Midwest 19 2014 by Construction Equipment Guide

Published Nationally

$3.00

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 4

Midwest Edition

www.constructionequipmentguide.com

September 13, 2014 • Vol. IXX • No. 19 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910

Inside

Bridging the Gap for Women in Construction By David Crary AP NATIONAL WRITER

Cloud Computing to Reinvent Business...8

NEW YORK (AP) Janice Moreno graduated from college with a degree in English literature, but never landed a job paying more than $12 an hour. Now, at 36, she’s back in the classroom — in safety

glasses and a T-shirt — learning how to be a carpenter. “I anticipate a lot of hard work,’’ she said amid instruction in sawing techniques. “I believe it’s going to pay off.’’ If Moreno’s six-week training program in New York City leads to a full-time job, she’ll have bucked

long odds. According to the latest federal data approximately 7.1 million Americans were employed in construction-related occupations last year — and only 2.6 percent were women. That percentage has scarcely budged since the 1970s, while women have made gains since then

The main span will be supported by two cast-in-place 316-ft. (96 m) tall deltashaped towers, founded on large diameter drilled shafts with rock sockets.

Table of Contents ................4 Attachment & Parts Section ......................................41-45 Truck & Trailer Section ........ ......................................47-55

see WOMEN page 74

Industry Marks New Spending High Since 2008

Bobcat Opens New Acceleration Center...20

Kip Moore Honors Industry Members...39

in many other fields. Even in firefighting — where they historically were unwelcome — women comprise a greater share of the workforce at 3.5 percent. Why the low numbers, in an industry abounding with high-paying jobs that don’t require a college

The two-lane structure will provide two 12-ft. (3.7 m) driving lanes and two 4 ft. (1.2 m) shoulders for a total width of 32 ft. (9.7 m).

Ironton-Russell Replacement Marks Largest Ohio Span By Brenda Ruggiero CEG CORRESPONDENT

Crews in Ohio are currently working on a

Snow & Ice Section ......61-65 bridge with the longest span that the Ohio Department of Transportation (ODOT) has ever

Recycling Section ........79-95 constructed — a total of 900 ft. (274 m).

Connecting the cities of Ironton, Ohio, and

Business Calendar ............96 Russell, Ky., the Ironton-Russell Bridge replaceAuction Section ......100-109

ment project entails the construction of a cast-inplace concrete, cable-stayed bridge over the Ohio River with structural steel approaches and rein-

Advertisers Index ............110

see BRIDGE page 78

The main span unit consists of three spans; two flanking spans at 370 ft. (112 m) each and the center span of 900 ft. (274 m).

All major categories of construction spending increased in July and total construction reached the highest level since December 2008, according to an analysis by the Associated General Contractors of America. Association officials welcomed the robust spending figures, but cautioned that growing demand will put new pressure on an already tight labor market. “It is encouraging to see signs of a broad-based recovery in private construction along with a recovery — at least for now — in public construction investment,” said Ken Simonson, the association’s chief economist. “Private nonresidential construction should remain strong through the rest of 2014 and beyond, while residential spending is likely to keep growing, though at a more moderate pace. However, funding is still inadequate for needed public infrastructure improvements.” Construction spending in July totaled $981 billion at a seasonally adjusted annual rate, up 1.8 percent from the June total, which was revised substantially higher than the initial estimate, Simonson noted. The July total was 8.2 percent higher than in July 2013. Private nonresidential spending increased 2.1 percent from June and 14 percent from a year earlier, while private residential spending grew 0.7 percent for the month and 8.0 percent year-over-year. see SPENDING page 72

Page 2 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

PROVIDING THE BEST IN

USED EQUIPMENT 2003 Cat 725 ..........................................$79,000

2004 Cat D6R..........................................$81,000

1999 Volvo L70C....................................$39,500

2001 Komatsu HD325-6 ....................$137,500

S/N AFX00708, 6425 Hrs, 13,682 Hrs on Frame, Tires Good, Body Good

S/N ADE00479, 11,088 Hrs, EROPS, S Blade, Undercarriage on Run Out, Drawbar

S/N V15854, Hrs Unknown, Meter Reads 7517, EROPS, Bucket, Tires Good, Hyd Coupler

s/n 5907, 13,525 hours, EROPS, tires, body and sheet metal all good

2004 Volvo L60E....................................$59,500

2006 Kobelco SK480 ............................$65,000

2006 Cat 966H ....................................$179,500

2011 Cat 262C........................................$33,000

S/N V60363, hours unknown, EROPS, bucket, lug tires fair, hyd coupler

S/N YS06U0571, 9187 Hrs, EROPS, LongStick, Bucket, Undercarriage Fair

S/N A6G00225, 8535 Hrs, EROPS, A/C, GP-bkt, tires good, engine rebuilt at 7422 hours

S/N MST03900, 2520 Hrs, EROPS, A/C, Hyd Quick Coupler, 2-Speed, Bkt, Tires Fair

2003 Hitachi ZX600LC........................$110,000

2011 Cat 966K4....................................$225,000

1991 CAT 772B ....................................$85,000

1999 Cat D6M LGP ..............................$69,000

S/N 004015, 10,484 Hrs, EROPS, Undercarriage Fair, Coupler, Bkt

S/N TFS00170, 11,515 Hrs, Bucket, Tires Good, EROPS, A/C, Auto Lube

S/N 64W00186, 34,542 Hrs, EROPS, body good, tires good, good for age

S/N 2RN00542, 10,370 Hrs, EROPS, PAT blade, winch, rear screen, under carriage good

2001 Cat 988G ....................................$152,500

1993 Ingersoll Rand ST105 ..................$6,500

2008 Cat 297C XPS ..............................$32,500

2004 Cat D6RLGP DSII ........................$81,000

S/N 2TW00170, 22,305 Hrs, EROPS, Spade Bkt w/Teeth, Tires - 2 Good - 2 Fair

S/N 5137, 5169 hours, no ROPS, runs good, drums good

S/N GCP00782, 5370 Hrs, EROPS, A/C, High Flow, Bkt, 2-Speed, Self-Leveling, Tracks Good, New Drive Motor at 5365 Hrs

S/N ADE00479, 11,090 Hrs, EROPS, A/C, S Blade, Drawbar, Undercarriage On Run Out

Contact: Jeff Speer

FABCO Equipment Inc. 11200 W. Silver Spring Rd., Milwaukee, WI 53225

800.353.1944 ... For Used Equipment 877.754.4477.... For Used Work Tools & Attachments 414.461.9100 ... In WI and Upper Michigan

www.FABCO.com Hundred of machines. Listings updated daily.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 3

Including:

150 Hydraulic Excavators ator ors Long Reach Excavators

75 5 Bulldozers B lld • Angle Blades & W Winches inches A Available vailable

Larrge Largest gest est Indep Independent pendent R Rental ental F leet in the Mid west! es Fleet Midwest! Over Ov ver 1000 0 units uni available a vailable for for rrent! e ent!

50 0 Wheel Loaders Mantis Cranes 30-100 T Ton on

35 Articulated Dump Trucks Trucks O On/Off Road W Water ater Trucks Tru rucks cks s

Illinois T Truck ruck & Equipment 320 Briscoe Drive Morris, Illinois 60450 www.iltruck.com www.iltruck.com T Toll oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: rental@iltruck.com & sales@iltruck.com

Page 4 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWesT eDITIon

In ThIs Issue 8

Circulated Throughout

Founder, Publisher & CEO Midwest Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Main office

To r e a d t he s e s t o ri e s a nd ma ny m o re , v is it w w w . co n s t r u ct io ne q ui pm e nt g uid e . co m

specIal secTIon 79 RECYCLING, CRUSHING AND SCREENING

24 JCB TACKLES ALS ICE BUCKET CHALLENGE IN A BIG WAY Those who donated due to the cause received the cold shower of a lifetime when

Be sure to check out this special section! Keep up to date with the latest information on recycling,

multiple JCB backhoes doused them with enormous buckets full of icy water.

crushing and screening.

27 CASE CONSTRUCTION AWARDS LUBY DIAMOND

THE CLOUD CHANGES FIELD-TO-OFFICE COMMUNICATION Cloud computing is not quite as omnipresent as the computer in Star Trek, but…give it time. Cloud computing, or “the cloud,” is an interconnected group of powerful computers that collectively store data redundantly, host various services, and provide security.

12 ROADBUILDERS HOSTS HYDRAULIC QUICK COUPLER SAFETY CLASS The event was sponsored by RoadBuilders and JRB/Paladin Attachments to promote the importance of jobsite safety and proper use of attachments.

12 ILLINOIS TO SPEND ANOTHER $102M ON HIGH-SPEED RAIL The state of Illinois will spent $102 million to build a bridge over the Kankakee River along with other improvements as part of high-speed rail upgrades between Chicago and St. Louis.

18 LOUISVILLE CONTRACTOR EXPERIENCES ZERO DOWNTIME WITH GORILLA HAMMER Tim Peters of Louisville Paving and Construction Company said that from an owner/operator standpoint, the Gorilla hammer has been an excellent investment. He has experienced very little downtime with hammer issues and the only money the company’s had to put into the hammer is for normal wear and tear replacement parts.

20 BOBCAT, DOOSAN OPEN DOORS OF NEW ACCELERATION CENTER Bobcat Company and Doosan recently opened the doors to their new Acceleration Center, ushering in a generation of advanced product innovation and accelerated learning to benefit customers, dealers and employees worldwide.

Joseph S. McKeon • Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

773/769-4090 800/632-0233 773/769-4280 e-mail jmckeon@cegltd.com

As a Case dealer since 1992, Luby’s recognition as a high-performing dealership has been achieved by embracing the concept of delivering “stronger products, stronger people, and stronger support.”

Toll Free Fax

34 TEREX RT 670-1 ROUGH-TERRAIN CRANE IN

Contact

ELEMENT ON FARM

Ed Bryden • Central and Eastern Indiana • Michigan • Ohio • Kentucky

When establishing a construction business in rural Iowa, there are a couple of certainties. First, the company will need to be flexible enough to either take on a broad range of work or travel long distances for jobs to remain profitable. Second, there will most definitely be a heavy dose of agriculture related projects.

Toll Free Fax

39 KIP MOORE DEBUTS VIDEO HONORING MEN,

Contact

440/268-9690 800/810-7640 440/268-9691 e-mail ebryden@cegltd.com

WOMEN OF THE CONSTRUCTION INDUSTRY

72 SULLAIR EXPANDS RELATIONSHIP WITH

470 Maryland Drive Fort Washington, PA 19034

215/885-2900 800/523-2200 215/885-2910 Web site www.constructionequipmentguide.com Editorial e-mail editorial@cegltd.com Advertising e-mail production@cegltd.com For advertising rates Contact

The song, “On the Case,” is a personal homage to his fanbase and the hardworking people that have inspired and supported him throughout his career.

Edwin M. McKeon Sr. Joseph S. McKeon Craig Mongeau Christine Reckner Pete Sigmund John Pinkerton Tom Weinmann Cathy Printz

Toll Free Fax

DEALER STATUS

feaTures

• North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota • South Dakota

952/353-1770 866/413-4265 952/353-2750 e-mail pkiel@cegltd.com

Toll Free Fax

BRABAZON PUMP, COMPRESSOR & VACUUM As part of this expansion, Brabazon recently opened a new 15,000 sq.-ft. facility in Saint Peters, Mo., and the company plans to open an additional facility in Decatur, Ill., for the spring of 2015.

Mobile

Facebook

Twitter

YouTube

equIpMenT

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

48 XL TRAILERS 110 Low-Profile HDG Trailer 52 TOWMASTER T-120DTG Detachable Gooseneck 52 KENWORTH Allison FuelSense Packages

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

DeparTMenTs

22 USING MOBILE TECHNOLOGY INCREASES

96 CLASSIFIEDS

PRODUCTIVITY ON JOBS

96 BUSINESS CALENDAR

Field workers in construction are using mobile technology — apps, devices, services — to increase their productivity and decrease project costs.

100 COMING AUCTIONS

Contents Copyrighted ©2014, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 5

Quality Used Equipment...with support to back it up

LeeBoy 8500HD,’04..................................$24,500

Komatsu WA500-3, ’98, 11,556 hrs ........$79,500

DOZERS

COMPACTION

CRUSHING/SCREENING

EXCAVATORS

Case 1150K LGP, ’06, 1,900 hrs ..............$70,000

Bomag BC61RB, ’00, 15,862 hrs ............$59,900 Bomag BC1172RB, ’05, 15,531 hrs ........$99,900 Bomag BW205AD, ’02, 3,520 hrs ............$34,500 Hamm HD14VV, ’09, 2,460 hrs ................$29,500 Hamm HD90 Ozzy, ’04, 4,300 hrs ............$54,500 Volvo DD90HF, ’09, 638 hrs ....................$59,500

Doppstadt SM726 Screen, ’09, 257 hrs $225,000 Kleemann MSD190D Screen, ’13, 688 hrs ............ ................................................................$255,000 Kleemann MC110Z Crusher, ’13, 714 hrs.............. ................................................................$475,000

Cat 330CL, ’02, 12,032 hrs ......................$69,500 Cat 345BL, ’03, 10,750 hrs ......................$72,500 Cat 385CL, ’06, 9,646 hrs ..........................$CALL Deere 350DLC, ’07, 5,837 hrs ..............$124,500 Deere 350DLC, ’07, 6,832 hrs ..............$115,000 Gradall XL4100 III, ’09, 5,191 hrs ........$130,000 Hitachi ZX160LC, ’05, 5,876 hrs..............$59,500 Kobelco SK400LC Mark IV, ’97 ................$38,500 Komatsu PC35MR-2, ‘07, 4,747 hrs ........$26,500 Komatsu PC88MR-8, ‘09, 1,195 hrs ........$74,500 Komatsu PC138USLC-8, ’11, 1,142 hrs $124,500 Komatsu PC138USLC-8, ’11, 3,218 hrs $104,500 Komatsu PC160LC-7, ’05, 8,230 hrs........$54,500 Komatsu PC200LC-6, ’01, 5,824 hrs........$59,500 Komatsu PC200LC-7, ’02, 6,850 hrs........$84,500 Komatsu PC200LC-7, ‘03, 8,114 hrs........$79,500 Komatsu PC200LC-7, ’03, 5,975 hrs........$89,500 Komatsu PC200LC-7, ’03, 6,128 hrs........$69,900 Komatsu PC200LC-7, ’04, 7,640 Hrs ......$89,500 Komatsu PC200LC-8, ’06, 5,102 hrs......$109,500 Komatsu PC200LC-8, ’06, 4,621 hrs........$97,500 Komatsu PC220LC-8, ’06, 9,084 hrs........$96,500 Komatsu PC220LC-8, ’06, 2,606 hrs......$139,500 Komatsu PC220LC-8, ’07, 5,757 hrs......$119,500 Komatsu PC220LC-8, ’09, 4,707 hrs......$129,000 Komatsu PC300LC-6, ’99, 16,882 hrs......$39,500 Komatsu PC300LC-7EO, ’06, 6,320 hrs ..$99,500 Komatsu PC300LC-7EO, ’06, 7,736 hrs $110,000 Komatsu PC360LC-10, ’14, 655 hrs ......$269,500 Komatsu PC400LC-7, ’04, 10,300 hrs......$99,500 Komatsu PC400LC-7, ’05 8,163 hrs ......$124,500 Komatsu PC400LC-7, ’05 11,134 hrs ......$92,500 Komatsu PC400LC-7EO, ’07, 3,991 hrs $204,500 Komatsu PC400LC-8, ’08, 3,815 hrs......$209,500 Komatsu PC450LC-8, ’11, 2,389 hrs......$309,500 Komatsu PC600LC-7, ’05, 10,328 hrs....$199,500 Komatsu PC600LC-7, ’05, 4,910 hrs......$369,500 Komatsu PC600LC-8, ’06, 10,478 hrs....$199,500 Komatsu PC650LC-5, ’95, 17,615 hrs......$42,500 Komatsu PC750LC-7, ’04, 6,613 hrs......$349,500 Volvo EC240CLR, ’11, 454 hrs ..............$195,500

Deere 455G, ’96, 6,864 hrs......................$24,500 Komatsu D51PX-22, ’08, 4,013 hrs ......$124,500 Komatsu D61PX-15EO, ‘07, 4,771 hrs ..$120,000 Komatsu D65EX-15EO, ’07, 3,934 hrs ..$149,500 Komatsu D155AX-6, ’07, 6,524 hrs ......$239,500 Komatsu D275AX-5, ’03, 23,015 hrs ......$99,500

WATER EQUIPMENT

MILLING

Komatsu HM300-2, ’06, 6,500 gal ........$275,000 Komatsu HM400-2, ’07, 8,000 gal ........$395,000

Roadtec RX700, ’08, 4,630 hrs..............$170,000 Wirtgen W60, ’08, 628 hrs ....................$144,900 Wirtgen W60 Rumbler, ’11, 400 hrs......$240,000 Wirtgen W600, ’03, 2,403 hrs..................$77,500 Wirtgen W2100, ’04, 8,373 hrs ..................$CALL

PAVING Blaw-Knox PF115, ’08, 1,921 hrs ............$14,500 LeeBoy 8500HD, ’04 ................................$24,500 LeeBoy 8500LD, ’08, 910 hrs ..................$74,500 Vogele 1110WB, ’05, 3,139 hrs ..............$54,500 Vogele 1110WB, ’03, 1,004 hrs ..............$85,000 Vogele 5103-2, ’11, 1,273 hrs ..............$250,000

WHEEL LOADERS Komatsu WA65-3, ’04, 745 hrs................$59,500 Komatsu WA70-5, ‘06, 2,592 hrs ............$47,500 Komatsu WA320-6, ’08, 3961 hrs..........$126,500 Komatsu WA320-7, ’14, 81 hrs..............$165,000 Komatsu WA380-6, ’11, 2,094 hrs ........$179,500 Komatsu WA380-7, ’13, 1,385 hrs ........$185,000 Komatsu WA430-6, ’07, 4,404 hrs ........$134,900 Komatsu WA450-6, ’07, 8,069 hrs ........$149,500 Komatsu WA500-3, ’98, 11,556 hrs ........$79,500 Komatsu WA470-6, ‘11, 5,520 hrs ........$179,500 New Holland LW190B, ’04, 5,908 hrs......$33,500 Terex TL300-2, ’08, 2,441 hrs..................$79,500

Deere 648G III, ’04, 13,150 hrs ........................$55,000

V I S I T

GRADERS Komatsu GD655-3C, ’06, 1,866 hrs ......$159,500 Komatsu GD655-3EO, ’09, 1,287 hrs ....$189,500

FORESTRY Deere 490D/Rolly Head, ’88, 12,000 hrs $39,000 Deere 648G III, ’04, 13,150 hrs ..............$55,000 Norco Puma 220, ’11, 78 hrs ....................$CALL Ponsse Cobra HS10, ’98, 20,013 hrs ......$75,000 Valmet 415EX/Rolly II, ’05, 10,092 hrs $135,000 Valmet 840, ’02, 13,000 hrs ....................$60,000 Valmet 840.2, ’05, 6,600 hrs......................$CALL Valmet 860.4, ’12, 1,640 hrs......................$CALL Valmet 911.3, ‘08, 8,655 hrs ................$235,000

MATERIAL HANDLERS Cat 365CL-MH, ‘08, 10,428 hrs ............$164,500 Komatsu P400LC-8MH, ’08, 6,095 hrs ..$219,500

Komatsu PC200LC-7, ’02, 6,850 hrs..........$84,500

Financing Available for Qualified Buyers

15 Roland Branch Locations in IL, IN, MI, MO, and WI

Call Jay Germann (217) 789-7711 • Email: jgermann@rolandmachinery.com

R O L A N D M A C H I N E R Y . C O M

Page 6 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke • (630) 739-7770

Excavator Rental Specials Bolingbrook, IL

Serving the Constructor ®

View our complete Used & “Like New” inventory at McCannOnline.com

Clean, reliable equipment

Competitive rates

Rent by the day, week, or month

Illinois

Delivered to your job site

Addison 630-627-0000 Bolingbrook* 630-739-7770

2012 Case 850L, s/n NCD80092, 700 Hrs, 2011 Case 580SN, s/n JJGN58SNKAC536021, 1998 Case 1840, s/n JAF0221937, 2800 Cab w/Heat & AC, 124” Blade, 24” Grousers 2480 Hrs, Cab w/Heat & AC, Extenda-Hoe, Hrs, Rops, Aux Hyds, 60” Bkt, 10 x 16.5 ......................................................$120,000 Ride Control, Two Lever, 4 in 1 Bkt, Aux Hyds, Tires ..................................................$8,500 12”, 18” and 24” Bkts ....................$64,750

2012 Case Cx250CLR, s/n DAC250K6NCSAM1210, 500 Hrs, 60’ Long Reach, Control Pattern, 60” Ditch Bkt .......... ......................................................$230,000

Chicago 312-942-9200 Crestwood 708-597-3110

CX130 Excavator

CX160 Excavator

CX210 Excavator

CX225 Excavator

MC r h EJH EFQUI $410/Day, $1,230/Week, $3,690/Month

MC r h EJH EFQUI $475/Day, $1,425/Week, $4,275/Month

MC r h EJH EFQUI $580/Day, $1,740/Week, $5,220/Month

MC r h EJH EFQUI $755/ Day, $2,265/Week, $6,795/Month

McHenry* 815-385-0420

Rent Today!

Wauconda 847-526-9444 2012 Case SV250, s/n JAFSV250JBM435496, 100 Hrs, Cab w/Heat & AC, Two Speed, Hyd Coupler, 78” Bkt, 33 x 15.5 Tires ....................................$43,500

2012 Case SV185, s/n 2012 Case SR150, s/n JAFSR150JCM42107, JAFSV185PBM429437, 325 Hrs, Cab 184 Hrs, Cab w/Heat, 1 Speed, Manual w/Heat, Two Speed, Manual Coupler, 72” Coupler, 66” Bkt, 10 x 16.5 Tires ....$28,000 Bkt, 12 x 16.5 Tires ........................$32,000

CX240 Excavator

CX330 Excavator

MC r h EJH EFQUI $700/Day, $2,100/Week, $6,300/Month

MC r h EJH EFQUI MC r h EJH EFQUI equipment. Call us today to supply your next $875/Day, $2,625/Week, $7,875/Month $1,235/Day, $3,705/Week, $11,115/Month

2010 RoadHog, s/n 0904008RH40140TLT, 150 Hrs, 40” Cut, 30” Side Shift, Tilt, Water, 140Hp Deere ..................................$88,000

McCann CX460 Rents aExcavator full line of heavy and light construction rental. McCannOnline.com

Star Equipment

STAR

Construction Equipment & Supplies Sales • Service • Rentals

EQUIPMENT LT D .

www.starequip.com 877-267-7203 Des Moines • Ames • Cedar Rapids • Waterloo

2005 Mustang 2054 Skid Loader, #00626923020, 2465 Hrs ....................Call

2006 Gehl RS842 Rough Terrain Forklift, #215758, 2818 Hrs ......................$43,995

2011 Takeuchi TW80C Articulating Loader, #110930, Cab, Heat, A/C, 260 Hrs ..$60,950

1987 John Deere 575 Skid Loader, #370721, 33HP, Open ROPS, 1775 Hrs ..............$5,995

*Case authorized dealer location

1985! e c n i S

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

www.RBusedParts.com 2012 Takeuchi TL240 Track Loader, #0018062322, 86HP, Open ROPS, 278 Hrs ......$41,995

Indiana Schererville* 219-865-6545

CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 7

View us at: www.amstate.com

PAVERS / ROAD WIDENERS CEDAR RAPIDS CR662RM - ‘10, 1611 Hrs, MTV w/Hopper Insert, THRU SHOP CURRENT UPDATES ADDED, #61981A, S/N JO798 ..........................................................................$239,878 GOMACO COMMANDER III - ‘12, 150 Hrs, 12’ Pan, Details on Request ........................$439,000 MAULDIN 1500 - ‘03, 844 Hrs, Track Conveyor Feed, 8’-13’ Screed, #61999A, S/N 1134 ............ ..........................................................................................................................................$27,950 MAULDIN 1750C - ‘13, 175 Hours, 8’-16’, #C000225 ....................................................$126,950 MIDLAND SPR6 - ‘13, 217 Hours, take a look at this its ready for work right hand discharge, #C000040, S/N 212 ........................................................................................................$105,095 MIDLAND SPD8 - ‘12, 298 Hrs, Ready to go, #61979A, S/N 466....................................$144,950 NEAL CART PATH PAVER - ‘08, 638 Hrs, 5’-8’ Screed Conveyor Feed, #61886A, S/N 03-0608 .... ..........................................................................................................................................$32,500 CALL items may be on rent causing pricing and hours to vary.

MILLING MACHINES

YOUR AUTHORIZED DEALER

in WISCONSIN and UPPER MICHIGAN for: GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS • LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLER CRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/ JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAG CRUSHERS • MANITOWOC CRANES

Large Selection of New & Used Equipment in Stock.

WIRTGEN W50DC - ‘13 • 20” Cut, Deep Cut Machine, 3 Wheel, Rear Discharge Mill, 236 Hrs $214,950

ROLLERS INGRAM 315 - 4 to Choose from, 3 Wheel Static Roller, s/n & Hrs Available ..............$26,500 Ea. SAKAI R2H-2 - ‘12, 388 Hrs, 3 Wheel Static, 83”, #61950A, 1R5-60251 ........................$83,795 SAKAI R2H-2 - ‘13, 90 Hrs, 3 Wheel Static, #C000223, 1R5-60309 ................................$89,795 SAKAI R2H-2 - ‘13, 30 Hrs, 3 Wheel Static, #C000252, 1R5-60313 ................................$93,412 SAKAI R2H-2 - ‘13, 291 Hrs, 3 Wheel Static, #C000312, 1R5-60312 ..............................$87,750 SAKAI SW850-2 - ‘11, 224 Hrs, 79” Double Drum Vibratory Roller, #61870A, S/N 50152 ............ ..........................................................................................................................................$92,578 SAKAI SW880 - ‘12, 295 Hrs, 79” Double Drum Vibratory Roller, #61938A, S/N 10142$117,980 SAKAI SW652 - ‘12, 218 Hrs, 57” Double Drum Vibratory Roller, #61937A, S/N 20167 ..$79,850 SAKAI SW300 - ‘13, 55 Hrs, 40” Double Drum Vibratory Roller, #C000211, S/N 40156 ..$33,950 SAKAI SW502 - ‘13, 233 Hours, 51 inch drum 9000 lb remaining std and or eptw warranty, #C000212..........................................................................................................................$41,974

AGGREGATE EQUIPMENT ALLIS 500-SD PORTABLE CONE CRUSHER, 300 HP electric motor, rear feed conveyor, side discharge conveyor, motor control panel, tri-axle, hydraulic leveling ................................................................................................$130,000 JCI/FABTEC 6’X20’ TD DUAL SCREEN PLANT, (2) 30” reversing conveyors under primary screen, 60” conveyor under secondary screen, (3) 42” cross conveyors (6) hydraulic leveling jacks, motor control panel ............$182,500 JCI K-300 “KODIAK” PORTABLE CONE PLANT, 300 hp electric motor, 36”x 20’ side discharge conveyor, 36”x 35’ feed conveyor, motor control panel, hydraulic leveling......................................................................................$375,000 POWERSCREEN 510 COMMANDER RINSER SCREEN PLANT, 11.8 Yd. hopper with hydraulic dump grizzly, 36” feed conveyor, 5x10 3-Deck screen, tandem axle, Deutz diesel ..................................................................................$52,400

EXCAVATORS DEMAG H95 MASS EXCAVATOR, Powered by a Cat 3408 Diesel, with a 24’7” Gooseneck Boom, and a 10’8” Stick with 43’6” Reach and 25’ Digging Depth, 7.2 cu yd HD Rock Bucket, Approx. 220,000 Lb. Working Weight, 5800 Frame Hours and Recent Engine Rebuild........................................................................................$95,000 LIEBHERR R974B HDSL UTILITY CRAWLER EXCAVATOR, Powered by a 471 HP Liebherr D9408TI Diesel, 33’11” Semi-Gooseneck Boom with 15’5” Stick, 5 cu yd HD Bkt, 21’x14’ 4” Wide U/C with 30” Track Pads adn Removable Sideframes, Approx. 190,000 Lb. Working Weight ....................................................................CALL

*Comes with any remaining standard and 3 year extended power train warranty.

EXCAVATORS GRADALL XL4100 - ‘94, 8368 Hrs, Working as is, #C000386, S/N 414218......................$19,500 GRADALL XL4100 - ‘98, 8884 Hrs, Workable, as is, #62013A, S/N 413282 ....................$25,000 GRADALL XL4100 - ‘02, 7745 Hrs, Good Machine, #C000402, S/N 411552 ....................$42,500 GRADALL XL4100 - ‘02, 7068 Hrs, Call on this One, S/N 415548 ....................................$53,950 LIEBHERR A904C - ‘11, 1435 Hrs, No Buckets w/Machine, Many Buckets in Stock for This ........ ........................................................................................................................................$156,950

Contact Marty in Illinois 1-800-307-0221

mahrendt@finkbinerequipment.com Photos & Detail Descriptions view: www.finkbinerequipment.com

GROVE RT760 ROUGH TERRAIN CRANE

GROVE TM9120 TRUCK CRANE

CRANES GROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom, 32’ to 56’ Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work ....................................$155,900 GROVE TM9120 100 TON TRUCK CRANE, 1997, 42’ to 130’ boom, 33’ to 58’ offsettable telescopic swingaway, Grove HO50 main & aux. hoists, LMI, Cummins 6CT8.3 diesel, mounted on a Grove 8 x 4 chassis with a Cummins N14 diesel and Roadranger transmissions. Tandem boom dolly ....................REDUCED TO $299,000 GROVE RT855B 55 TON ROUGH TERRAIN CRANE, 1995, with Cummins diesel, 37’ to 115’ boom, 35’ to 60’ swingaway, LMI, Grove model HO30 main & aux. hoists, 29.5x25 tires ..............................................$159,500 LIEBHERR HS883HD DUTY CYCLE HYDRAULIC CRAWLER CRANE, 132 Ton Class, (2 Available) with Liebherr V8 Diesels, Main Hoists with 44,000 SLP or 66,000 SLP, 115’ Main Boom, Removable Sideframes ..........CALL

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Lanny Peterson at:

lpeterson@amstate.com or mobile 1-715-574-8089 or 1-800-242-7113

Page 8 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Cloud Changes Field-to-Office Communication By Oscar R. Cantú SPECIAL TO CEG

Cloud computing is not quite as omnipresent as the computer in Star Trek, but…give it time. Cloud computing, or “the cloud,” is an interconnected group of powerful computers that collectively store data redundantly, host various services, and provide security. To the geospatial community, the cloud has already proven itself by acting as a password-protected hub that offers various services to companies of all sizes. In a few years, the cloud has improved communication

among all project team members and streamlined common workflows that are critical for the construction, surveying and mapping industries. But, How Did We Get Here? To give perspective on the benefits of the cloud, a quick review of the past 60 years of technological evolution can provide the backstory to how the cloud came to fruition and provide insights for what it can offer.

With the cloud, there is the easy access and secure exchange of information between the common organization triangle of manager, office and field staff for design changes and project updates.

The value of this cloud surfing connection becomes apparent when employees no longer need to waste time in traffic or wait to get back to the office to discuss what has been done on a project. Direct data sharing to any project site is now instant and easy.

Dial back to the 1960’s, which is when modern commercial computing was born. Giant mainframe computers filled an entire room or data center. There were no monitors, not even a computer mouse, and there definitely wasn’t “an app for that” back then. Data was stored and fed to the mainframe through magnetic tape drives and thick decks of punch cards that needed to be in precise order to work. In 1977, Apple introduced the Apple II home microcomputer, which started the migration of computers from the workplace into homes. In 1982, the Commodore 64, which took its name from its 64 kilobytes (65,536 bytes) of RAM, was introduced and became the highest-selling single computer model of all time. Independent estimates place the actual number of C64 computers sold were between 10 and 17 million units. At $595 each, the Commodore 64 not only ended up in more homes, it expanded the technological revolution because peripherals like printers and disk drives could be connected to them. Then technological advancements in the 1990’s began to permeate everyday life. From the comfort of their homes, people could effortlessly and instantly communicate with other computers in other homes through the Internet. This was a huge leap forward — smaller, better, faster computers — and most of them interconnected. Looking back, the decade of the 1990’s clearly brought the greatest and fastest advancement in technology in the history of

humankind. The first decade of the 2000’s rushed in even smaller and more powerful laptops, USB flash drives on key chains, hand-held music players, wireless Wi-Fi Internet connectivity and convenient smartphones. By this time, the global society became completely comfortable with technology. In fact, it has permeated both business and personal lives. In the current decade of the 2010’s, there is a slower yet more consistent stream of new products entering the marketplace. Sleek and powerful smartphones are used less for actual phone calls and more for quick text messaging, quality photo and video capturing and instant global sharing, as well as the ability to visually navigate step-by-step to favorite restaurants. Simply amazing. Six short decades brought about tremendous change, growth and evolution in how people live and work. Powerful and pocketsized technology now allows people to communicate seamlessly across the globe. Everyone — in one way or another — has access to the Internet. Sending an e-mail from Florida to Japan is not impressive any longer… in fact, it’s actually expected. Currently, it is easy to see how technology is fully integrated into people’s everyday lives. It is no longer looked at negatively to be sitting at a computer all day. Why? Because that is how lives are lived now, how productive and profitable work gets done, and how the world has changed. see CLOUD page 46

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees WHEEL LOADERS

Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25 rubber, 15K hours, work ready . . . . . . . . . . . .$42,500 Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . . . .$79,500 John Deere 624G, 1996, EROPS, quick coupler, GP bkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$46,000 Volvo L60E, 2005, EROPS, coupler, aux hyd, boom susp, 20.5R25, v. good . . . . . . . . . . . . . . . . . .$89,500 COMPACTORS

IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean $69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000 (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500 LANDSCAPING

Case/IH 485 Utility Tractor, 1986, Case 3 cyl dsl engine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd angle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500 CRAWLER LOADERS

Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt .$37,500 Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000

OFF ROAD HAULERS Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready . . . . . . . . . . . . . . . .$127,500 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites . . . . .$87,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 CRAWLER TRACTORS

Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6" TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000 (5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALL Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB coupler, plumbed, 8’6” width, nice, work ready . .CALL Volvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing very good condition . . . . . . . . . . . . . . . . . . .$159,000 TRUCKS & TRAILERS

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL AIR COMPRESSORS

IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL SPECIALS

(12) Allmand Light Plants, 2008-2010, diesel, s/a towtype, (4) MH lights, excellent . . . . . . . . .From $5,200

(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, BACKHOES winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea. Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000 Case 580L Rubber Tire Loader Backhoe, 1997, (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea. DRILLS John Henry Drill Mtd on Cat 320N, 1994, 24' mast, CRANES Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, Duraquip dust collection . . . . . . . . . . . . . . . .$150,000 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 MISCELLANEOUS Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom (2) Balderson Broom Attachment for Cat IT Machines, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. MOTOR SCRAPERS

ATTACHMENTS Cat 613C Water Wagon, 1994, 5000 gal drop tank, BUCKETS ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 PC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good Over 100 Excavator, Loader, Specialized & Grapple condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Buckets in Stock Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice -Call For Your Needs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, HYDRAULIC EXCAVATORS excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick couOthers Available Call pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000 Prices Are Negotiable - At Your Inspection Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber, All Equipment is Owned & Operated By operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER ALEX E. PARIS CONTRACTING CO., INC.

Page 10 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

USED EQUIPMENT 2011 VOLVO A40F, 3755 Hrs ....................$351,100

2012 VOLVO A40F, 3015 Hrs ....................$388,300

2012 VOLVO A40F, 3147 Hrs ....................$388,300

A40 Finance leasing available for 24 months with payments as low as $7,900 per month. Call Doug Wilson for details.

Asphalt/Pavers/Concrete Equipment

Motor Graders

1987 BLAW-KNOX PF120H, 5952 Hrs ..........................................................$7,222 2007 INGERSOLL-RAND PF6110, 2809 Hrs ........................................$167,000 2004 VOLVO PF5510, 148 Hrs ........................................................................$25,000 2006 VOLVO PF6110, 2866 Hrs....................................................................$166,700 (2) 2007 VOLVO PF6110, 2809-2994 Hrs ......................................$166,700 Ea. (2) 2008 VOLVO PF6110, 3258 Hrs ......................................$166,700-$167,000 2011 VOLVO PF6110, 2288 Hrs....................................................................$206,000

2013 LEEBOY G700, 112 Hrs........................................................................$158,500 2002 VOLVO G720 VHP, 2195 Hrs ................................................................$72,225 2011 VOLVO G946, 1725 Hrs ........................................................................$211,200 2011 VOLVO G946B, 1959 Hrs ....................................................................$211,200

Compactors-Smooth Drum 2007 VOLVO DD90HF, 1753 Hrs ....................................................................$58,500 2008 VOLVO DD118HF, 2030 Hrs..................................................................$83,500 2010 VOLVO DD112HF, 1771 Hrs..................................................................$88,900 2012 VOLVO SD116DX, 1489 Hrs ..............................................................$116,700

Your VOLVO dealer in: North Dakota Bismarck Fargo Minot

North Carolina Charlotte Raleigh Asheville Greenville

South Carolina Columbia North Charleston Piedmont

Georgia Buford Forest Park Savannah

Excavators-Crawler 2006 HITACHI ZX240 LC-3, 8410 Hrs ........................................................$67,000 2013 KOMATSU PC350 LC-8, 2408 Hrs ..................................................$222,300 2013 KOMATSU PC360 LC-10, 739 Hrs ..................................................$278,000 2008 VOLVO EC210C LC, 2764 Hrs ..........................................................$122,500 2011 VOLVO EC210CL, 3503 Hrs................................................................$138,900 2013 VOLVO EC220D, 2344 Hrs ..................................................................$144,500 (2) 2013 VOLVO EC220DL, 1721-2315 Hrs......................$139,000-$150,000 2008 VOLVO EC240C, 2268 Hrs ....................................................................$80,555 2011 VOLVO EC240CL, 2796 Hrs................................................................$150,000 2012 VOLVO EC250D LR, 1341 Hrs ..........................................................$189,000 2011 VOLVO EC250DL, 2778 Hrs................................................................$161,250 2004 VOLVO EC290B LC, 9540 Hrs ..............................................................$52,777 2004 VOLVO EC330B, 5800 Hrs ....................................................................$52,777 (2) 2011 VOLVO EC340DL, 3291-4099 Hrs......................$177,800-$184,000 (5) 2012 VOLVO EC340DL, 2601-3590 Hrs......................$181,000-$211,200 (2) 2013 VOLVO EC340DL, 1234-2363 Hrs......................$211,250-$216,750 2013 VOLVO EC380DL, 2210 Hrs................................................................$222,000 2011 VOLVO EC460C LC, 5048 Hrs ..........................................................$250,000 2012 VOLVO EC480DL, 2554 Hrs................................................................$328,000 (2) 2013 VOLVO EC480DL, 2125-2351 Hrs......................$324,500-$330,000

Excavators-Mini (up to 12,000 lbs) 2004 VOLVO EC55, 6035 Hrs ..........................................................................$27,777 2008 VOLVO EC55B, 4263 Hrs........................................................................$40,555

Excavators-Wheel

East Tennessee

(2) 2011 VOLVO EW180C, 2576-2910 Hrs........................$161,200-$166,700 2012 VOLVO EW180D, 1785 Hrs..................................................................$194,500

Knoxville Chattanooga

Water Equipment - Truck 2006 VOLVO A30D, 6864 Hrs ........................................................................$255,750

Doug Wilson 704-562-2032 Email: doug.wilson@ascvolvo.com

Full inventory at: www.ascvolvo.com

Billy Brice 678-318-9500 Email: billy.brice@ascvolvo.com

Off-Highway Trucks 2007 CATERPILLAR 725, 9247 Hrs ............................................................$123,333 2007 CATERPILLAR 730, 11,025 Hrs ..........................................................$83,333 2004 VOLVO A25D, 6313 Hrs ........................................................................$206,000 (3) 2012 VOLVO A25F, 1497-2725 Hrs ..............................$283,500-$305,750 (2) 2013 VOLVO A25F, 1198-1603 Hrs ..............................$300,000-$305,000 2011 VOLVO A30E, 3120 Hrs ........................................................................$283,500 2011 VOLVO A30F, 3747 Hrs ........................................................................$372,500 (8) 2012 VOLVO A30F, 2341-3698 Hrs ..............................$300,000-$328,000 (3) 2013 VOLVO A30F, 1244-2406 Hrs ..............................$324,500-$330,000 (2) 2012 VOLVO A35F, 2036-2962 Hrs ..............................$388,300-$415,000 (10) 2011 VOLVO A40F, 2287-6609 Hrs ............................$322,300-$410,000 (20) 2012 VOLVO A40F, 1873-3931 Hrs ............................$367,000-$447,000 (2) 2013 VOLVO A40F, 3104-4021 Hrs ............................................$388,300 Ea. 2013 VOLVO A40F FS, 2087 Hrs..................................................................$494,750

Sweepers/Boom Equipment 2012 BLAW-KNOX CB90, 145 Hrs ................................................................$51,750 2012 BLAW-KNOX FB90, 242 Hrs ................................................................$58,500

Wheel Loaders 2010 VOLVO L110F, 5170 Hrs ......................................................................$155,600 2012 VOLVO L110G, 3266 Hrs......................................................................$200,000 (3) 2013 VOLVO L110G, 2128-2812 Hrs............................$228,000-$234,000 2009 VOLVO L120F, 6911 Hrs ......................................................................$155,600 2005 VOLVO L150E, 20,742 Hrs......................................................................$65,000 2009 VOLVO L150F, 6938 Hrs ......................................................................$183,400 (3) 2010 VOLVO L150F, 8942-11,467 Hrs..........................$133,400-$133,500 (3) 2012 VOLVO L150G, 2674-2765 Hrs............................$267,000-$305,750 2011 VOLVO L180G, 4286 Hrs......................................................................$278,000 2013 VOLVO L180G, 2879 Hrs......................................................................$334,000 2012 VOLVO L250G, 1752 Hrs......................................................................$399,000 2003 VOLVO L50D, 7867 Hrs............................................................................$44,444 2010 VOLVO L50F, 8049 Hrs ............................................................................$55,555 2005 VOLVO L60E, 17059 Hrs ........................................................................$33,333 2013 VOLVO L60G, 1383 Hrs ........................................................................$144,000 2012 VOLVO L70G, 3019 Hrs ........................................................................$144,500 (2) 2013 VOLVO L70G, 2690-2936 Hrs ............................................$147,000 Ea. 2005 VOLVO L90E, 6796 Hrs ........................................................................$100,000 (3) 2012 VOLVO L90G, 2073-2618 Hrs ..............................$183,333-$194,500 (6) 2013 VOLVO L90G, 1273-4259 Hrs ..............................$156,000-$189,000

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 11

NORTH DAKOTA Bismarck 701-250-4882 Fargo 701-271-2360 Minot 701-839-4020

GEORGIA Buford 678-318-9500 Forest Park 770-319-0074 Savannah 912-964-8079

NORTH CAROLINA Asheville 828-687-0620 Charlotte 704-596-8283 Greenville 252-754-5280 Raleigh 919-661-8710

SOUTH CAROLINA Charleston 843-414-1120 Columbia 803-791-0740 Piedmont 864-704-1060

TENNESSEE Chattanooga 423-308-7940 Knoxville 865-525-1845

ascvolvo.com Join our team today. Call 701.250.4882

You carry the load. Every day. Everywhere.

Smart works. Volv V olvo is with you. That means a product you can depend on. A dealer you y can rely on. A commitment to helping you do what you do - better. Smart W Works orks – every day. W We e do it through innovation and technology. W We e do it in partnership with you so that the people that depend on you keep working and progressing. Contact your local V Volv olvo dealer today forr dependable Volv Volvo Articulated Haulers.

Page 12 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Roadbuilders Hosts Hydraulic Quick Coupler Safety Class

Through December 2014, every customer that orders a pink PHIL Autogate tailgate will have the option to take part in the Pink Tailgate Initiative, and PHIL will donate five percent of proceeds to the Susan G. Komen Memorial.

PHIL Initiative to Raise Funds, Cancer Awareness Philippi-Hagenbuch Inc. (PHIL) is working with the Susan G. Komen Memorial to increase breast cancer awareness and prevention and raise funds for research dedicated to finding a cure. Through December 2014, every customer that orders a pink PHIL Autogate tailgate will have the option to take part in the Pink Tailgate Initiative, and PHIL will donate 5 percent of proceeds to the Susan G. Komen Memorial. Each tailgate will be pink and adorned with a ribbon on the back. Charitable giving and community involvement are core values of the familyowned company. PHIL team members participate on a variety of boards and the majority of the Hagenbuch family either is currently or has been involved in medical-based philanthropies. Pat Hagenbuch is a member of the board of directors of the Hult Center for Healthy Living, a community health organization that focuses on cancer programs, and Danette (Hagenbuch) Swank (the third generation to lead PHIL) serves on the Foundation Council of the OSF Saint Francis Foundation, which provides advisory leadership for philanthropic efforts such as cancer prevention, research and awareness. Last summer, when Swank was named president, it was important to her that the values PHIL was founded upon by her father, LeRoy Hagenbuch, and grandfather, L.B.

Philippi, would continue to be cornerstones of the business. Swank is in a unique position as female leader of a manufacturing business dedicated to equipment for quarries, mines, and other heavy-duty off-highway truck environments. She has an opportunity to impact a cause that is important to her — the fight for a cure for breast cancer. Swank has already taken part in multiple Susan G. Komen Race for the Cure events and Avon’s 3-Day, 40-mi. walk. These experiences inspired her to create the Pink Tailgate Initiative. Peoria, Ill., PHIL’s headquarters, also is the hometown of Susan G. Komen. The global breast cancer movement started with a promise by Suzy’s sister, Nancy Brinker, to do everything in her power to end breast cancer. Through a series of Race for the Cure events dedicated to raising funds and awareness, Susan G. Komen has become the global leader in the fight against breast cancer, having raised more than $2.2 billion for research and life-saving community health programs. For more information regarding PHIL’s Pink Tailgate Initiative, call 800/447-6464 or visit http://www. philsystems.com/PHILanthropy.

The event was sponsored by RoadBuilders and JRB/Paladin Attachments to promote the importance of jobsite safety and proper use of attachments.

Roadbuilders Machinery and Supply hosted a hydraulic quick coupler safety class at its Grand Island, Neb., store on Sept. 4. More than 35 people attended and numerous local contractors were represented. The event was sponsored by RoadBuilders and More Than 35 people attended and numerous JRB/Paladin Attachments to pro- local contrators were represented. mote the importance of jobsite safety and proper use of attachments. attendance for the QC safety class, and I “We find proper equipment usage and guarantee everyone learned a little somejobsite safety to be a top priority in this thing new,” said Tony Randone, district sales industry. It’s great to partner with our ven- manager. dors and manufacturers for events like this to (This story also can be found on maintain awareness about safety. We had Construction Equipment Guide’s Web site at over 35 customers, operators and foremen in www.constructionequipmentguide.com.) CEG

Illinois to Spend Another $102M on High-Speed Rail

CHICAGO (AP) The state of Illinois will spent $102 million to build a bridge over the Kankakee River along with other improvements as part of high-speed rail upgrades between Chicago and St. Louis. Gov. Pat Quinn announced the funding on Aug. 31. The bridge will be built near Wilmington. The money also will pay for other safety and capacity efforts between (This story also can be found on Joliet and Dwight and a second set of tracks Construction Equipment Guide’s Web site at between Mazonia and Elwood. www.constructionequipmentguide.com.) The Illinois Department of Transportation

will oversee the work done by Union Pacific Railroad. The construction will take place in 2016 and 2017. The governor’s office said the project will create more than 900 construction jobs. Including the $102 million the state of Illinois will have spent nearly $360 million on the Chicago to St. Louis rail route. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 13

Fiat HD21, Side Boom, JD 850K, 24" Pads, 128" Blade, 1494 hours, Excellent Condition, #U11857 ........$268,000 3 Available $83,500 Ea.

JD 310SJ, Cab, Air, JD 400D, New KLEIN JD 700K, LGP, 30” 8000 gallon water truck, 4x4, Ext Hoe, #U11935 Pads,132” PAT Blade, 6457 hrs, #U11425........ ........................$69,500 Warranty, #U12196 ...... ......................$258,000 ......................$163,000

Case STX550 Scraper JD 350DLC, 13’1" Arm, Tractor, #U12066.......... 32" Pads, #U11703 ...... ......................$254,000 ......................$179,000

Low Hour JD 844K’s Available, 0% for 36 Months on Select Units

JD 350GLC Material JD 850K LGP, 36" Handler, #N5539 .......... Pads, 168" PAT Blade, ......................$495,000 460 hours, #U11976...... ......................$345,000

NPK Hammers, All JD 2112C Scraper Pan, JD 600CLC w/ Genesis Sizes for All Makes. #U12244 ..........$79,000 GXP1200R Shear, Inspected and Well #U10798 ........$468,000 Maintained, GH4-GH18

Bomag BW213PDH, JD 210CW, 2 Piece 84” Padfoot, Blade, Boom, Aux Hyd, #U11363 ..........$59,000 #U11722 ........$148,000

Page 14 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 15

(262) 781-3770 Jim King Mobile: (414) 530-0592 13001 W. Silver Spring Drive Butler, WI 53007

SEE PHOTOS

OF OUR

Fax: (262) 781-5053 Email: jking@aring.com

COMPLETE INVENTORY

AT WWW.ARINGEQUIPMENT.COM

2009 Volvo L60F, Cab, A/C, Radio w/CD, Heated Suspension Seat, Work Lights, 3rd & 4th Functions, Boom Suspension, Hyd. Attachment Bracket, Reversible Cooling Fan, Engine Block Heater, Dymax 4cy High Tip Bucket w/BOE, 20.5R25 Tires – Front 0% (Solid) / Rear 10% (Air Filled w/Sealant) ....$65,000

2011 Volvo DD138HF - Back up alarm, infrared temp sensor, work lights, 328 gal water tank cap, operating weight 30,325 lbs, vibrating frequency: 3200 vpm, vibration centrifugal force: 21,840-42,260 lbs, 84" drum width ................................CALL

2011 Volvo L45F, Cab, A/C, Radio w/CD, Air Suspension Seat, Single Lever Control, Sliding Window Operator’s Door, Front/ Rear Work Lights, 3rd Function, Torque Parallel Linkage, Hyd. Attachment Bracket, Reversible Cooling Fan, Reverse Alarm, 88” 1.8cy Bucket w/BOE, 15.5R25 Michelin Tires ......$99,500

2012 Volvo ECR58, 16” Rubber Tracks, Auto Idling, Heat/AC, Pilot Controls, Counterweight ......................................$65,000

2012 Volvo L150G, 26.R25 L3 VJT Bridgestone Tires, Volvo D13H-E Engine, Radiator, Reversible Cooling Fan, Rear View Camera, Engine Block Heater, Boom Suspension, Rehandling Counterweight, 126” 5.5cy GP STE Bucket w/BOE ..$265,000

2013 Volvo L90G, Camera w/Color LCD Monitor, Sliding Window Operator's Door, Halogen Work Lights Front/Rear, Boom Suspension, Hydraulic Attachment Bracket, Reversible Cooling Fan, Reverse Alarm, Rotating Warning Beacon, Rear Frame Cover Plates, Front Frame Footsteps, Full Rear Fenders, CareTrack System, 104" 3.5cy Bucket w/BOE, 20.5R25 MI XHA2 L-3 Tires, Volvo D6H (Tier 4i) Engine..............$182,500

2013 Volvo BL70B, Municipal trade, 92.5" loader bucket, mech. att. bracket, 1.3 CY GP bucket w/ spill guard, EXT dipper arm, pilot controls,4WD, A/C, radio w/CD, MP3 connection, double battery, boom suspension, additional 1080lb counterweight ..........................................................................$89,500

2012 Dressta TD25M, 26" Severe Service Pads, 90% UC, Hydraulic Controls (3 Spool Valve / 2 Lever), Severe Service Crankcase & Transmission Guards, Final Drive Rock Guard, Full Length Track Roller Guard, Engine Block Heater, Start/Charging Receptacle Plug Assembly w/15' Cable, SemiU Blade (12.5cy) w/Reinforced Center Push Plate & Hydraulic Tllt, Fixed Drawbar ....................................................$270,000

2008 Volvo A40E - A/C, Radio w/CD, Air Suspension Seat w/Armrest, Front Work Lights, Elec Hood Opener, Delayed Engine Shutdown, 29.5R25 Tires ..............................$288,000

2011 Volvo L220G, A/C, Radio w/CD, Heated Air Susp Seat, Rear Camera, Electro-Hydraulic Servo Controls, OptiShift, Comfort Drive Control, Boom Suspension, Work Lights, Reversible Cooling Fan, Axle Oil Cooling, Engine Block Heater, Full Rear Fenders, Re-Handling Counterweight, CareTrack Hardware, 134” 8.2cy STE Bkt w/BOE, 29.5R25 Michelin L-4 Tires, Volvo D13H-F (Tier 4i) ..........................................CALL

2011 Volvo SD116DX, Work lights, flow divider, bolt on pad foot shell, inside scrapper, universal scrapper, grill support installation, operating weight 23,930 lbs, vib frequency 1,870-2,018 vpm, vibration centrifugal force: 47,900-61,000 lbs, 84" drum width ..........................................................................$117,000

2012 Volvo BL70B, Municipal Trade, 92.5” Loader Bkt, Mech. Att. Bracket, 1.3 CY GP Bkt w/Spill Guard, EXT Dipper Arm, Pilot Controls, 4WD, A/C, Radio w/CD, MP3 Connection, Double Battery, Boom Suspension, Additional 1080lb Counterweight .. ......................................................................................$83,500

2012 Volvo L70G, MUNICIPAL TRADE, A/C, Radio w/CD, Heated Air Susp Operator's Seat, Rear Camera, Boom Suspension, Hydraulic 4 Functions, , Reversible Cooling Fan, CareTrack Satellite System w/3yr Subscription, 100" 3.1cy Bucket w/BOE, 20.5R25 BR VJT L3 tires, Volvo D6H (Tier 4i) Engine ........................................................................$165,000

2013 Volvo EC250DL, Municipal trade, 19'9" boom, 11'10" arm, 36" track pads, engine block heater, air susp seat w/heat, joystick 3 switch & 1 prop, climate control with a/c, radio w/cd, rear view camera, 2 pump double act. piping, quick fit piping, pilot pattern controls, straight travel pedal, caretrack ........$217,500

2011 Volvo DD70HF, Backup Alarm, Operating Weight 14,895 Lbs, 205 Gallon Water Tank Capacity, Vibration Frequency: 4000 VPM, Vibration Centrifugal Force: 7,820-21,080 Lbs, 57” Drum Width ....................................................................CALL

2002 Hitachi ZX330 LC, A/C, Radio, Lubecore Auto Grease System, 36" Pads, 39'8" Boom, 30'9" Stick, 60" Ditching Bucket ..........................................................................$92,500

WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL BREK ZORTMAN (414) 750-3351 FOR MORE INFO.

Page 16 â&#x20AC;˘ September 13, 2014 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

0% for 48 Months* Expires 10/31/14

YOU WONâ&#x20AC;&#x2122;T BELIEVE ALL THE BRIGHT IDEAS WE PICKED UP ON THE WAY HERE. Introducing the new E-Series Skid Steers and Compact Track Loaders. When we asked RSHUDWRUV OLNH \RX WR GHVLJQ WKHP WKHUH ZDV QR VKRUWDJH RI EULJKW LGHDV /LNH D Ć DW Ć RRU with 25-percent more foot room. Up to 10-percent more horsepower. Switchable controls for large-frame models that let operators choose between ISO, H-pattern, and foot controls. And easier attachment hookup. You challenged us to make them great, and we didnâ&#x20AC;&#x2122;t disappoint. To see more bright ideas, visit your dealer or our website.

YOUâ&#x20AC;&#x2122;RE ON.

www.JohnDeere.com/Eskid

RDO Equipment Co.

*Offer valid through October 31, 2014. Subject to approved installment credit through John Deere Financial. Offer includes new John Deere Skid Steers, Compact Track Loaders and Compact Excavators. 0% APR for 42 months is available on new John Deere Compact Wheel Loaders. Some restrictions apply. Other offers available. See dealer for details.

Ryan Miller Burnsville, MN 952-890-8602

Isanti County Equipment Isanti, MN Jesse Kraft 763-444-8873 www.mnequipmentsolutions.com

Chris Conrad Rochester 507-282-8888 www.rdoequipment.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 17

WE STAND READY. 2005 CAT D8T, Stk# 541, 9302 hrs, e/rops, a/c, heat, u/c 50% ............................$245,000 PHONE

KENNY ACTON

(812) 282-2800

(502) 639-4168

(812) 282-2882 FAX

We are decision makers. We are problem solvers. We are your Nortrax Parts Specialists. We have only one goal — to keep you up and running and profitable. At Nortrax, we have an or extensive line of quality new and remanufactured parts ffor all makes when you need them. We have the people to help you succeed. We stand ready.

6104 Sable Mill Court, Jeffersonville, IN 47130

EQUIPMENT SPECIALS 2006 CAT 330DL, 7056 hrs, a/c, u/c 65%, New Hyd Pump..........................................$119,000

2005 KOMATSU PC400 LC-7, Stk #518, 7211 hrs, a/c, heat, plumbed ............$145,000

2006 Komatsu PC300LC-7, 5973 hrs, a/c, heat, e/rops, u/c 40%, Stk #428 ............................................................$119,000 2005 Komatsu PC400LC-7, 8145 hrs, a/c, heat, aux hyd, u/c 80%, Stk#357 ............................................................$112,000 2009 Liugong CLG922, 2731 hrs, heat, a/c, u/c 60%, thumb, Stk #568 ......................................................................$69,000 2009 Liugong CLG936, 1830 hrs, A/C, heat, plumbed, u/c 80%, Stk #660 ............................................................$127,000 2006 Cat D8T, 9820 hrs, heat a/c, e/rops, u/c 90%, Stk#647 .. ....................................................................................$269,000 2005 Rosco RB48, 1946 hrs, e/rops, Stk #675............$20,000 2008 Liugong 842llTC, 2312 hrs, a/c, heat, 80% rubber, 2 avail........................................................................$70,000 EA. 2005 Terex TA27-G7, 6695 hrs, e/rops, heat, a/c, 6x6 truck, 2 avail........................................................................$69,000 EA. 2005 Deere 300D, a/c, heat, 6596 hrs, tailgate, rubber 65%, Stk#418 ......................................................................$119,000 2010 LaBounty 2000R, 500 hrs, 3rd member hydraulic processing shear................................................................$79,000

Ashland, WI 715.682.5522

Mosinee, WI 715.693.3820

Grand Rapids, MN 218.326.9427

Richmond, KY 859.623.2030

Chippewa Falls, WI 715.834.2924

Duluth, MN 218.722.7456

Escanaba, MI 906.789.9054

Bowling Green, KY 270.842.3400

Monico, WI 715.487.5583

Bemidji, MN 218.759.1996

Louisville, KY 502.253.3721

London, KY 606.862.8447

facebook.com/NortraxInc

2007 DEERE 400D, Stk #646, 7655 Hrs, 6WD, A/C, Tailgate ............................$165,000

Ask about our GPS Machine Control Equipped Dozers, Graders & Excavators www.JobRentals.com

Page 18 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Louisville Contractor Experiences Zero Downtime With Gorilla Hammer

GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN. Every Komatsu Tier 4 construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filter exchanges. With Komatsu CARE you can:

• Lower your cost of ownership M • Increase equipment uptime and reliability • Protect the value of your Tier 4 capital investment It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers. To learn more about Komatsu CARE contact your Komatsu distributor or scan this QR code with your smart phone.

MIDWEST KOMATSU DISTRIBUTORS

Berry Tractor & Equipment

(L-R): Louisville Paving Company’s Equipment Manager Tim Peters, Bale Equipment Solutions’s Rick Nation, Louisville Paving Company President Joseph Dougherty, and Gorilla Hammers’s Bob Tedesco.

Louisville Paving and Construction Company purchased the first three Case backhoe loaders sold by Bale Equipment Solutions when the dealership first took on the Case line in 2011, according to Tim Peters, equipment manager. Peters’s history with various Bale Equipment Solutions personnel, however, extends back even further. Peters got to know several of Bale Equipment Solutions’s employees over a 20-year period while employed by Louisville’s previous Case dealer. For nine years Peters worked at the dealership as a mechanic for seven years and then as the rental manager for the balance of his tenure with the Case dealer. During his time there, Peters gained a lot of respect for Case machines. The knowledge he accumulated was put to good use when he joined Louisville Paving and Construction Company as equipment manager nine years ago. Peters employs a studied approach toward analyzing equipment used by the company, considering a piece of equipment’s cost and determining value by monitoring productivity, maintenance issues, and longevity. When the company was awarded a pipeline contract a few years ago Peters felt it was time to purchase a new hammer. Over the years the company had owned hammers from several manufacturers and Peters wanted to shop around to see what other hammer suppliers had to offer. Through his dealings with Bale Equipment Solutions, Peters learned that the dealership had taken on the Gorilla hammer line. After speaking with Gorilla Hammers President of Sales and Marketing Bob Tedesco he decided to give the hammer a try, and was not disappointed. Contractors in the Louisville area are familiar with encountering limestone on just about every project that requires digging or moving dirt. When the limestone is blue you’re into extremely hard rock, according to Peters, yet the Gorilla Hammer is always up to the task. Peters said that from an owner/operator standpoint, the Gorilla hammer has been an excellent investment. He has experienced very little downtime with hammer issues and the only money the company’s had to put into the hammer is for normal wear and tear replacement parts. Peters added that 68 percent of the time their machines are

running they have a hammer on them. Their Gorilla Hammer logs an average of 4,400 to 6,500 hours per year actively breaking rock with no downtime. They often use the Gorilla hammer to break boulders, sometimes 6 ft. (1.8 m) in diameter without issues. He added that Tedesco stops in frequently. As part of Gorilla’s innovative “hands-on” dealer program, Tedesco spends time addressing technicians’ concerns and questions regarding both Gorilla’s and other competitor’s hammers. “Gorilla’s product, backed by Bale Equipment, has been a winning combination for our company,” said Peters About Louisville Paving and Construction Company Louisville Paving and Construction Company began more than 60 years ago as a local driveway paving company in Louisville and has grown into a key highway contractor, working on projects from its home base in Louisville to Lexington and into southern Indiana. Louisville Paving and Construction Company is a family owned business with roots that go back nearly 100 years when the Dougherty Coal Company was formed by Joseph Michael Dougherty in 1919. As the company grew, it branched into paving operations, forming Louisville Paving Company in 1949. The company is a full service contractor involved in both highway and heavy construction and maintains a fleet of paving and site equipment. It employs the latest technologies for design, layout and GPS machine control for maximum efficiency, outstanding work quality and jobsite safety. The company is now managed by fourth-generation family members, John and Joe Dougherty. Along with Louisville Paving and Construction, the company also owns and manages two subsidiary divisions; Pace Contracting, performing heavy construction services involving water and sewage treatment plant construction and pump stations and structures. Material Transfer Company operates a fleet of dump and speciality trucks to service its other divisions. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

www.berrytractor.com KS Garden City 620-277-2290 • 877-469-1763 Topeka 785-266-9509 • 877-469-1763 Wichita 316-943-4246 • 877-469-1763 MO Springfield 417-831-2651 • 877-469-1763

8 I

Brandeis Machinery & Supply Company www.brandeismachinery.com IN Evansville 812-425-4491 Ft. Wayne 260-489-4551 Indianapolis 317-872-8410 KY Corbin 606-528-3700 Lexington 859-259-3456 Louisville 502-491-4000 Paducah 270-444-8390 Stanville 606-478-9201

B 8

A 8 F

Columbus Equipment www.columbusequipment.com OH Cadiz 740-942-8871 Canton 330-453-4521 Cincinnati 513-771-3922 Columbus 614-443-6541 Dayton 937-879-3154 Painesville 440-352-0452 Perrysburg 419-872-7101 Piketon 740-289-3757 Richfield 330-659-6681 Zanesville 740-455-4036

Continental Equipment Corp. www.ceceq.com MI Grand Rapids 616-538-2400 Lansing 517-321-8000 New Hudson 248-437-8121 Northeast Detroit - Lenox 586-727-7502 Saginaw - Bridgeport 989-777-0090 Traverse City - Williamsburg 231-267-5060

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 19

Diesel Machinery, Inc. www.dieselmachinery.com SD Aberdeen 605-725-4364 • 888-762-6312 Rapid City 605-348-7438 • 800-658-3047 Sioux Falls 605-336-0411 • 800-456-4005

General Equipment & Supplies www.genequip.com ND Bismarck 701-223-9700 • 800-279-4437 Fargo 701-282-2662 • 800-437-2924 Minot 701-852-0479 • 800-825-0479 Williston 701-572-0570

DASH 10 EXCAVATORS From Komatsu - The Excavator Experts

Road Builders Machinery & Supply Co., Inc. www.roadbuildersmachinery.com KS Kansas City 913-371-3822 NE Grand Island 308-384-2620 Lincoln 402-325-0447 Omaha 402-331-9200

Road Machinery & Supplies Co. www.rmsequipment.com IA Cedar Rapids 319-363-9655 • 800-616-6615 Des Moines 515-282-0404 • 800-555-1445 Sioux City 712-252-0538 • 800-633-9104 IL Milan 309-787-1742 • 800-633-9114 MN Duluth 218-727-8611 Savage 952-895-9595 • 800-888-9515 Virginia 218-741-9011 • 800-752-4304

Roland Machinery Co. www.rolandmachinery.com IL Bolingbrook 630-739-7474 Carterville 618-985-3399 Marengo 815-923-4966 Springfield 217-789-7711 IN Portage 219-764-8080 MI Escanaba 906-786-6920 MO Bridgeton 314-291-1330 Cape Girardeau 573-334-5252 Columbia 573-814-0083 Palmyra 573-769-2056 WI DeForest 608-842-4151 DePere 920-532-0165 Eau Claire 715-874-5400 Franksville 262-835-2710 Schofield 715-355-9898 www.komatsuamerica.com/komatsu-care

Komatsu Dash 10 excavators provide increased horsepower, improved operator comfort and reduced fuel consumption. The excavator experts at Komatsu can help you complete jobs more quickly, while lowering your fuel and maintenance costs. t Efficient Komatsu Tier 4 Interim engines and advanced hydraulic system maximize productivity while providing up to 10% lower fuel consumption t Enhanced operator environment improves comfort and machine control t Komatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.

www.komatsuamerica.com www .komatsuamerica.com

Page 20 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

A Bobcat compact excavator and skid steer loader greet visitors at the new Acceleration Center in Bismarck, N.D.

Bobcat, Doosan Open Doors of New Acceleration Center

Dignitaries get a tour of the new arena viewing area during a VIP tour at the Acceleration Center.

Bobcat Company and Doosan recently opened the doors to their new Acceleration Center, ushering in a generation of advanced product innovation and accelerated learning to benefit customers, dealers and employees worldwide. The facility — located within Bismarck, N.D.’s Northern Plains Commerce Centre — will be home to 175 individuals tasked with initial design, prototype engineering, prototype manufacturing, computer simulation and testing of ideas and concepts. The Acceleration Center becomes a key engineering facility for all Bobcat compact equipment distributed globally, and it will help serve some of Doosan heavy equipment’s research and development needs for the North American market. The $28 million project involved expansion of an existing building to include office and lab space, classrooms and demonstration areas, and both indoor and outdoor machine operation areas. The facility has two stories and 190,000 sq.

Bobcat Company and Doosan North America President Rich Goldsbury, members of the Bismarck-Mandan Chamber of Commerce and dignitaries make the grand opening official with the ribbon cutting.

ft. under roof, with an additional 22 acres of outside test and product development space. A collaborative open office environment is equipped with modern devices, tools and software systems that expedite leading-edge engineering, and product and process development. A dedication ceremony and open house on Aug. 5 featured remarks from Rich Goldsbury, president of Bobcat Company and Doosan, North America; North Dakota Gov. Jack Dalrymple; U.S. Sen. John Hoeven; U.S. Rep. Kevin Cramer and Bismarck Mayor Mike Seminary. The Acceleration Center’s grand opening came just a month after Bobcat Company celebrated its millionth-loader milestone — a celebration that was themed “Unstoppable.”

Bobcat reached 500,000 loaders in 2001 and 750,000 in 2008; now one million Bobcat loaders just six years later. “We have momentum,” Goldsbury said. “We are investing in our innovations and technologies, and in our facilities and our people. That’s what this particular facility is all about: momentum and acceleration. Bobcat will continue to be an unstoppable force in the industry, and Doosan will continue to grow into a premier heavy equipment brand in the North American market.” The company broke ground on the Acceleration Center project in May 2013. The entire project — including the original building built in 2005 — capped a total $43 million see ACCELERATION page 40

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 21

SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

Page 22 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Using Mobile Technology Increases Productivity on Jobs

Shown here is a fleet manager driver center duty graph

Asset Management Shown here is an AT&T moble forms Web portal form builder.

Field workers in construction are using mobile technology — apps, devices, services — to increase their productivity and decrease project costs. Construction was among the first industries to use cell phones and push-to-talk (PTT) to improve communication among project teams on the job site, and many construction companies are now using mobile to accomplish basic business tasks with greater efficiency and lower cost. For example, you can: • eliminate entire days from the field reporting cycle by using electronic mobile forms on a smartphone or tablet; • let your field employees use mobile devices to complete their timesheets; • enable your supervisors to manage crew time and easily submit data into the payroll system; • gather and manage data on your construction equipment and asset fleets, from simple location to performance metrics like hours of service, fuel use, and maintenance alerts; • give your field workers tools for entering project information on mobile devices that goes straight into your back-office systems; and • instantly communicate with up to 250 people at a job site using Enhanced PTT. New areas of mobile automation are becoming more popular in construction. Imagine your field workers picking up their assignments each day on their phones instead of having

AT&T Fleet Manager provides the kind of real-time and historical GPS-based information companies can use to manage their assets, including alerts from geofence crossings and after-hours usage.

to drive in to the office. They report task completion through their mobile device so you can reassign them as soon as they’re available. They order special equipment through their smartphone, and you find and dispatch assets geographically close to them. They set up impromptu conference calls over PTT and update entire teams in real time. Best of all, your entire company reduces its dependency on paper and the costs associated with handling it. That can lead to a quicker, less costly exchange of information that streamlines the process of making decisions. Mobile technologies are more than just cool apps — they’re your next competitive advantage. Three new categories of mobile tools allow you to manage your construction project resources more effectively. Asset Management — Moving the Back Office Into the Field Construction companies spend a lot of time tracking the location and status of equipment, monitoring driver behavior, dealing with compliance, maintaining service logs and performing many other activities just to manage their assets. The right mobile solution can save you time and allow you to manage your equipment or asset fleet more effectively. Using asset management systems combined with GPS, companies can cut costs by locating their equipment when they need it, capturing performance metrics like hours of

service and offering greater control over variable costs like fuel. With the data these systems capture, companies can improve their equipment maintenance program to reduce the chance of equipment failure and minimize downtime. You can use mobile devices to view and analyze asset data: inventory regardless of location, real-time reporting see TECH page 30

Workforce Management Telenav Track from AT&T combines the latest advances in GPS, wireless and Web technologies to make mobile workforce and asset management an affordable reality for businesses of all sizes. AT&T Mobile Forms is a business workflow and electronic forms solution. It enables rapid, media-rich data dispatch to and collection from the field with AT&T-powered mobile devices. All your data is connected to your back office or to cloud services including Box, Dropbox and Microsoft SharePoint. Xora StreetSmart Workforce from AT&T lets your mobile employees streamline communication and data collection with operations or dispatch managers, and submit location-aware timesheet information for payroll and job costing.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 23

www.liugongna.com T O U G H W O R L D . T O U G H E Q U I P M E N T. We make one of the broadest lines of construction, mining, road building and material handling equipment in the world. All

EVERY JOB. EVERYWHERE.

backed by top-notch warranty, training, parts and service support. Contact your local dealer today for more information...

MidWest Ready Mix & Equipment 1405 East Highway 50 • Vermillion, SD 57069 605-638-0897 www.buyaloader.com

Page 24 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

JCB Tackles ALS Ice Bucket Challenge in a Big Way Just about everyone knows someone who’s recently taken part in the “Ice Bucket Challenge” to raise money for Amyotrophic Lateral Sclerosis (ALS) research. However, those previous efforts may pale in comparison to the frigid drenching that many JCB employees experienced on Aug. 22. That day, JCB offered its Savannah-area employees the chance to demonstrate their support for ALS research. Those who donated to the cause received the cold shower of a lifetime when multiple JCB backhoes doused them with enormous buckets full of icy water. The chilling event was familyowned JCB’s way of supporting Dallas Reeves, JCB’s vice president of sales, whose family has been personally affected by the devastating disease. “My grandfather passed away from ALS,” said Dallas Reeves, JCB’s vice president of sales. “As a result, my family and I have witnessed the painful realities of this disease first-hand. I truly appreciate JCB for taking on this cause and supporting ALS sufferers and their families in the search for a cure.” Commonly known as “Lou Gehrig's Disease,” ALS is a progressive neurodegenerative disease that affects nerve cells in the spinal cord and brain. Motor neurons in

JCB employees took the ALS Ice Bucket Challenge on Aug. 22.

affected individuals continue to degenerate and die, causing the brain to lose its ability to initiate and control muscle movement. Patients in the disease’s latter stages may suffer from complete paralysis. “Over the past few weeks, the ALS Ice

Bucket Challenge has proved itself to be a fun and memorable way to raise money for a very good cause,” said Thom Peebles, JCB’s vice president of marketing. “I’m very proud that the JCB family is supporting Dallas and his family by

helping fund much-needed research to fight a disease that’s taken so much away from so many.” (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

KCMAAnnounces ’13 Salesman of the Year Award Recipient

Adam Craft (L), KCMA regional sales manager-Texas, presents the award to Bill Lawson, Bane Machinery.

The winner of the 2013 Kawasaki Wheel Loaders Salesman of the Year is Bill Lawson, Bane Machinery. “Bill represents the characteristics Kawasaki looks for in awarding this honor,” said Gary Bell, vice president, general manager, KCMA Corporation, when the award was announced during the 2014 ISRI Regional Conference in San Antonio, Texas. “We don’t necessarily select the top-volume salesman, rather we select someone who exhibits professionalism, skill and attitude. He always represents himself, his distributorship, and his manufacturers in the most ethical manner. Bill is a great representative of Kawasaki, and we are proud to present him with this recognition.” Lawson has been with Bane Machinery for 15 years, but has been around equipment 42 years. He got into the industry during his college years by working part time at a rental company. Upon graduation, he took the full-time plunge into sales. “I tried that desk stuff and it’s not for me. I like the freedom of sales; I like to be out with people. It’s my deal,” said Lawson. So back into the field he went. By 1984 he had moved from selling smaller pieces of construction iron from companies that are no longer in business, to selling Kawasaki wheel loaders. He was a pioneer in that area. Almost four years later Kawasaki established its own U.S. factory in Newnan, Ga. “You know, I’ve been doing this for 42 years. And I know everybody in town. But 18 years ago, the hardest part of selling Kawasaki was getting people to try them. We demo’ed like crazy. Then we started selling. I’ve

never sold anybody their first Kawasaki where they didn’t come back and buy a second, third, fourth, or fifth. It’s a great product; they make it simple. I don’t remember the last time I had to demo a machine for a sale. The name has gotten around.” “Bane Machinery is very proud of the efforts of Bill Lawson,” said Fred Leach, general manager, Bane Machinery Inc., Dallas/Ft. Worth, Texas. “Bill’s focus on taking care of the customer has proven to be a great asset here. The Kawasaki loader continues to be a huge part of his success, and Bane is very proud to have both in our family.” “Bill’s dedication throughout his 15 years of sales for Bane Equipment continues to reap rewards, and is evident in his receiving the Kawasaki Salesman of the Year award,” said Scott Bane, president, Bane Machinery Inc. Forty-two years of sales hasn’t slowed Lawson down a bit; however he is ready to shift his focus. I’ve been selling to contractors as well as those in recycling and scrap. But I think I’m going to concentrate solely on the recycling end of the business. And I’m going to keep selling as long as I’m having fun, and my health holds up,” he said. KCMA Corporation, formerly Kawasaki Construction Machinery Corp. of America is headquartered in Kennesaw, Ga. The wheel loaders are assembled in its Newnan, Ga., facility. For more information, call 770/499-7000 or visit www.TryKawasakiLoaders.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 25

I-35 & Hwy 60W • Faribault, MN Give Paul, Herb or Blake a Call Today

507-334-2233

2013 Quadtrac 550 558 hours ..............$329,900

Ashland I-200..........$69,900

2013 Quadtrac 550 1200 hours ............$309,900

‘08 ‘08 ‘10 ‘08 ‘13 ‘13 ‘13 ‘14

2008 Quadtrac 535 2762 hours, big hyd pump.. ..............................$189,500

CIH Steiger 485 HD scraper, 3218 hrs................$149,900 CIH Steiger 485 HD scraper, 3756 hrs................$149,900 CIH Steiger 535 Quad, 4000 hrs ........................$165,000 CIH Steiger 535 Quad, 2762 hrs..........................$189,500 CIH Steiger 550 Quad, 900 hrs............................$315,000 CIH Steiger 550 Quad, 715 hrs............................$326,000 CIH Steiger 550 Quad, 547 hrs............................$329,900 (NEW) CIH Steiger 580 Quad, 1.5 hrs ................$415,000 All have: Scraper Version, leather cab, susp cab, big hyd pump, hid lights, Diff Lock Large Rental Inventory 550 Quadtracs & Scrapers

ASHLAND I-200 22946 2012 ........................................$69,900 ASHLAND I-200 22947 2012 ........................................$69,900 REYNOLDS 17E 34975 2006 ......................................$49,500 REYNOLDS 17E 35093 2006 ......................................$49,500 REYNOLDS 17E 35096 2006 ......................................$46,800

www.matejcek.com

Page 26 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

To See More Machines, Please visit us online at www.bobcat-ent.com Call Brad Kent at 513-266-7761 or on our USED EQUIPMENT HOTLINE: 888.BOBCATS

2011 3400 Bobcat Utility Vehicle, 250 Hrs, 4WD, Gas Engine, 2005 MT52 Bobcat Mini Loader, 745 Hrs, Ready to Work, 2009 S250 Bobcat Loader, 3920 Hrs, Open ROPS, CN 90127 CN 81483..........................................................................$10,000 CN 91668..........................................................................$11,000 ..........................................................................................$25,000

2010 S250 Bobcat Loader, 1825 Hrs, Open ROPS, CN 90133 ..........................................................................................$28,500

2010 S205 Bobcat Loader, 1700 Hrs, Open ROPS, 2 Speed, 2012 S630 Bobcat Loader, 700 Hrs, Cab Heat & Air, High 2007 S250 Bobcat Loader, 1840 Hrs, Gold Package, CN 90349..........................................................................$25,000 Flow, CN 89278................................................................$34,500 CN 91801..........................................................................$28,500

2006 331 Bobcat Excavator, 1640 Hrs, Open ROPS, CN 89355..........................................................................$21,000

PRE-OWNED, JOB READY EQUIPMENT NOW AVAILABLE! Parts • Sales • Service • Rental • Training Cincinnati • Mt. Orab • Columbus • Lexington • Louisville

PUT THE POWER OF TITAN to work for you

PARTS • SERVICE • RENTALS • SALES

855-44TITAN titanmachinery.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 27

Proud Achievements...

Case Construction Awards Luby Diamond Dealer Status Luby Equipment Services has been ed level of service in market, and building named a Diamond Dealer by Case enduring relationships with customers. Only Construction as a part of its 2014 Partnership 13 of the more than 75 Case dealers nationProgram. As a Case dealer since 1992, wide have been awarded Diamond Dealer Luby’s recognition as a high-performing status. dealership has been achieved by embracing By adhering to the motto of “Equipment the concept of deliveris Our Product, ing “stronger products, Service is our “I am proud to have stronger people, and Business” Luby stronger support.” has reached signifi“I am proud to have achieved this designation as cant Case market achieved this designaa Diamond status dealer.” share increases in tion as a Diamond staseveral categories. tus dealer,” said Bob Bob Luby Luby has improved Luby, president and its product support Luby Equipment Services CEO of Luby services by providEquipment Services. ing 24 hour parts “It indicates that we have demonstrated the deliveries, onsite technician availability, the leadership and dedication necessary to grow necessary amount of service vehicles, and the Case brand and have excelled in the role continued extensive training for parts, servof professional partner with our customers.” ice, and management personnel. Luby has lived up to Case’s brand prom(This story also can be found on ise through every aspect of its business: hir- Construction Equipment Guide’s Web site at ing the right people, delivering a differentiat- www.constructionequipmentguide.com.)

Western Construction Group Appoints Meyers to Safety Western Construction Group recently hired Mandi Myers of Weldon Spring, Mo., as a field safety manager. In her new position, Myers will conduct job site safety inspections to ensure the safety of Western Construction Group’s crews during projects. Myers has six years of industry experience, having previously worked as a health and safety professional, risk assessor, quality assurance and control leader, and senior health physicist for St. Louis-based Science Applications International Corporation. Family-owned and operated for nearly 100 years, Western Construction Group is one of the nation’s largest specialty contractors in masonry, concrete and facade restoration, waterproofing and specialty roofing. Western Construction Group is head- Mandi Myers For more information, visit www.westquartered in St. Louis, Mo. with more than 30 branch offices nationwide and employs erngroup.com. (This story also can be found on more than 1,200 salaried and hourly professionals who offer the best, time-tested tech- Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) niques and innovative technology.

LSC LIGHT TOWER • Kubota D1005bg Engine • Tier 4 Final Emissions • Water Cooling System • 28 Gallon Diesel Fuel System • 6kW Prime Power Rating, 60Hz, 1.OPF • 120 Available Voltage Single Phase

Call ASC Construction Equipment

Portable Power

Page 28 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

$62,999 Rental Ready TTerex erex® TLB840 TLB840 Bac Backhoe khoe LLoader oader

Equipped, not stripped. The TLB840 backhoe loader is built rental tough and ready to work for you. Standard features include:

4 wheel drive 88 horsepower Tier 4i engine Extendable dipper stick Wobble stick controls Purcha busine 1 -888-2 1-888-270-3584 or email us at opportunity@terex.com.

terex.com/construction terex.c

*T Terms and Conditions apply. $62,999 includes a TLB840 “A “A” package backhoe loader, loader bucket and backhoe bucket. “B”, “D” and “E” package machines available. $62,999 sale price and does not include shipping or taxes. $849 payment based on 60 month lease (1000 annual hours) fixed price purchase option at lease end of $29,106 (excludes sales tax). Subject to availability. Please contact T Terex erex Construction for financing options. For more information on machine specification n contact T Terex erex Construction at 1-888-270-3584. End user customers will be directed to their local T Terex erex distributor. Offer valid from July 14th, 2014 thru September 30th, 2014.

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ September 13, 2014 â&#x20AC;˘ Page 29

Â&#x160;Â&#x2022;Â&#x2022;Čą Â&#x2DC;Â&#x17E;Â? Call DougČąČŚ/Čą Â&#x160;Â&#x;Â&#x17D;ÇąČąČą Sam: (866) 485-7180

2004 Caterpillar 321C LCR: #92063, Cab/AC, QC, Aux Hyd, 9,100 hrs ....................................$64,500

2002 Caterpillar 325CL: #92079, Cab/AC, 31.5â&#x20AC;? Tracks, 10â&#x20AC;&#x2122; 6â&#x20AC;? Arm, QC, 12,100 hrs ........$69,500

2004 Deere 120C: #92046, Cab/AC, 27.5â&#x20AC;? Tracks, Mech Thumb, 4,200 hrs ..............$53,500

2001 Komatsu PC220LC-6LF: #80381, Cab/AC, 60â&#x20AC;&#x2122; Long Front, 5,700 hrs ......................$139,500

1983 Dresser TD20E: #92025, Cab, 24â&#x20AC;? Tracks, Drawbar, Sweeps ......................................$34,500

1998 Caterpillar D6M XL: #81916, Cab/AC, 24â&#x20AC;? Tracks, Winch, 13,500 hrs........................$99,500

2008 Komatsu D51EX-22: #82113, Cab/AC, PAT Blade, Sweeps, KOMTRAX, 2,650 hrs ..$112,500

2004 Komatsu D65EX-15: #80803, Cab/AC, 20â&#x20AC;? Tracks, Drawbar, 3,550 hrs ....................$117,500

2002 Komatsu WA250-3: #92018, Cab/AC, JRB QC, 8,200 hrs............................................$47,500

2007 Komatsu WA250-5: #82117, Cab/AC, JRB QC, 3rd Valve, 4,500 hrs ..........................$93,500

2006 Komatsu WA450-5: #81696, Cab/AC, GP Bucket, High Lift, 8,100 hrs....................$134,500

2006 Komatsu WA80-5: #81981, Cab/AC, QC/Bucket, 1,700 hrs................................$59,500

Page 30 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mobile Solutions Simplify Workforce Partnership Adds Management by Tracking Job Status Diesel Tech/Komatsu TECH from page 22

based on GPS coordinates, and condition of equipment based on telematics (temperature, humidity, moisture, pressure, etc.). Integrating this data with existing systems — sensory and vehicle control, dispatch, billing, maintenance — leads to better back-office control of jobsite activity. Workforce Management — Letting Employees Do Their Job More Efficiently Mobile solutions can’t take all of the labor out of construction, but they can simplify workforce management by handling timecards, tracking job and worker status, automating dispatch, delivering work orders, allowing mobile payment and using digital forms for approvals and data collection. Without computers and network access on job sites, most construction companies have continued to use paper for their timecards, work orders and inspection forms. Mobile devices now bring automation and efficiency to these processes with customized digital forms that capture requests and signatures on the job site and update back-office systems immediately. When converted to app-like dropdown boxes, complex forms become easy for field employees to fill out and submit on mobile devices. Recipients see the forms as PDF files, without the need to re-enter data from sheets of paper. When temporarily off the network, workers can still fill out forms on smartphones and tablets, and then submit them when reconnected. Even the staple of workplace reporting, the timecard, has moved to the mobile device. Construction companies can manage payroll costs and improve accountability when employees clock in and out from their wireless devices. With a few taps, field supervisors can clock entire work crews in and out. The GPS technology common to mobile devices not only announces turn-by-turn driving directions but also enables location tracking and reporting on your mobile workforce. Imagine seeing your employees on a Web-based map and assigning new jobs based on their locations, then having them confirm receipt, acceptance and status of those jobs. Applications built around GPS can improve your employ-

AT&T Enhanced Push-to-Talk This is an IP-based, end-to-end communications and applications platform. Enhanced PTT users enjoy sub-second connection times, and integration with an array of advanced mobility applications. Compatible rugged phone devices include the Sonim BOLT, Samsung Galaxy Rugby Pro and NEC Terrain. AT&T Enhanced PTT also runs on the Apple iPad and Samsung Galaxy Tab.

ees’ safety by allowing them to send alerts quickly. The real value in workforce management lies in backoffice integration — moving data back and forth smoothly between the mobile devices at the job site and the Web-based applications used by decision makers in the office. By eliminating redundant data entry, reducing fuel consumption, automating inspections and punchlisting, and improving workflow through location stamping and Web-based maps, mobile technologies can help construction firms complete more jobs per week with lower overhead. AT&T Enhanced Push-to-Talk — Streamlining Instant Communication Push-to-Talk (PTT) has become the standard way for project teams to communicate on the job site, whether across town or across the country. AT&T Enhanced PTT now has additional capabilities that enable construction workers to call dozens or hundreds of people at a time and check presence to see who’s available to talk. On a job site, AT&T Enhanced PTT is the fastest, easiest and best way to communicate instantly with a large project team, especially when workers are spread out over a large geographic area. Construction teams rely on AT&T Enhanced PTT for tasks as simple as locating and assigning work to employees and as high-impact as alerting the team pouring the foundation that the next load of concrete has just arrived. Supervisors can override PTT calls to communicate urgent, time-sensitive messages to their teams, and users can talk and use smartphone apps simultaneously. With Integrated Dispatch, main office employees can locate workers in the field and conduct PTT calls to one or many directly from a PC. Administrators can maintain and update contact lists for all AT&T Enhanced PTT devices in the field, also from a PC. To increase safety on job sites, AT&T Enhanced PTT calls can be conducted over compatible Wi-Fi connections, which may be handy for jobs where cellular signals do not reach. And being able to push a single button and notify everyone on a project about a broken handrail or a material spill goes a long way toward improving workplace safety. The combination of asset management, workforce management and AT&T Enhanced PTT can lead to compelling, time-saving-use cases in construction. Imagine a foreman receiving a notification on his Samsung Rugby device that a piece of equipment is in need of repair, then announcing the unexpected change to the affected group of workers over a one-to-many PTT call while using his phone to clock them out for the day. Or using an Android tablet to fill out an inspection form or punchlist while checking a map for the location of needed materials. For more information, call 800/926-5480, or visit http://resources.att.com/fieldsolutions. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Program at NDSCS Representatives of North Dakota State College of Science (NDSCS), Komatsu America Corp., General Equipment & Supplies Inc. and Road Machinery & Supplies Co. announced an educational partnership resulting in the addition of a Diesel Technology — Komatsu program to the NDSCS Diesel Technology department. Through this partnership, students will receive technical training on Komatsu construction equipment and related

“We are pleased to add Komatsu to our reputable list of partners and value their contributions…” John Richman NDSCS

products. A combination of classroom instruction, hands-on laboratory instruction and cooperative educational work experience at participating Komatsu dealerships, like General Equipment & Supplies Inc. and Road Machinery & Supplies Co., will provide students with extensive experience servicing Komatsu equipment. “We are pleased to add Komatsu to our reputable list of partners and value their contributions to this program,” said John Richman, NDSCS president. “With the recent completion of our $10.3 million diesel educational facility expansion, the time is right to add this highly technical Diesel Technology — Komatsu program.” The Diesel Technology — Komatsu program will be taught in Bisek Hall located in Wahpeton, N.D., beginning August 2014. Graduates of the program will earn an Associate in Applied Science degree (A.A.S.) designed to develop technically competent, professional service technicians. “NDSCS has been pivotal in making this partnership happen,” said Don Shilling, president of General Equipment & Supplies. “The need for highly educated diesel technicians continues to grow. In fact, we could easily hire a dozen technicians right now throughout our locations in North Dakota, Minnesota and South Dakota.” Through scholarship assistance, program costs associated with tuition, fees and supplies may be reimbursed up to 90 percent depending on a student’s grade point average (GPA). “We are excited to have our first batch of students starting at General Equipment & Supplies Inc. to officially launch this program,” said Shilling. “We anticipate even more interest as our recruiters visit high schools throughout the region to share about this high-tech program.” For more information, call 800/342-4325 or visit www.ndscs.edu/komatsu. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 31

Page 32 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mid Country Machinery (800) 206-5936

3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302 4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710 106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470

www.midcountrymachinery.com

2012 DEERE 850K WT, EROPS, 809 hrs. ....................$285,000

2011 Kawasaki 65ZV-2, EROPS, Heat, 3694 hrs...........$87,500

2011 CATERPILLAR 928H............................................$126,000

EXCAVATORS

WHEEL LOADERS

2014 KOBELCO SK500 LC-9, EROPS, Heat, A/C, 2 hrs........................................................................$359,000 2014 KOBELCO ED160, EROPS, A/C, Heat, 7 hrs ....................................................................................$CALL 2014 KOBELCO SK85 SR, EROPS, A/C, 2 units ava ............................................................................$131,520 2013 KOBELCO SK210 LC-9, EROPS, 3 Units aval. ............................................................................$163,500 2013 KOBELCO SK260 LR-9, Long Reach, 439 hrs ............................................................................$243,000 2013 KOBELCO SK295 LR-9, Long Reach, 245 hrs ............................................................................$238,500 2013 KOBELCO SK230 SRLC, Aux Hyd., A/C, 531 hrs ........................................................................$162,000 2013 KOBELCO SK140 SR, EROPS, Blade, Plumbed ..........................................................................$143,000 2013 SANY SY215 C, EROPS, Heat, A/C, 102 hrs................................................................................$129,900 2013 SANY SY135 C, EROPS, Aux Hyd, 2 Units aval.............................................................................$96,000 2012 KOBELCO SK350LC-9, EROPS, 2 Units aval. ..............................................................................$245,000 2012 KOMATSU PC220 LC-8, EROPS, Heat, 1062 hrs ............................................................................$CALL 2011 CAT 336EL, EROPS, A/C, Heat, 2427 hrs ........................................................................................$CALL 2007 KOBELCO SK250, EROPS, A/C, Heat, 4517 hrs ..........................................................................$120,000 2007 KOBELCO SK350 LC-8, EROPS, A/C, Heat ..................................................................................$105,000 2006 KOMATSU PC200 LC-8, EROPS, Thumb, 4235 hrs ......................................................................$74,500 2006 HITACHI ZX160, EROPS, Thumb, A/C, 2974 hrs ..........................................................................$68,500 2006 DEERE 230C LC, EROPS, QC, A/C, Autolube ................................................................................$85,000 2006 KOBELCO SK115 SRDZ, EROPS, Blade, Thumb ..........................................................................$63,000 2006 KOBELCO SK160 LC, EROPS, Heat, 6809 hrs ..............................................................................$49,500 2005 KOBELCO SK210LC-6E, EROPS, Aux Hyd. 5880 hrs ....................................................................$78,000 2005 KOBELCO SK250, EROPS, A/C, Heat, 4416 hrs ............................................................................$65,000 2005 KOBELCO SK160 LC, EROPS, A/C, Heat, 2182 hrs ......................................................................$67,500 2004 KOBELCO SK135 SR, EROPS, Heat, 5937 hrs ..............................................................................$39,500 1996 KOBELCO SK150, EROPS, Heat, 4133 hrs ....................................................................................$42,500

2014 KAWASAKI 70Z7, EROPS, Heat, A/C, 14 hrs ..............................................................................$204,000 2013 KAWASAKI 95Z7, EROPS, A/C, Heat, 236 hrs ............................................................................$425,000 2012 KAWASAKI 90Z7, EROPS, Ride Control, 841 hrs ........................................................................$265,000 2013 CAT 924K, EROPS, A/C, Heat, QC ....................................................................................................$CALL 2012 DEERE 624K, EROPS, A/C, Heat, 1083 hrs ................................................................................$149,500 2011 KAWASAKI 65ZV-2, EROPS, A/C, Heat, 3662 hrs ............................................................................$CALL 2011 CAT 928HZ, EROPS, Heat, A/C, 208 hrs......................................................................................$129,000 2010 CAT 924H, EROPS, QC, Ride Control, 1233 hrs ..........................................................................$118,000 2008 DEERE 544J, EROPS, Heat, A/C, 914 hrs....................................................................................$129,500 2006 CAT IT38G, EROPS, Heat, A/C, 7817 hrs ......................................................................................$75,000 2006 DEERE 644J, EROPS, A/C, Heat, 8262 hrs ......................................................................................$CALL 2001 CAT 950G, EROPS, Heat, A/C, Ride Control ....................................................................................$CALL

LOADER / BACKHOES 2011 JCB 3C-14, EROPS, A/C, Heat, 874 hrs ........................................................................................$62,500 2005 CAT 420DIT, EROPS, Heat, X-hoe, 5201 hrs ................................................................................$49,500 1998 DEERE 310SE, EROPS, A/C, Heat, 6814 hrs ................................................................................$28,000 1995 Case 580 Super L, EROPS, Heat, 9292 hrs ..................................................................................$21,500 1989 Case 580 Super K, EROPS, 8735 hrs ..............................................................................................$CALL

MINI EXCAVATORS 2014 KOBELCO SK35 SR-5, OROPS, Push Blade ....................................................................................$CALL 2013 KOBELCO 35 SR-5, EROPS, Heat, 2 Units aval. ............................................................................$41,000 2013 KOBELCO SK35 SR-5, OROPS, Aux Hyd., 220 hrs ......................................................................$32,500 2012 KOBELCO SK55 SR-5, EROPS, Aux Hyd, 235 hrs ........................................................................$59,000 2012 KOBELCO SK55 SR-5, OROPS, Aux Hyd., 287 hrs ......................................................................$59,000 2005 KOBELCO SK70 SR, EROPS, Plumbed, 2575 hrs ........................................................................$39,000

COMPACTORS 2012 BOMAG BW211 D-4, EROPS, A/C, 84” 184 hrs ............................................................................$83,500 2010 VIBROMAX VM46 PD, OROPS, 55”Pad, 162 hrs ..........................................................................$46,500 2010 CAT CD54, EROPS, 67” Smooth Double Drum ..........................................................................$105,000 2008 CAT CP56, OROPS, 84” Pad Foot, 1249 hrs ................................................................................$89,000 2008 CAT CP56, OROPS, 84” Pad Foot, 1255 hrs ................................................................................$87,000 2007 CAT CP563 E, OROPS, Pad Foot, 84”, 1391 hrs ..........................................................................$84,000 2007 DYNAPAC CA150 PD, OROPS, 66”, 228 hrs ................................................................................$55,000 2007 DYNAPAC CA250 PD, OROPS, 84”, 2030 hrs ..............................................................................$57,500 2006 CAT CP563E, OROPS, 84” Pad Foot, 6145 hrs ................................................................................$CALL 2006 CAT CS533 E, OROPS, 84”, 2413 hrs ..........................................................................................$72,000 2006 IR SD70 D, OROPS, Smooth Drum, 1354 hrs ..............................................................................$39,000 2006 IR SD70 D, OROPS, Smooth Drum ..............................................................................................$39,000 2005 BOMAG BW177 PDH-3, OROPS, Pad Foot, 1079 hrs ..................................................................$39,000 2004 HYPAC C832 C, OROPS, 66” Pad Foot, 1386 hrs ........................................................................$33,500 1998 HYPAC C850 C, OROPS, 84” Smooth Drum ....................................................................................$CALL 1988 Case 602B, OROPS, Pad Foot..........................................................................................................$CALL

DOZERS 2013 DEERE 750K XLT, EROPS, A/C, Heat................................................................................................$CALL 2012 CAT D8T, EROPS, 8SU Blade, Heat, A/C, 971 hrs ......................................................................$545,000 2012 DEERE 850K WT, EROPS, Winch, Sweeps, 809 hrs....................................................................$285,000 2011 CAT D6K, EROPS, A/C, Heat, 1647 hrs........................................................................................$170,000 2010 DEERE 550J, EROPS, Draw Bar, 6way, 2602 hrs ..........................................................................$65,000 2009 CAT D6T XW, EROPS, SU Blade, Heat, 4571 hrs ........................................................................$215,000 2008 CAT D6T XW, EROPS, SU Blade, ripper, 3580 hrs ......................................................................$212,500 2008 CAT D6T XL, EROPS, SU Blade, A/C, 4653 hrs ..........................................................................$186,500 2008 CAT D6T LGP, EROPS, Aux Hyd., A/C,4487 hrs ..........................................................................$190,000 2008 CAT D6T XL, EROPS, SU Blade, 4377 hrs ..................................................................................$195,000 2008 KOMATSU D65EX-15EO, EROPS, Winch, 4927 hrs ....................................................................$119,500 2007 CAT D6T LGP, EROPS, A/C, Heat, 1911 hrs ....................................................................................$CALL 2007 DEERE 850J LGP, EROPS, A/C, Heat, 5753 hrs ..............................................................................$CALL 2006 CAT D6R XLIII, EROPS, 6 way, Sweeps, 6568 hrs ......................................................................$142,500 2006 DEERE 550J LGP, OROPS, 6 way, 3294 hrs..................................................................................$43,000 2005 CAT D6R XLII, EROPS, SU Blade, A/C, 7547 hrs ........................................................................$123,500 2005 CAT D6R XWII, EROPS, Aux Hyd., 8361 hrs ..............................................................................$130,000 2005 DEERE 650J, OROPS, 6 way, 1473 hrs ........................................................................................$55,000 2005 DEERE 450J LGP, OROPS, 6way, 3916 hrs ..................................................................................$43,500 2004 CAT D6R XWII, EROPS, Heat, A/C, 12805 hrs ............................................................................$117,500 2001 DEERE 650H, OROPS, PAT Blade, 7182 hrs ....................................................................................$CALL 1987 CAT D6H, OROPS, SU Blade, 14439 hrs ......................................................................................$45,000 1988 Case 602B, OROPS, Pad Foot ..............................................................................$CALL BOOMLIFTS 2012 JLG 600S, 4WD, Sky Power, DSL, 958 hrs ..................................................................................$86,500 2012 JLG 340AJ, 4WD, DSL, 470 hrs ....................................................................................................$52,000 2011 JLG 1500SJ, 4WD, Sky Power, 878 hrs ......................................................................................$240,000 2009 JLG 400S, 4WD, Sky Power, 3308 hrs..........................................................................................$33,000 2008 JLG 800S, 4WD, Sky Power, 1914 hrs..........................................................................................$83,000 2007 JLG 800AJ, 4WD, DSL, 2251 hrs ..................................................................................................$76,600 2005 JLG 1200SJP, 4WD, DSL, 2145 hrs ............................................................................................$109,000 2005 JLG 600S, 4WD, Sky Power, 2319 hrs..........................................................................................$55,000 2005 JLG 450AJ, 4WD, DSL, 1729 hrs ..................................................................................................$37,000 2005 JLG 450A, 4WD, DSL, 2681 hrs....................................................................................................$29,500 2003 JLG 800S, 4WD, 80’ reach, 3558 hrs ..........................................................................................$46,000

FORKLIFTS 2013 SKYTRAK 10054, EROPS, FF Tires, 810Hr..................................................................................$118,000 2013 SKYTRAK 8042, EROPS, FF Tires, 794 hrs ..................................................................................$86,500 2013 SKYTRAK 8042, EROPS, FF Tires, 584 hrs ..................................................................................$85,000 2012 SKYTRAK 8042, EROPS, FF Tires, 623 hrs ..................................................................................$83,500 2012 SKYTRAK 10054, EROPS, FF Tires, 2034 hrs ............................................................................$102,500 2007 SKYTRAK 8042, OROPS, FF Tires, 2588 hrs ................................................................................$55,000 2006 GEHL DL10H-55, OROPS, 1574 hrs..............................................................................................$42,000 2006 LULL 1044C-54, OROPS, Outriggers, 5425 hrs ............................................................................$49,000 2006 SKYTRAK 8042, OROPS, FF Tires, 2373 hrs ................................................................................$55,000 2006 SKYTRAK 6042, OROPS, 2445 hrs ..............................................................................................$41,500 2005 SKYTRAK 6042, OROPS, 4x4, 2773 hrs ......................................................................................$42,000 1996 LULL 644B-37, OROPS, Tilt Carriage, 6331 hrs............................................................................$19,500

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 33

.com

2011 CATERPILLAR 247B3, ID# MUC0332, S/N TSL00465, 1943 HOURS, CAB, A/C..........................$35,200

2010 CATERPILLAR 304CCR, ID# MUC0323, S/N FPK06209, 728 HOURS, LONG STICK, QC ..........$39,500

2010 CAT 299C, ID# NUC0128, S/N JSP00798, 2045 HOURS, CAB, AC ..........................................................$51,100

2008 CATERPILLAR 247B3, ID# MUC0334, S/N MTL05340, 3984 HOURS, CAB/ A/C........................$22,300

2005 CAT TH580B, ID# 4CR5600, S/N SLH00488, 1860 HOURS, STABILIZERS ..................................................$54,300

2008 CATERPILLAR 246C, ID# NUC0067, S/N JAY01205, 4030 HRS, CAB, A/C ................................$22,900

2012 CATERPILLAR 262C ID# NUC0055, S/N MST04916, 494 HOURS, CAB, A/C, TWO-SPEED $39,100

2004 CATERPILLAR 312CL, ID# MUC0162, S/N CBA01734, 5078 HOURS, CAB, AUX HYD ..........$68,300

2010 CATERPILLAR D7E, ID# NBU0033, S/N MDB00198, 3600 HOURS, CAB..............................$350,000

2009 CATERPILLAR 12M, ID# MUC0321, S/N B9F00371, 4870 HOURS, CAB, AIR........................$144,700

2007 CATERPILLAR 324DL, ID# MUC0272, S/N JJG00430, 5003 HOURS, CAB,AIR..........................$114,300

2011 CATERPILLAR 336E, ID# NUC0031, S/N BZY00778, 3115 HRS, CAB, HEAT, AIR ................$230,100

2008 CAT D6TXL, ID# MUC0312, S/N LAY00759, 8075 HRS, CAB, AIR..............................................................$157,100

1999 CATERPILLAR 140H, ID# MUC0306, S/N 2ZK04464, 13822 HOURS, CAB/HEAT/AIR ..........$92,100

2009 CATERPILLAR 140M, ID# MUC0313, S/N B9D01851, 6280 HOURS, NICE UNIT..................$144,700

2008 CATERPILLAR 287C, ID# NUC0085, S/N MAS00628, 4803 HOURS, HIGH FLOW ................$30,800

Page 34 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Home on the Range...

Terex RT 670-1 Rough-Terrain Crane in Element on Farm When establishing a construction business in rural Iowa, there are a couple of certainties. First, the company will need to be flexible enough to either take on a broad range of work or travel long distances for jobs to remain profitable. Second, there will most definitely be a heavy dose of agriculture related projects. Located in north central Iowa’s Webster City, Peterson Construction has thrived and grown over the past five-plus decades, infrequently traveling beyond a market area where most communities are no larger than 50,000 people. The company successfully adapts to market needs, building wastewater plants, commercial buildings, pools, steam tunnels and libraries. “The construction market goes in cycles, and we go to where the work is and do what needs to be done,” said Senior Vice President of Peterson Construction Joel Peterson. However, it is the agricultural industry that has been the bread and butter for this third-generation family-owned business. A farm project was the reason behind its first hydraulic crane purchase in the 1970s. “It was an 18 ton crane,” said Peterson. “We were building a hog confinement facility and needed it for concrete placement.” As the company grew over the years, so too has its need for larger and higher capacity cranes. It currently owns a 30 ton (27 t) capacity Terex RT 230 rough-terrain crane and a 60 ton (54 t) class Terex HC 60 lattice boom crawler crane, among other models. Most recently, Peterson Construction had the need and opportunity to step up in crane size and purchased a Terex RT 670-1 rough terrain crane. Again, the acquisition was based on projects related to the agricultural industry, and this time it was for a fellow Webster City company that mirrors the same beginning and growth pattern as Peterson Construction. A Step Up Peterson Construction and Van Diest Supply Company both trace their beginnings to the mid-1950s

that would give them the capacity to work at a longer radius.” Bonnstetter showed Peterson Construction the 70 ton (64 t) capacity Terex RT 670-1 roughterrain crane from its rental fleet. “It had been ‘gently used,’ so we were able to get a price that allowed us to jump up to a 70 ton capacity crane,” said Peterson. “A rough-terrain crane sits at the job site throughout the duration of a project, so you have to justify the purchase. We wouldn’t have been able to do this with a brand new machine, but RTL took care of us by showing us the rental unit.”

The Terex RT670-1

and are third-generation family businesses. Van Diest has experienced significant growth distributing and processing agriculture chemicals for some of the top names in the business. This growth has dictated the need for significant expansion of the infrastructure of this rural Iowa business. Peterson Construction is the primary contractor working to build the infrastructure required to store Van Diest’s product. “We act as the general contractor, and we have a good relationship with the company and family,” said Peterson. “We are currently constructing Building 46 at the Webster City location.” The pre-engineered steel buildings range in sizes reaching 63,000 sq. ft. (5,853 m2) and house tanks with capacities ranging from

25,000 to 50,000 gal. (94,635 to 1.89 million L). With the agricultural market expanding over the past few years, Peterson Construction’s crews have been busy trying to keep pace with the additional construction at Van Diest’s Iowa complex using a 40 ton (36 t) capacity rough terrain crane. The company worked with Rob Bonnstetter — central Iowa field sales manager of RTL Equipment, an authorized Terex Cranes distributor — to recommend a new crane that would better fit Peterson Construction’s needs. “They had outgrown the 40 ton capacity crane that they were using to efficiently construct the steel buildings,” said Bonnstetter. “They required a crane in at least the 60 ton class

More Efficient Peterson Construction took delivery of the RT 670-1 crane at the end of May and immediately put it to work on the Building 46 project. It worked the opposite side of the building from the company’s Terex HC 60 crawler crane. Two additional Terex rough-terrain cranes, the RT 555 and RT 230 were used to help construct the tanks and pipe bridge structure that connects the buildings for product transfer. It didn’t take long for Peterson to see the vast difference offered by the RT 670-1 rough-terrain crane. “We don’t have to keep resetting the crane nearly as much, making us more efficient with lifts,” said Peterson. Most of the lifting for the RT 670-1 crane is pretty straight forward. It consists of picking and setting the building’s beams, columns, rafters and walls, as well as positioning the tanks. Additionally, the crane must set 15,000 lb. (6.804 t) chillers and 8by 8- by 8-ft. (2.4 by 2.4 by 2.4 m) pieces of process equipment. “We easily have more than 200 lifts with the rough-terrain crane for each building,” mentions Peterson. With the 40 ton capacity crane, Peterson Construction’s operator worked at a 50 to 60 ft. (15.2 to 18.2 m) radius for the building component lifts, which meant moving and setting the machine multiple times. Taking advantage of the RT 670-1 crane’s 111 ft. (33.8 m) hydraulically extendible boom, capable of extending under load, and additional capacity,

Peterson Construction is now making daily building picks at greater than an 80 ft. (24.4 m) radius. “We have already picked an object at 90 feet out, and we are setting up fewer times each day,” said Joel Peterson. Bonnstetter added, “The RT 670-1 crane offers more than twice the lift capacity of the 40 ton crane at these longer working radii.” Peterson knew that he was getting a higher capacity machine in the Terex rough-terrain crane, but he didn’t fully appreciate the crane’s capabilities before taking delivery. “You just don’t realize how much of a difference the extra capacity makes until you get it out in the field,” he said. “It makes me happy we made the investment in the additional capacity of the RT 670-1 crane.” Making the operator happy are the creature comforts and simple crane operation. “I grew up around construction and crane equipment, and there used to be a physical element operating these machines,” he added. “With the RT670-1 crane, there is none of that involved. The joystick controls are user friendly, and the crane is very simple to operate. It makes the operator more efficient.” When it is necessary to reposition the crane, its design helps to make the moves more efficient. The RT 670-1 crane is compact, and three steering modes allow it to nimbly maneuver around congested construction sites. A sixspeed powershift transmission with four-wheel drive enables the rough terrain crane to navigate extremely challenging terrain. All of these features have combined to help Peterson Construction get more productivity from its crane and crews. “With the RT 670-1 crane investment, our ultimate goal is to build faster, so we can erect structures in less time,” said Peterson. So far, it is turning out to be a wise investment. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 35

Page 36 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Major Wire Names Durand New Veep of International Sales

The SDLG LG948L lies in the most coveted capacity class for the region, with a 3.0 cu. yd. (2.3 cu m) bucket capacity. Some 62 percent of new wheel loaders purchased in North America are in the 2.5 to 3.5 cu. yd. (1.9 to 2.6 cu m) range, where the new LG948L falls squarely in the middle.

SDLG Supplies Growing Market Demand With LG948L Wheel Loader Companies in North America are demanding more and more equipment manufactured in China. The reason: value pricing and heightened manufacturing quality. This trend, as reported in outlets such as the Financial Times, is gaining steam in the oil and energy sectors, and it’s expected to reverberate throughout the construction equipment industry. To meet this growing market demand, SDLG is launching a new model wheel loader in North America — the SDLG LG948L. This new loader lies in the most coveted capacity class for the region, with a 3.0 cu. yd. (2.3 cu m) bucket capacity. Some 62 percent of new wheel loaders purchased in North America are in the 2.5 to 3.5 cu. yd. (1.9 to 2.6 cu m) range, where the new LG948L falls squarely in the middle. Alan Quinn, director of SDLG North America, said the company spoke directly to customers across the country to assess their application needs, and in doing so, found that a wheel loader with a 3.0 cu. yd. capacity would hit the “sweet spot.” “We spoke to customers at events like the Sunbelt Ag Expo in Georgia, World Ag Expo in California and Dakotafest in South Dakota, and found that most of them were impressed with SDLG’s wheel loaders,” he said. “Some customers, though, expressed that they would like an option with more capacity than the 2.4 cubic yard model LG938L, but not quite as much as the 4.0 cubic yard model LG959. Releasing the 3.0 cubic yard model LG948L enables us to fill that gap and offer a lineup of wheel loaders that can fit more customers’ needs.”

As with other SDLG models, the LG948L is aimed at wheel loader customers that don’t need the features of premium-priced machines, or those that might have purchased a used loader, but find a great value proposition in a new loader with excellent product support and a solid warranty. Typical SDLG customers are using them for applications as diverse as farming duties, feedlot operations, snow removal, general construction, material handling and more. Among the LG948L’s notable features: • 3.0 cu. yd. capacity • 173 hp Deutz Tier IVi engine • 27,100 lbf max breakout force • 30,200 lb. (13,698 kg) operating weight • Dry-disc brakes • ZF transmission • Hydraulic quick coupler with 3rd function hydraulics standard • Modern fit and finish, high visibility, operator friendly cab • Easy access to engine compartment for cleaning and maintenance • 12-month, 1,500 hour warranty “The LG948L is a great example of SDLG’s growth in North America,” Quinn said. “As the products become available at more and more dealerships around the region, so too, will our array of product offerings.” For more information, visit www.SDLGNA.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Alain Durand will continue to develop and manage international markets for the company, in conjunction with Germany-based Haver & Boecker, to further promote Major Wire and to increase sales for its Flex-Mat 3 and OptimumWire screen media product lines.

Montreal-based Major Wire Industries Limited hired Alain Durand as vice president of international sales. Durand has worked with Major Wire as a global market development consultant since May 2013. In his new role, he will continue to develop and manage international markets for the company, in conjunction with Germany-based Haver & Boecker, to further promote Major Wire and to increase sales for its FlexMat 3 and OptimumWire screen media product lines. Haver & Boecker acquired a minority share in Major Wire in 2012. Durand brings to Major Wire a strong background, with more than 20 years of experience in the mining industry. He has held positions with Rio Tinto and Xstrata, as well as other manufacturing companies, in leadership roles involving strategic planning, operations management, finance, procurement, logistics and information technology. For more information, call 450/659-7681 or visit www.majorwire.cc. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 37

CX 4 Chicagoland 4 Reasons to Choose Case Excavators With W ith ProCare The most complete maintenance support in the industry 1. 2. 3. 4.

Great financing—0% for 48 months The industry's best warranty—3-year full machine factory warranty Predictable costs—3-year/3,000 hour planned maintenance Productivity tools—3-year Advanced telematics subscription Call U s For a Demo!

Save the date: Friday Friday, iday y,, October 3 y Open House and Excavator Round-up at our Bolingbrook location

Illinois

Indiana

Serving the Constructor ®

McCannOnline.com

***Link-Belt TCC-750*** ***Link-Belt RTC8050*** 2012 Year Model, S/N: J6K2-2508, 1,700 Hours, Auxiliary winch, RCL internal light bar, A/C, Auxiliary lifting sheave, 28.5’ – 51’ 2piece fly, 40 Ton 4-sheave Block, 8.5 Ton Ball Sale Price: $342,000.00

Call For More Details! Jim Mackinson 704-517-1942

***Link-Belt 218HSL*** 2012 Year Model, S/N: N6K2-2982, 1,200 Hours, 150' Main Boom, 15-Ton Ball, 80-Ton Block Sale Price: $748,000.00 All FOB: Charlotte, NC

888-746-6222 www.pinnaclecranes.com

The Crane Service Company

2012 Year Model, S/N: R8K2-3002 1,000 Hours, 75 Ton Telescopic Crawler, RCL internal Light Bar, Amber Strobe Light, Boom Flood Light, 8.5 ton swiveling hook and ball, 40-Ton 4 sheave quick reeve hook block with safety latch, 35'-58' Offsettable Two-Piece Fly Sale Price: $681,500.00 All FOB: Charlotte, NC

Ask About Special Pricing With Multiple Unit Purchases!

Page 38 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Caterpillar 775G Off-Highway Truck, 1:50 Scale $110

Komatsu PC490LC-10 Excavator, 1:50 Scale $175

Case 580 ST Backhoe/Loader, 1:50 Scale $95

Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50 Scale$85

Caterpillar 336D L Excavator, 1:50 Scale ..................................$95

Komatsu D65 EX-17 Dozer w/Ripper 1:50 Scale ......................$80

Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale..........$85

Caterpillar D350D Articulated Dump Truck, 1:50 Scale ..........$50

Komatsu D65PX-17 Dozer, 1:50 Scale........................................$80

Allis-Chalmers Yellow HD21 Dozer w/Ripper, 1:50 Scale ...... $85

Caterpillar 365B L Series II Excavator, 1:50 Scale....................$75

Komatsu D375 A Dozer, 1:50 Scale ..........................................$125

Bobcat E35 Compact Excavator, 1:25 Scale ............................$50

Caterpillar 416B Backhoe/Loader (NZG 285), 1:50 Scale ......$70

Komatsu GD655 Motor Grader, 1:50 Scale................................$90

Bobcat E55 Compact Excavator, 1:25 Scale ............................$60

Caterpillar 428 Backhoe/Loader (NZG 2851), 1:50 Scale........$70

Komatsu HD605 Off-Highway Truck, 1:50 Scale ......................$80

Bobcat M400 Gold Skid Steer Loader, Scale 1:25 ..................$25

Caterpillar 631E Motor Scraper, 1:50 Scale ..............................$50

Bobcat S510 Skid Steer Loader, 1:25 Scale..............................$65

Caterpillar 740B EJ Articulated Dump Truck w/ Ejector Body,

Bobcat S530 Skid Steer Loader, 1:25 Scale..............................$65

1:50 Scale ........................................................................................$70

Bobcat S550 Skid Steer Loader, 1:25 Scale..............................$65

Caterpillar 963D Track Loader, 1:50 Scale ................................$60

Bobcat S570 Skid Steer Loader, 1:25 Scale..............................$65

Caterpillar 966K Wheel Loader, 1:50 Scale................................$95

Bobcat T770 Compact Track Loader, 1:25 Scale ....................$45

Caterpillar 977 Traxcavator, 1:50 Scale ......................................$60

Bobcat 225 Compact Excavator, 1:25 Scale ............................$50

Caterpillar 988K w/ Grapple, 1:50 Scale ..................................$160

Komatsu WB146 Backhoe/Loader, 1:50 Scale ........................$75

Case CX250C Excavator, 1:50 Scale ........................................$195

Doosan Moxy MT31 Articulated Truck ....................................$100

Komatsu WH613 Telehandler, 1:50 Scale ..................................$65

Case 95XT Skid Steer Loader (Conrad), 1:32 Scale ................$60

Dynapac SD2500 CS Road Paver, 1:50 Scale ........................$150

Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ......$90

Case 1102 Vibromax Roller, 1:35 Scale....................................$100

Hamm 3307 Compact Roller, 1:34 Scale....................................$45

Kubota KX91-2 Compact Excavator, 1:25 Scale ......................$60

Caterpillar CT660 Dump Truck, Yellow Cab, 1:50 Scale..........$80

Hamm 3414 Pad Foot Compactor, 1:50 Scale ..........................$90

Leeboy 8816 Asphalt Paver, 1:50 Scale ....................................$90

Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy Trailer,

International 175 Crawler Loader, 4in1, 1:50 Scale..................$65

Link Belt 210X3 Excavator, 1:50 Scale ......................................$45

1:50 Scale ......................................................................................$100

International 560 Pay Loader, 1:25 Scale ................................$145

Link Belt 800 X2 Excavator, 1:50 Scale....................................$200

Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale ............$65

International TD-15 Dozer w/Umbrella, 1:50 Scale ..................$60

Northwest 25D Shovel, 1:50 Scale ..............................................$75

Caterpillar D6K Track-Type Tractor, 1:50 Scale ........................$65

International TD-20E Dozer, 1:64 Scale......................................$24

Caterpillar D7E Track-Type Tractor, 1:50 Scale ........................$90

JCB 3CX Backhoe/Loader, 1:50 Scale........................................$75

Komatsu HM250 Articulated Dump Truck, 1:50 Scale ............$75 Komatsu HM400-3 Articulated Truck, 1:50 Scale ..................$100 Komatsu PC200 Excavator, 1:50 Scale........................$160 Komatsu PC360LC-10 Excavator, 1:50 Scale................$90 Komatsu WA500 Wheel Loader, 1:50 Scale..............................$80

Vogele 1900-2 Tracked Paver, 1:50 Scale ....................$140 Vogele MT3000 Powerfeeder, 1:50 Scale ................................$140

Caterpillar D8L Track-Type Tractor (NZG 233), 1:50 Scale......$75

John Deere “BO” Lindeman Crawler Tractor, 1:16 Scale ......$70

Caterpillar D8T Track-Type Tractor, 1:50 Scale ......................$110

John Deere 200C LC Excavator, 1:50 Scale..............................$45

Caterpillar D9N Track-Type Tractor (NZG 298), 1:50 Scale ....$75

John Deere 315SJ Backhoe/Loader, 1:50 Scale ......................$45

Caterpillar D10N Track-Type Tractor, 1:50 Scale ......................$50

John Deere 624J Military Wheel Loader, 1:50 Scale................$40

Caterpillar D10 Track-Type Tractor (Conrad), 1:50 Scale......$185

John Deere 772CH Motor Grader, 1:50 Scale ..........................$45

Volvo L220G Wheel Loader, 1:50 Scale ..................................$120

Caterpillar D10T Track-Type Tractor, 1:50 Scale ....................$100

John Deere 850K Dozer, 1:50 Scale............................................$65

Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale........................$90

Caterpillar D11R Track-Type Tractor, 1:50 Scale ....................$100

Komatsu CK25 Compact Track Loader, 1:50 Scale ................$45

Wabco Haulpak Off-Highway Truck, 1:24 Scale ....................$185

Caterpillar MH3049 Material Handler w/magnet, 1:50 Scale $150

Komatsu D51 PX Dozer, 1:50 Scale ............................................$85

Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale......$145

Caterpillar 323D L Excavator, 1:50 Scale ..................................$90

Komatsu D51 EX Dozer, 1:50 Scale ............................................$85

Wirtgen W250i Cold Milling Machine, 1:50 Scale ..................$160

Vogele Super 700 Small Paver, 1:50 Scale ................................$80 Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ....................$115 Volvo EC220D Excavator, 1:50 Scale........................................$115

Shipping and Handling Included

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ September 13, 2014 â&#x20AC;˘ Page 39

Satisfaction Guaranteed!

SPECIAL 7 FINANCING

SEAL SAVER PROTECTIVE CYLINDER COVER

ZERO DOWN For For one year on NO INTEREST Fabric Structures NO PAYMENTS

YRS

RESTRICTIONS APPL APPLY Y

KOMATSU D65EX-15

Made in the USA

The SEAL SAVER WILL: Protect cylinders from the elements â&#x20AC;˘ Eliminate dings and dents from falling debris â&#x20AC;˘ Reduce particle contamination of hydraulic systems â&#x20AC;˘ Prevent pitting due to chemical washes â&#x20AC;˘ Extend the life of cylinder seals â&#x20AC;˘ Eliminate rod scoring

STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road â&#x20AC;˘ Suite 15 Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

Visit

t 2VJDLMZ FBTJMZ JOTUBMMFE XJUI IFMJDBM QJMFT TIJQQJOH DPOUBJOFST NPSF t &BTZ UP EJTBTTFNCMF BOE SFMPDBUF t -PXFS FOFSHZ DPTUT XJUI OBUVSBM MJHIUJOH t 0OF TUPQ TIPQ PGGFSJOH BMM TFSWJDFT JO IPVTF t #VJMEJOHT VQ UP h XJEF BU BOZ MFOHUI

www.sealsaver.com

for more information or contact us at 1-800-683-5189

Kip Moore Debuts Video Honoring Men, Women of the Construction Industry Country music star Kip Moore debuted a new video Aug. 28 at www.CaseCE.com/OntheCase to the hard-working men and women of the construction industry. The song, â&#x20AC;&#x153;On the Case,â&#x20AC;? is a personal homage to his fanbase and the hardworking people that have inspired and supported him throughout his career. â&#x20AC;&#x153;These folks come out to my shows after working long shifts, 50 to 60 hour weeks, and I never forget that,â&#x20AC;? said Moore. â&#x20AC;&#x153;They take extreme pride in the work they do. It inspires me to put on the best show I can every night, and I wanted to thank them and honor their work and commitment with something they can relate to. The lyrics for â&#x20AC;&#x2DC;On the Caseâ&#x20AC;&#x2122; were written to do that.â&#x20AC;? In conjunction with promotional partner Case Construction Equipment, fans will be able to submit photos of themselves, their crew or their equipment at work helping to build the community for a chance to appear in a second fan cut of the â&#x20AC;&#x153;On the Caseâ&#x20AC;? music

fabric structures

Call 1.866.643.1010 and use code ADCEGMW or visit www.ClearSpan.com/ ADCEGMW and we'll send you a free gift.

Click

here for

whayne.com Now have instant access to Whayne Supplyâ&#x20AC;&#x2122;s large invento inventory ry of qualit quality, y, used Caterpillar â&#x20AC;&#x201C; and other branded equipment â&#x20AC;&#x201C; right from your own computer! Check out photos, specs, condition and availability with a click of your mouse! Internet site also links to

Country music star Kip Moore debuted a new video to the hard-working men and women of the construction industry.

video. Fans who submit photos also will be entered to win concert tickets for the upcoming â&#x20AC;&#x153;CMT ON TOUR 2014: UP IN SMOKEâ&#x20AC;? tour. Photo submissions will be accepted through Nov. 20, 2014.

other C CAT ATT dealers nationwide for a broader search search on catused.com. Easy! Fast! Current!

For more information, visit www.CaseCE.com/OntheCase. (This story also can be found on Construction Equipment Guideâ&#x20AC;&#x2122;s Web site at www.constructionequipmentguide.com.)

Your Yo our SINGL SINGLEE used equipment source source!!

WHAYNE WH AYNE SUPPLIES SUPPLIES

CONFIDENCE CONFIDENCE

Or,r, call us direct at 1-888-392-0057. O

Page 40 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Project Represents $43M Investment in Innovations

Bobcat Company and Doosan North America President Rich Goldsbury (L) shows dignitaries the Kiva brainstorming room at the Acceleration Center.

North Dakota Gov. Jack Dalrymple addresses the crowd at the Acceleration Center.

ACCELERATION from page 20

investment by Bobcat and Doosan in the Northern Plains Commerce Centre in Bismarck. Bobcat Company also has an attachments production facility in Bismarck, and its manufacturing, production control and logistics group has been there since 2012. “We built the compact equipment industry and continue to set standards, and reach milestones no other manufacturer can match — and that was all accomplished right here in North Dakota,” Goldsbury said. “We are very proud to call North Dakota home, and we’re proud to continue growing our engineering and innovation foundation in Bismarck.” For more information, visit bobcat.com or doosanequipment.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) see ACCELERATION page 68

North Dakota U.S. Sen. John Hoeven addresses the crowd at the Acceleration Center.

A steel Bobcat logo created at the manufacturing facility in Gwinner is on display at the Acceleration Center.

Bobcat Company and Doosan North America President Rich Goldsbury explains the significance of the new Acceleration Center.

SECTION

Attachment & Parts Pages 41-45

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Safe Operation Methods Help Avoid Trenching Troubles By John Thomas SPECIAL TO CEG

An inexperienced trencher operator can cause costly mistakes. From start to finish, educate yourself on the task at hand — know your digging conditions, recognize potential safety hazards and understand the relationship between your trencher attachment and prime mover. With this knowledge, you’ll be able to operate your trencher attachment like a pro, saving time and money. “It’s important to be familiar with and know the controls and adjustments on both your trencher attachment and prime mover,” said Dave Aldrich, light construction dealer development and service manager of Paladin Attachments, which includes Bradco trencher attachments. “Take time to learn how they operate now. Such knowledge is crucial for safe, efficient operation of your equipment.”

Power is supplied to the Bradco 640 trencher by this skid steer’s auxiliary hydraulic system.

Before You Begin Safety Stop: Inspect your job site and take notice of any potential hazards in the area. Trenching through a hidden utility line could cause electrocution and death. Call all utility companies and have them plot out all of their lines before operating your trencher attachment or dial 811 before you dig. Prior to starting a trench, it is always a good idea to plan out your job. Several variables need to be taken into account before trenching: • Trench requirements • Potential safety hazards • Digging conditions • Trencher tooth pattern • Digging chain tension

The Bradco 625 trencher is available in 30, 36, 42 and 48 in. (76, 91, 100 and 122 cm) digging depths to fit most applications.

Before your trencher touches the dirt, match the tooth type and pattern with your soil type. Talk with your dealer or manufacturer representative about the soil type you will be digging into. Then choose the proper teeth for your application: • Cup — The most common teeth chosen for trencher attachments. Ideal for good digging applications like black dirt, loam, moist clay, sand and sandy clay. • Shark — Ideal for rocky, abrasive or compact conditions like

caliche. • Frost — Ideal for the most extreme trenching applications like coral, frozen ground and fracturable rock. In order for your trencher attachment to be successful in these applications, you will also have to take into account your prime mover’s hydraulic horsepower capabilities and the depth you will be trenching. Trencher attachments do have their limitations, so match not only your trencher teeth to your digging conditions, but also the

Before your trencher attachment touches the dirt, match the tooth type and pattern with your soil type.

machine’s hydraulic capabilities and your trench depth. When trenching, it is important to have your trencher chain properly adjusted. You do not want the chain too loose or too tight depending on the style of boom and tensioning system you are using. Follow the manufacturer’s instructions in your operator’s manual for

proper adjustment. Safety Stop: Never work on or make adjustments to any part of your trencher attachment while the unit is running. You could get caught in the chain or digging teeth, which could cause severe injury or death. see TRENCH page 42

Page 42 • September 13, 2014 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Multi-ply Your Money! with the excavator rock ripping Multi-Ripper Bucket ®

Multi-Ripper Bucket Hi-Cap Multi-Ripper Bucket

Multi-Ripper

Multi-Ripper Bucket

n on As seye channel’s er Disco#v1 hit shosw Ru h” d l o G “ 6 to 9 times the force of a standard 5 tooth bucket 4 times faster than a hammer

Maximize force one tooth at a time, using our patented "Shanks on an Arc" technology.

eading "Leader in Excavator Rock Ripping Attachments" dge visit: www.digrock.com ttachments, e-mail: sales@leattach.com Inc. ®

call to order: 866-928-5800 or 508-829-4855

When First Starting, Set Prime Mover’s Engine to Half Throttle to Reduce Shock TRENCH from page 41

Starting & Stopping Your Trencher Power is supplied to most trencher attachments by the prime mover’s auxiliary hydraulic system. In this case, the trencher itself does not have an on/off switch, but is operated by the prime mover’s auxiliary hydraulic control mechanism. To start your trencher, engage the auxiliary hydraulics. To stop your trencher, disengage. Trencher speed and power are determined by the flow coming out of the auxiliary system, which is dependent on the prime mover’s engine speed. To increase trencher speed, increase the prime mover’s engine speed. To slow down your trencher, decrease the prime mover’s engine speed.

with the trencher boom directly over the center of where you will dig your trench. It will take about 4 ft. (1.2 m) of trenching before the trencher will be able to operate at the desired depth, so plan for this and position the trencher about 4 ft. behind where you want the actual trench to start.

Time to Trench When first starting a trench, set the prime mover’s engine to half throttle. This will reduce the shock to the prime mover and trencher attachment when the digging teeth first contact the ground. Position your prime mover A 60- to 65-degree trencher angle is recommended for general trenching.

Got MATERIALS to Move? No matter what your material, Pemberton has the bucket, grapple or forks to handle it and we can fit it to your specific wheel loader or excavator. We have the attachment you need for construction, demolition, logging and scrap material or waste handling.

Contact Pemberton today to see how we can help you maximize your equipment and your manpower.

Whatever Your Application: RECYCLING • LOGGING • CONSTRUCTION • AQUATIC • WASTE HANDLING • DEMO • SCRAP • ROAD & BRIDGE We Have Your Attachment: GRAPPLES • BUCKETS • CRUSHERS • RAKES • SHEARS • FORKS • CUSTOM ENGINEERING

CLICK OR CALL TODAY! PEMBERTONATTACHMENTS.COM • 1-800-393-6688

Once the trench is started, set the engine back to full throttle. Slowly lower the trencher arm into the ground to start the trench by lowering the trencher attachment with the loader arms and loader bucket controls. Carefully creep backwards as you roll the trencher boom down into the soil with the bucket and lift arms of the loader. Watch the crumber end so it does not get caught up on the trencher and continue to creep backwards. Once you have reached your required depth, you should be at a 60- to 65-degree angle with the trencher boom. A 48-in. boom will give you 48 in. of digging depth at a 65-degree angle. Safety Stop: Look behind you before reversing your prime mover to trench. Be aware of any person or obstruction in its path and observe any terrain changes such as drop-offs or soft ground. When trenching, remember to keep the discharge auger running about an inch off the ground; typically the skid shoe on the right-hand side of the machine will keep the auger at that height. This will keep the dirt pushed back away from the edge of the trench to help eliminate the spoil from falling back into the trench and prevent caveins. Avoid a Wrong Turn Turning your prime mover is easy. Add a trencher attachment to the mix and you have to be a little more cautious. Avoid making turns with your trencher attachment. A gradual turn or radius can be done, but you will put side loads on your trencher boom, causing excessive chain wear and possible damage to the boom and trencher assembly. Turning see TRENCH page 45

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • September 13, 2014 • Page 43

Page 44 • September 13, 2014 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • September 13, 2014 • Page 45

MAKE AN IMPACT WITH BRETEC

All Bretec breakers come fully CE compliant. Bretec's global network bases its operation out of state-of-the-art factory in Finland. The Bretec breaker full range comprises of breakers suitable from carriers 1,2 ton to 40 tons. Quality control processes from the factory right up to the point of installation ensure that each and every Bretec breaker will have you making an impact in no time. Dealer Inquiries Welcome, please contact scott.davison@sandvik.com, 404-345-3716

A All ll Br Bretec-models etec-models ar are e fully CE ccompliant ompliant

Make Make an Impact. Impact.

www.bretec.com www w.bretec.com

Keep Equipment Away From Trench to Avoid Cave-In TRENCH from page 42

too tightly while trenching will cause the trencher boom to bend and jam in the trench and stall, leading to excessive oil temperatures. Be cautious at all times when turning. To make sharp turns and 90-degree angles you will need to dig two trenches. Completing Your Trench Once you’ve dug your trench, remember that the trencher boom is at an angle and that you must continue trenching until the end of the boom has dug past the proposed end of the trench. Once the end of the trench has been dug, keep the trencher running and raise the loader arms to lift the unit clear of the trench. When the trencher has cleared the trench, disengage the auxiliary hydraulics to stop the trencher and then drive the prime mover away from the trench. Safety Stop: Keep equipment away from the trench after it has been dug so the weight of the unit does not cause a cave-in. “Remember, your trencher attachment’s

PROVIDING SUPERIOR PRODUCTS & SUPPORT SINCE 1996

performance is directly related to the power available from your prime mover’s auxiliary hydraulic system,” said Aldrich. “If the trencher seems to lack power or speed, it may be due to a lack of sufficient auxiliary power. Be sure to match the size of your trencher attachment with the hydraulic capabilities of your machine.” Trencher performance also is related to how well it is maintained, digging tooth wear and type and size of digging chain, crumber boom and shoe used. Consult your operator’s manual for maintenance tips or ask your local dealer. At the end of the day, taking the time to operate and maintain your trencher attachment correctly will save you time on the job and put money back in your pocket. John Thomas is the vice president of marketing and business development of Paladin Attachments, which includes Bradco Attachments, based in Dexter, Mich. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

ASK ABOUT OUR BREAKER AUTOLUBE SYSTEMS!

Page 46 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cloud-Based Workflow Lays Groundwork for Management CLOUD from page 8

On a global scale, for example, people trust and rely on secure online banking, enjoy a larger variety of products and services through online shopping, quickly order pizza, communicate with grandparents, socialize, and conduct real business. Smartphones and tablets have completely replaced clipboards and printed files. Rolled up paper plans for a building or a job site are becoming a thing of the past. At the same time, instant fieldto-office communication is becoming more important in a world of increasingly demanding deadlines. This technological evolution is no longer novel and interesting — it is now expected for being productive and achieving business goals. The Cloud and Geospatial Industries So where does the cloud fit in the geospatial industry? Quite simply, it is the next technological step… the safe and secure ability to share information and project related data in real time. However, the cloud is not merely FTP (file transfer protocol) data sharing. The technological ability to send and share data files has been around for decades. Simple file transfer functionality is not what the cloud is about. Instead, a proven value of the cloud is owning and using a private cloud-based company account. By representing a company in the cloud, geo-referenced projects (future, current and completed) now serve as containers for all related files. Plus, since these projects are geo-referenced, they are easily plotted on top of a vivid satellite image that streams in from a separate cloud service. By adopting new cloud-based workflows, the groundwork is laid for a complete project management system. A system that is secure and flexible and that will only grow. We are now at the point where companies will want to carve out a chunk of the cloud to own and use privately. A comparable analogy might be to own a car versus using public transportation. With a car, there’s the option to leave at will, setting the interior temperature, listening to whatever music, and

Managers can leverage cloud-based company accounts as a project coordination tool. Within Magnet Enterprise, managers have an at-a-glance dashboard to instantly see all of the company’s projects intuitively plotted on top of a streaming satellite image background.

choosing the route to travel. However, with public transportation there is far less control and a seatmate that may or may not be your preferred choice. Compared to private cloudbased company accounts, the open Internet can seem like loud and uncontrolled chaos, filled with Web sites demanding attention, threat of viruses and daily distractions. The loud and public transportation bus of the Internet has now been replaced with private cloud-based company accounts. A company that secures and adopts a chunk of the cloud can look back after a year of implementation and see dramatic improvements in workflow and daily processes. A cloud-based business will be faster and more efficient at what it does. The cloud is all about services. Services that provide access and security for communication, office processes, centralized file storage, entertainment and more. And recall that for maintenance and reliability, the cloud features a cluster or hive of interconnected computers that provide true redundancy. Therefore, if one server goes

down the others take over — a company’s data and archives are never at risk and are never lost. The Future Is Here The cloud is not just in the future — the cloud is here now. The novelty of the cloud has faded away and the expectation of readily available, ever-present services is now the reality. Moving forward, the global society will “expect” the cloud and its services to be constantly available. In a few years, the cloud will be as common and expected as electricity. Like someone walking into a dark room and patting the wall, looking for the light switch — electricity is taken for granted. No one questions how electricity is made or how it got there in the room. The common expectation of electricity always being present and available is very much how it will be for cloud computing. As with any new innovation, fears will diminish as the need grows. Business thinking and planning will shift from terms of noncloud tasks versus cloud-oriented tasks. Business owners and department managers looking to

hire the next crop of employees will notice that current college graduates have not just become accustomed to cloud technology, they expect it. This whole backstory of technological evolution and the emergence of the cloud leads to the big question: How can the cloud help with profitable projects in the survey and construction industries? Things to Know About Switching The term “cloud computing” is a broad umbrella under which many subdivisions fall. Construction contractors, land surveyors, GIS professionals and 3D model builders will encounter specific cloud-based applications or services being offered via subscription. One such service is Topcon’s Magnet Enterprise from Topcon, which offers the ability to pause and represent companies of all sizes within their own private cloud-based company account. At the core of the Magnet system of software solutions, Magnet Enterprise allows managers to start with a simple street address and

quickly create geo-referenced projects with the click of a mouse or tap of the finger. Managers can then assign employees (think permissions) to specific projects and tasks, and instantly have a dashboard to check any project’s status. It is designed to function as a connection hub for collaboration and to keep projects moving forward. Additionally, managers can have access to the details of past projects — timelines, who worked on the projects, and costs — which are archived for future reference. With the cloud, there is the easy access and secure exchange of information between the common organization triangle of manager, office, and field staff for design changes and project updates. Before company accounts in the cloud were available, if there was a need to communicate information to the field — e.g., a design change — there were three options: send an e-mail, deliver a thumb drive or make a phone call. Whatever method was used took time, which had an eventual impact on productivity and a project’s overall profitability. The Next Big Thing Cloud surfing? It’s super easy to do and extremely valuable. The term cloud surfing describes the option of connecting independent cloud services to each other. For example, Autodesk offers the nocost cloud service of AutoCAD 360. Through it, users can view, create, edit and share drawings files at no cost using smartphones, tablets or desktop devices. Magnet Enterprise supports cloud surfing by offering the ability to add AutoCAD 360 service credentials. Working within Magnet Enterprise, users can then easily “point to” Autodesk’s cloud for additional file storage and instant sharing. Magnet Enterprise cloud surfing connections are realized in the common scenario of designers in the office needing to deliver a change with special instructions to workers at an active job site. It makes no difference if the job site is across the street or on the other side of the globe. Using any web browser, updatsee CLOUD page 68

SECTION

Trucks & Trailers Pages 47-55

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Duraclass Unveils New Improved HPT ‘Tub’ Body Line DuraClass recently introduced the newly improved HPT “tub” body line. The line has been redesigned to meet all heavy duty dump body needs. A semi-elliptical body using high tensile steel, crossmemberless understructure, and a body sidewall without extra bracing add up to an exceptional payload-to-weight ratio. The rounded floor and low center of gravity give it strength and stability for heavy hauling. Loads are discharged cleanly from the curved body shell. The HPT-B1 features a closed fender design, and comes in 14- to 18-ft. (4.3 to 5.5 m) lengths in either carbon steel or stainless steel. The HPT-B1 has capacity ranges from 10- to 20-yd. (9 to 18 m). The HPT-B2 features an open fender design, which decreases the possible areas for rust and the overall body weight. The body comes

in 10- and 11-ft. (3 and 3.3 m) lengths in 3/16-in. AR400 carbon steel, and 14- to 18-ft lengths in 3/16-in Hi-Tensile carbon steel. The HPT-B2 also has an option for stainless steel. The line features full depth rear corner posts and fully enclosed front corner posts for added strength and durability and to keep dimensions true and rigid. Greasable rear hinges have the widest bearing surface and largest pin diameter in the industry. All heavy duty dump bodies from DuraClass feature a body sidewall that is shaped into a continuous completely enclosed top rail, side and running board configuration, eliminating the outside weld below the tarp rail and preventing moisture and freeze problems. Numerous HPT “tub” body options are available including a sloped tailgate, reverse asphalt

The HPT-B1 features a closed fender design, and comes in 14- to 18-ft. (4.3 to 5.5 m) lengths in either carbon steel or stainless steel. The HPT-B2 features an open fender design, which decreases the possible areas for rust and the overall body weight.

taper, sloping side panels, hi-lift tailgate (air or hydraulic), dual action side swing tailgate, body side steps and handles and air operated hoist controls. Users can customize their dump body’s side and tailgate heights, as well as select

from a variety of sliding door options and cylinder/doghouse configurations. Accessories for the HPT-B1 and HPT-B2 include patch gates, cab shields, LED lights, tarp rods and walk rails.

Additionally, DuraClass offers a line of HPT hoists. The hoists allow for an increased capacity as a result of high-pressure hydraulics and increased productivity with faster cycling. Furthermore, the hoists offer better stability with a low center of gravity and strong pin design. HPT hoists have improved longevity with hard chrome plated hoist sleeves. The frameless head-mount design is lighter weight and low maintenance. Based out of Tishomingo, Miss., DuraClass designs and manufactures a comprehensive range of premium Class 3 to 8 dump bodies, hoists and related equipment. For more information, call 800/255-4345 or visit www.duraclass.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Mack Trucks Academy Receives CASE Accreditation Highlighting Mack’s focus on developing quality training programs to encourage better service for its customers, Mack Trucks Academy recently received Continuing Automotive Service Education (CASE) accreditation from the National Institute for Automotive Service Excellence (ASE). The accreditation acknowledges Mack’s focus on quality and offering customers superior afterpurchase support and service. Mack Trucks Academy was evaluated against established industry standards to ensure that continuing education training meets best practices. “Receiving CASE accreditation spotlights the high-quality training

programs offered through Mack Trucks Academy,” said Stephen Roy, president of Mack Trucks North American Sales and Marketing. “Meeting CASE standards shows Mack’s commitment to developing exceptional training programs to help increase the service and support for our customers while continuing to support our dealers.” Training programs play an integral part in Mack’s customer support strategy and prepare dealer technicians and service personnel to support customers in each area of Mack’s Pedigree Uptime Protection service and support suite — service management, maintenance plans and vehicle

diagnostics. Mack Trucks Academy provides extensive training for 14 different dealership job roles, including sales, parts, service and technician, as well as training for drivers. Courses are available through e-learning and instructorled classes conducted at seven locations in the United States and Canada. ASE is a non-profit organization established to improve the competence of automotive technicians through voluntary testing and certification. ASE established CASE Accreditation as a voluntary program after perceiving the need for ongoing training of experienced service technicians to keep up with increasingly complex technology.

Mack Trucks received a 2013 Excellence in Learning Award from the Brandon Hall Group, a preeminent research and analyst organization focused on driving organizational performance. Mack Trucks Academy received a Gold Award, the highest honor, for its comprehensive curriculum and certification program that helps Mack technicians progress through training as they work toward becoming master technicians. Mack’s ongoing investment in technician training also includes a partnership with WyoTech, a premier technical school. WyoTech offers degree and diploma programs in the fields of automotive, diesel, collision/refinishing, motor-

cycle, marine and construction trades. WyoTech students enrolled in the Diesel Advanced Technology Education program receive specialized training on Mack engines, electronics, emissions, powertrain and chassis components. The program is designed to help students graduate as advanced apprentice technicians with a potential for an accelerated path to achieve Mack master technician status. For more information, visit www.macktrucks.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 48 • September 13, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

XL Trailers Showcases XL 110 Low-Profile HDG Trailer Ideal for hauling heavy construction equipment, the XL 110 low-profile hydraulic detachable gooseneck (HDG) trailer’s 13-ft. (3.9 m) long low-profile neck saves weight, allowing the truck plenty of clearance to attach, and has a five position variable ride height. The XL 110 low-profile HDG trailer features an overall length of 53 ft. (16 m) with an overall width of 102 in. (259 cm), and is rated at 110,000 lbs. (49,895 kg) capacity overall and 100,000 lbs. (45,359 kg) in 10-ft. (3 m) concentrated, for an efficient and versatile trailer on the road. To hold up from years of loading and unloading and keep tracks from slipping, the trailer has apitong decking — a wood much stronger than oak. Featuring a 26ft. (7.9 m) long main deck before the 32-degree approach, it includes 80K web and T1 flange steel, 13 chain slots and seven bent D-rings on each side, as well as heavy-duty removable swing-out outriggers for hauling extra-wide loads. The loaded deck has a height of 8 in.

The XL 110 low-profile HDG trailer features an overall length of 53 ft. (16 m) with an overall width of 102 in. (259 cm), and is rated at 110,000 lbs. (49,895 kg) capacity overall and 100,000 lbs. (45,359 kg) in 10-ft. (3 m) concentrated.

(20 cm) with a 24-in. (61 cm) ground clearance — a model with a height of 18 in. (45.7 cm) with a 6-in. (15 cm) ground clearance also is available for the XL 110 low-profile HDG trailer. The rear bridge is 14 ft. (4.2 m)

long with a 40-in. (101.6 cm) loaded deck height. To haul equipment on the rear bridge, the XL 110 is equipped with bolster chain slots and comes with the option of bolt-on load-bearing wheel covers for hauling loads on top of the

cover or semi-load-bearing wheel covers to drive equipment onto the bolsters. The bolt-on feature allows users to remove and attach them as needed. Equipped with a deep well that is specifically designed for long

booms, the trailer eliminates the need to detach the lower boom section on a scraper. The deep bucket well in the rear bridge easily accommodates excavators and the lowered rear angle from deck to wheel area allows for easier loading of equipment over the rear deck. The XL 110 low-profile HDG features three 25,000-lb. (11,340 kg) minimal axles on the rear bridge, spaced at 54.5 in. (138 cm) apart (XL also offers 60-in. [152 cm] axle spacing). “There have been several customized advancements in the XL 110 low-profile HDG trailer, including numerous tie down options,” said Rodney Crim, director of sales at XL Specialized Trailers. “This trailer has quickly gained a reputation as the go-to construction equipment hauler. For more information, visit xlspecializedtrailer.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Talbert 65-Ton Spread-Axle Trailer Provides Versatility The 65-ton spread-axle trailer outfitted with the E2Nitro nitrogen-assisted equalizing system by Talbert Manufacturing provides haulers the versatility they need to switch axle configurations and comply with individual state road regulations. This trailer also can be operated in a 70-ton (63.5 t) close-coupled configuration. Haulers can use the 65SA with a closecoupled fourth axle for a 70-ton rating or a spread-axle configuration for a 65-ton rating, and the trailer’s empty weight is lighter compared to West Coast-style trailers. The trailer’s East Coast-style E2Nitro spreader features a bearing pivot and pivot lockout for backing the trailer. In addition, the E2Nitro operator can hydraulically set axle loads and keep them there in all terrains. It also allows for a 14-ft. 1-in. (4.2 m) spread between the third and fourth axle, which is ideal for haulers traveling into states that require that spread. The E2Nitro system articulates left and right and uses nitrogen to equalize the up and down movement to provide proportionate weight distribution in each axle grouping. Through a combination of hydraulic and nitrogen equalization, the E2Nitro absorbs hauling and loading shocks and provides a greater range of suspension movement for

Haulers can use the 65SA with a close-coupled fourth axle for a 70-ton rating or a spread-axle configuration for a 65-ton rating.

reduced stress and a smoother ride. The system also acts as a hydraulic shim point between trailer and spreader. The E2Nitro also incorporates two-speed dual landing gear for greater stability when it is disconnected from the trailer. Finally, the 65SA with the E2Nitro makes movement on job sites easier because operators can lift rear axles when backing up or turning around. The Talbert 65SA features a 70-in. (178 cm), flip-up gooseneck extension to achieve a 190-in. (482 cm) radius. The unit also

offers removable kingpin stations for 120 and 108-in. (305 and 274 cm) swing radiuses, a 30-ft. (9 m) deck length and an 8-ft. 6in. (2.6 m) deck width. And, like all its trailers, Talbert manufactures the 65SA with heavy-duty T-1, 100,000-psi minimum yield steel. Optional deck lengths, deck types, and widths of 9 ft. (2.7 m), 9 ft. 6 in. (2.9 m), and 10 ft. (3 m) also are available.. The standard 65SA model has three different capacity ratings: 65 tons in a 15-ft. (4.6 m), 2-point rigid load base as a 3+2

spread-axle trailer with 30 ft. of deck; 65 tons in a 30-ft., 2-point rigid load base as a 3+2 spread-axle trailer with the addition of an 8-ft. (2.4 m) deck insert (38 ft. [11.6 m] overall); and 70 tons in a 16-ft. (4.8 m), 2point rigid load base as a 4-axle trailer with 30 ft. of deck. For more information, call 800/348-5232 or visit www.talbertmfg.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • September 13, 2014 • Page 49

Vermeer Sales & Service

Farm-Rite Equipment Inc.

1675 126th St. West Burnsville, MN 55337 952-890-6144 Fax: 952-882-2980 www.vermeerofminnesota.com

901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857 www.farmriteequip.com

Midwest Trailers Plus, Inc. 548 29th St. West Des Moines, IA 50265 515-223-8463 Toll Free: 888-560-2787 Fax: 515-223-6446 www.midwesttrailersplus.com

K.C. Bobcat 2209 W. 40 Highway Blue Springs, MO 64015 800-697-4228 Fax: 816-229-7631 Olathe, KS 800-598-4228 Platte City, MO 800-984-3001

McCann Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 • Fax: 630-627-8711 Bolingbrook 250 East Frontage Road Bolingbrook, IL 60440 630-739-7770 • Fax: 630-739-7699 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 • Fax: 312-421-3502 Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 • Fax: 708-597-9945

McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 • Fax: 815-385-2975 Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 • Fax: 219-865-0269 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 • Fax: 847-526-9448 www.McCannOnline.com

Titan Machinery Shakopee Division 6340 Hwy 101 Shakopee, MN 55379 952-445-5400 • 800-795-9274 Fax: 952-445-0365 Duluth Division 4311 Haines Rd. Hermantown, MN 55811 218-727-3038 • 800-795-0117 Fax: 218-727-2827 Rogers Division 14375 James Rd. Rogers, MN 55374 763-428-5099 • Fax: 763-428-5051 Industrial Division N1626 Wuensch Rd. LaCrosse, WI 54601 608-788-1025 • 800-780-1025 Fax: 608-788-1027 www.titanmachinery.com

Page 50 • September 13, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

ELZER’S B F F JE Dodge Ram Tough Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications.

TrailMax FWTD-70-PR 8 degree load angle with 33" deck height

Excellent for Pavers!

Design Your Ultimate Work Truck!

Gas-2500, Ready for Plow

2 ram 5500 4x4 108 c/a. please call for spec

2014 Ram 5500 4x4, 84” c/a, Sno-prep, Power Group

NEW PROMASTERS HERE & IN TRANSIT

COMMERCIAL HEADQUARTERS Jeff Belzer Ram Dodge, 21111 Cedar Ave., Lakeville, MN Please Call the Commercial Dept, 1-877-671-8226 OR 952-469-4444 All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change George Miller 952-469-6820 gmiller@jeffbelzer.com

John Zadurski 952-469-6817 jzadurski@jeffbelzer.com

Brent Loucks 952-469-5077 bloucks@jeffbelzer.com

Smart Body SBMT Construction Service Body Modular, Extra Large Toolboxes, Gooseneck Ball, Transfer Tank, Aluminum Deck, Customizable

Surf the Internet to the News, Equipment and all the information you need to keep up with the Construction industry @

Hydraulic Detachable Gooseneck

XL Specialized XL-70-HDG 13HP Honda Motor with aluminum pullouts

(800) 222-6047

Smartphone Users Visit Us Online

www.ZipsTransportEquipment.com

www.constructionequipmentguide.com

WE VULCANIZE

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • September 13, 2014 • Page 51

Ram 2500

Ram 5500

Ram 3500

with plow package

MSRP $66,065

MSRP $45,725

Fair Special $57,099*

Fair Special $35,999*

MSRP $48,965

Fair Special $39,999*

Ram 3500

Promaster

Cab & Chassis Crew

MSRP $34,965

MSRP $51,300

Fair Special $42,999*

Fair Special $29,999*

Choose from 32

Tows 20,800#’s Choose from 7

Choose from 2

2013 Ram 3500 Crew 4x4 Dually AIS A/T 850 Cummins P/W, P/L, T/C, A/C, Bedliner

MSRP $53,930

Fair Special $44,113*

#1 Chrysler Corp. Commercial Dealer in Minnesota

The fast lane for small business.

2014 Ram Caravan Cargo

Promaster 1500

P/W, P/L, T/C, A/C

FWD V/6 Auto, P/W, P/L, T/C, A/C

MSRP $23,310

MSRP $31,025

Fair Special $18,499*

Fair Special $28,579*

RAM H.D. HEADQUARTERS

18 Cabs and Chassis in Stock More Coming!

We Deliver! 32 Promasters

Ready to Go! FURY MOTORS South St. Paul, Minnesota Truck Master Dick Reineck • 651.251.8214 direct • rreineck@furymotors.com * Pricing represents all Denver business center rebates deducted!

Page 52 • September 13, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Kenworth Unveils Allison FuelSense Deals for Class 8, Medium Duty Trucks Kenworth has introduced Allison’s FuelSense packages for new Kenworth Class 8 and medium duty trucks specified with Allison Highway Series and Rugged Duty Series automatic transmissions. Allison’s FuelSense delivers a package of software and electronic controls that target critical components of a truck’s duty cycle to help enhance fuel savings. FuelSense incorporates features that automatically adapt shift schedules and torque, maximizing transmission efficiency based on load, grade and duty cycle, while maintaining superior performance. “The addition of Allison’s FuelSense to Kenworth’s product offering gives our new truck customers another opportunity to increase fuel efficiency and save money,” said Kurt Swihart, Kenworth marketing director. FuelSense is available in three packages, each featuring Allison’s new 5th Generation electronic controls. The controls are designed to improve fuel economy. The base package includes EcoCal and dynamic shift sensing. EcoCal works to lower engine speed. Dynamic shift sensing

automatically selects between EcoCal and a higher shift speed schedule based on the truck’s load and grade on which it is operating. In addition to those features, the FuelSense Plus package adds neutral at stop, which eliminates load on the engine when the vehicle is stopped to help reduce non-productive fuel consumption. For top fuel efficiency, the FuelSense Max package adds acceleration rate management. That management feature automatically controls the engine torque and is available in base, high and ultra economy options. For more information, visit www.allisontransmission.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) Allison’s FuelSense delivers a package of software and electronic controls that target critical components of a truck’s duty cycle to help enhance fuel savings.

Ditch Witch of North Dakota AIS Construction Equipment Corporation 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000 Fax: 517-321-4191

Towmaster’s T-120DTG detachable gooseneck trailer.

2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551 Fax: 701-663-0692

600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

3660 Interchange Road Columbus, OH 43204 614-443-9751 888-DITCHWITCH Fax: 614-443-9219 www.ditchwitchOH.com 9052 Marshall Road Cranberry Township, PA 16066 724-742-2844 888-DITCHWITCH Fax: 724-742-2877 www.ditchwitchPA.com

www.aisequip.com

Towmaster’s T-120DTG Detachable Gooseneck Made for Large, Heavy Iron Towmaster’s T-120DTG detachable gooseneck trailer is made for hauling large, heavy equipment. This series includes a main frame construction with T-1 steel, nonground bearing gooseneck, 10-in. (25 cm) crossmembers, standard open boom well, sealed-beam modular wiring harness, hydraulically operated gooseneck and polyurethane primer and paint. This new design, engineered using SolidWorks 3D CAD software, incorporates features that allow more options to be utilized with the trailer. Jeeps and tandem stingers can be added to maximize hauling capacity. The T-120DTG trailer main deck is redesigned for heavier loads by utilizing a 16 in. (40 cm) side-rail. A slight design change to the rear trunion area accommodates more options with less stress on the frame. The cylinder location on the gooseneck is in-line with the beams. This design allows the use of smaller cylinders and relieves stress on the gooseneck, yet provides the

1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 Fax: 701-282-3636

949 3rd Ave. Windom, MN 56101 507-678-2752

Vermeer Sales & Service 661 Hwy T14 Pella, IA 50219 866-483-7633 Fax: 641-628-4283 Vermeer Siouxland 4858 D. Ave. Marcus, IA 51035 712-376-2310 Fax: 712-376-2312

extra power needed to lift heavier loads. The familiar trough hookup design has been used for many years, and includes an air-pin lock standard. “While Towmaster’s detachable gooseneck trailers have been well received in the marketplace and now have a strong following, we had some customers wanting to haul heavier loads than our current design handles,” said Sales Coordinator Chris Pokornowski. “This new design gives our customers another choice when needing to haul large equipment and adding out Jeep or Tandem booster options. Some of our dealers have

asked us for a full line of trailers to offer ranging from small utility models to heavy-haulers and the new T120DTG helps round out the full model offers Towmaster has.” The T-120DTG has a 120,000 lbs. (54,431 kg) capacity in 16 ft. (4.8 m), heavy duty removable outriggers, 24 ft. (7.3 m) main deck and an air-ride suspension. For more information, visit www.towmaster.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Vermeer of Eastern Iowa 101 Commerce Blvd. Tipton, IA 50219 563-886-2444 Fax: 563-886-2223 www.vermeeriowa.com

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • September 13, 2014 • Page 53

Scharber & Sons, Inc. 6140 Highway 10 NW Anoka, MN 55303 763-323-1720 888-448-5266 Fax: 763-422-3949

1015 Highway 212 West Norwood Young America, MN 952-467-2182 Fax: 952-467-3259

13725 Main Street Rogers, MN 55374 763-428-4107 Fax: 763-428-2700 www.scharbers.com

3021 West 133rd Shakopee, MN 55379 952-445-6310 Fax: 952-496-0263 23580 Highway 55 Loretto, MN 55357 763-479-8200 Fax: 763-479-8201

901 Parker Ave. W. Dassel, MN 55325 877-570-2740 www.farmriteequip.com

1929 E. Madison Ave. Mankato, MN 56001 507-387-7376 Fax: 507-387-7399

www.westsidetractorsales.com 1400 W. Ogden Ave. Naperville, IL 630-355-7150

600 Walnut Ct Rockdale, IL 815-730-9011

7355 East 30th St. Indianapolis, IN 46219 317-544-3411

310 W. 162 St. Rt. 6 South Holland, IL 708-331-6362

2170 South Yost Ave. Bloomington, IN 47403 812-333-9677 Fax: 812-333-9731

3021 South 460 East Lafayette, IN 47905 765-477-6933 Fax: 765-448-9038

3120 Congressional Parkway Fort Wayne, IN 46825 260-482-8576 Fax: 260-483-4057

25166 State Road 2 South Bend, IN 46619 574-232-1461 Fax: 574-233-3324

3110 Prairie Rd. Rockford, IL 815-961-3160 1560 North Old Rand Rd. Wauconda, IL 847-526-7700

Page 54 • September 13, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • September 13, 2014 • Page 55

+ PLUS CURRENT

SCHEDULED MAINTENANCE1

+ PLUS

2-YEAR/24K

UPFIT CASH

OFFERS

On select models starting with 2014. eligible vehicles include purchased or leased new 2014 chevrolet cars, trucks, or crossovers in the u.S. covers scheduled oil changes with filter, tire rotations, and 27-point inspections, according to your new vehicle’s recommended maintenance schedule, for a maximum of four service events within 2 years or 24,000 miles, whichever comes first. does not include air filters. extra charge may apply for dual-rear-wheel tire rotations. See participating dealer for other restrictions and complete details. Not valid with all offers. allowance amounts include parts and labor. upfit cash is also available for the transfer of an existing upfit. See dealer for details. take delivery by 9/30/14. Fully backed by gm. gm accessories permanently installed at the time of new-vehicle delivery are covered under the new-Vehicle limited Warranty. if installed after delivery, coverage on parts and labor is for the balance of the new-vehicle warranty or a minimum of 12 months or 12,000 miles, whichever comes first. gm accessories not requiring installation or purchased over the counter carry a 12-month limited warranty on parts only. does not apply to licensed products. take delivery by 9/30/14. 4 Requires available Snow plow prep package (VYu) and Snow plow upfit. Snow plow upfit cash is good for the transfer of an existing snow plow. take delivery by 9/30/14. 5 Adrian Steel van equipment is warranted to be free from defects in material and workmanship, under normal use and service, for a period of 3 years or 36,000 miles, whichever occurs first from the date of delivery to the original retail purchaser when installed by an authorized adrian Steel distribu tor. adrian Steel is a registered trademark of adrian Steel. adrian Steel packages available via transportation fee of $200. See dealer for details. take delivery by 9/30/14. 6 To qualify, vehicle must be used in the day-to-day operation of the business and not solely for transportation purposes. must provide proof of business. For complete program requirements, including information regarding offers, vehicles, equipment, options, warranties, and ordering, consult your chevrolet dealer or visit gmbusinesschoice.net. take delivery by 9/30/14. 7 According to your vehicle’s recommended maintenance schedule for up to 2 years or 30,000 miles, whichever comes first. does not include air filters. covers six oil changes for gasoline engines and four oil changes for diesel. extra charge may apply for dual-rear-wheel tire rotations. See participat ing dealer for restrictions and complete details. ©2013 general motors. all rights reserved. 2 3

Page 56 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NEW M-SERIES IN STOCK! Authorized Bobcat Dealer

Toolcats in Stock, Call for Pricing Bobcat Excavators in Stock, Call for Pricing

Bobcat S650 with SB240 Snowblower Available Today

Bobcat Forestry Cutter on T320, for Rent

Largest Selection in the Midwest!

Bobcat Tractors in Stock Now! Call for Pricing. Ask about Incentives and Financing.

USED EQUIPMENT ®

Authorized Bobcat Dealer Bobcat 440 ................Starting at $4,500 Bobcat 463’s ..............Starting at $8,000 Bobcat 542B ..............Starting at $6,900 Bobcat 642 ..............................$7,500 Bobcat 642B ............................$8,500 Bobcat 743 ................Starting at $8,000 Bobcat 751 ......Several Starting at $9,900 Bobcat 753 ..............Starting at $10,000 Bobcat 763F, Series, Open Cab ....$11,500

Bobcat 773G, With Heat ............$15,900 Bobcat 843, Heated Cab ............$10,000 Bobcat 853’s ............Starting at $11,000 Bobcat 863, With Heat ..............$12,900 Bobcat 863G ............................14,900 Bobcat 873 ............................$17,900 Bobcat S130, 2006, Heated Cab ......CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours....Starting at $14,900 Bobcat S250..............Starting at $17,500

Compact Track Machines Bobcat T190’s............Starting at $17,500 Bobcat T200..............Starting at $17,500 Bobcat T250, Gold ......Starting at $24,500 Bobcat T300..............Starting at $25,000

Other Brands Gehl 4615 Skidloader, Open Canopy $8,500 Mustang 2105 ............................CALL New Holland L175........................CALL John Deere 250/260 Models Available...... ..............................................CALL

Excavators Bobcat 331’s, Several w/Heat & Open Canopys ..................Starting at $15,900 Bobcat 334 ................................CALL Bobcat 337D, A/C, HT ................$35,900 Bobcat 341 ..............Starting at $29,990 Bobcat 442 ....Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500 U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857 New Location: Farm-Rite Willmar 1515 West Litchfield Ave. • Willmar, MN 56201 320/235-3672 New Location: Farm-Rite of St. Cloud 810 Mayhew Lake Road N.E. • St. Cloud, MN 56304 844/262-2281

www.farmriteequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 57

Serving up to eight-percent more productivity than the models they replace, the IT4 diesel-powered 250G LC and 290G LC have insatiable appetites for work. Optimized hydraulics yield more muscle, so you can get in, get done, and get on to the next job. Even with their extra ability, these excavators don’t compromise the smooth control and multifunction capability that have become the trademark of our excavators. Customer-inspired refinements include a spacious, more comfortable cab. And an enhanced LCD monitor with rotary dial for easy turn-andtap navigation. Everything you need to pile even more work on your plate.

GOT A LOT ON YOUR PLATE?

DIG IN!

www.murphytractor.com

www.westsidetractorsales.com Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989/777-0090 Fax: 989/777-1583 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616/538-2400 Fax: 616/538-0449 Northeast Detroit 65809 Gratiot Ave Lenox, MI 48050 586/727-7502 Fax: 586/727-7311

West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248/437-8121 1-800/457-8121 Traverse City 8300 M-72 East Williamsburg, MI 49690 231/267-5060 Fax: 231/267-5257

Naperville, IL 60563 630/355-7150 Fax: 630/355-7173

Bloomington, IN 47403 812/333-9677 Fax: 812/333-9731

Rockdale, IL 60436 815/730-9011 1-800/937-3355 Fax: 815/730-9036

Fort Wayne, IN 46808 260/482-8576 Fax: 260/483-4057

Rockford, IL 61102 815/961-3160 Fax: 815/965-1810 South Holland, IL 60473 708/331-6362 Fax: 708/331-7334 Wauconda, IL 60084 847/526-7700 Fax: 847/526-3565

Indianapolis, IN 46219 317/544-3411 Fax: 317/544-3420 Lafayette, IN 47905 765/447-6933 Fax: 765/448-9038 South Bend, IN 46619 574/232-1461 Fax: 574/233-3324

www.nortrax.com

, Topeka, KS 800/279-6087

D 2 North Platte, NE B 2 800/894-7060

Columbus, EOH 800/222-2010

Ashland, WI 715/682-5522

Grand Rapids, MN 218/326-9427

Fort Dodge, IA 800/362-2487

Ulysses, KS 800/472-9238

Omaha, NE 800/416-5095

Lima, OH 800/423-7445

Chippewa Falls, WI 715/834-2924

Escanaba, MI 906/789-9054

Sioux City, IA 800/352-4693

Kansas City, MO 888/306-3434

Brunswick, OH 800/716-9796

Painesville, OH 866/800-1398

Monico, WI 715/487-5583

Louisville, KY 502/253-3721

Waterloo, IA 800/772-2019

Springfield, MO 888/306-2656

Cambridge, OH 740/439-2747

Mosinee, WI 715/693-3820

Richmond, KY 859/623-2030

Dodge City, KS 800/794-0172

Gering, NE 800/205-6784

Canton, OH 866/235-0438

Poland (Youngstown), OH 866/503-7259

Duluth, MN 218/722-7456

Bowling Green, KY 270/842-3400

Great Bend, KS 800/264-4056

Grand Island, NE 800/868-4017

Chillicothe, OH 740/663-5300

Bemidji, MN 218/759-1996

London, KY 606/862-8447

Des Moines, IA 800/822-2212

Park City, KS 800/262-0139

Lincoln, NE 800/416-5518

Cincinnati, OH 800/844-3734

Vandalia (Dayton), OH 800/233-4228 Cranberry Twp, PA 724/776-3636 Delmont, PA 724/837-4500

www.brookstractor.com Sun Prairie 1900 W. Main St. P.O. Box 9 Sun Prairie, WI 53590 608-837-5141 Milwaukee 12101 W. Silver Spring Dr. Milwaukee, WI 53225 414-462-9790 De Pere 1031 Lawrence Dr. De Pere, WI 54115 920-336-5711 West Salem 451 W. Avenue N. West Salem, WI 54669 608-786-2644 Plover 5429 Prairie Dr. Plover, WI 54467 715-254-2777

Page 58 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Volvo EC480E Delivers Breakout Forces Alongside Reduced Emissions IOWA

MICHIGAN

ZIEGLER CAT Altoona 800-342-7002 Atlantic 877-547-3819 Sioux City 712-252-4401 Fort Dodge 800-342-1848 Mason City 800-342-1849 Postville 800-526-0889

MILLER-BRADFORD & RISBERG, INC. www.miller-bradford.com Negaunee 800-562-9770

KENTUCKY DIAMOND EQUIPMENT www.diamondequipment.com Bowling Green (270) 781-1061 OHIO CAT www.OhioCAT.com Richwood (888) 446-4658

The EC480E delivers high digging and breakout forces alongside reduced emissions and improved fuel efficiency.

Powered by a Tier IV Final/Stage IV-compliant Volvo D13 engine, the EC480E delivers high digging and breakout forces alongside reduced emissions and improved fuel efficiency, according to the manufacturer. The full electro-hydraulics are perfectly matched to the engine and are controlled by an advanced system which provides on-demand flow and reduces power losses within the circuit. The Volvo ECO mode contributes to the machine’s total improved efficiency — without any loss of performance in most operating conditions. As well as improving fuel efficiency, this increases controllability for more precise performance. The integrated work mode system offers the operator a choice of work modes according to the task at hand — including I (idle), F (fine), G (general) and H (heavy) — for optimum efficiency and machine performance. When the controls have been inactive for a pre-set amount of time, the excavator can be programmed to automatically reduce engine speed or even shut down to further reduce fuel consumption and noise. Operators can keep track of both current and average fuel consumption via a simple gauge in the cab. User-Friendly Human Machine Interface (HMI) The EC480E has been designed for

ease and simplicity of operation, and all human machine interfaces —including the joysticks, keypad and LCD monitor — are ergonomically designed and positioned for optimum comfort and control. The number of switches has been significantly reduced in comparison to previous models, while the 8-in. color LCD screen, displaying machine status information vital for maximizing productivity and uptime, is easy to read in any light. To ensure operator safety, a seat belt warning alarm sounds if the operator seat belt is not fastened when the ignition key is turned. Maximum Uptime The Volvo EC480E crawler excavator has been designed not only for ease of operation but also for simple maintenance. This ensures maximum uptime and minimum expenditure on parts and servicing. The strong three-piece undercarriage and high tensile steel Xshaped frame have been reinforced to ensure a long service life, while additional superstructure cover plates prevent damage to the underside of the machine from rock and debris. The machine vitals are protected from damage by overheating due to a hydraulically-driven, electrically-controlled cooling fan, further minimizing fuel consumption and noise. The fan’s optional reverse functionality, which blows air in the opposite direction, enables self-cleaning for ease of main-

tenance. Daily service checks are quickly and easily carried out due to grouped service points and large, wide opening doors, helping to get the most out of every operating shift. The radiator, charged air cooler and hydraulic oil cooler are situated side-by-side to maximize efficiency, reduce blockages and aid in cleaning. The system is easily accessed from ground level by simply opening the side door. Moreover, the handrails and full-size guard rails facilitate safe entry and exit of the cab and maintenance access to the superstructure, while easy-clean anti-slip plates help the operator gain a sure footing. Uptime also is increased by the sheer versatility of the EC480E, which can be adapted with a wide range of purpose-built attachments. Volvo general purpose buckets are a useful tool for digging and re-handling in soft to medium conditions, while heavy-duty buckets are intended for productive digging in compacted materials. A selection of economic, replaceable wear parts including high quality teeth, segments, side cutters, adapters and shrouds also are available to protect the bucket and ensure long life. For more information, call 717/5329181 or visit www.volvo.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

WILSON EQUIPMENT CO. www.wilsonequipment.com Corbin (606) 528-0700 Lexington (859) 254-6443 Prestonsburg (606) 874-8036

MINNESOTA ZIEGLER CAT www.ZieglerCAT.com Minneapolis (800) 352-2812 Brainerd (877) 829-9850 Buhl (800) 446-9795 Columbus (866) 982-5656 Crookston (800) 422-5782 Duluth (800) 421-3831 Fergus Falls (800) 346-7649 Jackson (866) 847-6401 Marshall (800) 325-4929 North Mankato (877) 845-3938 Rochester (800) 247-1068 Shakopee (800) 352-2812 St. Cloud (800) 522-9469

OHIO OHIO CAT www.OhioCAT.com Broadview Heights (800) 837-6200 Sharonville (888) 332-4658 (Sales & Service) (888) RENT-441 (Rental) Columbus (888) 441-4658 (Sales & Service) (888) RENT-441 (Rental) Perrysburg (888) 339-4658 (Sales & Service) (888) RENT-441 (Rental) Troy (888) 330-4658 Youngstown (800) 837-6203 Cadiz (800) 837-6204 Canton (800) 837-6207 Zanesville (800) 837-6205 N. Canton (888) 736-8443 Oakwood Village (800) 633-1020

WISCONSIN MILLER-BRADFORD & RISBERG INC. www.miller-bradford.com Sussex 800-242-3115 Madison 800-585-7219 Eau Claire 800-585-7232 DePere 800-638-7448 Abbotsford 888-886-4410

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 59

ILLINOIS BIRKEY'S CONST. EQUIPMENT construction.birkeys.com Galesburg (309) 341-4360 Bloomington (309) 827-0520 Mattoon (217) 235-3158 Urbana (217) 337-1781 DIAMOND EQUIPMENT www.diamondequipment.com Mt. Vernon (618) 242-2273 WEST SIDE TRACTOR SALES www.westsidetractorsales.com Naperville (630) 355-7150 Rockdale (815) 730-9011 Rockford (815) 961-3160 South Holland (708) 331-6362 Wauconda (847) 526-7700

INDIANA DIAMOND EQUIPMENT www.diamondequipment.com Evansville (812) 425-4428 MACALLISTER MACHINERY SALES/RENTALS www.macallister.com Indianapolis (317) 545-2151 Indianapolis (317) 244-RENT (7368) Fort Wayne (260) 483-6469 (heavy equip.) (260) 969-3322 (rental store) Lafayette (765) 449-8191 (heavy equipment) (765) 446-5600 (rental Store) Terre Haute (812) 478-3155 (heavy equipment) (812) 231-6000 (rental store) South Bend (574) 288-6622 Washington (812) 254-1712 Bicknell (812) 735-0286 Bloomington (812) 349-9220 Fishers (317) 598-9700 Greensburg (812) 663-5829 Richmond (765) 966-0626 Yorktown (765) 759-2CAT (2228)

Page 60 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Panama Canal Anniversary Marred by Expansion Issues By Juan Zamorano ASSOCIATED PRESS

PANAMA CITY (AP) It was supposed to be a grand celebration of the engineering triumph that forged a nation. Instead, the 100th anniversary of the Panama Canal’s opening is being marred by doubts about the country’s ability to harness the full benefits of a multibillion-dollar expansion beset by cost overruns, strikes and the threat of competition from rival projects. The latest setback in the canal’s expansion came in May, when about 5,000 laborers walked off the job for two weeks as part of a strike over wages by construction workers nationwide. That followed a two-week stoppage in February in a dispute over $1.6 billion in extra costs between the canal’s administrator and the European contractor building a third new set of locks. Because of the interruptions and overspending, the original completion date of this October has been pushed back by 14 months and analysts say more delays can’t be ruled out. The construction of the 48-mi. (77 km) ship canal across the Isthmus of Panama a century ago transformed international trade, greatly reducing travel time between the Atlantic and the Pacific by eliminating the need for ships to go around the tip of South America. The construction claimed the lives of an estimated 30,000 workers, many from diseases like malaria and yellow fever. As part of the $5.25 billion expansion project, wider locks with mechanical gates will reduce congestion and be able to accommodate post-Panamex vessels, which are as long as three football fields and have the capacity to carry about 2.5 times the number of containers than held by ships currently using the canal. Canal administrator Jorge Quijano acknowledges he would have liked to finish the expansion in time for the centennial. “But we knew from the beginning a project as complex as this wouldn’t necessarily be done” on time, he said. Not everyone is as understanding. Taiwanese President Ma Ying-jeou complained about the delays during a recent visit to Panama, saying they affect his

country’s trade with the United States. Two major cargo shippers, Denmark’s Maersk and Taiwan’s Evergreen, have already rerouted part of their operations, depriving the canal of about $80 million a year, Quijano said. When funding for the expansion was approved by a referendum in 2006, its completion was envisioned as a coming out party for Panama, a chance to showcase the country’s pro-business credentials and role as a linchpin of global com-

“…we knew from the beginning a project as complex as this wouldn’t necessarily be done on time.” Jorge Quijano Canal Administrator

merce. Backers portrayed the vote as a bet on the future of Panama’s children in a country where poverty still affects a third of the population, a stain on what is arguably Latin America’s most-thriving economy. For the most part, the canal has blossomed under Panamanian management, contributing more than $8.5 billion in government revenue since the Americans handed it over on Dec. 31, 1999. But competition is lurking. Egypt is embarking on an expansion of the Suez Canal, and a Chinese firm was recently awarded a contract to build a waterway through Nicaragua, the path initially favored by 19th century American engineers. While just a threat on paper for now, Panamanian authorities have responded with the possibility of digging a fourth set of locks to maintain dominance.

Reflecting the more subdued mood, President Juan Carlos Varela opposed suggestions that the centennial be declared a national holiday. “The anniversary is best celebrated by working,” he told journalists recently. “Panama already has plenty of free days.” He later paid homage to the men who died working on the canal, laying flowers at the tombs of two Panamanian laborers. In a low-key ceremony earlier at the Miraflores locks, about 100 people, including canal workers, showed up to wave flags and greet cargo ships as they passed by. A school band played patriotic songs. Panamanians will celebrate their canal’s anniversary with an evening of fireworks and a free concert by salsa crooner Ruben Blades. A 500-pound cake will be served to hundreds of VIPs. Descendants of French engineer Ferdinand de Lesseps, the canal’s flamboyant first developer, are expected to attend. So are relatives of U.S. President Theodore Roosevelt, whose enthusiasm for the “big ditch” spurred the isthmus to proclaim its independence from Colombia in 1903 and sign a treaty granting perpetual control of the future waterway and adjacent 550-sq.-mi. canal zone to the United States. Nostalgia for those earlier days runs deep in Paraiso, or Paradise in English, a village on the canal’s Pacific Ocean entrance where blue U.S. mailboxes recall a vibrant, bygone era when it was part of the canal zone. While Panama has prospered in the past decade, taxi driver Carlos Bennett said the benefits haven’t been shared widely. Like many Panamanians, he’s counting on the canal expansion to lift the nation’s welfare but is concerned that the recent stumbles could backfire. “The anniversary should’ve been the moment to celebrate the expansion project, that all of Panama needs urgently,” said Bennett, the grandson of a canal worker who emigrated from the British Virgin Islands. “We can’t afford the luxury of looking like we’re incapable to the rest of the world.” (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

ARTBA Launches Dynamic Education Program Online The American Road & Transportation Builders Association (ARTBA) announced the start-up of the “Transportation Investment Advocacy Center” (TIAC), a first-of-its kind, dynamic education program and Internet-based information resource. The program is aimed at helping private citizens, legislators, organizations and businesses successfully grow transportation infrastructure resources at the state and local levels through the legislative and ballot initiative processes. The cornerstone of the new program is the Web site, www.transportationinvestment.org. ARTBA Chairman Doug Black said the site has been structured “so those interested in making action happen do not have to ‘reinvent the wheel’ to mount successful cam-

paigns.” The idea, he said, is “to put in one place — and promote the sharing of — current strategies, sample political and communications tools, legislative and ballot initiative language, and information on where to obtain professional campaign advice, research and help.” The transportationinvestment.org site features 39 detailed case studies of recent transportation funding campaigns — both successful and unsuccessful — mounted in 28 states. It includes the actual television, radio and print ads, polling data, and media and coalition strategies used in the campaigns. The site features a blog, which will be updated regularly with new developments and economic-based research and messaging developed by ARTBA to help frame the

political debate. An overview of funding and financing mechanisms utilized to support state and local transportation programs also is included. Complementing the dynamic Web site site, the TIAC program includes an annual workshop to be held in Washington, D.C., and ongoing webinars for transportation investment advocates featuring case studies, best practices, and the latest in political and media strategies. The inaugural “National Workshop for State & Local Transportation Advocates” will be held July 16 at the Washington Court Hotel on Capitol Hill. The workshop will be marketed to state and local chamber of commerce executives, state legislators, state and local transportation officials, “Better Roads

& Transportation” group members, industry and labor executives, and leaders of state and local chapters of national organizations with an interest in transportation development programs. The Transportation Investment Advocacy Center is a project of the American Road and Transportation Builders Association’s “Transportation Makes America Work!” (TMAW) program and funded through voluntary contributions and sponsorships. To become a sponsor or to make a contribution, contact TIAC staff directly through the Web site. For more information, visit www.artba.org. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Pages 61-65

Snow and Ice Section For more information on snow-clearing equipment and spreaders, visit CEG's Web site at www.constructionequipmentguide.com.

Snow Season Brings Warmth for SDLG Wheel Loaders All over North America, snow removal planning and purchasing is in full-swing. With snow removal equipment, budget is paramount. Wheel loaders used to remove snow aren’t used for many hours, as their usage demands are entirely dependent on the weather. As a result, the snowy season is driving both sales and rentals of SDLG wheel loaders across North America. The attraction is simple: SDLG wheel loaders require less of an initial investment than their premiumpriced counterparts, but without sacrificing quality. Chad Gerondale, who handles marketing and special projects with Alaskabased Construction Machinery Industrial (CMI), is seeing an uptick in snow removal sales and rentals, especially SDLG wheel loaders. “The key to purchasing snow removal equipment is return on investment. If it doesn’t snow too much, the machine is left idle and the company isn’t generating revenue,” he said. “The value proposi-

tion of SDLG wheel loaders is ideal, as with one SDLG loader you can retire two pickup trucks. It doesn’t make sense to purchase a more expensive machine because there’s no guarantee it will work enough to see a benefit. Those customers buying and renting SDLG wheel loaders are saying very good things about the machines, too.” One of those customers is Anchorage-based Boehmer Services. Boehmer is an independent snow removal and asphalt maintenance company that purchased an SDLG wheel loader in the fall of 2013. So far, it’s put some 180 hours of snow removal work on the machine. Saygen Boehmer, president of the company, said that value pricing of the SDLG LG938L initially piqued his interest, but now that he’s spent a full season using the loader for snow removal, it’s the features that make him a fan. “For the price, I think SDLG wheel loaders are the best in their class,” he said. “The four-wheel turning comes in really handy for

Cole Koch, superintendent and part-owner of Double K Excavating, in front of the company's snow-covered SDLG LG959.

snow removal and really, it turns better than any premium-priced machine I’ve ever used. The fiveyear warranty was also big reason I went with SDLG — I know that if I have any problems, CMI has guaranteed its best support and service.” Government Use Regional and local governments are making their snow removal purchases now, too, and many are choosing SDLG. In Canada for example, the rural municipalities of Sarnia and Caledonia, both in

Saskatchewan, have purchased SDLG wheel loaders with the intent to use them on snow removal projects. Both groups purchased the 2.4 cu. yd. (1.8 cu m) bucket SDLG LG938L. Al Quinn, director of SDLG North America, said that with public funds, money is tight and closely-watched. Groups are looking for the best bang for their buck, but not if it means sacrificing quality. “SDLG provides a great option for municipalities because often, the machines aren’t working 24/7/365, so there’s no need for the

features of a premium machine and no need to worry about recouping that high of an investment,” he said. “But that doesn’t mean the wheel loaders can be low quality — people in their regions depend on their vital services, so they must buy a machine that will work well and is backed by great product support and service. SDLG provides just that.” SDLG has four wheel loaders available across its dealer network: The LG938L, a 2.4 cu. yd. capacity wheel loader; the LG948L, a 3.0 cu. yd. (2.3 cu m) capacity wheel loader; the LG959, 4.0 cu. yd. (3 cu m) capacity wheel loader; and the LG958L, which has the same basic specs as the LG959, but with dry disc brakes rather than wet disc. All four loaders are backed by a 12month, 1,500-hour warranty. For more information, visit www.sdlgna.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Case Offers SR250, SV300 Snow Packages Case Construction Equipment has released a new snow removal package for the SR250 and SV300 skid steers that optimizes the machine for snow removal applications and simplifies the ordering process through the Case dealer network. The 90 hp SR250 (radial lift) from Case Construction Equipment offers a rated operating capacity of 2,500 lbs. (2,700 lbs. with optional counterweight) and breakout force of 7,480 lbs. The 90 hp SV300 (vertical lift) offers a rated operating capacity of 3,000 lbs. (3,200 lbs. with optional counterweight) and a breakout force of 7,570 lbs. The new snow removal package includes high-flow auxiliary hydraulics that provide up to 37.6 gpm (142 L) for use with

snow blowers and brushes. The package also comes with hydraulic self-leveling and ride control, both ideal for smooth and controlled boom operation while engaged and while traveling. The new package also includes an enclosed cab and a heated airride suspension seat for optimal operator comfort during long days of working in cold environments. It also comes with a block heater to assist in cold starts, and a 4corner LED strobe kit and heavy-duty lighting package/side lamp kit for optimal visibility — both for the operator and for drivers/pedestrians in the area. The package also comes with larger tires (14 X 17.5) for more speed and power while working on paved surfaces. A heavy-duty rear door and hydraulic couplers further add to the pack-

age’s reliability. The SR250 and SV300 also are outfitted with a new EZ EH (electro-hydraulic) setup menu that features nine preset speed and control settings that can be adjusted on the fly. This allows the operator to match controls to their preference. A single rocker switch allows operators to switch between the CASE “H” operating pattern and ISO pattern controls. New handles with additional “feel points” improve controllability and feathering. The SR250 and SV300 also offer one of the widest cabs in the industry at nearly 3 ft. (.9 m). The cab is fully sealed and pressurized against noise, dust and fumes. The cab-forward design provides best-in-class visibility, and the low step and entry thresh-

The new snow removal package includes high-flow auxiliary hydraulics that provide up to 37.6 gpm (142 L) for use with snow blowers and brushes.

old makes it easy for the operator to get in and out of the cab. As with all Case skid steers, the engine, filters and fill points are all located at the rear of the machine for easy access. For more information, visit www.CaseCE.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 62 • September 13, 2014 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

Stainless Steel Tailgate Spreader Designed to Meet High Demands Crysteel Manufacturing’s stainless steel tailgate spreader is designed to effectively spread deicing materials while meeting the high demands for efficiency and dependability all winter long, according to the manufacturer. Corrosion resistant stainless steel delivers durability in the toughest environments, and a fully tapered trough eliminates all flat surfaces, preventing material hang ups. Available with a 6- or 9-in. (15 or 23 cm) auger, the tailgate spreader also features a full opening bottom trough hinged on the body side for easy accessibility and clean out. The direct drive design minimizes maintenance and allows independent control of the auger and spinner. The Crysteel stainless steel tailgate spreader is backed by a twoyear warranty.

The FFC V-Blade easily adjusts to achieve straight, left/right, scoop or V-position, providing the versatility needed to efficiently remove snow from walks, driveways and parking lots.

FFC V-Blade Easily Adjusts for Diverse Plowing Operations

Winter Xtendor Cutting Edge System Winter Equipment Company has designed a snowplow blade system for small plow truck contractors. The Xtendor System is designed to increase blade life as much as 400 percent and it will help eliminate the hassle and cost of blade replacement for a contractor’s light duty trucks, according to the manufacturer. Easy-to-assemble system comes complete with 1.5 by 6 in. (1.3 by 15 cm) high quality steel cutting edge two Winter Xtendor PlowGuards with Winter Carbide Matrix protection on bottom and blade end, plow bolts and assembly instructions. For more information, call 800/294-6837 or visit www.WinterEquipment.co m.

The FFC V-Blade manufactured by Paladin Attachments attaches to skid steers and compact wheel loaders up to operating weights of 13,200 lbs. (5,987 kg). The FFC V-Blade easily adjusts to achieve straight, left/right, scoop or V-position, providing the versatility needed to efficiently remove snow from walks, driveways and parking lots. It comes in blade widths ranging from 60 to 120 in. (152 to 305 cm) and

The FFC V-Blade offers a reversible cutting edge designed to deliver greater wear life than traditional cutting edges. is available with a hydraulic sequencing valve or Paladin’s electro-hydraulic system, which improves blade control and independent blade function, according to the manufacturer. The FFC V-Blade offers a reversible cutting edge designed to deliver greater wear life than traditional cutting edges. Fully adjustable skid shoes allow the user to match operations to varying job conditions, while top and side pinch guards increase safety and keep the pivot area free of debris. The FFC V-Blade is engineered with fewer components and less hardware than other adjustable snow blades, making it up to 200 lbs. (90.7 kg) lighter than other models and easier to maneuver. In addition, the design incorporates a robust central ball joint that allows for improved multiaxial movement. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • September 13, 2014 • Page 63

TOPPERS PLUS 1929 East Madison Ave. Mankato, MN 56001 507-387-7376 800-321-7587 www.toppersplus.com

TRUCK UTILITIES 2370 English St., St. Paul, MN 55109 651-484-3305 800-869-1075 2770 5th Ave S., Fargo, ND 58103 701-241-9411 800-972-9250 www.truckutilities.com

NORTH CENTRAL TRUCK & EQUIPMENT 2629 Clearwater Road St. Cloud, MN 56301 732 30th Avenue SE Minneapolis, MN 55414 877-485-9595 www.northcentralinc.com

TRUCKIN’ AMERICA 4720 Hwy. 52 N. Rochester, MN 55901 800-556-4720 507-285-9855 www.truckinamerica.com

Page 64 • September 13, 2014 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • September 13, 2014 • Page 65

YOUR SNOW & ICE EQUIPMENT SOURCE

TRUCK UTILITIES, INC. ST. PAUL 651-585-3305

www.truckutilities.com PARTS: SERVICE 7:30 - MIDNIGHT

SINCE 1963

FARGO 800-972-9250

Flink FXP Plow Expands With Flip of a Lever

TRIPLE THREAT.

V C

_______________________ ____________________ ___________________

NOTHING’S TOUGHER, SMARTER OR FASTER than THE BOSS XT line of plows, including the NEW Poly Power-V XT. A rock-solid combination of professional-grade toughness, Power-V versatility and super-slick poly efficiency, the newest XT is unlike any plow in the industry. But that’s no surprise coming from THE BOSS. We’ve been driving the industry forward for 24 years with products that make your job faster and easier. Simple as 1-2-3. STOP IN TODAY!

THE BOSS XT PLOWS: • NEW Poly Power-V XT… 8'2" 9'2" • Steel Power-V XT……… 8'2" 9'2" • Super-Duty XT…………. 8'0" 8'6" 9'0" • Taller blade and enhanced curl • 37" tall flared blade wings on Power-V models • High-performance cutting edge • SmartHitch ® 2 • SmartLight ™ 2 ® • SmartTouch 2 • SmartShield ® Steel Power-V X Super-Duty X 8'6" 9'0" T

CANNON TRUCK CRYSTEEL TRUCK ( D E A L E R I M P REQUIPMENT INT) EQUIPMENT

The Flink FXP plow expands horizontally from 11 to 17 ft. (3.3 to 5.2 m) at the flip of a lever. The right and left sides move independently of each other and there are no pivot points. Designed for large lots and highways, the plow is placed out in front for better visibility, safety and control. For more information, call 815/673-4321 or visit www.flinkplows.com.

51761 Danview Technology Court 52248 Ember Rd. Shelby Twp., MI 48315 Lake Crystal, MN 56055 586-991-0054 507-726-6041 Fax: 586-991-0074 800-722-0588 ©2009 BOSS Products/Northern Star Industries, Inc. www.cannonequip.com Fax: 507-726-2984 1130 73rd Ave. N.E. Fridley, MN 55432 763-571-1902 800-795-1280 www.crysteeltruck.com ©2009 BOSS Products/Northern Star Industries, Inc.

• SmartShield ® b o s s p l o w . c o m

Page 66 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cat Reaches 75,000 Wheel Tractor-Scrapers Milestone

Caterpillar Inc. employees marked a major milestone recently, commemorating the production of 75,000 wheel tractor-scrapers at the Decatur, Ill., facility.

Caterpillar Inc. employees marked a major milestone recently, commemorating the production of 75,000 wheel tractorscrapers at the Decatur, Ill., facility. The historic machine, an open-bowl, twin-engine 627K, is built to move high volumes of material quickly and economically with optimum fuel efficiency, according to the manufacturer. “Scraper sales have been rebounding steadily in North America since the last downturn,” said Caterpillar Mining Products Vice President Tom Bluth. “And with our new K Series machines, we’re in a great position to win business outside North America as construction investment recovers.” “Congratulations to all who helped design, build, deliver and support 75,000 scrapers,” he continued. “Employees, dealers, suppliers — past and present — we appreciate the role you played. We also extend our thanks to tens of thousands of Caterpillar customers who have put their trust in Cat scrapers for generations.” Scrapers were one of three product families, along with track-type tractors and motorgraders, upon which Caterpillar built its business following World War II. As the U.S. economy boomed and populations began migrating from cities to suburbs, housing and infrastructure construction exploded, spurring demand for high-volume earthmoving tools like the wheel tractorscraper. Growth was strong all over the world as new global infrastructure began to take shape. Caterpillar responded by

expanding the product line and investing in manufacturing capacity, including the operation in Decatur. “Just about any major infrastructure project undertaken in the past 70 years, anywhere in the world, you can bet Cat scrapers played a role,” said Sankar Kurumbail, wheel tractor scraper product manager at the Caterpillar Decatur plant. “When it comes to high-speed, high-volume earthmoving, it can be hard to find a more economical option. They’re some of the most durable products in our line, too; it’s not unusual to see a scraper from the 1970s still working hard today.” While older models continue to deliver reliable performance, the Cat scraper line has been updated over the years to help customers meet the changing requirements of earthmoving projects. Today’s K Series models feature automated cycle functions, high-pressure steering, engine-overspeed protection, fuel economy mode, payload monitoring and other innovations that simplify operation, reduce maintenance and boost fuel efficiency, according to the manufacturer. “The K Series scrapers are part of a rich legacy the Decatur team is carrying forward every day,” Kurumbail said. “That 75,000th machine was built with the same goal as the first one: making our Caterpillar customers more successful.” For more information, visit www.cat.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 67

Page 68 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Topcon Offers Any Size Company Its Own Private Cloud CLOUD from page 46

ed drawing files can be uploaded to services like AutoCAD 360 for quick viewing and potential redline edits. Project managers can then log into their private Magnet Enterprise company account, click on the AutoCAD 360 option, and see all files within their AutoCAD 360 account. Meanwhile, field crew members at a job site can log into their private cloud-based company account and download the new drawing. The value of this cloud surfing connection becomes apparent when employees no longer need to waste time in traffic or wait to get back to the office to discuss what has been done on a project. Direct data sharing to any project site is now instant and easy. Project data can flow in both directions. Meaning, both office staff and field crews have access to upload and download project related files. By having all project members use the same cloud-based project inbox, which serves as an instant backup as well. Because data is being shared instantly, results can be seen immediately. In the old days (only a few years ago), raw files were moved between the office and

field via whatever means were available at the time. Now there is a virtual pipeline of information exchange to and from project sites. Managers can leverage cloud-based company accounts as a project coordination tool. Within Magnet Enterprise, managers have an at-a-glance dashboard to instantly see all of the company’s projects intuitively plotted on top of a streaming satellite image background. Confidence is bolstered after quick verification of the fieldwork that has been done so far, as well as all the other jobs in process. The value of a private cloud-based company account can include the following: • Managers stay notified even while traveling • Private and instant intra-company chat messaging • Create and manage geo-referenced projects • Cloud surfing with no cost AutoCAD 360 service • Quick activity reports for field jobs • Ability to manage crews on multiple sites and visualize locations of all crews at any time

• Check weather forecasts • Verify time zone differences • Check project history to see if previous work has been completed nearby (a simple click on a project’s pushpin location on a map can reveal which project it was, client name, who worked on it, when it was completed, and the quality of results) • All of the above can save time and money Security Concerns For those who are new to the cloud and the services that are offered, there are generally two reactions: raised eyebrows acknowledging the impressiveness of cloud technology, followed quickly with concerns about the security. It is important to understand that access to a private cloud-based company account is only accomplished through a secure login. An employee’s e-mail and custom password functions as a fingerprint for gaining access, and access only to the specific project to which the employee has been assigned. Also, remember that the parallel benefit of cloud systems is that all data is redundantly located in many places.

The Near Future While the future is not set in stone, experts tend to agree on the following predictions for cloud-based computing: 1. In a short three years from now, no one will be talking about the cloud. It will have become the new normal. 2. There will in fact be many clouds and companies/users will be able to customize the personal cloud environment to precisely fit unique needs. There will not be cumbersome giant generic software applications intending to meet disparate needs of users all over the world. 3. In the future, the question that will be asked to qualify any software or services under consideration, “Is it cloud enabled and does it have the flexibility to meet our specific needs?” The future is closer than one might think. Now is the time. It’s time to put one’s “head in the clouds”. Oscar R. Cantú is a product marketing manager of software within Topcon Positioning Systems. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Gov. Dalrymple Addresses Crowd at Ribbon-Cutting Event ACCELERATION from page 40

Bobcat Company employees meet in one of the Acceleration Center’s team rooms.

Employees and guests gather outside for the grand opening of the new Acceleration Center.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 69

Howell Tractor 480 Blaine Street Gary, IN 46406 800/852-8816 Fax: 219/977-4220

Illinois Truck & Equipment www.iltruck.com 320 Briscoe Drive Morris, IL 60450 815/941-1900 Fax: 815/941-1486

Kelbe Brothers Equipment Co., Inc. www.kelbebros.com 12770 W. Silver Spring Drive Butler, WI 53007 262/373-2151 Fax: 262/373-2102 4621 Dutch Mill Rd Madison, WI 53716 608/221-8300 Fax: 608/221-0610 3101 French Rd. De Pere, WI 54115 920/343-6496 Fax: 262-781-9671

Grand Equipment Company Mid Country Machinery 3478 5th Ave South (Bus. Hwy 20) Fort Dodge, IA 50501 800/206-5936 4734 Sergeant Rd. (Hwy 63) Waterloo, IA 50701 319/234-8710 106 8th Street Sergeant Bluff, IA 51054 712/943-4470

Custom Truck & Equipment www.customtruckandequipment.com 7701 E. 24 Highway Kansas City, MO 64125 800/861-1065 816/241-4888 Fax: 816/241-8826 2121 Stephens Blvd Joplin, MO 64804 417/659-8969 Fax: 417/659-8871

www.grandequipment.com 3310 Hudson Trail Dr. Hudsonville, MI 49429 616/896-7700 Fax: 616/896-6700

Construction Machinery Company www.cmcky.com 2911 S. English Station Rd. Louisville, KY 40299 502/267-4020 866/901-2262 Fax: 502/261-9251 2235 Ragu Drive Owensboro, KY 42303 270/683-2000 877/683-2262 Fax: 270/683-3727 267 W. Jay Louden Rd. Carrollton, KY 41008 502/732-4661 Fax: 502/732-8355

Page 70 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

STAR EQUIPMENT LT D .

TOP NOTCH EQUIPMENT, INC.

STAR EQUIPMENT LTD. 1401 2ND AVENUE DES MOINES, IA 50314 (515) 283-2215 FAX: (515) 283-0295 (800) 369-2215

2625 W. AIRLINE HWY. WATERLOO, IA 50703 (319) 236-6830 FAX: (319) 236-6834 (800) 791-9249

2950 6TH STREET SW CEDAR RAPIDS, IA 52404 (319) 365-5139 FAX: (319) 365-6726 (800) 728-5139

WWW.STAREQUIP.COM

2100 E. LINCOLN WAY AMES, IA 50010 (515) 233-9500 FAX: (515) 233-9505 (866) 856-2312

5505 HIGHWAY 169 N. PLYMOUTH, MN 55442 (888) 824-6559 (763) 398-0079 FAX: (763) 551-7916 WWW.TOPNOTCHEQUIPMENT.COM

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 71

7355 East 30th St. Indianapolis, IN 46219 (317) 544-3411 Fax: (317) 544-3420 www.westsidetractorsales.com Bloomington, IN (812) 333-9677 Fax: (812) 333-9731

South Bend, IN (574) 232-1461 Fax: (574) 233-3324

4301 North Cliff Ave. Sioux Falls, SD 57104 (888) 753-8907 3801 North Deadwood Ave. Rapid City, SD 57702 (800) 658-3047 39288 133rd St. Aberdeen, SD 57401 (888) 484-6312 www.dieselmachinery.com

Fort Wayne, IN (260) 482-8576 Fax: (260) 483-4057 LaFayette, IN (765) 447-6933 Fax: (765) 448-9038

4100 Gardner Ave. Kansas City, MO 64120 (816) 241-9290 (816) 241-1738 www.vlpco.com Joplin (800) 878-8223 (417) 781-8222 Springfield (800) 955-2729 (417) 887-2729 Wichita (800) 878-3346 (316) 838-3346 Topeka (800) 878-4345 (785) 267-4345 Garden City (800) 511-1435 (620) 275-1996

2300 Cassens Drive Fenton, MO 63026 (636) 343-9970 www.lubyequipment.com

50 East Kingston Ave. Columbus, OH 43207 614-443-6541 www.columbusequipment.com

Cape Girardeau (573) 334-9937

Perrysburg (419) 872-7101

Springfield (217) 744-2233

Cincinnati (513) 771-3922

Quincy (217) 222-5454

Richfield (330) 659-6681

Caseyville (618) 397-9971

Cadiz (740) 942-8871 Dayton (937) 879-3154 Canton (330) 453-4521 Zanesville (740) 455-4036 Painesville (440) 352-0452 Piketon (740) 289-3757

Page 72 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

New Saint Peters Facility...

Sullair Expands Relationship With Brabazon Pump, Compressor & Vacuum Sullair, an industry leader on the forefront of compressed air solutions since 1965 is expanding its relationship with distributor Brabazon Pump, Compressor & Vacuum to service customers across the Midwest. As part of this expansion, Brabazon recently opened a new 15,000 sq.-ft. facility in Saint Peters, Mo., and the company plans to open an additional facility in Decatur, Ill., for the spring of 2015. Brabazon is the Midwest’s largest independent distributor of pumps, air compressors and vacuum equipment. In addition to selling Sullair air compressors, Brabazon provides design, engineering, installation and maintenance services that maximize reliability and uptime, while minimizing customers’ operating costs. Brabazon’s new facility will house a

wide inventory of Sullair air-compressors and OEM parts. Staffed by sales and service technicians, the new office will provide assembly and testing services, 24x7 customer support, and auditing services conducted by DOE-certified Compressed Air Systems AirMasters+ qualified specialists. “Brabazon and Sullair have worked together since 1985, and during these 29 years, we’ve expanded our relationship into new territories on three different occasions,” said Brabazon’s CEO Heath Brabazon. “We continue to work with Sullair because they’re genuinely interested in minimizing our customer’s operating costs, and that’s not always the case with other air compressor manufacturers. Sullair’s broad portfolio enables us to customize solutions that meet the exact needs of our customers, and the reliability of

Sullair’s technology is second-tonone.” “Brabazon’s team not only possesses the service and maintenance expertise needed to keep our mutual customers happy, but they also bring to the table an aggressive and successful approach to finding new business,” said Brent Mumford, Sullair VP and general manager, stationary compressors and aftermarket. “Brabazon is a perfect example for the type of partner we seek to work with, and we’re looking forward to expanding our efforts together in the Saint Louis area and throughout southern Illinois.” For more information, call 219/8795451 or visit www.sullair.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Officials Caution That Worker Shortages Likely to Get More Severe With Demand SPENDING from page 1 tion climbed 1.6 percent from June and 0.6 percent from July Public construction spending rose 3.0 percent from June 2013 but declined 1.5 percent year-to-date. to July and 2.1 percent year-over-year; nevertheless, public Association officials said the spending figures were welconstruction for the first seven months of 2014 combined come news for the industry, but cautioned that worker shortremained 0.1 percent below the total for the same period in ages are likely to get more severe as demand continues to 2013. expand. They noted that a survey the association conducted “The largest private nonresidential categories showed with SmartBrief found that 25 percent of responding firms robust year-over-year growth, as did report they have already both single- and multifamily housturned down projects ing,” Simonson said. “The dominant because of labor shortpublic segments — highway and edu- “As demand for construction ages while two-thirds say cational construction — also did well they are having a hard in July, though their performance has rebounds, many firms are finding time finding workers. been mixed year-to-date.” “As demand for conthat the pool of available workers The largest private nonresidential struction rebounds, many type, power construction — which is pretty shallow.” firms are finding that the includes oil and gas fields and pool of available workers Stephen E. Sandherr is pretty shallow,” said pipelines as well as electric power — Associated General Contractors of America soared 7.5 percent in July and 29 perStephen E. Sandherr, the cent from a year earlier, Simonson association’s chief execunoted. Manufacturing construction tive officer. “Retiring jumped 4.4 percent and 25 percent, respectively. Single-fam- older workers, strong demand in other sectors of the econoily home construction gained 0.5 percent and 9.4 percent, my and few younger people seeking careers in construction while multifamily spending rose 0.2 percent and 41 percent. are combining to create workforce shortages for many conHighway and street construction was up 6.9 percent for the struction firms.” month, 3.0 percent year-over-year and 3.1 percent for the (This story also can be found on Construction Equipment first seven months combined. Public educational construc- Guide’s Web site at www.constructionequipmentguide.com.)

CONTINENTAL EQUIPMENT CORP. A division of AIS www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000 Fax: 517/321-4191

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 502/499-3195 Fax Evansville, IN 812/425-4491 812/425-1171 Fax Corbin, KY 606/528-3700 606/528-9014 Fax Lexington, KY 859/259-3456 859/254-0783 Fax Stanville, KY 606/478-9201 606/478-9208 Fax Paducah, KY 270/444-8390 270/575-4907 Fax Indianapolis, IN 317/872-8410 317/872-8417 Fax Ft.Wayne, IN 260/489-4551 260/489-1620 Fax

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. 1001 S. 7th St. Trafficway Kansas City, KS 66105 913/371-3822 913/371-3870 Fax Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 73

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 906/786-5813 Fax Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 920/532-0526 Fax DeForest, WI 608/842-4151 608/842-4193 Fax Eau Claire, WI 715/874-5400 715/874-5401 Fax Franksville, WI 262/835-2710 262/835-2844 Fax Schofield, WI 715/355-9898 715/241-0044 Fax

GENERAL EQUIPMENT & SUPPLIES www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 701/364-2190 Fax 905 20th Avenue SE Minot ND, 58701 800/825-0479 3500 Apple Creek Road Bismarck, ND 58504 800/279-4437 4082 2nd Ave. W Williston, ND 58801 701/572-0570

Page 74 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

N.Y. Leads Country in Efforts to Include Women in Industry WOMEN from page 1

degree? Reasons include a dearth of recruitment efforts aimed at women and hard-toquash stereotypes that construction work doesn’t suit them. Another factor, according to a recent report by the National Women’s Law Center, is pervasive denigration and sexual harassment of women at work sites. “It’s not surprising that the construction trades are sometimes called ‘the industry that time forgot,’’’ said Fatima Goss Graves, the center’s vice president of education and employment. “It’s time for this industry to enter the modern era — to expand apprenticeships and training opportunities for women, hire qualified female workers and enforce a zero tolerance policy against sexual harassment.’’ Efforts to accomplish those goals are more advanced in New York than in many parts of the country, with pledges by unions, employers and city officials to boost women’s share of construction jobs. One key player is Nontraditional Employment for Women, a nonprofit which for three decades has been offering training programs such as the one taken by Janice Moreno. Known as NEW, the organization has arrangements with several unions to take women directly into their multiyear apprenticeships — at a starting wage of around $17, plus benefits — once they complete the training. After four or five years, they can attain journeyman status, with hourly pay of $40 or more. Kathleen Culhane, NEW’s interim president, said more than 1,000 graduates of the program have obtained apprenticeships since 2005, and women now comprise 12 to 15 percent of the apprentices with leading laborers’ and carpenters’ unions in the city. Due to support from foundations, employers and government contracts, NEW covers all costs for the women taking its programs, including transit fares to and from the headquarters in Manhattan. Students must have high school or GED diplomas and be able to carry 50-pound loads. On a recent class day, Moreno and about 20 other students were learning carpentry techniques from 67-year-old Howie Rotz, who’s been teaching since retiring eight years ago from a carpentry career. “Women have a good work ethic,’’ he said. “They’re very serious.’’ Another instructor, Kathleen Klohe, worked as a roofer and a unionized carpenter before joining NEW after the recession hit in 2008. “Did I come across sex discrimination? Once or twice,’’ she said. “A few times, I got the sense that I was not wanted, but I kept on. I knew what I was doing.’’ She encourages her students’ interest in

“The biggest issue is getting through to the parents of the kids, the counselors at the schools and making clear that construction is a viable career.’’ Holley Thomas KBR Inc.

construction, while advising that it requires “a certain mental strength.’’ Beyond learning job skills, NEW students do role-playing to get ready for challenges in dealing with future co-workers. Among the topics, Moreno said, is how to distinguish between flagrant sexual harassment that should be reported, as opposed to less egregious behavior that perhaps should be endured. “They want us to be prepared for the possibility we won’t be liked, or we’ll be the only woman on the job,’’ Moreno said. “If you complain too quickly, your job can be at risk.’’ One of NEW’s union partners is Laborers Local 79. Its business manager, Mike Prohaska, said the local had about 220 women at last count — 3.1 percent of the roughly 7,000 active members. Of its current apprentices, about 12 percent are women. “The women by and large are very well accepted,’’ Prohaska said. “To survive, they have to toe the line... As long as they’re real workers, nobody minds having them.’’ If young women considering a construction career are in search of a role model, Holley Thomas might fit the bill. She took up welding at a community college in Alabama, landed a job in 2009 with construction giant KBR Inc., and in 2010 became the first woman to take first place in welding at the Associated Builders and Contractors’ National Craft Championships — a competition dating back to 1987. Thomas has worked her way up to foreman and is supervising a 10-worker welding crew at a KBR project in West Palm Beach, Fla. She speaks occasionally to high school girls, who are impressed by her paycheck that averages more than $2,000 a week and what she calls “my toys’’ — a HarleyDavidson, a Mustang and a Jeep Wrangler. Thomas knows that harassment exists within the construction industry, but said she’s experienced none of it at KBR. She’s impressed by the efforts of some companies to recruit more women and minorities, though the pace of change is slower than she’d like. “The biggest issue is getting through to the parents of the kids, the counselors at the schools and making clear that construction is

a viable career,’’ she said. From an older generation, Mary Battle also has succeeded with a construction career, although she said it required unwavering tough-mindedness. Now 50, Battle has been working in cement masonry for 30 years and in 2012 became the first woman elected as business manager of Plasterers and Cement Masons Local 891 in Washington, D.C. Under her leadership, the number of women in the local has risen from five to 12, but she doesn’t believe that most construction unions nationwide are committed to boosting the ranks of women.

“No matter how much negativity you get, keep on the job and don’t quit — that’s my motto.’’ Mary Battle Plasterers and Cement Masons Local 891

“Men don’t perceive of women as someone coming to work, they perceive of women as a sex object,’’ Battle said. “I set rules from the beginning: ‘Don’t touch me.’ You have to be prepared to set a man in his place.’’ For younger women considering a construction career, Battle tells them: “The job is not physically hard, it’s mentally hard.’’ “No matter how much negativity you get, keep on the job and don’t quit — that’s my motto,’’ she said. Battle, a mother of six, credits a devoted baby-sitter with helping her cope with the long hours she sometimes faced as a mason. Many construction jobs start in early morning, and it can be crucial for mothers in the workforce — especially single moms — to arrange for early-morning child care. Mothers also can find it difficult to accept temporary jobs requiring lengthy travel from

their homes. Another challenge, for women who complete apprenticeships, is to get assigned their fair share of working hours. It’s a problem severe enough to drive some women out of the field, according to Elly Spicer, who worked for 11 years as a carpenter and now is director of training at a technical college affiliated with New York City carpenters unions. “You’ll find, unquestionably, that women get access to less hours than men, even though they get same wages and benefits,’’ said Spicer. “You can’t do this working six months of the year.’’ Spicer said she was mostly treated with respect during her carpentry career in the 1980s and ’90s, but she knew of other women who quit because of constant pressure to prove themselves. “Every crew was different,’’ she said. “You could have an enlightened foreman, while another might be patronizing. You still find that variation today — good old sexism still rears its ugly head sometimes.’’ At the highest level, the management side of the construction industry insists it would welcome more women. “Most of our members are desperate to hire people,’’ said Brian Turmail, public affairs director of the Associated General Contractors of America. “They’re looking for any candidate who’s qualified to come and join the team — women, minorities, veterans.’’ Turmail suggested that most women aren’t tempted by construction careers, while those who are interested might be hampered by a nationwide cutback in school-based vocational programs. “It’s not a question of folks not wanting women — it’s women not wanting to work in construction,’’ he said. “We would love to see the numbers change. It’s the right thing to do and we really need the people.’’ Turmail’s association, and many of its chapters across the country, are undertaking educational campaigns and recruiting programs aimed at diversifying the construction workforce. Similar initiatives are being pushed by the National Center for Construction Education and Research, which assists employers with workforce development programs. Jennifer Wilkerson, the center’s marketing director, said the best recruiters of women are other women who’ve already succeeded in the field. They can speak in detail about the many construction specialties — such as welding and crane-operating — that women can master. “A lot of times, we think of heavy lifting — the labor side of it — but that doesn’t represent the full spectrum of jobs,’’ said see WOMEN page 109

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 75

RTL Equipment Inc. (RT-T-HC/CC-AT) www.rtlequipment.com 3000 SE Gateway Drive Grimes, IA 50111 515-986-0262 Fax: 515-986-0267 2601 120th St. NW Swisher, IA 52338 319-857-4045 Fax: 928-441-1269

WHATEVER YOUR APPLICATION, THERE’S A PERFECT TEREX CRANE. With over 100 years of experience and a commitment to speed, Terex Cranes focuses on getting the job done, aiming at maximum uptime and a high return on investment. Because your results are what really matters.

Custom Truck & Equipment (RT-T-HC/CC-AT-BT) 7701 Highway 24 Kansas City, MO 64125 800-861-1065 www.cte-equipment.com

All Erection & Crane Rental Corp. (RT-T-HC/CC-AT-BT-Towers) 4700 Acorn Dr. Independence, OH 44131 800-232-4100 Fax: 216-642-7633 www.allcrane.com

BRANCH LOCATIONS All Crane Rental of PA, LLC Pennsylvania 412-382-4200 All Crane & Equipment Rental Corp. West Virginia 304-766-0300 Dawes Rigging & Crane Rental, Inc. Wisconsin 414-453-5335

Contact our distributors and find out how we can help to improve your bottom line.

Terex is a registered trademark of Terex Corporation in the United States of America and many other Countries.

Jeffers Crane Service, Inc. Michigan 419-693-0421

For Your Local Terex Dealer, Please Contact: Terex USA, LLC 106 12th St. SE Waverly, IA 50677 USA Phone: (319) 352-3920 Fax: (319) 352-9395 email: info.cranes@terex.com web: www.terex.com/cranes

Page 76 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NEW

Burris Equipment Co. 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 Fax 847/336-2697 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 Fax 815/363-4109

2001 Cherry Hill Rd. Joliet, IL 60433 815/464-6650 Fax 815/464-6951

1st Choice Equipment LLC 124 N. Schmale Rd. Carol Stream, IL 60188 630/510-6050 Fax 630/510-6051 1305 Sentry Drive Waukesha, WI 53186 262/521-5802 Fax 262/521-5801

Birkey’s Construction Equipment 2202 S. High Cross Road Urbana, IL 61802 800/798-1772 Fax: 217/337-1775

2900 E. Jackson St. Macomb, IL 61455 888/360-9225 200 North St. Prophetstown, IL 61277 877/221-0881

Lano Equipment, Inc. Anoka, MN 888/448-5266 753/323-1720 Shakopee, MN 877/753-6100 952/445-6310

Corcoran, MN 888/479-4342 763/479-8200

ABC Equipment 29 Pearl Rd. Brunswick, OH 44212 888/572-3888 Fax: 330/220-4949 3825 Chester Rd. Avon, OH 44011 440/934-7368 www.abcequipment.com

Southeastern Equipment Co., Inc. 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260/483-8868 4951 West 96th Street Indianapolis, IN 46268 317/872-4877 www.southeasternequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 77

Portable Power WE DO MORE THAN DESIGN EQUIPMENT.

WE POWER YOUR SUCCESS. Whether you are looking for products with the latest technology or you want to have your old machine remanufactured, Doosan Portable Power can help you acheive success. Focused on customer satisfaction and product solutions, our dealer network is the largest nationwide network in the industry. Contact your

local dealer today. Aspen Equipment Co.

McAllister Equipment Co.

9150 Pillsbury Ave. S Bloomington, MN 55420 (952) 888-2525

150 E. North Ave. Villa Park, IL 60181 (630) 530-7600 Alsip/Chicago, IL (708) 389-7700 E. Peoria, IL (309) 694-4455 Rockford, IL (815) 227-0555 Springfield, IL (217) 789-0351

Find Us on

Roland Machinery Co. 4670 Crossroads Industrial Drive Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252 Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Carterville, IL (618) 985-3399 DePere, WI (920) 532-0165 DeForest, WI (608) 842-4151 Eau Claire, WI (715) 874-5400 Franksville, WI (262) 835-2710 Schofield, WI (715) 355-9898 Escanaba, MI (906) 786-6920

800.633.5206

Central Power Systems & Services 9200 Liberty Drive Liberty, MO 60468 (816) 781-8070 Springfield, MO (417) 865-0505 Wichita, KS (316) 943-1231 Great Bend, KS (620) 792-1361 Liberal, KS (620) 624-7274 Salina, KS (785) 825-8291 Colby, KS (785) 462-8211

DoosanPortablePower.com

Page 78 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Span Lengths Vary Widely Over Rail Lines, Levee, Streets BRIDGE from page 1

forced concrete edge girder superstructure on the main span. The two-lane structure will provide two 12-ft. (3.7 m) driving lanes and two 4 ft. (1.2 m) shoulders for a total width of 32 ft. (9.7 m). ODOT awarded the contract, valued at $81.3 million, to Brayman Construction Corporation of Saxonburg, Pa., in January 2012. Brayman’s onsite project manager is Tom Hesmond, and ODOT’s area field engineer is Dave Bame. The project started on March 5, 2012, and is anticipated to be completed in early spring of 2016. According to Kathleen Fuller, public information officer of ODOT, the original interim

completion date (when the bridge will be open to traffic) was targeted for midto late-fall of 2015. Final completion for the entire project, which includes demolition of the existing bridge, will follow after the new bridge is open. The main span unit consists of three spans; two flanking spans at 370 ft. (112 m) each and the center span of 900 ft. The main span will be supported by two cast-in-place 316-ft. (96 m) tall delta-shaped towers, founded on large diameter drilled shafts with rock sockets. Span lengths for the approaches vary widely since they cross numerous rail lines, the Ohio River levee, and city streets. On the Kentucky side, the see BRIDGE page 108

Crews in Ohio are currently working on a bridge with the longest span that the Ohio Department of Transportation (ODOT) has ever constructed — a total of 900 ft. (274 m).

“There are always challenges when constructing a project of this magnitude, and they can be especially great when constructing over a sizeable river crossing like the Ohio River.” Kathleen Fuller ODOT

The project started on March 5, 2012, and is anticipated to be completed in early spring of 2016.

The navigational clearance for the bridge will be 805 ft. (245 m).

Span lengths for the approaches vary widely since they cross numerous rail lines, the Ohio River levee, and city streets.

The main span unit consists of three spans; two flanking spans at 370 ft. (112 m) each and the center span of 900 ft. (274 m).

Pages 79-95

Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

NDA Adds New Voice to Global Atlas Copco Marks 30th Disaster Response Conference Anniversary of Dino Emergency management experts from around the world met at Purdue University recently to debate best practices for life-saving response and recovery operations after natural or man-made catastrophes, opening the dialogue for the first time this year to include industry experts. The setting was the 10th International Conference of the International Institute for Infrastructure Resilience and Reconstruction, known in the emergency management community as “I3R2.” This year, the National Demolition Association (NDA) contributed a new Emergency management experts from around the world voice to the conference, promoting the met to debate best practices for life-saving response and value of public/private collaboration in recovery operations after natural or man-made catasthese efforts. Thomas Stahr, chairman trophes, opening the dialogue for the first time this year of the NDA disaster response commit- to include industry experts. tee and Mark Shaurette and Randy Rapp of Purdue’s department of building construc- Management Society. “Our members have played an important role tion management presented a paper entitled “First Responder/Private Industry Collaboration to following such disasters as the 1994 Northridge and 1989 Loma Prieta California earthquakes, the Advance Disaster Response.” As part of its mission, the NDA is dedicated to attacks on 9/11, the 2010 Haiti earthquake, and the collaborating with First Responders, emergency disastrous 2013 Colorado floods,” said Michael R. management organizations and government agen- Taylor, NDA executive director. “Besides possesscies to help improve the effectiveness of response ing fleets of highly specialized equipment and attachments, most of our members have HAZefforts. “We’re working to educate these audiences WOPER-trained labor forces who are experienced about the resources and skills possessed by demo- working with unstable structures and disposing of lition and disaster response companies that could hazardous materials. They also know how to move be made available for widespread disaster large amounts of debris with the finesse often needresponse,” said Stahr, a consultant with ed in search and rescue operations.” The NDA offers First Responders and emerEnvironmental Resources Management (ERM). “From our work at past disaster sites, we know we gency management organizations and the governcan help facilitate faster response and save lives.” ment agencies that control them with the resources Stahr and former NDA Health and Safety they need to identify the characteristics and capaCommittee chair Jerry Myrick, also with ERM, bilities of a qualified demolition contractor. “The message we’re promoting is that it’s participated in an industry panel on best practices at I3R2. The roundtable included representatives important to pre-qualify supporting members of an from the Restoration Industry Association and the emergency management team now, before the next U.S. volunteer recovery sector. Other participating disaster hits,” said Stahr. For more information, visit www.demolitionasorganizations in the three-day event included the U.S. Army Corps of Engineers, the Haiti sociation.com/disasterresponse. (This story also can be found on Construction Reconstruction Fund, the Center for Disease Control and Prevention, the Society of Military Equipment Guide’s Web site at www.construcEngineers and the International Emergency tionequipmentguide.com.)

It’s not clear how the The research unnamed dinosaur group’s equipment died 100 to 120 million included Atlas years ago, but it’s been Copco rock drills, only 30 since he finally pneumatic tools and encountered a predator compressors. The he couldn’t outrun: digging teams often Atlas Copco equipworked in dark, narment. row tunnels, which “Not every compaat times were muddy ny has a dinosaur and slippery. The species named after it,” excavation site was said Sofie Gielen, Atlas located next to a Copco’s marketing Atlascopcosaurus was steep cliff overlookcommunications direc- discovered in 1984 and ing the sea, which tor, in commemorating named in honor of Atlas complicated work the 30th anniversary of Copco’s support of arche- even further. The the discovery of ological research. fossils they were Atlascopcosaurus. after were embedded “Three decades later, we’re still in layers of sand, mud and clay that extremely proud of the fact that our had been pressed together into hard equipment helped unearth the fos- rock for millions of years. It was slow silized skeleton of Atlascopcosaurus going, with the teams removing so it could be shared with the entire approximately 66 lbs. of hard rock for world.” every 2 lbs. of dinosaur bone. Atlascopcosaurus was an estimated Ultimately, the excavation revealed 6.5- to 13-ft. long and weighed 276 Atlascopcosaurus loadsi. The specific lbs. The dinosaur belonged to the name loadsi refers to Bill Loads, Atlas Hypsilophodontidae family and lived Copco’s manager in Victoria who during the early Cretaceous Period. made the decision to support the projScientists infer that it was a small, ect. bipedal herbivore that would have When Rich and Vickers-Rich foraged for its food and stayed out of named the fossil in 1989, they looked the way of larger, carnivorous preda- to the company whose equipment and tors. expert assistance was so instrumental Thomas H. Rich, a paleontologist in the success of the dig. Rich said he from the Museum of Victoria, was grateful for the support Atlas Australia, and Patricia Vickers-Rich Copco provided and impressed with from Monash University, Melbourne, the reliability of the equipment. discovered Atlascopcosaurus at “It was because of that record of Dinosaur Cove, a fossil-rich area on reliability that, in 2007, I insisted on the southeast coast of Australia, close using Atlas Copco equipment during to Victoria. During Rich’s first visit to a dinosaur excavation from perthe area in 1980, he and two col- mafrost in a tunnel on the North Slope leagues revealed fragments of rock- of Alaska.” embedded bone. Four years later, a (This story also can be found on group of hundreds of student volun- Construction Equipment Guide’s Web teers, paleontology scientists and min- site at www.constructionequipmenters began excavations. guide.com.)

Page 80 • September 13, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 7910 Highway 2W Devils Lake, ND 58301 701-665-3800 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 3402 36th St. SW Fargo, ND 58104 701-280-3100 800-726-7475

1201 S. 46th St. Grand Forks, ND 58201 701-775-4238 17040 Hwy 11 Hankinson, ND 58041 701-242-7474 7695 Highway 18 S. Hoople, ND 58243 701-894-6363 1910 27th Ave SE Jamestown, ND 58401 701-251-1400 1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508

4950 E. Highway 12 Aberdeen, SD 57401 605-225-6240 1715 US Hwy 14 W. Huron, SD 57350 605-353-1200 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

www.fabco.com

LaCrosse, WI 608-783-4891 Eau Claire, WI 715-874-5100 Wausau, WI 715-359-6220

Green Bay, WI 920-498-8000 Superior, WI 715-398-9696 Marquette, MI 906-475-4191

Jefferson City, MO 800-845-9177 Springfield, MO 888-959-2100 Joplin, MO 866-313-1748 Willow Springs, MO 866-628-1717 Cape Girardeau, MO 800-845-9175

Marion, IL 800-845-9179 Metropolis, IL 866-299-6044 Salem, IL 800-845-9176 Troy, IL 866-345-5681 Mt. Carmel, IL 888-769-7247

11200 W. Silver Spring Rd. Milwaukee, WI 53225 414-461-9100 Fax: 414-461-8899 Madison, WI 608-271-6200

The Aggresand 165 was introduced to the world of washing last year and 2014 sees the official launch of the larger Aggresand 206 (up to 400 tph) and the Aggrescrub 150.

Terex Washing Systems Continues to Expand Presence in North America

www.fabickcat.com One Fabick Drive Fenton, MO 64026 800-845-9188 Foristell, MO 800-539-9217 Columbia, MO 800-791-5401

www.zieglercat.com

Terex Washing Systems (TWS) has launched a dedicated Centre of Excellence (COE) in Louisville, Ky. Following the appointment of a regional sales and distributor manager last year, coupled with the official launch of the award winning AggreSand 165 in November 2013, demand and inquiries for TWS equipment has reached unprecedented levels. To facilitate this growth and ensure a full and dedicated line of support for the TWS distributor network and customers, TWS will now support all machines sales, part sales and service directly from its facility in Louisville, Ky. TWS Director, Sean Loughran said, “With the fantastic levels of growth we are witnessing across America both in the aggregates and recycling segments, establishing a dedicated location in North America to stock machines and parts and to manage our sales and service activity in this region was critical to ensure we continue to provide optimum service and support for our distribution network and end-users. With this facility now fully operational we can react quickly to market demands with onsite stock of TWS most popular machines. In addition, we have a dedicated parts warehouse stocking hundreds of parts to ensure minimal downtime and ultimately ensure our customers operate at maximum productivity. TWS has a team of aftersales technicians available to support our customers and distributors in all areas including applications; service and commissioning to ensure TWS continues to be the number one supplier of choice for all washing equipment in North America. ” TWS has the largest distributor network in North America with 23 Independent dealers covering Canada, the United States, Mexico, The Caribbean and all of Central America. Within the dedicated distributor network TWS has more than 100 salesmen serving customers across the continent from Alaska to Panama and Newfoundland to Hawaii. Distributor team members have extensive knowledge, expertise and service capabilities in washing solutions,

which is supported by the TWS dedicated engineering and aftersales technicians. The North American washing market primarily concentrates on serving the sand and gravel and mining industry. TWS can provide an expansive product portfolio of washing equipment to include the latest innovative modular washplants, sand wash and fines recovery plants, log washers, hoppers, feeders, conveyors, dewatering screens, static screens, mobile, static and modular rinsers, as well as speciality washing equipment and water management systems. Focusing on the future, TWS is confident that the water treatment and management systems it offers will lead the way in water recycling and pond management, according to the company. The Aggresand 165 was introduced to the world of washing last year and 2014 sees the official launch of the larger Aggresand 206 (up to 400 tph) and the Aggrescrub 150, both to be officially launched at Hillhead, UK, in June 2014. Andrew Pickering, sales manager in the United States said “Developing our business in the USA market place has been extremely exciting. I have witnessed at first hand a dramatic positive shift in activity in the marketplace. The recent launch of the Aggresand 165 in North Carolina paved the way for helping establish TWS as a market leader. 2014 presents exciting opportunities for TWS to continue to expand and maximize on the massive potential that is here. TWS has a solid product portfolio, particularly with the latest new innovative solutions introduced, as well as two new products to be launched in June. TWS looks forward to working with customers to solve their washing problems, add value to their business and provide effective and efficient solutions.” For more information, visit www.terex.com/washing. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

MINNESOTA BEMIDJI* 5426 Hwy 71 North Bemidji, MN 56601 877-829-9850 BRAINERD 3311 Liberty Lane Brainerd, MN 56401 218-829-9800 BUHL 10081 East Hwy 169 Buhl, MN 55713 218-258-3232 COLUMBUS 13822 West Freeway Drive Columbus, MN 55038-9705 651-982-5600 CROOKSTON 720 3rd Ave SW Crookston, MN 56716-0538 218-281-4245 DULUTH 210 Garfield Ave. Duluth, MN 55802-2696 218-722-6628 FERGUS FALLS 3502 State Hwy 210 West Fergus Falls, MN 56537-4003 218-736-2680 JACKSON 191 Industrial Parkway Jackson, MN 56143 866-847-6401 MANKATO 2145 Howard Drive West Mankato, MN 56003 507-388-1444 MARSHALL 1200 North Hwy 59 Marshall, MN 56258-2761 507-532-4403 MINNEAPOLIS 901 West 94th Street Minneapolis, MN 55420-4236 952-888-4121 ROCHESTER 6340 Hwy 63 South Rochester, MN 55904-8414 507-285-1775

SHAKOPEE 8000 County Road 101 East Shakopee, MN 55379 800-352-2812 ST. CLOUD 2225 255TH Street St. Cloud, MN 56301-8742 320-253-2234 IOWA ALTOONA 1500 Ziegler Drive NW Altoona, IA 50009-7200 515-957-3800 PARTS EXPRESS 515-957-3843 800-752-0856 ZIEGLER RENTAL 1600 Ziegler Drive NW Altoona, IA 50009-7200 515-957-3828 888-270-6258 Fax: 515-957-3881 ATLANTIC 951 Park Drive Atlantic, IA 50022 712-243-1039 877-547-3819 FORT DODGE 3366 5TH Ave. South Fort Dodge, IA 50501-6428 515-576-3161 800-342-1848 MASON CITY 11490 265TH Street Mason City, IA 50401-9656 641-423-7240 800-342-1849 POSTVILLE 308 North Lawler Postville, IA 52162-7802 563-864-7461 800-526-0889 SHELDON 102 Crossroads Drive Sheldon, IA 51201 712-324-5604 855-344-5604 SIOUX CITY 5300 Harbor Drive Sioux City, IA 51111-1114 712-252-4401 800-342-1847

*Parts and rental only

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • September 13, 2014 • Page 81

www.whayne.com 1400 Cecil Ave Louisville, KY 502-774-4441 Ashland, KY 606-928-3444 Bowling Green, KY 270-843-3275 Corbin, KY 606-528-3140 Dry Ridge, KY 859-823-1500

www.altorfer.com 2600 6th Street S.W. Cedar Rapids, IA 52404 319-365-0551 Fax: 319-365-5639 4712 Buckeye St. Davenport, IA 52802 563-324-1935 Fax: 563-324-2409 #1 Capitol Dr. East Peoria, IL 61611 304-694-1234 Fax: 309-694-4148

Evansville, IN 812-425-4651 Hazard, KY 606-439-4040 Lexington, KY 859-254-2756 Paducah, KY 270-443-3631 Pikeville, KY 606-437-6265

4200 Rodger Street Springfield, IL 62705 217-529-5541 Fax: 217-529-0020 1519 W. Kenyon Rd. Urbana, IL 61801 217-539-1671 Fax: 217-359-6310 3520 Moberly Ave. Hannibal, MO 63401 573-221-8600 Fax: 573-221-7187 701 Highway 24W Moberly, MO 65270 660-263-8200 Fax: 660-263-8203

Committed

www.macallister.com 7515 East 30th St. Indianapolis, IN 46219 800-382-1896 Fort Wayne, IN 800-944-0847 South Bend 800-685-9849 Lafayette, IN 800-283-4231 Washington, IN 800-932-5120 Terre Haute, IN 800-273-5650

www.ohiocat.com Cleveland, OH 440-526-6200 800-837-6200 Fax: 440-526-9513 Cadiz, OH 740-942-4626 800-837-6204 Fax: 740-942-4029 Canton, OH 330-478-6525 800-837-6207 Fax: 330-478-6529 Cincinnati, OH 513-771-0515 888-332-4658 Fax: 513-672-7658 Columbus, OH 614-878-2287 888-441-4658 Fax: 614-851-5015

Toledo, (Perrysburg) OH 419-874-7975 888-339-4658 Fax: 419-873-8255 Troy, OH 937-335-7660 888-330-4658 Fax: 937-335-6447 Youngstown, OH 330-530-9010 800-837-6203 Fax: 330-530-9102 Zanesville, OH 740-453-0563 800-837-6205 Fax: 740-452-3605 Richwood, KY 859-372-4665 888-446-4658 Fax: 859-372-4659

Cat.com © 2014 Caterpillar • All Rights Reserved • Printed in USA CAT, CA CA ATERPILLAR, TERPILLAR, BUIL BUILLTT FOR FORITITT,, their theirresp respective logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as corporate and andproduct productidentity identity used used herein, herein, areare trademarks trademarks of Caterpillar of Caterpillar and may andnot may benot used bewithout used without permission. permission.

Page 82 • September 13, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

CRUSHING

MATERIAL HANDLING

SCREENING

TRACKS

WASHING & CLASSIFYING

Integrity. Generation After Generation.

www.rmsequipment.com q p

After being in business for almost a century, we’ve learned a thing or two. We know what it takes to keep your operation running smoothly: Commitment from your crew, quality equipment that works as hard as you do, and people that you can count on. Generation after generation, we continue to meet the demands of the job by building innovative products. We’ve led the way since 1928, and that leadership shows through in the integrity of our team. We’re proud to still be doing business the way we did back then.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • September 13, 2014 • Page 83

Right where you need us.

Lokotrack® LT106™ Setting standards in mobility The Lokotrack LT106 mobile jaw meets the demand for a compact plant with optimal transport dimensions and agile performance. A new hydraulic system, coupled with an environmentally friendly, low-emission engine and high inertia flywheels, delivers excellent fuel efficiency without compromising power or productivity. For more information, contact your local Metso distributor today www.metso.com/lokotrack

BUTLER MACHINERY CO. www.butlermachinery.com 3402 36th St. SW Fargo, ND 58014 701-280-3100 800-726-7475 3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. 46 St. Grand Forks, ND 58201 701-775-4238 th

1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508

4950 E Highway 12 Aberdeen SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

RB SCOTT COMPANY INC. www.rbscott.com 1011 Short St. Eau Claire, WI 54701 715-832-9792 Fax: 715-832-7767

CENTRAL SERVICE & SUPPLY, INC. www.centralsands.com 4219 E. 50th St. Des Moines, IA 50317 800-247-2400 515-964-8600 Fax: 515-309-0667

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuilders machinery.com 1001 S. 7th St. Trafficway Kansas City, KS 66105 913-371-3822 Fax: 913-371-3870 4115 S. 90th St. Omaha, NE 402-331-9200 5601 Fletcher Ave. Lincoln, NE 402-325-0447 4949 Juergen Rd. Grand Island, NE 308-384-2620

AIS CONSTRUCTION EQUIPMENT CORP. 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Fax: 517-321-4191 www.aisequip.com

Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583

Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449

Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257

Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311

West Detroit, MI 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

Page 84 • September 13, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Rayco RG35 Super Jr. Now L L I H E H T F O G N I K Available With 4-Wheel Drive www.superior-ind.com

At Superior, we’re constantly searching for new ways to use our knowledge of bulk material handling systems to solve challenges and improve production. We’re driven by curiosity, loaded with determination and energized by progress. How can we help you?

Proud partners of General Equipment & Supplies

Fargo, ND

Bismarck, ND

Minot, ND

4300 Main Ave. Fargo, ND 58103 800-437-2924 Local: 701-282-2662 Fax: 701-364-2190

3500 Apple Creek Road Bismarck, ND 58504 800-279-4437 Local: 701-223-9700 Fax: 701-223-4815

905 20th Ave. SE Minot, ND 58701 800-825-0479 Local: 701-852-0479 Fax: 701-852-1451

Sioux Falls, SD

Shakopee, MN

Williston, ND

3902 N Jessica Ave. Sioux Falls, SD 57104 Local: 605-336-9000 Fax: 605-336-0073

4600 Valley Industrial Blvd S Shakopee, MN 55379 800-966-1455 Local: 952-224-1500 Fax: 952-224-1570

4082 2nd Ave. W. Williston, ND 58801 Local: 701-572-0570 Fax: 701-572-0510

Official dealer partner of Superior Industries in North Dakota, South Dakota, Minnesota, Iowa & Nebraska

Rayco’s RG35 Super Jr is now available with 4-wheel drive. The 4x4 option is available as an option on new machines and as a retro-fit kit for older RG35 Super Jr’s. All RG35’s feature a 35 hp Vanguard engine and swing-out controls that offer better visibility while cutting and swing in-line for travel through gates. Other features include wide, bar-tread floatation tires, hydraulic backfill blade, and a 51-in. (130 cm) cutting width. For more information, call 800/392-2686 or visit www.raycomfg.com.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • September 13, 2014 • Page 85

THE LEADER IN TECHNOLOGY: THE NEW MC 110 EVO

MC 110 Zi EVO Continuous Feed System

MC 110 Ri EVO High-tech jaw crusher

Direct drive via fluid clutch

High production, quality product with maximum efficiency, the all new Kleemann EVO jaw crusher.

ROAD AND MINERAL TECHNOLOGIES

Shepherdsville, Kentucky P.O. Box 6588 335 Saltwell Drive Shepherdsville, KY 40165 Toll Free: 877-538-3221 Phone: 502-543-3746 Fax: 502-543-3716

Evansville, Indiana Fort Wayne, Indiana Indianapolis, Indiana Corbin, Kentucky Lexington, Kentucky Louisville, Kentucky Paducah, Kentucky Stanville, Kentucky

www.wirtgenamerica.com Carterville, Illinois 1505 Donna Drive Carterville, IL 62918 Phone: 618-985-3399

Escanaba, Michigan 2600 S Lincoln Road Escanaba, MI 49829 Phone: 906-786-6920

Eau Claire, Wisconsin 7417 Margaret Lane Eau Claire, WI 54703 Phone: 715-874-5400

Springfield, Illinois 816 N Dirksen Parkway Springfield, IL 62702 Phone: 217-789-7711

Marengo, Illinois 18210 Beck Road Marengo, IL 60152 Phone: 815-923-4966

DeForest, Wisconsin 604 Stokely Road DeForest, WI 53532 Phone: 608-842-4151

Franksville, Wisconsin 2916 N Sylvania Ave Franksville, WI 53126 Phone: 262-835-2710

Bolingbrook, Illinois 220 East Frontage Road Bolingbrook, IL 60440 Phone: 630-739-7474

Portage, Indiana 6550 Melton Road Portage, IN 46368 Phone: 219-764-8080

DePere, Wisconsin 3275 French Road DePere, WI 54115 Phone: 920-532-0165

Schofield, Wisconsin 9808 Weston Avenue Schofield, WI 54476 Phone: 715-355-9898

Bridgeton, Missouri 4670 Crossroads Industrial Dr. Bridgeton, MO 63044 Phone: 314-291-1330 Cape Girardeau, Missouri 3364 Percy Drive Cape Girardeau, MO 63702 Phone: 573-334-5252

Columbia, Missouri 4110 I-70 Drive SE Columbia, MO 65201 Phone: 573-814-0083 Palmyra, Missouri 701 Industrial Drive Palmyra, MO 63461 Phone: 573-769-2056

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 800-352-2757

Page 86 • September 13, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

GET A HANDLE ON OPERATING COSTS Penn Jersey Mac hinery

TTerex erex® Fuc Fuchs hs Ma Material terial Handlers

Purpose-built for your scrap yard, transfer station or mill yard, Terex® Fuchs material handlers help you get a handle on your business with: Ê Ê

Ê Ê

Ê Ê Ê

An average 11% reduced fuel consumption versus competitive material handlers An average 45% lower cost of ownership at 1000 hrs versus titi t i l h dl

Deptford, NJ 856-227-6400

Chadwick-Baross Chelmsford, MA 800-804-0775

htown, NJ COMPANY WRENCHBangor , M EEQUIPMENT Frenc SARGENTS EQUIPMENT LUBY www.companywrench.com 8 00-6 9 8-4SERVICES 838 Ê & REPAIR Ê Ê Ê 9 0 8-824-4200 Ê SERVICE Ê Ê www.sargentsequimpent.com

PA A 281Lionville, E. Sauk Trail P Chicago Heights, IL 60411 63-9200 61 0-3 708-758-2062 • Fax: 708-758-1345 155 Industrial Dr. Gilberts, IL 60136 847-844-4131

4805 Scooby Lane NW Carroll, OH 43112 866-262-4181 • Fax: 740-687-9130 Cleveland Branch 525 Golden Oak Pkwy Oakwood Village, OH 44146 440-439-4567 • Fax: 440-439-1789

199 Airport Road

Piketon Branch 3668 US Route 23 South Piketown, OH 740-289-3294

2999 Mexico Rd. O’Fallon, MO 63366 636-332-9970

Staten Island, NY 718 448 2444

Westbrook, Westbrook, e Cape Girardeau, M E MO 63702 573-334-9937 800 0 262-571 4

Cincinnati Branch 3120 S. Verity Pkwy. Middletown, OH 45044 513-649-8105 • Fax: 513-649-8107 7019 Brookville Rd. Indianapolis, IN 46239 317-375-7790 • Fax: 317-375-7792

terex.com/construction

www.lubyequipment.com

Caribou, 2300 M ECassens Dr. Fenton, MO 63026 7 0-25 47 800-2 636-343-9970 • Fax: 636-343-4811

2625 North 24th St. Quincy, IL 62305 217-222-5454 4375 Camp Butler Rd. Springfield, IL 62707 217-744-2233 8853 Petroff Dr. Caseyville, IL 62232 618-397-9971

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • September 13, 2014 • Page 87

Attachments can make your machine more valuable. Allied offers a wide assortment of attachments to fit all of your makes and models of excavator, loader/backhoe, mini-excavator, skid-steer or compact track loader machines. Allied has become attached to your machines. Allied’s construction and demolition attachments are productive and dependable. State-of-the-art technology.Full product line. Competitive price and performance. Allied offers innovative, problem-solving capabilities. Commitment to product availability. Superior product support. Strong Distributor network. Most of all Allied meets and exceeds customer performance expectations. To put a high performance Allied attachment on your machine, call us at 1-800-321-1046 or visit AlliedCP.com for the name of a Distributor nearest you. We’ve become attached to your machines.

CONSTRUCTION MACHINERY COMPANY www.cmcky.com 2911 S. English Station Rd. Louisville, KY 40299 502-267-4020 866-901-2262 Fax: 502-261-9251

2235 Ragu Drive Owensboro, KY 42303 270-683-2000 877-683-2262 Fax: 270-683-3727 267 W. Jay Louden Rd. Carrollton, KY 41008 502-732-4661 Fax: 502/732-8355

ILLINOIS TRUCK & EQUIPMENT

HOWELL TRACTOR AND EQUIPMENT

www.iltruck.com 320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486

www.howelltractor.com 480 Blaine St. Gary, IN 46406 800-852-8816 Fax: 219-977-6395 2770 May Rd. Peru, IL 61354 815-224-3003 Fax: 815-224-2538

Page 88 • September 13, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Alta Equipment Company www.altaequipment.com 28775 Beck Rd. Wixom, MI 48393 (248) 449-6700 Fax: (248) 449-6701 2470 W. Columbia Ave. Battle Creek, MI 49015 (269) 965-1269 Fax: (269) 965-1881 8840 Byron Commerce SW Byron Center, MI 49315 (616) 878-7450 Fax: (616) 878-7650 4716 Talon Ct. S.E. Kentwood, MI 49512 (616) 698-2960 Fax: (616) 698-2901 6327 Jomar Ct. Lansing, MI 48917 (517) 272-5033 Fax: (517) 272-7257 5920 Grand Haven Rd. Muskegon, MI 49441 (231) 798-9754 Fax: (231) 798-9387 28855 Smith Rd. Romulus, MI 48174 (734) 641-8238 Fax: (734) 641-8334 1524 Champagne Dr. Saginaw, MI 48604 (989) 752-9400 Fax: (989) 752-9834 7500 E. 15 Mile Rd. Sterling Hts., MI 48312 (586) 977-6000 Fax: (586) 977-6099 476 US 31 South Traverse, MI 49685 (231) 943-3700 Fax: (231) 943-8110 56195 Pontiac Trail New Hudson, MI 48165 (248) 356-5200 Fax: (248) 356-2029 9433 Riley St. Zeeland, MI 49464 (616) 748-4108 Fax: (616) 748-4120

Murphy Tractor & Equipment Co. www.murphytractor.com 5087 E. Broadway Ave. Des Moines, IA 50317-4744 Toll Free: (800) 822-2212

8600 NE Parvin Rd. Kansas City, MO 64161-8300 Toll Free: (888) 306-3434

1509 Raff Rd. SW Canton, OH 44710-2321 Toll Free: (866) 235-0438

1303 3rd Ave. NW Fort Dodge, IA 50501-2257 Toll Free: (800) 362-2487

1401 S. State Highway MM Springfield, MO 65802-7726 Toll Free: (888) 306-2656

5775 US Highway 23 Chillicothe, OH 45601-9562 (740) 663-5300

4900 Harbor Dr. Sioux City, IA 51111-1106 Toll Free: (800) 352-4693

220810 Hwy 92 Gering, NE 69341-5236 Toll Free: (800) 205-6784

11441 Mosteller Rd. Cincinnati, OH 45241-1829 Toll Free: (800) 844-3734

3469 W. Airline Hwy Waterloo, IA 50703-9594 Toll Free: (800) 772-2019

3204 S. Engleman Rd. Grand Island, NE 68803-6621 Toll Free: (800) 868-4017

2121 Walcutt Rd. Columbus, OH 43228-9575 Toll Free: (800) 222-2010

10893 112 Rd. Dodge City, KS 67801-6585 Toll Free: (800) 794-0172

6100 Arbor Rd. Lincoln, NE 68517-3211 Toll Free: (800) 416-5518

3550 Saint Johns Rd. Lima, OH 45804-4017 Toll Free: (800) 423-7445

325 S. Highway 281 Great Bend, KS 67530-9621 Toll Free: (800) 264-4056

3701 S. Jeffers St. North Platte, NE 69101-7844 Toll Free: (800) 894-7060

811 Callendar Blvd. Painesville, OH 44077-1218 Toll Free: (866) 800-1398

5255 N Deere Rd Park City, KS 67219 Toll Free: (800) 262-0139

9751 S. 148th St. Omaha, NE 68138-3898 Toll Free: (800) 416-5095

590 E. Western Reserve Rd. Bldg 3 Poland, OH 44514-3393 Toll Free: (866) 503-7259

1621 NW Gage Blvd. Topeka, KS 66618-2831 Toll Free: (800) 279-6087

1240 Industrial Pkwy N. Brunswick, OH 44212-4317 Toll Free: (800) 716-9796

1015 Industrial Park Dr. Vandalia, OH 45377-3117 Toll Free: (800) 233-4228

1410 W. Oklahoma Ave. Ulysses, KS 67880 Toll Free: (800) 472-9238

60611 Hulse Rd. Cambridge, OH 43725-8937 (740) 439-2747

20400 Route 19 Cranberry Township, PA 16066 (724) 776-3636 1973 Route 66 Greensburg, (Delmont) PA 15601-9297 (724) 837-4500

Brandeis Machinery & Supply Co. www.brandeismachinery.com Evansville, IN (812) 425-4491 Ft. Wayne, IN (260) 489- 4551 Indianapolis, IN (317) 872-8410 Corbin, KY (606) 528-3700 Lexington, KY (859) 259-3456 Louisville, KY 502) 491-4000 Paducah, KY (270) 444-8390 Stanville, KY (606) 478-9201

Astec Industries has named Jeff Elliott as group vice president of the Astec Aggregate Mining Group.

Astec Industries Promotes Elliott Astec Industries has named Jeff Elliott as group vice president of the Astec Aggregate Mining Group. His responsibilities will include direct oversight of Kolberg-Pioneer Inc. (KPI) in Yankton, S.D., Johnson Crushers International (JCI) in Eugene, Ore., Astec Mobile Screens in Sterling, Ill., and Telestack Ltd. in Omagh County, Tyrone, Northern Ireland. KPI-JCI and Astec Mobile Screens is an American manufacturer for the aggregate, recycling and construction industries. Telestack is a mobile bulk handling equipment manufacturer. In his new role, which he assumed July 1, Elliott is responsible for overseeing all operational aspects of Telestack and KPI-JCI and Astec Mobile Screens, and will report directly to Group President Rick Patek. Patek is responsible for Astec Industries subsidiaries Breaker Technology Inc., Osborn Engineered Products SA, Telsmith and Astec do Brazil. Previously, KPI-JCI and Astec Mobile Screens and Telestack were under the direction of Group President Joe Vig, who retired July 1. As group vice president, Elliott will work closely with the presidents of KPI-JCI and Astec Mobile Screens and Telestack Ltd. and provide guidance and direction on meeting and exceeding company strategic goals. “I look forward to working with Rick Patek to tap into his lifetime of experiences in all elements of manufacturing and selling aggregate, recycling and mining equipment,” Elliott said. “Together, we will supply the guidance and direction to ensure both of our teams are properly aligned and have the required resources to meet our objectives.” Previously, Elliott served as president of Johnson Crushers International, KPI-JCI and Astec Mobile Screens’ Oregon manufacturing facility. Prior to that, he served as senior vice president of sales and marketing for Cedarapids, Inc. For more information, visit www.kpijci.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide â&#x20AC;˘ Recycling Section â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ September 13, 2014 â&#x20AC;˘ Page 89

5)& 0/-: 5)*/( 4530/(&3 8*-- #& :063 #0550. -*/&

t #364) $)*11&34 t 456.1 (3*/%&34 t 8)0-& 53&& $)*11&34 t #&"45 3&$:$-&34 t '03&453: .08&34

The industryâ&#x20AC;&#x2122;s toughest, longest lasting woood processing equipment is available through th the worldwide network of authorized Bandit dealers. ale Contact yours today and see how a Bandit dit chipper,, grinderr,, or recycler can help boost your operationâ&#x20AC;&#x2122;s bottom line.

1-800-952-0178

#"/%*5$)*11&34 $0. # "/%*5$)*11&34 $0.

SMALL EQUIPMENT DEALERS (BRUSH CHIPPERS, STUMP GRINDERS, ARBORVVAC)

N. River 50505050 N. River Rd. Rd. Schiller IL 60176 Schiller Park, Park, IL 60176 847-678-3633 847-678-3633 847-678-3587 Fax: Fax: 847-678-3587 Mokena, IL Mokena, IL 708-596-8050 708-596-8050 West Chicago, IL West Chica go, IL 630-293-0606 630-293-0606

WWauconda, auconda, IL IL 847-526-4255 847-526-4522 YYorkville, orkville, IL IL 630-553-0150 630-553-0150

www.atlasbobcat.com www.atlasbobcat.com

1800 13 1800W. W. Hwy Hwy 13 Burnsville, 55337 Burnsville, MN MN 55337 952-894-0894 952-894-0894 877-262-2284 877-262-2284 3101 Spruce St. 3101 Spruce Little Canada, MNSt.55117 Little651-407-3727 Canada, MN 55117 651-407-3727 877-331-0295 877-331-0295

LARGE EQUIPMENT DEALERS (BEAST (BEAST, WHOLE TREE CHIPPERS, FORESTRY MOWERS)

745 Exchange 745 Exchange DriveDrive Hudson, WI 54016 Hudson, WI 54016 715-531-0801 715-531-0801 866-268-2418 866-268-2418 NEW LOCATION COMING www .tristatebobca t.com SOON! 1200 East Hwy 13 Burnsville, MN 55337 952-894-0894 www.tristatebobcat.com

CoAshland, wen, WV KY 606-928-3477 304-226-3299 Beaver,, WV Cowen, WV 304-255-1525 304-226-3299 Cross Lanes, WV Beaver, WV 304-204-1818 304-255-1525 Fairmont, WV 304-534-5454 Cross Lanes, WV

Fairmont, WV Norton, WV 304-534-5454 304-226-3299 Pikeville, WV

Norton, WV 304-255-1525 304-636-6421 Marietta, OH

Pikeville, KY 304-204-1818 606-432-0321 www.lec1.com www.lec1.com

304-204-1818

For large equipment inquiries in OH, IN,, KY KY, Y, IL,, IA,, MN, Y, M WI and MI,, or if your region is not represented above,, please call us or visit us online for assistance.

Page 90 • September 13, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Illinois

Indiana

Michigan

Minnesota

Ohio

Midwest Crushing & Screening

Powerscreen Indiana, Inc.

Powerscreen of Michigan

Theco, Inc.

AGGCORP

7144 N Harlem Ave. Chicago, IL 60631 midwestcrushandscreen@gmail.com 847.271.5027

255 N Hetzler Court Angola, IN 46703 www.powerscreenindiana.com 313.841.8370

36639 Groesbeck Hwy. Clinton Township, MI 48035 www.powerscreenofmichigan.com 586.229.2882

5470 Quam Ave. NE St. Michael, MN 55376 www.thecoinc.com 800.776.0335

22800 Lakeland Blvd. Cleveland, OH 44132 www.aggcorp.net 614.309.6854

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • September 13, 2014 • Page 91

Purpose-built

from the ground up by Material handlers from SENNEBOGEN – 444,000 4,000 llbs. bs. tto o 75 7750,000 0,000 llbs. bs. Simple S imple design… design… Lift Lift more. morre. Mov Movee faster.. Save Save fuel. fuel. Run Run longer. ALTA EQUIPMENT COMPANY www.altaconstructionequipment.com

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com

Muskegon, MI 231-798-8754

Sterling Hts, MI 586-977-6000

Kentwood, MI 616-698-2960

Traverse, MI 231-943-3700

Battle Creek, MI 269-965-1269

Louisville, KY 502-491-4000

Paducah, KY 270-444-8390

Evansville, IN 812-425-4491

Indianapolis, IN 317-872-8410

Zeeland, MI 616-748-4108

Corbin, KY 606-528-3700

Ft.Wayne, IN 260-489-4551

New Hudson, MI 248-356-5200

Lansing, MI 517-272-5033

Lexington, KY 859-259-3456

Romulus, MI 734-641-8238

Wixom, MI (Cons. Division) 248-356-5200

Stanville, KY 606-478-9201

Saginaw, MI 989-752-9400

Byron Center, MI 616-878-7450

HOWELL TRACTOR & EQUIPMENT LLC www.howell tractor.com Gary,IN 800-852-8816 Peru, IL 800-342-6072

GIBSON MACHINERY LLC

MURPHY TRACTOR & EQUIPMENT CO.

www.gibson machinery.com

murphytractor.com

Cleveland, OH 440-439-4000

Cincinnati, OH 800-844-3734

Pittsburgh, PA 724-695-5000

Vandalia, OH 800-233-4228

ROLAND MACHINERY CO. www.rolandmachinery.com

THE VICTOR L. PHILLIPS CO.

Carterville, IL 618/985-3399

Franksville, WI 262-835-2710

Bridgeton, MO 314-291-1330

DePere, WI 920-532-0165

Columbia, MO 573-814-0083

DeForest, WI 608-842-4151

Cape Girardeau, MO 573-334-5252

Eau Claire, WI 715-874-5400

Brookline Station, MO 800-955-2729

Schofield, WI 715-355-9898

Wichita, KS 800-878-3346

Escanaba, MI 906-786-6920

Topeka, KS 800-878-4345

Palmyra, MO 573-769-2056

www.vlpco.com Kansas City, MO 800-878-9290 Joplin, MO 800-878-8223

Garden City, KS 800-511-1435

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com Savage, MN 800-888-9515

Milan, IL 800-633-9114

Des Moines, IA 800-555-1445

Duluth, MN 800-888-9535

Cedar Rapids, IA 800-616-6615

Virginia, MN 800-752-4304

Sioux City, IA 800-633-9104

TITAN MACHINERY www.titanmachinery.com Bismark, ND 800-247-1282

Rapid City, SD 888-388-0266

Dickinson, ND 888-418-2873

Sioux Falls, SD 800-262-5373

Fargo, ND 800-342-4330

Williston, ND 877-570-4635

Omaha, NE 866-733-1100

Lincoln, NE 866-801-6261

Minot, ND 701-852-3188

Page 92 • September 13, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Announcing a Tough New Combination in Iowa, Illinois & Nebraska with

Sales, Service, Parts & Rental Provided By

For Tough Crushing & Screening Solutions

Call 319-857-4045 www.rtlequipment.com

CRUSHING PLANTS

We Call It EXPERTISE. You Call It PEACE OF MIND.

SCREENING Plants

IROCK knows the demands of your industry. Not just because we hear it, but because we’ve seen it and lived it, too. Our team of experts has years of hands-on experience working in your business and providing superior service. So when it comes to increasing efficiencies, reducing wear and boosting your bottom line, we're confident we have the right answers. For more information, call 866-240-0201 or see our equipment in action at www.irockcrushers.com.

w w w. i r o c k c r u s h e r s . c o m

Closed-circuit PLANTS

Crush. Classify. Profit.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • September 13, 2014 • Page 93

Page 94 • September 13, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Construction Equipment Guide â&#x20AC;˘ Recycling Section â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ September 13, 2014 â&#x20AC;˘ Page 95

Meet any screening challenge.

LokotrackÂŽ mobile screens Whatever your application, there is a LokotrackÂŽ ST Series mobile screen that can handle it. Metso offers the widest selection of high capacity, dependable screens to meet any challenge, from aggregates processing to demolition and recycling. t &YDFMMFOU TDSFFOJOH DBQBDJUZ t *OUFMMJHFOU QSPDFTT DPOUSPM GPS TBGF BOE easy operation t &BTZ UP NPWF RVJDL TFU VQ t 'MFYJCJMJUZ XJUI B XJEF WBSJFUZ PG TDSFFO NFEJB t &DPOPNJDBM GVFM FGGJDJFOU QSPEVDUJWJUZ t 'VMM DPNQBUJCJMJUZ XJUI -PLPUSBDL -5 DSVTIFST

Lokotrack ST2.8 mobile scalping screen

Contact your local Metso distributor today. www.metso.com/lokotrack

Lokotrack ST3.5

Lokotrack ST2.4

1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508 7910 Highway 2 W Devils Lake, ND 58301 701-665-3800 4950 E Highway 12 Aberdeen, SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

Lokotrack ST4.8

CENTRAL SERVICE & SUPPLY, INC. www.centralsands.com 4219 E. 50th St. Des Moines, IA 50317 800-247-2400 515-964-8600 Fax: 515-309-0667

AIS CONSTRUCTION EQUIPMENT CORP. www.aisequip.com 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Fax: 517-321-6275 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax:â&#x20AC;&#x2C6;616-538-0449 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311

Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 West Detroit, MI 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

Page 96 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLASSIFIEDS Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 ASPHALT EQUIPMENT

CRAWLER TRACTORS

Asphalt Cutters

Crawler Tractors

Attachments International ASPHALT CUTTERS SEVERE SERVICE HIGH SPEED ASPHALT CUTTER Skid Steers, TLB, Loaders, Excavators

1975 CAT D7G Crawler Dozer, OROPS, Ripper, 24'' Tracks, Good condition ..........$39,750.

14 Models Available ''24-48 hour shipping'' SPECIAL PRICING! Call 218-863-6444 www.attachmentsintl.com www.attachmentsusa.com

Asphalt Rollers 2006 JCB - Vibromax VM75, Vibratory roller, 84 HP Single drum, pictures available, good condition, 550 hrs ......$39,950. 908-625-0697

CRANES Rough Terrain Cranes 2003 Grove RT650E, 105' Boom, 29'-51' swingaway, tele. jib, auxillary winch, cab A/C, good condition ........$219,900. 952-656-7107

913-915-1607

EXCAVATORS Hydraulic Excavators 1984 CAT Excavator 225, GP Bucket, Average condition, 9,500 hours ..............$26,500. 913-371-3822

1993 Caterpillar 416B, 4x4 ExtendaHoe, GP front bucket, reversible outrigger pads, runs smooth, has A/C unit but it does not function, heat does work, delivery available in Indiana only ..............$22,900. Call 812-585-1245

Skid Steer Loaders 2014 John Deere 332E, 97 HP, 2SP, Cab, 84'' bucket, 680 hrs ..................................$49,900. 2013 John Deere 326E, 74 HP, 2SP, Cab, 84'' bucket, 256 hours..........................$49,600.

LOADERS Backhoe Loaders 2008 CAT 420E, A/C, QC, BKT, Forks and 4x4, great condition, 3,400 hours ..............$64,500. 913-787-2371 2013 JCB 4CX-14, Cab/AC, 100 HP Turbo 4WD/4WS Loader Aux., Hydraulics, Power shift Trans, Servo Backhoe Controls, Mint condition, low hours..........................$93,500. 908-625-0697 1997 Cat 416B, runs and operates very well. Tight backhoe and loader, nice machine! Everything functions, good tires. Delivery available within Indiana.

HAUG IMP 320-235-8115

MATERIAL HANDLERS Material Handlers 1999 Liebherr A932HD Good Fair condition, 17,968 hours.... ................................$125,000. Linkbelt 600LX, S/N K8J59072, with Young 3-piece front, Good-Fair condition, 25,580 hours..........................$75,000. Gibson Machinery, LLC 440-439-4000

Call 812-585-1245

Keep Up With All the Industry News Subscribe to

Construction Equipment Guide Today! Toll Free 800/523-2200

BusinessCalendar

Bolingbrook, IL . Food and drinks to celebrate Oktoberfest . Giveaways and door prizes . Equipment demos and special savings . McCann’s manufacturers will be available to answer your questions . Special one day only savings on equipment, parts and supplies To view our Business Calendar online, PLUS, Participate in our Excavator Skills Competition and Skid Steer go to www.constructionequipmentguide.com. Rodeo Prizes for the winners! Ohio Nursery & Landscape Association – ONLA Summer CEU As always, the friendly and knowledgeable McCann Team will be on Programs hand to provide guidance for any upcoming projects Tuesday, October 7, 2014 Register online to attend at www.McCannOnline.com or RSVP to Irrigation Electrical Service Workshop (10:00 AM to 2:00 PM) Diann Pemberton with how many are attending and who will be (Irrigation: Diagnostics, Repair & Servicing) competing in the events at dpemberton@McCannOnline.com, Location: Wolf Creek Company, Sharonville, OH Price: $40 ONLA Member; $60 Non-Member, Lunch Included; Telephone: 630/739-7770 Credits Available ONLA (Ohio Nursery & Landscape Assocation) Regional Education GRAPPLE HOOK, MARKETERS & REPRESENTATIVES OF INDUSTRI- Presents: AL PRODUCTS & SERVICES PRESENTS A WEBINAR ON CORRO- TREE CLIMBING 101 - WEDNESDAY, OCTOBER 8, 2014 - Time: SION ASSOCIATED WITH HEAVY EQUIPMENT AT THIS WEBINAR 9 AM to 1 PM THERE WILL BE DISCUSSION OF THE USE OF NANO TECHNOLOGY Price: $150 ONLA Member; $200 Non-Member, Instructor is Chris FOR CORROSION CONTROL. YOU WILL LEARN: WHAT CAUSES Ahlum ACCELERATED CORROSION; HOW SMALL CORROSION PROBLEMS Location: Franklin County Historical Society, 5274 Norwich Street, TURN INTO BIG CORROSION PROBLEMS; UNDERSTANDING AND Hilliard, Ohio TREATING DIFFERENT METALS; WHAT OWNERS SHOULD KNOW Lunch is included in Registration Fee. Deadline to register is one ABOUT SANDBLASTING AND SPECIAL EMPHASIS FOR THIS SEG- week prior to event. MENT IS CRITICAL STRUCTURAL COMPONENTS; FASTENERS, NUTS This training opens with an overview of the equipment and steps AND BOLTS; SALTWATER CORROSION; HIGH ACID ENVIRONMENTS. participants need to follow for safe tree climbing in a variety of situations. Come learn and practice climbing a tree the right way from DATE AND TIME: a TCIA Certified Tree Care Safety Professional. For more information, MONDAY, SEPTEMBER 15TH, 2014 AT 4:00 PM EST please call the ONLA office in Westerville, OH at 614/899-1195. WEBINAR IS FREE, LIMITED SPACE REGISTRATION INFORMATION: Ohio Aggregates & Industrial Minerals Association (OAIMA) PHONE: DAN JENKINS AT 813/877-4665 Storm Water Inspection Training Event EMAIL: DAN JENKINS AT DJENKINS@GRAPPLEHOOK.COM Date: October 15, 2014 PHOTOS/QUESTIONS ARE WELCOME IN ADVANCE Time: 11 AM to 2 PM Civil & Environmental Consultants (CEC) NTEA TRUCK PRODUCT CONFERENCE TUESDAY, SEPTEMBER 16, 2014 THROUGH THURSDAY, Scioto Country Club, Columbus, OH Speakers include CEC Training/overview of the inspection process SEPTEMBER 18, 2014 REGISTER TODAY FOR NTEA’S TRUCK PRODUCT CONFERENCE AT by Harry Kalipolits of the Ohio EPA. For more information, call toll THE ADOBA HOTEL, DEARBORN/ DETROIT, MICHIGAN. THE TRUCK free: 1-888-598-6808. PRODUCT CONFERENCE IS YOUR CHANCE TO PREVIEW NEXT YEAR’S VOCATIONAL TRUCK AND PRODUCT OFFERINGS FROM Mark Your Calendar for GIE+EXPO 2014 - OCTOBER 22 to OCTOBER 24, 2014 ELEVEN (11) LEADING CHASSIS MANUFACTURERS! FOR MORE INFORMATION ON THIS EVENT, YOU MAY CALL THE NTEA WEDNESDAY, OCT 22 – FRIDAY OCTOBER 24 Green Industry Conference and School of Grounds Management OFFICE AT TOLL FREE: 1/800-441-6832 WEDNESDAY, OCT 22 Dealer Day; Reception on the Tradeshow Floor and Free Concert at The Ohio State University Farm Science Review Event 4th Street Live! September 16 thru September 18, 2014 The 52nd annual Ohio State University Farm Science Review will be THURSDAY, OCT 23 held Sept. 16-18 at the Molly Caren Agricultural Center, and prepa- GIE+EXPO open to all industry participants, plus Free Concert at rations are well underway for the annual farming showcase, which 4th Street Live! attracts more than 130,000 farmers, growers, producers and agri- FRIDAY, OCT 24 cultural enthusiasts from across the U.S. and Canada annually. Indoor – 9 AM to 5 PM and Outdoor – 9 AM to 4 PM, plus Free Participants are able to peruse 4,000 product lines from more than Concert at 4th Street Live! 600 commercial exhibitors and engage in educational opportunities Excellent timing for manufacturers to show their complete new with Ohio State and Purdue University specialists, Ohio State lines…750 Exhibits throughout 500,000 sq. ft. inside the Kentucky Extension, and the Ohio Agricultural Research and Development Exposition Center and in the turf area outside…19 acres of outdoor Center. More than 600 commercial exhibitors set up shop at the demonstrations and test driving, adjacent to the indoor Review each year, displaying the latest and greatest in farming tech- exhibits…seminars to boost your efficiency and bottom line…connology, products, machinery and equipment. For exhibitors, it’s a venient mid-America location within driving distance of 60% of chance to reconnect with established customers and connect with America’s population…Networking opportunities. new ones. “If you come to the 2014 Farm Science Review, you will For more information, email: info@gie-expo.com. ‘Experience the Difference.’” The Media coordinators for the Farm TRIMBLE DIMENSIONS 2014 IS THE PLACE TO BE IN NOVEMScience Review are: BER. REGISTER NOW! Janice Welsheimer, Wilt Public Relations NOVEMBER 3 thru 5, 2014 LAS VEGAS, NEVADA 937/688-3878; Janice@wiltpr.com; www.wiltpr.com Trimble Dimensions User Conference 2014 is the must attend conTracy Turner, CFAES Communications and Technology ference for industry professionals such as yourself. Haven’t 614/688-1067; turner.490@osu.edu; http://cfaes.osu.edu attended in the past? Well, here’s what you’ve been missing! The Fourth Annual WEST VIRGINIA OIL & GAS EXPO cordially . Over 400 sessions lead by industry experts invites you to Morgantown, WV on WEDNESDAY, OCTOBER 1, . Pavilion with the latest technology showcased 2014 from 9 AM to 5 PM. . Unlimited networking opportunities Set up is Tuesday, September 30, 2014 from 10 AM to 6 PM. . Peer-to-peer collaboration Located just minutes from Interstate 79 in Morgantown, West . Professional Development House (PDH) Virginia, Mylan Park’s Expo Center is the perfect venue for the West . Hands-on training Virginia Oil & Gas Expo. In addition to over one acre of indoor . Special events – plus more! exhibit space, the location offers plenty of outside space for equip- Dimensions 2014 is the place to be in November. Discover firstment and vehicles. The paved parking lot located directly in front of hand how you can transform the way you work by integrating the expo center provides easy access and ample space for parking advanced positioning technology, field and office applications and and outdoor vendor space. Also, the facility provides FREE High real time communications. Speed Wireless Internet. For more information, contact: www.TrimbleDimensions.com or Venue Location: 500 Mylan Park Lane, Morgantown, WV 26501. Email: Trimble_Dimensions@Trimble.com. For more information, visit www.mylanpark.com. AGC OF MINNESOTA 2014 Paul Bunyan Show Schedule CONSTRUCTION FINANCIAL MANAGEMENT CONFERENCE Join us at the Official Paul Bunyan Show…”The Original American NOVEMBER 5 THROUGH 7, 2014 IN LAS VEGAS, NEVADA Forestry Show” The AGC/CFMA Construction Financial Management Conference will October 3 to 5, 2014 be held on November 5 – 7, 2014 in Las Vegas, Nevada. Get the 8 AM to 5 PM Friday and Saturday *** 9 AM to 3 PM Sunday latest information on: Construction Market Trends; Financial Guernsey County Fairgrounds, 335 Old National Road, Old Accounting Standards Board; Surety, Financial, and Credit Markets, Washington (Cambridge), OH Change Order and Claims Management; Federal acquisition regulaAdmission Prices: $8 – Adults * $4 – Seniors (60 and over) & Kids tions; construction taxes; strategies for economic conditions; busi(12-7) Children 6 & Under Free…No Pets Allowed! There will be ness real estate management; ethics and fraud. Register before forestry equipment running live throughout the grounds and it is a September 5th: $780/After September 5th: $860. Conference very loud and scary place for pets! No unauthorized vehicles, ATV’s Details are available at http://meetings.agc.org/agc _cfma. or personal golf carts allowed on Show grounds. Scooters will be available for rent $30 per day at the Show. First come, first served. Ohio Aggregates & Industrial Minerals Association (OAIMA) For more information on this show, please contact Ohio Forestry OAIMA 2014 Annual Meeting & Trade Show Association at 614/497-9580 or info@ohioforest.org. Hilton Columbus Hotel, Easton Town Center, Columbus, Ohio McCann Industries presents…OKTOBERFEST OPEN HOUSE & Dates: November 13-14, 2014 Hotel Information: Hilton Columbus Easton EQUIPMENT RODEO 3900 Chagrin Drive DATE: FRIDAY, OCTOBER 3, 2014 Columbus, Ohio 43219 TIME: 10 AM to 6 PM At McCann’s Bolingbrook Branch…250 E. North Frontage Road, Telephone: 614/414-5000

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 97

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95, Color Ad $145

2009 Takeuchi TL250, 2000 Hrs, Cab/Heat/Air, Brand New Tracks,80'' Tooth Bucket w/New Teeth, Hydraulic QC, Clean, Serial Number: 225000148 .......................................$48,000 Call Jim Spicer • 309-275-8545 19 JM Central Illinois Ag, Farmer City, IL

“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 3500 models of construction equip. PNEUMATIC AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states .............................................................Call

Summit Supply LLC 888-888-1248 • sales@summittracks.us 19-20 TM

2006 Gehl 7810 Turbo, 115HP, 2260 Hrs, 3675 Lb Lift, 84” Bkt, 2 Speed..................................$30,900 Call Scharber & Sons 763-428-410718-19 PK

New Compact Excavators ....Starting at $41,000 Call Dan 612-306-4496 18-19 PK

2013 Takeuchi TB016, 300 Hrs, OROPS, Hyd Thumb, Coupler, Rubber, 7’9” Dig Depth, 3500# Capacity.....$28,950 Call Steve Samosky • 262/373-2151 19 JM

2005 Takeuchi TL140, 2970 Hrs, Cab, 81 HP, 76” Bkt, 18” Rubber Tracks ...........................................................$24,250 Call Steve Samosky • 262/373-2151 19 JM

2004 Cat 320LC, 9350 Hrs, Hyd Cplr, Hyd Kit, 54” Bkt, 9’8” Stick, 33’ Reach, 48,000# .........................................$66,750 Call Steve Samosky • 262/373-2151 19 JM

1998 New Holland LX885, 1800 Hrs, 72” Tooth Bkt, 2200# Capactiy, 60 hp, 2 Speed, New Engine......................$11,400 Call Steve Samosky • 262/373-2151 19 JM

C-7 Engines for Sale, Guaranteed, Very Low Mile Takeout’s, 190-330hp ............................................................$7,500 ex. Also many other makes in stock Frontertruckparts.com • 866-241-2110 19-20 AP

2002 Vermeer HG525 Horizontal, 388 Hrs, Low Hour Trade In Powerful 525HP Cat Engine, Ready for Your Yard.....................................................$149,900 Call Alan Chenevey 800-392-2686 19-20 EB

Used 2010 S630 Bobcat Skid Loader, 74.3HP TurboDiesel, 549 Hrs, Tires Like New, 2-Speed, High-Flow, Cab w/Heat/AC, Switchable Controls, Stereo, Power Bob-Tach, Deluxe Instrumentation ...............................................$33,800 Top Notch Equipment 763-398-0079 19-20 PK

2012 Wacker WL50, 300 Hrs, Cab, A/C, Hyd Cplr, 75” .98 Cy Bkt, 10,660 Lbs, Articulated.................................$60,420 Call Steve Samosky • 262/373-2151 19 JM

2006 Ditch Witch FX60 Vacuum Excavator, 800 gal spoils capacity, 200 gal water tank, 4 cylinder Cummins engine, 3251 hours ..............................................$32,500 19-20 EB Call Tania 614-443-9751 x237

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. Call McLaren 888-492-4230 19 FS

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. 19 FS Call McLaren 888-492-4230

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 19 FS Call McLaren 888-492-4230

2012 Wacker 28Z3, 75 Hrs, OROPS, Coupler, Aux. Hyd, Rubber, 9’ Dig Depth, 5680 Lbs................................$32,710 Call Steve Samosky • 262/373-2151 19 JM

2008 70 Ton Liddell Drop Side Deck Lowboy Tri-Axle Trailer, Tandem Two-Axle Jeep, Two-axle Nitro Stinger with Motor ......................................................................$210,000 Sun Piledriving Equipment 302-539-7187 19-20 BB

2003 Ditch Witch 255SX Vibratory Plow, 12” Feed Blade w/3 Boring Rods, 550 Hrs, Exc. Condition.......................Call 19 JM Call Tim at 630-665-5600

2007 Ditch Witch XT1600, 221 Hrs, Tracks at 90%, Excellent Condition ................................$49,500 Call Tim 630-665-5600 19 JM

Page 98 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

2004 Cedarapids 452, Front Wheel Assist Topcon Electric 20’ Screed, 5546 Hrs..........................$87,500 Call 605-336-0411 19-20 PK

1991 John Deere 300D, S/N 775834, Open ROPS ....................................................................$19,000 Call 502/456-4050 Ask for Lynell or Albert 19-20 EB

1981 Grove Rt 755, 55 Ton S/N # 49225, Cummins Rebuilt, 110’ Main Boom, 32’ Jib, Auxilliary Hoist, 5 Sheave Block, Cleveland Ohio 19-20 EB Call Andy 216-316-1511 1993 Grove Rt 422, 22 Ton S/N # 78334, Cummins 4 Cyl 12,100 Hours, 3 Speed Transmission, 27’-70’ Main Boom, 25’-43’ Jib, Auxilliary Hoist,17.5 X 25 Tires, Ball, New Rotec, Boom Scope Cylinder Rebuilt, Fresh Grove Paint, Cleveland Ohio Call Andy 216-316-1511

SEE YOUR BARGAIN AD IN

COLOR 2010 Gehl V270 Vertical Lift Skid Loader, Like New, One Owner, 785 Hrs, OROPS, ISO Joystick Controls, 74” 22.8 Cu. Ft. HD Bkt, Custom Radiator Guard, Super Nice Machine! .......................................$29,900 19 JM Call George 219-696-8911

2012 Case SV250, s/n JAFSV250JBM435496, 100 Hrs, Cab w/Heat & AC, Two Speed, Hyd Coupler, 78” Bkt, 33x15.5 Tires ................................$43,500 Call Steve 630-878-8765 19 JM

2012 Case 850L, s/n NCD80092, 700 Hrs, Cab w/Heat & AC, 124” Blade, 24” Grousers ..$120,000 Call Mark 630-739-7770 19 JM

1998 Case 1840, s/n JAF0221937, 2800 Hrs, ROPS, Aux Hyds, 60” Bkt, 10x16.5 Tires.....$8,500 19 JM Call Ray 630-878-8810

ONLY $50 EXTRA FOR TWO INSERTIONS

19-20 EB

2007 Kobelco SK290LC-LR, s/n YQ13U5369, 4390 Hrs, 62’ Long Reach........................$119,000 19 JM Call David 219-696-5680

2011 Cat 980K, 4200 Hrs, Scale, EROPS w/A/C and Heat ........................................................$POR Courts Machinery • 507/678-2752 18-19 PK

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $95 per ad, $50 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at

800/523-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 99

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted 20 FEET TRAILER WITH 10 TIRES CONTACT: VIJAY PHONE: 9444411691 EMAIL: IE@JRMETALCHENNAI.COM –––––––––––––––––––––––––––––––– CATERPILLARS DOZER D7H AND G | WANTED GOOD USED CATERPILLARS BULLDOZER D7H AND D7G CONTACT: GABRIEL FOTSO PHONE: 2027101655 EMAIL: TOKAMGABI@YAHOO.FR –––––––––––––––––––––––––––––––– GOOD USED SCHWING BOOM TRUCKS | SCHWING W/MACK TRUCK MOUNTED CONCRETE BOOM TRUCKS 1994 & NEWER 32M TO 39METER CONTACT: WILLIAM CROSS PHONE: 407 595 8221 FAX: 407 843 0136 EMAIL:WILLIAM@CROSSPUMPING.COM –––––––––––––––––––––––––––––––– 544G MANUAL PEMBERTON QUICK COUPLER | 544G / E MANUAL QUICK COUPLER 544G 20.5 X 25 WHEELS AND TIRES, WILL TRADE FORESTRY TIRES AND WHEELS. CONTACT: MICK PHONE: 352-400-5026 EMAIL: MICK.FIELDS@FIELDCO.BIZ –––––––––––––––––––––––––––––––– BANDIT254/WOODCHUCK | PREFER DIESEL AND GOOD WORKING CONDITION CONTACT: CELIA PHONE: 1(806)665-4274 FAX: 1(806)665-4275 EMAIL:79107CELIAH@GMAIL.COM –––––––––––––––––––––––––––––––– KW DUMP TRUCK CONTACT: JOEL VANDER HEIDEN PHONE: 563-357-6273 EMAIL: JVH@FBCOM.NET –––––––––––––––––––––––––––––––– MUSTANG LOADER BUCKET | I AM LOOKING FOR A USED BUCKET WITH TEETH FOR MY 2003 MUSTANG MTL20 LOADER CONTACT: MIKE IPSAN PHONE: 703-675-3375 EMAIL: MIKEHORIZON@GMAIL.COM –––––––––––––––––––––––––––––––– INTERNATIONAL TD8C POWER SHIFT TRANSMISSION CONTACT: ROGER PHONE: 5706393058 EMAIL: ROGERPF1@FRONTIERNET.NET –––––––––––––––––––––––––––––––– TRAIL KING BELL TRAILERS CONTACT: SALVADOR PHONE: 575 317 1752 EMAIL: H.HTRUCKING@YAHOO.COM –––––––––––––––––––––––––––––––– CONCRETE BETCHING PLANT. CAPACITY 30 TO 60 CM/HOURS. GOOD CONDITION. LOCATION GUJARAT INDIA CONTACT: KIRIT GOSAI PHONE: +91 8980520210 EMAIL:ERVEENWMM@YAHOO.COM ––––––––––––––––––––––––––––––––

D10T TRANS | NEED A GOOD USED OR CORE TRANS FOR A D10T. ARR# 2135171 CONTACT: LEE PHONE: 254-562-7500 EMAIL: LERLERHIGHTECH@AOL.COM –––––––––––––––––––––––––––––––– NEEDED NOW PIPELAYER FOR D8R NOT ADVERTISED. USER ONLY FROM USA CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 OR 1 514 386 8975 EMAIL:JEANMAURICEBOUTIN @VIDEOTRON.CA –––––––––––––––––––––––––––––––– KOMATSU D65PX | 4000 HOURS OR LESS, FACTORY CAB, PAT OR SU/T BLADE, DRAWBAR OR RIPPER. NEED TO BUY 1 OR 2 UNITS RIGHT AWAY. CALL OR EMAIL WITH FULL DETAILS AND PRICE. THANK YOU. CONTACT: BUZZY KEITH PHONE: 404-610-6754 EMAIL: BUZZY@USAMACHINERY.COM –––––––––––––––––––––––––––––––– CAT D9N & D9R | LOOKING TO BUY CAT DOZERS IN URGENT BASIS WITH RIPPER AND BLADE, CAT D8N, D8R, D9N AND D9R, I NEED TO BUY 10 MACHINES. OFFERS FROM US, CANADA AND AUSTRALIA PLEASE. CONTACT: ROYAL MACHINERY TRADERS USA EMAIL: ROYALMACHINERYTRADERS @GMAIL.COM –––––––––––––––––––––––––––––––– CAT C32 GENERATOR SET | 1000KW, 60HZ, 480V TIER2 EMISSIONS COMPLIANT SOUND ATTENUATED ENCLOSURES PREFERABLY USED, WILL CONSIDER NEW CONTACT: JOE GALINDO PHONE: 18184529250 EMAIL: SALES @POWERGENENTERPRISES.COM –––––––––––––––––––––––––––––––– WA 75 LOADER CONTACT: DAVID CROSS PHONE: 307 4623298 EMAIL:TRACTORHAULIN@YAHOO.COM –––––––––––––––––––––––––––––––– MEC 4191RT SCISSOR LIFT | SCISSOR LIFT WITH KUBOTA DIESEL ENGINE. CONTACT: BENNY DE GUZMAN PHONE: 6323628251 FAX: 6324187282 EMAIL:BG@GUZENT.COM –––––––––––––––––––––––––––––––– CAT EXCAVATOR POCLAIN 32D | USED CONTACT: ABSHIR PHONE: 612-644-6564 EMAIL: DALQAF571@GMAIL.COM –––––––––––––––––––––––––––––––– MILLING MACHINES | CAT 450 AND 450-C MILLING MACHINES CONTACT: TOM ROSSER PHONE: 610-888-0762 EMAIL: TPROSS1947@GMAIL.COM ––––––––––––––––––––––––––––––––

CAT TRACK SKID STEER LOADER | LOW HOURS VERY GOOD CONDITION NO BEATERS WANTED CONTACT: JERRY PHONE: 724 484 7600 EMAIL: A1INTERSTATETOWING@YAHOO.COM –––––––––––––––––––––––––––––––– WOOD CHIPPER | NEW 990 HD BANDIT $$$$ HOW MUCH CONTACT: PETER COOK PHONE: 0418594302 EMAIL: ZADFIELDPTYLTD@BIGPOND.COM –––––––––––––––––––––––––––––––– CAT 330 EXCAVATOR LONG BOOM REACH | CATERPILLER EXCAVATOR 330 WITH A LONG REACH BOOM OR 336 CAT WITH LONG BOOM CAPABILITIES CONTACT: ANDREW BARBEAU PHONE: 1-587-233-6037 EMAIL: BARBEAUA@BEMACCORP.COM –––––––––––––––––––––––––––––––– CATERPILLAR D9N OR R | MANUAL TRANSMISSION AND ORIGINAL PAINT. CONTACT: TIAGO DONATO PHONE: (305) 909-9743 EMAIL:EQUIPMENTSALES@ JAXMACHINERY.COM –––––––––––––––––––––––––––––––– PILE DRIVING & FOUNDATION EQUIPMENT | I NEED YOUR USED HYDRAULIC PILE DRIVERS AND CAISSON BEAMS. CONTACT ME FOR THE BEST DEALS ON YOUR SURPLUS PILE HAMMERS. CONTACT: JEFF LAWSON EMAIL: JLAWSON29321@CHARTER.NET –––––––––––––––––––––––––––––––– WE BUY EQUIPMENT MANUALS | WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS, NOT INCLUDING TRUCKS AND VEHICLES. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. CALL OR EMAIL. CONTACT: GRACE FRANCES PHONE: 2708492270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– PILE DRIVING EQUIPMENT | LOOKING FOR USED DIESEL HAMMERS AND VIBRATORY HAMMERS. NEED 26" LEADS. CASH NOW! CONTACT: WILLIE EMAIL: WILLIE@PILEMAN.COM –––––––––––––––––––––––––––––––– TAILGATE | OX BODIES TAILGATE USED OR NEW FOR OUR TRI-AXLE TRUCK. A DEALERSHIP IN INDIANA OR KENTUCKY CONTACT: MAURICE FAX: 812-423-5499 EMAIL: M.COATESJR@CKUNITED.COM ––––––––––––––––––––––––––––––––

POLGRYS | I WANT TO BUY EATON HYDRAULIC PUMP. THIS PUMP COMES FROM TEREX FINLAY I1312 CRUSHER. PUMP MODEL NUMBER : 6422-225 AND 6422-226 (TWO HYDRAULIC PUMPS IN ONE) CONTACT: KAMIL PHONE: +48695415819 EMAIL: KAMIL@POLGRYS.PL –––––––––––––––––––––––––––––––– CONSTRUCTION | NEED A KOMATSU PC1250 / PC1100 STICK ANY LENGTH TO STRETCH FOR A CUSTOMER OF OURS. CONTACT: TYLER PALUMBO EMAIL: PALUMBO519@HOTMAIL.COM –––––––––––––––––––––––––––––––– CAT H12 | LOOKING FOR CAT H12 FROM 2004-2009 CONTACT: DAVE ENGEL PHONE: 718-662-9524 EMAIL: DAVE@KARIMCHINA.COM –––––––––––––––––––––––––––––––– D6HLGP | LOOKING FOR D6H LGP. THANKS CONTACT: SANTIAGO SCARZELLA PHONE: 3055064263 EMAIL: SSCARZELLA@GMAIL.COM –––––––––––––––––––––––––––––––– KOMATSU BR380JG1 TRACK JAW CRUSHER | LATE MODEL LOW HOUR, USA LOCATION CONTACT: RICHARD PHONE: 603 N828-6100 EMAIL: CMIEQUIP@YAHOO.COM –––––––––––––––––––––––––––––––– NEED D8R BULLDOZER WITH MANY HOURS. MUST RUN. NOT ADVERTISED. USA ONLY CONTRACTORS. CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 OR MOB 1 514 386 8975 EMAIL:JEANMAURICEBOUTIN @VIDEOTRON.CA –––––––––––––––––––––––––––––––– WELDING MACHINE CONTACT: ROGER PHONE: 4322387403 EMAIL: ROGER.LUJAN@YAHOO.COM ––––––––––––––––––––––––––––––––

ATLAS COPCO F9 ROCK DRILL | I AM LOOKING FOR 1000 HRS OR CLOSE TO ATLAS COPCO F9 NO OLDER THAN 2012 IN GOOD ORDER CONTACT: F STOPFORD PHONE: 0400 5888 58 EMAIL: STOPFORDDRILLING@BIDPOND.COM –––––––––––––––––––––––––––––––– CRAWLER CRANE | 70 TON-120 TONS FROM YEAR 1990 CONTACT: CAN PHONE: 0031624971056 FAX: 0031107952268 EMAIL: R.CAN2@CHELLO.NL –––––––––––––––––––––––––––––––– JLG E400AJPN | CHERRY PICKER JLG MODEL # E400AJPN SER # 030081318 BOOM 40 – 46 FT ELECTRIC ARTICULATING NARROW CONTACT: CHERRY VILLAN PHONE: 709-6515778 FAX: 709-700-5001 EMAIL:CVILLAN@DJGRP.COM –––––––––––––––––––––––––––––––– CASE LOADER BACKHOES | CASE 580 LOADER BACKHOES MODELS SK L SL M SM N SNS CONTACT: FRANK @ TRICO EQUIPMENT PHONE: 1-800 TRICO 50 FAX: FAX 732-780-3618 EMAIL: FHORAN@TRICOEQUIPMENT.COM –––––––––––––––––––––––––––––––– DOZER AND EXCAVATOR | LOOKING FOR CAT 325CL, CAT 325L, CAT D8N OR/AND D9N. USA LOCATION ONLY. THANKS! CONTACT: SANTIAGO SCARZELLA PHONE: 3055064263 EMAIL: SSCARZELLA@GMAIL.COM –––––––––––––––––––––––––––––––– KACR7083T00243PUMP | KAC-R708-3T00243PUMP HYD.PIS DO U HAVE ANY USED CONTACT: STAN BETTS PHONE: 7163264841 EMAIL: BETTS@FAIRPOINT.NET –––––––––––––––––––––––––––––––– KOMATSU WA600 | WE ARE LOOKING FOR KOMATSU WA600 AND HD405, 325.465. CONTACT: MASSIMO RANIERI PHONE: +491775778980 EMAIL:MACHINERY@T-ONLINE.DE –––––––––––––––––––––––––––––––– DOZER TRACKHOE | WOULD LIKE TO FIND A GOOD SIZE DOZER WITH ROOT RAKES AND A LARGE TRACK HOE IN GOOD SHAPE FOR A FAIR PRICE CONTACT: TOMMY PHONE: 251-604-0149 EMAIL: TEWSLANDSCAPING@AOL.COM –––––––––––––––––––––––––––––––– KOMATSU PC78 MR6 LONG STICK CONTACT: JOHNSLED PHONE: 5704438958 EMAIL: T.J.SLEDZIEWSKI @PA.METROCAST.NET ––––––––––––––––––––––––––––––––

YANMAR ENGINE | I HAVE A VOLVO EC55B EXCAVATOR AND I NEED AN ENGINE FOR IT. I NEED A YANMAR 4TNE94-SM ENGINE AND I WOULD LIKE TO KNOW IF YOU CAN HELP ME LOCATE ONE. PLEASE CONTACT ME AT YOUR EARLIEST CONVENIENCE. THANK YOU CONTACT: MARIA PHONE: 9735739561 EMAIL: GMHCONSCO@AOL.COM –––––––––––––––––––––––––––––––– ATTENTION CONTRACTORS | WE ARE LOOKING FOR CAT WHEEL LOADERS, 910, 920, 930, 950, 950B, 950E, 966D HERE IN USA, OR AUSTRALIA UNADVERTISED & WHOLESALE PRICE, QUOTE ME ON MY EMAIL.THANK YOU CONTACT: ROYAL TRADERS EMAIL: ROYALMACHINERYTRADERS @GMAIL.COM –––––––––––––––––––––––––––––––– EXCAVATORS, BACKHOE LOADERS | EXCAVATORS 20 A 22 TON (YEAR 2012, 2103, 2014)LESS THAN 2000 HOURS BACKHOE LOADERS (YEAR 2012, 2013, 2014)LESS THAN 2000 HOURS ONLY IN EUROPE WWW.MAKCHINES.COM CONTACT: EMANUEL FERNANDES PHONE: +351 916494618 EMAIL: EMANUELGOMESFERNANDES @HOTMAIL.COM –––––––––––––––––––––––––––––––– INSLEY K12 | MANUALS FOR INSLEY K12 DRAGLINE CONTACT: BILL STEPHENSON PHONE: 765 618 6548 FAX: N/A EMAIL:BILLSTEPHENSON42 @YAHOO.COM –––––––––––––––––––––––––––––––– CAT 450 AND 450-C MILLING MACHINES CONTACT: TOM ROSSER PHONE: 610-888-0762 EMAIL: TPROSS1947@GMAIL.COM –––––––––––––––––––––––––––––––– EXCAVATORS | HITACHI ZX 210 - 2012 TO 2014 LESS 1000 HOURS KOMATSU PC 210 - 2012 TO 2014 LESS 1000 HOURS CATERPILLAR 320 - 2012 TO 2014 LESS 1000 HOURS BACKHOE LOADER NEW CONTACT: EMANUEL FERNANDES PHONE: +351 916494618 EMAIL:EMANUELGOMES FERNANDES@HOTMAIL.COM –––––––––––––––––––––––––––––––– TEREX TS14G SCRAPER | LOOKING FOR ONE TS14G, LATE MODEL WITH 5,000 HOURS OR LESS, CAB, AC, PUSH PULL CONTACT: ADT RESOURCES INC. PHONE: 510-338-3023 EMAIL:ADTRESOURCESINC@ GMAIL.COM –––––––––––––––––––––––––––––––– GRADER 12 G CONTACT: NORBERT PHONE: 240-593-5021 EMAIL: IFENWANDO@YAHOO.COM ––––––––––––––––––––––––––––––––

Page 100 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Odessa, TX Wed., September 17, 2014 For: Late model Cat, John Deere Construction Equipment • Las Vegas, NV Sat., September 20, 2014 For: Cat & John Deere Construction Equipment • Dallas, TX Tues., September 23, 2014 For: Fleet Rental Construction & Oilfield Equipment & more • Atlantic City, NJ Sat., September 27, 2014 For: Late Model Rental Returns • Syracuse, NY Sun., September 28, 2014 For: Rentals – Late Model Construction Equipment & more • Atlanta, GA Tues., September 30, 2014 For: Cat, John Deere & Komatsu Construction Equipment • Mobile, AL Wed., October 1, 2014 For: Major Job Completion • Gouverneur, NY October 9 - 11, 2014 For: 3 Days – 3 Complete Liquidations!

• Raleigh-Durham, NC September 30, 2014 • St. Louis, MO September 30, 2014 • Chicago, IL October 2, 2014 • Las Angeles, CA October 2, 2014 • Columbus, OH October 7, 2014 • Duluth, MN October 8, 2014 • Manchester, NH October 9, 2014 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Sacramento, CA Sat., September 13, 2014 For: Heavy Equipment & Used Car Auction • Riverside, CA Sat., September 20, 2014 For: Heavy Equipment & Used Car Auction BIG IRON www.bigiron.com 800-937-3558 • ONLINE ONLY September 17, 2014

• Racine, WI Sat., October 18, 2014 For: Late Model Construction & more

• ONLINE ONLY September 24, 2014

• Kissimmee, FL Wed., October 22, 2014 For: Late Model Rental Equipment & more

• ONLINE ONLY October 8, 2014

• Bangor, ME Sat., October 25, 2014 For: Late Model Construction & Rental Fleet Equipment • Parkersburg, WV Fri., October 31, 2014 For: Late Model Oilfield Equipment • Columbus (Delaware), Ohio Sat., November 1, 2014 For: Late Model Construction Equipment & more • Canastota, NY Sat., November 8, 2014 For: Late Model Construction Equipment & more • Boston, MA Sat., November 15, 2014 For: Late Model Snow Removal & Construction Equipment • Albany, NY Sat., December 27, 2014 For: Rental Fleet Construction Equipment & more RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Salt Lake City, UT September 16, 2014 • Atlanta, GA September 18, 2014 • Minneapolis, MN September 19, 2014 • Gillette, WY September 23, 2014 • Nashville, TN September 23, 2014 • Fort Worth, TX September 24-25, 2014 • Kansas City, MO September 26, 2014

• ONLINE ONLY October 1, 2014

• ONLINE ONLY October 15, 2014 • ONLINE ONLY October 22, 2014 • ONLINE ONLY October 29, 2014 • ONLINE ONLY November 5, 2014 • ONLINE ONLY November 12, 2014 • ONLINE ONLY November 19, 2014 • ONLINE ONLY November 26, 2014 CAT AUCTION SERVICES www.catauctions.com 866-750-9432 • ONLINE ONLY Wed., September 17, 2014 For: eQuipment Yard • ONLINE ONLY Wed., October 15, 2014 For: eQuipment Yard

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com • Denver, CO Thurs., December 4, 2014 For: Construction Equipment

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230

• Minneapolis, MN Tues., December 9, 2014 For: Construction Equipment

• Foley, MN Fri., December 5, 2014 For: Heavy Construction Equipment, Truck & Trailer

• ONLINE ONLY Wed., December 17, 2014 For: eQuipment Yard COMMONWEALTH OF PA www.auctionsbygov.com 866-469-7383 • Lehighton, PA Tues., October 14, 2014 For: Fall Heavy Equipment Auction DAVIS AUCTIONS www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., September 27, 2014 For: Construction Equipment • Prospect, CT Sat., December 13, 2014 For: Construction Equipment DEANCO AUCTIONS www.deancoauction.com 601-656-9768 • Philadelphia, MS September 17-18, 2014 For: Construction Equipment & more DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277 • Pendleton, IN Fri., September 19, 2014 For: 22nd Annual Fall Auction • Lucasville, OH Sat., October 18, 2014 For: 10th Annual Southern Ohio Consignment Auction

• ONLINE ONLY October 9, 2014 • ONLINE ONLY October 16, 2014

• ONLINE ONLY October 30, 2014 • ONLINE ONLY November 6, 2014 • ONLINE ONLY November 13, 2014 • ONLINE ONLY November 20, 2014 • ONLINE ONLY December 4, 2014

• Sewickley, PA Wed., October 1, 2014 For: Complete Liquidation Construction Equipment • West Middlesex, PA Thurs., October 2, 2014 For: Complete Liquidation Construction Equipment

• Rome, NY Sat., November 22, 2014 For: Heavy Equipment • Lansing, MI Thurs., December 6, 2014 • Atlanta, GA Thurs., December 11, 2014 • West Palm Beach, FL Sat., December 13, 2014 JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • Brooklyn, MS September 11-13, 2014 For: 3 Day Early Fall Contractors Auction (Day One Online Only) JENNINGS AUCTION GROUP www.jenningsauction.com 717-268-0020 • Harrisburg, PA Sat., September 13, 2014 For: Excavation Equipment MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888 • ONLINE ONLY September 8-15, 2014 For: Tools, Support Equipment & more • Pelzer, SC September 24 - 25, 2014 For: 2 Day Fall Contractor’s Auction • Easley, SC Wed., October 15, 2014 For: One Owner Absolute Auction • ONLINE ONLY October 20 - 27, 2014 For: Machine Shop Equipment, Pumps, Tools, Presses & more

• ONLINE ONLY December 18-19, 2014

NITKE AUCTIONS www.nitkeauctions.com 715-693-4447

J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE

• Wausau, WI October 24 - 25, 2014 For: 49th Annual Contractors Auction

• Gary, IN Sat., September 20, 2014 For: Heavy Equipment

HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898

• Portland, OR Thurs., November 20, 2014 For: Heavy Equipment

• ONLINE ONLY December 11, 2014

• Atlanta, GA Fri., September 19, 2014 For: 100% Absolute Auction – Heavy Construction Equipment

• Carencro, LA September 24 - 25, 2014 For: 2 Day Contractor’s Auction

• Warner, NH Fri., November 21, 2014 For: Construction Equipment

• ONLINE ONLY October 2, 2014

• St. Louis, MO Thurs., September 18, 2014 For: Heavy Equipment

• Pittsburgh, PA Thur., October 30, 2014 For: Construction Equipment

• ONLINE ONLY Wed., November 19, 2014 For: eQuipment Yard

• ONLINE ONLY September 25-26, 2014

EURO AUCTIONS USA www.euroauctions.com 770-683-3883

HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252

• Oklahoma City, OK Tues., November 18, 2014 For: Construction Equipment

• ONLINE ONLY September 18, 2014

• ONLINE ONLY October 23, 2014

• Lancaster, PA Thur., October 16, 2014 For: Construction Equipment

• Las Vegas, NV Fri., November 14, 2014 For: Construction Equipment

IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid!

• Charlotte, NC Sat., November 13, 2014 For: Heavy Equipment

• Jackson, MS Thurs., September 25, 2014 For: Heavy Equipment • Cincinnati, OH Thurs., October 9, 2014 For: Heavy Equipment • Dallas, TX Thurs., October 16, 2014 For: Heavy Equipment • South Beloit, IL Sat., October 23, 2014 For: Heavy Equipment • Worcester, MA Thurs., October 25, 2014 For: Heavy Equipment • Kansas City, MO Thurs., November 6, 2014 For: Heavy Equipment • Philadelphia, PA Thurs., November 8, 2014 For: Heavy Equipment

PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com 860-642-4200

• Plaistow, NH November 14-15, 2014 For: Complete Dispersal – S&R Construction Enterprises PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Thurs., September 25, 2014 For: Construction Equipment • ONLINE ONLY Thurs., September 25, 2014 For: McAlister Aggregates Realignment Auction • ONLINE ONLY Thurs., October 2, 2014 For: LaForge Construction Retirement Auction RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Lebanon, TN Sat., September 20, 2014 For: Heavy Equipment, Trailer, Trucks & Commercial Vehicles ROLLER AUCTIONEERS www.rollerauction.com 866-515-1668 • Denver, CO Wed., September 17, 2014 For: Heavy Construction & Contracting Equipment SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • Windsor Locks, CT Sat., October 4, 2014 For: Construction Equipment UTILITY AUCTIONS www.utilityauctions.net 302-530-9103 • Wilmington, DE Fri., October 24, 2014 For: Construction, Utility & Forestry Equipment WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-5700 • Princeton, MN Sat., September 13, 2014 For: Construction Equipment, Truck & Trailer Auction • Princeton, MN Sat., December 6, 2014 For: Heavy Equipment

• West Townsend, MA Sat., September 13, 2014 For: Public Auction Estate of Roy D. Shepherd

WILSON’S AUCTION SALES www.wilsonsauction.com 302-422-3454

• North Franklin, CT September 26 - 27, 2014 For: 2 Day Major Public Equipment Auction

• Lincoln, DE Sat., September 20, 2014 For: Mid-Atlantic Fall Equipment Auction

• Bristol, CT Wed., October 8, 2014 For: Renowned Sand & Gravel Operation Auction • Columbus, OH Thurs., October 16, 2014 For: Area Contractors & Equipment Dealers • Newark, NJ Thurs., October 30, 2014 For: Heavy Construction Equipment & more • South Windsor, CT Fri., November 7, 2014 For: Complete Dispersal – Folsom Construction, LLC

YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Berlin Center, OH Tues., October 21, 2014 For: Construction Equipment, Trucks & Trailers • Darlington, PA Thurs., October 23, 2014 For: Construction Equipment, Trucks & Trailers • Kissimmee, FL February 9-16, 2015 For: 41st Annual – 7 day Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 101

Rental Revenue to Exceed $51B The equipment rental industry in the United States is expected to generate $35.8 billion in revenue and outpace gross domestic product (GDP) by more than four times in 2014, according to the American Rental Association’s (ARA) latest forecast from the ARA Rental Market Monitor. Economic data and analysis for ARA Rental Market Monitor are compiled by IHS Inc., the leading global source of critical information and insight. In the United States, total equipment rental revenue is forecast to grow 7.6 percent in 2014 to reach $35.8 billion, 10.5 percent in 2015 to reach $39.6 billion and another 10.2 percent in 2016 to reach $43.6 billion, surpassing the previous industry record of $36.9 billion in 2007. The growth rate is expected to be 8.9 percent in 2017 and 7.7 percent in 2018, with total rental revenue of $51.2 billion. “The U.S. economy slowed more than expected in the first half of the year, but equipment rental demand has remained strong and rental growth will still handily outperform the overall economy. Looking forward, commercial construction and housing starts will contribute to growth in the construction and industrial and general tool segments,” said Scott Hazelton, managing director of IHS Global Insight.

Over the next two years, the construction and industrial segment and the general tool segment will experience double-digit growth in U.S. rental revenue. In 2015, construction and industrial rental revenue is projected to increase 10.7 percent and general tool 11.7 percent and again in 2016 with increases of 10.4 percent and 11.6 percent respectively. The party and event segment is expected to continue its same steady growth, with revenue increasing 4.2 percent in the United States in 2014 to reach $2.6 billion. The forecast for Canada calls for 5.2 percent growth in 2014 to $4.9 billion, with growth of 6.0 percent in 2015, 6.6 percent in 2016, 3.5 percent in 2017 and 3.6 percent in 2018 to total $5.9 billion at the end of the latest forecast. It also is expected that rental companies in the United States will continue to invest more than 30 percent of their revenue in new equipment over the next five years. Total investment, according to the ARA Rental Market Monitor, is projected to reach $12.1 billion in 2014 and grow to $16.1 billion by 2018. For more information, visit www.ARArental.org. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

2006 CAT D8T

2004 WESTERN STAR 4900FA

2000 CAT 12H

ACCEPTING CONSIGNMENTS THROUGH SEPTEMBER 13TH Find us online:

TN FIRM # 2048

Page 102 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

An Interesting Two Months...

Equipment Leasing and Finance Industry Confidence Eases The Equipment Leasing & Finance Foundation (the Foundation) released the August 2014 Monthly Confidence Index for the Equipment Finance Industry (MCI-EFI) Aug. 21. Designed to collect leadership data, the index reports a qualitative assessment of both the prevailing business conditions and expectations for the future as reported by key executives from the $827 billion equipment finance sector. Overall, confidence in the equipment finance market is 58.9, easing from the previous two months’ indexes of 61.4. When asked about the outlook for the future, MCI-EFI survey respondent Thomas Jaschik, president, BB&T Equipment Finance, said, “The next two months will be very interesting for the equipment finance industry. Will the economy accelerate, as many economists have predicted? Will U.S. business

feel confident in making capital investments? Or, will the economy continue its lackluster recovery? The next 60 days should tell whether this will be a year of exceptional or limited growth for our industry.” August 2014 Survey Results: The overall MCI-EFI is 58.9, easing from 61.4 the previous two months. • When asked to assess their business conditions over the next four months, 18.2 percent of executives responding said they believe business conditions will improve over the next four months, down from 28.6 percent in July. 78.8 percent of respondents believe business conditions will remain the same over the next four months, up from 68.6 percent in July. 3 percent believe business conditions will worsen, unchanged from the previous month. • 21.2 percent of survey respon-

dents believe demand for leases and loans to fund capital expenditures (capex) will increase over the next four months, down from 25.7 percent in July. 75.8 percent believe demand will “remain the same” during the same four-month time period, up from 68.6 percent the previous month. 3 percent believe demand will decline, down from 5.7 percent who believed so in July. • 15.2 percent of executives expect more access to capital to fund equipment acquisitions over the next four months, down from 25.7 percent in July. 84.8 percent of survey respondents indicate they expect the “same” access to capital to fund business, an increase from 74.3 percent in July. No one expects “less” access to capital, unchanged from the previous month. • When asked, 33.3 percent of the executives reported they expect

to hire more employees over the next four months, a decrease from 37 percent in July. 57.6 percent expect no change in headcount over the next four months, down from 60 percent last month. 9.1 percent expect fewer employees, up from 2.9 percent who expected fewer employees in July. • 6.1 percent of the leadership evaluates the current U.S. economy as “excellent,” up from 5.7 percent last month. 87.9 percent of the leadership evaluates the current U.S. economy as “fair,” a slight decrease from 88.6 percent in July. 6.1 percent rate it as “poor,” relatively unchanged from the last four months. • 30.3 percent of the survey respondents believe that U.S. economic conditions will get “better” over the next six months, an increase from 22.9 percent who believed so in July. 66.7 percent of survey respondents indicate they

believe the U.S. economy will “stay the same” over the next six months, a decrease from 74.3 percent in July. 3 percent believe economic conditions in the U.S. will worsen over the next six months, unchanged from last month. • In August, 21.2 percent of respondents indicate they believe their company will increase spending on business development activities during the next six months, a decrease from 25.7 percent in July. 78.8 percent believe there will be “no change” in business development spending, an increase from 74.3 percent last month. None believe there will be a decrease in spending, unchanged from last month. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Kobelco Appoints Hall Vice President of Operations Kobelco Construction Machinery USA appointed Randy Hall as vice president of operations. Hall brings with him to this newly appointed position more than 35 years of experience in the equipment industry and a proven track record in building and managing key relationships with equipment dealerships, national accounts and finance partners. Most recently, Hall served as Kobelco’s national sales manager and was instrumental in establishing the company’s preferred crawler excavator supplier agreements following the company’s brand relaunch in 2013. In this new role, Hall will develop, inspire and engage Kobelco’s team of territory managers, direct all field sales efforts and dealer development initiatives, manage national accounts and finance partnerships and oversee the overall workflow at Kobelco’s headquarters in Houston, Texas. He will work directly with the Kobelco executive management team to support the company’s long term business strategy in an effort to meet sales goals and customer demands, while assisting territory managers with forecasting, inventory suggestions, delivery estimates and overall growth plans to continually improve upon the financial performance of the business. Hall will replace former Randy Hall, vice president of operations, Kobelco Construction Machinery USA.

Vice President of Operations Ron Hargrave who now serves in an advisory role for the company. “KOBELCO is a tried and true brand when it comes to crawler excavators,” said Hall. “I am looking forward to this next chapter in the brand’s development in North America and am thrilled to accept this new role with the company. The entire Kobelco team is extremely dedicated to the company’s continued success. Our internal rallying cry ‘Driven by Passion’ is put into practice every day by every employee. It’s a refreshing and empowering environment to be a part of.” Hall’s leadership and passion for the industry will help fuel Kobelco’s future success. “Without question, Randy is the right person for this position. He will provide exceptional leadership, set clear goals and give positive reinforcement to our team of valued employees and authorized equipment dealerships, creating a high performance work environment,” said Ronald Hargrave, advisor of Kobelco Construction Machinery USA. For more information, call 281/288-8430 or visit www.KOBELCO-USA.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 103

The new way to buy used equipment Low, no-haggle pricing. Inspected. Ready for work. Guaranteed.

2006 Genie Z-60/34 4WD Diesel Articulating Boom Lift – $31,000

2006 JLG 1930ES Electric Scissor Lift – $3,750

BUY ONLINE

2008 JCB 3C 14FT 4x4 Backhoe Loader – $24,500

2007 Ingersoll-Rand P185 185 Compre essor – $,7,500 CFM Airr Compressor

Ter Tere ex AL4000 AL4 2008 Terex Tower – $3,200 $3 Light Tower

Deere 3320 4x4 2008 John Deere Tractor – $12,000 Farm Tractor

2006 Lull 944E-42 Telehandler – $33,000 Telehandler

Equipment featured are a representation of items available on allEquip. Items are sold and added to inventory daily.

Visit Visit allEquip.com

Page 104 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Twenty-One States...

Volvo CE Tier IV Final/Stage IV Engines USDOT Announces Meet Stringent Emissions Legislation Drawing on 180 years of experience and the research strength of the Volvo Group, Volvo Construction Equipment’s Tier IV Final/Stage IVcompliant D4, D6, D8, D11, D13 and D16 diesel engines meet the stringent new EU and U.S. emissions legislation — while also improving fuel efficiency by up to 5 percent over previous models and reducing running costs overall. The V-ACT (Volvo advanced combustion technology) engines feature advanced fuel injection, a more effective air handling system and enhanced engine management, according to the manufacturer. Comprehensively tested in punishing conditions, the Tier IV Final/Stage IV engines have been validated in bench and multi-application field testing to reduce nitrogen oxide (NOx) levels from Tier IV Interim/Stage IIIB levels of 2.0g/kWh to just 0.4g/kWh — an 80 percent decrease — in accordance with the demands of the new legislation, which came into effect in January 2014. To meet these new requirements without dramatically changing the base engine, the majority of Volvo Tier IV Final/Stage IV engines now incorporate selective catalytic reduction (SCR) — a technology that’s already been comprehensively tested in more than one million SCR-equipped Volvo trucks since the system was introduced in 2005. SCR uses an injection of a reagent liquid (a 32.5 percent solution of urea in deionized water) into the exhaust gas flow to convert NOx to nitrogen and water, both of which are found naturally in the air. The reagent liquid is called DEF (diesel exhaust fluid) in the United States and AdBlue in Europe. The system reduces NOx emissions by as much as 95 percent. Along with SCR, the cooled external exhaust gas recirculation (cEGR) system also works to lower NOx by diluting the air in the combustion chamber, which in turn lowers combustion peak temperatures. A variable geometry turbocharger (VGT) on the D13 and D16 or a waste-gated turbocharger on the smaller engines, provides instant torque at low engine speeds — boosting power and enhancing engine performance for greater fuel economy.

$333.9M in Relief for Road Repairs

An L250G wheel loader and A40G articulated hauler put the new Volvo Tier IV Final/Stage IV engines through their paces.

Diesel Particulate Filter The fully automatic diesel particulate filter (DPF) system reduces harmful particulate matter without interrupting machine operation or lowering productivity or performance. Passive regeneration takes place regularly at low exhaust temperatures to oxidize particulate matter. Additionally, particulate matter is incinerated at high temperatures via reset regeneration. This infrequent process does not require any intervention from the operator. The interval between each reset regeneration depends on the application and ambient conditions. An after-treatment control module (ACM) monitors and controls regeneration, ensuring that emissions are successfully reduced. Filter maintenance may be required every 4,500 hours (6,000 hours for D4 through D8) but can be done quickly and easily. The advanced engine management system (EMS), which adapts instantaneously to changes in operation, has been updated with a more powerful processor and software that supports more functions with greater precision and a higher level of control, according to the manufacturer. Put Through Their Paces Volvo CE’s Tier IV Final/Stage IV engines have benefited from more than 80,000 hours of testing in articulated haulers, wheel loaders and excavators, as well as in engine test benches.

Prototype testing also has been done in sub-zero temperatures, extreme heat and at high altitudes. Perfect Harmony Customers benefit from the matched components and perfect harmony between engines and machines. Volvo harmonizes engine output, drivetrain and hydraulics for greater efficiency, performance and productivity. And even though Volvo engines are tailored to suit specific product lines, they are built with common parts, allowing owners to quickly and easily obtain replacement parts for less downtime. The entire range of Volvo CE Tier IV Final/Stage IV engines and Volvo CE machines is backed by the company’s extended service network and range of customer solutions, including DEF/AdBlue management, cost-effective DPF exchange services and Volvo Genuine Parts. For service and maintenance needs, a choice of customer support agreements (CSAs) is available, providing flexibility and cost control, and minimizing machine downtime. The Volvo CareTrack telematics system enables remote monitoring of machine functions — from fuel consumption to service reminders — to improve productivity and efficiency. For more information, visit www.volvo.com.

U.S. Transportation Secretary Anthony Foxx announced $333.9 million in emergency funds from the Federal Highway Administration (FHWA) to help 21 states make repairs to roads and bridges damaged by storms, floods and other unexpected events. “We are making good on our promise to help residents in states affected by natural disasters and other emergencies,” said Foxx. “These funds are part of our ongoing commitment to Americans all across the country to make sure that the damaged roads and bridges they depend on to get to work or deliver goods are restored as quickly as possible.” Among the states receiving federal funds, Washington will receive $35 million for repairs to a section of SR 530 severely damaged by a heavy mudslide in March. Minnesota and Colorado will also receive funding to fix

“Getting life back to normal in these areas is our top priority and safe, functional transportation is at the heart of that.” Gregory Nadeau Federal Highway Administration

substantial damage to roads and bridges caused by unusually heavy rains within the last year. In addition, tens of millions in emergency relief funds will address a backlog of damages made prior to 2012. “These funds will help states restore their transportation networks,” said Acting Federal Highway Administrator Gregory Nadeau. “Getting life back to normal in these areas is our top priority and safe, functional transportation is at the heart of that.” FHWA’s Emergency Relief program reimburses states for expenses associated with damage from natural disasters or other emergency situations. The funds, which come from the U.S. Treasury’s General Fund and not the Highway Trust Fund, help to pay for reconstruction or replacement of damaged highways and bridges, to establish detours and replace guardrails or other damaged safety devices. To see the USDOT’s FY 2014 Emergency Relief Funding list, which includes the states receiving money and for which projects, visit www.constructionequipmentguide.com/USDOT-Announces-$333.9M-in-Relief-forRoad-Repairs-in-21-States/23362. (This story also can be found on (This story also can be found on Construction Construction Equipment Guide’s Web Equipment Guide’s Web site at www.constructionequipsite at www.constructionequipment- mentguide.com.) guide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 105

Page 106 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Unreserved public auctions

37,1

items in North America Up tto o 100% fin financing ancing av available! available! R Rates ates a ass lo low wa ass 5.99%

J DEERE 850 5 K 2012 JOHN PTEMBER 26 KANSAS CITTY, MO – SEP CA ATERPILLAR D10R ST. LOUIS, MO – SEPTEMBER 30

CA ATERPILLAR 325C 5 L MINNEAPOLIS, MN – SEP PTEMBER 19

CA ATERPILLAR D7H LGP MINNEAPOLIS, MN – SEP PTEMBER 19

2014 CA ATERPILLAR 329EL ST. LOUIS, MO – SEPTEMBER 30

2011 HITACHI ZX350 35 LC-3 3 KANSAS CITY, Y, MO – SEPTEMBER 26

FFeatured eatured u upcoming pcoming auctions auctions

FFeatured eatured it items ems in Nor North th America America

Bid w with ith cconfidence onfidence

Minne Minneapolis, apolis, MN Gi Gillette, llette, WY Na Nashville, shville, TN FFort ort Worth, Worth, TX Ka Kansas nsas C City, ity, M MO O St St.. LLouis, ouis, MO C Chicago, hicag go, IL Columbus, Columbus, OH Duluth, Duluth, MN

650+ 390+ 300+ 145+ 230+ 270+ 155+ 300+

▸ No minimu minimum mb bids ids or rreserve eservve prices prices ▸ Up tto o 100% fin financing ancing available available ▸ Ins Inspect pect and b bid id in per person son or on online line

September September 19 19 Sept September ember 23 23 Sept September ember 23 23 Sept September ember 2 24–25 4–25 Sept September ember 26 Sept September ember 30 Oct October ober 2 Oct October ober 7 Oct October ober 8

ex excavators cavators crawler crawler tractors tractors wheel lo loaders aders mot motor or gr graders aders loader loader backhoes backhoes sskid kid steer steer lo loaders aders cranes cra nes du dump mp trucks trucks and much much more... more...

rbauction.com rb auction.com | 1.800.2 1.800.211.3983 11.3983 Motor Motor Ve Vehicle ehicle Dealer Dealer License #DLR25867, #DLR25867, Au Auctioneer ctioneer Frederick Frederick Vilsmeier Vilsmeier # 7013015, Au Auctioneer ctioneer Ed Eddie die R. Gr Graham aham #2237 , Au Auctioneer ctioneer E. R. Butch Butch Graham Graham # 6018, Auction Auction Firm License # 444.000193, Auctioneer Auctioneer Gr Greg eg M. Highsmith Highsmith # 441.000865, Au Auction ction Firm License #6980, Au Auction ction Firm License # 444.000193, Auctioneer Auctioneer Greg Greg M. Highsmith Highsmith # 441.000865, Motor Motor Vehicle Vehicle Dealer Dealer License #DLR25867, #DLR25867, Auctioneer Auctioneer Ed Eddie die R. Gr Graham aham # 7013018, Au Auction ction Business Business License #AB-148, #AB-148, Auctioneer Auctioneer Gregory Gregory S. S. Fuqua Fuqua #1553

Selll y Sel your our equipment Call C all today–any today–any nu number mber of items items accepted. accepted.

More it More items ems added d daily aily Visitt rb Visi rbauction.com auction.com tto o see al alll auctions and u up-to-date p-to-date li listings. stings.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 107

Absolute public auction

Columbus, Ohio October 7 (Tuesday) | 8 am

CATERPILLAR D6N XL

2005 VOLVO EC160BLC

2007 TEREX TA40 6x6

1 OF 4 – CATERPILLAR 561C

1 OF 2 – 2010 JOHN DEERE 333D

2005 JOHN DEERE 304J

Location

Bid with confidence

200 Ritchie Dr., South Vienna, OH 45369

▸ No minimum bids or reserve prices ▸ Up to 100% financing available ▸ Inspect and bid in person or online

Featured items Pipelayers Excavators Crawler tractors Wheel loaders Loader backhoes Multi terrain loaders and much more... CASE 580SL 4x4

rbauction.com | 937.568.9500 Auction Firm # 2008000166 / Auctioneer: Frederick R. Vilsmeier # 2004000137 / Auctioneer: Gregory Scott Fuqua # 2002000068 / Auctioneer: Eddie R. Graham # 62198943559 / Auctioneer: Kevin L. Perry 2002000227 *OAC. Terms and conditions apply.

Sell your equipment Call today–any number of items accepted.

More items added daily Visit rbauction.com to see all auctions and up-to-date listings.

Page 108 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Navigational Clearance to Be More Than 800 Ft. on Span BRIDGE from page 78

spans are 140 and 235 ft. (42.7 and 71.6 m); in Ohio the spans are 110, 144, 186 and 144 ft. (33.5, 43.9, 56.7 and 43.9 m). The approach bridges are founded on small diameter drilled shafts (Kentucky) or steel pile (Ohio). Fuller noted that the main structure of the bridge will have 120 cables. There will be 15 pairs in the Ohio back span, 30 pairs in the main span, and 15 pairs in the Kentucky back span. The strands are made of steel, and the number of strands varies in each of the cables from a minimum of 14 located in the cables nearest both towers to a maximum of 35 in the cables farthest from the towers on the back span sides. The cables at the midspan contain 31 strands each. “There is one abutment and two piers on the Kentucky approach; two towers in the river; and four piers and one abutment on the Ohio approach,” Fuller said. “Pier 2 on the Kentucky approach is actually located in the river. All abutments, piers and towers will be cast-in-place, reinforced, concrete. The tallest pier is Pier 2 at 80 ft. (24.4 m), and the widest pier is Pier 1 at 60 ft. (18 m). The foundations for Towers 3 and 4, as well as Piers 2 and 5, are cast-in-place, reinforced, concrete footings on drilled shafts. Pre-cast cofferdams are being used for Towers 3 and 4, and a conventional cofferdam was used for Pier 2.” The navigational clearance for the bridge will be 805 ft. (245 m). “There are always challenges when constructing a project of this magnitude, and they can be especially great when constructing over a sizeable river crossing like the Ohio River,” Fuller said. “Many of these challenges were realized during the design phase, with regards to placement of the towers, the skew or alignment of the bridge from approach to approach, and the touchdown locations in both communities. And with the numerous underground utilities, railroad crossings and waterway concerns, there were many key permit and right-of-way issues that needed to be addressed prior to construction. “However, the contractors recognized alternative construction methods, proposing and implementing changes to the project and sequencing that were not only unique, but would prove to be feasible, economical, and efficient. More specifically, Brayman crews have used pre-cast coffer cells rather than the typical, large steel cofferdam to build the tower foundations. The use of pre-cast stay anchor blocks allow the contractors to immediately install the cable stay, and specially designed falsework that reduces the

number of form travelers from two to one allows for the main span to be cast in place in a segmental, cantilevered approach. While implementing these construction methods, they have been able to accelerate some phases of the staging and create a safer work environment.” Major subcontractors for the project include J & B Steel Erectors Inc., Hamilton, Ohio, for reinforcing steel; Boone Coleman Construction Inc., West Portsmouth, Ohio, for roadway items; and West End Electric Company Inc., Portsmouth, Ohio, for electrical items. Major equipment used on the job includes a Manitowac 888 200ton (181 t) crane, two Terex CC700 275-ton (249 t) cranes, two Manitowac 222 100-ton (91 t) cranes, an American 9299 165-ton (150 t), a Steven M. Hain 450K T3 drill, a PileCo D1242 diesel hammer, an Ice 44B vibratory pile driver/extractor, and an Ice 416 vibratory pile driver/extractor. Quantities of steel include 4.8 million lbs. (2.2 million kg) of epoxy coated reinforcing steel, 3.2 million lbs. (1.5 million kg) of structural steel, 154,266 lbs. (69,974 Connecting the cities of Ironton, Ohio, and Russell, kg) of post tensioning Ky., the Ironton-Russell Bridge replacement project tendons (strand), and entails the construction of a cast-in-place concrete, 183,551 lbs. (83,257 cable-stayed bridge over the Ohio River with struckg) of post tensioning tural steel approaches and reinforced concrete edge girder superstructure on the main span. bars Concrete used includes a total of 24,395 cu. yd. (18,651 cu m), with 5,855 cu. yd. (4,476 cu m) of 4,500 psi concrete in the micro silica modified concrete superstructure, 5,732 cu. yd. (4,382 cu m) of 6,500 psi concrete in the cable stayed concrete overlay, 5,640 cu. yd. (4,312 cu m)of 6,500 psi concrete in the main span piers and towers, 1,563 cu. yd. (1,195 cu m) of 4,500 psi concrete in the superstructure (deck and approaches), 4,109 cu. yd. (3,142 cu m) of 4,000 psi concrete in the footings, and 1,496 cu. yd. (1,144 cu m) of 4,000 to 4,500 psi concrete in the approaches. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

According to Kathleen Fuller, public information officer of ODOT, the original interim completion date (when the bridge will be open to traffic) was targeted for mid- to late-fall of 2015.

Final completion for the entire project, which includes demolition of the existing bridge, will follow after the new bridge is open.

ODOT awarded the contract, valued at $81.3 million, to Brayman Construction Corporation of Saxonburg, Pa., in January 2012.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 109

Highlighting Success of Women Crucial WOMEN from page 74

Wilkerson. “Once women know there’s a place for them, and something they really can do well, they love it.’’ The Department of Labor is stepping up its involvement with plans to award $100 million in grants this year for apprenticeship programs that expand opportunities for women and minorities. Some of the grants targeting women call for providing child-care assistance when needed. “The reality is that the face of apprenticeship in the construction industry has been white male,’’ Labor Secretary Thomas Perez said in an interview. “We’re working to ensure the future reflects the face of America.’’ A crucial step, Perez said, is to raise awareness about the dearth of women in construction, and to highlight the successes of the relatively small number of women who’ve thrived in the sector. “Women are good at this,’’ he said. “They’ve punched a ticket to the middle class and speak with great pride of the barriers they’ve overcome. They are the pioneers, and they want the cavalry to come.’’ Among those impatient with the slow pace of change is Susan Eisenberg, a resident artist/scholar at Brandeis University who worked as a construction industry electrician for 15 years, starting in 1978. She published an acclaimed book in 1998, titled “We’ll Call You If We Need You,’’ based on her interviews with other women in construction. Eisenberg has argued that women’s share of the construction workforce should be far higher than it is — perhaps 25 percent instead of 2.6 percent. “It’s out of step with so much of what’s going on,’’ she said. “Women are now much more physically fit

“Ending blatant discrimination that excludes women from working in construction and increasing their representation in the industry is long overdue.’’ Donna Lenhoff Office of Federal Contract Compliance Programs

than my generation. They’re 15 percent of the military.’’ Eisenberg suggests that both management and unions should be trying harder to recruit women. And she said government agencies could improve the situation with tougher enforcement of anti-discrimination policies. “People who think they will be held accountable will change,’’ she said. Under current conditions, she said, women may be accepted as apprentices, but then cut short their careers because of discrimination. “We’ve moved from a closed door to a revolving door,’’ Eisenberg said. In the recent National Women’s Law Center report, New Yorker Patricia Valoy, who studied construction management and engineering at Columbia University, described sustained harassment that she encountered during a construction apprenticeship. “Men would stop their work to stare and wolf whistle,’’ Valoy recounted. “On a few occasions I got called a ‘bitch’ for refusing to reply to inappropriate remarks... I worked on the site for a year until the stress of constantly being harassed, belittled and intimidated was not worth the effort.’’ The Labor Department is well aware of the harassment problem, and its Office of Federal Contract Compliance Programs has

pledged to crack down on federal contractors who fail to prevent serious abuses. “Ending blatant discrimination that excludes women from working in construction and increasing their representation in the industry is long overdue,’’ wrote Donna Lenhoff, the compliance office’s senior civil rights adviser, in a blog post. In one case this year, the office determined that three female carpenters with a Puerto Rico construction company were sexually harassed, subjected to retaliation, and denied work hours comparable to those of their male counterparts. At times, the company failed to provide the women with a restroom, and they had to relieve themselves outdoors, the office said. Under a conciliation agreement, the company agreed to pay $40,000 to the three workers and develop anti-harassment policies. In another recent case, involving L&M Construction of Capitol Heights, Md., federal investigators found pervasive sexual harassment, including lewd acts, sexual gestures and propositions directed at female employees. The federal office said the company unlawfully fired nine employees, including several men, for opposing the hostile work environment at sites in the Washington, D.C., area. The company agreed to pay back wages to the fired workers

and pay for an assessment of its employment and antiharassment policies. Statistically, it appears that progress is being made. Construction consistently rates among the top 10 employment sectors with the most sexual-harassment allegations filed with the Equal Employment Opportunity Commission, but the numbers have declined in recent years — from 416 in 1999 to 132 in 2012. “I love my trade very much. I love watching nothing become something,’’ union leader Mary Battle told the National Women’s Law Center. “They’ll harass and belittle you... But we must stick with it, or else things won’t ever get better for women on the job.’’ (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

$335$,6$/ 6(59,&(6 From the Company You Already Trust with Your Equipment

You Need to Know the Real Value of Your Equipment!

Do you have adequate insurance? Do you need to refinance? Is each piece worth your investment? Which pieces should be replaced? Contact I.R.A.Y.’s GPPA Certified Appraisal Team Get answers to your questions Call: (877) or (320) 968-7230 Email: iray@iraymn.com

www.iraymn.com

Page 110 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALEX PARIS CONTRACTING CO INC ................................................9 ALLIED CONSTRUCTION PRODUCTS ............................................87 ALLU GROUP ....................................................................................43 AMERICAN STATE EQUIPMENT ........................................................7 ANACONDA USA ................................................................................93 ARING EQUIPMENT CO INC ............................................................15 ARTIC SNOW & ICE CONTROL ........................................................43 ASC CONSTRUCTION EQUIP USA ........................................10,11,27 BANDIT INDUSTRIES INC ................................................................89 BARGAINS ....................................................................................97,98 BOBCAT ENTERPRISES....................................................................26 BOSS PRODUCTS ............................................................................65 CASE CONSTRUCTION ....................................................................31 CATERPILLAR INDUSTRIAL ........................................................80,81 CEG SCALE MODELS........................................................................38 CK POWER ........................................................................................17 CLASSIFIEDS ....................................................................................96 CLEARSPAN FABRIC STRUCTURES ..............................................39 CONSTRUCTION EQUIPMENT GUIDE OFF ROAD TRUCKS PROMO ..................................................44 NEWSLETTERS ........................................................................94 WANTED ....................................................................................99 AUCTION TRIPLE BUY............................................................105 SHOPPING FOR USED EQUIPMENT ......................................64 DOOSAN INFRACORE AMERICA CORP ....................................66,67 DOOSAN PORTABLE POWER ..........................................................77 DOPPSTADT ......................................................................................88 DYNAPAC............................................................................................71 ERB EQUIPMENT ..............................................................................13 FABCO EQUIPMENT INC ....................................................................2 FARM-RITE EQUIPMENT INC............................................................56 FELLING TRAILERS ......................................................................52,53 FINKBINER EQUIPMENT CO ..............................................................7 FLANGE LOCK ..................................................................................21 FLUID CONTROL SERVICES ............................................................39 FOLEY EQUIPMENT CO ....................................................................33 FURY MOTORS ..................................................................................51 GARY CARLSON EQUIPMENT..........................................................14 GRINDERCRUSHERSCREEN.COM ..................................................84 GROVE WORLDWIDE ......................................................................111 HINIKER NORTHEAST ......................................................................63 HOWELL TRACTOR & EQUIPMENT CO ........................................112 HYDRAULICIRCUIT TECHNOLOGY..................................................45 ILLINOIS TRUCK & EQUIPMENT ........................................................3 IRAY AUCTION..................................................................................109 IROCK CRUSHERS ............................................................................92 IRONPLANET....................................................................................103 JEFF BELZERS CHEVROLET ......................................................50,55 JOB RENTALS AND SALES LLC ......................................................17 JOHN DEERE ....................................................................................57 KAWASAKI CONSTRUCTION MACHINERY......................................69 KLEEMAN............................................................................................85 KOMATSU AMERICA CORP................................................18,19,72,73

KPI-JCI ................................................................................................82 KUBOTA ..............................................................................................76 LEADING EDGE ATTACHMENTS INC ..............................................42 MATEJCEK IMPLEMENT....................................................................25 MCCANN INDUSTRIES INC............................................................6,37 METSO MINERAL CRUSHING ..........................................................83 METSO MINERAL SCREENING ........................................................95 MID COUNTRY MACHINERY ............................................................32 MIDWEST READY MIX & EQUIPMENT ............................................23 MUSTANG MFG ..................................................................................70 NITKE SALES INC ............................................................................109 NORAM ..........................................................................................58,59 NORTRAX-MIDWEST ....................................................................17,21 NPK CONSTRUCTION EQUIPMENT INC..........................................35 NTS TIRE SUPPLY ............................................................................50 PEMBERTON INC ..............................................................................42 PINNACLE CRANES ..........................................................................37 POWERSCREEN MW DEALER ........................................................90 PURPLE WAVE INC..........................................................................101 RANSOME EQUIPMENT SALES LLC................................................99 RDO EQUIPMENT/SCHARBER EQUIPMENT ..................................16 RITCHASON AUCTIONEERS LEBANON TN ..........................................................................101 RITCHIE BROS. AUCTIONEERS COLUMBUS OH ......................................................................107 UNRESERVED PUBLIC AUCTION..........................................106 ROAD BUILDERS MACHINERY......................................................6,29 ROGERS BROTHERS CORP ............................................................54 ROLAND MACHINERY INC ..................................................................5 RTL EQUIPMENT INC ........................................................................92 SANDVIK MINING & CONSTRUCTION ............................................45 SENNEBOGEN ..................................................................................91 SMITHCO ............................................................................................54 STAR EQUIPMENT LTD ......................................................................6 SUPERIOR INDUSTRIES ..................................................................84 TEREX CORPORATION ....................................................................28 TEREX CRANES ................................................................................75 TEREX FUCHS ..................................................................................86 TITAN RENTS ....................................................................................26 TOWMASTER INC ............................................................................49 TRUCK UTILITIES ..............................................................................65 WHAYNE SUPPLY CO........................................................................39 ZIPS TRUCK EQUIPMENT ................................................................50 OHIO STATE SUPPLEMENT AIR EQUIPMENT RENTAL CORP ........................................................5 COLUMBUS EQUIPMENT CO ............................................................8 EQUIPMENT CORP OF AMERICA ......................................................5 JCB OF OHIO........................................................................................2 MURPHY TRACTOR & EQUIPMENT CO ............................................7 RUDD EQUIPMENT ..............................................................................3 THE MCLEAN CO ..............................................................................4,6

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 13, 2014 • Page 111

The GMK6300L all-terrain crane At Grove, we provide high-performance features, reliable 24/7 support and a quality product lineup – because cranes are all we do. With 17 all-terrain models ranging from 40-450 USt, we’ve got a crane to handle any jobsite. Featured is the GMK6300L – its 350 USt capacity, 263 ft. boom, Allison transmission and MEGATRAK™ suspension system are ideal for a wide range of applications and will keep you working.

Tilt cab

MEGATRAK™

Removable outrigger box

LEADERS IN LIFTING For more information, visit www.manitowoccranes.com

Kirby Smith Machinery Inc. 12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700

6715 W. Reno Oklahoma City, OK 73127 405/495-7820 Kansas City, KS 913/850-6300 877/851-5729

Cleveland Crane & Shovel Sales, Inc. 26781 Cannon Road Cleveland, OH 44146 440/439-4749 800/362-8494 Fax: 440/439-2177 aforepaugh@ craneandshovel.net www.craneandshovel.net

Walter Payton Power Equipment LLC 930 W 138th Street Riverdale, IL 60827 708/656-7700 Fax: 708/532-1273 25210 Brest Road Taylor, MI 48180 734/947-9250 Fax: 734/947-9260

920 S State Road 39 Lebanon, IN 46052 765/482-4145 Fax: 765/482-4928 3400 Claremont Avenue Evansville, IN 47712 812/422-6912 Fax: 812/422-6982

Aspen Equipment Company www.aspenequipment.com 1525 S.E. Cortina Dr. Ankeny, IA 50021 515/965-1000 Fax: 515-965-1790 11475 S. 153rd St. Omaha, NE 68138 402/894-9300 Fax: 402-894-9302

Page 112 • September 13, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE