page 6 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke • (630) 739-7770

Excavator Rental Specials Bolingbrook, IL

Serving the Constructor ®

View our complete Used & “Like New” inventory at McCannOnline.com

Clean, reliable equipment

Competitive rates

Rent by the day, week, or month

2002 Case 60XT, s/n JAF0350383, 2300 Hours, Rops, Aux hyds, 12 X 16.5 Foam Filled Tires, New 73 inch Bucket $15,000

CX130 Excavator

Delivered to your job site

2002 Case 40XT, s/n JAF0384845, 1300 Hours, Rops, Cold Start, Foot Throttle, 10 x 16.5 Tires, 66 inch Bucket $13,500

CX160 Excavator

MC r h EJH EFQUI $410/Day, $1,230/Week, $3,690/Month

2006 Case MC r h EJH EFQUI CX330, s/n $1,425/Week, $4,275/Month $475/Day, N6SAP7025, 5100 Hours, Cab w/Heat /AC, Boom 21'2", arm 13'3", 31.5" -3-Bar Steel Shoes, Control selector Valve, Kent Coupler $137,000

2004 Takeuchi TL130, s/n 21302831, 4500 Hours, Rops, Tak Controls, 67 inch Smooth Bucket $19,500

Illinois Addison 630-627-0000 Bolingbrook* 630-739-7770 Chicago 312-942-9200

CX210 Excavator

CX225 Excavator

2007 Case MC r h EJH EFQUI 440CT, s/n $5,220/Month $580/Day, $1,740/Week, N7M483428, 2234 Hours, Cab w/Heat and AC, 2 Speed, Hyd Bkt Coupler, Ride Control, 76" Tooth Bucket $25,000

MC r h EJH EFQUI2008 Ausa Dumper, s/n $755/ Day, $2,265/Week, $6,795/Month 09259426, 110 Hours, 1.37 Cu Yrd Dumper, 13 Hp Hatz Diesel, 2wd $7,000

Rent Today!

Crestwood 708-597-3110 McHenry* 815-385-0420 Wauconda 847-526-9444

Indiana CX240 Excavator

CX330 Excavator

MC r h EJH EFQUI $700/Day, $2,100/Week, $6,300/Month

MC r h EJH EFQUI MC r h EJH EFQUI equipment. Call us today to supply your next $875/Day, $2,625/Week, $7,875/Month $1,235/Day, $3,705/Week, $11,115/Month

Mustang 442 Skid Loader, 40HP, Open Canopy, Single Pin, I/D: 6419222308, 5252 Hrs, $8,995

McCann CX460 Rents aExcavator full line of heavy and light construction rental. McCannOnline.com

Allen Engineering MSP415, 35HP, 4’ Rotors, I/D: 008005, 215 Hrs, A Warranty, $12,250

Mustang ME7503ZT, 16,000# Excavator, Cab, Heat, I/D: C03291, 1700 Hrs, Zero Tail Swing, $55,995

Elliott L40R, Hi-Reach Truck w/45’ Working Height, I/D: EX5186, 40 Hrs, $111,095 Sale or Rent

★ CONSTRUCTION

EQUIPMENT & SUPPLIES SINCE 1968

EQUIPMENT LT D .

*Case authorized dealer location

Bobcat T630 Track Loader, 80HP, Cab, I/D: PU11068, 910 Hrs, Looks and Runs Super, A Warranty, $39,995

Gehl DL6, 6000# Lift, 42’ Boom, Open Canopy, Outriggers, I/D: 320796, 2770 Hrs, Warranty, $31,950

STAR

Schererville* 219-865-6545

Call Sales 515-283-2215 • 800-352-5401 1401 2nd Ave • Des Moines, IA 50314 CHECK OUT OUR WEBSITE: www.starequip.com

Des Moines • Ames • Cedar Rapids • Waterloo

CALL DOUG OR SAM (866) 485-7180 WWW.RBUSED.COM

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 7

1999 Cat 365BL ..................................$109,500

1968 Cat 824B ......................................$24,000

Cat 426C ................................................$31,500

2004 Cat D6R XW II............................$195,000

S/N 9TZ00327, 11,345 hours, erops, bucket, paint and u/c good

S/N 36H00658, OROPS, S blade, sheeps foot pads good, engine rebuilt in 2009

S/N 6XN03727, 5174 Hrs, EROPS, E-Stick, 4x4, 24” Bkt, Tires Good

S/N AEP00323, 2175 hrs, EROPS, A/C, SU blade, GPS, drawbar, U/C at 65%

1986 Fiat Allis FG95A ..........................$18,500

1979 Cat 631D ......................................$45,100

1983 Cat D6D ........................................$34,000

2004 Gehl 4840 ......................................$14,500

S/N 45M00169, 12636 hours, erops, 14' blade, tires fair

S/N 24W02603, 9284 hours, orops, tires fair

S/N 04X08892, 2574 hours, orops, u/c fair, sheet metal good, frame hours unknown

S/N 406754, 2067 Hrs, Orops, 2-speed, hydraulic coupler, bucket, tires poor

2006 Cat D5KLGP................................$115,000

1998 Cat IT28G......................................$47,500

1994 Case 850G ....................................$27,500

1999 D250EII..........................................$55,000

S/N YYY00151, 1504 hrs, Erops, A/C, 26” tracks, blade

S/N 8CR01529, 16,143 Hrs, EROPS, Std Differentials, Tires 50%, Bkt

S/NJJG0217270, 7871 hours, orops, sweeps, P.A.T. blade rear screen, u/c good to fair

S/N 4PS00253, 8070 hrs, EROPS, A/C, radio, new paint at 7,556 hrs

2006 Cat 216B ......................................$18,500

2000 CAT D5CXLIII................................$29,500

1993 Bomag BW202AD ......................$22,500

1987 Cat D8N ........................................$82,500

S/N RLL03958, 1050 hrs, Orops, bucket, man quick coupler, heat, 1-speed

S/N 7PS01311, 3315 Hrs, EROPS, Undercarriage Fair

S/N 109640600102, 3160 Hrs, Orops, 84" double drum, asphalt roller, water system

S/N 9TC01019, hrs unknown, erops, su blade, drawbar, u/c good

Please Contact Bob Williams or Jeff Speer

800/353-1944

414/461-9100

Outside WI & Upper Michigan

Within WI & Upper Michigan

11200 W Silver Spring Rd. Milwaukee, WI 53225

www.FABCO.com Hundreds of machines. Listings updated daily.

Page 8 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NEW M SERIES IN STOCK! Authorized Bobcat® Dealer

Toolcats in Stock, Call for Pricing

New Bobcat S160, Call for Pricing

Bobcat Forestry Cutter on T320, for Rent

Largest Selection in the Midwest! Bobcat Excavators in Stock, Call for Pricing

Bobcat Tractors in Stock Now! Call for Pricing.

USED EQUIPMENT ®

Authorized Bobcat Dealer Bobcat 440 ................Starting at $4,500 Bobcat 463’s ..............Starting at $8,000 Bobcat 542B ..............Starting at $6,900 Bobcat 642 ..............................$7,500 Bobcat 642B ............................$8,500 Bobcat 743 ................Starting at $8,000 Bobcat 751 ......Several Starting at $9,900 Bobcat 753 ..............Starting at $10,000 Bobcat 763F, Series, Open Cab ....$11,500

Bobcat 773G, With Heat ............$15,900 Bobcat 843, Heated Cab ............$10,000 Bobcat 853’s ............Starting at $11,000 Bobcat 863, With Heat ..............$12,900 Bobcat 863G ............................14,900 Bobcat 873 ............................$17,900 Bobcat S130, 2006, Heated Cab ......CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours....Starting at $14,900 Bobcat S250..............Starting at $17,500

Compact Track Machines Bobcat T190’s............Starting at $17,500 Bobcat T200..............Starting at $17,500 Bobcat T250, Gold ......Starting at $24,500 Bobcat T300..............Starting at $25,000

Other Brands Gehl 4615 Skidloader, Open Canopy $8,500 Mustang 2105 ............................CALL New Holland L175........................CALL John Deere 250/260 Models Available...... ..............................................CALL

Excavators Bobcat 331’s, Several w/Heat & Open Canopys ..................Starting at $15,900 Bobcat 334 ................................CALL Bobcat 337D, A/C, HT ................$35,900 Bobcat 341 ..............Starting at $29,990 Bobcat 442 ....Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500 www.farmriteequip.com U.S. Hwy 12 W Dassel, MN 55325

320/275-2737 • Toll Free 888/679-4857

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees WHEEL LOADERS Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25 rubber, 15K hours, work ready . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42,500 Komatsu WA250-3PT, 1999, EROPS w/AC, JRB coupler, bucket, forks 20.5x25, good cond. . . . . . . . . . . . . . . . . . . . . . . .$63,500 Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 $79,500 John Deere 624G, 1996, EROPS, quick coupler, GP bkt, 20.5x25 tires . . . . . . .$46,000 Volvo L60E, 2005, EROPS, coupler, aux hyd, boom susp, 20.5R25, v. good . . . .$89,500 COMPACTORS IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . .$62,500 IR SD70D, 2000, Pro-Pac, 66" smooth drum, ROPS . . . . . . . . . . . . . . . . . . . . . . .$49,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . .$205,000 (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready . . . . . . .From $79,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . . . . . . . . . . . . . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . .$4,000 - $6,500 LANDSCAPING Case 480 Broom Tractor, frt mounted 6' sweepster broom, ROPS . . . . . . . .$13,000 Case/IH 485 Utility Tractor, 1986, Case 3 cyl dsl engine, 55 gal water tank . . . . .$10,500 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" hydraulic broom . . . . . .$11,500 Taylor-Way 12' Transport Disc, 24" discs, (4) tires, hyd lift, exc . . . . . . . . . . . . . .$15,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd angle tongue, scrapers, 2” axles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,500

CRAWLER LOADERS MOTOR SCRAPERS Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt. Cat 613C Water Wagon, 1994, 5000 gal drop . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37,500 tank, ROPS, spray heads . . . . . . . .$49,500 Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . .$46,000 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition . . . . . . . . . . . . . . .CALL OFF ROAD HAULERS Cat 621E, 1989, Scraper, OROPS, 33.25x29, Komatsu CD60R-1 Crawler Dump Truck, very nice . . . . . . . . . . . . . . . . . . . . . . .CALL 1997, 360° rotation . . . . . . . . . . . .$66,000 (2) Cat 637 scrapers, 1975, 91P series, dual Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. side- engine, OROPS, good rubber . .$23,500 Ea. boards, tailgate (currently off work), work HYDRAULIC EXCAVATORS ready . . . . . . . . . . . . . . . . . . . . . . .$127,500 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, JD 490E, 1994, 9'11" stick, Aux. hydraulics, 29.5R25, working everyday . . . . .$145,000 quick coupler, 6-7000 hrs, Fleet maintained . Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29,000 hitch rebuilt . . . . . . . . . . . . . . . . .$115,000 Hitachi UH181, 1985, Equipped w/hammer . Volvo A40, 1995, 40 tons, 395 hp, 8WD, . . . . . . . . . . . . . . . . . . . . . . . . . . . .$72,000 29.5R25, A/C, P/S trans, tailgate, work ready Gradall-Hopto 300, 1968, G.M. diesel UP, on . . . . . . . . . . . . . . . . . . . . . . . . . . .$115,000 rubber, operational . . . . . . .$10,500/OFFER Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition . . . .. Cat 215BLC, 1985, 7'3" stick, 28" TBG pads, . . . . . . . . . . . . . . . . . . . . . . . . . . .$147,500 10 roller U/C . . . . . . . . . . . . . . . . . $31,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, Komatsu PC200 LC-6, 1996, 32" pads, 42" 26.5x25, A/C, P/S trans, working everyday on Bkt, long stick . . . . . . . . . . . . . . . . .$39,500 jobsites . . . . . . . . . . . . . . . . . . . . . .$87,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, Komatsu PC200 LC-6, 1996, 24" pads, 9'7" 26.5R25, A/C, P/S trans, 26 cy, working stick, 44" Bkt . . . . . . . . . . . . . . . . . .$43,500 everyday on jobsites . . . . . . . . . . . .$89,000 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 bkt, 27.6" TBG pads, work ready . .$57,000 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, (5) Komatsu PC128UU, 1996, offset boom, works everyday . . . . . . . . . . . . . . .$122,500 rubber tracks, low hrs . . . . . . . . . . . . .CALL CRAWLER TRACTORS Komatsu PC750 LC-6, 1999, 454 hp, 27” Cat D6H, 1987, Semi U blade w/tilt, ROPS, boom, 11’10” stick, 44’ DGB, aux plumbing, fair U/C . . . . . . . . . . . . . . . . . . . . . .$74,000 bucket choice, 24k ctwt . . . . . . . .$255,000 (2) Cat D6TXW, 2008, ROPS w/sweeps, aKomatsu PC400 LC-6LK, 1999, 10’6” stick, blade, winches, v. good . . . . .$175,000 Ea. Cat D8N, 1991, ROPS, drawbar, S-U blade .. JRB coupler, 31.5” TBG, ctwt removal, choice . . . . . . . . . . . . . . . . . . . . . . . . . . . .$85,000 of bkt . . . . . . . . . . . . . . . . . . . . . . .$77,500 (2) JD 450G, 1996, wide tracks, ROPS, PAT Komatsu PC400 LC-6LK, 11’1” stick, 35.5” blade . . . . . . . . . . . . . . . . . . . .$39,000 Ea. TBG, ctwt removal, choice of bkts, working everyday . . . . . . . . . . . . . . . . . . . . .$97,500 CRANES Broderson IC80-1B, 1984, 8.5 ton, Perkins Komatsu PC160 LC-7KA, 2004, 24” TBG dsl, OROPS, 20’ boom,, 3500hrs, good . . . .. pads, JRB coupler, plumbed, 8’6” width, nice, . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500 work ready . . . . . . . . . . . . . . . . . . . . . .CALL Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, Volvo EC460B LC, 2003, 4600 hrs, 23’ dual fuel, 10.00R15 tires, 3,400 hrs$21,500 Grove RT58C, 1981, down cab, 18 ton r.t., boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, 70' boom anti-two block, GM dsl, clean . . .. hammer/shear plumbing very good condition . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,500 . . . . . . . . . . . . . . . . . . . . . . . . . . .$159,000

TRUCKS & TRAILERS (2) 48' Box Vans w/Liftgates, Good Condition . . . . . . . . . . . . . . . . . . . . . . .CALL

AIR COMPRESSORS IR 185’s, JD diesels . . . . . . . . . . . . . .CALL SPECIALS Vermeer 5800 Trencher, 1997, 4 cyl dsl eng . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11,900 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow-type, (4) MH lights, excellent . . . . . . . . . . . . . . . . . . . . . . . . .From $5,200

BACKHOES Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt . . .$24,500

CRUSHING & CONVEYING Viper 301 Portable Screening Plant, 1997, dsl, 5'x7'. side & rear conveyors, T/A carrier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL DRILLS John Henry Drill Mtd on Cat 320N, 1994, 24' mast, Duraquip dust collection . . .$150,000 MISCELLANEOUS (2) Balderson Broom Attachment for Cat IT Machines, 8' wide, good condition . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Ea. ATTACHMENTS BUCKETS PC1000, 84" Digging Bucket . . . . . .$9,500 Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent . . . . . . . . . . . . . . .$4,000 (5) Cat 936/926/950 pallet forks, for a Balderson quick coupler, exc. cond . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . .$3,500 Ea. Others Available Call Prices Are Negotiable - At Your Inspection All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.

Page 10 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 11

View us at: www.amstate.com

PAVERS / ROAD WIDENERS CEDAR RAPIDS CR362L - ‘08 • Electric 8-16’ screed, Top Con Syst V, approx 1563 hrs ............................................................................................................$177,500 CEDAR RAPIDS CR662RM - ‘10 • Mat. Transfer Vehicle w/ Hopper Insert, 940 hrs ................................................................................................................$289,500 CEDAR RAPIDS CR662RM - ‘11 • Mat. Transfer Vehicle w/Hopper Insert, 427 Hrs ................................................................................................................$429,900 GILCREST PROPAV 8-13 - ‘00 • Conv Fed, 8’-13’ Track Paver, 2975 Hrs ..$14,500 MIDLAND SPR-6 - ‘11 • RH Discharge Widener to 6’, 277 Hrs ..................$95,000 MIDLAND SPR-6 - ‘11 • RH Discharge Widener to 6’, 45 Hrs ..................$105,500 MIDLAND SPD-8 - ‘11 • RH & LH Discharge Widener to 8’, 340 Hrs ......$145,000 CALL items may be on rent causing pricing and hours to vary.

MILLING MACHINES ROTEC RX400 - ‘11 • 48” Cut, 4 Track, Front Loading, Mill w/470 Hrs ....$349,500 WIRTGEN W50 - ‘11 • 20” Cut, 3 Wheel, Rear Discharge Mill w/150 Hrs ................ ................................................................................................................$164,700

ROLLERS Cat 214D - ’00, 48” Dbl Drm Vib, 4200 hrs ..............................................$10,500 Cat 214D - ’01, 48” Dbl Drm Vib, 4100 hrs ..............................................$10,900 SAKAI CR270 - 36", 3000lb, 4000VPM, vibratory, 217 hrs ..........................$9,800 SAKAI GW750 - ‘11 • Vibratory Pneumatic, 79’ Wide, 320 Hrs ................$109,900 SAKAI R2H-2 - ‘10 • 3 Wheel Static Roller, 83” Wide Coverage, 350PLI, 450 Hrs .. ..................................................................................................................$85,000 SAKAI SW320 - '07 • 47" Dbl Drm Vib w/foldable ROPS, 535 hrs..............$16,950 SAKAI SW800II - '09 • 67" Dbl Drm Vib, 1115 hrs ....................................$57,500 SAKAI SW800II - ‘11 • 67” Dbl Drm Vib, w/remaining standard and EPTW, 96 hrs ..................................................................................................................$95,000 SAKAI SW850-2 - ‘10 • 79” Dbl Drm Vib w/balance of Std warranty and EPTW, 541 hrs ......................................................................................................$87,500

EXCAVATORS GRADALL XL4100II - ‘04 • Trk Mtd. Exc. w/2 Buckets, 5925 Hrs ............$139,950

Contact Marty in Illinois 1-800-307-0221

mahrendt@finkbinerequipment.com Photos & Detail Descriptions view: www.finkbinerequipment.com

MANITOWOC 777 CRAWLER CRANE

GROVE RT760 ROUGH TERRAIN CRANE

YOUR AUTHORIZED DEALER

in WISCONSIN and UPPER MICHIGAN for: GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS • LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLER CRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/ JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAG CRUSHERS • MANITOWOC CRANES

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT PIONEER CS2148 PORTABLE JAW PLANT, 1997, 21x48 jaw, 50" x 20' vibratory feeder, 48" front discharge conveyor, Cummins diesel, quad axle chassis with hydraulic leveling......................................................................CALL PIONEER 6'X20' 10 DEGREE 3 DECK SCREEN PLANT, 1990, side discharge conveyor, underscreen conveyor, feed conveyor, tandem axle chassis ........................CALL JCI 1400 LS PORTABLE CONE PLANT, 1997, 300 hp electric motor, 48" side discharge conveyor, 42' feed conveyor, motor control panel, tri-axle chassis with hydraulic leveling......................................................................CALL EXCAVATORS DEMAG H95 MASS EXCAVATOR, Powered by a Cat 3408 Diesel, with a 24’7” Gooseneck Boom, and a 10’8” Stick with 43’6” Reach and 25’ Digging Depth, 7.2 cu yd HD Rock Bucket, Approx. 220,000 Lb. Working Weight, 5800 Frame Hours and Recent Engine Rebuild ............................................$125,000 LIEBHERR R974B HDSL UTILITY CRAWLER EXCAVATOR, Powered by a 471 HP Liebherr D9408TI Diesel, 33’11” Semi-Gooseneck Boom with 15’5” Stick, 5 cu yd HD Bkt, 21’x14’ 4” Wide U/C with 30” Track Pads adn Removable Sideframes, Approx. 190,000 Lb. Working Weight..................................................CALL

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

LIEBHERR R954C HD “LITRONIC” CRAWLER EXCAVATOR, (Several 2006-2007 Models Available) with Various Boom/Stick Combinations and Buckets Available, 326HP Liebherr D936L Six-Cyl. Tier 3 Diesels, Hydraulically Removable Counterweights, 124,000 to 130,000 Lb. Working Weights..........CALL CRANES GROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom, 32’ to 56’ Telescopic Offsettable Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work ....................................................................$179,900 GROVE RT875E 75 TON ROUGH TERRAIN CRANE, 2006, 41’ to 128’ boom, 33’ to 56’ bi-fold swingaway, Model 30 main & auxiliary hoists, 29.5 x 25 tires, 3position outriggers ............................................CALL MANITOWOC 777 SII 200 TON CRAWLER CRANE, 2000, Cummins, 220' main boom, 40' fixed jib, third drum, 7200 hours ..............................................CALL MANITOWOC 11000 100 TON CAPACITY CRAWLER CRANE, 2008, (100 Ton capacity @ a 14' radius), with a 332 hp Hino 6 cylinder Tier III diesel, 200' main boom, 60' jib, LMI, 36” crawler shoes, approximate working weight of 218,000 lbs. with 74,970 lb. 5piece counterweight, counterweight and side-frame removal systems. 3020 hours ............................CALL

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Lanny Peterson at:

lpeterson@amstate.com or mobile 1-715-574-8089 or 1-800-242-7113

Page 12 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

(L-R): Taking part in the ground breaking is Garrett Lyell, rental operations manager, Fabick CAT; Dave Burns, western region sales manager, Fabick CAT; Dave Modglin, used equipment/rental services manager, Fabick CAT; Bob Lambrecht, director of information systems, Fabick CAT; Joe Swayne, director of product support, Fabick CAT; Tom Held, paving products manager, Fabick CAT; David Dial, owner, Dial Architects; Mike Pospischil, general manager, Fabick CAT; Doug Fabick, president, Fabick CAT; John Fabick IV, vice president, Fabick CAT; Harry Fabick, chairman, Fabick CAT; Dennis Hancock, mayor of Fenton; Bob Gorman, CORE Group, industrial account manager, Central Region, Caterpillar, Inc.; Dave Kramer, CFO, Fabick CAT; Chris Burns, sales manager, Fabick CAT; Mary Kuhn, industry field supervisor, Caterpillar Inc.; Kimberly Gerdes, director of human resources, Fabick CAT; Jeannie Braun, executive director, Fenton Area Chamber of Commerce; Dale Roethmeyer, president, Fenton Area Chamber of Commerce; Steve Snow, facilities manager, Fabick CAT; Mike Eveler, project manager, Kadean Construction Company; and Benj Meyer, coordinator, Kadean Construction Company.

Fabick CAT Celebrates Groundbreaking in Fenton Officials of Fabick CAT held a groundbreaking ceremony May 7 to signal the start of construction on a new 16,000 sq. ft. Customer Engagement Center in Fenton, Mo. “When finished, the new Customer Engagement Center will have seven to ten corporate offices, a conference room, a balcony, the new merchandise store, a condition monitoring area, the machine oil testing lab, and the new Fabick TV production room,” said General Manager Mike Pospischil. “This new facility will allow us to ever serve our customers better, a firm belief started by John Fabick Sr. from the very beginning. We want to showcase Fabick CAT, build new relationships, and exceed our customers’ expectations.” All facets of Fabick’s business will be conducted in the new addition. It will be a “one-stop-shop” for new and existing customers. This project is expected to be completed by late fall 2012. “Upstairs there is a conference room that we will use to train employees to think like our customers, to take a walk in their shoes. We do this to help us understand their everchanging needs in the marketplace,” Pospischil said. “The conference area will be open to customers, construction businesses, landscaping businesses, and associations.

We strive to treat our customers one way and that's first class. “This is a place we’re going to be proud of, customers will be proud of, and Fenton is going to be proud of.” The Chamber of Commerce welcomes the addition and believes that this will bring great things to Fenton’s community and trade industries. “On behalf of the 445 members of the Fenton Area Chamber of Commerce, I am excited to celebrate Fabick’s expansion and addition of the new Customer Service Center,” said Jeannie Braun, executive director of the Chamber of Commerce. “This construction is a welcome sight for the community as a great start in revitalizing the I-44 corridor. Fabick CAT has been an outstanding supporter of the Chamber for over 40 years as well as a considerable asset to the whole community. “Their success is our success.” “Our mission is to support the communities in which we work and live. We will deliver innovative solutions that provide exceptional value to our new and existing customers,” said Pospischil. “We genuinely care about our customers and their needs. That’s what this Customer Engagement Center is all about, exceeding the customer’s expectations every time they need us.”

Fabick CAT General Manager Mike Pospischil welcomes everyone to the ground breaking ceremony.

Fabick CAT President Doug Fabick thanks everyone for attending the ground breaking ceremony and reflects on the history of the John Fabick Tractor Co. as well as the future of the company.

Fenton Area Chamber of Commerce Executive Director Jeannie Braun speaks of the commitment that Fabick CAT has made to the Fenton area.

Fenton Mayor Dennis Hancock congratulates Fabick CAT on its expansion.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 13

(262) 781-3770 Jim King Mobile: (414) 530-0592 13001 W. Silver Spring Drive Butler, WI 53007

2010 VOLVO L110F, Cab, A/C, Radio w/CD, Heated Air Susp. Seat, Boom Susp, 3rd Function, Hyd. Att. Bracket, Rev. Cooling Fan, Add’l. Work Lights, Block Heater, Care Track, Scale, 4.4 Cy. H/O STE Bkt, w/BOE, 23.5R25 Tires

WHEEL LOADERS 2004 VOLVO L60E, Cab, A/C, Contronics, Work Lights, Hyd. Attachment Bracket, 2.2 Cu. Yd. Bkt w/BOE, 20.5R25 Tires ....$72,500 2002 VOLVO L70D, Cab, Heater, Contronics, Work Lights, Hyd. Attachment Bracket, Front Differential Lock, 2.5 Cu. Yd. Bkt w/BOE, 20.5-25 Tires ....................................$58,000 2002 VOLVO L70D, Cab, Heater, Contronics, Air Susp. Seat, Work Lights, Boom Susp., Hyd. Attachment Bracket, Limited Slip Rear Differential, 2.5 Cu. Yd. Bkt w/BOE ................ ..........................................................$82,500 2003 VOLVO L70D, Cab, Heater, Contronics, Air Susp. Seat, Work Lights, Boom Susp., Hyd. Attachment Bracket, Limited Slip Differential, 2.5 Cu. Yd. Bkt w/BOE, 20.5-25 .. ..........................................................$87,500 2005 VOLVO L70E, Cab, A/C, Contronics, Work Lights, Hyd. Attachment Bracket, Front Differential Lock, 2.9 Cu. Yd. Bkt. w/BOE, 20.5R25 Tires ..................................$189,000 2006 VOLVO L70E, Cab, A/C, Contronics, Work Lights, Hyd. Attachment Bracket, Front Differential Lock, 2.9 Cu. Yd. Bkt. w/BOE, 20.5R25 Tires ....................................$79,000 2003 VOLVO L90E, Cab, A/C, Contronics, Work Lights, 3rd Function, Hyd. Attachment Bracket, Front Differential Lock, 3.5 Cu. Yd. Bkt w/BOE, 20.5-25 Tires ..................$92,000 2009 VOLVO L90F, Cab, A/C, Radio w/CD, Boom Susp., Caretrack, Hyd. Attachment Bracket, 3.5 Cu. Yd. Bkt, 20.5R25 Tires.......... ........................................................$165,000

SEE PHOTOS

OF OUR

Fax: (262) 781-5053 Email: jking@aring.com

COMPLETE INVENTORY

AT WWW.ARINGEQUIPMENT.COM

2009 VOLVO L220F, Cab, A/C, Radio w/CD, Boom Susp, CDC, Addit’l. Hyd. Oil Cooler Block Heater, Caretrack, 7.4 cy Bkt, 29.5R25 Tires

2008 VOLVO EC160C LC, A/C, 28” Pads, 9’10” Stick, Q/C Piping, Hammer/ Shear Piping, Pilor Pattern Control Change, Block Heater

(15) 2001-2008 VOLVO A40D/E’S, A/C, Contronice, 29.5R25 Tires

2011 VOLVO L90F, Cab, A/C, Radio w/CD, Rear Camera w/Color LCD Monitor, Heated Seat, Boom, Suspension, 3rd Function, Hyd Attachment Bracket, Work Lights Front & Rear, Reversible Cooling Fan, Engine Block Heater, Rotating Beacon, Care Track, 104” 3.5cy Bkt, w/BOE, 20.5R25 Bridgestone VJT L-3 Tires ..........................................$177,000 2009 VOLVO L120F, Cab, A/C, Radio w/CD, Work Lights, Boom Suspension, Reversible Cooling Fan, Hyd Attachment Bracket, 4.4 CY Bkt, w/BOE, 23.5R25 Tires ..................$CALL 2006 VOLVO L150E, Cab, A/C, radio w/CD, Work Lights, Boom Susp., Return to Dig, 5.25 CY Bkt w/BOE, 26.5R25 Tires ......$CALL 2005 VOLVO L220E, Cab, A/C, Radio, Additional Work Lights, Return to Dig, Boom Susp, 7 Cu Yd. Bkt w/BOE, 29.5R25 Tires ...... ........................................................$135,000 1996 VOLVO L330C, Cab, A/C, Contronics, Boom Susp, 9 Cu. Yd. Spade Nose Bkt w/Teeth, 35/65R33 ............................$57,500 2001 VOLVO L330D, Cab, A/C, Boom Susp., Comfort Drive Cont, 9.6cy Spade Nose Bkt, w/Teeth, 35/65R33 Tires..................$137,000 1998 KOMATSU WB70, Cab, Heater, Front/Rear Work Lights, Hyd QC, Log Bkt w/Teeth, 15/70-18 Bridgestone Tires, C&P .... ..........................................................$23,000

2008 VOLVO EC160CLC, A/C, 28” Pads, 9’10” Stick, Aux. Hyd, Q/C Piping, Rotator Piping, Pilot Pattern Cont. Changer, Block Heater ...... ........................................................$115,000 2003 VOLVO EC210BLC, A/C, Radio, 32” Pads, 9’6” Stick, Hammer/Shear Piping, Geith Pin Grabber, 48” Bkt ..........................$56,500 2005 VOLVO EC210BLC, A/C, Radio, 32” Pads, 9’6” ARM, Hammer/Shear Piping, QC Piping, Heavy CW, Pilot Pattern Cont. Change, Block and Oil Pan Heater, Geith Pin Grabber, 30” Bkt ..............................................$77,500 2010 VOLVO EC210C LC, A/C, Radio w/CD, 32” Pads, 11’6” Stick, Hammer / Shear Piping, QC Piping, Pilor Pattern Cont. Change, Block Heater, Rear camer w/Color LCD Monitor ............................................$154,000 2009 VOLVO ECR235CL, A/C, Radio w/CD, 32” Pads, 9’6” Stick, Hammer / Shear Piping, Q/C Piping, Pilot Pattern Cont. Change, Block Heater ..................................................$CALL 2004 VOLVO EC240B LC, A/C, Radio, 36” Pads, 9’9” Stick, Hammer / Shear Piping, QC Piping, Pilot Pattern Cont. Change, Block Heater, Wain Roy Twist QC, Rockwell Hyd. Thumb, 72” Ditching Bkt, 42” GP Bkt ............ ..........................................................$95,000 2007 VOLVO EC240BLC, A/C, 36” Pads, 9’9” Stick, Aux. Hyd, Q/C Piping, Rotator Piping, Pilor Pattern Cont. Changer, Block Heater ...... ........................................................$119,000 2007 VOLVO EC290BLC, A/C, 36” Pads, 13’1” Stick, Aux. Hyd, Q/C, Piping, Rotator Piping, Pilot Pattern Cont. Changer, Block Heater ...... ........................................................$137,500

2008 VOLVO EC290CLC, A/C, 36” Pads, 12’2” Stick, Aux. Hyd. Q/C Piping, Rotator Piping, Pilot Pattern Cont. Changer, Block Heater ...... ........................................................$157,000 2003 VOLVO EC360BLC, A/C, Radio, 36” Pads, 60% U/C, 12’13” Stick, Pilot Pattern Cont. Change ..................................$112,000 2005 VOLVO EC360BLC, A/C 36” Pads, 12’10” Stik, Hammer/Shear Piping, Q/C Piping, S-3 Coupler, Pilot Pattern Cont. Change, Block & Oil Pan Heater ......$135,000 2006 VOLVO EC360BLC, 36” Pads, 12’10” Stick, Q/C Piping, Hammer/Shear Piping, Pilot Pattern Cont. Change, Walk Way, Block Heater ..............................................$137,500 2009 VOLVO EC360C LC, A/C, Radio w/CD, 36” Pads, 12’10” Stick, Hammer / Shear Piping, Q/C Piping, Slope / Rotator Piping, Pilot Pattern Cont. Change, Block Heater ........ ............................................................$CALL 2003 VOLVO EC460BLC, A/C, Radio, 36” PADS, 15’9” Stick, Hammer/Shear Piping, Pilot Pattern Cont. Change, HYD CWT Removal................................................$CALL 2003 CATERPILLAR 321C LCR, A/C, Work Lights, 32” Pads, 60% U/C, 9’6” Stick, Hyd Q/C, 30” Bkt ......................................$67,500 2005 CATERPILLAR 345BL, A/C, Radio, Work Lights, 36” Pads, Reach Boom, 12’10” Stick, Hyd Pin Grabber, 54” GP Bkt, Municipal Trade ........................................................$119,000 2006 DEERE 35D, OROPS, Work Lights, 12” Rubber Pads, Offset Boom, Hyd. Thumb, Leveling Blade, Q/C, 16”/24”/36” Bkts$25,000

EXCAVATORS 2009 VOLVO ECR145CL, A/C, Radio w/CD, 24” Pads, 8’2” Stick, Hammer / Shear Piping, Q/C Piping, Pilor Pattern Cont. Changer ........ ............................................................$CALL

WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL DENNY KREUSER (608) 386-8480 FOR MORE INFO.

Page 14 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

TRYME FEELTHEDIFFERENCE

MODEL BF 90.3 RECOMMENDED EXCAVATOR 20 Ton.

COMPANY CERTIFICATION UNI EN ISO 14001:2004 IN PROGRESS

w w w. m b a m e r i c a . co m

GET CONQUERED BY THE CRUSHING POWER OF MB, THE CRUSHER BUCKET SUITABLE FOR ALL EXCAVATORS. TRY IT: YOU WON’T BE ABLE TO DO WITHOUT IT ANYMORE

MB America Inc - Toll free: 855 MB CRUSH (855 622 7874) - info#mbamerica.com

March Construction Employment Dips By Timothy Doucette 7,000 But Rises 1 Percent From a Year Ago Promoted to GM — The construction industry lost 7,000 jobs between February and March, following a similar decline of 6,000 the month before, but extended a pattern of modest year-over-year job increases, according to an analysis of new federal employment data released by the Associated General Contractors of America. Association officials said that lack of long-term federal highway and transit funding threatens to hold down future job gains. “Both the small monthly change and the March-to-March gain of 55,000 jobs or 1 percent are consistent with the uneven, tentative recovery that contractors have been reporting nationwide,” said Ken Simonson, the association’s chief economist. He noted that March was the seventh consecutive month that construction employment had risen from the same month a year earlier. “Meanwhile, the industry’s unemployment rate has been dropping faster than the pickup in construction jobs, implying that work-

ers are leaving the industry, which could cause problems later,” he said. “Multifamily, manufacturing, distribution and energy-related construction are booming,” Simonson observed. “In addition, private hospital and university work are starting to improve, but public construction is declining, while single-family homebuilding, office and retail work are largely limited to remodeling jobs.” Simonson stated the construction unemployment rate in March was 17.2 percent, or roughly double the national unemployment rate, although the industry rate had improved from 20 percent in March 2011 and 24.9 percent in March 2010. “In the past two years, the industry’s unemployment ranks have dropped by more than 800,000,” he said. “That is good news for those who have found jobs, but unfortunately construction firms have not hired most of them. Construction employed the same number of workers — 5.55 million — in

March 2012 as it did in March 2010. That means construction workers are leaving the industry, either for other jobs or to retire, and contractors may have trouble finding experienced workers in the future.” Association officials said the pickup in construction jobs is likely to remain anemic and unbalanced unless there is adequate funding for long-term infrastructure programs. They cited the continuing lack of action on a multiyear federal highway and transit bill as a particular problem. “Just when contractors should be adding workers and getting an early start on the spring construction season, Congress has again left town leaving highway funding on another shortterm extension,” said Stephen E. Sandherr, the association’s chief executive officer. “When lawmakers return this month, they should follow through on a bill with enough funding to enable contractors and state agencies to make longer-run plans.”

Brand Strategy Duane Wilder, president of Liebherr Construction Equipment Co., announced that Timothy Doucette has been promoted to the newly created position of general manager — brand strategy. In this new role, he will work closely with the president, to ensure all aspects involving the brand are coordinated to increase Liebherr’s market presence in the United States as a manufacturer of premium quality, heavy duty construction equipment. Reporting to Doucette will be the marketing and public relations departments, sales administration and the earthmoving product group. Doucette also will retain his current role as part of the dealer selection committee. “Tim has played a key role in our growth over the past several years and this newly created position provides the opportunity for him to assume an increased leadership role as we continue to grow the Liebherr brand in the USA,” Wilder said. For more information, call 757/245-5251 or visit www.Liebherr.us.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 15

USED EQUIPMENT 2005 CAT 950G SERIES II

2008 CAT D6K LGP

2000 CAT PS360

2007 CAT 924G

S/N AXX01814, 5,620 Hrs, AC, Ride Control, 4.25 CYD GP ....................$165,000

S/N DHA00679, 2492 Hrs, AC, 4th Valve, Accugrade Ready ........................$129,500

S/N 9LS00183, 2427 Hrs, 2 Speed Trans, Variable Forward/Reverse ............$83,000

s/n RTA00851, cab, a/c, 2.3 yd bucket, Tier ll engine ........................................$108,500

2008 CAT 315DL

1994 CAT 928F

2007 CAT 320CL

2007 CAT 320DL

S/N CJN00360, 2,317 Hrs, 10’2” Stick, 24” pads ..............................................$133,500

S/N 2XL00486, 4517 Orig. Hrs, GP Bkt, Cleaned/Painted, Good Operating Condition ........................................$62,000

S/N PAB07035, 2300 Hrs, quick coupler, mechanical thumb, 42” bucket ..$127,500

S/N PHX350, 3,003 Hrs, aux hyds, coupler, 48” bucket ............................$160,000

2006 CAT 315CL

2004 CAT 980G II

2009 CAT IT38H

2007 CAT 980H

S/N CJC3818 3,405 hrs, aux hyds, 36” bkt, 24” pads ..........................................$95,000

S/N AXG01090, 8619 Hrs, AC, Ride Control, Good Tires, GP Bkt........$225,000

s/n JNJ00375, 3350 Hrs, AC, Ride Control, 4th Valve, 3.25CYD GP Bkt..........$177,500

S/N JMS02662, 8,098 Hrs, AC, Ride Control, 8.0 CYD GP ....................$295,000

2004 CAT 950G ll

2004 CAT IT28G

2003 CAT 420D

2010 MORBARK 4600XL

S/N BAA631, 3,978 Hrs, ride control, ac, 3.75 gp bkt ....................................$170,000

S/N DBT1579, 3,793 Hrs, ac, ride control, 3rd valve, bkt, forks ....................$101,500

s/n FDP09264, 5108 Hrs, Cab, E-Stick, Awd Hydrs, Ride Control, 30” Bkt, New Front Tires ......................................$45,000

400 Hrs, Cat C27 Engine, Auto Reversing Fan, Magnetic End Pully..............$575,000

Rod Byers 636-680-1579 rod.byers@fabickcat.com

1 Fabick Drive, Fenton, MO 63026 www.fabickcat.com “To Ever Serve Our Customers Better”

Bob Miller 636-680-1594 bob.miller@fabickcat.com

Page 16 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Seminars, Expo Highlight Successful IAAP Convention

(L-R): Paul Schratz of Roland Machinery Co. welcomes Roger Martinez of Ritchie Bros. Auctioneers, Gerald Nagel of Hanson Material Service and Nick Pacino of Ritchie Bros. Auctioneers to the Roland Machinery Co. booth.

Kelly Barr (L) and Brian Benck (third from L) of West Side Tractor Sales Co. welcome Mark Rager and Meghan Ross of William Charles Construction to the West Side Tractor Sales Co. booth.

(L-R): Randi Wille of Meyer Material Co., Glenda Schoening of IAAP and Brian Rice of Hanson Material Service welcome attendees to the 44th annual convention.

he Illinois Association of Aggregate Producers held its 44th annual convention May 15 at the Crowne Plaza in Springfield. The all-day event was filled with Jeremy Curran (L) and Jack Shecterle of American Bin informative seminars and the expo gave members a chance IAAP President Anne Cramer welcomes everyone to the & Conveyor are ready to greet attendees. 2012 convention. to network. see CONVENTION page 32

IAAP Outreach Manager Shawn McKinney presents the IAAP Rock Solid safety awards winners.

(L-R): Mike Bernardi of Hanson Material Service, Scott Letzter and Terry Murphy of Meyer Material Company share some thoughts on the aggregate industry.

(L-R): Terry Macklin and Don Gregorius of American State Equipment Co. and Mandy Moore of Inertia take a break from the convention to pose for a picture.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 17

815-968-0818

CONTACT Evenings: Bill 815-262-9134 or Fred 815-975-1419

CAT 312CL 0.98-YARD HYDRAULIC EXCAVATOR, 90 HP, Cab w/ Heat & AC, 9'10" Stick, 32" Bucket w/ Teeth, Good UC w/24" Pads................ ............................................................$68,500

CAT 320CL 1.83-YARD HYDRAULIC EXCAVATOR, 128 HP, Cab w/ Heat & AC, 9'6" Stick, 44" Bucket w/ Teeth, Aux Hyd, VG UC w/ 31.5" Pads ..........................................................$115,000

2012 WITZCO CHALLENGER RG-50, 50-Ton TriAxle Detachable Ground Bearing Lowboy, 24’ CAT D8N HYDRAULIC SU DOZER W/TILT, 285 Loadwell, Outriggers, Self-contained, Spring HP, Canopy, Powershift, Differential Steer, Suspension, LowPro Tires, Budd Wheels, $ Drawbar, Good U/C w/26” Pads ..........$92,500 Included FET ............2 In Stock $38,266 Each

CASE 580 SUPER M 4X4 1-YARD LOADER BACKHOE, 73 HP, Canopy, GP Front Bucket w/Bolton Edge, 36” Hoe Bucket w/Teeth, Good Tires.. ............................................................$37,500

CAT 963 LGP 3 YARD CRAWLER LOADER, 150 HP, Canopy, Hydrostatic Transmission, GP Bkt w/Teeth & Inserts, Good U/C w/22” Pads ........ ............................................................$32,500

CAT 950G 4.5-YARD ARTICULATED 4WD LOADER, 180 HP, Cab w/ Heat, ECPC HITACHI EX300LC-2 2-YARD HYDRAULIC Transmission, GP Bucket, Good Tires .............. EXCAVATOR, 208 HP, Cab w/Heat, 10'6" Stick, ............................................................$78,500 39" Bkt w/Teeth, Good UC w/32" Pads $38,500

CAT D3G XL HYDRAULIC 6-WAY DOZER, 77 HYSTER TRIPLE DRUM TOW BEHIND WEDGE- HP, Canopy, Hydrostatic Transmission, Joystick CAT D4H XL SERIES III HYDRAULIC 6-WAY CAT 267B CRAWLER SKID STEER, 71 HP, FOOT COMPACTOR, Drums Measure 32" wide Controls, Very Good Undercarriage w/16" Pads DOZER, 105 HP, Canopy, Powershift, Lever Canopy, Hydrostatic Drive, Aux Hydraulics, GP x 52" Diameter ......................................$5,650 ............................................................$37,500 Steer, Drawbar, VG U/C w/22” Pads ....$36,000 Bkt, New 18” Rubber Tracks ..............$25,500

CAT D6H DS XL HYDRAULIC SU DOZER CAT D5G XL HYDRAULIC 6-WAY DOZER, 90 CAT D8R HYDRAULIC SU DOZER W/TILT, 305 W/TILT, 175 HP, NEW Cab w/Heat & AC, HP, Canopy, Heater, Hydrostatic Drive, Joystick HP, Cab w/Heat & AC, Powershift, Differential Powershift, Differential Steering, Drawbar, VG Controls, Good UC w/ 20" Pads ..........$39,500 Steer, VG UC w/ 26" Pads ................$132,000 U/C w/24” Pads ..................................$68,500

CAT D6M XL HYDRAULIC 6-WAY DOZER, 140 HP, Cab/Heat & AC, Fingertip Control Powershift & Steering, Drawbar, Good UC w/22” Pads..........................................$62,500

For our full inventory, please visit www.adamsequipment.com

Page 18 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Paving & Compaction Rental Specials

@ ROLAND MACHINERY

HD+ 120 VO

SUPER 700

GRW 280

Tandem roller with oscillation and vibration

Tracked Paver

Pneumatic rubber tired roller

• • • • • •

• • • • •

• Ergonomic operator’s compartment with access from either the left or right side • A full 180° rotating operator’s station with swiveling seat and tilt steering wheel • Excellent visibility to the drum surfaces, drum edges and work areas • 6.7” drum offset to either left or right side • Individually controlable oscillating drum and vibrating drum in a single machine • Hydrostatic dual drum drive, infinitely variable • High performance, turbo-charged diesel engine that meets all current EPA emission requirements • Dual pump water system with all spray nozzles clearly visible from the operator’s seat • Electronic engine management system and adjustable, automatic speed control

Track gauge 3 ft. 7 in. Clearance width just 3 ft. 11 in. Paving widths from 20 in. to 10 ft. 6 in. Laydown rate up to 280 tons/h. Paving speed up to 200 fpm. Powerful and economical DEUTZ engine rated at 60 h.p., with ECO mode. • Combines with AB 200 Extending Screed in V version (vibration). • Asymmetrical material hopper.

• • • •

Large operator’s platform Sliding and rotating operator’s seat Transport height less than 10’ Two point steering, high stability Equal weight distribution front to back, side to side Simplified ballasting options Outstanding all around visibility, view of tire edges Self-explanatory instrument panel Easy access for servicing and maintenance

Weekly and Monthly Rentals Available

Call Roland Machinery Co. for rates and availability DePere, WI 920/532-0165 920/532-0526 Deforest, WI 608/842-4151

Franksville, WI 262/835-2710 Schofield, WI 715/355-9898 Eau Claire, WI 715/874-5400

Escanaba, MI 906/786-6920 Springfield, IL 217/789-7711 Marengo, IL 815/923-4966

Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 Bridgeton, MO 314/291-1330

Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083

Palmyra, MO 573/769-2056 Portage, IN 219/764-8080

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 19

LIKE NEW LOADERS AT LESS THAN HALF THE PRICE!!! $78,000 JD 644E tool carrier tractors, Complete factory remanufacture in 2001, Marine Corps contract. Everything was gone through (engines, axles, transmissions, pivots, etc) at that time and the units have very low hours since the remanufacture process. Erb is putting on new paint, new air conditioning units, new 4 yd buckets. Units vary in hours and pricing. Pricing for a unit with less than 2500 hrs, with new paint, air conditioning, hydraulic quick coupler, new bucket and good rubber. $78,000

Fiat 65E, 110HP, Blade Bomag BW205, 84" Pitch, 252 Hrs, #A7104 Drum, #A5331 .............. ........................$110,000 ........................$32,000

JD 310SG, #N4288, JD 9520 Scraper Bomag BW180AD, 71" Tractor, #U10748.......... Cab, Air, Aux Hyd .......... Drum, #A4597 .............. ........................$118,000 ........................$52,000 ........................$38,000

JD 800CLC, 14' 5" Arm, JD 600CLC, 13' 5" Arm, 36" Pads, #N4385 ........ 36" Pads, #U10798 ...... ......................$450,000 ......................$200,000

NPK Hammers, All Sizes for All Makes. Inspected and Well Maintained, GH4-GH18

JD 80C w/ Genesis JD 1050C, Waste GVP7, #N4456 .............. Package, 165" Blade, ......................$100,000 #N4010 ..........$195,000

ERB EQUIPMENT CO., INC. Sales, Rental, Parts & Services Of: John Deere, Bomag, NPK & Trail King

Call Industrial Sales At (636) 349-0200 Toll Free (866) 372-7368 Email: Mattheisel@erbequipment.com

VIEW COMPLETE INVENTORY (OVER 300 UNITS)

8 Locations To Serve You Fenton, MO Wentzville, MO

Mt. Vernon, IL Cape Girardeau, MO

Paducah, KY Cuba, MO

Owensboro, KY Evansville, IN

Page 20 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

llu.net www.a

scan for video

ALLU D-SERIES

Screener Crushers & Fine Screeners ALLU provides portable screening and crushing attachments that will crush, mix, stabilize, aerate and screen for pipelines, topsoil, compost, construction debris, contaminated soils, asphalt, mulch, salt, coal, sand, gravel, sludge, garbage, bio-waste, food waste, leaf mulch, glass, gypsum, pallets, lime & much more!

• Available to fit • High production even with wet muddy materials • 5/8” & 1” Fine screening size • 1-1/4” and up sizes with replaceable hammers

ALLU Group, Inc. | Info Call: 1-800-939-2558 | Email: usa@allu.net

Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER

KOMATSU D65EX-15

Made in the USA

Tough economic times call for a preventive approach to equipment maintenance. Extend your maintenance budget and the life of your cylinders with the SEAL SAVER protective cylinder cover. Resistant to heat, oil, chemicals and water, the SEAL SAVER will help protect seals and cylinder rods from premature failure. This unique preventive maintenance tool attaches easily and securely to the rod and cylinder head – usually in fifteen minutes or less – with no disassembly of the cylinder required.

The SEAL SAVER WILL: Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling and Wood Products industries. Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 • Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

www.sealsaver.com

Visit for more information or contact us at 1-800-683-5189

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ May 26, 2012 â&#x20AC;˘ Page 21

)8// 32:(5(' ),1$1&,1*

5LJKW QRZ ZHĹ¤UH RIIHULQJ FXVWRPHUV LQWHUHVW IRU WKUHH \HDUV RQ DOO QHZ . 6HULHV %DFNKRHV DQG VHOHFW . 6HULHV &UDZOHU 'R]HUV Youâ&#x20AC;&#x2122;ll not only save â&#x20AC;&#x201D; youâ&#x20AC;&#x2122;ll be more productive than ever. Our new versatile backhoes minimize maintenance costs. And our customer-inspired dozers off ffeer exceptional controllability on and off slopes. Check them out now at your local Nortrax. With a 0% interest rate,* youâ&#x20AC;&#x2122;ve got nothing to lose. Off ffeer ends June 30, 2012.

NOW OPEN!

$35 )25 0217+6

2 25 5

$35 )25 0217+6

Mosinee, WI 715.693.3820 Located at 1425 Oâ&#x20AC;&#x2122;Keeffe Drive (Exit #181 off Hwy. 51/39) 51/

Ashland, WI 715.682.5522

Duluth, MN 218.722.7456

Grand Rapids, MN 218.326.9427

Chippewa Falls, WI 715.834.2924

Bemidji, MN 218.759.1996

Escanaba, MI 906.789.9054

Monico, WI 715.487.5583

*Subject to approved credit from John Deere Financial and with dealer participation. Program subject to change without notice at any time. Off ffeer valid on 550K, 650K, and 700K Dozers, and all new K-Series Backhoes. Now through June 30, 2012. To find out more, check out the program details at www.JohnDeere.com/nothing.

$35 )25 0217+6

Page 22 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The staff of Titan Machinery – Shakopee gathered for a group photo during the open house activities.

Titan Machinery Shakopee Holds Open House Event

itan Machinery – Shakopee held an open house April 20. The day highlighted equipment from Case, JLG, Wacker Neuson, Sidump’R, Leica Geosystems and Towmaster Trailers. In addition to equipment and parts specialists, attendees were also treated to a free lunch.

On hand for the open house is Sidump’R Trailers General Manager Jennifer Koepke of Plainview, Neb., who is happy to talk about her company with C. Schmitz of CMS Enterprises, Rosemount, Minn.

(L-R): The Towmaster Trailers’ crew of Sales Manager Chris Pokornowski, Government Account Manager Andy Bethel, Regional Sales Manager Bob Pace and Inside Sales Representative Anna Johnson gather around the popular T-14D14 Towmaster dump trailer for a picture.

Rice County, Minn., Highway Department Heavy Equipment Operator Kevin Brazil likes the features on this Case TV380 with the Leica Powergrade System and CE Edge Grade.

Orangey Lawerence (L) of River Valley Trucking, Henderson, Minn., and good friend Steve Buesgens of Buesgens Trucking & Parrott Contracting, also from Henderson, check out this Case SR 250 skid steer.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 23

Because the only pit you should be in is the one you’re digging.

If there’s one thing more hardworking and reliable than Rudd’s equipment, it’s Rudd’s service and maintenance. Rudd’s freight system and 13 service branches across nine states, together with our award-winning master technicians, mean we can deliver replacement parts, equipment and service to your site by the next morning. It’s that kind of 24/7 service that proves how committed Rudd is to going the distance for you. WWW.RUDDEQUIPMENT.COM

Indianapolis, IN Fort Wayne, IN Evansville, IN Pittsburgh, PA

317-247-9125 260-482-3681 812-867-6661 412-741-1731

CALL: 1-877-DIG-RUDD

Clearfield, PA Louisville, KY Corbin, KY

814-765-8500 502-456-4050 606-528-9440

Prestonsburg, KY 606-874-2104 St. Louis, MO 314-487-8925 Charleston, WV 304-755-7788

Cleveland, OH Columbus, OH Cincinnati, OH

614-438-4192 614-438-4192 513-321-7833

Page 24 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

563-872-4112

'8%848( %(//(98( ,2:$

::: --6&+(&.(/ &20

CUSTOM REBUILD DIVISION TOP QUALITY, non-union, independent EMPLOYEES that care deeply for our customers, working in a TOP QUALITY FACILITY in Iowa, equals TOP QUALITY EFFICIENCY! &203/(7( 0$&+,1( Custom Rebuilds, Remans & Repowers ,1',9,'8$/ &20321(17 Rebuilds & Repairs 2(0 35,9$7( /$%(/ Contract Remanufacturing, Rebuilding & Mechanical Service

Please contact Josh Scheckel for any of your service requirements, call 563-872-4112, or email JOSH@JJSCHECKEL.COM

CAT D10R REMAN

(2) CAT D9R REMANS

CAT D10R REMAN

(48,30(17 5(17$/ $1' 6$/(6 ',9,6,21

SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industy acclaimed • 100% Made in USA For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

CAT D11R REMAN

2005 DEERE 700J LGP Orops, 2,400 hours... $78,000 Transport and Financing available. 75$&. 7<3( 75$&7256 97/2012 CAT D11R, D10R, D9R Remans........CALL!! 2002 DEERE 700H LGP Erops, 7,800 hours...$59,000 Detailed pictures/descriptions at ::: --6&+(&.(/ &20 2002 CAT D11R Coming In...............................CALL!! &203$&7,21 ',57 35(3 1996 CAT D10R Cab, A/C, Su Blade.................. CALL!! (9) 48” & 60” SHEEPSFOOT............ $4,500-$18,500 2006 CAT D9T Full Specs, New UC.............. $445,000 (2) 2009 HOLMES ROLLERBLADES........$19,000 EA (2) 2001/02 CAT D9R’S New UC........ $235-255,000 2005 ROME TACW-12 OFFSET DISK............$19,000 (3) 1985 CAT D8L’S Good machines!....... $88,000 EA 27+(5 (48,30(17 (2) 2005 CAT D6N LGP’S Erops, 7k hrs..$135,000 EA 2005 CAT D6N XL Erops, 7,200 hrs............. $130,000 2005 CAT 988F Well maintained, Records.... $95,000 2004 CAT D6N XL Erops, New UC, 7k hrs.... $130,000 2007 CAT 320DL Low Hours!...................... $139,000 (2) 1997/98 CAT D6M LGP’S Orops........ $65,000 EA 2006 CAT TH580B TELEHANDLER.............. $56,000 1997 CAT D6R XL Orops, 12,000 hours........$115,000 2006 CAT TH460B TELEHANDLER.............. $45,000 1990 CAT D6H 3ZF Series, 8,000 hours......... $79,000 1981 JD 540B CABLE SKIDDER................... $19,000 1996 CAT D6H XL Laser System Installed..... $70,000 (2) 2005 NOBLE 417B SCRAPERS......... $35,000 EA 2005 CAT D5N LGP Orops, 7,000 hours........ $68,000 (4) 2007 MISKIN DW25’S...................... $75,000 EA (3) 1985 CAT D8L’S 1999 CAT D5M LGP Orops, 6,300 hours........$64,000 ATTACHMENTS, RIPPERS, BLADES............... CALL!! $88,000 EACH For equipment rental and sales call 563-872-4112, or email SALES@JJSCHECKEL.COM

Stephen Passy & Associates, Inc.

Exclusive Sales Managers 175 W. Central Ave., San Bernardino, CA 92408 424-204-9760 Fax: 310-276-1761

Contact Stephen Passy 310-927-3493 s.passy@sbcglobal.net Liz Blackburn 909-963-6503 liz.b@passyauctions.com

LEASE TERMINATION ORDERED SOLD BY SECURED PARTY FOR IMMEDIATE SALE – CALL FOR PRICING & LOCATION 2011 Models

2011 Model

Site Prep Machines/Mulchers (3) 2011 Prentice 2864 w/ Fecon Mulching Head, Hours: 1,433, 1,183 & 1,424 2011 Barko 930 w/Fecon Mulching Head, Hours: 1,329

SOLD

Horizontal Track Grinder 2011 Peterson 4710B w/CAT C-18 Power, Hours: 971 Forklifts (2) 2005 & 2000 Hyster H155XL2 15,500lb., Hours: 4,208 & 2,652 2005 Hyster H80XM 8,000lb., Hours: 8,644

Loader Backhoe / Skip Loader 2006 Terex 760B, Hours: 2,300 John Deere 210LE Skip w/Drag Box Mini Excavators 2006 Terex HR 16, Hours: 800 2006 Terex HR 1.6, Hours: 400 Other Equipment 2005 GMC 7500 Flatbed Dump Truck 2000 Tennant “ Big Mac” 830 Series II Mobil Sweeper 1994 CASE IH 9250

Visit www.passyauctions.com for Full Inventory

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 25

Page 26 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 27

Mid Country Machinery (800) 206-5936

3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302 4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710 106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470

www.midcountrymachinery.com CRAWLER EXCAVATORS 2007 KOBELCO SK 135 SR, 92hp; 20" Shoes; Operating Weight 30424 lbs; 18' Dig Depth; EROPS; A/C; Plumbed, 1421 Hrs ................$89,500 2007 KOBELCO SK 135 SR, Operating Weight 30424 lbs; 92hp; 18' Dig Depth; 20" Shoes; EROPS; A/C; Plumbed, 1276 Hrs ..................$91,500 2007 KOBELCO SK 350 LC8, Operating Weight 79600 lbs; 264 hp; Maximum Dig Depth 24' 10"; Bucket Breakout Force 29230 lbs; EROPS; A/C; HEAT; STANDARD TRACK; PAD WIDTH 32" @ 80%, 3165 Hrs ........ ..................................................................................................$160,000 2008 KOBELCO SK 80 SR, EROPS; A/C; Heat; CP Manual Quick Coupler; 6' Stick; Standard Track; 24" Shoes - 80%; Semi-U Blade; 17" CP Bucket; Operating Weight 17600 lbs; 54hp, 829 Hrs ............$70,000 2006 KOBELCO SK 115 SR, EROPS; A/C; Heat; 8' Stick; Hydraulic Thumb; Standard track; 23" Shoes - 75%; Isuzu Engine; Semi-U Blade; 3' CP Bucket; Operating Weight 31750 lbs; 84hp, 1696 Hrs ......$77,500 2006 KOBELCO SK 330 LC, EROPS; HEAT; GEITH QUICK COUPLER; 31.5" SHOES AT 75%; MITTSUBISHI ENGINE; 11FT. STICK; 2FT. HENSLEY DITCHING V-BUCKET; 238hp, 3708 Hrs ............................$189,000 2010 KOBELCO SK 260LC-8, EROPS; A/C; HEAT; 60' LONG REACH; PAD WIDTH 32" @ 95%; CHN ENGINE; TAG BUCKET 60"; STICK LENGTH 25'; Operating Weight 55556 lbs; 175hp, 800 Hrs ....$225,000 2008 JOHN DEERE 350D LC, EROPS; A/C; STANDARD TRACK; HEAT; STICK 13'; PAD WIDTH 32" @ 90%; ENGINE JOHN DEERE; OPERATING WEIGHT 77970 lbs; 271hp, 1775 Hrs ......................................$195,000 2005 HITACHI ZX160LC, 2637 Hrs ............................................$85,000 2007 HITACHI ZX80, EROPS; A/C; Push Blade; 24" Digging Bucket; Rubber Tracks; Operating Weight 15905 lbs.; Isuzu CC-4JG1 52hp Engine, 1897 Hrs 2006 KOMATSU PC160LC, 2465 Hrs ........................................$77,500 2011 KOBELCO SK 295-9 TIER 4, 31.5" SEMI-TRIPLE GROUSER SHOE; STD BOOM W/ ARM CYL; STD ARM W/ BKT CYL & LINKAGE; OPR CONT PATTERN CHGR 2 WAY SK; LOWER BASE MACHINE SK295-10; REAR VIEW CAMERA; MECHANICAL SEAT; A/C; HEAT; PAD WIDTH 32"; MECHANICAL SEAT, 493 Hrs 2006 KOMATSU PC200LC-8, EROPS; A/C; Heat; 3542 Hrs........$99,000 1996 KOBELCO SK 150 MARK IV 2011 KOBELCO SK 210, 42" Bucket; EROPS; A/C; Heat, 252 Hrs 2004 KOBELCO SK 330LC, 5054 Hrs 2005 KOBELCO SK 330LC, EROPS; A/C; Heat; 5637 Hrs ..........$85,000 2006 KOBELCO SK 330LC, 4584 Hrs ........................................$89,000 2005 KOBELCO SK 330LC, Enclosed Cab; A/C; Stick 10'; Pad Width 32", 6242 Hrs ..............................................................................$85,000 2006 KOMATSU PC200LC-7, EROPS; A/C; Heat; Stick Length 9'8"; Manual Thumb; Pad Width 28" @ 70%; Komatsu Engine, 5202 Hrs ...... ....................................................................................................$85,000 2000 GRADALL XL3200, Cummins Diesel Engine; Equipped with Cab; Telescopic 2 Piece Boom; Digging Bucket.; A/C; Heat; Pad Width 24" @ 70%, 6013 Hrs 2009 KOBELCO SK 485LC, 66" Esco Bucket 2005 JOHN DEERE 200CLC, 5075 Hrs ......................................$82,000 2006 KOBELCO SK 210LC, 2043 Hrs 2006 KOBELCO SK 160LC, Enclosed Cab; A/C; Heat; Stick Length 10'; Standard Track; Pad Width 24" @ 80%, 1732 Hrs 2012 KOBELCO SK 210, 42" Bucket, 1 Hr 2012 KOBELCO SK 210 Tier 4, 31.5" SEMI TRIPLE GROUSER SHOE; 18'6" BOOM W/ARM CYLINDER; OPR CONT PATTERN CHGR 2 WAY SK; COMBO 1-2 WAY DBL/SNGL PUMP W/; N&B ONLY-ARM (STD); STANDARD LOWER (BASE); REAR VIEW CAMERA; 9'8" STANDARD ARM; MECHANICAL SEAT; ANGLE GUARDS, 2 Hrs 2012 KOBELCO SK 210 Tier 4, 31.5" SEMI TRIPLE GROUSER SHOE; 18'6" BOOM W/ARM CYLINDER; OPR CONT PATTERN CHGR 2 WAY SK; COMBO 1-2 WAY DBL/SNGL PUMP W/; N&B ONLY-ARM (STD); STANDARD LOWER (BASE); REAR VIEW CAMERA; 9'8" STANDARD ARM; MECHANICAL SEAT; ANGLE GUARDS KOBELCO SK485, W/LABNTY SHEAR, 1980 Hrs 2007 KOBELCO SK 135SLRC, 2151 Hrs 2007 KOBELCO SK 170 LC8, 1574 Hrs ....................................$108,000 2008 CASE CX210B TRACK EXCAVATOR; ISUZU DIESEL ENGINE; CAB; AC; REACH BOOM; CONTROL PATTERN CHANGER; HEAT; WIDE PADS 31.5" @ 90%, 46 Hrs 2007 KOBELCO SK 210LC-8, DIESEL ENGINE; CAB; AC; RADIO; REACH BOOM; 42 IN DIGGING BUCKET; LONG UNDERCARRIAGE, 3079 Hrs 2012 KOBELCO 140SR TIER 3, 15'4" (4.68M) MONO BOOM; 9'4" (2.84M) STD ARM; ADDITIONAL COUNTER WEIGHT; ISO TO BHL PATTERN CHANGER; 1&2 WAY HYD W/HAND CONTROLS; 23.6" SEMITRIPLE GROUSER SHOES; A/C; HEAT; PAD WIDTH 23.5 @ 100%, 3 Hrs

(2) 2012 KOBELCO SK 260, 60' LONG REACH ATTACH W/ARM; OPR CONT PATTERN CHGR 2 WAY; LINCOLN AUTOMATIC LUBRICATION; REAR VIEW CAMERA; 31.5" (800MM) SEMI-TRIPLE SHOE; MECHANICAL SEAT, 3 Hrs 2012 KOBELCO SK 210LC 2006 KOBELCO SK 135SRMT 2008 KOBELCO SK 260 2008 KOBELCO SK 260LR, (LONG REACH) 2008 KOBELCO SK 350HT

WHEEL LOADERS 2006 NEW HOLLAND LW190.B, EROPS; 4WD; HEAT; A/C; TIRES 23.5 R25; NEW HOLLAND ENGINE; Operating Weight 35935 lbs; 205hp, 3573 Hrs ....................................................................................$85,000 2007 NEW HOLLAND W190B, A/C; GP BUCKET - CAPACITY 4.25 CU. YD.; 195HP; EROPS; 4WD; Heat; Ride Control; New Holland Engine; Operating Weight 39074 lbs; 2413 Hrs ....................................$119,500 2010 KAWASAKI 80ZV-2, EROPS; 198 HP; Operating Weight - 39308 lbs; Reach at Max Lift & Dump - 3.7ft; 4WD; Quick Coupler; Ride Control; A/C; Heat; Cummins Engine, 501 Hrs..........................$195,000 2011 KAWASAKI 65ZV-2, Enclosed Cab; Tires 20.5-25; 4 way Flasher Kit; Quick Coupler; Ride Control Kit; RIMS; Counter Weight OPT; Quick Fork 48"; A/C; Heat; 4WD, 11 Hrs 2011 KAWASAKI 65ZV-2, Enclosed Cab Assy; 4 way Flasher Kit; Ride Control Kit; Counter Weight OPT; Quick Coupler; Quick Fork 48"; Switch Batt Discon Man; Tires 20.5-25, 137 Hrs 2007 KOMATSU WA250-5L, Komatsu Diesel engine; EROPS; AC; Quick Coupler; GP Bucket; 5365 Hrs ....................................................$87,500 2004 KOMATSU WA65-3, EROPS; A/C; Heat;Quick Coupler (JRB); 4WD; Tires 335/80R 18; Komatsu Engine; Komatsu Bucket w/ Bolt on Edge; 625 Hrs DRESSER 520C, Front End Loader w/Bucket 2003 KOMATSU WA180-MC3, Enclosed Cab, 1325 Hrs 2009 CATERPILLAR 928HZ, CAT DIESEL ENGINE; EROPS; AC; 2.9 YD BUCKET; 20.5 X 25 RUBBER TIRES; 4WD; RIDE CONTROL; CATERPILLAR BUCKET W/ BOLT ON EDGE, 265 Hrs

WHEEL EXCAVATORS 1994 GRADALL G3WD, EROPS; 60" Ditching Bucket; Tires 80% 445/65R22.5, 3501 Hrs ..............................................................$20,000 2011 GRADALL XL 4100 III, EROPS; 4WD; Quick Coupler; Heat; Extendable Boom; Tires 385/65R 22.5-Goodyear @ 100%; Mercedes Benz Engine; 12 Hrs 2012 GRADALL XL4100 SIII 6x4 Highway Whl, STANDARD CENTER PIN ASY; WELD; FRONT BUMPER; XL4100/51000III 6X4 CHASSIS ASY; WELDMT; CHASSIS 6X4; HARNESS; CHASSIS ELECTRICAL; 6X4 REAR AXLE ASSEMBLY; GOODYEAR G-296; 385/65R22.5; GOODYEAR G-282; 11R24.5; WELD; BOOM REST; INSTALL; BOOM REST PLATE; BOOM & CRADLE INSTALLATION; INSTALL; SIII CHASSIS A/C; UPPER A/C INSTALLATION; PKIT; ON HIGHWAY-FIBERGLASS; LEFT REAR DOOR (USE W/AC); SWING MOTOR PORT JUMPR CIRCUIT; MOBIL 424 HYD TRACTOR; 80700000 COMMON PARTS; 4000 SIII DECAL INSTALLATION, 12 Hrs 2012 GRADALL XL4100 SIII 6x4 Highway Whl; STANDARD CENTER PIN ASY; WELD; FRONT BUMPER; XL4100/5100III CHASSIS ASY; WELDMT; CHASSIS 6X4; HARNESS; CHASSIS ELECTRICAL; 6X4 REAR AXLE ASSEMBLY; GOODYEAR G-296; 385/65R22.2; GOODYEAR G-282; 11R24.5; WELD; BOOM REST; INSTALL; BOOM REST PLATE; BOOM & CRADLE INSTALLATION; INSTALL; SIII CHASSIS A/C; UPPER A/C INSTALLATION; PKIT; ON HIGHWAY-FIBERGLASS; LEFT REAR DOOR (USE W/AC); SWING MOTOR PORT JUMPR CIRCUIT; MOBIL 424 HYD TRACTOR; 80700000 COMMON PARTS; 4000 SIII DECAL INSTALLATION, 13 Hrs 2008 GRADALL XL3100 III Highway

MINI EXCAVATORS 2008 KOBELCO SK 17SR-3, Operating Weight 3638 lb; 15.2 hp; Maximum Dig 7' 1"; Bucket Breakout Force 2900 lb; Bucket Capacity 1.55 cu. ft., 323 Hrs....................................................................$26,000 2009 KOBELCO SK 35 SR-5, 28hp; Operating Weight 7892 lbs; 10' Dig Depth; EROPS; A/C; HEAT; QUICK COUPLER (TAG); STANDARD TRACK; PAD WIDTH 12" @ 80%; YANMAR ENGINE; CP BUCKET 30"; 541 Hrs .. ....................................................................................................$41,000 2009 KOBELCO SK 35 SR-5, Auxillary Hydraulics; Operating Weight 7960 lb; 28 hp; Max Dig Depth 10' 1"; 750 Hrs ..........................$41,000 (2) 2001 IHI 35NX, EROPS; 52" Stick; 12" Shoes - 50%; Isuzu Engine; 21" Bucket w/ teeth, 3431 Hrs ....................................................$17,000

2007 NEW HOLLAND E18 SR, OROPS; AUX HYDRAULICS; STICK LENGTH 39"; PAD WIDTH 9" @ 70%; MITSUBISHI ENGINE; SEMI U BLADE; WB BUCKET 16", 328 Hrs ..............................................$21,500 2007 KOBELCO SK 35 SR-3, OROPS; Pad Width 12" Excellent Cond.; Stick 4'4"; Yanmar Diesel Engine; Dig Depth 10'1"; Operating Weight 8050 lbs, 214 Hrs ......................................................................$44,000 2003 CATERPILLAR 308C CR, CAB - HEAT - A/C; AM/FM RADIO; 18" RUBBER TRACK PADS; 7' 7" HYDRAULIC BLADE; CAT 24" GP TOOTH BUCKET W/SIDECUTTERS; AUXILIARY HYDRAULICS / FOOT CONTROL; 4M40 MITSUBISHI ENGINE, 1775 Hrs ............................$47,500 2001 JOHN DEERE 17ZTS, JD DIESEL ENGINE; OROPS; FRONT BLADE; SWING BOOM; AUXILIARY HYDRAULICS; RUBBER TRACKS; C&P HD 12" DIGGING BUCKET - WELDCO BEALES; WELDCO BEALES STYLE MANUAL COUPLER, 628 Hrs ..........................................$22,000 2012 KOBELCO SK 35SR-5, 52" Standard Stick; Rubber Tracks; Yanmar Engine; Work Lights on Arm and Canopy; Aux Hydraulics; Pad Width 12" @ 100%, 3 Hrs 2012 KOBELCO SK 55SR, 4 WAY DOZER BLADE; RUBBER TRACKS; EROPS; A/C; Heat; Aux Hydraulics; Pad Width 16" @ 100%; Yanmar Engine, 3 Hrs 2012 KOBELCO 80CS CS MIDI TIER 3, STANDARD MONO BOOM; 7'0" (2.13M) STANDARD ARM; FRONT DOZER BLADE ATTACHMENT; DOZER PREP. HYD PIPING; ISO TO BHL PATTERN CHANGER; 450MM RUBBER TRACK SHOES; 1-2 WAY PIPING (HPC) & STD ARM; CAB TOP WORK LIGHTS (2 LIGHTS)

CRAWLER DOZERS 2004 JOHN DEERE 450HLT, 73hp; Operating Weight 15500 lbs; 16" Shoes, 1463 Hrs ........................................................................$35,000 1990 MISCELLANEOUS TD7G, OROPS; STANDARD TRACK; PAD WIDTH 17" @ 60%; CUMMINS ENGINE; PAT BLADE, 3969 Hrs $18,000 2006 CATERPILLAR D6R XL III, EROPS; A/C; Heat; Standard Track; Pad Width 24" @ 80%; Caterpillar Engine; Semi U Blade, 8337 Hrs$143,000 2007 KOMATSU D31EX, EROPS; A/C; Heat; Pad Width 16"; Komatsu Engine; PAT Blade, 1710 Hrs ......................................................$44,500 2008 JOHN DEERE 650J LGP, EROPS; A/C; Heat; Standard Track; Pad Width 24" @ 80%; John Deere Engine; PAT Blade; Laser Leveling System (Top Con MC-R3); Work Lights; Very Clean Unit, 1769 Hrs........ ..................................................................................................$179,500 2011 JOHN DEERE 650J XLT, John Deere Diesel Engine; OROPS; Hydrostatic Transmission; Front Sweeps; Front; Engine enclosures; 18 in. SG Salt pads; 105" 6 way blade; long track frame, 742 Hrs 1986 CATERPILLAR D7H, EROPS; Aux Hydraulics; Heat; Standard Track; Pad Width 26" @ 70%; Caterpillar Engine; Semi U Blade $67,500 1977 CATERPILLAR D8K, 6657 Hrs 1974 DRESSER TD15C 2007 CATERPILLAR D6T XW, Caterpillar Replaced System 1 undercarriage with; an Extreme Service Undercarriage; @3300 hours; EROPS; CAB; A/C; Semi-U Blade with Tilt, 3844 Hrs 1994 CATERPILLAR D5H XL, 11319 Hrs 2007 CATERPILLAR D6N XL, CAB; A/C; SWEEPS; SU BLADE WITH TILT, 3891 Hrs 2008 CATERPILLAR D6T LGP, CAT DIESEL ENGINE; EROPS; AC; HEAT; STRAIGHT BLADE WITH TILT; DRAWBAR; LONG TRACK FRAME; ENGINE ENCLOSURES, 4124 Hrs 2008 CATERPILLAR D6N LGP, CAT DIESEL ENGINE; EROPS; AC; 6 WAY BLADE; 33 IN PADS; 4 VALVE HYDRAULICS; DRAWBAR; ACCUGRADE READY OPTION, 3583 Hrs 2006 CATERPILLAR D6N LGP, CAT DIESEL ENGINE; EROPS; AC; 6 WAY BLADE; HEAT; WIDE PADS 33" @ 85%, 3580 Hrs 2005 CATERPILLAR D6R XW II, 10978 Hrs 2007 JOHN DEERE 700J LGP, JOHN DEERE DIESEL ENGINE; EROPS; AC; 6 WAY BLADE; WIDE PADS 1996 CATERPILLAR D6H XL, Enclosed Cab, 17418 Hrs 2008 CATERPILLAR D6N LGP, Enclosed Cab; Heat; A/C, 3038 Hrs 2005 CATERPILLAR D5N LGP, Enclosed Cab; A/C, 7612 Hrs 2000 CATERPILLAR D6R, 4256 Hrs 2007 CATERPILLAR D6R XW, Enclosed Cab; A/C; Heat; Pad Width 30" @ 80%; Caterpillar Engine; Semi-U Blade, 4919 Hrs 2007 CATERPILLAR D6T XW, 6924 Hrs

CRAWLER LOADERS 2005 CATERPILLAR 963C, CAT Diesel Engine; EROPS; AC; GP Bucket, 3799 Hrs ....................................................................................$82,500 2004 CATERPILLAR 63C

Page 28 â&#x20AC;˘ May 26, 2012 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

BETTER RENTAL SOLUTIONS. From the Regionâ&#x20AC;&#x2122; nâ&#x20AC;&#x2122;s Largest Construction Consstruction Equipment ent Dealer Network. 15

Williston Williston

MONTANA MO TANA MONT M ANA AN NA NA

Miinot Minot Grand Forks Forkks Crookston Crooksto C o oo ooksto n

NORTH NOR N ORTH DA ORT D DAKOTA KO OTA T

Grea FFalls Gre Great alls Missoula M issoula

Duluth D lu uth th

Fargo Tractor Tractor Fa Fargo rgo FFargo

Bismarckk

Dickinson Dick ckinson

MINN NESOTA NE T MINNESOTA

TTitan itan Rentals Ren entalss Helena en He e Mandan Mand M ndan d (Twin dan (TTwin City Imp) B Bozeman 90

Skyy Big g SSk

Billi Billing B illing gs gs Billings Titan Rentals Titan Re e lls Billings enta llings lings i gs

Aberdeen (HC (H HC C Clark Imp) p)

Aberdeen A d e dee en n

WISCONSIN WISC SC CONSIN

R Ro Rogers

TTwin Tw in n Citie C Cities t es 94

Rapid R apid Cityy

Gillette Gillett e

Shakopee Shakope p R pe pee Rosemount Rosemoun se semoun emou e mou oun unt

WYOMING W WY YOM MING MI G

Marshall M Ma Marsh arrshall rsh h l

SOUTH S OUTH UTH DA K TA KO DAKOTA

Sio oux FFalls aalls al lls lls Sioux

Albert Albe ert Lea er Lea

LaCrosse rosse 94

Tri-State Tr i-State ate t Equipment Equipmen m t men

Casper

Lake a Clear Lake

NE EBRASKA NEBRASKA

Sioux City ty ty De Des es Moines

Cheyenne enne en n

Kearneyy Ke Lexington Le xxington gto o on

Fort Fort Collins Collins

COLORADO CO OLORADO O

Omaha Oma O maaaha ha ha

North Nor th Platte G d Grand IIsland l nd d

Lincoln Linco olln o l

Center Ce ente nter nt Point P o t oin Davenport Davenpor D vven venpor nport

IOWA IO OWA WA

D nvver De Denver 70

Colorado C olorado o Springs rings

CASE CE

NEW HOLLAND CE

7,7$1 WLWDQUHQWV V FRP

Senate Vote Clears Vikings for Stadium By Martiga Lohn and Brian Bakst ASSOCIATED PRESS

ST. PAUL, Minn. (AP) The Minnesota Vikings moved to within a governorâ&#x20AC;&#x2122;s signature of getting a new $975 million stadium on May 10 after the state Senate approved a plan that relies heavily on public financing. Gov. Mark Dayton has said heâ&#x20AC;&#x2122;ll sign the measure, meaning the Senateâ&#x20AC;&#x2122;s 36-30 vote was effectively the final barrier for the stadium. The House passed it. The team has chased a new stadium for nearly a decade, but didnâ&#x20AC;&#x2122;t have leverage until its lease expired this past year. Dayton led the charge this year, fearing the team might leave the state if it didnâ&#x20AC;&#x2122;t get a new building. Under the bill, the teamâ&#x20AC;&#x2122;s future in Minnesota would be guaranteed for three decades. The Vikings would pay 49 percent of construction costs. The public expense is high: $348 million for the state and $150 million for the city of Minneapolis. Even before the final Senate vote, the stadium bill had taken on an air of inevitability after the House approved it and adjourned for the year early May 10. Opponents conceded during the Senate debate that the bill would become law, even though they expressed unease with the stateâ&#x20AC;&#x2122;s share backed by expanded gambling. Stadium backers talked about the pain of losing the Lakers and the North Stars to other states in past decades, and said they were inundated with messages from Vikings fans urging them to keep the team here.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 29

• EFI Engine with Auto Idle • Sealed and Pressurized Cab • Switchable Joystick Controls • Cushioned Boom Cylinders

Engine Power 89hp (66.7 kW) @ 2,400 rpm Bucket Breakout Force 13,875 lb. (6 299 kg) Tipping Load 6,400 lb. (2 906 kg) SAE Rated Operating Cap. 3,200 lb. (1 453 kg)

**0.0% Financing for 42 Months. ** Offer ends 05/31/12. Subject to approved credit on John Deere Financial Installment Plan, for commercial use only. Prior purchases are not eligible. Available at participating dealers. Some restrictions apply. See your dealer for complete details and other financing options.

RDO Equipment Co. Burnsville, MN Matt Dull 952-890-8880 • mdull@rdoequipment.com

Scharber & Sons Rogers, MN Randy Thorstad 612-840-3464

Isanti County Equipment Isanti, MN Jesse Kraft 763-444-8873

www.mnequipmentsolutions.com

Page 30 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ May 26, 2012 â&#x20AC;˘ Page 31

Â&#x160;Â&#x2022;Â&#x2022;Čą Â&#x2DC;Â&#x17E;Â? Call DougČąČŚ/Čą Â&#x160;Â&#x;Â&#x17D;ÇąČąČą Sam: (866) 485-7180

2001 Komatsu PC228USLC-3; #80703, Cab/AC, 9â&#x20AC;&#x2122;6â&#x20AC;? Arm, 31.5â&#x20AC;? Tracks, JRB QC, 5150 hrs ........ ............................................................$109,500

2007 Komatsu PC300LC-7E0; #81265, Cab/AC, 13â&#x20AC;&#x2122; Arm, QC, 5550 hrs ........................$159,500

2005 Cat 953C LGP; #80890, Cab/AC, GP Bkt/Teeth, 2-Stick Control, 4100 hrs ....$89,500

2003 Komatsu WA450-5; #80597, Cab/AC, JRB QC/Bkt, Good Paint, 8700 hrs ............$129,500

2011 Komatsu D65WX-16; #81663, Ripper Hyd, Sigma Blade, Sweeps, 30â&#x20AC;? Tracks, 650 hrs ................................................................$CALL

2006 Ingersoll-Rand SD116DX; #80790, OROPS, 84â&#x20AC;? Drum w/ Shell Kit, 1900 hrs ..........$89,500

2010 Komatsu PC350LC-8; #81636, Cab/AC, 10â&#x20AC;&#x2122; Arm, 33.5â&#x20AC;? Shoes, 3100 hrs ..............$CALL

1990 Dresser 850; #81668, Cab, 13â&#x20AC;&#x2122; Moldboard, 14x24 Tires, 3600 hrs ..........................$39,500

2007 Komatsu D51EX-22; #81332, Cab/AC, 20â&#x20AC;? Shoes, PAT Blade, 1500 hrs................$119,500

2003 Komatsu D37PX-21; #80781, OROPS, 24â&#x20AC;? Shoes, Good U/C, 4850 hrs............$59,500

2007 Komatsu PC138USLC-8; #81142, 27.5â&#x20AC;? Shoes, Aux Hyd, 8â&#x20AC;&#x2122; 2â&#x20AC;? Arm, 3100 hrs $109,500

2007 Komatsu WA250-5; #81439, Cab/AC, QC/3 yd Bkt, 3rd Valve, 4100 hrs........$109,500

Page 32 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

44th Annual IAAP Convention Offers Full Day of Industry Events Jerry Sammons (L) of Telsmith Inc. and Terry Hennessey of Fabick CAT are enjoying the 44th annual convention.

Greg Hilliard (second from L) of William Charles Construction stops by the Howell Tractor & Equipment booth to see (L-R) Mike Kohler of Allied Construction Products, and Alan Johnson and Bob Byrne of Howell Tractor & Equipment. CONVENTION from page 16

Rod Skindrud (L) and Jim Georgantones of Unified Screening & Crushing display their product cards at the convention.

(L-R): Bernie MacDougall of Thor Global Enterprises, Brek Zortman of Aring Equipment Co. and Tim Miller of FLSmidth Inc. man the Aring Equipment Co. booth.

IAAP Executive Director John Henriksen goes over the legislative report at the annual convention.

Senior Project Manager Larry Geraghty of Meade is eager to share information on his company.

Manning the Process Machinery Inc. booth are Dave Olmsted (L) and Dawson Horn.

(L-R): Becky Kazmierski, Brian Rice and Jim Van Briesen are part of the committee chair that will outline current activities for IAAP.

(L-R): Mark Krumenacher, Annick Maenhout and IAAP President Anne Cramer make up the rest of the team for the committee chair. see CONVENTION page 66

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 33

Come join us ON THE ROAD Wacker Neuson & Burris Equipment • FREE food and beverage • See the new CRT 60, 10 ft. ride-on trowel • Test your skills with the Vertical Digging System Excavator Challenge

Enter to Win a Free 50” HD TV

e Experience th ed el he w st late excavators, dumpers and loaders!

You don’t want to miss this! Where: Date: Time: Address: Phone:

Burris Equipment Tuesday, June 5, 2012 8:00 AM – 5:00 PM 2216 N. Greenbay Rd. Waukegan, IL 60087 847-336-1205

Date: Thursday, June 7, 2012 Time: 8:00 AM – 5:00 PM Address: 10351 W. Laraway Rd. Frankfort, IL 60423 Phone: 815-464-6650

www.burrisequipment.com www.WN-OntheRoad.com

Toro Company Expands Rental Offering With Light Equipment The Toro Company has acquired light construction and hardscape product assets of Stone Construction Equipment Inc., which manufactures concrete and hardscape equipment for rental and construction companies. Terms of the transaction were not disclosed. This acquisition builds on Toro’s position in the growing rental market with a reputable line of branded products in the hardscape space, which include concrete and mortar mixers, material handlers, compaction equipment, and other concrete power tools. These products further extend Toro’s offering to contractors and rental companies, and complement its recent acquisitions of tree care and turf renovation product lines. “Stone built a solid reputation around quality,” said Rick Rodier, general manager of Toro’s Sitework Systems Business. “These products are respected by rental and construction customers, and complement our current line of compact utility equipment and trenchers extremely well. We see great opportunity to leverage our core strengths in innovation, engineering and distribution to grow share in these new categories.”

About the Toro Company The Toro Company is a provider of turf and landscape maintenance equipment, and precision irrigation systems. With sales

“Stone built a solid reputation around quality.” Rick Rodier Toro

of nearly $1.9 billion in fiscal 2011, Toro’s global presence extends to more than 90 countries. Since 1914, the company has built a tradition of excellence around a number of strong brands to help customers care for golf courses, sports fields, public green spaces, commercial and residential properties, and agricultural fields. For more information, visit www.toro.com.

EQUIPMENT

Page 34 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Robert Allee Appointed to Murphy Tractor Accounts Manager Murphy Tractor & Equipment Company Inc., appointed Robert Allee to midwest region major accounts manager, effective June 1, 2012. Allee joined the company as a territory sales manager in 2011 for the Cincinnati, Ohio, location. Upon the effective date of his new position, he will be based out of the Columbus, Ohio, location. As a major accounts manager, Allee will be responsible for ensuring consistent communication, a superior level of product support and a coordinated sales experience, for large customers in the states of Ohio and Pennsylvania. He has substantial experience in the industry, having served in several management capacities at the dealership level, including branch manager, field service supervisor and product support manager. “Given his background in sales and product support, we anticipate Robert will bring considerable expertise and value to this new position. He will be a valuable resource for our large accounts and enable Murphy Tractor to provide a seamless sales and product support customer experience in any midwest region branch,” said Mike Slinger, region manager. Murphy Tractor and Equipment Company Inc., one of John Deere’s largest North American construction equipment dealer organizations, is headquartered in Park City, Kan. The organization has 28 locations throughout the mid-western states of Iowa, Kansas, Missouri, Ohio, Murphy Tractor & Equipment Company Inc. appointed Robert Allee to midwest region major Pennsylvania and Nebraska. For more information, visit www.murphytractor.com. accounts manager, effective June 1, 2012.

SANY SCC8100 Crane Aids in North Dakota Oil Boom In January, Lafayette, La., based United Vision Logistics joined a growing number of companies switching to SANY’s high-end line of global crawler cranes. Since that time, the company’s 110-ton (100 t) SCC8100 has logged more than 400 hours relocating oil rigs and proving its reliability in remote parts of North Dakota. “Our new SANY crawler crane is truly a first-class machine,” said Mike Rusek, category manager of rig moving at United Vision Logistics. “The power delivery is smooth, and even when the temperature dropped to negative 40 this winter, the SCC8100 never left us stranded.” In North Dakota oil country, soft ground conditions can create a hazardous environment for heavy equipment. In one instance, Rusek explained, United Vision Logistics’ SANY crane entered a soft spot while carrying a load and sank down more than half a track depth. The machine’s power-toweight ratio allowed it to pull

through quickly. In addition to offering a standard two-year parts and service warranty, SANY’s global cranes feature trusted components such as Rexroth pumps and Cummins engines. “The people at SANY America have gone out of their way to work with us, and that’s what makes me want to do business with them” Rusek said. “Their dealer Four Seasons Equipment out of Houston, Texas, even opened an office near us in North Dakota.” SANY America markets, rough terrain cranes, crawler cranes, excavators, and port machinery in North America. Last fall, SANY announced it will build a $25 million R&D center alongside its 400,000 sq. ft. manufacturing headquarters in Peachtree City, Ga. When complete, the site will employ 300 hydraulic and mechanical engineers. For more information, contact 678/251-2810.

The company’s 110-ton (100 t) SCC8100 has logged more than 400 hours relocating oil rigs and proving its reliability in remote parts of North Dakota.

Attachments

SECTION

Pages 35-39

General Equipment DIG-R-TACH Series Offers Greater Versatility For greater job site versatility, General Equipment Company’s DIG-R-TACH line allows for use with both small and large hydraulic systems. It is ideal for skid steer loaders, small excavators, knuckleboom cranes and small backhoes. The 671 DIG-R-TACH Series 16 earth drilling attachment is intended for smaller hydraulic systems, whereas the Series 24 is designed for larger hydraulic systems found with backhoes and excavators. Featuring a two-speed chain/sprocket drive and a 5 to 20 gpm (19 to 76 Lpm) hydraulic flow range, the Series 16 balances smaller flow volumes in proportion to auger diameters. The result is a cleaner hole with less loose soil and debris. For higher capacity drilling, the Series 24 operates in a 15 to 25 gpm (57 to 95 Lpm) hydraulic flow range and delivers a maximum drilling torque

of 2,018 ft.-lbs. at 2,500 psi. General Equipment Company’s 671 DIG-RTACH series utilizes a drilling industry standard 2 in. (5 cm) hexagon auger drive system. This design eliminates excessive auger driveshaft wear. A complete line of earth augers up to 36 in. (91 cm) in diameter is available with Pengo-type, caststeel boring heads and forged teeth for maximum digging performance. For additional drilling depth, full-flighted auger extensions can be added. For those that prefer a round auger drive system, the 753 DIG-R-TACH series offers a 2-9/16-in. (6.5 cm) auger connection. Installation of all DIG-RTACH models is simple with a dipper-stick mounting bracket, according to the manufacturer. For more information, call 800/533-0524 or visit www.generalequip.com.

The 671 DIG-R-TACH Series 16 earth drilling attachment is intended for smaller hydraulic systems.

FFC Offers Debris Removal, Soil Preparation in One Machine The FFC Preparator manufactured by Paladin is designed and built to separate rocks and other debris from the soil while leveling and smoothing to prepare the soil for seeding or sod. Powered by the skid steer’s hydraulics, the FFC Preparator features a rotating bidirectional drum that can till up to 2.5 in. (6 cm) deep. Its perforated bucket allows dirt to sift through while retaining up to 12.5 cu. ft. (.3 cu m) of the rock and debris depending on the model size. Its unique design and adjustable skid shoes allow the FFC Preparator to follow the ground contour while collecting rocks and debris, tilling soil, uprooting foliage, scarifying, raking and collecting foliage, eliminating the need for extra machines and/or attachments to perform some of these duties. The FFC Preparator is available in three models with struck bucket capacities ranging from 8.9 to 12.5 cu. ft. (.2 to .3 cu m). It attaches to skid steers with a 10- to 25-gpm (37.8 to 94.6 Lpm) hydraulic flow rate and less than a 9,000-lb. (4,082 kg) lift capacity. For more information, call 800/456-7100 or visit www.paladinconstructiongroup.com.

The FFC Preparator is available in three models with struck bucket capacities ranging from 8.9 to 12.5 cu. ft. (.2 to .3 cu m). It attaches to skid steers with a 10- to 25-gpm (37.8 to 94.6 Lpm) hydraulic flow rate and less than a 9,000lb. (4,082 kg) lift capacity.

Page 36 • May 26, 2012 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

SweepEx Mega 600 Offers 60-Inch Sweeping Surface In order to address cleanup, material handling and snow removal applications, the SweepEx Mega 600 is built with a 60-in. (152 cm) long mainframe. Ideal for a wide variety of applications including cleanup of dirt, leaves, snow, material spills, standing water, steel shavings and gravel, the SweepEx Mega Series broom attachment is adaptable to most service vehicles. Mounting kits for forklifts, bucket lips, three-point hitches (class 1 & 2) and skid-steer pivots are available to maximize the broom’s versatility. Designed for high productivity and minimum down time, SweepEx brooms are built with no moving parts, eliminating the cleaning and lubrication of sprockets and bearings typically associated with rotary-style brooms. Brush replacement is quick and easy with the unique brush section system. By simply detaching the rugged end protectors, the broom’s brush sections are easily replaced, rotated or removed. The SweepEx broom’s polypropylene brush sections offer both durability and flexibility. The unique bristle action of the broom minimizes dust and flying debris, protecting the operator, machinery and work environment, according to the manufacturer. Constructed of industrial steel and protected with a heavy powder-coat finish, the Mega Series includes 11 brush rows for maximum cleaning power. With the ability to attach MegaWing 90 (9-in. [23 cm]) and MegaWing 180 (18-in. [45 cm]) broom extenders to each end of the broom, the Mega 600 can be increased up to 96 in. (244 cm) for the largest applications. Other SweepEx Mega Series models include the Mega 480 (48-in. [122 cm] mainframe) and Mega 720 (72-in. [183 cm] mainframe). Optional accessories for all SweepEx models include a magnetic bar, dustmop, edge marker kit and debris containment ends. For more information, call 800/725-8377 or visit www.trynexfactory.com.

SweepEx brooms are built with no moving parts, eliminating the cleaning and lubrication of sprockets and bearings typically associated with rotary-style brooms.

Carbide Cutter G3 Mulching Head Attachment Unveiled As part of its VMLogix line of products, Loftness introduced the Carbide Cutter G3 high-performance mulching head attachment for skid steers. This new generation product incorporates the latest cutting-tooth technologies and power drive systems, while maintaining the rugged reliability expected of Loftness equipment, according to the manufacturer. The Carbide Cutter G3 is available with 51-, 61- and 71-in. (129, 155 and 180 cm) cutting widths. All models are offered with a variety of carbide-tipped and heat-treated steel teeth to match any job application. The precisely engineered spiral tooth pattern on the rotor ensures continuous tooth contact with the material being cut. For maximum cutting performance, the Carbide Cutter G3 features a two-stage cutting chamber with staggered counter teeth and a shear bar. This combination of features results in small particle sizes, while eliminating the jamming and wrapping issues associated with competitive products. An optional primary-stage shear bar also is available for ultra-fine mulching. The mulching heads operate at 1,700 to 2,150 rpm and feature a four-groove banded belt drive with spring-loaded tensioner. They come standard with a fixed-displacement,

piston-style motor that delivers hydraulic power at 97-percent efficiency, which is much higher than traditional gear-type motors offer. The fixed-displacement motor can be upgraded to the V-Drive system that includes a variable-displacement motor with

load-sensing technology. Under light loads, the V-Drive system operates at maximum rpm, and as the load increases, it automatically lowers the rotor rpm to maximize torque. The mulching head offers full rotation,

The Carbide Cutter G3 is available with 51-, 61- and 71-in. (129, 155 and 180 cm) cutting widths. All models are offered with a variety of carbide-tipped and heattreated steel teeth.

due to specially designed hose routing. This feature also allows the unit to easily position trees with the adjustable push bar and welded claw hooks. The push bar can be used to push falling brush and trees away from the power unit, and the claw hooks can pull material into position for proper feeding. Hydraulic push bar adjustment is optional. The Carbide Cutter G3 also is designed for maximum durability. For instance, highstrength Hardox steel is used in areas exposed to high wear. Furthermore, the Carbide Cutter G3 is equipped with a custom hydraulic control valve that protects the unit from pressure spikes, and it also stops the rotor quickly on shut-down without damaging the components. Other standard features include an onboard pressure gauge, steel deflector chains and adjustable skid shoes. Tooth options include standard carbide teeth, planer carbide teeth and quadco planer blades. Loftness manufactures the VMLogix line of vegetation management equipment, the GrainLogix line of grain-bagging equipment, and the CropLogix line of crop shredders. For more information, call 800/828-7624 (U.S. and Canada) or 320-848-6266 (international), or visit www.vm-logix.com.

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • May 26, 2012 • Page 37

Diversified Products Introduces Man Baskets for Service Cranes

Diversified’s man basket is made from heavy-duty steel for withstanding tough job site conditions. The full-sized floor is 30 in. wide by 30 in. (76 by 76 cm) deep, and the inward-opening doors are designed to save space, promote easy entry and provide additional worker safety.

Diversified Products’ Quick Attach Man Baskets are specially designed for use on service cranes. The yoke-style basket features a universal mounting bracket for installation on a wide variety of service crane styles, and it provides a much safer option for construction and utility work than using ladders or climbing on equipment. It also extends the versatility of service cranes used in mines, petrochemical plants and a wide variety of other large equipment applications. Diversified’s man basket is made from heavy-duty steel for withstanding tough job site conditions. The basket also provides improved access to equipment, and its design allows the unit to be stored on the service body. The full-sized floor is 30 in. wide by 30 in. (76 by 76 cm) deep, and the inward-opening doors are designed to save

space, promote easy entry and provide additional worker safety. Further safety features are incorporated to help the man baskets meet or exceed ASME standard B30.23 for personnel lifting systems. These features include floor slots to drain water, as well as upset holes to prevent slippage. Additionally, each man basket contains a low-maintenance, high-capacity caliper brake. Options for the man baskets include a step for added convenience, a stand for installation on uneven ground or large cranes, and a CSA-approved upper basket enclosure. Besides this product, Diversified also offers a full line of yoke-style, rotating and custombuilt man baskets for other types of equipment. For more information, call 254/757-1177 or visit www.diversifiedproduct.com.

Page 38 • May 26, 2012 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • May 26, 2012 • Page 39

PROVIDING SUPERIOR PRODUCTS & SUPPORT SINCE 1996

Multi-ply Your Money! with the excavator rock ripping

Multi-Ripper or the Multi-Ripper Bucket ®

Multi-Ripper Bucket

Multi-Ripper Multi-Ripper

Hi-Cap Multi-Ripper Bucket

Rip the Rock instead of Blasting or Hammering

Maximize force 6 to 9 times the force one tooth at a time, of a standard 5 tooth bucket using our patented 4 times faster than a hammer "Shanks on an Arc" Rips the sides and bottom of the technology. trench flat, with no depth limitation "the greatest Celebrating our 10th Year advancement I have seen Designing Innovative Products for excavating rock!" Made In USA! Ronnie Lewis, Lewis Contractors, Inc.

eading "Leader in Excavator Rock Ripping Attachments" dge visit: www.digrock.com ttachments, e-mail: sales@leattach.com Inc. ®

call to order: 866-928-5800 or 508-829-4855

Get the latest news online.

Visit CEG’s Web Site at www.construction equipmentguide.com

ASK ABOUT OUR BREAKER AUTOLUBE SYSTEMS!

Slab Crab Makes Jobs Easy

The Slab Crab makes removal of concrete slabs and bridge decks a one-man job, according to the manufacturer. The contractor simply saw cuts the concrete into manageable slabs and picks them up. They can then be loaded directly onto the truck bed. A single operator can remove slabs cleanly, without disturbing sub-base. Slab Crab models can accommodate slabs ranging from 4 to 20 in. (10 to 51 cm) thickness. This bucket is available for excavators from 5,000 to 150,000 lbs. (2,268 to 68,039 kg), and models also are available to fit skid steer and backhoe machines. The Slab Crab is available as a direct pin-on or to accept the Kenco WedgeBolt Coupler System. For more information, call 800/653-6069 or visit www.kenco.com.

Ask about FREE Shipping

Page 40 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Built to per perform form Gr Grove ove mobile telescopic cranes Grove all-terrain, rough-terrain and truck cranes are long-lasting and hard-working. High performance features help execute even the most challenging lifting jobs with strength, precision and control. Our cranes offer the versatility to tackle any project, with capacities ranging from 8t to 450t.

Gr Grove ove cranes range in capacity

fr from om 8t to 450t

ealer or visit visi www Contact your dealer www.manitowoc.com/cranesdealer

Kirby Smith Machinery Inc. 12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700

6715 W. Reno Oklahoma City, OK 73127 405/495-7820 Kansas City, KS 913/850-6300 877/851-5729

Cleveland Crane & Shovel Sales, Inc. 26781 Cannon Road Cleveland, OH 44146 440/439-4749 800/362-8494 Fax: 440/439-2177 aforepaugh@ craneandshovel.net www.craneandshovel.net

Walter Payton Power Equipment LLC 930 W 138th Street Riverdale, IL 60827 708/656-7700 Fax: 708/532-1273 25210 Brest Road Taylor, MI 48180 734/947-9250 Fax: 734/947-9260

920 S State Road 39 Lebanon, IN 46052 765/482-4145 Fax: 765/482-4928 2126 Glenview Drive Evansville, IN 47720 812/422-6912 Fax: 812/422-6982

Trucks & Trailers

SECTION

Pages 41-51

Doosan DA30 Articulated Dump Truck Offers More Power are available) allow the operator to concentrate on working conditions, while a new electronic system and simplified fingertip controls with digital display make operating easier.

The Doosan DA30 articulated dump truck is the latest in a line of redesigned machines offering increased engine power and torque, higher payloads, lower fuel consumption, enhanced operator comfort and faster travel speeds, according to the manufacturer. More Power Powered by a 6-cylinder interim Tier IV compliant diesel engine with a gross power output of 365 hp (272 kW), the new DA30 offers an 8 percent increase in engine power compared to the previous MT31 model. With a 28 percent increase in gross torque to 1381 ft.lb. at 1,300 rpm, combined with a higher top speed of 34.2 mph (55 kmh), the DA30 is a top contender in its class. Contributing to the overall eight percent reduction in fuel consumption is the new transmission offering eight forward and four reverse speeds. The new transmission improves the transfer of power from the engine to the wheels for enhanced traction. To withstand the increased power, the driveline dimensions and cooling capacity of the truck have been increased. Better Performance The DA30 has been optimized for extreme performance. The undercarriage, designed to ensure that all six wheels are in permanent contact with the ground, means the DA30 can operate on very rough and soft terrain on construction sites such as road projects and mass excavation hauling as well as in mining and quarrying applications. The sloping design of the DA30 enhances the stability of the machine due to its low center of gravity and allows fast and easy dumping, even in the most demanding conditions. Permanent

The sloping design of the DA30 enhances the stability of the machine due to its low center of gravity and allows fast and easy dumping, even in the most demanding conditions.

six-wheel drive provides equal power distribution while the freeswinging rear tandem bogie and the special articulation system offer added driving performance in difficult terrain. The articulation hinge is positioned behind the turning ring to provide equal weight distribution to front wheels, even during maximum turning, and ensures full contact between the front wheels and the ground for optimum traction. The DA30 uses two hydraulic shock absorbers and tall rubber springs on each side, along with no rigid axle, to provide a totally independent suspension. Like all Doosan ADTs, the

Easy Maintenance The cab of the DA30 can be tilted backward to provide easy access to components for hasslefree routine maintenance. Easier service access and longer service intervals result in lower operating costs. A fully automatic central greasing system and rear view camera are standard. The DA30 — like every new Doosan machine — is covered by a 48 hour parts guarantee. The program guarantees that if a “machine-debilitating” part is needed, Doosan will deliver it directly to the end user within two business days or Doosan will pay for a replacement machine rental. The 48 Hour Parts Guarantee is subject to carrier delivery restrictions and/or governmental agency delays. For more information, visit www.doosanequipment.com.

DA30 features a powerful engine brake and hydraulic transmission retarder as standard. The wet brakes offer a long service life and sealed protection from the environment and, with oil-cooled multiple disc brakes on all the wheels, the DA30 can handle various operating conditions. Ultimate Comfort A completely new cab provides the operator with more space, improved visibility and noise levels and a fully automatic climate control system. The fully automatic 8-gear transmission and smooth Tiptronic gear-shifting (both automatic and manual gear functions

The Doosan DA30 articulated dump truck is the latest in a line of redesigned machines.

Page 42 • May 26, 2012 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

DuraSeal Tire Survives 367 Punctures Without Losing Pressure While this year’s Mid-America Trucking Show in Louisville, Ky., drew a record number of attendees, The Goodyear Tire & Rubber Company set its own record of sorts during the threeday event due to its DuraSeal Technology. Mid-America Trucking Show attendees drove 367 nail holes into a Goodyear G394 SST wide-base trailer tire at the tire manufacturer’s booth — without any impact on tire inflation. Attendees punctured the tire using Goodyear’s “DuraSeal Popper,” a device that enables users to pierce the tread area of a tire by pulling down on a handle. (The tire was mounted on the DuraSeal Popper, but not under a load at the time.) “The results were eye-popping,” said Tim Miller, marketing communications manager, Goodyear Commercial Tire Systems. “DuraSeal Technology is the industry’s first and only built-in tire sealant, and is Mid-America Trucking Show attendees drove 367 nail designed for multiple punctures while holes into a Goodyear G394 SST wide-base trailer tire maintaining tire pressure.” DuraSeal is a yellow, gel-like rubber at the tire manufacturer’s booth — without any impact compound that instantly seals puncon tire inflation.

DuraSeal is a yellow, gel-like rubber compound that instantly seals punctures of up to 1/4-in. in diameter in the tread area of the tire. (It does not seal sidewall punctures.) As a nail enters the tire and reaches the tire’s inner liner, DuraSeal immediately surrounds the puncture to seal the leak.

tures of up to 1/4-in. in diameter in the tread area of the tire. (It does not seal sidewall punctures.) As a nail enters the tire and reaches the tire’s inner liner, DuraSeal immediately surrounds the puncture to seal the leak. “If the nail is pulled out, DuraSeal can instantly fill the hole and keep air from escaping,” said Miller. “People

are amazed that a truck tire can seal itself.” Goodyear’s DuraSeal Technology is available in drive and trailer tires for over-the-road applications, plus in allposition tires for mixed service and waste-haul applications. For more information, visit www.goodyeartrucktires.com.

J&J Truck Equipment Launches Newly Designed Web Site J&J Truck Equipment, a division of Somerset Welding & Steel, has launched a newly designed Web site. The site features an indepth look at the products and services the company offers, an instock inventory list, company newsletters and an easy method for customers to request more information. “In today’s fast paced environment, a company’s Web site is often the customer’s first stop to get information, so we updated our site to make it easier and faster for them to find what they need,” said general manager Craig Hauger. “We want customers to have the same great experience whether you walk into the J&J Truck Equipment showroom or visit us online.” About the Company Somerset Welding & Steel expanded J&J Truck Equipment in 2011 after exiting the agriculture and construction equipment business formally known as J&J Truck Equipment has launched a newly designed Web site. Lincoln Supply & Equipment.

The company manufactures its own line of winch trucks, lubrication trucks, custom flat beds and distributes premium lines of truck equipment including Knapheide, TruckCraft and Auto Crane. J&J also distributes snow and ice removal equipment such as Boss, Fisher and Swenson, and is the first distributor of the VEWI vehicle equipment washing system. J&J Truck Equipment recently renovated its facility in Somerset, Pa., to offer a truck equipment showroom along with a full stock of truck equipment parts and accessories. J&J offers complete repair and refurbishment services for all truck equipment brands. Somerset Welding and Steel, Inc. is a subsidiary of Riggs Industries founded in 1958. The company currently operates J&J Truck Bodies & Trailers and J&J Truck Equipment. Somerset Welding & Steel is an ISO 9001:2008 certified company, serving clients worldwide. For more information, visit www.jjtruckequipment.com.

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • May 26, 2012 • Page 43

Scharber & Sons, Inc. www.westsidetractorsales.com 2170 South Yost Ave. 1400 W. Ogden Ave. Bloomington, IN 47403 Naperville, IL 812-333-9677 630-355-7150 Fax: 812-333-9731 310 W. 162 St. Rt. 6 5400 Industrial Rd. South Holland, IL Fort Wayne, IN 46825 708-331-6362 260-482-8576 Fax: 260-483-4057 3110 Prairie Rd. 7355 East 30th St. Rockford, IL Indianapolis, IN 46219 815-961-3160 317-544-3411 1560 North Old Rand Rd. Lafayette, IN 47905 Wauconda, IL 765-477-6933 847-526-7700 Fax: 765-448-9038 600 Walnut Ct Rockdale, IL 815-730-9011

South Bend, IN 46619 574-232-1461 Fax: 574-233-3324

13725 Main Street Rogers, MN 55374 763-428-4107 Fax: 763-428-2700 www.scharbers.com

949 3rd Ave. Windom, MN 56101 507-678-2752

Ditch Witch of North Dakota 6140 Highway 10 NW Anoka, MN 55303 763-323-1720 888-448-5266 Fax: 763-422-3949 3021 West 133rd Shakopee, MN 55379 952-445-6310 Fax: 952-496-0263 23580 Highway 55 Loretto, MN 55357 763-479-8200 Fax: 763-479-8201

Kentucky 13090 Aiken Rd. Louisville, KY 40223 800-507-9705

1015 Highway 212 West Norwood Young America, MN 952-467-2182 Fax: 952-467-3259

2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551 Fax: 701-663-0692

4233 Russellville Rd. Bowling Green, KY 42101 866-528-9699 140 James Lewis Rd. London, KY 40744 877-231-7151 3279 Lexington Rd. Richmond, KY 40475 800-463-8722 www.holtequipment.net

1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 Fax: 701-282-3636

1929 E. Madison Ave. Mankato, MN 56001 507-387-7376 Fax: 507-387-7399 901 Parker Ave. W. Dassel, MN 55325 877-570-2740 www.farmriteequip.com

2216 N. Greenbay Rd. Waukegan, IL 60087 847-336-1205 10351 W. Laraway Rd. Frankfort, IL 60423 815-464-6650 27939 W. Concrete Dr. Ingleside IL 60041 815-363-4100 www.burrisequipment.com

Page 44 â&#x20AC;˘ May 26, 2012 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ Truck & Trailer Section â&#x20AC;˘ Construction Equipment Guide

5($'< 72 6+,1("

ALL NEW TRADESMAN PACKAGE!!

(YHU\ GD\ LV DQRWKHU RSSRUWXQLW\ WR GR LW ULJKW WKH Âż UVW WLPH 8VH PRUH EUDLQ WKDQ PXVFOH ([KLELW WKH ÂłVNLOOÂ´ LQ VNLOOHG WUDGHVPDQ <HS LWÂśV WLPH WR VKLQH $QG QRWKLQJ VKLQHV EULJKWHU WKDQ WKH GXUDELOLW\ VHFXULW\ DQG RUJDQL]DWLRQ RI :($7+(5 *8$5'Â&#x160; 7UXFN 6WRUDJH (TXLSPHQW ,W ZRUNV DV KDUG DV \RX GR DQG MXVW PLJKW EH DV JRRG ORRNLQJ )RU PRUH LQIRUPDWLRQ YLVLW

ZZZ ZHDWKHUJXDUG FRP RU FDOO

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • May 26, 2012 • Page 45

Lupient Chevrolet of Bloomington is your Commercial Vehicle Headquarters. VEHICLES

PARTS & SERVICE

Any New Silverado In Stock Unit. $500 below factory invoice at Lupient Chevrolet in Bloomington

We Do D.O.T. Inspections up to 1.5 Ton 3 Million Dollar Parts Inventory 2 Parts Locators to Eliminate Costly Down Time

#1 Upper Midwest Volt Dealer New 2012 Chevrolet Volt 5Dr. HB Lupient Price $40,322 Loyalty Cash -$250 Sale Price $39,872 New 2012 Chevrolet Express Cargo Van MSRP $27,125 Lupient Price $25,242 Sale Price $23,742

Special Pricing on Engines, Transmissions and Transfer Cases all with 5 Year 100,000 Warranty. Parts Delivery to any “Job Site” in the Metro Ship to all 48 States

2012 Chevrolet Express Cutaway Van Auto, RWD 3500 139” WB MSRP $35,361 Sale Price $30,900

Ask About our Great Wholesale Discounts! Full Service Body Shop & Glass Repair HD Trucks in Stock Up to $8000 off MSRP while supplies last. All rebates to dealers

Hours to Serve You Monday-Thursday Friday Saturday

6AM - 6PM 6AM - 6PM 7:30AM - 12 Noon

1601 Southtown Drive • Bloomington, MN 55431

www.lupientchev.com Please contact John Zadurski at (952) 884-3333 or (952) 886-9430 Email: johnza@lupient.com

Parts Direct (952) 887-9326

Service Direct (952) 887-9325

Toll Free (866) 990-3763

Page 46 • May 26, 2012 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Felling’s FT-80-3 OTR Trailer Gets Galvanized at AZZ Felling Trailers’ FT-80-3 OTR is the largest trailer ever galvanized at AZZ Galvanizing Services plant in Winsted, Minn. The customer is using the trailer to haul a variety of equipment each month of the year. Even with proper preparation and premium paint, the trailer may eventually corrode due to salt and calcium chloride exposure on roads. Thus, the customer chose to have it galvanized, which protects it from corrosion. AZZ Galvanizing Services, America’s largest galvanizer, has been in business for more than four decades and has grown to a network of 34 locations. AZZ’s goal is to help its customers assure the function, durability and safety of their products for generations. Felling Trailers’ design team fully collabo-

rated with the galvanizers at AZZ to ensure proper venting and airflow in pockets before galvanizing the trailer. “The cooperation between Felling and AZZ really made this project a success,” said Jon Benson, of AZZ Galvanizing Services. After the trailer was manufactured at Felling Trailers, it was brought to AZZ Galvanizing Services’ Winsted location for a process called “hot-dip galvanizing.” First, it was thoroughly inspected for drainage and venting requirements. Next, the trailer is cleaned in three steps: it is totally immersed in a hot alkali solution to remove organic compounds; then acid pickling removes scale; and lastly fluxing eliminates oxides from the surface of the steel and promotes the proper metallurgical bonding of the zinc in the next step. The trailer is then completely submerged in a bath of molten zinc until it reaches a

This FT-80-3 OTR was galvanized at AZZ Galvanizing Services.

temperature of approximately 840F. At that point, the zinc reacts with the steel to form zinc/iron intermetalic layers on all surfaces, inside and out. After cooling, the galvanized trailer is cleaned, weighed and then thoroughly inspected for coating thickness, appearance and compliance with applicable ASTM (formerly known as the American Society for Testing and Materials) specifications. Calibrated instrumentation ensures efficient inspection. The FT-80-3 OTR offers the following standard features: • 5 ft. (1.5 m) Self cleaning angle iron beavertail • 5 ft. x 20 in. (1.5 m by 51 cm) self cleaning angle iron spring assist ramps • Toolbox with cover recessed in upper deck •

48 in. (122 cm) King pin height • 8 in. (20 cm) structural channel side rails • Pierced 6 in. (15 cm) I-beam crossmembers on 16 in. (40.6 cm) centers • Tread plate covered wheels • Heavy, robust design • 16 Bent D-rings Keeping the focus on user/operator customization, Felling built this particular customer’s trailer with the following optional features per the customer’s request: • Three section hydraulic ramp from the main deck to the top deck • 42 in. wide by 11 ft. long (107 cm by 3 m) wood inlaid bi-fold ramps • Chain slots every 24 in. (61 cm) running the full length down center of the main deck • Stainless steel underbody toolboxes (1 each side) • 8 ft. (2.4 m) long underbody mesh storage rack for timbers etc. • 20,000 lb. (9,072 kg) Hydraulic Winch mounted in upper deck • Fully galvanized All of the hydraulic functions are operated individually by a three spool valve on the trailer powered by the truck’s PTO driven hydraulic pump. For more information, visit www.felling.com.

Hendrickson Suspension Training to Be Held Near Philly Hendrickson has scheduled its next round of technical suspension training for the heavy-duty transportation industry with its ninth session of the Hendrickson Vehicle Suspension Institute (HVSI). Hundreds of technicians from the United States and Canada from independent repair facilities, fleets and OE service dealerships have participated in the past eight installments. These training sessions have taken place previously in Chicago, Canton, Toronto, Montreal, Calgary and Los Angeles. The HVSI program provides technicians as well as parts and service personnel with a basic orientation for the recommended installation, service, maintenance and repair procedures for newer models of Hendrickson truck and trailer suspensions. Two sessions will be held from June 19, 2012, through June 22, 2012, at the Universal Technical Institute (UTI) in Sessions will be hands-on training covering the PRIMAAX EX vocational truck air suspension and HAULExton, Pa. These two sessions MAAX rubber block truck suspension, and suspension system performance analysis.

will be hands-on training covering the PRIMAAX EX vocational truck air suspension and HAULMAAX rubber block truck suspension, and suspension system performance analysis. Hendrickson regional service managers and technical support managers conduct the training sessions which are spread over a day and a half. Additional sessions are planned in 2012 and will be announced at a future date. “The overwhelming feedback on our HVSI program has been outstanding,” said David McCleave, aftermarket/technical services director of the Hendrickson truck commercial vehicle systems. “It is our objective to train and educate as many technicians and parts professionals as possible to keep our customers’ trucks and trailers on the road and in optimum condition.” For more information, call 630/910-2836 or visit www.hendrickson-intl.com.

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • May 26, 2012 • Page 47

L E Z B E F R F ’S E

R CALL FO CING PRI SPECIAL -AGC-NAHB LA FOR MN BERS ON MEM HICLES VE SELECT

LAKEVILLE, MN CHEVROLET

A POWERFUL WORKFORCE

Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications. As a Chevy Business Central dealer, we’re all business.

2012 ext cab 4x2 , 9,500 gvw, 8 ft asoria fiberglass service body, (no rust). promo unit, call for pricing

2012 2500 expres vans, from $24,999.

15 ft baybridge, from $27,999.00.

2012 k3500 4x2 chassis 84 c/a, gas, posi, sno prep, from $26,999.

2012 k2500, ready for plow, call for pricing.

hard to find 2012 "red" k2500 crew cab 4x4 long box, gas, lt, from $37,499.

2012 k35 4x4, 84 c/a, gas, well equipped, from $29,495

2012 1500 ext cab 4x2 "LT" 4.8 v8, posi, trailer pkg, $24,599.

2012 c1500 wt 4x2 ac, cruise, from $17,899.

COMMERCIAL HEADQUARTERS Jeff Belzer Chevrolet, 50 & Cedar, BX 965 Lakeville, MN Please Call the Commercial Dept, 1-877-671-8226 OR 952-469-4444 All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change George Miller 952-469-6820 gmiller@jeffbelzer.com

Page 48 • May 26, 2012 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • May 26, 2012 • Page 49

WARRANTY

SOUTHERN RUST FREE TRUCK

2011 Chev G3500

4x4, Cube Van, 6.0 V8 Gas, Auto, A/C, 15’ Van, 29,000 Miles $26,950

2009 Ford F250

Extended Cab, 2008 Ford E350 Hi Cube 5.4 4x2, 5.4 V8, Automatic, Air Condition- V8, Automatic, A/C, Power Windows, ing, Service Body, 75,000 Miles, Rust Power Locks, Cruise, 15’ Van, Walk Free Southern Truck $22,500 Thru, 34,000 Miles $21,500

Crewcab, 4x4, 6.4 Turbo Dsl, Auto, A/C, 10’ Flatbed, 69,000 Miles. Southern Rust Free Truck. Bal of Eng Warranty $32,500

Turbo Diesel, Automatic, A/C, Cruise, Tow Package, 74,000 Miles. Extended Warranty til 200,000 Miles $33,950

WARRANTY

2008 Ford F350

2008 Ford F350 Crewcab, 4x4, 6.4

4x4

5.4 V8, Automatic, Air Conditioning, 8’ Fiberglass Service Body, 40,000 Miles $21,500

WARRANTY

2008 Ford F550 4x4 6.4 Turbo

2008 Ford F350 4x2, 5.4 V8, Au- 2008 Ford F350

Diesel, Automatic, Air Conditioning, 11’ Flatbed, 60,000 Miles. Balance of Factory Warranty $31,500

tomatic, Air Conditioning, 12’ Steel Flatbed, Southern Rust Free Truck $24,500

4x4, 6.4 Turbo Diesel, Automatic, Air Conditioning, 81,000 Miles. Balance of Factory Warranty. Extended Warranty $29,950

4x2, 6.4 Powerstroke Diesel, Auto, A/C, 12’ Flatbed, 47,000 Miles. Balance of Factory Warranty $27,950

2006 Chev K3500 4x4, Crew Cab, 2005 GMC C4500 6.6 Duramax,

Diesel, Allison Auto, 19000# GVW, A/C 11’ Steel Bed, 68,000 Miles, Southern Rust Free Truck $29,500

6.0 V8 Gas, Auto A/C, 8’ Service Body, Rust Free Southern Truck, 55,000 Miles $25,500

Allison Auto, A/C, 84” CA, Installing New Rebuilt Engine, 100,000 Mile Warranty, 96,000 Miles $25,950

RUST FREE

VERY LOW MILES

2005 Ford E350 Hi-Cube Van

2005 Isuzu NQR 175hp Diesel, Automatic, A/C, 17,950# GVW, 14’ Flatbed, 112,000 Miles. Southern Rust Free Truck $25,950

2001 Isuzu FRR

200 HP Turbo Diesel, Allison, Auto, A/C, 19500# GVW, New 16’ Steel Flatbed, 147,000 Miles, Southern Rust Free Truck

$21,500

2001 Sterling Acterra

“Lo Pro”, Cummins, 205hp, Allison Automatic, Air Conditioning, 195,000# GVW, 16’ Flatbed $24,500

2005 Chev K3500 4x4, 6.0 V8- 2005 Isuzu NQR Turbo Diesel, Au-

2005 Ford E450 V10, Automatic, Air Conditioning, 14,000# GVW, 16’ Van, 51,000 Miles $17,500

Gas, Auto, A/C, New 12’ Flatbed, Used tomatic, Air Conditioning, 17,950# GVW, “Installing New Rolloff System” Hoist, 80,000 Miles $22,500 READY SOON RUST FREE

Crewcab, Cat 3126, 7 Speed, A/C, Power Windows, Power Locks, Cruise, 26,000# GVW, 113,000 Miles, 19’ Flatbed $23,500

1999 Ford F350 4x4, 5.4 V8 Gas, Auto, A/C, New Tires, Rust Free Southern Truck, 133,000 Miles, CLEAN! $11,950

1998 Ford E450 KUV

$6,950

2005 Sterling L9500 M Benz 350hp, 10 Speed, Air Ride Susp., Diff. Lock, Alum. Tanks, New 16’ Contractor Dump, Hoist, “AR400 Floor, HD Hitch w/Air Lines, Much More. 45,000 Miles $53,750

2005 Freightliner M2 “Recent Engine Work” Cat C7-210hp, 6-Speed, 33,000# GVW, Air Ride Suspn, A/C, Like New Tires, Ex-Penske Truck, New $21,950 Rings, Clutch, Brakes

2005 Frieghtliner M2 Tractor

2004 GMC C5500 6.6 Duramax Diesel, Allison Auto, 19500 #GVW, A/C, Cruise 120” CA, 83,000 Miles $26,500

2004 Sterling Tractor Cummins 330hp, 10-Speed, Air Ride Suspension, 12000# Front Axle, 34700# GVW, A/C, Alum Tanks, New Tires, 297,000 Miles $25,950

2000 Ford F650

7.3 Powerstroke Diesel, Automatic, 12’ Covered Service Body, 171,000 Miles

2005 IH 4400 Tractor DT 570-310hp, Allison Auto, 12000# Front Axle, A/C, Cruise, Power Windows, Power Locks, Excellent Tires, Very Nice $31,500

NEW ENGINE

2007 GMC C5500 6.6 Duramax 2006 Chev C3500

Auto, A/C, New 12’ Flatbed, Used

16’ FRP, 5.4 V8, Automatic, Air Conditioning, Rust Free, 105,000 Miles $12,500

2002 IH 4200 “Lo Pro” 444.E IH Diesel- (7.3) Allison Auto, A/C, 19000 #GVW 134,000 Miles, Southern Rust Free Truck $14,950

AUTOMATIC

2008 Ford F350

4x4, 6.4 Turbo Diesel, Automatic, Air Conditioning, 11’ Flatbed, 43,000 Miles, Factory Warranty $29,950

WARRANTY DURAMAX

Duramax Diesel, Automatic, Air Conditioning, 11’ Service Body, 70,000 Miles. Rust Free Southern Truck $22,500

200hp Turbo Dsl., Allison Auto, A/C, 19,500# GVW, 12’ Dump Body. $27,500

SOUTHERN TRUCK

4x4

2008 Ford F350

tomatic, Air Conditioning, 12’ Flatbed & Hoist, 47,000 Miles $21,500

2003 Isuzu FRR

WARRANTY

SOUTHERN TRUCK

2008 Ford F250 4x4

2003 Chev. C3500 4x2, 6.0 V8, Au-

If you don’t see what you want - call us we’ll help you find it!

Cat C7- 275hp, 9-Speed, 12000# front, New Tires, Alum Wheels, Air Ride Suspension, Chrome Bumper, Sharp!!, 196,000 Miles

$28,950

Auto, A/C, New 12’ Flatbed, Used READY TO MOUNT BODY

2004 Chev. C7500

Cat 3126, 207hp, Allison Automatic, Under CDL, Air Conditioning, Cruise, 24’ Van, 118,000 Miles $22,500

2004 Ford F750 Cummins 245hp, 7 Speed, 33,000# GVW, Air Brakes, A/C, Cruise, New Clutch, 91,000 Miles, 27’ Flatbed $27,500

AUTOMATIC

Cat, Diesel, 6 Speed, 26,000# Under CDL, Cat 3126 250hp, Allison, Auto, 3060p, Spring SusAir Brakes, A/C, Cruise Control, pension, 12000 Front Axle, Southern Rust Free Trucks, 3 to choose from: 106K, 119K, 140K 140,000 Miles COMING SOON $22,950

2000 Sterling Tractor Cat C12,

1997 Ford L8500

1994 Ford LTS 8000

2004 Freightliner M2

2002 Sterling Acterra Tractor

410hp, 10-Speed, Air Ride, Suspension, 12000# Front Axle, A/C, New Rear Tires, 344,000 Miles $19,950

AUTOMATIC

COULD ADD HOIST

2004 Ford F550

4x2, V10, Automatic, A/C, 15,000# GVW, New Tires, 11’ Flatbed, Southern Rust Free Truck, 55,000 Miles $17,950

2003 Chev. C3500 4x2, 6.0 V8, Automatic, Air Conditioning, 12’ Flatbed, 47,000 Miles $19,950

2003 Ford F550

4x4,V10, Automatic, Air Conditioning, 17,500# GVW, New 11’ Dump, Hoist, Boss V-Plow, 65,000 Miles $28,500

2003 Freightliner FL50

3126 Cat, 190hp, 6 Speed, Air Conditioning, 16’ Flatbed, 166,000 Miles $21,950

Please Call Before You Come!

CHECK OUT OUR WEBSITE

www.mykwtrucks.com

2003 Sterling Acterra “Lo Pro” Cat 3126, 210hp, Allison Automatic, Air Conditioning, Like New Tires, 19,000# $26,500 GVW, 115,000 Miles

800-658-2324 ASK FOR

REDWOOD FALLS, MN

DREW LARSON OR RON KOHLS

Dealer not responsible for misprints

1999 Volvo WG64 Quad Axle, Cummins ISM, 370hp, 8LL, 20000# Front, 40000# Rear, Chalmers Suspension, 264” WB, Engine Brakes, 4.89 Ratio, 2 Steerable Axles, Double Frame, $37,500 Each Matched Pair

1999 Ford F700 Cummins, 190hp, Automatic, A/C, 26000# GVW, 178,000 Miles, Rust Free Truck $15,950

Cummins 310hp, 9-Speed, Air Ride, Sharp Truck! 323,000 Miles $15,950

1997 Ford L8000

Cat 190hp, 6 Speed, 26,000# GVW, Air Brakes, Air Conditioning, 61,000 Actual Miles

800-658-2324

Please Call Before You Come!

CHECK OUT OUR WEBSITE

www.mykwtrucks.com

$14,950

Tri-Axle, 8.3 Cummins 275 hp, 10-Speed 18,000# front, 40,000# Rear Hendrickson Spring, 210,000 Miles Matched Pair $18,500

ASK FOR

REDWOOD FALLS, MN

DREW LARSON OR RON KOHLS

Dealer not responsible for misprints

Page 48 • May 26, 2012 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • May 26, 2012 • Page 49

WARRANTY

SOUTHERN RUST FREE TRUCK

2011 Chev G3500

4x4, Cube Van, 6.0 V8 Gas, Auto, A/C, 15’ Van, 29,000 Miles $26,950

2009 Ford F250

Crewcab, 4x4, 6.4 Turbo Dsl, Auto, A/C, 10’ Flatbed, 69,000 Miles. Southern Rust Free Truck. Bal of Eng Warranty $32,500

Turbo Diesel, Automatic, A/C, Cruise, Tow Package, 74,000 Miles. Extended Warranty til 200,000 Miles $33,950

WARRANTY

2008 Ford F350

2008 Ford F350 Crewcab, 4x4, 6.4

4x4

5.4 V8, Automatic, Air Conditioning, 8’ Fiberglass Service Body, 40,000 Miles $21,500

WARRANTY

2008 Ford F550 4x4 6.4 Turbo

2008 Ford F350 4x2, 5.4 V8, Au- 2008 Ford F350

Diesel, Automatic, Air Conditioning, 11’ Flatbed, 60,000 Miles. Balance of Factory Warranty $31,500

tomatic, Air Conditioning, 12’ Steel Flatbed, Southern Rust Free Truck $24,500

4x4, 6.4 Turbo Diesel, Automatic, Air Conditioning, 81,000 Miles. Balance of Factory Warranty. Extended Warranty $29,950

4x2, 6.4 Powerstroke Diesel, Auto, A/C, 12’ Flatbed, 47,000 Miles. Balance of Factory Warranty $27,950

2006 Chev K3500 4x4, Crew Cab, 2005 GMC C4500 6.6 Duramax,

Diesel, Allison Auto, 19000# GVW, A/C 11’ Steel Bed, 68,000 Miles, Southern Rust Free Truck $29,500

6.0 V8 Gas, Auto A/C, 8’ Service Body, Rust Free Southern Truck, 55,000 Miles $25,500

Allison Auto, A/C, 84” CA, Installing New Rebuilt Engine, 100,000 Mile Warranty, 96,000 Miles $25,950

RUST FREE

VERY LOW MILES

2005 Ford E350 Hi-Cube Van

2005 Isuzu NQR 175hp Diesel, Automatic, A/C, 17,950# GVW, 14’ Flatbed, 112,000 Miles. Southern Rust Free Truck $25,950

2001 Isuzu FRR

200 HP Turbo Diesel, Allison, Auto, A/C, 19500# GVW, New 16’ Steel Flatbed, 147,000 Miles, Southern Rust Free Truck

$21,500

2001 Sterling Acterra

“Lo Pro”, Cummins, 205hp, Allison Automatic, Air Conditioning, 195,000# GVW, 16’ Flatbed $24,500

2005 Chev K3500 4x4, 6.0 V8- 2005 Isuzu NQR Turbo Diesel, Au-

2005 Ford E450 V10, Automatic, Air Conditioning, 14,000# GVW, 16’ Van, 51,000 Miles $17,500

Gas, Auto, A/C, New 12’ Flatbed, Used tomatic, Air Conditioning, 17,950# GVW, “Installing New Rolloff System” Hoist, 80,000 Miles $22,500 READY SOON RUST FREE

Crewcab, Cat 3126, 7 Speed, A/C, Power Windows, Power Locks, Cruise, 26,000# GVW, 113,000 Miles, 19’ Flatbed $23,500

1999 Ford F350 4x4, 5.4 V8 Gas, Auto, A/C, New Tires, Rust Free Southern Truck, 133,000 Miles, CLEAN! $11,950

1998 Ford E450 KUV

$6,950

2005 Sterling L9500 M Benz 350hp, 10 Speed, Air Ride Susp., Diff. Lock, Alum. Tanks, New 16’ Contractor Dump, Hoist, “AR400 Floor, HD Hitch w/Air Lines, Much More. 45,000 Miles $53,750

2005 Freightliner M2 “Recent Engine Work” Cat C7-210hp, 6-Speed, 33,000# GVW, Air Ride Suspn, A/C, Like New Tires, Ex-Penske Truck, New $21,950 Rings, Clutch, Brakes

2005 Frieghtliner M2 Tractor

2004 GMC C5500 6.6 Duramax Diesel, Allison Auto, 19500 #GVW, A/C, Cruise 120” CA, 83,000 Miles $26,500

2004 Sterling Tractor Cummins 330hp, 10-Speed, Air Ride Suspension, 12000# Front Axle, 34700# GVW, A/C, Alum Tanks, New Tires, 297,000 Miles $25,950

2000 Ford F650

7.3 Powerstroke Diesel, Automatic, 12’ Covered Service Body, 171,000 Miles

2005 IH 4400 Tractor DT 570-310hp, Allison Auto, 12000# Front Axle, A/C, Cruise, Power Windows, Power Locks, Excellent Tires, Very Nice $31,500

NEW ENGINE

2007 GMC C5500 6.6 Duramax 2006 Chev C3500

Auto, A/C, New 12’ Flatbed, Used

16’ FRP, 5.4 V8, Automatic, Air Conditioning, Rust Free, 105,000 Miles $12,500

2002 IH 4200 “Lo Pro” 444.E IH Diesel- (7.3) Allison Auto, A/C, 19000 #GVW 134,000 Miles, Southern Rust Free Truck $14,950

AUTOMATIC

2008 Ford F350

4x4, 6.4 Turbo Diesel, Automatic, Air Conditioning, 11’ Flatbed, 43,000 Miles, Factory Warranty $29,950

WARRANTY DURAMAX

Duramax Diesel, Automatic, Air Conditioning, 11’ Service Body, 70,000 Miles. Rust Free Southern Truck $22,500

200hp Turbo Dsl., Allison Auto, A/C, 19,500# GVW, 12’ Dump Body. $27,500

SOUTHERN TRUCK

4x4

2008 Ford F350

tomatic, Air Conditioning, 12’ Flatbed & Hoist, 47,000 Miles $21,500

2003 Isuzu FRR

WARRANTY

SOUTHERN TRUCK

2008 Ford F250 4x4

2003 Chev. C3500 4x2, 6.0 V8, Au-

If you don’t see what you want - call us we’ll help you find it!

Cat C7- 275hp, 9-Speed, 12000# front, New Tires, Alum Wheels, Air Ride Suspension, Chrome Bumper, Sharp!!, 196,000 Miles

$28,950

Auto, A/C, New 12’ Flatbed, Used READY TO MOUNT BODY

2004 Chev. C7500

Cat 3126, 207hp, Allison Automatic, Under CDL, Air Conditioning, Cruise, 24’ Van, 118,000 Miles $22,500

2004 Ford F750 Cummins 245hp, 7 Speed, 33,000# GVW, Air Brakes, A/C, Cruise, New Clutch, 91,000 Miles, 27’ Flatbed $27,500

AUTOMATIC

2000 Sterling Tractor Cat C12,

1997 Ford L8500

1994 Ford LTS 8000

2004 Freightliner M2

2002 Sterling Acterra Tractor

410hp, 10-Speed, Air Ride, Suspension, 12000# Front Axle, A/C, New Rear Tires, 344,000 Miles $19,950

AUTOMATIC

COULD ADD HOIST

2004 Ford F550

4x2, V10, Automatic, A/C, 15,000# GVW, New Tires, 11’ Flatbed, Southern Rust Free Truck, 55,000 Miles $17,950

2003 Chev. C3500 4x2, 6.0 V8, Automatic, Air Conditioning, 12’ Flatbed, 47,000 Miles $19,950

2003 Ford F550

4x4,V10, Automatic, Air Conditioning, 17,500# GVW, New 11’ Dump, Hoist, Boss V-Plow, 65,000 Miles $28,500

2003 Freightliner FL50

3126 Cat, 190hp, 6 Speed, Air Conditioning, 16’ Flatbed, 166,000 Miles $21,950

Please Call Before You Come!

CHECK OUT OUR WEBSITE

www.mykwtrucks.com

2003 Sterling Acterra “Lo Pro” Cat 3126, 210hp, Allison Automatic, Air Conditioning, Like New Tires, 19,000# $26,500 GVW, 115,000 Miles

800-658-2324 ASK FOR

REDWOOD FALLS, MN

DREW LARSON OR RON KOHLS

Dealer not responsible for misprints

1999 Volvo WG64 Quad Axle, Cummins ISM, 370hp, 8LL, 20000# Front, 40000# Rear, Chalmers Suspension, 264” WB, Engine Brakes, 4.89 Ratio, 2 Steerable Axles, Double Frame, $37,500 Each Matched Pair

1999 Ford F700 Cummins, 190hp, Automatic, A/C, 26000# GVW, 178,000 Miles, Rust Free Truck $15,950

Cummins 310hp, 9-Speed, Air Ride, Sharp Truck! 323,000 Miles $15,950

1997 Ford L8000

Cat 190hp, 6 Speed, 26,000# GVW, Air Brakes, Air Conditioning, 61,000 Actual Miles

800-658-2324

Please Call Before You Come!

CHECK OUT OUR WEBSITE

www.mykwtrucks.com

$14,950

Tri-Axle, 8.3 Cummins 275 hp, 10-Speed 18,000# front, 40,000# Rear Hendrickson Spring, 210,000 Miles Matched Pair $18,500

ASK FOR

REDWOOD FALLS, MN

DREW LARSON OR RON KOHLS

Dealer not responsible for misprints

Page 50 • May 26, 2012 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Mack Trucks Names TransEdge 2011 Distributor of the Year Mack Trucks named TransEdge Truck Center of Pittsburgh, Pa., its 2011 North American Distributor of the Year. The annual award recognizes the top-performing distributors within Mack’s North American dealer network. Selection criteria include sales, facilities, personnel, service, parts, general management, customer satisfaction and community service. TransEdge owners Bob and Judy Dwyer opened the Pittsburgh location in 2007 and continue to invest heavily in their facilities and staff as they focus on the TransEdge experience and how to best serve their customers. TransEdge Truck Center also operates locations in Allentown, Pa., and Pottsville, Pa. Mack also named 2011 winners for each of its U.S. regional sales divisions: • Northeast Region: TransEdge Truck Center, Pittsburgh, Pa. • Southeast Region: Transource Inc., Greensboro, N.C. • Central Region: Mack Sales & Service

Center of Decatur Inc., Decatur, Ill. • Southwest Region: East Texas Mack, Longview, Texas • Western Region: TEC of California, Fontana, Calif. • Canada Region: Redhead Equipment, Regina, Saskatchewan Parish Truck Sales of New Orleans, La., received the North American Used Truck Distributor of the Year award. Chicago Mack Sales and Service of Summit, Ill., was named Mack Leasing System North American Distributor of the Year. “We’re very proud of these award winners and the entire Mack dealer network for their dedication to service and vast product knowledge,” said Kevin Flaherty, president, Mack Trucks North American Sales & Marketing. “Our distributors continue to do an excellent job developing solutions for our diverse customer base and delivering topnotch service and support.” For more information, visit www.macktrucks.com.

Vander Haags,Inc. ’

Since 1939

866-634-5030

www.vanderhaags.com

Truck & Trailer Sales We carry all the names you trust!

Parts & Equipment Sales

Service & Equipment Installation

5 Locations to serve you in Spencer, Des Moines & Council Bluffs, IA & Sioux Falls, SD

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • May 26, 2012 • Page 51

Vermeer Sales & Service

Farm-Rite Equipment Inc.

1675 126th St. West Burnsville, MN 55337 952-890-6144 Fax: 952-882-2980 www.vermeerofminnesota.com

901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857 www.farmriteequip.com

Midwest Trailers Plus, Inc.

K.C. Bobcat

548 29th St. West Des Moines, IA 50265 515-223-8463 Toll Free: 888-560-2787 Fax: 515-223-6446 www.midwesttrailersplus.com

2209 W. 40 Highway Blue Springs, MO 64015 800-697-4228 816-229-7631 Olathe, KS 800-598-4228 Platte City, MO 800-984-3001

McCann Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 • Fax: 630-627-8711 Big Rock 47W247 US Highway 30 Big Rock, IL 60511 630-556-3111 • Fax: 630-556-3749 Bolingbrook 250 East Frontage Road Bolingbrook, IL 60440 630-739-7770 • Fax: 630-739-7699 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 • Fax: 312-421-3502

Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 • Fax: 708-597-9945 McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 • Fax: 815-385-2975 Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 • Fax: 219-865-0269 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 • Fax: 847-526-9448 www.McCannOnline.com

Titan Machinery Shakopee Division 6340 Hwy 101 Shakopee, MN 55379 952-445-5400 • 800-795-9274 Fax: 952-445-0365 Duluth Division 4311 Haines Rd. Hermantown, MN 55811 218-727-3038 • 800-795-0117 Fax: 218-727-2827 Rogers Division 14375 James Rd. Rogers, MN 55374 763-428-5099 • Fax: 763-428-5051 Industrial Division N1626 Wuensch Rd. LaCrosse, WI 54601 608-788-1025 • 800-780-1025 Fax: 608-788-1027

Page 52 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

New Bridge Over Elk River Highlights Hwy. 23 Expansion EXPANSION from page 1

Work on this 8-mi. (13 km) stretch of expressway began in July 2011 with construction of the new lanes by prime contractor Hoffman Construction of Black River Falls, Wis. Rick Beckes, project supervisor with Mn/DOT’s District 3 office, explained that the main focus in 2011 was to construct the embankment for alignment of the two new lanes. A settlement monitoring system was installed by the Elk River where it crosses Highway 23 on the west end of the project, Beckes said. The monitoring system includes settlement plates and piezometers to monitor the rate of settlement. A surcharge was built to its full width and elevation and was left to sit through the four or five months of winter to ensure there was no further settlement once traffic is routed onto the road. Work is continuing in 2012 with the reconstruction of the existing two lanes. The bid called for concrete pavement, which was a change from the existing surface of bituminous over concrete. The existing two-lane roadway was milled and overlaid. Crews placed 127,674 dowel bars for the concrete paving. Intersections were realigned at several roadways, including 65th Avenue, Benton County Road 25, 85th Avenue and Benton County Road 83, and Benton County Road 61, Benton County Road 62 and Benton County Road 4. Length of the reconstruction at the realignments varied based on the change in profile but averaged one-quarter of a mile on either side, Beckes said. A new bridge is being constructed during 2012 over the Elk River to accommodate the new westbound lanes. It sits adjacent to the existing bridge that will be incorporated into the new roadway. The new bridge will

require about 539 cu. yds. (412 cu m) of structural concrete. Work in 2012 also includes adding turn lanes at the intersections of Highway 23 and Highway 25 in Foley, and reconstructing the Glen/Sheridan frontage road in the Industrial Park. Installation of city curbs, gutters, storm/sanitary sewers, water mains and other utilities in Foley is in full swing. Resurfacing the two-lane section of Highway 23 from Highway 25 to the east limits of Foley will also take place in 2012, along with the installation of a new pipe for the storm water retention pond, which will be constructed northeast of the highway 23/25 intersection. Favorable weather and dryer conditions last fall helped keep the $26 million project on schedule and reduce the overly wet soil conditions that are prone to this area, Beckes said. “There is an area around Foley that is notorious for being wet and with the dry weather it wasn’t as much of an issue as we had anticipated. There were a couple of areas where muck was excavated and replaced with granular material.” A wide range of equipment is being used, including off-road trucks, end dump trucks, side dump trucks, 631 Caterpillar scrapers, and pans are being pulled behind agricultural tractors, Beckes said. On the other hand, if the soil is too dry water will need to be added to achieve optimal densities, “but we have control over that,” Beckes said. The anticipated completion date for the project is Nov. 1, 2012, weather permitting. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Work on this 8-mi. (13 km) stretch of expressway began in July 2011 with construction of the new lanes by prime contractor Hoffman Construction of Black River Falls, Wis.

Pages 53-65

Crushing, Screening & Recycling Section Superior Introduces Track-Mounted Mobile Pivot Base Superior Industries has a new option for maximum conveyor mobility. The track-mounted mobile pivot base, when applied with the TeleStacker conveyor (or other conveyor types) delivers free-ranging conveyor movement for increased on-site or transfer point mobility; or for increased flotation and total mobility on low pressure soils — all while reducing the need for haul trucks and loaders, additional labor and material handling, or other costly loading and unloading systems. Requiring no external power, the mobile pivot base is selfcontained and powered by an onboard 48 hp (35.7 kW) Deutz diesel engine with a 30-gal. (113.5 L) fuel and hydraulic oil tank. Featuring wireless remote control operation, the unit travels on two heavy-duty, hydraulic-drive rubber tracks. For greater stability and maximum flotation, the tracks are almost 9-ft. (2.7 m) in length, more than 40-percent longer than comparable units. An ability to maximize speeds for either the lower or higher range, allows precise control to link up to a feed point, or quicker travel from point to point within the site, according to the manufacturer. The mobile pivot base is engineered with a two-axis gim-

The track-mounted mobile pivot base, when applied with the TeleStacker conveyor delivers free-ranging conveyor movement for increased on-site or transfer point mobility.

bal, which provides maximum stability and rotational freedom on uneven ground or rugged terrain, while eliminating any stress to the conveyor structure and frame. The new track-mounted mobile pivot base delivers increased mobility in a variety of applications and industries — and certainly anywhere where low pressure soils require greater flotation and traction. The unit is ideal for the optimum mobility desired in gold and copper heap leach opera-

tions. For barge and ship load/unload operations, its transfer point mobility allows it to work in conjunction with a tripper system, thus eliminating the need for large stationary shiploader systems. It also is suitable for dirt moving applications, or for roller compacted concrete (RCC) site mobility. For more information, call 320/589-7085 or visit www.superior-ind.com.

Atlas Copco Introduces HB 4100 Heavy Breaker Atlas Copco’s addition to its heavy hydraulic breaker line, the HB 4100 has a service weight of 9,039 lbs. (4,100 kg) — designed for carriers in the 88,185- to 154,324-lb. weight class — but is as powerful as other, much heavier breakers, according to the manufacturer. “The improvement is considerable,” explained Keith Becker, Atlas Copco product development specialist of hydraulic breakers. “We were able to achieve doubledigit percentage increases in power and efficiency while holding on to our known reliability.” Reduced weight and better performance means that similar results can be achieved with a smaller hydraulic breaker. A lighter breaker also means that a smaller excavator can be used, saving both investment and operating costs. “The return on investment is many times greater than the pure acquisition costs. The

reduction of total cost of ownership conserves resources such as man hours and fuel. The HB 4100 does this with its durability and simple maintenance concepts,” Becker said. Another improvement to the HB 4100 hydraulic breaker is a guide system that makes the breaker more stable and resilient. “Hydraulic breakers are ultimately subjected to use under the most extreme conditions,” Becker added. “A new cover plate for the retaining bars offers more protection in the lower part of the breaker. This area receives the most wear and tear, especially on demolition jobs. The HB 4100 also has increased wear protection at the bottom of the case, which has proven its worth with all heavy hydraulic breakers from Atlas Copco.” The new HB 4100 also includes the following standard features of the Atlas Copco heavy hydraulic breaker series:

• The VibroSilenced system protects operators against noise and vibrations. • PowerAdapt switches the breaker off in the event of a hydraulic overflow. • AutoControl adjusts the blow frequency and blow energy to match the hardness of the material. • ContiLube II is an integrated, automatic lubrication system. • StartSelect allows the operator to influence the startup and shutdown behavior of the hydraulic breaker. • The optional DustProtector protects the lower part of the hydraulic breaker from dust and rock particles. The HB 4100 hydraulic breaker is suitable for secondary and primary rock breaking in quarries, demolition of concrete, steel and pavement, trenching, dredging, tunneling and foundation work. For more information, visit www.atlascopco.us.

Atlas Copco’s new HB 4100 hydraulic breaker.

Page 54 • May 26, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Company Focused on Being Green Way Ahead of Others Just on the outskirts of New York “Ultimately, our goal is to City is the town of North Bergen, have equipment that doesn’t N.J. the home of Eagle Recycling. break,” said Cejas. “But the Unless one’s property borders the reality is that because we vast construction and demolition work our equipment hard recycling center or works there, it and for long hours from the would be very easy to drive through day we purchase it until the North Bergen and not even know day it has 25,000+ hours on the company existed. While this its meter, eventually somemight be detrimental to many busithing is going to need to be nesses, for Eagle Recycling it’s a repaired. Therefore we look feather in its cap. very closely at ease of access “To run a recycling center for for maintenance purposes construction and demolition debris A variety of equipment is worked hard at Eagle Eagle Recycling is a full service, indoor con- and of course have to know and not have large dust plumes and Recycling, usually 15-16 hours per day from excava- struction and demolition recycling facility locat- that parts are readily availwheel loaders, skid steers and ed in North Bergen, N.J. noise drawing negative attention to tors, able when the need arises.” fork trucks to water trucks and the facility is something we take street sweepers. Once the LiuGong 856III essary to continue the con- loader proved itself on the job, the only lingreat pride in,” said Anthony versation,” said Cejas. Marangi, general manager of Eagle gering concern Eagle had was in relation to good working order, especialOf course a little name the availability of parts. Recycling. ly the equipment. Over the dropping alone was not Eagle Recycling was established in 2003 years we’ve owned many “With downtime being so critical to their going to make the sale on operation and LiuGong’s worldwide headby Nicholas Marangi, whose vision for the brands and types of equipLiuGong’s 856III wheel quarters being in Liuzhou, China, there was company was for it to become New Jersey’s ment. If it works we’re advoloader. It had to be some worry with regards to parts availabilipremier and greenest construction and dem- cates, if we have issues, we demoed, but more impor- ty,” said Sheehan. “Once they learned that olition recycling center. Today that vision is quickly get a replacement, tantly it had to produce in LiuGong not only had a U.S. headquarters in carried out by his cousin Anthony Marangi because downtime translates the harsh work environ- Houston, Texas, but nine additional suband long time operations manager Silvio into huge losses for our busiment where it would soon sidiary locations and parts depots strategicalCejas. When the company incorporated in ness.” spend its 16 hour days. The ly located throughout the world to keep their 2003, it began renting its current facility A variety of equipment is demo is what sold Eagle on customers’ machines up and running, the located at 4711 Dell Ave. in North Bergen. worked hard at Eagle the LiuGong wheel loader. 856III was sold. What started out as a demo Prior to Eagle’s acquisition of the building, it Recycling, usually 15-16 Eagle Recycling is cur“When Jersey Rents was used as a municipal recycling center, hours per day from excava- rently permitted to delivered the LiuGong machine, stayed on the job and continues to which primarily processed household waste. tors, wheel loaders, skid steers process up to 1,000 tons work 16 hours each day.” Since that time the facility has been com- and fork trucks to water trucks (907 t) of construction 856III wheel loader, we “To say we are pleased with this machine pletely reconfigured to suit the efficient pro- and street sweepers. That level and demolition debris per were all still a bit skepti- is an understatement,” said Marangi. cessing of dry construction and demolition of rigorous use along with the day. In order to reach cal,” said Marangi. “Then “Everything about it suits our operation perdebris such as wood, concrete, cardboard, harsh environment in which that level of throughput, we put one of our employ- fectly. Not only is it a workhorse designed drywall, tires, metal, plastic, construction the machinery works has the company employs ees into the operating seat for the toughest of environments, but it’s also and demolition fine and various types of Eagle on the market for new more than 50 people and and had him load, push and an exceptional value. The LiuGong 856III two shifts, six days climb the substantial and comes standard with a variety of equipment wire and cable. equipment on an ongoing runs a week. changing construction that is optional on competitive model “One of our biggest challenges when basis. Bill Sheehan, a sales debris dumped by contrac- machines. A standard reversible fan, was of starting out in 2003 was determining how to representative of Jersey Rents, found this out be the most efficient in the processing of the late one Friday afternoon when he stopped in tors throughout the day into the facility with particular interest to us. With the variety of various debris brought to our facility from on a random sales call. “When I pulled into it. It was a jaw dropping moment as we materials handled daily, from large trees to the time it’s weighed in at the scale, to where the Eagle parking lot, they were pretty much watched this new machine and its 220 horse- small debris that get airborne, the radiators and how its dumped, processed and of closing up for the week. I caught a glimpse power, 6-cyclinder engine push twice the on our equipment fill up quickly and frecourse recycled,” said Cejas. “Efficiency is of a wheel loader in action through the open- amount of material as our prior loader with- quently, so a reversible fan is a must or else an ongoing concern. We constantly assess ing of a door and began asking about its use out stopping. The power was phenomenal we constantly have to stop and clean out the our plant set-up, equipment and employees and lifecycle. That’s when I learned the cur- and the 856III quickly became the primary radiator or risk it overheating. The fan on the to ensure we are being efficient in our day- rent machine was five years old and in need workhorse of our operation. It climbed piles 856III does that work for us.” to-day operations. Small changes in efficien- of replacement, subsequently introducing of uneven debris effortlessly and didn’t Marangi couldn’t help but take notice flinch when quickly pushing or moving when his employees got excited about the cy allow us to provide our customers with Eagle to the name LiuGong.” competitive dumping rates, move more “When Bill first started talking to us about heavy loads with its standard 4.58 cubic yard company’s new LiuGong loader. material through our facility and of course to LiuGong, my initial reaction was absolutely bucket. When it was time to refuel, we “Our guys are quick to complain when became even more pleased with the recycle more.” they don’t like the equipment we’ve purnot. I didn’t want to risk production by takEagle Recycling is currently permitted to ing on a relatively unknown brand of equip- LiuGong 856III loader. The ease of access to chased or are unhappy with a machine’s perprocess up to 1,000 tons (907 t) of construc- ment. As he continued to talk, he mentioned the fuel tank allowed us to fill up and get formance, so I knew we were onto sometion and demolition debris per day. In order that LiuGong wheel loaders were powered back to work very quickly.” thing with LiuGong.” Because of the changing temperatures in to reach that level of throughput, the compa- by Cummins engines, had ZF transmissions When Eagle began shopping for a ny employs more than 50 people and runs and that the company manufactures and New Jersey throughout the year and the lim- replacement excavator 90 days later, it called two shifts, six days a week. ships over 50,000 units globally per year of ited air circulation inside the Eagle Jersey Rents to learn more about LiuGong’s “It’s a challenge to process nearly 1,000 their wheel loaders alone. That’s when my Recycling facility, the company has full time 936D to see if that too would be a good fit tons per day,” said Marangi. “In order to ears perked up. The knowledge that mechanics on staff ready to maintain or for its operation. While the 856III’s primary continually maximize production, every- LiuGong had partnerships with well-estab- repair equipment immediately when a fail- function is to push and load debris delivered thing about our operation needs to remain in lished suppliers gave me the confidence nec- ure occurs. see EAGLE page 60

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 26, 2012 • Page 55

High Torque = High Profits

The

is The Crambo

dual shaft shredder

world

getting

Atlas Copco— Your full-line hydraulic breaker source

greener

The Terminator single shaft shredder

The Topturn

compost turner

Dual Power = Low Cost Need a breaker? No matter the size, Atlas Copco has what you need.

The Cribus

Hybrid drum screen

The Multistar

Hybrid star screen

The Hurrikan

Hybrid wind sifter

p 720-890-9090 | f 720-890-5907 | e info@komptechusa.com

We make technology for a better environment, with performance and efficiency features others often imitate but never equal. Our build quality and innovations lead the industry, so you can lead yours.

Atlas Copco manufactures breakers for skid steers, backhoes and excavators with operating weights up to 300,000 pounds. t High power-to-weight ratio for big breaker power with less weight t Controls allow operator to optimize performance and maximize productivity t High efficiency saves fuel and reduces operating costs t Designed for easy maintenance to maximize uptime and extend service life Call us today for more information on how to decrease your total cost of ownership with Atlas Copco breakers 800-732-6762 www.atlascopco.us

w w w. k o m p t e c h u s a . c o m

Page 56 • May 26, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

CRUSHING EQUIPMENT, PARTS & SERVICE Terry Hennessey 800-845-9188 terry.hennessey@fabickcat.com

Fenton, Missouri 800-845-9188 www.fabickcat.com

Go to www.fabickcat.com for a complete listing and description of our new and used equipment.

Portable Screen Telsmith offers an array of inclined and horizontal portable screening plants that have been designed to meet the variety of challenges encountered in different applications. Whether you need the ruggedness required when scalping large stone, to the finesse necessary for finish sizing, Telsmith has an efficient portable solution to meet your site needs.

Model TJ3258 - Jaw Crusher Designed around the Telsmith 3258 hydraulic jaw crusher, the TJ3258 is specifically designed to deliver high production while processing hard, abrasive stone. With a large crusher gape and width, the 3258 processes larger feed and has greater crushing capacity than competitive models. The 3258 jaw also incorporates unique hydraulic features proven to reduce maintenance and downtime to an absolute minimum: • Hydraulic Adjustment: reduces maintenance through simple, fast push button controls. • Hydraulic Relief: lowers operating costs through tramp metal overload protection. • Hydraulic Chamber Clearing: safely clears the crusher in minutes for increased uptime.

Model TI6060 - Impact Crusher Featuring the heavy duty Telsmith PA6060 Primary Impact Crusher, this plant is engineered for maximum productivity while processing less abrasive quarried stone or concrete recycle. Capable of receiving 40” stone or 58" wide concrete slabs, the PA6060 has proven to be a dependable, low cost producer. Advanced hydraulic features built into the PA6060 reduce maintenance and downtime providing increased production: • Hydraulic Apron Adjustment: reduces maintenance through simple, fast push button controls. • Hydraulic Relief: lowers operating costs through tramp metal overload protection. • Hydraulic Tilt Feed Plate: safely clears bridging in minutes for greater uptime.

DID YOU KNOW? For over a hundred years, Telsmith has designed and manufactured in the United States of America.

Crushers should operate for decades. With that standard in mind, Telsmith designs, manufactures and services a range of jaw, cone and impact crushers as well as single-deck to quad-deck screens.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 26, 2012 • Page 57

TThe he ne new w LLokotrack okotrack LLT120 T120 T ja jaw w plant

Reliable R elia eliable ab crushing power power Thee Lokotrack LLT120, T120, Metso’s latest jaw plant, combines solid d exper e ience with a totally new way of thinking. The result esu ult is reliable crushing power and more uptime ffor or you. The dependable, all-new C120 jaw crusher, with its gen gener nerous 47 x 34" ffeed eed opening, boosts productivity in the toughest applications. Saffee and simple s to operate, compac com mp t and easy to transport. To lear le n more, contact a Metso ettso distributor near you.

E-mail: E-m mai minerals.nam@metso.com www ww.metso.com

Lokotrack LT120 jaw plant

BUTLER MACHINERY CO.

RB SCOTT COMPANY INC.

www.butlermachinery.com

www.rbscott.com 1011 Short St. Eau Claire, WI 54701 715-832-9292 Fax: 715-832-7767

3402 36th St. SW Fargo, ND 58014 701-280-3100 800-726-7475 3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. 46th St. Grand Forks, ND 58201 701-775-4238 1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508

CENTRAL SERVICE & SUPPLY, INC. www.centralsands.com 1701 SE Hulsizer Rd. Ankeny, IA 50021 515-964-8600 Fax: 515-964-3314

www.roadbuilders machinery.com 1001 S. 7th St. Trafficway Kansas City, KS 66105 913-371-3822 Fax: 913-371-3870 4115 S. 90th St. Omaha, NE 402-331-9200 5601 Fletcher Ave. Lincoln, NE 402-325-0447 4949 Juergen Rd. Grand Island, NE 308-384-2620

AIS CONSTRUCTION EQUIPMENT CORP. 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Fax: 517-321-4191 www.aisequip.com Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311 Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583

4950 E Highway 12 Aberdeen SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850

ROAD BUILDERS MACHINERY & SUPPLY CO., INC.

PROCESS MACHINERY INC. www.processmachinery.com

20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400

1636 Isaac Shelby Drive Shelbyville, KY 40065 800-860-1523

3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

860 Kaderly Drive Columbus, OH 43228 866-249-4330

Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 West Detroit, MI 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway Springfield, IL 62702 217-789-7711 Fax: 217-744-7314

4670 Crossroads Industrial Dr. Bridgeton, MO 63044 314-291-1330 Fax: 314-291-8050

220 E. Frontage Rd. Bolingbrook, IL 60440 630-739-7474 Fax: 630-739-9443

4110 I-70 Drive Southeast Columbia, MO 65201 573-814-0083 Fax: 573-814-0087

18210 Beck Rd. Marengo, IL 60152 815-923-4966 Fax: 815-923-4973

3364 Percy Drive Cape Girardeau, MO 63702 573-334-5252 Fax: 573-334-1887

1505 Donna Drive Carterville, IL 62918 618-985-3399 Fax: 618-985-2992

701 Industrial Drive Palmyra, MO 63461 573-769-2056 Fax: 573-769-2059

6450 Melton Rd. Portage, IN 46368 219-764-8080 Fax: 219-764-8613

Page 58 • May 26, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 26, 2012 • Page 59

www.macallister.com

BIG. Bad. fast. strong. AVAILABLE.

7515 East 30th St. Indianapolis, IN 46219 800-382-1896 Fort Wayne, IN Washington, IN 800-944-0847 800-932-5120 South Bend 800-685-9849

Terre Haute, IN 800-273-5650

Lafayette, IN 800-283-4231

www.ohiocat.com Cleveland, OH 440-526-6200 800-837-6200 Fax: 440-526-9513 Cadiz, OH 740-942-4626 800-837-6204 Fax: 740-942-4029 Canton, OH 330-478-6525 800-837-6207 Fax: 330-478-6529 Cincinnati, OH 513-771-0515 888-332-4658 Fax: 513-672-7658 Columbus, OH 614-878-2287 888-441-4658 Fax: 614-851-5015

Toledo, (Perrysburg) OH 419-874-7975 888-339-4658 Fax: 419-873-8255 Troy, OH 937-335-7660 888-330-4658 Fax: 937-335-6447 Youngstown, OH 330-530-9010 800-837-6203 Fax: 330-530-9102 Zanesville, OH 740-453-0563 800-837-6205 Fax: 740-452-3605 Richwood, KY 859-372-4665 888-446-4658 Fax: 740-452-3605

www.whayne.com 1400 Cecil Ave. • Louisville, KY 502-774-4441 Ashland, KY Hazard, KY 606-928-3444 606-439-4040 Bowling Green, KY 270-843-3275

Lexington, KY 859-254-2756

Corbin, KY 606-528-3140

Paducah, KY 270-443-3631

Dry Ridge, KY 859-823-1500

Pikevile, KY 606-437-6265

Evansville, IN 812-425-4651

The MX457 130K lbs. 300 hp. 13,430lb@60’. 63’ 5” reach. Innovative American made no compromise

Join the revolution 715-395-6060

www.exodusmachinesinc.com

superior, wisconsin

www.altofer.com Urbana, IL Cedar Rapids, IA 217-359-1671 319-365-0551 Fax: 319-365-5639 Fax: 217-359-6310 Hannibal, MO Davenport, IA 573-221-8600 563-324-1935 Fax: 563-324-2409 Fax: 573-221-7187 Moberly, MO East Peoria, IL 660-263-8200 309-694-1234 Fax: 309-694-4148 Fax: 660-263-8203 Springfield, IL 217-529-5541 Fax: 217-529-0020

Page 60 • May 26, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

LiuGong 856III Wheel Loader, Excavator Shine at Eagle Recycling

Brandeis Machinery & Supply Co. www.brandeismachinery.com Evansville, IN • (812) 425-4491 Ft. Wayne, IN • (260) 489- 4551 Indianapolis, IN • (317) 872-8410 Corbin, KY • (606) 528-3700 Lexington, KY • (859) 259-3456 Louisville, KY • (502) 491-4000 Paducah, KY • (270) 444-8390 Stanville, KY • (606) 478-9201

Gibson Machinery LLC www.gibsonmachinery.com Oakwood Village (Cleveland) OH • (440) 439-4000 Pittsburgh, PA • (724) 695-5000

Roland Machinery Co. www.rolandmachinery.com Springfield, IL • (217) 789-7711 Bolingbrook, IL • (630) 739-7474 Carterville, IL • (618) 985-3399 Marengo, IL • (815) 923-4966 Portage, IN • (219) 764-8080 Bridgeton, MO • (314) 291-1330 Cape Girardeau, MO • (573) 334-5252 Columbia, MO • (573) 814-0083 Palmyra, MO • (573) 769-2056

Eagle Recycling managers stand in front of their 856III LiuGong wheel loader. EAGLE from page 54

to the facility, the excavator’s main use would be atop the large, uneven piles of debris, picking and loading material with its grapple attachment onto conveyors extending longer than a football field in length to start the sorting and recycling process or directly into rail cars for transport to landfills. “One of our biggest considerations when selecting the new excavator was how quickly it could load a rail car,” said Cejas. “The LiuGong excavator we demoed had extremely quick cycle times, an incredibly responsive 9 rpm swing, powerful 4,685 psi main hydraulic pressure with a 148 gallon per minute pump, 70 percent gradability for climbing and a superb counterweight for exceptional balance and stability when working atop large piles of debris. From a maintenance perspective we were happy to see its air intake filter on top versus on the side of the machine, making it easier to access and less susceptible to damage. The LiuGong 936D quickly became one of the primary pieces of equipment used in our daily operation, handling the work of 3 smaller excavators.” With only nine years in business, Eagle Recycling is a relatively new, but growing company. “When my cousin incorporated this business in 2003, he had a great vision, but was perhaps a little ahead of his time with his emphasis on going green. Today, we’re seeing more and more stress placed on the importance of recycling, particularly as it relates to construction and demolition debris. I have a steadfast resolve to fulfill his vision and make Eagle Recycling the best construction and demolition recycling facility in the state of New Jersey by achieving a higher percentage of recycling and improving throughput with cutting edge systems and processes. It’s a logistically challenging business, but the passion of our team of loyal employees will help us continue the growth and success of the company,” said Marangi. Eagle Recycling is a full service, indoor construction and

demolition recycling facility located in North Bergen, N.J. The company processes and recycles a myriad of dry construction debris, loading up to six rail cars of debris daily. By loading rail cars directly on site, the company significantly reduces its carbon footprint and increases the speed and efficiency at which materials can be recycled. The materials loaded into the rail cars are shipped to landfills as far as 550 mi. away. Nearly 70 percent of the construction debris dumped at the Eagle facility is recycled. Eagle Recycling is a member of the U.S. Green Building Council and recently received an award for its Environmental Stewardship from The New Jersey Department of Environmental Protection for voluntarily and proactively going above and beyond compliance in an effort to improve the environment and ensure a sustainable future. For more information on Eagle Recycling of New Jersey, call 201/974-2962. Jersey Rents is a diversified distributor of construction equipment and an authorized LiuGong dealer in the states of New York and New Jersey. Specializing in the sale of new, used and rental equipment, the company offers a variety of equipment lines as well as a full service department at each of its two locations in Bayville, N.J. and Staten Island, N.Y. It also offers onsite equipment service and repair. For more information on Jersey Rents, call 732/361-4487 or visit www.jerseyrents.com. LiuGong Construction Machinery has been producing construction equipment for more than 50 years and is growing globally. LiuGong produces more than 50,000 wheel loaders a year, making the company the largest manufacturer of wheel loaders in the world. LiuGong currently offers wheel loaders, excavators, mini-excavators, backhoe loaders, skid-steer loaders and vibratory soil compactors to the North American Market. LiuGong North America is a member of AED, AEM and NUCA. For more information about LiuGong call 281/579-8882 or visit www.LiuGongNA.com.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 26, 2012 • Page 61

102x152 Track Mounted Impact Plant

6x16 2 Deck Screen-It

Rock-It Static Grizzly

Separate-It RWS 2000 Rock/Wood Separator

PO Box 104524 4303 RT. CC Jefferson City, MO 573-635-8700 (Serving Missouri and Eastern Kansas)

Page 62 • May 26, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

it’s not ’s fault

U-SCREEN C-36 NEW!

by TheShelterPetProject.org

Dealer Inquiries Invited Designed For Skid Steers, Loaders & Excavators •Screen 500 to 600 yards per day •Any Size Screen Available •Stacking Height: 9’ •Width: 5’ 6” •Length: 28” •6’ x5’ Screening Deck

•Easy Change Screens •25 HP Kubota Diesel Power •Hydraulically operated Screen •Hydraulic trailer axle •30” Hydraulic Conveyor Belt •Towed with 1 Ton Vehicle

www.u-screen.com 905 Turnpike Street • Canton, MA 02021

1-866-USCREEN (781) 828-9100 • Fax: (781) 821-8807

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 26, 2012 • Page 63

High Productivity – Low Operating Costs SENNEBOGEN green line material handling machines make your competitors “green with envy” ALTA EQUIPMENT COMPANY www.altaconstructionequipment.com

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com

Wixom, MI 248-449-6700

Sterling Hts, MI 586-977-6000

Muskegon, MI 231-798-8754

Zeeland, MI 616-748-4108

Kentwood, MI 616-698-2960

Lansing, MI 517-272-5033

Battle Creek, MI 269-965-1269

Wixom, MI (Cons. Division) 248-356-5200

Romulus, MI 734-641-8238 Saginaw, MI 989-752-9400

Byron Center, MI 616-878-7450

Louisville, KY 502-491-4000

Paducah, KY 270-444-8390

Evansville, IN 812-425-4491

Indianapolis, IN 317-872-8410

Corbin, KY 606-528-3700

Ft.Wayne, IN 260-489-4551

Lexington, KY 859-259-3456 Stanville, KY 606-478-9201

HOWELL TRACTOR & EQUIPMENT LLC www.howell tractor.com Gary,IN 800-852-8816 Peru, IL 800-342-6072

GIBSON MACHINERY LLC www.gibson machinery.com Oakwood Village, OH 440-439-4000 Pittsburgh, PA 724-695-5000

ROLAND MACHINERY CO. www.rolandmachinery.com Carterville, IL 618/985-3399

Franksville, WI 262-835-2710

Bridgeton, MO 314-291-1330

DePere, WI 920-532-0165

Columbia, MO 573-814-0083

DeForest, WI 608-842-4151

Cape Girardeau, MO 573-334-5252

Eau Claire, WI 715-874-5400

Palmyra, MO 573-769-2056

Schofield, WI 715-355-9898 Escanaba, MI 906-786-6920

THE VICTOR L. PHILLIPS CO.

ROAD MACHINERY & SUPPLIES CO.

www.vlpco.com Kansas City, MO 800-878-9290 Joplin, MO 800-878-8223 Brookline Station, MO 800-955-2729 Wichita, KS 800-878-3346 Topeka, KS 800-878-4345 Garden City, KS 800-511-1435

Savage, MN 800-888-9515

Milan, IL 800-633-9114

Des Moines, IA 800-555-1445

Duluth, MN 800-888-9535

Cedar Rapids, IA 800-616-6615

Virginia, MN 800-752-4304

Sioux City, IA 800-633-9104

TITAN MACHINERY Bismark, ND 800-247-1282

Rapid City, SD 888-388-0266

Dickinson, ND 888-418-2873

Sioux Falls, SD 800-262-5373

Fargo, ND 800-342-4330

Williston, ND 877-570-4635

Omaha, NE 866-733-1100

Lincoln, NE 866-801-6261

Minot, ND 701-852-3188

Page 64 • May 26, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 26, 2012 • Page 65

Prro en Perfform ormance mance

JW JONES COMP PANY LLC ROADBUILDERS LY Y CO. MACHINERY & SUPPL 1001 S. 7th St. 2468 S State Road 67, Kansas City, KS 66105 Paragon, IN 46166 (913) 371-3822 1-800-342-5491 roadbuildersmachinery.com roadbuildersm machineryy.com jjwjonescompany.com jwjonescompany j p y.com Nebraska, Kansas & Indiana, Indiana, Illinois & We esterOv n Mer issouri W ester e K entuco kr ys.. Call Over 20 North Distributors. O North American rican ca an a Distributo Dinstr ributo C Western Kentucky

TITAN MACHINERY

for for

15125 South Robert Trail Rosemount, Minnesota 55068 1-800-642-4441 titanmachinery.com titanmachiineryy.com North Nor th & South uth Dakota, Dak kota, ota, Wisconsin isconsin your yoMinnesota, ur closest. l t.W

Page 66 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Burris Equipment Co. 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 Fax 847/336-2697 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 Fax 815/363-4109 10351 W. Laraway Rd. Frankfort, IL 60423 815/464-6650 Fax 815/464-6951

www.kubota.com

EVERYTHING YOU VALUE

ABC Lauds Court Decision to Block NLRB Poster Rule Associated Builders and Contractors (ABC) celebrated the U.S. Court of Appeals for the D.C. Circuit decision to grant an injunction in the legal challenge against the National Labor Relations Board’s (NLRB) “Notification of Employee Rights” notice posting rule. Considered a major victory for ABC, the NLRB’s “Notification of Employee Rights” notice posting rule’s compliance date of April 30 is no longer in effect, as the injunction places the rule on hold while the court considers the Coalition for a Democratic Workplace’s appeal of the U.S. District Court’s unsatisfactory ruling. “For the last several months, ABC has vigorously fought NLRB’s politically motivated policies that threaten to paralyze the construction industry in order to benefit the special interests of politically powerful unions,” stated ABC Vice President of Federal Affairs Geoff Burr. “The NLRB’s notice posting rule is a perfect example of how the pro-union board has abandoned its role as a neutral enforcer and arbiter of labor law.” The April 17 decision by the U.S. Court of Appeals for the D.C. Circuit follows the decision issued by the U.S. District Court for South Carolina, stating that the NLRB does not have the statutory authoriity to require business owners to post a biased poster.

Annual IAAP Convention Draws Strong Numbers CONVENTION from page 32

Brad Cowell (L) and Dave Bawinkel of Miller-Bradford & Risberg Inc. take a break from the day’s events.

Chris Dodge (seated) of William Charles Construction operates the Cat simulator while Clyde Kessel and John Norton, both of Patten CAT, look on and Jared Brown of Simformotion gives Dodge some instructions.

Sam Hayes (L) and Ken Krimmel of G.W. Van Keppel Co. are eager to talk about their company.

(L-R): Nick Wright and Kevin Fiddes of McAllister Equipment Co., Jeff Lovgren of Kolberg-Pioneer Astec Mobile Screens and Clyde Robison of McAllister Equipment Co. get a chance to compare notes during the convention.

Jeff Spritka (L) and Steve Matic of Atlas Copco are looking to talk about surface drilling.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 67

Aspen Equipment Co. 9150 Pillsbury Ave. S Bloomington, MN 55420 (952) 888-2525

McAllister Equipment Co. 150 E. North Ave. Villa Park, IL 60181 (630) 530-7600 (630) 530-1901 Alsip/Chicago (708) 389-7700

E. Peoria (309) 694-4455 Rockford (815) 227-0555 Springfield (217) 789-0351

Roland Machinery Co. 4670 Crossroads Industrial Drive Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252

Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Carterville, IL (618) 985-3399

Central Power Systems & Services 9200 Liberty Drive Liberty, MO 60468 (816) 781-8070 (816) 792-9100 Springfield, MO (417) 865-0505 Wichita, KS (316) 943-1231

Great Bend, KS (620) 792-1361 Liberal, KS (620) 624-7274 Salina, KS (785) 825-8291 Colby, KS (785) 462-8211

Page 68 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Environmental Awareness...

TransCanada Reapplies for Keystone XL Oil Pipeline With Route Changes By Matthew Daly ASSOCIATED PRESS

WASHINGTON (AP) The Canadian company trying to build the disputed Keystone XL pipeline in the United States submitted a new application for the project May 4 after changing the route to avoid environmentally sensitive land in Nebraska. TransCanada said it applied again to the State Department for permission to build the pipeline to carry oil from tar sands in western Canada to a company hub in Steele City, Neb. From there, the project would link up with other pipelines operated by the company to carry oil to refineries on the Texas Gulf Coast. President Barack Obama blocked the pipeline earlier this year, citing uncertainty over the Nebraska route — a decision that drew fire from Republicans and industry groups. Calgary-based TransCanada had proposed a new route in April that would veer east around the groundwater-rich Sandhills region before looping back to the original route. State Department approval is needed because the $7 billion pipeline would cross a U.S. border. The department confirmed May 4 the application for the new route had been received. The pipeline filing came on the same day as a disappointing report on U.S. job growth. The Labor Department said employers pulled back on hiring in April for the second straight month, evidence of an economy still growing only sluggishly, though the overall jobless rate slipped to 8.1 percent as more people gave up looking for work. Obama is under pressure to support the pipeline from Republicans and business and labor leaders who argue it would create jobs; the State Department estimates it could result in up to 6,000 new jobs. “The multibillion-dollar Keystone XL pipeline project will reduce the United States’ dependence on foreign oil and support job growth by putting thousands of Americans to work,” said Russ Girling, TransCanada’s president and chief executive officer. “Keystone XL will transport U.S. crude oil from the very large Bakken supply basin in Montana and North Dakota, along with Canadian oil, to U.S. refineries.” The pipeline’s opponents, including many Democrats and environmental groups, say it would transport “dirty oil” from tar sands in Alberta, Canada, that would require huge amounts of energy to extract. They also worry about a possible spill. The pipeline would travel through Montana, South Dakota, Kansas and Oklahoma, in addition to Nebraska. In blocking the pipeline in January, Obama said there was not enough time for a fair review before a looming deadline forced on him by congressional Republicans. The action did not kill the project but put off a tough choice on the onceobscure pipeline, which has become a flashpoint in the bitter partisan political fight over jobs and the environment and a focus of the presidential campaign between Obama his likely Republican opponent, Mitt Romney. Romney has called on Obama to approve the pipeline.

Nebraska Gov. Dave Heineman signed a bill in April that allows the state to proceed with its review of the proposed pipeline through his state, regardless of what happens at the federal level. State Department spokesman Mark Toner said U.S. officials would conduct a thorough review of the new application, with a final decision not expected until early next year — well after the presidential election. Officials will use previous studies to the extent possible, Toner said, but will need to complete a new environmental assessment, especially since the route has changed since TransCanada first applied for the pipeline in 2008. The State Department review is likely to include hiring an outside consultant, a point of contention in the original review conducted by the agency. Democratic lawmakers complained that the firm that conducted the review, Cardno Entrix, had a conflict of interest because of previous work with TransCanada. The department’s acting inspector general found no conflict of interest or improper political influence but said the State Department could have done a better job of evaluating some concerns about the project and should improve its oversight of contractors. Jane Kleeb, executive director of Bold Nebraska, a group that opposes the pipeline, said the new route still goes through an aquifer that serves eight states and should not be approved. “The fundamental facts remain: Americans are being asked to put clean water at risk for an extreme form of energy that will add nothing to our energy security,” Kleeb said. But Girling, the TransCanada CEO, said the company’s proposal builds on more than three years of environmental review already conducted for Keystone XL, “the most comprehensive process ever for a cross-border pipeline.” The earlier work should allow the new proposal to be processed “expeditiously,” Girling said, with a federal decision made after a final route through Nebraska is approved by state officials. TransCanada expects to begin construction of the pipeline next year. Canadian Natural Resources Minister Joe Oliver said the new route increases the likelihood the project will be approved. “I’ve been cautiously optimistic, I’m a little less cautious now,” Oliver said. After Obama rejected the pipeline in January, TransCanada said it will build a portion of the line from Oklahoma to Texas. That 485-mi. line from Cushing, Okla., to Port Arthur, Texas, does not require State Department approval because it does not cross a U.S. border. Another portion of the pipeline, connecting Steele City to Cushing, is already in place. Obama has vowed to expedite the Oklahoma-to-Texas segment, noting that sending additional oil to refineries on Texas’ Gulf Coast would remove a critical bottleneck in the country’s oil transportation system.

CONTINENTAL EQUIPMENT CORP. A division of AIS www.aisequip.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000 Fax: 517/321-4191

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 502/499-3195 Fax Evansville, IN 812/425-4491 812/425-1171 Fax Corbin, KY 606/528-3700 606/528-9014 Fax Lexington, KY 859/259-3456 859/254-0783 Fax Stanville, KY 606/478-9201 606/478-9208 Fax Paducah, KY 270/444-8390 270/575-4907 Fax Indianapolis, IN 317/872-8410 317/872-8417 Fax Ft.Wayne, IN 260/489-4551 260/489-1620 Fax

RMS RENTALS 12520 Quentin Ave. So, Ste 100 Savage, MN 55378 952/895-9595 800/888-9515

ROAD MACHINERY & SUPPLIES COMPANY www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8671 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 218/741-9011 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. 1001 S. 7th St. Trafficway Kansas City, KS 66105 913/371-3822 913/371-3870 Fax Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ May 26, 2012 â&#x20AC;¢ Page 69

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 906/786-5813 Fax Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0526 920/532-0526 Fax DeForest, WI 608/842-4151 608/842-4193 Fax Eau Claire, WI 715/874-5400 715/874-5401 Fax Franksville WI 262/835-2710 262/835-2844 Fax Schofield, WI 715/355-9898 715/241-0044 Fax

GENERAL EQUIPMENT & SUPPLIES www.genequip.com 4300 W Main Ave Fargo ND 58103 800/437-2924 701/364-2190 Fax 905 20th Avenue SE Minot ND 58072 800/825-0479 2300 Vermont Avenue Bismarck ND 58504 800/279-4437

DOZERS From Komatsu â&#x20AC;&#x201C; The Dozer Experts

0VS % % % BOE % %P[FST HJWF ZPV UIF SFMJBCJMJUZ BOE WFSTBUJMJUZ ZPV FYQFDU GSPN UIF EP[FS FYQFSUT BU ,PNBUTV 5IFTF UP IPSTFQPXFS NBDIJOFT IBWF UIF GFBUVSFT ZPV OFFE UP DPNQMFUF ZPVS KPCT PO UJNF BOE PO CVEHFU t )ZESPTUBUJD 5SBOTNJTTJPO )45 GPS TVQFSC BDDVSBDZ BOE TNPPUI DPOUSPM t &YDFMMFOU CMBEF WJTJCJMJUZ UIBU NJOJNJ[FT PQFSBUPS HVFTTXPSL BOE SFEVDFT DZDMF UJNFT t "MM EBJMZ NBJOUFOBODF QPJOUT DFOUSBMJ[FE JO POF MPDBUJPO GPS DPOWFOJFOU BDDFTT

XXX LPNBUTVBNFSJDB DPN X XX LPNBUTVBNFSJDB DPN

Page 70 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Adding to the Rolls…

HCEAAnnounces New Members The Historical Construction Equipment Association (HCEA), a 501(c)3 non-profit organization dedicated to preserving the history of the construction, dredging and surface mining equipment industries, announced three new corporate memberships. W. W. Williams, one of the nation’s leading industrial distribution, repair and service companies, celebrates its centennial this year. Headquartered in Columbus, Ohio, its heritage includes dealerships for AustinWestern, Euclid, Koehring, Terex and numerous other construction lines. It has been a major dealer of Detroit Diesel Allison since 1977, and has diversified into rentals and military logistics while representing Sterling trucks and Deutz, Yanmar, Isuzu, Mercedes-Benz engines and other lines. H & K Equipment Inc., of Pittsburgh, Pa., provides a broad range of services for material handling and industrial cleaning equipment. An integral part of the lift truck market in the Pittsburgh area since 1935, its services

range from new and used truck sales, leasing and rentals to service, parts and remanufacturing. Rudolph/Libbe Companies is headquartered near Toledo, Ohio, and consists of two self-performing general contractors. Rudolph/Libbe Inc., operates nationally, and many of its superintendents, foremen and trades workers who staff its projects have been with the firm for more than 30 years. Corporate members designate up to five of their officers and employees to receive the HCEA’s quarterly magazine, Equipment Echoes, and VIP passes to its annual International Convention and Old Equipment Exposition, to be held next at its Bowling Green, Ohio, headquarters Sept. 14 through 16, 2012. They also receive links on the HCEA’s Web site and are being publicized in Equipment Echoes and in press releases to trade publications and Web sites. For more information, call 419/352-5616 or visit www.heca.net.

Local Projects in Minnesota Could Take the Largest Hit BILL from page 1

Diamond Equipment Inc. 1060 E. Diamond Ave. Evansville, Indiana 47711 (812) 425-4428 (800) 258-4428 Fax: (812) 421-1036 www.diamond equipment.com 2000 Harlan Drive Terre Haute, IN 47802 (812) 299-4747 (888) 343-4747 Fax: (812) 299-3687 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 (618) 242-2273 (800) 388-6396 Fax: (618) 242-9161 1046 Lovers Lane Bowling Green, KY 42103 (270) 781-1061 (800) 489-1061 Fax: (270) 781-0907 1530 Heil Quaker Blvd. Nashville, TN 37086 (615) 641-1100 (800) 635-9454 Fax: (615) 641-1108

2300 Cassens Drive Fenton, MO 63026 (636) 343-9970 www.lubyequipment.com 199 Airport Rd. Cape Girardeau, MO 63702 (573) 334-9937 4375 Camp Butler Rd. Springfield, IL 62707 (217) 744-2233 2625 North 24th St. Quincy, IL 62305 (217) 222-5454 8853 Petrov Drive Caseyville, IL 62232 (618) 397-9971

4100 Gardner Ave. Kansas City, MO 64120 (816) 241-9290 (816) 241-1738 www.vlpco.com Joplin, MO (800) 878-8223 (417) 781-8222 Springfield, MO (800) 955-2729 (417) 887-2729 Wichita, KS (800) 878-3346 (316) 838-3346 Topeka, KS (800) 878-4345 (785) 267-4345 Garden City, KS (800) 511-1435 (620) 275-1996

fund to pay for a floodwall in South St. Paul and improvements to a battered women’s shelter in Minneapolis. The House can either approve the bill with the changes or send it to a conference committee for negotiations. The University of Minnesota would see $64 million under the bill, and $132 million would go to renovations and additions within the Minnesota State Colleges and Universities system. Flood prevention projects, which weren’t included in the initial House proposal, will get $30 million, and the bill provides $49 million for road and bridge work, as well as other transportation projects. The Hormel Institute in Austin would get $13.5 million, more than any other local development project. But funding for several local projects has been cut. The measure provides no money for a St. Paul Saints baseball park and nothing for civic center expansions in Mankato, St. Cloud and the Mayo Civic Center in Rochester. Rep. Alice Hausman, DFL-St. Paul, voted

for the bill but lamented the lack of money for community projects. “The business community engaged on this bill,” Hausman said. “They compared us to cities across the nation. We have given them exactly zero for all that work. We missed an opportunity to build strong regional centers in partnership with those cities.” Instead of funding specific local projects, the bill would create a $50 million fund to be handled by the state Department of Employment and Economic Development. Communities can apply for grants for projects. Some lawmakers were opposed to asking taxpayers to foot the bill for that. “The projects in here can wait but the debt we’re foisting onto the backs of Minnesotans is crushing,” said Rep. Mark Buesgens, RJordan. The House’s $221 million bonding bill for a Capitol restoration failed by one vote last month. Many Democrats said during that debate that they opposed funding the Capitol overhaul at the expense of other projects.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 71

Howell Tractor 2770 May Road Peru, IL 61354 800/342-6072 Fax: 815/224-2538 480 Blaine Street Gary, IN 46406 800/852-8816 Fax: 219/977-4220

DEALER DEA ALER IMPRINT IMPRINT AREA AREA

Illinois Truck & Equipment www.iltruck.com 320 Briscoe Drive Morris, IL 60450 815/941-1900 Fax: 815/941-1486

INTRODUCING A NEW E.P.I.C. GENERATION

Mid Country Machinery 3478 5th Ave South (Bus. Hwy 20) Fort Dodge, IA 50501 800/206-5936 4734 Sergeant Rd. (Hwy 63) Waterloo, IA 50701 319/234-8710

EFFICIENT

106 8th Street Sergeant Bluff, IA 51054 712/943-4470

POWERFUL Custom Truck & Equipment www.customtruckandequipment.com 7701 E. 24 Highway Kansas City, MO 64125 800/861-1065 816/241-4888 Fax: 816/241-8826 2121 Stephens Blvd. Joplin, MO 64804 417/659-8969 Fax: 417/659-8871

Kelbe Brothers Equipment Co, Inc. www.kelbebros.com 12770 W. Silver Spring Drive Butler, WI 53007 262/373-2151 Fax: 262/373-2102 4621 Dutch Mill Rd. Madison, WI 53716 608/221-8300 Fax: 608/221-0610

INTELLIGENT

2140 Barrett Barrett Park Par Drive Suite 101 Kennesaw,, Georgia Geor 30144 770-499-7000 www.kawasakiloaders.com asakilo

> > >

COMFORTABLE

Page 72 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Parts. 48 hours. Guaranteed. or machine-critical parts, you’re losing money—so Doosan If you’re waiting ffor will ship any machine debilitating part in 48 hours or less. Iff for some reason we can’t, we’ll pay for a rental. It’s as simple as that. Doosan Delivers: Deliverrs: P PAR AR RTS Doosan PARTS The 48-Hour Parts Guarantee is subject to carrier deliverry restrictions and / or governmental agency ncy delays.

Contact your local Doosan dealer fo for more information.

D o o s a n a n d t h e D o o s a n lo g o a r e r e gis t e r e d t r a d e m a r k s o f D o o s a n C o r p. in t h e U ni t e d S t a t e s a n d v a r io u s o t h e r c oun trie s around t h e world. © 2 0 12 Doo s a n Inf r a c or e Cons tr u c tion Equipm e nt A m eric a . A ll righ t s re s er ve d. | 0 4124 5 9

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 73

ized Doosan Dealers

ILLINOIS

MINNESOTA INNESOTA

OHIO OHIO

Christofano Equipment Company Chicago Ridge 708-425-6466

Lano Equipment, Inc. Shakopee ŨŤšǍţţŤǍťŢŠş ì ŧŦŦǍŦŤŢǍťŠşş Anoka ŦťŢǍŢšŢǍŠŦšş ì ŧŧŧǍţţŧǍŤšťť

Gibson Machinery LLC Cleveland ţţşǍţŢŨǍţşşş

christofano.com

Luby Equipment Quincy 217-222-5454 lubyequipment.com

IN INDIANA DI A N A Ronson Equipment Co, LLC Lowell šŠŨǍťŨťǍŤťŧş ì ŧťťǍŢŤşǍŤŤŢŧ

lanoequip.com

M MISSOURI ISSOURI Luby Equipment Cape Girardeau ŤŦŢǍŢŢţǍŨŨŢŦ

bobcat-ent.com

S SOUTH OUTH D DAKOTA AKOT TA N OR T H D AKOT TA NORTH DAKOTA

KANSAS K ANSAS

Bobcat of Grand Forks Grand Forks 701-772-5006 bobcatofgrandforks.com

sellersequipment.com

Bobcat of Devils Lake Devils Lake ŦşŠǍťťšǍŤŢŢŠ

M MICHIGAN ICHIGAN

bobcatofdevilslake.com

Carleton Equipment Company, Inc. Kalamazoo šťŨǍŢţŢǍšŨţŢ Grand Rapids ťŠťǍŧŦŦǍŢŢŧŧ Livonia ŦŢţǍţšŠǍŨŨŨŨ Saginaw 989-777-6666

Bobcat of Williston Williston 701-572-5050

carletonequipment.com

Bobcat Enterprises, Inc Cincinnati ŤŠŢǍŧŦţǍŧŨţŤ Hilliard 614-876-1116

lubyequipment.com

ronsonequipment.com

Sellers Equipment, Inc. Wichita ŢŠťǍŨţŢǍŨŢŠŠ

gibsonmachiner y.com

bobcatof williston.com

Diesel Machinery Inc. Sioux Falls ťşŤǍŢŢťǍşţŠŠ ì ŧşşǍţŤťǍţşşŤ Rapid City ťşŤǍŢţŧǍŦţŢŧ ì ŧşşǍťŤŧǍŢşţŦ Aberdeen ťşŤǍŦšŤǍţŢťţ ì ŧŧŧǍŦťšǍťŢŠš dieselmachiner y.com

Page 74 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Volvo CE Breaks Ground on $100 Million U.S. Expansion On May 4, Volvo Construction Equipment broke ground on the first phase of the 100 MUSD expansion of its site in Shippensburg, Pa. The first phase includes construction of a new America’s headquarters office. Incorporating the latest environmental building practices, the expansion is a visible sign of the company’s commitment to the important North American market. When complete the development will include not only a new office building and customer demonstration center but also will localize production of some of the company’s larger construction machines. Made in the U.S.A. Volvo CE is making a commitment to have machines built locally. The expansion will bring production of some key product lines to Shippensburg. The new series of wheel loaders (L60G, L70G and L90G) will be the first of three new machine types expected to come off the production line. Larger models of the wheel loader, excavator and articulated hauler product lines are planned in the future. The factory could eventually produce 70 percent of Volvo Construction Equipment machines sold in North America. President of Sales Region Americas Göran Lindgren said it’s an exciting time for everyone involved. “This groundbreaking symbolizes Volvo CE’s commitment to North America and indeed to the whole Americas region,” said Lindgren. “The investment will increase the company’s flexibility and agility, enabling us to meet customer demands faster.” Core Values Built In The design of the new America’s Headquarters building follows in the footsteps of an on-going expansion project in the

ways and the actual facility we work in is no different. The infrastructure investment is just one way we are living Volvo CE core values of quality, safety and environmental care.” The new headquarters office is expected to be ready for occupation by the beginning of 2013. The Shippensburg facility employs more than 800 people and makes more than 50 different models of asphalt pavers, soil and asphalt compactors, milling machines and motorgraders. This figure is set to rise to around 70 models by 2015. Volvo acquired the facility in April 2007 as part of its purchase of Ingersoll Rand’s road development division. Today it has become an important element of the worldwide Volvo Construction Equipment manufacturing Andy Knight (L), president, Volvo Construction Equipment Operations Region footprint, spread across four continents. Americas, and Göran Lindgren, president, Volvo Construction Equipment Sales For more information, visit Region Americas, make symbolic digs at the groundbreaking. www.volvoce.com. factory. The new office building will be 36,000 sq. ft., consisting of two floors and a “bridge” that will connect the new building with existing facilities. Efforts also are being made to secure LEED certification for the office building. LEED (Leadership in Energy and Environmental Design) certification requires that buildings be designed, constructed, and operated with careful consideration for environmental impact of the health of occupants. The Shippensburg facility recently received a Silver LEED certification for the 2010 expansion of the manufacturing area. Operations President of Volvo CE Americas Andy Knight said the Shippensburg campus will be a world class facility. Volvo Construction Equipment broke ground on the new Shippensburg, Pa., facility “We are an industry leader in so many on May 4.

When complete the development will include not only a new office building and customer demonstration center but also will localize production of some of the company’s larger construction machines.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 75

Construction Equipment Scale Models Make Great Father’s Day Gifts! Allis-Chalmers HD21 Dozer/Ripper, 1:50 Scale............$75 Allis-Chalmers HD-41 Dozer, 1:25 Scale ....................$200

All New in Box

Bantam C-35 Crawler Backhoe, 1:50 Scale ..................$70

Hitachi EH700 Off-Highway Truck, 1:50 Scale..............$40 International 175 Crawler Loader w/Multi-Purpose Bucket, 1:50 Scale ..........................................................$65

Bantam C-35 Crawler Shovel, 1:50 Scale ....................$70

CALL Toll Free

International TD-24 Military Dozer, 1:50 Scale ............$50

Bantam Shovel Mounted on a White Truck, 1:50 Scale$95

800-523-2200

JCB 456 ZX Wheel Loader, 1:50 Scale ..........................$85

Ext. 197

John Deere 200D LC Excavator ....................................$45

Bobcat M400 Gold 50th Anniversary Skid Steer Loader, 1:25 Scale ........................................................................$35

John Deere 624K Wheel Loader, 1:50 Scale ................$45

Bobcat M610 Golden 50th Anniversary Skid Steer

John Deere 624K Military Wheel Loader, 1:50 Scale ..$35

Loader..............................................................................$45 Bobcat S175 Skid Steer Loader, 1:50 Scale ................$25 Bobcat S175 Skid Steer Loader, 1:25 Scale ................$40 Bobcat S205 Skid Steer Loader & Pick-Up Truck/Trailer Set, 1:50 Scale ................................................................$65

Caterpillar 772 Off-Highway Truck, 1:50 Scale ............$75 Caterpillar 785D Mining Truck, 1:50 Scale..................$160 Caterpillar 924 G Versalink Wheel Loader: 1:50 Scale $45 Caterpillar 950H Wheel Loader, 1:50 Scale ..................$65

John Deere 772CH Motor Grader, 1:50 Scale ..............$35 John Deere 850K Crawler Dozer, 1:50 Scale ................$65 Komatsu D51 EX Dozer, 1:50 Scale ..............................$65

Caterpillar 963 Traxcavator, 1:50 Scale ........................$65

Komatsu D375 Dozer, 1:50 Scale ..................................$90

Caterpillar 963D Track Loader, 1:50 Scale....................$60

Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$85

Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ......$35

Caterpillar 966A Wheel Loader, 1:50 Scale ..................$65

Komatsu HM250 Articulated Truck, 1:50 Scale ..........$75

Bobcat Tractor/Trailer Set, 1:50 Scale ..........................$90

Caterpillar 977 Traxcavator, 1:50 Scale ........................$60

Komatsu PC14R Mini-Excavator, 1:32 Scale ................$50

Case CX210B Excavator, 1:50 Scale ............................$35

Caterpillar 980G Wheel Loader, 1:50 Scale ..................$50

Komatsu PC2000-8 Front Shovel, 1:50 Scale ............$235

Case 330B Articulated Truck, 1:50 Scale......................$35

Caterpillar 992G Wheel Loader, 1:50 Scale ..................$80

Case 621E Wheel Loader, 1:50 Scale............................$35

Caterpillar Military 924H Versalink Loader in Desert

Case 1850K Dozer, 1:50 Scale ......................................$40

Camouflage, 1:50 Scale ..................................................$45

Caterpillar AP600D Paver, w/ or w/out Canopy, 1:50 Scale ..

Caterpillar Military 120M Motor Grader in Desert

..........................................................................................$65

Camouflage, 1:50 Scale ..................................................$70

Caterpillar AP655D Paver, 1:50 Scale ..........................$65

Dynapac CC232 Vibratory Compactor, 1:35 Scale ......$55

LeTourneau Super C Scraper w/Cab, 1:50 Scale ........$80

Caterpillar CB-534D XW Asphalt Compactor, 1:50 Scale ..

Hamm 3307 Compact Roller, 1:34 Scale ......................$60

LeTourneau Military Super C Scraper, 1:50 Scale ......$50

Bobcat 773 50th Anniversary Skid Steer Loader, 1:25 Scale ................................................................................$50

Komatsu SK1020 Skid Steer Loader, 1:25 Scale ........$45 Komatsu SK1026 Skid Steer Loader, 1:25 Scale ........$45 Komatsu WA470 Wheel Loader, 1:50 Scale..................$75 Komatsu WA600-6 Wheel Loader, 1:50 Scale ..............$80

..........................................................................................$50

Link-Belt 3200 All-Terrain Crane, 1:50 Scale ..............$180

Caterpillar D6T XW Track-Type Tractor ........................$70

Northwest 25-D Backhoe, 1:50 Scale ............................$85

Caterpillar D7E Track-Type Tractor, 1:50 Scale..........$100

$75

Northwest 25-D Shovel, 1:50 Scale ..............................$70

Caterpillar D8R Track Type Tractor, 1:50 Scale............$55

Terex AC100/4 All-Terrain Crane, 1:50 Scale ..............$180

Caterpillar D11R Track-Type Tractor, 1:50 Scale ........$100

Terex RC45 Rough Terrain Crane, 1:50 Scale ............$180

Caterpillar 140H Motor Grader, 1:50 Scale ..................$75

Vogele Vision 5200-2 Paver, 1:50 Scale ......................$150

Caterpillar 247B Multi-Terrain Loader, 1:32 Scale........$35

Volvo A25D Articulated Truck, 1:50 Scale ....................$75

Caterpillar 308C CR Mini-Excavator, 1:50 Scale ..........$65

Volvo BL71 Backhoe Loader, 1:50 Scale ......................$50

Caterpillar 365C Front Shovel, 1:50 Scale..................$120 Caterpillar 416 Backhoe/Loader, 1:50 Scale ................$75

Caterpillar 416 Backhoe/Loader, 1:32 Scale

Caterpillar 623G Elevating Motor Scraper, 1:50 Scale $40

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Volvo L90E Wheel Loader, 1:50 Scale ..........................$75 Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale ..........$85

Shipping and Handling Included

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Page 76 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

RTL Equipment Inc. 3000 SE Gateway Drive Grimes, IA 50111 515-986-0262 Fax: 515-986-0267 2601 120th St. NW Swisher, IA 52338 319-857-4045 Fax: 928-441-1269

Custom Truck & Equipment 7701 Highway 24 Kansas City, MO 64125 800-861-1065 www.cte-equipment.com

All Erection & Crane Rental Corp. 4700 Acorn Dr. Independence, OH 44131 800-232-4100 Fax: 216-642-7633 www.allcrane.com

Tough and rugged, the Terex® RT 130 is the crane of choice for the most demanding rough terrain applications. Other Terex® Cranes Products:

Telescopic Truck Cranes Boom Trucks All Terrain Cranes Crawler Cranes Lattice Boom Truck Cranes Tower Cranes Rough Terrain Cranes

Terex Cranes Waverly Waverly, IA Tel 319 352 3920 • Fax 319-352-5727 www.terex-cranes.com inquire@terexwaverly.com © 2008 Terex Corporation • Terex is a registered trademark of Terex Corporation in the United States of America and many other countries.

BRANCH LOCATIONS All Crane Rental of PA, LLC Pennsylvania 412-382-4200 All Crane & Equipment Rental Corp. West Virginia 304-766-0300 Dawes Rigging & Crane Rental, Inc. Wisconsin 414-453-5335 Jeffers Crane Service, Inc. Michigan 419-693-0421 For Your Local Terex Dealer, Please Contact: Waverly Operations 106 12th Street S.E. Waverly, IA 50677 USA Phone: (319) 352-3920 Fax: (319) 352-9395 email: inquire@terexwaverly.com web: http://www.terex-cranes.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 77

CONSISTENTLY GOOD GRADES Your mother would be proud

NorAm 65E | 110 HP | 16,800 LBS | 10' or 12' BLADE Are you looking for consistently good grades in confined areas? The NorAm 65E offers standard features such as a 53" Circle “A” Frame Drawbar, Full Power Shift Transmission with Torque Converter, and Torque Proportioning Rear Differential, making it the highest resale value in its class. Ease of control and big grader performance will earn your operators an “A+” for Fine Finishing.

We put the “Know” in Knowledge when it comes to Compact Motor Graders ILLINOIS BIRKEY'S CONST. EQUIPMENT construction.birkeys.com Galesburg (309) 341-4360 Bloomington (309) 827-0520 Mattoon (217) 235-3158 Urbana (217) 337-1781

ILLINOIS WEST SIDE TRACTOR SALES www.westsidetractorsales.com Naperville (630) 355-7150 Rockdale (815) 730-9011 Rockford (815) 961-3160 South Holland (708) 331-6362 Wauconda (847) 526-7700

DIAMOND EQUIPMENT www.diamondequipment.com Mt. Vernon (618) 242-2273

www.noram65.com

MINNESOTA ZIEGLER CAT www.ZieglerCAT.com Minneapolis (800) 352-2812 Brainerd (877) 829-9850 Buhl (800) 446-9795 Columbus (866) 982-5656 Crookston (800) 422-5782 Duluth (800) 421-3831 Fergus Falls (800) 346-7649 Jackson (866) 847-6401

MINNESOTA ZIEGLER CAT Marshall (800) 325-4929 North Mankato (877) 845-3938 Rochester (800) 247-1068 Shakopee (800) 352-2812 St. Cloud (800) 522-9469 WISCONSIN MILLER-BRADFORD & RISBERG INC. www.miller-bradford.com Sussex 800-242-3115 Madison 800-585-7219 Eau Claire 800-585-7232 DePere 800-638-7448 Abbotsford 888-886-4410

MISSOURI FABICK CAT www.fabickcat.com Fenton (636) 343-5900 Fenton (rental services) (636) 343-5905 Cape Girardeau (573) 332-1122 Columbia (573) 442-6880 Foristell (800) 539-9217 Jefferson City (573) 636-3184 Joplin (417) 624-3010 Springfield (417) 866-6651 Springfield (rental services) (417) 866-2100

INDIANA DIAMOND EQUIPMENT www.diamondequipment.com Evansville (812) 425-4428 MACALLISTER MACHINERY SALES/RENTALS www.macallister.com Indianapolis (317) 545-2151 Indianapolis (317) 244-RENT (7368) Fort Wayne (260) 483-6469 (heavy equip.) (260) 969-3322 (rental store) Lafayette (765) 449-8191 (heavy equipment) (765) 446-5600 (rental Store)

INDIANA MACALLISTER MACHINERY SALES/RENTALS Terre Haute (812) 478-3155 (heavy equipment) (812) 231-6000 (rental store) South Bend (574) 288-6622 Washington (812) 254-1712 Bicknell (812) 735-0286 Bloomington (812) 349-9220 Fishers (317) 598-9700 Greensburg (812) 663-5829 Richmond (765) 966-0626 Yorktown (765) 759-2CAT (2228)

IOWA ZIEGLER CAT Altoona 800-342-7002 Atlantic 877-547-3819 Sioux City 712-252-4401 Fort Dodge 800-342-1848 Mason City 800-342-1849 Postville 800-526-0889 KANSAS SELLERS EQUIPMENT www.sellersequipment.com Garden City (620) 275-9621 Olathe (913) 764-2011 Salina (785) 823-6378 Topeka (785) 862-0031 Wichita (316) 943-9311

KENTUCKY DIAMOND EQUIPMENT www.diamondequipment.com Bowling Green (270) 781-1061 OHIO CAT www.OhioCAT.com Richwood (888) 446-4658 WILSON EQUIPMENT CO. www.wilsonequipment.com Corbin (606) 528-0700 Lexington (859) 254-6443 Prestonsburg (606) 874-8036

OHIO OHIO CAT www.OhioCAT.com Broadview Heights (800) 837-6200 Sharonville (888) 332-4658 (Sales & Service) (888) RENT-441 (Rental) Columbus (888) 441-4658 (Sales & Service) (888) RENT-441 (Rental) Perrysburg (888) 339-4658 (Sales & Service) (888) RENT-441 (Rental)

OHIO OHIO CAT Troy (888) 330-4658 Youngstown (800) 837-6203 Cadiz (800) 837-6204 Canton (800) 837-6207 Zanesville (800) 837-6205 N. Canton (888) 736-8443 Oakwood Village (800) 633-1020

MICHIGAN MILLER-BRADFORD & RISBERG, INC. www.miller-bradford.com Negaunee 800-562-9770

Built from a lineage of market leaders for over 60 years

Made in the USA

Page 78 • May 26, 2012 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide

YOUR DIRECT LINK

to the Largest Manufacturers of High Quality

UNDERCARRIAGE!

ONLY YO U C A N P R E V E N T W I L D FI R E S. www.smokeybear.com

Rotozip Breaks Down Barriers to Spiral Saws With Rotosaw

All Makes & Models Heavy Equipment Complete Undercarriage Systems Track Chains and Groups, Sprockets, Segments,Track Shoes, Idlers, Rollers. Full Warranty. Nationwide direct same-day shipping or installation at our facility.

We will not be Undersold by Anyone on Any Product of Comparable Quality! Call Today for a Quote!

563.872.4112

PH:: 563.872.4112 | FAX: FAX:: 563.872.5058 58 | PARTS@JJSCHECKEL.COM P PAR AR RTS@JJSCHECKEL.COM

21582 HWY 62,, BELLEVUE,, IOWA IOWA | WWW.JJSCHECKEL.COM WWW W.JJSCHECKEL.COM

212-689-8585 Reference #:568974

The Spiral Saw system features improved ergonomics and is specifically designed to tackle plunge and freehand cuts in nearly any building material, including tile, wood, plastic, laminate, underlayment and drywall.

RotoZip culminates 40 years of delivering professional-grade cutting tools with the introduction of its most compact, lightweight Spiral Saw, the RotoSaw. The Spiral Saw system features improved ergonomics and is specifically designed to tackle plunge and freehand cuts in nearly any building material, including tile, wood, plastic, laminate, underlayment and drywall. The RotoSaw is optimized for a broad range of applications and is compatible with more than 20 different cutting bits. Its available dust collection system greatly reduces airborne debris while special venting works to keep dust away from the user. The system maximizes visibility and accuracy while keeping the work space clean. This is especially important when working in finished spaces, making the RotoSaw a versatile solution for today’s remodeling professionals, skilled DIYers and drywall installers, according to the manufacturer. The RotoSaw is powered by a 5.5-amp MagnaCore motor that handles even the toughest materials without bogging down. Advanced electronics sense if the motor is being overloaded and instantly slow down the tool, preventing it from burning out. The compact RotoSaw offers best-in-class power-to-weight ratio. This, combined with an innovative dual-grip zone housing,

allows for comfortable handling and cutting control in horizontal and vertical applications. “Over the past 40 years, we’ve combined our expert knowledge with the latest technology in order to expand beyond drywall, providing users with the versatility and power to achieve superior results in virtually any building material,” said Randall Coe, marketing director, RotoZip. “With the new RotoSaw, today’s professional tradesmen and do-it-yourselfers can make quick plunge and freehand cuts with unrivaled control and accuracy — no more workarounds, no more barriers.” The RotoSaw’s universal depth guide enables users to pair the RotoSaw with compatible attachments and accessories, transforming the RotoSaw into a spiral system capable of creating precise overhead cuts for can light installation or slicing through wall tile to add a bathroom towel bar. Other RotoSaw features include serviceable motor brushes and a bump switch for quick tool power-down. The RotoSaw is compatible with all RotoZip ZIP BITS and XBITS. It will be available in retail stores this May at a MSRP of $69. For more information, call 877ROTOZIP or visit www.ROTOZIP.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 79

MUSCLE

MIGHTY

STAR EQUIPMENT LTD. 1401 2nd Avenue des Moines, iA 50314 (515) 283-2215 FAx: (515) 283-0295 (800) 369-2215

2625 W. Airline HWy. WAterloo, iA 50703 Dealer (319) 236-6830 FAx: (319) 236-6834 (800) 791-9249

2950 6tH street sW CedAr rApids, iA 52404 Imprint (319) 365-5139 FAx: (319) 365-6726 (800) 728-5139

2100 e. linColn WAy AMes, iA 50010 (515) 233-9500 FAx: (515) 233-9505 (866) 856-2312

Page 80 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95, Color Ad $145 96” EXTREME SERVICE DITCHING BUCKET V Design or Straight Cutting Edge Attachments International 24 Hr Shipping Call 218-863-6444 or800-705-6605

2002 Bombardier SW48, 100HP Diesel, 473 Hrs, 2955 Miles, Cab & Heat, Tracks are in Great Shape ...........................................$17,500 10-11 PK 763/428-4107

2002 John Deere 250 Open Station, 1810 Hrs, weight kit, KV0250A351153 ...........$12,500 10-11 PK 763/444-8873

2007 Cat 305CR, 2265 Hrs, s/n HWJ01500, EROPS, Heat, A/C, Hyd. Thumb, Blade ....$41,500 Courts Machinery • 507/678-2752 11-12 PK

11-12 EB

2009 Grove RT 880E, 80 Ton Rough Terrain, Tier 3 Cummins, 41’-128’ Main Boom, 33’-56’ Jib, Auxiliary Winch, Block, Ball, 18000 Lb Hydraulic Removable Counterweight, A/C and Tilt Cab, FOB Gary, IN..............................................................Call Call Andy at 216-316-1511 11-12 EB

2004 Cat 730, s/n AGF00953, 30 Ton, Good Tires, Good Bed, 8442 Hours, Two Available.....$119,000 11-12 JM Call David 219-696-5680

2006 Doosan DL400, s/n 5099, Cab, Heat, AC & Bucket, 2859 Hrs ......................................$115,000 11-12 JM Call David 219-696-5680

1991 John Deere 300D, S/N 775834, Open ROPS..........................................................$19,000 Call 502/456-4050 Ask for Melissa or Albert 11-12 EB

2009 Kawasaki 90ZV Loader, w/550 Hrs on Cummins QSM11 Engine, 75%+Rubber, Like New Call 888-9-RACKERS 11-12 JM Ask for Gary or Matt

Atlas Copco ROC F9 Hyd Drill, 5046 Hrs on Cat C9 Engine and 2600 Impact Hrs Call 888-9-RACKERS 11-12 JM Ask for Gary or Matt

1994 Dresser 510C, 80 HP, 1.75 yd Bucket, cab, new tires...............................................POR Diesel Machinery 1-800/456-4005 Ask for Don or Herb 10-11 PK

2008 Ausa Dumper, s/n 09259426, 110 Hrs, 1.37 Cu Yrd Dumper, 13 Hp Hatz Diesel, 2wd...........................$7,000 11-12 JM Call Brian @ 630-739-7770

2006 Case CX210, s/n DAC213006, 4650 Hours, 18' 8" Boom Arm, 9' 10", Shoe 3-Bar Steel 24", Control Pattern Valve, Dbl Acting Aux Hyd, Cplr ..........................$89,000 11-12 JM Call Mark @ 630-739-7770

2006 Case CX330, s/n N6SAP7025, 5100 Hrs, Cab w/Heat / AC, Boom 21’2”, Arm 13’3”, 31.5” -3Bar Steel Shoes, Control Selector Valve, Kent Coupler .....................................................$137,000 11-12 JM Call Mark @ 630-739-7770

2011 J.D. 3720 Compact Tractor, 14 hrs, 4WD, CHA, 43.2 HP, Wakeene KS, E/N 1053717 ....POR Call 1-800-950-3321, Ask for Larry Briand

2005 Cat 305CR, 3042 Hrs, Mitsubishi Diesel Recently Rebuilt, 42 HP, 11,000 Lbs, FOB Salina, Ks................................................$39,500

2006 JCB 3CX Side Shift.....................$54,500

1993 Muv-all Double Drop, Hydraulic Sliding Tail Trailer, 102” Wide, 50’ O.A.L., 30 Ton Capacity, 24” Aluminum Pullouts, Hydraulic Jack Stands, 12,000# Winch in Slope...$15,000

Call Kirk Nelson at 785-823-6378 www.sellersequipment.com

Email: attintl@loretel.net www.attachmentsintl.com 10-11 AP

New 2012 Grove RT 765E-2, 65 Ton Rough Terrain, Tier4 Cummins, 36’-110’ Main Boom, 33’-56’ Jib, Auxiliary Winch, A/C Cab, Block, Ball, Auxiliary Light & Convenience Package, FOB Cleveland, OH ..Call Call Andy at 216-316-1511

11-12 JM

(Dick/Larry) Toll Free 1-888-560-2787 Midwest Trailers Plus, Inc. 10-11 PK

See our full line of used equipment at www.whitestarmachinery.com 10-11 JM

2001 CAT 420D Tractor Loader Backhoe, 3459 hrs, Tulsa OK, E/N 1051719 ......................$37,950 Call 1-800-950-3321 See our full line of used equipment at 10-11 JM www.whitestarmachinery.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 81

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

2009 New Holland L175, Cab w/ Heat & AC, 324 Hrs ..............................................................$24,940 Call Steve Samosky 262-373-2151 11-12 JM

2005 I-R SD45D, 305 Hrs, 54” Smooth Drum, Cummins 80HP Turbo Diesel .....................$28,750 Call Steve Samosky 262-373-2151 11-12 JM

2010 Wacker Neuson 3001, 50 Hrs, 6613# Payload Capacity, 36.6 HP.........................$34,900 Call Steve Samosky 262-373-2151 11-12 JM

2010 Link-Belt 160X2, 435 Hrs, 120HP, Geith Pin Grabber ....................................................$126,700 Call Steve Samosky 262-373-2151 11-12 JM

2010 Gehl 5240E, 453.9 Hrs, Dual Hand Control, Single Speed, New Tires, Engine Block Heater, No Bucket, Stk# 218405 ............................$18,800 11-12 PK Dan Ribbens 515-253-9048

2008 New Holland L180, 1635 Hrs, Cab w/ Heat, 74HP New Holland Diesel ..........................$23,900 Call Steve Samosky 262-373-2151 11-12 JM

2005 Takeuchi TB125, 2230 Hrs, 6165 Lbs. Operating Weight, Dozer Blade..................$20,250 Call Steve Samosky 262-373-2151 11-12 JM

2010 New Holland L185 Skid Steer.........$32,500 & 2002 Towmaster Trailer T-24 Trailer G.V.W.R, 31,240 Lbs, Air Brakes .................................$6,500 Call Gary Mertz 314-895-9500 11-12 JM

Here's how the BARGAIN ADS Work:

Gehl CTL-70 Track Machine, Serial# 21400743, w/Cab Enclosure Heat A/C, Powertach 2 Speed Joystick Controls ........................................$32,500 11-12 PK Mark 612-759-1450

Next Issue Closes May 31st SEE YOUR BARGAIN AD IN COLOR. ONLY $50 EXTRA FOR TWO INSERTIONS

• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $95 per ad, $50 additional for color. • Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at 800/523-2200

Page 82 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLASSIFIEDS AERIAL LIFTS

COMPACTION EQUIPMENT

Manlifts

Pneumatic Rollers

GRADALL / LULL Sales - Service - Training Modern Equipment Sales & Rental 800-445-4381

2005 Hamm HD130, good condition, 1998 hours ...................................$59,950. 361-289-0066

ASPHALT EQUIPMENT

CRANES

Asphalt Rollers

Crane Inspections

2006 JCB Vibromax VM115D, 80’’, 25,000 lb combination roller, bolt on pad foot, very good, 598 hours. ........$94,395. 2010 Dynapac CC324, 71’’, 20,000 lb, open canopy w/ROPS, excellent, 641 hours ..................................$72,975. Casey Equipment Co. 847-437-8686

Milling Machines

ALL TYPES OF CRANES INSPECTED AND CERTIFIED Accredited by the US Dept. of Labor Under 29CFR Part 1919 and Accredited by CALOSHA Call 215-639-2579 Atlantic Crane Inspection Services Visit us at www.atlanticcrane.com

2006 Dynapac PL2000, 80’’ planer, front loading conveyor, good condition, 3423 hours .... ................................$183,750. 2007 Dynapac PL2000, 80’’ planer, front loading conveyor, good condition, 2525 hours .... ................................$240,975.

CRAWLER TRACTORS

Casey Equipment Co. 847-437-8686

2006 John Deere 650J, LGP, cab w/AC, 128’’ blade, 3426 hours ..........................$74,500.

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

2007 JCB J5260, 60,000 lb, quick coupler, very good condition, 2535 hours ......$103,425. 2007 JCB J5260, 60,000 lb., bucket, very good condition, 953 hours ................$149,500. 2008 JCB J2140, 30,000 lb., zero tail swing, bucket, very good condition, 1157 hours .... ..................................$93,390.

Wheel Loaders NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381

Mini Excavators

2009 John Deere 444K, A/C. GP bucket, hyd. coupler, Joystick, cab, 600 hours ........ ................................$117,500.

NH Construction Equipment

316-945-1015

New & Used Parts & Service

2006 John Deere 624J, A/C, cab, ride control, 12,639 hours ...................................$99,500.

Casey Equipment Co. 847-437-8686

Modern Equipment Sales & Rental 800-445-4381

FORKLIFTS

316-945-1015

Track Loaders 2006 John Deere CT322, ROPS, aux. hyds, 2778 hours ..................................$25,000.

Industrial Forklifts 316-945-1015 GRADALL / LULL Sales - Service - Training

REAL ESTATE

Modern Equipment Sales & Rental 800-445-4381

COMMERCIAL PROPERTY!

Rough Terrain Forklifts

OIL BOOM TOWN! Williston, North Dakota 10 Acres, 3 phase power, well, septic, graded and graveled

EXCAVATORS

2010 JCB 930, canopy model, 4WD, 6000 lb lift capacity, 22 ‘ mast, 48’’ forks. Pictures available. Low hours ................Call

Hydraulic Excavators

908-625-0697

Large Overseas Order 10 Extra Units Retails: $3,100 Blowout Special: $2,000

2008 Hitachi ZX270LC, 32’’ pads, cab, A/C, Pilot controls, 2229 hours ..............$235,000.

LOADERS

Call 218-863-6445 or 800-7056605 Email: attintl@loretel.net www.attachmentsintl.com

316-945-1015

ATTACHMENTS Attachments - Misc. ASPHALT CUTTERS EXTREME SERVICE

Crawler Tractors

316-945-1015

Asking $685,000.

2008 Yanmar CBL 40C, includes PTO, 3 pt. hitch, backhoe, loader bucket attached w/skid plate, great condition, 216 hours ..................$32,500. Vermeer Iowa 641-628-2000

Backhoe Loaders

2008 Hitachi ZX270LC, 32’’ pads, A/C, cab, long arm, pilot controls, 2229 hours $235,000.

2008 Yanmar CBL40A, 3 pt hitch, PTO, backhoe loader bucket with skid plate, very good condition, 216 hours ....................................$31,000.

316-945-1015

641-628-2000

BORING EQUIPMENT Boring

Real Estate for Sale

NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381

Skid Steer Loaders 2007 JCB 1110T, canopy model, SSL 17’7’’ width, Servo controls, Pictures available, 980 hours ..........................$32,000. Farm-Rite Inc. 908/625-0697

Call Edward 701-339-8762 See us at www.parkurtruck.com

TRAILERS

TRAINING

TRENCHING EQUIPMENT

Operator Training

Trenchers

Are your operators compliant with Federal Standards, OSHA, ANSI, ISO?

ly rebuilt, backhoe and trencher,

1990 Ditch Witch 7610, recentgood condition....Call

MODERN GROUP offers training for:

Ditch Witch 2555X, s/n 0331, multiple blades available, good

Front-end Loaders & Backhoes

condition, 211 hours...$15,000.

Aerial work platforms (AWP) (Boom & Scissor Lifts)

501-316-3200

WATER EQUIPMENT

Rough Terrain Forklifts (Gradall, Lull, JCB)

Water Wagons

Skid Steer Loaders

WATER TANK INSERT

For information, pricing or reservations: Call 1-800-223-3827 www.moderngroup.com

FOR 300D Fits First Series Only $25,000

All prices include Trainer, travel and material NO HIDDEN COSTS

316-945-1015

Subscribe to CEG today... Get an edge on your competition! construction equipment guide Midwest edition subscribers are the best informed about construction news, construction equipment, sales, auctions, equipment prices, trends and changes in the industry and activities of its people. call toll free! We now accept visa, Mastercard & american express!

SUBSCRIPTIONS:

One Year $65

(within United States & Puerto Rico Only)

cardMeMber’S naMe _________________________________________________________ cOMpanY naMe _______________________________________________________________ Street____________________________________ phOne nO. ________________________ citY ______________________________________State _______ zip ________________ tYpe Of buSineSS _____________________________________________________________

Trailers - Misc. 2012 Felling FT12DT, 12’ dump trailers, 26k axles, scissor hoist, 80’’ wide, 5’ ramps, new .......... ....................................$8,984. 2011 Felling FT14-2T, demo, 22’ + 4’ deck over tilt, 7k axles, excellent ....................$11,500. 1998 Towmaster T-20, 19’ + 5’ deck over with 10k tandem duals, good ..................$6,500. Toppers Plus 507-387-7376

check enclosed

viSa

MaStercard

american express

card nuMber

exp. date (Mo./Yr.) Signature Of authOrized cardhOlder

TOLL FREE ®

1-800/523-2200 FAX 215/885-2910

470 Maryland dr. • ft. Washington, pa 19034 email: circulation@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 83

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. NEED NOW BULLDOZER D7G WITH RIPPER OR WINCH USER USA NO SALESMEN PLEASE. NO OVERSEES CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL:JEANMAURICEBOUTIN @BULLDOZERJM.COM –––––––––––––––––––––––––––––––– CAT WHEEL LOADERS 966 & 980 OLDER MODELS | MACHINES MUST BE GOOD LOOKING AND IN WORKING CONDITION WITH OLD PAINT. WHOLESALE PRICE CONTACT: MATT PHONE: 1 800 660 5453 FAX: 415 455 9945 EMAIL: MOSIUHWU123@YAHOO.COM –––––––––––––––––––––––––––––––– BACKHOE 580SE (CASE) | WANT TO KNOW THE PRICE ON IT CONTACT: RAVI PHONE: 0125642413 EMAIL: MRAVIN_54@HOTMAIL.COM –––––––––––––––––––––––––––––––– CATERPILLAR WHEEL LOADER 920, 930, 950 | REQUIRED USED MACHINES TO IKRAM ULLAH KHAN & COMPANY | REGULAR REQUIREMENT OF MENTIONED MACHINES. (WE BUY FOR OUR OWN STOCK TIME TO TIME) MARKET MEET MACHINERY: CAT WHEEL LOADERS 910, 920, 930, 950, 950B, E & 966D, E AND 966F. CONTACT: IKRAM KHAN PHONE: +923002831078 EMAIL: IUK.IUKCO@GMAIL.COM –––––––––––––––––––––––––––––––– NEED GEAR #448/31105 FOR JCB LOADER 407B-ZX USED OR NEW ASAP. CONTACT: NORM EMAIL: NORM.BLAIS@COGECO.CA –––––––––––––––––––––––––––––––– HORIZONAL GRINDER CONTACT: JOE TURNER PHONE: 740-357-3685 FAX: 740-858-2700 EMAIL: LITJOE063@AOL.COM –––––––––––––––––––––––––––––––– CATERPILLAR D8K DOZERS | WE ARE LOOKING TO PURCHASE CATERPILLAR D8K DOZERS (SERIAL NUMBER 12XXX UP) AS WELL AS THE FOLLOWING CATERPILLAR WHEEL LOADERS. MACHINES MUST BE GOOD LOOKING AND IN WORKING CONDITION WITH OLD PAINT. PLEASE OFFER ME WHAT YOU HAVE WITH BUNCH OF PICTURES, YEAR MODEL, SERIAL NUMBER, MACHINE CONDITION AND FINAL OFFER PRICE. CAT LOADERS: --------------------- 910, 920, 930, 936E, 936F, 938G 950B, 950C, 950E, 950F, 950G, 966C, 966D, 966E, 966F, 966G, 966H 980C (1987 UP), 980F, 980G CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL:SALE@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– BUCKET TRUCK | CONTACT: RAYS TREE SERVICE EMAIL: RAYSTREE1023@GMAIL.COM ––––––––––––––––––––––––––––––––

ZERO TURN LAWN MOWER | LOOKING FOR COMMERICAL 60" ZERO TURN LAWN MOWER. CONTACT: PAUL ROMANOWSKI PHONE: 51888335585 EMAIL:PAULROMO@FRONTIERNET.NET –––––––––––––––––––––––––––––––– PNEUMATIC TIRE ROLLER | LEEBOY 420, ANDERS, BASIC ROLLERS WANTED ALSO 2 OR 4 TON HOT BOXES ALL TYPE ASPHALT / SEALCOAT EQUIPMENT WANTED. SEND PICS CONTACT: JAMES MANN PHONE: 404-273-9424 FAX: 770-306-9377 EMAIL:JAMES2525@MSN.COM –––––––––––––––––––––––––––––––– 54" BUCKET FOR CATERPILLAR 330BL EXCAVATOR | S/N 6DR01140, WITH DFAMILY LINKAGE. I THINK THAT THE CORRECT PART NO IS: 132-5047. IF INTERESTED WE WOULD BE OPEN TO TRADING THE 42” BUCKET, PART NO: 132-5045 THAT WOULD BE COMING OFF OF THE MACHINE. THE CUSTOMER WOULD ALSO CONSIDER A 60”. CONTACT: WENDELL CAIN PHONE: 770-381-8984 FAX: 770-381-6977 EMAIL:WENDELL@CAINANDTODD.COM –––––––––––––––––––––––––––––––– 2 265X25 TIRES NEW OR AT LEAST 40% CONTACT: STEVE FONS FAX: 810-231-5188 EMAIL: SFONS@FONSONINC.COM –––––––––––––––––––––––––––––––– JRB COUPLER FOR JD 544G AND BUCKET CONTACT: KEN VALENTINE PHONE: 330-219-1003 FAX: 330-856-3935 EMAIL:KRV8815@MSN.COM –––––––––––––––––––––––––––––––– NEEDED ALL THE TIME USER USA NO SALESMAN BUL D3 D4 D5 D6 D7 D8 D9 D10 1990 AND UP RIPPER WINCH CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL:JEANMAURICEBOUTIN @BULLDOZERJM.COM –––––––––––––––––––––––––––––––– HITACHI EXCAVATORS EX200, EX400 | , PLEASE INFORM ME WHEN AVAILABLE FOR SALE. CONTACT: NAQIB KHAN PHONE: +92-333-3298751 EMAIL:NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– CATERPILLAR WHEEL LOADER 950, 950B, 950E, 966D, 966E, 966F. IF AVAILABLE, PLEASE LET ME KNOW. CONTACT: HIDAYAT KHAN PHONE: +92-345-8818803 EMAIL:NAQIB_KHANINTRCO @HOTMAIL.COM –––––––––––––––––––––––––––––––– BOBCAT EXCAVATOR E60 | I WANT A QUOTE FOR THE USED BOBCAT E60 THAT YOU HAVE. AND THE SHIPPING ESTIMATED FOR PUERTO RICO, THE ZIP CODE IS 00987. CONTACT: LEYLA SANTIAGO PHONE: 787-226-4415 EMAIL: LEYLASANTIAGO@HOTMAIL.COM ––––––––––––––––––––––––––––––––

REQUIRED USED MACHINES TO IKRAM ULLAH KHAN & COMPANY | REGULAR REQUIREMENT OF MENTIONED MACHINES. (WE BUY FOR OUR OWN STOCK FROM TIME TO TIME) MARKET MEET MACHINERY: CAT 910, 920, 930, 950, 950B, E & 966D, E AND 966F. CAT GRADER 140G S/N:10, 000 UP. DYNAPAC ROLLERS CA251D, CA262D, CA301D [PAD FOOT TYPE ALSO WORKS] JCB TELEHANDLER 550 YEAR 1999~2005 HITACHI EXCAVATOR EX2001, EX100WD-1, EX60WD-1, UH07-7, UH083 KOMATSU EXCAVATOR PC 2006, -7. IF AVAILABLE ANY TIME CONTACT ME. WWW.IUKCO.COM CONTACT: IKRAM KHAN PHONE: +92-300-2831078 EMAIL: IUKANDCO@GMAIL.COM –––––––––––––––––––––––––––––––– BULLDOZER D9N AND D9R WITH RIPPER CONTACT: OUFI PHONE: 966 5430185141 FAX: 966 27512024 | EMAIL:ALOUFI01@HOTMAIL.COM –––––––––––––––––––––––––––––––– GEARINTERNAL | NEED INTERNAL 1 GEAR#448/31105 AND 2 OILSEALS#904/50033 FOR JCB407B-ZX LOADER#0757635, A USED GEAR WOULD WORK TOO. THANKS CONTACT: NORM BLAIS PHONE: 1-705-474-3943 FAX: 1-705-474-8891 | EMAIL:NORM.BLAIS@COGECO.CA –––––––––––––––––––––––––––––––– KAWASAKI LOADERS | WE ARE LOOKING TO PURCHASE THE FOLLOWING KAWASAKI WHEEL LOADERS. IF YOU HAVE ANY, PLEASE OFFER IT TO ME WITH COMPLETE SET OF PICTURES, YEAR MODEL, SERIAL NUMBER, MACHINE CONDITION AND LAST OFFER PRICE. 50Z-V 60Z-V 65Z-IV, 65ZV 70Z-II, 70Z-IV, 70Z-V 80Z-II, 80Z-IV, 80ZV 85Z-II, 85Z-IV, 85Z-V 90Z-II, 90Z-IV, 90ZV 95Z-II, 95Z-IV, 95Z-V CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL:SALE@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– WANTED 4 IN 1 72 IN BUCKET TO FIT GEHL CTL 170 TRACK LOADER CONTACT: DAVE PHONE: 785-842-9033 EMAIL: FMH1010@AOL.COM –––––––––––––––––––––––––––––––– SKID LOADER | LOOKING FOR AN OLDER MODEL SKID LOADER. NEEDS TO HAVE A 4K LBS LIFT RATING CONTACT: MIKE DEMOND PHONE: 775-853-1058 FAX: 775-455-4196 EMAIL:SERVICE@MBCRUSHER.COM –––––––––––––––––––––––––––––––– RAM SEAL/PISTON | NEED THE LEFT & RIGHT RAM SEAL/ PISTON FOR THE LEFT & RIGHT STOCK PILER... MACHINE EXTEC SCREEN PLANT MODEL # 5000 SERIAL # 5713 YEAR 1997. CONTACT: KURT PHILBERT PHONE: 718-530-5717 EMAIL: K18LANDER2@HOTMAIL.COM ––––––––––––––––––––––––––––––––

JOHN DEERE 450 EXCAVATOR | 2005 OR NEWER, 5000 PLUS IN HOURS, 72 INCH BUCKET CONTACT: KEVIN PHONE: 817-379-1340 FAX: 817-379-2734 EMAIL:KEVIN@BREQUIPMENTCO.COM –––––––––––––––––––––––––––––––– KOMATSU PC 400 EXCAVATOR | 2005 OR NEWER, 5000 PLUS IN HOURS, 72 INCH BUCKET CONTACT: MILO PARKS PHONE: 214-212-7026 FAX: 817-379-2734 EMAIL: MILO@BREQUIPMENTCO.COM –––––––––––––––––––––––––––––––– 10054 AND 8042 SKY TRACK | BUY NEW CONTACT: MANUEL PHONE: 817 572 2250 FAX: 817 483 3973 EMAIL: MANUEL@EMPIREROOFING.COM –––––––––––––––––––––––––––––––– ROAD WIDENER CONTACT: DWIGHT PHIBBS PHONE: 905-382-2464 EMAIL: DWIGHTLPHIBBS@HOTMAIL.COM –––––––––––––––––––––––––––––––– MICH & VOLVO LOADER CONTACT: WOODY RICHARDSON PHONE: 276-629-2800 FAX: 276-629-2899 EMAIL: WOODYRICHARDSON@COMCAST.NET –––––––––––––––––––––––––––––––– NEED ALL THE TIME BULLDOZER D6 D7 D8 D9 D10 155 355 375 WITH RIPPER USER USA 1996AND UP CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN @BULLDOZERJM.COM –––––––––––––––––––––––––––––––– **WANTED** BOBCAT BRAND CONSTRUCTION EQUIPMENT LOCATED IN THE S.E. UNITED STATES. PREFER LARGE FRAME MACHINES WITH GOLD PACKAGE; S320, S300, S250, T320, T300, T250, BUT WILL CONSIDER ANY MAKE OR MODEL BOBCAT YOU HAVE FOR SALE. PLEASE SEND RECENT PHOTOS AND ASKING PRICE. **DEALERS NEED NOT RESPOND** CONTACT: WARREN EMAIL: TWOPETIES@AOL.COM –––––––––––––––––––––––––––––––– MKT & ICE PILE HAMMERS | WE ARE SEEKING VIBRATORY PILE HAMMERS MANUFACTURED BY MKT, ICE AND OTHER REPUTABLE MANUFACTURERS. QUICK CASH AVAILABLE FOR YOUR USED PILE HAMMERS. CONTACT: JEFF LAWSON PHONE: 864-542-4369 EMAIL: JLAWSON29321@CHARTER.NET –––––––––––––––––––––––––––––––– JCB 540170 & CAT TH580B | WE ARE LOOKING FOR JCB 540-170 AND CAT TH580B TELESCOPIC HANDLERS ATTACHED W/ FORK & BKT. MACHINES MUST BE IN GOOD WORKING CONDITION AND READY TO WORK. IF YOU HAVE ANY, PLEASE SEND COMPLETE SET OF PICTURES, YEAR MODEL, SERIAL NUMBER, MACHINE CONDITION, LOCATION & OFFER PRICE. CONTACT: AIMN BLBOL

PHONE: +971504814823 FAX: +97165355291 EMAIL: SALE@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– CATERPILLAR 330CL | 3000 HOURS, CLEAN WORK READY, WHOLESALE ONLY, EAST COAST LOCATION, GOING TO NEW ENGLAND CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMIEQUIP@YAHOO.COM –––––––––––––––––––––––––––––––– KOMATSU BR380JG1 TRACK JAW CRUSHER | CLEAN, LOW HOUR, LATE MODEL, WORK READY CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– DETROIT & CAT PARTS | DETROIT ENGINE PARTS R5229380.........INJECTOR ASSEMBLY R5228770.........INJECTOR ASSEMBLY R5228760.........INJECTOR ASSEMBLY R5228900.........INJECTOR ASSEMBLY CAT PART NUMBER PLUNGER 7W 5929 PLUNGER 4P 9830 PLUNGER 1W 6541 CONTACT: PEDRO EMAIL: PEDRO_D17@YAHOO.COM –––––––––––––––––––––––––––––––– CATERPILLAR 160H | WE ARE LOOKING TO PURCHASE SEVERAL UNITS OF THE FOLLOWING CATERPILLAR MOTOR GRADERS. ALL GRADERS MUST BE IN GOOD WORKING CONDITION. IF YOU HAVE ANY, PLEASE PROVIDE A COMPLETE SET OF PICTURES, YEAR, MODEL, SERIAL NUMBER, MACHINE CONDITION AND LAST OFFER PRICE. CAT 12G (1977 - 1995) CAT 140G (1987 - 1995) CAT 140H (2000 - 2003) CAT 14G (1978 - 1995) CAT 14H (1995 - 2000) CAT 160H CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL: SALE@ALWAFAEQUIPMENT.COM| –––––––––––––––––––––––––––––––– NEED BULLDOZER USER USA KOMASTU D85 D135 D155 375 BULL D6 D7 D8 D9 D10 1997 AND UP CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN @BULLDOZERJM.COM –––––––––––––––––––––––––––––––– WANT TO TRADE (4) 295X35 TIRES WITH RIMS FOR 295X29 USED TIRES CONTACT: K SANSALONE PHONE: 856-297-4758 FAX: 856-362-5602 EMAIL: KEVIN@SANSALONEEXCAVATING.COM –––––––––––––––––––––––––––––––– REQUIRED USED MACHINES TO IKRAM ULLAH KHAN & COMPANY | REGULAR REQUIREMENT OF MENTIONED MACHINES. (WE BUY FOR OUR STOCK TIME TO TIME) MARKET MEET MACHINERY: CAT 920.930.950B, E & 966D, E CAT 140G S/N:10,000 UP. DYNAPAC CA251D, CA262D, CA301D [PAD FOOT TYPE ALSO WORKS] JCB TELEHANDLER 550 YEAR 1999~2005 HITACHI EXCAVATOR EX200-1,EX100WD-1,

EX60WD-1,UH07-7,UH083 KOMATSU EXCAVATOR PC 200-6,-7. WWW.IUKCO.COM CONTACT: IKRAM KHAN PHONE: +92-300-2831078 EMAIL: IUKANDCO@GMAIL.COM –––––––––––––––––––––––––––––––– BOBCAT S130 SKID STEER | ABOUT 30 UNITS YOUG LOW HOUR BOBCAT S 130 SKID STEER CONTACT: KAM PENG TING PHONE: +6019 3211233 FAX: +603 79803422 EMAIL: TINGKAMPENG@GMAIL.COM –––––––––––––––––––––––––––––––– CATERPILLAR WHEEL LOADERS AND OTHER MENTIONED MACHINES | REGULAR REQUIREMENT OF MENTIONED MACHINES. (WE BUY FOR OUR STOCK TIME TO TIME) MARKET MEET MACHINERY: CAT 920.930.950B, E & 966D,E CAT 140G S/N:10,000 UP. DYNAPAC CA251D,CA262D,CA301D [PAD FOOT TYPE ALSO WORKS] JCB TELEHANDLER 550 YEAR 1999~2005 HITACHI EXCAVATOR EX200-1,EX100WD-1, EX60WD-1,UH07-7,UH083 KOMATSU EXCAVATOR PC 200-6,-7. WWW.IUKCO.COM CONTACT: MR MAHSOOD PHONE: 0092-313-2002763 EMAIL: INFO@IUKCO.COM –––––––––––––––––––––––––––––––– WE NEED A FRONT MOUNT SCARIFIER FOR A NORAM 65E. CONTACT: JAMI SALTER PHONE: 318-343-6700 EMAIL: JSALTER@SCOTTCOMPANIES.COM –––––––––––––––––––––––––––––––– NEED ALL THE TIME BULLDOZER D6D7D8D9D10 2005 UP AND LOADER GRADER USER 2005 LOW HOURS USER USA CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN @BULLDOZERJM.COM –––––––––––––––––––––––––––––––– LOOKING FOR A USED 3500 LB. DEMOLITION BALL. CONTACT: JAMES SIMS PHONE: 770-886-8319 FAX: 770-886-4715 EMAIL: JSIMSDEMOLITION@AOL.COM –––––––––––––––––––––––––––––––– 2003 42M CONCRETE BOOM PUMP LOOK HERE: HTTP://NESD.CRAIGSLIST.ORG/GRD/290 4049031.HTML CONTACT: SCOTT PHONE: 724 323-4526 EMAIL: APPALACHIAN76051.SCOTT@AOL.COM –––––––––––––––––––––––––––––––– CAISSON ROCK BIT 36” I BEAMS | WANT TO BUY: I NEED A USED CAISSON ROCK BIT TO DRILL ROCK SOCKETS FOR 36” I BEAMS. PLEASE RETURN EMAIL PRICE & PHOTOS. CONTACT: CLIFF PHONE: 724 323-4526 EMAIL: CBERTOCCI@AOL.COM ––––––––––––––––––––––––––––––––

Page 84 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Corinna, ME Sat., June 2, 2012 For: Late Model Construction Equipment, Trucks, Support, Attachments • San Bernardino, CA Sat., June 2, 2012 For: Late Model Trucks, Trailers, Construction Equipment • Detroit, MI Tues., June 5, 2012 For: Construction and Support Equipment • Detroit, MI Wed., June 6, 2012 For: Secured Party Auction, Trucks Tractors, Dump Trailers, Gravel Trains • White Plains, NY Sat., June 9, 2012 For: Construction Equipment and Support Equipment • White Plains, NY Sat., June 9, 2012 For: Complete Liquidation of Top Notch Construction • Sacramento, CA Sat., June 9, 2012 For: Large Construction Rental Fleet Auction • Portland, OR Tues., June 12, 2012 For: Late Model Construction Equipment, Support, Trucks, Trailers • Houston, TX Wed., June 13, 2012 For: Rental Return Construction Equipment, Aerials, Trucks, Support, Attachments • Houston, TX Thurs., June 14, 2012 For: Hertz Equipment - Over 450 Pieces of Construction Equipment • Queretaro, Mexico Fri., June 15, 2012 For: New and Used Cat Construction Equipment, Trucks, Support, Attachments • El Paso, TX Sat., June 16, 2012 For: Concrete Equipment, Plants, Trucks, Construction & Support • Atlantic City, NJ Sat., June 23, 2012 For: Construction Equipment, Trucks, Support, Attachments • Atlanta, GA Wed., June 27, 2012 For: Truck Tractors, Van Trailers, Construction & Support Equipment • Chicago, IL Fri.-Sat., June 29-30, 2012 For: 2 Day Complete Liquidation – Trucks, Trailers, Cat engines, Cat Components

• Canastota, NY Sat., July 14, 2012 For: Construction and Support Equipment, Aerial Lifts, Trucks, Trailers • Westminster, VT Sun, July 15, 2012 For: Complete Liquidation of Santa’s Land Amusement Park: Running Trains, MerryGo-Round, Rides, Real Estate • Racine, WI Sat., August 18, 2012 For: Constructions Equipment, Truck Tractors and Support • Barranquilla, Columbia Sat., November 24, 2012 For: Late Model Construction and Support Equipment RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Northeast, MD June 5, 2012 • Sacramento, CA June 6, 2012 • Detroit, MI June 6, 2012 • Kansas City, MO June 7, 2012 • Denver, CO June 8, 2012 • Los Angeles, CA June 8, 2012 • Houston, TX June 12-13, 2012 • Chehalis, WA June 14, 2012 • Salt Lake City, UT June 18, 2012 • Hartford, CT June 18, 2012 • Nashville, TN June 20, 2012 • Denver, CO June 20, 2012 • Columbus, OH June 21, 2012 • Bozeman, MT June 22, 2012 • Atlanta, GA June 26, 2012 • Albuquerque, NM June 26, 2012 • Statesville, NC June 27, 2012 • Minneapolis, MN June 27, 2012 • Canton, PA June 28, 2012 • Phoenix, AZ June 29, 2012 • Birdsboro, PA June 28, 2012 • St. Louis, MO June 29, 2012 • Anchorage, AK July 17, 2012

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

Coming Auctions • Albuquerque, NM July 18, 2012 • Rocky Mount, VA July 19, 2012 • Boise, ID July 20, 2012 • Las Vegas, NV July 27, 2012 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Portland, OR Thurs., May 31, 2012 For: Construction Equipment • San Bernardino, CA Sat., June 2, 2012 For: Construction Equipment CAT AUCTION SERVICES www.catauctions.com 866-750-9432 • St. Thomas, PA June 28, 2012 For: Charles E. Brake Co. (Complete Dispersal) DARELL DUNKLE & ASSOCIATES AUCTIONEERS INC. www.dunkleauctioneers.com 800-433-6670 • Mancelona, MI Thurs., June 21, 2012 For: Ken Allen Trucking DAVIS AUCTIONS www.davisauctionsinc.com 203-758-4087 • Prospect, CT June 23, 2012 For: Construction Equipment • Prospect, CT August 18, 2012 For: Construction Equipment • Prospect, CT October 13, 2012 For: Construction Equipment • Prospect, CT December 8, 2012 For: Construction Equipment FAHEY SALES AUCTIONEERS & APPRAISERS www.faheysales.com 952-873-2555 • Online Only Closes June 25, 2012 For: Woodworking Equipment and Tools HARTLAND MACHINERY AUCTIONEERS www.hartlandmachinery.com 724-368-9788 • Turtle Creek, PA Wed., June 6, 2012 For: Major Construction Auction

HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Wattsburg, PA Wed., June 6, 2012 For: Surplus Liquidation – Lakeland Aggregates • Cochranton, PA Thurs. June 7, 2012 For: Complete Liquidation W.L. Dunn Construction Company • Portsmouth, VA Wed. June 20, 2012 For: Complete Liquidation Atlantic Cable LLC IRAY AUCTIONS www.iraymn.com 320-968-7230 • Foley, MN Fri., June 8, 2012 • ONLINE ONLY Fri., July 27, 2012 • Foley, MN Fri., September 14, 2012 • Foley, MN Fri., November 30, 2012 IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid! • ONLINE ONLY May 31, 2012 For: Construction Equipment • ONLINE ONLY June 7, 2012 For: Construction Equipment • ONLINE ONLY June 14, 2012 For: Construction Equipment • ONLINE ONLY June 21, 2012 For: Construction Equipment • ONLINE ONLY June 28, 2012 For: Construction Equipment • ONLINE ONLY July 12, 2012 For: Construction Equipment • ONLINE ONLY July 19, 2012 For: Construction Equipment • ONLINE ONLY July 26, 2012 For: Construction Equipment

• ONLINE ONLY Thurs., May 31, 2012 For: Construction Equipment • ONLINE ONLY Thurs., June 14, 2012 For: Construction Equipment

J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085 • Montgomery, AL Wed.-Fri., June 6-8, 2012 For: Construction Equipment, Trucks, Trailers, Forestry Equipment • Montgomery, AL Fri.-Sat., June 15-16, 2012 For: Construction Equipment, Trucks, Trailers, Forestry Equipment MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 800-763-2728

• Pelzer, SC Wed.-Thur., May 30-31, 2012 For: Construction Equipment • Concord. NC Thurs. June 14, 2012 For: One Owner Absolute Auction • Jasper, GA Wed., June 20, 2012 For: Inventory Reduction Auction • Brooklyn, MS Fri.-Sat., June 22-23, 2012 For: 2-Day Construction Equipment Auction MYRON BOWLING AUCTIONEERS, INC. www.myronbowling.com 513-738-3311

• Northern CA Sat., December 15, 2012 For: Construction Equipment, Trucks, Govt. Vehicles

RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395

UTILITY AUCTIONS www.utilityauctions.net 302-530-9103

• Lebanon, TN Sat., June 16, 2012 For: Heavy Equipment, Trucks & Trailers

• Wilmington, DE Fri., June 22, 2012 For: Construction and Utility Equipment

• Online Only June 1-11, 2012 For: Ag, Construction Equipment, Trucks and more! • Online Only June 14-27, 2012 For: Park River Implement • Online Only Wed., July 10-18, 2012 For: Kibble Equipment Inc. • West Fargo, ND Wed., July 25, 2012 For: AgIron 61 Consignment Event – Construction Equipment THE AUCTION COMPANY www.theauctioncompany.net 951-657-5300 • Northern CA Fri.-Sat., June 22-23, 2012 For: Construction Equipment, Trucks, Govt. Vehicles • Southern CA Sat., June 23, 2012 For: Construction Equipment, Trucks, Trailers

• Williamsburg, KY Wed., June 6, 2012 For: Mining and Large Earthmoving Equipment • Ross, OH Thurs., June 7, 2012 For: Job Completion Auction • Chambersburg, PA Fri., June 15, 2012 For: R&D Enterprise Contractors

• Southern CA Sat., December 8, 2012 For: Construction Equipment, Trucks, Trailers

• ONLINE ONLY Thurs., June 28, 2012 For: Construction Equipment

STEFFES AUCTIONEERS INC. www.steffesauctioneers.com 701-237-9173

• Myrtle Beach, SC Thurs., May 24, 2012 For: One Owner Absolute Auction

• Northern CA Sat., November 17, 2012 For: Construction Equipment, Trucks, Govt. Vehicle

• Northern CA Sat., July 28, 2012 For: Times Online Only Sale on Behalf of PG&E • Southern CA Sat., August 18, 2012 For: Construction Equipment, Trucks, Trailers • Northern CA Sat., September 8, 2012 For: Construction Equipment, Trucks, Govt. Vehicles

PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com 860-642-4200

• Southern CA Sat., October 13, 2012 For: Construction Equipment, Trucks, Trailers

• North Franklin, CT Fri.-Sat., June 15-16, 2012 For: Construction Equipment, Support, AG, Trucks, Trailers

• Northern CA Sat., October 13, 2012 For: Construction Equipment, Trucks, Govt. Vehicles

WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat., June 2, 2012 For: Heavy Equipment, Sport & Recreational Auction WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 760-731-7760 • Perris, CA Thurs., June 7, 2012 For: Construction Equipment WILSON’S AUCTION SALES www.wilsonsauction.com 302-422-3454 • Harrington, DE Sat., September 22, 2012 For: Mid-Atlantic Equipment Auction WOLFE INDUSTRIAL AUCTIONS, INC. www.wolfeauctions.com 800-443-9580 • York Springs, PA Fri., June 22, 2012 For: Southern PA Contractors Auction YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Darlington, PA Thurs., June 14, 2012 For: Construction Equipment • Bowe, NH Thurs., June 21, 2012 For: Construction Equipment

Coming Auction page Sponsored by AssetNation

Marketplaces www.SalvageSale.com

www.Asset-Auctions.com

Join Our E-mail List!

www.Energy.AssetNation.com

AssetNation’s network of marketplaces auctions off thousands of vehicles and equipment every week!

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 85

Page 86 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Major Construction Auction

1210 Airbrake Ave., Turtle Creek, Pa 15145

Wednesday, June 6, 2012 Open at 8am/ Sale 10am sharp Preview- Tuesday, June 5th from 9am - 3pm Can’t get to the sale? Live online bidding with Equipmentfacts.com More coming off jobs daily! More info available online. Lots of items not listed!

www.hartlandmachinery.com

CRANES including: 1995 Grove 50 ton hydraulic truck, TMS750B, 1995, s/n 82646, diesel up & down Grove 45 ton hydraulic truck, 8450-G, s/n 11136J24546, 89’ boom, 62’ jib, 2179 hours, diesel up & down Tandano 27.5 ton rough terrain hydraulic, TR250E, s/n 530123, 86’3” boom, 24’6” jib, 2852 hours P&H 115 ton truck, TC8115, mechanical, s/n 41441, 190’ boom, 50’ jib, diesel up & down Lima BLH 60 ton wagon crane, sw/n 5010086028, 80’ boom Grove National Mack boom truck Pettibone Navy crane, 15 ton, 29’ boom Pettibone 15T Pettibone 18 ton picker, 29’ boom Grove 15 ton picker, 45’ boom Pettibone 18 ton swing cab picker (Most cranes have current OSHA inspection)

4 Genie 40’ & 60’ 4 wheel drive, diesel 2 Terex 60’, 4 wheel drive, diesel Condor 66’ Skyjack electric Scissor lifts 20’ Marklift 19’ Stratolift electric FORK TRUCKS including: Contractors Fork trucks Gehl Dynalift 883, telescopic boom Lull Highlander 844, telescopic boom Fork trucks Hyster 5,000# Hyster, Detroit diesel, 1992, 2 stage mast, 30,000#

MAN LIFTS including: Boom Lifts 4 JLG 40’ & 60’, 4 wheel drive, diesel

Caterpillar, 1992, 2 stage mast, 20,000# Caterpillar, 4 stage mast, 16,000# Hyster, 2003, 4 stage mast, 6,000# Hyster, 4 stage mast, 4,400# Yale, 2 stage mast, 3,000# Nissan 80, 4 stage mast

Excavators Kobelco SK 150 Komatsu PC10 Yanmar B3U, just reconditioned Loader Michigan- 275A Series II, 3 yard bucket

WELDERS Lincoln, Miller, Hobart- on trailer, diesel operated 400 to 600 amps

TRAILERS including: Landall 50 ton, 3-axle detachable low boy 53’ Fruehauf enclosed 49’ Trailer King drop deck Covered wagon Military trailer 2005 Emerson Rhino dump, 6’10”x14’, dual axle 20’ tilt dump, 20 ton Tandem dump trailer Enclosed 15’ dual axle Utility & landscape trailers

EARTH MOVERS Bulldozers John Deere 650GTC & 650HLT Komatsu D21P Less than 100 hrs on new undercarriages!

HARTLAND MACHINERY AUCTIONEERS PO Box 209, Portersville, PA. 16051 724-368-9788 ~ 724-368-9839 fax info@hartlandmachinery.com PA Lic.# AU-002918-L / AY-000190-L

Now Accepting Consignments for the June 2, 2012 Heavy Equipment, Sport & Recreational Auction! FEATURING : Dozers, Loaders, Excavators, Backhoes, Logging, Trucks, Trailers, Automobiles, Construction Related Items, RVs, Campers, Boats, ATVs, Motorcycles and Snowmobiles There is no fee for advertising! The more time we have to promote your equipment, the bigger the return at auction time!

Accepting consignments until Saturday, May 26 Office: 763-389-2700 Email: info@waynepikeauction.com Located on Hwy 169, 1 Mile North of Hwy 95 in Princeton, MN

Online Bidding: www.waynepikeauction.com

SALES STAFF: Mitchell Siemers: 320-267-1799 Don Wangen: 763-360-5272 Steve Blitvich: 320-250-4540 Jeremy Lange: 763-647-9674

MISCELLANEOUS including: Knapheide Kuv van utility bed Ingersol diesel portable air compressor Joy air compressor 250 gallon+/- diesel fuel tank Gang boxes, power tools, hand tools, chains & lifting devices, 3 in 1 scale

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 87

COMPLETE LIQUIDATION

SECURED PARTY AUCTION

JOBA CONSTRUCTION

ONE OWNER TRUCK TRACTORS (MICHIGAN SPECIALS), DUMP TRAILERS, GRAVEL TRAINS.

CONSTRUCTION & SUPPORT EQUIPMENT, TRUCKS & TRAILERS

AUCTION

DETROIT,

AUCTION

DETROIT, (LAPEER) MICHIGAN

(ROMULUS) MICHIGAN

NOTE: The following trucks & trailers will

NOTE: After 50 years in the construction industry, the corporate decision has been made to liquidate the assets of this company.

be selling for several secured creditors.

EARLY HILITES INCLUDE: CRAWLER CRANE: Northwest 50D 50T, 10 HYDRAULIC EXCAVA-

TORS: Cat 312CLC, Cat E70B, JD 690ELC, Koehring 1066D, Koehring 6644, Kobelco 905LC-11, Kobelco 130LCIV, Daewoo 280, Komatsu PC60, Insley H1000, 7 RUBBER TIRED LOADERS: (3) JD 644G, Case 821B, Case W30 (parts), Case W18, Michigan 275B, 3 CRAWLER TRACTORS: Case 850G, Case 850C, Dresser TD12, 2 TRACTOR LOADER BACKOES: Case 580 L (4x4), Case 580 Super K (4x4), VIBRATORY ROLLERS: Case 602B, 3 SKID STEERS: (2) Bobcat 843, NH L555, AIR COMPRESSOR: Chicago Pneumatic, TRENCHER: Ditch Witch R65, BORING MACHINE: Michael Byron Mfg. D24-300, WELDERS: Miller 225, ARROW BOARD, 6 PUMPS: (6) Gorman Rupp 3in., SWEEPER: Elgin, DIGGER DERRICK TRUCK: 1983 Chevy C70, AUGER TRUCK: 1989 Ford L8000 (s/a), DUMP TRUCK: 1992 Ford L9000 (t/a), 6 TRUCK TRACTORS: (2) 2000 Freightliner FLT Century (t/a), 1993 Mack CL753 (t/a), 1993 Autocar (tri.), 1992-1991 Autocar (t/a), 2 PICKUPS: 1995 Chevy Silverado X-Cab 1/2T, 1994 Dodge Ram 1500 ½ T, DETACHABLE GOOSENECK TRAILER: 1996 Talbert 50T 24ft. (tri.), TAGALONG TRAILER: 1986 18ft. (tri.), 2 FLATBED TRAILERS: 2002 Transcraft 48ft. (t/a), 2000 Dorsey 50ft. 6 axle, ROLLOFF TRAILER:1995 Monon (t/a), 2 OFFICE/ STORAGE TRAILERS: (2) 20ft., 4 DUMP TRAILERS: Fruehauf 30ft. (6 axle), Fruehauf Steel (5 axle), Fruehauf Parts Unit 30ft. Steel Box (5 axle), 1995 Hardbox AR-450 30ft. (5 axle), VAN TRAILER: 1998 Trailmobile 24ft., ENGINES: 892 Detroit Diesel w/ 15 spd. Trans., 855 Cummings Big Cam Diesel w/ 13 spd. Trans., CRANE ACCESSORIES/ SUPPLIES: (10) Misc. Hydr. Crane/ Tackle Blocks, (2) Wrecking Balls, Beam Driving Needle, Large Qty. S Type Pile Sheeting & Steel Eye Beams, (3) Hydr. Crane Clam Buckets, Linkbelt 312 Pile Driver, CRANE TIRES: (8) GoodYear 29.5X29 w/ rims, ATTACHMENTS: Excavators: Cat 36in. ditching Bucket, Kobelco 130 20in. Ditching Bucket, JD 690C 24in. Ditching Bucket, Kobelco 905 20in. Ditching Bucket, Koehring Insley 1066 36in. Ditching Bucket, Headshacker 36in. Trench Compactor, Hammer, Skid Steers: Bobcat 60in. Grapple Bucket, Bobcat Auger NH 63in. Bucket for L series, Bobcat 60in. Vib. Smooth Drum Roller, New 60in. -78in. Smooth- Stump- Rock -Snow & Mulch Buckets, New Mount Plates, New Versatech Grapple Buckets, New Versatech Hay Spears, New Pallet Forks, New Fork Frames, New X36 Thumbs, Backhoes: (4) Case 24in. Ditching Buckets, (2) Case 18in. Ditching Buckets, Case 12in. Ditching Bucket, SURVEY EQUIPMENT: (2) Tripods, (2) Lasers, SUPPORT EQUIPMENT: New Easy Kleen Magnum 4000 Pressure Washer, 4in. –36in. Water Main Pipe, 1,000gal. Steel Water Tank, Chicago Pneumatic (3) 90lb.- (6) 60lb. Jack Hammers, (2) Wacker 30in. Plate Compactors, (2) Air Testers, 220v Electric Air Compressor, Water test Pump, (2) Stone Boxes, (25) Misc. Steel Road Plates, (2) Fuel Tanks, Chain Link Fence, Demo Plate Compactors, Demo Power Trowels, Demo Edco Vacuums, Demo Edco Walk Behind Saws, Demo Edco Scarifier, Demo Edco Masonry Saw, New Abrasive & Diamond Blades, New Stiff neck Pintle Hitches, New Air Spray Guns, New Ratchet Cargo Straps, New Impact Wrenches, Air Spray Guns, New Huskie Hammer Drill, New Jack hammer Hose, New Impact Wrenches, New Water Hose, Pintle Hitches, Ratchet Straps, Diamond Blades, Submersible Pumps, Concrete Vibrator, Impact Wrenches, Water Hoses, Air Spray Gun Kit, Water Pump, Mustang Rammer, Jack Hammer Air Hose, Hammer Drill, Hose Reels, Scaffolding, Porta Powers, Straps, New Smartquip Plate Compactor, New Mustang Submersible Pumps, New Diamond Blades, Ratchet Straps, MBW Plate Compactors, Multiquip Plate Compactors, New Mustang CV3500 Concrete Vibrator, 2 gal. Rockworth Air Compressor, Paint Tank, Multiquip Power Trowels, Multiquip Rammer, Ryan Sod Cutter, Air Compressors, Tile Saws, Concrete Saws.

Address: 18111 Telegraph Road, Romulus, MI 48174. DIRECTIONS: From Detroit Metro Airport: Southwest on W G Rogell Dr. toward International Dr. 1.4 miles, take ramp to Goddard Rd., right on Goddard Rd. .6 miles, continue onto Wick Rd. 3 miles. Right on US-24S/ Telegraph Rd. 4.6 miles. Site on left. From Detroit: I-75 S toward Toledo 16 miles, take exit 34B for Sibley Rd. .3 miles, right on Sibley Rd. 1.1 miles, right on US-24N/ Telegraph Rd. .5 miles. Site on right. From Toledo: I-75 N 39.5 miles, exit 32-32A-32B for W Rd. toward Woodhaven/ Brownstown Township/Trenton, exit 32B on left for W Rd. W toward Woodhaven/ Brownstown Township/ I-75 S .6 miles. Merge onto West Rd. 1.3 miles, right on US-24 N/ Telegraph Rd. 2.5 miles. Site on right.

SALE SITE PHONE: (248) 388-0918

TUES., JUNE 5 @ 10:00 AM

EARLY HILITES INCLUDE: 13 TRUCK TRACTORS 2008-(4) 2006(8) 2005Peterbilt 367 Michigan Special Sleeper (t/a), 6 GRAVEL TRAINS: (2) 2001 East 4 axle AR1 Steel Lead w/ 4 axle Pup, (2) 1997-1996 East 4 axle aluminum w/ 4 axle Pup, 1987 Fruehauf3 axle aluminum w/ 5 axle pup, DUMP TRAILER: 1995 Dorsey 28ft. Aluminum (tri.), DETACHABLE GOOSENECK TRAILER: Talbert 50T 3 axle, FLOW BOY TRAILER: 1999 Red River 8 axle w/ walking floor-tarp-3 lift axles, TRACTOR LOADER BACKHOE: JCB 214S (4x4), SUV: Saturn Vue, SUPPORT EQUIPMENT: Demo Plate Compactors, Demo Power Trowels, Demo Edco Vacuums, Demo Edco Walk Behind Saws, Demo Edco Scarifier, Demo Edco Masonry Saw, New Abrasive & Diamond Blades, New Stiff neck Pintle Hitches, New Air Spray Guns, New Ratchet Cargo Straps, New Impact Wrenches, Air Spray Guns, New Huskie Hammer Drill, New Jack hammer Hose, New Impact Wrenches, New Water Hose, Pintle Hitches, Ratchet Straps, Diamond Blades, Submersible Pumps, Concrete Vibrator, Impact Wrenches, Water Hoses, Air Spray Gun Kit, Water Pump, Mustang Rammer, Jack Hammer Air Hose, Hammer Drill, Hose Reels, Scaffolding, Porta Powers, Straps, New Smartquip Plate Compactor, New Mustang Submersible Pumps, New Diamond Blades, Ratchet Straps, MBW Plate Compactors, Multiquip Plate Compactors, New Mustang CV3500 Concrete Vibrator, 2 gal. Rockworth Air Compressor, Paint Tank, Multiquip Power Trowels, Multiquip Rammer, Ryan Sod Cutter, Air Compressors, Tile Saws, Concrete Saws.

Address: 190 West Newark Rd., Lapeer, MI 48446. DIRECTIONS: From Bishop International Airport: Southbound on I-75 or US-23: Take Bristol Road exit 116B. Proceed through the light approximately 1/2 mile to the terminal entrance on left. Northbound on I-75 or US-23: Take Bristol Road exit 116, bear left, turn left at the light (Bristol Road). Proceed approximately 1/2 mile to terminal entrance on your left. Entrance to Site: East Side of M-24 (Lapeer Rd.)

SALE SITE PHONE: (248) 388-0918

WED., JUNE 6 @ 5:00 PM

ALEX

LYON & SON Sales Managers & Auctioneers, Inc.

www.lyonauction.com corporate offices: Bridgeport, NY Phone: (315) 633-2944 • Fax: (315) 633-5635 www.lyonauctionlive.com

Page 88 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ritchie Bros. Auctioneers Closes Deal to Acquire AssetNation Ritchie Bros. Auctioneers has acquired AssetNation Inc., a leading online marketplace and solutions provider for surplus and salvage assets. Ritchie Bros. intends to continue to grow AssetNation’s core business as well as to leverage its e-commerce expertise and technology platform to develop and launch unique new services for equipment owners whose buying and selling preferences may not be met by the company’s live unreserved auctions. AssetNation uses its technology platform, strong management and employee team, deep e-commerce expertise and family of global online marketplaces to support buyers and sellers of surplus and salvage assets. AssetNation is active in a number of industry verticals including energy, fleet and distribution, insurance and government. AssetNation is a privately-held company headquartered in Houston, Texas, with offices in Pittsburgh, Pa., Mexico City, Mex., and London, UK. “We are very excited to be welcoming AssetNation into the Ritchie Bros. family. Our values are aligned and we share the same passion for bringing fairness and transparency to the equipment market,” said Ritchie Bros. Chief Executive Officer Peter Blake. “Our success in building the world’s

largest equipment auction company through our flagship unreserved auctions has given us a unique understanding of the world’s equipment owners. We intend to leverage this market knowledge and the power of our brand not only to fuel the growth of AssetNation’s business, but also to develop additional solutions that will expand our addressable market and help us meet the diverse and evolving preferences of a segment of the equipment market that we have not traditionally reached with our unreserved auctions.” The new solutions Ritchie Bros. plans to develop, along with other capabilities the company will add with partners, will be unique in the equipment industry, according to the company. They will expand the Ritchie Bros. service offering and provide a transparent and efficient way for the nonauction segment of the market to buy and sell equipment. The new services will not be auction services and will align with the company’s mission to create compelling business solutions that enable the world’s builders to easily and confidently exchange equipment. “We believe that adding AssetNation’s best-in-class technology and deep e-commerce expertise and leveraging those

strengths to develop exciting new services will allow us to build on our position as the world’s largest seller of used heavy equipment and trucks and to attract new customers,” added Blake. “We believe this initiative will increase shareholder value by enabling us to create compelling complementary solutions and effectively double our addressable market. “We are fortunate to have a growing and profitable core business and we remain firmly committed to it — we see many years of strong growth in front of us for our flagship unreserved auctions. In fact, almost the entire 1,300 employee Ritchie Bros. team will remain focused on the growth of our core business. “In addition to facilitating the development and launch of our new services, the acquisition is also expected to generate growth for our core unreserved auction business,” said Blake. “Many of AssetNation’s customer relationships exist in industry verticals that are complementary to Ritchie Bros.’ core business, particularly in the energy, fleet and distribution, insurance and government sectors. We believe that a combined service offering will satisfy the needs of these customers more effectively.” Blake and AssetNation Chief Executive

Officer Dave Dawson said the transaction is good not only for customers, but also for employees of both companies. Blake added that he has been very impressed by the quality and depth of the AssetNation team and is looking forward to welcoming all of them to the Ritchie Bros. team. “The acquisition is a validation of AssetNation’s efforts to bring fairness and integrity to the surplus and salvage asset markets and makes good business sense. We have invested over 10 years in developing a robust technology platform for online marketplaces and as part of the Ritchie Bros. team, we will develop and launch exciting new buying and selling solutions for equipment owners in the non-auction segment. In addition, the strength of the Ritchie Bros. brand will enhance the growth of our existing online marketplaces,” Dawson said. Ritchie Bros. has agreed to acquire 100 percent of the issued and outstanding shares of AssetNation in an all cash deal valued at approximately $64 million. The transaction closed on May 15, 2012. AssetNation was purchased from the controlling shareholder Spire Capital Partners, a New York-based private equity firm. For more information, visit www.rbauction.com.

Altec Capital Implements New Lack of Enclosure Spurs Debate Technology for Leasing Process WTC from page 1

Altec Capital, a nationwide funding source for the electric utility, telecommunications, contractor and tree care markets, has implemented new technology to make it easier for customers to get the financial solutions they need. “We’re dedicated to meeting the needs of our customer,” said Greg Wheeler, sales manager of Altec Capital. “New technology initiatives make the leasing process quicker and easier.” The first of two technology initiatives at Altec Capital is vision commerce. This system provides customers with up-to-date information about their leases and a secure login to view their lease and asset information. It also is able to run standardized reports, obtain historical invoices and documents, and even enter data into the system to begin the leasing process. In conjunction with vision commerce, Altec Capital is providing an electronic signature platform, which will give customers an easy and secure method of signing and

receiving lease documents. E-sign provides customers with the ability to login to a secure Web site to view and electronically sign lease documents, add notes or corrections, and print copies for record-keeping. More benefits include: • Increased security by reducing the number of times documents are handled. • Cost reduction in sending and receiving lease documents. • The ability to view and track the status of multiple leases. • Quicker receipts and confirmations for each step of the process. Both vision commerce and e-signature are examples of Altec Capital’s commitment to helping reduce life-cycle cost, improve cash flow and transfer ownership risks by providing cost-effective financial solutions for hydraulic equipment needs and other equipment that make its customers successful. For more information, call 888/408-8148 or visit www.alteccapital.com.

crown of tallest building in the United States at 1,451 ft. (442 m), not including its own antennas. The skyscraper recently became New York City’s tallest building as workers erected steel columns that were just high enough to rise above the Empire State Building’s observation deck. The building is being constructed to replace the twin towers destroyed in the Sept. 11, 2001, terror attacks. In order to repair or replace a broken panel on the needle’s proposed enclosure, a climber would have to scale the spire, attach a cable to the top, lower the cable about 2,000 ft. (610 m) down, and then use it to hoist a 2,000-lb. (907-km) piece of fiberglass back to the top, said Jordan Barowitz, a spokesman of Douglas Durst, the building’s developer. “This is the stuff of ‘Mission Impossible,’ not skyscraper construction,” Barowitz said. The tower’s architects at Skidmore Owings & Merrill LLP did not immediately respond to a request for comment May 10. Designs call for the tower’s roof to stand at 1,368 ft. (416.97 m) — the same height as the north tower of the original World Trade Center. With the needle, the building’s total height will be a symbolic 1,776 ft. (541 m), referring to America’s founding in 1776.

Experts and architects have long disagreed about how to measure the height of skyscrapers that have masts, spires and antennas that stretch into the sky. The Council on Tall Buildings and Urban Habitat, a Chicago-based organization considered an authority on such records, said antennas do not count when determining building height. An antenna, the group said, is something simply added to the top of a tower that can be removed. By contrast, a spire is something that is part of the building’s architectural design. The council has not yet decided how the needle’s lack of an enclosure will affect its status as either an antenna or a spire, though it will, indeed, function as a broadcast antenna. On its Web site, the Port Authority of New York and New Jersey describes the needle as an antenna. “The short answer is we don’t know yet,” said Kevin Brass, a spokesman of the council. “There is no doubt that this change will raise questions about the height.” The council’s committee on building height will ultimately have to sit down with updated drawings from the architects and developers and make a final determination, Brass said.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 89

One-Owner Auction Thursday, June 7 Featuring equipment from

2005 FORD F-550 T/A SERVICE TRUCK

INGERSOLL-RAND ECM370 CRAWLER DRILL

2004 GEHL DL12H-40 TELESCOPIC BOOM LIFT

2000 INTERNATIONAL 9200I T/A TRUCK TRACTOR

PETERBILT 379 TRI/A TRUCK TRACTOR W/ KALYN SIEBERT 70 TON LOWBOY TRAILER

1999 GEHL DL10-55H TELESCOPIC BOOM LIFT

1998 GMC 7500 S/A WATER TRUCK

LINK BELT HC248H HYDRAULIC TRUCK CRANE

PETTIBONE 204-G TELEHANDLER

LINK BELT LS218H CRAWLER CRANE

Visit www.ironplanet.com to see the complete list of equipment, review the guaranteed inspection reports, and place your bids.

Inspected and Guaranteed www.ironplanet.com s 888-433-5426 California Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change. Copyright © 1999-2012 IronPlanet, Inc. All Rights Reserved. IronPlanet ®, IronClad Assurance ® and Auctions you can trust ® are registered service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.

Page 90 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

K-Series Backhoe/Tractor Loaders Offer Versatility, Power John Deere’s K-Series backhoe loaders — 310K EP, 310K, 310SK, 310SK TC, 315SK, 410K, 410K TC, 710K — build on the success of the J-Series. Two economical tractor loader models (210K EP, 210K) round out the K-Series and provide additional job site versatility. The new K-Series models deliver productivity, uptime and lower daily operating costs that operators expect from John Deere equipment, according to the company. “Our customers are a diverse group that use backhoe loaders and tractor loaders for a variety of applications on the job site,” said Louann Hausner, product marketing manager of backhoe loaders, John Deere Construction & Forestry. “The new K-Series provides North American contractors a variety of options that are powerful, versatile, productive and economical. John Deere is committed to matching the right machine to the right customer.” The new K-Series meets today’s emission regulations. Powered by a certified IT4/ Stage III B John Deere PowerTech engine, the K-Series comes equipped with a five-speed transmission that allows top speeds of 25 mph (40 km) when roading. An optional AutoShift transmission enables smooth shifting and improves operator comfort by reducing the number of times the Transmission Control Lever (TCL) needs to be actuated during operation. A single loader lever with integrated electro-hydraulic (EH) auxiliary loader control eliminates the need for a second lever when using a multiThe 310K EP, 310K, 310SK, 310SK TC, purpose bucket. In addition, a complete 315SK, 410K, 410K TC, 710K build on the success of the J-Series. redesign of the cab ventilation now circulates cab air from front-to-back, directing airflow where operators need it the most. cylinders and tilt steering and are ideal for Enhancements also were made to John paving and grading applications. With strong Deere’s total machine control (TMC) backvisibility, ride control, limited slip front axles hoes. Updates include a joystick redesign and a single lever for controlling a loader that gives operators even easier operation with auxiliary hydraulics, this tractor also is with equal lever efforts in all directions for ideal for loading. smooth and productive operation as well as The new K-Series offers several customer improved swing control that allows for more favored features that carried forward from precise trench work with less backhoe wag. the J-Series. These include a multi-plate The K-Series includes many key features clutch engagement that allows for on-the-fly that increase machine uptime such as mechanical front wheel driver (MFWD) improved engine access and a cooling packengagement; proven PowerShift transmisage design that allows each of the coolers to sion; deluxe lighting package that includes be separated for easy cleaning. To protect the 10 adjustable work lights that enables cusmachine on the job site, backhoe loaders tomers to work longer and safely before sunwith a sealed switch model (SSM) come rise and sunset; multi-language digital monstandard with machine security. Differential itor for on-board diagnostics, calibrations lock protection can easily be enabled through and machine information; and same side, the monitor and prevents potential damage from the rear differential lock being engaged Powered by a certified IT4/ Stage III B John Deere PowerTech engine, the K-Series ground level daily service for easy maintecomes equipped with a five-speed transmission that allows top speeds of 25 mph nance checks. at too high of speeds. For those fleet managers, owners or operIn an effort to lower daily operating costs, (40 km) when roading. ators looking to get the most out of their John Deere is providing smart technology with auto idle, auto shutdown and keyless start. These three specifically for rental and large contractor customers that equipment, a standard three-year subscription of JDLink features come standard on all machines equipped with SSM. need reliable, easy to use power. The EP models provide a 70 continuously collects and transmits machine data for In addition, an economy mode setting provides a sweet spot hp (52 kW) engine with IT4 power without needing any machine management. The system enables timely prevenfor maximum productivity and optimal fuel savings. An aftertreatment technology. This eliminates the need for addi- tive maintenance and remote diagnostics, as well as the coorelectronically controlled, variable-speed cooling fan, con- tional operator training or extra monitoring of machines that dination of machines working on multiple job sites to get the trolled by an electronic clutch will reduce horsepower draw have numerous operators focused primarily on quickly get- right machine to the right place at the right time. John Deere provides its customer with the tools to optimize their entire on the engine for quieter operation and improved fuel econ- ting on and off a machine to get a job done. In addition to the backhoe loaders, the 210K EP and 210K operation. omy. For more information, visit www.JohnDeere.com. The 210K EP and 310K EP are two new models designed tractor loaders deliver best-in-class seat rotation, dual-tilt rear

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ May 26, 2012 â&#x20AC;˘ Page 91

MYRON BOWLING Job Completion

2ĂĽ ĂĽ$ %.4%202)3%ĂĽ #/.42!#4/23 ĂĽ3UNSETĂĽ0KĂĽINĂĽ#HAMBERSBURG ĂĽ0!ĂĽ

FRIDAY, JUNE 15th at 10AM Inspection day before from 9AM to 4PM

Accepting Excavators, Dozers, Loaders, Semis, Trucks, Trailers and Related Equipment! '94 JD 590D Meter Reads Approx 6,000 Hrs 1 1/2 Yd Clay Bucket Heated Cab, A/C Bucket Pins Gone Through Last Year

6 * *

Jct MN Hwy 95 & 25 Foley, MN

Accepting Consignments Until Noon on Saturday, June 2nd, 2012 For a complete list of our upcoming auctions visit www.iraymn.com

3 H*))I H%$,I +(*E)$%, or Email iray@iraymn.com

Col. Raymond S. Henry - WI Lic. # 2490-52; MN Lic. # 05-12-11 Real Estate Auctioneer & GPPA Certified Equipment Appraiser

itâ&#x20AC;&#x2122;s not â&#x20AC;&#x2122;s fault

by TheShelterPetProject.org

C A S E C X 1 6 0 B K Q & 2 0 0 7 C AT E R P I L L A R 3 1 8 Excavators p CATERPILLAR 304C Mini Excavators p CATERPILLAR 953 & 963 Track Loaders p FORD " JOHN DEERE 3' CATERPILLAR 420D Backhoe Loaders p JOHN DEERE 570 Motor Grader p CATERPILLAR 279C 3KID 3TEER ,OADERS p HYSTER & CATERPILLAR Rollers-As .EW !S p Dump Trucks !S .EW !S WESTERN STAR, FORD, MACK, INTERNATIONAL p 4RAILERS p 0ICKUP 4RUCKS !S . EW ! S p AT L A S C O P C O A i r C o m p r e s s o rs p 'ENERATORS p !SSORTED 3AWS p Construction Equipment "REAKERS 6IBRAPLATES 4AMPERS 7ATER 0UMPS -ORE TERMS: #ASH COMPANY CHECK OR WIRE TRANSFER "UYER S 0REMIUM /NSITE /NLINE 4O BID ONLINE REGISTER ONLINE AT www.bidspotter.com. 0ENNSYLVANIA !UCTION ,ICENSE .UMBERS

-YRON # "OWLING !5 2 p -YRON "OWLING !UCTIONEERS )NC !9 , ,ANCE -ANNION !5 2

Visit www.myronbowling.com for details.

-YRONĂĽ"OWLING !UCTIONEERSĂĽ)NC

0 / ĂĽ"OXĂĽ ĂĽsĂĽ2OSS ĂĽ/(ĂĽ

ĂĽ

WWW MYRONBOWLING COM

Page 92 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Two Oil Field Auctions Ken Allen Trucking, LLC

Arrow Drilling Services, LLC

Thursday, June 21, 2012 • 10:00 AM COMPLETE LIQUIDATION 8384 US 131 S, NE • Kalkaska (Mancelona), MI 49659

Friday, June 22, 2012 • 10:00 AM 4030 Columbus Drive Kalkaska, MI 49659

Winch Trucks: 2004 KENWORTH T800, C15 475 Caterpillar Engine, 13 Speed Transmission, 5th Wheel, Tandem Axle, Full Lockers, Air Ride, 16,000# Front Axle, 46,000# Rear Axles, Braden Winch, Full Tail Roller with Steel Fenders, Oilfield Front Bumper, Wet Kit, 11R22.5 Rear Tires, 385/65R22.5 Front Tires • 1998 KENWORTH T800 TRI-AXLE, N14 Cummins Diesel Engine, 10 Speed Transmission w/2 Speed Auxiliary, 52,000# Rear Axles, 18,000# Front Axle, Spring Ride, Double Frame, Tulsa 80 Mechanical Winch w/Power Tower, Oil Field Front Bumper, Full Steel Fenders w/Narrow Tailroller • 1998 KENWORTH T800, 3406 Caterpillar Diesel Engine, Tandem Axle, 15 Speed Transmission, 46,000# Rear Axles, 14,000# Front Axle, Air Ride Suspension, Tulsa 60 Mechanical Winch, Heavy Duty Oil Field Bed & Bumper, Full Tailroller • 1990 KENWORTH T800, 400 BC Rebuilt Cummins Diesel Engine, 15 Speed Transmission, 40,000# Rear Axles, 12,350# Front Axle, Walking Beam Spring Suspension, Double Frame, Tulsa 70 Hydraulic Winch, 36” Tailroller, Wet Kit, Full Steel Fenders, HD Front Bumper, 11R24.5 Tires • 1989 PETERBILT 379, 3406 Caterpillar Diesel Engine, 13 Speed Transmission, Tandem Axle, 44,000# Rear Axles, 12,000# Front Axle, Air Ride, Tulsa 64 Mechanical Winch, Secondary Winch w/Poles, Oil Field Bed & Bumper, Full Tailroller • 1988 PETERBILT 379, 350 Big Cam Cummins Diesel Engine, 13 Speed Transmission, 38,000# Rear Axles, 12,000# Front Axle, Air Suspension, Oil Field Body w/Tailroller, Braden Mechanical 50 Ton Winch w/Hydraulic Drive, Wet Kit, 96” Tailroller, 11R22.5 Tires Rig-Up Tandem Bed Trucks: OSHKOSH 6x6 30 TON, 350 Big Cam Cummins Diesel Engine, 9 Speed Transmission w/3 Speed Auxiliary, Power Tower, 46,000# Rear Axles, 20,000# Front Axle, 1st Winch – Braden MS50 (Rebuilt), 2nd Winch – Tulsa 64, 3rd Winch – 20,000 Lb., 380” Wheel Base, 27’ Poles, 10 ¾" Full Tailroller, HD 315/70R22.5 Drive Tires • 1977 KENWORTH C500, 400 Big Cam Cummins Diesel Engine, Tandem Axle, 6x4 w/Power Tower, 65,000# Rear Axles, 20,000# Front Axle, Double Frame, 1st Winch – Braden MS50, 2nd Winch – Tulsa 64, 340” Wheelbase, Tall Bed, 25’ Poles, Full 10 ¾" Tailroller • 1981 MACK RD-SX, 300 Mack Diesel Engine, Tandem Axle, 2 Stick 4x5 Updated Transmission w/Power Tower, 58,000# Rear Axle, 20,000# Front Axle, 1st Winch – Braden MS50, 2nd Winch – Braden MS30, 3rd Winch – Braden 30,000#, New 21’ Poles, Full 10 ¾ “ Tailroller Boom Trucks: 1996 KENWORTH T800 w/National 18 Ton Boom • 1989 INTERNATIONAL 9400 w/JLG 1500 BT Boom Oilfield Trailers: 1986 TALBERT • LOADCRAFT Road/Haul Trucks: 1999 KENWORTH T800B, Tri-Axle, Michigan Special • 1998 KENWORTH

BusinessCalendar

THREE DRILLING RIGS Drilling Rig 1001: IDECO H-35 RAMBLER RIG, S/N RR714, 300HP, On 4 Axle Self-Propelled Carrier • IDECO H-35 DOUBLE DRUM DRAWWORKS, w/Parmac Double 15' Hydromatic Brake, Foster Makeup & Breakout Catheads-Braden Hydraulic Tugger WinchPowered by Detroit 8V71N Diesel Engines w/Allison Automatic Transmission • IDECO KM MAST, 95-212 95 Feet, 212,000# On 6 Lines, 3 1/2 Standpipe w/3"x45' Kelly Hose • TRAVELLING IDECO T800 • 1996 KENWORTH W900L • 1990 PETERBILT 379 • 1988 UTD, 110 Ton Unitized Block-Hook w/(3) 30" Sheaves 1" line, 72"x1 PETERBILT 379 Lowboy Trailers: 2006 ASSEMBLED HEAVY HAUL 3/4" 300 Ton Weldless Bails • IDECO SR 175 ROTARY TABLE, 17 65 TON • LOADMASTER JOE-DOG • 1997 TALBERT DOUBLE DROP 1/2" Opening w/Split Master Bushing, Ideco TL 120 Ton Swivel, 4 1/4"x40' Square Kelly, Varco (4) Roller Drive Bushing TIW Upper 35 TON • 1995 FONTAINE DOUBLE DROP 50 TON • 70 TON 5 AXLE Kelly Valve, TIW Upper Kelly Valve • CUSTOM 200 TON INTEGRALPROJECT TRAILER Stepdeck Trailers: 2006 WILSON • 1996 AZTEC LY LOADS SUBSTRUCTURE w/16'x18' Floor Space, 13' KB • 1994 TRAILMOBILE Hi-Flat Trailers: 2006 WILSON CF900 • 2005 Measurement w/10' 6" Clear Height Under CHEETAH • 1994 STOUGHTON • 1993 Rotary Table (Unitized & Wheel Mounted TRANSCRAFT • 1993 TRANSCRAFT • 1990 Substructure & Walk Section, Including DORSEY • 1995 TRANSCRAFT • 1988 Hydraulic Pipe Handling Accessories) • TRANSCRAFT • 1982 LUFKIN Float Trailers: IDECO 550 HP PUMP, Series 60 Detroit 1980 LUFKIN • 1977 DICKERSON Diesel Engines, 15" Stroke • IDECO 550 Pickups/Hotshot Trucks: 2009 FORD F350 HP PUMP, Incomplete • WILSON 600 HP KING RANCH • 2008 FORD F350 LARIAT • For More Information PUMP, CAT Engine • (2) 180 BARREL 2008 FORD F350 LARIAT • 2004 DODGE Call 1-800-433-6670 or CAPACITY STEEL MUD PITS, By-Pass 3500 LARAMIE • 2004 CHEVROLET 2500 • Visit www.dunkleauctioneers.com Troughing, Top Mounted Walkway w/Safety 2003 FORD F350 LARIAT LTE • 2002 FORD Email: info@dunkleauctioneers.com Railings, Lighting, Harrisburg 10" Single F350 LARIAT • 2001 FORD F350 XL • 1999 Cone DeSander • WELL CONTROL Darell Dunkle 989-429-5336 FORD F250 • 1995 FORD F350 • 1995 GMC EQUIPMENT, REGAN 11" 3000 # ANNUGreg Zuiderveen 231-846-1201 TOPKICK Gooseneck/Tag Trailers: (2) 2009 LAR TYPE BOP; SCHAFFER 11" 5000# PJ GOOSENECK • (2) 2008 PJ GOOSEBOP, LTX 5000 Double Ram; 80 GALLON NECK • 2003 HAULRITE GOOSENECK • (2) ACCUMULATOR, (4) Stations, (1) 5 HP 2009 PJ DECKOVER • 8x18 CAR HAULER • Electric Charge Pump, Air Pump • GEN8x16 MORITZ CAR HAULER • TUBING ERATOR ACCUMULATOR, FUEL TRAILTRAILER Utility Vehicle/4 Wheeler: KUBOER, 3000 Gallon Diesel Tank, 130KW TA RTV 1100 • (2) 2005 POLARIS SPORTSCummings 855 w/Power Panel, Oil Bins & MAN MV7 Rubber Tire Loader: CATERPILSpare Parts Storage • 80'x40' VAN DOGLAR IT18B Winch Tractors: (2) CASE 1450B HOUSE/CHANGE ROOM, Equipped Forklift: CATERPILLAR DP50K Pressure w/Tool Room, Knowledge Box Record-OWashers: (2) ALCO-DUKE 3500-5-ISC Graph, Drilling Recorder 2 Pen, Crew STEAM PRESSURE WASHER, Mounted On Change Room & Lockers • 500 BBL SINTandem Axle Trailer • ALKOTA 430x4 STEAM GLE AXLE FRAC TANK WATER STORWASHER Shop Tools & Support Equipment AGE, Divided Into 25 BBL Compartments •

American Subcontractors Association – Midwest Council The American Subcontractors Association (ASA) Midwest Council is a construction trade association made up of quality specialty contractors and suppliers serving the construction industry and the community in the Minnesota Nursery & Landscape Association (MNLA) greater St. Louis metropolitan area and southern Illinois. – Successful Business Grow Here! The ASA Midwest Council’s purpose is to improve the con2012 EVENTS CALENDAR: Wednesday, June 20, 2012 (6:30 PM CST to 9:00 PM struction process through active participation in education, legislation and cooperation. The ASA Midwest CST) – Garden Party Thursday, August 9, 2012 (all Day) – 2012 Wisconsin Council has been named “Chapter of the Year” by the American Subcontractors Association five out of the last Nursery Field Day Thursday, August 16, 2012 (all Day) – Carlin: 2012 seven years. For more information about the ASA Midwest BuyerFest Council, visit www.asamidwest.com or contact Susan Winkelmann at 314-845-0855. ASA Midwest Council – ***Please contact MNLA at mnla@mnla.biz or Voice of the Midwest Subcontractor. telephone toll free: 888-886-6652 for more information. AGC of AMERICA is pleased to offer a wide variety of Georgia Utility Contractors Association, Inc. 2012 2nd Quarter Safety Training Schedule 804 Main Street, Suite C, Forest Park, GA 30297 Phone: 404-362-9995, Toll Free: 877-SAF-GUCA, Web: www.guca.com MAY, 2012 2nd Quarter Safety Training Schedule includes the following topics: . Competent Person Excavation . Confined Space Entry Program . OSHA 10 Hour . Damage Prevention/GUFPA Law/PSC . GDOT Approved Flagging Instructor Course . ISEE Blasting Certification Course . NPDES Level 1A Course and Exam . NPDES Level 1A Recertification Course . NPDES Level 1B Course and Exam . NPDES Level 1B Recertification Course . GDOT Approved Flagging Instructor Course . GDOT Approved Flagging Program Please contact GUCA for more information.

only, the conference and the afternoon workshop, or simply the afternoon workshop with one easy-to-use registration form, available at http://www.agc.org/cs/events/2012_agc_environmental_conference.

HOFFMAN EQUIPMENT, Piscataway, NJ – NCCCO Class Schedule – NCCCO Mobile Crane Certification Dates Available NCCCO Mobile Crane Certification June 25 – 29 Written Exam Prep (must pre-register August 20 - 24 At least 2 weeks prior to class) October 15 – 19 Mobile Crane Practical Exam PracticeCall To Schedule Must Schedule NCCCO Mobile Crane Certification Call To Schedule Practical Exam – Must Schedule For More Information or to Register, Call Nancy DeCarr 800-4-HOFFMAN meetings, events and seminars for construction profes- www.hoffmanequip.com sionals that can help you improve every aspect of your New Jersey Corporate Headquarters Hoffman Equipment business. 300 South Randolphville Road Piscataway, NJ 08854 AGC of MINNESOTA EVENTS: June 7-8, 2012 – Conference . Registration is not open for AGC of America’s first national conference on envi- M&T EXPO 2012 ronmental issues that affect construction professionals, M&T EXPO 2012 – Latin-America’s largest and most being held June 7-8 in Arlington, Virginia. The 2010 important event in the area of equipment for the construcAGC Contractors Environmental Conference will provide tion and mining industries is 17% larger in exhibition area educational sessions, discussions, networking opportu- than the show’s previous edition back in 2009. The trade nities and technology demonstrations with a specific show takes place from focus on how to generate profits, gain efficiencies, save money and manage risks. The first day-and-a-half at the May 29th to June 2nd at the Centro de Exposicoes conference will provide construction professionals with Imigrantes, Sao Paulo – Brazil. information and resources to meet environmental This growth in exhibition area is justified by the success of requirements and remain competitive in the marketplace. the event among equipment manufacturers, the growing AGC also plans to hold a supplementary workshop on interest among a number of the sector’s companies in environmental issues important to federal owners and having more room to exhibit their introductions of equipconstruction contractors on the afternoon of the second ment for construction and mining and, furthermore, to day (same location). You can register for the conference deploy distinctive promotional actions targeting those who

AUXILIARY WOLLEY TYPE "B" ROTARY TONGS, 3 1/2 To 13 3/8 Heads Service Rig: 1978 CARDWELL SERVICE RIG • MODEL KB210 DOUBLE DRUM DRAWWORKS, Lebus Grooved For 1” Drill Line & 9/16” Sand Line • AIR/HYDRAULIC OPERATED CONTROL CONSOLE • 11X7 FIVE STAR DRUM BRAKES • CARDWELL 96’ FOUR LEG MAST, 200,000# Certified, Static Hook Load, Two Stage Hydraulic Raising Rams, Six 36” Crown Block Sheaves, Crown Safety Platform, Ladder, Guylines • MOUNTED ON CARDWELL TANDEM AXLE FRONT/TRI-AXLE REAR CARRIER, Caterpillar 3406B Diesel Engine w/Electric Start, Radiator, Gauges Driving An Allison 4460 Transmission, 12,000# Tulsa Hydraulic Winch • 1978 COOPER MOGUAL42 DOUBLE DRUM DRAW WORKS, S/N 119781, Off Of Wilson Carrier 1979 Failing 2500 Rig: TRAILER MOUNTED w/58' Mast • #1 FLOOR MOTOR 471, S/N 4A205220 • #2 FLOOR MOTOR 471, S/N 41105220 • BREWSTER H50 TRAVELING BLOCK w/Bails • RAMSEY 600/120319 WINCH, S/N 917660 • MARTIN DECKER WEIGHT INDICATOR • ONE PIECE RIG BASE/STRUCTURE w/17 1/2" Howard Turner Rotary Table • COMBINATION DOGHOUSE/2000 GALLON FUEL TANK, Trailer Mounted • GARDNER DENVER FXN 7x14 MUD SYSTEM, 855 Cubic Inch 400HP Cummins Motor; 250 BBL Mud Pit w/Shale Shaker, Desander, & Mud Hopper; 5x6 Centrifugal Pump w/50HP Electric Motor; 5x6 Centrifugal Pump w/7.5 Electric Motor; Mud Agitator; 200 BBL Fresh Water Tank w/Circulation Pump • COMBINATION CATWALK/PIPE TUB w/Beaver Slide 8 PIPE TUBE • SET OF PIPE RACKS • 8" DRILL COLLAR, Zipped • (8) 6" DRILL COLLARS, Zipped • (59) JTs 3 1/2 IF DRILL PIPE • 3 1/2" DRILL PIPE ELEVATORS • 3 1/2" DRILL PIPE SLIPS • 6" DRILL COLLAR SLIPS • 8" DRILL COLLAR SLIPS 8 (2) TYPE C ROTARY TONGS • (8) 6" LIFT SUBS • 8" LIFT SUB • 75 TON SKY TOP BREWSTER 3S SWIVEL • 35' 4 1/2" SQUARE KELLY w/Kelly Drive Bushings • TYEP C DRILL COLLAR CLAMP • 671 DETROIT DIESEL 100KW GENERATOR, S/N 12A5799LC • GEOLOGRAPH DRILLING RECORDER Trailers: 1992 FRUEHAUF 300 BBL TANKER • 1999 DICKERSON FLOAT TRAILER • 1991 DORSEY FLOAT TRAILER • 1991 DORSEY FLOAT TRAILER • 1991 DORSEY FLOAT TRAILER • 1984 ROADMASTER FLOAT TRAILER • 1982 LOAD KING FLOAT TRAILER • 1980 LUFKIN FLOAT TRAILER • 1987 SHOPBUILT TANK HAULER Truck Tractors: 1998 MACK CL700 WINCH TRUCK • 1998 MACK CL700, Michigan Special Drill Pipe and Drill Collars: 9 5/8" CASING • 7" DRILL COLLARS • 2 7/8" TUBING Support Equipment

visit the show. Among the outstanding attractions promoted by exhibitors are live demonstrations of equipment in the outdoor area of M&T Expo 2012. These promotional initiatives serve as an important marketing tool for brands since they are expected to attract a significant number of visitors who are interested in accompanying these kinds of attractions. For additional information, please visit the official website: www.mtexpo.com.br. APWA (American Public Works Association) – Register Now for the ’12 Sustainability in Public Works Conference in Pittsburgh, PA June 25 to 27, 2012 – The Fourth Annual APWA Sustainability in Public Works Conference will explore the latest and most innovative tools, practices and case studies in public works. The demands for economic, social and environmental responsibility are increasing daily. This conference gets you access to the resources and experts you need to take sustainability to the next level in your community. You’ll also have an opportunity to see a city that has undergone one of the most impressive sustainable transformations in the entire U.S.! Don’t get left behind! SIGN UP TODAY! Questions? Please contact: Diana Forbes, APWA Meeting Planner & Exhibit Sales Manager, Phone: 816-595-5242 Email: dforbes@apwa.net

2012 FLORIDA Contractor Associations Meetings Postings: 2012 Annual Asphalt Contractors Association of Florida Convention, June 21 to 23, 2012 at Orlando World Center Marriott, Orlando, FL. 2012 Annual Asphalt Contractors Association of Florida Convention, July 19 to 21, 2012 at UUCF Convention, The Ritz-Carlton Orlando, Grande Lakes, Orlando, FL.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 93

Page 94 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX ALEX LYON & SON INC ROMULUS & LAPEER MI ......................................................87 ALEX PARIS CONTRACTING CO INC ............................................9 ALLU GROUP ................................................................................20 AMERICAN STATE EQUIPMENT ..................................................11 ARING EQUIPMENT CO INC ........................................................13 ASSET AUCTIONS ........................................................................84 ATLAS COPCO ..............................................................................55 BARGAINS ................................................................................80,81 BODINE MFG ................................................................................39 BURRIS EQUIPMENT CO..............................................................33 CAT AUCTION SERVICES ST THOMAS PA ....................................................................93 CEC ................................................................................................61 CEG SCALE MODELS ..................................................................75 CK POWER ....................................................................................33 CLASSIFIEDS ................................................................................82 CONSTRUCTION EQUIPMENT GUIDE WANTED ................................................................................83 TARGETED EMAIL ................................................................38 ONE BUY NATIONAL COVERAGE ......................................64 TESTIMONIAL........................................................................30 DARELL DUNKELL & ASSOC KALKASKA MI ........................................................................92 DODGE OF BURNSVILLE..............................................................44 DOOSAN INFRACORE AMERICA CORP ................................72,73 DOOSAN PORTABLE POWER ......................................................67 DOPPSTADT ..................................................................................60 DYNAPAC ......................................................................................70 ERB EQUIPMENT ..........................................................................19 EXODUS MACHINES ....................................................................59 FABCO EQUIPMENT INC ................................................................7 FABICK CAT ..............................................................................15,56 FARM-RITE EQUIPMENT INC ........................................................8 FELLING TRAILERS ......................................................................43 FINKBINER EQUIPMENT CO ........................................................11 FLANGE LOCK ..............................................................................24 FLUID CONTROL SERVICES ........................................................20 GARY CARLSON EQUIPMENT ....................................................10 GRINDERCRUSHERSCREEN.COM..............................................62 GROVE WORLDWIDE ..................................................................40 HARTLAND MACHINERY AUCTIONEERS TURTLE CREEK PA ..............................................................86 HOWELL TRACTOR & EQUIPMENT CO ................................78,96 HULTDINS INC ..............................................................................26 HYDRAULICIRCUIT TECHNOLOGY ............................................39 ILLINOIS TRUCK & EQUIPMENT ....................................................3 INDEXATOR INC ............................................................................25 INTELLIGENT SIGNAL TECHNOLOGY ........................................28 IRAY AUCTION FOLEY MN ............................................................................91

IROCK CRUSHERS........................................................................62 IRON PLANET ................................................................................89 JEFF BELZERS CHEVROLET ......................................................47 JJ SCHECKEL CORP ................................................................24,78 JOHN DEERE ................................................................................95 KAWASAKI CONSTRUCTION MACHINERY ................................71 KNAACK LLC..................................................................................44 KOHLS WEELBORG ................................................................48,49 KOMATSU AMERICA CORP ....................................................68,69 KOMPTECH ....................................................................................55 KUBOTA..........................................................................................66 LEADING EDGE ATTACHMENTS INC ..........................................39 LUPIENT ........................................................................................45 M ADAMS EQUIPMENT CO ..........................................................17 MB AMERICA INC ..........................................................................14 MCCANN INDUSTRIES INC ............................................................6 MCCLOSKEY INTERNATIONAL ....................................................65 MDS ................................................................................................39 METSO............................................................................................57 MID COUNTRY MACHINERY ........................................................27 MIDWEST VIBRO, INC ..................................................................28 MUSTANG MFG..............................................................................79 MYRON BOWLING AUCTIONEERS INC CHAMBERSBURG PA ..........................................................91 NORAM ..........................................................................................77 NORTRAX-MIDWEST ....................................................................21 PATTEN TRACTOR & EQUIPMENT CO ..........................................2 POWERSCREEN MW DEALER ....................................................58 PURPLE WAVE INC ......................................................................85 RDO EQUIPMENT/SCHARBER EQUIPMENT ..............................29 RITCHASON AUCTIONEERS LEBANON TN ........................................................................91 ROAD BUILDERS MACHINERY ................................................6,31 ROGERS BROTHERS CORP ........................................................26 ROLAND MACHINERY INC ........................................................5,18 RUDD EQUIPMENT ......................................................................23 SENNEBOGEN ..............................................................................63 SMITHCO........................................................................................50 STAR EQUIPMENT LTD ..................................................................6 STEPHEN PASSY ASSOCIATES ..................................................24 TEREX CRANES ............................................................................76 TITAN RENTS ................................................................................28 TOWMASTER INC ........................................................................51 TRAMAC BY MONTABERT ............................................................37 U-SCREEN......................................................................................62 VANDER HAAGS ............................................................................50 WAYNE PIKE AUCTION PRINCETON MN ....................................................................86

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2012 • Page 95

Featuring an ultra-quiet, redesigned operator station, the 755K Crawler Loader quietly goes about its business, letting its impressive performance do the talking. More weight, power, hydraulic flow, bucket capacity, and breakout force significantly boost productivity. Customerinspired enhancements include more control options, from V-pattern with steering pedals to joystick FNR. An innovative on-demand cooling system with optional hydraulic reversing fan. And quicker daily checks and less frequent periodic maintenance. Plus its IT4 diesel meets rigid emission standards, so you can work the 755K wherever there’s work, even in nonattainment areas. It’s the perfect machine for those who prefer less talk and more action.

THE STRONG, SILENT TYPE. www.holtequipment. net Bowling Green, KY 42101 270/842-3400 1-866/528-9699 London, KY 606/862-8447 1-877/231-7151 Louisville, KY 40223 502/253-3721 1-800/507-9705 Richmond, KY 859/623-2030 1-800/463-8722

Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989/777-0090 Fax: 989/777-1583

Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616/538-2400 Fax: 616/538-0449 3600 North Grand River Ave Lansing, MI 48906 517/321-8000 Fax: 517/321-6275

Northeast Detroit 65809 Gratiot Ave Lenox, MI 48050 586/727-7502 Fax: 586/727-7311

West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248/437-8121 1-800/457-8121 Traverse City 8300 M-72 East Williamsburg, MI 49690 231/267-5060 Fax: 231/267-5257

www.westsidetractorsales.com

Naperville, IL 60563 630/355-7150 Fax: 630/355-7173

Bloomington, IN 47403 812/333-9677 Fax: 812/333-9731

Rockdale, IL 60436 815/730-9011 1-800/937-3355 Fax: 815/730-9036

Fort Wayne, IN 46825 260/482-8576 Fax: 260/483-4057

Rockford, IL 60012 815/961-3160 Fax: 815/965-1810 South Holland, IL 60473 708/331-6362 Fax: 708/331-7334 Wauconda, IL 60084 847/526-7700 Fax: 847/526-3565

Indianapolis, IN 46219 317/544-3411 Fax: 317/544-3420 Lafayette, IN 47905 765/447-6933 Fax: 765/448-9038 South Bend, IN 46619 574/232-1461 Fax: 574/233-3324

Des Moines, IA

www.murphytractor.com

800/822-2212

Topeka, KS 800/279-6087

North Platte, NE 800/894-7060

Columbus, OH 800/222-2010

Fort Dodge, IA 800/362-2487

Ulysses, KS 800/472-9238

Omaha, NE 800/416-5095

Lima, OH 800/423-7445

Sioux City, IA 800/352-4693

Kansas City, MO 888/306-3434

Brunswick, OH 800/716-9796

Painesville, OH 866/800-1398

Cambridge, OH 740/439-2747

Poland (Youngstown), OH 866/503-7259

Waterloo, IA 800/772-2019 Dodge City, KS 800/794-0172 Great Bend, KS 800/264-4056 Park City, KS 800/262-0139

Springfield, MO 888/306-2656 Gering, NE 800/205-6784 Grand Island, NE 800/868-4017 Lincoln, NE 800/416-5518

Canton, OH 866/235-0438 Chillicothe, OH 740/663-5300 Cincinnati, OH 800/844-3734

Vandalia (Dayton), OH 800/233-4228 Cranberry Twp, PA 724/776-3636 Delmont, PA 724/837-4500

Page 96 • May 26, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE