Midwest 11 2016 by Construction Equipment Guide

Published Nationally

$3.00

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

Midwest Edition

www.constructionequipmentguide.com

May 21, 2016 • Vol. XX • No. 11 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910

Inside

Spending on Construction Rises in March

Modified Excavator Works on Mighty Mississippi...12

Rieth-Riley Leads Vital I-94 Repaving, Bridge Repair Work By Irwin Rapoport CEG CORRESPONDENT

RMS Cu stomers Play i n the S andbox. .. 18

Table of Contents ..............4 Truck & Trailer Section ........ ....................................39-51 Attachments Section ............ .................................... 55-58 Recycling Section ......73-92

Rieth-Riley Construction Co. Inc. crews are making steady progress in the Michigan Department of Transportation’s (MDOT) $13.9 million project to resurface Interstate 94 between Bridgman and Stevensville. The work began in mid-March and is scheduled to be completed on Oct. 21, although some of the work on eastbound I-94 will be completed in the 2017 construction season. The project, funded by 80 percent fed-

Auction Section ........97-103 Advertisers Index ..........102

see MDOT page 66

see BUDGET page 54

Minn. Senate Rejects $1.5M Public Works Bill By Kyle Potter

Business Calendar ............95

eral and 20 percent state funding, is one of several ongoing projects to resurface I-94. This section of repaving covers more than 7 mi. (11.2 km) of the highway in Berrien County between Red Arrow highway exit 16 in Bridgman and mile marker 22.6 east of Puetz Road and Stevensville Other aspects of the project include: bridge repairs, median cable barrier, guardrail, culvert, freeway signing and right-of-way fencing. “I-94 is a vital commercial and commuter corridor,” said Nick Schirripa, communica-

Construction spending increased by 8 percent in March compared to a year earlier and also was up slightly between February and March amid growing demand for many types of construction, as the spending total hit the highest level since October 2007, according to an analysis by the Associated General Contractors of America. Association officials said the growth comes amid strong private-sector demand and new federal investments in surface transportation programs. “Construction should be a significant contributor to economic growth in the remainder of 2016 and beyond,” said Ken Simonson, the association’s chief economist. “Right now the biggest challenge for contractors in many parts of the country is that they are worried about finding enough qualified workers to meet demand.” Construction spending in March totaled $1.138 trillion at a seasonally adjusted annual rate, 0.3 percent higher than the revised February total and 8.0 percent higher than in March 2015, Simonson said. Private residential spending increased by 1.6 percent for the month and 8.5 percent compared to 12 months earlier. Spending on multifamily residential construction jumped 5.6 percent for the month and 34.6 percent year-over-year, while single-family spending was flat compared to February but rose 13.4 percent compared to March 2015.

ASSOCIATED PRESS

ST. PAUL, Minn. (AP) Minnesota’s Senate narrowly rejected a Democratic plan to borrow $1.5 billion for public construction projects across the state

on May 5, providing just the latest reminder of the wide divide between Republicans and Democrats as the legislative session winds down with little settled. The public works package would have overhauled aging water infrastructure systems, pro-

vided money for upkeep at public college and university campuses and socked away $400 million for road and bridge repairs. But it failed by just one vote, as only one Republican joined the Senate’s 39 Democrats to approve it on a 40-26 vote. So-called bonding bills

require a three-fifths majority to pass. The borrowing package is one piece of the Legislature’s remaining to-do list, along with a bill offering tax cuts, funding transportation repairs and other spendsee PLAN page 54

Page 2 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

PROVIDING THE BEST IN

USED EQUIPMENT

Wisconsin & Upper Michigan Operations

2006 257B . . . . . . . . . . . $21,500 1997 CatCat D5M XL ..................................$39,500

2006 257B ................................$79,500 . . . . . . . . . . . $21,500 2005 CatCat D5NLGP

2006 257B . . . . . . . . . . . $21,500 2001 CatCat 160H ......................................$99,000

2006 Cat 257B . . . .........................$35,500 . . . . . . . $21,500 2009 Kobelco SK35SR

S/N 3939QC Hrs s/n6GN00322, SLK05074, OROPS, 2,035 HrsU/C CabGood, Heat, Hyd Cab Heat, Hyd QC 2,035 Hrs Cab Heat, Hyd

s/n SLK05074, 2,035 HrsHrs, Cab EROPS/AC, Heat, Hyd QC S/N AKD00932, 4424 Cab Heat, HydUC QCGood Sweeps, 4 Valve, 2,035 Hrs Cab Heat, Hyd

S/N s/n 2FM00608 12718 HRS, SLK05074, 2,035 Hrs EROPS, Cab Heat,High HydProfile, QC Cab Heat, Hyd QC R Ripper, Circle Tight 2,035 Hrs Cab Heat, Hyd

S/N PX15-22232 OROPS, s/n SLK05074, 2,035908 HrsHOURS, Cab Heat, Hyd QC AUX Cab HYD,Heat, BLADE, Hyd BUCKET QC 2,035 Hrs Cab Heat, Hyd

2006 . . . . . . . . . . . $21,500 1999 CatCat 951257B ..........................................$10,500

2006 Cat 257B . . . . . . . . . $21,500 2006 Kobelco SK480. .............................$59,500

2006 257B . . . . . . . . . . $21,500 1998 CatCat D6M LGP ...............................$44,000

2006 CatDeere 257B670G . . . . ....................$142,500 . . . . . . . $21,500 2010 John

S/N fair,Hyd bucket, s/n86J02337, SLK05074, undercarriage 2,035 Hrs Cab Heat, QC OROPS, hrs unknown Cab Heat, Hyd QC 2,035 Hrs Cab Heat, Hyd

S/Ns/n YS06U0571, EROPS, Stick, SLK05074, 9187 2,035Hrs, Hrs Cab Heat,Long Hyd QC Bucket, CabUndercarriage Heat, Hyd QC Fair 2,035 Hrs Cab Heat, Hyd

4JN01375, OROPS, s/nS/N SLK05074, 2,0351625 Hrs Hours, Cab Heat, Hyd QC Cab Sheet Heat, Hyd QC Good UC Good, Metal 2,035 Hrs Cab Heat, Hyd

S/N 2,035 628277, Hrs, Hyd QC s/n SLK05074, Hrs4283 Cab Heat, Heat, Hyd QC EROPS,Cab Snow Wing, Tires Good 2,035 Hrs Cab Heat, Hyd

1985 CatCat 140G ......................................$54,000 2006 257B . . . . . . . . . . . $21,500

2011 Komatsu PC650 2006 Cat 257B . . ...........................$75,000 . . . . . . . . $21,500

2008 Kobelco SK350 2006 Cat 257B . .............................$46,500 . . . . . . . . . $21,500

2012 980K ....................................$355,000 2006CatCat 257B . . . . . . . . . . . $21,500

S/NSLK05074, 72V08774, EROPS, Tires Balloon, s/n 2,035 Hrs Cab Heat, Hyd QC Blade Linkage Cab Heat, HydGood QC 2,035 Hrs Cab Heat, Hyd

S/Ns/n 65117, 14,7452,035 Hrs, Hrs EROPS, 6.75 Yd SLK05074, Cab Heat, HydBucket, QC UC Fair, Metal CabSheet Heat, Hyd QCGood 2,035 Hrs Cab Heat, Hyd

S/N YC08-U1859,11101 EROPS, s/n SLK05074, 2,035HRS, Hrs Cab Heat,BUCKET Hyd QC 60", GOOD CabUC Heat, Hyd QC 2,035 Hrs Cab Heat, Hyd

S/N W7K00666, 6905 Hrs, EROPS, s/n SLK05074, 2,035 Hrs Cab Heat, Hyd QC Auto Good CabLube, Heat,Tires Hyd QC 2,035 Hrs Cab Heat, Hyd

2006 257B . . . . . . . . . . . $21,500 2011 CatCat 930H ......................................$75,000

2006 Cat 257B . . . . . . . . . . $21,500 2007 Hitachi ZX120...............................$64,500

2006 257B . . . . . . . . . . . $21,500 2012 CatCat 262C2......................................$26,500

2006 Cat 257B . . . . . . . . . . . $21,500 2006 Bobcat S300 ................................$19,500

S/N DHC03051, 9873 s/n SLK05074, 2,035 HrsHrs, Cab EROPS/AC, Heat, Hyd QC Heat,Bucket Hyd QC 4YD RideCab Control, 2,035 Hrs Cab Heat, Hyd

S/N 5116 Hrs,Hrs EROPS, AC,Hyd Bucket, s/n071467, SLK05074, 2,035 Cab Heat, QC Heat, Hyd QC UCCab good, Hyd Thumb 2,035 Hrs Cab Heat, Hyd

S/N 2847Hrs Hrs,Cab EROPS, AC, QC Case s/nTMW00469, SLK05074, 2,035 Heat, Hyd Cab Heat, Hyd QC 2 Tires Poor Control, 2 Speed, 2 Tires Good 2,035 Hrs Cab Heat, Hyd

S/N 5311112992,035 4261Hrs Hours, EROPS/Heat, s/n SLK05074, Cab Heat, Hyd QC Cab Heat, HydTires QC Fair Man Cplr, Bucket, 2,035 Hrs Cab Heat, Hyd

Wisconsin & Upper Michigan Operations

800.353.1944 ... For Used Equipment 877.754.4477.... For Used Work Tools & Attachments 414.461.9100 ... In WI and Upper Michigan

Used Equipment: Jeff Speer or Wes Ensrud Used Work Tools & Attachments: John Riechers 11200 W. Silver Spring Rd., Milwaukee, WI 53225

www.fabickcat.com Hundreds of machines. Listings updated daily.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 3

2005 Ingersoll Rand SD79DF .... $44,500

2007 Hamm 3412 Padfoot ........ $69,500

2011 Caterpillar CS56 ............ $84,500

2011 Volvo D112HF…............. $64,500

66” vibratory padfoot drum compactor, canopy, Cummins 4.5L 99HP diesel, 84” hydraulic leveling blade, 14.9-24 tires, 17,780 lbs., 218 hrs. ............... #8998

84” vibratory padfoot, canopy, Duetz BF4M 127HP diesel, 23.1-26 tires, 25,500 lbs., 1,174 hrs. ............. ..................................................................... #10534

A/C, Cat C6.6 Acert 156HP diesel, 84” vibratory smooth drum compactor, 18-26 tires, 25,200 lbs., 1,984 hrs. ...................................................#10865

48HP, diesel, 78” vibratory drum, hydrostatic drive, front and rear spray system, 4,200 VPM, single/double drum vibration, 27,670 lbs., 325 hrs. ........ #10802

Illinois T Truck & Equipment • 320 Briscoe Drive, Morris, Illinois 60450 rental@iltruck.com sales@iltruck.com • www www.iltruck.com .iltruck.com • (815) 941-1900

Page 4 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWesT eDITIon

In ThIs Issue 12

Circulated Throughout

Founder, Publisher & CEO Midwest Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Main office

To r e a d t he s e s t o ri e s a nd ma ny m o re , v is it w w w . co n s t r u ct io ne q ui pm e nt g uid e . co m

specIal secTIon 73 RECYCLING, CRUSHING AND SCREENING Be sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

26 FARM-RITE EVENT IN DASSEL DRAWS NEARLY 600 ATTENDEES Farm-Rite held an open house at its Dassel, Minn., location on April 23. The event drew nearly 600 attendees, which featured door prizes, lunch and demonstrations.

28 COLUMBUS EQUIPMENT COMPANY CELEBRATES

Toll Free Fax Web site Editorial e-mail Advertising e-mail For advertising rates Contact

12 MODIFIED EXCAVATOR MOVES PRODUCT FROM MIGHTY MISSISSIPPI

MACHINE CONTROL DEMONSTRATIONS

For one company, River Bend Ag LLC in New Madrid, Mo., the need arose to improve the efficiency with which it unloaded fertilizer from barges at its dock on the Mississippi.

Roland Machinery Co. will be hosting intelligent machine control demonstrations at its location at 604 Stokely Drive, Deforest, Wis., on June 15.

14 TITAN MACHINERY HOSTS TWO OPEN HOUSES IN

36 GEHL PRESENTS AWARD TO FARMER’S IMPLEMENT

OMAHA, DULUTH Titan Machinery held two open house events, one at its new Omaha, Neb., location on April 29 to celebrate the company’s move to its brand new dealership location, and one at its Duluth, Minn., location on May 5.

16 UNDERHILL JOINS CMW EQUIPMENT AS AREA MANAGER Dave Underhill has joined CMW Equipment Inc. as an area manager of Southeast Missouri.

17 MCCANN TO HOST OPEN HOUSE AT ITS WAUCONDA, ILL., BRANCH McCann Industries Inc. will be hosting an open house at its Wauconda branch located at 1360 N. Rand Rd. Wauconda, Ill., on June 10 from 10 a.m. to 2 p.m.

18 RMS CUSTOMERS PLAY IN THE SANDBOX AT KOMATSU DEMO Road Machinery & Supplies Co. held a customer demo event on May 9 at the Extreme Sandbox in Hastings, Minn., to showcase the newly introduced Komatsu PC490LCi-11.

20 STOWERS MACHINERY HOSTS 2016 MACHINE DEMO DAY The demo day proved to be a great opportunity for Stowers to demonstrate how to use machine technology, equipment management technology, and job site technology.

OF MINERAL POINT, WIS.

315/866-1423 800/988-1203 315/866-1379 e-mail khogeboom@cegltd.coom

Toll Free Fax

Contact

440/243-9690 800/810-7640 440/243-9691 e-mail ebryden@cegltd.com

38 LANO EQUIPMENT HOSTS CUSTOMER

Toll Free Fax

equIpMenT 39 MACK mDRIVE HD transmission 44 XL SPECIALIZED TRAILERS XL 90 HDE 73 JCB Contractor Breakers

DeparTMenTs 95 CLASSIFIEDS 95 BUSINESS CALENDAR 97 COMING AUCTIONS

Ed Bryden • Central and Eastern Indiana • Michigan • Ohio • Kentucky

Toll Free Fax

Contact

Guests had the opportunity to get in the driver’s seat of the newest models of equipment. Equipment representatives of Bobcat, Doosan, Kubota, Toro and Felling Trailers, among others, were available to answer questions about the machines.

Joseph S. McKeon • Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

Kent Hogeboom National Sales Manager

Farmer’s Implement of Mineral Point was recognized and awarded for its top performance at the Manitou Americas corporate headquarters in West Bend, Wis., during the “Next Big Thing” new product introduction dealer event.

APPRECIATION EVENT

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com

773/769-4090 800/632-0233 773/769-4280 e-mail jmckeon@cegltd.com

Columbus Equipment Company held a grand opening event on May 9 at the dealership’s new Columbus, Ohio, facility.

32 ROLAND MACHINERY TO HOST INTELLIGENT

Edwin M. McKeon Sr. Joseph S. McKeon Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

Toll Free Fax

NEW FACILITY

feaTures

• North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota • South Dakota

952/353-1770 866/413-4265 952/353-2750 e-mail pkiel@cegltd.com

Mobile

Facebook

Twitter

YouTube

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2016, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 5

Quality Used Equipment...with support to back it up

Kawasaki 115ZIV-2, ’99, 18,714 hrs ......$29,000

Komatsu PC300LC-7, ‘02, 6,764 hrs ........$90,000

DOZERS

MATERIAL HANDLERS

SKID STEER

EXCAVATORS

Case 1650K, ’04, 391 hrs ........................$49,000 Cat D4H XL, ‘86, 6,557 hrs ......................$21,500 Komatsu D51PX-22, ’07, 5,510 hrs ......$114,500 Komatsu D51PX-22, ’08, 4,247 hrs ......$114,500 Komatsu D61EX-15EO, ‘12, 3,158 hrs ..$139,000 Komatsu D61PX-15EO, ‘08, 4,180 hrs ....$99,000 Komatsu D61PX-15 GPS, ’11, 1,783 hrs................ ................................................................$175,000 Komatsu D61PX-23, ’14, 1,838 hrs ......$179,000 Komatsu D61PX-23, ’14, 2,367 hrs ......$179,000 Komatsu D65EX-15, ’06, 2,301 hrs........$144,500 Komatsu D65PX-15EO, ’06, 11,070 hrs ..$59,000 Komatsu D65EX-15EO, ’07, 3,934 hrs ..$149,500 Komatsu D65PX-15EO, ‘07, 4,704 hrs ..$149,500 Komatsu D65PX-17, ‘12, 1,709 hrs ......$215,000 Komatsu D65WX-15EO, ’07, 3,959 hrs..$157,000 Komatsu D155AX-6, ’11, 3,694 hrs ......$265,000 Komatsu D275AX-5, ’03, 23,015 hrs ......$99,500

Cat 365CL-MH, ‘08, 10,428 hrs ............$137,500 Gehl RS8-42, ’03, 3,594 hrs ....................$37,500 Komatsu P400LC-8MH, ’08, 6,095 hrs ..$219,500 Sennebogen 825M D, ’13, 17 hrs ..................Call

New Holland L230, ’14, 295 hrs ..............$49,399

Atlas Copco MB1200 Hydraulic Hammer, ’05, Rebuilt & Painted......................................$21,799 Case CX135SR, ‘11, 2,350 hrs ................$88,000 Case CX160, ‘05, 6,579 hrs ....................$45,599 Cat 330CL, ’02, 12,032 hrs ......................$59,500 Cat M318, ‘96, 6,440 hrs ........................$39,500 Deere 200C LC, ’04, 8,988 hrs ................$60,000 Deere 225C LC, ’04, 7,029 hrs ................$62,667 Deere 350DLC, ’07, 5,837 hrs ..............$109,500 Deere 350DLC, ’07, 6,832 hrs ..............$109,500 Gradall XL3100, ’03, 4,889 hrs................$47,900 Kobelco SK485-9, ‘12, 3844 hrs ............$184,599 Komatsu PC138USLC-8, ’12, 2,056 hrs $105,000 Komatsu PC138USLC-8, ’13, 2,432 hrs $115,000 Komatsu PC200LC-7, ‘03, 8,117 hrs........$65,000 Komatsu PC200LC-7, ’03, 7,248 hrs........$45,000 Komatsu PC210LC-10, ’14, 978 hrs ......$150,000 Komatsu PC210LC-10, ’14, 1,307 hrs....$178,000 Komatsu PC210LC-10, ‘15, 812 hrs ......$169,000 Komatsu PC220LC-6, ‘98, 19,095 hrs......$37,100 Komatsu PC220LC-6, ’99, 12,994 hrs......$34,000 Komatsu PC220LC-7, ‘04, 12,969 hrs......$48,000 Komatsu PC220LC-8, ’06, 9,204 hrs........$83,000 Komatsu PC220LC-8, ‘06, 5,300 hrs........$79,000 Komatsu PC228USLC-1, ’99, 4,400 hrs ..$54,500 Komatsu PC228USLC-8, ’12, 3,449 hrs $155,000 Komatsu PC228USLC-10, ’14, 923 hrs ..$186,599 Komatsu PC300LC-6, ’97, 6,802 hrs........$40,000 Komatsu PC300LC-7, ’02, 6,764 hrs........$90,000 Komatsu PC300LC-7 w/Shear, ‘06, 7,463 hrs ...... ................................................................$265,000 Komatsu PC300LC-7EO, ’07, 8,139 hrs ..$60,000 Komatsu PC300LC-7EO, ’06, 7,736 hrs $110,000 Komatsu PC300LC-8, ‘09, 9,584 hrs......$119,000 Komatsu PC360LC-10, ’12, 1,148 hrs....$264,500 Komatsu PC400LC-6, ‘02, 13,868 hrs......$49,000 Komatsu PC400LC-7, ’06, 10,541 hrs......$76,500 Komatsu PC400LC-7EO, ’07, 10,905 hrs $92,500 Komatsu PC400LC-7EO, ‘07, 10,448 hrs $99,500 Komatsu PC400LC-8, ‘08, 7,118 hrs......$127,000 Komatsu PC490LC-10, ‘13, 2,977 hrs....$268,999 Komatsu PC490LC-10, ‘12, 3,136 hrs....$265,000 Komatsu PC490LC-10, ‘12, 4,306 hrs....$245,000 Komatsu PC490LC-10LR, ‘10, 4,720 hrs$289,500 Komatsu PC600LC-7, ’05, 10,328 hrs....$199,500 Komatsu PC600LC-8, ’06, 10,478 hrs....$199,500 Komatsu PC650LC-3, ’89, 20,397 hrs......$36,200 Komatsu PC750SE-6, 12,835 hrs ............$39,000 Volvo EC220DL, ’13, 2,151 hrs ..............$134,500 Volvo EC380DL, ‘11, 4,017 hrs ..............$150,000 Volvo EC380DL, ‘11, 2,847 hrs ..............$155,000

FORESTRY Deere 759J, ’14, 1,186 hrs ....................$435,000 Komatsu 911.4, ’11, 6,132 hrs ..............$359,000 Komatsu 911.4, ’10, 5,225 hrs ..............$370,000 Ponsse Ergo Harvester, ‘05, 13,239 hrs $160,499 Ponsse Ergo, ‘05, 17,610 hrs ................$125,000 Valmet 931.1, ‘11, 7,200 hrs ................$349,000

OFF HIGHWAY TRUCKS Komatsu HD465-7, ’06, 18,843..............$219,500

V I S I T

TRAILERS Trailboss 25-Ton, ’90 ................................$7,500

MILLING

WHEEL LOADERS

Wirtgen W60, ’08, 628 hrs ....................$144,900 Wirtgen W600, ’03, 2,403 hrs..................$59,500 Wirtgen W2000, ‘08, 7,798 hrs..............$199,999 Wirtgen W2000FCS, ’01, 11,797 hrs ......$99,000 Wirtgen W2100, ’04, 8,538 hrs..............$209,500 Wirtgen WR240, ‘06, 7,913 hrs..................$CALL

Deere 544K, ’13, 1,023 hrs....................$159,000 Deere 624K, ’13, 948 hrs ......................$166,000 Deere 624K, ’13, 905 hrs ......................$166,000 Kawasaki 115ZIV-2, ’99, 18,714 hrs........$29,000 Komatsu WA200PZ-6, ‘14, 957 hrs........$115,000 Komatsu WA270-7, ’15, 177 hrs............$139,000 Komatsu WA270-7, ’15, 759 hrs............$129,000 Komatsu WA380-6, ’11, 2,888 hrs ........$150,000 Komatsu WA380-6, ’12, 2,571 hrs ........$165,000 Komatsu WA380-7, ‘12, 3,025 hrs ........$147,500 Komatsu WA400-5L, ’05, 10,968 hrs ......$72,999 Komatsu WA500-6, ‘09, 9,628 hrs ........$207,299 Komatsu WA500-7, ‘12, 4,618 hrs ........$265,000 Komatsu WA500-6, ’09, 8,621 hrs ........$211,399 Terex TL300-2, ’08, 2,441 hrs..................$69,500

COMPACTION Bomag BC61RB, ’00, 15,862 hrs ............$49,900 Bomag BC1172RB, ’05, 15,531 hrs ........$89,900 Hamm HD8 VV, ‘12, 324 hrs ....................$21,000 Hamm HD8 VV, ‘12, 493 hrs ....................$21,000 Hamm HD14VV, ’09, 0 hrs on engine ......$25,799 Hamm HD120HV, ‘03, 2,690 hrs ..............$32,999 Hypac C778A, ‘95, 6,674 hrs ....................$9,000 Stone WP4100 Double Drum, ‘09, 1,018 hrs ........ ..................................................................$14,599

PAVING Cat AP-1000B, ‘03, 5,781 hrs ..................$53,399 Leeboy 8500T, ’06, 5,859 hrs ..................$20,799 Vogele 5203-2, ’08, 4,307 hrs ..............$115,000 Vogele 880WB, ’05, 5,862 hrs ................$26,699

CRUSHING/SCREENING Kleemann MSD190D Screen, ’13, 688 hrs ............ ................................................................$255,000 Kleemann MC110Z Crusher, ’13, 714 hrs.............. ................................................................$475,000 Kleeman MR130Z, ‘11, 6,158 hrs..........$415,000 Metso LT 1415, ‘06, 7,401 hrs....................$CALL

Komatsu D61PX-15 GPS, ’11, 1,783 hrs ........$175,000 Komatsu PC300LC-7EO, ’07, 8,139 hrs ..............$60,000

Financing Available for Qualified Buyers

15 Roland Branch Locations in IL, IN, MI, MO, and WI

Call AJ Perisho (217) 789-7711 • Email: aperisho@rolandmachinery.com

R O L A N D M A C H I N E R Y . C O M

Page 6 â&#x20AC;˘ May 21, 2016 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke â&#x20AC;˘ (630) 739-7770

Excavator Rental Specials Bolingbrook, IL

Serving the Constructor ÂŽ

View our complete Used & â&#x20AC;&#x153;Like Newâ&#x20AC;? inventory at McCannOnline.com

Clean, reliable equipment

Competitive rates

Rent by the day, week, or month

Illinois

Delivered to your job site

Addison 630-627-0000 Bolingbrook* 630-739-7770

2012 Case 850L, s/n NCD80092, 1480 Hrs, Cab w/Heat & AC, 124â&#x20AC;? Blade, 24â&#x20AC;? Grousers .. ............................................................$89,800

2013 Case CX80, s/n DAC080K3NCSLB7386, 2008 Case CX350B, s/n N8SAP1146, 4780 1650 Hrs, 11â&#x20AC;&#x2122;7â&#x20AC;? Arm, 18â&#x20AC;? Rubber Tracks, Hrs, Cab w/AC, 21â&#x20AC;&#x2122;2â&#x20AC;? Boom, 10â&#x20AC;&#x2122;8â&#x20AC;? Arm, Double Acting Hyds, No Bkts..............$73,900 Pattern Selector, 30â&#x20AC;? and 66â&#x20AC;? Buckets ............ ..........................................................$119,900

2012 Case Cx160C, s/n DAC160K6NCSAF1112, 2500 Hrs, Cab w/AC, 9â&#x20AC;&#x2122;11â&#x20AC;? Arm, 24â&#x20AC;? Shoes, Single Acting Hyds, Coupler, Warranty through 03/17 ................................................$118,900

Chicago 312-942-9200 Crestwood 708-597-3110

CX130 Excavator

CX160 Excavator

CX210 Excavator

CX225 Excavator

MC r h EJH EFQUI $410/Day, $1,230/Week, $3,690/Month

MC r h EJH EFQUI $475/Day, $1,425/Week, $4,275/Month

MC r h EJH EFQUI $580/Day, $1,740/Week, $5,220/Month

MC r h EJH EFQUI $755/ Day, $2,265/Week, $6,795/Month

McHenry* 815-385-0420

Rent Today!

Wauconda 847-526-9444 2012 Case CX350C, s/n DAC350K6NCSAP1212, 2150 Hrs, Cab w/AC, 10â&#x20AC;&#x2122;8â&#x20AC;? Arm, 32â&#x20AC;? Shoes, Single Acting Hyds, Coupler, Warranty through 07/17......$223,900

2007 Case SV208, s/n DDD002010, 1600 Hrs, ROPS, 66â&#x20AC;? Wide Smooth Drum Roller .... ............................................................$55,850

2012 Case CX210C, s/n DAC210K6NCSAH1134, 1820 Hrs, Cab w/AC, 9â&#x20AC;&#x2122;8â&#x20AC;? Arm, 32â&#x20AC;? Shoes, Double Acting Hyds, Coupler, Warranty through 03/17......$136,890

CX240 Excavator

CX330 Excavator

MC r h EJH EFQUI $700/Day, $2,100/Week, $6,300/Month

MC r h EJH EFQUI MC r h EJH EFQUI equipment. Call us today to supply your next $875/Day, $2,625/Week, $7,875/Month $1,235/Day, $3,705/Week, $11,115/Month

2012 Case DV202, s/n DDDDV202NCTF2016, 1175 Hrs, ROPS, Right Side Drive Lever, 47â&#x20AC;? Drum ..................................................$27,500

McCann CX460 Rents aExcavator full line of heavy and light construction rental. McCannOnline.com

Indiana Schererville* 219-865-6545 *Case authorized dealer location

Custom Made Products Co. Humboldt, IA Lease To Own x

2012 Mustang 2076 skid w/ cab, heat, a/c, joystick controls, 2 speed, counterweight, block heater, quicktach, and 1295 hours.

1HZ Âś 5HGL +DXO VSOLW WLOW WUDLOHU ZLWK DQ OE GVWR, electric brakes, pallet fork holders, gravel guard protection, and dual locking cylinders.

3DFNDJH 'HDO IRU 2QO\ÂŤ

(800) 760-7871 Call Anytime

www.gncmp.com 100+ Scrapers on Hand at 16 Locations FOR SALE OR FOR RENT

Locations: Humboldt, Bayard, De Soto, Iowa Falls, Liscomb, Manchester, Britt, Osceola, Sac City, Woodbine, Readlyn, Chariton, Fremont, Newton, Wayne, NE & La Plata, MO

We Will Not Be Undersold!

1RZ 2QO\ÂŤ 17,500# zero tail swing excavator w/ 57hp, cab, heat, a/c, quick coupler, rear counterZHLJKW ORQJ GLSSLQJ DUP Âś GLJ GHSWK D Â´ EXFNHW

1RZ 2QO\ÂŤ

- - _ 'HV 0RLQHV Ä &HGDU 5DSLGV Ä :DWHUORR Ä $PHV _ ZZZ Z VWDUHTXLS FRP

13 yd Ashland I-130 XL2s (New & Used) Call

GRADERS

HOLCOMB

Artâ&#x20AC;&#x2122;s-Way Graders, (New & Used) ................................................Call Johnson Graders (New & Used)....................................................Call 8â&#x20AC;&#x2122;-16â&#x20AC;&#x2122; With & Without Rear Steer

8 yd to 18 yd, (Dolly Wheel or Direct Mount - New & Used) ........Call

ASHLAND Rough terrain forklift w/ 8,000# cap, 44' boom, O-ROPS, standard seat, & two joystick controls.

*to mo

18 yd Ashland I-180 TS2s (New & Used) Call

150 gallon tar pot/applicator diesel powered with a heated applicator hose, engine cover, air blowout, tool box, slow moving vehicle sign, and spare parts kit.

5HDG\ WR *RÂŤ

elivery! Free Dst areas

18yd Ashland I-180 TS2s, (New & Used) ....................................Call 17 1/2yd Ashland I-175 XL2, (New & Used) ................................Call 15 1/2yd Ashland I-155 TS2s, (New & Used) ..............................Call 15 1/2yd Ashland I-155 XL2s, (New & Used) ..............................Call 13yd Ashland I-130 TS2s, (New & Used) ....................................Call 13yd Ashland I-130 XL2s, (New & Used) ....................................Call 11yd Ashland I-110 TS2s, (New & Used) ....................................Call 11yd Ashland I-110 XL2s, (New & Used) ....................................Call 9 1/2yd Ashland I-950s, (New & Used) ........................................Call Ashland Groundhog GH2500, (New & Used) ................................Call

GARFIELD 12yd Garfield Model 1150s, (Used)..............................................Call 13yd Garfield 1350s, (New & Used) ............................................Call 8yd Garfield Model 850s, (New & Used)......................................Call 5yd Garfield Model 550s, (New & Used)......................................Call

BIG DOG 8 yd Big Dogs, (New & Used) ......................................................Call 6 1/2 yd Big Dogs, (New & Used) ................................................Call 5 yd Big Dogs, (New & Used) ......................................................Call 12â&#x20AC;&#x2122; Feedlot Box Scrapers..............................................................Call 10â&#x20AC;&#x2122; Feedlot Box Scrapers..............................................................Call 12â&#x20AC;&#x2122; Box Scrapers ..........................................................................Call 10â&#x20AC;&#x2122; Box Scrapers ..........................................................................Call 8â&#x20AC;&#x2122; Box Scrapers ............................................................................Call

IRONWOLF 8-12 yd ..........................................................................................Call

LEON 10-13 1/2 yd ..................................................................................Call

ROWSE 7 yd Rowse Model 7002 & 7004 ..................................................Call 5 yd Rowse Model 7002 & 7004 ..................................................Call 3 yd Rowse Model 3002................................................................Call

MISCELLANEOUS 1 1/2 yd, 3 yd & 4yd Durabilts, (New & Used) ............................Call 3/4 yd G&A Mini Scraper, (New & Used)......................................Call

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 7

PAVERS / ROAD WIDENERS BOMAG CR362L - ‘14, 623 Hrs, Track Paver, Stretch 16 Electric Screed, Topcon V System and More, #C000555 ............................................................................................................$285,510 BOMAG CR452L - ‘15, 275 Hrs, Rubber Tired Paver, w/Stretch 20E, Top Con Controls $338,500 BOMAG CR662RM - ‘15, 140 Hrs, Material Transfer w/Hopper, #C000763 ....................$474,639 GOMACO GT6300 - ’00, Curb And Gutter Machine, 42” Trimmer Head w/ Hydraulic Raise/Lower Shift, 16’ Conveyor, 36” Stroke Legs, And More..............................................................$37,823 GOMACO RC240-24 - ‘15, 11 Hrs, Self Propelled Rubber Tired Placer to - 28 ft w/24” Belt.......... ........................................................................................................................................$112,000 LEEBOY 8500 HD - ‘00, 2915 Hrs, Hatz 3 Cylinder, Diesel Engine w/8-15’ Legend Propane Screed Electronic Grade Controls, Ready to Work, #C000969..........................................$28,900 MIDLAND SPD6 - ‘15, 245 Hrs, Right and Left Discharge 1-6 ft, Hyd Strike Off, Hyd Pushrollers, Washdown System, #C000820 ......................................................................................$129,950 MIDLAND SPR6 - ‘15, 32 Hrs, Right Hand Discharge, 1-6ft, # C000914 ........................$117,935 MIDLAND SP10 - ‘03, 3682 Hrs, Dual Discharge, Deere Powered, ***3-1ft Ext, 4-2ft Ext, 2-3-4ft Hyd Ext, #C000926 ..............................................................................................$75,000 P.O.R. items may be on rent causing pricing and hours to vary.

MILLING MACHINES BOMAG BM1200/35 - ’15, 225 Hrs w/Tracks, 3ft and 4ft Drum, Front Conveyor, #C000846 ........ ........................................................................................................................................$482,510

CRUSHING AND SCREENING KAFKA TRI PACK CONVEYOR - ‘14, 36” x 70’ ................................................................$115,950 KPI FT4250 CC - ‘06, Track Mounted Impactor Plant, 42” x 50”, 4 Bar Rotor Impactor, Finger Grizzly On 50” x 18’ Step Deck Variable Speed Feeder, 6’ x 12’ 2-Deck Screen, 48” x 40’ End Discharge Conveyor, All Hydraulic Plant, #C000974 ......................................................$185,000 NEW SANDVIK CJ412 PORTABLE JAW PLANT - ‘14, 47” x 33” + Much More ......................P.O.R.

ROLLERS SAKAI R2H2 - ’15 301 Hrs, 84”, 3 Wheel Static, #C000786 ................................CALL FOR PRICE SAKAI SW652 - ‘ 15, 268 Hrs, 58” Double Drum, Vibratory Rollers, #C000744..............$72,505 SAKAI SW990 - ’14, 721 Hrs, 84” Double Drum Vibratory Roller, #RR10133 ................$116,335 SAKAI SW502 - ‘13, 801 Hrs, 51’ Drum 9000 lb remaining std and or eptw warranty, #C000212 ..........................................................................................................................................$35,148 SAKAI SW300 - ‘13, 149 Hrs, 40” Double Drum Vibratory Roller, #C000211, S/N 40156 ............ ....................................................................................................................................$33,819.31 SAKAI GW750-2 - ’14, 387 Hrs, Vibratory Pnuematic Tire Roller, #C000533 ................ $112,200 *Comes with any remaining standard and 3 year extended power train warranty.

EXCAVATORS GRADALL XL4100 - ‘98, 8884 Hrs, Workable, as is, #62013A, S/N 413282 ....................$25,000 GRADALL XL4100 II - ‘06, 13,111 Hrs, Good Condition, #C000922..................................$58,500 GRADALL XL4100IV - ‘13, 2082 Hrs, 6x4 Highway Wheeled Excavator, Tier 4 Engine, Bucket Carrier, #C000920 ..........................................................................................................$245,950 GRADALL XL4100IV - ‘15, 665 Hrs, 6x4 Highway Wheeled Excavator, Tier 4 Engine, Bucket Carrier, #C000740 ..........................................................................................................$284,156

Contact Tim or Marty in Illinois

1-800-307-0221

treuss@finkbinerequipment.com mahrendt@finkbinerequipment.com Photos & Detail Descriptions visit: www.finkbinerequipment.com

GROVE RT880E 80 TON CAPACITY ROUGH TERRAIN CRANE, WITH A 41’ TO 128’ BOOM, 33’ TO 56’ BI-FOLD SWINGAWAYS, MAIN AND AUXILIARY HOISTS, BLOCK AND BALL. 2008 TO 2015 MODELS AVAILABLE, FROM $385,500

LIEBHERR R954BHD W/ LABOUNTY MSD4500R SHEAR

YOUR AUTHORIZED DEALER

in WISCONSIN and UPPER MICHIGAN for:

GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS • LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLER CRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/ JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAG CRUSHERS • MANITOWOC CRANES

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT JCI K-400 PORTABLE CONE CRUSHER, 400 HP Electric Feed Conveyor, Side Discharge Conveyor, Hyd. Leveling Jacks, Tri-Axle Running Gear, 2006....................................................................................................................$345,000 JCI 6X20TD PORTABLE SCREEN PLANT, Underscreen Discharge Conveyor, Two (2) Cross Conveyors, Electric Control Panel, 2012 ............................................................................................................................................$175,790 CEDARAPIDS 4136 PORTABLE TWIN ROLL PLANT, Allis 5’x16’ SD Screen, Cummins V-12 Power, Tandem Axle Chassis, Hydraulic Leveling ..................................................................................................................................$61,000 METSO/NORDBERG MODEL HP300 CLOSED CIRCUIT PORTABLE CONE PLANT, with a 6'x20' Triple Deck Screen. 2003 Model Year ................................................................................................................................................$360,000

CRANES GROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom, 32’ to 56’ Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work ....................................$124,500 GROVE RT855B 55 TON ROUGH TERRAIN CRANE, 1995, with Cummins diesel, 37’ to 115’ boom, 35’ to 60’ swingaway, LMI, Grove model HO30 main & aux. hoists, 29.5x25 tires ..............................................$139,500 AMERICAN 5300, 1988, 70 Ton Crawler Crane, Cummins w/3 Stage Converter, CLL on One Drum, Third Drum, Independent Travel, 130’ Boom, 30’ Jib ................................................................................................$139,500

SCRAP HANDLING EQUIPMENT LIEBHERR R954BHD WITH A LABOUNTY MSD4500R SHEAR, Carrier and shear have been refurbished ..CALL

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Lanny Peterson at:

lpeterson@amstate.com or mobile 1-715-574-8089 or 1-800-242-7113 Visit us at: www.amstate.com

Page 8 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Gary Carlson Equipment: Now With Two Locations! 1380 W County Rd C Roseville MN, 55113 10720 Mankato St. NE Blaine MN, 55449

Ph o n e 763.792.912 3 Fax 651.789.0114

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees WHEEL LOADERS

Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25 rubber, 15K hours, work ready . . . . . . . . . . . .$42,500 Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . . . .$79,500 John Deere 624G, 1996, EROPS, quick coupler, GP bkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$46,000 Volvo L60E, 2005, EROPS, coupler, aux hyd, boom susp, 20.5R25, v. good . . . . . . . . . . . . . . . . . .$89,500 COMPACTORS

IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean $69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000 (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500 LANDSCAPING

Case/IH 485 Utility Tractor, 1986, Case 3 cyl dsl engine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd angle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500 CRAWLER LOADERS

Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt .$37,500 Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000

OFF ROAD HAULERS Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready . . . . . . . . . . . . . . . .$127,500 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites . . . . .$87,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 CRAWLER TRACTORS

Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6" TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000 (5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALL Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB coupler, plumbed, 8’6” width, nice, work ready . .CALL Volvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing very good condition . . . . . . . . . . . . . . . . . . .$159,000 TRUCKS & TRAILERS

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL AIR COMPRESSORS

IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL SPECIALS

(12) Allmand Light Plants, 2008-2010, diesel, s/a towtype, (4) MH lights, excellent . . . . . . . . .From $5,200

(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, BACKHOES winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea. Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000 Case 580L Rubber Tire Loader Backhoe, 1997, (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea. DRILLS John Henry Drill Mtd on Cat 320N, 1994, 24' mast, CRANES Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, Duraquip dust collection . . . . . . . . . . . . . . . .$150,000 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 MISCELLANEOUS Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom (2) Balderson Broom Attachment for Cat IT Machines, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. MOTOR SCRAPERS

ATTACHMENTS Cat 613C Water Wagon, 1994, 5000 gal drop tank, BUCKETS ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 PC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good Over 100 Excavator, Loader, Specialized & Grapple condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Buckets in Stock Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice -Call For Your Needs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, HYDRAULIC EXCAVATORS excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick couOthers Available Call pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000 Prices Are Negotiable - At Your Inspection Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber, All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC. operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER

Page 10 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NEW M-SERIES IN STOCK! Authorized Bobcat Dealer

2015 Bobcat S595 - Call for Details Bobcat Toolcats In Stock

Bobcat Excavators in Stock, Call for Pricing

Doosan DX140LC Excavator Available for Rent

Largest Selection in the Midwest!

2015 Bobcat T770 - Call for Details

USED EQUIPMENT ®

Authorized Bobcat Dealer Bobcat 440 ................Starting at $4,500 Bobcat 463’s ..............Starting at $8,000 Bobcat 542B ..............Starting at $6,900 Bobcat 642 ..............................$7,500 Bobcat 642B ............................$8,500 Bobcat 743 ................Starting at $8,000 Bobcat 751 ......Several Starting at $9,900 Bobcat 753 ..............Starting at $10,000 Bobcat 763F, Series, Open Cab ....$11,500

Bobcat 773G, With Heat ............$15,900 Bobcat 843, Heated Cab ............$10,000 Bobcat 853’s ............Starting at $11,000 Bobcat 863, With Heat ..............$12,900 Bobcat 863G ............................14,900 Bobcat 873 ............................$17,900 Bobcat S130, 2006, Heated Cab ......CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours....Starting at $14,900 Bobcat S250..............Starting at $17,500

Compact Track Machines Bobcat T190’s............Starting at $17,500 Bobcat T200..............Starting at $17,500 Bobcat T250, Gold ......Starting at $24,500 Bobcat T300..............Starting at $25,000

Other Brands Gehl 4615 Skidloader, Open Canopy $8,500 Mustang 2105 ............................CALL New Holland L175........................CALL John Deere 250/260 Models Available...... ..............................................CALL

Excavators Bobcat 331’s, Several w/Heat & Open Canopys ..................Starting at $15,900 Bobcat 334 ................................CALL Bobcat 337D, A/C, HT ................$35,900 Bobcat 341 ..............Starting at $29,990 Bobcat 442 ....Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500 U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857 New Location: Farm-Rite Willmar 1515 West Litchfield Ave. • Willmar, MN 56201 320/235-3672 New Location: Farm-Rite of St. Cloud 810 Mayhew Lake Road N.E. • St. Cloud, MN 56304 844/262-2281

www.farmriteequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 11

NORTH DAKOTA Bismarck 701.250.4882 Fargo 701.271.2360 Minot 701.839.4020 W i l l i s to n 701.570.5309

GEORGIA Buford 678.318.9500 Savannah 912.964.8079

SOUTH CAROLINA Nor th Charleston 843.414.1120 Columbia 803.791.0740 Piedmont 864.704.1060

NORTH CAROLINA A sheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710

TENNESSEE Chattanooga 423.308.7940 Knoxville 865.525.1845

Some companies have you choose power or fuel efficiency. You chose both.

Volvo developed the industr y’s first fuel efficiency guarantee so you never have to compromise on per formance or productivity. And with CareTrack machine monitoring, you can focus your attention on more impor tant things — like growing your business. Get the details aatt volvoce.com/smartfuel.

ascvolvo.com

Page 12 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Modified Excavator Moves Product From Mighty Mississippi By Eric Olson CEG CORRESPONDENT

Every spring, the mighty Mississippi River is a busy thoroughfare of barges hauling all manner of goods up and down the waterway. As spring also is the time to get fertilizer to farmers for row-crop planting season, companies that move it are especially active during this part of the year. Wholesale fertilizer dealers and farmers throughout the Midwest and deep South depend on the river’s barges to keep them stocked with product. Hauling Efficiently For one company, River Bend Ag LLC in New Madrid, Mo., the need arose to improve the efficiency with which it unloaded fertilizer from barges at its dock on the Mississippi. River Bend Ag purchased a John Deere 470G excavator late last year from Erb Equipment in Cape Girardeau, Mo. The fertilizer wholesaler bought it with the express purpose of getting it converted from a construction machine into a material handler for unloading barges and moving the contents to its own warehouse. Deere manufactures the regular boom-and-stick found on its excavators, but for River Bend Ag’s purposes, a special material-handling front, or long front, was required — something Deere does not make in that size machine (a

long front includes an extended boom). A Dealer With a Solution Luckily, River Bend Ag and its since-retired manager, Ed Barnhill, turned the problem over to Beau Cotton, a salesman they had worked with at Erb Equipment. Cotton quickly came up with a solution. “They had an old material handler working on their barge for years” said Cotton. “One day last year, I had dropped in for a courtesy call and Eddie said ‘I'm glad you stopped by. We’re looking at replacing our material handler down there on the barge. Do you guys have anything like that?’ And I said, ‘Yes, we absolutely do.’” Calling in the Experts Cotton and the folks at Erb Equipment decided that the best company to help River Bend Ag get the material handling application it needed for its excavator was Pierce Pacific Manufacturing, one of the country’s top suppliers of attachments, work tools and machine conversions for a variety of excavators. “So I called Bob DeMeester, with Pierce Pacific, and he in turn went down to New Madrid and did a site-specific study for those guys, based on the machine they had, as well as the requirements of reach and weight capacity before putting together a nice report for them. We

The machine works on a floating barge, and unloads barges parked adjacent to it, and then fills a hopper to convey the material up the hill to storage.

The John Deere 470G excavator is pictured assembled, but not yet moved to the barge.

then quoted the machine that Bob had recommended, based on his study,” Cotton said. Pierce Pacific not only manufactures that specific long front with a clamshell bucket from scratch, but it sent some of its mechanics to Erb’s shop in Cape Girardeau to widen the undercarriage on River Bend Ag’s new excavator and add a counterweight to it in order to improve its stability for use on a barge. “The geometry of a materialhandling front is quite different than is the norm,” Cotton said. “Pierce Pacific put the cylinders in different places because you want the power on the raise of the stick rather than on the crowd of the stick like you would need on a regular excavator. That’s because when you are handling material you want to cast it away from you, not dig toward you.” Reliability Means Success The newly adapted Deere 470G is the lifeblood of River Bend Ag’s operation, a small, nine-employee company whose success is dependent on how well its equipment works. “We just have the one excavator that we use as a material handler on a barge, with the rest of our equipment being on-ground machines like front-end loaders,” said Josh Miller, River Bend Ag’s new president and general manager in the wake of Barnhill’s retirement. “Our whole business revolves around getting fertilizer moved in as efficient a way as possible. “Our Deere 470G sits out on a flat-top work barge and [river see EXCAVATOR page 101

“The geometry of a material-handling front is quite different than is the norm.” Beau Cotton Erb Equipment

River Bend Ag purchased a John Deere 470G excavator late last year from Erb Equipment in Cape Girardeau, Mo.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 13

Calll us tod day! Doug Mehner / Bryan Ganger

(866) 485-71 7180 ww ww.RBused.com

Celeb bratiing g our 30th Year!

2008 DEERE 350D LC, # 91704, CAB/AC, QC, HYD THUMB, 4500 HRS ........$189,500

1991 HITACHI EX270 LC, # 92162, HYD 2012 KOMATSU PC200 LC-8, # 82659, 4100 2010 KOMATSU PC350 LC-8, # 81711, THUMB, 10’2” STICK, 36” THUMB, AUX HRS................................................$139,500 CAB/AC, 10’6” ARM, KOMTRAX, REAR CAMERA, 2550 HRS ......................$229,500 HYD, 2900 HRS ..............................$49,500

2007 CAT D6T XL, # 81914, CAB/AC, 24” SHOES, 5700 HRS ........................$219,500

2007 DEERE 850J WLT, # 92030, CAB/AC, 24” TRACKS, PAT BLADE, SWEEPS, 4000 HRS................................................$159,500

2009 KOMATSU D51PX-22, # 81998, 2008 KOMATSU D65EX-15EO, # 81933, CAB/AC, PAT BLADE, REAR SCREEN, CAB/AC, 24” TRACKS, RIPPER, 5600 HRS .. KOMTRAX, 4300 HRS....................$124,500 ......................................................$149,500

2005 DEERE 310G, # 81652, CAB/AC, 4X4, AUX HYD, 1700 HRS ......................$49,500

2003 CASE 580M, #92344, CAB, 4X4, AUX HYD, 6800 HRS ..............................$26,500

2008 KOMATSU WB146-5, # 50988, 2003 KOMATSU WB140PS-2, # 50172, CAB/AC, 4X4, GP BKT, 2000 HRS ....$56,500 CAB/AC, 4X4, EXT-A-HOE, AUX HYD, 1300 HRS..................................................$49,500

1994 CAT 988F, #92284, EROPS, A/C, STEER S.T.I.C., AUTO SHIFT, ENGINE 2002 CAT 988G, # 92282, ROPS, JOYSTICK 2007 KOMATSU WA320-5, # 82063, ENCLOSURES, LIGHTING, 10,000 HRS ........ STEERING, 65/35-33 TIRES, 25,600 HRS .... CAB/AC, GP BKT, 3RD VALVE, 4450 HRS...... 2005 NEW HOLLAND W50B TC, #92353, ......................................................$129,500 ......................................................$136,500 ......................................................$119,750 CAB/AC, QC, AUX HYD, 3300 HRS ..$26,500

Page 14 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Titan Machinery Hosts Two Open Houses in Omaha, Duluth

itan Machinery held two open house events, one at its new Omaha, Neb., location on April 29 to celebrate the company’s move to its brand new dealership location, and one at its Duluth, Minn., location on May 5. Hundreds of customers came out to Omaha to celebrate, win door prizes and have lunch with the Titan team. In addition, guests checked out a backhoe with a Case/Toku hammer, which was demonstrated. A variety of vendors including Case Construction, JLG, Wacker Neuson, Werk Brau, Paladin, Toku, Leica, Toro, Side Dump’r, Sennebogen, K-Tec, CNH Capital, CNH Industrial, Atlas Copco and Fleetgard were there to support and help sponsor the event. Those attending were able to participate in a backhoe rodeo to show their machine operating skills. see TITAN page 24

Dee Lipker (L), Case Construction, parts and service sales manager and Patrick Altmann, Case territory manager, Farmington, Minn., stand with a Case CX160D excavator at the Duluth location.

Alan Voeltz (L), Wacker Neuson district manager, and Jeffrey Lefebvre, Titan Machinery field marketer, stand with the popular WL52 wheel loader at the Duluth location open house.

Approximately 200 customers attended the Titan Machinery open house at its Duluth location on May 5.

Ryan Schall, store manager, Titan Machinery, Duluth, showcases a pair of Case skid steer loaders — an SV185 and an SV300.

Bud McCollum (L), JLG representative, and Dustin Ronke, rental operations manager, Titan Machinery, Omaha, attend the event.

Gabriel Campbell (L), Waste Wood Recyclers, Duluth, Minn., just purchased this Case CX160 excavator, and will be converting it into a forestry unit for the company’s biomass production facility. With him is Justin Kangas, Titan Machinery, field service technician.

Erick Fronden, supervisor of the city of Duluth, gives this Case CX75 with thumb bucket a shot at the obstacle course set up in the demo area.

Chris Schroeder, trainee of Country Trucking and Excavating, Duluth, Minn., takes on the basketball challenge with this Case 580 TLB.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 15

JD 400D, 3446 Hrs, 40 Lull 944E-42, 9000lb, Ton, Tailgate, Warranty, 42’, 4x4, #98046............ #75552 ..........$298,000 ........................$61,000

JD 400D, 8000 Gallon JD 250GLC, 412 Hrs, JD 550K, LGP, 24” Pads, 124” Blade, 1406 Water Tank, #74752 ...... 11’10” Arm, 32” Pads, Hrs, Warranty, #96606 .. ......................$209,000 Warranty, #93858 .......... ......................$205,000 ......................$129,000

Bomag BW145PDB, 56” JD 670CH, Low Cab, Padfoot, Blade, #74693 Air, 12’ Blade, Ripper, ........................ $39,000 #93202 ............$93,000

JD 624K, 552 Hrs, Cab, JD 350GLC Material JD 85D, 6’ 11” Arm, Aux Handler, 1111 Hrs, Air, Hi Lift, GP Bkt, Hyd, #96938 ....$89,000 #95215 ..........$179,000 #52129 ..........$465,000

JD 310SJ, Cab, Air, JD 250D, Bed Liner, Tailgate, #98888............ 4x4, Ext Hoe, #98332 .. ......................$175,000 ........................$65,000

NPK Hammers, All Sizes for All Makes. Inspected and Well Maintained, GH4-GH18

JD 245GLC, 9’ 7” Arm, JD 755D, 22” Pads, GP 32” Pads, Hyd Thumb, 637 hours, #95039 .......... Bucket, 2532 hours, ........................$199,000 #98185 ..........$149,500

JD 9630 Scraper JD 850K, LGP, 36” JD 160DLC, 10’ 6” Arm, Tractor, Hi Flow, Pads, 152” Semi U 28” Pads, Hyd Thumb, Autoload, #95152 .......... Blade, #75189 $204,000 #94937 ..........$129,000 ......................$169,000

JD 544K, Cab, Air, High JD 650K, LGP, 128” Lift Boom, #98184 ........ PAT Blade, 28” Pads, #75728 ..........$138,000 ........................$119,000

Page 16 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

To See More Machines, Please visit us online at www.bobcat-ent.com Call Brad Kent at 513-266-7761 or on our USED EQUIPMENT HOTLINE: 888.BOBCATS

2013 S630 Bobcat Loader, 2125 Hrs, Cab Heat & Air, Power 2011 S750 Bobcat Loader, 3375 Hrs, Cab Heat & Air, Power 2013 E45 Bobcat Excavator, 1825 Hrs, Cab Heat & Air, Keyless, Long Arm, CN 93786 ......................................$44,500 Quick Tatch, Joysticks, CN 97585 ................................$34,500 Quick Tatch, Joysticks, CN 96939 ................................$35,000

2011 S770 Bobcat Loader, 1700 Hrs, Cab Heat & Air, 2 Speed, ACS Controls, CN 93400 ..................................$46,000

2013 T750 Bobcat Track Loader, 2620 Hrs, Cab Heat & Air, 2012 DL220 Doosan Wheel Loader, 600 Hrs, CN 84785 .......... 2014 DA30 Doosan Articulated Truck, 500 Hrs, CN 90330...... Roller Suspension, CN 96623 ......................................$44,000 ........................................................................................$123,500 ........................................................................................$328,800

2014 DX420LC-3 Doosan Excavator, 850 Hrs, CN 90363 ........ ........................................................................................$258,880

PRE-OWNED, JOB READY EQUIPMENT NOW AVAILABLE! Parts • Sales • Service • Rental • Training Cincinnati • Mt. Orab • Hilliard • Reynoldsburg • Lexington • Louisville

McCann to Host Open House Missouri, Arkansas… at Its Wauconda, Ill., Branch Underhill Joins CMW Equipment as Area Manager

McCann Industries Inc. will be hosting an open house at its Wauconda branch located at 1360 N. Rand Rd. Wauconda, Ill., on June 10 from 10 a.m. to 2 p.m. Hot lunch and refreshments will be served, and experts from Case, Takeuchi, Husqvarna, DeWalt and more will be on hand to answer any questions. To RSVP, call 630/6270000. For more information, visit mccannonline.com.

Like on

Dave Underhill has joined CMW Equipment Inc. as an area manager of Southeast Missouri. CMW Equipment Inc. is a construction equipment distributor selling concrete, asphalt and ready-mix equipment since 1956. Underhill has many years of successful sales of industrial equipment prior to joining the CMW team. He will be responsible for marketing the entire fleet of road construction equipment in southern Missouri and Arkansas. For more information, call 314/993-1336. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

The “It’s Only Another Beer” Black and Tan 8 oz. pilsner lager 8 oz. stout lager 1 frosty mug 1 icy road 1 pick-up truck 1 10-hour day 1 tired worker A few rounds with the guys Mix ingredients. Add 1 totalled vehicle. Never underestimate ‘just a few.’ Buzzed driving is drunk driving.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 17

Volvo Used Equipment Contact your local dealer:

2012 Volvo EC480DL CALL

2010 Volvo L350F CALL

2012 Volvo EC340DL $170,000

John Doe 123.456.7890 john.doe@dealer.com

2012 Volvo ECR58 $65,000 2012 Volvo A40F, 2999 Hrs............$500,000

Jane Doe 123.456.7890 jane.doe@dealer.com

Dealer Name City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890 Contact your local dealer: City, ST

Aring Equipment 123.456.7890 Company, Inc. 13001 City, STW. Silver Spring Drive Butler, WI 53007 123.456.7890 City,King ST Jim 123.456.7890 262.781.3770 Mobile: 414.530.0592 City, 262.781.5053 ST Fax: 123.456.7890 Email: jking@aring.com www.aringequipment.com

2011 Volvo DD138HF 2011 Volvo ECR28 $75,000 $34,500 2012 Volvo A40F, 2999 Hrs............$500,000

2012 Volvo A40F $405,000

A40 Finance leasing available for 24 months with payments as low as $7,800 per month. Call Doug Wilson for details.

Asphalt/Pavers/Concrete Equipment

Excavators – Wheeled

Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX 2012 A25F 2011 Volvo L220G Model,Volvo Hours ............................................................................... $XXX,XXX CALL $247,500 Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX

Excavators – Crawler Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX 2013 Volvo EC300DLR 2012 Volvo L250G Model, Hours ............................................................................... $XXX,XXX $220,000 $425,000

Motor Graders Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX

2014 Volvo L70G $165,000

DO NOT RUN COPY BELOW THIS RULE

DEALER LOGO

2012 Volvo A25F 2012 VolvoCALL A40F, 2999 Hrs............$500,000

1993 Volvo L150 $30,000

Page 18 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

RMS Customers Play in the Sandbox at Komatsu Demo

oad Machinery & Supplies Co. held a customer demo event on May 9 at the Extreme Sandbox in Hastings, Minn., to showcase the newly introduced Komatsu PC490LCi-11. This intelligent machine features Komatsu’s machine control and guidance system, fully factory integrated with the other qualities of the standard Komatsu PC490LC-11 excavator. The exclusive control function allows contractors to move material efficiently, without having to worry about digging too deep or damaging the target surface. From rough digging to finish grading, the PC490LCi11 excavator improves efficiency and precision. Customers were able to operate the machine to see and feel the machine control in action as well as learn about Komatsu’s Tier IV Final engine technology, KOMTRAX machine monitoring system, and Komatsu’s Tier IV PM maintenance program, Komatsu CARE. The PC490LCi-11 is the latest Komatsu intelligent machine to be released, which follows the PC210LCi-10 excavator, and the intelligent dozer models D39, D51, D61, D65 and D155. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG (L-R): Gordon Johnson and Tom Major, RMS territory managers, and Jeff Borass, RMS finance and credit manager stand with this Komatsu WA 270 wheel loader.

Road Machinery & Supplies Co. held a customer demo event at the Extreme Sandbox in Hastings, Minn. Customers were able to operate the machine to see and feel the machine control in action as well as learn about Komatsu’s Tier IV Final engine technology, KOMTRAX machine monitoring system, and Komatsu’s Tier IV PM maintenance program, Komatsu CARE.

(L-R): Dave Johnson, Road Machinery & Supplies CFO; Mike Gidaspow, sales and marketing director, Midwest region of Komatsu America Corp.; and Shreyas Patel, regional sales manager of Komatsu America Corp., stand with a 490Lci Komatsu excavator.

Chris Potter, Road Machinery & Supplies, technical solutions expert, guides attendees working the machines through the wireless support system.

Road Machinery & Supplies Co. held a customer demo event at the Extreme Sandbox in Hastings, Minn., to showcase the newly introduced Komatsu PC490LCi-11.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 19

.com

2011 CATERPILLAR CS76, ID# HUC0242, SN# CYX00780, 872 HOURS ............................................$119,500

2006 CATERPILLAR RM300, ID# HUC0122, SN# BWR00270, 2695 HOURS ........................................$199,900

2007 CATERPILLAR D6TXL, ID# NUC0388, SN# LAY00588, 8905 HOURS ..........................................$135,700

2010 CATERPILLAR 950H, ID# HIC0182, SN# K5K03057, 4310 HOURS ..........................................$144,900

2014 CATERPILLAR 299D, ID# HUC0327, SN# GTC00475, 1257 HOURS ............................................$65,200

2012 CATERPILLAR TL943C, ID# HUC0216, S/N# THH00262, 1300 HOURS ................................$76,000

2009 CATERPILLAR 140M, ID# HUC0120, S/N B9D01948, 4265 HOURS ..........................................$159,600

2012 CATERPILLAR 236B3, ID# HUC0367, SN# A9H02584, 475 HOURS ..............................................$26,500

2008 CATERPILLAR 120M, ID# HUC181, SN# B9N00183, 4290 HOURS ..........................................$119,400

2010 CATERPILLAR 980H, ID# HUC0175, SN# JMS05820, 7637 HOURS ............................................$229,900

2012 CATERPILLAR 627H, ID# HUC0287, S/N# DBW00218, 6270 HOURS ........................................$515,500

2014 CATERPILLAR 242D, ID# PUC0048, SN# DZT00531, 21 HOURS ................................................$43,700

1999 CATERPILLAR 301.5, ID# PUC0040, SN# 3YW01250, 1486 HOURS ..................................$10,400

2011 CATERPILLAR 303.5DCR, ID# HUC0301, S/N# RHP01021, 1280 HOURS, CAB, A/C ........................$38,600

2014 CATERPILLAR 299D, ID# HUC0281, SN# GTC01208, 772 HOURS ..............................................$73,900

2012 CATERPILLAR 236B3, ID# HUC0367, SN# A9H02584, 474 HOURS ..............................................$26,500

Kansas City (844) 845-8814 • Wichita (866) 773-5581 • ContactUs@FoleyEQ.com • (316) 943-4211 International

Page 20 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Stowers Machinery Hosts 2016 Machine Demo Day

The Cat 299D2 track loader is equipped with the automatic laser-guided grade box from Level Best.

towers Machinery held its 2016 Machine Demo Day on April 29 at its East Knoxville location. More than 500 people attended the event. The demo day proved to be a great opportunity for Stowers to demonstrate how to use machine technology, equipment management technology, and job site technology. Screen Machine Industries, an American manufacturer of portable crushing and screening plants, trommels and stacking conveyors, held live demonstrations throughout the day (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG see STOWERS page 98

Stowers Machinery held its 2016 Machine Demo Day on April 29 at its East Knoxville location.

(L-R): John Thornton and Clarence Howard, both of Thunder Enterprises in Chattanooga, look over the newly introduced Cat 745C and 730C articulated trucks with the help of Wes Reece of Stowers Machinery.

Larry Garner (L) of Blount Excavating shares a laugh with Todd Quigg of Harrison Construction.

(L-R): David Fields, Stowers Machinery; Jason, Brack and Tucker Robertson, all of Southern Construction in Athens, Tenn.; David Kerr of Stowers Machinery; and David Holland, also of Southern Construction, enjoy their day at the event.

Chuck Haynes (L) of C&K Equipment in Knoxville receives a warm welcome to the event by Wes Stowers of Stowers Machinery.

The Cat 305.5E2 equipped with the Trimble GCS Flex allows the operator to dig to depth and slope while seeing it on the monitor.

Jeff Williams (L) of Screen Machine Industries goes over the products with Matthew Wallen of Short Mountain Silica in Rogersville, Tenn.

Tyler Davis (L) of Vic Davis Construction in Kingsport, Tenn., and LaVergne Pabian of Screen Machine Industries, attend the demo day event.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 21

nths* 0% for 48 Maosh in lieu.

0C or up to $3,50

YOUR VISION.

BUILT TO SPEC.

Building your construction business together. You have pretty clear ideas about the equipment you need to succeed. So we used them as a blueprint for our E-Series Skid Steers and CTLs. You ZDQWHG PRUH IRRW URRP :H DFKLHYHG LW E\ PDNLQJ WKH ƠRRUV ƠDW <RX ZDQWHG PRUH KRUVHSRZHU We upped it by 10 percent on our large-frame models. You wanted switchable controls. We offer selectable ISO, H-pattern, and foot controls on all models. You wanted easier attachment hookup. We hooked you up. To learn more, see your dealer or visit our website.

*Offer valid at participating dealers only. Offer valid starting March 1, 2016 until June 30, 2016. Subject to approved installment credit with John Deere Financial. Offer includes new John Deere skid steers, compact track loaders, and compact excavators. Some restrictions apply. 0% APR for 42 months is available on new John Deere compact loaders. Other offers available. See your local John Deere dealer for complete details and other financing options.

Burnsville, MN 952-890-8880

Sauk Rapids, MN 320-259-6222

Grand Forks, ND 701-772-4842

Aberdeen, SD 605-225-6772

Rochester, MN 507-282-8888

Moorhead, MN 701-526-2200

Minot, ND 701-852-3962

Sioux Falls, SD 605-336-2730

North Mankato, MN 507-387-1836

Bismarck, ND 701-223-5798

Williston, ND 701-577-0736

Rapid City, SD 605-348-1566

Marshall, MN 507-532-0994

Dickinson, ND 701-483-0115 www.rdoequipment.com

Minnesota Equipment Rogers, MN 763-428-4107 Minnesota Equipment Isanti, MN Jesse Kraft 763-444-8873 www.MinnesotaEquipment.com

Page 22 â&#x20AC;˘ May 21, 2016 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

563-872-4112

(DUBUQUE) BELLEVUE, ELLEVUE, IOWA

WWW.JJSCHECKEL.COM

CLEAN, WORK-READY EQUIPMENT IN IOWA - WE OWN WHAT WE ADVERTISE! RENTOR

RENTOR

BUY!

â&#x20AC;&#x2DC;07 SMI 4043T CRUSHER - $215,000 (3) CAT D10Tâ&#x20AC;&#x2122;s - $245,000 5,000 EACH Mobile TTrack rack Moun Mounted ted Impac Impact p t CCrusher, rusher err, 4,900 Hrs Hrs,, 2006 & 2009 Cat Cat D10T D10Tâ&#x20AC;&#x2122;s, â&#x20AC;&#x2122;s, RRJG JG series series,, LLow ow hhr ccomponent omponen p t 300 TPH, Completely Completely rrefurbished. efurbished f b h . Remote Remote Control. Control. hist history, ory,y, EErops, rops p , U BBlade lade w/ ttwin win tilt tilt,, Rippers, Rippers pp , VVery ery good good, d, Side Side stacker stacker & magnet options. options. Rent/Lease Rent/Lease or Buy. Buyy.. clean l ccondition, ondition, all from from same originall oowner. wner. OR OR O R

RENT

BUY!

RENT

BUY!

2008 Deere 700J LGP - $78,000 2012 CAT D6N LGP - $ $160,000 160,000 3,800 HHours, ours, GPS AAccugrade ccugr g ade rready. eadyy. EErops, rops ps, SSweeps, weeps, A/C, 4,100 HHours, machine. ours, EErops, rops p , OOne ne oowner wner black dir dirtt machine. DDiff iff st eerr, AAux ux hhydraulics, ydraulics li , Rear dr ddrawbar, awbar b r,, CCat at SSystem yystem 1 steer, Buy. SSuper uper clean, NNone one nic nicer. er. RRent/Lease ent/Lease or Buy. UC, 1 OOwner, wnerr, Ex cellent ccondition. ondition. RRent/Lease ent/Lease or Buy y.. Excellent Buy.

RENTOR

BUY!

2012 CAT D6T LGP VPAT - $184,000 3,020 HHours,Cat ours,Cat hea heavy vy dutyy sstandard standard UC, Accugrade Accugr g ade bl d , Diff GPS rready, eadyy, Pat Pat 6 way way blade, blade Diffff steer, steerr, Rear drawbar drawbar w/counterweight. Buy.. w/c ounterweight. OOne ne oowner. wner err. RRent/Lease ent/Lease or Buy OR

RENT

BUY!

$142 2012 CAT 320EL - $142,000 2012 2012 Komatsu PC360LCPC360LC-10 10 - $ $165,000 165,,000 rear view 2,200 Hours, Hours, 46â&#x20AC;?â&#x20AC;? bucket, bbuckket, 9â&#x20AC;&#x2122;6â&#x20AC;?â&#x20AC;? stick, stickk, A/C, rear 4,700 Hours, Hours, OOne ne oowner, wnerr, OOriginal rigin g nal pain ppaint,t, AAllll the h camera, Aux Aux hydraulics hydraulics available, available, Very Very nice nic n e machine, machine, options! Hydraulic camera, Hyydraulic thumb thumb,, QQuick uickk ccoupler, o pl r,, 53â&#x20AC;?â&#x20AC;? BBucket. oupler ucket. Fully Fully serviced, serviced, Excellent Excellent condition. condition. Rent/Lease Rent//L / ease or Buy. Buy. Extra EExtra clean! Rent/Lease Rent/Leasee or BBuy Buy. y..

2001 CAT 777D D - $280,000 Fully Fully lly reburbished. reburbished b b h d. $100,000 $$1000,000 spent. spent. Very Very goodd tires, tiri es, details andd pictures ppicictures on our website. websit b e. Nice truckk, Rent/Lease Rent/L Buyy.. NNice truck, /LLease or Buy.

BUY!

, 2012 CAT D6T LGP VPAT - $178,000 2011 CAT D6T XW VPAT - $164,000 5,600 hrs hrs, h , SSystem yystem 1 UC, CCat at AAccugrade ccugr g ade d GPS Ready Ready. d. ccugr g ade 3,600 HHours,Cat ours,Cat hea vy dutyy standar heavy standardd UC, AAccugrade VPat at blade blade,, Rear W Winch, inch, FFull ull OOptions, ptions, EExcellent Excellen wnerr, ll t 1 oowner, Diffff steer, GPS rready, eadyyy,, Pat Pat 6 way way blade, blade d , Diff steerr, Rear drawbar. drawbar.. VP Original O riginal condition c ondition machine. machine . Rent/Lease R ent/L ease or Buy OOne ne oowner wner machine supper clean. Rent/Lease Rent/Lease or Buy. Buy. machine,, super OR OR

RENT

BUY!

2011 CAT 349E 349EL EL - $225,000 ours, OOriginal riginall pain ppaint,t, 1 OOwner, wnerr, QQuick uickk coupler, coupler p r,, 4,600 HHours, SService ervice hist history, ory,y, VVery ery clean l n and str straight aigh g t machine hi frfrom om goodd home ennt/L /Lease or Buy home.. RRent/Lease Buy..

RENTOR

2011 CAT 33 336EL 36EL - $200,000 Hrs, Original Original g l paint, pa paint, 1 Owner, Ownerr, Service Service history, 1,900 Hrs, hhistoryy,, Very Very clean andd straight straigh ight machine from from good g home. home. Best price prici e in maarket. Rent/Lease Rent/LLease or Buy. Buyy.. Best i the h market. OR

RENT

BUY!

2011 CAT AT 324EL - $155,000 OOnly nly ly 2,100 hhrs. hrs. FFully ully uxiliar yddraulics lly lloaded loaded, d d, AAuxiliary l y hhy hydraulics. l . QQuick uick i k coupler. coupler pl r. 9â&#x20AC;&#x2122;9â&#x20AC;?â&#x20AC;? stick stick, ti k, longg and wide idd UC. Extra clean, single wner! RRent/Lease ent/L Extra i gle oowner! /Lease or Buy Buy.. OR

RENT

BUY!

(2) 2011 CAT 740Bâ&#x20AC;&#x2122;s 40Bâ&#x20AC;&#x2122;s - $210,000 , EA. (3) 2006 CAT AT 740â&#x20AC;&#x2122;s - $138,000 , EA. 6,900 hours hours. h . BBoth othh bbough bought ght new ttogether. ogether g h r.. B1P B P Series. Series. All All 3 bbought bough ght new ttogether. ogether g h . FFull ull ser vice hist OOne ne oowner, wnerr, OOriginal riginal g pai paint, p int, Good rubberr. Fully Fully lly loaded. lloaded. service history, ory,y, Good rubberr. Fully Fully loaded Goodd rubber. Goodd rubber. lly loaded. l d . SSolid olid machines Nicee clean pairi rready Nic eady d to to go. go. Rent/Lease Rent/Lease or Buy. Buy. machines,, rready eady d ttoo go go.. Rent/Lease Rent/LLease or Buy. Buyy..

RENTOR

BUY!

USED AND RECONDITIONED PARTS HOTLINE

BUY!

2012 CAT 980K K - $155,000 (3) 2001 CAT 627Gâ&#x20AC;&#x2122;s - $195,000 $195,000 EA. ((3)) CAT 631P PULL SCRAPERS S ame hours, hours h , 4,200 were were idle. idle dl . Matching Matching h g Titan Titan Pushh pull All 3 bought bbough Push p ll scrapers. scrapers p . All ght new together. together g h . NEW CONVERSIONS - $ $65,000 $6 65,000 EACH 13,500 ffrframe LD250 T Tires. ir es . 7 Yard Y ar d GP straight str aigh t edge g bucket. bucket. TTA2 A2 tested. tested. CClean, lean, one oowner wner machines!! GGood oodd 33.25+29 33.255+29 29 rubber. rubber. b . CCAT AT 631C SScrapers crapers p cconverted onverted ttoo PPull, ull, 30 yyard ard ccapacity. apacit p y. O Original riginal pain paint, t , original owner. o wner r . Clean C lean l & straight str t aigh t machine. machine . Rent/Lease or Buy y.. Rent/Lease Buy. Refurbished as needed, needed ydraulicic ccylinders ylinders rrebuilt. ebuilt d , all hhydraulic l b l.

2006 CAT C CS563E S563E - $58,000 , Original Original g l paint. pain p t. 84â&#x20AC;? 84â&#x20AC;? Vibratory Vibr b atory smoothh drum. drum. Enclosed Enclosedd cab, cabb, A/C A/ + hea heat,t, Very Very well wellll main maintained. i ttained. 4,500 Hours. Hours. Rent/Lease Rent/Lease or Buy. Buyy..

G enuine OEM C at Genuine Cat Full aavailability vailability of used CAT CAT par p ts, Full parts, 50% off list riers, housings h , list,, car carriers, housings, gears c. gears,, et etc. A lso huge selection selec election of aattachments ttachments Also and d ccomponents omponents in st ock. stock. If we we don â&#x20AC;&#x2122;t ha ve it, it, we we will find it! If donâ&#x20AC;&#x2122;t have Parts locating locating ser vice. Parts service. Call Call Matt Meyer Meyer 563-872-4112

VISIT OUR WEBSITE FOR DETAILED PHOTOS AND DESCRIPTIONS! WWW.JJSCHECKEL.COM The highest quality, most complete, most detailed, proprietary reman program in the world! SSR SCHECKEL SERIES REMAN MACHINES S IN PROGRESS NOW! Â&#x2DC; jEk 11R 7P Â&#x2DC; jEk 11R 7PZ Z Series Series Â&#x2DC; jFk 10Râ&#x20AC;&#x2122;s Â&#x2DC; jFk 10Râ&#x20AC;&#x2122;s AK AKTT SSeries eries Â&#x2DC; jFk M 5 Â&#x2DC; jFk M 5 7TL & ABK Series Series We We also perform perform Cat Cat 777D, 777D D,, Cat Cat 992 D/G & Cat Cat 16 G/H Remans Remans on a regular regular basis. basis. C Custom ustom builds performed performed tto o meet meet customerâ&#x20AC;&#x2122;s customerâ&#x20AC;&#x2122;s exact exa act requirements, requirementss, specs, specs, and and budgets. budgets. Call Call 563-872-4112 or ema emailil sales@jjscheckel.com sales@jjjsche jscheckell.com for a brochure! brochure!

J.J. SCHECKEL RENTS

No Borders, No Boundaries. Partner with us! Your source for Nationwide Rentals:

Â&#x2DC; EX GX 14 J 106* 1064#%65X #6 Â&#x2DC; EX GX 14 J 106* 1064#%65X #6 Discounted Discounte d Rent Rates Rates '06 74%*#5' 26+105X 9+6* ENNÂ&#x2020; Â&#x2DC;Â&#x2DC; '06 74%*#5' 26+105X 9+6* ENNÂ&#x2020; FFinancing inancing Â&#x2DC;Â&#x2DC; *146 14 10) '4/ '#5'5 *146 14 10) '4/ '#5'5 Â&#x2DC;Â&#x2DC; ' #-' +6 61 '06 (41/ 75 ' #-' +6 61 '06 (41/ 75 Quick Q uick Mobilization - D Delivered elivered to to yyour our sit site, e, set up, up p, and and ready read dy tto o go. go. Cost Cost Efficient, Efficientt, Expa Expand nd d yyour our capabilities capabilities with our equipment! equipment!

Ph: 563-872-4112 | Fax: 563-872-5058 | sales@jjscheckel.com sales@jjscheck s el.com | 21582 Hwy 62,, Bellevue, Bellevue, Iowa Iowa 52031 | www.jjscheckel.com www w w.jjscheck .jjscheckel.com

constRuction eQuiPment guide • www.constructionequipmentguide.com • may 21, 2016 • Page 23

coRPoRate HQ

elmHuRst

Joliet

oglesby

RockfoRd

Hammond

635 W. Lake Street eLMhurSt, iL 60126

16822 W. LaraWay rd. JoLiet, iL 60433

590 Mayer St. ogLeSby, iL 61348

5055 South Main St. rockford, iL 61102

6400 indianapoLiS bLvd haMMond, in 46320

call bobby falcone 630-516-4456 www.pattencat.com

USED EQUIPMENT SPECIALS

2007 CAT 328D TRACK EXCAVATOR SER#: GTN00200 $122,500

2013 CAT 336EL TRACK EXCAVATOR SER#: FJH00435 $275,000

2012 CAT 12M2 MOTOR GRADER SER#: F9M00102 $277,500

AC/HEAT, AUX HYD, QUICK COUPLER, STRAIGHT TRAVEL PEDAL

ROPS, ENCLOSED CAB, GRADE CONTROL, AC

EROPS, AC/HEAT, 2-SPD, STD FLOW, Q-COUPLER

2006 CAT 277B MULTI TERRAIN LOADER SER#: MDH03980 $16,900

2010 CAT 320DL TRACK EXCAVATOR SER#: SPN00292 $152,000

2008 CAT 314CL HMR TRACK EXCAVATOR SER#: PCA01885 $79,900

2014 CAT 950K WHEEL LOADER SER#: R4A02045 $220,000

OROPS, STANDARD FLOW, QUICK COUPLER, BUCKET

AC/HEAT, LONG REACH ATTACHMENT, STRAIGHT TRAVEL PEDAL

AC/HEAT, AUX HYD, 9’10” STICK, QC, 24” TRACK

AC/HEAT, RIDE CONTROL, Q-COUPLER, GP-BUCKET; 4.24 CYD, RADIO

2001 CAT 315CL TRACK EXCAVATOR SER# CFT00438 $47,000

2013 CAT 289C2 2AIH MULTITERRAIN LOADER SER# RTD01875 $46,000

2014 CAT 259D 2AIH MULTITERRAIN LOADER SN# FTL02591 $59,000

2013 CAT 289C2 2AIH MULTI TERRAIN LOADER SER# RTD01266 $59,500

AC/HEAT, STRAIGHT TRAVEL PEDAL, 10’2” STICK 28” TRACK

AC/HEAT, Q-COUPLER, 2-SPD, AUX HYD, STANDARD FLOW

ENCLOSED CAB, AC/HEAT, QUICK COUPLER, 2 SPEED RIDE CONTROL, AUX HYDRAULICS

EROPS, AC/HEAT, STD FLOW, AUX HYD, 2-SPD, RADIO

AC/HEAT, Q-COUPLER, AUX HYD, CMB HYD LINES, RADIO

2013 CAT 289C2 2AIH MULTI TERRAIN LAODER SER#: RTD01268 $59,500

2012 CAT D6T LVTARO SER# KSB01195 $195,000

1997 CAT D6R TRACK TYPR TRACTOR SER#: 9PN00643 $52,500

AC/HEAT, S BLADE, ACUGRADE READY

17854 HOURS, EROPS, BLADE; S, SINGLE ANGLE TILT, TOPCON CONTROLS

VISIT

WWW.PATTENCAT.COM

FOR OUR MOST CURRENT INVENTORY LISTINGS.

Page 24 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Case 580SL, 6870 Hrs, 82” Bkt w/Cutting Edge, stk# P09881 $29,900

Case 580L, 7372 Hrs, OROPS, 4 Stick Controls, stk# P09579 $21,300

Case 580SL, 6422 Hrs, 4x4 w/18” Bkt, Stk# P08418 $23,000

2012 Case SR175, 1335 Hrs, OROPS, H Pattern Controls, Stk# P07497 $32,000

Case 70XT SSL, 2700 Hrs, OROPS, H Pattern Pilot Controls, Stk# P09546 $22,500

2007 Case Construction 580SM III, 3944 Hrs, Stk# P06371 $59,000

Case TR270 CTL, 478 Hrs, Tier 4 Final, 72” Bkt, Cab w/Heat & A/C, Stk# P09381 $44,700

2013 Case 580SN, 401 Hrs, Cab, A/C, 4x4, Extendahoe, Stk# P05875 $93,200

Hundreds of Customers Celebrate New Omaha Location TITAN from page 14

Omaha prize winners: • Poker run winner — Luke Bostwick, city of Blair • Backhoe rodeo winner — Bob Fox, Fox Machine Shop • Door prize winners — John Otte, city of Blair; Alen Ayler, city of Plattsmouth; Jim Bloom, city of Walnut; Allen Olson, Olson Contracting; Gary Wurtz, Wurtz Cattle Co.; Greg Armstrong, Swain Construction Approximately 200 customers attended the Titan Machinery open house at its Duluth location on May 5. The event featured an equipment skills competition, prize giveaways and a free lunch. Manufacturer representatives were on site along with Titan employees to answer questions and explain the features of the equipment on-hand. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG Chris Stevenson gave this CX55B a shot as her husband Carl Stevenson of Duluth, Minn., looks on.

Lunch was served at Titan Machinery’s Duluth location open house.

Titan Machinery held two open house events, one at its new Omaha location on April 29 to celebrate the company’s move to its brand new dealership location.

Jamey Baumgartner (L) of Country Truck and Excavating, Duluth Minn., talks with Mike Werman, Titan Machinery, machine control specialist, about the advantages of using the Leica GPS systems in multiple applications.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 25

www.liugongna.com T O U G H W O R L D . T O U G H E Q U I P M E N T. We make one of the broadest lines of construction, mining, road building and material handling equipment in the world. All

EVERY JOB. EVERYWHERE.

backed by top-notch warranty, training, parts and service support. Contact your local dealer today for more information...

MidWest Ready Mix & Equipment 1405 East Highway 50 • Vermillion, SD 57069 605-638-0897 www.buyaloader.com

Page 26 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Farm-Rite Event in Dassel Draws Nearly 600 Attendees

F (L-R): Tim Krahn, Bobcat district manager, and Rylin and Curt Rischmiller of Winsted, Minn., inspect this Bobcat MT85. (L-R): Tom Cox, service manager and owner, talks with David Cox, salesman of the year, in front of a Bobcat T870 with a brush cutter and a Bobcat A770 with a stump grinder.

arm-Rite held an open house at its Dassel, Minn., location on April 23. The event drew nearly 600 attendees, which featured door prizes, lunch and demonstrations. Tim and Tom Cox as well as the rest of the Farm-Rite family welcomed their guests. “This gives us a chance to see everyone and say thank you for their business, and have a little fun while doing it.” said Tim Cox, owner. The branch is located at 901 Parker Ave. W, Dassel, Minn. 55325. For more information, call 320/ 2752737. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

Tim Cox (L), service manager and owner of Farm-Rite Equipment, welcomes Nick Mares of Nick Mares Excavating, Annandale, Minn., to the open house.

Bob Pace, sales representative of Towmaster Trailers, Litchfield, Minn., shows Fritz Lukes a T5HD dump trailer for his business, Midwest Windows in Lester Prairie, Minn.

(L-R): Rich Yurczyk, Avon, Minn., picks up a copy of Construction Equipment Guide and stands with Dave Kroll, Holdingforth, Minn., and George Larson of Litchfield, Minn., in front of this restored 1958 M400 Melroe, the predecessor to the modern Bobcat. The event drew nearly 600 attendees, which featured door prizes, lunch and demonstrations.

Ed Lang of Heavy Haul Transport, Paynesville, Minn., runs this Bobcat E32 excavator in the demo area.

Rick (L), Annandale, Minn., and Craig Seidenkranz, Oakdale, Minn., stand with their Farm-Rite sponsored Sprint Car.

Dan and Hannah Smock give this T550 a try.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 27

Mid Country Machinery (800) 206-5936

3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302 4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710 106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470

www.midcountrymachinery.com

2012 DEERE 850 KWT

2012 VOLVO L50G

2006 KOMATSU WA250

DOZERS

EXCAVATORS

SKID LOADERS

2013 CAT D6T LGP, 1639 hrs ......................................$255,000 2013 DEERE 650K XLT, 1953 hrs ..................................$89,000 2013 DEERE 550K XLT, 1310 hrs ..................................$99,500 2012 CAT D6K LGP, 4318 hrs......................................$109,000 2012 CAT D5K LGP II, 1802 hrs ......................................$CALL 2012 DEERE 850KWT, 1368 hrs ..................................$210,000 2011 CAT D6T XL, 2625 hrs ........................................$189,000 2011 CAT D6T LGP, 3065 hrs ......................................$189,000 2011 CAT D3K XL, 591 hrs............................................$95,000 2011 CAT D3K LGP, 976 hrs..........................................$75,000 2008 CAT D6T XL, 4731 hrs ........................................$165,000 2008 CAT D6T XL, 5452 hrs ........................................$135,000 2008 CAT D6T XW, 8081 hrs ......................................$135,000 2007 CAT D8T, 4757 hrs ..................................................$CALL 2007 CAT D6T XL, 3248 hrs ........................................$157,500 2006 CAT D6R XL, 7226 hrs........................................$142,500 2004 CAT D6R XWII, 12995 hrs ....................................$95,000 2003 CAT D8R II, 10806 hrs........................................$180,000 1998 CAT D6M XL, 7824 hrs ........................................$53,500 1987 CAT D4B ..................................................................$CALL

2016 LBX 210X3EX, 80 hrs ..............................................$CALL 2016 LBX 145X3DZ, 5 hrs................................................$CALL 2015 LBX 160X3, 76 hrs ..................................................$CALL 2015 LBX 145X3DZ, 112 hrs............................................$CALL 2015 KOB SK210LC, 285 hrs ..........................................$CALL 2015 KOB SK140SR, 65 hrs ............................................$CALL 2014 KOB SK140SR, 637 hrs ......................................$117,500 2013 KOB SK295LR, 1000 hrs ....................................$205,000 2013 KOB SK260LR, 844 hrs ......................................$195,000 2013 SANY SY135C, 558 hrs ........................................$82,000 2012 KOB SK260LC, 1095 hrs ....................................$165,000 2012 KOB SK210LC, 1042 hrs ....................................$117,500 2012 CAT 336EL, 3968 hrs ..............................................$CALL 2012 CAT 320EL, 2882 hrs..........................................$115,000 2012 CASE CX210B, 1630 hrs ....................................$115,000 2012 KOB SK140SR, 953 hrs ......................................$115,000 2012 KOMATSU PC138..................................................$99,500 2006 CAT 325DL, 5824 hrs ..............................................$CALL 2005 KOB SK290LR ......................................................$75,000 2005 KOB SK160LC, 2402 hrs ......................................$69,000 2004 KOB SK70SR, 7824 hrs ..........................................$CALL 2004 CAT 320CL, 7679 hrs ..............................................$CALL 2002 DEERE 270C, 9307 hrs ........................................$55,000 1998 KOMATSU PC220..................................................$29,000 1984 CAT 225 ..................................................................$CALL 1978 CAT 225, 1534 hrs................................................$18,000

2015 BOBCAT T770, 137 hrs ........................................$69,000 2015 BOBCAT T550, 100 hrs ........................................$49,000 2014 KUBOTA SLV902, 223 hrs ......................................$CALL 2014 CAT 252B3, 324 hrs..............................................$39,500 2012CAT 287C, 1058 hrs ..............................................$53,500 2012 CAT 252B3, 400 hrs..............................................$39,500 2012 CAT 226B3, 921 hrs..............................................$24,000 2011 CAT 226B3, 432 hrs..............................................$28,000

MINI EXCAVATORS 2016 KOB SK35SR, 132 hrs ..........................................$50,000 2015 KOB SK55SRX, 126 hrs........................................$57,500 2015 KOB SK35SR, 235 hrs ..........................................$41,000 2015 CAT 308ECR..........................................................$99,000 2014 KOB SK35SR, 294 hrs ..........................................$36,000 2014 KOB SK17SR, 229 hrs ..........................................$24,000 2014 SANY SY75C, 465 hrs ..........................................$63,000 2013 KOB SK35SR, 411 hrs ..........................................$38,000 2013 KOB SK27SR, 227 hrs ..........................................$28,500 2013 CAT 308E CR, 1006 hrs ........................................$75,000 2012 KOB SK35SR, 47 hrs ............................................$37,500 2012 BOBCAT E50, 868 hrs ..........................................$49,500 2012 CAT 305ECR, 1238 hrs ........................................$51,000

LOADERS 2015 KAW 80Z7, 65 hrs ..................................................$CALL 2015 KAW 70Z7, 343 hrs ................................................$CALL 2015 KAW 67Z7, 143 hrs ................................................$CALL 2014 KAW 80Z7, 461 hrs ............................................$197,000 2014 KAW 80Z7, 843 hrs ............................................$165,000 2014 KAW 70Z7, 700 hrs ............................................$153,000 2013 KAW 60ZV2, 2516 hrs ..........................................$79,500 2013 CAT 930K, 993 hrs..............................................$130,000 2012 CAT 930H, 1482 hrs ..........................................$112,500 2012 CAT 950K, 3634 hrs............................................$175,000 2012 CAT 950K, 8460 hrs............................................$107,000 2012 DEERE 624K, 924 hrs ........................................$137,500 2012 VOLVO L50G, 1000 hrs ........................................$83,000 2011 CAT 908H, 2334 hrs ............................................$52,500 2010 CAT 924H, 1494 hrs ..........................................$102,000 2008 KAW 90ZV2, 12509 hrs ........................................$79,500 2006 KAW 90ZV2, 8100 hrs ........................................$110,000 2006 KOMATSU WA250, 5223 hrs ................................$82,000 1999 CAT 980G, 28709 hrs ..........................................$85,000

BACKHOES 2014 DEERE 310SK, 500 hrs ........................................$89,000 2012 NH B95C, 1001 hrs ..............................................$63,000 2011 JCB 3C-14, 480 hrs ..............................................$55,000 2008 CAT 420E, 1794 hrs..............................................$62,000 2004 DEERE 310SG, 5377 hrs ........................................$CALL 2001 DEERE 410G, 7871 hrs ........................................$17,000 1998 NH 575E, 3177 hrs ..............................................$23,000 1993 DEERE 310D, 6448 hrs............................................$CALL 1990 CAT 446B, 7722 hrs..............................................$22,000

COMPACTORS 2015 DYNA CA2500PD, 200 hrs....................................$93,000 2015 DYNA CA2500D, 150 hrs......................................$89,000 2015 DYNA CA1500D, 63 hrs........................................$75,000 2014 DYNA CA2500D, 256 hrs......................................$89,000 2012 CAT CS76, 1464 hrs ..........................................$115,000 2007 IR SD116F, 1102 hrs ............................................$78,000 2006 CAT CS423E, 2830 hrs ........................................$49,000 2004 CAT CS423E, 3013 hrs ........................................$49,000 1998 HYPAC C850B, 205 hrs ........................................$19,500

Page 28 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Columbus Equipment Company Celebrates New Facility

olumbus Equipment Company held a grand opening event on May 9 at the dealership’s new Columbus, Ohio, facility. Established in 1952, the company has moved to the new facility from its previous location in Columbus, which the company has operated in since first opening its doors for business. The new facility will serve as the company headquarters and one-stop location serving construction, paving, mining, aggregate, lifting and forestry equipment customers with a larger inventory, more extensive rental fleet and improved service capacity to handle increased demand for parts and service. Attendees of the grand opening were treated to lunch and given impromptu tours of the new facility located at 2329 Performance Way in Columbus. The new 35,000 sq. ft. (3,251 sq m) branch sits on 24 acres. Initially, there were three structures on the property, and Columbus Equipment Company added a fourth, the main building, which was designed to meet the company’s needs. The new building includes administrative office space, a main reception area, and a fully outfitted eight bay service area plus a wash bay and bulk oil storage room. The 12,500 sq. ft. (1,161 sq m) parts warehouse, also contained within the main structure, features 30 ft. (9.1 m) high racking accessible by use of Hyster Reach truck fork lifts with a wire-line guidance system to maintain safe passage and operation.

(L-R): Steve Scott and Darrell Drone, both of Columbus Equipment Company, catch up with Travis Potts of George J. Igel & Co. Inc.

Columbus Equipment Company personnel were on hand to greet and talk with customers, and manufacturer representatives from several of the company’s product lines also helped to hand out door prizes and meet with attendees at the event. Supplying a comprehensive range of heavy equipment-related products and services, the company provides a highquality product offering featuring, but not limited to, the following brands: Komatsu, Link-Belt, Roadtec, Morbark, Eagle Crusher and McCloskey International.

Columbus Equipment Company also serves customers’ needs in the rental and used equipment markets, and supports and services all makes and models with a parts distribution system and highly trained service technicians. In addition to the Columbus, Ohio, branch, the company has nine locations throughout the state. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

Russ King, Columbus Equipment Company, deploys a Hyster Reach truck fork lift to fill a parts order during the event. (L-R): Richard Durst of Columbus Equipment Company talks with the Troyer Family — John, Jerian, Bryson, Jaylynn and Jerald, all of Troyer & Sons Excavating, based in Frankfort, Ohio.

Bob Stewart (L) and Ron DuPero, both of Columbus Equipment Company, Morbark sales team, enjoy the open house event.

Columbus Equipment Company employees and customers line up for lunch that was provided during the grand opening event.

(L-R): Gabbey and Cara Albright; Shannon, Josh and Cookie Stivison; Michele, Ernie and baby Maddie Potter; and Alexis Jamshidi, family members of the owners of the company, were on hand to help celebrate the grand opening of the new facility.

(L-R): Manufacturing representatives of several of Columbus Equipment Company’s product lines help customers, including Scott Hendricks of Atlas Copco; Dale Keller of Takeuchi; Matt Guentter of Kubota; and Trevor Ballinger of Werk-Brau.

(L-R): Mark Klatt and Jon St. Julian, both of Columbus Equipment Company, welcome Norb Huner, retiree of Columbus Equipment Company.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 29

Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER Made in the USA

KOMATSU D65EX-15

1.866.643.1010 ClearSpan.com/ADCEGMW

The SEAL SAVER WILL: Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

STOP the never ending cycle of cylinder repairs.

WE MANUFACTURE t WE INSTALL WE SAVE YOU MONEY BUILDINGS OF 1,000 USES

SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

Visit

www.sealsaver.com

for more information or contact us at 1-800-683-5189

MISSISSIPPI VALLEY EQUIPMENT COMP PANY ANY

Fabric Structures

Hybrid Buildings

Foundation Solutions

ZERO PERCENT FINANCINGG AAVAILABLE AVVAILABLE

RESTRICTIONS R ESTTR ICT I ONS MAY MAY APPLY A PPLY

Manufacturing Inc.

(800) 325-8001 Equipment • CZM Drill Rig Distributor • Hydraulic Vibratory Systems • Excavator Mounted Lead System (ELS) • Diesel Pile Hammers • Swinging, Fixed & Railroad Lead Systems & Accessories • Hydraulic Auger Systems • Double-Acting Air/Steam Pile Hammers Services • Knowledgeable equipment applications support • 24/7 parts and service support • Custom design and fabrication

Please see our video at

www.constructionequiPmentguide.com and click attachments

we were founded to meet the pile driving and drilling equipment needs of our customers who build the foundation of our nation’s future. as partners with our customers, we strive to deliver on time, high quality, top performing and cost effective equipment for them to do their job well. we provide a safe, healthy and enjoyable work place where innovation, teamwork and integrity are the cornerstones of our legacy. we take pride in long lasting relationships with long lasting equipment.

Innovation – Teamwork – Integrity

Mississippi Valley Equipment Company 1198 Pershall Road • St. Louis, MO 63137 Phone: 800-325-8001 • Fax: 314-869-6862 • Web: www.MVE-STL.com

Page 30 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Bucyrus Erie 22B Dragline, 1:50 Scale - $275

Caterpillar 330D L Excavator, 1:50 Scale - $110

Bantam Truck Crane, 1:50 Scale - $135

Caterpillar 365C L Front Shovel, 1:50 Scale - $100

John Deere Wheel Loader, 1:16 Scale - $90

Caterpillar 5110B Excavator, 1:50 Scale - $110

John Deere 470G LC Excavator, 1:50 Scale - $85

Caterpillar 769C Off Highway Truck, 1:50 Scale - $100

Allis Chalmers Forty Five Motor Grader, 1:50 Scale - $110

Caterpillar D250E Articulated Truck, 1:50 Scale - $100

Komatsu D375A Dozer, 1:50 Scale - $95

Caterpillar CT660 Dump Truck, 1:50 Scale - $90

Caterpillar D6K XL Track-Type Tractor, 1:50 Scale - $65

Case CX250C Excavator, 1:50 Scale - $175

Grove TM1500 Crane, 1:50 Scale - $150

Bobcat M400 Gold, 1:25 Scale - $30

Shipping and Handling Included

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ May 21, 2016 â&#x20AC;˘ Page 31

BACKHOE LOADERS Deere 310SE, 1998, 9043 hrs, 3ZU VKLIW WUDQV [ w ENW H[W KRH WLUHV ...... $23,900 Deere 310SE, 1999, 5948 hrs, [ SZU VKLIW WUDQV DX[ K\G H[W KRH w ENW ......... $26,000 Deere 410E, 2000, 10050 hrs, [ ULGH FQWUO DX[ K\GU w ENW H[W KRH ............... $22,900 Deere 410G, 2001, 3758 hrs, Turbo, 4x4 pwr shift trans, aux hyd, ext. hoe, bkt ....... $37,500 Deere 410G, 2002, 5284 hrs, 7XUER [ SZU VKLIW WUDQV TFN FSOU w ENWV ............ $36,900 Deere 410G, 2005, 4622 hrs, AC, pilot cntrls, ext hoe, 4x4 pwr shift trans, qwk cplr ... $37,500 Deere 410G, 2006, 4448 hrs, $& SLORW FQWUOV H[W KRH [ SZU VKLIW WUDQV w ENW .... $39,500 Deere 410G, 2006, 5955 hrs, AC, turbo 2wd pwr shift trans, ride cntrl, aux hyd. ....... $25,000 Deere 410G, 2006, 6040 hrs, AC, turbo 2wd pwr shift trans, aux hyd .................. $25,000 Deere 410K, 2014, 371 hrs, AC, pilot cntrls, 4x4 pwr shift trans, ext dipper............. $98,900 Deere 410K, 2015, 370 hrs, AC, pilot cntrls, 4x4 pwr shift trans, ext. dipper ..........$114,000

CRAWLER DOZERS

SAVE TIME â&#x20AC;˘ SAVE MONEY SAVE LABOR â&#x20AC;˘ SAVE OIL

Deere 450J, 2013, 1188 hrs 5236 ORQJ WUDFN w SDGV K\GUR WUDQV w EODGH ...... $69,000 .... $17,500 Deere 550G, 1994, 17774 hrs Deere 700J, 2006, 903 hrs AC, x-OQJ WUFN w SDGV K\GUR WUQV w EODGH ............. $95,900 Deere 850J, 2009, 7274 hrs $& ZLGH ORQJ WUFN w SDGV K\GUR WUDQV w EODGH ..... $89,900 Cat D6M XL, 2000, 7001 hrs 5236 H[WUD ORQJ WUDFN w SDGV ........................ $54,000

EXCAVATORS â&#x20AC;˘ No tools required â&#x20AC;˘ No expensive hardware needed â&#x20AC;˘ No more rags stuffed into hoses â&#x20AC;˘ No more messy plastic caps â&#x20AC;˘ The ultimate contamination control tool â&#x20AC;˘ One hand installation â&#x20AC;˘ Eliminate hydraulic oil spills & clean up â&#x20AC;˘ Quick installation & ease of usage â&#x20AC;˘ Safe for personnel & environment â&#x20AC;˘ Industry acclaimed â&#x20AC;˘ 100% Made in USA INTRODUCING FlangeLock Tool Boxes TM

4 Tool Boxes Available All Include Slugs and O'Rings.

For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

Deere 160D LC, 2008, 4825 hrs AC, cntrl pattern select; long arm, wide pads ...... $79,500 Deere 160G LC, 2013, 1647 hrs $& FSOU PHFK WKXPE w ENW .................... $124,900 Deere 290G LC, 2011, 2380 hrs $& FSOU DX[ K\U w ENWV .................. $179,500 ... $115,000 Deere 350D LC, 2009, 6753 hrs Deere 350D LC, 2009, 7314 hrs $& ORQJ DUP ZLGH SDGV w ENW .................. $95,000 Deere 450DLC, 2007, 7680 hrs AC, med. arm, std boom, wide pads, bkt............ $95,000 Hitachi ZX210, 2013, 1009 hrs, $& ORQJ DUP DX[ K\G FSOU w ENW .............. $172,000 Cat 312E, 2015, 964 hrs AC, cntrl pattern select, med-ORQJ DUP VWG ERRP w ENW ..... $99,500 Hitachi ZX370, 2005, 12222hrs, $& FQWUO SDWWHUQ VHOHFW ORQJ DUP w w ENWV .. $64,900 Hitachi ZX500, 2002, 13474hrs, Med-ORQJ DUP VWG ERRP ZLGH SDGV w ENW ...... $42,500

SKID STEERS Deere 326E, 2014, 108 hrs, AC, EH cntrls, joystick, 2 sp, self-leveling aux hyd ....... $34,900 Deere 328D, 2012, 631 hrs, AC, EH cntrls, air ride seat, 2 sp, self-leveling, ........... $35,000 Deere 318D, 2011, 3430 hrs, Cab, EH, 2sp, Qtach, BA, bucket ...................... $26,900 Case TV380, 2013, 318 hrs, AC, hand cntrls, EH cntrls, air ride seat 2 sp, wide trck... $45,000

WHEEL LOADERS 2014 JD 544Ks - 5 in stock, 400-1100 hours, starting @ $139,000 2015 JD 544Ks - 7 in stock, 300-500 hours, starting @ $147,000 (AC, Coupler, 3 yd bkts, some avail. w/3rd valve & Hi Lifts, municipal owned) Deere 444J, 2006, 7148 hrs, AC, qk cplr, front diff lock, 20.5 tires, gen purp bkt ...... $65,000 Deere 524K, 2013, 1593 hrs, AC, 3 spool; qk cplr, ride cntrl, high lift ............... $129,500 Deere 544J, 2005, 5040 hrs, ride cntrl, dual diff locks, 20.5 tires gen purp bkt ....... $76,000 Deere 644K, 2013, 781 hrs, AC, joy stick steer, aux hyd qck cplr, high lift boom .... $224,500 Volvo L35G, 2013, 1671 hrs, AC, 3 spool, aux hyd, qck cplr, gen purp bkt ........... $62,500

Contact John Reinen (used equipment manager) at 608-220-1723 or Lewis at 608-837-5141 ext.1019

For Photos & Detail Descriptions visit: www.brookstractor.com Six Locations in Wisconsin to serve you - Sun Prairie z Milwaukee De Pere z West Salem z Plover z Mt. Pleasant (coming 2017)

Page 32 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WACKER-NEUSON SKID STEER

WACKER-NEUSON WL36 ARTICULATED LOADER

SW24 delivers 2,340# cap. 74.3hp Perkins diesel. SW28 delivers 2,800# cap.

SW24$34,000 w/financing. $2,700 cash discount

SW28$36,000 w/financing. $2,800 cash discount

1988 BROUWER FORKLIFT Diesel, 3500 hrs, 21’ mast.

$10,500

WACKER-NEUSON RD12A ROLLER

55 hrs, 48hp diesel. ALSO WL 60 19 hrs, 101hp Perkins diesel.

WL36$49,000

NEW FINANCING AVAILABLE!

$14,500

WL60$76,000 w/financing. $3,700 cash discount

LAND PRIDE ROCK HOUND SR2672 POWERED RAKE

LOWE XR21 TRENCHER 3’ deep, 6” wide ALSO LOWE M7R TRENCHER 2’ deep, 4” wide

New, Hyd. rotation, skid steer mount.

$5,800

XR21$2,200

M7R$1,900

MUELLER I MPLEMENT 608-935-2751 4948 County Road YZ • Dodgeville, WI 53533 Email: muelleri@mhtc.net

www.muellerrental.com

Roland Machinery to Host Intelligent Machine Control Demonstrations Roland Machinery Co. will be hosting intelligent machine control demonstrations at its location at 604 Stokely Drive, Deforest, Wis., on June 15. Lunch will be provided at the event, and company representatives will have Komatsu dozers and excavators equipped with new intelligent machine technology on site for customers to learn about and operate. The intelligent machines are designed to help customers increase their production, improve their performance, lower their costs and provide a highquality finished product on their job sites. To RSVP, call Deena Nick 920/532-0165. For more information, visit www.rolandmachinery.com.

Bridgeport, MI 989/777-0090 Grand Rapids, MI 616/538-2400 Lenox, MI 586/727-7502 New Hudson, MI 248/437-8121 Williamsburg, MI 231/267-5060

www.westsidetractorsales.com Naperville, IL 630/355-7150 Rockdale, IL 815/730-9011 Rockford, IL 815/961-3160 South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Bloomington, IN 812/333-9677 Fort Wayne, IN 260/482-8576 Indianapolis, IN 317/544-3411 Lafayette, IN 765/447-6933 South Bend, IN 574/232-1461

www.brookstractor.com Sun Prairie, WI 608/837-5141 Milwaukee, WI 414/462-9790 De Pere, WI 920/336-5711 West Salem, WI 608/786-2644 Plover, WI 715-254-2777 Coming 2016 Mt. Pleasant, WI

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ May 21, 2016 â&#x20AC;˘ Page 33

PRODUCTIVITY POWERHOUSE. Powered by our 6.8L EPA Final Tier 4 (F T4)/EU Stage IV diesel engine, the 850K Crawler Dozer picks up the pace when it comes to productivit y. Designed to work just as smart as you work hard, it comes packed with detail-oriented features that help you get in, out, and on to the next job. Our purpose-built mainframes optimize blade ratio and center of gravit y for superior balance. So whether you opt for a power/angle/tilt (PAT) or an outside-mount straight or VHPL 8 EODGH \RXĹ¤OO ZDWFK SURĆ&#x;WDELOLW \ VKDSH XS ULJKW EHIRUH \RXU H\HV

www.nortrax.com Ashland, WI 715/682-5522 Chippewa Falls, WI 715/834-2924 Monico, WI 715/487-5583 Mosinee, WI 715/693-3820 Duluth, MN 218/722-7456 Bemidji, MN 218/759-1996 Grand Rapids, MN 218/326-9427 Escanaba, MI 906/789-9054

www.erbequipment.com Fenton, MO 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563 Cuba, MO 573/885-0500 Owensboro, KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484

www.meadetractor.com Bowling Green, KY 270/842-3400 London, KY 606/862-8447 Louisville, KY 502/253-3721 Richmond, KY 859/623-2030 Chattanooga, TN 423/855-0633 Kingsport, TN 423/349-5001 Knoxville, TN 865/546-3207 La Vergne, TN (Nashville) 615/501-8600

Page 34 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 35

Howell Tractor 480 Blaine Street • Gary, IN 46406 800/852-8816 Fax: 219/977-4220

Illinois Truck & Equipment www.iltruck.com 320 Briscoe Drive • Morris, IL 60450 815/941-1900 Fax: 815/941-1486

Custom Truck & Equipment www.cte-equipment.com 7701 E. 24 Highway • Kansas City, MO 64125 800/861-1065 • 816/241-4888 Fax: 816/241-8826

General Equipment & Supplies, Inc. www.genequip.com 4600 Valley Industry Blvd. S. • Shakopee, MN 55379 800/966-1455 Fax: 952/224-1570 3901 N. Lewis Ave. • Sioux Falls, SD 57104 605/336-9000 Fax: 605/336-0073

Grand Equipment Company www.grandequipment.com 3310 Hudson Trail Dr. • Hudsonville, MI 49426 616/896-7700 Fax: 616/896-6700

ONE FOCUS. COMPLETE SOLUTIONS. > >

Construction Machinery Company www.cmcky.com 2911 S. English Station Rd. • Louisville, KY 40299 502/267-4020 • 866/901-2262 Fax: 502/261-9251

> > >

2235 Ragu Drive • Owensboro, KY 42303 270/683-2000 • 877/683-2262 Fax: 270/683-3727 267 W. Jay Louden Rd. • Carrollton, KY 41008 502/732-4661 Fax: 502/732-8355

Kelbe Brothers Equipment Co., Inc. www.kelbebros.com 12770 W. Silver Spring Drive • Butler, WI 53007 262/373-2151 Fax: 262/373-2102 4621 Dutch Mill Rd. • Madison, WI 53716 608/221-8300 Fax: 608/221-0610 3101 French Rd. • DePere, WI 54115 920/343-6496 Fax: 920/343-6449

> > >

Page 36 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Top Dealer…

Gehl, a leading manufacturer of compact equipment for agriculture and construction markets, presented Fritz Aschilman and Mike Tibbits of Farmer’s Implement in Mineral Point, Wis., with the 2015 Gehl Top Dealer Award. This prestigious award is based on the overall sales performance for North American Gehl Dealers in 2015. Farmer’s Implement of Mineral Point was recognized and awarded for its top performance at the Manitou Americas corporate headquarters in West Bend, Wis., during the “Next Big Thing” new product introduction dealer event. “I would like to commend Farmer’s Implement of Mineral Point for their excellent sales performance this past year. They have demonstrated commitment to their customers, dedication to our Gehl brand, and are a proven leader for our growing dealer network,” said Eric Burkhammer, Vice President of Sales and Marketing of Manitou Americas Inc. “We are pleased to partner with Farmer’s Implement and I’m proud to present them with our Gehl 2015 Top Dealer Award.” Gehl is a manufacturer of compact equipment used worldwide in construction and agricultural markets. Founded in 1859, the Company is headquartered in West Bend, Wis., with manufacturing facilities in Madison and Yankton, S.D.

ASSOCIATED PRESS

KATHMANDU, Nepal (AP) Nepal’s prime minister announced on April 25 the start of reconstruction of key heritage sites in and around the capital that were damaged by an earthquake that killed nearly 9,000 people and devastated the country one year ago. Prime Minister Khadga Prasad Oli offered prayers at the 17th century white-walled temple Anantapur, which was damaged in the magnitude 7.8 quake on April 25, 2015, along with more than 600 other historic structures. More than half a million homes also were destroyed, but hardly any have been rebuilt. Nepal has been criticized for delays in reconstruction — largely due to bureaucratic bungling — of its historic structures and residents’ homes despite foreign donors pledging $4.1 billion

TIER 4 INTERIM E

• Lower your cost of ownership MAINTENANCE B • Increase equipment uptime and reliability • Protect the value of your Tier 4 capital investment

y Komatsu T CARE complim

To learn more e about

It’s just part of our Program Komatsu designed to deliver complete CARE contact your 3 years, plus 2 c service and support solutions to Komatsu customers. Komatsu distributor or scan

thisCARE QR code Komatsu

To learn more about with your contact your Komatsu distributor or scan smart phone. this QR code with your smart phone.

Lower your c

Increase equ

Protect the va

It’s just part of ou solutions to Kom

MIDWEST KOMATSU DISTRIBUTORS

W E S T K O M AT S U D I S T R I B U T

Berry Tractor & Equipment Bacon-Universal Company, Inc Company, Inc..

Dan Miller (L), president and CEO of Manitou Americas, and François Piffard (R), executive vice president of sales and marketing of Manitou Group, present the 2015 Gehl Top Dealer Award to Fritz Aschliman and Mike Tibbits of Farmer’s Implement, Mineral Point, Wis.

For more information, call 262/334-9461 or visit www.gehl.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

After Delays, Nepal Begins Reconstruction of Quake-Damaged Heritage Sites By Binaj Gurubacharya

Every Komatsu Tier 4 construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filter exchanges. GO WITH KOMAT With Komatsu CARE you can:

>>>>>

Gehl Presents Award to Farmer’s Implement of Mineral Point, Wis.

GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.

toward that end. Aid groups have demanded that authorities speed up the process and change some of the laws that have become obstacles. Oli said that work would begin on rebuilding the temple and three other heritage sites in Kathmandu, including the old palaces and temples at Kathmandu’s Durbar Square and key sites in the nearby cities of Patan and Bhaktapur. Anantpur is one of the small Buddhist temples, stupas and monasteries surrounding the 5th-century hilltop shrine of Swayambhunath that lies in ruins. The site also is called the “monkey shrine’’ for the thousands of monkeys that congregate on the spot at the northwest edge of Kathmandu. It is listed among the UNESCO heritage sites. The prime minister said the work would progress swiftly, adding it was a huge task that would require time. He also said construction of private hous-

es have been initiated in 10 districts to mark the anniversary. According to the International Federation of Red Cross and Red Crescent Societies, an estimated 4 million people are still living in sub-standard temporary shelters in conditions that pose a threat to their health and well-being. Only 661 families have received the first installment of a 200,000-rupee ($1,868) government grant, getting 50,000 rupees ($467) so far. Out of the $4.1 billion pledged, Nepal has so far received just $1.28 billion. The delay in getting the money has been blamed on the government taking months to set up the National Reconstruction Authority, which was done only in December. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

www.berrytractor.com KS Garden City 620-277-2290 • 877-469-1763 Topeka 785-266-9509 • 877-469-1763 Wichita 316-943-4246 • 877-469-1763 MO Springfield 417-831-2651 • 877-469-1763

Hilo 808-935-8595 800-352-3508 Honolulu 808-839-7202 800-352-3508 Kailua-Kona 808-326-1212 800-352-3508 Kauai (Lihue) 808-245-8472 800-352-3508

Soldotna 907-262-5977 800-254-5977 Wasilla 907-376-3838 800-973-2607

www.brandeismachinery.com IN Evansville 812-425-4491 Ft. Wayne 260-489-4551 Indianapolis 317-872-8410 KY Corbin 606-528-3700 Lexington 859-259-3456 Louisville 502-491-4000 Paducah 270-444-8390 Stanville 606-478-9201

Claremont Clar emont Equipment Co Co.. .clairemontequipment.com CA

Escondido 760-739-9100 Imperial 760-355-7700 San Diego 858-278-8351

Craig Taylor Equipment Cr Company ylorequipment.com

Oklahoma City 405-495-7820 800-375-3339 Tulsa 918-438-1700 800-375-3733 TX

Abilene 325-692-6334 877-577-5729 Amarillo 806-373-2826 800-283-1247 Dallas 214-371-7777 800-753-1247 Ft Worth 817-378-0600 877-851-9977 Lubbock 806-745-2112 866-289-6087

Komatsu Equipment Co. Co. tsueq.com

Anchorage 907-276-5050 800-279-5051 Fairbanks 907-452-1192 800-452-1192

Columbus Equipment Company www.columbusequipment.com OH Cadiz 740-942-8871 Cincinnati 513-771-3922 Columbus 614-443-6541 Dayton 937-879-3154 Massillon 330-833-2420 Painesville 440-352-0452 Perrysburg 419-872-7101 Piketon 740-289-3757 Richfield 330-659-6681 Zanesville 740-455-4036

Continental Equipment Corp. www.ceceq.com MI Lansing 517-321-8000 MI - Continental Equipment Corp. Service Branches Bridgeport 989-777-0090 • 989-777-1583 Lenox 586-727-7502 • 586-727-7311 New Hudson 248-437-8121 • 248-437-9750 Williamsburg 231-267-5060 • 231-267-5257

Hurric 435-9 Salt L 801-9 South 801-9

Kirb Kirby-Smith y-Smith Mac Machinery hinery Inc Inc.. WY

Brandeis Machinery & Supply Company Wailuku Maui 808-244-9158 800-352-3508

Elko 775-753-7561 North Las Vegas 702-399-1004 Reno 775-356-1334

Gillett 307-6 Rock S 307-6

Mode ID

Boise 208-3 800-2 Pocate 208-2 800-8 MT

Billing 406-2 800-7 Kalisp 406-7 800-4 Misso 406-5 800-3 OR

Eugen 541-6 800-8 Portla 971-2 800-9

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 37

Diesel Machinery, Inc. www.dieselmachinery.com SD Aberdeen 605-725-4364 • 888-762-6312 Rapid City 605-348-7438 • 800-658-3047 Sioux Falls 605-336-0411 • 800-456-4005

General Equipment & Supplies www.genequip.com ND Bismarck 701-223-9700 • 800-279-4437 Fargo 701-282-2662 • 800-437-2924 Minot 701-852-0479 • 800-852-0479 Williston 701-572-0570

Road Builders Machinery & Supply Co., Inc. www.roadbuildersmachinery.com KS Kansas City 913-371-3822 NE Grand Island 308-384-2620 Lincoln 402-325-0447 Omaha 402-331-9200

Road Machinery & Supplies Co. www.rmsequipment.com IA Cedar Rapids 319-363-9655 • 800-616-6615 Des Moines 515-282-0404 • 800-555-1445 Sioux City 712-252-0538 • 800-633-9104 IL Milan 309-787-1742 • 800-633-9114 MN Duluth 218-727-8611 Savage 952-895-9595 • 800-888-9515 Virginia 218-741-9011 • 800-752-4304

Roland Machinery Co. www.rolandmachinery.com IL Bolingbrook 630-739-7474 Carterville 618-985-3399 Marengo 815-923-4966 Springfield 217-789-7711 IN Portage 219-764-8080 MI Escanaba 906-786-6920 MO Bridgeton 314-291-1330 Cape Girardeau 573-334-5252 Columbia 573-814-0083 Palmyra 573-769-2056 WI DeForest 608-842-4151 DePere 920-532-0165 Eau Claire 715-874-5400 Franksville 262-835-2710 Schofield 715-355-9898

www.komatsuamerica.com/komatsu-care

MY CUSTOMERS LOVE KOMATSU!

SUPPORTED WITH PRIDE

Page 38 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Lano Equipment Hosts Customer Appreciation Event

Darren Droegemueller (L), MTI Distributing Toro representative, Brooklyn Park, Minn., and Kurt Lano, sales manager, Lano of Shakopee, stand with a Grandstand Multiforce, the newest offering from Toro featuring a Boss 5-ft. (1.5 m) plow.

Dan Reetz of Shaver Manufacturing, Graettinger, Iowa, with the company’s newest attachment, a utility pole puller on a Bobcat T450.

ano Equipment hosted a customer appreciation event at its Shakopee, Minn., location on April 15. Guests had the opportunity to get in the driver’s seat of the newest models of equipment. Equipment representatives of Bobcat, Doosan, Kubota, Toro and Felling Trailers, among others, were available

to answer questions about the machines. Attendees also enjoyed door prizes and lunch, which was served at the event. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

The Virnig Attachments team of Darin Virnig, developmental engineer; Dean Virnig, president; and Joe Shaughnessey, sales manager, showcase the Virnig 72-in. (182.8 cm) tiller on a Bobcat T650 and the Virnig 72-in. brush mower on a Bobcat S650.

(L-R): Joey and Steve Fisher, owners of SJ Fisher Construction, Excelsior, Minn., talk with Larry Coon, sales, Lano Equipment.

Evan Lano, service and support of Lano Equipment of Shakopee, Minn., showcases a Toro Dingo TX1000.

Mark Novotny of Novotny Farms, New Prague, Minn., shakes hands with Randy Eckstein, salesman of Lano of Shakopee, before looking at this new Kubota SSV65.

Rod Lano (L), former Lano Equipment vice president, talks with Justin Lano, Lano of Shakopee sales manager.

SECTION

Trucks & Trailers Pages 39-51

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Mack mDRIVE HD Now Standard on Granite Models In response to increasing customer demand, Mack Trucks announced its Mack mDRIVE HD 13-speed automated manual transmission (AMT) will be standard on Mack Granite models. Featuring a low ratio creeper gear, the mDRIVE HD 13-speed helps boost customer productivity due to improved performance and reduced weight, according to the manufacturer. Mack is the first truck manufacturer in North America to offer low reduction creeper gear ratios in a proprietary automated manual transmission. Since Mack announced the availability of the mDRIVE HD 13-speed in March, customer response has been overwhelmingly positive, encouraging Mack to make the 13-speed AMT standard on the Granite model starting with production of the 2017 MP8 engine. The mDRIVE HD 13-speed also is available on Mack Pinnacle and Titan by Mack models. “Making the mDRIVE HD 13-speed standard on the Granite is a natural evolution of our industry leadership,” said Dennis Slagle, president of Mack Trucks. “Since its introduction, the mDRIVE has become incredibly popular — starting first with highway and more recently with many heavyduty vocational applications. The introduction of the 13- and 14-speed gears expands the range and performance in vocational applications so much so that it is only natural for it to become our standard offering in the Granite model.” Available in direct or overdrive configurations, the new Mack mDRIVE HD 13-speed offers a low reduction creeper gear ratio designed for easier startability on steep grades or when the truck is carrying a heavy load. This improved startability also allows

customers to select a faster rear axle ratio. The faster ratio decreases engine rpm at highway speeds, saving fuel as the truck travels between job sites. The mDRIVE HD 13-speed, like all Mack mDRIVE AMTs, is monitored by Mack GuardDog Connect and serviceable at more than

400 Mack dealers. GuardDog Connect is Mack’s proactive diagnostic and repair planning system. It monitors fault codes that could potentially shut down a truck or lead to an unplanned visit to the dealer. GuardDog Connect enables quick diagnosis of issues, proactive scheduling for repairs and confirmation that needed parts are in stock and ready to install, all while the truck is still on the job. The Mack mDRIVE HD 13-speed shares its architecture with the standard mDRIVE HD, including reinforced internal components and the same gear ratios for the 12 forward speeds. Mack also announced in March the availability of the mDRIVE HD 14-speed. The addition of the two transmissions with creeper gears enables Mack to meet the needs of a

wider range of customer applications with the power and performance that only a fully integrated powertrain can offer. Mack mDRIVE AMTs are available exclusively with Mack MP engines. Due to the new low reduction creeper gears, the mDRIVE HD 13- and 14-speed The Mack mDRIVE HD 13-speed automated manual transmission (AMT) is standard on Mack Granite models.

transmissions not only improve performance in off-road, heavy haul and construction applications, but also for on-highway applications, according to the manufacturer. Mack now offers both new mDRIVE HD variants in Mack Pinnacle models. The addition of the low reduction creeper and multispeed reverse gears is made possible by a short extension added to the front of the transmission case. Despite the additional capabilities, the new mDRIVE HD models are less than 5 in. (12.7 cm) longer and only 90 lbs. (40.8 kg) heavier than the standard mDRIVE HD, maintaining a weight advantage of nearly 150 lbs. (68 kg) compared with automatic transmissions. The Mack mDRIVE HD 14-speed, available only in an overdrive configuration, adds a second ultra-low-speed reduction gear designed for curb pouring applications or

low-speed, heavy-haul maneuvering. Both transmissions offer up to four reverse gear ratios. In addition to the two new models, all Mack mDRIVE transmissions, including the standard mDRIVE and mDRIVE HD, received numerous updates for improved performance and durability. The transmissions are controlled by a redesigned gearbox control unit, while a new clutch with a larger torsional damper helps reduce driveline vibration. Component wear monitors also were added to enable predictive maintenance. “Response to the mDRIVE and mDRIVE HD has been tremendous,” said Roy Horton, director of product strategy. “Currently, mDRIVE penetration for Pinnacle axle back and axle forward models is at approximately 80 percent and 60 percent, respectively, while mDRIVE HD penetration for Granite models is about 20 percent and growing. The penetration level of mDRIVE in all our models has continued to increase since its introduction.” Available in axle forward or axle back configurations, the Mack Granite model delivers the reliability, durability and strength expected of a Mack. The high-performing, fuel-efficient Mack MP7 and MP8 engines range from 325 hp and 1,200 lb.-ft. of torque to up to 505 hp and 1,760 lb.-ft. of torque. Every Granite model is built on Mack’s proven Cornerstone chassis and can be paired with a Mack Camelback suspension, a vocational industry standard, or the Mack mRIDE spring suspension, which delivers higher ground clearance and extreme articulation. The Mack mDRIVE HD 13- and 14speed AMTs are scheduled to go into full production in October. For more information, visit www.macktrucks.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Page 40 • May 21, 2016 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Kenworth Video Features Its Flagship Vocational Truck Kenworth has released an informative, 7-1/2-minute video on the Kenworth T880 vocational truck. Named the 2015 Truck of the Year by the American Truck Dealers (ATD), the Kenworth T880 exemplifies Kenworth’s long-time core values of quality, innovation and technology in producing The World’s Best trucks. Day in and day out, the durable T880 is a dependable, versatile truck capable of performing the toughest jobs productively and efficiently, according to the manufacturer. The video features T880 dump, mixer, wrecker, heavy hauler, logger and refuse trucks in action going up steep grades, in the rain, and on- and off-road. Watch the video on the T880 section of Kenworth’s website (www.kenworth.com/trucks/t880), and also under the Kenworth YouTube site (www.youtube.com/watch?v=WY 79QlnTUxQ). The T880 is standard with the PACCAR MX-13 engine rated up to 500 hp and 1,850 lb.-ft. of

The video features T880 dump, mixer, wrecker, heavy hauler, logger and refuse trucks in action going up steep grades, in the rain, and on- and off-road.

torque. The PACCAR MX-13 provides a lightweight, fuel-efficient engine for vocational applications, including dumps and heavy haul applications over 100,000 lbs. The T880 also is available with the new PACCAR MX-11 engine with up

4 DIESEL OIL CHANGES

$385.

to 430 hp and 1,550 lb.-ft. of torque. The 10.8-L engine is 400 lbs. lighter than 13-L engines and provides truck operators with enhanced payload capacity and fuel economy. The video includes information

FEDERAL DOT VEHICLE INSPECTION

$98.

FOR SYSTEMS 7 QT OR LESS. INCLUDES OIL, FILTER, DISPOSAL, AND MULTIPOINT INSPECTION.

IN THE BUSINESS OF DOING BUSINESS? NOW NEWLY AVAILABLE HERE AT FURY DODGE RAM OF LAKE ELMO FOR YOUR COMPLIANCE NEEDS FOR MINNESOTA AND WISCONSIN.

RESTRICTIONS MAY APPLY, CONTACT YOUR SERVICE ADVISOR FOR MORE INFORMATION.

5550 SERIES TRUCKS AND SMALLER. NOT AVAILABLE FOR AIR BRAKE APPLICATIONS. OTHER RESTRICTIONS MAY APPLY, CONTACT YOUR SERVICE ADVISOR FOR MORE DETAILS.

Jeff Leonard or Dale Coggin Service Department

Fury Dodge Ram of Lake Elmo, Minnesota 651-256-8125 • Visit us at furymotors.com

on the Eaton UltraShift Plus transmission — available on the T880 — which offers Hill Start Aid, creep modes, auto neutral, and engine and clutch over speed protection. UltraShift Plus transmissions employ grade sensing,

weight computation and driver throttle commands for reliability and performance during launch and shift decisions. In addition, the video explores the Kenworth T880’s offering of lightweight, factory-installed lift axles and suspension options. The video also focuses on important driver comfort features. The quiet, 2.1-meter lightweight and robotically assembled aluminum cab provides a spacious 23 in. of room between the seats. The Kenworth proprietary air suspension seats automatically adjust to the driver’s weight. Drivers also benefit from the panoramic windshield, complex reflector headlamps, air-assisted hydraulic clutch, and an ergonomic dash panel that is easy to read and use. In addition to its day cab configuration, the T880 is available with 52- and 76-in. mid-roof sleepers, along with a new 40-in. sleeper. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Significant Accomplishment…

TBEI Lake Crystal Achieves ISO 9001:2015 Certification Truck Bodies & Equipment International Inc. (TBEI) has announced that its Lake Crystal facility has achieved ISO 9001:2015 Certification. The recognition makes the TBEI Lake Crystal facility one of the only dump body manufacturers in the United States to achieve this level of certification. The certification comes just three years after the facility was awarded the ISO 9001:2008 certification. The TBEI Lake Crystal facility manufactures the Crysteel, J-Craft and Ox SuperDump products. “This is truly a significant accomplishment, magnified by the fact that the facility achieved ISO 9001:2008 certification only three years ago,” said Bob Fines, TBEI president and CEO. “To achieve this next level of certification is very impressive. Less than one percent of companies in the United States are ISO certified, and as one of the only dump body manufacturers in the country to obtain this level of certification, we are extremely proud of our Lake Crystal facility and pleased to continue providing our cus-

“To achieve this next level of certification is very impressive.” Bob Fines TBEI

tomers with the highest quality products.” The International Organization for Standardization, or ISO, is an independent, non-governmental organization headquartered in Geneva, Switzerland. ISO has members in 161 countries around the world. The ISO 9001:2015 Certification is a quality management certification that ensures that all manufacturing systems are documented, trained to, followed, audited and repeatable. For more information, call 800/533-0494 or visit www.crysteel.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 21, 2016 • Page 41

Farm-Rite Equipment Inc. Dassel 901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857 Willmar 1515 West litchfield Ave. Willmar, MN 56201 Toll Free: 877-484-3211 320-235-3672 St. Cloud 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 Toll Free: 844-262-2281 320-240-2085 www.farmriteequip.com

K.C. Bobcat

McCann

2209 SW US Hwy. 40 Blue Springs, MO 64015 800-697-4228 Fax: 816-229-7631 Olathe, KS 800-598-4228 Platte City, MO 800-984-3001

Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 • Fax: 630-627-8711 Bolingbrook 250 E. North Frontage Road Bolingbrook, IL 60440 630-739-7770 • Fax: 630-739-7699 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 • Fax: 312-421-3502 Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 • Fax: 708-597-9945 McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 • Fax: 815-385-2975 Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 • Fax: 219-865-0269 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 • Fax: 847-526-9448 www.McCannOnline.com

Diamond Equipment, Inc. Indiana 1060 E. Diamond Ave. Evansville, IN 47711 Toll Free: 800-258-4428 812-425-4428 • Fax: 812-421-1036 2000 Harlan Drive Terre Haute, IN 47802 Toll Free: 888-343-4747 812- 299-4747 • Fax: 812-299-3687 Illinois 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 Toll Free: 800-388-6396 618- 242-2273 • Fax: 618- 242-9161 Kentucky 1046 Lovers Lane Bowling Green, KY 42103 Toll Free: 800-489-1061 270-781-1061 • Fax: 270-781-0907 Tennessee 1530 Heil Quaker Blvd. La Vergne, TN 37086 Toll Free: 800-635-9454 615-641-1100 • Fax: 615-641-1108 www.diamondequipment.com

Ziegler CAT 8000 County Road 101 East Shakopee, MN 55379 800-352-2812 13822 West Freeway Drive Columbus, MN 55038 866-982-5656 2225 255th Street St. Cloud, MN 56301 800-522-9469 1500 Ziegler Drive NW Altoona, IA 50009 800-342-7002 53 Harbor Drive Sioux City, IA 51111 800-342-1847 www.zieglercat.com

Page 42 • May 21, 2016 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 21, 2016 • Page 43

CUSTOM SIZES AND GVWs AVAILABLE ILLINOIS Country Blacksmith Trailers Mt. Vernon (618) 242-0800 NITE Equipment Pecatonica (815) 239-9096 Stephens Trailer Sales Taylorville (217) 824-2815 INDIANA M.H. Eby, Inc. Logansport (888) 758-3011

Gooseneck • 25,000 lb GVW available in 20' + 5', 25' + 5' and 30' + 5' • 25' + 5' model weighs approximately 6,000 lbs • 2,000 lbs lighter than steel trailers • More affordable than you might expect

M.H. Eby, Inc. Seymour (866) 810-3026 IOWA Roeder Brothers Bellevue (563) 872-5527 M.H. Eby, Inc. Story City (866) 894-3297 MICHIGAN Burnips Equipment Co., Inc. Dorr (616) 896-9190 MINNESOTA Sparks Custom Trailers, LLC Battle Lake (888) 480-6815

Deck-Over 14,000 lb GVW available in 18', 20' and 24'6" lengths • 10,000 lb GVW available in 18' and 20' lengths • 10" frame rail on 14k trailer—lightweight and strong • 750 – 1,000 lbs lighter than comparable steel trailers • Wide choice of ramps and other options •

NEBRASKA Rod’s Power Sports Roca (402) 423-6230 OHIO RODOC Leasing and Sales Delphos (419) 692-5881 Gingerich Trailer Sales, LTD Millersburg (330) 674-4441

Low-Profile 14,000 lb and 10,000 GVW available in 18' and 20' lengths, with 82" between fenders • Wide choice of ramps and other options • 20' 14k trailer weighs 2,510 lbs •

HAUL MORE & SAVE MORE WITH

Bennett Trailer Sales Inc Salem (330) 533-4455 Midway Trailer Sales St. Mary’s (419) 394-4408 M.H. Eby, Inc. West Jefferson (800) 752-0507 SOUTH DAKOTA M.H. Eby, Inc. Worthing (877) 667-0293 WISCONSIN Big O’s Trailers Inc. Portage (608) 742-2473 Auto and Toy Trader LLC West Salem (608) 612-0505

Eby aluminum equipment trailers are built on a solid reputation for superior materials and expert design. Eby equipment trailers combine the rugged durability your work requires with added-value advantages that come with aluminum—lower trailer weight, higher payload capacity and improved fuel economy. Rust-proof aluminum protects your equipment investment by lowering your maintenance costs and delivering unmatched resale value.

www.mheby.com • 800-292-4752

M. H. Eby, Inc.

Page 44 • May 21, 2016 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Michelin…

X ONE XZU S+ Retread Delivers Greater Wear Life

Towmaster Updates Marketing App

Towmaster Inc., manufacturer of equipment trailers and truck bodies, released a major update to its original iOS trailer app. This new version is faster, more intuitive and offers a new slider menu, according to the company. “Our trailer marketing app was the first of its kind in the trailer industry when it was released three years ago, and Towmaster continues to offer the only app in the industry of its kind,” said Shane Zeppelin, marketing manager at Towmaster. “Our app provides an easy reference for customers and dealers on the products we sell, and our new version includes more information than the original.” Towmaster’s app contains PDFs of all of Towmaster’s trailer models, an extensive image gallery, links to Towmaster’s website, YouTube videos and social media, plus you can send images and PDFs from directly within the app. Need to contact a sales rep? Simply go to the contact screen and The Michelin X ONE XZU S+ Pre-Mold retread features click the email or phone number. a 29/32 in. deep tread depth and an optimized, straight “These features give our dealers and rib design. customers a unified source for referMichelin Americas Truck Tires has introduced the Michelin X ONE XZU S+ Pre-Mold retread, an all-position, next-generation wide-base single, for waste and refuse trucks that operate in demanding urban environments. This retread delivers up to 50 percent greater wear life compared to the Michelin X One XZU S Pre-Mold, and is designed with a XL Specialized Trailers has special winged tread for maximum shoulder protection in launched its XL 90 hydraulic detachhigh-scrub applications, according to the manufacturer. able extendable (HDE) to the market. The XL 90 HDE uses XL’s extendable technology to extend the main deck from 28 ft. 4 in. to 50 ft. 3 in. (8.6 to 15 with extension stops every 24 in. Co-Extrusion technology and a unique m) (61 cm). The Extend-A-Trac uses 6-in. (15 two-layer compound minimize the casing cm) greasable rollers with oil-impregtemperature for enhanced durability. nated bronze bushings for smoother extension and retraction. The 53-ft. 5in. (16.3 m) long trailer has a flip axle to help scale large loads and a 44-in. “With the demanding conditions in urban areas, waste and (112 cm) flip neck with kingpin setrefuse customers are looking for retreads that can handle tings at 16 and 24 in. (40.6 and 61 cm), these punishing conditions and reduce their cost-per-hour,” which together make the unit 84 ft. said Adam Murphy, vice president of marketing of Michelin (25.6 m) long when extended. A Americas Truck Tires. “The new Michelin X ONE XZU S+ detachable wheel area allows drivers to Pre-Mold retread exceeds those demands with incredible insert more decking. The XL 90 HDE features an 18-in. wear life, even when trucks are continuously starting, stop(45.7 cm) loaded deck height on the ping and turning as they pick up waste in city areas.” main deck, while the rear deck transiThe Michelin X ONE XZU S+ Pre-Mold retread features tions to just a 24-in. height, making the a 29/32 in. deep tread depth and an optimized, straight rib unit ideal for tall loads. This extremely design that contribute to outstanding wear. Co-Extrusion low rear deck height is achieved by technology and a unique two-layer compound minimize the cutting the axles through the web of the trailer. casing temperature for enhanced durability. Operators will appreciate the extra (This story also can be found on Construction Equipment versatility of the XL 90 HDE. The unit Guide’s Web site at www.constructionequipmentguide.com.)

Towmaster’s app contains PDFs of all of Towmaster’s trailer models, an extensive image gallery, links to Towmaster’s website, YouTube videos and social media, plus you can send images and PDFs from directly within the app.

ence materials on our products,” Zeppelin said. “Rather than trying to find photos and PDFs in the phone’s or tablet’s image library or reader app, Towmaster’s app has everything in one place. The app syncs with our server, so when an update or new model is released, the app will retrieve the new images and PDF files.”

The update is available now on iOS devices with an Android update currently in development. If you have the original app installed, you can update it through your App Updates. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

XL Introduces 90 HDE to Market

The XL 90 HDE uses XL’s extendable technology to extend the main deck from 28 ft. 4 in. to 50 ft. 3 in. (8.6 to 15 m) with extension stops every 24 in. (61 cm).

comes with a pin-on axle, yet is prepped for a single-axle power booster as well. The gooseneck features variable ride with five ride height positions, a 13-hp unit with cover, and 74in. (188 cm) swing clearance. Other features include a psi system, a 20,000lb. brake rating, a second leveling valve and a shut-off valve on all axles. A 4-way plug runs the electrical dump valve and also dumps the air from the flip axle. A 4+3+4 taillight system plus four clearance lights per side and midturn lights make the HDE highly visible.

“The XL 90 HDE is one of those unique products that has a versatile spec and lots of desired options,” said Rodney Crim, vice president of sales of XL. “We believe this trailer will benefit many drivers out there and we had a lot of interest from customers when we introduced it at the MidAmerica Trucking Show.” For more information, visit xlspecializedtrailer.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 21, 2016 • Page 45

+ PLUS CURRENT

SCHEDULED MAINTENANCE1

+ PLUS

2-YEAR/24K

UPFIT CASH

OFFERS

Stack up and save with the new 2016 Business Choice Program! The 2016 Business Choice Program is geared toward providing business owners the best value on vehicles that run your business. Purchase or lease an eligible Chevrolet vehicle and get the new 2-year/24,000-Mile Schedules Maintenance Program1 and stack on any of our Business Choice offers, like the Uplift Cash Allowance2 or the GM Accessory Cash Allowance,3 to save more. You can also add current retail offers to this equation to make it a deal you can’t pass up. Purchasers of 2014-2015 vehicles are eligible for the 2-year/30,000-mile Business Maintenance Program7 along with the Uplift Cash Allowance2 or the GM Accessory Cash Allowance.3 Learn more at gmfleet.com/business-choice-offers.

1 On select models starting with 201È. eligible vehicles include purchased or leased new 201È chevrolet cars, trucks, or crossovers in the U.S. covers scheduled oil changes with filter, tire rotations,and and27-point 27-pointinspections, inspections,according accordingtotoyour yournew newvehicle’s vehicle’srecommended recommendedmaintenance maintenanceschedule, schedule,for foraammaximum aÊ ximumofoffour four service events within 2 years or 24,000 miles, whichever comes first. does not include air filters. extra charge may apply for dual-rear-wheel tire rotations. See participating dealer for other restrictions and complete details. 2 Not valid with all offers. allowance amounts include parts and labor. upfit cash is also available for the transfer of an existing upfit. See dealer for details. take delivery by ÈÉ£/1È. 3 Fully backed by gm. gm accessories permanently installed at the time of new-vehicle delivery are covered under the new-Vehicle limited Warranty. if installed after delivery, coverage on parts and labor is for the balance of the new-vehicle warranty or a minimum of 12 months or 12,000 miles, whichever comes first. gm accessories not requiring installation or purchased over the counter carry a 12-month limited warranty on parts only. does not apply to licensed products. take delivery by ÈÉ£/1È. 4 Requires available Snow plow prep package (VYu) and Snow plow upfit. Snow plow upfit cash good transfer existing snowplow. plow.take takedelivery deliverybybyÈÉ£/1È. 9/30/14. available Snow plow prep package (VYu) and Snow plow upfit. Snow plow upfit cash is is good forfor thethe transfer ofof anan existing snow Requires 5 Adrian Steel van equipment is warranted to be free from defects in material and workmanship, under normal use and service, for a period of 3 years or 36,000 miles, whichever occurs first from the date of delivery to the original retail purchaser when installed by an authorized adrian Steel distribu tor. adrian Steel is a registered trademark of adrian Steel. adrian Steel packages available via transportation fee of $200. See dealer for details. take delivery by ÈÉ£/1È. 6 To qualify, vehicle must be used in the day-to-day operation of the business and not solely for transportation purposes. must provide proof of business. For complete program requirements, including information regarding offers, vehicles, equipment, options, warranties, and ordering, consult your chevrolet dealer or visit gmbusinesschoice.net. take delivery by ÈÉ£É£È. 7 According to to your your vehicle’s vehicle’s recommended recommended maintenance maintenance schedule schedule for for up up to to 22 years years or or 30,000 30,000 miles, miles, whi whichever chevercomes comesfirst. first.does doesnot notinclude includeair airfilters. filters.covers coverssix sixoil oilchanges changesfor forgasoline gasolineengines enginesand andfo foururoiloilchanges changesfor fordiesel. diesel.extra extracharge chargemay mayapply applyfor fordual-rear-wheel dual-rear-wheeltire tirerotations. rotations.See Seeparticipati participatng i dealer for According restrictions and complete details. ©2013 general motors. all rights reserved.

Page 46 • May 21, 2016 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Terex Offers Online Driver Safety Training Courses for Utility Trucks Talbert Manufacturing’s AC3-25-ART, the newest air ramp (Air) tilt series trailer model, features an ultralow load angle of 7 degrees with a 33-in. (84 cm) deck height for optimal view of the equipment and surroundings while hauling.

Talbert Unveils Tilt Trailer Series Talbert Manufacturing launched a new air ramp (Air) tilt series for easy loading of low-clearance equipment, such as soil and asphalt rollers. The series includes the 20-ton (18 t) capacity AC-20-ART and 25-ton (22.6 t) capacity AC3-25ART. The units air controls provide additional operator safety when raising and lowering the trailer for loading, and its low deck height offers a superior view of the equipment and surroundings, according to the manufacturer. “We received several requests for heavy-duty, tilt-deck trailers with a reduced load angle,” said Troy Geisler, Talbert’s vice president of sales and marketing. “Because of that, we developed the ART series as the heavy-haul solution. The trailers provide operators maximum view of the equipment and surroundings and feature the lowest loading height available in the industry.” The series features Talbert’s lowest load angle, 7 degrees, for easily loading and unloading equipment weighing as much as 25 tons. Operators use the trailer’s controls, which uses air power to fill bags near the front of the trailer to raise the deck and lower the ramps to the ground. The air-powered ramps eliminate handling heavy ramps and using cranes or other equipment to position loads. Operators drive equipment over the 38-in. (96.5 cm) wide, high-density Apitong wood-filled ramps and onto the trailer deck. The unit’s wheels rest on the gripped floor plates over the trailer wheels for weight balance. Once the equipment is loaded, operators use the controls to return the ramps to the upright position. The low 8-in. (20 cm) headboard and 33-in. (84 cm) deck height provide operators with and enhanced view of the equipment and surroundings to maximize safe operations. The low deck height also provides additional clearance for bridges and tunnels when transporting tall equipment. Plus, it allows haulers to expand the range of equipment transported while complying with U.S. and Canadian hauling requirements. For additional safety and driver comfort while hauling, an air brake system and hutch spring suspension provide maximum load control. Operators secure loads by using safety chains with hooks that latch to tie-down rings on top of the outside beams. The ART Series trailers come standard with Valspar R-Cure 800 paint in Talbert’s signature red or black. Customers can add the optional Valspar AquaGuard for additional corrosion protection. For more information, call 800/348-5232 or visit www.talbertmfg.com.

Terex added 13 new driver safety training courses for medium-duty utility trucks, part of the company’s Master Mechanic Learning Center, to its suite of online training courses. These web-based modules provide utility fleet professionals with proactive driver training, including mitigating the risk of driving infractions or collisions before they occur, which enables participants to learn safe driving techniques of Terex aerial devices, digger derricks and auger drills at each individual’s own pace, when it is convenient for them. “The Terex Driver Safety Training was developed to help utility truck drivers better understand how to proactively prevent collisions,” said Jason Julius, technical support and training development, Terex Utilities, “as well as monitor and assess others’ driving behaviors, reduce emissions and manage incidents, if they do occur. Each training module takes approximately 15 to 20 minutes to complete, and participants can start and stop their training as necessary.” The 13 driver safety training courses offered by Terex include: • Avoiding Animals and Debris • Avoiding Crashes • Changing Lanes • Diesel Particulate Filter Regeneration • DOT Vehicle Inspections • Driving and Adverse Weather • Highway Driving • Intersections and Right-of-Way • Limited Visibility Conditions • Proactive Driving • Sharing the Road with Others • Speed Management • Vehicle Backing Safety

The Terex Driver Safety Training was developed to help utility truck drivers better understand how to proactively prevent collisions.

The modules engage drivers through a variety of interactive exercises and activities to improve the learning experience. At the end of each module, drivers are tested for comprehension, and when they pass, they will be presented with a certificate of completion. Work-related motor vehicle crashes are one of the leading causes of workplace fatalities, and crashes cost North American employers billions of dollars each year. According to Julius, whether a utility fleet professional is looking to improve driver safety, lower costs or minimize risk exposure, the Terex Driving Safety Training program is an ideal tool to implement as part of a proactive safety program for new hires, existing drivers and high-risk drivers. For more information, visit http://www.terex.com/utilities/ en/servicesupport/TerexUtilitiesOnlineUniversity/index.htm. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Subframe Scissor Hoist From Rugby

Rugby Manufacturing’s SR-4016 “The SR-4016 was designed with hoist that would reduce installation subframe scissor hoist for trucks is up both the installer and customer in time, reduce shop inventory, and still to 20 percent lighter than comparable mind,” said Jeff Duchscher, general provide the quality and durability our hoists, providing greater fuel efficiency manager of Rugby Manufacturing. customers demand. The SR-4016 does and payload capacity. It is all of this, and weighs less available for a wide variety than a traditional Rugby of work trucks with body hoist.” lengths from 8- to 14-ft. (2.4 As with all Rugby hoists, to 4.2 m). each SR-4016 subframe scisThe SR-4016 model was sor hoist is lifecycle tested at designed as an alternative full-rated capacity (7.7 to 17 to two popular Rugby subton range). It is available with frame scissor hoists, the a single or double-acting elecRugby HR520 and the tric pump or a direct-mount HR540. Dealers can now gear pump. Each SR-4016 stock one hoist instead of comes standard with a new two, reducing inventory integrated body prop. requirements. The SR-4016 The Rugby SR-4016 truck hoist with integrated body For more information, call also delivers a greater lift- prop. 701/776-5722. ing capacity than the (This story also can be HR520 and can be installed 10 to 15 “Rugby used our more than 47 years of found on Construction Equipment (This story also can be found on Construction Equipment percent faster, according to the manu- experience in hoist engineering and Guide’s Web site at www.construcfacturer. extended life cycle testing to develop a tionequipmentguide.com.) Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 21, 2016 • Page 47

2005 Ram Powerwagon 2500

2014 Ram Service Body

Crew Cab 4x4 MSRP $51,860

2004 Ford Cube Truck

Crew Cab, Gas only 6.4 Hemi, only 13,000 Mi.

Spring Special $43,624*

Spring Special $6,488*

Spring Special $38,988*

SNOW PLOW TRUCKS

Ram 1500 Sport Crew 4x4 MSRP $56,940

Spring Special $47,915*

Spring Special $51,476*

Spring Special $48,698*

Diesels Here

Promaster

Ram 5500

MSRP $34,965

6.4L Gas, Dump bed truck

Promaster City

Spring Special $26,008*

Spring Special $64,688*

Spring Special $28,195*

NOW OPEN Fury Ram Truck Center

Chrysler Corp. Commercial Dealer in Minnesota

18 Cabs and Chassis in Stock More Coming!

RAM H.D. HEADQUARTERS The fast lane for small business.

If we don’t have it, we’ll build it for you!

Fury Ram Truck Center, Lake Elmo, Minnesota 651-777-1316 • Visit us at furymotors.com

We Deliver! 32 Promasters Ready to Go!

* Pricing represents all Denver business center rebates deducted!

Page 48 • May 21, 2016 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

The ‘Next Generation’…

Landoll Unveils 900D Series Traveling Tail Trailer Equipped With ‘H.O.S.S.’

Ditch Witch of North Dakota AIS Construction Equipment Corporation 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000 Fax: 517-321-4191 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449

1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 Fax: 701-282-3636 2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551 Fax: 701-663-0692

65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311

The 900D traveling tail trailer is equipped with a new hydraulic operating system, nicknamed “H.O.S.S.” and an all-new Grote lighting package.

Landoll Corporation Trailer Division has unveiled the “Next Generation Landoll” (NGL) 900D Series traveling tail trailers. The 900D traveling tail trailer is equipped with a new hydraulic operating system, nicknamed “H.O.S.S.” and an all-new Grote lighting package. The traveling tail has been transformed with increased operational speed and the dynamic “high visibility” lighting package that increases visual awareness and driver safety during night operations. Overall, operational efficiencies, less heat buildup and noise reduction, along with improved driver safety are key points in the Next Generation trailer. Operational speed increases dramatically with the new H.O.S.S. system operating at 20 gpm. “For several years we have needed to clean up the system

to make it more user friendly,” said Gary Dwerlkotte. The control panel is located at chest height, encouraging ergonomic, improving visual site lines, and now allows other optional features to be installed directly onto the control panel. Brad Bergman added that “this better technology and design simplifies the system.” “Listening to the customer always leads us to how or what we need to improve,” said Jim Ladner. “H.O.S.S. will not only increase operational efficiency, but also keep the customer safe by getting them out of the danger zone quicker.” For more information, visit http://www.landoll.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Crysteel Reintroduces Two Series of Class 8 Bodies: Paradox, Raptor Crysteel Manufacturing recently announced the reintroduction of the Paradox and Raptor series of Class 8 dump bodies. These Class 8 bodies are made from hi-tensile steels, and come in standard and heavy duty models. The Paradox and heavier duty Paradox RoxBox feature a square body style, while the Raptor and heavier duty RipRaptor bodies are elliptical. Both lines are available in body sizes ranging from 14 ft. to 21 ft. 6 in. (4.2 to 6.6 m) with capacities from 13 to 26.9 cu yds. (9.9 to 20.5 cu m). According to Crysteel General Manager Joe Paulsen, customer demand was behind the reintroduction. “These products continue to have a loyal following in the industry, and

4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 Fax: 248-437-9750

over the years we continued to receive requests and inquires for them. So we worked diligently with our Crysteel distributors to reestablish these bodies in our product mix, and we’re very excited to be able to offer both the

Paradox and Raptor series of dump bodies once more,” Paulsen said. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

9052 Marshall Road Cranberry Township, PA 16066 724-742-2844 888-DITCHWITCH Fax: 724-742-2877 www.ditchwitchPA.com

www.aisequip.com

1929 E. Madison Ave. Mankato, MN 56001 507-387-7376 Fax: 507-387-7399

949 3rd Ave. Windom, MN 56101 507-678-2752

Crysteel Manufacturing recently announced the reintroduction of the Paradox and Raptor series of Class 8 dump bodies.

3660 Interchange Road Columbus, OH 43204 614-443-9751 888-DITCHWITCH Fax: 614-443-9219 www.ditchwitchOH.com

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 21, 2016 • Page 49

6140 Highway 10 NW Anoka, MN 55303 763-323-1720 888-448-5266 Fax: 763-422-3949

1015 Highway 212 West Norwood Young America, MN 952-467-2182 Fax: 952-467-3259

3021 West 133rd Shakopee, MN 55379 952-445-6310 Fax: 952-496-0263 23580 Highway 55 Loretto, MN 55357 763-479-8200 Fax: 763-479-8201

13725 Main Street Rogers, MN 55374 763-428-4107 Fax: 763-428-2700 www.mnequipmentsolutions.com

901 Parker Ave. West PO Box 26 Dassel, MN 55325 888-679-4857 320-275-2737 1515 West Litchfield Ave. Willmar, MN 56201 877-484-3211 320-235-3672 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 844-262-2281 320-240-2085 www.farmriteequip.com

www.westsidetractorsales.com 1400 W. Ogden Ave. Naperville, IL 630-355-7150

600 Walnut Ct Rockdale, IL 815-730-9011

7355 East 30th St. Indianapolis, IN 46219 317-544-3411

150 W. 162 St. Route 6 South Holland, IL 708-331-6362

2170 South Yost Ave. Bloomington, IN 47403 812-333-9677 Fax: 812-333-9731

3021 South 460 East Lafayette, IN 47905 765-477-6933 Fax: 765-448-9038

3120 Congressional Parkway Fort Wayne, IN 46825 260-482-8576 Fax: 260-483-4057

25166 State Road 2 South Bend, IN 46619 574-232-1461 Fax: 574-233-3324

3110 Prairie Rd. Rockford, IL 815-961-3160 1560 North Old Rand Rd. Wauconda, IL 847-526-7700

Page 50 • May 21, 2016 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 21, 2016 • Page 51

Page 52 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 53

A Authorized uthorized D Doosan oosan D Dealers ealers

ILLINOIS ILLINO IS

K KENTUCKY ENTUCK Y

LLuby uby E Equipment quipment

Bobcat Bobcat of of Bowling Bowling G Green re een

Q Quincy uincy

B Bowling owling G Green reen

2 217-222-5454 17-222-5454

2 270-842-4253 70-842-4253

www.lubyequipment.com w w w.lubyequipment.com

w www.bgbobcat.com w w.bgbobcat.com

LLuby uby E Equipment quipment

G Gibson ibson M Machinery, achinery, LLLC LC

C Cape ape G Girardeau irardeau

C Cleveland leveland

5 573-334-9937 73-334-9937

440-439-4000 440-439-4000 8 800-843-1205 00-843-1205

FFenton enton 6 636-343-9970 36-343-9970

w www.gibsonmachinery.com w w.gibsonmachiner y.com

w www.lubyequipment.com w w.lubyequipment.com

S SOUTH OUTH DAKOTA DAKOTA

INDIANA INDIANA

MICHIGAN MICHIGAN

B&WE Equipment quipment

Carleton Ca arleton E Equipment quipment Co., Co., IInc. nc.

NEBRASKA NEBR ASK A

FFort ort W Wayne ayne

C Chesterfield hesterfield

Bobcat Bobcat o off Om Omaha aha

260-422-0945 260-422-0945 800-242-4819 800-242-4819

586-463-3333 586-463-3333

Omaha Omaha

G Grand rand R Rapids apids

4 402-895-6660 02-895-6660 8 888-732-3198 88-732-3198

w www.bandwequipment.com w w.bandwequipment.com

Bobcat Bobcat o off E Evansville vansville E Evansville vansville 812-422-8200 812-422-8200

R Ronson onson Equipment Equipment Co., Co., LL LLC C

6 616-877-3388 16-877-3388 269-343-2943 269-343-2943 888 888-380-6420 -380-6420

N NORTH OR T H D DAKOTA AKOTA

Saginaw Saginaw

Bobcat Bobcat o off Devils Devils LLake ake

9 989-777-6666 89-777-6666

D Devils evils La Lake ke

w www.carletonequipment.com w w.carletonequipment.com

70 701-662-5331 1-662-5331

d doosan.ronsonequipment.com oosan.ronsonequipment.com

M MINNESOTA INNESOTA LLano ano EEquipment, quipment, IInc. nc.

IIOWA OWA B Brown’s rown’s Heavy Heavy E Equipment, quipment, IInc. nc. Am Ames es 515-232-8456 515-232-8456 800-723-5460 800-723-5460 w www.brownsheavyequipment.com w w.brownsheav yequipment.com

RTL RTL E Equipment, quipment, IInc. nc. G Grimes rimes

A Anoka noka

605-348-7438 605-348-7438 8 800-658-3047 00-658-3047

S Sioux ioux FFalls alls 605-336-0411 605-336-0411 800-456-4005 800-456-4005 w www.dieselmachinery.com w w.dieselmachiner y.com

WISCONSIN WISCONSIN Bobcat Bobcat of of Grand Grand Forks Forks G Grand rand FForks orks 701-772-5006 701-772-5006

S Swiderski widerski EEquipment, quipment, IInc. nc. A Antigo ntigo 7 715-623-4668 15-623-4668

w www.goironhide.com w w.goironhide.com

S Shakopee hakopee

Bobcat Bobcat o off Williston Willisto on

Thorp Thorp

Williston Williston

7 715-669-5255 15-669-5255

9 952-445-6310 52-445-6310 8 877-753-6100 77-753-6100 w www.lanoequip.com w w.lanoequip.com

M MISSOURI ISSOURI Bobcat Bo bcat of of St. St. Louis Louis

Sw Swisher isher

5 573-886-9435 73-886-9435

www.rtlequipment.com w w w.r tlequipment.com

RUN STRONG.

Rapid Rapid City City

7 763-323-1720 63-323-1720 888-448-5266 888-448-5266

5 515-986-0262 15-986-0262 8 800-373-3916 00-373-3916 3 319-857-4045 19-857-4045 8 800-373-3916 00-373-3916

Aberdeen Aberdeen 605-725-4364 605-725-4364 888 888-762-6312 -762-6312

w www.goironhide.com w w.goironhide.com

Lowell Lowell 2 219-696-5680 19-696-5680

b bobcat.omaha-tractor.com obcat.omaha-tractor.com

Kalamazoo Kalamazoo

D Diesel iesel M Machinery, achinery, IInc. nc.

Columbia Columbia

7 701-572-5050 01-572-5050 w www.goironhide.com w w.goironhide.com

OHIO OHIO Bo Bobcat bcat E Enterprises, nterprises, IInc. nc.

Waupaca W aupaca 7 715-258-3266 15-258-3266

Wausau Wausau 7 715-623-4668 15-623-4668 www.swiderskiequipment.com w w w.swiderskiequipment.com

H Hamilton am

Valley Valley P Park ark

513-874-8945 513-8 8 800-4BOBCAT 00-4

6 636-225-2900 36-225-2900 8 800-782-0854 00-782-0854

Reynoldsburg Reyno

w www.bobcatofstl.com w w.bobcatofstl.com

Mosinee Mosinee 7 715-675-2391 15-675-2391

6 614-876-1116 14-8 8 800-4BOBCAT 00-4 w www.bobcat-ent.com w w.bob

Want to run strong equipment? Run Doosan. Request FREE product information:

DoosanEquipment.com/Excavator21 Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2016 Doosan Infracore Construction Equipment America. All rights reserved. | 49040-4

Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2016 Doosan Infracore Construction Equipment America. All rights reserved. | 49040-4

Page 52 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 53

A Authorized uthorized D Doosan oosan D Dealers ealers

ILLINOIS ILLINO IS

K KENTUCKY ENTUCK Y

LLuby uby E Equipment quipment

Bobcat Bobcat of of Bowling Bowling G Green re een

Q Quincy uincy

B Bowling owling G Green reen

2 217-222-5454 17-222-5454

2 270-842-4253 70-842-4253

www.lubyequipment.com w w w.lubyequipment.com

w www.bgbobcat.com w w.bgbobcat.com

LLuby uby E Equipment quipment

G Gibson ibson M Machinery, achinery, LLLC LC

C Cape ape G Girardeau irardeau

C Cleveland leveland

5 573-334-9937 73-334-9937

440-439-4000 440-439-4000 8 800-843-1205 00-843-1205

FFenton enton 6 636-343-9970 36-343-9970

w www.gibsonmachinery.com w w.gibsonmachiner y.com

w www.lubyequipment.com w w.lubyequipment.com

S SOUTH OUTH DAKOTA DAKOTA

INDIANA INDIANA

MICHIGAN MICHIGAN

B&WE Equipment quipment

Carleton Ca arleton E Equipment quipment Co., Co., IInc. nc.

NEBRASKA NEBR ASK A

FFort ort W Wayne ayne

C Chesterfield hesterfield

Bobcat Bobcat o off Om Omaha aha

260-422-0945 260-422-0945 800-242-4819 800-242-4819

586-463-3333 586-463-3333

Omaha Omaha

G Grand rand R Rapids apids

4 402-895-6660 02-895-6660 8 888-732-3198 88-732-3198

w www.bandwequipment.com w w.bandwequipment.com

Bobcat Bobcat o off E Evansville vansville E Evansville vansville 812-422-8200 812-422-8200

R Ronson onson Equipment Equipment Co., Co., LL LLC C

6 616-877-3388 16-877-3388 269-343-2943 269-343-2943 888 888-380-6420 -380-6420

N NORTH OR T H D DAKOTA AKOTA

Saginaw Saginaw

Bobcat Bobcat o off Devils Devils LLake ake

9 989-777-6666 89-777-6666

D Devils evils La Lake ke

w www.carletonequipment.com w w.carletonequipment.com

70 701-662-5331 1-662-5331

d doosan.ronsonequipment.com oosan.ronsonequipment.com

M MINNESOTA INNESOTA LLano ano EEquipment, quipment, IInc. nc.

IIOWA OWA B Brown’s rown’s Heavy Heavy E Equipment, quipment, IInc. nc. Am Ames es 515-232-8456 515-232-8456 800-723-5460 800-723-5460 w www.brownsheavyequipment.com w w.brownsheav yequipment.com

RTL RTL E Equipment, quipment, IInc. nc. G Grimes rimes

A Anoka noka

605-348-7438 605-348-7438 8 800-658-3047 00-658-3047

S Sioux ioux FFalls alls 605-336-0411 605-336-0411 800-456-4005 800-456-4005 w www.dieselmachinery.com w w.dieselmachiner y.com

WISCONSIN WISCONSIN Bobcat Bobcat of of Grand Grand Forks Forks G Grand rand FForks orks 701-772-5006 701-772-5006

S Swiderski widerski EEquipment, quipment, IInc. nc. A Antigo ntigo 7 715-623-4668 15-623-4668

w www.goironhide.com w w.goironhide.com

S Shakopee hakopee

Bobcat Bobcat o off Williston Willisto on

Thorp Thorp

Williston Williston

7 715-669-5255 15-669-5255

9 952-445-6310 52-445-6310 8 877-753-6100 77-753-6100 w www.lanoequip.com w w.lanoequip.com

M MISSOURI ISSOURI Bobcat Bo bcat of of St. St. Louis Louis

Sw Swisher isher

5 573-886-9435 73-886-9435

www.rtlequipment.com w w w.r tlequipment.com

RUN STRONG.

Rapid Rapid City City

7 763-323-1720 63-323-1720 888-448-5266 888-448-5266

5 515-986-0262 15-986-0262 8 800-373-3916 00-373-3916 3 319-857-4045 19-857-4045 8 800-373-3916 00-373-3916

Aberdeen Aberdeen 605-725-4364 605-725-4364 888 888-762-6312 -762-6312

w www.goironhide.com w w.goironhide.com

Lowell Lowell 2 219-696-5680 19-696-5680

b bobcat.omaha-tractor.com obcat.omaha-tractor.com

Kalamazoo Kalamazoo

D Diesel iesel M Machinery, achinery, IInc. nc.

Columbia Columbia

7 701-572-5050 01-572-5050 w www.goironhide.com w w.goironhide.com

OHIO OHIO Bo Bobcat bcat E Enterprises, nterprises, IInc. nc.

Waupaca W aupaca 7 715-258-3266 15-258-3266

Wausau Wausau 7 715-623-4668 15-623-4668 www.swiderskiequipment.com w w w.swiderskiequipment.com

H Hamilton am

Valley Valley P Park ark

513-874-8945 513-8 8 800-4BOBCAT 00-4

6 636-225-2900 36-225-2900 8 800-782-0854 00-782-0854

Reynoldsburg Reyno

w www.bobcatofstl.com w w.bobcatofstl.com

Mosinee Mosinee 7 715-675-2391 15-675-2391

6 614-876-1116 14-8 8 800-4BOBCAT 00-4 w www.bobcat-ent.com w w.bob

Want to run strong equipment? Run Doosan. Request FREE product information:

Page 54 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ditch Witch Mid-States www.ditchwitchmidstates.com Columbus, OH 614-443-9751

Louisville, KY 502-543-3309

Lexington, KY 859-263-5050

Pittsburgh, PA 724-742-2844

Spending Shows Construction Public Works Bill Defeated Industry Rapidly Growing PLAN from page 1

BUDGET from page 1

Private nonresidential construction spending increased 0.7 percent for the month and 9.3 percent from a year earlier. Simonson observed that all but one segment increased from 12 months before. The largest private nonresidential segment in March was manufacturing construction, which rose 2.2 percent for the month but dropped 2.0 percent year-over-year. The next-largest segment, power (including oil and gas pipelines), lost 1.8 percent for the month but gained 2.0 percent for the year. Public construction spending dipped 1.9 percent from a month before but is still up 6.7 percent from 12 months earlier. The biggest public segment — highway and street construction — was up 0.4 percent for the month but is up 18.8 percent year-overyear, as new federal surface transportation investments enacted last year began to impact demand, Simonson noted. Association officials said the new construction spending figures reinforce anec-

dotal reports that the industry continues to grow amid robust demand for most types of construction services. But officials warned that labor shortages are likely to become even more severe as construction firms continue to expand unless federal, state and local officials act on the measures outlined in the association’s Workforce Development Plan. “The new spending data, combined with recent employment reports, make it clear that the construction industry is growing faster than the broader U.S. economy,” said Stephen E. Sandherr, the association’s chief executive officer. “But unless firms have enough workers to keep pace with demand, construction schedules are likely to slow as firms are forced to cope with labor shortages.” For more information, visit www.agc.org. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

ing priorities. Its unexpected failure on the Senate floor adds to that pile of unsettled work as the Legislature nears the end of the session. “It just doesn’t seem like we’re on a path where we’re going to get anything done,’’ Senate Majority Leader Tom Bakk said. “We may end up going home this session without a bonding bill.’’ Those bills often play a critical role in end-of-session negotiations by getting individual members on board with construction projects in their districts. But Republicans in the Senate objected to the size of the plan, clocking in at $1.8 billion of construction after adding in some money from other funds. A GOP-led attempt to cut the price tag in half failed. “How can we get out of a session with a bonding bill? I think we all want that,’’ said Sen. David Senjem, R-Rochester. “$1.8 billion is probably not where we want to be.’’ GOP leaders in the House have said they’ll put together a $600 million bonding bill, but have not yet released any details. Democrats in that chamber have vowed not to support it, arguing it doesn’t go far enough to meet the state’s infrastructure needs. Despite its failure on the Senate floor,

“It just doesn’t seem like we’re on a path where we’re going to get anything done.’’ Tom Bakk Senate Majority Leader

Bakk said Democrats likely wouldn’t trim it down and try again. Rather, he faulted Republican lawmakers for not approving the bill and said it hints at a prospect that Gov. Mark Dayton has raised — that the Legislature will accomplish nothing this session. Senate Minority Leader David Hann scoffed at that suggestion and said it’s up to majority Democrats to come back with a smaller bill to gain GOP support. “We need to get serious,’’ the Eden Prairie Republican said. “There’s a lot of room to negotiate.’’ (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

SECTION

Attachments Pages 55-58

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

For Excavators...

Doosan’s New Power Tilting Coupler Allows for 180 Degrees of Movement The new power tilting coupler is approved for Doosan excavators: the DX63-3 compact model; DX140LC-5 through DX255LC-5 crawler models; and DX140W-5 through DX210W-5 wheel models. Hilti X-Change module (X-CM) core bits can be retipped right on the job site in just a few minutes using only a simple screwdriver.

Hilti X-CM Core Bits Feature Easy Removal

Doosan’s new power tilting coupler, provides increased excavator flexibility, versatility and precision when digging trenches, general excavation applications and final grading tasks. The new power tilting coupler is approved for Doosan excavators: the DX63-3 compact model; DX140LC-5 through DX255LC-5 crawler models; and DX140W-5 through DX210W-5 wheel models. With the new coupler, Doosan excavator operators can angle a trenching or ditching bucket 67 degrees left and right for up to 134 degrees of flexibility. Excavator operators can save time when using the coupler because they will not have to reposition the excavator as frequently while working, or stop to change attachments to perform certain

tasks, according to the manufacturer. The Doosan power tilting coupler provides precision while digging and can work under or around objects, such as an underground pipe, to complete excavating tasks. Additionally, the coupler can eliminate the need for multiple attachments on a job site. This can be most beneficial for operators working in general excavation, underground utility, landscaping and grading, and erosion control applications. In demolition applications, the ability to tilt a breaker attachment can help excavator operators reach concrete without repositioning the machine. For more information, visit DoosanEquipment.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Hilti X-Change module (X-CM) core bits can be re-tipped right on the job site in just a few minutes using only a simple screwdriver. Simply replace a worn X-CM module with a new module instead of replacing the entire core bit. Hilti X-CM core bits offer contractors additional productivity by enabling fast and easy core removal and fast bit removal in the event a bit becomes stuck in the concrete. Contractors will find having one barrel and three X-CM modules is comparable to three complete bits, and since replacing a module is less expensive than buying an entire new bit, it is more cost effective, according to the manufacturer. Also, modules are easier to store and transport than complete bits, giving you the ability to always have a backup. The LCS X-CM module provides best in class speed while wet coring and users can switch to dry hand held coring in un-reinforced masonry easily by changing to the LM module. The LCL X-CM module offers best in class life in wet coring, according to the manufacturer. Available in a wide range of diameters from 2 to 8 in. (5 to 20 cm), the Hilti X-CM module retips, renews and restores core bit life. For more information, call 800/879-8000 or visit www.us.hilti.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 56 • May 21, 2016 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Vacuworx Offers Safer Way to Handle Concrete Barriers Highway construction projects can be particularly challenging, especially when space is limited, roadways are crowded and time is short. Time and budget constraints make it necessary to get the work done faster. Traffic-heavy construction locations make safety a priority. To meet these jobsite demands, Vacuworx introduces the new HL Series hydraulic barrier lifters — a smarter way to handle concrete barriers. Vacuworx has always worked closely with customers to identify needs and develop new products to serve them. The traditional method of moving concrete road barriers with slings and chains is slow and lacks control. Having workers walk with the barrier to balance and position it puts them in harm’s way. So Vacuworx listened to customers who wanted a faster, safer way to do the job and created the new HL Series hydraulic barrier lifters. Designed for use with a variety of equipment, including excavators and backhoes, the HL Series lifters connect easily and work with the host’s hydraulic system. Elastomer grips provide superior performance with full surface contact without damaging material. It is equipped with a hydraulic lock for safety to prevent loss of

1985! e c n i S

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com

Designed for use with a variety of equipment, including excavators and backhoes, the HL Series lifters connect easily and work with the host’s hydraulic system. Elastomer grips provide superior performance with full surface contact without damaging material. It is equipped with a hydraulic lock for safety to prevent loss of load if hydraulic pressure is lost.

load if hydraulic pressure is lost. With 360 degree rotation, the HL Series is perfect for maneuvering in confined spaces during road, bridge and highway applications. Precision handling capabilities and wireless remote operation from the cab of the host machine makes loading, unloading and installation fast and easy — without the need to have someone guide the barrier on the ground every step of the way. In addition, environmentally friendly Vacuworx hydraulic lifting systems produce near zero noise and air pollution, providing the ideal solution for construction sites within city limits or with strict emission guidelines. The HL B1 is designed to lift concrete road barriers up to 6,000 lb. (2,721 kg) and 12 ft. (3.6 m) long. The HL B2 can handle barriers up to 16,000 lb. (7,257 kg) and 30 ft. (9 m) long. They are the ideal solution for construction contractors, government authorities, security agencies and military personnel tasked with the fast and efficient moves, lifts or installations of concrete road barriers. Quick-couplers are available for virtually all host machines. The Vacuworx commitment to safety ensures that the HL Series hydraulic barrier

With 360 degree rotation, the HL Series is perfect for maneuvering in confined spaces during road, bridge and highway applications. lifters meet or exceed all global safety and engineering standards, including OSHA, ISO, ASME and CE. For more information, call 918/259-3050 or visit vacuworx.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • May 21, 2016 • Page 57

CUSTOM HYDRAULIC KITS TO OPERATE ATTACHMENTS FOR EXCAVATORS & TRACTOR-LOADER-BACKHOES

ENGINEERED TO PERFORM DURABLE BY DESIGN ypicall .200” wall thickness

• Kits to operate most any attachment • Welded tube ends for maximum strength & durability • OEM style ORFS or CD62 4-bolt flange • Higher safety standards • Efficient designs with fewer connections • Conversion and upgrade kits available for OEM factory kits

www.hctkits.com www.hctkits.com • 888.603.0080 • sales@hctkits.com

Page 58 • May 21, 2016 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Crawler Excavator…

u d mmy

Don’t be a

At a glance, snow pushers look a lot alike. Don’t be snowed.

Doosan Introduces Line of Buckets for Harsh Conditions Doosan introduces a new line of severe-duty buckets for crawler excavator customers needing a bucket that can handle abrasive materials in heavy digging and loading applications. Doosan severe-duty buckets are approved for use with Doosan DX140LC-5 through DX530LC-5 crawler excavators. They are available in a pin-on or wedge-lock style. The severe-duty bucket sizes range from 18-in. (45.7 cm) wide for the smaller DX140LC-5, to 72-in. (182.8 cm) wide for larger Doosan excavators, such as the DX530LC-5. There are a variety of sizes and capacities in between, to best match the severe-duty bucket to the corresponding crawler excavator. Abrasive-Resistant Material Doosan severe-duty buckets are made with abrasiveresistant material for added protection and strength when digging in loose rock, or pit and quarry operations. The side cutters, shell bottom and side wear plates, and a weld-on wear shroud are made out of abrasive-resistant material. Reinforcing gussets also have been added to strengthen the machine-fitting joint on the bucket.

If it’s not the original Arctic Sectional Sno-PusherTM, you risk damage and injury.

Wear Pads Front wear pads were added to the severe-duty buckets for extra protection from rocks and irregular materials.

Arctic’s combination of components — the patented Slip-HitchTM and moldboard design, the spring-loaded trip edges, steel cutting edges, mechanical side panels and polyurethane mounting blocks — aggressively play it safe. The Sectional Sno-PusherTM easily moves over hard objects under the snow, keeping your plow intact and your operator inside the cab.

Thicker Cutting Edge, Rolled Wear Strap Doosan excavator customers needing to easily dig through tough materials such as hard rock will appreciate a new, durable, abrasive-resistant cutting edge, according to the manufacturer. Standard on the new Doosan severe-duty buckets is an abrasive-resistant wear strap. For more information, visit DoosanEquipment.com.

Don’t be a crash test dummy. Choose smart. Choose Arctic.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Doosan severe-duty buckets are approved for use with Doosan DX140LC-5 through DX530LC5 crawler excavators. They are available in a pin-on or wedgelock style.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 59

www.westsidetractorsales.com 7355 East 30th St. Indianapolis, IN 46219 (317) 544-3411 Fax: (317) 544-3420 Bloomington, IN (812) 333-9677 Fax: (812) 333-9731 Fort Wayne, IN (260) 482-8576 Fax: (260) 483-4057

www.dieselmachinery.com

LaFayette, IN (765) 447-6933 Fax: (765) 448-9038

4301 North Cliff Ave. Sioux Falls, SD 57104 (888) 753-8907

South Bend, IN (574) 232-1461 Fax: (574) 233-3324

3801 North Deadwood Ave. Rapid City, SD 57702 (800) 658-3047 39288 133rd St. Aberdeen, SD 57401 (888) 484-6312

www.vlpco.com 4100 Gardner Ave. Kansas City, MO 64120 (800) 878-9290 (816) 241-9290 Joplin (800) 878-8223 (417) 781-8222 Springfield (800) 955-2729 (417) 887-2729

Wichita (800) 878-3346 (316) 838-3346 Topeka (800) 878-4345 (785) 267-4345 Garden City (800) 511-1435 (620) 275-1996

www.brookstractor.com Sun Prairie 1900 W. Main St. P. O. Box 9 Sun Prairie, WI 53590 608- 837-5141 Fax: 608-837-4012 Milwaukee 12101 W. Silver Spring Dr. Milwaukee, WI 53225 414- 462-9790 Fax: 414-462-7242 De Pere 1031 Lawrence Dr. De Pere, WI 54115 920- 336-5711 Fax: 920-336-6405

West Salem 451 W. Avenue N. West Salem, WI 54669 608- 786-2644 Fax: 608-786-2206 Plover 5429 Prairie Dr. Plover, WI 54467 715- 254-2777 Fax: 715-254-2799 Coming 2016 Mount Pleasant 1609 SE Frontage Rd. Mt. Pleasant, WI 53177

Page 60 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WE DO MORE THAN DESIGN EQUIPMENT.

WE POWER YOUR SUCCESS.

Whether you are looking for products with the llatest atest ttechnology echnolog y or you want to have your old machine rremanufactured, emanuffactured, Doosan Por table Power can help you achieve success. Focused on ccustomer ustomer ssatisfaction atisffaction and product solutions, our de dealer aler netw network ork is the largest nationwide network in the ind industr y.

CONTTACT YOUR LOCALL DEALER DEAL TODAY. Aspen Equipment Co.

McAllister Equipment Co.

www.aspenequipment.com 9150 Pillsbury Ave. S Bloomington, MN 55420 (952) 888-2525 Omaha, NE (402) 894-9300

www.mcallisterequipment.com 150 E. North Ave. Villa Park, IL 60181 (630) 530-7600 Alsip/Chicago, IL (708) 389-7700 E. Peoria, IL (309) 694-4455 Rockford, IL (815) 227-0555 Springfield, IL (217) 789-0351

DoosanPortablePower.com | 800.633.5206

Sa Sales. les. P Parts. arts. Service. Service.

Roland Machinery Co. www.rolandmachinery.com Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252 Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Carterville, IL (618) 985-3399 East Peoria, IL (309) 694-3764

DePere, WI (920) 532-0165 DeForest, WI (608) 842-4151 Eau Claire, WI (715) 874-5400 Franksville, WI (262) 835-2710 Schofield, WI (715) 355-9898 Escanaba, MI (906) 786-6920

Central Power Systems & Services www.cpower.com 9200 Liberty Drive Liberty, MO 60468 (816) 781-8070 Springfield, MO (417) 865-0505 Wichita, KS (316) 943-1231 Great Bend, KS (620) 792-1361 Liberal, KS (620) 624-7274 Salina, KS (785) 825-8291 Colby, KS (785) 462-8211

Brandeis Machinery & Supply Company www.brandeismachinery.com 1801 Watterson Trail Louisville, KY 40299 (502) 491-4000 Corbin, KY (606) 528-3700 Lexington, KY (859) 259-3456 Paducah, KY (270) 444-8390

Stanville, KY (606) 478-9201 Evansville, IN (812) 425-4491 Fort Wayne, IN (260) 489-4551 Indianapolis, IN (317) 872-8410

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 61

The GMK6300L all-terrain crane At Grove, we provide high-performance features, reliable 24/7 support and a quality product lineup – because cranes are all we do. With 17 all-terrain models ranging from 40-450 USt, we’ve got a crane to handle any jobsite. Tilt cab

Featured is the GMK6300L – its 350 USt capacity, 263 ft. boom, Allison transmission and MEGATRAK™ suspension system are ideal for a wide range of applications and will keep you working.

MEGATRAK™

Need Financing? Removable outrigger box

For more information, visit www.manitowoccranes.com

Kirby Smith Machinery Inc.

Cleveland Crane & Shovel Sales, Inc.

12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700 6715 W. Reno Ave. Oklahoma City, OK 73127 405/495-7820 8320 Ruby Ave. Kansas City, KS 913/850-6300 877/851-5729

26781 Cannon Road Cleveland, OH 44146 440/439-4749 800/362-8494 Fax: 440/439-2177 aforepaugh@ craneandshovel.net www.craneandshovel.net

Walter Payton Power Equipment LLC 930 W 138th Street Riverdale, IL 60827 708/656-7700 Fax: 708/532-1273 25210 Brest Road Taylor, MI 48180 734/947-9250 Fax: 734/947-9260 2832 Fitzgerald Rd. Louisville, KY 40216 877/847-3434

920 S State Road 39 Lebanon, IN 46052 765/482-4145 Fax: 765/482-4928 3400 Claremont Avenue Evansville, IN 47712 812/422-6912 Fax: 812/422-6982 www.wppecrane.com

Aspen Equipment Company

American State Equipment Co. Inc.

www.aspenequipment.com 1525 S.E. Cortina Dr. Ankeny, IA 50021 515/965-1000 Fax: 515-965-1790 11475 S. 153rd St. Omaha, NE 68138 402/894-9300 Fax: 402-894-9302

www.amstate.com 2055 South 108th Street Milwaukee, WI 53227 414/541-8700 2400 North 14th Avenue Wausau, WI 54401 800/242-7113 13915 Lake Drive Columbus, MN 55025 651/464-0996 2385 Becks Road Duluth, MN 55810 218/260-0581

Page 62 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Efficiency Production to Host Annual Municipal Safety Day CONTINENTAL EQUIPMENT CORP. www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000 517/321-4191 Fax

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 502/499-3195 Fax Evansville, IN 812/425-4491 812/425-1171 Fax Corbin, KY 606/528-3700 606/528-9014 Fax Lexington, KY 859/259-3456 859/254-0783 Fax Stanville, KY 606/478-9201 606/478-9208 Fax Paducah, KY 270/444-8390 270/575-4907 Fax Indianapolis, IN 317/872-8410 317/872-8417 Fax Ft.Wayne, IN 260/489-4551 260/489-1620 Fax

More than 80 DPW and Water Department workers from more than 40 Michigan municipalities attended last year’s ninth annual Municipal Safety Day, hosted by Efficiency Production.

In conjunction with the Michigan Rural Water Association (MRWA), Michigan CAT, Titan Equipment, F.D. Lake and Jack Doheny Company, Efficiency Production Inc. is set to host its 10th annual Municipal Safety Day on June 2 from 8 a.m. to 4 p.m. at Efficiency Production’s corporate headquarters in Mason, Mich. As in the past, participants at Municipal Safety Day will qualify for MDEQ Continuing Education Credits. The agenda for Municipal Safety Day includes: • Confined Space Training, presented by Jack Doheny Company • MIOSHA Standards for Soil Classification, presented by Efficiency Production • Backhoe Operator Training, presented by Michigan CAT • Proper Rigging Safety, presented by F.D. Lake • Hydro Excavation Safety, presented by Jack Doheny Company • Aerial Lift Safety, presented by Titan Equipment • Trench Protection Systems, presented by Efficiency Production • Free barbeque lunch and raffle

Bob Pflibsen, Jack Doheny, operates the nozzle control unit as part of pipeline maintenance training at the 2015 Municipal Safety Day.

There is no cost to attend the Municipal Safety Day. “Municipal Safety Day is designed specifically for Michigan’s public works personnel,” said Mike Ross, Efficiency Production’s national training coordinator. “These are the workers who routinely need to perform duties that cross a spectrum of potentially dangerous situations. Our goal is to educate DPW workers on the entirety of excavation and construction safety.” New for 2016, there will be many

municipal-relevant safety and construction equipment on display from several vendors, including Purity Gas, Municipal Supply Co., Northern Concrete Pipe, Inc., First Due Fire Supply and Capital Equipment. To register for Municipal Safety Day, call 989/539-4111 at least two days before the event. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 913/371-3870 Fax Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 63

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898

GENERAL EQUIPMENT & SUPPLIES www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 701/364-2190 Fax 905 20th Avenue SE Minot ND, 58701 800/852-0479 3500 Apple Creek Road Bismarck, ND 58504 800/279-4437 4082 2nd Ave. W Williston, ND 58801 701/572-0570

Page 64 • May 21, 2016 • www.constructionequipmentguide.com • cOnstrUctIOn eQUIPMent gUIDe

MINNESOTA IOWA ZIegler ZIEGLERcAt CAT

Altoona www.ZieglerCAT.com 800-342-7002 Minneapolis Atlantic 877-547-3819 800-352-2812 Sioux City Brainerd 712-252-4401 877-829-9850 Fort Dodge 800-342-1848 Buhl Mason City 800-446-9795 800-342-1849 Columbus Postville 800-526-0889 866-982-5656

2841 Verona Rd. • Verona, KY 41092 (859) 485-8500 • Fax: (859) 485-8573 www.newmantractor.com

Southeastern Equipment Company Names New Executive Vice President

Crookston Kentucky 800-422-5782 Diamond Duluth equipment 800-421-3831 www.diamondequipment.com Fergus Falls Bowling Green 270-781-1061 800-346-7649 JacksoncAt OhIO 866-847-6401 www.OhioCAT.com Richwood Marshall 888-446-4658 800-325-4929 North Mankato MInnesOtA 877-845-3938 ZIegler cAt www.ZieglerCAT.com Rochester Minneapolis 800-247-1068 800-352-2812 Shakopee Brainerd 877-829-9850 800-352-2812 Buhl St. Cloud 800-446-9795 800-522-9469 Columbus 866-982-5656 Crookston MICHIGAN 800-422-5782 MILLER-BRADFORD Duluth 800-421-3831 & RISBERG, INC. Fergus Falls www.miller-bradford.com 800-346-7649 Negaunee Jackson 866-847-6401 800-562-9770 Marshall 800-325-4929 OHIO North Mankato OHIO CAT 877-845-3938 Rochester www.OhioCAT.com 800-247-1068 Broadview Heights Shakopee 800-837-6200 800-352-2812 St. Cloud Sharonville 800-522-9469

800-332-4658 (Sales & Service) 888-736-8440 (Rental)

Southeastern Equipment Co. Inc. announced the promotion of Thor Hess to executive vice president. Hess will oversee both long term and short term company strategy, implement operating efficiencies across all 18 locations, manage manufacturer relationships and serve as in-house legal counsel. Hess joined Southeastern Equipment in 2014 as director of corporate development where he helped hone company strategy and assisted in managing corporate operations. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Columbus MIchIgAn 888-441-4658 MIller-brADfOrD (Sales & Service) Inc. & rIsberg, 888-736-8441 (Rental) www.miller-bradford.com Perrysburg Negaunee 888-339-4658 800-562-9770 (Sales & Service) 888-736-8442 (Rental) OhIO Troy OhIO cAt 888-330-4658 www.OhioCAT.com Youngstown Broadview Heights 800-837-6203 800-837-6200

Cadiz Sharonville 800-332-4658 800-837-6204 (Sales & Service) (Sales & Service) 888-736-8440 (Rental) 866-639-2283 (Rental) Columbus 888-441-4658 Canton (Sales & Service) 800-837-6207 888-736-8441 (Rental) (Sales & Service) Perrysburg 888-339-4658 (Rental) 888-736-8443 (Sales & Service) Zanesville 888-736-8442 (Rental) 800-837-6205 Troy 888-330-4658 (Sales & Service) Youngstown 800-209-1331 (Rental) 800-837-6203 Oakwood Village Cadiz 800-837-6204 800-633-1020

(Sales & Service) 866-639-2283 (Rental) WISCONSIN Canton 800-837-6207 MILLER-BRADFORD & Service) &(Sales RISBERG, INC 888-736-8443 (Rental) www.miller-bradford.com Zanesville 800-837-6205 Sussex (Sales & Service) 800-242-3115 800-209-1331 (Rental) Madison Oakwood Village 800-633-1020 800-585-7219

Eau Claire WIscOnsIn 800-585-7232 MIller-brADfOrD DePere & rIsberg, Inc 800-638-7448 www.miller-bradford.com Sussex Abbotsford 800-242-3115 888-886-4410 Madison 800-585-7219 Eau Claire 800-585-7232 DePere 800-638-7448 Abbotsford 888-886-4410

Made in the U.S.A. Since 1949

coNsTrucTIoN EquIpmENT GuIDE • www.constructionequipmentguide.com • may 21, 2016 • page 65

IllINoIs DIAmoND EquIpmENT www.diamondequipment.com Mt. Vernon 618-242-2273

WEsT sIDE TrAcTor sAlEs www.westsidetractorsales.com Naperville 630-355-7150 Rockdale 815-730-9011 Rockford 815-961-3160 South Holland 708-331-6362 Wauconda 847-526-7700

INDIANA DIAmoND EquIpmENT www.diamondequipment.com Evansville 812-425-4428

mAcAllIsTEr mAchINEry sAlEs/rENTAls www.macallister.com Indianapolis 317-545-2151 Indianapolis 317-244-RENT (7368) Fort Wayne 260-483-6469 (heavy equipment) 260-969-3322 (rental store) Lafayette 765-449-8191 (heavy equipment) 765-446-5600 (rental store) Terre Haute 812-478-3155 (heavy equipment) 812-231-6000 (rental store) South Bend 574-288-6622 Washington 812-254-1712 Bicknell 812-735-0286 Bloomington 812-349-9220 Fishers 317-598-9700 Greensburg 812-663-5829 Richmond 765-966-0626 Yorktown 765-759-2CAT (2228)

Now Available with Tier 4 Final

Page 66 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Crews Make Steady Progress on I-94 MDOT from page 1

tions representative of MDOT’s southwest region. “The road surface has deteriorated enough since it last was resurfaced about 15 ago, it needed to be repaved. We expect these repairs to keep the road surface in good condition for another 15 to 20 years.” The project includes I-94 bridge repairs over Puetz Road and Lost Dunes. Substructure repairs, deck repaving, new railing and bridge widening are expected to extend the bridges’ lifespans by 15 to 20 years. Schirripa added that drainage improvements and repair or replacement of about 30 culverts also will help extend the roadway lifespan. This section of I-94 was built in the late 1950s or early 1960s. “More than 43,000 vehicles a day pass through this I-94 corridor, including almost 12,000 commercial vehicles,” Schirripa said. “Our contractor is using a type of asphalt mixed with a polymer binder, making the pavement stronger and more durable than an asphalt surface with a standard binder. Given the economic importance of the I-94 corridor to Michigan, and indeed the Midwest, it’s vital to build a roadway that will support the heavy traffic volumes.” The construction has resulted in lane, ramp and local road closures. “Motorists can expect daily singlelane and nighttime double-lane closures on I-94 during construction,” according to the web page for the project. “Puetz Road will be closed with a detour posted. There also will be temporary ramp closures at Red Arrow Highway Exit 16 and Grand Mere Road Exit 22.” Rieth-Riley has worked on numerous projects on I-94 in the past three years that are similar to the current project. “I don’t think there is anything that we’re not prepared for,” said Rick Haney, area manager of Kalamazoo and Benton Harbor for Rieth-Riley’s office in Benton Harbor. “We have a pretty good track record and a staff that knows what to do. This project is fairly simple — it’s multiple phases, but a lot of the work has to be done at night, which is a pretty difficult challenge. The night paving part of the project is tough and there is also some upgrading being done to the existing bridges.” A lot of projects in the $14 million range are delivered in two years, while this one is being completed in less than eight months. Larry Adams, Rieth-Riley’s general

superintendent of the project, said that the bridge work is strengthening the structures and capping the decks, which is taking place as the road is being repaved. “The bridge work is the driving force of the job,” he said. “You have to rebuild half of the bridge and move the traffic over to the other side. Once the repaving is done, the traffic is switched and we start on the other side. We have barrier wall in place to keep the traffic away from us.” As noted, the repaving will be done at night. Currently crews are focusing their efforts on strengthening the shoulders to maintain traffic during the day and some ramp paving. “We just finished Phase 1, which had us widen two of the bridges to maintain traffic,” said Haney. “We’re pushing the traffic over on the shoulder so we can work safely and construct Phase 2 of the project. We also did a lot of clearing, tree removal, earth excavation, ditch work, and permanent fence removal and replacement. Phase 2 is to rebuild the other half of the bridges, and mill and level the inside lane.” The subcontractors did a lot earth work and fencing operations. There are 13 subcontractors associated with the project, including Kalin Construction for earth excavation; CA Hall for the bridge work; Northern Construction for all the milling; Give Them A Break Safety for traffic control; and Action Traffic for the guard rail and cable guard rail. “We did a lot of pre-planning to get ready for the project and with all the subcontractors,” said Haney, “the scheduling had to be precise.” The day shift — 7 a.m. to 8 p.m., has about 15 workers on site and the night shift, 8 p.m. to 9 a.m., can have upwards to 20 people. The crews expect to remove 76,000 cu. yds. (58,106 cu m) of earth and 55,000 tons (49,895 cu m) of asphalt. New materials should consist of 80,000 tons (72,574 t) of asphalt and 70,000 tons (63,502 t) of aggregate. The warm weather will help with the paving operations. “Let’s hope so,” said Adams. “This rain is not helping, but when the weather takes a turn for the better that will help our production and scheduling move forward. The crown of the road is in the middle of the center lane and we are going to pave 18-foot-wide one lane and half of the center lanes to the crown point. We have paved 18-foot –wide on I-94 on previous projects, and with proper auger extensions, we

achieved a good ride.” The project is about 8 mi. (12.8 km) from Rieth-Riley’s closest yard/shop and mechanics are brought in as needed. Rieth-Riley is doing the paving and is using Cat 1055e pavers, a Roadtec SB 2500C transfer machine, a CC 5522 Dynapac high frequency roller, a CB 54 Cat roller and eight-axle Red River Flowboy trailers to deliver materials. Equipment operators oil and grease their own equipment daily. “The greasing and replacement of oil and fluids for maintenance is done through Michigan Cat,” said Adams. “Our equipment manager, Adam Bender, organizes all of that and he tracks all of the servicing on our equipment through GPS, which gives him the information on the hours that a piece of equipment has been used to determine when it needs to be serviced. “Our pavers are two years old and we have a brand new roller,” he said. “Any time we have a breakdown, it’s run through our equipment group and Bender, who contacts Michigan Cat, which goes to the work site and troubleshoots the problem.” Rieth-Riley purchases equipment from dealers such as McCallister Machinery in South Bend Indiana and MacDonald Machinery in South Bend. Roadtec equipment is purchased directly from the manufacturer. Haney and Adams are leaving nothing to chance to meet the completion date. “It’s a tight schedule and we’re looking at no room to spare,” said Adams, who has been with Rieth-Riley for 10 years. “We’re putting all our effort into making the delivery date. Of course there are some down times for some aspects of the work as we progress, but we’re going at it steadily.” “We’ve been working six days a week since the project started. Our crews are highly experienced in highway paving be it day or night, and take great pride in the quality of their work,” said Haney. This year Rieth-Riley is celebrating its 100th anniversary. The company operates mainly in Indiana and Michigan and has been employeeowned since 1989. “Working for Rieth-Riley is like being part of a large family,” said Adams. “Each area reaches out and helps whenever they can.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

KOBELCO-USA.COM

Grand Equipment Co. 3310 Hudson Trails Dr. Hudsonville, MI 49426 616-896-7700 Fax: 616-896-6700 www.grandequipment.com

Southeastern Equipment Co., Inc. Corporate Office 10874 East Pike Rd. Cambridge, OH 43725 740-432-6303 1356 3rd Street Brilliant, OH 43913 740-598-3400 1500 Industrial Parkway Brunswick, OH 44212 330-225-6511

Mid Country Machinery 3478 5th Ave S Fort Dodge, IA 50501 800-206-5936 4734 Sergeant Road Waterloo, IA 50701 319-234-8710 106 8th Stree Sergeant Bluff, IA 51054 866-539-8106 www.midcountrymachinery.com

6390 Shier-Rings Rd. Dublin, OH 43016 614-889-1073 228 SR 7 North Gallipolis, OH 45631 740-446-3910 3875 W Fourth St Mansfield, OH 44903 419-529-4848 26580 St. Rt. 7 Marietta, OH 45750 740-374-7479 8757 Tyler Blvd. Mentor, OH 44060 440-255-6300

Miller-Bradford & Risberg, Inc. W250 N6851 Hwy 164 Sussex, WI 53087 262-246-5700 Fax: 262-246-5719

404 Breaden Rd. Monroe, OH 45050 513-539-9214 6415 Promler Ave. N. Canton, OH 44720 330-494-3950

DeForest, WI 608-222-9191

27207 N. Dixie Hwy Perrysburg, OH 43551 419-874-0331

Eau Claire, WI 715-832-3443

7444 Enterprise Park Circle Evansville, IN 47715 812-476-7321

De Pere, WI 920-338-5800

3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260-483-8868

Marathon, WI 715-443-6000

4951 West 96th St. Indianapolis, IN 46268 317-872-4877

Negaunee, MI 906-475-4181 www.miller-bradford.com

1982 Florence Pike Burlington, KY 41005 859-586-6133 1776 S. Cedar Street Holt, MI 48842 517-694-0471

Ronson Equipment Co, LLC 18030 Wicker Ave. Lowell, IN 46356 219-696-5680 Fax: 219-696-5690 10761 West Coulter Road Westville, IN 46391 219-785-2909 www.ronsonequipment.com

48545 Grand River Novi, MI 48374 248-349-9922 1505 Hebron Rd. (Rt. 79) Heath, OH 43056 740-522-3500 www.southeasternequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 67

UNTIMED POWER BOOST: STRENGTH ON YOUR SCHEDULE We know what it’s like to sit in the operator’s seat when you hit solid rock. The power boost button on most excavators can deliver the extra force you need to break through – but only in short bursts. We knew there had to be a better way, so we took our jobsite experience and collaborated with our engineers. The result is an untimed power boost that comes standard in all KOBELCO conventional excavators from the SK210LC to the SK500LC. It provides all the extra muscle you need continuously so you can power through the toughest jobs without interruption.

MINI

SHORT RADIUS

CONVENTIONAL

KOBELCO-USA.COM

Blue Ridge Tractor

Illinois Truck & Equipment Co.

6923 Mine Five Rd. Benton, IL 62812 618-527-8673 www.brtractor.com

320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486 www.iltruck.com

General Equipment & Supplies, Inc. 4600 Valley Industrial Blvd. Shakopee, MN 55379 952-224-1500

3901 N. Lewis Ave. Sioux Falls, SD 57104 605-336-9000 www.genequip.com

Page 68 â&#x20AC;¢ May 21, 2016 â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ CONSTRUCTION EQUIPMENT GUIDE

Ready y. Set. Save on o Kubotaâ&#x20AC;&#x2122;s Grand L Series eries Compact pact T Tractors. ractors ractors.

0 Down, 0% Financing for 60 6 Months

A.P P.R.

Offfer fe ends 6/30/16.

Martin Implement Sales, Inc. 18405 115th Avenue Orland Park, IL 60467 708/349-8430 Fax 708/349-4230 www.martinimplement.com

Burris Equipment Co. 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 Fax 847/336-2697 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 Fax 815/363-4109

2001 Cherry Hill Rd. Joliet, IL 60433 815/464-6650 Fax 815/464-6951

1st Choice Equipment LLC 124 N. Schmale Rd. Carol Stream, IL 60188 630/510-6050 Fax 630/510-6051 1305 Sentry Drive Waukesha, WI 53186 262/521-5802 Fax 262/521-5801

Lano Equipment, Inc. Anoka, MN 888/448-5266 753/323-1720 Shakopee, MN 877/753-6100 952/445-6310

Corcoran, MN 888/479-4342 763/479-8200

ABC Equipment 29 Pearl Rd. Brunswick, OH 44212 888/572-3888 Fax: 330/220-4949 38525 Chester Rd. Avon, OH 44011 440/934-7368 www.abcequipment.com

GRZQ $ 3 5 Â¿QDQFLQJ IRU XS WR PRQWKV RQ SXUFKDVHV RI QHZ .XERWD / H[FOXGLQJ / / 6HULHV (TXLSPHQW LV DYDLODEOH WR TXDOLÂ¿HG SXUFKDVHUV IURP SDUWLFLSDWLQJ GHDOHUVÂ¶ LQ VWRFN LQYHQWRU\ WKURXJK ([DPSOH $ PRQWK PRQWKO\ LQVWDOOPHQW UHSD\PHQW WHUP DW $ 3 5 UHTXLUHV SD\PHQWV RI SHU Â¿QDQFHG $ 3 5 LQWHUHVW LV DYDLODEOH WR FXVWRPHUV LI QR GHDOHU GRFXPHQWDWLRQ SUHSDUDWLRQ IHH LV FKDUJHG 'HDOHU FKDUJH IRU GRFXPHQW SUHSDUDWLRQ IHH VKDOO EH LQ DFFRUGDQFH ZLWK VWDWH ODZV ,QFOXVLRQ RI LQHOLJLEOH HTXLSPHQW PD\ UHVXOW LQ D KLJKHU EOHQGHG $ 3 5 $ 3 5 DQG ORZ UDWH Â¿QDQFLQJ PD\ QRW EH DYDLODEOH ZLWK FXVWRPHU LQVWDQW UHEDWH RIIIIHUV )LQDQFLQJ LV DYDLODEOH WKURXJK .XERWD &UHGLW &RUSRUDWLRQ 8 6 $ 'HO $PR %OYG 7RUUDQFH &$ VXEMHFW WR FUHGLW DSSURYDO 6RPH H[FHSWLRQV DSSO\ 2IIIIHU H[SLUHV 6HH XV IRU GHWDLOV RQ WKHVH DQG RWKHU ORZ UDWH RSWLRQV RU JR WR ZZZ NXERWD FRP IRU PRUH LQIRUPDWLRQ 2SWLRQDO HTXLSPHQW PD\ EH VKRZQ

Southeastern Equipment Co., Inc. 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260/483-8868 4951 West 96th Street Indianapolis, IN 46268 317/872-4877 www.southeasternequip.com

kubota.com

Â© Kubota Tractor Corporation, 2016

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 69

BREAKING

D N U O R G W NE 550Z ALL-NEW

COMPACT EXCAVATOR

TRUE ZERO-TAIL-SWING ɼ Zero-tail design ensures that the upper structure never overhangs the tracks, increasing productivity in tight spaces. POWER-A-TACH® ɼ With the flip of a switch, attachments can be changed quickly with minimal effort. The operator only leaves the seat to engage and disengage the safety pin. DIGITAL OPERATOR INTERFACE ɼ Located in a highly-visible area and backlit for improved visibility, this interface features an hour meter, clock, automatic adjustable reminders, regeneration notifications, historical monitoring and fuel consumption.

G E N U I N E

™

Y AT: DEMO ONE TODA

P A R T S

STAR EQUIPMENT LT D .

STAR EQUIPMENT LTD. 1401 2ND AVENUE DES MOINES, IA 50314 (515) 283-2215 FAX: (515) 283-0295 (800) 369-2215

2950 6TH STREET SW D,EALER IA 52404 CEDAR RAPIDS (319) 365-5139 FAX: (319) 365-6726 (800) 728-5139

2625 W. AIRLINE HWY. WATERLOO, IA 50703 (319) 236-6830 FAX: (319) 236-6834 (800) 791-9249

2100 E. LINCOLN WAY AMES, IA 50010 (515) 233-9500 FAX: (515) 233-9505 (866) 856-2312

TOP NOTCH EQUIPMENT, INC. HIGHWAY 169 N. IMPRINT P5505 LYMOUTH, MN 55442 (888) 824-6559 (763) 398-0079 FAX: (763) 551-7916 WWW.TOPNOTCHEQUIPMENT.COM

WWW.STAREQUIP.COM

to learn more about Mustang compact excavators visit

m u s t a n g m f g . c o m

Page 70 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 71

Quality and reliability are built into every Terex crane. We have the machines you need to succeed. Add to that our commitment to speed and responsiveness, coupled with our global network, and it’s easy to see why Terex Cranes has the expertise to keep you up and running.

DELIVERING SUCCESS TOGETHER

RTL Equipment Inc. (RT-T-HC/CC-AT) www.rtlequipment.com 3000 SE Gateway Drive Grimes, IA 50111 515-986-0262 Fax: 515-986-0267

Contact our distributors and find out how we can help improve your bottom line.

Custom Truck & Equipment (RT-T-HC/CC-AT-BT) 7701 Highway 24 Kansas City, MO 64125 800-861-1065 www.cte-equipment.com

For Your Local Terex Dealer, Please Contact: Terex USA, LLC 106 12th St. SE Waverly, IA 50677 USA Phone: (319) 352-3920 Fax: (319) 352-9395 email: info.cranes@terex.com web: www.terex.com/cranes

1321 Highway 965 Swisher, IA 52338 319-857-4045 Fax: 928-441-1269

Authorized Terex Cranes Distributors © Terex Cranes 2016 · Terex, the Terex Crown design, Demag and Works For You are trademarks owned or licensed by Terex Corporation.

Page 72 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

JCB Produces 200,000th Loadall Telescopic Handler JCB’s Loadall has been one of the world’s most popular telescopic handlers for many years, leading the market with innovative design and engineering excellence. The Loadall has provided materials handling and lifting solutions for construction, agricultural and industrial markets for almost four decades. On April 7 JCB celebrated the production of its 200,000th award-winning Loadall telehandler, a milestone in materials handling history. Launched in 1977 as the JCB 520, the first Loadall was a twowheel drive machine with a 21-ft (6.4 m) lift height and a maximum lift capacity of 2.48 tons. Previously, contractors had lifted materials with rough terrain fork lifts, backhoe loaders and wheel loaders. Over the past 40 years, the JCB Loadall range has expanded to incorporate machines with working heights of up to 65.6 ft (20 m) and maximum lift capacities exceeding 6.61 tons. With every update, JCB has moved the telescopic handler market forward, introducing fourwheel drive, placing the engine to the side of the chassis to allow a lower boom-mounting position and offering multi-mode steering with equal-sized wheels to improve maneuverability. “From very small beginnings, the JCB Loadall has become a very important machine for JCB and for the construction and agricultural industries,” said Lord Anthony Bamford, JCB Chairman. “Revolutionary’ is often a word that is overused, but in the case of the Loadall, it is a perfect description. The way loads are handled on building sites and farms has never been the same since we introduced the Loadall in 1977.” From that early two-wheel-drive 520 model, the range grew rapidly with the addition of the heavierlifting 525 in 1980 and the lighter second-generation 520-2 and 5204 in 1981. The 520-4 introduced four-wheel drive and larger rear wheels for improved traction on construction sites. These models also were notable for the introduction of JCB’s Q-fit implement carriage, which allowed operators to work with a range of buckets and attachments, including pallet forks. Though known worldwide as

Loadalls, it wasn’t until 1982 that JCB adopted this name. At that time, JCB introduced its own slickshifting synchro-shuttle transmissions. Servo control levers were added in 1986 for easier operation, particularly in repetitive handling and loading operations. JCB completely overhauled the

L Dieselmax. In 2006, output was increased further for the engine’s debut in the side-engine Loadall. Two versions of this potent engine powered a purpose-built streamliner to a new diesel land-speed record on Utah’s Bonneville Salt Flats. In response to customer demand

the first compact side-engine Loadall with hydraulic propulsion, this enhanced machine offered a great combination of size, maneuverability, driving ease and loading/handling performance. To meet new emissions standards and performance demands, JCB developed the 4.4-L

Loadall MD Ian Pratt (Far L) and Loadall Operations Director Paul Grys (Far R) join employees (L-R) Ian Vickery, Cliff Ferrie, Mick Smith, Dave Bailey, Nick Miller, Paul Stockley and Richard Jenkinson in celebrating the 200,000th Loadall milestone.

Loadall concept in 1989 with rearengine models incorporating multi-mode steering and equalsized wheels all round for improved travel comfort and maneuverability. In addition to front-end, two-wheel steering that made it easier to drive a Loadall down the road, drivers could enjoy turning in tight circles with allwheel steering or even shuffling sideways in crab-steer mode to get out of an awkward corner or take the bucket edge along the side of a roadway. However, by 1997, JCB discovered that moving the engine to a side-mounted position between the wheels could lead to further improvements. This allowed a greater reduction in the height of the boom pivot for even better visibility over the right-hand side and to the rear three-quarters while providing unmatched service access to the power unit and cooling pack. Power and fuel efficiency benefitted again in 2005 when JCB introduced its own engine, the 4.4-

for increased performance and lower ownership costs, top-end Loadall models featured a highcapacity, variable-flow hydraulics system with oil pumped only as needed up to 140 liters per minute. That same year, the Loadall reached a significant production milestone when it became the first telehandler brand to hit the 100,000 mark. A $9 million investment in manufacturing resources and a second assembly line at the Rocester, UK, headquarters factory brought improved production efficiency and flexibility and substantially increased capacity. Just one year later in 2007, JCB would win the Queen’s Award for its groundbreaking 536-70, 535-140 HiViz and 535-125 HiViz models. These models would be closely followed in 2008 by a completely new side-engine, high-boom design for the North American market. In 2009, JCB built on existing experience with hydrostatic drives in mid-engine compact handlers to develop the 527-58. As

EcoMAX engines further, using only cooled exhaust gas recirculation (EGR) and a variable geometry turbo to meet Tier IV Interim emissions standards. Installed in high-specification versions of mainstream Loadall handlers in 2012, the EcoMAX also featured a more powerful engine control unit that sharpened its responses and helped deliver more torque and better fuel consumption. JCB also introduced a 74 hp (55 kW) EcoMAX engine to meet demand for lower operating costs, CO2 emissions and improved efficiency. This served as a popular choice for customers thanks to the exceptionally strong low-speed torque characteristics normally only seen on higher-powered engines. Also in 2012, JCB launched the heavyweight 550-80, a 26.25-ft. (8 m) lift machine with a 5.5-ton capacity, designed primarily for arduous loading operations with high-capacity buckets in both waste handling and agricultural markets. This would be closely fol-

lowed in 2014 by the 560-80, taking that maximum lift capacity to 6.61 tons. JCB’s highest lifting machine, the five-stage boom 540200, also joined the line-up at that time, providing customers with a stable 65.62-ft .(20 m) lift height. Today, the Loadall engine features a compact exhaust silencer and selective catalytic reduction (SCR) system housed beneath the hood to meet Tier IV Final emissions standards without the added hardware and servicing costs associated with the diesel particulate filter (DPF) needed on several competitive machines. The 74 hp (55 kW) EcoMAX solution really comes into its own as it meets emissions legislation without any requirement for after-treatment, mitigating the need for DEF (AdBlue). Hydraulic performance came under the spotlight in 2014 with the introduction of smart hydraulics across the 550, 560 and Wastemaster range, which includes a unique lift cylinder circuit that permits the boom to lower faster under complete control at low engine revs. This regenerative hydraulics system also added cylinder end-stroke damping, a “bucket shake” feature, automated boom suspension and auxiliary venting. Loading cycles also were 20 percent faster, and the system delivered a 15 percent reduction in fuel consumption. Further evidence of JCB’s experience developing both hydrostatic and powershift transmissions emerged with the 2015 introduction of the ultra-compact Loadall 525-60 HiViz with a hydrostatic transmission, full-sized spacious cab and exceptionally low boom mounting design to maximize visibility. The compact machine is just 6 ft (1.8 m) high and 6 ft. wide. Since its introduction in 1977, it took almost 30 years for JCB to sell the first 100,000 Loadalls, but it has taken less than 10 years to sell the subsequent 100,000 — a testament to the growing importance of the product and JCB’s strength and dedication in this sector. For more information, visit jcbna.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Pages 73-92

Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Contractor Range Extends JCB’s Hydraulic Breaker Line

JCB’s new line of Contractor breakers includes (L-R) the HM049T, HM033T and HM160T models.

JCB now offers double the number of hydraulic breakers designed to work with its range of excavators, backhoe loaders and compact equipment lines by launching its “Contractor Hammer Range.” Contractor breakers will be available alongside the existing professional line of hydraulic hammers. Both Professional and Contractor breakers will come with a three-year warranty. Contractor breakers offer the following features: • Complete range for 0.9 to 55 ton (0.8 to 50 t) carrier machines • Accumulators to protect carrier machinery from hydraulic pressure spikes • Models above 12.1 tons (11 t) carrier weight equipped with auto greasing systems • Two-speed control valves permit tool speed and stroke customization above 9.9 tons (9 t) • Internal control valves deliver 10 percent efficiency boost Contractor hydraulic hammers have been

specifically designed as a solution for customers working in less arduous conditions. They provide a genuine JCB product for users on a budget who still want a good quality hammer that’s highly productive. Each hammer has been extensively tested and matched to work perfectly with JCB carrier machines, according to the manufacturer. The range includes models from the compact HM012T that tips the scales at just 220.5 lbs. (100 kg) operating weight to suit compact excavators, to models designed to work with the largest JCB excavators currently offered in North America, which fall in to the 22-ton (20 t) category. All models come backed by a three-year manufacturer’s warranty. All Contractor breakers have accumulators to protect the carrier machine from hydraulic pressure spikes, reducing possible wear and tear on the hydraulic system. They also are equipped with auxiliary relief valves to protect the breaker from damage when used with other makes of machinery.

Hammers for use with equipment above 12.1 tons in operating weight come as standard with a refillable auto greasing system, ensuring the breaker always receives the correct amount of lubrication throughout the working day. This cuts downtime and boosts productivity for the customer. All breakers feature dust seals to prevent dust ingress and to ensure that lubrication remains inside the hammer body. The heavier models include twin oval tool retaining pins, which deliver double the life of a standard pin, as they can be rotated to wear evenly on both sides. Smaller breakers are equipped with a single tool retainer. Twospeed control valves on models above 9.9 ton carrier weight allow the operator to customize tool speed and stroke length, dependent on the material that is being broken. This increases productivity and reduces the risk of damage to the breaker and the carrier, according to the manufacturer. Internal control valves deliver up to 10 percent higher efficiency against other prod-

ucts with external valves. This results in less maintenance as the oil flow is improved, reducing heat build-up in the system and protecting internal seals. Heavier models also feature blank firing protection, further cutting the potential for damage to the breaker and wear to the carrier machine. Contractor breakers use a single scaled design with the same maintenance requirements for each model. This ensures that dealer and customer service staff, particularly in a rental operation, can easily work on all hammers in the range. All JCB Compact, Contractor and Professional breakers are delivered ready to work, with the correct mounting brackets and hydraulic hoses to match a wide range of JCB equipment. Compatibility is guaranteed, and the full hydraulic hammer range is backed by JCB’s service network. For more information, visit www.jcbna.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 74 • May 21, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Yahara Materials Meets Demand for Clear Stone Products

Unified’s “W” style clean screens are made of straight tension, Wshaped and custom cross wires.

Nick Cady, superintendent of operations at Yahara Materials.

Increasing production and maximizing throughput is nothing new. In fact, next to sizing accuracy, a recent survey shows that throughput is the second largest concern amongst producers, when surveyed to rank the factors most important when selecting screening media. But what happens when external factors such as market growth and adverse weather conditions impact your operation’s ability to meet the increasing demand and capture your market share? Here’s how one producer teamed with his local screening and crushing field specialist. Over the past 15 years, Yahara Materials located in Waunakee, Wisc., has experienced a dramatic increase in demand for clear stone products. These products are widely used for underground pipe and highway bedding to provide proper drainage. The product specifications required clean rock with minimal fines. Yahara Materials needed to find a way to increase its capacity to effec-

Yahara, triple deck portable plant.

tively capture its share of this growing market. “We experienced a 15 percent increase in our production throughput,” Nick Cady stated. Yahara Materials operates seven 6 by 20, triple deck, portable crushing plants that were equipped with slotted, Tri-Lock screens. These slotted screens became very problematic when faced with ever-changing soil conditions found at various locations. Due to increased moisture content present during the winter and spring months they were unable to remove enough fines to get the product within specification. The slotted screens would blind over, halting production and minimizing throughput. Upon the evaluation and recommendation of Rod Skindrud, the local Unified Screening & Crushing Company field service representative, Nick Cady, superintendent of operations at Yahara Materials,

Portable crushing plant.

changed to a stainless steel “W” style screen on the lower two decks, while the top deck remained a hard drawn, high carbon square opening, Unified screen, for cost efficiency. This change greatly increased the flexibility of the screen and increased product flow. The “W” style screen is composed of straight tension wires, “W” shaped wires and custom cross wires. Three different wire sizes are used for a harmonic screening effect. This product allows greater open area and increases throughput with this “harmonic effect.” In addition, the “W” slots perform well during wet and difficult screening conditions. “Blinding and sizing problems can be eliminated. We have experienced a 15 percent increase to production since the change out to the “W”-slots and the “W” slot screens are lasting longer. They are lasting 2 to 3 times longer than anything we used in

this application, in the past,” according to Nick Cady. “The increase has allowed us to increase our capacity to capture our share of the growing demand for clear stone. Plus these clean screens have saved us an investment in a new Wash Plant for our concrete applications. Our production is up, throughput improved, especially in wet conditions, and we’ve saved an additional step in processing materials. It was a win-win decision.” Yahara Materials now uses “W” slotted screens on the bottom two decks of all its 6 by 20, Triple Deck plants. “We have not had to change them out all season,” said Cady. For more information, call 800/328-0225 or visit www.unifiedscreening.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 21, 2016 • Page 75

BUTLER MACHINERY CO. www.butlermachinery.com 3402 36th St. SW Fargo, ND 58014 701-280-3100 800-726-7475 3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. 46 St. Grand Forks, ND 58201 701-775-4238 th

4950 E Highway 12 Aberdeen SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508

RB SCOTT COMPANY INC. www.rbscott.com 1011 Short St. • Eau Claire, WI 54701 715-832-9792 • Fax: 715-832-7767

Sustainable, economical and fuel-efficient solution for concrete and asphalt crushing That’s how we make the big difference, the Metso Way.

The all-new Lokotrack® LT1213S™ impactor plant is having a positive impact on the bottom line of quarry and recycling customers worldwide. At one recycling application, production surged to 250 metric tons per hour, and fuel consumption decreased dramatically. The new generation Lokotrack® LT1213S™ includes a 40% larger dualslope screen, direct high-efficiency power transmission, and other unique solutions like a stand-by function to reduce fuel consumption. In all, the plant is easy and safe to operate and maintain. Find out more about profitable crushing at metso.com/showroom/aggregates #TheMetsoWay

CENTRAL SERVICE & SUPPLY, INC. www.centralsands.com 4219 E. 50th St. • Des Moines, IA 50317 800-247-2400 • 515-964-8600 Fax: 515-309-0667

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913-371-3822 Fax: 913-371-3870 4115 S. 90th St. Omaha, NE 402-331-9200

5601 Fletcher Ave. Lincoln, NE 402-325-0447 4949 Juergen Rd. Grand Island, NE 308-384-2620

AIS CONSTRUCTION EQUIPMENT CORP. 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Fax: 517-321-4191 www.aisequip.com Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311

Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 West Detroit, MI 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

0% - 2.99%

Ask your Metso distributor about Metso’s March Into Spring 2016 special-rate financing

Page 76 • May 21, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

HIGH-QUALITY MACHINES AND PRODUCT SUPPORT

Get high-quality Stowers Machinery Coverage Area for Screen Machine Screen Machine products, plus topnotch parts and service support, from Stowers Machinery Corporation throughout the state of Tennessee and in southeastern Kentuckyy, southwestern Virginia, western North Carolina, northern Georgia, and northeastern Alabama. Offering equipment made in the USA from Screen Machine Industries is another way that Stowers Machinery helps you acquire the equipment you need. Visit our website at screenmachine.stowerscat.com or call us to learn how Stowers and Screen Machine can add value to your business.

Call toll-free 800.362.9690 © 2016 Stowers Machinery Corporation. All rights reserved. © 2016 Caterpillar. All rights reserved. CA ATT, CA ATERPILLAR, TEERPILLAR, BUILLTT FOR ITT,, their respective logos,“Caterpillar logos,“Caterp pillar Yeellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Metso Launches Nordberg GP7

Metso continues to expand its range of high capacity crushers by launching the Nordberg GP7, its largest Nordberg GP secondary gyratory crusher to date.

Metso continues to expand its range of high capacity crushers by launching the Nordberg GP7, its largest Nordberg GP secondary gyratory crusher to date. The new 58ton (52 t) crusher features an optimal combination of feed opening, cavity design and capacity. This combination ensures high crushing performance, even with the hardest feed, and helps keep operational costs low. In addition, the crusher is safe to operate and maintain, according to the manufacturer. Nordberg GP7 is well suited for both mining and aggregates applications. It can be fed with a large primary crusher such as the Nordberg C200 jaw crusher or Nordberg SUPERIOR primary gyratory crusher, and followed by a Nordberg HP6 cone crusher for tertiary crushing. Constant Feed Opening Offers Significant Advantages The Nordberg GP7 secondary gyratory crusher features a large feed opening of 18 in. (45.7 cm), which remains constant throughout the lifetime of the liners. This is one of the most significant benefits of the new crusher. The constant feed opening ensures steady performance and stable endproduct quality, which translates into predictable revenue and excellent process throughput.

High Power Meets Flexibility Nordberg GP7 has seven strokes available as standard. The ability to select a suitable combination from the strokes — 1 to 2 in. (2.5 to 5 cm) ensures perfect adaptability for any application. The steep cavity and easily changeable stroke ensures high performance when using a power rating as high as 740 hp (550 kW). In fact, Nordberg GP7 has the highest power rating in its size class, according to the manufacturer. Due to the robust design specific to Nordberg GP, the GP7 adapts to varying feed conditions. Safe to Operate and Maintain The limited number of service points can be accessed safely and easily. As with all Nordberg GP crushers, Nordberg GP7 is delivered with all of the tools required for safe maintenance work. Process control is based on an advanced Metso IC automation system that provides easy, safe and troublefree operation. The Nordberg GP7 secondary gyratory crusher has exactly the same footprint as the Symons 7 ft. and similar crushers, which makes replacement of an old crusher very easy. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 21, 2016 • Page 77

Attachments can n make your machine moree valuable. Allied offers a wide assortment of attachments to fit all of your makes and models of excavator, loader/backhoe, mini-excavator, skid-steer or compact track loader machines. Allied has become attached to your machines. Allied’s construction and demolition attachments are productive and dependable. State-of-the-art technology.Full product line. Competitive price and performance. Allied offers innovative, problem-solving capabilities. Commitment to product availability. Superior product support. Strong Distributor network. Most of all Allied meets and exceeds customer performance expectations. To put a high performance Allied attachment on your machine, call us at 1-800-321-1046 or visit AlliedCP.com for the name of a Distributor nearest you. We’ve become attached to your machines.

CONSTRUCTION MACHINERY COMPANY www.cmcky.com 2911 S. English Station Rd. Louisville, KY 40299 502-267-4020 866-901-2262 Fax: 502-261-9251

2235 Ragu Drive Owensboro, KY 42303 270-683-2000 877-683-2262 Fax: 270-683-3727 267 W. Jay Louden Rd. Carrollton, KY 41008 502-732-4661 Fax: 502/732-8355

ILLINOIS TRUCK & EQUIPMENT www.iltruck.com 320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486

HOWELL TRACTOR AND EQUIPMENT

HIGHWAY EQUIPMENT COMPANY

www.howelltractor.com 480 Blaine St. Gary, IN 46406 800-852-8816 Fax: 219-977-6395 2770 May Rd. Peru, IL 61354 815-224-3003 Fax: 815-224-2538

www.highway-equipment.com 1405 Timken Place SW Canton, OH 44706 330-915-8391 Fax: 330-915-8411

Page 78 • May 21, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

FlexiROC T15 R Upgrades Save Time, Drilling Costs

3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 7910 Highway 2W Devils Lake, ND 58301 701-665-3800 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 3402 36th St. SW Fargo, ND 58104 701-280-3100 800-726-7475

1201 S. 46th St. Grand Forks, ND 58201 701-775-4238 17040 Hwy 11 Hankinson, ND 58041 701-242-7474 7695 Highway 18 S. Hoople, ND 58243 701-894-6363 1910 27th Ave SE Jamestown, ND 58401 701-251-1400 1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508

4950 E. Highway 12 Aberdeen, SD 57401 605-225-6240 1715 US Hwy 14 W. Huron, SD 57350 605-353-1200 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

www.fabickcat.com

Cape Girardeau, MO 800-845-9175 Marion, IL 800-845-9179 Metropolis, IL 866-299-6044 Salem, IL 800-845-9176 Troy, IL 866-345-5681 Mt. Carmel, IL 888-769-7247 Milwaukee, WI 414-461-9100

Madison, WI 608-271-6200 LaCrosse, WI 608-783-4891 Eau Claire, WI 715-874-5100 Wausau, WI 715-359-6220 Green Bay, WI 920-498-8000 Superior, WI 715-398-9696 Marquette, MI 906-475-4191

One Fabick Drive Fenton, MO 64026 800-845-9188

Alta Equipment Company www.altaequipment.com

8840 Byron Commerce SW Byron Center, MI 49315 (616) 878-7450 Fax: (616) 878-7650

1061 Stepke Ct. Traverse, MI 49685 (231) 943-3700 Fax: (231) 943-8110

G3283 S. Dort Hwy. Burton, MI 48529 (810) 744-4840 Fax: (810) 744-1523

56195 Pontiac Trail New Hudson, MI 48165 (248) 356-5200 Fax: (248) 356-2029

5105 Loraine St. Detroit, MI 48208 (313) 394-1811 Fax: (313) 394-1812

Brandeis Machinery & Supply Co. www.brandeismachinery.com

Evansville, IN • (812) 425-4491 Ft. Wayne, IN • (260) 489- 4551 Indianapolis, IN • (317) 872-8410 Corbin, KY • (606) 528-3700 Lexington, KY • (859) 259-3456 Louisville, KY • (502) 491-4000 Paducah, KY • (270) 444-8390 Stanville, KY • (606) 478-9201

The 15-ft. (4.5 m) long boom and 12-ft. (3.66 m) extended feed have 110 degrees side-to-side reach, allowing more holes to be drilled without repositioning the rig.

Drilling 1- to 2-in. (2.5 to 5 cm) diameter blastholes for stone quarries and construction projects is even more efficient with updates to the Atlas Copco FlexiROC T15 R. The rubber-tired, four-wheel-drive top hammer drill rig covers rough terrain faster, has a longer reach for more holes in fewer moves, and drills smoother, faster holes in tough conditions, according to the manufacturer. The upgraded FlexiROC T15 R rig’s 2.4 Hz Bluetooth radio remote control unit can control both tramming and drilling functions, which are powered by 74 hp (55 kW) 2.8 L Cummins Tier IV Final engine. Tuning rpm with the radio remote control maximizes fuel efficiency. The 15-ft. (4.5 m) long boom and 12-ft. (3.66 m) extended feed have 110 degrees side-to-side reach, allowing more holes to be drilled without repositioning the rig. Fewer moves mean more holes drilled faster with less cost overall. Fast setup is supported by the FlexiROC T15 R boom’s 360-degree rollover capability and the carrier’s sure-footed outrigger jack supports. Re-pinning the boom takes only minutes. The combination of features enables operators to drill a hole from practically any rig position. The Rock Drill Control system automatically adjusts impact and feed speed of the COP 1028 rock drill in proportion to drill parameters such as rotation torque, reducing stress on tool and equipment for longer life. Optimized drilling also increases productivity and drilling performance, even in soft and cracked formations. An optional hydraulic, variable force winch is available for added versatility in rough terrain and areas difficult to access. For more information, call 800/732-6762 or visit www.atlascopco.us. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Foristell, MO 800-539-9217 Columbia, MO 800-791-5401 Jefferson City, MO 800-845-9177 Springfield, MO 888-959-2100 Joplin, MO 866-313-1748 Willow Springs, MO 866-628-1717

www.zieglercat.com MINNESOTA BEMIDJI* 5426 Hwy 71 North Bemidji, MN 56601 877-829-9850 BRAINERD 3311 Liberty Lane Brainerd, MN 56401 218-829-9800 BUHL 10081 East Hwy 169 Buhl, MN 55713 218-258-3232 COLUMBUS 13822 West Freeway Drive Columbus, MN 55038-9705 651-982-5600 CROOKSTON 720 3rd Ave SW Crookston, MN 56716-0538 218-281-4245 DULUTH 210 Garfield Ave. Duluth, MN 55802-2696 218-722-6628 FERGUS FALLS 3502 State Hwy 210 West Fergus Falls, MN 56537-4003 218-736-2680 JACKSON 191 Industrial Parkway Jackson, MN 56143 866-847-6401 MANKATO 2145 Howard Drive West Mankato, MN 56003 507-388-1444 MARSHALL 1200 North Hwy 59 Marshall, MN 56258-2761 507-532-4403 MINNEAPOLIS 901 West 94th Street Minneapolis, MN 55420-4236 952-888-4121 ROCHESTER 6340 Hwy 63 South Rochester, MN 55904-8414 507-285-1775

SHAKOPEE 8000 County Road 101 East Shakopee, MN 55379 800-352-2812 ST. CLOUD 2225 255TH Street St. Cloud, MN 56301-8742 320-253-2234 IOWA ALTOONA 1500 Ziegler Drive NW Altoona, IA 50009-7200 515-957-3800 PARTS EXPRESS 515-957-3843 800-752-0856 ZIEGLER RENTAL 1600 Ziegler Drive NW Altoona, IA 50009-7200 515-957-3828 888-270-6258 Fax: 515-957-3881 ATLANTIC 951 Park Drive Atlantic, IA 50022 712-243-1039 877-547-3819 FORT DODGE 3366 5TH Ave. South Fort Dodge, IA 50501-6428 515-576-3161 800-342-1848 MASON CITY 11490 265TH Street Mason City, IA 50401-9656 641-423-7240 800-342-1849 POSTVILLE 308 North Lawler Street Postville, IA 52162-7802 563-864-7461 800-526-0889 SHELDON 102 Crossroads Drive Sheldon, IA 51201 712-324-5604 855-344-5604 SIOUX CITY 5300 Harbor Drive Sioux City, IA 51111-1114 712-252-4401 800-342-1847

*Parts and rental only

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 21, 2016 • Page 79

www.whayne.com 1400 Cecil Ave Louisville, KY 502-774-4441 Ashland, KY 606-928-3444 Bowling Green, KY 270-843-3275 Corbin, KY 606-528-3140 Dry Ridge, KY 859-823-1500

www.altorfer.com 2600 6th Street S.W. Cedar Rapids, IA 52404 319-365-0551 Fax: 319-365-5639 4712 Buckeye St. Davenport, IA 52802 563-324-1935 Fax: 563-324-2409 #1 Capitol Dr. East Peoria, IL 61611 304-694-1234 Fax: 309-694-4148

Evansville, IN 812-425-4651 Hazard, KY 606-439-4040 Lexington, KY 859-254-2756 Paducah, KY 270-443-3631 Pikeville, KY 606-437-6265

4200 Rodger Street Springfield, IL 62705 217-529-5541 Fax: 217-529-0020 1519 W. Kenyon Rd. Urbana, IL 61801 217-539-1671 Fax: 217-359-6310 3520 Moberly Ave. Hannibal, MO 63401 573-221-8600 Fax: 573-221-7187 701 Highway 24W Moberly, MO 65270 660-263-8200 Fax: 660-263-8203

www.macallister.com 7515 East 30th St. Indianapolis, IN 46219 800-382-1896 Fort Wayne, IN 800-944-0847 South Bend 800-685-9849 Lafayette, IN 800-283-4231 Washington, IN 800-932-5120 Terre Haute, IN 800-273-5650

www.ohiocat.com Cleveland, OH 440-526-6200 800-837-6200 Fax: 440-526-9513 Cadiz, OH 740-942-4626 800-837-6204 Fax: 740-942-4029 Canton, OH 330-244-2444 800-837-6207 Fax: 330-244-9130 Cincinnati, OH 513-771-0515 888-332-4658 Fax: 513-672-7658 Columbus, OH 614-878-2287 888-441-4658 Fax: 614-851-5015

COMMITTED TO YOUR

SAFETY

Toledo, (Perrysburg) OH 419-874-7975 888-339-4658 Fax: 419-873-8255 Troy, OH 937-335-7660 888-330-4658 Fax: 937-335-6447 Youngstown, OH 330-530-9010 800-837-6203 Fax: 330-530-9102 Zanesville, OH 740-453-0563 800-837-6205 Fax: 740-452-3605 Richwood, KY 859-372-4665 888-446-4658 Fax: 859-372-4659

Solve safety issues and you’re ready for work—without interruptions. That’s why the new Cat® MH3037 reduces slips, trips and falls with ground-level cab access—whether the cab is in front, behind or to one side of the machine. Combine that with a rear-view camera, sensors that prevent out-of-position operation and other safety features, and you have a machine that’s built for business. Your business.

Cat.com © 2014 Caterpillar • All Rights Reserved • Printed in USA logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as ATERPILLAR, TERPILLAR, BUILLTT FOR ITT,, their respective resp CAT, CA corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Page 80 • May 21, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Illinois

Indiana

Michigan

Minnesota

Ohio

Midwest Crushing & Screening

Powerscreen Indiana, Inc.

Powerscreen of Michigan, LLC

Theco, Inc.

AGGCORP

7144 N. Harlem Ave.

255 N. Hetzler Court

36639 Groesbeck Hwy.

5470 Quam Ave. NE

22800 Lakeland Blvd.

Chicago, IL 60631

Angola, IN 46703

Clinton Township, MI 48035

St. Michael, MN 55376

Cleveland, OH 44132

midwestcrushandscreen@gmail.com

sales@powerscreenindiana.com

powerscreenofmichigan.com

www.thecoinc.com

www.aggcorp.net

847.271.5027

313.841.8370

586.229.2882

800.776.0335

614.309.6854

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 21, 2016 • Page 81

CRUSHING

MATERIAL MA ATERIAL HANDLING HAN

SCREENING

TRACKS

ZZZ PFDOOLVWHUHTXLSPHQW FRP T S

ZZZ DPVWDWH FRP

ZZZ UPVHTXLSPHQW FRP T S

WASHING W ASHING & CLASSIFYING CL

ZZZ JHQHTXLS FRP Z ZZ JHQHTX T LS FRP

The complete source for equipment in the aggregate, construction and recycling industries. Offering industry-leading brands such as the Vanguard Jaw Crusher, Kodiak® Plus Cone Crusher, SuperStacker® Extendable Stacker, ProSizer® Mobile Screening Plant, Combo® Screen, Vari-Vibe® High-Frequency Screen, Duo-Vibe® High-Frequency Screen, Series 9000 equipment, Fast Trax, Global Track and FastPack.

www.kpijci.com

Page 82 • May 21, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Fuchs Aggressively Reaffirms Commitment in North America Rebranding Fuchs material handlers in North America and the line’s integration into the Terex Materials Processing division earlier this year was just the beginning of an aggressive North American campaign for the 127-year-old product line. According to Jon Van Ruitenbeek, the recently installed business line director of Fuchs in North America, there is a renewed focus on supporting the customer through the expansion of local service coverage, increasing the number of models within the line and customizing product designs to meet specific customer needs. “First and foremost, we are focusing on distribution,” said Van Ruitenbeek. “Our goal is to have coast-to-coast representation for our purpose-built Fuchs material handlers throughout North America. Additionally, we will work more closely with national account customers, in which our recent appointment of Anthony Laslavic to the Fuchs North American sales team helps with this initiative. His primary focus will be supporting our national customers in addition to some of our regional distributors.” Fuchs material handler distributors will have updated equipment designs and new models to offer their customers operating in the scrap, recycling, waste, port, aggregate and logging markets. The MHL370 F handler has an operating weight reaching 119,711 lb. (54,300 kg), delivers increased lift capacity over the smaller Fuchs MHL360 F material handler and offers up to a 59.9-ft. (18 m) reach. This new heavy duty handler is designed for large scrap processing operations with mega shredders, and its high capacity and long reach delivers efficient vessel loading and unloading of material in port applications. “Its elevating cab provides a maximum eye-level operation of 20 ft. and independent cab forward movement of 7.2 ft., which is critical in these applications,” said Laslavic, national accounts and regional sales manager of Fuchs. “The MHL370 F handler is a new class of machine for Fuchs, and it fits into a growing capacity class market in North America.” Fuchs also gave a preview of a new cab design at ISRI that will hit

According to Jon Van Ruitenbeek, the recently installed business line director of Fuchs in North America, there is a renewed focus on supporting the customer through the expansion of local service coverage, increasing the number of models within the line and customizing product designs to meet specific customer needs.

the market in the fourth quarter of 2016 that improves operator efficiency and visibility, and it is set to introduce a new model that will replace the largest handler in the Fuchs line. However, with the product line, it’s not just about models. It’s about efficiency and controlling costs. The advanced kinematics of the handlers’ purpose-built design offers higher capacities at full extension, and they consume significantly less fuel than comparably sized excavators, which lowers long-term operating costs, according to the manufacturer. “While most people think of the scrap and recycling markets for Fuchs material handlers, these high capacity and high efficiency machines work equally as well in a variety of applications from logging and forestry to ports and quarries,” said Van Ruitenbeek. “We actually had a customer design his transfer station around the efficient waste sorting capabilities of our

MHL320 material handler.” Busy Application Center Another cornerstone to the reenergized North American strategy is to make more use out of the Fuchs Application Center at the machine manufacturing facility in Germany. It’s here where Fuchs team members work closely with customers to design one-off handling solutions to meet specific application needs. “Previously,” said Steve Brezinski, technical sales specialist of Fuchs, “we approached the market with specific model choices and sparingly used the Fuchs Application Center.” Mike Smith, regional sales manager of Fuchs added, “With our new direction, we are opening up the full product line and capabilities of the Fuchs team to our customers throughout North America.” Beyond the standard product line offering, Fuchs gives cus-

tomers the opportunity to optimize and adapt the material handlers to meet the specific needs of the customer. A complete team consisting of Fuchs distributors, sales representatives, engineers and technicians work closely with the customer with one common goal in mind: custom design a machine for the best fit to a specific niche need of the customer. Fuchs material handlers are built with standardized components as the foundation of a modular system that allows engineers to design a wide variety of machines that offer the same durable and efficient operation that customers have come to expect from standard Fuchs machines. In addition to the model’s standard options, the application center can build a machine with either a wheeled or crawler undercarriage. The diesel engine can be replaced by an electric engine with cord length adapted to the customer’s needs. A pylon riser of varying lengths — popular

in the port applications — can be added between the machine’s upper and lower carriages for enhanced visibility. Additionally, if a stationary model is the best fit for the customer, the upper carriage of a handler can be adapted for stationary applications through the application center. Van Ruitenbeek summarized the customized approach and reenergized philosophy for the North American market this way. “You need a track or tire drive system? We have it. You want a diesel or electric power unit? We can supply either. You need a pylon riser? We can do that as well. We are here to meet the needs of our customers and help them to be more efficient and profitable, no matter the material handling application.” For more information, visit www.terex-fuchs.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 21, 2016 • Page 83

You Des Deser serve the Best. Beest From our most compact stump grinders and hand-fed chippers through our largest whole tree chippers and The Beast® recyclers, Bandit® equipment is built to make you money. We reduce your costs by maximizing fuel efficiency and reducing downtime. And we increase your income by producing the highest quality end product for your market. Bandit builds the best hand-fed chippers, stump grinders, whole tree chippers, The Beast recyclers, track carriers and skid steer attachments in the industry. And equally as important... Bandit Builds Your Bottom Line.

www.banditchippers.com | 1.800.952.0178 | Remus, MI - USA VISIT YOUR NEAREST AUTHORIZED DEALER ER LOCA ATION TION LARGE EQUIPMENT DEALERS (The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)

SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)

5050 N. River Rd. Schiller Park, IL 60176 847-678-3633 Fax: 847-678-3587 Mokena, IL 708-596-8050 West Chicago, IL 630-293-0606

Wauconda, IL 847-526-4255 Yorkville, IL 630-553-0150 www.atlasbobcat.com

1200 East Highway 13 Burnsville, MN 55337 952-894-0894 877-262-2284

588 Outpost Circle Hudson, WI 54016 715-531-0801 866-268-2418

3101 Spruce St. Little Canada, MN 55117 651-407-3727 877-331-0295

www.tristatebobcat.com

7800 Broadview Rd. Parma, OH 44134 440-340-3001

535 N. Hwy Drive Fenton, MO 60326 636-349-1141

www.kandksupply.com 3218 Marshall Dr. Amelia, OH 45102 513-685-0808 www.buckeyeequipmentsales.com

Ashland, KY 606-928-3477

Cross Lanes, WV 304-204-1818

Norton, WV 304-636-6421

Cowen, WV 304-226-3299

Pleasant Valley (Fairmont), WV 304-534-5454

Pikeville, KY 606-432-0321

Beaver, WV 304-255-1525

www.lec1.com

Page 84 • May 21, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 21, 2016 • Page 85

THE LEADER IN TECHNOLOGY: THE NEW MC 110 EVO

MC 110 Zi EVO Continuous Feed System

MC 110 Ri EVO High-tech jaw crusher

Direct drive via fluid clutch

High production, quality product with maximum efficiency, the all new Kleemann EVO jaw crusher.

ROAD AND MINERAL TECHNOLOGIES

Louisville, Kentucky 1801 Watterson Trail Louisville, KY 40299 Toll Free: 877-538-3221 Phone: 502-543-3746 Fax: 502-543-3716

Evansville, Indiana Fort Wayne, Indiana Indianapolis, Indiana Corbin, Kentucky Lexington, Kentucky Louisville, Kentucky Paducah, Kentucky Stanville, Kentucky

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 800-352-2757

www.wirtgenamerica.com Carterville, Illinois 1505 Donna Drive Carterville, IL 62918 Phone: 618-985-3399

Portage, Indiana 6450 Melton Road Portage, IN 46368 Phone: 219-764-8080

DePere, Wisconsin 3275 French Road DePere, WI 55115 Phone: 920-532-0165

Schofield, Wisconsin 9808 Weston Avenue Schofield, WI 54476 Phone: 715-355-9898

Springfield, Illinois 816 N Dirksen Parkway Springfield, IL 62702 Phone: 217-789-7711

East Peoria, Illinois 4299 N. Main St. East Peoria, IL 61611 Phone: 309-694-3764

Escanaba, Michigan 2600 S Lincoln Road Escanaba, MI 49829 Phone: 906-786-6920

Eau Claire, Wisconsin 7417 Margaret Lane Eau Claire, WI 54703 Phone: 715-874-5400

Cape Girardeau, Missouri 3364 Percy Drive Cape Girardeau, MO 63702 Phone: 573-334-5252

Bolingbrook, Illinois 220 East Frontage Road Bolingbrook, IL 60440 Phone: 630-739-7474

Marengo, Illinois 18210 Beck Road Marengo, IL 60152 Phone: 815-923-4966

DeForest, Wisconsin 604 Stokely Road DeForest, WI 53532 Phone: 608-842-4151

Franksville, Wisconsin 2916 N Sylvania Ave Franksville, WI 53126 Phone: 262-835-2710

Columbia, Missouri 4110 I-70 Drive SE Columbia, MO 65201

Phone: 573-814-0083 Bridgeton, Missouri 4670 Crossroads Industrial Dr. Bridgeton, MO 63044 Phone: 314-291-1330 Palmyra, Missouri 701 Industrial Drive Palmyra, MO 63461 Phone: 573-769-2056

Page 86 • May 21, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

CRUSHING PLANTS

We Call It EXPERTISE. You Call It PEACE OF MIND.

SCREENING Plants

IROCK knows the demands of your industry. Not just because we hear it, but because we’ve seen it and lived it, too. Our team of experts has years of hands-on experience working in your business and providing superior service. So when it comes to increasing efficiencies, reducing wear and boosting your bottom line, we're confident we have the right answers. For more information, call 866-240-0201 or see our equipment in action at www.irockcrushers.com.

w w w. i r o c k c r u s h e r s . c o m

Closed-circuit PLANTS

Crush. Classify. Profit.

Screen Machine Industries Introduces Cone Crusher

Screen Machine Industries’ CXT cone crusher is a mid-sized track-mounted unit that boasts a heavy-duty 40 in. (101 cm) high-speed bushing cone with hydraulic adjustment and tramp relief. Creatively designed for both function and efficiency, the CXT offers high production of cubical-shaped material within a compact overall footprint. It is driven by a Caterpillar C-13 415 hp (310 kw) ACERT diesel engine and the wireless remote capability makes it a perfect fit with our other track mounted crushers and screens to form a complete portable system. The unit’s structural frames and fabricated wear components made of Grade 80 steel. For more information, call 800/837-3344 or visit www.screenmachine.com.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 21, 2016 • Page 87

Purpose-built

from the ground up by Material handlers from SENNEBOGEN – 444,000 4,000 llbs. bs. tto o 75 7750,000 0,000 llbs. bs. Simple S imple design… design… Lift Lift more. morre. Mov Movee faster.. Save Save fuel. fuel. Run Run longer. ALTA EQUIPMENT COMPANY www.altaconstructionequipment.com

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com

Muskegon, MI 231-798-8754

Sterling Hts, MI 586-977-6000

Kentwood, MI 616-698-2960

Traverse, MI 231-943-3700

Battle Creek, MI 269-965-1269

Zeeland, MI 616-748-4108

New Hudson, MI 248-356-5200

Lansing, MI 517-272-5033

Romulus, MI 734-641-8238

Wixom, MI (Cons. Division) 248-356-5200

Saginaw, MI 989-752-9400

Byron Center, MI 616-878-7450

Louisville, KY 502-491-4000

Stanville, KY 606-478-9201

Evansville, IN 812-425-4491

Paducah, KY 270-444-8390

Corbin, KY 606-528-3700

Indianapolis, IN 317-872-8410

Lexington, KY 859-259-3456

Ft.Wayne, IN 260-489-4551

HOWELL TRACTOR & EQUIPMENT LLC www.howelltractor.com

GIBSON MACHINERY LLC www.gibson machinery.com

Gary,IN 800-852-8816

Cleveland, OH 440-439-4000

Peru, IL 800-342-6072

Pittsburgh, PA 724-695-5000

ROLAND MACHINERY CO. www.rolandmachinery.com

Carterville, IL 618-985-3399

Franksville, WI 262-835-2710

East Peoria, IL 309-694-3764

DePere, WI 920-532-0165

Bridgeton, MO 314-291-1330

DeForest, WI 608-842-4151

Columbia, MO 573-814-0083

Eau Claire, WI 715-874-5400

Cape Girardeau, MO 573-334-5252

Schofield, WI 715-355-9898

Palmyra, MO 573-769-2056

Escanaba, MI 906-786-6920

THE VICTOR L. PHILLIPS CO. www.vlpco.com

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com

Kansas City, MO 800-878-9290

Savage, MN 800-888-9515

Milan, IL 800-633-9114

Joplin, MO 800-878-8223

Des Moines, IA 800-555-1445

Duluth, MN 800-888-9535

Brookline Station, MO 800-955-2729

Cedar Rapids, IA 800-616-6615

Virginia, MN 800-752-4304

Wichita, KS 800-878-3346

Sioux City, IA 800-633-9104

Topeka, KS 800-878-4345 Garden City, KS 800-511-1435

Page 88 • May 21, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

GET A HANDLE ON OPERATING COSTS TTerex erex® Fuc Fuchs hs Ma Material terial Handlers

Purpose-built for your scrap yard, transfer station or mill yard, Terex® Fuchs material handlers help you get a handle on your business with: An average 11% reduced fuel consumption versus competitive material handlers An average 45% lower cost of ownership at 1000 hrs versus titi t i l h dl

Penn Jersey Mac hinery Deptford, NJ 856-227-6400

Frenchtown, NJ 908-824-4200 POWERSCREEN INDIANA, Lionville, P PA A INC. www.powerscreenindiana.com 610-363-9200 255 N. Hetzler Court, Suite C Angola, IN 46703 260-665-5816 • Fax: 260-665-3241

Staten Island, NY 718 448 2444

Chadwick-Baross Chelmsford, MA 800-804-0775 Bangor, M E 800-698-4838 COMPANY WRENCH

Caribou, M E 4805 Scooby Lane NW 00-2 70-25 47 8

www.companywrench.com Carroll, OH 43112 866-262-4181 • Fax: 740-687-9130

WCleveland Westbrook, e estbrook, ME Branch 8525 0 Golden 00 262-5 714 Oak Pkwy

Oakwood Village, OH 44146 440-439-4567 • Fax: 440-439-1789 Piketon Branch 3668 US Route 23 South Piketown, OH 740-289-3294 Cincinnati Branch 3120 S. Verity Pkwy. Middletown, OH 45044 513-649-8105 • Fax: 513-649-8107 7019 Brookville Rd. Indianapolis, IN 46239 317-375-7790 Fax: 317-375-7792

terex.com/construction

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 21, 2016 • Page 89

Complete Crushing & Screening Plant • Magnet! • Radio Remote Control! • Burns Less Fuel! • No Transport Permits!

Produces Up To Four Piles! (4) Stock Plus Scrap Steel!

• MAKE YOUR OWN BEAUTIFUL MATERIAL!

• STOP WAITING FOR CRUSHING CONTRACTORS!

• STOP PAYING HIGH RENTAL RATES!

• STOP PAYING HIGH TRUCKING COSTS!

• STOP PAYING “DUMP/ LANDFILL” FEES!

• LOW INTEREST RATES, LOW PAYMENTS!

Page 90 • May 21, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Crushing, Screening Plant Offers Versatility, Portability The portable K300/6203CC is a highly-mobile crushing and screening plant designed to provide application versatility and serve as the perfect rental tool for producers in sand and gravel, quarry or recycle applications, according to the manufacturer. The K300/6203CC combines a heavy-duty, roller bearing Kodiak Plus K300+ cone crusher with a triple-shaft, low-profile horizontal screen. Its modular design offers flexibility for easily converting the plant to meet producer configuration requirements, resulting in a quick turnaround from order to delivery. Engineered with mobility in mind, the K300/6203CC has the axle configurations to fit all of your transportation requirements. In its closed-circuit configuration, the K300/6203CC allows producers to utilize a single chassis to produce up to three finished products or supplement existing demand in a small footprint, reducing the number of auxiliary conveyors required to get the job done. The closed-circuit plant also

The K300/6203CC combines a heavy-duty, roller bearing Kodiak Plus K300+ cone crusher with a triple-shaft, low-profile horizontal screen. Its modular design offers flexibility for easily converting the plant to meet producer configuration requirements.

offers the flexibility to convert to an open-circuit configuration by simply reversing the closed-circuit cross conveyor, according to Ian Pendergrass, product development manager of KPI-JCI and Astec Mobile Screens. “The new modular design

allows customers to easily convert the plant to meet their needs,” Pendergrass said. “For our dealers, we offer the ability to mount either a K200+ or K300+ cone crusher to the same chassis with minimal cone mount modifications and switchgear considerations, provid-

ing added flexibility to their rental fleets.” Multiple axle configurations are available to meet portability needs, making it ideal for producers on the move. Several product discharge chutes or cross conveyor options also are available, as well

as feed conveyor and feed conveyor drive options. For more information, visit kpijci.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Atlas Copco Introduces New Bucket Crusher Attachments Atlas Copco Construction Equipment introduced its new generation of bucket crusher attachments that offer higher output and greater reliability than previous models. The new bucket crushers — the BC 2500 and BC 3700 — process about 80 percent more material due to their hydraulic drive system. The BC 2500 fits 24- to 33-ton carrier weight classes, and the BC 3700 fits 30- to 42-ton carrier weight classes. Atlas Copco debuted the new bucket crushers during bauma 2016 in Munich, Germany. “The new bucket Atlas Copco launched its new generation of hydraulic bucketcrusher attachments during bauma 2016. The new units process as much as 110 tons (98 t) per hour and fit 49,000to 85,200-lb. carriers.

crushers allow contractors to increase the versatility of carriers, especially on demolition, recycling and road construction applications,” said Rich Elliott, Atlas Copco product manager, hydraulic attachments. “The powerful drive systems and high reliability make them an ideal alternative to mobile jaw crushers for cramped worksites. Plus, they can process a wide range of materials, including aggregate, asphalt and concrete.” The attachments feature powerful components that allow carrier operators to crush as much as 110 tons (98 t) of material per hour. The drive system — two hydraulic motors and a timing belt — generates the high torque needed for powering the crushing jaw. The attachments also feature a reverse function to easily remove any blockage by pushing material back through the inlet. Crushing material on site allows contractors to save on transportation costs to a landfill or processing center since they can fit more material in each truck load. They also can reuse the crushed material on site as backfill, which reduces the costs associated with hauling in material. Atlas Copco designed the attachments for high reliability and maximum uptime in challenging worksite conditions. For example, Atlas Copco’s internally mounted drive system eliminates protruding components to minimize the risk of dust entering the hydraulic system and to protect key components from flying debris. Additionally, operators can control the diameter of the crushed materials by easily adjusting the jaw outlet without any special tools. This keeps set-up times to a minimum and allows operators to create varying material sizes, according to the manufacturer. For more information, visit www.atlascopco.us. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 21, 2016 • Page 91

Page 92 • May 21, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

BUTLER MACHINERY CO. www.butlermachinery.com 3402 36 St. SW Fargo, ND 58014 701-280-3100 800-726-7475 th

3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. 46 St. Grand Forks, ND 58201 701-775-4238 th

1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508 7910 Highway 2 W Devils Lake, ND 58301 701-665-3800 4950 E Highway 12 Aberdeen, SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

Lokotrack® ST2.8™ exceeds expectations in making a clean cement additive That’s how we make the big difference, the Metso Way.

A Lokotrack ST2.8 mobile scalping screen is helping a cement plant produce a clean additive for its production process, resulting in significant cost savings. The operator is saving up to $20 a ton by producing the additive using the ST2.8, rather than buying it from an outside source. The Lokotrack ST2.8 has a larger throw than most machines in its size class, which allows it to produce a cleaner end product. The unit’s powerful Caterpillar C4.4 diesel engine meets the latest emissions standards, and a new hydraulic system helps to reduce fuel consumption. Find out more about profitable mobile screening at metso.com/showroom/aggregates

CENTRAL SERVICE & SUPPLY, INC. www.centralsands.com

#TheMetsoWay

4219 E. 50th St. • Des Moines, IA 50317 800-247-2400 • 515-964-8600 Fax: 515-309-0667

AIS CONSTRUCTION EQUIPMENT CORP. www.aisequip.com 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Fax: 517-321-6275

Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583

Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449

Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257

Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311

West Detroit, MI 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

RB SCOTT COMPANY INC. www.rbscott.com 1011 Short St. • Eau Claire, WI 54701 715-832-9792 • Fax: 715-832-7767

0% - 2.99%

Ask your Metso distributor about Metso’s March Into Spring 2016 special-rate financing

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 93

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $115 • Color $165

“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 37 states ............................................................Call

2015 Takeuchi TB230, 24 HP T4 Yanmar Diesel, 175 Hrs.......................................................$39,000 11 JM Call Steve 262-373-2151

2010 332D John Deere 89 HP, 202 Hrs, 2 Speed A/C Joystick Controls .................................$44,900 Call MN Equipment 763-428-4107 10-11 PK

2004 Takeuchi TL140, 2546 Hrs, Cab & Heat ............ ..........................................................................$26,166 Top Notch Equipment, Inc. 888-824-6559 11-12 PK

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. Call McLaren 888-492-4230 10-11 DH

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. Call McLaren 888-492-4230 10-11 DH

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. Call McLaren 888-492-4230 10-11 DH

2000 Hitachi EX200 LC-5, 132 HP Isuzu Turbo Diesel, 9420 Hrs.........................................$37,700 Call Steve 262-373-2151 11 JM

2006 Ingersoll Rand SD100D, 84” Smooth Drum, Drum Drive, 125 HP Cummins Turbo, 1640 Hrs...... ....................................................................$54,650 Call Steve 262-373-2151 11 JM

2012 Volvo SD45D, 54” Smooth Drum, Drum & Axle Drive, 405 Hrs ....................................$49,650 Call Steve 262-373-2151 11 JM

2016 Link Belt 160 X4, 112 HP T4 Isuzu Diesel, 60 Hrs.......................................................$148,000 Call Steve 262-373-2151 11 JM

2015 Link-Belt 250 X4, 177 HP T4 Isuzu Diesel, Cab w/AC, Rear Camera, 350 Hrs...........$220,100 Call Steve 262-373-2151 11 JM

2010 CAT 305C CR, EROPS, 2200 hours, Hyd. thumb, new tracks, Blade ............................$CALL Courts Machinery • 507/678-2752 10-11 PK

2009 Cat 420E, County Machine, Cab, A/C, 4-in-1 Loader ........................................................$59,500 Call Kirk 785-823-6378 11 JM

2005 FECON FTX90L with Rear Winch, 1450 Hrs ....................................................................$38,000 11 JM Call Kirk 785-823-6378

2014 Terex TSV70 Skid Steer Loader, Vertical Path, 74hp, 2-Speed, Hyd-Quick-Tach 129” Hinge ........$36,600 11-12 EB Call Tania 614-443-9751 x237

2010 Bobcat E80, 3515 Hrs, 57 HP, 2-Speed Drive, 18” Digging Bucket, 24” Digging Bucket .........$52,000 Call George 219-696-8911 11 JM

2004 CAT 330 C/L, 9132 Hours, 247 HP C-9 Diesel 12'9 Stick, 60"Bucket, Extra Counter Weight for Heavy Lifting, Cab w/ Heat & A/C, AM/FM, Fresh Epoxy Paint Condition: Excellent, Delivery Option is Offered........... .........................................................................$79,000 10-11 PK Call Mike Pieper 319-470-8388

Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us 11-12 TM

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 11-12 EB 614-395-4064

2006 Cat XQ-80 Generator, 8146 Hrs ...........$19,000 Albert Medcalf or Marcela Newman 10-11 EB 502-456-4050

Page 94 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $115 • Color $165

2006-2010 Ingersoll Rand DD-118HF & DD-138HF 1999 Dynapac SP-CC-102 Dual Drum Vibratory 2012 Volvo MT2000 Milling Machine, Cummins Roller, #7137 ...............................................$6,500 610HP Tier 3 Dsl, 86” Keystone Cutter ....$275,000 Compactors, Various Units to Choose From! 11 JM 11 JM 800-283-1336 800-283-1336 11 JM 800-283-1336

2009 Volvo MW500 Milling Machine, 20” Wide Cutter, Deutz Diesel Eng, Rear Conveyor.$115,000 11 JM 800-283-1336

Doosan DL 220, 380 Hrs, 3 Yd Ride Control, Quick Coupler ..........................................................$135,000 Caleb Hinkkanen 800-456-4005 Ext. 143 11-12 PK

2011 John Deere 850K - WLT, s/n 199818, 5670 Hrs, Cab, A/C, 3 Position Ripper w/2 Shanks, New Chains & Sprockets, 13” Wide 6-Way Blade .............$185,000 11 JM Call David 219-696-5680

2007 Case 445, s/n N7M438931, 4500 Hrs, ROPS 2012 Case DV202, s/n DDDDV202NCTF2016, 1175 Hrs, ROPS, RIght Side Drive Lever, 47” Drum w/Heat & Soft Cab, Hyd Coupler, 84” Bucket, ....................................................................$27,500 12x16.5 Tires & Grouser Tracks ...................$16,200 11 JM Call Mark 630-739-7770 11 JM Call Ken 630-878-8396

2007 Ditch Witch XT1600, 221 Hrs, Tracks at 90%, Excellent Condition ................................$49,500 Call Tim 630-665-5600 11 JM

2013 Kobelco CK 100G, 5300 Hrs, Original Owner, 150 Main Boom, Block, Ball, Certified ......... ..........................................................Call for Price Call Andy Forepaugh 216-316-1511 11-12 EB

2006 Case 580SM, s/n N6C412119, 4600 Hours, Cab w/ Heat and AC, 4 WD, Ext-hoe, Ride Control, Two Lever,82” Bucket, 12” and 24” Bkt......$42,900 10-11 JM Call Dennis @ 630-774-8830

2009 Grove YB 7722XL, 22 Ton Carry Deck, Cummins Engine With Scrubber, Enclosed Cab, 67’ Main Boom, 17’ Jib, 4 Wheel Drive , Auxiliary Light Package, Block, Ball, Cleveland Ohio ..CALL Call Andy Forepaugh 216-316-1511 11-12 EB

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $115 per ad, $50 additional for color.

Cat D8K 77V2082, 8K Plus Hrs, 8S Blade, Ripper Valve, Draw Bar, 95% Undercarriage.........$39,316 11-12 AP Call Don 317-356-2101

• Your ad will run for two consecutive issues in 1 region.

SEE YOUR BARGAIN Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at

800/523-2200

AD IN

COLOR

ONLY $50 EXTRA FOR TWO INSERTIONS

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 95

CLASSIFIEDS

Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

AsPHALt eQUIPMent

Crawler Loaders

Asphalt Pavers

1976 Cat 955L, Excellent Bucket with Teeth, Ready to work! Good condition $16,000.

LeeBoy 1000 Asphalt Paver, s/n 2890C, 8' - 13' Screed, Good condition, 2,375 hrs ...... ..................................$16,000.

ronson equipment Co. 219-696-5680

Casey equipment 847-437-8686

Wheel Loaders

eXCAVAtors

2012 JCB 416Ht, Cab A/C, Quick Coupler, 2.1 yd. Bucket, Excellent condition, 700 hours ..................................$82,950.

Hydraulic excavators

Casey equipment 847-437-8686

Doosan DX480 s/n 5217, 11' Stick, JRB Powerlatch, QC, Bucket, Grapple, Runs well! 3,687 hours ............$227,800. gibson Machinery 440-439-4000

LoADers Backhoe Loaders 2012 Kubota B26tLB, s/n 53663, Excellent condition Low hours..................$24,000. sellers equipment 785-823-6378

track Loaders

Subscribe to CEG today... Get an edge on your competition! Construction Equipment Guide Midwest Edition subscribers are the best informed about construction news, construction equipment, sales, auctions, equipment prices, trends and changes in the industry and activities of its people. Call Toll Free! We now accept Visa, Mastercard & American Express!

SUBSCRIPTIONS:

One Year $65

(within United States & Puerto Rico Only)

CARDMEMBER’S NAME _________________________________________________________ COMPANY NAME _______________________________________________________________ STREET____________________________________ PHONE NO. ________________________

2011 JCB 300t, CTL Tracks, ROPS Canopy, 2-speed, 78'' Bucket, Very good condition, 415 hrs ......................$48,000.

CITY ______________________________________STATE _______ ZIP ________________

Check Enclosed

Casey equipment 847-437-8686

trUCKs

VISA

MASTERCARD

American Express

Construction Association of Michigan (CAM) The mission of Construction Association of Michigan is to provide service, information and assistance to the construction industry. The Association exists to foster growth in the construction industry and encourage networking between members and their publics. CAM will act as a catalyst to promote and enhance profitability, efficiency and integrity within the industry for the benefit of association members. For further information: Website: http://www.cam-online.com; Email: marketing@cam-online.com; Address: 43636 Woodward , Bloomfield Hills, Michigan 48302; Phone: 248/972-1000. Michigan Construction News Coming Events: May 19 – 21, Thursday to Friday – American Institute of Architects, 2016 AIA Convention, Pennsylvania Convention Center, Philadelphia, Pennsylvania. Contact: AIA, 800/242-3837. May 24 – 26, Tuesday to Thursday – American Association of State Highway & Transportation Officials, 2016 AASHTO Spring Meeting, Des Moines Marriott Downtown, Des Moines, Iowa. Contact: Liz Forman, 850/224-7775. June 13-14, Monday-Tuesday – Associated General Contractors of America, 2016 Financial Issues Committee Meeting, Loews Madison Hotel, Washington, D.C. Contact: AGC of America, 703/837-5352; www.agc.org. June 14, Tuesday – Construction Association of Michigan, Golf Outing, Bay Pointe Golf Club, Commerce Township, West Bloomfield Township. Contact: CAM, 248/972-1000. June 26-29, Sunday-Wednesday – American Society Of Civil Engineers, International Conference On Transportation & Development, Omni Houston Galleria Hotel, Houston, Texas. Contact: ACEC, 800/5482723; www.asce.org. July 13, Wednesday – Michigan Infrastructure & Transportation Association, 2016 Metro Detroit Golf Outing, Twin Lakes Golf Club, Oakland Township. Contact: MITA, 517/347-8335. July 19, Tuesday – Construction Association of Michigan, Golf Outing, Links of Novi. Contact: CAM, 248/972-1000. July 27-31, Wednesday-Sunday – Michigan Infrastructure & Transportation Association, 2016 Summer Conference, Crystal Mountain Resort, Thompsonville. Contact: MITA, 517/347-8335. August 16, Tuesday – Construction Association of Michigan, Golf Outing, Fieldstone Golf Club, Auburn Hills. Contact: CAM, 248/972-1000. August 20, Saturday – Woodward Dream Cruise, “Cruise Into CAM,” CAM HQ, West Bloomfield. Contact: CAM, 248/972-1000. AGC – The Associated General Contractors of America (AGC) is the leading association for the construction industry. AGC represents more than 26,000 firms, including over 6,500 of America’s leading general contractors, and over 9,000 specialty-contracting firms. More than 10,500 service providers and suppliers are also associated with AGC, all through a nationwide network of chapters. For more information about AGC, please contact AGC directly: 2300 Wilson Boulevard, Suite 300

ONLY

$40

2 InsertIons In one regIon (northeast, southeast, Midwest, West) 30 words or less $1.20 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database.

You must have a classified print ad to do so.

Call 800-523-2200

EXP. DATE (Mo./Yr.) SIGNATURE OF AUTHORIZED CARDHOLDER

Doosan DA30 Articulated Dump Truck, s/n 740565, Runs well, 1,876 hours ....$208,600.

To view our Business Calendar online, go to www.constructionequipmentguide.com.

Construction Equipment Guide is THE Place to List It!

or go online to place your ad TOLL FREE

gibson Machinery, LLC 440-439-4000

DO YOu Have a Few Pieces OF HeavY equiPmeNt tO seLL?

CARD NUMBER

Articulating trucks

BusinessCalendar

1-800/523-2200 FAX 215/885-2910

470 Maryland Dr. • Ft. Washington, PA 19034 Email: circulation@cegltd.com

Arlington, VA 22201 For general inquiries: Phone: 703/548-3118. Fax: 703/548-3119. Email: info@agc.org Events Calendar: 2016 ACI-NA/ACC/AGC Airport Construction Strategy Summit Wednesday, June 8, 2016 to Thursday, June 9, 2016 Atlanta, Georgia Financial Issues Committee Summer Meeting Monday, June 13, 2016 – 10:00 AM to Tuesday, June 14, 2016 – 5:00 PM Washington, District of Columbia AGC Safety & Health Conference Wednesday, July 27, 2016 to Friday, July 29, 2016 District of Columbia THE ASSOCIATED GENERAL CONTRACTORS of NEW YORK STATE LLC JUNE 14, 2016 – Anthony S. Santaro AGC Scholarship Classic Annual Anthony S. Santaro AGC Scholarship Classic Tuesday, June 14, 2016 Turning Stone Casino & Resort, Verona, NY Please mark your calendars. We had a record 350 golfers at the 2015 event and maxed out the two scramble courses. This is the only fundraising event for our scholarship program. We have awarded over $1 million in scholarships to well deserving students. Any questions, please contact Brendan Manning at the AGC at bmanning@agenys.org or at 518/456-1134. McCann Industries WAUCONDA Open House Join us! Open House at Our Wauconda Branch Store Date: Friday, June 10, 2016 Time: 10:00 AM to 2:00 PM Location: McCann Industries Wauconda Branch Store 1360 N. Rand Road Wauconda, Illinois 60084 . Speak With Experts From Takeuchi, Husqvarna, DeWalt and More! . DeWalt, Stihl, Husqvarna and Takeuchi Will Be On Hand For Demonstrations and To Answer Questions… . Hot Lunch and Refreshments Provided…Burgers, Brats, Sides . Machinery Demos Available . There Will Be Some Giveaways For Those Who Attend . Plus Day Only Deals On DeWalt and Husqvarna For more information on this event, go to www.mccannonline.com or contact the Wauconda Branch Store location at 1360 N. Rand Road, Wauconda, IL ; Phone: 847/526-9444. OAIMA (Ohio Aggregates & Industrial Minerals Association) The Ohio Aggregates & Industrial Minerals Association is the trade association in Ohio that represents all of the state’s mining operations except coal. PROJECT STONE – June 20-24, 2016 & June 27 – July 1, 2016 This workshop enables OAIMA producing members to develop partnerships with local schools and give teachers the opportunity to incorporate real-life earth science into inquiry based science lessons. PROJECT STONE is an annual program open to all teachers educating in Ohio’s classrooms. The spacing is limited. For more information about PROJECT STONE, please visit OAIMA.org. You may also call OAIMA at 1.800.OH.ROCKS or 614/428-7954. Fax: 614/428-7919. TDWI – Modern Data Modeling Seminar

www.constructionequipmentguide.com/ pages/customer/classifieds.asp and place your ad through our website and we will contact you!

San Francisco, CA May 23 – 26, 2016 Monday, May 23 Business Information and Modern BI: Balancing OLAP, Analytics, and Performance Management Tuesday, May 24 TDWI Dimensional Data Modeling Primer: From Requirements to Business Analysis Wednesday, May 25 Advanced Dimensional Modeling: Techniques for Practitioners Thursday, May 26 Data Modeling in the Age of Big Data Seminar Location: Embassy Suites, San Francisco Airport – Waterfront, 150 Anza Boulevard, Burlingame, CA 94010 For questions or more information on this seminar, contact info@tdwi.org. STAFDA – Specialty Tools & Fasteners Distributors Association Welcome to STAFDA! STAFDA is an international educational association comprised of distributors, manufacturers, rep agents, and affiliates (trade press) serving the construction/industrial market. We have 2,500 members from across the globe and have been serving the Construction & Industrial Channel since 1976. UPCOMING EVENTS: STAFDA’s Congressional Fly-In June 8-9, 2016 Washington, D.C. STAFDA’s 40th Annual Convention & Trade Show Atlanta, GA November 6 – 8, 2016 Georgia World Congress Center Registration materials will be mailed to members the third week of June. You must be a member to attend! STAFDA has a series of training manuals, along with benchmarking surveys, and over 65 different programs to serve your needs! We encourage you to explore our website and learn more! STAFDA 500 Elm Grove Road – Suite 210 – P. O. Box 44 – Elm Grove, Wisconsin 53122 Phone: 800/352-2981 or 262/784-4774 Fax: 262/784-5059 Info@STAFDA.org Maintenance Design Group http://maintenancedesigngroup.com/perspectives/events/ June 15-19, 2016 – APTA International Rail Rodeo The 2016 APTA International Rail Rodeo is scheduled for June 15-19, 2016, at the Sheraton Grand Phoenix, 340 N. 3rd Street, Phoenix, AZ. Maintenance Design Group http://maintenancedesigngroup.com/perspectives/events/ June 19 – 22, 2016 – APTA Rail Conference The 2016 APTA Rail Conference is scheduled for June 19-22, 2016, at the Sheraton Grand Phoenix, 340 N. 3rd Street, Phoenix, AZ. Maintenance Design Group http://maintenancedesigngroup.com/perspectives/events/ July 24-26, 2016 – APTA Sustainability & Public Transportation Workshop The 2016 APTA Sustainability & Public Transportation Workshop is scheduled for July 24-26, 2016, at the Westin Austin Downtown, 310 E. 5th Street, Austin, TX. American Business Conference Commercial Trucking Telematics Insurance Congress 2016 Spotlight On E-logging and Data Management Dates: May 25 & May 26, 2016 Place: Chicago, IL

For more information, visit the website: www.commercial-trucking-telematics-insurance.com American Business Conference Phone: 800/721-3915 2016 APWA NORTH AMERICAN SNOW CONFERENCE The Premier Event in Snow & Ice Management May 22 – 25, 2016 Connecticut Convention Center Hartford, Connecticut This conference is hosted by the APWA New England Chapter. Website: www.apwa.net/snow The 2016 Snow Conference in Hartford will bring together more than 2,000 snow fighters from every corner of the winter maintenance community. Public, private, rural, metropolitan, domestic, international – they are all sure to be there at the Show for Snow! The 2016 Conference features an exhibit floor packed with the newest equipment and products, quality education programs and technical tours, and opportunities to exchange ideas with manufacturers, distributors, consultants and other public works professionals. It is four days of winter training and networking you cannot afford to miss out on! SIMA 19th Annual Snow & Ice Symposium – Snow & Ice Management Association Dates: June 21, 2016 to June 24, 2016 Place: Rhode Island Convention Center 1 Sabin Stree Providence, RI 02903 The conference will cover areas like it is the industry’s largest conference and trade show and a favorite of snow and ice professionals. Uniquely focused on snow and ice, this event brings innovative manufacturers and suppliers together with contractors for two (2) days of trade show and four (4) days of education, networking and fun. There are plenty of opportunities to get in front of them, including exhibit space, educational sessions to banquet and reception events, and more. Join SIMA as we help educate each other on the best principles of business management, snow and ice operations, leadership and more! About SIMA: SIMA provides resources, leadership and support for snow removal and management professionals across North America. It is a non-profit trade association with a focus on training related to snow plowing, ice management, and business management. For more information on this event, website is http://www.sima.org. Venue Type: Indoor Convention Center; Venue Phone: 401/458-6000. ASSOCIATED TRAINING SERVICES NEW FACILITIES GRAND OPENING DATE: FRIDAY, JULY 15, 2016 TIME: 9 AM to 3 PM FREE LUNCH 11 AM Why Attend This Event? See New Facilities and Training Grounds JCB, Case Construction, Terex Cranes, Manitou, Mazella Sponsored Classrooms Meet ATS Training and Management Staff Talk With Our Business Development Department Establish New Partnerships Ask About Our Specialized Training Options Meet with Equipment Manufacturers and Dealers Equipment Dealers and Manufacturers Will Be On Hand Recruits ATS Graduates For Your Company ATS Students and Graduates Will Be Available ASSOCIATED TRAINING SERVICES – OPEN HOUSE 7132 Elder Lane, Corner of HWY 151 & HWY VV SUN PRAIRIE, WI 53590 Dan Swiggum, 605/354-0721 www.operator-school.com

Page 96 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: KOMATSU 380 JG-1, 580 OR 550 TRACK JAW CRUSHER LATER MODEL, LOW HOUR, WORK READY USA LOCATION CONTACT: RICHARD PH: 603-828-6100 EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: REQUIRED MACHINES FOR PURCHASE COAL BURNING ELECTRICAL PLANTS 50 TO 100 MW IN 50 HZ. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES & PRICE. CONTACT: VICTOR LEBRON PH: 864-574-0404 EMAIL: APESALES@ AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: 6" TO 12" L39 KUBOTA BACKHOE BUCKET BUCKET & A HYDRAULIC THUMB FOR L39 BACKHOE CONTACT: RALPH STEWART PH: 662-327-3552 EMAIL: RALPHCSTEWART@ BELLSOUTH.NET FAX: 662-327-3552 –––––––––––––––––––––––––––––––– WANTED: EQUIPMENT WANTED TO BUY WE BUY HEAVY EQUIPMENT AND TRUCKS! LOOKING TO BUY SKID STEERS AND MINI EXCAVATORS CONTACT: JOE PH: 570-250-5559 EMAIL: JOE@JOEDIRTMACHINERY.COM –––––––––––––––––––––––––––––––– WANTED: FORKLIFTS WE ARE LOOKING TO PURCHASE YOUR WORKING AND NON WORKING 80'S 90'S AND LATE MODELS. ALL MAKES AND MODELS!! CASH ON THE SPOT!!!! CONTACT: JOHN PH: 832-900-5824 EMAIL: JNICHOLAS.NICHOLAS MACHINE@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: BACK HOE REAR BUCKET REAR BUCKET FOR NEW HOLLAND 555D 1996 MODEL CONTACT: JOHN EMAIL: JRELKHUNT@AOL.COM –––––––––––––––––––––––––––––––– WANTED: DEERE 644K JRB QC DEERE 644K JRB QC GP BUCKET AND FORKS CONTACT: FRANK @ GROFF TRACTOR PH: 800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– WANTED: NEED EXCAVATOR EX 5600 HITACHI WANT TO BUY NOW EXCAVATOR HITACHI EX 5600 «35YARD« BETWEEN 5000 AND 12000 HOURS REAL HOURS ON THE METERS AND FRAME NOT ADVERTISED IN THE WORLD USER ONLY OR REPOSES BANK CONTACT: JEAN MAURICE BOUTIN PH: 1-450-346-8975 OR 1-514-386-8975 EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA ––––––––––––––––––––––––––––––––

WANTED: LOADER FOR 255 MF I LIVE IN CENTRAL KY CONTACT: HARRY PH: 270-402-5781 EMAIL: RICEPRESTON75@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: SMALL DOZER SMALL USED DOZER WITH 3PT HITCH AND 540RPM PTO CONTACT: TONY PH: 217-773-2670 EMAIL: TONYMATHEWSON@ YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: SKID STEERS AND MINI EXCAVATORS. CONTACT: JOE DIRT MACHINERY PHONE: 570-250-5559 EMAIL: JOE@JOEDIRTMACHINES.COM FAX: 570-364-5200 –––––––––––––––––––––––––––––––– WANTED: WANT BULLDOZER WANT TO BUY BULLDOZER D9N ENC CAB WITH RIPPER D9R, ENC CAB WITH RIPPER D10R ENC CAB WITH RIPPER KOMASTU 155AX-6 SS RIPPER 2012 AND UP NO PAST 4000 HOURS ALL UNIT FROM USER NOT ADVERTISED CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 OR 1-514-386-8975 EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: WE BUY OILFIELD EQUIPMENT WORKING OR NON WORKING WE PAY TOP DOLLAR. CONTACT: JAMIE MILLER PHONE: 713-256-6006) EMAIL: JMILLER.SOUTHERNMANCHINE@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: DEERE 644K WHEEL LOADER 4.0 YD. G.P. BUCKET CONTACT: FRANK @ GROFF TRACTOR PHONE: 1-800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– WANTED: CAT WHEEL LOADERS I AM LOOKING TO BUY RUNNING OR NON RUNNING CAT WHEEL LOADERS , MOTOR GRADER AND DOZER. CONTACT: RIZ SUNESARA PHONE: 832-528-0786 EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 832-528-0786 –––––––––––––––––––––––––––––––– WANTED: DORNIER LOOMS 30004000MM PREFER MODELS PTV/PTS FOR TECHNICAL TEXTILES. 3 LOOMS NEEDED. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES AND PRICE. CONTACT: VICTOR LEBRON PHONE: 864-574-0404 EMAIL: APESALES@AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 ––––––––––––––––––––––––––––––––

NEEDED BULLDOZER D10N AND D11N ENC CAB WITH RIPPER GOOD UNDERCARRIAGE, USA WELCOME EUROPE MUST BE GOOD PRICE. I NEED 5 UNIT. CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 OR 1-514-386-8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– LOOKING FOR 16" RUBBER PADS OR 16" CLIP ON PADS FOR A CAT 305 MIDI EXCAVATOR - HWJ03223. CONTACT: MARCEL PHONE: 519-686-1123 EMAIL: SALES@MARCELEQUIPMENT.COM –––––––––––––––––––––––––––––––– WANTED: WIRTGEN MILLING MACHINE WE NEED TO BUY WIRTGEN MILLING MACHINE W2100 AND W2200 2000 AND UP WITH MOBA CONTROLLER, IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: SAM SUNESARA PHONE: 713-855-6170 EMAIL: SALES@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: KOMATSU D37-P-2 TRACK CHAINS AND SPROCKETS IN GOOD COND CONTACT: TOM EMAIL: TSDREDGING@MSN.COM –––––––––––––––––––––––––––––––– WANTED: TOOLCAT (USED) MADE BY BOBCAT CONTACT: MARC JONES PH: 6086954397 EMAIL: MJOSYENE@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: BULLDOZER D8T WITH 45000 HOURS WANT TO BUY USA FROM USER 2 BULLDOZER D8T ENC CAB SEMI U WITH RIPPER WITH 45000 HOURS AND UP WITH UNDERCARRIAGE POOR MUST BE ALL PIECES MUST BE RUNNING I NEED 2 FAST CONTACT: JEAN MAURICE BOUTIN PH: 1 450 346 8975 OR 1 514 386 8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: CAT DRIVE MOTOR-PART # 1390848 CAT DRIVE MOTOR (ALSO CALLED A TRAVEL MOTOR), FOR A CAT EL300B EXCAVATOR. THE CAT PART # IS 1390848. CONTACT: NICK PH: (304) 232-1333 EMAIL: WVCOINC@AOL.COM FAX: (304) 233-1333 –––––––––––––––––––––––––––––––– WANTED: DEERE 644K DEERE 644K 4.25 CUBIC YARD G.P. BUCKET CONTACT: FRANK PH: 800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 ––––––––––––––––––––––––––––––––

WANTED: WE BUY EQUIPMENT MANUALS | WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS (NOT INCLUDED TRUCKS AND VEHICLES). WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. CONTACT: GRACE FRANCES PHONE: 270-849-2270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– WANTED: LOOKING TO BUY NEW OR USED EQUIPMENT MANUALS, SERVICE PARTS OR OPERATOR MANUALS WANTED: CAR HAULER TO HAUL 8' CONTACT: JOHN WHITNEY WIDE X 20' SHIPPING CONTAINERS PHONE: 530-864-0771 LOOKING FOR A CAR HAULER THAT HAS A FLATBED THAT EXTENDS DOWN EMAIL: WHITNEYJ65@YAHOO.COM –––––––––––––––––––––––––––––––– AND OUT. I USED TO USE ONE OF THESE TO HAUL 8' X 20' MOBILE STOR- WANTED: BULLDOZER 12 MONTHS USER 2013 AND UP UNDER 3000 AGE / SHIPPING CONTAINERS. THE HOURS, ENC CAB LOW LOW HOURS THING IS... THE BED HAS TO BE 102" WIDE TO ACCOMODATE THE 96" WIDE USER ONLY , AFTER ONLY USA CONTACT: JEAN MAURICE BOUTIN SHIPPING CONTAINER! PHONE: 1-450-346-8975 OR CONTACT: SHANE TERRY 1-514-386-8975 PH: 951-219-4210 EMAIL: EMAIL: SHANETERRY27@YAHOO.COM JEANMAURICEBOUTIN@VIDEOTRON.CA FAX: 951-468-4522 –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED: USED JD 35D ATTACHMENTS WANTED: CEDAR RAPIDS REMIX USED 12", 18", 30"-36", AND A 42-48" ASPHALT PAVER GRADING BUCKET. CONTACT: JD BENTLEY CONTACT: BEN PH: 660-651-2432 EMAIL: HARRISSVCS@HOTMAIL.COM EMAIL: –––––––––––––––––––––––––––––––– SUSANBENTLEY1962@YAHOO.COM WANTED: HITACHI WHEEL EXCAVA–––––––––––––––––––––––––––––––– TORS & JOHN DEERE EXCAVATORS WANTED: CAT 938G QUICK ATTACH WHEELED HITACHI EXCAVATOR EX2001 & HITACHI EX400-1. JOHN DEERE BUCKET WHEEL EXCAVATOR 595D CAT 928G QUICK ATTACH BUCKET CONTACT: RIZ CONTACT: DEBBIE PHONE: 832-528-0786 PH: 4064421399 EMAIL: RIZ@MEGAEQUIPMENTS.COM EMAIL: SLICKROCK08@GMAIL.COM –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED: CLAMSHELL BUCKETS, WANTED: REQUIRED MACHINES FOR DRAG BUCKETS, GRAPPLES, PILE PURCHASE HAMMERS AND HOISTS/WINCHES. DAVIS & FURBER WOOLEN CARD. MUST BE 2500MM (100 INCHES). IF YOU SEND PICTURES AND PRICES. CONTACT: GREG HAVE ANY, PLEASE SEND FULL PHONE 724-228-5560 DETAILS, PICTURES AND PRICE. EMAIL: NEEQUIPDIST@AOL.COM CONTACT: VICTOR LEBRON –––––––––––––––––––––––––––––––– PH: 864-574-0404 WANTED: PC400LC-7, 8 EMAIL: APESALES@AMERICANPLANLOOKING FOR 7500HR MACHINE TANDEQUIPMENT.COM CONTACT: MATT JOHNSON FAX: 864-576-7204 PHONE: 716-218-4946 –––––––––––––––––––––––––––––––– EMAIL: MJOHNSON@HRPARTS.COM WANTED: WALKING DRAGLINE –––––––––––––––––––––––––––––––– WALKING DRAGLINES OF 50M3 BKT WANTED: I WANT A FAIRLY USED CAT CAPACITY AND BIGGER. D8 74,000 POUNDS WEIGHT CATEGORY CAT,MARION,BE ETC CONTACT: KERIAN NNABUIFE CONTACT: ALEEM BAKSH PHONE: 720-327-1847 PH: +64 211263938 EMAIL: EMAIL: GCTLTD@XTRA.CO.NZ KERIAN.NNABUIFE@YAHOO.COM –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––

WANTED: NEW OR REBUILT HYDRAULIC PUMP FOR A JOHN DEERE 270CLC. CONTACT: LLOYD COOPER PHONE: 1-780-723-5051 EMAIL: LLOYD@CONTOUR CONSTRUCTION.COM FAX: 1-780-725-4430 –––––––––––––––––––––––––––––––– WANTED: ACS SERIES 1000 GP LOADER BUCKET. LOOKING FOR A 2.5 YD GENERAL PURPOSE LOADER BUCKET WITH ACS SERIES 1000 SET UP CONTACT: HEIDI EMAIL: JAWSALES1300@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CAT 988H HIGH LIFT | <10,000 HRS. PLEASE SEND PHOTOS, BEST WHOLESALE PRICE AND LOCATION. CONTACT: DAVID MOORE EMAIL: MOORE9023@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: ROLLED OVER CHIPPERS / ANY EQUIPMENT | LOOKING FOR WRECKED, ROLLED OVER, OR DAMAGED EQUIPMENT. CHIPPERS, STUMP GRINDERS, SKID STEERS, ETC CONTACT: TIM PHONE: 724-640-4396 EMAIL: LEWEQUIP@GMAIL.COM FAX: 724-887-4899 –––––––––––––––––––––––––––––––– WANTED: WANT BULLDOZER CASE 1650KLGP | WANT TO BUY FROM USA USER ONLY BULLDOZER CASE 1650KLGP RUN OR BURN 2005 TO 2009 CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 OR 1-514-386-8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: HFO GENERATOR/WARTSILA OR MAN GENERATOR | HFO = 1.5 MW CAPACITY, 50 TO 60 HZ, VOLTAGE 400/450, PHASE 3. WARTSILA = 2007 OR ABOVE, NET POWER 4MW (PREFERRED 2 GENSET), 50 HZ WITH COMPLETE AUXILIARIES, LESS THAN 50,000 RUNNING HOURS. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES & PRICE. CONTACT: VICTOR LEBRON PHONE: 864-574-0404 EMAIL: APESALES@ AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE 350C | HOOD/ENGINE COVER CONTACT: BRUCE EMAIL: DETAIL1985@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: USED 50 TON HYDRAULIC TRUCK CRANE | SEARCHING FOR 1990 OR ABOVE USED 50 TON HYDRAULIC TRUCK CRANE. UNADVERTISED -SEEN THEM. I WILL TAKE OVERSEAS SO NEED NEAR PORT IF POSSIBLE. THANKS. PICTURES PLEASE. CONTACT: BOB PHONE: 919-896-4782 EMAIL: NCNETWORKBOB@GMAIL.COM ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 97 ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Parkersburg, WV Sat., May 21, 2016 For: Large Major Job Cancellation Auction • Orlando, FL Tues., May 24, 2016 For: Rental Fleet Earthmoving Equipment & more

• Columbus, OH Thurs., June 16, 2016 • Minneapolis, MN Fri., June 17, 2016 • Atlanta, GA Tues., June 21, 2016 • Salt Lake City, UT Tues., June 21, 2016 • Houston, TX June 22 - 23, 2016

• Long Island, NY Sat., May 28, 2016 For: Late Model Rental Fleet Equipment

• Reno, NV Thurs., June 23, 2016

• Mobile, AL Tues., May 31, 2016 For: Late Model Trucks, Tractors, Construction Equipment

• Reno, NV Thurs., June 23, 2016

• Queretaro, Mexico Fri., June 3, 2016 For: Late Model Earth Moving Equipment & more • Scranton, PA Sat., June 4, 2016 For: Late Model Trucks, Heavy & Lite Construction Equipment • Hagerstown, MD Thurs., June 9, 2016 (PM) For: Late Model Rental Fleet Equipment • Kenosha, WI Sat., June 11, 2016 For: Liquidation Late Model Construction Equipment • Buffalo, NY Wed., June 15, 2016 For: 90% Liquidation Construction Equipment & more • San Angelo, TX Thurs., June 16, 2016 For: Large Rental Equipment Auction • Houston, TX Tues., June 21, 2016 For: Late Model Rental Fleet • Atlantic City, NJ Sat., June 25, 2016 For: Large Construction Equipment & more • Syracuse, NY Sat., July 16, 2016 For: Very Large Late Model Rental Return Auction • Johnstown, PA Sat., July 30, 2016 For: Large Mining and Construction Equipment • Las Vegas, NV Sat., September 10, 2016 For: Large Job Completion & Rental Returns Auction RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Jackson, MI Tues., May 24, 2016 • Pocatello, ID Tues., May 24, 2016 • Orlando, FL Wed., May 25, 2016 • Tipton, CA Thurs., May 26, 2016 • Chicago, IL Thurs., May 26, 2016 • El Paso, TX Tues., June 7, 2016 • Denver, CO Wed., June 8, 2016 • Nashville, TN Thurs., June 9, 2016 • Las Vegas, NV Fri., June 10, 2016 • Wasilla, AK Sat., June 11, 2016 • North East, MD Tues., June 14, 2016 • Sacramento, CA Tues., June 14, 2016

• Bottineau, ND Thurs., June 23, 2016

• Kenmare, ND Fri., June 24, 2016 • Raleigh-Durham, NC Tues., June 28, 2016 • Phoenix, AZ Wed., June 29, 2016 • St. Louis, MO Wed., June 29, 2016 • Kansas City, MO Wed., July 13, 2016 • Manchester, NH Tues., July 26, 2016 AARON POSNIK AUCTIONEERS & APPRAISERS www.posnik.com 413-733-5238

oming

Wed., May 25, 2016 For: Public Auction Quiram Logging

uctions

To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., June 18, 2016 For: Construction Equipment • Prospect, CT Sat., September 17, 2016 For: Construction Equipment • Prospect, CT Sat., December 3, 2016 For: Construction Equipment DEANCO AUCTIONS www.deancoauction.com MS: 601-656-9768 AL: 334-693-2540 • Philadelphia, MS May 25 - 26, 2016 For: Huge 2-Day Public Auction • Philadelphia, MS July 20 - 21, 2016 For: Huge 2-Day Public Auction • Philadelphia, MS September 14 - 15, 2016 For: Huge 2-Day Public Auction

September 14, 2016 • ONLINE ONLY September 28, 2016 HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Souderton, PA Wed., May 25, 2016 For: Complete Liquidation C&T Associates, Inc. • Union Dale, PA Wed., June 8, 2016 For: Surplus Liquidation Barhite Excavating, LLC I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Foley, MN Fri., June 10, 2016 For: Heavy Equipment • Foley, MN Fri., September 9, 2016 For: Heavy Equipment

• Kenmore, WA Sat., June 4, 2016 For: Heavy & Contractors Equipment & Vehicles • Sutherlin, OH July 13 - 14, 2016 For: Sawmill Equipment & Supplies • Kenmore, WA Sat., July 30, 2016 For: Heavy & Contractors Equipment & Vehicles • Kenmore, WA Sat., October 1, 2016 For: Heavy & Contractors Equipment & Vehicles • Kenmore, WA Sat., December 3, 2016 For: Heavy & Contractors Equipment & Vehicles JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • Midland, TX Wed., June 15, 2016 For: Absolute Truck & Equipment Public Auction MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888

QUARRICK EQUIPMENT & AUCTIONS INC. www.quarrickauction.com 724-439-1621 • Uniontown, PA Thurs., June 2, 2016 For: Construction & Agricultural Equipment RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Lebanon, TN Sat., June 11, 2016 For: Heavy Equipment, Trailers, Trucks & Commercial Vehicles • Lebanon, TN Sat., September 10, 2016 For: Construction Equipment • Lebanon, TN Mon., December 5, 2016 For: Construction Equipment ROLLER AUCTIONEERS www.rollerauction.com 866-515-1668 • Denver, CO Wed., July 13, 2016 For: Construction Equipment • Denver, CO Wed., September 14, 2016 For: Construction Equipment • Denver, CO Wed., November 9, 2016 For: Construction Equipment

• Ludlow, MA Wed., May 25, 2016 For: Concrete Contractor

• Philadelphia, MS November 16 - 17, 2016 For: Huge 2-Day Public Auction

• Foley, MN Fri., December 2, 2016 For: Heavy Equipment

• ONLINE ONLY June 6 - 9, 2016 For: Construction Equipment, Trucks, Trailers & more

RTI AUCTIONS www.teitsworth.com 585-243-1563

BIDITUP www.biditup.com 818-508-7034

EURO AUCTIONS USA www.euroauctions.com 770-683-3883

IronPlanet AUCTIONS www.IronPlanet.com 888-433-5426

• ONLINE ONLY June 20 - 23, 2016 For: Construction Equipment, Trucks, Trailers & more

• Beaver Dams, NY Tues., May 24, 2016 For: Swarthout Recycling & Construction Equipment Auction

• Atlanta, GA Tues., June 21, 2016 For: Construction Equipment & more

• Ballard, UT Wed., May 25, 2016 For: Unreserved Public Auction

NORTH COUNTRY AUCTIONS www.northcountry-auctions.com 603-539-5322

STEFFES GROUP INC. www.steffesgroup.com 701-237-9173

• Wolfeboro, NH Sat., May 21, 2016 For: Absolute Equipment Auction

• Frazee, MN Wed., June 1, 2016 For: Gemstone Masonry

• ONLINE ONLY Thurs., June 9, 2016 For: Construction Equipment & more BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE ONLY May 25, 2016 • ONLINE ONLY June 1, 2016 • ONLINE ONLY June 8, 2016 • York, NE Fri., June 10, 2016 For: NPPD Fleet Vehicle & Heavy Equipment Auction • ONLINE ONLY June 15, 2016

HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252

• St. Augustine, FL Wed., June 8, 2016 For: Unreserved Public Auction

HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493

• ONLINE ONLY June 16, 2016

• Marietta, PA Fri., June 17, 2016 For: Truck, Trailer & Equipment • Marietta, PA Fri., August 26, 2016 For: Truck, Trailer & Equipment • Marietta, PA Fri., October 14, 2016 For: Truck, Trailer & Equipment

COCHRAN AUCTIONS www.cochranauctions.com 301-739-0538

• Marietta, PA Fri., December 9, 2016 For: Truck, Trailer & Equipment

• Hagerstown, MD June 30 – July 1, 2016 For: Major 2 Day Summer Contractor’s Auction

HOUSBY AUCTIONS www.housby.com 866-218-6266

• ONLINE ONLY May 23 – June 6, 2016 For: Repossessed Commercial Wood Shaving Mill COMMONWEALTH OF PA www.auctionsbygov.com 866-469-7383 • ONLINE ONLY Tues., June 7, 2016 For: Spring Heavy Equipment Auction

• ONLINE ONLY June 2, 2016

• Livingston, LA July 28 - 30, 2016 For: Summer Construction, Truck & Farming Equipment

• ONLINE ONLY June 22, 2016

COLLAR CITY AUCTIONS www.collarcityauctions.com 518-895-8150

• ONLINE ONLY May 26, 2016

• ONLINE ONLY May 25, 2016 • ONLINE ONLY June 15, 2016 • ONLINE ONLY June 29 2016 • ONLINE ONLY July 13, 2016 • ONLINE ONLY July 27, 2016 • ONLINE ONLY August 10, 2016

• ONLINE ONLY June 9, 2016

• Edmonton, AB Wed., June 22, 2016 For: Unreserved Public Auction • ONLINE ONLY June 23, 2016 • ONLINE ONLY June 30, 2016 • Houston, TX Tues., September 20, 2016 For: Unreserved Public Auction J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • Shrewsbury, MA Sat., May 21, 2016 For: Used Heavy Equipment J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085 • Montgomery, AL June 7 - 9, 2016 For: Trucks, Construction & Forestry Auction

• ONLINE ONLY August 31, 2016

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008

• ONLINE ONLY

• Columbia Falls, MT

PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com 860-642-4200 • Ludlow, MA Fri., June 10, 2016 For: Owners Retiring F&J,Inc. • New Philadelphia, OH Fri., June 17, 2016 For: One Owner Complete Dispersal Auction

• Litchfield, MN Wed., June 7, 2016 For: Secured Party Construction Auction • ONLINE ONLY June 1 - 8, 2016 For: June Online Auction UTILITY AUCTIONS www.utilityauctions.net 302-530-9103

• North Franklin, CT June 24 - 25, 2016 For: Major Public Equipment Auction

• Wilmington, DE Fri., June 24, 2016 For: Construction, Utility & Forestry Equipment

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700

• ONLINE ONLY Tues., May 24, 2016 For: Tri-State Bobcat Turf Equipment Auction

• Princeton, MN Sat., June 11, 2016 For: Construction Equipment, Truck & Trailer Auction

• ONLINE ONLY Thurs., May 26, 2016 For: Construction Equipment

• Princeton, MN Sat., September 17, 2016 For: Construction Equipment, Truck & Trailer Auction

• ONLINE ONLY Thurs., June 2, 2016 For: Prairie Ag Business Liquidation Auction • ONLINE ONLY Thurs., June 9, 2016 For: Construction Equipment • ONLINE ONLY Thurs., June 23, 2016 For: Truck & Trailer Auction • ONLINE ONLY Thurs., June 30, 2016 For: Construction Equipment

• Princeton, MN Sat., December 10, 2016 For: Construction Equipment, Truck & Trailer Auction WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Phoenix, AZ Sat., June 11, 2016 For: Construction Equipment, Trucks & more

Page 98 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

More Than 500 People Attend 2016 Demo Day at Stowers Machinery STOWERS from page 20

(L-R): In front of the 250,000th machine manufactured at the Caterpillar plant in Sanford, N.C. are Brad Crace of Caterpillar; Wes Stowers and his daughter, Lisa Rottmann, and Larry Cummins. The machine has a special University of Tennessee wrap.

The operator of a Cat 336F excavator loads the 4043T Screen Machine impact crusher.

(L-R): Julian Bernal, Greg Farmer and Deana Sanabria, all of ExpoQuip in Knoxville, listen to Allen Hyman of Bandit go over the features of this Bandit 1890XP track chipper.

Terry Fulks (R) of Sitech Mid South explains the Trimble digital rods to (L-R) Travis Barb, Keith Parker and Nick Barb, all of N.V. Barb & Son in Bristol, Va.

The guests had an opportunity to operate two different Cat excavators — the 323F and 336F equipped with integrated GPS or grade control. The operator of a Cat 980M wheel loader loads the Screen Machine Industries scalper 107T that feeds the 612T trommel.

More than 500 guests came to demo day and enjoyed a hearty BBQ lunch.

(L-R): Bo Matherly and Brad Abstance, both of Stowers Machinery, talk with Scott Thompson and Roger Talley, both of Talley Construction in Chattanooga, Tenn.

(L-R): Frank Simerly talks with Cale Cameron and David Fields, both of Stowers Machinery, about the Screen Machine 516 screener.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 99

Wi th eq l o Go cat uipm be odlan ed in ent so ld d, KS vir tua to lly

UNRESERVED PUBLIC AUCTION BALLARD, UT TAH AH | MA AY Y 25 | 8 A.M. C omplet e Dispersal Sale from R.J . Taylor-Wya tt, LLC

Bid Onsit Onsite e or Online a att w www.IronPlanet.com ww.IronPlanet.com PIPELINE EQUIPMENT | MOTOR GRADERS | EXCAVAT ATORS | OFF-ROAD TRUCKS & MORE

PREVIEW D DAYS AYS

May 16-24 | 8 a.m. - 5 p.m.

EQUIPMENT AND A AUCTION UCTION L LOCATION OCATION

288 N 3500 E BALLARD, UT 84066

400 MISC. ITEMS, SHOP TOOLS, PARTS & ATTACHMENTS

SOLD ONLINE | MAY 25 www.IronPlanet.com Buy with confidence! Look for the IronClad Assurance logo for inspected and guaranteed items.

Prreliminary list to date. Equipment Preliminary Equ uipment subject to change. change e. © 1999-2016 IIronPlanet, ronPlanet, Inc. All Rights Reserved. ro rIonPlanet nPlanet IIronClad ronClad A Assurance ssurance e® are are re registered gister erred service marks of IrronPlanet, Inc. All other marks and brand ds are arre the property prroperty operty of their respective respective owners.

Page 100 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Apollo Acquires AmQuip Crane Rental, Maxim Crane Works Funds managed by affiliates of Apollo Global Management LLC announced that they signed definitive agreements to acquire AmQuip Crane Rental from affiliates of Clearlake Capital Group L.P. and Maxim Crane Works from affiliates of Platinum Equity. Upon the closing of these transactions, Apollo intends to combine Maxim and AmQuip, creating a premier lifting solutions provider with a modern crane rental fleet comprised of more than 1,950 cranes, a comprehensive set of value-added service capabilities and a broad geographic footprint across North America. The proposed transactions are subject to regulatory approval and customary closing conditions. Financial terms of the transactions were not disclosed. Founded in 1967, AmQuip serves more than 6,600 customers through a network of 13 branch locations across 36 states. AmQuip operates one of the youngest crane fleets in the industry with more than 550 units with lifting capacities ranging from 6 to 716 tons (5.4 to 649.5 t). Founded in 1966, Maxim serves more than 7,500 customers through a network of 31 branch locations throughout the United States. The company operates more than 1,400 cranes and is a leading provider of specialized crane and lifting solutions in North America. The combined company will include senior executives from each company, and both the AmQuip and Maxim brands will contin-

ue as part of the combined organization. Maxim’s chief executive officer, Bryan Carlisle, is expected to serve as Chief Executive Officer of the combined business. AmQuip’s Chief Executive Officer, Al Bove, will continue to run the AmQuip operation, serve on the combined company’s leadership team as well as play a senior role in the integration process. “AmQuip and Maxim share similar cultures and values relating to people, safety and the desire to serve the industry,” said Carlisle. “This combination represents an opportunity for us to build a world class organization with the best people in the crane industry. We intend to run the business in the most effective manner possible, utilizing the best practices of both organizations. This partnership will be mutually beneficial to both of our teams and, most importantly, to the customers we serve by providing an enhanced level of service, expertise, equipment and geographic coverage.” “Our companies know each other well with ties that go back more than 30 years,” said Bove. “The teams on both sides throughout each organization are made up of the most experienced lifting solutions experts in the industry, and the ability to work together going forward is exciting for everyone involved.” Larry Berg and Antoine Munfakh, partners at Apollo Global Management, said, “We are tremendously excited by this unique

opportunity to combine two premier businesses in the North American lifting services market. Both Maxim and AmQuip have built exceptional reputations and customer relationships through the depth of their employee talent and their commitment to providing the highest levels of combined organization can deepen and broaden these relationships and better serve its customers’ critical lifting solutions needs. We see many compelling growth and innovation opportunities in the market, and we look forward to bringing Apollo’s resources to bear in helping Bryan and Al achieve their long-term strategic objectives.” Platinum Equity Partner Louis Samson, who led the acquisition of Maxim, said “We are proud of everything Maxim has achieved during our stewardship. The company today is a fundamentally strong business with great leadership, talented employees, sound business practices and all the tools it needs to help lead the industry for years to come. Maxim has proven its ability to successfully grow organically and through acquisition, and now combining forces with AmQuip is a logical and exciting next step.” “We are pleased to have sponsored AmQuip during a period of significant growth and transformation. AmQuip’s foundation as a leader in the lifting solutions market, plus its top-notch safety record and stellar reputation, position the company well for its new partnership with Maxim,” said

José E. Feliciano, founder and managing partner at Clearlake. “We remain strong believers in AmQuip’s vision, people and the tremendous value they bring to this combination.” Barclays is serving as financial advisor to Apollo, Harris Williams & Co. and Oppenheimer & Co. Inc. are serving as financial advisors to AmQuip and Clearlake, and Goldman, Sachs & Co. is serving as financial advisor to Maxim. Paul, Weiss, Rifkind, Wharton & Garrison LLP is serving as legal advisor to Apollo, Stradling Yocca Carlson & Rauth and Cooley LLP are serving as legal advisors to Clearlake, and Latham & Watkins LLP is serving as legal advisor to Platinum Equity. The debt financing for these transactions is being committed to by J.P. Morgan Chase Bank N.A., Wells Fargo, Barclays, and Jefferies Finance LLC, and Cahill Gordon & Reindel LLP and Otterbourg P.C. are serving as their legal counsel. For more information about Apollo Global Management, visit www.agm.com. For more information about Maxim Crane Works, visit www.maximcrane.com. For more information about AmQuip Crane Rental, visit www.amquip.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Terramac Kicks Off RT14R Rotating Crawler Carrier Tour Terramac has partnered with its North American dealer network to launch a tow and show for its new 360-degree rotating unit, the RT14R. Terramac recently kicked off the tour with an event at its headquarters in Elburn, Ill., where the new model was unveiled. Following its debut, the RT14R will embark on a 6-week trip to be showcased to current customers and prospects throughout Terramac’s U.S. and Canadian dealer network. Attendees of each event will be educated on the RT14R’s features and benefits by Terramac representatives, as well as have the opportunity to participate in a live demonstration. “The tow and show is a great way to introduce the RT14R to end-users by providing them with a hands-on experience,” said Matt Slater, director of sales of Terramac. “We’re extremely excited about this new product and eager to demonstrate how the rotational functionality improves efficiency, safety and jobsite cost sav-

Mike Crimaldi (L), CEO of Terramac, and Andrew Konopka, president of Terramac, at the RT14R Tow & Show kick-off event at the company’s U.S. headquarters in Elburn, Ill.

ings.” Manufactured in the USA, the RT14R is made entirely of premium components. Built with a rotating upper frame, the Terramac

RT14R can carry and dump up to 28,000-lb. (12,700 kg) of material at any position, allowing it to offload materials faster than a standard straight frame unit. Equipped

with tracks that don’t need to be counter rotated the RT14R dumps material without tearing up the ground, reducing environmental damage and land restoration costs.

The 40,000-lb. (18,143 kg) machine also is powered by a QSL9.0 320-hp Tier IV Final Cummins diesel engine to boost jobsite productivity while remaining highly fuel efficient. And, its minimal 7.9-psi ground pressure while fully-loaded enables it to conquer soft or wet ground conditions and mountainous terrain, according to the manufacturer. In addition, Terramac’s new unit provides users with increased safety and easy maintenance. The RT14R enhances jobsite safety with full visibility from cab and by eliminating the amount of time an operator spends in reverse. Downtime is reduced with easy access to maintenance checks and track wear is significantly less as the unit can spin, resulting in reduced expenses for repairs. For more information, call 630/365-4800 or visit www.terramac.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 101

Online Bidding Available! Visit our Website for More Information

Full Service Auction at our Location or Yours! Located just off Hwy 169, 1 Mile North of Hwy 95 in Princeton, MN.

2001 15th St N, Princeton, MN 55371 • 763-389-5700 • Fax: 763-389-2408 www.waynepikeauction.com

Saturday, June 11, 2016 8:00 AM 2001 15th St N • Princeton, MN 55371

Construction Equipment, Truck and Trailer Auction FEATURING: Dozers, Loaders, Excavators, Backhoes, Logging, Trucks, Trailers and Construction Related Items We specialize in:

Services Offered: • • • • • • • • •

• Heavy Equipment: Excavators, Dozers, Loaders, Scrapers, Aerial Lifts, Semi Trucks, Trailers & Aggregate • All Construction Related Equipment; Attachments, Farm & Logging Equipment & Fleet Vehicles • Business and Complete Liquidations • Personal Property Auctions • Farm Auctions • Real Estate & Land Auctions • Bank Seized Assets

Appraisals Collateral Consulting for Financial Institutions Target Marketing Email Notifications Transportation Detailing Secured Storage Extensive Advertising Program Motor Vehicle Titling Services

Newly Adapted Deere 470G Proves Essential for Operation EXCAVATOR from page 12

pilots] bring up the loaded fertilizer barge alongside ours. We use the material handler we bought from Erb to unload the fertilizer, move it into a hopper and then run the material up conveyors to our warehouse.” From that 50,000-ton (45,359 t) storage facility, River Bend Ag then uses its frontend loaders to place the fertilizer into 18wheelers to take to market in a large radius that includes the southern halves of Missouri and Illinois, northern Arkansas, and western Kentucky and Tennessee. Miller said that since taking possession of the new material handler at the first of the year, it has worked exactly the way he had hoped and it has been in operation most days. The company unloads year round, but is busiest from March through June, when his crew is unloading dry-bulk fertilizers such as potash, phosphate and urea. River Bend Ag also maintains five huge tanks for storing liquid fertilizer, which it pumps directly off the barges through a

pipeline. The company’s river dock, warehouse and storage tanks are located on private property just southwest of the town of New Madrid and along one of the great loops of the Mississippi River in the bootheel of Missouri. The site is in a narrow strip between the river to the east and Interstate 55 to the west, making the transit of fertilizer from river to warehouse to trucks to market very efficient. Erb Equipment serves customers in southeast Missouri up through St. Louis, as well as southern Illinois, southern Indiana and western Kentucky. Besides its Cape Girardeau flagship store, its other Missouri locations are in Fenton, Foristell and Cuba. The other dealerships are in Mt. Vernon, Ill., Evansville, Ind., and in Paducah and Owensboro, Ky. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

2006 980H Wheel Loader: Meter Reads: 14,600 Hrs, 8 Yd Bkt, Bolt on Cutting Edge Great Condition, Tires Great Tread

American 4450 Quad Crane: OD Reads: 17,342, Meter Reads: 112 Hrs, Cummins 8Cyl Diesel Engine, 161''L Lathe Boom In Excellent Cond, 50' JIB, 4 Outriggers W/ 32" Pads

2008 KW T-800 Tri Sleeper: Cummins ISX 550Hp Engine, EF 18Sp Trans, OD Reads: 810,906, 72" Sleeper, Steerable Pusher Axle, Axle Wt 12k/20k, Rr End 3.73, Wet Kit

Page 102 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALEX PARIS CONTRACTING CO INC....................................................................9 ALLIED CONSTRUCTION PRODUCTS ................................................................77 ALLU GROUP ........................................................................................................57 AMERICAN STATE EQUIPMENT ............................................................................7 ARING EQUIPMENT CO INC ................................................................................17 ARTIC SNOW & ICE CONTROL ..........................................................................58 ASC CONSTRUCTION EQUIP USA......................................................................11 ATI CORPORATION/LEVEL BEST ........................................................................57 BANDIT INDUSTRIES INC ....................................................................................83 BARGAINS ........................................................................................................93,94 BOBCAT ENTERPRISES ......................................................................................16 BROOKS TRACTOR ..............................................................................................31 CATERPILLAR INDUSTRIAL ................................................................................78 CEG SCALE MODELS ..........................................................................................30 CLASSIFIEDS ........................................................................................................95 CLEARSPAN FABRIC STRUCTURES ..................................................................29 CONSTRUCTION EQUIPMENT GUIDE AIR COMPRESSOR PROMO ....................................................................34 FELLING EW SLEEPER & MIDCO TESTIMONIAL ....................................50 WANTED......................................................................................................96 NEWSLETTER SELL SHEET......................................................................70 CUSTOM MADE PRODUCTS ................................................................................6 DOOSAN INFRACORE AMERICA CORP ............................................................52 DOOSAN PORTABLE POWER ............................................................................60 DOPPSTADT ..........................................................................................................78 DYNAPAC ..............................................................................................................59 ERB EQUIPMENT..................................................................................................15 FABICK CAT ............................................................................................................2 FARM-RITE EQUIPMENT INC ..............................................................................10 FELLING TRAILERS ..............................................................................................48 FINKBINER EQUIPMENT CO..................................................................................7 FLANGE LOCK ......................................................................................................31 FLUID CONTROL SERVICES ..............................................................................29 FOLEY EQUIPMENT CO ......................................................................................19 FURY MOTORS ....................................................................................................47 FURY PARTS & SERVICE ....................................................................................40 GARY CARLSON EQUIPMENT ..............................................................................8 GRINDERCRUSHERSCREEN.COM ....................................................................86 GROVE WORLDWIDE ..........................................................................................61 HOWELL TRACTOR & EQUIPMENT CO............................................................104 HYDRAULICIRCUIT TECHNOLOGY ....................................................................57 ILLINOIS TRUCK & EQUIPMENT ..........................................................................3 IRAY AUCTION FOLEY MN ................................................................................................101 IROCK CRUSHERS ..............................................................................................86 IRONPLANET BALLARD UT ..............................................................................................99 JEFF BELZER ........................................................................................................45 JJ SCHECKEL........................................................................................................22 JOHN DEERE ........................................................................................................32

KAWASAKI CONSTRUCTION MACHINERY ........................................................35 KLEEMAN ..............................................................................................................85 KOBELCO ..............................................................................................................66 KOMATSU AMERICA CORP ............................................................................36,62 KPI-JCI ..................................................................................................................81 KUBOTA ................................................................................................................68 LEONARD TRUCK & TRAILER ............................................................................42 LIUGONG CONSTRUCTION MACHINERY ..........................................................25 M.H. EBY INC ........................................................................................................43 MCCANN INDUSTRIES INC....................................................................................6 METSO MINERAL CRUSHING..............................................................................75 METSO MINERAL SCREENING ..........................................................................92 MID COUNTRY MACHINERY................................................................................27 MISSISSIPPI VALLEY............................................................................................29 MUELLER IMPLEMENT & RENTAL CO................................................................32 MUSTANG MFG ....................................................................................................69 NORAM ..................................................................................................................64 PATTEN TRACTOR & EQUIPMENT CO ..............................................................23 POWERSCREEN MW DEALER ............................................................................80 RANSOME EQUIPMENT SALES LLC/LRH ..........................................................96 RDO EQUIPMENT/MINNESOTA ..........................................................................21 RITCHIE BROS. AUCTIONEERS ........................................................................103 ROAD BUILDERS MACHINERY ......................................................................13,56 ROGERS BROTHERS CORP ..............................................................................51 ROLAND MACHINERY INC ....................................................................................5 RR EQUIPMENT ....................................................................................................89 SANY AMERICA INC..............................................................................................64 SCREEN MACHINE INDUSTRIES ........................................................................91 SENNEBOGEN ......................................................................................................87 SMITHCO ..............................................................................................................51 STAR EQUIPMENT LTD ..........................................................................................6 STOWERS CAT ....................................................................................................76 TEREX COMPACT ................................................................................................54 TEREX CRANES....................................................................................................71 TEREX FUCHS ......................................................................................................88 TEREX POWERSCREEN ......................................................................................84 THE VICTOR L PHILLIPS CO ..............................................................................24 TOWMASTER INC ................................................................................................41 UNIQUE TRUCK ACCESSORIES ........................................................................42 WAYNE PIKE AUCTION PRINCETON MN ......................................................................................101

OHIO STATE SUPPLEMENT COLUMBUS EQUIPMENT CO ................................................................................8 COMPANY WRENCH ..............................................................................................5 EQUIPMENT CORP OF AMERICA ........................................................................7 HIGHWAY EQUIPMENT COMPANY OF OH ..........................................................3 JCB OF OHIO ..........................................................................................................4 KUBOTA SVL ..........................................................................................................7 THE MCLEAN CO ....................................................................................................6

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 21, 2016 • Page 103

Unreserved Unr reserrved p public ublic equipment auctions Fast, Fast, flexible fleexxible financing financing available available – up up to to 100%, $0 down down

2011 Senneboge en 835 | Columbus

John Deere 650H LGP | Columbus

2013 Case 721F | Chicag go

1 of 2 – 2012 Bobcat 324 | Chicago o

1 of 2 – 2012 Caterpillar D6N LGP | Orlando

2011 Caterpillar 12M VHP | Orlando

2008 Terex R RT1120 T1120 120 Ton 4x4x4 | Orlando

Terex Ced e arapids CSC380 | Jackson

2 of 4 – 2014 John Deere 410E 43.5 Ton Minneapolis

2009 John n Deere 225D LC | Nashville

1 of 3 – 2012 Mack GU713 Granite | Nashville

4 of 7 – 2012 John Deere 310K 4x4 | Atlanta

38,960+ items items in 95+ auctions inc including luding Jackson, MI Pocatello, ID Orlando, FL Tipton, CA Chicago, IL El Paso, TX

May 24 May 24 May 25 May 26 May 26 Jun 7

Denver, CO Nashville, TN Las Veg ega as, NV Wasilla, AK Norrth East, MD Sacramento, CA

Jun 8 Jun 9 Jun 10 Jun 11 Jun 14 Jun 14

Motor VVehicle Motor ehicle Broker Broker De Dealer aler # D001182, VVendor's endor's License #U-ME-1035901, #U-ME-1035901, Au Auction ction Firm License # 444.000193, Auctioneer Auctioneer Greg Greg M. Highsmith Highsmith # 441.000865 Auction Au ction CCompany ompany Bond #0470724, Au Auctioneer ctioneer CChad had M. Johnson # 17668, Au Auction ction Firm #2389, Auctioneer Auctioneer Eddie Eddie R. Graham Graham #2237, Auction Auction Firm # 2008000166 Auctioneer Auctioneer Fr Frederick ederick R. VVilsmeier ilsmeier # 2004000137, Au Auction ction CCompany ompany Bond #0470724, Au Auctioneer ctioneer Greg Greg Highsmith Highsmith Bond # 0470728, Motor Motor Vehicle Vehicle Dealer Dealer License #DLR25867 #DLR25867 Auctioneer Auctioneer Gregory Gregory M. Highsmith Highsmith # 7015013, Used Used Motor Motor Vehicle Vehic eh le Dealer Dealer License #2647, Au Auctioneer ctioneer Chad Chad M. Johnson # 17668, Ritchie Ritchie B Bros. ros. Au Auctioneers ctioneers (Americ (America) a) Inc. Inc. Auction Auction Clerk Clerk License #225 Auctioneer Auctioneer Gregory Gregory M. Highsmith Highsmith # 701, Ritchie Ritchie Bros. Bros. Auctioneers Auctioneers (America) (America) Inc. Inc. Auction Auction Clerk Clerk License #225, Auctioneer Auctioneer Gregory Gregory M. Highsmith Highsmith # 701, Auction Auction Firm License # 444.000193 Auctioneer Auctioneer Greg Greg M. Highsmith Highsmith # 441.000865, Auction Auction Firm License #6980, Motor Motor Vehicle Vehicle Dealer Dealer License #0061711, Auction Auction Company Company License # 001348, Auctioneer Auctioneer Gregory Gregory S. S. Fuqua Fuqua #AU002665 #AU002665 OAC. OAC. Terms Terms & conditions conditions apply. apply.. See See rbauction.com/financing. rbauction.com/financing.

Columbus, OH Minneapolis, MN Atlanta, GA

Jun 16 Jun 17 Jun 21

Financing & leasing available Up to 100% financing, with no moneyy down.

Bid in person or online ▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public, free registration

More items added daily Call about selling: 1.800.211.3983

rbauction.com See full auction & equipment listing gs at rbauction.com

Page 104 • May 21, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Now Available for Immediate Delivery:

GTC-1200

TELESCOPIC BOOM CRAWLER CRANE 2015 130 ton capacity 42-155 ft. of boom