Midwest 20 2015 by Construction Equipment Guide

Published Nationally

$3.00

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 4

Midwest Edition

www.constructionequipmentguide.com

September 26, 2015 • Vol. IXX • No. 20 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910

Inside

Rieth-Riley Wraps Up $92M South Bend Work By Irwin Rapoport

Matt Deitchley, communications director, INDOT photo

CEG CORRESPONDENT

Roland Machinery Holds Appreciation Dinner…12

Great Lakes Timber Professionals Hosts Event…18

State Fair Showcases Latest Equipment…22

Table of Contents ................4

The Rieth-Riley Construction Co., Inc. (RR) was awarded the first contract (2010) of the multiyear project to upgrade the northern corridor of U.S. 31in South Bend Indiana (U.S. 31 Major Moves) and it is finishing the last contract to complete the job. The contractor has secured five of the eight contracts awarded for the project, all worth a total of $92 million. RR’s work consists of earthmoving, underground, sub-grade treatment, aggregate, concrete paving and asphalt paving. The final contract will be completed in the fall. The project, initiated by the Indiana Department of Transportation (INDOT), is to build a new section (alignment) of the highway — 22 mi. (35.4 km) — in St. Joseph and Marshall counties. The new alignment starts in Marshall County, just south of U.S. 6 and goes into St. Joseph County, where it ties into the U.S. 20 bypass. The old U.S. 31 ran through a few smaller communities and it intersected with several country roads, which required having traffic lights, that while addressing safety issues, slowed down the flow of traffic. The goal of the work is to have a continuous flow of traffic and address the needs of a growing residential community and commercial sector. The new north-south road will continue to be two lanes in each direction. “The project was initiated to reduce congestion on U.S. 31 by providing the capacity to meet the forecasted travel demand for 2030 at an acceptable level of service,” said INDOT project engisee CORRIDOR page 30

The Rieth-Riley Construction Co., Inc. (RR) was awarded the first contract (2010) of the multi-year project to upgrade the northern corridor of U.S. 31in South Bend Indiana (U.S. 31 Major Moves) and it is finishing the last contract to complete the job.

Court Reverses Regulators’ Decision to Grant Certificate By Amy Forliti ASSOCIATED PRESS

MINNEAPOLIS (AP) The Minnesota Court of Appeals has reversed regulators’ decision to grant a certificate of need for the proposed Sandpiper oil pipeline, saying that state regulators must complete an environmental impact statement before the certificate can be issued. The appeals court sent the issue back to the

Minnesota Public Utilities Commission to conduct an environmental review and reconsider whether a certificate should be granted. Minnesota regulators granted the certificate in June, saying the $2.6 billion, 610-mi. (981 km) pipeline from North Dakota’s Bakken oil fields to Superior, Wisc., was necessary and in the public interest. A lengthy environmental review of Enbridge Energy’s project was set to take place as offisee COURT page 88

Snow & Ice Section ......37-43 Off-Road Trucks Section ........ ......................................55-65 Paving Section ..............71-84 Auction Section..........90-101 Business Calendar ..........100 Advertisers Index ............102

Work Unearths Pieces of Davenport’s Past By Brian Wellner QUAD-CITY TIMES

DAVENPORT, Iowa (AP) Dig deep enough underneath Davenport’s streets, and a piece of the past is revealed. Since closing Harrison Street to traffic on Aug. 17, construction crews have shaved off several inches of asphalt, unrav-

eling a ribbon of history from the Hilltop to downtown. There are reminders of Davenport’s German heritage and breweries long ago shut down. Local historian Karen Anderson said Harrison Street once was called “The Trench.’’ She explains why. In the late 1800s, several brew-

eries, like Frahm’s at 6th Street, piped their putrid, sour waste from the grain-cooked beer making out into Harrison’s gutters. The process required 10,000 bushels of barley and 800 pounds of hops and churned out 14,000 barrels of beer each year, the Quad-City Times reported. “Since there were no city sew-

ers, the fly-infested fomenting slurry mash lazily oozed out of the brewery and made its slow descent down along the ditch beside the public roadway toward the river, leading locals to more appropriately refer to it as `The Trench,’’’ Anderson said. “It left behind such an awful stench.’’ see DAVENPORT page 100

Page 2 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

PROVIDING THE BEST IN

USED EQUIPMENT

Wisconsin & Upper Michigan Operations

2006 257B . . . . . . . . . . . $21,500 2012 CatCat 242B3 ....................................$27,900

2006 Cat 257B . . . . . . . . . . $21,500 2005 Bomag 135AD ...............................$15,500

2006 . . . . . . . . . . . $21,500 2006 CatCat 735257B ........................................$199,000

2006 257B . . . . . . . . . . . $21,500 2003 CatCat 320CL......................................$59,500

SRS01747, EROPS, 2 Speed, s/n S/N SLK05074, 2,035 Hrs Cab Heat, Hyd QC Cab Heat, HydHrs QC Aux Hyd, 668 2,035 Hrs Cab Heat, Hyd

s/n SLK05074, 2,035 Hrs CabHrs, Heat, Hyd QC S/N 101650121687, 6185 OROPS, Heat,Asphalt Hyd QCRoller DoubleCab Drum, 2,035 Hrs Cab Heat, Hyd

S/NSLK05074, B1N00486, 3,769 A/C, s/n 2,035 HrsHrs, CabEROPS, Heat, Hyd QC tailgate, Cabtires Heat,good Hyd 26.5 QC X 25 2,035 Hrs Cab Heat, Hyd

PAB00858, Hrs, EROPS, s/nS/N SLK05074, 2,03510,578 Hrs Cab Heat, Hyd QC Q Cplr, Aux Cab Heat, HydHyd QC 2,035 Hrs Cab Heat, Hyd

2006 . . . . . . . . . . . $21,500 1999 CatCat 951257B ..........................................$12,000

2006 Cat 257B . . . . . . . . . $21,500 2006 Kobelco SK480. .............................$59,500

2006 257B . . . . . . . . . . . $21,500 2006 CatCat 966H ....................................$140,000

2006 CatDeere 257B670G . . . . ..........................CALL . . . . . . . $21,500 2010 John

S/N fair,Hyd bucket, s/n86J02337, SLK05074, undercarriage 2,035 Hrs Cab Heat, QC OROPS, hrs unknown Cab Heat, Hyd QC 2,035 Hrs Cab Heat, Hyd

S/Ns/n YS06U0571, EROPS, Stick, SLK05074, 9187 2,035Hrs, Hrs Cab Heat,Long Hyd QC Bucket, CabUndercarriage Heat, Hyd QC Fair 2,035 Hrs Cab Heat, Hyd

S/Ns/n A6G00225, A/C, SLK05074,8535 2,035Hrs, HrsEROPS, Cab Heat, HydGP-bkt, QC tires good, engine rebuilt at 7422 hours Cab Heat, Hyd QC 2,035 Hrs Cab Heat, Hyd

S/N 2,035 628277, Hrs, Hyd QC s/n SLK05074, Hrs4283 Cab Heat, Heat, Hyd QC EROPS,Cab Snow Wing, Tires Good 2,035 Hrs Cab Heat, Hyd

1985 CAT 140G ......................................$54,000 2006 Cat 257B . . . . . . . . . . . $21,500

2011 CAT TL642 ....................................$56,500 2006 Cat 257B . . . . . . . . . . . $21,500

2012 CAT TL1055 2006 Cat 257B..................................$88,000 . . . . . . . . . . . $21,500

1999 D6M LGP...............................$51,750 2006CatCat 257B . . . . . . . . . . $21,500

S/N 72V08774,2,035 EROPS, BALLOON, s/n SLK05074, Hrs TIRES Cab Heat, Hyd QC BLADE Cab LINKAGE Heat, Hyd GOOD QC 2,035 Hrs Cab Heat, Hyd

S/N TBK01179,2,035 CABHrs W/AC, 1500 HOURS s/n SLK05074, Cab Heat, Hyd QC Cab Heat, Hyd QC 2,035 Hrs Cab Heat, Hyd

S/N CABHrs W/AC, STABILIZERS, s/nTBM01503, SLK05074, 2,035 Cab Heat, Hyd QC FORK Cab 50' Heat, Hyd QC 2,035 Hrs Cab Heat, Hyd

S/Ns/n 2RN00542, Hrs,Cab EROPS, PAT QC blade, SLK05074,10,370 2,035 Hrs Heat, Hyd winch, rearCab screen, carriage good Heat,under Hyd QC 2,035 Hrs Cab Heat, Hyd

2006 257B . . . . . . . . . . . $21,500 2011 CatCat 908H ......................................$69,500

2006 . . . . . . . . . . . $21,500 2005 CatCat D6R257B ........................................$99,500

2006 257B . . . . . . . . . . . $21,500 2012 CatCat 262C2......................................$32,500

2006 . . . . . . . . . . . $21,500 2005 JDCat 624J257B ........................................$67,500

S/N EROPS, Bucket and s/nLMD01541, SLK05074, 2,035 Hrs Cab Heat, HydForks QC Cab Tires Heat, Good, Hyd QCQ Cplr Included, 2,035 Hrs Cab Heat, Hyd

S/N EROPS, s/nADE00939 SLK05074, HRS 2,0359795 Hrs Cab Heat,UC HydGood, QC Cab Heat, QC S Blade Good,Hyd Drawbar 2,035 Hrs Cab Heat, Hyd

S/N 2847Hrs Hrs,Cab EROPS, AC, QC Case s/nTMW00469, SLK05074, 2,035 Heat, Hyd Cab Heat, Hyd QC 2 Tires Poor Control, 2 Speed, 2 Tires Good 2,035 Hrs Cab Heat, Hyd

S/NSLK05074, 595206, 13,856 Hrs,Cab EROPS, s/n 2,035 Hrs Heat, Bucket Hyd QC Cab Heat, Hyd QC 2,035 Hrs Cab Heat, Hyd

Wisconsin & Upper Michigan Operations

800.353.1944 ... For Used Equipment 877.754.4477.... For Used Work Tools & Attachments 414.461.9100 ... In WI and Upper Michigan

Used Equipment: Jeff Speer or Wes Ensrud Used Work Tools & Attachments: John Riechers 11200 W. Silver Spring Rd., Milwaukee, WI 53225

www.fabickcat.com Hundreds of machines. Listings updated daily.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 3

2010 Kobelco SK260LC LR-8 .. $124,500

2012 Kobelco SK140SRLC ... $92,500

2013 Caterpillar M322D ....... $249,500

2008 Kobelco Midi 80CS ............ $62,500

Cab with A/C, FPT F4HE9684C J1, Tier 3 190HP diesel, 31.5” pads, 27’ 1” stick, pattern control, 60’ reach, 60,000 lbs., 2,427 hrs. ................. #KOB081

A/C, 94HP Tier 3 diesel, INDR, 24” pads, 9’ 4” stick, 19’ 7” dig depth, additional counterweight, 32,600 lbs., pattern control, aux. hydr., 1,166 hrs. ........ #KOB148

A/C, 173HP P, V VA A boom, 8’’ 2” stick, 20’’ 7” dig depth, de multi-function hydrr.,., anti drift valves, roading pkg., twist-a-wrist, a-wrist, Wain Wain Roy quick coupler & XLS 36” bucket, 47,400 lbs., 668 hrs . #11028

A/C, 56HP Tier i 4, INDR, 17.5” 7.5” rubber tracks, 7’’ stick, 15’’ 3” dig depth, 17,600 lbs., 8’’ 2” 2 pushblade, swing boom, aux. hydrr., pattern control, 1,731 hrs. ............................... #KOB175

Illinois T Truck & Equipment • 320 Briscoe Drive, Morris, Illinois 60450 rental@iltruck.com sales@iltruck.com • www www.iltruck.com .iltruck.com • (815) 941-1900

Page 4 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWesT eDITIon

In ThIs Issue

18 12

To r e a d t he s e s t o ri e s a nd ma ny m o re , v is it w w w . co n s t r u ct io ne q ui pm e nt g uid e . co m

specIal secTIon 55 OFF-ROAD TRUCKS Be sure to check out this special section! Keep up to date with the latest information on off-road trucks.

feaTures 12 ROLAND MACHINERY COMPANY HOSTS APPRECIATION DINNER On Sept. 11 Roland Machinery Company held a customer appreciation dinner at its Escanaba, Mich., branch after the 70th annual logging and heavy equipment expo closed for the day.

68 LESS THAN 30 PIECES OF WTC STEEL REMAIN In an airplane hangar at New York’s Kennedy Airport, fewer than 30 pieces of steel remain from the debris recovered after terrorists flew hijacked planes into the World Trade Center’s twin towers on Sept. 11, 2001.

68 GRA PLANS TO INCREASE THE PROFILE OF EQUIPMENT RENTAL AROUND THE WORLD

Circulated Throughout

Founder, Publisher & CEO Midwest Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Main office

Toll Free Fax Web site Editorial e-mail Advertising e-mail For advertising rates Contact

SERIES AT EXPO John Deere and Nortrax introduced the new L&M Series forestry equipment at the 70th annual Great Lakes Logging & Heavy Equipment Expo, Sept.10 to 12 in Escanaba, Mich.

18 GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO TURNS 70 The Great Lakes Timber Professionals held its 70th annual Great Lakes Logging & Heavy Equipment Expo Sept. 10 to 12 at the U.P. State Fairgrounds in Escanaba, Mich.

26 UTILITY EXPLORES OPTION OF USING DAM FOR ELECTRICITY A power utility is considering using a Dubuque dam to generate electricity, part of a nationwide move toward use of renewable energy.

26 DOOSAN COMMUNITY SERVICE YIELDS 6,500 POUNDS OF FOOD Doosan Portable Power employees recently participated in the “Doosan Day of Community Service” — a company-wide volunteer effort that celebrates ongoing partnerships with communities in North America where Doosan Infracore companies do business. Doosan Portable Power is proud to have participated in the event to help make a positive impact in the Statesville, N.C., community.

26 CEMEN TECH MARKS 9/11 WITH COMMITMENT TO HIRE VETERANS Cemen Tech, a manufacturer of mobile concrete mixing systems, announced that it has partnered with Home Base Iowa and Employer Support of the Guard and Reserve (ESGR). The company has committed to hiring veterans who are transitioning out of service to the country and back to civilian life over the next three years.

Joseph S. McKeon • Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

Kent Hogeboom National Sales Manager 315/866-1423 800/988-1203 315/866-1379 e-mail khogeboom@cegltd.coom

Toll Free Fax

JCB recently introduced the “master technician” program to all dealerships in the North American network.

Contact

94 RITCHIE BROS. AUCTION DRAWS

Toll Free Fax

MORE THAN 875 PARTICIPANTS

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com

773/769-4090 800/632-0233 773/769-4280 e-mail jmckeon@cegltd.com

NORTH AMERICA

14 JOHN DEERE, NORTRAX INTRODUCE NEW L&M

Edwin M. McKeon Sr. Joseph S. McKeon Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Tom Weinmann Cathy Printz

Toll Free Fax

The Global Rental Alliance (GRA), made up of seven peer equipment rental associations from throughout the world, held its mid-year meeting via webinar in late-August with executives of member associations present.

86 JCB BRINGS MASTER TECHNICIAN PROGRAM TO

• North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

Ed Bryden • Central and Eastern Indiana • Michigan • Ohio • Kentucky

440/243-9690 800/810-7640 440/243-9691 e-mail ebryden@cegltd.com

More than 875 bidders participated online and in person at Ritchie Bros. Auctioneers’ multi-million dollar unreserved public equipment auction in Youngstown, Ohio, on Sept. 2.

Contact

98 IRAY SALE FEATURES EXCAVATORS, DOZERS,

Toll Free Fax

Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota • South Dakota

952/353-1770 866/413-4265 952/353-2750 e-mail pkiel@cegltd.com

SKID STEERS IRAY Auction held its fall sale on Sept. 11, in Foley, Minn.

equIpMenT 37 BOSS HTX Snowplow 38 DOOSAN Snow Pushers 82 ATLAS COPCO Dynapac F800T Tracked Paver

DeparTMenTs 91 CLASSIFIEDS 92 COMING AUCTIONS 100 BUSINESS CALENDAR

Mobile

Facebook

Twitter

YouTube

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2015, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 5

Quality Used Equipment...with support to back it up

Case CX160, ‘05, 6,579 hrs ......................$45,599

Leeboy 8500T, ‘06, 3,822 hrs ....................$24,699

DOZERS

MATERIAL HANDLERS

WATER EQUIPMENT

SKID STEER

Komatsu D51EX-22, ’08, 2,410 hrs........$112,500 Komatsu D51PX-22, ’07, 5,510 hrs ......$114,500 Komatsu D51PX-22, ’08, 4,247 hrs ......$114,500 Komatsu D61EX-12, ’02, 4,940 hrs..........$53,399 Komatsu D61PX-15EO, ‘07, 4,771 hrs ....$95,000 Komatsu D61PX-23, ’13, 1,529 hrs ......$216,599 Komatsu D65EX-15, ’06, 2,301 hrs........$144,500 Komatsu D65EX-15EO, ’07, 3,934 hrs ..$149,500 Komatsu D65PX-15EO, ‘07, 4,704 hrs ..$149,500 Komatsu D65WX-15EO, ’07, 3,959 hrs..$157,000 Komatsu D155AX-6, ’11, 3,694 hrs ......$265,000 Komatsu D275AX-5, ’03, 23,015 hrs ......$99,500

Cat 365CL-MH, ‘08, 10,428 hrs ............$137,500 Gehl RS8-42, ’03, 3,594 hrs ....................$37,500 Komatsu P400LC-8MH, ’08, 6,095 hrs ..$219,500

Komatsu HM300-2, ’07, 6,500 gal ........$299,499 Komatsu HM300-2, ’07, 6,500 gal ........$299,499

Case 450CT, ’07, 2,942 hrs ......................$23,499

FORESTRY Deere 759J, ’14, 1,186 hrs ....................$435,000 Komatsu 911.4, ’11, 4,323 hrs ..............$370,000 Komatsu 911.4, ’10, 5,148 hrs ..............$370,000 Komatsu 911.4, ’10, 7,620 hrs ..............$295,000 Norco Puma 220, ’11, 78 hrs ....................$CALL Ponsse Ergo Harvester, ‘05, 13,239 hrs ................ ................................................................$160,499 Timbco 415EX Track Harvester, ’07, 11,870 hrs.... ................................................................$169,299 Valmet 415EX/Rolly II, ’05, 10,092 hrs $124,500

OFF HIGHWAY TRUCKS Komatsu HD465-7, ’06, 18,843..............$219,500

MILLING Wirtgen W60, ’08, 628 hrs ....................$144,900 Wirtgen W600, ’03, 2,403 hrs..................$59,500 Wirtgen W2100, ’04, 8,538 hrs..............$209,500

COMPACTION Bomag BC61RB, ’00, 15,862 hrs ............$49,900 Bomag BC1172RB, ’05, 15,531 hrs ........$89,900 Bomag BW205AD, ’02, 3,520 hrs ............$21,500 Hamm HD90 Ozzy, ’04, 4,300 hrs ............$36,500 Hamm HD120HV, ‘03, 2,690 hrs ..............$32,999 Stone WP4100 Double Drum, ‘09, 1,018 hrs ........ ..................................................................$14,599 Volvo DD24 Roller, ’11, 1,032 hrs………$28,499

WHEEL LOADERS Cat 950H, ’06, 15,188 hrs ........................$69,500 Cat 980G, ‘02, 22,074 hrs ........................$64,499 Komatsu WA200PZ-6, ’14, 385 hrs........$115,000 Komatsu WA250-5L, ‘07, 3,911 hrs ........$84,999 Komatsu WA250-6, ’11, 5,646 hrs ..........$94,500 Komatsu WA270-7, ’15, 97 hrs..............$152,399 Komatsu WA270-7, ’15, 137.5 hrs ........$152,399 Komatsu WA320-7, ’13, 462 hrs............$174,500 Komatsu WA320-7, ’14, 81 hrs..............$165,000 Komatsu WA380-6, ’11, 2,094 hrs ........$179,500 Komatsu WA380-7, ’13, 1,385 hrs ........$185,000 Komatsu WA450-6, ’07, 8,069 hrs ..........$99.599 Komatsu WA500-6, ‘09, 9,628 hrs ........$207,299 Terex TL300-2, ’08, 2,441 hrs..................$69,500 Volvo L70D, ‘00, 9,613 hrs ......................$33,499

SCRAPERS

CRUSHING/SCREENING

Deere 9560R, ’12, 2,000 hrs..................$333,000

Kleemann MSD190D Screen, ’13, 688 hrs ............ ................................................................$255,000 Kleemann MC110Z Crusher, ’13, 714 hrs.............. ................................................................$475,000

PAVING Leeboy 8500T, ’06, 5,859 hrs ..................$25,799 Leeboy 8500T, ‘06, 3,822 hrs ..................$24,699 Leeboy 1000D, 1,475 hrs ........................$20,499 Mauldin 1750C, ’98, 3,618 hrs ................$19,799

Hamm HD120HV, ‘03, 2,690 hrs ..........$32,999

V I S I T

MOTOR GRADER John Deere 770A, ’84, 2,230 hrs ............$15,000

Komatsu WA500-6, ‘09, 9,628 hrs ..............................$207,299

EXCAVATORS Atlas Copco MB1200 Hydraulic Hammer, ’05, Rebuilt & Painted......................................$21,799 Case CX135SR, ‘11, 2,350 hrs ..............$104,500 Case CX160, ‘05, 6,579 hrs ....................$45,599 Cat314C CR, ’02, 5,627 hrs......................$54,499 Cat 322BL, ‘97, 5,620 hrs ........................$45,799 Cat 330CL, ’02, 12,032 hrs ......................$59,500 Cat M318, ‘96, 6,440 hrs ........................$39,500 Deere 225C LC, ’04, 7,029 hrs ................$62,667 Deere 350DLC, ’07, 5,837 hrs ..............$109,500 Deere 350DLC, ’07, 6,832 hrs ..............$109,500 Kobelco SK135SRLC, ’01, 4,114 hrs ......$27,500 Kobelco SK220LC, ’96, 9,972 hrs ............$28,399 Kobelco SK330LC, ’03, 11,889 hrs ..........$37,333 Kobelco SK485-9, ‘12, 3844 hrs ............$184,599 Komatsu PC138USLC-8, ’10, 5,484 hrs ..$79,999 Komatsu PC138USLC-8, ’11, 1,142 hrs $124,500 Komatsu PC138USLC-8, ’11, 3,218 hrs $104,500 Komatsu PC138USLC-8, ’14, 9.2 hrs ....$135,000 Komatsu PC160LC-7, ’05, 8,230 hrs........$54,500 Komatsu PC160LC-7, ’05, 5,926 hrs........$78,599 Komatsu PC200LC-7, ’02, 7,395 hrs........$79,500 Komatsu PC200LC-7, ‘03, 8,114 hrs........$79,500 Komatsu PC200LC-7, ’03, 7,248 hrs........$59,500 Komatsu PC200LC-7, ’04, 7,640 Hrs ......$89,500 Komatsu PC210LC-10, ’14, 978 hrs ......$197,280 Komatsu PC220LC-8, ’06, 9,084 hrs........$96,500 Komatsu PC220LC-8, ’07, 5,757 hrs......$119,500 Komatsu PC220LC-8, ’09, 4,707 hrs......$129,000 Komatsu PC228USLC-1, ’99, 4,400 hrs ..$54,500 Komatsu PC300LC-7EO, ’06, 7,736 hrs $110,000 Komatsu PC300LC-7EO, ’07, 4,714 hrs $157,500 Komatsu PC300LC-8, ’09, 4,686 hrs......$121,299 Komatsu PC360LC-10, ’12, 1,148 hrs....$264,500 Komatsu PC400LC-7, ’06, 10,541 hrs......$76,500 Komatsu PC400LC-7EO, ’07, 10,905 hrs $92,500 Komatsu PC400LC-7EO, ‘07, 10,448 hrs $99,500 Komatsu PC490LC-10, ‘12, 3,136 hrs....$265,000 Komatsu PC490LC-10LR, ‘10, 4,720 hrs$289,500 Komatsu PC600LC-7, ’05, 10,328 hrs....$199,500 Komatsu PC600LC-7, ’05, 5,482 hrs......$253,500 Komatsu PC600LC-8, ’06, 10,478 hrs....$199,500 Komatsu PC650LC-3, ’89, 20,397 hrs......$42,500 Komatsu PC750LC-7, ’04, 6,613 hrs......$349,500 Volvo EC220DL, ’13, 2,151 hrs ..............$134,500

Financing Available for Qualified Buyers

15 Roland Branch Locations in IL, IN, MI, MO, and WI

Call AJ Perisho (217) 789-7711 • Email: aperisho@rolandmachinery.com

R O L A N D M A C H I N E R Y . C O M

Page 6 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke • (630) 739-7770

Excavator Rental Specials Bolingbrook, IL

Serving the Constructor ®

View our complete Used & “Like New” inventory at McCannOnline.com

Clean, reliable equipment

Competitive rates

Rent by the day, week, or month

Illinois

Delivered to your job site

Addison 630-627-0000 Bolingbrook* 630-739-7770

2012 Case 850L, s/n NCD80092, 1191 Hrs, Cab w/Heat & AC, 124” Blade, 24” Grousers .. ............................................................$94,500

2012 Case CX160C, s/n DAC160K6NCSAF1112, 1950 Hrs, 9’11” Arm, 24” Shoes, Single Acting Hyds, Coupler, No Bkt ....................................................$124,900

2013 Case CX80, s/n DAC080K3NCSLB7386, 1500 Hrs, 11’7” Arm, 18” Rubber Tracks, Double Acting Hyds, No Bkts..............$74,900

2007 Case 450, s/n N7M446035, 2650 Hrs, ROPS, Manual Coupler, Two Speed, Ride Control, 73” Bkt, 12x16.5 Tires ..........$19,900

Chicago 312-942-9200 Crestwood 708-597-3110

CX130 Excavator

CX160 Excavator

CX210 Excavator

CX225 Excavator

MC r h EJH EFQUI $410/Day, $1,230/Week, $3,690/Month

MC r h EJH EFQUI $475/Day, $1,425/Week, $4,275/Month

MC r h EJH EFQUI $580/Day, $1,740/Week, $5,220/Month

MC r h EJH EFQUI $755/ Day, $2,265/Week, $6,795/Month

McHenry* 815-385-0420

Rent Today!

Wauconda 847-526-9444 2001 Case 75XT, s/n JAF0318712, 1600 Hrs, ROPS, Hyd Coupler, 73” Bkt w/Teeth Bar, 12x16.5 Tires ......................................$16,000

2011 Case SR250, s/n JAFSR250LCM44755, 1150 Hours, Cab w/Heat & AC, Bic High-Flow, 12 X 16.5 Tires, 78” Bucket ................$39,500

2006 Takeuchi TL150, s/n 21503859, 2950 Hours, Cab w/AC, Case Controls, 80” Smooth Bucket ................................................$29,500

CX240 Excavator

CX330 Excavator

MC r h EJH EFQUI $700/Day, $2,100/Week, $6,300/Month

MC r h EJH EFQUI MC r h EJH EFQUI equipment. Call us today to supply your next $875/Day, $2,625/Week, $7,875/Month $1,235/Day, $3,705/Week, $11,115/Month

2013 Case SV250, s/n JAFSV250KDM469195, 530 Hours, Cab w/AC, EH Controls, Hyd Coupler,12 x 16.5 Tires, 78” Bucket....$38,500

Indiana Schererville* 219-865-6545

McCann CX460 Rents aExcavator full line of heavy and light construction rental. McCannOnline.com

*Case authorized dealer location

1985! e c n i S

NEW, USED & REMAN PARTS

• • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

^d Z Z Yh/WD Ed ŽŶƐƚƌƵĐƟŽŶ ƋƵŝƉŵĞŶƚ Θ ^ƵƉƉůŝĞƐ ^ĂůĞƐ ^ĞƌǀŝĐĞ ZĞŶƚĂůƐ ǁǁǁ͘ƐƚĂƌĞƋƵŝƉ͘ĐŽŵ ϴϳϳ-Ϯϲϳ-ϳϮϬϯ ĞƐ DŽŝŶĞƐ ŵĞƐ ĞĚĂƌ ZĂƉŝĚƐ tĂƚĞƌůŽŽ

www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 7

PAVERS / ROAD WIDENERS BOMAG CR362L - ‘14, 518 Hrs, Track Paver, Stretch 16 Electric Screed, Topcon V System and More, #C000555 ..................................................................................................................P.O.R. BOMAG CR662RM - ‘15, 114 Hrs, Material Transfer w/Hopper, #C000763..........................P.O.R. GOMACO PLACER - ‘15, 11 Hrs, Self Propelled Rubber Tired Placer to - 24 ft w/30” Belt ............ ........................................................................................................................................$112,000 LEEBOY 700SR - ‘97, 8’ - 12’ Diesel Power, Rubber Tired Paver, #C000847 ......................$9,500 MIDLAND SPD6 - ‘15, 62 Hrs, Right and Left Discharge 1-6 ft, Hyd Strike Off, Hyd Pushrollers, Washdown System, #C000820 ............................................................................................P.O.R. P.O.R. items may be on rent causing pricing and hours to vary.

MILLING MACHINES BOMAG BM600/15 - ’14, 169 Hrs, 24” Grinder with rear discharge conveyor, #C000525 ............ ......................................................................................................................................................$185,000 BOMAG BM1200/30 - ‘14, 693 Hrs, 4’ Mid Mount Grinder with Front discharge conveyor, #C000452 ..........................................................................................................................................P.O.R. KAFKA TRI PACK CONVEYOR - ‘14, 36” x 70’ ......................................................................P.O.R. NEW SANDVIK CJ412 PORTABLE JAW PLANT - ‘14, 47” x 33” + Much More ......................P.O.R. WIRTGEN W50DC - ‘13, 400 Hrs, 20” Cut, Deep Cut Machine, 3 Wheel, Rear Discharge Mill $180,000

LIEBHERR R954BHD W/ LABOUNTY MSD4500R SHEAR

GROVE RT760

YOUR AUTHORIZED DEALER

in WISCONSIN and UPPER MICHIGAN for: GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS • LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLER CRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/ JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAG CRUSHERS • MANITOWOC CRANES

Large Selection of New & Used Equipment in Stock.

ROLLERS HYPAC C784 - ‘08, 84” Double Drum Vib, #C000673 ........................................................$22,500 INGRAM 315 - 4 to Choose from, 3 Wheel Static Roller, s/n & Hrs Available ..............$26,500 Ea. SAKAI SW990 - ’14, 721 Hrs, 84” Double Drum Vibratory Roller, #RR10133 ................$114,986 SAKAI SW770HF - ’14, 403 Hrs, 67” Drum Remaining Full & EPTW Warranty....................P.O.R. SAKAI SW770HF - ’14, 687 Hrs, 67” Double Drum Vibratory Roller, #C000532..................P.O.R. SAKAI SW770HF - ’12, 700 Hrs, 67” Double Drum Vibratory Roller, #C000577..................P.O.R. SAKAI SW502 - ‘13, 505 Hrs, 51’ Drum 9000 lb remaining std and or eptw warranty, #C000212 ..........................................................................................................................................$35,148 SAKAI SW300 - ‘12, 19 Hrs, 40” Double Drum Vibratory Roller, Full Warranties, #C000746 $29,750 SAKAI SW300 - ‘13, 136 Hrs, 40” Double Drum Vibratory Roller, #C000211, S/N 40156 ............ ....................................................................................................................................$33,819.31 SAKAI GW750-2 - ’14, 110 Hrs, Vibratory Pnuematic Tire Roller, #C000533 ................ $124,808 *Comes with any remaining standard and 3 year extended power train warranty.

EXCAVATORS GRADALL XL3200 III - ‘14, 955 Hrs, Crawler Mounted Telescoping Boom Excavator....$169,950 GRADALL XL4100 - ‘94, 8368 Hrs, Working as is, #C000386, S/N 414218......................$19,500 GRADALL XL4100 - ‘98, 8884 Hrs, Workable, as is, #62013A, S/N 413282 ....................$25,000

AGGREGATE EQUIPMENT KPI 1500 EV(A) VERTICAL SHAFT IMPACT CRUSHER, Hydra Arm Lid Removal, Electric Motor Mount (Less Motor), 2012 ......................................................................................................................................................................$49,500 JCI K-400 PORTABLE CONE CRUSHER, 400 HP Electric Feed Conveyor, Side Discharge Conveyor, Hyd. Leveling Jacks, Tri-Axle Running Gear, 2006....................................................................................................................$345,000 JCI 6X20TD PORTABLE SCREEN PLANT, Underscreen Discharge Conveyor, Two (2) Cross Conveyors, Electric Control Panel, 2012 ............................................................................................................................................$175,790 CEDARAPIDS 4136 PORTABLE TWIN ROLL PLANT, Allis 5’x16’ SD Screen, Cummins V-12 Power, Tandem Axle Chassis, Hydraulic Leveling ..................................................................................................................................$61,000 METSO/NORDBERG MODEL HP300 CLOSED CIRCUIT PORTABLE CONE PLANT, with a 6'x20' Triple Deck Screen. 2003 Model Year ................................................................................................................................................$360,000

CRANES GROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom, 32’ to 56’ Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work ....................................$155,900 GROVE RT855B 55 TON ROUGH TERRAIN CRANE, 1995, with Cummins diesel, 37’ to 115’ boom, 35’ to 60’ swingaway, LMI, Grove model HO30 main & aux. hoists, 29.5x25 tires ..............................................$149,500 AMERICAN 5300, 1988, 70 Ton Crawler Crane, Cummins w/3 Stage Converter, CLL on One Drum, Third Drum, Independent Travel, 130’ Boom, 30’ Jib ................................................................................................$149,500

SCRAP HANDLING EQUIPMENT LIEBHERR R954BHD WITH A LABOUNTY MSD4500R SHEAR, Carrier and shear have been refurbished ..CALL

Contact Tim or Marty in Illinois

1-800-307-0221 treuss@finkbinerequipment.com mahrendt@finkbinerequipment.com Photos & Detail Descriptions visit: www.finkbinerequipment.com

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Lanny Peterson at:

lpeterson@amstate.com or mobile 1-715-574-8089 or 1-800-242-7113 Visit us at: www.amstate.com

Page 8 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

FOLLOW THE LEADER TOP 3 REASONS TO CHOOSE VOLVO - POWERFUL. DURABLE. RELIABLE.

Renting or buying NUSS has you covered Uptime is not optional – we make sure you never have to choose between performance or productivity. We work hard to ensure you spend more time on the job site and less time in the shop. Whether you are buying or renting, Volvo guarantees the same quality, power & durability for all machines. Choose the equipment you need from a name you trust – Nuss Truck & Equipment

Smart Works.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees WHEEL LOADERS

Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25 rubber, 15K hours, work ready . . . . . . . . . . . .$42,500 Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . . . .$79,500 John Deere 624G, 1996, EROPS, quick coupler, GP bkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$46,000 Volvo L60E, 2005, EROPS, coupler, aux hyd, boom susp, 20.5R25, v. good . . . . . . . . . . . . . . . . . .$89,500 COMPACTORS

IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean $69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000 (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500 LANDSCAPING

Case/IH 485 Utility Tractor, 1986, Case 3 cyl dsl engine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd angle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500 CRAWLER LOADERS

Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt .$37,500 Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000

OFF ROAD HAULERS Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready . . . . . . . . . . . . . . . .$127,500 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites . . . . .$87,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 CRAWLER TRACTORS

Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6" TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000 (5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALL Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB coupler, plumbed, 8’6” width, nice, work ready . .CALL Volvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing very good condition . . . . . . . . . . . . . . . . . . .$159,000 TRUCKS & TRAILERS

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL AIR COMPRESSORS

IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL SPECIALS

(12) Allmand Light Plants, 2008-2010, diesel, s/a towtype, (4) MH lights, excellent . . . . . . . . .From $5,200

(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, BACKHOES winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea. Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000 Case 580L Rubber Tire Loader Backhoe, 1997, (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea. DRILLS John Henry Drill Mtd on Cat 320N, 1994, 24' mast, CRANES Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, Duraquip dust collection . . . . . . . . . . . . . . . .$150,000 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 MISCELLANEOUS Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom (2) Balderson Broom Attachment for Cat IT Machines, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. MOTOR SCRAPERS

ATTACHMENTS Cat 613C Water Wagon, 1994, 5000 gal drop tank, BUCKETS ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 PC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good Over 100 Excavator, Loader, Specialized & Grapple condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Buckets in Stock Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice -Call For Your Needs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, HYDRAULIC EXCAVATORS excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick couOthers Available Call pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000 Prices Are Negotiable - At Your Inspection Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber, All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC. operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER

Page 10 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

VOLVO USED EQUIPMENT Contact your local dealer: Doug Wilson 704.562.2032 doug.wilson@ascvolvo.com Billy Brice 678.318.9500 billy.brice@ascvolvo.com

2014 VOLVO A25F, 2200 Hrs..........$275,000

2014 VOLVO A25F, 1742 Hrs ..........$294,250

A40 Finance leasing available for 24 months with payments as low as $7,900 per month. Call Doug Wilson for details.

Asphalt / Pavers / Concrete Equipment 2007 INGERSOLL RAND PF5510, 3000 Hrs....................................................................................$33,000 (2) 2011 VOLVO PF6110, 2900-3100, Hrs ..............................................................$165,000-$192,500

Compactors - Smooth Drum 2006 VOLVO DD118HF, 4300 Hrs........................................................................................................$27,500 2009 VOLVO SD100D, 1850 Hrs ..........................................................................................................$82,500 2013 VOLVO SD75, 1770 Hrs ................................................................................................................$77,000

ASC Construction Equipment USA, Inc. North Dakota Bismarck Fargo Minot Williston North Carolina Charlotte Raleigh Asheville Greenville South Carolina Columbia North Charleston Piedmont

2010 VOLVO G930, 7100 Hrs..........$104,500

Excavators - Crawler 2013 KOMATSU PC360 LC-10, 2200 Hrs ......................................................................................$209,000 2013 VOLVO EC140DL, 1690 Hrs ......................................................................................................$118,250 2003 VOLVO EC210B LC, 9600 Hrs ..................................................................................................$60,500 2013 VOLVO EC210B LC, 3000 Hrs ................................................................................................$110,000 2012 VOLVO EC210CL, 3800 Hrs ........................................................................................................$82,500 (3) 2013 VOLVO EC220DL, 1700-2250 Hrs ............................................................$134,750-$143,000 (4) 2014 VOLVO EC220DL, 1540-1650 Hrs ............................................................$140,250-$145,750 2011 VOLVO EC240CL, 3900 Hrs......................................................................................................$110,000 2012 VOLVO EC250D LR, 2650 Hrs ................................................................................................$165,000 2013 VOLVO EC250D LR, 1750 Hrs..................................................................................................$181,500 2011 VOLVO EC250DL, 4000 Hrs......................................................................................................$137,500 2012 VOLVO EC300DL, 1549 Hrs......................................................................................................$198,000 2011 VOLVO EC340DL, 5000 Hrs......................................................................................................$143,000 (9) 2012 VOLVO EC340DL, 1920-4600 Hrs ............................................................$154,000-$214,500 (9) 2013 VOLVO EC340DL, 1700-3400 Hrs............................................................$160,000-$220,000 (3) 2014 VOLVO EC340DL, 1600-4200 Hrs ............................................................$214,500-$222,750 2013 VOLVO EC380DL, 3900 Hrs ....................................................................................................$187,000 2014 VOLVO EC380EL, 1910 Hrs ......................................................................................................$253,000 2004 VOLVO EC460B LC, 12400 Hrs ................................................................................................$52,250 2011 VOLVO EC460C LC, 6700 Hrs ................................................................................................$214,500 (2) 2012 VOLVO EC480DL, 1800-3700 Hrs............................................................$247,500-$313,500 2013 VOLVO EC480DL, 3077 Hrs ....................................................................................................$264,000 2014 VOLVO EC480DL, 1796 Hrs......................................................................................................$319,000

Excavators - Wheel 2008 FUCHS MHL350D, 12175 Hrs..................................................................................................$110,000 (2) 2011 VOLVO EW180C, 3100-3400 Hrs ............................................................................$125,000 Ea. 2012 VOLVO EW180D, 1785 Hrs ......................................................................................................$170,000 (2) 2013 VOLVO EW180D, 1900-2100 Hrs..............................................................$160,000-$181,500

Georgia Buford Savannah

Loader Backhoe

East Tennessee Knoxville Chattanooga

2013 LB PERFORMANCE G700, 450 Hrs ......................................................................................$110,000 2008 VOLVO G930, 6750 Hrs................................................................................................................$95,000 2009 VOLVO G930, 7900 Hrs................................................................................................................$95,000 2010 VOLVO G930, 7100 Hrs..............................................................................................................$104,500 2011 VOLVO G946, 2350 Hrs ..............................................................................................................$154,000

2000 JCB 215E, 1290 Hrs ........................................................................................................................$18,700

Motor Graders

Full inventory at: www.ascvolvo.com

Off-Highway Trucks

2011 VOLVO A25F, 4950 Hrs ..............................................................................................................$214,500 (8) 2012 VOLVO A25F, 2600-3967 Hrs ....................................................................$214,500-$261,250 (8) 2013 VOLVO A25F, 1750-2942 Hrs......................................................................$194,250-$294,250 (8) 2014 VOLVO A25F, 1679-2486 Hrs ....................................................................$266,750-$297,000 2006 VOLVO A30D, 6530 Hrs ..............................................................................................................$231,000 (7) 2012 VOLVO A30F, 2750-3700 Hrs ....................................................................$258,500-$299,750 (3) 2013 VOLVO A30F, 2600-3700 Hrs ....................................................................$258,500-$302,500 (8) 2014 VOLVO A30F, 1550-2400 Hrs ....................................................................$310,750-$333,900 2012 VOLVO A35F, 3100 Hrs ..............................................................................................................$339,200 2010 VOLVO A40E, 4400 Hrs ..............................................................................................................$328,600 (12) 2011 VOLVO A40F, 4430-7400 Hrs ..................................................................$264,000-$360,400 (17) 2012 VOLVO A40F, 2600-6400 Hrs ..................................................................$286,000-$402,800 (16) 2013 VOLVO A40F, 1780-5550 Hrs ..................................................................$324,500-$445,200 (4) 2014 VOLVO A40F, 1675-1850 Hrs......................................................................$445,200-$450,500 (2) 2013 VOLVO A40F FS, 2400-4300 Hrs ..............................................................$402,800-$434,600 2014 VOLVO A40G, 4050 Hrs..............................................................................................................$402,800

Water Equipment - Trucks

2006 CATERPILLAR 773, 11350 Hrs ................................................................................................$218,900 2010 VOLVO A30, 3315 Hrs..................................................................................................................$275,000 2006 VOLVO A30D, 7600 Hrs..............................................................................................................$242,000

Wheel Loaders

2014 SDLG LG938L, 116 Hrs ..............................................................................................................$104,500 2011 VOLVO L110F, 6883 Hrs ............................................................................................................$121,000 (5) 2012 VOLVO L110G, 1850-5600 Hrs ..................................................................$170,500-$220,000 (10) 2013 VOLVO L110G, 2400-6800 Hrs ..............................................................$145,000-$206,250 2014 VOLVO L110G, 565 Hrs ..............................................................................................................$249,700 2003 VOLVO L120G, 2100 Hrs ..........................................................................................................$200,000 (2) 2012 VOLVO L120G, 2627-3845 Hrs..................................................................$187,000-$198,000 2013 VOLVO L120G, 2500 Hrs............................................................................................................$185,000 (3) 2014 VOLVO L120G, 1705-2055 Hrs..................................................................$200,000-$233,750 (2) 2010 VOLVO L150F, 9159-11750 Hrs ................................................................$110,000-$165,000 (2) 2012 VOLVO L150G, 3150-4980 Hrs..................................................................$209,000-$245,000 (4) 2014 VOLVO L150G, 1950-2750 Hrs..................................................................$290,000-$319,000 2011 VOLVO L180G, 6200 Hrs............................................................................................................$180,000 (2) 2012 VOLVO L180G, 4693-5500 Hrs..................................................................$200,000-$253,000 (2) 2013 VOLVO L180G, 3350-4600 Hrs..................................................................$253,000-$280,000 2014 VOLVO L180G, 2050 Hrs ..........................................................................................................$330,000 2013 VOLVO L220G, 1800 Hrs............................................................................................................$408,100 (2) 2012 VOLVO L250G, 3100-3455 Hrs ..................................................................$315,000-$371,000 2013 VOLVO L250G, 2200 Hrs ..........................................................................................................$418,700 2012 VOLVO L30B, 3706 Hrs ................................................................................................................$40,700 2011 VOLVO L50F, 15934 Hrs................................................................................................................$38,500 (3) 2013 VOLVO L50GS, 5800-6200 Hrs ..................................................................................$64,350 Ea. (2) 2012 VOLVO L60G, 1700-2550 Hrs ....................................................................$126,500-$132,000 2013 VOLVO L60G, 2600 Hrs ..............................................................................................................$126,500 2013 VOLVO L70G, 3100 Hrs ..............................................................................................................$143,000 2014 VOLVO L70G, 1573 Hrs ..............................................................................................................$156,750 2013 VOLVO L90, 2400 Hrs ..................................................................................................................$150,000 2004 VOLVO L90E, 10526 Hrs ..............................................................................................................$49,500 (6) 2012 VOLVO L90G, 1189-5300 Hrs ....................................................................$135,000-$192,500 (14) 2013 VOLVO L90G, 650-5500 Hrs ....................................................................$137,500-$199,100 (2) 2014 VOLVO L90G, 1860-1875 Hrs ..................................................................................$170,500 Ea.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 11

NORTH DAKOTA Bismarck 701.250.4882 Fargo 701.271.2360 Minot 701.839.4020 Williston 701.570.5309

GEORGIA Buford 678.318.9500 Savannah 912.964.8079

SOUTH CAROLINA North Charleston 843.414.1120 Columbia 803.791.0740 Piedmont 864.704.1060

NORTH CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710

TENNESSEE Chattanooga 423.308.7940 Knoxville 865.525.1845

Power, comfort & safety. Get it all with Volvo. From earth moving to mining, Volvo Articulated Haulers provide you with the versatility and reliability to tackle any task. This, coupled with their incredible fuel efficiency, makes Volvo Articulated Haulers the right choice to get the job done.

ascvolvo.com

Smart Works.

Page 12 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Roland Machinery Company Hosts Appreciation Dinner

n Sept. 11 Roland Machinery Company held a customer appreciation dinner at its Escanaba, Mich., branch after the 70th annual logging and heavy equipment expo closed for the day. Several hundred customers were treated to a barbecue dinner and door prizes were given out. Guests also had the opportunity to operate Komatsu logging equipment as well as Komatsu construction machinery. For more than 50 years, heavy equipment customers have trusted Roland Machinery Company to provide them with the machines, support and service in order to achieve their goals. The company has locations throughout the Midwest, including Illinois, Missouri, Indiana, Wisconsin and Michigan. For more information, visit www.rolandmachinery.com. (This story also can be found on Construction Equipment Guide’s In remembrance of 9/11, Roland Machinery Co. proudly displayed Web site at www.constructionequip- the American flag in the shop area. (L-R, back) are Marvin and Bruce Anderson and (L-R, front) are Rafe and Eddy Anderson. mentguide.com.) CEG

(L-R): Enjoying the barbecue dinner at Roland Machinery Co.’s Escanaba, Mich., branch are Josh Cain, Michael Thomas and Mark and Chris Cain, all of Cain Brothers Logging Inc.

(L-R): Matt Roland, president, Roland Machinery Co.; Peggy Rudden, a retired employee with 41 years of service; and Bill Sebero of William R. Sebero and Son share some stories of Peggy’s 41 years at Roland Machinery Co.

Ed Harris (L), Roland Machinery Co., welcomes customer Brian Erickson of Erickson Logging to the customer appreciation dinner. Larry Heathman (L) and Jeff Anderson, both of Louisiana Pacific Corp., look over some of the logging equipment in the shop area.

Robert (L) and Joe Taylor of Cutting Edge Forestry Products enjoy the customer appreciation dinner after a day at the 70th annual Great Lakes Logging and Heavy Equipment Expo.

Caleb Patz (L) of Suchovsky Logging Inc. and Roland Machinery Co representative Brad Jackson attend the event.

Wendell Risser, Bridge Creek Logging LLC, and Winfred Byers of Byers Forestry head out to the outside demo area to run some of the Komatsu logging equipment.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 13

Calll us tod day! Doug Mehner / Bryan Ganger

(866) 485-71 7180 ww ww.RBused.com

Celeb bratiing g our 30th Year!

2014 KOMATSU PC138US LC-10: #82413, 2006 KOMATSU PC160 LC-7: #82134, CAB/AC, MECH THUMB, 5900 HRS .............. CAB/AC, JRB QC, BLADE, AUX HYD, KOM........................................................$69,500 TRAX, 650 HRS..............................$169,500

2011 KOMATSU PC138US LC-8: #82184, 2005 KOMATSU PC200 LC-7: # 92247, CAB/AC, HYD THUMB, BLADE, ROADLINCAB/AC, 31.5" TRACKS, 9' 7" ARM, JRB QC, ERS, REAR CAMERA, 3,100 HRS ..$139,500 AUX HYD, 7,750 HRS ......................$74,500

2008 KOMATSU PC220LC-8: #82213, CAB/AC, 31.5” TRACKS, QC, HYD THUMB, KOMTRAX, 6400 HRS....................$124,500

2007 KOMATSU PC220LC-8: #81976, CAB/AC, 31.5” TRACKS, LONG FRONT, DITCHING BKT, 5800 HRS ............$169,500

2014 KOMATSU PC210 LC-10: #82186, 2006 KOMATSU PC228US LC-3: #82164, CAB/AC, 31.5" TRACKS, 9' 7" ARM, AUTO CAB/AC, JRB QC, HYD THUMB, 5100 HRS .. GREASER, 800 HRS ......................$169,500 ......................................................$139,500

2008 KOMATSU D65EX-15EO: #81377, CAB/AC, 24” TRACKS, SEMI-U BLADE, DRAWBAR, 3300 HRS ..................$159,500

2007 KOMATSU D65EX-15EO: #81289, CAB/AC, SEMI-U BLADE, DRAWBAR, KOMTRAX, 3250 HRS....................$159,500

2008 KOMATSU D65PX-15EO: #81695, 2007 KOMATSU D65WX-15EO: #81638, CAB/AC, 36” TRACKS, SWEEPS, REAR CAB/AC, 32” TRACKS, SIGMA BLADE, SCREEN, 6550 HRS ......................$117,500 SWEEPS, KOMTRAX, 2900 HRS....$169,500

2007 KOMATSU WA200-6: #82234, CAB/AC, 2006 KOMATSU WA250-5: #82005, CAB/AC, 2008 KOMATSU WA380-6: #91487, CAB/AC, 2006 KOMATSU WA600-3: #81553, JRB QC/BUCKET, 4,300 HRS ........$169,500 CAB/AC, 8YD SPADE NOSE W/ TEETH, QC/BKT, RIDE CONTROL, LSD AXLES, KOM- QC/BUCKET, 3RD VALVE, HD BOOM, 4500 4,650 HRS......................................$399,500 TRAX, 4200 HRS..............................$99,750 HRS................................................$114,500

Page 14 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

John Deere, Nortrax Introduce New L&M Series at Expo

ohn Deere and Nortrax introduced the new L&M Series forestry equipment at the 70th annual Great Lakes Logging & Heavy Equipment Expo, Sept.10 to 12 in Escanaba, Mich. More than 12 machines were on display at the Nortrax outdoor booth and included Morbark whole tree chippers as well as John Deere construction equipment used in forestry applications. Nortrax was the official social media sponsor of the show and took souvenir photos of customers next to the new L&M equipment and promoted on its Facebook page. A forestry simulator was available for customer to try their skills at harvesting and skidding wood and the Nortrax tent featured exclusive John Deere gear, apparel and toys for sale. Nortrax was able to raise $2,305 for Log A Load for kids through the generous donations by the Lake States loggers during the show for a chance to win a John Deere riding lawn mower. Nortrax customer, Ted Houle of Crandon, Wis., was drawn as the lucky winner of the riding lawn mower. Friday night, following the close of the logging show, Nortrax hosted a customer appreciation event at its Escanaba branch. Nortrax territory managers, general managers, service technicians and other staff, and their spouses, cooked and served burgers and brats for more than 450 customers and invited guests. Randy Beauchamp of Wilson, MI won the toy John Deere gator door prize giveaway at the customer appreciation event. Nortrax President, Tim Murphy was in attendance for the logging show and customer appreciation night “The customer event at our Escanaba store has really turned into something that is very special. What is unique is that our Escanaba and Nortrax employees and spouses put on the entire event. Nothing catered.... all home grown. Without question it was enjoyed by all, ” said Murphy. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

The Nortrax crew poses in front of the John Deere 1270E harvester for its annual Logging Show photo.

John and Janet Kettunen pose for a photo and said their kids would be excited to see them on the Nortrax Facebook page. Bridget Burmeister and her young crew of Burmeister Logging of Sheldon, Wis., pose for a souvenir photo.

(L-R): Clyde, Roger and Lester Fraley of Fraley Bros. & Sons Logging, Marquette, Mich., join in the social media fun.

Roger Trudgeon and Courtney Harma give the new L Series skidder a thumbs-up.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 15

JD 844K, Cab, Air, 7.25 Challenger MT955B, Cab, Air, Duals, Radials, yd GP Bkt, #93575 ........ #75562 ..........$129,000 ......................$215,000

Case STX550 Scraper JD 225DLC, 9’ 7” Arm, JD 245GLC, 9’7” Arm, Tractor, #75384 ............ 32” Pads, Aux Hyd, 32” Pads, Hyd Thumb, #95039 ..........$199,000 ......................$229,000 #91555 ..........$179,000

JD 250GLC, 11’ 10” Bomag BW213PDH-3, Arm, 32” Pads, Cab, Air, 84” Padfoot, Warranty, #94036 .......... #92390 ............$85,000 ......................$189,000

Low Hour JD 844K’s Available

JD 350GLC Material JD 700K LGP, 30” Pads, Handler, #52129 .......... 132” PAT Blade, #94673 ......................$465,000 ......................$168,000

JD 850K, 24” Pads, JD 9560RT Scraper 128” Semi U Blade, Tractor, 30” Tracks, #52276 ..........$287,000 Ripper, Full Warranty, #75578 ..........$227,000

NPK Hammers, All Sizes for All Makes. Inspected and Well Maintained, GH4-GH18

JD 350DLC, 13’1” Arm, Volvo L220F, Cab, Air, 32” Pads, #75023.......... GP Loader, #75214 ...... ......................$139,000 ......................$134,000

JD 9560R Scraper JD 650J, LT, 105” PAT Blade, 20” Pads, Winch, Tractor, #52318 ............ #92167..............$115,000 ......................$245,000

JD 744K, Cab, Air, 5,25 JD 400D, 8000 Gallon JD 800CLC, 11’10” Klein Water Tank, Arm, 36” Pads, CWRD, yd Bkt, Warranty, #94252 ..........$188,000 #75521 ..........$294,000 #74752 ..........$229,000

Page 16 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Get a Load of Kubota Quality 2013 Kubota KX080-4

Stk# 52323-(S) C/H/A, Blade, Bucket, Factory Warranty Remaining, Rental Fleet, 744 Hrs.... ..........................................................$79,900

2014 Kubota KX040-4

Stk# 65329-(S) ROPS, 6 Way Blade, Quick Tach, Hyd Thumb, 24” Bkt, Factory Warranty, Demo, 105 Hrs ................0% for 60 Months, $883 per month + Tax & UCC Fee OR $48,500

2013 Kubota SVL75-2

Stk#34326-(L) C/H/A, Hyd Quick Attach, 2 Spd, 15” Trks, IT4 Engine, Factory Warranty Remaining, Rental Fleet, 621 Hrs ......$43,900

Anoka (A), MN 888-448-5266 • 763-323-1720

2014 Kubota KX057-4

Stk# 89566-(S) C/H/A, Blade, SP2 Hyd, Hyd. Thumb, Bucket, Factory Warranty Remaining, Rental Fleet, 570 Hrs ........................$58,900

2015 Kubota U17

Stk# 94439-(A) ROPS, Blade, Rubber Tracks, Bucket, Factory Warranty Remaining, Rental Fleet, 65 Hrs ......................................$29,900

2013 Kubota SVL90-2

Stk# 52375-(L) C/H/A, Hyd Quick Attach, 2 Spd, 18” Trks, IT4 Engine, Factory Warranty Remaining, Rental Fleet, 679 Hrs ......$50,900

Loretto (L), MN 888-479-4342 • 763-479-8200

2013 Kubota KX057-4

Stk# 52322-(A) C/H/A, Blade, Hyd Thumb, Bucket, Factory Warranty Remaining, Rental Fleet, 253 Hrs ....................................$62,900

2015 Kubota K008T4

Stk# 94590-(S) ROPS, Blade, Bucket, Factory Warranty Remaining, Rental Fleet, 88 Hrs...... ..........................................................$16,900

2013 Kubota L5460HST

Stk# 52361-(S) ROPS, Hydrostatic, 54HP, 4WD, Full Factory Warranty, Demo ................ 0% for 60 Months, $466 per month + Tax & UCC Fee OR $27,900

Shakopee (S), MN 877-753-6100 • 952-445-6310

www.lanoeq.com www.lanoequip.com www.lanogardengear.com

2012 Kubota U55

Stk# 15268-(S) C/H/A, Blade, Hydraulic Thumb, Rubber Tracks, Bucket, Rental Fleet, 1509 Hrs............................................$45,900

2013 Kubota SVL75-2

Stk# 32028-(A) C/H/A, Hyd Quick Attach, 2 Spd, 15” Trks, IT4 Engine, Factory Warranty Remaining, Rental Fleet, 424 Hrs ......$45,500

2013 Kubota RTV-X1120D

Stk# 65426-(L) 24.8HP, Camo, Alloy Wheels, ATV Tires, Spray In Bedliner, Factory Warranty Remaining, Rental Fleet, 135 Hrs ......$12,900

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 17

.com

2010 CATERPILLAR TL943, ID# NGU0218, S/N TBL01586, 2505 HOURS ..............................................$65,200

2009 CATERPILLAR 120M, ID# NUC0409, S/N D9W00125, 3695 HOURS ........................................$160,500

2013 CATERPILLAR 906H2, ID# NUC0414, SN# JRF00780, 3200 HOURS................................................$54,900

2011 CATERPILLAR 259B3, ID# HUC0126, S/N# YYZ00482, 1857 HOURS, CAB, AIR ........................$33,900

2007 CATERPILLAR 236B, ID# HUC0155, S/N# HEN05965, 2743 HOURS, OROPS ..........................$18,900

2010 CATERPILLAR TH255, ID# HGU0040, S/N# TBS00490, 1195 HOURS ..............................................$41,800

2010 CATERPILLAR 140M, ID# NUC0419, S/N B9D02064, 5970 HOURS ..........................................$166,400

2010 CATERPILLAR 336DL, ID# NUC0395, S/N W3K01210, 6460 HOURS, EROPS..........................$154,400

2008 CATERPILLAR D6T, ID# HUC0012, S/N# LAY01122, 8950 HOURS ..........................................$167,200

2009 CATERPILLAR 12M, ID# MUC0321, S/N B9F00371, 5065 HOURS, CAB, AIR ............................................$144,700

2014 CATERPILLAR 420F, ID# HUC0152, S/N# SKR03488, 730 HOURS..............................................$101,000

2014 CATERPILLAR 262D, ID# HUC0104, S/N DTB00936, 95 HOURS..................................................$48,900

2014 CATERPILLAR D7E, ID# HBU0058, S/N TAN01378, 910 HOURS ............................................CALL FOR PRICING

2011 CATERPILLAR 305DCR, ID# HUC0033, S/N XER00305, 1415 HOURS ............................................$39,700

2014 CATERPILLAR 289D, ID# HUC0169, S/N# TAW01221, 755 HOURS ............................................$64,400

2011 CATERPILLAR 924H, ID# NUC0450, S/N# HXC025565395 HOURS ..............................................$99,900

Kansas City (844) 845-8814 • Wichita (866) 773-5581 • FoleyEQLeads@FoleyEQ.com • (316) 943-4211 International

Page 18 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Great Lakes Logging & Heavy Equipment Expo Turns 70

(L-R): Tracy and Rod Wheeler of Wheeler’s Wolf Lake Sawmill stop by the Nortrax display area to see Matt Hanson, general manager of the Escanaba branch of Nortrax, and Tim Murphy, president of Nortrax.

he Great Lakes Timber Professionals held its 70th annual Great Lakes Logging & Heavy Equipment Expo Sept. 10 to 12 at the U.P. State Fairgrounds in Escanaba, Mich. Industry professionals converged on the site for multiple events and demonstrations including the kickoff event — Miracle of Life Building on Fairgrounds. Days two and three featured contests and demonstrations from event sponsors, including Roland Machinery Company, Fabick CAT and Nortrax. Roland Machinery sponsored the Forwarder Operator Competition. The Roland Machinery display, 1st-In-The-Forrest, garnered attention from attendees due to the Komatsu XT-3 Series including the 931 harvester with the C144 harvesting head. This Tier IV Final harvester boasts an H-series parallel crane and 68 percent higher hydraulic working flow for increased productivity.

see EXPO page 54

The theme at the AIS forestry division display area is “yes we can.”

The Bandit Beast 3680 horizontal grinder got a lot of attention at the annual expo. (L-R) are Bobbi Deede and Tim Jacobs of Jacobs Enterprises; Ed Dodak, Bandit Industries; Cory Cogswell, also of Bandit; and Tom Clisch Sr. of Tom Clisch Logging.

John Wery (L), Fabick CAT, shows the Cat 564 forwarder to Donald Casperson of Casperson Brothers Logging.

Attendees also stopped by the Fabick CAT display. Caterpillar was a sponsor the Log Load for Kids and Fabick CAT was a major sponsor as well as a co-sponsor of the president’s dinner. Fabick CAT recently announced the merger of Fabick and FABCO Equipment Inc., and the show gave Fabick the opportunity to tell customers how they would benefit from this new partnership. In addition, guests of the show had the chance to stop by the John Deere and Nortrax tent to have their photo taken with L&M Series equipment. The series offers strong and productive forestry equipment. Nortrax was the social media sponsor for the event. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Perry Hughes (R) of Roland Machinery Co. welcomes Ashton Schwartz (L) and Karl Suchovsky of Suchovsky Logging LLC.

Major sponsor Fabick CAT also sponsored the loader champion event, which benefits Log a Load for kids.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 19

SALES - SERVICE - RENTAL - PARTS

Skid Steers Excavators Mini Track Loaders Attachments ALL OF YOUR

www.tristatebobcat.com www.tristatebobcat.com

RENTAL EQUIPMENT NEEDS

RENT IT! TREES, BRANCHES, LIMBS AND STUMPS ARE NO MATCH FOR A BRUSH BANDITT®! Rent the brush chippers and stump grinders that tree care professionals want to own! Get your spring yard work done faster and more efficiently than ever before with a Brush Bandit® chipper or Bandit stump grinder! Choose from different styles an and nd sizes to suit your needs. Tri-State Bobcat – your Authorized Authorized Bandit dealer for Minnesota and Wisconsin. Call today day to reserve yours!

www.tristatebobcat.com www.tristatebobcat.com W WITH ITH THREE LLOCATIONS OCATIONS TI TO S SERVE ERVE Y YOU! OU! NOW OPEN! LocatioU NEW Burnsville Locatio U 1200 Eastt Hwy 13 Burnsville, MN 55337 (952) 894-0894

33P[[SL Canada P[[SL Canada Location 3101 Spruce St. Little Canada, MN 55117 (651) 407-3727

56> 67,N! 56> 67,N! NEW Hudson Location Location /UTPOST #IRCLE /UTPOST #IRCLE (UDSON 7) (UDSON 7)

Page 20 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WITHSTANDS EVERYTHING THE ROAD AND JOBSITE THROW AT IT. American engineered and built in Pella, Iowa, this trailer is your all-in-one jobsite solution for fuel, DEF and service.

Protect Your Heavy Equipment. Invest In Efficiency.

877.879.1490 ThunderCreek.com

800-333-5993 Bill Musgrave Ext. 2210 bmusgrave@altorfer.com Corporate Office Cedar Rapids, IA.

Locations in Iowa, Illinois & Missouri BUY • SELL • CONSIGN • RENT

Complete inventory & photos at:

www.altorfer.com

2009 CAT 312DL, S/N JBC00684, 142U177, 2235 Hrs ........ ......................................................................................$85,000

2005 CAT 143H, S/N APN00558, 158U001, 8539 Hrs .... ............................................................................$121,000

2012 CAT 914G, S/N PDF01727, 144U082, 1553 Hrs .......... ......................................................................................$93,500

2006 CAT 308C CR, S/N KCX01363, 152U050, 3249 Hrs.... ......................................................................................$55,000

1998 CAT D6M LGP, S/N 4JN00820, 151U062, 7903 Hrs .. ......................................................................................$68,500

2004 CAT D6R XW, S/N AEP00405, 151U029, 6705 Hrs .... ....................................................................................$143,000

2005 CAT 14H, S/N ASE01214, 158U008, 5734 Hrs ............ ....................................................................................$209,000

2006 CAT 963C, S/N BBD02835, 143U002, 4873 Hrs.......... ....................................................................................$137,500

2011 CAT 420E IT, S/N DAN00973, 155U009, 779 Hrs ........ ......................................................................................$85,250

2012 CAT CS54, S/N C5R00615, 1412U013, 610 Hrs.......... ....................................................................................$107,250

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 21

(262) 781-3770 Jim King Mobile: (414) 530-0592 13001 W. Silver Spring Drive Butler, WI 53007

SEE PHOTOS

OF OUR

Fax: (262) 781-5053 Email: jking@aring.com

COMPLETE INVENTORY

AT WWW.ARINGEQUIPMENT.COM

2012 Volvo EC480DL, 23' boom, 11' arm, 36" pads, front work lights, mech. suspension seat w/heat, radio w/cd & mp3, rotating beacon, rear camera, climate control w/ac, pilot pattern controls ..........................................................$245,000

2008 Finlay 663 Supertrak, Hydraulic grizzly, portable Finlay screen plant, with hydraulic discharge side conveyors, under screen discharge convevyor, diesel hydraulic self-contained rubber tire tandem axle ..............................................$140,000

1998 Volvo L120C, Cab, Heater, Contronics, F/R Switch, Heated Operator’s Seat, Work Lights, Hydraulic Attachment Bracket, Right Hand Footstep, Towing Hitch, 4cy Bucket w/BOE, 23.5-25 Tires *Bucket only - No Forks* ............CALL

2012 Volvo ECR58, 16” Rubber Tracks, Auto Idling, Heat/AC, Pilot Controls, Counterweight ......................................$65,000

2012 Doppstadt DW3060K, Bio-Power Track Shredder, Cross Belt Magnet, Daimler Chrysler diesel OM 460LA tier IIIB engine, 483 hp, Fuel consumption is approximately 8 gph, Like New, Excellent Condition ..................................$550,000

2007 Volvo L70F, Cab, A/C, Radio w/CD, Operator’s Seat w/Left Hand Armrest, Sliding Window Operator’s Door, Work Lights, Boom Suspension, 3rd Function, Hydraulic Attachment Bracket, Reversible Cooling Fan, Engine Auto Shutdown, Reverse Alarm, Rotating Beacon, Rear Frame Cover Plates, Full Rear Fenders, 100” 2.9cy Bucket w/BOE, 20.5R25 Tires ..................................................................................$102,500

2012 Volvo A40F, A/C, Radio w/CD, Automatic Traction Control, Heated Air Susp Seat w/Armrest, Front Work Lights, Volvo D16H (476hp) Tier 4i Engine, Rear View Color Camera, Electric Hood Opener, Delayed Engine Shutdown, Engine Block Heater, CareTrack Telematics System, 29.5R25 Michelin XADN Tires ................................................................$440,000

2008 Finlay J1175, J1175 portable track crusher, magnet, variable feeder, diesel drive, self contained, hopper wings ...... ..................................................................................$351,000

2011 Volvo L220G, A/C, Radio w/CD, Heated Air Susp Seat, Rear Camera, Electro-Hydraulic Servo Controls, OptiShift, Comfort Drive Control, Boom Suspension, Work Lights, Reversible Cooling Fan, Axle Oil Cooling, Engine Block Heater, Full Rear Fenders, Re-Handling Counterweight, CareTrack Hardware, 134” 8.2cy STE Bkt w/BOE, 29.5R25 Michelin L-4 Tires, Volvo D13H-F (Tier 4i) ....................................$260,000

2011 Volvo SD116DX, Work lights, flow divider, bolt on pad foot shell, inside scrapper, universal scrapper, grill support installation, operating weight 23,930 lbs, vib frequency 1,870-2,018 2012 Cat D6T XLVP, Erops, A/C, Air Suspension Seat, vpm, vibration centrifugal force: 47,900-61,000 lbs, 84" drum Electro- Hydraulic Differential Steer, Work Lights, 3rd Valve, width ............................................................................$92,500 24” ES Pads, VPAT Blade, Winch ..............................$240,000

2012 Volvo L250G, 875/65R29 L4 Good Year tires, eng auto shutdown, eng block heater, radio w/cd, rear camera, comfort drive controls, boom suspension, 140" 8.8CY bkt......$435,000

2005 Volvo L330E, Cab, A/C, Radio w/CD, Air Suspension Seat, Comfort Drive Control, Boom Suspension, Front/Rear Work Lights, Engine Block Heater, Auto Lube, 8.8cy SPN Bucket w/BOE, 35/65R33 Michelin Tires F) XLD D1 L4 80% R) XLD D2 L5 75%..........................................................CALL

2006 Volvo EC460BLC, A/C, Radio, Pilot Control Pattern Change, Work Lights, 36" Pads, 12'10" Stick, Aux Hyd, Geith Pin Grabber, Bucket *no cruncher* ..............................$39,500

2013 Volvo EC300DLR, Long Reach, 33’6” Boom, 25’11” Arm, 36” Triple Grouser Pads, Mech. Susp. Seat w/Heater, Joystick 4 Switches, Rear Camera, Pilot Pattern Control Change, Straight Travel Pedal, Boom Float, CWT 6800kg......$220,000

WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL BREK ZORTMAN (414) 750-3351 FOR MORE INFO.

2008 Volvo A40E, A/C, Radio w/CD, Air Suspension Seat w/Armrest, Front Work Lights, Elec Hood Opener, Delayed Engine Shutdown, 29.5R25 Tires ..............................$298,000

Page 22 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Minnesota State Fair Shows Off Latest Industrial Equipment

ith record Labor Day attendance of more than 170,000, cumulative attendance for the 2015 Minnesota State Fair was 1.7 million. Attendees were brought together in a huge celebration that is unlike any other experience of the year. The State Fair continues to fill a vital role in educating the public on agriculture, innovation, environment and more, while entertaining audiences with attractions, musical performances, thousands of exhibits and hundreds of food options. Located in the north part of the fairgrounds, Machinery Hill housed displays of agricultural and industrial equipment and is now home to the Old Iron Show, a display of dozens of antique tractors, and the interactive Little Farm Hands mock farm exhibit. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

This display features a Kage SnowFire plow system on a Gehl V270.

(L-R): Henry, Elena and Jacob Larson from Woodbury, Minn., enjoy getting a closer look at this John Deere 26C mini-excavator.

Paul Kroening, new regional sales manager of Kubota, Fort Worth, Texas, stands with the popular Kubota SVL track machine.

At the Ariens Gravely display building (L-R) are Bruce Tesmer of MM Lawn & Leisure, Pine Island; Mike Bell, Minnesota Equipment, Ham Lake, Minn.; and Dale Shequen, Ariens Midwest product specialist. On display is the new Gravely JSV 6000 utility vehicle.

Paul Warner, sales engineer of Truck Utilities, St. Paul, Minn., displays this new Hot Patch Gen 2 heated modified Rugby dump body for asphalt patch hot mix. This body is mounted on a Ford F550

This Toro TX1000 compact track machine is a versatile landscape and rental unit that has many attachments for all types of jobs, according to Wade Austin, Tri-State Bobcat special operations manager.

constRuction eQuiPment guide • www.constructionequipmentguide.com • september 26, 2015 • Page 23

coRPoRate HQ

elmHuRst

Joliet

oglesby

RockfoRd

Hammond

635 W. Lake Street eLMhurSt, iL 60126

16822 W. LaraWay rd. JoLiet, iL 60433

590 Mayer St. ogLeSby, iL 61348

5055 South Main St. rockford, iL 61102

6400 indianapoLiS bLvd haMMond, in 46320

call bobby falcone 630-516-4456 www.pattencat.com

USED EQUIPMENT SPECIALS

2012 CAT 262C SKID STEER LOADER SER#: MST04875 $34,000

2012 CAT 336EL TRACK EXCAVATOR SER#: BZY02071 $250,000

2012 CAT 12M2 MOTOR GRADER SER#: F9M00102 $277,500

AC/HEAT, AUX HYDRAULICS, STRAIGHT TRAVEL PEDAL

ROPS, ENCLOSED CAB, GRADE CONTROL, AC

ROPS, AC/HEAT, 2-SPEED, HYD; COUPLER

2008 CAT 953D TRACK LOADER SER#: LBP00239 $170,000

2007 CAT 980H WHEEL LOADER SER#: JMS02813 $162,000

2012 CAT 336EL TRACK EXCAVATOR SER#: BZY00973 $268,750

2012 CAT 906H WHEEL LOADER/TOOL CARRIER SER#: SDH03034 $65,000

CAB, AC/HEAT, GP BUCKET, 19” TRACK

EROPS, AIR CONDITIONING, COUNTERWEIGHT, RIDE CONTROL

QUICK COUPLER, COLD WEATHER START, TOOL CTRL

EROPS, HEAT/AC, BUCKET/FORKS, AUX HYD, RIDE CONTROL

2013 CAT 279C2 SER# KWB00786 $58,500

2006 CAT 430E EX4 BACKHOE LOADER SER# EAT00295 $51,265

2011 CAT 308DCRSB TRACK EXCAVATOR SN# FYC01780 $79,900

2011 CAT 259B3 2AIH SER# YYZ01299 $45,000

HYDRAULICS, STANDARD FLOW, 2 SPEED, AC, HYDRAULIC COUPLER

AC, 4WD, EXT STICK, AUX HYDRAULICS, GP BUCKET, RIDE CONTROL

ENCLOSED CAB, A/C, AUX HYDRAULICS, RUBBER TRACK

QUICK COUPLER, HYDRAULIC HYDRAULICS, STANDARD FLOW, WIDE TRACK, CONTROL, 2 SPD

EROPS, HEAT/AC, AUX HYDRAULICS, HYD COUPLER, STANDARD FLOW

2011 CAT 258B3 2AIH MULTI TERRAIN LOADERS SER#: YYZ00476 $39,000

2011 CAT 420E ST BACKHOE LOADER SER# DJL02211 $69,900

2008 CAT 305CCR AIR TRACK EXCAVATOR SER#: HWJ03191 $32,500

EROPS, STICK, EXTENDED, QUICK COUPLER, 4WD, GP BUCKET, AUX HYDRAULICS

CAB AC/HEAT, AUX HYD, POWER ANGLE BLADE, COUNTER WEIGHT

VISIT

WWW.PATTENCAT.COM

FOR OUR MOST CURRENT INVENTORY LISTINGS.

Page 24 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WEDNESDAY, OCTOBER 21, 2015 21st Annual

N.Y.S. HIGHWAY & PUBLIC WORKS

EXPO PRODUCED BY PROFILE PUBLICATIONS

Lunch Served From 12:00pm - 2:00pm Center of Progress Building • NY State Fairgrounds, Syracuse, NY

Lunch Sponsored By:

Henderson Products • Stadium International Trucks Tracey Road Equipment • Trux Outfitter • Vantage Equipment

First

Dozens of Door Prizes from Exhibitors Win Two Grand Prizes

(2) Grandstand Tickets to NASCAR Watkins Glen Race in August 2016, including (2) Pit Road Passes.

Second

A Pair of Tickets to a Buffalo Bills vs. New York Jets Football Game on Sunday, January 3rd, 2016 in the Jim Kelly Club.

If you don’t have a lunch ticket, one can be purchased for $11 the day of the show.

Call for Exhibit Space Today! Contact: Bob Buckley 800-992-7116 or E-Mail: bbuckley@cegltd.com

Produced by

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 25

Keith Babin and my salesman Craig were AWESOME. They worked very hard to make sure we got the best deal we could. We actuality got two vans, and $2000 for the wrap which turned out great as you can see. I love my new Pro Master 1500. I get people turning their heads and giving me the thumbs up on the highway every time I drive it. Tony Mahmood

2014 RAM 2500 PASSENGER PROMASTER 12 Passenger Capacity, Rear Heat and AC

MSRP $54,745

Knapheide Gooseneck Body

Promaster City

Fall Special $48,095*

Fall Special $33,586*

Fall Special $28,195* Choose from 32

Diesels Here

Promaster 1500 Promaster

Ram 5500

FWD V/6 Auto, P/W, P/L, T/C, A/C

MSRP $34,965

6.4L Gas, Dump bed truck

MSRP $31,025

Fall Special $27,848*

Fall Special $56,988*

Fall Special $25,848*

#1 Chrysler Corp. Commercial Dealer in Minnesota

NOW OPEN Fury Ram Truck Center

18 Cabs and Chassis in Stock More Coming!

RAM H.D. HEADQUARTERS

We Deliver!

The fast lane for small business.

If we don’t have it, we’ll build it for you!

Fury Ram Truck Center, Lake Elmo, Minnesota 651-777-1316 • Visit us at furymotors.com

32 Promasters Ready to Go!

* Pricing represents all Denver business center rebates deducted!

Page 26 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Doosan Community Service Yields 6,500 Pounds of Food Doosan Portable Power employees recently participated in the “Doosan Day of Community Service” — a company-wide volunteer effort that celebrates ongoing partnerships with communities in North America where Doosan Infracore companies do business. Doosan Portable Power is proud to have participated in the event to help make a positive impact in the Statesville, N.C., community. Over a two-week period, Doosan Portable Power employees donated 6,500 pounds of nonperishable food for the Iredell Christian Ministries Food Pantry located in Statesville. The pantry provides 25,000 pounds of food each month to people in the community, and Iredell Christian Ministries serves 800 families a month. “We wanted to make a real difference in our community,” said Mike Ballweber, president of Doosan Portable Power. “Hunger is an issue that no child, adult or family should have to face. We are grateful and humbled for the opportunity to help those in need.” Doosan Portable Power is committed to creating an environment that encourages employees to participate in community involvement. The Doosan Day of Community Service places an emphasis on the “Doosan Way” — an organizational

Over a two-week period, Doosan Portable Power employees donated 6,500 pounds of nonperishable food for the Iredell Christian Ministries Food Pantry located in Statesville.

principle that links all Doosan Infracore employees’ values to a management system focused on community and social responsibility that can be incorporated into their daily

lives. At the heart of the Doosan Way is the idea that being a good corporate citizen is an ongoing responsibility. For more information, visit doosan-

portablepower.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Cemen Tech Marks 9/11 With Utility Explores Option of Commitment to Hire Veterans Using Dam for Electricity Cemen Tech, a manufacturer of mobile concrete mixing systems, announced that it has partnered with Home Base Iowa and Employer Support of the Guard and Reserve (ESGR). The company has committed to hiring veterans who are transitioning out of service to the country and back to civilian life over the next three years. “Cemen Tech recognizes the significant contribution these veterans make to our country and we are honored to be part of Home Base Iowa and the Employer Support of the Guard and Reserve,” said Connor Deering, president and CEO of Cemen Tech. “Veterans exhibit strong leadership skills, integrity and loyalty. Their work ethic is an ideal fit with our company’s core values.” In the coming years, Cemen Tech will be looking to hire veterans to fill roles in engineering, finance, supply, clerical and manufacturing at its headquarters in Indianola, Iowa. Cemen Tech manufactures mobile and stationary concrete mixing systems and silos. Cemen Tech supplies the concrete mixers that the United States Military uses to rebuild the infrastructure around the world.

Home Base Iowa was formed through a partnership between members of Iowa’s military community, Iowa Workforce Development, Iowa Economic Development Authority and the Iowa governor. The program provides veterans with resources to find employment, welcoming communities and ongoing engagement with other military families. ESGR is an agency of the Department of Defense. According to the ESGR, it serves as a proactive liaison between military leaders and employers to address issues and develop solutions to problems that arise because of employee participation in the National Guard and Reserves. For more information on Cemen Tech, visit www.cementech.com. To learn more about the Home Base Iowa program, visit www.homebaseiowa.gov. To learn more about the Employer Support of the Guard and Reserve program, visit www.esgr.mil/iowa. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

DUBUQUE, Iowa (AP) A power utility is considering using a Dubuque dam to generate electricity, part of a nationwide move toward use of renewable energy. Energy Resources USA Inc. has applied for a preliminary permit to build a hydropower plant at Lock and Dam No. 11 on the Mississippi River, the Dubuque Telegraph Herald reported Sept 5. The proposed 19,800-sq.-ft. plant would produce 119,655 megawatt-hours per year — enough to power 10,000 to 11,000 homes. Federal Energy Regulatory Commission spokeswoman Celeste Miller said the permit would give the company the right to explore for three years the feasibility of developing the plant. It would not authorize construction or operations. The commission oversees hydroelectric projects in the United States and is the entity that will consider the permit application, Miller said. The city of Dubuque and residents have 60 days from Aug. 20 to submit comments on the application, motions to intervene or

competing applications. “We are asking council be aware of it,’’ Assistant City Manager Teri Goodmann said. “Staff will do research on our response and will bring that back to council for their approval.’’ Comments on the application may be submitted at www.ferc.gov . Hydropower is the largest source of renewable energy in the United States, providing about 7 percent of the nation’s power, according to the U.S. Department of Energy. But of about 80,000 dams in the United States, only 3 percent have hydropower equipment. Development of hydroelectric power stagnated in the 1980s. But the size of the country’s hydropower fleet has grown over the past decade. At least $6 billion has been invested in refurbishments, replacements and upgrades to U.S. hydropower plants, the Energy Department’s Web site said. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ September 26, 2015 â&#x20AC;˘ Page 27

563-872-4112

(DUBUQUE) BELLEVUE, ELLEVUE, IOWA

WWW.JJSCHECKEL.COM

CLEAN, WORK-READY EQUIPMENT IN IOWA - WE OWN WHAT WE ADVERTISE! NE RENTOR CONVERW SIO ON! BUY!

GET INFORMATION ON ANY MACHINE VIA EMAIL! 9 9 Detailed IInspection nspection R Report eport 9 9 T TA2 A2 P Pressure Testing Report ressure T esting R eport 9 ECM Do Download Report 9 wnload R eport 9 S Service History 9 ervice H istory (when aavailable) vailable) 9 Detailed P Pictures 9 ictures Call emailil C all 563-872-4112 or ema sales@jjscheckel.com sales@j jjscheckell.com

RENTOR

BUY!

2011 CAT 349EL - $24 $245,000 5,000 , 4,600 Hours, Hours, OOriginal riginall pain ppaint,t, 1 OOwner, wnerr, Quick Quickk coupler, coupler p r,, l and str hi Service Service history, history,y, Very Very clean straight aigght machine from from goodd home. home. Rent/Lease Rent/L /Lease or o Buy. Buy. OR

BUY!

RENT

BUY!

RENT

1998 CAT D9R w/631P / P Pull Scraper p 2012 CAT D6T XW,, VPAT V - $189,000 Hours, GPS Accugrade Accugr g adde ready. ready rops p . A/C, Diff Diffff 5,200 Hours, dy. EErops. Priced as a package - $245,000 $ CAT system steer, eerr, 6 Way Way blade, blade, Rear drawbar, drawbar b r, CAT syst y em 1 UC, 7TL Series. Series. 0 Hr EEngine. ngine g . RRigged igged gg ttoo newlyy cconverted/ onverted/ st 1 OOwner, wnerr, Excellent Excellen condition. Rent/Lease Rent/LLease or Buy. Buy. ll t condition. rrebuilt ebuilt 631 pull scr scraper. aperr. EEx Excellent cellen ttoo go go.. ll t UC. UC Ready R OR OR

2011 CAT 336EL - $212,000 $ 1,900 Hrs riginal g l pain ppaint,t, 1 Owner, nerr, SService ervice hhist ory, Hrs,, OOriginal Owner history, ight machine frfrom Very clean andd str aigh om ggood home Very straight home.. BBest est pric i e iin the h mark et. RRent/Lease ent/L t/LLease or BBuy. Buy. price market. OR

RENT

BUY!

2012 CAT 312 EL - $108 $108,000 8,000 , 2013 Deere 350G LC - $188,000 , OOnly nly ly 1,100 hhrs riginal g l pain ppaint,t, Thumb, Thhumbb, 34â&#x20AC;?â&#x20AC;? Bucket, Buckket, 3,600 Hrs riginal g l ppain wnerr, HHydraulic ydr hrs,, OOriginal Hrs,, OOriginal paint,t, 1 OOwner, d aulic l thumb thumb, h , h g r,, AAuxiliary ili y hhydraulics, ili y hy hhydraulics, PPattern attern changer changer, uxiliar yddraulics, FFully u y ser ully serviced. viced. QQuick uick ccoupler, oupler p r,, AAuxiliary uxiliar ydraulics, VVery ery clean & str straight aight SSuper uper clean l ccondition. ondition. Rent/Lease Rent/Lease or Buy. BBuy. machine hi ffrom from goodd home home. h . RRent/Lease ent/L t/LLease or BBuy Buy..

LEASE OR

BUY!

1 OWNER!

RENTOR

RENTOORR

BUY!

2009 CAT D6T LGP - $ $154,000 154,000 , ours, New New sy syst y em 1 rails, rails, VVery ery clean, 5,600 HHours, system l VVery ery i . Sweeps. lly ccorrect straight str aigh g t machine. machine Sweeps. Mechanically Mechanically orrect machine an ourselves. ourselv selv l es. RRent/Lease ent/Leease or Buy. Buyy.. wee rran hi w OR

RENT

BUY!

RENT

BUY!

2011 CAT 324EL L - $155,000 , 2012 CAT 320EL 20EL - $142,000 Only hrs.. Fully l y hydraulics. hhyyddraulics. Only ly 2,100 hrs Fully lly loaded, lloade dedd, AAuxiliary uxiliar 2,200 HHours, ours, 46â&#x20AC;?â&#x20AC;? bucket, bbucket, 9â&#x20AC;&#x2122;6â&#x20AC;?â&#x20AC;? stick buck ear view stick, k, A/C, rrear uick oupler pl r.. 9â&#x20AC;&#x2122;9â&#x20AC;?â&#x20AC;? stick stick, QQuick i k ccoupler. i k, longg and wide id UC. ccamera, amera, AAux ux hhydraulics ydraulics aavailable, vailable, VVery ery nic nicee machine machine,, i Rent/L /Lease or Buy. BBuy. FFully Extra owner! Ex tra clean, single owner! Rent/Lease /Lease or Buy ully ser viced, Ex cellent ccondition. ondition. RRent/Lease ent/L serviced, Excellent Buy.. OR OR

RENT

BUY!

2007 Deere 270D D LC - $82,000 , paint, 7,200 HHours, ours, OOriginal riginal g l ppain aint, QQuick uickk ccoupler, oupler l r,, changer, h g r,, NNi Nicee machine machine.. PPattern attern changer Nic RRent/Lease ent/L /Lease or Buy Buy..

RENTOR

BUY!

2010 CAT 980H - $159 $159,000 9,000 2011 CAT 420E IT - $72,000 , 2010 CAT CP56 6 - $88,000 , 10,800 Hrs Hrs,, OOriginal riginal g l pain ppaint,t, A/C, AAuto uto shif shift, h ft, RRide ide d ccontrol, ontrol, OOriginal riginal g l oowner, wnerr, OOnly nly l 1,900 hhrs hrs,, 4WD 4WD,, FFull ullll options options, p , Original b atory pad Original g l oowner wner & paint. pain p t. 84â&#x20AC;?â&#x20AC;? Vibratory Vibr p d ffoot oot drum. drum. GGood ood rrubber, ubber b r, GP buck bbucket, ket, NNew ew ccutting uttingg edge g ,W ell AAuxiliary edge, Well uxiliar li y hhydraulics yddraulics ffrfront ont + rrear, earr, TTool ool ccarrier, arrier i r, GP buck bbucket. ket. EEnclosed nclosed cabb, A/C A/C, FFront ront blade blade option. p i VVery ery well well l d cab, main maintained, tained, FFully ully ser serviced. viced. LLease easee or Buy BBuy.. DDeluxe eluxe enclosed ccab. ab. Ex Extendahoe, tendahoe, QQuick uick ccoupler. ouplerr. maintained. main tained. 3,900 HHours. ours. 27,500 27 27,,500 500 lb operating operating weight. weight.

2012 CAT D6N LGP - $ $165,000 165,000 3,800 Hours, ccugr g ade rready. eadyy. EErops, rops p , SSweeps, weeps, A/C, Hours, GPS AAccugrade steer, li , Rear dr drawbar, b r, CCat DDiff iff st eerr, AAux ux hhydraulics, ydraulics awbar at SSystem yystem 1 Excellent Buy. UC, 1 OOwner, wnerr, Ex cel ellent ccondition. ondition. RRent/Lease ent/Lease or Buy y.. OR

RENT

BUY!

2006 Deere 2 200D 00D LC - $84,000 , 5,900 Hours, Hours, Original Original g l paint, ppaint, 9â&#x20AC;&#x2122;6â&#x20AC;?â&#x20AC;? SStick, tickk, LLong ongg andd wide under undercarriage, carriage g , 48â&#x20AC;? 488â&#x20AC;?â&#x20AC;? Bucket, Bucket, A/C, Nic Nicee machine machine. hi . RRent/Lease ent/Lease or Buy Buy..

RENTOR

2014 CAT AT 316EL - $110,000 3,800 Hrs riggginall ppain uckket, PPattern attern Hrs,, OOriginal paint,t, 58â&#x20AC;?â&#x20AC;? BBucket, changerr, FFully ullyy ser vici edd, SSuper uper p clean ccondition. ondition. changer, serviced, RRent/Lease ent/Lease or Buy. Buy.

ISHED! REFURBIS

1994 CAT AT 992D - $470,000 , Fully work Fullyy refurbished, refurbished f b h d, $352,000 w orkk order ordder just j spent. spen p t. our main ccomponents. 2 New tires! 2,000 HHour omponen p ts. New tiri es!! Call for uments. Call documents. for doc

USED AND RECONDITIONED PARTS HOTLINE

BUY!

2006 CAT C CS563E S563E - $62,000 , paint.t. 84â&#x20AC;?â&#x20AC;? Vibratory b atory smoothh ddr drum. OOriginal riginal g l ppain Vibr um. heat,t, VVery well maintained. EEnclosed nclosedd ccab, abb, A/ A/C + hea ery w ellll main tained. 4,500 Hours. Hours. 27,500 500 lb operating operating weight. weight.

Genuine OEM Cat Genuine Cat FFull ull aavailability vailability of used CAT CAT par parts, ts, 50% off list list,, car carriers, riers, housings housings,, gears gears,, et etc. c. Also A lso huge selection selec election of attachments attachments and d ccomponents omponents in stock. stock. IIff w we e don donâ&#x20AC;&#x2122;t â&#x20AC;&#x2122;t ha have ve it, it, we we will find it! Parts P arts loca locating ting ser service. vice. Call C all Matt Meyer Meyer 563-872-4112

VISIT OUR WEBSITE FOR DETAILED PHOTOS AND DESCRIPTIONS! WWW.JJSCHECKEL.COM The highest quality, most complete, most detailed, proprietary reman program in the world! SSR SCHECKEL SERIES REMAN MACHINES S IN PROGRESS NOW! Â&#x2DC;Â&#x2DC; jEk 11R jEk 11R 7P 7PZ Z SSeries eries Â&#x2DC;Â&#x2DC; jFk 10Râ&#x20AC;&#x2122;s AKTT SSeries eries jFk 10Râ&#x20AC;&#x2122;s AK Series Â&#x2DC;Â&#x2DC; jFk M 5 jFk M 5 7TL & ABK Series We We also perform perform C Cat at 777D 777D, D,, C Cat at 992 D/G & C Cat at 16 G/H Remans Remans on a rregular egular basis basis. s.. C Custom ustom builds performed performed tto o me meet et cust customerâ&#x20AC;&#x2122;s omerâ&#x20AC;&#x2122;s exact exxac act requirements, requirementss, sp specs, ecs, a and nd budgets. budgets. Call Call 563-872-4112 or email email sales@j sales@jjscheckel.com jjsche jscheckell.com for a brochure! brochure!

J.J. SCHECKEL RENTS

No Borders, No Boundaries. Partner with us! Your source for Nationwide Rentals:

Â&#x2DC; EX GX 14 J 106* 1064#%65X #6 Â&#x2DC; EX GX 14 J 106* 1064#%65X #6 Discounte Discounted d Rent Rates Rates Â&#x2DC;Â&#x2DC; '06 74%*#5' 26+105X 9+6* ENNÂ&#x2020; '06 74%*#5' 26+105X 9+6* ENNÂ&#x2020; FFinancing inancing Â&#x2DC; *146 14 10) '4/ '#5'5 Â&#x2DC; *146 14 10) '4/ '#5'5 Â&#x2DC;Â&#x2DC; ' #-' +6 61 '06 (41/ 75 ' #-' +6 61 '06 (41/ 75 Q Quick uick Mobilization - D Delivered elivered to to your your site, site, set up up, p, a and nd ready read dy tto o go. go. C Cost ost EEfficient, fficientt, Expand Expand d your your capabilities capabilities with our eequipment! quipment!

Ph: 563-872-4112 | Fax: 563-872-5058 | sales@jjscheckel.com ssales@jjscheckel.com | 21582 Hwy 62,, Bellevue, Bellevue, Iowa Iowa 52031 | www.jjscheckel.com www w.jjscheck w.jjscheckel.com

Page 28 â&#x20AC;˘ September 26, 2015 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

For all your equ equipment ipment needs Ĺś Clean, well maintained rental fleet Ĺś Ĺś Extensive inventor inventoryy of new and used equipment CONSTRUCTION EQUIPMENT AND MORE

Loader backhoes

Excavators

Wheel loaders

Compact excavators

Compact track loaders

Contact the Southeastern Equipment location nearest you today! Kentucky

Michigan

Ohio

#M BODIBS E.BDIJ OFS Z DPN 6T FE

#"/$)"3%

#"/$)"3% 64& % & 26* 1.& /5

5 )& ' 06/%"5 * 0/ 0'

"/: (00% 803, 4* 5 &

s Street sweepers s Asphalt distributors s Chipspreaders s Recyclers s Stabilizers s Pavers s Wood chippers s Sewer trucks s Hydro excavators

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 29

Page 30 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

New Alignment Starts in Marshall County, South of U.S. 6 CORRIDOR from page 1

neer Trevor Mills, “and to improve safety on U.S. 31 between U.S. 30 and U.S. 20. It was also important to determine consistency with statewide (INDOT) and regional (MACOG) transportation plans, with MACOG being the South Bend Area Metropolitan Planning Organization. “The total project cost (design, right of way acquisition and construction) of the project is $314 million,” he said. “The first public information meeting was held in 2002, and there was a public demand to make U.S. 31 a freeway from Indianapolis to South Bend. The U.S. 31 Coalition was established as an advocacy group and it is comprised of local towns, counties, officials and businesses.” In 2000, the traffic on this stretch of road was 40,516 vehicles per-day and it is projected to be 51,906 vehicles per-day in 2030. An investment study concerning the project was initiated by INDOT in 1992 and was completed in 1998. “The ROD process started in 2002 and was completed in 2006,” said Mills. “The old section of U.S. 31 in Marshall County has been relinquished to the locals and the section in St Joseph County was not relinquished — the locals didn’t accept the offer and it will be maintained by INDOT.” Communications between Rieth-Riley and INDOT were critical to getting around some of the hurdles that were encountered. “We hold bi-weekly progress

meetings with the contractor to discuss construction schedule, request for clarifications, and change orders,” said Brad Taylor, INDOT, area engineer, pointing out that INDOT had several engineers and other personnel on-site. “Because new alignment projects don’t happen very often, it’s a good opportunity for INDOT employees to be exposed to a wide range of construction in a short time.” Todd Kulczar, RR’s sales manager (estimator/project manager), has been with the project since the beginning. “There were a few segments done by other contractors but we probably did about nine miles out of the total. The majority of the new road was shifted about a half mile east and it passed through farm fields.” The contract currently is valued at $25 million, covering 1.5 mi. (2.42 km) of roadwork and work to tie-in both ends of the new alignment. “The biggest challenge for us was that the projects were let prior to some property acquisitions and some utility relocations,” said Kulczar. “We had to re-phase or change the way the project was being built to go around some properties that were not available and await utility relocations. But we kept the project moving — this often happens on such projects — and INDOT gave us the help we needed to make things work. “All of the contracts were bid competitively and everything had to be low bid,” said Kulczar. “We

Matt Deitchley, communications director, INDOT photo

The contract currently is valued at $25 million, covering 1.5 mi. (2.42 km) of roadwork and work to tie-in both ends of the new alignment.

put forward solid bids, but it helped that we were already on the job. This helped in the bidding because we knew what our capa-

bilities were and the conditions, which helped us establish our production rates. “There were some soil issues

where we had to change the game plan to accommodate stability and we ran into some undesirable soils which were removed — there was not a lot of it and we gave it to anyone who wanted it,” said Kulczar. “Most of the earth was hauled in because the road was built over farm fields and used as fill for the roads. Some morrow pits were dug in several locations.” The contractor also was responsible for some utility work, including underground work for water drainage. “They ditched most of this,” said Kulczar, “but there was quite a bit, especially in the urban area in the north end, where we had to install some box culverts to have the drainage system pass through the community. For the roads on the farmland, we installed some under-drain pipes to complement the ditch/burrow pit system.” The 19 new bridges that RR was responsible for are scattered along the highway, with four at the south end and at the north end. The major bridges, along with ramps and shoulders, are located in the urban areas to ensure that local roads are not impacted. The bridges, two lanes in each direction, are based on basic designs based on either steel or concrete. “We built a couple at a time,” said Kulczar, “and as we moved, we wanted to bring it to the next bridge so that it could be recycled.” According to Taylor, “The muck trussel bridges were built to span a large peat deposit and it took see CORRIDOR page 91 Matt Deitchley, communications director, INDOT photo

Walsh had a concrete plant on site to do the concrete paving.

Matt Deitchley, communications director, INDOT photo

The project, initiated by the Indiana Department of Transportation (INDOT), is to build a new section (alignment) of the highway — 22 mi. (35.4 km) — in St. Joseph and Marshall counties. The new alignment starts in Marshall County, just south of U.S. 6 and goes into St. Joseph County, where it ties into the U.S. 20 bypass.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 31

BAD CHOICES CAN BURY YOU

Not using Cat® filters can lead to some messy situations. This guy didn’ didn’tt use a Cat filter in his Cat machine and now he’ss paying the price. What’ he’ What’ss worse? He could pay an even bigger price down the road because Cat filters protect like no other other.. Which is why you should always use them. And if you don’ don’tt … you could get buried. Find out what makes Cat filters so important at ChooseCatFilters.com. CA ATT FILTER FILLTER TER and a GET ONE FREE | Get FREE Cat Gloves | Enter to win FREE Cat Filters & Fluids for a year* Buy ONE CAT Helping Cat machines lead long and productive lives – that’ that’s ’ss what we’re built to deliver del deliver. liverr.. *VOID WHERE PROHIBITED. NO PURCHASE NECESSARY TO ENTER OR WIN. A PURCHASE WILL NOT INCREASE YOUR CHANCES OF WINNING. Please see complete official promotion rules at ChooseCatFilters.com. © 2015 Caterpillar Caterpillar.. All Rights Reserved. CAT, CAT, CATERPILLAR, CA ATERPILLAR, TE ERPILLAR, BUILT BUILLTT FOR IT IT, T,, their respective logos, “Caterpillar Y Yellow,” ellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Page 32 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

YOUR SOURCE FOR

SALES AND RENTALS CRAWLER TRUCKS, STUMP CUTTERS AND FORESTRY MULCHERS

Atlas Copco USA’s ‘Water for All’ Celebrates 31st Anniversary

800.392.2686

In honor of its 31st anniversary, the Atlas Copco USA employee-run Water for All organization has donated $50,000 to Denver-based charity Water for People. The donation will fund clean water and sanitation projects in Nicaragua. “Atlas Copco is committed to global sustainability and the Water for All program is just one way our employees act on that commitment,” said Jim Levitt, president of Atlas Copco North America. “We are proud to support organizations like Water for People, who are committed to helping create a world where all people have access to clean water, adequate sanitation and basic health services.” While Nicaragua is the largest country in Central America with a population of more than six million, it also is the poorest. The $50,000 donation will help fund a program that is focused on bringing clean drinking water, toilets and hand washing facilities, as well as hygiene education, to three schools and five communities in Nicaragua. The donation will directly impact the municipal-

ities of San Rafael del Norte and La Concordia in the department of Jinotega. Atlas Copco’s employee-run Water for All organization raises money to support projects and organizations that provide people in need with access to safe, clean water and sanitation. Since 2010, Water for All USA has donated a total of $711,000 — with $532,000 donated in just the past two years — to combat the global water crisis and bring clean drinking water to approximately 36,000 people. The organization is represented in 35 countries with approximately 5,000 employees who donate annually. Donations are boosted by the Atlas Copco Group, which double-matches employee donations. One hundred percent of employee donations go directly into funding clean water projects. For more information, visit www.atlascopco.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ September 26, 2015 â&#x20AC;¢ Page 33

Powerful. Reliable. Kubota.

1998 CAT 980G: EROPS HEAT AND A/C, 4 SPD POWERSHIFT TRANS, HALF STEER, 6 YARD G.P BUCKET, FLOAT OPTIONS, 29.5X25 RADIAL TIRES ................$69,500

2000 PARKER 1000X625 JAW CRUSHER, CAT POWER 3306, 6X13 VIBRATING GRIZZLY FEEDER, HOPPER EXTENSIONS ................$115,000

2005 DEERE 744J WHEEL LOADER, CAB HEAT AND A/C, RIDE CONTROL, 5.5 YARD G.P BUCKET, BACK UP CAMERA, S/N: 597XXX ........$79,500

1999 LEDWELL BEAVER TAIL TRAILER, WOOD FLOOR; 255/70R22.5 TIRES; ALUMINUM WHEELS; FIXED TRI AXLE; FIXED NECK; HYDRAULIC TAIL; 40 TON 3 AXLE, AIR RIDE, HYDRAULIC BEAVER TAIL, 48'X 8'6" ..........$29,500

2003 CASE CX225SR LC EXCAVATOR, CAB HEAT AND A/C, 9' 6" STICK, LONG AND WIDE, DIGITAL DASH, 28" PADS, ZERO TURN TAIL SWING, Q/C HYD, HOURS: 6,300, S/N: 5132 ........ ..............................................$69,500

2000 TRAIL KING 55 TON TRAILER, DETACHABLE NECK; 255/70R22.5 TIRES; TRI AXLE; 55 TON TRAIL KING TRI AXLE, 3RD AXLE LIFT, COVERED AXLES, 102" WIDE 22' WELL, AIR RIDE ......................................$36,500

1999 MOXY MT40B OFF HIGHWAY TRUCK

1999 TEREX TA35 OFF HIGHWAY TRUCK, 6X6, ARTICULATED-TRUCK, 35 TON, HEAT & A/C, 26.5-26 TIRES@70%, DETROIT 60 SERIES 350 HP, HORSEPOWER: 350, CAPACITY: 35 TN, S/N: A77XXXXX ..............$49,500

2015 PITTS CONTENDER TRAILER, DETACHABLE NECK; WOOD FLOOR; 2015 PITTS CONTENDER 55TON LOWBOY, 26' WELL 8.5' WIDE, TRI AXLE, OUTRIGGERS, NON GROUND BEARING NECK, BOOM WELL, 3RD AXLE LIFT, ALLUMINUM WHEELS, SUSPENSION: AIR RIDE ................................$59,500

2009 CAT 930H WHEEL LOADER, EROPS HEAT AND AC, LIKE NEW 20.5X25 RADIAL TIRES @ 80%, RIDE CONTROL, QUICK COUPLER, AUX HYDRAULICS, HOURS: 3,500 ............ ............................................$119,500

2006 EXTEC 42X32 CRUSHER, CATERPILLAR 3306, 6 FT X 16 FT FDR, HOPPER WINGS, 42 IN. X 30 FT FRT DISCH FOLDING CONV, TRI/A CHASSIS, S/N: 4312 ....................$142,500

1998 CAT D6R LGP DOZER CRAWLER, REMAN TRANSMISSION, EROPS HEAT AND A/C, STRAIGHT BLADE W/TILT, 36" PADS, 50% U/C, SEALED LUBE TRACKS, S/N: 9PN-00725 ......$57,500

2013 HIPOWER HRJW310T6 GENSET, MANY SMALLER UNITS AVAILABLE, HI POWER 309 KVA, 480 VOLTS 3 PHASE, 120 VOLTS SINGLE PHASE, 120V RECEPTACLES, JOHN DEERE 6090 ENGINE, HOURS: 5,800, S/N: U113 ......................................$32,500

2009 VOLVO L60F WHEEL LOADER, EROPS, HEAT AND A/C, QUAD AUXILLARYS, Q/C, RIDE CONTROL FLOAT OPTIONS, NICE MACHINE 20.5X25 TIRES 70%, HORSE POWER: 153 ...... ..............................................$79,500

2004 VOLVO L220E WHEEL LOADER, EROPS HEAT AND A/C, RIDE CONTROL, 7 YARD G.P BUCKET, 70% 29.5X25 TIRES 4 SPD POWERSHIFT, S/N: 2021 ......$69,500

Clean-running Industrial Engines from 5.6 to 99 HP EM, Irrigation, Replacement dustrial Power Applications

Your completee source of engine and gen generator nerator power

1-855-CKPOWER (1-855-257-6937)

w w w.ckpower.com

$PHULFDÂ·V 7UHQFK %R[ %XLOGHUâ&#x201E;¢ (IÃ&#x20AC;FLHQF\ 3URGXFWLRQ ,QF

7KH &RQWUDFWRUÂ·V &KRLFH IRU 7UHQFK 6KRULQJ 1DWLRQZLGH! Â&#x201E; /DUJHVW VHOHFWLRQ RI VKLHOGLQJ DQG VKRULQJ HTXLSPHQW DYDLODEOH Â&#x201E; &XVWRP VKLHOGV EXLOW WR \RXU VSHFV Â&#x201E; 6LWH 6SHFLÂ¿F (QJLQHHULQJ Â&#x201E; 26+$ 7UHQFK 6DIHW\ 7UDLQLQJ Â&#x201E; 2XU ([WHQVLYH 'HDOHU 1HWZRUN DQG )DFWRU\ 'LUHFW 6DOHV 5HQWDOV FRPELQH WR VXSSO\ WKH HQWLUH 8QLWHG 6WDWHV ZLWK IDVW GHOLYHU\ DQG H[FHOOHQW VHUYLFH

Build-A-Boxâ&#x201E;¢

Steel Trench Shields

Slide Rail System

800-552-8800 ZZZ HIÂ¿FLHQF\SURGXFWLRQ FRP +XOO 5G 0DVRQ 0,

Page 34 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Case 1550 Dozer, 1:16 Scale - $100

Caterpillar 365C L Front Shovel, 1:50 Scale - $110

John Deere 470G LC Excavator, 1:50 Scale - $85

Komatsu WA500 Wheel Loader, 1:50 Scale - $90

Allis Chalmers HD-21 Dozer, 1:50 Scale ......................................$100

Caterpillar D11R Track-Type Tractor, 1:50 Scale ........................$100

John Deere 400D Articulated Dump Truck, 1:50 Scale................$50

Allis Chalmers TS-300 Motor Scraper, 1:50 Scale......................$100

Caterpillar D250E Articulated Truck (NZG), 1:50 Scale ............$125

John Deere 460E Articulated Dump Truck, 1:50 Scale................$70

Barber Greene 260C Wheeled Paver, 1:50 Scale........................$185

Caterpillar MH3049 Material Handler w/magnet, 1:50 Scale ....$140

John Deere 624J Military Wheel Loader, 1:50 Scale....................$40

Bobcat S530 Skid Steer Loader, 1:25 Scale ..................................$45

Caterpillar 428B Backhoe/Loader(NZG), 1:50 Scale ....................$75

John Deere 850C Dozer, 1:50 Scale ................................................$45

Bobcat T550 Track Loader, 1:25 Scale............................................$60

Caterpillar 428C Backhoe/Loader (NZG), 1:50 Scale ..................$75

John Deere 66575 Skid Steer Loader, 1:50 Scale ........................$45

Bobcat S570 Skid Steer Loader, 1:25 Scale ..................................$45

Caterpillar 438C Backhoe/Loader (NZG), 1:50 Scale ................$135

John Deere MC Crawler Dozer, 1:16 Scale..................................$100

Bobcat 743B Skid Steer Loader, 1:25 Scale ..................................$40

Caterpillar PR-450 Pavement Profiler (NZG), 1:50 Scale ..........$135

Komatsu CK25 Compact Track Loader, 1:50 Scale ....................$45

Bobcat 7753 Skid Steer Loader, 1:25 Scale ..................................$45

Caterpillar 511OB Excavator, 1:50 Scale ......................................$115

Komatsu D51 EX Dozer, 1:50 Scale ................................................$80

Bucyrus Erie 22B Cable Backhoe, 1:50 Scale ............................$250

Caterpillar 621K Motor Scraper, 1:50 Scale................................$150

Komatsu D51PXi-22 Dozer, 1:50 Scale ..........................................$85

Case 1102 Vibromax Roller, 1:35 Scale ..........................................$75

Caterpillar 631E Motor Scraper, 1:50 Scale ..................................$50

Komatsu D155AX Dozer w/ripper, 1:50 Scale ..............................$95

Case CX210C Excavator, 1:50 Scale ..............................................$50

Caterpillar 775G Off-Highway Truck, 1:50 Scale ........................$120

Komatsu D375A Dozer, 1:50 Scale................................................$100

Case CX250C Excavator, 1:50 Scale ............................................$175

Caterpillar 920 Wheel Loader (Conrad), 1:50 Scale....................$110

Komatsu GD655 Motor Grader, 1:50 Scale....................................$90

Case 330D Articulated Dump Truck, 1:50 Scale ..........................$50

Caterpillar 980G Military Wheel Loader, 1:50 Scale ....................$60

Komatsu HM400-3 Articulated Truck, 1:50 Scale ......................$100

Case 580 ST Backhoe/loader, 1:50 Scale ....................................$100

Caterpillar 988B Wheel Loader, 1:50 Scale....................................$60

Komatsu PC200-8 Excavator, 1:50 Scale ....................................$125

Caterpillar 16G Motor Grader (NZG), 1:50 Scale ........................$135

Caterpillar 988F Wheel Loader (NZG), 1:50 Scale ......................$115

Komatsu D475A Dozer, 1:50 Scale ................................................$115

Caterpillar 140H Motor Grader, 1:50 Scale ....................................$75

Caterpillar 5080 Shovel, 1:50 Scale ................................................$70

Komatsu WB146 Backhoe/Loader, 1:50 Scale..............................$75

Caterpillar 325L Excavator (NZG), 1:50 Scale ............................$160

Dynapac SD2500 CS Road Paver, 1:50 Scale ............................$125

Link Belt 250 X3 Excavator, 1:50 Scale ........................................$150

Caterpillar 340D L Excavator, 1:50 Scale ....................................$150

Grove TM1500 White 6 Axle Crane, 1:50 Scale ..........................$140

O&K RH9 Excavator, 1:50 Scale ......................................................$75

Caterpillar 365B L Series II Excavator, 1:50 Scale......................$100

Hamm 3414 Pad Foot Compactor, 1:50 Scale ..............................$90

Terex 33-07 Off-Highway Truck (NZG), 1:40 Scale........................$75

Caterpillar TH407C Telehandler, 1:32 Scale ................................$100

Hyundai 210LC-9 Excavator, 1:40 Scale ......................................$100

Vogele 1900-2 Road Paver, 1:50 Scale ........................................$140

Caterpillar 428 Backhoe w/Hammer, 1:50 Scale ..........................$50

International 175 Crawler w/Demo Bucket, 1:25 Scale..............$150

Vogele 2100-3 Road Paver, 1:50 Scale ........................................$145

Caterpillar 980K Wheel Loader, 1:50 Scale..................................$125

International 350 PayHauler, 1:50 Scale ......................................$225

Vogele MT3000-2i Power Feeder, 1:50 Scale ..............................$145

Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy Trailer,

International 560 PayLoader, 1:50 Scale ......................................$140

Volvo A40F Articulated Hauler, 1:50 Scale ..................................$120

1:50 Scale ..........................................................................................$110

International TD-14 Crawler Dozer, 1:16 Scale............................$140

Volvo A40F Articulated Dump Truck, 1:50 Scale ........................$110

Caterpillar D6K XL Track-Type Tractor, 1:50 Scale ......................$65

JCB 190 Skid Steer Loader, 1:35 Scale ..........................................$65

Volvo L60G Wheel Loader, 1:50 Scale............................................$90

Caterpillar D6R Track-Type Tractor, 1:50 Scale ............................$90

JCB 467 WLS Front End Loader, 1:50 Scale ..............................$120

Volvo L220G Wheel Loader, 1:50 Scale........................................$120

Caterpillar D7E Track-Type Tractor, 1:50 Scale ............................$85

JCB 531 Loadall W/Bucket, 1:35 Scale ..........................................$80

Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale ..........$120

Caterpillar D10N Track-Type Tractor, 1:50 Scale ..........................$50

JCB 930 Rough Terrain Fork Lift, 1:35 Scale ................................$50

Wirtgen 240 Recycler, 1:50 Scale ..................................................$140

Caterpillar D10 Track-Type Tractor (Conrad), 1:50 Scale ..........$185

John Deere 315SJ Backhoe/Loader, 1:50 Scale ..........................$40

Wirtgen WR2000 Recycler, 1:50 Scale..........................................$100

Shipping and Handling Included

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 35

2011 Case 580SN, 978 Hrs, stk# S00901 .............. ....................................................................$79,500

2013 Case 580SN T4A, 1125 Hrs, Stk# P07923 .... ..................................................................$84,000

2003 Deere 310SG, 7357 Hrs, Stk# P08145 .......... ..................................................................$36,500

2012 Case SR175, 1320 Hrs, Stk# P07497 ............ ..................................................................$32,000

2013 Case SR200, 193 Hrs, Stk# P06101 .............. ..................................................................$37,900

2007 Case 650K III, 1960 Hrs, Stk# P07303 ........ ..................................................................$59,500

2003 Case 580SM, 6461 Hrs, Stk# P08113 .......... ..................................................................$35,750

2013 Case 580SN, 172 Hrs, Stk# P05875 .............. ..................................................................$99,500

Kansas City, MO

Joplin, MO

Springfield, MO

Wichita, KS

Topeka, KS

Garden City, KS

Fort Smith, AR

816-448-2206

Custom Made Products Co. Humboldt, IA Lease To Own

(800) 760-7871 Call Anytime

www.gncmp.com t ͛s 'Kd zKh Ks Z ͘

100+ Scrapers on Hand at 15 Locations FOR SALE OR FOR RENT Locations: Humboldt, Bayard, DeSoto, Iowa Falls, Liscomb, Manchester, Britt, Osceola, Sac City, Woodbine, Readlyn, Chariton, Fremont, Newton & Wayne, NE

We Will Not Be Undersold!

Free Delivery!

18 yd Ashland I-180 TS2s (New & Used) Call

13 yd Ashland I-130 XL2s (New & Used) Call

GRADERS

HOLCOMB

Art’s-Way Graders, (New & Used) ................................................Call Johnson Graders (New & Used)....................................................Call 8’-16’ With & Without Rear Steer

8 yd to 16 yd..................................................................................Call

ASHLAND 18yd Ashland I-180 TS2s, (New & Used) ....................................Call 17 1/2yd Ashland I-175 XL2, (New & Used) ................................Call 15 1/2yd Ashland I-155 TS2s, (New & Used) ..............................Call 15 1/2yd Ashland I-155 XL2s, (New & Used) ..............................Call 13yd Ashland I-130 TS2s, (New & Used) ....................................Call 13yd Ashland I-130 XL2s, (New & Used) ....................................Call 11yd Ashland I-110 TS2s, (New & Used) ....................................Call 11yd Ashland I-110 XL2s, (New & Used) ....................................Call 9 1/2yd Ashland I-950s, (New & Used) ........................................Call Ashland Groundhog GH2500, (New & Used) ................................Call

GARFIELD 12yd Garfield Model 1150s, (Used)..............................................Call 13yd Garfield 1350s, (New & Used) ............................................Call 8yd Garfield Model 850s, (New & Used)......................................Call 5yd Garfield Model 550s, (New & Used)......................................Call

tĞƐƚ ^ŝĚĞ WD WůƵƐн dŽƚĂů ĂƌĞͶtĞƐƚ ^ŝĚĞ dƌĂĐƚŽƌ͛Ɛ ŶĞǁ ĐƵƐƚŽŵŝǌĂďůĞ ŵĂĐŚŝŶĞ ƐƵƉƉŽƌƚ ƐŽůƵƟŽŶͶ ďƵŶĚůĞƐ ƉƌĞǀĞŶƚĂƟǀĞ ŵĂŝŶƚĞŶĂŶĐĞ͕ ĞǆƚĞŶĚĞĚ ǁĂƌƌĂŶƚǇ ĂŶĚ ŵĂĐŚŝŶĞ ŵŽŶŝƚŽƌŝŶŐ ƚĞĐŚŶŽůŽŐǇ͘ dŚƌĞĞ ďƵŶĚůĞƐ ŽĨ ƉƌŽƚĞĐƟŽŶ ƚŽ ĐŚŽŽƐĞ ĨƌŽŵ͕ ŽŶĞ ůŽǁ ƉĂǇŵĞŶƚ͘

BIG DOG 8 yd Big Dogs, (New & Used) ......................................................Call 6 1/2 yd Big Dogs, (New & Used) ................................................Call 5 yd Big Dogs, (New & Used) ......................................................Call 12’ Feedlot Box Scrapers..............................................................Call 10’ Feedlot Box Scrapers..............................................................Call 12’ Box Scrapers ..........................................................................Call 10’ Box Scrapers ..........................................................................Call 8’ Box Scrapers ............................................................................Call

IRONWOLF 8-12 yd ..........................................................................................Call

LEON 10-13 1/2 yd ..................................................................................Call

ROWSE 7 yd Rowse Model 7002 & 7004 ..................................................Call 5 yd Rowse Model 7002 & 7004 ..................................................Call 3 yd Rowse Model 3002................................................................Call

MISCELLANEOUS 1 1/2 yd, 3 yd & 4yd Durabilts, (New & Used) ............................Call 3/4 yd G&A Mini Scraper, (New & Used)......................................Call

dŚĞ :ŽŚŶ ĞĞƌĞ ŽŶƐƚƌƵĐƟŽŶ Θ &ŽƌĞƐƚƌǇ ĞĂůĞƌ ĨŽƌ /> Θ /E

Page 36 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

HIGH QUALITY USED EQUIPMENT

AT HOME ON ANY RANGE Wherever the job takes you, our variety of surface crawlers will fit right in. 800-732-6762 www.atlascopco.us

MJ003041

MA21114

2008 140 M 7966 HRS ............ $135,000 2010 140M 2137 HRS ..............$150,000 BASE & 3 F UNCTIONS, RIPPER, B S 14.00R24 VUT @ 98%

BASE & 4 FUNCTIONS, TIRES 1424 VUT

MB20732

2010 160 M AWD 6122 HRS ... $200,000 2011 CA ATT 336EL 2,337 HRS ......$280,000

BASE & 4 FUNCTIONS, BS 17.5R25 VUT, NEW

CA AT 48” BUCKET W/QUICK COUPLER, U/C @ 85% REMAINING

MJ003450 MJ003408

MA16776

2012 D8T 5359 HRS .................$465,000 2010 CA ATT D7E 2,815 HRS.......... $305,000

MULTI SHANK RIPPER WITH 2 SHANKS, 24” TRACK SHOES, U DOZER, U/C 50% PLUS REMAINING

Butler ButlerIRON.com I RO N .com

MULTI SHANK RIPPER WITH 2 SHANKS, SU DOZER BLADE, U/C 50% REMAINING

Lenny Mattern 701.298.1730

Bill Bauer 701.298.1767

NJPA Awards Equipment Contract The National Joint Powers Alliance (NJPA) contract will allow Volvo Construction Equipment to better serve state and municipal customers by streamlining access to equipment from the entire Volvo product line. The NJPA is a public agency that serves as a member-focused cooperative for more than 50,000 member agencies throughout the United States, as well as Alberta, Manitoba and Ontario, Canada. The agency administers cooperative purchasing contracts that allow states and municipalities to purchase equipment without having to go through their own solicitation process. The contract comes as Volvo increasingly serves government customers, seeing its governmental business through buying contracts more than double year to year since 2012. “The NJPA contract is just one more way Volvo Construction Equipment can better serve government and municipal clients with our extensive equipment offering,” said Kathy Tedone, government buying contract specialist. “Through our North American network of dealers, government clients now have access to our

The National Joint Powers Alliance (NJPA) contract will allow Volvo Construction Equipment to better serve state and municipal customers by streamlining access to equipment from the entire Volvo product line.

full equipment line-up with an NJPA discount off list price. This includes everything from excavators, wheel loaders and skid steer loaders, to articulated haulers, pavers and compactors, as well as our value brand, SDLG

wheel loaders — all of which can be purchased without the need to go through the traditional solicitation process.” Members of NJPA and contract holders save time and cost in several ways. An NJPA contract eliminates the need by municipalities to duplicate individual solicitation and contracting processes as this has been completed and satisfied on behalf of NJPA members or agencies. The contract ensures the most competitive pricing available. Additionally, membership for government customers is free of charge. Cooperative purchasing contracts, sometimes known as buying contracts, are competitively solicited in response to requests for proposals. The contracts are in compliance with states’ statutes that allow municipalities to procure goods and services with other government entities without having to go through their own solicitation process. For more information, visit www.njpacoop.org. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Pages 37-43

Snow and Ice Section For more information on snow-clearing equipment and spreaders, visit CEG's Web site at www.constructionequipmentguide.com.

Meyer Products, Swenson Spreader Join ASH Group Meyer Products LLC and Swenson Spreader LLC, North American snow and ice management equipment producers, are joining the ASH Group out of Europe. The acquisition, which is expected to be finalized by the end of September, was announced by Andrew Outcalt, president of the Louis Berkman Work Products Company, which currently owns Meyer Products (based in Cleveland) and Swenson Spreader (based in Lindenwood, Ill.). The ASH Group is the parent company of European brands Schmidt and Aebi, globally offering a comprehensive and technologically advanced range of products for winter and summer maintenance focused primarily on the municipal, industrial, airport and railway sectors. Schmidt is a familiar name in the snow and ice man-

agement industry, manufacturing an array of advanced plows, spreaders and related products. Aebi manufactures heavy-duty equipment for agricultural applications. “We had been looking for a strategic partner with the necessary resources and expertise to help take our companies to the next level,” said Outcalt. “We believe the ASH Group provides us the best opportunity for growth because of its applicable experience in a number of our target markets and its track record for high quality technology advancements.” For the ASH Group, the acquisition provides a means to quickly and effectively achieve a significant footprint in the important North American snow and ice management market. Meyer is a

well-recognized brand in the lightand medium-duty truck segments of the snow and ice management business, manufacturing snowplows and spreaders used by snow removal contractors and property managers. Swenson has strong distribution in the heavy-duty truck segment of the market with a product portfolio that includes highperformance spreaders, dump bodies and all-purpose bodies, mounted on larger trucks, many of which are used by state and municipal governments. “The synergies of the existing product lines of Meyer and Swenson, together with the innovative product solutions of the ASH Group, will strengthen the position of our new subsidiary in the North American market,” said Walter T. Vogel, chairman of ASH Group. (Meyer and Swenson will

together form the ASH North American subsidiary of the ASH Group.) According to Outcalt, while the acquisition will provide Meyer and Swenson with full access to the global resources of the ASH Group, it will not impact day-today operations of either company. “It’s basically business as usual, but better,” said Outcalt. “Our brands will continue, our management is staying in place, our North American distribution channels and agreements will remain unchanged, and all our facilities will remain in place. In fact, we expect the creation of new jobs and expanded facilities in the future. We believe this will be a seamless transition for our customers, the end users of our products, as well as our employees and local communities. This was another reason

for choosing the ASH Group, because their management team shares our commitment to the overall customer experience, a family-oriented work environment and support for the communities in which we live and work.” Terms of the deal were not disclosed. For more information on the ASH Group, visit www.aebischmidt.com/en/ corporate-ashgroup. For more information on Meyer Products, visit meyerproducts.com. For more information on Swenson Spreader, visit swensonproducts.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Fisher Approves Snowplows for Boss Snowplow Launches HTX Use on 2015 Ford F-150 Truck Straight-Blade Plow Series Fisher Engineering, manufacturer of Fisher brand snow removal and ice control equipment, announced that its 7 ft. 6 in. (2.3 m) HT Series snowplow and 7 ft. 4 in. (2.2 m) Homesteader snowplow are now officially approved applications for the 2015 Ford F150 truck. “We’re proud to give our customers the flexibility of using Fisher snowplows on a wide variety of vehicles, especially the highly demanded 2015 Ford F-150,” said Andrew McArdle, CSP, senior product manager at Fisher Engineering. “Both professional and personal snowplow operators that drive 2015 Ford F-150 trucks now have the reassurance that Fisher tested and approved the use of the Homesteader and HT Series snowplows on their specific truck.”

Designed for durability and reliability, Boss Snowplow introduces a new series of HTX straight-blade plows for half-ton and light-duty trucks, SUVs and Jeeps. Available in mild steel, super slick poly or stainless steel finishes, the HTX straight-blade plows come in 7 ft. or 7 ft. 6 in. (2 or 2.3 m) widths. Built-in mounting locations for plow shoes and snow deflectors make rigging for options easier and quicker. Standard features include Boss’ SmartTouch2 control system and a high-performance, fully enclosed hydraulic system. For more information, call 800/286-4155 or visit www.bossplow.com.

Page 38 • September 26, 2015 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

Clear the Way With Ease Using Doosan’s Snow Attachments Doosan 14 to 22 ton (13 to 20 t) weight class wheel loaders and tool carriers can quickly clear snow when paired with bucket-mounted snow pusher attachments. A 12-ft. (3.6 m) wide attachment weighs 2,200 lbs. (998 kg) and the 14-ft. (4.2 m) wide version weighs 2,400 lbs. (1,088 kg), offering snow removal contractors and municipalities an alternative to buckets and traditional plowing when cleaning parking lots and roadways. Additional Features • 47-in. (119 cm) moldboard enables high-capacity snow removal • 1.5-in. (3.8 cm) rubber cutting edge protects surfaces • High-grade steel skid shoes • 12-in. (30.5 cm) push beam • Three bucket mount support tubes to help keep the snow pusher rigid Approved Models Both snow pushers are approved for use on the following Doosan wheel loaders: • DL200-3 • DL200TC-3 (tool carrier) • DL220-3 • DL250-3 • DL250TC-3 (tool carrier) • DL300-3 For more information, visit doosanequipment.com. A 12-ft. (3.6 m) wide attachment weighs 2,200 lbs. (998 kg) and the 14-ft. (4.2 m) wide version weighs 2,400 lbs. (1,088 kg), offering snow removal contractors and municipalities an alternative to buckets and traditional plowing when cleaning parking lots and roadways.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Crysteel Presents Stainless Moving Snow With Hiniker Steel Tailgate Spreader Crysteel Manufacturing’s stainless steel tailgate spreader is designed to effectively spread deicing materials while meeting the highest demands for efficiency and dependability all winter long. Corrosion resistant stainless steel delivers durability in the toughest environments, and a fully tapered trough eliminates all flat surfaces, preventing material hang ups, according to the manufacturer. Available with a 6- or 9-in. (15 or 23 cm) auger, the tailgate spreader also features a full opening bottom trough hinged on the body side for easy accessibility and clean out. The direct drive design minimizes maintenance and allows independent control of the auger and spinner. The Crysteel stainless steel tailgate spreader is backed by a 2-year warranty. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) Available with a 6- or 9-in. (15 or 23 cm) auger, the tailgate spreader also features a full opening bottom trough hinged on the body side for easy accessibility and clean out.

Hiniker Company offers a complete line of snowplows and material spreaders designed for the professional snow removal market. Products such as the Hiniker Scoop plow, the Hiniker C-Plow, and the new Hiniker Torsion-Trip V-Plow enable professional contractors to move snow more efficiently, resulting in faster job completion and greater profitability, according to the manufacturer. The Hiniker line of high-performance tripedge plows includes C-Plows, Scoop plows, VF series flare-wing trip-edge V-plows and straight blade plows. These plows feature a two- or three- section trip-edge with a 9-in. (23 cm) high, no-pinch pivot

The Hiniker line of high-performance trip-edge plows includes C-Plows, Scoop plows, VF series flare-wing tripedge V-plows and straight blade plows.

point, allowing the plow to clear obstacles such as curbs and parking barriers. Each section trips independently, reducing stress and twisting forces over the length of the plow. The no-pinch hinge keeps stones and ice from jamming the trip-edge. All Hiniker plows feature the Hiniker Quick-Hitch or Quick-Hitch2 system. Hiniker’s dual-motor electric salt and sand spreaders allow users to tailor material application rates accurately and conveniently. Powered by the truck’s 12-volt electrical system, the Hiniker control console provides individual variable speed control for both the conveyor and the spinner. The two electric motors offer quiet operation for residential and office applications. Two stainless steel electric spreader models with conveyor delivery are available: the 6.5ft. (2 m) model 635 and the 8-ft. (2.4 m) model 835. The model 775 electric auger spreader is optimally sized for use in either a 6.5-ft. or 8-ft. pickup bed. Standard hopper capacities are 1.50 cu. yd. (1.1 cu m) for model 635, 1.80 cu. yd. (1.3 cu m) for model 835 and 2.00 cu. yd. (1.5 cu m) for model 775. For more information, call 507/625-6621 or visit www.hiniker.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • September 26, 2015 • Page 39

Page 40 • September 26, 2015 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

Crysteel Truck Equipment 52248 Ember Rd. Lake Crystal, MN 56055 507-726-6041 800-722-0588 Fax: 507-726-2984 1130 73rd Ave. N.E. Fridley, MN 55432 763-571-1902 800-795-1280 www.crysteeltruck.com

Cannon Truck Equipment 51761 Danview Technology Court Shelby Twp., MI 48315 586-991-0054 Fax: 586-991-0074 www.cannonequip.com

Bert’s Truck Equipment 3804 US-75 Moorhead, MN 56560 800-232-3787 www.bertsonline.com

Bert’s Truck Equipment 2506 Bus. Hwy. 2 East Grand Forks, MN 56721 218-773-1194 Fax: 218-773-1840 Toll Free: 800-325-2412 www.bertstruck.com

Construction Equipment Guide â&#x20AC;˘ Snow & Ice Section â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ September 26, 2015 â&#x20AC;˘ Page 41

Stop in and see our complete line of John Deere E-Series Skid Steers, and 204K, 304K, and 244J Compact Loaders. Each comes standard with quiet heated cabs that keep winter on the outside while delivering vir tually unobstructed visibilit y from the inside. And all can be equipped with our Worksite Proâ&#x201E;˘ buckets, angle brooms, and snow pushers, blades, and blowers. Best of all, we provide a wealth of resources to NHHS \RX UXQQLQJ DW SHDN HI Ć&#x;FLHQF\ IRU \HDUV WR FRPH Ĺ LQFOXGLQJ GHSHQGDEOH SDU WV VXSSRU W IDFWRU \ WUDLQHG WHFKQLFLDQV DQG FXVWRPL]HG Ć&#x;QDQFLDO VHU YLFHV $VN IRU D GHPR WRGD\

www.erbequipment.com Fenton, MO 63026 Mt. Vernon, IL 62864 636/349-0200 618/244-6800 Cape Girardeau, MO Paducah, KY 63703 270/554-1131 573/334-0563 Owensboro, KY Foristell, MO 63348 270/684-2339 636/673-2131 Evansville, IN Cuba, MO 65453 812/473-0484 573/885-0500

www.lec1.com Ashland, KY Beaver, WV 606/928-3477 304/255-1525 Pikeville, KY Elkins, WV 606/432-0321 304/636-6421 Marietta, OH Cross Lane, WV 740/373-5255 304/204-1818 Cowen, WV 304/226-3299

www.westsidetractorsales.com 1400 W. Ogden Ave Wauconda, IL Naperville, IL 60563 847/526-7700 630/355-7150 Rockford, IL Fax: 630/355-7173 815/961-3160 South Holland, IL South Bend, IN 708/331-6362 574/232-1461 Rockdale, IL Lafayette, IN 815/730-9011 765/447-6933

Page 42 • September 26, 2015 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • September 26, 2015 • Page 43

PROFITABILITY

n e v i r D

TRUCK UTILITIES 2370 English St., St. Paul, MN 55109 651-484-3305 800-869-1075

TRIP-EDGE

C-PLOWS

Torsion-Trip V-Plow TRIP-EDGE

TOPPERS PLUS 1929 East Madison Ave. Mankato, MN 56001 507-387-7376 800-321-7587 www.toppersplus.com

2770 5th Ave S., Fargo, ND 58103 701-241-9411 800-972-9250 www.truckutilities.com

No matter what the conditions, Hiniker professional grade snowplows are ready to help you reach new levels of productivity and performance!

SCOOP PLOWS

V-PLOWS: Trip-edge designs give smooth operation and effective protection. Double acting cylinders provide positive moldboard position control.

FULL-TRIP

CONVENTIONAL PLOWS

C-PLOWS: Get the heavy-duty performance of the Hiniker trip-edge conventional plow plus the added versatility of a high performance backdrag plow. An amazing time-saver in driveways, parking lots and loading docks. SCOOP PLOWS: High capacity concave shape captures snow to efficiently clear large lots and parking areas. Angles left or right for conventional plowing. CONVENTIONAL PLOWS: 30 inch tall high-curvature blades roll deep snow off quickly and efficiently. Commercial plowers will appreciate the extra strength and efficient design.

TRIP-EDGE

CONVENTIONAL PLOWS

NORTH CENTRAL TRUCK & EQUIPMENT 2629 Clearwater Road St. Cloud, MN 56301 732 30th Avenue SE Minneapolis, MN 55414 877-485-9595 www.northcentralinc.com

SPREADERS: Spread ice control materials quickly and easily with an efficient Hiniker Spreader. Long-lasting stainless steel construction. Choose between OHV gas engine or dual-motor electric hopper spreaders, or new stainless steel tailgate spreader models! TAILGATE SPREADERS

HINIKER COMPANY 1-800-433-5620 s www.hiniker.com

TRUCKIN’ AMERICA 4720 Hwy. 52 N. Rochester, MN 55901 800-556-4720 507-285-9855 www.truckinamerica.com

Page 44 â&#x20AC;˘ September 26, 2015 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION MACHINERY COMPANY www.cmcky.com 2911 S. English Station Rd. Louisville, KY 40299 502-267-4020 866-901-2262 Fax: 502-261-9251 2235 Ragu Drive Owensboro, KY 42303 270-683-2000 877-683-2262 Fax: 270-683-3727 267 W. Jay Louden Rd. Carrollton, KY 41008 502-732-4661

Link-BeltÂŽ Spin AceÂŽ ([FDYDWRUV DUH SDFNHG ZLWK DOO WKH SRZHU SURGXFWLYLW\ DQG IXHO HIÂżFLHQF\ \RXÂśYH come to expect from us - along with a minimum swing radius design for better maneuverability at sites where work space is at a premium. Thoughtful redesign of counterweights and boom placement makes them ideal for residential construction, utility work and specialty trenching jobs. Â&#x2021; Roomy, redesigned cab Model # Operating Wt. Â&#x2021; +LJK GHÂżQLWLRQ IXOO FRORU 75 X3 Spin Ace 17,400 lbs. Ć&#x17D; /(' PRQLWRU 80 X3 Spin Ace OEV Â&#x2021; Convenient ground-level 145 X3 Spin Ace 33,200 lbs. VHUYLFH DQG Ă&#x20AC;XLG FKHFNV 235 X3 Spin Ace OEV Â&#x2021; Extended service intervals Â&#x2021; 7LHU $ FHUWLÂżHG ,VX]X HQJLQHV Â&#x2021; 3-year subscription to RemoteCAREâ&#x201E;˘ telematics

Net hp @ rpm

Tail Swing

54 hp @ 2,000 rpm 54 hp @ 2,000 rpm 100 hp @ 2,000 rpm KS # USP

Ć? Ć&#x17D; Ć? Ć&#x17D; Ć? Ć&#x17D; Ć? Ć&#x17D;

$OO WKLV ZLWK WKH LQGXVWU\ÂśV EHVW VWDQGDUG ZDUUDQW\ Your Link-Belt Excavator dealer has the right Spin Ace for your application, along with uncompromising service and support to keep them performing at their best. *75 X3 and 80 X3 engines are Final Tier 4

HAYDEN-MURPHY EQUIPMENT COMPANY www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 800-352-2757 Fax: 952-884-2293

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 45

ILLINOIS

KENTUCKY

Diamond Equipment 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 618-242-2273 800-388-6396 Fax: 618-242-9161 www.diamondequipment.com

Diamond Equipment 1046 Lovers Lane Bowling Green, KY 42103 270-781-1061 800-489-1061 Fax: 270-781-0907

Martin Implement Sales, Inc. 18405 115th Avenue Orland Park, IL 60467 708-349-8430 Fax: 708-349-4230

Team Boone 150 Schuler Dr. Bardstown, KY 40004 502-348-7573 Fax: 502-348-4401 www.teamboone.net

420 Nolen Drive South Elgin, IL 60177 630-883-3320 Fax: 847-695-9105 26354 N US Highway 12 Wauconda, IL 60084 847-469-0120 Fax: 847-526-8054 www.martinimplement.com

INDIANA Diamond Equipment 1060 Diamond Ave. Evansville, IN 47711 812-425-4428 dmfortune @diamondequipment.com www.diamondequipment.com 2000 Harlan Drive Terry Haute, IN 47802 812-299-4747 888-343-4747 Fax: 812-299-3687

Rueter’s www.rueterco.com 1132 31st Ave. Council Bluffs, IA 51401 712-366-5221 Fax: 712-366-5228

Southeastern Equipment Co., Inc. 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260-483-8868

5815 Lincoln Way Ames, IA 50014 515-268-0939 Fax: 515-268-0943

4951 West 96th Street Indianapolis, IN 46268 317-872-4877 www.southeasternequip.com

KANSAS

IOWA

Hardings Heavy Equipment 109 W. Commercial Ave. Lowell, IN 46356 219-696-8911 www.hardingsinc.com info@hardingsinc.com

MICHIGAN

MISSOURI

Hwy 30 West Grand Junction, IA 50107 515-738-2571 Fax: 515-738-2343

The Victor L. Phillips Co. www.vlpco.com 3250 N. Hydraulic St. Witchita, KS 67219 316-838-3347

Midland Engine 622 Jefferson Ave. Midland, MI 48640 989-631-4608 www.midlandengine.com

The Victor L. Phillips Co. www.vlpco.com 4100 Gardner Ave. Kansas City, MO 64120 816-241-9290

Hwy 30 East Carroll, IA 51401 712-792-9294 Fax: 712-792-6808

1305 SW 42nd St. Topeka, KS 66609 785-267-4345

Buck & Knobby Equipment Co., Inc. 6220 Sterns Rd. Ottawa Lake, MI 49267 MI: 734-856-2811 OH: 419-476-5293 Fax: 734-856-2709 www.buckandknobby.com

5430 Missouri 43 Joplin, MO 64804 417-781-8222

2425 NE 126th Ave. Elkhart, IA 50073 515-367-3054

2203 Jones Ave. Garden City, KS 67846 620-275-1996

6330 W. Highway 60 Brookline Station, MO 65619 417-887-2729

NEBRASKA

Rueter’s www.rueterco.com E. Hwy 275 Neligh, NE 68756 402-917-5604 Fax: 402-887-5638

Page 46 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

EXPERIENCE EX PERIENCE T THE HE D DIFFERENCE IFFERENCE Takeuchi offers Takeuchi offers the the m most ost iinnovative nnovative a and nd a advanced dvanced li line ne o off c compact ompac t e equipment q u i p m e nt o on n tthe he p planet. lanet. C Come ome a and nd ssee ee w what hat e everyone veryone e else lse iiss ttalking alking a about. bout. E Experience xperience T Ta Takeuchi akeuchi — Visit V isit your your local local dealer dealer today. today.

McCann Industries

Alta Equipment Company

543 S. Rohlwing Rd • Addison, IL 60101 630-627-0000 250 E. North Frontage Rd. • Bolingbrook, IL 60440 630-739-7770 2350 S. Laflin St. • Chicago, IL 60608 312-942-9200 4701 West 137th Street • Crestwood, IL 60445 708-597-3110 1133 Indianapolis Blvd. • Schererville, IN 46375 219-865-6545 1360 N. Rand Rd. • Wauconda, IL 60084 847-526-9444 4102 W. Crystal Lake Rd. • McHenry, IL 60050 815-385-0420 www.McCannOnline.com

28775 Beck Rd. • Wixom, MI 48393 248-449-6700 2470 W. Columbia Ave. • Battle Creek, MI 49015 269-965-1269 8840 Byron Commerce SW • Byron Center, MI 49315 616-878-7450 4716 Talon Ct. S.E. • Kentwood, MI 49512 616-698-2960 6327 Jomar Ct. • Lansing, MI 48917 517-272-5033 5920 Grand Haven Rd. • Muskegon, MI 49441 231-798-8754 56195 Pontiac Trail • New Hudson, MI 48165 248-356-5200 28855 Smith Rd. • Romulus, MI 48174 734-641-8238 1524 Champagne Dr. • Saginaw, MI 48604 989-752-9400 7500 E. 15 Mile Rd. • Sterling Hts., MI 48312 586-977-6000 476 US 31 South • Traverse, MI 49685 231-943-3700 9433 Riley St. • Zeeland, MI 49464 616-748-4108 www.altaequipment.com

Brandeis Machinery & Supply Company 17000 Highway 41 N Evansville, IN 47725 812-425-4491 7310 Venture Lane Fort Wayne, IN 46818 260-489-4551 8410 Zionsville Road Indianapolis, IN 46268-1524 317-872-8410 1801 Watterson Trail Louisville, KY 40299 502-491-4000 www.brandeismachinery.com

Star Equipment Ltd. 1401 2nd Avenue • Des Moines, IA 50314 515-283-2215 • 800-369-2215 Fax 515-283-0295 2625 W. Airline Hwy. • Waterloo, IA 50703 319-236-6830 • 800-791-9249 Fax 319-236-6834 2950 6th Street SW • Cedar Rapids, IA 52404 319-365-5139 • 800-728-5139 Fax 319-365-6726 2100 E. Lincoln Way • Ames, IA 50010 515-233-9500 • 866-856-2312 Fax: 515-233-9505 www.starequip.com

Victor L. Phillips Co. 4100 Gardner Ave. • Kansas City, MO 64120 800-878-9290 5430 S. Highway 43 • Joplin, MO 64804 800-878-8223 6330 W. Hwy 60 • Brookline Station, MO 65619 800-955-2729 3250 North Hydraulic • Wichita, KS 67219 800-878-3346 1304 SW 42 St. • Topeka, KS 66609 800-878-4345 2203 West Jones Ave. • Garden City, KS 67846 800-511-1435 www.vlpco.com

Columbus Equipment Company 50 East Kingston Ave. • Columbus, OH 43207 614-443-6541 12500 Williams Rd. • Perrysburg, OH 43551 419-872-7101 712 Shepherd Ave. • Cincinnati, OH 45215 513-771-3922 3942 Brecksville Rd. • Richfield, OH 44286 330-659-6681 290 Old Steubenville Pike • Cadiz, OH 43907 740-942-8871 7570 New Carlisle Pike • Dayton, OH 45424 937-879-3154 1601 Shepler-Church Ave. SW • Canton, OH 44706 330-453-4521 818 Lee St. • Zanesville, OH 43701 740-455-4036 864 Richmond Rd. • Painesville, OH 44077 440-352-0452 3668 US Route 23 South • Piketon, OH 45661 740-289-3757 www.columbusequipment.com

Midwest Underground Supply Road Builders Machinery and Supply Co., Inc. 4115 S. 90th St. • Omaha, NE 68127 402-331-9200 Fax: 402-339-6620 5601 Fletcher Ave. • Lincoln, NE 68507 402-325-0447 Fax: 402-325-0753 4949 Juergen Rd. • Grand Island, NE 68801 308-384-2620 Fax: 308-384-0686 www.roadbuildersmachinery.com

1106 32nd St. SW Bondurant, IA 50035 877-967-5656 27285 Ironworks Ave. Harrisburg, SD 57032 605-368-9880 www.midwestundergroundsupply.com

Diamond Equipment Inc. 1060 Diamond Avenue • Evansville, IN 47711 800-258-4428 • 812-425-4428 • Fax: 812-421-1036 1046 Lovers Lane • Bowling Green, KY 42103 800-489-1061 • 270-781-1061 • Fax: 270-781-0907 17035 North IL Hwy 37 • Mt. Vernon, IL 62864 800-388-6396 • 618-242-2273 • Fax: 618-242-9161 2000 Harlan Road • Terre Haute, IN 47802 888-343-4747 • 812-299-4747 • Fax: 812-299-3687 www.diamondequipment.com

FIND F IND O OUT UT W WHAT H AT O OTHERS TH ERS K KNOW. N OW. V VISIT I S IT T TAKEUCHI-US.COM AKEUCHI - US .COM TO TO FIND F I N D THE T H E DEALER D E A L E R NEAREST N E A R E S T YOU. YO U .

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 47

Bobcat of St. Louis

Luby Equipment Services

Wilson Equipment Company

2300 Cassens Drive • Fenton, MO 63026 636-343-9970

2180 Old Frankfort Pike • Lexington, KY 40510 859-254-6443 800-432-0913 Fax: 859-254-9099

401 West Outer Rd. Valley Park, MO 63088 636-225-2900 Fax: 636-225-4344

199 Airport Road • Cape Girardeau, MO 63702 573-334-9937

1885 West Terra Lane • O’Fallon, MO 636-240-9020

8853 Petroff Drive • Caseyville, IL 62232 618-397-9971

1101 N. Lenway Dr. • Columbia, MO 573-886-9435

4375 Camp Butler Road Springfield, IL 62707 217-744-2233

828 W. Cumberland Gap Pkwy • Corbin, KY 40701 606-528-0700 800-274-9457 Fax: 606-528-2329

9801 West State Route 161 Fairview Heights, IL 618-397-1847

2625 North 24th St. • Quincy, IL 62305 217-222-5454

2124 Watergap Road • Prestonsburg, KY 41653 606-874-8036 • 800-955-9457 Fax: 606-874-0013

www.bobcatofstl.com

www.lubyequipment.com

www.wilsonequipment.com

FIND F IND O OUT UT W WHAT H AT O OTHERS TH ERS K KNOW. N OW. V VISIT I S IT T TAKEUCHI-US.COM AKEUCHI - US .COM TO TO FIND F I N D THE T H E DEALER D E A L E R NEAREST N E A R E S T YOU. YO U .

Page 48 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CASE AUTHORIZED DEALERS MICHIGAN

ILLINOIS Birkey’s Bloomington Galesburg Mattoon Urbana

We raised the bar on peace of mind.

(309) 827-0520 (309) 341-4360 (217) 235-3158 (217) 337-1781

Southeastern Equipment Holt (517) 694-0471 Novi (248) 349-9922

Diamond Equipment Mt. Vernon (618) 242-2273

MISSOURI

Luby Equipment Services Caseyville (618) 397-9971 Quincy (217) 222-5454 Springfield (217) 744-2233

Miller-Bradford & Risberg Rockford (815) 397-6200

INDIANA Diamond Equipment Evansville (812) 425-4428 Terre Haute (812) 299-4747

Victor L. Phillips Joplin (417) 781-8222 Kansas City (816) 241-9290

NEBRASKA

NORTH DAKOTA

RPM Machinery Fort Wayne (260) 747-1561 Indianapolis (317) 856-3000 Lafayette (765) 742-2080 South Bend (574) 271-0800

Titan Machinery Bismarck (701) 250-7925 Dickinson (701) 227-5309 Fargo (701) 237-3333 Grand Forks (701) 775-8111 Minot (701) 852-3188 Williston (701) 577-0024

Titan Machinery Center Point (319) 849-3889 Davenport (563) 386-0400 Des Moines (515) 974-5100 Sioux City (712) 239-4941

KANSAS

KENTUCKY Diamond Equipment Bowling Green (270) 781-1061 McKeel Equipment Murray (270) 753-3062 Paducah (270) 444-0110 Southeastern Equipment Burlington (859) 586-6133 State Equipment Ashland (606) 928-5644 Wilson Equipment Company Corbin (606) 528-0700 Elizabethtown (270) 360-8326 Lexington (859) 254-6443 Louisville (502) 589-9901 Prestonsburg (606) 874-8036 Wright Implement Company Liberty (606) 787-8331

*The free 36 months or 3000 hours, whichever comes first, includes the manufacturer’s base warranty period, plus an additional two years of manufacturer’s warranty. Offer valid June 1, 2015 through December 31, 2015 on the following new CASE skid steer loader and compact track loader models: SR130, SR150, SR160, SR175, SR200, SR210, SR220, SR240, SR250, SR270, SV185, SV250, SV280, SV300, TR270, TR310, TR320, TR340 and TV380. The precise protection afforded is subject to the terms, conditions and exclusions of the plan as issued. Programs may be changed or cancelled without notice. ©2015 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates.

Potter Equipment Springfield (417) 862-9275

McCann Industries Schererville (219) 865-6545

Victor L. Phillips Garden City (620) 275-1996 Topeka (785) 267-4345 Wichita (316) 838-3346

CaseCE.com/3YearWarranty

Luby Equipment Services Cape Girardeau (573) 334-9937 Fenton (636) 343-9970 O’Fallon (636) 332-9970

Hopf Equipment Huntingburg (812) 683-2763

Coleman Equipment Bonner Springs (913) 422-3040

FOR A LIMITED TIME...

Crown Power & Equipment Columbia (573) 443-4541 Eldon (573) 392-0230 Jefferson City (573) 636-5281

Titan Machinery Lincoln (402) 464-3711 North Platte (308) 532-6571 Omaha (402) 733-3700

IOWA

Get 3-yrs/3000-hrs of hassle-free, complete factory protection with every fuel-efficient, high-performance Alpha Series skid steer and compact track loader. That’s an additional 24 months at no additional cost to you. Don’t wait. Offer ends December 31st.

RPM Machinery Dorr (616) 371-7250

Burris Equipment Ingleside (815) 363-4100 Waukegan (847) 336-1205

McCann Industries Addison (630) 627-0000 Bolingbrook (630) 739-7770 McHenry (815) 385-0420 Wauconda (847) 526-9444

FACTORY WA R R A N T Y *

Miller-Bradford & Risberg Negaunee (906) 475-4181

MINNESOTA Titan Machinery Crookston (218) 281-4668 Hermantown (218) 727-3038 Marshall (507) 532-5783 Rogers (763) 428-5099 Shakopee (952) 445-5400

SOUTH DAKOTA Titan Machinery Aberdeen (605) 225-0505 Pierre (605) 224-9247 Rapid City (605) 388-0266 Sioux Falls (605) 336-3434

OHIO Southeastern Equipment Brilliant (740) 598-3400 Brunswick (330) 225-6511 Cambridge (740) 432-6303 Dublin (614) 889-1073 Gallipolis (740) 446-3910 Heath (740) 522-3500 Mansfield (419) 529-4848 Marietta (740) 374-7479 Mentor (440) 255-6300 Monroe (513) 539-9214 North Canton (330) 494-3950 Perrysburg (419) 874-0331

WISCONSIN Miller-Bradford & Risberg Abbotsford (715) 223-2381 De Pere (920) 338-5800 Eau Claire (715) 832-3443 Madison (608) 222-9191 Sussex (262) 246-5700 Service Motor Company Dale (920) 779-4311 Fond Du Lac (920) 923-1768 New Franken (920) 468-7700 Titan Machinery La Crosse (608) 788-1025

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 49

LOGAN CONTRACTORS SUPPLY, INC. www.logancontractors.com Des Moines 4101 106th Street • Des Moines, Iowa 50322 515-253-9048 • Fax: 515-253-9491 Quad Cities 4114 State Street • Bettendorf, Iowa 52772 563-441-2949 • Fax: 563-441-2953 Kansas City 1325 S. Enterprise Drive • Olathe, Kansas 66061 913-768-1551 • Fax: 913-768-1171 Omaha 6544 L Street • Omaha, Nebraska 68117 402-339-3900 • Fax: 402-597-0694

BURRIS EQUIPMENT 2216 N. Greenbay Rd. • Waukegan, IL 60087 847-336-1205 • Fax: 847-336-2697 www.burrisequipment.com Ingleside, IL 815-363-4100 Joliet, IL 815-464-6650

FRANKLIN EQUIPMENT, LLC www.franklinequipmentllc.com Columbus Superstore 4141 Hamilton Square Boulevard Groveport, OH 43125 614-228-2014 • 800-282-1438 Dublin 7570 Fishel Drive South • Dublin, OH 43016 614-389-2161 Newcomerstown 6206 US Hwy 36 SW • Newcomerstown, OH 43832 740-492-0455

INDY EQUIPMENT www.indyequipment.com 6500 Schaaf Rd. • Independence, OH 44131 216-446-3200 • Fax: 216-573-7712 11159 Royalton Rd. • North Royalton, OH 44133 440-237-9040 35350 Chester Rd. • Avon, OH 44011 440-832-7133

MUELLER IMPLEMENT, INC. www.muellerrental.com 4948 County Road Yz • Dodgeville, WI 53533 608-935-2751

BUCK & KNOBBY www.buckandknobby.com 6220 West Sterns Road • Ottawa Lake, MI 49267 Toll Free: 855-213-2825 • 734-856-2811

Page 50 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cat Inspect Mobile App Improves, Simplifies Machine Inspection Process

Caterpillar is taking the paper out of the machine inspection process with Cat Inspect, an easy-to-use mobile application that allows users to download machine-specific inspection forms and capture actionable information during their walkarounds. Inspection types include technical analysis (TA1) inspection forms and preventive maintenance (PM) checklists. The checklists are serialnumber specific, which gives users guidance specific to the Cat equipment they depend on every day. Users can add ratings, make comments and take pictures during the inspection. Subsequent inspection reports lists items requiring attention, from immediate to normal. If users are inspecting machines with optional equipment not listed on their checklists, they can document that equipment and add the information to the form. Besides eliminating the need for

paper, Cat Inspect allows typed or dictated notes, off-line inspections, forwarding to the Cat dealer, and PDF distribution. Important alerts are also sent to VisionLink, so users can get an even better overall view of their fleets. Cat dealers and technicians have tested, improved and used Cat Inspect over the past year, ensuring an outstanding experience for all customers, especially those using a mobile device on inspections for the first time. Cat Inspect is available at no charge for Android devices through Google Play, for Apple iPhones and iPads through the App Store on iTunes and for Windows 8.1 tablets through the Windows Store. For more information, visit www.cat.com/catinspect. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

WEST SIDE TRACTOR SALES CO. www.westside tractorsales.com 1400 W. Ogden Ave. • Napervile, IL 60563 630-355-7150 Fax: 630-355-7173 150 W. 162nd St. Route 6 • South Holland, IL 60473 708-331-6362 Fax: 708-331-7334 3110 Prairie Rd. • Rockford, IL 61102 815-961-3160 Fax: 815-965-1810 1560 N. Old Rand Rd. • Wauconda, IL 60084 847-526-7700 Fax: 847-526-3565 600 Walnut Court • Rockdale, IL 60436 815-730-9011 Fax: 815-730-9036

AIS CONSTRUCTION EQUIPMENT CORPORATION www.aisequip.com 3600 North Grand River Avenue • Lansing, MI 48906 517-321-8000 Fax: 517-321-6275 Grand Rapids 600 44th Street S.W. • Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 Northeast Detroit 65809 Gratiot Avenue • Lenox, MI 48050 586-727-7502 Fax: 586-727-7311

Terex Corp. Announces Sr. Leadership Changes Due to Departure of Tim Ford Terex Corporation announced the following senior executive changes: • Tim Ford, currently president, Terex Cranes, is leaving the company to pursue other opportunities. • With Ford’s departure, Ken Lousberg, currently president of Terex China, will take on the role of president of Terex Cranes as well as the responsibility for Latin America previously with Ford. While Lousberg will retain responsibility for China, a country leader for the Chinese business will be named as soon as possible to help coordinate business in China reporting to Lousberg. Lousberg joined Terex through the Genie acquisition in 2002 and has held several senior management positions at various Terex operations. • George Ellis will take on a new role as senior vice president, operations planning and president, Terex Construction. In addition to retaining his current responsibilities for Terex Construction, Government Programs and India, Ellis will assume global responsibility of the Terex Business System, sourcing, transportation, logistics, and manufacturing footprint. Ellis also joined Terex through the Genie acquisition in 2002 and has held several senior management positions at various Terex operations. • Scott Hensel, now vice president, Terex Services North America has been named to the newly created position of vice president and managing director, Terex Utilities and Services reporting to Lousberg. In this new role, in addition to his current responsibility for managing and growing the North American services business, Hensel also will have management responsibility for the Terex Utilities business.

Hensel was previously a partner at McKinsey & Company and joined Terex in 2014 to improve and grow the Terex Services North America business. • Kieran Hegarty, president, Terex Materials Processing, will assume management responsibility of the Terex Fuchs business which will become part of the Terex Materials Processing segment. Ron De Feo, Terex chairman and chief executive officer, said, “While we expect to achieve substantial synergies with the announced merger with Konecranes, as we think ahead and help position the company for the merger we must continue to organize the company and operate Terex in a way that is best for the business.” “We thank Tim Ford for his dedicated service and leadership within both the AWP segment and his current position with Terex Cranes, and wish him the best in his future endeavors,” said De Feo. “Ken Lousberg is the right person to lead our efforts to continue to improve our global cranes business. Ken has previously served in multiple leadership roles within our cranes business and will be in an excellent position to start immediately with the important work of growing our cranes business. Ken has demonstrated strong leadership skills during his tenure with Terex and I believe his increasing responsibilities will serve us and our customers well.” For more information, call 203/222-7170 or visit www.terex.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Saginaw 4600 AIS Drive P.O. Box 253 • Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 Traverse City 8300 M-72 East • Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 West Detroit 56555 Pontiac Trail • New Hudson, MI 48165 248-437-8121 800-457-8121

RDO EQUIPMENT CO. www.rdoequipment.com 12500 DuPont Ave. S. • Burnsville, MN 952-890-8880 1910 LorRay Dr. • North Mankato. MN 506-387-1836 1236 60th Ave. N.W. • Rochester, MN 507-282-8888 6700 Highway 10 NW • Sauk Rapids, MN 320-259-6222

hitachiconstruction.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 51

NORTRAX www.nortrax.com 310 Industrial Park Drive • Ashland, WI 54806 715-682-5522 Fax: 715-682-8476 4341 South PrairieView Rd. (Hwy 53 North) Chippewa Falls, WI 54729 715-834-2924 Fax: 715-834-1173 1890 US Hwy 8 • Monico, WI 54501 715-487-5583 Fax: 715-487-5968

IS IN OUR GENES.

1425 O’Keefe Drive • Mosinee, WI 54455 715-693-3820 Fax: 715-693-3825 259 Convenience Lane Southwest • Bemidji, MN 56601 215-759-1996 Fax: 218-759-1790 3401 Arrowhead Rd. • Duluth, MN 55811 218-722-7456 Fax: 218-722-2619 34316 Hwy 2 • Grand Rapids, MN 55744 218-326-9427 Fax: 218-327-1248 1818 North Lincoln Rd. • Escanaba, MI 49829 906-789-9054 Fax: 906-789-0344

BROOKS TRACTOR www.brookstractor.com Sun Prairie 1900 W. Main St. • P.O. Box 9 • Sun Prairie, WI 53590 608-837-5141 Fax: 608-837-4012 Milwaukee 12101 W. Silver Spring Dr. • Milwaukee, WI 53225 414-462-9790 Fax: 414-462-7242 De Pere 1031 Lawrence Dr. • De Pere, WI 54115 920-336-5711 Fax: 920-336-6405 West Salem 451 W. Avenue N. • West Salem, WI 54669 608-786-2644 Fax: 608-786-2206 Plover 5429 Prairie Dr. • Plover, WI 54467 715-254-2777 Fax: 715-254-2799 COMING 2016 Mount Pleasant 1609 SE Frontage Rd. • Mt. Pleasant, WI 53177

RUDD EQUIPMENT COMPANY 4344 Poplar Level Rd • Louisville, KY 40213 502-456-4050 6901 Highway 41 N • Evansville, IN 47725 812-867-6661 5820 Industrial Rd • Fort Wayne, IN 46825 260-482-3681 2655 Kentucky Ave • Indianapolis, IN 46221 317-247-9125

Did you know over one-third of all hydraulic mining excavators working worldwide are Hitachi? They’re built to dig through the world’s harshest environments. That same toughness is passed down to our focused family of construction excavators. So whether you are pulling down a 60-foot-high wall of traprock or laying a mile of pipe, you get the same proven durability to get the job done. That’s the Power of Focus.

728 W Cumberland Gap PKWY • Corbin, KY 40701 606-528-9440 2114 Highway 1428 E • Prestonsburg, KY 41653 606-874-2104 4679 Baumgartner Rd • St. Louis, MO 63129 314-487-8925 11807 Enterprise Drive • Cincinnati, OH 45241 513-321-7833 2512 Jackson Pike • Columbus, OH 43223 614-636-4050 COMING SOON Cleveland, OH 216-393-7833

HitachiConstruction.com

Page 52 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Authorized Bobc at Dealer s

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 53

Page 54 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Great Lakes Timber Professionals Hold 70th Annual Expo EXPO from page 18

Tom Bissell of Bissell Trucking checks out the Sennebogen 830E log loader.

Roland Machinery co-sponsored the Great Lakes Forwarder Challenge. Pictured are two Komatsu 855.1 forwarders.

Standing in front of the Cat MH 3037 material handler (L-R) are Jake Nurmi, Hord Logging; Brian Anderson, Louisiana Pacific; Tom Olsen Fabick CAT; and Keith Pirlot, Louisiana Pacific.

(L-R): Emily and Chris Charbonneau of Verso Paper Co. stop by the American State Equipment booth to see the Rotobec 185 log grapple attached to a Liebherr LH 50. Representing American State Equipment is John Oberthaler. Rotochopper displayed its B-66 horizontal grinder.

Lowe Manufacturing Inc. representatives Tom Jaster (L) and Gerry Glass work the Lowe booth.

(L-R): Shane Boettcher, Nortrax, shows the Waratah HTH 622B to Howard Carter and Jeremy Miller of Miller Timber Harvesting.

(L-R): Mark Wisinski, Swiderski Equipment Inc., shows the Doosan DL200 wheel loader to Dustin Hiler, Rob Manley and Cody Kowalczyk.

Page 56 • September 26, 2015 • www.constructionequipmentguide.com • Off-Road Trucks Section • Construction Equipment Guide

Caterpillar C Series Articulated Trucks Increase Potential

Rated payload capacities for the new models are 36, 42, and 45.2 tons (32.7, 38, and 41 t), respectively, with all models replacing their B Series predecessors.

The Cat 735C, 740C EJ and 745C articulated trucks build on the performance, reliability and durability of their B Series predecessors with significant new features. These include engines that meet U.S. EPA Tier IV Final/EU Stage IV emission standards, new transmissions with expanded electronic control, automatic traction control, automatic retarder control, hill assist and waiting brake systems, and an optional payload weighing system — all aimed at delivering lower costs per ton by reducing cycle times, saving fuel and easing the operator’s work load. Rated payload capacities for the new models are 36, 42, and 45.2 tons (32.7, 38, and 41 t), respectively, with all models replacing their B Series predecessors. The new 745C’s 1.7-ton (1.5 t) capacity increase (compared with the 740B’s capacity) combines with its faster cycle times for significant production gains. The new 740C EJ ejector model, which combines the 745C’s tractor with a horizontaldischarge body, provides added versatility and safety in certain operations. The 740C EJ can unload material to uniform depths

while traveling at speed, potentially reducing the need for onsite spreading equipment, and can discharge the load with added stability in soft underfoot conditions, on side slopes and grades, and in environments where overhead obstructions are present. New Power-Train Efficiency Engines in the new models meet Tier IV Final/Stage IV emission standards, but also are available in versions meeting applicable emission standards for lesser- and nonregulated areas. The 735C’s Cat C15 ACERT engine is rated at 452 hp (337 kW) and the C18 ACERT engine in the 740C EJ and 745C is rated at 511 hp (381 kW). Articulated trucks designed for sale in higher regulated territories are equipped with the Cat clean emissions module (CEM). This aftertreatment system includes a diesel particulate filter that can automatically regenerate (remove accumulated soot) without operator intervention or work cycle disruption. The fully integrated Cat CEM also includes a selective catalytic reduction system and diesel exhaust fluid (DEF) tank, with the DEF tank being easily accessed

from ground level. The new Cat CX38 high density power shift transmission used in the C Series trucks has nine forward speeds, two reverse speeds, and a number of electronic features that enhance overall performance and productivity. Electronic clutch pressure control, for example, modulates transmission-clutch engagement for smooth shifting and extended component life, and the advanced productivity electronic control strategy feature is aimed at optimizing gear selection in all operating situations for efficient performance and fuel economy. Shift torque management, combined with the improved shift control logic feature, maintains consistent torque flow though the transmission during gear-range changes, provides automatic shift selection tailored to machine operation, and automatically downshifts for acceleration. Part throttle shifting allows shifting at lower engine speeds, resulting in improved fuel efficiency, quieter operation and easier low-speed maneuvering. As the new C Series trucks, with permanent six-wheel drive, encounter changing terrain and

underfoot conditions, the automatic traction control feature adjusts the level of engagement for the clutch locks in the inter-axle differential and in the three axle differentials. The system makes these adjustments while the machine is moving and does not require operator intervention. The system maintains optimum traction for steady production, relieves the operator of manually engaging the system, saves fuel by proportionally applying the locks based on operating conditions, and does not hinder tight-maneuver steering. Retarding control for the C Series models can now be set to fully automatic, in addition to manual control. In automatic mode, the machine manages retarding through a combination of engine brake, gear selection, and servicebrake application without operator intervention. The automatic system is available for both forward and reverse operations, and the manual system provides two levels of engagement for more experienced operators. Other features that contribute to the overall efficiency and ease of operation include the hill assist system, which facilitates stopping and starting on grades, and the

waiting brake system, which temporarily applies the service brakes during pauses in the work cycle, whether waiting at the loading or dumping site or delays from site congestion. Cat Connect Technologies Cat Connect payload technologies for the 735C, 740C EJ, and 745C help customers optimize operations and improve overall jobsite efficiency. With Cat production measurement as an option, operators can measure and deliver accurate payloads with confidence to boost productivity, lower costs and prevent the potential for overload damage. When used with Cat Connect link technologies, payload data can be accessed through the online VisionLink user interface. With accurate, reliable, performance and productivity data, customers can make timely, factbased decisions about their fleet and effectively manage their job sites. For more information, visit www.cat.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide Рђб Off-Road Trucks Section Рђб www.constructionequipmentguide.com Рђб September 26, 2015 Рђб Page 57

SMALLER FRAME. BIG-TIME PRODUCTIVITY. Our 250D-II and 300D-II ADTs give you the competitive edge you need in a 25- or 30-ton truck. Boasting fast cycle times and excellent power-to-weight ratios, they move material at a low cost per ton. But what really sets these prime movers apart from other ADTs is their abilit y to sur vive, even thrive, on rough terrain, steep slopes, and mud. Limited-slip dif ferentials on the 300D Series-II and transfer case dif ferential lock provide a traction boost in poor underfoot conditions. 7R R NHHS PDWHULDOV DQG SURкЪWV каRZLQJ VHH XV WRGD\ DERXW D ' 6HULHV ,, $'7

www.westsidetractorsales.com Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989/777-0090 Fax: 989/777-1583 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616/538-2400 Fax: 616/538-0449 Northeast Detroit 65809 Gratiot Ave Lenox, MI 48050 586/727-7502 Fax: 586/727-7311

West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248/437-8121 1-800/457-8121 Traverse City 8300 M-72 East Williamsburg, MI 49690 231/267-5060 Fax: 231/267-5257

Naperville, IL 60563 B 630/355-7150 Fax: 630/355-7173 Rockdale, IL 60436 815/730-9011 1-800/937-3355 Fax: 815/730-9036 Rockford, IL 61102 815/961-3160 Fax: 815/965-1810 South Holland, IL 60473 708/331-6362 Fax: 708/331-7334 Wauconda, IL 60084 847/526-7700 Fax: 847/526-3565

Bloomington, EIN 47403 , 812/333-9677 Fax: 812/333-9731 Fort Wayne, IN 46808 260/482-8576 Fax: 260/483-4057 Indianapolis, IN 46219 317/544-3411 Fax: 317/544-3420 Lafayette, IN 47905 765/447-6933 Fax: 765/448-9038 South Bend, IN 46619 574/232-1461 Fax: 574/233-3324

www.nortrax.com Ashland, WI 715/682-5522 Chippewa Falls, WI 715/834-2924 Monico, WI 715/487-5583 Mosinee, WI 715/693-3820 Duluth, MN 218/722-7456 Bemidji, MN 218/759-1996 Grand Rapids, MN 218/326-9427 Escanaba, MI 906/789-9054

www.brookstractor.com Sun Prairie 1900 W. Main St. P.O. Box 9 Sun Prairie, WI 53590 608/837-5141 Fax: 608/837-4012 Milwaukee 12101 W. Silver Spring Dr. Milwaukee, WI 53225 414/462-9790 Fax: 414/462-7242 De Pere 1031 Lawrence Dr. De Pere, WI 54115 920/336-5711 Fax: 920/336-6405

www.meadetractor.com

West Salem 451 W. Avenue N. West Salem, WI 54669 608/786-2644 Fax: 608/786-2206

Bowling Green, KY 270/842-3400

Plover 5429 Prairie Dr. Plover, WI 54467 715-254-2777 Fax: 715/254-2799

Louisville, KY 502/253-3721

Coming 2016 Mount Pleasant 1609 SE Frontage Rd. Mt. Pleasant, WI 53177

London, KY 606/862-8447

Richmond, KY 859/623-2030 Chattanooga, TN 423/855-0633 Kingsport, TN 423/349-5001 Knoxville, TN 865/546-3207 Lavergne, TN (Nashville) 615/501-8600

Page 58 • September 26, 2015 • www.constructionequipmentguide.com • Off-Road Trucks Section • Construction Equipment Guide

see CHART page 62

Articulated/ Rigid

Mfg. Model

Drive Configuration

BELL B25E B30E B35D B40D B45D B50D

CATERPILLAR 770 770G 770G Tier IV 772 772G 772G Tier IV 773G 775G 777G 785D 789D 793F MT5300D AC 795F AC 797F

HITACHI EH1100-5 EH1700-3 EH3500AC-3 EH4000AC-3 EH5000AC-3

R R R R R R R R R R R R R R R

2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD

R R R R R

HYDREMA TRUCKS 912HM 912HM Water Tanker 912HM Flatbed 922HM 912ES Rail

A A A A A

JOHN DEERE 250D Series II 300D Series II 370E 410E 460E

A A A A A

TEREX TRUCKS TA400 TA250 TA300 TR100 TR45 TR60 TR70

41,365 (18,763) 42,365 (19,216) 62,236 (28,230) 65,808 (29,850) 72,708 (32,980) 76,104 (34,520)

6x6 6x6 6x6 6x6 6x6 6x6

A A A A A A

Articulated Articulated Articulated Rigid Rigid Rigid Rigid

Operating Weight Pounds (kgs)

RWD RWD RWD RWD RWD

4x4 4x4 4x4 6x6 4x4

6x6 6x6 6x6 6x6 6x6

6x6 6x6 6x6 4x2 4x2 4x2 4x2

134,912 (61,195) 157,000 (71,214) 157,000 (71,214) 158,044 (71,688) 181,000 (82,100) 181,000 (82,100) 251,416 (114,040) 274,705 (124,604) 401,955 (182,324) 550,000 (249,476) 700,000 (317,515) 851,000 (386,007) 1,150,000 (521,631) 1,257,000 (570,166) 1,375,000 (623,690) 240,194 (108,950) 360,008 (163,300) 709,888 (322,000) 846,575 (384,000) 1,102,310 (500,000)

19,224 (8,720) 18,210 (8,260) 18,000 (8,165) 35,540 (16,120) 22,050 (9,979) 40,340 (18,314) 42,990 (19,541) 67,862 (30,782) 70,224 (31,853) 71,024 (32,216)

152,978 (69,390) 106,393 (48,259) 115,038 (52,200) 347,710 (157,720) 171,870 (77,960) 210,940 (95,680) 248,440 (112,690)

Engine Type

Rated Payload Tons (Metric Tons) 26.45 (24) 30.86 (28) 35.8 (32.5) 40.8 (37) 45.0 (41) 50.0 (45.35)

Drive System Mech/Electr.

6 IT4i Mercedes Benz OM 926LA-6 IT4i LA926 OM z Ben des rce Me V6 IT4i Mercedes Benz OM501LA-V6 IT4i LA501 OM Mercedes Benz V8 IT4i Mercedes Benz OM502LA-V8 IT4i LA502 OM z Ben des rce Me

36 (32.7) 40 (36.3) 40 (36.3) 46 (41.7) 50 (45.4) 50 (45.4) 55.3 (50.1) 64 (58.1) 95.2 (86.4) 136 (123.4) 181 (164.2) 227 (205.9) 290 (263.1) 318 (288.5) 363 (329.3) 77 (69.85) 115.39 (104.7) 200 (181) 243 (221) 352 (319)

11 (10) 11 (10) 11 (10) 22 (20) 11 (10)

25.5 (23.2) 30.1 (27.3) 37.1 (33.7) 41.1 (37.3) 46.1 (41.8)

41.9 (38) 27.5 (25) 30.9 (28) 100 (91) 45 (41) 60 (55) 72 (65)

NEQUIPMENTGUIDE.COM VISIT WWW.CONSTRUCTIO TRUCK LISTINGS. FOR COMPLETE OFF ROAD

Cat C15 ACERT Cat C15 ACERT Cat C15 ACERT Cat C18 ACERT Cat C18 ACERT Cat C18 ACERT Cat C27 ACERT Cat C27 ACERT Cat C32 ACERT Cat 3512C HD Cat 3516C HD Cat C175-16 Cat C175-16 Cat C175-16 Cat C175-20

M M M M M M Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto AC Elec AC Elec Auto

Cummins QSK23 Cummins QST30 Cummins QSKTA50-CE Cummins QSKTA60-CE Cummins QSKTTA60-CE

M M E E E

IVi Turbo Diesel M Cummins QSB 4.5 EPA Tier IVi Turbo Diesel M Tier EPA 4.5 Cummins QSB IVi Turbo Diesel M Cummins QSB 4.5 EPA Tier IVi Turbo Diesel M Cummins QSB, 6.7 EPA TierIVi Turbo Diesel M Cummins QSB 4.5 EPA Tier s 6090 IT4 engine John Deere PowerTech Plus 6090 IT4 engine Plu ech erT John Deere Pow 5 FT4 engine John Deere PowerTech 6135 FT4 engine 613 ech erT Pow ere De n Joh 5 FT4 engine John Deere PowerTech 613 Scania DC13 Scania DC9 Scania DC9 00TA DDEC Detroit Diesel MTU 16V-20 25 -C5 K19 QS ins Cumm Cummins QSK19-C650 sel MTU 12V-2000TA DDEC Die t troi De

M M M M M

M M M M M M M

Construction Equipment Guide • Off-Road Trucks Section • www.constructionequipmentguide.com • September 26, 2015 • Page 59

Contact your local dealer:

Battle Creek, MI 269.965.1269 Byron Center, MI 616.878.7450 Kentwood, MI 616.698.2960 Lansing, MI 517.272.5033 Muskegon, MI 231.798.8754 New Hudson, MI 248.356.5200 Romulus, MI C 734.641.8238 Saginaw, MI 989.752.9400 Sterling Hts, MI 586.977.6000 Traverse, MI 231.943.3700 Wixom, MI 248.449.6700 Wixom, MI (Cons. Division) 248.356.5200 1 Zeeland, MI 616.748.4108

Burnsville, MN 800.552.1189 Proctor, MN 800.835.MACK Eau Claire, WI 800.494.MACK Mankato, MN 800.862.MACK Rochester, MN 800.562.1505 Roseville, MN 800.704.0935 Sauk Rapids, MN 888.310.MACK

Evansville, IN 812.867.6661 Fort Wayne, IN 260.482.3681 Indianapolis, IN 317.247.9125 Corbin, KY 606.528.9440 Louisville, KY 502.456.4050 Prestonsburg, KY 606.874.2104 McCALLISTER EQUIPMENT CO. St. Louis, MO 314.487.8925 Alsip, IL 708.389.7700 East Peoria, IL 309.694.4455 Rockford, IL T Butler, WI 815.227.0555 262.781.3770 Springfield, IL DeForest, WI 217.789.0351 608.846.9600 Villa Park, IL DePere, WI 630.530.7600 920.336.3601 Eau Claire, WI 715.835.6133

Some companies have you choose power or fuel efficiency. You chose both.

Only Volv Volv o o delivers on a true fuel efficiency guarantee so you never haavve to compromise on performance or productivity. And with CareT Track machine monitoring, you can focus usiness. T Talk alk to us today, your attention on more important things — like growing your business. or get the details at volvoce.com/smartfuel.

A L

Page 60 • September 26, 2015 • www.constructionequipmentguide.com • Off-Road Trucks Section • Construction Equipment Guide

John Deere E-Series Articulated Dump Trucks Feature a Load of New Updates Bolstered with big updates, the new 370E, 410E and 460E articulated dump truck (ADTs) are designed to keep materials moving and profits flowing. The three models are highlighted by an EPA Final Tier IV (FT4)/EU Stage IV John Deere PowerTech diesel engine and a pressurized Deere-designed cab — both of which combine to boost productivity and uptime, while minimizing daily operating costs. “The new E-Series articulated dump trucks are the result of our most important asset, our customers,” said Mark Shea, ADT product consultant, John Deere Construction & Forestry. “We worked with our customers to find out what they need in an articulated dump truck to make their jobs more safe, efficient and productive. The E-Series is equipped with several features to accommodate these requests. Efficiency and productivity are boosted by standard best-in-class diff lock and powerful transmission retarder; while safety is paramount through groundlevel daily service, auto horn, rollover protection and remote park-brake release.” Designed and built in Dubuque and Davenport, Iowa, the E-Series ADTs feature 422 hp (370E), 443 hp (410E) and 481 hp (460E), delivering impressive power and torque with exceptional power-to-weight ratios and fast cycles. A purpose-built ZF transmission includes eight forward gears and four reverse gears, and a high-capacity retarder to increase service brake life. In addition, the John Deere hauler axles are designed for heavy-duty applications and include on-the-fly differential locks and outboard planetaries, and each axle is independently pressure lubed and filtered. The E-Series axles use internal wet disc brakes that utilize independent cooling circuits. Perhaps the biggest change to these new models is the updated cab. The ultra quiet, redesigned cab is sealed and pressurized to keep out dust and noise, affording enhanced operator concentration and efficiency. Creature comforts include push-button start, low-effort push-button controls, air-suspension heated high-back seat, tilt/telescoping steering wheel and optional premium radio with Bluetooth, auxiliary input and satellite radio capability. Stairway lights can be turned on with the push of

CONTINENTAL EQUIPMENT CORP. A division of AIS www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000 517/321-4191 Fax

BRANDEIS MACHINERY & SUPPLY COMPANY The 370E, 410E and 460E articulated dump truck (ADTs) are highlighted by an EPA Final Tier IV (FT4)/EU Stage IV John Deere PowerTech diesel engine and a pressurized Deere-designed cab.

a button from ground level for easier visibility when entering the larger cab entryway. The E-Series models are equipped with an updated 7-in. high-resolution LCD monitor for easy access to onboard diagnostics, digital gauges and vital system indicators — all conveniently located within arm’s reach and view during rough haul conditions. Two ergonomically positioned sealed switch modules simplify operation and convenience controls. The auto shutdown feature turns off the engine after an owner-determined period of inactivity to reduce emissions, idle time and subsequent wear on the power train. An integrated tire-pressure/temperature monitoring system comes standard to help maximize tire life and fuel efficiency. If pressure drops by 10 percent, a passive alarm appears on the monitor. In addition, further pressure decreases or overheating result in an audible warning and an email alert that is sent via JDLink. An optional, onboard weighing system is factory calibrated, which allows contractors to view the weight and the number of loads carried via JDLink. The system displays the payload on the monitor during loading while transmitting real-time load and tonnage data via JDLink, so productivity can be monitored from virtually anywhere. The onboard weighing option also comes equipped with mirror-mounted LED

load indicator lights that illuminate for the loading operator as the truck approaches capacity (green flashing), is at capacity (green) or is 10 percent or more over capacity/overload (red flashing). A favored customer-driven feature of the E-Series and a hallmark for John Deere is centralized, true ground-level servicing to simplify daily maintenance and overall serviceability. All daily service can be completed from the ground. Hydraulically controlled fans with swing-out cooling packages on both sides of the engine highlight the cool-on-demand system. For dusty environments, there is a reversible fan option available for simplified cooler cleanout. Operators looking to get the most out of their E-Series can rely on Ultimate Uptime featuring John Deere WorkSight. With Ultimate Uptime, operators receive predelivery and follow-up inspections; three years of JDLink telematics, machine health prognostics and remote diagnostics and programming capability; and the ability to add additional dealer-provided uptime solutions to customize the package to individual needs. For more information, visit www.JohnDeere.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 502/499-3195 Fax Evansville, IN 812/425-4491 812/425-1171 Fax Corbin, KY 606/528-3700 606/528-9014 Fax Lexington, KY 859/259-3456 859/254-0783 Fax Stanville, KY 606/478-9201 606/478-9208 Fax Paducah, KY 270/444-8390 270/575-4907 Fax Indianapolis, IN 317/872-8410 317/872-8417 Fax Ft.Wayne, IN 260/489-4551 260/489-1620 Fax

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 913/371-3870 Fax Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620

Construction Equipment Guide • Off-Road Trucks Section • www.constructionequipmentguide.com • September 26, 2015 • Page 61

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 906/786-5813 Fax Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 920/532-0526 Fax DeForest, WI 608/842-4151 608/842-4193 Fax Eau Claire, WI 715/874-5400 715/874-5401 Fax Franksville, WI 262/835-2710 262/835-2844 Fax Schofield, WI 715/355-9898 715/241-0044 Fax

GENERAL EQUIPMENT & SUPPLIES www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 701/364-2190 Fax 905 20th Avenue SE Minot ND, 58701 800/852-0479 3500 Apple Creek Road Bismarck, ND 58504 800/279-4437 4082 2nd Ave. W Williston, ND 58801 701/572-0570

ARTICULATED TRUCKS From Komatsu – The Truck Experts

The redesigned Tier 4 Interim Articulated Trucks will boost your productivity and lower your costs. From increased payload to improved traction control, the truck experts at Komatsu once again deliver on your need for a lower cost per ton moved. t Komatsu Traction Control System (K-TCS) automatically increases performance in soft ground conditions. t New operator’s cab provides better visibility and ergonomics. t Efficient Tier 4 Interim engine provides up to an 8% reduction in fuel consumption. t Komatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.

www www.komatsuamerica.com .komatsuamerica.com

Page 62 • September 26, 2015 • www.constructionequipmentguide.com • Off-Road Trucks Section • Construction Equipment Guide

58 CHART from page

Mfg. Model

Articulated/ Rigid

DOOSAN A35G A35G FS

Drive Configuration 6x6 6x6

A A

KOMATSU A HM300-5 HM400-5 HD325-7 HD405-7 HD465-7 HD605-7 HD785-7 HD1500-7 730E-07 730E-8 830E-1AC 860E-1K 930E-4 930E-4SE 960E-2 960E-2K

VOLVO A35G A35G FS A40G A40G FS A25G A30G

A R R R R R R R R R R R R R R A A A A A A

6WD 6WD RWD RWD RWD RWD RWD RWD RWD RWD RWD RWD RWD RWD RWD RWD 6x6 6x6 6x6 6x6 6x6 6x6

Operating Weight Pounds (kgs) 138,230 (62,700) 139,112 (63,100) 117,881 (53,470) 165,644 (75,135) 152,740 (69,280) 165,520 (75,080) 219,760 (99,680) 242,900 (110,180) 360,253 (163,408) 550,000 (249,478) 715,000 (324,319) 724,000 (328,401) 850,650 (385,848) 1,001,700 ( 454,363) 1,106,670 (501,974) 1,115,000 (505,755) 1,270,000 (576,072) 1,270,000 (576,072) 138,230 (62,700) 139,112 (63,100) 153,662 (69,699) 154,765 (70,200) 102,515 (46,500) 113,759 (51,600)

Rated Payload Tons (Metric Tons) 37 (33.5) 37 (33.5) 30.9 (28) 44.1 (40) 40 U.S. (36.5) 45.2 (41) 61 (55) 69.4 (63) 100.3 (91) 158.9 (144.1) 203 (184) 200 (181) 244 (222) 280 (254) 320 (290) 320 (290) 360 (327) 360 (327) 37 (33.5) 37 (33.5) 43 (39.0) 43 (39.0) 26.5 (24) 31 (28.1)

Drive System Mech/Electr.

Engine Type

M M

Volvo D13J/16J Volvo D13J/16J Komatsu SAA6D125E-7 Komatsu SAA6D140E-7 Komatsu SAA6D140E-5 Komatsu SAA6D140E-5 Komatsu SAA6D170E-5 Komatsu SAA6D170E-5 Komatsu SAA12V140E-3 Komatsu SDA16V159E-2 Komatsu SSA16V159 Komatsu SSDA16V159 Komatsu SDA16V160 Komatsu SSDA16V160 Komatsu SSDA16V160 Komatsu SSDA18V170 Komatsu SSDA18V170 Komatsu SSDA18V170 Volvo D13J/16J Volvo D13J/16J Volvo D13J/16J Volvo D13J/16J Volvo D11L Volvo D11L

M M M M M M M M DC Elec AC Elec AC Elec AC Elec AC Elec AC Elec AC Elec AC Elec M M M M M M

Komatsu’s Off-Highway Truck Features Clean Engine Komatsu America Corp.’s HD785-7 offhighway truck features a powerful, clean Komatsu SAA12V140E-3 turbocharged, after cooled engine that provides a maximum net output of 1,178 hp. High Performance for Enhanced Productivity The truck’s engines deliver faster acceleration and higher travel speeds with high horsepower per ton. High torque at low speed, impressive acceleration and low fuel consumption ensure maximum productivity. The mode selection with variable horsepower control (VHPC) system selects the appropriate mode (either power or economy) based on the working condition. The VHPC system detects the truck’s load and selects the optimum horsepower setting mode, providing high production and low fuel consumption, according to the manufacturer. The fully automatic transmission selects an optimum gear according to the travel and engine speed. To reduce fuel consumption, the shifting point is automatically selected depending on the machine’s acceleration. The automatic retard speed control system (ARSC) with a large capacity retarder allows operators to set downhill travel speed at a

constant level so the operator can concentrate on steering. Its cooling oil temperature is consistently monitored so the speed is automatically reduced if the retarder oil temperature rises. The Komatsu designed electronically controlled all clutch modulation system with K-ATOMiCS optimizes the clutch engagement oil pressure at every gear for smoother shifting with minimal torque shock. The HD785-7 features an extra-long wheelbase, a wide tread and a low center of gravity to haul its load at higher speed for greater productivity and deliver driving comfort over rough terrain. Enhanced Cab Design for Optimal Operator Comfort and Safety The HD785-7 is equipped with an ergonomically designed cab that provides a quiet and comfortable operator environment. The spacious cabs are mounted with Komatsu’s viscous mounts to keep noise at a minimum and provide a low-vibration operating environment. A low effort body dump control level makes dumping loads significantly easier. The pedal-operated secondary brakes activate the front disk brakes and parking brakes. When hydraulic pressure

Komatsu’s HD785-7 off-highway truck features a Komatsu SAA12V140E-3 turbocharged, after cooled engine that provides a maximum net output of 1,178 hp.

drops below the rated level, the parking brake is automatically activated. The fiveway adjustable operator seat and the tilt-telescopic steering column provide and optimum driving posture for increased driving comfort and better control over the machine’s operation. Durability and Reliability Provide Easy Maintenance Flat face-to-face O-ring seals are used to securely seal all hydraulic hose connections

and to prevent oil leakage. The main harnesses and controller connectors are equipped with sealed DT connectors that provide high reliability and dust and water resistance. The fully hydraulic controlled wet multiple-disc brakes ensure reliable and stable brake performance. Wet disc brakes are fully sealed to keep contaminants out, reducing wear and maintenance. Both the filters and greasing points are centralized for easier servicing. To minimize operating costs, oil change intervals are extended to 500 hours for engine oil and 4,000 hours for hydraulic oil. The HD785-7 is equipped with Komatsu’s vehicle health monitoring system (VHMS) to allow easy access to summary performance data. Using a satellite communications system and optional wireless download, the Komatsu VHMS allows technicians to use a simple internet interface to easily check the pressures and trends, summarize yesterday’s payload, and be quickly alerted of critical faults. For more information, visit www.komatsuamerica.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Off-Road Trucks Section • www.constructionequipmentguide.com • September 26, 2015 • Page 63

KY 859.485.8500 | FL 863.533.8900

Highway Equipment Company of Ohio

Newman Tractor

1405 Timken Place SW • Canton, OH 44706 330-915-8391 • Fax: 330-915-8411 www.highway-equipment.com

2841 Verona Road • Verona, KY 41092 859-485-8500 • Fax: 859-485-8573 www.newmantractor.com

Page 64 • September 26, 2015 • www.constructionequipmentguide.com • Off-Road Trucks Section • Construction Equipment Guide

Dyna-Flo Liners ®

By Mentor Dynamics Ltd.

Cut Carry-back in Articulated Haulers & Loader Buckets Available for all models Job Site Installation Available CAD Designed Liner Parts

Increase Profits $$$$ Release Loads Quickly Reduce Carry-back Shorten Turn-around Time Haul More Loads Per Day

Pre-cut Replacement Parts Factory Trained Installers

MENTOR DYNAMICS LTD. 30 Years of Proven Dependable Service 1-800-942-2648 www.MentorDynamics.com

New From The Ground Up!

“The upper structure rotates 360°!”

Made in America

Don’t Settle Settle for Anything Less |

1 1-877-667-6652 - 877- 667- 6652 s mor morookacarriers.com ookacarriers.com

Booth N-3300

Construction Equipment Guide • Off-Road Trucks Section • www.constructionequipmentguide.com • September 26, 2015 • Page 65

Hydrema ydrema 912HM. O Off ff Road Road s superior. uperior. Talk T alk tto oY Your our loc local al de dealer aler or visit h hydrema.us ydrema.us

Page 66 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

RESPECTFULLY DISREGARDS CONVENTIONAL EXCAVATOR WISDOM. Plenty of people make compact excavators. But none can say they engineered the first mini-excavator, zero tail swing excavator, swing-boom excavator and rubber-tracked excavator. At Yanmar, we simply can’t stop innovating. That’s why our nine excavators – seven with true zero tail swing – are each purpose-built to overcome the most challenging conditions, work with unparalleled power and conserve fuel. So, if you just want to play around on your jobsite, go get any old excavator. BUT IF YOU’D RATHER RULE YOUR JOBSITE, GET A YANMAR. RuleTheJobsite.com

BUCK & KNOBBY EQUIPMENT CO.

VERMEER MIDWEST

VERMEER OF IOWA

PAINT VALLEY EQUIPMENT

2801 Beverly Dr. Aurora, IL 60502 630-820-3030

3310 W. Coliseum Blvd. Fort Wayne, IN 46808 260-484-2494

PO Box 168-661 Hwy T14 Pella, IA 50219 641-628-2000

120 E. Martin Dr, Goodfield, IL 61742 309-965-3300

940 Garden Ln. Fowlerville, MI 48836 517-915-0555

CUSTOM TRUCK & EQUIPMENT

1801 179th St. North East Moline, IL 61244 309-751-9540

621 Spirit Valley E Dr. Chesterfield, MO 63006 636-532-2332

Vermeer Siouxland 4858 D Ave. Marcus, IA 51035 712-376-2310

10550 Twp Rd. 262 Millersburg, OH 44654 877-774-0081 Fax: 330-674-4031

7701 Highway 24 Kansas City, MO 64125 800-861-1065 www.cte-equipment.com

13402 Britton Park Rd. Fishers, IN 46038 317-842-1040

1098 Franklin St. Marne, MI 49435 616-677-5900

6220 Sterns Rd Ottawa Lake, MI 49267 734-856-2811

Vermeer of Eastern Iowa 101 Commerce Blvd. Tipton, IA 50219 563-886-2444

ROEDER IMPLEMENT INC. 2550 Rockdale Rd. Dubuque, IA 52003 563-557-1184 Fax: 563-583-1821

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ September 26, 2015 â&#x20AC;¢ Page 67

www.arnoldsinc.com Arnoldâ&#x20AC;&#x2122;s of Kimball 701 State Hwy 55 E â&#x20AC;¢ Kimball, MN 55353 320/398-3800 Arnoldâ&#x20AC;&#x2122;s of Glencoe 655 Lindbergh Trail â&#x20AC;¢ Glencoe, MN 55336 320/864-5531 Arnoldâ&#x20AC;&#x2122;s of St. Martin 374 Industrial Drive â&#x20AC;¢ St. Martin, MN 56376 320/548-3285 Arnoldâ&#x20AC;&#x2122;s of Mankato 1715 Howard Drive â&#x20AC;¢ No. Mankato, MN 56003 507/387-5515 Arnoldâ&#x20AC;&#x2122;s of St. Cloud 2995 Quail Rd. NE â&#x20AC;¢ Sauk Rapids, MN 56379 320/251-2585

BURRIS EQUIPMENT CO. www.burrisequipment.com 2216 N. Green Bay Rd. â&#x20AC;¢ Waukegan, IL 60087 847/336-1205 Fax: 847/336-2697 27939 W. Concrete Dr. â&#x20AC;¢ Ingleside, IL 60041 815/363-4100 2001 Cherry Hill Rd. â&#x20AC;¢ Joliet, IL 60433 815/464-6650 Fax: 815/464-6951

COLUMBUS EQUIPMENT COMPANY www.columbusequipment.com 50 Kingston Ave. â&#x20AC;¢ Columbus, OH 43207 614/443-6541 12500 Williams Road â&#x20AC;¢ Perrysburg, OH 43551 419/872-7101 7570 New Carlisle Pike â&#x20AC;¢ Dayton, OH 45424 937/879-3154

Do great things with Kubotaâ&#x20AC;&#x2122;s SVL Series compact track loaders.

0 Down, 0.99% Financing for 60 Months

A.P.R.

(Excluding SVL-75)

1st CHOICE EQUIPMENT LLC 124 N. Schmale Rd. â&#x20AC;¢ Carol Stream, IL 60188 630/510-6050 Fax: 630/510-6051

Offer ends 9/30/15.

LANO EQUIPMENT INC. www.lanoequip.com

6140 Highway 10 Anoka, MN 55303 888/448-5266

3021 133rd St. SW Shakopee, MN 877/753-6100

23580 Highway 55 Loretto, MN 888/479-4342

kubota.com

1305 Sentry Drive â&#x20AC;¢ Waukesha, WI 53186 262/521-5802 Fax: 262/521-5801 HAUG-KUBOTA, LLC. www.haugkubota.com 3585 E. Hwy 12 E. Willmar, MN 56201 320/235-2717 Fax: 320/235-2771

NIEBUR TRACTOR & EQUIPMENT, INC. www.nieburtractor.com 14380 240th St. E. Hastings, MN 888/839-6860

*$0 Down, 0.99% A.P.R. for 60 months on new Kubota ZP, ZD, ZG (excluding Z/ZG100), Z700, M Narrow, M96S, M108S, and M9960HDL, TLB (excluding B26), K008, KX (excluding KX040-4, KX057-4, KX080-4), U Series (excluding U35-4, U55-4), R Series (excluding R530/630) and SVL (excluding SVL-75) equipment is available to TXDOLÂ¿ HG SXUFKDVHUV IURP SDUWLFLSDWLQJ GHDOHUVÂ¶ LQ VWRFN LQYHQWRU\ WKURXJK ([DPSOH $ PRQWK PRQWKO\ LQVWDOOPHQW UHSD\PHQW WHUP DW $ 3 5 UHTXLUHV SD\PHQWV RI SHU Â¿ QDQFHG $ 3 5 LQWHUHVW LV DYDLODEOH WR FXVWRPHUV LI QR GHDOHU GRFXPHQWDWLRQ SUHSDUDWLRQ IHH LV FKDUJHG 'HDOHU FKDUJH IRU GRFXPHQW SUHSDUDWLRQ IHH VKDOO EH LQ DFFRUGDQFH ZLWK VWDWH ODZV ,QFOXVLRQ RI LQHOLJLEOH HTXLSPHQW PD\ UHVXOW LQ D KLJKHU EOHQGHG $ 3 5 $ 3 5 DQG ORZ UDWH Â¿ QDQFLQJ PD\ QRW EH DYDLODEOH ZLWK FXVWRPHU LQVWDQW UHEDWH RIIHUV )LQDQFLQJ LV DYDLODEOH WKURXJK .XERWD &UHGLW &RUSRUDWLRQ 8 6 $ 'HO $PR %OYG 7RUUDQFH &$ VXEMHFW WR FUHGLW DSSURYDO 6RPH H[FHSWLRQV DSSO\ 2IIHU H[SLUHV 6HH XV IRU GHWDLOV RQ WKHVH DQG RWKHU ORZ UDWH RSWLRQV RU JR WR ZZZ NXERWD FRP IRU PRUH LQIRUPDWLRQ 2SWLRQDO HTXLSPHQW PD\ EH VKRZQ

ABC EQUIPMENT RENTAL & SALES INC. www.abcequipment.com 29 Pearl Rd. â&#x20AC;¢ Brunswick, OH 44212 888/572-3888 Fax: 330/220-4949 38525 Chester Rd. â&#x20AC;¢ Avon, OH 44011 440/934-7368

Â© Kubota Tractor Corporation, 2015

Page 68 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GRA Plans to Increase the Profile of Equipment Rental Around the World The Global Rental Alliance (GRA), made up of seven peer equipment rental associations from throughout the world, held its mid-year meeting via webinar in late-August with executives of member associations present. Consistent with its purpose to increase the profile of the industry worldwide and benefit its individual membership, the Global Rental Alliance representatives discussed pertinent common initiatives, and also unique issues and programs of its respective associations. Differences exist within the industry of each country due to their specific economic, social and regulatory environment. Membership initiatives are central to each association, with the performance of their rental industry within the global economy always being pertinent. Of particular note among the group were standards and education for the party/event industry and aerial equipment, as they impact safety. Availability of skilled labor remains a topic of priority, as does equipment

theft and efforts to address theft rates. Representatives identified topics for further discussion at their 13th annual meeting to be held Feb. 25, 2016, at The Rental Show in Atlanta. This fall, an Australian rental representative will travel to the United States to participate in the GRA International Business Leadership Program, which is administered by the ARA Foundation. This job shadow program continues to build awareness of the importance of equipment rental worldwide and the value of networking on a global level. A U.S. representative traveled to Australia in the late spring for a similar opportunity. The countries continue to share best practices that benefit their members and maintain a focus on equipment technology developments, industry research data and statistics, conference programs and education/training. About the Global Rental Alliance The Global Rental Alliance consists of seven independent equipment

rental/hire trade associations that have joined together to increase the understanding and concept of equipment rental worldwide. They are: Brazilian Rental Association (ALEC); Canadian Rental Association (CRA); European Rental Association (ERA); Hire Association Europe, U.K. (HAE); Hire and Rental Industry Association Ltd., Australia (HRIA); Hire Industry Association of New Zealand (HIANZ); and American Rental Association (ARA). Each organization has as its members, businesses that rent equipment to the general public and suppliers or manufacturers that provide equipment or services to rental businesses. While inventories differ somewhat within each country, they essentially include equipment rented to the construction, homeowner, and special event/party industries. For more information, visit www.GlobalRentalAlliance.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Less Than 30 Pieces of WTC Steel Remain By Rik Stevens ASSOCIATED PRESS

In an airplane hangar at New York’s Kennedy Airport, fewer than 30 pieces of steel remain from the debris recovered after terrorists flew hijacked planes into the World Trade Center’s twin towers on Sept. 11, 2001. Even 14 years after the attacks, applications are still pending for the pieces of metal — mostly for memorials and museum exhibits — and some pieces found a new home as recently as September in New Hampshire, Massachusetts and Florida. Here’s a look at what has become of the relics of the World Trade Center: How Much Steel? Beginning in August 1968, builders used 200,000 tons of steel to build the World Trade Center complex, enough to raise the twin towers to heights of 1,362 ft. (south tower) and 1,368 ft. (north tower). Out of 1.8 million tons of debris removed from the site after the attacks, recovery workers collected 840 pieces of steel, some of which were cut up to make a total of 2,200 separate items. They ranged from 6-in. slabs to massive beams to the 7.5 tons the Navy used in the construction of the warship USS New York. Where Did It Go? The artifacts can be found anchoring memorials or museum exhibits in all 50 states and eight countries: Germany, Canada, Brazil, South Korea, The United Kingdom, Afghanistan, China and Ireland. The Port Authority of New York and New Jersey oversees the artifact program, review-

ing applications and parceling out the steel and other items to about 1,500 individual nonprofit groups, governments or museums so far. The artifact must be available for the public to view it. How Much Is Left? Fewer than 30 pieces of steel, including pieces of rail tracks, remain. Fewer than 70 other artifacts such as clothing or toys also remain in Hangar 17 at Kennedy Airport. Are Items Still Being Sought? Yes. Thirty applications are pending approval, and 40 others are in the review process. Even as recently as early September, an 8-ft.-long, 1,100-lb. steel beam arrived in Portsmouth, N.H., while other pieces were distributed to Ware, Mass., and the Kennedy Space Center in Florida during August. The Ware Fire Department is building a second memorial using trade center artifacts. It received a 1,600-lb. piece of steel in August that will be used in a memorial that is still being discussed. At the space center, the beam will be the centerpiece of a permanent memorial at Fire Station No. 1. That memorial includes small-scale replicas of the twin towers. Was Any of the Steel Recycled or Discarded? No. The Port Authority’s mission was to preserve the artifacts and distribute them to worthy groups to memorialize the attacks. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Sievers JCB

Fairchild JCB

406 Old Rt 66 Hamel, IL 62046 618-633-2622

15735 Central Avenue NE Ham Lake, MN 55304 763-434-3832

8080 State Rt 16 Hillsboro, IL 62049 217-532-3222

3100 Highway 13 West Burnsville, MN 55337 952-697-1720

State Route 267 South Greenfield, IL 62044 217-368-2486

2140 Hutson Road Green Bay, WI 54303 920-494-8726

14464 Shad Rd Carlinville, IL 62626 217-854-3191

2815 Mary Street Marinette, WI 54143 715-735-0402

1351 W Jackson St Auburn, IL 62615 217-438-6111 www.sieversjcb.com

5217 Heffron Court Stevens Point, WI 54481 715-341-6846 www.fairchildjcb.com

Rueter’s

General Equipment & Supplies, Inc.

1132 31st Ave Council Bluffs, IA 51401 712-366-5221 2425 NE 126th Ave Elkhart, IA 50073 515-367-3054 5815 Lincoln Way Ames, IA 50014 515-268-0939 Hwy 30 West Grand Junction, IA 50107 515-738-2571 23296 Hwy 30 East Carroll, IA 51401 712-792-9294 E Highway 275 Neligh, NE 68756 402-917-5604 www.ruetersjcb.com

Sellers JCB 1645 S. West St. Wichita, KS 67213 316-943-9311 Fax: 316-943-8116 3030 S. W. 57th St. Topeka, KS 66609 785-862-0031 400 N. Chicago St. Salina, KS 67401 785-823-6378 395 N. Industrial Dr. Garden City, KS 67846 620-275-9621 www.sellersequipment.com

4300 Main Avenue Fargo, ND 58103 701-282-2662 Fax: 701-364-2190 905 20th Ave. SE Minot, ND 58701 701-582-0479 3550 Apple Creek Road Bismarck, ND 58504 701-223-9700 4082 2nd Ave. West Williston, ND 58801 701-572-0570 www.genequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 69

Tackle any challenge with the innovative PowerBoom on JCB Skid Steers. Step in and take control. This revolutionary single-armed machine powers through every job while giving operators the best visibility available and safer side-door entry. This year, JCB is celebrating 70 equipment business. To commemorate this milestone anniversary, we are offering industry leading finance offers including 0% for up to 70 products ffrom rom the the JCB JCB range. months on select products Go to jcbna.com/0for70 to learn more.

*Offer valid until October 31, 2015 on select new JCB Skid Steers and Compact Track Laoders at participating JCB dealers. Offer may change without prior notice, and additional terms and conditions may apply. Subject to JCB Finance approval. See a participating JCB dealer for full details.

CONTACT YOUR JCB DEALER FOR MORE INFORMATION.

JCB of St. Louis 7978 Veterans Pkwy. St. Peters, MO 63376 636-281-4450

CSTK JCB 400 Shawnee Avenue Kansas City, KS 66105 913-371-0868 www.cstkjcb.com

MH JCB

Diesel Machinery Inc.

JCB of Chicago

11715 W Silver Spring Road Milwaukee, WI 53225 262-783-7510

106 Circle Freeway Dr, Cincinnati, OH 45246 513-681-2200

4301 N Cliff Ave, Sioux Falls, SD 57104 888-753-8907

1603 E Algonquin Rd Arlington Heights, IL 60005 847-437-8686

7001 Manufacturers Drive Madison, WI 53704 608-243-9253 www.buyjcb.com

3306 Gilmore Industrial Blvd, Louisville, KY 40213 502-962-6560

39288 133rd St, Aberdeen, SD 57401 888-484-6312

16754 New Ave Lemont, IL 60439 630-257-1261

5859 Raymond St, Indianapolis, IN 46241 317-240-6300 www.mhjcb.com

3801 N Deadwood Ave Rapid City, SD 57702 800-658-3047 www.dieselmachinery.com

1548 Huntwood Dr Cherry Valley, IL 61016 815-332-8222 www.jcbchicago.com

YES JCB

Page 70 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LiuGong 856H Takes on Tough Tasks at Jiangyin Port

At Jiangyin Port’s Dock 2, LiuGong 856H wheel loaders are used to unload and stack the coal.

Chang Jiang is the longest river in China and the third longest in the world after the Nile and Amazon. After the river flows into Jiangsu Province, it becomes gentle and wide enough for large tonnage ships from the ocean to enter directly. The flourishing shipping transportation industry has bred a high demand for modern and efficient equipment to work at international ports terminals worldwide. ChangHong International Port Company Located in JiangYin, Jiangsu Province, ChangHong International Port Company is a large river transport and storage company for coal and bulk cargos. Due to its geographical advantages and flexible operation mechanisms, Jiangyin Port has become the largest and busiest river shipping terminal for coals in the region. At Jiangyin Port’s Dock 2, LiuGong 856H wheel loaders are used to unload and stack the coal. The maneuverable wheel loaders are used to continuously shovel and lift coal, with the machines’ characteristics ensuring that each run is completed to the highest standard within minutes. After a decade’s cooperation, the company now uses 18 LiuGong wheel loaders in total. “It is very busy at the port. Loading and unloading work normally continues

throughout the whole day, so we have extremely strict standards in choosing our wheel loaders — they need to meet our requirements in terms of safety, power and efficiency. We have tested lots of wheel loaders, but LiuGong products have always proven to be more than satisfactory,” said Wu Yibin, the equipment manager of ChangHong International Port Company. Why do I Trust “Made by LiuGong”? “We got to know LiuGong in 2003, when the port’s international business started booming. The dramatic increase in merchandising cargo coming through our port meant that we needed to upgrade our equipment. Being the leading company in China CE industry, LiuGong’s brand reputation speaks for itself — making it the natural choice of manufacturer, Wu said. “The first generation of LiuGong machines we specified performed excellently, working in conditions at the port that can be worse than construction fields or even mines. Our port is used mainly in the transportation of coal and bulk cargos, so the air is always filled with potentially harmful powders and dirt. What’s more, there is a lot of work that needs to be completed between piles of containers or even inside containers, but we are thankful that the LiuGong

machines can always get the job done, no matter how extreme the working environment or however limited the space. The wheel loaders are powerful, efficient, and can continually work day in, day out in the toughest circumstances. By using LiuGong machines, we have increased our productivity whilst reducing our costs. Because of this, LiuGong 856H and 856G wheel loaders are used as our primary equipment at the port,” Wu explained. The LiuGong 856H is a relatively new model — first introduced to the market in 2014 — but it has already served at the Jiangyin Port. “The new 856H is powerful and very easy to operate. The cab is spacious and large reforested glass improves the all-round visibility. The application of pilot control and automatic shift make its operation smooth and comfortable, and the sound insulation and air conditioner system help us to focus during long, tough working days. The machine is exceptionally easy to maintain because we only need to stand on the ground to accomplish all the necessary checks and replacements. This is why the 856H has proven very popular amongst our team,” said one operator at the port. “During our long cooperation, I have seen great potential in the LiuGong equipment,” added Wu. “Not only are the LiuGong

machines of the highest quality and durable enough to work at this challenging work site, they are very easy to control and maintain. LiuGong also gives us convenient service and support — the parts turn-around is quick and customer service staff are always on standby to help solve any problems. All of the above have helped us to manage many machines at our port and we continue to make profit amongst the fierce competition thanks to our choosing of LiuGong.” New Trends of the Port’s Transportation “In recent years, with the continuous development of ports’ transportation, belt conveyors have in some ways replaced wheel loaders in many ports terminals. Therefore, new wheel loaders will need to be flexible, efficient and be able to bear heavier loads in the future. Of course, timely and convenient service is also indispensable. But because we have had a long and successful relationship with LiuGong and have already built trust and confidence in the brand, I believe that our cooperation will continue long in the future,” Wu said. For more information, visit: www.liugong.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Paving

SECTION

Pages 71-84

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

Bergkamp’s MA30 Applies Treatment to Preserve Highways Bergkamp Inc., based in Salina, Kan., offers the MA30 frictional mastic surface treatment applicator that allows contractors and government agencies to apply frictional mastic surface treatment over highways, roads, parking lots and airport runways to protect the surface and extend the life of the pavement. It applies a material mix that is made to precise specification, which results in fewer operator calculations and on-the-job adjustments, minimizing operator training time. The full-length ribbon mixer works to maintain the proper material consistency, regardless of the truck engine speed during transport to the job site. the frictional mastic surface treatment is then applied over the existing pavement through a variable-width, low-pressure spray bar that has side-shift capabilities.

The MA30 frictional mastic surface treatment applicator that allows contractors and government agencies to apply frictional mastic surface treatment over highways, roads, parking lots and airport runways to protect the surface and extend the life of the pavement.

Frictional mastic surface treatment is a mixture of asphalt emulsion, increased levels of angular fine aggregates, recycled materials,

polymers and catalysts. The purpose of frictional mastic surface treatment is to minimize future maintenance treatments and get

traffic back on the pavement more quickly. The MA30 features a steel 3,000gal. (11,356 L) material tank, which contains a hydraulically driven, fullsweep ribbon mixer with counterflow mixing technology that keeps the aggregates in suspension. In-cab controls allow the driver to operate all systems, including the mixer start/stop/reverse and spray bar start/stop, height and width, sideshift and individual nozzle controls. Application is computer controlled with an onboard system that ensures accurate application rates by continuously varying the pump rate, based on the truck speed and spray width. Easy-access mastic strainers protect the pump and spray nozzles from clogging and potential damage by aggregates and solid material. The MA30 offers a technologi-

cally advanced low-pressure system that operates at less than 40 psi. It offers single or dual pump operation, with more than 100 gpm (378.5 Lpm) delivered through the spray bar in single pump mode and over 200 gpm (757 Lpm) delivered in dual pump mode. In dual pump operation, the product loads in less than 30 minutes. All systems are powered by PTO-driven hydraulic pumps. The hydraulically adjustable spray bar provides double overlap spray widths from 72 to 234 in. (183 to 594 cm) in 18 in. (45.7 cm) increments. For more information, call 785/825-1375 or visit www.bergkampinc.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Wacker Neuson Ride-On Trowel Features Tier IV Engine Wacker Neuson has upgraded its 10-ft. (3 m) hydraulic ride-on trowel to reflect the demanding needs of the professional concrete contractor. The latest addition to the expanding ride-on trowel line features a more powerful Tier IV final engine and heavy-duty hydraulic cooling system. Contactors can use this trowel to pan the floors “tight” in high ambient air temperatures. The new CRT 60-74L is powered by a 74-hp Kohler, non-DPF Tier IV final engine. The boost in horsepower provides for better finishing by providing a stable, consistent engine and blade speed. The CRT 60-74L can easily maintain blade speed under a high load finishing condition. An improved hydraulic drive system includes a cooler to the open loop hydraulic system that keeps the overall hydraulic system temperature down, improving performance and the life of the machine. Wacker Neuson’s CRT 60-74L provides a unique driving experience. An added gyro assisted steering feature compensates for any unwanted machine rotation and

allows the operator to stay on a steady course with less fatigue. The unit continues to feature a power steering system. Wacker Neuson was able to combine fully hydraulic drive performance with a dual mode power steering system that makes operation more comfortable and the trowel more responsive to the operator’s command. The dual mode system allows the operators to select the response of the joysticks to meet their preference and best suit the concrete condition. The engine power regulation system continues to be an important feature of Wacker Neuson’s 10 ft. professional rider. Similar to an automatic transmission in a car, this system will constantly monitor engine speed and adjusts the hydraulic load, allowing the unit to seamlessly run at optimal engine and blade speed for maximum power input to the concrete. Other features that concrete finishers will appreciate include the built-in hydraulic wheel kit. This allows operators to easily raise the machine on the front and back

The latest addition to the expanding ride-on trowel line features a more powerful Tier IV final engine and heavyduty hydraulic cooling system. Contactors can use this trowel to pan the floors “tight” in high ambient air temperatures.

wheels to change blades or install pans without the need of a forklift or cranes. The builtin system also allows for easier movement around the job site or shop. Operator comfort features include an electronic cruise control,

adjustable seat, plenty of legroom, ergonomically positioned arm rests and simple joy stick controls, fully hydraulic blade pitch and six working lights. Wacker Neuson’s 60-in. (152 cm), CRT 60-74L is the largest model of Wacker Neuson’s extensive concrete ride-on trowel line. Contractors and dealers will find that this model with the latest Tier IV final turbo charged engine and additional improvements meet or exceeds competitive model’s specifications. The unit offers a high blade speed of up to 150 rpm, hydraulic blade pitch, 2-speed engine throttle and large 12gal. (45 L) fuel tank that offers four hours of uninterrupted run time. Weighing in at 2,650 lbs. (1,202 kg), with six blades per rotor and a path width of 123-in. (312 cm), Wacker Neuson’s CRT 60-74L is an ideal machine for professional concrete contractors looking for high performance on large jobs. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 72 • September 26, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Successful Projects…

Material Level, Paver Speed Prove Essential for Paving This article is the second of a four-part series on paving provided by Volvo Construction Equipment. Successful asphalt paving projects don’t happen by accident. They are the result of careful planning and proper preparation. From proper paver setup to achieving optimum mat temperature and conducting the rolling pattern at just the right time — each step in the process will affect the next. And attention to detail throughout the process can mean the difference between getting a bonus and being delayed. In the previous installment, best practices for paver setup were shared. After ensuring the paver is in top working condition, the crew must then focus on the factors that will yield the best quality pavement. Material level and paver speed both play a significant role in determining pavement quality. Laying a Quality Mat On almost every asphalt paving project, the crew can spend from a few minutes to nearly an hour setting up equipment, depending on the condition of the equipment and the complexity of the project. Pavers, compactors and MTVs must all be prepped for the long hours of use to help ensure uptime. Once the equipment is in use, the paving crew can fine-tune operations in order to lay

the best quality pavement. The two most important factors for laying a quality mat are all about consistency: 1. Consistent head of material in front of the screed 2. Consistent paving speed Material Level More than 95 percent of all material faults in asphalt paving are due to an improper head of material in front of the screed. The “head of material” is the mass of paving mix that lies directly in front of and spans the width of the screed. If the head of material in front of the screed fluctuates widely during the course of paving, it is nearly impossible to produce a level and smooth pavement surface. “Too much or too little material affects how the screed rides and that translates to poor rideability,” said Chris Connolly, operator training specialist of Volvo Construction Equipment. If the head of material increases, then more material is being forced under the screed, causing it to rise. This fluctuation in mat depth translates into a wavy surface. If the head of material decreases, there will be less material passing under the screed and supporting the weight of the screed. The screed will gradually drop, reducing the mat thickness and causing major flaws in the mat.

The correct head of material should be constant across the entire width of the screed. A good visual cue is whether the material is even with the center of the auger shaft. While monitoring material levels is the responsibility of the screed operator, many machines are now equipped with automatic feed systems that use sensors to automatically regulate the proper delivery and flow of material in front of the screed to ensure smooth and consistent paving. Paving Speed Paving speed also has an impact on the quality of mat. In an ideal paving operation, the paver will operate nonstop throughout the day because a change in paving speed can directly affect the ability to lay a uniform mat. When selecting a paving speed, several considerations should be made. These include the number and size of trucks, volume and output of the mixing plant, rolling and compaction rates and crew capabilities, plus the distance from the mixing plant to the paver. The hot mix material needs to arrive at the site hot to allow for proper laydown and compaction. It is important to select a speed that falls within the limits of these considerations. Once speed is selected, it must be consistently maintained. Ripples, waves and irregular mat depth can occur when paving

speed doesn’t remain relatively consistent. Speed limiters are available on some paver models to control paving speed. The function is similar to cruise control for an automobile. A preferred paving speed is selected on the speed limiter — 30 to 40 feet per minute for example — and the paver is limited to that speed. Changes in speed also create challenges with timing the delivery of hot mix material in order to keep the hopper at least a third full. Consequently, changes in paving speed are commonly caused by trucks inconsistently arriving at the job site, or bumping the paver during the truck exchange. Even the smallest bump can create a depression behind and beneath the screed. Subsequent rolling may not fix this surface defect and can often be felt by traffic after the fact. To avoid negatively impacting the mat, truck drivers should stop 1 to 2 feet in front of the paver, allowing the paver to initiate contact. With the paver properly set, and the mat laid with perfect head and consistent speed, it’s time for the compaction operation. Stay tuned for Part 3 of the series, which will cover best practices for compaction. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

GOMACO Commander III Features G+ Control System

An engineer’s concept drawing illustrates the the Commander III.

The GOMACO Commander III multi-application slipform paver just got better. The three-track Commander III is driven by the GOMACO G+ control system and the Tier IV engines. The next generation Commander III features a redesigned frame and operator’s platform with a pivoting operator’s control console. The frame was rebuilt to accommodate Tier IV engines and their cooling packages. The placement of the engine in the framework is reversed to provide increased operator visibility and the redesigned engine shroud provides easy access to service and fill points. The pivoting operator’s console allows the operator to have hands-on control and ultimate visibility no matter what application is being slipformed or what the direction of travel. The three-track Commander III is available with an optional on-board camera as a device to monitor designated areas of the slipforming process. The camera can be positioned anywhere around the paver and feeds live to the G+ display on the console. Along with the increased operator visibility, the Commander III offers increased operator comfort. The oper-

ator’s platform is now isolated to eliminate vibration. It’s also quieter to work on the platform or around the machine. The Commander III has an optimized cooling package with the hydraulic fan controlled by G+ to adapt cooling needs to jobsite conditions for both a quiet and efficient operation. It has improved fuel efficiency with a power-optimized engine and load-sensed hydraulic circuits. Excellent fuel efficiency combined with an increased fuel capacity allows an uninterrupted day of paving on the project. The Commander III has the GBox on every leg to accommodate improved steering and grade with G+ controls. It’s part of GOMACO’s electronic and hydraulic initiative. GBox features a new location for the slave controller and proportional valves, reduces hose and wiring needs, eases serviceability and troubleshooting and provides easy access with a horizontal swing door at ground level. G+ controls make all of these advancements possible on the Commander III, including hydraulic fan speed, pivoting operating console, the electronic and hydraulic initiative and more. G+ controls also accommodate telematics for remote engine and machine monitoring. For more information, visit gomaco.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • September 26, 2015 • Page 73

Page 74 • September 26, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Volvo SD75B, SD115B Compactors Roll With the Punches The SD75B and SD115B soil compactors are the latest Tier IVFinal soil compactors from Volvo Construction Equipment. These versatile and intelligent machines help operators achieve the highest level of performance and efficiency possible, whatever the demands of the job, according to the manufacturer. The advanced drum control system, for example, easily allows the operator to adjust the frequency and amplitude, compensating for changing soil types and conditions. Two frequency settings come as standard, but five can be included as an option. High or low amplitude can be selected to adjust the drum’s dynamic force based on the job and material depth. Meanwhile, the optimized centrifugal force and auto-vibration feature enhance performance, ease of operation and productivity. The traction system provides enhanced climbing and stability in difficult applications, such as steep inclines or slippery surfaces, preventing wheel or drum spin for gradeability. The SD75B and SD115B can be set up in three different configurations and are available with a smooth or padfoot drum. The compactor also can be quickly and easily converted from a smooth drum by clamping on a padfoot shell — further improving versatility. “These new models offer the perfect mid-range size and exceptional versatility to accomplish any compaction job,” said Mark Eckert, compaction product manager at Volvo Construction Equipment. “Whether for major highway projects or for general site preparation, the SD75B and SD115B adapt to changes in conditions, ensuring the contractor can use it for any job that arises — no matter the application or the terrain.” Exceptionally Efficient The Tier IV Final Volvo engine delivers high torque at low rpm for reduced emissions and fuel consumption without compromising on power. ECO mode now comes as standard on the SD75B and SD115B models and can achieve up to a 40 percent reduction in fuel consumption by matching engine

The SD75B and SD115B can be set up in three different configurations and are available with a smooth or padfoot drum.

“Whether for major highway projects or for general site preparation, the SD75B and SD115B adapt to changes in conditions, ensuring the contractor can use it for any job that arises — no matter the application or the terrain.” Mark Eckert Volvo Construction Equipment

speed to operation mode. Additionally, the intelligent design provides quicker ramp-up speeds at lower pressure, further increasing fuel efficiency. The passive regeneration automatically cleans the filters during normal operation without any input from the operator or negative impact on performance. The hydraulically driven fan with variable speed draws power only when needed, which reduces noise, improves operator comfort and results in a lower total cost of ownership.

Comfort and Control The B-Series compactors also help to promote high operator efficiency and productivity, due to a cab with excellent visibility, grouped ergonomic controls and a comfortable environment. The ROPS/FOPS certified cab has floor-to-ceiling glass for a commanding view of the job site, with clear sightlines down to the forward drum. The fully adjustable seat rotates and slides to further enhance visibility and comfort. The new high-tech color operator display shows operational infor-

mation and key diagnostics, and is easily visible at all times — even in bright sunlight, according to the manufacturer. Robust and Reliable The SD75B and SD115B are backed by the Volvo Lifetime Frame and Structure Warranty, which covers the frames and articulation joints of the compactors. The B-Series models feature the high quality components, clever routing and a clean design. The heavy-duty drum, center joint and

front frame components are engineered and manufactured for longevity and performance. The frames are welded and built from high-quality steel guaranteeing a strong structure. All components and electronics have been moved into the cab and mounted on the rear wall to protect them from harsh environmental factors. A tilting cab is standard on the B-Series models to provide easy service access to all hydraulic components. The engine hood lifts electrically for extensive ground level access to the engine compartment. Maintenance and inspections can be conducted more efficiently with minimal downtime, increasing overall productivity and reliability. For more information, call 717/532-9181 or visit www.volvo.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • September 26, 2015 • Page 75

Our rollers are pretty basic. Basically perfect. BOMAG improves on perfection with the BW120AD-4 roller. Want a roller that will finish the job better, faster and more efficiently? Then you want the BW120AD-4 from BOMAG. We took the top tandem-drum vibratory roller in its class and made it even better: A more powerful 33.8-hp diesel engine, a 14-percent faster working speed, and a larger operator’s platform with standard laterally sliding seat for better visibility. Improving perfection? That’s just the basics with BOMAG. To do the best job, you need the best equipment. To learn more visit www.bomag-americas.com, or call 1-800-78-BOMAG today.

THE COMPACTION EXPERTS

200 Erb Industrial Dr. Fenton, MO, 63026 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563

Cuba, MO 573/885-0500 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800

W250 N6851 Hwy 164 Sussex, WI 53089 262/246-5700 262/246-5719 Fax Madison, WI 608/222-9191

Eau Claire, WI 715/832-3443 De Pere, WI 920/338-5800 Abbotsford, WI 715/223-2381 Negaunee, MI 906/475-4181

10874 East Pike Rd. Cambridge, OH 43725 740-432-6303 www.southeasternequip. com Evansville, IN 47715 812-476-7321 Fort Wayne, IN 46808 260-483-8868 Indianapolis, IN 46268 317-872-4877

Burlington, KY 41005 859-586-6133 Holt, MI 48842 517-694-0471 Novi, MI 48374 248-349-9922 Brilliant, OH 43913 740-598-3400 Brunswick, OH 44212 330-225-6511

Dublin, OH 43016 614-889-1073 Gallipolis, OH 45631 740-446-3910 Heath, OH 43056 740-522-3500 Mansfield, OH 44903 419-529-4848 Marietta, OH 45750 740-374-7479

Mentor, OH 44060 440-255-6300 Monroe, OH 45050 513-539-9214 North Canton, OH 44720 330-494-3950 Perrysburg, OH 43551 419-874-0331 Troy, OH 45373 937-416-6397

1400 W. Ogden Ave. Naperville, IL 60563 630/355-7150 Rockford, IL 815/961-3160 South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Rockdale, IL 815/730-9011

Page 76 • September 26, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

The Worldwide Leader in Concrete Paving Technology Announcing Our New Distributor in Arizona

info@gomaco.com ❘ www.gomaco.com CONCRETE STREETS AND HIGHWAYS ❘ AIRPORT RUNWAYS ❘ CURB AND GUTTER ❘ SIDEWALKS RECREATIONAL TRAILS ❘ SAFETY BARRIER ❘ BRIDGE PARAPET ❘ BRIDGE DECKS ❘ IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA ❘ 712-364-3347

ROAD MACHINERY & SUPPLIES CO.

SWANSTON EQUIPMENT COMPANY

Des Moines, IA 515/282-0404 • 800/555-1445 Sioux City, IA 712/252-0538 • 800/633-9104 Cedar Rapids, IA 319/363-9655 • 800/616-6615 Milan, IL 309/787-1742 • 800/633-9114

3450 West Main Fargo, ND 58103 800/369-0371 3915 Burdick Expressway E. Minot, ND 58703 800/210-8766

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • September 26, 2015 • Page 77

MT-

M413XT

Precision Spr y Products shown with optional equipment.

MAULDIN Paving Products is dedicated to developing products that exceed expectations. See for yourself what makes the industry’s best and heaviest screed lay down the Superior mats your company desires. With 10 years under the belt of proven results, the 10th Anniversary, Silver-16 Screed is better than ever.

MAULDIN Paving Products... MASTERS OF THE MA AT! T! N dealership today and review all the choices available from the MAULDIN Contact your MAULDIN 1750-C 2I¿FLDO &DWDORJ WR VSHF RXW D & WKDW SHUIHFWO\ PDWFKHV \RXU SDYLQJ SUHIHUHQFHV

FINKBINER EQUIPMENT CO. 15 W 400 North Frontage Road Burr Ridge, IL 60527 Ph: (630) 654-3700 Fax: (630) 654-3792 www.finkbinerequipment.com

Page 78 • September 26, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Atlas Copco Launches Dynapac CP1200 Pneumatic Tired Roller

The CP1200 tired roller has a flexible steel ballast to evenly distribute the tires for consistent ground pressure in any application, from finishing to sealing.

Atlas Copco’s Dynapac CP1200 pneumatic tired roller enhances efficiency, serviceability, safety and operator comfort, and achieves optimal compaction results. The roller’s new flexible steel ballast is distributed evenly between tires for consistent ground pressure between the front and rear tires. This also allows the weight to be easily adjusted for optimal performance in any application — from finishing to sealing. The roller includes a Tier IV Final compliant engine that meets the latest Environmental Protection Agency emission standards. The Tier IV Final engine reduces 90 percent of particulate matter and 90 percent of nitrous oxide emission (NOx) compared to a Tier III engine. The engine produces low levels of ambient noise due to thermostatically controlled cooling fans, which allow the operator to easily communicate with crews using a two-way radio. In addition, minimal engine noise lessens the risk of hearing damage for the operator. The CP1200 also is equipped with an ultrasmooth start/stop system so contractors can quickly and easily changes directions. The platform on the CP1200 is spacious and features operator-friendly controls and a swivel seat for optimal visibility from the operator station. This allows the operator to comfortably move from one side of the roller to the other to maintain optimal visibility and avoid having to strain his or her neck to get a clear view of the drum edge. It also gives operators the confidence to work faster. The unit also can be equipped with a cab with automatic climate control, which

automatically adjusts the temperature for operator comfort. Atlas Copco designed the CP1200 with its dual-circuit braking system that maintains full braking effect even if one circuit is disabled. This feature is critical for projects on inclined surfaces as it safeguards against damage and injuries, according to the manufacturer. The CP1200 has a compacting width of 5.77 ft. (1.7 m) and maximum operating weight of 26,400 lbs. (11,975 kg), which makes it ideal for a variety of applications from finishing to sealing. An optional DCA-A compaction analyzer records the rolling activity and recommends the optimum number of passes based on type of material being compacted, density needed and hours of operation. In addition to achieving the ideal density more quickly, the DCA-A analyzer also records the rolling patterns for analysis and quality assurance. With an optional air-on-the-run system, operators can adjust the tire pressure during the compaction process. This eliminates the need to manually adjust tire pressure, which minimizes downtime. The new heat cover wheel also improves compaction results. The new CP1200 shares many components and sub-systems with other Atlas Copco models so dealers can minimize their parts inventory and save money. For more information, call 800/732-6762 or visit www.atlascopco.us. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

ROLAND MACHINERY Springfield, IL 217/789-7711 Carterville, IL 618/985-3399 Portage, IN 219/764-8080 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 Eau Claire, WI 715/874-5400 DePere, WI 920/532-0165 Deforest, WI 608/842-4151 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898 2600 S. Lincoln Rd. Escanaba, MI 906/786-6920 Fax: 906/786-5813

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • September 26, 2015 • Page 79

CASEY EQUIPMENT COMPANY www.casey-equipment.com 1603 East Algonquin Rd. Arlington Heights, IL 60005 847/437-8686 Fax: 847/437-8738 16754 New Ave. Lemont, IL 60439 630/257-1261 Fax: 630/257-0614 1548 Huntwood Drive Cherry Valley, IL 61016 815/332-8222 Fax: 815/332-3056

The Best Tilt Hopper Paver Just J Got Better

Introducing the 1000G

RMS RENTALS 12520 Quentin Ave S. Suite 100 Savage, MN 55378 952/895-9595 800/888-9515

ROAD MACHINERY & SUPPLIES CO. 5633 W Hwy 13 Savage, MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia, MN 218/741-9011 800/752-4304 Negaunee, MI 906/475-6488 800/888-9565 Sioux City, IA 217/252-0538 800/633-9104 Des Moines, IA 515/282-0404 800/555-1445 Cedar Rapids, IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

g 8 - 13 ft LeeBoy Legend Screed System LeeBoy’s Under Auger Cut Off Gates 9” Steel Alloy Segmented Cast Augers Low Deck Configuration Hydrostatic Propulsion Controls Dual Control Stations Steel Track Drive with Automatic Adjustment

www. VT LeeBoy y,, Inc.

500 50 Lincoln County Pkwy Ext., Lincolnton, NC 28092

. com Call Ca all 704.966.3300

www ww ww w.LeeBoy .LeeBoy y.com

Page 80 • September 26, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

866-430-7539

www.jfwequipment.com sales@jfwequipment.com

Serving the Asphalt Industry for 25 Years New Marathon TPS250T tack distributor, Honda 5.5hp gas eng, 10GPM pump, 250 gallons, 5 ft spray wand w/40 ft hose, 10" filler lid, hose reel, 2 propane burners, flushing tank, molasses valve, electric brakes, pintle hitch

SAVE TIME • SAVE MONEY SAVE LABOR • SAVE OIL

2004 Blaw Knox PF 3200 paver, Ultimat 10-20 ft electric heated screed, power crown, slope & height, front wheel assist, Cummins dsl eng, new rear tires, new bogie tires

1999 Hypac C530AH pneumatic roller, 9 wheel rubber tire, Cummins 3.3L diesel engine, water system

2006 & 2009 Omni 318 screeds, 10 – 18 ½ ft, electric heat, power crown & slope, power screed up & down on extensions

1990 Ferguson 8-12B static double drum roller, 54” drums, J.D. diesel engine, water system

2001 Etnyre Quad 10-20 ft extendable chip spreader, Cummins dsl eng, folding rear hoppers, 4 wheel drive, computerized, new front tires

• No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA INTRODUCING FlangeLock Tool Boxes TM

New Marathon HEPR36 walk behind infrared heater, 3 ft x 3 ft, 360,000 BTU

4 Tool Boxes Available All Include Slugs and O'Rings.

1995 Rosco SPRH-H chip spreader, 12 ft spread hopper w/platform, hydrostatic drive, Cummins 5.9L diesel engine

2009 Hamm HD14VV double drum 54” vibratory roller, Hatz 40 hp water cooled diesel engine, double drum drive, water system

3517 Wayne White Rd., Climax, NC 27233

For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • September 26, 2015 • Page 81

Finkbiner Equipment Co. 15 W 400N Frontage Rd. Burr Ridge, IL 60527 630-654-3700 Fax: 630-654-3792 www.finkbinerequipment.com

Highway Equipment Company of Ohio 1405 Timken Place SW Canton, OH 44706 330-915-8391 Fax: 330-915-8411 www.highway-equipment.com

Contact your local dealer: McAllister Equipment Co. Contact your local 12500 S. Cicero Ave. Alsip, IL 60803 708.389.7700 Dealer Name Villa Park, IL 630.530.7600

City, SILT Rockford, 815.227.0555 123.456.7890 East Peoria, IL 309.694.4455

City, ST

Springfield, IL 123.456.7890 217.789.0351

City, ST 123.456.7890 City, ST 123.456.7890

Road Machinery & Supplies Co.

dealer: 5633 W Hwy 13 Savage, MN 952.895.9595 800.888.9515 Duluth, MN 218.727.8611 800.888.9535 Virginia, MN 218.741.9011 800.752.4304

Cedar Rapids, IA 319.363.9655 800.616.6615 Des Moines, IA 515.282.0404 800.555.1445 Sioux City, IA 712.252.0538 800.633.9104

DE DEALER ALER LOGO

You’re serious about getting your bonus. And your crew thanks you.

Our line of pavers and compactors sets the standard for reliable asphalt paving. W We e have a long history of proven technology and a reputation for industry-leading innovation. When it comes to maximizing your earnings, these machines deliver. See smart in action at volvoce.com/smartroads.

Page 82 • September 26, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Dual Pumps on New Bomag Rollers Increase Gradeability Part of Bomag’s new “Dash 5” Series of single drum rollers, the smooth drum BW177DH-5 and padfoot drum BW177PDH-5 feature a dual travel pump drive system for increased gradeability. With one travel pump dedicated to drum drive and one for the rear axle, these Bomag single drum rollers climb up to 24 percent higher grades than rollers employing a single travel pump and parallel flow hydraulic system. Built with no-spin rear differential, both the BW177DH-5 and BW177PDH-5 deliver up to 58 percent gradeability with vibration and 61 percent without. The rollers’ elevated front frame design increases the space between the drum and frame to prevent material plugging when compacting heavy cohesive soils. Both compactors offer two vibration frequencies of 1,860/2,280 VPM (31/38 Hz) and dual amplitude to tailor compaction output to jobsite conditions. The BW177DH-5 and BW177PDH-5 deliver 25,179 lb. (112 kN) centrifugal force in high

amplitude and 16,636 lb. (74 kN) in low to quickly compact up to 18-in. (45.7 cm) lifts of granular soil and up to 14-in. (35.5 cm) mixed-soil lifts. Excelling at compacting silts and clays, the padfoot BW177PDH-5 can quickly compact up to 8-in. (20.3 cm) thick lifts of these cohesive materials. Offering the latest in emissionsreducing technology, the Tier IV Final Kubota turbocharged diesel engine offer 74 hp (55.4 kW) output. Featuring the Bomag ecomode operation, the rollers use intelligent engine control to run the engine in the optimum range, resulting in up to 30 percent lower fuel consumption. The advanced BW177DH-5 and BW177PDH-5 vibratory rollers can be equipped with options that improve compaction performance, machine utilization and return on investment. Both rollers offer the optional Bomag Terrameter system, providing economical compaction and continuous compaction assessment during and after the project. The optional

Part of Bomag’s new “Dash 5” Series of single drum rollers, the smooth drum BW177DH-5 and padfoot drum BW177PDH-5 feature a dual travel pump drive system for increased gradeability.

Bomag Telematic, available for all Tier IV final machines, boasts advanced diagnostics to track roller location, operating hours, idle time, fuel consumption, engine service codes and maintenance reminders. The new Bomag BW177DH-5 and BW177PDH-5 single drum vibratory rollers offer an operating

speed ranging from 0 to 6.2 mph (0 to 10 kmh). Combined with high vibration output, the rollers compact up to 550 cu. yds./hr (420 cu m/hr) of granular soil, mixed soils at rates reaching 420 cu. yds./hr (321 cu m/hr) and up to 185 cu. yds./hr (141 cu m/hr) of cohesive soil. These versatile and productive rollers can be used on a wide range

of applications from residential and commercial construction to parking lots to utility and municipal projects to highway construction and maintenance. An updated operator’s compartment offers easy entry from either side of the machine and a more spacious operating platform with intuitive control layout for more comfortable roller operation. The optional climate controlled, fully enclosed cabin elevates operator comfort and productivity regardless of ambient weather conditions. Roller design delivers improved sightlines to the front and rear of the machine for increased operating safety. A wide opening engine hood and easy-to-reach service points from ground level simplifies machine maintenance to increase uptime. For more information, call 803/337-0700 or visit www.bomag.com/us. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

New F800T Offers High Visibility, Enhanced Productivity Atlas Copco’s Dynapac F800T tracked paver joins the company’s 10-ft. (3 m) highway class paver range. The paver meets Tier IV Final emission regulations and enhances productivity through operator comfort and optimal visibility, according to the manufacturer. The operator has high visibility of the paving surface with the paver’s dual, swingout operator platforms. The dual operator platforms swing out from each side to give the operator a clear view of the work site. The platforms also eliminate operator fatigue from prolonged leaning that can occur when an operator strains in a stationary seat to get a clear view of the work surface. Ergonomically designed control panels allow the operator to focus on paving and look out for nearby workers. All control and operational switches are grouped according to purpose and frequency of use, which allows the operator to quickly adjust paving settings without hampering production or risking safety. The F800T is equipped with a six-cylinder, Cummins diesel engine that meets Tier IV Final emission standards and minimizes ownership costs. The sixcylinder engine reduces strain on

engine components that typically occurs with four-cylinder engines, which as a result, minimizes maintenance costs and servicing downtime. Atlas Copco designed the F800T with features that maximize mat quality and tackle varying job requirements. Its Dynapac feed control system, for instance, eliminates material segregation and ensures continuous, uniform material flow by using four ultrasonic sensors and a thin center chain box auger system. The four sensors detect material heights and gaps to optimize both the auger and conveyor speed. The conveyor’s 6-in. (15 cm) wide chain box ensures continuous, uniform material

flow to the center of screed. And the augers have 17-in. (43 cm) diameter flights — among the largest in the industry — that eliminate centerline segregation. The paver also can be equipped with an optional, integrated hydraulic tunnel to eliminate material spillage toward the track and provide efficient material head. The F800T is equipped with a Carlson EZIV08-15 front-mounted electrical screed. The screed gives the operator an 8- to 19-ft. (2.4 to 5.8 m) working width and a mat as

high as 1 ft. (.3 m). A 34-kilowatt, hydraulically driven generator heats the screed to eliminate sticking and maintains a frequency control at 60 hertz regardless of the load or speed of the engine, which allows users to connect night lighting accessories to the machine. Atlas Copco also offers safety edges, berm attachments and bolt-on extensions for greater paving efficiency. The paver requires minimal maintenance, which safeguards the operator’s uptime. The multifunction display on both operator consoles shows any engine- and paver-related fault codes so operators and technicians can diagnose problems and choose corrective actions. Quick disconnect fittings and centrally located filters reduce scheduled service downtime because they are easy to access and replace. For more information, visit www.atlascopco.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) Atlas Copco’s F800T tracked paver is the newest addition to its highway class pavers and enhances productivity through operator comfort and high visibility.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • September 26, 2015 • Page 83

DePere, WI 920/532-0165

Schofield, WI 715/355-9898

Escanaba, MI 906/786-6920

Bridgeton, MO 314/291-1330

Columbia, MO 573/814-0083

Deforest, WI 608/842-4151

Eau Clair, WI 715/874-5400

Springfield, IL 217/789-7711

Cape Girardeau, MO 573/334-5252

Palmyra, MO 573/769-2056

Franksville, WI 262/835-2710

Carterville, IL 618/985-3399

Portage, IN 219/764-8080

100 Sheridan Ave. Des Moines, IA 50313 515/282-0404 800/555-1445

2525 16th Ave SW Cedar Rapids, IA 52406 319/363-9655 800/616-6615

1400 North Hwy 75 Sioux City, IA 51105 712/252-0538 800/633-9104

606 W. 10th Ave. Milan, IL 61264 309/787-1742 800/633-9114

Page 84 • September 26, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

ROLAND MACHINERY DePere WI 920/532-0165 Fax: 920/532-0526 Deforest WI 608/842-4151 Franksville WI 262/835-2710 Schofield WI 715/355-9898

Eau Claire, WI 715/874-5400 Escanaba MI 906/786-6920 Springfield, IL 217/789-7711 Marengo, IL 815/923-4966

Bolingbrook IL 630/739-7474 Carterville, IL 618/985-3399 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252

Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 Portage, IN 219/764-8080

BRANDEIS MACHINERY & SUPPLY COMPANY 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 • Fax: 502/499-3195 www.brandeismachinery.com Evansville, IN 812/425-4491 • Fax 812/425-1171 Corbin, KY 606/528-3700 • Fax 606/528-9014 Lexington, KY 859/259-3456 • Fax 859/254-0783

Stanville, KY 606/478-9201 • Fax 606/478-9208 Paducah, KY 270/444-8390 • Fax 270/575-4907 Indianapolis, IN 317/872-8410 • Fax 317/872-8417 Ft.Wayne, IN 260/489-4551 • Fax 260/489-1620

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 85

Page 86 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

EMPLOYMENT OPPORTUNITIES

Magnum Attachments Inc., a leading Distributor of Hydraulic Attachments, has an outstanding opportunity for a Regional District Manager for Midwestern United States. As a District Manager, the candidate will be responsible for managing sales of the Magnum Products through an authorized distribution network. The candidate will be responsible for maintaining growth within existing distribution as well as establishing new distribution channels. The candidate should have prior experience in wholesale distribution, be self motivated, PC proficient (Microsoft Office) and willing to travel 75% of the time. To learn more about our company and products please visit our website at www.magnumattachments.com. We offer a competitive remuneration package. Interested candidates may email their resume to tracy@magnumattachments.com or by fax to 877-640-2863.

What’s going on in YOUR COMPANY

We want to know! Give us a call.

Construction Equipment Guide

(800) 523-2200 or

FAX:

(215) 885-2910

JCB Brings Master Technician Program to North America JCB recently introduced the “master technician” program to all dealerships in the North American network. The master technician program is designed to continue to build the skills of JCB service technicians and recognize technicians that are at the top of their class. To be considered for the program, service personnel must be nominated by their dealership and pass an entry exam. Once those qualifications have been met, participants must pass a series of training programs and hands on skill challenges at 100 percent, as well as all distance learning classes, JCB systems efficiency testing, core product component testing and other service based tests to earn the designation of master technician. Rick Papalia, senior vice president of corporate operations of Northland JCB said, “We feel it is very important for any technician to understand all training opportunities that are available, and how they can continue to learn and grow with the company and advance their career. Not only does it provide an opportunity to expand their understanding of the product, but it helps them to The master technician program is designed to continue to build the skills of JCB keep up with rapidly changing technology, service technicians and recognize technicians that are at the top of their class. To some of which can be quite advanced. The be considered for the program, service personnel must be nominated by their deal- master tech program training structure will ership and pass an entry exam. also result in the highest levels of service

people possible. Most importantly, it will give our service technicians a means to recognize their accomplishments.” All those who successfully complete the master technician program earn the special master technician designation. They then compete annually in a competition where the best performing master technician in each of JCB’s 12 regions earns a special “master technician ring” to acknowledge their expertise. “Service technicians are often the unsung heroes of a dealership, yet they are vital to its success and support of the JCB brand, that’s why we are proud to introduce this prestigious program to honor those technicians who represent the best of the best in our North American dealer network," said Chris Giorgianni, JCB vice president of product support and government & defense. The 12 regional master technician competition winners will compete annually in a national master technician contest where the champion will win an all-expense paid trip to JCB’s global headquarters in the United Kingdom. For more information, visit www.jcbna.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 87

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $105 • Color $155

“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states .............................................................Call

Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us 19-20 TM

2006 Ditch Witch FX60 Vacuum Excavator, 800 gal spoils capacity, 200 gal water tank, 4 cylinder Cummins engine, 3251 hours ..............................................$32,500 19-20 EB Call Tania 614-443-9751 x237

2010 CAT 305C CR, EROPS, 2200 hours, Hyd. thumb, new tracks, Blade ............................$CALL Courts Machinery • 507/678-2752 20-21 PK

2012 Cat 252 B3 Skid Steer Loader, 551 Hrs, Serial/Stock Number: cat0252bctnk01493, 1-Owner, 2-Spd, Cab HVAC, power-tach .......................$34,500 Top Notch Equipment, Inc. 888-824-6559 19-20 PK

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 19-20 EB 614-395-4064

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. Call McLaren 888-492-4230 20-21 DH

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. Call McLaren 888-492-4230 20-21 DH

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. Call McLaren 888-492-4230 20-21 DH

2007 Ditch Witch XT1600, 221 Hrs, Tracks at 90%, Excellent Condition ................................$49,500 Call Tim 630-665-5600 20 JM

2003 Kubota KX121-3, 1871 Hrs (7/1/15), Cab w/AC, Medium Arm, Standard Track, 12” Rubber Tracks, Aux. Hyd, Blade, Angle Blade........$27,900 Call Scharber & Sons 763-428-4107 20-21 PK

2006 Cat XQ-80 Generator, 8146 Hrs ...........$19,000 Albert Medcalf or Marcela Newman 20-21 EB 502-456-4050

Doosan DL 220, 380 Hrs, 3 Yd Ride Control, Quick Coupler ..........................................................$135,000 Caleb Hinkkanen 800-456-4005 Ext. 143 19-20 PK

2013 Case SV250, s/n JAFSV250KDM469195, 530 Hrs, Cab w/AC, EH Controls, Hyd Coupler, 12x16.5 Tires, 78” Bkt ................................$38,500 20 JM Call Mark 630-739-7770

2010 Gehl V270 Vertical Lift Skid Loader, Like New, One Owner, 840 Hrs, OROPS, ISO Joystick Controls, 74” 22.8 Cu. Ft. HD Bkt, Custom Radiator Guard, Heat & Enclosed Cab, Super Nice Machine! ..$33,500 Call George 219-696-8911 20 JM

New Side-Entry JCB Skids. Priced to Move Call Don 316-943-9311

2007 JCB 1CX, 8’ Dig Depth, 2,263 Hrs ...................$21,000 Call Don 316-943-9311 20 JM

2001 Case 75XT, s/n JAF0318712, 1600 Hrs, ROPS, Hyd Coupler, 73” Bkt w/Teeth Bar, 12x16.5 Tires............................................................$16,000 20 JM Call Mark 630-739-7770

New 2015 Grove YB 4409XL, 8.5 Ton Carry Deck, Cummins Tier 4 , 30’ Main Boom, 6’ Jib, Enclosed Cab, Auxiliary Light Package,2-4 Wheel & Crab Steering, Outrigger Monitor System, Block, Ball, Cleveland Ohio Call Andy Forepaugh 216-316-1511 19-20 EB

2006 Takeuchi TL150, s/n 21503859, 2950 Hrs, Cab w/AC, Case Controls, 80” Smooth Bkt .$29,500 20 JM Call Mark 630-739-7770

20 JM

2009 Grove YB 7722XL, 22 Ton Carry Deck, Cummins Engine With Scrubber, Enclosed Cab, 67’ Main Boom, 17’ Jib, 4 Wheel Drive , Auxiliary Light Package, Block, Ball, Cleveland Ohio Call Andy Forepaugh 216-316-1511 19-20 EB

Page 88 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLASSIFIEDS ATTACHMENTS

Backhoe Loaders

2011 Winkle 40ELDSA, 40''

1999 John Deere 410E, Cab, 4 x 4, Ext-A-Hoe, Good condition, 6,400 hrs ..........$32,500.

Winkle Magnet w/ Chain & Connectors, Like New $7,780. Highway Equipment Company of Ohio 330-915-8391

BORING EQUIPMENT Boring

Road Builders Machinery 785-221-1747

Boring Tool, 50' Hose, Good condition ......................$2,220. Highway Equipment Company of Ohio

1974 CAT 977L, Crawler Loader, ROPS, 3 yd. Bucket, Working condition, 5,433 hrs .. ..................................$16,670.

Subscribe to CEG today...

330-915-8391

Wheel Loaders 2007 Komatsu WA200-5, 120 HP, 2.75 Yd bucket, Quick Coupler, Great condition, 6,600 hours ........................$79,500. Diesel Machinery Inc.

2008 Yanmar CBL40, PTO, 3 pt. Hitch, Backhoe, Great condition ............................CALL.

Crawler Loaders

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

Company of Ohio

605-336-0411

TRUCKS

Vermeer Sales & Service 641-628-2000

2011 Allied HH79, Hole Hog

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

Highway Equipment

LOADERS

Attachments - Misc.

Classified Rates:30 Words or Less for $35.00. Each Additional Word is $1.16. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion.

Would you like

YOUR COMPANY featured in Construction Equipment Guide?

If so, please contact us:

Get an edge on your competition! Construction Equipment Guide Midwest Edition subscribers are the best informed about construction news, construction equipment, sales, auctions, equipment prices, trends and changes in the industry and activities of its people. Call Toll Free! We now accept Visa, Mastercard & American Express!

SUBSCRIPTIONS:

CARDMEMBER’S NAME _________________________________________________________ COMPANY NAME _______________________________________________________________ STREET____________________________________ PHONE NO. ________________________ CITY ______________________________________STATE _______ ZIP ________________

Check Enclosed

Dump Trucks Moxy MT41 Articulated Dump Truck, s/n 810078, Good condition, 6,800 hrs ........$125,000.

330-915-8391

One Year $65

(within United States & Puerto Rico Only)

VISA

MASTERCARD

American Express

CARD NUMBER

470 Maryland Drive, Fort Washington, PA 19034

EXP. DATE (Mo./Yr.) SIGNATURE OF AUTHORIZED CARDHOLDER

TOLL FREE ®

1-800/523-2200 FAX 215/885-2910

Gibson Machinery LLC

470 Maryland Dr. • Ft. Washington, PA 19034 Email: circulation@cegltd.com

440-439-4000

Study Helps ‘Decision Makers’ COURT from page 1

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $105 • Color $155

2011 GapVac HV34, Blower, 3500 cfm @ 16”, Debr. Tank, 9-50 Yds, Bag Filters, 32 ea., 2009 John Deere 844K, s/n 624223, 10,205 Hrs, Cyclones, 4 ea., Approx. 40-50 Hrs ..Call for Price Cab, Heat & A/C.......................................$136,000 20-21 PK 20 JM Call Dennis 763-428-4322 Call David 219-696-5680

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $105 per ad, $50 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at

800/523-2200

cials determined the pipeline’s final route. But a three-judge panel of the appeals court said Sept. 14 that the certificate constituted a major governmental action, so state law requires the environmental impact statement be completed before that certificate is granted. No one disputed that the pipeline would be subject to environmental review, but the timing of a review was at issue. Traditionally, the certificate of need and routing permit proceedings for pipelines are conducted at the same time, but in this case, the commission conducted certificate of need proceedings first. The Friends of the Headwaters argued that conducting certificate of need proceedings before completing an environmental impact statement violated the Minnesota Environmental Policy Act. The appeals court agreed. The court also said that conducting an environmental impact statement early in the process ensures “decision-makers are fully informed regarding the environmental consequences of the pipeline, before determining whether there is a need for it. Moreover, completion of an EIS at the initial certificate of need stage seems particularly critical here because once a need is determined, the focus

will inevitably turn to where the pipeline should go, as opposed to whether it should be built at all.’’ Members of the Laborers International Union of America said they were disappointed that the ruling would further delay Minnesota regulators’ approval of Sandpiper and urged the Public Utilities Commission to act quickly. “We are deeply disappointed by the delays this decision will cause, which were completely unnecessary,’’ the union’s international representative, Dan Olson, said in a statement. He urged the commission to quickly get the process back on track. Calgary, Alberta-based Enbridge has argued that Sandpiper is needed to move the growing supply of North Dakota crude oil safely and efficiently to market. The company has said the project also would ease rail congestion and create approximately 1,500 construction jobs. But environmentalists and tribal groups said the risk of leaks is too high, including where the route would run through the headwaters of the Mississippi River. North Dakota regulators have already approved Sandpiper. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 89

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted I NEED A STEEL BODY DUMP TRAILER TO HAUL BROKEN CONCRETE AND ASPHALT. CONTACT: DENNIS GARBIS PHONE: 202-437-7299 FAX: 202-610-9151 EMAIL:DJGARBIS@ENVDES.COM –––––––––––––––––––––––––––––––– TATA XENON PICK UP CONTACT: BIJAY KUMAR PHONE: 943-901-1391 EMAIL: BIJAYAGRAWAL251@GMAIL.COM –––––––––––––––––––––––––––––––– PARTS | WE ARE LOOKING FOR THE FOLLOWING FOR A CAT 345BL II AGS02182: REBUILT OR RECONDITIONED HYDRAULIC PUMP, REBUILT OR RECONDITIONED PILOT PUMP AND FAIR TO GOOD TRACKS CONTACT: ROY FOLLICK PHONE: 519-686-1123 EMAIL: SALES@MARCEL EQUIPMENT.COM –––––––––––––––––––––––––––––––– MOBILE CRANE OF 100 TONS TO 120 TONS, LATEST YEAR: 2007 CONTACT: JAVIER GARZON PHONE: 593995201551 EMAIL: GARZNJAVIER@GMAIL.COM –––––––––––––––––––––––––––––––– CATERPILLAR WHEEL LOADERS 916, 926, 930, 950, 950B, 950E, 966D, 966E, 966F, 966FII. CONTACT: NAQIB KHAN PHONE: +92-333-3298751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– SKIDSTEER 773 BOBTACH | BOBCAT 773 OR EQUIVALENT BOB-TACH FOR BUCKET, FORKS, ETC. CONTACT: JOHN PHONE: 484-213-1896 EMAIL: JOHN@VISTASERVICESINC.COM –––––––––––––––––––––––––––––––– EUCLID R25/R35 OFF ROAD TRUCK | WORK READY, GOOD CONDITION NORTHEAST LOCATION. CONTACT: RICHARD PHONE: 603-828-6100 EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– NEW, USED OR SURPLUS STEEL PIPE CONTACT: BRUCE PHONE: 661-325-0398 FAX: 661-325-0269 EMAIL: BHAUPT@INDPS.COM –––––––––––––––––––––––––––––––– CONTRACTORS OFFERS ONLY, 950B, 950E, 966E, 966D, 966F & 966F2 | WE ALWAYS BUY FOR THE LISTED UNITS IF YOU HAVE ANY OF THEM PLEASE CONTACT ME. THANK YOU CONTACT: AYYAZ ALLAM EMAIL: PROJECTSHOUSE2015@ GMAIL.COM –––––––––––––––––––––––––––––––– BUCKET FOR 621E NONE QT CONTACT: TOM PHONE: 320-250-4650 EMAIL: TBLANKIMP@GMAIL.COM ––––––––––––––––––––––––––––––––

CAT MANUAL WHEEL LOADERS CAT 950, 926E, 936E, 950B, 950E, 966E, 966D, 966F & 966F-2. I AM ALWAYS LOOKING FOR THE LISTED UNITS IF YOU HAVE ANY OF THEM PLEASE CONTACT ME. THANK YOU CONTACT: IKRAM KHAN PHONE: +92-333-5555-360 EMAIL: IUK.IUKCO@GMAIL.COM –––––––––––––––––––––––––––––––– AERIAL BOOM FORK LIFT | CRAWLER AERIAL BOOM LIFT CONTACT: ROBERT PHONE: 620-786-5152 FAX: 620-793-5466 EMAIL:RR_ROOFING@HOTMAIL.COM –––––––––––––––––––––––––––––––– WACKER RT 820 REMOTE USED OR NEW, USA CONTACT: KEVIN PHONE: 856-692-0027 EMAIL: KEVIN@SANSALONE EXCAVATING.COM –––––––––––––––––––––––––––––––– EQUIPMENT MANUALS | WE BUY AND SELL AG AND CONSTRUCTION MANUALS, PARTS, OPERATOR & SERVICE MANUALS .BIG OR SMALL LOTS CONTACT: JOHN WHITNEY PHONE: 530-864-0771 EMAIL: WHITNEYJ65@YAHOO.COM –––––––––––––––––––––––––––––––– LOOKING FOR A REPLACEMENT ENGINE 2006 JD CT322 CONTACT: TONY PHONE: 843-599-7308 EMAIL: LITTSHERIFF@GMAIL.COM –––––––––––––––––––––––––––––––– BULLDOZER D8H DIRECT DRIVE | NEEDED BULLDOZER D8H «DIRECT DRIVE« A CLUTHCH FROM USER OR GENTLEMAN FARMER MUST BE GOOD GOOD CHEAP NO JUNK I PAY THE MARKET UNDER UNDER?? THANKS I NEED 3 CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL:JEANMAURICEBOUTIN@ VIDEOTRON.CA –––––––––––––––––––––––––––––––– KOMATSU SERVICE MANUAL | SERVICE MANUAL FOR KOMATSU PC200LC-7 FOR SERIAL NUMBER C50001 AND UP CONTACT: JOE PHONE: 724-944-5569 EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– GUARDRAIL POST DRIVER CONTACT: RANDY NORIEGA PHONE: 626-260-4429 FAX: 626-279-5510 EMAIL:DRGFENCEINCORPORATED@ GMAIL.COM –––––––––––––––––––––––––––––––– NEED A ENGINE HOOD FOR A 2001 KOMATSU 228USLC-3 # 20441 CONTACT: EDDIE GREEN PHONE: 864-327-3909 EMAIL: EDDIE@BRUCEEQUIPMENT.COM ––––––––––––––––––––––––––––––––

NEED CAT 988H WITH OR WITHOUT BLOCK HANDLER. I NEED COUNTER WEIGHT AND SHORT LIFT OR STANDARD LIFT AND IN AND AROUND $100,000 CONTACT: HEMAN UDESHI PHONE: 917623970400 EMAIL: HEMAN_UDESHI@ REDIFFMAIL.COM –––––––––––––––––––––––––––––––– FLEET TRUCK OR VAN | I AM LOOKING FOR A USED UTILITY WORK TRUCK WITH TOOL BOX, S & A RACK....95 TO 05 ALL ON CONDITION CONTACT: KEN PHONE: 925-687-8831 EMAIL: AB_DIVER@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– BULLDOZER D50 CONTACT: I KALYANKRSHNA PHONE: 900-011-0789 EMAIL:I.KALYANKRISHNAMRAJU@ GMAIL.COM –––––––––––––––––––––––––––––––– CAT WHEEL LOADER 950B/950E/966D/966E & 966F | WANT TO BUY CAT WHEEL LOADER 920, 930, 936E, 950, 950B, 950E, 966D, 966E, 966F-I, 980C, 980F CONTACT: AHMED PHONE: 0092-333 2376638 EMAIL: AHMED.ALMASOOUD@ GMAIL.COM –––––––––––––––––––––––––––––––– (2) USED 14 YARD DUMP TRUCKS | BUYER DO IN LOS ANGELES ON AUG 31ST. NEEDS (2) 14 YARD DUMP TRUCKS, (1) USED 6 TO 8 TON HIGHREACH FORK LIFT. CONCRETE SHEAR AND HYD HAMMER FOR 200 CLC JOHN DEERE. CASH BUYER. SHIP ALL OUT OF WILMINGTON PORT, CALIFORNIA. CONTACT: BOB LAMBERTON PHONE: 919-896-4782 FAX: 888-318-1663 EMAIL:NCNETWORKBOB@GMAIL.COM –––––––––––––––––––––––––––––––– LOW HOUR VALMET 385 MAXI HEAD CONTACT: LEROY BROECKER PHONE: 810-280-8183 EMAIL: LPB555@YAHOO.COM –––––––––––––––––––––––––––––––– 5BY16 3DECK INCLINEDOR HORZ SCREEN | GOOD OPERATING CONDITION WITH MOTOR CONTACT: JJ BRENNAN CONST EMAIL:BILLB@JJBRENNAN.COM –––––––––––––––––––––––––––––––– NEED RUNNING OR NON-RUNNING CAT WHEEL LOADERS 910, 920, 930, 936 & 936E, RUNNING CAT WHEEL LOADERS 950, 950B, 950E, 950F/F-II, 966C/E & 966F/F-II, CAT WHEEL LOADERS 970F, 980C, 980F, 988B & 972G CONTACT: RIZ PHONE: 832-528-0786 EMAIL: RIZ@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– BACKHOE COMPACT | KUBOTA L39, L45. 0R JOHN DEERE 110 CONTACT: RICK EMAIL: RICK@INTERWESTHOMES.COM ––––––––––––––––––––––––––––––––

NEED BULLDOZER D4G, D5G ENC CAB OR ROPS LGP OR STANDARD NOT ADVERTISED NO MACHINERY TRADER NO ROCK AND DIRT USER USA IF POSSIBLE LOW HOURS I NEED 3 OR 4 FAST CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL:JEANMAURICEBOUTIN@VIDEOT RON.CA –––––––––––––––––––––––––––––––– KOBELCO 330 EXCAVATOR ENGINE | COMPLETE OR SHORT BLOCK ENGINE MODEL 6D16TLE2 FOR KOBELCO 330 EXCAVATOR ENGINE CONTACT: RICHARD PHONE: 732-489-3266 FAX: 732-560-7313 EMAIL: AMIDIRT@AOL.COM –––––––––––––––––––––––––––––––– CAB CAT 826H | WE ARE LOOKING FOR A CAT 826H CAB FOR A LANDFILL COMPACTOR. CONTACT: JOHN STEWART PHONE: 519-686-1123 EMAIL: SALES@MARCELEQUIPMENT.COM –––––––––––––––––––––––––––––––– WANTED SNOW BLADE | LIGHT WT. BLADE FOR DRIVEWAY 6-8 FT CONTACT: DAVE PHONE: 7097002406 EMAIL: DAVEDAWE@MSN.COM –––––––––––––––––––––––––––––––– OILFIELD RIG UP TRUCK | MUST HAVE AT LEAST 20 BED WITH POLES AND WINCHES, CAPABLE OF TAIL ROLLING 50, 000 LBS. CONTACT: R.W. SIDWELL PHONE: 505-334-7800 FAX: 505-334-8740 EMAIL:RSIDWELL@RAISEBOR.COM –––––––––––––––––––––––––––––––– FORK LIFT | LOOKING FOR A 25, 000 LBS FORKLIFT IN GOOD CONDITION CONTACT: MIKE EMAIL: FISCHERMIKE1@AOL.COM –––––––––––––––––––––––––––––––– BELLY MOWER | THE MAIN FRAME THAT ATTACHES THIS ALAMO FLAIL MOWER TO FORD 5000 TRACTOR EMAIL: PETERSEMAN@HOTMAIL.COM –––––––––––––––––––––––––––––––– WE BUY EQUIPMENT MANUALS | WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS, BUT NOT INCLUDED TRUCKS AND VEHICLES. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL CONTACT: GRACE FRANCES PHONE: 2708492270 EMAIL: TRITOWN1@MSN.COM ––––––––––––––––––––––––––––––––

USED WHEEL LOADER WA3806 | WE ARE LOOKING USED WHEEL LOADER WA380-6 OR MORE SUPERIOR CAPACITY. CONTACT: MUHAMMAD IRFAN BUTT PHONE: 00923214331232 FAX: 00923004213128 EMAIL:AHINTERNATIONALPAKISTAN@G MAIL.COM –––––––––––––––––––––––––––––––– DROP HAMMER | TO ATTACH TO A 248 CAT SKID STEER CONTACT: MATTHEW WATKINS PHONE: 214-274-9528 EMAIL:MATTHEWWATKINS5872@GMAIL. COM –––––––––––––––––––––––––––––––– KOBELCO SK480LC DRIVE MOT | I NEED DRIVE MOTOR AND SEALS CONTACT: TOM CLAUSS PHONE: 215-624-2221 FAX: 215-331-5870 EMAIL:TSDREDGING@MSN.COM –––––––––––––––––––––––––––––––– MINI EXCAVATOR W/MOWER HEAD. CONTACT: JOHN HOUCHIN PHONE: 541-619-0695 EMAIL: JHOUCHIN@ENTEK.COM –––––––––––––––––––––––––––––––– BACKHOE LOADER | LOOKING FOR A BACKHOE LOADER TO WORK AROUND OUR PROPERTY CONTACT: JERRY COTE PHONE: 603-239-8846 EMAIL: COTEJOANNE03@GMAIL.COM –––––––––––––––––––––––––––––––– DUMP TRUCKS | WE ARE LOOKING FOR ANY MAJOR MANUFACTURER DUMP TRUCKS. TANDEM AND TRI AXLE. CHEVROLET, FORD, INTERNATIONAL, MACK, FREIGHTLINER, PETERBILT, VOLVO ETC. CONTACT: ALLAN WATSON PHONE: 336-789-1138 FAX: 336-823-6675 EMAIL: ALLAN@WATSON ENTERPRISESNC.COM –––––––––––––––––––––––––––––––– BLADE | WE ARE LOOKING FOR A LANDFILL U BLADE TO FIT A CAT 836G/H LANDFILL COMPACTOR. CONTACT: JOHN STEWART PHONE: 519-686-1123 EMAIL: SALES@ MARCELEQUIPMENT.COM –––––––––––––––––––––––––––––––– FORKLIFT DIESEL CONTACT: UMARZAMAN PHONE: 00971559012992 FAX: 0097165323306 EMAIL:UMARZAMAN113@YAHOO.COM –––––––––––––––––––––––––––––––– WET MACADAM MIX (CONTINUOUS MIX PLANT) | ROAD BASE MIXING PLANT (AGGREGATE, SAND AND WATER MIXING) CONTACT: SASIKUMAR PHONE: +971 55 6030051 EMAIL:SASI_KUMAR@ CHINACONSTRUCTION.AE ––––––––––––––––––––––––––––––––

VIBRATOR PILE DRIVER EXTRACTOR, MARK FOSTER, MODEL 4000, GOOD CONDITION, PRICE AROUND $6000, CONTACT: ANIS KALDES PHONE: 201-779-3243 EMAIL: ANISAZER@HOTMAIL.COM –––––––––––––––––––––––––––––––– POCKLIN 210 CONTACT: SUMERSINGHLOHACH PHONE: 09812084118 EMAIL:SUMERSINGHLOHACH@YAHOO. COM –––––––––––––––––––––––––––––––– SAA6D114 E3 KOMATSU ENGINE CONTACT: JIM PATTERSON EMAIL: JAMES.PATTERSON@ HYCROFTMINE.COM –––––––––––––––––––––––––––––––– EUCLID R25 OFF ROAD TRUCK | GOOD CONDITION, WORK READY. NORTHEAST LOCATION CONTACT: RICHARD PHONE: 603-828-6100 EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– NEEDED BULLDOZER D9R WITH RIPPER UNDER 9000 HOURS ON THE FRAME AND METER CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL:JEANMAURICEBOUTIN@ VIDEOTRON.CA –––––––––––––––––––––––––––––––– HN 110, 140, 80 HITACHI CONTACT: SVASSOCIATES PHONE: 903-048-9996 EMAIL: SVASSOCIATES6@GMAIL.COM –––––––––––––––––––––––––––––––– D6D OR D6C DOZER | NOT MORE THAN $15,000 CONTACT: ST.MARK OREBELA PHONE: +2348062120316 EMAIL: SOREBELA@HOTMAIL.CO.UK –––––––––––––––––––––––––––––––– CASE 580 LOADER BACKHOES | CASE MODEL 580 SK L SL M SM N SN LOADER BACKHOES CONTACT: FRANK HORAN PHONE: 800-33-GROFF FAX: 732-780-3618 EMAIL:FRANKHORAN@ GROFFTRACTOR.COM –––––––––––––––––––––––––––––––– DEERE 450C | I NEED A SET OF SWEEPS OR LIMB RISERS FOR A JOHN DEERE 450C WITH MOUNTING BRACKETS. I ALSO NEED A WINCH LEVER CONTROL CABLE. CONTACT: JOHN RATLIFF PHONE: 276-608-1507 FAX: 276-591-1239 EMAIL:CMESALES@BVU.NET –––––––––––––––––––––––––––––––– HOUGH PAYLOADER HF | 1947 TO 1954 HOUGH HF COMPLETE, PARTS OR SALVAGE. CONTACT: TIM ROONEY PHONE: (651) 433 2142 EMAIL: BROONEY@FRONTIERNET.NET ––––––––––––––––––––––––––––––––

Page 90 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 91

Challenges Include Soil Issues CORRIDOR from page 30

approximately six months to build a bridge.” RR secured the current contract in 2013 and expects to complete it this summer. The old U.S. 31 passes through La Paz and Lakeville, which are south of South Bend. “Once we shifted to the new alignment,” said Kulczar, “it acted like a bypass around them and the traffic is non-stop now. The only work that we are doing in urban areas is the north and south ends and we’re receiving a lot of cooperation to complete the construction. We’ve followed all the traffic guidelines and we hired State Barricade, a local company, to do all of our traffic maintenance.” The other major subcontractors brought on by RR are: R&R Excavating for earthwork and pipe work, LaPorte Construction to build four of the 19 bridges, Hawk Enterprises for traffic signals and signs, C-Tech for guardrail and fencing, and Bertsch-Frank & Associates for engineering. In total, RR excavated 2 million cu. yds. (1,529,109 cu m) of dirt for the total project and to build the roads and 19 bridges. It brought in 30,000 cu. yds. (22,936 cu m) of concrete, 125,000 tons (113,398 t) of hot mix asphalt (HMA), and 150,000 tons (136,077 t) of aggregate. A portable concrete plant was brought in on the first RR contract and it has been helping out ever since. The project provided the contractor with ample space for field offices, materials and equipment storage, and room for subcontractors to set up their operations. “R&R bought a piece of property adjacent to the project in the south end and dug a borrow pit near our concrete plant,” said Kulczar. Taylor notes that Walsh had a concrete plant on-site to do the concrete paving.

The majority of the work was done in single day shifts, except for last year when RR, in cooperation with INDOT, worked day and night for three weeks before the winter shutdown to ensure that traffic could use the new roads and infrastructure. The work season runs from late March to Thanksgiving, depending upon the temperature. “We fire up our asphalt plants in the middle of April,” says Kulczar. RR’s aggregate suppliers were helpful, especially with just-in-time delivery. On a daily basis, one can find 50 RR and subcontractor employees on-site, the equivalent of three or four crews. Rieth-Riley’s main shop and equipment yard, including a maintenance facility, is about eight miles from the job site. Kulczar had one onsite mechanic, Matt Carney, who was present during the work shift, and travels between the various sites. Some of the equipment and vehicles used by RR for the overall project include: a Vince Hagan plant, a 350 CMI paver, a Cure & Tyne CMI, a Town & Country rex belt placer, a Cat AP 1055D asphalt paver, two Cat CB 54 rollers, a Roadtek SB 2500B shuttle buggy, a Blaw-Knox widener 195, a Wirtgen 2000 mill, a Cat 14 grader, a JD 650 dozer widetrack, a Cat 962 loader, 15 off-road trucks, and a Komatsu 400 excavator. While no equipment was rented or purchased for the work, RR deals with the South Bend branch of McAllister Machinery. With the end of the project within sight, Kulczar noted that having done much of the overall work “helped us be more productive knowing what we were capable of doing. The experience that we have at RiethRiley enabled us to bid the projects and do them at cost. We have really good guys

and most of them of them have been with us a really long time. We don’t have a lot of turnover , which helps us a lot. We try to get our field guys involved in estimating from time-to-time to make sure that we’re looking at things properly. “We also offer some value-added engineering if it is going to save the project time and money,” he added. “We had a good line of communication with INDOT. It is a good parternship that is helping to get things done.” Kulczar is being assisted by Pat Plunkett, the project superintendent; Chris Weinkauf, the area manager, and Jamie Czarnecki, the general superintendent. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

TWO ONLINE AUCTIONS! Excess Equipment Auction Tuesday, September 29, 2015 Live Board Opens @ 10:00 AM (7) Application Equipment, (31) NH3 Equipment/Tool bars, (10) Dry Equipment, (24) Trailers, (9) Trucks, (18) Tractors/Harvest Equipment/Farm Implement, (16) Grain/Feed Equipment, (5) LP/ Petroleum Equipment, (8) Seed Equipment, (20) Loaders and Skid Steers, (5) Vehicles, (9) Liquid Equipment, (5) Liquid/Dry/Grain Trucks, (25) Construction Equipment, and (60+) misc. other items

Excess Equipment Auction Wednesday, September 30, 2015 Live Board Opens @ 10:00 AM (20) Application Equipment, (40) NH3 Equipment/Tool bars, (20) Dry Equipment, (12) Trailers, (8) Trucks, (8) Tractors/Harvest Equipment/Farm Implement, (34) Liquid Storage, (15) Running Gears, (4) Seed Equipment, (6) Loaders and Skid Steers, (10) Vehicles, (36) Liquid Equipment, (11) Liquid/Dry/Grain Trucks, and (45+) misc. other items

www.delpeterson.com 800-492-9090

Call today to get your items listed on our next DPA Online Auction! October 13th and October 27th For more information, contact

Del Peterson & Associates, National Auctioneers & Appraisers. 419 West Judy Drive • Fremont, NE 68025 (800) 492-9090 or (402) 721-4388 E-Mail: auction@delpeterson.com Web Site: www.delpeterson.com

I.R.A.Y. Companies is pleased to offer professional appraisal services. Our Certified Appraisal Services are laddered and can be customized to suit your individual needs. • Formal Appraisal: We fully inspect the equipment and provide a certified, professionally prepared document including pictures, serial numbers, and descriptions. The following non-certified options give you a market price at a valued rate. • Fax or E-mail Appraisal: You submit details of the equipment and we fax or e-mail you an appraisal report. • Desktop Appraisal: This appraisal is based on our phone conversation. No written appraisal is provided, only a value! Desktop appraisals start as low as $25 per unit! Call today for a free appraisal quote!

877-968-7230 www.iraymn.com

Page 92 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Atlantic City, NJ Sat., September 26, 2015 For: Late Model Construction Equipment & more • Parkersburg, WV Fri., October 2, 2015 For: Major Earthmoving & Pipeline Completion • Atlanta (Cummins), GA Fri., October 9, 2015 For: Major Multi Job Completion

• Salt Lake City, UT September 29, 2015 • St. Louis, MO September 29, 2015 • Albuquerque, NM September 30, 2015 • Raleigh-Durham, NC September 30, 2015 • Salt Lake City, UT September 30, 2015 • Chicago, IL October 1, 2015

• Syracuse, NY Sat., October 10, 2015 For: Late Model Rental Returns of Construction Equipment & more

• Wasilla, AK October 3, 2015

• Kansas City, KS Wed., October 14, 2015 For: Large Mining & Construction Equipment

• Denver, CO October 8, 2015

• Frankford, KY Fri., October 16, 2015 For: Complete Liquidation Rental Fleet • Queretaro, Mexico Fri., October 16, 2015 For: Late Model Equipment and more • Rochester, NY Sat., October 17, 2015 For: Very Large Rental Returns Auction. Construction Equipment & more • Orlando, FL Tues., October 20, 2015 For: Late Model Rental Fleet Equipment • Rochester, NY Fri., October 23, 2015 For: Job Completion of Two Local Jobs • Plymouth, MA Sat., October 24, 2015 For: Large Snow Equipment Auction • Houston, TX Thurs., October 29, 2015 For: Major Job Completion Auction • Manchester, NH Sat., October 31, 2015 For: Major Job Finishing Construction Equipment & more • Norwich, NY Sat., October 31, 2015 For: Aggregate Construction Equipment, Trucks & more • Somerset, PA Fri., November 6, 2015 For: Job Completion Coal & Mining Equipment • Somerset, PA Sat., November 7, 2015 For: Semi-Retirement Auction – Construction Equipment • Somerset, PA Sun., November 8, 2015 For: Beautiful 50 Car Collection • Houston, TX Tues., November 10, 2015 For: Rental Fleet Construction Equipment & more

• Columbus, OH October 6, 2015

• Manchester, NH October 8, 2015 • Pineville, KY October 15, 2015 • Chehalis, WA October 16, 2015 • Orlando, FL October 22, 2015 • North East, MD October 27, 2015 • El Paso, TX November 4, 2015 • Youngstown, OH November 4, 2015 • Houston, TX November 11-12, 2015 • Spokane, WA November 13, 2015 • Pittsburgh, PA November 17, 2015 • Phoenix, AZ November 18, 2015 • Williston, ND November 19, 2015 • Las Vegas, NV November 19, 2015 • Tipton, CA December 15, 2015 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Sacramento, CA Sat., October 10, 2015 For: Heavy Equipment & Commercial Truck Auction • Riverside, CA Sat., October 17, 2015 For: Heavy Equipment & Commercial Truck Auction

• Racine, WI Sat., November 14, 2015 For: Rental Return Auction

BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO

• Syracuse, NY Sun., November 15, 2015 For: Estate Sale

• ONLINE ONLY September 24 – October 1, 2015 For: End of Season Rental Sale

• Canastota, NY Sun., November 21, 2015 For: Late Model Rental Fleet Construction Equipment & more

• ONLINE ONLY October 1 - 8, 2015 For: Construction Auction

• Acton (Buffalo), MA Sat., November 22, 2015 For: Complete Collection of Toys, License Plate, Collectible Trucks & more • Toronto, Ontario, Canada Mon., November 23, 2015 For: Very, Very Large Late Model JD Agricultural Tractors & more • Buffalo, NY Sat., December 5, 2015 For: Large Late Model Construction & Aggregate Equipment & more • Albany (Greenwich), NY Tues., December 29, 2015 For: Large Rental Fleet Auction • Hagerstown, MD Wed., December 30, 2015 For: Late Model Construction Equipment • Kissimmee, FL January 30 – February 7, 2016 For: 23rd Annual Rental Return Auction RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Nashville, TN September 29, 2015

• ONLINE ONLY October 8 - 15, 2015 For: Construction Auction

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com COMMONWEALTH OF PA www.auctionsbygov.com 866-469-7383

HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493

• Cheswick, PA Tues., October 13, 2015 For: Fall Heavy Equipment Auction

• Marietta, PA Fri., October 23, 2015 For: Truck, Trailer & Equipment Auction

DARELL DUNKLE & ASSOCIATES AUCTIONEERS INC. www.dunkleauctioneers.com 800-433-6670

HILCO INDUSTRIAL, LLC www.hilcoind.com 877-37-HILCO

• Harrison, MI Thurs., October 22, 2015 For: Fall Contractors Auction

• ONLINE ONLY Sept. 21 – Oct.31, 2015 For: Late Model, Single Owner Heavy Haul Fleet

DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087

HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898

• Prospect, CT Sat., September 26, 2015 For: Construction Equipment

• Perkasie, PA Wed., September 30, 2015 For: Sealed Bid Auction – HVAC & Drilling

DEL PETERSON & ASSOCIATES www.delpeterson.com 800-492-9090

• Tamaqua, PA Thurs., November 12, 2015 For: South Tamaqua Coal Pockets, Inc. Complete Liquidation

• ONLINE ONLY Tues., September 29, 2015 For: Excess Equipment Auction • ONLINE ONLY Wed., September 30, 2015 For: Excess Equipment Auction DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277 • Cecil, OH Sat., October 17, 2015 For: 2nd Annual Fall NW Ohio Consignment Auction • Pendleton, IN Fri., December 11, 2015 For: 23rd Annual Snowball Auction EQUIFY AUCTIONS, LLC www.equifyauctions.com 888-535-8218 • Cisco, TX October 14-15, 2015 For: Heavy Machinery & Equipment Auction EQUIPMENT ROW.com www.equipmentrow.com 580-931-6156 • ONGOING ONLINE TIMED Construction Equipment, Trucks/ Trailers, Farm Equipment & Salvage. New items added daily! EURO AUCTIONS USA www.euroauctions.com 770-683-3883

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Foley, MN Fri., December 4, 2015 For: Heavy Equipment IronPlanet AUCTIONS www.IronPlanet.com 888-433-5426 • Des Moines, IA Wed., September 30, 2015 For: Live Unreserved Auction • Edmonton, Alberta Wed., October 21, 2015 For: Live Unreserved Auction • Wilkes-Barre/Scranton, PA Tues., October 27, 2015 For: Live Unreserved Auction • Houston, TX Tues., November 10, 2015 For: Unreserved Public Auction • Las Vegas, NV Fri., December 11, 2015 For: Live Unreserved Auction • Orlando, FL February 9-12, 2016 For: Live Unreserved Auction J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • Dallas, TX Thurs., October 15, 2015 For: Used Heavy Equipment

• Atlanta, GA Thurs., October 8, 2015 For: 100% Absolute Auction

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008

GEYER AUCTION COMPANIES www.geyerauctions.com 800-554-5005

• Bellingham, WA Wed., September 30, 2015 For: Piling Driving Equipment Auction

• ONLINE ONLY October 29 – November 5, 2015 For: Construction Auction

• Oaks, PA Sat., September 26, 2015 For: Absolute Construction Company Liquidation Auction

• Kenmore, WA Sat., October 3, 2015 For: Heavy Equipment, Contractors Equipment & Vehicles

BIG IRON www.bigiron.com 800-937-3558

HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252

• ONLINE ONLY September 30, 2015

• Livingston, LA November 11-12, 2015 For: 2 Day Winter Contractor’s Auction

• ONLINE ONLY October 15 - 22, 2015 For: Construction Auction • ONLINE ONLY October 22 - 29, 2015 For: Construction Auction

• ONLINE ONLY October 7, 2015 • ONLINE ONLY October 14, 2015 • ONLINE ONLY October 21, 2015 • ONLINE ONLY October 28, 2015

• Kenmore, WA Sat., December 5, 2015 For: Heavy Equipment & Contractors Auction JENNINGS AUCTION GROUP www.jenningsauction.com 717-268-0020

HERITAGE GLOBAL PARTNERS www.hgpauction.com 203-733-7191

• Harrisburg, PA Tues., October 6, 2015 For: Electrical Contractor Retirement Auction

• ONLINE ONLY September 26-30, 2015 For: Surplus Construction, Earth Moving & more

• ONLINE ONLY Tues., October 22, 2015 For: Electrical Contractor Retirement Auction

KEENAN AUCTION COMPANY www.keenanauction.com 207-885-5100

ROGERS REALTY & AUCTION COMPANY www.rogersauctiongroup.com 800-442-7906

• Chelsea, ME Thurs., October 22, 2015 For: Construction & Aggregate Equipment & more

• Lexington, NC Fri., October 2, 2015 For: Construction Equipment

MANASSE AUCTIONEERS www.manasseauctions.com 607-692-4540

ROLLER AUCTIONEERS www.rollerauction.com 866-515-1668

• Binghamton, NY Sat., September 26, 2015 For: Broome-Tioga County Annual Surplus Vehicle & Equipment Auction MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888 • Whitsett, NC Wed., October 28, 2015 For: One Owner Rental Fleet Reduction Auction MOTLEY’S AUCTION GROUP www.motleys.com 804-232-3300 • Goldsboro, NC Tues., October 6, 2015 For: Construction Equipment & Trucks • Gastonia, NC Sat., October 24, 2015 For: Utility Equipment & Trucks

• Denver, CO Wed., November 11, 2015 For: Heavy Construction & Contracting Equipment RTI AUCTIONS www.teitsworth.com 585-243-1563 • Rochester, NY Sat., October 3, 2015 For: Monroe County Area Municipal/Contractor Equipment Auction SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • Windsor Locks, CT Sat., October 3, 2015 For: Construction Equipment & more

NITKE AUCTIONS www.nitkeauctions.com 715-693-4447

SHETRON AUCTIONS www.shetronequipment.com 717-532-8828

• Wausau, WI October 30-31, 2015 For: Wisconsin Contractors 50th Annual Auction

• Shippensburg, PA Fri., October 30, 2015 For: Construction & Equipment Consignment Auction

PERFECTION INDUSTRIAL SALES www.perfectionindustrial.com 847-427-3333

• Shippensburg, PA Fri., December 18, 2015 For: Construction & Equipment Consignment Auction

• ONLINE ONLY Tues., October 6, 2015 For: Late Model Heavy Equipment PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com 860-642-4200 • North Franklin, CT September 25-26, 2015 For: Major Public Equipment & Truck Auction • Bethel, CT Fri., October 2, 2015 For: Complete Dispersal Auction – Bethel Sand & Gravel Co. • Columbus, OH Thurs., October 22, 2015 For: Major Heavy Equipment & Truck Auction • Lowell, MA Fri., November 6, 2015 For: 1 Owner Complete Dispersal Auction

STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • Wapello, IA Thurs., September 29, 2015 For: Retirement Auction • OCTOBER ONLINE Closes October 14, 2015 For: Ag, Construction, Trucks & more UTILITY AUCTIONS www.utilityauctions.net 302-530-9103 • Wilmington, DE Fri., October 23, 2015 For: Construction, Utility & Forestry Equipment

POWERS AUCTION SERVICE www.powersauction.com 608-439-5764

WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700

• Waukegan, IL Sat., October 10, 2015 For: Roger Belski Electric Estate Auction

• Princeton, MN Sat., December 5, 2015 For: Heavy Equipment

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Thurs., October 8, 2015 For: Construction Equipment • ONLINE ONLY Thurs., October 15, 2015 For: Rogers Tree & Construction Realignment Auction • ONLINE ONLY Tues., October 20, 2015 For: Truck & Trailer Auction

WOLFE INDUSTRIAL AUCTIONS, INC. www.wolfeauctions.com 800-443-9580 • York Springs, PA Fri., October 16, 2015 For: Southern PA Contractors Auction WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300

• ONLINE ONLY Thurs., October 22, 2015 For: Construction Equipment

• Phoenix, AZ Sat., October 10, 2015 For: Construction Equipment & more

QUARRICK EQUIPMENT & AUCTIONS INC. www.quarrickauction.com 724-439-1621

YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990

• Uniontown, PA Thurs., October 1, 2015 For: Farm & Construction Equipment

• Kissimmee, FL February 8-15, 2016 For: 42nd Annual 7 Day Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 93

INSPECTION DATE: FRIDAY OCTOBER 9, 2015 – 9:00 A.M. – 5:00 P.M. TRUCKS & TRAILERS: 2013 Chevrolet Express Van, Duramax, 4WD, Auto Trans, A/C, Backup Camera, 40,500 Miles. 2008 Hino 338 Bucket Truck, Diesel, A/C, Auto Trans, P/L, P/W, 82,000 Miles, Cruise, Air Brakes, W/ Al-Tec TA-50 2-Man Basket & Winch Attachment. 2006 Chevrolet T-7500 Cab Forward Truck, 12’ Alum Bed, 3,439 Actual Miles, Air Brakes, Exhaust Brake, Automatic Trans, Diesel, 10K Front Axle, 19K Rear Axle. 2006 Chevrolet T7500 Cab Forward Truck, Sauber 21’ Combination Flat Bed, Fold Down Sides, W/ Therman Curb Hyd Lift Gate, 3,300 Actual Miles, Automatic Transmission, A/C, Diesel, Hyd Brakes, Cruise Control, 10K Front Axle, 19K Rear Axle. 2000 Chevrolet W-4500 Cab Forward Service Truck, 70,500 Miles, Diesel, A/C, Auto Trans, Backup Camera, W/ Fiberglass Service Body. 2002 Chevrolet C-85 Crane Truck, Diesel, Air Brakes, P/L, P/W, 6 Spd Trans, 10,100 Actual Miles, W/ Hiab-085D Extendable Knuckle Boom Crane. 1999 Ford F-800 Series Digger Derrick Truck, Diesel, 6 Spd Trans, A/C, Air Brakes, 15,300 Miles, 12K Front Axle, 21K Rear Axle W/ Al-Tec D845A Digger Derrick – (6) Auger Bits Sold Separate. 2003 Sauber 1580 Tag Trailer, Tandem Dual, Pintal Hitch, Air Brakes, Ramps, GVWR-25,500. 2004 Sauber 1506B Reel Trailer. 2004 Bil-Jax ET-12,000 Hyd Lift Tag Trailer. VEHICLES: 2006 Chevrolet SS-R Pickup Truck, Leather, P/W, P/L, A/C, Auto Trans, 19,200 Miles – SHARP. 2011 Can-AM Spider 3 Wheel Motorcycle, 3,750 Miles – LIKE NEW. 2012 Chevrolet HHR Panel Van, Flex-Fuel, P/L, P/W, A/C, Auto Trans, 46,200 Miles – NICE. 2005 Kubota RTV 900 UTV, Diesel, 4X4, Cab, 200 Hrs – LIKE NEW. BACKHOES & SKID LOADERS & ATTACHMENTS: 2002 Kubota U35 Mini Excavator, Diesel, O-Rops, Dozer Blade, Hyd Thumb, 470 Hrs. 2003 Kubota K008-3 Mini Excavator, Diesel, O-Rops, Hyd Blade, Extendable Tracks, 382 Hrs. Kubota KXB500N Hyd Hammer. Kubota KXB300 Hyd Hammer. McMillan Hyd Auger Head W/ Bits. Vermeer S600TX WalkBehind Track Skid Loader, Diesel, Bucket, Pallet Forks, & Hyd Auger - LOW HOURS. TRENCHERS & DIRECTIONAL BORING EQUIPMENT: 2013 Vermeer LM42 Walk Behind Vibratory Plow, Diesel, 4WD, 14 Hrs. Vermeer D18 x 22 Navigator Directional Boring Machine, Diesel, 289 Hrs, 35 Drill Rods, W/ Several Heads & Sleeves. Vermeer V-100 Mighty Mole Boring System, 24 Hrs, Kubota Diesel, Vac Unit, W/ Thule Tandem Trailer. Vermeer ST750A Water

PLEASE DO NOT COME BEFORE INSPECTION DATE

Mud Pump, Portable W/ Kohler Gas. Vermeer D-6 Navigator Directional Boring Machine, 27 Drill Rods, Diesel, W/ Water Tank, 475 Hrs. AERIAL EQUIPMENT: 2011 Nifty TD-34TN Trac Manlift, Diesel, Extendable Tracks – LOW HOURS, LIKE NEW. 2015 JLG 3246 ES Up-Right Manlift, Electric – THIS UNIT HAS 1 HOUR. 2007 JLG 2030 ES Up-Right Manlift, 25 Hrs. GENERATORS: Kubota AV5500 Portable Generator, Gas, 125 Hrs. Honda 3000 Portable Generator. Honda EV2000 Portable Generator. Onan CMQD 7500 Portable Gen-Vertor. Onan Microlite 2500 LP Generator. Honda AV2500 Portable Generator. 2013 Generac Quiet Source Portable Generator, Natural Gas, Mitsubishi Engine. Kubota SQ3350 Portable Generator, Diesel, 321 Hrs. Kubota GV3190Q Portable Generator, Diesel, Trailer Mounted, 2930 Hrs. Generac 20KW All Weather Generator, Natural Gas. Kohler Portable Gen Set, Diesel, Trailer Mount. EQUIPMENT: Cat P20T-48A Electric Forklift W/ Charger. Solar Tec Arrow Board W/ Trailer. Core-Cut CC-2500 Cement Saw, 220 Electric – LIKE NEW. Yanmar C12R Track Dump Cart, Diesel, O-Rops, Rubber Tracks, Hyd Dump, 81 Hrs. Billy Goat Portable Vac Unit, Gas. Billy Goat Force Commercial WB Blower. Nu-Matic TTB665 Power Floor Scrubber. Master Portable Heater. Skid Loader 72” 4-In-1 Bucket. Skid Loader 84” Snow Bucket. SHOP & ELECTRICAL TOOLS & EQUIPMENT: Leica Wil LNA20 Laser Transit. DC Wire Express. Enerpac 2 Man Wiring Basket. MITY-M 3504 Portable Power Washer, Hot Water & Hose Reel. Stanley HP1 Compact Hyd Power Unit, 18 Hp, 30 Hrs. Stanley DS11 Concrete Saw, Hyd. Cutting Torch Set. Husqvarna K-3000 Electric Concrete Saw. Milwaukee Hammer Drill. Milwaukee Portable Band Saw. Milwaukee Jig Saw. (5) Werner Extension & Step Ladders. Milwaukee Chop Saw. Rockwell Portable Table Saw. Concrete Bull Float & Finishing Tools. Large Selection of Milwaukee Drills, Flashlights, Saws, W/ Chargers & Batteries. Pelsue Portable Fresh Air Unit. Porter Cable Shop Vac. Porter Shop Air Compressor. Stihl MS290 Chain Saw. Stihl MS200T Chain Saw. (2) Greenlee Step Bit Kits. Lenox Whole Saw Kit. Gas Lamp Tester. Pasar Wire Tracer. Greenlee 855 Pipe Bender. Greenlee 1732 Hyd Punch. Greenlee Portable Band Saw. Greenlee Gator Crimping Kit. Greenlee 859PBC Plug Set. Stout Portable Band Saw. Greenlee Gator EK22GL Battery Crimper. Greenlee Portable Band Saw. Greenlee Ultra Cable Feeder. NEW Greenlee 2 ½”

– 4” Pipe Bender. Greenlee Wheel Carriage System. Bending Gage W/ Cart. Greenlee Portable Pipe Bender. Snap-On Jumper Pack. Greenlee TUL-SUBAssembly. Greenlee 980 Hyd Power Pump. Greenlee Portable Fish Tape & Blower System. Greenlee Electric PVC Heater W/ Power Drive. (2) Greenlee 660 Quick Change Carbide Cutter Kits. Greenlee Wire Carrier. (2) Greenlee Hyd Punch Drivers. Ridged Micro CA-25 Inspection Camera. Highline 14” Glove Protectors. Milwaukee Angle Drill. Ryobi Router. 3M Dynatel Cable Locator. Milwaukee ½” Electric Impact. Aluminum Walk Planks. (2) Stanley Hyd Jack Hammers. Ryobi 10” Drill Press. 3M-2210 Locator. Milwaukee HD Hammer Drill. Wacker Magic Electric Hammer. Metal Sheer.Milwaukee Whole Houg Drill. Hotbin Heat Gun, LP. Impulse Cordless Nailer. Diamond Corebore Tool W/ Stand. (2) Burndy BCT500HS Connector Tools. Ridged RP-210 Heat Gun. Milwaukee Whole Saw. Rigid Micro Explorer. Senco DS202 Nailer. Dual Saw LS450. Several Battery Chargers. Lincoln Portable Grease Gun. L-Pack LED Wall Pack. Milwaukee Crimping Tool. Makita Impact & Driver Set. Cable Length Meter. Generac Transfer Switch. (8) Conduit & Pipe Stands. HG Superbeast Conduit Tester. Rigid Pipe Vice & Threader. Fluke Muti Meter. Thermal Dynamics Plasma Cutter. JP Nolan Breaker Box. Aero-Motive Electric Cord Reel. Hyd Hand Tamper. Large Metal Shop Cart. Hyd Concrete Saw. (18) New Extreme Electrical Boxes. Several Pipe Benders. Delta Lindsey Portable Air Unit #2. Milwaukee Electromagnetic Drill. Industrial Table Saw. Stihl Walk Behind Concrete Saw. (30) Sheets of Insulation. Dig Track Eclipse Locators. (6) 2” Submergible Water Pumps. Appliance Cart. Wester 500 Salt Spreader. Stihl TS400 Chop Saw. Panduit LS7 Label Maker. Several Wire Pullers. Several Hose Reels. Several Rolls of Rope. Dayton Shop Fan. (3) Waren Power Hand Winches. Heavy Duty Pallet Racking. Shelving Units. Woodhead Power Cord. LARGE SELECTION OF: Electrical Wire, Wire Cable, Misc Wire. Power Cords, Commercial Outside Lighting, Chains & Binders, Nuts, Bolts & Screws, Connector Sets, Ballast & Light Bulbs, Fuses, Clamps, Connectors, Anchors, Breakers, Electrical Boxes, Shovels, Rakes, & Spades, Light Bars, & Entry Doors. - THIS IS ONLY A PARTIAL LISTING OF TOOLS & EQUIPMENT: MANY MORE ITEMS DAY OF AUCTION! OUTDOOR & OFFICE: Master Forge Portable Grill & Sink. Large Metal Safe. Office Equipment & Supplies. Microwave. Refrigerator. Franklin Chef Ice Maker.

AUCTION TERMS: All Items to be paid the day of sale by: Cash, Check, or Credit Cards w/4% Convenience Fee. All Items to be settled for day of sale. $25 Doc Fee on all Titled Vehicles. All items are sold AS-IS, WHERE-IS with no warranties or guarantees of any kind implied or expressed. Announcements made the day of sale supersede any printed material. Powers Auction Service is not responsible for items once they are sold. 8% BUYERS PREMIUM & BANK LETTER OF GUARANTEE.

Page 94 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ritchie Bros. Auction Draws More Than 875 Participants

More than 185 equipment items and trucks were sold in the auction, including excavators, wheel loaders, cranes, truck tractors, trailers and more.

ore than 875 bidders participated online and in person at Ritchie Bros. Auctioneers’ multi-million dollar unreserved public equipment auction in Youngstown, Ohio, on Sept. 2.

Bidders came from 27 countries, including 46 U.S. states. Approximately 53 percent of the equipment was sold to out-of-state buyers, from as far away as Canada, Egypt and Jordan. Online bidders purchased

More than 875 bidders participated online and in person at Ritchie Bros. Auctioneers’ multi-million dollar unreserved public equipment auction in Youngstown, Ohio, on Sept. 2.

approximately 38 percent of the equipment sold (by dollar value). More than 185 equipment items and trucks were sold in the auction, including excavators, wheel loaders, cranes, truck trac-

Atlas Copco’s Peter Wallenberg ‘Water for All Fund’ Will Benefit Malawi Starting in October, Water for All will finance installing infrastructure and facilities that support clean water, sanitation and hygiene in about a dozen villages and communities in the southeastern Africa nation. About 28,000 residents will benefit from the project once it’s complete in October 2018. Water for All is working with the nonprofit ADRA on the project, which is financed through donations to the Peter Wallenberg Water for All Fund, where Atlas Copco is one of the major contributors. “Atlas Copco is delighted that the many contributions made to the Peter Wallenberg Water for All Fund will be turned into true life-changing benefits for thousands of people in Malawi,” said Ronnie Leten, Atlas Copco’s president and CEO. Water for All chose the Malawi project since it had previous success in the area. The region also is where Peter Wallenberg Sr. was active while working for Atlas Copco in Africa. Wallenberg was Atlas Copco’s managing director for the Federation of Rhodesia and Nyasaland — now Zimbabwe, Zambia and Malawi — starting in 1926, and he was chairman of Atlas Copco’s board of directors from 1974 to 1996. He worked at Atlas Copco for more than 61 years and passed away in January.

Atlas Copco’s main community engagement initiative is Water for All. Run by employees, the organization provides people in need with long-term access to clean drinking water. Through donations, boosted by the Atlas Copco Group, the nonprofit organization provided clean drinking water to more than 1.5 million people. Water for All programs sprung up in more than 40 countries with support projects all over the world. Atlas Copco employees founded it in Sweden 31 years ago, on Aug. 22, 1984. For more information about Water for All, visit www.water4all.org/us/. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Starting in October, Water for All will finance installing infrastructure and facilities that support clean water, sanitation and hygiene in about a dozen villages and communities in the southeastern Africa nation.

tors, trailers and more. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 95

KANSAS CITY, KANSAS

FRANKFORT, KENTUCKY

LARGE MINING & CONSTRUCTION JOB COMPLETION AUCTION

COMPLETE LIQUIDATION

CAT, JOHN DEERE, KOMATSU EQUIPMENT, HAUL TRUCKS & QUANTITY OF PARTS Anchor Trucking Service, Inc.

AUCTION

HILITES: 4 STRAIGHT FRAME HAUL TRUCKS: (4) Cat 773B, 6 CRAWLER TRACTORS: Cat D8L, Cat D7H, (3) Cat D6RLGP, Cat D6C, 5 RUBBER TIRED LOADERS: Cat 988F, (2) Cat 988B, Cat 988, Cat 980C, INTEGRATED TOOL CARRIER: Cat IT28G, 2 HYDRAULIC EXCAVATORS: Komatsu PC400LC, Cat 225, 6 TRACTOR LOADER BACKHOES: Cat 416B, JD 410, Case 780D, Case 680L, Case 680H, Case 680G, 6 LANDFILL COMPACTORS: (2) Cat 836, (2) Cat 826, (2) Rex 3-90C, 2 SKID STEERS: Cat 262B, Case 1845, 7 AIR COMPRESSORS: (7) 2011 Kaeser 210CFM, ATTACHMENTS: Motor Grader: JD Ripper, Skid Steers: Smooth, Snow & Mulch Buckets, 60in.- 78in. Buckets, New Versatech Grapple Buckets, New Versatech Hay Spears, New Pallet Forks, New Fork Frames, New Versatech Brush Grapples, New Stump Buckets, NEW SUPPORT EQUIPMENT: New Mustang LF88 Plate Compactor, New Mustang MP4800 2in Submersible Pump, New Mustang CV3500 Concrete Vibrator, New 4 Pack 10lb. Ratchet Straps, New 3pc. 14in. Premium Diamond Blades, New Huskie 11218SDS Hammer Drill, New Huskie B65 Jack Hammer, New Stiff Neck Pintle Hitch, New ½ in. Drive Air Impact Wrench, New 1/2in. Drive Aim Impact Wrench Kit, New 2in. x 50ft. Discharge Water Hose, New 3pc. Air Spray Gun Kit, New Auto Darkening Welding Helmet, New 3/8in. x 50ft. Automatic Air Hose Reel, New 5 Ton Digital 4ft. x 4ft. Platform Scale, New 3/4in. x 50ft. Jack Hammer Air Hose. Address: 8109 Kaw Drive Kansas City, KS 66106-1656.

WEDNESDAY, OCTOBER 14 @ 10:00 AM

ONE OF THE NICEST CAT, JOHN DEERE, DYNAPAC, JLG RENTAL FLEETS IN THE SOUTH.

THE BEST OF THE BEST! Haydon Rentals

AUCTION

4 CRANES: 2013 Grove RT765E, 2012 Grove RT540E, 20 HYD EXCAVATORS: 2012 Cat 336ELC, Cat 336DL, 2013 Cat 329ELC, 2011 Cat 324EL, Cat 320EL, Cat 315DL, 2014 Cat 312EL, (2) 2011 Cat 304DCR, MATERIAL HANDLER: 2008 Cat M325DLM, CRAWLER TRACTORS: Cat D6NLGP, Cat D6H, 2008 Cat D5KXL, 2008 Cat D4KXL, CRAWLER LOADERS: (2)Cat 963C, 11 LOADER BACKHOES: Unused CAT 420F Series II 4x4, (4) 2010-2009 Cat 420E, (5) 2008 Cat 416E, 20 SKID STEERS, VIBRATORY ROLLERS, SCISSOR LIFTS, 9 TELESCOPIC FORKLIFTS: (4) Cat TL943, (3) Cat TL642, 2 FORKLIFTS, MOTOR SCRAPER, 14 BOOM LIFTS: JLG 800A (4x4), (5) JLG 600S (4x4), WELDER, 7 LIGHT TOWERS, 2 TRK TRACTORS: 2012 Cat CT660S, 2005 KW W900L, DUMP, VACCUM TRK, SERVICE TRK, GOOSENECK TRAILERS, STEP DECK , TAGALONGS, AG TRACTOR, 6 RTVs, 9 GRAPPLE BUKS, 3 HAMMERS, 3 EXCAVATOR BUCKETS.

Address: 1330 KY-151, Frankfort, KY 40601.

FRIDAY, OCTOBER 16 @ 9:30 AM

Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY (Evenings) (315) 637-8912 www.lyonauction.com

Page 96 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Unreserved Unr reserrved p public ublic equipment auctions Spec Special ial limit limited-time ed-time fin financing ancing off offer! ffer! er! No p payments ayments ffor or 90 d days ays*

3 – 2008 Case 580M Series 3 4x4 | Manchester

2012 Caterpillar 950K | Manchester

2011 CA ATERPILLAR TERPILLAR 390DL | Chicag go

2012 Grove TMS900E | Columbus 2014 John Deere 772GP A AWD_4 WD_4250 | C Co olumbus

2009 Caterpillar 321 DLCR | Columbus

2007 Caterpillar 988H High gh Lifftt Pineville

FINTEC F542 | Chicag go

METSO LLT12 T1213 | Chicag go

1 of 4– Grove GMK5135 135 Ton 10x6x4 | Columbus

2010 Komatsu D475A 5EO Pineville

1 of 2– 2008 Case 821E Columbus

2007 Caterpillar 345CL | Pineville

51,000+ 51,000+ it items ems in 99+ auctions inc including luding Chicago, IL Wasilla, AK Columbus, OH Denver, CO Manchester, NH Pineville, K KY Y

Oct 1 Oct 3 Octt 6 Oct 8 Oct 8 Oct 15

Chehalis, WA El Paso, TX Orlando, FL Norrth East, MD Youngstown Houston, TX

Octt 16 O Oct 21 Octt 22 Oct 27 Novv 4 Nov 11–12

Au Auction ction Firm License # 444.000193, Au Auctioneer ctioneer Greg Greg M. Highsmith Highsmith # 441.000865, Auction Auction Firm # 2008000166, Auctioneer Auctioneer Frederick Frederick R. Vilsmeier VViilsmeier # 2004000137, Auctioneer Auctioneer Frederick Frederick R. VVilsmeier ilsmeier Lic # 6065, Au Auctioneer ctioneer Gr Gregory egory SS.. Fuqua Fuqua Lic # 3078, James L. VValentine alentine #RP 2706, Au Auctioneer, ctioneer, Auction Auction Company Company License # 1981, M Motor otor Ve Vehicle ehicle Dealer Dealer License #1539, Auctioneer Auctioneer James L. Valentine Valentine License # 1764, Au Auctioneer ctioneer John Korrey Korrey # 15943, Au Auction ction Business Business License #AB303, Auctioneer Auctioneer Trevor Trevor J. Moravec Moravec # AU3889, AU3889, Au Auction ction Firm # 2008000166, Au Auctioneer ctioneer Fr Frederick ederick R. VVilsmeier ilsmeier # 2004000137, Au Auctioneer ctioneer Greg Greg M. Highsmith Highsmith # 13285, Au Auction ction Company Company License # 1981, Motor Motor Vehicle Vehicle Dealer Dealer License #1539, Auction Auction Company Company License # AY00208L, AY00208L, Motor Motor Vehicle Vehicle De Dealer aler License # 1539, Ritchie Ritchie Bros. Bros. Au Auctioneers ctioneers (America) (America) Inc. Inc. Auction Auction Clerk Clerk License #225, Auctioneer Auctioneer Gregory Gregory M. Highsmith Highsmith # 701, *Limited-time *Limited-t ime offer offer fr from om Ritchie Ritchie Bros. Bros. Financial Financial Ser Services. vices. OAC. OAC. TTerms erms & conditions conditions apply. applyy. Se Seee rbauction.com/financing. rbauction.com/financing.

Spokane, WA WA Pittsburgh, P PA A Phoenix, AZ Williston, ND

Nov 13 Nov 17 Nov 18 Nov 19

Bid in person or online ▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public, free registration

Financing & leasing available

More items added daily

Up to 100% financing, with no moneyy down.

Call about selling: 1.800.211.3983

rbauction.com See full auction & equipment listing gs at rbauction.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 97

Unreserved public equipment auctions Complete dispersal for Straight Creek Coal Mining Inc.

2 of 3 – Caterpillar 740 6x6

2007 Caterpillar D9T

1 of 2 – 2008 Komatsu D155AX-6

1 of 2 – Caterpillar 980G Series II

1 of 2 – Caterpillar 980H

2008 Caterpillar 16M VHP

Pineville, KY

2007 Caterpillar 345CL

October 15 (Thursday) 9 am

Equipment includes

Bid in person or online

Location

Crawler tractors, wheel loaders, rock trucks, drills, articulated dump trucks, motor graders & much more.

▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public, free registration

10405 Hwy 221 Stoney Fork, KY 40988

More items added daily Call about selling: 615.453.4549

Financing & leasing available Up to 100% financing, with no money down.

See complete listings at Auctioneer Kevin L. Perry #RP 2607

rbauction.com

Page 98 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

IRAY Sale Features Excavators, Dozers, Skid Steers

RAY Auction held its fall sale on Sept. 11, in Foley, Minn. Among the heavy equipment up for bid were excavators, dozers and skid steers. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Ray Henry “The Colonel,” owner and head auctioneer of IRAY Auction, calls out the bids at another successful sale. Large crowds attended on a fantastic September day.

Wayne Rambo (L) of Rambo Construction and Salvage, Wheeler, Wis., with Don Schwalbach of Elderon Truck World, Whittenburg, Wis., bid on equipment like this John Deere 350D LC excavator.

This John Deere 450D excavator is one of many pieces of equipment up for auction. A nice selection of loaders gives buyers much to choose from at the IRAY auction.

This 2004 Rayco mini-dozer with mounted Brushcutter went for $25,000. Jim Branca of Milaca, Minn., says he wishes he had won this one.

Skid steers and track machines of all sizes are ready for sale.

Gerit Hanson (L) of Gerit Hanson Contracting Inc., Black Duck, Minn., and his equipment operations manager, Doug Rockstead, look over this Genie S85 equipment lift.

Laverne Berndt, a retired manufaturing engineer of Big Lake, Minn., is looking for a deal on equipment.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 99

THE BEST W WA AY TO BUY AND SELL USED EQUIPMENT. PERIOD. PERIOD.

GO GOVERNMENT VERNMENT SURPL SURPLUS US A AUCTION UCTION

C CONSTRUCTION ONSTRUCTION EQUIPMENT A AUCTION UCTION

TRUCK & TRAILER A AUCTION UCTION

Every Every W Wednesday ednesday

Every E very T Thursday hursday

HUMVEES | C CONSTRUCTION ONSTRUCTION EQUIPMENT TRUCK TRUCKS S | TRAILERS & MORE

EXCAVATORS | WHEEL L EXCAVATORS LOADERS OADERS | MO MOTOR TOR GRADERS | OFF-RO OFF-ROAD AD TRUCK TRUCKS S & MORE

ALL CLASSES CLASSES | D DAY AY C CABS ABS | SLEEPERS DUMP TRUCK S & MORE TRUCKS

Preview items at www.ironplanet.com

10/21/2015 Hosted by Finning

Hosted by Cashman

10/27/2015 Hosted by Cleveland Brothers

12/11/2015 2/9-2/12/2016 Hosted by Ring Power

11/10/2015 Hosted by Mustang Cat

quipment subject to 1999-20 IronPlanet, onPlanet, Inc. All Rights R Reserved. IronPlanet®, IronClad Assur surance® and Auctions you Equipment t change.. © 1999-2015 ou can trus trust® are registered service e marks mark of IronPlanet, onPlanet, Inc. All other marks mark and brands are the property operty of their rrespective owners.

Page 100 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Construction Work Reveals City’s Transportation Past DAVENPORT from page 1

The local German community was particularly active in creating local brews, she said. Drinking it was just as popular. Anderson said City Hall, conveniently located at the bottom of the trench, made tens of thousands of dollars a year off a local sin tax in those days. Harrison at the time was a “hot bed’’ of alcohol, she said. Today, a few taverns that line the street from the Hilltop Campus to downtown are a tame reminder of those days. One doesn’t have to get into the gutter to learn the history of this major Davenport thoroughfare. Each layer under the surface tells a story. Robert Musgrove, the city’s project manager, led the newspaper on a tour of the work site on a recent morning. He said that in addition to resurfacing Harrison, crews from Valley Construction of Rock Island are doing patch-repair work wherever they come upon “weak spots’’ of broken sewer pipe and concrete. To repair one 12-ft. (3.6 m) wide

patch near Central High School, crews dug down 6 ft. (1.8 m) to the subbase. Revealed were remnants of the city’s transportation past. After cutting through 7 to 8 in. (17.7 to 20 cm) of asphalt and concrete, they found the wooden ties and rails that used to carry the Harrison Street trolley in the 1920s. Digging a little deeper, they found the brick pavers on which horses drew carriages in the 1880s. Anderson called it a “testimonial’’ to the endurance of brick streets. “The tar they use doesn’t last more than a few years and you have to repair it again and again,’’ she said. “The old bricks are still there more than a century later. Too bad we don’t get the message that it might have been better to learn how to maintain brick streets.’’ Gravel predates brick construction. Anderson said it was not uncommon for inmates at the old Scott County Jail on 5th Street to spend their hard time breaking rocks and compacting them down into a gravel mix to be poured as a

BusinessCalendar

To view our Business Calendar online, go to www.constructionequipmentguide.com.

American Oil & Gas Events/Conferences 2015 Toll Free: 800/847-8301 or 316/788-6271 2015 CALENDAR OF EVENTS: September 27-30: IOGAWV Sports Weekend Lakeview Resort, Morgantown, WV (304) 344-9867 September 28-30: Society of Petroleum Engineers Annual Technical Conference & Exhibition George R. Brown Convention Center, Houston, TX (972) 9529393 September 28-29: Platts 10th Annual Pipeline Development and Expansion Conference Hilton Post Oak Hotel, Houston, TX (800) 752-8878 September 28-30: Interstate Oil & Gas Compact Commission Annual Conference Skirvin Hotel, Oklahoma City, OK (405) 525-3556 October 4-6: New Mexico Oil & Gas Association Annual meeting, Eldorado Hotel, Santa Fe. (505) 982-2568 October 5-7: IPAA Oil & Gas Investment Symposium, The Palace Hotel, San Francisco. (800) 433-2851 October 6-7: Arkansas Independent Producers & Royalty Owners Association Annual Meeting, Embassy Suites, Little Rock, AR. (501) 9750565 October 7-9: NOIA Fall Meeting, The Phoenician, Scottsdale, AZ. (202) 3476900 October 8: 19th Annual Oklahoma Oil & Gas Expo, State Fairgrounds, Oklahoma City. Sustaining Oklahoma’s Energy Resources. (405) 601-2190 October 8: Indiana Oil & Gas Association Annual Meeting, Tropicana Convention Center, Evansville, IN. (812) 838-8515 October 13-15: SPE Eastern Regional Meeting, Morgantown, W.V. (972) 9529393 October 14: IPAA/TIPRO Leaders in Industry Luncheon, Petroleum Club of Houston. (832) 233-5502 October 14-15: Permian Basin Petroleum Association Annual Meeting, Petroleum Museum and Petroleum Club, Midland. (432)684-6345 October 16: SOOGA Fall Sporting Clays Shoot, Hilltop Sports, Whipple, OH (740) 374-3203 October 18-20: OIPA Fall Conference, Big Cedar Lodge, Branson, MO (405) 942-2334 October 18-23: Society of Exploration Geophysicists 85th Annual Meeting & International Exhibition, New Orleans, (918) 497-5500 October 20:

3-in. (7.6 cm) aggregate on Harrison and other streets in the 1850s. “Arrest for public drunkenness would get you seven days on the rock pile,’’ Anderson said. Gravel wasn’t always easy for the horses to pull carriages through, especially in the rain. “They became quagmires of mud most of the time,’’ Anderson said. “When it rained, it got mucky and people just dealt with it.’’ In the 19th century, local residents were used to commuting on dirt roads. “Davenport was a frontier town,’’ Anderson said. “We had our 40-foot opera houses where we listened to Mendelssohn before we had paved streets.’’ Harrison Street actually was a ditch before it was a trench. When the original 36 blocks of Davenport were laid out in 1835, Harrison was actually called Ditch Street because of a ravine that it bordered, the Davenport Democrat and Leader reported on April 3, 1945.

IPAA Leaders in Industry Luncheon, Petroleum Club of Fort Worth, (800) 433-2851 October 21-22: IADC Human Factors Conference & Exhibition, Moody Gardens Hotel, Galveston, TX (713) 292-1945 October 21-22: Independent Oil & Gas Association of New York Annual Meeting, Buffalo Marriott Niagara, Amherst, N.Y. (716) 202-4688 October 23: Wildcatters’ Sporting Clays, Dallas Gun Club, Lewisville, TX, IPAA, 800/433-2851 Webinar: Converting Inquires to Sales & Rentals Date: October 22, 2015 Time: 10:00 AM to 1:00 PM (Central Time US & Canada) Event Type: Webinar Category: Educational Seminar Description: Every inquiry is an opportunity. It is an opportunity to impress and an opportunity to close a sale. It is important to take advantage of that opportunity. This dynamic and interactive webinar provides your inside sales team the why and how of providing exceptional customer service while behind the counter and on the phone. You will gain unique skills and tools that you can use to deliver exceptional customer service that go beyond ‘order-taking’. ICUEE – the EMO EXPO 2015 The International Construction and Utility Equipment Exposition DATE: September 29, 2015 to October 1, 2015 Venue: Kentucky Exposition Center, Louisville, United States ICUEE, also known as The Demo Expo, is the largest event in North America for utilities and utility contractors seeking new equipment, technologies, and best practices for construction and rehabilitation projects. With 25 acres of exhibits to explore, attendees can comparison shop more than 800 suppliers through equipment test drives and interactive product demonstrations. At ICUEE 2015, attendees will have an opportunity to: . Visit with more than 850 leading manufacturers. . Explore the latest utility products and innovations. . Operate construction and utility equipment in job-like conditions. . “Test run” the products specific to your operation’s needs in a variety of ways, including: . Specialized exhibit pavilions for fleet management, safety and green utility. . A 2-mile Ride & Drive test track (for on-road equipment and technologies). . An Indoor Demo Stage . Extensive in-booth exhibitor product demos . Learn from the pros! . Attend sessions to help you better understand the latest technologies and issues that are impacting the way you do business. . Talk directly to technical experts and equipment designers who can answer your industry-specific questions. Customer service: ICUEE’s customer service team is here to assist you! Hours: 8 AM to 4:30 PM (Central Time, USA) PHONE: US and Canada: Toll Free: 800/867-6060; email: info@icuee.com OHIO FORESTRY ASSOCIATION PRESENTS “THE ORIGINAL AMERICAN FORESTRY SHOW” OFFICIAL PAUL BUNYAN SHOW DATES: OCTOBER 2-4, 2015 TIME: 8:00 AM TO 5:00 PM FRIDAY AND SATURDAY 9:00 AM TO 3:00 PM SUNDAY PLACE: GUERNSEY COUNTY FAIRGROUNDS 335 OLD NATIONAL ROAD OLD WASHINGTON (CAMBRIDGE), OH 43768 ADMISSION PRICES: $8 – ADULTS – $4 - SENIORS (60 & OVER) & KIDS

In the 1830s, Ditch Street was considered the eastern boundary of the new town. In 1842, the name was changed to Harrison Street in honor of President William Henry Harrison. Horse-drawn trollies came in the 1870s, and after a brief period the horsepower gave way to steam. Anderson said it took an enormous amount of juice to push the trollies uphill. Passengers might find themselves covered in soot at the top of the hill, she added. By the 1890s, electric trolley lines took over and lasted until after World War I. Underneath the old tracks are sewer pipes made out of brick. Crews were busy Sept. 3 repairing a broken line at 7th Street, where raw sewage gushed out of a 36-in. (91 cm) brick pipe. City inspector Rick Rizzo said the crew had to dig 15 ft. (4.5 m) down to fix the pipe, which dates back to the 1890s. To fix it, Musgrove said workers used a concrete collar to fasten a pipe made of PVC to the old one

(7 - 12) CHILDREN 6 & UNDER – FREE!!! NO PETS ALLOWED! THERE WILL BE FORESTRY EQUIPMENT RUNNING LIVE THROUGHOUT THE GROUNDS AND IT IS A VERY LOUD AND SCARY PLACE FOR PETS! PLEASE LEAVE YOUR PET AT HOME! NO UNAUTHORIZED VEHICLES, ATV’S OR PERSONAL GOLF CARTS ALLOWED ON SHOW GROUNDS. SHOW INFORMATION INCLUDES: ACTIVITIES, COMPETITIONS, EXHIBITORS, LODGING/DINING, EXHIBITING INFORMATION AND VOLUNTEERS. PAUL BUNYAN SHOW IS A THREE-DAY EVENT. THE MAIN AIM OF THE SHOW IS TO PROVIDE ACCESS TO KNOWLEDGE AND TECHNOLOGY THAT WILL ENHANCE THE QUALITY OF LIFE OF INDIVIDUALS, FAMILIES, INDUSTRIES AND COMPANIES. THE EVENT IS ORGANIZED BY THE OHIO FORESTRY ASSOCIATION, INC., THAT SUPPORTS THE FOREST RESOURCES AND IMPROVEMENT OF BUSINESS CONDITIONS OF ITS MEMBERS. PAUL BUNYAN SHOW IS BASED ON THE RESEARCHES OF DIFFERENT INDIVIDUALS AND COMPANIES. FOR MORE INFORMATION, PLEASE CONTACT OHIO FORESTRY ASSOCIATION. PHONE: 614/497-9580, FAX: 614/497-9581, EMAIL: INFO@OHIOFOREST.ORG ASA CHICAGO presents: “MEET THE GCs NIGHT” on TUESDAY, OCTOBER 6, 2015 A Subcontractors Networking Opportunity – ASA Chicago, an association representing subcontractors of all construction trades, announces its ninth annual “Meet the GCs (general contractors) Night”. This year’s event takes place Tuesday, October 6, 2015, at Venuti’s in Addison, Illinois. “Meet the GCs Night” provides subcontractor members of ASA Chicago with an opportunity to speak directly to representatives of over 30 of the most prestigious Chicago area general contracting firms. Last year over 700 attendees were able to network with representatives of many general contracting firms. It is the largest event of its kind for the association, which has been serving the Chicago subcontracting community for 48 years. ASA Chicago is the only construction trade association devoted to business issues affecting all subcontractors and specialty trade subcontractors. New for 2015: An exclusive reception will be held for non-members. Nonmembers will meet representatives from six major General Contractors and enjoy appetizers and cocktails. Attendees will learn more about ASA Chicago and receive an opportunity to attend the “main event”. About ASA Chicago: ASA Chicago, established forty-eight years ago, has the experience to support subcontractors and its affiliates. ASA Chicago is the way subcontractors network in the Chicagoland construction industry. To learn more, please visit us on the web at www.asachicago.org. For more information on this event, contact Virginia McFarland at Phone: 847/827-8336 / Fax: 847/827-8359 / ginny@asachicago.org. N.Y.S. HIGHWAY & PUBLIC WORKS EXPO Produced by SUPERINTENDENT’S PROFILE N.Y.S. Superintendent’s Profile & Product-Service Directory DATE: WEDNESDAY – OCTOBER 21, 2015 TIME: 8:30 AM to 3:00 PM PLACE: CENTER OF PROGRESS BUILDING N.Y.S. FAIRGROUNDS/SYRACUSE, NY For more information on this event, please contact Profile Publications, N.Y.S. Superintendent’s Profile: NAME: Bob Buckley TELEPHONE: 800/992-7116 / 518/863-4100 FAX: 518/863-7100 EMAIL: bbuckley@cegltd.com GIE+EXPO: The Green Industry & Equipment Expo The Largest Show for Your Industry – GIE+EXPO 2015 Dealer Day: October 21, 2015 All Attendees: October 22-23, 2015 Tradeshow Location: Kentucky Exposition Center 937 Phillips Lane Louisville, Kentucky 40209 Three Nights of Free Concerts! Two tradeshows – GIE+EXPO and

made of brick. The city of Davenport’s sanitary and storm sewer office had sent remote control cameras out crawling though sewer lines under Harrison to find cracks and other weak spots, like the one at 7th. The damage deep down is more than the city had anticipated, Musgrove said. “We’re taking out more brick here than we thought,’’ he said. He said the additional repairs will not affect the overall cost of the project, which is estimated at $3 million, including the resurfacing and sewer repair. The project’s end date is Dec. 28. Davenport Public Works Director Mike Clarke said he wonders what else crews will find underneath the surface. Anderson said she would not be surprised if they found a few beer bottles under there. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Hardscape North America – co-located in one central location, provide your No. 1 opportunity to see what your industry is buzzing about. The 19-acre Outdoor Demonstration Area, within easy walking distance of the indoor exhibits, and the New Products Showcase make these prestigious shows an exceptionally efficient, productive marketplace. See outdoor power equipment, along with products for landscapes, gardens, outdoor leisure, hardscapes and light construction. Future Show Dates: October 19-21, 2016 – October 18-20, 2017 – October 17-19, 2018 For more information, contact by Phone: (800) 558-8767 or (812) 9499200 and Fax: (812) 949-9600, Email: info@gie-expo.com PIOGA (Pennsylvania Independent Oil & Gas Association) Eastern Oil & Gas Conference & Trade Show DATES: OCTOBER 27 – 28, 2015 PLACE: Monroeville Convention Center in Monroeville, PA The time of year is new, but the venue will be familiar to most of our exhibitors. The Monroeville Convention Center has lots to offer: a convenient location, free parking, a good layout and reasonable lodging costs. We’re even rolling back our booth prices to 2013 levels! We hope you will take the opportunity to again participate in the region’s longest-running trade show organized by the exploration and production industry for the E&P industry. For more information, contact The Pennsylvania Independent Oil and Gas Association, 115 VIP Drive, Suite 210, Northridge Office Plaza II, Wexford, PA 15090-7906. PHONE (724) 933-7306; FAX (724) 933-7310. OSHA for Oil and Gas: Regulations, Auditing and Enforcement DATE: OCTOBER 29, 2015 PLACE: Houston, Texas In OSHA for Oil and Gas, we review safety auditing best practices, employee and contractor safety as well as the Occupational Safety and Health Act’s (OSHA’s) regulations and enforcement initiatives. There is a series of rulemaking proceedings currently underway (e.g., silica, electronic recordkeeping, and reporting) as well as soon-expected rulemaking (e.g., fall protection, clarification of recordkeeping retention requirements, and combustible dust) and RFIs that potentially affect the industry (e.g., process safety management). There are also a number of OSHA initiatives outside of the rulemaking context, such as National Emphasis Programs and Awareness Campaigns. Given the high risk of oil and gas work, the diversity of projects, the remote nature of the operations, and the fact that many employees and supervisors are new to this industry, there is a critical need to expand safety auditing to ensure best practices across all sectors of the supply chain, from upstream drillers, well servicing teams, and track crews at the well site to pipeline construction crews and operators and refinery workers. The goal of this course is to provide guidance to oil and gas industry, with an emphasis on health and safety regulations, compliance, and enforcement trends. This Course is Useful For: . Project managers . HSE professionals . Regulatory professionals . Individuals new to oil and gas regulatory investigations & OSHA . Energy lawyers . Oil & gas engineers . In-house counsel . Risk managers For more information on this course, contact Kinetic at (720) 491-1173; Website: http://becomekinetic.com. Email: educate@becomekinetic.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 101

ANNUAL FALL CONTRACTORS AUCTION

Thur., October 22, 2015 10:00 AM Now Accepting Quality Equipment!

• Heavy Equipment • Logging Equipment • Trucks & Trailers • Utility Trucks & More! Located 110 Miles North of Lansing off US-127. Take 2nd Harrison Exit 176, then East on Arnold Lake Rd. Follow Auction Signs.

www.dunkleauctioneers.com E-Mail: info@dunkleauctioneers.com Darell Dunkle 989-429-5336 Office: 800-433-6670

The “It’s Only Another Beer” Black and Tan 8 oz. pilsner lager 8 oz. stout lager 1 frosty mug 1 icy road 1 pick-up truck 1 10-hour day 1 tired worker A few rounds with the guys Mix ingredients. Add 1 totalled vehicle. Never underestimate ‘just a few.’ Buzzed driving is drunk driving.

Page 102 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com AIM ATTACHMENTS ..............................................................................................36 ALEX LYON & SON INC KANSAS CITY KS / FRANFORD KY ..........................................................95 ALEX PARIS CONTRACTING CO INC....................................................................9 ALTORFER CAT ....................................................................................................20 AMERICAN STATE EQUIPMENT ............................................................................7 ARING EQUIPMENT CO INC ................................................................................21 ASC CONSTRUCTION EQUIP USA ................................................................10,11 ASPEN EQUIPMENT ............................................................................................39 ATI CORPORATION/LEVEL BEST ........................................................................32 ATLAS COPCO ......................................................................................................36 BARGAINS ........................................................................................................87,88 BELL TRUCKS AMERICA INC ..............................................................................63 BID SPOTTER......................................................................................................101 BLANCHARD MACHINERY INC............................................................................28 BOBCAT CO ..........................................................................................................52 BOMAG AMERICA'S INC ......................................................................................75 BOSS PRODUCTS ................................................................................................40 BUTLER MACHINERY ..........................................................................................36 CASE CONSTRUCTION........................................................................................48 CATERPILLAR GLOBAL CONSTRUCTION ..........................................................31 CEG SCALE MODELS ..........................................................................................34 CK POWER ............................................................................................................33 CLASSIFIEDS ........................................................................................................88 CONSTRUCTION EQUIPMENT GUIDE CEG VALUE ADDED ..................................................................................85 AUCTION TRIPLE PLAY ............................................................................90 CRAWLER LEADERS PROMO ..................................................................42 NYS HIGHWAY & PUBLIC WORKS EXPO ................................................24 WANTED......................................................................................................89 CUSTOM MADE PRODUCTS ..............................................................................35 DARELL DUNKELL & ASSOC ............................................................................101 DEL PETERSON AUCTIONEERS ........................................................................91 EFFICIENCY PRODUCTIONS ..............................................................................33 EMPLOYMENT OPPORTUNITIES ........................................................................86 ERB EQUIPMENT..................................................................................................15 FABICK CAT ............................................................................................................2 FINKBINER EQUIPMENT CO..................................................................................7 FLANGE LOCK ......................................................................................................80 FOLEY EQUIPMENT CO ......................................................................................17 FURY MOTORS ....................................................................................................25 GEHL ..................................................................................................................103 GOMACO CORP....................................................................................................76 GROUSER PRODUCTS ........................................................................................40 HINIKER NORTHEAST..........................................................................................43 HITACHI MFG ........................................................................................................50 HOLLAND EQUIPMENT SERVICES ....................................................................33 HOWELL TRACTOR & EQUIPMENT CO............................................................104 HYDREMA U S INC ..............................................................................................65

HYUNDAI CONSTRUCTION EQUIPMENT ..........................................................45 ILLINOIS TRUCK & EQUIPMENT ..........................................................................3 IRAY AUCTION ......................................................................................................91 IRONPLANET ........................................................................................................99 JCB INC..................................................................................................................68 JFW EQUIPMENT INC ..........................................................................................80 JJ SCHECKEL........................................................................................................27 JOHN DEERE ........................................................................................................57 JOHN DEERE SKID STEER..................................................................................41 KOMATSU AMERICA CORP..................................................................................60 KUBOTA SVL ........................................................................................................67 LANO EQUIPMENT INC ........................................................................................16 LEEBOY ................................................................................................................78 LINK-BELT EXCAVATORS ....................................................................................44 MAGNUM ATTACHMENTS ....................................................................................86 MAULDIN PAVING PRODUCTS ............................................................................77 MCCANN INDUSTRIES INC....................................................................................6 MENTOR DYNAMICS LTD ....................................................................................64 MOROOKA USA ....................................................................................................64 NITKE SALES INC WAUSAU WI ..............................................................................................101 NORTRAX-MIDWEST ............................................................................................86 NPK CONSTRUCTION EQUIPMENT INC ............................................................29 NUSS GROUP ........................................................................................................8 PATTEN TRACTOR & EQUIPMENT CO ..............................................................23 PERFECTION INDUSTRIAL ..................................................................................91 POWERS AUCTION & EQUIPMENT SALE WAUKAGAN IL ............................................................................................93 RAYCO ..................................................................................................................32 RITCHIE BROS. AUCTIONEERS PINEVILLE KY ............................................................................................97 UNRESERVED PUBLIC AUCTION ............................................................96 ROAD BUILDERS MACHINERY ........................................................................6,13 ROADTEC ..............................................................................................................73 ROLAND MACHINERY INC ....................................................................................5 ROSCO MFG CO ..................................................................................................83 SAKAI AMERICA INC ............................................................................................81 SOUTHEASTERN EQUIPMENT CO ....................................................................28 STAR EQUIPMENT LTD ..........................................................................................6 TAKEUCHI..............................................................................................................46 THE VICTOR L PHILLIPS CO ..............................................................................35 THUNDERCREEK..................................................................................................20 TRI-STATE BOBCAT ..............................................................................................19 VOLVO COMPACTION ..........................................................................................81 VOLVO CONSTRUCTION EQUIPMENT ..............................................................59 WACKER NEUSON CORP ....................................................................................49 WEST SIDE TRACTOR SALES ............................................................................35 WIRTGEN AMERICA ............................................................................................84 YANMAR AMERICA ..............................................................................................66

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 26, 2015 • Page 103

Alta Equipment Company 28775 Beck Rd. Wixom, MI 48393 248-449-6700 Fax: 248-449-6701 www.altaequipment.com 2470 W. Columbia Ave. Battle Creek, MI 49015 269-965-1269 Fax: 269-965-1881

RAISE

GIVE ‘EM A

DL SERIES TELESCOPIC HANDLERS

8840 Byron Commerce SW Byron Center, MI 49315 616-878-7450 Fax: 616-878-7650 4716 Talon Ct. S.E. Kentwood, MI 49512 616-698-2960 Fax: 616-698-2901

HEAVY-DUTY BOOMS –

6327 Jomar Ct. Lansing, MI 48917 517-272-5033 Fax: 517-272-7257 5920 Grand Haven Rd. Muskegon, MI 49441 231-798-9754 Fax: 231-798-9387

POWERFUL –

28855 Smith Rd. Romulus, MI 48174 734-641-8238 Fax: 734-641-8334

ENHANCED VISIBILITY –

1524 Champagne Dr. Saginaw, MI 48604 989-752-9400 Fax: 989-752-9834

MORE FLEXIBILITY –

7500 E. 15 Mile Rd. Sterling Hts., MI 48312 586-977-6000 Fax: 586-977-6099 9433 Riley St. Zeeland, MI 49464 616-748-4108 Fax: 616-748-4120 476 US 31 South Traverse City, MI 49685 231-943-3700 Fax: 231-943-8110 56195 Pontiac Trail New Hudson, MI 48165 248-356-5200 Fax: 248-356-2029

Elder Ag and Turf East Palestine, OH 330-426-2166

Custom Truck & Equipment 7701 Highway 24 Kansas City, MO 64125 800-861-1065 www.cte-equipment.com

'HDOHU ,PSULQW

Company Wrench

4805 Scooby Ln. NW Carroll, OH 43112 866-262-4181 740-654-5304 Fax: 740-687-9130

Cincinnati Branch 3120 S. Verity Pkwy. Middletown, OH 45044 513-649-8105 Fax: 513-649-8107

Cleveland Branch 525 Golden Oak Pkwy. Oakwood Village, OH 44146 440-439-4567 Fax: 440-439-1789

1554 Old Frankfort Pike Lexington, KY 40504 866-262-4181 Fax: 859-254-1107

Page 104 • September 26, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE