Midwest 26 2014 by Construction Equipment Guide

Published Nationally

$3.00

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

Midwest Edition

www.constructionequipmentguide.com

December 20, 2014 • Vol. IXX • No. 26 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910

Inside

Crews Wrap Up Phase One of Alum Creek Job By Lori Tobias CEG CORRESPONDENT

Olson Orders First Ever Pink Trench Box...12

Right on schedule, workers are putting the final touches on a Columbus, Ohio, project that sat on a shelf untouched for 10 years. The Alum Creek Drive

ities, multi-use trails for pedestrians and bicyclists, Americans with Disabilities Act-compliant curb ramps, improved mast-arm signals, street lighting and landscaping. The project was long overdue, said Jim Miller, area engineer of the city of

The Alum Creek Drive improvement project started in 2012 and involved expanding the two-lane highway between Williams Road and State Route 104 to five lanes, as well as adding curbs, a storm system, gutters, drainage facilities, multi-use trails for pedestrians and bicyclists, Americans with Disabilities Act-compliant curb ramps, improved mast-arm signals, street lighting and landscaping. Ziegler CAT Attr acts Bidders to Minn. Sale...96

More Th an 2,85 0 Attend Rit chie Sa le. ..98

Table of Contents ................4 Mini & Compact Equipment Section ..........................46-69 Snow & Ice Section ......70-72 Paving Section ..............79-87 Auction Section..........92-101 Business Calendar ............93 Advertisers Index ............102

improvement project started in 2012 and involved expanding the two-lane highway between Williams Road and State Route 104 to five lanes, as well as adding curbs, a storm system, gutters, drainage facil-

Columbus. “That roadway not only had a lot of daily traffic, but lots of commercial traffic,” he said. “Lots and lots of shipping and trucks. Just major equipment up and down that road every day.

The current ADT is about 30,000 cars a day, and 60 percent of those are commercial vehicles. Mostly semis.” The $18 million project was designed 12 years ago, but sat unfunded until 2012

when money became available from the Federal Transportation Fund. Local contractor George J. Igel & Co., Inc. won the bid. The project came with plenty of challenges, not

the least of which was maintaining traffic during construction. Local neighborhood traffic had to be accommodated and utilities moved. “The schedule, even see ALUM page 78

Industry Spending Has Far-Reaching Benefits Two-thirds of the economic benefits and jobs created by federal highway and transit investment occur in non-construction sectors, according to a new analysis from IHS Inc., a leading global source of

critical information and insight. The study also finds that every dollar invested through the federal Highway Trust Fund (HTF) in state highway, bridge and public transit infrastructure programs returns 74

cents in tax revenue. The report, “Transportation Infrastructure Investment: Macroeconomic and Industry Contribution of Federal Highway and Mass Transit Program,”

reveals that 70 percent of the economic benefits, or value-added, of federal HTF investments in transportation improvements occur in non-construction sectors of the see IHS page 100

Government to Deliver Early Holiday Present? The U.S. House of Representatives passed late Wednesday, Dec. 3, the Tax Increase Prevention Act. Among the 50 expired tax breaks the bill would extend is a reinstatement of the 50 percent depreciation bonus for 2014 and an increase of the Section 179 expensing levels this year to $500,000 with a $2 million

phase-out cap. Both of these tax breaks expired Dec. 31, 2013. At press time, the Senate was expected to take up and pass the bill some time by Dec. 21, which would then go to the president to sign. In addition to affecting equipment purchases made in 2014 retroactively, this bill would in effect create a

window for last-minute purchases made prior to Dec. 31, 2014, to be included. Visit www.constructionequipmentguide.com for continuing updates on this measure. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Page 2 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

PROVIDING THE BEST IN

USED EQUIPMENT 1969 Cat 950 ..........................................$22,500

2004 Cat D6R..........................................$81,000

1999 Volvo L70C....................................$39,500

1977 Cat D6D ........................................$33,500

S/N 81J01752, 11,630 Hrs, EROPS, tires fair, 3yd bucket, brakes need work

S/N ADE00479, 11,088 Hrs, EROPS, S Blade, Undercarriage on Run Out, Drawbar

S/N V15854, Hrs Unknown, Meter Reads 7517, EROPS, Bucket, Tires Good, Hyd Coupler

S/N 04X01418, unknown Hrs, OROPS, angle blade manual, twin tilt cyls, undercarriage fair, draw bar, sweeps

2004 Volvo L60E....................................$59,500

2006 Kobelco SK480 ............................$65,000

2006 Cat 966H ....................................$179,500

2011 Cat 262C........................................$33,000

S/N V60363, hours unknown, EROPS, bucket, lug tires fair, hyd coupler

S/N YS06U0571, 9187 Hrs, EROPS, LongStick, Bucket, Undercarriage Fair

S/N A6G00225, 8535 Hrs, EROPS, A/C, GP-bkt, tires good, engine rebuilt at 7422 hours

S/N MST03900, 2520 Hrs, EROPS, A/C, Hyd Quick Coupler, 2-Speed, Bkt, Tires Fair

2003 Hitachi ZX600LC........................$110,000

2011 Cat 966K4....................................$225,000

1990 Cat D4H ........................................$33,500

1999 Cat D6M LGP ..............................$69,000

S/N 004015, 10,484 Hrs, EROPS, Undercarriage Fair, Coupler, Bkt

S/N TFS00170, 11,515 Hrs, Bucket, Tires Good, EROPS, A/C, Auto Lube

S/N 9DB01955, 8345 Hrs, OROPS, undercarriage good, rebuilt trans, drawbar, PAT blade

S/N 2RN00542, 10,370 Hrs, EROPS, PAT blade, winch, rear screen, under carriage good

1998 CAT D3C LGIII ............................$24,500

1993 Ingersoll Rand ST105 ..................$6,500

2008 Cat 297C XPS ..............................$32,500

2004 Cat D6RLGP DSII ........................$81,000

S/N 7XL01390, unknown Hrs, OROPS, PAT blade, undercarriage good to fair, paint good

S/N 5137, 5169 hours, no ROPS, runs good, drums good

S/N GCP00782, 5370 Hrs, EROPS, A/C, High Flow, Bkt, 2-Speed, Self-Leveling, Tracks Good, New Drive Motor at 5365 Hrs

S/N ADE00479, 11,090 Hrs, EROPS, A/C, S Blade, Drawbar, Undercarriage On Run Out

Contact: Jeff Speer

FABCO Equipment Inc. 11200 W. Silver Spring Rd., Milwaukee, WI 53225

800.353.1944 ... For Used Equipment 877.754.4477.... For Used Work Tools & Attachments 414.461.9100 ... In WI and Upper Michigan

www.FABCO.com Hundred of machines. Listings updated daily.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 3

Page 4 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWEST EDITION

IN THIS ISSUE 12

Circulated Throughout

Founder, Publisher & CEO Midwest Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Main office

To read these stories and many more, visit www.constructionequipmentguide.com

SPECIAL SECTION 46 MINI & COMPACT EQUIPMENT Be sure to check out this special section! Keep up to date with the latest information on mini and compact equipment.

40 LAKE PANORAMA UPGRADES TO DSC BARRACUDA CLASS DREDGE Since 1999, the Lake Panorama Rural Improvement Zone and Lake Panorama Association have partnered to use a DSC Barracuda Class dredge to maintain the depth and health of the lake.

74 POWER SHOW OHIO 2015 TO FEATURE NEW

FEATURES 8

JCB’S JOHN PATTERSON ELECTED 2015 CHAIR OF THE AEM John Patterson, chairman of JCB USA Group, director of the JCB Group and former CEO of JCB North America, has been elected 2015 chair of the Association of Equipment Manufacturers (AEM).

12 PAL3 612 TRENCH BOX HELPS OLSON ‘KEEP YOUR SEWER IN PINK’ In keeping true to its slogan, “Keep Your Sewer in the Pink,” Olson’s Sewer Service of Forest Lake, Minn., has gone one step beyond and taken delivery of the first ever trench box painted Olson’s signature hot pink to match the company’s vehicles.

16 LIEBHERR CONSTRUCTION OPENS WESTERN U.S. SPARE PARTS DEPOT Liebherr Construction Equipment Co. announced the opening of a new spare parts facility located in Visalia, Calif. The new depot is expected to begin operations in early 2015.

20 S.D. HOMEBUILDER TAKES CONTROL OF RESIDENTIAL EXCAVATION Daene Boomsma first built his name as a homebuilder. His construction company, Boom Construction, thrives in Rapid City, S. D., due to his attention to detail and one-on-one relationship with each of his customers. But in order to build a house, you’ve first got to dig a hole — and Boomsma took matters into his own hands to ensure his homes were built to his quality expectations.

26 IED INSTALLS NEW OFFICERS Newly elected president Tom Smith opened Illinois Equipment Distributors’s 48th Annual IED Christmas Reception and Installation of Officers on Dec. 5 at the Seven Bridges Country Club in Woodridge, Ill.

LAYOUT, MORE CONVENIENT DATES

Web site Editorial e-mail Advertising e-mail For advertising rates Contact

94 ARTBA FORECASTS MODEST CONSTRUCTION GROWTH FOR 2015 The U.S. transportation construction market will grow 3.1 percent from $185.9 billion in 2014 to $191.7 billion in 2015, according to a forecast released Dec. 3 by American Road & Transportation Builders Association (ARTBA) Chief Economist Alison Premo Black.

96 ZIELGER CAT HOSTS ANOTHER SUCCESSFUL

98 MORE THAN 2,850 ATTEND RITCHIE BROS.

EQUIPMENT 79 HAMM HD+ Series Rollers 80 WIRTGEN Autopilot Stringless Paving 82 GOMACO Commander III Slipform Paver

DEPARTMENTS

MATERIAL SERVICE AFTER OVER 40 YEARS

88 CLASSIFIEDS 92 COMING AUCTIONS 93 BUSINESS CALENDAR

Joseph S. McKeon • Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

Kent Hogeboom National Sales Manager 315/866-1423 800/988-1203 315/866-1379 e-mail khogeboom@cegltd.coom

Toll Free Fax

Contact

Ed Bryden • Central and Eastern Indiana • Michigan • Ohio • Kentucky

440/268-9690 800/810-7640 440/268-9691 e-mail ebryden@cegltd.com

Toll Free Fax

Contact

Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota • South Dakota

952/353-1770 866/413-4265 952/353-2750 e-mail pkiel@cegltd.com

Toll Free Fax

CHICAGO AUCTION Bidders came from more than 50 countries, including 48 U.S. states. Online bidders purchased 43 percent of the equipment sold (by dollar value).

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com

773/769-4090 800/632-0233 773/769-4280 e-mail jmckeon@cegltd.com

MINNEAPOLIS AUCTION On Dec. 19, Ziegler CAT hosted a sale at its facility in Minneapolis, Minn. Available for bidding were articulated trucks, backhoe loaders, compact track and multi-terrain loaders, compactors, excavators, skid steer loaders, telehandlers, dozers, wheel loaders and more.

Edwin M. McKeon Sr. Joseph S. McKeon Craig Mongeau Christine Wolkin Pete Sigmund John Pinkerton Tom Weinmann Cathy Printz

Toll Free Fax

Big changes are on tap for the 45th edition of Power Show Ohio — big changes to remember. This year’s show begins Jan. 29, and continues through the 31st at the Ohio Expo Center in Columbus, Ohio.

30 MIKE STANCZAK TO RETIRE FROM HANSON After more than 40 years of dedicated service with Lehigh Hanson and its predecessor companies, Michael “Mike” Stanczak Sr. vice president and general manager of the Midwest Materials area in the north region, has decided to retire at the end of the year.

Toll Free Fax

• North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

Mobile

Facebook

Twitter

YouTube

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2014, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 5

Quality Used Equipment...with support to back it up

Komatsu PC360LC-10, ’14, 14,655 hrs..$269,500

Power Curber 5700C, ’07, 2,874 hrs........$69,500

DOZERS

MATERIAL HANDLERS

COMPACTION

CRUSHING/SCREENING

Cat D6N, ’07, 11,785 hrs..........................$62,500 Komatsu D51PX-22, ’08, 4,013 hrs ......$124,500 Komatsu D61PX-15EO, ‘07, 4,771 hrs ..$120,000 Komatsu D65EX-15, ’06, 2,301 hrs........$144,500 Komatsu D65EX-15EO, ’07, 3,934 hrs ..$149,500 Komatsu D65PX-15EO, 08, 8,504 hrs......$79,500 Komatsu D155AX-6, ’07, 6,524 hrs ......$239,500 Komatsu D275AX-5, ’03, 23,015 hrs ......$99,500

Cat 365CL-MH, ‘08, 10,428 hrs ............$154,500

Bomag BC61RB, ’00, 15,862 hrs ............$54,900

Kleemann MSD190D Screen, ’13, 688 hrs ............

Gehl RS8-42, ’03, 3,594 hrs ....................$37,500

Bomag BC1172RB, ’05, 15,531 hrs ........$94,900

................................................................$255,000

Komatsu P400LC-8MH, ’08, 6,095 hrs ..$219,500

Bomag BW205AD, ’02, 3,520 hrs ............$26,500

Kleemann MC110Z Crusher, ’13, 714 hrs..............

MILLING

Hamm HD14VV, ’09, 2,460 hrs ................$29,500

................................................................$475,000

Roadtec RX700, ’08, 4,630 hrs..............$170,000

I-R DD24, ’99, 8,421 hrs ..........................$12,500

EXCAVATORS

Wirtgen W60, ’08, 628 hrs ....................$144,900

Volvo DD90HF, ’09, 638 hrs ....................$59,500

Cat 330CL, ’02, 12,032 hrs ......................$69,500

GRADERS

Wirtgen W600, ’03, 2,403 hrs..................$77,500

FORESTRY

PAVING Blaw-Knox PF115, ’08, 1,921 hrs ............$14,500

Norco Puma 220, ’11, 78 hrs ....................$CALL Ponsse Cobra HS10, ’98, 20,013 hrs ......$75,000 Ponsse Ergo, ’07, 9,250 hrs ..................$225,000 Valmet 415EX/Rolly II, ’05, 10,092 hrs $135,000 Valmet 860.4, ’12, 1,640 hrs......................$CALL

Hamm HD90 Ozzy, ’04, 4,300 hrs ............$36,500

Wirtgen W60 Rumbler, ’11, 400 hrs......$240,000 Wirtgen W2100, ’04, 8,373 hrs ..................$CALL

Komatsu GD655-3C, ’06, 1,866 hrs ......$159,500 Komatsu GD655-3EO, ’09, 1,474 hrs ....$169,500

V I S I T

Power Curber 5700C, ’07, 2,874 hrs ......$69,500 Vogele 1110WB, ’03, 1,004 hrs ..............$85,000 Vogele 5103-2, ’11, 1,273 hrs ..............$250,000 Vogele 5203-2, ’09, 2,727 hrs ..............$195,000 Vogele Super 700, ’07, 566 hrs ..............$79,500

WHEEL LOADERS

Cat 345BL, ’03, 10,750 hrs ......................$72,500 Deere 350DL, ’07, 6,752 hrs..................$124,500

Komatsu WA70-5, ‘06, 2,592 hrs ............$47,500

Deere 350DLC, ’07, 5,837 hrs ..............$124,500

Komatsu WA250-6, ’11, 5,646 hrs ..........$94,500

Deere 350DLC, ’07, 6,832 hrs ..............$115,000

Komatsu WA250-6 High Lift, ’11, 2,086 hrs ..........

Komatsu PC35MR-2, ‘07, 4,747 hrs ........$26,500

................................................................$124,500

Komatsu PC88MR-8, ‘09, 1,195 hrs ........$74,500

Komatsu WA320-7, ’13, 462 hrs............$174,500

Komatsu PC138USLC-8, ’11, 1,142 hrs $124,500

Komatsu WA320-7, ’14, 81 hrs..............$165,000

Komatsu PC138USLC-8, ’11, 3,218 hrs $104,500

Komatsu WA380-6, ’11, 2,094 hrs ........$179,500 Komatsu WA380-7, ’13, 1,385 hrs ........$185,000 Komatsu WA430-6, ’07, 4,404 hrs ........$129,900

SCRAPERS

WATER EQUIPMENT

Komatsu WA450-6, ’07, 8,069 hrs ........$149,500

Deere 762, ’76, 2,911 hrs ........................$21,000 Deere 762, ’78, 5,743 hrs ........................$21,000

Komatsu HM300-2, ’06, 6,500 gal ........$275,000

Komatsu WA500-3, ’98, 11,556 hrs ........$79,500

Komatsu HM400-2, ’07, 8,000 gal ........$395,000

Terex TL300-2, ’08, 2,441 hrs..................$79,500

Komatsu PC160LC-7, ’05, 8,230 hrs........$54,500 Komatsu PC200LC-6, ’95, 11,780 hrs......$34,500 Komatsu PC200LC-6, ’01, 5,824 hrs........$59,500 Komatsu PC200LC-7, ‘03, 8,114 hrs........$79,500 Komatsu PC200LC-7, ’04, 7,640 Hrs ......$89,500 Komatsu PC210LC-10, ’12, 855 hrs ......$157,500 Komatsu PC220LC-6, ’96, 6,510 hrs........$64,500 Komatsu PC220LC-8, ’06, 9,084 hrs........$96,500 Komatsu PC220LC-8, ’06, 2,606 hrs......$139,500 Komatsu PC220LC-8, ’07, 5,757 hrs......$119,500 Komatsu PC220LC-8, ’09, 4,707 hrs......$129,000 Komatsu PC228USLC-1, ’99, 4,400 hrs ..$54,500 Komatsu PC300LC-7EO, ’06, 7,736 hrs $110,000 Komatsu PC300LC-7EO, ’07, 4,714 hrs $157,500 Komatsu PC360LC-10, ’14, 655 hrs ......$269,500 Komatsu PC400LC-7, ’05 11,134 hrs ......$92,500 Komatsu PC450LC-8, ’11, 2,389 hrs......$309,500 Komatsu PC600LC-7, ’05, 10,328 hrs....$199,500 Komatsu PC600LC-7, ’05, 4,910 hrs......$369,500

Komatsu PC400LC-8MH, ’08, 6,095 hrs ............$219,500

Komatsu WA500-3, ’98, 11,556 hrs ................$79,500

Komatsu PC600LC-8, ’06, 10,478 hrs....$199,500 Komatsu PC750LC-7, ’04, 6,613 hrs......$349,500

Financing Available for Qualified Buyers

15 Roland Branch Locations in IL, IN, MI, MO, and WI

Call Jay Germann (217) 789-7711 • Email: jgermann@rolandmachinery.com

R O L A N D M A C H I N E R Y . C O M

Page 6 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke • (630) 739-7770

Excavator Rental Specials Bolingbrook, IL

Serving the Constructor ®

View our complete Used & “Like New” inventory at McCannOnline.com

Clean, reliable equipment

Competitive rates

Rent by the day, week, or month

Illinois

Delivered to your job site

Addison 630-627-0000 Bolingbrook* 630-739-7770

2012 Case 850L, s/n NCD80092, 700 Hrs, 2011 Case 580SN, s/n JJGN58SNKAC536021, Cab w/Heat & AC, 124” Blade, 24” Grousers 2480 Hrs, Cab w/Heat & AC, Ext-Hoe, Ride ......................................................$110,000 Control, Two Lever, 4 in 1 Bkt, Aux Hyds, 12” and 24” Bkts....................................$59,900

2012 Case SR250, s/n 2012 Case SV250, s/n JAFSV250JBM435496, 100 Hrs, Cab w/Heat JAFSR50VBM434310, 750 Hrs, Cab w/Heat & AC, Two Speed, Hyd Coupler, 78” Bkt, 33 & AC, Blc High-Flow, 12 x 16.5 Tires, 72” Bkt x 15.5 Tires ....................................$43,500 ........................................................$39,500

Chicago 312-942-9200 Crestwood 708-597-3110

CX130 Excavator

CX160 Excavator

CX210 Excavator

CX225 Excavator

MC r h EJH EFQUI $410/Day, $1,230/Week, $3,690/Month

MC r h EJH EFQUI $475/Day, $1,425/Week, $4,275/Month

MC r h EJH EFQUI $580/Day, $1,740/Week, $5,220/Month

MC r h EJH EFQUI $755/ Day, $2,265/Week, $6,795/Month

McHenry* 815-385-0420

Rent Today!

Wauconda 847-526-9444 2013 Case SV250, s/n JAFSV250PCM460705, 950 Hrs, Cab w/Heat & AC, Bic High-Flow, 12 x 16.5 Tires, 74” Bkt ..................................................$40,500

2012 Case SR250, s/n 2011 Case SR250, s/n JAFSR250LCM44755, JAFSR250PBM442384, 1000 Hrs, Cab 1150 Hrs, Cab w/Heat & AC, Bic High-Flow, w/Heat & AC, Bic High-Flow, 12 x 16.5 Tires, 12 x 16.5 Tires, 78” Bkt ..................$39,500 78” Bkt ............................................$43,900

CX240 Excavator

CX330 Excavator

MC r h EJH EFQUI $700/Day, $2,100/Week, $6,300/Month

MC r h EJH EFQUI MC r h EJH EFQUI equipment. Call us today to supply your next $875/Day, $2,625/Week, $7,875/Month $1,235/Day, $3,705/Week, $11,115/Month

2013 Takeuchi TS70V, s/n T3V07000217, 300 Hrs, Cab w/Heat & AC, Two Speed, 72” Bkt w/Edge, 12 x 16.5 Tires ............$35,900

Indiana Schererville* 219-865-6545

McCann CX460 Rents aExcavator full line of heavy and light construction rental. McCannOnline.com

*Case authorized dealer location

1985! e c n i S Check this Price! New 2014 IMT DOM2 11-FT Body No CDL or DEF Required 7500# 30’ Hydraulic Crane with Radio Remote Controller, Hydraulic Compressor & Other Extras, HD 8 Drawer Tool Chest & Basic Shelf Package, Mounted on 2004 International 4300 26K GVW w/ 225hp DT-466, 6 Speed Manual, Air Condi-tioning, Approx. 180,000 Miles, Very Clean Unit!! Special Sale Price … $87,950

Check this Price! New 2014 IMT DOM2 14-FT Body 10K, 30’ Crane with Radio Controls, Hydraulic Outriggers, All Raised Compartments, 8 Drawer Tool Chest, Lots of Other Shelves, 40 CFM Hy-draulic Compressor with hose reel. Mounted on ‘04 Freightliner M2 Series with Cat C-7, 250hp, approximately 175K Miles, 33K GVW with Auto-matic Transmission, Air Brakes. Ready to go. Special Sale Price…$108,500

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

Call Jerry Jaksich at 515-343-5464 or 877-267-7203

Star Equipment

STAR

Construction Equipment & Supplies Sales • Service • Rentals

EQUIPMENT LT D .

www.starequip.com 877-267-7203 Des Moines • Ames • Cedar Rapids • Waterloo

www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 7

JD 672G, Low Cab, Air, JD 844J, Cab, Air, 7.25 GP Bkt, #91799 ............ Rear Ripper, Front Scarifier, #75640 .......... ......................$185,000 ......................$209,000

JD 1812C, Carryall, JD 544K, Cab, Air, Pin Case STX550, 1760 hours, #75383 .............. Auto Load, #91673........ On 4.5yd Light Material ......................$238,000 ........................$59,000 Bkt, #75700 ....$129,000

JD 160DLC, 10’ 2” Arm, JD 400D, 8000 Gallon Water Tank, #74752 ...... 28” Pads, Hyd Thumb, ......................$239,000 PT+Hyd Warranty, #75616 ..........$158,000

Low Hour JD 844K’s Available, 0% for 36 Months on Select Units

JD 850K, 24” Pads, JD 655C, Cab, Air, 128” Semi U Blade, 22” Pads, 2.35 yd Bkt, #91900 ............$69,000 Winch, 2,044 hours, #74612 ..........$259,000

NPK Hammers, All Sizes for All Makes. Inspected and Well Maintained, GH4-GH18

JD 350GLC Material JD 850J, LGP, 36” Handler, #52129 .......... Pads, 152” Semi U ......................$495,000 Blade, 4223 hours, #51421 ..........$168,000

Challenger MT955B, Bomag BW211D-4, Cab, Air, Duals, #75562 Orops, 84” Smooth ......................$138,000 Drum, #75340 ..$67,000

Page 8 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Pink Case 621F Battles Cancer One Snowflake at a Time Wintec Building Services of Winnipeg, Manitoba, recently purchased a pink Case Construction Equipment 621F wheel loader. The loader, the first of its kind to be produced by Case’s Fargo, N.D., plant, will primarily be used to help with the snow removal of the city’s roads. Ten percent of the profits generated from the custom-ordered loader will be contributed to the Canadian Breast Cancer Foundation — Prairies/NWT region. The Web site where people can make a donation, www.wintec.ca, also will be displayed on the machine. The idea for the loader started when Doug Huselak, general manager of Wintec, lost his aunt to breast cancer. He decided to approach the Foundation about participating in a larger-than-usual donation. “Wintec is committed to giving back to our community, while at the same time raising awareness for breast cancer. By donating 10 percent of the proceeds generated by our pink loader, we are hopeful we can make a difference in fighting this disease that affects so many,” Huselak says. “The ‘big pink’ loader is a recognizable figure and should heighten the awareness of the cause.” Huselak and the Canadian Breast Cancer Foundation worked together to come up

Wintec’s Case 621F pink wheel loader.

Representatives from Wintec, Canadian Breast Cancer Foundation, and Hitrac.

with the idea for the bright pink loader. “Wintec approached us with this great idea back in August. It was tough to think about the upcoming winter and all the snow, but this pink loader will definitely brighten up our winter,” said Monique LevesquePharoah, senior development officer of funds development, Canadian Breast Cancer Foundation, Prairies/NWT region. In order to move forward with their plan,

Wintec worked with their local dealer, Hitrac. Paul Scharf, president of Hitrac, thought it was a great idea and helped get the process moving with the manufacturer. “It really brings the cause to the construction industry,” said Scharf. “I’m glad to see the exposure coming. It’s pink. You’re not going to miss this on a city street.” Along with the bright pink paint job, the loader also is covered in decals from the

Canadian Breast Cancer Foundation. The partnership between the foundation and Wintec also brings awareness to breast cancer in men. In fact, according to the American Cancer Society, 2,360 new cases of intensive breast cancer will be diagnosed in men in 2014. As Levesque-Pharoah said, “We all have to be breast aware.” She continued, “As long as this machine is clearing the Winnipeg streets, it will be helping create a future without breast cancer…one snowflake at a time.” (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

JCB’S John Patterson Elected 2015 Chair of the AEM John Patterson, chairman of JCB USA Group, director of the JCB Group and former CEO of JCB North America, has been elected 2015 chair of the Association of Equipment Manufacturers (AEM). AEM is a North American-based international trade group for the offroad equipment manufacturing industry (agriculture, construction, forestry, mining and utility sectors). Patterson also serves as an AEM director. Patterson joined JCB in 1971 as a field service engineer and officially retired at the end of 2013 from his position as CEO of JCB North America after 43 years of service. Patterson currently serves as Chairman of the JCB USA Group. “AEM officers and directors are active members of the association and selected from representative member companies to provide guidance and leadership to set the strategic direction for the organization,” said AEM President Dennis Slater. “They reflect an industry crosssection; their dedication of time and energy to this volunteer service helps ensure association programs continue to meet member needs.” “I’m extremely honored to have been chosen to chair this very prestigious international group,” Patterson said. I’m looking forward to a very productive year, working with AEM’s board of directors to establish and achieve the association’s goals.” For more information, visit www.jcbna.com. AEM 2015 Officers (L-R, seated): AG Chair James Walker of CNH Industrial, Treasurer Göran Lindgren of Volvo Construction Equipment; (L-R, standing): Vice Chair Leif Magnusson of CLAAS of America; Secretary Dennis Slater of AEM; Chair John Patterson of JCB Inc.; and CE Chair Michael Haberman of Gradall Industries Inc.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees WHEEL LOADERS

Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25 rubber, 15K hours, work ready . . . . . . . . . . . .$42,500 Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . . . .$79,500 John Deere 624G, 1996, EROPS, quick coupler, GP bkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$46,000 Volvo L60E, 2005, EROPS, coupler, aux hyd, boom susp, 20.5R25, v. good . . . . . . . . . . . . . . . . . .$89,500 COMPACTORS

IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean $69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000 (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500 LANDSCAPING

Case/IH 485 Utility Tractor, 1986, Case 3 cyl dsl engine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd angle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500 CRAWLER LOADERS

Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt .$37,500 Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000

OFF ROAD HAULERS Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready . . . . . . . . . . . . . . . .$127,500 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites . . . . .$87,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 CRAWLER TRACTORS

Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6" TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000 (5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALL Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB coupler, plumbed, 8’6” width, nice, work ready . .CALL Volvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing very good condition . . . . . . . . . . . . . . . . . . .$159,000 TRUCKS & TRAILERS

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL AIR COMPRESSORS

IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL SPECIALS

(12) Allmand Light Plants, 2008-2010, diesel, s/a towtype, (4) MH lights, excellent . . . . . . . . .From $5,200

(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, BACKHOES winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea. Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000 Case 580L Rubber Tire Loader Backhoe, 1997, (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea. DRILLS John Henry Drill Mtd on Cat 320N, 1994, 24' mast, CRANES Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, Duraquip dust collection . . . . . . . . . . . . . . . .$150,000 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 MISCELLANEOUS Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom (2) Balderson Broom Attachment for Cat IT Machines, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. MOTOR SCRAPERS

ATTACHMENTS Cat 613C Water Wagon, 1994, 5000 gal drop tank, BUCKETS ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 PC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good Over 100 Excavator, Loader, Specialized & Grapple condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Buckets in Stock Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice -Call For Your Needs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, HYDRAULIC EXCAVATORS excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick couOthers Available Call pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000 Prices Are Negotiable - At Your Inspection Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber, All Equipment is Owned & Operated By operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER ALEX E. PARIS CONTRACTING CO., INC.

Page 10 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

VOLVO USED EQUIPMENT Contact your local dealer: Doug Wilson 704.562.2032 doug.wilson@ascvolvo.com Billy Brice 678.318.9500 billy.brice@ascvolvo.com

ASC Construction Equipment USA, Inc. North Dakota Bismarck Fargo Minot Williston North Carolina Charlotte Raleigh Asheville Greenville South Carolina Columbia North Charleston Piedmont Georgia Buford Forest Park Savannah East Tennessee Knoxville Chattanooga

2013 VOLVO EC250DL, 2281 Hrs ......$170,500

2011 VOLVO A25F, 4300 Hrs......$242,000

2012 VOLVO L110G, 2650 Hrs ....$210,100

A40 Finance leasing available for 24 months with payments as low as $7,900 per month. Call Doug Wilson for details.

Excavators-Crawler 2013 KOMATSU PC360 LC-10, 900 Hrs ....................................$278,000 (2) 2008 VOLVO EC210C LC, 2295-3291 Hrs $104,500-$126,500 2011 VOLVO EC210CL, 3693 Hrs ................................................$138,900 2013 VOLVO EC220D, 2353 Hrs ....................................................$144,500 (5) 2013 VOLVO EC220DL, 1565- 2723 Hrs ....$123,750-$150,000 2008 VOLVO EC240CL, 7000 Hrs ..................................................$93,500 2011 VOLVO EC240CL, 3100 Hrs ................................................$150,000 2012 VOLVO EC250D LR, 2236 Hrs ............................................$189,000 2011 VOLVO EC250DL, 3400 Hrs ..................................................$161,250 2013 VOLVO EC250DL, 2281 Hrs..................................................$170,500 2004 VOLVO EC290B LC, 9540 Hrs ..............................................$46,200 (2) 2011 VOLVO EC340DL, 3594-4554 Hrs ......$177,800-$184,000 (7) 2012 VOLVO EC340DL, 1905- 3900 Hrs ....$181,000-$220,000 (6) 2013 VOLVO EC340DL, 1549- 2765 Hrs ..$203,500- $231,000 2013 VOLVO EC380DL, 3102 Hrs ................................................$222,000 2011 VOLVO EC460C LC, 5728 Hrs............................................$250,000 (2) 2012 VOLVO EC480DL, 2700-2720 Hrs ....$291,500-$328,000 2013 VOLVO EC480DL, 2783 Hrs ................................................$324,500

Excavators-Wheel (2) 2011 VOLVO EW180C, 2931-3273 Hrs ........$161,200-$166,700 2012 VOLVO EW180D, 1785 Hrs ..................................................$194,500 2013 VOLVO EW180D, 1561 Hrs ..................................................$195,250

Motor Graders 2008 VOLVO G930, 7521 Hrs..........................................................$121,000 2011 VOLVO G946B, 1837 Hrs ......................................................$211,200

Off-Highway Trucks 2011 VOLVO A25F, 4300 Hrs ..........................................................$242,000 (3) 2012 VOLVO A25F, 2900-3121 Hrs ..............$283,500-$305,750 (5) 2013 VOLVO A25F, 1586-2000 Hrs ..............$286,000-$305,000 2005 VOLVO A30D, 7521 Hrs..........................................................$159,500 2008 VOLVO A30E, 7600 Hrs ..........................................................$170,500

Full inventory at: www.ascvolvo.com

2011 VOLVO A30E, 3409 Hrs ..........................................................$283,500 (10) 2012 VOLVO A30F, 2525-3969 Hrs............$297,000-$328,000 (3) 2013 VOLVO A30F, 1954-3000 Hrs ..............$324,500-$330,000 2014 VOLVO A30F, 1790 Hrs ..........................................................$328,600 2012 VOLVO A35F, 2652 Hrs ..........................................................$388,300 2010 VOLVO A40E, 3873 Hrs..........................................................$339,200 (10) 2011 VOLVO A40F, 3720-6615 Hrs ............$319,000-$383,000 (22) 2012 VOLVO A40F, 2462-5758 Hrs ............$324,500-$447,000 (13) 2013 VOLVO A40F, 1575-4368 Hrs ............$368,500-$473,000 (4) 2013 VOLVO A40F FS, 1875-3799 Hrs ........$390,500-$494,750 2014 VOLVO A40G, 2070 Hrs ........................................................$484,000

Water Equipment - Truck 2006 CATERPILLAR Water Truck, 11,218 Hrs............................$242,000 2010 VOLVO A30, 1561 Hrs ............................................................$275,000 2006 VOLVO A30D, 7500 Hrs..........................................................$255,750

Wheel Loaders 2012 VOLVO L30B, 3706 Hrs ............................................................$48,400 2013 VOLVO L60G, 1583 Hrs ..........................................................$144,000 2012 VOLVO L70G, 1850 Hrs ..........................................................$151,250 (2) 2013 VOLVO L70G, 2823-3109 Hrs ..............................$147,000 Ea. (10) 2012 VOLVO L90G, 1189-3219 Hrs ............$165,000-$192,500 (21) 2013 VOLVO L90G, 390-4582 Hrs................$147,400-$199,100 2010 VOLVO L110F, 5350 Hrs ........................................................$155,600 2011 VOLVO L110F, 6883 Hrs ........................................................$136,400 (3) 2012 VOLVO L110G, 1651-4397 Hrs ............$170,000-$233,200 (7) 2013 VOLVO L110G, 1743-3481 Hrs............$204,600-$226,600 2014 VOLVO L110G, 565 Hrs ..........................................................$249,700 2009 VOLVO L150F, 73,338 Hrs ....................................................$183,400 (2) 2010 VOLVO L150F, 11,436-13,235 Hrs ......$133,400-$133,500 (2) 2012 VOLVO L150G, 2869-2891 Hrs............$267,000-$305,750 2011 VOLVO L180G, 5216 Hrs ......................................................$278,000 2013 VOLVO L180G, 3619 Hrs ......................................................$334,000 2013 VOLVO L220G, 1500 Hrs........................................................$413,400 (2) 2012 VOLVO L250G, 2425-3392 Hrs ..........$355,000-$399,000

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 11

NORTH DAKOTA Bismarck 701.250.4882 Fargo 701.271.2360 Minot 701.839.4020 Williston 701.570.5309

GEORGIA Buford 678.318.9500 Forest Park 770.319.0074 Savannah 912.964.8079

SOUTH CAROLINA Charleston 843.414.1120 Columbia 803.791.0740 Piedmont 864.704.1060

NORTH CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710

TENNESSEE Chattanooga 423.308.7940 Knoxville 865.525.1845

You’ve got a lot of jobs to do. You choose a dealer who supports every one.

Smart Works. If it’s time for some new equipment, it’s time to get to your local ASC Construction Equipment. Get the job done with reliability and power, along with legendary Volvo comfort and safety. Work smart and put the power into your jobs.

ascvolvo.com

Page 12 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Pal3 612 Trench Box Helps Olson ‘Keep Your Sewer in Pink’ In keeping true to its slogan, “Keep Your Sewer in the Pink,” Olson’s Sewer Service of Forest Lake, Minn., has gone one step beyond and taken delivery of the first ever trench box painted Olson’s signature hot pink to match the company’s vehicles. The 60-year-old family business purchased its pink trench box from a company it’s been working with for more than 20 years; Gary Carlson Equipment, located in Blaine, Minn. “When we were interested in purchasing a trench box, our sales representative Joe Miller provided great assistance,” said Jon Olson, president of Olson’s, adding that he gave sound advice on the slide in end panels and push pads. Even the pink paint was his idea, Olson said. The trench box, which has been “working out very well for [Olson’s] crew” is a Pro-Tec Equipment Model Pal3 612 specifically designed for municipal utility installation and maintenance, water, sewer, gas, fiber optic and cable installation, and other projects where rubber tire backhoes and small excavators are used. It features a 3 in. (7.6 cm) double wall and 6 ft. (1.8 m) tall by 12 ft. (3.65 m) long with 6 ft. (1.8 m) panels for four-sided protection. According to Olson, Carlson gives the “very best” in customer service and goes above and beyond. “We were introduced to the box manufacturer company owner and representatives. The personal level of attention received was much appreciated,” he said. Gary Carlson Equipment had similar praises to echo Olson.

Jon Olson (L), president of Olson’s Sewer Service and Olson’s Excavating Service, accepts delivery from Joe Miller, salesman of Gary Carlson Equipment.

Miller has known the family for more than 25 years and attests that they are some of the most dedicated and well respected individuals in the business. History of Olson’s Sewer Service In 1954, Bill Olson and wife Verna responded to their entrepreneurial spirit and started Olson’s Sewer Service at Coon Lake Beach. It wasn’t long before the first truck was painted pink with

the slogan “Keep Your Sewer In the Pink” boldly stated across the tank of the pump truck. As the customer base grew, so did the demand for additional services. The company began making repairs on existing systems and installing new ones. Eventually drain cleaning services were added. New technology has offered equipment to assist in diagnosing problems in sewer lines and systems. Today crews are equipped

In the ‘50s being “in the pink” meant in very good condition, strong and operating well. A perfect fit for the Olsons who looked forward to making sure everyone’s sewer was in top shape.

with line televising and recording equipment and can pinpoint problem spots and the depth of piping resulting in more efficient excavation and minimizing repair time. With the right equipment and expertise to install new systems came all the tools needed to expand into excavation for new homes and businesses. Jon Olson always had a passion for moving dirt and operating equipment. He has grown the business to include a full range of exca-

vating services for residential, commercial and municipal customers. Olson’s Excavating Service is involved in site development, new and remodel construction, sewer and water hook-ups, storm sewer and drainage work, finish grading and more. Celebrating its 60th year in business, the company serves the seven county Metro area and employs more than 20 people. For more information, call 651/464-2082. see OLSON page 26

In 1954, Bill Olson and wife, Verna, responded to their entrepreneurial spirit and started Olson’s Sewer Service at Coon Lake Beach. It wasn’t long before the first truck was painted pink with the slogan “Keep Your Sewer In the Pink” boldly stated across the tank of the pump truck.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 13

www.liugongna.com T O U G H W O R L D . T O U G H E Q U I P M E N T. We make one of the broadest lines of construction, mining, road building and material handling equipment in the world. All

EVERY JOB. EVERYWHERE.

backed by top-notch warranty, training, parts and service support. Contact your local dealer today for more information...

MidWest Ready Mix & Equipment 1405 East Highway 50 • Vermillion, SD 57069 605-638-0897 www.buyaloader.com

Page 14 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

You excavate more work – and more profit.

Smart Works.

BURNSVILLE, MN 800.552.1189 DULUTH, MN 800.835.6225 MANKATO, MN 800.862.6225 ROCHESTER, MN 800.562.1505 ROSEVILLE, MN 800.704.0935 ST. CLOUD, MN 888.310.6225 You do it with a machine you can depend on – Volvo Excavators. You work with a dealer you can rely on – Nuss Truck & Equipment. Smart Works – every day.

TOOLS THAT MAKE YOUR BUSINESS WORK™

Volvo Construction Equipment

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 15

(262) 781-3770 Jim King Mobile: (414) 530-0592 13001 W. Silver Spring Drive Butler, WI 53007

SEE PHOTOS

OF OUR

Fax: (262) 781-5053 Email: jking@aring.com

COMPLETE INVENTORY

AT WWW.ARINGEQUIPMENT.COM

2013 Volvo L110G, 113" 4.1 cy bkt, 23.5R25 tires, full fenders, block heater, reversible cooling fan, radio w/cd, rear camera, hyd 3 functions, boom suspension, logging counterweight ...... ..................................................................................$249,500

2011 Volvo DD138HF - Back up alarm, infrared temp sensor, work lights, 328 gal water tank cap, operating weight 30,325 lbs, vibrating frequency: 3200 vpm, vibration centrifugal force: 21,840-42,260 lbs, 84" drum width ................................CALL

2007 Volvo L350F, Cab, A/C, Radio w/CD, Air Suspension Seat, Comfort Drive Control, Work Lights, Boom Suspension, Engine Block Heater, Auto Lube System, Full Rear Fenders, 156” 10.1cy Spade Nose Rock Bucket w/Teeth & Segments, 35/65R33 Tires 80%........................................................CALL

2012 Volvo ECR58, 16” Rubber Tracks, Auto Idling, Heat/AC, Pilot Controls, Counterweight ......................................$65,000

2012 Volvo L150G, 26.R25 L3 VJT Bridgestone Tires, Volvo D13H-E Engine, Radiator, Reversible Cooling Fan, Rear View Camera, Engine Block Heater, Boom Suspension, Rehandling Counterweight, 126” 5.5cy GP STE Bucket w/BOE ..$265,000

2007 Volvo L70F, Cab, A/C, Radio w/CD, Operator’s Seat w/Left Hand Armrest, Sliding Window Operator’s Door, Work Lights, Boom Suspension, 3rd Function, Hydraulic Attachment Bracket, Reversible Cooling Fan, Engine Auto Shutdown, Reverse Alarm, Rotating Beacon, Rear Frame Cover Plates, Full Rear Fenders, 100” 2.9cy Bucket w/BOE, 20.5R25 Tires ..................................................................................$110,000

2013 Volvo BL70B, Municipal trade, 92.5" loader bucket, mech. att. bracket, 1.3 CY GP bucket w/ spill guard, EXT dipper arm, pilot controls,4WD, A/C, radio w/CD, MP3 connection, double battery, boom suspension, additional 1080lb counterweight ..........................................................................$70,500

2012 Dressta TD25M, 26" Severe Service Pads, 90% UC, Hydraulic Controls (3 Spool Valve / 2 Lever), Severe Service Crankcase & Transmission Guards, Final Drive Rock Guard, Full Length Track Roller Guard, Engine Block Heater, Start/Charging Receptacle Plug Assembly w/15' Cable, SemiU Blade (12.5cy) w/Reinforced Center Push Plate & Hydraulic Tllt, Fixed Drawbar ....................................................$250,000

2008 Ingersoll Rand PT240R, 78” Pneumatic Tire Compactor, Orops, Dual Operator Station, Cummins BT4.5C99 Engine (99hp), Powershift, Differential Lock, Pressurized Water System w/Cocoa Mats, (8) 11.00X20 18ply Tires ..............................................................................$69,500

2011 Volvo L220G, A/C, Radio w/CD, Heated Air Susp Seat, Rear Camera, Electro-Hydraulic Servo Controls, OptiShift, Comfort Drive Control, Boom Suspension, Work Lights, Reversible Cooling Fan, Axle Oil Cooling, Engine Block Heater, Full Rear Fenders, Re-Handling Counterweight, CareTrack Hardware, 134” 8.2cy STE Bkt w/BOE, 29.5R25 Michelin L-4 Tires, Volvo D13H-F (Tier 4i) ..........................................CALL

2011 Volvo SD116DX, Work lights, flow divider, bolt on pad foot shell, inside scrapper, universal scrapper, grill support installation, operating weight 23,930 lbs, vib frequency 1,870-2,018 vpm, vibration centrifugal force: 47,900-61,000 lbs, 84" drum width ..........................................................................$117,000

2012 Volvo BL70B, Municipal Trade, 92.5” Loader Bkt, Mech. Att. Bracket, 1.3 CY GP Bkt w/Spill Guard, EXT Dipper Arm, Pilot Controls, 4WD, A/C, Radio w/CD, MP3 Connection, Double Battery, Boom Suspension, Additional 1080lb Counterweight .. ......................................................................................$69,500

1999 Volvo L90C, Cab, Heater, Contronics, F/R Switch, Heated Operator’s Seat, Work Lights, Hydraulic Attachment Bracket, Right Hand Footstep, Towing Hitch, 3.5cy Bucket w/BOE, 20.5-25 Tires ..................................................$37,500

2013 Volvo EC250DL, Municipal trade, 19'9" boom, 11'10" arm, 36" track pads, engine block heater, air susp seat w/heat, joystick 3 switch & 1 prop, climate control with a/c, radio w/cd, rear view camera, 2 pump double act. piping, quick fit piping, pilot pattern controls, straight travel pedal, caretrack ..............CALL

2011 Volvo DD70HF, Backup Alarm, Operating Weight 14,895 lbs, 205 Gallon Water Tank Capacity, Vibration Frequency: 4000 VPM, Vibration Centrifugal Force: 7,820-21,080 lbs, 57” Drum Width ....................................................................CALL

2002 Volvo EW170, A/C, Radio, Joystick w/5 Switches, 17’1” Mono Boom, 8’6” Stick, Q/C Piping, Hammer/Shear Piping (X1-2 Pump Flow), Engine Block Heater, 4 Outriggers, 10.0020 Dual Tires, Helac q/c, 60” Hyd Tilt Ditching Bucket $55,500

WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL BREK ZORTMAN (414) 750-3351 FOR MORE INFO.

Page 16 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Liebherr Construction Opens Western U.S. Spare Parts Depot

The new logistics center for Liebherr earthmoving machines in Oberopfingen.

Liebherr shapes its global, local and regional spare parts distribution and logistics to support its rapid growth and exceed customer-service expectations around the world. Several positive developments that have a strong impact in the fulfilment and distribution of earthmoving Liebherr spare parts globally and within the United States have been announced in the last months by the Liebherr Group. In October of this year, the Liebherr Group gave a glimpse into the progress of its new spare parts and logistics center in Kirchdorf, Germany. The new facility to begin operations in early 2015, is expected to serve as its global logistics hub for earthmoving spare parts. The investment value for the first stage of construction is in excess of $143 million and covers an area in excess of 505,000 sq. ft. A large part of the investment has gone into implementing highly automated warehouse equipment and software that will enable the logistics center to employ leading-edge performance standards. The new warehouse solutions will allow the group to handle higher volumes of spare parts, reduce turn-around times and guarantee order accuracy for Liebherr customers around the world. Additionally, the Liebherr Group is continuing a significant investment in building improvements, machinery, tools and infrastructure to expand the factory and enhance the warehouse facility at

its Newport News, Va., location. These renovations are part of the $45.4 million investment as announced earlier this year by Liebherr Mining Equipment Newport News Co. The Newport News location serves as the headquarters and central warehouse for the Liebherr Mining Division and for four other operating Liebherr companies; Liebherr Construction Equipment Company among one them. Major warehouse overhauls

include; the implementation of a sophisticated warehouse management system (WMS) and wide range of process-improvement initiatives consisting of a new racking system adding additional locations and increased load-bearing capability, more than 100,000 sq. ft. of new epoxy floor to facilitate the heavy traffic and movement of material, and eight new additional loading docks to speed up the traffic and help with the flow of trucks

Preliminary commissioning zone for automatic shelving system at the new Liebherr logistics center in Oberopfingen.

loading and unloading materials at the facility. “The new WMS offers a multitude of functions that will optimize the overall logistics and support the daily operations of the facility. It will provide a transparent work flow and enhance the visibility of the activities at each of the warehouse terminals; from receiving thru shipping, in addition to providing inventory accuracy,” said Martin Seitz, WMS project coordi-

Manual warehouse area and automatic dispatch at the new Liebherr logistics center in Oberopfingen.

nator at Liebherr Mining Equipment Co. Liebherr Construction Equipment Co. also announced the opening of a new spare parts facility located in Visalia, Calif. The new depot is expected to begin operations in early 2015. The facility will support western U.S. distribution with localized parts warehousing. The National Parts Distribution Center in Newport News, Va., along with its new distribution center in California, will help expedite parts orders, improve operational efficiency and minimize transit time while increasing customer support. “The opening of the new spare parts and logistics center in Germany along with the expansion and overhaul of our Newport News operations, and the opening of the parts depot in the western United States, is part of Liebherr’s ongoing commitment to better serve our customers not just throughout the world but also throughout the United States. This represents a significant step forward in our customer support,” said Peter Mayr, president of Liebherr Construction Equipment Co. “We continue to invest in our operations to ensure we provide our dealer network and customers with the exceptional support they expect from Liebherr.” For more information, visit www.liebherr.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 17

Page 18 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

I-35 & Hwy 60W • Faribault, MN Give Paul, Herb or Blake a Call Today

507-334-2233

2014 Quadtrac 580 Scraper Version, 505 Hrs, **LEASE** 24 Months 1200 Hrs/Year...$64/Hour w/Powertrain Warranty

Ashland I-200..........$69,900

2014 QUADTRAC 580 SCRAPER TRACTOR

$64.00 per hour w/Powertrain warranty

2014 Quadtrac 500 Scraper Version, 404 Hrs, **LEASE** 24 Months 1200 Hrs/Year...$56.54/ Hour w/Powertrain Warranty

‘08 ‘13 ‘12 ‘13 ‘14 ‘14

2008 Quadtrac 535 Scraper Version, 2762 Hrs, Leather, Very Nice..................................$189,900

CIH Steiger 535 Quad, 2762 hrs..........................$189,500 CIH Steiger 550 Quad, 790 hrs ..........................$285,500 CIH Steiger 550 Quad, 1245 hrs..........................$269,900 CIH Steiger 550 Quad, 852 hrs ..........................$285,000 CIH Steiger 500 Quad, 404 hrs............................$319,900 CIH Steiger 580 Quad, 505 hrs ..........................$339,900 All have: Scraper Version, leather cab, susp cab, big hyd pump, hid lights, Diff Lock Large Rental Inventory 550 Quadtracs & Scrapers

ASHLAND I-200 22946 2012 ........................................$69,900 ASHLAND I-200 22947 2012 ........................................$69,900 REYNOLDS 17E 34975 2006 ......................................$49,500 REYNOLDS 17E 35093 2006 ......................................$49,500 REYNOLDS 17E 35096 2006 ......................................$46,800

www.matejcek.com

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ December 20, 2014 â&#x20AC;˘ Page 19

Â&#x160;Â&#x2022;Â&#x2022;Čą Â&#x2DC;Â&#x17E;Â? Call DougČąČŚ/Čą Â&#x160;Â&#x;Â&#x17D;ÇąČąČą Sam: (866) 485-7180

2002 Komatsu PC95R-2: #50051, Cab/Heat, 20â&#x20AC;? Tracks, Aux Hyd, Blade, 1950 Hrs ............$69,500

2001 Komatsu PC138US-2: #80876, Cab/AC, 8â&#x20AC;&#x2122;6â&#x20AC;? Arm, 4550 Hrs............................................$59,500

2004 Komatsu PC160LC-7: #81899, Cab/AC, Aux Hyd, 5100 Hrs............................................$84,500

2003 Komatsu PC200LC-7: #92106, Cab/AC, 9â&#x20AC;&#x2122;7â&#x20AC;? Arm, 31.5â&#x20AC;? Tracks, Aux Hyd, 6300 Hrs ....$79,500

2006 Komatsu PC200LC-8: #82111, Cab/AC, 9â&#x20AC;&#x2122;7â&#x20AC;? Arm, 31.5â&#x20AC;? Tracks, KOMTRAX, 4100 Hrs$121,500

2001 Komatsu PC220LC-6: #80381, Cab/AC, 60â&#x20AC;&#x2122; Long Front, 60â&#x20AC;? Long Front, 60â&#x20AC;? Ditching Bkt, 5700 Hrs ..................................................$139,500

2007 Komatsu PC220LC-8: #81992, Cab/AC, 9â&#x20AC;&#x2122;7â&#x20AC;? Arm, KOMTRAX, 7350 Hrs........................$99,500

2006 Komatsu PC228USLC-3: #82164, Cab/AC, JRB QC, Hyd Thumb, 4550 Hrs ..............$139,500

2008 Komatsu PC270LC-8: #91822, Cab/AC, 11â&#x20AC;&#x2122;6â&#x20AC;? Arm, 31.5â&#x20AC;? Tracks, JRB QC, 10,150 Hrs ..$99,500

1999 Komatsu D41P-6: #5952, Cab/AC, 28â&#x20AC;? Tracks, PAT Blade, 4750 Hrs......................$59,500

2005 Komatsu D61EX-15: #91765, Cab/AC, 24â&#x20AC;? Tracks, PAT Blade, 2650 Hrs ..................$134,500

2008 Komatsu D65EX-15EO: #81377, Cab/AC, 24â&#x20AC;? Tracks, Drawbar, 3300 Hrs ..............$159,500

Page 20 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

S.D. Homebuilder Takes Control of Residential Excavation By Philippe Bisson SPECIAL TO CEG

Daene Boomsma first built his name as a homebuilder. His construction company, Boom Construction, thrives in Rapid City, S. D., due to his attention to detail and one-on-one relationship with each of his customers. But in order to build a house, you’ve first got to dig a hole — and Boomsma took matters into his own hands to ensure his homes were built to his quality expectations. “We live in a beautiful area, but unfortunately there are a lot of soils that are unstable — there’s a lot of shale,” said Boomsma. “That was the primary driver for starting my own excavating company — I couldn’t get the work done the way I wanted it done. Once I started… doing the work the way it needed to be done to accommodate the soil problems, we were able to build in areas that other builders weren’t… or were afraid to build.” The company Boomsma formed, Professional Excavating, has grown exponentially since it was formed — almost tripling in business each year. To accommodate that growth, the company has doubled its fleet from one 16-ton (14.6 t) excavator to two 16-ton excavators. And due to fuel savings, the support of the local dealer, and an ambitious maintenance, telematics and warranty package offered by the manufacturer (Case ProCare), he’s been able to grow the business with minimal impact to his bottom line. “During my five slowest months — we made half the payment on fuel savings alone,” said Boomsma. “It was the difference between my operators running a 10-year-old machine or a brand new machine. When I can do that and not cost myself anymore because of fuel savings — now I’ve got happier operators and an image that said ‘we care about our equipment and we buy good equipment.’ [And] it’s not costing me anything because of the fuel savings.” Size, Fuel Savings Drive Choice As Boomsma updated his excavator fleet, two primary factors affected machine selection: fuel

Professional Excavating owner Daene Boomsma estimates that the new excavators are 2 to 5 gal. (7.5 to 18.9 L) per hour more fuel efficient than his previous excavator in the same size class.

Annual fuel savings are estimated to be at least $33,000/year.

head-to-head analysis of his machine helped convince him to trade it in and add two new Case CX160Cs. “We discovered that, Professional Excavating relies on a planned maintenance contract with depending on the use and Titan Machinery to handle all PM work as part of the Case ProCare pro- what we were doing at the gram. time, we were going to save between 2 and 5 galsavings and the size of the the biggest machine to move the machine. He specified a machine amount of dirt that is required. On lons an hour with the Case in the 16-ton size class because it this machine he actually uses a 48- CX160C versus the 160 that I proved easy to haul in and out of inch bucket, which is just about the owned,” said Boomsma. Using the conservative end of residential areas, and it could be largest that you’d use [on this size outfitted with larger buckets for machine], and it handles the rock that spectrum (2 gal. [7.6 L] per greater productivity. (The excava- and denser soils well — yet [the hour) and average diesel prices in South Dakota on Nov. 4, 2014 tors he ultimately chose — two machine] has the mobility.” CX160Cs from Case — weigh in “We can get in and out a lot ($3.43 per gallon), Boomsma can at 38,001 lbs. [17,237 kg] and are quicker than other contractors save approximately $343 per week 9-ft. [2.7 m], 8-in. [20 cm] tall by because we have equipment just on one excavator and $686 per 8-ft. [2.4 m], 5-in. [12.7 cm] wide). big enough that we can do the week on two. Spread out over the “He does a lot of residential work twice as fast, but just small course of the month, and savings work, and you don’t want to be enough that we can still fit in all of can be as much as $2,744. With fuel savings in some applications bringing a lowboy in and out of our sites,” said Boomsma. some of these [residential areas],” Initially, he only intended on ranging as high as 5 gal. (18.9) per said Marcus Lavake, complex adding one new machine to his hour — and diesel fuel fluctuating manager, Titan Machinery (local fleet to complement the 16-ton north of $4/gal. throughout the Case dealer). “But you still need excavator he already owned. But a year – the actual savings could be

significantly higher. Annual savings start at just under $33,000. “The fuel savings alone made half of my payments that I had on my two machines,” said Boomsma. “[And that doesn’t take] into account any production, any work I’ve done.” “At the end of the day, he’s actually spending less money on better equipment,” said Lavake. “We were able to double his fleet, double his capacity and reduce his expense. A side benefit that we didn’t expect is that his operators are actually happier, they’re in an environment in their machine where they’re not tired at the end of the day.” The main drivers for the fuel savings are advances in hydraulics and electronics. The CX160C features the Case Intelligent Hydraulic System (CIHS), which includes four integrated hydraulic control systems that, through the machine’s lift/dump and dig/curl see BOOM page 76

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 21

Page 22 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 23

2011 CATERPILLAR 247B3, ID# MUC0332, S/N TSL00465, 1943 HOURS, CAB, A/C ........................$33,100

2008 CATERPILLAR 315DL, ID# NUC0294, SN# CJM00270, 4510 ..............................................$101,900

2010 CATERPILLAR 299C, ID# NUC0128, S/N JSP00798, 2045 HOURS, CAB, AC ..........................$48,600

2008 CATERPILLAR 247B2, ID# NUC0184, S/N MTL05450, 2940 HOURS ..........................................$19,700

2005 CATERPILLAR TH580B, ID# 0CR4563, S/N SLH00411, 2910 HOURS, STABILIZERS ................$54,300

2008 CATERPILLAR 272C, ID# NUC0126, S/N# RED01432, 3130 HOURS, CAB, AIR ......................$31,100

2009 CATERPILLAR 140M, ID# NUC0133, SN# B9D01845, 5775 HRS......................................$160,700

2008 CATERPILLAR 287C, ID# NUC0080, S/N MAS01333, 4300 HOURS, CAB, AIR ......................$28,500

2009 CATERPILLAR D7R, ID# NUC0217, S/N# AEC02154, 13,825 HRS ................................$165,900

2009 CATERPILLAR 12M, ID# MUC0321, S/N B9F00371, 4870 HOURS, CAB, AIR ......................$144,700

2009 CATERPILLAR 938H, ID# NUC0023, S/N MJC00642, 4570 HOURS ........................................$103,400

2008 CATERPILLAR 232B2, ID# NUC0236, S/N SCH03212, 2105 HOURS ..........................................$19,900

2008 CATERPILLAR D6TXL, ID# MUC0312, S/N LAY00759, 8075 HRS, CAB, AIR ............................$149,600

2012 CATERPILLAR 14M, ID# NUC0061, R9J00536, 4045 HOURS..............................................................$327,800

2013 CATERPILLAR 289C2, ID# NUC0181, SN# RTD00890, 750 HRS ..........................................$57,900

2005 CATERPILLAR 963C, ID# NUC0078, BBD01460, 8665 HOURS ..........................................$88,900

Kansas City (844) 845-8814 • Wichita (866) 773-5581 • ContactFoley@FoleyEQ.com

Page 24 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

We Keep Equipment Moving! Call me today, I’ll be glad to help you! ~ Kevin » The #1 Selling Rubber Track Brand In America! » REPLACEMENT UNDERCARRIAGE Bobcat®, Gehl®, Mustang®, Takeuchi®, CAT® 279, 289 & 299

800-365-7260

WE ACCEPT

Order online anytime » depparts.com »

Ashland, VA » Jacksonville, FL » Dallas, TX » Cincinnati, OH » Portland, OR » Sacramento, CA » Schenectady, NY

Custom Made Products Co. Humboldt, IA (800) 760-7871 Call Anytime 70-80 Scrapers on Hand at 15 Locations FOR SALE OR FOR RENT Locations: Humboldt, Bayard, DeSoto, Iowa Falls, Union, Manchester, Britt, Decatur City, Sac City, Woodbine, Readlyn, Chariton, Fremont, Newton & Wayne, NE

www.gncmp.com

We Will Not Be Undersold!

Free Delivery!

18 yd Ashland I-180 TS2s (New & Used) Call

13 yd Ashland I-130 XL2s (New & Used) Call

GRADERS

BIG DOG

Art’s-Way Graders, (New & Used) ................................................Call Johnson Graders (New & Used)....................................................Call All sizes available for either Manufacturer Leon Grader GZ400 ......................................................................Call

8 yd Big Dogs, (New & Used) ......................................................Call 6 1/2 yd Big Dogs, (New & Used) ................................................Call 5 yd Big Dogs, (New & Used) ......................................................Call 12’ Feedlot Box Scrapers..............................................................Call 10’ Feedlot Box Scrapers..............................................................Call 12’ Box Scrapers ..........................................................................Call 10’ Box Scrapers ..........................................................................Call 8’ Box Scrapers ............................................................................Call

ASHLAND 18yd Ashland I-180 TS2s, (New & Used) ....................................Call 17 1/2yd Ashland I-175 XL2, (New & Used) ................................Call 15 1/2yd Ashland I-155 TS2s, (New & Used) ..............................Call 15 1/2yd Ashland I-155 XL2s, (New & Used) ..............................Call 13yd Ashland I-130 TS2s, (New & Used) ....................................Call 13yd Ashland I-130 XL2s, (New & Used) ....................................Call 11yd Ashland I-110 TS2s, (New & Used) ....................................Call 11yd Ashland I-110 XL2s, (New & Used) ....................................Call 9yd Ashland I-900’s & I-950’s, (New & Used)..............................Call Ashland Groundhog GH2500, (New & Used) ................................Call

GARFIELD 12yd Garfield Model 1150s, (New & Used)..................................Call Garfield Model 1350s, (New & Used) ..........................................Call 8yd Garfield Model 850s, (New & Used)......................................Call 5yd Garfield Model 550s, (New & Used)......................................Call

IRONWOLF 8-12 yd ..........................................................................................Call

LEON 10-13 1/2 yd ..................................................................................Call

NEW & USED ROWSE 7 yd Rowse Model 7002 & 7004 ..................................................Call 5 yd Rowse Model 7002 & 7004 ..................................................Call 3 yd Rowse Model 3002................................................................Call

MISCELLANEOUS 1 1/2 yd & 3 yd Durabilts Model DP60 & DP84, (New & Used) ..Call 3/4 yd G&A Mini Scraper, (New & Used)......................................Call

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 25

Many Jobs. One Machine. NOW OPEN! Burnsville Location 1200 East Highway 13 Burnsville, MN 55337 (952) 894-0894

Little Canada Location 3101 Spruce St. Little Canada, MN 55117 (651) 407-3727

Hudson Location 745 Exchange Drive Hudson, WI 54016 (715) 531-0801

With a wide variety of attachments and simple controls, Toro® Dingo® TX compact utility loaders make quick work of any landscape project. From digging and hauling to trenching and tilling, it shows up for work every day to help you do more in less time.

COMING SOON! NEW Hudson Location Hwy 12 and I94 Hudson, WI

Page 26 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Minn’s Olson’s Sewer Service Takes Delivery of First Ever Pink Trench Box OLSON from page 12

Why Pink? Many important decisions are made around the kitchen table and for a true Scandinavian, often over a cup of coffee. And so it went when the time came to decide what color to paint the Olson’s Sewer Service vehicles. Verna’s sister Dagmar suggested pink. In the 50s being “in the pink” meant in very good condition, strong and operating well. A perfect fit for the Olsons who looked forward to making sure everyone’s sewer was in top shape. History of Gary Carlson Equipment Gary Carlson Equipment rents and sells trench safety, large water pumps and specialty concrete equipment outside of Blaine, Minn. The company was launched in 2003 based on a simple philosophy: focus on The company services the seven county Metro area a select group of customers we know and employs more than 20 people. personally; focus on a limited product

The 60-year-old family business purchased its pink trench box from a company it’s been working with for more than 20 years — Gary Carlson Equipment, located in Blaine, Minn.

set with an emphasis on cutting-edge technologies; and focus on service to make GCE the preferred supplier in the upper Midwest. To accomplish these goals Carlson has assembled a veteran team, with an average of nearly 20 years industry

experience. Carlson is a 24/7 service organization. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Diesel Fuel Storage Tank Filter Preheater Stops Gelling (L-R): Hugh Goulding, executive secretary; Tom Smith, president; Robert Sloan, second year director; Adam Tschetter, vice president; and Wally Savage, treasurer, during IED’s 48th Annual Christmas Reception and Installation of Officers. Not pictured are Tom Novak, 2104 president, and Jeff Schmitt, associate director.

IED Installs New Officers Newly elected president Tom Smith opened Illinois Equipment Distributors’s 48th Annual IED Christmas Reception and Installation of Officers on Dec. 5 at the Seven Bridges Country Club in Woodridge, Ill. “We thank Tom Novak outgoing president for his leadership in 2014,” said Smith, who was the organization’s vice president for 2014. The newly elected board was recognized as follows: • President: Tom Smith, National Lift Truck • Vice president: Adam Tschetter, Pattern

Industries • Treasurer: Walter Savage, Roland Machinery • Executive secretary: Hugh Goulding, E TIP Inc. • First year director: Tom Novak, Martin Implement Sales • Second year director: Robert Sloan, Contractors Equipment Rentals During the reception, Smith was presented with the IED president’s plaque for his service. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Cold weather impacts operations in many ways. Gelling of diesel fuel plugs up fuel filters and stops engines. Not only is this a problem for operating vehicles and equipment in the field but it also becomes a very basic threat to all operations when the filter on the dispensing pump for the fuel storage tank plugs up. Refueling cannot continue until the plugged filter is replaced. This situation is frequently repeated until the cold weather abates. Mechanics struggle to keep up with the filter changes costing additional labor plus the cost of the replaced filters. E Tip’s universal bulk tank filter preheater was designed to prevent gelling in this vital filter and enable continuous refueling of vehicles and equipment without additives or blended fuel. The bulk tank filter preheater is most needed for above ground bulk fuel storage tanks but even below

ground fuel storage tank filters are affected in extreme cold. The bulk tank filter preheater 120v warms the fuel as it passes through, eliminating the gelling. The thermostat controls the temperature to prevent gelling and maintaining the temperature even in continuous flow. There is no longer a delay in fueling because of a plugged filter from gelling. This preheater fits filters that are 4 in. (10 cm) diameter by 10 in. (25.4 cm) tall. It is held in place by three springs and nylon ties and is easy to install and remove. Priced at $225.00, it is covered with a three year warranty. Quantity discounts are available. For more information, call 800/530-5064 or visit www.etipinc.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Keep Up With All the Industry News Subscribe to

Construction Equipment Guide Today! Toll Free

800/523-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 27

2005 CAT D8T, Stk# 541, 9302 hrs, e/rops, a/c, heat, u/c 50% ............................$229,000 PHONE

KENNY ACTON

(812) 282-2800

(502) 639-4168

(812) 282-2882 FAX 6104 Sable Mill Court, Jeffersonville, IN 47130

2006 CAT 330DL, 7056 hrs, a/c, u/c 65%, New Hyd Pump..........................................$112,000

2005 KOMATSU PC400 LC-7, Stk #518, 7211 hrs, a/c, heat, plumbed ............$129,000

2007 DEERE 400D, Stk #646, 7655 Hrs, 6WD, A/C, Tailgate ............................$159,000

PRICE REDUCED EQUIPMENT SPECIALS 2006 Komatsu PC300LC-7, 5973 hrs, a/c, heat, e/rops, u/c 40%, Stk #428 ............................................................$119,000 2005 Komatsu PC400LC-7, 8145 hrs, a/c, heat, aux hyd, u/c 80%, Stk#357 ............................................................$107,000 2009 Liugong CLG922, 2731 hrs, heat, a/c, u/c 60%, thumb, Stk #568 ......................................................................$69,000 2009 Liugong CLG936, 1830 hrs, A/C, heat, plumbed, u/c 80%, Stk #660 ............................................................$119,000 2006 Cat D8T, 9820 hrs, heat a/c, e/rops, u/c 90%, Stk#647 .. ....................................................................................$259,000 2005 Rosco RB48, 1946 hrs, e/rops, Stk #675............$18,000 2008 Liugong 842llTC, 2312 hrs, a/c, heat, 80% rubber, 2 avail........................................................................$59,000 EA. 2005 Terex TA27-G7, 6695 hrs, e/rops, heat, a/c, 6x6 truck, 2 avail........................................................................$63,000 EA. 2005 Deere 300D, a/c, heat, 6596 hrs, tailgate, rubber 65%, Stk#418 ......................................................................$109,000 2010 LaBounty 2000R, 500 hrs, 3rd member hydraulic processing shear................................................................$79,000

Ask about our GPS Machine Control Equipped Dozers, Graders & Excavators www.JobRentals.com

PAVERS / ROAD WIDENERS GOMACO GT9500 - ’14 283 Hrs 14’8” Mining Head, Front Lift Arms, Extended Sensor Boom, High Pressure Water System ........................................................P.O.R. MAULDIN 1550C - ‘09, 1533 Hrs, Track, Conveyor Feed, #C000620, S/N 2138..$54,600 MAULDIN 1750C - ‘09, 2655 Hrs, Track, Conveyor Feed, 8-16’, #C000670 ......$43,950 NEAL CART PATH PAVER - ‘08, 638 Hrs, 5’-8’ Screed Conveyor Feed, #61886A, S/N 03-0608 ............................................................................................................$32,500 MIDLAND SPR6 - ‘13, 381 Hrs, RIGHT HAND DISCHARGE, #C000040, S/N 212 P.O.R. CALL items may be on rent causing pricing and hours to vary.

MILLING MACHINES WIRTGEN W50DC - ‘13 • 20” Cut, Deep Cut Machine, 3 Wheel, Rear Discharge Mill, 236 Hrs.. ........................................................................................................................$214,950

ROLLERS

STOPS FUEL GELLING NEW: The Universal Filter Preheater is designed for diesel fuel filter housings, for lube oil and hydraulic filters too (specify hyd. size). It wraps around the filter housing and reduces or eliminates the possibility of cold weather fuel gelling stopping the engine. It is easily removable and transferable and is wired for your choice of: direct current or alternating current or a convertible model combining dc and ac. A standard 12V or 24V Universal Fuel Filter Preheater is priced at $138. The ‘peel & stick’ Universal Preheater attaches to the bottom or the side of the oil pan and converts the housing into a heat transfer element. It warms the oil without burning it making cold starts easy. It can be used on gearboxes, transmissions, transfer cases, water tanks and even bulk oil tanks. The Preheater plugs into any 120 or 240 volt outlet and consists of a thin silicone fiberglass pad containing a metal grid. To install it, you clean an area on the bottom or side of the oil pan and press the pad onto it, then use silicone to seal the edges of the pad and place a flexible ceramic insulation pad over it. It is available in several models depending on the lube capacity. A 50 watt unit sells for $44 and a 350 watt unit sells for $133.

INGRAM 315 - 4 to Choose from, 3 Wheel Static Roller, s/n & Hrs Available .................. ......................................................................................................................$26,500 Ea. SAKAI SW850-2 - ‘11, 500 Hrs, 79” Double Drum Vibratory Roller, #61870A, S/N 50152....................................................................................................................P.O.R. SAKAI SW880 - ‘12, 295 Hrs, 79” Double Drum Vibratory Roller, #61938A, S/N 10142 ..............................................................................................................................P.O.R. SAKAI SW300 - ‘13, 55 Hrs, 40” Double Drum Vibratory Roller, #C000211, S/N 40156 ..........................................................................................................................$33,950 SAKAI SW502 - ‘13, 393 Hrs, 51 inch drum 9000 lb remaining std and or eptw warranty, #C000212 ................................................................................................$41,974 *Comes with any remaining standard and 3 year extended power train warranty.

EXCAVATORS GRADALL XL4100 - ‘94, 8368 Hrs, Working as is, #C000386, S/N 414218 ......$19,500 GRADALL XL4100 - ‘98, 8884 Hrs, Workable, as is, #62013A, S/N 413282 ......$25,000 GRADALL XL4100 - ‘02, 7745 Hrs, Good Machine, #C000402, S/N 411552......$42,500 GRADALL XL4100 - ‘02, 7068 Hrs, Call on this One, S/N 415548......................$53,950

Contact Marty in Illinois

1-800-307-0221

mahrendt@finkbinerequipment.com Photos & Detail Descriptions visit: www.finkbinerequipment.com

Page 28 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 29

SOLD 2014 Ram 3500

2015 Ram 2500

Cab & Chassis, Knapheide 9.6’ Box, Tool Box, Hitch, HD Hemi, Plow Package, Auto, T/C

Std. Cab PW/PL/T/C, Auto, HD Package, 6.4 V8, 8’ Blizzard Plow, Back Up Camera

MSRP $45,750

MSRP $47,576

MSRP $48,965

Fall Special $37,999*

Fall Special $38,599*

Fall Special $39,999*

Ram 3500 plus Plow

YEAR END TAX $AVING$ Hurry Before They Are Gone!

Diesels Here

Ram 3500

Promaster

Cab & Chassis Crew

MSRP $34,965

Fall Special $29,999*

Booth #’s: 1149 & 1151

MSRP $51,300

Fall Special $42,999* Choose from 32

Tows 20,800#’s Only 1 Left!

Diesels Here

2013 Ram 3500 Crew 4x4 Dually AIS A/T 850 Cummins P/W, P/L, T/C, A/C, Bedliner

MSRP $53,930

Fall Special $44,113*

#1 Chrysler Corp. Commercial Dealer in Minnesota

The fast lane for small business.

2015 Ram Caravan Cargo

Promaster 1500

P/W, P/L, T/C, A/C

FWD V/6 Auto, P/W, P/L, T/C, A/C

MSRP $23,310

MSRP $31,025

Fall Special $18,499*

Fall Special $28,579*

RAM H.D. HEADQUARTERS

18 Cabs and Chassis in Stock More Coming!

We Deliver! 32 Promasters

Ready to Go! FURY MOTORS South St. Paul, Minnesota Truck Master Dick Reineck • 651.251.8214 direct • rreineck@furymotors.com * Pricing represents all Denver business center rebates deducted!

Page 30 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WE VULCANIZE

Mike Stanczak to Retire From Hanson Material Service After Over 40 Years After more than 40 years of dedicated service with Lehigh Hanson and its predecessor companies, Michael “Mike” Stanczak Sr. vice president and general manager of the Midwest Materials area in the north region, has decided to retire at the end of the year. Stanczak’s tenure with the company began in 1974 when he accepted a finance position with what was then Material Service Corporation. After holding a number of sales management positions, he was promoted to vice president of sales in 1992, a position held until he was appointed president and CEO of Material Service Corporation in 1999. Following Hanson’s acquisition of Material Service Corporation in 2006, Stanczak was named regional president. He was appointed to his current position in 2008. Over the years, Stanczak’s leadership and knowledge of the aggregates business has been invaluable, according to the company. In addition to his

IAAP President Bryan Hood (C) recognizes Mike Stanczak (L) for his 18 years of service on IAAP Board. along with John Henriksen.

many contributions to Lehigh Hanson, Stanczak has held key roles in several industry associations and is wellknown in the Chicago business community. He is the past president of the Illinois Association of Aggregate Producers and currently serves on its board of directors. IAAP President Bryan Hood recently recognized Stanczak for his 18 years

of service on IAAP Board. Stanczak also serves on the executive committee of the Better Business Bureau of Chicago and Northern Illinois, and the executive committee of the National Stone, Sand and Gravel Association. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 31

THE BEAST BRINGS EVERYTHING YOU NEED TO GET THE JOB DONE. Tame your toughest jobs with the raw power of KOBELCO excavators. With features like an exclusive independent travel system, operator controlled power boost and a heavy-duty cooling system, you can count on KOBELCO to get more done in less time. Plus, premier operator comforts and industry leading visibility mean you’ll actually enjoy operating these machines.

KOBELCO Premium Protection Plan Up to 84 months of full machine coverage.

KOBELCO-USA.COM

Page 32 â&#x20AC;˘ December 20, 2014 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

WHATEVER IT TAKES TO GET THE JOB DONE RIGHT MAGNETS â&#x20AC;˘ GRAPPLES â&#x20AC;˘ SCRAP SHEARS â&#x20AC;˘ CLAMSHELL BUCKETS CONCRETE DEMOLITION â&#x20AC;˘ ROCK + LOG GRABS â&#x20AC;˘ DYNASET ACCESSORIES Magnets

Concrete Demolition

Grapples

Products for the Rail Industry

Bucket Crusher for Rock & Concrete Clamshell Buckets

Dynaset Hydraulic Accessories Scrap Shears

GENSCO AMERICA, INC. ACROSS USA 800-268-6797 â&#x20AC;˘ 5307 Dividend Dr., Decatur, Georgia 30035 â&#x20AC;˘ 770-808-8711 â&#x20AC;˘ Fax: 770-808-8739

GENSCO EQUIPMENT (1990) Inc. 53 Carlaw Ave., Toronto, Canada M4M 2R6 â&#x20AC;˘ 416-465-7521 â&#x20AC;˘ Fax: 416-465-4489 â&#x20AC;˘ email: info@genscoequip.com â&#x20AC;˘ www.genscoequip.com

FACTORY-DIRECT Sales & Rental - CHICAGO BRANCH Chicagolandsâ&#x20AC;&#x2122;s COMPLE COMPLETE TE FactoryFactor yDirect Rental Resource Â&#x201E; /DUJHVW VHOHFWLRQ RI 86$ PDGH Â&#x201E; VKLHOGLQJ VKRULQJ HTXLSPHQW Â&#x201E; &XVWRP VKLHOGV EXLOW WR \RXU VSHFV Â&#x201E; Â&#x201E; Â&#x201E; 6LWH 6SHFLÂżF (QJLQHHULQJ Â&#x201E; Â&#x201E; 6XSSRUW IURP (IÂżFLHQF\ 3URGXFWLRQÂśV Special Operations Shoring Division. Â&#x201E; Â&#x201E; 26+$ 7UHQFK 6DIHW\ 7UDLQLQJ

6WHHO 7UHQFK 6KLHOGV 6WHHO 7UHQFK 6KLHOGV

% %XLOG $ %R[Â&#x152; XLOG $ %R[Â&#x152;

( &DVV 6W -ROLHW ,/ 815-893-6700 )D[

ZZZ HIÂżFLHQF\VKRULQJ FRP Z ZZ HIÂżFLHQF\VKRULQJ FRP

6OLGH 5DLO 6\VWHP 6OLGH 5DLO 6\VWHP

2IÂżFLDO (IÂżFLHQF\ 3URGXFWLRQ )DFWRU\ 'LUHFW 6DOHV 5HQWDOV &RPSDQ\

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 33

Page 34 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

PUT THE POWER OF TITAN to work for you

PARTS • SERVICE • RENTALS • SALES

855-44TITAN titanmachinery.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 35

Mid Country Machinery (800) 206-5936

3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302 4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710 106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470

www.midcountrymachinery.com

2014 Caterpillar D6T XL, 13 Hrs, Multiple-Shank Rear Ripper, Accugrade Ready, 6SU Blade ......................................$350,000

2013 Kawasaki 95Z-7, 259 Hrs........................................$CALL

2014 Kobelco SK500LC-9, Hydraulic Counter Weight, Pattern Control Changer, Air Seat ..................................................$CALL

EXCAVATORS

COMPACTORS

2014 KOBELCO SK500 LC-9, EROPS, A/C, 2 Hrs ....................................................................................$CALL 2014 KOBELCO SK350 LC-9, Wounded Warrior Unit................................................................................$CALL 2014 KOBELCO SK210 LC-9, EROPS, A/C, 4 units ..................................................................................$CALL 2014 KOBELCO ED160, EROPS, Aux Hyd., 64 Hrs ..................................................................................$CALL 2014 SANY SY235C, EROPS, A/C, Heat, 14 Hrs ..................................................................................$159,500 2013 KOBELCO SK295 LR-9, EROPS, Long Reach ..................................................................................$CALL 2013 KOBELCO SK260 LR-9, EROPS, Long Reach ..................................................................................$CALL 6-2015 KOBELCO SK210’s ........................................................................................................................$CALL 2013 KOBELCO SK210 LC-9, EROPS, 1 Left ............................................................................................$CALL 2013 KOBELCO SK140 SR, EROPS, Blade, Aux Hyd ................................................................................$CALL 2013 SANY SY215C, EROPS, A/C, Heat, 521 Hrs ................................................................................$135,000 2013 SANY SY135C, EROPS, A/C, Heat, 213 Hrs ..................................................................................$96,000 2012 KOBELCO SK350 LC-9, EROPS, A/C, 725 Hrs ............................................................................$248,000 2012 KOBELCO SK260 LC-9, EROPS, A/C, Heat, 842 Hrs ..................................................................$167,500 2012 KOBELCO SK140 SRLC, EROPS, A/C, 154 Hrs ..........................................................................$128,500 2012 KOBELCO SK210 LC-9, EROPS, A/C, 1222 Hrs ..........................................................................$122,500 2010 DEERE 200D LC, EROPS, Aux Hyd., A/C, 4183 Hrs ........................................................................$CALL 2008 KOBELCO SK210, EROPS, Man. Thumb, 2140 Hrs ....................................................................$105,000 2007 KOBELCO SK350 LC-8, EROPS, A/C, 5599 Hrs ..........................................................................$105,000 2007 KOBELCO SK250, EROPS, A/C, Heat, 4622 Hrs ..........................................................................$120,000 2006 HITACHI ZX120, EROPS, A/C, Heat, 3175 Hrs ..............................................................................$68,500 2005 KOBELCO SK250, EROPS, A/C, Heat, 4419 Hrs ............................................................................$70,000 2005 KOBELCO SK160 LC, EROPS, A/C, Heat, 2400 Hrs ......................................................................$67,500

2010 VIBROMAX VM46 PD, OROPS, 55” Pad, 353 Hrs ........................................................................$46,500 2010 CAT CD54, EROPS, 67” Smooth Double Drum ..........................................................................$105,000 2008 CAT CP56, OROPS, 84” Pad Foot, 1502 Hrs ................................................................................$89,000 2008 CAT CP56, OROPS, 84” Pad Foot, 1467 Hrs ................................................................................$87,000 2007 DYNAPAC CA150 PD, OROPS, 66”, 380 Hrs ................................................................................$55,000 2007 DYNAPAC CA250 PD, OROPS, 84”, 2249 Hrs ..............................................................................$57,500 2006 CAT CP563E, OROPS, 84” Pad Foot, 6300 Hrs ................................................................................$CALL 2006 IR SD70D, OROPS, Smooth Drum ................................................................................................$39,000 2005 HAMM 3307, OROPS, 66” Smooth Drum, 1719 Hrs ....................................................................$39,500 2004 HYPAC C832C, OROPS, 66” Pad Foot, 1410 Hrs ..........................................................................$33,500 2001 IR SD100F, OROPS, 84” Pad Foot, 2104 Hrs ..................................................................................$CALL 2001 CAT CP323C, OROPS, 48” Pad Foot ................................................................................................$CALL 1998 HYPAC C850C, OROPS, 84” Smooth Drum ..................................................................................$32,000

LOADER / BACKHOES 2011 JCB 3C-14, EROPS, A/C, Heat, 874 Hrs ........................................................................................$62,500 2008 CASE Super M, EROPS, Aux Hyd., Ex-hoe, 4 units ......................................................................$52,500 2007 NEW HOLLAND B95, EROPS, Pilot Controls, A/C ........................................................................$22,000 2001 DEERE 410G, EROPS,4x4, Extendahoe, 7871 Hrs ..........................................................................$CALL 1998 DEERE 310SE, EROPS, Heat, 6839 Hrs ........................................................................................$28,000 1996 NEW HOLLAND 555D, EROPS, Heat, A/C ........................................................................................$CALL

FORKLIFTS 2013 SKYTRAK 10054, EROPS, FF Tires, 810 Hrs ..............................................................................$118,000 2013 SKYTRAK 8042, EROPS, FF Tires, 794 Hrs ..................................................................................$86,500 2012 SKYTRAK 10054, EROPS, FF Tires, 2034 Hrs ............................................................................$102,500 2007 SKYTRAK 8042, OROPS, FF Tires, 2588 Hrs ................................................................................$55,000 2006 GEHL RS5-34, OROPS, 2357 Hrs..................................................................................................$35,000 2006 GEHL DL10H-55, OROPS, 1574 Hrs ............................................................................................$42,000 2006 SKYTRAK 8042, OROPS, FF Tires, 2373 Hrs ................................................................................$55,000 2005 SKYTRAK 6042, OROPS, 4x4, 2773 Hrs ......................................................................................$42,000

SKID LOADERS 2014 Kubota SLV90-2, EROPS, Rubber Tracks, 2 units............................................................................$CALL 2013 CAT 262D, EROPS, A/C, Aux Hyd., 50 Hrs ......................................................................................$CALL 2013 CAT 252B3, EROPS, A/C, Heat, 3 units avail ................................................................................$37,500 2012 CAT 289C2, EROPS, A/C, Rubber Tracks, 2 units..........................................................................$72,000 2006 Mustang 2044, OROPS, 361 Hrs ....................................................................................................$CALL

WHEEL LOADERS 2014 KAWASAKI 80Z7, EROPS, A/C, Ride Control ..................................................................................$CALL 2014 KAWASAKI 70Z7, Ride Control, QC, A/C, 74 Hrs ............................................................................$CALL 2013 KAWASAKI 95Z7, EROPS, A/C, Heat, 255 Hrs ............................................................................$425,000 2013 CAT 924K, EROPS, QC, 3rd Valve Hyd., 2 units ..........................................................................$155,000 2012 KAWASAKI 90Z7, Ride Control, A/C, Heat, 842 Hrs ....................................................................$265,000 2011 KAWASAKI 65ZV-2, EROPS, A/C, Heat, 3759 Hrs ........................................................................$87,500 2011 CAT 928HZ, EROPS, A/C, Heat, 340 Hrs ....................................................................................$129,000 2011 DEERE 544K, EROPS, A/C, Heat, 975 Hrs ..................................................................................$138,000 2011 KOMATSU WA 200-6, EROPS, A/C, 858 Hrs....................................................................................$CALL 2010 CAT 924H, EROPS, A/C, QC, Heat, 1293 Hrs ..............................................................................$118,000 2009 CAT 930H, EROPS, A/C, Ride Control, 881 Hrs ..........................................................................$139,000 2006 DEERE 644J, EROPS, A/C, Heat, 8323 Hrs ..................................................................................$87,000 2006 KOMATSU WA250-5, EROPS, A/C, Heat, 4749 Hrs ......................................................................$87,000 2002 DEERE 644H, EROPS, A/C, Heat ..................................................................................................$68,000 2001 CAT 950G, EROPS, A/C, Ride Control, Heat ..................................................................................$79,000 2000 DEERE 544H, EROPS, A/C, Heat ................................................................................................$130,000 1980 DEERE 644C, EROPS, Heat ..............................................................................................................$CALL

DOZERS 2013 DEERE 550K XLT, EROPS, 6 way, 776 Hrs ..................................................................................$115,000 2012 CAT D6K XL, EROPS, 6 way, A/C, 1971 Hrs ....................................................................................$CALL 2012 DEERE 850KWT, EROPS, SU Blade, 899 Hrs ..............................................................................$285,000 2011 CAT D6T XL, EROPS, Rear Screen, Winch ......................................................................................$CALL 2011 CAT D3K XL, EROPS, 6 way, 16” Pads ............................................................................................$CALL 2011 KOMATSU D65-16, EROPS, SU Blade, 3366 Hrs ........................................................................$170,000 2011 CAT D6T XW, EROPS, Heat, A/C, 3479 Hrs ................................................................................$193,000 2009 CAT D6T XW, EROPS, SU Blade w/tilt, 4571 Hrs ........................................................................$215,000 2008 CAT D6T LGP, EROPS, Aux Hyd., Heat, 4970 Hrs ......................................................................$190,000 2008 CAT D6T XL, EROPS, SU Blade, Ripper, 4731 Hrs ......................................................................$186,500 2008 CAT D6T XL, EROPS, SU Blade, A/C, 4787 Hrs ..........................................................................$195,000 2008 KOMATSU D65EX-15EO, EROPS, Winch, 5029 Hrs ....................................................................$119,500 2007 CAT D6T LGP, EROPS, St. Bld w/tilt, 1911 Hrs ..........................................................................$187,000 2006 CAT D6R XLIII, EROPS, 6 way, Sweeps, 6864 Hrs......................................................................$142,500 2005 CAT D6R XLII, EROPS, SU Blade, 7560 Hrs................................................................................$123,500 2005 CAT D6R XWII, Aux Hyd., Sweeps, A/C, 8796 Hrs ......................................................................$130,000 2005 DEERE 650J, OROPS, 6 way, S.A.L.T., 1478 Hrs ..........................................................................$55,000 2005 DEERE 450J LGP, OROPS, 6 way, 3933 Hrs ................................................................................$43,500 2004 CAT D6R XWII, EROPS, A/C, Drawbar, 12,845 Hrs ....................................................................$117,500

Page 36 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 37

Visit us at: www.amstate.com

AMERICAN 5300 70 TON CRAWLER CRANE

GROVE TM9120 TRUCK CRANE

YOUR AUTHORIZED DEALER

in WISCONSIN and UPPER MICHIGAN for: GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS • LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLER CRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/ JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAG CRUSHERS • MANITOWOC CRANES

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT

What’s going on in YOUR COMPANY

We want to know! Give us a call.

Construction Equipment Guide

(800) 523-2200 OR

FAX:

(215) 885-2910

ALLIS 500-SD PORTABLE CONE CRUSHER, 300 HP electric motor, rear feed conveyor, side discharge conveyor, motor control panel, tri-axle, hydraulic leveling ................................................................................................$130,000 JCI/FABTEC 6’X20’ TD DUAL SCREEN PLANT, (2) 30” reversing conveyors under primary screen, 60” conveyor under secondary screen, (3) 42” cross conveyors (6) hydraulic leveling jacks, motor control panel ............$182,500 JCI K-300 “KODIAK” PORTABLE CONE PLANT, 300 hp electric motor, 36”x 20’ side discharge conveyor, 36”x 35’ feed conveyor, motor control panel, hydraulic leveling......................................................................................$375,000 POWERSCREEN 510 COMMANDER RINSER SCREEN PLANT, 11.8 Yd. hopper with hydraulic dump grizzly, 36” feed conveyor, 5x10 3-Deck screen, tandem axle, Deutz diesel ..................................................................................$52,400 METSO/NORDBERG MODEL HP300 CLOSED CIRCUIT PORTABLE CONE PLANT, with a 6'x20' Triple Deck Screen. 2003 Model Year ................................................................................................................................................$360,000

EXCAVATORS LIEBHERR R974B HDSL UTILITY CRAWLER EXCAVATOR, Powered by a 471 HP Liebherr D9408TI Diesel, 33’11” Semi-Gooseneck Boom with 15’5” Stick, 5 cu yd HD Bkt, 21’x14’ 4” Wide U/C with 30” Track Pads and Removable Sideframes, Approx. 190,000 Lb. Working Weight ....................................................................CALL

CRANES GROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom, 32’ to 56’ Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work ....................................$155,900 GROVE TM9120 100 TON TRUCK CRANE, 1997, 42’ to 130’ boom, 33’ to 58’ offsettable telescopic swingaway, Grove HO50 main & aux. hoists, LMI, Cummins 6CT8.3 diesel, mounted on a Grove 8 x 4 chassis with a Cummins N14 diesel and Roadranger transmissions. Tandem boom dolly ....................REDUCED TO $299,000 GROVE RT855B 55 TON ROUGH TERRAIN CRANE, 1995, with Cummins diesel, 37’ to 115’ boom, 35’ to 60’ swingaway, LMI, Grove model HO30 main & aux. hoists, 29.5x25 tires ..............................................$159,500 AMERICAN 5300, 1988, 70 Ton Crawler Crane, Cummins w/3 Stage Converter, CLL on One Drum, Third Drum, Independent Travel, 130’ Boom, 30’ Jib ................................................................................................$155,000

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Lanny Peterson at:

lpeterson@amstate.com or mobile 1-715-574-8089 or 1-800-242-7113

Page 38 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

THE MUST-ATTEND EVENT FOR AUTHORIZED EQUIPMENT DEALERS & THE INDUSTRY’S TOP SUPPLIERS IS BACK AND BETTER THAN EVER! FEATURING A NEW FOCUS ON DISTRIBUTOR SPECIFIC EDUCATION,EXPANDED NETWORKING OPPORTUNITIES & AN UPDATED OUTLOOK ON INDUSTRY TRENDS.

For all your equ equipment ipment needs Ŷ Clean, well maintained rental fleet Ŷ Ŷ Extensive inventor inventoryy of new and used equipment CONSTRUCTION EQUIPMENT AND MORE

Loader backhoes

Excavators

Wheel loaders

Contact the Southeastern Equipment location nearest you today! Kentucky

Michigan

Ohio

Compact excavators

Compact track loaders

s Street sweepers s Asphalt distributors s Chipspreaders s Recyclers s Stabilizers s Pavers s Wood chippers s Sewer trucks s Hydro excavators

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 39

ILLINOIS

Finkbiner Equipment www.finkbinerequipment.com CHICAGO (630) 654-3700 (800) 307-0221 INDIANA

RECO Equipment, Inc. www.recoequip.com INDIANAPOLIS (317) 781-8100 IOWA

Rexco Equipment Inc. www.rexcoequip.com CEDAR RAPIDS DAVENPORT (319) 393-2820 (563) 381-1200 DES MOINES (515) 287-4910 KENTUCKY

RECO Equipment, Inc. www.recoequip.com FLORENCE (859) 727-7970 MINNESOTA

American State Equipment www.amstate.com MINNEAPOLIS/ ST. PAUL (651) 464-0996 (612) 849-6332

DULUTH (218) 260-0581 (800) 236-6900

NEBRASKA

Rexco Equipment, Inc. www.rexcoequip.com GRETNA (402) 332-5585 OHIO

RECO Equipment, Inc. www.recoequip.com BELMONT (740) 782-1314

MONROE (513) 539-5255

RICHFIELD (330) 659-0800

COLUMBUS (614) 276-0001

liebherr.com

WISCONSIN

American State Equipment

WAUSAU (715) 675-6900 (800) 242-7113

When you need to move dirt and rock quickly, you need our R 936 crawler excavator. Advanced electronics let drive components work together efficiently to save fuel. Sensor-guided controls give you speed, precision and power. And robust cast steel components stand up to the toughest environments. It’s all built to last with exclusive Liebherr components.

We haven’t compromised on anything; why should you?

PERRYSBURG (419) 874-6001

www.amstate.com MILWAUKEE (414) 541-8700 (800) 236-6900

NEVER SETTLE.

LITTLE CHUTE (920) 788-6646 (800) 236-8318

Page 40 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Lake Panorama Upgrades to DSC Barracuda Class Dredge The Lake Panorama Rural Improvement Zone, located in Panora, Iowa, about 45 minutes west of Des Moines, recently upgraded its dredging equipment to a new DSC Barracuda Class dredge and 16-in. (40 cm) floating booster unit. Lake Panorama is the largest private lake in Iowa, with 1,400 acres of lake surface, more than 30 mi. of shoreline, 1,000 homes and approximately 200,000 to 300,000 cu. yd. (152,911 to 229,366 cu m) of silt to dredge each year. The Barracuda Class Dredge is a swinging ladder dredge that can also be operated conventionally by locking the ladder in place and pivoting on the stern spud, using swing wires and anchors, which increases the cut width and dredging efficiency. Since 1999, the Lake Panorama Rural Improvement Zone and Lake Panorama Association have partnered to use a DSC Barracuda Class dredge to maintain the depth and health of the lake. The recent upgrade added a booster unit to the operation, as well as more modern technology and equipment. “We’re in a rural part of the state and this lake does a lot for the local economy during

The Barracuda Class Dredge is a swinging ladder dredge that can also be operated conventionally by locking the ladder in place and pivoting on the stern spud, using swing wires and anchors, which increases the cut width and dredging efficiency.

The Lake Panorama Rural Improvement Zone, located in Panora, Iowa, about 45 minutes west of Des Moines, recently upgraded its dredging equipment to a new DSC Barracuda Class dredge and 16-in. (40 cm) floating booster unit.

the warmer months, so it’s important that we keep it viable,” said John Rutledge, general manager of the Lake Panorama Association. “We chose features for the dredge and booster to accommodate the specific sediment removal needs of our river-fed lake. Additionally, hospital grade mufflers were specified to ensure the dredge was not a nuisance to the residents of our community.” The dredge is kept upstream in a restricted area during the peak lake season, in order to keep the dredge pipe from becoming a hazard in the recreational boating areas. Upstream, the water access is undeveloped and surrounded by marginally effective farmland Lake Panorama either acquires or leases to deposit the silt. For the first 15 years

of dredging, Lake Panorama did not require a booster unit because the pipeline transferred spoil to nearby silt retention areas. Over the years, as the association built silt basins farther away from the dredge, the changing pump curve created the need for a booster. “The addition of a booster station will help keep our operations efficient. We’re pumping around 7,500 feet with 90 feet of head, and the booster provides the necessary head to pump that distance,” said Rutledge. While the Rural Improvement Zone chose the DSC Barracuda Class dredge as a base unit, it included additional features, which provided a customized dredge specific to its unique application. Customizations includ-

Lake Panorama is the largest private lake in Iowa, with 1,400 acres of lake surface, more than 30 mi. of shoreline, 1,000 homes and approximately 200,000 to 300,000 cu. yd. (152,911 to 229,366 cu m) of silt to dredge each year.

ed: • Closed circuit television system (CCTV), utilizing special day and night cameras, allowing the dredge operator to closely monitor all aspects of the dredge operation. • Magnetic Flow Meter System and Pump Speed Automation, which automatically raise and lower the speed of the Metso Minerals Thomas dredge pump to maintain

a steady slurry velocity in the discharge pipeline. • Gatling Gun rotating suction screen, which prevents oversized material from entering the dredge suction and reduces and/or completely eliminates frequent shutdowns to remove obstructions from the dredge pump’s impeller. • Hospital-grade silencers installed on the see PANORAMA page 88

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 41

TOLL FREE

855-575-LUGS(5847)

or 913-947-3934

www www.bairproducts.com .bairproducts.com Email: info@bairpr info@bairproducts.com oducts.com

CAT / ASV / TEREX PA PARTS Go Go Got ot Lug LLu Lugs? ug gss??

Factorry

Bai ’ A l

Bolt-On Replacement Track Drive Lugs • Bolt-On Wheel Replaces Older Hub Style Wheels • 100% Larger Axle Shaft • Greaseable/ Preload Adjustable • CAT 247/257, ASV/TEREX 30/50/60 Models

RE REPLACEMENT PLACEMENT DRIVE DRIVE CARRIER CARRIER PARTS PARTS

AVAILABLE SEPTEMBER 2014 • 25% Thicker Steel Backing Plate Plates es & Sprocket Base • Greaseable Carrier Unit

S SUPER UPER 22-BOLT -BOLT - ON ON WHEEL WHEEL KIT KIT

H HYDRAULIC YDRAULIC TRACK TRACK INSTALLATION INSTALLATION KIT KIT

CAT AT 247/257/ 247/257/267/277/287 5 ASV / Terex 50/60/85/100

t ͛s 'Kd zKh Ks Z ͘ tĞƐƚ ^ŝĚĞ WD WůƵƐн dŽƚĂů ĂƌĞͶtĞƐƚ ^ŝĚĞ dƌĂĐƚŽƌ͛Ɛ ŶĞǁ ĐƵƐƚŽŵŝǌĂďůĞ ŵĂĐŚŝŶĞ ƐƵƉƉŽƌƚ ƐŽůƵƟŽŶͶ ďƵŶĚůĞƐ ƉƌĞǀĞŶƚĂƟǀĞ ŵĂŝŶƚĞŶĂŶĐĞ͕ ĞǆƚĞŶĚĞĚ ǁĂƌƌĂŶƚǇ ĂŶĚ ŵĂĐŚŝŶĞ ŵŽŶŝƚŽƌŝŶŐ ƚĞĐŚŶŽůŽŐǇ͘ dŚƌĞĞ ďƵŶĚůĞƐ ŽĨ ƉƌŽƚĞĐƟŽŶ ƚŽ ĐŚŽŽƐĞ ĨƌŽŵ͕ ŽŶĞ ůŽǁ ƉĂǇŵĞŶƚ͘

dŚĞ :ŽŚŶ ĞĞƌĞ ŽŶƐƚƌƵĐƟŽŶ Θ &ŽƌĞƐƚƌǇ ĞĂůĞƌ ĨŽƌ /> Θ /E

A ALLOY LLOY C CENTER E N T ER B BOGIE OGIE WHEELS WHEELS

AVAILABLE A VAILABLE SEPTEMBER SEPTEMBER R 2014 2014

• Install rubber tracks fast with Hydraulic Tools • Fits most CAT/ASV/TEREX Compact Loaders

• Bair Part #BW9F Flange Wheel • CAT 277 / 287 D SERIES • TEREX / ASV SR G/110 & PT 75/80/100G/110 MACHINES

Page 42 â&#x20AC;¢ December 20, 2014 â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ CONSTRUCTION EQUIPMENT GUIDE

#"/$)"3% 64& % & 26* 1.& /5

#M BODIBS E.BDIJ OFS Z DPN 6T FE

800-333-5993 Bill Musgrave Ext. 2210 bmusgrave@altorfer.com Corporate Office Cedar Rapids, IA.

Locations in Iowa, Illinois & Missouri BUY â&#x20AC;¢ SELL â&#x20AC;¢ CONSIGN â&#x20AC;¢ RENT

Complete inventory & photos at:

www.altorfer.com

2009 Cat 312DL, S/N JBC00684, 142U177, 2209 Hrs ........ ......................................................................................$94,050

2006 Cat 324DL, S/N JJG00216, 142U105, 7596 Hrs .... ..............................................................................$79,750

2011 Cat 305.5DCR, S/N FLZ00648, 152U006, 609 Hrs...... ......................................................................................$47,300

2003 CAT 232, S/N CAB00656, 146U084, 3069 Hrs ............ ......................................................................................$15,400

2000 Cat D6RXL, S/N 5LN02680, 141U083, 9240 Hrs ........ ......................................................................................$99,000

2006 Cat D6RLGP, S/N WRG00342, 141U030, 6749 Hrs .... ....................................................................................$145,750

2003 Cat 140H, S/N 2ZK07998, 148U013, 10,111 Hrs ........ ....................................................................................$104,500

2005 Cat 972G, S/N AWP00417, 144U092, 5535 Hrs.......... ....................................................................................$160,000

2011 Cat 279C, S/N MBT01783, 146U038, 3343 Hrs .......... ......................................................................................$37,000

2003 Cat 420D, S/N FDP12905, 145U015, 6022 Hrs .......... ......................................................................................$38,000

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 43

Used Equipment 2014 Bobcat E85

2012 Bobcat E42

Stk# 66263-(L) C/H/A, Rubber Tracks, Hyd. Thumb, Stk# 25287-(A) A91 pkg, C/H/A, Hydraulic Thumb, Long Arm, Hydraulic X-Change, Blade, 24” Bkt, Blade, Bkt, Rental Fleet (Call for Availability) 140 Hrs..............................................................$70,900 Rental Unit (Call for Availability) 1061 Hrs $44,900

From a Name You Can Trust

2012 Bobcat T870

2013 Bobcat T750

Stk# 14660-(S) A91 pkg, C/H/A, Pwr Bobtach, Air Ride, Hi-Flow Hyd, 2 Spd, Roller Susp, Radio, Bkt, 1415 Hrs ....................................................$49,900

Stk# 14624-(S) A91 pkg, C/H/A, Pwr Bobtach, Air Ride, SJC, Roller Susp, Hi-Flo Hyd, 2 Spd, Bkt, 1045 Hrs ....................................................$53,900

2013 Bobcat T590

2013 Bobcat S590

2013 Bobcat S550

Stk# 34343-(L) A91 pkg, C/H/A, Pwr Bobtach, Air Ride, 16” Trks, Radio, Rental Fleet (Call for Availability) 880 Hrs ..................................$40,900

Stk# 14545-(A) A71 pkg, C/H/A, Pwr Bobtach, ACS, Air Ride, Roller Susp, 16” Trks, Rental Fleet (Call for Availability) 1248 Hrs............................$38,900

Stk# 54013-(L) A91 pkg, C/H/A, Pwr Bobtach, Air Ride, Hi-Flo Hyd, ACS, 2 Spd, Bkt, 220 Hrs ............ ..................................................................$36,300

Stk# 12616-(S) pkg, C/H/A, Pwr Bobtach, Susp Seat, 2 Spd, NEW Tires, Bkt, 849 Hrs ........$29,500

2013 Kubota KX080

Stk# 52323-(S) C/H/A, Blade, Rubber Trks, 2 Spd, Bkt, Rental Fleet (Call for Availability) 421 Hrs ........ ..................................................................$85,000

2013 Kubota U55

Stk# 52123-(A) C/H/A, Angle Blade, Hyd. Thumb, Bkt, SP2 (Dual Hyd) Rubber Trks, Rental Fleet (Call for Availability) 988 Hrs..............................$53,900

Anoka (A), MN 888-448-5266 • 763-323-1720

2013 Kubota KX057

Stk# 52358-(S) C/H/A, Blade, SP2 (Dual Hyd.) Rubber Trks, 2 Spd, Rental Fleet (Call for Availability) (Price does not include Grapple) 422 Hrs ..$54,900

2012 Kubota U55

Stk# 15268-(S) C/H/A, Blade, Hyd. Thumb, Rubber Trks, 2 Spd, Bkt, Rental Fleet (Call for Availability) 1200 Hrs ....................................................$49,900

Loretto (L), MN 888-479-4342 • 763-479-8200

2013 Kubota KX057R3

Stk# 27067-(A) Cab-Heat-A/C, Blade, Quick Attach, Hydraulic Thumb, Bkt, Rental Unit (Call for Availability) 400 Hrs ..................................$53,900

2011 Kubota KX121R3TA

Stk# 8474-(S) Cab-Heat-A/C, Rubber Tracks, Hydraulic Thumb, Angle Blade, Bkt, 685 Hrs .......... ..................................................................$45,900

Shakopee (S), MN 877-753-6100 • 952-445-6310

www.lanoeq.com www.lanoequip.com www.lanogardengear.com

2013 Kubota U55

Stk# 34369-(L) C/H/A, Angle Blade, 2 Spd, SP2 (Dual Hyd) Rental Fleet (Call for Availability) (Price does not include Grapple) 842 Hrs ....................$53,900

2011 Kubota KX71

Stk# 27202-(A) ROPS, Quick Attach, Hydraulic Thujb, Blade, Rubber Trks, Bkt, 486 Hrs ....$30,000

Page 44 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GREAT HOLIDAY GIFTS! International TD-25 Dozer, 1:50 Scale - $85

Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50 Scale$85 Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale..........$85 Allis-Chalmers Yellow HD21 Dozer w/Ripper, 1:50 Scale ...... $85 Bobcat E35 Compact Excavator, 1:25 Scale ............................$50 Bobcat E55 Compact Excavator, 1:25 Scale ............................$60 Bobcat M400 Gold Skid Steer Loader, Scale 1:25 ..................$25 Bobcat S175 Skid Steer Loader, 1:25 Scale..............................$65 Bobcat S510 Skid Steer Loader, 1:25 Scale..............................$65 Bobcat S530 Skid Steer Loader, 1:25 Scale..............................$65 Bobcat S550 Skid Steer Loader, 1:25 Scale..............................$65 Bobcat S570 Skid Steer Loader, 1:25 Scale..............................$65 Bobcat T550 Track Loader, 1:25 Scale ......................................$70 Bobcat 225 Compact Excavator, 1:25 Scale ............................$50 Case CX250C Excavator, 1:50 Scale ........................................$195 Case 850B Dozer (NZG), 1:35 Scale..........................................$120 Case 1102 Vibromax Roller, 1:35 Scale....................................$100 Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy Trailer, 1:50 Scale ......................................................................................$100 Caterpillar 775G Off-Highway Truck, 1:50 Scale ....................$110 Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale ............$65 Caterpillar D7E Track-Type Tractor, 1:50 Scale ........................$90 Caterpillar D8N Track-Type Tractor (NzG), 1:50 Scale ..........$150 Caterpillar D8T Track-Type Tractor, 1:50 Scale ......................$110 Caterpillar D9N Track-Type Tractor (NZG 298), 1:50 Scale ....$75 Caterpillar D10N Track-Type Tractor, 1:50 Scale ......................$50 Caterpillar D10 Track-Type Tractor (Conrad), 1:50 Scale......$185 Caterpillar D10T Track-Type Tractor, 1:50 Scale ....................$100 Caterpillar D11N Track-Type Tractor (Conrad), 1:50 Scale ..$185 Caterpillar D11R Track-Type Tractor, 1:50 Scale ....................$100 Caterpillar MH3049 Material Handler w/magnet, 1:50 Scale $150 Caterpillar 323D L Excavator, 1:50 Scale ..................................$90 Caterpillar 336D L Excavator, 1:50 Scale ..................................$95 Caterpillar D350D Articulated Dump Truck, 1:50 Scale ..........$50

Caterpillar D6R Track-Type Tractor, 1:50 Scale - $95

Komatsu PC360LC-10 Excavator, 1:50 Scale - $120

All New in Box CALL Toll Free

800-523-2200 Ext. 197 Caterpillar 215 Excavator (NZG), 1:50 Scale ..........................$140 Caterpillar 365B L Series II Excavator, 1:50 Scale....................$75 Caterpillar 953 Traxcavator, NZG, 1:50 Scale............................$90 Caterpillar 963D Track Loader, 1:50 Scale ................................$60 Caterpillar 988K w/ Grapple, 1:50 Scale ..................................$160 Caterpillar 994H Wheel Loader, 1:50 Scale ............................$215 Demag Tracked Paver (NZG), 1:50 Scale ..................................$75 Doosan Moxy MT31 Articulated Truck ....................................$100 Dynapac SD2500 CS Road Paver, 1:50 Scale ........................$150 Fiat Allis 41B Dozer (Yellow), 1:50 Scale..................................$120 Grove GMK 3050 All Terrain Crane, 1:50 Scale ......................$120 Grove RT750 Rough Terrain Crane, 1:55 Scale......................$100 Grove TM1500 White 12 Axle Truck Crane, 1:50 Scale ........$160 Hamm 3414 Pad Foot Compactor, 1:50 Scale ..........................$90 International 175 Crawler Loader, 4in1, 1:50 Scale..................$65 International 433 Dual Engine Pay Scraper, 1:25 Scale........$225 International TD-14 Crawler Dozer, 1:16 Scale ......................$150 International TD-15 Dozer w/Umbrella, 1:50 Scale ..................$60 International TD-20E Dozer, 1:64 Scale ......................................$24 International TD-25 Dozer w/Ripper, 1:25 Scale ....................$180 John Deere “BO” Lindeman Crawler Tractor, 1:16 Scale ......$70 John Deere 200C LC Excavator, 1:50 Scale..............................$45

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

International 560 Payloader, 1:25 Scale - $125

John Deere 310J Backhoe/Loader, 1:50 Scale ........................$40 John Deere 315SJ Backhoe/Loader, 1:50 Scale ......................$40 John Deere 624J Military Wheel Loader, 1:50 Scale................$40 John Deere 772CH Motor Grader, 1:50 Scale............................$45 John Deere 850K Dozer, 1:50 Scale............................................$65 John Deere 870GP LC Grader, 1:50 Scale ................................$50 John Deere 959K Track Feller Buncher, 1:50 Scale ................$90 Komatsu CK25 Compact Track Loader, 1:50 Scale ................$45 Komatsu D51 EX Dozer, 1:50 Scale ............................................$85 Komatsu D65 EX-17 Dozer w/Ripper 1:50 Scale ......................$80 Komatsu D65PX-17 Dozer, 1:50 Scale........................................$80 Komatsu D155AX Dozer w/ripper, 1:50 Scale ..........................$95 Komatsu D375A Dozer, 1:50 Scale............................................$125 Komatsu D475A Dozer w/ripper, 1:50 Scale............................$160 Komatsu GD655 Motor Grader, 1:50 Scale................................$90 Komatsu HD605 Off-Highway Truck, 1:50 Scale ......................$80 Komatsu HM250 Articulated Dump Truck, 1:50 Scale ............$75 Komatsu HM400-3 Articulated Truck, 1:50 Scale ..................$100 Komatsu PC200 Excavator, 1:50 Scale........................$160 Komatsu WA470-7 Wheel Loader, 1:50 Scale ..........................$75 Komatsu WA500 Wheel Loader, 1:50 Scale ..............................$80 Komatsu WB146 Backhoe/Loader, 1:50 Scale ........................$75 Komatsu WH613 Telehandler, 1:50 Scale ..................................$65 Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ......$90 Leeboy 785 Motor Grader, 1:64 Scale ........................................$90 Liebherr LTM 1025 Mobile Crane, 1:50 Scale..........................$125 Poclain 160 Excavator, 1:50 Scale ............................................$150 Poclain TC45 Excavator, 1:50 Scale ........................................$140 Terex 33-07 Off-Highway Truck, NZG, 1:40 Scale ....................$90 Vogele MT3000 Powerfeeder, 1:50 Scale ................................$140 Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ....................$115 Volvo L220G Wheel Loader, 1:50 Scale ..................................$120 Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale......$120

Shipping and Handling Included

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 45

WHERE PRODUCTIVITY MEETS PROFITABILITY Easy maintenance. Low operating costs. Long service intervals. Maximize your productivity and profits with Atlas Copco breakers. Call today. Get more done tomorrow. 800-732-6762 | www.atlascopco.us

SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 20, 2014 • Page 47

Page 48 • December 20, 2014 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

Terex Generation 2 Loaders Boast More Than 100 Upgrades Terex’s new line of skid steer loaders and compact track loaders is specifically designed for rental stores and contractors working in site preparation, construction, landscaping, infrastructure development and demolition applications. The new Terex Generation 2 (GEN2) loaders feature more than 100 enhancements from the previous models and are available in radial and vertical lift-path patterns with rated operating capacities (ROC) ranging from 665 to 3,600 lb. (301 to 1,633 kg). These features combine to offer operators powerful machine productivity on every job site and equipment owners a high return on investment, according to the manufacturer. As part of the company’s continuous improvement methodology, many of the enhancements to the Terex GEN2 loader lines are aimed at increasing machine performance through additional ROC and loader breakout forces, while increasing the machine’s durability and reliability in the field, which reduces the cost of ownership during the life of the loader. “The 100 customer-driven improvements to the GEN2 loaders demonstrate Terex’s focus on continuous improvement to our skid steer loader and compact track loader lines, as well as highlight our ongoing commitment to quality and innovation,” said Vice President and General Manager of Terex Construction Americas and Global Aftermarket, Dean Barley. “Performance and durability set Terex loaders apart from the other brands in the industry. The power, engine horsepower, bucket breakout force and axle torque of Terex GEN2 loaders contribute to these machines’ unparalleled lift capability and pushing force. These attributes combined mean that Terex GEN2 loaders are able to handle heavier loads with faster cycle times than competitive brands, enabling operators to get more work done in a day.” All Terex GEN2 models are equipped with Tier IV Final engines for increased productivity at a lower operating cost. “With rental customers, as well as owner/operators, relying on Terex compact loaders,” said Barley, “the Terex Tier IV Final solution came down to simple

The new Terex Generation 2 (GEN2) loaders feature more than 100 enhancements from the previous models and are available in radial and vertical lift-path patterns with rated operating capacities (ROC) ranging from 665 to 3,600 lb. (301 to 1,633 kg).

operation, low cost of ownership, no additives and increased productivity. Operators will appreciate the enhanced performance of the new GEN2 model thanks to the extra horsepower and lift capacity provided by the Tier IV Final engines.” Other improvements incorporated into the GEN2 line were made based on customer feedback, distributor feedback and warranty data over the last six years. Some examples of these improvements include an improved quick-attach pin profile, a cylinder seal package that includes three additional sealing surfaces to eliminate potential leakage, as well as wear bands were added to reduce side load strain. GEN2 models also include new high-torque, stainless-steel clamps, upgraded hydraulic couplers, one million cycle hoses on all high-pressure applications, new standard and heavy-duty “W” style

crimps on loader and drive hoses and improved O-ring installation processes. Carrying over from the company’s popular predecessor loader models, all Terex GEN2 compact track loaders utilize the company’s Posi-Track suspended undercarriage technology and proprietary all-rubber track system. With this system, Terex GEN2 compact track loaders achieve more traction, higher flotation and better operating comfort so operators can make full use of the machine’s higher travel speeds. All Terex GEN2 skid steer loaders continue to boast 10-in. (25.4 cm) of ground clearance, 28 degree rear angle of departure and the fastest top speeds in their class — up to 12 mph, which improves these machines’ ability to traverse soft, uneven terrain to make the workday more productive and less frustrating for operators, according to the manu-

facturer. Terex GEN2 loaders have adopted a new nomenclature system to make it easier for contractors to select the right size machine for the job — this new naming scheme is based on the loader’s ROC. “Most contractors evaluate skid steer loaders and compact track loaders based on ROC,” said Barley. “The new Terex GEN2 skid steer loaders and compact track loaders are engineered to more accurately reflect this commonly used specification, which makes it easier for equipment distributors, rental dealers and contractors to best identify the machine needed to get the job done.” According to Barley, the Terex GEN2 nomenclature includes five symbols: First, an “R” or a “V” designates whether the loader is a radial or vertical lift-path unit. A series of three numbers following the letter indicates the unit’s ROC,

and finally, an “S” or a “T” indicates whether the unit is a skid steer loader or a track loader. For example, the R190T is a radial lift, 1,900-lb. (862 kg) ROC track loader, while the V200S is a vertical lift, 2,000-lb. (907 kg) ROC skid steer loader. The Terex GEN2 line currently includes eight models, ranging in size from 665 to 2,300 lb. (302 to 1,043 kg) of ROC: R070T, R160T, R165S, R185S, R190T, R200S, V200S, V230S. Additional Terex GEN2 compact track loaders and skid steer loaders, including radial and vertical lift models with 2,300 to 3,600 lb. (1,043 to 1,633 kg) ROC, will be added to the product line in the months to come. For more information, visit www.terex.com/construction. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 20, 2014 • Page 49

LOGAN CONTRACTORS SUPPLY, INC. www.logancontractors.com Des Moines 4101 106th Street • Des Moines, Iowa 50322 515-253-9048 • Fax: 515-253-9491 Quad Cities 4114 State Street • Bettendorf, Iowa 52772 563-441-2949 • Fax: 563-441-2953 Kansas City 1325 S. Enterprise Drive • Olathe, Kansas 66061 913-768-1551 • Fax: 913-768-1171 Omaha 6544 L Street • Omaha, Nebraska 68117 402-339-3900 • Fax: 402-597-0694

We’ve got you covered

BURRIS EQUIPMENT 2216 N. Greenbay Rd. • Waukegan, IL 60087 847-336-1205 • Fax: 847-336-2697 www.burrisequipment.com Ingleside, IL 815-363-4100 Joliet, IL 815-464-6650

BIRKEY’S CONSTRUCTION EQUIPMENT www.birkeys.com 2202 S. High Cross Road • Urbana, IL 61803 800-798-1772 • Fax: 217-337-1775 1055 Interstate Drive • Bloomington, IL 61705 800-374-0483 664 US Hwy 150E • Galesburg, IL 61402 866-344-2475 208 DeWitt Ave East • Mattoon, IL 61938 217-235-3158

e t i s job gh tou

FRANKLIN EQUIPMENT, LLC www.franklinequipmentllc.com Columbus Superstore 4141 Hamilton Square Boulevard Groveport, OH 43125 614-228-2014 • 800-282-1438 Dublin 7570 Fishel Drive South • Dublin, OH 43016 614-389-2161 Newcomerstown 6206 US Highway 36 SW Newcomerstown, OH 43832 740-492-0455

INDY EQUIPMENT www.indyequipment.com 6500 Schaaf Rd. • Independence, OH 44131 216-446-3200 • Fax: 216-573-7712 11159 Royalton Rd. • North Royalton, OH 44133 440-237-9040 35350 Chester Rd. • Avon, OH 44011 440-832-7133

Scan for Free Demo

Page 50 • December 20, 2014 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

Alta Equipment Company 28775 Beck Rd. Wixom, MI 48393 248-449-6700 Fax: 248-449-6701 www.altaequipment.com 2470 W. Columbia Ave. Battle Creek, MI 49015 269-965-1269 Fax: 269-965-1881

FULLY LOADED GET

5640E & 6640E SKID LOADERS

8840 Byron Commerce SW Byron Center, MI 49315 616-878-7450 Fax: 616-878-7650 4716 Talon Ct. S.E. Kentwood, MI 49512 616-698-2960 Fax: 616-698-2901

HIGH OPERATING CAPACITIES –

6327 Jomar Ct. Lansing, MI 48917 517-272-5033 Fax: 517-272-7257

POWER UP –

5920 Grand Haven Rd. Muskegon, MI 49441 231-798-9754 Fax: 231-798-9387 28855 Smith Rd. Romulus, MI 48174 734-641-8238 Fax: 734-641-8334

EXCEPTIONAL HYDRAULICS –

1524 Champagne Dr. Saginaw, MI 48604 989-752-9400 Fax: 989-752-9834

GET COMFORTABLE –

7500 E. 15 Mile Rd. Sterling Hts., MI 48312 586-977-6000 Fax: 586-977-6099 9433 Riley St. Zeeland, MI 49464 616-748-4108 Fax: 616-748-4120 476 US 31 South Traverse City, MI 49685 231-943-3700 Fax: 231-943-8110 56195 Pontiac Trail New Hudson, MI 48165 248-356-5200 Fax: 248-356-2029

Elder Ag and Turf East Palestine, OH 330-426-2166

Company Wrench

Custom Truck & Equipment

7701 Highway 24Download co-op 4805 Scoobyads Ln. NWfrom 3668 Route 23Ad South Portal. 7019 Brookville Rd. theUSGehl Kansas City, MO 64125 Carroll, OH 43112 Piketon, OH 45661 Indianapolis, IN 46239 Log into the Dealer Portal and select the Sales & Marketing Tab. 800-861-1065 866-262-4181 740-289-3294 317-375-7790 www.cte-equipment.com 740-654-5304 Fax: 317-375-7792

Click the Ad PortalFax: link in the Cooperative Advertising section. 740-687-9130 Cincinnati Branch Cleveland Branch 525 Golden Oak Pkwy. Oakwood Village, OH 44146 440-439-4567 Fax: 440-439-1789

3120 S. Verity Pkwy. Middletown, OH 45044 513-649-8105 Fax: 513-649-8107

1554 Old Frankfort Pike Lexington, KY 40504 866-262-4181 Fax: 859-254-1107

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 20, 2014 • Page 51

Illinois ILLINOIS TRUCK & EQUIPMENT Morris (815) 941-1900 THE G.W. VAN KEPPEL CO. Serviced by St. Louis, MO. (314) 872-8440

Indiana HOWELL TRACTOR & EQUIP. CO. Gary (800) 852-8816 RPM MACHINERY Fort Wayne (800) 552-0875 Indianapolis (877) 856-3001 Lafayette (800) 382-0978 South Bend (800) 521-9578 DEALER (Northern Indiana) IMPRINT AREA

Iowa MID COUNTRY MACHINERY, INC. Fort Dodge (515) 574-2302 Sergeant Bluff (712) 943-4470 Waterloo (319) 234-8710

Kentucky CONSTRUCTION MACHINERY CO., LLC Carrollton (502) 732-4661 Louisville (502) 267-4020 Owensboro (270) 683-2000 WILSON EQUIPMENT CO. Corbin (606) 528-0700 Lexington (859) 254-6443 Prestonsburg (606) 874-8036

Michigan GRAND EQUIPMENT CO., LLC Hudsonville (616) 896-7700 RECO EQUIPMENT, INC Brighton (Detroit) (810) 225-9016

AN E.P.I.C. GENERATION EFFICIENT

Minnesota GENERAL EQUIPMENT & SUPPLIES, INC. Shakopee (952) 224-1500

POWERFUL

Missouri CUSTOM TRUCK & EQUIPMENT Kansas City (816) 241-4888 St. Joseph (816) 233-9131 THE G.W. VAN KEPPEL CO. St. Louis (314) 872-8440

North Dakota RIVERBEND MACHINERY, INC. Hazen (701) 748-2450

Ohio RECO EQUIPMENT, INC Columbus Monroe (Cincinnati) Morristown Perrysburg (Toledo) Richfield (Cleveland)

(614) 276-0001 (513) 539-5255 (740) 782-1314 (419) 874-6001 (330) 659-0800

South Dakota GENERAL EQUIPMENT & SUPPLIES, INC. Sioux Falls (605) 336-9000

Wisconsin KELBE BROS. EQUIPMENT CO. INC Butler (262) 781-4970 Madison (608) 221-8300

> > >

INTELLIGENT

COMFORTABLE

Page 52 • December 20, 2014 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

Authorized Bobc at Dealer s

KENTUCKY K ENTUCKY

Lano Equipment of Norwood

OHIO OHIO

Bobcat of St. Louis

Bobcat of Bowling Green

Nor wood Young America

Bobcat Enterprises

Fair view Heights

Bowling Green

618-397-1847

270-842-4253

w w w.lanoequipofnor wood.com

w w w.bobcatofstl.com

w w w.bgbobcat.com

IL ILLINOIS LINOIS

IN INDIANA DIANA Tri-County Equipment Evansville

Bobcat Enterprises Lexington 859-254-3936 • 800-4BOBCAT

812-422-8200

Louisville

w w w.tri-count yequip.com

502-245-1911 • 800-4BOBCAT w w w.bobcat-ent.com

Tri-County Equipment Posey ville

MINNESOTA M INNESOTA

812-874-2231

Bobcat of Bemidji

w w w.tri-count yequip.com

IOWA IOWA Bobcat of Cedar Rapids

Bemidji

952-467-2181

Tri-State Bobcat

Columbus

Burnsville

614-876-1116 • 8 00-4BOBCAT

952-894-0894

Mt. Orab

Little Canada

937-444-3865 • 800-4BOBCAT

651-407-3727 • 877-331-0298 w w w.tristatebobcat.com

MISSOURI M ISSOURI Bobcat of St. Louis Columbia 573-886-9435

Bobcat of Dayton Day ton 937-293-3176 • 800-BOBCATS

Troy 937-335-5287 w w w.bobcatofday ton.com

O’Fallon

w w w.bobcatofbemidji.com

636-240-9020

WISCONSIN W ISCONSIN

Valley Park

Bobcat Plus, Inc.

636-225-2900

319-752-9999

Fergus Falls

w w w.bobcatofstl.com

Cedar Rapids

w w w.bobcatofot ter tail.com

319-393-2820

w w w.bobcat-ent.com

218-751-4660

Bobcat of Otter Tail County

Burlington

Cincinnati 513-874-8945 • 800-4BOBCAT

218-739-4505

NORTH NORTH DAKOTA DAKOTA

Appleton 920-380-1170

Butler 262-781-1199

Davenpor t

Bobcat of Rochester

Bobcat of Devils Lake

563-381-1200

Stewar tville

Devils Lake

Iowa Cit y

507-285-0753

701-662-5331

319-248-1130

w w w.bobcatofrochester.com

w w w.goironhide.com

w w w.rexcobobcat.com

Crawford’s Equipment, Inc. Cambridge

Bobcat of Grand Forks

763-689-1794

701-772-5006

w w w.craw fordsequip.com

w w w.goironhide.com

Komro Sales & Service Incorporated

Farm-Rite Equipment, Inc.

Bobcat of Williston

715-672-4263

Bryan Heavy Equipment, Inc. Oelwein 319-283-2345 w w w.br yanheav yequipment.com

KANSAS KANSAS White Star Machinery

Williston

320-275-2737 • 888-679-4857

701-572-5050

Willmar 320-235-3672 • 877-484-3211 w w w.farmriteequip.com

785-537-9979

Lano Equipment, Inc.

Topeka Wichita 316-838-3321 w w w.whitestarmachiner y.com

Grand Forks

Dassel

Garden Cit y

785-232-7731

715-720-0300

DePere 920-983-2100

620-277-2290

Manhattan

Chippewa Falls

w w w.goironhide.com

w w w.bobcatplus.com

Durand

Ritchie Implement, Inc. Cobb 608-623-2331

NEBRASKA N EBRASKA

w w w.ritchiesinc.com

Merz Farm Equipment

Tri-State Bobcat

Anoka

Falls Cit y

Hudson

402-245-2419

715-531-0801 • 866-268-2418

763-323-1720

w w w.mer z farmequipment.com

w w w.tristatebobcat.com

Loretto 763-479-8200

Shakopee 952-445-6310 w w w.lanoequip.com

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 20, 2014 • Page 53

ONE VS MANY

COMPACT TRACK LOADERS FACE OFF

SEE WHO WINS GOING HEAD-TO-HEAD. Do you want to see how compact track loaders perform in head-to-head competitions or watch side-by-side comparisons relating to performance, serviceability and durability? Before you buy your next loader, watch our video comparisons of compact track loaders. Not only do the videos show you which loader is best, they explain the small details that increase your performance and reduce your downtime. You can watch all the videos at BobcatAdvantage.com/CTLFaceOff11 and find out who comes out on top.

BobcatAdvantage.com/CTLFaceOff11 Bobcat ® and the Bobcat logo are registered trademarks of Bobcat Company in the United States and various other countries. ©2014 Bobcat Company. All Rights Reserved. | 1114249

Page 54 • December 20, 2014 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

Doosan DX63-3, DX85R-3 Boast Blade Float Feature, Improved Joysticks, More While Doosan is a relatively young Doosan introduced its two newest construction equipment brand in North compact excavators — the DX63-3 America, the organization has a global and DX85R-3 — in 2013. manufacturing history going back more than 75 years. Doosan compact excavators complement its line of larger crawler and wheel excavators, and they provide customers with machines that are designed to access and work in confined spaces where larger excavating machines can’t fit. Their impressive power, sophisticated hydraulic systems, compact size, minimal ground disturbance and attachment versatility make them a popular choice for construction, landscaping and underground utility projects. Doosan introduced its two newest compact excavators — the DX63-3 and DX85R-3 — in 2013. The Tier IV-compliant models were upgraded from earlier model excavators to provide operators with higher-precision controls, greater breakout force and overall enhanced productivity. Improvements from previous compact excavators include a blade float feature, improved multi-function joysticks, color instrumentation panel, autoshift drive system. The DX63-3 is a 58.6-net hp conventional tail swing compact excavator and weighs 6.9 tons (6.3 t). The larger DX85R-3 also has a 58.6-hp electronically controlled diesel engine, is a minimal tail swing excavator and weighs 9.5 tons (8.6 t). The DX85R-3 has 5.8 in. (14.7 cm) of tail overhang and is designed to work in congested environments and tight spaces next to buildings or other obstructions. Bucket force increased from the DX85R3’s predecessor, improving productivity the right-hand joystick activates continuous auxiliary flow. in trenching and digging applications. Independent boom swing control on the joysticks allows A blade float feature provides Doosan excavator operators operators to more easily position the work group for offset the ability to smoothly grade, level or backfill material when digging. traveling backward. Operators control the excavator’s dozer Similar to instrumentation available for larger Doosan blade with an easy-to-access lever. The excavator’s standard excavators, a multi-language, color, 5.7-in. LCD monitor rubber track undercarriage minimizes disruption to existing provides a quick visual of machine vitals. The main screen surfaces, and helps the excavator to float across dirt when displays fuel level, coolant temperature, day/time, throttle backfilling material. position and engine rpm. Operators can select auxiliary Auto-shift travel shifts Doosan compact excavators out of hydraulic flow modes and rates from the panel. high range or low range and back automatically, offering To maximize uptime protection, boom cylinder guards operators superb travel performance without having to man- protect the boom cylinder when the DX63-3 or DX85R-3 ually downshift. Operators can focus on the direction and excavators are digging. Extended grease intervals on the speed with this standard feature for the DX63-3 and DX85R- machines’ work groups minimize maintenance require3. ments. An auto-idle feature helps operators minimize fuel Doosan DX63-3 and DX85R-3 excavators have fingertip consumption by lowering the engine rpm if the machine is boom swing and auxiliary hydraulic functions. This provides idle for a predetermined time; it also makes having converoperators with improved multi-function capabilities and sations with employees much easier, due to less noise. more floor space for improved operator comfort. Adjusting For more information, visit doosanequipment.com. variable auxiliary hydraulic flow is easily accomplished via (This story also can be found on Construction Equipment a roller switch on the right-hand joystick. A lower button on Guide’s Web site at www.constructionequipmentguide.com.)

Sievers JCB 406 Old Rt 66 Hamel, IL 62046 618-633-2622 8080 State Rt 16 Hillsboro, IL 62049 217-532-3222 State Route 267 South Greenfield, IL 62044 217-368-2486 14464 Shad Rd Carlinville, IL 62626 217-854-3191

AIS Construction Equipment Corp. 3600 North Grand River Ave. Lansing, MI 48906 517-321-8000 Fax : 517-321-6275 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311

1351 W Jackson St Auburn, IL 62615 217-438-6111 www.sieversjcb.com

4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583

Rueter’s

8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257

1132 31st Ave Council Bluffs, IA 51401 712-366-5221 2425 NE 126th Ave Elkhart, IA 50073 515-367-3054 5815 Lincoln Way Ames, IA 50014 515-268-0939

56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 Fax: 248-437-9750 www.aisequip.com

Fairchild JCB

Hwy 30 West Grand Junction, IA 50107 515-738-2571

15735 Central Avenue NE Ham Lake, MN 55304 763-434-3832

23296 Hwy 30 East Carroll, IA 51401 712-792-9294

3100 Highway 13 West Burnsville, MN 55337 952-697-1720

E Highway 275 Neligh, NE 68756 402-917-5604 www.ruetersjcb.com

2140 Hutson Road Green Bay, WI 54303 920-494-8726

Sellers JCB

2815 Mary Street Marinette, WI 54143 715-735-0402

1645 S. West St. Wichita, KS 67213 316-943-9311 Fax: 316-943-8116

5217 Heffron Court Stevens Point, WI 54481 715-341-6846 www.fairchildjcb.com

15325 S. Keeler St. Olathe, KS 66062 913-764-2011

General Equipment & Supplies, Inc.

3030 S. W. 57th St. Topeka, KS 66609 785-862-0031

4300 Main Avenue Fargo, ND 58103 701-282-2662 Fax: 701-364-2190

400 N. Chicago St. Salina, KS 67401 785-823-6378

905 20th Ave. SE Minot, ND 58701 701-582-0479

395 N. Industrial Dr. Garden City, KS 67846 620-275-9621 www.sellersequipment.com

3550 Apple Creek Road Bismarck, ND 58504 701-223-9700 4082 2nd Ave. West Williston, ND 58801 701-572-0570 www.genequip.com

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 20, 2014 • Page 55

DESIGNED WITHOUT COMPROMISE. What does JCB’s Tier 4 Solution Mean to You?

• No after treatment • 10% better fuel economy • No DPF to service • No regeneration • Can use regular grade oil • No bulky add-ons • Better torque at lower revs • Lower service costs NEW

Tier 4 | ECOMAX ENGINE 3617

CONTACT YOUR JCB DEALER FOR MORE INFORMATION.

JCB of St. Louis 7978 Veterans Pkwy. St. Peters, MO 63376 636-281-4450

CSTK JCB 400 Shawnee Avenue Kansas City, KS 66105 913-371-0868 www.cstkjcb.com

MH JCB

Black JCB

Diesel Machinery Inc.

JCB of Chicago

11715 W Silver Spring Road Milwaukee, WI 53225 262-783-7510

106 Circle Freeway Dr, Cincinnati, OH 45246 513-681-2200

1187 Burch Dr., Evansville, IN 47725 888-840-9737

4301 N Cliff Ave, Sioux Falls, SD 57104 888-753-8907

1603 E Algonquin Rd Arlington Heights, IL 60005 847-437-8686

7001 Manufacturers Drive Madison, WI 53704 608-243-9253 www.buyjcb.com

3306 Gilmore Industrial Blvd, Louisville, KY 40213 502-962-6560

5119 Charter Oak Dr., Paducah, KY 42001 270-443-8889

39288 133rd St, Aberdeen, SD 57401 888-484-6312

16754 New Ave Lemont, IL 60439 630-257-1261

5859 Raymond St, Indianapolis, IN 46241 317-240-6300 www.mhjcb.com

2685 Pembroke Road, Hopkinsville, KY 42240 270-886-3432 www.blackequipment.com

3801 N Deadwood Ave Rapid City, SD 57702 800-658-3047 www.dieselmachinery.com

1548 Huntwood Dr Cherry Valley, IL 61016 815-332-8222 www.jcbchicago.com

YES JCB

Page 56 • December 20, 2014 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

Introducing Kubota’s KX040-4 with EcoPlus Technology Tough on the job but easy on fuel, Kubota’s new KX040-4 compact excavator lets you switch between energy-saving and full-power mode with ease. Kubota’s original EcoPlus system gives you up to 9% fuel economy over standard mode for more cost efficient operation. Need power plus economy? See the KX040-4 at your local Kubota dealership today. Horsepower

42.4

Operating Weight (lbs.)

9,017

Maximum Digging Depth

11' 2.6"

Bucket Breakout Force (lbs.)

9,535

Burris Equipment Co. 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 Fax 847/336-2697 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 Fax 815/363-4109

2001 Cherry Hill Rd. Joliet, IL 60433 815/464-6650 Fax 815/464-6951

1st Choice Equipment LLC 124 N. Schmale Rd. Carol Stream, IL 60188 630/510-6050 Fax 630/510-6051 1305 Sentry Drive Waukesha, WI 53186 262/521-5802 Fax 262/521-5801

Birkey’s Construction Equipment 2202 S. High Cross Road Urbana, IL 61802 800/798-1772 Fax: 217/337-1775

2900 E. Jackson St. Macomb, IL 61455 888/360-9225 200 North St. Prophetstown, IL 61277 877/221-0881

Lano Equipment, Inc. Anoka, MN 888/448-5266 753/323-1720 Shakopee, MN 877/753-6100 952/445-6310

www.kubota.com Optional equipment may be shown. ©Kubota Tractor Corporation, 2013

Corcoran, MN 888/479-4342 763/479-8200

ABC Equipment 29 Pearl Rd. Brunswick, OH 44212 888/572-3888 Fax: 330/220-4949 3825 Chester Rd. Avon, OH 44011 440/934-7368 www.abcequipment.com

Southeastern Equipment Co., Inc. 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260/483-8868 4951 West 96th Street Indianapolis, IN 46268 317/872-4877 www.southeasternequip.com

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 20, 2014 • Page 57

John Deere compact excavators work their little tails off — so you don’t have to. Zero and reducedtail-swing designs allow them to rotate fully without banging into anything. Independent-swing boom and 360-degree rotation provide the extra maneuverability you need to work more productively within tight lot lines and setbacks. Standard mechanical quick-coupler and auxiliary hydraulics allow you to hook up to rakes, breakers, and augers for maximum versatility. Opt for a bucket with a thumb to handle large materials. Whether you’re digging retaining walls or trenches for drainage or septic systems, a Deere compact excavator will fit right in.

:+< :25. <285 7$,/ 2))" Contact us today.

www.murphytractor.com www.westsidetractorsales.com Saginaw Des Moines, IA Topeka, KS North Platte, NE West Detroit Naperville, IL 60563 Bloomington, IN 47403 800/822-2212 800/279-6087 800/894-7060 4600 AIS Drive 56555 Pontiac Trail 630/355-7150 812/333-9677 P.O. Box 253 Hudson, MI 48165 Fax: 630/355-7173 Fax: 812/333-9731 Fort Dodge, IA Ulysses, KS Omaha, NE New 248/437-8121 Bridgeport, MI 48722 800/362-2487 800/472-9238 800/416-5095 Rockdale, IL 60436 Fort Wayne, IN 46808 989/777-0090 1-800/457-8121 Sioux City, IA Kansas City, MO Brunswick, OH 815/730-9011 260/482-8576 Fax: 989/777-1583 Fax: 260/483-4057 888/306-3434 800/716-9796 800/352-4693 Traverse City 1-800/937-3355 Grand Rapids 8300 M-72 East Fax: 815/730-9036 Waterloo, Springfield, OH Williamsburg, MI Rockford, IL 61102 Indianapolis, IN 46219 800/772-2019 IA MO Cambridge, 600 44th Street S.W. 888/306-2656 740/439-2747 317/544-3411 Grand Rapids, MI 49690 Dodge City, KS Gering, NE Canton, OH Fax: 317/544-3420 Fax:815/961-3160 49548 231/267-5060 800/794-0172 800/205-6784 866/235-0438 815/965-1810 ,

616/538-2400 Fax: 616/538-0449 Northeast Detroit 65809 Gratiot Ave Lenox, MI 48050 586/727-7502 Fax: 586/727-7311

Fax: 231/267-5257

South Holland, IL 60473 708/331-6362 Fax: 708/331-7334

Wauconda, IL 60084 847/526-7700 Fax: 847/526-3565

Lafayette, IN 47905 765/447-6933 Fax: 765/448-9038

South Bend, IN 46619 574/232-1461 Fax: 574/233-3324

Great Bend, KS 800/264-4056

Grand Island, NE

800/868-4017 Park City, KS Lincoln, NE 800/262-0139 800/416-5518

Chillicothe, OH 740/663-5300 Cincinnati, OH 800/844-3734

www.nortrax.com

Columbus, EOH 800/222-2010

Ashland, WI 715/682-5522

Grand Rapids, MN 218/326-9427

Lima, OH 800/423-7445

Chippewa Falls, WI 715/834-2924

Escanaba, MI 906/789-9054

Painesville, OH 866/800-1398

Monico, WI 715/487-5583

Louisville, KY 502/253-3721

Poland (Youngstown), OH 866/503-7259

Mosinee, WI 715/693-3820

Richmond, KY 859/623-2030

Duluth, MN 218/722-7456

Bowling Green, KY 270/842-3400

Bemidji, MN 218/759-1996

London, KY 606/862-8447

Vandalia (Dayton), OH 800/233-4228 Cranberry Twp, PA 724/776-3636 Greensburg, PA 724/837-4500

www.brookstractor.com Sun Prairie 1900 W. Main St. P.O. Box 9 Sun Prairie, WI 53590 608-837-5141 Milwaukee 12101 W. Silver Spring Dr. Milwaukee, WI 53225 414-462-9790 De Pere 1031 Lawrence Dr. De Pere, WI 54115 920-336-5711 West Salem 451 W. Avenue N. West Salem, WI 54669 608-786-2644 Plover 5429 Prairie Dr. Plover, WI 54467 715-254-2777

Page 58 • December 20, 2014 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

Takeuchi Adds Two New Compact Wheel Loaders to Lineup Takeuchi-US has added two compact wheel loaders to its lineup with the introduction of the TW65 SERIES 2 and TW80 SERIES 2. Equipped with EPA Final Tier IV engines, the new wheel loaders deliver increased performance, improved serviceability, and an enhanced deluxe operator’s cabin for superior operator comfort. The compact design allows these loaders to easily maneuver in tight spaces with minimal damage to lawns, pavement, and other sensitive surface areas, according to the manufacturer. The two loaders provide reach and dump heights up to 8 ft. 6 in. (2.6 m) for troublefree material handling. The TW65 SERIES 2 features an operating weight of 11,354 lbs. (5,150 kg), rated operating capacity of 4,050 lbs. (1,837 kg), tipping load of 9,171 lbs. (4,160 kg), and a bucket breakout force of 11,600 lbs. With an operating weight of 12,700 lbs. (5,760 kg), the TW80 SERIES 2 has a rated operating capacity of 4,445 lbs. (6,061 kg), tipping load of 12,700 lbs. and a bucket breakout force of 13,960 lbs. Delivering power and precise control, both loaders are equipped with a turbocharged, water-cooled Deutz engine. Operating with a maximum torque of 192

Takeuchi-US has added two compact wheel loaders to its lineup with the introduction of the TW65 SERIES 2 and TW80 SERIES 2.

ft.-lb. at 1,800 rpm, the engine delivers 73 hp with a rated engine speed of 2,200 rpm. The standard travel speed has a high range of 12.4 mph but both machines are available with a high-speed road gear option that delivers a maximum speed of 24.8 mph. The high-speed road gear system also includes a ride control accumulator to help maintain

machine control at higher travel speeds. Other features include a new multi-function, pilot operated joystick control that not only controls all loader and travel functions, it now includes a thumb wheel to control auxiliary hydraulics. For additional attachment versatility, an optional high-flow auxiliary system is available that delivers up to 26

gal. (98 Lpm) per minute to power the attachment. Featuring an improved cab in both performance and comfort, the TW65 SERIES 2 and TW80 SERIES 2 are equipped with air conditioning and heat, adjustable armrest and controller position, as well as convenient storage compartments for the operator. For improved performance, the automotivestyled interior design also features a frameless door for enhanced visibility, easy to operate function switches, inching pedal for precise machine control and precision pilot controls. “The new Takeuchi models represent some of the most advanced loaders available in the marketplace, and operators will notice a big difference, not only in performance, but also in the comfort of the cab,” said David Steger, national product and training manager of Takeuchi-US. “We are very excited about the release of these loaders and know that these machines will get the job done, while delivering outstanding performance, serviceability and value.” For more information, call 706/693-3600 or visit www.takeuchi-us.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Wacker Neuson’s 803 Can Operate With Zero Emissions Wacker Neuson has introduced a 1-ton (.9 t) excavator that can run off diesel or electric power. The 803 dual power mini-excavator runs off a standard diesel engine or can easily be connected to an electro-hydraulic pump — allowing the machine to operate emission-free. This solution is perfect for interior excavating and demolition, and is unique in that the operator can choose between diesel and electric power on the same machine depending on the application, according to the manufacturer. The 803 dual power mini-excavator is small in size, but big in performance and versatility. The new 803 dual power features a dedicated connection in the undercarriage where the electro-hydraulic pump, HPU8, attaches to the excavator. For convenience, long 39 ft. (12 m) hoses connect the HPU8 and the 803 undercarriage, allowing the mini-excavator to still rotate 360-degrees. Accessibility on the job is easy since it is narrow enough to fit through standard interior doors. The HPU8 electro-hydraulic pump was specifically developed by Wacker Neuson, ensuring that no matter which power source is used, the 803 delivers the same powerful, consistent performance. In the conventional operation, the 803 is powered

The 803 dual power mini-excavator runs off a standard diesel engine or can easily be connected to an electro-hydraulic pump — allowing the machine to operate emission-free.

by a 13-hp diesel engine, which provides the small excavator enough power for breaking applications. When connected to the HPU8 electo-hydraulic pump, the 803 runs emissions-free with the same best in class performance.

Wacker Neuson’s new 803 dual power mini-excavator features a telescopic undercarriage that can extend from 27.5 to 34-in. (70 to 86 cm) for greater stability and lifting power. The dimensions of the HPU8 were optimized for the 803, and it can be lifted

and transported on the excavator’s dozer blade for easy transport, or can be moved via the jobsite-ready wheels or lift hook. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 20, 2014 • Page 59

RESPECTFULLY DISREGARDS CONVENTIONAL EXCAVATOR WISDOM. Plenty of people make compact excavators. But none can say they engineered the first mini-excavator, zero tail swing excavator, swing-boom excavator and rubber-tracked excavator. At Yanmar, we simply can’t stop innovating. That’s why our nine excavators – seven with true zero tail swing – are each purpose-built to overcome the most challenging conditions, work with unparalleled power and conserve fuel. So, if you just want to play around on your jobsite, go get any old excavator. BUT IF YOU’D RATHER RULE YOUR JOBSITE, GET A YANMAR. RuleTheJobsite.com

BUCK & KNOBBY EQUIPMENT CO. 6220 Sterns Rd Ottawa Lake, MI 49267 734-856-2811

VERMEER MIDWEST

VERMEER OF IOWA

PAINT VALLEY EQUIPMENT

2801 Beverly Dr. Aurora, IL 60502 630-820-3030

3310 West Coliseum Blvd. Fort Wayne, IN 46808 260-484-2494

PO Box 168-661 Hwy T14 Pella, IA 50219 641-628-2000

PO Box 224 Eureka, IL 61530 309-467-3716

PO Box 273 17550 Chesterfield Airport Rd. Chesterfield, MO 63006 636-532-2332

Vermeer Siouxland 4858 D Ave. Marcus, IA 51035 712-376-2310

10550 Twp Rd. 262 Millersburg, OH 44654 877-774-0081 Fax: 330-674-4031

1005 Thorez Rd. Jackson, MI 49201 517-750-3783

Vermeer of Eastern Iowa 101 Commerce Blvd. Tipton, IA 50219 563-886-2444

CUSTOM TRUCK & EQUIPMENT

1801 179th Ave. Moline, IL 61244 309-751-9540

7701 Highway 24 Kansas City, MO 64125 800-861-1065 www.cte-equipment.com

13402 Britton Park Rd. Fishers, IN 46038 317-842-1040 3566 Citadel Circle Newburgh, IN 47630 812-490-4400

1196 A Franklin St. Marne, MI 49435 616-677-5900

ROEDER IMPLEMENT INC. 2550 Rockdale Rd. Dubuque, IA 52003 563-557-1184 Fax: 563-583-1821

Page 60 • December 20, 2014 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

EXPERIENCE EX PERIENCE T THE HE D DIFFERENCE IFFERENCE Takeuchi offers Takeuchi offers the the m most ost iinnovative nnovative a and nd a advanced dvanced li line ne o off c compact ompac t e equipment q u i p m e nt o on n tthe he p planet. lanet. C Come ome a and nd ssee ee w what hat e everyone veryone e else lse iiss ttalking alking a about. bout. E Experience xperience T Ta Takeuchi akeuchi — Visit V isit your your local local dealer dealer ttoday. oday.

McCann Industries 543 S. Rohlwing Rd • Addison, IL 60101 630-627-0000 250 E. North Frontage Rd. • Bolingbrook, IL 60440 630-739-7770 2350 S. Laflin St. • Chicago, IL 60608 312-942-9200 4701 West 137th Street • Crestwood, IL 60445 708-597-3110 1133 Indianapolis Blvd. • Schererville, IN 46375 219-865-6545 1360 N. Rand Rd. • Wauconda, IL 60084 847-526-9444 4102 W. Crystal Lake Rd. • McHenry, IL 60050 815-385-0420 www.McCannOnline.com

Brandeis Machinery & Supply Company 17000 Highway 41 N Evansville, IN 47725 812-425-4491 7310 Venture Lane Fort Wayne, IN 46818 260-489-4551 8410 Zionsville Road Indianapolis, IN 46268-1524 317-872-8410 1801 Watterson Trail Louisville, KY 40299 502-491-4000 www.brandeismachinery.com

Victor L. Phillips Co. 4100 Gardner Ave. • Kansas City, MO 64120 800-878-9290 5430 S. Highway 43 • Joplin, MO 64804 800-878-8223 6330 W. Hwy 60 • Brookline Station, MO 65619 800-955-2729 3250 North Hydraulic • Wichita, KS 67219 800-878-3346 1304 SW 42 St. • Topeka, KS 66609 800-878-4345 2203 West Jones Ave. • Garden City, KS 67846 800-511-1435 www.vlpco.com

Road Builders Machinery and Supply Co., Inc. 4115 S. 90th St. • Omaha, NE 68127 402-331-9200 Fax: 402-339-6620 5601 Fletcher Ave. • Lincoln, NE 68507 402-325-0447 Fax: 402-325-0753 4949 Juergen Rd. • Grand Island, NE 68801 308-384-2620 Fax: 308-384-0686 www.roadbuildersmachinery.com

Alta Equipment Company Road Machinery & Supplies Co.

Star Equipment Ltd.

5633 W. Highway 13 • Savage, MN 55378 952-895-9595 • 800-888-9515 314 Garfield Ave. • Duluth, MN 55802 218-727-8611 • 800-888-9535 315 North Hoover Rd. • Virginia, MN 55792 218-741-9011 • 800-752-4304 75 US Hwy 41 • Neguanee, MI 49866 906-475-6488 606 W. 10th Ave. • Milan, IL 61264 309-787-1742 • 800-633-9114

1401 2nd Avenue • Des Moines, IA 50314 515-283-2215 • 800-369-2215 Fax 515-283-0295 2625 W. Airline Hwy. • Waterloo, IA 50703 319-236-6830 • 800-791-9249 Fax 319-236-6834 2950 6th Street SW • Cedar Rapids, IA 52404 319-365-5139 • 800-728-5139 Fax 319-365-6726 2100 E. Lincoln Way • Ames, IA 50010 515-233-9500 • 866-856-2312 Fax: 515-233-9505 www.starequip.com

RMS Rentals 12520 Quenton Ave. So., Ste 100 Savage, MN 55378 952-895-9595 • 800-888-9515 www.rmsequipment.com

Kelbe Brothers Equipment Co., Inc. 12770 W. Silver Spring Drive • Butler, WI 53007 262-373-2151 Fax: 262-373-2102 4621 Dutch Mill Rd. • Madison, WI 53716 608-221-8300 Fax: 608-221-0610 3101 French Rd. • De Pere, WI 54115 920-343-6496 Fax: 262-781-9671 www.kelbebros.com

28775 Beck Rd. • Wixom, MI 48393 248-449-6700 2470 W. Columbia Ave. • Battle Creek, MI 49015 269-965-1269 8840 Byron Commerce SW • Byron Center, MI 49315 616-878-7450 4716 Talon Ct. S.E. • Kentwood, MI 49512 616-698-2960 6327 Jomar Ct. • Lansing, MI 48917 517-272-5033 5920 Grand Haven Rd. • Muskegon, MI 49441 231-798-8754 56195 Pontiac Trail • New Hudson, MI 48165 248-356-5200 28855 Smith Rd. • Romulus, MI 48174 734-641-8238 1524 Champagne Dr. • Saginaw, MI 48604 989-752-9400 7500 E. 15 Mile Rd. • Sterling Hts., MI 48312 586-977-6000 476 US 31 South • Traverse, MI 49685 231-943-3700 9433 Riley St. • Zeeland, MI 49464 616-748-4108 www.altaequipment.com

Columbus Equipment Company 50 East Kingston Ave. • Columbus, OH 43207 614-443-6541 12500 Williams Rd. • Perrysburg, OH 43551 419-872-7101 712 Shepherd Ave. • Cincinnati, OH 45215 513-771-3922 3942 Brecksville Rd. • Richfield, OH 44286 330-659-6681 290 Old Steubenville Pike • Cadiz, OH 43907 740-942-8871 7570 New Carlisle Pike • Dayton, OH 45424 937-879-3154 1601 Shepler-Church Ave. SW • Canton, OH 44706 330-453-4521 818 Lee St. • Zanesville, OH 43701 740-455-4036 864 Richmond Rd. • Painesville, OH 44077 440-352-0452 3668 US Route 23 South • Piketon, OH 45661 740-289-3757 www.columbusequipment.com

Midwest Underground Supply 1106 32nd St. SW Bondurant, IA 50035 877-967-5656 27285 Ironworks Rd. Harrisburg, SD 57032 605-368-9880 www.midwestundergroundsupply.com

FIND F IND O OUT UT W WHAT H AT O OTHERS TH ERS K KNOW. N OW. V VISIT I S IT T TAKEUCHI-US.COM AKEUCHI - US .COM TO TO FIND F I N D THE T H E DEALER D E A L E R NEAREST N E A R E S T YOU. YO U .

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 20, 2014 • Page 61

Bobcat of St. Louis

Luby Equipment Services

Wilson Equipment Company

2300 Cassens Drive • Fenton, MO 63026 636-343-9970

2180 Old Frankfort Pike • Lexington, KY 40510 859-254-6443 800-432-0913 Fax: 859-254-9099

401 West Outer Rd. Valley Park, MO 63088 636-225-2900 Fax: 636-225-4344

199 Airport Road • Cape Girardeau, MO 63702 573-334-9937

1885 West Terra Lane • O’Fallon, MO 636-240-9020

8853 Petroff Drive • Caseyville, IL 62232 618-397-9971

1101 N. Lenway Dr. • Columbia, MO 573-886-9435

4375 Camp Butler Road Springfield, IL 62707 217-744-2233

828 W. Cumberland Gap Pkwy • Corbin, KY 40701 606-528-0700 800-274-9457 Fax: 606-528-2329

9801 West State Route 161 Fairview Heights, IL 618-397-1847

2625 North 24th St. • Quincy, IL 62305 217-222-5454

2124 Watergap Road • Prestonsburg, KY 41653 606-874-8036 • 800-955-9457 Fax: 606-874-0013

www.bobcatofstl.com

www.lubyequipment.com

www.wilsonequipment.com

FIND F IND O OUT UT W WHAT H AT O OTHERS TH ERS K KNOW. N OW. V VISIT I S IT T TAKEUCHI-US.COM AKEUCHI - US .COM TO TO FIND F I N D THE T H E DEALER D E A L E R NEAREST N E A R E S T YOU. YO U .

Page 62 • December 20, 2014 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

Hyundai Presents Tier IV Final R35Z-9 Compact Excavator The Hyundai R35Z-9 compact excavator has an operating weight of 8,050 lbs. (3,650 kg) and is powered by a reliable, fuel efficient 26.5 hp (19.8 kW) Tier IV Certified Yanmar 3TNV88 engine. The R35Z-9 boasts a dig depth of 10 ft. 4 in. (3.1 m) a bucket digging force of 7,050 lbf (31.4 kN) and bucket capacity of 3.78 cu. ft. (.107 cu m). The R35Z-9 offers a tail-swing radius of 2 ft. 10 in. (.8 m), allowing for efficient operation on sites where space is limited. Hyundai designed the R35Z-9’s hydraulic system to give the user super-fine touch and top-level controllability, allowing the excavator to be agile and accurate while operating in congested areas. Optimized matching between the joystick and main control valve improves control and smoothness of operation. An arm flow summation system provides energy savings, reduced cavitation and increased speed, according to the manufacturer. To improve safety and avoid boom drift the R35Z-9 is equipped with an integrated boom holding system. The R35Z-9 features a fully customizable operator’s station allowing the end-user to set their operating preferences to meet their individual needs. Some of these customizable options include an easily adjustable

seat and wrist rest settings, foldable pedals that provide increased floor space and ergonomically located left and right control levers for convenient access. The monitoring system of the R35Z-9 provides the operator with machine status information including engine oil pressure, battery charge, engine coolant temperature and a fuel gauge. Reliability is improved and maintenance costs are reduced on the R35Z-9 compact excavator. The addition of lubricated bushings has extended lube intervals throughout the attachment to 250 hours and polymer shims resist wear and reduce noise. Extended-life hydraulic filters (1,000 hours) and long-life hydraulic oil (5,000 hours) also are provided to maximize service life and reduce downtime. Regular service and maintenance is easy on the R35Z-9 with doors, covers and hoods built for complete open access. A centralized lubrication bank and easy change air cleaner also are available for faster and easier servicing. For more information, call 877/509-2254 or visit www.hceamericas.com. The R35Z-9 boasts a dig depth of 10 ft. 4 in. (3.1 m) a bucket digging force of 7,050 lbf (31.4 kN) and bucket capacity of 3.78 cu. ft. (.107 cu m).

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

JCB Compact Excavator Takes Conventional Approach JCB launched its first conventional tail swing compact excavator in the 3.0 ton (2.7 t) North American market, with the launch of the 8029 CTS. Powered by a transverse 25 hp (18.4 kW) engine, the excavator has a tail swing just 18.5 in. (47 cm) longer than the 8025 ZTS zero tail swing machine. Despite these compact dimensions it boasts a 19 percent higher lift capacity and an 82 percent improvement in lift capacity over the tracks. Digging depth for the 8029 CTS is 10 ft. (3 m) and the machine offers a load over height of 10 ft. 6 in. (3.2 m). Excellent bucket rotation and class-leading breakout force results in high productivity when digging, according to the manufacturer. In addition the machine can be supplied with a wide range of JCB attachments, each specifically designed to work with the excavator’s powerful hydraulic system. The compact excavator boasts a sturdy fabricated box boom design with a slim construction that pro-

vides increased visibility to the digging area, improving productivity. All of dig end hoses are routed through the inside of the boom, offering protection when digging in narrow trenches. Single side grease points have been introduced on the excavator arm pins, simplifying daily greasing for quicker and easier dig end maintenance. A new undercarriage with three bottom rollers, plus one on top, coupled with heavy-duty idler guides, provides smooth travel across site and excellent tractive ability in tough site conditions. Tracking speed and tractive effort are both increased over the zero tail swing 8025 ZTS model. Operator Cab The JCB compact excavator cab is one of the largest on the market, with a wide door opening for safe entry and exit. There is ample leg room due to a seat which can be adjusted a further 2.1 in. (5.3 cm) rearwards compared to the 8025 ZTS. The cab floor is flat and easy to clean and flat glass has been maintained throughout for low cost

Digging depth for the 8029 CTS is 10 ft. (3 m) and the machine offers a load over height of 10 ft. 6 in. (3.2 m).

replacement. The offset pedal is combined with the auxiliary on the right hand side of the cab floor. This maximizes the space avail-

able in the cab, providing unrestricted entry, and allows for easy cab floor cleaning. A new hydraulic valve with

longer spools delivers smoother controllability, increased load holding capability and full power multi-function use while straight line tracking. All hydraulic services are disabled including the dig end joysticks, tracking levers, boom swing and auxiliary pedals when the left hand pod is raised for optimum safety, removing the risk of inadvertent operation of the machine. To ensure the rear of the 8029 CTS is among the strongest and most protected in the industry, JCB has opted for a solid cast counterweight, which will withstand the harshest of impacts and operating environments. New rubber cab mounts reduce vibration and cut internal noise levels to just 77dB(A). The entire cab structure is isolated from the swing motor frame to minimize vibration. For more information, visit www.jcb.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide â&#x20AC;˘ Mini & Compact Equipment Section â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ December 20, 2014 â&#x20AC;˘ Page 63

Stop in and see our complete line of John Deere E-Series Skid Steers, and 204K, 304K, and 244J Compact Loaders. Each comes standard with quiet heated cabs that keep winter on the outside while delivering vir tually unobstructed visibilit y from the inside. And all can be equipped with our Worksite Proâ&#x201E;˘ buckets, angle brooms, and snow pushers, blades, and blowers. Best of all, we provide a wealth of resources to NHHS \RX UXQQLQJ DW SHDN HI Ć&#x;FLHQF\ IRU \HDUV WR FRPH Ĺ LQFOXGLQJ GHSHQGDEOH SDU WV VXSSRU W IDFWRU \ WUDLQHG WHFKQLFLDQV DQG FXVWRPL]HG Ć&#x;QDQFLDO VHU YLFHV $VN IRU D GHPR WRGD\

www.erbequipment.com Fenton, MO 63026 636/349-0200 Cape Girardeau, MO 63703 573/334-0563 Foristell, MO 63348 636/673-2131 Cuba, MO 65453 573/885-0500 Mt. Vernon, IL 62864 618/244-6800 Paducah, KY 270/554-1131 Owensboro, KY 270/684-2339 Evansville, IN 812/473-0484

www.lec1.com Ashland, KY 606/928-3477 Pikeville, KY 606/432-0321 Marrietta, OH 740/373-5255 Cowen, WV 304/226-3299 Beaver, WV 304/255-1525 Elkins, WV 304/636-6421 Cross Lane, WV 304/204-1818

www.westside tractorsales.com 1400 W. Ogden Ave Naperville, IL 60563 630/355-7150 Fax: 630/355-7173 South Holland, IL 708/331-6362 Rockdale, IL 815/730-9011 Wauconda, IL 847/526-7700 Rockford, IL 815/961-3160 South Bend, IN 574/232-1461 Lafayette, IN 765/447-6933

www.murphytractor.com Sioux City, IA 800/352-4693 Waterloo, IA 800/772-2019 Dodge City, KS 800/794-0172 Great Bend, KS 800/264-4056 Topeka, KS 800/279-6087 Ulysses, KS 800/472-9238 Park City, KS 800/262-0139 Kansas City, MO 888/306-3434 Springfield, MO 888/306-2656

Gering, NE 800/205-6784 Grand Island, NE 800/868-4017 Lincoln, NE 800/416-5518 North Platte, NE 800/894-7060 Omaha, NE 800/416-5095 Brunswick, OH 800/716-9796 Canton, OH 866/235-0438 Chillicothe, OH 740/633-5300 Cincinnati, OH 800/844-3734

Columbus, OH 800/222-2010 Lima, OH 800/423-7445 Poland, OH 866/503-7259 Vandalia, OH 800/233-4228 Cambridge, OH 740/439-2747 Painesville, OH 440/639-0700 Cranberry Twp, PA 724/776-3636 Delmont, PA 724/837-4500

Page 64 • December 20, 2014 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

Case Introduces Tier IV Final TR310 Alpha Series CTL Case Construction Equipment’s Tier IV Final TR310 Alpha Series compact track loader (CTL) features wider tracks (15.75 in. [40 cm]), a greater overall width (74.3 in. [188.7 cm]) and lower ground pressure (5.0 psi) than other medium-frame CTLs in the Case lineup. These features provide greater power, stability and flotation for owners/operators who need that performance without upgrading to a large-frame machine, according to the manufacturer. The new TR310 weighs in at 8,800 lbs. (3,991 kg) with a rated operating capacity of 3,100 lbs. (1,406 kg) and a bucket breakout force of 8,680 lbs. The machine’s 74 hp, 232 ft.-lbs. of torque and increased hydraulic flow (standard: 24.2 gpm [91.6 Lpm]; highflow: 32.4 gpm [122.6 Lpm]) make it ideal for landscaping, residential construction and agricultural applications. The radial-lift arm design is ideal for digging and pushing applications, and the machine’s hinge-pin height (10 ft., 3 in. [3.1 m]) is excellent for loading and unloading trucks. It also features a 19.5-gal. (73.9 L) fuel tank, which extends runtimes and ensures that the machine can work the entire day without refueling. Maintenance-Free Tier IV The new TR310 weighs in at 8,800 lbs. (3,991 kg) with a rated operating capacity of 3,100 lbs. (1,406 kg) and a bucket breakout force of 8,680 lbs. Final Solution The TR310 features a cooled exhaust gas recirculation (CEGR) engine operators to switch between the Case “H” loader arm movement while traveling for a according to the manufacturer. with a particulate matter catalyst, which is operating pattern and ISO pattern controls, smoother ride with greater material retenEasy to Use and Maintain made up of a diesel oxidation catalyst and new handles with Case-exclusive tion. detents that allow the operator to physically The engine, filters and fill points are all (DOC) and a high-efficiency flow-through Comfort for the Operator located at the rear of the machine for quick filter. The DOC converts emissions into neu- feel when the joystick is coming out of neuThe TR310 offers one of the widest cabs and easy access. The TR310 features Case’s tral gasses. The remaining particulate matter tral. in the industry at nearly 3 ft. (.9 m) wide. It easy-tilt cab for convenient access to the drithen passes through to the filter where it is slowed and burned. This solution is efficient Dozer-Style Undercarriage Offers features an enclosed cab that is fully sealed vetrain compartment. Hydraulic quick couStability and Performance and pressurized against noise and dust. It plers allow operators to quickly change and maintenance free as it does not require All Case Alpha Series compact track load- also features the industry’s lowest entry attachments from the cab, while connect filter replacement. ers feature a dozer-style undercarriage, threshold, which makes it easy for the oper- under pressure (CUP) manifolds require no EZ-EH Controls Provide Flexibility designed for stability on steep slopes and ator to get in and out of the cab. The cab-for- tools to connect or disconnect hydraulic The TR310 offers an EZ-EH (electro- excellent performance in muddy and sandy ward design provides best-in-class visibility lines. For more information, visit hydraulic) setup menu that features nine terrain. The rigid track frame features fewer with excellent site lines down to the bucket optimal preset speed and control settings. moving parts than suspension track systems, edge, curb lines and to the rear of the www.CaseCE.com. (This story also can be found on This allows the operator to match controls to making it more durable and easier to main- machine. Ultra-narrow wire side screens, a their preference for greater confidence and tain. The TR310 also features push-button large and curved rear window, side lighting Construction Equipment Guide’s Web site at productivity. A single rocker switch allows ride control as an option, which dampens and a skylight further improve visibility, www.constructionequipmentguide.com.)

Construction Equipment Guide â&#x20AC;˘ Mini & Compact Equipment Section â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ December 20, 2014 â&#x20AC;˘ Page 65

KELBE BROTHERS EQUIPMENT CO. 12770 W. Silver Spring Drive Butler, WI 53007 262-781-4970 â&#x20AC;˘ Fax: 262-781-9671 www.kelbebros.com 4621 Dutch Mill Rd. Madison, WI 53716 608-221-8300 3101 French Rd. De Pere, WI 54115 920-343-6496

CONSTRUCTION MACHINERY COMPANY www.cmcky.com 2911 S. English Station Rd. Louisville, KY 40299 502-267-4020 â&#x20AC;˘ 866-901-2262 â&#x20AC;˘ Fax: 502-261-9251 2235 Ragu Drive Owensboro, KY 42303 270-683-2000 â&#x20AC;˘ 877-683-2262 â&#x20AC;˘ Fax: 270-683-3727 267 W. Jay Louden Rd. Carrollton, KY 41008 502-732-4661

Link-Belt Spin Ace ([FDYDWRUV DUH SDFNHG ZLWK DOO WKH SRZHU SURGXFWLYLW\ DQG IXHO HIÂżFLHQF\ \RXÂśYH come to expect from us - along with a minimum swing radius design for better maneuverability at sites where work space is at a premium. Thoughtful redesign of counterweights and boom placement makes them ideal for residential construction, utility work and specialty trenching jobs. ÂŽ

ÂŽ

Â&#x2021; Roomy, redesigned cab Model # Operating Wt. Â&#x2021; +LJK GHÂżQLWLRQ IXOO FRORU 75 X3 Spin Ace 17,400 lbs. Ć&#x17D; /(' PRQLWRU 80 X3 Spin Ace OEV Â&#x2021; Convenient ground-level 145 X3 Spin Ace 33,200 lbs. VHUYLFH DQG Ă&#x20AC;XLG FKHFNV 235 X3 Spin Ace OEV Â&#x2021; Extended service intervals Â&#x2021; 7LHU $ FHUWLÂżHG ,VX]X HQJLQHV Â&#x2021; 3-year subscription to RemoteCAREâ&#x201E;˘ telematics

Net hp @ rpm

Tail Swing

54 hp @ 2,000 rpm 54 hp @ 2,000 rpm 100 hp @ 2,000 rpm KS # USP

Ć? Ć&#x17D; Ć? Ć&#x17D; Ć? Ć&#x17D; Ć? Ć&#x17D;

$OO WKLV ZLWK WKH LQGXVWU\ÂśV EHVW VWDQGDUG ZDUUDQW\ Your Link-Belt Excavator dealer has the right Spin Ace for your application, along with uncompromising service and support to keep them performing at their best. *75 X3 and 80 X3 engines are Final Tier 4

HAYDEN-MURPHY EQUIPMENT COMPANY www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 â&#x20AC;˘ 800-352-2757 â&#x20AC;˘ Fax: 952-884-2293

Page 66 • December 20, 2014 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

Cat 303E CR Offers Optimum Performance in Tight Spaces With a maximum operating weight of 7,782 lbs. (3,530 kg), the 303E CR expands the Cat mini-excavator line and gives buyers more choice in the 2.75 to 3.85 ton (2.5 to 3.5 t) size class.

The new Cat 303E CR mini-hydraulic excavator, only 61 in. (155 cm) wide across the blade and having a compact-radius design that limits tail swing to less than 5 in. (12 cm), is an easily transported machine that works efficiently and safely in small spaces and on congested job sites. With a maximum operating weight of 7,782 lbs. (3,530 kg), the 303E CR expands the Cat mini-excavator line and gives buyers more choice in the 2.75 to 3.85 ton (2.5 to 3.5 t) size class. The new model’s 23.5-hp (17.5 kW) Cat C1.3 engine combines with a powerful load-sensing hydraulic system — delivering flows to 23.1 gpm (87.6 Lpm) — to provide productive, reliable performance in demanding applications, according to the manufacturer. Available both in cab and canopy configurations, the 303E CR is designed for the operator’s convenience and safety. All operator stations, cab or canopy, are ROPS, TOPS and Top Guard Level 1 certified, and the Cat interlock system, which prevents

hydraulic movement when the safety bar is raised, adds further to operational safety, as do the standard travel alarm, automatic swing brake, and 3 in.-wide retractable seatbelt. A large, adjustable suspension seat keeps operators comfortable, and a monitor that displays gauges and general diagnostics keeps them informed. An automatic twospeed travel system enhances overall machine efficiency and ease of operation, and an automatic engine-idle system conserves fuel and reduces sound levels. The 303E CR’s hydraulic system uses low-effort, pilot-operated joysticks that provide more precise, more consistent control than mechanical-linkage controls. For operator convenience, auxiliary-hydraulic controls are integrated into the joysticks, making the 303E CR work-tool ready with both a one-way-flow circuit for tools such as hydraulic hammers and a two-way-flow circuit when using work tools with cylinders or bi-directional motors. An in-cab pattern changer allows easily switching con-

trols to suit operator preference. To increase operator productivity and efficiency, the 303E CR’s bucket can rotate 200 degrees, providing increased material retention at the top of the lift cycle when loading trucks and allowing for deeper flatback trenches without repositioning the machine. In addition, a lifting eye on the front linkage provides a secure attachment point for rigging. For added convenience, a float function for the dozer blade allows the blade to follow ground contour and create smooth finish grades, perhaps eliminating an additional grading tractor on the project. Also adding to the 303E CR’s versatility is its ability to use the bucket in a frontshovel configuration, an advantage for such tasks as installing utility pipe, cleaning material from inside truck bodies, or filling a hopper next to a wall. When digging in confined spaces, the 303E CR’s offset boom provides added flexibility. To increase the 303E CR’s overall versatility, a mechanical quick coupler is avail-

able for accommodating work tools such as augers and hydraulic hammers, and a thumb-ready stick is standard. An accumulator in the auxiliary hydraulic system smoothes hydraulic action, prevents damaging pressure spikes, and releases pressure through the pilot system. Auxiliary lines are mounted low on the stick, close to work tools, eliminating the need to use long, flexible hoses, vulnerable to damage, to reach work tools. Quick-disconnect couplers provide easy, spill-proof connections with work tools, and for added utility, the 303E CR accepts all Cat 303.5 and 304 E Series mini-excavator work tools. Steel tracks are available for the 303E CR, as an alternative to the standard rubber tracks, for use in applications that require higher resistance to sharp debris. For more information, visit www.cat.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide â&#x20AC;¢ Mini & Compact Equipment Section â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ December 20, 2014 â&#x20AC;¢ Page 67

www.arnoldsinc.com Arnoldâ&#x20AC;&#x2122;s of Kimball 701 State Hwy 55 E â&#x20AC;¢ Kimball, MN 55353 320/398-3800 Arnoldâ&#x20AC;&#x2122;s of Glencoe 655 Lindbergh Trail â&#x20AC;¢ Glencoe, MN 55336 320/864-5531 Arnoldâ&#x20AC;&#x2122;s of St. Martin 374 Industrial Drive â&#x20AC;¢ St. Martin, MN 56376 320/548-3285

Block 1535 & 1627

Arnoldâ&#x20AC;&#x2122;s of Mankato 1715 Howard Drive â&#x20AC;¢ No. Mankato, MN 56003 507/387-5515 Arnoldâ&#x20AC;&#x2122;s of St. Cloud 2995 Quail Rd. NE â&#x20AC;¢ Sauk Rapids, MN 56379 320/251-2585

BURRIS EQUIPMENT CO. www.burrisequipment.com 2216 N. Green Bay Rd. â&#x20AC;¢ Waukegan, IL 60087 847/336-1205 Fax: 847/336-2697 27939 W. Concrete Dr. â&#x20AC;¢ Ingleside, IL 60041 815/363-4100 2001 Cherry Hill Rd. â&#x20AC;¢ Joliet, IL 60433 815/464-6650 Fax: 815/464-6951

oaders!

ing on

Gear up

financ d n e r a e y with

0 Down, 0 LANO EQUIPMENT INC. www.lanoequip.com

6140 Highway 10 Anoka, MN 55303 888/448-5266

3021 133rd St. SW Shakopee, MN 877/753-6100

23580 Highway 55 Loretto, MN 888/479-4342

www.kubota.com

ack l r t t c a p m o es c SVL75 Seri

% . Financing, for

* s h t n o M up to 6 0

COLUMBUS EQUIPMENT COMPANY www.columbusequipment.com 50 Kingston Ave. â&#x20AC;¢ Columbus, OH 43207 614/443-6541 12500 Williams Road â&#x20AC;¢ Perrysburg, OH 43551 419/872-7101 7570 New Carlisle Pike â&#x20AC;¢ Dayton, OH 45424 937/879-3154

A.P.R

1st CHOICE EQUIPMENT LLC 124 N. Schmale Rd. â&#x20AC;¢ Carol Stream, IL 60188 630/510-6050 Fax: 630/510-6051 1305 Sentry Drive â&#x20AC;¢ Waukesha, WI 53186 262/521-5802 Fax: 262/521-5801 HAUG-KUBOTA, LLC. www.haugkubota.com East Highway 12 3585E. Hwy 12 Willmar, MN 56201 320/235-2717 Fax: 320/235-2771

BIRKEYâ&#x20AC;&#x2122;S CONSTRUCTION EQUIPMENT 2202 S. High Cross Rd. Urbana, IL 61802 800/798-1772 Fax: 217/337-1775

NIEBUR TRACTOR & EQUIPMENT, INC. www.nieburtractor.com 14380 240th St. E. Hastings, MN 888/839-6860

GRZQ $ 3 5 Â¿ QDQFLQJ IRU XS WR PRQWKV RQ SXUFKDVHV RI QHZ .XERWD =* H[FOXGLQJ =* = = VHULHV =3 =' H[FOXGLQJ =' /3 DQG =' %; % / 0 H[FOXGLQJ 0 6 0 6 7/% '0 5$ 7( . .; 8 DQG 69/ 6HULHV HTXLSPHQW DYDLODEOH WR TXDOLÂ¿ HG SXUFKDVHUV IURP SDUWLFLSDWLQJ GHDOHUVÂ¶ LQ VWRFN LQYHQWRU\ WKURXJK ([DPSOH $ PRQWK PRQWKO\ LQVWDOOPHQW UHSD\PHQW WHUP DW $ 3 5 UHTXLUHV SD\PHQWV RI SHU Â¿ QDQFHG $ 3 5 LQWHUHVW LV DYDLODEOH WR FXVWRPHUV LI QR GHDOHU GRFXPHQWDWLRQ SUHSDUDWLRQ IHH LV FKDUJHG 'HDOHU FKDUJH IRU GRFXPHQW SUHSDUDWLRQ IHH VKDOO EH LQ DFFRUGDQFH ZLWK VWDWH ODZV ,QFOXVLRQ RI LQHOLJLEOH HTXLSPHQW PD\ UHVXOW LQ D KLJKHU EOHQGHG $ 3 5 1RW DYDLODEOH IRU 5HQWDO 1DWLRQDO $FFRXQWV RU *RYHUQPHQWDO FXVWRPHUV $ 3 5 DQG ORZ UDWH Â¿ QDQFLQJ PD\ QRW EH DYDLODEOH ZLWK FXVWRPHU LQVWDQW UHEDWH RIIHUV )LQDQFLQJ LV DYDLODEOH WKURXJK .XERWD &UHGLW &RUSRUDWLRQ 8 6 $ 'HO $PR %OYG 7RUUDQFH &$ VXEMHFW WR FUHGLW DSSURYDO 6RPH H[FHSWLRQV DSSO\ 2IIHU H[SLUHV 6HH XV IRU GHWDLOV RQ WKHVH DQG RWKHU ORZ UDWH RSWLRQV RU JR WR ZZZ NXERWD FRP IRU PRUH LQIRUPDWLRQ 2SWLRQDO HTXLSPHQW PD\ EH VKRZQ

ABC EQUIPMENT RENTAL & SALES INC. www.abcequipment.com 29 Pearl Rd. â&#x20AC;¢ Brunswick, OH 44212 888/572-3888 Fax: 330/220-4949 38525 Chester Rd. â&#x20AC;¢ Avon, OH 44011 440/934-7368

Page 68 • December 20, 2014 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

Ditch Witch’s SK850 Accepts Dozens of Attachments The Ditch Witch organization’s SK850 is equipped with a 37-hp (27.6-kW), Tier IV Yanmar diesel engine. The engine provides outstanding power for all machine functions and directs more power to the attachment than other models, so attachments are more productive. The SK850 accepts dozens of attachments for a wide range of utility, landscaping, plumbing and other underground construction tasks. The Ditch Witch organization firmly believes that a more comfortable operator is a more productive operator, and the SK850 embodies this philosophy. Its 74-sq.-in. (188-sq cm) platform is larger and higher, giving the operator increased comfort and stability while keeping him above the work site. The ergonomic operator’s station has been updated with new, customer-requested features, for optimized comfort and efficiency. Dual-lever ground drive controls come standard, with an optional single-lever joystick available. An auxiliary control foot pedal helps operators maintain hydraulic flow to the attachment while freeing their hands to control depth and ground speed. The SK850’s high-drive track system has bolt-on sprockets that can be interchanged — an exclusive Ditch Witch feature — to provide longer-lasting performance. The

track system also has a low-maintenance track-tensioning system with a grease cylinder for easy adjustment and track removal, which helps in-crease track life and reduce downtime. The SK850 comes with the customer’s choice of 42-in. (107 cm) or 36-in. (91 cm) wide tracks. With its 860-lb. (390 kg) rated operating capacity and 83-inch. (2.1 cm) hinge-pin height, the SK850 is engineered for productive loading. The SK850 is constructiongrade, built with reinforced steel that can withstand the rigors of the job site. And its belt-free design helps minimize maintenance and increase up-time. Another standard feature that improves both operational efficiency and operator safety is the auto-throttle function. When enabled, the auto-throttle automatically reduces engine RPMs when hydraulic functions are not in use. The engine returns to the operator-set engine RPM when any hydraulic function is engaged, improving overall fuel efficiency, according to the manufacturer. For more information, call 800/654-6481 or visit www.ditchwitch.com. The Ditch Witch SK850 is equipped with a 37-hp (27.6-kW), Tier IV Yanmar diesel engine.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

ALLU’s DL Screening Buckets Extend Range to Compacts ALLU Group Inc.’s DL screening buckets are designed specifically for use with compact base machines such as mini-excavators, small wheel loaders, skid steers and backhoes. One bucket allows you to change screen sizes ranging from 5/8, 1 ¼

ALLU Group Inc.’s DL screening buckets are designed specifically for use with compact base machines such as mini-excavators, small wheel loaders, skid steers and backhoes.

and 2 in. (1.6, 3.2 and 5 cm) just by changing out the screen and hammers. The DL screening bucket is the perfect tool for landscapers and is engineered to screen, mix, aerate and load top soil, peat and compost. The core of the new DL screening bucket is the unique top screen where the screening hammers spin between the screen comb. This design makes the buckets clog-free, ensuring good production and throughput even with wet materials. Additionally, the new DL screening bucket doesn’t require a case drain line for operation making the bucket as simple as attach and start screening.

To ensure maximum performance and durability, the bucket’s frame was designed and modeled using finite element analysis (FEA) engineering. The material weight is carried by the top screen comb so the drums and bearings have less impact under the load. The screening blades and top screen comb are changeable when worn or when changing size adjustments, which helps keep operating costs low. The buckets are available in three models — the DL 2-09, DL 2-12 and DL 2-17. The DL 2-09 is the smallest of the series and is recommended for use with mini-excavators weighing 8,800 to 26,000 lbs. (3,991 to 11,793 kg) and small wheel loaders weighing 4,400 to 17,600 lbs. (1,996 to 7,983 kg). The bucket is 43 in. wide, 35 in. high and 37 in. (109 by 89 by 94 cm) deep and weighs 947 lbs. (429.5 kg). The DL 2-12 bucket is recommended for compact excavators weighing 15,400 to 26,000 lbs. (6,985 to 11,793 kg) and for small wheel loaders weighing 6,600 to 17,600 lbs. (2,993 to 7,983 kg). The bucket is 56 in. wide, 35 in. high and 37 in. (142 by 89 by 94 cm) deep and weighs 1,190 lbs. (540 kg). The DL 2-17 bucket is the largest bucket in the series and is recommended for use with compact excavators weighing 19,800 to 26,000 lbs. (8,981 to 11,793 kg) and for small wheel loaders weighing 8,800 to 17,600 lbs. (3,991 to 7,983 kg). The bucket is 74 in. wide, 35 in. high and 37 in. (188 by 89 by 94 cm) deep and weighs 1,532 lbs. (695 kg). For more information, call 800/939-2558 or visit www.allu.net. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 20, 2014 • Page 69

STAR EQUIPMENT LT D .

TOP NOTCH EQUIPMENT, INC.

STAR EQUIPMENT LTD. 1401 2Nd AvENUE dES moINES, IA 50314 (515) 283-2215 FAx: (515) 283-0295 (800) 369-2215

2625 w. AIRlINE Hwy. wATERloo, IA 50703 (319) 236-6830 FAx: (319) 236-6834 (800) 791-9249

2950 6TH STREET Sw cEdAR RAPIdS, IA 52404 (319) 365-5139 FAx: (319) 365-6726 (800) 728-5139

www.STAREQUIP.com

2100 E. lINcolN wAy AmES, IA 50010 (515) 233-9500 FAx: (515) 233-9505 (866) 856-2312

5505 HIgHwAy 169 N. PlymoUTH, mN 55442 (888) 824-6559 (763) 398-0079 FAx: (763) 551-7916 www.ToPNoTcHEQUIPmENT.com

Pages 70-72

Snow and Ice Section For more information on snow-clearing equipment and spreaders, visit CEG's Web site at www.constructionequipmentguide.com.

Snow Season Brings Warmth for SDLG Wheel Loaders All over North America, snow removal planning and purchasing is in full-swing. With snow removal equipment, budget is paramount. Wheel loaders used to remove snow aren’t used for many hours, as their usage demands are entirely dependent on the weather. As a result, the snowy season is driving both sales and rentals of SDLG wheel loaders across North America. The attraction is simple: SDLG wheel loaders require less of an initial investment than their premiumpriced counterparts, but without sacrificing quality. Chad Gerondale, who handles marketing and special projects with Alaskabased Construction Machinery Industrial (CMI), is seeing an uptick in snow removal sales and rentals, especially SDLG wheel loaders. “The key to purchasing snow removal equipment is return on investment. If it doesn’t snow too much, the machine is left idle and the company isn’t generating revenue,” he said. “The value proposi-

tion of SDLG wheel loaders is ideal, as with one SDLG loader you can retire two pickup trucks. It doesn’t make sense to purchase a more expensive machine because there’s no guarantee it will work enough to see a benefit. Those customers buying and renting SDLG wheel loaders are saying very good things about the machines, too.” One of those customers is Anchorage-based Boehmer Services. Boehmer is an independent snow removal and asphalt maintenance company that purchased an SDLG wheel loader in the fall of 2013. So far, it’s put some 180 hours of snow removal work on the machine. Saygen Boehmer, president of the company, said that value pricing of the SDLG LG938L initially piqued his interest, but now that he’s spent a full season using the loader for snow removal, it’s the features that make him a fan. “For the price, I think SDLG wheel loaders are the best in their class,” he said. “The four-wheel turning comes in really handy for

Cole Koch, superintendent and part-owner of Double K Excavating, in front of the company's snow-covered SDLG LG959.

snow removal and really, it turns better than any premium-priced machine I’ve ever used. The fiveyear warranty was also big reason I went with SDLG — I know that if I have any problems, CMI has guaranteed its best support and service.” Government Use Regional and local governments are making their snow removal purchases now, too, and many are choosing SDLG. In Canada for example, the rural municipalities of Sarnia and Caledonia, both in

Saskatchewan, have purchased SDLG wheel loaders with the intent to use them on snow removal projects. Both groups purchased the 2.4 cu. yd. (1.8 cu m) bucket SDLG LG938L. Al Quinn, director of SDLG North America, said that with public funds, money is tight and closely-watched. Groups are looking for the best bang for their buck, but not if it means sacrificing quality. “SDLG provides a great option for municipalities because often, the machines aren’t working 24/7/365, so there’s no need for the

features of a premium machine and no need to worry about recouping that high of an investment,” he said. “But that doesn’t mean the wheel loaders can be low quality — people in their regions depend on their vital services, so they must buy a machine that will work well and is backed by great product support and service. SDLG provides just that.” SDLG has four wheel loaders available across its dealer network: The LG938L, a 2.4 cu. yd. capacity wheel loader; the LG948L, a 3.0 cu. yd. (2.3 cu m) capacity wheel loader; the LG959, 4.0 cu. yd. (3 cu m) capacity wheel loader; and the LG958L, which has the same basic specs as the LG959, but with dry disc brakes rather than wet disc. All four loaders are backed by a 12month, 1,500-hour warranty. For more information, visit www.sdlgna.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Case Offers SR250, SV300 Snow Packages Case Construction Equipment has released a new snow removal package for the SR250 and SV300 skid steers that optimizes the machine for snow removal applications and simplifies the ordering process through the Case dealer network. The 90 hp SR250 (radial lift) from Case Construction Equipment offers a rated operating capacity of 2,500 lbs. (2,700 lbs. with optional counterweight) and breakout force of 7,480 lbs. The 90 hp SV300 (vertical lift) offers a rated operating capacity of 3,000 lbs. (3,200 lbs. with optional counterweight) and a breakout force of 7,570 lbs. The new snow removal package includes high-flow auxiliary hydraulics that provide up to 37.6 gpm (142 L) for use with

snow blowers and brushes. The package also comes with hydraulic self-leveling and ride control, both ideal for smooth and controlled boom operation while engaged and while traveling. The new package also includes an enclosed cab and a heated airride suspension seat for optimal operator comfort during long days of working in cold environments. It also comes with a block heater to assist in cold starts, and a 4corner LED strobe kit and heavy-duty lighting package/side lamp kit for optimal visibility — both for the operator and for drivers/pedestrians in the area. The package also comes with larger tires (14 X 17.5) for more speed and power while working on paved surfaces. A heavy-duty rear door and hydraulic couplers further add to the pack-

age’s reliability. The SR250 and SV300 also are outfitted with a new EZ EH (electro-hydraulic) setup menu that features nine preset speed and control settings that can be adjusted on the fly. This allows the operator to match controls to their preference. A single rocker switch allows operators to switch between the CASE “H” operating pattern and ISO pattern controls. New handles with additional “feel points” improve controllability and feathering. The SR250 and SV300 also offer one of the widest cabs in the industry at nearly 3 ft. (.9 m). The cab is fully sealed and pressurized against noise, dust and fumes. The cab-forward design provides best-in-class visibility, and the low step and entry thresh-

The new snow removal package includes high-flow auxiliary hydraulics that provide up to 37.6 gpm (142 L) for use with snow blowers and brushes.

old makes it easy for the operator to get in and out of the cab. As with all Case skid steers, the engine, filters and fill points are all located at the rear of the machine for easy access. For more information, visit www.CaseCE.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • December 20, 2014 • Page 71

Page 72 • December 20, 2014 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

TOPPERS PLUS 1929 East Madison Ave. Mankato, MN 56001 507-387-7376 800-321-7587 www.toppersplus.com

TRUCK UTILITIES 2370 English St., St. Paul, MN 55109 651-484-3305 800-869-1075 2770 5th Ave S., Fargo, ND 58103 701-241-9411 800-972-9250 www.truckutilities.com

NORTH CENTRAL TRUCK & EQUIPMENT 2629 Clearwater Road St. Cloud, MN 56301 732 30th Avenue SE Minneapolis, MN 55414 877-485-9595 www.northcentralinc.com

TRUCKIN’ AMERICA 4720 Hwy. 52 N. Rochester, MN 55901 800-556-4720 507-285-9855 www.truckinamerica.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 73

EXPERIENCE THE POWER OF

HYUNDAI

Looking for power? Hyundai machines come standard with Hi-Mate RMS. That’ That’ss the power of technology technology, y,, giving you the data d you need to keep your projects running smoothly smoothly.. Lear Learn n mor more e at hceamericas.com.

CALL FOR DEMO AND PRICING ILLINOIS

KENTUCKY

Diamond Equipment 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 618-242-2273 800-388-6396 Fax: 618-242-9161 www.diamondequipment.com

Diamond Equipment 1046 Lovers Lane Bowling Green, KY 42103 270-781-1061 800-489-1061 Fax: 270-781-0907

Martin Implement Sales, Inc. 18405 115th Avenue Orland Park, IL 60467 708-349-8430 Fax: 708-349-4230

Team Boone 150 Schuler Dr. Bardstown, KY 40004 502-348-7573 Fax: 502-348-4401 www.teamboone.net

420 Nolen Drive South Elgin, IL 60177 630-883-3320 Fax: 847-695-9105 26354 N US Highway 12 Wauconda, IL 60084 847-469-0120 Fax: 847-526-8054 www.martinimplement.com

INDIANA Diamond Equipment 1060 Diamond Ave. Evansville, IN 47711 812-425-4428 dmfortune @diamondequipment.com www.diamondequipment.com 2000 Harlan Drive Terry Haute, IN 47802 812-299-4747 888-343-4747 Fax: 812-299-3687

Rueter’s www.rueterco.com 1132 31st Ave. Council Bluffs, IA 51401 712-366-5221 Fax: 712-366-5228

Southeastern Equipment Co., Inc. 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260-483-8868

5815 Lincoln Way Ames, IA 50014 515-268-0939 Fax: 515-268-0943

4951 West 96th Street Indianapolis, IN 46268 317-872-4877 www.southeasternequip.com

KANSAS

IOWA

Hardings Heavy Equipment 109 W. Commercial Ave. Lowell, IN 46356 219-696-8911 www.hardingsinc.com info@hardingsinc.com

Hwy 30 West Grand Junction, IA 50107 515-738-2571 Fax: 515-738-2343

The Victor L. Phillips Co. www.vlpco.com 3250 N. Hydraulic St. Witchita, KS 67219 316-838-3347

Hwy 30 East Carroll, IA 51401 712-792-9294 Fax: 712-792-6808

1305 SW 42nd St. Topeka, KS 66609 785-267-4345

2425 NE 126th Ave. Elkhart, IA 50073 515-367-3054

2203 Jones Ave. Garden City, KS 67846 620-275-1996

NEBRASKA

Rueter’s www.rueterco.com E. Hwy 275 Neligh, NE 68756 402- 887-5638 Fax: 402-887-5638

MICHIGAN

Midland Engine 622 Jefferson Ave. Midland, MI 48640 989-631-4608 www.midlandengine.com

MISSOURI

The Victor L. Phillips Co. www.vlpco.com 4100 Gardner Ave. Kansas City, MO 64120 816-241-9290 5430 Missouri 43 Joplin, MO 64804 417-781-8222 6330 W. Highway 60 Brookline Station, MO 65802 417-887-2729

Page 74 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Big Changes...

Power Show Ohio 2015 to Feature New Layout, More Convenient Dates Big changes are on tap for the 45th edition of Power Show Ohio — big changes to remember. This year’s show begins Jan. 29, and continues through the 31st at the Ohio Expo Center in Columbus, Ohio. The change in days comes in answer to exhibitor requests and a post-show survey indicating the exhibitors desire to reserve Sundays for family and church. Holding the show Thursday, Friday and Saturday still provides a day for those that work Monday through Friday. Thursday will provide an extra day for those that attend the show as a part of their job. The Kiddie Tractor Pull will be held on Saturday. What Else Is New? The all new layout of the exhibitor area creates a fresh look at the newest innovations in power equipment at Ohio’s biggest and best indoor equipment show. The new floor plans are exciting. They encompass 212,000 sq. ft. utilizing the Bricker Building and Celeste Center. The same amount of exhibit space has been maintained by narrowing the aisles and making more efficient use of the exhibit floor. Having all exhibits in two buildings that are in close proximity to each other will reduce the amount of walking for attendees allowing them more time to talk with exhibitors.

A Complete Power Equipment Industry Show Power Show Ohio is not like any other equipment show. Power Show Ohio brings together, all in one place, three segments of the power equipment industry: agriculture, construction and outdoor power equipment. Power Show Ohio features more than 500 brands of equipment, including tractors, skid steer loaders, commercial mowing equipment, all terrain vehicles, grain handling, fencing, hay equipment, buildings, backhoes, firewood equipment, compact tractors, livestock equipment and a number of lifestyle items. Plus special daily educational seminars. Discount coupons are available from equipment dealers throughout Ohio. The discount coupons give attendees a $2 discount on the $10 carload admission and parking fee. Power Show Ohio is sponsored by the Ohio-Michigan Equipment Dealers Association and held at the Ohio Expo Center just off Interstate 71 at Exit 111 in Columbus. Show hours are 9:00 a.m. until 4:00 p.m. on Thursday, Friday and Saturday. For more information, visit PowerShowOhio.com.

CONTINENTAL EQUIPMENT CORP. A division of AIS www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000 Fax: 517/321-4191 Service Branches 8300 m-72 East Williamsburg, MI 231/267-5060 231/267-5257 56555 Pontiac Trail New Hudson, MI 248/437-8121 248/437-9750 4600 AIS Drive Bridgeport, MI 989/777-0090 989/777-1583 65809 Gratiot Ave. Lenox, MI 586/727-7502 586/727-7311

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Up Nine Percent...

ELFA Reports New Business Volume for October Totaled $8.3B in MLFI-25 The Equipment Leasing and Finance Association’s (ELFA) Monthly Leasing and Finance Index (MLFI-25), which reports economic activity from 25 companies representing a cross section of the $903 billion equipment finance sector, showed their overall new business volume for October was $8.3 billion, up 9 percent from new business volume in October 2013. Month over month, new business volume was down 12 percent from September. Year to date, cumulative new business volume increased 8 percent compared to 2013. Receivables over 30 days increased from the previous month to 1.2 percent, and were up from 0.9 percent in the same period in 2013. Charge-offs were unchanged for the seventh consecutive month at an all-time low of 0.2 percent. Credit approvals totaled 78.3 percent in October, a decrease from 79.7 percent the previous month. Total headcount for equipment finance companies was up 0.7 percent year over year.

Separately, the Equipment Leasing & Finance Foundation’s Monthly Confidence Index (MCI-EFI) for November is 64.2, an increase from the October index of 60.4 and the highest level since May. ELFA President and CEO William G. Sutton said: “ELFA members report strong growth in new business volume, albeit tempered by continued margin compression in many sectors. The U.S. economy continues to expand at a modest rate, providing a welcome stimulus for investment in business equipment. Portfolios are performing relatively well, although delinquencies are showing some slight volatility. Most economic indicators — lower fuel prices, reduced unemployment and a robust equity and bond market — all point to a strong fourth quarter, absent some unforeseen development.” Michael Doyle, president, BTMU Capital Leasing and Finance Inc., said, “The solid growth in October year-on-

year new business volume is evidence of a fairly robust capital expenditure environment. We see this trend continuing into a strong fourth quarter, with the possible exception of those markets related directly to petroleum exploration and development. These markets will continue to be negatively affected if low oil prices persist. Stronger sectors include those involving transportation assets and information technology equipment and software. Generally, we are seeing consistent credit discipline, but this has not yet translated into a more stable pricing environment. We expect that margin compression will continue to be an issue in the fourth quarter as lessors look to book volume to meet their 2014 budgets.” For more information, visit www.elfaonline.org. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 502/499-3195 Fax Evansville, IN 812/425-4491 812/425-1171 Fax Corbin, KY 606/528-3700 606/528-9014 Fax Lexington, KY 859/259-3456 859/254-0783 Fax Stanville, KY 606/478-9201 606/478-9208 Fax Paducah, KY 270/444-8390 270/575-4907 Fax Indianapolis, IN 317/872-8410 317/872-8417 Fax Ft.Wayne, IN 260/489-4551 260/489-1620 Fax

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 913/371-3870 Fax Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 75

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 906/786-5813 Fax Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 920/532-0526 Fax DeForest, WI 608/842-4151 608/842-4193 Fax Eau Claire, WI 715/874-5400 715/874-5401 Fax Franksville, WI 262/835-2710 262/835-2844 Fax Schofield, WI 715/355-9898 715/241-0044 Fax

GENERAL EQUIPMENT & SUPPLIES www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 701/364-2190 Fax 905 20th Avenue SE Minot ND, 58701 800/852-0479 3500 Apple Creek Road Bismarck, ND 58504 800/279-4437 4082 2nd Ave. W Williston, ND 58801 701/572-0570

DASH 10 EXCAVATORS From Komatsu - The Excavator Experts

Komatsu Dash 10 excavators provide increased horsepower, improved operator comfort and reduced fuel consumption. The excavator experts at Komatsu can help you complete jobs more quickly, while lowering your fuel and maintenance costs. t Efficient Komatsu Tier 4 Interim engines and advanced hydraulic system maximize productivity while providing up to 10% lower fuel consumption t Enhanced operator environment improves comfort and machine control t Komatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.

www www.komatsuamerica.com .komatsuamerica.com

Page 76 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Fuel Savings, Maintenance, Customer Support Allow for Business Growth

WEST SIDE TRACTOR SALES CO. www.westside tractorsales.com 1400 W. Ogden Ave. • Napervile, IL 60563 630-355-7150 Fax: 630-355-7173

BOOM from page 20

movements, optimizes the power being put forth by the machine — requiring it to use only as much power (fuel) as is necessary to complete the job. It also features three different working modes —speed priority, heavy and automatic — that allow the operator to further dial the machine into the site conditions. “There are three different levels of throttle,” said Boomsma. “We were used to running the machine full throttle all the time — that was the old mentality. When we first got these, we tried the three different levels. The highest throttle obviously consumes more fuel — and then we made the guys run it in the economy [automatic] mode, and pretty much we get just as much done at full throttle as we do with economy mode. “We don’t run at anything but economy mode. When I pull up to a job site, I barely hear the machine running. When it’s working, it’s at a constant dull roar. I know when I pull up, the lack of sound is money in my pocket based on fuel.” Increasing Uptime and Making Total Cost of Ownership Predictable Fuel savings is only a part of the equation for Professional Excavating. Titan Machinery and Case were able to make owning and operating costs for the first three years of ownership predictable through Case ProCare. ProCare includes a three-year Advanced Case SiteWatch subscription, a three-year/3,000-hour fullmachine factory warranty and a threeyear/3,000-hour planned maintenance contract. That combination — warranty, planned maintenance contract and telematics —fully protects Boomsma from unexpected owning and operating costs. It also helps boost his return on investment, as Case estimates that the maintenance/service-related cost savings for those first three years of ownership with ProCare comes out to approximately $9,540 per machine, $19,080 for two. ProCare also creates a new level of customer service from his equipment dealer, who monitors the machines’ telematics feeds and schedules service at times that won’t slow work down.

150 W. 162nd St. Route 6 • South Holland, IL 60473 708-331-6362 Fax: 708-331-7334 3110 Prairie Rd. • Rockford, IL 61102 815-961-3160 Fax: 815-965-1810 1560 N. Old Rand Rd. • Wauconda, IL 60084 847-526-7700 Fax: 847-526-3565 600 Walnut Court • Rockdale, IL 60436 815-730-9011 Fax: 815-730-9036

Professional Excavating works on a residential site just outside of Rapid City, S.D.

Advances in hydraulics and electronics have helped drive the CX160C’s fuel efficiency.

“I literally do nothing besides grease and fuel the machines for the first three years,” said Boomsma. “When the service manager is calling us at 250 hours [for a fuel filter change] and he’s going to do it after hours — I have no downtime, I have no maintenance cost. I have no doubts of downtime knowing that we’re running brand-new equipment and, if something goes down, they’re going to replace it with a [comparable] machine in 24 hours.” The ability for his dealer to monitor the telematics feed, combined with the planned maintenance contract, assures Boomsma that his operators can focus on operating without worrying about maintenance. “I don’t make money sitting in a machine,” added Boomsma. “Nobody is going to take care of that equipment like I would — and I don’t expect them to. This takes that variable out of it. I don’t have to worry about how many

hours the machine has on it, is the oil getting changed? Is the oil pressure running too high because there’s a fault? I can put my operators in there and expect them to do exactly that: be an operator.” “All they have to worry about is digging this hole, and we can take care of everything else,” said Lavake. “It enables that one-on-one interaction and we can really dial in our service, in any amount of convenience for the customer, in a way that they’ve never seen before.” The telematics solution also provides Boomsma with insight into the performance of his equipment/workforce without having to drive out to the job site. “I know if he’s running or not, I can pull it up on the computer and see if the machine is turned on, if it’s idling — it just gives me an idea of where they’re at in the job.” All things considered — the fuel cost savings combined with the peace of mind and improved customer service made possible by ProCare — Boomsma is most satisfied with his company’s ability to keep ahead of schedule. “A company of my size, when we are running as hard as we do all the time, I can’t have downtime. It screws up the schedule, and that’s one of the advantages of why people hire me — they know I’m going to be there when I say I’m going to be there. I can’t do that with equipment failures.”

AIS CONSTRUCTION EQUIPMENT CORPORATION www.aisequip.com 3600 North Grand River Avenue • Lansing, MI 48906 517-321-8000 Fax: 517-321-6275 Grand Rapids 600 44th Street S.W. • Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 Northeast Detroit 65809 Gratiot Avenue • Lenox, MI 48050 586-727-7502 Fax: 586-727-7311 Saginaw 4600 AIS Drive P.O. Box 253 • Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 Traverse City 8300 M-72 East • Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 West Detroit 56555 Pontiac Trail • New Hudson, MI 48165 248-437-8121 800-457-8121

RDO EQUIPMENT CO. www.rdoequipment.com 12500 DuPont Ave. S. • Burnsville, MN 952-890-8880 1910 LorRay Dr. • North Mankato. MN 506-387-1836 1236 60th Ave. N.W. • Rochester, MN 507-282-8888 6700 Highway 10 NW • Sauk Rapids, MN 320-259-6222

Philippe Bisson is the brand marketing manager of Case Construction Equipment

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

hitachiconstruction.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 77

NORTRAX www.nortrax.com 310 Industrial Park Drive • Ashland, WI 54806 715-682-5522 Fax: 715-682-8476 4341 South PrairieView Rd. (Hwy 53 North) Chippewa Falls, WI 54729 715-834-2924 Fax: 715-834-1173 1890 US Hwy 8 • Monico, WI 54501 715-487-5583 Fax: 715-487-5968

NEVER SIDETRACKED.

1425 O’Keefe Drive • Mosinee, WI 54455 715-693-3820 Fax: 715-693-3825 259 Convenience Lane Southwest • Bemidji, MN 56601 215-759-1996 Fax: 218-759-1790 3401 Arrowhead Rd. • Duluth, MN 55811 218-722-7456 Fax: 218-722-2619 34316 Hwy 2 • Grand Rapids, MN 55744 218-326-9427 Fax: 218-327-1248 1818 North Lincoln Rd. • Escanaba, MI 49829 906-789-9054 Fax: 906-789-0344

BROOKS TRACTOR www.brookstractor.com Sun Prairie 1900 W. Main St. • P.O. Box 9 • Sun Prairie, WI 53590 608-837-5141 Milwaukee 12101 W. Silver Spring Dr. • Milwaukee, WI 53225 414-462-9790 De Pere 1031 Lawrence Dr. • De Pere, WI 54115 920-336-5711 West Salem 451 W. Avenue N. • West Salem, WI 54669 608-786-2644 Plover 5429 Prairie Dr. • Plover, WI 54467 715-254-2777

RUDD EQUIPMENT COMPANY 4344 Poplar Level Rd • Louisville, KY 40213 502-456-4050 6901 Highway 41 N • Evansville, IN 47725 812-867-6661 5820 Industrial Rd • Fort Wayne, IN 46825 260-482-3681 2655 Kentucky Ave • Indianapolis, IN 46221 317-247-9125 728 W Cumberland Gap PKWY • Corbin, KY 40701 606-528-9440

A “jack-of-all-trades” is good at some things, but great at nothing. That’s why at Hitachi, we stay on course specializing in excavators. By not getting sidetracked, we make exactly what you want. Great, reliable excavators.

2114 Highway 1428 E • Prestonsburg, KY 41653 606-874-2104 4679 Baumgartner Rd • St. Louis, MO 63129 314-487-8925 11807 Enterprise Drive • Cincinnati, OH 45241 513-321-7833 2512 Jackson Pike • Columbus, OH 43223 614-636-4050 COMING SOON Cleveland, OH 216-393-7833

hitachiconstruction.com

THAT’S ALL.

Page 78 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Igel Opts for Precast Concrete for Waterline Over Iron ramps and 15 bus stops for the city of Columbus Public Transportation. With this project complete, the city of Columbus is now looking at designing phase two, expected to get under way in 2016. “It’s almost identical in scope,” Miller said. “It is a little shorter, but it’s two lanes widened to five and it’s all going to connect.” If they’re lucky phase two will go just as well as the first. “We did have our share of problems,” he said. “But a problem for us is an opportunity. This was a humongous project that sat on a shelf for 10 years. Normally, they add in a 10-percent contingency. But with this project, they gave us a 5-percent contingency — just under $900,000. We finished with $200,000 to $300,000 below budget, and we finished on schedule — actually three days ahead. I had a great staff with me, too. They were wonderful.”

ALUM from page 1

though it was multi-year, was hampered with utility relocation issues,” Miller said. The 10 years that the plans languished also created some issues. “When you design a project 10 years ago, a lot of things change that may or may not have been incorporated on the design plans,” said Miller. “Being able to weed through those things was a challenge. People had built businesses and businesses had been torn down. We would find things buried underground, like gas tanks. Property owners had changed so it was a challenge tracking down who to call. Because the plans were 10 years old they did go through a revision, but a lot of things with the specs fell through the cracks. But it was nothing major.” The project called for the standard roadwork equipment such as backhoes, pavers, graders and rollers, plus soil stabilization equipment. Crews cut the road down to the proposed grade and installed the storm sewer, lowering the roadway substantially. “When we cut it down, we went in with the stabilization machine and mixed cement with soil and water and let it cure,” Miller said. “That gave it a really hard stable surface to build the road on. We have a lot of clay here in Ohio and that cement stiffens right up when it hardens. “You’ve got a water truck, big soil stabilization machine. It looks

The city gave bidders three choices of acceptable materials for a new 30-in. (76 cm) waterline: ductile iron, steel or precast concrete. Typically, contractors opt for ductile iron, but on this project Igel proposed precast concrete.

like a large Zamboni except it has big rototiller blades mixing the soil. There was also a sheep’s foot roller and smooth drum roller. We had a lot of equipment. We installed new overhead powerlines and some underground. On any given day, we had probably 30 to 50 people out there.” The project also called for a new 30-in. (76 cm) waterline. The city gave bidders three choices of acceptable materials: ductile iron,

steel or precast concrete. Typically, contractors opt for ductile iron, Miller said. But on this project Igel proposed precast concrete. “You don’t see too much of that but depending on the availability and prices you do see it occasionally,” Miller said. Crews also constructed a 10-ft. (3 m) wide asphalt path on both sides of the road to be shared by pedestrians and cyclists, as well as more than 100 ADA compliant

With this project complete, the city of Columbus is now looking at designing phase two, expected to get under way in 2016.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

The $18 million project was designed 12 years ago, but sat unfunded until 2012 when money became available from the Federal Transportation Fund.

Crews constructed a 10-ft. (3 m) wide asphalt path on both sides of the road to be shared by pedestrians and cyclists, as well as more than 100 ADA compliant ramps and 15 bus stops for the city of Columbus Public Transportation.

Paving

SECTION

Pages 79-87

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

Hamm Expands HD+ Series Range by Nine Machines Types Hamm has expanded the range of HD+ series rollers by nine machine types with service weights of 14,000 lbs. and 16,000 lbs. (6,350 and 7,257 kg). The new HD+ 70i (15,000 lbs. [6,804 kg]), roller drum width 5 ft. (1.50 m) and HD+ 80i 16,000 lbs., roller drum width 5.5 ft. (1.68 m) are available as vibratory, oscillatory, combi and high frequency rollers. The HD+ 80i also will be offered with a split drum. Clean and Efficient Tier IV Engine Technology Equipped with modern engine technology, the HD+ 70i and HD+ 80i rollers comply with the very stringent Tier IVf exhaust gas regulations in force since 2014. The Deutz 55.4 kW 4-cylinder diesel engine is fitted with a diesel oxidation catalyser (DOC) to reduce particulate emissions. The cooling system also meets the most up-to-date demands: two separately controlled fans ensure optimum cooling of charge air, hydraulic oil and engine coolant. At the same time, the load-dependent fan control for engine cooling saves fuel and reduces noise emissions. The larger rollers HD+ 90i and HD+ 110i (85 kW) as well as HD+ 120i and HD+ 140i (115 kW) are available with new Tier IVicompliant engines now. All these rollers come with the Hammtronic machine management system as standard. This means optimized performance, minimized fuel consumption, engine operation in the optimum load range at all times and high-quality, consistent compaction through control of the traction and parameters such as speed and frequency. Maximum Comfort The HD+ 70i and HD+ 80i rollers offer a spacious XXL platform resp. cab with a laterally adjustable seat. The powerful heater (option) also can be complemented with air conditioning if desired. Drivers have an enhanced view of the roller drum and water sprinkler. As there are

The HD+ series of articulated tandem rollers offers a solution for every asphalt compaction task with seven basic models and a diversity of roller drums and options.

no intruding pillars, they also overview the surrounding area. Meanwhile the operating console and display remains in the field of view at all times, being attached to the seat. Despite the comfortable interior headroom, the overall height of the new HD+ 70i and HD+ 80i models is 2 in. (5 cm) less than their forerunners. This facilitates transport and working in areas with limited overhead clearance. Hamm also can supply the new HD+ 70i and HD+ 80i models with ROPS roof or sun shield roof. Top-Class Handling and High Compaction Power The handling and compaction qualities of the new tandem rollers are based on the ideal weight distribution, so they quickly produce perfectly even surfaces, according to the manufacturer. Moreover, a stepless frequency adjustment is provided. When reversing, the automatic transmission provides gentle acceleration and braking, playing its part in ensuring even asphalt layers without bulges

or hollows. In addition, the crab steering mode offset has been increased by 40 percent compared to the previous HD 75 model. This results in plenty of clearance for clean edge pressing. Productivity Comes as Standard With a large water and diesel tank, both new models are equipped for long working days: the capacities enable working a full shift without refilling. Maximum availability is provided by a water sprinkler system with a second water pump. The water quantity can be fine-tuned by the push of a button and an indicator shows constantly the residual volume of water in the tank. New: Telematics and Rear-View Cameras The HD+ series now features a telematics interface, which can be used to transmit data for use in fleet management systems. It also can be used for remote monitoring or for theft protection. The VEDA option for the

HCQ measurement and documentation system enables the export of data in conformity with the US analysis software “Veda” for comprehensive compaction control in asphalt construction. Optional rear view cameras ensure even more safety. A 5.6 in. display allows the driver to check for the presence of people or obstructions in the area immediately behind the roller at any time. Award-Winning Design Since its launch in 2010, the HD+ series has received multiple awards for its successful design and usability, amongst them the iF design award 2010 in gold, the red dot design award 2010, the American “Good Design Award” and the French “Observeur du design.” For more information, visit www.hamm.eu. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 80 • December 20, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

User Friendly...

AutoPilot Stringless Paving The Wirtgen AutoPilot — a stringless control system for use with Wirtgen SP 15/SP 15i and SP 25/SP 25i concrete slipform pavers — is a user-friendly, cost-effective control system for poured-in-place concrete profiles, such as curbs, safety barriers or slabs. AutoPilot is a GPS-based system that ensures precision and efficiency in slipform paving, regardless of whether straight profiles or highly complex curved paths are being poured, The Wirtgen AutoPilot is a user-friendly, cost-effecaccording to the manufacturer. tive control system for poured-in-place concrete The Wirtgen AutoPilot con- profiles, such as curbs, safety barriers or slabs. trol system bypasses the need to establish a digital terrain model because pro- GPS reference station positioned on site. For gramming is completed by using a rover precise grade control, a laser, ultrasonic senpole to capture coordinates or by simply sor or total station is used. The machine conusing the job site plans. This means a sur- trol software is a proprietary Wirtgen development. veyor is not required. For more information, call 615/501-0600 The AutoPilot system utilizes a computer integrated in the machine, as well as a con- or visit www.wirtgenamerica.com. (This story also can be found on trol panel that allows intuitive operation. For course control, two machine-mounted GPS Construction Equipment Guide’s Web site at receivers communicate with an additional www.constructionequipmentguide.com.)

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 20, 2014 • Page 81

Our rollers are pretty basic. Basically perfect. BOMAG improves on perfection with the BW120AD-4 roller. Want a roller that will finish the job better, faster and more efficiently? Then you want the BW120AD-4 from BOMAG. We took the top tandem-drum vibratory roller in its class and made it even better: A more powerful 33.8-hp diesel engine, a 14-percent faster working speed, and a larger operator’s platform with standard laterally sliding seat for better visibility. Improving perfection? That’s just the basics with BOMAG. To do the best job, you need the best equipment. To learn more visit www.bomag-americas.com, or call 1-800-78-BOMAG today.

THE COMPACTION EXPERTS

200 Erb Industrial Dr. Fenton, MO, 63026 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563

Cuba, MO 573/885-0500 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800

W250 N6851 Hwy 164 Sussex, WI 53089 262/246-5700 262/246-5719 Fax Madison, WI 608/222-9191

Eau Claire, WI 715/832-3443 De Pere, WI 920/338-5800 Abbotsford, WI 715/223-2381 Negaunee, MI 906/475-4181

10874 East Pike Rd. Cambridge, OH 43725 740-432-6303 www.southeasternequip. com Evansville, IN 47715 812-476-7321 Fort Wayne, IN 46808 260-483-8868 Indianapolis, IN 46268 317-872-4877

Burlington, KY 41005 859-586-6133 Holt, MI 48842 517-694-0471 Novi, MI 48374 248-349-9922 Brilliant, OH 43913 740-598-3400 Brunswick, OH 44212 330-225-6511

Dublin, OH 43016 614-889-1073 Gallipolis, OH 45631 740-446-3910 Heath, OH 43056 740-522-3500 Mansfield, OH 44903 419-529-4848 Marietta, OH 45750 740-374-7479

Mentor, OH 44060 440-255-6300 Monroe, OH 45050 513-539-9214 North Canton, OH 44720 330-494-3950 Perrysburg, OH 43551 419-874-0331 Troy, OH 45373 937-416-6397

1400 W. Ogden Ave. Naperville, IL 60563 630/355-7150 Rockford, IL 815/961-3160 South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Rockdale, IL 815/730-9011

Page 82 • December 20, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

ROLAND MACHINERY

A GOMACO 9500 trims grade on the new four-lane Highway 20 project in Iowa.

GOMACO 9500 Features Exclusive G+ The 9500 trimmer is the latest machine in GOMACO’s full line of concrete paving equipment to receive its proprietary and exclusive G+ control system and G+ Connect. G+ on the 9500 also brought about other updates on the machine. The wiring in the 9500 operator’s console has been redesigned and reorganized, rear steer control is now offered for the first time, trimmer load control can now be monitored on a digital readout, and several other features have been added with G+ for the ultimate operating experience. The 9500 trimmer’s applications include trimming, concrete and asphalt placing, and shoulder trimming. G+ on the 9500 allows an updated CAN-based operator’s remote control with a digital machine control display. The new remote features soft push pads for selection buttons for conveyor control and travel and steering. A joystick on the remote allows for new proportional control and movement of the 9500’s discharge conveyor. Connections for the operator’s remote control are located at the front and rear of the operator’s platform. The 9500 now features two ground level remotes. The G+ MiniMote assists in connecting the trimmerhead or hopper, and loading the machine. The second new remote is for the 9500’s hopper when the machine is being used as a concrete placer. The operator can use it to control the hitch when locking onto dump trucks, vibration in the hopper, and raising and lowering the machine to adjust the height

of the hopper. Both of the ground remotes can be operated from either side of the 9500. The 9500 now has rear steer control allowing it to easily and accurately back up on stringline. It also has a digital readout for trimmerhead load control. The readout shows pressure and flow during the trimming process and will automatically slow the machine down during a heavy trim. The 9500 will operate on stringline, 3D stringless controls and G+ features an entire library of sensor capabilities for controlling slope, grade and steer with setup configurations for any project requirement. This includes 3D stringless systems, laser controls, sonic sensors, rotary sensors, slope sensors, and all of their set-up requirements. Just connect to G+ Connect and the G+ controller automatically recognizes the control system and allows two-way communication. Within the console of the 9500 you’ll see the results of GOMACO’s new wiring management initiative. The goal of the initiative is cleanliness, easy to follow labeling, reorganization and the redistribution of wiring. The goal was accomplished. The 9500’s G+ console features a master controller assembly and power distribution center for fast and precise control with clean and orderly wiring and labeling for easy troubleshooting. The design layout of the console has also been reorganized with the hydraulics separated from the electronics. Two sliding and locking covers protect the panels.

The two-track 9500 with frontmounted trimmer allows trimming to the end of each pass or within inches of obstacles. The powerful single-drive, hydrostatic motor offers ultimate production. The steady, easily controlled travel speed guarantees accurate trimming and jobsite mobility. The 9500 can make a 360 degree turn within its own length for maximum maneuverability around a job site that has challenging conditions. The 9500’s rear conveyor has a 36 in. (91 cm) wide belt and a 34.7 ft. (10.6 m) long reach during machine operation, and a conveyor belt speed of 504 ft. per minute (153.6 mpm) allows fast placing of concrete or removal of trimmed material. The rear conveyor has a 160 degree swing with hydraulic height adjustment up to 12 ft. (3.7 m). The optional hydraulically folding rear conveyor allows jobsite mobility, safe operation, and transportability. The 9500 is user-friendly and operator safe with an operator’s station that is efficient and allows visibility over the entire operation. All GOMACO machines featuring the G+ control system have an operator’s horn and a back-up alarm. The operator’s remote control has an emergency stop button on the side and there are several emergency stops located around the 9500. For more information, visit www.gomaco.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Springfield, IL 217/789-7711 Carterville, IL 618/985-3399 Portage, IN 219/764-8080 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 Eau Claire, WI 715/874-5400 DePere, WI 920/532-0165 Deforest, WI 608/842-4151 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898 2600 S. Lincoln Rd. Escanaba, MI 906/786-6920 Fax: 906/786-5813

TITAN MACHINERY - BISMARCK 1500 Industrial Dr. Bismarck, ND 58501 701/250-7925 • 800/247-1282 Fax: 701/250-7924 3079 Energy Drive Dickinson, ND 58601 701/227-5309 • 888/418-2873 Fax: 701/225-9078 4001 38th Street SW Fargo, ND 58104 701/237-3333 • 800/342-4330 Fax: 701/237-3336 1601 North Washington St. Grand Forks, ND 58203 701/775-8111 • 800/962-7410 Fax: 701/775-8108 5015 Hwy 2 East Minot, ND 58701 701/852-3188 1741 Deadwood Ave. Rapid City, SD 57702 605/388-0266 • 888/388-0266 Fax: 605/388-9210 4201 N. Cliff Ave. Sioux Falls, SD 57402 605/336-3434 • 800/262-5373 Fax: 605/336-3456 13954 West Front Street Williston, ND 58801 701/577-0024 • 877/570-4635 Fax: 701/577-0027

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 20, 2014 • Page 83

“WINTER” is Coming - Are You Ready ? CASEY EQUIPMENT COMPANY www.casey-equipment.com 1603 East Algonquin Rd. Arlington Heights, IL 60005 847/437-8686 Fax: 847/437-8738 16754 New Ave. Lemont, IL 60439 630/257-1261 Fax: 630/257-0614 1548 Huntwood Drive Cherry Valley, IL 61016 815/332-8222 Fax: 815/332-3056

RMS RENTALS 12520 Quentin Ave S. Suite 100 Savage, MN 55378 952/895-9595 800/888-9515

3000 Force Feed Loader

It’s your Year-Round Workhorse If you can windrow it, this is a fast low cost way to load it. Snow

ROAD MACHINERY & SUPPLIES CO. 5633 W Hwy 13 Savage, MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia, MN 218/741-9011 800/752-4304 Negaunee, MI 906/475-6488 800/888-9565 Sioux City, IA 217/252-0538 800/633-9104 Des Moines, IA 515/282-0404 800/555-1445 Cedar Rapids, IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

Roadside Ditch Cleaning

Street Leaf Pickup

Asphalt Milling

Track and Feedlot Pickup

Road Shoulder Pickup

Another LeeBoy Year Round Workhorse - Graders.

VT LeeBoy, Inc.

500 Lincoln County Pkwy Ext., Lincolnton, NC 28092

Call 704.966.3300

www.LeeBoy.com

Page 84 • December 20, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

The Worldwide Leader in Concrete Paving Technology Announcing Our New Distributor in Arizona

info@gomaco.com ❘ www.gomaco.com CONCRETE STREETS AND HIGHWAYS ❘ AIRPORT RUNWAYS ❘ CURB AND GUTTER ❘ SIDEWALKS RECREATIONAL TRAILS ❘ SAFETY BARRIER ❘ BRIDGE PARAPET ❘ BRIDGE DECKS ❘ IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA ❘ THE WORLDWIDE LEADER IN CONCRETE PAVING TECHNOLOGY ❘ 712-364-3347

ROAD MACHINERY & SUPPLIES CO.

SWANSTON EQUIPMENT COMPANY

Des Moines, IA 515/282-0404 • 800/555-1445 Sioux City, IA 712/252-0538 • 800/633-9104 Cedar Rapids, IA 319/363-9655 • 800/616-6615 Milan, IL 309/787-1742 • 800/633-9114

3450 West Main Fargo, ND 58103 800/369-0371 4100 Hwy-52 South Minot, ND 58701 800/210-8766

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 20, 2014 • Page 85

ROLAND MACHINERY DePere WI 920/532-0165 Fax: 920/532-0526 Deforest WI 608/842-4151 Franksville WI 262/835-2710 Schofield WI 715/355-9898

Eau Claire, WI 715/874-5400 Escanaba MI 906/786-6920 Springfield, IL 217/789-7711 Marengo, IL 815/923-4966

Bolingbrook IL 630/739-7474 Carterville, IL 618/985-3399 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252

Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 Portage, IN 219/764-8080

BRANDEIS MACHINERY & SUPPLY COMPANY 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 • Fax: 502/499-3195 www.brandeismachinery.com Evansville, IN 812/425-4491 • Fax 812/425-1171 Corbin, KY 606/528-3700 • Fax 606/528-9014 Lexington, KY 859/259-3456 • Fax 859/254-0783

Stanville, KY 606/478-9201 • Fax 606/478-9208 Paducah, KY 270/444-8390 • Fax 270/575-4907 Indianapolis, IN 317/872-8410 • Fax 317/872-8417 Ft.Wayne, IN 260/489-4551 • Fax 260/489-1620

MURPHY TRACTOR & EQUIPMENT CO. www.murphytractor.com Des Moines, IA 800/822-2212 Fort Dodge, IA 800/362-2487 Sioux City, IA 800/352-4693 Waterloo, IA 800/772-2019

Dodge City, KS 800/794-0172 Great Bend, KS 800/264-4056 Park City, KS 800/262-0139 Topeka, KS 800/279-6087

Ulysses, KS 800/472-9238 Kansas City, MO 888/306-3434 Springfield, MO 888/306-2656 Gering, NE 800/205-6784

Grand Island, NE 800/868-4017 Lincoln, NE 800/416-5518 North Platte, NE 800/894-7060 Omaha, NE 800/416-5095

Page 86 • December 20, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

866-430-7539

www.jfwequipment.com sales@jfwequipment.com

Serving the Asphalt Industry for 25 Years 1999 Etnyre Centennial Distributor, 2000 gallons, computerized w/1 ft cut-offs, propane heat, 12 ft spray bar, 1999 Freightliner FL70 w/Cummins 5.9L diesel engine, 5 spd trans, 2 spd axle, air brakes, a/c, 33,000 GVW

2014 MARATHON MM120PT, 120 gallon mastic mixer for rubberized crack filler/mastic mixer, propane powered and heated, oil jacketed material vat, automatic temperature control, full sweep hydraulic agitation, reverse loading doors for safety, overnight heater, propane torch, tool heater.

1999 Blaw Knox PF 5510 Paver, Ultimat 10-20 electric screed, Cummins power crown & slope, tracks about 50%

2000 Etnyre K Chip Spreader, 10-20 ft extendable spread hopper, front wheel drive, hydrostatic drive, computerized, Cummins 8.3L diesel engine 230 hp, 2000 Athey 7-12 Force Feed loader, hydrostatic drive, hydraulically powered sliding control panel and seat, J.D. diesel engine, 28 ft conveyor, a/c & heat, radio, rear tires 60%+, front tires 60%, belts in good condition belt & tires in good condition

2014 Marathon KERA10 Crack Sealer, New Marathon KERA10 walk behind crack sealer, 10 gallon material vat, full wrap around oil jacket, manual full sweep agitation, burner with flame out protection, oil temperature gauge, material temperature gauge, front caster wheel, heated 3/4" discharge valve

2005 Caterpillar AS2301 Screed, Caterpillar Screed low hour take off, 10 - 18 1/2 feet, diesel heat, power crown & slope

McAllister Equipment Co.

Road Machinery & Supplies Co.

12500 S. Cicero Ave. Alsip, IL 60803 708/389-7700

Cedar Rapids, IA 319/363-9655 800/616-6615

Duluth, MN 218/727-8611 800/888-9535

Villa Park, IL 630/530-7600

Des Moines, IA 515/282-0404 800/555-1445

5633 W Hwy 13 Savage, MN 952/895-9595 800/888-9515

Rockford, IL 815/227-0555 East Peoria, IL 309/694-4455 Springfield, IL 217/789-0351

2008 Volvo DD138HFA Roller, 84" double drum high frequency vibratory roller, Cummins 6.7L 173 hp diesel engine, double drum drive, scrapers, water system, ROPS canopy

1995 Rosco SPRH-H Chip Spreader, hydrostatic drive, Cummins 5.9L diesel engine, 12 ft spread hopper w/platform

3517 Wayne White Rd., Climax, NC 27233

Sioux City, IA 712/252-0538 800/633-9104

Virginia, MN 218/741-9011 800/752-4304

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 20, 2014 • Page 87

DePere, WI 920/532-0165

Schofield, WI 715/355-9898

Escanaba, MI 906/786-6920

Bridgeton, MO 314/291-1330

Columbia, MO 573/814-0083

Deforest, WI 608/842-4151

Eau Clair, WI 715/874-5400

Springfield, IL 217/789-7711

Cape Girardeau, MO 573/334-5252

Palmyra, MO 573/769-2056

Franksville, WI 262/835-2710

Carterville, IL 618/985-3399

Portage, IN 219/764-8080

100 Sheridan Ave. Des Moines, IA 50313 515/282-0404 800/555-1445

2525 16th Ave SW Cedar Rapids, IA 52406 319/363-9655 800/616-6615

1400 North Hwy 75 Sioux City, IA 51105 712/252-0538 800/633-9104

606 W. 10th Ave. Milan, IL 61264 309/787-1742 800/633-9114

Page 88 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Fenton, Mo.,...

CLASSIFIEDS Classified Rates:30 Words or Less for $30.00. Each Additional Word is $1.16. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 ASPHALT EQUIPMENT

CRAWLER TRACTORS

LOADERS

Asphalt Rollers

Crawler Tractors

Backhoe Loaders

2008 Dynapac CC-900 with (2) double drum 36'' vibrating rollers for general compaction. Never used in asphalt. Water tank and spary bars. 349 total hours since new. New condition ..................................$19,500.

1983 Dresser TD20E, Cab, 24'' Tracks, Good condition............ ..................................$34,500.

2008 Yanmar CBL40, PTO, 3 pt hitch, backhoe, great condition, 216 hours. ............CALL.

Located in Hallock, MN 218-843-1023

913-371-3822 2003 Caterpillar D6R XL, A/C, Sweeps, 24'' Tracks, Good condition, 14,470 hours ................ ................................$104,500. 913-915-1607

CRANES Conventional Truck Cranes

EXCAVATORS

2011 National NBT45, 142' of hydr. stick, 55' jib, radio remote controls, 2-man steel platform & test weights, good condition ................................$369,900.

Hydraulic Excavators 2011 Doosan DX180N, Narrow Track Excavator, Good condition, 2744 hrs...........$109,400.

Aspen Equipment Co. 612-719-2009

Gibson Machinery, LLC 440-439-4000

Vermeer Sales & Service 641-628-2000

MATERIAL HANDLERS Material Handlers 1999 Daewoo 5450-III, Material/Scrap Handler, Fair condition, 6,170 hours ............ ................................$145,000. Gibson Machinery, LLC 440-439-4000

Mike Willhelm Joins Luby as Trench Safety Sale Rep Luby Equipment Services announced that Mike Willhelm has joined the company as the trench safety sales representative at the Fenton, Mo., location. In his new position, Willhelm is responsible for Luby’s trench shoring system sales and rentals across its entire territory in Missouri and Illinois. “We are excited to welcome Mike to the Luby team,” said Bob Luby, president of Luby Equipment Services. “His knowledge and expertise in this field ensure our customers have the correct trench shoring systems for any situation.” Willhelm has worked in trench safety since 1997 when he was employed by a shoring system dealer in St. Louis. He has extensive experience advising utility contractors on shoring systems while laying pipe for water and gas departments. For more information, visit www.lubyequipment.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Booster Provides Necessary Head to Pump 90 Ft. Distance PANORAMA from page 40

DO YOu Have a Few Pieces OF HeavY equiPmeNt tO seLL? Construction Equipment Guide is THE Place to List It!

ONLY

$30

2 INSERTIONS IN ONE REGION (Northeast, Southeast, Midwest, West) 30 words or less - $1.16 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database. You must have a classified print ad to do so.

Call 800-523-2200 or go online to place your ad:

www.constructionequipmentguide.com/pages/customer/classifieds.asp and place your ad through our website and we will contact you!

Mike Willhelm is responsible for Luby’s trench shoring system sales and rentals across its entire territory in Missouri and Illinois.

booster and dredge, which allow the units to be operated at any time of day without disturbing residents. • Wireless Radio Telemetry system, which allows two-way control and communication of the barge-mounted booster station by the dredge operator. • Solar-Powered Wireless Radio Telemetry Repeater Station, which triangulates the Radio Telemetry System and allows the dredge and booster station to communicate when “line of sight” radio signals are not possible. • Vibration sensor on the barge-mounted booster station to detect vibrations caused by an obstruction in the booster station pump impeller, which in turn alerts the dredge operator utilizing the Wireless Radio Telemetry System. “Having previously owned an older model of the Barracuda, when we started talking about features, we were really impressed with the upgrades that DSC had already incorporated into the newer model,” said Rutledge.

“We ordered our dredge in the fall of 2012, but didn’t need it delivered until the spring of 2014. DSC was very accommodating, and made sure that we had it ready for the 2014 season and that we didn’t need to make changes mid-season,” comments Rutledge. A crew from DSC traveled to Lake Panorama with the delivery of the dredge to assemble it and be available for training on the new features. Lake Panorama also has access to DSC technical assistance directly from the dredge through a wireless connection, which allows DSC to see an issue as it is happening and offer remote troubleshooting guidance. DSC Dredge, LLC, advances the engineering, automation, manufacturing and quality of cutter suction and underwater pump mining dredges. The company operates from three major manufacturing facilities located in Reserve, La., Poplarville, Miss., and Greenbush, Mich. For more information, visit www.dscdredge.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 89

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $105, Color Ad $155 More Bargains on pg 90

“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 3500 models of construction equip. PNEUMATIC AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states .............................................................Call

Summit Supply LLC 888-888-1248 • sales@summittracks.us 25-26 TM

2006 Gehl 7810 Turbo, 115HP, 2260 Hrs, 3675 Lb Lift, 84” Bkt, 2 Speed..................................$30,900 Call Scharber & Sons 763-428-4107 26-1 PK

New Compact Excavators ....Starting at $41,000 Call Dan 612-306-4496 26-1 PK

Used 2010 S630 Bobcat Skid Loader, 74.3HP TurboDiesel, 549 Hrs, Tires Like New, 2-Speed, High-Flow, Cab w/Heat/AC, Switchable Controls, Stereo, Power Bob-Tach, Deluxe Instrumentation ...............................................$33,800 Top Notch Equipment 763-398-0079 25-26 PK

2013 Takeuchi TB016, 300 Hrs, OROPS, Hyd Thumb, Coupler, Rubber, 7’9” Dig Depth, 3500# Capacity.....$28,950 Call Steve Samosky • 262/373-2151 26 JM

2005 Takeuchi TL140, 2970 Hrs, Cab, 81 HP, 76” Bkt, 18” Rubber Tracks ...........................................................$24,250 Call Steve Samosky • 262/373-2151 26 JM

2004 Cat 320LC, 9350 Hrs, Hyd Cplr, Hyd Kit, 54” Bkt, 9’8” Stick, 33’ Reach, 48,000# .........................................$66,750 Call Steve Samosky • 262/373-2151 26 JM

1998 New Holland LX885, 1800 Hrs, 72” Tooth Bkt, 2200# Capactiy, 60 hp, 2 Speed, New Engine......................$11,400 Call Steve Samosky • 262/373-2151 26 JM

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. Call McLaren 888-492-4230 26-1 DH

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. Call McLaren 888-492-4230 26-1 DH

2012 Wacker WL50, 300 Hrs, Cab, A/C, Hyd Cplr, 75” .98 Cy Bkt, 10,660 Lbs, Articulated.................................$60,420 Call Steve Samosky • 262/373-2151 26 JM

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. Call McLaren 888-492-4230 26-1 DH

2012 Wacker 28Z3, 75 Hrs, OROPS, Coupler, Aux. Hyd, Rubber, 9’ Dig Depth, 5680 Lbs................................$32,710 Call Steve Samosky • 262/373-2151 26 JM

2004 Cedarapids 452, Front Wheel Assist Topcon Electric 20’ Screed, 5546 Hrs..........................$87,500 Call 605-336-0411 25-26 PK

2008 Cat 305C CR, Hyd. Thumb, Blade, 2300 hrs.. ....................................................................$36,500 Courts Machinery • 507/678-2752 26-1 PK

2008 70 Ton Liddell Drop Side Deck Lowboy Tri-Axle Trailer, Tandem Two-Axle Jeep, Two-axle Nitro Stinger with Motor ......................................................................$190,000 Sun Piledriving Equipment 302-539-7187 25-26 BB

2006 Ditch Witch FX60 Vacuum Excavator, 800 gal spoils capacity, 200 gal water tank, 4 cylinder Cummins engine, 3251 hours ..............................................$32,500 25-26 EB Call Tania 614-443-9751 x237

New Side-Entry JCB Skids. Priced to Move Call Don 316-943-9311

Deere 320D, 805 Hrs, Hand Controls, Std. Hyd, Cab, Air, Radio.........................................................................$30,000 Call Don 316-943-9311 26 JM

2007 Ditch Witch XT1600, 221 Hrs, Tracks at 90%, Excellent Condition ................................$49,500 Call Tim 630-665-5600 26 JM

26 JM

Page 90 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $105

2010 Gehl V270 Vertical Lift Skid Loader, Like New, One Owner, 785 Hrs, OROPS, ISO Joystick Controls, 74” 22.8 Cu. Ft. HD Bkt, Custom Radiator Guard, Super Nice Machine! .......................................$29,900 Call George 219-696-8911 26 JM

2012 Case SR250, s/n JAFSR50VBM434310, 750 Hours, Cab w/ Heat & AC, BIc High-Flow, 12 x 16.5 Tires, 72 “ Bucket ...............................$39,500 Call Mark 630-739-7770 26 JM

2011 Case SR250, s/n JAFSR250LCM44755, 1150 Hours, Cab w/Heat & AC, Bic High-Flow, 12 X 16.5 Tires, 78” Bucket........................$39,500 Call Mark 630-739-7770 26 JM

1991 John Deere 300D, S/N 775834, Open ROPS ....................................................................$19,000 Call 502/456-4050 Ask for Lynell or Albert 25-26 EB

1997 Volvo A30C, s/n A30CV2688, 11,070 Hrs, 4 Spray Heads, Hose Reel w/Nozzle, Hyd. Driven 2011 Case 580SN, s/n JJGN58SNKAC536021, Water Pump, Volvo TD103KBE Engine, 289 Adv. 2480 Hours, Cab w/Heat & AC, Extenda-hoe, Ride Control, Two Lever, 4 in 1 Bucket. Aux Hyds, 12”,18” Horsepower, 1-2-3-D Speed, in Cab Controls, A/C.. & 24” Buckets..............................................$59,900 ....................................................................$75,000 Call David 219-696-5680 26 JM 26 JM Call Mark 630-739-7770

1981 Grove Rt 755, 55 Ton S/N # 49225, Cummins Rebuilt, 110’ Main Boom, 32’ Jib, Auxilliary Hoist, 5 Sheave Block, Cleveland Ohio Call Andy 216-316-1511 25-26 EB 1993 Grove Rt 422, 22 Ton S/N # 78334, Cummins 4 Cyl 12,100 Hours, 3 Speed Transmission, 27’-70’ Main Boom, 25’-43’ Jib, Auxilliary Hoist,17.5 X 25 Tires, Ball, New Rotec, Boom Scope Cylinder Rebuilt, Fresh Grove Paint, Cleveland Ohio Call Andy 216-316-1511 25-26 EB

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

1979 Cat 623B Scraper, canopy, cushion hitch, elevating chain, front tires pretty good condition, back tires fair condition, running machine, 5,942 hrs, s/n 46P006980 ....................................$23,500 Call Leroy 330-674-8344

25-26 AP

• Cost is $105 per ad, $50 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States.

1997 Cat 320BL, 9,750 hrs, hydraulic coupler, new rails & segments, 31.5” pads, 24” bucket w/ thumb . ....................................................................$36,500 Call Leroy 330-674-8344

25-26 AP

For more information, call Construction Equipment Guide today at

Next Issue Closes

800/523-2200

December 22nd

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 91

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted KUBOTA BUCKET LOADER ATTACHMENT FOR B7100 HST 4X4 | NEED A FRONT END BUCKET LOADER COMPLETE FOR A KUBOTA MODEL B71004X4 HST TRACTOR. CONTACT: ERICH DIENER PHONE: 479-785-9669 EMAIL:SUNBELTSALES@EARTHLINK.NET –––––––––––––––––––––––––––––––– LOW HRD 24M GRADER. IF YOU HAVE ANYTHING AVAILABLE PLS SEND IT TO OUR EMAIL INCL PICTURES, HRS AND PRICE. THANKS CONTACT: JERRY PHONE: 0031227570364 EMAIL: INFO@EMO-MAC.COM –––––––––––––––––––––––––––––––– BOBCAT S250 / BOBCAT T195/ BOBCAT T650 | HELLO, LOOKING FOR BOBCAT SKID STEER. MODEL NUMBER S250, T195 OR T650 WITH FORK BUCKET. PLEASE, CONTACT ME. THANKS, HEATHER CONTACT: CONTEK LLC PHONE: 678-585-4651 FAX: 404-549-4670 EMAIL:INFO@GOCONTEK.COM –––––––––––––––––––––––––––––––– TRENCH BOXES MANHOLE BOXES | WANTED, TRENCH AND MANHOLE BOXES, LET ME KNOW WHAT SIZE AND PRICE AND LOCATION, WILL RESPOND TO ALL. CONTACT: DENNIS PHONE: 1-520-798-3220 FAX: 1-520-798-0740 EMAIL:DENNIS@ OLEARYCONSTRUCTIONAZ.COM –––––––––––––––––––––––––––––––– ELECTRIC WALK BEHIND SAW | ELECTRIC SINGLE PHASE, 18" WALK BEHIND SAW. EDCO, CORE CUT. CONTACT: JOHN PHONE: 314-486-3924 FAX: 636-519-7378 EMAIL:JGDLANDMAN@AOL.COM –––––––––––––––––––––––––––––––– 48 INCH ROCK SAW | LOOKING FOR A ROCK SAW CONTACT: RICHARD DEAL PHONE: 864-473-0194 FAX: 864-473-0195 EMAIL:DEALASPHALT@YAHOO.COM –––––––––––––––––––––––––––––––– WE BUY EQUIPMENT MANUALS | WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT, TRUCKS AND VEHICLES OF ALL SORTS. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL US. CONTACT: GRACE FRANCES PHONE: 270-849-2270 EMAIL: TRITOWN1@MSN.COM ––––––––––––––––––––––––––––––––

VOLVO MC70B | SKID STEER LOADER CONTACT: KEN PHONE: 401-743-6200 EMAIL: CARKEN06@VERIZON.NET –––––––––––––––––––––––––––––––– AIR COMPRESSOR | 85-150 CFM TOW BEHIND CONTACT: ROGER BUTTON PHONE: 315-729-1913 FAX: 315-252-7367 EMAIL:RBSIGNMAN@MSN.COM –––––––––––––––––––––––––––––––– TRAILERS | LOOKING FOR USED 60 TO 70 TON TRAILERS. NOT FOR OVER THE ROAD NO STINGERS OR JEEPS. CONTACT: RICHARD JAMISON PHONE: 443-695-5902 EMAIL: RAJ@RUXTONSERVICES.COM –––––––––––––––––––––––––––––––– T800 KENWORTH DUMP TRUCK 20042012 CONTACT: ERMIAS PHONE: 301-755-7697 EMAIL: ERMIAS.TURI@YAHOO.COM –––––––––––––––––––––––––––––––– JOHN DEERE 300C ARTICULATED DUMPTRUCK | LOOKING FOR GOOD USED MOTOR FOR A JD 300C UNIT. THANKS CONTACT: JUAN MONTANEZ PHONE: 830-325-2529 EMAIL: MONTANEZJUAN@MSN.COM –––––––––––––––––––––––––––––––– CAT MOTOR GRADERS | WE NEED RUNNING OR NON-RUNNING CAT MOTOR GRADERS 12G, 14G, 14H, 140G & 140H. CONTACT: RIZ PHONE: 832-528-0786 EMAIL: RIZ@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– TERRAMITE T5C BACKHOE | USED TERRAMITE T5C CONTACT: WYATT HARSHBARGER PHONE: 14172943359 EMAIL:HEWEYLEWEY18@GMAIL.COM –––––––––––––––––––––––––––––––– CASE 580 SUPER M 4X4 EXTENDAHOE CAB HEAT AND AIR | GOOD USED CASE SUPER M EXTENDAHOE 4X4 CAB W/HEAT AND AIR, LOW HOURS CONTACT: KENNETH L.SLOAN PHONE: 913 915-0447 FAX: 913 898-2343 EMAIL: SLOANCONSTRUCTION@YAHOO.COM –––––––––––––––––––––––––––––––– BURCHLAND SILT FENCE INSTALLER | BURCHLAND XTS SILT FENCE INSTALLER WITH 72" OFFSET BAR. CONTACT: MIKE PHONE: 252-207-8964 FAX: 252-261-5425 | EMAIL: MIKE@WMDUNNCONSTRUCTION.COM –––––––––––––––––––––––––––––––– AIR COMPRESSOR | 85-150 CFM COMPRESSOR CONTACT: ROGER BUTTON PHONE: 3157291913 EMAIL: RBSIGNMAN@MSN.COM ––––––––––––––––––––––––––––––––

CAT 70/100/110/120 EXCAVATORS | LOOKING FOR CAT 70/110/120 EXCAVATORS-- PREFER UNADVERTISED CONTACT: EDDIE GREEN PHONE: 864-327-3909 EMAIL: EDDIE@BRUCEEQUIPMENT.COM –––––––––––––––––––––––––––––––– CAT EXCAVATORS | WE ARE LOOKING TO BUY CAT EXCAVATOR 330BL. CONTACT: RIZ PHONE: 832-528-0786 EMAIL: RIZ@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– OLDER 90/120 PRENTICE LOG LOADER | AN OLDER LOADER TO MOUNT ON TRUCK OR TRAILER. STRONG ENOUGH TO LOAD 16/17-9 BULKLOGS 1 OR 3 AT A TIME CONTACT: RUSTY COOK PHONE: 850-381-3005 EMAIL: RUSTYWAYNECOOKSR.4345@GMAIL.COM –––––––––––––––––––––––––––––––– KUBOTA KH35 | LOOKING FOR SPROCKETS, BEARINGS AND RIGHT SIDE COVER FOR FINAL DRIVE CONTACT: LEON PHONE: 781-389-0773 EMAIL: TERBUP@YAHOO.COM –––––––––––––––––––––––––––––––– COMMERCIAL TRUCKS | LOOKING TO BUY ANY AND ALL SALVAGE, STOLEN, WRECKED OR HIGH MILEAGE HEAVY DUTY TRUCK, IN TEXAS, LOUISIANA, OR OKLAHOMA. CONTACT: BILL B PHONE: 281-745-7342 FAX: 713-675-1195 EMAIL:WABALDWIN@LKQCORP.COM –––––––––––––––––––––––––––––––– CASE BACKHOES | 3. WE ARE LOOKING TO BUY 2WD CASE BACKHOE 580E/SE/M/SM/K/SK/L/SL. CONTACT: STEVE PHONE: 832-528-0786 EMAIL: STEVE@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– WE BUY EQUIPMENT MANUALS | WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS, BUT NOT INCLUDED TRUCKS AND VEHICLES. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. PLEASE CALL OR EMAIL US. CONTACT: GRACE FRANCES PHONE: 2708492270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– 30 INCH PADS TO FIT JOHN DEERE 120 C EXCAVATOR, HAVE 24 INCH...COULD TRADE. CONTACT: JIM BLEDSOE PHONE: 816 324-5254 EMAIL: BLEDSOEM255@GMAIL.COM ––––––––––––––––––––––––––––––––

14 FT UTILITY TRAILER | 14 FT. FLAT BED SINGLE AXLE USED EXCELLENT CONDITION UTILITY TRAILER. TRAILER TO HAUL A 12 FT.POLARIS. MAX. PRICE $1000.00 CONTACT: TOM EMAIL: AZSUNSET60@SUDDENLINK.NET –––––––––––––––––––––––––––––––– USED WELDER GAS/ROCK BOX | USED GAS MILLER WELDER/ 12 YARD ROCK BOX CONTACT: VERNON PHONE: 8285578196 EMAIL: GRIBBLEVT@ CABLEYVONLINE.NET –––––––––––––––––––––––––––––––– JCB 208S | LOOKING FOR A NICE 208S JCB MACHINE WITH CAB AND HEAT AND SNOW BLOWER.. MACHINE IS MOST IMPORTANT TO ME CONTACT: KEN TEMBORSKI PHONE: 570.233,0351 FAX: 570.233.2399 EMAIL:AGGRESSIVEKEN@EPIX.NET –––––––––––––––––––––––––––––––– CAT ENGINE AND DOZER | NEED A CAT ENGINE 3406 OR 3408 FOR A CAT LOADER AND OLDER MODEL D8K AT WHOLESALE WITH OR WITHOUT RIPPER CONTACT: SANTIAGO SCARZELLA PHONE: 305 506 4263 EMAIL: SSCARZELLA@GMAIL.COM –––––––––––––––––––––––––––––––– ANY BRAND | USED FRONT END LOADERS.4X4.PRICE UNDER $5,000 CONTACT: EDWARD THORNTON PHONE: (810)210-2002 EMAIL: EDWARDTHORNTONJR@YAHOO.COM –––––––––––––––––––––––––––––––– TLB CONTACT: JONAS PHONE: 0726389111 EMAIL: MALAKASFBX@GMAIL.COM –––––––––––––––––––––––––––––––– KUBOTA S5205 WHEEL LOADER CONTACT: JOHN T. HUDSON PHONE: 601-606-2223 FAX: 601-794-2734 EMAIL:HUMMERL@COMCAST.NET –––––––––––––––––––––––––––––––– CAT D8T | 5000 HOURS MAX, CAB, DRAWBAR, SU/T BLADE, SYSTEM ONE U/C. MUST BE CLEAN TRACTOR WITH VERY GOOD UNDERCARRIAGE CONTACT: BUZZY KEITH PHONE: 404-610-6754 EMAIL: BUZZY@USAMACHINERY.COM –––––––––––––––––––––––––––––––– BOBCAT/SKIDSTEER | I NEED A RUNNING BOBCAT. I AM WILLING TO PAY $2500-$3000. HAVE CASH IN HAND. BOISE IDAHO, WILL PICK UP. A COUPLE HUNDRED MILES DRIVE IS ACCEPTABLE. CONTACT: WILLIAM RESNER PHONE: 208-968-8968 EMAIL: WRESNER83@GMAIL.COM ––––––––––––––––––––––––––––––––

CAT WHEEL LOADERS AND CAT MOTOR GRADERS | . MEGA EQUIPMENT INC. IS LOOKING TO BUY CAT WHEEL LOADERS 910, 920, 930, 936 & 936E.. MEGA EQUIPMENT INC. IS LOOKING TO BUY CAT MOTOR GRADERS 12G, 14G, 14H, 140G & 140H. CONTACT: RIZ PHONE: 281-491-0614 EMAIL: RIZ@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– USED CAT 953 TRACK LOADER CONTACT: DANNY EVERHART EMAIL: DANNY.EVERHART@YAHOO.COM –––––––––––––––––––––––––––––––– CAT | SEND PICTURES, DETAILS, AND PRICE. IF YOU HAVE ANY OF THE FOLLOWING : WHEEL LOADER CAT 936E CAT 950B CAT 950E CAT 966D CAT 966E 966F;966F;980C;980F KOMATSU WA6003;WA700-3 12G;14G;14H D8R;D9N;D9R WITH RIPPER 330BL CONTACT: FRANK PHONE: 832-655-2921 FAX: 832-655-2921 EMAIL:HAWKMACHINERY@AOL.COM –––––––––––––––––––––––––––––––– TIMKEN BEARING, #252-310 AND M 252-349 NEW OR USED CONTACT: GARY SISK PHONE: 816-517-4531 FAX: 816-230-6264 EMAIL:DRILLERGARY@YAHOO.COM –––––––––––––––––––––––––––––––– BILLJAX ESCALADE UTILITY TRAILER | 3000 LB. MAX LOAD ESCALADE BILLJAX WITH HYDAULIC RAISING AND LOWERING BED FOR LIGHT WT. EQUIPMENT. I AM LOOKING FOR USED IN GOOD SHAPE CONTACT: RICK BOONSTRA PHONE: (616)293-9240 EMAIL: RICK.BOONSTRA@YAHOO.COM –––––––––––––––––––––––––––––––– RT CRANE | 2002/2006 30 TON ROUGH TERRAIN CRANE> GROVE, TEREX, LINKBELT, CLEAN + DRY CERTIFIED A PLUS A.S.A.P. CONTACT: DENNIS OPAT PHONE: 630-894-2778 FAX: 630-894-5063 EMAIL:DOPAT@CHICAGOCRANE.COM –––––––––––––––––––––––––––––––– TRAILERS | FLEET OR FLATBED OR STEPDECK TRAILERS CONTACT: WILLIE KIRCH EMAIL: WILLIEKIRCH@GMAIL.COM –––––––––––––––––––––––––––––––– LINCOLN AIR VANTAGE | WELDER AND AIR COMPRESSOR KUBOTA ENGINE CONTACT: RICK PHILLIPS PHONE: 4192330949 EMAIL: RPHILLIPS1961@LIVE.COM –––––––––––––––––––––––––––––––– BULLDOZER | I NEED TO BUY D9N BULLDOZER OR D9R MANUAL TRANSMISSION ASAP THANKS CONTACT: OUFI PHONE: 966530185141 EMAIL: ALOUFI01@HOTMAIL.COM ––––––––––––––––––––––––––––––––

USED CATERPILLAR EXCAVATOR | NEED A QUOTE FOR FAIRLY USED AND LOW HOURS EXCAVATOR OF 20-25 KG/TON CAPACITY (CATEPILLAR) CONTACT: RICHARD PHONE: +2348037215213 EMAIL: DAPOIDOWU@YAHOO.CO.UK –––––––––––––––––––––––––––––––– CASE 580 LOADER BACKHOES | CASE 580 LOADER BACKHOES 580 SK , 580 L, 580 SL, 580 M, 580 SM, 580 N, 580 SN CONTACT: FRANK @ TRICO EQUIPMENT PHONE: 1-800 TRICO 50 FAX: 732-780-3618 EMAIL:FHORAN@TRICOEQUIPMENT.COM –––––––––––––––––––––––––––––––– LOADER TIRE | LOOKING TO BUY 29.5X25 L5 LOADER TIRE WITH 80-85% WEAR TO MATCH OTHER TIRES. CONTACT: PHILIP DEMORANVILLE PHONE: 508-636-5771 FAX: 508 636 5707 EMAIL:PLD6000@YAHOO.COM –––––––––––––––––––––––––––––––– 3-5YD ROLL OUT / HIGH TIP BUCKET FOR WHEEL LOADER CONTACT: AUSTIN SEALS PHONE: 912-661-7820 EMAIL: AUSTIN.SEALS@ASCVOLVO.COM –––––––––––––––––––––––––––––––– UTILITY TRAILER | WORK TRAILERS CONTACT: FORAN AND ASSOCIATES PHONE: 9085816357 FAX: 9087307543 EMAIL:FORANANDASSOCIATES @GMAIL.COM –––––––––––––––––––––––––––––––– SKID SPRAYER EMAIL: NEWSOME1RN@GMAIL.COM –––––––––––––––––––––––––––––––– ASPHALT PAVERS | WE ARE LOOKING TO BUY SEVERAL UNITS OF ASPHALT PAVERS FROM ABG TITAN, DEMAG, DYNAPAC, AND VOGELE. IF YOU HAVE ANY, PLEASE SEND PICTURES, SERIAL NUMBER, CONDITION, LOCATION AND FINAL OFFER PRICE. CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL:AIMN@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– DOUBLE AXLE TRAILER | FITS 2.5/16 HITCH AND HAS AT LEAST 20FEET OF ROOM BY9FT CONTACT: GARYPOWELL PHONE: 217 691 5760 EMAIL: GARYPOWELL9028@COMCAST.NET –––––––––––––––––––––––––––––––– SCHWING CONCRETE PUMPS MOUNTED ON MACK TRUCKS 32METER TO 39 METER 1994 / NEWER CONTACT: WILLIAM CROSS PHONE: 407 595 8221 FAX: 407 843 0247 EMAIL:WILLIAM@CROSSPUMPING.COM –––––––––––––––––––––––––––––––– HAAS CNC W/4TH AXIS | 2X HAAS VF4 CONTACT: KEN YOSHIDA PHONE: 949-887-4701 EMAIL: KYOSH3@GMAIL.COM ––––––––––––––––––––––––––––––––

Page 92 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Atlantic City, NJ Sat., December 20, 2014 For: Late Model Rental Returns • Albany, NY Sat., December 27, 2014 For: Rental Fleet Construction Equipment & more • Columbus, OH Sat., January 10, 2015 For: Very Late Model Case & Cat Rental Return Auction & more • Houston, TX Thurs., January 22, 2015 For: Late & Great Rental Fleet Construction Equipment • Queretaro, Mexico Fri., January 23, 2015 For: Large Quantity Late Model Cat Construction Equipment • Kissimmee, FL January 31 – February 8, 2015 For: 22nd Annual Construction Equipment, Truck & more • Las Vegas, NV Fri., March 6, 2015 For: Large Rental Return Auction RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Las Vegas, NV February 6, 2015 • Houston, TX February 11-12, 2015 • Tipton, CA February 13, 2015 • Orlando, FL February 16-20, 2015 • Phoenix, AZ February 26, 2015 • Orlando, FL February 16-20, 2015 • Grande Prairie AB, CAN April 9-10, 2015

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com • Prince George BC, CAN May 6, 2015 • Lethbridge AB, CAN May 7, 2015 • Williston, ND May 20, 2015 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Riverside, CA Sat., December 20, 2014 For: Heavy Equipment & Commercial Truck Sales • Sacramento, CA Sat., January 10, 2015 For: Heavy Equipment & Commercial Truck Sales BIG IRON www.bigiron.com 800-937-3558 • ONLINE ONLY December 24, 2014 • ONLINE ONLY December 31, 2014 CAT AUCTION SERVICES www.catauctions.com 866-750-9432 • Kissimmee, FL Fri., February 13, 2015 For: Construction Equipment COCHRAN AUCTIONS www.cochranauctions.com 301-739-0538 • Boonsboro, MD January 2-3, 2015 For:2 Day Winter Contractors Regional Equipment, Truck & Trailer Auction

HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252 • Livingston, LA January 29-31, 2015 For: Construction Equipment, Trucks & Tractors IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid! • ONLINE ONLY January 7, 2015 • ONLINE ONLY January 27-29, 2015 J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • Dallas, TX Thurs., January 29, 2015 For: Heavy Equipment • Philadelphia, PA Sat., January 31, 2015 For: Heavy Equipment MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888 • Pelzer, NC Wed., January 28, 2015 For: Construction Equipment & Truck Auction

LLOYD MEEKINS & SONS AUCTION COMPANY www.meekinsauction.com 800-499-6560 • Lumberton, NC Tues., December 30, 2014 For: 20th Annual Contractors Auction • Pinetops, NC January 28-29, 2015 For: Absolute Auction featuring Equipment & Trucks from Trico Electric Co MENDENHALL AUCTION CO., INC. www.mendenhallauction.com 336-889-5700 • High Point, NC Sat., December 20, 2014 For: Contractor & Municipal Equipment & Truck Auction PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com 860-642-4200 • North Franklin, CT December 19-20, 2014 For: Major Public Auction – Area Contractors & Equipment Dealers PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Wed., December 31, 2014 For: Construction Equipment YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Kissimmee, FL February 9-16, 2015 For: 41st Annual – Heavy Construction Equipment, Trucks & Trailers

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 93

BusinessCalendar

To view our Business Calendar online, go to www.constructionequipmentguide.com.

SAVE THE DATE! AGC of Minnesota 95th Annual Meeting “Bringing It Together” Customer/Workforce/Technology When: Thursday, January 15, 2015 From 9:00 AM until 7:00 PM Where: Minneapolis Marriott Southwest 5801 Opus Parkway Minnetonka, (952) 935-0550 Contact: Denise Woods dwoods@agcmn.org Phone: 651/796-2186 NORTHERN GREEN EXPO Minneapolis Convention Center Minneapolis, MN The Northern Green Expo is going to take place from 14th – 16th January, 2015 in Minneapolis. The show takes on the social challenges related to pollution, natural resources and climatic changes need to be handled before it becomes too late. The show has been dedicated to provide the future generation a greener planet and life. The innovation done in the technologies promises to bring forth a healthier world for the future generation. The search for locating solution to environmental problems can be found here. 21st century has been given the name Century of Environment and The Northern Green Expo has been an aid towards it. For further information, please contact the Show Office at (651) 6334987 American Society of Landscape Architects: 612/339-0797 NATIONAL PAVEMENT EXPO 2015 JANUARY 28-31, 2015 Music City Center, NASHVILLE, TN Top 5 Reasons to Attend National Pavement Expo: CASE Equipment Giveaway: You could win a DV26 Vibratory Double Drum Roller. FOUR-DAY Conference: Learn from the construction industry’s best and brightest. Exhibit Hall: See the latest equipment from some of the construction industry’s biggest names, including BOMAG, CASE Construction, Elgin, Gradall, Kasi, Leeboy, Schwarze, Weiler, and many more. Roundtable discussions: Learn – for free – from contractors around the country. NASHVILLE: Enjoy Music City’s live performances, Southern hospitality and unbelievable cuisine.

Regardless of your role in the construction industry, attending National Pavement Expo will broaden your understanding of paving and pavement maintenance…with plenty of fun and camaraderie to boot. For more information on this event, contact AC Business Media, Burnsville, MN at 508/743-8514 or 877/398-6945.

Each year the industry’s top executives gather at AED Summit & CONDEX trade show – the only show in the industry dedicated strictly to equipment distribution. Whatever happens this year, one fact is unchanged: Relationships are where business begins, and AED is still the only place where manufacturers and service suppliers have a unique opportunity to establish business relationships with sucPOWER SHOW OHIO cessful construction equipment distributors. Success is all about 45th Annual Power Show Ohio partners – and CONDEX is your chance to create dialogue and build NEW DATES!!! sound business relationships. For more information, contact Thursday, January 29~~~Friday, January 30~~~Saturday, January Associated Equipment Distributors, Inc. at 630/574-0650. 31, 2015 WORLD OF CONCRETE Ohio Expo Center, Columbus, Ohio A complete power equipment industry exhibition! Dates: February 3 – 6, 2015 Las Vegas Convention Center, Las Vegas, NV What is on display? On display is new agricultural, construction, and Place: outdoor power equipment from more than 500 companies. Where is Try your hand at the year’s newest products. It’s official! World of the Power Show Ohio held? The show is held in Columbus, Ohio at Concrete 2015 will be the largest show in over six years with the Ohio Expo Center, home of the Ohio State Fair. Two buildings will 630,000+ net square feet of indoor and outdoor exhibit space and be used, the Celeste Center and the Bricker Building. Power Show over 1,300 exhibitors. Come to the World of Concrete, roll up your Ohio is sponsored by the Ohio-Michigan Equipment Dealers sleeves and try your hand at the year’s newest products, equipment Association, P. O. Box 68, Dublin, OH; and services. Technology, training, resources and ideas – zoom in phone: (614) 889-1309 at the industry’s only annual international event designed specificalemail: dalford@amglicusa.com. ly for commercial concrete and masonry professionals. WOC features innovative tools, construction machinery, construction equipCENTS MARKETPLACE EXHIBITION ment, safety training courses and training, technologies and unlimitGreater Columbus Convention Center, ed networking opportunities to give you new ways to sustain and Columbus, OHIO grow your business. World of Concrete is considered by many to be Dates: January 7 thru 9, 2015 one of the top shows in the industry. The outdoor exhibit areas, Organized by Ohio Nursery & Landscape Association including the hugely popular Artistry in Decorative Concrete, make The CENTS Marketplace exhibition is one of the significant events that World of Concrete THE ONLY event to attend in 2015! For more inforwill be taking place for a period of three days. This show is organ- mation: www.worldofconcrete.com ized with the purpose of increasing the buying and selling power of the products in the green industry. This show platform will serve as National Utility Contractors Association of Ohio (NUCA) an ideal platform for promoting the green industry products. The NUCA of OHIO exhibitors will produce a huge range of products in the exhibition to GREAT LAKES TRENCHLESS ASSOCIATION make the visitors aware of latest products and technology. The CONVENTION & TRAINING EXPO CENTS Marketplace will be an effective place for the exhibitors to Join us on Thursday, Friday & Saturday, February 19-21, 2015 increase their business opportunities and create new contacts. The Kalahari Resort in Sandusky, Ohio show will also arrange for a direct communication between exhibitors Three Tracks of Education; Specialty Certifications and Mini-Mud and the visitors. For more information on this event, please contact School! Ohio Nursery & Landscape Association at 800/825-5062 or Your registration includes: info@onla.org. . All Friday & Saturday sessions and materials, breaks and social events AED SUMMIT & CONDEX 2015 / Associated Equipment Distributors . An agenda with quality training sessions, interesting speakers DATES: FEBRUARY 10, 2015 – FEBRUARY 13, 2015 and the opportunity to interact with top industry technicians VENUE: Orlando World Center Marriott . Outstanding networking opportunities 8701 World Center Drive . Delicious breakfasts, lunches and snacks Orlando, FL (Florida) 32821 . Exposition of Trenchless products and accessories Phone: 407/239-4200 . Annual Saturday evening membership dinner with entertainment . Introduce your company, products or services to potential new dis- . Reduced Kalahari room rates that includes up to 4 daily water tributors park passes . Enhance your brand image or identity . Activities for family fun, adult fun and kid fun! . Improve your competitive position in the marketplace For more information, please contact NUCA of Ohio at 888/294. Network with your current distributors 0084. . Introduce new products or services to existing distributors AGC CONVENTION

96th Annual AGC Convention DATE: March 18-20, 2015 PLACE: San Juan, Puerto Rico Join us for the Convention!!! Business Suit Optional No one knows the future, but gaining a comprehensive view of where you are, where you are going and where you need to be can only strengthen the educated decisions construction professionals have to make every day. Take the opportunity to step outside, analyze the direction your organization is heading, listen and compare that with other construction professionals and take that perspective back to your organization. As our premier event each year, the AGC Convention and Technology & Construction Solutions Expo is the ideal opportunity to see everything AGC can do for you and your business. This year’s convention will include professional development sessions covering: . Workforce Development . Drones in Construction . Leadership . Risk Management . Quality Control . Marketing . Much More! For more information, please contact The Associated General Contractors of America. General Inquiries: 703/548-3118 AGC Store Inquiries: 800/242-1767 Convention.AGC.org AEM MEDIA SERVICES presents BAUMA CONEXPO AFRICA BAUMA CONEXPO AFRICA will be held September 15 to 18, 2015 at the Johannesburg Expo Centre in Johannesburg, South Africa. The show is owned and organized by the Association of Equipment Manufacturers (AEM) and Messe Munchen International (MMI). Exhibit space sales are now open for Bauma ConExpo Africa 2015. Companies applying for space by February 12, 2015, will be included in the first round of booth assignments. After that date, applications will be accepted on a first come, first served basis. World-class exhibition in important marketplace Exhibitors at the last show pointed out the high quality of attendees. The 2015 show venue is the country’s largest purpose-built exhibition and events facility, offering a modern space and services. And, show participants benefit from the global experience and customer service of AEM, organizer of CONEXPO-CON/AGG, and MMI, organizer of BAUMA. BAUMA CONEXPO AFRICA has broad-based support from leading industry groups in Africa and worldwide. After 2015, the show goes to a three-year cycle in response to local and international industry input. AEM is show exhibitor contact for the Americas: visit the show website: www.bcafrica.com for more details. Contact AEM at sales@aem.org or by telephone +1-414298-4150/ toll free U.S. and Canada 800-867-6060.

Page 94 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

VERY LARGE LATE MODEL CASE & CAT RENTAL RETURN AUCTION PLUS TRUCKS, TRAILERS, SUPPORT EQUIPMENT & ATTACHMENTS.

AUCTION

COLUMBUS, OHIO (Delaware County Fairgrounds) NOTE: Selling in this sale will be late model Case & Cat construction equipment very low houred that will suit anybody. HILITES: 9 CRAWLER TRACTORS: 2009 Cat D8T (winches), 2008 Cat D8T (ripper), Cat D6D (winch), 2006 Cat D6TXL, (2) 2013 JD 650KXLT (forestry pkg.), 2012 Cat D6TXL (winch, angle blade), 2007 JD 850JLT, NH DC80LGP, 12 HYDRAULIC EXCAVATORS: 2005 JD 450CLC, (2) 2012 JD 210GLC, (2) 2012 JD 210GLC, 2007 JD 200CLC, 2013 JD 160G, 2012 JD 135D, 2006 Takeuchi TB108, 2012 Cat 336E, 2010 Cat 336DLC, 2011 Cat 312DL, Demo Cat 304ECR, 2012 Komatsu PC200LC-8, 2 MOTOR GRADERS: 2012 JD 770G, JD 772BH AWD, 6 RUBBER TIRED LOADERS: (2) 2011-(2) 2008 Case 621E, Case 621EXT, 2013 JD 544K (Q.C.), 24 TRACTOR LOADER BACKHOES: (5) 2013-(5) 2012- (10) 2011-(2) 2010 Case 580 Super N (4x4, cab), 2012 Cat 420E (cab), JD 310G (4x4), 4 VIBRATORY ROLLERS: (2) New Dynapac CA2500D (cab), 2012 Bomag BW211D-40 (300hrs.), 2009 Cat CS54, 30 SKID STEERS: 2013-(19) 2012 Case SR220, (2) 2012- (5) 2011 Case SR200, 2013 Case TR270, 2013 Case TV280, Demo Cat 289D (cab), CRAWLER LOADER: 2010 Cat 963D, COMPACTORS: 2008 Cat 815F-II, 5 TELESCOPIC FORKLIFTS: 2006 Genie GTH-636C, (3) Skytrak (4x4, X - Military), JD 4500 (4x4), BOOM LIFT: JLG E300AJ, 2 ARROW/MESSAGE BOARDS: 2007 Allmand 2200-SE, JLG E300AJ, 3 AIR COMPRESSORS: (3) 2011 185CFM, AGRICULTURAL TRACTOR: Ford 8730 (4x4), BUCKET TRUCK: 2009 Ford F550XL (4x4), VACUUM TRUCK: 2003 Sterling LT9522 (tri.), DUMP TRUCK: 2007 Mack CL733 (quad), 4 WALKING FLOOR TRAILERS: 2004 Mac 48ft. (t/a), (2) 2001-1997 J&J 48ft. (t/a), 10 SNOW EQUIPMENT: (2) Master Craft Welding SP-144WL 12ft. Snow Pusher, (2) Master Craft Welding SP-120WL 10ft. Snow Pusher, Master Craft Welding SP-120SS 10ft. Snow Pusher, Master Craft Welding SP-96SS 8ft. Snow Pusher, Master Craft Welding SP-78SS 6ft. 6in. Snow Pusher, Master Craft Welding SP-72SS 6ft. Snow Pusher, TIRES: (2) New 12 PLY 12x 16.5 Skid Steer, 2 PRESSURE WASHERS: (2) New Easy Kleen, ATTACHMENTS: Skid Steers: Smooth, Snow & Mulch Buckets, 60in.- 78in. Buckets, New Versatech Grapple Buckets, New Versatech Hay Spears, New Pallet Forks, New Fork Frames, New Versatech Brush Grapples, New Stump Buckets, NEW SUPPORT EQUIPMENT: New Aluminum Diamond Plate Tool Boxes, Plate Compactors, Submersible Pumps, Concrete Vibrator, Ratchet Straps, Diamond Blades, Abrasive Blades, Jack Hammers, Pintle Hitch, Gun Kit, Air Impact Wrenches, Water Hose, Auto Darkening Welding Helmets, Air Hose Reel, Platform Scale, SUPPORT EQUIPMENT: (2) 2007 Runway Closure Marker. DIRECTIONS: From the North/South: take I-71 to Rte. 36 & US 37 Exit, proceed West on Rtes. 36 & 37 for 9 miles to Delaware. Turn right on Rte. 23 North for 1.2 miles to the sale site. Entrance on left at the Travelodge. From the East/West: Take I-70 to I-270 bypass, proceed North on I-270 to I-71 to Exit for Rtes. 36 & US 37 and proceed as noted above. NOTE: Auction Entrance is off of Rt. 23. Address: 935 U.S. 23 North Delaware, OH 43015. OHIO LICENSE #: 63199360809, OHIO AUCTIONEER LICENSE #: 62199360989

SAT., JANUARY 10 @ 9:30 AM

ALEX

LYON

& SON Sales Managers & Auctioneers, Inc. Phone: (315) 633-2944 • Fax: (315) 633-8010 Syracuse, NY (Evenings) (315) 637-8912 www.lyonauction.com

ARTBA Forecasts Modest Construction Growth for 2015 The U.S. transportation construction market will grow 3.1 percent from $185.9 billion in 2014 to $191.7 billion in 2015, according to a forecast released Dec. 3 by American Road & Transportation Builders Association (ARTBA) Chief Economist Alison Premo Black. This is slightly above anticipated growth in the overall economy — U.S. Gross Domestic Product is expected to grow between 2.6 and three percent, according to the U.S. Federal Reserve. The ARTBA forecast for the largest segment of this market — highway, street and related work — is tempered by two key factors: uncertainty over long-term federal funding, which represents 52 percent of state department of transportation (DOT) capital outlays; and still recovering state and local budgets. Outside of construction, state and local governments are expected to spend an additional $38.5 billion for maintenance work; $13.2 billion for in-house and consultant planning and design services; and $7 billion for right-of-way purchases as part of their highway and bridge programs. By infrastructure mode, forecast highlights in Dr. Black’s report include: Highways, Private Driveways & Parking Lot Construction/Pavement The construction market for highways, streets and related work, private driveways and commercial parking lots will grow to $64.9 billion, up 2.1 percent from $63.5 billion in 2014. • This includes 1.2 percent growth in highway, street and related work, from $51.8 billion in 2014 to $52.4 billion in 2015. To put this market in perspective, the amount of work completed in 2009 was $67.3 billion. • The market is expected to be uneven across the country, with highway investment up in 24 states, down in 19 states and Washington, D.C., and within a plus/minus five percent in seven states. • Approval of more than $17 billion for transportation investment through legislative and ballot measures in 2014 will help support the market in the coming years. State legislatures approved 14 measures in 2014 to increase investment, while voters approved 79 percent of the ballot measures. • The public private partnerships (P3s) market also will support new growth in 2015, with four states awarding their first P3 projects (Colorado, North Carolina, Ohio and Pennsylvania) earlier this year. • Contractors will have an additional $30 to $40 billion in business opportunities from private highway and bridge work that is completed as part of housing developments and larger commercial structures, separate from parking lots and driveways Bridges & Tunnels Record growth is expected to continue in the

bridge and tunnel construction market, increasing from $30.8 billion in 2014 to $31.3 billion in 2015. • The national market is being driven by activity in 10 states, which account for more than 57 percent of the market: New York, California, Texas, Pennsylvania, New Jersey, Washington, Illinois, Ohio, Massachusetts and Virginia. • Bridge construction has grown from 19.6 percent of all highway and bridge work in 2000 to 37.3 percent in 2014. ARTBA said that the share of bridge work will continue growing in the next five years. Light Rail, Subways & Railroads ARTBA is forecasting that light rail, subway and railroad construction will increase from $18.3 billion in 2014 to $20.9 billion in 2015. • Subway and light rail work will increase from $7.1 billion to $8.3 billion. • Heavy rail investment, largely by Class 1 freight railroads, will increase from $11.2 billion in 2014 to $12.6 billion in 2015. • The increase in demand for freight transportation and multimodal connections will help spur investment in heavy railroads. This is, in part, being driven by the expansion of the Panama Canal and increased shipments of energy-related goods. • Based on recent contract awards, states with upcoming projects include: California, Colorado, Florida, Illinois, New York and Washington. Airport Runways & Terminals The total value of airport runway and terminal construction will grow from $12.5 billion in 2014 to $13.1 billion in 2015, according to ARTBA. • Growth in the U.S. economy, enplanements and air freight traffic will support increased investment in this sector over the next five years. • States with significant market activity include California, Colorado, Florida, Georgia, Illinois, New York, Texas and Virginia. Ports & Waterways The ports and waterway construction market will increase slightly to $2.8 billion in 2015, up from $2.7 billion in 2014. • Continued investments from ports on the East and West Coasts, in anticipation of the expansion of the Panama Canal in 2015, will help spur continued investment. • Some states with increased investment in recent years include: California, Florida, Louisiana, Mississippi, New Jersey, Texas, Virginia and Washington. The ARTBA forecast is based on a proprietary econometric model and analysis of federal, state and local data and market intelligence. It can be purchased in “Economics & Research” section of www.artba.org/shop. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 95

Page 96 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Zielger CAT Hosts Another Successful Minneapolis Auction

n Dec. 19, Ziegler CAT hosted a sale at its facility in Minneapolis, Minn.

Available for bidding were articulated trucks, backhoe loaders, compact track and multi-terrain loaders, compactors, excavators, skid steer loaders, telehandlers, dozers, wheel loaders and more. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) see CAT page 100

Doug Rockstead, Gerit Hanson Inc., Black Duck, Minn., picked up this nice Cat wheel loader, which he plans on putting to work right away.

Giving this Bobcat S175 a look over is Ken Dahl of SMC out of Mankato, Minn.

Ben Powers (L) and Skip Lessard, both of Outdoor Design in Hugo, Minn., are looking for any kind of deal on equipment they can get their hands on.

Gabe Peterson, head auctioneer of the event, calls out the bids.

Brent Nicklay (L), regional sales manager of Cat Auction Services and Mitch Yeager of Ziegler CAT, Des Moines, Iowa, agree: good weather and great people make a great auction.

On Dec. 10, Ziegler CAT hosted a sale at its Minneapolis, Minn., location.

Mike Munroe (L) of Valley Transportation, Rochester, Minn., takes care of all the attendees shipping needs along with Ziegler CAT Used Equipment Manager Charlie Baer, Shakopee, Minn., branch.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 97

Western

JANUARY JANU AR RY 27–29 27–

WINTER SALE DON’T WAIT TO BUY YOUR EQUIPMENT P ?); Z .=)3< +5; <$1) P .( 541.4) W 5 =;$?)1 4))()( P 54<=;>'=.54 ):>.83)4=Z ';$4)<Z 3.4.4,Z =;>'0<Z =;$.1);< # 35;)_ ® P ;54 1$( ´<<>;$4') 54 )?);B .=)3

P 4=.;) .4?)4=5;B $= @@@Y.;5481$4)=Y'53

The best way to buy and sell used equipment. P Period. eriod. w w w.ironpl anet .c om | 8 8 8.4 3 3.5 426

Page 98 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

More Than 2,850 Attend Ritchie Bros. Chicago Auction

There was quite the lineup of Cat wheel loaders at the Dec. 12 auction.

ore than 2,850 bidders participated online and in person at Ritchie Bros. Auctioneers’s multi-million dollar unreserved public equipment auction in Chicago, Ill., on Dec. 12. Tim Isley of Rochelle Highway Department takes some notes on the Bidders came from more than 50 countries, wheel loaders. including 48 U.S. states. Approximately 66 percent of the equipment was sold to out-of-state buyers, from as far away as India, Belize, Egypt, Saudi (L-R): Roger Martinez, Ritchie Bros., answers Arabia and Singapore. Online bidders purchased some questions from Chuck Polito and Ryan 43 percent of the equipment sold (by dollar value). Vandermast, both of Copenhaver Construction. The auction featured nearly 1,550 equipment items, including more than 50 pickup trucks and 70 truck tractors, as well as a large selection of scissorlifts, 4WD tractors, wheel loaders, hydraulic excavators and more. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) see RITCHIE page 99

Testing out this Cat 330D is John Hagan, Landview Excavating. Bill Farmer, Construction Equipment Sales Co., looks over the Cat wheel loaders.

Kyle Oeffling of LC Transport runs this Komatsu PC300 LC.

Jeff Barth (L) and Marc Duffy, both of B&B Ag Products, get ready to start up some of the many Cat wheel loaders.

Checking the engine of this Komatsu PC400 LC is Andrew Lehenbauer of Lehenbauer farms.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 99

Bidders Vie for Nearly 1,550 Pieces of Equipment During Ritchie Auction RITCHIE from page 98

I.R.A.Y. Companies is pleased to offer professional appraisal services. Our Certified Appraisal Services are laddered and can be customized to suit your individual needs. • Formal Appraisal: We fully inspect the equipment and provide a certified, professionally prepared document including pictures, serial numbers, and descriptions. The following non-certified options give you a market price at a valued rate. • Fax or E-mail Appraisal: You submit details of the equipment and we fax or e-mail you an appraisal report. • Desktop Appraisal: This appraisal is based on our phone conversation. No written appraisal is provided, only a value! Desktop appraisals start as low as $25 per unit! Call today for a free appraisal quote!

877-968-7230 www.iraymn.com

Mike Miesiac (L) and Jack Niedzwickie check over this Doosan DX 225 LC excavator.

Brian Roe of Roe Trucking came to see if he could take this Cat 272D skid steer home.

Page 100 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Transportation Investment Positively Impacts Many Sectors IHS from page 1

economy. Among the sectors that benefit the most are service industries such as business, education, health and leisure, and hospitality. The study also finds that 62 percent of the jobs created from federal highway and mass transit investments are outside the construction industry. Over one-third of all jobs created also are in service industries like business, education, health and leisure, and hospitality. “The study shows that investment in transportation infrastructure has a positive impact on every major sector of the U.S. economy. These far reaching economic benefits contribute to economic growth by improving the nation’s capital stock, which enables increased economic activity,” said Karen Campbell, a senior consultant at IHS, who produced the report with Bob Brodesky, a transportation expert and senior manager in the IHS Industry Consulting Group. Current federal highway and public transit investment, which is

“The study shows that investment in transportation infrastructure has a positive impact on every major sector of the U.S. economy. These far reaching economic benefits contribute to economic growth by improving the nation’s capital stock, which enables increased economic activity.” Karen Campbell IHS

about $50 billion annually, generates an average $31 billion in personal income tax receipts per year and $6 billion in federal corporate tax receipts per year due to increased economic activity, according to the analysis. This amounts to 74 cents returned on every dollar invested. IHS noted that current levels of federal investment on highway and public transit spending contribute nearly one percent to the U.S Gross Domestic Product (GDP), the measure of goods and services produced by the economy. Among the other economic benefits: • Every $1 in federal highway

and mass transit investment increases the nation’s GDP between $1.80 to $2.00 • Current federal transportation spending contributes on average $410 to real income per household each year. IHS also studied the resulting impacts from five percent annual increases in federal highway and transit investment from 20142019, and found the added investment would create: • Between 78,000 and 122,000 new jobs by 2019 (includes direct, indirect, and induced jobs); • An annual average increase of $40 in real household income each

year; • An additional $9.6 billion in real GDP for the U.S. economy by 2019; and • On average an additional $4.9 billion per year in federal, state and local government revenue. “Federal transportation spending expands the capital stock of the U.S. economy, drives the production and delivery of goods and services, and positively affects business and household incomes,” the study’s authors write. “It also enhances the transportation system’s operational capacity by reducing travel times and costs. This results in greater accessibility

for individuals, households and businesses, more efficient delivery of goods and services, improved lifestyles, and standards of living, and safer roadways.” The members of the Transportation Construction Coalition (TCC), which commissioned the study, said they would send it to all congressional offices to help them better understand the urgency for a permanent solution for the Highway Trust Fund well before May 2015, when funding for the highway and transit program will once again be in jeopardy for the sixth time since 2008. The TCC is issuing this report ahead of the upcoming congressional recess, when many coalition members will be meeting with their elected officials at home. For more information, visit www.transportationconstructioncoalition.org. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Ziegler CAT Attracts Bidders ARTBA Foundation Launches With Myriad of Equipment New Awards Competition The American Road & Transportation Builders Association Transportation Development Foundation (ARTBA-TDF) is launching a new awards competition to recognize transportation design, construction and safety industry firms that have initiated programs — outside the scope of normal business operations — aimed at improving the quality of life in the communities where they are based. The “Helping Hand Awards” will share the industry’s “good works” stories with the public, news media, legislators and other opinion leaders. By publicizing these An aerial shot of Ziegler CAT’s Minneapolis, Minn., facility. efforts, the Foundation hopes to inspire others in the industry to follow — or exceed — their example. These main criteria will be used to evaluate the entries: • Nominees will have developed or engaged in programs or initiatives that benefit residents in communities where they are headquartered or conduct business. Such activities could include, but are not limited to, mentoring school children, helping the disabled, providing food or clothes Mike Morley of JMJ Incorporated, Forest Lake, Minn., bought a tractor and trailer for the homeless, cleaning up litter, or providing other services to disadvantaged combo. CAT from page 96

neighborhoods. • Nominees should have made a significant contribution of personal time, along with contributions of money, materials, or other in-kind services/resources. Nominees will be judged on the overall level of impact their contribution has had on the community. • A major portion of the nominee’s community relations program must have taken place in the previous 18 months, but judges also will consider ongoing efforts outside this timeframe that illustrate the depth of commitment. There is no fee to enter and nominations should be submitted online: www.artbatdf.org by Feb. 6, 2015. Contact ARTBA’s Awards & Scholarship Program Manager Kashae Williams at kwilliams@artba.org with questions. Winners will be honored at a special lunch held during the 2015 ARTBA Federal Issues Program April 13 to 15 in the Nation’s Capitol. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 101

THE NAMES YOU’VE GROWN TO TRUST.

February 11-13

Holding a Joint Florida Sale That’s right, this year, Cat Auction Services and IronPlanet will jointly hold a three-day auction delivering the best prices of the season! This event will be a live, onsite unreserved auction in Orlando with IronPlanet’s 1.2 million global users invited to join online as well.

Consign today! We’ll sell it onsite or online from your yard.

WHY WE ARE YOUR BEST CHOICE • We We offer the best auction experience in Florida – for both buyers and sellers • Global marketing exposure for your equipment iron • Top Top quality iro • Unequalled offering of late model, low hour machinery • Our Leaderboard technology

• Not just Cat – we offer all makes & models • Financing options onsite • Equipment is inspected and videotaped • Equipment Protection Plans (EPP) • Cat Product Link - Free on qualifying machines • The best site layout and buying environment in Florida!

• Onsite & online bidding platforms

Your Y our Best Best Cho Choice. oice.

W WHEN BUYING O OR SELLING S LLING AN NY MAKE, MODEL, SIZE COLOR CO R OR O CONDITION ONDITION ANY

in www www.catauctions.com .catauctions.com CAT CA AT AUCTION A SERVICES 866.779.2361 info@catauctions.com

Page 102 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com A E D ..................................................................................................38 ABLE MANUFACTURING LLC ..........................................................80 AIM ATTACHMENTS ..........................................................................37 ALEX LYON & SON INC COLUMBUS OH ........................................................................94 ALEX PARIS CONTRACTING CO INC ................................................9 ALTORFER CAT ..................................................................................42 AMERICAN STATE EQUIPMENT ......................................................37 ANACONDA USA ................................................................................28 ARING EQUIPMENT CO INC ............................................................15 ASC CONSTRUCTION EQUIP USA..............................................10,11 ASPEN EQUIPMENT ..........................................................................71 ATI CORPORATION/LEVEL BEST ....................................................37 ATLAS COPCO ..................................................................................45 BAIR PRODUCTS INC........................................................................41 BARGAINS ....................................................................................89,90 BLANCHARD MACHINERY INC ........................................................42 BOBCAT CO ..................................................................................52,53 BOMAG AMERICA'S INC....................................................................81 CASE ..................................................................................................47 CAT AUCTIONS ORLANDO FL ..........................................................................101 CEG SCALE MODELS........................................................................44 CK POWER ........................................................................................41 CLASSIFIEDS ....................................................................................88 COMPANY WRENCH..........................................................................21 CONSTRUCTION EQUIPMENT GUIDE AUCTION PROFILE PROMO ....................................................36 FLORIDA AUCTION PROMO ....................................................95 WANTED ....................................................................................91 CHRISTMAS CARD ..................................................................33 CUSTOM MADE PRODUCTS ............................................................24 DOMINION EQUIPMENT PARTS ......................................................24 E TIP INC ............................................................................................27 EFFICIENCY PRODUCTIONS............................................................32 ERB EQUIPMENT ................................................................................7 FABCO EQUIPMENT INC ....................................................................2 FAE USA INC ......................................................................................80 FINKBINER EQUIPMENT CO ............................................................27 FLANGE LOCK ..................................................................................45 FOLEY EQUIPMENT CO ....................................................................23 FURY MOTORS ..................................................................................29 GEHL ..................................................................................................50 GENSCO EQUIPMENT CO LTD ........................................................32 GOMACO CORP ................................................................................84 HINIKER NORTHEAST ......................................................................72 HITACHI MFG ................................................................................76,77 HOWELL TRACTOR & EQUIPMENT CO ........................................104 HYUNDAI ............................................................................................17

HYUNDAI CONSTRUCTION EQUIPMENT ........................................73 ILLINOIS TRUCK & EQUIPMENT ........................................................3 IRAY AUCTION....................................................................................99 IRONPLANET......................................................................................97 JCB INC..........................................................................................54,55 JFW EQUIPMENT INC........................................................................86 JOB RENTALS AND SALES LLC ......................................................27 JOHN DEERE ....................................................................................57 JOHN DEERE SKID STEER ..............................................................63 KAWASAKI ..........................................................................................51 KOBELCO CONST MACHINERY ......................................................31 KOMATSU AMERICA CORP..........................................................74,75 KUBOTA ..............................................................................................56 KUBOTA SVL ......................................................................................67 LANO EQUIPMENT INC ....................................................................43 LBX ....................................................................................................65 LEEBOY ........................................................................................82,83 LIEBHERR CONSTRUCTION EQUIPMENT ......................................39 MATEJCEK IMPLEMENT....................................................................18 MCCANN INDUSTRIES INC ................................................................6 MID COUNTRY MACHINERY ............................................................35 MIDWEST READY MIX & EQUIPMENT ............................................13 MUSTANG MFG ..................................................................................69 NATIONAL ATTACHMENTS................................................................30 NPK CONSTRUCTION EQUIPMENT INC..........................................22 NTS TIRE SUPPLY ............................................................................30 NUSS GROUP ....................................................................................14 OHIO-MICHIGAN EQPT DEALERS....................................................32 OKADA AMERICA ..............................................................................30 PRO-TEC EQUIPMENT ......................................................................24 PURPLE WAVE INC............................................................................93 ROAD BUILDERS MACHINERY......................................................6,19 ROLAND MACHINERY INC ..................................................................5 ROSCO MFG CO ................................................................................87 SMITHCO ............................................................................................34 SOUTHEASTERN EQUIPMENT CO ..................................................38 STAR EQUIPMENT LTD ......................................................................6 TAKEUCHI......................................................................................60,61 TITAN RENTS ....................................................................................34 TRI-STATE BOBCAT ..........................................................................25 VOLVO COMPACTION ......................................................................86 VOLVO CONSTRUCTION EQUIPMENT ..........................................103 WACKER NEUSON CORP ................................................................49 WEST SIDE TRACTOR SALES ..........................................................41 WIRTGEN AMERICA ..........................................................................85 YANMAR AMERICA ............................................................................59 YODER & FREY AUCTIONEERS KISSIMMEE FL AUCTION..........................................................99

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 20, 2014 • Page 103

Contact your local dealer:

Battle Creek, MI 269.965.1269 Byron Center, MI 616.878.7450 Kentwood, MI 616.698.2960 Lansing, MI 517.272.5033 Muskegon, MI 231.798.8754 New Hudson, MI 248.356.5200 Romulus, MI 734.641.8238 Saginaw, MI 989.752.9400 Sterling Hts, MI 586.977.6000 Traverse, MI 231.943.3700 Wixom, MI 248.449.6700 Wixom, MI (Cons. Division) 248.356.5200 Zeeland, MI 616.748.4108

Bismarck, ND Buford, GA 701.250.4882 678.318.9500 Fargo, Forest ND Park, GA 701.271.2360 770.319.0074 Minot, ND GA Savannah, 701.250.4882 912.964.8079 Williston, Asheville,ND NC 701.570.5309 828.687.0620 Buford, GA Charlotte, NC 678.318.9500 704.596.8283 Forest Park, GA Greenville, NC 770.319.0074 252.754.5280 Savannah, GA Raleigh, NC 912.964.8079 919.661.8710 Asheville, NC Bismarck, ND 828.687.0620 701.250.4882 Charlotte, NC Fargo, ND 704.596.8283 701.271.2360 Greenville, NC Minot, ND 252.754.5280 701.250.4882 Raleigh, NC Charleston, SC 919.661.8710 843.414.1120 Charleston, SC Columbia, SC 843.414.1120 803.791.0740 Columbia, SC Piedmont, SC 803.791.0740 864.704.1060 Piedmont, SC Chattanooga, TN 864.704.1060 423.308.7940 Chattanooga, TN 423.308.7940 Knoxville, TN 865.525.1845 Knoxville, TN 865.525.1845

McALLISTER EQUIPMENT CO.

Alsip, IL 708.389.7700 East Peoria, IL 309.694.4455 Rockford, IL 815.227.0555 Springfield, IL 217.789.0351 Villa Park, IL 630.530.7600

Evansville, IN 812.867.6661 Fort Wayne, IN 260.482.3681 Indianapolis, IN 317.247.9125 Corbin, KY 606.528.9440 Louisville, KY 502.456.4050 Prestonsburg, KY 606.874.2104 St. Louis, MO 314.487.8925

YOU CHOSE GUARANTEED* FUEL EFFICIENCY WITH EXCEPTIONAL DEALER SUPPORT.

Smart Works. * Ask about our Fuel Efficiency Guarantee by contacting a Volvo dealer near you, or visit volvoce.com/NAFuel to learn more.

Volvo Construction Equipment

Page 104 • December 20, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE