Project Designers Get Creative On I-81
By Chuck MacDonald CEG CORRESPONDENT
When the Virginia Department of Transportation (VDOT) began studying the numbers on I-81 in the Bristol area, the conclusion seemed obvious. With more than 50,000 vehicles traveling between exits 7 and 10, traffic
was backing up. Congestion relief was needed. Adding a third southbound lane was the obvious solution.
As VDOT’s design team dug into the information, they found that adding a third southbound lane would help alleviate that congestion and improve safety. As designers sketched out the project, they came to a happy discovery. By carv-
ing the new lane out of the median, the construction team also could add a third northbound lane for one mile at a reduced cost.
Gene Holley is the I-81 Corridor Improvement Program (CIP) coordinator of VDOT’s Bristol District and Dave Covington is the VDOT I-81 program delivery director.
see LANES page 70
Powering Domestic EV Production
Energy Department Funding Will Bring Manufacturing Plants Online
By Lucy Perry CEG CORRESPONDENT
In July, the Biden administration announced it would fund $1.7 billion for electric vehicle component production at 11 manufacturing plants across the country. In doing so, the fed made progress toward both ending the nation’s dependence on China for batteries and meeting its 2030 goal of making 50 percent of all new U.S. vehicle sales electric or hybrid models. Eight plants currently
or at-risk of closing
Outback Parts is linked nationwide with three used parts networks, so finding dependable parts fast and conveniently is never a problem.
Outback Parts also supplies replacement parts for Non-Cat® machines. So when you’re needing parts, call or visit us on-line.
8 N.Y. ANNOUNCES MAJOR RAIL BRIDGE PROJECT ACROSS HUDSON
Work is under way on a $634.8 million project to build a modern rail bridge, which will replace an early 20th century structure, and is located at the site of an even earlier Civil War-era passenger rail bridge spanning the Hudson River.
12 H.O. PENN MACHINERY TALKS CAT REBUILDS AT SUBWAY SERIES
Crosstown rivals, the New York Mets and Yankees played on June 26, 2024, through rain delays and thunderstorm warnings, but they were not the only ones bracing the storm with hopes of winning.
16 N.J., N.Y. CELEBRATE DEAL TO FULLY FUND HUDSON TUNNEL PROJECT
Officials from New Jersey and New York convened in Manhattan July 8 to celebrate a major funding agreement that finalizes a long-awaited cross-Hudson rail project that will double capacity.
22 SKANSKA JV LANDS CONTRACT FOR EAST RIVER TUNNEL PROJECT
Skanska, a global construction and development firm, and joint venture partner, E-J Electric Installation Co., announced it has been awarded a contract by Amtrak to lead the East River Tunnel Rehabilitation Project in New York.
22 LANDSCAPE CONTRACTORS TRY LATEST EQUIPMENT AT EQUIP EXPO
Equip Exposition, held Oct. 15-18 at the Kentucky Exposition Center, is where the newest outdoor power equipment and most innovative tools for landscape contractors can be explored and tested.
24 SCA RECEIVES GRANT TO REDUCE EMBODIED GREENHOUSE GASES
The Slag Cement Association announced that the U.S. Environmental Protection Agency has selected SCA to be a recipient of its grant aimed at reducing embodied greenhouse gas emissions for construction materials and products.
28
MONROE TRACTOR WELCOMES JOHN WILBER AS BRANCH MANAGER
John Wilber has joined Monroe Tractor’s Syracuse, N.Y., location as branch manager. Although he is new to the construction industry, Wilber brings extensive management and customer service skills.
Founder Emeritus
NORTHEAST EDITION
28
CONTRACTORS ASSOCIATION
OF WEST VIRGINIA ELECTS 2024 OFFICERS
James W. “Tripp” Dailey III, president of W. Harley Miller Contractors Inc., Martinsburg, W.Va., has been elected president of the Contractors Association of West Virginia (CAWV).
28 CHODKOWSKI JOINS BASCHMANN SERVICES AS SALES REPRESENTATIVE
Baschmann Services, in Elma, N.Y., announced that Kevin Chodkowski has joined its staff in the position of sales representative in northern Erie and Niagara counties of New York.
44 FAYAT ACQUIRES CONTROLLING INTEREST IN ASPHALT DRUM MIXERS
FAYAT has acquired a controlling interest in Asphalt Drum Mixers LLC (ADM), based in Huntertown, Ind., which manufactures asphalt plants and components for contractors and asphalt producers worldwide.
46 WOMEN OF ASPHALT LAUNCHES SCHOLARSHIP PROGRAM
Women of Asphalt (WofA) announced the launch of a new scholarship program in partnership with Caterpillar Inc., aimed at empowering women in the asphalt industry.
50 DYNAPAC WRAPPED PAVER TO SHINE A LIGHT ON
The construction industry, while often celebrated for its resilience and productivity, faces a silent crisis that demands urgent attention: suicide among its workforce. 68
JCB announced a special long-term partnership with multi-GRAMMY award winning musician and Rock and Roll Hall of Fame inductee Joe Walsh and his veterans organization and annual benefit festival, VetsAid.
90 LBX CO., EMPLOYEES CELEBRATE 150 YEARS OF LINK-BELT
The event featured various activities, including food, demonstrations, music and games. Employees reminisced about significant milestones in company history while looking toward future endeavors.
Each year, Alex Lyon & Son holds a customer appreciation event at the company’s headquarters in Bridgeport, N.Y., which also is the location for Jack Lyon’s home and family farm.
• Western Pennsylvania
Cell 260/760-0521 e-mail nspain@cegltd.com
Teddy McKeon
• Delaware • Maryland 215/885-2900
Cell 215-260-8709 e-mail tmckeonjr@cegltd.com
THE DOER’S DREAM
Loved for the features. Trusted for the performance.
Hyundai wheel loaders have the power and performance, not to mention top-notch interiors, accurate onboard weighing system, industry proven drivetrain durability, clear sightlines, and handy tech that make life on the jobsite easier. So you can do more without feeling it. No wonder so many first-time Hyundai users become longtime fans.
cyl Mercedes twin turbo, 23.5R25 rubber, stk#HT059................ $127,500
10042, 4,545 hours, 10k lb lift, 42 ft lift height, 4x4, orops, 5 ft forks, tilt body, 4 cyl Cummins turbo, stk#FL324....................................................$44,500
2)2015 Hitachi ZX35U-5N, 2,059 hours, 18" bucket, hyd thumb, manual coupler, cab w/ a/c, 2 speed, 68" blade, swing boom, 3 cyl Yanmar, 7.6k lbs, stk#MX055..$39,500
2017 Doosan DX140LCR-5, 4,288 hours, 32" bucket, hydraulic thumb, a/c, 4 cyl Perkins turbo, 2 speed, backup camera, 33k lbs, stk#XC730....................................$77,500
2014 Caterpillar CB22B, 1,352 hours, 40" smooth double drum, vibratory, orops, 3 cyl Cat C1.5 turbo, 6k lbs, stk#CO137..............................................................$24,500
2017 Vermeer RTX250, 738 hours, walk-behind trencher, 4 ft blade, 6" trencher width, crumber, 2 cyl Kohler gas, good rubber tracks, stk#TH977..........................................$7,500
2011 JLG 800S, 4,326 hours, 80 ft boom lift, 4x4, 8 ft basket, 3-phase skypower, 4 cyl Deutz dsl, stk#AE321..........$29,950
N.Y. Announces Major Rail Bridge Project Across Hudson
In New York State, work has gotten under way on a $634.8 million project to build a modern Livingston Avenue Rail Bridge, which will replace an early 20th century structure, and is located at the site of an even earlier Civil Warera passenger rail bridge spanning the Hudson River between the cities of Albany and Rensselaer.
Gov. Kathy Hochul made the announcement July 12, adding that the new bridge is designed to provide a modern crossing that will improve service and reliability along New York State’s Empire Corridor and throughout the entire northeast.
In addition, Hochul said a separate $10 million contract will demolish the Central Warehouse, a blighted building in downtown Albany, pieces of which have fallen onto nearby rail tracks disrupting Amtrak service for thousands of New Yorkers.
The scope of the design-build project includes the replacement of the Livingston Avenue Bridge, as well as the addition of a movable two-track vertical lift railroad bridge over the Hudson River.
New Yorkers.
“The Empire Corridor is a gateway to the U.S. economy, powering innovation and industry for businesses in New York State and beyond,” she said at the project’s site along the banks of the Hudson. “We’re making investments in two critical pieces of infrastructure to unlock the potential for further growth and to ensure this vital corridor will be strong for decades to come.”
Livingston Avenue Bridge Construction
A new seven-span, lift-type bridge meeting 21st century standards for height, width, and speeds will be constructed just south of the existing bridge, according to state transportation officials. It also will be wider and designed to carry heavier freight train loads, in addition to two passenger trains at the same time. The structure will handle taller rail cars, allowing for more freight, and will more reliably accommodate marine traffic on the Hudson River.
As part of the work, a separated shareduse path will be created to provide a muchneeded river crossing for pedestrians and cyclists, allowing easy connections to the Albany Skyway, the Empire State Trail, the future Rensselaer Riverwalk — a portion of which is being constructed as part of this project — and other area attractions.
Hochul’s office noted that replacement of the bridge is being funded as part of the historic $33 billion, five-year New York State Department of Transportation (NYSDOT) Capital Plan and is a signature project exemplifying the governor’s commitment to investing in projects that reconnect communities, enhance quality of life, and foster growth and economic opportunity for all
The state transportation agency anticipates that the Livingston Avenue Rail Bridge project will be completed in the summer of 2028. The new span will be constructed alongside the existing structure before shifting train traffic to the new bridge upon its completion. The current rail structure across the Hudson will remain in use until that time, thus limiting disruptions before being removed.
“At long last, the time has finally come to replace the Livingston Avenue Bridge,” explained Marie Therese Dominguez, commissioner of the NYSDOT. “This new structure will provide a safer, more resilient, and more efficient crossing of the Hudson River for passenger and freight trains, which will improve service and reduce delays throughout the corridor. The bridge will also tie the communities along the Hudson River closer together and promote recreation and tourism by providing a direct pedestrian and bicyclist connection between the Albany-Rensselaer Station and the Albany Skyway and Empire State Trail.”
In addition to funding from the capital plan, NYSDOT also continues to seek federal competitive grant funding for the Livingston Avenue Bridge project under the Bipartisan Infrastructure Law.
River Crossing Point Has Long History
The original structure over the Hudson River opened in 1865 and its piles were later used in the construction of the current Livingston Avenue Bridge in 1901.
The existing structure, owned by CSX and leased to Amtrak, is nearing the end of its serviceable life and does not meet current standards related to load, speed and height
clearance, Hochul noted. As a result, passenger and freight trains operating over the bridge are forced to abide by weight and speed restrictions. This also limits the types of carriages and freight that can traverse the span.
Its restrictions mean that the two-track bridge can be used only by one train at a time at maximum speeds of 15 mph, contributing to delays in the movement of freight and passengers throughout New York State.
The current daily service across the bridge includes 12 Amtrak passenger trains and roughly two to six freight trains — owned by Canadian Pacific Railway and CSX. The span is a critical link for passenger rail service as no detour is available without creating delays of more than two hours.
“Service to the Capital Region is a critical part of Amtrak’s network and the Livingston Avenue Bridge is the lynchpin connecting New York City and the Hudson Valley to the rest of the Empire State and beyond,” noted Amtrak CEO Stephen Gardner. “Ridership on the Empire service is already some of the strongest in the country and thanks to the leadership of Gov. Hochul, NYSDOT, and the New York Congressional delegation, this new bridge will improve train travel in the region.”
Central Warehouse Demolition
Albany County will facilitate the safe demolition of the Central Warehouse, allowing the property to be developed in a way that benefits the community and boosts the economy, according to Hochul’s office.
The project is funded by the Restore New York Communities Initiative, which supports municipal revitalization efforts across the state, helping to remove blight, reinvigorate downtowns and generate economic
opportunity in communities statewide.
Administered by Empire State Development, the program is designed to help local governments revitalize their communities and encourage commercial investment, improve the local housing stock, put properties back on the tax rolls and increase the local tax base.
“This is tremendous news for the future of passenger rail in Upstate New York,” explained New York Democratic Sen. Charles Schumer, who also serves as the Senate’s majority leader. “For the continuation of nautical traffic along the Hudson River, and for the long dreamt of goal of a pedestrian crossing between Albany and Rensselaer. I additionally applaud Governor Hochul and the state government for stepping up to address the Central Warehouse eyesore, and I am pleased that Albany County has decided to use $3 million of the American Rescue Plan funding that I secured to help with the demolition as well. These two projects will benefit the Capital Region for generations to come.”
His fellow New Yorker in the U.S. House, Rep. Paul Tonko, D-20th District, said, “As a passionate advocate for train travel — who uses Amtrak nearly every week to travel between our district and D.C. — I believe that accessible, efficient train use across New York State is critical to renew our communities, create jobs, bolster our local economies, and take carbon-emitting vehicles off our strained highways.
“There is much more work to be done to drive investments in worthy transportations projects like this bridge rehabilitation and I pledge to keep working to ensure further transformational investments are delivered to better connect and serve our Capital Region communities.”
Albany Mayor Kathy Sheehan said she believes the two major projects in her city will have a significant impact, noting that the state’s more than $600 million commitment to the Livingston Avenue Bridge replacement “will not only improve the function of the ninth-busiest train station in the nation but will also bolster recreation on our Hudson River through creation of a pedestrian and bicycle-friendly path, connecting Albany’s riverfront to our eastern neighbors.”
Sheehan and Albany County Executive Daniel P. McCoy each applauded Hochul pushing through the funding for the demolition of the Central Warehouse, which McCoy noted “will bring the space currently occupied by this hazardous building back to life.”
ROGERS 55 TON
No-Foot Neck, 25' deck, adjustable width bi-fold front ramps, deep well pocket in deck with inserts & planks on grade, 275's on aluminum outers, extra lights, Strobes in rear, mini strobes on sides, Air Lift 3rd, hangers & supply for optional 4th axle, Black paint.
Rogers 55 Ton CobraNeck, Severe Service Design. 2-position pin, ratchet ride height, adjustable width bi-fold steel ramps, 26' clear deck, deep well pocket, chain bins, tool boxes, 275's, alum. outers, side reinforcing, extra lights, strobes, night light pkg. 3-axles air lift 3rd, 4-axles air lift 3rd & 4th, Black....................IN STOCK!
Rogers TAG25XXL, 25 Ton Capacity, Premium Specs, Superior Quality, 235’s Aluminum, 7-Year Warranty, Black or Red Paint, 24’ deck + 6’ tail, 8’ Air Ramps.................. IN STOCK!
Rogers 40 ton Tandem, No-Foot Neck, 24' deck, adjustable width ramps, bucket pocket, 275's, aluminum outers, night lights, work lights, strobes. Rogers Black............ IN STOCK!
Rogers 35 Ton Gentle Riser, 24' deck, adjustable width bi-fold ramps, 275's on Aluminum, Extra lights and strobes, Green and Black Paint................ IN STOCK!
Rogers PT35L, 35 ton Rear Loader, Air Ramps, Air Ride, Air Dump, Low Loading Angle. Storage in sloped neck. 235’s on Aluminum outers, Black Paint................ IN STOCK
In Production for Custom Colors. Rogers Red................ IN STOCK!
ALL WEDO.
EXCELLENCE IN EVERY ATTACHMENT.
At Blue Diamond Attachments, all we do is manufacture attachments that make you better at all you do. From excavators, skid and track loaders to tractors and more, our commitment to quality shines through in every weld and every design. Crafted with precision and innovation, our complete attachment solutions redefine durability and performance. So, whether you’re breaking ground or finishing a project, trust the experts who focus on one thing, and when it comes to your equipment, demand the attachments that excel. Choose Blue Diamond – where all we do is elevate everything you do.
Scan the QR code or go to www.AllWeDoBDA.com to find your nearest dealer. It’s time to take your projects to a whole new level.
H.O. Penn Machinery Talks Cat Rebuilds at Subway Series
Crosstown rivals, the New York Mets and Yankees played on June 26, 2024, through rain delays and thunderstorm warnings, but they were not the only ones bracing the storm with hopes of winning. At Citi Field that night, 100 customers with H.O. Penn Machinery and Cat representatives watched from the stadium, including high-profile New York and Connecticut customers from a variety of industries, including heavy highway, utilities, quarry, waste management and large site excavation. Among those in attendance hailing from Connecticut were city of Stamford, Shawn’s Lawns, Grasso, Dom’s Landscaping, Sweeney Excavating, M. Rondano and Mather Corp.
While the Yankees struggled throughout the evening to gain traction against the Mets, big-league quarry and heavy highway guests of H.O. Penn Machinery learned more about how they could increase the value of their machines for a fraction of the cost.
Highlighting the Cat Certified Rebuild program, attending Caterpillar and H.O. Penn Machinery representatives presented getting machines like-new and forging a second life to existing machines. When it came to the overall reception of the presentation and the benefits it can offer H.O. Penn’s customers, Scott Sayre, product support sales manager, said, “This specific rebuild program boasts over 3,000 new parts in a certified powertrain rebuild, critical engineering updates, and overall product improvements. It is a sensible and economically advantageous approach to managing equipment and creating a second and third life for our customer’s assets. We take extraordinary pride in every rebuild designed specifically for our customer’s application and need.”
for its 450F backhoe loader — a powerful machine about to be restored to its initial glory. It is a first-of-its-kind innovative rebuild, significantly increasing resell value through the H.O. Penn’s Bronx, N.Y., location.
Among the esteemed customers of H.O. Penn at Citi Field were Posillico, Inter Contracting Corp. and many members of municipalities seeking improvements to their machines and in turn, their communities. C.A.C. Industries, also in attendance, is currently undergoing a Cat Certified Rebuild
One Caterpillar representative in attendance, Greg Beek, senior support consultant, said, “Customers can be assured with the Cat Certified Rebuild Program that there is a consistent, high-quality rebuild requiring minimum standards,” he adds, “the offering of options is based on customer needs,
N.J., N.Y. Celebrate Deal to Fully Fund Hudson Tunnel Project
Officials from New Jersey and New York convened in Manhattan July 8 to celebrate a major funding agreement that finalizes a long-awaited cross-Hudson rail project that will double capacity and boost the reliability of the plagued railway.
The Gateway Development Commission (GDC) signed a full funding deal with the Federal Transit Administration (FTA) for $6.88 billion in federal funding for the Hudson Tunnel Project (HTP) and closed on rail rehabilitation monies from the Build America Bureau totaling $4.06 billion to fund the local share of the project.
With these actions, GDC has secured the entire $16 billion commitment needed to complete the Hudson River rail tunnel. That total includes $12 billion from the federal government, the largest funding commitment to a rail transportation project in modern history.
The deal also wraps up a long fight to secure money for the multi-year project.
As a result, the signing ceremony served as a victory lap for the Gateway project’s advocates, who credited President Biden and his administration for the $6.88 billion grant that pushed the railway expansion to the “point of no return.”
“Today marks a significant milestone on the path to ensuring the success of our nation’s most vital infrastructure project,” said New Jersey Gov. Phil Murphy. “Thanks to the leadership of our partners, both in Congress and across the Hudson, our federal government will be covering over 70 percent of the total cost of the Gateway Tunnel Project. As the main artery of our nation’s economy continues to be pushed to its limits, we are now one step closer to transforming the 100-year-old infrastructure under the Hudson River.
“New Jersey thanks the Biden-Harris Administration for delivering this critical investment so that our region’s transportation system will be able to support a new century of American leadership,” he continued.
The massive construction effort is expect-
“Today marks a significant milestone on the path to ensuring the success of our nation’s most vital infrastructure project.”
Phil Murphy New Jersey Governor
going through the Manhattan bulkhead under Hudson River Park, in addition to ordering the first of the tunnel boring equipment.
Later stages of the construction, which include a planned expansion of New York Penn Station, will make possible a four-track railway from Newark Penn Station to Manhattan.
“Please have some patience, this is not going to be overnight,” Murphy said during the July 8 event. “But when it finally hits, it will transform literally millions of lives, and I’m honored to be a part of that.”
ed to stabilize the stretch of troubled tracks. For instance, in recent weeks, NJ Transit commuters have faced repeated hours-long delays after Amtrak-managed railways suffered wiring issues.
“Today is a day of making investments, the biggest investment of taxpayers in a transportation project ever,” noted New Jersey Democratic Sen. Cory Booker. “This is a day of coming back to who we say we are, a nation that invests in itself so we can grow our nation, grow our economy and continue to lead the world.”
Full Construction to Last 16 Years
Construction on one part of the project, the new Portal North Bridge spanning the Hackensack River, started two years ago, and will replace the more than 100-year-old Portal Bridge that is a regular source of delays and congestion. It is slated for partial completion next year, the New Jersey Globe reported.
The HTP will eliminate one of the biggest risks of failure on the Northeast Corridor by building two additional tracks and rehabilitating the existing North River Tunnel, resulting in four modern tracks between New York and New Jersey. The new tunnel will be in service by 2035 and the full rehabilitation of the existing tunnel will be com-
plete by 2038.
Construction of the HTP itself started on both sides of the Hudson River last November. The project is expected to create 95,000 jobs and generate $19.6 billion in economic activity, according to a news release from Murphy’s office.
In the Garden State, the Tonnelle Avenue Bridge and Utility Relocation Project is building a new roadway bridge to allow for a connection to the new tunnel portal and an access point for the tunnel boring machines.
Work also is under way in Manhattan on the Hudson Yards Concrete Casing Section 3 (HYCC-3) Project that will preserve a rail right-of-way to link the new Hudson Tunnel to New York Penn Station.
The new agreement also enables GDC to move forward with heavy construction and tunnel boring activity. Crews will begin working in the coming weeks on the Hudson River Ground Stabilization (HRGS) Project, designed to stabilize the riverbed on the New York side of the Hudson River to enable the massive boring machines to excavate the new tunnel.
By the end of the year, GDC will have awarded contracts for more than $5 billion in construction activity, including contracts to build sections of the tunnel passing through the Palisades in New Jersey and
Tony Coscia, the chair of Amtrak’s Board of Directors and the vice chair of the Gateway Development Commission, said the project will more than double NJ Transit and Amtrak capacity from 450 trains per day to 900.
“The new Hudson River Tunnel will supercharge the rail connections across our region and to the nation, improving and expanding rail service in ways we’ve only been able to dream about in the past,” he said in a news release.
New Jersey, New York Officials to Finally Realize Their Dreams
Memories of former New Jersey Gov. Chris Christie’s cancellation of a prior rail project hung heavy over the recent proceedings as several speakers lauded the expansion but noted that it should have started years ago.
In 2010, Christie controversially pulled New Jersey out of the Access to the Region’s Core project, which started in 2009 and was slated for completion in 2018.
But at the agreement celebration, New Jersey officials thanked themselves, their counterparts from across the Hudson in New York, and President Biden for building the framework of the landmark project.
“The Gateway race was truly a marathon, with its twists, its turns, [and] its bumps,” said New York Democratic Sen. Charles Schumer. “But we laced up, we kept up the pace, and we made it.”
The Gateway Development Commission (GDC) signed a full funding deal with the Federal Transit Administration (FTA) for $6.88 billion in federal funding for the Hudson Tunnel Project (HTP) and closed on rail rehabilitation monies from the Build America Bureau totaling $4.06 billion to fund the local share of the project.
BACKHOES:
EXCAVATORS:
SCREENERS:
2019 NEW HOLLAND B110SPC, 747 HRS, CAB HVAC, QUICK TACH FRONT BKT, EXTENDAHOE, FRONT HYDRAULICS........................................
$88,995
2021 NEW HOLLAND B95C TLB, 139 HRS, CAB, HVAC, 4 IN 1, EXT HOE.... $107,995
CHIPPERS:
2013 BANDIT 1390XP CHIPPER, 15” CAPACITY, 142 HP PERKINS DIESEL ENGINE, 2511 HRS, AUTOFEED, WINCH..........................................$29,995
2017 BANDIT 250XP 12” CHIPPER, CAT 120HP DIESEL ENGINE, 2305 HRS, AUTO FEED, WINCH..........................................................................$41,995
2021 BANDIT SG-75 STUMP GRINDER, 820 HRS, SELF PROPELLED,
REMOTE, NEW CUTTER WHEEL........................................................
$56,995
2005 MORBARK 950 TUB GRINDER, JD 6.8L DIESEL ENGINE, 205HP, 735 HRS, EXTRA TEETH, HAS ALL BOOKS & CO, NEW CONVEYOR & LIFT CYLINDERS, HAS EXTRA SHORT CONVEYOR BELT TO RUN W/O EXTENSION........................................................................................
$84,500 MORBARK 950 TUB GRINDER, 2000 HRS, CAT DIESEL ENGINE, 2 SETS OF SCREENS..................................................................................$97,500 OBO
2019 BANDIT 19XPC, 2169 HRS, 5.7 PSI GM V8 WINCH, AUTO FEED, HYD CHUTE, SINGLE AXLE........................................................................$49,995
TRAILERS:
2000 EAGER BEAVER 10HA, 20,000 LB CAPACITY, AIR BRAKES, GOOD WOOD & BRAKES................................................................................$6,000
2017 HITACHI ZX135-6, 3900 HRS, HYD THUMB, FRONT BLADE, COUPLER, PATTERN CHANGER............................................................
$109,000
2019 KOBELCO SK75SR, 2447 HRS, RUBBER TRACKS....................$72,000
2018 KOBELCO SK85LS, HYD THUMB, CAB, HVAC, 631 HRS..........$82,500
SKID STEER LOADERS:
2021 KUBOTA SVL97-2 TRACK SKID STEER, CAB, HVAC, 905 HRS, STD FLOW HYD, HYD COUPLER, 78” BKT, BACKUP CAMERA................$78,995
2018 VIBROSCREEN SCM40C BOX SCREENER W/CONVEYOR $124,995
2021 VIBROSCREEN SCM40 $79,995
2021 VIBROSCREEN SCM27 $62,995
NEW VIBROSCREEN SCM75C BOX SCREEN W/CONVEYOR, TIER 3 ENGINE $195,000
NEW VIBROSCREEN SCM115T TROMMEL, NO DPF, NO DEF........$179,995
2018 VIBROSCREEN SCM115T TROMMEL, 400 HOURS, NO DPF, NO DEF.. $143,500
TRACTORS:
$39,995
2017 NEW HOLLAND L228, 560 HRS, CAB HVAC, PILOT CONTROLS, HIGH FLOW, 2 SPEED RADIO....................................................................
2012 KUBOTA SVL90-2 TRACK SKID STEER, 1446 HRS, CAB HVAC, HIGH FLOW, LEXAN DOOR, COMES W/BKT, FORKS & AFE ROTARY FORESTRY
HEAD..................................................................................................
$78,995
2018 NEW HOLLAND L228, 2230 HRS, CAB HVAC, 2 SPEED, PILOT CONTROLS, HIGH FLOW, AIR RIDE SEAT................................................$29,995
2008 NEW HOLLAND LS190.B, CAB W/HEAT, FOOT CONTROL, APPROX 2200 HRS (METER SHOWS 395), PRE EMISSION MACHINE..........$29,995
WHEEL LOADERS:
2002 DAEWOO MEGA200V, 2YD 4IN1 BKT, 2283 HRS, HYD COUPLER........
$39,995
2000 NEW HOLLAND LW80, CAB W/HEAT, 10,000 HRS, COUPLER BKT AND FORKS, PERKINS DIESEL ENGINE, WAS NURSERY MACHINE $24,995
2014 NEW HOLLAND BOOMER 24, 4WD, MOD PTO, 60” MOWER DECK HYDRO TRANS, R4 TIRES..................................................................$9,995
ROKBAK MODEL RA30 OFF ROAD TRUCK: 30 TON CAPACITY WITH TAIL GATE, 276HP SCANIA ENGINE. AVAILABLE FOR SALE OR RENT! +N5027............................................CALL FOR PRICE
NEW ASV RS75 WHEEL SKID STEER: OPEN ROPS, SUSPENSION SEAT, 74" BUCKET, 21.3 GPM, ELECTRIC PLUG ON BOOM FOR ATTACHMENTS, MAX CAB, UNIT# N4200......................$59,900
ANACONDA DF410 SCALPING SCREEN: 2 DECK TRACKED SCREENING PLANT WITH LOW HOURS, UNIT# AG1346........................................................................................CALL FOR PRICE
ANACONDA TR75 TRACKED CONVEYOR: 42” X 75’ CONVEYOR, IT ALLOWS FOR STOCKPILING OR FEEDING OF A RANGE OF APPLICATIONS. THE TR75 HAS A VARIABLE SPEED CONVEYOR IN ORDER TO FACILITATE FOR DIFFERENT APPLICATIONS SUCH AS SAND, GRAVEL, AGGREGATES, COMPOST, COAL AND WOOD CHIP. WE STOCK A FULL RANGE OF SPARE PARTS AS A DISPLAY OF OUR COMMITMENT TO PROVIDE A DEDICATED AND RESPONSIVE SERVICE TO ALL OUR CUSTOMERS, 12 CONVEYORS IN STOCK! CALL FOR PRICE
ANACONDA FTR150 UNIT AG1353: MID SIZE FEED LOADER RANGE. FULLY EQUIPPED WITH 50' STOCKPILING CONVEYORALLOWS DFOR STOCKPILING OR FEEDINGA WIDE RANGE OF APPLICATIONS. INCLUDES OPTIONAL 2 DECK VIBRATING GRID..................................$187,000
AMMANN ARX36-2: 51.2" WIDE DRUMS, KUBOTA POWER, EXCELLENT VISIBILITY, EXCELLENT SERVICEABILITY, +N4931..................................................................................................$56,387
ASV MODEL RT50: ALL WEATHER CAB WITH HEAT AND AC, SUSPENSION SEAT, 15” RUBBER TRACKS, 60” BUCKET WITH BOLT ON EDGE, UNIVERSAL SKID STEER COUPLER, YANMAR TURBO DIESEL ENGINE, BLOCK HEATER, ATTACHMENT CONTROL KIT, REAR VIEW CAMERA, APPROXIMATELY 168 HRS, UNIT# 4310............................................................CALL FOR PRICE
SIMEX PLC-24 24" WIDE COLD PLANER WITH REVERSIBLE DISCHARGE CONVEYOR: CUTTS UP TO 7" DEEP, 16 DEGREE TILT, 27-40GPM DISSCHARGE CONVEYOR HELPS LEAVE A CLEANER CUT, WINDROWS MATERIAL BEYOND THE CARRIER FOR EASIER CLEAN UP, UNIT# AT4540......
$25,400
2018 KOBELCO 230SRLC-5: SHORT RADIUS 56,400LB W/31.5" TRACK SHOES, TWO WAY AUXILIARY HYDRAULICS, HYDRAULIC COUPLER EXCELENT CONDITION APPROXIMATELY 1780 HOURS +N3592................................................................................................................
$132,900
2017 OKADA OSC200A CONCRETE PULVERIZER: VERY GOOD CONDITION, LOW HOURS FITS KOBELCO 200 CLASS EXCAVATORS, OR MACHINES WITH 80MM PINS, UNIT# AT3464.... $31,000
44” X 33’ FINE MATERIALS WASHER: IN STOCK & READY FOR IMMEDIATE DELIVERY, UNIT# AG1402....................................................................$94,500
AG1359, ANACONDA J12 JAW CRUSHER: IS AN AGGRESSIVE & POWERFUL MOBILE JAW CRUSHER. WITH THE PROVEN ABILITY OF THE UNIVERSAL CRUSHERS JAW CHAMBER 28" X 44" WITHIN AN INNOVATIVE ANACONDA TRACKED SOLUTION......................................$596,976 SCHIBECI MODEL ST1000 COLD PLANER/SOIL MIXER: 40” MILLING WIDTH, 9” MILLING & MIXING DEPTH. REQUIRES HIGH FLOW MINIMUM 33GPM. THREE LINE SYSTEM W/REMOTE. HYD. SIDE SHIFT & TILT,
BOMAG BW120SL-5: FOLDING ROPS, 47.2” WIDE DRUMS, 5511LBS. OPERATING WEIGHT, KUBOTA 24.8HP DIESEL, FRONT & REAR VIBRATORY, 4320 VPM, .020 IN AMPLITUDE, UNIT# N4538..$49,962
BOMAG BW120AD-5: FOLDING ROPS, 47.2” WIDE DRUMS, 6063LBS. OPERATING WEIGHT, KUBOTA 33HP DIESEL, FRONT & REAR VIBRATORY, 3780 VPM, .020 IN AMPLITUDE, UNIT# N4537....................................$56,000
Skanska JV Lands Contract for East River Tunnel Project
Skanska, a global construction and development firm, and joint venture partner, E-J Electric Installation Co., announced it has been awarded a contract by Amtrak to lead the East River Tunnel Rehabilitation Project in New York.
The forthcoming upgrades will greatly improve safety, reliability and modernize the 2.5-mi.-long tunnels connecting New York Penn Station and Sunnyside Yard.
“We are honored to partner with Amtrak on yet another vital transportation project New York City to rehabilitate the East River Tunnel,” said Michael Viggiano, executive vice president of Skanska’s East Coast Civil operations.
“In collaboration with E-J Electric Installation, we will work to reconstruct and modernize the tunnel infrastructure to achieve the highest measure of quality and safety and improve the travel experience for the thousands of commuters that pass through the tunnel on a daily basis.”
Skanska and joint venture partner E-J Electric Installation Co. has been awarded a contract by Amtrak to lead the East River Tunnel Rehabilitation Project in New York.
The project includes the rehabilitation of Line 1 and Line 2 of the East River Tunnels that were damaged by Superstorm Sandy, with the work on each consisting of the demolition of all tunnel components to the existing concrete tunnel liner, the repair of structural deficiencies of the tunnel concrete liner and reconstruction of the bench walls and duct banks.
The project additionally includes the implementation of new traction power and overhead contact systems, signals, lighting, communication and fire-life safety systems, and replacement of the ballasted track with a direct fixation rail system and drainage system improvements. There will be no
major service impacts to Amtrak, Long Island Rail Road (LIRR) or NJ Transit, all of which rely on this critically important tunnel.
Construction will commence in 2024 and is expected to conclude in 2027.
For more information, visit www.skanska.com.
Landscape Contractors Try Latest Equipment at Equip Expo
Technology is transforming how managed landscapes are cared for.
Equip Exposition, held Oct. 15-18 at the Kentucky Exposition Center, is where the newest outdoor power equipment and most innovative tools for landscape contractors can be explored and tested.
The award-winning and 5th largest trade show in the United States drew more than 27,000 contractors, dealers and manufacturers to the famed Derby City last year and has operated for 41 years.
“Robotic mowers, battery/electric outdoor power equipment, the latest utility type vehicles [UTVs], all terrain vehicles [ATVs], drones, and more will be available to take for a test drive to see if it works for you,” said Kris Kiser, president and CEO of the Outdoor Power Equipment Institute (OPEI), which owns the show.
In the 30-acre Outdoor Demo Yard, attendees can “get their hands dirty” by mowing, mulching, cutting, chopping, digging, driving and more with the latest equipment. Attendees also can go the UTV test track to get behind the wheel and try out the latest four-wheel workhorses.
Attendees can meet and talk with equipment manufacturers designing and producing outdoor power equipment, drones, landscaping software and inter-connected technology products that improve how landscaping contracting businesses are run and sell services.
Inside, attendees also can meet and talk with equipment manufacturers designing and producing outdoor power equipment, drones, landscaping software and inter-connected technology products that improve how landscaping contracting businesses are run and sell services.
Attendees can fly a drone in the Drone Zone in the West
Wing and work toward drone pilot certification while at the show.
The session “Battery Transitions: Incentives, Regulations, and Innovations,” on Thursday, Oct. 17, will showcase perspectives from landscapers, manufacturers and regulators on the latest in technology developments and how they are adapting to advances in the field.
Historically, Equip Expo helps landscape contractors stay in the loop on technology and ahead of their competitors.
“Equip Expo helps us keep up with the latest trends in the industry as it’s changing so much with new technology,” said Antonio Zeppa, co-owner of Zeppa’s Lawn Service.
His company has registered 36 people to attend the trade show this year. Their staff loves attending the show, he said, because they can try new equipment in the Outdoor Demo Yard. They often find new ideas to improve their business.
“There’s tons of stuff we have adopted from the show,” said Zeppa, who added he has purchased new equipment to make working on job sites more efficient and cost-effective for his company’s crews after seeing it at the expo.
“It’s really interesting to be at the forefront of it and not be behind,” said Zeppa.
One of the biggest changes they are making now is adopting more battery/electric equipment. Zeppa said they learned about how to manage this significant transition by attending Equip Expo.
All registrants who book their hotel in advance through Equip’s housing provider are entered to possibly win a free three-night stay during Equip. Learn more and see the sweepstakes’ official rules on the website. Hotels can be booked through Equip’s official housing provider, Louisville Tourism, on the Equip website.
For more information, visit www.EquipExposition.com.
ALEX E. PARIS CONTRACTING
Hamm 3412P, 2012, 84” vibratory padfoot compactor, EROPS w/ heat & A/C, 1,200HMR .
$82,500
Cat 815F, 2006, EROPS cab, 12’4” S-Blade w/ tilt, new paint job, very good condition, 9,400 HMR . .$195,000
Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, ROPS Canopy, (9) Ea. 7.50-15C1 Tires
$15,500
(4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready
From $79,500
Rammax Walk Behind Rollers, over 25 in stock, lever & remote
$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type
$4,000 - $6,500
Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready
$127,500
Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday
$145,000
Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt .$115,000
Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready
$115,000
Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition
$147,500
Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites
$87,500
Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, 10.00R15 tires, 3,400 hrs .
$21,500
Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom anti-two block, GM dsl, clean
185’s, JD diesels
CALL
(12) Allmand Light Plants, 2008-2010, diesel, s/a towtype, (4) MH lights, excellent
Cat 336EL, 2012, 33.5” TBG pads, Q/C, aux hyd, 6,700 HMR, work ready
$162,500
Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites
$89,000
$224,500
Cat 336FL, 2015, 33.5” TBG Pads, Q/C, aux hyd, 4,300 HMR, work ready
Komatsu PC220LC-8 Longreach, 2011, Young Boom/Stick 60’ reach, 3,500 HMR
Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday
$179,000
$122,500
$72,500
Kobelco SK210LC, 2007, Q/C, aux hyd, 31.5” TBG Pads, 3,900 HMR
Cat D5NXL, 2006, 10’ PAT Blade, Paccar PA55 winch, 22” Pads, 4,100 HMR
$82,000
$49,500
Cat 613C Water Wagon, 1994, 5000 gal drop tank, ROPS, spray heads
Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition
Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice CALL
Cat D6NLGP, 2008, VPAT Blade, Drawbar, 33” Pads, 9,900 HMR
$87,500
Cat D6NLGP, 2014, Foldable VPAT Blade, Paccar PA55 winch, 7,200 HMR
$142,500
100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent
$229,500
Komatsu D155AX-6, 2007, Sigma S-U Blade, 4-bbl Single Shank Ripper, 8,400 HMR
Cat D6TXW, 2013, 13’6” VPAT Blade, Carco 70APS winch, 28” pads, 7,300 HMR
2000 Eco Park Blvd.
South Mills, NC 27976
Your family-owned used heavy equipment dealer since 1992
‘11 Cat D6T XL $97,500 Tag# CEG-03-8379, 10,318 hrs, PRICE DROP!
‘15 Hitachi ZX350LC-6N $62,500 Tag # CEG-05-7933, 8,492 hrs, 48” Geith gp bkt, Fleco man thumb
‘12 JD 310 SK $47,500 Tag# CEG-01-8752, 6,131 hrs, 4N1 loader bkt, EROPS ‘15 Cat 329FL LR $159,500 Tag# CEG-05-8484, 4,543 hrs, 60’ LR, 68” smooth edge clean out bkt ‘15 JD 85G $64,500 Tag# CEG-05-8702, 4,378 hrs, Reduced radius, hyd qc & thumb
JD 300D $69,500 Tag# CEG-11-8535, 11,591 hrs, EROPS, cold ac, PRICE DROP
SCA Receives Grant to Reduce Embodied Greenhouse Gases
The Slag Cement Association (SCA) announced that the U.S. Environmental Protection Agency (EPA) has selected SCA to be a recipient of its grant aimed at reducing embodied greenhouse gas emissions for construction materials and products. The grant will support SCA in the shared project of improving the robustness of Environmental Product Declarations (EPD) in the cement industry.
The project will be led by the Portland Cement Association (PCA) in partnership with the American Coal Ash Association (ACAA), Natural Pozzolan Association (NPA), and SCA. One of the goals of the project is to significantly boost the number of facility-specific EPDs — including those for slag cement producers.
“We are thrilled to be partnering with PCA, ACAA and NPA in producing more expansive EPDs for cementitious materials”, said Nick Brimley, marketing director of SCA. “The EPA’s funding will provide the
opportunity for SCA to show the sustainability benefits of utilizing slag cement as one of the strongest carbon reduction tools for the cement and concrete industry.”
Along with providing facility-specific EPDs, SCA plans on enhancing its industrywide Slag Cement EPD, Slag Cement Product Category Rule (PCR) and Life Cycle Assessment Calculator.
The project is one of more than 30 grants the EPA announced to support the development and verification of EPDs for construction materials and products. (Logo courtesy of Slag Cement Association.)
Monroe Tractor Welcomes John Wilber as Branch Manager of Syracuse Location
John Wilber has joined Monroe Tractor’s Syracuse, N.Y., location as branch manager.
Although he is new to the construction industry, Wilber brings extensive management and customer service skills. His previous role in corporate management and having owned his own franchise makes him a great choice for leading employees and supporting customers, according to the company.
Wilber looks forward to building strong customer and employee relationships while delivering industryleading customer service and being the true business partner of choice to Monroe Tractor’s Syracuse customers.
“I will continue the high standards that have set Monroe Tractor apart for the last 73 years and carry on the motto, we keep you working,” he said.
“We are excited John has joined our Syracuse team. His expertise in customer service, management skills and understanding of urgency will be a great asset to our team,” said Greg Downing, director of operations.
Contractors Association of West Virginia Elects 2024 Officers; Names New President
James W. “Tripp” Dailey III, president of W. Harley Miller Contractors Inc., Martinsburg, W.Va., has been elected president of the Contractors Association of West Virginia (CAWV). He replaces Tim Spradling, president of Benchmark Construction Company Inc., Hurricane, W.Va., who will serve on the board of directors as immediate past president.
Serving with Dailey as officers for the coming year are:
• Mark Urso, president of Bear Contracting LLC, Bridgeport, W.Va., was elected senior vice president;
• Shannon Hapuarachy, vice president of SMH Construction Company Inc., Beckley, W.Va., was elected vice president;
• Derick Foster, president of Paramount Builders LLC, St. Albans, W.Va., was elected treasurer; and
Contractors Association of West Virginia photo 2024-25 President James W. “Tripp” Dailey with wife, Nikki, at the CAWV Annual Meeting held July 11-14 at The Greenbrier Resort.
• James Scott Pierson, project manager of Triton Construction Inc., St. Albans, W.Va., was elected secretary.
Courtney Persinger, president of Persinger & Associates Inc., Charleston, W.Va.; Jason Kitzmiller, president of ALL Construction Inc., Mt. Storm, W.Va.; and Brandon Duriez,
Kevin Chodkowski Joins Baschmann Services as Sales Representative
vice president of Snyder Environmental Services, Kearneysville, W.Va., were elected as members of the board of directors.
In addition, CAWV elected chairs of the four occupational divisions.
• Building Division Chairman: Matthew Bourne, vice president of March-Westin Company Inc., Morgantown, W.Va.;
• Highway/Heavy Division Chairman: Ryan Cocco, regional manager of Kokosing Construction Company Inc., Westerville, Ohio;
• Utilities Division Chairman: Rob LaFon, president of Famco Inc., Huntington, W.Va.;
• Associate Division Chair: Brant Moorhead, principal at The Rodeheaver Group P.C., Morgantown, W.Va.; and
• Associate Division Vice Chair: Marc Magro, vice president of Sales, Limestone and Asphalt Divisions at Greer Industries Inc., Morgantown, W.Va.
CAWV represents more than 500 businesses in the highway, utility and building contracting industry throughout West Virginia.
Kevin Chodkowski
Baschmann Services, in Elma, N.Y., announced that Kevin Chodkowski has joined its staff in the position of sales representative in northern Erie and Niagara counties of New York.
In his role, Chodkowski will be contacting contractors, municipalities and aggregate producers offering the following brands sold through Baschmann Services:
• Kobelco
• Hitachi
• ASV
• Anaconda
• Carlton
• Fecon
• TCI Manufacturing
• Perkins engines
• McLanahan
• Felling trailers
Previous to joining Baschmann Services, Chodkowski served as a manufacturer’s representative for a roofing and siding products wholesaler.
“In my previous job function I put a heavy emphasis on building one-on-one customer relationships,” said Chodkowski. “Those relationships were critical to growing my customer base. It is evident to me that Baschmann Services and their entire staff share the same philosophy of the customer coming first.”
For more information, visit www.baschmann.com. Baschmann Services photo
Scale Models for Sale
Realistic Scale Models of
Cole Landscaping Embraces Technology, Communication
Cole Landscaping is a large residential and commercial landscaping firm headquartered in Rowley, Mass., which serves the north shore region. The projects that it tackles for residential customers include property management; lawn care; plant health care; landscape design; hardscapes; outdoor kitchens; pool and water features; and irrigation.
For commercial customers it is primarily called upon to do landscape design and build; property maintenance; irrigation; and snow removal.
“We look at each customer as a lifelong commitment and relationship,” said Greg Cole, president of Cole Landscaping. “Our goal is to improve our customers’ quality of life as well as the value of their property. We help customers consider every detail of each project with the goal being not only to increase the value of their property, but to also make sure it can be easily maintained.”
Cole Landscaping has embraced technology and the company believes in taking advantage of any new products that can improve its customer service.
“From scheduling customers to managing our fleet using GPS, we rely on technology to be more efficient,” Cole said. “We do our landscape design using the latest software with 3-D models, which provide a realistic view of our proposed project. Our back office uses landscape specific management platforms that allow us to look at any project in real time as needed. We use a software called Aspire that tracks all key customer interactions and then integrates with Google tools and Outlook to help us manage tasks, appointments and e-mail correspondence. We are finding these technology tools to be critical to our future growth and the key to managing customer communication.
“We work closely with industry-related associations whom we find to be critical to staying on top of industry trends,” he added. “Beyond the relationship with associations, we maintain our competitive edge by attending seminars and trade shows across the country. We are constantly adapting new strategies and solutions to continue to grow and provide our clients with the service they deserve.”
According to Cole, the focus of his company’s 30year history has been servicing customers on the north shore and becoming experts on the various conditions and circumstances unique to each area.
“We pride ourselves on keeping open and continuous communication with each customer during the entirety of their project,” he said. “We pride ourselves on having same-day response to any questions or concerns a client may have and we are absolutely dedicated to sticking to the agreed upon time frame and budget.”
Employee training also is critical to being able to achieve its goals, along with meeting customers’ expectations.
“Our entire staff meets every week for a team meeting,” Cole said. “Part of each meeting is dedicated to safety and the balance to operational training, such as how to properly trim a hedge or how to
operate a skid steer. Safety is of the utmost concern to us. Our employees are family, and we want them to come home every day in the same condition that they left.”
Between the company’s longevity, product knowledge and the dedication of its employees, Cole Landscaping has
opportunities to get involved in many unique projects, including a recent pool project in Marblehead where the pool was being installed on a hillside with a 30-degree grade that had to be maintained.
The future is bright for Cole Landscaping. It has projected that by the end of the decade it will have 160 employees and it is currently looking to invest in a second facility to reduce windshield time.
Cole is quick to point out that his employees at times are only as good as the equipment they have access to complete a project. With that in mind, Cole Landscaping has made significant investments in its equipment fleet. The company has purchased six Toro Dingo TX track loaders with vertical lift loader arms, which gives each Dingo a 1,000-lb. capacity for loading and unloading. The vertical lift makes the machine very flexible and able to use attachments such as augers and vibratory hammers.
SECTIONPaving
Cat Debuts VisionLink for PM600, PM800 Series Cold Planers
An online web platform, VisionLink Productivity for cold planers delivers near real-time machine and jobsite data designed to improve the contractor’s productivity.
Available for Cat PM620, PM622, PM820, PM822 and PM825 cold planers, VisionLink Productivity gathers, analyzes and summarizes detailed data such as time spent waiting for trucks, cutting and travel at the jobsite as well as distance cut, fuel burn, location and cycle mapping.
This gives contractors insights into jobsite productivity and equipment utilization.
VisionLink Productivity segments data into easy-to-navigate dashboards, providing multiple ways to view more detailed data and key product indicators (KPIs). Contractors can quickly track the hours and distance milled each day and visualize excess travel, slow milling speeds and stoppage.
Eliminating manual data gathering, detailed reports are available in PDF, Excel and CVS formats and can be scheduled for email inbox delivery.
This powerful reporting technology enables contractors to measure performance of cycle segments; track and eliminate unnecessary fuel consumption; and compare operations between shifts, machines and projects. Allowing for the identification and reduction of unnecessary waiting, companies can achieve longer, more productive milling cycles, improve estimating for future projects, and
optimize profitability by increasing efficiency and reducing costs, according to the manufacturer.
A cloud-based platform, VisionLink Productivity gathers and summarizes machine telematics and jobsite data from all equipment at the job site, regardless of the brand, and can be accessed anywhere via a mobile, tablet or desktop device. Fleets with mixed OEM equipment brands can all be incorporated into VisionLink Productivity.
For more information, visit www.cat.com.
UPCOMING SPECIALSECTIONS
ISSUE 18 Utility Construction
AdClosingDate August15,2024
PublishingDate August28,2024
ISSUE 20 Off-Road Trucks
AdClosingDate September12,2024
PublishingDate September25,2024
ISSUE 22 Crawler Loaders, Dozers
AdClosingDate October10,2024
PublishingDate October23,2024
ISSUE 24 Trailers
AdClosingDate November7,2024
PublishingDate November20,2024
ISSUE 26 Compact Equipment
AdClosingDate December5,2024
PublishingDate December18,2024
BUILT TO CONNECT
39 Jersey Street West Babylon, NY 11704
631/643-2605 www.allislandequipment.com
JESCO, Inc.
1275 Bloomfield Ave. Fairfield, NJ 07004
973/227-2221
800/321-8080
118 St. Nicholas Ave. S. Plainfield, NJ 07080
908/753-8080
800/241-7070
www.jesco.us
1790 Route 38 Lumberton, NJ 08048
609/267-2020
www.jesco.us
1401 Hookset Rd. Hooksett, NH 03106
603/644-8787 ambroseequipment.com
1440 Route 9W Marlboro, NY 12542 845/236-3000 www.hoffmanequip.com
2350 Greystone Ct. Rockville, VA 23146
804/359-4048 www.richmondmachinery.com
1001 Lehigh Station Road Henrietta, NY 14467
585/334-3867 5035 Genesee Street Buffalo, NY 14225 716/681-7100 monroetractor.com
30 Barnes Ind. Pk. Rd. Wallingford, CT 06492 203/265-6781
17 Eagle Road Danbury, CT 06810 203/775-1203
80 Pratt Rd. Plainfield, CT 06374
860/546-4808 www.wiclark.com
Harrisburg, PA 7201 Paxton Street Harrisburg, PA 17111 800/325-6455
Wilkes-Barre, PA 600 Sathers Drive Pittston, PA 18640 866/667-6756
Butler, PA 796 Unionville Road Prospect, PA 16052 724/865-9221
Philadelphia, PA
135 Lincoln Avenue Prospect Park, PA 19076 800/220-4033
Pittsburgh, PA 8181 Noblestown Road McDonald, PA 15057 800/692-7600
Ebensburg, PA 2350 Munster Road Lilly, PA 15946 814/886-5191
Albany, NY
3 Industry Drive Waterford, NY 12188 518/357-2200
Syracuse, NY
6018 Drott Drive East Syracuse, NY 13057 800/368-6455
www.stephensonequipment.com
8192 Euclid Court Manassas Park, VA 20111 703/330-5579
20332 Leitersburg Pike Hagerstown, MD 21742 301/733-7414
1109 Middle River Rd Middle River, MD 21220 800/633-5077 valleysupplyequipment.com
FAYAT Acquires Controlling Interest in Asphalt Drum Mixers
FAYAT has acquired a controlling interest in Asphalt Drum Mixers LLC (ADM), based in Huntertown, Ind., which manufactures asphalt plants and components for contractors and asphalt producers worldwide.
Through the acquisition of ADM, FAYAT further strengthens its strategic position in the road construction and maintenance equipment segment.
ADM is joining the FAYAT Mixing Plants business unit, which includes the brands ERMONT, a worldwide leader in continuous mixing plants, and MARINI a worldwide leader in batch mixing plants. The acquisition of ADM allows FAYAT to expand its strategic position in North America, by leveraging synergies with the following brands already present in the asphalt business: BOMAG, DYNAPAC and SECMAIR.
Being a family-owned business with decades of experience in the road construction and maintenance equipment business, the FAYAT Group will provide ADM with the backing to be a growing and long-term dependable partner for its customers, the company said.
Moreover, to ensure continuity and an effective transition, the Boyd-Devine family will remain as a minority owner and Mike Devine remains as president of ADM, a position he has served since 2004.
Under the FAYAT umbrella of companies, ADM will operate as an autonomous manu-
facturer continuing to market its products under the brand ADM. ADM also will continue to provide its customers with long-lasting solutions to meet the custom requirements of every job, from planning to production to service after the sale.
In the development of future technologies, ADM will collaborate with other companies within the FAYAT Group to offer customers the best solutions for tomorrow’s challenges.
“This acquisition is a great opportunity for the FAYAT Group and its customers, as ADM is a key player in the road construction equipment market in North America, with a highly recognized brand,” said Jean-Claude Fayat, president of the FAYAT Group.
“ADM has an excellent strategic place in our group, and we plan to grow and expand its presence and product offering. We will leverage its expertise and technologies together with our existing portfolio to continuously develop equipment that closely addresses our customers’ needs.”
“We are very happy to join the FAYAT family and have already seen many opportunities to grow ADM and to offer more and better solutions to our customers,” said Mike Devine, president of ADM. “We look forward to a long-lasting partnership with the FAYAT Group.”
For more information, visit https://fayat.com/en and www.admasphaltplants.com.
Women of Asphalt Launches Scholarship Program in Conjunction With Caterpillar
Women of Asphalt (WofA) announced the launch of a new scholarship program in partnership with Caterpillar Inc., aimed at empowering women in the asphalt industry.
This initiative aligns with WofA’s mission to increase awareness of career opportunities, elevate knowledge through education and research, and provide a supportive community for women in the asphalt industry.
About the Scholarship
The Women of Asphalt Scholarship Program offers recipients the unique opportunity to attend the Caterpillar Paving Operations Training, scheduled for the week of Nov. 18, 2024. This comprehensive training program is designed to enhance participants’ skills and knowledge in paving operations, providing them with valuable insights and hands-on experience.
actively engaged in furthering their skills and knowledge in this field.
Eligibility, Application Process
To be eligible for the scholarship, applicants must meet one of the following criteria:
• Currently employed in the asphalt industry
• Seeking employment in the asphalt industry
• Actively engaged in furthering their skills and knowledge in the asphalt industry
The application process requires detailed information about the applicant’s background, including employment history, education status and participation in relevant clubs or organizations. Applicants also must submit an essay explaining why they are a good candidate for the award, highlighting their career aspirations and any relevant experiences.
LESLIE EQUIPMENT COMPANY www.lec1.com
6248 Webster Road Cowen, WV 26206 304/226-3299
2098 Lillian Lane Pleasant Valley, WV 26554 304/534-5454
19 Goff Crossing Drive Cross Lanes, WV 25313 304/204-1818
80 John Deere Lane Norton, WV 26285 304/636-6421
136 Clifftop Drive Beaver, WV 25813-1525 304/255-1525
MONROE TRACTOR
www.monroetractor.com
1001 Lehigh Station Road Henrietta, NY 14467 585/334-3867
5035 Genesee Street Buffalo, NY 14225 716/681-7100
The scholarship covers the full cost of the weeklong course and includes travel expenses up to $2,000, with the total value of the scholarship exceeding $6,000. This is an excellent opportunity for women who are currently employed in the asphalt industry, seeking employment, or
All applications must be submitted by Aug. 1, 2024. The Women of Asphalt Awareness Committee will review all applications and announce the award winners via email.
(Logo courtesy of Women of Asphalt.)
Kasi Infrared Introduces Its New Patriot Patching System to Help Restore Asphalt
Kasi Infrared, a pioneer in innovative asphalt restoration solutions, presented the Patriot Infrared System at World of Asphalt 2024.
This truck-mounted, self-contained infrared restoration system is poised to transform the way asphalt repairs are performed, offering unmatched efficiency, convenience and sustainability, the manufacturer said.
The Kasi Patriot integrates multiple functions onto a single chassis, streamlining the asphalt restoration process. Featuring a 48 sq. ft. infrared pavement heater, a 3 or 5-ton capacity asphalt reclaimer, ample tool storage, compactor compartment and a dumping waste bin, the Patriot provides a comprehensive solution for asphalt restoration needs.
Hydraulic controls ensure ease of operation, empowering a two-person crew to execute top-quality asphalt restorations with precision and efficiency.
“At Kasi Infrared, we are committed to pushing the boundaries of asphalt
restoration technology,” said Daniel Martin, marketing manager at Kasi Infrared. “The Patriot Infrared System represents the culmination of our dedication to innovation, design excellence and superior workmanship. By integrating advanced features and functionality, the Patriot delivers unparalleled performance, durability, and ease of use.”
The Infrared Process employed by
the Patriot System offers numerous advantages over conventional repair methods. With repair times as short as 25 minutes, minimal disruption to traffic is ensured, enhancing safety and efficiency on roadways. Additionally, the Patriot’s all-in-one design reduces the need for multiple pieces of equipment, streamlining operations and saving valuable resources. Its ability to prevent cold joints ensures long-lasting repairs that resist future deterioration, while its environmentally friendly approach recycles existing asphalt and minimizes waste, contributing to sustainability efforts, according to the manufacturer.
“By choosing the Kasi Patriot, road maintenance professionals can enjoy faster repair times, reduced equipment requirements, lower material consumption, decreased manpower needs and a more environmentally friendly approach to asphalt restoration,” added Martin.
For more information, visit www.kasiinfrared.com.
7300 Eastman Road N. Syracuse, NY 13212 315/452-0000
8194 State Route 415 Campbell, NY 14821 607/739-8741
6 Equipment Drive Binghamton, NY 13904 607/754-6570
GROFF TRACTOR & EQUIPMENT
www.grofftractor.com
800-33-GROFF 800-33-(47633)
6779 Carlisle Pike Mechanicsburg, PA 17050
20 Stauffer Lane Ephrata, PA 17522
210 Rolling Ridge Drive Bellefonte, PA 16823
100 Smith Drive Cranberry Twp, PA 16066
963 South Center Ave New Stanton, PA 15672 4355 Admiral Peary Highway Ebensburg, PA 15931
UNITED CONSTRUCTION & FORESTRY
www.unitedequip.com
80 Southbridge Rd. • Route 20 North Oxford, MA 01537 508/987-8786
2397 GAR Highway • Rte 6 & 136 North Swansea, MA 02777 508/379-9810
88 Camelot Drive • Unit 42 Plymouth, MA 02360 508/830-9997
1620 Page Blvd Springfield, MA 01104 413/543-5595
4 Sterling Road North Billerica, MA 01862 978/667-4345
34 Page Road West Hermon, ME 04401 207/947-6786
106 North Street Houlton, ME 04730
207/532-6517
1505 Caribou Road New Canada, ME 04743 207/834-6701
396 County Road Westbrook, ME 04092 207/773-3777
98 Sheep Davis Road Pembroke, NH 03275 603/225-2769
300 Clinton Street Springfield, VT 05156 802/885-6840
Hunker, PA 724-861-6080 Eighty Four, PA 724-325-9297 miltoncat.com Milford, MA 508-634-3400 North Reading, MA 978-276-2400 Wareham, MA 508-291-1200 Cranston, RI 401-946-6350
Poughkeepsie, NY 845-452-1200 Bronx, NY 718-863-3800 Bloomingburg, NY 845-733-6400
Holtsville, NY 631-758-7500
Newington, CT 860-666-8401
Piscataway, NJ 732-885-5555 Hammonton, NJ 609-561-0308 Bensalem, PA 215-639-4300 Whitehall, PA 610-261-4887 Bear, DE 302-328-4131 hopenn.com
Dynapac Wrapped D30W Shines Light On Suicide in Industry
The construction industry, while often celebrated for its resilience and productivity, faces a silent crisis that demands urgent attention: suicide among its workforce. It’s crucial to shine a light on this pressing issue and mobilize efforts to support those in need within the construction sector.
“Supporting suicide prevention efforts in the construction industry isn’t just about saving lives; it’s about recognizing the inherent dignity and value of every individual within our workforce,” said Jamie Roush, president and general manager of Dynapac.
“By fostering a customer of empathy, support, and understanding, we not only protect the mental health and well-being of our workers but also strengthen the foundation upon which our industry thrives.”
At World of Asphalt, Dynapac addressed the silent crisis and shined a light on suicide in the construction industry
way paver, bringing awareness to the support systems for construction workers navigating mental health challenges.
Dynapac has a longstanding relationship with Dr. Vince Hafeli, signing the Suicide in Construction Awareness Proclamation at the Florida Transportation Builders’ Association on Feb. 7, 2023. Since then, Hafeli has spoken at Dynapac company events, and when presented with the idea of
a special wrapped machine, both parties were all in.
At this World of Asphalt, Dynapac addressed the silent crisis and shined a light on suicide in the construction industry with a D30W highway paver, bringing awareness to the support systems for construction workers navigating mental health chal-
The Worldwide Leader in Concrete Paving Technology
lenges. Dynapac also raised funds for the cause with an interactive experience that will allow attendees to take the #NotToday pledge by having their photo taken by the display.
“As we unite in solidarity, let us reaffirm our commitment to prioritizing mental health, breaking down barriers to care, and
ensuring that no construction worker suffers in silence. Together, we can build a brighter and healthier future for all those who contribute to the fabric of our communities,” the company said.
If you or someone you know is struggling or in a crisis, help is available. Call or text 988 or chat 988lifeline.org.
ALL ISLAND EQUIPMENT
39 Jersey Street West Babylon, NY 11704
631/643-2605
allislandequipment.com
AMBROSE EQUIPMENT / ALTA EQUIPMENT
1401 Hooksett Rd. Hooksett, NH 03106
603/644-8787
ambroseequipment.com
HOFFMAN EQUIPMENT COMPANY
1440 Route 9W
Marlboro, NY 12542
845/236-3000
www.hoffmanequip.com
JESCO, Inc.
1275 Bloomfield Ave. Fairfield, NJ 07004
973/227-2221
800/321-8080
118 St. Nicholas Ave. S. Plainfield, NJ 07080
908/753-8080
800/241-7070
1790 Route 38
Lumberton, NJ 08048
609/267-2020 www.jesco.us
MONROE TRACTOR
1001 Lehigh Station Rd. Henrietta, NY 14467
585/334-3867
5035 Genesee Street Buffalo, NY 14225
716/681-7100
www.monroetractor.com
RICHMOND MACHINERY
2350 Greystone Ct. Rockville, VA 23146
804/359-4048
www.richmondmachinery.com
W.I. CLARK COMPANY
30 Barnes Ind. Pk. Rd. Wallingford, CT 06492
203/265-6781 17 Eagle Road Danbury, CT 06810
203/775-1203
80 Pratt Rd. Plainfield, CT 06374
860/546-4808
www.wiclark.com
STEPHENSON EQUIPMENT, INC.
Harrisburg, PA 7201 Paxton Street Harrisburg, PA 17111
800/325-6455
Wilkes-Barre, PA
600 Sathers Drive Pittston, PA 18640 866/667-6756
Butler, PA
796 Unionville Road Prospect, PA 16052
724/865-9221
Philadelphia, PA
135 Lincoln Avenue Prospect Park, PA 19076
800/220-4033
Pittsburgh, PA 8181 Noblestown Road McDonald, PA 15057
800/692-7600
Ebensburg, PA
2350 Munster Road Lilly, PA 15946 814/886-5191
Albany, NY
3 Industry Drive Waterford, NY 12188 518/357-2200
Syracuse, NY
6018 Drott Drive East Syracuse, NY 13057
800/368-6455
www.stephensonequipment.com
Valley Supply & Equipment Co., Inc.
8192 Euclid Court Manassas Park, VA 20111
703/330-5579 20332 Leitersburg Pike Hagerstown, MD 21742
301/733-7414
1109 Middle River Rd Middle River, MD 21220
800/633-5077
valleysupplyequipment.com
r No for ctedPerfe
caAmeri th r e p x E f o deliveringthe -our machines are ing and milling, ground, in every NSTRUCTION smartsafeandsu to paving, compac climate, condition, , th TECHNOLOGY AS THE GLOBAL L stainableconsistently ction and rehabilitation and terrain. From min e world is our proving EADER IN ROAD CO highest quality and lowest total cost of ownership.
smart, safe, and sustainable, consistently delivering the
A Workhorse To Depend On
High Performance, Quality Results
The CP100II sets the standard for versatility, component lifecycle and mat quality. With a powerful 100 horsepower engine, an array of configurations and the class-leading Carlson EZCSS single slide screed, it’s easy to see why the CP100II is the ideal choice for heavy-duty commercial paving.
The Carlson CP100 II sets the standard for versatility, component lifecycle and mat quality. With a powerful 100hp engine, an array of configurations and the class-leading EZCSS single slide screed, it’s time to see why the CP100 II has fast become the contractor’s choice for heavy-duty commercial paver platforms.
BARRY EQUIPMENT www.barryequipment.com
30 Birch Island Road Webster, MA 01570 508-949-0005
TRACEY ROAD EQUIPMENT
www.traceyroad.com
Albany, NY
518-438-1100
866-740-8853
Kirkwood, NY
607-775-5010
800-370-9488
Queensbury, NY 518-793-9688
833-817-2917
HOFFMAN EQUIPMENT
Henrietta, NY 585-334-5120 866-950-6210
Utica, NY 315-765-8746 800-872-2390 Adams Center, NY 315-788-0200 888-335-0200
7 Harrys Way Webster, MA 01570 508-949-0005 Wilkes-Barre Township, PA 570-410-2123 • 800-872-2390
www.hoffmanequip.com
1440 Route 9W Marlboro, NY 12542 845-236-3000
22 Peconic Ave. Medford, NY 11763 631-207-2900
1144 Zerega Ave. Bronx, NY 10462 718-822-1180
GT MID ATLANTIC
www.GTMidAtlantic.com
1545 Hook Rd. Folcroft, PA 19032
610-586-2710
Vineland, NJ
856-697-1414 Totowa, NJ 973-785-4900
Freehold, NJ 732-780-4600
CATERPILLAR
JCB
JOHN DEERE
HL=Heavy-Lift
KUBOTA
NEW HOLLAND
Harrisburg, PA 7201 Paxton St. Harrisburg, PA 17111
800/325-6455
Philadelphia, PA 135 Lincoln Ave. Prospect Park, PA 19076
800/220-4033
Pittsburgh, PA
8181 Noblestown Road McDonald, PA 15057 800/692-7600
Wilkes-Barre, PA 137 Armstrong Rd. Pittston, PA 18640
866/667-6756
Butler, PA 796 Unionville Rd. Prospect, PA 16052
724/865-9221
Ebensburg, PA 2350 Munster Rd. Lilly, PA 15946 814/886-5191
www.stephensonequipmentjcb.com
New Jersey
Corporate Headquarters 300 S Randolphville Road Piscataway, NJ 08854 732/752-3600
South Jersey 1330 Hurffville Road Deptford, NJ 08096 856/227-6400
New York New York City 1144 Zerega Ave. Bronx, NY 10462 718/822-1180
Mid-Hudson Valley 1440 Route 9W Marlboro, NY 12542
845/236-3000
Long Island 22 Peconic Ave. Medford, NY 11763 631/207-2900
105 North Wedge Street Bridgeport, WV 26330
304/973-9019
Northeast Ohio
8155 Roll & Hold Parkway Macedonia, OH 44056
330/468-4900
www.burnsjcb.com
Construction Boom Leads to Evolution of Backhoe Loader
By Katherine Petrik CEG EDITORIAL ASSISTANT
The backhoe loader is one of the most common pieces of construction equipment. In essence, it is a tractor-like vehicle with a bucket mounted on one side and a small, hydraulic digger (backhoe) on the opposing side. The arm is connected to a boom and secured with a king post, which allows the boom to pivot 180 to 200 degrees.
Its versatility enables it to perform many tasks in almost any terrain. The backhoe loader is commonly used on projects to dig trenches for cable lines, pipes and utility lines. Other uses include demolition of small structures, landscaping, digging holes, breaking asphalt and transporting some construction materials.
In 1835, the steam-powered dipper shovel was created and used to dig through hard soil and rocks in mines. It would then load the excavated material onto railroad cars. Since the dipper shovel was rail-mounted, it was able to be moved easily from location to location. It had a short boom with a shovel and a bucket, used for digging.
Over time, modifications were made and tires or tracks were added to suit whatever job the dipper shovel was needed for. As the invention of gasoline-powered engines became mainstream, the dipper shovel was modified even further.
The modern backhoe loader has a similar history in both the United States and the United Kingdom. In 1945, following World War II, construction projects skyrocketed in both countries. It was common for builders to use tractors with various attachments, but with the housing boom, there was a call for equipment to be made more efficient and able to accommodate the types of attachments needed for the job.
In 1947, the first all-hydraulic backhoe swing frame was developed by Vaino J. Holopainen and Roy Handy of the Wain-Roy corporation of Hubbardston, Mass. The swing frame allowed the digging arm to swing to the side and dump
drc.ohiolink.edu/ photo
In 1835, the steam-powered dipper shovel was created and used to dig through hard soil and rocks in mines.
the contents of the bucket. It was mounted to a Ford model 8N tractor. In 1948, the first units were sold to the Connecticut Light and Power Company for $705. Wain-Roy sold approximately 7,000 units between 1948 and 1957, mostly through Ford dealers.
Joseph Cyril Bamford started his business — J.C. Bamford Ltd. — in 1945 in Uttoxeter, Staffordshire, England. JCB Inc., as it is known today, began by creating two, then four-wheel trailers. In 1948, he created a hydraulic front loader, designed to bolt to a Fordson “Major” tractor, thus creating the Major loader.
By 1953, JCB launched what the world now knows as the backhoe loader by fitting both the hydraulic backhoe and the loader
see BACKHOE page 62
cn-wood.com
CONNECTICUT
Newington: 860-665-7470
New Haven: 203-848-6735
MASSACHUSETTS
Avon: 508-584-8484, Whately: 413-665-7009
Woburn: 781-935-1919
NEW YORK
Holmes: 845-878-4004
RHODE ISLAND
Smithfield: 401-942-9191
hwyequip.com
Delmont: 412-775-0051 finkeequipment.com NEW
hwyequip.com/keystonecme PENNSYLVANIA
Selkirk: 518-767-9331
VERMONT finkevt.com
Colchester (Burlington): 802-316-3805
Ebensburg: 814-472-4441
Martinsburg: 814-793-3734
St. Mary’s: 814-781-1365
Drums: 570-788-1127
Ephrata: 717-859-3132
Harrisburg: 717-564-3031
Lock Haven: 570-769-1070
hoffmanequip.com
NEW
Deptford: 856-227-6400
Piscataway: 732-752-3600
NEW
Bronx: 718-822-1180
Marlboro: 845-236-3000
Medford: 631-207-2900
PENNSYLVANIA
Lionville: 610-363-9200
monroetractor.com
NEW
Binghamton: 607-754-6570
Buffalo: 716-681-7100
Campbell: 607-739-8741
Henrietta: 585-334-3867
N. Syracuse: 315-452-0000
Post-WWII Construction Projects Give Rise to Backhoes
to the same tractor. Due to its popularity, the machine is still known as a “JCB” in the United Kingdom and Ireland.
Wain-Roy created the first reversible seat and then in 1954, filed a patent for the first individually-controlled outriggers. The outriggers are used to stabilize the machine and keep the weight balanced so it does not tip over. In 1957, Elton Long, an engineer at Case Construction Equipment, was given the task to develop an integrated loader/backhoe following the company’s acquisition of American Tractor Corporation. By early spring, Case introduced the first machine made and warranted by one company.
Also in 1957, JCB launched the first dedicated backhoe loader, with both the loader and the backhoe permanently attached to the chassis. This makes the machine more stable, rather than simply being attachments for tractors. This model, known as the Hydra-Digga, also provided a comfortable cab for the operator. Case improved upon its design by introducing the first diesel-powered loader/backhoe in 1959, and in 1963, the 530 Construction King was available with power loader linkage and two-cylinder, double-acting swing system with hydraulic cushion.
An American company — Hy-Dynamic — brought the Dynahoe Model A to market in 1959. This machine was the second purpose-built backhoe loader and was intended for heavy excavation jobs. It offered a 14,000 lb. (6,350 kg) operating weight; 14 ft. (4.3 m) dig depth; and was powered by a 65 hp Continental flat-head “Red Seal” 6-cylinder gas engine. In 1961, the Dynahoe was available with a Diesel 353 engine and by 1964 the gasoline engine was phased out entirely.
In the 1960s, the first JCB unit was introduced to the American market. The JCB 4C was a powerful machine with the capability of digging through rock. In 1966, the company launched the larger, heavier 3D backhoe loader. This piece was able to rotate 360 degrees.
Case also made continuing improvements, including buckets up to 38 in. (96.5 cm); self-leveling buckets; and an improved swing mechanism. In 1967, the company intro-
JCB photo
JCB’s ‘Dancing Diggers’ perform all over the world.
duced the first extendible boom, allowing the backhoe to have greater reach. In the ensuing decades, various companies have used the latest technology to upgrade backhoe loaders. Today’s machines are built for efficiency and incorporate a wide selection of standard and optional features including more efficient engines; power steering; heated/air conditioned cabs with noise control; vibration control; computerized controls; and ergonomic seating.
Backhoe loaders come in many different sizes, including compact models for jobs requiring work in a tighter space.
Attachments add to the productivity of the machine and
are easily mounted using a quick coupler (quick-attach) mounting system. The variety of attachments include different size buckets; rakes; pallet forks; hydraulic hammers; shovels, snow plows; stump grinders; and grapples. (Sources for this article include: https://en.wikipedia.org/wiki/Backhoe_loader; https://en.wikipedia.org/wiki/Backhoe; http://www.madehow.com/Volume-6/Backhoe.html; https://everythingbackhoes.wordpress.com/history-of-backhoes/; http://jcbna.com/; and http://www.colemanequip.com/CaseBackhoeHistory.asp.)
FATAL FALLS HIGHEST IN CONSTRUCTION
The hard-hitting MAX-Series™ VT-100 gives you the tools to impr The vertical-lift machine excels in loading and grading applications
Loader VT--100
T r ove productivity while working comfortably. in landscaping and construction.
DISCOVER THE ASV LINE-UP OF TRA
Highway Equipment & Supply Co. www.hwyequip.com
15 Honey Hole Road Drums, PA 18222 570-788-1127
4500 Paxton Street Harrisburg, PA 17111 717-564-3031
122 Fritz Road Lock Haven, PA 17745 570-769-1070
200 Burkholder Drive Ephrata, PA 17522 717-859-3132
C.N. Wood Co. Inc. www.cn-wood.com
200 Merrimac Street Woburn, MA 01801 781-935-1919
140 Wales Avenue Avon, MA 02322 508-584-8484
102 State Road Whatley, MA 01093 413-665-7009
3 Rocky Hill Road Smithfield, RI 02917 401-942-9191
Baschmann Services, Inc. www.baschmann.com
ACK LOADERS AND SKID STTEERS
1101 Maple Road Elma, NY 14059 716-219-7045 Jersey Rents www.jerseyrents.com
Drobach Equipment Rental www.drobach.com
252 Atlantic City Blvd. Bayville, NJ 08721 732-361-4487
2240 Route 22 E Union, NJ 07083 908-686-0081
Heavy Machines, Inc. www.heavymachinesinc.com
2401 Broadway, Bldg. #3 S. Portland, ME 04106 877-202-1275 207-550-0014
159 North Avenue Skowhegan, ME 04976 888-875-3954 207-858-0051
Hoffman Equipment www.hoffmanequip.com
300 South Randolph Road Piscataway, NJ 08854 732-752-3600
1330 Hurffville Road Deptford, NJ 08096 856-227-6400
22 Peconic Ave. Medford, NY 11763 631-207-2900
1144 Zerega Ave. Bronx, NY 10462 718-822-1180
1440 Route 9W Marlboro, NY 12542 845-236-3000
120 Gordon Drive Lionville, PA 19341 610-363-9200
Komatsu Plans to Increase Its Sales, Service Capacity With New Facility
Stemming from its deep commitment to the area, Komatsu announced a significant greenfield expansion in Mesa, Ariz.
The expansion is centered on advancing sales and service capacity and will roughly triple the square footage dedicated to serving existing and new customers in the area.
“We conducted an extensive search to best meet our growth needs and are proud that we will continue calling Mesa home,” said Danny Murtagh, vice president of parts distribution at Komatsu. “Between our highly skilled workforce, existing partnerships in the area, and the projected economic outlook in the region, it is exciting to announce this expansion.”
Komatsu rendering The new facility, scheduled for completion in the spring of 2026, will be approximately 225,000 sq. ft., a significant increase from the current 75,000-sq.-ft. facility.
The new facility, scheduled for completion in the spring of 2026, will be approximately 225,000 sq. ft., a significant increase from the current 75,000-sq.-ft. facility. The site of the new facility is conveniently located close to the airport in southeast Mesa.
The expansion will promote the creation of both shortterm construction jobs and long-term jobs with Komatsu. In the first few years of operation, up to 100 additional jobs are
estimated to be created as a result of the expansion. The expanded sales and service facility represents a multi-million dollar strategic investment and underscores Komatsu’s commitment to the local economy and a positive outlook for economic growth in the region.
For more information, visit www.komatsu.com.
Newest Cat Grading Beams Deliver High Productivity Material Grading
New Cat grading beams for Cat tiltrotators allow contractors to take on dynamic and efficient grading and compaction work using excavators.
Pairing with Cat tiltrotators enables 360-degree bidirectional and 40-degree left-and-right rotation of the grading beam to increase attachment versatility. The grading beams’ mechanically adjustable roller — 0.40 in. below frame to 0.79 in. above — flexibly tailors the desired level of compaction based on material type. Preventing material from sticking to the roller, the adjustable roller scraper allows the attachment to be used with clay, silt and other sticky materials.
Available in five widths from 49 to 118 in., Cat grading beams quickly tackle a range of applications from grading sidewalks to larger site prep applications. The design’s large top opening with solid extended sides and side plates allow the beam to spread, compact, and grade materials quickly and effectively.
www.chappelltractor.com
www.highway-equipment.com
Highly abrasion resistant, Hardox 500 wear protection at the bottom of the beam protects the frame for long-life
Grading beams are constructed with support plates and abrasionresistant material to support long life and structural integrity.
operation. The beam’s welded frame increases structural rigidity, while additional support plates on the heavy-duty frame extend beam strength and overall service life.
Compatible with Cat Grade technology via the Cat tiltrotator attachment, contractors can grade to plan using Cat grading beams, improving accuracy and saving time. Available tool recognition automatically confirms the identity of the attachment to ensure all settings — pressure, flow and dimensions — are correct, allowing operators to quickly get to work.
Standard Cat PL161 attachment technology provides simple attachment tracking across all work sites, reducing the chance of a lost grading beam and assisting with maintenance and replacement. The PL161 integrates into VisionLink for fleet management from a single mobile device.
For more information, visit www.cat.com. (Photo courtesy of Caterpillar.)
www.medicoce.com
www.wtractor.com
19598 Cady Road (Exit 44-Watertown Center off I-81) Adams Center, NY 13606 888-335-0200 Watertown
9598 River Road • Marcy, NY 13403 800-872-2390
970 Wilkes Barre Township Blvd. Wilkes-Barre Township, PA 18702 800-872-2390
www.traceyroad.com
JCB Pledges $250,000 to Help Support Joe Walsh’s VetsAid Charity Organization
Alice Bamford and her family
JCB announced a special long-term partnership with multi-GRAMMY award winning musician and Rock and Roll Hall of Fame inductee Joe Walsh and his national 501(c)3 nonprofit veterans organization and annual benefit festival, VetsAid. The partnership will raise awareness and funds for U.S. veterans through the power of rock and the transformative process of rebuilding.
JCB, one of the world’s largest privately-owned manufacturers of construction and agricultural equipment, often deploys its machines in war-torn regions, playing a crucial role in the rebuilding process after conflicts. Recognizing their shared values and goals, Alice Bamford and Ann Eysenring of the JCB family company, reached out to their friends Joe and Marjorie Walsh and devised a partnership to generate additional valuable funds for American veterans who have served their country with dignity, compassion and honor.
Joe and Marjorie Walsh
The creative partnership kicked off with the official premiere of “Dig It” — an original song by Joe Walsh, debuting in London on July 13th during Monster Jam. This powerful anthem, also featuring Walsh’s brother-in-law Ringo Starr on drums, will be the soundtrack for JCB’s DIGatron and serve as an uplifting call-to-action to support the vital mission of VetsAid.
Inspired by Bamford and Eysenring’s eight-year-old son Otis, a monster truck enthusiast himself, Walsh sought to capture the excitement of a child and the raw energy of monster truck action in his composition.
60 Paul Rd. Rochester, NY 585/235-3011
1653 NY Route 11 Kirkwood, NY 607/775-2006
284 Ellicott Rd. Orchard Park, NY 716/662-2191
5835 East Taft Road
North Syracuse, NY 315/452-4560
1300 East Dunham Dr. Dunmore, PA 570/346-1701
46 Route 97 Waterford, PA 814/796-2663
2585 Lycoming Creek Rd. Williamsport, PA 570/494-4030
www.fivestarequipment.com
Additionally, JCB has pledged $250,000 to VetsAid to kick-off the partnership. Next up, supporters also can look out for limited-edition merchandise, a special JCB DIGatron toy and even a limited edition JCB machine, with a percentage of sales benefiting the non-profit organization.
“It is absolutely amazing to be working with Joe Walsh to raise further awareness for U.S. veterans,” said Bamford. “This is a legacy project between two families which will help give veterans and their families in the U.S. a better future, and offer them the care and support they deserve, which is something very close to all our hearts.”
Veterans and their families have always been important to Walsh, a Gold Star son himself who lost his father, Robert Newton Fidler, a U.S. Army Air Corps flight instructor for the first American operational jetpowered aircraft, while he was on active duty over Okinawa when Walsh was only 20 months old.
“VetsAid isn’t just about raising money and awareness for America’s veterans and their families,” Walsh said. “It’s also about finding common ground amongst music-lovers of all backgrounds and coming together to build and rebuild communities around a shared love of country. It’s a privilege for us at VetsAid to expand upon this vision with Alice and Ann, and our friends at JCB, and to keep the party going with this kick-ass new song and exciting partnership.”
For more information, visit www.jcb.com and www.vetsaid.org.
(Photos courtesy of JCB.)
2550 E. Cumberland St. Lebanon, PA 717/273-2616
800/225-4001
3215 State Rd. Sellersville, PA 215/258-5700
800/523-2209
400 Stoke Park Rd. Bethlehem, PA 610/867-4657 800/587-9790
640 Lowther Rd. Lewisberry, PA 717/938-6568 866/787-0001
179 Perry Hwy Harmony, PA 16037 724/776-3636
1973 Sheridan Rd Greensburg, PA 15601 724/837-4500
www.grofftractor.com
LARGE AND IN CHARGE OF SMALL SPACES.
You know what you need to run your business. Customers like you asked for easy-to-operate loaders that can maneuver in small spaces while handling big jobs. At just over eight feet tall, our G-Tier
and inside buildings. With a top speed of 18.6 mph for the 304 G-Tier — 55% faster than the 304L — plus impressive reach and dump-clearance capabilities, all three models are able alternatives to skid steers for loading trucks or placing pallets on trailers. Add any of over 100 available John Deere attachments to size up even more opportunities. To learn more, call or visit us today.
Middletown, DE
302/376-0784
Baltimore, MD
410/687-1700
Delmar, MD
410/546-1090
Frederick, MD
301/874-5500
District Heights, MD
301/909-7799
JESCO, Inc.
Waldorf, MD
301/861-2323
118 St. Nicholas Ave.
South Plainfield, NJ
908/753-8080
800/241-7070
1275 Bloomfield Ave. Fairfield, NJ
www.jesco.us
973/227-2221
800/321-8080
1790 Route 38
Lumberton, NJ
609/267-2020
888/217-0600
497 Fishkill Avenue Beacon, NY
845/831-1800
800/724-0725
Leslie Equipment
Beaver, WV
304-255-1525
Cowen, WV
304-226-3299
Cross Lanes, WV 304-204-1818
Pleasant Valley, WV
304-534-5454
Norton, WV
304-636-6421
Marietta, OH
740-373-5255
Ashland, KY
606-327-1709
Pikeville, KY 606-432-0321
www.lec1.com
United Construction & Forestry
North Oxford, MA 508-987-8786
North Billerica, MA 978-667-4345
Plymouth, MA 508-830-9997
NO. Swansea, MA 508-379-9810
Springfield, MA 413-543-5595
Clifton Park, NY 518-371-5111
Gouverneur, NY 315-287-0703
Hermon, ME 207-947-6786
Houlton, ME 207-532-6517
New Canada, ME 207-834-6701
www.unitedequip.com
Westbrook, ME 207-773-3777
Pembroke, NH 603-225-2769 Springfield, VT 802-885-6840
Williston, VT 802-658-2121
The W.I. Clark Company
Wallingford, CT
203/265-6781
Danbury, CT
203/775-1203
Plainfield, CT
860/546-4808
www.wiclark.com
Crews Add New North, Southbound Lanes Along I-81
from page 1
Covington is responsible for CIP projects along the entire 325-mi. swath of I-81 that runs from the state’s northern border to its southwest corner. Before the Bristol-area widening, Covington’s team took on several smaller projects including interchange ramp extensions and operational improvements.
“Three truck climbing lane projects — one completed near Seven Mile Ford and two under construction near Chilhowie — will provide passenger vehicles a safer area to pass slower moving trucks along the mountainous terrain,” said Covington. “VDOT also constructed additional digital message signs along the corridor. These digital message signs help alert drivers to upcoming traffic conditions and help them be prepared.”
VDOT also developed a corridor-wide transportation management plan guidance document to help standardize how project work zones are designed. Covington said this makes drivers feel more comfortable when encountering multiple work zones along the corridor, enhancing safety.
Crashes along I-81 in this area were a concern. The job of adding the lanes will last until 2025 and will cost approximately $40 million.
“Building the new lanes in the median created challenges,” said Holley. “Especially with vehicles entering and exiting into the traffic to deliver material. But getting the extra northbound lane included for minimal cost was a huge win.”
Bridge Construction
Another challenge for the builders was reconstructing the southbound I-81 bridge over Old Dominion Road.
“The bridge was small but complex to widen,” said Holley. “Building a precast structure solved some of the issues and provided a faster construction time. We also added a temporary traffic signal at Old Dominion Road to help provide access and maintain safety.”
The fabricator was just two miles away. Using the precast bridge enabled the construction team to preserve access to a subdivision during construction. Residents have been able to get in and out via singlelane access. The new bridge will be approximately 22 ft. wider than the old one and will better accommodate three southbound travel lanes.
Crossroads Bridge of Rural Retreat, Va., is building the bridge while W-L Construction and Paving of Chilhowie, Va., is the general contractor for the job.
Workers from the W-L team had to dig out approximately 36 in. of material before beginning to build the new lanes. The project will require approximately 55,000 tons of dirt and clay to be removed then filled with at least 12 in. of stone and dense-graded aggregate. The new lanes will be 14 in. thick and built with 42,000 tons of asphalt.
The project will require approximately 55,000 tons of dirt and clay to be removed then filled with at least 12 in. of stone and dense-graded aggregate.
The asphalt will be produced at W-L’s plant, located just 10 miles from the construction site with the aggregate arriving from quarries approximately 10 miles away.
“We always try to use recycled asphalt when we can,” said Jess Norman, project director of W-L Construction. “What we mill off a road we can use in the new pavement. We were given the approval to use between 20 and 25 percent recycled asphalt on this project.”
Adding Sound Wall
The construction team also will build nearly 2,000 linear ft. of sound wall on both the north and southbound lanes. The panels will be concrete and be built on the outside shoulder to shield residents from the freeway noise.
The construction team is required to maintain two lanes of traffic during regular hours. Workers will tighten traffic to one lane during certain periods of night-time paving. This
will be required as the I-81 bridge over Old Dominion Road is being rebuilt while accommodating active traffic.
Although building the new lanes in the median has resulted in some cost savings, the process has required ingenuity in both design and construction.
“The team will pave all the way to the concrete median barrier wall, which will separate the northbound and southbound traffic,” said Norman. “We will still have room for a 10-foot shoulder for each lane.”
The tight spaces led the construction team to bring in a barrier wall drilling machine. The equipment rests on top of the barrier wall and drills holes through the wall and into the pavement structure. The device securely pins the walls into place, a procedure that used to be done largely by hand.
In addition to being a permanent barrier wall, the structure will serve as part of the storm drain system. Water will drain through inlets in the wall into a system of pipes underneath the highway and into stormwater drains. The W-L team is building two new stormwater management basins as part of the project.
The construction team plans to complete some of the lanes by the end of this year, with the entire project slated to be finished by the end of 2025. This is a good fit with VDOT’s plan to continue to upgrade the I-81 corridor easing congestion and improving safety. CEG
(All photos courtesy of Virginia DOT.)
DELAWARE
Bobcat of Sussex County Delmar
302-846-3355
www.curtis-lane.com
MARYLAND
Metro Bobcat, Inc.
Eldersburg
410-795-1500
Forestville
301-568-1104
Gaithersburg
301-840-9300
White Marsh
410-483-0600 www.metrobobcat.com
NEW YORK
Bobcat of the Finger Lakes Fairport 585-223-4056 www.djmequipment.com
Robert H. Finke & Sons Inc. Selkirk
888-266-9821 • 518-767-9331 www.finkeequipment.com
Bobcat of Saratoga Gansevoort 877-461-5065 www.bobcatofsaratoga.com
Summit Handling Systems, Inc. Walden 845-569-8195 www.summitbobcat.com
PENNSYLVANIA
Bobcat of Lancaster
Dvsn of Crownstone Equipment Ephrata 717-859-4646
www.CrownstoneEq.com
Highway Equipment & Supply Co. Drums 570-788-1127 www.hwyequipbobcat.com
CONNECTICUT
Bobcat of Connecticut East Hartford 860-282-2648 www.bobcatct.com
Bobcat of Stratford Stratford 203-380-2300 www.bobcatct.com
MASSACHUSETTS
Bobcat of Greater Springfield West Springfield 413-746-4647 www.bobcatct.com
Bobcat of Worcester Worcester 508-752-8844
Bobcat of Rhode
Warwick 401-921-4300 www.bobcatct.com
H.O. Penn Machinery Invites Customers to Game at Citi Field
budget, utilization, application, hours, asset ownership plans, etc.”
Megan Gibbons, Cat aftermarket services representative, said, “While I’ve witnessed H.O. Penn putting their customers first day in and day out, it was a joy to see their team invest such special time, effort, and care into curating a fantastic customer event that not only demonstrates their appreciation for their customers, but also invites them into a continued, deeper partnership as dealer and customer.”
On overall value to their Caterpillar customers, Tim Passoni, Cat sales support manager, said about the rebuild program, “It was an honor to spend an evening engaging with customers about their business needs and discussing how H.O. Penn can ensure they don’t let the extra value that was built into their equipment go to waste. The H.O. Penn team will assess each customer’s specific situation and provide expert advice on how to best take advantage of the Cat Certified Rebuild Program.”
Alongside Caterpillar and H.O. Penn’s customers was H.O. Penn’s support lineup. Cheering on their favorite team in the game were parts and service representatives and managers with product support management staff. They might have chosen different sides regarding the N.Y. team rivalry, yet their unified vision for the benefit of the Cat Certified Rebuild program for their cus-
tomers remains clear.
Mike Hattar, director of marketing, said,
“Our sixth event in 12 years, these baseball outings have become somewhat of a tradition for H.O. Penn and our loyal customer base. It is a wonderful opportunity to extend our appreciation while sharing successes within the Cat Certified Rebuild space. H.O. Penn has completed more than
800 rebuilds in the past 12 years and we continue to add new models and first time rebuild customers to our immensely successful rebuild program. This year, we are proud to deliver to CAC Industries, a first of its kind, Cat 450F backhoe loader rebuild, truly an innovative addition to the rebuild product lineup!
Other customers hailing from N.Y. included Interstate Waste Services, Waste Connections, Action Carting, Cooper Tank, Tilcon, Butler Construction, 110 Sand and Gravel, town of Brookhaven Waste, town of Islip, Kelco Construction Inc., Grace Industries and others.
“On behalf of H.O. Penn Machinery Company and Caterpillar Inc., we would like to thank all our customers for making our Cat Certified Rebuild event at Citi Field an enormous success, said Lisa Katz, general parts manager. “It’s always a tremendous pleasure spending the evening with our customers and sharing memorable moments together.”
(All
ADMAR Construction Equipment & Supplies
www.admarsupply.com 800-836-2367
449 Commerce Rd. Vestal, NY 13850 607-798-0333
1394 Military Rd. Buffalo, NY 14217 716-873-8000
2390 Rochester Rd. Canandaigua, NY 14424 585-396-0031
1950 Brighton-Henrietta Town Line Rd. Rochester, NY 14623 585-272-9390
7800 Brewerton Rd. Cicero, NY 13039 315-433-5000
CHAPPELL TRACTOR
www.chappelltractor.com 454 Route 13 South Milford, NH 03055 603-673-2640
Eagle Power & Equipment Company
www.eaglepowerandequipment.com
West Chester, PA 610-458-7054
Doylestown, PA 215-348-9041
ERB & HENRY EQUIP. INC.
www.erbhenry.com
22-26 Henry Ave. New Berlinville, PA 19545 610-367-2169
Relationship Building Keys
Mass.-Based Business’ Success
Cole Landscaping’s JCB 55Z-1 compact zero tail swing excavator has proven to be a very useful tool, even more so with the addition of a thumb.
COLE from page 32
“We love our fleet of Dingo machines and use them for many applications, from pulling pipes to loading and unloading trucks,” he said. “We typically have one Dingo machine at each project that we are working on.”
Relationship building and reliability is the key to the company’s growth Cole said his company looks to receive the same from its vendors.
“Alta Equipment, who sold us the Dingo machines, gives us great customer service. Ryan Sears, our sales representative with Alta, understands the work that we do and does everything possible to keep our fleet up and running. But, with the Dingo machines we typically do not need any support. I would highly recommend that anyone in our business own these machines.”
Another machine that Cole Landscaping has purchased from Alta Equipment is a JCB 270T compact track loader.
“About two years ago, I knew we were going to be hit with a blizzard. With just one day’s notice, I called Ryan [Sears] and he showed up with a JCB 270T, a 74 hp compact track loader with a 2,700-pound load capacity. It was exactly what we needed.
“On short notice, he provided us with a compact track loader that perfectly met our needs. We use it constantly for snow all winter and we use it to load materials throughout the year. The machine is great. It’s easy to get in and out of, gives us great visibility thanks to the single arm boom and great ground speed.
“The single arm boom is very important to us from a safety standpoint,” he added. “The loader boom allows for a side door entrance, which means no more climbing over the boom to get into the cab, a great safety innovation. Besides providing a safer
environment for our operators, the machine is very stable and very strong.”
Another machine in the Cole Landscaping fleet is a JCB 417-wheel loader, a 2-yd. loader with a 125 hp engine. Cole Landscaping relies on this loader to fill its salters and help with the snow removal needs. One of the key features of the JCB 417 is its quiet motor operation.
“We live in a decibel restricted area,” Cole said. “We cannot have a machine that operates at over 100 decibels. The JCB 417 meets those decibel requirements.”
The most recent JCB purchase from Alta Equipment is a JCB 55Z-1 compact zero tail swing excavator with an operating weight of 12,000 lbs.
“Once again Alta Equipment delivered an awesome machine to us. It has tremendous digging and lift capacity and with the addition of a thumb it has become a very flexible tool for us.”
When asked why Alta Equipment is Cole Landscaping’s equipment supplier of choice, Cole said, “All of the machines are reliable and that’s important. But it’s really the performance of our sales rep that puts it over the top for us. I have his cell number and I am encouraged to call him day or night and, believe me, I do. Every time I have needed him, he has come through.
“I am a very loyal guy, that’s why we service customers the way we do at Cole Landscaping. Because we know that great service will ultimately give us customer loyalty. Alta Equipment and Ryan [Sears] have given us that same excellent level of service.”
For more information, visit www.altg.com and www.colelandscaping.com. CEG
(All photographs in this article are Copyright 2024 Construction Equipment Guide. All Rights Reserved.)
THE DOER’S DREAM
Loved for the features. Trusted for the performance.
Do more without feeling like it in Hyundai’s easy to own, easy to operate, skid steer and compact track loader.
Standard features include:
• LED front and rear work lights
• Auto leveling bucket
• Ride control
• Review camera
• Two speed travel
• AM/FM bluetooth radio
• Free Hi MATE telematics access for 5 years
No wonder so many first-time Hyundai users become longtime fans. See the Hyundai difference yourself at your local dealer, or na.hd-hyundaice.com.
Takeuchi Recognizes Top Dealers at 2024 Dealer Summit in San Antonio
Takeuchi recently announced its Dealer of the Year, Dealer Salesperson of the Year and the recipients of its 2023 Dealer 360° awards at the company’s 2024 Dealer Summit in San Antonio.
These awards recognize Takeuchi dealers across the United States and Canada for excellence in sales performance, facilities, training, accounts receivables, marketing/parts and service.
“Our Dealer 360° awards program outlines a unified standard of operation that promotes consistency among Takeuchi dealers,” said Jeff Stewart, president of Takeuchi-US. “We obviously want our dealers to be successful, and it’s our job to support them and provide the tools to make that possible.”
For their outstanding achievements in all program categories, the top five Takeuchi dealers for 2023 will head to Japan for a special visit to Takeuchi’s global headquarters.
• Parman Tractor & Equipment (Tennessee)
• Bennett Equipment & Supply (Georgia and South Carolina)
• Brandeis Machinery (Indiana and Kentucky)
• Luby Equipment (Illinois, Missouri and West Virginia)
• Power Equipment (Tennessee & Arkansas)
Parman Tractor & Equipment of Nashville, Tenn., earned the Takeuchi Dealer of the Year Award for 2023. The dealership focuses on providing top-notch service and machine expertise, making them a trusted partner customers return to again and again for their equipment needs.
“The team at Parman Tractor always goes the extra mile for their customers,” said Shay Klusmeyer, Western division sales manager of Takeuchi-US. “They embody the standards that we’ve set forth for Takeuchi dealers, and they’re always seeking continuous improvement. We’re proud to have Parman Tractor carry the Takeuchi equipment line.”
The following dealers also successfully met or exceeded the Dealer 360° criteria standards by Dec. 31, 2023:
• Alta Equipment Company (Florida)
• Central Illinois AG (Illinois)
• Chadwick BaRoss (Massachusetts, Rhode Island and Connecticut)
• Ditch Witch of South Louisiana (Louisiana)
• Dittamore Implement (Illinois)
• Feenaughty Machinery Company (Oregon)
• Hawkins-Graves (Virginia)
• Hayden Machinery (Missouri)
• Landmark Equipment (Texas)
• MasCo Equipment (Texas)
& Equipment.
(L-R) are Clay Eubanks, Takeuchi global director of sales; Eddie Bennett, Bennett Equipment & Supply; Chad Dodson, Power Equipment, Tennessee & Arkansas; Colin Hockenberger, Parman Tractor & Equipment; Toshiya Takeuchi, Takeuchi president; Mike Paradis, Brandeis Machinery; Steve Luby, Luby Equipment; and Jeff Stewart, Takeuchi U.S. president.
• McClung-Logan Equipment Company (Virginia)
• Power Motive Corporation (Colorado)
• Road Builders Machinery & Supply (Nebraska and Missouri)
• TEC Equipment Rental (South Carolina)
“We’re incredibly pleased with the performance of our growing dealer network over this past year,” Stewart said. “Their dedication and commitment to excellence have helped Takeuchi continue to increase its market share in North America. We thank them for an outstanding 2023, and we look forward to an even better year in 2024.”
For an unprecedented sixth time, Takeuchi-US recognized Bill Smith of Cobb County Tractor in Marietta, Ga., as its topperforming dealer salesperson in North America. Smith took home top honors after ranking number one in retail sales for North America.
“Bill continues to challenge himself to be our top dealer salesperson, year after year,” said John Vranches, Eastern division sales manager of Takeuchi-US. “His customers say he has an uncanny way of knowing exactly what equipment they need to tackle their projects. He’s always able to identify the best possible solution, and that kind of experience isn’t easy to find. We congratulate Bill on yet another successful year, and we challenge him to outdo himself yet again in 2024.”
For more information, visit takeuchi-us.com.
(All photos courtesy of Takeuchi.)
(L-R) are Eric Wenzel, Takeuchi Southeast business manager; John Vranches, Takeuchi East Division sales manager; Bill Smith, Cobb County Tractor; Jeff Stewart, Takeuchi U.S. president; and Henry Lawson, Takeuchi director of sales N.A.
Tool & Equipment 410 Burnham Street South Windsor, CT 06074 860-289-2020 www.abletool.net
1950 Brighton Henrietta Town Line Road • Rochester, NY 14623 585-272-9390
7800 Brewerton Road • Cicero, NY 13039 315-433-5000 449 Commerce Rd. • Vestal, NY 13850 607-798-0333 1394 Military Road • Tonawanda, NY 14217 716-873-8000
2390 Rochester Rd. • Canandaigua, NY 14424 585-396-0031
878 Old Albany Shaker Road • Latham, NY 12110 518-690-0750
3001 West 17th Street • Erie, PA 16505 814-833-7761 121 Armstrong Road • Pittston, PA 18640 570-299-5505
1990 McKees Rocks Road • McKees Rock, PA 15136 412-458-4421 16000 Brookpark Road • Cleveland, OH 44135 216-465-3737 www.admarsupply.com
www.centralequipmentco.com
Equipment East
61 Silva Lane • Dracut, MA 01826
978-454-3320
1474 Route 3A • Bow, NH 03304 603-410-5540
196 Manley Street • Brockton, MA 02301 508-484-5567
www.equipmenteast.com
Gamka Sales Co., Inc.
983 New Durham Rd.
Edison, NJ 08817
732-248-1400
Fax: 732-248-1445 www.gamka.com
Link-Belt Mid-Atlantic Construction Equipment
5263 Agro Drive, Suite 101 Frederick, MD 21703 301-732-7800 linkbeltma.com
Skyview Tractor Repairs, LLC
608 Fairview Road
Manheim, PA 17545
717-665-6997
www.skyviewtractor.com
Tri-County Contractors Supply, Inc.
154 Wayside Avenue
West Springfield, MA 01089
866-925-0211 • 413-733-5189 www.tricountycontractors.com
Funding Designed to Reduce Reliance On China for Batteries
BATTERY from page 1
The investments, reported CBS Detroit, are intended to help create and retain well-paying union jobs at the facilities.
“There is nothing harder to a manufacturing community than to lose jobs to foreign competition and a changing industry,” said Jennifer M. Granholm, U.S. secretary of energy.
Even as the nation’s competitors invest heavily in EVs, these grants ensure that the U.S. automotive industry stays competitive, she said.
And “does it in the communities and with the workforce that have supported the auto industry for generations,” added Granholm.
Biden’s Inflation Reduction Act (IRA) earmarked the funds. The facilities, combined, would potentially create nearly 3,000 new jobs.
The DoE said the awards also would ensure some 15,000 union workers are retained at all of the 11 facilities. The facilities selected for funding will have to negotiate before they receive the awards, according to DoE.
This process will allow them to make a variety of products for the automotive supply chain. Production includes electric motorcycle and school bus parts, hybrid powertrains, heavy truck batteries and electric SUVs.
Back in 2019, at the start of the coronavirus pandemic, there were two battery factories in operation and two under construction in the United States. Today, according to tech publication TechCrunch, there are currently more than 30 domestic battery factories planned, under construction or operational.
The IRA, signed during the summer of 2022, helped ramp up the pace of both battery and EV component factories.
The Biden White House set a goal of breaking China’s control of the supply and manufacture of lithium-ion batteries. Automakers were hesitant to repeat the chip shortage crisis that hampered manufacturing during the pandemic. As a result, China’s grip on the market was loosened when vehicle manufacturers promised in 2021 to build EVs and batteries inside the United States.
Through joint ventures U.S. auto manufacturers are building new factories and upgrading their existing facilities to meet the Biden administration’s goal to make 50 percent of all new U.S. vehicle sales electric or hybrid models.
“What has followed is a wave of automakers and battery makers, foreign and domestic, pledging to produce North American-made batteries before 2030,” said TechCrunch.
What’s in It for EV Producers, Buyers
The IRA has dangled an enticing carrot for both automakers and vehicle buyers.
TechCrunch reported drivers qualify for a $7,500 EV tax credit if they meet sourcing and production rules. The law requires 50 percent of the value of battery components be produced or assembled in North America this year to qualify for half the tax credit.
“To get the remaining half, 50 percent of the value of critical materials must be sourced from the U.S. or a free trade agreement country in 2024,” said the tech publication “That percentage increases to 60 percent, 70 percent and 80 percent for vehicles produced in 2025, 2026 and 2027 and beyond, respectively.”
Manufacturing credits built into the IRA benefit producers with a payout from the fed treasury.
Under the law, production of battery cells qualifies for a credit of $35 per kilowatt-hour of capacity; battery module production, $10 per kilowatt-hour.
“Companies can also be reimbursed 10 percent of the costs incurred due to the production of electrode active materials,” said TechCrunch.
The publication noted that auto and battery manufacturers have invested or promised approximately $112 billion in domestic cell and module manufacturing.
“Together, these companies promise to deliver an annual capacity of close to 1,200 gigawatt-hours before 2030, if each factory reaches maximum capacity.”
Biden’s IRA also has helped fuel $245 billion in clean energy and technology manufacturing, reports Atlas Public Policy’s Clean Economy Tracker.
Charting Rise of EV Production Facilities
TechCrunch tracked a web of EV auto and battery maker investment since 2020. The publication updated its report in July.
• BMW
In October 2022, BMW announced $1.7 billion for EV production operations in Spartanburg, S.C.
Of that, $700 million was allocated to the buildout of a battery assembly facility in nearby Woodruff, S.C.
The start of production is scheduled for the end of 2026, but BMW said it hasn’t confirmed which EVs will be produced there.
The Spartanburg factory is currently the site of BMW’s sports utility and crossover production facilities.
The automaker partnered with battery maker AESC to invest additional funds in a battery cell plant in Florence, S.C.
• Daimler, Paccar, Accelera, EVE Energy
Last September, Daimler Truck and Paccar formed a joint venture with energy technology company Accelera and Chinese battery maker EVE Energy.
The JV will build a battery cell production plant in Mississippi to support the adoption of EVs for medium- and heavy-duty commercial transportation.
• Ford
Ford got in on the ground floor relatively early, forming a JV with South Korean battery maker SK in late 2021.
BlueOval SK has plans to build three battery plants in the United States, including two in Kentucky.
A third plant in Tennessee will be co-located with a Ford assembly plant producing a second-generation electric truck. Ford and SK On secured a $9.2 billion loan from the DoE
equipmenteast.com
61 Silva Lane Dracut, MA 01826
978-454-3320
196 Manley Street Brockton, MA 02301
508-484-5567
250 Washington Street Auburn, MA 01501
508-635-5058
barryequipment.com
30 Birch Island Rd Webster, MA 01570
508-949-0005
7 Harrys Way Webster, MA 01570 508-949-0005
1608 John Fitch Blvd. South Windsor, CT 06074 860-288-4600
jerseyrents.com
252 Atlantic City Blvd. Bayville, NJ 08721 732-606-1002
322 Spring Valley Road Old Bridge, NJ 08857 732-591-2088
plt.com
1548 W. Housatonic Street Pittsfield, MA 01201 413-443-2623
chappelltractor.com 454 Route 13 Milford, NH 03055 603-673-2640
251 NH-125 Brentwood, NH 03833 603-642-5666
391 Loudon Rd. Concord, NH 03301 603-225-3361
westbranchrental.com 441 N. 10th Street Lewisburg, PA 17837 570-523-6216
68 H&S Drive Selinsgrove, PA 17870 570-490-8428
heavymachinesinc.com
2401 Broadway, Bldg #3 S. Portland, ME 04106 877-202-1275
159 North Ave. Skowhegan, ME 04976 888-875-3954
pennequip.biz
100 Windmill Hill Burnham, PA 17009 717-248-8876
hoffmanequip.com
300 S. Randolphville Rd. Piscataway, NJ 08854 732-752-3600 1330 Hurffville Rd. Deptford, NJ 08096 856-227-6400
22 Peconic Avenue Medford, NY 11763 631-207-2900
1144 Zerega Avenue Bronx, NY 10462 718-822-1180
1440 Route 9W Marlboro, NY 12542 845-236-3000
120 Gordon Drive Lionville, PA 19341 610-363-9200
More Than 30 Domestic Battery Factories Planned in U.S.
• Hyundai
to help finance the construction of the three battery factories.
TechCrunch said while one of the Kentucky plants is scheduled to begin production in 2025, the second has been paused as Ford studies EV demand. Ford also is building a lithium-iron-phosphate plant in Michigan with technology licensed by Chinese battery maker CATL.
• General Motors
General Motors signed a JV with LG Chem in December 2022 with a $2.5 billion fed loan for three battery production plants.
GM also announced a battery plant JV with Samsung SDI this spring for construction in the United States.
The automaker also has partnered with startup SolidEnergy Systems to build a prototyping facility in Woburn, Mass.
TechCrunch reported GM’s goal is to build a high-capacity, pre-production lithium-ion battery this year.
• Honda
In August 2022, Honda formed a JV with LG Energy Solutions to supply pouch-type battery cells. An Ohio plant will produce cells and modules.
The automaker is securing battery resource recycling channels in agreements with businesses including Ascend Elements, Cirba Solutions and Posco Holdings.
Honda’s engine plant in Anna, Ohio, is retooling to produce battery module casings that will power Honda and Acura EVs made in Ohio.
Last April, Hyundai and SK On set up a JV to build a $5 billion battery plant in Bartow County, Ga.
Soon after, Hyundai and LG Energy Solution formed a JV to build a battery cell factory near Savannah, Ga., according to TechCrunch.
This facility will support the production of 300,000 units of EVs annually once the plant reaches mass production.
Hyundai Mobis, Hyundai’s parts and service arm, will assemble battery packs using cells from the plant. Hyundai Mobis announced plans in 2022 to build an Alabama battery module plant to supply 200,000-plus batteries annually to its parent company.
• Mercedes-Benz
Mercedes-Benz opened a battery plant at its existing manufacturing facility in Alabama in 2022.
TechCrunch reported that the plant also became the production site for the automaker’s fully electric EQS SUV. The Alabama facility also builds the EQE SUV. The Maybach EQS SUV is to follow this year.
Mercedes also is working with Sila, a next-gen battery materials company, to incorporate silicon anode battery chemistry as an option for buyers of the upcoming GClass.
Sila replaces the graphite in a battery cell with silicon and is in the process of scaling up at its new Washington state facility.
• Stellantis
A Stellantis and Samsung SDI joint venture launched construction of an EV battery facility in Indiana in March 2023, producing lithium-ion cells and modules.
The company, which includes brands Alfa Romeo, Chrysler, Jeep and Ram, announced last July a second battery factory with Samsung, to open in early 2027.
The automaker also formed a JV called NextStar Energy with LG in 2021 to build a North American factory with an annual capacity of 40 GWh.
• Tesla
Since beginning production at Gigafactory Nevada in 2017, Tesla has provided about 39 GWh capacity annually, according to Panasonic.
In January 2023 the automaker announced plans to invest billions more into the Nevada factory to produce batteries for 1.5 million light-duty vehicles annually.
The 4680 cells, designed by Tesla and revealed at Battery Day 2020, are meant to reduce battery cost by over 50 percent.
At the start of 2023, Tesla made plans to expand its Gigafactory Austin for battery cell testing and manufacture of cathode and drive units.
• Toyota
Toyota’s planned battery plant in North Carolina, initially announced in 2021, will produce both cells and modules.
TechCrunch said with help from LG Energy, Toyota will build EV batteries out of its Michigan plant, and plans a battery lab at its R&D headquarters there. CEG
www.andersonequip.com
18 Gorham Industrial Pkwy Gorham, ME 04038 207/591-5482
142 Target Industrial Circle Bangor, ME 04401 207/942-0177
4176 Route 417 Allegany, NY 14706 716/372-8822
720 E Franklin Street Endicott, NY 13760 607/748-3400 115 Middle Road Henrietta, NY 14467 585/334-6770
2140 Military Road Tonawanda, NY 14150 717/877-1992 6317 Thompson Road Syracuse, NY 13206 315/463-8673 912 Albany Shaker Road Latham, NY 12110 518/785-4500 151 Packard Road East Montpelier, VT 05651 802/223-9689 1 Andy’s Way South Charleston, WV 25309 304/756-2800
www.chadwick-baross.com 15 Katrina Road Chelmsford, MA 01824 978/256-9571 10 Fox Hollow Road Oxford, CT 06478 860/261-0730 67 McGuire Road South Windsor, CT 06074 860/761-0381 31 James P. Murphy Ind. Highway West Warwick, RI 02893 844/238-7673
www.chappelltractor.com 454 Route 13 South Milford, NH 03055 603/673-2640 251 Route 125 Brentwood, NH 03833 800/616-5666 391 Loudon Road Concord, NH 03301 800/358-6007
www.amontanoco.com 571 Route 212, Saugerties, NY 12477 845/247-0206
www.medicoce.com 3647 Shafer’s Schoolhouse Rd. Stroud Township, PA 18360 570/420-0877 1510 Highway 315 Blvd. Wilkes-Barre, PA 18702 800/633-0027
www.hwyequip.com 4500 Paxton Street Harrisburg, PA 17111 717/564-3031 200 Burkholder Drive Ephrata, PA 17522 717/859-3132
122 Fritz Road Lititz, PA 17745 570/769-1070
www.GTMidAtlantic.com
Greenwood, DE 800/756-9433 Folcroft, PA 610/586-2710
Upper Marlboro, MD 301/627-3938 Baltimore, MD 410/247-7454 Frederick, MD 301/682-4441
www.contractorssales.com
121 Karner Road Albany, NY 12212 518-456-1445 • 888-468-5479 1283 Dolsontown Road Middletown, NY 10940 845-956-0222
454 Route 13 South Milford, NH 03055 603-673-2640
251 Route 125 Brentwood, NH 03833 800-616-5666
391 Loudon Road Concord, NH 03301 800-358-6007
7096 Carlisle Pike Carlisle, PA 17015 717-795-0700
www.marshall-machinery.com 348 Bethel School Road Honesdale, PA 18431 570-729-7117
www.georgeandswede.com 7155 Big Tree Road Pavilion, NY 14525 585-584-3425 • 800-724-8722
www.linkbeltma.com Ashland, VA 866-955-6071 Chesapeake, VA 800-342-3248 Frederick, MD 833-546-5235 New Castle, DE 302-501-6900 Chadwick-BaRoss
www.chadwick-baross.com 15 Katrina Road Chelmsford, MA 01824 978-256-9571
10 Fox Hollow Road Oxford, CT 06478 860-261-0730
67 McGuire Road South Windsor, CT 06074 860-761-0381
31 James P. Murphy Ind. Highway West Warwick, RI 02893 844-238-7673
LBX Co., Employees Celebrate 150 Years of Link-Belt Brand
LBX Company employees celebrated 150 years of the Link-Belt brand with a special event at the Customer Experience Center in Lexington, Ky.
The event featured various activities, including food, demonstrations, music and games. Employees reminisced about significant milestones in company history while looking toward future endeavors.
The Link-Belt brand was founded in 1874 by William Dana Ewart, who saw a need for reliable and durable innovations to help build emerging American infrastructure. Throughout the past 150 years, Link-Belt has grown from the invention of a “linked belt” chain drive to a leader in the industry.
The company has a long history of innovation, from introducing the first crawler-mounted crane shovels and wheelmounted excavators to many features that are now standard on excavators, including hydraulic controls.
Within the past 25 years, Link-Belt Excavator Company and its parent company, Sumitomo, have introduced a robust lineup of equipment encompassing six product series: Quantum, LX, X2, X3, X4, and the recently launched X4S. Further expanding its offerings, the 40 Series for forestry applications debuted in 2015, followed by the 2024 launch of the 40B Series.
LBX has established itself as a leader in excavators, material handling equipment and forestry products. Its commitment to excellence extends throughout North and Latin America, with LBX do Brasil as its subsidiary for distribution and support in Brazil and the broader Latin American market.
Business Calendar
ASSOCIATED GENERAL CONTRACTORS (AGC)
AGC Events Calendar:
All AGC Web-Eds are scheduled in Eastern Standard Time (EST). Conferences are scheduled using the local time zone where the event takes place.
• AGC EDGE Lean Construction Education Program, 2nd Edition
(https://training.agc.org/course/vlea 240901/)
Dates:Wednesday, Sept 4, 2024 (1:00 PM) – Monday, Sept 30, 2024 (4:00 PM)
Online, Virtual Training/Professional Development
• AGC EDGE Building Information Modeling Education Program
(https://training.agc.org/course/vbim240901/)
Dates:Tuesday, September 10, 2024 (1:00 PM) –Thursday, October 3, 2024 (5:00 PM)
Online, Virtual Training/Professional Development
• AGC EDGE Lean Construction Education Program, 2nd Edition
(https://training.agc.org/course/vlea 241101/)
Dates:Tuesday, Nov. 5, 2024 (10:00 AM) – Wednesday, Nov. 13, 2024 (7:00 PM)
Online, Virtual Training/Professional Development
KOMATSU COMPANY STORES EAST
OPEN HOUSE
Komatsu Company Stores East invites customers, partners and the public to attend the nearest open house in their area:
Date:July 31, 2024
Place: South Plainfield Location
“We at LBX are proud of our Link-Belt heritage and are honored to be part of a legacy that spans 150 years,” said Eric Sauvage, president and CEO. “We shape our future together with our employees and our business partners, guided by our Long-Term Strategic Framework while leaning on our core purpose, living and breathing from our core values, and relying on our strategic anchors to be successful.”
LBX Company has built its reputation on quality and customer service, demonstrating an unwavering commitment to providing its customers with the best possible products and services for many years.
For more information, visit lbxco.com.
2820 Hamilton Boulevard, South Plainfield, NJ 07080
Date:September 11, 2024
Place: Harrisburg Location 6375 Allentown Boulevard, Harrisburg, PA 17112
Date:September 18, 2024
Place: Hatfield Location 2240 Bethlehem Pike, Hatfield, PA 19440
Date:October 2, 2024
Place: Baltimore Location 1400 Joh Avenue, Baltimore, MD 21227
Each Open House will run from 10:00 AM – 2:00 PM
Attendees will have the opportunity to explore Komatsu’s latest equipment offerings, engage with industry experts and learn about operational solutions designed to support business goals.
Attendees can also be entered in a raffle for great prizes and enjoy a delicious lunch from a local food truck vendor. Learn more at www.komatsu.com.
CLEVELAND CRANE & SHOVEL SALES, INC. 2024 14th Annual Golf Outing and Dinner
DATES:SATURDAY, AUGUST 3, 2024
TIME: 11:00 AM Registration 12:00 PM Shotgun Start
PLACE:Fowler’s Mill Golf Course
13095 Rock haven Road Chesterland, OH 44026
Description: $100 per GOLFER! Sponsorship (Beverage Cart, Hole, Contest) Opportunities Available! Ticket includes 18 holes of golf with a cart, 1 mulligan per golfer, Lunch, Dinner, Drinks and Prizes! Dinner Only: $40, Dinner should begin approximately at 5:00 PM. All are welcome to join us! Prizes: Top three (3) teams, door prizes, cash & Bourbon raffle! Individual Contests!
Please make checks payable to: Cleveland Crane & Shovel Sales, Inc.
Mail to 26781 Cannon Road, Bedford Heights, OH 44146
Email: Stacy@craneandshovel.net
Forms/RSVP/Payment Deadline: July 19, 2024
For more information: Toll Free: 800/362-8494
LBX photo
LBX Company employees celebrated 150 years of the Link-Belt brand with a special event at the Customer Experience Center in Lexington, Ky.
Minnesota FARMFEST 2024 www.ideaggroup.com
Dates: August 6 – 8, 2024
Place: Redwood County, MN
Description: Minnesota FARMFEST 2024 is scheduled to take place from August 6 to August 8, 2024, in Redwood County, Minnesota. This event brings together the best in agribusiness from Minnesota and beyond, providing a platform for farmers to network, experience new technologies, and learn how to enhance their farming operations. With over 500 exhibitors and vendors, live product demonstrations, educational sessions, and family activities, it’s a celebration of farming and the rural lifestyle. Don’t miss out on this exciting event! Plan your visit to the show by reviewing our Schedule of Events. Each day of the show is filled with must-see forums, demonstrations, and AG Education. ***Remember, tickets are $10 at the Gate or $8 in advance purchased online, and kids 17 and under get in FREE! We thank our sponsors (Ziegler AG Equipment, Livestock Equipment & Manufacturing and NB Golf Car). See you there! For more information on this event, contact: Minnesota FARMFEST, 28366 Co Hwy 13, Morgan, MN 800/827-8007 www.ideaggroup.com
WERK-BRAU GOLF CLASS/CONSTRUCTION ANGELS CHARITY
2nd Annual Golf Classic
DATE:Monday, August 12, 2024
TIMES: 7:00 AM EDT to 5:00 PM EDT Registration at 8:00 AM Shot Gun Start at 10:00 AM
PLACE:The Ohio State University Golf Club 3605 Tremont Road, Columbus, OH 43221
Description: All proceeds benefit Construction Angels Charity, specifically families of fallen construction workers in Ohio. The outing will be held at The Ohio State University Golf Club’s Scarlet course with many amenities such as food, beverages, giveaways, and raffle items to be included. Our goal is to help make this event one of the most successful construction industry fundraisers in the state of Ohio, so your support is greatly appreciated! We’ve had a ton of repeat interest from last year and expect to sell out of teams very fast, so please sign up as soon as possible to guarantee yourself a spot.
If you have any questions, please don’t hesitate to reach out. For more information, contact Werk-Brau Toll Free: 1/800-5379561 or Call: 416/420-5250 Fax: 419/422-7207
AGGREGATES & INDUSTRIAL MINERALS ASSOCIATION (OAIMA)
The Ohio Aggregates & Industrial Minerals Association (OAIMA) is the trade association in Ohio that represents all the state’s mining operations, except coal. About OAIMA
“Aggregates” are materials consisting of sand and gravel, crushed stone and slag. The single largest market for aggregates is road and street construction, including base and asphalt paving for highways, parking lots and other pavements. “Industrial Minerals” include clays, shales, sand, salt and other non-fuel minerals used in construction and other industrial and commercial uses.
The Future
A ready supply of crushed stone, sand and gravel is necessary to support future economic development and infrastructure improvement. Aggregates are the elemental building blocks of Ohio’s economy. Aggregates are essential to maintaining the quality of American life.
IF IT CAN’T BE GROWN, IT HAS TO BE MINED!
Upcoming Events:
August 9, 2024 (10 AM – 1 PM) 13th Annual Ohio AGLIME Council Clay Shoot, BLACKWING Shooting Center Delaware, Ohio August 21
November 14, 2024 – Emerging Leader Graduation, Hilton at Easton, Columbus, Ohio
For more information on the Upcoming Events, contact Ohio Aggregates & Industrial Minerals Association (OAIMA): 746 Morrison Road, Gahanna, OH 43230 Phone: 1-800-OH-ROCKS–(614) 428-7954 Fax: 614/428-7919
AGC EDGE MS Project Training for Construction Project Managers (https://training.agc.org/course/ms-project-training-for-construction-project-managers/)
Dates: Thursday, September 5, 2024 (2:00 PM) –Thursday, September 12, 2024 (5:00 PM) Online, Virtual Training/Professional Development
Ahearn Equipment Inc.
www.ahearnequipment.com
Spencer, MA 01562 877/624-3276
Erb & Henry Equip., Inc.
www.erbhenry.com
New Berlinville, PA 19545 610/367-2169
ADMAR Construction Equipment & Supplies
www.admarsupply.com
Vestal, NY 13850
607/798-0333
Tonawanda, NY 14217 716/873-8000
Canandaigua, NY 14424 585/396-0031
Rochester, NY 14623 585/272-9390
Cicero, NY 13039 315/433-5000
Eagle Power & Equipment Company
www.eaglepowerandequipment.com
West Chester, PA 19380 610/458-7054
Doylestown, PA 18901 215/348-9041
Reading Tractor and Equipment
www.readingtractor.com
5538 Pottsville Pike
Leesport, PA 19533 610/926-2441
Marshall Machinery, Inc.
www.marshall-machinery.com
Honesdale, PA 18431
570/729-7117
Middletown, NY 10940 845/343-6683
South Abington Township, PA 18411 570/489-3642
Tannersville, PA 18372 570/895-4884
Belvidere, NJ 07823 908/475-8111
Westchester Tractor Inc.
www.wtractor.com
Brewster, NY 10509
845/278-7766
Chappell Tractor
www.chappelltractor.com
454 Route 13 South Milford, NH 03055
603/673-2640
www.wiclark.com 30 Barnes Industrial Park Rd. Wallingford, CT 203-265-6781 Danbury, CT 203-775-1203
www.fivestarequipment.com 118 St. Nicholas Ave. South Plainfield, NJ 08070 908-753-8080
570-494-4030 60 Paul Rd. Rochester, NY 14624 585-235-3011 1653 NY Route 11 Kirkwood, NY 13795 607-775-2006
OH 45750 740-373-5255
284 Ellicott Rd. Orchard Park, NY 14127 716-662-2191 5835 East Taft Road North Syracuse, NY 13212 315-452-4560
1790 Route 38 Lumberton, NJ 08048 609-267-2020 1275 Bloomfield Ave. Fairfield, NJ 07004 973-227-2221
1001 Industrial Dr. Middletown, DE 19709 302-376-0784
8411 Pulaski Hwy. Baltimore, MD 21237 410-687-1700
8200 Cryden Way District Heights, MD 20747 301-909-7799
48 Industrial Dr. Waldorf, MD 20602 301-861-2323
497 Fishkill Avenue Beacon, NY 12508 845-831-1800
110 East Jefryn Blvd. Deer Park, NY 11729 844-482-0910
9060 Ocean Hwy. Delmar, MD 21875 410-546-1090 1525 Tilco Dr. Frederick, MD 21703 301-874-5500
2550 E. Cumberland St. Lebanon, PA 717-273-2616
800-225-4001
3215 State Rd. Sellersville, PA 215-258-5700 800-523-2209
400 Stoke Park Rd. Bethlehem, PA 610-867-4657
800-587-9790
640 Lowther Rd. Lewisberry, PA 717-938-6568
866-787-0001
179 Perry Hwy Harmony, PA 16037 724-776-3636
1973 Sheridan Rd Greensburg, PA 15601
724-837-4500
JESCO is looking for candidates in a variety of different positions, including:
•
•
We have openings across all branch locations: South Plainfield, NJ … Lumberton, NJ … Beacon, NY … Deer Park, NY … Shrewsbury, MA … Baltimore, MD … Delmar, MD … Waldorf, MD … Middletown, DE
Whether you are entry level or experienced, JESCO wants you to be part of our world class team. We have exciting career opportunities for dedicated professionals who want to learn and grow with us.
Visit our career site at https://www.jesco.us/careers and apply today!
Vermeer Announces Several Enhancements to Its RTX1250
The Vermeer RTX1250 ride-on tractor has been updated with several improvements for increased efficiency and performance. These enhancements include updates to the tracks, axles, plow valve and retention pins, cab roof and headliner, as well as the auto stabilizer feature for the rockwheel attachment.
The RTX1250 is powered by a 127-hp (94.7-kW) Deutz TCD3.6L diesel engine and can be outfitted with a range of attachments for efficient installation of gas, fiber, water and electrical utilities.
Vermeer photo
Nick Olsen, Vermeer product manager, said that the manufacturer has implemented a series of updates to the RTX1250 based on insights and recommendations from its customers in the field.
The RTX1250 is powered by a 127-hp (94.7-kW) Deutz TCD3.6L diesel engine and can be outfitted with a range of attachments for efficient installation of gas, fiber, water and electrical utilities. see VERMEER page 103
“These updates have been meticulously tested to deliver productivity in demanding
WANTED (US): CATERPILLAR 140G MOTOR GRADER - 8000 OR UP SERIAL MODEL.
EMAIL: ROYALMACHINERYTRADERS@GMAIL.COM
PHONE: 0-33-6059-8261
––––––––––––––––––––––––––––––––
WANTED (CA): CATERPILLAR WHEEL LOADERS, ALL MODELS.
EMAIL: KARLOSZAC15@GMAIL.COM; PHONE: 657-274-8724 ––––––––––––––––––––––––––––––––
WANTED (OR): KOMATSU 3.0 YARD BUCKETS - NEED A 2015 KOMATSU WA270 LOADER BUCKET. QUICK RELEASE STYLE.
EMAIL: BRANDONDANLEY86@GMAIL.COM; PHONE: 1-541-213-4973 ––––––––––––––––––––––––––––––––
WANTED (US): JOHN DEERE 550K LGP CRAWLER DOZER - WANT TO BUY BULLDOZER 550KLGP OT 650KLGP 2021 AND UP. LOW HOURS (UNDER 600), ENC CAB, WINCH. UNDER $100,000
EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA
PHONE: 450-346-8975
WANTED (US): STERLING DUMP TRUCKS, ALL MODELS; LOOKING FOR A ROTARY HI RAIL DUMP TRUCK, PRE EMISSIONS, ANY MAKE/MODEL.
EMAIL: MURPHYCONTRACTORS@YAHOO.COM ; PHONE: 860-324-9693
WANTED (OH): FREIGHTLINER DUMP TRUCKS, ALL MODELS. LOOKING FOR A ROTARY HI-RAIL DUMP TRUCK, PRE EMMISSIONS, ANY MAKE/MODEL.
EMAIL:
MURPHYCONTRACTORS@YAHOO.COM
PHONE: 860-324-9693
WANTED (US): CUMMINS GENERATORS, ALL MODELS. LARGE PORTABLE OR STATIONARY GENERATORS IN ANY CONDITION — CAT, CUMMINS, DETROIT, MTU, PERKINS, VOLVO (DIESEL OR NATURAL GAS) CAN REMOVE IF NEEDED.
EMAIL: MICHSURPLUS@GMAIL.COM; PHONE: 201-679-6437
WANTED (WORLDWIDE): KOMATSU WHEEL LOADERS, MODELS WA 600-3 AND WA 600-6 2014 OR UP MODELS.
EMAIL: IUKANDCO@YAHOO.COM; PHONE: +923331234598 ––––––––––––––––––––––––––––––––
WANTED (WORLDWIDE): CATERPILLAR MOTOR GRADERS, MODEL 12G,14G,14OG,14OH ETC. RUNNING OR NON RUNNING UNITS.
EMAIL: IUKANDCO@GMAIL.COM; PHONE: +92-333-1234598
WANTED (PA): CAT OR CASE BACKHOE LOADERS, ANY CONDITION.
EMAIL: DEALER.SALES11@GMAIL.COM; PHONE: 717-621-3470
WANTED (IL): CATERPILLAR MODEL 416D BACKHOE LOADERS. LOOKING FOR ANY BACKHOES, CAT, CASE, JD –IN WORKING CONDITION OR WITH ISSUES. IF YOU HAVE SOMETHING YOU WANT TO GET RID OF IT, SEND ME. EMAIL: JANDWINS@GMAIL.COM; PHONE: 657-549-3619
––––––––––––––––––––––––––––––––
WANTED (TX): INGERSOLL RAND 185CWJD AIR COMPRESSOR, NEW. EMAIL: DAVID@FELDERWW.COM; PHONE: 713-542-0458
––––––––––––––––––––––––––––––––
WANTED (US): HATZ ENGINE - E71 HATZ DIESEL ENGINE, RUNNING OR PARTS
EMAIL: AILEENLOZZI@ME.COM; PHONE: 717-806-8969
––––––––––––––––––––––––––––––––
WANTED (US): KAWASAKI WHEEL LOADERS 80Z, 85Z, 90Z
EMAIL:
EQUIPMENTDESTINY@GMAIL.COM; PHONE: +1 346 484 0369
––––––––––––––––––––––––––––––––
WANTED (WORLDWIDE): VOLVO WHEEL LOADERS - LOOKING TO BUY VOLVO L320 , L330 OR L350F, YEAR ABOVE 2013. MUST BE RUNNER/NONRUNNER.
EMAIL: ALADNANENT@GMAIL.COM; PHONE: +923445757577
––––––––––––––––––––––––––––––––
WANTED (WORLDWIDE): ENGINE FOR A TRACK-TYPE TRACTOR - CATERPILLAR D6R XL SERIES II - ENGINE C9SERIAL #: 4ZF10784
EMAIL: MILANZOLL@INCOMERH.COM
––––––––––––––––––––––––––––––––
WANTED (US): CATERPILLAR 983-B; KOEHRING 1066, RUNNING OR NOT; GRADALL ON TRACKS, RUNNING OR NOT; DRESSER 250-E CRAWLER LOADER. CALL 267-738-5984
––––––––––––––––––––––––––––––––
WANTED (WORLDWIDE): DRESSER 125E CRAWLER DOZERS - LOOKING FOR A COMPLETE BOSCH VA PUMP OR HEAD AND ROTOR.
EMAIL: CRAIGBERENS944@GMAIL.COM
––––––––––––––––––––––––––––––––
WANTED (US): JOHN DEERE BROOMS / SWEEPERS, ALL MODELS. MID-SIZED JOHN DEERE OR HYUNDAI EXCAVATOR PLUMBED AND WITH CONCRETE PULVERIZER.
EMAIL: NEWYORKCWS@YAHOO.COM; PHONE: 973-956-8854
––––––––––––––––––––––––––––––––
WANTED (PA): NEW HOLLAND ATTACHMENTS - 7614 LOADER ATTACHMENT FOR NEW HOLLAND TRACTOR.
EMAIL: KEVCOOKENTERPRISES@GMAIL.COM; PHONE: 814-386-5541
––––––––––––––––––––––––––––––––
WANTED (FL): COTTRELL TRAILERS, ALL MODELS.
EMAIL: WILFREORLANDO@GMAIL.COM
WANTED (WORLDWIDE): CATERPILLAR WHEEL LOADERS, ALL MODELSNEED TO PURCHASE FOR OWN STOCK CATERPILLAR WHEEL LOADERS (916, 926, 936E, 950B, 950E, 950H, 966E, 966F, 966H, 970F & 980F.
EMAIL: ROYALMACHINERYTRADERS@ GMAIL.COM; PHONE: +923360598261
––––––––––––––––––––––––––––––––WANTED (MA): CATERPILLAR 308E2CR QC EXCAVATOR.
EMAIL: KKNOPE@DEFELICECORP.COM
––––––––––––––––––––––––––––––––
WANTED (US): KAWASAKI WHEEL LOADERS 85ZV , 90ZV , 90ZIV , 95ZV. ALSO SEARCHING FOR KOMATSU WA470-3 , WA600-3 , WA600-6... RUNNING OR NON-RUNNING CONDITION. EMAIL: ALADNANENT@GMAIL.COM; PHONE: +923445757577
––––––––––––––––––––––––––––––––WANTED (NC); CLARK ECX 25 FORKLIFT.
EMAIL: JBSSERVICES37@GMAIL.COM
––––––––––––––––––––––––––––––––WANTED (IL): CASE 580M III BACKHOE LOADERS; LOOKING FOR CATERPILLAR, CASE AND JOHN DEERE BACKHOE PARTS/SALVAGE MACHINES. RUNNERS AND NON RUNNERS, ANY CONDITION.
EMAIL: JANDWINS@GMAIL.COM; PHONE: 618-838-0841
––––––––––––––––––––––––––––––––WANTED (AL): KOMATSU 12 INCH BUCKET, PC35
EMAIL: JSGODSEY78@GMAIL.COM; PHONE: 205-485-4605
––––––––––––––––––––––––––––––––WANTED (US): ALL MODELS DITCH WITCH VACUUM/EXCAVATION
EQUIPMENT
EMAIL: BILL@DITCHWITCHNEWMEXICO.COM
––––––––––––––––––––––––––––––––WANTED (US): MANUFACTURER: JCB 540-170 TELEHANDLER, 2016 OR NEWER.
EMAIL: NORTHHEAVYEQUIPMENTS@GMAIL.COM
PHONE: 281-694-5478
––––––––––––––––––––––––––––––––WANTED (US): MISCELLANEOUS CATERPILLAR ATTACHMENTS. LOOKING FOR RELIABLE IT COUPLER ATTACHMENTS AND JOHN DEERE 644K FORKS (JRB COUPLER) TO ENHANCE OUR CONSTRUCTION OPERATIONS. WE REQUIRE ITEMS TO BE IN GOOD, WELL-MAINTAINED CONDITION. THE MOST DESIRED ATTACHMENTS ARE SIDE DUMP BUCKETS (LEFT AND RIGHT), BROOM ATTACHMENT, EXTENDABLE BOOM ATTACHMENT FORKS. PHONE: 484-781-2958
EMAIL: JWALSH@JAMESTOHARAINC.COM
––––––––––––––––––––––––––––––––
WANTED (US): CATERPILLAR 140G
MOTOR GRADERS - NEED TO BUY CAT MOTOR GRADER 140G/H, 14G,14M. ALSO LOOKING FOR A KOMATSU WHEEL LOADER WA-600 AND WA-900.
EMAIL: IKCEQUIPMENTS@GMAIL.COM
––––––––––––––––––––––––––––––––
WANTED (US): CATERPILLAR D10N CRAWLER DOZER. PLS PRICE FOB OR CIF ALEXANDRIA PORT EGYPT. EMAIL: ELEKTESADCO@YAHOO.COM; PHONE: 00201005311220
––––––––––––––––––––––––––––––––
WANTED (US): CLARK M371 SKID STEER LOADER
EMAIL:ANDYGRANGER30@GMAIL.COM
––––––––––––––––––––––––––––––––
WANTED (US): CATERPILLAR 336 EXCAVATOR - MUST HAVE A HYDRAULIC QUICK COUPLER, AUXILIARY HYDRAULICS AND GPS EQUIPPED. UNIT SHOULD HAVE BETWEEN 4-6000 HOURS. EMAIL: AARONA@BLACKSTARACA.COM PHONE: 737-587-1936
––––––––––––––––––––––––––––––––
WANTED (CA): CATERPILLAR OFFHIGHWAY TRUCKS - CAT MODELS 777C, 777D, 777F, 777G. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM; PHONE: 1-818-956-5231
––––––––––––––––––––––––––––––––
WANTED (CA): CATERPILLAR WHEEL LOADERS, ALL MODELS. LOOKING FOR 980K-M / 924 K-M / 416 420 430 C-D-E-F / 953 963 C-D-K / 580 590 MN EMAIL: FEEDBACK@GCESEQUIPMENT.COM PHONE: 657-456-2544
WANTED (IL): CATERPILLAR WHEEL LOADERS, ALL MODELS. LOOKING FOR CAT - CASE 980K-M /924 K-M /416 420 430 C-D-E-F /953 963 C-D-K / 580 590 M-N.
EMAIL: JANDWINS@GMAIL.COM ––––––––––––––––––––––––––––––––
WANTED (WORLDWIDE): KOMATSU WA-600, WA-500 AND WA-900 WHEEL LOADERS.
EMAIL: IKCEQUIPMENTS@GMAIL.COM
WANTED (IL): A CUMMINS 5.9 TURBO CHARGED ENGINE FOR A CASE 1155E LOADER.
EMAIL: KUBERSKIEXC@CHARTER.NET ––––––––––––––––––––––––––––––––
WANTED (TX): NEED CAT 988 USED WHEEL LOADER. IF AVAILABLE PLEASE CONTACT ASAP.
EMAIL: NORTHHEAVYEQUIPMENTS@ GMAIL.COM; PHONE: 281-694-5478
––––––––––––––––––––––––––––––––
WANTED (TX): ALL MODELS EAGLE CRUSHERS / PULVERIZERS / SHEARS. ISO PORTABLE, PREFERABLY CLOSED CIRCUIT, IMPACT CRUSHERS. ALSO INTERESTED IN PORTABLE SCREENS
EMAIL: GIVEBUYSELLTRADE@GMAIL.COM; PHONE: 512-822-8818
WANTED: KOMATSU WA600-6 WHEEL LOADER & CAT 988. IF AVAILABLE, PLEASE LET ME KNOW. THANKS. EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM
––––––––––––––––––––––––––––––––
WANTED (OK): CATERPILLAR D5N CRAWLER DOZER. EMAIL: JUNK4@ACEINVESTMENTS.COM; PHONE: 405-627-6246
––––––––––––––––––––––––––––––––
WANTED (US): CATERPILLAR MODEL 815 SOIL COMPACTOR. EMAIL: ANDREWL@BLACKSTARACA.COM; PHONE: 312-898-5355
––––––––––––––––––––––––––––––––
WANTED (IN): HYSTER H80FT FORKS EMAIL: YADAV.JYOTI178@GMAIL.COM
PHONE: 09500208661
––––––––––––––––––––––––––––––––
WANTED (WA): BOMAG BW 172 PADFOOT COMPACTORS | LOOKING FOR PARTS, SPECIFICALLY DRIVE TRAIN, OR WHOLE MACHINE TO USE FOR PARTS.
EMAIL: DYLAN@COLF.COM
PHONE: 360-798-5847
––––––––––––––––––––––––––––––––
WANTED (WI): JOHN DEERE 200C EXCAVATOR - WANT TO BUY 5000065000 POUND EXCAVATOR WITH HYDRAULIC THUMB UNDER 6000 HOURS, UNDER $90K, ANY MAKE. EMAIL: IUKANDCO@GMAIL.COM; PHONE: 0092-333-123-4598
––––––––––––––––––––––––––––––––
WANTED (US): ANY MANUFACTURER, ALL MODELS CRAWLER DOZERSLOOKING TO BUY JOHN DEERE 650KLGP WITH WINCH OR 550KLGP WITH WINCH, ENCL. CAB, UNDER 3500 HOURS, UNDERCARRIAGE NEAR NEW. EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA; PHONE: 450-346-8975
––––––––––––––––––––––––––––––––
WANTED (TX): CATERPILLAR MODEL 14H MOTOR GRADER.
EMAIL: NORTHHEAVYEQUIPMENTS@ GMAIL.COM; PHONE: 2816945478
––––––––––––––––––––––––––––––––
WANTED (TX): KOMATSU PC3000 EXCAVATOR – LOOKING FOR A KOMATSU PC3000 ENGINE. EMAIL: EQUIPMENTDESTINY@GMAIL.COM; PHONE: 832-244-1897
––––––––––––––––––––––––––––––––
WANTED (US): WANTED FOR A JCB
RUBBER TIRE BACKHOE LOADER 214 – A QUICK DISCONNECT DETACHABLE ADAPTOR FOR A SET OF FORKS. CAN NEED REPAIR. EMAIL DEANDRS@VERIZON.NET OR CALL 610-417-5123
––––––––––––––––––––––––––––––––
WANTED (US): ALL MODELS ALLMAND BACKHOE LOADERS.
EMAIL: SCRIBEDM@ZOOMINTERNET.NET ––––––––––––––––––––––––––––––––
WANTED (US): VOLVO EC480DL EXCAVATOR EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360
WANTED (OK): INTERNATIONAL H100C WHEEL LOADER - I HAVE A 1978 GREEN ARMY HUFF MODEL#H100C WHEEL LOADER VIN#IH2073. LOOKING FOR A COMPLETE 6 CYLINDER TURBO DIESEL INTERNATIONAL ENGINE DT466. EMAIL: CELMORE@RONSPBS.COM PHONE: 918-385-1623
––––––––––––––––––––––––––––––––
WANTED (US): CATERPILLAR 420D BACKHOE LOADERS – WE ARE LOOKING TO BUY FOR THE FOLLOWING BACKHOES: CASE (580K, L, M, SK, SL) CAT (416, 420 C/D/E/F), DEERE (310E, G, SE) AND JCB (214 SERIES 3). EMAIL: EQUIPMENTDESTINY@GMAIL.COM; PHONE: +1 832-244-1897
––––––––––––––––––––––––––––––––WANTED (US): HITACHI EXCAVATORS, MODELS EX 400 AND EX 450. EMAIL: AHMED@IUKANDCO.COM
WANTED (US): CATERPILLAR 340 EXCAVATORS - NEED TO LOCATE CAT EXCAVATORS 320, 330, 345, 365, 385, AND 390. EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM
––––––––––––––––––––––––––––––––WANTED (WORLDWIDE): VOLVO EXCAVATORS - LOOKING TO BUY USED VOLVO 480DL EXCAVATORS. EMAIL: USEDEQUIPMENT STRADINGLLC@GMAIL.COM; PHONE: +1-281-694-5478
––––––––––––––––––––––––––––––––WANTED (MI): WACKER NEUSON WL30 WHEEL LOADERS - LOOKING FOR ANY WHEEL LOADERS IN MICHIGAN UNDER 10,000 POUNDS & LESS THAN $15,000
EMAIL: CRAIGBERENS944@GMAIL.COM PHONE: 616-813-3642
––––––––––––––––––––––––––––––––WANTED (US): HITACHI ZX200-E EXCAVATOR. EMAIL: IUKANDCO@GMAIL.COM; PHONE: +923331234598
WANTED (US): LOOKING FOR MULITIPLE UNITS OF CATERPILLAR D7G CRAWLER DOZERS IN
+923322489350
Auctions are subject to change, please
ALEX LYON & SON AUCTIONEERS
www.lyonauction.com
315-633-2944
• Online
July 17 - 31, 2024
For: Rental Fleet Construction Equipment Auction
• Online
July 25 – August 8, 2024
For: Portable Heater Auction
• Online
August 1 - 15, 2024
For: One Owner Sale Babfar Equipment Corp.
• Pompey, NY
Sat., August 3, 2024
For: Late Model Construction & Ag Equipment Auction
• Cleveland, OH
Fri., August 16, 2024
For: Very Large Truck Auction
RITCHIE BROS.
AUCTIONEERS
www.rbauction.com
402-421-3631
• Rocky Mountain Regional Event
July 31 – August 1, 2024
• Rio Grande Valley Sugar Growers, Inc.
August 6, 2024
• Tipton, CA
August 8, 2024
• Orlando, FL
August 22 – 23, 2024
ABSOLUTE AUCTION & REALTY, INC.
www.AARauctions.com
800-243-0061
• Online
May 1 – December 31, 2024
For: Vehicles, Equipment & Government Auctions
• Online
Ends July 31, 2024
For: Schuyler County Surplus
Auction
• Online
Ends July 31, 2024
For: Otsego County Highway Surplus Auction
Auctioneers websites for details Coming Auctions
To view our complete list of upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com
ALLSURPLUS – A Liquidity
Services Marketplace
www.allsurplus.com
214-427-1862
• Online
July 10 – August 1, 2024
For: Excavators, Loaders, Drill Rigs, Dozers & More
AP NATOLI AUCTIONEERS
www.apnatoliauctioneers.com
609-693-6899
• Online
August 8 - 14, 2024
For: Heavy Equipment, Machinery & Truck Auction
AUCTIONS INTERNATIONAL
www.auctionsinternational.com
800-536-1401
• Online
July 18 – August 7, 2024
For: Online Auctions Closing Daily!
BAR NONE AUCTION
www.barnoneauction.com
866-372-1700
• Online Sat., August 10, 2024 For: Sacramento, CA Monthly Public Auction
BIDADOO AUCTIONS
www.bidadoo.com 1-877-BIDADOO
• Online August 6, 2024
• Online August 13, 2024
BIG IRON AUCTIONS
www.bigiron.com 800-937-3558
• Online July 31, 2024
• Online August 7, 2024
BRIGHT STAR AUCTIONS
www.brightstarauctions.com
574-825-0704
• Dunnville, KY
Thurs., August 1, 2024
For: Tarter Gate – Surplus Equipment Auction
BUSSEY BROS. AUCTIONEERS
www.busseybros.hibid.com
844-SOLD-BBA
• Greenville, OH
Sat., August 3, 2024
For: Farmer & Dealer Heavy Equipment & Ag Consignment Public Auction
FREIJE & FREIJE AUCTIONEERS
www.freijeauctioneers.com
317-539-2895
• Clayton, IN
Thurs., August 1, 2024
For: Summer Midwest Construction & Ag Equipment Auction
INTEGRITY SALES & AUCTION
www.integritysales.com
715-443-5000
• Merrill, WI
August 1 - 5, 2024
For: Annual Summer Heavy Equipment Auction
I.R.A.Y. AUCTION
www.iraymn.com
320-968-7230
• Online
Wed., August 7, 2024
For: Heavy Equipment, Truck & Trailer Auction
J.J. KANE AUCTIONEERS
www.jjkane.com
855-GO2-KANE
• Online
July 30 - 31, 2024
For: Southern Region 2-Day Timed Auction
JAMES G. MURPHY INC. AUCTIONEERS
www.murphyauction.com
425-486-1246
• Online August 1 - 8, 2024
For: Marysville Public Heavy Equipment, Contractors Equipment & Vehicles Auction
JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com
601-450-6200
• Goldsboro, NC
Thurs., August 8, 2024
For: Complete Liquidation: Heavy Construction & Logging Equipment
MIEDEMA ASSET MANAGEMENT GROUP
www.1800lastbid.com
616-538-0367
• Online
Ends July 31, 2024
For: Cheeseman Transport Fleet Turnover Semi Truck Liquidation
• Ortonville, MI
Ends August 1, 2024
For: Repo’s, Truck, Trailers, Equipment and much more
• Gaylord, MI
Ends August 1, 2024
For: Repo’s, Truck, Trailers, Equipment and much more
• Online
Ends August 6, 2024
For: Construction/Heavy Equipment & Commercial Lawn Equipment
• Online
Thurs., August 1, 2024
For: Truck & Trailer Auction
• Online
Wed., August 7, 2024
For: Vehicles & Equipment Auction
QUARRICK EQUIPMENT & AUCTIONS INC.
www.quarrickauction.com 724-439-1621
• Uniontown, PA Thurs., August 1, 2024
For: Construction, Ag, Transportation Equipment Auction
SALES AUCTION COMPANY, LLC
www.salesauctioncompany.com
860-627-7506
• Online
Fri., October 25, 2024
For: 15th Annual Fall Sale
• Windsor Locks, CT Sat., October 26, 2024
For: 15th Annual Fall Sale
SHETRON AUCTION & EQUIPMENT LLC
www.shetronequipment.com 717-532-8828
• Shippensburg, PA
Wed., July 31, 2024
For: Construction & Farm Equipment Auction
SOLD AUCTION COMPANY www.soldauctionco.com 404-725-2267
• Macon, GA
Fri., August 9, 2024
For: Late Summer Contractors Auction
YODER & FREY
HEAVY EQUIPMENT AUCTIONS
PURPLE WAVE AUCTION
www.purplewave.com
866-608-9283
• Online
Wed., July 31, 2024
For: Ag Equipment Auction
www.yoderandfrey.com 419-865-3990
• Berkeley, CA
Thurs., August 1, 2024
For: Golden Gate Fields Dispersal Auction
1. TIMED: Closes- Wednesday, July 31, Opens- Wednesday, July 17: BRIDGEPORT, NEW YORK: Late Model Rental Fleet Construction Equipment Auction. Large Quantity Boom & Scissor Lifts, Forklifts, Light Plants, Utility Vehicles Plus Skid Steers, Generators, Support Equipment from the Largest Rental Fleet in the USA. Plus Large Quantity of Attachments, New & Used Trailers.
2. LIVE: Saturday, August 3: POMPEY, NEW YORK: Late Model Construction & Agricultural Equipment, Aerial Lifts, Attachments, Support, Trucks, Trailers, (7)Mack Dump Trucks. Something for Everybody.
3. TIMED: Closes- Thursday, August 8, Opens- Thursday, July 25: ALBANY, NEW YORK: One Owner Sale. Probably the Largest Portable Heater Auction Ever. Over 500 Units in Tip-Top Condition Ready for the Upcoming Season, Vehicles, Parts, Support.
4. TIMED: Closes- Thursday, August 15, Opens- Thursday, August 1: MILLIS, MASSACHUSETTS: One Owner Sale. In Conjunction with Paul E. Saperstein Co., Inc. 400+ Heating Equipment, Machine & Fabricating Shop, Construction Equipment, Forklifts, Pickups, Truck Tractors and Support.
5. LIVE: Tuesday, August 20: AUSTIN, TEXAS: Retirement Auction. One Owner. A Premier Contractor. Very Late Model Aggregate and Construction Equipment, (2)Cat D10R(excellent), Water & Mechanic's Trucks, Truck Tractors, Low Bed Trailers, Large Quantity Support, Parts, Buckets, Attachments and more.
6. LIVE: Thursday, August 22: SOMERSET, PENNSYLVANIA: Large Cat & Komatsu Construction Equipment Auction. Aerial Lifts, Service & Dump Trucks, Truck Tractors, Various Support, Light Plants, Welders, Generators. HIGHLIGHTS: Cat D11R, Cat D10T, (2)Cat D9T, Cat D9N, Cat D8L, (3)Cat D6T, Hitachi EX1800-2(shovel), Komatsu PC1000, Komatsu PC360, Cat 365CL, Cat 988F, (3)Cat 980G, (2)Cat 777C-3, (3)Komatsu HD785C.
7,8. LIVE: Friday, August 23, & TIMED: Closes- Saturday, August 24, Opens- Saturday, August 10: DUNKIRK (Buffalo), NEW YORK: One Owner Retirement Auction. Major Trucking Company. (20-25)Truck Tractors, (100)Van Trailers, Step Deck and Detachable Trailers, Landoll Forklifts & Skid Steers, Several Army Trucks(6x6), Unbelievable Amount of Support, Shop Equipment, Tools and Tires.
9. TIMED: Closes- Thursday, August 29, Opens- Monday, August 19: LANCASTER (Columbus), OHIO: Large Quantity Late Model 53ft. to 48ft. Van Trailers.
10. LIVE: Friday, September 13: ALBANY, NEW YORK: Major Job Completion. Primarily Cat, Komatsu, John Deere, Volvo Earthmoving Equipment, Articulated Haul Trucks, Attachments, Dump Trucks, Truck Tractors, All Types of Trailers.
11. LIVE: Saturday, September 14: LAS VEGAS, NEVADA: Large Rental Fleet Construction Utility Equipment Auction (Primarily Cat). Motor Graders, Crawler Tractors, Aerial Lifts, Forklifts, Trucks, Trailers, Large Quantity of Support.
12. LIVE: Friday, September 20: ATLANTIC CITY, NEW JERSEY: 1 Owner Retirement Auction. Over 50 Years in Business on site. Very Well Maintained Construction and Aggregate Equipment. Primarily Cat, Case, John Deere, Dump Trucks, Truck Tractors, Equipment and Dump Trailers, Support Equipment, Attachments.
13,14. LIVE: Saturday, September 21, & TIMED: Closes- Sunday, September 22, Opens- Thursday, September 12: ATLANTIC CITY, NEW JERSEY: Rentals, Rentals. Very Late Model Construction, Utility Equipment, Forklifts, Aerial Lifts, Truck Tractors, Dump Trucks, Service & Utility Trucks, All Types of Trailers, New & Used Support Equipment, Attachments.
15. LIVE: Thursday, September 26: GREENVILLE (Fort Worth), TEXAS: Highlights Include Late Model Cat, John Deere, Komatsu Rental Fleet Equipment, Aggregate, Trucks, Trailers, Attachments and Support. (30)Late Model Pickup Truck Tractors, Service Trucks, (15)Late Model Tagalong Trailers.
16. LIVE: Friday, October 4: NEW ENGLAND: One Owner Retirement Dispersal Auction. Late Model Aggregate (Crushers & Screening Plants), and Construction Equipment, Trucks of all kinds and Support.
17. LIVE: Saturday, October 5: NORTH ATTLEBOROUGH, MASSACHUSETTS: Very Large Snow Equipment Auction. Late Model
Rubber Tired Loaders(Cat), Large Quantity Late model 4x4 Pickup Trucks, Snow Trucks, Snow Plows, Snow Blades, Sidewalk Snow Removal Equipment, Various Attachments and Support.
18. LIVE: Thursday, October 10: ACME, PENNSYLVANIA: Late Model Construction Equipment, Aerials, Forklifts, Trucks Trailers, Support and Attachments.
19. TIMED: Closes- Thursday, October 17, Opens- Monday, October 7: HOLBROOK (Long Island), NEW YORK: One Owner Retirement Auction. One of the Premier Fabrication Shops in the Northeast (It's Huge). Plus Small Quantity Construction Equipment and Trucks.
20. LIVE: Friday, October 25: ALIQUIPPA, PENNSYLVANIA: Major Job Completions of Late Model Construction, Earthmoving Equipment, All Types Trucks, Trailers, Attachments and Support.
21. TIMED: Closes- Thursday, November 7, Opens- Thursday, October 24: CENTRAL PENNSYLVANIA: Large 18 Location Auction. Construction, Aggregate, Utility Equipment, All Types of Support, Attachments, Trucks and Trailers.
22. LIVE: Saturday, November 9: NIAGARA FALLS, NEW YORK: Large Rental Return Agricultural & Construction Equipment Auction. Aerial Lifts, Forklifts, Attachments, Large Quantity Support and Tools.
23. TIMED: Closes- Saturday, November 30, Opens- Wednesday, November 20: BRIDGEPORT, NEW YORK: Late Model Rental Fleet Construction Equipment Auction. Large Quantity Boom & Scissor Lifts, Forklifts, Light Plants, Utility Vehicles Plus Skid Steers, Generators, Support Equipment from the Largest Rental Fleet in the USA. Plus Large Quantity of Attachments, New & Used Trailers.
24. LIVE: Friday, December 27: GREENWICH (Albany), NEW YORK: Large Rental Return Auction. Very Late Model Agricultural & Construction Equipment, Utility Equipment, Forklifts, Boom & Scissor Lifts, Air Compressors, Generators, Welders, All Types of Trucks, Trailers, Very Large Quantity New & Used Attachments and Tools.
NEW DATES TO BE ANNOUNCED
25. SCRANTON, PENNSYLVANIA: Rental Returns of Construction & Utility Equipment, Plus Beautiful Piece of Real Estate with Large Building.
26. SARATOGA, NEW YORK: Retirement. Complete Liquidation. It's Big. HIGHLIGHTS: JD 650KLGP(winch, 200hrs.), JD 450J, Linkbelt 350X4LC, 2021-2019 Linkbelt 75, Like New Kubota 97, (2)Cranes: Grove 540E, Grove RT525B, (2)Telescopic Forklifts: Genie TL844, Genie TL642, Pipe Benders, Air Compressors, Light Plants, Utility Vehicles, 2017 Freightliner(46R), 2016 Eager Beaver GSL 55T Lowboy, 2018 Jer Dann Rollback(46R, t/a), Over 500 TopLine Support & Attachments.
27. SARDIS, OHIO: Secured Creditor Auction. All Types of Construction Equipment, Aerials, Truck Tractors, Dump Trucks, Pickup Trucks, All Types of Support and Accessories.
28,29. 2 DAY AUCTION: LIVE: & TIMED: PITTSBURGH, PENNSYLVANIA: Retirement Auction. 65 Years in Business. Late Model Construction Equipment. Primarily Cat, Peterbilt Truck Tractors, Dump Trucks, Service & Pickup Trucks, Cranes, Equipment and Dump Trailers, Enormous Amount of Buckets, Support Equipment, Tools, Tires and much more.
30. TIMED: CENTRAL NEW YORK: Estate Auction. Gentleman's Farm and all Related Equipment. Late Model Trucks, Cars, Collectibles, Wood Working Shop and much more.
31. LIVE: CLEVELAND, OHIO: Very Large Truck Tractor, Dump Truck, Concrete Mixer Truck, Equipment & Van Trailers, Straight Trucks, MultiContainer Trailer, Office Trailers, Forklifts and Support.
32. LIVE: BUSHNELL, FLORIDA: Rental Fleet Construction Equipment, Aerial Lifts, Forklifts, Skid Steers, Support, Attachments, Trucks, Trailers, Office Trailers and more.
Alex Lyon Holds Annual Barbecue, Hay Camp, Auction
Each year, Alex Lyon & Son holds a customer appreciation event at the company’s headquarters in Bridgeport, N.Y., which also is the location for Jack Lyon’s home and family farm. The barbecue and hay camp features great food, beverages, live entertainment and draws hundreds of attendees from across the United States.
Held in nearby Canastota, N.Y., a large two-day sale also was held July 13 and 14, 2024, and featured 15 dump trucks, 56 hydraulic excavators, 32 loaders, seven tractor loader backhoes and more. In total, bidders vied for mostly late-model used construction equipment coming off rent.
In attendance was Machinery Pete, a media influencer who hosts his own weekly television show that tracks primarily agricultural equipment prices and operates a dynamic website, machinerypete.com.
Machinery Pete, whose given name is Greg Peterson, started his very successful media company in Minnesota decades ago. Peterson was in attendance as a part of his effort to produce a television segment on his program featuring Jack Lyon and his company, Alex Lyon & Son.
(All photographs in this article are Copyright 2024 Construction Equipment Guide. All Rights Reserved.)
see LYON page 100
Alex Lyon Holds Large Two-Day Sale in Canastota, N.Y.
Sales Auction Company Holds Sale for Peckham Industries
Sales Auction Company hosted an absolute auction June 20, 2024, exclusive to the family of businesses owned by Peckham Industries, currently celebrating its 100th anniversary.
Over the past 100 years, Peckham Industries has supplied materials, paved roads and worked on construction projects. With more than 30 locations in eastern New York and southern New England, Peckham Industries is well positioned to continue to serve its customers into the next century. The sale, held in Westfield, Mass., included an inventory of more than 250 pieces of equipment that bidders would expect to find from a major aggregate concrete and paving producer and contractor, including 45 pieces of paving, grading and compaction equipment; 13 skid steers; 33 trucks; 20 trailers; 15 wheel loaders and backhoes; and other types of support equipment. CEG
(All photographs in this article are Copyright 2024 Construction Equipment Guide. All Rights Reserved.)
see AUCTION page 104
n v dre srk lr reyc i o r te r , be v i m c d b ad orc x a i vn eeresz o aco h cbk awa , ss cko toa ag leiill uec rv at s
RTX1250 Improvements Include Tracks, Axles, Plow Valve, More
environments. Vermeer is dedicated to consistently enhancing and refining their machinery to satisfy industry demands and customer needs. The latest version of the RTX1250 exemplifies this commitment.”
The RTX1250 is a versatile machine, able to operate as a trencher, rockwheel or vibratory plow with interchangeable attachments. These can be switched out in as little as an hour, offering options such as a backhoe, backfill blade or reel carrier attachment for the front of the machine and a vibratory plow, rockwheel, sliding offset rockwheel, sliding offset trencher or a trencher for the back end.
The tractor is equipped with Vermeer onboard technology, including TrenchSense electronic control system and the EcoIdle engine control system. These systems actively monitor the engine’s operations to promote smooth trenching, prevent stalls and optimize fuel efficiency.
The Productivity Zone feature and Auto Plunge technology of the RTX1250
enhance its performance by determining the optimal operating range and ground speed for the attachments in use and by controlling the plunge rate for trencher or rockwheel attachments, respectively.
The Vermeer RTX1250 prioritizes operator comfort and visibility. Its controls are located conveniently on the right-hand side, in line with the seat’s pivoting side.
The RTX1250 provides a quiet ride and features an isolated, cushioned operator’s platform. An optional climate-controlled cab is available for year-round operation. Depending on job requirements, the rideon tractor can be outfitted with rubber tires or tracks.
The RTX1250 is Vermeer Fleet ready, which means owners can optimize productivity by staying in sync with their machine’s operations. Vermeer Telematics allows for monitoring engine operating hours, idle hours, fuel usage, fault codes and the machine’s location. It also incorporates geofencing capabilities. For more information, visit w ww.vermeer.com.
More Than 250 Equipment Items Go On Block in Westfield, Mass.
AUCTION from page 102
Always looking for some good paving
are