Midwest 21 2014 by Construction Equipment Guide

Published Nationally

$3.00

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 4

Midwest Edition

www.constructionequipmentguide.com

October 11, 2014 • Vol. IXX • No. 21 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910

Inside

Construction Firms Add Jobs in 36 States

Wilson Celebrates 125 Years of Business...12

Quar ry Quest B ring s Fami ly Fun. .. 24

see PIER page 106

see JOBS page 108

There are about 25 construction workers on the job daily, but while construction is occurring near heavily congested areas, there has been little interruption in traffic for city commuters.

Navy Pier Work Progresses By Lori Tobias CEG CORRESPONDENT

I Make Amer ica To ur Sto ps at Case ... 34

On Chicago’s wish list for at least a decade, the Navy Pier Flyover is an elevated pathway along the 18.5 mi. (29.8 km) Lakefront Trail designed to provide a safer route for pedestrians and bikers who now share it with vehicles in places Sen. Dick Durbin, D-Ill., described as “You take your

Construction firms added jobs in 36 states between August 2013 and August 2014 while construction employment increased in 28 states between July and August, according to an analysis of Labor Department data by the Associated General Contractors of America. Association officials noted that construction activity continues to spread across most of the nation even as employment gains remain uneven by month and state. “The number of states with increases in construction employment over the last 12 months moderated in August but remained strongly positive as construction activity continues to spread across most of the nation,” said Ken Simonson, the association’s chief economist. “While most states remain far below pre-recession peak employment levels, more states are approaching previous highs and more contractors have been reporting difficulty in hiring qualified workers. These trends are likely to intensify if the recovery in construction continues.” Florida added more new construction jobs (43,500 jobs, 11.8 percent) between August 2013 and August 2014. Other states adding a high number of new construction jobs for the past 12 months included California (35,600 jobs, 5.6 percent), Texas (27,700 jobs, 4.5 percent), Illinois (11,100 jobs, 5.8 percent)

Construction crews this summer made significant progress on a multi-million dollar project that marries safety with art and may one day redefine the landscape along Lake Michigan.

Table of Contents ................4 Snow & Ice Section ......35-41 Truck & Trailers Section ........ ......................................47-55 Attachment & Parts Section ......................................59-63 Recycling Section ........77-93 Auction Section..........98-111 Business Calendar ............94 Advertisers Index ............110

ELFA Reports Industry Confidence Up in Sept. The Equipment Leasing & Finance Foundation (the Foundation) released the September 2014 Monthly Confidence Index for the Equipment Finance Industry (MCI-EFI). Designed to collect leadership data, the index reports a qualitative assessment of both the prevailing business conditions and expectations for the future as reported by key executives from

the $827 billion equipment finance sector. Overall, confidence in the equipment finance market is 60.2, an increase from the August index of 58.9. When asked about the outlook for the future, MCI-EFI survey respondent Valerie Hayes Jester, president, Brandywine Capital Associates Inc., said, “We are experiencing stronger demand than in the past several months, which

bodes well for a strong fourth quarter. There is still concern for yield erosion, but we look forward to concluding the year on a positive trend.” September 2014 Survey Results: The overall MCI-EFI is 60.2, an increase from the August index of 58.9. • When asked to assess their

business conditions over the next four months, 36.4 percent of executives responding said they believe business conditions will improve over the next four months, up from 18.2 percent in August. 60.6 percent of respondents believe business conditions will remain the same over the next four months, down from 78.8 percent in August. 3 percent believe business condisee ELFA page 104

Page 2 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

PROVIDING THE BEST IN

USED EQUIPMENT 2002 Cat D5M........................................$37,500

2004 Cat D6R..........................................$81,000

1999 Volvo L70C....................................$39,500

2001 Komatsu HD325-6 ....................$137,500

S/N 3CR01772, 10,457 Hrs, EROPS, Appears Good, PAT Blade, UC Fair Run Out

S/N ADE00479, 11,088 Hrs, EROPS, S Blade, Undercarriage on Run Out, Drawbar

S/N V15854, Hrs Unknown, Meter Reads 7517, EROPS, Bucket, Tires Good, Hyd Coupler

s/n 5907, 13,525 hours, EROPS, tires, body and sheet metal all good

2004 Volvo L60E....................................$59,500

2006 Kobelco SK480 ............................$65,000

2006 Cat 966H ....................................$179,500

2011 Cat 262C........................................$33,000

S/N V60363, hours unknown, EROPS, bucket, lug tires fair, hyd coupler

S/N YS06U0571, 9187 Hrs, EROPS, LongStick, Bucket, Undercarriage Fair

S/N A6G00225, 8535 Hrs, EROPS, A/C, GP-bkt, tires good, engine rebuilt at 7422 hours

S/N MST03900, 2520 Hrs, EROPS, A/C, Hyd Quick Coupler, 2-Speed, Bkt, Tires Fair

2003 Hitachi ZX600LC........................$110,000

2011 Cat 966K4....................................$225,000

1991 CAT 772B ....................................$85,000

1999 Cat D6M LGP ..............................$69,000

S/N 004015, 10,484 Hrs, EROPS, Undercarriage Fair, Coupler, Bkt

S/N TFS00170, 11,515 Hrs, Bucket, Tires Good, EROPS, A/C, Auto Lube

S/N 64W00186, 34,542 Hrs, EROPS, body good, tires good, good for age

S/N 2RN00542, 10,370 Hrs, EROPS, PAT blade, winch, rear screen, under carriage good

2012 New Holland L218 ......................$16,500

1993 Ingersoll Rand ST105 ..................$6,500

2008 Cat 297C XPS ..............................$32,500

2004 Cat D6RLGP DSII ........................$81,000

S/N NCM447523, 3637 Hrs, New Engine at 3000 Hrs, Bucket, Heat, Tires Good, EROPS No Door

S/N 5137, 5169 hours, no ROPS, runs good, drums good

S/N GCP00782, 5370 Hrs, EROPS, A/C, High Flow, Bkt, 2-Speed, Self-Leveling, Tracks Good, New Drive Motor at 5365 Hrs

S/N ADE00479, 11,090 Hrs, EROPS, A/C, S Blade, Drawbar, Undercarriage On Run Out

Contact: Jeff Speer

FABCO Equipment Inc. 11200 W. Silver Spring Rd., Milwaukee, WI 53225

800.353.1944 ... For Used Equipment 877.754.4477.... For Used Work Tools & Attachments 414.461.9100 ... In WI and Upper Michigan

www.FABCO.com Hundred of machines. Listings updated daily.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 3

Including:

150 Hydraulic Excavators ator ors Long Reach Excavators

75 5 Bulldozers B lld • Angle Blades & W Winches inches A Available vailable

Larrge Largest gest est Indep Independent pendent R Rental ental F leet in the Mid west! es Fleet Midwest! Over Ov ver 1000 0 units uni available a vailable for for rrent! e ent!

50 0 Wheel Loaders Mantis Cranes 30-100 T Ton on

35 Articulated Dump Trucks Trucks O On/Off Road W Water ater Trucks Tru rucks cks s

Illinois T Truck ruck & Equipment 320 Briscoe Drive Morris, Illinois 60450 www.iltruck.com www.iltruck.com T Toll oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: rental@iltruck.com & sales@iltruck.com

Page 4 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWEST EDITION

IN THIS ISSUE 12

Circulated Throughout

Founder, Publisher & CEO Midwest Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Main office

To read these stories and many more, visit www.constructionequipmentguide.com

SPECIAL SECTION 77 RECYCLING, CRUSHING AND SCREENING Be sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

33 AEM/AEMP DRAFT TELEMATICS API STANDARD NOW AVAILABLE The AEM/AEMP Draft Telematics API (application programming interface) Standard is now available to end-users, including contractors, fleet managers, rental managers and dealers/distributors, as well as OEMs, systems management firms and other interested construction/industrial and related industry professionals.

34 I MAKE AMERICA HARLEY TOUR STOPS AT CASE TO

FEATURES 6

BUTLER PARTNERS WITH MITCHELL

Butler Machinery Company recently announced a new educational partnership with Mitchell Technical Institute (MTI) to be delivered at the Mitchell campus .

MCCANN INDUSTRIES CELEBRATES OKTOBERFEST

44 ARTBA HONORS OUTSTANDING EFFORTS TO IMPROVE SAFETY IN ROADWAY WORK ZONES

12 WILSON EQUIPMENT CELEBRATES 125 YEARS

72 PRESIDENT OF C.E. DUFF & SONS, OAIMA MEMBER

WITH OPEN HOUSE

JAMES E. DUFF PASSES AWAY

Wilson Equipment Company celebrated its 125th anniversary with an open house event at the company’s headquarters location in Lexington, Ky., on Sept. 12.

James Duff, president of C. E. Duff & Sons (now Duff Quarry Inc.) passed away on Sept. 16 in Bellefonte, Ohio. He was 81.

TRAINING PROGRAM Ask Rudd Equipment Company Senior Vice President and Product Support’s Bill Maggard why the company invests so much in training technicians that may end up leaving the company and he’ll tell you, “The only thing more expensive than training technicians is not training technicians.”

18 GOMACO INVITATIONAL #33 FEATURES AEM’S HARLEY TOUR Contractors, distributors, suppliers, association members and media personnel from across the United States and Canada traveled to Ida Grove, Iowa, on Sept. 16 and 17 for the GOMACO Invitational #33.

24 QUARRY QUEST BRINGS EARTHMOVING EXPERIENCE Over the last decade the event has attracted 200,000 people and raised more than $1,000,000 for local children’s charities and the Quarry Quest Environmental Educational Fund.

For advertising rates Contact

Edwin M. McKeon Sr. Joseph S. McKeon Craig Mongeau Christine Reckner Pete Sigmund John Pinkerton Tom Weinmann Cathy Printz

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com Joseph S. McKeon • Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

773/769-4090 800/632-0233 773/769-4280 e-mail jmckeon@cegltd.com

Toll Free Fax

Kent Hogeboom National Sales Manager

A nationwide campaign to press Congress to support pro-manufacturing policies rolled through Racine, Wis., on Sept. 26 when the I Make America Harley Tour stopped at Case Construction Equipment.

On Oct. 3, McCann Industries got into the spirit of the season and hosted an Oktoberfest Open House at its Bolingbrook, Ill., Branch facility.

16 RUDD EQUIPMENT INVESTS IN TECHNICAL

Web site Editorial e-mail Advertising e-mail

RALLY SUPPORT

American Road & Transportation Builders Association’s Transportation Development Foundation (ARTBA-TDF) recognized six private sector organizations for their commitment to promoting safety during the association’s 16th annual “Roadway Work Zone Safety Awareness Awards.”

OPEN HOUSE

Toll Free Fax

• North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

315/866-1423 800/988-1203 315/866-1379 e-mail khogeboom@cegltd.coom

Toll Free Fax

Contact

Ed Bryden • Central and Eastern Indiana • Michigan • Ohio • Kentucky

440/268-9690 800/810-7640 440/268-9691 e-mail ebryden@cegltd.com

Toll Free Fax

Contact

Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota • South Dakota

952/353-1770 866/413-4265 952/353-2750 e-mail pkiel@cegltd.com

Toll Free Fax

102 MORE THAN 2,140 BIDDERS PARTICIPATE IN RITCHIE BROS. SALE Bidders came from 45 countries, including 48 U.S. states. More than 63 percent of the equipment was sold to out-of-state buyers, from as far away as Guatemala, Dominican Republic and Greece.

EQUIPMENT 48 XL TRAILER 130 HDG Multi-Axle Trailer 54 ALUMA 7816 Tandem Axle, Flatbed Utility Trailer 60 PALADIN Hardscape Grapple

DEPARTMENTS 94 CLASSIFIEDS 94 BUSINESS CALENDAR 98 COMING AUCTIONS

Mobile

Facebook

Twitter

YouTube

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2014, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 5

Quality Used Equipment...with support to back it up

Komatsu WA250-6, ’11, 5,646 hrs ..........$94,500

Komatsu D65EX-15, ’06, 2,301 hrs ........$144,500

DOZERS

COMPACTION

Cat D5H LGP, ’88, 4,957 hrs ....................$24,500 Komatsu D39PX-22, ’09, 878 hrs ............$89,500 Komatsu D51PX-22, ’08, 4,013 hrs ......$124,500 Komatsu D61PX-15EO, ‘07, 4,771 hrs ..$120,000 Komatsu D65EX-15, ’06, 2,301 hrs........$144,500 Komatsu D65EX-15EO, ’07, 3,934 hrs ..$149,500 Komatsu D155AX-6, ’07, 6,524 hrs ......$239,500 Komatsu D275AX-5, ’03, 23,015 hrs ......$99,500

Bomag BC61RB, ’00, 15,862 hrs ............$59,900 Bomag BC1172RB, ’05, 15,531 hrs ........$99,900 Bomag BW205AD, ’02, 3,520 hrs ............$26,500 Hamm HD14VV, ’09, 2,460 hrs ................$29,500 Hamm HD90 Ozzy, ’04, 4,300 hrs ............$36,500 Volvo DD90HF, ’09, 638 hrs ....................$59,500

MILLING

Komatsu HM300-2, ’06, 6,500 gal ........$275,000 Komatsu HM400-2, ’07, 8,000 gal ........$395,000

Broce RJ350, ’00, 3,920 hrs ....................$19,500 Roadtec RX700, ’08, 4,630 hrs..............$170,000 Wirtgen W60, ’08, 628 hrs ....................$144,900 Wirtgen W60 Rumbler, ’11, 400 hrs......$240,000 Wirtgen W600, ’03, 2,403 hrs..................$77,500 Wirtgen W2100, ’04, 8,373 hrs ..................$CALL

PAVING Blaw-Knox PF115, ’08, 1,921 hrs ............$14,500 LeeBoy 8500HD, ’04 ................................$24,500 LeeBoy 8500LD, ’08, 910 hrs ..................$74,500 Vogele 1110WB, ’03, 1,004 hrs ..............$85,000 Vogele 5103-2, ’11, 1,273 hrs ..............$250,000 Vogele 5203-2, ’09, 2,727 hrs ..............$195,000

WATER EQUIPMENT

WHEEL LOADERS Komatsu WA65-3, ’04, 745 hrs................$56,500 Komatsu WA70-5, ‘06, 2,592 hrs ............$47,500 Komatsu WA250-6, ’11, 5,646 hrs ..........$94,500 Komatsu WA250-6 High Lift, ’11, 2,086 hrs .......... ................................................................$124,500 Komatsu WA320-7, ’13, 462 hrs............$174,500 Komatsu WA320-7, ’14, 81 hrs..............$165,000 Komatsu WA380-6, ’11, 2,094 hrs ........$179,500 Komatsu WA380-7, ’13, 1,385 hrs ........$185,000 Komatsu WA430-6, ’07, 4,404 hrs ........$134,900 Komatsu WA450-6, ’07, 8,069 hrs ........$149,500

Vogele 5203-2, ’09, 2,727 hrs ........................$195,000

V I S I T

Komatsu WA500-3, ’98, 11,556 hrs ........$79,500 New Holland LW190B, ’04, 5,908 hrs......$33,500 Terex TL300-2, ’08, 2,441 hrs..................$79,500

CRUSHING/SCREENING Kleemann MSD190D Screen, ’13, 688 hrs ............ ................................................................$255,000 Kleemann MC110Z Crusher, ’13, 714 hrs.............. ................................................................$475,000

GRADERS Komatsu GD655-3C, ’06, 1,866 hrs ......$159,500 Komatsu GD655-3EO, ’09, 1,474 hrs ....$169,500

FORESTRY Norco Puma 220, ’11, 78 hrs ....................$CALL Ponsse Cobra HS10, ’98, 20,013 hrs ......$75,000 Valmet 415EX/Rolly II, ’05, 10,092 hrs $135,000 Valmet 840.2, ’05, 6,600 hrs ................$169,000 Valmet 860.4, ’12, 1,640 hrs......................$CALL Valmet 911.3, ‘08, 8,655 hrs ................$235,000

MATERIAL HANDLERS Cat 365CL-MH, ‘08, 10,428 hrs ............$154,500 Komatsu P400LC-8MH, ’08, 6,095 hrs ..$219,500

Broce RJ350, ’00, 3,920 hrs ......................$19,500

EXCAVATORS Cat 330CL, ’02, 12,032 hrs ......................$69,500 Cat 345BL, ’03, 10,750 hrs ......................$72,500 Cat 385CL, ’06, 9,646 hrs ..........................$CALL Deere 350DL, ’07, 6,752 hrs..................$124,500 Deere 350DLC, ’07, 5,837 hrs ..............$124,500 Deere 350DLC, ’07, 6,832 hrs ..............$115,000 Deere 590D, ’93 ......................................$24,500 Gradall XL4100 III, ’09, 5,191 hrs ........$130,000 Kobelco SK400LC Mark IV, ’97 ................$38,500 Komatsu PC35MR-2, ‘07, 4,747 hrs ........$26,500 Komatsu PC88MR-8, ‘09, 1,195 hrs ........$74,500 Komatsu PC138USLC-8, ’11, 1,142 hrs $124,500 Komatsu PC138USLC-8, ’11, 3,218 hrs $104,500 Komatsu PC160LC-7, ’05, 8,230 hrs........$54,500 Komatsu PC200LC-6, ’01, 5,824 hrs........$59,500 Komatsu PC200LC-7, ’02, 6,850 hrs........$84,500 Komatsu PC200LC-7, ‘03, 8,114 hrs........$79,500 Komatsu PC200LC-7, ’03, 5,975 hrs........$89,500 Komatsu PC200LC-7, ’03, 6,128 hrs........$69,900 Komatsu PC200LC-7, ’04, 7,640 Hrs ......$89,500 Komatsu PC200LC-8, ’06, 4,621 hrs........$97,500 Komatsu PC220LC-6, ’96, 6,510 hrs........$64,500 Komatsu PC220LC-8, ’06, 9,084 hrs........$96,500 Komatsu PC220LC-8, ’06, 2,606 hrs......$139,500 Komatsu PC220LC-8, ’07, 5,757 hrs......$119,500 Komatsu PC220LC-8, ’09, 4,707 hrs......$129,000 Komatsu PC228USLC-1, ’99, 4,400 hrs ..$54,500 Komatsu PC300LC-7EO, ’06, 6,320 hrs ..$99,500 Komatsu PC300LC-7EO, ’06, 7,736 hrs $110,000 Komatsu PC360LC-10, ’14, 655 hrs ......$269,500 Komatsu PC400LC-7, ’04, 10,300 hrs......$99,500 Komatsu PC400LC-7, ’05 8,163 hrs ......$124,500 Komatsu PC400LC-7, ’05 11,134 hrs ......$92,500 Komatsu PC400LC-7EO, ’07, 3,991 hrs $204,500 Komatsu PC400LC-8, ’08, 3,815 hrs......$209,500 Komatsu PC450LC-8, ’11, 2,389 hrs......$309,500 Komatsu PC600LC-7, ’05, 10,328 hrs....$199,500 Komatsu PC600LC-7, ’05, 4,910 hrs......$369,500 Komatsu PC600LC-8, ’06, 10,478 hrs....$199,500 Komatsu PC650LC-5, ’95, 17,615 hrs......$42,500 Komatsu PC750LC-7, ’04, 6,613 hrs......$349,500 Volvo EC210BLC, ’04, 13,274 hrs ............$57,500 Volvo EC240CLR, ’11, 454 hrs ..............$195,500

Financing Available for Qualified Buyers

15 Roland Branch Locations in IL, IN, MI, MO, and WI

Call Jay Germann (217) 789-7711 • Email: jgermann@rolandmachinery.com

R O L A N D M A C H I N E R Y . C O M

Page 6 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke • (630) 739-7770

Excavator Rental Specials Bolingbrook, IL

Serving the Constructor ®

View our complete Used & “Like New” inventory at McCannOnline.com

Clean, reliable equipment

Competitive rates

Rent by the day, week, or month

Delivered to your job site

Illinois Addison 630-627-0000 Bolingbrook* 630-739-7770

2012 Case 850L, s/n NCD80092, 700 Hrs, 2011 Case 580SN, s/n JJGN58SNKAC536021, Cab w/Heat and AC, 124” Blade, 24” 2480 Hrs, Cab w/Heat & AC, Extenda-Hoe, Grousers ......................................$120,000 Ride Control, Two Lever, 4 in 1 Bkt, Aux Hyds, 12”, 18” and 24” Bkts ....................$59,900

2012 Case Cx250CLR, s/n DAC250K6NCSAM1210, 500 Hrs, 60’ Long Reach, Control Pattern, 60” Ditch Bkt .......... ......................................................$230,000

2012 Case SV250, s/n JAFSV250JBM435435496, 100 Hrs, Cab w/Heat & AC Two Speed, Hyd Coupler, 78” Bkt, 33 x 15.5 Tires ........................$43,500

Chicago 312-942-9200 Crestwood 708-597-3110

CX130 Excavator

CX160 Excavator

CX210 Excavator

CX225 Excavator

MC r h EJH EFQUI $410/Day, $1,230/Week, $3,690/Month

MC r h EJH EFQUI $475/Day, $1,425/Week, $4,275/Month

MC r h EJH EFQUI $580/Day, $1,740/Week, $5,220/Month

MC r h EJH EFQUI $755/ Day, $2,265/Week, $6,795/Month

Rent Today!

McHenry* 815-385-0420 Wauconda 847-526-9444

2013 Case SR250, s/n 2003 Takeuchi TL130, s/n s/n 21301340, 2003 Case 90XT, s/n JAF0392717, 2500 JAFSR250JCM443037, 310 Hrs, Cab w/Heat, 2650 Hours, Cab w/Heat & Ac, NEW Hours, Sims Cab, Hyd Coupler, Ride Control, Two Speed, Hyd Coupler, 78” Bkt, 14 x 17.5 TRACKS, 67” Smooth Bucket..........$19,200 82” Bkt, 12 x 16.5 Tires ..................$22,000 Tires ................................................$43,500

CX240 Excavator

CX330 Excavator

MC r h EJH EFQUI $700/Day, $2,100/Week, $6,300/Month

MC r h EJH EFQUI MC r h EJH EFQUI equipment. Call us today to supply your next $875/Day, $2,625/Week, $7,875/Month $1,235/Day, $3,705/Week, $11,115/Month

2012 Case SR250, s/n JAFSR50VBM434310, 750 Hours, Cab w/ Heat & AC, BIc High-Flow, 12 x 16.5 Tires, 72 “ Bucket............$42,500

McCann CX460 Rents aExcavator full line of heavy and light construction rental. McCannOnline.com

Indiana Schererville* 219-865-6545 *Case authorized dealer location

IMT SERVICE TRUCKS Hitting the Books...

Butler Partners With Mitchell

Lots of Extras! New 2014 IMT 11’ Body 10K, 30’ Crane & Hydraulic Outriggers, and the ALL New VanAir I300 to fight the Def problems. Has Battery Booster, 300 Amp Welder, and Hydraulic Pump mounted on the Body with all Raised Compartments, and LOTS of Extras. Mounted on a 2014 F-750 Ford Air-Ride Truck with a 250 HP Cummins Engine and Auto 5 Speed. Call for Pricing

Check this Price! New 2014 IMT DOM2 11-FT Body Mounting at IMT Factory now 7500# 30’ Hydraulic Crane with Radio Remote Controller, Hydraulic Compressor & Other Extras, HD 8 Drawer Tool Chest & Basic Shelf Package, Mounted on 2004 International 4300 26K GVW w/225hp DT-466, 6 Speed Manual, Air Conditioning, Approx. 180,000 Miles, Very Clean Unit!! Sale Price … $88,950

DEF

Star Equipment

STAR

Construction Equipment & Supplies Sales • Service • Rentals

EQUIPMENT LT D .

www.starequip.com 877-267-7203 Des Moines • Ames • Cedar Rapids • Waterloo

Butler Machinery Company recently announced a new educational partnership with Mitchell Technical Institute (MTI) to be delivered at the Mitchell campus. The new ButlerEDGE program will begin in fall 2014. This two-year program will be offered for an Associate of Applied Science degree and will consist of a combination of classroom education and an internship at a Butler location, paying more than $17/hour. Applicants to the program will be selected by Butler based upon a set of criteria including academic performance, test scores and other employment-related criteria. Those accepted to the program will enroll at MTI as full-time students. The program will be divided into a series of modules delivered both on campus and at an intern site dealership. Students will be compensated for the time they spend at the intern site. In addition, Butler will furnish all tools and uniforms. After graduation, the student will immediately begin full-time employment with the company. The program is similar to Butler’s ThinkBIG program offered at other schools in North Dakota and South Dakota. Rather than studying heavy equipment, students in

the ButlerEDGE program will focus on learning to service AGCO brand agricultural equipment. MTI’s Agriculture and Transportation Technology division has the space and technology to add the ButlerEDGE program to its roster of highquality programs, including Farm Power Technology. MTI president Greg Von Wald is excited about the new program. “MTI has a long history of offering top-notch agricultural education in our region. The addition of the ButlerEDGE program will provide students with unique, hands-on experiences and will help the Butler Machinery Company continue to offer high quality service to its customers,” said Von Wald. Butler Machinery Company has been in business since 1955 with locations across North Dakota, South Dakota, and, most recently, Nebraska. For information about applying to the ButlerEDGE program, contact Rebecca Rensvold at 701/298-1735 or becomeatech@butlermachinery.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 7

View us at: www.amstate.com

PAVERS / ROAD WIDENERS CEDAR RAPIDS CR662RM - ‘10, 1611 Hrs, MTV w/Hopper Insert, THRU SHOP CURRENT UPDATES ADDED, #61981A, S/N JO798 ..........................................................................$239,878 MAULDIN 1500 - ‘03, 844 Hrs, Track Conveyor Feed, 8’-13’ Screed, #61999A, S/N 1134 ............ ..........................................................................................................................................$27,950 MAULDIN 1550C - ‘09, 1533 Hrs, Track, Conveyor Feed, #C000620, S/N 2138 ..............$54,600 MAULDIN 1750C - ‘13, 175 Hours, 8’-16’, #C000225 ....................................................$119,950 MIDLAND SPR6 - ‘13, 217 Hours, take a look at this its ready for work right hand discharge, #C000040, S/N 212 ........................................................................................................$105,095 MIDLAND SPD8 - ‘12, 298 Hrs, Ready to go, #61979A, S/N 466....................................$144,950 NEAL CART PATH PAVER - ‘08, 638 Hrs, 5’-8’ Screed Conveyor Feed, #61886A, S/N 03-0608 .... ..........................................................................................................................................$32,500 CALL items may be on rent causing pricing and hours to vary.

MILLING MACHINES

YOUR AUTHORIZED DEALER

in WISCONSIN and UPPER MICHIGAN for: GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS • LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLER CRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/ JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAG CRUSHERS • MANITOWOC CRANES

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT

WIRTGEN W50DC - ‘13 • 20” Cut, Deep Cut Machine, 3 Wheel, Rear Discharge Mill, 236 Hrs $214,950

ROLLERS INGRAM 315 - 4 to Choose from, 3 Wheel Static Roller, s/n & Hrs Available ..............$26,500 Ea. SAKAI R2H-2 - ‘12, 388 Hrs, 3 Wheel Static, 83”, #61950A, 1R5-60251 ........................$83,795 SAKAI R2H-2 - ‘13, 90 Hrs, 3 Wheel Static, #C000223, 1R5-60309 ................................$89,795 SAKAI R2H-2 - ‘13, 30 Hrs, 3 Wheel Static, #C000252, 1R5-60313 ................................$93,412 SAKAI R2H-2 - ‘13, 291 Hrs, 3 Wheel Static, #C000312, 1R5-60312 ..............................$87,750 SAKAI SW850-2 - ‘11, 224 Hrs, 79” Double Drum Vibratory Roller, #61870A, S/N 50152 ............ ..........................................................................................................................................$92,578 SAKAI SW880 - ‘12, 295 Hrs, 79” Double Drum Vibratory Roller, #61938A, S/N 10142$117,980 SAKAI SW300 - ‘13, 55 Hrs, 40” Double Drum Vibratory Roller, #C000211, S/N 40156 ..$33,950 SAKAI SW502 - ‘13, 233 Hours, 51 inch drum 9000 lb remaining std and or eptw warranty, #C000212..........................................................................................................................$41,974 *Comes with any remaining standard and 3 year extended power train warranty.

EXCAVATORS GRADALL XL4100 - ‘94, 8368 Hrs, Working as is, #C000386, S/N 414218......................$19,500 GRADALL XL4100 - ‘98, 8884 Hrs, Workable, as is, #62013A, S/N 413282 ....................$25,000 GRADALL XL4100 - ‘02, 7745 Hrs, Good Machine, #C000402, S/N 411552 ....................$42,500 GRADALL XL4100 - ‘02, 7068 Hrs, Call on this One, S/N 415548 ....................................$53,950 LIEBHERR A904C - ‘11, 1435 Hrs, No Buckets w/Machine, Many Buckets in Stock for This ........ ........................................................................................................................................$156,950

Contact Marty in Illinois 1-800-307-0221

mahrendt@finkbinerequipment.com Photos & Detail Descriptions view: www.finkbinerequipment.com

GROVE RT760 ROUGH TERRAIN CRANE

GROVE TM9120 TRUCK CRANE

ALLIS 500-SD PORTABLE CONE CRUSHER, 300 HP electric motor, rear feed conveyor, side discharge conveyor, motor control panel, tri-axle, hydraulic leveling ................................................................................................$130,000 JCI/FABTEC 6’X20’ TD DUAL SCREEN PLANT, (2) 30” reversing conveyors under primary screen, 60” conveyor under secondary screen, (3) 42” cross conveyors (6) hydraulic leveling jacks, motor control panel ............$182,500 JCI K-300 “KODIAK” PORTABLE CONE PLANT, 300 hp electric motor, 36”x 20’ side discharge conveyor, 36”x 35’ feed conveyor, motor control panel, hydraulic leveling......................................................................................$375,000 POWERSCREEN 510 COMMANDER RINSER SCREEN PLANT, 11.8 Yd. hopper with hydraulic dump grizzly, 36” feed conveyor, 5x10 3-Deck screen, tandem axle, Deutz diesel ..................................................................................$52,400

EXCAVATORS DEMAG H95 MASS EXCAVATOR, Powered by a Cat 3408 Diesel, with a 24’7” Gooseneck Boom, and a 10’8” Stick with 43’6” Reach and 25’ Digging Depth, 7.2 cu yd HD Rock Bucket, Approx. 220,000 Lb. Working Weight, 5800 Frame Hours and Recent Engine Rebuild........................................................................................$95,000 LIEBHERR R974B HDSL UTILITY CRAWLER EXCAVATOR, Powered by a 471 HP Liebherr D9408TI Diesel, 33’11” Semi-Gooseneck Boom with 15’5” Stick, 5 cu yd HD Bkt, 21’x14’ 4” Wide U/C with 30” Track Pads and Removable Sideframes, Approx. 190,000 Lb. Working Weight ....................................................................CALL

CRANES GROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom, 32’ to 56’ Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work ....................................$155,900 GROVE TM9120 100 TON TRUCK CRANE, 1997, 42’ to 130’ boom, 33’ to 58’ offsettable telescopic swingaway, Grove HO50 main & aux. hoists, LMI, Cummins 6CT8.3 diesel, mounted on a Grove 8 x 4 chassis with a Cummins N14 diesel and Roadranger transmissions. Tandem boom dolly ....................REDUCED TO $299,000 GROVE RT855B 55 TON ROUGH TERRAIN CRANE, 1995, with Cummins diesel, 37’ to 115’ boom, 35’ to 60’ swingaway, LMI, Grove model HO30 main & aux. hoists, 29.5x25 tires ..............................................$159,500 LIEBHERR HS883HD DUTY CYCLE HYDRAULIC CRAWLER CRANE, 132 Ton Class, (2 Available) with Liebherr V8 Diesels, Main Hoists with 44,000 SLP or 66,000 SLP, 115’ Main Boom, Removable Sideframes ..........CALL

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Lanny Peterson at:

lpeterson@amstate.com or mobile 1-715-574-8089 or 1-800-242-7113

Page 8 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

McCann Industries Celebrates Oktoberfest Open House

(L-R): Enjoying the open house are Rob Park, Capistar Group; Jay Courtney, sales manager of McCann Industries; Kirk Neetz, Neetz Brothers Construction; and Jim McCann, president of McCann Industries.

(L-R): Rich Kubinski Sr. of Richard Kubinski Excavating; Steve Costello, McCann Industries; Rich Kubinski Jr.; and Jim Serena, also of Richard Kubinski Excavating, catch up during the open house.

n Oct. 3, McCann Industries got into the spirit of the season and hosted an Oktoberfest Open House at its Bolingbrook, Ill., Branch

facility. Those in attendance were treated to food, drinks and the opportunity to enter drawings and win prizes such as cash, gift cards, iPads and DeWalt tools, as well as participate in McCann’s excavator skills competition and skid steer rodeo. McCann also held several equipment demos.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) see MCCANN page 46

(L-R): Stopping by the Husqvarna display tent are Terry Brew, Brew Construction; Jim Baratt, also of Brew Construction; Vince Perfetto, Black Oak Pools; and Brian Bollinger of Husqvarna Construction Product.

(L-R): Vic Ligocki, McCann Industries, shows the features of this Sullair 185 compressor to Rusty Rogers and Pete Grossi of the city of Lockport.

Mike Ruddy (L), McCann Industries, speaks with Dwayne McGill, McGill Constructions, in front of the Case CX17B mini-excavator.

Taking a look at the Wacker RD12 roller (L-R) are Randy Pesaveento, Anthony Cielenski and Ralph Riley, all of the city of Lockport.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees WHEEL LOADERS

Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25 rubber, 15K hours, work ready . . . . . . . . . . . .$42,500 Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . . . .$79,500 John Deere 624G, 1996, EROPS, quick coupler, GP bkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$46,000 Volvo L60E, 2005, EROPS, coupler, aux hyd, boom susp, 20.5R25, v. good . . . . . . . . . . . . . . . . . .$89,500 COMPACTORS

IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean $69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000 (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500 LANDSCAPING

Case/IH 485 Utility Tractor, 1986, Case 3 cyl dsl engine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd angle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500 CRAWLER LOADERS

Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt .$37,500 Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000

OFF ROAD HAULERS Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready . . . . . . . . . . . . . . . .$127,500 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites . . . . .$87,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 CRAWLER TRACTORS

Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6" TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000 (5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALL Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB coupler, plumbed, 8’6” width, nice, work ready . .CALL Volvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing very good condition . . . . . . . . . . . . . . . . . . .$159,000 TRUCKS & TRAILERS

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL AIR COMPRESSORS

IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL SPECIALS

(12) Allmand Light Plants, 2008-2010, diesel, s/a towtype, (4) MH lights, excellent . . . . . . . . .From $5,200

(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, BACKHOES winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea. Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000 Case 580L Rubber Tire Loader Backhoe, 1997, (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea. DRILLS John Henry Drill Mtd on Cat 320N, 1994, 24' mast, CRANES Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, Duraquip dust collection . . . . . . . . . . . . . . . .$150,000 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 MISCELLANEOUS Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom (2) Balderson Broom Attachment for Cat IT Machines, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. MOTOR SCRAPERS

ATTACHMENTS Cat 613C Water Wagon, 1994, 5000 gal drop tank, BUCKETS ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 PC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good Over 100 Excavator, Loader, Specialized & Grapple condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Buckets in Stock Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice -Call For Your Needs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, HYDRAULIC EXCAVATORS excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick couOthers Available Call pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000 Prices Are Negotiable - At Your Inspection Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber, All Equipment is Owned & Operated By operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER ALEX E. PARIS CONTRACTING CO., INC.

Page 10 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

USED EQUIPMENT 2009 VOLVO L120F, 6911 Hrs ..................$155,600

2012 VOLVO L150G, 2765 Hrs ................$267,000

2012 VOLVO L150G, 2674 Hrs ................$305,750

A40 Finance leasing available for 24 months with payments as low as $7,900 per month. Call Doug Wilson for details.

Asphalt/Pavers/Concrete Equipment

Off-Highway Trucks

1987 BLAW-KNOX PF120H, 5952 Hrs ..........................................................$7,222 2004 VOLVO PF5510, 148 Hrs ........................................................................$25,000 2006 VOLVO PF6110, 2866 Hrs....................................................................$166,700 (2) 2007 VOLVO PF6110, 2809-2994 Hrs ......................................$166,700 Ea. (2) 2008 VOLVO PF6110, 3258 Hrs ......................................$166,700-$167,000 2011 VOLVO PF6110, 2288 Hrs....................................................................$206,000

2004 VOLVO A25D, 6313 Hrs ........................................................................$206,000 (3) 2012 VOLVO A25F, 1873-2952 Hrs ..............................$283,500-$305,750 (2) 2013 VOLVO A25F, 1198-1603 Hrs ..............................$300,000-$305,000 (2) 2011 VOLVO A30E, 3148-3747........................................$283,500-$372,500 (8) 2012 VOLVO A30F, 2342-3817 Hrs ..............................$300,000-$328,000 (3) 2013 VOLVO A30F, 1940-2406 Hrs ..............................$324,500-$330,000 (2) 2012 VOLVO A35F, 2036-2962 Hrs ..............................$388,300-$415,000 (10) 2011 VOLVO A40F, 2287-6609 Hrs ............................$322,300-$410,000 (20) 2012 VOLVO A40F, 1873-6565 Hrs ............................$367,000-$447,000 (2) 2013 VOLVO A40F, 3104-4021 Hrs ............................................$388,300 Ea. 2013 VOLVO A40F FS, 2387 Hrs..................................................................$494,750

Compactors-Smooth Drum 2010 VOLVO DD112HF, 1709 Hrs..................................................................$88,900 2008 VOLVO DD118HF, 2030 Hrs..................................................................$83,500 2007 VOLVO DD90HF, 1753 Hrs ....................................................................$58,500

Your VOLVO dealer in: North Dakota Bismarck Fargo Minot Williston

North Carolina Charlotte Raleigh Asheville Greenville

South Carolina Columbia North Charleston Piedmont

Georgia

Excavators-Crawler 2008 VOLVO EC210C LC, 3063 Hrs ..........................................................$122,500 2011 VOLVO EC210CL, 3505 Hrs................................................................$138,900 2013 VOLVO EC220D, 2345 Hrs ..................................................................$144,500 (2) 2013 VOLVO EC220DL, 1954-2517 Hrs......................$139,000-$150,000 2008 VOLVO EC240C, 2268 Hrs ....................................................................$80,555 2011 VOLVO EC240CL, 2796 Hrs................................................................$150,000 2012 VOLVO EC250D LR, 1341 Hrs ..........................................................$189,000 2011 VOLVO EC250DL, 2778 Hrs................................................................$161,250 2004 VOLVO EC330B, 5800 Hrs ....................................................................$52,777 (2) 2011 VOLVO EC340DL, 3291-4099 Hrs......................$177,800-$184,000 (5) 2012 VOLVO EC340DL, 2601-3685 Hrs......................$181,000-$211,200 (2) 2013 VOLVO EC340DL, 1332-2423 Hrs......................$211,250-$216,750 2013 VOLVO EC380DL, 2210 Hrs................................................................$222,000 $ 2011 VOLVO EC460C LC, 5726 Hrs ..........................................................$250,000 2012 VOLVO EC480DL, 2661 Hrs................................................................$328,000 (2) 2013 VOLVO EC480DL, 2143-2351 Hrs......................$324,500-$330,000

Excavators-Mini (up to 12,000 lbs) 2004 VOLVO EC55, 6035 Hrs ..........................................................................$27,777 2008 VOLVO EC55B, 4263 Hrs........................................................................$40,555

Buford Forest Park Savannah

Excavators-Wheel

East Tennessee

Motor Graders

Knoxville Chattanooga

(2) 2011 VOLVO EW180C, 2576-2910 Hrs........................$161,200-$166,700 2012 VOLVO EW180D, 1785 Hrs..................................................................$194,500

2002 VOLVO G720 VHP, 2221 Hrs ................................................................$72,225 2011 VOLVO G946, 1725 Hrs ........................................................................$211,200 2011 VOLVO G946B, 1979 Hrs ....................................................................$211,200

Doug Wilson 704-562-2032 Email: doug.wilson@ascvolvo.com

Full inventory at: www.ascvolvo.com

Billy Brice 678-318-9500 Email: billy.brice@ascvolvo.com

Sweepers/Boom Equipment 2012 BLAW-KNOX FB90, 242 Hrs ................................................................$58,500

Water Equipment - Truck 2006 VOLVO A30D, 6864 Hrs ........................................................................$255,750

Wheel Loaders 2010 VOLVO L110F, 5170 Hrs ......................................................................$155,600 2012 VOLVO L110G, 3266 Hrs......................................................................$200,000 (3) 2013 VOLVO L110G, 2128-2816 Hrs............................$228,000-$234,000 2009 VOLVO L120F, 6911 Hrs ......................................................................$155,600 2009 VOLVO L150F, 6938 Hrs ......................................................................$183,400 (3) 2010 VOLVO L150F, 9601-11467 Hrs ..........................$133,400-$133,500 (3) 2012 VOLVO L150G, 2674-2765 Hrs............................$267,000-$305,750 2011 VOLVO L180G, 4286 Hrs......................................................................$278,000 2013 VOLVO L180G, 2879 Hrs......................................................................$334,000 2012 VOLVO L250G, 3518 Hrs......................................................................$399,000 2003 VOLVO L50D, 7878 Hrs............................................................................$44,444 2010 VOLVO L50F, 8049 Hrs ............................................................................$55,555 2005 VOLVO L60E, 17059 Hrs ........................................................................$33,333 2013 VOLVO L60G, 1464 Hrs ........................................................................$144,000 2012 VOLVO L70G, 3019 Hrs ........................................................................$144,500 (2) 2013 VOLVO L70G, 2690-2936 Hrs ............................................$147,000 Ea. 2005 VOLVO L90E, 6796 Hrs ........................................................................$100,000 (3) 2012 VOLVO L90G, 2073-2618 Hrs ..............................$183,333-$194,500 (6) 2013 VOLVO L90G, 1491-4259 Hrs ..............................$156,000-$189,000

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 11

NORTH DAKOTA Bismarck 701.250.4882 Fargo 701.271.2360 Minot 701.839.4020 Williston 701.570.5309

GEORGIA Buford 678.318.9500 Forest Park 770.319.0074 Savannah 912.964.8079

NORTH CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710

SOUTH CAROLINA Charleston 843.414.1120 Columbia 803.791.0740 Piedmont 864.704.1060

TENNESSEE Chattanooga 423.308.7940 Knoxville 865.525.1845

The power to carve your own path.

Smart Works. Look to ASC Construction Equipment for industry-leading Volvo motor graders. Every grader in our fleet is built with the power, precision, pull and force you need to get the most out of each and every pass.

ascvolvo.com

Page 12 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Wilson Equipment Celebrates 125 Years With Open House

ilson Equipment Company celebrated its 125th anniversary with an open house event at the company’s headquarters location in Lexington, Ky., on Sept. 12. The dealership invited its customers to help celebrate in a relaxed atmosphere, complete with a barbecue lunch. Manufacturer representatives from Case Construction Equipment and Bomag Territory Manager Dale Alferink were on hand to help out with the festivities and provide information on the equipment on display at the event. What was started in 1889 by B.B Wilson as a one man operation renting and selling horse buggies has grown into a full line equipment company with loca-

tions in Lexington, Corbin and Prestonsburg, Ky. The company is still a family owned business with brothers Charlie, Jay and Will Rodes, who took charge of operations in the 90s from their father. Among the major lines represented by Wilson Equipment Company are Case Construction, Atlas Copco, Bomag Americas, Takeuchi, Link-Belt Excavators and Kawasaki wheel loaders. The company also is the authorized dealer of Noram Motor Graders, WackerNeuson, Blue Diamond Attachments, Paladin Brand Attachments and Towmaster Trailers. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) (L-R): Will Rodes joins his father, Allen Rodes, and brothers Charlie and Jay Rodes in thanking their customers for the company’s ongoing success.

(L-R): Case Factory representatives Adam Doll, Mark Heman and Mike Kaufmann were on hand to help Wilson Equipment Company celebrate.

(L-R): Mike Butler of Hamilton-Hinkle Paving; Gary Williams of Wilson Equipment Company; Mark Reed and Herman Dillon of Hamilton-Hinkle Paving; Dale Alferink of Bomag; and Greg Elam of Wilson Equipment Company take a moment to admire a Bomag BW138AD-5 roller.

(L-R): Wilson Equipment Company’s Charles Martin catches up with Bryce Walker of the Walker Company and Wilson Equipment Company’s Will Rodes.

Sandy and Jerry Ray along with Eric Ray (far R) of Clayton Ray Jr. Excavating are welcomed by Jay Rodes of Wilson Equipment Company.

Charlie Rodes (L) and James Franklin man the grill and keep the food coming.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 13

NEW M-SERIES IN STOCK! Authorized Bobcat Dealer

Toolcats in Stock, Call for Pricing Bobcat Excavators in Stock, Call for Pricing

Bobcat S650 with SB240 Snowblower Available Today

Bobcat Forestry Cutter on T320, for Rent

Largest Selection in the Midwest!

Bobcat Tractors in Stock Now! Call for Pricing. Ask about Incentives and Financing.

USED EQUIPMENT ®

Authorized Bobcat Dealer Bobcat 440 ................Starting at $4,500 Bobcat 463’s ..............Starting at $8,000 Bobcat 542B ..............Starting at $6,900 Bobcat 642 ..............................$7,500 Bobcat 642B ............................$8,500 Bobcat 743 ................Starting at $8,000 Bobcat 751 ......Several Starting at $9,900 Bobcat 753 ..............Starting at $10,000 Bobcat 763F, Series, Open Cab ....$11,500

Bobcat 773G, With Heat ............$15,900 Bobcat 843, Heated Cab ............$10,000 Bobcat 853’s ............Starting at $11,000 Bobcat 863, With Heat ..............$12,900 Bobcat 863G ............................14,900 Bobcat 873 ............................$17,900 Bobcat S130, 2006, Heated Cab ......CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours....Starting at $14,900 Bobcat S250..............Starting at $17,500

Compact Track Machines Bobcat T190’s............Starting at $17,500 Bobcat T200..............Starting at $17,500 Bobcat T250, Gold ......Starting at $24,500 Bobcat T300..............Starting at $25,000

Other Brands Gehl 4615 Skidloader, Open Canopy $8,500 Mustang 2105 ............................CALL New Holland L175........................CALL John Deere 250/260 Models Available...... ..............................................CALL

Excavators Bobcat 331’s, Several w/Heat & Open Canopys ..................Starting at $15,900 Bobcat 334 ................................CALL Bobcat 337D, A/C, HT ................$35,900 Bobcat 341 ..............Starting at $29,990 Bobcat 442 ....Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500 U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857 New Location: Farm-Rite Willmar 1515 West Litchfield Ave. • Willmar, MN 56201 320/235-3672 New Location: Farm-Rite of St. Cloud 810 Mayhew Lake Road N.E. • St. Cloud, MN 56304 844/262-2281

www.farmriteequip.com

Page 14 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

= :; $ < &5.'&807 .9* &80 *5' 35 0&/* & &00 "3)&;

> > > > > > >

=!7*.,*5 =!7*.,*5 !7*.,*5 =!7*.,*5 =!7*.,*5 =!7*.,*5 =!7*.,*5

=6(5&4*5 =6(5&4*5 8&) -56 8&) -56 8&) -56 8&) -56 8&) -56

-56 -56

00 -&9* =!(5&4*5 #*56.32 0*&7-*5 (&' 6864 (&' '., -;) 4814 -.) 0.,-76 .++ 3(/ &5,*

*27&0 29*2735;

8&)75&(6

=!(5&4*56

! ! % % %

! ! !

www.matejcek.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 15

Fiat HD21, Side Boom, JD 850K, 24" Pads, 128" Blade, 1646 hours, Excellent Condition, #U11857 ........$268,000 3 Available $83,500 Ea.

JD 310SJ, Cab, Air, JD 400D, New KLEIN JD 700K, LGP, 30” 8000 gallon water truck, 4x4, Aux Hyd, #U12433 Pads,132” PAT Blade, 7102 hrs, #U11425........ ........................$62,000 Warranty, #U12196 ...... ......................$258,000 ......................$163,000

Case STX550 Scraper JD 350DLC, 13’1" Arm, Tractor, #U12066.......... 32" Pads, #U11703 ...... ......................$254,000 ......................$179,000

Low Hour JD 844K’s Available, 0% for 36 Months on Select Units

JD 350GLC Material JD 850K LGP, 36" Handler, #N5539 .......... Pads, 168" PAT Blade, ......................$495,000 919 hours, #U11976...... ......................$325,000

NPK Hammers, All JD 2112C Scraper Pan, JD 600CLC w/ Genesis Sizes for All Makes. #U12244 ..........$79,000 GXP1200R Shear, Inspected and Well #U10798 ........$468,000 Maintained, GH4-GH18

JD 200CLC, 50’ Long JD 744K, Cab, Air, 5.25 Front, #U11828 ............ Yd Bkt, #U12207 .......... ......................$109,000 ......................$294,000

Page 16 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Rudd Equipment Invests in Technical Training Program Ask Rudd Equipment Company Senior Vice President and Product Support’s Bill Maggard why the company invests so much in training technicians that may end up leaving the company and he’ll tell you, “The only thing more expensive than training technicians is not training technicians.” Rudd Equipment Company’s number one job is providing customer solutions, and Maggard sees skilled technicians as key to achieving that goal. As Rudd Equipment Company’s largest department, in terms of employee numbers, its 175 technicians are testimony to the company’s commitment to providing the highest level of service to its customers The idea for a training department started more than 10 years ago when Rudd Equipment Company Master Technician Dave Goins won the Volvo Master Cup, a competition for technicians. In the competition, technicians from Volvo dealers across the United States gather to demonstrate their skills in diagnosing and repairing Volvo machines purposely taken out of commission for the event. After winning the U.S. competition, Goins went on to place first in the international competition held in Sweden. When Goins won the competition again two years later, Volvo decided to give others a shot at the title and changed the rules to limit individuals to one win. Prior to developing the Technical Training program, Rudd Equipment Company would send technicians to manufacturer based training programs. Although

Rudd Equipment Company’s Technical Center training team is joined by technicians during a recent class session.

Maggard found the programs put on by manufacturers like Volvo, Hitachi and Link-Belt to offer excellent training, he noticed that because courses bring in technicians from throughout the United States, Rudd was limited in the amount of technicians they could enroll for any given class. As it was, it could take a new hire up to three years of training to build a level of proficiency that met Rudd’s standards. Maggard’s goal was to cut that training time in half.

Rudd Equipment Company Technical Trainer Brad Kinser discusses Volvo Construction Equipment’s new L120 H wheel loader.

Another factor in the decision to develop a Rudd Training Center was the valuable resource the company had in technicians like Goins and Maggard felt that with a properly designed program, they could transfer those skills to the rest of Rudd’s technicians. An added benefit of the training sessions is that the courses help the team identify each technician’s specific strengths, allowing them to direct those skills to the jobs where they’re best utilized. For example, a technician dis-

playing a high level of proficiency with cranes may be sent to work when needed away from his home branch on a job based out of another of Rudd’s facilities. Another benefit is that the courses give the technicians an opportunity to get together and share their individual experiences and learn from one another. Originally, when Maggard proposed moving Goins to a position focused solely on training, he was concerned there might not be enough work to keep him busy.

In the classroom, Technical Trainer Brad Kinser reviews a machine schematic on an interactive touch screen display.

What began in 2004 as a one man training department, however, has grown into a fully staffed Technical Center housed along with the Warranty Department in a dedicated building at Rudd Equipment Company’s headquarters location in Louisville, Ky. Goins now serves as Technical Center general manager and heads up a team that includes manufacturer certified Technical Trainers Brad Kinser and Steve Meyer, Technical Call Center Specialist see RUDD page 58

In a recent training session, Roy Riley (L) and Jay Saurbeck get some hands on time with Volvo’s new A40G articulated hauler.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 17

(262) 781-3770 Jim King Mobile: (414) 530-0592 13001 W. Silver Spring Drive Butler, WI 53007

SEE PHOTOS

OF OUR

Fax: (262) 781-5053 Email: jking@aring.com

COMPLETE INVENTORY

AT WWW.ARINGEQUIPMENT.COM

2009 Volvo L60F, Cab, A/C, Radio w/CD, Heated Suspension Seat, Work Lights, 3rd & 4th Functions, Boom Suspension, Hyd. Attachment Bracket, Reversible Cooling Fan, Engine Block Heater, Dymax 4cy High Tip Bucket w/BOE, 20.5R25 Tires – Front 0% (Solid) / Rear 10% (Air Filled w/Sealant) ....$65,000

2011 Volvo DD138HF - Back up alarm, infrared temp sensor, work lights, 328 gal water tank cap, operating weight 30,325 lbs, vibrating frequency: 3200 vpm, vibration centrifugal force: 21,840-42,260 lbs, 84" drum width ................................CALL

2011 Volvo L45F, Cab, A/C, Radio w/CD, Air Suspension Seat, Single Lever Control, Sliding Window Operator’s Door, Front/ Rear Work Lights, 3rd Function, Torque Parallel Linkage, Hyd. Attachment Bracket, Reversible Cooling Fan, Reverse Alarm, 88” 1.8cy Bucket w/BOE, 15.5R25 Michelin Tires ......$99,500

2012 Volvo ECR58, 16” Rubber Tracks, Auto Idling, Heat/AC, Pilot Controls, Counterweight ......................................$65,000

2012 Volvo L150G, 26.R25 L3 VJT Bridgestone Tires, Volvo D13H-E Engine, Radiator, Reversible Cooling Fan, Rear View Camera, Engine Block Heater, Boom Suspension, Rehandling Counterweight, 126” 5.5cy GP STE Bucket w/BOE ..$265,000

2013 Volvo L90G, Camera w/Color LCD Monitor, Sliding Window Operator's Door, Halogen Work Lights Front/Rear, Boom Suspension, Hydraulic Attachment Bracket, Reversible Cooling Fan, Reverse Alarm, Rotating Warning Beacon, Rear Frame Cover Plates, Front Frame Footsteps, Full Rear Fenders, CareTrack System, 104" 3.5cy Bucket w/BOE, 20.5R25 MI XHA2 L-3 Tires, Volvo D6H (Tier 4i) Engine..............$182,500

2013 Volvo BL70B, Municipal trade, 92.5" loader bucket, mech. att. bracket, 1.3 CY GP bucket w/ spill guard, EXT dipper arm, pilot controls,4WD, A/C, radio w/CD, MP3 connection, double battery, boom suspension, additional 1080lb counterweight ..........................................................................$89,500

2012 Dressta TD25M, 26" Severe Service Pads, 90% UC, Hydraulic Controls (3 Spool Valve / 2 Lever), Severe Service Crankcase & Transmission Guards, Final Drive Rock Guard, Full Length Track Roller Guard, Engine Block Heater, Start/Charging Receptacle Plug Assembly w/15' Cable, SemiU Blade (12.5cy) w/Reinforced Center Push Plate & Hydraulic Tllt, Fixed Drawbar ....................................................$270,000

2008 Volvo A40E - A/C, Radio w/CD, Air Suspension Seat w/Armrest, Front Work Lights, Elec Hood Opener, Delayed Engine Shutdown, 29.5R25 Tires ..............................$288,000

2011 Volvo L220G, A/C, Radio w/CD, Heated Air Susp Seat, Rear Camera, Electro-Hydraulic Servo Controls, OptiShift, Comfort Drive Control, Boom Suspension, Work Lights, Reversible Cooling Fan, Axle Oil Cooling, Engine Block Heater, Full Rear Fenders, Re-Handling Counterweight, CareTrack Hardware, 134” 8.2cy STE Bkt w/BOE, 29.5R25 Michelin L-4 Tires, Volvo D13H-F (Tier 4i) ..........................................CALL

2011 Volvo SD116DX, Work lights, flow divider, bolt on pad foot shell, inside scrapper, universal scrapper, grill support installation, operating weight 23,930 lbs, vib frequency 1,870-2,018 vpm, vibration centrifugal force: 47,900-61,000 lbs, 84" drum width ..........................................................................$117,000

2012 Volvo BL70B, Municipal Trade, 92.5” Loader Bkt, Mech. Att. Bracket, 1.3 CY GP Bkt w/Spill Guard, EXT Dipper Arm, Pilot Controls, 4WD, A/C, Radio w/CD, MP3 Connection, Double Battery, Boom Suspension, Additional 1080lb Counterweight .. ......................................................................................$83,500

2012 Volvo L70G, MUNICIPAL TRADE, A/C, Radio w/CD, Heated Air Susp Operator's Seat, Rear Camera, Boom Suspension, Hydraulic 4 Functions, , Reversible Cooling Fan, CareTrack Satellite System w/3yr Subscription, 100" 3.1cy Bucket w/BOE, 20.5R25 BR VJT L3 tires, Volvo D6H (Tier 4i) Engine ........................................................................$165,000

2013 Volvo EC250DL, Municipal trade, 19'9" boom, 11'10" arm, 36" track pads, engine block heater, air susp seat w/heat, joystick 3 switch & 1 prop, climate control with a/c, radio w/cd, rear view camera, 2 pump double act. piping, quick fit piping, pilot pattern controls, straight travel pedal, caretrack ........$217,500

2011 Volvo DD70HF, Backup Alarm, Operating Weight 14,895 lbs, 205 Gallon Water Tank Capacity, Vibration Frequency: 4000 VPM, Vibration Centrifugal Force: 7,820-21,080 lbs, 57” Drum Width ....................................................................CALL

2002 Hitachi ZX330 LC, A/C, Radio, Lubecore Auto Grease System, 36" Pads, 39'8" Boom, 30'9" Stick, 60" Ditching Bucket ..........................................................................$92,500

WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL BREK ZORTMAN (414) 750-3351 FOR MORE INFO.

Page 18 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GOMACO Invitational #33 Features AEM’s Harley Tour

The Putting Tournament Champions are Kevin Gesink (L) of Water Valley Investment Advisors Inc. and Al Meyerdirk of SunSource.

The Contractors’ Shoot-Out Champions (L-R) are Ryan Grathwohl of ESS; Tom Giefer of Kansas Heavy Construction LLC; and Derek Dilger of Smith Paving and Excavating Inc.

ontractors, distributors, suppliers, association members and media personnel from across the United States and Canada traveled to Ida Grove, Iowa, on Sept. 16 and 17 for the GOMACO Invitational #33. Number 33 featured exceptional scores for all of the events, and hosted a visit from the I Make America HarleyDavidson tour. The Association of Equipment Manufacturers’ (AEM) Harley Tour stopped at the Ida Grove Golf and Country Club and GOMACO’s manufacturing facility on Sept. 16. The display featuring the custompainted Harley-Davidson Road King motorcycle gathered a lot of interest from both Invitational attendees and GOMACO personnel with 240 individuals signing up as an I Make America supporter. During one 15 minute period, AEM logged in approximately 75 registrations for I Make America and set a new record for the tour. The GOMACO Invitational golf events began on Tuesday afternoon, Sept. 16, with the Putting Tournament at the Ida Grove Country Club. Putters participated in the tournament on four different greens with

The Holstein Course Champions (L-R) are Andy Kvidera of Manatt’s Inc.; Skyler Luxa of Luxa Construction Co.; Tom Farr of GOMACO; and Chad Hasert of PACE Manufacturing Inc.

The Ida Grove Course Champions, (L-R) are Tim Rife of Luxa Construction; Grant Godbersen of GOMACO; Murray Lodge of Topcon Positioning Systems Inc.; and Ken Singer of Heavy Equipment Guide Magazine.

see GOMACO page 58

The Scramble Tournament “Grand” Champions (L-R) are Jim Hayward of GOMACO; Richard Michael of Turner-Michael Construction Co.; Andru Small of Terry Equipment; and Larry Berg of Wicks Construction.

The Odebolt Course Champions (L-R) are Tom Giefer of Kansas Heavy Construction LLC; David Barthel of Faris Machinery; Mike Norrad of Norquip Supply Ltd.; and Travis Brockman of GOMACO.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 19

THE BEAST BRINGS EVERYTHING YOU NEED TO GET THE JOB DONE.

Tame your toughest jobs with the raw power of KOBELCO excavators. With features like an exclusive independent travel system, operator controlled power boost and a heavy-duty cooling system, you can count on KOBELCO to get more done in less time. Plus, premier operator comforts and industry leading visibility mean you’ll actually enjoy operating these machines.

Up to 84 months of full machine coverage.

P R R E MIO O T EC T

KOBELCO-USA.COM

Page 20 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.liugongna.com T O U G H W O R L D . T O U G H E Q U I P M E N T. We make one of the broadest lines of construction, mining, road building and material handling equipment in the world. All

EVERY JOB. EVERYWHERE.

backed by top-notch warranty, training, parts and service support. Contact your local dealer today for more information...

MidWest Ready Mix & Equipment 1405 East Highway 50 • Vermillion, SD 57069 605-638-0897 www.buyaloader.com

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ October 11, 2014 â&#x20AC;˘ Page 21

Â&#x160;Â&#x2022;Â&#x2022;Čą Â&#x2DC;Â&#x17E;Â? Call DougČąČŚ/Čą Â&#x160;Â&#x;Â&#x17D;ÇąČąČą Sam: (866) 485-7180

2004 Caterpillar 321C LCR: #92063, Cab/AC, QC, Aux Hyd, 9,100 hrs ....................................$64,500

2002 Caterpillar 325CL: #92079, Cab/AC, 31.5â&#x20AC;? Tracks, 10â&#x20AC;&#x2122; 6â&#x20AC;? Arm, QC, 12,100 hrs ........$69,500

2004 Deere 120C: #92046, Cab/AC, 27.5â&#x20AC;? Tracks, Mech Thumb, 4,200 hrs ..............$53,500

2001 Komatsu PC220LC-6LF: #80381, Cab/AC, 60â&#x20AC;&#x2122; Long Front, 5,700 hrs ......................$139,500

1983 Dresser TD20E: #92025, Cab, 24â&#x20AC;? Tracks, Drawbar, Sweeps ......................................$34,500

1998 Caterpillar D6M XL: #81916, Cab/AC, 24â&#x20AC;? Tracks, Winch, 13,500 hrs........................$99,500

2008 Komatsu D51EX-22: #82113, Cab/AC, PAT Blade, Sweeps, KOMTRAX, 2,650 hrs ..$112,500

2004 Komatsu D65EX-15: #80803, Cab/AC, 20â&#x20AC;? Tracks, Drawbar, 3,550 hrs ....................$117,500

2002 Komatsu WA250-3: #92018, Cab/AC, JRB QC, 8,200 hrs............................................$47,500

2007 Komatsu WA250-5: #82117, Cab/AC, JRB QC, 3rd Valve, 4,500 hrs ..........................$93,500

2006 Komatsu WA450-5: #81696, Cab/AC, GP Bucket, High Lift, 8,100 hrs....................$134,500

2006 Komatsu WA80-5: #81981, Cab/AC, QC/Bucket, 1,700 hrs................................$59,500

Page 22 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

For All Of Your Air Compressor Needs Specializing in High Pressure Air 200psi to 500psi SIX LOCATIONS TO SERVE YOU Headquarters Location: 901 Callendar Blvd Painesville, Ohio 44077 440-357-0800

Cincinnati Branch: 9400 Le Saint Drive Fairfield, Ohio 45014 513-942-1488

Cleveland Branch: 9050 Bank Street Valley View, Ohio 44125 216-901-9200

Columbus Branch: 8200 B Memorial Drive Plain City, Ohio 43064 614-733-0777

Indianapolis Branch: 1401 S. Holt Road Indianapolis, IN 46241 317-381-6865

Nashville Branch: 104 LaSalle Court LaVergne, TN 37133 615-630-2668

www.airequipmentrental.com

RENTAL • SERVICE • SALES

PUT THE POWER OF TITAN to work for you

PARTS • SERVICE • RENTALS • SALES

855-44TITAN titanmachinery.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 23

SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

WE STAND READY. We are decision makers. We are problem solvers. We are your Nortrax Parts Specialists. We have only one goal — to keep you up and running and profitable. At Nortrax, we have an or extensive line of quality new and remanufactured parts ffor all makes when you need them. We have the people to help you succeed. We stand ready.

Ashland, WI 715.682.5522

Mosinee, WI 715.693.3820

Grand Rapids, MN 218.326.9427

Richmond, KY 859.623.2030

Chippewa Falls, WI 715.834.2924

Duluth, MN 218.722.7456

Escanaba, MI 906.789.9054

Bowling Green, KY 270.842.3400

Monico, WI 715.487.5583

Bemidji, MN 218.759.1996

Louisville, KY 502.253.3721

London, KY 606.862.8447

facebook.com/NortraxInc

Page 24 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Quarry Quest Brings Earthmoving Experience for Both

uarry Quest, a one-of-a kind experience for both children and adults, was held on Sept. 13 for its 16th year at Michels Materials limestone quarry in Neenah, Wis. The event provides an opportunity to educate attendees about the mining and construction industries, all while raising money for children’s charities and Environmental Education Fund throughout the community. Over the last decade the event has attracted 200,000 people and raised more than $1,000,000 for local children’s charities and the Quarry Quest Environmental Educational Fund, which is dedicated to funding grants for classroom supplies, activities and field trips related to earth science, geology and construction. Visitors got the chance to tour a working limestone quarry, ride and explore giant excavation machinery, become a miner for the day prospecting for fool’s gold, mix up a batch of concrete cakes or construct a wall with bricks and mortar. Major sponsors include Michels Corporation, Miron Construction Inc., Engineers Local 139, FABCO CAT, American State Equipment Company and many more.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) More than 250 businesses and 1,000 volunteers work together to put on this successful event each year.

Quarry Quest 2014 brought in thousands of attendees to the Michels Materials Quarry.

For one day only, the quarry along U.S. 41 became a theme park, classroom and playground.

Miron Construction Co. Inc. supplied all of the cranes so future operators could get lifting experience at Quarry Quest.

Kids of all ages turned out for the Michels Materials quarry event in Neenah, Wis., Sept. 13.

The event featured boom lift rides and tours on a Cat articulated truck.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 25

Children, Adults at Michels Quarry in Neenah, Wis.

Families were encouraged to climb aboard massive quarry and construction equipment and go for a ride.

A slew of activities kept guests busy at the 16th annual Quarry Quest.

The combination of heavy equipment “rides,” hands-on learning and unique family fun have visitors exclaiming that Quarry Quest is the best family outing they’ve ever attended.

Plenty of Caterpillar excavators were on hand for the kids to run, which were supplied by FABCO.

For many families, Quarry Quest has become a tradition. Quarry Quest offers children and adults a one-of-a-kind experience.

Quarry Quest was created by a team of community organizations in 1998 to help provide a better understanding of the construction and mining industries while also raising funds for local charitable organizations.

Children had the opportunity to become a miner for the day and prospect for fool’s gold.

Page 26 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc. Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50 Scale....$85 Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale ..............$85 Allis-Chalmers Yellow HD21 Dozer w/Ripper, 1:50 Scale .......... $85 Bobcat E35 Compact Excavator, 1:25 Scale ................................$50 Bobcat E55 Compact Excavator, 1:25 Scale ................................$60 Bobcat M400 Gold Skid Steer Loader, Scale 1:25 ......................$25 Bobcat S175 Skid Steer Loader, 1:25 Scale ..................................$65 Bobcat S510 Skid Steer Loader, 1:25 Scale ..................................$65 Bobcat S530 Skid Steer Loader, 1:25 Scale ..................................$65 Caterpillar D7E Track-Type Tractor, 1:50 Scale - $90

Bobcat S550 Skid Steer Loader, 1:25 Scale ..................................$65

International TD-14 Crawler Dozer, 1:16 Scale - $150

Bobcat S570 Skid Steer Loader, 1:25 Scale ..................................$65

Caterpillar 740B EJ Articulated Dump Truck w/ Ejector Body, 1:50

Komatsu D65PX-17 Dozer, 1:50 Scale ............................................$80

Bobcat T550 Track Loader, 1:25 Scale............................................$70

Scale......................................................................................................$70

Komatsu D155AX Dozer w/ripper, 1:50 Scale ..............................$95

Bobcat T770 Compact Track Loader, 1:25 Scale..........................$45

Caterpillar 963D Track Loader, 1:50 Scale ....................................$60

Komatsu D375A Dozer, 1:50 Scale................................................$125

Bobcat 225 Compact Excavator, 1:25 Scale..................................$50

Caterpillar 966K Wheel Loader, 1:50 Scale....................................$95

Komatsu D475A Dozer w/ripper, 1:50 Scale................................$160

Case CX250C Excavator, 1:50 Scale ............................................$195

Caterpillar 977 Traxcavator, 1:50 Scale ..........................................$60

Komatsu GD655 Motor Grader, 1:50 Scale....................................$90

Case 95XT Skid Steer Loader (Conrad), 1:32 Scale ....................$60

Caterpillar 988K w/ Grapple, 1:50 Scale ......................................$160

Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........................$80

Case 580 ST Backhoe/Loader, 1:50 Scale ....................................$95

Demag Tracked Paver (NZG), 1:50 Scale ......................................$75

Komatsu HM250 Articulated Dump Truck, 1:50 Scale ................$75

Case 1102 Vibromax Roller, 1:35 Scale ........................................$100

Doosan Moxy MT31 Articulated Truck ........................................$100

Komatsu HM400-3 Articulated Truck, 1:50 Scale ......................$100

Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy Trailer,

Dynapac SD2500 CS Road Paver, 1:50 Scale ............................$150

1:50 Scale ..........................................................................................$100

Grove TM1500 White 12 Axle Truck Crane, 1:50 Scale ............$160

Caterpillar 775G Off-Highway Truck, 1:50 Scale ........................$110

Hamm 3307 Compact Roller, 1:34 Scale ........................................$45

Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale..................$65

Hamm 3414 Pad Foot Compactor, 1:50 Scale ..............................$90

Caterpillar D6K Track-Type Tractor, 1:50 Scale ............................$65

International 175 Crawler Loader, 4in1, 1:50 Scale ......................$65

Caterpillar D7E Track-Type Tractor, 1:50 Scale ............................$90

International 433 Dual Engine Pay Scraper, 1:25 Scale ............$225

Caterpillar D8L Track-Type Tractor (NZG 233), 1:50 Scale..........$75

International 560 Pay Loader, 1:25 Scale ....................................$145

Caterpillar D8T Track-Type Tractor, 1:50 Scale............................$110

International TD-15 Dozer w/Umbrella, 1:50 Scale ......................$60

Caterpillar D9N Track-Type Tractor (NZG 298), 1:50 Scale ........$75

International TD-20E Dozer, 1:64 Scale ..........................................$24

Caterpillar D10N Track-Type Tractor, 1:50 Scale ..........................$50

International TD-25 Dozer w/Ripper, 1:25 Scale..........................$180

Leeboy 8816 Asphalt Paver, 1:50 Scale..........................................$90

Caterpillar D10 Track-Type Tractor (Conrad), 1:50 Scale ..........$185

JCB 3CX Backhoe/Loader, 1:50 Scale............................................$75

Liebherr R916 Litronic Excavator, 1:50 Scale ............................$150

Caterpillar D10T Track-Type Tractor, 1:50 Scale ........................$100

John Deere “BO” Lindeman Crawler Tractor, 1:16 Scale ..........$70

Link Belt 800 X2 Excavator, 1:50 Scale ........................................$200

Caterpillar D11R Track-Type Tractor, 1:50 Scale ........................$100

John Deere 200C LC Excavator, 1:50 Scale ..................................$45

Poclain TC45 Excavator, 1:50 Scale..............................................$140

Caterpillar MH3049 Material Handler w/magnet, 1:50 Scale ....$150

John Deere 315SJ Backhoe/Loader, 1:50 Scale ..........................$45

Vogele 1900-2 Tracked Paver, 1:50 Scale........................$140

Caterpillar 323D L Excavator, 1:50 Scale........................................$90

John Deere 624J Military Wheel Loader, 1:50 Scale....................$40

Vogele MT3000 Powerfeeder, 1:50 Scale ....................................$140

Caterpillar 336D L Excavator, 1:50 Scale........................................$95

John Deere 772CH Motor Grader, 1:50 Scale................................$45

Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ........................$115

Caterpillar D350D Articulated Dump Truck, 1:50 Scale ..............$50

John Deere 959K Track Feller Buncher, 1:50 Scale ....................$90

Volvo EC220D Excavator, 1:50 Scale............................................$115

Caterpillar 365B L Series II Excavator, 1:50 Scale........................$75

Komatsu CK25 Compact Track Loader, 1:50 Scale ....................$45

Volvo L220G Wheel Loader, 1:50 Scale........................................$120

Caterpillar 416B Backhoe/Loader (NZG 285), 1:50 Scale............$70

Komatsu D51 EX Dozer, 1:50 Scale ................................................$85

Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale............................$90

Caterpillar 428 Backhoe/Loader (NZG 2851), 1:50 Scale ............$70

Komatsu D65 EX-17 Dozer w/Ripper 1:50 Scale ..........................$80

Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale ..........$145

Komatsu PC200 Excavator, 1:50 Scale ..........................$160 Komatsu PC490LC-10 Excavator, 1:50 Scale ................ $175 Komatsu WA470-7 Wheel Loader, 1:50 Scale ..............................$75 Komatsu WA500 Wheel Loader, 1:50 Scale ..................................$80 Komatsu WB146 Backhoe/Loader, 1:50 Scale..............................$75 Komatsu WH613 Telehandler, 1:50 Scale ......................................$65 Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ..........$90 Leeboy 785 Motor Grader, 1:64 Scale ............................................$90

Shipping and Handling Included

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 27

Depinet, Montgomery...

Southeastern Equipment Company Hires, Promotes Southeastern Equipment Company recently announced that Dan Depinet has joined the company as the environmental products specialist of Indiana. Depinet is selling Vacall, Schwarze and Aries equipment throughout the state. “We’re excited that Dan is expanding our environmental division into Indiana,” said Charlie Patterson, president of Southeastern Equipment. “His background is an excellent addition to our group. We look forward to seeing the contributions he’ll be making.” Depinet has extensive experience with many types of equipment used in environmental applications. He was employed at a municipality waste plant for 15 years and worked on a sewer cleaning team for the city of Noblesville, Ind. for several years as a class 3 operator and crew leader. In addition to a new hire, Southeastern Equipment Company has promoted Wes Montgomery to sales representative at the Gallipolis, Ohio, location. Montgomery is selling the full line of equipment throughout

Meigs County and handles product support in Gallia, Lawrence and Jackson counties. “We’re excited to welcome Wes to our sales group,” said Patterson. “He’s been a valuable part of the Southeastern team and we look forward to seeing his contributions in this new role.” Prior to joining Southeastern Equipment, Montgomery was a parts delivery driver for two years. He often delivered parts to Southeastern’s service department in Gallipolis, where he met James Rose, service manager at the branch. “I was impressed with Wes and thought he would make a great addition to Southeastern. As soon as a job opened up, I gave him a call. We brought him in for an interview and hired him,” said Rose. Montgomery was a parts associate for a year before his recent promotion. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Southeastern Equipment Co. Promotes Josh Ritter Southeastern Equipment Company recently promoted Josh Ritter to sales representative at the Evansville, Ind., location. Ritter is selling the full line of equipment in Kentucky and most of the brands in Evansville. “Josh is a great addition to our sales team,” said Charlie Patterson, president of Southeastern Equipment. “He’s already proven to be a valuable employee at Southeastern, and we look forward to his success in his new position.” Prior to working at Southeastern, Ritter worked at a remanufacturing facility for a construction equipment company, rebuilding motors. His first position at Southeastern Equipment was as a mechanic for rental equipment at the Indianapolis branch. For more information, visit www.Southeasternequip.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Josh Ritter

Page 28 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LEXINGTON, KY 2180 Old Frankfort Pike P.O. Box 11520 Lexington, KY 40510 859-254-6443 1-800-432-0913

www.wilsonequipment.com

CORBIN, KY 828 W. Cumberland Gap Pkwy. Corbin, KY 40701 606-528-0700 1-800-274-9457

PRESTONSBURG, KY 2124 Watergap Road Prestonsburg, KY 41653 606-874-8036 1-800-955-9457

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 29

.com

2011 CATERPILLAR 247B3, ID# MUC0332, S/N TSL00465, 1943 HOURS, CAB, A/C ........................$35,200

2002 CATERPILLAR 304CCR, ID# NUC0156, S/N WAK00357, 3005 HOURS, CANOPY ....................$19,500

2010 CAT 299C, ID# NUC0128, S/N JSP00798, 2045 HOURS, CAB, AC ........................................................$51,100

2008 CATERPILLAR 247B3, ID# MUC0334, S/N MTL05340, 3984 HOURS, CAB/ A/C ......................$22,300

2005 CAT TH580B, ID# 4CR5600, S/N SLH00488, 1860 HOURS, STABILIZERS ......................................$54,300

2008 CATERPILLAR 272C, ID# NUC0126, S/N# RED01432, 3130 HOURS, CAB, AIR ......................$34,800

2012 CATERPILLAR 289C ID# NUC0122, S/N JMP02797, 1068 HOURS, CAB, A/C ........................$55,400

2008 CATERPILLAR 287C, ID# NUC0080, S/N MAS01333, 4300 HOURS, CAB, AIR ......................$31,500

2010 CATERPILLAR D7E, ID# NBU0033, S/N MDB00198, 3600 HOURS, CAB ............................$350,000

2009 CATERPILLAR 12M, ID# MUC0321, S/N B9F00371, 4870 HOURS, CAB, AIR ......................$144,700

2009 CATERPILLAR 938H, ID# NUC0023, S/N MJC00642, 4570 HOURS ........................................$116,200

2011 CATERPILLAR 336E, ID# NUC0031, S/N BZY00778, 3115 HRS, CAB, HEAT, AIR................$230,100

2008 CAT D6TXL, ID# MUC0312, S/N LAY00759, 8075 HRS, CAB, AIR..................................................$157,100

2012 CATERPILLAR 14M, ID# NUC0061, R9J00536, 4045 HOURS..............................................................$332,500

2009 CATERPILLAR 140M, ID# MUC0313, S/N B9D01851, 6280 HOURS, NICE UNIT ................$144,700

2005 CATERPILLAR 963C, ID# NUC0078, BBD01460, 8665 HOURS ..........................................$93,400

Page 30 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 31

LSC LIGHT TOWER • Kubota D1005bg Engine • Tier 4 Final Emissions • Water Cooling System • 28 Gallon Diesel Fuel System • 6kW Prime Power Rating, 60Hz, 1.OPF • 120 Available Voltage Single Phase 2005 CAT D8T, Stk# 541, 9302 hrs, e/rops, a/c, heat, u/c 50% ............................$245,000 PHONE

KENNY ACTON

(812) 282-2800

(502) 639-4168

(812) 282-2882 FAX 6104 Sable Mill Court, Jeffersonville, IN 47130

EQUIPMENT SPECIALS 2006 CAT 330DL, 7056 hrs, a/c, u/c 65%, New Hyd Pump..........................................$119,000

2005 KOMATSU PC400 LC-7, Stk #518, 7211 hrs, a/c, heat, plumbed ............$145,000

2007 DEERE 400D, Stk #646, 7655 Hrs, 6WD, A/C, Tailgate ............................$165,000

2006 Komatsu PC300LC-7, 5973 hrs, a/c, heat, e/rops, u/c 40%, Stk #428 ............................................................$119,000 2005 Komatsu PC400LC-7, 8145 hrs, a/c, heat, aux hyd, u/c 80%, Stk#357 ............................................................$112,000 2009 Liugong CLG922, 2731 hrs, heat, a/c, u/c 60%, thumb, Stk #568 ......................................................................$69,000 2009 Liugong CLG936, 1830 hrs, A/C, heat, plumbed, u/c 80%, Stk #660 ............................................................$127,000 2006 Cat D8T, 9820 hrs, heat a/c, e/rops, u/c 90%, Stk#647 .. ....................................................................................$269,000 2005 Rosco RB48, 1946 hrs, e/rops, Stk #675............$20,000 2008 Liugong 842llTC, 2312 hrs, a/c, heat, 80% rubber, 2 avail........................................................................$70,000 EA. 2005 Terex TA27-G7, 6695 hrs, e/rops, heat, a/c, 6x6 truck, 2 avail........................................................................$69,000 EA. 2005 Deere 300D, a/c, heat, 6596 hrs, tailgate, rubber 65%, Stk#418 ......................................................................$119,000 2010 LaBounty 2000R, 500 hrs, 3rd member hydraulic processing shear................................................................$79,000

Ask about our GPS Machine Control Equipped Dozers, Graders & Excavators www.JobRentals.com

Call ASC Construction Equipment for Rental Rates at 701.250.4882

Portable Power

Page 32 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ October 11, 2014 â&#x20AC;˘ Page 33

Satisfaction Guaranteed!

SPECIAL 7 FINANCING

SEAL SAVER PROTECTIVE CYLINDER COVER

ZERO DOWN For For one year on NO INTEREST Fabric Structures NO PAYMENTS

YRS

RESTRICTIONS APPL APPLY Y

KOMATSU D65EX-15

Made in the USA

The SEAL SAVER WILL: Protect cylinders from the elements â&#x20AC;˘ Eliminate dings and dents from falling debris â&#x20AC;˘ Reduce particle contamination of hydraulic systems â&#x20AC;˘ Prevent pitting due to chemical washes â&#x20AC;˘ Extend the life of cylinder seals â&#x20AC;˘ Eliminate rod scoring

STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road â&#x20AC;˘ Suite 15 Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

Visit

t 2VJDLMZ FBTJMZ JOTUBMMFE XJUI IFMJDBM QJMFT TIJQQJOH DPOUBJOFST NPSF t &BTZ UP EJTBTTFNCMF BOE SFMPDBUF t -PXFS FOFSHZ DPTUT XJUI OBUVSBM MJHIUJOH t 0OF TUPQ TIPQ PGGFSJOH BMM TFSWJDFT JO IPVTF t #VJMEJOHT VQ UP h XJEF BU BOZ MFOHUI

www.sealsaver.com

for more information or contact us at 1-800-683-5189

fabric structures

Call 1.866.643.1010 and use code ADCEGMW or visit www.ClearSpan.com/ ADCEGMW and we'll send you a free gift.

AEM/AEMP Draft Telematics API Standard Now Available The AEM/AEMP Draft Telematics API (application programming interface) Standard is now available to endusers, including contractors, fleet managers, rental managers and dealers/distributors, as well as OEMs, systems management firms and other interested construction/industrial and related industry professionals. This new industrywide draft standard provides end-users with more OEM equipment data and more convenient access, which allows them to better manage and analyze information across their fleets, and helps them save time and money on the job site or within their operations. The standard is a collaborative effort of the Association of Equipment Manufacturers (AEM) and the Association of Equipment Management Professionals (AEMP), working on behalf of their members and the industry. To achieve a globally recognized standard for conformity worldwide, the AEM/AEMP Draft Telematics API Standard will be submitted for acceptance by the International Organization for Standardization (ISO). Expanded Equipment Data, One Program to Manage Mixed Fleets The AEM/AEMP Draft Telematics API Standard expands the original AEMP Telematics Standard to include 19 data fields (with fault code capability). The Draft API standard also changes how the data is accessed: via an application programming interface (API) with standardized server-to-server communication protocols, so end users with mixed equipment fleets can use their

To achieve a globally recognized standard for conformity worldwide, the AEM/AEMP Draft Telematics API Standard will be submitted for acceptance by the International Organization for Standardization (ISO). own business systems and software without the need to work across multiple telematics provider applications. The Draft API standardâ&#x20AC;&#x2122;s secure internet protocol allows for manufacturer protection of proprietary information; disclosure to third-party companies for the purpose of aggregation is not permitted. Must Sign Up Online to Receive Draft API Standard While access to the AEM/AEMP Draft Telematics API Standard is free, industry professionals must sign up direct-

ly via the AEM or AEMP Web sites to be sent the draft standard and to receive any future updates or additional documentation. AEMP and AEM also encourage participation in the API developer group to ask questions and receive any clarification that is needed. Request access here: https://groups.google.com/d/forum/telematics-standard. The associations caution that while they are making the draft standard available now to help companies become familiar with its contents for business planning purposes, the document is still a work in progress. Final language is dependent upon completion of the ISO acceptance process. More information is available on the AEM and AEMP Web sites - http://www.aem.org/SRT/Technical/Telematics/ or http://www.aemp.org/draft-api/. Up Next: Cranes, Mobile Elevating Work Platforms and Air Compressors Currently telematics data related to crane operations as well as other niche products are excluded from the Draft API standard. Next steps include working on inclusion of crane data fields, followed by mobile elevating work platforms and air compressors. Also, the Draft API standard has not had ag equipment input and therefore cannot be considered an ag equipment-utilized draft standard at this point. AEM is evaluating next steps from an ag sector perspective. (This story also can be found on Construction Equipment Guideâ&#x20AC;&#x2122;s Web site at www.constructionequipmentguide.com.)

Page 34 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

I Make America Harley Tour Stops at Case to Rally Support A nationwide campaign to press Congress to support pro-manufacturing policies rolled through Racine, Wis., on Sept. 26 when the I Make America Harley Tour stopped at Case Construction Equipment. The event was held in conjunction with Case and its Dire States campaign, aimed at finding new ways to invest in infrastructure development at the state and local level. State Representative Robin Vos (speaker of the Wisconsin State Assembly) and State Representative Cory Mason also were in attendance, and spoke as part of a short presentation. The custom-painted 2014 HarleyDavidson Road King has been on the road this year to advocate for public policies that advance the interests of employees, communities and companies of the equipment manufacturing industry. The I Make America Harley has crisscrossed the heartland over the past few months, placing an emphasis on policies important to equipment manufacturers like reauthorizing the Export-Import Bank’s charter or passing a long-term highway bill. The I Make America Harley Tour is part of the I Make America campaign, a broader advocacy effort by the Association of Equipment Manufacturers (AEM). So far, I Make America has registered more than 36,000 grassroots supporters of pro-jobs manufacturing policies. At each stop, eligible employees and attendees of the event can sign up for a chance to win the customdesigned bike; the winner will be announced at AEM’s Annual Conference in November. “I Make America was created to be a force for positive change in the equipment manufacturing industry,” said Dennis Slater, AEM president. “Economic conditions in America remain a challenge and we need our government to partner with us to advance pro-manufacturing policies that address those challenges. I Make America is

(L-R) are AEM President Dennis Slater; Wisconsin State Representative Cory Mason; Case IH Vice President Jim Walker; Wisconsin State Representative and Speaker of the Assembly Robin Vos; CNH Industrial Chief Operating Officer — North America Brad Crews; and Executive Director of the Transportation Development Association of Wisconsin Craig Thompson.

our platform to spread awareness and maximize our voice in Washington, D.C.” According to AEM, about one in six private sector jobs in the United States depends on the manufacturing base. Congress can help to create business conditions that will grow the economy and U.S. manufacturing jobs by encouraging infrastructure investment, protecting U.S. farming and increasing American exports for our economy to keep pace with other countries. “Infrastructure investment is one of the most important domestic public policy issues we face today, but it’s often overshad-

The crowd gathers at the joint AEM and Case event on Sept. 26, 2014, in Racine, Wis.

owed by more emotional issues,” said Jim Hasler, vice president, Case Construction Equipment. “Infrastructure affects all of us. It benefits local economies, lowers logistics costs to attract new business, improves quality of life and of course, there are the obvious benefits to the manufacturing industry, which in turn creates more jobs domestically. Infrastructure investment should be a top priority, and we’re proud to stand with AEM and I Make America on this issue.” Dire States is Case’s own grassroots effort to raise awareness for the role that state and

Crowds sign the “I Make America” Pledge.

local governments play in securing infrastructure investment, through legislative initiatives, public-private partnerships (P3s), state revolving funds and other innovative funding methods. The effort kicked off with a nationwide tour in 2013 and 2014, and has transitioned to an advocacy role, as Case has worked to support infrastructure funding initiatives in Texas and Wisconsin. For more information, visit DireStates.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Pages 35-41

Snow and Ice Section For more information on snow-clearing equipment and spreaders, visit CEG's Web site at www.constructionequipmentguide.com.

Meyer Products Announces New Crossfire Spreader Meyer Products’s Crossfire spreader is the perfect fit for ¾ to 1-ton pick-ups. Available with 6 or 8 ft. (1.8 or 2.4 m) length beds — 1.5 or 2 cu. yds. (1.1 or 1.5 cu m) respectively — the Crossfire comes in two models, standard or DLX with integrated pre-wet system, and has a long list of innovative features that help contractors control snow and ice more effectively than ever before, according to the manufacturer. The Crossfire spreaders feature a double-walled high density polyethylene hopper with a 5-year warranty, plus a 3-year warranty on other parts. Crossfires are driven by two electric motors, a heavyduty ½ horsepower for the onepiece auger and a 1/8 horsepower for the independently controlled spinner. Improve Material Flow A variety of standard features were engineered into both the Crossfire standard and DLX models to improve efficiency while reducing time and material costs. A new material delivery system was developed that includes a hopper screen, tapered v-plate, heavyduty vibrator and auger that work together to deliver material more efficiently and evenly. “In wet or freezing conditions, compromised material flow can really slow you down,” said Meyer President Andy Outcalt. “That’s why we took material flow to a new level with the Crossfire.” Built-in Pre-wet System The Crossfire DLX improves material delivery with a built-in pre-wet system that helps speed up the melting process and reduces material bounce when it hits the pavement. This means contractors can apply liquid-activated material more precisely, while reducing the

The Crossfire comes in two models, standard or DLX with integrated pre-wet system.

amount of material used by up to 30 percent. The 8-ft. (2.4 m) hopper holds up to 200 gal. (757 L) while the 6-ft. (1.8 m) holds up to 275 gal. (1,041 L). DLX: Ground-Speed Control The DLX version also features a deluxe in-cab controller with ground-speed control, which automatically adjusts the speed of the auger to the speed of the vehicle,

making it easy to spread the same amount of material at various vehicle speeds. Better By Design The full width hopper reduces material spillage into the vehicle bed, and tarp management is quicker and easier with built-in tarp hooks. Adjustable dual baffles control material placement, and the 40 ft. (12 m) spread width makes it

easy to cover large lots or work areas. With an integrated work light to illuminate the spread area, the Crossfire makes routine maintenance fast and easy. Recessed lifting pockets make it easy to install or remove the Crossfire from the vehicle. The spinner assembly requires no tools for removal and is protected from road grime with a form-fitted stainless steel cover. The easy-to-remove rear panel

protects the auger motor from salt and debris while the auger is held in place with a maintenance free poly-bearing. And when winter’s over, the Crossfire can be stored on its end, saving valuable storage space. For more information, visit www.meyerproducts.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 36 • October 11, 2014 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

Boss Snowplow Adds Mid-Size UTV Plow Featuring High Blade Lift Height Designed for mid-size UTV models including the Polaris RZR and Yamaha Rhino, a new 5 ft. (1.5 m) UTV plow from Boss Snowplow features fully hydraulic operation. No winches, pulleys or handles are needed for improved speed, reliability and efficiency. Boss offers a high blade lift height for increased snow stacking capability. The plow blade skin is made from tough, rust-resistant poly for durability, crack resistance and slickness. In addition, a sloped-profile undercarriage provides additional ground clearance.

Meyer’s Road Pro 32-Series plow is specifically designed for 10,000 to 26,000 GVW vehicles and includes Meyer’s EZ-Mount Plus system for easy attaching and detaching in seconds.

Meyer Unveils New Road Pro 32-Series

Meyer Products’s new line of snow plows is designed specifically for full-sized pick-up trucks and medium-duty trucks used to clear side streets, big parking lots and cul-desacs. Meyer’s Road Pro 32-Series plow, is specifically designed for 10,000 to 26,000 GVW vehicles and includes Meyer’s EZ-Mount Plus system for easy attaching and detaching in seconds. Custom mounts also are available. Featuring Meyer’s leading 5-year warranty, the Road Pro 32 is available in 8, 9 and 10 ft. (2.4, 2.7 and 3 m) lengths. The plow uses Meyer’s E-72 hydraulic system for up/down/left/right motion or it can be used with a vehicle’s central hydraulics. Meyer said municipalities and larger conincluded the 304 stainless steel grade tractors will benefit the most from the Road Pro 32-Series as on the plow for a high level of corro- large pick-ups and medium-duty trucks are being used more sion resistance. It can take hard impact often to clear city streets or larger lots. and the low friction material doesn’t The Road Pro 32 is operated using Meyer’s EZ-1 congouge or scratch easily while the snow troller featuring hands-free plowing (HFP) to reduce effort rolls off the ultra smooth 304 stainless and increase performance and safety. When activated, HFP steel surface.” uses the vehicle’s shift level to control the up/down moveSnowDogg SKTE Series plows also ment of the blade, so you can keep your eyes on the job, not include the snow deflector and plow on the controller. shoes as standard equipment. Other Road Pro-32 features include. For more information, call 440/974• 32 in. (81 cm) high, 75-degree attack angle for better 8888 or visit plowing and scraping www.buyersproducts.com. • Heavy-duty bracing and tubular construction for added (This story also can be found on strength Construction Equipment Guide’s Web • Adjustable snow shoes to set scraping height site at www.constructionequipment• Heavy-duty 2 by 12 in. (5 by 30.5 cm) hydraulic rams guide.com.) • Heavy-duty A-frame and pivot bar • Six heavy-duty trip springs and eight vertical ribs for added durability • Optional ground tracking technology, which pivots the The SnowDogg SKTE Series is available in 8- and 9-ft. (2.4 and moldboard 12-degrees in either direction, allowing the plow 2.7 m) widths. The swiveling A-frame to automatically follow the contour of the road and clean surand trip-edge design of the faces in one pass. SnowDogg skid-steer plows allow For more information, visit www.meyerproducts.com.

SnowDogg Includes Skid-Steer Plow From SKTE Series as Latest Addition The new skid-steer plow from the SKTE Series of SnowDogg plows is the latest addition to the expanding SnowDogg line from Buyers Products. With a heavy duty, robust design and universal skid-steer mount, the small but mighty SnowDogg SKTE Series is available in 8- and 9-ft. (2.4 and 2.7 m) widths for

the most demanding environments. The swiveling A-frame and trip-edge design of the SnowDogg skid-steer plows allow the driver to adapt for challenging and changing surface conditions. “We developed the new SnowDogg skid-steer plow series to work safely and effectively with a swiveling Aframe configuration to follow the contour of the road,” said Dave Zelis, director of sales and marketing at Buyers Products. “We listened to the positive reaction of our customers and

the driver to adapt for challenging and changing surface conditions.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 11, 2014 • Page 37

Page 38 • October 11, 2014 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

TRIPLE THREAT. NOTHING’S TOUGHER, SMARTER OR FASTER than THE BOSS XT line of plows, including the NEW Poly Power-V XT. A rock-solid combination of professional-grade toughness, Power-V versatility and super-slick poly efficiency, the newest XT is unlike any plow in the industry. But that’s no surprise coming from THE BOSS. We’ve been driving the industry forward for 24 years with products that make your job faster and easier. Simple as 1-2-3. STOP IN TODAY!

Flink FXP Plow Expands With Flip of a Lever

THE BOSS XT PLOWS: • NEW Poly Power-V XT… 8'2" 9'2" • Steel Power-V XT……… 8'2" 9'2" • Super-Duty XT…………. 8'0" 8'6" 9'0" • Taller blade and enhanced curl • 37" tall flared blade wings on Power-V models • High-performance cutting edge • SmartHitch ® 2 • SmartLight ™ 2 9'2" • SmartTouch ® 2 • SmartShield ® 8'6" 9'0"

• T

CANNON TRUCK CRYSTEEL TRUCK ( D E A L E R I M P REQUIPMENT INT) EQUIPMENT 51761 Danview Technology Court 52248 Ember Rd. Shelby Twp., MI 48315 Lake Crystal, MN 56055 586-991-0054 507-726-6041 Fax: 586-991-0074 800-722-0588 ©2009 BOSS Products/Northern Star Industries, Inc. www.cannonequip.com Fax: 507-726-2984 1130 73rd Ave. N.E. Fridley, MN 55432 763-571-1902 800-795-1280 www.crysteeltruck.com ©2009 BOSS Products/Northern Star Industries, Inc.

b o s s p l o w . c o m

The Flink FXP plow expands horizontally from 11 to 17 ft. (3.3 to 5.2 m) at the flip of a lever. The right and left sides move independently of each other and there are no pivot points. Designed for large lots and highways, the plow is placed out in front for better visibility, safety and control. For more information, call 815/673-4321 or visit www.flinkplows.com.

H I G H - P E R F O R M A N C E C O M M E RCIAL PL OW S

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 11, 2014 • Page 39

TOPPERS PLUS 1929 East Madison Ave. Mankato, MN 56001 507-387-7376 800-321-7587 www.toppersplus.com

TRIP-EDGE

C-PLOWS

VF Series New! Flare-wing, Trip-edge V-Plow

STRENGTH & PERFORMANCE TRIP-EDGE

SCOOP PLOWS

Hiniker offers a comprehensive line of professional grade snowplows to meet the demands of the toughest conditions and snowplow operations.

2770 5th Ave S., Fargo, ND 58103 701-241-9411 800-972-9250 www.truckutilities.com

VF-PLOWS: Trip-edge design gives smooth operation and effective protection with a nine-inch high pivot point. Double acting cylinders provide positive moldboard position control. Now available in flared-wing and flat-top configurations. TRIP-EDGE

CONVENTIONAL PLOWS

C-PLOWS: Get the heavy-duty performance of the Hiniker trip-edge conventional plow plus the added versatility of a high performance backdrag plow. An amazing time-saver in driveways, parking lots and loading docks. SCOOP PLOWS: High capacity concave shape captures snow to efficiently clear lots and parking areas. Angles left or right for conventional plowing.

FULL-TRIP

CONVENTIONAL PLOWS

SPREADERS

TRUCK UTILITIES 2370 English St., St. Paul, MN 55109 651-484-3305 800-869-1075

CONVENTIONAL PLOWS: 30 inch tall high-curvature blades roll deep snow off quickly and efficiently. Commercial plowers will appreciate the extra strength and efficient design.

NORTH CENTRAL TRUCK & EQUIPMENT 2629 Clearwater Road St. Cloud, MN 56301 732 30th Avenue SE Minneapolis, MN 55414 877-485-9595 www.northcentralinc.com

SPREADERS: Snow removal contractors looking for additional profits will find them in ice control. Spread ice control materials quickly and easily with an efficient Hiniker Spreader. Choose between OHV gas engine spreaders or dual-motor electric spreaders.

DUAL-MOTOR ELECTRIC

SPREADERS

HINIKER COMPANY cw w B cd © GCNFFCJIICKLHF © DhinikerDy

TRUCKIN’ AMERICA 4720 Hwy. 52 N. Rochester, MN 55901 800-556-4720 507-285-9855 www.truckinamerica.com

Page 40 • October 11, 2014 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

M E Y E R P R O D U C T S AVA I L A B L E AT:

ILLINOIS Bonnell Industries Inc, Dixon 815-284-3819 Paris Machine, Paris 217-465-3360 WJN Enterprises Inc, Tinley Park 815-464-4800 Nite Equipment Inc, Pecatonica 815-239-9096 Bus Andrews Equipment, Springfield 417-869-1541 R.A. Adams Enterprises Inc, McHenry, 815-385-2600 INDIANA Hayward, Wholesale Distributor 800-282-1585 McGavic Outdoor Power Equipment, Kokomo 765-457-7182 Plainfield Equipment, Plainfield 317-839-2448 Pyramid Equipment Inc, Rolling Prairie 219-778-2591 Tri State Line-X & Accessories, Angola 260-665-5959 McGavic Outdoor Power Equipment, Marion 765-651-9811 IOWA Stellar Truck & Trailer, Mason City 855-423-7107 Hiway Truck Equipment, Fort Dodge 515 576-2299 School Bus Sales Co, Waterloo 319-296-1363 KANSAS Central States Thermo-King, Kansas City 913-371-0868 Mynatt Truck Equipment, Olathe 913-829-6787 JCentral States Thermo King Inc, Wichita 316-744-2061 KENTUCKY Hayward, Wholesale Distributor 800-282-1585 Manning Equipment, Louisville 502-426-5210 Tebco Of Kentucky Inc, Richmond 859-624-0653 MICHIGAN Hayward, Wholesale Distributor 800-282-1585 Automotive Service Co., Jackson 517-784-6131 Owosso Hitch & Plow Center Inc, Owosso 989-725-9977 Professional Parts Warehouse, Muskegon 231-777-2001 MINNESOTA Northwoods Hydraulic & Equipment Inc, Moose Lake 218-485-4850 Leroys Custom Truck, Ham Lake 763-757-5326 MISSOURI Kranz Automotive Body Co., St Louis 314-776-3787 Kranz Of Kansas City, Kansas City 816-231-9995 Riechers’ Truck Body & Equipment Co., Washington 636-239-3700 NEBRASKA Rod’s Power Sports, Roca 402-423-6230 OHIO Hayward, Wholesale Distributor 800-282-1585 Ace Truck Equipment Co, Zanesville 740-453-0551 Ace Truck Body Inc, Grove City 614-871-3100

OHIO (CONTINUED)

SOUTH DAKOTA

Cenweld Corp. - Truck Bodies & Equipment, Cuyahoga Falls 330-923-9717

River City Body Co., Cincinnati 513-772-9317

Time Equipment Rental & Sales, Rapid City 605-348-2368

Chuck’s Custom Truck & Trailer, Medina 330-723-6029

Southeastern Equipment Co., Cambridge 740-432-6303

Coia Implement Sales, Ravenna 330-296-5280

Wellington Implement, Wellington 440-647-3725

WISCONSIN

Cross Truck Equipment, Canton 330-477-8151

Buckeye Body & Equipment, Columbus 614-299-1136

Wisconsin Body & Hoist, Chippewa Falls 715-723-3223

JTI Inc, Oakwood Village 440-232-4311

The Gledhill Road Machinery Co., Galion 419-468-4400

Kalida Truck Equipment Inc, Kalida 419-532-3919

Kalida Truck Equipment Inc, Walbridge 419-666-3700

Myers Equipment Corp., Canfield 330-533-5556

Zoresco Equipment, Oakwood Village 440-359-1010

Pengwyn, Columbus 614-488-2861

Zoresco Equipment Co., Monroe 513 360-2929

Principal Truck Supply, Columbus 614-272-6644

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 11, 2014 • Page 41

M E Y E R P R O D U C T S AVA I L A B L E AT:

OHIO (CONTINUED)

SOUTH DAKOTA

Cenweld Corp. - Truck Bodies & Equipment, Cuyahoga Falls 330-923-9717

River City Body Co., Cincinnati 513-772-9317

Time Equipment Rental & Sales, Rapid City 605-348-2368

Chuck’s Custom Truck & Trailer, Medina 330-723-6029

Southeastern Equipment Co., Cambridge 740-432-6303

Coia Implement Sales, Ravenna 330-296-5280

Wellington Implement, Wellington 440-647-3725

WISCONSIN

Cross Truck Equipment, Canton 330-477-8151

Buckeye Body & Equipment, Columbus 614-299-1136

Wisconsin Body & Hoist, Chippewa Falls 715-723-3223

JTI Inc, Oakwood Village 440-232-4311

The Gledhill Road Machinery Co., Galion 419-468-4400

Kalida Truck Equipment Inc, Kalida 419-532-3919

Kalida Truck Equipment Inc, Walbridge 419-666-3700

Myers Equipment Corp., Canfield 330-533-5556

Zoresco Equipment, Oakwood Village 440-359-1010

Pengwyn, Columbus 614-488-2861

Zoresco Equipment Co., Monroe 513 360-2929

Principal Truck Supply, Columbus 614-272-6644

Page 42 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 43

Howell Tractor 480 Blaine Street Gary, IN 46406 800/852-8816 Fax: 219/977-4220

Illinois Truck & Equipment www.iltruck.com 320 Briscoe Drive Morris, IL 60450 815/941-1900 Fax: 815/941-1486

Kelbe Brothers Equipment Co., Inc. www.kelbebros.com 12770 W. Silver Spring Drive Butler, WI 53007 262/373-2151 Fax: 262/373-2102 4621 Dutch Mill Rd Madison, WI 53716 608/221-8300 Fax: 608/221-0610 3101 French Rd. De Pere, WI 54115 920/343-6496 Fax: 262-781-9671

Grand Equipment Company Mid Country Machinery 3478 5th Ave South (Bus. Hwy 20) Fort Dodge, IA 50501 800/206-5936 4734 Sergeant Rd. (Hwy 63) Waterloo, IA 50701 319/234-8710 106 8th Street Sergeant Bluff, IA 51054 712/943-4470

Custom Truck & Equipment www.customtruckandequipment.com 7701 E. 24 Highway Kansas City, MO 64125 800/861-1065 816/241-4888 Fax: 816/241-8826 2121 Stephens Blvd Joplin, MO 64804 417/659-8969 Fax: 417/659-8871

www.grandequipment.com 3310 Hudson Trail Dr. Hudsonville, MI 49426 616/896-7700 Fax: 616/896-6700

Construction Machinery Company www.cmcky.com 2911 S. English Station Rd. Louisville, KY 40299 502/267-4020 866/901-2262 Fax: 502/261-9251 2235 Ragu Drive Owensboro, KY 42303 270/683-2000 877/683-2262 Fax: 270/683-3727 267 W. Jay Louden Rd. Carrollton, KY 41008 502/732-4661 Fax: 502/732-8355

Page 44 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ARTBA Honors Outstanding Efforts to Improve Safety in Roadway Work Zones American Road & Transportation Builders Association’s Transportation Development Foundation (ARTBA-TDF) recognized six private sector organizations for their commitment to promoting safety during the association’s 16th annual “Roadway Work Zone Safety Awareness Awards.” The awards were presented at a Sept. 8 luncheon during ARTBA’s National Convention in Rancho Palos Verdes, Calif. The competition recognizes outstanding programs, campaigns and technologies aimed at helping reduce roadway work zone accidents, injuries and fatalities. Winners were announced in three categories: Outreach Campaigns: Recognizes efforts that promote roadway work zone safety through implementation of employee and/or public education campaigns on a national, state or local level. Training Programs: Honors national, state and local educational programs that promote worker safety on the job site. Innovations in Technology: Recognizes the important role that technology plays in improving safety in and around work zones with innovative products and methodologies or innovative applications to existing products and methodologies. Outreach Campaign/State Level — DBi Services LLC: “Billboard and Student Driver Outreach” In conjunction with National Work Zone Safety Awareness Week, DBi Services sponsored a series of billboard ads and roadway message boards to remind the motoring public of the importance of driving carefully in road construction zones. The billboards appeared along stretches of I-75 in Fort Meyers, Fla., and had the potential to reach 68,000 motorists per day. DBi employees distributed more than 1,000 work zone safety “fact sheets” at rest areas near construction sites and in an effort to educate new drivers on the need to drive cautiously, the company also sponsored industry expert presentations to high school students about the dangers of driving in work zones. Outreach Campaign/State Level — Granite Construction Company and Dannenbaum Engineering Corporation: “Chisholm Trail Parkway Section 6 Design-Build” Granite Construction Company and Dannenbaum Engineering Corporation found an innovative way to protect workers and the traveling public while accelerating the construction schedule of Section 6 — a 13.1 mi. (21 km), $182.5 million design-build segment of the 27.6 mile Chisholm Trail Parkway in Johnson and Tarrant Counties in Texas. The project, constructed in a Texas Super 2 configuration, required careful consideration of median barrier placement, stopping sight distances, passing lanes configurations and railroad overpass design services. The project team installed a barrier concept that provided protection to the opposing traffic and eliminated the possibility of cross over head on collisions. They implemented an onsite Construction Safety Program, which incorporated daily “Take 5” meetings, Job Hazard Analyses, weekly safety meetings, and also made job-specific orientation and training courses mandatory. As of June 30, 2014, Section 6 has recorded zero fatalities and has an OSHA Recordable Incident Rate of 2.24 — well below the national average of 3.4.

Outreach Campaign/Local/Regional Level — Transurban-Fluor, AAA Mid-Atlantic, and 95 Express Lanes: “Orange Cones. No Phones.” Since 2009, Transurban-Fluor and AAA Mid-Atlantic have been generating awareness of the dangers of distracted driving in a constantly changing construction zone with its “Orange Cones. No Phones.” campaign in Virginia. The effort aims to reduce work zone related incidents caused by motorists who use their cell phones while driving along the heavily-congested I-95 corridor. The program incorporates a series of TV and radio public service announcements, internet ads, social media posts, news conferences, distribution of safety materials, and installation of “Orange Cones. No Phones.” roadway signs along the project corridor. Training Programs/National Level — Oldcastle Materials Inc.: “Best Practices for Mitigating Effects of Work Zone Intrusions Guide & Training Program” Oldcastle Materials put together an experienced safety team with in-depth knowledge of work zone traffic control “best practices” to develop a reference guide book and training program that aims to limit injuries from vehicle intrusions in work zones. The company’s manual, “Best Practices for Mitigating the Effects of Work Zone Intrusions,” provides front-line supervisors, crew leaders and others responsible for work zone set-up with recommendations, standards, typical applications and products to help raise the level of protection of workers on site. Innovations in Technology/Products ILLUMAGEAR Inc.: “The Halo Light” The Halo Light, developed by technology lighting firm Illumagear, is a Personal Active Safety System that protects workers in low visibility, high-risk work zones. The product is portable, hands-free and incorporates a band of LEDs that easily attach to standard hard hats producing a ring of light and enabling the wearer to see and be seen up to a quarter mile away in all directions at all times. The Halo light is powered by a rechargeable battery that lasts up to 12 hours and provides four sets of lighting options. The technology provides transportation construction workers with an added layer of safety protection equipment in vulnerable conditions. Innovations in Technology/Process — Royal Truck & Equipment: “Mobile Safety System and TMA Trucks” In 2014, Royal Truck & Equipment, the largest manufacturer of TMA/Attenuator Trucks in North America, released an integrated technology package called “Mobile Safety System” for its TMA Trucks. Although TMA trucks act as protective crash barriers that prevent vehicles from entering a work zone and injuring workers on the job site, they do not provide real time feedback or early warning signs to operators. With Royal’s new Mobile Safety System, attenuator trucks are now equipped with important pieces of safety technology — radar speed notification system, mini-changeable message system, backup camera system and black box recording system — that effectively encourages lower driving speeds, increases driver awareness and most importantly, protects workers from direct exposure to the dangers of highway construction. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

IOWA

MICHIGAN

ZIEGLER CAT Altoona 800-342-7002 Atlantic 877-547-3819 Sioux City 712-252-4401 Fort Dodge 800-342-1848 Mason City 800-342-1849 Postville 800-526-0889

MILLER-BRADFORD & RISBERG, INC. www.miller-bradford.com Negaunee 800-562-9770

KENTUCKY DIAMOND EQUIPMENT www.diamondequipment.com Bowling Green (270) 781-1061 OHIO CAT www.OhioCAT.com Richwood (888) 446-4658 WILSON EQUIPMENT CO. www.wilsonequipment.com Corbin (606) 528-0700 Lexington (859) 254-6443 Prestonsburg (606) 874-8036

MINNESOTA ZIEGLER CAT www.ZieglerCAT.com Minneapolis (800) 352-2812 Brainerd (877) 829-9850 Buhl (800) 446-9795 Columbus (866) 982-5656 Crookston (800) 422-5782 Duluth (800) 421-3831 Fergus Falls (800) 346-7649 Jackson (866) 847-6401 Marshall (800) 325-4929 North Mankato (877) 845-3938 Rochester (800) 247-1068 Shakopee (800) 352-2812 St. Cloud (800) 522-9469

OHIO OHIO CAT www.OhioCAT.com Broadview Heights (800) 837-6200 Sharonville (888) 332-4658 (Sales & Service) (888) RENT-441 (Rental) Columbus (888) 441-4658 (Sales & Service) (888) RENT-441 (Rental) Perrysburg (888) 339-4658 (Sales & Service) (888) RENT-441 (Rental) Troy (888) 330-4658 Youngstown (800) 837-6203 Cadiz (800) 837-6204 Canton (800) 837-6207 Zanesville (800) 837-6205 N. Canton (888) 736-8443 Oakwood Village (800) 633-1020

WISCONSIN MILLER-BRADFORD & RISBERG INC. www.miller-bradford.com Sussex 800-242-3115 Madison 800-585-7219 Eau Claire 800-585-7232 DePere 800-638-7448 Abbotsford 888-886-4410

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 45

ILLINOIS BIRKEY'S CONST. EQUIPMENT construction.birkeys.com Galesburg (309) 341-4360 Bloomington (309) 827-0520 Mattoon (217) 235-3158 Urbana (217) 337-1781 DIAMOND EQUIPMENT www.diamondequipment.com Mt. Vernon (618) 242-2273 WEST SIDE TRACTOR SALES www.westsidetractorsales.com Naperville (630) 355-7150 Rockdale (815) 730-9011 Rockford (815) 961-3160 South Holland (708) 331-6362 Wauconda (847) 526-7700

INDIANA DIAMOND EQUIPMENT www.diamondequipment.com Evansville (812) 425-4428 MACALLISTER MACHINERY SALES/RENTALS www.macallister.com Indianapolis (317) 545-2151 Indianapolis (317) 244-RENT (7368) Fort Wayne (260) 483-6469 (heavy equip.) (260) 969-3322 (rental store) Lafayette (765) 449-8191 (heavy equipment) (765) 446-5600 (rental Store) Terre Haute (812) 478-3155 (heavy equipment) (812) 231-6000 (rental store) South Bend (574) 288-6622 Washington (812) 254-1712 Bicknell (812) 735-0286 Bloomington (812) 349-9220 Fishers (317) 598-9700 Greensburg (812) 663-5829 Richmond (765) 966-0626 Yorktown (765) 759-2CAT (2228)

Page 46 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

McCann Treats Guests With Good Food, Drinks, Drawings MCCANN from page 8

Towmaster Sales Representative Russ Woelke (L) shows the features of this Towmaster TC-20 trailer to Ken Hostert of Hostert Brothers Excavating. (L-R): Mark Kruepke and Dennis Tovar, both of McCann Industries, welcome Dan Davies of Earthwerks Inc. to the Oktoberfest open house in Bolingbrook, Ill.

(L-R): Rodney Hill and Tim Murphy, both of Paladin Attachments, with Ryan Korbar, Bryan Scofield and Dan Malarik of the city of Portage. (L-R): Paul Kindelspire; Takeuchi; Brent Thelen, Arnie’s Excavating; and Jeff Vodnik, also of Takeuchi, in front of the Takeuchi TL12 compact track loader.

John Pittman (L), Abel Concrete, gets instructions from Jamie May, McCann Industries, for the dice roll competition.

Tom Loucks (far R), McCann Industries, shows the Case 850M dozer to Tom (L) and Kevin Scharringhausen of Elliot Construction.

(L-R): John Conquest, McCann Industries, shows the equipment demo area to James Tamm and Nate Isadore, both of Isadore Enterprises. see MCCANN page 76

SECTION

Trucks & Trailers Pages 47-55

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Hitachi Introduces EH1100-5 Rigid Frame Dump Truck Hitachi Construction Machinery introduced the latest version of the EH1100 rigid dump truck, the EH1100-5. Sales of this latest version of the EH1100 commenced globally as of April 1, 2014. Many successful legacy features are continued on the EH1100-5, such as the long-life and highly compressible NeoconE/Helium suspension strut fluid, the robotically welded fully fabricated box section frame, the highly stable trailing arm front suspension and the reliable body floating hinge pin design; all features included on Hitachi rigid frame trucks regardless of size. This latest version of the EH1100 includes improvements to the operator environment, increased machine serviceability, increased payload, more remote monitoring capability, to name a few, plus many additional features to satisfy our range of customer requirements globally. Operator Environment • Similar to the large Hitachi mining trucks and shovels, the EH1100-5 is equipped with a 10 in. (25 cm) LCD display to provide the operator with information regarding hauling performance and systems condition. • Offsetting the LCD display to slightly right of the steering column allows the lowering of the dashboard in front of the operator for better visibility to the front of the truck. • Truck systems communication via CAN bus allows rear view camera monitoring through the LCD display and reduces the amount of wiring required throughout the truck. • The cab ROPS structure has been redesigned to meet the requirements of using the EH1100-

Body and Payload • The EH1100-5 body is now designed to a volume of 54 cu. yd. (41.5 cu m) SAE Heap 2:1 — and has a flat floor-plate for more control of material shed while dumping. • The nominal payload recommendation for a standard equipped EH1100-5 is 70 tons (63.5 t). Brakes and Retarding • The EH1100-5 rear wet disc brake assemblies now include an integral wet disc parking brake. • While redesigning the rear wet brakes, Hitachi added brake surface area to increase service braking and retarder horsepower.

This latest version of the EH1100 includes improvements to the operator environment, increased machine serviceability, increased payload, more remote monitoring capability, to name a few.

5 as a water truck. • Three point seat belts are built into each type of seat Hitachi offers on the EH1100-5. • A mechanically hinged hand rail at the front of the cab can be positioned to provide the operator with optimum haul road visibility while the truck is in operation, or positioned to provide fall protection during cab area service. • Operator noise exposure has been significantly reduced through the use of cab sound material and exhaust system modifications. Machine Access and Serviceability • Many steering and brake system valves and test ports have been relocated from the mid-frame of the truck to the service deck of the

truck for easier service and troubleshooting access. • The steering filter is now located outside of the frame allowing service personnel the same ground level service access as is offered with the hoist filter. • The two high capacity 12 volt batteries have been moved to the front bumper for ground level access. • Electronic maintenance and troubleshooting is available in various languages using the operators LCD in the cab. • Two body prop pins replace the single prop cable that has been the only means of propping the body up in the past. • The 24 volt relay box and circuit disconnect are located at ground level for easy service

access. • Two diagonal stairways now offer easier access to the operators cab and to the service deck. Powertrain • A selection of two high performance EPA Tier II/E.U. Stage II engines is offered to the global market. For the market outside of North America, customers can choose between an MTU Series 2000 engine and a Cummins QSK23 engine. Within North America, choice is limited to the Cummins QSK23 engine. • The H6620A model automatic transmission offered by Allison offers improved shift quality, less shifting when empty, and upgraded components all resulting in longer life before rebuild.

Technology and Software • The EH1100-5 active traction control system has been refined to better control wheel spin in wet and muddy conditions resulting in improved haul cycle times and increased production. • A transmission optimum shift range has been developed to automatically alter the transmission range according to payload results provided by on board payload weighing system. • All EH1100-5 trucks are equipped with a DLU (data logging unit). This allows remote monitoring of the truck via satellite, Wi-Fi and Wenco. • Hitachi now offers a speed limit feature that automatically restricts the truck top speed to a customer determined limit. This feature will automatically apply the retarder to control the set speed limit if the limit is exceeded while travelling downhill. For more information, visit www.hitachiconstruction.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 48 • October 11, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

XL Trailer Introduces New 130 HDG Multi-Axle Trailers Rated at 130,000 lbs. (58,967 kg) capacity overall and 130,000 lbs. in 10-ft. (3 m) concentrated, the XL 130 Hydraulic Detachable Gooseneck (HDG) multi-axle trailer is perfect for hauling larger construction equipment. The hydraulic multi-axle unit includes a three-axle trailer, two-axle east coast booster, and two-axle jeep (with a pin on axle on the jeep). The jeep is designed for higher versatility and allows for a better load distribution. The XL classic-style hydraulic gooseneck is 12 ft. 5 in. (3.8 m) long and includes a 49-in. (124 cm) fifth wheel height with seven ride height positions as well as a 72-in. (183 cm) flip neck for the two-axle jeep. The main deck is 9 ft. (2.7 m) wide and has a length of just over 26 ft. (7.9 m) with a ground clearance of 8 inches. The width of the main deck can be extended to 11 ft. (3.3 m) with 12 in. (30.5 cm) heavy-duty removable swing out outriggers. The main deck also is outfitted with five bent D-rings and four pan-style D-rings per side and 31-in. (79 cm) front flip ramps. An open boom trough goes into a 5-ft. (1.5 m) bucket well with a steel plated bottom on the rear bridge for added durability, and the design also allows the boom to be knuckled

The XL classic-style hydraulic gooseneck is 12 ft. 5 in. (3.8 m) long and includes a 49-in. (124 cm) fifth wheel height with seven ride height positions as well as a 72-in. (183 cm) flip neck for the two-axle jeep.

under without hitting or damaging the cylinder. The deck also features 1 ¾-in. (4.4 cm) raised apitong decking — a wood stronger than oak. The rear deck is 14 ft. 2 in. (4.3 m) long with a loaded deck height of 43 in. (109 cm) and includes a battery back up for the strobe lights. The trailer has an airlift on the third axle to reduce wear and frame reinforcement for the two-axle booster. The rear deck

also possesses raised heavy-duty load-bearing wheel covers for equipment to be parked on. For extra versatility, the XL 130 HDG connects different ways for scaling with an east coast booster and can be run as a fiveaxle, 3 + 2, or 4 + 1. “The new XL 130 HDG multi-axle trailer is flexible, versatile, rugged and incredibly durable for a variety of offerings in the

construction market,” said Rodney Crim, director of sales at XL Specialized Trailers. “We at XL Trailers greatly value our customers, and this is another example of us meeting customers’ needs. For more information, visit xlspecializedtrailer.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Hendrickson Introduces Global Version of HAULMAAX Hendrickson Truck Commercial Vehicle Systems has launched a global version of the HAULMAAX rear suspension system. Offered in a 21-ton (19 t) capacity, the global HAULMAAX was designed specifically for those applications where light weight, durability and driver comfort are essential. Through its design, higher strength materials and advanced manufacturing methods, HAULMAAX’s weight is greatly reduced. Proven with extensive vehicle durability and laboratory testing, HAULMAAX delivers the reliability, quality and low maintenance customers have come to expect from Hendrickson, according to the manufacturer. In addition, HAULMAAX utilizes elastomeric bolster springs and a progressive load spring (PLS) that work in synergy to provide improved ride quality when the truck is empty. As payload increases, the PLS further engages and functions together with the elastomeric bolster springs as they compress to provide the additional stability vocational applications need. HAULMAAX addresses the lower-end capacity ranges of the global truck market and rounds out Hendrickson’s portfolio of elastomeric solutions that have been introduced over the last four years. In 2010, Hendrickson introduced the HUV vocational rear suspension system at 27 ton (24.5 t) to address the global mid-range capacity market. In 2013,

to 33.5 t) and 40 to 48 ton (36 to 43.5 t) solutions respectively. Both HUV and ULTIMAAX are characterized by designs that provide durability and weight savings for increased payload compared to traditional suspension designs. Both also carry a distinct elastomeric spring design that not only helps provide an ideal balance of empty ride quality and loaded stability, but also protects the chassis, cargo and body equipment from excessive vibration and road shock due to potholes and other road inconsistencies. “HUV and ULTIMAAX addressed the needs of specific customer segments, and raised the bar for durability and performance for heavy truck suspensions across the The globe,” said Matt Joy vice presiglobal HAULdent and general manager of MAAX was designed Hendrickson Truck Commercial specifically for those applications where light weight, duraVehicle Systems. “With the launch bility and driver comfort are of HAULMAAX, we’re rounding out our essential. offering of superior elastomeric solutions which continue to provide innovative ride solutions to advance the global commercial transportation industry.” For more information, call 630/910-2800 or visit www.hendrickson-intl.com.

Hendrickson introduced ULTIMAAX to serve not only the mid-range capacities but also the more extreme, higher capacities with 27 to 37 ton (24.5

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • October 11, 2014 • Page 49

Vermeer Sales & Service

Farm-Rite Equipment Inc.

1675 126th St. West Burnsville, MN 55337 952-890-6144 Fax: 952-882-2980 www.vermeerofminnesota.com

901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857 www.farmriteequip.com

Midwest Trailers Plus, Inc. 548 29th St. West Des Moines, IA 50265 515-223-8463 Toll Free: 888-560-2787 Fax: 515-223-6446 www.midwesttrailersplus.com

K.C. Bobcat 2209 W. 40 Highway Blue Springs, MO 64015 800-697-4228 Fax: 816-229-7631 Olathe, KS 800-598-4228 Platte City, MO 800-984-3001

McCann Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 • Fax: 630-627-8711 Bolingbrook 250 East Frontage Road Bolingbrook, IL 60440 630-739-7770 • Fax: 630-739-7699 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 • Fax: 312-421-3502 Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 • Fax: 708-597-9945

McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 • Fax: 815-385-2975 Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 • Fax: 219-865-0269 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 • Fax: 847-526-9448 www.McCannOnline.com

Titan Machinery Shakopee Division 6340 Hwy 101 Shakopee, MN 55379 952-445-5400 • 800-795-9274 Fax: 952-445-0365 Duluth Division 4311 Haines Rd. Hermantown, MN 55811 218-727-3038 • 800-795-0117 Fax: 218-727-2827 Rogers Division 14375 James Rd. Rogers, MN 55374 763-428-5099 • Fax: 763-428-5051 Industrial Division N1626 Wuensch Rd. LaCrosse, WI 54601 608-788-1025 • 800-780-1025 Fax: 608-788-1027 www.titanmachinery.com

Page 50 • October 11, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

ELZER’S B F F JE Dodge Ram Tough Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications.

TrailMax FWTD-70-PR 8 degree load angle with 33" deck height

Excellent for Pavers!

Design Your Ultimate Work Truck!

Gas-2500, Ready for Plow

2 ram 5500 4x4 108 c/a. please call for spec

2014 Ram 5500 4x4, 84” c/a, Sno-prep, Power Group

NEW PROMASTERS HERE & IN TRANSIT

COMMERCIAL HEADQUARTERS Jeff Belzer Ram Dodge, 21111 Cedar Ave., Lakeville, MN Please Call the Commercial Dept, 1-877-671-8226 OR 952-469-4444 All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change George Miller 952-469-6820 gmiller@jeffbelzer.com

John Zadurski 952-469-6817 jzadurski@jeffbelzer.com

Brent Loucks 952-469-5077 bloucks@jeffbelzer.com

$26 Million... Smart Body SBMT Construction Service Body Modular, Extra Large Toolboxes, Gooseneck Ball, Transfer Tank, Aluminum Deck, Customizable

Hydraulic Detachable Gooseneck

XL Specialized XL-70-HDG 13HP Honda Motor with aluminum pullouts

(800) 222-6047

Smartphone Users Visit Us Online

www.ZipsTransportEquipment.com

Mack Truck Announces Major Plant Investments Mack Trucks announced a $26 million upgrade of the Macungie Cab & Vehicle Assembly facility in Macungie, Pa., that will significantly improve the plant’s efficiency and help it deliver even higher quality trucks to Mack customers, according to the manufacturer. The investment includes a comprehensive realignment of sub-assembly and material handling to more efficiently support the main vehicle assembly lines. The plant also will implement new processes and install new equipment to improve its post-production inspection and testing of completed vehicles. “This investment speaks to our commitment to operational excellence,” said Vice President and General Manager Roger Johnston. “Our highly engaged workforce will use these enhancements to take another

step in our journey toward truly world-class manufacturing in Macungie.” Two new dynamometers — which allow completed trucks to run on stationary rollers for enhanced testing of a variety of engine and vehicle systems — will be installed as part of the upgrade. “Along with a product line-up and a dealer network that have never been stronger, this latest significant investment in our facilities sends a clear message that Mack is poised to grow our business,” said Stephen Roy, president of Mack Trucks North American Sales & Marketing. For more information, visit www.macktrucks.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Visit CEG’s Web Site at www.ConstructionEquipmentGuide.com

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • October 11, 2014 • Page 51

+ PLUS CURRENT

SCHEDULED MAINTENANCE1

+ PLUS

2-YEAR/24K

UPFIT CASH

OFFERS

On select models starting with 2014. eligible vehicles include purchased or leased new 2014 chevrolet cars, trucks, or crossovers in the u.S. covers scheduled oil changes with filter, tire rotations, and 27-point inspections, according to your new vehicle’s recommended maintenance schedule, for a maximum of four service events within 2 years or 24,000 miles, whichever comes first. does not include air filters. extra charge may apply for dual-rear-wheel tire rotations. See participating dealer for other restrictions and complete details. Not valid with all offers. allowance amounts include parts and labor. upfit cash is also available for the transfer of an existing upfit. See dealer for details. take delivery by 9/30/14. Fully backed by gm. gm accessories permanently installed at the time of new-vehicle delivery are covered under the new-Vehicle limited Warranty. if installed after delivery, coverage on parts and labor is for the balance of the new-vehicle warranty or a minimum of 12 months or 12,000 miles, whichever comes first. gm accessories not requiring installation or purchased over the counter carry a 12-month limited warranty on parts only. does not apply to licensed products. take delivery by 9/30/14. 4 Requires available Snow plow prep package (VYu) and Snow plow upfit. Snow plow upfit cash is good for the transfer of an existing snow plow. take delivery by 9/30/14. 5 Adrian Steel van equipment is warranted to be free from defects in material and workmanship, under normal use and service, for a period of 3 years or 36,000 miles, whichever occurs first from the date of delivery to the original retail purchaser when installed by an authorized adrian Steel distribu tor. adrian Steel is a registered trademark of adrian Steel. adrian Steel packages available via transportation fee of $200. See dealer for details. take delivery by 9/30/14. 6 To qualify, vehicle must be used in the day-to-day operation of the business and not solely for transportation purposes. must provide proof of business. For complete program requirements, including information regarding offers, vehicles, equipment, options, warranties, and ordering, consult your chevrolet dealer or visit gmbusinesschoice.net. take delivery by 9/30/14. 7 According to your vehicle’s recommended maintenance schedule for up to 2 years or 30,000 miles, whichever comes first. does not include air filters. covers six oil changes for gasoline engines and four oil changes for diesel. extra charge may apply for dual-rear-wheel tire rotations. See participat ing dealer for restrictions and complete details. ©2013 general motors. all rights reserved. 2 3

Page 52 • October 11, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • October 11, 2014 • Page 53

2014 Ram 3500

2015 Ram 2500

Cab & Chassis, Knapheide 9.6’ Box, Tool Box, Hitch, HD Hemi, Plow Package, Auto, T/C

Std. Cab PW/PL/T/C, Auto, HD Package, 6.4 V8, 8’ Blizzard Plow, Back Up Camera

MSRP $45,750

MSRP $47,576

MSRP $48,965

Fall Special $37,999*

Fall Special $38,599*

Fall Special $39,999*

Fall $pecial$

Ram 3500

Diesels Shipping

Promaster MSRP $34,965

Fall Special $29,999*

Ram 3500 plus Plow

Cab & Chassis Crew

MSRP $51,300

Fall Special $42,999* Choose from 32

Tows 20,800#’s Choose from 7

Only 1 Left!

2013 Ram 3500 Crew 4x4 Dually AIS A/T 850 Cummins P/W, P/L, T/C, A/C, Bedliner

MSRP $53,930

Fall Special $44,113*

#1 Chrysler Corp. Commercial Dealer in Minnesota

The fast lane for small business.

Diesels Shipping

2014 Ram Caravan Cargo

Promaster 1500

P/W, P/L, T/C, A/C

FWD V/6 Auto, P/W, P/L, T/C, A/C

MSRP $23,310

MSRP $31,025

Fall Special $18,499*

Fall Special $28,579*

RAM H.D. HEADQUARTERS

18 Cabs and Chassis in Stock More Coming!

We Deliver! 32 Promasters

Ready to Go! FURY MOTORS South St. Paul, Minnesota Truck Master Dick Reineck • 651.251.8214 direct • rreineck@furymotors.com * Pricing represents all Denver business center rebates deducted!

Page 54 • October 11, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Tandem Axle, Flatbed Utility Trailer...

Aluma’s New 7816 Ideal for Wide Range of Hauling Applications The 7816 features removable aluminum fenders, an extruded aluminum floor, two 5-ft. (1.5 m) aluminum pull out ramps with storage underneath and front and side retaining rails.

Aluma’s 7816 tandem axle, flatbed utility trailer is ideal for a wide range of hauling applications. The 7816 features removable aluminum fenders, an extruded aluminum floor, two 5-ft. (1.5 m) aluminum pull out ramps with storage underneath and front and side retaining rails. The bed is 78 in. wide

by 192 in. (198 by 487 cm) long. The trailer also includes an LED lighting package and safety chains. Durable aluminum trailers from Aluma are lightweight, corrosion resistant and maintenance free. Special features on many makes and models offer users versatility and convenience.

Aluma trailers also come with a 5-year all-inclusive warranty. For more information, call 515/8852398 or visit www.alumaklm.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

OSHAAwards Felling Branch for Safety Workplace safety is of the utmost importance at Felling Trailers. Safety meetings are held once a month and posters are displayed as a constant reminder to keep safety on the forefront of everyone’s mind. Recently, the Litchfield location achieved two years without an Occupational Safety and Health Administration (OSHA) recordable injury with lost time. To celebrate everyone’s achievement, Felling Trailers catered in a meal, paid a bonus, and did a random drawing for a big screen television. Felling Trailers is proud of each team member for putting safety first and achieving this milestone. For more information, call 800/245.2809 or visit www.felling.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

AIS Construction Equipment Corporation 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000 Fax: 517-321-4191

1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 Fax: 701-282-3636 2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551 Fax: 701-663-0692

600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 Fax: 248-437-9750

3660 Interchange Road Columbus, OH 43204 614-443-9751 888-DITCHWITCH Fax: 614-443-9219 www.ditchwitchOH.com 9052 Marshall Road Cranberry Township, PA 16066 724-742-2844 888-DITCHWITCH Fax: 724-742-2877 www.ditchwitchPA.com

www.aisequip.com

Employees received a fun safety reminder during National Safety Month.

Ox Bodies Unveils Stampede Ultralight Ox Bodies Stampede ultralight (UL) series dump body is well-suited for a range of applications from sand-to-small aggregates and asphalt. A lightweight, elliptical dump

Ditch Witch of North Dakota

body is combined with traditional Stampede long-term reliability and durability. The Stampede ultralight is designed for maximizing payload capacity and reducing operating costs in low-wear payload conditions. Average dump body weight reduction is approximately 20 percent over the Ox Bodies’ similarly configured, heavier-duty Stampede HD version, according to the manufacturer. The dump body features widths of 96 and 102 in. (244 and 259 cm), side heights of 36 to 46 in. (91 to 117 cm), lengths of 10 to 21 ft. (3 to 6.4 m) and capacities from 6.9 to 19.0 cu. yds. (52.7 to 14.5 cu m). In addition to a wide range of high-end features, numerous product-enhancing upgrades also are available. For more information, call 800/844-2519 or visit www.oxbodies.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

949 3rd Ave. Windom, MN 56101 507-678-2752

Vermeer Sales & Service 661 Hwy T14 Pella, IA 50219 866-483-7633 Fax: 641-628-4283 Vermeer Siouxland 4858 D. Ave. Marcus, IA 51035 712-376-2310 Fax: 712-376-2312 Vermeer of Eastern Iowa 101 Commerce Blvd. Tipton, IA 50219 563-886-2444 Fax: 563-886-2223 www.vermeeriowa.com

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • October 11, 2014 • Page 55

Scharber & Sons, Inc. 6140 Highway 10 NW Anoka, MN 55303 763-323-1720 888-448-5266 Fax: 763-422-3949

1015 Highway 212 West Norwood Young America, MN 952-467-2182 Fax: 952-467-3259

13725 Main Street Rogers, MN 55374 763-428-4107 Fax: 763-428-2700 www.scharbers.com

3021 West 133rd Shakopee, MN 55379 952-445-6310 Fax: 952-496-0263 23580 Highway 55 Loretto, MN 55357 763-479-8200 Fax: 763-479-8201

901 Parker Ave. W. Dassel, MN 55325 877-570-2740 www.farmriteequip.com

1929 E. Madison Ave. Mankato, MN 56001 507-387-7376 Fax: 507-387-7399

www.westsidetractorsales.com 1400 W. Ogden Ave. Naperville, IL 630-355-7150

600 Walnut Ct Rockdale, IL 815-730-9011

7355 East 30th St. Indianapolis, IN 46219 317-544-3411

150 W. 162 St. Route 6 South Holland, IL 708-331-6362

2170 South Yost Ave. Bloomington, IN 47403 812-333-9677 Fax: 812-333-9731

3021 South 460 East Lafayette, IN 47905 765-477-6933 Fax: 765-448-9038

3120 Congressional Parkway Fort Wayne, IN 46825 260-482-8576 Fax: 260-483-4057

25166 State Road 2 South Bend, IN 46619 574-232-1461 Fax: 574-233-3324

3110 Prairie Rd. Rockford, IL 815-961-3160 1560 North Old Rand Rd. Wauconda, IL 847-526-7700

Page 56 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mid Country Machinery (800) 206-5936

3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302 4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710 106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470

www.midcountrymachinery.com

2012 DEERE 850K WT, EROPS, 809 hrs. ....................$285,000

2011 Kawasaki 65ZV-2, EROPS, Heat, 3694 hrs...........$87,500

2011 CATERPILLAR 928H............................................$126,000

EXCAVATORS

WHEEL LOADERS

2014 KOBELCO SK500 LC-9, EROPS, Heat, A/C, 2 hrs........................................................................$359,000 2014 KOBELCO ED160, EROPS, A/C, Heat, 7 hrs ....................................................................................$CALL 2014 KOBELCO SK85 SR, EROPS, A/C, 2 units ava ............................................................................$131,520 2013 KOBELCO SK210 LC-9, EROPS, 3 Units aval. ............................................................................$163,500 2013 KOBELCO SK260 LR-9, Long Reach, 439 hrs ............................................................................$243,000 2013 KOBELCO SK295 LR-9, Long Reach, 245 hrs ............................................................................$238,500 2013 KOBELCO SK230 SRLC, Aux Hyd., A/C, 531 hrs ........................................................................$162,000 2013 KOBELCO SK140 SR, EROPS, Blade, Plumbed ..........................................................................$143,000 2013 SANY SY215 C, EROPS, Heat, A/C, 102 hrs................................................................................$129,900 2013 SANY SY135 C, EROPS, Aux Hyd, 2 Units aval.............................................................................$96,000 2012 KOBELCO SK350LC-9, EROPS, 2 Units aval. ..............................................................................$245,000 2012 KOMATSU PC220 LC-8, EROPS, Heat, 1062 hrs ............................................................................$CALL 2011 CAT 336EL, EROPS, A/C, Heat, 2427 hrs ........................................................................................$CALL 2007 KOBELCO SK250, EROPS, A/C, Heat, 4517 hrs ..........................................................................$120,000 2007 KOBELCO SK350 LC-8, EROPS, A/C, Heat ..................................................................................$105,000 2006 KOMATSU PC200 LC-8, EROPS, Thumb, 4235 hrs ......................................................................$74,500 2006 HITACHI ZX160, EROPS, Thumb, A/C, 2974 hrs ..........................................................................$68,500 2006 DEERE 230C LC, EROPS, QC, A/C, Autolube ................................................................................$85,000 2006 KOBELCO SK115 SRDZ, EROPS, Blade, Thumb ..........................................................................$63,000 2006 KOBELCO SK160 LC, EROPS, Heat, 6809 hrs ..............................................................................$49,500 2005 KOBELCO SK210LC-6E, EROPS, Aux Hyd. 5880 hrs ....................................................................$78,000 2005 KOBELCO SK250, EROPS, A/C, Heat, 4416 hrs ............................................................................$65,000 2005 KOBELCO SK160 LC, EROPS, A/C, Heat, 2182 hrs ......................................................................$67,500 2004 KOBELCO SK135 SR, EROPS, Heat, 5937 hrs ..............................................................................$39,500 1996 KOBELCO SK150, EROPS, Heat, 4133 hrs ....................................................................................$42,500

2014 KAWASAKI 70Z7, EROPS, Heat, A/C, 14 hrs ..............................................................................$204,000 2013 KAWASAKI 95Z7, EROPS, A/C, Heat, 236 hrs ............................................................................$425,000 2012 KAWASAKI 90Z7, EROPS, Ride Control, 841 hrs ........................................................................$265,000 2013 CAT 924K, EROPS, A/C, Heat, QC ....................................................................................................$CALL 2012 DEERE 624K, EROPS, A/C, Heat, 1083 hrs ................................................................................$149,500 2011 KAWASAKI 65ZV-2, EROPS, A/C, Heat, 3662 hrs ............................................................................$CALL 2011 CAT 928HZ, EROPS, Heat, A/C, 208 hrs......................................................................................$129,000 2010 CAT 924H, EROPS, QC, Ride Control, 1233 hrs ..........................................................................$118,000 2008 DEERE 544J, EROPS, Heat, A/C, 914 hrs....................................................................................$129,500 2006 CAT IT38G, EROPS, Heat, A/C, 7817 hrs ......................................................................................$75,000 2006 DEERE 644J, EROPS, A/C, Heat, 8262 hrs ......................................................................................$CALL 2001 CAT 950G, EROPS, Heat, A/C, Ride Control ....................................................................................$CALL

LOADER / BACKHOES 2011 JCB 3C-14, EROPS, A/C, Heat, 874 hrs ........................................................................................$62,500 2005 CAT 420DIT, EROPS, Heat, X-hoe, 5201 hrs ................................................................................$49,500 1998 DEERE 310SE, EROPS, A/C, Heat, 6814 hrs ................................................................................$28,000 1995 Case 580 Super L, EROPS, Heat, 9292 hrs ..................................................................................$21,500 1989 Case 580 Super K, EROPS, 8735 hrs ..............................................................................................$CALL

MINI EXCAVATORS 2014 KOBELCO SK35 SR-5, OROPS, Push Blade ....................................................................................$CALL 2013 KOBELCO 35 SR-5, EROPS, Heat, 2 Units aval. ............................................................................$41,000 2013 KOBELCO SK35 SR-5, OROPS, Aux Hyd., 220 hrs ......................................................................$32,500 2012 KOBELCO SK55 SR-5, EROPS, Aux Hyd, 235 hrs ........................................................................$59,000 2012 KOBELCO SK55 SR-5, OROPS, Aux Hyd., 287 hrs ......................................................................$59,000 2005 KOBELCO SK70 SR, EROPS, Plumbed, 2575 hrs ........................................................................$39,000

COMPACTORS 2012 BOMAG BW211 D-4, EROPS, A/C, 84” 184 hrs ............................................................................$83,500 2010 VIBROMAX VM46 PD, OROPS, 55”Pad, 162 hrs ..........................................................................$46,500 2010 CAT CD54, EROPS, 67” Smooth Double Drum ..........................................................................$105,000 2008 CAT CP56, OROPS, 84” Pad Foot, 1249 hrs ................................................................................$89,000 2008 CAT CP56, OROPS, 84” Pad Foot, 1255 hrs ................................................................................$87,000 2007 CAT CP563 E, OROPS, Pad Foot, 84”, 1391 hrs ..........................................................................$84,000 2007 DYNAPAC CA150 PD, OROPS, 66”, 228 hrs ................................................................................$55,000 2007 DYNAPAC CA250 PD, OROPS, 84”, 2030 hrs ..............................................................................$57,500 2006 CAT CP563E, OROPS, 84” Pad Foot, 6145 hrs ................................................................................$CALL 2006 CAT CS533 E, OROPS, 84”, 2413 hrs ..........................................................................................$72,000 2006 IR SD70 D, OROPS, Smooth Drum, 1354 hrs ..............................................................................$39,000 2006 IR SD70 D, OROPS, Smooth Drum ..............................................................................................$39,000 2005 BOMAG BW177 PDH-3, OROPS, Pad Foot, 1079 hrs ..................................................................$39,000 2004 HYPAC C832 C, OROPS, 66” Pad Foot, 1386 hrs ........................................................................$33,500 1998 HYPAC C850 C, OROPS, 84” Smooth Drum ....................................................................................$CALL 1988 Case 602B, OROPS, Pad Foot..........................................................................................................$CALL

DOZERS 2013 DEERE 750K XLT, EROPS, A/C, Heat................................................................................................$CALL 2012 CAT D8T, EROPS, 8SU Blade, Heat, A/C, 971 hrs ......................................................................$545,000 2012 DEERE 850K WT, EROPS, Winch, Sweeps, 809 hrs....................................................................$285,000 2011 CAT D6K, EROPS, A/C, Heat, 1647 hrs........................................................................................$170,000 2010 DEERE 550J, EROPS, Draw Bar, 6way, 2602 hrs ..........................................................................$65,000 2009 CAT D6T XW, EROPS, SU Blade, Heat, 4571 hrs ........................................................................$215,000 2008 CAT D6T XW, EROPS, SU Blade, ripper, 3580 hrs ......................................................................$212,500 2008 CAT D6T XL, EROPS, SU Blade, A/C, 4653 hrs ..........................................................................$186,500 2008 CAT D6T LGP, EROPS, Aux Hyd., A/C,4487 hrs ..........................................................................$190,000 2008 CAT D6T XL, EROPS, SU Blade, 4377 hrs ..................................................................................$195,000 2008 KOMATSU D65EX-15EO, EROPS, Winch, 4927 hrs ....................................................................$119,500 2007 CAT D6T LGP, EROPS, A/C, Heat, 1911 hrs ....................................................................................$CALL 2007 DEERE 850J LGP, EROPS, A/C, Heat, 5753 hrs ..............................................................................$CALL 2006 CAT D6R XLIII, EROPS, 6 way, Sweeps, 6568 hrs ......................................................................$142,500 2006 DEERE 550J LGP, OROPS, 6 way, 3294 hrs..................................................................................$43,000 2005 CAT D6R XLII, EROPS, SU Blade, A/C, 7547 hrs ........................................................................$123,500 2005 CAT D6R XWII, EROPS, Aux Hyd., 8361 hrs ..............................................................................$130,000 2005 DEERE 650J, OROPS, 6 way, 1473 hrs ........................................................................................$55,000 2005 DEERE 450J LGP, OROPS, 6way, 3916 hrs ..................................................................................$43,500 2004 CAT D6R XWII, EROPS, Heat, A/C, 12805 hrs ............................................................................$117,500 2001 DEERE 650H, OROPS, PAT Blade, 7182 hrs ....................................................................................$CALL 1987 CAT D6H, OROPS, SU Blade, 14439 hrs ......................................................................................$45,000 1988 Case 602B, OROPS, Pad Foot ..............................................................................$CALL BOOMLIFTS 2012 JLG 600S, 4WD, Sky Power, DSL, 958 hrs ..................................................................................$86,500 2012 JLG 340AJ, 4WD, DSL, 470 hrs ....................................................................................................$52,000 2011 JLG 1500SJ, 4WD, Sky Power, 878 hrs ......................................................................................$240,000 2009 JLG 400S, 4WD, Sky Power, 3308 hrs..........................................................................................$33,000 2008 JLG 800S, 4WD, Sky Power, 1914 hrs..........................................................................................$83,000 2007 JLG 800AJ, 4WD, DSL, 2251 hrs ..................................................................................................$76,600 2005 JLG 1200SJP, 4WD, DSL, 2145 hrs ............................................................................................$109,000 2005 JLG 600S, 4WD, Sky Power, 2319 hrs..........................................................................................$55,000 2005 JLG 450AJ, 4WD, DSL, 1729 hrs ..................................................................................................$37,000 2005 JLG 450A, 4WD, DSL, 2681 hrs....................................................................................................$29,500 2003 JLG 800S, 4WD, 80’ reach, 3558 hrs ..........................................................................................$46,000

FORKLIFTS 2013 SKYTRAK 10054, EROPS, FF Tires, 810Hr..................................................................................$118,000 2013 SKYTRAK 8042, EROPS, FF Tires, 794 hrs ..................................................................................$86,500 2013 SKYTRAK 8042, EROPS, FF Tires, 584 hrs ..................................................................................$85,000 2012 SKYTRAK 8042, EROPS, FF Tires, 623 hrs ..................................................................................$83,500 2012 SKYTRAK 10054, EROPS, FF Tires, 2034 hrs ............................................................................$102,500 2007 SKYTRAK 8042, OROPS, FF Tires, 2588 hrs ................................................................................$55,000 2006 GEHL DL10H-55, OROPS, 1574 hrs..............................................................................................$42,000 2006 LULL 1044C-54, OROPS, Outriggers, 5425 hrs ............................................................................$49,000 2006 SKYTRAK 8042, OROPS, FF Tires, 2373 hrs ................................................................................$55,000 2006 SKYTRAK 6042, OROPS, 2445 hrs ..............................................................................................$41,500 2005 SKYTRAK 6042, OROPS, 4x4, 2773 hrs ......................................................................................$42,000 1996 LULL 644B-37, OROPS, Tilt Carriage, 6331 hrs............................................................................$19,500

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ October 11, 2014 â&#x20AC;˘ Page 57

0% for 48 Months* Expires 10/31/14

YOU WONâ&#x20AC;&#x2122;T BELIEVE ALL THE BRIGHT IDEAS WE PICKED UP ON THE WAY HERE. Introducing the new E-Series Skid Steers and Compact Track Loaders. When we asked RSHUDWRUV OLNH \RX WR GHVLJQ WKHP WKHUH ZDV QR VKRUWDJH RI EULJKW LGHDV /LNH D Ć DW Ć RRU with 25-percent more foot room. Up to 10-percent more horsepower. Switchable controls for large-frame models that let operators choose between ISO, H-pattern, and foot controls. And easier attachment hookup. You challenged us to make them great, and we didnâ&#x20AC;&#x2122;t disappoint. To see more bright ideas, visit your dealer or our website.

YOUâ&#x20AC;&#x2122;RE ON.

www.JohnDeere.com/Eskid

RDO Equipment Co.

*Offer valid through October 31, 2014. Subject to approved installment credit through John Deere Financial. Offer includes new John Deere Skid Steers, Compact Track Loaders and Compact Excavators. 0% APR for 42 months is available on new John Deere Compact Wheel Loaders. Some restrictions apply. Other offers available. See dealer for details.

Ryan Miller Burnsville, MN 952-890-8602

Scharber &â&#x20AC;&#x2C6;Sons Rogers, MN 763-428-4107

Chris Conrad Rochester 507-282-8888

Isanti County Equipment Isanti, MN Jesse Kraft 763-444-8873

www.rdoequipment.com

www.mnequipmentsolutions.com

Page 58 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Training Sessions Help Team Identify Member Strengths RUDD from page 16

Jon Williams and Training Department Administrative Assistant, Vicki Duncan. The Technical Call Center is a resource for technicians when they encounter situations in the field where additional information or assistance with diagnostics is required. The Training center houses a fully equipped service bay and both the class room and service bay are outfitted with large Hitachi Star Board Interactive touch screens to display schematics and training videos. In addition to the standard tools of the trade, every technician also is equipped with a laptop computer. With the Technical Training Center, Call Center and Warranty Center under one roof, efforts are more efficiently coordinated between the departments. Training courses generally consist of three day-long instructions running from Tuesday through Thursday with a half-day session on Friday, allowing technicians travel time to get home. Class sizes average 12 technicians who travel to the Louisville facility from the

company’s 13 locations, which are located in Kentucky, Indiana, Missouri, Ohio, Pennsylvania and West Virginia. The company runs approximately 32 training sessions each year with about 90 percent conducted at the Training Center, however, trainers also travel to branch locations as needed. Typically, the training sessions consist of 75 percent classroom training and 25 percent time with the machine. Technicians also take safety training refresher courses annually. Goins is in charge of scheduling all of the technicians for their training courses to avoid situations where branch managers may be reluctant to give up their best technicians for a week. Technicians are tested after successful completion of each course to receive accreditation. Rudd Equipment Company ranks technicians on a stepped level starting with apprentice and moving through levels 1, 2 and 3 to master technician as the highest level. The company currently has eight master technicians on staff. Trainer Brad Kinser said their goal is to give all of their technicians an oppor-

Technical Call Center Specialist Jon Williams works behind the scenes to assist technicians in the field.

tunity to achieve master technician status.With equipment design becoming increasingly complex; higher demands on fuel efficiency, environmental impact, machine automation and performance capabilities being only a few of the factors, the need to stay current is essential. Rudd Equipment Company is determined to invest in the people and resources necessary to stay ahead of the curve and lead the marketplace in customer service, said Maggard. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Rudd provides technicians with the latest training tools, such as this Volvo Fire Suppression System simulator, one of the only of its kind in the United States.

Putters Participated on Four Different Greens, Top Teams Advanced to Finals GOMACO from page 18

the top team from each green advancing to the Putting Championship. This year’s championship team was Kevin Gesink of Water Valley Investment Advisors Inc., in Sioux Center, Iowa, and Al Meyerdirk of SunSource in Spirit Lake, Iowa. The Contractors’ Shoot-Out started immediately after the Putting Tournament. Eighteen contractors were divided into six, three-person teams in a five-hole competition, with the highest scoring team eliminated on each hole. This year’s championship team included: Ryan Grathwohl of ESS in Columbia, Mo.; Tom Giefer of Kansas Heavy Construction LLC, in Shawnee, Kan.; and Derek Dilger of Smith Paving and Excavating Inc., in Norwalk, Ohio. Invitational activities began on Wednesday morning with the golfers heading out to the courses in Ida Grove, Holstein, Mapleton and Odebolt for the

18-hole Scramble Tournament. A total of 248 golfers participated in this year’s Scramble Tournament. Champion teams were crowned from each course and advanced to the three-hole “Grand” Champion ShootOut in Ida Grove. The 2014 “Grand” Champion team was from the Mapleton course and included Jim Hayward of GOMACO; Richard Michael of Turner-Michael Construction Co. in Grain Valley, Mo.; Andru Small of Terry Equipment in Bloomington, Calif.; and Larry Berg of Wicks Construction in Decorah, Iowa. They finished their tournament with a score of 56, which was 14 under par. The Ida Grove tournament champion was the team of Tim Rife of Luxa Construction in Blair, Neb.; Grant Godbersen of GOMACO; Murray Lodge of TOPCON Positioning Systems, Inc., in Livermore, Calif.; and Ken Singer of Heavy Equipment Guide magazine in Vancouver, British

Columbia, Canada. They finished their tournament with a score of 61, which was nine under par. Winning the Holstein tournament was the team of Andy Kvidera of Manatt’s Inc., in Brooklyn, Iowa; Skyler Luxa of Luxa Construction Co. in Blair, Neb.; Tom Farr of GOMACO; and Chad Hasert of PACE Manufacturing Inc., in Brandon, S.D. They finished their tournament with a score of 58, which was 12 under par. The champion team from Odebolt included Tom Giefer of Kansas Heavy Construction LLC, in Shawnee, Kan.; David Barthel of Faris Machinery in Commerce City, Colo.; Mike Norrad of Norquip Supply Ltd. in Fredericton, New Brunswick, Canada; and Travis Brockman of GOMACO. They finished their tournament with a score of 63, which was nine under par. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

There is no spokesperson with a catchy phrase to remind the driver to slow down, stop eating, quit messing with the radio or pay attention to the road. LIk_\Jgfb\jg\ijfe%Zfd

There’s Only You. Speak Up.

SECTION

Attachment & Parts Pages 59-63

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Genesis Grows Demo Recycler Concrete Processor Product Family With GDR 400

The Geith (pro-link) hydraulic thumb provides up to 180 degrees of rotation.

Genesis Attachments expanded its demolition recycler concrete processor product family with the new GDR 400. Fitting 40 to 55 ton (36 to 50 t) excavators, the GDR 400 features a 48-in. (122 cm) jaw opening and 41-in. (104 cm) jaw depth, making it the line’s most powerful all-purpose processing and cutting attachment for high-reach and standard demolition as well as road and bridge applications. “The availability of the GDR 400 concrete processing attachment positions Genesis to better serve the project spectrum of demolition contractors worldwide, from small with our GDR 150 to now the largest projects with the 400,” said Chad Wood, Genesis new product development engineer. The GDR 400 is available with concrete cracker or concrete pulverizer jaws, each of which minimizes dust, noise and flying debris while maximizing productivity, according to the manufacturer. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

The GDR 400 is available with concrete cracker or concrete pulverizer jaws.

Pro-Link Thumb Doosan Wedge Lock Coupler Attachment Expands Mounting System Lineup Offers Greater Grabbing Ability The Geith progressive linkage (pro-link) hydraulic thumb provides up to 180 degrees of rotation, allowing operators to pick up and place rocks, tree stumps and pipes — among other odd-shaped objects — closer to the excavator. The prolink thumb’s universal pivot linkage system enables it to be installed on any excavator arm — without requiring the removal of the dipper arm linkage. Manufactured with high-strength steel, the thumb’s strong, rigid structure and oversized high-profile pivot pin increase torsion resistance. In addition, integrated linkage positional stops protect the hydraulic cylinder from damage, while a lock-up pin enables operators to safely secure the thumb in a storage position when not in use. The inductionhardened-chrome hydraulic cylinder rod further extends the pro-link thumb’s working life. For more information, visit www.geith.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Doosan has released the force. The new coupler has a wedge lock coupler for use limited increase in tip radius with the company’s 6.6 to 58 over pin-on mounting. ton (6 to 53 t) crawler excaThe wedge lock coupler is vators. This new attachment designed to allow for the use expands the Doosan coupler of multiple attachments, such line, which currently includes as Doosan’s line of heavythe hydraulic quick coupler. duty digging buckets. It also The new wedge lock coumounts the company’s curpler manual mounting system rent offering of trenching is approved for use with 13 buckets and is capable of crawler-excavator models efficiently releasing highincluding the DX63-3, capacity bucket models. The DX85R-3, DX140LC-3, The new wedge lock coupler manual mounting sys- new coupler also will pair DX140LCR-3, DX180LC-3, tem is approved for use with 13 crawler-excavator with Doosan’s excavator DX225LC-3, DX235LCR, models. clamp attachments. DX255LC-3, DX300LC-3, In an effort to increase job DX350LC-3, DX420LC-3, DX490LC-3 and DX530LC- site safety, the wedge lock coupler’s swing ear design and 3. the use of a bolt retainer safety plate helps prevent attachThe wedge lock coupler allows operators to change ments from falling. their excavator attachments without the need for addition(This story also can be found on Construction Equipment al hydraulics, but does not decrease a machine’s breakout Guide’s Web site at www.constructionequipmentguide.com.)

Page 60 • October 11, 2014 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Paladin’s Bradco Hardscape Grapple — All Gain No Pain The Bradco hardscape grapple by Paladin Attachments is the newest addition to Paladin’s grapple selection. Designed to eliminate the back-breaking job of moving heavy hardscape materials from place to place, they are mounted on skid steer loaders, compact tool carriers and compact tractors for quick and easy handling of materials such as concrete paver sections, small boulders and granite/limestone/concrete steps. They are ideal for hardscape supply dealers, land-

scapers and property owners doing their own landscaping. As a hydraulically-powered alternative to forks, pry bars and brute strength, the attachment’s grapple arms and rubber grips adjust automatically to the shape and contour of the material being grasped without additional positioning. For increased safety, a cylinder check valve prevents loss of clamping force even if the machine’s hydraulic power is lost. Users also can easily reach over other sections of materials

As a hydraulically-powered alternative to forks, pry bars and brute strength, the attachment’s grapple arms and rubber grips adjust automatically to the shape and contour of the material being grasped without additional positioning.

Got MATERIALS to Move? No matter what your material, Pemberton has the bucket, grapple or forks to handle it and we can fit it to your specific wheel loader or excavator. We have the attachment you need for construction, demolition, logging and scrap material or waste handling.

Contact Pemberton today to see how we can help you maximize your equipment and your manpower.

for specific selection, or load and unload heavy hardscape materials from the bed of a trailer or truck. For easy storage, the hardscape grapple has a simple stand utilizing two steel tubes that have been integrated into the attachment and can be stored neatly in the quick attach when not in use. Weighing 175 lbs. (79 kg), this grapple attachment can lift up to 1,500 lbs. (680 kg) with a clamp force of 1,525 lbs. Designed with a grip range of 18 to 48 in. (46 to 122 cm), a plunge depth minimum of 13 in. (33 cm) and a maximum reach of 14 in. (35.5 cm) the hardscape grapple is purpose-built with the landscaper and hardscape supply dealer in mind. For more information, call 800/456-7100 or visit www.paladinattachments.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Multi-ply Your Money! with the excavator rock ripping Multi-Ripper Bucket ®

Multi-Ripper Bucket Hi-Cap Multi-Ripper Bucket

Multi-Ripper

Multi-Ripper Bucket

n on As seye channel’s er Disco#v1 hit shosw Ru h” d l o G “ 6 to 9 times the force of a standard 5 tooth bucket 4 times faster than a hammer

Maximize force one tooth at a time, using our patented "Shanks on an Arc" technology.

eading "Leader in Excavator Rock Ripping Attachments" dge visit: www.digrock.com ttachments, e-mail: sales@leattach.com Inc. ®

Whatever Your Application: RECYCLING • LOGGING • CONSTRUCTION • AQUATIC • WASTE HANDLING • DEMO • SCRAP • ROAD & BRIDGE We Have Your Attachment: GRAPPLES • BUCKETS • CRUSHERS • RAKES • SHEARS • FORKS • CUSTOM ENGINEERING

CLICK OR CALL TODAY! PEMBERTONATTACHMENTS.COM • 1-800-393-6688

call to order: 866-928-5800 or 508-829-4855

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • October 11, 2014 • Page 61

Tougher Tougher Than T han Everything. Ev er y t hing . Montabert br Montabert breakers eakers ssense ense the the hardness hardness o aterial, adapting adapting off m material, ttheir heir power power a nd sstrike trike and ffrequency requency to to del iver deliver jjust ust tthe he rright ight a mount amount o nergy. Y ou ge he off e energy. You gett tthe be st po ssible pe rformance best possible performance e very time, time, without without all all every tthe he wear wear a nd tear. tear. and M ore breakups… breakups… More F ewer breakdowns. breakdowns. Fewer T hat’s M ontabert. That’s Montabert.

See our See ou u urr attachments attachments iin n action! action! www.montabert-us.com w ww.montabert-us.com

in Follow us us on on social social media media Follow updates ffrom rom ffor or rregular egular updates Montabert! Montabert! 2905 Shawnee Shawnee IIndustrial ndustrial W ay 2905 Way S uwanee, GA 3 0024 Suwanee, 30024 u ssales@montabert .com ussales@montabert.com 11-866-472-4373 - 866 -472-4373 fa x: 866-472-4950 866 -472-4950 fax: M Montabert o nt a b e r t a and nd tthe he M Montabert onta be r t llogo ogo a are re rregistered egiste re d ttrademarks ra d e m a rk s o off M Montabert onta b e r t S.A.S. S . A . S . in in the the United U n i te d S States t a te s a and nd v various a rio us c countries o u ntr i e s a around ro un d tthe he w world. o rld .

Page 62 • October 11, 2014 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

PROVIDING SUPERIOR PRODUCTS & SUPPORT SINCE 1996

1985! e c n i S

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

www.RBusedParts.com CALL JENNIFER TODAY! ASK ABOUT OUR BREAKER AUTOLUBE SYSTEMS!

(888) 288-1052 jennifer@RBusedParts.com

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • October 11, 2014 • Page 63

overbuilt

to be overworked. Find your bucket at www.geith.com 2905 Shawnee Industrial Way, Suwanee, GA 30024 T. 800-762-4090 F. 866-472-4950 E. ussales@geith.com Geith and the Geith logo are trademarks of Geith International Limited.

Page 64 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

With over 100 years of experience and a commitment to speed, Terex Cranes focuses on getting the job done, aiming at maximum uptime and a high return on investment. Because your results are what really matters. Contact our distributors and find out how we can help to improve your bottom line.

RTL Equipment Inc. (RT-T-HC/CC-AT) www.rtlequipment.com 3000 SE Gateway Drive Grimes, IA 50111 515-986-0262 Fax: 515-986-0267

Custom Truck & Equipment (RT-T-HC/CC-AT-BT) 7701 Highway 24 Kansas City, MO 64125 800-861-1065 www.cte-equipment.com

2601 120th St. NW Swisher, IA 52338 319-857-4045 Fax: 928-441-1269

All Erection & Crane Rental Corp. (RT-T-HC/CC-AT-BT-Towers) www.allcrane.com 4700 Acorn Dr. Independence, OH 44131 800-232-4100 Fax: 216-642-7633

BRANCH LOCATIONS All Crane Rental of PA, LLC Pennsylvania 412-382-4200

Dawes Rigging & Crane Rental, Inc. Wisconsin 414-453-5335

All Crane & Equipment Rental Corp. West Virginia 304-766-0300

Jeffers Crane Service, Inc. Michigan 419-693-0421

For Your Local Terex Dealer, Please Contact: Terex USA, LLC 106 12th St. SE Waverly, IA 50677 USA Phone: (319) 352-3920 Fax: (319) 352-9395 email: info.cranes@terex.com web: www.terex.com/cranes

Terex is a registered trademark of Terex Corporation in the United States of America and many other Countries.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 65

s 0OWERFUL 59 HP Kubota diesel engine (Interim Tier IV compliant) s 6ERSATILE Fully integrated front loader and backhoe with Quick Attach Coupler capability for maximum efficiency s 2ESPONSIVE HST Plus Transmission with Feather Step operation

Burris Equipment Co. 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 Fax 847/336-2697 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 Fax 815/363-4109

2001 Cherry Hill Rd. Joliet, IL 60433 815/464-6650 Fax 815/464-6951

1st Choice Equipment LLC 124 N. Schmale Rd. Carol Stream, IL 60188 630/510-6050 Fax 630/510-6051 1305 Sentry Drive Waukesha, WI 53186 262/521-5802 Fax 262/521-5801

Birkey’s Construction Equipment 2202 S. High Cross Road Urbana, IL 61802 800/798-1772 Fax: 217/337-1775

2900 E. Jackson St. Macomb, IL 61455 888/360-9225 200 North St. Prophetstown, IL 61277 877/221-0881

Lano Equipment, Inc. Anoka, MN 888/448-5266 753/323-1720 Shakopee, MN 877/753-6100 952/445-6310

Corcoran, MN 888/479-4342 763/479-8200

Construction Equipment from the Ground Up. www.kubota.com ©Kubota Tractor Corporation, 2008

ABC Equipment 29 Pearl Rd. Brunswick, OH 44212 888/572-3888 Fax: 330/220-4949 3825 Chester Rd. Avon, OH 44011 440/934-7368 www.abcequipment.com

Southeastern Equipment Co., Inc. 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260/483-8868 4951 West 96th Street Indianapolis, IN 46268 317/872-4877 www.southeasternequip.com

Page 66 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Komatsu America Launches New C93 Harvesting Head Authorized Authorized Doosan Doosan Dealers Dealer s

With a recommended DBH working range of 6 to 15 in. (15 to 37 cm) diameter and a maximum cutting capacity up to 23.6 in. (60 cm) diameter, the C93 is available installed on Komatsu 911.5 and 931.1 harvesters.

IL ILLINOIS LINOIS

N NEBRASKA EBRASKA

LLuby uby Eq Equipment uipment

Bo Bobcat bcat of of O Omaha maha

Q Quincy uincy

Oma Omaha ha

2217-222-5454 17-222-5454 w www.lubyequipment.com w w.lubyequipment.com

402-895-6660 402-895-6660 www.bobcat-omaha.com w w w.bobcat-omaha.com

IN INDIANA DIANA R Ronson onson Eq Equipment uipment Co. C LLC LLC LLowell owell 2219-696-5680 19-696-5680 • 866-350-5538 866-350-5538 www.ronsonequipment.com w w w.ronsonequipment.com

IOWA IOWA Br Brown’s own’s Heavy Heavy Equipment, Equipment, Inc. Inc.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

7701-662-5331 01-662-5331

ddba ba B obcat of of G rand FForks or k s Bobcat Grand G rand FForks or k s Grand

Ames Ames

7701-772-5006 01-772-5006

ddba ba B Bobcat obcat ooff W Williston illiston Williston Williston

R RTL TL Eq Equipment, uipment, In Inc. c. G Grimes rimes S Swisher w i s h er

an integrated valve that delivers precise control of saw hydraulic flow and pressure. This constant management of flow and pressure allows the chain speed to be maintained at a constant 130 ft./sec. (40 m/sec) throughout the entire cutting cycle. This Constant Cut system, along with automatic chain tensioning and automatic EcoOiler chain oiling, delivers faster cutting performance, reduced energy (fuel) consumption, reduced chance of splitting and/or cracking, reduced saw maintenance, and longer saw motor life. Optional multi-stem accumulation, stump treatment and color marking systems are available to meet specific customers’ needs. Komatsu’s new MaxiXplorer 3.1 head control system is standard and provides a flexible and user-friendly control and monitoring system. When installed on a Komatsu harvester, it is a complete system for machine control, head control, crosscutting and administration. Machine productivity is optimized by controlling everything from the head through the crane, cab leveling, transmission, and ladders. For optimal maintenance and serviceability, all grease servicing points, bar oil and color marking tank fill points are accessible from one position when the head is parked on the ground. All electrical circuits are identified by numerical tags, and all solenoids have LED indicator lights identifying when power is at the solenoid. For more information, visit www.komatsuforest.us.

ddba ba B obcat of of Devils Devils Lake L ake Bobcat De vils LLake ake Devils

5515-232-8456 15-232-8456 • 800-723-5460 800-723-5460 w www.brownsheavyequipment.com w w.brownsheav yequipment.com

5515-986-0262 15-986-0262

Komatsu America Corp.’s C93 harvesting head is a versatile “all-around” head weighing in at 2,138 lbs. (970 kg). This is the first model in Komatsu’s new C-series family of “carry-style” heads. The C93 replaces the prior 350.1 model, and offers significant improvements for better handling of thinning projects as well as crooked stem and multi-stem harvesting applications, according to the manufacturer. With a recommended DBH working range of 6 to 15 in. (15 to 37 cm) diameter and a maximum cutting capacity up to 23.6 in. (60 cm) diameter, the C93 is available installed on Komatsu 911.5 and 931.1 harvesters. The head also is available as a loose head for installment on other carriers. The C93’s new robust frame design enables the head to more closely follow the tree trunk. The increased rearward tilt angle (40˚ vs. 25˚) provides faster feeding performance while reducing head frame stress when harvesting and/or reaching on downhill slopes. The high-performance threedriven roller, four motor carry-style feed system provides excellent log wrap for multistem processing, while generating up to 5,688 ft. lb. (25.3 kN) of feed force at up to a 16.4 ft./sec. (5 m/sec) feed speed, according to the manufacturer. The C93 is equipped with one lower and two upper hydraulically controlled delimbing knives, and a fixed vertical top knife. The upper knives are designed especially for handling trees with tough limbs, such as lodgepole pine. Komatsu’s new Constant Cut saw control system features a 29.5 in. (75 cm) saw bar, which includes a new 19cc saw motor with

NORTH NORTH D DAKOTA AKOTA Ir Ironhide onhide Equipment Equipment

7701-572-5050 01-572-5050 w www.goironhide.com w w.goironhide.com

OHIO OHIO

3319-857-4045 19-857-4045 w www.rtlequipment.com w w.r tlequipment.com

Bo Bobcat bcat En Enterprises, terprises, In Inc. c.

K KENTUCKY ENTUCKY

513-874-8945 513-874-8945 • 800-589-2281 800-589-2281

Bo Bobcat bcat ooff Bo Bowling wling G Green reen Bowling Bowling Green Gr een 27 270-842-4253 0-842-4253 www.bgbobcat.com w w w.bgbobcat.com

MIC MICHIGAN HIGAN Ca Carleton rleton Eq Equipment uipment Co. Co., C , In Inc. c. Byron Byron Center Center

C Cincinatti incinat ti H Hilliard illiard 614-876-1116 614-876-1116 w www.bobcat-ent.com w w.bobcat-ent.com

Gib Gibson son M Machinery achinery LLLC LC C Cleveland leveland 440-439-4000 440-439-4000 w www.gibsonmachinery.com w w.gibsonmachiner y.com

6616-877-3388 16-877-3388

S SOUTH OUTH D DAKOTA AKOTA

C Chesterfield hester field

D Diesel iesel M Machinery, achinery, In Inc. c.

5586-463-3333 86-463-3333

Aberdeen Aberdeen

Kalamazoo Kalamazoo

605-725-4364 605-725-436 4 • 888-762-6312 888-762-6312

2269-343-2943 69-343-2943 • 888888-380-6420 3 8 0 - 6 42 0

Livonia Livonia 7734-421-9999 34-421-9999

Saginaw Saginaw 989-777-6666 989-777-6666 w www.carletonequipment.com w w.carletonequipment.com

M MINNESOTA INNESOTA

R Rapid apid C City it y 6605-348-7438 05-348-7438 • 800-658-3047 800-658-3047

Sioux S ioux Falls Falls 60 605-336-0411 5-336-0411 • 8800-456-4005 00-456-4005 www.dieselmachinery.com w w w.dieselmachiner y.com

WISCONSIN W ISCONSIN

LLano ano Eq Equipment, uipment, In Inc. c.

S Swiderski widerski Eq Equipment, uipment, In Inc. c.

Shakopee Shakopee 9952-445-6310 52-445-6310 • 877-753-6100 877-753-6100 www.lanoequip.com w w w.lanoequip.com

715-623-4668 715-623-4668

M MISSOURI ISSOURI

715-693-3015 715-693-3015

B Bobcat obcat ooff S St. t. LLouis ouis Columbia Columbia

A Antigo ntigo Mosinee Mosinee Thorp Thorp 715-669-5255 715-669-5255

5573-886-9435 73-886-9435

Waupaca Waupaca

V Valley alley P Park ark

715-258-3266 715-258-3266

6636-225-2900 36-225-2900 • 800-782-0854 800-782-0854 www.bobcatofstl.com w w w.bobcatofstl.com

LLuby uby Eq Equipment uipment Cape Cape Girardeau Girardeau 5573-334-9937 73-334-9937 w www.lubyequipment.com w w.lubyequipment.com

Wausau Wausau 715-675-2391 715-675-2391 w www.swiderskiequipment.com w w.swiderskiequipment.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 67

– Todd Hyman, Grand Venture Dairy, LLC Adams, New York

“ 7 days a week, 365 days a year, and the loader has not let us down.” Doosan Delivers www.doosanequipment.com/Todd11

Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2014 Doosan Infracore Construction Equipment America. All rights reserved. | 0914204

Page 68 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

STAR EQUIPMENT LT D .

TOP NOTCH EQUIPMENT, INC.

STAR EQUIPMENT LTD. 1401 2Nd AvENUE dES moINES, IA 50314 (515) 283-2215 FAx: (515) 283-0295 (800) 369-2215

2625 w. AIRlINE Hwy. wATERloo, IA 50703 (319) 236-6830 FAx: (319) 236-6834 (800) 791-9249

2950 6TH STREET Sw cEdAR RAPIdS, IA 52404 (319) 365-5139 FAx: (319) 365-6726 (800) 728-5139

www.STAREQUIP.com

2100 E. lINcolN wAy AmES, IA 50010 (515) 233-9500 FAx: (515) 233-9505 (866) 856-2312

5505 HIgHwAy 169 N. PlymoUTH, mN 55442 (888) 824-6559 (763) 398-0079 FAx: (763) 551-7916 www.ToPNoTcHEQUIPmENT.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 69

7355 East 30th St. Indianapolis, IN 46219 (317) 544-3411 Fax: (317) 544-3420 www.westsidetractorsales.com Bloomington, IN (812) 333-9677 Fax: (812) 333-9731

South Bend, IN (574) 232-1461 Fax: (574) 233-3324

4301 North Cliff Ave. Sioux Falls, SD 57104 (888) 753-8907 3801 North Deadwood Ave. Rapid City, SD 57702 (800) 658-3047 39288 133rd St. Aberdeen, SD 57401 (888) 484-6312 www.dieselmachinery.com

Fort Wayne, IN (260) 482-8576 Fax: (260) 483-4057 LaFayette, IN (765) 447-6933 Fax: (765) 448-9038

4100 Gardner Ave. Kansas City, MO 64120 (816) 241-9290 (816) 241-1738 www.vlpco.com Joplin (800) 878-8223 (417) 781-8222 Springfield (800) 955-2729 (417) 887-2729 Wichita (800) 878-3346 (316) 838-3346 Topeka (800) 878-4345 (785) 267-4345 Garden City (800) 511-1435 (620) 275-1996

2300 Cassens Drive Fenton, MO 63026 (636) 343-9970 www.lubyequipment.com

50 East Kingston Ave. Columbus, OH 43207 614-443-6541 www.columbusequipment.com

Cape Girardeau (573) 334-9937

Perrysburg (419) 872-7101

Springfield (217) 744-2233

Cincinnati (513) 771-3922

Quincy (217) 222-5454

Richfield (330) 659-6681

Caseyville (618) 397-9971

Cadiz (740) 942-8871 Dayton (937) 879-3154 Canton (330) 453-4521 Zanesville (740) 455-4036 Painesville (440) 352-0452 Piketon (740) 289-3757

Page 70 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Tiltable cab

Superior boom design

Removable outrigger boxes

RT9150E rough-terrain crane At Grove, we provide high-performance features, reliable / support and a quality product lineup – because cranes are all we do. With  rough-terrain models ranging from - USt, we’ve got a crane to handle any jobsite. Featured is the RTE – its  USt capacity and  ft. boom combination provide the best capacity and longest boom in its class.

LEADERS IN LIFTING For more information, visit www.manitowoccranes.com

Kirby Smith Machinery Inc. 12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700

6715 W. Reno Ave. Oklahoma City, OK 73127 405/495-7820 Kansas City, KS 913/850-6300 877/851-5729

Cleveland Crane & Shovel Sales, Inc. 26781 Cannon Road Cleveland, OH 44146 440/439-4749 800/362-8494 Fax: 440/439-2177 aforepaugh@ craneandshovel.net www.craneandshovel.net

Walter Payton Power Equipment LLC 930 W 138th Street Riverdale, IL 60827 708/656-7700 Fax: 708/532-1273 25210 Brest Road Taylor, MI 48180 734/947-9250 Fax: 734/947-9260

920 S State Road 39 Lebanon, IN 46052 765/482-4145 Fax: 765/482-4928 3400 Claremont Avenue Evansville, IN 47712 812/422-6912 Fax: 812/422-6982

Aspen Equipment Company www.aspenequipment.com 1525 S.E. Cortina Dr. Ankeny, IA 50021 515/965-1000 Fax: 515-965-1790 11475 S. 153rd St. Omaha, NE 68138 402/894-9300 Fax: 402-894-9302

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 71

Meeting emissions regulations demands forward thinking. And John Deere has always been ahead of the game. So when you asked for simple, proven Interim Tier 4-certified technology that won’t hold you back, we answered. First with the 744K,* and now with the IT4-certified 644K and 724K Loaders. Our emissions technology is simple to operate and maintain. And it delivers the power, fuel efficiency, reliability, and low cost of ownership you’ve come to expect from John Deere. Need a partner for emissions solutions? We’re On It™. * First machine over 75 hp in the industry to be certified to meet U.S. Interim Tier 4 emissions.

THINK. AHEAD.

Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989/777-0090 Fax: 989/777-1583 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616/538-2400 Fax: 616/538-0449 Northeast Detroit 65809 Gratiot Ave Lenox, MI 48050 586/727-7502 Fax: 586/727-7311

West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248/437-8121 1-800/457-8121

Traverse City 8300 M-72 East Williamsburg, MI 49690 231/267-5060 Fax: 231/267-5257

www.westsidetractorsales.com

Naperville, IL 60563 Bloomington, IN 47403 Des Moines, IA 630/355-7150 Fax: 630/355-7173

800/822-2212

812/333-9677 Fax: 812/333-9731

Fort Dodge, IA

www.murphytractor.com

, Topeka, KS 800/279-6087

Ulysses, KS

Ashland, WI 715/682-5522

Grand Rapids, MN 218/326-9427

Omaha, NE

Lima, OH 800/423-7445

Chippewa Falls, WI 715/834-2924

Escanaba, MI 906/789-9054

Painesville, OH 866/800-1398

Monico, WI 715/487-5583

Louisville, KY 502/253-3721

Poland (Youngstown), OH 866/503-7259

Mosinee, WI 715/693-3820

Richmond, KY 859/623-2030

Duluth, MN 218/722-7456

Bowling Green, KY 270/842-3400

Bemidji, MN 218/759-1996

London, KY 606/862-8447

800/472-9238 800/416-5095 Wayne, Fort260/482-8576 IN 46808 800/362-2487 Sioux City, IA Kansas City, MO Brunswick, OH 800/352-4693 888/306-3434 800/716-9796 Fax: 260/483-4057 Waterloo, IA Springfield, MO Cambridge, OH 888/306-2656 740/439-2747 Rockford, IL 61102 Indianapolis, IN 46219 800/772-2019 317/544-3411

South Holland, IL 60473 708/331-6362 Fax: 708/331-7334 Wauconda, IL 60084 847/526-7700 Fax: 847/526-3565

Fax: 317/544-3420 IN 47905 Lafayette, 765/447-6933 Fax: 765/448-9038 South Bend, IN 46619 574/232-1461 Fax: 574/233-3324

Dodge City, KS 800/794-0172

Great Bend, KS 800/264-4056 Park City, KS 800/262-0139

Gering, NE 800/205-6784

Canton, OH 866/235-0438

Grand Island, NE 800/868-4017

Chillicothe, OH 740/663-5300

Lincoln, NE 800/416-5518

www.nortrax.com

Columbus, EOH 800/222-2010

Rockdale, IL 60436 815/730-9011 1-800/937-3355 Fax: 815/730-9036 815/961-3160 Fax: 815/965-1810

D 2 North Platte, NE B 2 800/894-7060

Cincinnati, OH 800/844-3734

Vandalia (Dayton), OH 800/233-4228 Cranberry Twp, PA 724/776-3636 Greensburg, PA 724/837-4500

www.brookstractor.com Sun Prairie 1900 W. Main St. P.O. Box 9 Sun Prairie, WI 53590 608-837-5141 Milwaukee 12101 W. Silver Spring Dr. Milwaukee, WI 53225 414-462-9790 De Pere 1031 Lawrence Dr. De Pere, WI 54115 920-336-5711 West Salem 451 W. Avenue N. West Salem, WI 54669 608-786-2644 Plover 5429 Prairie Dr. Plover, WI 54467 715-254-2777

Page 72 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

President of C.E. Duff & Sons, OAIMA Member James E. Duff Passes Away James Duff, president of C. E. Duff & Sons (now Duff Quarry Inc.) passed away on Sept. 16 in Bellefonte, Ohio. He was 81. “After a long and difficult battle with a rare form of cancer, my grandfather is at peace in heaven,” said Jason Duff. The Duff family businesses started with very humble means. They operated two dump trucks and began hauling stone to area farms, homes and businesses from a leased sand and gravel pit in Westminster, Ohio, in the late 40s and 50s. Mr. Duff and his father also hauled stone from Western Ohio Stone located near Huntsville until the quarry closed because it had exhausted all of its mineral deposits. Seeing this as an opportunity, Duff and his father were able to get a loan written on a napkin by an investor in Jackson Center allowing them to purchase the adjoining farm across from West Ohio Stone and they immediately began digging. Hitting solid rock, Duff and his father began operating C. E. Duff and Son Inc. in 1956 which is now known as Duff Quarry today. Mr. Duff has two sons, Scott and Dave Duff. Each son has had a clear effort in expanding the family business and improving its products and services. Scott Duff operates and now serves as president to Ohio Ready Mix Inc., a regional supplier of ready mix concrete and his son Dave Duff is owner of Mr. Concrete Inc., supplying brick and concrete block. Together with grandsons Jason and Ross and grandson-in-law Jeremy operate these businesses and Ohio Lumber & Building Supply today. The Duff companies began with few employees and over the years as the company has grown because of Duff's visionary leadership, now employing more than 50 people today. The late Duff credited his success as a reflection of the success of the company as a whole, every team member down to the person operating the loader. His attention to detail and caring for his employees is one of his many attributes that his sons and grandsons are committed to continuing today. By providing fair wages, generous benefits, many Duff employees have been with the company for more than 40 years. Several employees also are multi-generational, meaning that both father and son have worked at the operation. Mr. Duff was very proud of the operation which has been featured in many trade journeys and industry magazines. In 2009, the quarry was featured in Rock Products & Pit and Quarry Magazine as having one of the most advanced crushing operations in the United States. Mr. Duff has had a very active hand in developing and improving the Indian Lake area. He is credited for founding the Indian Lake Industrial park, which include World Class Plastics and West Ohio Tool and also was instrumental in the site selection process for the Transpiration Research Center in East Liberty, Ohio. He also was the vision behind the creation of Indian Meadows, one of the largest residential subdivisions at Indian Lake and recently his support for the revitalization of the Sandy Beach Bridge. Many of his achievements include siting on the Board of Directors of Ohio Ready Mix Concrete Association, Board of Directors of Ohio Aggregates & Industrial Minerals Association, Board of Directors Indian Lake Chamber of Commerce, Alumnus of the Year — Jackson Center High School, 2007.

“My grandfather lived every minute exactly the way he wanted — with heartfelt purpose.” Jason Duff

CONTINENTAL EQUIPMENT CORP. A division of AIS www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000 Fax: 517/321-4191

BRANDEIS MACHINERY & SUPPLY COMPANY

James Duff, president of C. E. Duff & Sons (now Duff Quarry Inc.) passed away on Sept. 16 in Bellefonte, Ohio.

Mr. Duff had been a member of the Ohio Aggregate & Industrial Minerals Association since April 1973. He leaves a legacy strongly rooted in improving the quality of life in his community his legacy and passion lives on in his family. His son Dave and grandson Ross have started a new premier waterfront development at Indian Lake — Longview Cove. “My grandfather lived every minute exactly the way he wanted — with heartfelt purpose,” said Jason Duff, adding that Mr. Duff deeply loved his family, friends and community. A service was held on Sept. 21 at Huntsville United Methodist Church in Huntsville, Ohio. In lieu of flowers the family has asked that donations be made in his name. Funds will be divided between the Huntsville Methodist, Huntsville Presbyterian, and the Herbert J. Block Foundation, a non profit that continues to be instrumental in the success of the James Cancer Center. Duff Quarry Inc. is an Ohio provider of crushed stone, sand and gravel who has been leading the way in crushing technology, customer service and support for more than 50 years. Mr. Duff is survived by his wife Sandy, two sons, Scott (Diane) Duff and Dave (Renee) Duff, four grandchildren, Jason Duff, Ross (Paige) Duff, Ashley (Jeremy) Sloan and Lauren Duff and one great-grandchild, Taylor Duff. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 502/499-3195 Fax Evansville, IN 812/425-4491 812/425-1171 Fax Corbin, KY 606/528-3700 606/528-9014 Fax Lexington, KY 859/259-3456 859/254-0783 Fax Stanville, KY 606/478-9201 606/478-9208 Fax Paducah, KY 270/444-8390 270/575-4907 Fax Indianapolis, IN 317/872-8410 317/872-8417 Fax Ft.Wayne, IN 260/489-4551 260/489-1620 Fax

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. 1001 S. 7th St. Trafficway Kansas City, KS 66105 913/371-3822 913/371-3870 Fax Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 73

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 906/786-5813 Fax Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 920/532-0526 Fax DeForest, WI 608/842-4151 608/842-4193 Fax Eau Claire, WI 715/874-5400 715/874-5401 Fax Franksville, WI 262/835-2710 262/835-2844 Fax Schofield, WI 715/355-9898 715/241-0044 Fax

GENERAL EQUIPMENT & SUPPLIES www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 701/364-2190 Fax 905 20th Avenue SE Minot ND, 58701 800/825-0479 3500 Apple Creek Road Bismarck, ND 58504 800/852-0479 4082 2nd Ave. W Williston, ND 58801 701/572-0570

PC490LC-10 From Komatsu - The Excavator Experts

The Komatsu PC490LC-10 provides more power, improved operator comfort and reduced fuel consumption. The excavator experts at Komatsu can help you complete jobs more quickly, while lowering your fuel and maintenance costs. t Efficient Komatsu Tier 4 Interim engine and advanced hydraulic system maximize productivity while providing up to 5% lower fuel consumption. t Increased lift capacity with a larger machine design and a reinforced undercarriage t Komatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.

www www.komatsuamerica.com .komatsuamerica.com

Page 74 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 75

Portable Power WE DO MORE THAN DESIGN EQUIPMENT.

WE POWER YOUR SUCCESS. Whether you are looking for products with the latest technology or you want to have your old machine remanufactured, Doosan Portable Power can help you acheive success. Focused on customer satisfaction and product solutions, our dealer network is the largest nationwide network in the industry. Contact your

local dealer today. Aspen Equipment Co.

McAllister Equipment Co.

9150 Pillsbury Ave. S Bloomington, MN 55420 (952) 888-2525

150 E. North Ave. Villa Park, IL 60181 (630) 530-7600 Alsip/Chicago, IL (708) 389-7700 E. Peoria, IL (309) 694-4455 Rockford, IL (815) 227-0555 Springfield, IL (217) 789-0351

Find Us on

Roland Machinery Co. 4670 Crossroads Industrial Drive Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252 Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Carterville, IL (618) 985-3399 DePere, WI (920) 532-0165 DeForest, WI (608) 842-4151 Eau Claire, WI (715) 874-5400 Franksville, WI (262) 835-2710 Schofield, WI (715) 355-9898 Escanaba, MI (906) 786-6920

800.633.5206

Central Power Systems & Services 9200 Liberty Drive Liberty, MO 60468 (816) 781-8070 Springfield, MO (417) 865-0505 Wichita, KS (316) 943-1231 Great Bend, KS (620) 792-1361 Liberal, KS (620) 624-7274 Salina, KS (785) 825-8291 Colby, KS (785) 462-8211

DoosanPortablePower.com

Page 76 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attendees Participate in Excavator Skills Competition MCCANN from page 46

Justin DiStefano (far R), owner of DiStefano Sales Co., shows his product lineup to Carl Post of Earth Systems and Rod Connelly, Plainfield Grading and Excavating. Jeffery Crane (L), president/CEO of Furukawa Rock Drill USA, and Dennis Kruepke, CEO McCann Industries, pose next to the Case SV300 skid steer with a Kent F6 hydraulic hammer.

Brian Wronski (L), Allen Engineering, shows the Allen SP425 riding trowel to Scott Odes of Asphalt Paving Professionals. Ken Schmidt (C), McCann Industries, shows this Case SV250 skid steer to Joaquin (L) and Alex Delatorre of Delatorre Concrete.

Ben McBurney of DeWalt shows the drilling power of the concrete drills.

This Remu L85 screening bucket attached to this Case SR250 skid steer was on display for the customers to test out.

Tim Callahan (L), Stihl Co., shows the lineup of concrete cutting saws to Kevin Brew of Brew Concrete.

Pages 77-93

Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Cat 826K Landfill Compactor Features Safety, Convenience The Cat 826 landfill compactor has set the design standard for this demanding application since 1978, and with the introduction of the K Series model, that design is further advanced in terms of operator comfort and safety, ease of operation, durability, reliability, low-cost operation, and productivity. Two Cat C15 ACERT engine options are available, meeting U.S. EPA Tier IV Final/EU Stage IV emission standards or U.S. EPA Tier III/EU Stage IIIA equivalent emission standards. It delivers 405 net horsepower (302 kW) to the 826K’s drive train, which uses a 2F/2R planetary power-shift transmission, lock-up torque converter, and heavy-duty planetary axles that can accommodate three new wheel-and-tip configurations. With an operating weight of 90,207 lbs. (40,917 kg), coupled with massive structures that remain solid through a number of rebuilds, the 826K is built for rugged durability, according to the manufacturer. For fuel-saving performance, the 826K features an Eco mode, which, when selected by the operator, limits engine speed and allows the machine to function in an auto-shift mode when maximum torque is not required. For operator convenience, the left pedal serves as a brake, transmission neutralizer and engine decelerator, which the operator can use to temporarily override the engine speed set with the throttle lock for safely maneuvering around obstacles. And for optimum responsiveness and control, the 826K’s STIC system allows single-lever steering and transmission control. Operator comfort and convenience is further accommodated in the design of the 826K with easier entrance and exit from the cab with lighted, shallow-angle stairways

and a STIC armrest that folds away. The Cat comfort series airsuspension seat features extra thick cushions and moves the attached electro-hydraulic STIC-control pod and implement-control pod when adjusted. The cab, isolationmounted to the frame, is pressurized with filtered air, and the selected temperature is maintained automatically. The control panel uses large, back-lit switches with LED indicators, and a simple twoposition rocker switch controls the parking brake. Drive Train/ Structures/Guarding The 826K delivers consistent, smooth shifting via integrated electronic controls that use the Caterpillar single clutch speed shifting system. The metallurgy and heat-treating incorporated into the transmission's gearing ensure consistent performance and long-term durability. The lock-up torque converter used in the 826K has several benefits, including more efficient transmission of power, lower system heat, increased travel speed and fuel efficiency. Further fuel savings are achieved with the C15’s engine idle shutdown system, and engine durability is enhanced with delayed engine shutdown. Because the landfill compactor works in the harshest of applications, Caterpillar has designed the machine with purpose-built structures that deliver long-term durability. The full-box-section rear frame resists twisting forces and shock, the steering-cylinder mounts are designed to effectively dissipate steering loads into the frame, and the axle mounts are heavy-duty components that contribute to the overall structural integrity of the machine. Specialized guarding protects

With an operating weight of 90,207 lbs. (40,917 kg), coupled with massive structures that remain solid through a number of rebuilds, the 826K is built for rugged durability, according to the manufacturer.

the 826K’s systems and components from jobsite hazards, such as debris build-up, chemicals, and wire and plastics that might wrap around wheel assemblies. Hydraulically actuated engine and power-train guards shield components and resist debris build up; front-frame guards further prevent trash build-up in the frames and add protection for hydraulic lines; axle-wrapping and seal guards reduce the prospect of material binding around the axles; a fine-mesh air-inlet screed prevents material from entering the engine compartment; an underhood ventilation system resists trash intrusion cools components; and striker bars and cleaner fingers help keep the wheels clean for optimum compaction effort. Wheels and Tips The 826K is available with three new wheel-and-tip configurations to improve machine performance and to meet individual landfill

applications. The paddle tip configuration is designed for greater traction with less weight, providing high performance coupled with reduced fuel burn. The plus tip is a conventional design that increases side-slope stability, and the combination tip provides a practical compromise of important elements — performance, fuel economy, and side-slope stability. Serviceability/Technology To promote the safety of personnel servicing the 826, routine maintenance points are grouped and accessible from ground level or from non-skid walkways with hand rails. Swing-out doors on both sides of the engine compartment provide easy access to daily service checks, and ecology drains simplify service and help prevent spills. An available swing-out stairway facilitates access to the engine. In addition, swing-out coolers for fuel and hydraulic fluid simplify cleaning, and a ground-

level power service center has an electrical-disconnect, emergencyengine-shutdown, and stairwaylight switches. To further complement serviceability, the Cat vital information system (VIMS 3G) integrated into the 826’s design keeps operators informed about machine operating conditions via an easy-to-view graphic display that features touchscreen interface. To expand machine-monitoring capability, the Cat Product Link system provides event and diagnostic codes, as well as data such as operating hours, fuel level, and idle time. This information is transmitted to a secure web-based application, VisionLink, which provides powerful tools for conveying information to machine owners and dealers, including working time versus idle time and mapping functions. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 78 • October 11, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Terex AggreSand 165 Washplant Celebrates First Birthday Terex Washing Systems (TWS) is celebrating the first birthday of the Terex AggreSand 165 washplant following the official launch in Ireland in September 2013. A lot has been achieved in the last year, with the successful installation of the AggreSand 165 washplant in five continents over 10 countries, processing up to 11 million tons (10 million t). Garry Stewart, application team lead, TWS, said, “The market has really embraced the AggreSand washplant concept with exceptional demand at the moment. To date, TWS has installed multiple AggreSand 165 washplants around the globe. We are constantly looking at innovative ways to further enhance and develop our existing products so we can continue to meet the individual needs of our customers.” TWS hosted a number of events in 2013 to officially launch the AggreSand 165 in both Ireland and USA. The AggreSand 165 also was displayed as part of a double bill at the Hillhead 2014 show, UK. The most recent event to showcase the AggreSand 165 was at the first of several planned open days in 2014 in the Australia market. The event was hosted by Dubbo Sands, NSW, Australia, where the plant was recently installed. Owners Mardi and Graham Colbran, said “The professionalism and dedication from TWS and Mineral Washing Systems [one of TWS Australian distributors], starting with purchasing right through to commissioning has been outstanding; we feel that there is nothing else currently on the market, that even comes close. We chose the AggreSand 165 washplant for ease of setup, having the ability to minimize disruption to our site. Our AggreSand 165 washplant incorporates the pre wash system, which enables us to bring our sand into spec in just one pass, whilst producing three aggregates, giving us a very cost effective operation. The quality of design and construction of this plant is easily seen, a lot of thought has gone into access for servicing to pumps, screens, and the controls, including remote operation from the loader, all of which are user friendly. This plant demon-

Terex Washing Systems is celebrating the first birthday of the Terex AggreSand 165 washplant following the official launch in Ireland in September 2013.

strates what washing sand should be, easy. We are positive ours will be the first of many hitting Australian shores.” The introduction of the AggreSand 165 concept was in response to both changes in the marketplace and customer demands, which consists of the AggreSand 165 washplant model and the larger capacity, AggreSand 206 washplant. Central to the development of the AggreSand concept was modular design, serviceability and functionality, making it quick and easy to set-up and easy to maintain. Customers also benefit from the unique design, which includes full containerization of the machine for ease of transportation, rapid set-up time, pre-wired and pre-plumbed plug and play componentry, isolated spray bars and a simple automated control system, all of which have

been delivering efficient, productive performance for current owners, according to the manufacturer. The ongoing TWS commitment to meeting customers’ needs saw the introduction of another new pioneering product in 2014, the AggreScrub 150, designed to operate both as a stand-alone unit as well as having the ability to seamlessly integrate with the AggreSand. The AggreScrub 150 is designed to deal with stubborn clay bound material which cannot be removed by rinsing or screening alone. The AggreScrub product is shortlisted as a finalist in the “World Demolition Awards 2014”, in the “Innovation — Series Product” category. Winners will be announced at an awards ceremony on Nov. 7. The Terex Aggwash plant was the winner of this particular category in 2010. Since TWS was established in

July 2012, the company has gone from strength to strength and is now firmly established as one of the leading material and mineral washing solution providers in the global marketplace. The introduction of three new products over the last year demonstrates the ongoing TWS commitment to meeting customers’ needs through providing pioneering ways to wash sand, gravel, aggregates, wood and C&D waste. As a result of this growth and in response to market demands, TWS has expanded the team globally to provide a full and dedicated line of support for the TWS distributor network and customers. Product Line Director of TWS Sean Loughran said: “We are delighted to continually welcome new talented and skilled team members to the TWS team. The experience they bring will ensure

TWS offers the same quality support and services locally as well as in our other centers of excellence in USA and India. TWS is committed to providing first class service, expertise and knowledge in the field of mineral and material washing from initial concept of plant ideas through to after sales service and support.” TWS looks forward to more successful months and years ahead and will continue to focus on introducing further innovative and new solutions for quarry, aggregate, mining and C&D recycling industries, continually meeting customers’ needs and specific washing demands. For more information, visit www.terex.com/washing. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 11, 2014 • Page 79

One crusher One screen One Lokotrack®

Lokotrack® LT220D™ Metso revolutionizes crushing with the new Lokotrack® LT220D™, combining a highproduction 3-deck screen and industry-leading Metso cone crusher in one compact, selfpropelled track unit. The high-efficiency LT220D™ is truly a game-changer: slashing capital, fuel/maintenance, transport, and overall operating costs. Call your Metso distributor today to learn more or see the innovative new LT220D™ in action! www.metso.com/lokotrack www.facebook.com/lokotrack

BUTLER MACHINERY CO. www.butlermachinery.com 3402 36th St. SW Fargo, ND 58014 701-280-3100 800-726-7475 3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. 46 St. Grand Forks, ND 58201 701-775-4238 th

1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508

4950 E Highway 12 Aberdeen SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

RB SCOTT COMPANY INC. www.rbscott.com 1011 Short St. Eau Claire, WI 54701 715-832-9792 Fax: 715-832-7767

CENTRAL SERVICE & SUPPLY, INC. www.centralsands.com 4219 E. 50th St. Des Moines, IA 50317 800-247-2400 515-964-8600 Fax: 515-309-0667

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuilders machinery.com 1001 S. 7th St. Trafficway Kansas City, KS 66105 913-371-3822 Fax: 913-371-3870 4115 S. 90th St. Omaha, NE 402-331-9200 5601 Fletcher Ave. Lincoln, NE 402-325-0447 4949 Juergen Rd. Grand Island, NE 308-384-2620

AIS CONSTRUCTION EQUIPMENT CORP. 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Fax: 517-321-4191 www.aisequip.com

Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583

Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449

Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257

Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311

West Detroit, MI 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

Page 80 • October 11, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Bandit Industries Offers New Model 2600, 2700 Towable Stump Grinders

3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 7910 Highway 2W Devils Lake, ND 58301 701-665-3800 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 3402 36th St. SW Fargo, ND 58104 701-280-3100 800-726-7475

1201 S. 46th St. Grand Forks, ND 58201 701-775-4238 17040 Hwy 11 Hankinson, ND 58041 701-242-7474 7695 Highway 18 S. Hoople, ND 58243 701-894-6363 1910 27th Ave SE Jamestown, ND 58401 701-251-1400 1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508

4950 E. Highway 12 Aberdeen, SD 57401 605-225-6240 1715 US Hwy 14 W. Huron, SD 57350 605-353-1200 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

www.fabco.com

LaCrosse, WI 608-783-4891 Eau Claire, WI 715-874-5100 Wausau, WI 715-359-6220

Green Bay, WI 920-498-8000 Superior, WI 715-398-9696 Marquette, MI 906-475-4191

Jefferson City, MO 800-845-9177 Springfield, MO 888-959-2100 Joplin, MO 866-313-1748 Willow Springs, MO 866-628-1717 Cape Girardeau, MO 800-845-9175

Marion, IL 800-845-9179 Metropolis, IL 866-299-6044 Salem, IL 800-845-9176 Troy, IL 866-345-5681 Mt. Carmel, IL 888-769-7247

11200 W. Silver Spring Rd. Milwaukee, WI 53225 414-461-9100 Fax: 414-461-8899 Madison, WI 608-271-6200

www.fabickcat.com One Fabick Drive Fenton, MO 64026 800-845-9188 Foristell, MO 800-539-9217 Columbia, MO 800-791-5401

With hydrostatic direct-drive there are no belts, jackshafts, bearings or associated parts to maintain, making the operation and maintenance of these machines extremely simple.

For stump grinding professionals who prefer the simplicity of towable stump grinders but are tired of constant belt adjustments and maintenance, Bandit Industries presents the Model 2600 and Model 2700 towable stump grinders. These machines combine aggressive horsepower in compact, lightweight designs that makes stump grinding as easy as driving to the job site. Available with numerous options and reliable, beltless hydrostatic drive, the Model 2600 and Model 2700 each are exceptional performers for rental companies, municipalities and stump grinding professionals, according to the manufacturer. “The Model 2600 and Model 2700 towable stump grinders are very easy to tow, and their simplicity is still very popular with many of our customers,” said Christopher Smith, marketing and communications director of Bandit Industries. “The wide swing arc and adjustable tongues really help these machines to grind even large stumps without needing to reposition the whole unit. And the hydrostatic drive is definitely a big plus when it comes to lowering maintenance costs." With hydrostatic direct-drive there are no belts, jackshafts, bearings or associated parts to maintain, making the operation and maintenance of these

www.zieglercat.com

The Model 2700 features a 97- or 115-hp diesel engine.

machines extremely simple. Power application with hydrostatic directdrive is typically much smoother than traditional belt driven stump grinders, making the Model 2600 and Model 2700 a breeze to operate from swingout control panels or optional radio remotes. The Model 2600 features a 61-hp diesel engine, and the Model 2700 features a 97- or 115-hp diesel engine. Both machines ride on a rugged Torflex axle and go after stumps with swing arcs greater than 5 ft. (1.5 m). Both come standard with the Revolution cutter wheel, and both fea-

ture telescoping tongues to help finetune their position at the stump. Bandit Industries is a global manufacturer of wood processing machinery, ranging from industrial-grade hand-fed and whole tree wood chippers, horizontal grinders, stump grinders, forestry mowers and other specialty processing equipment. All equipment is manufactured by specialized teams at the company’s headquarters near Mount Pleasant, Mich. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

MINNESOTA BEMIDJI* 5426 Hwy 71 North Bemidji, MN 56601 877-829-9850 BRAINERD 3311 Liberty Lane Brainerd, MN 56401 218-829-9800 BUHL 10081 East Hwy 169 Buhl, MN 55713 218-258-3232 COLUMBUS 13822 West Freeway Drive Columbus, MN 55038-9705 651-982-5600 CROOKSTON 720 3rd Ave SW Crookston, MN 56716-0538 218-281-4245 DULUTH 210 Garfield Ave. Duluth, MN 55802-2696 218-722-6628 FERGUS FALLS 3502 State Hwy 210 West Fergus Falls, MN 56537-4003 218-736-2680 JACKSON 191 Industrial Parkway Jackson, MN 56143 866-847-6401 MANKATO 2145 Howard Drive West Mankato, MN 56003 507-388-1444 MARSHALL 1200 North Hwy 59 Marshall, MN 56258-2761 507-532-4403 MINNEAPOLIS 901 West 94th Street Minneapolis, MN 55420-4236 952-888-4121 ROCHESTER 6340 Hwy 63 South Rochester, MN 55904-8414 507-285-1775

SHAKOPEE 8000 County Road 101 East Shakopee, MN 55379 800-352-2812 ST. CLOUD 2225 255TH Street St. Cloud, MN 56301-8742 320-253-2234 IOWA ALTOONA 1500 Ziegler Drive NW Altoona, IA 50009-7200 515-957-3800 PARTS EXPRESS 515-957-3843 800-752-0856 ZIEGLER RENTAL 1600 Ziegler Drive NW Altoona, IA 50009-7200 515-957-3828 888-270-6258 Fax: 515-957-3881 ATLANTIC 951 Park Drive Atlantic, IA 50022 712-243-1039 877-547-3819 FORT DODGE 3366 5TH Ave. South Fort Dodge, IA 50501-6428 515-576-3161 800-342-1848 MASON CITY 11490 265TH Street Mason City, IA 50401-9656 641-423-7240 800-342-1849 POSTVILLE 308 North Lawler Postville, IA 52162-7802 563-864-7461 800-526-0889 SHELDON 102 Crossroads Drive Sheldon, IA 51201 712-324-5604 855-344-5604 SIOUX CITY 5300 Harbor Drive Sioux City, IA 51111-1114 712-252-4401 800-342-1847

*Parts and rental only

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 11, 2014 • Page 81

www.whayne.com 1400 Cecil Ave Louisville, KY 502-774-4441 Ashland, KY 606-928-3444 Bowling Green, KY 270-843-3275 Corbin, KY 606-528-3140 Dry Ridge, KY 859-823-1500

www.altorfer.com 2600 6th Street S.W. Cedar Rapids, IA 52404 319-365-0551 Fax: 319-365-5639 4712 Buckeye St. Davenport, IA 52802 563-324-1935 Fax: 563-324-2409 #1 Capitol Dr. East Peoria, IL 61611 304-694-1234 Fax: 309-694-4148

Evansville, IN 812-425-4651 Hazard, KY 606-439-4040 Lexington, KY 859-254-2756 Paducah, KY 270-443-3631 Pikeville, KY 606-437-6265

4200 Rodger Street Springfield, IL 62705 217-529-5541 Fax: 217-529-0020 1519 W. Kenyon Rd. Urbana, IL 61801 217-539-1671 Fax: 217-359-6310 3520 Moberly Ave. Hannibal, MO 63401 573-221-8600 Fax: 573-221-7187 701 Highway 24W Moberly, MO 65270 660-263-8200 Fax: 660-263-8203

www.macallister.com 7515 East 30th St. Indianapolis, IN 46219 800-382-1896 Fort Wayne, IN 800-944-0847 South Bend 800-685-9849 Lafayette, IN 800-283-4231 Washington, IN 800-932-5120 Terre Haute, IN 800-273-5650

www.ohiocat.com Cleveland, OH 440-526-6200 800-837-6200 Fax: 440-526-9513 Cadiz, OH 740-942-4626 800-837-6204 Fax: 740-942-4029 Canton, OH 330-478-6525 800-837-6207 Fax: 330-478-6529 Cincinnati, OH 513-771-0515 888-332-4658 Fax: 513-672-7658 Columbus, OH 614-878-2287 888-441-4658 Fax: 614-851-5015

Toledo, (Perrysburg) OH 419-874-7975 888-339-4658 Fax: 419-873-8255 Troy, OH 937-335-7660 888-330-4658 Fax: 937-335-6447 Youngstown, OH 330-530-9010 800-837-6203 Fax: 330-530-9102 Zanesville, OH 740-453-0563 800-837-6205 Fax: 740-452-3605 Richwood, KY 859-372-4665 888-446-4658 Fax: 859-372-4659

Cat.com © 2014 Caterpillar • All Rights Reserved • Printed in USA logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as CAT, CA ATERPILLAR, TERPILLAR, BUILLT T FOR ITT,, their respective resp corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Page 82 â&#x20AC;˘ October 11, 2014 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ Recycling Section â&#x20AC;˘ Construction Equipment Guide

5)& 0/-: 5)*/( 4530/(&3 8*-- #& :063 #0550. -*/&

t #364) $)*11&34 t 456.1 (3*/%&34 t 8)0-& 53&& $)*11&34 t #&"45 3&$:$-&34 t '03&453: .08&34

The industryâ&#x20AC;&#x2122;s toughest, longest lasting woood processing equipment is available through th the worldwide network of authorized Bandit dealers. ale Contact yours today and see how a Bandit dit chipper,, grinderr,, or recycler can help boost your operationâ&#x20AC;&#x2122;s bottom line.

1-800-952-0178

#"/%*5$)*11&34 $0. # "/%*5$)*11&34 $0.

SMALL EQUIPMENT DEALERS (BRUSH CHIPPERS, STUMP GRINDERS, ARBORVVAC)

N. River 50505050 N. River Rd. Rd. Schiller IL 60176 Schiller Park, Park, IL 60176 847-678-3633 847-678-3633 847-678-3587 Fax: Fax: 847-678-3587 Mokena, IL Mokena, IL 708-596-8050 708-596-8050 West Chicago, IL West Chica go, IL 630-293-0606 630-293-0606

WWauconda, auconda, IL IL 847-526-4255 847-526-4522 YYorkville, orkville, IL IL 630-553-0150 630-553-0150

www.atlasbobcat.com www.atlasbobcat.com

1800 13 1800W. W. Hwy Hwy 13 Burnsville, 55337 Burnsville, MN MN 55337 952-894-0894 952-894-0894 877-262-2284 877-262-2284 3101 Spruce St. 3101 Spruce Little Canada, MNSt.55117 Little651-407-3727 Canada, MN 55117 651-407-3727 877-331-0295 877-331-0295

LARGE EQUIPMENT DEALERS (BEAST (BEAST, WHOLE TREE CHIPPERS, FORESTRY MOWERS)

745 Exchange 745 Exchange DriveDrive Hudson, WI 54016 Hudson, WI 54016 715-531-0801 715-531-0801 866-268-2418 866-268-2418 NEW LOCATION COMING www .tristatebobca t.com SOON! 1200 East Hwy 13 Burnsville, MN 55337 952-894-0894 www.tristatebobcat.com

CoAshland, wen, WV KY 606-928-3477 304-226-3299 Beaver,, WV Cowen, WV 304-255-1525 304-226-3299 Cross Lanes, WV Beaver, WV 304-204-1818 304-255-1525 Fairmont, WV 304-534-5454 Cross Lanes, WV

Fairmont, WV Norton, WV 304-534-5454 304-226-3299 Pikeville, WV

Norton, WV 304-255-1525 304-636-6421 Marietta, OH

Pikeville, KY 304-204-1818 606-432-0321 www.lec1.com www.lec1.com

304-204-1818

For large equipment inquiries in OH, IN,, KY KY, Y, IL,, IA,, MN, Y, M WI and MI,, or if your region is not represented above,, please call us or visit us online for assistance.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 11, 2014 • Page 83

Attachments can make your machine more valuable. Allied offers a wide assortment of attachments to fit all of your makes and models of excavator, loader/backhoe, mini-excavator, skid-steer or compact track loader machines. Allied has become attached to your machines. Allied’s construction and demolition attachments are productive and dependable. State-of-the-art technology.Full product line. Competitive price and performance. Allied offers innovative, problem-solving capabilities. Commitment to product availability. Superior product support. Strong Distributor network. Most of all Allied meets and exceeds customer performance expectations. To put a high performance Allied attachment on your machine, call us at 1-800-321-1046 or visit AlliedCP.com for the name of a Distributor nearest you. We’ve become attached to your machines.

CONSTRUCTION MACHINERY COMPANY www.cmcky.com 2911 S. English Station Rd. Louisville, KY 40299 502-267-4020 866-901-2262 Fax: 502-261-9251

2235 Ragu Drive Owensboro, KY 42303 270-683-2000 877-683-2262 Fax: 270-683-3727 267 W. Jay Louden Rd. Carrollton, KY 41008 502-732-4661 Fax: 502/732-8355

ILLINOIS TRUCK & EQUIPMENT

HOWELL TRACTOR AND EQUIPMENT

www.iltruck.com 320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486

www.howelltractor.com 480 Blaine St. Gary, IN 46406 800-852-8816 Fax: 219-977-6395 2770 May Rd. Peru, IL 61354 815-224-3003 Fax: 815-224-2538

Page 84 • October 11, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Downloadable Brochure Highlights Eriez Equipment

L L I H E H T F O G N I K www.superior-ind.com

At Superior, we’re constantly searching for new ways to use our knowledge of bulk material handling systems to solve challenges and improve production. We’re driven by curiosity, loaded with determination and energized by progress. How can we help you?

Proud partners of General Equipment & Supplies

Fargo, ND

Bismarck, ND

Minot, ND

4300 Main Ave. Fargo, ND 58103 800-437-2924 Local: 701-282-2662 Fax: 701-364-2190

3500 Apple Creek Road Bismarck, ND 58504 800-279-4437 Local: 701-223-9700 Fax: 701-223-4815

905 20th Ave. SE Minot, ND 58701 800-825-0479 Local: 701-852-0479 Fax: 701-852-1451

Sioux Falls, SD

Shakopee, MN

Williston, ND

3902 N Jessica Ave. Sioux Falls, SD 57104 Local: 605-336-9000 Fax: 605-336-0073

4600 Valley Industrial Blvd S Shakopee, MN 55379 800-966-1455 Local: 952-224-1500 Fax: 952-224-1570

4082 2nd Ave. W. Williston, ND 58801 Local: 701-572-0570 Fax: 701-572-0510

Official dealer partner of Superior Industries in North Dakota, South Dakota, Minnesota, Iowa & Nebraska

The full-color, six-page piece is designed to help aggregates customers quickly and easily find the right products to reliably move materials and protect expensive equipment from costly damage caused by tramp metal.

The Eriez “Equipment for the Aggregates Industry” brochure is now available for immediate download from the company’s Web site. The full-color, six-page piece is designed to help aggregates customers quickly and easily find the right products to reliably move materials and protect expensive equipment from costly damage caused by tramp metal. With detailed product descriptions and images, the literature offers a comprehensive overview of the innovative material handling, magnetic separation and metal detection equipment Eriez offers to meet the rugged demands of the aggregates industry. A full-page flowchart illustrates the various locations and types of Eriez equipment utilized in a typical aggregates processing plant. The “Equipment for the Aggregates Industry” brochure also features a brief case study that describes how one well-known rock processor successfully incorporated an Eriez Series 7000 suspended electromagnet

to eliminate tramp metal contamination that was damaging their expensive crushers. Equipment showcased in the literature includes Metalarm metal detectors, 1200 series metal detectors, suspended and permanent magnetic separators, magnetic pulleys, magnetic drums, vibratory feeders, conveyors and screeners and bin vibrators. The back-page of the brochure offers information on Eriez’ quick-ship program for magnetic separators and spotlights the company’s history, global presence and engineering capabilities. To download Eriez’ “Equipment for the Aggregates Industry” brochure in PDF format, visit http://eriez.com/Markets/ Index/Aggregate. To obtain a hard copy, contact Eriez and request brochure B-48. For more information, call 888/300ERIEZ (3743) or visit www.eriez.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 11, 2014 • Page 85

POWERSCREEN WARRIOR 2100

The Warrior 2100 is engineered to include the proven Triple Shaft technology which is unique to Powerscreen heavy duty mobile screens. The triple shaft design ensures that the 16’ x 5’ screen box is highly efficient while maintaining exceptional throughput productivity.

Check out our new Finance Rates 12 Months - 0% 24 Months - 0% 36 Months - 0% 48 Months - 1.99% 60 Months - 2.99% Subject to credit approval through TFS

We are pleased to announce Powerscreen Central as the exclusive Powerscreen dealer for the MidWest.

1-800-227-0534 • 816-805-4677 www.powerscreencentral.com sales@powerscreensales.com

Page 86 • October 11, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

CRUSHING PLANTS

We Call It EXPERTISE. You Call It PEACE OF MIND.

SCREENING Plants

IROCK knows the demands of your industry. Not just because we hear it, but because we’ve seen it and lived it, too. Our team of experts has years of hands-on experience working in your business and providing superior service. So when it comes to increasing efficiencies, reducing wear and boosting your bottom line, we're confident we have the right answers.

Closed-circuit PLANTS

For more information, call 866-240-0201 or see our equipment in action at www.irockcrushers.com.

w w w. i r o c k c r u s h e r s . c o m

Crush. Classify. Profit.

Beast 3680XP, 4680XP Power Through Coastline Vegetation Beast horizontal grinders have always been ahead of the pack when it comes to processing dense, stringy green waste like palms, vines and coastal vegetation. This type of material can be a challenge to process for any machine, but new options and designs for the Model 2680XP, 3680XP and 4680XP Beast Recyclers allow these machines to excel in this type of grinding application, according to the manufacturer. The changes begin with the cuttermill, which features a 30-tooth setup with 2-in. (5 cm) wide teeth as opposed to the standard 60tooth, 1-in. (2.5 cm) wide arrangement. While a 60-tooth set up is still the best for grinding larger diameter wood, in leafy/stringy material void of larger material the 30-tooth setup is extremely efficient. The mill RPM also is increased, which helps clear the mill faster, while the mill housing itself is opened up. Increased tolerances and a larger screening area The cuttermill features a 30-tooth setup with 2-in. (5 cm) wide teeth as opposed to the standard add to the overall machine 60-tooth, 1-in. (2.5 cm) wide arrangement.

throughput, delivering a better endproduct quicker, and with lower fuel consumption. Also, a new proportional drive system for hydraulics on the Beast's feed system will help deliver maximum feeding rates without overfeeding the machine. This new system will monitor engine loads and automatically adjust the feed rate to match. The new system has the ability to not only proportionally feed, but can also switch over to six different feed speeds with the touch of a button for people desiring the most uniform products possible. As a result of these enhancements and options, operators can utilize Beast recyclers to quickly and efficiently process coastal vegetation, viney material and similar green waste that is often problematic with other machines. For more information, call 800/952-0178 or visit www.banditchippers.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 11, 2014 • Page 87

THE LEADER IN TECHNOLOGY: THE NEW MC 110 EVO

MC 110 Zi EVO Continuous Feed System

MC 110 Ri EVO High-tech jaw crusher

Direct drive via fluid clutch

High production, quality product with maximum efficiency, the all new Kleemann EVO jaw crusher.

ROAD AND MINERAL TECHNOLOGIES

Shepherdsville, Kentucky P.O. Box 6588 335 Saltwell Drive Shepherdsville, KY 40165 Toll Free: 877-538-3221 Phone: 502-543-3746 Fax: 502-543-3716

Evansville, Indiana Fort Wayne, Indiana Indianapolis, Indiana Corbin, Kentucky Lexington, Kentucky Louisville, Kentucky Paducah, Kentucky Stanville, Kentucky

www.wirtgenamerica.com Carterville, Illinois 1505 Donna Drive Carterville, IL 62918 Phone: 618-985-3399

Escanaba, Michigan 2600 S Lincoln Road Escanaba, MI 49829 Phone: 906-786-6920

Eau Claire, Wisconsin 7417 Margaret Lane Eau Claire, WI 54703 Phone: 715-874-5400

Springfield, Illinois 816 N Dirksen Parkway Springfield, IL 62702 Phone: 217-789-7711

Marengo, Illinois 18210 Beck Road Marengo, IL 60152 Phone: 815-923-4966

DeForest, Wisconsin 604 Stokely Road DeForest, WI 53532 Phone: 608-842-4151

Franksville, Wisconsin 2916 N Sylvania Ave Franksville, WI 53126 Phone: 262-835-2710

Bolingbrook, Illinois 220 East Frontage Road Bolingbrook, IL 60440 Phone: 630-739-7474

Portage, Indiana 6550 Melton Road Portage, IN 46368 Phone: 219-764-8080

DePere, Wisconsin 3275 French Road DePere, WI 54115 Phone: 920-532-0165

Schofield, Wisconsin 9808 Weston Avenue Schofield, WI 54476 Phone: 715-355-9898

Bridgeton, Missouri 4670 Crossroads Industrial Dr. Bridgeton, MO 63044 Phone: 314-291-1330 Cape Girardeau, Missouri 3364 Percy Drive Cape Girardeau, MO 63702 Phone: 573-334-5252

Columbia, Missouri 4110 I-70 Drive SE Columbia, MO 65201 Phone: 573-814-0083 Palmyra, Missouri 701 Industrial Drive Palmyra, MO 63461 Phone: 573-769-2056

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 800-352-2757

Page 88 • October 11, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Alta Equipment Company www.altaequipment.com 28775 Beck Rd. Wixom, MI 48393 (248) 449-6700 Fax: (248) 449-6701 2470 W. Columbia Ave. Battle Creek, MI 49015 (269) 965-1269 Fax: (269) 965-1881 8840 Byron Commerce SW Byron Center, MI 49315 (616) 878-7450 Fax: (616) 878-7650 4716 Talon Ct. S.E. Kentwood, MI 49512 (616) 698-2960 Fax: (616) 698-2901 6327 Jomar Ct. Lansing, MI 48917 (517) 272-5033 Fax: (517) 272-7257 5920 Grand Haven Rd. Muskegon, MI 49441 (231) 798-8754 Fax: (231) 798-9387 28855 Smith Rd. Romulus, MI 48174 (734) 641-8238 Fax: (734) 641-8334 1524 Champagne Dr. Saginaw, MI 48604 (989) 752-9400 Fax: (989) 752-9834 7500 E. 15 Mile Rd. Sterling Hts., MI 48312 (586) 977-6000 Fax: (586) 977-6099 476 US 31 South Traverse, MI 49685 (231) 943-3700 Fax: (231) 943-8110 56195 Pontiac Trail New Hudson, MI 48165 (248) 356-5200 Fax: (248) 356-2029 9433 Riley St. Zeeland, MI 49464 (616) 748-4108 Fax: (616) 748-4120

Murphy Tractor & Equipment Co. www.murphytractor.com 5087 E. Broadway Ave. Des Moines, IA 50317-4744 Toll Free: (800) 822-2212

8600 NE Parvin Rd. Kansas City, MO 64161-8300 Toll Free: (888) 306-3434

1509 Raff Rd. SW Canton, OH 44710-2321 Toll Free: (866) 235-0438

1303 3rd Ave. NW Fort Dodge, IA 50501-2257 Toll Free: (800) 362-2487

1401 S. State Highway MM Springfield, MO 65802-7726 Toll Free: (888) 306-2656

5775 US Highway 23 Chillicothe, OH 45601-9562 (740) 663-5300

4900 Harbor Dr. Sioux City, IA 51111-1106 Toll Free: (800) 352-4693

220810 Hwy 92 Gering, NE 69341-5236 Toll Free: (800) 205-6784

11441 Mosteller Rd. Cincinnati, OH 45241-1829 Toll Free: (800) 844-3734

3469 W. Airline Hwy Waterloo, IA 50703-9594 Toll Free: (800) 772-2019

3204 S. Engleman Rd. Grand Island, NE 68803-6621 Toll Free: (800) 868-4017

2121 Walcutt Rd. Columbus, OH 43228-9575 Toll Free: (800) 222-2010

10893 112 Rd. Dodge City, KS 67801-6585 Toll Free: (800) 794-0172

6100 Arbor Rd. Lincoln, NE 68517-3211 Toll Free: (800) 416-5518

3550 Saint Johns Rd. Lima, OH 45804-4017 Toll Free: (800) 423-7445

325 S. Highway 281 Great Bend, KS 67530-9621 Toll Free: (800) 264-4056

3701 S. Jeffers St. North Platte, NE 69101-7844 Toll Free: (800) 894-7060

811 Callendar Blvd. Painesville, OH 44077-1218 Toll Free: (866) 800-1398

5255 N Deere Rd Park City, KS 67219 Toll Free: (800) 262-0139

9751 S. 148th St. Omaha, NE 68138-3898 Toll Free: (800) 416-5095

590 E. Western Reserve Rd. Bldg 3 Poland, OH 44514-3393 Toll Free: (866) 503-7259

1621 NW Gage Blvd. Topeka, KS 66618-2831 Toll Free: (800) 279-6087

1240 Industrial Pkwy N. Brunswick, OH 44212-4317 Toll Free: (800) 716-9796

1015 Industrial Park Dr. Vandalia, OH 45377-3117 Toll Free: (800) 233-4228

1410 W. Oklahoma Ave. Ulysses, KS 67880 Toll Free: (800) 472-9238

60611 Hulse Rd. Cambridge, OH 43725-8937 (740) 439-2747

20400 Route 19 Cranberry Township, PA 16066 (724) 776-3636 1973 Route 66 Greensburg, (Delmont) PA 15601-9297 (724) 837-4500

Brandeis Machinery & Supply Co. www.brandeismachinery.com Evansville, IN (812) 425-4491 Ft. Wayne, IN (260) 489- 4551 Indianapolis, IN (317) 872-8410 Corbin, KY (606) 528-3700 Lexington, KY (859) 259-3456 Louisville, KY 502) 491-4000 Paducah, KY (270) 444-8390 Stanville, KY (606) 478-9201

Indeco Launches ISS 35/60 Steel Shear to Lineup Indeco North America, a provider of heavy-duty hydraulic breakers, compactors, crushers and pedestal booms for demanding demolition, mining, recycling and road construction applications, introduced its ISS 35/60 steel shear product. Effectively rounding out the company’s popular ISS steel shear product line for the scrap and recycling industry, the Indeco ISS 35/60 steel shears feature a dual-profile piercing tip, four reversible, interchangeable main cutting blades, an extremely wide jaw opening and continuous 360 degree rotation. It is positioned to satisfy increased customer demand for a shear that can be used with a 35-ton (31.7 t) excavator as a second member or for a 60-ton (54 t) carrier as a demolition attachment. “We’re very excited to be able to offer our customers this latest addition to our performance-proven ISS line of steel shears,” said Mike Fischer, president and chief executive officer of Indeco North America (INA). “This new addition, with its unique jaw geometry and increased power, provides an extremely cost-effective alternative for heavy-duty scrap and recycling applications and makes our steel shear portfolio one of the most comprehensive in the industry.” INA director of marketing Ryan Murphy added, “Indeco North America is proud to continue to support our scrap and recycling customers with innovative technology solutions for their most demanding projects. This latest product offering reflects our ongoing commitment to technological innovations that exceed our customers’ expectations today and in the future.” The new ISS 35/60 is the culmination of more than 20 years of engineering and manufacturing expertise. It combines all of the marketrecognized features of the ISS product line including a special HARDOX main body frame, an integrated regeneration valve which accelerates no-load movement of the jaw; a pivot group which prevents the jaws from buckling; and a large, powerful hydraulic cylinder with long-lasting seals that can withstand more than 10,000 psi of pressure. Its design readily accommodates a broad range of carriers, according to the manufacturer. For more information, visit www.indeco-breakers.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) The Indeco ISS 35/60 steel shears feature a dual-profile piercing tip, four reversible, interchangeable main cutting blades, an extremely wide jaw opening and continuous 360 degree rotation.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 11, 2014 • Page 89

GET A HANDLE ON OPERATING COSTS Penn Jersey Mac hinery

TTerex erex® Fuc Fuchs hs Ma Material terial Handlers

Purpose-built for your scrap yard, transfer station or mill yard, Terex® Fuchs material handlers help you get a handle on your business with: Ê Ê

Ê Ê

Ê Ê Ê

An average 11% reduced fuel consumption versus competitive material handlers An average 45% lower cost of ownership at 1000 hrs versus titi t i l h dl

Deptford, NJ 856-227-6400

Chadwick-Baross Chelmsford, MA 800-804-0775

htown, NJ COMPANY WRENCHBangor , M EEQUIPMENT Frenc SARGENTS EQUIPMENT LUBY www.companywrench.com 8 00-6 9 8-4SERVICES 838 Ê & REPAIR Ê Ê Ê 9 0 8-824-4200 Ê SERVICE Ê Ê www.sargentsequipment.com

PA A 281Lionville, E. Sauk Trail P Chicago Heights, IL 60411 63-9200 61 0-3 708-758-2062 • Fax: 708-758-1345 155 Industrial Dr. Gilberts, IL 60136 847-844-4131

4805 Scooby Lane NW Carroll, OH 43112 866-262-4181 • Fax: 740-687-9130 Cleveland Branch 525 Golden Oak Pkwy Oakwood Village, OH 44146 440-439-4567 • Fax: 440-439-1789

199 Airport Road

Piketon Branch 3668 US Route 23 South Piketown, OH 740-289-3294

2999 Mexico Rd. O’Fallon, MO 63366 636-332-9970

Staten Island, NY 718 448 2444

Westbrook, Westbrook, e Cape Girardeau, M E MO 63702 573-334-9937 800 0 262-571 4

Cincinnati Branch 3120 S. Verity Pkwy. Middletown, OH 45044 513-649-8105 • Fax: 513-649-8107 7019 Brookville Rd. Indianapolis, IN 46239 317-375-7790 • Fax: 317-375-7792

terex.com/construction

www.lubyequipment.com

Caribou, 2300 M ECassens Dr. Fenton, MO 63026 7 0-25 47 800-2 636-343-9970 • Fax: 636-343-4811

2625 North 24th St. Quincy, IL 62305 217-222-5454 4375 Camp Butler Rd. Springfield, IL 62707 217-744-2233 8853 Petroff Dr. Caseyville, IL 62232 618-397-9971

Page 90 • October 11, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

CRUSHING

MATERIAL HANDLING

SCREENING

TRACKS

WASHING & CLASSIFYING

Integrity. Generation After Generation.

www.rmsequipment.com q p

After being in business for almost a century, we’ve learned a thing or two. We know what it takes to keep your operation running smoothly: Commitment from your crew, quality equipment that works as hard as you do, and people that you can count on. Generation after generation, we continue to meet the demands of the job by building innovative products. We’ve led the way since 1928, and that leadership shows through in the integrity of our team. We’re proud to still be doing business the way we did back then.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 11, 2014 • Page 91

Purpose-built

from the ground up by Material handlers from SENNEBOGEN – 444,000 4,000 llbs. bs. tto o 75 7750,000 0,000 llbs. bs. Simple S imple design… design… Lift Lift more. morre. Mov Movee faster.. Save Save fuel. fuel. Run Run longer. ALTA EQUIPMENT COMPANY www.altaconstructionequipment.com

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com

Muskegon, MI 231-798-8754

Sterling Hts, MI 586-977-6000

Kentwood, MI 616-698-2960

Traverse, MI 231-943-3700

Battle Creek, MI 269-965-1269

Louisville, KY 502-491-4000

Paducah, KY 270-444-8390

Evansville, IN 812-425-4491

Indianapolis, IN 317-872-8410

Zeeland, MI 616-748-4108

Corbin, KY 606-528-3700

Ft.Wayne, IN 260-489-4551

New Hudson, MI 248-356-5200

Lansing, MI 517-272-5033

Lexington, KY 859-259-3456

Romulus, MI 734-641-8238

Wixom, MI (Cons. Division) 248-356-5200

Stanville, KY 606-478-9201

Saginaw, MI 989-752-9400

Byron Center, MI 616-878-7450

HOWELL TRACTOR & EQUIPMENT LLC www.howell tractor.com Gary,IN 800-852-8816 Peru, IL 800-342-6072

GIBSON MACHINERY LLC

MURPHY TRACTOR & EQUIPMENT CO.

www.gibson machinery.com

murphytractor.com

Cleveland, OH 440-439-4000

Cincinnati, OH 800-844-3734

Pittsburgh, PA 724-695-5000

Vandalia, OH 800-233-4228

ROLAND MACHINERY CO. www.rolandmachinery.com

THE VICTOR L. PHILLIPS CO.

Carterville, IL 618/985-3399

Franksville, WI 262-835-2710

Bridgeton, MO 314-291-1330

DePere, WI 920-532-0165

Columbia, MO 573-814-0083

DeForest, WI 608-842-4151

Cape Girardeau, MO 573-334-5252

Eau Claire, WI 715-874-5400

Brookline Station, MO 800-955-2729

Schofield, WI 715-355-9898

Wichita, KS 800-878-3346

Escanaba, MI 906-786-6920

Topeka, KS 800-878-4345

Palmyra, MO 573-769-2056

www.vlpco.com Kansas City, MO 800-878-9290 Joplin, MO 800-878-8223

Garden City, KS 800-511-1435

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com Savage, MN 800-888-9515

Milan, IL 800-633-9114

Des Moines, IA 800-555-1445

Duluth, MN 800-888-9535

Cedar Rapids, IA 800-616-6615

Virginia, MN 800-752-4304

Sioux City, IA 800-633-9104

TITAN MACHINERY www.titanmachinery.com Bismark, ND 800-247-1282

Rapid City, SD 888-388-0266

Dickinson, ND 888-418-2873

Sioux Falls, SD 800-262-5373

Fargo, ND 800-342-4330

Williston, ND 877-570-4635

Omaha, NE 866-733-1100

Lincoln, NE 866-801-6261

Minot, ND 701-852-3188

Page 92 â&#x20AC;˘ October 11, 2014 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ Recycling Section â&#x20AC;˘ Construction Equipment Guide

Meet any screening challenge.

LokotrackÂŽ mobile screens Whatever your application, there is a LokotrackÂŽ ST Series mobile screen that can handle it. Metso offers the widest selection of high capacity, dependable screens to meet any challenge, from aggregates processing to demolition and recycling. t &YDFMMFOU TDSFFOJOH DBQBDJUZ t *OUFMMJHFOU QSPDFTT DPOUSPM GPS TBGF BOE easy operation t &BTZ UP NPWF RVJDL TFU VQ t 'MFYJCJMJUZ XJUI B XJEF WBSJFUZ PG TDSFFO NFEJB t &DPOPNJDBM GVFM FGGJDJFOU QSPEVDUJWJUZ t 'VMM DPNQBUJCJMJUZ XJUI -PLPUSBDL -5 DSVTIFST

Lokotrack ST2.8 mobile scalping screen

Contact your local Metso distributor today. www.metso.com/lokotrack

Lokotrack ST3.5

Lokotrack ST2.4

1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508 7910 Highway 2 W Devils Lake, ND 58301 701-665-3800 4950 E Highway 12 Aberdeen, SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

Lokotrack ST4.8

CENTRAL SERVICE & SUPPLY, INC. www.centralsands.com 4219 E. 50th St. Des Moines, IA 50317 800-247-2400 515-964-8600 Fax: 515-309-0667

AIS CONSTRUCTION EQUIPMENT CORP. www.aisequip.com 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Fax: 517-321-6275 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax:â&#x20AC;&#x2C6;616-538-0449 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311

Saginaw 4600 AISâ&#x20AC;&#x2C6;Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 West Detroit, MI 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 11, 2014 • Page 93

Illinois

Indiana

Michigan

Minnesota

Ohio

Midwest Crushing & Screening

Powerscreen Indiana, Inc.

Powerscreen of Michigan

Theco, Inc.

AGGCORP

7144 N Harlem Ave. Chicago, IL 60631 midwestcrushandscreen@gmail.com 847.271.5027

255 N Hetzler Court Angola, IN 46703 www.powerscreenindiana.com 313.841.8370

36639 Groesbeck Hwy. Clinton Township, MI 48035 www.powerscreenofmichigan.com 586.229.2882

5470 Quam Ave. NE St. Michael, MN 55376 www.thecoinc.com 800.776.0335

22800 Lakeland Blvd. Cleveland, OH 44132 www.aggcorp.net 614.309.6854

Page 94 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLASSIFIEDS Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 AIR COMPRESSORS

EXCAVATORS

Compressors

Hydraulic Excavators

Airman PDS185, CFM Compressor, Quiet, Efficient, Durable, good condition, 1950 hours ................................$10,500. 480-695-0672

ASPHALT EQUIPMENT Asphalt Cutters Attachments International ASPHALT CUTTERS SEVERE SERVICE HIGH SPEED ASPHALT CUTTER Skid Steers, TLB, Loaders, Excavators 14 Models Available ''24-48 hour shipping'' SPECIAL PRICING! Call 218-863-6444 www.attachmentsintl.com www.attachmentsusa.com

Asphalt - Misc. 2007 Dynapac PL2000, 80 in., front loading planer, good condition, 3,000 hrs. ......................$139,500. 847-437-8686

COMPACTION EQUIPMENT Vibratory Compactors 2006 Vibromax/JCB VM75, Single drum, 84 HP, 16,094 operating wgt., 68.9 drum width, 31,024 lb. force, pictures available, good condition, 890 hours ........................$36,000.

2008 JCB JZ140, zero tail swing excavator, includes bucket, good condition, 2,500 hours......$73,500. 2007 JCB JS260, 60,000 lb. excavator includes bucket and quick coupler, good condition, 1,375 hours ..............................$139,900. 2005 JCB JS220, 50,000 lb. excavator includes bucket, quick coupler and thumb, good condition, 2,600 hrs ....................................$88,900. 847-437-8686 2007 Doosan DX420, S/N 5119, Excavator with shear hydraulics, Good condition, 5,943 hours.......... ......................................$120,000. 440-439-4000

Mini Excavators 2006 JCB 8080, 18,000 lb. mini excavator w/ dozer blade, includes bucket, good condition, 2,300 hours ........................................$43,900. 847-437-8686

FORESTRY EQUIPMENT

2008 Yanmar CBL40, PTO, 3pt. hitch, backhoe, loader bucket attached w/ skid plate, great condition, 216 hours.....................CALL. 641-628-2000 2009 New Holland B95B, 4WD, Tier 3 diesel, extend-a-hoe, 1.3 bucket, A/C, flip over stabilizers, cold start package, very good condition, 814 hours ................$67,500. 815-941-1900 2008 JCB 3CX-15, 15 ft. backhoe w/ extendable dipper, backhoe bucket included, very good condition, 1,700 hours ..............$55,000. 847-437-8686 2008 Yanmar CBL40, PTO, 3 pt. hitch, backhoe, loader bucket attached with skid plates, great condition, 216 hrs ......................CALL. 641-628-2000

Skid Steer Loaders 2009 Takeuchi TL250, Cab/Heat/Air, Hydraulic QC, Clean, 80'' Tooth Bucket w/ New Teeth, Brand New Tracks! 2000 hours...... ........................................$48,000. 217-671-5296 2012 JCB 260, Cab, heat, 2-speed, foot throttle, general purpose bucket, very good condition, 200 hours ........................................$33,000. 847-437-8686

Chippers

Wheel Loaders

2010 Carlton 2012, High Horsepower 12'', Very good condition, 753.2 hrs ..................$27,500.

2008 JCB 426ZX, Cab w/ A/C, diesel, 2.7 yd. bucket, 3rd valve Joystick control, heated mirrors, very good condition, 3,033 hours .. ........................................$62,500.

845-247-0206

FORKLIFTS Rough Terrain Forklifts

815-941-1900 2008 JCB 426HT, 2.5 yd. wheel loader, 2.5 yd. bucket, good condition, 1,000 hours ............$115,000. 847-437-8686

Farm-Rite Equipment 908-625-0697

JCB 930-4, Canopy, 4WD, 6000 lbs. lift, 22 ft. clear view mast w/ 66'' carriage & 48'' forks. Has warranty. 250 hrs, pictures available $56,000.

Compaction - Misc.

908-625-0697

2007 JCB Vibromax VM115D, 80'', 25,000 lb. w/ pad foot & dozer blade, very good condition, 350 hours ................................$77,900.

GENERATORS & GEN SETS

1999 Liebherr A932HD, S/N 5316, Material-Scrap Handler, Good condition, 17,968 hrs............$125,000.

Generators & Gen Sets

440-439-4000

2007 Dynapac CA134, 54'', 12,200 lb. single drum roller, excellent condition, 300 hours ..............$43,500.

MMD AMSDG-25S, 20KW Generator, Towable 3 phase Diesel 25KW, good condition, 4,000 hours ..........................................$9,750.

847-437-8686

CRANES Boom Cranes

480-695-0672

LOADERS

MATERIAL HANDLERS Material Handlers

TRAILERS Dump Trailers Felling 6x12 Dump Trailer, 6000 lb. capacity, 5hp Honda engine, good condition....................$6,500. 480-695-0672

Backhoe Loaders

Trailers - Misc.

2011 National NBT45, 45 ton max capacity, 142' of hydr. stick, 2 man steel platform & test weights, good condition ........................$369,900.

2006 Allmand TLB 6235, 4WD, 33 HP, good condition, 1220 hours .... ........................................$19,995.

Wylie Express 500 Water Trailer, 500 gallon, 4hp Honda engine, tandem surge brakes, good condition ..........................................$5,700.

952-656-7107

480-695-0672

BusinessCalendar

To view our Business Calendar online, go to www.constructionequipmentguide.com.

Ohio Aggregates & Industrial Minerals Association (OAIMA) Storm Water Inspection Training Event Date: October 15, 2014 Time: 11 AM to 2 PM Civil & Environmental Consultants (CEC) Scioto Country Club, Columbus, OH Speakers include CEC Training/overview of the inspection process by Harry Kalipolits of the Ohio EPA. For more information, call toll free: 1-888-598-6808.

Ready or not, health care reform is kicking into full gear for employers in 2015. Now is the time to make sure your company is ready to report. Join us for a “walk” through the new forms, with lots of opportunities to ask questions. Everyone in your firm who has responsibility for insurance or employee benefits should attend this seminar. Presenter: Monica Kelley, Esq., Gray Plant Mooty Seminar: 7:30 AM to 9:30 AM Registration Fee: $25 per person (includes breakfast) Register: Online at www.agcmn.org Questions??? Contact Denise Woods, 651/7962186 or dwoods@agcmn.org TRIMBLE DIMENSIONS 2014 IS THE PLACE TO BE IN NOVEMBER. REGISTER NOW! NOVEMBER 3 thru 5, 2014 LAS VEGAS, NEVADA Trimble Dimensions User Conference 2014 is the must attend conference for industry professionals such as yourself. Haven’t attended in the past? Well, here’s what you’ve been missing! . Over 400 sessions lead by industry experts . Pavilion with the latest technology showcased . Unlimited networking opportunities . Peer-to-peer collaboration . Professional Development House (PDH) . Hands-on training . Special events – plus more! Dimensions 2014 is the place to be in November. Discover first-hand how you can transform the way you work by integrating advanced positioning technology, field and office applications and real time communications. For more information, contact: www.TrimbleDimensions.com or Email: Trimble_Dimensions@Trimble.com.

SAVE THE DATES!!! CRC CANADA – The 4th Annual CRC Canada Returns to Edmonton this Fall DATES: OCTOBER 20-21, 2014 The Crane & Rigging Conference (CRC) Canada will return to the Marriott at River Cree Resort, Edmonton, Alberta on October 20-21, 2014. Now in its fourth year, the event will stay at the location of the 2013 conference which received rave reviews from attendees. CRC Canada 2014 will be supported by Industrial Training International (ITI) Canada ULC, Event Partner; Liebherr-Canada Ltd., Associate Sponsor; and Crane & Hoist Canada, Media Partner. Additionally, organizer Maximum Capacity media has confirmed that the Canadian Hoisting & Rigging Safety Council (CHRSC) will again participate as a Supporting Organization. REGISTER NOW!!! For more information on this event, you may contact CRC Canada direct at 888/608-0330. AGC OF MINNESOTA CONSTRUCTION FINANCIAL MANAGEMENT CONFERENCE AGC OF MINNESOTA NOVEMBER 5 THROUGH 7, 2014 IN LAS VEGAS, NEVADA Employment & Labor Law Conference for Manufacturers The AGC/CFMA Construction Financial Management Conference Join us for a fast-paced ½ day conference on current employ- will be held on November 5 – 7, 2014 in Las Vegas, Nevada. ment and labor law issues that affect manufacturers. All topics Get the latest information on: Construction Market Trends; of this conference will address both MN & WI laws. Financial Accounting Standards Board; Surety, Financial, and Event Details: Credit Markets, Change Order and Claims Management; DATE: WEDNESDAY, OCTOBER 22, 2014 Federal acquisition regulations; construction taxes; strategies TIME: 12:00 NOON to 5:30 PM LOCATION: Radisson Hotel Duluth; 505 W. Superior Street, for economic conditions; business real estate management; ethics and fraud. Register before September 5th: $780/After Duluth, MN September 5th: $860. Conference Details are available at LUNCH: Buffet Lunch SOCIAL HOUR: Appetizers and Two Hosted Drinks Per Person http://meetings.agc.org/agc _cfma. COST: $20 Per Person For Questions or Special Needs: Ohio Aggregates & Industrial Minerals Association (OAIMA) Please Contact: Steph Davis at stephd@runestone.net or call OAIMA 2014 Annual Meeting & Trade Show 877/330-2632 Hilton Columbus Hotel, Easton Town Center, Columbus, Ohio Dates: November 13-14, 2014 Mark Your Calendar for GIE+EXPO 2014 Hotel Information: Hilton Columbus Easton OCTOBER 22 to OCTOBER 24, 2014 3900 Chagrin Drive WEDNESDAY, OCT 22 – FRIDAY OCTOBER 24 Columbus, Ohio 43219 Green Industry Conference and School of Grounds Telephone: 614/414-5000 Management WEDNESDAY, OCT 22 Dealer Day; Reception on the Tradeshow Floor and Free AGC of MINNESOTA SAVE THE DATES!!! Concert at 4th Street Live! . December 4th – Presidents/Holiday Reception, Minnesota THURSDAY, OCT 23 GIE+EXPO open to all industry participants, plus Free Concert History Center, St. Paul . December 11th – AGC/MnDOT Grading and Base at 4th Street Live! Technology Forum FRIDAY, OCT 24 Indoor – 9 AM to 5 PM and Outdoor – 9 AM to 4 PM, plus Free The Minneapolis Boulevard Hotel, Brooklyn Center Concert at 4th Street Live! . January 15th – 95th Annual meeting, Minneapolis Marriott Excellent timing for manufacturers to show their complete new Southwest, Minnetonka lines…750 Exhibits throughout 500,000 sq. ft. inside the DETAILS of each will be available over the coming weeks! Kentucky Exposition Center and in the turf area outside…19 acres of outdoor demonstrations and test driving, adjacent to CRC/ICHC 2014 the indoor exhibits…seminars to boost your efficiency and bot- Crane & Rigging Conference / Industrial Crane & Hoist tom line…convenient mid-America location within driving disConference tance of 60% of America’s population…Networking opportuniDATES: December 3 – 4, 2014 ties. LOCATION: Hilton Houston Nasa Clear Lake Hotel, For more information, email: info@gie-expo.com. Houston, TX The event will be held adjacent to the Space Center Houston AGC OF MINNESOTA and NASA’s Johnson Space Center. CRC/ICHC (Crane and MN CONSTRUCTION CREW – 2nd ANNUAL INFO EXPO DATE & TIME: Tuesday, October 28th at 9:00 AM to 12:00 PM Rigging Conference/Industrial Crane and Hoist Conference) is an independent conference which offers education and netLOCATION: Carpenters Union Hall 710 Olive Street, Saint Paul, MN working opportunities for safety and risk managers, crane and Website: www.northcoutnrycarptenter.org rigging supervisors, lift directors, project managers, and others PURPOSE: To provide access and information about training responsible for managing crane and rigging operations in conopportunities and upcoming projects in the construction indus- struction and heavy industry. More than just a lecture-style try. This event will focus on how people can get trained for spe- conference, CRC/ICHC offers attendees opportunities for netcific skills and trades even if it is preparing within their current working in small groups, experiencing hands-on learning, and trade. Contractors will also be available to discuss with atten- the chance to visit vendors during exhibit hours. dees information about large projects that will be starting in the Who Attends? Typical attendees include contractors, engineernext 1-2 years. If you have any questions or need additional information, ing firms, various construction user groups, unions, and crane and rigging professionals. The conference sessions are geared please email: John.Ophelan@co.ramsey.mn.us. Thank you for your continual support in this outreach initiative!!! for safety and risk managers, crane and rigging supervisors, fleet managers, and small business owners. To submit a speaker proposal, go to AGC OF MINNESOTA Health Care Reform Seminar: A Refresher Course and a https://maxcapmedia.wufoo.eu/forms/crcichc-2014call-forPrimer on New Reporting Requirements – OCTOBER 30, 2014 speakers/. For more information on exhibiting, contact Mark Bridger, mbridger@maxcapmedia.com. at the Radisson Hotel, Roseville, MN

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 95

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95, Color Ad $145

Badger 4450B, 55 Ton Capacity, Diesel Engine, 4 Section Boom, 2 Jibs, 2 Winches, Block & Hook, 29.5-25 Tires 20-21 AP Andy Mueller • 414-881-5257

2013 Takeuchi TB016, 300 Hrs, OROPS, Hyd Thumb, Coupler, Rubber, 7’9” Dig Depth, 3500# Capacity.....$28,950 Call Steve Samosky • 262/373-2151 21 JM

“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 3500 models of construction equip. PNEUMATIC AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states .............................................................Call

Summit Supply LLC 888-888-1248 • sales@summittracks.us 21-22 TM

2006 Gehl 7810 Turbo, 115HP, 2260 Hrs, 3675 Lb Lift, 84” Bkt, 2 Speed..................................$30,900 Call Scharber & Sons 763-428-410720-21 PK

New Compact Excavators ....Starting at $41,000 Call Dan 612-306-4496 20-21 PK

2005 Takeuchi TL140, 2970 Hrs, Cab, 81 HP, 76” Bkt, 18” Rubber Tracks ...........................................................$24,250 Call Steve Samosky • 262/373-2151 21 JM

2004 Cat 320LC, 9350 Hrs, Hyd Cplr, Hyd Kit, 54” Bkt, 9’8” Stick, 33’ Reach, 48,000# .........................................$66,750 Call Steve Samosky • 262/373-2151 21 JM

1998 New Holland LX885, 1800 Hrs, 72” Tooth Bkt, 2200# Capactiy, 60 hp, 2 Speed, New Engine......................$11,400 Call Steve Samosky • 262/373-2151 21 JM

1999 Freightliner FL70, Cummins 215, Turbo, 6 Speed, Contractor Box with Hoist, 70K Miles, Power Steering, A/C, Under Box Mounted Aluminum Water Tank.$15,000 20-21 AP 952-445-6727

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. Call McLaren 888-492-4230 20-21 DH

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. 20-21 DH Call McLaren 888-492-4230

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 20-21 DH Call McLaren 888-492-4230

2012 Wacker 28Z3, 75 Hrs, OROPS, Coupler, Aux. Hyd, Rubber, 9’ Dig Depth, 5680 Lbs................................$32,710 Call Steve Samosky • 262/373-2151 21 JM

2008 70 Ton Liddell Drop Side Deck Lowboy Tri-Axle Trailer, Tandem Two-Axle Jeep, Two-axle Nitro Stinger with Motor ......................................................................$210,000 Sun Piledriving Equipment 302-539-7187 21-22 BB

Used 2010 S630 Bobcat Skid Loader, 74.3HP TurboDiesel, 549 Hrs, Tires Like New, 2-Speed, High-Flow, Cab w/Heat/AC, Switchable Controls, Stereo, Power Bob-Tach, Deluxe Instrumentation ...............................................$33,800 Top Notch Equipment 763-398-0079 21-22 PK

2012 Wacker WL50, 300 Hrs, Cab, A/C, Hyd Cplr, 75” .98 Cy Bkt, 10,660 Lbs, Articulated.................................$60,420 Call Steve Samosky • 262/373-2151 21 JM

2006 Ditch Witch FX60 Vacuum Excavator, 800 gal spoils capacity, 200 gal water tank, 4 cylinder Cummins engine, 3251 hours ..............................................$32,500 21-22 EB Call Tania 614-443-9751 x237

2004 Cedarapids 452, Front Wheel Assist Topcon Electric 20’ Screed, 5546 Hrs..........................$87,500 Call 605-336-0411 21-22 PK

2003 Ditch Witch 255SX Vibratory Plow, 12” Feed Blade w/3 Boring Rods, 550 Hrs, Exc. Condition.......................Call 21 JM Call Tim at 630-665-5600

2007 Ditch Witch XT1600, 221 Hrs, Tracks at 90%, Excellent Condition ................................$49,500 Call Tim 630-665-5600 21 JM

Page 96 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

2010 Gehl V270 Vertical Lift Skid Loader, Like New, One Owner, 785 Hrs, OROPS, ISO Joystick Controls, 74” 22.8 Cu. Ft. HD Bkt, Custom Radiator Guard, Super Nice Machine! .......................................$29,900 21 JM Call George 219-696-8911

2013 Case SR250, s/n JAFSR250JCM443037, 310 Hrs, Cab w/Heat, Two Speed, Hyd Coupler, 78” Bkt, 14 x 17.5 Tires ..............................$43,500 21 JM Call Steve 630-878-8765

2005 Takeuchi TL150, s/n 21502487, 2450 Hrs, Cab w/Heat & AC, Case Controls, 80” Tooth Bkt ..... ....................................................................$34,000 Call Steve 630-878-8765 21 JM

2012 Case SV185, s/n JAFSV185PBM429437, 325 Hrs, Cab w/Heat, Two Speed, Manual Coupler, 72” Bkt, 12 x 16.5 Tires ..............................$32,000 21 JM Call Mark 630-739-7770

1991 John Deere 300D, S/N 775834, Open ROPS ....................................................................$19,000 Call 502/456-4050 Ask for Lynell or Albert 21-22 EB

1981 Grove Rt 755, 55 Ton S/N # 49225, Cummins Rebuilt, 110’ Main Boom, 32’ Jib, Auxilliary Hoist, 5 Sheave Block, Cleveland Ohio 21-22 EB Call Andy 216-316-1511

1997 Volvo A30C, s/n A30CV2688, 11,070 Hrs, 4 Spray Heads, Hose Reel w/Nozzle, Hyd. Driven Water Pump, Volvo TD103KBE Engine, 289 Adv. Horsepower, 1-2-3-D Speed, in Cab Controls, A/C . ....................................................................$75,000 21 JM Call David 219-696-5680

1993 Grove Rt 422, 22 Ton S/N # 78334, Cummins 4 Cyl 12,100 Hours, 3 Speed Transmission, 27’-70’ Main Boom, 25’-43’ Jib, Auxilliary Hoist,17.5 X 25 Tires, Ball, New Rotec, Boom Scope Cylinder Rebuilt, Fresh Grove Paint, Cleveland Ohio Call Andy 216-316-1511 21-22 EB

SEE YOUR BARGAIN AD IN COLOR ONLY $50 EXTRA FOR TWO INSERTIONS 2011 Cat 980K, 4200 Hrs, Scale, EROPS w/A/C and Heat ........................................................$POR Courts Machinery • 507/678-2752 20-21 PK

STATEMENT OF OWNERSHIP, MANAGEMENT AND CIRCULATION Required by 19 USC 3685

Title of publication: CONSTRUCTION EQUIPMENT GUIDE MIDWEST EDITION; Publication Number: 1081-7034; Date of filing: Sept. 19, 2014; Frequency: Bi-weekly, 26 issues annually; Annual Subscription price: $65.00; Complete mailing address of known office of publication: 470 Maryland Dr., Ft. Washington, PA 19034; Publisher’s general business office: 470 Maryland Dr., Ft. Washington, PA 19034; Publisher’s name and address: Joseph McKeon, 5875 N. Lincoln Ave. Suite 227, Chicago, IL 60659; Editor in Chief: Craig Mongeau, 470 Maryland Dr., Ft. Washington, PA 19034; Owner: CONSTRUCTION EQUIPMENT GUIDE MIDWEST EDITION, 5875 N. Lincoln Ave. Suite 227, Chicago, IL 60659; Joseph McKeon, 5875 N. Lincoln Ave. Suite 227, Chicago, IL 60659; Edwin M. McKeon Jr., 470 Maryland Dr., Ft. Washington, PA 19034; Richard McKeon, 6060 Piedmont Row Dr South Ste 555, Charlotte N.C. 28210; Known bondholders, mortgages, and other security holders: None, Issue date for circulation data below 09/27/14; Extent of circulation (Average number of copies during preceding 12 months): Net press run 20,921; paid circulation through agents 0; through mail subscription 20,671; free distribution 0; total distribution 20,671; copies not distributed 250; return from news agents 0; Total 20,921; Percent Paid and/or Requested Circulation 100%; Actual number of copies for issue published nearest to filing date: Net press run 23,358; paid circulation through agents, 0; through mail subscription, 23,137; free distribution, 0; total distribution, 23,137; copies not distributed, 221; return from news agents, 0; Total 23,358; Percent Paid and/or Requested Circulation 100%. I certify that the above statements made by me are correct and complete. /s/ Edwin M. McKeon, Jr., President/CEO

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $95 per ad, $50 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at

800/523-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 97

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted I NEED TO BUYCUMMINS KT19 GENSET. CONTACT: IKRAM KHAN PHONE: +92-333-555-5360 EMAIL: IUKANDCO@GMAIL.COM –––––––––––––––––––––––––––––––– LOOKING FOR WELDING TRUCK CONTACT: JOSE PHONE: 347 3516853 EMAIL: JOSELGUARNEROS3@GMAIL.COM –––––––––––––––––––––––––––––––– USED KUBOTA92SV SKID STEER IN GOOD SHAPE CONTACT: GLENN, SIEVE CONSTRUCTION PHONE: 507-227-3780 FAX: 507-736-2199 EMAIL:WWW.GSIEVE@FRONTIERNET.NET –––––––––––––––––––––––––––––––– LOOKING TO BUY USED CATERPILLAR WHEEL LOADERS 920, 926, 930, 936, 938F/G, 950B/C/E/F, 966C/D/E/F/H, 980C/F AND 988B. IF YOU HAVE ANY, PLEASE OFFER ME WITH PICTURES, SERIAL NUMBER, CONDITION, LOCATION AND FINAL OFFER PRICE. CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL:INFO@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– LOOKING TO BUY CATERPILLAR WHEEL LOADER 930 BETWEEN 1980 TO 1984 CONTACT: MOHAMED PHONE: 253-232-6772 EMAIL: MERCY1100@HOTMAIL.COM –––––––––––––––––––––––––––––––– WE BUY EQUIPMENT MANUALS | WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS, BUT NOT INCLUDED TRUCKS AND VEHICLES. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL US. CONTACT: GRACE FRANCES PHONE: 2708492270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– PILE HAMMERS | LOOKING TO BUY CLAMSHELL BUCKETS, GRAPPLES, PILE HAMMERS, WINCHES, HOISTS, CRANES & HOOK BLOCKS. CONTACT: GREG PHONE: 724-228-5560 EMAIL: NEEQUIPDIST@AOL.COM –––––––––––––––––––––––––––––––– TERRAMITE T5C USED 1990 THRU 2000, PLEASE CONTACT E MAIL ONLY CONTACT: C,B,BARKER PHONE: 910 564 4931 FAX: NONE EMAIL: EDINA@INTRSTAR.NET ––––––––––––––––––––––––––––––––

PILE HAMMERS | LOOKING FOR USED VIBRATORY AND DIESEL HAMMERS APE _ ICE _ J&M CONTACT: WILLIE EMAIL: WILLIE@PILEMAN.COM –––––––––––––––––––––––––––––––– IT DD70, IR DD25, AND DEERE 410 2004 AND UP | IR DD70, IR DD25, AND DEERE 410 2004 AND UP BOBCAT S185 2010 BOBCAT 325 BOBCAT 323 KOMATSU DOZERS PLEASE EMAIL ME ALL INFO CONTACT: MANSOOR MOLAI PHONE: +16303799175 EMAIL:MANSOOR.MOLAI@GMAIL.COM –––––––––––––––––––––––––––––––– WE WANT TO BUY CATERPILLAR DOZERS D9N & D9R WITH RIPPERS.PLEASE OFFER US & KINDLY SEND US DETAILS, PICTURES & OFFER GOOD PRICE. CONTACT: FAIZ KHAN PHONE: +92-333-3298751 EMAIL:NAQIB_KHANINTRCO@HOTMAIL.COM –––––––––––––––––––––––––––––––– WE WANT TO BUY CATERPILLAR WHEEL LOADERS 950B, 950E, 966E, 966F.PLEASE OFFER US & KINDLY SEND ME DETAILS, PICTURES & OFFER GOOD PRICE. CONTACT: NAQIB KHAN PHONE: +92-333-3298751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– DROP DECK TRAILER | 53X102 DROP DECK AIR RIDE TRAILER CONTACT: JOHN MICHALKO PHONE: 262 889 1372 EMAIL: TRUCKERJOHN54@YAHOO.COM –––––––––––––––––––––––––––––––– TRACTOR CAB | ENCLOSED USED CAB TO FIT IHC 684. CONTACT: RON PHONE: 419-565-5429 EMAIL: MH101SUPER@YAHOO.COM –––––––––––––––––––––––––––––––– VANAIR 80 VIPER | PORTABLE AIR 80 CFM CONTACT: ANDY PHONE: 2316725139 EMAIL: ANDY.BOS42@GMAIL.COM –––––––––––––––––––––––––––––––– COMMERCIAL LAWN MOWER 52 IN | COMMERCIAL LAWN MOWER WITH UNDER 200 HOURS AND A 52 IN SIZE DECK NEEDS TO BE A 2012 OR 2013 CONTACT: A732PATCAN@AOL.COM PHONE: 6315862225 EMAIL: A732PATCAN@AOL.COM –––––––––––––––––––––––––––––––– TRACHOE EMAIL: TODDDEB@ARVIG.NET –––––––––––––––––––––––––––––––– INTERNATIONAL TRI AXLE DUMP PAYSTAR 5000 5600 OR 5900 FROM CONTRACTOR 400 HP OR MORE | TRI AXLE DUMP CLEAN 400 HP OR MORE FROM CONTRACTOR. CONTACT: KEVIN PHONE: 856-692-0027 EMAIL: KEVIN@SANSALONEEXCAVATING.COM ––––––––––––––––––––––––––––––––

WE WANT TO BUY CAT WHEEL LOADER 920, 926E, 936E, 950B, 950E, 966D, 966E, 966F, 970F, 980C, 980F, 988B AND 988F IF YOU HAVE ANY FOR SALE PLEASE EMAIL US PHOTOS AND DETAILS LOOKING FORWARD FOR YOUR OFFERS. CONTACT: RIZ SUNESARA PHONE: 832-528-0786 FAX: 281-727-0415 EMAIL:RIZ@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– WE ARE LOOKING TO BUY CAT MOTOR GRADER 12G, 140G, 14G, AND 140H IF YOU HAVE ANY FOR SALE PLEASE EMAIL PHOTOS AND DETAILS. CONTACT: STEVE PHONE: 713-659-0593 FAX: 281-727-0415 EMAIL: STEVE@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– FIELD STRIPING MACHINE | LOOKING FOR A AIRLESS FIELD STRIPING MACHINE CONTACT: RICK PHONE: 518 369 3296 FAX: 518 371 0296 EMAIL: EAC046@NYCAP.RR.COM –––––––––––––––––––––––––––––––– HYUNDAI 4503 | LINDI FINAL DRIVE CONTACT: WILLIAM RENAUD JR PHONE: 207-384-5111 FAX: 207-384-4809 EMAIL:WMRENAUD@COMCAST.NET –––––––––––––––––––––––––––––––– WANT TO BUY NICE CRAWLER LOADER. LIVE IN WEST POINT GEORGIA 706 645 6704 OR CELL 7065019457 CONTACT: CHARLES TRAMMELL PHONE: 7065019457 EMAIL:CCHARLES_JANICETRAMMELL800@YAHOO.COM –––––––––––––––––––––––––––––––– MINI EXCAVATOR 1200018000# | I NEED TO PURCHASE A MINI EXCAVATOR FOR MY GROWING BUSINESS. CONTACT: ADAM PHONE: 518-496-5020 EMAIL: SIPENSONS@GMAIL.COM ––––––––––––––––––––––––––––––––

CAT WHEEL LOADERS | WANTED TO BUY CAT WHEEL LOADER 936E, 950B, 950E, 966D, 966F, 970F, 988B, AND 988F IN RUNNING OR NON RUNNING CONDITION IF YOU HAVE FOR SALE PLEASE EMAIL ME PHOTOS AND DETAILS. CONTACT: STEVE PHONE: 713-659-0593 FAX: 281-727-0415 EMAIL:STEVE@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– CASE BACKHOE LOADER 580SK, 580L, 580M AND 580SM | I AM LOOKING TO BUY CASE BACKHOE 580SK, 580SL, 580L, 580SL, 580M AND 580SM IN ANY CONDITION IF YOU HAVE FOR SALE PLEASE CONTACT ME VIA PHONE OR EMAIL. CONTACT: RIZ SUNESARA PHONE: 832-528-0786 FAX: 281-727-0415 EMAIL:RIZ@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– CONTACT: AIMN BLBOL PAVER | LOOKING FOR BLAW-KNOX PF PHONE: +971504814823 5510 OR PF3200, THE CLOSER TO FAX: +97165355291 EMAIL:INFO@ALWAFAEQUIPMENT.COM WASHINGTON STATE, THE BETTER. THANKS! –––––––––––––––––––––––––––––––– CONTACT: SANTIAGO SCARZELLA AMCO VEBA 105 3S 5TON | NEW OR PHONE: 3055064263 LIKE NEW CONDITION. TO BE MOUNTEMAIL: SSCARZELLA@GMAIL.COM ED ON A WORKBOAT. –––––––––––––––––––––––––––––––– CONTACT: ROGER APPLEWHITE TELESCOPIC FORKLIFT | 4-6 TON TELPHONE: 228-217-4135 ESCOPIC FORKLIFT DIESEL 12-14M EMAIL: RAPPLE34@CABLEONE.NET 1999-2002 GOOD CONDITION –––––––––––––––––––––––––––––––– CONTACT: WILFRED OBENGSACKEY LOADER FOR MASSEY 390 4WD | SEC- PHONE: 233264495065 OND HAND LOADER TO FIT MASSEY EMAIL:SACKSONLOGISTICS@GMAIL.COM 390 4WD –––––––––––––––––––––––––––––––– CONTACT: RICHARD FITZGERALD TERRAMITE BACKHOE, USED | TERPHONE: 00353860437770 RAMITE BACKHOE USED 4X4 DIESEL EMAIL:RICHARDFITZGERALD3@HOTOR GAS. 2003-4-6 MAIL.COM CONTACT: ALAN –––––––––––––––––––––––––––––––– PHONE: 903-681-2064 CAT D6R AND D7R 9903 | WE ARE EMAIL: COLEYOUNGER76@GMAIL.COM LOOKING FOR D6R AND D7R 1999-2002. –––––––––––––––––––––––––––––––– RUNNING CONDITION WITH PICTURES. DIESEL TANK FOR TOWABLE INGERSOLL RAND AIR COMPRESSOR | THIS THANKS. IS AN OLD, DETROIT MADE PORTABLE CONTACT: MICHAEL INDUSTRIAL AIR COMPRESSOR THAT EMAIL: AMEARTH@HOTMAIL.COM YOU TOW TO WORK SITE. NEED –––––––––––––––––––––––––––––––– REPLACEMENT DIESEL GAS TANK AND DYNAPAC CA12 AXLE | NEED REAR COMPANY DOES NOT STOCK PARTS AXLE FOR DYNAPAC CA12. WOULD OLDER CAT 320 OR CAT 215, CAT 225 | PURCHASE ENTIRE NON-RUNNING THIS OLD. SEEKING AN OLDER MODEL CAT 320 IN MACHINE. CONTACT: RJ THE MID 1990 RANGE OR CAT 215/CAT CONTACT: NEIL PHONE: 801-597-7314 225 OLD BUT IN OPERATING CONDIEMAIL: RSSMTCH@GMAIL.COM PHONE: 320-763-4491 TION. ONLY SEEKING ONE UNIT. CON–––––––––––––––––––––––––––––––– EMAIL: NEIL@AMERIGEN.NET TACT ME VIA EMAIL ONLY WITH PHO4400 GPM POSITIVE DISPLACEMENT –––––––––––––––––––––––––––––––– TOGRAPHS AND CONDITION INFORMA- D9R | WE LOOKING FOR BULLDOZER PUMP | SECOND HAND POSITIVE DISTION. PLACEMENT PUMP CAPACITY: 3300 D9R AND D9N MANUAL FROM 1988 UP CONTACT: JEFF LAWSON 4400 GPM CAPACITY: 750 - 1000 M3/HR TO 1997 WITH RIPPER SINGLE SHANK EMAIL: JLAWSON29321@CHARTER.NET PRESSURE: 16 - 20 BAR PRESSURE: CONTACT: OUFI –––––––––––––––––––––––––––––––– 230 - 290 PSI TEMPERATURE: 60 C PHONE: 966530185141 USED TIGER MOWER | DESCRIBE TEMPERATURE: 140 F VISCOSITY OF FAX: 9660127512024 WHAT YOU WANT. MEDIUM: 2115 CP MEDIUM: CRUDE OIL EMAIL:ALOUFI01@HOTMAIL.COM CONTACT: CONTACT NAME LOCATION OF PLANT: MALAYSIA –––––––––––––––––––––––––––––––– EMAIL: MEREDITH967@VERIZON.NET CONTACT: SYAZWAN ELIAS SS RIPER FOR CAT D9N OR D9R | WE –––––––––––––––––––––––––––––––– EMAIL: SYAZE.87@GMAIL.COM WANT TO BUY SS RIPPER FOR CAT WHEEL LOADERS | I AM LOOKING TO –––––––––––––––––––––––––––––––– D9N OR D9R. THE RIPPER CAN BE BUY USED CATERPILLAR WHEEL CAT 950B, CAT 950E | I AM LOOKING USED OR REBUILT IF WELL PRICED. LOADERS 920, 926, 930, 936, 938F/G, FOR CAT WHEEL LOADERS 950E AND CONTACT: TIAGO DONATO 950B/C/E/F, 966C/D/E/F/H, 980C/F AND 950B, PLEASE FEEL FREE TO CONPHONE: (305) 909-9743 988B. IF YOU HAVE ANY, PLEASE TACT ME, IF YOU HAVE AVAILABLE OR EMAIL:EQUIPMENTSALES@JAXMAOFFER ME WITH PICTURES, SERIAL ANY UP COMING UNIT. REGARDS NUMBER, CONDITION, LOCATION AND CHINERY.COM ROYAL MACHINERY TRADERS FINAL OFFER PRICE. –––––––––––––––––––––––––––––––– CONTACT: ROYAL TRADERS USA.

EMAIL:ROYALMACHINERYTRADERS @GMAIL.COM –––––––––––––––––––––––––––––––– NATIONAL CRANE BOOM SECTIONS | LOOKING FOR TELESCOPIC BOOM SECTIONS FOR A 880 SERIES NATIONAL CRANE CONTACT: MIKE ACHTOR PHONE: 847-782-0672 FAX: 847-782-0673 EMAIL:PROCISIONBORING@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– 20 FEET TRAILER WITH 10 TIRES CONTACT: VIJAY PHONE: 9444411691 EMAIL: IE@JRMETALCHENNAI.COM –––––––––––––––––––––––––––––––– CATERPILLARS DOZER D7H AND G | WANTED GOOD USED CATERPILLARS BULLDOZER D7H AND D7G CONTACT: GABRIEL FOTSO PHONE: 2027101655 EMAIL: TOKAMGABI@YAHOO.FR –––––––––––––––––––––––––––––––– GOOD USED SCHWING BOOM TRUCKS | SCHWING W/MACK TRUCK MOUNTED CONCRETE BOOM TRUCKS 1994 & NEWER 32M TO 39METER CONTACT: WILLIAM CROSS PHONE: 407 595 8221 FAX: 407 843 0136 EMAIL:WILLIAM@CROSSPUMPING.COM –––––––––––––––––––––––––––––––– 544G MANUAL PEMBERTON QUICK COUPLER | 544G / E MANUAL QUICK COUPLER 544G 20.5 X 25 WHEELS AND TIRES, WILL TRADE FORESTRY TIRES AND WHEELS. CONTACT: MICK PHONE: 352-400-5026 EMAIL: MICK.FIELDS@FIELDCO.BIZ –––––––––––––––––––––––––––––––– BANDIT254/WOODCHUCK | PREFER DIESEL AND GOOD WORKING CONDITION CONTACT: CELIA PHONE: 1(806)665-4274 FAX: 1(806)665-4275 EMAIL:79107CELIAH@GMAIL.COM –––––––––––––––––––––––––––––––– KW DUMP TRUCK CONTACT: JOEL VANDER HEIDEN PHONE: 563-357-6273 EMAIL: JVH@FBCOM.NET –––––––––––––––––––––––––––––––– MUSTANG LOADER BUCKET | I AM LOOKING FOR A USED BUCKET WITH TEETH FOR MY 2003 MUSTANG MTL20 LOADER CONTACT: MIKE IPSAN PHONE: 703-675-3375 EMAIL: MIKEHORIZON@GMAIL.COM –––––––––––––––––––––––––––––––– INTERNATIONAL TD8C POWER SHIFT TRANSMISSION CONTACT: ROGER PHONE: 5706393058 EMAIL: ROGERPF1@FRONTIERNET.NET –––––––––––––––––––––––––––––––– TRAIL KING BELL TRAILERS CONTACT: SALVADOR PHONE: 575 317 1752 EMAIL: H.HTRUCKING@YAHOO.COM ––––––––––––––––––––––––––––––––

Page 98 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Gouverneur, NY October 9 - 11, 2014 For: 3 Days – 3 Complete Liquidations! • San Antonio, TX Thurs., October 16, 2014 For: Late Model Rental Fleet Equipment • Racine, WI Sat., October 18, 2014 For: Late Model Construction & more • Brooklyn, NY Tues., October 21, 2014 For: Industrial Equipment. Part one of 2 day sale. • Kissimmee, FL Wed., October 22, 2014 For: Late Model Rental Equipment & more • Wilkes Barre, PA Thurs., October 23, 2014 For: Industrial Equipment. Part two of 2 day sale. • Queretaro, Mexico Fri., October 24, 2014 For: Late Model CAT Equipment

• Dallas, TX Tues., December 2, 2014 For: Late & Great Rental Fleet Construction Equipment • Las Vegas, NV Sat., December 6, 2014 For: Large Rental Return Auction • Atlantic City, NJ Sat., December 13, 2014 For: Late Model Rental Returns • Albany, NY Sat., December 27, 2014 For: Rental Fleet Construction Equipment & more • Kissimmee, FL January 31 – February 8, 2015 For: 22nd Annual Construction Equipment, Trucks & more RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Hillsville, VA October 14, 2014 • Sacramento, CA October 15, 2014 • Verona, KY October 16, 2014 • Chehalis, WA October 22, 2014

• Bangor, ME Sat., October 25, 2014 For: Late Model Construction & Rental Fleet Equipment

• Orlando, FL October 23, 2014

• Parkersburg, WV Fri., October 31, 2014 For: Late Model Oilfield Equipment

• North East, MD October 28, 2014

• Columbus (Delaware), Ohio Sat., November 1, 2014 For: Late Model Construction Equipment & more • Saginaw, MI Wed., November 5, 2014 For: Land Clearing Equipment • Port Huron, MI Thurs., November 6, 2014 For: Major Job Completion • Rochester, NY Fri., November 7, 2014 For: Trucking Company Liquidation • Canastota, NY Sat., November 8, 2014 For: Late Model Construction Equipment & more • Cato (Syracuse), NY Sun., November 9, 2014 For: Buses and Light Construction Equipment • Houston, TX Tues., November 11, 2014 For: Rentals! Late Model Construction & Support Equipment & more • Gary, IN Fri., November 14, 2014 For: Complete Liquidation Concrete & General Contractor • Boston, MA Sat., November 15, 2014 For: Late Model Snow Removal & Construction Equipment • Waterloo, IA Thurs., November 20, 2014 For: Complete Liquidation Earthmoving Equipment • Manassas, VA Fri., November 21, 2014 For: Late Model Construction Equipment and more

• Wessington Springs, SD October 23, 2014

• Hobbs, NM October 30, 2014 • Pittsburgh, PA November 6, 2014 • Albuquerque, NM November 7, 2014 • Champaign, IL November 11, 2014 • Houston, TX November 12-13, 2014 • Boise, ID November 14, 2014 • New Braunfels, TX November 14, 2014 • East Brunswick, NJ November 20, 2014 • Williston, ND November 20, 2014 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Sacramento, CA Sat., October 11, 2014 For: Heavy Equipment & Utility Truck Auction • Riverside, CA Sat., October 18, 2014 For: Public Heavy Equipment Auction • Portland, OR Thurs., November 13, 2014 For: Public Heavy Equipment Auction BIG IRON www.bigiron.com 800-937-3558 • ONLINE ONLY October 15, 2014 • ONLINE ONLY October 22, 2014 • ONLINE ONLY

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com October 29, 2014 • ONLINE ONLY November 5, 2014 • ONLINE ONLY November 12, 2014 • ONLINE ONLY November 19, 2014 • ONLINE ONLY November 26, 2014 BLACKMON AUCTIONS, INC. www.blackmonauctions.com 501-352-4703 • Wilburton, OK Wed., November 5, 2014 For: Booth Environmental Auction • Van Buren, AR Tues., November 11, 2014 For: Arklahoma Pipeline Auction CAT AUCTION SERVICES www.catauctions.com 866-750-9432 • ONLINE ONLY Wed., October 15, 2014 For: eQuipment Yard • Questa, NM October 22-23, 2014 For: Complete Mining Liquidation • Pittsburgh, PA Thurs., October 30, 2014 For: Construction Equipment • Las Vegas, NV Fri., November 14, 2014 For: Construction Equipment • Oklahoma City, OK Tues., November 18, 2014 For: Construction Equipment • ONLINE ONLY Wed., November 19, 2014 For: eQuipment Yard • Warner, NH Fri., November 21, 2014 For: Construction Equipment • Denver, CO Thurs., December 4, 2014 For: Construction Equipment • Minneapolis, MN Tues., December 9, 2014 For: Construction Equipment • Lancaster, PA Thurs., December 11, 2014 For: Construction Equipment • ONLINE ONLY Wed., December 17, 2014 For: eQuipment Yard COMMONWEALTH OF PA www.auctionsbygov.com 866-469-7383 • Lehighton, PA Tues., October 14, 2014 For: Fall Heavy Equipment Auction DARELL DUNKLE & ASSOCIATES AUCTIONEERS INC. www.dunkleauctioneers.com 800-433-6670 • Harrison, MI Thurs., October 23, 2014 For: Construction Equipment – Trucks & Trailers

DAVIS AUCTIONS www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., December 13, 2014 For: Construction Equipment DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277 • Lucasville, OH Sat., October 18, 2014 For: 10th Annual Southern Ohio Consignment Auction • Rockford, IL Fri., October 24, 2014 For: Northern Illinois & Wisconsin Consignment Auction EQUIFY AUCTIONS, LLC www.equifyauctions.com 888-535-8218 • Wills Point, TX November 6-7, 2014 For: 2 Day Auction Event

JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200

PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com 860-642-4200

• ONLINE ONLY Wed., October 29, 2014 For: Public Surplus Liquidation Auction

• Columbus, OH Thurs., October 16, 2014 For: Area Contractors & Equipment Dealers

• Brooklyn, MS November 21-22, 2014 For: 2 Day Fall Public Auction

• Newark, NJ Thurs., October 30, 2014 For: Heavy Construction Equipment & more

J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE

• South Windsor, CT Fri., November 7, 2014 For: Complete Dispersal – Folsom Construction, LLC

• Dallas, TX Thurs., October 16, 2014 For: Heavy Equipment • South Beloit, IL Sat., October 23, 2014 For: Heavy Equipment • Boston, MA Thurs., October 25, 2014 For: Heavy Equipment • Kansas City, MO Thurs., November 6, 2014 For: Heavy Equipment • Philadelphia, PA Thurs., November 8, 2014 For: Heavy Equipment • Charlotte, NC Sat., November 13, 2014 For: Heavy Equipment • Portland, OR Thurs., November 20, 2014 For: Heavy Equipment

HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493

• Rome, NY Sat., November 22, 2014 For: Heavy Equipment

• Marietta, PA Fri., October 17, 2014 For: Truck, Trailer & Equipment Auction

• Lansing, MI Thurs., December 6, 2014

HILCO INDUSTRIAL, LLC www.hilcoind.com 877-37-HILCO • ONLINE ONLY Wed., November 5, 2014 For: City of Detroit Major Municipal Auction I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Foley, MN Fri., December 5, 2014 For: Heavy Construction Equipment, Truck & Trailer IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid! • ONLINE ONLY October 16, 2014 • ONLINE ONLY October 23, 2014 • ONLINE ONLY October 29, 2014 • ONLINE ONLY November 19, 2014

• Atlanta, GA Thurs., December 11, 2014 • West Palm Beach, FL Sat., December 13, 2014 MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888 • Easley, SC Wed., October 15, 2014 For: One Owner Absolute Auction

• Plaistow, NH November 14-15, 2014 For: Complete Dispersal – S&R Construction Enterprises PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Tues., October 21, 2014 For: Truck & Trailer Auction • ONLINE ONLY Thurs., October 23, 2014 For: Construction Equipment • ONLINE ONLY Thurs., November 6, 2014 For: Construction Equipment SHETRON AUCTIONS www.shetronequipment.com 717-532-8828 • Shippensburg, PA Fri., October 31, 2014 For: Construction & Farm Equipment • Shippensburg, PA Fri., December 19, 2014 For: Construction & Farm Equipment UTILITY AUCTIONS www.utilityauctions.net 302-530-9103 • Wilmington, DE Fri., October 24, 2014 For: Construction, Utility & Forestry Equipment

• ONLINE ONLY October 20 - 27, 2014 For: Machine Shop Equipment, Pumps, Tools, Presses & more

WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-5700

• Pelzer, SC November 14-15, 2014 For: Construction Equipment

• Princeton, MN Sat., December 6, 2014 For: Heavy Equipment

NORTH COUNTRY AUCTIONS www.northcountry-auctions.com 603-539-5322

YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990

• Wrentham, MA Sat., October 18, 2014 For: Construction Equipment NITKE AUCTIONS www.nitkeauctions.com 715-693-4447 • Wausau, WI October 24 - 25, 2014 For: 49th Annual Contractors Auction

• Berlin Center, OH Tues., October 21, 2014 For: Construction Equipment, Trucks & Trailers • Darlington, PA Thurs., October 23, 2014 For: Construction Equipment, Trucks & Trailers • Kissimmee, FL February 9-16, 2015 For: 41st Annual – 7 day Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 99

LATE MODEL CONSTRUCTION EQUIPMENT, AERIAL LIFTS, FORKLIFTS, (14) LATE MODEL QUAD AXLE DUMP TRUCKS, (30) TRUCK TRACTORS, (35) WALKING FLOOR, VAN & LOWBOY TRAILERS AUCTION

AUCTION

RACINE (STURTEVANT),

LATE MODEL RENTAL RETURN AUCTION CAT, KOMATSU, JOHN DEERE CONSTRUCTION & OILFIELD EQUIPMENT, TELESCOPIC FORKLIFTS, BOOM & SCISSOR LIFTS, SUPPORT, TRUCKS & TRAILERS.

AUCTION

COLUMBUS, OHIO

WISCONSIN NOTE: This Auction Will Consist Of Late Model Cat, John Deere Construction Equipment Plus A Group Of Late Model Dump Trucks, Truck Tractors, Lowboys As New As 2014 that are in Like New Condition.

(DELAWARE COUNTY FAIRGROUNDS) NOTE: This sale contains late model, low houred rental fleet equipment that is the exception, not the norm.

EARLY HILITES: 4 VACUUM TRUCKS: (2) 2012 Peterbilt 388 (tri.), Sterling LT9522, Mack CH612, SERVICE TRUCK: 2012 Kenworth T270, 15 DUMP TRUCKS: 2012 Peterbilt 388 (quad.), 2008 Kenworth T800 (tri.), 2013-(6) 2007 Kenworth T800 (quad.), 1998 Kenworth T800 (quad.), 2010 Int’l 4300 (s/a), 2006 Int’l 5900I (tri.), (2) 2003 Mack RD688S (quad.), 1993 Ford LNT8000 (t/a), 30 TRUCK TRACTORS: 2015 Western Star W4900 Glider (t/a), (2) 2008 Int’l Prostar (t/a), 2008 Int’l 5600I (tri.), 2006 Int’l. 5900I (tri.), 2008 Peterbilt 379 (t/a), 2007-2005-(3) 2004 Freightliner CST120, (2) 2007-2006-(3) 2005-(2) 20042003-2002 Freightliner CL120, 2001 Freightliner CST112 (t/a), 2001 Freightliner FDL112 (t/a), 2000 Freightliner C120, 2007 Volvo VN Series (t/a), 2008 Mack CXU613 (t/a), 2006 Mack CNH613 (tri.), 2001 Mack CL713 (tri.), 2000 Kenworth W900 (tri.), 6 DETACHABLE GOOSENECK TRAILERS: Unused 2014 Talbert T(4)-55CCHRG-T1 (tri), Talbert T(4)DW-55SA-HRG-1-T1 (tri), Talbert 50 Ton (tri), 2015 Witzco RG50 (tri.), 2015 Witzco NGB-35 (t/a, non-ground), Trail King TK800G252, 7 TIPPER TRAILERS: 2006-2005 East 48ft. (t/a), 2000-(2) 1999- (2) 1998 J&J 48ft. (t/a), 29 WALKING FLOOR TRAILERS: (3)2004-2003-(4) 2002-(6) 2001-(5) 2000 J&J (t/a), (2) 2004-(6) 2003 MAC (t/a), (2) East 2001 (t/a), 2 ROUGH TERRAIN CRANES: Grove RT-422, Linkbelt HSP-8018, 5 HYDRAULIC EXCAVATORS: Cat 330CL, Cat 304.5, 2005 Komatsu PC300LC-7, Hitachi EX200LC-3, 2007 Takeuchi TB135, 2 EXCAVATOR THUMBS: (2) New Tomahawk, RUBBER TIRED LOADERS: Volvo L220E, CRAWLER TRACTOR: Cat D5HLGP-II, TRACTOR LOADER BACKHOE: Case 580 Super M (4x4), 4 RUBBER TRACKED SKID STEERS: 2006 JD CT322, 2005 ASV RC100, Cat 277C XPS, Bobcat T190, 5 SKID STEERS: 2013 Bobcat S130, Bobcat 873G, 2007 Cat 252B, Cat 236, 2007 Case 410, BOOM LIFT: 2007 Genie Z34/22N, 2 SCISSOR LIFTS: 2006 JLG 1930ES, 2006 Skyjack 3219, AIR COMPRESSOR: 2005 IR P185WJD, JAW CRUSHER: Lippmann 12x48, LOADER LANDSCAPE TRACTOR: 2005 JD 210E (4x4), AGRICULTURAL TRACTOR: 2008 Cat MT965B (4x4), 13 SCRAP HOPPERS: Unused 5 yd., (2) Unused 2 yd., (6) Unused 1.5 yd., (2) Unused 1 yd., (2) Unused ½ yd., 8 SNOW EQUIPMENT: Master Craft Welding SP-144WL 12ft. Snow Pusher, Master Craft Welding SP-120WL 10ft. Snow Pusher, Master Craft Welding SP-120SS 10ft. Snow Pusher, Master Craft Welding SP-96SS 8ft. Snow Pusher, Master Craft Welding SP-78SS 6ft. 6in. Snow Pusher, Master Craft Welding SP-72SS 6ft. Snow Pusher, WOOD CHIPPER: Bandit, VAN TRUCK: 2008 Int’l 4300, 3 FLATBED TRUCKS: 2012 Int’l 4400 (s/a), 2006 Ford F350 (s/a), 1997 Ford F700 (s/a), CAB & CHASSIS: 2006 Ford F550XL, DUMP TRAILER: 2008 Trailstar 38ft. (t/a), 11 VAN TRAILERS: 2000-1999 Monon (t/a), 1999 Trailmobile (t/a), 1999-(2) 1998 Great Dane (t/a), 1999 Utility (t/a), 1998 Fruehauf (t/a), 1998 Hyundai (t/a), 1998 Strick (t/a), GOLF CART: Ez-Go, 3 RECREATIONAL VEHICLES: (2) New 110 CC 4 Wheeler, New Elec Power Wheel, 3 DUMP BODIES: Trailstar 20ft. Aluminum, Alfab 18ft. Aluminum, Henderson HD 16ft. Steel, 3 ROAD PLATES: (3) Unused 48in. x 100in., SNOW PLOW & SPREADER: Flink 12ft. Truck Snow Plow, TIRES: Unused (4) 12-16.5/F Forerunner SKS-1, 2 PRESSURE WASHERS: (2) New Easy Kleen Magnum Gold, ATTACHMENTS: Skid Steer: (2) New Tomahawk 72in. Rock Bucket, (2) New Tomahawk 78in. Snow & Mulch Bucket, (2) New Tomahawk 72in. Smooth Bucket, (2) New Tomahawk 66in. Brush Grapple (1 cylinder), (2) New Tomahawk 66in. Smooth Bucket, (2) New Tomahawk 66in Grapple Bucket (1 cylinder), (2) New Tomahawk Stump Bucket, (6) New Tomahawk 42in. Fork Frame, (4) New Tomahawk HD Hay Spear, (10) New Tomahawk Quick Attach Mount Plate, Telescopic Forklift: Unused Fork Lift Boom Extension, Unused 6in.x84in. Fork Extension, NEW SUPPORT EQUIPMENT: New Mustang LF88 Plate Compactor, New Mustang MP4800 2in Submersible Pump, New Mustang CV3500 Concrete Vibrator, New 4 Pack 10lb. Ratchet Straps, New 3pc. 14in. Premium Diamond Blades, New Huskie 11218SDS Hammer Drill, New Huskie B65 Jack Hammer, New 1in. Drive Air Impact Wrench, New 1/2in. Drive Aim Impact Wrench Kit, New 2in. x 50ft. Discharge Water Hose, New 3pc. Air Spray Gun Kit, New Auto Darkening Welding Helmet, New 3/8in. x 50ft. Automatic Air Hose Reel, New 5 Ton Digital 4ft. x 4ft. Platform Scale, New 3/4in. x 50ft. Jack Hammer Air Hose, New Discharge Water Hoses, New Stiff Neck Pintle Hitches.

HILITES: 7 CRAWLER TRACTORS: 2009-(2) 2008 Cat D8T, 2005 Cat D6RXW-II, 2005 Cat D6RXL, 2007 Cat D6N, 2010 Case 850L, CRAWLER LOADER: JD 655C, 9 HYDRAULIC EXCAVATORS: (2) 2013 Demo JD 245GLC, 2012 Cat 316EL, Cat 315CL, Hitachi ZX370, (4) 2011 Komatsu PC200LC-8, 2 EXCAVATOR THUMBS: (2) New Tomahawk, MOTOR GRADER: Huber M-850A (GPS), 2 TRACTOR LOADER BACKHOES: (2) 2007 Case 580M (4x4), RUBBER TRACKED SKID STEER: 2006 Bobcat T250, 2 TELESCOPIC FORKLIFTS: JCB 520, Skytrak (4x4), 8 GENERATORS: (8) IR S60 60KW, 3 AGRICULTURAL TRACTORS: JD 4040 (4x4), JD 3640 (4x4), JD 3140 (4x4), BOOM TRUCK: 2006 Int’l 4200, 4 WALKING FLOOR TRAILERS: 2005 MAC 48ft. (t/a), (2) 2001-1997 J&J 48ft. (t/a), 10 DUMP TRAILERS: 1997-(2) 1995-(4) 1994-(2) 1993 Trailstar (tri.), 1995 East (tri), 8 SNOW EQUIPMENT: Master Craft Welding SP-144WL 12ft. Snow Pusher, Master Craft Welding SP120WL 10ft. Snow Pusher, Master Craft Welding SP-120SS 10ft. Snow Pusher, Master Craft Welding SP-96SS 8ft. Snow Pusher, Master Craft Welding SP-78SS 6ft. 6in. Snow Pusher, Master Craft Welding SP-72SS 6ft. Snow Pusher, 2 PRESSURE WASHERS: (2) New Easy Kleen, ATTACHMENTS: Skid Steer: (2) New Tomahawk 72in. Rock Bucket, (2) New Tomahawk 78in. Snow & Mulch Bucket, (2) New Tomahawk 72in. Smooth Bucket, (2) New Tomahawk 66in. Brush Grapple (1 cylinder), (2) New Tomahawk 66in. Smooth Bucket, (2) New Tomahawk 66in Grapple Bucket (1 cylinder), (2) New Tomahawk Stump Bucket, (6) New Tomahawk 42in. Fork Frame, (4) New Tomahawk HD Hay Spear, (10) New Tomahawk Quick Attach Mount Plate, NEW SUPPORT EQUIPMENT: New Reading ATBV96 Aluminum Diamond Plate Tool Box, New Reading ATBV89 Aluminum Diamond Plate Tool Box, New Reading ATBV88 Aluminum Diamond Plate Tool Box, New Reading ATBV49 Aluminum Diamond Plate Tool Box, (2) New Mustang LF88 Plate Compactor, (3) New Mustang MP4800 2in. Submersible Pump, (2) New Mustang CV3500 Concrete Vibrator, (4) New 4 Pack 10,000lb Ratchet Straps, (8) New 3pc. 14in. Premium Diamond Blades, (2) New Huskie 11218 SDS Hammer Drill, (3) New Stiff Neck Pintle Hitch, (2) New 1in. Drive Air Impact Wrench, (3) New 1/2in. Drive Air Impact Wrench Kit, (6) New 2in.x50in. Discharge Water Hose, (4) New Auto Darkening Welding Helmet, (2) New 3/4in.x50in. Automatic Air Hose Reel.

DIRECTIONS: From General Mitchell Int’l Airport in Milwaukee: (approx. 20 min.), take I-94S to Exit 333, Hwy 20. Proceed to East Frontage Rd., go South to auction site on left. From Chicago O’Hare Field: (approx. 45 min.), take I-294 N to I-94 N. Proceed to Exit 333, Hwy 20E, continue to East Frontage Road. Address: 1755 S. E. Frontage Road, Sturtevant, WI 53177.

DIRECTIONS: From the North/South: take I-71 to Rte. 36 & US 37 Exit, proceed West on Rtes. 36 & 37 for 9 miles to Delaware. Turn right on Rte. 23 North for 1.2 miles to the sale site. Entrance on left at the Travelodge. From the East/West: Take I-70 to I-270 bypass, proceed North on I-270 to I-71 to Exit for Rtes. 36 & US 37 and proceed as noted above. NOTE: Auction Entrance is off of Rt. 23.

Address: 935 U.S. 23 North Delaware, OH 43015.

SITE PHONE: 262-886-2778, (262) 903-6269, SITE FAX: 262-886-2369 REGISTERED WI AUCTION FIRM: #223-053 Alex Lyon & Son, Sales Managers & Auctioneers, Inc. REGISTERED WISCONSIN AUCTIONEER: #1878-052 Jack Lyon

SATURDAY, OCT. 18 @ 9:30 AM

OHIO LICENSE #: 63199360809, OHIO AUCTIONEER LICENSE #: 62199360989

SATURDAY, NOV. 1 @ 9:30 AM

ALEX

LYON & SON Sales Managers & Auctioneers, Inc.

Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY (Evenings) (315) 637-8912 www.lyonauction.com

Page 100 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 101

ONE OWNER - ABSOLUTE AUCTION JOB COMPLETION LIQUIDATION CONSTRUCTION EQUIPMENT - TRUCKS & TRAILERS

CRAWLER TRACTOR: CATERPILLAR D4H SERIES II; LOADER BACKHOES: CASE 680K; CASE 590 4X4 TURBO; CASE 580 SUPER K 4X4 W/ EXTENDAHOE; CASE 580 SUPER K 4X4; CRANE: P & H CENTURY 128; EXCAVATORS: CATERPILLAR 320L; KOBELCO SK220LC MARK III; KOBELCO SK220LC MARK IV; KOBELCO SK200LC MARK IV; KOBELCO SK200LC; JOHN DEERE 690D-LC; HITACHI EX120-3; SKID STEER LOADER: CASE 1845C; ROAD MAINTENANCE EQUIPMENT: ROLLERS: (2) DYNAPAC CA-12D 48" VIBRATORY; BOMAG BW60HD 68"; BOMAG BW75S 30" TANDEM WALK-BEHIND; PAVER: BIDWELL B362 PAVER W/ PAVER SECTIONS; SCREED: TERRAMITE CLARION STYLE ROLLER SCREED W/ 3-15' & 3-30'; TEREX OMS1-0L26 VIBRATORY MORRISON STYLE POWER SCREED; MANLIFTS: GENIE Z-60 4X4; GENIE S-60; DUMP TRUCKS: 1987 INTERNATIONAL S1954; 1983 INTERNATIONAL S1954 W/ ATTENUATOR; 1983 INTERNATIONAL S1954; 1980 INTERNATIONAL 1954;

BECDIR CONSTRUCTION CO. 15764 W. AKRON-CANFIELD ROAD BERLIN CENTER, OH 44401

TRAILERS: 1976 FRUEHAUF 6500 GAL. TANKER; (2) FONTAINE 45' SPREAD AXLE; 1989 HURST T/A TAG; 1975 TRI-AXLE TAG; 1997 HOMEMADE T/A CAR HAULER; 1986 SOIL TRAILER; 1969 TOTEM ALL 610 FLATBED; SUPPORT EQUIPMENT: AIR COMPRESSORS; MESSAGE BOARDS; LIGHT TOWER; 6" TLR. MTD.WATER PUMP; ROCK SPLITTER; WATERBLASTER; TLR. MTD. WELDER; TRAILER MTD. 4" CONCRETE PUMP; ATTACHMENTS: LARGE AMOUNT OF BUCKETS, FORKS, ATTACHMENTS FOR EXCAVATORS, LOADER BACKHOES, CRANE AND SKID STEERS; ETC.

TUESDAY, OCTOBER 21, 2014 - 9:00 AM

FLATBED TRUCKS: 1989 MACK MS200; 1992 INTERNATIONAL 4700; (2) 1991 INTERNATIONAL 4700; MISCELLANEOUS TRUCKS: 1985 VAC ALL CRANE CARRIER CAB & CHASSIS; 1977 FORD LIFT FLAT 32' BUCKET; 1981 FORD LF8000 W/ NATIONAL 756 CRANE; PICKUP TRUCKS: (2) 2002 DODGE RAM 2500; 2005 FORD F250; 2001 FORD F250 W/ UTILITY BED; 1998 DODGE RAM 2500; VANS: (2) 2006 FORD ECONOLINE; DUMP TRAILER: 1986 PIONEER;

Terms: Payment in full on Sale Day by Cash, Cashier’s Check or Certified Checks. Personal and Company Checks MUST have bank letter of guarantee. Additional terms can be found in the sale day catalog. Note: There is a five (5%) percent buyer’s premium on items over $1,000. There is a ten (10%) buyer's premium on items $1,000 or less. Online bidding will be provided, visit www.yoderandfrey.com. There is a 2% additional buyer's premium for online purchases.

Auction Firm Lic# 63198716259

V. Peter Clark Lic# 2003000092

Please check our website (www.yoderandfrey.com) and future advertising for updated information. Please call 1-800-842-6221 for more information.

11th FALL AUCTION CONSTRUCTION EQUIPMENT - TRUCKS & TRAILERS 423 ASHWOOD ROAD • DARLINGTON (PITTSBURGH), PA 16115

THURSDAY, OCTOBER 23, 2014 - 9:00 AM ANNOUNCING: THE COMPLETE LIQUIDATION OF PATKEN CONSTRUCTION CO., INC. OTHER AREA CONTRACTORS & DEALERS WILL BE PARTICIPATING. QUALITY CONSIGNMENTS ACCEPTED - CALL 800-842-6221 OR 304-266-2955

CRAWLER LOADERS: CATERPILLAR 953B; CATERPILLAR 953; CATERPILLAR 943 CRAWLER TRACTORS: CATERPILLAR D5C-XL; FIAT ALLIS HD 31; CATERPILLAR D4E; RUBBER TIRED LOADER: CATERPILLAR 924G IT; LOADER BACKHOE: CATERPILLAR 420D 4X4; CASE 580K SERIES III ; EXCAVATORS: CATERPILLAR 315BL; KOBELCO SK160LC DYNAMIC ACERA; JOHN DEERE 690ELC; NEW HOLLAND EC270; DAEWOO 450; MINI EXCAVATORS: IHI IS30G; KOMATSU PC20-5; SKID STEER LOADER: CASE 1845C; GEHL SL5625; ROLLERS: DYNAPAC CA115 66" SINGLE DRUM VIBRATORY; BOMAG 211D-3 SINGLE DRUM VIBRATORY; RAMMAX DITCH ROLLER; FORKLIFTS: LULL 844 HIGHLANDER 8K#; SKYTRAK 7038 6K#; MANLIFTS: JLG 600AJ; SIMON MP110; DUMPERS: TEREX PTR6000; TEREX PS6000; TEREX PSR4000; TEREX PTR3000; TEREX PSR3000; TEREX HD1000; END DUMP: TEREX TA30 FARM TRACTORS: JOHN DEERE 4520 4X4; JOHN DEERE4050 4X4; JOHN DEERE 4040; JOHN DEERE 4650 4X4;NEW HOLLAND 8340 4X4; NEW HOLLAND TS110; (4) NEW HOLLAND

TS90; MASSEY FERGUSON 8120 4X4; MASSEY FERGUSON 362A; TAFE 45DI 4X4; TRUCK TRACTOR: 2001 KENWORTH; 1994 PETERBILT MICHIGAN SPECIAL; DUMP TRUCKS: 2000 MACK TRI-AXLE; 1994 MACK RD688S TANDEM AXLE; 1988 WESTERN STAR TANDEM AXLE; 1976 MACK DM685S TANDEM AXLE; 1995 INTERNATIONAL 4700 SINGLE AXLE; 1993 FORD F350 4X4 SINGLE AXLE; PUMP TRUCK: 2003 MACK MR W/ PUMPSTAR 42M PUMP; WINCH TRUCK: 2003 MACK CV713; FLATBED TRUCK: 2005 CHEVROLET 7500; SERVICE TRUCKS: 2004 FORD F350; 2003 FORD F550 4X4 CREW CAB; TRAILERS: 1995 TRAIL KING 35 TON LOWBOY; 2000 LOADKING 25 TON TAG; 1980 SHOPMADE 50 TON 53' ROLL TRAIL-

ER; 1980 VULCAN T/A ROLL TAIL W/WINCH; 2014 TOPLINE 6.4'X12'; 1984 HAULMORE ENCLOSED CAR HAULER; 2014TOPLINE 5'X10'; (2) 2014TOPLINE 6.4'X12; 2014TOPLINE 5'X13'; 2014BIG BEE 6'X12' DUMP; 2004 TOPLINE TANDEM AXLE TAG; MISCELLANEOUS: PALLET FORKS; (4) SELFDUMPING HOPPERS; STEEL TRACKS, (3) RIPPERS; AIR COMPRESSOR; TRENCHER FOR SKID STEER; BUCKETS; BROOM;LAWN TRACTOR & CART; RAKE; (2) DISC HARROWS; ONE ROW 3PT MIDDLEBUSTER; 3PT SPIN SPREADER; (3) 3PT BOOM POLES; (2) PRESSURE WASHERS; GENERATORS; HAMMER; PLATE COMPACTOR; TOOLS; (3) ROTARY CUTTERS; (2) BOX BLADES; ETC. Terms: Payment in full on Sale Day by Cash, Cashier’s Check or Certified Checks. Personal and Company Checks MUST have bank letter of guarantee. Additional terms can be found in the sale day catalog. Note: There is two (2%) percent buyer’s premium on items over $1,000. There is a ten (10%) buyer's premium on items $1,000 or less. Online Bidding is provided. Visit www.yoderandfrey.com to bid online. There is an addditonal 2% buyer's premium for online purchases.

Auctioneer: V. Peter Clark Lic# AU005098 PA Auc. Co. Lic # AY000267L PA Auc. House Lic.# AH001793 Please check our website (www.yoderandfrey.com) and future advertising for updated information. Please call 1-800-842-6221 for more information.

Sale Conducted By: 1670 Commerce Road Holland, OH 43528 www.yoderandfrey.com

419-865-3990 Fax: 419-865-4595 Email: info@yoderandfrey.com

Page 102 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

More Than 2,140 Bidders Participate in Ritchie Bros. Sale

ore than 2,140 bidders participated online and in person at Ritchie Bros. Auctioneers’s multi-million dollar unreserved public equipment auction in Chicago on Oct. 2. Bidders came from 45 countries, including 48 U.S. states. More than 63 percent of the equipment was sold to out-of-state buyers, from as far away as Guatemala, Dominican Republic and Greece. Online bidders purchased 50 percent of the equipment sold (by dollar value). In total, more than 1,650 equipment items were sold in the auction.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Making the trip down from Wausau, Wis., are James Barry (L) and Mark Wisinski of Swiderski Equipment Inc. Abe Salameh, president of United Heavy Equipment Inc., just bought this Cat 140G motorgrader.

Wes Whittaker of Whittaker Salvage checks out the rail equipment at the Morris, Ill., sale.

Greg Tallarico of United Rentals looks over this Cat 330D excavator.

Making sure the shear attached to this Cat 330D excavator is ready to do some cutting is Wayne Erickson of Erickson Auto Parts in South Beloit, Ill.

In front of the Cat 140H motorgrader that he just bought is Jamal Saleh of All City Equipment Inc.

Justin Schrieffer of Renzo Excavating inspects this Takeuchi TL140 compact track loader.

The guys from Midwest Sealcoat came to see if they could take some iron home with them. (L-R) are Collin Thuer, Steve Thuer and Junior Munoz.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 103

SC&R Foundation Expands Its Grant Program to Award an Additional $25K The SC&R Foundation has expanded its grant program for individuals wishing to further careers related to the crane, rigging and specialized transportation industry through continuing education courses or a vocational/technical program. Throughout the remainder of 2014, the foundation intends to award up to an additional $25,000 in grants on a rolling basis. Going forward, grants will be reviewed six times per year. Applications are being accepted now for the next grants, which will be announced in September. In a departure from previous policy, these grants also are open to the public rather than limited to employees or rel-

atives of SC&RA member companies. This strategic change is among a number of steps the foundation is taking to help member companies fill the industry’s labor shortage. As always, recipients must use the grants to take a continuing education course or attend vocational/technical programs and enroll in courses such as welding or diesel mechanics, which are vital to companies in the industry. Awards typically range from $1,000 to $5,000 each. Previously this year, the foundation awarded grants totaling $5,000 to three employees of Specialized Carriers & Rigging Association (SC&RA) member companies. These awards were

announced during the SC&RA Annual Conference, April 22 to 16, in Boca Raton, Fla. The foundation also plans to continue awarding annual scholarships to students working toward an undergraduate or graduate degree in preparation for careers related to crane, rigging and specialized transportation. The next round of scholarships will open in September. For more information, call 703/698-0291 or visit www.scr-foundation.org. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

V i s i t C E G ’s We b S i t e a t www. C o n s t r u c t i o n E q u i p m e n t G u i d e . c o m

ANNUAL FALL CONTRACTORS AUCTION Construction Equipment – Trucks & Trailers 3284 E. Arnold Lake Rd., Harrison, MI 48625

October 23, 2014 • 10:00 AM DIRECTIONS: 110 Miles North of Lansing on US 127 to the Second (North) Harrison Exit 176 (Old 27), Turn Right (East) on Arnold Lake Rd. Follow the Auction Signs to Sale Yard. 2-3 Auction Rings Throughout the Day! HYDRAULIC EXCAVATORS: HITACHI EX200LC-3; KOMATSU 200; HYUNDAI R290L33; HITACHI EX200 LC-5KOBELCO 200 MINI EXCAVATOR: TAKEUCHI TB145 CRAWLER DOZERS: 2005 JOHN DEERE 450J LGP; DRESSER TD15E; DRESSER TD15E RUBBER TIRE LOADERS: HYUNDAI IC740 TM-3 MOTOR GRADERS/SCRAPERS: CHAMPION 720A; JOHN DEERE 762B DIRECTIONAL BORING UNITS: SIMCO; DITCHWITCH 8-60 JET TRAC TRACTOR/LOADER/BACKHOE: JOHN DEERE 310D; CASE 580K, S/N TQ310CA756275, 4X4, ROPS; CASE 580L SERIES 2 TELESCOPIC FORK LIFTS: 2004 JLG LULL 644E42 HYDRAULIC CRANE: GROVE TMS25 VIBRATORY ROLLER: MULTIQUIP VR-36HA LANDSCAPE EQUIPMENT: FINN 1500 HYDRO SEEDER; FINN B260 STRAW BLOWER SKIDSTEERS: 2004 BOBCAT T190 RUBBER TRACK; 2004 CASE 75XT; 2000 BOBCAT 873G; 2000 BOBCAT 773G; NEW HOLLAND LX 885 TURBO SKIDSTEER ATTACHMENTS: (3) 66" TOMAHAWK BRUSH GRAPPLE, One Cylinder; (3) 66" TOMAHAWK GRAPPLE BUCKET, One Cylinder; (2) 72" TOMAHAWK HD BRUSH GRAPPLE, Two Cylinder; (2) TOMAHAWK STUMP BUCKET; (2) 66" TOMAHAWK SMOOTH BUCKET; (2) 72" TOMAHAWK SMOOTH BUCKET; (2)72" TOMAHAWK ROCK BUCKETl (10) TOMAHAWK QUICK TACH MOUNT PLATESl (2) 78" TOMAHAWK SNOW/MULCH BUCKET; (8) 42" FORK FRAME & FORKS; (6) TAMAHAWK HD HAY SPEAR, Single Tine UTILITY/FARM TRACTOR: 1950'S JOHN DEERE MC TRUCK TRACTORS: INTERNATIONAL; 1995 MACK CH613; 1990 MACK CH613; 2000 INTERNATIONAL DUMP TRUCK: 1994 MACK CH613

LEAD & PUP TRAILERS: 1977 FRUEHAUF PUP DUMP; 1974 FRUEHAUF LEAD DUMP; 1974 FRUEHAUF LEAD DUMP; 1973 FRUEHAUF LEAD DUMP; 6 AXLE PUP LOWBOY TRAILER: 2001 TRAILKING 33 TON; 1978 TRANSPORT 50 TON; 1972 NELSON SM15F V BOTTOM TRAILER: 1969 V BOTTOM, S/N V7019 TAG/UTILITY TRAILERS: 1988 24T TOW MASTER; 16' TANDEM AXLE; 24' BOAT TRALER VAN TRAILERS: 1993 48' OSHKOSH; 1988 GREAT DANE; 1986 48' MONO"; 1985 FRUEHAUF OFFICE TRAILERS: 32' TRAILER; (2) 44' TRAILERS; 46' TRAILER SHIPPING CONTAINER: (2) 2004, 20' Long X 8' Wide, Good Condition PICKUP & VANS: 2005 CHEVROLET SILVERADO; 1996 CHEVROLET 3500; 2002 CHEVROLET VENTURE MOTOR HOME: 1994 FLEETWOOD FLAIR, LIKE NEW PROPANE TANKS: 1000 GALLON; (15) ASSORTED 500, 330 & 120 GALLON TANKS SUPPORT EQUIPMENT: RICE LAKE WEIGHING SYSTEM TRUCK SCALES; TRUCK BED WITH BUCKET; BLUE POINT 6.5HP AIR COMPRESSOR; ELITE MANUFACTURING PRESSURE WASHER; 2 WHEEL CAR DOLLY W/RAMPS & TIE DOWNS; 8' SNOWPLOW; LANDELL 8' SNOWBLOWER 3POINT ATTACHMENT; SHEET METAL ROLL, WILL ROLL UP TO 1/4" PLATE; PULSE 2 DOOR REACH IN COOLER W/CONDENSER, MDL#4LG50RD-5; MASTER BILT 3 DOOR REACH IN COOLER W/CONDENSER, MDL#BLG-74R; GREENLEE JOBSITE TOOL BOX; 50,000 BTU TORPEDO HEATER; 275 GALLON TANK; 125 GALLON FUEL TANK; 5000LB AXLES WITH SPRINGS; APPLE CRATE; ASSORTED CABLES; JOHN DEERE 8' 2 PIECE CUTTING EDGE

Check our website www.dunkleauctioneers.com for updates as more equipment is arriving daily. Accepting Quality Equipment

Darell Dunkle 989-429-5336 • Office: 800-433-6670 E-Mail: info@dunkleauctioneers.com

Page 104 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NORTHERN ILLINOIS & WISCONSIN CONSIGNMENT AUCTION FRIDAY, OCTOBER 24, 2014 • 9:30 A.M.

2100 N CENTRAL AVENUE • ROCKFORD, IL 61101 Auction Held at Adams Equipment Yard Selling Equipment for: Local & Regional Contractors, Banks, Lending Institutions and Rental Companies Can’t Make it to the Auction? BID LIVE ONLINE! Register for this auction on proxibid.com

CRAWLER TRACTORS: ‘05 Case 1650K, 6K Hours, ‘71 Cat D8H with Ripper, Less Than 1K Hours on Re man. Tran. & Final Drives, Cat D6R XL, ’87 D6H, Case 650, CRAWLER LOADER: Cat 963LGP, CAB, EXCAVATORS: Cat 330CL, Cat 325CL Long Reach, ‘96 Cat 325BL, ‘04 Cat 315CL, ‘99 Cat 315BL, ‘98 Hitachi EX230LC-5, ‘97 Hitachi EX200LC-5, ‘00 New Holland EC130LC, IHI 30NX-2 Mini, Bobcat X337 Mini, FORKLIFTS: Cat TH103 & ‘96 JCB 506B Telescopics, Cat V90, 10K# Capacity, Case W14 Forklift, MANLIFTS: ‘98 Snorkelift TB60 Boom Lift, Genie GS-1930 Man Lift, COMPACTION EQUIPMENT: ‘06 Hamm HD13 Double Drum Roller, Raygo Romper 2-36 Roller, SKID LOADERS: ‘12 Deere 326D, ‘11 Case SV250, Deere 332, Case 450CT Series 3 Track, Bradco BC72 Bushog, Several Skid Loader Buckets, Several Snow Pushers, TRACTORS: Deere 5500 Ag, ‘01 TYM LT 300H Utility, Diesel, 4x4, 1 Owner, TRENCHERS: Case 760, ‘06 Vermeer RT100, 200 Hrs, 1 Owner, GRADER & SCRAPER: ‘80 Cat 140G Grader, Cat 627B Push/Push Scraper, Less Than 20 Hrs on

DON SMOCK AUCTION CO., INC. 6531 S. State Road 13, Pendleton, IN 46064

Reman. Rear Tran. CARRY DECK CRANE: Grove 24 6Ton Carry Deck Crane, TRUCK TRACTOR: ‘00 International 9200i Eagle Truck, Stand Up Sleeper, Service Record, DUMP TRUCK: ‘94 Peterbilt Quad Axle Dump Truck, ONE TON TRUCKS & DOWN: ‘03 Ford F350 Super Duty Flatbed, ‘97 Chevrolet 3500HD Dump, ‘06 Ford F250XL Pickup, SPECIALITY TRUCKS: ‘97 Chevrolet T7500 Roll Off, Single Axle, 21’ Deck, ‘99 GMC C7500 50’ Bucket Truck, VARIOUS: Wacker LT4 Portable Light Plant, Diesel, 6KW, Portable L6 Light Tower/Generator, ‘95 50KW Generator, Wacker G25 18KW Portable Generator, Ingersoll Rand 185 & 750 Air Compressor, Miller Big 40 300AMP Portable Welder, Portable JE200 Wood Splitter, CAT 931 2-Way Blade, Balderson Quicktach Grapple fits 950G, Hyster Winch for D8H, MISC: Trailer Hitches, Chicago 60-80# Electric Jack Hammer, Universal 350,000 BTU Heater, Water Pump, WP20 Gas Engine w/Electric Start, Drills, Drill Bits, Chipping Hammers, Antique Fuel Tank w/ Trailer along with late additions. Call Larry Tess @ 317-489-2242 for information

Terms: Complete Payment on Day – Payment May Be Made By Cash or Check. *ALL CHECKS MUST HAVE CURRENT BANK LETTER GUARANTEEING FUNDS* BUYERS PREMIUM: 2% on each item $2,501 & greater 10% on each item $2500 & less Auctioneer: Cal Kaufman 040000363

rstinger@dsaauctions.com • www.dsaauctions.com

765-778-9277 Corporate office

More Than 30 Years Experience...

CEG Appoints Hogeboom to Western Sales Manager Construction Equipment Guide (CEG) has appointed Dennis Hogeboom its new western regional sales manager. Hogeboom brings more than 30 years of combined publishing and sales experience to CEG, having most recently worked as a general manager of a chain of weekly newspapers in upstate New York, Lee Publications. Hogeboom worked for 20 years in the direct mail advertising industry in New York and South Carolina. As western regional manager, Hogeboom will be responsible for working with dealers and manufacturers in the western region to help market their businesses and product lines through print and Web advertising programs, as well as timely editorial support. “It is an honor joining Construction Equipment Guide. I plan to help grow our presence in the Southwest and California, showing potential advertisers here that in no other publication or Web site will they be able to find a more loyal readership and that no other outlet can match CEG’s ability to

Construction Equipment Guide (CEG) has appointed Dennis Hogeboom its new western regional sales manager.

pair equipment buyers with dealers,” said Hogeboom. For more information, call 602/679-8759 or visit www.constructionequipmentguide.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

One-Third to Increase Hires ELFA from page 1

tions will worsen, unchanged from the previous month. • 30.3 percent of survey respondents believe demand for leases and loans to fund capital expenditures (capex) will increase over the next four months, up from 21.2 percent in August. 66.7 percent believe demand will “remain the same” during the same four-month time period, down from 75.8 percent the previous month. 3 percent believe demand will decline, unchanged from August. • 15.2 percent of executives expect more access to capital to fund equipment acquisitions over the next four months, unchanged from August. 84.8 percent of survey respondents indicate they expect the “same” access to capital to fund business, and none expects “less” access to capital, both also unchanged from the previous month. • When asked, 30.3 percent of the executives reported they expect to hire more employees over the next four months, a decrease from 33.3 percent in August. 60.6 percent expect no change in headcount over the next four months, up from 57.6 percent last month. 9.1 percent expect fewer employees, unchanged from August. • 6.1 percent of the leadership evaluates the current U.S. economy as “excellent,”

unchanged from last month. 87.9 percent of the leadership evaluates the current U.S. economy as “fair,” and 6.1 percent rate it as “poor,” both also unchanged from August. • 27.3 percent of the survey respondents believe that U.S. economic conditions will get “better” over the next six months, a decrease from 30.3 percent who believed so in August. 66.7 percent of survey respondents indicate they believe the U.S. economy will “stay the same” over the next six months, unchanged from August. 6.1 percent believe economic conditions in the United States will worsen over the next six months, up from 3 percent who believed so last month. • In September, 15.2 percent of respondents indicate they believe their company will increase spending on business development activities during the next six months, a decrease from 21.2 percent in August. 84.8 percent believe there will be “no change” in business development spending, an increase from 78.8 percent last month. None believe there will be a decrease in spending, unchanged from last month. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 105

The new way to buy used equipment Low, no-haggle pricing. Inspected. Ready for work. Guaranteed.

2007 Skytrak 6042 T elehandler e – $24,500 Telehandler

2006 Mitsubishi FG25N Pneumatic Tir e Forklift For Tire – $10,500

BUY ONLINE

2005 JLG 1930ES Electric Scissor Lift – $4,000

2003 Bobcat S185 Skid-Steer Loader – $14,500

2007 Bobcat 325G Mini Excavator – $15,900

2007 Case 580M Series 2 4x4 Backhoe Loader – $33,900

2005 JLG E450AJ Electric Articulating Boom Lift – $20,900

Equipment featured are a representation of items available on allEquip. Items are sold and added to inventory daily.

Visit Visit allEquip.com or call 855-827 855-827-1515 -1515

Page 106 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Flyover to Separate Dangerous Area on Lakefront Trail

The project is scheduled to be completed in three phases. Crews began work on the $22.5 million first phase last spring and expect to finish it in late 2015.

Construction crews this summer made significant progress on a multi-million dollar project that marries safety with art and may one day redefine the landscape along Lake Michigan. PIER from page 1

Durbin, D-Ill., described as “You take your life in your hands.” “When Mayor Emmanuel did his ground breaking speech, the one thing they touched on was that this is going to take a dangerous area on the Lakefront Trail where cars, bikes and people co-exist and it will separate them,” said Dan Anderson, a senior construction engineer of T.Y. Lin International, which is consulting with the city of Chicago on the project. “The Lakefront trail kind of goes down on lower Lake Shore Drive and through some very busy intersections. This is basically a grade separation to get bikes and pedestrian off the road.” The project is scheduled to be completed in three phases. Crews began work on the $22.5 million first phase last spring and expect to finish it in late 2015. Each phase is expected to take about two years, with completion of the $60 million project set for 2018. Contractor F.H. Paschen/S.N. Neilsen was the low bidder for phase one. The latter two phases have not yet been bid. The largest challenge of building the structure is the fabrication

aspect and the fit up of the pieces while they are being erected, Anderson said. “The main scope is construction of the pedestrian structure. Steel columns, steel spine and a concrete deck. It’s a freestanding structure and part of it is actually built onto the side of Lake Shore Drive. It’s not a huge amount of concrete, only 900 cubic yards. The structural steel is more significant, estimated at about, just the pipe alone, 370,000 pounds. The rest is another 500,000 pounds. It is a significant part of what makes this a complex structure. “The geometry of the entire steel spine — the pipe carrying the structure — is on average 2 and a half feet diameter with 1 and a half inch pipe walls. It’s got horizontal and vertical curves. The steel spine pipe is bent to follow the profile of the bridge. That design is pretty much for the aesthetics. It’s got the center big pipe running through the middle and ribs attached to side of pipe, almost like little wings, and then the deck is poured on top of those ribs.” The flyover, so named for its location near the Navy Pier and its

ability to carry users uninterrupted over congested streets, as well as the Chicago River and DuSable Park, runs from one ramp at ground level to a second over Each phase is expected to take about two years, with completion Upper Lake Shore Drive at about of the $60 million project set for 2018. 20 ft. (6.1 m). There are about 25 construction something to look at down at the to look like. So if there are any real workers on the job daily, but while Lakefront. I think it’s definitely difficulties in construction of the construction is occurring near something everybody will see who mock-up, as well as aesthetically, heavily congested areas, there has comes to this area. It’s right adja- we can address those situations been little interruption in traffic for cent to Navy Pier, where a lot of before we start production of the city commuters. people come through on a day-to- actual bridge. These are freestand“The road closures aren’t signif- day basis. Not only will users of ing models. The actual size, built icant,” he said. “We did have one the Lakefront Trail see the archi- out of the actual construction matelane of upper Lake Shore Drive tectural elements, but also people rials. The reason certain agencies closed while we attached a portion passing under.” Those elements do it this way is they want to make of the new structure to the side of are so important, the city built full sure before they start fabrication the upper Lake Shore Drive bridge. scale mock-ups for three sections and construction of the actual But it’s not going to significantly of the flyover to ensure all the var- bridge that this is the way they impact traffic other than some tem- ious pieces worked as they’d antic- want it to be because it is so archiporary closures, which we try to ipated. tectural, because there are so many restrict to nighttime..” “That was so the Department of disciplines working together.” Other than the challenge of Transportation could look at it and The project is funded by the building the spine, the other signif- say this is what it’s supposed to U.S. Department of Transportation icant challenge is that the design is look like on the plans, but here is using Congestion Mitigation Air architectural. It is meant to be a what is actually going to look like, Quality Improvement (CMAQ) future icon of the city scape. to make sure all the details work monies, with additional funding “There are a lot of stainless steel together,” Anderson said. “The from the State of Illinois. elements to it,” Anderson said. mock-ups were small sections of (This story also can be found on “There is a lot of custom LED the superstructure so you can see Construction Equipment Guide’s lighting. Just the architectural the spine … a 10-foot-long section Web site at www.constructionequipaspect… It’s really supposed to be of what the bridge is actually going mentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 107

LARGE LAND CLEARING OPERATION AUCTION BEST BRANDS & MODELS OF LAND CLEARING EQUIPMENT TO BE OFFERED ANYWHERE!

AUCTION

SAGINAW, MICHIGAN

MAJOR JOB COMPLETION The Auction of the Year...!!! THE BEST OF THE BEST EQUIPMENT AND TRUCKS AVAILABLE IN A LONG TIME! LATE AND GREAT CAT, KOMATSU, VACUUM TRUCKS, MECHANICS & SERVICE TRUCKS.

M.L. Chartier Inc.

AUCTION

PORT HURON (MARINE CITY), MICHIGAN

EARLY HILITES: FORESTRY EQUIPMENT: 2 Feller Bunchers: Case Hydro-Ax 621E, Case Hydro-Ax 411E, Wood Processor: Multi-tech, 2 Saw Heads: Timberjack 608L 22in., Hydro-Ax 22in., 2 Stump Heads: Hydro-Ax #1, Hydro-Ax #2, Tree Shear: Timberwolv, Attachments: Hydro-Ax 7010 Mowing Deck, Fecon BH74 8ft. Mowing Deck, Tree Sprayer, RECYCLER: Bandit Beast 3680, 3 CHIPPERS: Morbark, Bandit 1900, Bandit 1590, 4 RUBBER TIRED LOADERS: Cat 920, Hyundai HL760XTD, Kawasaki 65ZTM, TCM 806, 2 SKID STEERS: Bobcat T190, ASV RC100, MESSAGE BOARD, LOADER LANDSCAPE TRACTOR: Kubota L5030 2 HYDROSEEDERS: Finn 2500gal. on t/a trailer, Skid mounted 18hp, 3 TREE SPADES: 2004 GMC C8500 (t/a), 2001 GMC 3500HD (s/a) , 1993 Peterbilt (t/a), VACUUM TRUCK: GMC 6500 (s/a), SWEEPER TRUCK: 1998 Ford w/Sunvac Sweeper, 2 BUCKET TRUCKS: 1998 Ford F800 w/55ft. Terex Crane, 1992 Int’l. 4700 (s/a), 3 DUMP TRUCKS:1988 Chevy Cheyenne, Chevy Kodiak (s/a), Int’l. S1700 (s/a), 4 TRUCK TRACTORS: 2006 Kenworth T800 (t/a), 2000 Sterling (tri., offsite), 1994 Int’l. 4900 (s/a), 1988 Int’l. (t/a), STAKE TRUCKS: 1999 Chevy 1 ton, SERVICE TRUCK: 2004 Chevy (s/a), VAN TRUCK: 1992 GMC, TAGALONG TRAILER: 2004 Towmaster (t/a), 2 GRAVEL TRAIN TRAILERS: 1998 Fruehauf (Lead), 1998 Fruehauf (Pup), LOG TRAILER: (t/a) w/ set of B Trains, STORAGE VAN TRAILER: 1978 Monon (t/a), UTILITY TRAILER; (t/a), DUMP BODIES: 3 yd. Steel, SUPPORT/MULCH/ SNOW EQUIPMENT: (10) Snow Pushers, (4) Sets of Steel Tracks, Man Basket, 5000-7000 yards of Hardwood Mulch- no debris, Lofton Head, (2) Bush Blades, Leaf Blower, Kawasaki Blade, NEW SUPPORT EQUIPMENT: (4) New Mustang LF88 Plate Compactors, New Mustang ML80S Rammers, New Mustang M30 Core Drill, New Mustang MP3 3in. Water Pump, (3) New Mustang MP4800 2in. Submersible Pumps, (3) New Mustang CV3500 Concrete Vibrators, (12) New 3pc. 14in. Diamond Blades, (6) New 6 packs of 14in. Abrasive Blades, (6) New 4 packs of 10,000lb. Ratchet Cargo Straps, New 5 Ton Digital 4ft. x 4ft. Platform Scales, New Huskie 11218 SDS Hammer Drills, (4) New 1in. Drive Air Impact Wrenches, (4) New 1/2in. Drive Air Spray Gun Kits, (6) New 2in. x 50ft. Discharge Water Hoses, (4) New Stiff Neck Pintle Hitches.

Address: 880 E Kochville Rd. Saginaw, MI 48604.

NOTE: M.L. Chartier one of the top contractors in the state of Michigan has finished several jobs at the same time and is selling some of the finest equipment ever to be sold in the Michigan area. The BEST and the CLEANEST!! EARLY HILITES: 8 SOIL REMEDIATION UNITS: Cedar Rapids 64LT, Cedar Rapids 64LT Primary Drum, Cedar Rapids 10ft. x 24ft. Williams Type Control House (tri), Cedar Rapids 24in. x 50in. PC1245 Portable Stacking, Cedar Rapids 26in. x 11ft. Single Shaft Reconstruction Mill, Cedar Rapids 64LT Filterhouse (tri), Cat 320KW Generator, Fruehauf 43ft. Tool Trailer (t/a), 7 HYDRAULIC EXCAVATORS: 2006-2005 Cat 320CL, 2012 Cat 316EL, 2012 Cat 312EL, Cat 312CL, 2010 Cat 307D, Komatsu PC300LC-6, 2 EXCAVATOR THUMBS: (2) New Tomahawk Thumb, ARTICULATED HAUL TRUCKS: Volvo A25C, 2 MOTOR GRADERS: Cat 160HVHP (scarifier), Cat 140G, 9 RUBBER TIRED LOADERS: Cat 966G, 2013 Cat 950K, 2005 Cat 928GZ, 2008 Cat 924H, Cat 950H, Cat 928H, 2011 Cat 908H, 2007 JD 544J, Kawasaki 90ZV, 8 CRAWLER TRACTORS: 2007 Cat D6KLGP, Cat D6R, 2012 Cat D6KLGP (cab), Cat D5MXL, Cat D5GXL, Cat D5GLGP, 2008 Cat D4KXL, 2012 Cat D3KXL, CRAWLER LOADER: Cat 973, 2 TRACTOR LOADER BACKHOES: 2006 Cat 430E (4x4), Cat 420E (4x4), ASPHALT ROLLER: 2008 Cat CB14, 2 RUBBER TRACKED SKID STEERS: 2012 Cat 289D, 2011 Cat 279C, 2 GENERATORS: Cat XQ75, 2006 Cat XQ60, SCREENING PLANT: 2007 Terex Findlay 790 , CONVEYORS & STACKERS: 2012 Irock M-8036, WOOD CHIPPER: Morbark 13, 2 LOG SKIDDERS: TimberJack 460, TimberJack 380A, 8 SNOW EQUIPMENT: Master Craft Welding SP-144WL 12ft. Snow Pusher, Master Craft Welding SP-120WL 10ft. Snow Pusher, Master Craft Welding SP-120SS 10ft. Snow Pusher, Master Craft Welding SP-96SS 8ft. Snow Pusher, Master Craft Welding SP-78SS 6ft. 6in. Snow Pusher, Master Craft Welding SP-72SS 6ft. Snow Pusher, SWEEPER: Tennant 7400, 2 HYDRO EXCAVATOR TRUCKS: (2) 2005 Int’l 7600, WATER TRUCK: 1992 Volvo (2600gal.), 2 DUMP TRUCKS: 2000-1999 Peterbilt 330 (tri.)., 3 TRUCK TRACTORS: 2000 Western Star 4964SX (tri.), Kenworth T800, Peterbilt 379 (t/a), WINCH TRUCK: 1998 Kenworth T800 (t/a), UTILITY TRUCK: 2001 Chevy 3500HD (diesel, s/a), 3 SERVICE TRUCKS: (2) 2011 Kenworth T270, 1999 Ford F450XLT (loaded), 3 PICKUPS: 2006 Chevy 2500HD (diesel), 2007 Chevy 1500, 2005 Chevy 1500, ENCLOSED TAGALONG TRAILER: 1996 Classic 14ft. x 7ft. (t/a), 2 PRESSURE WASHERS: (2) New Easy Kleen, ATTACHMENTS: Excavator: Pallari KH160 Stump Harvester Shear, Rubber Tired Loader: Cat HD Forks, Crawler: Fleco 1220in. Rake, Tractor Loader Backhoe: (3) Allied 24in. Plate Compactor, Skid Steer: (2) New Tomahawk 72in. Rock Bucket, (2) New Tomahawk 78in. Snow & Mulch Bucket, (2) New Tomahawk 72in. Smooth Bucket, (2) New Tomahawk 66in. Brush Grapple (1 cylinder), (2) New Tomahawk 66in. Smooth Bucket, (2) New Tomahawk 66in Grapple Bucket (1 cylinder), (2) New Tomahawk Stump Bucket, (6) New Tomahawk 42in. Fork Frame, (4) New Tomahawk HD Hay Spear, (10) New Tomahawk Quick Attach Mount Plate, NEW SUPPORT EQUIPMENT: New Reading 96in. - 49in. Aluminum Diamond Plate Tool Boxes, (4) New Mustang LF88 Plate Compactors, New Mustang ML80S Rammers, New Mustang M30 Core Drill, New Mustang MP3 3in. Water Pump, (3) New Mustang MP4800 2in. Submersible Pumps, (3) New Mustang CV3500 Concrete Vibrators, (12) New 3pc. 14in. Diamond Blades, (6) New 6 packs of 14in. Abrasive Blades, (6) New 4 packs of 10,000lb. Ratchet Cargo Straps, New 5 Ton Digital 4ft. x 4ft. Platform Scales, New Huskie 11218 SDS Hammer Drills, (4) New 1in. Drive Air Impact Wrenches, (4) New 1/2in. Drive Air Spray Gun Kits, (6) New 2in. x 50ft. Discharge Water Hoses, (4) New Stiff Neck Pintle Hitches.

Address: 6090 Starville Rd. Marine City, MI 48039-1021. DIRECTIONS: From MBS International Airport: Head northeast, left onto Garfield Road. Turn left onto West Freeland Road, and right onto M-84 South. Turn left on Kochwille Road. Site on left.

WED., NOVEMBER 5

DIRECTIONS: From Detro Metro Airport: I-94 E to 26 Mile Rd. in Macomb County. Take exit 248 for 26 Mile Rd. from I-94 E. Continue onto Marine City Hwy to right on Starville Rd. SITE PHONE: (262) 903-6269

THURS., NOVEMBER 6 @ 9:30 AM

ALEX

LYON & SON Sales Managers & Auctioneers, Inc.

Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY (Evenings) (315) 637-8912 www.lyonauction.com

Page 108 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

John Deere’s K-Series Delievers High Association Urges Productivity, Uptime, Low Operating Costs Officials to Act John Deere’s K-Series backhoe loaders — 310K EP, 310K, 310SK, 310SK TC, 315SK, 410K, 410K TC, 710K — build on the success of the popular J-Series. Two economical tractor loader models (210K EP, 210K) round out the K-Series and provide additional job site versatility. The KSeries models deliver productivity, uptime and lower daily operating costs that operators expect from John Deere equipment. “Our customers are a diverse group that use backhoe loaders and tractor loaders for a variety of applications on the job site,” said Louann Hausner, product marketing manager of backhoe loaders, John Deere Construction & Forestry. “The new K-Series provides North American contractors a variety of options that are powerful, versatile, productive and economical. John Deere is committed to matching the right machine to the right customer.” The K-Series meets today’s emission regulations. Powered by a certified IT4/ Stage III B John Deere PowerTech engine, the K-Series comes equipped with a five-speed transmission that allows top speeds of 25 mph when roading. An optional AutoShift transmission enables smooth shifting and improves operator comfort by reducing the number of times the transmission control lever (TCL) needs to be actuated during operation. A single loader lever with integrated electro-hydraulic (EH) auxiliary loader control eliminates the need for a second lever when using a multi-purpose bucket. In addition, a complete redesign of the cab ventilation now circulates cab air from front-to-back, directing airflow where operators need it the most. Enhancements also were made to John Deere’s total machine control (TMC) backhoes. Updates include a joystick redesign that gives operators even easier operation with equal lever efforts in all directions for smooth and productive operation as well as improved swing control that allows for more precise trench work with less backhoe wag. The K-Series includes many key features that increase machine uptime such as improved engine access and a cooling package design that allows each of the coolers to be separated for easy cleaning. To protect the machine on the job site, backhoe loaders with a sealed switch model (SSM) come stan-

dard with machine security. Differential lock protection can easily be enabled through the monitor and prevents potential damage from the rear differential lock being engaged at too high of speeds. In an effort to lower daily operating costs, John Deere is providing smart technology with auto idle, auto shutdown and keyless start. These three features come standard on all machines equipped with SSM. In addition, an economy mode setting provides a sweet spot for maximum productivity

strong visibility, ride control, limited slip front axles and a single lever for controlling a loader with auxiliary hydraulics, this tractor also is ideal for loading, according to the manufacturer. The new K-Series offers several customer favored features that carried forward from the J-Series. These include a multi-plate clutch engagement that allows for on-the-fly mechanical front wheel driver (MFWD) engagement; PowerShift transmission; deluxe lighting package that includes 10 adjustable work lights that enables customers to

JOBS from page 1

and Pennsylvania (10,800 jobs, 4.8 percent). Nevada (12.8 percent, 7,200 jobs) added the highest percentage of new construction jobs during the past year, followed by Florida, Utah (11.4 percent, 8,400 jobs), Delaware (10.7 percent, 2,100 jobs) and North Dakota (9.4 percent, 3,200 jobs). Twelve states and the District of Columbia shed construction jobs during the past twelve months, with construction employment unchanged in Idaho and New Hampshire. New Jersey lost the highest percentage and total, (minus 8.1 percent, minus 11,300 jobs). Other states that lost a high percentage of jobs include Mississippi (minus 7.1 percent, minus 3,700 jobs), West Virginia (minus 5.3 percent, minus 1,800 jobs) and Arizona (minus 4.4 percent, minus 5,400 jobs). Besides New Jersey, other states that lost the most construction jobs between August 2013 and August 2014 included Arizona, Mississippi and West Virginia.

“Labor shortages are likely to become more severe without a better pipeline for preparing new workers.” Stephen E. Sandherr Associated General Contractors of America

The 210K EP and 310K EP are two new models designed specifically for rental and large contractor customers that need reliable, easy to use power.

and optimal fuel savings. An electronically controlled, variable-speed cooling fan, controlled by an electronic clutch will reduce horsepower draw on the engine for quieter operation and improved fuel economy. The 210K EP and 310K EP are two new models designed specifically for rental and large contractor customers that need reliable, easy to use power. The EP models provide a 70 hp engine with ITIV power without needing any aftertreatment technology. This eliminates the need for additional operator training or extra monitoring of machines that have numerous operators focused primarily on quickly getting on and off a machine to get a job done. In addition to the backhoe loaders, the 210K EP and 210K tractor loaders offer seat rotation, dual-tilt rear cylinders and tilt steering and are ideal for paving and grading applications. With

work longer and safely before sunrise and sunset; exclusive multi-language digital monitor for on-board diagnostics, calibrations and machine information; and same side, ground level daily service for easy maintenance checks. For those fleet managers, owners or operators looking to get the most out of their equipment, a standard three-year subscription of JDLink continuously collects and transmits machine data for machine management. The system enables timely preventive maintenance and remote diagnostics, as well as the coordination of machines working on multiple job sites to get the right machine to the right place at the right time. For more information, visit www.JohnDeere.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Twenty-eight states added construction jobs between July and August. California (13,600 jobs, 2.1 percent) added the most jobs, followed by Texas (6,900 jobs, 1.1 percent), Florida (6,100 jobs, 1.5 percent) and Minnesota (2,500 jobs, 2.3 percent). Nebraska (4.0 percent, 1,800 jobs) had the highest percentage increase for the month, followed by Maine (3.4 percent, 900 jobs), North Dakota (3.3 percent, 1,200 jobs) and Alaska (3.2 percent, 500 jobs). Twenty-one states and the District of Columbia lost construction jobs for the month, while construction employment was unchanged in Arizona. Ohio (minus 3,500 jobs, minus 1.9 percent) lost the most construction jobs between July and August. Other states experiencing large monthly declines in total construction employment included Pennsylvania (minus 3,000 jobs, minus 1.2 percent), New York (minus 2,700 jobs, minus 0.8 percent) and New Jersey (minus 1,600 jobs, minus 1.2 percent). South Dakota (minus 4.1 percent, minus 900 jobs) experienced the highest monthly percentage decline, followed by Mississippi (minus 2.4 percent, minus 1,200 jobs), Idaho (minus 2.3 percent, minus 800 jobs) and Ohio. Association officials said the employment gains were welcome news, but continued to urge elected and appointment officials to act on the measures outlined in the association’s workforce development plan. “Labor shortages are likely to become more severe without a better pipeline for preparing new workers,” said Stephen E. Sandherr, the association’s chief executive officer. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 109

ONE OWNER AUCTIONS

(16) DOZERS, (15) EXCAVATORS, PIPELINE, OILFIELD, TRUCKS, LOWBOYS, MORE BOOTH ENVIRONMENTAL - NOVEMBER 5 - WILBURTON, OKLAHOMA

Backhoes (4) Caterpillar 420 Backhoes Compactors 1996 Bomag BW213PDB Compactor 2007 Sakai SV510T-II Compactor 2001 Caterpillar CS-563D Compactor Cranes 2001 Terex RT230 Rough Terrain Crane Terex CD225 Rough Terrain Crane

Dozers (3) 2007 - 2002 Caterpillar D6R Dozers 2002 Caterpillar D6M XL Dozer 2000 Caterpillar D8R Dozer Mulcher 2009 Terex PT100 RT w/Tushogg Mulch Head Loaders 2005 Komatsu WA320 Wheel Loader (2) 2002 Caterpillar 246 Skid Steer Loaders

Grader 2006 Caterpillar 140H Grader Excavators 2010 Caterpillar 320DL Excavator 2006 Caterpillar 320CL Excavator 2002 Cat 320CL + Wacker G85 Aux Power 2007 Caterpillar 324DL Excavator 2007 Caterpillar 325CL Excavator 2006 Caterpillar 315CL Excavator

Articulated Truck 2002 Caterpillar 725 Articulated Truck Forklift & Kershaw Cutter 2008 Caterpillar TL642 Forklift Kershaw Klearway 800 Right of Way Mower AND over 200 More items - Dump Trucks, Haul Trucks, Lowboys, Goosenecks, Loader Tractors, Hammers, Gen Sets, Welders, Pipeline Equip, Pickups...

Dozers & Siidebooms 2001 Cat D6R Dozer, Winch, S#5LN02995 2002 Cat D6M XL Dozer, Winch, S#3WN02827 2002 CatD5M XL Dozer, S#3CR01985 1994 Cat D6H XL Dozer, Winch, S#9LK00489 (6) Caterpillar Sidebooms & Tack Tractors

Excavators 2006 Cat 325DL Excavator, S#PAL00262 (3) 2007 & 2006 Cat 320CL Excavators 2007 Komatsu PC200LC7 Excavator, S#C60767 2006 JohnDeere 200C LC Excavator, S# 505780 1997 Samsung SE210LC Excavator, S#FCY0195

Mud Mixer 2000 Tulsa Rig Iron Mud Mixer Forklift 2003 Gehl DL10H-55 Telescopic Forklift Trenchers Tesmec TRS1000 Rock Saw/Trencher, S#220

Barber Green Bucket Ditcher, S#TA-30X176 More… Water Trucks, Haul Trucks, Pickups, Lowboys, Athey Wagon, Rolligon Style Trailer, (5) Welders, (5) I-R Compressors, (6) Hydraulic Hammers & More

A R K L A H O M A P I P E L I N E - N O V E M B E R 11 - V A N B U R E N , A R K A N S A S

BLACKMON AUCTIONS, INC. www . bl a ck m o na u ction s . co m Established in 1938

PO Box 7464, Little Rock, AR 72217

501-352-4703

What’s going on in YOUR COMPANY

We want to know! I.R.A.Y. Companies is pleased to offer professional appraisal services. Our Certified Appraisal Services are laddered and can be customized to suit your individual needs. • Formal Appraisal: We fully inspect the equipment and provide a certified, professionally prepared document including pictures, serial numbers, and descriptions. The following non-certified options give you a market price at a valued rate. • Fax or E-mail Appraisal: You submit details of the equipment and we fax or e-mail you an appraisal report. • Desktop Appraisal: This appraisal is based on our phone conversation. No written appraisal is provided, only a value! Desktop appraisals start as low as $25 per unit! Call today for a free appraisal quote!

877-968-7230 www.iraymn.com

Give us a call.

Construction Equipment Guide

(800) 523-2200 OR

7 1/.3 .% /"%&1 &1*", *'3 7 "1#"(& 14$+2 7 "*.3&.".$& 14$+2 &)*$,&2 7 42&2 '1/- 3)& &0"13-&.3 /' 1".20/13"3*/.

7 *1& 14$+2 ".% -#4,".$&2 7 /,*$& &0"13-&.3 &)*$,&2 7 /#*,& 1".& /1+,*'32 7 *((&1 &11*$+2 /( /"%&12

FAX:

(215) 885-2910

/1 '413)&1 *.'/1-"3*/. 0,&"2& 5*2*3 42 /. 3)& 6&# "3 666 -*&%&-""4$3*/.&&1*.( $/-

666 )*,$/*.% $/-

Page 110 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com AIR EQUIPMENT RENTAL CORP ......................................................22 ALEX LYON & SON INC RACINE WI / COLUMBUS OH ..................................................99 SAGINAW MI / PORT HURON MI ..........................................107 ALEX PARIS CONTRACTING CO INC ................................................9 ALLIED CONSTRUCTION PRODUCTS ............................................83 ALLU GROUP ....................................................................................62 AMERICAN STATE EQUIPMENT ........................................................7 ARING EQUIPMENT CO INC ............................................................17 ARTIC SNOW & ICE CONTROL ........................................................38 ASC CONSTRUCTION EQUIP USA ........................................10,11,31 ASPEN EQUIPMENT ..........................................................................37 BANDIT INDUSTRIES INC ................................................................82 BARGAINS ....................................................................................95,96 BLACKMON AUCTIONS INC WILBURTON OK / VAN BUREN AR ........................................109 BOSS PRODUCTS ............................................................................38 CATERPILLAR INDUSTRIAL ..............................................................80 CEG SCALE MODELS........................................................................26 CK POWER ........................................................................................31 CLASSIFIEDS ....................................................................................94 CLEARSPAN FABRIC STRUCTURES ..............................................33 CONSTRUCTION EQUIPMENT GUIDE CRAWLER LOADER PROMO ..................................................32 FLORIDA AUCTION PROMO ....................................................74 TARGETED EMAIL ....................................................................42 WANTED ....................................................................................97 AUCTION RESULTS ................................................................100 DARELL DUNKELL & ASSOC AUCTION HARRISON MI..........................................................................103 DON SMOCK AUCTIONEERS ROCKFORD IL ........................................................................104 DOOSAN INFRACORE AMERICA CORP ..........................................66 DOOSAN PORTABLE POWER ..........................................................75 DOPPSTADT ......................................................................................88 DYNAPAC............................................................................................69 ERB EQUIPMENT ..............................................................................15 FABCO EQUIPMENT INC ....................................................................2 FARM-RITE EQUIPMENT INC............................................................13 FELLING TRAILERS ..........................................................................54 FINKBINER EQUIPMENT CO ..............................................................7 FLANGE LOCK ..................................................................................23 FLUID CONTROL SERVICES ............................................................33 FOLEY EQUIPMENT CO ....................................................................29 FURY MOTORS ..................................................................................53 GARY CARLSON EQUIPMENT..........................................................30 GEITH..................................................................................................63 GROVE WORLDWIDE ........................................................................70 HILCO INDUSTRIAL LLC DETROIT MI ............................................................................109 HINIKER NORTHEAST ......................................................................39 HOWELL TRACTOR & EQUIPMENT CO ........................................112 HYDRAULICIRCUIT TECHNOLOGY..................................................62 ILLINOIS TRUCK & EQUIPMENT ........................................................3 IRAY AUCTION..................................................................................109 IROCK CRUSHERS ............................................................................86

IRONPLANET....................................................................................105 JEFF BELZERS CHEVROLET ......................................................50,51 JOB RENTALS AND SALES LLC ......................................................31 JOHN DEERE ....................................................................................71 KAWASAKI CONSTRUCTION MACHINERY......................................43 KLEEMAN............................................................................................87 KOBELCO CONST MACHINERY ......................................................19 KOMATSU AMERICA CORP ..............................................................72 KPI-JCI ................................................................................................90 KUBOTA ..............................................................................................65 LEADING EDGE ATTACHMENTS INC ..............................................60 MATEJCEK IMPLEMENT....................................................................14 MCCANN INDUSTRIES INC ................................................................6 METSO MINERAL CRUSHING ..........................................................79 METSO MINERAL SCREENING ........................................................92 MEYER PRODUCTS LLC ..............................................................40,41 MID COUNTRY MACHINERY ............................................................56 MIDWEST READY MIX & EQUIPMENT ............................................20 MONTABERT ......................................................................................61 MUSTANG MFG ..................................................................................68 NITKE SALES INC WAUSAU, WI............................................................................104 NORAM ..............................................................................................44 NORTRAX-MIDWEST ....................................................................23,27 PEMBERTON INC ..............................................................................60 POWERSCREEN CRUSHING & SCREENING ..................................85 POWERSCREEN MW DEALER ........................................................93 PURPLE WAVE INC..........................................................................103 RANSOME EQUIPMENT SALES LLC................................................97 RDO EQUIPMENT/SCHARBER EQUIPMENT ..................................57 RITCHIE BROS AUCTIONEERS ......................................................111 ROAD BUILDERS MACHINERY....................................................21,62 ROGERS BROTHERS CORP ............................................................52 ROLAND MACHINERY INC ..................................................................5 SCHAEFER ENTERPRISES ..............................................................60 SENNEBOGEN ..................................................................................91 SMITHCO ............................................................................................52 STAR EQUIPMENT LTD ......................................................................6 SUPERIOR INDUSTRIES ..................................................................84 TEREX CRANES ................................................................................64 TEREX FUCHS ..................................................................................89 TITAN RENTS ....................................................................................22 TOWMASTER INC ..............................................................................49 WILSON EQUIPMENT ........................................................................28 YODER & FREY AUCTIONEERS BERLIN OH / DARLINGTON PA ..............................................101 ZIPS TRUCK EQUIPMENT ................................................................50 OHIO STATE SUPPLEMENT BOBCAT ENTERPRISES......................................................................5 COLUMBUS EQUIPMENT CO ............................................................8 EQUIPMENT CORP OF AMERICA ......................................................5 JCB OF OHIO........................................................................................7 MURPHY TRACTOR & EQUIPMENT CO ............................................2 RUDD EQUIPMENT ..............................................................................3 THE MCLEAN CO ..............................................................................4,6

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 11, 2014 • Page 111

Unreserved public auctions

31,3

items

Heavy construction and trucks

CA ATERPILLAR D8R SERIES II – WILLISTON, ND – NOV 20

2011 CA ATERPILLAR TERPILLAR R D6T XW HOUSTON, TX – NOV 12–13

2008 TEREX RT665 65 TON HOUSTON, TX – NOV 12–13

2006 CA ATERPILLAR 627G – WILLISTON, ND – NOV 20

J JOHN DEERE 770BH HOBBS, NM – OCTT 30

2014 KOMATSU PC360LC C-10 WESSINGTON SPRINGS, SD – OCT 23

2012 KO OMATSU WA470-6 – WILLISTON, ND – NOV 20

2007 NORAM 65E – CHAMP PAIGN, IL – NO OV 11

2010 KOMATSU D65EX-15E 5 O WESSINGTON SPRINGS, SD – OCT 23

2 – 2013 CA ATERPILLAR 930K CHAMP PAIGN, ILL – NOV 11

2007 CA ATERPILLAR TERPILLAR 321CL CR CHAMP PAIGN, ILL – NOV 11

FFeatured eatured u upcoming pcoming auctions auctions

FFeatured eatured it items ems in Nor North th America America

Bid w with ith cconfidence onfidence

Verona, V erona, KY KY C Chehalis, hehalis, WA WA W Wessington essington Springs, Spring gs, SD Ho Hobbs, bbs, NM C Champaign, hampaign, IL Hou Houston, ston, TX New Br Braunfels, aunfels, TX Williston, W illiston, ND

525+ excavators excavators 295+ crawler crawler tractors tractors 305+ wheel loaders loaders 130+ mot motor or graders graders 225+ lo loader ader backhoes backhoes 250+ sskid kid ssteer teer lo loaders aders 115+ ar articulated ticulated du dump mp ttrucks rucks 125+ cra cranes nes 65+ mini e excavators xcavators and much much more... more...

▸ No minimu minimum mb bids ids or rreserve eservve prices prices ▸ Up tto o 100% fin financing ancing available available ▸ Ins Inspect pect and b bid id in per person son or on online line

Oct October ober 116 6 Oct October ober 22 Oct October ober 2 23 3 Oct October ober 30 No November vember 11 No November vember 12–13 12–13 November November 14 14 No November vember 20

rbauction.com rb auction.com | 1.800.2 1.800.211.3983 11.3983 Kevin Kevin L. Perry Perry #RP 2607, Au Auctioneer, ctioneer, Auction Auction Company Company License # 1981/ Motor Motor VVehicle ehicle Dealer Dealer License #1539, Au Auction ction Firm License # 444.000193/ Au Auctioneer ctioneer Gr Greg eg M. Highsmit Highsmithh # 441.000865, Auctioneer Auctioneer James L. Va Valentine alentine # 15239, Auctioneer Auctioneer Greg Greg M. Highsmith Highsmith # 13285, Ritchie Ritchie Bros. Bros. Au Auctioneers ctioneers (Americ (America) a) Inc. Inc. Au Auction ction Clerk Clerk License #225/ Auctioneer Auctioneer Frederick Frederick R. Vilsmeier Vilsmeier # 996 *O *OAC. AC. TTerms erms and conditions conditions apply. applyy.

Selll y Sel your our equipment Call C all today–any today–any nu number mber of items items accepted. accepted.

More it More items ems added d daily aily Visitt rb Visi rbauction.com auction.com tto o see al alll auctions and u up-to-date p-to-date li listings. stings.

Page 112 • October 11, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE