Published Nationally Northeast Edition
®
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
Inside
www.constructionequipmentguide.com
April 19, 2017 • Vol. LV • No. 8 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910
Panel Chooses Team for $1.5B Javits Project
state funds, and the construction cost of $100 million, which will come from Maryland and West Virginia DOT funds. SHA’s contractor for the project is Triton Construction, Inc. of St. Albans, W.Va. The contract calls for widening the road from four to six lanes, including the I-81 bridges over the Potomac River. Work began in the fall of 2016, and
Howard Zemsky, Empire State Development president, CEO and commissioner announced the selection of the design-build team for the $1.5 billion expansion of the Jacob K. Javits Convention Center. Following a rigorous evaluation process utilizing five groups of technical experts, a blue-ribbon selection panel has chosen LendLease Turner as the design-build team that will coordinate and construct the massive project on Manhattan’s West Side. The panel’s recommendation was approved by the Board of Directors of the New York Convention Center Development Corporation, a subsidiary of Empire State Development that owns the convention center’s property and oversees major construction work at the facility. The project is expected to generate $393 million in new annual economic activity, reduce area traffic congestion and increase the efficiency of Javits Center operations to allow for new and expanded events.
see PLAN page 100
see JAVITS page 106
Philadelphia Museum of Art Renovation Under Way...8
Maryland State Highway Administration photo
According to the SHA, the average daily traffic volume in 2016 was 64,000, 28 percent of which was truck traffic.
Manitowoc, Stephenson Celebrate New Crane...14
Maryland SHA, W.Va. DOT Project Widens Interstate 81 By Brenda Ruggiero
The Maryland State Highway Administration is in the early stages of widening I-81 (Maryland Veterans Memorial Highway) and rehabilitating several bridges in the Williamsport area of Washington County. The project is Phase I of a four-phase project. The cost of the project is $105.5 million. The design cost is $5 million, which will come from CEG CORRESPONDENT
Alex Lyon & Son Holds Sale in Atlantic City...138
Table of Contents................ 4 Paving Section.............. 55-71 Skid Steers, Compact Track Loaders & Attachments Section.......................... 75-97 Parts Section....................128 Auction Section...... 132-141 Business Calendar.......... 141 Advertisers Index............ 142
Reagan Nat’l Launches $1B ‘Project Journey’ The Metropolitan Washington Airports Authority, at its board of directors meeting March 22, kicked off Project Journey, a comprehensive campaign surrounding the planned $1 billion, multi-year capital improvement project that will transform the passenger experience at Reagan National Airport. Scheduled to mobilize in summer 2017, Project Journey includes construction of two new security checkpoints that fully connect the concourse level of Terminal B/C to airline gate areas, buildout of an enclosed commuter concourse to replace the 14 outdoor gates currently serviced by buses from gate 35X and future improvements to roadway Reagan National’s new commuter concourse will have 14 gates consee JOURNEY page 102
nected to regional aircraft.
Page 2 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
2014 CAT 316EL
2014 CAT 246D
2015 CAT 236D
2014 CAT D6TXL
977 Hours
592 Hours
658 Hours
1339 Hours
$124,999
$34,499
$34,499
$239,999
ID# CR30736, Cab, AC, Hammer Lines, Tool Control, Hydraulic Coupler, GP Bucket
ID# CR30621, Cab, AC, High Flow, 2 Speed, Electric Coupler, GP Bucket
ID# CR30722, Cab, AC, High Flow, 2 Speed, GP Bucket
ID# HR3418, Cab, AC, ARO, Ripper Hydraulics, Semi-U Blade
2013 CAT 318E
(3) 2006 CAT 430EIT
2013 CAT 279D
2014 CAT 259D
1779 Hours
7,000-7,800 Hours
566 Hours
977 Hours
$127,500
Starting at $37,500
$52,000
$43,500
ID# CR30534, Cab, AC, HP & MP Lines, Hydraulic Coupler, GP Bucket
Cab, AC, 4WD, E-Stick, Hammer Lines, Front Bucket & Forks, Rear Ditching Bucket & GP Bucket
ID# CR30895, Cab, AC, High Flow, 2 Speed, Ride Control, Electric Coupler, GP Bucket
ID# CR30756, Cab, AC, High Flow, 2 Speed, Ride Control, Electric Coupler, GP Bucket
2012 CAT 815FII
2013 CAT D6K2LGP
2014 CAT 257D
2013 CAT 336ELH
2,852 Hours
4112 Hours
1,259 Hours
2,494 Hours
$349,000
$119,000
$42,500
$205,000
ID# UP20648, Cab, AC, Dirt Arrangement, Straight Blade, Jobsite Ready
ID# CR31101Z, Cab, AC, Ripper Hydraulics, ARO, PAT Blade
ID# UP20684, CAB, AC, 2 Speed Travel, Electric Coupler, GP Bucket, Brand New Tracks
ID# HR3363, Cab, AC, Hammer Lines, Hydraulic Coupler, GP Bucket
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 3
YOUR NEEDS. UNE N ARTHED. Building your con nstruction business togeth her. Our G-Series Compact Excavators E may be VPDOO EXW WKH\ŤUH IXOO RI ELJ LGHDV IURP FRQWUUDFWRUV DQG Æ HHW PDQDJHUV OLNH \RX )RU H[DPSOH D ZLGHU HQWU\ZD\\ ,PSURYHG YLVLELOLW\ $ WKLUG VHUYLFH GRRU IRU HDVLHU PDLQWHQDQFH DQG FRROHU FOHDQLQJ $QG D GHSHQGDEOH QR IXVV )LQDO 7LLHU HQJLQH <R <RX DVNHG IRU PDFKLQHV WKDW DUH RSHUDWRU IULHQGO\ S \ GHSHQGDEOH S DQG HDV\\ WR PDLQWDLQ P :H PDGH VXUH WKHH * 6HULHV GHOLYHUV 6HH IRU \RXUVHOI DW \RXU GHDOHU RU DW -RKQ'HHHUH FRP H[FDYDWRUV Featured Equipment (more available on www.jesco.us)
2015 JOHN DEERE 318E, STK# 403233, 69 HRS, JOYSTICK, CAB, 2 SPEED TRANS, AC, STD HYDRAULICS
2014 JOHN DEERE 320E, STK# 400739, 308 HRS, JOYSTICK, 2 SPEED TRANS, CAB, AC, STD HYDRAULICS, REMAINDER OF 3YR/2000 HR PTH
2015 JOHN DEERE 320E, STK# 402091, 161 HRS, JOYSTICK, CAB, 2 SPEED TRANS, AC, STD HYDRAULICS, SELF LEVEL, REMAINDER OF 3YR/2000 HR PTH
2015 JOHN DEERE 326E, STK# 403716, 55 HRS, JOYSTICK, TWO SPEED TRANS, STD HYD, CAB, AIR, REMAINDER OF 3YR/2000 PTH WARRANTY
2015 JOHN DEERE 328E, STK# 403356, 68 HRS, JOYSTICK, SINGLE SPEED TRANS, STD HYD, CAB, AC, MECH SEAT, REMAINDER OF 3YR/2000 HR PTH WARRANTY
2015 JOHN DEERE 328E, STK# 403443, 317 HRS, JOYSTICK, TWO SPEED TRANS, RIDE CONTROL, STD HYD, MANUAL QUICK-TACH, CAB, AC
2015 JOHN DEERE 328E, JOYSTICK, TWO SPEED TRANS, HI-FLOW, CAB, AC, REMAINDER OF 3YR/2000HR PTH WARRANTY
JESCO offers a large fleet of well maintained used equipment to special leasing deals that could be more cost-effective than renting. Powertrain and hydraulic warranties available on certain equipment when purchased. Contact your local sales rep for more information on ways that JESCO can save you money on used equipment.
www.jesco.us (800) 241-7070
Branch Locations: South Plainfield, NJ â&#x20AC;¢ Fairfield, NJ â&#x20AC;¢ Lumberton, NJ â&#x20AC;¢ Beacon, NY â&#x20AC;¢ Deer Park, NY â&#x20AC;¢ Middletown, DE Baltimore, MD â&#x20AC;¢ Frederick, MD â&#x20AC;¢ Delmar, MD â&#x20AC;¢ White Plains, MD â&#x20AC;¢ Shrewsbury, MA
Page 4 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
®
IN THIS ISSUE
NORTHEAST EDITION Circulated Throughout • New Hampshire • Vermont • Connecticut • Rhode Island • New York • New Jersey • Delaware • Maine • Pennsylvania • Maryland/D.C. • Virginia • West Virginia • Massachusetts
To read these stories and many more, visit www.constructionequipmentguide.com
14
FEATURES 8
138
PHILADELPHIA MUSEUM BREAKS GROUND ON $525M RENOVATION
The Philadelphia Museum of Art begins a new phase of transformation and renewal, supported by a $525 million campaign.
14 MANITOWOC, STEPHENSON CELEBRATE NEW NTC55 TRUCK CRANE
8 final renderings and floor plans for the modernized Martin Luther King Jr. Memorial Library.
Manitowoc Cranes celebrated the release and first five retail orders of the new National Crane NTC55 truck crane at a special ceremony at ConExpo 2017.
46 A LOOK BACK: CONSTRUCTION OF IRVIN
22 BARLETTA WINS AED LEADERSHIP AWARD
The new $45 million Irvin Works of the Carnegie-Illinois Steel Corporation in Clairton, Pa., near Pittsburgh was America’s largest industrial project in 1937.
Associated Equipment Distributors (AED) presented Congressman Lou Barletta (R-Pa.) with its 2017 Legislative Leadership Award during a luncheon on Capitol Hill held in conjunction with the AED/Equipment Dealers Association 2017 Washington Fly-In.
48 HYUNDAI CE AMERICAS ADDS
22 KOMATSU EXPANDS MINING BUSINESS, ACQUIRES JOY GLOBAL Komatsu America Corp., has completed its acquisition of Joy Global Inc., a worldwide leader in high-productivity mining solutions.
FOX-MARRS PRESIDENT, CEO JCB has announced the appointment of Richard Fox-Marrs as president and CEO of JCB Inc., responsible for JCB operations in North America, including sales and support for the construction, agricultural, rental, government and defense industries.
88 WACKER NEUSON INTRODUCES LINE OF SKID
WORKS IN CLAIRTON, PA.
YORK GARNET MINE Just a few hours’ drive north of New York City, the Adirondack Mountains offer a tranquil respite for those looking to escape the hustle and bustle of the Big Apple.
ON KUBOTA SSV MODELS
ERIC CLIFF AS SERVICE MANAGER Hyundai Construction Equipment Americas Inc. announced the addition of Eric Cliff as northeast district service manager.
KOLAKOWSKI AS CHIEF FINANCIAL OFFICER
138 ALEX LYON & SON HOLDS THREE-DAY SALE IN ATLANTIC CITY The late-model rental equipment auction featured items from Herc Rentals, Neff Rentals, Sunbelt Rentals and Ahern Rentals.
SKID STEERS, CTLS
CLOSES FOR $208M RENOVATION
www.constructionequipmentguide.com Editorial e-mail editorial@cegltd.com Advertising e-mail production@cegltd.com
92 CASE INTRODUCES SV340 SKID STEER
DEPARTMENTS 130 CLASSIFIEDS 132 COMING AUCTIONS 141 BUSINESS CALENDAR
EQUIPMENT
84 LARGE-FRAME SKID STEERS, CTLS MAKE BIG PROJECTS SEEM SMALLER
55 60 66 66
VÖGELE MT 3000-2i Offset PowerFeeder WACKER NEUSON 3001 Concrete Edition CASE SV208 Single Drum Soil Compactor BOMAG BVP 10/30 Vibratory Plate
For advertising rates Contact
Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910
MORE POWER, ENHANCED CAPACITY
80 ASV OFFERS POSI-TRACK RT-30 COMPACT TRACK LOADER
On March 4, Richard Reyes-Gavilan, DC Public Library executive director, announced that the Martin Luther King Jr. Memorial Library, D.C.’s central library, will close for a complete modernization. Reyes-Gavilan also released
Mobile
90 JCB LAUNCHES SKID STEERS OFFERING
50 FOLEY INCORPORATED INTRODUCES JIM
32 MLK JR. MEMORIAL LIBRARY
Web site
STEERS, CTLS
88 SLIDE-UP, FRONT-ENTRY DOOR STANDARD
30 SITE SIM PROVES A LITTLE GEM FOR NEW
Edwin M. McKeon Sr. Edwin M. McKeon Jr. Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz Teddy McKeon
SKID STEER
Susan Connolly, executive vice president & COO of Foley Incorporated announced that Jim Kolakowski has joined the company as chief financial officer, reporting directly to her.
28 JCB NORTH AMERICA NAMES
Founder, Publisher & CEO Northeast Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Director of Web Services.
86 NEW HOLLAND INTRODUCES L234
YouTube
Edwin M. McKeon Jr.
Kent Hogeboom
Ed Bryden
Bob Buckley
• New Jersey • Eastern Pennsylvania • Northern Maryland • Delaware
• New York • New England • Northern Pennsylvania
• West Virginia • Western Pennsylvania
• National • Central Pennsylvania
Toll Free Fax e-mail
215/885-2900 800/523-2200 215/885-2910 tmckeon@cegltd.com
Toll Free Fax e-mail
315/866-1423 800/988-1203 315/866-1379 khogeboom@cegltd.com
Toll Free Fax e-mail
440/268-9690 800/810-7640 440/268-9691 ebryden@cegltd.com
Construction Equipment Guide Northeast Edition (ISSN 1058-787X) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Northeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
Contents Copyrighted ©2017, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from
Toll Free Fax e-mail
518/863-4100 800/992-7116 518/863-7100 bbuckley@cegltd.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 5
Page 6 â&#x20AC;˘ April 19, 2017 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE
YOUR INPUT. CARRIED THROUGH. Building your con nstruction business togeth her. Contractors like you askked for a simple compact loader that can maneuver in small spaces, s is easy to operate, aand can still handle big jobs. Meet the 20 04K and 304K Loaders from m John Deere. Theyâ&#x20AC;&#x2122;re just u under eight feet tall and just over six feet w wide, so you can do loadingg work on tight jobsites andd inside buildings with FRQĆ&#x;GHQFH 7KDQ QNV WR LQWHOOLJHQWO\ SODFHG FR RQWUROV RSHUDWLRQ LV VHFRQGG QDWXUH 7KHVH ORDGHUV are â&#x20AC;&#x153;easyy in, easyy outâ&#x20AC;? as well, with open p opperator stations standard. TTo o learn l more, see yyour dealer or visit JohnDeere.com/loaders.
www.plasterer.com
We Rent Integrated Grade Control Technology Including Laser, Sonic Tracking and GPS Plasterer has machines with Topcon and Trimble 2D Laser and 3D GPS systems in stock and ready to go
We offer flexible rental purchase terms
PLASTERER EQUIPMENT CO., INC. Serving Contractors, Municipalities, and Industry since 1912 LEBANON, PA
SELLERSVILLE, PA
BETHLEHEM, PA
LEWISBERRY, PA
2550 E. Cumberland St. (717) 273-2616 â&#x20AC;˘ (800) 225-4001
3215 State Rd. (215) 258-5700 â&#x20AC;˘ (800) 523-2209
400 Stoke Park Rd. (610) 867-4657 â&#x20AC;˘ (800) 587-9790
640 Lowther Rd. (717) 938-6568 â&#x20AC;˘ (866) 787-0001
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 7
631/643-2605 www.allislandequipment.com
Serving Nassau, Suffolk and the Five Boroughs since 1970
0
%
Financing for 36 Months During the Month of April
P omisees Kept Pro
KCMA A Corporation | 770.499.7000 | KCMCORP.CO OM 2 40 Barrett Park Drive, Suite 1101 | Kennesaw, GA 30144 21
®
Lowboy
Page 8 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Philadelphia Museum Breaks Ground on $525M Renovation The Philadelphia Museum of Art begins a new phase of transformation and renewal, supported by a $525 million campaign. A key part of this campaign, the Core Project will create a significant amount of new public space within the footprint of the landmark building and add 23,000 sq. ft. (2,137 sq m) of new gallery space for the display of the collection. The Philadelphia Museum of Art has officially begun the Core Project, a physical transformation and renovation of its main building led by visionary architect Frank Gehry. As the next phase in the implementation of the Museum’s Facilities Master Plan, the Core Project will add 67,000 sq. ft. (6,225 sq m) of new public space, an additional 11,500 sq. ft. (1,068 sq m) for the display of the Museum’s rich holdings of American art, and an equal amount of gallery space for the presentation of contemporary art. Combining much-needed infrastructure improvements with a reorganization of circulation at the heart of the building, the Core Project will greatly improve the experience of the Museum for its visitors, dramatically enhance access for the community, and provide more room for the display of its renowned collection. The Museum will remain open to the public and fully operational throughout the construction period, which will be completed in approximately three years. Budgeted at $196 million, the Core Project is part of a larger fundraising effort — It Starts Here: Campaign for the Philadelphia Museum of Art — that will enable the Museum to achieve ambitious goals in education and public programming, improved access and community outreach, and the innovative use of new technologies to fulfill its mission and more effectively engage the next generation of audiences, locally as well as internationally. This $525 million comprehensive campaign will renew and improve the Museum’s landmark main building, strengthen its endowment, and support new initiatives that will ensure that it remains one of the city’s most dynamic public institutions and a leader among its peers. The largest cultural fundraising campaign in
Philadelphia Museum of Art photo
(L-R): Mayor Jim Kenney; Leslie Anne Miller, chair of the Board of Trustees of the Philadelphia Museum of Art; Frank Gehry, architect; Timothy Rub, George D. Widener, director and CEO of the Philadelphia Museum of Art; Constance H. Williams, chair emerita of the Board of Trustees of the Philadelphia Museum of Art; Gail Harrity, president and COO of the Philadelphia Museum of Art; Katherine Sachs, trustee and co-chair of It Starts Here: Campaign for the Philadelphia Museum of Art; Barbara B. Aronson, trustee and co-chair of It Starts Here: Campaign for the Philadelphia Museum of Art; Safiya Wharton, Philadelphia Museum of Art teen ambassador during the groundbreaking moment in the Vaulted at the Philadelphia Museum of Art.
Philadelphia’s history, It Starts Here has already raised more than $326 million, just more than 62 percent of its total goal. Three Trustees are spearheading this effort as Campaign Co-chairs: Barbara B. Aronson, David Haas, and Katherine Sachs. Trustee Bruce E. Toll serves as the Campaign’s vice chair. To date, the Philadelphia Museum of Art has received generous lead contributions for It Starts Here from Marguerite and Gerry Lenfest, the late Robert L. McNeil, Jr., and Constance and Sankey Williams. Additional leadership gifts have come from the late Daniel W. Dietrich II, David Haas, Keith L. and Katherine Sachs, the Commonwealth of Pennsylvania, and the city of Philadelphia. With such early and strong support in hand as it breaks ground, the Museum is assured of achieving the campaign goals and completing the Core Project. Tom Wolf, Governor of Pennsylvania, stated, “Great cities have great art museums. This was
Architectural rendering by Gehry Partners, LLP and KX-L
1D West Entrance. Access is critical — and here Frank Gehry has again camouflaged his mark. These new ADA-compliant ramps update the entrance with a modern aesthetic, yet also feel as if they’ve always existed.
the principle that drove the civic leaders of the early 20th century to construct a magnificent building in the middle of Fairmount Park that we now know as the Philadelphia Museum of Art main building. In the almost 90 years since it opened to the public, the Museum has proved to be a vital educational resource and economic contributor. As the city of Philadelphia
experiences a renaissance, the Museum continues to play a critical role in the vibrancy of this great city. That is why as Governor of Pennsylvania I am thrilled to support the Philadelphia Museum of Art’s transformation through the Core Project.” Jim Kenney, Mayor of Philadelphia, stated: “One hundred years ago, civic and political lead-
ers set out to achieve a bold vision, to construct a new art museum building that would increase the visibility of the city and secure its place in the world. And when this new building was completed in 1928, our city received both a cultural heart and a source of civic pride. Now, a new generation of Philadelphians will be able to enjoy this architectural treasure. This museum welcomes hundreds of thousands of visitors from across the region, country, and world. In a given five-year period, this level of activity has an economic impact on the local economy of more than $1 billion and generates over $80 million in tax revenue. The completion of this project is likely to make those numbers grow. This project is not just vital to the institution, but also to Philadelphia. I frequently speak about the impact public-private partnerships have on Philadelphia and its residents. This Museum’s formation is a shining example of that. And that continues today; I am proud to announce that my Administration has committed $32.5 million of capital support over the next six years to help fund the Core Project.” The Core Project is part of a long-term facilities master plan developed by renowned architect Frank Gehry. Designed to be implemented in several phases, as time and resources permit, this plan addresses several important goals: the renewal or replacement of antiquated building systems; the reorganization of the interior to improve wayfinding and the addition of new amenities to enhance the visitor experience; and the addition of new gallery space to accommodate a growing collection. Frank Gehry recalls his first impression of the main building and how he approached this project at the outset: “I walked through the building and I saw that all you had to do was follow the yellow brick road, so to speak. It was all there, and it showed you what you could do.” As its title suggests, the Core Project — the second phase of the Facilities Master Plan — focuses on the heart of the building. The West Terrace will be entirely see MUSEUM page 110
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 9
QUALITY USED EQUIPMENT VALUE V ALUE & PERFORMANCE ASSURED
2012 CAT 420F IT, 2,825 HRS, S/N: JWJ00297, STOCK #: BJWJ297...... $69,000
2011 CAT 314D LCR, S/N: SSZ00455, STOCK #: BSSZ455, 4,321 HRS.............. $102,000
COMPACTORS-SMOOTH DRUM 2009 CAT CS56, HOURS: 3,202, SERIAL NUMBER: C5S00534, STOCK NUMBER: RCC5S534, EROPS, AIR CONDITIONER........................................................................................................$84,000 DOZERS - CRAWLER 2012 CAT D3K2 LGP, PL522 FOLEY INSTALLED, HOURS: 2,427, SERIAL NUMBER: KLL00182, STOCK NUMBER: TKLL182........................................................................................................$73,000 2013 CAT D5K2 XL, LANE 2 ORDER, ENGINE,EPA 4I,EU IIIB,MLIT 4, DRIVE: STANDARD, UNDERCARRIAGE: SALT, TRACK, 20", MS, SALT, HYDRAULICS, 3 VALVE, STANDARD, LIGHTS: 6, CAB: ROPS, SEAT,CLOTH, HEATED SEAT & AMP; CNTRLS, SOUND SUPPRESSION: OMISSION, GRILL, RADIATOR, STANDARD, GUARD GP: REAR OMISSION, DRAWBAR: STANDARD, HOURS: 918, SERIAL NUMBER: KWW00524, STOCK NUMBER: 13M0147................................................ $113,000 2013 CAT D6N LGP, EROPS, AIR CONDITIONER, HOURS: 2,131, SERIAL NUMBER: PBA00582, STOCK NUMBER: RCPBA582.................................................................................................. $199,000 2012 CAT D6T LGP VP, ULTRA LOW SULFUR DIESEL FUEL, LANE 2 ORDER, BASIC ARRANGEMENT, FINAL DRIVE: XW/LGP, ENGINE: BASIC, PRECLEANER: BASIC, OIL DRAIN: BASIC, UNDERCARRIAGE, S1, CTR GUIDE, TRACK:790MM / 31" ES OFFSET S1, FAN: BASIC, CONTROL, RIPPER, FOR GUARD, ALTERNATOR: 150AMP, STARTER: HEAVY DUTY, LIGHT, 10, PREMIUM, HOURS: 4,274, SERIAL NUMBER: KSB01215, STOCK NUMBER: BKSB1215................................................ $178,000 EXCAVATORS - CRAWLER 2013 CAT 308E CR SB, HOURS: 1,481, SERIAL NUMBER: GBJ01367, STOCK NUMBER: BGBJ1367 .................................................................................................................................................... $76,000 2015 CAT 314E LCR, R-BOOM: 9'10" STICK HD PKG, R-CYLINDER PKG, TRACK: 20" TG W/RUBBER PAD, GUARD, TRACK GUIDING, CENTER, COMBINED CIR PKG, HYD VLV TCS PKG, COLD WEATHER STARTING PKG, CAB DUAL EXIT PKG, PANEL: STD START SWITCH, LIGHTING: CAB (HALOGEN), LIGHT: BOOM RIGHT SIDE, COOLING: HIGH AMBIENT PKG, *ENGINE HOOD, HOURS: 448, SERIAL NUMBER: ZJT01048, STOCK NUMBER: 14M0291................................................................. $170,000 2013 CAT 318EL, LIGHT: BOOM RIGHT SIDE, *CHANGER: HAND CONTROL 2-WAY, *RAIN PROTECTOR: CAB FRONT, *SEAT, H-BACK, W/HEATER,S/AIR, *LIGHTING: CAB (HALOGEN), *STANDARD OIL, *AIR CLEANER: STANDARD, *QUICK DRAINS: READY (OIL), *TRACK: 24" TG (GLT), *COVER, FENDER, STANDARD, HOURS: 615, SERIAL NUMBER: WZS00165, STOCK NUMBER: 14M0338...... .................................................................................................................................................. $153,000 2014 CAT 320ELRR, LANE 2 ORDER, REGIONAL PKG REGULATED (NACD), *ALARM: TRAVEL, *BELT, SEAT, 3" RETRACTABLE, *CONTROL: FINE SWING, *AIR CONDITIONER, *INSTRUCTION: NORTH AMERICA ANSI, *ACCUMULATOR WITH CRN, *PRODUCT LINK: CELLULAR PL522, ESBOOM: 9'6" ES-STICK PKG, *BOOM: 18' 8" ES, *STICK: 9'6'' B1 ES, HOURS: 1,302, SERIAL NUMBER: TFX00971, STOCK NUMBER: 13M0641................................................................ $149,000 1992 CAT 325L, HOURS: 10,486, SERIAL NUMBER: 8NK00106, STOCK NUMBER: CS8NK106........ .................................................................................................................................................... $39,000 2013 CAT 328D LCR, HOURS: 2,310, SERIAL NUMBER: RMX00474.................................. $245,000 2013 CAT 329EL, AIR CONDITIONER, AUXILIARY HYDRAULICS, UNDERCARRIAGE, HOURS: 2,457, SERIAL NUMBER: PLW01218, STOCK NUMBER: RCPLW1218............................................ $193,000 2013 CAT 336EL, HOURS: 3,091, SERIAL NUMBER: BZY02499, STOCK NUMBER: RCBZY2499...... .................................................................................................................................................. $226,000 2001 KOMATSU PC210 LC-6, HOURS: 6,143, SERIAL NUMBER: 34638, STOCK NUMBER: BK34638 .................................................................................................................................................... $34,900 1998 LINK-BELT LS-5800, HOURS: 8,608, SERIAL NUMBER: LE318-9736, STOCK NUMBER: LE3189736............................................................................................................................................ $29,000
2001 CAT 420D, 2,143 HRS, S/N: FDP00814, STOCK #: BFDP814.................... $42,000
EXCAVATORS - MINI (UP TO 12,000 LBS) 2014 CAT 300.9D, *300.9D MINI HYD EXC: T4 (NTE), *ALARM: TRAVEL, *LINES,HAMMER,WITH QUICK DISCON, *SAFETY BAR WITH 2" SEAT BELT, *INSTRUCTIONS: ANSI, *CONTROLS: PATTERN CHANGER, PACK: FLUID FILM, MANUAL: OPER. MAINT. ENGLISH, PACK, MHE COMPLETE, CONTAINER, LANE 1 ORDER, YANMAR ENGINE S/N 3TNV74F-SNNS, AIR FILTER, HOURS: 648, SERIAL NUMBER: LJ200259, STOCK NUMBER: 13M0575.................................................................. $17,500 2015 CAT 303E CR, *303E CR MINI HYD EXCAVATOR, *CANOPY, ROPS, 4POSTS, *TRACK, 300MM, RUBBER BELT, INSTRUCTIONS: ENGLISH, ROLL ON-ROLL OFF, LANE 2 ORDER, HOURS: 81, SERIAL NUMBER: HHM01303, STOCK NUMBER: 15M0290................................................................ $38,000 2014 CAT 303E CR, *303E CR MINI HYD EXCAVATOR, *CAB: WITH HEATER, *TRACK, 300MM, RUBBER BELT, SHIPPING/STORAGE PROTECTION, INSTRUCTIONS: ENGLISH, ROLL ON-ROLL OFF, LANE 2 ORDER, HOURS: 263, SERIAL NUMBER: HHM00198, STOCK NUMBER: 14M0231 $42,000 LOADER BACKHOES 2014 CAT 420F IT, AIR CONDITIONER, RIDE CONTROL, STICK: EXTENDED, BUCKET: GP, CONTROLS: JOYSTICK, BUCKET: REAR, COUPLER, AUXILIARY HYDRAULICS, 4-WHEEL DRIVE, ULTRA LOW SULFUR DIESEL FUEL, AM FM RADIO, HOURS: 805, SERIAL NUMBER: JWJ01919, STOCK NUMBER: 13M0616....................................................................................................................$83,000 MOTOR GRADERS 2015 CAT 12M3, EROPS, AIR CONDITIONER, ACCUMULATORS, PRODUCT LINK, LIGHTING, JOYSTICK STEERING, ULTRA LOW SULFUR DIESEL FUEL, MOLD BOARD 14' BASIC, TIRES: 17.5R25 BS VKT * D2A MP, SHANKS/TEETH: RIPPER/SCARIFIER, INSTALLATION: ACCUGRADE READY, HOURS: 162, SERIAL NUMBER: N9R00135, STOCK NUMBER: 14M0625.......................................... $315,000
Used Parts • Quality Parts • Attachments Are you looking for a reliable source for quality used components and parts? Outback Parts is linked nationwide with three used parts networks, so finding dependable parts fast and conveniently is never a problem. Outback Parts also supplies replacement parts for Non-Cat® machines. So when you’re needing parts, call or visit us on-line. Call: 732/885-3005 Fax: 609/443-1146 jmeyer@foleyinc.com
www.outbackparts.com
2011 CAT CB24, 534 HRS, S/N: 24001537, STOCK #: B24001537.................. $29,500
SKID STEERS - TRACK 2013 CAT 289C2, HOURS: 1,475, SERIAL NUMBER: RTD01714, STOCK NUMBER: TRTD1714....$46,000 2014 CAT 299D, PACK: DOMESTIC TRUCK, LANE 2 ORDER, INSTRUCTIONS: ENGLISH, SEAT BELT: 2", HEATER, ENGINE COOLANT, 120V, QUICK COUPLER: ELECTRIC, RETURN TO DIG/WRKTL POSITIONER, CONVERSION ARRANGEMENT, ROPS: ENCLOSED WITH A/C (C3), RADIO READY, DOOR, CAB, POLYCARBONATE, SEAT,AIR SUSPENSION,VINYL,HEAT, BATTERY, HOURS: 903, SERIAL NUMBER: GTC01221, STOCK NUMBER: 14M0088................................................................. $57,000 2014 CAT 299D, PACK: DOMESTIC TRUCK, LANE 2 ORDER, INSTRUCTIONS: ENGLISH, SEAT BELT: 2", HEATER, ENGINE COOLANT, 120V, QUICK COUPLER: ELECTRIC, RETURN TO DIG/WRKTL POSITIONER, CONVERSION ARRANGEMENT, ROPS: ENCLOSED WITH A/C (C3), RADIO READY, DOOR, CAB, POLYCARBONATE, SEAT,AIR SUSPENSION,VINYL,HEAT, BATTERY, HOURS: 1,277, SERIAL NUMBER: GTC00687, STOCK NUMBER: 13M0608................................................................. $54,000 SKID STEERS - WHEEL 2014 CAT 236D, HOURS: 245, SERIAL NUMBER: BGZ00404, STOCK NUMBER: CSBGZ404$35,000 2014 CAT 246D, PACK: DOMESTIC TRUCK, LANE 2 ORDER, TIRES: 12/16.5 CAT 10PR, INSTRUCTIONS: ENGLISH, SEAT BELT: 2", HEATER, ENGINE COOLANT, 120V, QUICK COUPLER: ELECTRIC, ROPS: ENCLOSED WITH A/C (C3), COUNTERWEIGHT, MACHINE, EXTERNAL, RETURN TO DIG/WRKTL POSITIONER, PACKAGE, PERFORMANCE, (H3), HOURS: 1,077, SERIAL NUMBER: BYF00829, STOCK NUMBER: 13M0633.................................................................................... $39,000 2015 CAT 246D, ONE SPEED, COUNTERWEIGHT,MACHINE,EXTERNAL, DISPLAY, ADVANCED, LCD, CAMERA, SEAT,AIR SUSPENSION,VINYL,HEAT, LANE 2 ORDER, CONVERSION ARRANGEMENT, INSTRUCTIONS, ANSI, USA, ROPS: ENCLOSED WITH A/C (C3), DOOR, CAB, POLYCARBONATE, RADIO READY, BATTERY, HEAVY DUTY, 850 CCA, SEAT BELT: 2", HOURS: 296, SERIAL NUMBER: BYF01550, STOCK NUMBER: 14M0413................................................................................... $44,000 2015 CAT 262D, *262D SSL TIER 4 FINAL HRC, *PACKAGE, PERFORMANCE, (H2), *HYDRAULICS, PROPORTIONAL, WT, *ROPS: ENCLOSED WITH A/C (C3), *SEAT,AIR SUSPENSION,CLOTH,HEAT, *DOOR, CAB, GLASS, *DISPLAY, ADVANCED, LCD, *QUICK COUPLER: ELECTRIC, *CONVERSION ARRANGEMENT, *RADIO READY, *SEAT BELT: 2", HOURS: 130, SERIAL NUMBER: DTB02869, STOCK NUMBER: 14M0694.......................................................................................................$44,000 2014 CAT 262D, PACK: DOMESTIC TRUCK, LANE 2 ORDER, TIRES: 12/16.5 CAT 10PR, INSTRUCTIONS: ENGLISH, SEAT BELT: 2", HEATER, ENGINE COOLANT, 120V, QUICK COUPLER: ELECTRIC, ROPS: ENCLOSED WITH A/C (C3), TWO SPEED WITH RIDE CONTROL, COUNTERWEIGHT,MACHINE,EXTERNAL, RETURN TO DIG/WRKTL POSITIONER, PACKAGE, HOURS: 764, SERIAL NUMBER: DTB00908, STOCK NUMBER: 13M0635..............................$40,000 SWEEPERS / BROOM EQUIPMENT 2010 TERRAMITE TSS48, 8 FT RIDE ON SWEEPER NO CAB KUBOTA 37 HP DIESEL ENGINE, 100 GALLON WATER TANKS, HIGH CAP HYD OIL AND FUEL TANKS, POLY AND WAFER WIRES, FUEL TANK CLEANOUT, VARIABLE BROOM SPEED CONTROL W/ DUAL DRIVE MOTORS, FULL INSTRUMENTATION, 4 WHEEL TOWING W/ TOW ALARM SYSTEM, HOURS: 3,813, STOCK NUMBER: 10R0325........................................................................................................................................$7,000 2010 TERRAMITE TSS48, 8 FT RIDE ON SWEEPER NO CAB KUBOTA 37 HP DIESEL ENGINE, 100 GALLON WATER TANKS, HIGH CAP HYD OIL AND FUEL TANKS, POLY AND WAFER WIRES, FUEL TANK CLEANOUT, VARIABLE BROOM SPEED CONTROL W/ DUAL DRIVE MOTORS, FULL INSTRUMENTATION, 4 WHEEL TOWING W/ TOW ALARM SYSTEM, HOURS: 408, STOCK NUMBER: 10R0326....................................................................................................................................... $6,500
ASK ABOUT OUR FLEET RESTRUCTURING OPTIONS. WE CAN HELP WITH ONE MACHINE OR THE ENTIRE FLEETT.. RICH CALIFANO International & Domestic Used Equipment Sales & Purchasing
RCALIFANO@FOLEYINC.COM 732-261-8424
1-800-939-6611 855 CENTENNIAL A AVENUE VENUE PISCATA AT TA AW WAYY,, NJ 08854 WWW.FOLEYINC.COM/USED
TOM ALFANO International & Domestic Used Equipment Sales & Purchasing
TTALF ALFANO@FOLEYINC.COM 732-261-8430
Page 10 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
2001 KOMATSU WA320-6 WHEEL LOADER, ENC CAB W/AIR & HEAT, CLAMSHELL MP BUCKET, ECSS RIDE CONTROL, 20.5R25 SOLID TIRES, 3 SPOOL VALVE, AUX HYD, QUICK COUPLER, C022071.................................................. $69,500
2012 JCB 406B WHEEL LOADER, ENC CAB w/ A/C & HEAT, GP BUCKET, COUPLER, 12.5R18 MICHELIN TIRES, AUXILIARY HYDRAULICS, 3 SPOOL VALVE, C022859........$42,500
2013 KOMATSU WA200PZ-6 WHEEL LOADER, ENC CAB W/AIR & HEAT, KO 84” GP BUCKET W/BOCE, BUCKET LEVELER/ KICKOUT, KO QUICK CPLR, JRB 60” FORKS, 20.5R25 MICHELIN A-2 TIRES, C023461.............................. $109,000 YR
Model EE# CRAWLER DOZERS/LOADERS KOMATSU 2015 D51PXi-22 C019464 1999 D65EX-12 C020925 2012 D65WX-17 C005727 EXCAVATORS CATERPILLAR 2002 345BL C023114 HITACHI 2004 ZX800 “ZAXIS” C008172 JOHN DEERE 2008 190DW C021549 KOBELCO 2012 SJK210LC-9 C019951 KOMATSU PC120LC-6 C023164 2013 PC138USLC-10 C022755 2014 PC138USLC-10 C024556 1995 PC150-5 C023655 2013 PC160LC-8 C024006 2013 PC160LC-8 C024008 2014 PC160LC-8 C024245 2013 PC170LC-10 C022916 2001 PC210LC-6K C020926 2016 PC210LC-10 C022002 PC228USLC-1 C024250 2013 PC240LC-10 C006323 2013 PC240LC-10LR C022421 2005 PC270LC-7 C020272 2014 PC290LC-10 C022744 1993 PC300LC-5 C020933 PC300LC-6 C021741 2003 PC300LC-7 C019345 2003 PC300LC-7 C023160 2013 PC360LC-10 C006325
PRICE
$199,000 $49,500 $179,000
SOLD $55,000 $225,000 $59,500 $79,000 SOLD $69,000 $129,000 $TBD $29,500 $59,000 SOLD $72,500 SOLD $95,000 $139,000 $45,000 $189,000 SOLD $TBD $169,000 $189,000 $39,500 $210,000 SOLD $29,000 $52,500 $65,000 SOLD $59,000 $269,000
2013 KOMATSU WA500-7 WHEEL LOADER, ROPS CAB W/AIR & HEAT, 138” / 8 CY GP BUCKET W/BOCE, 29.5R-25 MICHELIN XHT TRES, POWERSHIFT TRANS, 4 SPEEDS F/R, ECSS RIDE CONTROL, C020552.................................................. $179,500 YR 2014
Model EE# PRICE PC360LC-10 C021518 $229,000 PC400LC-5 C023172 $19,500 2010 PC450LC-8 C005953 $179,000 2013 PC490LC-10 C006069 $239,000 2008 PC800LC-8 C022399 $339,000 LIEBHERR 2006 A900C C003281 $79,000 MATERIAL HANDLERS, RECYCLERS CATERPILLAR 2002 350L-MH C023522 $79,500 FUCHS 2005 MHL350D C003296 SOLD $79,000 2011 RHL340D C022333 $179,500 2015 MHL360E C022898 $449,000 2005 Grapple for MHL350D C003297 $8,000 2007 Grapple for MHL350D C003670 $4,000 KOMATSU 1989 PC300MH-3 C023651 $30,000 SENNEBOGEN 2004 830 C005918 $59,000 2007 830M C022591 $35,000 2010 830M C022032 $89,500 2012 830M C022031 $219,000 2014 840M C022592 $279,000 2014 875E C023523 $1,250,000 WHEEL LOADERS CATERPILLAR 2006 924G C022174 $52,500 966G C024014 SOLD $TBD 966G C024015 SOLD $TBD 2014 980K C024033 $TBD JCB 2012 406B C022859 $42,500 KOMATSU WA200-6 C022593 $79,500 2013 WA200PZ-6 C023461 $109,000
YR 2000 2014 1997 2004 2004 2013 2012 1997 2013 2000 2012
Model WA320-6 WA320-7 WA380-3 WA400-5L WA400-5L WA470-7 WA470-7 WA480-6 WA500-1 WA500-7 WA600-3 WA470
EE# C022071 C005540 C006463 C023548 C024746 C021898 C006216 C020239 C023661 C020552 C022042 C024845 GRADERS
PRICE $69,500 $159,500 $29,000 $35,000 $TBD SOLD $112,000 $195,000 $95,000 $TBD $179,500 $49,500 $TBD
KOMATSU GD650AW-2 C020907 $49,500 650AW-2 C023121 $TBD 2005 GD655-3C C003433 $89,500 2008 GD655-3E0 C004620 $139,500 COMPACT TRACK LOADERS JCB 225T C020581 $25,000 MILLERS, PAVERS, ROLLERS HAMM 2010 HD10CVV C021850 SOLD $15,000 2010 HD10VV C021840 $29,500 2011 HD+120VVHF C004069 $109,000 INGERSOLL RAND DD130 C023319 $27,500 LEEBOY L8510T C022008 $32,500 TRAILERS EAGER BEAVER 12HD-PT C022758 $TBD
Representing These Fine Lines of Equipment: WIRTGEN • VOGELE • HAMM • KLEEMANN • NPK • TROUT RIVER • JCB • SENNEBOGEN DOPPSTADT • JRB • BROCE • BAGELA • CARLSON • ROGERS BROS • ESCO • LA BOUNTY • KOMATSU • FELLING
2006 CATERPILLAR 924G WHEEL LOADER, ENC CAB W/AIR & HEAT, CAT GP BUCKET W/BOCE, QUICK COUPLER, 17.5R25 TRIANGLE E-3 TIRES, AUX HYD, CO22174 $52,500 YR Model EE# PRICE ROGERS 1997 CR50PL C008064 $28,000 SP50PL C021755 $28,000 TAG21 C023198 $TBD CRUSHING & SCREENING EQUIPMENT CEC REDUCED $149,000 2007 CEC 32”x54” jaw crusher C003725 OFF-ROAD TRUCKS PAYHAULER 1995 350C C022041 $49,500 MISCELLANEOUS BUCYRUS ERIE 1980 88B C020922 $225,000 DOPPSTADT 2012 SM720 Trommel C021573 $159,000 CATERPILLAR RM-500 C023192 $225,000 ATTACHMENTS CATERPILLAR 52” Exc. Bucket/345 C006595 $3,900 HAMM 2012 Pad-foot shell kit for 3412, 84” Drum P.O.R. LaBOUNTY 2003 UP20 pulverizer jaw set 18715 $4,500 2009 CP60 pulverizer (PC200/PC308 linkage) C000879 $19,500 HDR40 C005990 $12,500 HDR50S C020273 $8,500 1500R Shear C008173 $65,000 NPK 2010 GH4 C005986 $7,500 2000 GH6 C021137 $14,900 2008 GH15 C002364 $39,000 ROCKLAND 2009 BTH-D-CL hydraulic thumb C000380 $7,500 HD-V spade-nose rock bucket for WA500-3 $15,000
Contact: Hank Ruttura • Holbrook Office
631-563-7600
DENOTES KOMATSU CERTIFIED REMARKETING USED MACHINE DEPENDING ON CERTIFIED GRADE, UNIT MAY QUALIFY FOR SPECIAL FINANCING RATE AND/OR MANUFACTURER SUPPORTED WARRANTY. PLEASE CONTACT US FOR ADDITIONAL DETAILS ON THESE OR ANY OF THE ABOVE MENTIONED USED PIECES.
www.ehrbar.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 11
NEW ROGERS 55 TON GENTLE RISER IN-STOCK!! Rear Frame Cutout
Twin-Bag Air Lift Night Battery & Strobes 4th Axle Ready
• No-Foot Neck Adjustable Width Bi-Fold Ramps
Rogers Severe Duty 55 Ton CobraNeck, Ratchet Design Ride Height, 26’ Clear Deck, 20” Deck Height, Adjustable Width Bi-Fold Ramps, Custom Stick Pocket, Twin Bag Air Lift, 275’s, Aluminum, Night Lights, Strobes........ IN STOCK!
Rogers 35 Ton Gentle Riser, 24’ Deck, 20” Loaded, Adjustable Width Bi-Fold Paver Ramps, 275’s on Aluminum, Night Lights, Strobes.......... ................IN STOCK!
Rogers TAG21XXL, 21 Ton Capacity, Premium Specs, Superior Quality, 235’s Aluminum, 7-Year Warranty, Black or Red Paint.. ............ IN STOCK!
Felling FT-45-2 LP, 24’ Deck, Double Gear, 6’ Double Incline Tail, 235/75R-17.5 Tires, 38”x93” Air Ramps.................. .......... IN STOCK!
Rogers Dropside, 55 Ton, 26’ Deck, Heavy Lift Package, Air Lift 3rd & 4th, ‘2005’ Just Traded!.............. .............. IN STOCK!
NEW ARRIVAL!
Rogers 55 Ton Custom, 25' clear deck, Cutout, Adjustable Width BiFold Ramps, Reinforced Wheelcovers, 275’s, Aluminum, TwinBag Air Lift 3rd, Black or Red Paint.. .............. IN STOCK!
Rogers TAG25XXL, 25 Ton Capacity, Premium Specs, Quperior Quality, 235’s on Aluminum, Air Lift Front Axle, 7-Year Warranty, Black or Red Paint.... .............. IN STOCK!
Felling FT-45-2 LP 24’ Deck, Double Gear, 6’ Double Incline Tail, 235 Tires, 45”x93” Air Ramps, Viper Red........ .................... IN STOCK! ASK ME ABOUT AIR RAMPS!
Page 12 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Construction Equipment & Supplies
FOR SALE OR RENT Rentals - Sales - Service - Parts - Training Introducing Our New
Product Line, Takeuchi
• True pilot controls • Overhead roll up door • Rear view camera • First in industry with Takeuchi Fleet Management
Takeuchi TL12V2 Track Loader
• Largest rated operating capacity in the industry • Most responsive, reliable controls in the industry
®
NOW IN PA & NJ!
Wacker Neuson 3503 Compact Excavator
• 7,937 Lb Operating Weight • 127” Digging Depth • 143” Dumping Height • 204”L x 64”W x 95” H • 32.2HP Engine Performance
• • • • •
New ergonomic & advanced cab design Cycle time improvements of 3% - 5%! Operating weight: 47,840 lbs Max dig depth: 21’10” ft/in Bucket digging force: 34,170 lbf
Link-Belt 210X3 Excavator
We are a Full-Service Certified Dealer
• Increased load capacity & greater reach at full height • Hinge Pin Height: 81” • Operating Capacity: 1,075 lbs • Ground Clearance: 6”
Dingo TX 1000 Wide Track
0% Financing Available!
Gehl RT210 GEN: 2 Track Loader
• IdealTrax™ Automatic Track Tensioning System • Gross Power @ rpm: 72 hp @ 2500 • Operating Capacity: 3,000 lbs.
Visit Our New Location!
Items Available for Sale or Rent!
1010 Conshohocken Rd., Conshohocken, PA 610-279-5777 Ext. 3055
Call Rich Hess
www.NorrisSales.com 668 Berlin Cross Keys Rd., Sicklerville, NJ 856-740-1400 Ext. 2005
Call Frank Kimberling
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 13
$ ',675,%87,21 $1' 6833257 1(7:25. /,.( 12 27+(5
ZDVWH UHF\FOLQJ SRUW PDQDJHPHQW FRQVWUXFWLRQ SLSH VWHHO PHWDOV UHF\FOLQJ
5(*,21$/ &200,70(17 */2%$/ 5(6285&(6
Page 14 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Manitowoc, Stephenson Celebrate New NTC55 Truck Crane Manitowoc Cranes celebrated the release and first five retail orders of the new National Crane NTC55 truck crane at a special ceremony at ConExpo 2017. Present was Stephenson Equipment, the Harrisburg, Pa.based dealer, who partnered with Manitowoc to design the crane. Five of Stephenson’s customers who placed orders for the new truck crane were honored at the celebration: Mount Joy, Pa.-based Greiner Crane, the first company to purchase the NTC55; York, Pa.based Iron Stag Crane Service; Williamsport, Pa.-based Allison Crane & Rigging; Skippack, Pa.based H&K Group; and Bob’s Crane Service, based in Kennett Square, Pa. A Product Is Born “The NTC55 is an evolution of a product that was originally introduced by National in 2010, which was the NBT55, and I saw the need to include some enhancements on the NBT product that would make the crane much more versatile and fit in a typical truck crane application as opposed to just being a boom truck,” Stephenson’s Crane Sales Manager Steve Tucci said. According to Tucci, the primary difference between a boom truck and a typical truck crane is the outrigger stance. “The outrigger stance on boom truck is typically 24 feet. In many cases, it doesn’t fit into the typical 40 ton, 50-ton truck crane application, which is only usually a 20foot outrigger span.” Tucci was looking for a tilt cab for better visibility when people are working at elevation and for different counterweight splits to give the crane the ability to fit different travel applications, making it more versatile. These concepts were taken to National Crane’s lift solution group, who engineered the changes needed to create this new model crane. “As the process evolved, our goal was to develop a product on four axles that would meet Pennsylvania highway regulations, which is extremely hard to do in this size class machine,” Tucci said. “Through that, we worked closely with Peterbilt to develop
Manitowoc Cranes celebrated the release and first five retail orders of the new National Crane NTC55 truck crane at a special ceremony at ConExpo 2017.
the truck to fit the application. Everything about the truck is to enhance its road-ability. The split counterweight is also with the design to enhance capability for road-ability. The previous model had a 76-degree boom angle. We requested this model have an 80degree boom angle so you have the ability to reach higher elevation. Working in Tight Spots The all-new 55 ton (50 t) NTC55 is an evolved truck crane “replacement” that can maneuver into the tight working quarters typically reserved for a truck crane, but with the added features of a boom truck to increase versatility on the job site, according to the manufacturer. The new model boasts a fourposition outrigger system that gives the crane the reach and capacity of a 55-ton boom truck when fully extended. In tighter working quarters, such as those found in urban environments, the NTC55 can retract its outriggers to 75 percent span to take up less space while maintaining greater capacity than other truck cranes with similar footprints. “It’s a very compact package,” said Rich Nicols, owner of Bob’s Crane Service. “It is a crane that I
can get a lot of crane in a very little tight spot. A huge part of my business is residential tree work, where I will back into a driveway, set up and bring a tree from the back of the yard, the back corner, over the house and bring that tree out front. It’s a very tight job area. “Homeowners have an eightfoot driveway, so the crane has to be eight feet,” Nicols said. “It is always a really tight set up and so you have to negotiate lots of spots to figure out how to get it set up and then you still have to have a lot of crane, because tree work is inherently touchy. You need a lot of crane in a tight spot. This is 26 feet wide and very short. Through Peterbilt’s magic it will turn very tightly. I can almost back in a driveway, not like a car, but similar to a car, where you don’t have a lot of egress and entrance room.” Allison Crane & Rigging also appreciates the crane’s size. “What this crane does is fill a gap that we currently have, so we do not have to send the big truck cranes; we can send the small boom truck,” company President Larry Allison said. “It has the capacity. The strength of this new crane is really key to filling that hole.” see STEPHENSON page 126
The all-new 55 ton (50 t) NTC55 is an evolved truck crane “replacement” that can maneuver into the tight working quarters typically reserved for a truck crane, but with the added features of a boom truck to increase versatility on the job site, according to the manufacturer.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 15
Page 16 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
PERFOR RMAN NCE you u can ccount on o
Count on Hoffman Equipment Q Quick parts
Q Extensive re ental fleet
Q Dependable se ervice
Q Equipment when you need it
24 Hour Emergency Line 800-4-HOFFMAN New Jersey Corporate Headquarters 300 South Randolphville Roadd Piscataway, NJ 08854 732-752-3600
South Jersey 2610 South Black Horse Pike P Williamstown, NJ 08094 856-875-0036
New York Mid-Hudson Valley 1440 Route 9W Marlboro, NY 12542 845-236-3000
New York York City 1144 Zerega Avenue Bronx, NY 10462 718-822-1180
Loong Island 222 Peconic Avenue M Medford, NY 11763 6331-207-2900
www.h hoffmanequip.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 17
WHEN YOUR JOB IS S ON THE LINE GET H.O. PENN RENTALS ON THE LINE
Like us u on Facebook Keyw word: H.O. Penn Machineryy
1-888-R RENT-C T-CAT AT www.hoppenn.com
Since 1923 3
Page 18 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Voorhees, NJ 800-232-6535 Allentown, PA 800-383-8894 Portland, ME 800-325-4253 Springfield, MA 800-854-5306
Baltimore, MD 888-601-7500 Walpole/Boston, MA 800-854-5310 Scranton, PA 800-569-1400
Elkton, MD 800-544-7127 Delmarva, DE 866-486-1400
HALE HAS IT!
www.haletrailer.com
New Heavy Haul Arrivals Llamé NJ para empleado qué habla español • 800-232-6355 Ext. 193
IN STOCK
New Fontaine 3+3+3 80 Ton Widespread Lowboys, Available in Flat Deck & Drop Side Deck, All Components Available, Call for More Info
New Talbert and Etnyre 65 Ton Wide Spread Capable Lowboys IN STOCK
IN STOCK
Magnitude 704 Tri-Axle • 70 Ton Capacity as 4-Axle • 3rd Axle Air Lift • 28’ Drop Side Deck • Modular Design Widespread Components Available • 4th Axle Available • Drop Side or Flat Floor 275/70R 22.5 Tires w/Steel Disc Wheels
New XL Specialized 85 Ton Light Weight Lowboy, 30’x120” Air Ride, 3+3+3 Capable, Call for more information
New East walking floors, 48' long x 102" x 13', spring suspension; Keith walking floor installed. Also available, used aluminum refuse trailer.
New Fontaine Traverse Hydraulic Tail, 48' x 102", Air Ride, 40 Ton Capacity Upper Deck Ramp, 18k Winch, Remote
New Manac 87 Cu. Yd. Hardox 450 Steel Dumps, 40'x102"x100" single point susp., barn door, 11R245 tires
New Talbert 20 Ton Tag Trailers, 21’x102”, Spring Suspension Wood Filled Ramps
New Fontaine & Talbert Dropside 55 & 60 Ton Lowboys, 26' Deck, 22.5 Wheels, Air-Ride/ Air Lift and Modular Available
New Fontaine Velocity Steel Drop Decks, 48’x102”, Air ride Spread, Bulkhead and Winches
NEW TALBERT & FONTAINE 5O & 55 TON LOW BOYS, Flat Level Deck & Raised Center, 25’ & 26’ Deck Lengths, (2) King Pin Locations, Automatic 3rd Axle Air Lifts, 275/70R 22.5, 3+1 Capability, In Stock!
New Talbert 35 Ton Lowboys 22" Deck Height, Air Ride Suspension
New Landoll Slide Axle Trailers, 50'x102", Air Ride Suspension, 20K Winch, Wireless Remote, PSI System & Dock Levelers Optional
Excellent We Rent Lowbeds Financing We Rent Walking Floors Available
www.haletrailer.com
We Rent Lowboys, Blade Trailers, Etc.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 19
EXCAVATORS
2009 KUBOTA RTV500 (6010732), 700 Hrs, Open ROPS, Canopy, Manual Dump Bed, ATV Tires.......... ................................................ $5,500
1998 INGERSOLL RAND SD115 (6004729), 8831 Hrs, 84” Dirt Roller .............................................. $29,000
2006 KUBOTA U15R1 (6008882), 3520 Hrs, Open ROPS Canopy, Rubber Tracks, Quick Coupler, 18” Bkt, Aux Hyd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12,500 2014 KOBELCO 17SR (2901704), 600 Hrs, Open ROPS Canopy, Rubber Tracks, QC, 12” Bkt . . . . . . . . . . . . . $23,200 2006 KOBELCO SK135SR LC (6008883), 5650 Hrs, Cab w/AC, Steel Tracks, 36” Bucket . . . . . . . . . . . . . . . . . $39,500 2013 KOBELCO SK35SRC (2903506), 650 Hrs, Cab w/heat, AC, rubber tracks, 4 way angle blade . . . . . . . $39,900 2011 KOBELCO 70SR (2907018), 1,300 Hrs, Cab w/heat, AC, rubber tracks, 30” pin on bucket . . . . . . . . . . . . . $49,000 2013 KUBOTA KX040-4R3A (3004658), 700 Hrs, Cab w/AC, Rubber Tracks, Angle Blade, QC, 24” Bkt, Hyd Thumb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $50,500 2013 KUBOTA U55-4R3A (3004674), 1,500 Hrs, Cab w/heat, AC, rubber tracks, angle blade, QC, 24” bucket, HYD thumb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $57,900 2013 KUBOTA KX057-4R3 (3004673), 1,300 Hrs, Cab w/heat, AC, rubber tracks, QC, 24” bkt . . . . . . . . . . . . $59,000 2013 KUBOTA KX080-4R3A (3004660), 1,500 Hrs, Cab w/heat, AC, rubber tracks, angle blade, QC, 30” bkt, HYD thumb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SOLD $83,200 2009 KOBELCO SK350-8 (2935001), 2,200 Hrs, Cab w/ heat, AC, 54” bucket . . . . . . . . . . . . . . . . . . . . . . . . . $112,000 2012 KOBELCO 235SR (2923512), 1,600 Hrs, Cab w/heat, AC, 42” bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $125,000 2009 KOBELCO SK260LR (2926001), 1,400 Hrs, Cab w/ heat, AC, 42” bucket, long reach . . . . . . . . . . . . . . . . $140,000 2013 KOBELCO SK260SR (2926004), 1,200 Hrs, Cab w/heat, AC, HYD QC, 42” bucket . . . . . . . . . . . . . . . $159,900
LOADER-BACKHOES 2009 CAT 279C CTL (6003756), 3,900 Hrs, Cab w/heat, AC, GP bucket....................................$33,000
2008 JOHN DEERE 310J (6002976), 1,500 Hrs, Canopy, 2WD, 1.13 cu yd Bkt, 24” Backhoe Bkt . . . . . . . . . . . $22,000 1997 JOHN DEERE 410E (6002975), 5,800 Hrs, Cab w/Heat, AC, 4WD, 1.5 cu yd Bkt, 24” HD Backhoe Bkt, Extendahoe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $23,500 2013 NEW HOLLAND B95C (6002978), 2300 Hrs, Cab w/AC, MP Bkt, 12” Backhoe Bkt, Extendahoe . . . . . . $65,000 2013 JOHN DEERE 310SK (6002980), 3575 Hrs, Cab w/AC, 3 FNC Loader w/Coupler, 18” Backhoe Bkt . . $72,000 2013 JOHN DEERE 310K (20310537), 700 Hrs, Cab w/heat, AC, 4WD, 1.25 cu yd Bkt, 24” Backhoe Bkt, Extendahoe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $77,000
2013 JOHN DEERE 310SK (20310540), 1,500 Hrs, Cab w/heat, AC, 4WD, 1.3 cu yd Bkt, 24” Backhoe Bkt, Extendahoe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $87,000
DOZERS 2012 JOHN DEERE 450J LGP (2045238), 1,600 Hrs, Cab w/heat, AC, 115” blade . . . . . . . . . . . . . . . . . . . . . . . . .$79,000
SKID STEER & COMPACT TRACK LOADERS 1998 BOBCAT 773 SSL (6003764), 2,425 Hrs, Cab w/Heat, Hand Foot Controls, Manual QC . . . . . . . . . . . . . . . . . $11,000 2005 BOBCAT S150 SSL (6003765), 975 Hrs, Cab w/Heat, Hand Foot Controls, HYD QC . . . . . . . . . . . . . . . . . . $18,500 2013 TEREX PT30 CTL (6003754), 896 Hrs, Cab w/heat, 48” bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $23,000 2011 GEHL V330 SSL (5033001), 750 Hrs, Cab w/heat, AC, 84” bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $32,000 2009 CAT 279C CTL (6003756), 3,900 Hrs, Cab w/heat, AC, GP bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $33,000 2012 KUBOTA SVL 90-2HC CTL (3011022), 1,200 Hrs, Cab w/heat, AC, 80” bucket, HYD QC . . . . . . . . . . . . $49,500
TRACTORS & UTILITY VEHICLES 2009 KUBOTA RTV500 (6010732), 700 Hrs, Open ROPS, Canopy, Manual Dump Bed, ATV Tires . . . . . . . . . . . . $5,500 2010 KUBOTA BX25TLB (6005261), 220 Hrs, LA240 Loader, BT601 Backhoe, ROPS . . . . . . . . . . . SOLD $14,000 2011 KUBOTA L3240HST-3 (6005233), 1,117 Hrs, Turf Tires, Front Loader, Quick Coupler, 72” Bkt . . . . . . . . $16,995 2013 KUBOTA M6060HDC (6005263), 1,100 Hrs, Cab w/Heat, Industrial Tires, Front Loader, Quick Coupler, 72” Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $31,250
LOADERS 1991 JOHN DEERE 544E (6002977), 7,217 Hrs, Cab w/Heat, 4 in 1 Bkt Welded Closed, New Tires . . . . . . $22,000 1998 JOHN DEERE 544G (6006709), 7400 Hrs, Cab w/Heat, JRB Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . $35,000 2010 KAWASAKI 70TMV-2 (2707005), 1,450 Hrs, 3.5 cu yds bucket, quick coupler, ride control . . . . . . . . . . . . . . . $129,000
COMPACTION & PAVING EQUIPMENT 2010 DYNAPAC LP8504-33 (4007034), 275 Hrs, Radio remote controlled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $11,900 1998 INGERSOLL RAND SD115 (6004729), 8831 Hrs, 84” Dirt Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $29,000 2011 DYNAPAC CA134D (4007040), 950 Hrs, 54” dirt roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $36,800 2014 GEHL 1648P (6004728), 955 Hrs, 8'-13' width vibratory screed, 6 ton hopper, single speed hydrostatic . . . . . . .$37,000 2010 DYNAPAC CA250D-II (4007022), 1000 Hrs, 84” dirt roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $62,500
ARTICULATED DUMP TRUCKS 2013 BELL B35D (4003502), 1,500 Hrs, 35 ton ADT, GPS system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$325,000
MISCELLANEOUS ARPS 72” LANDSCAPE RAKE (6010737), 3 Point Hitch Mount, Manual Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . $500 JOHN DEERE MP BUCKET (6010734), For John Deere 310B/Older . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $500 2016 WERK-BRAU WB60 (5801982), 60” Grading Bucket for Hyundai R80CR-9A . . . . . . . . . . . . . . . . . . . . . . . . . . .$750 JOHN DEERE COUPLER (6010735), For 310s/410 Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $795 JOHN DEERE COUPLER (6010736), For 310s/410 Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $795 2011 GEITH QH65M (5808421), Manual Coupler for Kobelco 140SR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,500 JOHN DEERE 92” MP BUCKET (6010733), For John Deere 310S/410 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2,000 2012 BRADCO FF72 (5805659), 72” Brush Grapple, Universal Skid Steer Coupler . . . . . . . . . . . . . . . . . . . . . . . . $2,900 2015 KUBOTA M SERIES TIRES (6010720), 2 AMR8532 rear tires, 2 AMR8993 front tires . . . . . . . . . . $3,950 2012 RANSOME GRAPPLE (5801820), 36” grapple bucket for Kobelco 170 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7,500 2010 CONTEQTEC AP600HD (5805264), Cold planer, 24” drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9,900 2010 KENT KF12QT (5808415), 2000 Lb Hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $15,000
For pictures and our complete inventory of new and used equipment visit www.HarterEquipment.com
2006 KOBELCO SK135SR LC (6008883), 5650 Hrs, Cab w/AC, Steel Tracks, 36” Bucket...... $39,500
! ! !
! ! ! !
Page 20 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 21
® BUY IT. SELL IT. WORK IT.
CAT
“I’ve been involved in the construction industry for forty years. During this time, I have built strong and lasting relationships which have in turn, resulted in great business partnerships.”
TOM ALFANO International & Domestic Used Equipment Sales & Purchasing
TALFANO@FOLEYINC.COM
WHETHER YOU WANT TO BUY OR SELL YOUR USED CAT EQUIPMENT, I’VE GOT A DEAL FOR YOU!
732-261-8430
855 CENTENNIAL AVENUE PISCATAWAY, NJ 08854
Page 22 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Komatsu Expands Barletta Wins AED Leadership Award Mining Business, Acquires Joy Global Komatsu America Corp., has completed its acquisition of Joy Global Inc., a worldwide leader in high-productivity mining solutions. Retaining its headquarters in Milwaukee, Wis., Joy Global Inc. will be renamed Komatsu Mining Corp. and operate as a subsidiary of Komatsu. The company will continue to promote and invest in the P&H, Joy and Montabert product brands. Komatsu remains committed to directly servicing the global mining industry and through its products, services and technologies is focused on helping customers improve productivity and safety in their operations worldwide. “The combination of our Komatsu-brand surface mining
“The combination of our Komatsu-brand surface mining equipment with the P&H Joy and Montabert brands of surface and underground products will allow us to offer a complete range of mining solutions for our customers.” Tetsuji Ohashi
Komatsu
equipment with the P&H, Joy and Montabert brands of surface and underground products will allow us to offer a complete range of mining solutions for our customers,” said Tetsuji Ohashi, president and CEO of Komatsu. “We plan to build on the strength of our shared cultures, including our unwavering belief in safety first and our passion for providing innovative solutions, to become an unrivaled mining solutions and services provider.” The close of the transaction adds to the Komatsu team more than 10,000 people with deep knowledge and experience in the mining industry, bringing the company’s global total to more than 57,000 employees. With a focus on providing uninterrupted and unrivaled service and products for its customers, Komatsu plans to leverage the best practices of both companies while aligning the organization and operation for optimal customer support. Komatsu Mining Corp. will be led by Jeffrey Dawes, formerly leader of Komatsu Latin America. Dawes and the management team will be based in Milwaukee, Wis. Following the close of the transaction — valued at approximately $3.7 billion, including Joy Global’s outstanding indebtedness — Joy Global shares will be delisted from the NYSE and will no longer be publicly traded. For more information, visit www.komatsu.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Associated Equipment Distributors (AED) presented Congressman Lou Barletta (R-Pa.) with its 2017 Legislative Leadership Award during a luncheon on Capitol Hill held in conjunction with the AED/Equipment Dealers Association 2017 Washington Fly-In. In his fourth term representing Pennsylvania’s eleventh congressional district, Barletta is a leader in Congress for robust infrastructure investment, lower taxes, eliminating unnecessary regulatory burdens and educating the next generation of skilled workers. Barletta is a member of the House Transportation & Infrastructure Committee, where he chairs the Subcommittee on Economic Development, Public Buildings & Emergency Management. He also serves on the House Education & the Workforce Committee and the House Homeland Security Committee. During the award presentation, AED’s President & CEO Brian McGuire said, “The construction equipment industry has no stronger
advocate in Congress than Lou Barletta. Whether it’s pushing for increased infrastructure investment, promoting lower taxes on our country’s small businesses, leading efforts to roll back burdensome regulations or seeking solutions to solve the nation’s skilled worker shortage, Congressman Barletta is always backing the interests of our industry and our country.” “As someone who grew up in the road construction industry before starting my own line-painting business, I am honored to receive this award,” Barletta said. “Our nation’s infrastructure is crumbling, and AED members supply the equipment that will help to rebuild it. But as I learned with my own company and as mayor of Hazleton, no small business or local government is going to hire workers, purchase million dollar pieces of equipment, and plan projects without long-term security in government contracts. I am committed to making sure that members of both parties come together to find a sustainable funding source for transportation infrastructure
investments. Doing so will allow businesses to create jobs, boost our economy, and make America globally competitive again.” Prior AED Legislative Leadership Award recipients include: • Rep. Thomas Petri (R-Wis.) (2004) • Rep. Don Young (R-Alaska) (2005) • Sen. Jim Inhofe (R-Okla.) (2006) • Rep. John Thune (R-S.D.) (2007) • Rep. James Oberstar (D-Min.) (2008) • Rep. Nydia Velazquez (D-N.Y.) (2009) • Rep. Earl Blumenauer (D-Ore.) (2010) • Rep. Steven LaTourette (R-Ohio) (2011) • Sen. Barbara Boxer (D-Cal.) and Sen. Jim Inhofe (R-Okl.) (2012) • Rep. Peter Roskam (R-Ill.) (2014) • Rep. Bill Shuster (R-Pa.) (2015) • Rep. Pat Tiberi (R-Ohio) (2016) (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
AGC Unveils Steps to Improve Safety The Associated General Contractors of America unveiled a new study designed to improve the safety of construction workers as it announced that two-thirds of metro areas added construction jobs during the past 12 months. Association officials said the new safety study is designed to help construction firms prevent workplace fatalities and injuries. “We all share a common goal: getting to zero construction fatalities,” said Stephen E. Sandherr, the association’s chief executive officer. “This report offers the kind of data and recommendations needed to help construction firms achieve that goal.” The association unveiled the safety report at a time when construction employment is expanding in many metro areas. A new analysis of construction employment data shows that 239 out of 358 metro areas added construction jobs between February 2016 and February 2017. He noted that RiversideSan Bernardino-Ontario, Calif. (9,000 jobs, 10 percent) added the most jobs while Grand Forks, N.D.-Minn. (37 percent, 1,000 jobs) added the highest percent of new jobs. Sandherr noted that the association worked with the Myers-Lawson School of Construction at Virginia Tech University to undertake the comprehensive study of every construction fatality that took place over a three-year period. He noted that the best way to help construction firms put in place the most effective safety measures is to understand why, when and how construction fatalities occur. Some of the findings in the report reinforce existing safety practices and many of the association’s long-standing safety programs, Sandherr noted. For example, falls from ladders and other structures account for one-third of U.S. construc-
tion fatalities. This confirms the association’s and industry’s longstanding focus on offering training and safety standdowns addressing fall protection. Sandherr added that the association is now also looking to establish new training programs designed to improve ladder safety. Some of the other findings, however, are contrary to a number of long-held industry safety assumptions, the construction official noted. For example, while prior research indicated most construction fatalities occur in the morning, in fact noon is the deadliest hour in construction. As a result, Sandherr said the association is now advising construction firms to look at holding safety talks and stretching sessions when workers return from the 11 a.m. to noon lunch breaks common on most job sites. The study also found that Hispanic construction workers are not disproportionately the victims of construction fatalities. As a group they account for 24 percent of the national construction workforce and 25 percent of all construction fatalities. Sandherr said this was important because it indicates that construction firms need to craft safety programs targeting their entire workforce, instead of specific segments. Sandherr added that the association was sending the new safety report to each of its members, as well as to other construction associations and also making it available online. “No wisdom or insight should be proprietary when it comes to the safety of construction workers,” Sandherr said. For more information, visit www.agc.org. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 23
ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004
724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees OFF ROAD HAULERS
COMPACTORS
CRANES
Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . . $15,500 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 IR SD100D Pro-Pac Vibratory Compactor, 1999, off work), work ready . . . . . . . . . . . . . . . . . . $127,500 Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom Hydrostatic trans 84" smooth drum, drum drive . . . . . Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, anti-two block, GM dsl, clean . . . . . . . . . . . . . $49,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $52,500 working everyday . . . . . . . . . . . . . . . . . . . . . $145,000 IR SD105DX, 2002, 84" drum drive, OROPS, very clean Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25,
AIR COMPRESSORS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $74,500 A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . . CALL IR SD105DX, 2002, 84" drum, OROPS, clean $69,500 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, SPECIALS IR SD150F, 84" Padfoot, 1998, OROPS . . . . . $49,500 P/S trans, tailgate, work ready . . . . . . . . . . . $115,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a towIR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, type, (4) MH lights, excellent . . . . . . . . . From $5,200 ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $62,500 approx 7,000 hrs, good condition . . . . . . . . $147,500 Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $68,000 P/S trans, working everyday on jobsites . . . . $87,500
BACKHOES
Case 580L Rubber Tire Loader Backhoe, 1997, Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . . $24,500 nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $205,000 P/S trans, 26 cy, working everyday on jobsites . . . . . . (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $89,000 DRILLS work ready . . . . . . . . . . . . . . . . . . . . . . From $79,500 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, John Henry Drill Mtd on Cat 320N, 1994, 24' mast, Rammax Walk Behind Rollers, over 25 in stock, lever 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . Duraquip dust collection . . . . . . . . . . . . . . . .$125,000 & remote . . . . . . . . . . . . . . . . . . . . $4,000 to $10,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $122,500 MISCELLANEOUS
(8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500
CRAWLER TRACTORS
(2) Balderson Broom Attachment for Cat IT Machines, (2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, 8' wide, good condition . . . . . . . . . . . . . . . $4,000 Ea. HYDRAULIC EXCAVATORS winches, v. good . . . . . . . . . . . . . . . . . . $175,000 Ea. NUMEROUS Rivinius R600’s, 10’ Wide, Mount on JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick cou- (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 pler, 6-7000 hrs, Fleet maintained . . . . . . . . . $29,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39,000 Ea. ATTACHMENTS
Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39,500
MOTOR SCRAPERS
Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Cat 613C Water Wagon, 1994, 5000 gal drop tank, Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $43,500 ROPS, spray heads . . . . . . . . . . . . . . . . . . . . . $49,500 (5)
Komatsu
PC128UU,
1996,
offset
boom, Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good
rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . . CALL condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CALL Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice coupler, plumbed, 8’6” width, nice, work ready . .CALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CALL Volvo EC460B LC, 2003, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing good con-
TRUCKS & TRAILERS
dition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$100,000 (2) 48' Box Vans w/Liftgates, Good Condition . . CALL
BUCKETS Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4,000 Others Available Call Prices Are Negotiable - At Your Inspection All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.
Page 24 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Westchester Tractor, Inc. 60 International Blvd • Brewster, NY 10509 RS NEW CHIPPE RS & GENERATO K NOW IN STOC
TLB’S:
1996 Komatsu PC40R-8, Steel Tracks, Mechanical Thumb, Cab w/Heat, 4896 Hrs, New 24” Bkt....
1986 Case 580E TLB, ROPS, Turf Tires, 12” Backhoe Bucket 4WD, 4786 Hrs.................... $12,995
.............................................................................................................................................. $19,995
SSL/CTLS:
2005 New Holland E80 Midi Excavator, 30” Hensley Bucket, Cab w/Heat/AC, Fully Serviced, 5600
2006 New Holland C190 CTL, Full Cab, Hydraulic Coupler, Hand Controls, 2586 Hrs........ $27,995
Hrs........................................................................................................................................ $39,995
1994 John Deere 5200, ROPS, 2wd, 2 Rear Remotes, Turf Tires, 3281 Hrs........................ $5,500 New Holland TS100A, SWD w/21’ Machette Flailax, Boom Model MB21 sn 02221, Flail Axe (Belt Driven), 48”, New replacement Head - MF48-01598, 1433 Hrs............................................ $69,000
EXCAVATORS: 1995 Cat 322L, Cab, 48” bucket, Geith Grapple, 20” Hendricks Bucket, 8948 Hours SOLD $27,995 2004 Cat 320C, Full Cab, with Heat/AC, 48” Bucket, 3418 hours........................................ $75,995 1988 John Deere 690D LC, Cab, Steel Tracks, 4470 Hrs.................................................... $18,000
1994 Cat 426B TLB
2006 Kobelco 115SR, Cab, Hydraulic Coupler, Manual Thumb, Plumbed, 4905 Hrs.......... $52,000 2005 Kobelco SK160, Full Cab, Wedge Lock Mechanical Coupler, 36” Bucket, 3721 Hrs....$72,995 2007 Kobelco SK30, Full Cab, 24” Bucket, Rubber Tracks, 888 Hrs.......................... SOLD $24,995 2013 Kobeloc SK260-9, Full Cab, Quick Coupler, 2660 Hrs.............................................. $149,900 2003 Kobelco ED190, Full Cab, 6 Way Blade, Thumb, 40” Bucket, Hydraulic Coupler, 5460 Hrs......
DOZERS: CHIPPERS/STUMP GRINDERS 2008 Bandit 150XP, 12HP Deere, Auto Clutch, 4065 Hrs, Auto Feed Not Working.............. $21,995 2000 Rayco RG50 Stump Grinder, New Revolution Cutter Wheel, 1449 Hrs, Trailer.......... $27,995 2007 Rayco RG90 Stump Grinder, with Trailer, Blade, 4WD, 3300 Hrs................................$16,500 2013 Rayco 1645SJRS Stump Grinder, 4 Cyl. Diesel, Trailer with Single Axle, 888 Hrs.................. .................................................................................................................................... SOLD $22,995
TRUCK: Ford F650, Cummins Diesel 225 HP, 605 FT LBS Torque, 26,000 GVW Pkg, 7 Speed Manual, A/C, 50 Gallon Fuel Tank,Power Windows and Locks, Rebuilt Transmission from Camarota 10,000 Mile Ago, Electric Brake Controller, Trailer Plug with 2" Receiver Hitch, Bobcat 250NT Welder, 37 CFM Self Contained Hydraulic Driven Air Compressor with 30 Gallon Tank, 1 Coxreel, 1/2"X50, 8,000 LB Hydraulic Crane, 70 Gallon Lube System, Graco Fireball 5:1 Pump, 2 Way Reversing Valve$42,995
WHEEL LOADERS: MISCELLANEOUS: 2007 Kubota 1100C RTV, Camo, Cab w/AC, Hydraulic Dump, 1550 Hrs.................... SOLD $9,995
Extra deep lugs for traction Tough rubber compounding
See dealer for financing details. CNH Capital America LLC standard terms and conditions apply. Subject to customer credit qualifications. CNH Capital America LLC reserves the right to cancel any program without notice.
Large in stock inventory Backhoe & loader solids also available
1997 New Holland 555E
2004 Daewoo MEGA200V, Full Cab, 4 in 1 Bucket, 1670 Hrs, ACS Coupler........................ $55,000
.................................................................................................................................... SOLD $69,995
Soft Ride Solid Skid Steer Tires
2006 New Holland C190 CTL
2006 New Holland D85, 1607 Hrs........................................................................................$39,995
2003 Kobelco SK115 SR DZ, Full Cab, 36” Bucket, 9300 Hrs..............................................$41,995
New Holland TS100A Tractor
Now Serv ing All of Connectic ut
LATE MODEL EQUIPMENT
TRACTORS: Ford F650 Truck
845/278-7766 Fax: 845/278-4431 E-mail: equip@wtractor.com
2012 New Holland T6030
Visit www.weaco.com to view our complete inventory 4009 Conrad Weiser Parkway • Womelsdorf, PA 19567 Phone: (610) 589-5555 • Fax: (610) 589-5350 • Email: sales@weaco.com
2012 Case SV300, 1330 Hrs, Heat, 2000 Stone SD66, 66” Drum, Good A/C, High-Flow, 2-Speed, Hyd Coupler...... 2003 Cat 953C, 9888 Hrs, Cab, Heat, ................................................ $28,500 A/C, Decent U/C...................... $49,500 Tires.......................................... $22,500 3 To Choose From!
2005 Komatsu D61PX-15, 6615 Hrs, 2000 New Holland EC130, 36” Bkt, 2006 Volvo A25D, 8852 Hrs, Heat, Heat, A/C, Exc. Undercarriage.. $59,000 Good Undercarriage.................. $27,500 A/C, Radio, Good Tires, 6x6
www.advancetires.com • (800) 445-6647 Mention this ad for discounted shipping
2004 Case 580SM+, 7333 Hrs, Heat, New 2017 EZ-2-Load 20ANR Tilt, Air Tilt, 20’ Deck, 6’ Beavertail, Led Lights, A/C, 4x4, E-Hoe, Ride Ctrl, New Tires, 2006 Hamm 3412, 5498 Hrs, 84” Pilot Controls............................ $32,500 Warranty.......................... $22,500+FET Drum, Excellent Tires................ $37,000
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 25
Pine Bush Equipment Training Center Heavy Equipment Beginners’ Class 3 Days April 19th, 20th & 21st 8am - 3pm
Learn Basic Operation and Safety Practices Held at Pine Bush Equipment 97 Route 302 Pine Bush, NY 12566 Opportunity is knocking—sa save on Kubota’s versatile SVLL Series compact track loaders ers today!
For more info and to Register: Contact Lee Drake 845-399-5750 or email: Ldrake@pbeinc.com
$
0 Down, 0% Financing for 48 Months
*
A.P.R.
Offfer ends 6/30/17.
*$0 down, 0% A.P A P.R. financing for up to 48 months on purchases chases of new Kubota SVL Series equipment is available a to qualified purchasers from m participating dealers’ in-stock inventory through rough 6/30/2017. Example: A 48-month monthl onthly installment repayment term at 0% A.P.R. requires 48 payments of $20.83 per $1,000 000 financed. 0% A.PP.R. .R. interest is available to customers if no dealer documentation preparation fee is charged. Dealer charge foor document preparation fee shall be in accordance rdance with sta state laws. Inclusion of inelligible equipment may result in a higher blended ded A.P.R. 0% A.P.R. and low-rate financing ma may not be available with customer instant nt rebate reba offers. Financing is available througgh Kubota Credit Corporation, U.S.A., 1000 Kubota K Drive, Grapevine, TX 76051; subjectt to credit approval. a Some exceptions apply. Offer O expires 6/30/2017. See us for details on these and other low-rate low-ra options or go too www.kubota.com for more information. Opttional equipment may be shown.
kubota.com k
© Kubota Tractor Tractor tor Corpora Corporation, 2017
SALES • RENTALS • PARTS • SERVICE • TRAINING
www.pbeinc.com
Pine Bush Equipment Co, Inc.
Holmes, NY Branch
East PBE, Inc.
97 Route 302 Pine Bush, NY 12566
24 Sybil Court Holmes, NY 12531
283 Pane Road Newington, CT
Phone: (845) 744-2006 Call Karie (ext 1230)
Phone: (845) 878-4004 Call Damien (ext 2215)
Phone: (860) 665-7470 Call Lisa (ext 9232)
Our Holmes, NY Branch is a NAPA Auto Parts Location
Page 26 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
2012 CAT 329EL HYDRAULIC EXCAVATOR, ID# UT13727, 5695 hrs, CAB, A/C, REAR VIEW CAMERA, JOYSTICK CONTROL W/ THUMB ROLL, AUX HYDRAULICS, PATTERN CHANGER, SYSTEM COMBINE, BUCKET, HYDRAULIC THUMB, LINES FOR HYD COUPLER, 32IN TG SHOES....................................................$175,000
2008 CAT 328DLCR HYD EXCAVATOR, ID# UP15698, 4265 hrs, CAB, AIR CONDITIONING, COLD WEATHER START, PATTERN CHANGER, 10FT 6IN STICK, CB2 LINKAGE, MECHANICAL GRAPPLE, 24IN TG TRACKS................ $197,000
1995 HITACHI EX1800-2, ID# UT15802, 52826 hrs, HYD FRONT SHOVEL, CAB, A/C, KTA19C ENGINES, (2) 13.5 CYD BUCKETS, 32IN TRACKS, UC 65-70%, FRONT ENGINE REBUILT 812HRS AGO, REAR ENGINE REBUILT 6692HRS AGO, SPARE PARTS INCLUDED - CALL FOR MORE INFO.... $95,000
2013 CAT 305E CR MINI HYD EXCAVATOR, ID# UT15630, 699 hrs, CAB, AIR CONDITIONING, PATTERN CHANGER, AUX HYDRAULICS, COMPACT RADIUS SWING, 1PC SWING BOOM, 5FT 1IN STICK, MANUAL COUPLER, BUCKET, MECHANICAL THUMB, 6FT 8IN BACKFILL BLADE, 16IN RUBBER TRACKS............ $65,000
2013 CAT D6K XL TRACK-TYPE TRACTOR, ID# UT15686, 2258 hrs, EROPS, AIR CONDITIONING, JOYSTICK STEERING, PAT BLADE, PA50 WINCH W/ FAIRLEAD, SWEEPS, SYSTEM ONE UC, 22IN TRACKS.................................. $129,000
CAT D6N XL TRACK-TYPE TRACTOR, ID# UT14845, 13,918 HRS, TIER II 3126 ENGINE, EROPS, A/C, DIFF STEERING, PAT BLADE, DRAWBAR................................................ $68,000
2013 CAT D6T XL TRACK-TYPE TRACTOR; ID# UP15320, 3729 hrs, EROPS, AIR CONDITIONING; SWEEPS; SU BLADE; MS RIPPER; 24IN TRACKS..................................................$235,000
2006 CAT D10T TRACK TYPE TRACTOR, ID# UP12076, 10331 hrs, TIER II C27 ENGINE, EROPS, AIR CONDITIONING, FINGER TIP STEERING, FAST FUEL SYSTEM, FAST OIL CHANGE, 28IN SHOES........................ $790,000
2003 CAT 963C LGP TRACK TYPE LOADER, ID# UP15594, 12262 hrs, CAB, AIR CONDITIONING, TWO LEVER BUCKET CONTROL, GP BUCKET, 22IN TRACKS.......................................... $65,000
2013 CAT 287C MULTI-TERRAIN LOADER; ID# UT15837, 700 hrs, CAB, AIR CONDITIONING; ELEC CONTROL FOR IMPLEMENTS; 2-SPEED TRAVEL; LOW FLOW HYDRAULICS; PROPORTIONAL HYDRAULICS; HYDRAULIC QUICK COUPLER; BUCKET; 18IN RUBBER TRACKS.... .................................................................. $50,000
2006 CAT CS563E SMOOTH DRUM COMPACTOR, ID# UP15622, 2312 hrs, CAB, AIR CONDITIONING, 84IN VIBRATORY SMOOTH DRUM, 23.1-26 TIRES..............................$79,000
2002 CAT CS563D VIB SOIL COMPACTOR, ID# UP15685, 3970 hrs, CANOPY, 84IN SINGLE VIBRATORY DRUM, 23.1X26 TIRES...... $59,000
2013 CAT 908H COMPACT WHEEL LOADER, ID# UP15822, 1821 hrs, CAB, AIR CONDITIONING, JOYSTICK, HORIZONTAL NON-SSL STYLE COUPLER, MP BUCKET, 405/70 R20 TIRES...... .................................................................. $72,000
2007 CAT 257B MULTI-TERRAIN LOADER, ID# UT15257, 3488 HRS, TIER II ENGINE, CAB, AIR CONDITIONING, 1-SPEED TRAVEL, STANDARD FLOW PROPORTIONAL HYD'S, HYD QUICK COUPLER, SELF-LEVELING, 15IN RUBBER TRACKS....................................................$25,000
2006 CAT 950H WHEEL LOADER; ID# UP15005, 11621 hrs, EROPS, AIR CONDITIONING; RETARDER; 3-VALVE RIDE CONTROL; HYD HORIZ PIN QUICK COUPLER; GP BUCKET; 23.5R25 TIRES - ALL RETREADS........ $121,000
2000 CAT 236 SKID STEER LOADER; ID# UT15637, 4041 hrs, CANOPY; 1-SPEED TRAVEL; MANUAL COUPLER; FORKS; 12-16.5 10PLY TIRES........................................................$16,000
2004 CAT TH560B TELEHANDLER, ID# UT15538, 9439 hrs, TIER II ENGINE, CAB, AIR CONDITIONING, AUXILIARY HYDRAULICS, 4 WHEEL DRIVE, 3 PIECE BOOM, THUMB HYDRAULIC CONTROL, THUMB SLIDE, COUPLER ROTATE, TILT WHEEL.......... $37,000
RE PR DU ICE CE D
2012 VOLVO A40F ARTICULATED TRUCK, ID# UT14568, 3570 HRS CAB, AIR CONDITIONING, 6X6, ENGINE BRAKE, TAILGATE, YOKOHAMA TIRES @ 3474HRS, RF 80%, LF 82%, RR 83%, RR2 82%, LR 83%, LR2 83%................................ .............................................. $330,000 $285,000
RE PR DU ICE CE D
2005 CAT 735 ARTICULATED WATER WAGON, ID# UP13431, TIER II 3406 ENGINE, CAB, AIR CONDITIONING, 6X6, TIRES @ 9307HRS: RF 59%, LF 34%, RR1 14%, RR2 28%, LR1 14%, LR2 28%, 7000GAL CURRY WATER TANK, 9307 HRS...................................... $255,000 $225,000
2006 CAT 777F OFF-HIGHWAY TRUCK, ID# UT14414, 11274 hrs, TIER II C32-758KW ENGINE, CAB, AIR CONDITIONING, AIR RIDE SEAT, HEATED MIRRORS, 4X6, RETARDER, ENGINE HEATER, ARC WITH TRACTION CONTROL, TRUCK PRODUCT MANAGEMENT SYSTEM, DUAL-SLOPE BODY, LINER, HEAT, FRONT WET BRAKES, 2700-R49 TIRES.......... $725,000
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 27
USED
THE BEST VAL ALUE AND BE EST SELECTION OF CAT® PA ARTS & CO OMPONENTTS
PAR ARTS TRACK 259D, Like new Stock # 3570232/75587
CLEVELAND BR ROTHERS PROVIDES ALL YOUR Y USED PARTS AND EQUIPMENT QUIPMENT NEEDS
Engine 773B, good running take out Stock # 1037416/74539
CATERPILLAR IT28G, Arm, Used, 1133727/73616 CATERPILLAR 980G, 980H, Arm, Used, 1157044/68123 CATERPILLAR 980H, Arm, Used, 1756352/75003 CATERPILLAR 930G, Arm, Used, 2357301/67960 CATERPILLAR 988F I, 988F II, Arm, Used, 4E7522/63584 CATERPILLAR 980G, Axle, Used, 1079680/71963 CATERPILLAR 980G Axle, Used, 1080060/68119 CATERPILLAR 988H, Axle, Used, 1378832/68732 CATERPILLAR 950G, 962G, IT62G, Axle, Used, 1383121/35700 CATERPILLAR 420D, Axle, Used, 1545471/73330 CATERPILLAR 980H, Axle, Rebuilt, 2327558/34667 CATERPILLAR 930G, Axle, Used, 2677380/71827 CATERPILLAR D5K, XL Blade, 6-Way, Used, 3974170/75825 CATERPILLAR 257, 257B, 257B2, 257B3, 257D, Blade, Angle, Used, 2315275/61395 CATERPILLAR D6T LGP, Blade, Angle, Used, 2940812/72076 CATERPILLAR D6T, XW Blade, Angle, Used, 3341764/58556 CATERPILLAR D6T, XL Blade, Angle, Used, 3527618/66974 CATERPILLAR D6N, Blade, Angle, Used, 3593410/56510 CATERPILLAR CS-573,E Blade, Other, New, 2238997/65870 CATERPILLAR 314D LCR, Blade, Other, Used, 2824578/62303 CATERPILLAR 314, Blade, Other, Used, 3387943/51608 CATERPILLAR D9L, Blade, U, Rebuilt, 9J7420/42578 CATERPILLAR 345B, Booms, Used, 1271409/71069 CATERPILLAR 420D, Booms, Used, 1839140/73275 CATERPILLAR 988G, 988G II, 988H, Booms, Used, 2318178/75933 CATERPILLAR 325D, Booms, Used, 2343799/50540 CATERPILLAR 303.5C, Booms, Used, 2811107/69549 CATERPILLAR 311, 312, Booms, Used, 5I3412/54544 CATERPILLAR 305.5, 305.5D CR, Bucket, Ditch Cleaning, Used, 700068060/60885 CATERPILLAR 345B, Bucket, GP, Used, 1458066/68565 CATERPILLAR 420F, Bucket, GP, Used, 3377388/51594 CATERPILLAR 324D, 324E, 326FL, 328D LCR, 329DL, 329E, 329FL, Bucket, Other, New, BU3843 CATERPILLAR 324D, 324E, 326FL, 328D LCR, 329D, 329EL, 329FL, Bucket, Other, Used, BU8344 CATERPILLAR 216, 216B, 216B2, 216B3, 226, 226B, 226B2, 226B3, 228, 232, 232B, 232B2, 232B3, 236, 236B, 236B2, 236B3, 236D, 242, 242B, 242B2, 242B3, 242D, 246, 246B, 246C, 246D, 247, 247B, 247B2, 247B3, 248, 248B, 252, 252B, 252B2, 252B3, 256, 256C, 257, 257B, 257B2, 257B3, 257D, 259D, 259B, 259B3, 262, 262B, Bucket, Other, New, THSB/56740 CATERPILLAR 992C, 992D, Bucket, Rock, Used, 5V5601/60577 CATERPILLAR 988B, 988F, Bucket, Rock, Used, 9V0219/60984 CATERPILLAR 980G, Cab, EROPS, Used, 1097922/47687 CATERPILLAR 980G, Cab, EROPS, Used, 1097922/65276 CATERPILLAR D9R, D10R, D11R, Cab, EROPS, Used, 1118549/50331 CATERPILLAR D8R, Cab, EROPS, Used, 1196724/71447 CATERPILLAR 325B, 325BL, 325BLN, 330B, 330BL, 330BL LR, 330BLN, 345B, 345B II, 345B LC, 345BL, 345BL II, Cab, EROPS, Used, 1276516/75461 CATERPILLAR 988G, Cab, EROPS, New, 1289664/29291 CATERPILLAR 325B, 325BL, 325BLN, 345B, 345BL, Cab, EROPS, Used, 1516714/69568 CATERPILLAR D6T, Cab, EROPS, Used, 1587696/7279 CATERPILLAR 777D, Cab, EROPS, Used, 1674447/74762 CATERPILLAR 930G, Cab, EROPS, Used, 2356906/67959 CATERPILLAR D6N, Cab, EROPS, Used, 2704810/76700 CATERPILLAR 992C, 992D, Cab, EROPS, Used, 2V5075/46948 CATERPILLAR D10, Cab, EROPS, Used, 3T8106/36149 CATERPILLAR D350E, Cab, EROPS, Used, 7U4400/40232 CATERPILLAR 992C, 992D, 690B, Cab, EROPS, Used, 9V5306/30599 CATERPILLAR D6T XW, C-Frame, Used, 3341767/66973
Engine 345B, Good running take out Stock # 1260054/73015
CATERPILLAR 980G, Counterweight, Used, 1146030/65810 CATERPILLAR D6T Counterweight, Used, 1Q4324 CATERPILLAR D5K2, D3K, D3K LGP, D3K XL, D3K2, D4K2, Counterweight, Used, 2568796/76136 CATERPILLAR 314D LCR, Counterweight, Used, 3374888/62291 CATERPILLAR D10R, Counterweight, Used, 6T3584/62617 CATERPILLAR D8R, D8R II, D8R LGP, D8R LGP II, D8T, D8T LGP, Counterweight, Used, 6Y0610/74832 CATERPILLAR 928HZ, 930G, 930H, Coupler / Quick Coupler, Used, 2357451/55382 CATERPILLAR 323E, 324E, 326DL, Coupler / Quick Coupler, Used, 2924162/70414 CATERPILLAR 924K, Coupler / Quick Coupler, Used, 3336550/58732 CATERPILLAR 924K, Coupler / Quick Coupler, Used, 3336551/69041 CATERPILLAR 305CR, 305D CR, 305E CR, 305E2 CR, 305.5, Coupler / Quick Coupler, New, 3611097/76152 CATERPILLAR 5230, 5230B, 5230B FS, Cylinder, Boom/Lift, Used, 1393788/72191 CATERPILLAR 836C, Differential, Rebuilt, 1367631/55993 CATERPILLAR 988H, Differential, Rebuilt, 1378851/56074 CATERPILLAR 740, Differential, Used, 1540300/37138 CATERPILLAR 824C, Differential, Used, 3V4030/31079 CATERPILLAR 988F, I Differential, Used, 4E1989/43628 CATERPILLAR 988F, Differential, Used, 4E1990 CATERPILLAR 824C, Differential, Used, 4V1073/31078 CATERPILLAR 992C, 992D, Differential, Used, 6W7420/59790 CATERPILLAR D11R, Engine, Used, 1008111/62564 CATERPILLAR D10N, Engine, Rebuilt, 1056574/55963 CATERPILLAR 962G, Engine, Rebuilt, 1168671/34551 CATERPILLAR 773D, Engine, Used, 1230198/65632 CATERPILLAR 769D, Engine, Rebuilt, 1230206/32272 CATERPILLAR 345B, Engine, Used, 1260054/73015 CATERPILLAR 325BL, Engine, Used, 1313803/75400 CATERPILLAR 345B, Engine, Used, 1382001/37356 CATERPILLAR 988F II, Engine, Used, 1430029/63717 CATERPILLAR 836C, Engine, Used, 1438336/62237 CATERPILLAR 420D, Engine, Used, 1878014/73406 CATERPILLAR 315C, Engine, Used, 1981441/72823 CATERPILLAR 980G II, Engine, Used, 2027585/70753 CATERPILLAR D8R, Engine, Rebuilt, 2225432/69920 CATERPILLAR 980H, Engine, Rebuilt, 2250992/55693 CATERPILLAR 330D, 330DL, Engine, Rebuilt, 2401861/68290 CATERPILLAR D6N LGP, Engine, Used, 2421399/76431 CATERPILLAR D6H, D6H II, Engine, Rebuilt, 7C0501/65537 CATERPILLAR 777C, Engine, Rebuilt, 7E9078/36720 CATERPILLAR D7H, Equalizer, Bars Rebuilt, 1414690/28344 CATERPILLAR D6R, Equalizer, Bars Core 2012078/38992 CATERPILLAR D11N, Equalizer, Bars Rebuilt, 2072683 CATERPILLAR D11R, Equalizer, Bars Rebuilt, 2072684 CATERPILLAR 307E2, Final Drive, New, 1026548/70872 CATERPILLAR 322B, 322B LC, 322B LR, 322BL, 322BL LR, 322BLN, Final Drive, Rebuilt, 1141488/61170 CATERPILLAR 345B, Final Drive, Rebuilt, 1362847 CATERPILLAR 773D, Final Drive, Rebuilt, 1376821/66627 CATERPILLAR D8N, D8R, D8T, Final Drive, Used, 1575072/62601 CATERPILLAR 980G, Final Drive, Rebuilt, 1605585/8037 CATERPILLAR D11R, D11T, Final Drive, Rebuilt, 3242343/46124 CATERPILLAR D11R, D11T, Final Drive, Rebuilt, 3242343/59220 CATERPILLAR 980K, 980M, Final Drive, New, 3715138 CATERPILLAR 988F, 988F I, Final Drive, Used, 4E2664/43974 CATERPILLAR D6H, Final Drive, Rebuilt, 7G5532/73228 CATERPILLAR 311, Hydraulic,s Rebuilt, 4I7603/54757
Track group D5KXL, good used Stock # 2869245/76051
CATERPILLAR 5130, Other, Used, 1072940/326 CATERPILLAR D10R, Other, Used, 1157395/44976 CATERPILLAR 5130, Other, Used, 1554102/32845 CATERPILLAR AP-1000E, AP-1055E, Other, New, 2518303/53371 CATERPILLAR D6R LGP, Other, Rebuilt, 8E5273/38926 CATERPILLAR D6T, D6T LGP, D6T LGP VP, D6T LGP WDA, D6T XL, D6T XL DS, D6T XLVP, D6T XW, D6T XW LGP, D6T XWVP, Ripper, Used, 3871087/65643 CATERPILLAR 330B, 330BL, Swing Drive, Rebuilt, 1141305/32317 CATERPILLAR 385, 385B, 385B ME, 385BL, 385BL LR, 385BL ME, 385BL UHD, 385C, 385C FS, 385C LRE, 385C ME, 385CL, 385CL LR, 390DL, Swing Drive, Rebuilt, 1484626/57063 CATERPILLAR 311, Swing Drive, Used, 7I7761/57080 CATERPILLAR D10R, Torque Converters, Rebuilt, 1102769/35220 CATERPILLAR D8R, Torque Converters, Core 1103391/71477 CATERPILLAR D11T, Torque Converters, Core 1210028/59566 CATERPILLAR D11R, Torque Converters, Used, 1210030/47691 CATERPILLAR 988H, Torque Converters, Rebuilt, 1285303/52676 CATERPILLAR 824B, 836, 836C, Torque Converters, Rebuilt, 1431234/56095 CATERPILLAR 970F, Torque Converters, New, 1463329/43970 CATERPILLAR D8R II, Torque Converters, Rebuilt, 1613306/65016 CATERPILLAR D6N LGP, Torque Converters, Rebuilt, 1880502/44386 CATERPILLAR D10R, Torque Converters, Rebuilt, 2267609/64986 CATERPILLAR D6T, Torque Converters, Rebuilt, 2697635/72219 CATERPILLAR D10L, D10, Torque Converters, Rebuilt, 6P6412/31183 CATERPILLAR 773B, Torque Converters, Used, 6T4674/42945 CATERPILLAR 988F, Torque Converters, Rebuilt, 8E7009/64425 CATERPILLAR 776B, 776D, 777C, 777D, Torque Converters, Rebuilt, 8E8999/7415 CATERPILLAR 776B, 776D, 777C, 777D, Torque Converters, Used, 8E8999/74569 CATERPILLAR D11R, D11T, Track Frame, Rebuilt, 1380756 & 1380577 CATERPILLAR D8R, D8R II, D8T, Track Frame, Used, 1753632 & 1753633 CATERPILLAR D6T LGP, Track Frame, Used, 2393231 & 2393232 CATERPILLAR D11N, Track Frame, Used, 6Y2686 & 6Y2687 CATERPILLAR D11, D11N, Track Frame, Rebuilt, 6Y2686/54865 CATERPILLAR D11, D11N, Track Frame, Rebuilt, 6Y2687/54866 CATERPILLAR D8R, D8R II, Track Frame, Rebuilt, 9W6491 & 9W6492 CATERPILLAR 980G, Transmissions, Used, 1066452/68237 CATERPILLAR IT28G, Transmissions, Used, 1164860/74079 CATERPILLAR 980G II, Transmissions, Rebuilt, 1167684/71797 CATERPILLAR D350E, Transmissions, Rebuilt, 123755/70296 CATERPILLAR 924G, Transmissions, Rebuilt, 1402772/57646 CATERPILLAR 988G, Transmissions, Rebuilt, 1922914/66703 CATERPILLAR 930G, 938G, Transmissions, Used, 2348866/32134 CATERPILLAR 992C, 992D, Transmissions, Rebuilt, 3P9241/59831 CATERPILLAR 988F, Transmissions, Used, 6Y6719/64339 CATERPILLAR D11N, Transmissions, Rebuilt, 7T8168/56623 CATERPILLAR 776B, 777C, 777D, Transmissions, Used, 8E9035 CATERPILLAR 16, Transmissions, Used, 9M8300/42387 CATERPILLAR 988B, Transmissions, Rebuilt, 9W0782/32318 CATERPILLAR D5H, Winch, Used, 08929/51595 CATERPILLAR D6T, Winch, Used, 09056/71087 CATERPILLAR D6R XW III, D6T, D6T LGP, D6T LGP VP, D6T LGP VPAT, D6T LGP WDA, D6T XL, D6T XL DS, D6T XLVP, D6T XW, D6T XW LGP, D6T XWVP, Winch, Used, 2827492/72873
WWW.CLEVELANDBROTHERS.COM USED PARTS - 1.855.545.0267 ext. 2
Page 28 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
JCB North America Names Fox-Marrs President, CEO JCB has announced the appointment of Richard Fox-Marrs as president and CEO of JCB Inc., responsible for JCB operations in North America, including sales and support for the construction, agricultural, rental, government and defense industries. Additionally, Fox-Marrs is responsible for production at JCB North America’s Savannah headquarters, where the company manufactures the 3CX backhoe loader, skid steer and compact track loaders, along with the military specific High Mobility Engineer Excavator and Light Capability Rough Terrain Forklift. Fox-Marrs’ appointment is effective immediately. “As JCB’s senior executive in North America, Richard Fox-Marrs will further our position as a global leader in technical innovation, product quality and customer service, and accelerate our strong business performance and growth across all business sectors,” said Graeme Macdonald, JCB chief executive officer. Fox-Marrs is a 26-year veteran of JCB. Prior to his current appointment, Fox-Marrs
served as JCB North America’s president of agriculture. His previous positions included managing director of the Loadall telescopic handler business unit and managing director of JCB’s global agricultural division. FoxMarrs work in the North American market dates back to 2001 when he was responsible for establishing JCB Agriculture in North America. Fox-Marrs currently serves on the board of the Association of Equipment Manufacturers (AEM) and has served on the Farm Equipment Council in the UK and was chairman of the Agricultural Engineers Association (AEA) Farm Equipment Council in 2013-2014. He also served as a board member for AEA and represented the UK on the European Committee of Agricultural Machinery Manufacturers Associations Board. For more information, visit www.jcb.com. JCB has announced the appointment of Richard Fox-Marrs as president and CEO (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
of JCB Inc., responsible for JCB operations in North America, including sales and support for the construction, agricultural, rental, government and defense industries.
Townsend’s Inlet Bridge Closes Indefinitely for Repairs Cape May County Engineer Dale Foster reported, “Until further notice, the Townsend's Inlet Bridge between Avalon and Sea Isle City is closed to traffic due to the findings of an underwater inspection performed April 3. The dive team from Churchill Consulting Engineers, Berlin, N.J., discovered a crack and movement in one pile, that are very recent in nature, and severe deterioration in another pile of a three-pile cluster supporting one of the piers on the Avalon side of the bridge. This places the pier in an unstable condition to support loads.” According to a release, the three-pile cluster, consisting of steel H-piles were installed in the summer of 1962 to provide supplemental support at each end of four piers. The supplemental supports were needed due to the drop in the inlet bottom during the 1962 nor’easter. The pile clusters at the other three piers do not exhibit the severity of the defects that were found on Pier 6. “Unfortunately, the bridge will be closed for an indefinite period of time because of the equipment and materials needed to make the repairs and the conditions in which the contractor will be working. The defects in the two piles are located approximately 20 feet below the water. The water depth about
“Unfortunately, the bridge will be closed for an indefinite period of time because of the equipment and materials needed to make the repairs and the conditions in which the contractor will be working.” Dale Foster
Cape May County
Townsend’s Inlet bridge
this pier is approximately 50 feet,” Foster added. At the Feb. 14, Cape May County Board of Chosen Freeholders meeting, freeholders engaged Greenman-Pedersen Inc., Lebanon, N.J. with a local office in Ocean View, to design and prepare contract documents for underwater repairs to the Townsend's Inlet Bridge, that are anticipated to be performed in the 2017-18 winter season. This underwater inspection was being performed to gather information for this planned repair contract. As part of the federal requirements, the Townsend’s Inlet Bridge undergoes a reevaluation survey of the entire structure every two years; this also involves an underwater inspection of the bridge. The most recent biennial inspection of the bridge began in October 2015. Following up on the findings of the inspection, the County initiated a program to address defects noted in the underwater inspection report by establishing funding in a bond and soliciting a consultant to perform the design. The next re-evaluation survey of the bridge is scheduled to begin October 2017. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 29
DO MORE, MORE, FA AS STER TER W WITH ITH
Right Rig ht now gett
0% %48 APR 4 MOS. *
financing for up to
on select new Bobcat® equipment
IN LIEU OF FINANCING,, RECEIVE
REB BA ATES TES UP TO
The New Bobcat® E35 Compact Excavato a or
The New Bobcat® T590 Compacct Track Loader
The New Bobcat® S590 Skid-Steer Loader er
4 000
$ ,
*
AUTHORIZED BOBC B AT DEALERS: ALLENTOWN • HARRISBURG • MECHANICSBURG • MUNCY • PHILADELPHIA DELPHIA • SHIPPENSBURG • STA STATTE C COLLEGE • TOWA ANDA • WEST CHESTER
1-800-679-BEST (2 2378) • BestLine.com • BestLineBobcat.com m • Find Us On: *Offer ends 5/31/2017. Available at participaating ting and eligibl eligiblee dealers only. Offer may vary by product type, series, model and select ect units in dealer inventory. Offers available on new equipment in US and Canada only. Some restrictions apply. Length of contract may vary. Prior purchases not eligible. See dealer for details. Financing provided on approval of credit by authorized Bobcat finance providers too well-qualified buyers. Administraative tive fees may apply. Offer not available ble to government accounts, naational tional accounts and municipal/utility bid id customers. Non-commercial customers may not be eligible for low raate te financing. Bobcaatt Company reserves the right to extend or discontinue any of these programs at at any time without prior notice. Bobbcaat®, t®, the Bobcat at logo and the colors of the Bobcaatt machine are registered stered trademarks of Bobcaatt Company in the United Staates tes and variouss other countries. Photos may not represent actual units. Dealer not responsible esponsible for typographical errors. 17BLBX-NHC-CEG041917
2005 Kawasaki 80ZV, Serial# 80C4-5218, Engine - Cummins 6CCTAA8.3, 15,752 Hrs.............. $45,000
2004 Cat 980G, 3406 Engine, Serial# AWH0255.................................... $79,900
(3) 2000 Oshkosh Front Discharge Mixers, Model: FCM-7133, Engine: Mack E-7 375HP, Trans: Allison HD-4560..................................$64,500 (2) 2000 Oshkosh Front Discharge Mixers w/Trainer Cab, Model: FCM-7133, Engine: Mack E-7 375HP, Trans: Allison HD-4560.......... $67,500 (5) 2002 Oshkosh Front Discharge Mixers w/Trainer Cab, Model: FCM-7133, Engine: Mack E-7 375HP, Trans: Allison HD-4560.......... $72,500 (4) 2003 Oshkosh Front Discharge Mixers, Model: S-2346, Engine: Cummins ISM 350HP, Trans: Allison HD-4560.............................. $74,500 (13) 2003 Oshkosh Front Discharge Mixers, Model: FCM-7133, Engine: Mack E-7 375HP, Trans: Allison HD-4560................................$76,500 (2) 2006 MACK Granite CV713 Dump Truck, Model: Granite CV713, Engine: AI427 A SET, Trans: Transmission Assembly T318L 18 Speed, Rear: Rear Axles Carrier Arrgt CRD93 4.17R – 46,000lb, Front Axle: Model FXL 18, Electronics: VMAC III............................................ $64,500
Silvi Group Companies Fairless Hills, Pennsylvania
Tim Kurz 267-566-1802 • tkurz@silvi.com
www.silvi.com
Page 30 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Site Sim Proves a Little Gem for New York Garnet Mine Just a few hours’ drive north of New York City, the Adirondack Mountains offer a tranquil respite for those looking to escape the hustle and bustle of the Big Apple. The outdoor life is also good for business. Working in the Adirondack Mountains is Barton International, a family-owned business that has produced the world’s highest-quality garnet abrasives for more than 130 years. Established in 1878 by Henry Hudson Barton, the company started out harvesting garnet, a mineral known for its hardness and sharp edges. Barton’s fascination with the dark red gemstone first glittered while working at a jewelry store. At the time, there was a need for a better abrasive for sandpaper. Garnet is a naturally inert sharp crystal with a hardness that falls between 7.5 and 8.5 on the Mohs scale — not far from diamonds, which rank as a 10 — making it the perfect abrasive for woodworking applications. “My great-great-grandfather reflected on his experience with garnet and soon, he began his career mining and milling garnet for the sandpaper industry,” said Chuck Barton, chief operating officer. A Jewel of Sandpapers Barton said his ancestor researched and discovered a good garnet source in the Adirondack Mountains, in New York State. “He ended up buying an entire mountain,” he added. The original mine operated for 104 years before it was moved to Ruby Mountain in 1982, where the company still operates. Seven generations later, Barton still provides high-quality Adirondack garnet to sandpaper manufacturers for the discerning woodworking craftsman. Barton said he’s grateful to his great-great-grandfather for starting the family business and wants to honor his memory by passing on a thriving company to the next generation. “There’s special pride in being part of the business,” Barton saids. “There’s also an enormous responsibility to make sure that the business grows as the family grows.”
The Cutting-Edge But mining the mineral has not been without its challenges. In the early years, operations were limited to the warmer months, although collecting and workers on horses, wagons and winter sleighs carried out transporting the ore for processing year-round during the snowy Adirondack winters. Miners worked with picks, shovels and dynamite. “They used to do hand drilling, load the holes with dynamite, light the fuse — and run,” said Barton. “Now, it’s much more sophisticated. We have 3D models to better understand the deposit and efficiently access the garnet,” added Barton, noting the influence of Volvo Site Simulation on the growth of his fleet and business. The Volvo A40G FS articulated hauler combines unshakable stability and superb operator comfort to deliver unbeatable off-road performance.
A Volvo excavator and articulated hauler work together on the Barton mine.
Creating a Virtual Site Using Volvo Site Simulation, Barton and his team worked closely with Eric Yeomans, Volvo CE product manager, to build a highly detailed, computer-assisted report and simulation. “The simulation was quite complex because it included four different haul roads with different road surfaces, grades, angles, curves and even potholes,” said Yeomans. “We used GPS to accurately capture the haul road information.” Site-specific information,
including speed limitations, work schedules, density of the materials were also considered. After analyzing the data, Kevin Fish, Barton’s quarry manager said he was happy to recommend Volvo machines. “It helped show how we could improve with the new Volvo equipment in today’s operating environment, and also where we could go in the future,” Fish said. The company now operates a fleet of machines from Volvo to see MINE page 40
Chuck Barton, chief operating officer of Barton Mine, stands proudly on site.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 31
Page 32 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Modernization Under Way...
MLK Jr. Memorial Library Closes for $208M Renovation
THIS IS WHY You call Milton CAT when you need to rent a generator: • Availability. Even when everyone else needs a generator, you’ll get yours. • Product quality. All EPA-certified, clean, well-serviced gensets. • Complete range. From 20 to 2,000 kW; Diesel and gas; portable and Tier IV models. • All the ancillaries. • Expert support; 7/24 service. • Priced to fit your budget. Generators, Compressors, Chillers, Light Towers
800-821-6412 Serving MA, RI, NH, ME, VT and Upstate NY.
www.miltoncat.com
Construction on the Martin Luther King Jr. Memorial Library will start in Summer 2017 and continue until 2020.
On March 4, Richard Reyes-Gavilan, DC Public Library executive director, announced that the Martin Luther King Jr. Memorial Library, D.C.’s central library, will close for a complete modernization. ReyesGavilan also released final renderings and floor plans for the modernized Martin Luther King Jr. Memorial Library. Construction on the Martin Luther King Jr. Memorial Library will start in Summer 2017 and continue until 2020. When the $208 million transformation is complete, the Library will become the center of activity for the already vibrant downtown area. The building will feature a new, inspiring and transparent entryway; sculptured monumental stairs; large auditorium and conference center; creative spaces for fabrication, music production and art creation; ground level café with patio; double-height reading room; large, interactive children’s space; expanded special collections space for researchers and local history enthusiasts, and a rooftop event space with terrace. Public art will be solicited for the reading room, the vestibule and the plaza in front of the building. The art installations in the vestibule and the plaza will honor Dr. King. As the Library prepares for construction, Reyes-Gavilan outlined plans for interim services. Neighborhood libraries, which are currently closed on Thursday mornings, will open at 9:30 a.m. A retail location, “Library Express”’ will open at 1990 K St. NW to house Adult Literacy Resource Center and
Center for Accessibility as well as provide a small browsing collection of books and public access computers. Special Collections, including parts of Washingtoniana, will be available at the Washington Historical Society, the Georgetown Library’s Peabody Room and the Library of Congress. The Labs, which include the Fabrication, Memory and Studio labs, will be modified and relocated. The Memory Lab will be housed at the Northeast Library, 330 7th St., NE. Fifty laptops will be dispersed to neighborhood libraries to accommodate increased traffic. In addition to opening a Library Express location at 1990 K St. NW and expanding operating hours at all neighborhood libraries, many items that are unique to the Martin Luther King Jr. Memorial Library and books that are in good condition will be available at the District’s neighborhood libraries. The announcement concludes the community engagement that began in 2013. More than 70 community and stakeholder meetings and 13 focus groups were held across the city, hundreds of surveys submitted, and more than 4,000 people were reached in person or online. The project has been approved by the National Capital Planning Commission, the Historic Preservation Review Board and the U.S. Commission of Fine Arts. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 33
Page 34 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Unique Situations, Challenges — Percy Ransome’s Specialty
To solve the height problem, Ransome contacted Ted Faxon of Wickberg Marine Contracting in Belford, N.J.
By Brenda Ruggiero CEG CORRESPONDENT
For Long Reach High Reach (LRHR LLC) and Ransome Equipment Sales, customer calls for specialty job applications are a common and welcome part of the job. “This is one of the great challenges that Ransome likes — to solve customer’s problems,” said Percy Ransome, who owns both companies. One of the recent calls Ransome received was from Schiavone Contracting in Savaucus, N.J., to assist with a job that involved working underneath the bridges and approaches to Long Beach Island. “The problem was that the water was too shallow for a barge and too deep for an excavator and awkward to get to,” Ransome said. “The answer, of course, was an amphibious excavator, often termed a marsh buggy, that could go in and help place rip rap in wire gabion baskets.” One of the other problems was the low overhead height which wouldn’t allow a normal excavator to have sufficient clearance to carry the bag in and place it in the shallow water. To solve this problem, Ransome contacted Ted Faxon of Wickberg Marine Contracting in Belford, N.J. Earlier in the year, Wickberg Marine had purchased some pontoons from Ransome to modify a John Deere 240 into an amphibious excavator with a 60-ft. (18 m)-long
One of the selling points for Wickberg to buy a unit from Ransome was Ransome’s offer that he could get two or three months of rental income for this machine on a yearly basis.
reach. One of the selling points for Wickberg to buy a unit from Ransome was Ransome’s offer that he could get two or three months of rental income for this machine on a yearly basis.
“After being contacted, Faxon went down and visited with the folks on the job site and came up with a solution to clear the low overhead problem,” Ransome said. “Wickberg Marine fabricated a boom with a
cable winch that projected forward from the marsh buggy under the bridge to raise and lower the bag of rip rap. This job was efficiently done through the joint cooperation of see RANSOME page 124
One of the recent calls Ransome received was from Schiavone Contracting in Savaucus, N.J., to assist with a job that involved working underneath the bridges and approaches to Long Beach Island.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 35
2012 Volvo ECR235DL Hydraulic Excavator
(2) 2006 Caterpillar 325C LCR Hydraulic Excavators
2009 Caterpillar 321D LCR Hydraulic Excavator
"0" Swing, Q.C., Aux. Hyd., A.C., Rear Camera. Approx. 3,200 hrs.......................................$127,500
"0" Turn, Auxiliary Hydraulics, Digging Bucket............ ................................................ Priced from $89,000
Aux. Hyd., Q.C., A.C., 31" Tracks, 42" Bkt. Approx. 5,600 hrs................................................... $105,000
2005 Caterpillar M318C Wheel Excavator
1980 Bucyrus-Erie 88B HD Crawler Crane
2014 Caterpillar 314ELCR Hydraulic Excavator
Aux. Hyd, Coupler, 2 Outriggers, VA Boom, A.C., Blade 2 Bkts..................................................$52,500
Independent Boom Hoist, for Clam Use, Elevated Cab w/AC.................................................... $225,000
Auxiliary Hydraulics, Coupler, Digging Bucket, 4,900 Total Hrs, 3,000 Hrs. Idling.......................... $95,000
1994/2000 Galion 150FA Rough Terr. Cranes
1998 Link-Belt RTC-8050 Rough Terrain Crane
2000 Caterpillar 950G Wheel Loader
5 Available, 60' Boom.............. Priced from $19,500
50 Ton, 110’ Boom, 56’ SA, 2 Hoists, Auxiliary Hydraulics................................ REDUCED to $85,000
Quick Coupler, Side Dump Bucket & Forks, 23.5x25 Tires, Approx. 9,900 Hrs.............................. $62,500
TO VIEW OUR ENTIRE INVENTORY VISIT www.equipmentmartofny.com
203/335-0100
EQUIPMENT WANTED Fax: 203/335-7996
Answering Machine 24 Hours E-mail us at equipmart@aol.com
Page 36 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Four locations serve Maryland, Delaware, Washington, D.C. and parts of Virginia, New Jersey, and Pennsylvania Elliott & Frantz can show you the latest Gradall models, including Series IV excavators with highway speed travel capability. Featuring AutoDrive™, these models integrate a 6-speed automatic transmission and a new transfer case for efficient, simplified travel as well as convenient jobsite repositioning from the upper cab. Gradall excavators also feature the job-proven telescoping, tilting boom that enables you to do more different jobs with just one machine – even under bridges and trees.
WWW.ELLIOTTFRANTZ.COM
Delmar, DE 302-846-3033 Jessup, MD 410-792-9134 King of Prussia, PA 610-279-5200 Manassas, VA 703-257-2381
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 37
716-655-1101
1101 Maple Road Elma, NY 14059
Toll Free: 800-652-1101 Fax: 716-655-0374
PUT US BACK B ON YOURR BUCKET LIIST.
2016 KPI-JCI FT4250CC, (1) PIONEER FT4250, S/N- 415918, CLOSE CIRCUIT TRACK MOUNTED IMPACTOR INCLUDES: ENGINE - CAT C13 440 HP, TIER IV, 1800 RPM CONTROL SYSTEM RADIO REMOTE IMPACTOR - 4250 HORIZONTAL SHAFT WITH HEAVY-DUTY SOLID ROTOR ASSEMBLY, 3 REVERSIBLE AND REPLACEABLE BLOW BARS, HOURS: 358, SERIAL NUMBER: 415918, CONDITION: USED, STOCK NUMBER: AG1233....................$837,500
%$6&+0$11 6(59,&(6 DID.
2015 ASTEC GT205S: GT205S – THREE DECK SCREEN -ONE (1) 3520K TRIPLE DECK SCREEN: 5’ X 20’ TOP AND MIDDLE DECK, 18’ BOTTOM DECK, HOURS: 10, S/N: 154151................................$CALL 2016 KPI-JCI FT2650, FT2650 TRACK MOUNTED JAW CRUSHER ENGINE - CAT C9.3 300 HP, TIER IV, 1800 RPM CONTROL SYSTEM - RADIO REMOTE/TETHER VANGUARD JAW CRUSHER - 2650 AUTOMATIC HYDRAULIC DUAL WEDGE ADJUST CSS, HYDRAULIC DRIVE FOR CRUSHER, HOURS: 428, SERIAL NUMBER: 416212, CONDITION: USED, STOCK NUMBER: AG1238....................$776,466
Genuine KOBELCO exxcavators are back and #BTDINBOO 4FSWJDFT is the authorized KOBELCO dealer for contractors in our area.
TEREX/ASV R070T 33HP TRACKED SKID STEER: CAB WITH HEAT, SUSPENSION SEAT, ATTACHMENT CONTROL PLUG, 48" BUCKET...................................... CALL FOR PRICE
2013 JCI KODIAK 200/6203: K2006203CC K200+ JCI CONE CRUSHER AGGRESSIVE STROKE, MAXIMUM PRODUCTION CONE CRUSHER WITH TRAMP IRON RELIEF, S/N: P131706.......... $695,900
We represent this top p line of excavators because they’re reco ognized worldwide for outstanding qualitty, strong manufacturing support and competittive pricing.
ANACONDA TD516: TRACKED TROMMEL SCREEN 5 X 16 TROMMEL, EASILY TRANSPORTABLE, FORWARD & REVERSE 4-WHEEL DRUM DRIVE, 84HP JCB ENGINE, VARIABLE SPEED ON DRUM & ALL CONVEYORS, 2 UNITS AVAILABLE........................ $CALL
If you’re looking for eexcavators proven to drive increased productivity and profitability, maybe it’s time to add d KOBELCO to your
GT205S 5 X 20 TRIPLE DECK TRACKED SCREENING PLANT: 2015 MODEL YEAR........ ..................................................................................$CALL
2015 ASTEC GT165: 5 X 16 2 DECK, TRACK SCREEN PLANT, HOURS: 320+/-, APRON FEEDER, HOPPER EXTENSIONS............................................................................................ $CALL
bucket list. Call #BTDINBOO 4FSWJDFT today.
2016 ASTEC GT104, GT104 TRACK MOUNTED SCREEN SCREEN ONE (1) 2410 DOUBLE DECK SCREEN: 4’ X 9’ SCREEN WITH SIDE TENSIONED TOP DECK AND END TENSIONED BOTTOM DECK SCREEN DRIVEN BY HYDRAULIC VARIABLE SPEED VIBRATING MECHANISM MOUNTED ON SCREEN; ADJUSTABLE AMPLITUDE WITH ADD ON WEIGHTS; HOURS: 3, SERIAL NUMBER: 164346, CONDITION: NEW, STOCK NUMBER: AG1240.... $189,945 TEREX TSR60: APPROXIMATELY 180 HOURS, 60HP PERKINS TURBO DIESEL, 16GPM AUXILIARY HYDRAULICS, REVERSIBLE WHEELS, 67” BKT WITH BOLT ON EDGE........ NEW PRICE $23,900
ASV VS60 VERTICAL LIFT: 60HP, CAB HEAT & AC, RADIO, SUSPENSION SEAT, BLOCK HEATER, 72" BUCKET, HYDRAULIC BUCKET COUPLER............................ CALL FOR PRICING
2014 KOBELCO 17SR-3: NEW KOBELCO 17SR MINI EXCAVATOR. RUBBER TRACKS WITH EXPANDABLE UNDERCARRIAGE, DOZER BLADE, OPEN ROPS, PLUMBED, DRIVE: TRACK.......... $CALL
www.KOBELCO-USA A.com
Dealer Logo and Addr d ess 1101 Maple Road Elma, NY 14059
2015 ANACONDA TR60, THE TR60 IS A TRACK MOBILE HIGH CAPACITY STOCKPILING CONVEYOR, WHICH IS STRONG AND ECONOMICAL TO RUN. THE TR60 IS VERSATILE AND CAN BE USED ON ITS OWN OR WITH OTHER SCREENING PLANTS. HOURS: 624, SERIAL NUMBER: TR6036-0070, CONDITION: USED, STOCK NUMBER: AG1218................................................................................$77,500 KOBELCO SK350 LC MARK 8: 264HP HINO, 79,600LB, 31.5” TRACK SHOES, 13’7” ARM, CLIMATE CONTROL W/AC, AM/FM, BUCKET, BI-DIRECTIONAL, AUXILIARY HYDRAULICS..............$CALL
2016 KAWASAKI 62Z-7 WHEEL LOADER: WITH HYDRAULIC COUPLER, HEATED SEAT & MIRRORS, 2.5 CU YD BUCKET, 3RD VALVE, 20.5 RADIAL TIRES, (2) LOW HOUR EX SNOW RENTAL UNITS AVAILABLE.............................. .................................................. CALL FOR DETAILS
Page 38 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Dover • Lewes • Smyrna • Laurel • Milford • Rehoboth • Wilmington • Claymont • Bethany Beach • Blackbird • North Star • Adamsville • Delaware... Georgetown • Newark • New Castle • Downs Chapel • Willow Grove • Sandtown • Dublin Hill • Sycamore • Hearns Crossroads •Dover • Lewes • Smyrna • Laurel • Milford • Rehoboth • Wilmington • Claymont • Bethany Beach • Blackbird • North Star • Adamsville • Georgetown • Newark • New Castle • Downs Chapel • Willow Grove • Sandtown • Dublin Hill • Sycamore • Hearns Crossroads •Dover • Lewes • Smyrna • Laurel • Milford • Pepper Box •Gumboro • Willow Grove • Sandtown • Dublin Hill • Sycamore • Hearns Crossroads •Dover • Lewes • Smyrna • Laurel
‘First State’ Highway Lettings
The Delaware Department of Transportation received bids for transportation-related improvement projects. Following is a list of some of the projects let. County: New Castle Contract ID: T201011301.01 Project: Intersection improvements. Location: Summit Bridge Road, Armstrong Corner Road to U.S. 301 overpass. Engineer’s Estimate: $13,696,921 Contractors and Bid Amounts: • A-Del Construction Company Inc. — $10,720,017 • Greggo & Ferrara Incorporated — $10,838,389 • Diamond Materials LLC — $11,738,778 • Allan Myers Md Inc. — $11,997,777 • David A Bramble Inc. — $12,498,574 • Mumford & Miller Concrete Inc. — $12,510,525 County: New Castle Contract ID: T201201101.01 Project: Sidewalk construction. Location: Along Myrtle Avenue from the Philadelphia Pike to the I-495 overpass. Engineer’s Estimate: $720,511 Contractors and Bid Amounts: • Grassbusters Landscaping Company Inc. — $683,294 • Reybold Construction Group LLC — $837,955 • Site One LLC — $892,941 • Sams Construction LLC — $1,020,021 • A-Del Construction Company Inc. — Irregular County: Sussex Contract ID: T200811201.01 Project: Construct roundabout. Location: At the intersection of Zoar Road, Speedway Road and Bethesda Road. Engineer’s Estimate: $1,643,875 Contractors and Bid Amounts: • Grassbusters Landscaping Company Inc. — $1,383,294 • George & Lynch Inc. — $1,479,605 • A-Del Construction Company Inc. — $1,530,619 • JJID Inc. — $1,640,976 County: New Castle Contract ID: T201706401.01 Project: Repair sections of cement concrete pavement. Location: On roads in Deldot North District. Engineer’s Estimate: $2,958,745 Contractors and Bid Amounts: • Greggo & Ferrara Incorporated — $2,227,160 • Guardian Environmental Services Company Inc. — $2,666,405 • JJID Inc. — $2,686,743 • Mumford & Miller Concrete Inc. — $3,012,222 • Diamond Materials LLC — $3,588,259 • A-Del Construction Company Inc. — $3,912,424 • Eastern Highway Specialists Inc. — $4,878,427
County: New Castle Contract ID: T201706402.01 Project: Repair sections of portland cement concrete pavements. Location: Along interstates I-95/I-295/I-495, including their associated ramps, and Delaware Expressways which includes Route 1, Route 7 and Route 141. Engineer’s Estimate: $4,890,650 Contractors and Bid Amounts: • JJID Inc. — $4,459,839 • Greggo & Ferrara Incorporated — $4,518,572 • Mumford & Miller Concrete Inc. — $5,177,777 • Diamond Materials LLC — $6,306,326 • A-Del Construction Company Inc. — $7,352,221 • Eastern Highway Specialists Inc. — $7,714,308 County: New Castle Contract ID: T201407104.01 Project: Bridge replacement. Location: Bridge 1-438 on N463 Blackbird Station Road over Blackbird Creek. Engineer’s Estimate: $1,235,000 Contractors and Bid Amounts: • Zack Excavating Inc. — $1,025,801
• Mumford & Miller Concrete Inc. — $1,183,809 • JJID Inc. — $1,295,986 • Kuhn Construction Company — $1,327,740 • Eastern Highway Specialists Inc. — $1,618,623 County: New Castle Contract ID: T201407105.01 Project: Bridge rehabilitation. Location: Bridge 1-680 on SR 141 Basin Road U.S. 13. Engineer’s Estimate: $11,521,880 Contractors and Bid Amounts: • Mumford & Miller Concrete Inc. — $15,555,555 • Kuhn Construction Company — $15,726,138 County: New Castle Contract ID: T201606113.01 Project: Pavement rehabilitation. Location: NORTH XIII. Engineer’s Estimate: $971,881 Contractors and Bid Amounts: • A-Del Construction Company Inc. — $932,379 • Greggo & Ferrara Incorporated — $1,070,421 • Diamond Materials LLC — $1,231,928
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 39
FIVE STAR EQUIPMENT, INC. CALL
800-441-8195
FAX
2002 Deere 644H, Stk# 23298, 15,611 Hrs, Cab w/Air, RC, 2FH, Radial Tires.... ................................................ $48,000
ASK ABOUT FINANCING ON USED EQUIPMENT EMAIL begginjeff@fse-i.com
570-346-3870
2012 HT ZX85U, Stk# 70807, 766 Hrs, Cab, 18” RBR, 6’ 11”, PLBG, CPLR, Thumb, 1-Way........................ $88,000
2012 Deere 310SK, Stk# 23313, 1035 Hrs, Ult Cab, 4WD, Aux Hyd, 24” Bkt.... ................................................ $66,000
1996 Deere 650G, Stk# 23310, 6507 Hrs, ROPS, 18” Pads, 104” Blade.......... ................................................ $34,000
1994 Galion 870, Stk# 31232, Cab, 14’ MB, Turbo................................ $32,000
2013 Deere 135G, Stk# 23176, Cab, 28” STL, 9’11”, Aux Hyd, 36” Bkt.......... .............................................. $120,000
2006 Deere 310SG, Stk# 23403, 1802 Hrs, Cab w/Air, Ext Bkhoe, 24” Bkt, Multi Purp Bkt, 5 Fun........................ $47,000
Pennsylvania Locations: Dunmore • Athens Waterford • Williamsport
New York Locations: 2010 Deere 444K, Stk# 23048, 4260 Hrs, Cab w/ Air, 4WD, Hi-Vis Cplr w/ GP Bkt, ZBAR, 17.5R25.......... $95,000
2015 Deere 35G, Stk# 23317, 607 Hrs, Cab, 12” Rubber Trks, 5’8” Arm, ABlade.......... $55,000 Reduced $48,000
Kirkwood • Syracuse Rochester • Orchard Park
For Our COMPLETE INVENTORY of Used Equipment with Photos and Detailed Descriptions visit www.fivestarequipment.com
BRANDYWINE TRUCKS AND EQUIPMENT WE BUY EQUIPMENT!
(301) 372-0083 Shipping & Containerization Available
WE BUY TRUCKS!
WWW.BRANDYWINE-EQP.COM Unused New Witzco Lowboys, Customization Available, 35-50 Ton in Stock........ $Call
2011 John Deere 450J LGP, EROPS, 6-Way Blade, Only 2000 Hrs, 24” Pad, Stk #863I.................................. $54,900
2008 Ingersoll Rand XP375WIR Air Compressor, 5782 Hrs, John Deere Diesel Engine, Great Running Unit........ .................................................. $15,900
2014 Komatsu D39EX-22 Dozer, 1234 Hrs, EROPS w/AC, Prepped for GPS, 6-Way Blade, 20” Pads............ $99,900
2016 Case 221F, 7 Hrs, EROPS, Aux Hyd, Hyd Q/C............................$67,400
‘98 & ‘99 Tamrock CHA550 Crawler Drills, 16’ Mast, 11’ Boom, Hyd. Leveling, Dust Collectors.... $29,900 EA.
2012 Caterpillar 328D LCR Excavator, CAT Hyd Q/C, 48” Bucket, 11' Stick, Aux Hydraulics, 5,071 Hours........ $145,500
1999 Caterpillar 12H Grader, 12' Blade, A/C Cab, Ripper/Scarifier, 17.5X25, 6,549 Hours, VERY Clean!........ $77,500
2008 Cat 314C LCR Excavator, 4158 Hrs, New Paint, New Geith 36” Bkt, New Oriel Hyd. Thumb, Hyd. Q/C, Aux Hyd., Stock# 761I...................... $69,900
Unused Tasca THH3200B Hammer, To fit 336D Excavator / 32-42 ton excavators, auto lube pre disposition, two “Moil Point ‘M’ type” bits, one set of N2 Nitrogen charges...................... $28,900
2015 Genie GTH-844 Telescopic Forklift, 2 Hrs, OROPS, 3-Way Steer, Aux Hyd, Manual Q/C, Foam Filled Tires, 44’ Reach......................................$102,900
2015 Bomag BW211-4 Compactor, 77 Hrs, EROPS w/AC, 84” Drum, Hi/Low Frequency................................ $92,500
Page 40 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Garnet Mine Chooses Volvo Equipment Due to Site Sim
Making light of the heavy-duties is the job of two Volvo machines, working in harmony to lift and load the material for processing. MINE from page 30 We are a full service authorized Eager Beaver Dealer.
YOUR FULL SERVICE VIBROTECH SCREEN DEALER FOR NJ & DEL.
2006 Case 580SMII, EROPS, Heat&A/C, 4x4, Stk# LB180...... $34,500
DELIVERY
2007 Altec Chipper DC1217, 709 hours, Diesel, 12” Disc, Stk# WC031.................... ................ $13,500
2005 Freightliner M2106 Dump, White, Merc 6.4L, Stk# DT126.............. ................ $44,900
2013 Bomag Roller, OROPS, 47” Drums, 458 Hrs, Stk# AR015.............. ................ $28,900
2011 Case 580SN, EROPS, AC, 4x4, GP Bkt, Stk# LB183.............. ................ $53,900
2011 JD 310SJ, Heat & AC, Lever Controls, Stk# LB194.............. ................ $51,900
Various New Excavators, Grapples and Thumbs
FINANCING
MIKE ZYNDORF LLC 609-625-8660 609-442-5514 (EVENINGS) FAX 609-625-8664 6481 Harding Hwy (Rt 40) Mays Landing, NJ 08330 Please Visit us www.mzequipment.com for our complete inventory
excavate, load and transport a much greater volume of garnet ore. “Site Simulation was a big part of the decision-making,” said Fish. Barton’s fleet includes Volvo EC700C and EC480E excavators, as well as A40G full suspension articulated haulers. Respected dealer, Vantage Equipment, located nearby in Upstate New York, has supplied the machines. Proper Professionals The larger Volvo excavator is equipped with a longer boom, allowing excavating at depths of up to 3.2 ft. (10 m). “When the rock is blasted, there is oversized material that won’t go through the crusher,” explained Jeffery Osborne, territory manager of Vantage Equipment. “We were able to prove that it was easier to sort the oversize with the EC700C and set it aside.” Joining the excavators is the Volvo A40G full suspension articulated hauler. Given its ability to adapt to the specific rigors of Barton’s site, Osborne said Volvo Site Simulation helped him illustrate how Barton could benefit from using Volvo articulated haulers. “It’s a much smoother ride,” he added. “It’s less stressful on the truck, the drivetrain, and most importantly — the operator.” The articulated hauler has proven popular among the crew. “We used to have old rigid frame trucks,” recalled machine operator, Colby Gage. “They had basic suspension and would virtually bounce you out of the seat. The Volvo articulated trucks are smooth and quiet in the cab. They float and adjust themselves as you
drive, so you stay in the seat.” Safety was an important factor in Barton’s equipment decision. “With the Volvo equipment, the safety features have been absolutely outstanding for us,” said Barton. Also, because the company has a strong sense of environmental responsibility, Barton said fuel efficiency and the quality of emissions were paramount. “There’s no doubt that those Volvo machines help with our environmental objectives.” What a Gem of an Idea “All of these factors rolled up to a decision that, at the end of the day, was actually a little bit easier than we expected,” said Barton. “Volvo’s maintenance program, with all its bells and whistles, the financing program and the flexibility there, the safety aspect — the Volvo equipment clearly was the winner.” Barton still mines and processes garnet for abrasives in the Adirondacks. Over time, the Barton family has developed the business to include new markets, products and applications. The company also produces and distributes garnet for water-jet cutting and blasting media. Reflecting on the evolution of the company, Barton beams with pride. “I think my great-great-grandfather would marvel at where the business is today and how the markets and technology have evolved. I think he would be quite surprised at what the business has done since he started it 138 years ago.” For more information, visit volvoce.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 41
ShoorQuip Suupply,y, Inc.
Trench Shielding & Shoring
Call Us Fo or All Your TTrench ren nch Shoring Ne Needs eeds | We Carrry 11” Steel Rooad Plate
Manufactured by
Efficiiency Prroduction, oduction, Inc. Inc c.
Manhole Box
1302 Conshohockken Rd Conshohocken, PA 19428
Slide Rail
Manufactured by
Slide Rail System
Aluminum Build-A-Box uild-A-Box
Safe-T-Shor T-Shorre e
Aluminum Hydraulic Shoring
610 . 239 2 .6234 6234 ww ww shorquip coom ww.shorquip.co
Steel Trench Box
fax: 610.239.6237 sales@shorrquip.com
Page 42 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Satisfaction Guaranteed!
2012 CAT D4K LGP, #125-16016, 2397 Hrs, EROPS, air, VPAT w/blade shake, ARO ready, drawbar, 25” Syst One.......... $82,500
SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15
Made in the USA
The SEAL SAVER WILL: Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring
2011 CAT 314D LCR, #130-15068, 5552 Hrs, air, reach boom, 9’10” stk, aux hyd, Cat QC, 20” TBG w/inserts, bkt ........................ $87,500
STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:
2007 CASE 580SM II, #110-00140, 5972 hrs, 4WD, EROPS, Rbit engine, frt cwt, GP Bkt, ext-hoe, rear hyd, BH bkt....................$29,500
Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062
1-800-683-5189 Fax: 770-509-5832
Visit
Farmington (Rochester), New York Fax: 585-924-7624 Email: jfinlon@americanequipmentllc.com
www.sealsaver.com
for more information or contact us at 1-800-683-5189
585-466-4902 www.americanequipmentllc.com
‘Jay Leno’s Garage’ Showcases Stertil-Koni Mobile Columns Heavy duty vehicle lifts from StertilKoni were recently featured on the extremely popular TV show, Jay Leno’s Garage, which is broadcast on CNBC and also is available online. Leno is recognized worldwide as a prominent TV celebrity, talk show host and comedian extraordinaire who is passionate about getting under the hood of, and behind the wheels of, classic and modern vehicles. So, when it comes to lifting cars and trucks in the former Tonight Show host’s expansive workshop, there’s one product that is always up to the task — wireless mobile column lifts from Stertil-Koni. Leno noted that Stertil-Koni’s vehicle lifts catch the eye of many a visitor to his Burbank, Calif., garage. In the episode dubbed “1,000 HP ‘Vicious’ 1965 Ford Mustang,” he tells Jason Pecikonis of Timeless Kustoms, as they stroll under the restored sports car, “Whenever guys come into the shop, they are not impressed by what we are working on, they are impressed by these lifts.” In the show, Leno uses a set of four StertilKoni EARTHLIFTs to raise the souped-up classic car. Recognized as the industry’s first “green” mobile column lift, EARTHLIFT
has columns that are made from components that are 98 percent recyclable, uses biodegradable oil, features batteries that are 100 percent recyclable, and employs an active energy retrieval system delivering 35 per-
cent more lifting cycles at maximum load. As a dedicated vehicle enthusiast and knowledgeable technician, Leno passionately explores the very latest in vehicle servicing and restoration techniques in his Emmy-
award winning program, Jay Leno’s Garage. The show is the result of the man’s love for all things automotive. It first aired in October 2015 and features all types of motor vehicles — sporty, classic, restored, vintage cars, trucks and motorcycles. Jean DellAmore, president of StertilKoni, said: “We’re big fans of Jay, greatly appreciate his kind words and absolutely love to see our lifts in action — contributing to the efficiency of his facility and making such a big impact on his viewers.” This is the second time Stertil-Koni lifts have been featured on the automotive showcase. Another segment of Jay Leno’s Garage featured Leno and a sales manager from Stertil-Koni. Then, the topic was the installation of a frictionless induction braking system in a beautifully restored 1941 American LaFrance Fire Truck. Stertil-Koni wireless mobile column lifts were up to the job — easily handling the lifting and lowering of the TV star’s eight-ton classic, V12 engine monster fire truck.
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 43
F I N A N C I N G AVA I L A B L E 286 Central Ave., South Kearny, New Jersey 07032
800-255-5512 Phone 973-589-4100 • Fax 973-589-4811
E-mail: info@tes-inc.net • Website: www.tes-inc.net
2007 Kalmar DCE 140-6, 31,000 Lbs. @ 24” LC, Enclosed Cab w/Heater, CAT Diesel C6.6, Dana TE1300 Trans, 167” Triple Mast, SS/FP, 96” Forks.. .......................................... P.O.R.
2000 Manitowoc 2250, 300ton, Series III ctwt option, 260' boom, Cummins diesel, S/N: 2251051.................... P.O.R.
2007 Manitou MT1745, 10,000 lb. capacity, 54’ max lift, repaint, enclosed cab...... .......................................... P.O.R.
2001 Link-Belt RTC 8040 SII, 40-ton, S/N: F7J1-5291, 105’ main boom, 28’-51’ 2-piece jib, Hydro gas ride, Aux winch, Rear steer indicator.... .......................................... P.O.R.
1980 Manitowoc 4100W SII, 230-ton, S/N: 41649, 150' boom................................ P.O.R.
1999 Link-Belt LS248 HII, 200-ton, "C" ctwts, Ctwt removal system, 3rd drum, 200' main boom, 2 winch, S/N: H3I9-2238................ P.O.R.
2007 Manitou M50-4, 10,000 lb. capacity, 4WD, 163” max lift w/ SS, enclosed cab, 48” forks..................................P.O.R.
2005 Manitex 1770C, 17- Ton, S/N 119511, 18,042 miles, Ford F750 210 HP CAT diesel, 23’ jib, 20’ wood deck.... P.O.R.
2008 Link-Belt RTC 8090, 90ton, 140’ main boom, 35’ – 58’ jib, 2 winches.................. P.O.R.
2009 Shuttlelift 3340B, S/N: 321134, 10.5-ton, Diesel engine, Independent outriggers, 13’-32’ boom w/12’-28’ jib, Block & ball, New York City swing lock.............. P.O.R.
2007 Demag AC200-1, S/N: 33167, 240-ton, Drive axle: 10x8x8, ZF automatic transmission, 6 cylinder diesel engine, 223’ main, 108’ jib...... .......................................... P.O.R.
2007 Link-Belt 218 HSL, 110ton, 150’ main boom, “ABC” Ctwts, Block/Ball, diesel engine.............................. P.O.R.
Authorized Dealer
Page 44 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Home of the Rotating Telehandler • Multiple attachments - One machine! • Jibs; aerial platforms, buckets, etc. • Hydrostatic drive for simplicity • Built-in sideshift for precision • Compact stabilizers for safety • Frame leveling for accuracy • Ring of steel for protection
Rental Units Available Rotates 360˚
(800) 479-3857
Current Specials Merlo 50.18
Manitou MRT 2540
2013, Approx. 500 Hrs, Max Lift 11K Lbs, Max Height 58’-5” CALL 2013, Approx. 1300 Hrs, 80’ Max Height, Like New............................................CALL
Merlo ROTO 40.30 MCSS
Merlo ROTO 45.21 MCSS
2015, Approx. 1000 Hrs, 97’ Max Height, Clean, Like New Machine with Warranty.. ........................................................ CALL
2014, Approx. 1300 Hrs, 68’ Max Height, Like New with Warranty.................... CALL
Largest Rental Fleet in the US Call for Details
HIGH PERFORMANCE WIRE ROPE
LIFTING, PULLING AND BINDING EQUIPMENT SPECIALISTS • O.S.H.A. approved Chain, Wire
• Safety Belts & Harnesses
• Hoists – Electrical, Mechanical,
• Come-A-Longs - Chain & Wire Rope
Rope, & Nylon Sling Assemblies & Air; Gib Cranes & Gantries
• Forged Fittings, Shackles
Turnbuckles, Eyebolts, & Hooks
• Chains & Binders
• Cargo Control & Tie Downs
• Industrial, Roller, & Conveyor Chain • Ratchet Tie Downs
• Push-Pull Control Cables • Synthetic Slings • Proof Testing –
Certified On-Site to 100,000 lbs
Specializing in WIRECO, CASAR AND OLIVEIRA WIRE ROPES!
®
• Rotate bucket up to 180% • Increase productivity up to 50% • Eliminate extra equipment on jobsite Videos and more at
experiencethetilt.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 45
Hydrema 912HM M. Off Road superio or. Talk T alk to Y Your our local dealer or visit hydrema.us
Pine Bush Equipment Co. Inc. Location: NY Tel: (845) 744 2006 www.pbeinc.com
East PBE Location: CT Tel: (860) 665 7470 www.pbeind.com
Jesco Inc. Location: NJ, MD, DE Tel: (908) 753 8080 www.jesco.us
Anderson Equipment Company Location: Western PA, NY, NH, ME Tel: (412) 343 2300 www.andersonequip.com
Best Line Equipment Location: Eastern PA Tel: (800) 679 2378 www.bestline.com
ATS Equipment Inc. Location: MA, NH Tel: (800) 491-8565 www.atsequipment.com
Page 46 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
A Look Back: Construction of Irvin Works in Clairton, Pa.
HCEA photo
Caterpillar photo
The LeTourneau carryall pans are shown operated in tandem and singly, drawn by Caterpillar RD-8 tractors, ca. 1937.
A single Caterpillar RD-8 tractor pulls two loaded Athey forged-trak 2-way dump trailers to a fill area.
By Edgar A. Browning
Marsch & Peterson included eight 2 1⁄2-cu. yd. (1.9 cu m) shovels, Northwest 80-Ds, Marion, and Bucyrus-Erie; three elevating graders, four U-12 LeTourneau 12 cu. yd. (9.2 cu m) scrapers used in tandem and two LeTourneau J-12 scrapers used singly; 26 Athey crawler dump wagons from 8 to 12 cu. yds. (6.1 to 9.2 cu m) capacity; 22 Euclid FDT 12 cubic yard bottom dumps; eight Caterpillar RD8 diesel tractor with LeTourneau bulldozer blades and 33 RD-8 tractors to pull the scrapers and dump wagons. The equipment spread achieved production rates as high as 48,000 cu. yds. (36,699 cu m) per day using three eight hour shifts.
SPECIAL TO CEG
The new $45 million Irvin Works of the CarnegieIllinois Steel Corporation in Clairton, Pa., near Pittsburgh was America’s largest industrial project in 1937. The 300 acre hilltop site, high above the Monongahela River, required heavy grading. The excavation of five million cu. yds. of material was undertaken by a joint venture of Guthrie, Marsch & Peterson, comprised of A. Guthrie & Company Inc. of St. Paul, Minn., John Marsch of Chicago, Ill., and the Edward Peterson Company of Omaha, Neb. American Bridge Company was employed to erect the buildings for the steel mill. Major equipment used on the project by Guthrie,
Athey forged-trak 2-way dump trailers.
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
Caterpillar photo
Caterpillar photo
Northwest 80-D shovels loading earth and rock into a fleet of Athey forged-trak 2way dump trailers pulled in tandem by Caterpillar RD-8 diesel tractors.
A Caterpillar RD-8 diesel tractor pulls a LeTourneau rooter ripping laminated shale. Approximately 40 per cent of the excavation on the project was rock.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 47
OPDYK OPD YK KE IINC N C.. $119 9,500
12 T TO ON
87 779
Trucks s11 2 3 .CC O M
SPEC SPE CIALIZED C I A L I Z E D TRUCK TRUCK & EQ EQU UIPMENT I P M E N T SALE S A L ES S 29,500 8865 $12
$89,500
8896 96
$59,500 00
8781
UUNNDDEER CCDDL
19 9,,9 99 92 m miille es 2014 20 14 4 INTERNA ATI TIO ONA NA AL L 4300; DT466 6 CYL (260 HP); ALLISON 6 SP; A/C; 33K GVW. AL A LTEC L TEC D TE DM4 M4 47 7BT BT TR D DIIG GG GE ER DERRICK; 12 TON; 47’ H HOOK HEIGHT; 12’ UTILITY BODY Y.
$79 79,500
4x4 4x x4
8832
6x6 6x x6
70 7 0,0 0, 006 miles 00 miiles m le es
93 9 3,17 78 m miille es
36 3 6,,7 79 90 m miille es
2010 INT 201 TERNA ATI TIONA AL 74 40 00 6X X6; M MAXFORCE 6 CYL (300 HP); FULLER 10 S ; A/C; 52K GVW SP W.. CA AB & CHA ASSI SIS; 1 186’’ CA; 288’’ FRAME; 262’’ WB.
884 847 47 $59,500
$6 69,500 9,,500
10 09 9,325 ,325 325 25 miles ille es 2014 2014 14 4F FR RE EIGHTLINER IGHTLINER GHTLINER HT TLINER LINER LINER NE ER M2-106; 2--106; CUMMINS ISB13 6 CYL (250 HP); ALLISON AUTO; A/C; 33K GVW. 2013 T RAN R A N S -TEC ECH A L U MINUM AL FU UE L T AN A K K; 2800 GAL CAP; 1 COMPT T..
$79, 9,500 ,500 00
$7 $ 79,500 ,,500 500 00
8861
71 7 1,,5 527 m 52 miille es
200 20 09 F FR RE EIIG GHT HT TL LI LIN NE ER M2-1 -10 106; CUMMINS I -240 6 CYL (240 HP); EA ISB ATON TON O HYBRID 6 S ; A/C; 32K GVW. VERSA SP ALIFT B BU UC CK KET ET T VST T5000; 50’/55’ HEIGHT H ; 11’ UTILITY BODY Y.
UNMOUNTED KNUCKLEBOOMS
22 2 2T TO ON
886 8860 60
8803 24,656 4,656 ,656 656 56 miles iles les es
F U E L T R U CCK K S I N STT O CK! CK $29,500
$79, 9,500 ,500 00
8872
131 1,,,652 65 52 miles iles le es
9T TO ON
8785
200 20 05 INT TERNA AT A TIO TI ONA ONA AL L 74 400; DT466 HT 6 C (285 HP); ALLISON CYL O 5 SP; A A/C; 58K GVW. EF FF FE R 2 1 0 0--6 6S K NU U CK KLEBO OO OM; 9 T ; RADIO REMOTES; 9’6’’ STEEL B TON BED.
886 66
19 99 96 MA ACK AC K RD D688S; E-7400 (400 HP); FULLER 8SP; A/C; 73,280 GVW. MA A IT AN TEX EX X CRA ANE AN MODEL M ODEL DE EL 22 2 284 84; 4 4; 22 TON T ; 94’ HOOK HT; ANTI TWO BLOC CK; 20’6’’ WOOD FLA AT TBED.
2011 F 20 FREIGHTLINER RE EIGHTLINER GHT G HT TLINER LN LINER NE ER M2-106 106; FULLER 10SP; AIR RIDE; CUMMINS ISC-300 6 CYL (300 HP); A/C; 54,600 GVW. 28 2 8’ LEDWELL WELL LL W WOO WO OO OD RO OLL LLBA A ACK CK K.
200 20 02 C CH HEV EVY VY C//8 85 50 00 0: CA AT T 3126 6 CYL (300 H HP); FULLER 8SP; A/C; 52,080K GVW. 2 2004 004 04 MOFFET OF FF F FET TT M M5500 5500 500 00 PIGG GG GYBACK YBACK AC CK K FOR ORKLIF RKLIF L FT; 2.5 TON; 5,500LB MAX CAP; 21’ STEEL FLA T ATBED TBED.
$74 74,500 4,500
$4 49, 9,500 ,500 00
$59,500
8885
17 70 0,,2 27 72 miles iles les es
889 92
190,613 90,613 ,,613 613 3 miles
55.5 T TO ON
36 62 2,,062 06 62 miles iles le es ENW EN WO ORT ORT TH T800; CA AT T C12 6 CYL (410 LLER 13 SP; AIR RIDE; A/C; ALUM S; 70K K GVW. PAL ALF FIIN NG GE ER P PK K3 32 2080C 08 80 0C LEB EBOOM; O M; 9 TON; CONT ROT TA ATION; OA AD S SYSTEM; 24’ WOOD FLA ATBED TBED.
33112 23
BET B ET TH T HL LEH LE HE EM M
PIIK P KE K E E,
HA HAT H AT TF T FIE FI EL LD, LD D
PA P A
15 52 2,,74 74 48 miles iles le es
200 20 09 F FR RE EIIGHTLINER GHT HT TL LIN LI NE ER M M2 2-1 -112 2; MERCEDES MBE4000 6 CYL L (350 HP); FULLER 10 SP; A/C; 84K GVW. 20 2 007 07 7 P PALFIN AL AL LF FINGE GER / CRA AYLER A YLE YL LER C CR R5 55 4 WA WA WAY AY Y PIGGYBACK YBA AC CK F C FO ORKLIF FT; 2.75 TON; 24’ STEEL FLATBED.
119 944 440
51,,7 5 77 76 miles miles les es 200 20 06 INT NTERNA TERNA RNA NA ATIONAL TIONAL ONA ONAL AL L 4300; 0; DT466 6 CYL (255 HP); ALLISON 5 SP; A/C; 33K GVW. 2 2005 00 05 E EF FF FE ER 1 155.11/2S 55 5.11/2S 11//2S 2S KNUCKLEBOO OOM; 5.5 TON; 13’ STEEL FLAT/UTILITY Y.
886 66 6--2 6 2339 2 9--04 9 04 0 451 45
8835
4x4 4x x4
20+ 2 0+ +U USED SED sta st tart ta art rttiin ng g at $3 $3, $ 3,900 90 9 00
87 771
$39,500
112 2,,401 40 01 miles iles le es
200 20 09 F 0 FO OR RD E E3 35 50 V VAN AN AN; 5.4L GAS ENGIN NE; AUTO TRANS W/ O/D; A/C; 9,500 GVW W. T TE ER REX EX X H HIIRA RA AN NG GE ER B BUCKET UC CKET CK ET T MODEL M ODEL ODEL EL L NT T29; 29’/34’ HEIGHT; 12’ VAN. $6 69,500
8887 87
9T TO ON
2333.5 TON 2 TON
2001 20 01 1 T TA A AL LBE LB ERT RT T LOW WBOY T TRAILER; RA AIL LE ER R; 19’ DECK. FAS ASSI S F900XP 0X XP P.22 .2 22 KNUCK K-LEBOO OOM M; 23.5 TON; RADIO REMOTES.
UUNNDDEER CCDDL 20 2 08 8,,4 42 29 m miille es 199 19 99 INT NT TERNA ATI TIO ONA NA AL L 4900; DT466 6 CYL (210 HP); 7 SP; 33K GVW. 1 19 974 74 NEPTU T UN NE ST TE EE EL L PROPAN ANE TAN ANK; 2400 GAL CAP; BLACKMER P PUMP; NEPTUNE METER; REG PRESET T;; 1 HOSE REEL.
28 2 8,859 ,859 859 59 miles iles les es
200 20 08 8 INT TERNA AT A TIO TI ONA ONA AL L 74 740 00 0 C/ C/CA /CA CA AB B / 4X4 4X4 4X 4; MAXFORCE DT 300HP; FULLER 10SP P; 2SP TRANSFER CASE; 31K GVW. 13 1 3’ F FLA LA AT T TB BED W/ BED WINCH.
200 20 06 MA ACK AC CK CV CV71 V713 3; MACK AMI-370 6 CYL (370 HP); MACK 8 SP; A/C; 60K GVW. NA ATI TO ONA NA AL C CRA RA ANE 900A A; 26 TON; 157’ HOOK HT; LMI SYSTEM; 2 SP WINCH; DOWNHAUL WGT; FRONT ST TABILIZER; 21’6’’ STEEL FLA ATBED TBED.
200 20 09 PET TERBIL LT T 355; CUMMINS PX8-315 6 CYL (315 HP); AUTO; A/C; ALUM WHEELS; 33K GVW. TRA ANS-T TE EC C CH AL A LUM UMIIN NU UM FU F UE EL L TAN ANK; 2800 GAL CAP; -2 COMPTS. $29 9,500
26 TON 2 TO T ON
54 4,,4 47 73 m miille es 200 20 07 7 F FO OR RD F F6 65 50 SD; CUMMINS 5.9L 6 CYL ( (215 HP); 6 SP; A/C; 26K GVW. VAC ACMA MA AST ST TE ER VN V ND DS4 S4 40 00 00 VAC ACU UU UM EXCAV CA AVA VA V ATOR; JD ATO D 6 CYL D DIESEL; TUTHILL BL LOWER; VANAIR AIR COMP P.
$6 69,500 69 8877 87 77 $
8883
$99,500 ,5 500
UUND NDDEER CDDL 201 2 012 12
INT NT TERNA NA ATIONA TIO ONA AL
70 7 0,,04 04 41 miles
4300 4 30 00
4X4 4X4 4X 4;
MAXFORCE (300 HP); ALLISON 5 SP; A/C M C; 2 25,999 GVW. STELLAR TELLAR EL LLAR LL LAR AR 10 0921 921 21 S SERVICE ERVICE RV VIICE CE CRA RANE; ANE; RADIO REMOTES; 12’ STEEL FLATBED B .
SSA AL A LES@ S@ @O @OPDYKES.COM OPDYKES.COM Y YK KESS..C CO COM OM
THE LEAD DING SUPPLIER OF HYDRA DRAULIC & INDUSTRIAL HOSES,, FITTINGS, AD DA APTERS & MORE!
MINIMIZE EQUIIPMENT
C CUSTOM BUILT
DOWNT IME WITH OUR ETA 1 HO OUR 24/7
ON SI ITE HOSE SER RVICE Our trained service techn nicians arrive at your site, re emove the failed f hose, then fabricate and install a new high quality hose on site to ge et you up and running quickly.
H HOSE ASSEMBLIES Equ uipment Managers, make life e easier! We can supply ALL the specialized zed parts you u need, even hard to find mettrics, at our con nvenient service counters. We also offer: f
We B Bring i th the Hose Shop H S to You! o
• Tube Bending Service •O Oil Filtration Products o •P Pneumatic Products o •M Machine and Component Recovery covery •P Preventative Hose Maintenance ce Programs •A Automotive Products, Brake Lines, L •A And More!
Boston, MA
New Jersey
N Norfolk, VA VA
Philadelph hia, PA
Pittsburgh, PA PA
Richmond, V VA A
Was shington, DC
PIRTEK A Avon von 508-584-9595
PIRTEK Newark 908-624-9990 PIRTEK South Brunswick 732-940-7333
PIRTEK T Lake Wright 7 757-460-4673
PIRTEK South S Philadelpphia 610-586-22290
PIRTEK Monroeville 412-373-9720
PIRTEK West End 804-442-7140
PIR RTEK Rockville 3001-910-4673
Page 48 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Northeast District...
Hyundai CE Americas Adds Eric Cliff as Service Manager
Eric Cliff has joined Hyundai Construction Equipment Americas as Northeast District service manager, supporting Hyundai dealers throughout the northeastern United States.
Hyundai Construction Equipment Americas Inc. announced the addition of Eric Cliff as northeast district service manager. He will provide product support to Hyundai dealers throughout the northeastern United States, reporting to Scott Rainwater, national service manager. “We are happy to welcome Eric to the Hyundai dealer support team,” said Rainwater. “Eric brings a strong skill set to our service department that will help our dealers deliver ‘the Hyundai edge’ to their customers.” Prior to joining Hyundai, Cliff worked as a dealer shop-field service technician for several mining operations and construction equipment dealerships in New Jersey, gaining experience and insight into equipment operations, service and warranty systems. He is a member of the Equipment Managers Council of America and is a certified equip-
ment maintenance manager thru the George Washington University continuing engineering education program. Hyundai Strengthens Internal Staff With Two Key Hires Hyundai also announced the hires of Kevin Martin as controller and Jae Park as legal assistant, both reporting to K.S. Seo, chief financial officer. Martin joins the Hyundai finance team with 15 years’ experience as a corporate controller. Park joins the Hyundai legal department with private and public sector legal experience, including a position with the Federal Trade Commission. For more information, visit www.hceamericas.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ April 19, 2017 â&#x20AC;¢ Page 49
I NAVAILABLE STOCK! NOW Visit our web site at EagerBeaverTrailers.com
and you're a "click" away from getting all the information you need from our nearest dealer.
PAYMENTS AVAILABLE AS LOW AS:
20 XPT
s #!0!#)49 LBS
$ * * per month (60 months)
*
20 XPT / Hydraulic Ramps $ s #!0!#)49 LBS
* per month (60 months)
*
25 XPL / Lift Front Axle $ s #!0!#)49 LBS
* per month (60 months)
70
* 0AYMENT DOES NOT INCLUDE &REIGHT AND 4AXES
th
ANNIVERSARY
1946-2016 For a quote on any model, please call 800-257-8163
>> EagerBeaverTrailers.com
Page 50 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Ensuring Your Safety…
AGC: Construction April Marks National Safe Digging Employment Rises Month — Call 811 Before You Dig by 6,000 in March By Pipeline and Hazardous Materials Safety Administration April is National Safe Digging Month. Careless digging poses a threat to people, pipelines and other underground facilities, so in April, we highlight the importance of safe digging to remind homeowners and contractors about the dangers that reckless digging can cause. Each year, damage to underground facilities results in incidents that include injuries and fatalities. To help ensure your safety, you are required to call 811 — a toll-free, one-call notification center — 48 to 72 hours before beginning any excavation or digging projects. By calling 811, you can verify the location of any underground facilities in and around your excavation site, such as hazardous liquid and natural gas pipelines, telecommunications systems,
electrical utilities, sewer pipelines and water pipelines. Remember, the required call even applies to small projects like planting trees and shrubs and installing mailboxes and swing sets. It doesn’t matter how modest the project is, accidentally hitting an underground utility line or other facility can cause harm to you and those around you. This April marks the 10-year anniversary of 811. Over the last 10 years, the 811 call center has helped ensure the safety of people carrying out digging projects nationwide. As part of the 10-year anniversary celebration, representatives from the Pipeline and Hazardous Materials Safety Administration (PHMSA) attended the Common Ground Alliance (CGA) Safety Conference & Expo in Florida last month. The CGA conference is the nation’s largest educational
and networking event in the utility damage prevention community. This year, the CGA recognized the 10th anniversary of the Call 811 campaign and phone number and presented PHMSA with the 2016 CGA Presidents Corporate Award of Excellence for its leadership of this important safety initiative. Visit call811.com to learn more about safe digging or use the #call811 hashtag on Twitter or Facebook to see what everyone else is saying about safe digging throughout the month of April. Most importantly, don’t forget that you’re required to call 811 48 to 72 hours before any digging project to help ensure safety and prevent threats to underground facilities. There is no cost to you, so Call 811 Before You Dig. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Susan Connolly, executive vice president & COO of Foley Incorporated announced that Jim Kolakowski has joined the company as chief financial officer, reporting directly to her. Kolakowski spent the last 11 years at TRAC Intermodal, a business that provides intermodal equipment and management services for domestic and international shippers. For the last eight years, he served as vice president of financial planning and analysis for the company. Prior to that, Kolakowski worked with FTI Consulting and PWC in their corporate restructuring area. As chief financial officer of Foley Inc., Kolakowski is responsible for all financial aspects of the business, including banking relationships and legal and insurance matters. He will be responsible for both internal and external financial reporting and Foley’s corporate tax filings. In addition to all of these tasks, he will also be overseeing all functions of the Accounting and IT Departments. “We are excited about the creation of a new CFO position to our organization and adding Jim to our executive leadership team. The knowledge and experience Jim brings with him will play a vital role as we work to further strengthen our vision, our mission and our values,” Connolly said.
Construction employment increased by 6,000 jobs in March as a February hiring surge prompted by mild winter weather in much of the country prompted firms to hire fewer people, according to an analysis of new government data by the Associated General Contractors of America. Association officials said declining public-sector investments in construction and infrastructure could impact future construction hiring unless the administration and Congress enact a new funding measure. “Construction firms continued to add jobs over the past year at a higher rate than the overall economy,” said Ken Simonson, the association’s chief economist. “The small job gain in March most likely reflects ‘payback’ for unusually large hiring in February rather than a flattening of demand for projects. However, there has been a slowdown in public investment in highways and other infrastructure that could undermine construction hiring this year.” Construction employment totaled 6,882,000 in March, an increase of 6,000 from the February total and an increase of 177,000 or 2.6 percent from a year ago. The year-over-year growth rate was almost double the 1.5 percent rise in total nonfarm payroll employment, Simonson noted. The increase followed a jump of 59,000 jobs in February — the largest one-month rise in 11 years. Residential construction — comprising residential building and specialty trade contractors — lost 7,600 jobs in March but is up by 112,600, or 4.4 percent, compared to a year ago. Nonresidential construction (building, specialty trades, and heavy and civil engineering construction) employment increased by 13,300 employees in March and 63,500 employees, or 1.5 percent, over 12 months. However, employment in the portion of the industry that performs most infrastructure work — heavy and civil engineering construction — increased by only 4,100 over the month and 3,600 or 0.4 percent over the past 12 months. Association officials noted the latest construction spending figures from February show that public-sector construction spending declined by 8 percent during the past 12 months. They cautioned that continued declines on publicsector construction activity are likely to impact future hiring trends. As a result, they urged Trump administration officials and members of Congress to work together to craft and enact a new infrastructure funding package, as the President has promised to do. “The President appears to understand the wisdom of making new investments in our aging infrastructure, and it is essential that he demonstrate that understanding with proposals that include sustained funding,” said Stephen E. Sandherr, the association’s chief executive officer. “Finding a way to improve our nation’s crumbling infrastructure won’t just lead to more construction jobs, it will provide a needed boost to our broader economy by making most aspects of business more efficient and less costly.” For more information, visit www.acg.org.
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Foley Incorporated Introduces Jim Kolakowski as Chief Financial Officer Jim Kolakowski
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 51
CLOSE TO OUR CUSTOMERS
ELLIOTT & FRANTZ, INC. WWW.ELLIOTTFRANTZ.COM 10421 Guilford Road Jessup, MD 20794 301/725-7394 Fax: 301/725-7361 38420 Sussex Highway Delmar, DE 19940 302/846-3033 Fax: 302/846-0763 12051 Tac Court Manassas, VA 20109 703/257-2381 Fax: 703/257-2383 450 E. Church Road King of Prussia, PA 19406 610/279-5200 Fax: 610/279-6366
CLOSE TO OUR CUSTOMERS
Find out more: www.wirtgen-group.com
Page 52 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Complete inventory can be viewed at
www.secequipmentcorp.com DIGGING BUCKETS
YOUR SOURCE FOR
SALES
AND
RENTALS
CRAWLER TRUCKS, STUMP CUTTERS AND FORESTRY MULCHERS
12 TON EXCAVATOR 36” 39” 42” 45” $2500-$2800 20 TON EXCAVATOR 24” 39” 42” 43” 54” $2500-$3000 25 TON EXCAVATOR 24” 39” 42” 43” 48” 54” 60” $3000-$3500 30 TON EXCAVATOR 24” 36” 42” 45” 48” 54” 60” 65” 68” $3500-$4000 45 TON EXCAVATOR 60” 68” $5000-$5500
DITCHING BUCKETS 6 TON EXCAVATOR 58” 60” $1000 12 TON EXCAVATOR 63” 65” 68” $1200-1500 20 TON EXCAVATOR 72” 76” 80” $2800-$3000 25 TON EXCAVATOR 80” 83” $3200-$3500 30 TON EXCAVATOR 83” 86” $4000-$4500 45 TON EXCAVATOR 86” 90” $5000-$5500 BACKHOES 42” 45” 48” 50” $800
RIPPER 12 TON EXCAVATOR $1400 20 TON EXCAVATOR $1800 25 TON EXCAVATOR $2000 30 TON EXCAVATOR $2200 45 TON EXCAVATOR $3200
HYD. CONCRETE PULVERIZER 20 TON EXCAVATOR $6500 25 TON EXCAVATOR $7500
30 TON EXCAVATOR $8500 45 TON EXCAVATOR $9500
SKELETON BUCKET
NEW DESIGN
12 TON EXCAVATOR 45” 48” $3000 20 TON EXCAVATOR 51” 54” $3500 25 TON EXCAVATOR 60” $4200 30 TON EXCAVATOR 65” $4500 45 TON EXCAVATOR 72” $6700 (w/Teeth add $300)
LOADER BUCKET IT24-IT28 $3800 938F-G $4200 950E-F-G-H $5000 966D-E-F $5500 966G-H $6000 980G-H $7500 L70C-D-E $3200 L90C-D-E $3800 L120C-D-E $4500
HYD. TILTING BUCKETS 12 TON EXCAVATOR 65” 68” $2200-$2500 20 TON EXCAVATOR 72” 76” 80” $3500-$3800 25 TON EXCAVATOR 80” 83” $3500-4000 30 TON EXCAVATOR 83” 86” $5000-$5500
RAKE 12 TON EXCAVATOR 60” $2000 20 TON - 25 TON EXCAVATOR 60” 68” $2500 30 TON EXCAVATOR 80” $3000
SHEAR
DEMOLITION GRAPPLE
25t-35t SH4100 $45000
12 TON EXCAVATOR $3500 20 TON EXCAVATOR $4500 25 TON EXCAVATOR $5500 30 TON EXCAVATOR $6000 45 TON EXCAVATOR $8500
MULCHER 12 TON EXCAVATOR $9000 20 TON EXCAVATOR $10000
BRUSH CUTTER
HYDRAULIC THUMB
6 TON EXCAVATOR $3200 12 TON EXCAVATOR $3500 20 TON EXCAVATOR $3800 25 TON EXCAVATOR $4200
8T - 15T EXCAVATOR $2000 20T - 25T EXCAVATOR $2500 25T - 35T EXCAVATOR $3000
V-CONCRETE CRUSHER
FORGED TEETH
20 TON EXCAVATOR $9000 25 TON EXCAVATOR $11000 30 TON EXCAVATOR $15000 45 TON EXCAVATOR $18000
VIBRATING RIPPER 12 TON EXCAVATOR $3500 20 TON EXCAVATOR $4000 25 TON EXCAVATOR $4500 30 TON EXCAVATOR $5000
SKELETON LOADER BUCKET STARTS FROM $7000
BUCKET PINS 45MM-55MM $70 EACH 60MM-65MM $90 EACH 70MM $120 EACH 80MM $150 EACH 90MM $180 EACH 100MM $220 EACH 110MM $250 EACH
25 TON EXCAVATOR $15000 30 TON EXCAVATOR $18000
103302 $22.50 EACH 103352 $29 EACH
FACTORY DIRECT PRICES FOR ALL NEW EXCAVATOR AND WHEEL LOADER ATTACHMENTS!
VIBRATING SKELETON / SCREENING BUCKET
2650 S. La Cadena Drive. Colton, CA 92324 USA
909-284-8861
Connecticut Highway Toll Bill Clears Legislative Committee HARTFORD, Conn. (AP) A bill that could lead to electronic tolls along Connecticut’s highways is moving through the General Assembly. The Transportation Committee voted 1916 on March 17 in favor of the latest bill. It now awaits further action in the House of Representatives. Lawmakers have been debating for years whether to install tolls as a way to generate much-needed revenue for state transportation needs. Proponents say they’re needed because the state gas tax is not generating
enough revenue. Opponents said residents are already paying too much in taxes. Some lawmakers say their constituents don’t trust the General Assembly to spend the toll revenues on transportation needs. Under this year’s bill, the state gas tax would be reduced by 2.5 cents over five years to help alleviate having to pay a toll. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Keep Up With All the Industry News Subscribe to
CALL -
800.392.2686
VISIT -
Construction Equipment Guide Today! Toll Free 800/523-2200
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 53
Visit our website for more attachments!
www.nationalattachments.com
We have an Extensive Used Inventory!
Page 54 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Paving
SECTION
Pages 55-71
For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.
Advances of Vögele MT 3000-2i Increase Productivity The Vögele MT 3000-2i Offset PowerFeeder for the North American market is a powerful, innovative material transfer vehicle which provides uninterrupted, non-contacting transfer of asphalt mix, guaranteeing the maximum paving quality with the greatest possible cost efficiency, according to the manufacturer. With a large receiving hopper, a huge total storage capacity (material feeder and paver), and a peak conveying performance of 1,320 tons (1,200 t) per hour, this Vögele PowerFeeder can empty a full truckload in just 60 seconds. The conveyor of the MT 3000-2i Offset pivots to the left and right, opening up a wide range of possible applications. Its ErgoPlus operating system guarantees simple, reliable handling. Automatic distance control — combined with anticollision protection — eliminates the possibility of machine contact and ensures smooth transfer. Pivoting and Inclining Conveyor for High Versatility Pivoting 55 degrees to the left or right, the conveyor is a key factor behind the versatility of the MT 3000-2i Offset. The MT 3000-2i Offset powerfeeder combines quality with safety and cost-efficiency.
ing transfer and provides a clean and uniform flow. Tensioning cylinders guiding the rubber belt ensure center alignment of the belt. A smart automatic system accurately adjusts the belt tension as required. Innovative diesel heating keeps the conveyor at a consistent temperature to prevent the material from sticking.
The material conveying system counteracts thermal as well as mechanical segregation.
The maximum distance from the outside edge of the material feeder to the center of the discharge point is 11 ft. 6 in. (3.5 m). The conveyor also can be raised by up to 23 degrees from the horizontal to a discharge height of 12 ft. 9 in. (3.9 m). This allows the machine to be used in a wide range of applications, enabling high utilization. Pavers can be fed with material from the side, for example, when paving “hot to hot”. Backfilling trenches or filling cavities between safety barriers in highway construction can be done quickly and easily. Paving on shoulders and other hard-to-reach areas also is made easy. Moreover, the conveying concept has
been designed so that other materials such as topsoil, base course material or recycled material can be conveyed, in addition to asphalt. Maximum Conveying Capacity for Non-Stop Paving Due to the high-performance material conveying concept and the receiving hopper holding 15 tons (13.5 t), the MT 3000-2i Offset PowerFeeder can empty a 27.5-ton truck (25 t) in just 60 seconds. When combined with an asphalt paver, as much as 39 tons (35 t) of storage capacity is possible. The trough-shaped conveyor belt centers the material dur-
Material Management as a Success Factor Transverse conical augers homogenize all the material in the feeder’s receiving hopper by mixing the cooler asphalt from the sides with the warmer material from the middle of the hopper. The trough-shaped conveyor belt provides a uniform material flow, ensuring mix quality is maintained in every phase of the material transfer, according to the manufacturer. In order to ensure optimum material management, a specially developed diesel heating system with non-contact infrared panels maintains the correct temperature of the conveyor belt. The path of the material is pre-heated before the transfer of material begins. These technical measures complement each other, so the paving material is in an optimal condition when being placed. Non-Contact Material Feed Process The non-contact transfer of material is one of the key criteria for high paving quality. Decoupling the feeding from the paving process prevents jolts by feed trucks from being see PAVING page 64
Page 56 • April 19, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
S TEPHENSON E QUIPMENT, I NC .
Frederick, MD 21703 301-874-5500
South Plainfield, NJ 07080 908-753-8080
Delmar, MD 21875 410-546-1090
Fairfield, NJ 07004 973-227-2221
Jesco, Inc.
Lumberton, NJ 08048 609-267-2020
Deer Park, NY 11729 844-482-0910
White Plains, MD 20695 301-870-1438
Beacon, NY 12508 845-831-1800
Baltimore, MD 21237 410-687-1700
Middletown, DE 19709 302-376-0784
www.jesco.us
Stephenson Equipment, Inc.
C.N. Wood Co., Inc.
Philadelphia, PA 800-220-4033
Syracuse, NY 800-368-6455
Woburn, MA 781-935-1919
Whately, MA 413-665-7009
Harrisburg, PA 800-325-6455
Albany, NY 518-357-2200
Avon, MA 508-584-8484
Johnston, RI 401-942-9191
Wilkes-Barre, PA 866-667-6756
www.stephensonequipment.com
www.cn-wood.com
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • April 19, 2017 • Page 57
ANDERSON EQUIPMENT COMPANY 800-414-4554 www.andersonequip.com Pennsylvania Pittsburgh Cambridge Springs Clarion Clearfield Somerset Maine Bangor Gorham Farmington West Virginia Charleston Fairmont
New Hampshire Lancaster Manchester New York Buffalo Albany Endicott Olean Rochester Syracuse Watertown Vermont East Montpelier
ASPHALT CARE EQUIPMENT & SUPPLIES www.asphaltcare.com 2765 Galloway Road Bensalem, PA 19020 215-639-9800 800-223-1202 Fax: 215-639-9802
HARTER EQUIPMENT www.harterequipment.com 615 State Route 33 Millstone Township, NJ 732-446-7600 Fax: 732-446-9255
ASPHALT PAVING EQUIPMENT & SUPPLIES, INC. www.apeasi.com 412 Meco Dr. Wilmington, DE 19804 302-683-0105 26822 Lewes Georgetown Hwy. Harbeson, DE 19951 302-664-1552
Page 58 • April 19, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Terex Bid-Well Partners With Terex Materials Processing Now part of the Terex Materials Processing Systems (Terex MPS), Terex Bid-Well announced a strategic alliance with Terex MPS sales and support to grow its equipment sales and service beyond the U.S. market. The concrete paving equipment manufacturer will leverage synergies with the Terex MPS sales and certain distributor locations to significantly expand Terex Bid-Well’s global customer sales and support capabilities. “We are excited to work with the Terex MPS sales and distribution network, so we can offer a deeper level of customer sales and service for our versatile concrete paver design,” said Christal Dietzenbach, site director of Terex Bid-Well. “The experienced Terex MPS team already sells equipment that produces the material used to make the concrete paved by our equipment. We see many advantages for our customers by striking this relationship.” The partnership includes the full line of Terex Bid-Well concrete paving and placing equipment used for paving flatwork, overlays, parking lots, city streets, bridge decks, highways, airports, slopes and canals. Terex MPS representatives have completed extensive factory training covering the equipment’s design, features, capabilities and significant advantages. These representatives will work directly with paving contractors and Terex Bid-Well techni- The partnership includes the full line of Terex Bid-Well concrete paving and placing equipment used for paving flatwork, overlays, cians to help customers select the parking lots, city streets, bridge decks, highways, airports, slopes and canals. right equipment to efficiently fit their needs. truss frame. As bridge designs evolved over At a significantly lower purchase price system. This exclusive Terex Bid-Well fea“Customers in many global markets can the years, so too did the paver design. The than slipform pavers, the Terex Bid-Well ture imparts up to 5,000 vpm (83.3 Hz) over benefit from the quality increases and effi- floating strike-off pan was replaced by a sin- 5000 and 6000 airport and highway pavers the roller’s entire length to consolidate the ciency gains offered by the flexible Terex gle and then double roller strike-off configu- are built with the weight and frame rigidity top 2.5 in. (6.3 cm) of concrete, delivering a Bid-Well paver design. Contractors manual- ration. Terex Bid-Well also developed the to deliver high-production flatwork paving. denser and more uniformly consolidated ly hand-pouring flatwork and bridge deck patented Rota-Vibe system to improve con- Pin-connected frame inserts offer fast paving concrete surface, according to the manufacprojects can substantially improve ride crete density and uniformity of consolida- width changes from 12 to 68 ft. (3.6 to 20.7 turer. smoothness while significantly reducing tion. m), increasing paver uptime for more paving The Terex Bid-Well product offering also labor costs and time requirements by using The Terex paving equipment offering days in a season. Featuring leg end segments includes standard, heavy-duty and super Terex Bid-Well pavers,” Simon Croker, includes the Terex Bid-Well 2450, 3600 and that offer on-the-fly, variable-width paving, heavy-duty workbridge models that follow global product line director, Terex MPS said. 4800 pavers. Configurable with a range of the 5000 and 6500 pavers deliver cost-effi- the paver to bridge fresh concrete, allowing “Additionally, our paver can complete many options so virtually any bridge deck design cient paving of flared, parabolic and radius workers to finish the surface. Fully applications historically paved by concrete can be paved full-width, the paver’s carriage slabs up to 24 in. (61 cm) deep, according to adjustable features on Terex Bid-Well texturslipform pavers, but at a fraction of the can be equipped with an internal vibration the manufacturer. ing/curing machines perform both longitudiacquisition cost to lower long-term operating system so the machine can pave flatwork The flexible frame design of the Terex nal and transverse texturing/curing as well as costs. Plus the Terex Bid-Well paver offers applications such as parking lots, city streets Bid-Well 7000 pavers allow for paving full- transverse texturing and longitudinal curing. on-the-fly paving-width changes, which and county highways. The 2450 paver offers and half-width trapezoidal canals and The Terex Bid-Well CP240 Placer distribslipform pavers do not.” standard paving widths from 9 to 56 ft. (2.4 straight slopes reaching 45 degrees. With a utes concrete ahead of the paver at maxito 17.1 m), while the 3600 can pave standard base machine length of 30 ft. (9.1 m), the mum widths reaching 60 ft. (18.3 m) and Inventor, Innovator of Flexible widths reaching 96 ft. (26.2 m). The flagship pavers can be quickly expanded to meet up variable speeds of up to 700 fpm (213 mpm). Concrete Paving Equipment 4800 paver features standard variable paving to 84-ft. (25.6 m) paving widths. The power For more information, visit More than 55 years ago, Terex Bid-Well widths from 9 to 116 ft. (2.4 to 35.4 m), console and power unit on the paving car- www.terex.com/construction. invented the transverse bridge deck paver while available transition inserts increase riage tilt to remain level during operation. (This story also can be found on design that included an oscillating strike-off truss depth at the center to allow for paving All Terex Bid-Well pavers feature a robust Construction Equipment Guide’s website at pan riding along a 48-in (1219-mm) deep widths to expand up to 190 ft. (54.9 m). paving carriage that includes the Rota-Vibe www.constructionequipmentguide.com.)
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • April 19, 2017 • Page 59
AUTHENTIC. PROVEN. REFINED.
THE ORIGINAL IS STILL THE BEST The Roadtec “Shutttle Buggy” material transfer fer vehicle (MTV) provides un nequaled perfor formance to other o MTVs and is require ed extensively by government road departments worrldwide to achieve consistently high quality asphallt pavement. Pavement life fespan tests have shown thatt a temperature differential of less than seven deg grees Celsius in the mat behind the paver is key to eve en compaction and paveme ent durability. WITH H SHUTTLE BUGGY
Infrared imaging behind the Shuttle Buggy Buggy™ MTV M in tests conducted in the U.S. U S as well as in Europe e has shown that the machine easily and consistenttly remixes to achieve temp perature differential below the seven degree Celsius threshold. This proven per p formance has led not on nly to the machine’s populaarity all over the world, butt also allows contractors to earn maximum smoothnesss bonuses and win qualityy awards, while improving prroduction. WITHOUT SHUTTLE BUGGY
ACHIEVE YOU R BEST QUALITY TO ODA AY - VISIT ROADT EC.COM
© 2015 ROADTEC. INC. A ALL RIGHTS RESERVED
1 800 272 7100 1.800.272.
+1 423 265 0600 +1.423.265.0600
Page 60 • April 19, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
866-430-7539
www.jfwequipment.com sales@jfwequipment.com
Wacker Neuson Adds Special Edition 3-Ton Dumper to Line
Serving the Asphalt Industry for 30 Years
2010 Cat AP1055D track paver, Carlson EZIV-1019 electric heated screed, Cat C7 diesel engine, power crown, slope & height, self lubing system, power auger tunnels
2005 Blaw Knox PF 3200 paver, Omni IIIA 10-18 ½ ft screed w/diesel heat, power crown and slope, Cummins 5.9L diesel engine, power auger tunnels
2011 Laymor 8HC broom, tow hitch, Kubota diesel engine, 8 ft broom, 820 hrs
The larger capacity of the dumper, compared to a concrete buggy, allows contractors to transport 40 cu. ft. (1.1 cu m) of concrete per load, plus the dumper travels up to 14 mi. (22.5 km) per hour, making the concrete placement process faster and more efficient, reducing cycle times. 2010 Cat AP1000D paver, AS2302 screed 10-18 ft w/electric heat, Cat C7 diesel engine, power crown, slope & height, self lubing system, power auger tunnels, front wheel assist
2011 Volvo DD16 double drum 39” vibratory roller, Kubota 3 cylinder diesel engine, double drum drive, water system
New Marathon HEPR36 walk behind infrared heater, 3 ft x 3 ft, 360,000 BTU propane burner
1997 Rosco SPRH chip spreader, 10 ft spread hopper, Cummins 5.9L diesel engine, manual transmission, manual controls
New Marathon KERA10 walk behind crack sealer, 10 gallons, full wrap around oil jacket, manual full sweep agitation, propane burner, heated 1" discharge valve
New Marathon TPS250T tack distributor, Honda 11 hp gas engine, 18GPM pumping system, 250 gallons, 5 ft spray wand w/40 ft hose, 6 ft spray bar, operator’s platform, 10" filler lid, hose reel, propane burners, flushing system, electric brakes
3517 Wayne White Rd., Climax, NC 27233
Wacker Neuson is introducing a new special concrete edition of its 3-ton (2.7 t) dumper. The 3001 Concrete Edition is outfitted with a specially designed concrete chute that will allow delivery and placement of concrete to be faster and more efficient, according to the manufacturer. Wacker Neuson engineers, with the help of concrete contractors, designed the concrete chute and dumper’s special bucket shape to allow transport and placement of concrete with less spilling and precise placement while reducing splattering of the concrete. The metal chute has been shaped with high side walls to avoid spilling and the narrow shaped front enables precise pouring into the desired location. The 3001 bucket has been designed with special walls that are higher and tapered inward to avoid spilling while transporting concrete. The larger capacity of the dumper, compared to a concrete buggy, allows contractors to transport 40 cu. ft. (1.1 cu m) of concrete per load, plus the dumper travels up to 14 mi. (22.5 km) per hour, making the concrete placement process faster and more efficient, reducing cycle times. The dumper has a small foot print that reduces the risk of
rutting and by adding optional turf tires, the dumper will not disturb finished surfaces. Wacker Neuson’s 3001 dumper offers all-wheel hydrostatic drive that allows transportation over rough terrain and in remote areas where the concrete truck can’t access. The articulated steering allows for a tight turning radius which is especially beneficial in confined area sites. Further enhancing the precise placement of the concrete is the ability of bucket to swivel, allowing material to be unloaded from front or either side of the unit. The comfortable operator’s platform with foldable ROPS is easily accessible from both sides of the machine and is easy to drive with userfriendly controls. Wacker Neuson also offers the DW50, DW60 and DW90 dumpers. These professional material handling machines combine a compact design with powerful engines and hydrostatic all-wheel drive making them capable of hauling more in less time, reducing cycle times and increasing efficiency, according to the manufacturer. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • April 19, 2017 • Page 61
US MUNICIPAL SUPPLY INC. ALL ISLAND EQUIPMENT 39 Jersey Street West Babylon, NY 11704 631/643-2605 • Fax: 631/643-4060 allislandequipment.com
King of Prussia, PA 800/733-3776 www.usmuni.com
THE W.I. CLARK COMPANY JESCO 1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 • 800/321-8080 Fax: 973/575-5553 118 St. Nicholas Ave. S. Plainfield, NJ 07080 908/753-8080 • 800/241-7070 Fax: 908/753-7853 www.jesco.us
HOFFMAN EQUIPMENT COMPANY 1440 Route 9W Marlboro, NY 12542 845/236-3000 www.hoffmanequip.com
30 Barnes Ind. Pk. Rd. Wallingford, CT 06492 203/265-6781 • Fax: 203/294-1216 17 Eagle Road Danbury, CT 06810 203/775-1203 • Fax: 203/740-2579 80 Pratt Rd. Plainfield, CT 06374 860/546-4808 • Fax: 860/564-6928 www.wiclark.com
AMBROSE EQUIPMENT CO. 1401 Hooksett Rd. Hooksett, NH 03106 603/644-8787 1 Madison Street Plainville, MA 02762 508/643-0044 www.ambroseequipment.com
MONROE TRACTOR 1001 Lehigh Station Rd. Henrietta, NY 14467 585/334-3867 • 866/683-5338 5035 Genesee Street Buffalo, NY 14225 716/681-7100 • 800/834-9606 www.monroetractor.com
VALLEY SUPPLY & EQUIPMENT CO., INC. 20332 Leitersburg Pike Hagerstown, MD 21742 301/733-7414 1109 Middle River Rd. Baltimore, MD 21220 410/780-4000 www.valleysupplyequipment.com
STEPHENSON EQUIPMENT, INC. Harrisburg, PA 800/325-6455 Fax: 717/564-7580 Wilkes-Barre, PA 866/667-6756 Syracuse, NY 800/368-6455 Albany, NY 518/357-2200 www.stephensonequipment.com
796 Unionville Rd. Prospect, PA 16052 724/865-9221 2350 Munster Rd. Lilly, PA 15946 814/886-5191 walshequipmentinc.com
Page 62 • April 19, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
1-800-223-1202 I WWW.ASPHALTCARE.COM 2765 Galloway Road • Bensalem, PA 19020 WE SUPPLY PARTS FOR ATLAS COPCO/DYNAPAC, MARATHON EQUIPMENT, MAULDIN, BROCE BROOM, YANMAR, TOWMASTER, SNOWEX AND MANY OTHERS!!!
New & Used in Stock! $79,575 or Rent! MARATHON EQUIPMENT KEB-115T Under-Fired Road Repair Kettle, capable of melting asphalt cement, Used units starting at $5,018.
TE LOW RA ILABLE NG AVA I C N A N I F
$95,483
DYNAPAC CP1200 PNEUMATIC TIRE 2013 DYNAPAC CA2500 ROLLER Soil Compactor, Tract Control, 9 tires, water system, operating Smooth Drum, Cummins T4 lights, Cummins 74 hp., operating weight 12,650 lbs. / ballasted weight 26,400 lbs.
$111,080
$64,625
2015 MAULDIN 1750C-T-02 SILVER 16 PAVER Continues Ignite, Vandal Covers, Approx. 610 Hrs
2016 MAULDIN 690 F GRAVITY RUBBER TIRE 8’ to 13’ Screed
MARATHON ROAD EQUIPMENT IN STOCK!
Oil Jacketed Kettles, Hot Mix Transporters, Tack Distributors, AC-20 Kettles, and Infrared Asphalt Repair
Sandvik Designs Double TriSpec Tool for Rough Conditions Sandvik Mining and Rock Technology’s Double TriSpec tool is intended for use in extremely abrasive asphalt milling conditions. In road milling, the greatest cause of tool failure is known as body wash — the premature wearing away of the steel body that surrounds and supports the vital brazed-carbide insert in each of the tools on the milling drum. When body wash occurs, the tool’s steel body becomes vulnerable to failure, and the tool must be changed long before the carbide tip has been fully utilized — resulting in downtime, lost production and higher labor costs. Based on its TriSpec tools, which are designed with one carbide ring to prevent body wear, the Double TriSpec tool features an additional carbide ring. This additional ring, strategically located at the shoulder of the tool, prevents body wash and extends the life of the tool’s steel body. With no compromise on cutting speed, the design allows for maximum utilization of the carbide tip, which is able to wear evenly and
in proportion to the tools located across the drum. The new dual carbide ring design maintains puller groove performance throughout the life of the tool for easy removal, as it reduces wear on the washer and block. It also adds greater block protection, reducing costly block repair, according to the manufacturer. The Double TriSpec tools will fit any milling machine. Key Features • Strategically placed dual carbide rings prevents body wear, maximizing carbide tip use • Carbide rings also add greater block protection if tip is lost • Full sleeve retainer and washer maintain maximum block bore and seat protection • Improved thicker washer increases protection and wear life For more information, call 800/868-6657 or visit www.construction.sandvik.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
The Double TriSpec tool features an additional carbide ring. This additional ring, strategically located at the shoulder of the tool, prevents body wash and extends the life of the tool’s steel body.
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • April 19, 2017 • Page 63
Contact your local dealer: CHADWICK-BAROSS, INC. Bangor, ME 207.942.4838 Caribou, ME 207.498.2547 Westbrook, ME Contact your local 207.854.8411 Concord, dealer:NH 603.224.4063
Dealer Name
GEORGE ASSOCIATES, INC. Silver Spring, MD 301.589.9490 City, ST 123.456.7890 HIGHWAY EQUIPMENT & SUPPLY CO. City,PA ST Drums, 123.456.7890 570.788.1127 Ephrata, PA 717.859.3132 City, ST Harrisburg, PA 123.456.7890 717.564.3031 Lock Haven, PA City, ST 570.769.1070 123.456.7890 PENN JERSEY Deptford, NJ Dealer Name 856.227.6400 Frenchtown, NJ 908.824.4200 City,Island, ST NY Staten 123.456.7890 718.448.2444 Lionville, PA 610.363.9200 City, ST 123.456.7890 TYLER EQUIPMENT E. Longmeadow, MA City, ST 413.525.6351 123.456.7890 Berlin, CT 860.356.0840 City, ST VANTAGE EQUIPMENT 123.456.7890 Batavia, NY 585.344.1931 Latham, NY Name Dealer 518.220.9500 Syracuse, NY 315.437.2611 City, ST 123.456.7890 WOODCO MACHINERY Avon, MA City, ST 508.584.8484 123.456.7890 Woburn, MA 781.935.3377 Johnston, RI City, ST 401.942.9191 123.456.7890
Track a DENSITY IN RREAL TIME. PA SS:
PASS:
4
TEMPERATURE:
250°
D E N SITY:
5
T E M P E R AT U R E :
220°
D EN SITY:
95.1% %
94..2%
PASS:
2
TEMPERAT U R E :
270 0°
DENSITY:
92.6 6%
Volvo o olv Intelligent Compaction (IC) with Density Direct. Direct Volvo o olv has changed the game. Density Direct provides actual d density calculations in real tim me — eliminating guesswork and reducing reducing corre e sampling. Im Impr mprove mat quality, do it in less time, get yourr bonus, and win more contracts with Volv Volvo Density Direct. Learn more at volvoce.com/DensityDirect.
Page 64 • April 19, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
ErgoPlus Operating System Ensures Simple, Reliable Handling for Operator PAVING from page 55
transmitted to the paver. A non-contact distance control system ensures the correct space between the paver and the MT 3000-2i Offset, enhancing bonus-winning pavement smoothness. Three laser sensors permanently measure the space between the two machines, so the control system can automatically adjust the speed of the material transfer vehicle to that of the paver. The system also automatically prevents the paver from colliding with the feeder. If the material feeder has to stop unexpectedly, the paver also stops automatically as soon as the distance between the two machines falls below the set minimum. ErgoPlus Operating System The ErgoPlus operating system puts the feeder operator at the heart of things, guaranteeing comfort, safety and excellent visibility at all times, according to the manufacturer. The operator‘s stand — with its streamlined design — is well organized, offering the machine operator a professional workplace and an unobstructed view of all crucial points on the material feeder. The centerpiece is the feeder operator’s console. All the controls required for main and frequent functions are arranged in logical groups. Operation is intuitive and easy to learn. A joystick in the armrests of the two operator seats is used to pivot the proportionally controlled conveyor with the utmost precision and sensitivity. In fact, for the majority of applications only one person is needed to operate the material transfer vehicle. In complex feeding tasks, operation of the pivoting conveyor can be taken over by a second operator. Powerful Drive Technology The Deutz diesel engine delivering 215 hp (160 kW) at 2,000 rpm offers a perfect balance of power and fuel economy. Due to its sophisticated exhaust gas after-treatment, this engine complies with the U.S. Tier IV final emission standard. A fuel-saving ECO mode is available, sufficient for many applications. And even when working in ECO mode, the MT 3000-2i Offset still has a full 200 hp (150 kW) at its disposal. The large fuel tank holds 119 gal. (450 L) for more than a day’s work without a need for refueling.
turn almost on the spot and easily masters difficult terrain with inclines and slopes, according to the manufacturer. Easy Transport Transporting a material transfer vehicle is a cost factor that should not be underestimated. The Vögele PowerFeeder was designed from scratch for optimum transport, and that has a positive impact on costs. The transport height of 10 ft. 2 in. (3.1 m), the transport width of 9 ft. 10 in. (3 m) and the outer track gauge of 8 ft. 9 in. (2.66 m) are dimensioned so the MT 3000-2i Offset can easily be transported on a conventional low-bed trailer. Due to the machine’s low weight of 57,100 lbs. (25,900 kg), the material transfer vehicle is not too heavy for most roads, tunnels and bridges, and can reach its destination without special permits or time-consuming detours. For more information, visit www.wirtgengroup.com/america. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
ELLIOTT & FRANTZ, INC www.elliottfrantz.com 10421 Guilford Road • Jessup, MD 20794 301/725-7394 Fax: 301/725-7361 38420 Sussex Highway • Delmar, DE 19940 302/846-3033 Fax: 302/846-0763 12051 Tac Court • Manassas, VA 20109 703/257-2381 Fax: 703/257-2383 450 E. Church Road • King of Prussia, PA 19406 610/279-5200 Fax: 610/279-6366
MONROE TRACTOR www.monroetractor.com 1001 Lehigh Station Road • Henrietta, NY 14467 585/334-3867 Fax: 585/334-0001 5035 Genesee Street • Buffalo, NY 14225 716/681-7100 Toll Free: 800/834-9606 7300 Eastman Road • N. Syracuse, NY 13212 315/452-0000 Toll Free: 800/287-5286 110 Old Ithica Road • Elmira, NY 14845 607/739-8741 6 Equipment Drive • Binghamton, NY 13904 607/754-6570
EDWARD EHRBAR, INC. www.ehrbar.com 4 Executive Plaza • Yonkers, NY 10701 914/738-5100 Long Island 601 Coates Ave. • Holbrook, NY 11741 631/563-7600 New York City 718/626-3331 42 Kenosia Avenue • Danbury, CT 06810 203/743-0088 Fax: 203/743-0266
The pivoting and inclining conveyor is a key factor behind the versatility of the MT 3000-2i Offset PowerFeeder.
Mobile in Every Way A strong point of the Vögele MT 3000-2i Offset PowerFeeder is its continuous rubber tracks. Due to the large track width of 18 in. (45.7 cm), operating speeds up to 250 fpm (76 m/min) are possible. The large footprint also provides excellent flotation and tractive effort. The powerful, separate drives are integrated directly into the drive wheels of the rubber tracks, meaning that engine output is transmitted without loss of power. As a result, the PowerFeeder The joystick in the armrests of the operator’s seats permits intuitive conpushes any feed truck with ease. It can trol of the conveyor.
SCHMIDT EQUIPMENT INC. www.schmidtequipment.com 80 Southbridge Rd. • Route 20 • North Oxford, MA 01537 508/987-8786 • 800/922-8295 Fax: 508/987-3578 2397 GAR Highway • Rte 6 & 136 • North Swansea, MA 02777 508/379-9810 • 800/456-6885 Fax: 508/379-1160 88 Camelot Drive • Unit 42 • Plymouth, MA 02360 508/830-9997 • 800/916-0997 Fax: 508/830-1014 1620 Page Blvd • Springfield, MA 01104 413/543-5595 • 800/734-5594 Fax: 413/543-5871 10 Republic Road • North Billerica, MA 01862 978/667-4345 • 800/531-2266 Fax: 978/667-4810
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • April 19, 2017 • Page 65
A WIRTGEN GROUP COMPANY
Material Transfer Vehicle: MT 3000-2i Offset PowerFeeder.
TECHNICAL HIGHLIGHTS > High-performance material feeder to empty a 27.5 tons truck in just 60 seconds
> Material conveying system counteracts thermal as well as mechanical segregation
> Pivoting and inclining conveyor for high versatility > Automatic distance control system > ErgoPlus operating system for all-around visibility and intuitive controls
www.wirtgen-group.com/america
WIRTGEN AMERICA, INC. · 6030 Dana Way · Antioch, TN 37013 · Telephone: 615-501-0600 GROFF TRACTOR & EQUIPMENT, INC. www.grofftractor.com 6779 Carlisle Pike Mechanicsburg, PA 17050 800/33-GROFF 800/33-(47633) 20 Stauffer Lane Ephrata, PA 17522 888/66-GROFF 888/66-(47633)
210 Rolling Ridge Drive Bellefonte, PA 16823 888/47-GROFF 888/47-(47633) 100 Smith Drive Cranberry Twp., PA 16066 877/33-GROFF 877/33-(47633)
963 South Center Avenue New Stanton, PA 15672 888/82-GROFF 888/82-(47633) 4355 Admiral Peary Hwy Ebensburg, PA 15931 877-97-GROFF 877-97-(47633)
CENTRAL EQUIPMENT COMPANY www.centralequipmentco.com 45 Dempsey-Greaves Lane Stillwater, ME 04489 800/479-6193 Fax: 207/827-3774
THE W.I. CLARK CO.
KOMATSU NORTHEAST
www.wiclark.com 30 Barnes Industrial Park Rd. Wallingford, CT 06801 203/265-6781 Fax 203/294-1216
www.komatsune.com 2820 Hamilton Blvd. South Plainfield, NJ 07080 908/561-9000
17 Eagle Road Danbury, CT 06810 203/775-1203 80 Pratt Road Plainfield, CT 06374 860/546-4808
201 North Route 73 Winslow Township, NJ 08095 856/767-5900
Page 66 • April 19, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Bomag Unveils Compact Single Direction Plate Compactor Bomag single direction vibratory plate compactors are a contractor’s indispensable tools for day-to-day use in soil and asphalt repair and maintenance compaction applications. Weighing just over 100 lb. (46 kg), the Bomag BVP 10/30 compactor is the lightest single direction vibratory plate in its class and features a balanced lifting point, so it can be quickly loaded and unloaded from the transport vehicle without any support equipment, according to the manufacturer. While small in size, the BVP 10/30 vibratory plate delivers on compaction performance. This flexible walk-behind compactor boasts a compact design with its 11.8- by 20-in. (30 by 50.8 cm) plate width and length, making it perfect for compacting confined spaces and into corners. The productive machine generates 2,250 lb. (10 kN) centrifugal force at working speeds reaching 82 ft./min. (25 m/min.), making it the right plate for landscaping and earthworks contractors, building contractors and maintenance crews. By equipping the plate with its optional vulcolan mat, the BVP 10/30 is the compactor of choice for setting paving stones. The new vibratory plate incorporates many field-proven Bomag design features that deliver
reliable operation to reduce long-term operating costs. Rubber buffer mounting of the 2.8-hp (2.1 kW) Honda gas engine minimizes damaging vibration feedback to the engine to maximize service life, while the low oil alert feature automatically turns off the engine before major component damage can occur. Built tough, the BVP 10/30 features a maintenance free exciter to reduce service time. The machine’s enclosed Vbelt guard keeps material from entering the chamber for a longer service life with fewer repairs. Several features of the BVP 10/30 plate compactor serve to enhance safe machine operation. Its hinged handle features rubber mounts to effectively minimize vibration transmitted back to the operator’s hands and arms for more comfortable operation. The V-belt guard fully encloses the belt’s movement to protect the operator from injury. Compactor lifting handles help to advance safe loading and unloading from the transport vehicle. For more information, call 803/337-0700 or visit www.bomag.com/us. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
The BVP 10/30 vibratory plate boasts a compact design with its 11.8- by 20-in. (30 by 50.8 cm) plate width and length. The productive machine generates 2,250 lb. (10 kN) centrifugal force at working speeds reaching 82 ft./min. (25 m/min.), making it the right plate for landscaping and earthworks contractors, building contractors and maintenance crews.
Case Debuts SV208 Single Drum Vibratory Soil Compactor Case Construction Equipment introduced the SV208D single drum vibratory compactor — compatible with both smooth and padfoot drums. The SV208D is able to climb grades of up to 65 percent due to a low-centerof-gravity axle-free design and a hightraction hydrostatic drive system that provides constant power to the wheels and drum with an electronic self-adjusting torque control system. The machine’s new 74.3 hp Tier IV Final engine also delivers greater torque than previous models. Best-in-class centrifugal force allows for higher lifts and deeper compaction depths completed in fewer passes for increased productivity. Performance on rough, uneven terrain is improved with an oscillating articulated roller joint that maintains consistent drum-to-ground contact, and a superior drum design reduces drift and maintains constant compaction throughout each rotation, according to the manufacturer. Comfort & Visibility Available in both open and cab configurations, the SV208D features a spacious, comfortable and intuitive opera-
tor environment with an adjustable seat that swivels up to 50 degrees, providing enhanced visibility of the drum surface. Rear visibility is maximized with a sloped rear deck design. The ROPS and roof in the open platform design can be disassembled and lowered for easier transport. Serviceability Like all Case machines, the SV208D is designed for groundline serviceability. An easy-to-lift engine cover provides easy access at ground level to all fluid ports, drains, service checkpoints and filters for simplified maintenance. The SV208 also features an onboard diagnostics system that calculates when service is needed based on how the machine has been run, i.e. if the machine has spent more time in low idle, the system will extend out its service interval. For more information, visit CaseCE.com. The SV208D is able to climb grades of up to 65 percent due to a low-center-of-gravity axle-free design and a high-traction hydrostatic drive system that provides constant power to the wheels and drum with an electronic self-adjusting torque control system.
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • April 19, 2017 • Page 67
39 Jersey Street West Babylon, NY 11704 631/643-2605 Fax: 631/643-4060 www.allislandequipment.com
1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080 Fax: 973/575-5553 118 St. Nicholas Ave. S. Plainfield, NJ 07080 908/753-8080 800/241-7070 Fax: 908/753-7853 www.jesco.us
1440 Route 9W Marlboro, NY 12542 845/236-3000 www.hoffmanequip.com
1001 Lehigh Station Road Henrietta, NY 14467 585/334-3867 866/683-5338 5035 Genesee Street Buffalo, NY 14225 716/681-7100 800/834-9606 monroetractor.com
1701 Roseneath Rd., Richmond, VA 23230 804/359-4048 www.richmondmachinery.com
Harrisburg, PA 800/325-6455 Fax: 717/564-7580 Wilkes-Barre, PA 866/667-6756 Syracuse, NY 800/368-6455
THE W.I. CLARK COMPANY
Albany, NY 518/357-2200 www.stephensonequipment.com
30 Barnes Ind. Pk. Rd. Wallingford, CT 06492 203/265-6781 Fax: 203/294-1216 17 Eagle Road Danbury, CT 06810 203/775-1203 Fax: 203/740-2579 80 Pratt Rd. Plainfield, CT 06374 860/546-4808 Fax: 860/564-6928 www.wiclark.com
King of Prussia, PA 800/733-3776 www.usmuni.com
20332 Leitersburg Pike Hagerstown, MD 21742 301/733-7414 1109 Middle River Rd. Baltimore, MD 21220 410/780-4000 www.valleysupplyequipment.com
796 Unionville Rd. Prospect, PA 16052 724/865-9221 2350 Munster Rd. Lilly, PA 15946 814/886-5191 walshequipmentinc.com
Page 68 • April 19, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Atlas Copco Introduces Its Generation VI Asphalt Rollers The Atlas Copco CC4200VI, CC5200VI and CC6200VI articulated tandem rollers feature LED lights and temperature sensors on the front and rear rollers so operators can better manage temperature drop while compacting.
PLEASE CONTACT YOUR BAGELA ASPHALT RECYCLER DEALER:
www.ehrbar.com
Yonkers, NY
www.centralequipmentco.com
4 Executive Plaza, Yonkers, NY 10701 914-738-5100
Stillwater, ME 45 Dempsey-Greaves Lane, Stillwater, ME 04489 800-479-6193 Fax: 207-827-3774
Holbrook, NY 601 Coates Ave., Holbrook, NY 11741 631-563-7600
Gorham, ME 54 Olde Canal Way, Gorham, ME 04038 800-479-6193
Danbury, CT 42 Kenosia Ave., Danbury, CT 06810 203-743-0088
Construction, Crane & Tractor www.constructioncraneandtractor.com
Folcroft, PA 1545 Hook Rd., Folcroft, PA 19032 610-586-2710
Piscataway, NJ 300A S. Randolphville Rd., Piscataway, NJ 08855 732-752-2828
US Distributor www.pavementrecyclers.com
70 Platt Road Shelton, CT 06484 203-944-0525
Atlas Copco has introduced its Generation VI rollers — the CC4200VI, CC5200VI and CC6200VI. The new articulated tandem rollers feature temperature sensors on the front and rear rollers so operators can better manage temperature drop while compacting. Atlas Copco also offers the units with a 3year package to its telematics system, FleetLink Advanced. The system allows users to optimize fleet usage, reduce maintenance costs and save time and money The Dynapac CC4200VI, CC5200VI and CC6200VI feature Tier IV engines and are available with Atlas Copco’s optional ECO Mode system. ECO Mode is an rpm-management system that delivers to the rollers only the amount of power that is necessary to operate at any given time. This system can reduce fuel consumption by as much as 20 percent, according to the manufacturer. Atlas Copco has redesigned the big double drum rollers for generation VI with long lasting LED lights to enhance the rollers’ simple maintenance, and service points that are fast and easy to access. This includes positioning the engine on the rear module and incorporating large, easy to-open engine hoods. Servicing information displays directly on the driver’s 7-in. LCD touch screen and also indicates what servicing needs to be completed. All rollers feature a lubrication-free steering hitch and steering cylinder. The units’ FleetLink Advanced system records the location of the equipment and working hours while allowing users to monitor each machine’s parameters and performance every minute. It also includes a tool to
set one or more geo-fences for a single machine or a group of machines. The FleetLink package includes a hardware module, access to an online fleet management portal, and a monthly connection package subscription, which customers can extend after the three years. The double drum rollers also feature a corrosion-free water tank and sprinkler tubes, in combination with easily accessible filters for enhanced reliability and easy maintenance. Contractors can replace hydraulic hoses in individual segments, saving from the hassle and costs associated with replacing full lengths of the hoses. The rollers enhance productivity by maximizing operator visibility and comfort. They feature a sideways-sliding seat and steering module that also rotate with the operator, which helps improve visibility for optimal control and compaction. And since the engine is located at the back of the roller there is less heat and noise affecting the operator. The Dynapac CC4200VI is available with a Combi module placed at the rear of the unit and offset steering to further improve top layer texture. The Atlas Copco Dynapac CC4200VI, CC5200VI and CC6200VI are built with parts similar to other Atlas Copco equipment. This means less inventory for dealers and parts that are readily available for fast turnaround times and less downtime. For more information, call 800/732-6762 or visit www.atlascopco.us. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • April 19, 2017 • Page 69
MT-300
690-G
t
1550-D
Products shown with optional equipment.
MAULDIN Paving Products is dedicated to developing products that exceed expectations. See for yourself what makes the industry’s heaviest screed lay down the Superior mats your company desires. With over 10 years under the belt of proven results, the Silver-16 Screed is better than ever.
MAULDIN Paving Products... MASTERS OF THE MAT! Contact your MAULDIN dealership today and review all the choices available from the MAULDIN 1750-C 2I¿ FLDO &DWDORJ WR VSHF RXW D & WKDW SHUIHFWO\ PDWFKHV \RXU SDYLQJ SUHIHUHQFHV d
GEORGE
ASSOCIATES, INC. Construction and Industrial Equipment
2340 Montgomery George Associates, Inc. Street Silver Spring, MD 20910
P Fax: 301-588-6605
2340 Montgomery St. Silver Spring, MD 20910 (301) 589-9490 Fax: (301) 588-6605 www.georgeassociates.info
Asphalt Care Equipment & Supplies 2765 Galloway Road Bensalem, PA 19020 (215) 639-9800 (800) 223-1202 Fax: (215) 639-9802 www.asphaltcare.com
Woodco Machinery
East PBE Inc.
www.woodcomachinery.com
283 Pane Rd. Newington, CT 06111 (860) 665-7470 Fax: (860) 665-7478 www.pbeinc.com
60 Shun Pike Johnston, RI 02919 (401) 942-9191 Fax: (401) 942-9266
140 Wales Avenue Avon, MA 02322 (781) 935-3377 Fax: (781) 935-1563
22 North Maple Street Woburn, MA 01801 (781) 935-3377 Fax: (781) 935-1563
Vantage Equipment 5985 Court St. Rd. Syracuse, NY 13206 (315) 437-2611 17 Northway Lane Latham, NY 12110 (518) 220-9500 4554 W. Saile Dr. Batavia, NY 14020 (585) 344-1931 www.vantageeq.com
Page 70 • April 19, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Allen Introduces Its New 255T4 Triple Roller Tube Paver Allen, a leader in site prep and concrete placing and finishing equipment, announced the debut of its newest form riding paver. The 255T4 is a high production, triple roller tube paver that is great for concrete streets, parking lots, shoulders, ramps, approaches, airfields and more, according to the manufacturer. The Allen 255T4 is a Tier IV Final diesel powered paver that can do the work of larger more expensive pavers in many applications. This paver is easy to transport and setup due to having a lighter weight than traditional slip-form pavers. The 255T4 also supports our optional gang vibration system which helps properly consolidate the concrete during the paving process. 255T4 standard features include: • 49.5 hp Hatz 4H50TIC (T4F) Diesel engine • Three precision engineered and level-tested roller tubes • Heavy duty sectionalized over-head truss system provides rigidity while allowing easy width changes • Spray system allows fogging of screeding tubes and also useful for quick clean up • Easy-to-use controls make operator training simple For more information, visit www.alleneng.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
The 255T4 is a high production, triple roller tube paver that is great for concrete streets, parking lots, shoulders, ramps, approaches, airfields and more, according to the manufacturer.
Introducing the GP3, the World’s Most Intelligent Paver
info@gomaco.com ❘❘ www.gomaco.com info@gomaco.com www.gomaco.com CONCRETE STREETS AND HIGHWAYS ❘ AIRPORT RUNWAYS ❘ CURB AND GUTTER ❘ SIDEWALKS RECREATIONAL TRAILS ❘ SAFETY BARRIER ❘ BRIDGE PARAPET ❘ BRIDGE DECKS ❘ IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA ❘ 712-364-3347
Murrysville, PA
Somerset, PA
724/327-1300
814/445-7915
Lantz Corners, (Kane), PA
Cranberry Twp., PA
814/778-5250
724/776-1400
Clearfield, PA
Erie, PA
Clarksburg, WV
814/765-1611
814/898-3388
304/842-2222
www.clevelandbrothers.com
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • April 19, 2017 • Page 71
A. Montano Co, Inc. 571 Route 212 • Saugerties, NY 12477 845/247-0206 • Fax: 845/247-9321 www.amontano.com
Ambrose Equipment Co. 1401 Hooksett Road • Hooksett, NH 03106 603-644-8787 • Fax: 603-644-8747 1 Madison Street • Plainville, MA 02762 508-643-0044 • Fax: 508-643-0034 www.ambroseequipment.com
E.W. Sleeper Company, Inc. 391 Loudon Rd. • Concord, NH 03302 603/225-3361 • 800/358-6007 Fax: 603/225-4918 www.ewsleeper.com
Groff Tractor New Jersey, LLC 551 N. Harding Highway • Vineland, NJ 08630 800-874-2650 212 Monmouth Rd. • Freehold, NJ 07728 800-874-2659 200 Bomont Place • Totowa, NJ 07512 800-558-7426 www.grofftractor.com
Highway Equipment Company 22035 Perry Highway • Zelienople, PA 16063 724/452-7800 • Fax: 724/452-7030 McKean, PA 814/476-7755 Dubois, PA 814/371-3600 www.highway-equipment.com
Midlantic Machinery 2240 Bethlehem Pike • Hatfield, PA 19440 215-822-0145 • Fax: 215-822-7971 6375 Allentown Blvd. • Harrisburg, PA 17112 717-652-3190 • Fax: 717-540-0251 1261 Highway 315 • Wilkes Barre, PA 18702 570-824-9891 • Fax: 570-822-3561 6 S. Eleanor Ave. • Frackville, PA 17931 570-874-6140 • Fax: 570-874-4200 1400 Joh Avenue • Baltimore, MD 21227 410-247-2100 • Fax: 443-543-0344 28587 Sussex Hwy. • Laurel, DE 19956 302-715-5382 • Fax: 302-715-5384 www.midlanticmachinery.com
Tracey Road Equipment Syracuse 6803 Manlius Center Rd • East Syracuse, NY 13057 315-437-1471 Binghamton 1523 Route 11 North • Kirkwood, NY 13795 607-775-5010 Rochester 300 Middle Rd • Henrietta, NY 14467 585-334-5120 Watertown 19598 Cady Road • Adams Center, NY 13606 315-788-0200 Albany 115 Railroad Ave. • Albany, NY 12205 518-438-1100 www.traceyroad.com
www.sakaiamerica.com (800) 323-0535
Page 72 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Contact your local dealer: Chadwick-BaRoss Westbrook, ME 207.854.8411
Penn-Jersey Deptford, NJ 856.227.6400
Bangor, ME Frenchtown, NJ Contact your local dealer:908.824.4200 207.942.4838 Caribou, ME Dealer Name 207.498.2547
Lionville, PA Dealer Name 610.363.9200
Concord, NH City, ST 603.224.4063
Staten Island, NY City, ST 718-448-2444
Highway Equipment & City, ST Supply Co. 123.456.7890 Harrisburg, PA 717.564.3031
Rudd City, ST PA Pittsburgh, 123.456.7890 412.741.1731
123.456.7890
City, ST
Drums, PA 123.456.7890 570.788.1127 Ephrata, PA City, ST 717.859.3132
123.456.7890
Lock Haven, PA 570.769.1070 Dealer Name
Malvese Hicksville, City, ST NY 516.681.7600 123.456.7890 Riverhead, NY City, ST 631.369.1147 123.456.7890
McClung Logan Equipment City, ST Company, Inc.123.456.7890 Baltimore, MD 410.242.6500 City, ST Manassas, VA 123.456.7890 703.393.7344 Winchester, VA Dealer Name 540.722.3700 Chesapeake, VA City, ST 757.485.3314 123.456.7890 Richmond, VA City, ST 804.266.0000 123.456.7890 Roanoke, VA
540.989.3750 City, ST
Wise, VA 123.456.7890 276.328.8027 Bridgeville, City, ST DE 302-337-3400 123.456.7890
123.456.7890
Clearfield, PA City, ST 814.765.8500
123.456.7890
Louisville, KY 502.456.4050 City, ST
Charleston, WV 123.456.7890 304.755.7788 Dealer Name Tyler Equipment East Longmeadow, MA 413.525.6351 City, ST 123.456.7890 Berlin, CT 860.356.0840 City, ST
Vantage Equipment 123.456.7890 Latham, NY 518.220.9500 City, ST 123.456.7890 Batavia, NY 585.344.1931 City, ST
Syracuse, NY 123.456.7890 315.437.2611 Woodco Machinery Dealer Name Woburn, MA 781.935.3377 City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890
Some c companies ha h ve you ch hoose power o or fuel efficiiency. Yo ou c chose both.
City, ST 123.456.7890
Volvo olv developed the ind dustry’s first fuel efficiency guar guarantee so you never haavve to compromise on performance or prod ductivity. And with CareT Trrac ck machine monitoring, you can focus f your attention on more impo ortant things — like growing your business. T Talk alk to us today oday, or get the details at volvoce.com/smar m/smartfuel.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 73
Page 74 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Page 76 • April 19, 2017 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide
www.gehl.com
ADMAR CONSTRUCTION EQUIPMENT & SUPPLIES sales@admarsupply.com www.admarsupply.com 878 Old Albany Shaker Road Latham, NY 12110 518/690-0750 Fax: 518/690-0757
3001 West 17th Street Erie, PA 16505 814/833-7761 Fax: 814/838-5048
449 Commerce Road Vestal, NY 13850 607/798-0333 Fax: 607/798-0833
1950 Brighton Henrietta Town Line Road Rochester, NY 14623 585/272-9390 Fax: 585/272-9165
1394 Military Road Tonawanda, NY 14217 716/873-8000 Fax: 716/873-8455 2390 Rochester Road Canandaigua, NY 14424 585/396-0031 Fax: 585/396-0038
7800 Brewerton Road Cicero, NY 13039 315/433-5000 Fax: 315/431-0548 121 Armstrong Road Pittston, PA 18640 570/299-5505 Fax: 570/299-5504
NORRIS SALES COMPANY www.NorrisSales.com 1010 Conshohocken Rd. Conshohocken, PA 19428 610/279-5777 Fax: 610/279-7973 1-800/457-RENT (7368) 668 Berlin Cross Keys Road Sicklerville, NJ 08081 856/740-1400 Fax: 856/740-1940 866/80-TOOLS (86657)
MIDLANTIC MACHINERY www.midlanticmachinery.com 2240 Bethlehem Pike 6 S. Eleanor Ave. Hatfield, PA 19440 Frackville, PA 17931 215/822-0145 570/874-6140 Fax: 215/822-7971 Fax: 570/874-4200 6375 Allentown Blvd. Harrisburg, PA 17112 717/652-3190 Fax: 717/540-0251
1400 Joh Avenue Baltimore, MD 21227 410/247-2100 Fax: 443/543-0344
1261 Highway 315 Wilkes Barre, PA 18702 570/824-9891 Fax: 570/822-3561
28587 Sussex Hwy. Laurel, DE 19956 302/715-5382 Fax: 302/715-5384
ALL ISLAND EQUIPMENT www.allislandequipment.com 39 Jersey Street West Babylon, NY 11704 631-643-2605 Fax: 631-643-4060
Construction Equipment Guide • Skid Steers, Compact Track Loaders & Attachments Section • www.constructionequipmentguide.com • April 19, 2017 • Page 77
ENGINEERED TO WORK ONLY TWO SHIFTS. DAY AND NIGHT.
F&W EQUIPMENT www.fwequip.com 164 Boston Post Road Orange, CT 06477 203-795-0591
ADMAR Construction Equipment & Supplies www.admarsupply.com 800-836-2367 449 Commerce Rd. Vestal, NY 13850 607-798-0333 1394 Military Rd. Buffalo, NY 14217 716-873-8000 2390 Rochester Rd. Canandaigua, NY 14424 585-396-0031 1950 Brighton-Henrietta Town Line Rd. Rochester, NY 14623 585-272-9390
Reliable. Durable. Muscle-bound. The Kubota SVL Compact Track Loaders are model employees. And models of engineering. Featuring proven Kubota engines, best-in-class breakout force and a smooth ride, they show up ready to work, day in and day out.
ERB & HENRY EQUIP. INC. www.erbhenry.com 22-26 Henry Ave. New Berlinville, PA 19545 610-367-2169
© Kubota Tractor Corporation, 2016.
HARTER EQUIPMENT, INC. www.harterequipment.com 615 State Route 33 Millstone Twp, NJ 08535 732-446-7600 866-379-6326 Fax: 732-446-9255
ABLE Equipment Rental Kubota Sales & Rentals 1050 Grand Blvd. Deer Park, NY 11729 866-468-2666 631-841-3333 www.ableequipment.com
7800 Brewerton Rd. Cicero, NY 13039 315-433-5000
CHAPPELL TRACTOR SALES www.chappelltractor.com 454 Route 13 South P.O. Box 424 Milford, NH 03055 603-673-2640 Fax: 603-672-0019
Page 78 • April 19, 2017 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide
MODEL
OPERATING LOAD LBS. (KG)
ENGINE POWER HP (KW)
OPERATING WIDTH IN. (CM)
WACKER NEUSON SW16 SW17 SW20 SW21 SW 24 SW 28
1,600 (725) 1,700 (771) 2,000 (907) 2,100 (952) 2,350 (1,065) 2,800 (1,270)
56 (42) 74 (55) 56 (42) 74 (55) 74.3 (55.4) 74.3 (55.4)
65.9 (167 65.9 (167 65.9 (167 65.9 (167 72 (183) 72 (183)
CTL/MTL MODEL ST28 ST31 ST 35 ST 45
2,800 (1,270) 3,100 (1,406) 3,500 (1,587) 4,500 (2,041)
74 (55) 74 (55) 74.3 (55.4) 74.3 (55.4)
67.1 (170) 67.1 (170) 78 (198) 78 (198)
JOHN DEERE 312GR 314G 316GR 318G 320E 324E 330G 332G
1,550 (704) 1,760 (799) 1,750 (795) 1,945 (883) 2,190 (994) 2690 (1221) 3000 (1362) 3600 (1633)
48 (35.8) 48 (35.8) 61 (45.6) 61 (45.6) 69 (51.7) 74 (54.8) 91.2 (68) 100 (74.6)
62.9 (160) 62.9 (160) 62.9 (160) 62.9 (160) 69.2 (176) 69.8 (177) 78 (198) 78.4 (199)
see CHART page 94
TH
OPERATING LOAD LBS. (KG)
MODEL
ENGINE POWER HP (KW)
LAR
CATERPIL SSL MODEL 226D 232D 236D 242D 246D 262D 272D2 272D2 XHP DEL CTL/MTL MO 239D 249D 257D 259D 279D 277D 289D 287D 297D2 297D2 XHP 299D2 299D2 XHP
CASE SR130 SR160 SR175 SV185 SR210 SR240 SR270 SV280 SV300 SV340 CTL MODEL TR270 TR310 TR340 TV380
1,550 (703) 1,850 (839) 1,800 (817) 2,150 (975) 2,150 (975) 2,700 (1,225) 3,400 (1,542) 3,650 (1,656) 2,050 (930) 2,300 (1,043) 2,800 (1,270) 2,900 (1,315) 2,935 (1,331) 3,290 (1,492) 3,800 (1,724) 4,000 (1,814) 4,700 (2,132) 4,800 (2,177) 4,600 (2,087) 4,725 (2,143)
1,300 (590) 1,600 (726) 1,750 (790) 1,850 (840) 2,100 (953) 2,400 (1,008) 2,700 (1,224) 2,800 (1,270) 3,000 (1364) 3,400 (1,545) 2,700 (1,225) 3,100 (1,406) 3,400 (1,542) 3,800 (1,723)
TH OPERATING WID IN. (CM)
JCB 60 (152) 60 (152) 66 (168) 66 (168) 66 (168) 66 (168) 72 (183) 76 (193)
60 (45) 60 (45) 73 (54) 73 (54) 73 (54) 73 (54) 95 (71) 106 (79) 60 (45) 60 (45) 73 (54) 73 (54) 73 (54) 73 (54) 73 (54) 73 (54) 95 (71) 106 (79) 95 (71) 106 (79)
49 (36.4) 60 (44.7) 67 (50) 60 (44.7) 74 (55) 74 (55) 90 (67) 74 (55) 90 (67) 90 (67) 74 (55) 74 (55) 90 (67) 90 (67)
OPERATING LOAD LBS. (KG)
MODEL
66 (168) 67 (168) 68 (168) 5) 66 (168) / 69 (17 8) 76 (193) / 78 (19 78 (198) 8) 76 (193) / 78 (19 78 (198) 76 (193) 76 (193) 8) 76 (193) / 78 (19 76 (193)
175 210 215 250 270 300 330 Teleskid 3TS-8W
VOLVO 59.8 (151.89) 59.8 (151.89) 64.6 (164) 64.6 (164) 69.1 (175.5) 69.6 (176.7) 69.6 (176.7) 69.6 (176.7) 69.6 (176.7) 69.6 (176.7) 65.9 (1.68) 74.3 (1.89) 76.0 (1.93) 76.0 (1.93)
1,750 (794) 2,114 (959) 2,158 (979) 2,250 (1,021) 2,600 (1,179) 3,000 (1,361) 3,295 (1,495) 3,100 (1,450)
MUSTANG 1,050 (476) 2026 1050R 1350R 1500R 1650R 1900R 2200R 2600R 2700V NXT2 3300V NXT2 4000V 4200V
MC60C MC70C MC85C MC95C MC110C MC115C MC135C MCT85C MCT110C MCT125C MCT135C
1,050 (476) 1,350 (612) 1,500 (680) 1,650 (748) 1,900 (862) 2,200 (998) 2,600 (1179) 2,700 (1225) 3,300 (1497) 4,000 (1814) 4,200 (1906)
1350 (612) 1550 (703) 1750 (794) 1900 (862) 2,250 (1,009) ) 2,600 (1,179.3 3,000 (1,360.7) 1,900 (862) 2,260 (1021) ) 2,600 (1,179.3 3,000 (1,360.7)
LIUGONG 385B
OPERATING WID IN. (CM)
ENGINE POWER HP (KW)
2,300 (1,045)
56 (42) r 74 (55KW) Kohle r hle Ko ) W 5K (5 74 74 (55) 74 (55) 74 (55) 74 (55) 74 (55)
35 (26) 35 (26) 46 (34.5) 46 (34.5) 69.9 (52) 69 (51.7) 72 (53.7) 72 (53.7) 72 (53.7) 72 (53.7) 99 (74) 120 (90)
48 (36) 56 (42) 56 (42) 62 (46) 74 (55) 74 (55) 92 (66.9) 59 (43.9) 74 (55) 74 (55) 92 (66.9)
72 (53)
63 (160) 65 (165) 65 (165) 72 (183) 72 (183) 72 (183) 74 (188) 74 (188)
48.4 (123) 48.4 (123) 52.6 (134) 63.2 (161) 63.2 (161) 64.5 (164) 65.5 (166.4) 65.5 (166.4) 69.5 (176.5) 72 (183) 79.5 (202) 79.5 (202)
59.8 (152) 63 (160) 63 (160) 65 (165) 68 (173) 72 (183) 72 (183) 66 (168) 78 (198) 78 (198) 78 (198)
73 (185)
Construction Equipment Guide • Skid Steers, Compact Track Loaders & Attachments Section • www.constructionequipmentguide.com • April 19, 2017 • Page 79
PURCHASE A NEW CA P ATT MINI M EXCA AV VATOR AND ®
G UP TO $3,500 GET $ CASH BACK
†
IN NCLUDES 1.9% FINANCING FOR 60 MONTHS AND A POWERTRAIN EQUIPMENT PROTECTION PLAN.*
PLLUS ADDITIONAL CASH BACK REW WARDS ARDS FOR OTHER MODELS AND MACHINE FFAMILIES.
SINCE 1927 Alban CA ATT
SINCE 1948 Cleveland Brotherss
SINCE 1957 Foley, Incorporated
SINCE 1923 H.O. Penn Machinery
SINCE 1960 Milton CA AT T
SINCE 1916 Giles & Ransome Inc.
www.albancat.com Baltimore, MD 800-492-6994
www.clevelandbrothers.com Murrysville, PA 844-800-0802
www.foleyinc.com Piscataway, NJ 732-885-5555
www.hopenn.com Poughkeepsie, NY 844-CA AT T-1923
www.miltoncat.com Milford, MA 866-385-8538
www.ransome.com Bensalem, PA 877-RANSOME
* For complete details, check with yyour local Cat® dealer. Offer valid from February 1, 2017 to June 30, 2017 on select new models of machines manufactured by Caterpillar Inc. Building Construction Products Division. To To be eligible, a sales contract must be signed durinng the offer period. Offer available only at participating Cat dealers. Offer is available to customers in the USA and Canada only and cannot be combined with any other offers. Prior purchases do not qualify. Offer is subject to machine aavailability. All new Building Construction Product models are eligible for the promotion. † The cash back offer is based on a predetermined amount for each machine that is applied to the sale price. Cash back amount varies by model. Customers must apply cash back offer to the sale price of the machine. Offer can only be used at the Cat dealer and must be redeemed on the date of purchase. The offer has no cash value and is not transferable. To receive the interestt rate offer, all remaining balances must be financed through Cat Financial and are subject to credit approval through Cat Financial. Financing rate is subject to approval and some customers will not qualify. The interest rate offer is only for customers who qualify. Not all buyers may qualify. Higher rates apply for buyers with lower credit ratings. The Powertrain Equipment Protection Plan (EPP) is provided through Cat Financial for use at participating Cat dealers. EPP P coverage varies by model. Final machine prices are subject to change. Prices do not include taxes, freight, set-up, delivery, document fees, inspections, additional options, or attachments. Program period and conditions subject to chaange without prior notice and additional terms and conditions may apply. 3 year/1500 hour Powertrain EPP included. Cash back varies by model from $1,000-$1,100 on 300.9-302.7 Mini Excavators. © 2017 Caterpillar. All Rights Reservved. CAT, T, CA ATERPILLAR, TERPILLAR, BUILLT T FOR ITT,, their respective logos, “Caterpillar YYellow,” the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permisssion.
Page 80 • April 19, 2017 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide
ASV Offers Posi-Track RT-30 Compact Track Loader ASV LLC offers the Posi-Track RT-30 compact track loader as a heavy-duty commercial machine in a small package. The radial lift loader is the industry’s smallest siton model yet features the same productivityenhancing qualities as larger ASV machines, according to the manufacturer. This includes highly efficient hydraulics and cooling systems as well as best-in-class low ground pressure. In addition, the RT-30 provides a safer, more productive alternative to walkbehind and sit-on mini-skidsteer loaders. The ASV unit’s small size makes it ideal for contractors, rental centers and homeowners looking for a commercial-quality, compact machine for work in tight spaces for applications such as landscaping, snow removal and construction. “This is not an entry-level machine. We designed it to our standards of maximum performance with no compromises,” said Jim DiBiagio, ASV general manager. “We built the RT-30 as a tough piece of equipment that’s ready to be used every day, all day. This unit provides contractors and rental centers an addition to their fleet for work that requires small size but serious quality.” The 3,600-lb. (1,633 kg) RT-30 is 48 in. (122 cm) wide and has an 8.4-ft. (2.5 m) lift height. Its compact size and 10 inches of ground clearance minimize risk of property damage or damage to the machine while working in hard-to-reach areas, whether clearing snow on sidewalks and through alleys or while completing landscaping or construction work in high-density housing areas. The machine’s size also optimizes it for the rental market as the compact track loader is easy to transport on a trailer pulled by a pick-up truck. It is simple to operate, making rental customer training easy, including homeowners who can use it in backyards and eliminate manual labor. In addition, the RT-30 features easy serviceability as a result of a single-door system that allows fast access to the engine, filters and other daily checkpoints. This means faster rental turnaround and less downtime for contractors. The RT-30 offers a safe alternative to similarly sized walk-behind and stand-on skidsteer loaders. The ASV unit’s cab provides rollover protection and protects the operator from outside elements. The cab’s seat also eliminates the fatigue that comes from standing. In addition, the compact track loader also features more ground clearance and lower ground pressure than similarly sized machines on the market.
The ASV Posi-Track RT-30’s small size allows it to excel in tight areas in industries such as landscaping, snow removal, rental and construction.
The RT-30’s industrial diesel engine provides more torque than smaller gas or diesel engines common in mini-skidsteer loaders. “The RT-30 is safer, less tiresome and more productive than mini-skidsteer loaders,” said Bill Wake, ASV director of product development. “The unit features all of these benefits while being similarly priced to premium walk-behind and stand-on options.” ASV builds the RT-30 from the ground up. The undercarriage features ASV’s PosiTrack rubber track suspension. The singlelevel suspension is made up of two independent torsion axles per undercarriage, allowing for a smooth ride over every type of terrain at speeds as fast as 5.7 mph. In addition, the multiple wheel contact points and central drive lug virtually eliminate track derailment and facilitate maximum performance on steep slopes. The RT-30 comes standard with 11-in. (28 cm) wide tracks, resulting in the industry’s lowest compact track loader ground pressure of only 3 psi. This means minimal risk of damage on delicate surfaces such as turf and allows for extra flotation and traction over surfaces such as
ice, mud, snow and brush, according to the manufacturer. The RT-30 features an open-rail and drive-sprocket design, resulting in longer sprocket and bogie life along with easier and faster undercarriage cleaning than with other steel-embedded undercarriages. ASV manufactures rollers with mechanical face seals that don’t require maintenance for the life of the machine. The tracks are produced using a single-cure process, eliminating cure-point weaknesses that can lead to premature breakage. In addition, the tracks are strengthened with embedded co-polymer cords. This allows for a 1,500- to 2,000-hour track life — 30 percent more than steel-embedded track units. ASV backs the track life with a two-year, 1,500-hour track warranty. The RT-30 features a 32.7-hp Perkins 1.5L diesel engine that produces 64.39 ft.-lbs. of torque. Planetary drive motors transfer the torque to the internal-drive sprockets. Internal rollers prevent friction loss in the undercarriage, resulting in all power being transferred to the track regardless of drive speed. ASV built the RT-30’s auxiliary hydraulic
system to operate efficiently with a 10 gpm (37.8 Lpm) pump capacity and 3,000 psi. The machine includes large line sizes, hydraulic coolers and direct-drive pumps — rather than belt-driven pumps — transferring more flow and pressure directly to the attachment and preventing power loss. The RT-30 features a rated operating capacity of 665 lbs. (301.6 kg) and a tipping load of 1,900 lbs. (862 kg). Standard joystick controls make operation easy and intuitive. Operators can choose from a full line of attachments built for the RT-30 and its quick-attach plate, such as buckets, snow blades, snow blowers, augers, trenchers and pallet forks. In addition, buyers can fit the unit with an adaptor plate to accept standard skidsteer attachments. An optional turf track allows for operation on highly manicured surfaces, such as golf course greens, with minimal risk of damage. For more information, call 800/205-9913 or visit www.asvllc.com or www.positrack.com.
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Skid Steers, Compact Track Loaders & Attachments Section • www.constructionequipmentguide.com • April 19, 2017 • Page 81
JESCO, INC. 118 St. Nicholas Ave. South Plainfield, NJ 08070 908/753-8080 1790 Route 38 Lumberton, NJ 609/267-2020 1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080 Fax: 973/575-5553 Middletown, DE 302/376-0784
Baltimore, MD 410/687-1700 Delmar, MD 410/546-1090 Frederick, MD 301/874-5500 White Plains, MD 301/870-1438 497 Fishkill Avenue Beacon, NY 12508 845/831-1800 800/724-0725 Fax: 908/821-1671 110 East Jefryn Blvd. Deer Park, NY 11729 844/482-0910
LESLIE EQUIPMENT COMPANY 6248 Webster Road Cowen, WV 26206 304/226-3299 www.lec1.com 136 Clifftop Drive Beaver, WV 25813 304/255-1525 Rt. 33 West Norton, WV 26285 304/636-6421 19 Goff Crossing Drive Cross Lanes, WV 25313 304/204-1818 Fax: 304/204-1811
2098 Lillian Lane Pleasant Valley (Fairmont), WV 26554 304/534-5454 Fax: 304/534-5888 8331 Meade Springer Rd. Ashland, KY 41101 606/928-3477 Fax: 606/928-6845 195 Industrial Park Drive Pikeville, KY 41501 606/432-0321 Fax: 606/432-5918 105 Tennis Center Drive Marietta, OH 45750 740/373-5255 Fax: 740/373-5570
THE W.I.CLARK COMPANY 30 Barnes Industrial Park Rd. Wallingford, CT 203/265-6781 www.wiclark.com Danbury, CT 203/775-1203 Plainfield, CT 860/546-4808
Page 82 • April 19, 2017 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide
Advance Tires Adds L4 Solid Skid Steer Tire
Ambrose Equipment Co. 1401 Hooksett Rd. Hooksett, NH 03106 603-644-8787 1 Madison Street Plainville, MA 02762 508-643-0044 www.ambroseequipment.com
Advance Tire Inc. recently added an L4 solid skid steer tire to its solid tire line. Known as the Contender, it has an improved solid tire design with 30 percent more wearable rubber than traditional directional solid tires, according to the manufacturer. By using a heavy block tread design, the tire is expected to provide longer wear on hard surfaces. Advance also made the tire directional and used a wider block separation to make sure the Contender provides traction on unimproved surfaces such as dirt yards. The tire comes with two or three rows of aperture comfort holes, which provide a soft ride and improve traction. The Contender is available in both 30x10-16 and 33x12-20; these sizes replace 10x16.5 and 12x16.5 size tires. The Contender is shipped tire and rim ready to install. For more information, call 800/445-6647 or visit www.advancetires.com.
Able Tool & Equipment 410 Burnham Street South Windsor, CT 06074 860-289-2020 www.abletool.net
Admar Construction Equipment & Supplies
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Takeuchi TS80 Skid Steers Deliver Blend of Performance, Durability The TS80 skid steer loaders, available in both radial and vertical loader arrangements — are the largest models in the Takeuchi skid steer product line that also includes the TS50 and TS60. Highly maneuverable and powerful, the large frame TS80 series loaders deliver a blend of performance, durability and operator comfort, according to the manufacturer. The TS80 skid steer loaders feature a 74 hp Final Tier IV Deutz engine that delivers 192 ft. lb. of torque at 1,800 rpm. A key benefit of the new Deutz engine is its simple maintenance free diesel oxidation catalyst (DOC) that does not require regeneration, cleaning or diesel exhaust fluid (DEF). Takeuchi TS80R2 Skid Steer The TS80R2 features an operating weight of 7,950 lbs. (3,606 kg) and a rated operating capacity of 2,825 lbs. (1,281 kg). The bucket breakout force on the TS80R2 is 5,845 lbs., with a lift arm force of 7,080 lbs. and a maximum hinge pin height of 10 ft. 5 in. (3.2 m). Takeuchi TS80V2 Skid Steer The TS80V2 is heavier than its radial counterpart with an operating weight of 8,965 lbs. (4,066 kg) and a rated operating capacity of 3,500 lbs. (1,587 kg). Bucket breakout force on the vertical model is 5,920 lbs., with a lift arm force of 6,200 lbs, and a maximum hinge pin height of 10 ft. 10 in.
1950 Brighton Henrietta Town Line Road Rochester, NY 14623 585-272-9390 7800 Brewerton Road Cicero, NY 13039 315-433-5000 449 Commerce Rd. Vestal, NY 13850 607-798-0333 1394 Military Road Tonawanda, NY 14217 716-873-8000 2390 Rochester Rd. Canandaigua, NY 14424 585-396-0031 878 Old Albany Shaker Road Latham, NY 12110 518-690-0750 3001 West 17th Street Erie, PA 16505 814-833-7761 121 Armstrong Road Pittston, PA 18640 570-299-5505 www.admarsupply.com
AEI Equipment Services, Inc. The TS80 skid steer loaders, available in both radial and vertical loader arrangements — are the largest models in the Takeuchi skid steer product line.
(3.3 m). Comfortable to operate, the TS80 skid steers feature a functional and well-equipped operator’s station that now includes a lower threshold for easier entry and exit for the operator. Several new options are now available and include ride control, bucket positioning and high-flow auxiliary hydraulics to increase both productivity and versatility. For more information, visit www.takeuchi-us.com.
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
301 East Main Street Tamaqua, PA 18252 888-520-7781 • 570-668-3003 www.aeincservices.com
Construction Equipment Guide • Skid Steers, Compact Track Loaders & Attachments Section • www.constructionequipmentguide.com • April 19, 2017 • Page 83
Cap Rents Supply, LLC 18-25 43rd Street Astoria, NY 11105 718-932-4100 Fax: 718-932-8971 www.caprents.com
Gamka Sales Co., Inc. 983 New Durham Rd. Edison, NJ 08817 732-248-1400 Fax: 732-248-1445 www.gamka.com
Iron Source Equipment 25113 Dupont Blvd. Georgetown, DE 19947 302-856-7545 Fax: 302-856-7546 www.ironsourcede.com 5722 N. Dupont Hwy. Smyrna, DE 19977 302-653-7562
Norris Sales Company, Inc. 1010 Conshohocken Rd. Conshohocken, PA 19428 610-279-5777 Fax: 610-279-7973 668 Berlin Cross Keys Road Sicklerville, NJ 08081 856-740-1400 www.NorrisSales.com
Central Equipment Company P.O. Box 261 45 Dempsey-Greaves Lane Stillwater, ME 04489 207-827-6193 Fax: 207-827-3774 54 Old Canal Way Gorham, ME www.centralequipmentco.com
Pump & Power Equipment Corp. 8019 Dorsey Run Rd. Jessup, MD 20794 410-799-1800 Fax: 410-799-1804 www.pumpnpowerequip.com
Page 84 • April 19, 2017 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide
Large-Frame Skid Steers, CTLs Make Big Projects Seem Smaller Contractors, landscapers, farmers, rental professionals and other equipment owners who understand the value of compact equipment can now expect even more power, productivity and uptime on the job with the new John Deere large-frame G-Series skid steers (330G, 332G) and compact track loaders (331G, 333G). These machines were inspired by extensive feedback from John Deere customers looking for more productivity, better visibility and simplified service to remain competitive in their businesses. John Deere not only answered by improving in these areas, but also added a host of new features to make the large-frame G-Series machines easier to run and maintain on jobs of every scale. “There has never been a better time to own compact equipment,” said Gregg Zupancic, product marketing manager, John Deere Construction & Forestry. “Demand for compact machines that maximize productivity and uptime at low daily operating costs is growing, and John Deere is growing with it by adding powerful new options to our G-Series lineup, like the new largeframe skid steers and compact track loaders.” The biggest improvement on the largeframe G-Series is the refined vertical-lift loader boom design that rises higher, reaches farther and lifts more for quicker and easier loading. Height to hinge pin is 11 ft. (3.3 m), enabling operators to easily load dump trucks, feed mixers, fill hoppers and everything in between. Customers also will appreciate the new lift path that extends an additional 6 in. (15 cm) from the machine. The large frames also serve up substantially greater boom and bucket breakout forces. In fact, they have horsepower that is comparable to a small backhoe or crawler, and they also work comfortably in tight quarters, so operators can accomplish more with less machine. Increased rated operating capacities of up to 3,700 lbs. (1,678 kg) give these models the muscle needed to master heavy loads, coupled with a breakout force that has been increased by 40 percent to make lifting heavy loads easier. Increased auxiliary hydraulic flow and power on the large frames means customers can make the most of an even broader range of attachments for a wide variety of work. Universal Quik-Tatch enables you to go from bucket to forks and more in just seconds. Generous standard and optional highflow auxiliary hydraulics also let you effortlessly run powered attachments, such as hydraulic hammers, cold planers, mulching heads and trenchers. All auxiliary hydraulic lines and wiring on new machines are now routed through the boom where they’re more protected and out of the operator’s sightline.
The John Deere large-frame G-Series skid steers (330G, 332G) and compact track loaders (331G, 333G) were inspired by extensive feedback from John Deere customers looking for more productivity, better visibility and simplified service to remain competitive in their businesses.
“Demand for compact machines that maximize productivity and uptime at low daily operating costs is growing, and John Deere is growing with it by adding powerful new options to our G-Series lineup, like the new large-frame skid steers and compact track loaders.” Gregg Zupancic John Deere Construction and Forestry
Understanding a comfortable operator is a more productive operator, John Deere made several enhancements to the cab on the large-frame G-Series machines. An easyaccess entryway, tightly sealed swing-out door, and ample foot-and legroom simplify getting in, getting comfortable and getting things done. Unobstructed sightlines to the bucket corners, the edge of the tires or tracks, and the job site ahead and behind instill con-
fidence in tight quarters. Best-in-class visibility gets even better with an optional rearview camera that displays the action behind on an upfront monitor and an optional LED lighting package that provides front and side illumination for extended days and after-dark tasks, according to the manufacturer. Consistent with other G-Series models, flexible control choices on the large frames
allow contractors to choose between standard EH ISO controls, (EH) ISO joystick controls or options that are switchable between ISO- and H-patterns, or EH 3-way switchable controls that allow operations between ISO- or H-pattern, or hand and foot controls of operation within the same machine. The cabs and floors are sealed and pressurized to keep out dust and excess noise, and a footwell clean-out makes debris management easier than ever, minimizing costly maintenance and downtime. Cab side windows also remove easily for cleaning. Another key uptime improvement on the G-Series large-frame machines is the integration of John Deere WorkSight, a suite of telematics solutions that increases uptime while lowering operating costs. At its heart, JDLink Ultimate machine monitoring provides real-time data and health prognostics to suggest maintenance solutions that decrease costly downtime. Remote diagnostics enable a dealer to read codes, record performance data and even update software without a trip to the job site. For more information, visit www.johndeere.com.
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Skid Steers, Compact Track Loaders & Attachments Section • www.constructionequipmentguide.com • April 19, 2017 • Page 85
Radial vs. Vertical Loader — Which to Use Depends on Job By David Steger SPECIAL TO CEG
Knowing the true differences between radial and vertical loader designs will help you leverage the advantages of each and enable you to select the best machine to your specific application. We will look at the obvious and maybe not as obvious details. Advantages of a Radial SSL If strength, stability and durability are your focal points, a radial lift arm loader may be for you, and are specially designed for rental applications, concrete contractors, and excavation contractors. The advantage of a radial loader is summed up in two words: simplicity and durability. There are fewer moving parts in the loader linkage (also correlating to its durability), better visibility due to less linkage, and also a lower cost than a vertical loader. The radial lift arm design typically offers greater lifting power (lift arm breakout) at ground level. It also has greater forward reach at mid-height, which is useful for backfilling (dumping material further into the trench while being able to sit further from the edge), and handling palletized material at truck height. Furthermore, a radial loader weighs less than a vertical machine which can help when transporting the machine. Finally, radial loader arms are more stable side to side with a better weight distribution front to back to handle ground-engaging attachments like light attachments and empty pallet forks. Advantages of a Vertical SSL If you never know what your jobs may throw at you, the versatility of a vertical lift arm loader may be the ideal choice. These machines excel at handling large attachments and heavy pallets and in some cases allow you to choose a smaller machine in place of radial due to the generally higher operating capacity. The biggest advantages for a vertical machine are capacity, lift height and a better balance. The key advantage is the act of keeping the load closer to the machine during the lift cycle for better balance. Better balance results in a higher TIP/ROC. The design also allows for greater lift height and reach at lift height with some designs, although many well-designed radials are within inches of their vertical siblings. Additionally, they are generally more rear heavy due to the extra linkage as well as more expensive due to more parts and steel. At the end of the day, both will push, dig, lift, carry and dump. However some models and lift configurations may be better suited to certain tasks than the other. Before making any decisions, make sure that you are choosing the right option that is most suitable for your needs. When in doubt, it is always good to consult with your dealer. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
I t d i Isuzu Introducing I REDT h™ Ti REDTech Tie er 4 and d beyond b d Dies Di sell Engines
R e d T
ELI ABLE Over 2 20 Million Engines Worldwide Worldwide
CO O-FRIENDLY No DPF or DPF Maintenance ance
UR ABLE Optimized Premium Fuel el Injection
EC CHN NOLOGICALLY Y ADVANCED Fine Tuning Tuning for Each Ea ach Application
I ISUZU
Isuzu Motors America, LLC C :: 46401 Commerce Center Drive, Plymouth ymouth MI 48170 :: 734.582.9470 :: www.IsuzuREDTech.com e
Page 86 • April 19, 2017 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide
New Holland Introduces L234 Skid Steer With Greater Operating Capacity New Holland’s L234 skid steer loader model, has replaced the L230.
Valley JCB
Northland JCB
1109 Middle River Rd. Baltimore, MD 21237 800/633-5077 20332 Leitersburg Pike Hagerstown, MD 21742 800/336-7414 8192 Euclid Court Manassas Park, VA 20111 800/300-5579 www.valleyjcb.com
6847 Ellicott Dr. E. Syracuse, NY 13057 315/463-7333 4381 Walden Ave. Lancaster, NY 14086 716/684-9040 241 Paul Rd. Rochester, NY 14624 585/328-6380 2820 Curry Rd. Schenectady, NY 12303 518/356-5932 33B Commerce Ave. S. Burlington, VT 802/864-0308 www.liftechequipmentjcb.com
6 Jonspin Road Wilmington, MA 01887-1057 800/225-7956 978/658-5900 Fax: 978/658-8837 230 Cherry Street Shrewsbury, MA 01545 800/698-8517 508/842-3880 Fax: 508/842-4404 3 Chalet Rd. (Route 44) Middleboro, MA 800/489-8000 781/341-0321 Fax: 781/645-1315 23 Foss Road Lewiston, ME 04240 800/640-6050 207/784-1501 Fax: 207/777-5503 44 Locke Road Concord, NH 03301 877/767-0655 603/717-0390 Fax: 603/717-7035 150 North Plains Industrial Rd. Wallingford, CT 06492 888/828-7767 203/626-7670 Fax: 203/774-0071
Edward Ehrbar, Inc.
MH JCB
4 Executive Plaza Yonkers, NY 10701 914/738-5100 Fax: 914/738-6847 42 Kenosia Ave Danbury, CT 06810 203/743-0088 601 Coates Avenue Holbrook, NY 11741 631/563-7600 www.ehrbar.com
126 Lakeview Dr. Charleston, WV 25313 304/776-6900 www.mhjcb.com
Liftech JCB
New Holland’s L234 skid steer loader model, has replaced the L230. One size up in weight class, the L234 is the most powerful skid steer loader in the New Holland line-up. It provides superior visibility and stability with even more power and performance for the most difficult jobsite challenges, according to the manufacturer. With its 90 hp engine, the L234 will features increased rated operating capacity (ROC) - 3,400 lbs. at 50 percent tipping load. The 6,918 lbs. loader lift cylinder breakout force and 38 gpm Hi-Flow with 3,450 PSI will be best-in-class. ORing face sealed (ORFS) hydraulic ports are designed to handle higher pressures. Super Boom technology delivers maximum reach at full height. New, comfortable, composite and vinyl seat choices are available and new livery will include gray wheels and new seats. Engine Emissions and Serviceability The New Holland L234 uses the FPT F5B engine with selective catalytic reduction (SCR) technology for Tier IV Final certification. With the radiator facing rearward, it is easy to clean. Filters, and reservoirs and battery jump posts are easily accessible for easy service. Cab Comfort and Safety The improved cab is a comfortable and stress-reducing environment in which operators can spend long days on the job. The controls and electronics are all ergonomically placed and comfortable to use. An available upgrade, New Holland’s demo door, features a half-inch-thick “shatter proof” polycarbonate front door. With the IntelliPanel mounted on the “A” post, the operator can reference critical machine information during operation. A new safety lap bar is an available factory installed option. As with all New Holland Skid Steer Loaders, the L234 has unmatched rear visibility due to the Super Boom design. There are no rear towers blocking visibility at angled views to the rear. The crossbar is located low and out of the way of rear visibility.
Glide Ride, and high-low speed range are all located on the hand controls. Stability & Center of Gravity The L234 skid steer loader is superior to all others in the area of stability. With its long wheelbase, low center of gravity, and weight distribution across the wheels, it can’t be beat. The lift cylinders are pushing off the front of the frame allowing more bucket cutting down force and better load carrying stability. This also allows for better lift leverage and more accurate vertical lift, according to the manufacturer. Boom Stop — the Pivot Pin Protector Additional improvements to this and other New Holland skid steer loaders is a newly-designed heavy-duty, composite “hockey puck” boom stop. These prevent steel-on-steel contact and wear during digging, carrying and other operations. The boom stop can be changed for different carrying heights. When lowering the bucket and pushing into a pile, the boom will carry the load back into the boom stops, which allow the main frame to absorb the force. New Holland places these boom stops low so the force goes directly into the frame. Their location is crucial to the life of the boom pivot pins at the rear of the boom. Accessing Under the Cab The L234 and all New Holland skid steers feature cabs that flip forward, allowing for easier access for cleaning and maintenance. In order to safely exit the others’ cabs, a second person is required to lock out the lift cylinders once the boom is in the air. New Holland has safety built-in to allow the operator to lock out the booms before exiting the cab. All it takes is the twist of the wrist. With the Boom Lock engaged, the cab can be tilted forward for unencumbered access. For more information, visit www.newholland.com/na. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Skid Steers, Compact Track Loaders & Attachments Section • www.constructionequipmentguide.com • April 19, 2017 • Page 87
TELESKID.JCB.C COM
Introducing a truly unique machine witth endless possibilities. Th new JCB T The Teleskid eleskid l kid is i the th first fi t andd only l skid kidd steer t andd compactt track t k loader l d with ith a telescopic boom, making it the most versatile le machine you’ve ever seen. It can lift higher, reach further and dig deeper than any other skid steer on the market and can access areas you wouldn’t have thought possible, until now. Contact your JCB dealer today and be one o of the first to demo this game changing piece of o equipment.
/J JCBNA
@ @JCBNA JCBNA www w.jcbna.com .jcbna.com
Earthborne JCB
Walsh JCB
Farm-Rite, Inc.
A. Montano Company
Stephenson JCB
35 Easton Rd. Warrington, PA 18976 215/343-2000 www.earthborneinc.com
796 Unionville Rd. Prospect, PA 16052 724/865-9221 2350 Munster Rd. Lilly, PA 15946 814/886-5191 www.walshequipmentjcb.com
122 Old Cohansey Rd. Shiloh, NJ 08353 800/752-6373 3853 Middle Country Rd. Calverton, NY 11933 631/284-3127 www.farm-rite.com
571 Route 212 Saugerties, NY 12477 845/247-0206 www.amontanoco.com
7201 Paxton St. Harrisburg, PA 17111 800/325-6455 135 Lincoln Ave. Prospect Park, PA 19076 800/220-4033 137 Armstrong Rd. Pittston, PA 18640 866/667-6756 www.stephensonequipmentjcb.com 4431
Page 88 • April 19, 2017 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide
Medium-Frame…
Wacker Neuson Introduces Line of Skid Steers, CTLs Wacker Neuson introduced a new line of medium frame skid steer and compact track loaders that are an ideal fit for a variety of applications. Four new skid steer and two new compact track loaders were developed from the ground up, offering the power and torque needed to lift more, push more, work longer and maneuver through challenging jobsite obstacles. They have the comfort and convenience owner operators expect and the durability they demand. With a best-in-class transferable engine warranty of four years or 4,000 hours, these new models are ideal for inventory management and resale, according to the manufacturer. The new skid steers and compact track loaders are built for performance, versatility and convenience. Class-leading hinge pin height on the vertical loaders provide maximum loading and unloading capabilities. An engine torque of 221 ft.-lbs. provides the power needed for improved ground-engaging performance in all kinds of terrain. The Kohler diesel engine features a maintenance-free, regeneration-free aftertreatment system, eliminating the impact of extreme heat or of the need for filters. Versatility comes standard with every Wacker Neuson loader. The universal skid steer attach-
ment plate enables attachments to be switched out easily, accomplishing more in less time. Category-leading hydraulic horsepower is standard and high-flow enables these machines to handle high-performance attachments like rakes, movers, tillers and augers with ease. The 30-gal. fuel tank gives operators more time in the cab and less time refueling. Wacker Neuson created a cab environment with operator comfort and convenience in mind. Access in and out is easy, there’s no restrictive lap bar and controls are intuitively placed. Mechanical Hand-Foot and selectable ElectricHydraulic options (ISO/H-Pattern) ensure operators with a variety of experience can efficiently operate these machines. Additionally, these machines offer a one-piece pod style cab that fully tilts forward with the arms down, providing complete access to all maintenance components. Wacker Neuson’s new skid steers (SW models) and compact track loaders (ST models) include a selection of engine horsepower and radial or vertical lift machines. (This story also can be found on Construction Equipment Guide’s website at www.construc- Wacker Neuson introduced a new line of medium frame skid steer and compact track loaders that are an ideal fit for a variety of applications. tionequipmentguide.com.)
Slide-Up, Front-Entry Door Standard on Kubota SSV Models Kubota Tractor SSV-Series includes the 64 gross hp SSV65 and the 74 gross hp SSV75. Standard on all Kubota SSV models is a slide-up, front-entry door that rises overhead, instead of swinging out. This design allows the door to be opened regardless of loader position so that the operator can enter and exit the machine even when the skid steer is in a tight or difficult position. Other standard features include a spacious, dust-resistant pressurized cabin with an optimized climate control system, and a side light that allows better visibility and safer operation at night. In addition, an optional multi-function lever feature is available, allowing for fingertip control of major machine and implement functions. Kubota Power and Performance The SSV-Series is powered by an EPA Tier IV certified four-cylinder Kubota diesel engine. With standard two-speed travel and
Standard on all Kubota SSV models is a slide-up, front-entry door that rises overhead, instead of swinging out. This design allows the door to be opened regardless of loader position so that the operator can enter and exit the machine even when the skid steer is in a tight or difficult position.
optional high-flow hydraulics, Kubota’s vertical lift geometry skid steers will meet the needs of Kubota customers across the construction, rental and agriculture
segments. The SSV65 boasts a rated operating capacity of 1,950 lbs. (884.5 kg) and bucket breakout force of 4,839 lbs.; the SSV75 has a rated operating capacity of 2,690
lbs. (1,220 kg) and bucket breakout force of 5,884 lbs. The loaders on the SSV-Series are easily capable of dumping into a dump truck with 10-ft. (3 m) sides.
User-Friendly Serviceability On a job site, contractors strive to minimize downtime, and the SSV-Series helps to do just that. Kubota engineered its skid steers to be easily serviced and maintained. For example, the battery on the SSV models is positioned so that it is readily accessible for service and inspection; oil and fuel filters are placed in easy-to-access locations where drips will not leak on electrical components during changing; and bolt-on access handles were added to the cab so they can be easily replaced if damaged. In addition, the large fuel tank is located in the rear door for quick, clean and easy refueling and has enough fuel capacity to work all day. For more information, call 888/458-2682 or visit www.kubota.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Skid Steers, Compact Track Loaders & Attachments Section • www.constructionequipmentguide.com • April 19, 2017 • Page 89
Page 90 • April 19, 2017 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide
JCB Launches Skid Steers Offering More Power, Enhanced Capacity JCB is launching two new wheeled skid steer loaders — the 210 radial lift model offers a base rated operating capacity (ROC) of 2,100 lbs. (950 kg), while the new 215 vertical lift model boasts an ROC of 2,150 lbs. (975 kg). The operating capacity of both the 210 and 215 models can be increased by an additional 200 lbs. (90 kg), to 2,300 lbs. (1,040 kg) and 2,350 lbs. (1,065 kg) respectively, with an optional, dealer-fitted “suitcase” counterweight kit. More Power and Functionality The ROC of the 210 and 215 will allow operators to take full advantage of the high-flow auxiliary hydraulic circuit, delivering 30 gpm, to power a range of high-flow attachments such as cold planers, augers and trenchers. JCB Chief Innovation and Growth Officer Tim Burnhope said: “The 210 and 215 deliver the high-horsepower benefits of larger skid steers to operators of light-frame skid steer platforms. High-flow hydraulics allow our operators to perform more tasks more efficiently, use a greater range of attachments, and complete tasks faster.” Additionally, the new 210 and 215 are the first in JCB’s small-frame skid steer line up to be powered by the JCB by
Kohler 74 hp (55 kW) engine, which offers a 20 percent increase in horsepower over comparably-sized skid steers in the JCB range, yet requires no diesel particulate filter (DPF). Both machines are Stage III B/Tier IV Final compliant. “The combination of more horsepower and a high-flow hydraulics system really reinforces the versatility of these incredible new skid steer machines, and expands the range of projects to which light-framed JCB skid steers can be applied. The added benefit of all that additional power is that these machines will not be required to run at full capacity all the time, which means less stress on the systems and drivetrain, resulting in more uptime,” Burnhope said. Proven Features The JCB 210 and 215 skid steers feature JCB’s single PowerBoom design with exclusive side door entry, resulting in increased safety, 60 percent better visibility and a 46 percent larger cab than other models in this size class, according to the manufacturer. For more information, visit www.jcb.com.
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
The 210 radial lift model offers a base rated operating capacity (ROC) of 2,100 lbs. (950 kg), while the new 215 vertical lift model boasts an ROC of 2,150 lbs. (975 kg). The operating capacity of both the 210 and 215 models can be increased by an additional 200 lbs. (90 kg), to 2,300 lbs. (1,040 kg) and 2,350 lbs. (1,065 kg) respectively, with an optional, dealer-fitted “suitcase” counterweight kit.
Construction Equipment Guide • Skid Steers, Compact Track Loaders & Attachments Section • www.constructionequipmentguide.com • April 19, 2017 • Page 91
PLEASE CONT TA ACT YOUR LOCAL DEALER D
IMPU PULSE DYN NAMIC
CONNECTICUT TYLER EQUIPMENT CO ORP. Berlin • 860-357-9245 5
DELAW WARE A BURKE EQUIPMENT COMPANY Newark • 302-737-3100
EAGLE POWER AND EQUIPMENT New Castle • 302-652-3028
ELLIOTT & FRANTZ, IN NC. Delmar • 410-463-0248 4
JESCO INC Middletown • 302-376-0 - 784
WHEN HIGH-PERFOR RMANCE COMPACTION N MEETS MAINTENANC CE-FREE RELIABILITY
McCLUNG-LOGAN EQU UIPMENT CO. Bridgeville • 302-337-3400 3
MAINE CHADWICK-BAROSS, INC. Bangor • 800-698-483 38 Caribou • 800-270-254 47 Westbrook • 800-262-5714
MARYLAND ELLIOTT & FRANTZ, IN NC. Jessup • 443-463-502 28
JESCO INC Baltimore • 410-687-17 700 Delmar • 410-546-1090 0 Frederick • 301-874-55 4 500 White Plains • 301-870-1438
Ho-Pac® and Skid-Pac® co ompactor//driv d ers s reflect Allied’s ied’s commitment to incre ease your carrier and your attachment ren e tal ROI. Compactor//driv d ers efficien f tly deliver the right im mpulse for o ces c you need, thanks to grea e ter operating control. o And we do it every day with auto o-lube and other t designed-in maintenanc ce advan a tages. Fo or details, visit your Allie ed distributor or call 800-3211 1046.
McCLUNG-LOGAN EQU UIPMENT CO. Baltimore • 410-242-65 500
MASSACHUSETTS AHEARN EQUIPMENT, INC. Spencer • 508-885-7085 0
CHADWICK-BAROSS, INC. Chelmsford • 800-804 4-0775
EQUIPMENT 4 RENT, INC. Avon • 508-583-5500
TYLER EQUIPMENT CO ORP. East Longmeadow • 80 00-292-6351
NEW HAMPSHIRE CHADWICK-BAROSS, INC. Concord • 800-477-40 063
NEW JERSEY HOFFMAN EQUIPMEN NT, INC.
THE ERE’’S ERE S NO SUBSTITUTE T FOR EXP E PERIENCE ER RIENCE
Piscataway • 732-752-3600
JERSEY RENTS Bayville • 732-606-100 02
JESCO INC South Plainfield • 800-241-7070
SPECIALTY RENTAL A S& ATTACHMENTS
Vis sit Our New Websi e te
Hammonton • 609-561-7702
ALLIEDCP.co om | 800.3211.1046
NEW YORK ALL COUNTY EQUIPME ENT RENTAL A Bohemia • 631-589-36 675
ATLAS MACHINE RENTAL A LLC Bronx • 718-483-8132
CONTRACTORS SALES CO., INC. Albany • 518-456-1445 5
FIVE STAR A EQUIPMEN NT, INC. Kirkwood • 607-775-20 006 Orchard Park • 716-662 2-2191 Rochester • 585-235-30 3 11 Syracuse • 315-452-45 560
GEORGE & SWEDE SALES & SERVICE, INC C. Pavillion • 800-724-8722
TOTAL A TOOL RENTAL A Brooklyn • 712-222-9588
PENNSYLV VANIA A A EAGLE POWER AN ND EQUIPMENT Montgomeryville • 215-699-5871 Uwchlan • 610-458 8-7054
ELLIOTT & FRANT TZ, INC. Harrisburg • 717-6 652-5430 King Of Prussia • 6106 279-5200
FIVE STAR A EQUIPM MENT, INC. Athens • 570-882-8800 Dunmore • 570-34 46-1701 Williamsport • 570-494-4030 0 Waterford • 814-796 9 -2663
TRACEY ROAD EQUIPM MENT, INC.
GAP POWER RENT TAL A S
Adams Center • 888-33 35-0200 East Syracuse • 800-872-2390 Henrietta • 866-950-6210 Kirkwood • 800-370-9488
Gap • 717-442-8970
HIGHWA AY EQU UIPMENT & SUPPLY Y CO. Drums • 570--788-1127 Harrisburg • 717-564-3031
HIGHWAY AY EQU UIPMENT CO. Dubois • 814--371-3600 Mckean • 814 4-476-7755 Zelienople • 724-452-7800
MACHINERY RENTAL A CORP. Pittsburgh • 412-361-3600
MESSICK’S FARM A EQUIPMENT Elizabethtown • 800-222-3373
VIRGINIIA
WEST VIRGINIA
BOBCAT OF NORTHERN VIRGINIA
LESLIE EQUIPMENT COMPANY A
Bristow • 703-754-3300
ELLIOTT & FRANTZ, INC. Manass sas • 703-257-2381
HIGHWA AY EQUIPMENT COMPANY MID-ATL LANTIC Troutvillle • 540-992-4150
McCLUNG-LOGAN EQUIPMENT CO. Cheseapeake • 757-485-3314 Glenn Allen A • 804-266-0000 Manass sas • 703-393-7344 Salem • 540-989-3750 Winches ester • 540-722-3700 Wise • 276-328-8027
WINCHESTER EQUIPMENT CO. Winches ester • 800-323-3581
Be eaver • 304-255-1525 Co owen • 304-226-3299 Crross Lanes • 304-204-1818 No orton • 304-636-6421
Page 92 • April 19, 2017 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide
Case Introduces SV340 Skid Steer
PENNSYLVANIA
GROFF TRACTOR & EQUIPMENT INC www.grofftractor.com Mechanicsburg 717/766-7671 Ephrata 717/738-0220 State College 814/353-8400 New Stanton 724/755-0124 Cranberry Township 724/898-1535 Ebensburg 814/472-7300
MEDICO INDUSTRIES, INC. www.medicoind.com 1500 Highway 315 • Wilkes-Barre 18702 800/633-0027 3647 Shafer’s Schoolhouse Rd. Stroud Township 18360 570/420-0877
520-0877 The SV340 offers optional high-flow (38.7 gpm [146.5 Lpm] at 3,450 psi) and enhanced high-flow (35 gpm [132.5 Lpm] at 4,000 psi) auxiliary hydraulics for excellent power and attachment versatility.
The Case SV340 skid steer is the company’s most powerful skid steer ever built. Rated at 3,400 lbs. (1,542 kg) operating capacity and featuring a bucket breakout force of 9,531 lbs., the new vertical-lift skid steer continues the Case tradition of building powerful operating capacities into a platform that is easy to use for operators in all industries, according to the manufacturer. The SV340 provides extra power and performance, along with a stronger lift arm, H-link and upper chassis. The machine also offers optional high-flow (38.7 gpm [146.5 Lpm] at 3,450 psi) and enhanced high-flow (35 gpm [132.5 Lpm] at 4,000 psi) auxiliary hydraulics for excellent power and attachment versatility. Additional enhancements also have been made to manifold valves, the gear pump and the auxiliary loader circuit to allow for added power and performance. The added operating performance — along with new heavy-duty 14 x 17.5 tires and additional counterweights — makes the SV340 an ideal operating platform for more advanced attachments such as cold planers, tree spades and stump grinders. The skid steer is compatible with more than 250
attachments, including the new Case sectional snow pushes, buckets, forks, brooms, rakes and more. A 90-hp FPT engine with selective catalytic reduction (SCR) technology powers the new skid steer. SCR eliminates the need for a diesel particulate filter (DPF), and the associated downtime of other systems that require regeneration. It also allows the engine to run cooler and with greater fuel efficiency as fuel is not used to burn off collected particulate. The SV340 features EZ-EH (electro-hydraulic) controls that provide nine adjustable speed and control sensitivity settings that can be adjusted on the fly. This allows the operator to quickly switch between personalized settings for speed and control, and to tailor machine performance to the application. A single rocker switch allows operators to switch between the Case “H” operating pattern and ISO pattern controls for jobsites where numerous operators with different operating preferences are working. The skid steer also features push-button ride control, which cushions loader arm movement for a smoother ride and greater material retention.
The SV340 offers one of the widest cabs in the industry and the lowest entry threshold for easy access and greater visibility down to the bucket/attachment. The cab-forward design combines with ultra-narrow wire side screens to provide best-inclass 360-degree visibility and excellent sight lines down to the bucket edge/curb lines. A large, rounded rear window delivers excellent rear visibility. Standard heavy-duty front and side lights, along with a skylight, further improve all-around visibility. The machine also features an optional radio and upgraded climate controls for optimal comfort. The SV340’s routine service points are all located at the rear of the machine. Operators can quickly access the engine, filters, fill points, and all other service points through a single point of access. The skid steer also offers Case’s easy-tilt cab for convenient access to the drivetrain compartment. For more information, visit CaseCE.com/alpha.
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
NORRIS SALES COMPANY www.norrissales.com 1010 Conshohocken Road • Conshohocken 19428 610/279-5777
NEW JERSEY
PENN JERSEY MACHINERY www.pennjerseymachinery.com 847 Rt. 12 • Frenchtown, NJ 08825 908/824-4200 • Fax: 908/218-1959
NEW HAMPSHIRE
CHAPPELL TRACTOR SALES www.chappelltractor.com 454 Route 13 South • Milford, 03055 603/673-2640 • Fax 603/672-0019
Construction Equipment Guide • Skid Steers, Compact Track Loaders & Attachments Section • www.constructionequipmentguide.com • April 19, 2017 • Page 93
Pros K Pro Kno no ow w! w !
®
Thos Thos se in the se the know know, know know Ta akeuch keu ke uch hii
TTough Tough, ough, PPoower ow ow weerfful, ful ul, Dependab Dependable ble
DELAWARE
MARYLAND B F G U
(800) 737-0049 (800) 218-9462 (800) 951-2550 (800) 756-9433
FOLCOMER EQUIPMENT CORP. www.folcomerequipment.com 12420 Sussex Highway Greenwood, 19950 800/756-9433
NEW YORK B F G U
(800) 737-0049 (800) 218-9462 (800) 951-2550 (800) 756-9433 (800) CASE-580
FOLCOMER EQUIPMENT CORP www.folcomerequipment.com 629 S. Phila. Blvd Aberdeen, 21001 410/575-6580
Upper Marlboro, 20772 301/627-3938 Baltimore, 21227 410/247-7454 Frederick, 21704 301/682-4441 B ‘ 0 hours………………..…..$ S
ALL ISLAND EQUIPMENT www.allislandequipment.com 39 Jersey Street • West Babylon 11704 631/643-2605 • Fax 631/643-4060
S S
B
< Find out what others know, visit takeuchi-u us.com for more info >
Page 94 • April 19, 2017 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide
MODEL
OPERATING LOAD LBS. (KG)
ENGINE POWER HP (KW)
OPERATING WIDTH IN. (CM)
1,300 (590) 1,600 (725) 1,800 (818) 2,000 (905) 2,100 (905) 2,800 (1,020) 3,400 (1,542)
49 (36) 60 (45) 60 (45) 67 (50) 74 (55) 74 (55) 90 (67)
59.8 (151.8) 59.8 (151.8) 66.1 (167.8) 69.1 (175.5) 69.1 (175.5) 69.6 (176.8) 76 (193.0)
COMPACT TRACK LOADERS C227 2,700 (1,225) C232 3,200 (1,451) C234 3,400 (1,542) C238 3,800 (1,723)
74 (55) 74 (55) 90 (67) 90 (67)
65.9 (167.6) 76 (193.0) 76 (193.0) 76 (193.0)
64 (47.7) 74.3 (55.4)
69 (175) 75 (191)
NEW HOLLAND L213 L216 L218 L220 L221 L228 L234
KUBOTA Kubota SSV65 Skid Steer Kubota SSV75 Skid Steer
1,950 @50% (885) 2,690 @50% (1,220)
CHART from page 78
TH
OPERATING LOAD LBS. (KG)
MODEL
ASV SSL MODEL RS-50 RS-60 RS-75 VS-60 VS-75 DEL CTL/MTL MO RT-30 RT-50 RT-60 VT-70 RT-75 RT-75HD RT-120 RT-120 Forestry
GEHL Gehl 3640E Gehl R105 Gehl R135 Gehl R150 Gehl R165 Gehl R190 Gehl R220 Gehl R260 N:2 Gehl V270 GE N:2 Gehl V330 GE Gehl V400 Gehl V420
YAMMAR S165R-1 S190R-1 S220R-1 S270V-1
1,650 (748) 2,000 (907) 2,600 (1,179) 2,300 (1,043) 3,500 (1,587) 665 (302) 1,600 (725) 1,900 (861) 2,328 (1056) 2,650 (1,203) 2,650 (1,203) 3,535 (1,603) 3,745 (1,699)
1,050 (476) 1,050 (476) 1,350 (612) 1,500 (680) 1,650 (748) 1,900 (862) 2,200 (998) 2,600 (1179) 2,700 (1225) 3,300 (1497) 4,000 (1814) 4200 (1906)
1,650 (748) 1,900 (862) 2,200 (998) 2,700 (1225)
ENGINE POWER HP (KW)
50 (37.3) 60 (44.7) 74 (55) 60 (44.7) 74 (55) 32.7 (25.1) 50 (37.3) 60 (44.7) 65 (48.6) 74 (55) 74 (55) 120 (89.5) 120 (89.5)
35 (26) 35 (26) 46 (34.5) 46 (34.5) 69.9 (52) 69 (51.7) 72 (53.7) 72 (53.7) 72 (53.7) 72 (53.7) 99 (74) 120 (90)
69.9 (52) 69 (51.7) 72 (53.7) 72 (53.7)
TH OPERATING WID ) IN. (CM
OPERATING LOAD LBS. (KG)
MODEL
ENGINE POWER HP (KW)
BOBCAT 66 (167.64) 66 (167.64) 72 (182.88) 66 (167.64) 72 (182.88) 48 (121.92) 60 (152.4) 66 (167.64) 65.6 (166.63) 70 (177.8) 70 (177.8) 71 (180.34) 73 (185.42)
48.4 (123) 48.4 (123) 52.6 (134) 63.2 (161) 63.2 (161) 64.5 (164) 65.5 (166.4) 65.5 (166.4) 69.5 (176.5) 72 (183) 79.5 (202) 79.5 (202)
63.2 (161) 64.5 (164) 65.5 (166.4) 69.5 (176.5)
LOADERS 700 (318) SKID STEER 0 1,300 (590) S7 1,750 (794) S450 1,950 (885) S550 2,100 (953) S570 2,200 (998) S590 2,180 (989) S595 2,690 (1,220) S630 3,100 (1,406) S650 3,350 (1,520) S740 3,950 (1,792) S770 3,325 (1,508) S850 A770 S ACK LOADER 00 (635) COMPACT TR 1,4 T450 1,995 (905) T550 2,100 (953) T590 2,200 (998) T595 2,100 (953) T630 2,570 (1,166) T650 3,200 (1,451) T740 3,325 (1,508) T750 3,475 (1,576) T770 3,525 (1,599) T870
I TAKEUCH SSL MODEL 2,825 (1,281) TS80R2 3,500 (1,588) TS80V2 S ACK LOADER 0 (1,365) COMPACT TR 3,01 TL8 3,600 (1,635) TL10V2 4,315 (1,955) TL12R2 4,107 (1,863) TL12V2
OPERATING WID IN. (CM)
23.5 (17.5) 49 (36.5) 61 (45.5) 61 (45.5) 66 (49.2) 74 (55.2) 74 (55.2) 74 (55.2) 74 (55.2) 92 (68.6) 100 (74.6) 92 (68.6) 61 (45.6) 66 (49.2) 66 (49.2) 74 (55.2) 74 (55.2) 74 (55.2) 74 (55.2) 85 (63.4) 92 (68.6) 100 (74.6)
74 (55) 74 (55) 74.3 (55.4) 74.3 (55.4) 111.3 (83) 111.3 (83)
35.5 (90.2) 58.6 (148.8) 64.7 (164.3) 64.7 (164.3) 65.2 (165.6) 65.2 (165.6) 72.1 (183.1) 72.1 (183.1) 72.1 (183.1) 72.1 (183.1) 79 (200.6) 74.7 (189.7) 55 (139.7) 67 (170.2) 67 (170.2) 67 (170.2) 72.9 (185.2) 72.9 (185.2) 78 (198.1) 78 (198.1) 78 (198.1) 83 (210.8)
72 (182.9) 72 (182.9) 65.4 (166.1) 68.5 (173.9) 77.2 (196.0) 78.0 (198.1)
Construction Equipment Guide â&#x20AC;¢ Skid Steers, Compact Track Loaders & Attachments Section â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ April 19, 2017 â&#x20AC;¢ Page 95
200 Merrimac Street Woburn, MA 01801
C.N. WOOD CO., INC. Whately, MA
781/935-1919 Johnston, RI
413/665-7009 Avon, MA
401/942-9191 www.cn-wood.com
508/584-8484
18 Blackstrap Road Falmouth, MEâ&#x20AC;&#x2C6;04105
JORDAN EQUIPMENT CO. 207/797-2240 Fax: 207/878-3506 35 Daves Way Hermon, ME 04401
744 Clough Mill Road Pembroke, NHâ&#x20AC;&#x2C6;03275
207/848-9036
www.jordanequipment.com
603/228-3377
2820 Hamilton Blvd. South Plainfield, NJ 07080
KOMATSU NORTHEAST 201 North Route 73 Winslow Township, NJ 08095
908/561-9000
www.komatsune.com
856/767-5900
© 2008 ESCO Corporation.
W DELIVER WE
unmatched worksite performance. 6, 7 and 8 Foot Models 317G Compact Track Loaader â&#x20AC;¢ )LQDO 7LHU HPLVVLRQ FHUWL÷HG G HQJLQH â&#x20AC;¢ Clear sightlines above and beelow boom â&#x20AC;¢ Optimized power-to-weight ratio r â&#x20AC;¢ Swing-out hydraulic coolers
START TARTING AT AT
549 9
$
/MONTH H*
HudsonRi verTrac tor Company.com 1-877-556-4384
FULTONVILLE 3021 Route 5 S | (518) 853-3405
GOSHEN 25 6 1 1/2 Station Road | (845) 294-2500
CHA ATHAM 2173 Route 203 | (518) 392-2505
SCHAGHTICOKE 11853 State Route 40 | (518) 692-2676
CLIFTON PARK 1917 Route 9 | (518) 877-5059
*Offer valid on new base 317G 7G Compact Track Loader purchases made between /1/2016 and d /2017. Subject to approved installment credit with John h Deere Finaancial.l Up to a 20% d down payment mayy b be required. Example: based b on a purchase h off $$45,975 with h $9,195 down payyment, monthlyy paymen nt of $549 at 1.99% APR for 72 months. h Taxes, freight, set up p aand deliver y charg ges could increase the monthly payment. Price and model availability l vary by d dealer. Valid only at participating US dealers. Some restrictions apply. l Othe her offers available. l See S your local John Deere dealer I FRPSOHWH GHWDLOV DQG RWKHU ÷QDQFLQJ RSWLRQV )RU FR IRU RPPHUFLDOO XVH RQO\ )35 9 $&2 $ $81
Page 96 • April 19, 2017 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide
UPCOMING SPECIAL SECTIONS ISSUE
10
Attachments Ad Closing Date Publishing Date
ISSUE
12
Compressors, Gens, LTs Ad Closing Date Publishing Date
ISSUE
14 16 18
June 30, 2017 July 12, 2017
Backhoes Ad Closing Date Publishing Date
ISSUE
June 5, 2017 June 14, 2017
Wheel Loaders Ad Closing Date Publishing Date
ISSUE
May 8, 2017 May 17, 2017
July 31, 2017 August 9, 2017
Underground Utility Ad Closing Date Publishing Date
August 20, 2017 September 6, 2017
Construction Equipment Guide • Skid Steers, Compact Track Loaders & Attachments Section • www.constructionequipmentguide.com • April 19, 2017 • Page 97
Abbottstown
Carlisle
Elizabethtown
Halifax
7481 Lincoln Hwy.
2510 Ritner Hwy.
187 Merts Drive
3882 Peters Mtn. Rd.
17MLMF02-44-MNHCEG-1
4 Convenient Locations in Pennsylvania
800.222.3373 • www.messicks.com MDR24
BC285.5
BACK-FILLER
BRUSH CUTTER
MDR24
ST7
COMPOSTER
SNOW THROWER Modern Group Ltd. www.moderngroup.com
2501 Durham Road • Bristol, PA 19007 1-800-866-3376 3480 Board Road • York, PA 17406 1-800-233-9417 112-128 Route 17 North Hasbrouck Heights, NJ 1-800-233-0197 75 New Street • Edison, NJ 08837 1-800-846-5840
Asphalt Paving Equipment & Supplies, Inc. www.apeasi.com
412 Meco Drive Wilmington, DE 19804 302-683-0105 • Fax: 302-683-0107 26822 Lewes Georgetown Hwy Harbeson, DE 19951 302-664-1552 • Fax: 302-664-1554
Penn Equipment
www.pennequipment.biz 100 Windmill Hill Burnham, PA 17009 717-248-8876 Fax: 717-248-8916
Page 98 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Komptech Americas Recognizes Three Dealer Award Winners During ConExpo
MILTON CAT www.miltoncat.com
Komptech Americas recognized the achievements of three exceptional individuals during the company’s customer appreciation event held at ConExpo-Con/AGG 2017. The “Salesperson of the Year” award was presented to Ryan Puckett, area manager at Henderson, Colo., based Power Screening LLC. Puckett is the first two-time winner of this award, which originated in 2008 and recognizes the Komptech Americas dealer representative with the highest total machine sales volume each year. “Ryan’s leadership skills and accomplishments with the Komptech product line are all that you could ask for in a dealer,” said Komptech Senior Area Sales Manager, Todd
Ryan Puckett (R) of Power Screening LLC receives the Salesperson of the Year award from Komptech Americas’ Brandon Lapsys.
Komptech Americas’ Brandon Lapsys (L) and Todd Dunderdale (R) present Bejac Corporation’s Mike Smith with the Spirit of Komptech Award.
Dunderdale. “Year after year, Ryan has demonstrated an ability to build customer relationships and sell a wide range of product types into the marketplace, which is a testament to his work ethic and dedication.” Mike Smith, sales representative at California-based Bejac Corporation was honored with the first annual “Spirit of Komptech” award which was created in memory of Komptech’s late founder, Josef Heissenberger. This distinction recognizes the dealer representative who best demonstrates the ideals and passion of Komptech. “Mike’s willingness to always go above and beyond to support his customers, coupled with his vast product knowledge and passion for the industry is exemplary,” said Dunderdale. “He embodies what this award is all about and we could not have a better representative as the inaugural recipient.” The award for “Service Technician of the Year” was presented to Keith Hennen, owner of Hennen Equipment in Chaska, Minn. Hennen is a two-time winner of this award, which recognizes service excellence, technical expertise and an unwavering commitment to the industry. “Keith is a true professional with an outstanding work ethic and deep knowledge of the Komptech product line,” said Komptech Area Sales Manager Garrett Lapsys. “He works closely with his customers to consistently provide reliable support and does whatever it takes to make sure their equipment is running smoothly.” For more information, visit komptechamericas.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Contractor and recycling customers in ME, RI, VT, NH, MA and state of NY , excluding New York City and surrounding counties 100 Quarry Drive Milford, MA 01757 508-634-3400 14 Kendrick Road Wareham Industrial Park Wareham, MA 02571 508-291-1200 84 Concord Street North Reading, MA 01864 978-276-2400 2158 Plainfield Pike Commerce Park W #10 Cranston, RI 02920 401-946-6350 Route 2, One Cat Lane Richmond, VT 05477 802-434-4228 30 Industrial Drive Londonderry, NH 03053 603-665-4500
16 Pleasant Hill Road Scarborough, ME 04070 207-883-9586 79 Robertson Blvd. Brewer, ME 04412 207-989-1890 500 Commerce Drive Clifton Park, NY 12065 518-877-8000 294 Ainsley Drive Syracuse, NY 13210 315-476-9981 55 Industrial Park Drive Binghamton, NY 13904 607-772-6500 4610 E. Saile Drive Batavia, NY 14020 585-815-6200
H.O. PENN MACHINERY CO., INC. www.hopenn.com Contractor and recycling customers in lower thirteen counties of NY state, and in the state of CT 122 Noxon Road Poughkeepsie, NY 12603 845-452-1200 699 Brush Avenue Bronx, NY 10465 718-863-3800 783 Bloomingburg Road Bloomingburg, NY 12721 845-733-6400 660 Union Avenue Holtsville, NY 11742 631-758-7500 225 Richard Street Newington, CT 06111 860-666-8401 Contact our Aggregate Specialists In CT call Scott Gilligan 860-461-6534 In NY state call Kevin Kretschmer 646-315-2284
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 99
MELLOTT COMPANY www.mellotts.com Aggregates, quarry, contractor & recycling customers in MD, VA, WV, DE, and NC. Aggregates and quarry customers in NJ and NY, excluding New York City and surrounding counties. 100 Mellott Drive Warfordsburg, PA 17267
4501 Green Point Drive Greensboro, NC 27410
Lokotrack® ST2.8™ exceeds expectations in making a clean cement additive That’s how we make the big difference, the Metso Way.
800-634-5634
FOLEY, INC. www.foleyinc.com
A Lokotrack ST2.8 mobile scalping screen is helping a cement plant produce a clean additive for its production process, resulting in significant cost savings. The operator is saving up to $20 a ton by producing the additive using the ST2.8, rather than buying it from an outside source.
Contractor and recycling customers in the state of NJ 855 Centennial Avenue Piscataway, NJ 08855 info@foleyinc.com
732-885-5555
The Lokotrack ST2.8 has a larger throw than most machines in its size class, which allows it to produce a cleaner end product. The unit’s powerful Caterpillar C4.4 diesel engine meets the latest emissions standards, and a new hydraulic system helps to reduce fuel consumption. Find out more about profitable mobile screening at metso.com/showroom/aggregates
WHITNEY & SON, INC. www.whitneyandson.com Aggregates and quarry customers in CT, MA, ME, NH, RI, & VT 95 Kelley Ave. Fitchburg, MA 01420
800-245-5472 978-343-6353 info@whitneyandson.com
CB
Con-Agg
CB CON-AGG www.cbconagg.com Aggregates, quarry, contractor and recycling customers in the state of PA 5300 Paxton Street Harrisburg, PA 17111 717-564-2121
4565 William Penn Hwy. Murrysville, PA 724-327-1300
Old Town Rd & Rte. 879 Clearfield, PA 814-765-1611
168 Industrial Park Road
11 Progress Drive Cranberry Twp., PA 724-776-7660
2955 Stewart Drive State College, PA 814-237-8338
3950 Depot Road Erie, PA 814-898-3388
Rt. 54 & I 180 (Exit 5) Turboville, PA 570-538-2551
1500 S. Altamont Blvd. Frackville, PA 570-874-3560
Wilkes-Barre Twp. Blvd. Wilkes-Barre, PA 570-822-8141
145 Rose St. Indiana, PA 724-463-8743
4326 Oregon Pike Lancaster, PA 717-859-4905
3105 Route 219 Lantz Corners, PA 814-778-5250
309 Foothills Lane Mount Pleasant, PA 724-696-4080
US Rt. 6 East Mansfield, PA 570-662-7171
441 Route 315 Hwy. Pittston, PA 570-883-1044
Somerset, PA 814-445-7915
#TheMetsoWay
Page 100 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Bridge Rehabilitation Part of I-81 Improvement Plan PLAN from page 1
are in the ground and work is underway to widen I-81 between U.S. 11 in West Virginia and MD 63 in Maryland,” said Hogan. “These improvements to I-81 are critical infrastructure investments that will help citizens here in Washington County, across western Maryland, and all across our state go about their daily lives in a faster, more efficient, and safer manner.” SHA noted that I-81 is a critical link for West Virginia and western Maryland and serves a significant freight and commercial corridor. Once complete in summer 2020, the 5-mi. (8 km) segment of I-81, including the bridges over the Potomac River and at Lappans Road, will have a total of six travel lanes. The project includes reconstructing the I-81 interchange with MD 63/MD 68 to accommodate the new lanes, installing storm water management systems and upgrading lighting, signs and guardrail to enhance safety along this corridor. According to Charlie Gischlar, SHA’s public information officer, much of the bridge work will be done under the bridge and behind a concrete barrier in the median. In addition, SHA is utilizing a floating access bridge so that traffic is not impacted on top of the bridge during construction. Work will include widening 5 mi. of I-81 from U.S. 11 in West Virginia to north of the MD 63 (Greencastle Maryland State Highway Administration photo Pike)/MD 68 (Lappans The bridges were originally constructed in 1965. Road) interchange in
completion is planned for the summer of 2020. According to the SHA, the average daily traffic volume in 2016 was 64,000, 28 percent of which was truck traffic. The 2030 projection is 91,500, 28 percent of which is truck traffic. The speed limit on the road is 55 mph. The bridges were originally constructed in 1965. Maryland Gov. Larry Hogan and Deputy Transportation Secretary James F. Ports Jr., announced the start of construction in December. The project is the first phase of improvements to enhance safety and relieve traffic congestion along the heavily-traveled corridor. The governor also announced Maryland’s recent application for a federal FASTLANE construction grant to help fund the next phase of the project. “I am pleased to announce that shovels
Maryland. SHA also will replace the bridge decks and structural steel for the existing portion of the I-81 bridges over the Potomac River and MD 63/MD 68 to add a third travel lane plus full-width shoulders. The project will connect to West Virginia Department of Transportation’s previous I81 widening project. The I-81 widening will not extend north to I-70 with this phase. Maryland is considering this “Phase 1” of I81 widening that stops just north of the Exit 1 northbound on-ramp and also just north of the southbound off-ramp. “Phase 2,” which goes farther north to I-70, has been funded for $5M in design. Phased construction will involve widening the bridges to the inside, then shifting the two lanes of traffic onto the new portion of the bridge while crews replace the existing structural steel and roadway surfaces. The bridge structures are more than 1,136 ft. (346 m) long and provide clear roadway widths between barriers of 30 ft. (9 m). The bridges cross the C&O Canal National Historic Park, the Potomac River, and extend into West Virginia. This project is being coordinated with the National Park Service and West Virginia. SHA noted that while the bridges are not currently structurally deficient, the roadway surface for each bridge is 47 years old. Since they carry heavy truck traffic, they are beginning to show signs of advancing deterioration with the need for patching. “Considering the narrow width of the existing bridges, we studied how the bridge improvement operations could best be completed with minimal disruption to traffic,” the website stated. “After widening each bridge into the median to carry the current two lanes of traffic, we are able to complete
Maryland State Highway Administration photo
The contract calls for widening the road from four to six lanes, including the I-81 bridges over the Potomac River.
the replacement of the existing bridge surface in a single phase. The end result will be bridges capable of carrying a future third lane widening with full width shoulders along I-81 for both directions through Maryland into West Virginia.” According to SHA, these bridges are see PLAN page 134
Maryland State Highway Administration photo
Maryland State Highway Administration photo
The Maryland State Highway Administration is in the early stages of widening I-81 (Maryland Veterans Memorial Highway) and rehabilitating several bridges in the Williamsport area of Washington County.
The SHA has worked closely with the National Park Service’s C&O Canal staff to ensure that there is limited disturbance to the canal.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 101
CASE AUTHORIZED DEALERS ALERS
Highest Retained Value Award
Delaware
Pennsylvania
EAGLE POWER & EQUIPMENT New Castle (302) 652-3028
EAGLE POWER & EQUIPMENT Chester Springs (610) 458-7054 Montgomeryville (215) 699-5871
FOLCOMER EQUIPMENT Greenwood (302) 349-5760
™
2017
TAN
.
Maine BEAUREGARD EQUIPMENT Hermon (207) 848 848-2050 2050 Scarborough (207) 885-0600
Maryland FOLCOMER EQUIPMENT Aberdeen (410) 575-6580 Baltimore (410) 247-7454 Upper Marlboro (301) 627-3938
(610) 395-3775
Massachusetts
Vermont BEAUREGARD EQUIPMENT Colchester (802) 893-1555
Virginia
BEAUREGARD EQUIPMENT Concord (603) 225-6621
LAW AWRENCE EQUIPMENT Ashland (804) 752-8333 Bridgewater (540) 515-9670 Cloverdale (540) 966-0151 Suffolk (757) 539-0248 Waynesboro (540) 942-2610
TOWNLINE EQUIPMENT Plainfield (603) 675-6347
West Virginia
New Hampshire
New Jersey GROFF TRACTOR NJ Freehold (732) 780-4600 Totowa (973) 785-4900 Vineland (856) 697-1414 POWERCO Clinton
(908) 735-2149
New York HOFFMAN EQUIPMENT Bronx (718) 822-1180 Marlboro (845) 236-3000 Medford (631) 207-2900 MONROE TRACTOR Binghamton (607) 754-6570 754 6570 Buffalo (716) 681-7100 Henrietta (585) 334-3867 Horseheads (607) 739-8741 Latham (518) 785-8013 North Syracuse (315) 452-0000
©2017 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates.
POWERCO Allentown
GROFF TRACTOR Frederick (301) 663-3185
ROBERTT C CHILDS South Dennis (508) 398-2556
CaseCE CE.c .com om
MEDICO INDUSTRIES Stroud Tw Twp (570) 420-0877 Wilkes-Barre (570) 825-7711
WA W ARNER TRACTOR Troy (570) 297-2141
CASE OF NEW W EN ENGLAND Sh Shrewsbury b (508) 845-4343 845 4343 Woburn (781) 933-4217
LOW TCO + HIIGH ROII
GROFF TRACTOR Bellefonte (814) 353-8400 Cranberry Tw Twp (724) 898-1535 Ebensburg (814) 472-7300 Ephrata (717) 738-0220 Mechanicsburg (717) 766-7671 New Stanton (724) 755-0124
STTA ATE EQUIPMENT Beaver (304) 252-5300 Cross Lanes (304) 776-4405 Parkersburg (304) 422-4093 Shinnston (304) 592-0491
Page 102 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Security Checkpoints Part of Reagan’s ‘Project Journey’
The passenger seating area will have large windows offering views of Washington, D.C. JOURNEY from page 1
and parking configurations. “Reagan National’s passenger areas were designed to serve 15 million passengers annually,” said Jack Potter, Airports Authority president and CEO. “Today, more than 23 million passengers travel through the airport — straining its infrastructure, crowding travelers and hampering our ability to provide best-in-class customer service. Project Journey will transform and improve the passenger experience.” Design has been completed for two new security checkpoints that will be constructed above the Terminal B/C arrivals roadway and connected to National Hall and walkways from the Metrorail station and parking
garages. Upon activation, the new checkpoints will expand capacity from 20 to 28 security lanes, expediting the screening process and creating a seamless, free-flowing environment between Terminal B/C airline concourses and the new commuter concourse. The resulting connectivity is designed to provide passengers an improved post-security experience — alleviating gate area congestion while expanding access to a variety of shopping and dining options. Project Journey also will replace the 14 outdoor aircraft boarding positions accessed by bus through Gate 35X with a new commuter concourse. New video and detailed renderings of the concourse designs were unveiled at the board meeting. The con-
Seating, gates, concessions space
Passengers enter the new commuter concourse from the existing National Hall
course will provide regional travelers with direct, enclosed access to planes via jet bridges, spacious waiting and boarding areas, diverse seating options with integrated power outlets and new concessions. The concourse design includes architectural features consistent with the Terminal B/C’s exposed metal beams, glass walls and domed ceilings while maximizing open, navigable gate areas and panoramic views of downtown Washington, D.C. “Passengers are at the center of everything we do,” said Paul Malandrino, vice president and airport manager of Reagan National. “While construction will take time and have some impacts along the way, the final product will provide a much more pleasant cus-
tomer experience at the airport. We will work closely with contractors, airlines and the TSA throughout the project to manage the construction in order to minimize airport passenger and operational disruptions.” The project will occur in two concurrent phases. The first, comprised of the new security checkpoints, is planned to open in 2020, while the commuter concourse is scheduled for completion in 2021. “Project Journey is born out of our motto, ‘your journey begins with us’ because we recognize travels are shaped, in part, by the experience individuals have in our airports. That is why Project Journey is critical to our mission as we continuously work to upgrade see JOURNEY page 124
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 103
ASPHALT CARE EQUIPMENT & SUPPLIES
BARRY EQUIPMENT COMPANY, INC.
E.W. SLEEPER COMPANY, INC.
2765 Galloway Road Bensalem PA 19020 215/639-9800 1-800/223-1202 Fax: 215/639-9802 www.asphaltcare.com
30 Birch Island Road Webster, MA 01570 508/949-0005 Fax: 508/943-9072
391 Loudon Road Concord, NH 03302 603/225-3361 800/358-6007 Fax: 603/225-4918 www.ewsleeper.com
www.barryequipment.com
EQUIPMENT EAST, LLC 61 Silva Lane Dracut, MA 01826 978/454-3320 Fax: 978/454-3325 www.equipmenteast.com
PITTSFIELD LAWN & TRACTOR 1548 W. Housatonic St. Pittsfield, MA 01201 413/443-2623 Fax: 413/499-0023 www.plt.com
Page 104 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Chevron’s ISOCLEAN Could Help Extend Equipment Life
RUN ST RONG. Packed with features that operators demand, Doosan® crawler excavators bring streng th to ever y job. See machines, features and specs:
DoosanEquipme m nt.com/MyExcavator
Authorized Doos an Dealer s
MAR RY YLA AND
NEW YOR YORK
H&E Equipment Services S Baltimore 410-355-3800
Capital Tractor, Inc. Greenwich 518-692-9611
www.HE-equipme ent.com
www.capitaltractorinc.com
MASSACHUSETTS
Hoffman Equipment Co. Medford 631 631-207-2900 207 2900
Barry Equipme ent Co. Webster 508-94 49-0005 www.barryequipm ment.com
Equipment Eas st, LLC Dracut 978-454-3320
www.hoffmanequip.com
Robert H. Finke and Sons, Inc. Selkirk 518-767-9331 www.finkeequipment.com
www.equipmenteast.com
VIRGINIA
NEW JERS SEY
H&E Equipment Services H W Warrenton 540-349-2878
Hoffman Equipm ment Co. Piscataway 732-7 752-3600 www.hoffmanequ uip.com
Doosan ® and the Doosan logo are re gistered trademarks of Doosan Corp. in the United States and various other counntries around the world. ©2017 Doosan Construction Equipm ment. All rights reserved. | 54091-3
www.HE-equipment.com
Chevron Products Company, a Chevron help customers understand the effects of parU.S.A. Inc. division, and Noria, a worldwide ticle contamination and prevent premature leader in providing lubrication consulting equipment wear and failure,” said Doug services and training, announced the launch Hinzie, VP Americas Lubricants at Chevron of the ISOCLEAN Calculator, a tool that Products Company. “This tool provides helps companies evaluate possible equip- actionable information that helps our cusment life based on lubricant cleanliness lev- tomers improve their bottom line by reducels. The easy-to-use tool was developed by ing unscheduled downtime, and increasing Chevron Products Company and is powered equipment life.” by Noria’s life extension tables to help calcuChevron’s ISOCLEAN program includes late the levels of particle contamination that ISOCLEAN certified lubricants, which have are typical for each user’s specific situation. been certified to meet the fluid cleanliness “We have worked closely with Chevron requirements of OEMs, and ISOCLEAN to create a tool that will leverage the compre- services, which are in-plant services hensive cleanliness data base of our life designed to clean up and manage contaminaextension tables, but in an easy to use format that is very intuitive and simple,” “This tool provides actionable said Mike Ramsey, president of Noria. “We have found information that helps our that most users have no idea how contaminated their customers improve their bottom lubricants really are, and how harmful that can be to line by reducing unscheduled their equipment. This downtime, and increasing resource is a great way to easily calculate the cleanli- equipment life.” ness levels, so that customers can take action to Doug Hinzie help maximize their equipChevron Products Company ment life.” Considering that the number one cause of lubricant-related failures in tion of in-service lubricants and operating equipment is contaminant particles, the ISO- systems. Chevron’s ISOCLEAN certified CLEAN calculator is crucial in helping users lubricants meet a specific ISO cleanliness understand their specific challenges and how code at the point of delivery, which repreto overcome unique obstacles for maximum sents the most stringent cleanliness standards efficiency. Noria’s life extension tables sum- and specifications for lubricants placed in marize the effect of contaminant particles on equipment that are required by several leadthe expected service life of hydraulics, gears, ing OEMs. An important first step in controlrolling element bearings and journal bear- ling lubricant contamination is starting with ings. a certified lubricant. These products help reduce the expense and manpower required How the ISOCLEAN by end customers to pre-filter non-certified Calculator Works lubricants to meet OEM requirements. A simple three-step process collects all the Chevron offers more than 60 ISOCLEAN relevant information of a user’s industry, certified lubricants for critical equipment equipment type and components, and the components from hydraulics to gear oils to conditions that are relevant to the lubricant synthetics for a variety of industries: agriculused in their operations. Based on the data ture, construction, manufacturing, mining, selected, the ISOCLEAN calculator delivers petrochemical refining, power generation, a results report that is customized to each user, providing the target ISO cleanliness and waste hauling. ISOCLEAN Certified code compared to the current one, visuals of Lubricants give customers the opportunity to the magnified patch samples of each, and significantly extend equipment component current lifespan of the equipment versus life by 2 to 4 times in most cases. For more information, visit www.chevrowhat it could achieve using Chevron’s ISOnisoclean.com. CLEAN certified lubricants. (This story also can be found on “By utilizing the powerful data from Noria, the new ISOCLEAN calculator is just Construction Equipment Guide’s website at the latest addition to our ongoing efforts to www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 105
WITHH THEE RIGHT TOOLS TO INVEST STT,, YOU CANN PUT THEE RIGHT TOOLS TO WORK. Volvo olv Financial Services offers 0% for 24-months on select Volv Volvo D-Series excavators and G-Series wheel loaders. Low-interest rates and high-quality equipment create the perfect combination for your business. Contact your local V Volv olvo dealer today to get the right tools for you. Final approved transaction terms are subject to standard VFS credit underwriting guidelines and advance policy. VFS reserves the right to amend or cancel the program at any time without notice. Approvals will state the program terms and any other conditions deemed appropriate by VFS.
Page 106 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Empire State Names Team for Javits Center Expansion JAVITS from page 1
“The Javits Center is one of New York State’s greatest economic assets, and this project will turn this building into a 21st century marvel, a convention center of the caliber that New York deserves,” said Zemsky. “With these new state-of-the-art facilities, we will be able to attract the world’s best conferences and events and drive economic activity throughout the region for decades to come.” “For the past 30 years, the Javits Center has fueled the Empire State’s economic engines, and thanks to Gov. Cuomo’s vision, we will unlock this New York icon’s true potential and host the most dynamic events anywhere in the world,” said Alan Steel, president and CEO of the New York Convention Center Operating Corporation, which operates the Javits Center. “With a recent renovation and a rapidly changing West Side neighborhood, there has never been better time to visit the Javits Center, and this new project will showcase our spaces to new audiences for generations to come.” Under the winning proposal, the expansion will provide new, state-of-the-art exhibit and meeting room spaces to attract higherspending, large-scale trade shows and conventions, while enhancing the quality of life for the West Side community. In addition, the construction of an onsite truck marshaling, loading and storage facility will relocate 20,000 event-related trucks off area streets each year, improving neighborhood traffic flow and pedestrian safety. As a result, the move-in and move-out process for events will be reduced by 30 percent, leading to an additional 20 days for new events and additional economic activity. The New York Convention Center Development Corporation administered a comprehensive procurement process for the expansion project following a request for proposals issued in June 2016. The evaluation process included five technical committees comprised of 33 experts who evaluated the competing proposals in five different areas: proposed design; project schedule; project plans and approach; MWBE/SDVOB approach; and the bidding team’s experience and financial strength. A sixth committee evaluated the bidders’ financial proposals. A blue-ribbon selection panel, comprised of government and industry leaders, received the committee’s evaluations, and after thorough consideration, ranked the proposals and selected the winning bidder. The six panel members were: • Phil Eng, executive deputy commissioner, New York State Department of Transportation; • Lois McLaughlin, director,
MWBE opportunities program, state university construction fund; • Alan Steel, president and CEO, New York Convention Center Operating Corporation; • Marilyn Jordan Taylor, professor of architecture and urban design and former dean of the school of design, University of Pennsylvania; • Dan Tishman, principal and vice chairman of Tishman Realty Partners and vice chairman of AECOM; and • Howard Zemsky, president and CEO, Empire State Development. Following a vote by the board of directors of the New York Convention Center Development Corporation to approve the panel’s recommendation, the contract was awarded to LendLease Turner. TVS is the design firm included in the LendLease Turner consortium. The winning proposal provided significant design, logistical and operational benefits, including increased atrium space, integrated public and support spaces and a commitment to maintaining current operations during all phases of construction. The expansion project will be funded through a combination of state appropriation and bond issuance proceeds. The project includes the following major components: • an on-site truck marshaling facility that can hold a minimum of 229 trucks that haul exhibit materials to and from the Javits Center;
Seating, gates, concessions space
• 90,000 sq. ft. (8,361 sq m) of permanent exhibit space, to be combined with the existing exhibit space, to create an approximately 500,000-sq.-ft. (46,452 sq m) exhibition hall; • 45,000 sq. ft. (4,181 sq m) of stateof-the-art meeting room space; • 55,000 sq.-ft. (5,110 sq m) ballroom, the largest of its kind in the New York region; • green roof terrace and pavilion accommodating 1,500 people for outdoor events; • 27 new loading docks; • new kitchen and food service areas; • back-of-house and administrative space; and • LEED Silver certification. The first phase of work, which will ready the site for the expansion, has begun, including critical utility work and the construction of a new three-story building that will house transformers, backup generators and other electrical equipment needed for the expanded convention center. This first phase was the result of a request for proposals issued in September 2016, and following a thorough procurement process, Tishman Construction, an AECOM Company, was selected to oversee this work. Overall, the expansion will strengthen the regional economy, create more permanent jobs and increase tourism and business involved with the Javits Center. This project
also builds upon the progress of the building’s recent renovation, which included the installation of new façade, flooring, mechanical and sustainability systems, as well as a 6.75-acre green roof that has become a sanctuary for area wildlife. Specifically, the expansion is projected to: • create 4,000 full-time jobs, 2,000 part-time jobs and 3,100 construction jobs; • generate $393 million in new economic activity a year; and • generate 200,000 additional hotel room nights a year. The Javits Center is the busiest convention center in the United States and hosted events on 337 days in 2015. Located on Manhattan’s West Side on 11th Avenue between West 34th and West 40th Streets, the six-block facility encompasses 2.1 million sq. ft. (1.95 million sq m), of which 840,000 sq. ft. (78,039 sq m) is exhibition space. It hosts trade shows, conventions, and special events that spur economic activity and job creation. In 2015, the facility hosted more than 175 events and two million visitors — ultimately supporting 17,700 jobs locally and generating an estimated 483,000 nightly hotel room reservations. In total, the Javits Center had an economic impact of $1.9 billion in 2015. For more information, visit regionalcouncils.ny.gov and esd.ny.gov. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 107
COME OUT AND
PLAY! ICUEE 2017 | Louisville, Kentucky | October 3-5 There’s only one place you can play with all the new toys in the construction and utility industry before you buy them — ICUEE, North America’s Premier Utility Demo Expo. Come get your hands dirty on our 2-mile outdoor test track. Or while exploring 25 acres of exhibits. And learn about the newest technology at our indoor demo stage. Every other year we gather over 950 of the leading manufacturers. So you can come play in our sandbox.
REGISTER AT ICUEE.COM BY AUGUST 25 TO RECEIVE 50% OFF.
Page 108 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
WorksiteVR Simulator Revolutionizes Heavy Equipment Operator Training Finding and keeping trained, skilled heavy equipment operators is one of the greatest challenges facing the construction industry. With tight schedules and increased project risk there is less and less room for human error and poor performance at crucial phases like site preparation. Immersive Technologies, a global leader in advanced simulator development for heavy equipment training, is using leading edge technology to bring versatile and effective simulation based operator training to the construction field with its new virtual reality tool, WorksiteVR Simulator. Using the advantages of virtual reality combined with an advanced simulation software, Immersive Technologies has developed an engaging, highly authentic yet economical training simulator to meet the demands in the construction industry. Uses for WorksiteVR Simulator Include: • Pre-employment testing: Evaluating qualified applicants is simplified using WorksiteVR Simulator. Basic knowledge and skill levels can be easily assessed before employment or entering the field. • Skills development: Operators can develop, practice and test their skills as they work through tasks that progressively build on knowledge and skill proficiency in machine operation. • Benchmarking: Operators can compare their skills against other operators in their company or compare improvements in their own individual performance. • Bonus incentives: WorksiteVR Simulator allows operators to sharpen their skills while not in the field. Completing training modules during downtime to earn recognition, bonuses or incentives can not only improve performance in the field but can help identify motivated employees. • Assist in team assembling: Quick access to a database of the skill levels of multiple operators can assist superintendents and projects managers in putting together the right team for the right job. With minimal hardware and easy portability, WorksiteVR Simulator allows training initiatives to be carried out in multiple locations and with limited oversight. There is no need to burn fuel or cause wear to equipment for training. Operators can assess their
Folcomer Equipment Corp. www.folcomerequipment.com 629 S. Philadelphia Blvd. Aberdeen, MD 21001 410.575.6580 Baltimore, MD 410.247.7454 Upper Marlboro, MD 301.627.3938 Frederick, MD 800.951.2550 Greenwood, DE 302.349.5760
George & Swede Sales & Service www.georgeandswede.com 7155 Big Tree Rd. Pavilion (Buffalo/Rochester), NY 14525 585.584.3425 Harter Equipment Inc. www.harterequipment.com 615 State Route 33 Millstone Twp., NJ 08535 732.446.7600
With minimal hardware and easy portability, WorksiteVR Simulator allows training initiatives to be carried out in multiple locations and with limited oversight.
progress, skills deficits and strengths in real time and benchmark against desired goals. Equipment manufacturer, Komatsu has been quick to identify the value WorksiteVR represents to the construction industry. To further support the profitability and safety of its customers, Komatsu has actively supported the development of WorksiteVR Simulator including the PC200 and PC300 excavators with more machines to come. As part of a recent agreement between Komatsu Ltd. and Immersive Technologies, Komatsu branded WorksiteVR Simulators will be used and distributed via the Komatsu global distribution network. “Our 24 years in developing the most realistic heavy equipment simulation software for a wide range of OEM’s has given us the ability to deliver the most realistic virtual reality training experience. WorksiteVR Simulator has been built with the key objective of having a significant impact on our customers’ profitability and safety. The combination of highly realistic simulated environments and expertise in adult learning has led to the launch of a training tool we believe will revolutionize the construction industry,” said Peter Salfinger, CEO, Immersive Technologies. For more information, visit www.WorksiteVR.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Highway Equipment Company www.highway-equipment.com 22035 Perry Highway Zelienople (Pittsburgh), PA 724.452.7800 Dubois, PA 15801 814.371.3600
Lorusso Heavy Equipment, LLC www.lhequip.com 160 Elm St. P.O. Box 857 Walpole, MA 02801 508.660.7600 Modern Group Ltd. www.moderngroup.com 2501 Durham Rd. Bristol, PA 19007 800.866.3376 Allentown, PA 18106 610.398.1101 York, PA 17406 800.866.3376 Edison, NJ 08837 800.866.3376 Hasbrouck Heights, NJ 07604 201.288.1441 TB Equipment & Rental www.tbequipment.net 892 Odlin Rd. Bangor, ME 04401 207.262.0014
Tracey Road Equipment, Inc. www.traceyroad.com 6803 Manlius Center Rd. East Syracuse, NY 13104 315.437.1471 • 800.872.2390 Adams Center, NY 315.788.0200 • 888.335.0200 Kirkwood, NY 607.775.5010 • 800.370.9488
Using the advantages of virtual reality combined with an advanced simulation software, Immersive Technologies has developed an engaging, highly authentic yet economical training simulator to meet the demands in the construction industry.
www.hceamericas.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 109
Safety Is Priceless, Not Expensive Hyundai HX series excavators are packed with standard safety features that help your operators work more efficiently. All cabs are ROPS/FOPS certified A rearview camera, which can be viewed from the 8-inch touchscreen monitor, is standard Large grab rails and guard rails and Hyundai’s proprietary anti-slip surfaces help avoid falls while working on the outside of the machine Automatic travel backup alarm is standard
Hyundai’s exclusive All-Around View Monitoring option provides unprecedented visibility to the worksite.
More standard features. More value.
www.hceamericas.com To learn more about the safety features built into HX series excavators, contact your Hyundai dealer today. A Montano Co., Inc. www.amontanoco.com 571 Route 212 Saugerties, NY 12477 845.247.0206
All Island Equipment www.allislandequipment.com 39 Jersey St. West Babylon, NY 11704 631.643.2605
Atlantic Equipment & Supply www.aeandsupply.com 2201 Mingee Dr. Hampton, VA 23661 757.827.4778
Chappell Tractor Sales www.chappelltractor.com
454 Route 13 South Milford, NH 03055 603.673.2640
251 Route 125 Brentwood, NH 03833 800.616.5666
©2017 Hyundai Construction Equipment Americas. All Rights Reserved.
Page 110 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
‘Core Project’ Begins at Art Museum 15 Katrina Road • Chelmsford, MA 01824 800-804-0775 64 Cambridge Drive • Monroe, CT 06468 855-281-2211 www.chadwick-baross.com
121 Karner Road • Albany, NY 12212 518-456-1445 • Fax: 518-456-8600 www.contractorssales.com
252 Atlantic City Blvd. • Bayville, NJ 08721 732-361-4487 • Fax: 732-606-0640 322 Spring Valley Road • Old Bridge, NJ 08857 732-591-2088 www.jerseyrents.com
Architectural rendering by Gehry Partners, LLP and KX-L
The Forum, looking west and up to Lenfest Hall. The Forum extends from Level A to Level C and will be one of the most highly trafficked and recognizable areas created during the Core Project. This stunning space will serve as a venue for performances and events, as well as a welcoming spot for visitors to socialize or orient themselves.
454 Route 13 South • P.O. Box 424 • Milford, NH 03055 603-673-2640 • Fax: 603-672-0019 www.chappelltractor.com
MUSEUM from page 8 Gail Harrity, president and COO of the Philadelphia rebuilt, with integrated ramps to provide greater accessibility. Museum of Art, states, “The changes we are now embarking Lenfest Hall will be renovated, and the auditorium will give upon require sensitivity to the unique and defining character 159 North Avenue • Skowhegan, ME 04976 way to create a grand new public space, the Forum, which of the Museum. There are spaces that will receive a light 207-858-0051 • 1-888-875-3954 • Fax: 207-858-0052 will open up circulation to provide visual connections and touch and others that will be bold and transformational in www.heavymachinesinc.com access to several spaces, such as the Vaulted Walkway. The character. Windows that have been long enclosed will now historic North Entrance off Kelly Drive will reopen. Also offer exceptional views of the Philadelphia skyline. Visitors Washington Air included will be a newly designed restaurant, café, meeting will experience a soaring new public space at the heart of the Compressor Rental Co. rooms, and most importantly, additional galleries for building and be able to access it from an entrance that will be 12529 Parklawn Dr. • Rockville, MD 20852 American art and contemporary art. Mr. Gehry and his open to the public once again after nearly half a century. 301-230-5800 • Fax: 301-230-5830 design team respected the building’s original architectural They also will enjoy a new restaurant and café that bear 1800 4th St. NE • Washington, DC 20002 language and materials and applied them to the sections that Frank Gehry’s unmistakable touch and that open out to the 202-635-1500 are being altered or renovated, resulting in a seamless blendThis East Terrace. is about restoring, preserving, and at the 42nd Pl. • Hyattsville, MD 20781 4622 ing of old and new. same time reimagining the building for Philadelphia’s 301-277-1300 Timothy Rub, The George D. Widener director and chief future.” 7304 Grove Rd. • Frederick, MD 21701 officer of the Philadelphia Museum of Art, stated, The Museum opened a new installation of Frank Gehry’s 301-662-7711 executive “The promise of the Museum — what it has come to sym- renderings and architectural model in gallery 154 on the first 44180 Wade Dr. • Chantilly, VA 20152 Philadelphia over the last century — is matched, This will remain on view through late 2018. More 703-742-6200 bolize to floor. www.washair.com indeed exceeded, by the promise it represents in the 21st cen- information, including a short video about the Core Project, tury. Today, we are thrilled to officially break ground on the can be found at www.philamuseum.org/ourfuture. our Facilities Master When it is complet latest phase of Plan. The first results of the Core Project will be seen in 2019, ed in 2020, visitors will see how Frank Gehry’s simple, yet when the renovation and a of the historic North Entrance brilliant, design improves the experience and enhances our major section of the Vaulted Walkway are completed and ability to display more of the collection. This project is com- these areas are reopened. Additional spaces will open 1010 Conshohocken Road • Conshohocken, PA 19428 touches many parts of the Museum, but we are throughout plex and 2019 and 2020, when the Core Project is expect610-279-5777 • Fax: 610-279-7973 committed to remaining open to the public throughout. This ed to be completed. 668 Berlin Cross Keys Road • Sicklerville, NJ 08081 renewal of our 90-year-old building through the Core Project The Museum will continue to assess to the timing to 856-740-1400 • Fax: 856-740-1940 in will enable us to make progress achieving the four goals undertake the implementation of the final phases of the www.norrissales.com laid out in our 2012 strategic plan: to attract new audiences, Facilities Master Plan, which include a new auditorium, enhance the Museum experience, activate the collection, and additional galleries under the East Terrace that will be accesstrengthen our commitment to community. As sible from the Vaulted Walkway and Forum, and further Philadelphians, we are fiscally prudent, and have elected to expanded educational facilities. proceed, with nearly two-thirds of our campaign funding (This story also can be found on Construction now in hand, and the confidence that we can achieve our Equipment Guide’s website at www.constructionequipfundraising objective within the next three years.” mentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 111
Link-Belt® Spin Ace® ([FDYDWRUV DUH SDFNHG ZLWK DOO WKH SRZHU SURGXFWLYLW\ DQG IXHO HI¿FLHQF\ \RX¶YH FRPH WR H[SHFW IURP XV DORQJ ZLWK D PLQLPXP VZLQJ UDGLXV GHVLJQ IRU EHWWHU PDQHXYHUDELOLW\ DW VLWHV ZKHUH ZRUN VSDFH LV DW D SUHPLXP 7KRXJKWIXO UHGHVLJQ RI FRXQWHUZHLJKWV DQG ERRP SODFHPHQW PDNHV WKHP LGHDO IRU UHVLGHQWLDO FRQVWUXFWLRQ XWLOLW\ ZRUN DQG VSHFLDOW\ WUHQFKLQJ MREV 5RRP\ UHGHVLJQHG FDE +LJK GH¿QLWLRQ IXOO FRORU Ǝ /(' PRQLWRU &RQYHQLHQW JURXQG OHYHO VHUYLFH DQG ÀXLG FKHFNV Extended service intervals 7LHU $ FHUWL¿HG ,VX]X HQJLQHV \HDU VXEVFULSWLRQ WR 5HPRWH&$5(™ WHOHPDWLFV $OO WKLV ZLWK WKH LQGXVWU\¶V EHVW VWDQGDUG ZDUUDQW\
Model #
Operating Wt.
Net hp @ rpm
Tail Swing
; 6SLQ $FH
OEV
KS # USP
ƍ Ǝ
; 6SLQ $FH
OEV
KS # USP
ƍ Ǝ
; 6SLQ $FH
OEV
KS # USP
ƍ Ǝ
; 6SLQ $FH
OEV
KS # USP
ƍ Ǝ
<RXU /LQN %HOW ([FDYDWRU GHDOHU KDV WKH ULJKW 6SLQ $FH IRU \RXU DSSOLFDWLRQ DORQJ ZLWK XQFRPSURPLVLQJ VHUYLFH DQG VXSSRUW WR NHHS WKHP SHUIRUPLQJ DW WKHLU EHVW
*75 X3 and 80 X3 engines are Final Tier 4
Page 112 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Liebherr Showcases Numerous U.S.-Premieres for 2017 At Conexpo 2017, Liebherr showcased its machine range for the deep foundation industry: the piling rig LRH 600, the hydraulic free-fall hammer H 15 L, the piling and drilling rig LRB 355 and the duty cycle crawler crane HS 8130 HD. These machines have been especially adapted according to U.S. requirements, and are premiering in North America.
A new LRB 355 piling and drilling rig working in an Austrian village.
Piling Rig LRH 600 The crawler crane model LR 1300 with attached fixed leader system serves as the basic machine for the piling rig LRH 600. In this constellation configuration, the rig enables a diverse range of applications including: piling work with a hammer or vibrator, drilling operations with continuous flight auger or down-the-hole hammer, and A duty cycle crawler crane HS 8130 HD with slurry wall grab.
various soil improvement methods. The leader elements of the LRH 600 allow quick and easy assembly through the pin connections. Stability is ensured by the lattice boom design and through the kicker, secured via supporting tubes at the boom head. The two compensating cylinders ensure that the leader always remains parallel to the upper carriage, and provide the maximum transmission of the torque. Inclination and radius can be adjusted using another pair of cylinders. The LRH 600 achieves an effective working length of 164 ft. (51 m) and a maximum radius of 50 ft. (15 m) with a fixed leader. Inclinations of up to 14 degrees backwards and 9.5 degrees forwards are possible due to the design of the kinematics. The pull force extends to roughly 132 tons (120 t). Free-Fall Hammer H 15 L The hydraulic free-fall hammer H 15 L. currently is the largest
model of three in the new series of working tools, and has a maximum impact energy of 165,952 lb. f-ft. (225 kNm). The key advantages of the attachment include the modular weights, which allow the hammer to be perfectly adapted to the respective piling requirements. The short, lightweight design of the hammer is extremely efficient, as well as user-friendly in terms of transportation and maintenance, according to the manufacturer. At the same time, the pile helmet is soundproof in the standard version. The control is integrated in the system of the Liebherr basic machines. This control allows for better adjustment in accordance with the respective conditions, and thus ensures more efficient operation. The crawler crane LR 1300 or the duty cycle crawler crane HS 895 HD can accommodate the free-fall hammer H 15 L attachment. Since both machines possess a high engine power, the hammer can be operated directly from the on-board hydraulic system, and no additional power pack is required.
Piling and Drilling Rig LRB 355 The LRB 355 has been specially equipped with a larger undercarriage for the U.S. market, which increases the machine’s already high level of stability. Another advantage of the new undercarriage is the minimized transport weight. The jack-up system allows the crawlers to be dismantled, resulting in a transport weight of only 42 tons (38 t) for the basic machine. The machine’s parallel kinematics provide for a large operating area. Since all winches are mounted directly on the leader, this allows for a direct view from the operator’s cab to the main winch, and ensures the ropes do not move during leader adjustment. The optional elevating working platform of the LRB 355 enables safe and easy access to the attachments. Additionally, it facilitates the assembly of tools and maintenance work at the job site. The rig is available in two differsee LIEBHERR page 136
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 113
Harter Equipment, Inc.
A. Montano Company
Tracey Road Equipment
Highway Equipment Company
615 State Route 33 Millstone Twp., NJ 08535 732-446-7600
571 Route 212 Saugerties, NY 12477 845-247-0206
6803 Manlius Center Road • PO Box 489 • East Syracuse, NY 13057 315-437-1471 • 800-872-2390
22035 Perry Highway • Zelienople (Pittsburgh), PA 16063 724-452-7800
www.harterequipment.com
www.amontano.com
Kirkwood, NY 607-775-5010 • 800-3709488 Adams Center, NY
315-788-0200 • 888-3350200
Henrietta, NY 585-334-5120 • 866-950-
www.traceyroad.com
McKean (Erie Area), PA 814-476-7755 Dubois, PA 814-371-3600
1405 Timken Place SW Canton, OH 44706 330-915-8391
www.highway-equipment.com
Page 114 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.
Caterpillar 623G Elevating Scraper, 1:50 Scale - $85
Caterpillar D9T Track-Type Tractor, 1:50 Scale - $120
Caterpillar 963D Track Loader, 1:50 Scale - $75
Caterpillar 950H Wheel Loader, 1:50 Scale - $70
Caterpillar CT660 Yellow Dump Truck, 1:50 Scale - $85
Caterpillar CT660 Red Dump Truck, 1:50 Scale - $85
Caterpillar 308E2 CR SB Mini-Excavator, 1:32 Scale - $85
Caterpillar 335F L Excavator, 1:50 Scale - $95
Caterpillar 336D L Excavator, 1:50 Scale - $100
Caterpillar 374D L Excavator, 1:50 Scale - $110
Caterpillar 568 GF Road Builder w/bucket thumb, 1:50 Scale - $125
Caterpillar D8R,Series II Track-Type Tractor, 1:50 Scale - $85
Caterpillar D6T XW VPAT Track-Type Tractor w/AccuGrade GPS, 1:50 Scale - $90
Caterpillar 320D L Excavator, 1:50 Scale - $85
Caterpillar 680 Yellow 6x4 Tractor w/Rogers Trailer, 1:50 Scale - $200
Caterpillar D4,1953 Tractor w/4S Bulldozer, 1:16 Scale - $190
Shipping and Handling Included
CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034
WE PURCHASE COLLECTIONS!!!
Contact – Barry McKeon
800-523-2200
Ext. 197
• 610-506-5961 Cell
Email – bmckeon@cegltd.com
Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 115
Deacon Equipment Co. CALL: 888-233-2266 Located In: Bloomsburg, PA
NEW MORBARK 3800XL Track Wood Hog...CALL
:KHUH :RXOG <<R RX *ULQG"
Used Morbark 4600 Wood Hog; Cat 525 Diesel...CALL Exclusive Morbark Dealer
Visit: www.deaconequipment.com
Peterson custom mers operate their mach hines in the most demandingg work sites in the world d! When you are this far out, you need to know that you have the most reliable, toughest est machine possible.
Manitou Americas Teams With Yanmar Manitou Americas Inc. has partnered with Yanmar to offer remanufactured (REMAN) engines under the XPRT Genuine Parts brand name. Remanufactured engines are specifically designed to fit any Gehl or Mustang branded machines operating in North America. Yanmar Americas remanufactures engines in the United States, to the strictest of standards, using XPRT Genuine Parts. Lead-times are less than 15 days on most engines (versus 120 days with new engines), and carry a one-year OEM factory warranty, backed by the Gehl and Mustang dealer network. “We are launching this offer, in partnership with Yanmar Americas, as another example of our efforts to reduce the total cost of ownership [TCO] for our end-customers,” said David Harrison, director of after sales, Manitou Americas Inc. “Remanufactured engines are more cost-effective than new engines and offer significantly reduced lead-times, saving customers time and money, exhibiting our confidence that these engines will meet or exceed our customers’ expectations in terms of quality and reliability.” The remanufactured engines are currently stocked at the Manitou Americas Inc. distribution center in Belvidere, Ill., and can be purchased through any Gehl or Mustang dealer within North America. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Barry Equipment Covering New England & Eastern NY (508) 949-0005
Just one look at a Peterson can show you ou why we build the most innovative nnovative grinders in the he market. For thirty years, Peterson’s terson’s attention to detail tail and drive to build the highest hest quality, highest volume vollume producing machines make a Peterson a sure investment. Want to see whaat a Peterson Horizontal Grinder can do? Give us a caall at 800.269.6520 or visit us at www.petersoncorp.com.
Cleveland Brothers Covering Pennsylvania & West Virginia (814) 237-5132 ext. 5101
Groff Tractor New Jersey, LLC Covering Southern New Jersey (877) 874-2624 www.grofftractor.com
Scan this QR code with your smartphone to learn more about Peterson (you caan download a free reader from youur phone's app store).
800-269-6520 800 269 6520 • www.petersoncorp.com www..petersoncorp.com • PO BOX X 40490 • Eugene, OR 974044
Page 116 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Malfunctioning Swing Span Spurs New Drawbridge By Brenda Ruggiero CEG CORRESPONDENT
The Massachusetts Bay Transportation Authority (MBTA) is heading a project that includes replacing a drawbridge swing span superstructure. The Beverly Drawbridge carries the Rockport and Newburyport Commuter Rail Line over the Danvers River in Beverly, Mass., which is located in Essex County. In the past four years, there have reportedly been numerous service delays caused by malfunctions of the swing span, which was built in 1885 and is now more than 130 years old. The swing span project began on March 15, 2016, and is scheduled for completion by Dec. 23, 2017. The full dollar amount is $16.1 million. The contract calls for the replacement of Beverly Drawbridge swing span superstructure with a new mechanical and electrical system. According to Lisa Battiston of MDTA communications, the main challenges with the project involve the 28-day shutdown of rail service for Contract 2 and the navigational channel for the removal and replacement of swing spans, as well as the coordination of the work to be completed within the 28-day shutdown of Contract 2. “The Swing Span Superstructure will be fabricated in Alabama and will be floated out on a barge to Beverly for replacement,” Battiston said. G & G Steel is fabricating the swing span. Battiston noted that a Gantry System will be used to remove and replace the swing span superstructure. “The existing swing span structure was
jacked to determine the dead load weight,” she said. HNTB Corporation was selected as the engineering firm responsible for the design of the overall project. As part of the rehabilitation/replacement of the Beverly Drawbridge, the approach spans are planned to be rehabilitated consisting of concrete pile repairs. Also, full replacement of the steel superstructure swing span is to occur, including full replacement of mechanical components which include the hydraulic rail system, bridge wedges and swing span motor and mechanisms. The full project scope has been split into two contracts, with the first contract to include approach span rehabilitation and the second to include the swing span superstructure/mechanical component replaceAs part of the rehabilitation/replacement of the Beverly Drawbridge, the approach spans are planned to be rehabilitated consisting of concrete pile repairs.
Work is continuing with concrete pile repair work within the navigational channel and north and south abutment repairs.
The Massachusetts Bay Transportation Authority (MBTA) is heading a project that includes replacing a drawbridge swing span superstructure.
ment. The contractor for Contract 1 is Middlesex Corp., and notice to proceed was given on Aug, 5, 2015. Final completion is set for Feb., 28, 2018. Work is continuing with concrete pile repair work within the navigational channel and north and south abutment repairs. Contract 2 was awarded to JF White Contracting. This contract continues with various work activities on the bridge in preparation of removal of the existing swing span and the float-in of new swing span and testing. This work will require a 28-day shutdown of rail service along the Newburyport/Rockport Commuter Rail Lines proposed for July 10, 2017 through Aug. 6, 2017, with regular train service on
Aug. 7, 2017. The new swing span will be supported by the existing pivot pier, and other improvements in the area will include a new electrical room and generator and a remodeled control house. According to J.F. White’s website, work will consist of the complete replacement of the existing steel swing span with a new steel swing span for the two mainline railroad tracks, along with modifications to the existing center pivot pier to accommodate the new swing span superstructure. In addition, the contractor will replace the bridge’s mechanical, electrical, bridge control and railroad signal components/systems. Also required, will be a partial demolition of the existing pivot pier deck and existing access stairway, along with construction of a new steel support platform on the pivot pier to support the new electric room. Modifications to the existing bridge tender’s control house will include a new control panel and architectural, electrical and railroad signal upgrades. Marine work will involve the installation of new submersed conduits between the control house and the center pivot pier, as well as the removal of the existing swing span and installation of the new swing span. Finally, miscellaneous repairs and replacements to the existing navigation channel timber fender systems and navigation lighting system will take place. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 117
THE W.I. CLARK COMPANY www.wiclark.com 30 Barnes Industrial Park Rd Wallingford, CT 06810 203/265-6781 Danbury, CT 06810 203/775-1203 Plainfield, CT 06374 860/546-4808 Plainfield, CT 06374 860/546-4808 SCHMIDT EQUIPMENT INC. www.schmidtequipment.com 80 Southbridge Rd. North Oxford, MA 01537 508/987-8786 Billerica, MA 01862 978/667-4345
Plymouth, MA 02363 508/830-9997 No. Swansea, MA 02777 508/379-9810 Springfield, MA 01104 413/543-5595
JESCO www.jesco.us 118 St. Nicholas Ave. South Plainfield, NJ 07080 908/753-8080 800/241-7070 Fairfield, NJ 07004 973/227-2221 800/321-8080
Lumberton, NJ 08048 609/267-2020 888/217-0600 Beacon, NY 12508 845/831-1800 800/724-0725 Deer Park, NY 11729 844/482-0910
ELLIOTT & FRANTZ, INC. ELLIOTT & FRANTZ, INC. www.elliottfrantz.com 6680 Allentown Blvd. 12051 Tac Court Harrisburg, PA 17112 Manassas, VA 20109 717/652-5430 703/257-2381 10421 Guilford Road Jessup, MD 20794 301/725-7394
450 E. Church Road King of Prussia, PA 19406 610/279-5200
38420 Sussex Highway Delmar, DE 19940 302/846-3033
RUDD EQUIPMENT COMPANY www.ruddequipment.com 4344 Poplar Level RD Louisville, KY 40213 502/456-4050 Pittsburgh, PA 412/741-1731 Clearfield, PA 814/765-8500 Charleston, WV 304/755-7788
NORTRAX www.nortrax.com 1505 Caribou Road New Canada, ME 04743 207/834-6701 34 Page Road West Hermon, ME 04401 207/947-6786 106 North Street Houlton, ME 04730 207/532-6517 396 County Road Westbrook, ME 04092 207/773-3777 98 Sheep Davis Road Pembroke, NH 03275 603/225-2769
14 The Crossing Boulevard Clifton Park, NY 12065 518/371-5111
From the moment you first experience the efficiency, reliability and durability of a Hitachi excavator, you too will become Hitachi To The Core. These machines can help take productivity to the next level and boost your bottom line. So operators can do what they say.
1486 US Highway 11 Gouverneur, NY 13642 315/287-0703 300 Clinton Street Springfield, VT 05156 802/885-6840 375 Engineers Drive Williston, VT 05495 802/658-2121
HitachiConstruction.com
Page 118 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
www.jescoditchwitch.us 118 St Nicholas Ave. • South Plainfield, NJ 07080 908-753-8080 • FAX 908-753-7853 Shrewsbury, MA 508-719-0200 Middletown, DE 302-376-0784 Beacon, NY 845-831-1800
Deer Park, NY 844-482-0910 Fairfield, NJ 973-227-2221 Lumberton, NJ 800-241-7070
Economic Development Commission Announces New Casino During the regular meeting of the East Windsor Economic Development Commission held recently, the Commission announced that the MMCT chose East Windsor for the new Connecticut Casino. The EDC is looking forward to working with the new Casino Group to make this opportunity a success and to help other businesses in town benefit from the growth. “The announcement of East Windsor, Conn., as a location for a third casino, illustrates we are open for business” stated Eric Moffett, EDC chair. “MMCT chose East Windsor for all the right Reasons”. Moffett added that direct highway access, local work force, and development policies all make East Windsor a great place for development. Following a smart development strategy set forth by the town, the EDC continues to see success. In recent years, a new 200,000 sq. ft. (18,580 sq m) retail store opened; the industrial park has seen new tenants come to town; and many local businesses have expanded. With new commuter rail services being developed between New Haven and Springfield, Mass., East Windsor is situated less than a quarter mile from one of new commuter stations and will bring transportation oriented development programs to the town. The expected new infrastructure from MMCT and plan of development created by the town, is likely to Multi One more businesses to East Windsor. Articulated Loaders bring But with this success and business opportunities, the In Stock EDC still continues to foster a strategy to keep the rural part of East Windsor, rural. The EDC recognizes quality NEW IHI Excavators of life is a main component to a successful town, and the Vibrotech Screens EDC will work to keep the farms and local charm as part of the foundation of East Windsor. It’s the development 215/679-5958 of business in the right areas that will maintain and supJD Equipment port our rural areas and the residents of East Windsor. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipwww.jdequip.com mentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 119
Opportunity is knocking— —save on Kubota’s versatile KX Series utility excavators today!
$
0 Down, 0% Financing for 60 Months
*
A.P.R.
Offfer ends 6/30/17..
Abele Tractor & Equipment Co., Inc. www.abeletractor.com
Albany, NY 12205 518/438-4444 Cherry Valley Tractor www.cherryvalleytractor.com
Marlton, NJ 08053 856/983-0111
ADMAR Construction Equipment & Supplies www.admarsupply.com
Vestal, NY 13850 607/798-0333 Tonawanda, NY 14217 716/873-8000 Canandaigua, NY 14424 585/396-0031
Rochester, NY 14623 585/272-9390 Cicero, NY 13039 315/433-5000
Eagle Power & Equipment Company www.EaglePE.com
Farm-Rite Inc.
Harter Equipment, Inc
Westchester Tractor Inc.
www.farm-rite.com
www.harterequipment.com
www.wtractor.com
www.ableequipment.com
Brewster, NY 10509 845/278-7766 Fax: 845/278-4431
Deer Park, NY 11729 866/468-2666 631/841-3333
Shiloh, NJ 08353 Millstone Twp, NJ 08535 Eagle, PA 19480 800/752-6373 • 856/451-1368 732/446-7600 610/458-7054 1-888-HARTER-1 Calverton, NY 11933 631/284-3127 Erb & Henry Equip., Inc. Marshall Machinery, Inc. www.erbhenry.com www.marshall-machinery.com F&W Equipment www.fwequip.com New Berlinville, PA 19545 Honesdale, PA 18431 610/367-2169 570/729-7117 Orange, CT 06477 203/795-0591
ABLE Equipment Rental
Chappell Tractor Sales www.chappelltractor.com
454 Route 13 South P.O. Box 424 Milford, NH 03055 603/673-2640 Fax: 603/672-0019
*$0 down, 0% A.P A P.R. financing for up to 60 months on purchases chases of new Kubota KX Series equipment iss aavailable to qualified purchasers from m participating dealers’ in-stock inventory thrrough 6/30/2017. Example: A 60-month monthly installment repayment term at 0% A.P.R. requires 60 payments of $16.67 per $1,000 000 financed. 0% A.PP.R. .R. interest is available to customers if no dealer documentation preparation fee is charged. Dealer charge foor document preparation fee shall be in accordance rdance with state sta laws. Inclusion of inelligible equipment may result in a higher blended ded A.P.R. 0% A.P.R. and low-rate financing ma may not be available with customer instannt rebate offers. Financing is available through gh Kubota Credit Corpora Corporation, U.S.A., 1000 Kubota K Drive, Grapevine, TX 76051; subjectt to credit approval. Some exceptions apply. Offer O expires 6/30/2017. See us for details oon these and other low-rate options or go too www.kubota.com for more information. Opttional equipment may be shown.
kubota.com k
© Kubota Trractor tor Corporation, Corpora 2017
Page 120 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
DOT: Weekly Commute Savings From Toll Booth Removal Drivers into Boston from its western suburbs are now saving 12 minutes of commute time each way, or two hours a week, after the Massachusetts Department of Transportation removed all middle-lane toll booths last fall to let traffic flow without stopping, said state Transportation Secretary Stephanie Pollack. She told AASHTO’s Transportation TV that the changes resulted from a simultaneous set of 23 work-zone projects in the month before Thanksgiving along the Massachusetts Turnpike on Interstate 90. Contractors’ crews first routed all traffic in those zones through outer toll booth lanes while workers removed the center lanes’ toll booth infrastructure and repaired the road bed. Then they opened all the middle lanes to two-way, free-flowing traffic where the booths had been. That was in conjunction with a Mass Pike change to all electronic tolling, through overhead sensors that read in-car transponders or snap pictures to send bills to drivers who do not have the transponders. Once crews, through round-the-clock initial efforts, established the unbroken traffic flow within a short time, they could work more gradually to remove remaining toll
Drivers into Boston from its western suburbs are now saving 12 minutes of commute time each way, or two hours a week, after the Massachusetts Department of Transportation removed all middle-lane toll booths.
booths and related buildings by the end of this year. In designing the nearly $133 million set of projects, Pollack said MassDOT looked at three benefits to come from removing the stop-start pattern for toll collections at booths — improved travel time, safety and
environmental effects. “If you look at the data there are more accidents that occur immediately before and after toll booths,” she said. “There’s a huge safety benefit in eliminating the booths,” she added. And, Pollack said, “if you create these
multi-mile backups at your toll booths, those cars are burning too much gas and emitting too much air pollution.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
PC Construction Receives One of AGC’s Highest Honors PC Construction has received after tropical storm Irene, the damone of the Associated General age at the Waterbury State Office Contractors of America’s highest Complex was massive and the honors — an Alliant Build redevelopment was a complex, America Award in the construcmulti-step process that required tion management renovation catededication, ingenuity and collabogory — for its work to rebuild the ration across government and in Waterbury State Office Complex. conjunction with Vermont busiPC Construction leaders and nesses, like PC Construction,” members of the project’s consaid Vermont Gov. Phil Scott. struction team accepted the award “Congratulations PC at AGC’s 98th Annual Construction; this award is wellConvention in Las Vegas. This is deserved. We are forever grateful the third Alliant Build America to you and so many others who Award PC Construction has stepped up and answered the call received. to serve our state in the wake of “It is an incredible honor to devastation across our region.” accept this national award on PC Construction’s work at the behalf of the 1,200 hard-working Waterbury State Office Complex employee-owners at PC PC Construction has received one of the Associated General Contractors of America’s highest honors was recognized in 2016 by Construction and so many others — an Alliant Build America Award in the construction management renovation category — for its work Engineering News-Record (ENR) who partnered with us to rebuild to rebuild the Waterbury State Office Complex. with a Merit Award in the New the Waterbury State Office England region and by Associated Complex following Tropical General Contractors of Vermont state roads were damaged or washed away. with a Best Builders Award. Storm Irene,” said Kevin McCarthy, PC flood.” When Tropical Storm Irene hit Vermont Among the areas hardest hit was Waterbury, Construction president and CEO. “This was For more information, visit truly a team effort that included state offi- in late-August 2011, it caused millions of Vt., where 1,500 state workers were dis- www.pcconstruction.com. cials, design partner Freeman French dollars in damage to roads, bridges, build- placed at the Waterbury State Office (This story also can be found on Freeman and many subcontractors coming ings and land. More than 3,500 homes and Complex when flooding damaged buildings. Construction Equipment Guide’s website at “As was the case in many parts of the state www.constructionequipmentguide.com.) together in the aftermath of a devastating businesses were impacted and 500 miles of
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 121
CONNECTICUT
MAINE
NEW JERSEY
NEW YORK
NEW YORK
The W.I. Clark Company
Nortrax
Jesco, Inc.
Five Star Equipment, Inc.
Nortrax
118 St. Nicholas Ave. South Plainfield, NJ 07080 908/753-8080 800/241-7070 Fax: 908/753-7853 1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080 Fax: 973/575-5553 1790 Route 38 Lumberton, NJ 08048 609/267-2020 888/217-0600 Fax: 609/261-8559 www.jesco.us
Rochester, NY 14624 585/235-3011 Kirkwood, NY 13795 607/775-2006 Orchard Park, NY 14127 716/662-2191 6500 E Taft Road Syracuse, NY 13057 315/452-4560
Clifton Park, NY 518-371-5111 Gouverneur, NY 315-287-0703
Wallingford, CT 06492 203/265-6781 Danbury, CT 06810 203/775-1203 Plainfield, CT 06374 860/546-4808 www.wiclark.com
DELAWARE Jesco, Inc. Middletown, DE 302/376-0784
MARYLAND Jesco, Inc. Baltimore, MD 410/687-1700 Delmar, MD 410/546-1090 Frederick, MD 301/874-5500 White Plains, MD 301/870-1438
Hermon, ME 207-947-6786 Houlton, ME 207-532-6517 New Canada, ME 207-834-6701 Westbrook, ME 207-773-3777
MASSACHUSETTS Schmidt Equipment, Inc. North Oxford, MA 01537 508/987-8786 North Billerica, MA 01862 978/667-4345 Plymouth, MA 02363 508/830-9997 No. Swansea, MA 02777 508/379-9810 Springfield, MA 01104 413/543-5595 www.schmidtequipment.com
Jesco, Inc. 497 Fishkill Avenue Beacon, NY 12508 845/831-1800 800/724-0725 Fax: 908/821-1671 110 East Jefryn Blvd. Deer Park, NY 11729 844-482-0910
NEW HAMPSHIRE Nortrax Pembroke, NH 603-225-2769
VERMONT Nortrax Springfield, VT 802-885-6840 Williston, VT 802-658-2121 www.nortrax.com
PENNSYLVANIA Five Star Equipment, Inc. 711 Route 199 Athens, PA 18810 570/882-8800 1300 East Dunham Drive Dunmore, PA 18512 570/346-1701 46 Route 97 Waterford, PA 16441 814/796-2663 2585 Lycoming Creek Road Williamsport, PA 17701 570/494-4030 www.fivestarequipment.com
Plasterer Equipment Co., Inc. 2550 E. Cumberland St. Lebanon, PA 717/273-2616 800/225-4001 3215 State Rd. Sellersville, PA 215/258-5700 800/523-2209 400 Stoke Park Rd. Bethlehem, PA 610/867-4657 800/587-9790 640 Lowther Rd. Lewisberry, PA 717/938-6568 866/787-0001 www.plasterer.com
Page 122 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Terramac Appoints C.N. Wood as New Authorized Dealer Terramac, a manufacturer of representatives will deliver rubber track crawler carriers, timely service and their parts expands its representation in and service technicians are the North American market to equipped with modern techinclude C.N. Wood as part of nology to ensure machines are its dealer network. C.N. Wood maintained at the highest stanwill represent the Terramac dard, according to the compaproduct line in Massachusetts ny. and Rhode Island. “We choose to align our“C.N. Wood is a long standselves with top line manufacing dealership with an experiturers that offer value in their enced team, who’s dedicated products and help our custo providing their customers tomers solve problems in spewith the best possible equipcific applications,” said Jim ment, service and support,” Maxwell, general manager of said Matt Slater, director of C.N. Wood. “Terramac does sales of Terramac. “C.N. just that. We look forward to Wood is a welcomed and making our customers more valuable addition to our dealer competitive in their business network.” with Terramac’s versatile C.N. Wood will offer C.N. Wood will offer Terramac’s RT9, RT14 and RT14R crawler carriers to serve a wide range of industries crawler carriers.” Terramac’s RT9, RT14 and including general construction, environmental and agriculture. In addition to Terramac’s three standard For more information on RT14R crawler carriers to options — convertible dump-to-flat beds (RT9), rock dump beds (RT9, RT14 and RT14R) and flatbeds (RT9 C.N. Wood, visit www.CNserve a wide range of indus- and RT14) — C.N. Wood will offer Terramac units customized with support attachments such as cranes, Wood.com. tries including general con- personnel carriers, water tanks and hydroseeders. For more information struction, environmental and on Terramac, call The team at C.N. Wood will provide 630/365-4800 or visit www.terramac.com. agriculture. In addition to Terramac’s three — C.N. Wood will offer Terramac units cusstandard options — convertible dump-to-flat tomized with support attachments such as professional sales, rental and aftermarket (This story also can be found on beds (RT9), rock dump beds (RT9, RT14 cranes, personnel carriers, water tanks and support on the Terramac product line Construction Equipment Guide’s website at across four branch locations. C.N. Wood’s www.constructionequipmentguide.com.) and RT14R) and flatbeds (RT9 and RT14) hydroseeders.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 123
EAST PBE, INC. 283 Pane Road Newington, CT 06111 860/665-7470 Fax: 860/665-7478
PINE BUSH EQUIPMENT INC. www.pbeinc.com Pine Bush Office 97 Rt. 302 P.O. Box 106 Pine Bush, NY 12566 845/744-2006 Fax 845/744-2900 Holmes Office www.pbeinc.com 24 Sybil Court Holmes, NY 12531 845/878-4004 Fax 845/878-9626
EDWARD EHRBAR INC. www.ehrbar.com 4 Executive Plaza Yonkers, NY 914/738-5100 Fax: 914/738-6847 601 Coates Ave. Holbrook, NY 11741 631/563-7600 Fax: 631/218-1069 42 Kenosia Ave. Danbury, CT 203/743-0088
MIDLANTIC MACHINERY INC. 2240 Bethlehem Pike Hatfield, PA 19440 215/822-0145 Harrisburg, PA 717/652-3190 Wilkes-Barre, PA 570/824-9891 Baltimore, MD 410/247-2100
Frackville, PA 570/874-6140 28587 Sussex Highway Laurel, DE 19956 302/715-5382
PENN-JERSEY PENN-JERSEY 847 State Route 12 Frenchtown, NJ 08825 908/824-4200 1330 Hurfville Rd. Deptford, NJ 08096 856/227-6400
Page 124 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
‘Project Journey’ Includes Two Phases of Construction JOURNEY from page 102
passenger comfort and amenities for a better travel experience,” said Jerome L. Davis, Airports Authority executive vice president and chief revenue officer. “Building a new concourse and relocating security checkpoints will open new opportunities for the Airports Authority to make passenger-focused improvements throughout the existing and new terminal space — transforming Reagan National into the best airport it can be.” To prepare for Project Journey construction, the Airports Authority’s headquarters staff will relocate from airport grounds to Crystal City in April. The mailing address and telephone contacts for the Metropolitan Washington Airports Authority will remain the same, with few exceptions. The current headquarters building, located on the site of the future commuter concourse, will be demolished as part of the project. The April 2017 Airports Authority board meeting will be held at Dulles International while headquarters functions are transitioned into the new facility. Beginning in May, board meetings will take place in the 5th floor conference room in the new corporate office located at 2733 Crystal Drive in Arlington, Va. For more information on Project Journey, visit www.flyreagan.com/projectjourney. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Exterior view of new security checkpoint (1 of 2) to be constructed above arrivals level roadway and connected to National Hall
Ransome Provides Customers With Solutions for Any Job
The low overhead height wouldn’t allow a normal excavator to have sufficient clearance to carry the bag in and place it in the shallow water. RANSOME from page 34
the companies.” Wickberg Marine has been in business for 30 years, and specializes in hydraulic and mechanical dredging. Ransome has been in the business for more than 50 years, first spending many years working at the family Caterpillar
Earlier in the year, Wickberg Marine had purchased some pontoons from Ransome to modify a John Deere 240 into an amphibious excavator with a 60-ft. (18 m)-long reach.
dealership. He started his own company, Ransome Equipment Sales, in 1994, and then later formed Long Reach High Reach. “I use the combination of my past experience and my many contacts throughout the country and throughout the world to tackle the specialty job applications,” Ransome
said. For more information, call 888/988-5747 or visit ransome-equip.com and longreachhighreach.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 125
MIDLANTIC MACHINERY
EDWARD EHRBAR
www.ehrbar.com www.midlanticmachinery.com 2240 Bethlehem Pike Hatfield, PA 19440 215/822-0145 Harrisburg, PA 717/652-3190 Baltimore, MD 410/247-2100 Wilkes-Barre, PA 570/824-9891 Frackville, PA 570/874-6140 Laurel, DE 302/715-5382
ANDERSON EQUIPMENT CO.
www.andersonequip.com PENNSYLVANIA Pittsburgh, PA 412/343-2300 Clarion, PA 814/226-4100 Clearfield, PA 814/765-5311 Somerset, PA 814/443-2867 Cambridge Springs, PA 814/398-8819 NEW YORK Buffalo, NY 716/877-1992 Henrietta, NY 585/334-6770 Syracuse, NY 315/463-8673 Albany, NY 518/785-4500 Watertown, NY 315/788-5512 Endicott, NY 607/748-3400 Olean, NY 716/372-8822 NEW HAMPSHIRE Lancaster, NH 603/788-6595 Manchester, NH 603/627-7696 MAINE Bangor, ME 207/942-0177 Gorham, ME 207/591-5482 Farmington, ME 207/778-6595
4 Executive Plaza Yonkers, NY 10701 914/738-5100 Holbrook, NY 631/563-7600 New York City, NY 718/626-3331 42 Kenosia Ave. Danbury, CT 203/743-0088
C.N. WOOD CO, INC.
www.cn-wood.com Avon, MA 508/584-8484 Woburn, MA 781/935-1919 Whately, MA 413/665-7009 Johnston, RI 401/942-9191
PINE BUSH EQUIPMENT, CO. INC.
www.pbeinc.com Route 302, P.O. Box 106 Pine Bush, NY 12566 845/744-2006 Holmes, NY 12531 845/878-4004
EAST PBE, INC.
www.pbeinc.com 283 Pane Road Newington, CT 06111 860/665-7470 Fax: 860/665-7478
KOMATSU NORTHEAST
www.komatsune.com VERMONT East Montpelier, VT 802/223-9689
2820 Hamilton Blvd. South Plainfield, NJ 07080 908/561-9000 201 North Route 73. Winslow Township, NJ 08095 856/767-5900
Page 126 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Manitowoc Sells Five New Truck Cranes at ConExpo 2017 STEPHENSON from page 14
A new hydraulically removable counterweight system, 80-degree max boom angle and a 20-degree tilting operators cab — a first for National Crane — further add to its operator-centric design. The NTC55 takes boom trucks to the “next level,” according to Ned Eisenhart, president of Iron Stag Crane. “It takes the so-called boom truck as we know it and takes it to the next level and really puts it in a truck crane level because of all the features, capacity and the roadability,” he said. “It has a tilt cab and some features that larger machines will have that weren’t in a boom truck. That’s one feature of the many features that we like with the crane. And that was a big push for that crane, because our boom truck, our 45s, the outrigger stance was so wide and we were wanting something that had a smaller outrigger stance that could compete with 40-ton truck cranes. With this, we got that ability that we can bring in the outriggers that are a shorter width and still have a 40ton capacity.” On the Road The NTC55 also has extreme road-ability, according to Nichols.
According to Larry Allison, president of Allison Crane & Rigging of Williamsport, Pa., the NTC55 fills a gap the company had: rather than sending in the big truck cranes, it can send the small boom truck.
“It has a very nice ride profile and it is very easy to get to a job, even if it is far away. This expands a lot of reach and it allows me to chase my customer who continues to be more mobile. As my customers go farther, I go farther,” he said
Ben Daugherty (L) and Steve Tucci (R), both of Stephenson Equipment, congratulate Larry Allison of Allison Crane & Rigging for the purchase of the National NTC55 truck crane.
Perfect Partners Nichols credits Stephenson Equipment for contributing to his business’s success and said he’d been requesting a smaller truck. “Stephenson has always been in my court,” he said. “They are really the reason that I am as successful as I am. They have been a tremendous partner in taking me forward. Now they are a tremendous partner of National and National has helped deliver a product that we both have been asking for. It took a little bit of doing, because you don’t move those big companies that quickly, but they delivered a product that is exactly
what I asked for.” Allison, a fourth-generation Stephenson Equipment customer, spoke of a long-standing relationship and said, “they [Stephenson] have always been a great partner, and to me that’s what sets them aside from others: their working relationship.” Eisenhart also lauded Stephenson Equipment. “We have been in family business for many years back previous to Eisenhart Crane,” he said. “Back in the ’60s, we bought cranes from Stephenson. I always had a good relationship with them and now that we started this business, we decided that they would be the company that we would we want to go into partnership with and be the ones to serve our crane needs.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 127
Page 128 • April 19, 2017 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide
Call me toda ayyy,, I’ll be glad to help hellp you! ~ Jason
» The #1 Sellin ng Rubber TTrrack Brrand an nd In America! »
800-365-72 260 » depparts.com m
REPLACE EMENT UNDERCARRIA A GE Morooka,® Bobcat,® Gehl,® Mustang,® TTak akeuchi,® ® CAT 279, 289 2 & 299
Ashland, VA VA » Jacksonville, FL » Dallas, D TX » Cincinnati, OH » Portland,OR » Sacram mento, CA » Schenectady y,, NY » Leduc, AB
PUMP REBUILDS 1985! e c n i S
NEW, USED & REMAN PARTS • • • • • • • •
Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!
ALL MAKES & MODELS OF MACHINES SAVE UP TO 60%
• Full-Service Hydraulic Repair • Turnkey Hydraulic Systems • Hydraulic System Integration • Professional Field Service • Full Machine Shop • Hard Chrome Plating • Large Seal Inventory
86 million Americans Maybe even you, have prediabetes.
Call Ken or Marc 716/681-8474 Fax: 716/681-8514 4474 Walden Avenue Lancaster, NY 14086 sales@fluidpowerservice.com
ONE YEAR WARRANTY
person-thinking ‘but-probably-not-me’
CYLINDER REPAIR EXCHANGE
www.fluidpowerservice.com
www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com
Next Issue Closes Friday April 24th
No one is excused from prediabetes. It’s real, but it can be reversed. Know where you stand at , or talk to your doctor today.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 129
The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $120 • Color $180
Excavator, Backhoe & Loader Buckets, New & used, over 500 in stock, also Grapples, Thumbs & other attachments
C&S Equipment Co. 609/267-0782
7-8 AP
MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make & model. Call McLaren 888-492-4230 8-9 DH
2012 Hudson HTD20B, 15 ton tilt, 24’ deck, 8’ dovetail pintel hook, 2” oak boards, new 17 ply tires, oil bath dexter axles ............................................................................ Asking $11,000
Contact Bob Kempa 540-589-4346 7-8 AP
NEW AND SURPLUS STRUCT. STEEL JUMBO BEAMS, PIPE, ROAD PLATE Joseph Fazzio Inc.com • 856-881-3185 N.J. 8-9 TM
BUCKETSBOX: BEDDING BOXES DUMP HOPPERS SKID STEER ATTACHMENTS
EXCAVATOR, MINI EXCAVATOR & BACKHOE BUCKETS ALL FULLY DRESSED W/ PINS & SIDE CUTTERS
Joseph Fazzio Inc.com • 856-881-3185
7-8 TM
PLATES: STEEL PLATES 96” X 240” & LARGER ALL THICKNESSES - PREMIUM GRADE A570-50 ALSO - LARGE STEEL ANGLES
JFISTEEL.COM • 856-881-3185
7-8 TM
MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. Call McLaren 888-492-4230 8-9 DH
MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air SemiPneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 8-9 DH Call McLaren 888-492-4230
“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 37 states ............................................................ Call
2000 Johnson and Ross portable concrete plant. Manual panel, batch computer, 12 yard scale and 53 ton cement storage. Only 20000 yards of concrete have been run through this plant.
2000 Kawasaki 2.5 yard payloader, Only 30000 hours have been clocked on this machine.
Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 614-395-4064 7-8 EB
Please call 516-775-7471 for pricing 7-8 AP and additional information
Please call 516-775-7471 for pricing 7-8 AP and additional information
Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us
7-8 TM
Diesel & Gas / LP Exhaust Scrubbers
2014 Terex TSV70 Skid Steer Loader, Vertical Path, 74hp, 2-Speed, Hyd-Quick-Tach 129” Hinge........ $36,600 7-8 EB Call Tania 614-443-9751 x237
Hartl Bucket Crusher (HBC 650) For Rent. Call KCC Excavation LLC for Pricing. Screening Bucket Available 978-658-3929 • pcherin@kccexcavationllc.com 8-9 TM
Milling Material, Large supply of nice clean milling material, no dirt, no chunks, any amount. Call 215-630-4782 • Langhorne, PA 19053 8-11 AP
Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine(one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $120 per ad, $60 additional for color. Additional $20 to place online • Your ad will run for two consecutive issues in 1 region.
Lowboy Trailer Pin On Flip Axles, In Stock, 275/Tires, Aluminum Wheels 610/534-0700 John at Stephenson Equipment 7-8 TM
Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Northeast States. For more information, call Construction Equipment Guide today at
800/523-2200
800.233.6539
Foley Engines 8-9 AP
SEE YOUR BARGAIN AD IN COLOR. ONLY $60 EXTRA FOR TWO INSERTIONS
Page 130 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CLASSIFIEDS ASPHALT EQUIPMENT
EXCAVATORS
PAVING EQUIPMENT
‘12 Wacker Neuson 9503, 10 Ton wheel excavator w/ bucket Wain Roy, Very good condition, 1,650 hrs.................... $86,000.
T-450; T650; GEHL: 1649; 1648; BLAW KNOX: PF180H; PF200; PF500; LEE BOY: 8500, 7000; 5000, 1000; NEAL GOLF CART PAVER; SALSCO; ROSCO DISTRIBUTOR; SEALING TANK; 510 GRADER; BOMAG RECLAIMER; HYSTER 10 TON; MILLER PAVER. Call 413-537-1892
CRANE INSPECTIONS ALL TYPES OF CRANES INSPECTED AND CERTIFIED
Able Tool & Equipment abletool.net 860-289-2020
PARTS
TRAILERS 2015 Felling Trailers, GN 22’+5 X 102’’ Deck over, New.. ....................................$13,675.
FLAT RATE INSPECTIONS
Tower
All Types, Any Model Cranes
Overhead Prep Classes with Written Exam
OSHA Inspected and Certified
Hands On Training with Practical Exams
Certified OSHA and ANSI Full-Time Inspectors
One-Hour Practice with Practical Exams Signal Person
Easy & Safe to Apply with One Page Credit Application. 100% Financing - No Down Payment. Winter Skip Payment Plans. Fixed Monthly Payments. New & Used Equipment. Better Than Bank Rates! Have a question? Need Help? Call Bob Hoffman 484-548-5004
Call 215-639-2579 Atlantic Crane Inspection Services Visit us atwww.atlanticcrane.com
TRUCKS
TRAINING
Mobile Swing Cab, Fixed Cab, Lattice Truck & Crawler
Rigger I & II Re-Certifications 4 training locations in PA or at your location All instructors are NCCCO Certified Call Chris 717-558-7248 Stephenson Equipment Visit our website: www.stephensonequipment.com
®
Mobile Tower Self Erecting Tower Overhead Articulated Knuckleboom Service Truck Rigger 1 & 2 Signal Person
All trainers NCCCO Certified
NCCCO Crane Operator Training
* Equipment Financing*
NCCCO Crane Operator Training
Tyler Equipment 860-356-0840
Call 215-639-2579 Atlantic Crane Inspection Services Visit us at www.atlanticcrane.com
EQUIPMENT FINANCING
215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200
Trained at our location in PA or NJ or your location.
Toppers & Trailers PLUS 507-387-7376
Call 800-325-6455 Stephenson Equipment Visit our website: www.stephensonequipment.com
PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034
Grouser Steel Tracks, S/N 220085, 28’’ Steel Track Pads w/ Hardware................ $2,500.
Accredited by the US Dept. of Labor Under 29CFR Part 1919 and Accredited by CALOSHA
Dielectric Testing
Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion.
2013 Doosan DA30 Articulated Dump Truck, Tailgate, Excellent condition, 2,000 hours.............. ..................................$250,000. 2013 Doosan DA Articulated Dump Truck, Tailgate, iT4, Excell........................ $215,000. Gibson Machinery, LLC 440-439-4000
DO YOU HAVE A FEW PIECES OF HEAVY EQUIPMENT TO SELL?
$40
ONLY
Construction Equipment Guide is THE Place to List It!
2 INSERTIONS IN ONE REGION (Northeast, Southeast, Midwest, West) 30 words or less - $1.20 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database.
Call 800-523-2200 or go online to place your ad: You must have a classified print ad to do so.
www.constructionequipmentguide.com/pages/customer/classifieds.asp and place your ad through our website and we will contact you!
Subscribe to CEG today... Get an edge on your competition! Construction Equipment Guide Northeast Edition subscribers are the best informed about construction news, construction equipment, sales, auctions, equipment prices, trends and changes in the industry and activities of its people. Call Toll Free! We now accept Visa, Mastercard & American Express!
SUBSCRIPTIONS:
One Year $65
(within United States & Puerto Rico Only)
CARDMEMBER’S NAME _________________________________________________________ COMPANY NAME _______________________________________________________________ STREET____________________________________ PHONE NO. ________________________ CITY ______________________________________STATE _______ ZIP ________________
Next Issue Closes Friday April 24th
Check Enclosed
VISA
MASTERCARD
American Express
CARD NUMBER
EXP. DATE (Mo./Yr.) SIGNATURE OF AUTHORIZED CARDHOLDER
TOLL FREE ®
1-800/523-2200 FAX 215/885-2910
470 Maryland Dr. • Ft. Washington, PA 19034 Email: circulation@cegltd.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 131
Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items
If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: LOOKING FOR LATE MODEL BACKHOE ASAP IN TEXAS I'M LOOKING FOR 2000-2010 COMPLETE BACKHOE ASAP! PLEASE AUCTION PRICES ONLY. I'M A DEALER SO NO RETAIL, I'M LOOKING TO PURCHASE IN QTY IF THE PRICE IS RIGHT. LOOKING FOR UNITS IN THE TEXAS AREA IF POSSIBLE. I HAVE CASH TODAY!! NOTE: CAN BE IN WORKING OR NON WORKING CONDITION. CONTACT: MATTHEW (PH: 346-230-4485) EMAIL: SALES.AMERICANPUMPANGEAR@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 615 DIFF LOCK ASSEMBLY 615 PART #9V1761 FOR EVERYTHING, BOLTS TO SIDE OF CARRIER, RING PINION SHAPE DOES NOT MATTER CONTACT: DONNIE CHENEY (PH: 229-881-0751) EMAIL: DONNIECHENEY@YAHOO.COM FAX: 229-849-2191 –––––––––––––––––––––––––––––––– WANTED: HITACHI EX200 AND EX400 WANTED TO BUY HITACHI EX200, EX200-1, EX270, EX400 AND EX400-1. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESARA (PH: 832-528-0786) EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 2817270415 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 140G, 140H RUNNING OR NON-RUNNING!!!!!! WANTED TO BUY CAT MOTOR GRADER 140G AND 140H. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: STEVE (PH: 713-659-0593) EMAIL: STEVE@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: RUNNING OR NON RUNNING MACHINES!!!! CAT WHEEL LOADER 936, 950, 950B, 950E, 950F, 966D, 966E, 966F AND 966G. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: SAM (PH: 713-855-6170) EMAIL: SALES@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: 2002-2005 VERMEER HG 365 GRINDER PARTS UNIT I AM LOOKING FOR A 2002-2005 VERMEER HG 365 GRINDER UNIT FOR PARTS ONLY. I HAVE A COUPLE OF UNITS I'M LOOKING TO PUT TOGETHER. I'M A SERIOUS BUYER AND LOOKING TO ACT FAST. DOESN'T MATTER WHAT'S WRONG, DON'T CARE ABOUT THE HOURS. CONTACT: JAMES (PH: 346-230-4485) EMAIL: SALES.AMERICANPUMPANGEAR@GMAIL.COM FAX: 346-230-4485 ––––––––––––––––––––––––––––––––
WANTED: INTERNATIONAL 260A BACKHOE ANY CONDITION CONTACT: RUDY (PH: 732-921-1314) EMAIL: CRUTILITIES@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: GP 7.5 CUBIC YARD BUCKET FOR CAT 980G/H/K WE ARE LOOKING FOR CAT 980G/H/K 7.5 CUBIC YARD GP BUCKET WITH BOE (BUCKET ONLY). OTHER MAKES OF THE SAME SIZE BUCKET ARE ACCEPTABLE. WE APPRECIATE AND THANK YOU FOR YOUR RESPONSE. CONTACT: ROY FOLLICK (PH: 519-686-1123) EMAIL: SALES@MARCELEQUIPMENT.COM –––––––––––––––––––––––––––––––– WANTED: HYDRAULIC PUMP FOR 2700 Q LINK BELT CONTACT: TONY STEFFES PH: 414-651-7336 EMAIL: STEFFESANTHONY@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: LINKBELT CRANES LINKBELT MODEL 48A OR LS68, LS78, LS 98, OR LS108. OPERATING OR PARTS MACHINES CONTACT: WILLIAM TAYLOR PH: 609-868-0326 EMAIL: TAYLORSCRANESERVICE@GMAIL.COM FAX: 856-468-5742 –––––––––––––––––––––––––––––––– WANTED: FORD BACKHOE 455C I AM LOOKING FOR A TECHNICIAN FAMILIAR WITH THE ENTIRE ELECTRICAL SYSTEM OF A FORD BACKHOE 455C. THE MACHINE IS LOCATED IN CONSHOHOCKEN, 19428 CONTACT: JON NEVE PH: 610-828-9869 EMAIL: JAMESJNEVEINC@GMAIL.COM FAX: 610-828-0382 –––––––––––––––––––––––––––––––– WANTED: WE BUY EQUIPMENT MANUALS WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS, BUT NOT INCLUDING TRUCKS AND VEHICLES. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION, IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL US. CONTACT: GRACE FRANCES PH: 270-849-2270 EMAIL: TRITOWN1@MSN.COM ––––––––––––––––––––––––––––––––
WANTED: HORIZONTAL DIRECTIONAL DRILLS I AM CURRENTLY LOOKING TO PURCHASE HDD UNITS ASAP! ANYWHERE IN THE U.S. CAN BE WORKING OR BROKEN. MUST HAVE LOW MILES AND RODS AND BASKET MUST BE IN PLACE. I WILL PAY FOR SHIPPING. MUST HAVE FULL SPECS AND PHOTOS READY. CONTACT: MATTHEW STEVENSON PH: 346-230-4485 EMAIL: MATT.TURBOWELDINGSVC@GMAIL.CO M FAX: 346-230-4485 –––––––––––––––––––––––––––––––– WANTED: DRESSER TD 20 G W/EROPS DOZER WITH NO MORE THAN 5000 HRS. SEMI-I BLADE PREFERRED. CONTACT: RANDY MYERS PH: 785-948-2231 EMAIL: RANTAW@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: BUCKETS FOR 322/325 CAT EXCAVATORS EXCAVATOR BUCKETS CAT 322/325 WITH 80MM PINS CONTACT: KEN PH: 330-219-1003 EMAIL: KRV8815@MSN.COM –––––––––––––––––––––––––––––––– WANTED: ATTACHMENTS INTERNATIONAL WANTED TO BUY ATTACHMENTS INTERNATIONAL SEVERE SERVICE DEMOLITION GRAPPLES FOR 46-62,000 WEIGHT EXCAVATOR. WOULD CONSIDER LABOUNTY. PHOTO AND PRICE PLEASE. CONTACT: AMIE PH: 218-863-6444 EMAIL: AMIE@ATTACHMENTSINTL.COM –––––––––––––––––––––––––––––––– WANTED: LARGE SAND OR MASS EXCAVATING BUCKETS WANTED TO BUY LARGE SAND OR MASS EXCAVATING BUCKETS. PREFER ATTACHMENTS INTERNATIONAL OR EMPIRE. MUST BE REBUILDABLE. PHOTO AND PRICE PLEASE. CONTACT: SHANA PH: 218-863-6445 EMAIL: SHANA@ATTACHMENTSINTL.COM –––––––––––––––––––––––––––––––– WANTED: EQUIPMENT MANUALS BUYING NEW OR USED CONSTRUCTION AND AGRICULTURE SERVICE, PARTS AND OPERATOR MANUALS. EQUIPMENT DEALERS & PRIVATE COMPANIES, IF YOU HAVE MANUALS JUST SITTING ON THE SHELF AND YOU NO LONGER NEED THEM, PLEASE GIVE ME A CALL OR EMAIL. I BUY LARGE AND SMALL LOTS. JOHN DEERE CAT, KOMATSU, CASE, NEW HOLLAND, VOLVO, DOOSAN AND SO ON. CONTACT: JOHN WHITNEY PH: 530-864-0771 EMAIL: WHITNEYJ65@YAHOO.COM FAX: 530-864-0771 ––––––––––––––––––––––––––––––––
WANTED: YANMAR MODEL 55R YANMAR MODEL 55R TRACK CARRIER/DUMP -LOOKING FOR A MACHINE FOR PARTS -CAN BE BURNT OR WRECKED. CONTACT: TIM LEWANDOWSKI (PH: 724-640-4396) EMAIL: LEWEQUIP.BRANDON@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: LATE MODEL TANDEM AXLE MACK DUMP CONTACT: CHRIS MCPHILLIPS (PH: 610-8647529) EMAIL: MCPHILLIPSCJ@AOL.COM FAX: 610-7893076 –––––––––––––––––––––––––––––––– WANTED: AT 422 GROVE CRANE TRANSMISSION CONVERTER AND TRANSMISSION CASE (COMPLETE WITH ALL GEARS) FOR A 1989 GROVE AT-422 CRANE. SERIAL #69502, MODEL 4425 G CONTACT: JAMES ARNETT JR (PH: 937-277-8080) EMAIL: JARNETTJR@ORBITSDO.COM FAX: 937-277-3951 –––––––––––––––––––––––––––––––– WANTED: USED SWINGER 200/220 REAR AXLE USED SWINGER 200/220 REAR AXLE. DANA MODEL 60 OR 70 TRAC LOCK AXLE CONTACT: GERRY (PH: 218-863-6445) EMAIL: ATTINTL@LORETEL.NET –––––––––––––––––––––––––––––––– WANTED: JCB ROPS/FOPS CONTACT: ROBT. EMAIL: DEN_AYE@YAHOO.COM FAX: 215-757-3665 –––––––––––––––––––––––––––––––– WANTED: BOBCAT 863 LOOKING FOR A LOW HOURS MACHINE, HYD STABILIZER A PLUS. CONTACT: WILLIAM TEETERS PH: 715-563-7162 EMAIL: BILLT_54726@YAHOO.COM FAX: 715-563-7162 ––––––––––––––––––––––––––––––––
WANTED: TRIAXLE ROAD TRACTOR DAY CAB TRIAXLE ROAD TRACTOR FOR HEAVY HAUL 240-250INCH WHEELBASE DOUBLE FRAME 500PLUS HP 18 SPEED DAY CAB 20K PUSHER NEWER NO RUST CONTACT: JOE PH: 724-944-5569 EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– WANTED: 785 SKID STEER LOADER, NEW HOLLAND STOLEN FROM HARLAN MIDDLEBROOKS IN 2013 IN FLINTSTONE, GA. SERIAL NO. 820904. 1992 YR. HAD CLAM BUCKET ON IT. REWARD FOR INFORMATION. MAY BE IN TN, GA, OR KY. PLEASE HELP. THANK YOU. CONTACT: PAUL MIDDLEBROOKS PH: 423-580-5078 EMAIL: PAULMIDDLEBROOKS@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: RADIATOR FOR A LINKBELT 40 TON CRANE NEEDED, RADIATOR FOR A 1980 40 TON LINKBELT RT CRANE. MODEL # HSP8040 CONTACT: JAMES ARNETT JR (PH: 937-277-8080) EMAIL: JARNETTJR@ORBITSDO.COM FAX: 937-277-3951 –––––––––––––––––––––––––––––––– WANTED: TWIN 44 WASH PLANT, SAND LOOKING TO BUY USED TWIN 44 WASH PLANT FOR SAND. PLEASE EMAIL ME PICTURES, DETAILS, PRICE AND LOCATION. CONTACT: MICHAEL BUHLER PH: 814-637-5599 EMAIL: NORTHSTARAGG@ WINDSTREAM.NET FAX: 814-637-5598 –––––––––––––––––––––––––––––––– WANTED: CATERPILAR MOTOR GRADER 140G LOOKING FOR USED CONSTRUCTION EQUIPMENT IF YOU HAVE ANY OF THESE IN YOUR INVENTORY PLEASE CONTACT ME THROUGH EMAIL OR MY PERSONAL CELL NUMBER. BELOW IS MY REQUIRED MACHINERY LIST. WHEEL LOADER (CATERPILLAR), ROLLERS (DYNAPAC), MOTOR GRADERS (CATERPILLAR), EXCAVATORS (HITACHI). MODEL1. 930 2. 950B 3. 950E 4. 966F 5. 966F(II) 1. CA301 2. CA251 3. CA262 4. CA602 5. CA362 CONTACT: ILYAS KHAN PH: +923322489350 EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CASE 1150C DOZER 34X6 PYRAMID SHOES NEED 2 SOME CALL THEM ATEX SHOES. CONTACT: DAVID RESTER PH: 901-490-8888 EMAIL: HIGHFLYR@BELLSOUTH.NET FAX: 731-635-3366 ––––––––––––––––––––––––––––––––
WANTED: JOHN DEERE EXCAVATOR & LOADER I HAVE AN IMMEDIATE NEED FOR AN EXCAVATOR AND POSSIBLY A LOADER IF THE PACKAGE IS PRICED RIGHT. PLEASE ONLY OFFER MACHINES THAT FIT REQUIREMENTS. COULD BE ANY OF THESE MODELS ZERO TAIL OR TRADITIONAL WITH THE FOLLOWING OPTIONS: DEERE 225D OR 245G, 240D OR 250G, 270D OR 290G. UNDER 3500 HRS, LONG STICK, HYD THUMB, HYD COUPLER, BEST PRICE. DEERE 644K OR 724K. UNDER 4000 HRS, HYD COUPLER, RIDE CONTROL, BEST PRICE. PERFER WESTERN OR MIDWEST US FREIGHT LOCATION. CONTACT: CALEB COLBORN PH: 208-757-3564 EMAIL: CALEB@DOUBLEEDGE EQUIPMENT.COM FAX: 208-403-0363 –––––––––––––––––––––––––––––––– WANTED: KOMATSU EXCAVATOR PC300-5 & PC300-6 WANTED TO BUY KOMATSU EXCAVATOR PC300-6 CONTACT: ABDAL PH: 415-687-0337 EMAIL: HAJICONSTRUCTEST@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CAT 950B AND 950E I AM LOOKING FOR 950 B AND 950E CONTACT: ALI PH: 206-802-5306 EMAIL: PIGL_PK@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: USED 12G MOTOR GRADER WITH RIPPER WANTED TO BUY CAT 12G. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: SAM PH: 713-855-6170 EMAIL: SALES@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: GRAPPLE TELEX TXC340 2 INTO 3 TINE GENERAL PURPOSE GRAPPLE FOR TEREX TXC340 CONTACT: BRYAN WICKSON PH: 603-548-2037 EMAIL: BTWICKSON@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CAT E70B PART LOOKING FOR COMPLETE DOOR FOR CAT E70B EXCAVATOR CONTACT: BRIAN PH: 715-216-0138 EMAIL: BRIANBOLDER48@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: JD 350B TRANS PTO SHAFT WANTED JOHN DEERE 350B DOZER TRANS PTO SHAFT TO MOUNT JD3315 WINCH. PART NO. T21346 CONTACT: ROGER PH: 570-639-3058 EMAIL: ROGERPF1@FRONTIERNET.NET ––––––––––––––––––––––––––––––––
Page 132 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944
RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631
• Glenville, WV April 20 - 21, 2017 For: Complete Liquidation Retirement Auction
• Pasco, WA April 19, 2017
• Aguascalientes, Mexico Fri., April 21, 2017 For: Late Model Earth Moving Equipment & more • Rochester (Dansville), NY Sat., April 22, 2017 For: Large Municipal Construction Equipment • Dover, OH Thurs., April 27, 2017 For: Large Municipal Construction Equipment • Cumberland, ME Fri., April 28, 2017 For: Late Model Construction Equipment & more • Racine, WI Sat., April 29, 2017 For: Rentals! Late Model Construction Equipment • Williston, ND Tues., May 2, 2017 For: Bankruptcy. Late Model Construction Equipment • Auburn, ME Fri., May 5, 2017 For: Late Model Construction Equipment & more • Burlington, VT Sat., May 6, 2017 For: Late Model Construction Equipment & more • Scott City, MO Thurs., May 11, 2017 For: Liquidation Concrete Products & more • Grand Rapids, MN Fri., May 12, 2017 For: Construction & Aggregate Equipment & more • Providence, RI Sat., May 13, 2017 For: Rental Fleet Midi Construction Equipment & more • Dallas, TX Tues., May 16, 2017 For: Rentals! Construction Equipment & more • San Angelo, TX Thurs., May 18, 2017 For: Late Model Rental Returns • Syracuse, NY Sat., May 20, 2017 For: Complete Liquidation Construction Equipment • Canastota, NY Sun., May 21, 2017 For: Annual Landscape/Lawn & Garden Equipment • Kissimmee, FL Mon., May 22, 2017 ForLate Model Rental Fleet Construction Equipment & more • Long Island, NY Sat., May 27, 2017 For: Rental Fleet Auction • Richmond, VA Wed., May 31, 2017 For: Liquidation. Crane, Construction Equipment & more • Buffalo, NY Sat., June 3, 2017 For: Job Completion, Construction Equipment & more • Lexington, KY Wed., June 7, 2017 For: Liquidation. Crane, Construction Equipment & more • Parkersburg, WV Sat., June 10, 2017 For: Classic Cars • Las Vegas, NV Sat., June 17, 2017 For: Very Large Rental Fleet Auction • Atlantic City, NJ Sat., June 24, 2017 For: Very Late Model Rental Returns
• Houston, TX April 19 - 20, 2017
Coming Auctions
• Minot, ND April 20, 2017 • North Franklin, CT April 28, 2017 • Prince George, BC, CAN May 2, 2017 • Klamath Falls, OR May 4, 2017 • Hillsville, VA May 4, 2017 • Grand Junction, CO May 10, 2017 • Toronto, ON, CAN May 10 – 11, 2017 • Lincoln, NE May 11, 2017 • Bozeman, MT May 12, 2017 • St. John’s, NL, CAN May 16, 2017 AARON POSNIK AUCTIONEERS www.posnik.com 413-733-5238 • Norwich, CT Thurs., May 4, 2017 For: Construction Equipment BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Portland, OR Fri., April 28, 2017 For: Monthly Public Auction • Sacramento, CA Sat., May 13, 2017 For: Monthly Public Auction • Portland, OR Fri., May 26, 2017 For: Monthly Public Auction • Sacramento, CA Sat, June 10, 2017 For: Monthly Public Auction • Riverside, CA Sat, June 17, 2017 For: Monthly Public Auction • Portland, OR Fri., June 30, 2017 For: Monthly Public Auction BEAZLEY AUCTIONEERS www.beazleyauction.com 800-670-1227 • Dallas (Anna), TX Fri., April 28, 2017 For: Construction Equipment • Midland, TX Fri., May 19, 2017 For: Construction Equipment • Dallas (Anna), TX Fri., June 9, 2017 For: Construction Equipment BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE ONLY Thurs., April 20, 2017 • ONLINE ONLY Thurs., April 27, 2017 • ONLINE ONLY Thurs., May 4, 2017 • ONLINE ONLY Thurs., May 11, 2017 • ONLINE ONLY Thurs., May 18, 2017 • ONLINE ONLY Thurs., May 25, 2017
• Sebring, FL Sat., September 9, 2017 For: Construction & Agricultural • Sebring, FL Sat., November 11, 2017 For: Construction & Agricultural J.J. KANE AUCTIONEERS www.jjkane.com 856-764-7163
BIG IRON AUCTIONS www.bigiron.com 800-937-3558
FREY & SONS, INC. www.freyandsons.com 419-455-3739
• Kansas City, MO Thurs., April 20, 2017 For: Construction Equipment
• ONLINE ONLY April 19, 2017
• Angola, IN Sat., April 22, 2017 For: Lawn & Rental Equipment Clearance Auction
• Plymouth Meeting, PA Sat., April 22, 2017 For: Construction Equipment
• Archbold, OH Fri., April 28, 2017 For: 2017 Spring Equipment Auction
• Villa Rica, GA Thurs., April 27, 2017 For: Construction Equipment
• ONLINE ONLY April 26, 2017 • ONLINE ONLY May 3, 2017 • ONLINE ONLY May 10, 2017 • ONLINE ONLY May 31, 2017 BLACKMON AUCTIONS, INC. www.blackmonauctions.com 501-664-4526 • Little Rock, AR April 18 - 20, 2017 For: 3 Day Contractor’s Auction BUNCH BROTHERS AUCTIONEERS www.bunchbrothers.com 270-376-2992 • Louisville, KY April 25 - 26, 2017 For: 2 Day Spring Auction COMMOMWEALTH OF PA www.auctionsbygov.com 866-469-7383 • Harrisburg, PA Tues., June 6, 2017 For: Spring Heavy Equipment Auction DARELL DUNKLE & ASSOCIATES AUCTIONEERS INC. www.dunkleauctioneers.com 800-433-6670
HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., April 21, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., June 16, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., August 18, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., October 20, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., December 8, 2017 For: Truck, Trailer & Equipment HOUSBY AUCTIONS www.housby.com 866-218-6266 • ONLINE ONLY April 26, 2017 • ONLINE ONLY May 10, 2017 • ONLINE ONLY May 31, 2017 • ONLINE ONLY June 14, 2017
• Harrison, MI Thurs., May 18, 2017 For: Annual Spring Contractors Auction
• ONLINE ONLY June 28, 2017
DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087
• ONLINE ONLY July 26, 2017
• ONLINE ONLY July 12, 2017
• Prospect, CT Sat., April 22, 2017 For: Construction Equipment
HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898
• Prospect, CT Sat., June 24, 2017 For: Construction Equipment
• Flemington, NJ Wed., May 3, 2017 For: Complete Liquidation Barbiche Brothers Construction
DEANCO AUCTIONS www.deancoauction.com MS: 601-656-9768
I.R.A.Y. AUCTION www.iraymn.com 320-968-7230
• Philadelphia, MS May 24 - 25, 2017 For: Huge 2-Day Public Auction
• Foley, MN Fri., June 9, 2017 For: Heavy Equipment, Truck & Trailer Auction
• Philadelphia, MS July 19 - 20, 2017 For: Huge 2-Day Public Auction
• Foley, MN Fri., September 8, 2017 For: Heavy Equipment, Truck & Trailer Auction
• Philadelphia, MS September 12 - 13, 2017 For: Huge 2-Day Public Auction
• Foley, MN Fri., December 1, 2017 For: Heavy Equipment, Truck & Trailer Auction
AL: 334-693-2540
• Philadelphia, MS November 15 - 16, 2017 For: Huge 2-Day Public Auction DUNN DEAL AUCTION CO. www.dunndealauctions.net 614-946-6853 • Stoutsville, OH Sat., May 6, 2017 For: Spring Columbus Heavy Equipment & Truck Auction
INSIGHT AUCTIONEERS www.insightauction.com 863-386-1225 • Sebring, FL Sat., May 13, 2017 For: Construction & Agricultural • Sebring, FL Sat., July 15, 2017 For: Construction & Agricultural
• Rome, NY Sat., May 6, 2017 For: Construction Equipment JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • ONLINE ONLY April 10 - 19, 2017 For: Multi State Absolute Truck & Trailer Auction • Brooklyn, MS May 5 - 6, 2017 For: Late Spring Public Auction JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800 • Carrollton, GA Wed., April 26, 2017 For: Contractors Auction • ONLINE ONLY April 27 – May 5, 2017 For: New CAT Parts Auction MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888 • Pelzer, SC Thurs., June 22, 2017 For: Summer Contractors Auction McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811 • Seven Valleys, PA Tues., May 9, 2017 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., June 13, 2017 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., July 11, 2017 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., August 8, 2017 For: Tractor, Farm & Construction Equipment MOTLEYS ASSET DISPOSITION GROUP www.motleys.com 1-877-MOTLEYS • Richmond, VA Tues., April 25, 2017 For: Construction Equipment & Trucks NITKE AUCTIONS www.nitkeauctions.com 715-693-4447 • Wausau, WI April 28 - 29, 2017 For: 52nd Annual Wisconsin Contractors Auction
PETROWSKY AUCTIONEERS A Ritchie Bros. Company www.petrowskyauctioneers.com 860-642-4200 • North Franklin, CT Fri., April 28, 2017 For: Unreserved Public Equipment Auction PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Thurs., April 20, 2017 For: Truck & Trailer Auction • ONLINE ONLY Tues., April 25, 2017 For: Tri-State Bobcat Auction • ONLINE ONLY Thurs., April 27, 2017 For: Construction Equipment • ONLINE ONLY Thurs., May 4, 2017 For: Truck & Trailer Auction • ONLINE ONLY Thurs., May 11, 2017 For: Construction Equipment RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Lebanon, TN Sat., June 10, 2017 For: Construction Equipment • ONLINE ONLY Sat., July 15, 2017 For: Construction Equipment • Lebanon, TN Sat., September 9, 2017 For: Construction Equipment RTI AUCTIONS www.teitsworth.com 585-243-1563 • Palmyra, NY Sat., May 13, 2017 For: Palmyra Municipal Auction SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • Windsor Locks, CT Sat., May 6, 2017 For: Public Equipment Auction SHETRON AUCTIONS www.shetronequipment.com 717-532-8828 • Shippensburg, PA Fri., April 28, 2017 For: Construction & Farm Equipment Auction • Spring Grove, PA Fri., May 5, 2017 For: Farm Equipment Auction • Rockaway, NJ Fri., May 19, 2017 For: Crane Auction WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat., June 10, 2017 For: Construction Equipment, Truck & Trailers • Princeton, MN Sat., September 16, 2017 For: Construction Equipment, Truck & Trailers • Princeton, MN Sat., December 9, 2017 For: Construction Equipment, Truck & Trailers YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Ashland, OH Thurs., April 27, 2017 For: Heavy Equipment
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 133
EY National Award...
IronPlanet’s Owens Is EY Entrepreneur Regional Semifinalist EY announced that Gregory J. Owens, IronPlanet chairman and CEO, is a semifinalist for the EY Entrepreneur Of The Year 2017 Northern California Region Award. Now celebrating its 31st year, the awards program recognizes entrepreneurs in more than 145 cities and 60 countries who demonstrate excellence and extraordinary success in such areas as innovation, financial performance and personal commitment to their businesses and communities. Owens was selected as a semifinalist by a panel of independent judges. Finalists will be announced May 15, and winners will be announced at a black-tie Awards Gala on June 23, with more
“I am honored to make the short list for EY Entrepreneur Of The Year.”
27
AUCTION CALENDAR
follow
us on
@Lyo nAuc tion!
1.-2. Thursday, April 20 & Friday, April 21: GLENVILLE, WEST VIR- 15. Thursday, May 18: SAN ANGELO, TEXAS: Late Model Rental GINIA: 2-Day Complete Liquidation Retirement Auction. Over 50 Successful Return Auction. Construction Equipment, Aerials, Telescopic Forklifts, Years in Business. One of the Best Oil & Gas & Construction Companies in the Attachments, Support Equipment. United States. Very Late Model Vintage Equipment and Trucks & Trailers. 16. Saturday, May 20: SYRACUSE, NEW YORK: Complete Liquidation EARLY HILITES: 2016 Truck Tractors, Dump Trucks, 2014-2011 Cat D8T's, Construction Equipment, Trucks, Trailers, Support and Complete Shop. Cat JD 850K, 2015 Vibratory Rollers, Drill Rigs. IT'S BIG. One of the Finest Sales Crawler Tractors, Cat Rubber Tired Loaders, Quantity of Terex S24 of ALL TIME. Motorscrapers, Rollers, Motor Graders. 3. Friday, April 21: AGUASCALIENTES, MEXICO: Late Model Cat, 17. Sunday, May 21: CANASTOTA (Syracuse), NEW YORK: Annual Komatsu, Case, Dynapac Earthmoving Equipment, Forklifts, Aerial Lifts, Landscape & Lawn & Garden, Lawn Mowers, Midi & Mini Construction Attachments, Trucks & Trailers...Plus More!! Equipment, Skid Steers, Attachments, Support Equipment. 4. Saturday, April 22: ROCHESTER (DANSVILLE), NEW YORK: 18. Monday, May 22: KISSIMMEE, FLORIDA: Late Model Rental Fleet Large Municipal Construction Equipment, Dump Truck, Truck Tractor Auction. Construction Equipment, Aerials, Support, Attachments, Trucks & Trailers. HILITES: 2016 JD 644K, JD 624K, Cat 930K, Cat 930M, (2)Cat 926M, (2) Cat 19. Saturday, May 27: LONG ISLAND, NEW YORK: Rental Fleet 924K, (2)Cat 906M, (10)2016 Cat Skid Steers. Auction. Late Model Cat, Komatsu Construction Equipment, Forklifts, Truck 5. Thursday, April 27: DOVER, OHIO: Late Model Construction Tractors, Dump Trucks, Trailers, Very Large Quantity Support & Attachments. Equipment, Aerial Lifts, Forklifts, Skid Steers, Attachments, Trucks & Trailers, Cat, Bobcat, Komatsu, Terex and More. 6.
Friday, April 28: CUMBERLAND, MAINE: (30+)Truck Tractors(2006-2009), Late Model Construction Equipment, Cat, John Deere, Komatsu, Dump Trucks, Equipment Trailers, Support.
7.
Saturday, April 29: RACINE, WISCONSIN: Rentals, Rentals, Rentals. Late Model Rental Fleet Construction Equipment, Hydraulic Excavators, Telescopic Forklifts, Tractor Loader Backhoes, Rubber Tired Loaders, Crawler Tractors, Attachments, Truck Tractors, Dump Trucks, Equipment Trailers, All Types of Trailers, PLUS Support Equipment.
8.
NEW DATE: Tuesday, May 2: WILLISTON, NORTH DAKOTA: Bankruptcy Auction. Day 2 of 2-Day Bankruptcy. Late Model Cat Construction Equipment, All Types of Trucks, Attachments, Support Equipment.
IronPlanet
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
315.633.2944
www.lyonauction.com www.lyonauctionlive.com
Gregory J. Owens
than 700 founders, CEOs and other business leaders in attendance, at the Beverly Hilton hotel in Beverly Hills, Calif. “By harnessing vast data analytics and spearheading unique technology advancements we have been able to grow an ambitious initial promise into an online platform that brings ever greater efficiency to the heavy equipment industry worldwide,” said Gregory J. Owens, IronPlanet chairman and CEO. “I am honored to make the short list for EY Entrepreneur Of The Year.” A pioneer in technology innovation and supply chain management, Owens is responsible for the development, refinement and execution of IronPlanet’s overall business strategy. In addition to a prior role as managing director at Red Zone Capital, Owens also served as chairman and chief executive officer of Manugistics Group Inc., an international leader in resource planning and supply chain management software. Regional award winners are eligible for consideration for the EY Entrepreneur Of The Year National Awards. Award winners in several national categories, as well as the overall national award winner, will be announced at the EY Entrepreneur Of The Year National Awards gala in Palm Springs, Calif., on Nov. 18, 2017. The awards gala is the culminating event of the EY Strategic Growth Forum. For more information, visit www.ey.com/us/eoy/norcal.
Important Auctions
9.
20.
Wednesday, May 31: RICHMOND, VIRGINIA: PHASE II Complete Liquidation-R.R. Dawson Bridge Company, LLC. EARLY HILITES: (20)Cranes: 2003 Linkbelt LS248H(200T), Linkbelt LS248H(165T), Linkbelt LS 218H Series-II(110-ton), (2)Linkbelt 218H(100T), Linkbelt HSP8050(50T), Grove RT755(50T), Grove 655(35T), Linkbelt HC138(75T), Linkbelt HC138A(75T), Pile Driving Equipment, Hydraulic Power Packs, Truck Tractors, Pickups, Dump Trucks, Fuel & Lube Trucks, Boom Trucks, Flatbed Trucks, All types of Cat Construction Equipment, Hydraulic Excavators, Rubber Tired Loaders, Crawler Tractors, Rollers, Boom Lifts, Forklifts, Detachable Equipment Trailers(60 & 50T). SPECIAL: (3)Bidwell Concrete Machines, 2014 Terex Bidwell 4800 Roller Paver, SPECIAL: (21)Shugart Barges(majority re-done, very nice), 25ft. Work Boat, Enormous Amount of Support Includes Efco Forms, Crane Mats, Sheet Piling, Rigging, Beams, Concrete Buckets.
Friday, May 5: AUBURN, MAINE: Late & Great Model Cat, John Deere, Komatsu Earthmoving Equipment, Trucks, Trailers, Attachments & 21. Saturday, June 3: BUFFALO, NEW YORK: Job Completion. Large Support. HILITES: (2)2016 Cat 305E, (3)2013 305E, (3)Witzco 50-ton Construction (Cat, Komatsu, John Deere, Daewoo) Aggregate Equipment, Detachables(tri), Cat 926M. Truck & Trailer, Attachments, Support Equipment Auction. 10. Saturday, May 6: BURLINGTON, VERMONT: Late Model Cat, John 22. Wednesday, June 7: LEXINGTON, KENTUCKY: PHASE III Deere, Komatsu Construction Equipment, Dump Trucks, Truck Tractors, Complete Liquidation-R.R. Dawson Bridge Company, LLC. HILITES: Pickups, Attachments, Support Equipment. Cranes, Construction Equipment, Vehicles. Enormous Amount of All Types of 11. Thursday, May 11: SCOTT CITY, MISSOURI: Complete LiquidationSupport Bridge Contracting Equipment. Rose Concrete Products, Inc/Semco Ready Mix, Inc. Concrete Equipment, 23. Saturday, June 10: PARKERSBURG. WEST VIRGINIA: Very Concrete Manufacturing, Various Concrete Molds, Concrete Accessories, Large, Over 150 Classic Cars from Several Privately Held Collections. Construction Equipment, Cranes, Forklifts, Accessories, Redi Mix Trucks, 24. Saturday, June 17: LAS VEGAS, NEVADA: Very Large Rental Fleet Pickups, Support Equipment. Auction. HILITES: Large Quantity of Boom & Scissor Lifts, All Types of 12. Friday, May 12: GRAND RAPIDS, MINNESOTA: Secured Party Forklifts, Welders, Generators, Light Plants, Trucks, Trailers, Attachments & Auction, Cat, Komatsu Construction & Aggregate Equipment, Attachments, Support Equipment. Support, Trucks & Trailers. HILITES: (8) Cat 740B, Cat 400E, Cat 345DL, Saturday, June 24: ATLANTIC CITY, NEW JERSEY: Very Late (3)Cat 336EL, Cat M318D, Cat 980K, Komatsu WA 500, Komatsu D61PX- 25. Model Rental Returns of Cat, Komatsu, Doosan, Bobcat Earthmoving 15, Cat Telescopics, (10)Bobcats and Much More. Equipment, Cranes, Aerial Lifts, Forklifts, Attachments, Support Equipment, 13. Saturday, May 13: PROVIDENCE, RHODE ISLAND: Late Model Dump Trucks, Truck Tractors, Dump Trailers, Tagalongs. Automobiles, Booms, Bucket Trucks, SUV's Pickups from Frontier Communications and Rental Fleet Midi Construction Equipment, Hydraulic 26. DTBA: BOSTON, MASSACHUSETTS: Large Complete Liquidation, Excavators, Skid Steers, Loaders, Air Compressors, Welders, New Support Late Model Construction Equipment, (25)Truck Tractors, Trailers, Equipment. Attachments, Support Equipment. 14.
Tuesday, May 16: DALLAS (FT. WORTH), TEXAS: RENTALS, 27. DTBA: HARTFORD, CONNECTICUT: Large Quantity Bucket RENTALS, RENTALS. Construction Equipment, Forklifts, Aerials, Trailers, Trucks, Service & Pickups, Dump Trucks, Rubber Tired Loaders, Skid Steers, Attachments. HILITES: (4)Kobelco SK210LC, (30)Hydraulic Excavators, Backhoes, Air Compressors, Light Plants, Welders, Attachments, Large (20+) Skid Steers, (15)Light Plants. Quantity New Support & Tools.
www.lyonauction.com
Page 134 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
I-81 Plan Ensures Minimal Disturbance to C&O Canal PLAN from page 100
Maryland’s responsibility for management and maintenance. West Virginia previously completed the widening of I-81 to three lanes in each direction, from Martinsburg to just north of the U.S. 11 interchange in West Virginia. In order to provide the third lane widening into Maryland, West Virginia requested Maryland to include continuous widening of I-81 into project from the current point north of their U.S. 11 Interchange to the Maryland State line. This additional widening will be included in the project with West Virginia reimbursing Maryland for the additional costs. The resulting project will provide for a third lane in each direction from north of the MD 63/68 interchange, southward to Martinsburg, W.Va. SHA noted that, initially, all work will be done under the Potomac River bridge so there will not be a traffic impact. Once crews begin work on both bridge decks (riding surfaces) and the road widening, traffic will be shifted to maintain two permanent travel lanes in each direction throughout construction. Widening to the inside will be constructed first in Stage 1. This widening consists of what will be the new lane and a new full shoulder. This section is wide enough for
two lanes to be shifted onto the new portion of the bridges, while the existing bridge decks and steel are reconstructed in Stage 2. “Working in the river is an initial challenge and the reason they are building the temporary platform to work from,” said Stephen Bucy, P.E., assistant district engineer of construction for the SHA, district 6. “Water levels that can change drastically will be a challenge throughout the life of the project. When they get up on top, the volumes of traffic on I-81 and very high percentage of truck traffic requires limited temporary lane closure timeframes [only at night] and is challenging.” The SHA has worked closely with the National Park Service’s C&O Canal staff to ensure that there is limited disturbance to the canal. A three-sided structure will be built to protect those on the towpath from any potential overhead hazards. During major operations (setting steel beams as an example), flaggers will be positioned on each side of the towpath to temporarily hold bicycle and pedestrian traffic until it is safe to cross. “Coordinating with the National Park Service to keep the C&O Canal Towpath open and safe for users is a challenge, but one that is solved with good partnerships and
K. Plants Paving NetAuction Opening April 18th at 6:00pm • Closing Starts April 25th at 6:00pm Online Only • bid.teitsworth.com -2000 Freightliner TA Road Tractor. Day Cab. Detroit 60 Series 450HP. EF 13 speed. Wet Line (2 line). Ͳϭϵϵϯ /ŶƚĞƌŶĂƟŽŶĂů ϵϯϬϬ ƵŵƉ dƌƵĐŬ͘ ĞƚƌŽŝƚ ϲϬ ^ĞƌŝĞƐ ϭϮ͘ϳ> ϰϬϬ,W͘ & ϴ ƐƉĞĞĚ ǁͬ>>͘ ϳϬϴ< DŝůĞƐ͘ 'st͗ϳϯ͕ϮϴϬ >ďƐ͘ dĂŶĚĞŵ ǁŝƚŚ >ŝŌ ĂŶĚ ^ƚĞĞƌĂďůĞ DŝĚͲŵŽƵŶƚ WƵƐŚĞƌ džůĞ͘ ϭϴΖ ůƵŵŝŶƵŵ Ždž ǁŝƚŚ dĂƌƉŝŶŐ ^LJƐƚĞŵ͘ Ͳϭϵϵϲ 'D ϯϱϬϬ, ƵŵƉ͘ 'ĂƐ͘ ƵƚŽŵĂƟĐ͘ Ϯt ͘ ϱϱ͕ϳϴϵ DŝůĞƐ͘ ϴΖϲΗ tĞƐƚĞƌŶ WůŽǁ͘ ^ǁĞŶƐŽŶ Stainless Tailgate Sander. Ͳϭϵϵϭ ƚŶLJƌĞ ϱϬd ĚƌŽƉĚĞĐŬ >ŽǁďŽLJ͘ dƌŝͲĂdžůĞ͘ ĞƚĂĐŚ͘ ϮϯΖ tĞůů͘ ϭϲΖ ZĞĂƌ ƌĂŵƉ Θ ƉůĂƞŽƌŵ͘ Ͳϭϵϴϴ &ƌƵĞŚĂƵĨ d ƵŵƉ dƌĂŝůĞƌ͘ ^ƚĞĞů ĨƌĂŵĞ͘ ůƵŵŝŶƵŵ Ždž͘ ϯϬΖ >ŽŶŐ͘ ƵĂů ,ŝŶŐĞĚ dĂŝůŐĂƚĞ͘ ZŽůůͲZŝƚĞ dĂƌƉŝŶŐ ^LJƐƚĞŵ͘ Ͳϭϵϳϵ ZŽŐĞƌƐ Ϯϱd >ŽǁďŽLJ͘ d ͘ EŽŶͲĚĞƚĂĐŚĂďůĞ͘ ϯϲΖ >ŽŶŐ ǁŝƚŚ Ă ϮϮΖ ƌŽƉ͘ Ͳϭϵϳϵ :ŽŚŶƐŽŶ d >ŽŐ dƌĂŝůĞƌ͘ ϰϬΖ >ŽŶŐ͘ ϲ ƵŶŬƐ ǁŝƚŚ ƐƚƌĂƉƐ͘ Ͳϭϵϵϰ Ăƚ ϯϬϳ džĐĂǀĂƚŽƌ͘ &Ƶůů Ăď͘ ZƵďďĞƌ dƌĂĐŬƐ͘ WƵƐŚ
ůĂĚĞ͘ ϲϭϭϴ ,ŽƵƌƐ͘ ƵdžŝůŝĂƌLJ ,LJĚƌĂƵůŝĐƐ͘ ϮϰΗ ŝŐŐŝŶŐ ƵĐŬĞƚ͘ Ͳϭϵϵϵ :ŽŚŶ ĞĞƌĞ ϳϱϬ ŽnjĞƌ͘ ϭϮΖ tŝĚĞ ůĂĚĞ͘ ϲͲǁĂLJ ůĂĚĞ͘ ZKW^ KƉĞŶ Ăď͘ ϮϰΗ ǁŝĚĞ dƌĂĐŬƐ͘ Ͳϭϵϳϲ WĞƫďŽŶĞ zĂƌĚ ƌĂŶĞ͘ Model 30. 15T Capacity. ƵŵŵŝŶƐ sϲ ŝĞƐĞů ;ƌĞďƵŝůƚͿ͘ KƵƚƌŝŐŐĞƌƐ͘ ͲϭϵϳϬ ƵƐƟŶͲtĞƐƚĞƌŶ WĂĐĞƌ 300 Road Grader. Detroit 453 ŝĞƐĞů͘ ϲt ͘ ϭϮΖϳΗ DŽƵůĚ ŽĂƌĚ͘ ^ĐĂƌŝĮĞƌ͘ ůů ,LJĚƌĂƵůŝĐ Controls. Ͳϭϵϳϲ ůĂǁͲ<ŶŽǁ W&ͲϭϴϬ, WĂǀĞƌ͘ Ͳϭϵϵϭ DĂƵůĚŝŶ ϭϱϬϬ WĂǀĞƌ͘ ϯ ĐLJůŝŶĚĞƌ ĚŝĞƐĞů͘ dƌĂĐŬ ĚƌŝǀĞ͘ ϯϴϲϭ ,ŽƵƌƐ͘ ͲϭϵϴϬ dĂŵƉŽ ŽƵďůĞ ƌƵŵ Vibratory Roller. RS166A. ĞƚƌŽŝƚ ϯϱϯ ŝĞƐĞů͘ ϲϲΗ tŝĚĞ ƌƵŵƐ͘ ƵĂů ŽŶƚƌŽů ^ƚĂƟŽŶƐ͘ Ͳϭϵϵϰ WƌŽƚĞĐ ŽƵďůĞ ƌƵŵ Vibratory Roller. DX22. Diesel ƉŽǁĞƌ͘ ϯϵΗ tŝĚĞ ƌƵŵƐ͘ ϮϭϬϬ Lbs. Ͳ ƐĐŽ ϰϴΗ tŝĚĞ ŝƚĐŚŝŶŐ ƵĐŬĞƚ͘
Visit www.teitsworth.com for the full listing and photos! RTI Auctions • 6502 Barber Hill Road, Geneseo, NY • 585-243-1563
pre-planning,” Bucy said. “We are building a protective structure over the towpath section under the bridge.” At this early point in the project, the subcontractor list is limited, and includes C. William Hetzer, Hagerstown, Md., for paving and Redstone International, Uniontown, Pa., for drilling.
Major equipment being used on site includes rollers, dump trucks, excavators, cranes, man-lifts, grade-alls, Bobcats and screeds (for concrete deck work). (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
Maryland State Highway Administration photo
Work began in the fall of 2016, and completion is planned for the summer of 2020.
Two New Divisions...
Yanmar Announces Changes to Organizational Structure Effective April 1, 2017, Yanmar America is making changes to its organizational structure that will strengthen its customer support functions in accordance with the company’s growth strategy through the integration of business functions and a department design that will accelerate results. The key changes follow: The company’s current operations functions have been split to form two new divisions — manufacturing and operations. The manufacturing division will encompass manufacturing, production, quality management and procurement, and will be led by David Smith, current director of the operations division. The new operations division will include logistics, warehousing and facility maintenance/safety, and will be led by Director Doug Englert, who will move from his cur-
rent role as director of parts and REMAN. Yanmar America also has reorganized its aftersales and customer support functions under a new customer support division, which will consist of parts/accessories sales, marketing and procurement; customer service; and training/education. Arne Irwin has been named the customer support division manager, and will assume this role in addition to his role as division manager for energy systems. Other key leadership positions include Liston Edge, senior manager of parts & accessories; Rickey Walker, senior manager of customer service and Tim Miller, senior manager of training & education. For more information, visit www.yanmar.com/us. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 135
Page 136 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ABSOLUTE AUCTION Complete Liquidation Barbiche Brothers Construction, Inc. Wed., May 3, 2017 - 9:00AM Flemington, NJ
Live Onsite & Webcast
PUBLIC AUCTION THURSDAY, MAY 4TH AT 11:00 AM SECURED PARTY SALE
CONSTRUCTION EQUIPMENT
Hydraulic Excavators: `00 CAT 315BL, s/n 3AW02453 • `94 CAT 320L, s/n 9KK01577 • `05 CAT 304CR Mini, s/n NAD03511
• EXCAVATORS • LOADER • BACKHOES • DOZER •
Crawler Tractors: `02 CAT D4G LGP, s/n FDC00215 • `90 CAT D4H II, s/n 8PB03701 • `06 KOMATSU D21A-8, s/n 83703 •`86 CASE 850D, s/n 7402997
• COMPRESSOR • SUPPORT EQUIPMENT • PETTINI CONTRACTING CORPORATION
Crawler and Rubber Tired Loaders: `89 CAT 953, s/n 20Z02741 • `85 CAT 963, s/n 11Z00706 • `84 CAT 963 LGP, s/n 11Z00579 • `88 CAT 926E, s/n 94Z02286 4x4 Tractor Loader Extend-A-Hoes: `06 CAT 420E IT, s/n KMW00535 • `04 CAT 420D IT, s/n BLN10362 • `01 CAT 420D IT, s/n BLN02059 • `98 CAT 416C IT, s/n 1WR03463
(MOVED FOR CONVENIENCE OF SALE TO)
Skid Steer Loader and Utility Tractor: `02 BOBCAT S185, s/n 519029906 • KUBOTA L3750, s/n L3750DT-51611
387 NORTH MAIN STREET, NORWICH, CONNECTICUT
Vibratory Compactors and Maintainer: `95 IR SD115D, 144750 • `86 BOMAG BW172D, s/n 101520110133 • `87 HUBER M-850A Maintainer, s/n M-612
TO BE SOLD ON THE PREMISES & BY LIVE INTERNET BIDDING
Asphalt Paver and Vibratory Rollers: `12 WEILER P385 Crawler Asphalt Paver, s/n P385-1114 • `02 IR DD30, s/n 171313 • `94 BOMAG BW120AD-2, s/n 101170500973 • `88 BOMAG BW120AD, s/n 101170021596 • MULTIQUIP/ESSICK VR36H, s/n 980314
PLUS! Tag-A-Long Trailers • Fuel/Lube, Van Body, Flatbed, and Stake Trucks • Pickups • Brush Chipper • Walk Behind Trencher • Trench Compactor • Portable Air Compressors • Straw Blowers • Forklift • Equipment Attachments • Trench Boxes and Construction Materials • Contractors Tools • Shop Tools • Office Equipment
Call (800) 233-6898 or Email sales@hunyady.com
Aaron Posnik
For Complete Descriptive Brochure!
www.Hunyady.com PA Auction License No: AY000281 While information is believed to be accurate, all items will be sold “As-Is, Where-Is” without guarantee or warranty. A physical inspection is suggested.
To be held in our yard at the corner of routes 38 & 38B in Newark Valley, NY (19 miles west of Binghamton, 8 miles north of Owego exit 64 off I-86) A large portion of this auction will be an absolute spring cleanout from our new & used equipment business as well as quality consignments from local dealers & farmers. One of the areas nicest selections of quality used Farm & Construction equipment! 50+ Farm & Compact Tractors Crawler Collection: Oliver OC6 diesel w/pto, (2) OC6 gas w/pto 1 w/3pt, OC4 w/sprayer, Case 350 diesel w/remotes; All run & drive. Large Selection of Farm Machinery Construction Equipment: Bobcat E26 Excavator w/hyd. thumb nice; Bobcat 331 Excavator w/thumb; ‘12 Bobcat S175, Bobcat 883, (2) NH L865, Case 95XT, Gehl 3410, Mustang 320, Case 1530B Skid Steers’ Case 550 & 350 Dozers; Case 580 Super M 4wd Cab & EHOE, 580B Backhoes; TCM 806 Compact Wheel Loader; Case Davis 430 Loader “AS-IS”; Bobcat Diesel SSL “AS-IS”; Basic 601B Compact Grader; QC Boom for wheel loader; ‘96 Ford Super Duty Bucket Truck; New SSL Buckets, Forks, Weld On Plates; Fuel Tanks; New HD work benches & Shooting targets Terms: Cash or good check day of sale, 10% buyers premium only on items selling, for $1,000 and less. All items sold as-is and are subject to change due to daily business. Consignments welcome until the day before the sale, much more than listed! Forklift & Loader Tractors - Loading Dock - Lunch Onsite - Professional Sales Team Online Bidding Available
Goodrich Auction Service Inc. Newark Valley, NY
(607) 642-3293 www.Goodrichauctionservice.com Auctioneers: Ed Goodrich, Evan Goodrich, Greg Mcgrew, John Weidman
H
SALE PER ORDER OF SECURED PARTY KRISTEN FORBES CUDDY, ESQ. OF THE FIRM OF LAW OFFICE OF JOSEPH M. DIORIO, INC. 144 WESTMINSTER STREET, PROVIDENCE, RHODE ISLAND ATTORNEY FOR SECURED PARTY TERMS OF SALE: : 25% DEPOSIT CASH OR CERTIFIED CHECK 10% BUYERS PREMIUM APPLIES ON ALL ONSITE PURCHASES 13% BUYERS PREMIUM APPLIES ON ALL ONLINE PURCHASES OTHER TERMS TO BE ANNOUNCED AT TIME OF SALE INSPECTIONS: WEDNESDAY, MAY 3RD – 10:00 AM TO 4:00 PM & MORNING OF SALE – 8:30 AM TO 11:00 AM
Truck Tractor and Lowboy Trailer: `01 KENWORTH T800 T/A Truck Tractor • `02 TRAIL KING 35 Ton T/A Lowboy
Tuesday, May 2nd @ 9:00 AM
LIVE ONSITE & LIVE ONLINE BIDDING AVAILABLE AT WWW.BIDSPOTTER.COM SEND FOR DESCRIPTIVE PICTURED BROCHURE OR VISIT OUR WEB SITE AT: WWW.POSNIK.COM
Dump Trucks: `02 MACK RD688SX Tri-Axle • `93 DIAMOND REO TriAxle • `79 MACK RD685 T/A • `94 FORD L-9000 S/A • `94 FORD L-9000 S/A • `87 MACK R690T S/A • `87 MACK R690L S/A • `74 FORD F-750 S/A Dump/Water • `86 CHEVY C70 S/A Flatbed/Dump • `05 FORD F-550XL 4x4 Extended Cab • `06 FORD F-350XL 4x4 • `97 FORD F-350XL S/A
LARGE PUBLIC AUCTION
H
AUCTIONEERS APPRAISERS
West Springfield, MA • Philadelphia, PA 413-733-5238 • 610-853-6655
•
TOLL FREE 1-877-POSNIK1 • (767-6451)
MA Auc Lic #161 • PA Auc Lic #AY000241L
Web: www.posnik.com • Email: info@posnik.com
Liebherr Debuts Wide Range of Machines During ConExpo 2017 LIEBHERR from page 112
ent configurations with a maximum height of 110 ft. (33 m) and a maximum weight of approximately 105 tons (95 t), without attachments. It is driven by a powerful V12 diesel engine offering 805 hp (600 kW) (option: 1006 hp [750 kW]), which complies with the European emission standards, stage IV, and the U.S. Tier IV final. The LRB 355 has been specially designed for drilling with full displacement tool and achieves a torque of 331,902 lbf-ft (450 kNm) in this application. It can be used for other applications including: drilling with Kelly equipment, double rotary head and continuous flight auger, soil mixing, and piling jobs with vibrator and hydraulic hammer. Duty Cycle Crawler Crane HS 8130 HD The Liebherr duty cycle crawler crane HS 8130 HD can be used for various deep foundation applications or for the typical material handling tasks of a duty cycle crawler crane. These include working with slurry wall grabs and casing oscillators,
material loading with grab or dragline bucket, dynamic soil compaction, and various dredging applications. When developing the 143 ton (130 t) duty cycle crawler crane, Liebherr paid special attention to the robust design of the steel fabrication, the optimization of performance and safety, the easy and quick transportation, and fast set-up of the machine. The HS 8130 HD can be transported with the railings, catwalks and pedestals fully assembled on the upper carriage. This accelerates the mobilization of the crane on the job site. The undercarriage has been enlarged for the requirements of the U.S. market, and lowers the ground pressure of the crawler crane while increasing the lifting capacity. The HS 8130 HD is fitted with new generation diesel engines, and works with lowered engine speed. This results in a further reduction of fuel consumption and an increase in efficiency. The hydraulic system has been improved so the machine achieves a higher material handling capacity than the previous model, despite its lower engine power. For more information, visit www.liebherr.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 137
Unreserved public equipment auction Fast, flexible financing available – up to 100%, $0 down
3 – Caterpillar D7 w/19 Ft Boom
2011 John Deere 850J LGP
Komatsu WA200-5
Kobelco CK1000 100 Ton Self Erecting
2013 Case CX210C
2012 Volvo ECR305CL
1 of 3 – Case CX135SR
2012 Kobelco SK235SRLC-2
Glidered – 2015 Peterbilt 389
Sterling LT8501 w/Vactor 2115-06
1 of 3 – Ford F250 XLT
1 of 3 – 2014 North American Traffic
Hillsville, Virginia
May 4 (Thursday) 8 am
Equipment includes
Bid in person or online
Financing & leasing available
Location
Excavators, crawler tractors, wheel loaders, pipelayers, compactors, trucks, trailers, lifting & material handlers, shop tools, contractors supplies & much more
▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public, free registration
Up to 100% financing, with no money down.
5846 Coulson Church Rd, Austinville, VA
More items added daily Call about selling: 919.764.1900
See complete listings at rbauction.com Ritchie Bros. Auctioneers (America) Inc., Firm # 2908000624, James L. Valentine, Auctioneer Lic. # 2907003950 *Limited-time offer from Ritchie Bros. Financial Services. OAC. Terms & conditions apply. See rbauction.com/financing.
Page 138 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Alex Lyon & Son Holds Three-Day Sale in Atlantic City
A
lex Lyon & Son held an auction March 30 to April 1 at the Atlantic City Racetrack in Atlantic City, N.J.
The late-model rental equipment auction featured items from Herc Rentals, Neff Rentals, Sunbelt Rentals and Ahern Rentals. Going on the auction block during the three-day sale were: • 70 hydraulic excavators • 51 boom lifts • 27 vibratory rollers • 22 tractor loader backhoes • 16 skid steers • 42 telescopic forklifts • 88 scissor lifts • a wide assortment of trucks and trailers and much more. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipment- This bidder looks over a Komatsu WA140 backhoe guide.com.) CEG loader. Rental companies Herc, Sunbelt, Neff and Ahern consigned aerial lifts, forklifts and other support equipment to the auction sale.
The recent three-day Alex Lyon & Son Auction, held at the Atlantic City Race Track, saw more than 100 hydraulic excavators hit the auction block.
John Apple is president of Westchester Tractor, Brewster, N.Y. Westchester carries many quality lines, including Kobelco, KCM and Kubota, to name a few.
Alex Lyon & Son ring man Dean Adsit catches bids on a Caterpillar hydraulic excavator.
Harry Rice (L) of Komatsu Northeast, located in South Plainfield and Winslow, N.J., and Robert Harrell, Specialty Rentals & Attachments Co. Inc., Hammonton, N.J., attend the annual March auction sale.
Sitting in his new purchase is Randy Holt, Toms River, N.J. Hult was the high bidder on this Ford backhoe.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 139
Page 140 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
PUBLIC EQUIPMENT AUCTION SATURDAY, MAY 6, 2017 • 7:30 AM • WINDSOR LOCKS, CT
2002 KW W900 - 6NZ C15
Northern Connecticut’s Largest Industrial Auction Company SPECIALIZING IN ALL TYPES OF EARTHMOVING AND HEAVY EQUIPMENT, FLEET VEHICLES, TRUCKS, TRAILERS, AERIAL AND MATERIAL HANDLING EQUIPMENT, LANDCARE AND FARM EQUIPMENT SALES
2007 Ford F-550 - Crane!
FEATURING SUPER CLEAN SURPLUS EQUIPMENT FROM ROBERT BAKER COMPANY, RUSSO LAWN AND LANDSCAPE, METROPOLITAN DISTRICT COMMISSION, AREA DEALERS, CONTRACTORS, MUNICIPALITIES AND RENTAL OUTFITS
725 HOURS!
CONSIGNMENTS ACCEPTED THROUGH FRIDAY, APRIL 28, 2017 FOR A FULL LIST OF CONSIGNMENTS AND TO BID LIVE ONLINE PLEASE VISIT OUR WEBSITE AT:
WWW.SALESAUCTIONCOMPANY.COM
2013 Volvo SD115
Office
Fax
(860)627-7506
(860)903-1015
55 KING SPRING RD. WINDSOR LOCKS, CT 06096
COMMONWEALTH OF PA SURPLUS ONLINE AUCTION
SPRING HEAVY EQUIPMENT AUCTION
P
T
TANDEM AXLE DUMP TRUCKS, SINGLE AXLE DUMP TRUCKS, LOADERS, GRADERS, BACKHOES, ASPHALT EQUIPMENT AND MORE
ONLINE AUCTION - SEE WEBSITE FOR DETAILS!
www.equipmentone.com First lot scheduled to close Tues., June 6 • 10:00 am Auction Location: Harrisburg, PA and other originating yards.
Stuart D. Myers, Auctioneers • PA Lic. #AU005681
ccc{ O]PG <G ;G >{ <RO
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 141
BusinessCalendar To view our Business Calendar online, go to www.constructionequipmentguide.com.
of the Des Moines Public Library and has also been awarded LEED Platinum certification. Mingle with your peers and check out the interactive educational exhibits while you enjoy delicious food and drinks! For more information, contact American Public Works Association, 1200 Main Street, Suite 1400, Kansas City, MO. Toll Free: 800/848-2792. Local: 816/472-6100. Fax: 816/472-1610.
LANO EQUIPMENT, INC. OPEN HOUSE DATE 2017: APWA – American Public Works Association Lano Equipment, Inc. 2017 PWX Registration is NOW OPEN! 3021 133rd Street W. Make plans now to be in Orlando, FL August 27-30, 2017! SHAKOPEE, MINNESOTA 55379 OPEN HOUSE DATE for Shakopee, MN is FRIDAY, APRIL 21, Come experience all the public works profession has to offer in Orlando at PWX 2017. PWX draws thousands of profession2017 als from all over the world. If you are like many of them, you For more information, please call 952/445-6310 have limited resources for professional development. PWX 4th ANNUAL FLEXIBLE & COST EFFECTIVE 2017 should be at the top of your list if you are looking for WELL SITE FACILITIES ONSHORE 2017 OUTSTANDING EDUCATION SESSIONS; a chance to meet with DATES: 27 September to 28 September, 2017 an extensive gathering of EXHIBITORS SHOWCASING THE LATPLACE: Houston, TX EST PRODUCTS, SERVICES and TECHNOLOGIES; and for North America’s Only Initiative Dedicated Entirely to OPPORTUNITIES TO NETWORK WITH YOUR PEERS, HONE Facilities Engineers & Project Management Professionals YOUR LEADERSHIP ABILITIES and LEARN NEW JOB SKILLS! For more information, visit the event website: www.facilities- Join nearly 6,000 of your public works colleagues from North design-onshore.com America and beyond in Orlando for this exciting event! Register Today! AGC of America (The Associated General Contractors of American Public Works Association America) is the leading association for the construction indus- Contact: 1200 Main Street, Suite 1400 try. With over 26,000 member firms, AGC provides a full range Kansas City, MO 64105-2100 of services satisfying the needs and concerns of its members, Toll Free: 800/848-2792 thereby improving the quality of construction and protecting the Local: 816/472-6100 public interest. The AGC of America is comprised of 92 charFax: 816/472-1610 tered Chapter affiliates and provides its Chapters and their members with professional development opportunities, up-tothe-minute information and trends in the industry, and dis- FIRE RETARDANTS IN PLASTICS 2017 CONFERENCE counts on products, programs and services. To become a DATES: TUESDAY, APRIL 25, 2017 and WEDNESDAY, APRIL member of AGC of America you must first become a member of 26, 2017 a local AGC Chapter. Upon joining your local Chapter, you will PLACE: THE WESTIN CONVENTION CENTER PITTSBURGH, automatically receive the added value of membership in AGC of PITTSBURGH, PA, USA America. We look forward to welcoming you to the premier The Fire Retardants in Plastics Conference, organized by the construction trade association, The Associated General Applied Market Information, Ltd., will take place from 25th to Contractors of America. For more information, contact AGC 26th April 2017 at The Westin Convention Center Pittsburgh, main office at 2300 Wilson Boulevard, Suite 300, Arlington, VA Pittsburgh, PA, USA. The conference will cover areas such as: 22201. Phone: 703/548-3118. Fax: 703/548-3119. Flame Retardancy; Material Developments; Additives; Email: Info@agc.org. Reactants; Processes and Formulations; Standards, Testing, Regulatory Developments; Market Conditions and Technical AGC – The Associated General Contractors of America Challenges. For more information on this conference, contact WebEd: 2017 Outlook: More Potential, More Uncertainty Applied Market Information, LLC at 610/478-0800 or go to Tuesday, April 25, 2017 – 2:00 PM to 3:00 PM www.amiplastics-na.com. Construction Economics AGC – The Associated General Contractors of America Federal Contractors Conference Monday, May 1, 2017 to Wednesday, May 3, 2017 Washington, District of Columbia AGC – The Associated General Contractors of America TCC Fly-In 2017 Wednesday, May 17, 2017 to Thursday, May 18, 2017 Washington, District of Columbia Division and Committee Meetings
3rd ANNUAL PRODUCTION CHEMICALS OPTIMIZATION UNCONVENTIONAL OIL & GAS 2017 DATES: JUNE 27, 28 & 29, 2017 LOCATION: HOUSTON, TEXAS If you are spending millions of dollars a year on production chemicals, you need to make sure your program performs. Save the dates and reserve your place early for the 3rd Annual Production Chemical Optimization 2017 Congress, the number one production chemicals optimization event in North America returning to Houston, TX on June 27, 28 and 29, 2017
The 2017 conference will not only deliver brand new E&P success stories, new technologies and innovative ways of operating chemical programs to efficiently reduce lease operating expenses, but also give you the added option of attending specially designed pre-conference workshops to explore ways to implement the latest tools to market within a practical context. AGC – The Associated General Contractors of America Sponsorship & Exhibition Opportunities Available – Following WebEd: Key Tips for General Contractors & Subcontractors to two (2) consecutive years of sold-out exhibition, this is the Unlock Subcontract Negotiations only one-stop shop for North American E&Ps looking for the Wednesday, May 24, 2017 – 2:00 PM to 3:00 PM most innovative products, services and technologies in this Contracts and Construction Law space. If having your company aligned with powerhouses in All AGC WebEds are scheduled in Eastern Standard Time (EST). the industry is an important part of your strategy, this event gives you enormous opportunities to capitalize on. There is AGC – The Associated General Contractors of America really no other event in the region that will give you the chance AGC Safety & Health Conference to meet all the active operators with the right purchasing job Wednesday, July 19, 2017 to Friday, July 21, 2017 titles. Denver, Colorado Please contact the ABC team at sponsorship@american-business-conferences.com or CALL: 800/721-3915. MN ASPHALT PAVEMENT ASSOCIATION MAPA 4th ANNUAL GOLF EVENT BONNELL EQUIPMENT EXPO 2017 DATE: MONDAY, AUGUST 14, 2017 BONNELL INDUSTRIES, INC. TRUCK & ROAD EQUIPMENT PLACE: 12800 BUNKER PRAIRIE ROAD NW CLEAR THE WAY FOR…JUNE 7 or JUNE 8, 2017 COON RAPIDS, MN Dates: June 7 and June 8, 2017 Place: 1385 Franklin Grove Road, Dixon, IL 61021 APWA – American Public Works Association DEMONSTRATIONS – DOOR PRIZES – FREE LUNCH – NEW & North American Snow Conference 2017 OLD EQUIPMENT - PICK ONE DAY TO ATTEND THE EXPO! EACH Des Moines, Iowa CUSTOMER WILL GET ONE (1) FREE LUNCH TICKET FOR ONE Dates: April 23 thru 26, 2017 DAY OF THE EXPO. Quality products, people and food is what 2017 Snow Conference Special Events Bonnell Industries Equipment Expos are known for. Step into After experiencing all of the educational sessions and exhibits our manufacturing facility all while viewing our vendors’ latest the Snow Conference has to offer, attendees and guests are advancements in products. invited to take part in one of #Show4Snow’s unique special RSVP by JUNE 1, 2017 events! CALL: 815/315-2617 or EMAIL: marketing@bonnell.com or Snow Trek contact your sales representative. Monday, April 24 – (Optional Event) Time: 6:00 PM to 11:00 PM IOWA LAND IMPROVEMENT CONTRACTORS ASSOCIATION The APWA Iowa Chapter has arranged a fun evening that will (IALICA) take you on a trek to some of Des Moines’ most popular brew Dedicated to Professional Conservation of Soil and Water pubs. Hop on and off the bus whenever you want – stay at one 2017 NATIONAL SUMMER MEETING pub all evening or move on and visit them all. You’re sure to WHEN: JULY 11, 2017 to JULY 16, 2017 (all-day) run into lots of your Snow Conference friends along the way! WHERE: ELEGANTE HOTEL, COLORADO SPRINGS, CO Snow Celebration Reception (USA) Tuesday, April 25 For more information on the 2017 National Summer Meeting Time: 6:00 PM to 9:00 PM you may contact National LICA: A top attraction to Des Moines, the World Food Prize Hall of Telephone: 630/548-1984 Laureates is also the location of this year’s Snow Celebration Fax: 630/548-9189 Reception. This beautiful historic building is the former home Email: NLICA@aol.com AGC – The Associated General Contractors of America 2017 ACI-NA/ACC/AGC Airport Construction Strategy Summit Tuesday, May 23, 2017 to Wednesday, May 24, 2017 Los Angeles, California
Page 142 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX AARON POSNIK AUCTIONEERS
FIVE STAR EQUIPMENT INC.................................. 39
NORRIS SALES CO INC.......................................... 12
NORWICH CT 05/04.................................... 136
FLUID CONTROL SERVICES.................................. 42
NPK CONSTRUCTION EQUIPMENT INC................89
ADVANCE TIRE........................................................ 24
FLUID POWER........................................................128
OPDYKE INC............................................................ 47
AIM ATTACHMENTS................................................ 90
FOLEY INC............................................................ 9,21
PAVEMENT RECYCLERS/BAGELA USA................ 68
ALEX LYON & SON INC
GEHL SKID STEER.................................................. 76
PENN JERSEY MACHINERY.................................... 5
PLAN AHEAD CALENDAR.......................... 133
GEORGE & SWEDE SALES.................................... 36
PENNDOT COMM OF PA
DOVER OH 4/27 CUMBERLAND ME 4/28.. 135
GOMACO CORP...................................................... 70
AUBURN ME 5/5 BURLINGTON VT 5/6...... 139
GOODRICH AUCTION
COMMONWEALTH OF PA 6/6.................... 140 PETERSON PACIFIC CORP.................................. 115
NEWARK VALLEY NY 05/02........................ 136
PINE BUSH EQUIPMENT CO.................................. 25
ALEX PARIS CONTRACTING CO INC.................... 23
GSE&E GARDEN STATE ENGINE & EQUIPMENT.... 44
PIRTEK USA............................................................ 47
ALL ISLAND EQUIPMENT CORP.............................. 7
H O PENN MACHINERY CO INC............................ 17
PLASTERER EQUIPMENT CO INC.......................... 6
ALLIED CONSTRUCTION PRODUCTS.................. 91
HALE TRAILER BRAKE & WHEEL.......................... 18
RANSOME CAT.......................................................... 2
AMERICAN EQUIPMENT LLC..................................42
HARTER EQUIPMENT INC...................................... 19
RANSOME EQUIPMENT SALES LLC/LRH............131
ARTIC SNOW & ICE CONTROL PRODUCTS...... 122
HELAC INC................................................................44
RAYCO...................................................................... 52
ASPHALT CARE EQUIPMENT................................ 62
HITACHI CONSTRUCTION MACHINERY.............. 117
RITCHIE BROS AUCTIONEERS
ATI CORPORATION/LEVEL BEST.......................... 90
HOFFMAN EQUIPMENT INC.................................. 16
HILLSVILLE VA 05/04.................................. 137
BARGAINS.............................................................. 129
HRT/GEOMETRY GLOBAL INC.............................. 95
UNRESERVED PUBLIC AUCTIONS............ 144
BASCHMANN SERVICES INC................................ 37
HUNYADY AUCTION CO
PROVIDENCE RI 5/13..................................141
ROAD BUILDERS MACHINERY & SUPPLY.......... 128
BELL TRUCKS AMERICA INC................................ 113
FLEMINGTON NJ 05/03.............................. 136
ROADTEC................................................................ 59
BEST LINE EQUIPMENT.......................................... 29
HYDREMA U S INC.................................................. 45
ROSCO MFG CO...................................................... 67
BLANCHARD MACHINERY INC.............................. 53
HYUNDAI CONSTRUCTION EQUIPMENT............ 108
ROY TEITSWORTH INC
BOMAG.................................................................... 56
ICUEE - ASSOC OF EQUIPMENT MFRS.............. 107
SHINGLEHOUSE PA 04/8-25...................... 134
BRANDYWINE TRUCKS & EQUIPMENT CO.......... 39
ISUZU DIESEL.......................................................... 85
SAKAI AMERICA INC................................................71
BROWN BEAR CORP.............................................. 97
J D EQUIPMENT.................................................... 118
SALES AUCTION COMPANY LLC
CALDER BROTHERS CORPORATION....................69
JCB INC.................................................................... 86
WINDSOR LOCKS CT 05/06........................140
CASE CONSTRUCTION........................................ 101
JESCO........................................................................ 3
SEC EQUIPMENT.................................................... 52
CATERPILLAR INC .................................................. 79
JFW EQUIPMENT INC..............................................60
SHORQUIP SUPPLY INC........................................ 41
CEG SCALE MODELS............................................ 114
JOHN DEERE..........................................................121
SILVI CONCRETE.................................................... 29
CLASSIFIEDS........................................................ 130
JOHN DEERE SKID STEER.................................... 81
ST PIERRE MANUFACTURING CORP....................44
CLEVELAND BROTHERS EQUIPMENT CO.......... 26
KOMATSU AMERICA CORP.................................. 125
STEPHENSON EQUIPMENT INC............................ 11
COMPANY WRENCH................................................33
KUBOTA.................................................................. 119
TAKEUCHI................................................................ 92
CONSTRUCTION EQUIPMENT GUIDE.... 54,74,127,131
KUBOTA SVL............................................................ 77
TRACEY ROAD EQUIPMENT INC.......................... 15
DEACON EQUIPMENT CO INC..............................115
LABOUNTY MANUFACTURING INC......................123
TRANSPORT EQUIPMENT SALES..........................43
DITCH WITCH EQUIPMENT CO............................ 118
LEEBOY.................................................................... 61
TRENCH SHORING SERVICES.............................. 51
DOMINION EQUIPMENT PARTS.......................... 128
LINK-BELT EXCAVATORS...................................... 110
TRENCHTECH.......................................................... 31
DOOSAN INFRACORE AMERICA..........................104
MB AMERICA INC.................................................... 48
VOLVO COMPACTION............................................ 63
DUAL DOZER............................................................95
MESSICK’S.............................................................. 97
VOLVO CONSTRUCTION EQUIPMENT.................. 72
DYNAPAC..................................................................57
METSO MINERALS SCREENING............................ 98
VOLVO FINANCIAL SERVICES..............................105
EAGER BEAVER TRAILERS.................................... 49
MIDLANTIC MACHINERY........................................ 13
WACKER NEUSON CORP...................................... 82
EAGLE POWER & EQUIPMENT CORP................ 143
MIKE ZYNDORF LLC................................................40
WEACO.................................................................... 24
EDWARD EHRBAR.................................................. 10
MILTON CAT..............................................................32
WESTCHESTER TRACTOR INC..............................24
ELLIOTT & FRANTZ INC.................................... 36,51
MUNICIBID.COM.................................................... 140
WIRTGEN AMERICA................................................ 64
EQUIPMENT MART OF NEW YORK........................35
MUSTANG CO-OP.................................................... 97
WOODS CRW CORP................................................20
ESCO CORP............................................................ 95
NATIONAL ATTACHMENTS...................................... 53
YANMAR AMERICA CORP.................................... 103
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 19, 2017 • Page 143
w w w. e a g l e p o w e r a n d e q u i p m e n t . c o m
Introducing the New Case CX D Series Excavator
RECENT TRADES
2012 Takeuchi TW800C Compact Wheel Loader, Stk# 36115, 1108 Hrs......................................................................$56,400
2013 Case 580SN Loader Backhoe, Stk# 33614, 1112 Hrs...... ................................................................................................ $86,066
2013 Case 650L Dozer, Stk# 36209, 898 Hrs................. $79,000
2003 Case 550HWT Dozer, Stk# 37336, 1475 Hrs........ $37,000
2008 Case 420 Skid Steer, Stk# 37070, 1305 Hrs........ $18,500
2004 Case 580SM II Loader Backhoe, Stk# 36623, 5883 Hrs.. ................................................................................................ $35,300
Authorized Dealer for These Quality Lines: Toro Dingos, Trenchers, Horizontal Directional Drills • Eager Beaver & CAM Trailers • Rammer by Allied Hydraulic Hammers & Shakers • Ring-O-Matic Vacuum Excavation • Airman Portable Air Compressors • Paladin Attachments Planers, Brooms, Buckets • Trailking Trailers
Frank Beck
Pat DiCicco
Dean J. Leonetti
Jim Lutz
Tom Scott
Rich Verna
Dean R. Leonetti
Brandon Jewell
Key Account Manager Montgomery County, PA
Key Account Manager, Philadelphia County, PA & Eastern Bucks County, PA
Philadelphia County, PA and Eastern Bucks County, PA
Montgomery County, PA and Western Bucks County, PA
New Castle County, DE, Cecil County, MD and Southern Chester County, PA
Chester County, PA and Delaware County, PA
Sales Manager
Toro Dingo Specialist
215/699-5871
610/312-3995
215/870-4546
215/680-9203
215/783-1847
215/870-8567
302/530-9134
610/420-4770
953 Bethlehem Pk (Route 309) Montgomeryville, PA 18936 215/699-5871 Fax 215/699-6416 NEW HOURS Mon.-Fri. 7AM-5:30PM
2211 Dupont Highway New Castle, DE 19720 302/652-3028 Fax 302/652-7540 NEW HOURS Mon.-Fri. 7AM-5PM
55 Senn Drive Eagle, PA 610/458-7054 Fax 610/458-7094 NEW HOURS Mon.-Fri. 7:30AM-4PM
Page 144 • April 19, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Unreserved public equipment auctions
14 5+
80 0+
HY DR AU LIC EX CA VA TO RS
AR TIC UL ATE DD UM PT RU CK S
Fast, flexible financing available – up to 100%, $0 down
MU LTI TE RR AIN
DU MP TR UC KS
19 5+
LO AD ER BA CK HO ES
79 5+
CO MP AC TO RS
Ingersoll-Rand 340T | North Franklin
LO AD ER S
11 0+
13 5+
MO TO RG RA DE RS
60 +
3 – 2011 Caterpillar 299C XPS 2 Spd High Flow North Franklin
2 – Mack CV713 Granite | North Franklin
2015 Komatsu GD655-5 | St. John's
PA VE RS
1 of 3 – 2015 Komatsu PC360LC-10 | St. John's
16 0+
1 of 5 – 2015 Komatsu HM300-5 | St. John's
Kenworth T800| North Franklin
Ingersoll-Rand DD118HFA | North Franklin
2011 John Deere 710J 4x4 | North Franklin
37,790+ items in 145+ auctions including North Franklin, CT Apr 28 Prince George, BC, CAN May 2 Klamath Falls, OR May 4 Hillsville, VA May 4 Grand Junction, CO May 10 Toronto, ON, CAN May 10–11 Dealer # DA3207, Ritchie Bros. Auctioneers (America) Inc., Firm # 2908000624, James L. Valentine, Auctioneer Lic. # 2907003950, MV Dealer #10541, MV Dealer No. 4585592, OAC. Terms & conditions apply. See rbauction.com
Lincoln, NE St. John's, NL, CAN
May 11 May 16
Financing & leasing available Up to 100% financing, with no money down.
Bid in person or online ▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public, free registration
More items added daily Call about selling: 1.800.211.3983
See full auction & equipment listings at rbauction.com