Northeast 20 October 4, 2017

Page 1

Published Nationally Northeast Edition

® October 4 2017 Vol. LV • No. 20

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

ACAA Unveils $1B Plan for Pittsburgh Airport...8

New Millennium Rentals Expands Excavator Fleet...14

Three Generations of Hoffmans Tour Job Site...20

Table of Contents.................... 4 Off-Road Trucks Section............ .......................................... 71-85 Paving Section................ 87-102 Business Calendar................114 Snow & Ice Section...... 125-129 Parts Section........................ 130 Auction Section..134-145 Advertisers Index...146

Maryland Gov. Announces $9B Traffic Relief Plan Delivering on his commitment to provide innovative transportation solutions for Maryland, Gov. Larry Hogan announced on Sept. 21 the administration’s plans to add four new lanes to I-270, the Capital Beltway (I-495) and the Baltimore-Washington Parkway (MD 295). The $9 billion Traffic Relief Plan for these three major state highways will reduce congestion for millions of drivers and mark the beginning of a historic and transformative effort to significantly improve the traffic conditions on some of Maryland’s most traveled roads and highways for years to come. The three “Sister Bridges” that are part of the Pittsburgh, Pa., city skyline are “These three massive, unprecedented projects to undergoing a major rehabilitation project, and the Andy Warhol (7th Street) Bridge widen I-495, I-270 and MD 295 will be absolutely is the first to undergo the process. transformative, and they will help Maryland citizens go about their daily lives in a more efficient and safer manner,” said Hogan. “Today, we are turning Maryland’s celebrated innovation into real action. These projects will substantially and dramatically improve our state highway system and traffic in the region.” Joining the governor were Maryland Department of Transportation (MDOT) Secretary Pete K. Rahn; MDOT State Highway Administrator Greg Slater; the Roberto Clemente (Sixth Street Bridge) Maryland Transportation Authority Executive Director By Brenda Ruggiero and the Rachel Carson (Ninth Street Kevin Reigrut; as well as elected officials and commu- CEG CORRESPONDENT Bridge). All three bridges are currently nity and business representatives from throughout the The three “Sister Bridges” that are part of owned and maintained by Allegheny Baltimore-Washington region. The announcement officially begins the process to the Pittsburgh, Pa., city skyline are undergo- County. The Andy Warhol Bridge is actually solicit the Public-Private Partnership (P3) industry for ing a major rehabilitation project, and the input and solutions to provide major congestion relief Andy Warhol (7th Street) Bridge is the first the second bridge to be placed at the site, to undergo the process. The other bridges are see BELTWAY page 112 see BRIDGE page 116

Pittsburgh’s Andy Warhol Bridge Undergoes $25M Reno

Mecalac Ramps Up Presence in United States When France-based construction equipment manufacturer Mecalac made its first impression in the United States market in mid-2016, it was through Lorusso Heavy Equipment, based in Walpole, Mass. This allowed Mecalac to introduce its unique equipment line to the New England construction market The company’s innovative approach to construction design continued in 2017 when it launched the new MWR Series, a compact wheeled excavator, in May 2017.

with the assistance of Lorusso, which also was responsible for helping set up a nationwide distribution network for the manufacturer. A lot has happened since then. In December 2016, Mecalac acquired the Terex Group’s production plant for side dumpers, backhoe loaders and compactors in Coventry, Great Britain. Then, while initially launching in the New England market with its MCR Series (what Mecalac dubs a “crawler skid excavator”), the company see MECALAC page 24


Page 2 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

are you ready?

SNOW SEASON IS APPROACHING...

2014 CAT 938K 1324 Hours

$145,000

Ransome Cat, 2975 Galloway Rd, Bensalem, PA 19020

(215) 444-7047

ID# CR30747, Cab, AC, Ride Control, 3rd Valve, Fusion Coupler, GP Bucket

2015 CAT 226D

2014 CAT 236D

2014 CAT 259D

2013 CAT 420F

137+ Hours

482 Hours

979 Hours

1325 Hours

Starting at $33,500

$35,000

$44,500

$65,000

Only 2 Remaining, Cab, AC, 2 Speed, Ride Control, Electric Coupler, GP Bucket

Only 1 Remaining, Cab, AC, High Flow, 2 Speed, Ride Control, GP Bucket

ID# CR30756, Cab, AC, High Flow, 2 Speed, Ride Control, GP Bucket

ID# UP20695, Cab, AC, 4WD, E-Stick, Ride Control, MP Hydraulics, GP Bucket

2015 CAT 914K

2014 CAT 906H2

2014 CAT 908H2

2008 CAT 980H

469 Hours

2,214+ Hours

242+ Hours

210,122 Hours

$105,000

Starting at $59,000

Starting at $69,900

ID# CR31306, Cab, AC, 3rd Valve, Ride Control, Quick Coupler, GP Bucket

Only 2 Remaining, Cab, AC, 22 MPH Trans, Ride Control, Quick Coupler, GP Bucket

Cab, AC, 22 MPH Trans, Quick Coupler, GP Bucket

$135,000 ID# UT10934, Cab, AC, Ride Control, Scale, GP Bucket, Recent Engine, Trans, Torque Converter, & Implement Pump Work


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 3

YOUR NEEDS. UNE N ARTHED. Building your con nstruction business togeth her. Our G-Series Compact Excavators E may be VPDOO EXW WKH\ŤUH IXOO RI ELJ LGHDV IURP FRQWUUDFWRUV DQG Æ HHW PDQDJHUV OLNH \RX )RU H[DPSOH D ZLGHU HQWU\ZD\\ ,PSURYHG YLVLELOLW\ $ WKLUG VHUYLFH GRRU IRU HDVLHU PDLQWHQDQFH DQG FRROHU FOHDQLQJ $QG D GHSHQGDEOH QR IXVV )LQDO 7LLHU HQJLQH <R <RX DVNHG IRU PDFKLQHV WKDW DUH RSHUDWRU IULHQGO\ S \ GHSHQGDEOH S DQG HDV\\ WR PDLQWDLQ P :H PDGH VXUH WKHH * 6HULHV GHOLYHUV 6HH IRU \RXUVHOI DW \RXU GHDOHU RU DW -RKQ'HHHUH FRP H[FDYDWRUV Featured Equipment (more available on www.jesco.us)

2015 JOHN DEERE 318E, STK# 403233, 69 HRS, JOYSTICK, CAB, 2 SPEED TRANS, AC, STD HYDRAULICS

2014 JOHN DEERE 320E, STK# 400739, 308 HRS, JOYSTICK, 2 SPEED TRANS, CAB, AC, STD HYDRAULICS, REMAINDER OF 3YR/2000 HR PTH

2015 JOHN DEERE 320E, STK# 402091, 161 HRS, JOYSTICK, CAB, 2 SPEED TRANS, AC, STD HYDRAULICS, SELF LEVEL, REMAINDER OF 3YR/2000 HR PTH

2015 JOHN DEERE 326E, STK# 403716, 55 HRS, JOYSTICK, TWO SPEED TRANS, STD HYD, CAB, AIR, REMAINDER OF 3YR/2000 PTH WARRANTY

2015 JOHN DEERE 328E, STK# 403356, 68 HRS, JOYSTICK, SINGLE SPEED TRANS, STD HYD, CAB, AC, MECH SEAT, REMAINDER OF 3YR/2000 HR PTH WARRANTY

2015 JOHN DEERE 328E, STK# 403443, 317 HRS, JOYSTICK, TWO SPEED TRANS, RIDE CONTROL, STD HYD, MANUAL QUICK-TACH, CAB, AC

2015 JOHN DEERE 328E, JOYSTICK, TWO SPEED TRANS, HI-FLOW, CAB, AC, REMAINDER OF 3YR/2000HR PTH WARRANTY

JESCO offers a large fleet of well maintained used equipment to special leasing deals that could be more cost-effective than renting. Powertrain and hydraulic warranties available on certain equipment when purchased. Contact your local sales rep for more information on ways that JESCO can save you money on used equipment.

www.jesco.us (800) 241-7070

Branch Locations: South Plainfield, NJ • Fairfield, NJ • Lumberton, NJ • Beacon, NY • Deer Park, NY Middletown, DE • Baltimore, MD • District Heights, MD • Frederick, MD • Delmar, MD • White Plains, MD


Page 4 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

®

IN THIS ISSUE

NORTHEAST EDITION Circulated Throughout • New Hampshire • Vermont • Connecticut • Rhode Island • New York • New Jersey • Delaware • Maine • Pennsylvania • Maryland/D.C. • Virginia • West Virginia • Massachusetts

To read these stories and many more, visit www.constructionequipmentguide.com

8

FEATURES 8

20

ACAA UNVEILS $1B PLAN FOR PITTSBURGH INTERNATIONAL AIRPORT

Allegheny County Airport Authority officials announced plans to reshape the future of Pittsburgh International Airport, a plan that will reduce long-term costs, benefit the traveling public and align the facility with the needs of a modern passenger experience.

14 NEW MILLENNIUM RENTALS EXPANDS ITS EXCAVATOR FLEET New Millennium Rentals, located in Florida (Middletown), N.Y., has been providing unique equipment rental solutions for the demolition, recycling, environmental and reconstruction industries since its founding in 1999.

20 THREE GENERATIONS OF HOFFMANS TOUR GEORGE HARMS JOB SITE In what is best described as an iconic moment, three generations of Hoffman leadership gathered this summer for a job tour with George Harms Construction Co. on the site of the new Route 72/Manahawkin Bay Bridge in Long Beach Island, N.J.

34 J.F. KIELY SUPERVISOR STEVEN ALLEN

125 Washington, D.C., Mayor Muriel Bowser signed a memorandum of intent to formally launch the DC Infrastructure Academy, a partnership between D.C. government and utility, union, university and private sector partners that will create a pipeline to in-demand infrastructure jobs for district residents.

62 KOBELCO TO DOUBLE PRODUCTION AT U.S. FACILITY BY 2018 Kobelco USA is continuing its commitment to providing customers with quality products from its North American excavator production facility with plans to nearly double manufacturing capacity by 2018.

34 DOOSAN BOBCAT ASSISTS WITH HARVEY, IRMA RELIEF EFFORTS Doosan Bobcat is donating more than $325,000 worth of Bobcat equipment and Doosan Portable Power light towers and generators to assist with Hurricane Harvey and Hurricane Irma relief efforts.

42 SKANSKA TOPS OUT 99M PROJECT IN D.C.’S CAPITOL RIVERFRONT Skanska has achieved the “topping out” milestone at 99M, signaling the last pour on the roof level of the concrete, 11-story, 234,000-sq. ft. Class A office building currently under construction in Washington, D.C.’s Capitol Riverfront neighborhood.

52 MAYOR BOWSER, PARTNERS FORMALLY LAUNCH DC INFRASTRUCTURE ACADEMY Founder, Publisher & CEO Northeast Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Director of Web Services.

Edwin M. McKeon Sr. Edwin M. McKeon Jr. Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz Teddy McKeon

www.constructionequipmentguide.com Editorial e-mail editorial@cegltd.com Advertising e-mail production@cegltd.com

Mobile

LinkedIn

Facebook

Twitter

72 VOLVO A60H ARTIC TRUCK MAKES ITS NORTH AMERICAN DEBUT

80 CAT 745 ARTIC TRUCK OFFERS NEXT GENERATION CAB DESIGN

DISTRIBUTION CENTER IN ATL JLG Industries Inc., an Oshkosh Corporation company and a global manufacturer of aerial work platforms and telehandlers, opened its new east coast parts distribution center in Atlanta.

106 CREWS BUILD SLURRY WALL FOR HIGH-RISE

82 ARTICULATED DUMP TRUCKS: HEAVY HAULING MADE EASY

84 JOHN DEERE EXPANDS E-SERIES LINE WITH 260E, 310E HAULERS

IN BOSTON’S GROWING SEAPORT DISTRICT The Seaport District of south Boston has experienced explosive growth over the past decade, and with the announcements of General Electric moving its headquarters and Amazon building a major facility in South Boston, the growth rate has achieved even greater levels.

125 BOON & SONS CHOOSES SDLG FOR UPSTATE N.Y. SNOW REMOVAL Located mere mi. from the city of Rochester, where average snowfalls approach 100 in. per year on a regular basis, the company is more than familiar with tough winters and the equipment needed to deal with their effects.

DEPARTMENTS 114 BUSINESS CALENDAR 132 CLASSIFIEDS 134 COMING AUCTIONS

EQUIPMENT

135 EXHIBIT TELLS TALES OF WEST VIRGINIA’S INFRASTRUCTURE An exhibit celebrating the history of West Virginia’s infrastructure is now open for viewing. The “Transportation in West Virginia” exhibit, which opened Sept. 5 at the Culture Center in Charleston, W.Va., features highlights of the

87 WIRTGEN Slipform Pavers 90 BOMAG BM 2200/75 Cold Mill 92 VOLVO SD45B Drums

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

OFF-ROAD TRUCKS

62 JLG OPENS EAST COAST PARTS

RECEIVES PATRIOT AWARD J.F. Kiely Construction Co. is honored to announce supervisor Steven Allen as the recipient of the 2017 Employer Support of the Guard and Reserve (ESGR’s) Patriot Award.

construction of 38,770 mi. of public roads through the state’s hilly terrain, the Charleston Gazette-Mail reported.

YouTube

Edwin M. McKeon Jr.

Kent Hogeboom

Ed Bryden

Bob Buckley

• New Jersey • Eastern Pennsylvania • Northern Maryland • Delaware

• New York • New England • Northern Pennsylvania

• West Virginia • Western Pennsylvania

• National • Central Pennsylvania

Toll Free Fax e-mail

215/885-2900 800/523-2200 215/885-2910 tmckeon@cegltd.com

Toll Free Fax e-mail

315/866-1423 800/988-1203 315/866-1379 khogeboom@cegltd.com

Toll Free Fax e-mail

440/268-9690 800/810-7640 440/268-9691 ebryden@cegltd.com

Construction Equipment Guide Northeast Edition (ISSN 1058-787X) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Northeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2017, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from

Toll Free Fax e-mail

518/863-4100 800/992-7116 518/863-7100 bbuckley@cegltd.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 5


Page 6 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SMALL MACHINEE. BIG ATTITUDE. The all-new G-Seeries Skid Steers and Compact Track Loader are majorrly tough customers, because tough cu ustomers like you helped deesign them. Yo Your input led to t increased durability, greater engine po ower,r, and a improved fuel cappacity. And with fewer grease zerks and extended RLO FKDQJH LQWHUYDOV VHUYLFLQJ LV HYHQ VLPSOHHU WKDQ EHIRUH $YDLODEOH LQ Ć&#x;YH Ć&#x; PRGHOV LQFOXGLQJ two radial-lift opt ptions, the G-Series can takee down the biggest gg jobs j — and yyour operating p g costs — all at the same time. To To learn l more, see your dealer or visit our website.

www.plasterer.com

We offer Deere Certified Machines for Sale ALL MACHINES HAVE CERTIFIED USED WARRANTY – 12 MONTHS PT & HYD

WHAT IS A CERTIFIED USED MACHINE? To be John Deere Certified Used, a machine must be in above-average condition with low logged hours. Select “creampuffs� are subjected to extensive total machine inspections by Deere-certified technicians. Finally, before receiving the Deere seal of approval, each machine is put through a comprehensive engine and hydraulics-performance check.

PLASTERER EQUIPMENT CO., INC. Serving Contractors, Municipalities, and Industry since 1912 LEBANON, PA

SELLERSVILLE, PA

BETHLEHEM, PA

LEWISBERRY, PA

2550 E. Cumberland St. (717) 273-2616 • (800) 225-4001

3215 State Rd. (215) 258-5700 • (800) 523-2209

400 Stoke Park Rd. (610) 867-4657 • (800) 587-9790

640 Lowther Rd. (717) 938-6568 • (866) 787-0001


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 7

631/643-2605 www.allislandequipment.com

Serving Nassau, Suffolk and the Five Boroughs since 1970

New Model 695

Introducing the new 8520.

Call us today for a demonstration and see why LeeBoy is still the leader in mid size pavers!

New Model

0% Financing on Certain Models

Come In and See Why LeeBoy is the Industry Leader for Mid Sized Pavers

®

Lowboy


Page 8 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ACAA Unveils $1B Plan for Pittsburgh InternationalAirport Allegheny County Airport Authority officials announced plans to reshape the future of Pittsburgh International Airport, a plan that will reduce long-term costs, benefit the traveling public and align the facility with the needs of a modern passenger experience. An updated design will allow for an expanded security checkpoint; the elimination of the costly train; a newly configured international arrivals process; the implementation of modern technology throughout the terminal; and an improved baggage delivery system, among other improvements. The airport opened 25 years ago as a leading-edge facility. Today, airport officials are embarking on a plan to again make the airport industry-leading. Built as a mega hub facility, the current airport finds itself built for the past — much too large in some areas and capacity-constrained in others. The centerpiece of the plan involves a Pittsburgh International Airport photo new landside terminal adjacent to the renovated airside terminal with 51 Allegheny County Airport Authority officials announced plans to reshape the future of Pittsburgh International Airport at a cost gates, a dozen more than are being of $1.1 billion. used today. The plan does not include the use of local tax dollars. The budget, based on early conceptual designs, is $1.1 billion. More detailed cost estimates will be available as the project reaches final design. The project is expected to create more than 10,000 direct and indirect jobs and produce $1.66 billion in economic activity. It also is expected to generate more than $28 million in state and local income taxes. Officials expect to break ground on the project in 2019 with anticipated completion in 2023. “This is exciting news by the airport board today, and I thank them for the work that they put into making this decision,” said Allegheny County Executive Rich Fitzgerald. “With this Pittsburgh International Airport photo Airport officials are embarking on a plan to again make the airport industry-leading. modernization of the terminal, our airport will be more efficient, there will be an enhanced customer experience, and it will be even more costcompetitive to airlines. This is a win-win for our region.” The new design will allow the airport to be optimized for modern security needs. Plans also will save the authority millions of dollars in annual operating and maintenance costs. The plan will keep airline costs stable and maintain the authority’s commitment to cost competitiveness. “I’m extremely proud to be a part of the process to help lead Pittsburgh International Airport into the future with a facility that truly serves the region’s needs while maintaining stable costs for our airline partners,” said ACAA Board Chairman David Minnotte. “The airport Pittsburgh International Airport photo see MODERNIZATION page 140

Officials expect to break ground on the project in 2019 with anticipated completion in 2023.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 9

QUALITY USED EQUIPMENT VALUE V ALUE & PERFORMANCE ASSURED

2013 CAT TL642C, 777 HRS, S/N: THG00691, STOCK #: 13R0392 ....................$81,000

2013 CASE 521F, S/N: NDF220126, STOCK #: BNDF20126, 749 HRS ................$104,000

COMPACTORS-SMOOTH DRUM 2011 CAT CB14, HOURS: 350, SERIAL NUMBER: DDT00836, STOCK NUMBER: BDTT836, GREAT SHAPE, LOW HOURS. INSPECTION REPORT AVAIL ................................................................$22,900 DOZERS - CRAWLER 2013 CAT D6N LGP, EROPS, AIR CONDITIONER, HOURS: 2,133, SERIAL NUMBER: PBA00582, STOCK NUMBER: RCPBA582 ..................................................................................................$199,000 EXCAVATORS - CRAWLER 2014 CAT 314E LCR, BLADE: 8'2", *SUPPORT, AUX LINES, R-BOOM, *CONTROL, BLADE, W/PUMP, *CHANGER, HAND CTRL 2-WAY, R-BM, *FRAME, BASE, LONG U/C BLADE, *SEAT, H-BACK, W/HEATER,S/AIR, *TRACK: 20" TG W/RUBBER PAD, *FRAME, SWING, STANDARD, *CONTROL: CENTER-LOCK COUPLER, *PANEL: STD START SWITCH, *COUNTERWEIGHT, 7,940 LBS, *LINESFRONT: STD W/CENTER-L QC, REGIONAL PKG R-BOOM (ADSD-N), *R-BOOM: 9'10" STICK HD PKG, *R-CYLINDER PKG, *LINES-HP TCS PKG (9'10" STK),*LINES-QC PKG (R-BOOM/9'10" STK, *SWIVEL: BLADE, HOURS: 1,597, SERIAL NUMBER: ZJT00656, STOCK NUMBER: 14M0218... ..$150,000 1992 CAT 325L, HOURS: 10,486, SERIAL NUMBER: 8NK00106, STOCK NUMBER: CS8NK106 ........ ....................................................................................................................................................$33,000 2011 CATERPILLAR 420EIT, HOURS: 3,514, SERIAL NUMBER: DAN01562, RIDE CONTROL, 420E BHL IT ACERT TIER 3 14FT, BATTERY, HEAVY DUTY, BELT, SEAT, 2" SUSPENSION, CAB, DELUXE W/AC, CONSISTING OF:, CONTROL, IT AUX ATTACHMENTS, COUNTERWEIGHT, 1075 LBS, E-STICK, EMISSIONS: TIER 3, HEATER, ENGINE COOLANT, 120V, HYDRAULICS, BH, 6 FUNCTION, INSTRUCTIONS, ANSI, INSTRUCTIONS, ENGLISH, LANE 2 ORDER, LOCK, VANDALISM, PARALLEL LIFT, OEP4: CAB, AC, 2 BTRY, HTR, RC, PACK, DOMESTIC TRUCK, PLATE GROUP - BOOM WEAR, POWERTRAIN,93 HP,4WD,STD SHIFT, STABILIZER PADS, FLIP-OVER, TIRES 4WD BIAS FIRESTONE, XP4: E-STK, 6 FCN, 1075 CW ..............................................................................$62,000 2001 CAT 365BL, HOURS: 11,795, SERIAL NUMBER: 9TZ00433, STOCK NUMBER: B9TZ433, COUNTERWEIGHT: REMOVAL DEVICE, *STICK: R15'4" (V), *LINKAGE: BUCKET V-FAMILY, *PEDAL: STRAIGHT TRAVEL, *BOOM: 25' 7" REACH, *GUARD: VANDALISM, *STARTING: COLD WEATHER, *DEVICE: HPC OFF ....................................................................................................................$74,000 2008 KOMATSU PC300, HOURS: 7,994, SERIAL NUMBER: A90332, STOCK NUMBER: BA90332, GOOD SHAPE, INSPECTION REPORT AVAILABLE UPON REQUEST........................................$74,000 1998 LINK-BELT LS-5800, HOURS: 8,608, SERIAL NUMBER: LE318-9736, STOCK NUMBER: LE3189736 ............................................................................................................................................$24,000 EXCAVATORS - MINI 2005 CASE CX50B, HOURS: 4,177, SERIAL NUMBER: N6TN81588, STOCK NUMBER: B6TN81588, 24" BKT, GOOD TRACKS AND MACHINE, INSPECTION AVAIL UPON REQUEST ....................$32,500 LOADER BACKHOES 2001 CAT 420D, HOURS: 2,143, SERIAL NUMBER: FDP00814, STOCK NUMBER: BFDP814 $41,000 2014 CAT 420F IT, AIR CONDITIONER, RIDE CONTROL, STICK: EXTENDED, BUCKET: GP, CONTROLS: JOYSTICK, BUCKET: REAR, COUPLER, AUXILIARY HYDRAULICS, 4-WHEEL DRIVE, ULTRA LOW SULFUR DIESEL FUEL, AM FM RADIO, HOURS: 805, SERIAL NUMBER: JWJ01919, STOCK NUMBER: 13M0616....................................................................................................................$83,000 MOTOR GRADERS 2015 CAT 12M3, EROPS, AIR CONDITIONER, ACCUMULATORS, PRODUCT LINK, LIGHTING, JOYSTICK STEERING, ULTRA LOW SULFUR DIESEL FUEL, MOLD BOARD 14' BASIC, TIRES: 17.5R25 BS VKT * D2A MP, SHANKS/TEETH: RIPPER/SCARIFIER, INSTALLATION: ACCUGRADE READY, HOURS: 162, SERIAL NUMBER: N9R00135, STOCK NUMBER: 14M0625 ..........................................$290,000

2015 CAT 972M, 4239 HRS, S/N: A8P00396 .. ..........................................$265,000

SKID STEERS - TRACK 2007 BOBCAT T190, HOURS: 2,960, SERIAL NUMBER: 531617704, STOCK NUMBER: B53161770, COMES WITH MP BUCKET AND EXTRA TRACK. INSPECTION REPORT AVAIL UPON REQUEST, EROPS, AIR CONDITIONER, BUCKET, AUXILIARY HYDRAULICS, HYDRAULICS: STANDARD FLOW..........$18,400 2013 CAT 289C2, HOURS: 1,483, SERIAL NUMBER: RTD01714, STOCK NUMBER: TRTD1714....$43,000 2014 CAT 299D, PACK: DOMESTIC TRUCK, LANE 2 ORDER, INSTRUCTIONS: ENGLISH, SEAT BELT: 2", HEATER, ENGINE COOLANT, 120V, QUICK COUPLER: ELECTRIC, RETURN TO DIG/WRKTL POSITIONER, CONVERSION ARRANGEMENT, ROPS: ENCLOSED WITH A/C (C3), RADIO READY, DOOR, CAB, POLYCARBONATE, SEAT,AIR SUSPENSION,VINYL,HEAT, BATTERY, HOURS: 903, SERIAL NUMBER: GTC01221, STOCK NUMBER: 14M0088. ................................................................$57,000 SKID STEERS - WHEEL 2014 CAT 236D, HOURS: 252, SERIAL NUMBER: BGZ00555, STOCK NUMBER: CSGBZ555$35,000 2014 CAT 246D, PACK: DOMESTIC TRUCK, LANE 2 ORDER, TIRES: 12/16.5 CAT 10PR, INSTRUCTIONS: ENGLISH, SEAT BELT: 2", HEATER, ENGINE COOLANT, 120V, QUICK COUPLER: ELECTRIC, ROPS: ENCLOSED WITH A/C (C3), COUNTERWEIGHT, MACHINE, EXTERNAL, RETURN TO DIG/WRKTL POSITIONER, PACKAGE, PERFORMANCE, (H3), HOURS: 1,077, SERIAL NUMBER: BYF00829, STOCK NUMBER: 13M0633 ....................................................................................$39,000 2015 CAT 246D, ONE SPEED, COUNTERWEIGHT,MACHINE,EXTERNAL, DISPLAY, ADVANCED, LCD, CAMERA, SEAT,AIR SUSPENSION,VINYL,HEAT, LANE 2 ORDER, CONVERSION ARRANGEMENT, INSTRUCTIONS, ANSI, USA, ROPS: ENCLOSED WITH A/C (C3), DOOR, CAB, POLYCARBONATE, RADIO READY, BATTERY, HEAVY DUTY, 850 CCA, SEAT BELT: 2", HOURS: 296, SERIAL NUMBER: BYF01550, STOCK NUMBER: 14M0413... ................................................................................$44,000 2012 CAT 252B3, *TIRES: 12X16.5 10PR CAT, *HEATER, ENGINE COOLANT, 120V, *DOOR, CAB, POLYCARBONATE, *BELT, SEAT, 2" SUSPENSION, *ENGINE:TIER4 INTERIM COMPLIANT, *CONTROL, 2SPD, PROP AUX, DLX, *252B3 SKID STEER LOADER, *ROPS: ENCLOSED WITH HEAT (C2), *QUICK COUPLER: MANUAL, *FAN, COOLING, DEMAND, HOURS: 337, SERIAL NUMBER: TNK01865, STOCK NUMBER: BTNK1865..................................................................................$35,000

Used Parts • Quality Parts • Attachments Are you looking for a reliable source for quality used components and parts? Outback Parts is linked nationwide with three used parts networks, so finding dependable parts fast and conveniently is never a problem. Outback Parts also supplies replacement parts for Non-Cat® machines. So when you’re needing parts, call or visit us on-line. Call: 732/885-3005 Fax: 908/995-7522 jmeyer@foleyinc.com

www.outbackparts.com

2015 CAT 302.4D, 502 HRS, S/N: LJ600209, STOCK #: 15M0372 ....................$27,000

2015 CAT 262D, *262D SSL TIER 4 FINAL HRC, *PACKAGE, PERFORMANCE, (H2), *HYDRAULICS, PROPORTIONAL, WT, *ROPS: ENCLOSED WITH A/C (C3), *SEAT,AIR SUSPENSION,CLOTH,HEAT, *DOOR, CAB, GLASS, *DISPLAY, ADVANCED, LCD, *QUICK COUPLER: ELECTRIC, *CONVERSION ARRANGEMENT, *RADIO READY, *SEAT BELT: 2", HOURS: 130, SERIAL NUMBER: DTB02869, STOCK NUMBER: 14M0694.......................................................................................................$44,000 2014 CAT 262D, PACK: DOMESTIC TRUCK, LANE 2 ORDER, TIRES: 12/16.5 CAT 10PR, INSTRUCTIONS: ENGLISH, SEAT BELT: 2", HEATER, ENGINE COOLANT, 120V, QUICK COUPLER: ELECTRIC, ROPS: ENCLOSED WITH A/C (C3), TWO SPEED WITH RIDE CONTROL, COUNTERWEIGHT,MACHINE,EXTERNAL, RETURN TO DIG/WRKTL POSITIONER, PACKAGE, HOURS: 764, SERIAL NUMBER: DTB00908, STOCK NUMBER: 13M0635..............................$40,000 2010 CAT 272C, CONVERSION ARRANGEMENT, BELT, SEAT, 2", ROPS: ENCLOSED WITH A/C (C3), DOOR, CAB, POLYCARBONATE, SEAT, SUSPENSION, VINYL, INSTRUCTIONS: ENGLISH, DOMESTIC TRUCK, INSTRUCTIONS, ANSI, NACD, ENGINE: TIER 3 COMPLIANT, QUICK COUPLER: HYDRAULIC, HYDRAULICS: HIGH FLOW XPS, PACKAGE, PERFORMANCE, (S4), LANE 2 ORDER, TIRES: 12X16.5 10PR CAT, HOURS: 1,388, SERIAL NUMBER: RED02135, STOCK NUMBER: BRED2135.. ....$39,000 SWEEPERS / BROOM EQUIPMENT 2010 TERRAMITE TSS48, 8 FT RIDE ON SWEEPER NO CAB KUBOTA 37 HP DIESEL ENGINE, 100 GALLON WATER TANKS, HIGH CAP HYD OIL AND FUEL TANKS, POLY AND WAFER WIRES, FUEL TANK CLEANOUT, VARIABLE BROOM SPEED CONTROL W/ DUAL DRIVE MOTORS, FULL INSTRUMENTATION, 4 WHEEL TOWING W/ TOW ALARM SYSTEM, HOURS: 3,813, STOCK NUMBER: 10R0325........................................................................................................................................$7,000 2010 TERRAMITE TSS48, 8 FT RIDE ON SWEEPER NO CAB KUBOTA 37 HP DIESEL ENGINE, 100 GALLON WATER TANKS, HIGH CAP HYD OIL AND FUEL TANKS, POLY AND WAFER WIRES, FUEL TANK CLEANOUT, VARIABLE BROOM SPEED CONTROL W/ DUAL DRIVE MOTORS, FULL INSTRUMENTATION, 4 WHEEL TOWING W/ TOW ALARM SYSTEM, HOURS: 408, STOCK NUMBER: 10R0326. ......................................................................................................................................$6,500 WHEEL LOADERS 2015 CAT 972M, ULTRA LOW SULFUR DIESEL FUEL, HOURS: 4,239, SERIAL NUMBER: A8P00396 ..................................................................................................................................................$265,000 2014 CAT 908H2, 908H2 COMPACT WHEEL LOADER, *SEAT BELT: RETRACTABLE 3", *SECURITY SYSTEM: NONE, *HARNESS, WIRING, WORKTOOL, *LIGHTS, CAB, WORKING (FOUR), *CPLR, VERT, STD FLO, PILOT, SW, *TRANS, CONTROL, UPGRADE, *TIRES: 400/70 R20 XMCL, *ANTIFREEZE: -50C (-58F), *VALVE, DRAIN, ECO, *LIGHTS: ROADING RH DRIVE DIP, *ALARM: BACK UP, *LINES,HYD,W/RIDE CTRL, STD FLO, *SOUND SUPPRESSION: STD, *PRECLEANER, *JOYSTICK,PILOT,TANDEM VLVE,RTD, *LINES,PUMP,RIDE CNTRL OR HIFLO, *AIR CONDITIONER: AND HEATER, *EXHAUST: CAB, *TRANS 22 MPH DIFF LOCK PILOT, *STEER SYSTEM: STD FLOW 22 MPH, *CAB: DELUXE, LANE 1 ORDER, SERIALIZED TECHNICAL MEDIA KIT, HOURS: 988, SERIAL NUMBER: JRD01612, STOCK NUMBER: BJRD1612 ................................................................$75,000 2014 CAT 938K, ULTRA LOW SULFUR DIESEL FUEL, HOURS: 1,120, SERIAL NUMBER: SWL02451 ..................................................................................................................................................$164,000 2012 CAT 980K, ULTRA LOW SULFUR DIESEL FUEL, HOURS: 3,432, SERIAL NUMBER: W7K01175 ..................................................................................................................................................$338,000 2015 DEERE 624K, GOOD SHAPE, JRB COUPLER, CARBODY FORKS, NEW TIRES, HOURS: 5,494, SERIAL NUMBER: 661885, STOCK NUMBER: B661885...........................................................$98,000

ASK ABOUT OUR FLEET RESTRUCTURING OPTIONS. WE CAN HELP WITH ONE MACHINE OR THE ENTIRE FLEETT.. RICH CALIFANO International & Domestic Used Equipment Sales & Purchasing

RCALIFANO@FOLEYINC.COM 732-261-8424

1-800-939-6611 855 CENTENNIAL A AVENUE VENUE PISCATA AT TA AW WAYY,, NJ 08854 WWW.FOLEYINC.COM/USED

TOM ALFANO International & Domestic Used Equipment Sales & Purchasing

TTALF ALFANO@FOLEYINC.COM 732-261-8430


Page 10 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Komatsu CARE Certified Equipment offers peace of mind. With Komatsu CARE Certified Equipment, you know exactly what you’re buying. The rigorous certification process eliminates many of the unknowns that are associated with purchasing used equipment.

• Machines are Tier 4 compliant and have 6,000 hours or less. • They have been maintained by certified technicians through Komatsu CARE. • Each includes a CARE Report of service history and complete records. • Any remaining Komatsu CARE coverage is transferred to new owner.

Check out the Komatsu CARE Certified Equipment YR YR

Make/Model Make/Model

EE# EE#

PRICE PRICE

CRAWLER CRAWLERDOZERS DOZERS 2010 1999 2015 2012 1999 2012 2008

KOMATSU D51Pi-22 C027329 KOMATSU D65EX-12 C020925 KOMATSU D51PXi-22 C019464 KOMATSU D65WX-17 C005727 KOMATSU D65EX-12 EXCAVATORS C020925 KOMATSU D65WX-17 C005727 JOHN DEERE 190DW C021549

EXCAVATORS C003281

2006 LIEBHERR A900C 2006 JCB 8080 2008 KOMATSU PC50MR-2 2008 JOHN DEERE 190DW 2011 KOBELCO KOMATSU PC138USLC-10 80CS 2015 LIEBHERR KOMATSU PC138USLC-10 2006 A900C 2011 PC138USLC-8 2015 KOMATSU KOMATSU PC138USLC-10 2015 PC138USLC-10 1995 KOMATSU KOMATSU PC150-5 1995 PC150-5 2001 KOMATSU KOMATSU PC210LC-6K 2001 KOMATSU PC210LC-6K 2016 KOMATSU PC210LC-10 2016 KOMATSU PC210LC-10 2007 KOMATSU PC228USLC-3 2013 KOMATSU PC240LC-10 2013 KOMATSU KOMATSU PC240LC-10 2013 PC240LC-10LR 2013 KOMATSU KOMATSU PC240LC-10LR 2005 PC270LC-7 2005 KOMATSU KOMATSU PC270LC-7 2014 PC290LC-10 1999 PC300LC-6 2014 KOMATSU KOMATSU PC290LC-10 2013 PC360LC-10 2014 KOMATSU KOMATSU PC290LC-10 2014 KOMATSU PC360LC-10 1999 KOMATSU PC300LC-6 2015 KOMATSU PC360LC-11 2003 KOMATSU PC300LC-7 2015 KOMATSU PC360LC-10 2013 KOMATSU PC360LC-10 $239,000 2014 KOMATSU KOMATSU PC360LC-10 1995 PC400LC-5 1995 KOMATSU KOMATSU PC400LC-5 2010 PC450LC-8 2011 PC490LC-10 2010 KOMATSU KOMATSU PC450LC-8 2012 PC490LC-10 2013 KOMATSU KOMATSU PC490LC-10 2013 KOMATSU PC490LC-10 2015 KOMATSU PC490LC-11 2015 KOMATSU PC490LC-11 2008 KOMATSU PC800LC-8 2008 KOMATSU PC800LC-8 2013 VOLVO VOLVO EC160LC EC160LC 2013

C026417

C025949 C021549 C019465 C027297 C024556 C003281 C019465 C025593 C024556 C023655 C023655 C020926 C020926 C022002 C022002 C025414 C006323 C006323 C022421 C022421 C020272 C020272 C022744 C021741 C022744

C006325 C021518 C021741 C026363 C019345 C027691 C006325 C021518 C023172 C023172 C005953 C026255 C005953 C025389 C006069

C006069 C026360 C022399 C022399 C025536 C025536

$89,000 $49,500 $189,000 $169,000 $49,500 $159,000 $49,000 $79,000 $24,500 $18,500 SOLD $49,000 $89,500 $49,000 $119,000 $79,000 $89,500 $140,000 $112,000 $29,500 $26,500 $35,000 $35,000 $169,000 SOLD $169,000 $67,500 $149,000 $149,000 $189,000 $189,000 $39,500 $39,500 $210,000 $49,000 $210,000 $159,000 $189,000 $189,000 $49,000 $239,000 $65,000 $199,000 $219,000 $19,500 $19,500 $99,000 $199,000 $159,000 $229,000 $239,000 $239,000 $310,000 $310,000 $339,000 $339,000 $119,500 $119,500

GRADERS GRADERS 1996 KOMATSU KOMATSU GD650AW-2 2005 GD655-3C 2005 KOMATSU KOMATSU GD655-3C 2008 GD655-3E0 2013 GD655-5 2008 KOMATSU KOMATSU GD655-3E0

C020907 C003433

$39,000 $89,500

C003433 C004620

$89,500 $109,000

C026535 C004620

$159,000 $139,500

YR

YR

Make/Model EE# EE# PRICE PRICE MATERIAL HANDLERS, RECYCLERS MATERIAL HANDLERS, RECYCLERS

Make/Model

1996 CATERPILLAR CATERPILLAR 350L MHMH 1996 350L 2011 FUCHS FUCHS MHL331E RHL340D 2011 2015 FUCHS FUCHS RHL340D MHL360E 2015 FUCHS MHL360E 2005 FUCHS GRAPPLE - MHL350D 1989 KOMATSU PC300MH-3 2007 SENNEBOGEN FUCHS GRAPPLE830T - MHL350D 2004 1989 SENNEBOGEN KOMATSU PC300MH-3 2007 830M 2010 830M 2004 SENNEBOGEN SENNEBOGEN 830T 2012 830M 2007 SENNEBOGEN SENNEBOGEN 830M 2014 840M 2010 SENNEBOGEN SENNEBOGEN 830M 2012

in our inventory today!

C023522 C023522

$82,500 $79,500

C026479 C022333

$249,000 $139,000

C022333 C022898

$159,000 $395,000

C022898 $379,000 $8,000 C023651 $18,500 C003670 $4,000 C005918 $49,000 C023651 C022591 SOLD$22,000 $22,500 C022032 $77,000 C005918 $49,000 C022031 $189,000 C022591 $29,000 C022592 $219,000 C022032 $77,000 C003297

WHEEL LOADERS

SENNEBOGEN 830M

C022031

2006 CATERPILLAR 924G C022174 2014 CATERPILLAR SENNEBOGEN 840M C022592 2014 980K C024033 2013 KOMATSU WA200-6 WHEEL LOADERS C022593 2003 WA250-3 C026155 2006 KOMATSU CATERPILLAR 924G C022174 1998 WA320-3 C026380 2014 KOMATSU CATERPILLAR 980K C024033 2000 C022071 2012 KOMATSU JCB 406B WA320-6 C022859 2014 KOMATSU WA320-7 C005540 2005 KOMATSU WA50 C025527 1997 KOMATSU WA380-3 C006463 2013 KOMATSU KOMATSU WA200-6 C022593 2007 WA380-6 C026617 2000 KOMATSU KOMATSU WA320-6 C022071 2012 WA380-7 C026376 2015 WA380-7 C024334 2014 KOMATSU KOMATSU WA320-7 C005540 2015 WA380-7 C024340 1997 KOMATSU KOMATSU WA380-3 C006463 2004 KOMATSU WA400-5L C023548 2015 KOMATSU WA380-7 C024334 2004 KOMATSU WA400-5 C026578 2015 KOMATSU WA380-7 C024340 2014 KOMATSU WA470-6HL C024845 2004 KOMATSU KOMATSU WA400-5L C023548 2009 WA470-6HL C027330 2014 KOMATSU WA470-6HL C024845 $119,500 2014 WA470-7 C026980 2013 KOMATSU KOMATSU WA470-7 C006216 2016 WA470-8 C026756 2012 KOMATSU KOMATSU WA480-6 C020239 2012 KOMATSU WA480-6 C020239 2008 KOMATSU WA480-6 C025316 2008 KOMATSU WA480-6 C025316 1997 KOMATSU WA500-1 C023661 1997 KOMATSU WA500-1 C023661 2008 KOMATSU KOMATSU WA500-6 C025533 2008 WA500-6 C025533 2013 KOMATSU KOMATSU WA500-7 C020552 2013 WA500-7 C020552 2000 WA600-3 C022042 2000 KOMATSU KOMATSU WA600-3 C022042

$189,000

SOLD

$47,500

$229,000 $99,500

YR Make/Model Make/Model

$27,500 $99,500 $69,500 $39,500

$139,000 $29,000 SOLD$69,000 $69,000 SOLD$69,500 $19,500 $199,000 $149,000 $199,000 $29,000 $43,500 $199,000 $59,500 $199,000 $79,000

2010 2011 2008 2011 2010 1988 2011 1996 2001 2001 2012 2006 2008 2013

EAGER BEAVER

C022758

BACKHOES, SKID STEERS

1999 2007

C008064 C025818

$12,000 $25,000 $13,000 $89,000 $4,000 $89,000 $4,000 $27,500 $25,500 $199,000 $25,000 $3,200 $309,000 $15,000

$3,500

$28,000 $39,500

C023198 C025820

$7,900 $39,500 C027090 SOLD $14,500

JOHN DEERE 410E

CRUSHING & SCREENING EQUIPMENT

TRAILERS

CEC 32”x54” JAW CRUSHER

C003725

EAGER BEAVER C022758 1997 ROGERS CR50PL OFF-ROAD TRUCKS C008064 1995 ROGERS PAYHAULER 350C C022041 1996 TAG21 C023198

$129,000

$2,500 $26,000 $39,000 $6,800

MISCELLANEOUS MISCELLANEOUS BB250B 1980 BROCE BUCYRUS ERIE 88B 1980 2008 2008 2012 2007 2012

C026616 C020922 BUCYRUS ERIE 88B C020922 CATERPILLAR RM-500 C023192 CATERPILLAR RM-500 C023192 DOPPSTADT SM720 TROMMEL C021573 CEC 32”x54” JAW CRUSHER C003725 ATTACHMENTSC021572 DOPPSTADT SM720 TROMMEL CATERPILLAR 52” EXC. BUCKET/345 C006595 ATTACHMENTS

$15,000 $187,500 $149,500 $225,000 $179,000 $129,000 $159,000

$219,000 $3,900

2012 CATERPILLAR HAMM PAD-FOOT SHELL 52” EXC.KIT/3412 BUCKET/345 C006595

$35,000

2003

$49,000

Representing These Fine Lines of Equipment: WIRTGEN • VÖGELE • HAMM • KLEEMANN • SENNEBOGEN • NPK • ALLU • JCB • DOPPSTADT • JRB • BROCE BAGELA • CARLSON • ROGERS BROS • ESCO • LABOUNTY • KOMATSU • FELLING

HAMM HD10CVV C021850 JCB 225T C020581 HAMM HD13VV C025793 MILLERS, PAVERS, ROLLERS HAMM HD+120VVHF C004069 HAMM HD10CVV C021850 HYSTER C350D C028399 HAMM HD+120VVHF C004069 HYSTER C350D C028299 INGERSOLL RAND DD130 C023319 INGERSOLL RAND DD130 C023319 VOGELE 5200-2 C026147 LEEBOY L8510T C022008 WACKER RD11A TRAILERS C026853 WIRTGEN W120CFi C026575

1997 JCB ROGERS 2014 260 CR50PL 1996 JCB ROGERS 2014 260 TAG21

$6,750

$209,000 $195,000 $319,000 $89,000 $89,000 $119,000 $119,000 $89,000 $15,000 $145,000 $139,000 $169,000 SOLD $159,000 $34,500 $39,500

PRICE PRICE

MILLERS, PAVERS, COMPACT TRACK ROLLERS LOADERS

$69,000 $24,500 $47,500

EE# EE#

YR

2009

2009

2010 2010 2000 2000 2008 2008

Not all manufacturers represented in all areas served.

2009

84” DRUM FUCHS ROTARY GRAPPLE LaBOUNTY UP20 PULVERIZER FUCHS ROTARY GRAPPLE JAW SET JRB SCRAP GRAPPLE LaBOUNTY CP60 PULVERIZER LaBOUNTY CP60 PULVERIZER LaBOUNTY HDR40 LaBOUNTY HDR40 LaBOUNTY HDR50S LaBOUNTY HDR50S NPK NPKGH4 GH4 NPK NPKGH6 GH6 NPK NPKGH15 GH15 ROCKLAND GRAPPLE

ROCKLAND BTH-D-CL HYD THUMB

$3,900 P.O.R. C022337 $7,500 C026480 $7,500 18715 $2,500 C022595 $9,500 C000879 $19,500 C000879 SOLD $19,500 C005990 $12,500 C005990 $12,500 C020273 $8,500 C020273 $8,500 C005986 $7,500 C005986 $7,500 C021137 $14,900 C021137 $14,900 C002364 $29,000 C002364 $29,000 C023173 $15,000 $7,500

Contact: Hank Ruttura • Holbrook Office

631-563-7600

DENOTES KOMATSU CERTIFIED REMARKETING USED MACHINE. DENOTES KOMATSU CARE CERTIFIED MACHINE. DEPENDING ON CERTIFIED GRADE, UNIT MAY QUALIFY FOR SPECIAL FINANCING RATE AND/OR MANUFACTURER SUPPORTED WARRANTY. PLEASE CONTACT US FOR ADDITIONAL DETAILS ON THESE OR ANY OF THE PIECES MENTIONED ABOVE.

www.ehrbar.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 11

• NEW ARRIVAL

ROGERS 65 TON DROPSIDE

No-Foot Neck, Adjustable Ride Height Twin Bag Air Lift, Night Battery, Strobes, Air Lift 4th Axle

9’ Wide x 27’ Clear Deck, Rear Frame Cutout • IN STOCK!!!

Rogers 55 ton NoFoot, Heavy Lift Package, 26' clear dropside deck, Severe Duty Outriggers, Air lift 3rd, Air lift 4th ........ ..............IN STOCK!

Rogers Custom Gentle Risers, No-Foot Neck, Paver Front, Adjustable Ramps, 275’s, Aluminum, All ABS, Battery, Strobes, 35, 50, 55 & 60 Ton IN STOCK!

Rogers TAG21XXL, 21 Ton Capacity, Premium Specs, Superior Quality, 235’s Aluminum, 7-Year Warranty, Black or Red Paint .. ............IN STOCK!

Felling FT-45-2 LP, 24’ Deck, Double Gear, 6’ Double Incline Tail, 235/75R-17.5 Tires, 38”x93” Air Ramps.................. ..........IN STOCK!

Rogers 60 Ton, CobraNeck, 2-pins, Ratchet Ride Height, 26’ deck, cut-out, R3 & R4 w/air lift, 275s, Aluminum ................ ..............IN STOCK!

NEW ARRIVAL!

Rogers 55 Ton Custom, 25' clear deck, Cutout, Adjustable Width BiFold Ramps, Reinforced Wheelcovers, 275’s, Aluminum, TwinBag Air Lift 3rd, Black or Red Paint .. ..............IN STOCK!

Rogers TAG25XXL, 25 Ton Capacity, Premium Specs, Quperior Quality, 235’s on Aluminum, Air Lift Front Axle, 7-Year Warranty, Black or Red Paint.... ..............IN STOCK!

Felling FT-50-3, 25 Ton Air Tilt, Air Ramps, 24’ + 6’ Tail ..............IN STOCK!

ASK ME ABOUT AIR RAMPS!


Page 12 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Construction Equipment & Supplies

FOR SALE OR RENT Rentals - Sales - Service - Parts - Training Introducing Our New

Product Line,

• True pilot controls • Overhead roll up door • Rear view camera • First in industry with Takeuchi Fleet Management

Takeuchi TL12V2 Track Loader

• Largest rated operating capacity in the industry • Most responsive, reliable controls in the industry

Wacker Neuson 3503 Compact Excavator

• 7,937 Lb Operating Weight • 127” Digging Depth • 143” Dumping Height • 204”L x 64”W x 95” H • 32.2HP Engine Performance

• • • • •

New ergonomic & advanced cab design Cycle time improvements of 3% - 5%! Operating weight: 47,840 lbs Max dig depth: 21’10” ft/in Bucket digging force: 34,170 lbf

Link-Belt 210X3 Excavator

We are a Full-Service Certified Dealer

• Increased load capacity & greater reach at full height • Hinge Pin Height: 81” • Operating Capacity: 1,075 lbs • Ground Clearance: 6”

Dingo TX 1000 Wide Track

0% Financing Available!*

Gehl RT210 GEN: 2 Track Loader

• IdealTrax™ Automatic Track Tensioning System • Gross Power @ rpm: 72 hp @ 2500 • Operating Capacity: 3,000 lbs.

Visit Our New Location!

Items Available for Sale or Rent!

1010 Conshohocken Rd., Conshohocken, PA 610-279-5777 Ext. 3055

Call Rich Hess

www.NorrisSales.com 668 Berlin Cross Keys Rd., Sicklerville, NJ 856-740-1400 Ext. 2005

Call Frank Kimberling


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 13

.RPDWVX¶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¶V V\VWHP MREVLWH VHWXS DQG RSWLPL]HG RSHUDWLRQ FRQVXOWDWLRQ

&RQWDFW XV WRGD\ WR OHDUQ KRZ \RX FDQ XVH WKHVH WRROV WR PRYH \RXU MREVLWH WR WKH IXWXUH

1(: 86(' (48,30(17 21 6,7( 6(59,&( 5(17$/6 /($6,1* 3$576 83*5$'(6 ),1$1&,1*


Page 14 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

New Millennium Rentals Expands Its Excavator Fleet New Millennium Rentals, located in Florida (Middletown), N.Y., has been providing unique equipment rental solutions for the demolition, recycling, environmental and reconstruction industries since its founding in 1999. Its mission has been to match excavators with highly specialized demolition fronts and attachments that are not available through traditional distribution outlets. Over the past few months, the company has expanded its inventory to meet the growing diverse needs of its customer base. Three Volvo EC480E HR high reach demolition machines were recently purchased. “These carriers offer a 93-foot vertical reach from an excavator that was specifically designed and engineered for high reach demolition work. It can handle up to a 7,700-pound demolition attachment,” said Peter Menner, New Millennium Rentals founder and owner. To meet those attachment needs, New Millennium Rentals has a large selection of Genesis hydraulic shears and concrete An LBX 350x4 with 60 ft. two-piece demo front and Genesis GXT225R processors in stock available for A Volvo 480E-HRD with 93 ft. demo front and Genesis GXT335R rotating steel shear working in NYC at the Jacob Javits Center on an rental or sale rotating steel shear demoing a hospital in northern New Jersey. interior demolition. In addition to the Volvo machines, New Millennium Rentals has added several Link-Belt 350X4 series excavators that are available with two-piece 60-ft. (18 m) high reach fronts that were designed and purpose built by New Millennium Rentals and Jewell Manufacturing. “These Link-Belt machines can handle up to 5,700-pound demolition attachments,” Menner said. “They are ideal for customers with a shortterm rental needing a compact demolition machine with 60-foot reach. The reason these machines are ideally suited for short-term rentals is that they are transportable in a single tractor trailer load.” New Millennium Rentals also has added to its Genesis steel shear arsenal, with two model GXP1500R rotating steel shear. “These are the largest shear packages mounted on 800 class excavators you can rent east of the Mississippi,” Menner said. “We made the investment into this size upon the request of our heavy industrial wrecking clients.” For more information, call 877/667-1998, or e-mail pemenner@newmillenniumrentals.com or visit www.newmillenniumrentals.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Peter Menner, president of New Millennium Rentals, has continued to invest in diversifying and expanding his fleet of specialized excavators and attachments.


T NYS CO V

T

ED

WE

ER

E

GO

RO

IP

M

C

EY

EN

TRA

W E ’V E G OT NE W YOR K S TATE C O V ERED O P EN H OUSE

‘V

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 15

U AD EQ

T H URSD AY OC TOBER 12 1 TH 201 7

PRE-RE GISTE R AT TRA CEY RO AD . C OM/ OPEN-HOUSE O 6803 MANLIU US CENTER R O AD , EA S T S YR Y A C USE, NY

REDUCED

REDUCED

Contact Jesse Welleer & Tom Collins at 8000-872-2390 or used@ @traceyroad.com


Page 16 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ELLIOTT & FRANTZ, INC. WWW.ELLIOTTFRANTZ.COM MANASSAS, VA 12051 Tac Court Manassas, VA 20109 703/257-2381

JESSUP, MD 10421 Guilford Road, Jessup, MD 20794 410/792-9134 from Washington D.C. 301/725-7394

DELMAR, DE 38420 Sussex Highway Delmar, DE 19940 302/846-3033

Promissees Kept

HARRISBURG, PA 6680 Allentown Blvd., Harrisburg, PA 17112 717/652-5430

KING OF PRUSSIA, PA 450 E. Church Road, King of Prussia, PA 19406 610/279-5200

Visit www.weaco.com to view our complete inventory 4009 Conrad Weiser Parkway • Womelsdorf, PA 19567 Phone: (610) 589-5555 • Fax: (610) 589-5350 • Email: sales@weaco.com

ABBOTTSTOWN

CARLISLE

ELIZABETH HTOWN

HALIFAX

2013 VOLVO EC160DL, 5838 Hrs, Heat, A/C, Radio, Hyd 2013 VOLVO EC160DL, 2203 Hrs, Heat, A/C, Aux Hyd, Quick Coupler, Backup Camera....................................$65,000 Backup Camera, 42" Bucket........................................$75,000

From innovative compa act track loaders to the e top-selling compact ^q\ZoZmhkl bg ma^ phke] ]% Dn[hmZ l _nee ebg^ h_ \h hglmkn\mbhg ^jnbif^gm products are designed to t help you get more done on the job site. And ghp ma^k^ l ma Z g^p Znmahkbs^] ma b ] Dn[hmZ D [ m <hglmkn\mbh < m mb g >jnbif^gm > b m ]^Ze^k ] e bg b mhpg mh lniier rhn Zg] rhnk \k^p pbma ma^ aZk]^ ^lm&phkdbg` ^jnbif^gm around. Stop in today to learn more. Your new w Kubota dealer has Zkkbo^]' E^m l `^m mh phkd'

2007 CASE CX160B, 7390 Hrs, Heat, 2006 CASE 580SM II, 4941 Hrs, Cab, 2012 DEERE 135D, Heat, A/C, Hyd A/C, Radio, Manual Thumb, 42" Bucket .... Heat, A/C, Ride Ctrl, E-Hoe, Aux Hyd, 4X4, Thumb, Aux Hyd, Pattern Changer, 36" Powershift, Excellent Tires. ........$32,500 Bucket ......................................$62,000 ................................................$52,000

Ask for Allan Herr for Municipal or Government sales programs

717-896-7002

www.messic . ks.com

© Kubota K b t Tractor T t Corporation, C ti 2017. 2017

2012 BOBCAT T750, 3696 Hrs, Cab, 2012 VOLVO ECR58, Cab, Heat, A/C, 2006 Case CX210, 5678 Hrs, Cab, Heat, A/C, Third Valve, Pattern Changer, Heat, A/C, Hydraulic Quick Attach, 78" Pattern Changer, Auxiliary Hyd, Tag Bucket ......................................$29,500 Coupler, 18" Bucket ..................$37,500 42" Bucket ................................$49,500


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 17

H.O. Penn H P n Renting M R Made Easyy


Page 18 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Voorhees, NJ 800-232-6535 Allentown, PA 800-383-8894 Portland, ME 800-325-4253 Springfield, MA 800-854-5306 Baltimore, MD 888-601-7500

Walpole/Boston, MA 800-854-5310 Scranton, PA 800-569-1400 Elkton, MD 800-544-7127

Delmarva, DE 866-486-1400 Jacksonville, FL 800-828-3055 Concord, NC 800-438-2250

HALE HAS IT!

www.haletrailer.com

New Heavy Haul Arrivals Llamé NJ para empleado qué habla español • 800-232-6355 Ext. 193

IN STOCK

New Fontaine 3+3+3 80 Ton Widespread Lowboys, Available in Flat Deck & Drop Side Deck, All Components Available, Call for More Info

New Talbert and Etnyre 65 Ton Wide Spread Capable Lowboys IN STOCK

IN STOCK

Magnitude 704 Tri-Axle • 70 Ton Capacity as 4-Axle • 3rd Axle Air Lift • 28’ Drop Side Deck • Modular Design Widespread Components Available • 4th Axle Available • Drop Side or Flat Floor 275/70R 22.5 Tires w/Steel Disc Wheels

New XL Specialized 85 Ton Light Weight Lowboy, 30’x120” Air Ride, 3+3+3 Capable, Call for more information

New East walking floors, 48' long x 102" x 13', spring suspension; Keith walking floor installed. Also available, used aluminum refuse trailer.

New Fontaine Traverse Hydraulic Tail, 48' x 102", Air Ride, 40 Ton Capacity Upper Deck Ramp, 18k Winch, Remote

New Manac 87 Cu. Yd. Hardox 450 Steel Dumps, 40'x102"x100" single point susp., barn door, 11R245 tires

New Talbert 20 Ton Tag Trailers, 21’x102”, Spring Suspension Wood Filled Ramps

New Fontaine & Talbert Dropside 55 & 60 Ton Lowboys, 26' Deck, 22.5 Wheels, Air-Ride/ Air Lift and Modular Available

New Fontaine Velocity Steel Drop Decks, 48’x102”, Air ride Spread, Bulkhead and Winches

NEW TALBERT & FONTAINE 5O & 55 TON LOW BOYS, Flat Level Deck & Raised Center, 25’ & 26’ Deck Lengths, (2) King Pin Locations, Automatic 3rd Axle Air Lifts, 275/70R 22.5, 3+1 Capability, In Stock!

New Talbert 35 Ton Lowboys 22" Deck Height, Air Ride Suspension

New Landoll Slide Axle Trailers, 50'x102", Air Ride Suspension, 20K Winch, Wireless Remote, PSI System & Dock Levelers Optional

Excellent We Rent Lowbeds Financing We Rent Walking Floors Available

www.haletrailer.com

We Rent Lowboys, Blade Trailers, Etc.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 19

EXCAVATORS

2000 JOHN DEERE 310SE (6002982), 3,700 Hrs, Cab, GP Bkt, Calcium Filled Tires ............................................................$23,500

2013 JOHN DEERE 310SK (6002980), 3575 Hrs, Cab w/AC, 3 FNC Loader w/Coupler, 18” Backhoe Bkt ..............$72,000

2013 TEREX PT30 CTL (6003754), 896 Hrs, 48” bucket, Cab w/heat, Pilot Controls, Mech Coupler, Swing out Door ..........$21,000

2006 KUBOTA U15R1 (6008882), 3525 Hrs, Open ROPS Canopy, Rubber Tracks, Quick Coupler, 18” Bkt, Aux Hyd $12,500 2014 KOBELCO 17SR (2901704), 500 Hrs, Open ROPS Canopy, Rubber Tracks, QC, 12” Bkt . . . . . . . . . . . . . . . . . . . . . . . .$22,500 2015 KUBOTA KX018-4R1 (3004738), 450 Hrs, Canopy, Work Light, 16” Bkt, Quick Coupler . . . . . . . . . . . . . . . .SOLD $24,900 2014 KOBELCO SK27SRC (2902702), 150 Hrs, ROPS Cab, Heater, Rubber Tracks 9.05”, Dozer Blade . . . . . . . . . . . . .$29,900 2013 KUBOTA U25R1T4 (6008885), 463 Hrs, Canopy ROPS, Rubber Tracks, Dozer Blade, Thumb, Quick Coupler, 18” Trenching Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30,000 2013 KOBELCO SK35SRC (2903506), 700 Hrs, Cab w/heat, AC, rubber tracks, 4 way angle blade . . . . . . . . . . . . . . . . .$33,700 2013 KUBOTA KX040-4R3A (3004658), 1,000 Hrs, Cab w/AC, Rubber Tracks, Angle Blade, QC, 24” Bkt, Hyd Thumb . .$44,900 2011 KOBELCO 70SR (2907018), 1,325 Hrs, Cab w/heat, AC, rubber tracks, 30” pin on bucket . . . . . . . . . . . . . . . . . . . . .$49,000 2013 KUBOTA U55-4R3A (3004674), 1,700 Hrs, Cab w/heat, AC, rubber tracks, angle blade, QC, 24” bucket, HYD thumb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 2013 KUBOTA KX057-4R3 (3004673), 1,350 Hrs, Cab w/heat, AC, rubber tracks, QC, 24” bkt . . . . . . . . . . . . . . . . . . . . . .$52,500 2013 KUBOTA KX080-4R3 (3004687), 1,000 Hrs, Cab w/AC, Hyd. Thumb, 30” QA Trenching Bkt, QA Coupler . . . . . . .$73,900 2014 KOBELCO 140SR (2914013), 1,200 Hrs, Cab w/Heat, AC, Steel Tracks, 36” Bkt, Hnd Cntrl Pattern Changer . . . . . .$105,000 2014 KOBELCO 140SRDZ (2914018), 1,250 Hrs, ROPS Cab, 23.6” Grouser Shoes, 36’ Bkt, Hnd Cntrl Pattern Changer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$112,000 2009 KOBELCO SK350-8 (2935001), 2,200 Hrs, Cab w/ heat, AC, Steel Tracks, 54” Bkt, Pattern Changer . . . . .SOLD $112,000 2012 KOBELCO 235SR-2 (2923512), 1,600 Hrs, Cab w/heat, AC, Steel Tracks, 42” Bkt, Pattern Changer . . . . . . . . . . . . . . .$125,000 2009 KOBELCO SK260LR (2926001), 1,400 Hrs, Cab w/ heat, AC, 42” bucket, long reach . . . . . . . . . . . . . . . . . . . . . . . .$140,000 2013 KOBELCO SK260SR (2926004), 1,900 Hrs, Cab w/Heat, AC, Steel Tracks, Hyd QC, 42” Bkt, Pattern Changer . . .$142,000 2012 KOBELCO SK350LC-9 (2935002), 2,700 Hrs, Cab w/Air, Rear View Camera, 31.5” Shoes, 1&2 Way Aux Hyd, Mechanical Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149,900

LOADER-BACKHOES

2000 JOHN DEERE 310SE (6002982), 3,700 Hrs, Cab, GP Bkt, Calcium Filled Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23,500 2013 JOHN DEERE 310K (20310537), 900 Hrs, Cab w/heat, AC, 4WD, 1.25 cu yd Bkt, 24” Backhoe Bkt, Extendahoe .$67,000

2013 JOHN DEERE 310SK (6002980), 3575 Hrs, Cab w/AC, 3 FNC Loader w/Coupler, 18” Backhoe Bkt . . . . . . . . . . . . .$72,000 2013 JOHN DEERE 310SK (20310540), 1,500 Hrs, Cab w/heat, AC, 4WD, 1.3 cu yd Bkt, 24” Backhoe Bkt, Extendahoe . .$77,000 2014 JOHN DEERE 310SK (20310546), 1,000 Hrs, Cab w/heat, AC, 4WD, 1.25 cu yd Bkt, 24” Backhoe Bkt . . . . . . . . . . .$80,000 2015 JOHN DEERE 310SL (20310551), 1,018 Hrs, Cab w/Air, No Auxiliary, 1.3 cu yd HD Bkt w/Boe, 1000Lb Front Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$92,500

DOZERS 2012 JOHN DEERE 450J LGP (2045238), 1,750 Hrs, Cab w/heat, AC, 115” blade . . . . . . . . . . . . . . . . . . . . . . . . . . . .$65,000 2013 JOHN DEERE 650K LGP (2065066), 850 Hrs, Cab w/Air, 28” Shoes, 3 Fun Control Valve, Air Suspension Seat . . . .$121,000

SKID STEER & COMPACT TRACK LOADERS 2006 CAT 287B CTL (6003773), 2,019 Hrs, Cab w/heat, high flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$20,000 2013 TEREX PT30 CTL (6003754), 896 Hrs, 48” bucket, Cab w/heat, Pilot Controls, Mech Coupler, Swing out Door . . .$21,000 2007 CASE 440CT CTL (6003767), 1,551 Hrs, Simms Cab, Pilot Controls, Mechanical Universal Coupler . . . . . . . . . . . . . . .$25,000 2009 CAT 279C CTL (6003756), 3,880 Hrs, 72” GP bucket, Cab w/AC, Pilot Controls, Hydraulic Coupler . . . . . . . . . . . . . .$29,500 2011 GEHL V330 SSL (5033001), 850 Hrs, 84” bucket, Cab w/AC, Pilot Controls, Air Suspension Seat, Self Level . . .$32,000 2015 KUBOTA SSV65 HFC (3005525), 150 Hrs, 68” Low Profile Bucket, 64 Horse Power, Hand Foot Controls, Roll Up Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32,400 2015 KUBOTA SSV75 HFRC (3005526), 250 Hrs, 74” Low Profile Bucket, 74 Horse Power, Hand Foot Controls, Roll Up Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36,500 2012 KUBOTA SVL 90-2HC CTL (3011022), 1,400 Hrs, 84” Low Profile Bucket, Cab w/AC, Pilot Controls, Hydraulic Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45,900

TRACTORS & UTILITY VEHICLES 2007 SUZUKI EIGERTM 400 HUNTER X HUNTER EDITION (6010749), 447 Hrs, Electric Winch and Plow, Salt Spreader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SOLD $2,495 2009 KUBOTA L35TLB (6005268), 2515 Hrs, 72” Pin on Front Loader .5 CU Yrd Bkt, Glideshift Transmission, Backhoe Quick Coupler, 18” Backhoe Bkt . . . . . . . . . . . . . . . . . . . . . . . . . .$16,500 2011 KUBOTA L3240HST-3 (6005233), 1,135 Hrs, Turf Tires, Front Loader, Quick Coupler, 72” Bkt . . . . . . . . . . . . . . . . .$16,995 2012 KUBOTA B26TLB (3001627), 500 Hrs, ROPS/FOPS, 18” Backhoe Bkt, Quick Coupler, 60” Loader Bkt . . . . . . . . . .$23,600 2013 KUBOTA M6060HDC (6005263), 1,190 Hrs, Cab w/Heat, Industrial Tires, Front Loader, Quick Coupler, 72” Bkt . . .$31,250

LOADERS 1991 JOHN DEERE 544E (6002977), 7,217 Hrs, Cab w/Heat, 4 in 1 Bkt Welded Closed, New Tires . . . . . . . . . . . . . . . . . . .$22,000 2015 KUBOTA R530R41 (3006503), 575 Hrs, Canopy, 74” LM Bkt, Hydr QC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,100 2010 KAWASAKI 70TMV-2 (2707005), 1,750 Hrs, 3.5 cu yds bucket, quick coupler, ride control . . . . . . . . . . . . . . . . . . .$105,000 2013 KAWASAKI 80Z-7 (2708006), 550 Hrs, Cab w/Heat, AC, 3.7CU YD GP Bkt w/BOE, Hyd QC, Ride Control . . . . .$189,500

COMPACTION & PAVING EQUIPMENT 2010 DYNAPAC LP8504-33 (4007034), 400 Hrs,21” Diameter X 33” Drum, Remote Control, Hatz Diesel Engine, Hours Meter Not Functioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,900 2010 DYNAPAC CA250D-II (4007022), 1,250 Hrs, Open ROPS Cab, 84” Smooth Vibratory Drum, Cummins Engine, Limited Slip Rear Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59,000

ARTICULATED DUMP TRUCKS 2013 BELL B35D (4003502), 2,000 Hrs, Cab w/AC, Mercedes Diesel Engine, 35 Ton Capacity, Allison Trans, 26.5X25 Radial Tires, Tailgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$279,000

MISCELLANEOUS 72” ARP25 LANDSCAPE RAKE (6010737), 3 Point Hitch Mount, Manual Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$500 JOHN DEERE MP BUCKET (6010734), For John Deere 310B/Older . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SOLD $500 JOHN DEERE 92” MP BUCKET (6010733), For John Deere 310S/410 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,000 JOHN DEERE 92” MP COUPLER BUCKET (6010746), For John Deere 3105 or 410 Couplers . . . . . . . . . . . . . . . . . . . . .$2,995 2015 KUBOTA M SERIES TIRES (6010720), 2 AMR8532 rear tires, 2 AMR8993 front tires . . . . . . . . . . . . . .$3,950 2003 RAYCO RG1625A SUPER JR (6009719), 794 Hrs, Stump Grinder, 6.5 Gallon Fuel Tank, 25 HP Kohler Command OHV VTwin Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6,000 2012 RANSOME GRAPPLE (5801820), 36” grapple bucket for Kobelco 170 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7,500 2004 EAGER BEAVER 20XPT RED TRAILER (6007684), 21’ Deck, 6’ Tail, 6’ Ramps . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8,900 2001 EAGER BEAVER 20XPT BLACK TRAILER (6007685), 19’ Deck, 6’ Tail, 6’ Ramps . . . . . . . . . . . . . . . . . . . . . . . . . .$8,900 2010 CONTEQTEC AP600HD (5805264), Cold planer, 24” drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,900 2014 LAND PRIDE 6010 LP AMF4216 FLEX MOWER (6010743) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14,000 2010 KENT KF12QT (5808415), 2000 Lb Hammer . . . .$15,000

For pictures and our complete inventory of new and used equipment visit www.HarterEquipment.com

2009 CAT 279C CTL (6003756), 3,880 Hrs, 72” GP bucket, Cab w/AC, Pilot Controls, Hydraulic Coupler ..............................$29,500

! ! !

! ! ! !


Page 20 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Three Generations of Hoffmans Tour George Harms Job Site In what is best described as an iconic equipment in 1978. Watters loves the MLC moment, three generations of Hoffman lead- 300, noting that it offers customers the best ership gathered this summer for a job tour capacity to weight ratios and capacity to with George Harms Construction Co. on the invested capital of any crawler in the indussite of the new Route 72/Manahawkin Bay try. Bridge in Long Beach Island, N.J. Harms Construction is a large, New Jersey-based contractor that This long relationship specializes in bridge construction, highway construction, foundation was strengthened again work, and pipeline construction. While G. Harms Company has been recently when GHC took a loyal Manitowoc user since the of its largest early 1990s, Hoffman Equipment delivery and Harms Construction began busi- crawler crane to date...the ness together in 2002 when Hoffman became the dealer of Manitowoc in Manitowoc MLC300. New York and New Jersey. This long relationship was strengthened again recently when GHC took Former presidents Joe Watters (80 years delivery of its largest crawler crane to date young), who was president from 1978-2002, (L-R): Kevin Harms of GHC; Joe Watters, former president of Hoffman Equipment and the most technologically advanced and uncle, Harry Hoffman (93 years young), (1978 to 2002); Harry Hoffman, former president of Hoffman Equipment (1961 to 1978); Tim Watters, president of Hoffman Equipment (2002 to present); and Jason crawler crane available — the Manitowoc who was the president of the company from MLC300. 1961-1978, have heard so much from Tim Hardell of GHC. This crane has a 330-ton about the crane that they wanted to see it for capacity and utilizes themselves. Manitowoc’s VPC technolSo, on a beautiful, sunny day in July all ogy to enhance lift capaci- three generations of company leadership visties and reduce operating ited the site where crews were and were weight. The new crane had given a thorough site tour by Kevin Harms just been delivered to the and Jason Hardell of George Harms Rt. 72 job when Hoffman Construction Co. As the crane is located in leadership caught up with it the middle of Barnegat Bay, the tour was for a look-see. conducted aboard a Harms workboat on the Current President of site. Not only were the former presidents Hoffman Equipment, Tim impressed by the crane, they also enjoyed Watters, carries a predispo- sharing industry “war stories” with the relasition for cranes, probably a tive youngsters. result of Hoffman’s history (This story also can be found on as a crane and rigging com- Construction Equipment Guide’s webpany before becoming a site at www.constructionequipmentdistributor of construction guide.com.)

Manitowoc MLC300 crane on the site of the new Manahawkin Bay Bridge in Long Beach Island, N.J.

Three generations of Hoffman presidents on GHC workboat. (L-R): Harry Hoffman, Tim Watters and Joe Watters.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 21

2008 Link-Belt HTC8690 140’+58’, Two winches, 40-Ton Block, 8.5-Ton Ball, Aux Sheave, CAT C-13 445HP, ABS Drum Brakes, Cruise Ctrls, LCF Composite Cab, stk9023 $449,500

2000 Link-Belt RTC8030II, 91’+25’, Block, Ball, One Winch, stk9503 ..................................................$109,500

2010 National 9105H, 105’+44’, Ball, SFO, Joystick, Ctrls, Out & Down O/R, Internal A2B Wire, International 7600SBA, New MaxForce Engine, 20K/40K, stk9158 ........ ..........................................................................$149,500

2003 Grove TMS900E, 90 ton, 142’+56’, two winches, 35-ton block, ball, hyd luffing jib, hyd tilting cab, Cummins ISM 450HP, stk8397 ..........................$299,500

1997 Link-Belt HTC8670, 115’+61’ Two Winches, Block, Ball, Aux Sheave, Greer RCL & A2B, Detroit Series 60 365HP, Jake Brake, stk4175 ..............................$199,500

2010 National NBT45, 127’ Boom, Ball, AC Upper, SFO, Tandem + Tag, Eaton Fuller, Peterbilt 365, 380HP, stk8845 ..............................................................$289,500

Terex R265T, Heat and A/C, 2-Speed, 74” Bucket, 18” Rubber Tracks, stk8610........................................$65,275

2016 National 8100D, 100’ 4-Section Boom, Calibration for Jib, 22’ Super Duty Wood Bed, SFO, Peterbilt 348, Paccar PX9 Engine, Electronic Throttle, stk9092 .............. ..................................................................Call for Pricing

2008 National 9103A, 103’+44’, SFO, Ball, 22’ Steel Deck, Sterling LT9513, MBE 450HP, Eaton Fuller, stk5550 ............................................................................ $99,500


Page 22 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 23

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees OFF ROAD HAULERS

COMPACTORS

CRANES

Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . .$15,500 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 IR SD100D Pro-Pac Vibratory Compactor, 1999, off work), work ready . . . . . . . . . . . . . . . . . .$127,500 Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom Hydrostatic trans 84" smooth drum, drum drive . . . . . Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 IR SD105DX, 2002, 84" drum drive, OROPS, very clean Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25,

AIR COMPRESSORS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500 A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL IR SD105DX, 2002, 84" drum, OROPS, clean $69,500 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, SPECIALS IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500 P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a towIR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, type, (4) MH lights, excellent . . . . . . . . .From $5,200 ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 approx 7,000 hrs, good condition . . . . . . . .$147,500 Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000 P/S trans, working everyday on jobsites . . . .$87,500

BACKHOES

Case 580L Rubber Tire Loader Backhoe, 1997, Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000 P/S trans, 26 cy, working everyday on jobsites . . . . . . (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000 DRILLS work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, John Henry Drill Mtd on Cat 320N, 1994, 24' mast, Rammax Walk Behind Rollers, over 25 in stock, lever 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . Duraquip dust collection . . . . . . . . . . . . . . . .$125,000 & remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 MISCELLANEOUS

(8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500

CRAWLER TRACTORS

(2) Balderson Broom Attachment for Cat IT Machines, (2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, 8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. HYDRAULIC EXCAVATORS winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea. NUMEROUS Rivinius R600’s, 10’ Wide, Mount on JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick cou- (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea. ATTACHMENTS

Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500

MOTOR SCRAPERS

Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Cat 613C Water Wagon, 1994, 5000 gal drop tank, Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 (5)

Komatsu

PC128UU,

1996,

offset

boom, Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good

rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALL condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice coupler, plumbed, 8’6” width, nice, work ready . .CALL

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL

Volvo EC460B LC, 2003, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing good con-

TRUCKS & TRAILERS

dition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$100,000 (2) 48' Box Vans w/Liftgates, Good Condition . .CALL

BUCKETS Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Others Available Call Prices Are Negotiable - At Your Inspection All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.


Page 24 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The recent event in France was the first time that Mecalac’s dealer network saw the Terex TLB890 tractor loader backhoe in its Mecalac form.

Terex side dumps were presented in the Mecalac color scheme when they were presented to dealers at their event in France.

Mecalac’s U.S. Distribution Network Continues to Grow MECALAC from page 1

The MWR Series The company’s innovative recently unveiled its new MWR approach to construction design conSeries at ConExpo 2017, an interesttinued in 2017 when it launched the ing and highly productive combinanew MWR Series, a compact tion of a wheel and crawler excavawheeled excavator, in May 2017. tor. “For Mecalac, there are no small Mecalac’s distribution network or large, new or old markets,” said has grown, too, outside of the sixMarchetta. “For us, there are simply state New England region, with dealindividual customers. With expectaers now located in Pennsylvania, tions that we are looking to fulfill. North Carolina and Georgia. We weigh up our international development choices not in terms of an Who (and What) immediate profitability ratio but in Is Mecalac? light of the long-term view that has “Anticipating technological develalways driven our business, whose opments and changes to working primary focus has always been peopractices is part of our DNA,” said ple. We’re not ‘setting out to conquer Henri Marchetta, chairman, who The Mecalac TV1200 asphalt roller as it was presented to the America’ but continuing to be what founded the Mecalac Group in 1974. dealers at a recent event in France. we’ve always been: entrepreneurs “Talking to our customers, drivers, Henri Marchetta (L), chairman who listen, people who look for simsite managers, fleet managers and and founder of the Mecalac mechanics helps us to understand people’s needs today and allows the operator to switch out to attach- Group, and his son, Alexandre plicity and relevance and above all, people who are loyal to our vision their expectations for the future. That’s how we develop our ment for digging, ditching, skid buckets, Marchetta, vice chairman. and values.” forks, handling plates and more, in seconds. technologies and produce our innovations.” The MWR Series consists of verAuxiliary hydraulics permit the use of stansatile and ultra-stable machines with XS dimensions and XL dard hydraulic attachments, including hammers, augers, cutThe MCR Series lifting force, benefiting from the latest internal and external ters and more. It started in the United States with the MCR Series, which All models have an over terrain speed in excess of 6 mph technology patented by Mecalac (boom with integrated offcombines the features of a skid steer loader, a compact excavator and a telehandler and integrates them with a unique, (9.7 km). The process of changing from excavator mode to set, cylinder coupling, CONNECT quick coupler, central skid steer mode is as simple as turning a switch inside the control selector, and speed control function). versatile boom. The MWR boasts an offset articulated arm (which fits into cab. The Mecalac all-terrain skid excavator can mount a skid the machine’s profile perfectly) and forms a positive mass Mecalac offers three models of its skid excavator: steer bucket, perform all of the functions of a skid steer/track and a natural counterweight, thus optimizing its lifting power • 6MCR — 12,600 lbs. (5,715 kg) 75 hp (55.4 kW) loader and lift and load materials to a pile or truck as high as and ensuring greater freedom to handle and turn with heavy • 8MCR — 15,900 lbs. (7,212 kg) 75 hp (55.4 kW) 16 ft. (5 m), due to Mecalac’s versatile boom with integrated loads. • 10MCR — 20,700 lbs. (9,389 kg) 75 hp (55.4 kW) high reach offset. The boom folds to 131 degrees, offering The new MWRs transform worksite maximum stability and lifting performance. logistics due to its incredible stability in any The MCR can fully rotate while carrying a position and on any terrain. Whatever the load up to 40 percent of its own weight. It also For coverage of Mecalac’s dealer meeting and press event conditions, the machines stay balanced both adapts well to unstable surfaces, can work on when travelling in transfer operations in Annecy, France, where the company unveiled its new platforms in loader mode and gives the operabetween sites, as well as during work phases. MWR series compact wheeled excavator, see page 44. tor a 360-degree view of the surroundings. see MECALAC page 28 Mecalac’s Connect quick-coupling system


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 25

Fuell saving F i gs meets pow wer. Kubotta KX040-4

Now you can rent it all! Kubota’s KX040 with EcoPlus — an eco-friendly friendly compa compact excavator that combiness fuel economy with serious power. Switch between etween 9 perce fuel savings in eco-modee and back to full power quickly and easilyy. Feel the power of the KX040-4 at your Kub bota Orange Rental dealer today.

www.kubota.com *For complete warraanty, safety and product information, consult your loocal specifications are based on various standards or recommended practicces. Optional equipment nt may be shown. © Kubota Trractor Corporation, 20116

SALES • RENTALS • PARTS • SERVICE • TRAINING

www.pbeinc.com

Pine Bush Equipment Co, Inc.

Holmes, NY Branch

East PBE, Inc.

97 Route 302 Pine Bush, NY 12566

24 Sybil Court Holmes, NY 12531

283 Pane Road Newington, CT

Phone: (845) 744-2006 Call Karie (ext 1230)

Phone: (845) 878-4004 Call Damien (ext 2215)

Phone: (860) 665-7470 Call Lisa (ext 9232)

Our Holmes, NY Branch is a NAPA Auto Parts Location


Page 26 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2013 CATERPILLAR 740B ARTICULATED TRUCK, Stock #: UP15803 SMU/Hrs: 3,408, CAB, AIR CONDITIONING; RETARDER; TAILGATE; 29.5R25 TIRES ......................................$ 389,000

2014 CAT 815F II SOIL COMPACTOR, Stock #: UP16000 SMU/Hrs: 1,380, CAB, AIR CONDITIONING; RETARDER; BLADE WITH TILT ............ ................................................................$430,000

2007 CAT CB224E ASPHALT ROLLER, Stock #: UT16016 SMU/Hrs: 1,110, 47IN VIBRATORY DRUMS; SPRAY SYSTEM ......................$23,000

2014 CAT CP56B VIB SOIL COMPACTOR, Stock #: UP16081 SMU/Hrs: 2,323, EROPS, AIR CONDITIONING; VIBRATORY, PADFOOT DRUM; LEVELING BLADE; 23.1-26 TIRES ..............$115,500

2011 MOROOKA MST-1500VD DUMP TRUCK, Stock #: UT16060 SMU/Hrs: 2,071, CAB, AIR CONDITIONING; 28IN RUBBER TRACKS; STEEL ROLLERS; FOLD DOWN SIDE RAILS...... ..................................................................$88,000

2004 CAT 14H MOTOR GRADER, Stock #: UP15821 SMU/Hrs: 7,156, HIGH PROFILE CAB; AIR CONDITIONING; PUSH BLOCK; 16FT MOLDBOARD; BLADE LIFT ACCUMULATORS; RIPPER/SCARIFIER; 20.5R25 TIRES ..$175,000

2006 BOBCAT T300 MULTI-TERRAIN LOADER, Stock #: UT15918 SMU/Hrs: 2,680, CAB, AIR CONDITIONING; 1 SPEED TRAVEL; HIGH FLOW HYDRAULICS; ELEC CONTROL FOR IMPLEMENTS; BUCKET; 17.5IN RUBBER TRACKS ...... ..................................................................$29,000

2016 CAT 272D2 SKID STEER LOADER, Stock #: UP15933 SMU/Hrs: 138, CAB, AIR CONDITIONING; 2-SPEED TRAVEL; HIGH FLOW HYDRAULICS; MANUAL COUPLER; BUCKET .... ..................................................................$67,000

2015 CAT TL1055D TELEHANDLER, Stock #: UT15650B SMU/Hrs: 427, CAB, AIR CONDITIONING; 4WD; 3PC BOOM, HYDRAULIC COUPLER; 400/75-23 TIRES; FORKS; MATERIAL HANDLING ARM ............................................$152,000

2015 305ECR HYDRAULIC EXCAVATOR, Stock #: UT15582 SMU/Hrs: 989, TIER IV ENGINE; CAB, AIR CONDITIONING; AUXILIARY HYDRAULICS; SWING BOOM; 6FT STICK; MANUAL QUICK COUPLER; BUCKET............$62,000

2013 CAT 324EL LONG REACH EXCAVATOR, Stock #: UP16131 SMU/Hrs: 3,407, CAB, AIR CONDITIONING; BUCKET; 31IN SHOES .............. ................................................................$185,000

2008 CAT 328DLCR HYDRAULIC EXCAVATOR, Stock #: UP15698 SMU/Hrs: 4,297, CAB, AIR CONDITIONING; COLD WEATHER START; PATTERN CHANGER; 10FT 6IN STICK; CB2 LINKAGE; BUCKET; 24IN TG TRACKS ........$195,000

2011 CAT 349EL HYDRAULIC EXCAVATOR, Stock #: UT15963 SMU/Hrs: 6,921, CAB, A/C; TRAVEL STRAIGHT PEDAL; CHANGER, HAND CONTROL 2-WAY; 1PC BOOM, 12FT 10IN STICK; TB LINKAGE; COUNTERWEIGHT REMOVAL; 36IN TG TRACKS ................$210,000

2010 CAT 963D TRACK-TYPE LOADER, Stock #: UP15915 SMU/Hrs: 6,441, EROPS, AIR CONDITIONING; V-LEVER TRANS CONTROL; GP BUCKET; SYSTEM ONE UC; 22IN TRACKS ........ ................................................................$145,000

2011 CAT D6T XL TRACK-TYPE TRACTOR, Stock #: UP16098P SMU/Hrs: 1,398, EROPS, AIR CONDITIONING; DIFF STEERING; RIPPER CONTROL IN CAB WITH LINES; SU BLADE, SINGLE TILT; DRAWBAR; SYSTEM ONE UC; 24IN SHOES ..........................................$240,000

2012 CAT D8T TRACK-TYPE TRACTOR, Stock #: UT14398 SMU/Hrs: 10,515, TIER IV C-15 ENGINE; EROPS, AIR CONDITIONING; DIFF STEERING; SINGLE TILT; SS RIPPER; STANDARD SALT UC; 24IN SHOES ..............$375,000

2013 CAT 906H COMPACT WHEEL LOADER, Stock #: UP15773 SMU/Hrs: 2,220, CAB, AIR CONDITIONING; THIRD VALVE; JOYSTICK; HORIZONTAL NON-SSL STYLE COUPLER; GP BUCKET; FORKS ....................................$57,000

2014 CAT 908H COMPACT WHEEL LOADER, Stock #: UT16134 SMU/Hrs: 1,360, EROPS, AIR CONDITIONING; WHEEL STEERING; COUPLER, VERT, STD FLO; GP BUCKET; 405/70 R20 TIRES ................................................$68,500

2013 CAT 966K WHEEL LOADER, Stock #: UP15962 SMU/Hrs: 4,444, EROPS, AIR CONDITIONING; AUTO SHIFT; REAR CAMERA; COLD START PACKAGE; JOYSTICK STEERING; RIDE CONTROL; FUSION COUPLER; GP BUCKET; 26.5R25 TIRES ......................................$265,000

2013 CAT 980K WHEEL LOADER, Stock #: UP15961 SMU/Hrs: 5,288, EROPS, AIR CONDITIONING; 2V HYDRAULICS; AUTOLUBE; ROADING FENDERS; COUNTERWEIGHT; BUCKET; 29.5R25 TIRES ......................................$320,000


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 27

USED PAR ARTS

THE BEST VAL ALUE AND BE EST SELECTION OF CAT® PA ARTS & CO OMPONENTTS

CLEVELAND BR ROTHERS PROVIDES ALL YOUR Y USED PARTS AND EQUIPMENT QUIPMENT NEEDS

2315275/61395 Good used angle Blade for 257

3341764/58556 D6TXW angle blade good used CATERPILLAR 988F I,988F II, Arm, Used, 4E7522/63584 CATERPILLAR 930G, Arm, Used, 2357301/67960 CATERPILLAR IT28G, Arm, Used, 1133727/73616 CATERPILLAR 980G,980H, Arm, Used, 1157044/68123 CATERPILLAR 980H, Axle, Rebuilt, 2327558/34667 CATERPILLAR 950G,962G,IT62G, Axle, Used, 1383121/35700 CATERPILLAR 930G, Axle, Used, 2677380/71827 CATERPILLAR 980G, Axle, Used, 1079680/71963 CATERPILLAR 988H, Axle, Used, 1378832/68732 CATERPILLAR 980G, Axle, Used, 1080060/68119 CATERPILLAR D6N, Blade, Angle, Used, 3593410/56510 CATERPILLAR D6T LGP, Blade, Angle, Used, 2940812/72076 CATERPILLAR 257,257B,257B2,257B3,257D, Blade, Angle, Used, 2315275/61395 CATERPILLAR D6T XW, Blade, Angle, Used, 3341764/58556 CATERPILLAR D8R,D8R II,D8T, Blade, Angle, Used, 3377119/78043 CATERPILLAR D6T XL, Blade, Angle, Used, 3527618/66974 CATERPILLAR CS-573E, Blade, Other, New, 2238997/65870 CATERPILLAR 314, Blade, Other, Used, 3387943/51608 CATERPILLAR 314D LCR, Blade, Other, Used, 2824578/62303 CATERPILLAR D7E, Blade, SU, Used, BL400 CATERPILLAR D9L, Blade, U, Rebuilt, 9J7420/42578 CATERPILLAR 420D, Booms, Used, 1839140/73275 CATERPILLAR 325D, Booms, Used, 2343799/50540 CATERPILLAR 311,312, Booms, Used, 5I3412/54544 CATERPILLAR 988G,988G II,988H, Booms, Used, 2318178/75933 CATERPILLAR D6K LGP, Booms, Used, MS2080 CATERPILLAR 345B, Booms, Used, 1271409/71069 CATERPILLAR 305.5,305.5D CR, Bucket, Ditch Cleaning, Used, 700068060/60885 CATERPILLAR 345B, Bucket, GP, Used, 1458066/68565 CATERPILLAR 420F, Bucket, GP, Used, 3377388/51594 CATERPILLAR 953,953 LGP,953A,953B,953B LGP,953C,953C II,953C LGP,953D, Bucket, GP, Used, 1098156/78252 CATERPILLAR 320,320B,320C,322, Bucket, GP, Used, BU3767 CATERPILLAR 345B,345BL, Bucket, GP, Used, BU3768 Bucket, GP, Used, 980test CATERPILLAR 216,216B,216B2,216B3,226,226B,226B2,226B3,228,232,232B,232B2,232B3,236 ,236B,236B2,236B3,236D,242,242B,242B2,242B3,242D,246,246B,246C,246D,24 7,247B,247B2,247B3,248,248B,252,252B,252B2,252B3,256,256C,257,257B,257 B2,257B3,257D,259D,259B,259B3,262,262B, Bucket, Other, New, THSB/56740 CATERPILLAR 324D,324E,326FL,328D LCR,329D,329EL,329FL, Bucket, Other Used, BU8344 CATERPILLAR 324D,324E,326FL,328D LCR,329DL,329E,329FL, Bucket, Other New, BU3843 CATERPILLAR 330D, Bucket, Other, Used, BU3752 CATERPILLAR 992C,992D, Bucket, Rock, Used, 5V5601/60577 CATERPILLAR 988B,988F, Bucket, Rock, Used, 9V0219/60984 CATERPILLAR 988G,988G II,988H, Bucket, Spade Nose, Used, FB1090 CATERPILLAR 988G, Cab, EROPS, New, 1289664/29291 CATERPILLAR D10, Cab, EROPS, Used, 3T8106/36149 CATERPILLAR 777D, Cab, EROPS, Used, 1674447/74762 CATERPILLAR 930G, Cab, EROPS, Used, 2356906/67959 CATERPILLAR D6N, Cab, EROPS, Used, 2704810/76700 CATERPILLAR D8R, Cab, EROPS, Used, 1196724/71447 CATERPILLAR 992C,992D,690B, Cab, EROPS, Used, 9V5306/30599 CATERPILLAR 980G, Cab, EROPS, Used, 1097922/47687 CATERPILLAR D9R,D10R,D11R, Cab, EROPS, Used, 1118549/50331 CATERPILLAR D350E, Cab, EROPS, Used, 7U4400/40232

1778205/78152 24" 315C Bucket good used

CATERPILLAR 325B,325BL,325BLN,330B,330BL,330BL LR,330BLN,345B,345B II,345B LC,345BL,345BL II, Cab, EROPS, Used, 1276516/75461 CATERPILLAR 325B,325BL,325BLN,345B,345BL, Cab, EROPS, Used, 1516714/69568 CATERPILLAR D6T, Cab, EROPS, Used, 1587696/72079 CATERPILLAR 992C,992D, Cab, EROPS, Used, 2V5075/46948 CATERPILLAR 980G, Cab, EROPS, Used, 1097922/65276 CATERPILLAR D6T XW, C-Frame, Used, 3341767/66973 CATERPILLAR D5K2,D3K,D3K LGP,D3K XL,D3K2,D4K2, Counterweight, Used, 2568796/76136 CATERPILLAR D8R,D8R II,D8R LGP,D8R LGP II,D8T,D8T LGP, Counterweight, Used, 6Y0610/74832 CATERPILLAR 314D LCR, Counterweight, Used, 3374888/62291 CATERPILLAR 980G, Counterweight, Used, 1146030/65810 CATERPILLAR D10R, Counterweight, Used, 6T3584/62617 CATERPILLAR 924K, Coupler / Quick Coupler, Used, 3336550/58732 CATERPILLAR 305CR,305D CR,305E CR,305E2 CR,305.5Coupler / Quick Coupler, New, 3611097/76152 CATERPILLAR 930K, Coupler / Quick Coupler, Used, 3336551/78029 CATERPILLAR 953,953 LGP,953B,953B LGP,953C,953C LGP,953DCoupler / Quick Coupler, Used, 2407867/78253 CATERPILLAR 336D,330D, Coupler / Quick Coupler, New, 336QCT/77452 CATERPILLAR 938K,938M, Coupler / Quick Coupler, New, 3498040/78268 CATERPILLAR IT12,IT12B,IT12F,IT12F II,IT14,IT14B,IT14D,IT14F,IT14G,IT14G2,IT18,IT18B,IT18F,IT24,IT24B,IT24F,IT24 G,IT25B,IT28,IT28B,IT28C,IT28F,IT28G,IT28L, Coupler / Quick Coupler, Used, BRK886 CATERPILLAR 928HZ,930G,930H, Coupler / Quick Coupler, Used, 2357451/55382 CATERPILLAR 924K, Coupler / Quick Coupler, Used, 3336551/69041 CATERPILLAR 5230,5230B,5230B FS, Cylinder, Boom/Lift, Used, 1393788/72191 CATERPILLAR 824C, Differential, Used, 4V1073/31078 CATERPILLAR 824C, Differential, Used, 3V4030/31079 CATERPILLAR 740, Differential, Used, 1540300/37138 CATERPILLAR 836C, Differential, Rebuilt, 1367631/55993 CATERPILLAR 992C,992D, Differential, Used, 6W7420/59790 CATERPILLAR 988F I, Differential, Used, 4E1989/43628 CATERPILLAR 988F, Differential, Used, 4E1990 CATERPILLAR 330D,330DL, Engine, Rebuilt, 2401861/68290 CATERPILLAR 962G, Engine, Rebuilt, 1168671/34551 CATERPILLAR 769D, Engine, Rebuilt, 1230206/32272 CATERPILLAR D11R, Engine, Used, 1008111/62564 CATERPILLAR 315C, Engine, Used, 1981441/72823 CATERPILLAR D6N LGP, Engine, Used, 2421399/76431 CATERPILLAR D6H,D6H II, Engine, Rebuilt, 7C0501/65537 CATERPILLAR 777C, Engine, Rebuilt, 7E9078/36720 CATERPILLAR 980H, Engine, Rebuilt, 2250992/55693 CATERPILLAR 345B, Engine, Used, 1382001/37356 CATERPILLAR D8R, Engine, Rebuilt, 2225432/69920 CATERPILLAR D11R, Equalizer Bars, Rebuilt, 2072684 CATERPILLAR D7H, Equalizer Bars, Rebuilt, 1414690/28344 CATERPILLAR D6R, Equalizer Bars, Core, 2012078/38992 CATERPILLAR D11N, Equalizer Bars, Rebuilt, 2072683 CATERPILLAR 307E2, Final Drive, New, 1026548/70872 CATERPILLAR D6H, Final Drive, Rebuilt, 7G5532/73228 CATERPILLAR D11R,D11T Final Drive, Rebuilt, 3242343/46124 CATERPILLAR 322B,322B LC,322B LR,322BL,322BL LR,322BLN, Final Drive Rebuilt, 1141488/61170 CATERPILLAR 345B, Final Drive, Rebuilt, 1362847

4V1073/31078 Differential 824C Good used

CATERPILLAR 980G, Final Drive, Rebuilt, 1605585/8037 CATERPILLAR 980K,980M, Final Drive, New, 3715138 CATERPILLAR 988F,988F I, Final Drive, Used, 4E2664/43974 CATERPILLAR IT12,IT12B,IT12F,IT12F II,IT14,IT14B,IT14D,IT14F,IT14G,IT14G2,IT18,IT18B,IT18F,IT24,IT24B,IT24F,IT24 G,IT25B, Fork, Log/Lumber, Used, ITFORK/78340 CATERPILLAR 938K,950K,962K, Fork, Pipe/Pole, Used, FA1074 CATERPILLAR 345B, Grapple, Scrap/Salvage, Used, GA120 CATERPILLAR 311, Hydraulics, Rebuilt, 4I7603/54757 CATERPILLAR 5130, Other, Used, 1072940/326 CATERPILLAR D6R LGP, Other, Rebuilt, 8E5273/38926 CATERPILLAR D10R, Other, Used, 1157395/44976 CATERPILLAR AP-1000E,AP-1055E, Other, New, 2518303/53371 CATERPILLAR 5130, Other, Used, 1554102/32845 CATERPILLAR 259D,279D,289D,299D, Other, Used CATERPILLAR 259D,279D,289D,299D, Other, Used, 3041894 CATERPILLAR D6K2, Ripper, New, 3951786/74013 CATERPILLAR D6N XL, Ripper, Used, 3215607/78053 CATERPILLAR 311, Swing Drive, Used, 7I7761/57080 CATERPILLAR 330B,330BL, Swing Drive, Rebuilt, 1141305/32317 CATERPILLAR 824B,836,836C, Torque Converters, Rebuilt, 1431234/56095 CATERPILLAR D8R, Torque Converters, Core, 1103391/71477 CATERPILLAR D11T, Torque Converters, Core, 1210028/59566 CATERPILLAR D8R II, Torque Converters, Rebuilt, 1613306/65016 CATERPILLAR D10R, Torque Converters, Rebuilt, 2267609/64986 CATERPILLAR D6T, Torque Converters, Rebuilt, 2697635/72219 CATERPILLAR 988H, Torque Converters, Rebuilt, 1285303/52676 CATERPILLAR 773B, Torque Converters, Used, 6T4674/42945 CATERPILLAR D6N LGP, Torque Converters, Rebuilt, 1880502/44386 CATERPILLAR 970F, Torque Converters, New, 1463329/43970 CATERPILLAR 988F, Torque Converters, Rebuilt, 8E7009/64425 CATERPILLAR 776B,776D,777C,777D, Torque Converters, Rebuilt, 8E8999/74015 CATERPILLAR 776B,776D,777C,777D, Torque Converters, Used, 8E8999/74569 CATERPILLAR D10R, Torque Converters, Rebuilt, 1102769/35220 CATERPILLAR D11R, Torque Converters, Used, 1210030/47691 CATERPILLAR D10L,D10, Torque Converters, Rebuilt, 6P6412/31183 CATERPILLAR D11N, Track Frame, Used, 6Y2686 & 6Y2687 CATERPILLAR D6T LGP, Track Frame, Used, 2393231 & 2393232 CATERPILLAR D11,D11N, Track Frame, Rebuilt, 6Y2686/54865 CATERPILLAR D11,D11N, Track Frame, Rebuilt, 6Y2687/54866 CATERPILLAR D11R,D11T, Track Frame, Rebuilt, 1380576 & 1380577 CATERPILLAR D8R,D8R II,D8T, Track Frame, Used, 1753632 & 1753633 CATERPILLAR D8R,D8R II, Track Frame, Rebuilt, 9W6491 & 9W6492 CATERPILLAR 988B, Transmissions, Rebuilt, 9W0782/32318 CATERPILLAR 776B,777C,777D, Transmissions, Used, 8E9035/73783 CATERPILLAR 980G, Transmissions, Used, 1066452/70110 CATERPILLAR IT28G, Transmissions, Used, 1164860/74079 CATERPILLAR 980G II, Transmissions, Rebuilt, 1167684/71797 CATERPILLAR D350E, Transmissions, Rebuilt, 1230755/40296 CATERPILLAR 16, Transmissions, Used, 9M8300/42387 CATERPILLAR 924G, Transmissions, Rebuilt, 1402772/57646 CATERPILLAR 992C,992D, Transmissions, Rebuilt, 3P9241/59831 CATERPILLAR 930G,938G, Transmissions, Used, 2348866/32134 CATERPILLAR 988G, Transmissions, Rebuilt, 1922914/66703 CATERPILLAR D6R XW III,D6T,D6T LGP,D6T LGP VP,D6T LGP VPAT,D6T LGP WDA,D6T XL,D6T XL DS,D6T XLVP,D6T XW,D6T XW LGP,D6T XWVP, Winch Used, 2827492/72873 CATERPILLAR D5H, Winch, Used, 08929/51595 CATERPILLAR D6T, Winch, Used, 09056/71087

WWW.CLEVELANDBROTHERS.COM USED PARTS - 1.855.545.0267 ext. 2


Page 28 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mecalac Brings Unique Equipment Lines to U.S. Market

With the fork attachment, the Mecalac can easily place jersey barriers around the job site.

Using Mecalac’s Connect quick coupling system, an operator can covert the machine from an excavator to a skid steer attachment in 10 seconds.

The Mecalac all-terrain skid excavator can mount a skid steer bucket, perform all of the functions of a skid steer/track loader and lift and load materials to a pile or truck as high as 16 ft. (5 m), due to Mecalac’s versatile boom with integrated high reach offset.

The MCR can fully rotate while carrying a load up to 40 percent of its own weight.

MECALAC from page 24

This provides the machine with 360-degree lifting performance. The cab is 20 percent lower when compared with other similar products on the market and entering and exiting the vehicle requires much less effort; it is further eased by the addition of a step that has been perfectly incorporated into the machine’s design. The MWR’s fuel tank is extremely easy to access because it is located in the undercarriage, level with the step that leads straight to the cab.

Without needing to move, the machine is always ideally positioned with high precision in cramped or sensitive construction sites. Even when behind an obstacle, such as a nearby wall running parallel to the vehicle, it can still dig downwards and lift loads up to half its weight to a height of approximately 10 ft. with an exceptional economy of movement. The unique kinematics provides its articulated arm with a range of up to nearly 30 ft. in a single operation. The MWR Series features 7MWR, 9MWR and 11MWR models, and a 15MWR model with an option for a Mecalac boom or a traditional excavator boom.

An Important Acquisition “Right from the start of the business, it’s always been important to us to listen to our customers both nationally and internationally, and to listen to their needs, which are not only economic but structural and cultural, too,” said Marchetta of the Terex Coventry plant purchase. “Our machines have evolved in line with their expectations, and the expansion and complexity of urban construction sites. Our core business is now in compact, versatile, easy-to-handle, ergonomic machines, like the new MWR see MECALAC page 104


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 29

Bayville, NJ (732) 606-1002

Old Bridge NJ (732) 591-2088

www.jerseyrents.com

We also offer a variety of Attachments like Shears, Rotating Grapples, Crushers and so much more!

3 Year 4,000 Hour Warranty 0% for 60 Months 3 Year Warranty

0% Financing

Standard Auto Lube • Quick Coupler • Bucket and Forks

Excavators

Wheel Loaders

0% Financing

0% for 48 Months 2 Year Track Warranty Call for the Best Deal on the Best Machine

Skid Steers • CTLs

Excavators

And Many More


Page 30 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Westchester Tractor, Inc. 60 International Blvd • Brewster, NY 10509 RS NEW CHIPPE RS & GENERATO K NOW IN STOC

845/278-7766 Fax: 845/278-4431 E-mail: equip@wtractor.com

Now Serv ing All of Connectic ut

LATE MODEL EQUIPMENT

TLB’S: 1987 FORD 555B, ROPS, 4WD ....................................................................................SOLD $10,000 TRACTORS: 2014 KUBOTA 2650HST, CAB W/HEAT/AC, HYDROSTAT, 755 HRS, INDUSTRIAL TIRES ............$22,000 2000 KUBOTA BX2200D, 4WD, INDUSTRIAL TIRES, 110 HRS, 50” 2 STYLE SNOW BLOWER ................ ....................................................................................................................................SOLD $5,995 2013 KUBOTA BX25D TLB, MID MOUNT MOWER, 3PT HITCH, REAR GRADER BLADE, 120 HOURS ...... ..................................................................................................................................SOLD $15,000 NEW HOLLAND TS100A, SWD W/21’ MACHETTE FLAILAX, BOOM MODEL MB21 SN 02221, FLAIL AXE (BELT DRIVEN), 48”, NEW REPLACEMENT HEAD - MF48-01598, 1433 HRS ............................$69,000 2012 NEW HOLLAND BOOMER 50, ROPS, AG TIRES, 4WD, GEAR TRANSMISSION, LOADER, 265 HOURS, NEW COND ....................................................................................................SOLD $20,000 2006 NEW HOLLAND TL55DA TRACTOR LOADER, ROPS WITH CANOPY, 12X12 HYDRO, 16” BACKHOE BKT, 652 HRS ............................................................................................................SOLD $24,995 TRAILERS: 2007 BIG TOW B7, 7 TON, 18’X84’ WOOD DECK ......................................................................$2,995 1999 FELLING FT40E, 20 TON, AIR BRAKES, WOOD DECK ......................................................$5,995 2009 INTERSTATE 20DT, 10 TON, ELECTRIC BRAKES, 20’ DECK, 5’ DOVE ................................$7,000 2000 TOWMASTER T-50RG, 50 TON, 120” WIDE, 25’ FLAT, 13’ TOP, 38” OVERALL, FOLDING RAMPS, FULL WIDTH ..............................................................................................................SOLD $15,995 EXCAVATORS: 2014 DOOSAN DX180-LC3, FULL CAB, 694 HRS, QUICK COUPLER, HD BUCKET, NARROW TRACK ...... ........................................................................................................................................ $120,000 2006 KOBELCO 115SR, CAB, HYDRAULIC COUPLER, MANUAL THUMB, PLUMBED, 4905 HRS $44,900 2013 KOBELCO SK260-9, FULL CAB, QUICK COUPLER, 2660 HRS ........................................$139,000 2005 KOBELCO SK250LC-6, FULL CAB, PLUMBED, WEDGE LOCK COUPLER, PATTERN CHANGER, 5300 HOURS ......................................................................................................................SOLD $59,995

1996 KOMATSU PC40R-8, STEEL TRACKS, MECHANICAL THUMB, CAB W/HEAT, 4896 HRS, NEW 24” BKT ............................................................................................................................SOLD $19,995 2005 NEW HOLLAND E80 MIDI EXCAVATOR, 30” HENSLEY BUCKET, CAB W/HEAT/AC, FULLY SERVICED, 5600 HOURS ......................................................................................................$39,995 2002 TAKEUCHI TB135, OPEN ROPS, WAIN ROY COUPLER, 24” BKT, 7300 HRS ............SOLD $17,000 2004 VOLVO EC55B, FULL CAB, HYDRAULIC THUMB, RUBBER TRACKS, BLADE, 24” BUCKET, 4437 HOURS ......................................................................................................................SOLD $31,995 DOZERS: 2006 NEW HOLLAND D85, 1607 HRS ....................................................................................$39,995 CHIPPERS/STUMP GRINDERS: 2005 BANDIT 250 CHIPPER, WINCH, FEED WHEEL, EXTENDABLE TONGUE, AUTO CLUTCH, 4875 HOURS, 125HP DEERE ENGINE ....................................................................................SOLD $24,995 2003 BANDIT 254 CHIPPER, WINCH, DUAL AXLE, HYDRAULIC FEED WHEEL LIFT, 2309 HOURS, DEERE 170HP DIESEL ENGINE, HYDRAULIC CHUTE ROTATOR ......................................SOLD $27,995 2012 BANDIT 2250XP STUMP GRINDER, 293 HRS, TRAILER ........................................SOLD $15,000 2004 VERMEER SC352 STUMP GRINDER, 34HP DIESEL DAIHATSU ENGINE, TRAILER, 1494 HRS ........ ....................................................................................................................................SOLD $9,500 WHEEL LOADERS: 2004 DAEWOO MEGA200V, FULL CAB, 4 IN 1 BUCKET, 1670 HRS, ACS COUPLER ..................$45,000 2016 KAWASAKI 67-Z7, FULL CAB, 153 HOURS, RIDE CONTROL, HEATED SEAT, 2.8 CU YD BUCKET.... ..........................................................................................................................................$142,000 2013 NEW HOLLAND W80B, FULL CAB, HEAT/AC, 1.57 CU YD BUCKET, TOOL CARRIER, 902 HOURS .. ..........................................................................................................................................$82,995 MISCELLANEOUS: 2007 KUBOTA RTV900 UTILITY VEHICLE, CANOPY, 4WD, WORK SITE TIRES, 914 HOURS ........$9,995

2004 Daewoo MEGA200V

New Holland TS100A Tractor

See dealer for financing details. CNH Capital America LLC standard terms and conditions apply. Subject to customer credit qualifications. CNH Capital America LLC reserves the right to cancel any program without notice.

VISIT OUR WEB SITE

AT WWW.WTRACTOR.COM

NOW IS TH HE TIME M TO BU Y A DOOSAN N W WHEEL LOADER R AT Righ ig h t n noow at B Bes est Line Equipm men ent Poowe werLeas r L e as e S M a D Doo oosan DLL22 220 ffor o

$

573 5 ,7 73 39 39 $ 50

PER MO MO. FOR O 5 MO OS. S PER YEAR.

PER R MO O. FOR 7 MO OS. PER R YE AR. A

60 6 0M Moonth TTota Mon To otal LLea Leas eassee ea

ALLENTOWN

H HARRISBURG

SHIPPENSBURG

STTA ATE A TE COLLEGE C

TOW WANDA ANDA DA

UNIONTOWN

WEST CHESTER

(484) 223-3814

(717) 540-7867

(717)) 530-8400

(814) 237-9050

(570) 265-4440 440

(724) 437-1578

(610) 241-3633

Givvee us a call today or visit our w weebsite : 1-800-679-BEST | BestLine.com | BestLineDoosan.com Find Us On:

R E N TA L | S A L E S | SE R V ICE

*Limited time offer. Eligible on new, never before sold Doosan exxccavators and wheel loaadders to all customers with the following restrictions: Program IS NOT available for Government Accounts, National Accounts, Municipal / Utility Bid and non-commercial customers. Sales to and out of dealer rental fleets or dealer-owned leasing companies DO NOT qualify. Offer good for a limited time only. Doosan Construction Equipment reserves the right to extend or discontinue this program aatt any time without prior notice. Lease faacctor of 0.01189 for 60 mo. with zero down payment. PowerLease payments are in arrears and will be due monthly. Payments do not include any applicable taxes. There is no sales tax due at at signing. Taxes billed monthly in aadddition to lease paayyment or as required by applicable tax authority. PowerLease rates and factors are subject to change at at any time for any reason. Maximum annual usage is 2000 hours. Contact dealer for details. All hand held tools are excluded from this program. This program MAY NOT be used in conjunction with any other Doosan-sponsored customer program. This program MA AYY NOT be used with In Lieu of Finance.* *Offer for a limited time only. Available at at participaatting and eligible dealers only. Offers may vary by product type, series, model and select units in dealer inventory. Offers available on new equipment in US and Canada only. Some restrictions apply. Length of contract may vary. See dealer for details. Prior purchases not eligible. Financing provided on approval of credit by authorized Doosan Construction Equipment finance providers to well qualified buyers. Administrative fees may apply. Finance offers not available to government accounts, naattional accounts and municipal /utility bid customers. Warranty offer not available to naattional accounts. Doosan Construction Equipment reserves the right to extend or discontinue any of these programs aatt any time without prior notice. Doosan® and the Doosan logo are trademarks of Doosan Corp. See parrtticipating dealers for details. Dealer not responsible for typographical errors. Photos for illustration purposes only and maayy not represent actual units. 2017 Impact Advertising • 17BLDO-NHC-CEG100417

Authorized Dealer


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 31

ShoorQuip Suupply,y, Inc.

Trench Shielding & Shoring

Call Us Fo or All Your TTrench ren nch Shoring Ne Needs eeds | We Carrry 11” Steel Rooad Plate

Manufactured by

Efficiiency Prroduction, oduction, Inc. Inc c.

Manhole Box

1302 Conshohockken Rd Conshohocken, PA 19428

Slide Rail

Manufactured by

Slide Rail System

Aluminum Build-A-Box uild-A-Box

Safe-T-Shor T-Shorre e

Aluminum Hydraulic Shoring

610 . 239 2 .6234 6234 ww ww shorquip coom ww.shorquip.co

Steel Trench Box

fax: 610.239.6237 sales@shorrquip.com


Page 32 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WHO CARES? You do. And when you’re renting air and power equipmentand ancillaries; light towers or temperature control equipment, you demand: • A complete range of clean, well-serviced generators, 20 kW to 2,000 kW. • The right light tower; 12 HP Diesel, Tier IV, 6 kW Generator, 120/240V. Max tower height 32 ft. • A choice of air compressors, from 2 hp to 500 hp. • Portable air compressors from 185 cfm to 1,600 cfm, up to 500 psi. • Temperature control products – chillers, air conditioners, and heaters. • All the ancillaries. Generators, Compressors, Chillers, Light Towers

800-821-6412 Serving MA, RI, NH, ME, VT and Upstate NY.

www.miltoncat.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 33

Link-Belt TCC’s keep proving theemselves on job sites where others simplly can’t go...

LER TELE CRAW TH ORT N NO

1LIINNE UP

#

223 ft | 68m main m boom 348 | ft 105m max m tip height with full attach hment Superior capaccities Ultra wide winch winnch design Ultra-wide Vision package - 4 cameras!

250 t | 230 mt TELESCOPIC CRAWLER HIGHEST CAPACITY A AVAIL A ABLE IN THE MARKET!

CA ! R CA MEER AAM

2866 Central Avenue Souuth Kearny, NJ 07032 Phone one (973) 589-4100 Faxx (973) 589-4811 b ite: www


Page 34 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

J.F. Kiely Supervisor Steven Allen Receives Patriot Award J.F. Kiely Construction Co. is U.W.U.A. Local 409 team honored to announce supervimember and U.S. Army sor Steven Allen as the recipiSergeant, Alex Conoshenti. ent of the 2017 Employer Conoshenti, along with an Support of the Guard and ESGR representative, and John Reserve (ESGR’s) Patriot M. Kiely, president of the Kiely Award. Announced in a cereFamily of Companies, presentmony held at the company’s ed Allen the award and annual employee appreciation expressed gratitude to both the picnic in Egg Harbor Kiely Family of Companies Township, Allen was awarded a and to Allen for their continued certificate in the presence of support of team members who service people and team memare active in military service. bers of J.F. Kiely Construction “We encourage and support Co. all of our team members to ESGR, a Department of become community helpers — Defense program, was estabcaring for people, sharing expelished in 1972 to promote coopriences and valuing their relaeration and understanding tionships with others,” said between Reserve Component John M. Kiely. “We are honService Members and their ored to have Mr. Allen as part civilian employees to assist in (L-R) are John M. Kiely, president of the Kiely Family of Companies; Steven Allen, recipient of the 2017 of our family, and will continue the resolution of conflicts aris- Employer Support of the Guard and Reserve (ESGR’s) Patriot Award; U.S. Army Sergeant Alex to support our country’s service ing from an employee’s mili- Conoshenti; and ESGR Representative David Farber. men and women.” tary commitment. For 45 years, For more information about The ESGR Patriot Award is granted to a wide-range of measures including flexible J.F. Kiely Construction Co., call 732/222ESGR fosters a culture in which all team members support and value the employ- service person serving in the National schedules, time off prior to and after 4400 or visit kielybuilds.com. ment and military service of members of Guard or Reserve, or the spouse of a Guard deployment, caring for families, and grant(This story also can be found on the National Guard and Reserve in the or Reserve member, and reflects the efforts ing leaves of absence if needed. Allen was Construction Equipment Guide’s website at made to support citizen warriors through a nominated for the Patriot Award by www.constructionequipmentguide.com.) United States.

Doosan Bobcat Assists With Harvey, Irma Relief Efforts Doosan Bobcat is donating more than $325,000 worth of Bobcat equipment and Doosan Portable Power light towers and generators to assist with Hurricane Harvey and Hurricane Irma relief efforts. The company also is providing financial assistance to affected Doosan Bobcat North America dealership employees and their families, and Doosan Bobcat North America employees will direct annual charitable drives toward assisting those impacted by Hurricanes Harvey and Irma. In the days before Hurricane Harvey made landfall in Texas, Doosan Bobcat expedited equipment and attachment deliveries to impacted areas in an effort to be immediately prepared for clean-up efforts.

Doosan Bobcat also took steps to expedite equipment deliveries to southern Florida in preparation for Hurricane Irma. “Doosan Bobcat has been on the scene helping communities recover from natural disasters for more than 50 years,” said Rich Goldsbury, president of Doosan Bobcat North America. “We have a ready-response program that ensures Bobcat equipment and other assets are readily available to help out local communities, our dealerships and their employees. Our support and prayers go out to those affected by Hurricane Harvey and Hurricane Irma.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Keep Up With All the Industr y News Subscribe to

Construction Equipment Guide Today! Toll Free 800/523-2200


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 35

THE LEAD DING SUPPLIER OF HYDRA DRAULIC & INDUSTRIAL HOSES,, FITTINGS, AD DA APTERS & MORE!

MINIMIZE EQUIIPMENT

C CUSTOM BUILT

DOWNT IME WITH OUR ETA 1 HO OUR 24/7

ON SI ITE HOSE SER RVICE Our trained service techn nicians arrive at your site, re emove the failed f hose, then fabricate and install a new high quality hose on site to ge et you up and running quickly.

H HOSE ASSEMBLIES Equ uipment Managers, make life e easier! We can supply ALL the specialized zed parts you u need, even hard to find mettrics, at our con nvenient service counters. We also offer: f

We B Bring i th the Hose Shop H S to You! o

• Tube Bending Service •O Oil Filtration Products o •P Pneumatic Products o •M Machine and Component Recovery covery •P Preventative Hose Maintenance ce Programs •A Automotive Products, Brake Lines L •A And More!

Boston, MA

New Jersey

N Norfolk, VA VA

Philadelph hia, PA

Pittsburgh, PA PA

Richmond, V VA A

Was shington, DC

PIRTEK A Avon von 508-584-9595

PIRTEK Newark 908-624-9990 PIRTEK South Brunswick 732-940-7333

PIIRTEK Norfolk 7 757-460-4673

PIRTEK South S Philadelpphia 610-586-22290

PIRTEK Monroeville 412-373-9720

PIRTEK West End 804-442-7140

PIR RTEK Rockville 3001-910-4673

Active designs, manufacturees, and services radiaators, charge air coolers, and oil coolers foor all years, all makees, all models E S T A B L I S H E D

1 9 5 3

Hundreds of P Parts arts in Stock at a Warehouse Warehouse Near You You

Fuel Tanks Tanks and Hydraulic y Tanks ccleaned and Tanks repaired. Rust preventative lining available.

!TLANTA s #HICAGO s #INCINNATI $ALLAS s (OUSTON s ,OS !NGEELES 0HILADELPHIA s 4A 4AMPA

www.activeradiator.com


Page 36 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

OPDYK OPD YK KE IINC N C..

$4 49,500

8892

Trucks s11 2 3 .CC O M

SPEC SPE CIALIZED C I A L I Z E D TRUCK TRUCK & EQ EQU UIPMENT I P M E N T SALE S A L ES S

$6 69,500

8931

89 926

$4 49,500

55.5 T TO ON 18 T TO ON 51,,7 5 776 76 m miille es

21,,7 2 776 76 miles miille m es

200 20 06 INT NT TERNA ATI TIO ONA ONA AL L 4300; DT466 6 CYL (255 HP); ALLISON 5 SP; A/C; 33K GVW. 2 20 00 05 E EF FF FE ER 1 15 55 5.11 1//2 2S KNUCKLEBOO OOM; 5.5 TON; 13’ STEEL FLAT/UTILITY Y.

200 20 05 ST TE ER RL LN LI NG L7500; 00; 0; MERCEDES 0 0M906LA-6 CYL (260 HP); 6 SP; A/C; 33K G . A GVW AL LTEC L TEC C TE CRA RA AN NE M MO ODE OD EL L AC18-70B; 18 T ; 120’ HOOK HT; 20’ STEEL FLA TON ATBED TBED.

16 T TO ON

8922 89

$119 $119 9,500

89 923

$17 79,500 ,5 500

6.5 T 6 TON ON

118 8,16 62 miles miille m es

200 20 08 VOL V OL LVO VO TRACTOR T RA ACT TOR; VOL LVO VO D13-485 6 CY YL (485 HP); FULLER 8LL; A/C; 66K GVW. 199 99 HIA A AB 12 25 5--4 4 K KN NUCK CKL KLEBO OOM; O OM; M; 6.5 TON; RADIO REMOTES.

26 2 6T TO ON

$64,500 64,,500 64,500

22 2 2T TO ON

4,256 4,256 256 56 miles

2015 2015 15 5 PET PET TERB ERB BILT IL LT TP TPB34 PB34 48; PAC PACCAR/CUMMINS ISL9330 6 CYL (330 HP); AUTO; A/C; 56K GVW. 2014 4 PM 3 P 38 8525SPLC 52 25 5S SP PL LC KNUCKL KLEB LEB BOO OM; 16 TON; RADIO O REMOTES; 14’ STEEL FLA AT T W/ 18’’ SIDES.

$129 29 9,5 ,500 500

8919 89 919 9

8803

F U E L T R U CCK K S I N STT O CK! CK $99,500

13 T TO ON

8906

115 5,118 m miille es

112 2,,401 40 01 miles iles le es

200 20 2 005 00 05 MA ACK AC A C CV CK CV CV713; CV7 V713; 713 1 A1-400 A1 400 0 6 CYL (400 HP); HP) FULLER 8LL; A/C; 79,200 GVW. NA NA ATIONAL TO TI ONAL NA AL C CRAN CRA RA ANE 900A A; 26 TON; 157’ HOOK HT; 21’6’’ STEEL FLA ATBED TBED.

UNMOUNTED KNUCKLEBOOMS

24 42 2,,3 39 92 miles miille m es

200 20 05 MA 0 AC CK CV CV7 71 13 3; A1-400 6 CYL (400 HP); FUL LLER 8LL; A/C; 73,280 GVW. 2 20 004 04 H HIA IA AB KNUCKLEBOO OOM M MO ODEL ODEL EL L 300-4; 13 TON; RAD DIO REMOTES; 22’6’’ STEEL FLATBED. $74 4,500

89 904

19 99 96 MA ACK AC K RD D688S; E-7400 (400 HP); FULLER 8SP; A/C; 73,280 GVW. MA A IT AN TEX EX XC CRA RA A E2 AN 22 284 84; 4 22 TON; 94’ HOOK 4; HT; 2 SP WINCH; 20’6’’ WOOD FLA ATBED TBED. $74 4,500

13 T TON ON

89 913

26 2 6 TON ON $99,5 ,500 500

16 6T TO ON

14 4,,,6 620 m 62 miles iles les es

2007 20 07 7 ST T R TE RL LING L LT9500; L T9500; MERCEDES T9 0M460 6 CYL (450 HP); ALLISON 6 SP AUTO; A/C; ALUM WHEELS; 54,160 GVW. NA ATION A TO TIO ON NAL AL CRAN CRA C RA ANE 900A A; 26 TON; 100’ H HOOK HT; 24’’ AUGER W/ 2 SP DIGGER MOTOR; POLE CLAWS; 20’ WOOD FLA 20 ATBED TBED. 8899 99

82 FO FO OT OT SIDE SID SI IDE DE REACH REA RE EAC ACH CH

20+ 2 0+ +U USED SED 23 2 39 9,,493 49 93 miles iles le es

sta st tart ta rttiin ng g at $9 $9, 9,,5 500 50 00

33112 23

BET B ET TH T HL LEH LE HE EM M

PIIK P KE K E E,

HA HAT H AT TF T FIE FI EL LD, LD D

200 20 05 MA AC CK K CV713; AM1-370 6 CYL (370 HP); MAXI TORQUE 10 SP; A/C; 58K GVW. 20 2 00 02 P PR RIN NC CET ET TO O ON E2 E 2--3 3RV RV VX PIGGYBACK YBA AC CK K FO F ORKLIFT; 2.75 TON; 24’ STEEL FLA ATBED TBED.

PA P A

119 944 440

209 20 9,,7 78 85 miles iles le es

2004 2004 04 4 FR F RE EIG GHT HT TL LN LI NE ER FL112: F L112: 12 2: MERCEDES 0M460-LA 0-LA 6 CYL (435 HP); FULLER 8LL; 73,280 GVW W.. 20 2 00 03 H HIA IA AB 3 300-4 00-4 0-4 -4 4 KNU UCKLEBOOM; OOM;; 13 TON; RADIO REMOTES; 22’6’’ STEEL T FLA ATBED D.

886 66 6--2 6 2339 2 9--04 9 04 0 451 45

197,815 97,815 ,8 815 miles

200 20 03 K KE ENWORTH NW WORTH ORT ORT TH T T800 800 00 TRACTOR; RA ACTOR; A CT TOR; R; CAT C-12 6 CYL (395 HP); FULLER 8LL; L A/C; ALUM WHEELS; 58,740 GVW. 2 20 002 02 P PALFINGER AL AL LFINGER FINGER IN NGER PK50002 002 02 KNUCKLEB NU UCKLEB LEBOO LE OOM; 16 TON; RADIO REMOTES. O

SSA AL A LES@ S@ @O @OPDYKES.COM OPDYKES.COM Y YK KESS..C CO COM OM


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 37

2016 KOMATSU PC138US LC-11, #50195, 678 hrs., A/C, 20” Roadliners, Straight Blade, 8’2” Arm, Hyd. Control Unit, Coupler, 30” Bucket ..............$169,500

2015 KOMATSU PC360 LC-10, S/N #A33524 2261 hrs., Tier 4i Engine, 34” Tracks, 10’6” Arm, Aux. Hyds., 42” Bucket., Certified Used..............$185,000

2016 KOMATSU PC228US LC-10, S/N 1771, 1266 Hrs, 32” Tracks, 9’6” Arm, Hammer Kit, Coupler, Auto Lube System, Tier 4i Engine ..............$199,000

2012 KOMATSU PC390LC-10, #A30029, 4627 Hrs, 36” Tracks, 10’5” Arm, Coupler, Autolube.................. ..................................................................$217,500

2015 KOMATSU PC490 LC-11, S/N #A41140, 1846 hrs., 15’ 9” Arm, Coupler, 54” Bucket, 34” Tracks, Removable CWT Device..............................$346,000

2016 KOMATSU PC138US LC-11, S/N #50086, 1193 hrs., Tier 4F Engine, 8’2” Arm, Coupler, Aux. Hyds. Choice of Bucket, Certified Used ................$160,000

2016 KOMATSU D65PX-18, S/N 90176, 1152 Hrs, 36” Tracks, Cab & A/C, Plug & Play GPS .................. ..................................................................$268,000

2014 KOMATSU PC360 LC-10, S/N #A33351, 2450 hrs., Tier 4i Engine, A/C, 34” Tracks, 10’6” Arm, Aux. Hyds., 48” Bucket ......................................$165,000

2005 Terex Pegson 1412 Trakpactor, S/N #140109CA, Hrs., 4078, Impact Crusher, Side Conveyor, 1340mm Rotor Size ..................$165,000

2015 KOMATSU WA380-7, S/N A64558, 157 Hrs, 23.5 X 25 Tires, 2 Spool Valve, A/C, Coupler, 4cy GP Bucket, Ride Control ..................................$192,300

2016 KOMATSU WA500-8, #A96297, 109 hrs., Enclosed Cab W/A/C, 8CY Pin-On GP Bucket ............ ..................................................................$423,000

2014 VOGELE SUPER 700, #0790.1504, Hrs. 725, AB 200 3’8” TO 6’7” Electric Screed, Push Rollers.... ..................................................................$104,500

2008 KOMATSU PC50MR-2, #7616, 7825 hrs., Cab, Rubber Tracks, A/C, 6’7” Arm W/Piping, Blade, 18” Bucket ..........................................................$24,700

2014 HAMM HD120iVVHF, #H207.0050, 639 hrs., Open ROPS, Deutz Diesel Engine, 78” Drums, Vandalism Protection..................................$128,500

2016 TAKEUCHI TB230, S/N 00571, 210 Hrs, 12” Rubber Tracks, 4’9” Arm, Hyd. Thumb & Blade ........ ....................................................................$34,000

South Plainfield, New Jersey

*** JUST TRADED ***

2012 HAMM HD13VV, S/N #H201.0718, 2483 hrs, Open ROPS, Kubota Dsl Eng, Maximum Force 14,625 LBS, 52” Drums, Cleaned & Recently Serviced, Ready to Work ..........$25,000


Page 38 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Quality Used Equipment

‘11 John Deere 544K

‘08 Caterpillar 320DL RR

'06 John Deere 310G, 2924 hrs, 4 wheel drive & 4N1 bucket, 80% tires all the way around, good brakes and steering, engine and transmission work properly ............................$27,500 '00 New Holland LB75B, 5513 hrs, tight front loader bucket, tight swing frame, tight rear bucket, good brakes, 19.5-24 rear tires, extend a hoe, street pads on stabilizers ......$15,500 '96 Champion SuperPac 540, 2139 hrs, 54" smooth drum, 80% diamond tread rear tires, good rubber insulators, tight center joint and steering................................................$19,500 '04 Dynapac CA250D, 84" smooth drum, Cummins diesel engine ............................$49,500 '01 Ingersoll Rand DD-24, 4386 hrs, Kubota diesel engine, 47" drum, tight center joint & steering..........................................................................................................................$9,500 '08 John Deere 850J WH, 5790 hrs, waste handling package, 12' 6" straight blade with hyd hilt, 70% on U/C ........................................................................................................$129,500 '02 Caterpillar D5GLGP, 6313 hrs, enclosed cab w/ heat & A/C ................................$49,500 '03 Caterpillar D6NLGP, 6884 hrs, 34" wide pads, good tight blade, enclosed cab w/ heat & A/C ..............................................................................................................................$69,500 '04 John Deere 700HLGP, 2913 hrs, enclosed cab w/ heat & A/C, 6-way blade 2 shank rear ripper, 30' wide pads, U/C 75% ..................................................................................$69,500 '07 Takeuchi TL 140, N/A hrs, enclosed cab w/ A/C ..................................................$24,500 '04 Takeuchi TL 140, 2205 hrs, OROPS, 2 speed works ............................................$20,500 '08 Caterpillar 320DL, 6812 hrs, enclosed cab w/ heat & A/C , aux plumbing ..........$69,500 '06 Hitachi ZX120, 4416 hrs, EROPS w/ heat & A/C, aux plumbing, good U/C..........$49,500 '08 Caterpillar 320DL RR, 7028 hrs, EROPS w/ heat and A/C, dozer pads................$69,500 '13 Volvo EC140DL, 1709 hrs, cab w/ heat & cold A/C, hyd coupler, rear view camera, 9' 6" stick with aux hyd plumbings ......................................................................................$86,500 '12 John Deere 160GLC, 3564 hrs, enclosed cab w/ heat and A/C, Deere diesel engine, Pemberton mechanical thumb ....................................................................................$89,500 '10 Komatsu PC130-8, 5420 hrs, enclosed cab w/ heat and A/C, mechanical thumb, rear view camera ................................................................................................................$54,500 '05 John Deere 135C RTS, 2761 hrs, enclosed cab w/ heat & A/C, mechanical thumb $64,500 '00 Caterpillar 318BL, 5926 hrs, cab with heat, aux plumbing, hyd Q/C ..................$49,500 '12 Komatsu PC130SLF, 2200 hrs, enclosed cab w/ heat & A/C, 38ft long reach, aux hyd, Q/C, 60" grading bucket ..............................................................................................$86,500 '00 Takeuchi TB135, N/A hrs, back fill blade, manual thumb, aux plumbing, rubber tracks .... ....................................................................................................................................$14,500 '93 Lull 644 Highlander ll, 8162 hrs, OROPS, 6,000 lb capacity, 34' reach, Deere diesel powered ......................................................................................................................$29,500 '00 Caterpillar TH103, 4006 hrs, 10,000 lb capacity, 4 wheel drive, 3 way steering..$32,500 '90 John Deere 762B, N/A hrs, open canopy, no repairs done ..................................$16,500 '11 John Deere 544K, 6636 hrs, enclosed cab w/ heat & A/C, hyd Q/C, aux hyd, ride control, 20.5-25 tires ........................................................................................................$79,500 '74 John Deere 544A, N/A hrs, enclosd cab with heat, 17.5-25 tires ..........................$8,500 '93 John Deere, 1062 hrs, EROPS w/ heat, ACS bucket-coupler-forks, matching radial tires ....................................................................................................................................$33,500 '94 Caterpillar IT28F, 10,523 hrs, enclosed cab w/ heat & A/C, hyd Q/C w/ bucket & forks .. ....................................................................................................................................$29,500 '11 John Deere 250GLC, 7715 hrs, EROPS w/ heat & A/C, 60ft Jewell Long Reach..$92,500 '06 Hitachi ZX240LC-3, 5510 hrs, can w/ heat & A/C, hyd thumb, new chains and sprockets, tight machine ........................................................................................................$69,500

Southeastern Equipment Corporation 2506 S. Military Hwy Chesapeake, VA 23320

757-545-3600

www.secva.net


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 39


Page 40 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLOSE TO OUR CUSTOMERS

ELLIOTT & FRANTZ, INC. WWW.ELLIOTTFRANTZ.COM 10421 Guilford Road Jessup, MD 20794 301/725-7394 Fax: 301/725-7361 38420 Sussex Highway Delmar, DE 19940 302/846-3033 Fax: 302/846-0763 12051 Tac Court Manassas, VA 20109 703/257-2381 Fax: 703/257-2383 450 E. Church Road King of Prussia, PA 19406 610/279-5200 Fax: 610/279-6366

CLOSE TO OUR CUSTOMERS

Find out more: www.wirtgen-group.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 41

716-655-1101

1101 Maple Road Elma, NY 14059

Toll Free: 800-652-1101 Fax: 716-655-0374

2016 KPI-JCI FT4250CC, (1) PIONEER FT4250, S/N- 415918, CLOSE CIRCUIT TRACK MOUNTED IMPACTOR INCLUDES: ENGINE - CAT C13 440 HP, TIER IV, 1800 RPM CONTROL SYSTEM RADIO REMOTE IMPACTOR - 4250 HORIZONTAL SHAFT WITH HEAVY-DUTY SOLID ROTOR ASSEMBLY, 3 REVERSIBLE AND REPLACEABLE BLOW BARS, HOURS: 358, SERIAL NUMBER: 415918, CONDITION: USED, STOCK NUMBER: AG1233....................$837,500

PUT US BACK B ON YOURR BUCKET LIIST.

2015 ASTEC GT205S: GT205S – THREE DECK SCREEN -ONE (1) 3520K TRIPLE DECK SCREEN: 5’ X 20’ TOP AND MIDDLE DECK, 18’ BOTTOM DECK, HOURS: 10, S/N: 154151................................$CALL

%$6&+0$11 6(59,&(6 DID.

2016 KPI-JCI FT2650, FT2650 TRACK MOUNTED JAW CRUSHER ENGINE - CAT C9.3 300 HP, TIER IV, 1800 RPM CONTROL SYSTEM - RADIO REMOTE/TETHER VANGUARD JAW CRUSHER - 2650 AUTOMATIC HYDRAULIC DUAL WEDGE ADJUST CSS, HYDRAULIC DRIVE FOR CRUSHER, HOURS: 428, SERIAL NUMBER: 416212, CONDITION: USED, STOCK NUMBER: AG1238....................$776,466

Genuine KOBELCO exxcavators are back and #BTDINBOO 4FSWJDFT is the authorized KOBELCO dealer for contractors in our area. We represent this top p line of excavators because they’re reco ognized worldwide for outstanding qualitty, strong manufacturing support and competittive pricing.

2015 KOBELCO 140SR LC: CAB HEAT & AC, CLEAN, 799 HOURS, AUX HYDS, 24” PADS, HYDRAULIC QC, LIKE NEW, QUICK ATTACH ........ ..........................................................................$115,525

2008 KPI-JCI FT4240CC: RECONDITIONED 2008 KOLBERG – PIONEER FT4240CC, 5,737 HOURS, CUMMINS QSL9 325 HP, TIER 3, S/N: 408443 ........................................................................................$325,000 ANACONDA TD516: TRACKED TROMMEL SCREEN 5 X 16 TROMMEL, EASILY TRANSPORTABLE, FORWARD & REVERSE 4-WHEEL DRUM DRIVE, 84HP JCB ENGINE, VARIABLE SPEED ON DRUM & ALL CONVEYORS, 2 UNITS AVAILABLE ........................$CALL

If you’re looking for eexcavators proven to drive increased productivity and profitability, maybe it’s time to add d KOBELCO to your bucket list.

GT205S 5 X 20 TRIPLE DECK TRACKED SCREENING PLANT: 2015 MODEL YEAR ........ ..................................................................................$CALL

2015 ASTEC GT165: 5 X 16 2 DECK, TRACK SCREEN PLANT, HOURS: 320+/-, APRON FEEDER, HOPPER EXTENSIONS........$CALL

Call #BTDINBOO 4FSWJDFT today.

2013 KAWASAKI 70TMV Z-2, TOOL CARRIER FRONT END 3.4 CU YD BUCKET, JRB HYDRAULIC COUPLER, THIRD VALVE 20.5 25 L-3 TIRES, UNIT NUMBER: C3030, LIKE NEW CONDITION .............. ..............................................................................................................$139,225 TEREX TSR60: APPROXIMATELY 180 HOURS, 60HP PERKINS TURBO DIESEL, 16GPM AUXILIARY HYDRAULICS, REVERSIBLE WHEELS, 67” BKT WITH BOLT ON EDGE ........NEW PRICE $23,900

ASV VS60 VERTICAL LIFT: 60HP, CAB HEAT & AC, RADIO, SUSPENSION SEAT, BLOCK HEATER, 72" BUCKET, HYDRAULIC BUCKET COUPLER..........................................................$42,175

2014 KOBELCO 17SR-3: KOBELCO 17SR MINI EXCAVATOR. RUBBER TRACKS WITH EXPANDABLE UNDERCARRIAGE, DOZER BLADE, OPEN ROPS, PLUMBED ....................................................$25,299

www.KOBELCO-USA A.com

Dealer Logo and Addr d ess 1101 Maple Road Elma, NY 14059

2015 ANACONDA TR60, THE TR60 IS A TRACK MOBILE HIGH CAPACITY STOCKPILING CONVEYOR, WHICH IS STRONG AND ECONOMICAL TO RUN. THE TR60 IS VERSATILE AND CAN BE USED ON ITS OWN OR WITH OTHER SCREENING PLANTS. HOURS: 624, SERIAL NUMBER: TR6036-0070, CONDITION: USED, STOCK NUMBER: AG1218................................................................................$77,500 KOBELCO SK350 LC MARK 8: 264HP HINO, 79,600LB, 31.5” TRACK SHOES, 13’7” ARM, CLIMATE CONTROL W/AC, AM/FM, BUCKET, BI-DIRECTIONAL, AUXILIARY HYDRAULICS..............$CALL

2016 KAWASAKI 62Z-7 WHEEL LOADER: WITH HYDRAULIC COUPLER, HEATED SEAT & MIRRORS, 2.5 CU YD BUCKET, 3RD VALVE, 20.5 RADIAL TIRES, (2) LOW HOUR EX SNOW RENTAL UNITS AVAILABLE.............................. ..................................................CALL FOR DETAILS


Page 42 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Skanska Tops Out 99M Project in D.C.’s Capitol Riverfront

The D.C. team signs the final beam at the topping out of 99M Street. We are a full service authorized Eager Beaver Dealer.

Equipment Rentals – Daily, Weekly and Monthly Terms Please Call for Rates

2012 Kawasaki 70ZV-2 Loader, 2272 Hrs, Diesel, EROPS, Stk# WL096 ......$97,500

2016 Cam 7 Ton Dump Trailer, Mesh Tarp, Stk# CAM050 ....$9,495

MAKE OFFER

2011 Case 580SN, EROPS, AC, 4x4, GP Bkt, Stk# LB183 .............. ................$53,900

DELIVERY

Various New Excavators, Grapples and Thumbs

2004 L8500 Wtr Trk, 24,906 Miles, 5 Spray Heads, Stk# WTR006 ..$44,500

2007 Case 621D Loader, EROPS, 3 Yd GP Bkt, QC, STK #WL092 ..$59,900

2011 JD 310SJ, Heat & AC, Lever Controls, Stk# LB194 .............. ................$51,900

FINANCING

MIKE ZYNDORF LLC 609-625-8660 609-442-5514 (EVENINGS) FAX 609-625-8664 6481 Harding Hwy (Rt 40) Mays Landing, NJ 08330 Please Visit us www.mzequipment.com for our complete inventory

Skanska has achieved the “topping out” milestone at 99M, signaling the last pour on the roof level of the concrete, 11-story, 234,000-sq. ft. Class A office building currently under construction in Washington, D.C.’s Capitol Riverfront neighborhood. Located at the corner of 1st and M streets, SE, 99M is steps from both Navy YardBallpark Metrorail entrances and seven blocks from the U.S. Capitol. It will include approximately 220,000 sq. ft. of office space, with approximately 11,000 sq. ft. of retail/restaurant space on the ground floor. Skanska has announced agreements with office tenants PYXERA Global and the Credit Union National Association, and two restaurant tenants, CIRCA and Open Road, of the Metropolitan Hospitality Group (MHG). The building will feature a green roof and rooftop terrace, a club-grade fitness facility, secure bicycle storage and four levels of underground parking. “Skanska does not shy away from complicated projects that transform construction sites into real estate of the highest-quality. Topping out 99M is a testament to the skill and vision of a team that is setting a very high standard for flexible and sustainable construction,” said Mark Carroll, head of Skanska’s real estate development operations in D.C. “99M is already garnering attention for its sophisticated design and environmental innovations in a coveted D.C. location, the Capitol Riverfront. Its rich amenities and access to transportation only add to its appeal.” The vertical construction of 99M began after excavation was completed in February 2017. Reaching this milestone to form the building’s structure required:

• 908 construction workers dedicating approximately 184,500 work hours with a very impressive safety record; and • 1,850 trucks, which poured 17,990 cu. yds. of concrete (enough to fill 5.5 Olympic swimming pools). Now that the bones of the building are complete, the aesthetic phase of the process can begin to take shape. Skanska engaged Gensler Architects to design a building that carves, folds and bends to maximize views and sightlines and create flexible, efficient work spaces that support tenants’ changing space needs. Skanska’s other real estate developments in its greater D.C. area portfolio include: 2112 Pennsylvania Avenue, an 11-story, 230,000-sq. ft. office building and approximately 10,000 sq. ft. of ground floor retail; and RESA at Tyber Place, a new 326-unit luxury residential apartment building with significant rooftop amenities and approximately 7,000 sq. ft. of ground-floor restaurant and retail space, located at 22 M Street NE, between North Capitol and First streets, NE. In the Greater Washington area, Skanska recently completed the First Street Tunnel and is building the headquarters facility for the District of Columbia Water and Sewer Authority (D.C. Water) and American University’s East Campus project. The firm also recently completed the reconstruction of the 11th Street bridges and adjacent interchanges, infrastructure that helped spur redevelopment like 99M in the Capitol Riverfront neighborhood. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 43


Page 44 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CEG Exclusive: Tour of Mecalac’s French Factory as It

E

The Mecalac factory is located in the French Alps in the beautiful and historic city of Annecy, France.

At Mecalac’s event, members of the press and dealers from around the world were given their first opportunity to view the Mecalac MRW (MWR) series wheel loaders.

Skilled Mecalac technicians install the boom on a Mecalac model 12MTX.

arlier this year, France-based manufacturer Mecalac held a dealer meeting and press event to introduce to its more than 200 dealers worldwide the new MRW (MWR) series compact wheeled excavator. The press conference and dealer introduction was held at the Arcadium concert and meeting hall facility in Annecy, France. Annecy also is home to Mecalac’s world headquarters. There, Construction Equipment Guide was given an exclusive opportunity to tour the Mecalac factory and experience first-hand the company’s manufacturing processes, elaborate parts support and distribution network, and the rigorous testing process that each machine is put through before delivery. In addition to introducing the MWR series excavators (a hybrid compact excavator that combines the advantages of a crawler excavator and wheeled excavator that is specifically designed for the urban market), Mecalac also had on display its full line of compact construction equipment, including its new tractor loader backhoes, side-dump trucks and doubledrum asphalt rollers. Following the event, Mecalac hosted a reception at the Plage De L’Imperial — an elegant facility located on the shore of Lake Annecy offering a breathtaking view of the French Alps. While there, Mecalac dealers and the press were provided with an oppor-

The parts inventory system is so advanced that even small items such as nuts, bolts, washers and fittings can be robotically stored and retrieved.

Frederic LaBorde of Mecalac USA shows the actual order form created by the dealer and the customer. This form provides specifics of exactly how each machine will be configured; this form stays with the machine and is referenced throughout the entire assembly process.

Frederic LaBorde, business manager, Mecalac USA, points out this turret for a Mecalac model 12MTX. Upon the completion of the manufacturing of this turret, it was dedicated to the assembly of a specific machine. This process allows Mecalac to identify any problems in its manufacturing process in the event of a machine failure once it is put into the field.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 45

Unveils New MWR Series Compact Wheeled Excavator tunity to get an up-close look at the MWR machines, as well as to enjoy fine dining, live music and time to speak with Henri Marchetta, chairman and founder of the Mecalac Group, and his son, vice chairman, Alexandre Marchetta. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG see MACHINE page 110

Mecalac’s advanced manufacturing capabilities and engineering staff are often called upon to create unique applications for their machines, such as this Mecalac excavator equipped for working on Europe’s extensive rail system.

The Mecalac employees have an obvious enthusiasm for what they do. Mecalac’s factory is extremely clean and well organized. Employees presented themselves professionally and were willing to take whatever time necessary to assure that the CEG staff and other guests were given a thorough factory tour experience.

A.J. Lorusso, the first U.S. dealer of the Mecalac product, received a warm welcome at the reception following the introduction of the MRW (MWR) series wheeled excavators. (L-R): Paul Lorusso; Henri Marchetta, chairman and founder of Mecalac; Alexandre Marchetta, vice chairman of Mecalac; A.J. Lorusso; and Frederic LaBorde, business manager, Mecalac USA. The environmentally safe Mecalac paint area.

With a touch of French elegance, a quartet of stringed instruments provided background music at the reception.

As this rack containing a boom assembly leaves the paint area, it is immediately identified with exactly what carrier it will be installed on.

Mecalac has invested in one of the most advanced robotic parts inventory and storage systems, which assists the company in maintaining a very high percentage of next day parts fulfillment.

Every machine on the Mecalac assembly line is customized for the needs of each end-user. In Europe, it is the practice that every machine is custom-ordered for each customer. Unlike the U.S. market, where options are typically bundled together, at Mecalac customers receive a list of all options and features available and select each one that meets their needs. This photo shows a cylinder set entering the production line. It has already been determined what machine these cylinders will be put on, as is the case with every part that enters the line.

The Plage De L’Imperial was a spectacular venue for Mecalac’s reception.


Page 46 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

OUR TRUCKS R S.

www.Currry Supply.com | 800.345.2829 One of America’s largest manufacturers oof commercial service vehhicles, since 1932.

FIVE STAR EQUIPMENT, INC. CALL

800-441-8195

FAX

570-346-3870

ASK ABOUT FINANCING ON USED EQUIPMENT EMAIL jimtirone@fse-i.com

2014 Deere 650K, Stk# 23540, 2001 Deere 310SG, Stk# 23406, 2226 Hrs, Cab, 124” Bld, 3 Fun, 28” 3964 Hrs, Dble Door Cab, 6 Fun, Std Trk ............................$160,000 24” HD Bkt, 1.3yd Bkt ......$32,000

2014 Deere 310SK, Stk# 23314, 1155Hrs, 2FH, RC, PC, 1.3yd Bkt, 24” HD Bkt, 6FH, Aux Hyd $79,000

1988 Deere 690D, Stk# 23330, 2742 Hrs, Cab, 48” Bkt, 24” Std Trk, Med Arm ....................$28,500

2015 Deere 35G, Stk# 23550, 1995 CAT 938F, Stk# 31322, 11547 2015 Deere 624K, Stk# 23270, 1701 Hrs, 4’ 4” Arm, Angle Blade .. Hrs, QCPLR, 3.5yd JRB Bkt, Aux 828 Hrs, 3.5yd GP Bkt, 20.5 Tires, ..........................................$29,000 Hyd, RC, PC ......................$30,000 RC ..................................$160,000

2012 Deere 310K, Stk# 14426, 825 Hrs, 2FH, RC, PC, BCPLR, 1.12yd Bkt, 5FH, Aux Hyd $82,000

2010 Deere 540GIII, Stk# 23551, 2015 Deere 544K, Stk# 23266, 5736 Hrs, 23.1 x 26 Tire, Winch .... 1197 Hrs, Cab, 2FN, RC, 3yd Bkt.... ........................................$150,000 ........................................$126,500

1990 Deere 650G, Stk# 23357, 12604 Hrs, Std Trk 61”, 104” Bld, 18” Pads............................$29,000

2013 Deere 75G, Stk# 14821, 453 Hrs, 18” RBR, 6’ 11” ........$90,000

Pennsylvania Locations: Dunmore • Athens • Waterford • Williamsport New York Locations: Kirkwood • Syracuse • Rochester • Orchard Park For Our COMPLETE INVENTORY of Used Equipment with Photos and Detailed Descriptions visit www.fivestarequipment.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 47

F I N A N C I N G AVA I L A B L E 286 Central Ave., South Kearny, New Jersey 07032

800-255-5512 Phone 973-589-4100 • Fax 973-589-4811

E-mail: info@tes-inc.net • Website: www.tes-inc.net

2007 Kalmar DCE 140-6, 31,000 Lbs. @ 24” LC, Enclosed Cab w/Heater, CAT Diesel C6.6, Dana TE1300 Trans, 167” Triple Mast, SS/FP, 96” Forks .. ..........................................P.O.R.

2000 Manitowoc 2250, 300ton, Series III ctwt option, 260' boom, Cummins diesel, S/N: 2251051 ....................P.O.R.

2007 Manitou MT1745, 10,000 lb. capacity, 54’ max lift, repaint, enclosed cab ...... ..........................................P.O.R.

2001 Link-Belt RTC 8040 SII, 40-ton, S/N: F7J1-5291, 105’ main boom, 28’-51’ 2-piece jib, Hydro gas ride, Aux winch, Rear steer indicator.... ..........................................P.O.R.

1980 Manitowoc 4100W SII, 230-ton, S/N: 41649, 150' boom ................................P.O.R.

1999 Link-Belt LS248 HII, 200-ton, "C" ctwts, Ctwt removal system, 3rd drum, 200' main boom, 2 winch, S/N: H3I9-2238 ................P.O.R.

2007 Manitou M50-4, 10,000 lb. capacity, 4WD, 163” max lift w/ SS, enclosed cab, 48” forks..................................P.O.R.

2005 Manitex 1770C, 17- Ton, S/N 119511, 18,042 miles, Ford F750 210 HP CAT diesel, 23’ jib, 20’ wood deck ....P.O.R.

2008 Link-Belt RTC 8090, 90ton, 140’ main boom, 35’ – 58’ jib, 2 winches ..................P.O.R.

2009 Shuttlelift 3340B, S/N: 321134, 10.5-ton, Diesel engine, Independent outriggers, 13’-32’ boom w/12’-28’ jib, Block & ball, New York City swing lock ..............P.O.R.

2007 Demag AC200-1, S/N: 33167, 240-ton, Drive axle: 10x8x8, ZF automatic transmission, 6 cylinder diesel engine, 223’ main, 108’ jib ...... ..........................................P.O.R.

2007 Link-Belt 218 HSL, 110ton, 150’ main boom, “ABC” Ctwts, Block/Ball, diesel engine ..............................P.O.R.

Authorized Dealer


Page 48 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BRANDYWINE TRUCKS AND EQUIPMENT WE BUY EQUIPMENT!

(301) 372-0083 Shipping & Containerization Available

WE BUY TRUCKS!

WWW.BRANDYWINE-EQP.COM (2) Available

New Witzco Lowboys, Customization Available, 35-50 Ton in Stock ........$Call

2011 John Deere 450J LGP, EROPS, 6-Way Blade, Only 2000 Hrs, 24” Pad, Stk #863I ..................................$54,900

2008 Ingersoll Rand XP375WIR Air Compressor, 5782 Hrs, John Deere Diesel Engine, Great Running Unit........ ..................................................$15,900

2014 Komatsu D39EX-22 Dozer, 1234 Hrs, EROPS w/AC, Prepped for GPS, 6-Way Blade, 20” Pads ............$99,900

‘13 & ‘14 Volvo L60G Loaders, EROPS, A/C, Hydraulic Q/C, Great Rubber, 1900-2100 Hrs ..............$107,500 Each

2015 Volvo MC115C, Enclosed Cab, 182 Hrs, Aux. Hyd, 78” Bucket ................ ....................................................$35,000

2012 Caterpillar 328D LCR Excavator, CAT Hyd Q/C, 48” Bucket, 11' Stick, Aux Hydraulics, 5,071 Hours ........$145,500

2016 Bobcat E85 Excavators, 3 Available! Geith Hyd. Q/C, Geith 30” Bucket, Aux. Hyd, Backfill Blade, Rubber Tracks ..................$94,500 Each

2005 Komatsu WB140-2N Backhoe, 2,700 Hrs, One Owner, Enclosed Cab, 4x4, Extendahoe ......................$24,500

Unused Tasca THH3200B Hammer, To fit 336D Excavator / 32-42 ton excavators, auto lube pre disposition, two “Moil Point ‘M’ type” bits, one set of N2 Nitrogen charges ......................$28,900

2017 Cat 308E2 CR Excavator, 15 Hrs, Hyd Q/C, Aux Hyd, Dozer Blade, Rubber Tracks, 24” Bkt, NEW Machine!$104,000

2005 Komatsu WA250 PT-5 Wheel Loader, 8800 Hrs, EROPS w/AC, Aux Hyd, Hyd Q/C, Good Rubber....$49,900


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 49

DELAWARE Hofffman Equipment www.hofffmanequip.com fmanequip.com (800)-4-HOFFMAN MAINE Heavy Machines Inc. www.heavymachinesinc.com SKOWHEGAN (888) 875-3954 MASSACHUSETTS Boston Freightliner, Inc. www.bostonftl.com BOSTON (888) 267-3857

BROCKTON (508) 857-0280

MAR RYLAND YLAND Liebherr Equipment Source liebherrequipmentsource.com BALTIMORE (410) 379-3994 (866) 760-3101 NEW YORK Tracey Road Equipment www.traceyroad.com SYRACUSE (315) 437-1471 (800) 872-2390

ROCHESTER (585) 334-5120 (866) 950-6210

ALBANY (518) 438-1100 (866) 740-8853

WA W ATERTOWN (315) 788-0200 (888) 335-0200

BINGHAMTON (607) 775-5010 (800) 370-9488 Hoffman Equipment www.hofffmanequip.com fmanequip.com NEW YORK CITY (800)-4-HOFFMAN

MARLBORO (845) 236-3000

NEW JERSEY Hoffman Equipment www.hofffmanequip.com fmanequip.com PISCA AT TAWA WAY (732) 752-3600

WILLIAMSTOWN (856) 875-0036

PENNSYLVANIA VANIA RECO Equipment, Inc. www.recoequip.com CRANBERRY (724) 779-4646 Groff Tractor & Equipment. Inc. www.groffftractor ftractor.com MECHANICSBURG (717) 766-7671 (800) 33-GROFF (47633) EPHRATA TA (717) 738-0220 (888) 66-GROFF (47633) ST TA ATE COLLEGE (814) 353-8400 (888) 47-GROFF (47633) VIRGINIA Liebherr Equipment Source liebherrequipmentsource.com MANASSAS (703) 392-0111 (800) 838-7534

NEWPORT NEWS (757) 926-5124 (855) 474-7925 RECO Equipment Inc. www.recoequip.com (704) 399-7555 WEST VIRGINIA RECO Equipment, Inc. www.recoequip.com (724) 779-4646


Page 50 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

YOUR SOURCE FOR

SALES

AND

RENTALS

CRAWLER TRUCKS, STUMP CUTTERS AND FORESTRY MULCHERS

We Sell Buy, A Trad nd e

G CIN E N A FIN ILABL AVA

6240 Bristol Pike, Levittown, PA 19057 888-703-LIFT (5438) or 215-736-1698 www.EQSLLC.com / Mike@EQSLLC.com

Call. Many units available for sale or rent

2008 Genie S65, 2,640 2010 Genie GTH1056, 3700 hours, diesel, 65' platform Hrs, Enclosed Cab w/Heat, height, 4WD, 8' Basket .......... 50” Carriage, 48” Forks .......... ..................................$37,500 ..................................$64,500

2005 Snorkel S1930s, 10 Available, Electric, 19’ Platform Height, Extendable Decks ..........................$3,250

2012 JLG G1255A, 2978 2012 Skyjack SJ45T, 1,612 Hrs, Enclosed Cab w/Heat, Hours, Deutz Diesel, 4WD, 8’ Foam Filled Tires, 60” Basket, 45’ Platform Height.... Carriage, 60” Pallet Forks ...... ..................................$29,950 ..................................$84,500

2013 MEC 5492, 940 Hours, 54’ Working Height, Dual Sliding Decks, Diesel, 4WD .. ..................................$39,500

2008 JLG 800S, 2337 Hours, Deutz Diesel, 4WD, 8’ Side Entry Basket, Foam Filled Tires ..........................$44,500

2013 Cat 252B, 3327 Hours, Dealer Invoiced at $124,000! Heat & AC, 2 Speed, Hydraulic Hammer, New Tires ..................................$22,500

2012 CAT TL1055, 2,229 hours, enclosed cab w/ heat, CAT turbo diesel, Hyd. Quick Coupler From Inside Cab, Fender and Light Kit..$74,500

2011 Genie S125, 2750 Hours, 125’ Working Height, Deutz diesel, 4x4, Foam Filled Tires ................$84,500

2008 Peterbilt 385, LOW MILES!, Cat C13, 14,000 Front Axle, 44,000 Rears, 10 Speed, Air Ride, PTO, Head Ache Rack, Boxes, All Alcoas, 355,795 Miles ............$39,500

• Outside painting and repairs • • No job is too big or too small • • Direct shipment of OEM parts • • Factory and Custom decals • CALL -

800.392.2686

VISIT -

OVER 200 PIECES OF NEW AND USED EQUIPMENT OVER 10 ACRES!


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 51

SAVE TIME SAVE MONEY SAVE LABOR SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA

1986 Blaw-Knox RW195C Road Widener

2008 Caterpillar 314C LCR Hydraulic Excavator

Detroit Diesel, New Belt & New Tires ..........$45,000

Auxiliary Hydraulics, Quick Coupler, A.C., Blade. Approx. 6000 Hrs ........................................$72,500

2002 Caterpillar CB-634D Compactor

2006 Caterpillar 320CL Hydraulic Excavator

ROPS, Double Drum ................REDUCED to $32,500

Auxiliary Hydraulics, Quick Coupler, A.C. Approx. 8800 Hrs ......................................................$74,500

1994/2000 Galion 150FA Rough Terr. Cranes

1998 Link-Belt RTC-8050 Rough Terrain Crane

4 Available, 60' Boom ..............Priced from $19,500

50 Ton, 110’ Boom, 56’ SA, 2 Hoists, Auxiliary Hydraulics ................................REDUCED to $85,000

INTRODUCING FlangeLock Tool Boxes TM

4 Tool Boxes Available All Include Slugs and O'Rings.

TO VIEW OUR ENTIRE INVENTORY For more information contact Mike Pearl at 914.980.8890 or email mike@flangelock.com

www.flangelock.com

VISIT www.equipmentmartofny.com

203/335-0100

EQUIPMENT WANTED Fax: 203/335-7996

Answering Machine 24 Hours E-mail us at equipmart@aol.com


Page 52 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mayor Bowser, Partners Formally Launch DC Infrastructure Academy Washington, D.C., Mayor Muriel Bowser signed a mem- Infrastructure Academy, laying the groundwork for wellorandum of intent to formally launch the DC Infrastructure paying jobs and successful careers,” said David Velazquez, Academy, a partnership between D.C. government and util- president and CEO of Pepco Holdings. “As a local company, ity, union, university and private sector partners that will cre- it’s our job to keep the lights on and the doors of opportunity ate a pipeline to in-demand infrastructure jobs for district res- open for district workers and families from every neighboridents. hood.” “Through the DC Infrastructure Academy, we will spread “Exelon is empowering communities and creating opporprosperity by getting more D.C. residents trained for good- tunities for people where we live and work,” said Bill Von paying, long-term careers,” said Bowser. “The infrastructure Hoene, senior executive vice president and chief strategy industry is one of the fastest growing industries in the coun- officer of Exelon. “When we joined forces with Pepco, we try, and last year, half of D.C.’s open infrastructure jobs went committed more than $5 million for job creation and trainunfilled. The DC Infrastructure Academy will give D.C. res- ing. The Infrastructure Academy will enable hundreds of idents the chance to learn the nuts and bolts of what makes people to develop the skills to work in areas that will remain our city run — everything from utilities to transportation and logistics to operations and green technologies — and ensure that they “The DC Infrastructure Academy will are first in line when it comes to securing the give D.C. residents the chance to learn the infrastructure jobs of today and tomorrow.” The DC Infrastructure Academy will bring multiple infrastructure related work- nuts and bolts of what makes our force development activities together under city run...” one roof to provide D.C. residents with highMayor Muriel Bowser quality, specialized trainings and programs, Washington, D.C. with a focus on underserved, underemployed and unemployed residents. Modeled after similar successful programs in Chicago, Philadelphia and critical to supporting a city like Washington and put them on Georgia, the DC Infrastructure Academy will provide resi- a path to a good-paying career.” dents with the necessary skills to obtain and maintain careers The Mayor was joined at the launch by Deputy Mayor for in one of the fastest growing industries in the nation. Greater Economic Opportunity Courtney Snowden; The infrastructure industry, which is currently experienc- Department of Employment Services Director Odie Donald ing a gap between open positions and available workers to II; Senior Executive Vice President and Chief Strategy fill them, is one of the fastest growing industries in the Officer at Exelon Corporation, Bill Von Hoene Jr.; President nation. Nationally, energy efficiency firms project 14 percent and CEO at Pepco, David Velazquez; President of the sector growth and the addition of 257,000 jobs over the next Metropolitan Washington Council, AFL-CIO, Jackie Jeter; year. In 2016, more than half of Washington, D.C.’s open President and COO at Washington Gas, Adrian Chapman; infrastructure positions went unfilled. The average hourly UDC President, Ronald Mason Jr.; General Manager at wage for an infrastructure worker in the district is $48.45. WMATA, Paul Wiedefeld; and General Manager at DC “The promise of the infrastructure industry is real,” said Water, George Hawkins. Deputy Mayor Courtney R. Snowden. “Approximately 2.7 The DC Infrastructure Academy builds on a series of million infrastructure workers are expected to retire or leave efforts and initiatives developed by the Bowser their jobs over the next decade. In D.C., we stand ready to Administration to get D.C. residents connected to careers in train our residents and create a pipeline to good paying, qual- the infrastructure industry. In July, the Mayor kicked off the ity careers through this innovative partnership.” first cohort of Solar Works DC, a job training program that The Infrastructure Academy is being funded by the installs cost-saving solar energy systems on the homes of Mayor’s $16.75 million commitment in the city’s capital low-income residents. budget and a $5.2 million contribution to workforce develA joint effort between the Department of Energy and opment programs that Pepco provided in the Exelon-Pepco Environment (DOEE) and the Department of Employment merger preceding. In addition, Pepco and Washington Gas Services, Solar Works DC provides on-the-job technical have agreed to provide $500,000 each in cash contributions, training while reducing energy costs for up to 300 D.C. resdonated human resources, equipment, and other in-kind idents by as much as $600 annually. In April, the Bowser materials and services over the first five years of the acadeAdministration, in partnership with Pepco Holdings and the my’s operation. The Department of Employment Services will operate the University of the District of Columbia Community College DC Infrastructure Academy and work with public and pri- (UDC-CC), launched the DC Quick Path to Energy vate sector partners to align trainings and programs. By the Program, a workforce development training program that end of the first quarter of 2018, the District will establish an connects residents to employment in the utilities industry. interim infrastructure academy, located east of the Anacostia Since January 2015, the unemployment rate in River. This site will serve as a temporary home until a per- Washington, D.C., has dropped by 1.1 percentage points, manent facility is completed. including decreases in all eight wards. “Pepco and Exelon are proud to partner with Mayor (This story also can be found on Construction Equipment Bowser and the D.C. government to develop the Guide’s website at www.constructionequipmentguide.com.)

Valley JCB

Northland JCB

1109 Middle River Rd. Baltimore, MD 21237 800/633-5077 20332 Leitersburg Pike Hagerstown, MD 21742 800/336-7414 8192 Euclid Court Manassas Park, VA 20111 800/300-5579 www.valleyjcb.com

6 Jonspin Road Wilmington, MA 01887 01887-1057 800/225-7956 978/658-5900 230 Cherry Street Shrewsbury, MA 01545 800/698-8517 508/842-3880 3 Chalet Rd. (Route 44) Middleboro, MA 02346 800/489-8000 781/341-0321 23 Foss Road Lewiston, ME 04240 800/640-6050 207/784-1501 114 Hall Street Concord, NH 03301 877/767-0655 603/717-0390 150 North Plains Industrial Rd. Wallingford, CT 06492 888/828-7767 203/626-7670 www.northlandjcb.com

Liftech JCB 6847 Ellicott Dr. E. Syracuse, NY 13057 315/463-7333 4381 Walden Ave. Lancaster, NY 14086 716/684-9040 241 Paul Rd. Rochester, NY 14624 585/328-6380 2820 Curry Rd. Schenectady, NY 12303 518/356-5932 33B Commerce Ave. S. Burlington, VT 802/864-0308 www.liftechequipmentjcb.com

Edward Ehrbar, Inc. 4 Executive Plaza Yonkers, NY 10701 914/738-5100 42 Kenosia Ave Danbury, CT 06810 203/743-0088 601 Coates Avenue Holbrook, NY 11741 631/563-7600 www.ehrbar.com

MH JCB 126 Lakeview Dr. Charleston, WV 25313 304/776-6900 www.mhjcb.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 53

CHA ANGIN NG THE E

LA L AND A AN D CAP DSC PE

The one and a only JCB T Teleskid eleskid is changin changing ng the way landscapers work. Whether you y work in landscape design, soil preep, sod and tree installation or nurseriees and gardens, the all new w JCB Teleskid Teleskid offers ultimate versatility versatilittyy.. With a telescopic boom, now you can load pallets of sod into a pickup truck, reach over obstacles like silt fences without doing any dam mage, load dump trucks from m one side and work below grade to kkeep your machine on safe ground. And A as with any JCB machine, the T Teleskid eleskid has the attachments you need to accomplish any job. Contact Conntact your local JCB dealerr to demo this game changing piece o of equipment.

Earthborne JCB

Farm-Rite, Inc.

35 Easton Rd. Warrington, PA 18976 215/343-2000 www.earthborneinc.com

122 Old Cohansey Rd. Shiloh, NJ 08353 800/752-6373 3853 Middle Country Rd. Calverton, NY 11933 631/284-3127 www.farm-rite.com

/JC CBNA

@ @JCBNA

JCBNA

Stephenson JCB & Walsh JCB 7201 Paxton St. Harrisburg, PA 17111 800/325-6455 135 Lincoln Ave. Prospect Park, PA 19076 800/220-4033 137 Armstrong Rd. Pittston, PA 18640 866/667-6756 www.stephensonequipmentjcb.com

796 Unionville Rd. Prospect, PA 16052 724/865-9221 2350 Munster Rd. Lilly, PA 15946 814/886-5191 www.walshequipmentjcb.com

4541


Page 54 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

3900 Ben Hur Avenue, Unit 3 Willoughby, Ohio 44094 t. 440.954.9923 f. 440.954.9929

4401 Etiwanda Avenue, Unit C Mira Loma, California 91752 t. 951.681.0908 f. 951.681.0908

WWW TOKU AMERICA COM STRIK KER BREAKER SYSTTEMS

BUIILLTT QUARRY TOUGH H

s #USTOMIZED BREAKER SYSTEMS s $ESIGN TO SUIT ANY MOUNTING FOOTPRINT s #USTOM INTEGRATED COLUMNS TECHNOLOGY s 3TANDARD REMOTE CONTROLS

s !CCUMULATOR FREE DESIGN s 3IMPLE DESIGN TWO MOVING PARTS s !NTI BLANK BLOW TECHNOLOGY s ,ESS MAINTENANCE

Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15

Made in the USA

Protect cylinders from the elements • Eliminate dings and dents from falling debris •  Reduce particle contamination of hydraulic systems •  Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

The SEAL SAVER WILL:

STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in

2012 CAT 312EL #130-15086, 5,319 hrs., Cab, air, reach boom, 9’2� stick, aux hyd, Cat QC, 28� TBG’s, long u/c, bkt ......................$92,500

2012 CAT 307D #130-15051, Cab, air, std boom, 7’3� stk, aux, hyd QC, hyd thumb, 18� TBG-drilled, blade, bkt ......................$69,500

Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062 Fax: 770-509-5832

2012 VERMEER BC1000XL #145-00789, 506 hrs., Cummins 3.3L diesel, Smart Feed, 12�x17� feed opening ..............$25,000

1-800-683-5189

Visit

www.sealsaver.com

for more information or contact us at 1-800-683-5189

Farmington (Rochester), New York Fax: 585-924-7624 Email: jfinlon@americanequipmentllc.com

585-466-4902 www.americanequipmentllc.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 55

GET IT RIGHT R THE FIRST TIM M ME

EVE ERYT YTIME E GAIN IMPROV VED EFFICIENCY AN ND PRODUCTIVITY FROM YOUR CURRENT C EQUIPMEN NT AND OPERATOR T RS S. Yo our Northeastern n SITECH Dealer is your Auth horized Trimble and AccuGrade Machin ne Control & Guidance provvider. They are a one-stop technology solutio on provider for a contractorr’s entire fleet of heavy equipment regardless of machine brand.

SIITECH S SITECH TE ECH EC E CH Nor No N orth he hea h ea as stt

S ITECH EC CH Met M ettro oNo N o th or the eas st S ECH SITEC Allleg A eg ghen g h hen ny

These include 2D and a 3D grade-control, pavin ng control, site positioning, constrruction asset management and a marine construction systems as well as supporting infrastructure a systems, and data prep solutions. solutions

Yo our Constructtion Te echnology Provid der SITECH NORTHEAST MA, ME, NH, VT T,, RI, RII, Upstate NY 855-748-3244 SITECH METRO NO ORTHEAST T,, LLC CT T,, Lower NY Y,, NJ, Northern N DE, Eastern P PA A 855-748-3241

www.SITECH-LOCA AT TO OR.com

SITECH ALLEGHENY NE, Central and Westerrn P PA, A, Northern WV 855-417-0290


Page 56 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cianbro Opens New Workforce Development Facility in Maine

Authorized Bobcat Dealers

CONNECTICUT

Bobcat of North Jersey

Bobcat of Connecticut, Inc.

Totowa 973-774-9500 • 877-9-BOBCAT

East Hartford 860-282-2648

www.njbobcat.com

www.bobcatct.com

Garden State Bobcat, Inc. Freehold 877-GSB-BCAT

Bobcat of Stratford Stratford 203-380-2300

www.gardenstatebobcat.com

www.bobcatct.com

NEW YORK DELAWARE

Bobcat of Central New York

Bobcat of New Castle

East Syracuse 315-437-2829

New Castle 302-319-5450

www.bobcatofcny.com

www.gardenstatebobcat.com

Bobcat of the Twin Tiers

Cinabro photo

Cianbro has outgrown its educational facilities and is now set to unveil its new workforce development center based within the remodeled spaces of the former UTC Tech Center building in Pittsfield, Maine.

In an era of chronic shortages of skilled craftsmen and women in the construction industry, Cianbro has used in-house educational efforts over the years to develop thousands of highly qualified construction professionals. Because of the company’s growth and the intense demand for training, Cianbro has outgrown its educational facilities and is now set to unveil its new workforce development center based within the remodeled spaces of the former UTC Tech Center building in Pittsfield, Maine. The addition of the new facility will allow the company’s workforce development department — The Cianbro Institute — to base future educational initiatives from within the facility’s new fully-equipped classrooms, office spaces for instructors, and spacious areas for larger educational gatherings. Cianbro plans to continue efforts to ease the region’s worker-shortage through the use of the new facility. Gov. Paul LePage and other distinguished guests joined Cianbro leaders Pete and Andi Vigue for a ceremony and tours to commemorate the new facility. The event began with remarks at the podium. “We believe that the challenges that we face with the workforce in our country and state are disguised opportunities,” said Cianbro Chairman and CEO Pete Vigue. “And we believe that it is our responsibility within this organization and within our industry to invest in the development of our future workforce while providing them an opportunity for personal growth. What we've learned when we support and believe in people is that the opportunities are endless, not only for individuals but also for our company.” Until now, the Cianbro Institute has utilized space within the company’s Operational Services Building in Pittsfield,

in combination with classrooms located at North Lancey Street. At these locations, the Institute has conducted sessions ranging from new hire orientation and craft education to leadership development. Once the team is moved into the new facility, the core of Cianbro’s workforce development programs will exist under one roof where instructors and the support team will work together in close proximity. In addition, the new location provides some simple efficiencies such as eliminating travel and setup time between facilities, better management of classrooms, better communication among the team, and a loading dock to offer the ability to move necessary equipment in and out for classroom use. As Cianbro continues to extend its reach as a company (currently working in more than 40 states), it will be critical for instructors to have the ability to deliver certain developmental opportunities remotely or via broadcast. By having multiple rooms equipped with cameras, this option will become a reality, giving Cianbro the opportunity to reduce travel costs, reach more team members at one time, and cut down on time away from a project. Additionally, the facility will have a skilled-trades multi-functional room to conduct a variety of hands-on educational sessions. For example, rigging is an important skill to develop across many of the trades. The multi-functional room will offer the ability to set up 16-ft. gantries for indoor demonstrations and activities. The possibilities for this room are plentiful, as are all of the many potential uses that the new Cianbro Institute facility brings to the company. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Horseheads 607-733-6572

MARYLAND Metro Bobcat, Inc. Eldersburg 410-795-1500 Forestville 301-568-1104 Gaithersburg 301-840-9300 White Marsh 410-483-0600

www.bobcattwintiers.com

Summit Handling Systems, Inc. Walden 845-569-8195 www.summitbobcat.com

Warner Sales & Service Rome 315-336-0311

www.metrobobcat.com

www.warnerss.com

MASSACHUSETTS Bobcat of Greater Springfield

PENNSYLVANIA

West Springfield 413-746-4647

Bobcat of Lancaster Ephrata 717-859-4646

www.bobcatct.com

Bobcat of Worcester

www.bobcatoflancaster.com

Worcester 508-752-8844

Highway Equipment & Supply Co.

NEW HAMPSHIRE

www.hwyequipbobcat.com

Drums 570-788-1127 • 888-854-0327

Bobcat of New Hampshire Hudson 603-224-1234

Reading Tractor and Equipment Leesport 610-926-2441

www.bobcatnh.com

www.readingtractor.com

NEW JERSEY Bobcat of Central Jersey

RHODE ISLAND

Green Brook 732-752-0002

Bobcat of Rhode Island

www.gardenstatebobcat.com

Warwick 401-921-4300 www.bobcatct.com

Bobcat ®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries. ©2017 Bobcat Company. All rights reserved. | 53663-5


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 57

EVO OLUTIO U IONARY R PERFOR O MANCE NEW NE EW W BO BOB BOBC BC CAT AT R-SERI R--SEER RIIEES ES LIFTS LLIFFT TS SP PEERF PERFO FO ORM RMA RM ANCE NC CE EH HIIG HIGH GH HEER ER.. New R-Series compact exca avvators feature durable, smoother-riding tracks that also improve over-the-side capacity, digging ability and slewing performance. R you ready for the revolut u ion?

See why R-Series excavators w work harder: Bobcat..com/MyR-Series B obcat ®, the B obcat logo and the colors of the B obcat machine are registered trademarks of B obcat C ompany in the U nited S tates and various other countries. © 2017 B obcat C ompany. A ll rights reser ved. | 5 3 6 6 3- 4


23 Oshkosh Front Discharge Mixers for Sale

Page 58 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

PRICES REDUCED

(3) 2000 Oshkosh Front Discharge Mixers, Model: FCM-7133, Engine: Mack E-7 375HP, Trans: Allison HD-4560........................$45,000 (2) 2000 Oshkosh Front Discharge Mixers w/Trainer Cab, Model: FCM-7133, Engine: Mack E-7 375HP, Trans: Allison HD-4560 $47,500 (5) 2002 Oshkosh Front Discharge Mixers w/Trainer Cab, Model: FCM-7133, Engine: Mack E-7 375HP, Trans: Allison HD-4560 $52,500 (1) 2003 Oshkosh Front Discharge Mixers, Model: S-2346, Engine: Cummins ISM 350HP, Trans: Allison HD-4560 ....................$55,000 2004 to 2006 Mack Day Cab Tractors for Sale NEW BALDOR CRUSHER MOTOR, CX613, CXU613 & CSN613 Available (12) 2003 Oshkosh Front Discharge Mixers, Model: FCM-7133, Engine: Mack E-7 375HP, Trans: Allison HD-4560......................$55,000 400hp, 500RPM, Direct Drive Shaft Call for Pricing

Silvi Group Companies Fairless Hills, Pennsylvania

Tim Kurz 267-566-1802 • tkurz@silvi.com

www.silvi.com

2012 ANACONDA DF512, 2 DECK 5X12 2100 HRS, #8396$119,000

2013 VOLVO EC160DL, Clean ..............................................$93,000

POWERSCREEN WARRIOR 1400 ........................................$89,500

NEW FINLAY 694+ 6X20 3 DECK, #FN165 ............................$CALL

FINLAY 693 6X20 2 DECK, #FN135 ..................................$219,000

FINLAY J1160 26X40 JAW, 600 HOURS, #FN139 ..................$CALL

CALL DAN ROTT: 978-479-5192 or Email: rott@chadwick-baross.com For our entire used equipment inventory, check out our website: www.cbused.com

BANGOR, ME CARIBOU, ME CHELMSFORD, MA CONCORD, NH WESTBROOK, ME


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 59

Get parts for the heart of your machine at perkins.com/shop

With perkins.com/shop, you can quickly buy the parts you need all in one place – direct from Perkins. It’s the best way to keep the heart of your machine running strong. And you’ll be up and running quickly with fast delivery. Visit perkins.com/shop and start buying now.

Perkins Aftermarket, engineered for life


Page 60 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Officials Open New $5.3M I-95 Interchange in Maine Due to Innovative Partnership

MILTON CAT www.miltoncat.com

Due to an innovative business partnership program, the Maine Department of Transportation was able to open a new Interstate 95 interchange in Waterville, north of Augusta. The agency said the interchange for Exit 124 at Trafton Road allows direct access to I-95 and will help to foster business growth opportunities within the area. “This is an exciting opportunity for businesses in the area to utilize this new interchange,” said David Bernhardt, state DOT commissioner. “The city of Waterville and surrounding communities now have a new point of access that allows an easy connection to the interstate, saving time and direct fuel costs which will positively affect their bottom line.”

Maine DOT photo

“This is an exciting opportunity for businesses in the area to utilize this new interchange,” said David Bernhardt, state DOT commissioner.

The $5.3 million project was funded by the Maine DOT along with the U.S. Department of Commerce’s Economic Development Administration, the city of Waterville and Trafton Properties — which utilized the Maine DOT’s Business Partnership Initiative.

The state DOT described that Business Partnership Initiative as “a one-third state, two-third business/municipal demand response program, designed to respond to municipal/business entity requests such as responding to changing local trans-

portation needs on state and state-aid highways, developing economic opportunities and relieving safety concerns on or adjacent to these highways.” The program is designed to promote public/private partnerships between the department and municipalities, public utilities, private businesses and other entities by leveraging additional resources on a voluntary basis to match limited state resources. “It will make improvements to state and state-aid highways often utilizing more flexible project delivery methods when the nature of the highway and project allow” the department said. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

RIDOT Completes Road Repairs Early The Rhode Island Department of Transportation (RIDOT) joined with state and local officials to celebrate the early completion of the High Street and Kingstown Road Improvements project in South Kingstown. The much-needed repair for 1.3 mi. of roadway in the villages of Wakefield and Peace Dale finished in August, approximately two months ahead of schedule and about $300,000 under budget. “I’d like to congratulate

Multi One Articulated Loaders In Stock JD 500 Backhoe JD 450B Loader 215/679-5958 JD Equipment www.jdequip.com

our project management team for their diligent work that allowed us to finish this work early while staying on budget,” said Peter Alviti Jr., RIDOT director. “And thanks to the funding provided by the RhodeWorks program, we can check two more roads off the list of bad roads in Rhode Island.” These two roads had historic street flooding problems, which contributed to deteriorated pavement conditions. The driving surface had gotten so poor that following the severe winter of 2015, RIDOT had to invest $81,500 to patch large sections of pothole-ridden roadway to keep it passable until this project could begin. “The town of South Kingstown is truly appreciative of the state’s efforts in bringing the High Street and Kingstown Road Improvements project to fruition,” said Stephen A. Alfred, South Kingstown

town manager. “These critical arterial/collector roads have suffered poor pavement and drainage conditions for many years. We applaud RIDOT’s entire project team that, under the leadership of Director Alviti, worked tirelessly in seeing that these muchneeded improvements were completed, all for the betterment of the entire community — residents, businesses and visitors alike.” In addition to drainage improvements, the $6.5 million project focused on pavement replacement; Americans with Disabilities Act (ADA)-compliant sidewalk installation; and the addition of new signing and striping. Work also included the installation of school zone flashing signs to call more attention to the school zone for passing motorists during normal school hours at the Wakefield Elementary School.

The project area encompasses 1 mi. on High Street, from Main Street to Route 108 (Kingstown Road), and 0.3 mi. on Route 108 (Kingstown Road) from High Street to North Road. This fall, RIDOT expects to wrap up work on an additional project design to minimize the impact of stormwater runoff from these roads into the nearby Saugatucket River. This $715,000 project involves the installation of three stormwater treatment areas in the Saugatucket River watershed, and is on budget and on schedule, set to finish in November. These improvements will result in a net improvement in water quality around the river, which flows through the heart of South Kingstown and into Point Judith Pond. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Contractor and recycling customers in ME, RI, VT, NH, MA and state of NY , excluding New York City and surrounding counties 100 Quarry Drive Milford, MA 01757 508-634-3400 14 Kendrick Road Wareham Industrial Park Wareham, MA 02571 508-291-1200 84 Concord Street North Reading, MA 01864 978-276-2400 2158 Plainfield Pike Commerce Park W #10 Cranston, RI 02920 401-946-6350 Route 2, One Cat Lane Richmond, VT 05477 802-434-4228 30 Industrial Drive Londonderry, NH 03053 603-665-4500

16 Pleasant Hill Road Scarborough, ME 04070 207-883-9586 79 Robertson Blvd. Brewer, ME 04412 207-989-1890 500 Commerce Drive Clifton Park, NY 12065 518-877-8000 294 Ainsley Drive Syracuse, NY 13210 315-476-9981 55 Industrial Park Drive Binghamton, NY 13904 607-772-6500 4610 E. Saile Drive Batavia, NY 14020 585-815-6200

H.O. PENN MACHINERY CO., INC. www.hopenn.com Contractor and recycling customers in lower thirteen counties of NY state, and in the state of CT 122 Noxon Road Poughkeepsie, NY 12603 845-452-1200 699 Brush Avenue Bronx, NY 10465 718-863-3800 783 Bloomingburg Road Bloomingburg, NY 12721 845-733-6400 660 Union Avenue Holtsville, NY 11742 631-758-7500 225 Richard Street Newington, CT 06111 860-666-8401 Contact our Aggregate Specialists In CT call Scott Gilligan 860-461-6534 In NY state call Kevin Kretschmer 646-315-2284


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 61

MELLOTT COMPANY www.mellottcompany.com Aggregates, quarry, contractor & recycling customers in MD, VA, WV, DE, and NC. Aggregates and quarry customers in NJ and NY, excluding New York City and surrounding counties. 100 Mellott Drive Warfordsburg, PA 17267

4501 Green Point Drive Greensboro, NC 27410

Metso’s Lokotrack® LT106™ jaw crusher: Meeting your demands for high capacity with maximum efficiency That’s how we make the big difference, the Metso Way.

541 Farmview Lane Mount Joy, PA 17552

800-634-5634

FOLEY, INC. www.foleyinc.com Contractor and recycling customers in the state of NJ 855 Centennial Avenue Piscataway, NJ 08855 info@foleyinc.com

732-885-5555

Improve the efficiency and profitability of your crushing operation with the redesigned Lokotrack® LT106™ jaw plant. New features, including a radial side conveyor, high inertia flywheels, and an IC700™ process control system, ensure high productivity, user-friendly operation, and good mobility in tough crushing applications. The LT106 is also available with Metso’s Fleet Management technology, providing remote monitoring of functions, parameters, and location for more efficient operation. Find out more about profitable crushing at metso.com/showroom/aggregates #TheMetsoWay

WHITNEY & SON, INC. www.whitneyandson.com Aggregates and quarry customers in CT, MA, ME, NH, RI, & VT 95 Kelley Ave. Fitchburg, MA 01420

800-245-5472 978-343-6353 info@whitneyandson.com

CB

Con-Agg

CB CON-AGG www.cbconagg.com Aggregates, quarry, contractor and recycling customers in the state of PA 5300 Paxton Street Harrisburg, PA 17111 717-564-2121

4565 William Penn Hwy. Murrysville, PA 724-327-1300

Old Town Rd & Rte. 879 Clearfield, PA 814-765-1611

168 Industrial Park Road

11 Progress Drive Cranberry Twp., PA 724-776-7660

2955 Stewart Drive State College, PA 814-237-8338

3950 Depot Road Erie, PA 814-898-3388

Rt. 54 & I 180 (Exit 5) Turboville, PA 570-538-2551

1500 S. Altamont Blvd. Frackville, PA 570-874-3560

Wilkes-Barre Twp. Blvd. Wilkes-Barre, PA 570-822-8141

145 Rose St. Indiana, PA 724-463-8743

4326 Oregon Pike Lancaster, PA 717-859-4905

3105 Route 219 Lantz Corners, PA 814-778-5250

309 Foothills Lane Mount Pleasant, PA 724-696-4080

US Rt. 6 East Mansfield, PA 570-662-7171

441 Route 315 Hwy. Pittston, PA 570-883-1044

Somerset, PA 814-445-7915


Page 62 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Kobelco to Double Production at U.S. Facility by 2018 Kobelco USA is continuing its commitment to providing customers with quality products from its North American excavator production facility with plans to nearly double manufacturing capacity by 2018. Mass production at the Spartanburg, S.C., facility began in 2016 with conventional machines weighing 20-plus tons. Over the past year, Kobelco has increased production capacity by threefold as the facility is ramping up to produce 1,800 units/year. Today, seven excavator models are being produced at Kobelco’s U.S. manufacturing facility — the SK210LC-10, SK210LC-10 Long Reach, SK260LC-10 Long Reach, SK300LC-10, SK300LC-10 High & Wide, SK350LC-10 and SK500LC-10. Kobelco will increase manufacturing capacity in late fall of 2017 with the addition of the SK500LC-10 unit with removable counterweight as well as the SK210LC-10 High & Wide. And by 2018, production capacity will include a total of 11 models with the addition of the SK170LC-10 and SK260LC-10 excavators. “In a short period of time, we went from land and dirt to a factory with excavator production in full swing,” said Pete Morita, vice president — excavator division of Kobelco USA.

“We continue to increase U.S. production capacity, expand our U.S. manufacturing team and keep our dealers and customers up and running by delivering excavators that

are built like no other excavators in the industry. This is an exciting time for Kobelco USA as we implement aggressive plans to further our growth and momentum in 2018.”

Production capacity at the Kobelco USA excavator production facility will include a total of 11 models by 2018.

Kobelco’s U.S.-based manufacturing facility also allows the company to support the Association of Equipment Manufacturers (AEM). And as a participant of the AEM I Make America campaign, Kobelco has created more than 100 new jobs to date for the skilled workforce living in the communities that surround the Greenville and Spartanburg area. Kobelco currently is conducting another phase of hiring, which will welcome more than 20 new employees in all operational areas including fabrication, paint, assembly and warehouse. The Kobelco U.S. production facility plans to steadily increase the number of employees during the next year. Kobelco Construction Machinery USA offers crawler excavators in the 3,000 to 245,000 lb. classes, including zero tail swing, compact, standard, long-reach, mass excavation and demolition models. Wellknown as the excavator authority, Kobelco is committed to producing quality machines with advanced productivity-boosting features and innovative technologies. For more information call 281/888-8430 or visit www.Kobelco-USA.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

JLG Opens East Coast Parts Distribution Center in ATL JLG Industries Inc., an Oshkosh Corporation company and a global manufacturer of aerial work platforms and telehandlers, opened its new east coast parts distribution center in Atlanta. The 316,000-sq.-ft. distribution center will stock more than 65,000 SKUs. The parts offering from this facility will include all products from the JLG Genuine, JLG Reman, and MaxQuip lines. All available parts can be shipped next-day delivery in North America. “Opening this new distribution center, in addition to the Las Vegas facility opened earlier this year, supports our overall plan to strategically place facilities in areas that result in better service for our customers,” said Jonathan Dawley, global vice president, aftermarket of JLG Industries Inc. “Assigning our customers to the closest distribution center will result in improved parts availability, quicker delivery times and, in many instances, lower freight costs.” The new facility began shipping parts on July 5 to select areas. Shipments from the Atlanta-based PDC will ramp up over time, with the expectation that it will be fully operational by mid-September. Customers will continue to use JLG’s convenient Online Express customer portal

or retail order hotline (877-JLG-LIFT) to place parts orders for new or remanufactured JLG and competitive-make parts. Orders will be shipped from the nearest JLG parts location directly to the customer. Shipping options remain the same. “We anticipate our new multi-warehouse parts distribution network will enable us to better serve the needs of JLG customers

across the country, resulting in improved uptime and a reduced total cost of ownership,” said Dawley. According to Dawley, customers will be assigned a primary warehouse based on their zip code and its proximity to a distribution center. In general, western states will be served by the Las Vegas facility and eastern states by the Atlanta center, with allocation

logic based on maximum uptime. Currently, all international shipments are initiated from JLG’s Orville, Ohio-based distribution center. These shipments will transition to the new Atlanta-based parts center over the next few months. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

JLG Industries Inc., an Oshkosh Corporation company and a global manufacturer of aerial work platforms and telehandlers, opened its new east coast parts distribution center in Atlanta.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 63

Visit our website for more attachments!

www.nationalattachments.com

www.jescoditchwitch.us 118 St Nicholas Ave. • South Plainfield, NJ 07080 908-753-8080 • FAX 908-753-7853 Shrewsbury, MA 508-719-0200 Middletown, DE 302-376-0784 Beacon, NY 845-831-1800

Deer Park, NY 844-482-0910 Fairfield, NJ 973-227-2221 Lumberton, NJ 800-241-7070

We have an Extensive Used Inventory!


Page 64 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Deacon Equipment Co. CALL: 888-233-2266 Located In: Bloomsburg, PA 15 Katrina Road • Chelmsford, MA 01824 800-804-0775 64 Cambridge Drive • Monroe, CT 06468 855-281-2211 www.chadwick-baross.com

New Morbark Beever M20R with a CAT 350HP Tier 4F Engine …CALL

121 Karner Road • Albany, NY 12212 518-456-1445 • 888-468-5479 www.contractorssales.com

252 Atlantic City Blvd. • Bayville, NJ 08721 732-361-4487 322 Spring Valley Road • Old Bridge, NJ 08857 732-591-2088 www.jerseyrents.com

New Morbark 3400XT Wood Hog with a CAT 765HP Tier III Diesel Engine …CALL Exclusive Morbark Dealer

Visit: www.deaconequipment.com

Vermont-Based BlackRock Construction Ranks No. 42 on Exclusive 2017 Inc. 5000

Inc. magazine ranked Vermontbased construction and development company, BlackRock Construction, at number 42 out of 5,000 companies its with 6,611.25 percent growth on 36th annual Inc. 5000 list, an exclu sive ranking of the nation’s fastest growing private companies. The list represents a comprehensive look at the most important segment of the econo independent entre- my — America’s preneurs. “We couldn’t be more excited to have our rapid growth at BlackRock through the Construction recognized Inc. 5000,” said Tom Hergenrother, co-owner of BlackRock Construction. “It’s a big day for our company. We are so proud to have landed in the top 50 of America’s com- fastest-growing panies, alongside other remarkable organizations. We continue to look

454 Route 13 South • Milford, NH 03055 603-673-2640 251 Route 125 • Brentwood, NH 03833 800-616-5666 391 Loudon Road • Concord, NH 03301 800-358-6007 www.chappelltractor.com

159 North Avenue • Skowhegan, ME 04976 207-858-0051 • 1-888-875-3954 www.heavymachinesinc.com

Washington Air

forward to transforming more lives in American Dream is still alive,” said Compressor Rental Co. Vermont and beyond and are grateful Eric Schurenberg, Inc. president and 12529 Parklawn Dr. • Rockville, MD 20852 for how far we’ve come so quickly.” editor-in-chief. “The founders and 301-230-5800 The 2017 Inc. 5000, unveiled CEOs of the Inc. 5000 tell us they 1800 4th St. NE • Washington, DC 20002 and with the top 500 think determination, risk taking, and 202-635-1500 online at Inc.com companies featured in the September vision were the keys to their success, 4622 42nd Pl. • Hyattsville, MD 20781 301-277-1300 issue of Inc., is the most competitive and I believe them.” 7304 Grove Rd. • Frederick, MD 21701 crop in the list’s history. The average The list represents a unique look at 301-662-7711 company on the list achieved a mind- the most successful companies within 44180 Wade Dr. • Chantilly, VA 20152 boggling three-year average growth of the American economy’s most 703-742-6200 481 percent. The Inc. 5000’s aggre dynamic segment — its independent, www.washair.com and is midsized businesses. gate revenue $206 billion, and the small, companies on the list collectively gen- Companies such as Microsoft, Dell, erated 619,500 jobs over the past three Domino’s Pizza, Pandora, years. Complete results the Inc. Timberland, LinkedIn, Yelp, Zillow of many company and and other well-known names including 5000, profiles 1010 Conshohocken Road • Conshohocken, PA 19428 an interactive database that can be gained their first national exposure as 610-279-5777 sorted honorees by industry, region, and other of the Inc. 5000. 668 Berlin Cross Keys Road • Sicklerville, NJ 08081 criteria, can be found at (This story also can be found on 856-740-1400 Construction Equipment Guide’s www.norrissales.com inc.com/inc5000. “The Inc. 5000 is the most persua- website at www.constructionequipsive evidence I know that the mentguide.com.)

Visit CEG’s Web Site at www.ConstructionEquipmentGuide.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 65

Link-Belt® Spin Ace® ([FDYDWRUV DUH SDFNHG ZLWK DOO WKH SRZHU SURGXFWLYLW\ DQG IXHO HI¿FLHQF\ \RX¶YH FRPH WR H[SHFW IURP XV DORQJ ZLWK D PLQLPXP VZLQJ UDGLXV GHVLJQ IRU EHWWHU PDQHXYHUDELOLW\ DW VLWHV ZKHUH ZRUN VSDFH LV DW D SUHPLXP 7KRXJKWIXO UHGHVLJQ RI FRXQWHUZHLJKWV DQG ERRP SODFHPHQW PDNHV WKHP LGHDO IRU UHVLGHQWLDO FRQVWUXFWLRQ XWLOLW\ ZRUN DQG VSHFLDOW\ WUHQFKLQJ MREV 5RRP\ UHGHVLJQHG FDE +LJK GH¿QLWLRQ IXOO FRORU Ǝ /(' PRQLWRU &RQYHQLHQW JURXQG OHYHO VHUYLFH DQG ÀXLG FKHFNV Extended service intervals 7LHU $ FHUWL¿HG ,VX]X HQJLQHV \HDU VXEVFULSWLRQ WR 5HPRWH&$5(™ WHOHPDWLFV $OO WKLV ZLWK WKH LQGXVWU\¶V EHVW VWDQGDUG ZDUUDQW\

Model #

Operating Wt.

Net hp @ rpm

Tail Swing

; 6SLQ $FH

OEV

KS # USP

ƍ Ǝ

; 6SLQ $FH

OEV

KS # USP

ƍ Ǝ

; 6SLQ $FH

OEV

KS # USP

ƍ Ǝ

; 6SLQ $FH

OEV

KS # USP

ƍ Ǝ

<RXU /LQN %HOW ([FDYDWRU GHDOHU KDV WKH ULJKW 6SLQ $FH IRU \RXU DSSOLFDWLRQ DORQJ ZLWK XQFRPSURPLVLQJ VHUYLFH DQG VXSSRUW WR NHHS WKHP SHUIRUPLQJ DW WKHLU EHVW

*75 X3 and 80 X3 engines are Final Tier 4


Page 66 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Home of the Rotating Telehandler • Multiple attachments - One machine! • Jibs; aerial platforms, buckets, etc. • Hydrostatic drive for simplicity • Built-in sideshift for precision • Compact stabilizers for safety • Frame leveling for accuracy • Ring of steel for protection

Rental Units Available Rotates 360˚

(800) 479-3857

Current Specials Merlo ROTO 40.30 MCSS

ROMASTOR 360 FEATURED ITEM: Introducing ROMASTOR 360 Fork Attachment with 360 degree continuous rotation. Available for many brands of Telehandlers. CALL

2015, Approx. 1000 Hrs, 97’ Max Height, Clean, Like New Machine w/Warranty..Rent or Buy...Many to choose from. CALL NOW

USED Merlo ROTO 45.21 MCSS

Merlo 40.17 2017, Maximum Load Capacity: 8,800 lbs, Maximum Lift Height: 55’, Maximum Reach: 41’ CALL COMPACT MACHINE

Approx 1385 Hours, Excellent condition in and out 68' Max Height, 9,000 LBS max capacity, 360 Degree ROTATING machine .. CALL FOR LOWEST PRICE EVER OFFERED!

Largest Rental Fleet in the US Call for Details


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 67

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

1953 Caterpillar D4 Tractor, 1:16 scale, w/4S Bulldozer, Speccast - $190

Caterpillar 325L Excavator, 1:50 scale, NZG - $140

Caterpillar D8R Series II Track-Type Tractor, 1:50 scale, Diecast Masters - $85

Terex TLB 890 Backhoe/Loader, 1:50 scale, NZG - $125

Komatsu PC210-10 Excavator, 1:50 scale, Universal - $105

Kenworth T880 Red/White Dump Truck, 1:50 scale, First Gear - $100

Case 580ST Backhoe/Loader, 1:50 scale, Universal - $95

JCB 467 WLS Articulated Front End Loader, 1:50 scale, Motorart - $95

Caterpillar 308E2 CR SB Mini-Excavator, 1:32 scale, Diecast Master - $90

JCB 430 Articulated Backhoe/Loader, 1:35 scale, NZG - $75

Caterpillar 992G Wheel Loader, 1:50 scale, Norscot - $75

Liebherr R914 Excavator, 1:50 scale, Conrad - $75

Case 850B Angle Tilt Dozer 1:35 scale, NZG - $65

John Deere 624J Wheel Loader, 1:50 scale, Ertl - $45

Michigan L320 Wheel Loader, 1:50 scale, Joal - $45

Case 850C Angle Tilt Dozer, 1:35 scale, NZG - $65

Shipping and Handling Included

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.


Page 68 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Atlantic • Monmouth • Warren • Bergen • Salem • Sussex • Hunterdon • Camden • Ocean • Essex • Burlington • Morris • Cumberland • Cape New Jersey...• Ocean •Atlantic • Monmouth • Warren • Bergen • Salem • Sussex • Hunterdon • Camden • Ocean • Essex • Burlington • May • Middlesex Morris • Cumberland • Cape May • Middlesex • Ocean • Atlantic • Monmouth • Warren • Bergen • Salem • Sussex • Hunterdon • Camden • Ocean • Essex • Burlington • Morris • Cumberland • Cape May • Middlesex • Ocean • Atlantic • Monmouth • Warren • Bergen • Salem • Sussex • Hunterdon • Camden • Ocean • Essex • Burlington • Morris • Cumberland • Cape May • Middlesex •

“Garden State” Highway Projects

The New Jersey Department of Transportation received bids for transportation-related improvement projects. Following is a list of some of the projects let. County: Warren Contract No.: 17116 Location: Route 22 westbound over ramp to Route 22 eastbound. Project: Bridge deck replacement. Contractors and Bid Amounts: • Konkus Corporation — $2,398,799 • Rencor Inc. — $2,922,663 • Berto Construction Inc. — $3,191,508 • Carbro Constructors Corporation — $4,158,295 • Montana Construction Corporation Inc. — $4,169,053 Completion Date: May 25, 2018 County: Warren Contract No.: 17119 Location: Route I-78, Route 22 to Tunnel Road. Project: Pavement preservation. Contractors and Bid Amounts: • Intercounty Paving Associates LLC — $5,573,924 • Crisdel Group Inc. — $5,888,000 • Tilcon New York Inc. — $5,935,000 • Joseph Defino Trucking Company Inc. T/A Defino Contracting Company — $6,318,762 • Della Pello Paving Inc. — $6,875,634 Completion Date: Feb. 22, 2018 County: Hunterdon Contract No.: 17128 Location: Route I-78, Charlestown Road/Perryville Road (CR 635) to Route 287. Project: High performance thin overlay and pavement preservation. Contractors and Bid Amounts: • Crisdel Group Inc. — $22,780,464 • Della Pello Paving Inc. — $22,944,441 • Tilcon New York Inc. — $23,400,000 • Intercounty Paving Associates LLC — $23,673,223 • Joseph Defino Trucking Company Inc. T/A Defino Contracting Company — $26,227,107 • Schifano Construction Corporation — $26,582,804 Completion Date: Oct. 16, 2018 Counties: Bergen, Essex, Hudson, Morris, Passaic, Sussex, Union and Warren Contract No.: 17426 Location: North 2017 Contract. Project: Maintenance stormwater facilities restoration. Contractors and Bid Amounts: • Joseph M. Sanzari Inc. — $3,293,000 • IEW Construction Group Inc. — $3,390,500 • Mount Construction Company Inc. — $3,552,000

Completion Date: June 30, 2018 Counties: Bergen, Essex, Hudson, Morris, Passaic, Sussex, Union and Warren Contract No.: 17456 Location: North 2017 Contract. Project: Drainage restoration. Contractors and Bid Amounts: • National Water Main Cleaning Company — $2,096,798 • Mount Construction Company Inc. — $3,255,580 Completion Date: June 30, 2018 County: Burlington Contract No.: 17410 Location: South, Sub-Region S-1. Project: Maintenance roadway repair. Contractors And Bid Amounts: • Arawak Paving Company Inc. — $3,728,000 • Richard E. Pierson Construction Company Inc. — $4,053,614 • Trap Rock Industries LLC — $4,167,812 • Joseph Defino Trucking Company Inc. T/A Defino Contracting Company — $4,441,803 Completion Date: Dec. 15, 2017 County: Mercer Contract No.: 17109 Location: Route 130 Sharon Road to Meadowbrook Road.

Project: Resurfacing, Contractors and Bid Amounts: • Joseph Defino Trucking Company Inc. T/A Defino Contracting Company — $3,636,291 • Crisdel Group Inc. — $4,111,917 Completion Date: May 30, 2018 County: Passaic Contract No.: 17125 Location: Route 46 over Piaget Avenue (CR 628). Project: Superstructure replacement. Contractors and Bid Amounts: • Anselmi & Decicco Inc. — $5,140,000 • IEW Construction Group Inc. — $5,572,401 • Railroad Construction Company Inc. — $5,648,877 • J.F. Creamer & Son Joint Venture with Joseph M. Sanzari Inc. — $6,239,340 • Beaver Concrete Construction Company Inc. — $6,397,785 Completion Date: Oct. 7, 2018 County: Gloucester Contract No.: 17129 Location: Route 47 Atlantic Avenue to Shunpike Road. Project: Rehabilitation and intersection improvements. Contractors and Bid Amounts: • South State Inc. — $1,784,709 • A.E. Stone Inc. — $1,940,000 • Joseph Defino Trucking Company Inc. T/A Defino Contracting Company — $2,517,283 Completion Date: May 25, 2018


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 69


Page 70 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE



Page 72 • October 4, 2017 • www.constructionequipmentguide.com • Off-Road Truck Section • Construction Equipment Guide

Volvo A60H Artic Truck Makes Its North American Debut In 1966, Volvo introduced the industry’s first articulated hauler — the 10-ton (9 t) DR 631, known as Gravel Charlie. Fifty years and 50 tons later, the A60H marks another Volvo milestone. Built upon the same engineering advancements as its smaller, industry-leading counterparts, the A60H provides the same offroad capability, now with an impressive 60-ton (54 t) payload capacity. This new-to-industry hauler class opens increased production opportunities and cost savings potential not previously possible with smaller articulated haulers or rigid trucks in the 60-ton size class, according to the manufacturer. “The A60H is a perfect fit for contractors who typically run multiple articulated haulers on long-term earthmoving projects. In many cases, customers could expect reduced operating costs by replacing two smaller trucks with one A60H,” said Eric Fatyol, product manager, GPE products at Volvo Construction Equipment. “The A60H could also open up new areas of production for mine and aggregate sites by providing access to areas of the site that were previously inaccessible with rigid trucks. Similarly, the A60H could extend the production season in harsh-weather regions and also eliminate the need for hiring outside contractors to handle overburden work.” True Volvo Versatility Powered by a 673-hp Volvo D16J engine and built upon the Volvo platform, the A60H goes where others can’t. The active hydraulic front suspension, hydro-mechanical steering and high ground clearance at the articulation joint enable the A60H to easily and comfortably navigate severe terrain, and the rotating hitch design makes the articulation joint virtually maintenance-free. Automatic traction control (ATC) and 100-percent differential locks continue to be a competitive advantage for Volvo. The no-slip, no-wear differential locks work in 4x6 and 6x6 drive combinations. This industry-unique design employs the front two axles in full-time, and the back axle kicks in as necessary — allowing unmatched off-road performance while reducing fuel consumption and tire wear. With oil-cooled, wet, multiple disc brakes on all three axles, stopping distance is impressively short — even on steep, muddy gradients, according to the manufacturer.

Volvo Construction Equipment once again reinvents the category of articulated haulers with the A60H — a first-of-its-kind, 60-ton-capacity, fully articulated hauler that invites customers to rethink the way they’re moving material.

New Features Come Standard The Volvo A60H also offers a range of new standard features borrowed from the latest Gseries model updates, each contributing to improved safety, productivity, efficiency and ease of serviceability. Hill Assist is a new safety and convenience

feature that holds the hauler in place on steep slopes without the need to engage the parking brake. The feature automatically activates when arriving at a complete stop on a hill and is disengaged when the operator accelerates. Dump Support System allows the operator to see the percentage side inclination of the truck and set allowable parameters for safe operation. This new feature adds to the already user-friendly dumping process aided by Volvo’s load and dump brake technology with automatic hold and float tipping lever, which provides precise control for faster cycle times. On-Board Weighing now comes standard and is fully automatic. Three load indicator lights alert both the hauler operator and the excavator operator when nominal load has been reached and can warn the operators of overloading. The hauler operator also can see, in real-time, the actual tonnage displayed on the in-cab Contronics display, which also includes a new Econometer feature showing fuel economy in the form of gallon per transported ton, per work cycle for the last 10 cycles. This data is also shared and remotely accessible by the fleet manager through CareTrack, Volvo’s telematics system, allowing for complete payload management and improved fleet utilization. Serviceability improvements include a redesigned belly plate that can be electrically lowered and raised with the same hydraulic lever that is used for the engine hood, which opens to a full 90 degrees for easy, unrestricted access. Another improvement to the A60H is the no-grease tipping cylinders, which are maintenance-free, allowing for greater uptime and productivity. New orange accent colors on handrails, grill step and cab entrance now provide contrast for additional safety. Protected for a Lifetime The A60H is not just powerful and off-road capable — it’s incredibly durable, which is why it’s backed by a Lifetime Frame and Structure Warranty. The A60H’s frame and articulation/oscillation joint are protected for the entirety of the initial period of ownership or for the life of the machine — whichever is less. Further support for the A60H is offered from Volvo’s extensive dealer network, who can develop customized customer support agreements with everything from maintenance plans and machine monitoring reporting via CareTrack and MATRIS, to uptime guarantees and full machine warranty options. For more information, call 717/532-9181 or visit www.volvo.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)


Construction Equipment Guide • Off-Road Truck Section • www.constructionequipmentguide.com • October 4, 2017 • Page 73

IN YOUR WORLD,

EVERY MACHINEE MUST CARRY ITS WEIGHT. Owners and operators like you told us whaat you need to lighten your load, so our lineup of E-Series Articu ulated Dump Trucks (ADTs) does the heavy lifting for you. y The redesigned E-Series delivers payloads p up to 41 819 kg (9 92,195 lb.). Heaped capacitiees up to 25.5 m3 (33.4 cu. yd.).* An nd fast cycle times. Boost productivity and uptime. Redduce daily operating costs. And Run You Your o World. Call or visit us to oday. *At 2-to-1 ISO 6483 ratio o.

CONNECTICUT

MAINE

NEW JERSEY

NEW YORK

NEW YORK

The W.I. Clark Company

Nortrax

JESCO, Inc.

Five Star Equipment, Inc.

Nortrax

Wallingford, CT 06492 203/265-6781 Danbury, CT 06810 203/775-1203 Plainfield, CT 06374 860/546-4808 www.wiclark.com

Hermon, ME 207-947-6786

118 St. Nicholas Ave. South Plainfield, NJ 07080 908/753-8080 800/241-7070

Rochester, NY 14624 585/235-3011

Clifton Park, NY 518-371-5111

Kirkwood, NY 13795 607/775-2006

Gouverneur, NY 315-287-0703

1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080

Orchard Park, NY 14127 716/662-2191

Houlton, ME 207-532-6517 New Canada, ME 207-834-6701 Westbrook, ME 207-773-3777

DELAWARE JESCO, Inc.

MASSACHUSETTS

Middletown, DE 302/376-0784

Schmidt Equipment, Inc.

MARYLAND JESCO, Inc. Baltimore, MD 410/687-1700 Delmar, MD 410/546-1090 Frederick, MD 301/874-5500 White Plains, MD 301/870-1438

North Oxford, MA 01537 508/987-8786 North Billerica, MA 01862 978/667-4345 Plymouth, MA 02360 508/830-9997 No. Swansea, MA 02777 508/379-9810 Springfield, MA 01104 413/543-5595 www.schmidtequipment.com

1790 Route 38 Lumberton, NJ 08048 609/267-2020 888/217-0600 www.jesco.us

6500 E Taft Road Syracuse, NY 13057 315/452-4560

JESCO, Inc. 497 Fishkill Avenue Beacon, NY 12508 845/831-1800 800/724-0725 110 East Jefryn Blvd. Deer Park, NY 11729 844-482-0910

NEW HAMPSHIRE Nortrax Pembroke, NH 603-225-2769

PENNSYLVANIA Five Star Equipment, Inc. 711 Route 199 Athens, PA 18810 570/882-8800 1300 East Dunham Drive Dunmore, PA 18512 570/346-1701 46 Route 97 Waterford, PA 16441 814/796-2663

VERMONT

2585 Lycoming Creek Road Williamsport, PA 17701 570/494-4030

Nortrax

www.fivestarequipment.com

Springfield, VT 802-885-6840 Williston, VT 802-658-2121 www.nortrax.com

Plasterer Equipment Co., Inc. 2550 E. Cumberland St. Lebanon, PA 717/273-2616 800/225-4001 3215 State Rd. Sellersville, PA 215/258-5700 800/523-2209 400 Stoke Park Rd. Bethlehem, PA 610/867-4657 800/587-9790 640 Lowther Rd. Lewisberry, PA 717/938-6568 866/787-0001 www.plasterer.com


Page 74 • October 4, 2017 • www.constructionequipmentguide.com • Off-Road Truck Section • Construction Equipment Guide

Contact your local dealer: Chadwick-BaRoss Westbrook, ME 207.854.8411

Penn-Jersey Deptford, NJ 856.227.6400

Bangor, ME Middlesex, NJ Contact your local dealer:732.377.4130 207.942.4838 Caribou, ME Dealer Name 207.498.2547

Lionville, PA Dealer Name 610.363.9200

Concord, NH City, ST 603.224.4063

Staten Island, NY City, ST 718-448-2444

Highway Equipment & City, ST Supply Co. 123.456.7890 Harrisburg, PA 717.564.3031

Rudd City, ST PA Pittsburgh, 123.456.7890 412.741.1731

123.456.7890

City, ST

Drums, PA 123.456.7890 570.788.1127 Ephrata, PA City, ST 717.859.3132

123.456.7890

Lock Haven, PA 570.769.1070 Dealer Name

Malvese Hicksville, City, ST NY 516.681.7600 123.456.7890 Riverhead, NY City, ST 631.369.1147 123.456.7890

McClung Logan Equipment City, ST Company, Inc.123.456.7890 Baltimore, MD 410.242.6500 City, ST Manassas, VA 123.456.7890 703.393.7344 Winchester, VA Dealer Name 540.722.3700 Chesapeake, VA City, ST 757.485.3314 123.456.7890 Richmond, VA City, ST 804.266.0000 123.456.7890 Roanoke, VA

540.989.3750 City, ST

Wise, VA 123.456.7890 276.328.8027 Bridgeville, City, ST DE 302-337-3400 123.456.7890

123.456.7890

Clearfield, PA City, ST 814.765.8500

123.456.7890

Louisville, KY 502.456.4050 City, ST

Charleston, WV 123.456.7890 304.755.7788 Dealer Name Tyler Equipment East Longmeadow, MA 413.525.6351 City, ST 123.456.7890 Berlin, CT 860.356.0840 City, ST

Vantage Equipment 123.456.7890 Latham, NY 518.220.9500 City, ST 123.456.7890 Batavia, NY 585.344.1931 City, ST

Syracuse, NY 123.456.7890 315.437.2611 Woodco Machinery Dealer Name Woburn, MA 781.935.3377 City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890

Some c companies ha h ve you ch hoose power o or fuel efficiiency. Yo ou c chose both.

City, ST 123.456.7890

Volvo olv developed the ind dustry’s first fuel efficiency guar guarantee so you never haavve to compromise on performance or prod ductivity. And with CareT Trrac ck machine monitoring, you can focus f your attention on more impo ortant things — like growing your business. T Talk alk to us today oday, or get the details at volvoce.com/smar m/smartfuel.

Construction Equipment Guide • Off-Road Truck Section • www.constructionequipmentguide.com • October 4, 2017 • Page 75


Page 76 • October 4, 2017 • www.constructionequipmentguide.com • Off-Road Truck Section • Construction Equipment Guide

see CHART page 84

Articulated (A)/ Rigid (R)

Mfg. Model

Drive Configuration

BELL

CATERPILLAR 770G 770G Tier IV 772G 772G Tier IV 773G 775G 777G 785D 789D 793F 795F AC 797F

R R R R R R R R R R R R

HITACHI EH3500AC-3 EH4000AC-3 EH5000AC-3

A A A A A

TEREX TRUCKS TA400 TA250 TA300 TR100 TR45 TR60 TR70

VOLVO A25G A30G A35G A40G A45G A45G FS A60H

2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD

RWD RWD RWD

R R R

JOHN DEERE 260E 310E 370E 410E 460E

76,044 (34,493) 96,253 (43,660) 106,130 (48,140) 140,829 (63,879) 156,059 (70,787) 160,666 (72,877) 177,911 (80,699) 214,898 (97,476)

6x6 6x6 6x6 6x6 6x6 6x6 6x6 4X4

A A A A A A A A

B20E B25E B30E B35E B40E B45E B50E B60E

Operating Weight Pounds (kgs)

Articulated Articulated Articulated Rigid Rigid Rigid Rigid A A A A A A A

6x6 6x6 6x6 6x6 6x6

6x6 6x6 6x6 4x2 4x2 4x2 4x2 6x4 and 6x6 6x4 and 6x6 6x4 and 6x6 6x4 and 6x6 6x4 and 6x6 6x4 and 6x6 6x4 and 6x6

157,000 (71,214) 157,000 (71,214) 181,000 (82,100) 181,000 (82,100) 226,500 (102,739) 246,500 (111,811) 363,000 (164,654) 550,000 (249,476) 700,000 (317,515) 851,000 (386,007) 1,257,000 (570,166) 1,375,000 (623,690)

709,888 (322,000) 846,575 (384,000) 1,102,310 (500,000)

49,591 (22 494) 50,369 (22 847) 67,863 (30,782) 70,224 (31,853) 71,028 (32,218)

152,978 (69,390) 106,393 (48,259) 115,081 (52,200) 347,710 (157,720) 171,870 (77,960) 210,940 (95,680) 248,440 (112,690) 104,499 (47,400) 115,302 (52,300) 139,883 (63,450) 151,898 (68,900) 156,749(71,000) 157,630 (71,500) 217,700 (98,750)

19.9 (18.0) 26.45 (24.0) 30.86 (28.0) 37.0 (33.5) 43.0 (39.0) 45.2 (41.0) 50.0 (45.4) 60.62 (55.0)

TF4 Mercedes Benz OM 934LA TF4 Mercedes Benz OM 936LA TF4 Mercedes Benz OM 936LA T4F LA 471 OM z Ben des Merce T4F Mercedes Benz OM471LA T4F Mercedes Benz OM471LA T4F Mercedes Benz OM473LA T4F Mercedes Benz OM473LA

Cat C15 ACERT Cat C15 ACERT Cat C18 ACERT Cat C18 ACERT Cat C27 ACERT Cat C27 ACERT Cat C32 ACERT Cat 3512C HD Cat 3516C HD Cat C175-16 Cat C175-16 Cat C175-20

40 (36.3) 42.1 (38.2) 51.6 (46.8) 51.6 (46.8) 61.0 (55.3) 70.5 (64.0) 105.9 (95.0) 136 (123.4) 181 (164.2) 227 (205.9) 318 (288.5) 363 (329.3)

M M M M M M M M

Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto AC Elec Auto

Cummins QSKTA50-CE Cummins QSKTA60-CE Cummins QSKTTA60-CE

200 (181) 243.6 (221) 326 (296)

26.7 (24.2) 31.0 (28.1) 37.1 (33.6) 41.1 (37.3) 46.1 (41.8)

Drive System Mech/Electr.

Engine Type

Rated Payload Tons (Metric Tons)

6090 FT4 engine John Deere PowerTech PSS 6090 FT4 engine PSS ech erT Pow ere De n Joh 5 FT4 engine John Deere PowerTech 6135 FT4 engine 613 ech erT Pow John Deere 5 FT4 engine John Deere PowerTech 613

41.9 (38) 27.5 (25) 30.9 (28) 100 (91) 45 (41) 60 (55) 72 (65) 27.6 (25) 33 (29) 38 (34.5) 43 (39.0) 45.2 (41) 45 (41) 60.6 (55)

NEQUIPMENTGUIDE.COM VISIT WWW.CONSTRUCTIO TRUCK LISTINGS. FOR COMPLETE OFF ROAD

Scania DC13 Scania DC9 Scania DC9 MTU 16V-2000TA Cummins QSK19-C525 Cummins QSK19-C700 MTU 12V-2000TA Volvo D11L Volvo D11L Volvo D13J Volvo D13J Volvo D16J Volvo D16J Volvo D16J

E E E

M M M M M

M M M M M M M M M M M M M M


Construction Equipment Guide • Off-Road Truck Section • www.constructionequipmentguide.com • October 4, 2017 • Page 77

Harter Equipment, Inc.

A. Montano Co. Inc.

Tracey Road Equipment

Highway Equipment Company

615 State Route 33 Millstone Twp., NJ 08535 732-446-7600 www.harterequipment.com

571 Route 212 Saugerties, NY 12477 845-247-0206 www.amontanoco.com

6803 Manlius Center Road • East Syracuse, NY 13057 315-437-1471 • 800-872-2390 Kirkwood, NY Henrietta, NY 607-775-5010 • 800-370-9488 585-334-5120 • 866-950-6210 Adams Center, NY Albany, NY 315-788-0200 • 888-335-0200 518-438-1100 • 866-740-8853

22035 Perry Highway • Zelienople (Pittsburgh), PA 16063 724-452-7800 McKean (Erie Area), PA 1405 Timken Place SW Canton, OH 44706 814-476-7755 330-915-8391 Dubois, PA 814-371-3600

www.traceyroad.com

www.highway-equipment.com


Page 78 • October 4, 2017 • www.constructionequipmentguide.com • Off-Road Truck Section • Construction Equipment Guide

Komatsu Introduces HD325-8, HD405-8 Rigid Frame Trucks Komatsu America Corp.’s HD325-8 and HD405-8 off-highway trucks are equipped with an EPA Tier IV Final certified engine and feature increased horsepower and a new Komatsu Traction Control System (KTCS) to achieve improved productivity. These models have payload capacities of 40.3 tons (36.5 t) and 44.1 tons (40 t), respectively. They replace the HD325-7 and HD405-7 models. The new trucks’ Komatsu SAA6D140E-7 engines have increased to a net 514 hp (383 kW). Fuel consumption is down for the HD325-8 by as much as 9 percent, and by as much as 6 percent for the HD405-8, compared to predecessors. Also, access is better, with sloped stairs and handrails in front, to replace the previous ladder configuration. For HD325-8 and HD405-8 machines, Komatsu traction control system (KTCS) is now standard. KTCS automatically applies independent brake assemblies to achieve optimum traction in varying ground conditions. Because the system operates without the need for differential lock-up, steering performance is not compromised, according to the manufacturer. Other new standard features for both truck models include a quiet 78 dB(A) cab, 7-inch, LCD color monitor, dedicated rearview monitor, fast-fill fuel system and a premium heated and ventilated operator’s seat with air suspension. In addition, the tire size for the HD405-8 truck has been increased from 18.00 R33 to 21.00 R33, for extended wear properties. “The updated truck models retained their industry leading steering performance and retarding capacity for maximum production,” said Rob McMahon, product marketing manager of Komatsu America. “The addition of Komatsu’s latest fuel saving technologies and the all-new cab, lower the cost to maximize production and significantly enhance operator comfort at the same time.” Tier IV Final Certified Engine Technology • The powerful SAA6D140E-7 engine provides a gross power rating of 518 hp (386 kW). • The hydraulically actuated exhaust gas recirculation (EGR) and variable geometry turbocharger (VGT) ensure precise operation and quick engine response. • Maintenance of Tier IV Final engines is simplified with enhanced monitor panel capability and service features. • KOMTRAX and the monitor panel provide critical information for easy monitoring and key data for production management. • Komatsu diesel particulate filter (KDPF) and selective catalytic reduction (SCR) are

designed in conjunction with the engine for efficiency and long life. • More than 98 percent of KDPF regeneration is performed passively, with no action required of the operator and no interference with machine operation. • Power and economy modes allow the operator to optimize the performance required for operation. New In-Cab Enhancements/Features • Air-suspension, high-back, ventilated and heated seat softens machine vibrations for added operator comfort and cast frame members increase strength. • Seven-inch, full color, high resolution monitor delivers a sharp picture and vivid colors, even in harsh light. • Komatsu auto idle shutdown can reduce idle time and save fuel. • Separate, full color, rearview monitor with improved line-of-sight. • Pioneering KOMTRAX telematics system and monitor provide key machine met-

rics, including KDPF status and fuel consumption. Performance information can be collected and sorted by operator ID. • Auxiliary jack and two 12 volt ports. Additional Features/Benefits • New angled front access stairs with handrails are now standard for both sides of the machine. • Tight turning radius with MacPherson strut front suspension. • Hydropneumatic suspension system for a smooth ride. • New Komatsu traction control system (KTCS) automatically provides optimum traction in all ground conditions without operator input. • Komatsu advanced transmission with optimum modulation control system (KATOMiCS) adjusts shifting performance according to demand for a more comfortable ride and reduced material spillage. • Automatic retard speed control (ARSC) automatically maintains a selected downhill travel speed (rather than engine RPM) that is

appropriate for the grade. • Enhanced Komatsu integrated payload meter (PLM) data is available on the machine monitor and remotely via the web. • New ground level accessible battery box for easy maintenance. Komatsu CARE The HD325-8 and HD405-8 are covered by the Komatsu CARE program for the first three years or 2,000 hours, whichever comes first. Komatsu CARE for these models includes complementary scheduled engine maintenance and two complementary Komatsu diesel particulate filter exchanges in the first five years. Komatsu CARE lowers ownership costs, raises resale value and improves equipment uptime and availability. For full program details, refer to the Komatsu CARE reimbursement letter. For more information, visit www.komatsuamerica.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Komatsu America Corp.’s HD325-8 and HD405-8 off-highway trucks have payload capacities of 40.3 tons (36.5 t) and 44.1 tons (40 t), respectively, and replace the HD325-7 and HD405-7 models.


Construction Equipment Guide • Off-Road Truck Section • www.constructionequipmentguide.com • October 4, 2017 • Page 79

MIDLANTIC MACHINERY

EDWARD EHRBAR

www.ehrbar.com www.midlanticmachinery.com 2240 Bethlehem Pike Hatfield, PA 19440 215/822-0145 Harrisburg, PA 717/652-3190 State College, PA 814/308-5660 Baltimore, MD 410/247-2100 Wilkes-Barre, PA 570/824-9891 Frackville, PA 570/874-6140 Laurel, DE 302/715-5382

4 Executive Plaza Yonkers, NY 10701 914/738-5100 Holbrook, NY 631/563-7600 New York City, NY 718/626-3331 42 Kenosia Ave. Danbury, CT 203/743-0088

C.N. WOOD CO, INC.

www.cn-wood.com

ANDERSON EQUIPMENT CO.

www.andersonequip.com PENNSYLVANIA Pittsburgh, PA 412/343-2300 Clarion, PA 814/226-4100 Clearfield, PA 814/765-5311 Somerset, PA 814/443-2867 NEW YORK Buffalo, NY 716/877-1992 Henrietta, NY 585/334-6770 Syracuse, NY 315/463-8673 Albany, NY 518/785-4500 Watertown, NY 315/788-5512 Endicott, NY 607/748-3400 Olean, NY 716/372-8822 NEW HAMPSHIRE Lancaster, NH 603/788-6595 Manchester, NH 603/627-7696 MAINE Bangor, ME 207/942-0177 Gorham, ME 207/591-5482 VERMONT East Montpelier, VT 802/223-9689

Avon, MA 508/584-8484 Woburn, MA 781/935-1919 Whately, MA 413/665-7009 Johnston, RI 401/942-9191

PINE BUSH EQUIPMENT, CO. INC.

www.pbeinc.com Route 302, P.O. Box 106 Pine Bush, NY 12566 845/744-2006 Holmes, NY 12531 845/878-4004

EAST PBE, INC.

www.pbeinc.com 283 Pane Road Newington, CT 06111 860/665-7470 Fax: 860/665-7478

KOMATSU NORTHEAST

www.komatsune.com 2820 Hamilton Blvd. South Plainfield, NJ 07080 908/561-9000 201 North Route 73. Winslow Township, NJ 08095 856/767-5900


Page 80 • October 4, 2017 • www.constructionequipmentguide.com • Off-Road Truck Section • Construction Equipment Guide

Cat 745 Artic Truck Offers Next Generation Cab Design Offering a 45.2-ton (41 t) rated payload capacity, the Cat 745 articulated truck features a new cab design, completely re-engineered from the inside-out using global operator feedback to advance comfort and ease of operation. The new external “spinal” ROPS structure boasts bonded rear quarter glass that eliminates the structural pillar to give the operator a dramatic improvement in visibility from the cab. Upon cab entry, the new “wake up” feature initiates machine displays as soon as the door is opened, while the lighter/stronger cab door offers shut assist for improved sealing against dust infiltration. The quieter cab design lowers inside sound levels by 5 dB at the operator’s ear. New infrared glass reduces solar heating inside the cab, while left- and right-hand sliding windows increase ventilation and improve external communication with workers and the loading vehicle. More vents positioned above and behind the operator enables the new automatic climate control (HVAC) system to more efficiently heat and cool the cab. Offering the ability to accommodate a wider range of operators, the new heated/cooled seat provides more setting adjustments to dial in personalized operator comfort, while a new flip up/down passenger seat offers added comfort cushioning. A ground-level switch controls new access lights illuminating the steps and hitch area for improved safety when entering the cab. New cab-mounted mirrors and integrated payload lights offer improved visibility around the truck as well as payload levels for the loader operator. Innovative Machine Controls Inside the cab, a new combined transmission and hoist lever gives operators efficient single-lever control over truck speed and body hoisting functions to minimize operator effort and automate repetitive operations. At the flick of a switch, operators can choose between manual or fully automatic assisted hoisting control, which automatically applies the waiting brake, sets the transmission in neutral and hoists the body to maximum angle at high rpm. A new push-button lever control allows the operator to easily set the machine speed and select transmission hold/waiting brake. Directional gear shifting protection on the new 745 articulated truck now protects the powertrain by bringing the machine safely to a stop when transitioning from forward to reverse and vise-versa. Further improving operator safety, the machine incorporates the new Cat Detect with Stability Assist system. This system audibly and visibly warns the operator if tractor or trailer unit has reached an angle

Offering a 45.2-ton (41 t) rated payload capacity, the Cat 745 articulated truck features a new cab design, completely re-engineered from the inside-out using global operator feedback to advance comfort and ease of operation.

threshold where it is in risk of tipping over. The class leading fully advanced automatic traction control is improved by technology that will proactively apply the differential locks prior to any wheel spin. Terrain-based throttle smoothing prevents the new truck from surging when an operator is traveling over extremely rough terrain and is unable to keep steady pressure on the accelerator pedal, according to the manufacturer. The new 745 truck’s touchscreen display with revised menus offer intuitive navigation through the screens for simple machine control. The display enables the operator to monitor machine functions and personalize a variety of options. A new emergency stop brake switch next to the display offers a further level of operating safety in the unlikely event of incurring issues with both the main and secondary brake circuits. Builds on Solid C Series Design The new Cat 745 articulated truck incor-

porates all the field-proven features and performance of the C Series that deliver fast cycle times, high productivity and fuel efficiency. Its powertrain is driven by the Cat C18 ACERT engine, rated at 504 net hp (375 kW), which meets U.S. EPA Tier IV Final/EU Stage IV emissions standards. A new economy mode feature results in an average of 5 percent fuel consumption improvement in applications where a truck is not required to operate at full productivity. Cat’s CX38B high density power shift transmission enhances the new truck’s overall performance and productivity, while permanent six-wheel drive enables the truck to navigate even the most challenging terrain. Automatic retarding control manages machine retarding through a combination of engine, brake, gear selection and service brake application without operator intervention. Hill assist facilitates efficient stopping and starting on grades, while the waiting brake system, quickly engaged by a push-

button on the control lever, temporarily applies the service brake during pauses in the work cycle. In direct response to customer feedback, the lower portion of the front fenders is now made of a durable and flexible rubber sheet material. This change will help decrease maintenance and repair costs on sites where mud packing around the fenders could damage the lower section. Cat Connect PAYLOAD technology for the new 745 truck allows customers to optimize operations and improve overall jobsite efficiency. The available Cat Production Measurement system gives operators the ability to measure and deliver accurate payload with the confidence to boost productivity, lower costs and reduce the risk of overload damage. For more information, visit www.cat.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)


Construction Equipment Guide • Off-Road Truck Section • www.constructionequipmentguide.com • October 4, 2017 • Page 81


Page 82 • October 4, 2017 • www.constructionequipmentguide.com • Off-Road Truck Section • Construction Equipment Guide

Articulated Dump Trucks: Heavy Hauling Made Easy By Aaron Kleingartner SPECIAL TO CEG

One of the most common mistakes made when selecting an off-highway haul truck is assuming that rigid and articulated dump trucks (ADTs) are alike. Although they both have massive hauling capabilities, the fact is each truck type has specific features that are valuable in certain applications. This article lays out the benefits of operating ADTs for moving materials in construction applications. An ADT’s design offers several off-road performance advantages when working in earthmoving and hauling applications. Since their simple, yet effective design can be very

• Semi-independent front suspension • Limited-slip differentials • Inter-axle differential ADTs can increase productivity and uptime because they are designed to operate in conditions that can limit other earthmoving equipment productivity. For example, some ADTs have front and rear limited-slip differentials, and an inter-axle differential to improve truck performance by splitting power one-third to the front and two-thirds to the rear. A front-mounted turning ring and rear tandem bogie are two ADT features — a design feature for some brands — that maintain maximum traction and stability when traveling over very rough or soft terrain.

A common mistake is assuming that rigid and articulated dump trucks (ADTs) are alike. Although they both have massive hauling capabilities, the fact is each truck type has specific features that are valuable in certain applications.

different from other pieces of hauling equipment, it is important that the trucks are compatible with specific tasks. Owners should first identify the tasks the ADT needs to perform. If the tasks are routine and regular, owners will likely purchase an ADT; however, if the tasks are performed only periodically, it may be best to rent the machine on an asneeded basis. Pairing an ADT with the properly sized loading equipment, assessing how easy the machine is to service, selecting the proper tire for the application, understanding the options and accessories available and what multiple safety features are available should also be considered. By considering these six tips, owners can better select an ADT that excels at hauling tasks: 1. Complete tasks more efficiently ADTs are designed to quickly move large amounts of material — such as dirt, rock, sand and gravel — with the lowest cost per ton transported in mind. Compared to rigid dump trucks or other earthmoving equipment, such as scrapers or pans, ADTs perform well in soft ground conditions and are commonly found on job sites in the early phases of site development, typically when ground conditions are not ideal. ADTs are efficient, increase productivity, and reduce downtime and daily operating costs because of the following features: • Articulation joint

2. Match with loading equipment The primary goal of any ADT owner is to maximize productivity by reducing haul cycles. One of the best ways to achieve these results in earthmoving applications is to match an ADT with the proper loading equipment, so equipment operators do not have to wait long between loads. For example, owners who complete short hauls on a job site and own a midsize crawler excavator should consider purchasing a 30-ton ADT. If they need to move larger volumes over long distances, a larger excavator paired with a 40-ton ADT would likely fit their requirements. For most material hauling sites with good production, it typically takes four to six passes, on average, to fill an ADT. 3. Minimize downtime by planning ahead for maintenance The last thing equipment owners want to do is waste valuable time servicing their machines. So before selecting an ADT, make sure it has good serviceability — easy access to the engine compartment on all sides and the transmission. Like any piece of construction equipment, proper and timely scheduled maintenance will extend the life of the machine and save the owner money over time. To better predict expenses, owners should consider creating a planned maintenance (PM) contract. With a PM contract, servicing time is typically based on the manufacturers’ optimal service schedule requirements. In addition, a PM contract ensures

that any necessary maintenance will be performed as required to help minimize any machine issues that can be caused because of a lack regular maintenance. In addition to a PM contract, ADT owners should perform three other preventive maintenance procedures: • Inspect the auto-lubrication system, if installed, to ensure that there is no premature component failure due to lack of grease • Assess tire air pressure, wear and damage on a regular basis • Monitor engine temperature and rpm history to prevent engine damage and major premature repairs with telematics Educated and dependable product support is critical for all heavy equipment. Make sure to choose a dealer that has product specialization and trained mechanics, offers great response times and has good parts in stock. 4. Select the proper tire When working in earthmoving applications, it is important to choose tires carefully to minimize costs. The right tires contribute significantly to an ADT’s tractive force, which is determined by the tread design, remaining tread life and tire inflation, along with ground conditions at the job site. The most common tires for ADTs are radial E3 or E4 tires; however, E3 tires offer better traction for sites that have soft soil conditions. Individual tire manufacturers can inform ADT owners and operators about which rubber compounds will provide longer life in earthmoving and hauling applications. 5. Expand versatility with multiple options and accessories ADTs operated in earthmoving and bulk hauling applications may be equipped with options and accessories to help increase their potential. Tailgates, for example, help to minimize spillage from the truck’s dump body and improve productivity. In addition, a heated body kit also is important, especially in colder climates, because it helps divert the engine exhaust through the channels in the dump body, keeping materials from freezing. Cold-weather starting kits and heated rear mirrors are other useful options for ADT operators working in the northern United States and in Canada. 6. Consider safety features When selecting an ADT, owners should understand the machine’s safety features. The location of the turning ring, or oscillating joint, of one ADT manufacturer helps keep equal weight on the front tires when loaded and turning. Unequal weight distribution can lead to instability. In addition, some ADT manufacturers have addressed compromised sight lines with rear sloping frames to help lower the center of gravity for more equal weight distribution, and improved stability when fully loaded. The frames also improve tractive effort, minimize tire wear and lower ground-bearing pressure. Large, well-placed and properly adjusted rearview mirrors help give a continuous view of the rear wheels when backing up and provide a higher degree of safety while on the jobsite. By looking at the ADT’s overall performance, versatility, serviceability and safety features, owners in earthmoving and hauling applications can make an educated decision about whether an ADT will fit into their fleets. For more information, visit www.DoosanEquipment.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)


Construction Equipment Guide • Off-Road Truck Section • www.constructionequipmentguide.com • October 4, 2017 • Page 83

Put financial tools as powerful as your equipment

to work for you. Volvo Financial Services offers a variety of options to keep your business growing.

2.2% 0% *

*

24 months on pre-owned Volvo remarketing machines.

24 months

on select Volvo D-Series excavators and G-Series wheel loaders.

Contact your local dealer to take advantage of the above offers, and ask about our fall rental conversion finance offers today. Visit volvoce.com/FinancePromotions for more information. *Rates not applicable to lease programs. Final approved transaction terms are subject to standard VFS credit underwriting guidelines and advance policy. VFS reserves the right to amend or cancel the program at any time without notice. Approvals will state the program terms and any other conditions deemed appropriate by VFS. Programs above are available on select machines. Contact your dealer for details. Programs expire December 31, 2017.


Page 84 • October 4, 2017 • www.constructionequipmentguide.com • Off-Road Truck Section • Construction Equipment Guide

76 CHART from page

Mfg. Model

Articulated/ Rigid

DOOSAN DA30-5 DA40-5

Drive Configuration 6x6 6x6

A A

HYDREMA TRUCKS A A A A A A

912ES 912HM 912HM Water Tanker 912HM Flatbed 922HM 912ES Rail

KOMATSU A HM300-5 HM400-5 HD325-8 HD405-8 HD465-8 HD605-8 HD785-7 HD1500-7 730E-8 830E-1AC 860E-1K 930E-4 930E-4SE 960E-2 960E-2K 980E-4

A R R R R R R R R R R R R R R

4x4 4x4 4x4 4x4 6x6 4x4 6WD 6WD RWD RWD RWD RWD RWD RWD RWD RWD RWD RWD RWD RWD RWD RWD

Operating Weight Pounds (kgs) 113,318 (51,400) 158,292 (71,800) 17,637 (8,000) 19,224 (8,720) 18,210 (8,260) 18,000 (8,165) 35,540 (16,120) 22,050 (9,979) 117,881 (53,470) 165,644 (75,135) 155,954 (70,739) 170,510 (77,341) 228,178 (103,500) 252,870 (114,700) 361,073 (163,780) 550,000 (249,478) 724,000 (328,401) 850,650 (385,848) 1,001,700 ( 454,363) 1,106,670 (501,974) 1,115,000 (505,755) 1,270,000 (576,072) 1,270,000 (576,072) 1,378,500 (625,277)

Rated Payload Tons (Metric Tons) 31 (28) 44 (40) 11 (10) 11 (10) 11 (10) 11 (10) 22 (20) 11 (10) 30.9 (28) 44.1 (40) 40.3 (36.5) 44.1 (40) 61 (55) 69.4 (63) 100.3 (91.0) 158.9 (144.1) 200 (181) 244 (222) 280 (254) 320 (290) 320 (290) 360 (327) 360 (327) 407 (369)

Drive System Mech/Electr.

Engine Type

M M

Scania DC9 Scania DC13

IVi Turbo Diesel M Cummins QSB 4.5 EPA Tier IVi Turbo Diesel M Tier Cummins QSB 4.5 EPA IVi Turbo Diesel M Cummins QSB 4.5 EPA Tier IVi Turbo Diesel M Tier EPA 4.5 B QS Cummins IVi Turbo Diesel M Cummins QSB, 6.7 EPA TierIVi Turbo Diesel M Tier EPA Cummins QSB 4.5 Komatsu SAA6D125E-7 Komatsu SAA6D140E-7 Komatsu SAA6D140E-7 Komatsu SAA6D140E-7 Komatsu SAA6D170E-7 Komatsu SAA6D170E-7 Komatsu SAA12V140E-3 Komatsu SDA16V159E-2 Komatsu SSDA16V159 Komatsu SDA16V160 Komatsu SSDA16V160 Komatsu SSDA16V160 Komatsu SSDA18V170 Komatsu SSDA18V170 Komatsu SSDA18V170 Komatsu SSDA18V170

M M M M M M M M AC Elec AC Elec AC Elec AC Elec AC Elec AC Elec AC Elec AC Elec

John Deere Expands E-Series Line With 260E, 310E Haulers John Deere’s two new models in its artic- in retardation capacity. provides the durability and uptime cusulated dump truck (ADT) lineup —the 260E A new automatic differential lock pro- tomers expect from an ADT, according to and 310E — are designed and built from the vides both cross-axle differential lock and the manufacturer. ground up in Davenport, Iowa, and boast inter-axle differential lock options that can The updated ADT models incorporate updated styling, new cabs, frames and axles power the ADTs through soft underfoot con- high-strength materials to provide durable, compared to their D-Series predecessors. ditions or steep terrains. In addition, the new long-lasting structures while still keeping a “Our customers in the field expressed John Deere hauler axles are designed for strong focus on overall weight and distribuinterest in the features that launched with the heavy-duty applications, and an optional tion. The machines provide enhanced larger E-Series models — including cooling package is available for extreme power-to-weight ratios and hauling efficienincreased hauling capacity; a larger, quieter conditions. The addition of hydraulically cies. A newly designed stay-tight oscillation cab; convenient ground-level daily service actuated wet disc brakes in all three axles joint, standard adaptive front suspension and and increased travel speeds,” said balanced weight distribution also proMaryanne Graves, ADT product marvide the agility and ability to navigate keting manager, John Deere hostile terrain. Construction & Forestry. To minimize the risk of rollover “We worked closely with road while unloading, the dump body can builders, site developers and the mining, be restricted from rising when the rear quarry and aggregate segments to develchassis exceeds a predetermined slope op trucks that are purpose-built and feaangle. ture the performance, productivity and Inside the haulers, John Deere durability they expect from a John reduced decibel (dBA) levels by 50 Deere machine.” percent with the addition of sound The 26-ton (23.6 t) 260E (321 hp) abatement and improved floor mat and 31-ton (28 t) 310E (354 hp) boast a The 26-ton (23.6 t) 260E (321 hp) and 31-ton (28 design, providing operators with a John Deere PowerTech 9.0 L Final Tier t) 310E (354 hp) boast a John Deere PowerTech fatigue-resistant working environment. IV engine. A purpose-built ZF transmis- 9.0 L Final Tier IV engine. A purpose-built ZF When in the operator’s seat, the cab sion includes a high-capacity retarder, transmission includes a high-capacity retarder, monitor provides an easy-to-read LCD eight forward gears and four reverse eight forward gears and four reverse gears. screen with onboard diagnostics, digigears. Compared to previous models, Compared to previous models, these trucks have tal gauges and vital system indicators. these trucks have a 125 percent increase a 125 percent increase in retardation capacity. Two ergonomically positioned

sealed switch modules simplify operation and convenience controls. The auto shutdown feature can turn off the engine after an owner-determined period of inactivity to help save fuel while reducing emissions, idle time operation and subsequent wear on the power train and hydraulics. Operators will attain new levels of productivity with standard features, such as auto dump, descent control, shuttle shifting, hill hold and load assist. The 260E and 310E both feature centralized, true ground-level servicing to simplify daily maintenance and overall serviceability. Fleet managers looking to get the most out of their 260E and 310E can rely on their John Deere dealers to provide Ultimate Uptime, featuring John Deere WorkSight. With Ultimate Uptime, owners receive predelivery and follow-up inspections that include five years of JDLink telematics, machine health prognostics, remote diagnostics, programming capabilities and the ability to add dealer-provided uptime solutions to a customized package. For more information, visit www.johndeere.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)


Construction Equipment Guide • Off-Road Truck Section • www.constructionequipmentguide.com • October 4, 2017 • Page 85

Hydrema 912EHM • Highly Mobile • Quality Built • Low Maintenance

• Built to Last • Very Low Ground Pressure • Advanced Stability & Comfort

The Ultimate Addition to Your Fleet or the Perfect Rental Machine

DEALER OPPORTUNITIES IN SELECT AREAS!

Pine Bush Equipment Co. Inc. Location: NY Tel: (845) 744 2006 www.pbeinc.com

East PBE Location: CT Tel: (860) 665 7470 www.pbeind.com

JESCO, Inc. Location: NJ, MD, DE Tel: (908) 753 8080 www.jesco.us

Anderson Equipment Company Location: Western PA, NY, NH, ME Tel: (412) 343 2300 www.andersonequip.com

Best Line Equipment Location: Eastern PA Tel: (800) 679 2378 www.bestline.com

ATS Equipment Inc. Location: MA, NH Tel: (800) 491-8565 www.atsequipment.com


Page 86 • October 4, 2017 • www.constructionequipmentguide.com • Off-Road Truck Section • Construction Equipment Guide


Paving

SECTION

Pages 87-102

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

Wirtgen Develops Next Generation of Slipform Pavers Due to its versatility in inset and offset applications, the SP 60 series slipform paver is the new multi-talent for concrete paving. With its SP 61i, SP 62i and SP 64i models, Wirtgen has developed a new generation of slipform pavers that combines the diverse applications of the globally successful SP 500, with the modern technologies of the next larger SP 90 series. Engine Technology Means More Power As part of its modification measures to comply with new emissions laws, Wirtgen has equipped the SP 60 series with greater engine output. The machines that meet EU Stage 4 and U.S. Tier IV Final emissions specifications have a 241 hp (180 kW) Deutz engine, with about 40 percent more power than the SP 500 (+20 percent at EU Stage 3a/US Tier III). Despite the higher output, fuel consumption is reduced by the Wirtgen Eco mode, which automatically adapts engine output to power requirements. New Concept in Hydraulic Technology More features than ever operate hydraulically in the SP 60 series. Due to a new hydraulic concept, energy is now used much more efficiently, making it available for new equipment options, for example, trimmers and a large delivery screw for offset applications, or the four swivel arms used to switch the machine from transport to working mode faster. The system starts as a basic version, and grows along with the number of modular equipment options selected. Customers save by choosing only the options they want. Intelligent Systems Control Technology Likewise, the intelligent machine control systems in Wirtgen’s slipform pavers are modern. Interfaces for the Wirtgen Group’s WIDIAG service diagnosis and WITOS FleetView systems support users, as does the optional Paving Plus package. Combined with this package, the swivel arms can actively circumnavigate obstacles during the concrete paving process, according to the manufacturer. The option of hydraulic rotational drives, available for all SP 60 series models, provides even better maneuverability. With hydraulic rotational drives, the 90 degree or 120 degree steering angle of the crawler tracks becomes a major advantage, for example when setting up the machine at a job site.

Inset and Offset Mold Systems Like the modular system for the SP 94i and SP 92i, customers can now choose between different slipform systems for inset paving. The slipform modules are fully compatible with the SP 90 series. The SP 64i (four crawlers on swivel arms) and SP 62i (track steering) can thus pave concrete in widths of up to 20 ft. (6 m) and thicknesses of up to 18 in. (45 cm) or more on customer request. Even widths of up to 25 ft. (7.5 m) are possible if the machine is equipped with electric vibrators (without DBI). Also available are various offset molds and a variety of typical offset options, such as trimmers, different conveyor belts or augers. The threeor four-crawler version of the SP 61i can slipform medium to large conThe new SP 60 series from Wirtgen offers flexible solutions for premium inset and offset concrete paving. crete profiles to the left or right of the machine. Contours of almost Another new development is the option of choosing any shape — roadway edging, concrete safety barriers, water between two undercarriage sizes. For professional concrete gullies and paths up to 12 ft. (3.6 m) wide — can be propaving at job sites with unpaved ground, the lanes for the duced cost-efficiently and in high quality. Due to their pavers must be stabilized ahead of time. However, the larger increased stroke, the lifting columns can now be raised up to crawler tracks exert less contact pressure per unit area, 44 in. (110 cm), and have 17 percent more power than in the reducing the pressure on the ground, thus giving the slipform SP 500. This gives the user much greater flexibility, particupaver the stability it needs. This in turn has a positive impact larly in tight job site situations, for instance when lifting a on the quality of the paving results. slipform for a concrete safety barrier. Due to its higher power reserves, it can now handle heavier offset slipforms to Synergies Between Series expand its range of applications, according to the manufacApart from integrating the latest technologies in the devel- turer. opment of the new SP 60 series, Wirtgen also adapted userfriendly operation and synergies of the SP 90 series to the SP SP 60 Series: Link Between 60 line. Inset and Offset Pavers With the new SP 60 series, Wirtgen has expanded the variUniform Operating and Control Concept ety of applications in its class of machines for widths of up Various features make the machines both simple and flex- to 20 ft. (6 m) (inset paving) and increased the range of offset ible to operate: a walkway that now extends across the full applications. width of the machine for the first time, plus a standardized The SP 60 series rounds out the high end of the offset line, operating and control concept like that in the SP 90 series, comprising the SP 15i and SP 25i. In terms of inset pavers, it comprises a central control system and four additional local bridges the gap between the small and the mid-range models control systems as standard. Intelligent interfaces support the in the SP 90 series, with paving widths up to a maximum of plug-and-play connection of additional options. For exam- 31 ft. 2 in. (9.5 m). ple, remote controls can be connected to each of the crawler For more information, visit tracks to simplify and speed up setup of the slipform paver, www.wirtgen-group.com/america. such as the positioning and zeroing of the crawler tracks and (This story also can be found on Construction Equipment swivel arms. Guide’s website at www.constructionequipmentguide.com.)


Page 88 • October 4, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Contact your local dealer: CHADWICK-BAROSS, INC. Bangor, ME 207.942.4838 Caribou, ME 207.498.2547 Westbrook, ME Contact your local 207.854.8411 Concord, dealer:NH 603.224.4063

Dealer Name

GEORGE ASSOCIATES, INC. Silver Spring, MD 301.589.9490 City, ST 123.456.7890 HIGHWAY EQUIPMENT & SUPPLY CO. City,PA ST Drums, 123.456.7890 570.788.1127 Ephrata, PA 717.859.3132 City, ST Harrisburg, PA 123.456.7890 717.564.3031 Lock Haven, PA City, ST 570.769.1070 123.456.7890 PENN JERSEY Deptford, NJ Dealer Name 856.227.6400 Middlesex, NJ 732.377.4130 City,Island, ST NY Staten 123.456.7890 718.448.2444 Lionville, PA 610.363.9200 City, ST 123.456.7890 TYLER EQUIPMENT E. Longmeadow, MA City, ST 413.525.6351 123.456.7890 Berlin, CT 860.356.0840 City, ST VANTAGE EQUIPMENT 123.456.7890 Batavia, NY 585.344.1931 Latham, NY Name Dealer 518.220.9500 Syracuse, NY 315.437.2611 City, ST 123.456.7890 WOODCO MACHINERY Avon, MA City, ST 508.584.8484 123.456.7890 Woburn, MA 781.935.3377 Johnston, City, STRI 401.942.9191 123.456.7890

Track a DENSITY IN RREAL TIME. PA SS:

PASS:

4

TEMPERATURE:

250°

D E N SITY:

5

T E M P E R AT U R E :

220°

D EN SITY:

95.1% %

94..2%

PASS:

2

TEMPERAT U R E :

270 0°

DENSITY:

92.6 6%

Volvo o olv Intelligent Compaction (IC) with Density Direct. Direct Volvo o olv has changed the game. Density Direct provides actual d density calculations in real tim me — eliminating guesswork and reducing reducing corre e sampling. Im Impr mprove mat quality, do it in less time, get yourr bonus, and win more contracts with Volv Volvo Density Direct. Learn more at volvoce.com/DensityDirect.


Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 4, 2017 • Page 89

AUTHENTIC. PROVEN. REFINED.

THE ORIGINAL IS STILL THE BEST The Roadtec “Shutttle Buggy” material transfer fer vehicle (MTV) provides un nequaled perfor formance to other o MTVs and is require ed extensively by government road departments worrldwide to achieve consistently high quality asphallt pavement. Pavement life fespan tests have shown thatt a temperature differential of less than seven deg grees Celsius in the mat behind the paver is key to eve en compaction and paveme ent durability. WITH H SHUTTLE BUGGY

Infrared imaging behind the Shuttle Buggy Buggy™ MTV M in tests conducted in the U.S. U S as well as in Europe e has shown that the machine easily and consistenttly remixes to achieve temp perature differential below the seven degree Celsius threshold. This proven per p formance has led not on nly to the machine’s populaarity all over the world, butt also allows contractors to earn maximum smoothnesss bonuses and win qualityy awards, while improving prroduction. WITHOUT SHUTTLE BUGGY

ACHIEVE YOU R BEST QUALITY TO ODA AY - VISIT ROADT EC.COM

© 2015 ROADTEC. INC. A ALL RIGHTS RESERVED

1 800 272 7100 1.800.272.

+1 423 265 0600 +1.423.265.0600


Page 90 • October 4, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Offering a range of quick-change milling drums options and efficient transition of engine to milling power, this largest cold mill in the Bomag product line is ideally suited for high performance applications such as major county roads, highways, interstates and airports.

ELLIOTT & FRANTZ, INC www.elliottfrantz.com 10421 Guilford Road Jessup, MD 20794 301/725-7394 38420 Sussex Highway Delmar, DE 19940 302/846-3033 12051 Tac Court Manassas, VA 20109 703/257-2381 450 E. Church Road King of Prussia, PA 19406 610/279-5200

MONROE TRACTOR

Bomag BM 2200/75 Cold Mill Built for Power, Production, Efficiency With its powerful 760.3-hp (567 kW) diesel engine, the new Bomag BM 2200/75 delivers high-performance milling of half-lane widths reaching 86.6 in. (220 cm) at precise milling depths of up to 13.8 in. (35 cm). Offering a range of quick-change milling drums options and efficient transition of engine to milling power, this largest cold mill in the Bomag product line is ideally suited for high performance applications such as major county roads, highways, interstates and airports, according to the manufacturer. Perfected over decades of design research and field experience, Bomag’s BMS 15 milling tooth holder system delivers increased milling productivity with low wear to extended service life by up to 30 percent over other cutting systems. The base tooth holder features a maintenance-free bolt-on design that does not require retightening to reduce service time. Featuring a low-resistance profile, the tapered tooth retainer claw delivers more cutting power with less wear. When cutting tool changing is required, the holder’s quickchange design requires approximately 25 percent of the time required to change a full set of teeth compared to conventional systems, increasing machine uptime availability, according to the manufacturer. Built with high quality hardened materials, the milling drums for the BM 2200/75 feature optimized cutting tooth arrangement for high efficiency asphalt removal. The base section of the cutting tool holder is identical for all drums, giving contractors a lower cost for replacement parts. Material ejector plates boast a symmetrical design, so they can be rotated and used twice, cutting replacement costs in half. The drum’s heavily loaded edge cutter is protected by high-performance hardened chromium carbide wear elements to increase service life, and easy access to the tool edge shortens the time for tooth exchange. With the machine’s quick-change drum design, contractors can easily switch from the standard drum for general milling to a fine milling mandrel for close tooth spacing to the power drum for demanding applications. The BM 2200/75 mill’s 35.4-in. (90 cm) wide inner and outer conveyer system quickly removes material from the cutting chamber at a flow rate of 285.5 cu. ft./min (8.1 cu m/min). The outer conveyor swivels 60 degrees left or right of center and discharges material at a height of 16.4 ft. (5 m),

allowing the mill to efficiently convey material to trucks positioned at either side of the machine. For machine transport, the conveyor hydraulically folds to reduce machine height and length, improving flexibility and ease of moving the mill from site-to-site. An integrated service platform simplifies and reduces the time for daily maintenance procedures, further improving machine uptime. All major service points, including the water system, air filter, cooling system and engine components are centralized for fast access, while high visibility markings help the technician to quickly locate machine service points The mill’s standard auxiliary one-cylinder engine provides supplemental power for refilling water tanks, cutting tooth replacement and machine cleaning, significantly reducing fuel consumption for these maintenance tasks. Accessed from ground level, large storage compartments allow for transporting tools and replacement parts. Mounted on rubber isolation buffers, the operator platform design minimizes vibration feedback to the operator, ensuring a comfortable working environment. The rotor and platform’s central machine positioning gives the operator enhanced view of both edges of the cutter housing and the entire working area to improve operating safety. The mill features an adjustable operator’s seat that slews and swivels 45 degrees for fatigue free machine operation. Logical gauge positioning and self-explanatory controls on the dash panels improve operator efficiency and allow new operators to quickly learn machine operation. The Bomag BM 2200/75 mill’s 760.3-hp liquid cooled diesel engine meets stringent Tier IV Final/Stage IV emissions standards. The 4-crawler mill features all-crawler steering and crab walk and delivers a maximum working speed of 0 to 229.7 fpm (0 to 70 m/min). Simple selection of three milling speeds — ECO/Torque, universal and speed — via a three-stage switch offers excellent utilization of torque and power for higher productivity with reduced fuel consumption and less wear, according to the manufacturer. For more information, call 803/337-0700 or visit www.bomag.com/us. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

www.monroetractor.com 1001 Lehigh Station Road Henrietta, NY 14467 585/334-3867 5035 Genesee Street Buffalo, NY 14225 716/681-7100 Toll Free: 800/834-9606 7300 Eastman Road N. Syracuse, NY 13212 315/452-0000 Toll Free: 800/287-5286 110 Old Ithica Road Elmira, NY 14845 607/739-8741 6 Equipment Drive Binghamton, NY 13904 607/754-6570

EDWARD EHRBAR, INC. www.ehrbar.com 4 Executive Plaza Yonkers, NY 10701 914/738-5100 Long Island 601 Coates Ave. Holbrook, NY 11741 631/563-7600 New York City 718/626-3331 42 Kenosia Avenue Danbury, CT 06810 203/743-0088

SCHMIDT EQUIPMENT INC. Serving MA and RI since 1956 www.schmidtequipment.com 80 Southbridge Rd. • Route 20 North Oxford, MA 01537 508/987-8786 • 800/922-8295 2397 GAR Highway • Rte 6 & 136 North Swansea, MA 02777 508/379-9810 • 800/456-6885 88 Camelot Drive • Unit 42 Plymouth, MA 02360 508/830-9997 • 800/916-0997 1620 Page Blvd Springfield, MA 01104 413/543-5595 • 800/734-5594 4 Sterling Road North Billerica, MA 01862 978/667-4345 • 800/531-2266


Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 4, 2017 • Page 91

A WIRTGEN GROUP COMPANY

Material Transfer Vehicle: MT 3000-2i Offset PowerFeeder.

TECHNICAL HIGHLIGHTS > High-performance material feeder to empty a 27.5 tons truck in just 60 seconds

> Material conveying system counteracts thermal as well as mechanical segregation

> Pivoting and inclining conveyor for high versatility > Automatic distance control system > ErgoPlus operating system for all-around visibility and intuitive controls

www.wirtgen-group.com/america

WIRTGEN AMERICA, INC. · 6030 Dana Way · Antioch, TN 37013 · Telephone: 615-501-0600 GROFF TRACTOR & EQUIPMENT, INC. www.grofftractor.com 6779 Carlisle Pike Mechanicsburg, PA 17050 800/33-GROFF 800/33-(47633)

210 Rolling Ridge Drive Bellefonte, PA 16823 888/47-GROFF 888/47-(47633)

963 South Center Avenue New Stanton, PA 15672 888/82-GROFF 888/82-(47633)

20 Stauffer Lane Ephrata, PA 17522 888/66-GROFF 888/66-(47633)

100 Smith Drive Cranberry Twp., PA 16066 877/33-GROFF 877/33-(47633)

4355 Admiral Peary Hwy Ebensburg, PA 15931 877-97-GROFF 877-97-(47633)

CENTRAL EQUIPMENT COMPANY www.centralequipmentco.com 45 Dempsey-Greaves Lane Stillwater, ME 04489 800/479-6193

W.I. CLARK CO.

KOMATSU NORTHEAST

www.wiclark.com 30 Barnes Industrial Park Rd. Wallingford, CT 06801 203/265-6781

www.komatsune.com 2820 Hamilton Blvd. South Plainfield, NJ 07080 908/561-9000

17 Eagle Road Danbury, CT 06810 203/775-1203

201 North Route 73 Winslow Township, NJ 08095 856/767-5900

80 Pratt Road Plainfield, CT 06374 860/546-4808


Page 92 • October 4, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Neal Introduces Generation IV Pumps for Asphalt Trucks Neal Manufacturing, a division of tration system, which is 60 percent more Blastcrete Equipment Company and a compact than the previous system, more leader in asphalt pavement maintenance efficient and easier to maintain. The sysequipment, has launched its new tem’s compact filters weigh 98 percent less Generation IV pumps. The pumps offer than the previous filters when full, elimiimproved durability as well as enhanced nating the need for a crane during filter spraybars and require less frequent routine changes. Neal also designed the filtration maintenance than their predecessor, resultsystem to give contractors fast and easy ing in greater uptime and productivity. access to the filters, making routine cleanRoad pavement maintenance contractors ings more manageable, according to the also save money since they can retrofit manufacturer. their existing asphalt trucks with the new Neal installs the system with dual sprayNeal pumps Gen IV rather than purchase a bars rather than one. Each spraybar is synnew truck. chronized with one 100-gpm Generation “Customers are continually seeking IV pump. The pumps and spraybars work ways to increase productivity, and once together to provide optimal efficiency and again we listened,” said Jim Farrell, output on road pavement maintenance Blastcrete CEO. “Our Generation IV projects. Gen IV pumps also offer enough pumps not only check all the boxes on our volume for larger orifice tips to all but Neal Manufacturing, a Division of Blastcrete Equipment Company photo eliminate tip plugging with aggregates. customers’ wish lists, but they also set the bar on aggregate load. No other pump han- Neal Manufacturing’s Generation IV pumps for retrofitting asphalt trucks easily hanTo ensure its customers know how to dles more aggregates and larger aggregates dle high aggregate loads and feature simple maintenance steps. Neal also significantly properly operate and maintain the modified asphalt truck spraybar designs, incorporating a pair of synchronized 6-ft. machines, Neal offers free training semithan the Neal Generation IV pump.” Neal Manufacturing designed the spraybars for the highest levels of efficiency and production. nars at its Anniston, Ala., location. All Generation IV pumps with heavy-duty machines are tested under load before “Most pumps in this industry last around 30,000 gallons being shipped to customers. features, including robotically welded pump housings and industrial-grade hydraulic cylinders for extreme durability before a rebuild is needed,” Farrell said. “We’ve had our first For more information, call 770/830-1282 or visit and longevity. These components offer enhanced reliability customer hit 300,000 gallons on our Generation IV pump www.nealequip.com. (This story also can be found on Construction Equipment and last 50 percent longer than parts on the previous model, and it’s still going strong.” The Generation IV pump also comes with Neal’s new fil- Guide’s website at www.constructionequipmentguide.com.) which means less downtime associated with rebuilds.

Volvo SD45B Drums Up Quality Compaction on Job Site The Volvo SD45B soil compactor is designed for commercial and residential site development, utility installations, driveways and landscaping jobs. Providing up to 12 degrees of oscillation and 41 degrees of frame articulation in each direction, the SD45B offers the stability and versatility required to compact in confined areas. To optimize performance, the optional Volvo strike-off blade and padfoot shell kit further help to match the exact application and material type. The fully integrated traction system provides superior climbing capabilities, even on steep inclines or slippery surfaces. The system, combined with the NoSPIN differential limits wheel or drum spin, improving productivity and safety, according to the manufacturer. Powerfully Productive In addition to ensuring a versatile performance, the SD45B also is designed to drive down operating costs. The drum system enables the operator to achieve target density in fewer passes by combining a heavy drum weight, high amplitude 0.07 in. (1.99 mm) and high centrifugal force 21,132 lb. (93 kN). When the machine is returned to neutral, the vibration system automatically

Due to its compact size, the SD45B can be swiftly and safely moved around job sites. The soil compactor can easily be loaded onto a transport vehicle without removing components. For added efficiency, the two-piece, clamp-on padfoot shell kit can be installed or removed in less than an hour. Unmatched Uptime Efficient from the ground-up, the machine is designed for quick and safe serviceability, with minimal maintenance costs. As standard on B-series models, the single Packed with technologically advanced features, the SD45B adapts to the applica- drum compactor’s tiltable platform and tion and job site, helping the operator achieve the next level of performance. hinged engine allow for simple access to all major hydraulic components and service shuts off, preventing over-compaction and points. enhancing ease of operation. Controlled Compaction Volvo also offers a range of aftermarket The Volvo Tier IV Final D3.3 engine Not only is the SD45B built to work hard, services to avoid unscheduled downtime and delivers high torque at low engine speeds, it also has operator safety and productivity at better control costs. Solutions such as providing good fuel efficiency without com- its core. The ROPS/FOPS certified canopy, Genuine Volvo Parts, MATRIS diagnostic promising power. When controls are inactive for example, offers protection without software and Customer Support Agreements for more than five seconds, the automatic restricting all-round visibility. To enhance help to ensure Volvo compactors maximize idle feature reduces the engine speed, further comfort and ease of operation, all controls return on investment for their owners. decreasing fuel consumption. During the are ergonomically-positioned from the For more information, visit work process, the passive regeneration adjustable operator seat. Because the con- www.volvoce.com. cleans the filters automatically without any trols are of the same format found in Volvo’s (This story also can be found on input from the operator or negative impact larger single drum models, a greater pool of Construction Equipment Guide’s website at on performance. operators can intuitively control the SD45B. www.constructionequipmentguide.com.)


Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 4, 2017 • Page 93

39 Jersey Street West Babylon, NY 11704 631/643-2605 www.allislandequipment.com

1001 Lehigh Station Road Henrietta, NY 14467 585/334-3867 866/683-5338

JESCO, Inc.

5035 Genesee Street Buffalo, NY 14225 716/681-7100 800/834-9606 monroetractor.com

1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080 118 St. Nicholas Ave. S. Plainfield, NJ 07080 908/753-8080 800/241-7070 www.jesco.us

1701 Roseneath Rd., Richmond, VA 23230 804/359-4048 www.richmondmachinery.com

1440 Route 9W Marlboro, NY 12542 845/236-3000 www.hoffmanequip.com Harrisburg, PA 7201 Paxton Street Harrisburg, PA 17111 800/325-6455 30 Barnes Ind. Pk. Rd. Wallingford, CT 06492 203/265-6781 17 Eagle Road Danbury, CT 06810 203/775-1203 80 Pratt Rd. Plainfield, CT 06374 860/546-4808 www.wiclark.com

King of Prussia, PA 800/733-3776 www.usmuni.com

Wilkes-Barre, PA 137 Armstrong Road Pittston, PA 18640 866/667-6756 Butler, PA 796 Unionville Road Prospect, PA 16052 724/865-9221 Ebensburg, PA 2350 Munster Road Lilly, PA 15946 814/886-5191 Albany, NY 3 Industry Drive Waterford, NY 12188 518/357-2200 Syracuse, NY 6018 Drott Drive East Syracuse, NY 13057 800/368-6455 www.walshequipmentinc.com www.stephensonequipment.com

20332 Leitersburg Pike Hagerstown, MD 21742 301/733-7414 1109 Middle River Rd. Baltimore, MD 21220 410/780-4000 www.valleysupplyequipment.com


Page 94 • October 4, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

0

% FINANCING for up to 60 months

+

THE PERFECT TIME E TO T BUY IS NOW. See your local US or Canadian Dealer for more details. Receive R 0% APR financing for up to 60 months on all new LeeBoy or LBPerformance brand Asphalt Pavers. Offer valid October 1, 2017 to December 31, 2017 7.. All financing offers subject to credit approval. Buyer mustt take retail delivery by December 31, 2017 to qualify y.. Additional terms, conditions and restrictions apply and d are subject to change. change With this exceptional offer from LeeBoy, there’s never been a better time to purchase hase a new paverr.. We W are LeeBoy y.. The name behind the world’s most dependable and productive commercial cial asphalt paving equipment.

0% FINANCING for up to

60 MONTHS M T O F I N D A D E A L E R A N D T O L E A R N M O R E A B O U T T H I S L I M I T E D T I M E O F F E R , V I S I T W W W. L E E B O Y. C O M

1-800-223-1202 I WWW.ASPHALTCARE.COM 2765 Galloway Road • Bensalem, PA 19020 WE SUPPLY PARTS FOR ATLAS COPCO/DYNAPAC, MARATHON EQUIPMENT, MAULDIN, BROCE BROOM, YANMAR, TOWMASTER, SNOWEX AND MANY OTHERS!!!

New & Used in Stock! $56,000 MARATHON EQUIPMENT KEB-115T Under-Fired Road Repair Kettle, capable of melting asphalt cement, Used units starting at $5,018.

TE LOW RA ILABLE NG AVA FINANCI

2006 MAULDIN 1750C PAVER Silver 16 screed w/ auto ignite propane, John Deere diesel, steel tracks w/ poly pads, new screed plate, good augers w/ sonic feed.

$38,000

In Stock

$40,400

CASE SR250 SKID STEER Only 278 hrs, 67 hp. high flow, cabin w/ AC & heat, radio, bucket, very clean.

DYNAPAC CC950 ROLLER 1.5 ton, 35” drums w/ front drum vibration, Kubota diesel, foldable ROPS, great climber!

LEEBOY 7000 Approx. 1000 hours, machine is in great condition, 8’ to 13’ screed Conveyor Fed, LP Screed, Hatz Diesel

MARATHON ROAD EQUIPMENT IN STOCK!

Oil Jacketed Kettles, Hot Mix Transporters, Tack Distributors, AC-20 Kettles, and Infrared Asphalt Repair


Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 4, 2017 • Page 95

ALL ISLAND EQUIPMENT 39 Jersey Street West Babylon, NY 11704 631/643-2605 allislandequipment.com

AMBROSE EQUIPMENT CO. 1401 Hooksett Rd. Hooksett, NH 03106 603/644-8787 1 Madison Street Plainville, MA 02762 508/643-0044 www.ambroseequipment.com

JESCO, Inc. 1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 • 800/321-8080 118 St. Nicholas Ave. S. Plainfield, NJ 07080 908/753-8080 • 800/241-7070 www.jesco.us

HOFFMAN EQUIPMENT COMPANY 1440 Route 9W Marlboro, NY 12542 845/236-3000 www.hoffmanequip.com

VALLEY SUPPLY & EQUIPMENT CO., INC. 20332 Leitersburg Pike Hagerstown, MD 21742 301/733-7414 1109 Middle River Rd. Baltimore, MD 21220 410/780-4000 www.valleysupplyequipment.com

C o m m i t t e d t o Q u a l i t y . C o m m i t t e d t o Yo u . Th roug h out th e w orld , th h e L e eBoy b r a n d r epr es en t s qu a lit it y a n d d epen d a b le e q uip me nt th at c ontinue e s to m a xim iz e pr od u ct iv it y , d eliv er pr ofit a b ilit y a n d p rovid e p e ac e of mind to o our d ea ler s a n d en d u s er s a lik e .

MONROE TRACTOR 1001 Lehigh Station Rd. Henrietta, NY 14467 585/334-3867 • 866/683-5338 5035 Genesee Street Buffalo, NY 14225 716/681-7100 • 800/834-9606 www.monroetractor.com

US MUNICIPAL SUPPLY INC. King of Prussia, PA 800/733-3776 www.usmuni.com

W.I. CLARK COMPANY 30 Barnes Ind. Pk. Rd. Wallingford, CT 06492 203/265-6781 17 Eagle Road Danbury, CT 06810 203/775-1203 80 Pratt Rd. Plainfield, CT 06374 860/546-4808 www.wiclark.com

Harrisburg, PA 7201 Paxton Street Harrisburg, PA 17111 800/325-6455 Wilkes-Barre, PA 137 Armstrong Road Pittston, PA 18640 866/667-6756

A SPHALT PAVERS

1000

5300

6150 0

8510 510

8 8515

8520 0

7000

8500

8616

8816

Butler, PA 796 Unionville Road Prospect, PA 16052 724/865-9221 Ebensburg, PA 2350 Munster Road Lilly, PA 15946 814/886-5191 Albany, NY 3 Industry Drive Waterford, NY 12188 518/357-2200 Syracuse, NY 6018 Drott Drive East Syracuse, NY 13057 800/368-6455

FORCE FEED D LOADER

MOTOR GRADERS

685

695

3000 0

ROLLERS

400

420

MAINTAINER

TACK TANKS

For more information, visit

www.LeeBoy.com

www.walshequipmentinc.com www.stephensonequipment.com

Manufactured in the USA

150

250

500 0

1200


Page 96 • October 4, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Sakai America Offers First Glimpse of Tier IV Final Single-Drum Upgrades Sakai America introduced upgrades to three of its single-drum vibratory rollers. The Sakai SV204, SV414TF and SV544FB now feature Tier IV Final engines and enhanced capabilities as single-drum vibratory roller solutions in drum widths 54 to 84 in. (137 to 213 cm). The upgraded designs are available with either smooth (D) or padfoot (T) drum, with smooth shell kits available for all models and either style, padfoot or smooth (DF and TF), on the SV544. A strike-off blade will be available across the line as well for the padfoot drum model (TB) and padfoot with shell-kit models (FB). SV204 The enhanced safety and performance of the new 54-in. roller include an elevated exhaust pipe promoting health and safety even while compacting in trench applications. The SV204 includes Sakai’s drum vibration system and floating deck, isolating the operator from vibration. The roller is powered by a high-output, EPA Tier IV Final 3.3 L Kubota engine. Maximum operating weight and axle load specifications are for full fuel and water and vary by rig configuration. Maximum weight for the various configurations range from 10,220 lbs. (4,675 kg) to 11,980 lbs. (5,435 kg); load on front axle, from 4,795 lbs. (2, 175 kg) to 6,560 lbs.s (2,975 kg); with load on rear axle generally 5,425 lbs. (2,460 kg). Vibratory frequency of 1,800 vpm with amplitude of 0.039, 0.060 or 0.065 in. (1, 1.52 or 1.65 mm) depending on configuration. Ground clearance is 11 in. (29 cm) with smooth drum and 12 in. (30 cm) for pad foot configurations. Curb

clearance is 12 in. (31.5 cm) in all but the padfoot with blade version, for which curb clearance is 13 in. (33 cm). SV414TF Soil Roller Powered by a Cummins QSF2.8, Tier IV Final diesel engine, the Sakai SV414 roller’s basic maximum operating weight with pad-foot drum and shell kit is 18,464 lbs. (8,375 kg) with a front axle load of 10,450 lbs. (4,740 kg) and rear axle load of 7,893 lbs. (3,580 kg). Like all Sakai compaction machines, the SV414 soil roller with 67-in. (170 cm) wide drum offers a variety of frequency and amplitude combinations. For the SV414 these are two frequency options, a low frequency of 1,800 vpm and high frequency of 2,280 vpm, with two amplitude options, low amplitude of 0.020 in. (0.5 mm ) and high amplitude of 0.039 in. (1.0 mm). Ground clearance is 13.4 in. (34 cm). Curb clearance is 17.3 in. (44 cm), and side clearance of 3.98 in. (10.1 cm). The SV414 soil roller features Sakai’s proprietary traction control system, and all vibration controls are ergonomically located in the instrument panel.

The SV544FB The SV544FB is an 84-in. dirt roller featuring a Cummins QSF3.8 diesel engine and Sakai’s ECO-Mode for high-performance and low-fuel usage without requiring DPF or Regen cycling. Excellent drum edge visibility, and Sakai’s traction control system combine for speedy, high-quality compaction with an expanded speed range: 2.5 to 6 mph (4 to 10 kmh). Maximum operating weight of the SV544 with pad-foot drum, strike-off blade and shell kit is 31,530 lbs. (14,315 kg) with front axle load of 20,020 lbs. (9,090 kg) and rear axle load of 11,310 lbs. (5,135 kg). Several frequency and amplitude combinations are possible, ranging from low frequency 1,700 vpm to a high frequency setting of 2,000 vpm, with a low amplitude of 0.021 in. (0.53 mm ) or a high amplitude of 0.049 in. (1.24 mm). Ground clearance of 18.5 in. (47 cm). Curb clearance 22.2 in. (56.5 cm) and side clearance of 7.3 in. (18.5 cm). Specifications may change without notice. For more information, visit www.sakaiamerica.com.

Shawn Sweet will serve as Bomag’s vice president of sales & marketing for North America.

Bomag Announces Sweet as Veep of Sales, Marketing

Shawn Sweet has joined Bomag Americas Inc. as vice president sales & marketing. He will be responsible for the leadership of the Bomag dealer and rental sales teams, marketing, product management and for developing new business opportunities. Sweet is a well-known figure in the construction industry (This story also can be found on with more than 27 years of experience. The first 17 years of Construction Equipment Guide’s webhis career was spent in various capacities at Ingersoll Rand site at www.constructionequipmentCompany, where he was instrumental in the growth of their guide.com.) road machinery business, amongst other. Shortly after the acquisition by Volvo of the IR road machinery business, The Sakai SV204, SV414TF and Sweet spent seven years as the business unit president of SV544FB now feature Tier IV Doosan Infracore Portable Power, and, most recently spent Final engines and enhanced the past three years as vice-president and COO of ASC capabilities as single- Construction Equipment (Volvo dealer). drum vibratory roller “Due to Bomag’s tremendous growth these past few solutions in drum years, coupled with our future growth prospects, we need to widths 54 to 84 strengthen the support for our customers. Shawn’s extensive in. (137 to 213 cm). background in managing dealer and rental channels with The upgraded road machinery equipment, plus his experience operating designs are equipment dealers is an absolutely perfect fit for what available with Bomag needs to help our customers expand their business either smooth with us,” said Rob Mueckler, president of Bomag. (D) or padfoot “I believe in Bomag’s products and in the company’s ded(T) drum, with ication to its customers within the equipment dealer and smooth shell rental industry. They are committed to product innovation kits available for all models and improving its support services to our road building cusand either style, tomers and I look forward to continuing those initiatives,” padfoot or said Sweet. Sweet joined the Bomag team on Aug. 1 and will operate smooth (DF and TF), on the SV544. A out of its new North American headquarters located in strike-off blade will Ridgeway, S.C. be available across For more information, visit www.bomag.com/us.

the line as well for the padfoot drum model (TB) and padfoot with shell-kit models (FB).

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)


Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 4, 2017 • Page 97

Lumberton, NJ 08048 609-267-2020

Frederick, MD 21703 301-874-5500

www.jesco.us

Beacon, NY 12508 845-831-1800

Delmar, MD 21875 410-546-1090

South Plainfield, NJ 07080 908-753-8080

Deer Park, NY 11729 844-482-0910

White Plains, MD 20695 301-870-1438

Fairfield, NJ 07004 973-227-2221

Baltimore, MD 21237 410-687-1700

Middletown, DE 19709 302-376-0784

JESCO, Inc.

Woburn, MA 781-935-1919

Stephenson Equipment, Inc. www.stephensonequipment.com Philadelphia, PA 800-220-4033

Wilkes-Barre, PA 866-667-6756

Harrisburg, PA 800-325-6455

Syracuse, NY 800-368-6455

Albany, NY 518-357-2200

C.N. Wood Co., Inc. www.cn-wood.com

Avon, MA 508-584-8484 Whately, MA 413-665-7009 Johnston, RI 401-942-9191


Page 98 • October 4, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Hamm’s Easy Drive Enables Optimum Machine Operation Simple and Clearly Laid Out The centerpiece of easy drive is its clear operating structure. Steering is always done by means of a steering wheel. All other essential functions are operated via the joystick with clearly visible buttons, and the multifunction armrest. Here, all operating elements are arranged according to the principle: the more frequently an element is operated, the closer its position to the joystick. At the same time, the operation is designed to be entirely language-neutral. Due to the color coding of all operating elements, Hamm achieves unambiguous assignment and a clear overview.

Modern construction machines are high-tech units whose engineering enables more functions to be carried out than ever before. Whether these are recognized and used by drivers, however, is crucially dependent on the quality of the operating concept. So that the drivers of Hamm rollers can use all the functions to their full extent, the developers attach the utmost importance to simple, intuitive operation. No easy task, since the modern rollers are complex tools. The operation of modern construction machines frequently overtaxes drivers with a surfeit of switches, displays and buttons. A common problem is a lack of clarity as to how to carry out important settings. Moreover, tedious searching in the depths of the operating menus is a stress factor for operators. On Hamm rollers, it’s a different story. Many years ago, the Tirschenreuth-based roller manufacturer recognized that intuitive operation makes a major contribution to the productivity of mobile machinery. That’s why Hamm places enormous emphasis on optimum machine operation.

Ergonomic and Flexible With the help of universities and ergonomics specialists as well as roller drivers from different countries, Hamm also has ergonomically optimized the operating concept. The results speak for themselves: drivers can turn the seat in the tandem rollers in either direction and move it from side to side as standard. What’s more, the position and suspension of the seat, the position of the armrests and the inclination of the dashboard are adjustable on all easy drive rollers. Due to the wealth of adjustment options, every driver will quickly find a healthy sitting position in the easy drive machines, according to the manufacturer.

Clarity and Intuitive Operation The latest innovation in this area is the easy drive operating concept. It emerged Easy drive in the Hamm DV+: here the driver’s seat, steering column, dashboard, joystick as part of the development of the newest and multifunction armrest form a harmonious unit that enables relaxed working. machine generations and is characterized in particular by intuitive operation. It enables drivers to Convenient Access and More respond quickly and correctly, even without extensive Easy drive also is remarkable for helpful features, such previous knowledge. This is made possible through a as the wide stepway to the spacious cabin or operator’s minimal number of intelligently arranged switches, good platform. Folding armrests and a forward tilting steering visibility in the operator’s platform and short learning column making it easy to get on and off also are standard. and familiarization times. Documents and personal items can be securely stored in A Single Concept for All Rollers Hamm has integrated the easy drive operating concept in the tandem rollers of the DV+ and HD+ series, and in the H series compactors. All rollers now have the same colors for the same function groups and a common design, adapted to the specific functions of the series. At the same time, the operating elements for the same functions will always be in the same position on the operator’s platform. Axel Römer, head of development and design at Hamm, explained the fundamental thinking behind it: “If all Hamm asphalt construction and earthwork rollers operate with easy drive, anyone who has ever operated a ‘Hamm’ will instantly feel at home on all other Hamm rollers. In this way, we make life easier for operators when switching to a different machine type. They instantly identify important functions. This enables topquality work right from the start and quickly builds up confidence.”

Through extensive studies and tests, Hamm has developed the optimum layout for an ergonomic work space in the current rollers.

the many compartments around the seat, and 12 V sockets provide power for a cell phone or coolbox. The easy drive operating concept has been available in the DV+ series tandem rollers since 2015 and has been well-received by drivers. The jury members of the iF International Forum Design also were impressed by the concept and awarded it the iF design award 2015 for first-class product design. The easy drive operating concept received two further awards in February 2016: the “Universal Design expert favorite” label from a jury of experts and the “Universal Design consumer favorite” label from a jury of 50 users. This recently established design award highlights products which are flexible, easy and intuitive in use and whose operation and design reduces complexity to the minimum. For more information, visit www.wirtgen-group.com/america. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)


Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 4, 2017 • Page 99

MT-300

690-G

t

1550-D

Products shown with optional equipment.

MAULDIN Paving Products is dedicated to developing products that exceed expectations. See for yourself what makes the industry’s heaviest screed lay down the Superior mats your company desires. With over 10 years under the belt of proven results, the Silver-16 Screed is better than ever.

MAULDIN Paving Products... MASTERS OF THE MAT! Contact your MAULDIN dealership today and review all the choices available from the MAULDIN 1750-C 2I¿ FLDO &DWDORJ WR VSHF RXW D & WKDW SHUIHFWO\ PDWFKHV \RXU SDYLQJ SUHIHUHQFHV

GEORGE

ASSOCIATES, INC. Construction and Industrial Equipment

2340 Montgomery George Associates, Inc. Street Silver Spring, MD 20910

P Fax: 301-588-6605

2340 Montgomery St. Silver Spring, MD 20910 (301) 589-9490 Fax: (301) 588-6605 www.georgeassociates.info

Asphalt Care Equipment Inc. 2765 Galloway Road Bensalem, PA 19020 (215) 639-9800 (800) 223-1202 Fax: (215) 639-9802 www.asphaltcare.com

Woodco Machinery

East PBE Inc.

www.woodcomachinery.com

283 Pane Rd. Newington, CT 06111 (860) 665-7470 Fax: (860) 665-7478 www.pbeinc.com

60 Shun Pike Johnston, RI 02919 (401) 942-9191 Fax: (401) 942-9266

140 Wales Avenue Avon, MA 02322 (781) 935-3377 Fax: (781) 935-1563

22 North Maple Street Woburn, MA 01801 (781) 935-3377 Fax: (781) 935-1563

Vantage Equipment 5985 Court St. Rd. Syracuse, NY 13206 (315) 437-2611 17 Northway Lane Latham, NY 12110 (518) 220-9500 4554 W. Saile Dr. Batavia, NY 14020 (585) 344-1931 www.vantageeq.com


Page 100 • October 4, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Vögele’s New Super 1700-3i, 1703-3i Pavers Feature ErgoPlus3 The 8-ft. (2.4 m) paver segment is of central importance to many road construction companies, because with these machines they can cover a wide range of applications, from small municipal job sites to highway construction and rehabilitation. With their strong performance and a uniquely compact design, the Super 1700-3i and Super 1703-3i pavers put Germany-based Joseph Vögele AG at the forefront of technology in this field. They also integrate the practical features that make the “Dash 3” generation of SUPER pavers synonymous worldwide with modern road pavers — most notably the intuitive and ergonomic ErgoPlus 3 operating concept. Pavers in the 8-ft. class are road construction machines that are designed to achieve maximum performance both in confined conditions and on highway job sites. What may sound like conflicting objectives has led Vögele’s design engineers to a future-oriented solution. The result is the new Super 1700-3i tracked paver and Super 1703-3i wheeled paver, ultra-modern machines that are compact but powerful, and thus meet the highest demands, according to the manufacturer. The Super 1700-3i and Super 1703-3i

integrate many advantages that pay off under demanding operating conditions. For example, the material handling concept that effectively counteracts thermal and mechanical segregation by such means as its cleverly designed receiving hopper, ascending conveyors and hydraulic augers, the height of which can be adjusted by 6 in. (15 cm). Maximum Ease of Operation With the Intuitive ErgoPlus 3 Operating Concept For Vögele, however, design means much more than just meeting the demands of construction companies and customers. Every Vögele development focuses above all on the user, as evidenced by the ErgoPlus 3 operating concept. It encompasses an ergonomic paver operator’s platform with numerous intelligent details, such as a hardtop with an extendable sunshade and comfortable seats that swing out to the side. The heart of the ErgoPlus 3 system is the operating consoles for the driver and screed operator. All functions are arranged here in logical groups, push-buttons support reliable operation even when wearing work gloves, and the backlit color displays make it easy to clearly read current settings, even at night or in bright sunlight.

G+® is the Future in Concrete Paving

info@gomaco.com ❘ www.gomaco.com CONCRETE STREETS AND HIGHWAYS ❘ AIRPORT RUNWAYS ❘ CURB AND GUTTER ❘ SIDEWALKS RECREATIONAL TRAILS ❘ SAFETY BARRIER ❘ BRIDGE PARAPET ❘ BRIDGE DECKS ❘ IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA ❘ 712-364-3347 Murrysville, PA

Somerset, PA

724/327-1300

814/445-7915

Lantz Corners, (Kane), PA

Cranberry Twp., PA

814/778-5250

724/776-1400

Clearfield, PA

Erie, PA

Clarksburg, WV

814/765-1611

814/898-3388

304/842-2222

www.clevelandbrothers.com

Strong Performance: Ready to Give Their All A paver that has to master a variety of construction projects must be designed for the maximum required level of performance. For the new 8-ft. pavers, combined with the Vögele front-mounted extending screed and hydraulic bolt-on extensions, this maximum is at 19 ft. 6 in. (5.95 m). Strong performance, even when operating at this maximum paving width, is provided by a liquid-cooled 4-cylinder Cummins diesel engine, which even functions reliably under extreme climate conditions. The engine has an output of 173 hp (129 kW) at 2,000 rpm. When working in ECO mode, which is sufficient for most applications, the engine runs at a maximum of 1,700 rpm, further reducing noise emissions and fuel consumption. Laydown Rates of up to 770 Tph The entire material handling system of the Super 1700-3i and Super 1703-3i also is designed for high output, starting with the extra-large receiving hopper with a capacity of 14.3 tons (13 t), which supports the easy and rapid supply of mix from the trucks. Even a truck hitch is available. High-pow-

ered, separate hydraulic drives on the conveyor and auger deliver an optimum head of mix in front of the screed in every paving situation: They support high laydown rates of up to 770 tph (700 t/h). To transfer this performance onto the road, both pavers have outstanding traction. For the Super 1703-3i wheeled paver, customers have a choice between a 6x4 and 6x6 drive. Stability Combined With Variability Vögele views the paver and screed as a single system, and closely coordinates the two during development. This is evident in the combination of the Super 1700-3i and Super 1703-3i with the front-mounted VF 500 extending screed. It features extremely high stability for maximum evenness and great variability. With the ErgoPlus 3 screed console, the screed can be adjusted infinitely variably and rapidly in a range from 8 to 15 ft. 6 in. (2.45 to 4.75 m), or with bolt-on extensions to 19 ft. 6 in. (5.95 m). For more information, visit www.witgen-group.com/america. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)


Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 4, 2017 • Page 101

A. Montano Co, Inc. 571 Route 212 • Saugerties, NY 12477 845/247-0206 www.amontanoco.com

Ambrose Equipment Co. 1401 Hooksett Road • Hooksett, NH 03106 603-644-8787 1 Madison Street • Plainville, MA 02762 508-643-0044 www.ambroseequipment.com

Groff Tractor New Jersey, LLC 551 N. Harding Highway • Vineland, NJ 08630 800-874-2650 212 Monmouth Rd. • Freehold, NJ 07728 800-874-2659 200 Bomont Place • Totowa, NJ 07512 800-558-7426 www.grofftractor.com

Highway Equipment Company 22035 Perry Highway • Zelienople, PA 16063 724-452-7800 5846 West Road • McKean, PA 16426 814-476-7755 4690 Route 219 • Dubois, PA 15801 814-371-3600 www.highway-equipment.com

Midlantic Machinery 2240 Bethlehem Pike • Hatfield, PA 19440 215-822-0145 6375 Allentown Blvd. • Harrisburg, PA 17112 717-652-3190 1261 Highway 315 • Wilkes Barre, PA 18702 570-824-9891 6 S. Eleanor Ave. • Frackville, PA 17931 570-874-6140 1400 Joh Avenue • Baltimore, MD 21227 410-247-2100 28587 Sussex Hwy. • Laurel, DE 19956 302-715-5382 www.midlanticmachinery.com

Tracey Road Equipment Syracuse 6803 Manlius Center Rd • East Syracuse, NY 13057 315-437-1471 Binghamton 1523 Route 11 North • Kirkwood, NY 13795 607-775-5010 Rochester 300 Middle Rd • Henrietta, NY 14467 585-334-5120 Watertown 19598 Cady Road • Adams Center, NY 13606 315-788-0200 Albany 115 Railroad Ave. • Albany, NY 12205 518-438-1100 www.traceyroad.com

www.sakaiamerica.com (800) 323-0535


Page 102 • October 4, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

866-430-7539

www.jfwequipment.com sales@jfwequipment.com

Serving the Asphalt Industry for 30 Years 2002 Etnyre Shooter distributor, 2000 gal, computer w/1 ft cutoffs, propane heat, 12 ft spray bar, GMC C7500 w/Cat 3126 diesel eng, 5 spd auto trans

2005 Blaw Knox PF 3200 paver, Omni IIIA 10-18 ½ ft screed w/diesel heat, power crown and slope, Cummins 5.9L diesel engine, power auger tunnels

2009 Cat AP1055D paver, Carlson EZ-IV-1019 w/electric heat, Cat C7 diesel, power tunnels, auger sensors (in paint shop now - pics prior to paint)

2012 Volvo DD25W double drum 47” vibratory roller, double drum drive, hydrostatic drive, Kubota diesel engine, water system, 3 ton roller

2010 Rosco Maximizer II distributor, 1950 gallons, EZ2S computer w/1 ft cut-offs, propane heat, 12 ft spray bar, IH Workstar w/Maxxforce DT diesel, auto trans

PLEASE CONTACT YOUR BAGELA ASPHALT RECYCLER DEALER:

www.ehrbar.com

Yonkers, NY

www.centralequipmentco.com

4 Executive Plaza, Yonkers, NY 10701 914-738-5100

Stillwater, ME 45 Dempsey-Greaves Lane, Stillwater, ME 04489 800-479-6193 Fax: 207-827-3774

Holbrook, NY 601 Coates Ave., Holbrook, NY 11741 631-563-7600 2004 Etnyre Centennial II distributor, 2000 gallons, computer w/1 ft cut-offs, diesel heat, 12 ft spray bar, Sterling w/Cat C7 diesel, 9 spd trans

New Marathon TPS250T tack distributor, Honda 5.5hp gas engine, 10GPM pump, 250 gallons, spray wand w/40 ft hose, propane burners, flushing system, electric brakes

Gorham, ME 54 Olde Canal Way, Gorham, ME 04038 800-479-6193

Danbury, CT 42 Kenosia Ave., Danbury, CT 06810 203-743-0088

Construction, Crane & Tractor www.constructioncraneandtractor.com

Folcroft, PA 1545 Hook Rd., Folcroft, PA 19032 610-586-2710

Piscataway, NJ 300A S. Randolphville Rd., Piscataway, NJ 08855 732-752-2828 1997 Etnyre S-2000 distributor, 2000 gallons, computer w/1 ft cut-offs, propane heat, 13 ft spray bar, Ford F800 w/Cummins 5.9L diesel engine, 5 spd trans, 2 spd 2008 Bomag BW9AS static roller, 5-8 ton, 50” drums, axle Cummins 3.3L diesel engine, water system

3517 Wayne White Rd., Climax, NC 27233

US Distributor www.pavementrecyclers.com

70 Platt Road Shelton, CT 06484 203-944-0525


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 103

ASPHALT CARE EQUIPMENT, INCORPORATED 2765 Galloway Road Bensalem PA 19020 215/639-9800 1-800/223-1202 Fax: 215/639-9802 www.asphaltcare.com

BARRY EQUIPMENT COMPANY, INC.

CHAPPELL TRACTOR SALES

30 Birch Island Road Webster, MA 01570 508/949-0005 Fax: 508/943-9072 www.barryequipment.com

454 Route 13 South Milford, NH 03055 800/698-2640 251 Route 125 Brentwood, NH 03833 800/616-5666 391 Loudon Rd. Concord, NH 03301 800/358-6007 www.chappelltractor.com

EQUIPMENT EAST, LLC 61 Silva Lane Dracut, MA 01826 978/454-3320 Fax: 978/454-3325 www.equipmenteast.com

PITTSFIELD LAWN & TRACTOR 1548 W. Housatonic St. Pittsfield, MA 01201 413/443-2623 Fax: 413/499-0023 www.plt.com

JERSEY RENTS 252 Atlantic City Blvd. Bayville, NJ 08721 732/361-4487 Fax: 732-606-0640 322 Spring Valley Road Old Bridge, NJ 08857 732-591-2088 www.jerseyrents.com


Page 104 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mecalac Addresses Market Needs With Terex Coventry Deal MECALAC from page 28

range. Machines that can dig, load and transport.” Marchetta added that Mecalac responded to that demand for transport by bringing dumpers into the range. “The historic markets that have driven our growth and the history of the brand continue to underpin Mecalac’s activities and are a source of inspiration for our research and development,” he said. “But not all markets have the same expectations in terms of construction machinery and some are looking for different machines, which reflect a different view of urban construction sites. That’s where our new production plant, Mecalac Construction Equipment UK, will complement our overall offer.” The acquisition of Terex Coventry came at a time when Mecalac was looking to extend and diversify its offer to respond to the demands of other types of markets than those in Northern and Southern Europe. Henri Marchetta’s son, Alexandre Marchetta, who is vice chairman, added, “Our new global offer means we can now provide relevant solutions of the right size to meet expectations in the Maghreb, Eastern Europe — including Russia, which is starting to approach us again — central Africa, the Middle East and new territories for us: Australia, North and South America. Mecalac Construction Equipment UK is therefore opening the doors to new markets for us, where there is a high demand for dumpers, backhoe loaders and compactors.”

United States Mecalac Dealers Lorusso Heavy Equipment 160 Elm Street Walpole, MA 02081 Massachusetts/Vermont/Maine/New Hampshire/Connecticut/Rhode Island Powerco Inc. 7247 Penn Drive Allentown, PA 18106 Northeast Pennsylvania and northern New Jersey OK Rentals 640 Main street Darby, PA 19023 Southeast Pennsylvania and northern Delaware Rob’s Hydraulics Inc. 7765 Pitt Street Grimesland, NC 27837 East of North Carolina and southeastern of Virginia Reynolds Warren Equipment Co. 1945 Forest Parkway Morrow, GA 30260 Georgia

The new MWRs transform worksite logistics due to its incredible stability in any position and on any terrain. Whatever the conditions, the machines stay balanced both when travelling in transfer operations between sites, as well as during work phases.

People are central to Mecalac’s success and that isn’t going to change (and has not changed) as the result of acquiring a new business. “Our network of current dealers is firmly attached to the Mecalac brand and we have known them for a long time,” said Henri Marchetta. “They are loyal to us and we have developed a stable relationship with them, which we maintain on a daily basis. The new dealers from the distribution network for products made at our Coventry plant will now form part of that organization, based on the same values of stability, loyalty and professionalism. Because for the Mecalac group, collaboration without mutual trust is unthinkable. It’s one of our core characteristics and we see it as a strength: a value we share with our distributors.” Alexandre Marchetta echoed his father’s view of trust. “One of the things that attracted us in acquiring Terex Coventry was also the existence of a team, a network of distributors as much as customers and prospects, whom we can rely on,” he said. “It comes back to helping them share our values, corporate vision and brand messages, and supporting them in this new, shared adventure so that they become Mecalac ambassadors. Moreover, the professionalism of our historical dealers leaves us in no doubt about their ability to welcome new partners and an extended product range. Every sale has always been and will remain a personal interaction, and our dealers are and will be trained in our products and our customers’ business sectors. Now made up of 200 dealers, our network is a highly dedicated group of skilled people and a real source of strength for the future of Mecalac.” For more information, visit http://www.mecalac.com/en/. (Construction Equipment Guide’s Craig Mongeau and Kent Hogeboom contributed to this article.) (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

The MWR’s fuel tank is extremely easy to access because it is located in the undercarriage, level with the step that leads straight to the cab.

The MWR’s spacious cab is 20 percent lower when compared with other similar products on the market and entering and exiting the vehicle requires much less effort.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 105

W.I. CLARK COMPANY www.wiclark.com 30 Barnes Industrial Park Rd Wallingford, CT 06810 203/265-6781

Danbury, CT 06810 203/775-1203 Plainfield, CT 06374 860/546-4808

SCHMIDT EQUIPMENT INC. www.schmidtequipment.com 80 Southbridge Rd. North Oxford, MA 01537 508/987-8786 Billerica, MA 01862 978/667-4345

Plymouth, MA 02363 508/830-9997 No. Swansea, MA 02777 508/379-9810 Springfield, MA 01104 413/543-5595

JESCO, Inc. www.jesco.us 118 St. Nicholas Ave. South Plainfield, NJ 07080 908/753-8080 800/241-7070 Fairfield, NJ 07004 973/227-2221 800/321-8080

Lumberton, NJ 08048 609/267-2020 888/217-0600 Beacon, NY 12508 845/831-1800 800/724-0725 Deer Park, NY 11729 844/482-0910

ELLIOTT & FRANTZ, INC. ELLIOTT & FRANTZ, INC. www.elliottfrantz.com 6680 Allentown Blvd. Harrisburg, PA 17112 717/652-5430

12051 Tac Court Manassas, VA 20109 703/257-2381

10421 Guilford Road Jessup, MD 20794 301/725-7394

450 E. Church Road King of Prussia, PA 19406 610/279-5200

38420 Sussex Highway Delmar, DE 19940 302/846-3033

RUDD EQUIPMENT COMPANY www.ruddequipment.com 4344 Poplar Level RD Louisville, KY 40213 502/456-4050 Pittsburgh, PA 412/741-1731

Clearfield, PA 814/765-8500 Charleston, WV 304/755-7788

NORTRAX www.nortrax.com 1505 Caribou Road New Canada, ME 04743 207/834-6701 34 Page Road West Hermon, ME 04401 207/947-6786 106 North Street Houlton, ME 04730 207/532-6517 396 County Road Westbrook, ME 04092 207/773-3777 98 Sheep Davis Road Pembroke, NH 03275 603/225-2769

14 The Crossing Boulevard Clifton Park, NY 12065 518/371-5111

From the moment you first experience the efficiency, reliability and durability of a Hitachi excavator, you too will become Hitachi To The Core. These machines can help take productivity to the next level and boost your bottom line. So operators can do what they say.

1486 US Highway 11 Gouverneur, NY 13642 315/287-0703 300 Clinton Street Springfield, VT 05156 802/885-6840 375 Engineers Drive Williston, VT 05495 802/658-2121

HitachiConstruction.com


Page 106 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Crews Build Slurry Wall for High-Rise in Boston’s Growing Seaport District The Seaport District of south Boston has experienced explosive growth over the past decade, and with the announcements of General Electric moving its headquarters and Amazon building a major facility in South Boston, the growth rate has achieved even greater levels. The current level of construction in Boston is rivaling Big Dig levels. Among the major projects currently under way is the $900 million mixed residential and commercial project at 145 Seaport Blvd.. This project, owned by California’s Cottonwood Management, includes three mixed use towers containing 1.3 million sq. ft. constructed on a 3-1/2 acre parcel. Two of the towers will contain more than 400 combined luxury condominium residences, and the third tower will contain 733 luxury apartment residences along with 125,000 sq. ft. of retail and restaurant spaces. Residential amenities will include two signature outdoor pool areas, an indoor pool, expansive sundecks, courtyards and oversized private terraces. Construction on this project began in January 2017 and completion is anticipated in early 2020.

Ambrose Equipment Co. 1401 Hooksett Rd. Hooksett, NH 03106 603-644-8787 1 Madison Street Plainville, MA 02762 508-643-0044 www.ambroseequipment.com

Able Tool & Equipment 410 Burnham Street South Windsor, CT 06074 860-289-2020 www.abletool.net

Used for pick and carry situations, this Mantis 15010 77-ton hydraulic boom crawler crane has been a good fit for Treviicos. Here, the crawler is being used to drop a slurry wall cage.

ical and educational facilities. While Treviicos is widely diversified, the core of its reputation in New England was built around slurry wall construction. On the Seaport Boulevard project, Boston’s Silver Line subway tunnel dissects the job site at depths ranging between 18 and 40 ft. below the surface. This had to be taken into consideration in the engineering and design of the slurry wall when the tunnel area comes into play. As a result of this, a slurry wall runs parallel to the tunnel area on each side of the tunnel.

Treviicos The slurry wall construction of this project has been awarded to Treviicos, the North American subsidiary of Trevi. Treviicos was set up in 1997 when Trevi’s underground engineering and tunneling division purchased ICOS Boston, a company with a 40-year history in the United States. The two company names were combined to form Treviicos. Jeffrey Taylor (L), senior ICOS Boston had specialized in the slur- project manager of ry wall foundation construction process. Treviicos and Justin Melvin, This process made possible the construc- New England sales repre- Slurry Wall Construction Begins tion of hundreds of infrastructure projects sentative of Empire Crane. When construction of the slurry wall and many noted buildings, including the begins, one of the most obvious differences original World Trade Center, according to the company. from conventional construction methods is that the site has In 1997, the newly formed Treviicos was awarded the not yet been excavated. Traditionally, one might think in contract for the construction of the complex foundation sys- terms of a hole being dug and then a foundation wall being tem of Boston’s new Southeast Expressway, better known as constructed. On this project, the slurry wall will be completthe Big Dig. With the completion of the Big Dig, Treviicos ed, the excavation will begin and the slurry wall will be was able to capitalize on the flourishing Boston economy braced where bracing is necessary. and was intricately involved in the construction of many new see SLURRY page 118 hotels, condominiums and office buildings, as well as med-

What Is a Slurry Wall?

A slurry wall is a system that can provide lateral retention, load-bearing capacity and waterproofing to a foundation while becoming part of the permanent structure. It can be built with zero clearance to existing structures, act as under-pinning of superficial foundations and in conjunction with pre-

founded columns, constitute the perimeter wall in top-down construction projects. Slurry walls are very versatile — they can assume any shape, with thicknesses varying from 2 to 5 ft. and depths of up to 400 ft., and can be constructed in any imaginable soil condition.

Admar Construction Equipment & Supplies 1950 Brighton Henrietta Town Line Road Rochester, NY 14623 585-272-9390 7800 Brewerton Road Cicero, NY 13039 315-433-5000 449 Commerce Rd. Vestal, NY 13850 607-798-0333 1394 Military Road Tonawanda, NY 14217 716-873-8000 2390 Rochester Rd. Canandaigua, NY 14424 585-396-0031 878 Old Albany Shaker Road Latham, NY 12110 518-690-0750 3001 West 17th Street Erie, PA 16505 814-833-7761 121 Armstrong Road Pittston, PA 18640 570-299-5505 www.admarsupply.com

AEI Equipment Services, Inc. 301 East Main Street Tamaqua, PA 18252 888-520-7781 • 570-668-3003 www.aeincservices.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 107

Cap Rents Supply, LLC 18-25 43rd Street Astoria, NY 11105 718-932-4100 Fax: 718-932-8971 www.caprents.com

Gamka Sales Co., Inc. 983 New Durham Rd. Edison, NJ 08817 732-248-1400 Fax: 732-248-1445 www.gamka.com

Iron Source Equipment 25113 Dupont Blvd. Georgetown, DE 19947 302-856-7545 Fax: 302-856-7546 www.ironsourcede.com 5722 N. Dupont Hwy. Smyrna, DE 19977 302-653-7562

Norris Sales Company, Inc. 1010 Conshohocken Rd. Conshohocken, PA 19428 610-279-5777 Fax: 610-279-7973 668 Berlin Cross Keys Road Sicklerville, NJ 08081 856-740-1400 www.NorrisSales.com

Central Equipment Company P.O. Box 261 45 Dempsey-Greaves Lane Stillwater, ME 04489 207-827-6193 Fax: 207-827-3774 54 Old Canal Way Gorham, ME www.centralequipmentco.com

Pump & Power Equipment Corp. 8019 Dorsey Run Rd. Jessup, MD 20794 410-799-1800 Fax: 410-799-1804 www.pumpnpowerequip.com


Page 108 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

JESCO, Inc. 118 St. Nicholas Ave. South Plainfield, NJ 08070 908/753-8080 1790 Route 38 Lumberton, NJ 609/267-2020 1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080 Fax: 973/575-5553 Middletown, DE 302/376-0784

Baltimore, MD 410/687-1700 Delmar, MD 410/546-1090 Frederick, MD 301/874-5500 White Plains, MD 301/870-1438 497 Fishkill Avenue Beacon, NY 12508 845/831-1800 800/724-0725 Fax: 908/821-1671 110 East Jefryn Blvd. Deer Park, NY 11729 844/482-0910

LESLIE EQUIPMENT COMPANY 6248 Webster Road Cowen, WV 26206 304/226-3299 www.lec1.com 136 Clifftop Drive Beaver, WV 25813 304/255-1525 Rt. 33 West Norton, WV 26285 304/636-6421 19 Goff Crossing Drive Cross Lanes, WV 25313 304/204-1818 Fax: 304/204-1811

2098 Lillian Lane Pleasant Valley (Fairmont), WV 26554 304/534-5454 Fax: 304/534-5888 8331 Meade Springer Rd. Ashland, KY 41101 606/928-3477 Fax: 606/928-6845 195 Industrial Park Drive Pikeville, KY 41501 606/432-0321 Fax: 606/432-5918 105 Tennis Center Drive Marietta, OH 45750 740/373-5255 Fax: 740/373-5570

THE W.I.CLARK COMPANY 30 Barnes Industrial Park Rd. Wallingford, CT 203/265-6781 www.wiclark.com Danbury, CT 203/775-1203 Plainfield, CT 860/546-4808


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 109

Jersey Rents www.jerseyrents.com 252 Atlantic City Blvd. Bayville, NJ 08721 732-361-4487 Fax: 732-606-0640 322 Spring Valley Road Old Bridge, NJ 08857 732-591-2088


Page 110 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mecalac Welcomes Dealers, Media to Introduce Machine

In the early phase of production, a model 12MTX begins its journey on the Mecalac assembly line. MACHINE from page 45

ADDED PROTECTIO ON FOR THE MUST TANGS ANGS S IN YOUR ST TABLE ABLE Mustang Compact Skidd Steers and Track Loaders come me standard with the right power needed to tackle the t biggest tasks. Purchase a new Mustang Skid Steer or Track Loader and receive a 2 year / 2,000 hour XPRT total (full machine) extended coverage plan at no additional dditional cost. cost Offer subject to change, change inquire for details.

CALL YO OUR AR REA MUSTA ANG DE EALER TODAY! Y Modern Group Ltd. www.moderngroup.com

2501 Durham Road • Bristol, PA 19007 1-800-866-3376 3480 Board Road • York, PA 17406 1-800-233-9417 112-128 Route 17 North Hasbrouck Heights, NJ 1-800-233-0197 75 New Street • Edison, NJ 08837 1-800-846-5840

Asphalt Paving Equipment &  Supplies, Inc. www.apeasi.com

412 Meco Drive Wilmington, DE 19804 302-683-0105

Penn Equipment

www.pennequipment.biz 100 Windmill Hill Burnham, PA 17009 717-248-8876

26822 Lewes Georgetown Hwy Harbeson, DE 19951 302-664-1552

ww w w. musta n gmf g .c om o

A back blade is skillfully installed.

Every Mecalac machine has all features and aspects of its structure personally inspected at the end of the assembly process. From there, each machine is tested for four hours to check for any manufacturing flaws. According to A.J. Lorusso of Lorusso Heavy Equipment in Mass., “When we deliver a new machine, some customers are thrown off by the fact that every machine has at least four hours on it.”


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 111

EAST PBE, INC. 283 Pane Road Newington, CT 06111 860/665-7470 Fax: 860/665-7478

PINE BUSH EQUIPMENT CO., INC. www.pbeinc.com Pine Bush Office 97 Rt. 302 P.O. Box 106 Pine Bush, NY 12566 845/744-2006 Fax 845/744-2900 Holmes Office www.pbeinc.com 24 Sybil Court Holmes, NY 12531 845/878-4004 Fax 845/878-9626

EDWARD EHRBAR INC. www.ehrbar.com 4 Executive Plaza Yonkers, NY 914/738-5100 Fax: 914/738-6847 601 Coates Ave. Holbrook, NY 11741 631/563-7600 Fax: 631/218-1069 42 Kenosia Ave. Danbury, CT 203/743-0088

MIDLANTIC MACHINERY INC. www.midlanticmachinery.com 2240 Bethlehem Pike Hatfield, PA 19440 215/822-0145 Harrisburg, PA 717/652-3190 Wilkes-Barre, PA 570/824-9891 Baltimore, MD 410/247-2100

Frackville, PA 570/874-6140 28587 Sussex Highway Laurel, DE 19956 302/715-5382

PENN-JERSEY www.pennjerseymachinery.com 333 Cedar Avenue Middlesex, NJ 08846 732/377-4130 1330 Hurfville Rd. Deptford, NJ 08096 856/227-6400


Page 112 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hogan Announces Largest Highway P3 in North America to Relieve Beltway Traffic BELTWAY from page 1

to these key transportation routes. With the total project estimated value at $9 billion, the P3 portion to add four new lanes on both I-495 and I-270 is the largest proposed P3 highway project in North America. The P3 will be seeking private developers to design, build, finance, operate and maintain new lanes on I-495 between the American Legion Bridge and the Woodrow Wilson Bridge and on I-270 between I-495 and I-70. Once completed, the Traffic Relief Plan will deliver new express toll lanes, in addition to existing lanes, on I-495, I-270 and MD 295. “Using innovation and partnering with some of the greatest minds in the world, Maryland is going to finally get some congestion relief by investing $9 billion in three of the most congested highways in the state,” said Rahn. The first step to build new express toll lanes on MD 295 will begin with the transfer of MD 295 from the U.S. Department of the Interior to the Maryland Transportation Authority. Hogan has already personally started this process during a recent meeting with Interior Secretary Ryan Zinke and has directed MDOT officials to move forward with the transfer negotiations. Following the transfer, the Maryland Transportation Authority would then build, operate and maintain the new lanes and maintain existing lanes between Baltimore and Washington, D.C. The Traffic Relief Plan is critical to spurring increased economic developMDOT photo ment and restoring quality of life for countless Marylanders who have been The $9 billion Traffic Relief Plan will reduce congestion for millions of negatively affected by years of traffic drivers and significantly improve the traffic conditions on some of Maryland’s most traveled congestion. roads and highways. Maryland has the secondlongest commuting times in the country, and the National cost was incurred in the Capital Region is the most Baltimore/Washington congested region in the region. nation based on annual delay In making this announceand congestion cost per automent, Hogan has directed commuter. MDOT to issue the Request The statewide cost of confor Information to the P3 gestion based on auto delay, industry and continue the truck delay and wasted fuel transfer process with the and emissions was estimated U.S. Department of the at $2 billion in 2015. This is Interior. an increase of 22 percent (This story also can be MDOT photo found on Construction from the $1.7 billion estimatGov. Larry Hogan announced on Sept. 21 the ed cost of congestion in Maryland administration’s plans to add four new lanes to I-270, Equipment Guide’s website 2013. More than 98 percent the Capital Beltway (I-495) and the Baltimore- at www.constructionequipof the weekday congestion Washington Parkway (MD 295). mentguide.com.)

Harter Equipment Inc. www.harterequipment.com 615 State Route 33 Millstone Twp., NJ 08535 732.446.7600 Highway Equipment Company www.highway-equipment.com 22035 Perry Highway Zelienople (Pittsburgh), PA 724.452.7800 Dubois, PA 15801 814.371.3600 Lorusso Heavy Equipment, LLC www.lhequip.com 160 Elm St. Walpole, MA 02801 508.660.7600 Modern Group Ltd. www.moderngroup.com 2501 Durham Rd. Bristol, PA 19007 800.866.3376 Allentown, PA 18106 610.398.1101 York, PA 17406 800.866.3376 Edison, NJ 08837 800.866.3376 Hasbrouck Heights, NJ 07604 201.288.1441 Seaview Equipment LLC www.seaviewequipment.com 640 Crescent Ave. Bridgeport, CT 06608 203.330.0130 TB Equipment & Rental www.tbequipment.net 892 Odlin Rd. Bangor, ME 04401 207.262.0014 Tracey Road Equipment, Inc. www.traceyroad.com 6803 Manlius Center Rd. East Syracuse, NY 13057 315.437.1471 • 800.872.2390 Adams Center, NY 315.788.0200 • 888.335.0200 Kirkwood, NY 607.775.5010 • 800.370.9488


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 113

Step Inside Y Comfort Zon Because operator convenience is a priority for Hyundai, every Hyundai HX series excavator gives the operator a level of comfort typically reserved f lluxury automobiles. for t bil

All-day comfort starts with the fully adjustab ble, heated air-suspension seat and full-surround d climate control system. You You also get Bluetoot Bluetooth th MP3 radio and hands-free calling, as well as cup holders and a lunchbox storage area.

More standard features. More value.

www.hceamericas.com To learn more To more about the convenie ence features features built into HX series excavators, excavators contact your Hyundai de ealer today. today A Montano Co., Inc. www.amontanoco.com 571 Route 212 Saugerties, NY 12477 845.247.0206

All Island Equipment www.allislandequipment.com 39 Jersey St. West Babylon, NY 11704 631.643.2605

454 Route 13 South Milford, NH 03055 603.673.2640

Chappell Tractor Sales www.chappelltractor.com 251 Route 125 Brentwood, NH 03833 800.616.5666

391 Loudon Road Concord, NH 03301 800.358.6007

George & Swede Sales & Service www.georgeandswede.com 7155 Big Tree Rd. Pavilion (Buffalo/Rochester), NY 14525 585.584.3425

©2017 Hyundai Construction Equipment Americas. All Rights Reserved.


Page 114 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

200 Merrimac Street Woburn, MA 01801

C.N. WOOD CO., INC. Whately, MA

781/935-1919 Johnston, RI

413/665-7009 Avon, MA

401/942-9191 www.cn-wood.com

508/584-8484

18 Blackstrap Road Falmouth, ME 04105

JORDAN EQUIPMENT CO. 207/797-2240 Fax: 207/878-3506 35 Daves Way Hermon, ME 04401

744 Clough Mill Road Pembroke, NH 03275

207/848-9036

www.jordanequipment.com

603/228-3377

2820 Hamilton Blvd. South Plainfield, NJ 07080

KOMATSU NORTHEAST 201 North Route 73 Winslow Township, NJ 08095

908/561-9000

www.komatsune.com

856/767-5900

© 2008 ESCO Corporation.

BusinessCalendar To view our Business Calendar online, go to www.constructionequipmentguide.com. Associated General Contractors of Minnesota AGC of Minnesota SRI and Lifetime Achievement Awards DATE: October 26, 2017 Is there someone you work with who personifies the attributes of Skill, Responsibility and Integrity? Or whose outstanding contributions to the industry over an extensive career might earn them recognition with the Lifetime Achievement award? Nominations are now being accepted for the 2017 SRI and Lifetime Achievement awards, to be presented at a Recognition Dinner being held at the Saint Paul Hotel, Saint Paul, MN 55102 on October 26th. The deadline for submitting nominations is September 5. For more information on this dinner event, please contact Denise Woods at dwoods@agcmn.org or call AGC of MN at 651/6328929. NATIONAL CONSTRUCTION EQUIPMENT MUSEUM 32nd ANNUAL INTERNATIONAL CONVENTION and OLD EQUIPMENT EXPOSITION DATES: NOVEMBER 3 – 5, 2017 PLACE: CARTHAGE, NORTH CAROLINA Directions/Event Address: Hosted by the Ederville Train & Tractor Show, 644 Niagara-Carthage Road, North Carolina, centrally located between Greensboro, Durham, Charlotte, and Fayetteville. For more information, contact: Thomas Berry at 419/352-5616. ICUEE – International Construction & Utility Equipment Exposition DEMO ICUEE EXPO DATES: OCTOBER 3 to 5, 2017 WHERE: Kentucky Exposition Center 937 Phillips Lane Louisville, KY What is ICUEE, The Demo Expo? The International Construction and Utility Equipment Exposition (ICUEE), also known as The Demo Expo, is the premier event for utility professionals and construction contractors to gain comprehensive insight into the latest technologies, innovations, insights, and trends affecting their industry. 950+ Leading Manufacturers: Explore the latest utility products and innovations; Specialized exhibit pavilions for fleet management, safety and green utility. “Test Run” Show Experience! Learn from the Pros! Attend sessions to learn about the latest technologies and issues impacting your business. Ask industry-specific questions to technical experts and equipment designers. Who attends? By job title: 39% Field Operators; 30% Executives; 16% Fleet Managers; 15% Engineers. Contact Us: ICUEE’s customer service team is here to assist you! Monday to Friday – 8:00 AM to 4:00 PM Central time (U.S.A.) United States and Canada: Toll Free: (800) 867-6060. Voicemail and Email messages received after business hours will receive a response the next business day.

Ohio Forestry Association, Inc. Join us at the OFFICIAL PAUL BUNYAN SHOW DATES: OCTOBER 6 – 8, 2017 TIME: 8 AM to 5 PM FRIDAY AND SATURDAY 9 AM to 3 PM SUNDAY PLACE: Guernsey County Fairgrounds 335 Old National Road Old Washington (Cambridge), OH 43768 Wood industry Professionals Free with pre-registration! Show schedule * Activities * Competitors * Exhibitors * Lodging/Dining * Exhibiting Info * Volunteers * Directions - No pets allowed! No unauthorized vehicles, ATV’s or personal golf carts allowed on Show grounds. Mission: The mission of the Paul Bunyan Show is to provide access to current knowledge and technology which enhances the quality of life and market competitiveness of individuals, family, industries and communities. This mission is accomplished by showcasing research, products, services and experience through educational exhibits, presentations, and demonstrations on the forest industries, natural resources and lifestyles. For more information, contact Ohio Forestry Association. Phone: 888/388-7337. Fax: 740/452-2552. Email:info@ohioforest.org. Associated General Contractors of Minnesota (AGC of MN) HR and Training Professionals Conference Registration is now open for the 2017 Construction HR & Training Professionals Conference and pre-conference Strategic Management Workshop, to be held OCTOBER 11-13, 2017 in Phoenix, AZ. AGC of America’s HR/TED Conference provides two days of education and networking for construction industry HR, training, and workforce development professionals. For more information, contact AGC of MN, dwoods@agcmn.org or go to http://www.agcmn.org. PENNDOT TO HOST THREE REGIONAL FORUMS AIMED AT ENGAGING MORE DIVERSE PARTICIPATION IN ROAD AND BRIDGE CONSTRUCTION The sessions are planned for OCTOBER 11, 2017 at Cheyney University, Delaware County; OCTOBER 17, 2017 at the Farm Show in Harrisburg, Dauphin County; and OCTOBER 25, 2017 at Indiana University of Pennsylvania, Indiana County. Hosted by PennDOT, in cooperation with the Associated Pennsylvania Constructors (APC) and Cheyney University Supportive Services, the forums will outline upcoming construction projects and provide technical details on searching for and bidding on those projects. Registration closes on SEPTEMBER 22, and space is limited. For more information, please contact the PennDOT Bureau of Equal Opportunity at 717/787-5891. 6th ANNUAL COST-EFFECTIVE PRODUCED WATER MANAGEMENT INITIATIVE 2017 Rocky Mountains Tight Oil & Shale Gas Plays DATES: OCTOBER 12 to OCTOBER 13, 2017 PLACE: DENVER, COLORADO The premier conference in the Rocky Mountains event calendar, focused specifically on the complete gamut of produced water management issues related to the region, returns to Denver, Colorado this October renamed as the COST-EFFECTIVE PRODUCED WATER MANAGEMENT INITIATIVE 2017. For more information on this conference, contact Alishba Jan, Head of Oil & Gas, American Business Conferences. Phone: 800/721-3915. Email: info@american-business-conferences.com.

Southeastern Equipment Company, Inc. 60th Anniversary Open House Event. CAMBRIDGE, OHIO 10874 East Pike Road OCTOBER 13, 2017 10:00 AM to 2:00 PM; 5:30 PM to 8:30 PM For more information, contact: Southeastern Equipment Co., Inc., 10874 East Pike Road, Cambridge, OH. Phone: 800/798-5438. Missouri Land Improvement Contractors Event: COMPETENT PERSON TRAINING DATE: October 13, 2017 TIME: 1:00 PM to 5:00 PM PLACE: Altorfer CAT 3520 Moberly, Hannibal, MO For more information on the above event, contact Deb Dickens, Executive Director, Missouri LICA State Office, 1101 West High Street, Jefferson City, MO 65109. Telephone: 573/634-3001. Email: MLICA@aol.com. EPA ALLIANCE TRAINING GROUP The Environmental Awareness Bootcamp DATES: October 16 – 20, 2017 PLACE: San Antonio, Texas The Environmental Bootcamp will explore U.S. EPA air, water and waste programs and other environmental issues to help you prepare of what comes next. In addition, the Environmental Awareness Bootcamp will not only explore these regulations but also provide a thorough breakdown of each while providing you with the latest regulatory updates and future projections that could impact your industry. Join us for this important seminar and come and network with environmental professionals from around the U.S. Bring your family and make a vacation out of it! For more information: Phone: 713/703-7016. Web: www.epaalliance.com. EPA ALLIANCE TRAINING GROUP Clean Air Act (CAA) Compliance Workshop DATES: October 17 – 20, 2017 PLACE: San Antonio, Texas Join us for this important seminar and come and network with environmental professionals from around the U.S. Bring your family and make a vacation out of it! For more information: Phone: 713/703-7016. Web: www.epaalliance.com. GIE+EXPO 2017 GREEN INDUSTRY and EQUIPMENT EXPO 2017 DATES: OCTOBER 18, 2017 to OCTOBER 20, 2017 DEALER DAY: OCTOBER 18, 2017 ALL ATTENDEES: OCTOBER 19 – 20, 2017 PLACE: KENTUCKY EXPOSITION CENTER LOUISVILLE, KENTUCKY / USA Green Industry and Equipment Expo is the largest trade show for outdoor power equipment, lawn and garden equipment, light construction and landscape equipment, featuring new products, education and an outdoor demonstration area. The venue of this event is Kentucky Exposition Center, Louisville, Kentucky, USA. The event will be held Wednesday, October 18 to Friday, October 20, 2017. GIE+EXPO 2017 will showcase a wide range of products and services related to agriculture sector from the leading exhibitors such as lawn and garden products, outdoor leisure products, rental lines, outdoor power equipment, design, build, plant care, turf. The approximate number of exhibitors that will exhibit at this event is over 750.

The event will accommodate approximately 500,000 square feet of exhibit space. Over 20,000 visitors are expected at this green industry trade show. Visitor profile of this event includes buyers for municipalities, parks and recreation, design and build pros, distributors, equipment dealers, general contractors, golf course superintendent and equipment managers, grounds managers, interior plantscapers, international importers, irrigation experts, lawn and garden centers, lawn and landscape professionals, merchandisers, buyers, OEM engineers, plant care pros, rental dealers, retailers, turf care experts, trade and national consumer media. The frequency of GIE+EXPO is annual. For more information on this event, contact GIE+EXPO. Phone: 800/5588767; 812/949-9200. Fax: 812/949-9600. Email: info@gieexpo.com. NTEA’s 2017 EXECUTIVE LEADERSHIP SUMMIT EXPLORES WORK TRUCK INDUSTRY DYNAMICS The Association for the Work Truck Industry Held at the Chicago Marriott O’Hare in Chicago, Illinois (NEW LOCATION), this annual event takes place over one and one-half days: Tuesday, October 24 and Wednesday, October 25, 2017. The 2017 program will bring perspective to economic and business trends influencing companies in the work truck industry as subject matter experts share their insights on navigating the future and building a culture of excellence in the process. Visit ntea.com/executivesummit for complete registration, agenda and hotel information. For more information: Telephone NTEA at 800/4416832; Fax: 248/489-8590. OPEN HOUSE!!! MID-COUNTRY MACHINERY, INC. DATE: THURSDAY, OCTOBER 26, 2017 WHERE: MID-COUNTRY MACHINERY, INC. 3478 5th AVENUE, SOUTH FORT DODGE, IA 50501 LUNCH: 11:00 AM to 1:00 PM DINNER/SOCIAL HOUR: 4:00 PM to 8:00 PM DRAWING for RAPTOR TRUCK:7:00 PM For more information, contact Mid-Country Machinery at telephone: 515/574-2302. ASSOCIATED GENERAL CONTRACTORS of MINNESOTA AGC of MN OCTOBER, 2017 PLACE: Bobcat of St. Louis – Columbia 1101 North Lenway, Columbia, MO DATE: OCTOBER 26, 2017 EVENT: RECOGNITION DINNER PLACE: THE SAINT PAUL HOTEL SAINT PAUL, MINNESOTA TIME: 5:00 PM to 8:00 PM For more information, contact Denise Woods, Director – Communications & Events. Telephone: 651/796-2186. Email: dwoods@agcmn.org. Missouri Land Improvement Contractors Event: MLICA BOARD OF DIRECTORS and COMMITTEE MEETINGS DATE: October 28, 2017 PLACE: Bobcat of St. Louis – Columbia 1101 North Lenway, Columbia, MO For more information on the above event, contact Deb Dickens, Executive Director, Missouri LICA State Office, 1101 West High Street, Jefferson City, MO 65109. Telephone: 573/634-3001. Email: MLICA@aol.com.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 115

Big reassons to rent the e compact excavator avator leader*. Kubotta KX018-

Superior bucket breakout force. Excellentt digging depth. Spacious cab. The reasons to rent Kubota’s KX018-4 co ompact excavator add up quickly — especially ally when you include friendly, knowledgeable seervice from your local Kubota Orange Rental deaaler. Stop in today and turn your rental reasons in nto real results.

Abele Tractor & Equipment Co., Inc. www.abeletractor.com

Albany, NY 12205 518/438-4444

www.cherryvalleytractor.com

Cherry Valley Tractor Marlton, NJ 08053 856/983-0111

ADMAR Construction Equipment & Supplies www.admarsupply.com

Vestal, NY 13850 607/798-0333 Tonawanda, NY 14217 716/873-8000 Canandaigua, NY 14424 585/396-0031

Rochester, NY 14623 585/272-9390 Cicero, NY 13039 315/433-5000

Eagle Power & Equipment Company www.EaglePE.com

www.farm-rite.com

Farm-Rite Inc.

www.harterequipment.com

Harter Equipment, Inc

Shiloh, NJ 08353 Millstone Twp, NJ 08535 Eagle, PA 19480 800/752-6373 • 856/451-1368 732/446-7600 610/458-7054 1-888-HARTER-1 Calverton, NY 11933 631/284-3127 Erb & Henry Equip., Inc. Marshall Machinery, Inc. www.erbhenry.com www.marshall-machinery.com F&W Equipment www.fwequip.com New Berlinville, PA 19545 Honesdale, PA 18431 610/367-2169 570/729-7117 Orange, CT 06477 203/795-0591

www.wtractor.com

Westchester Tractor Inc. Brewster, NY 10509 845/278-7766 Fax: 845/278-4431

www.chappelltractor.com

Chappell Tractor Sales 454 Route 13 South P.O. Box 424 Milford, NH 03055 603/673-2640 Fax: 603/672-0019

www.ableequipment.com

ABLE Equipment Rental Deer Park, NY 11729 866/468-2666 631/841-3333


Page 116 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bridge Rehabilitation on Schedule for November Completion BRIDGE from page 1

The Andy Warhol Bridge was the first self-anchored

suspension bridge in United States. replacing the 1884 Gustav Lindenthal Suspension Bridge, as mandated by the 1889 River and Harbor Act. It was the first selfanchored suspension bridge in United States, and construction began with wood pile driving in 1925 by American Bridge Company. Rivets and built-up plates also were used in the construction. The project began on Aug. 8, 2016, and is currently on schedule to be complete by Nov. 17, 2017. The contract was awarded to Brayman Construction, Saxonburg, Pa., with Kevin Meade serving as the project manager. The initial value of the project was $25,391,749.45, and the current value is reportedly $25,416,849.29. Funding comes from federal, state, and county sources. The contract includes the following: provided daily updates on • Deck replacement; clearance height when • Total repainting of the river levels changed.” superstructure in Aztec Downs noted that the gold; bridge has numerous areas • Steel repairs (fascia that have tight access connections, floor beam clearances. The first area connections, stiffening is inside the stiffening girder, sidewalk brackets, girders, which have signifand tower repairs); icant deterioration due to • Installing sloped plate water and road salt enterand curb to keep moisture ing via the curb plate from accumulating along along the roadway. This existing stiffening girder; curb plate was removed to • Installing new bridge allow easier access, and a lighting to match original new sloped curb plate with light fixtures; waterproof access hatches • Repairing buckle is being installed to miniplates, refurbishing susmize the amount of standpension tower bearings, ing water that may enter replacing existing bearthe stiffening girder. ings/tie-down linkages at Another reported tight Piers 1 and 4; area is inside the two tow• Repairing river pier ers. Each tower consists of footings and installing two built-up H sections 4scour protection; ft. deep. The exposed ends • Replacing expansion of the tower have nondams with neoprene strip structural cover plates that seal dams; have limited access open• Pointing masonry ings. The painting contracjoints in piers; • Repairing/replacing The project began on Aug. 8, 2016, and is currently on The initial value of the project was $25,391,749.45, and tor used specialized blastutility conduits and brac- schedule to be complete by Nov. 17, 2017. the current value is reportedly $25,416,849.29. Funding ing nozzles and spray heads to successfully pering; comes from federal, state and county sources. form this work without • Installing new scuppers and downspout- tions of Allegheny County. entering this confined “This platform had to be low enough to ing; • Installing approach slabs and milling allow access beneath the stiffening girders tion. Following several meetings with the space. “Keeping the bridge to current code and overlaying existing roadway approach; but high enough to allow access to the Coast Guard, the contractor received numerous repairs to stringers and floor- approval to provide 39-ft. of clearance by requires some innovative solutions, especialand adding additional support points to the work ly when the bridge has undergone several • Converting bridge from four-lane sec- beams. “The main problem occurred in the 180- platform and by modifying his vacuuming past rehabs,” Downs said. “Maintaining the tion to three-lane section “The first challenge was to erect a work ft. wide navigation channel beneath procedures for spent abrasive blast material historical nature of the structure also requires platform beneath the bridge to allow access midspan. The U.S. Coast Guard and to minimize dead load sag. Notifications items such as tension control bolts to mimic to perform painting and steel repairs,” said Waterways Association required 40-ft. were issued to river traffic and the contractor see BRIDGE page 122 Aimie M. Downs, director of communica- height clearance above normal pool eleva- monitored marine radio communication and


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 117


Page 118 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Crews Build Slurry Wall Foundation Before Beginning Site Excavation SLURRY from page 106

Construction of the slurry wall has already started, but the excavation of the site has not yet begun.

Before construction of the actual slurry wall begins a concrete guide wall is laid out and built. Upon completion of the guide wall, excavation for the slurry wall begins. Massive clamshell buckets, which are controlled by very specialized cranes, start excavating the dirt and stone between the areas outlined by the guide wall. The excavation at times will reach depths up to 90 ft. A crane-operated clamshell bucket is used to excavate material within the boundaries of the guide wall. At times, rock is encountered during the excavating process that cannot be removed using the clamshell bucket. In this scenario, crane-operated grinders, which are capable of breaking up even the hardest New England granite, are dropped into the hole. Once the foundation has been excavated, slurry composed primarily of water and Bentonite is pumped into the hole. This mixture helps maintain the integrity of the walls of the hole until concrete is poured. With the slurry in place, 22-ft. wide steel panels manufactured from reinforced steel, which resemble a rebar cage in design, are lowered into the foundation and are sealed together. Each panel weighs between 30,000 and 75,000 lbs.. Once the panel walls are in place and have been sealed together, cranes are used to place concrete funnels that are as long as the depth of the dig into the hole so that concrete can be poured. Once the concrete is poured into place at the bottom of the

PENN JERSEY MACHINERY www.pennjerseymachinery.com 333 Cedar Avenue • Middlesex, NJ 08846 732/377-4130

MEDICO INDUSTRIES, INC. www.medicoind.com 3647 Shafer’s Schoolhouse Rd. Stroud Township, PA 18360 570/420-0877 1500 Highway 315 Wilkes-Barre, PA 18702 800/633-0027

CHAPPELL TRACTOR www.chappelltractor.com 454 Route 13 South • Milford, NH 03055 603/673-2640 251 Route 125 • Brentwood, NH 03833 800/616-5666 391 Loudon Road • Concord, NH 03301 800/358-6007

see SLURRY page 120

This photo shows a section of the concrete guide wall, which lays out for the equipment operators exactly where the slurry wall will be constructed.

ALL ISLAND EQUIPMENT www.allislandequipment.com 39 Jersey Street • West Babylon, NY 11704 631/643-2605

When dictated by rocky conditions, grinders such as this are lowered into the hole to remove the obstacle.

A crane-operated clamshell bucket is used to excavate material within the boundaries of the guide wall.

Steel workers custom fabricating one of the 22-ft.-long steel panels, which will be dropped into the excavated hole prior to concrete pumping.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 119

Pr o s K Pro Kno no ow w! w !

®

Thos se in the kn know ow, know o kno ow T Takeuchi akeuc eu uc chi ch

Tough, To oough ugh, PPow oow weerffuull,, Dependab w wer ependabble le 520-0877

GROFF TRACTOR & EQUIPMENT INC www.GroffTractor.com Cranberry Township, PA 724/898-1535 Ebensburg, PA 814/472-7300 Ephrata, PA 717/738-0220

Mechanicsburg, PA 717/766-7671 New Stanton, PA 724/755-0124 State College, PA 814/353-8400

Greenwood, DE 19950 800/756-9433 Aberdeen, MD 21001 410/575-6580 Baltimore, MD 21227 410/247-7454

Frederick, MD 21704 301/682-4441 Upper Marlboro, MD 20772 301/627-3938

NORRIS SALES COMPANY www.norrissales.com 1010 Conshohocken Road • Conshohocken, PA 19428 610/279-5777 668 Berlin Cross Keys Road, Sicklerville, NJ 08081 856/740-1400

< Find out what others know, visit takeuchi-u us.com for more info >


Page 120 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Crew Requires Wide Variety of Cranes for Slurry Wall Construction Project

MILTON CAT www.miltoncat.com Contractor and recycling customers in ME, RI, VT, NH, MA and state of NY , excluding New York City and surrounding counties 100 Quarry Drive Milford, MA 01757 508-634-3400 14 Kendrick Road Wareham Industrial Park Wareham, MA 02571 508-291-1200 84 Concord Street North Reading, MA 01864 978-276-2400 2158 Plainfield Pike Commerce Park W #10 Cranston, RI 02920 401-946-6350

A view of one of the completed 22-ft. rebar panels. A concrete funnel being lowered into place. The concrete is being added to the hole through the funnel in the forefront of this photo. The back of the photo shows the slurry mix being pumped out of the excavated area to the screening and separating station.

Route 2, One Cat Lane Richmond, VT 05477 802-434-4228 30 Industrial Drive Londonderry, NH 03053 603-665-4500

16 Pleasant Hill Road Scarborough, ME 04070 207-883-9586 79 Robertson Blvd. Brewer, ME 04412 207-989-1890 500 Commerce Drive Clifton Park, NY 12065 518-877-8000 294 Ainsley Drive Syracuse, NY 13210 315-476-9981 55 Industrial Park Drive Binghamton, NY 13904 607-772-6500 4610 E. Saile Drive Batavia, NY 14020 585-815-6200

H.O. PENN MACHINERY CO., INC. www.hopenn.com Contractor and recycling customers in lower thirteen counties of NY state, and in the state of CT

The aggregate separated from the slurry is then stockpiled and dried.

SLURRY from page 118

hole the lighter slurry mixture of water and Bentonite displaces to the top of the hole and the slurry is pumped to a screening and separation area. Heavy Lifting The construction of a slurry wall is crane intensive work. According to Jeffrey Taylor, senior project manager of Treviicos, “The cranes on our projects are our life blood. Cranes are involved in nearly everything that we do. No single crane manufacturer builds the full variety of cranes that are needed on one of our projects.” The cranes that Treviicos uses for the lifting of the clamshell buckets and diggers are duty cycle cranes manufactured by Liebherr that the company has modified for its specific application. For the hoisting of the rebar cages into the excavated holes and doing general pick and carries around the site such as unloading rebar, Treviicos selected a

Mantis 15010 77-ton hydraulic boom crawler crane from Empire Crane headquartered in Syracuse, N.Y. “[The Mantis 15010] perfectly fits the specs we are looking for in this application. It offers tremendous stability and the best maneuverability possible in this application. It has 111 feet of boom, which is all hydraulic. We had previous experience with the use of this crane on a major casino project that we were involved in that contained very tight quarters. With no outriggers, the machine reaches its full capacity in a very small footprint,” Taylor said. “We have worked with Empire Crane for several years and one of the things that we look for in any vendor is service and support. We are doing severe duty work in all types of weather conditions and Empire Crane as well as their sales representative Justin Melvin has come through for us under many difficult circumstances. Their mechanics are top notch and they respond to our needs immediately.” For more information about Treviicos, visit www.treviicos.com. For more information about Empire Crane, visit www.empirecrane.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

122 Noxon Road Poughkeepsie, NY 12603 845-452-1200 699 Brush Avenue Bronx, NY 10465 718-863-3800 783 Bloomingburg Road Bloomingburg, NY 12721 845-733-6400 660 Union Avenue Holtsville, NY 11742 631-758-7500 225 Richard Street Newington, CT 06111 860-666-8401 Contact our Aggregate Specialists In CT call Scott Gilligan 860-461-6534 In NY state call Kevin Kretschmer 646-315-2284


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 121

MELLOTT COMPANY www.mellottcompany.com Aggregates, quarry, contractor & recycling customers in MD, VA, WV, DE, and NC. Aggregates and quarry customers in NJ and NY, excluding New York City and surrounding counties. 100 Mellott Drive Warfordsburg, PA 17267

4501 Green Point Drive Greensboro, NC 27410

Lokotrack® ST2.8™ exceeds expectations in making a clean cement additive That’s how we make the big difference, the Metso Way.

541 Farmview Lane Mount Joy, PA 17552

800-634-5634

FOLEY, INC. www.foleyinc.com Contractor and recycling customers in the state of NJ 855 Centennial Avenue Piscataway, NJ 08855 info@foleyinc.com

732-885-5555

A Lokotrack ST2.8 mobile scalping screen is helping a cement plant produce a clean additive for its production process, resulting in significant cost savings. The operator is saving up to $20 a ton by producing the additive using the ST2.8, rather than buying it from an outside source. The Lokotrack ST2.8 has a larger throw than most machines in its size class, which allows it to produce a cleaner end product. The unit’s powerful Caterpillar C4.4 diesel engine meets the latest emissions standards, and a new hydraulic system helps to reduce fuel consumption. Find out more about profitable mobile screening at metso.com/showroom/aggregates #TheMetsoWay

WHITNEY & SON, INC. www.whitneyandson.com Aggregates and quarry customers in CT, MA, ME, NH, RI, & VT 95 Kelley Ave. Fitchburg, MA 01420

800-245-5472 978-343-6353 info@whitneyandson.com

CB

Con-Agg

CB CON-AGG www.cbconagg.com Aggregates, quarry, contractor and recycling customers in the state of PA 5300 Paxton Street Harrisburg, PA 17111 717-564-2121

4565 William Penn Hwy. Murrysville, PA 724-327-1300

Old Town Rd & Rte. 879 Clearfield, PA 814-765-1611

168 Industrial Park Road

11 Progress Drive Cranberry Twp., PA 724-776-7660

2955 Stewart Drive State College, PA 814-237-8338

3950 Depot Road Erie, PA 814-898-3388

Rt. 54 & I 180 (Exit 5) Turboville, PA 570-538-2551

1500 S. Altamont Blvd. Frackville, PA 570-874-3560

Wilkes-Barre Twp. Blvd. Wilkes-Barre, PA 570-822-8141

145 Rose St. Indiana, PA 724-463-8743

4326 Oregon Pike Lancaster, PA 717-859-4905

3105 Route 219 Lantz Corners, PA 814-778-5250

309 Foothills Lane Mount Pleasant, PA 724-696-4080

US Rt. 6 East Mansfield, PA 570-662-7171

441 Route 315 Hwy. Pittston, PA 570-883-1044

Somerset, PA 814-445-7915


Page 122 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Crews Update First of Three Bridges on Pittsburgh Project BRIDGE from page 116

:KHUH :RXOG <<R RX *ULQG" Peterson custom mers operate their machines hines in the most demandingg work sites in the world! d! When you are this far out, you need to know that you have the most reliable, toughe est machine possible.

Barry Equipment Covering New England & Eastern NY (508) 949-0005

Just one look at a Peterson can show yoou why we build the most innovative grinders in the he market. For thirty years, Petterson’s attention to detail tail and drive to build the highhest quality, highest volume lume producing machines make a Peterson a sure investment. Want to see wha at a Peterson Horizontal Grinder can do? Give us a caall at 800.269.6520 or visit us at www.petersoncoorp.com.

Cleveland Brothers Covering Pennsylvania & West Virginia (814) 237-5132 ext. 5101

Groff Tractor New Jersey, LLC Covering Southern New Jersey (877) 874-2624 www.grofftractor.com

Scan this QR code with your smartphone to learn more about Peterson (you ca an download a free reader from you ur phone's app store).

800-269-6520 800 269 6520 • www.petersoncorp.com www..petersoncorp.com • PO BOX X 40490 • Eugene, OR 97404

rivets and placement of caulking to reduce water infiltration through multiple plies of steel plates.” Downs noted that since this project is the first of three sister bridges that will be rehabilitated, consideration must be given to how any repair decision will affect the remaining two bridges. The Warhol Bridge and its two sister bridges are selfanchored suspension bridges. Downs noted this places the two longitudinal stiffening girders in compression and requires unique bearings at the ends of both girders. “These unique bearings consist of an articulated arm that is pin connected to the stiffening girder and to an eye-bar anchorage system,” she said. “This configuration allows for thermal expansion/contraction of the bridge while resisting any vertical downward or uplift loads which are induced by traffic live loads on the bridge deck.” The project is replacing all four bearings with new bearing assemblies that will have rock anchors to increase the tiedown capacity. This work also requires temporary support at the bearings, and the contractor developed an innovative method to utilize the new permanent anchors to provide temporary tie-down capacity before being transferred into permanent condition. A unique aspect of the bridge noted by Downs is that the south tower is on roller pins that allow the tower to move as the entire bridge expands or contracts to temperature changes. These roller pins are contained in a grease box at the base of the tower. The grease will be removed and the roller pins steam cleaned. After the pins have been inspected, a new grease box will be installed and new grease added to ensure that the bridge can continue to properly adjust to temperature changes. Major subcontractors for the project include Advantage Steel and Construction; Southern Road and Bridge; Power Contracting Co.; Steel Core Construction Inc.; and Specialty Water Services. Major equipment used on the job for abrasive blasting of existing structural steel includes an ARS DC45 45,000 cfm dust collector; an ARS 54 recycling unit; and an ARS 56 recycling unit. Equipment for bridge deck removal includes a Cat 336E L hydraulic excavator with slab crab bucket and a Cat 262 skid steer loader. For structural steel repairs, equipment includes a Shuttlelift CD 3300 8.5 ton carry deck (crane) and a Genie GTH-B44 telehandler. The project includes 222,000 lbs. of epoxy coated reinforcing steel; more than 200 tons of repair steel; and 1,371 cu. yds. of deck concrete. The Rachel Carson Bridge will be next in the process, taking about two years to complete, and the Roberto Clemente Bridge will be last, expected to be finished in 2021. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 123

EXTRA SKID AND A TRACK LOAD DER COVERAGE C COMES ST TANDARD ANDARD D Since 1973, Gehl has pushed skid loader der innovation forward.. T Today oday, Gehl continues es the tradition with a complete line of skid d loaders and track loaders aders designed with productivity and e effficiency ficiency in mind. Purc Purchase chase a new Gehl Skid d or Track Loader and d receive an include ed 2 year / 2,000 hr XP PRT total (full machine) e) extended coverage plan. Offfer fer subject to cchange, hange, inquire for deta details. ails.

CALL YOUR O LOCA AL GEHL D DEALER TODA O Y! Y ADMAR CONSTRUCTION EQUIPMENT & SUPPLIES sales@admarsupply.com www.admarsupply.com 878 Old Albany Shaker Road Latham, NY 12110 518/690-0750

2390 Rochester Road Canandaigua, NY 14424 585/396-0031

7800 Brewerton Road Cicero, NY 13039 315/433-5000

449 Commerce Road Vestal, NY 13850 607/798-0333

3001 West 17th Street Erie, PA 16505 814/833-7761

121 Armstrong Road Pittston, PA 18640 570/299-5505

1394 Military Road Tonawanda, NY 14217 716/873-8000

1950 Brighton Henrietta Town Line Road Rochester, NY 14623 585/272-9390

NORRIS SALES COMPANY www.NorrisSales.com 1010 Conshohocken Rd. Conshohocken, PA 19428 610/279-5777 1-800/457-RENT (7368) 668 Berlin Cross Keys Road Sicklerville, NJ 08081 856/740-1400 866/80-TOOLS (86657)

MIDLANTIC MACHINERY www.midlanticmachinery.com 2240 Bethlehem Pike 6 S. Eleanor Ave. Hatfield, PA 19440 Frackville, PA 17931 215/822-0145 570/874-6140 6375 Allentown Blvd. Harrisburg, PA 17112 717/652-3190

1400 Joh Avenue Baltimore, MD 21227 410/247-2100

1261 Highway 315 Wilkes Barre, PA 18702 570/824-9891

28587 Sussex Hwy. Laurel, DE 19956 302/715-5382

ALL ISLAND EQUIPMENT www.allislandequipment.com 39 Jersey Street West Babylon, NY 11704 631-643-2605

www w.gehl.com


Page 124 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE


Pages 125-129

Snow and Ice Section For more information on snow-clearing equipment and spreaders, visit CEG's Web site at www.constructionequipmentguide.com.

Boon & Sons Chooses SDLG for Upstate N.Y. Snow Removal Boon & Sons has been offering snow removal services to residents in upstate New York for more than 20 years. Located mere mi. from the city of Rochester, where average snowfalls approach 100 in. per year on a regular basis, the company is more than familiar with tough winters and the equipment needed to deal with their effects. The North Chili, N.Y.-based company has made a name for itself by handling some of the most daunting snow removal sites in the region, including the 1,400-acre campus of the Rochester Institute of Technology (RIT). Because of the seasonal nature of snow removal, Boon & Sons knew it didn’t need premium wheel loaders that would sit idle for most of the year, especially since the electronics found on higher-end loaders leaves them vulnerable to salt damage. With these factors in mind, the company decided to add four SDLG loaders to its fleet in October of 2016: two L938Fs and two L948Fs. “We had good luck with our SDLG loaders through the winter of 2017,” said Daniel Boon, president of Boon & Sons. “We service a 30-mile radius around the Greater Rochester area, plowing Class A office parks, a few shopping malls and the campus of RIT, which is one of our largest customers. When the snow starts falling, we work around the clock until it stops so we can clear it — it’s tough work, and these SDLG loaders hold up to the task.” Boon also cited the value proposition of SDLG as a reason for making his decision. “Value was a major factor in choosing SDLG,” he said. “We saved nearly 30 percent on what we would have spent on a competitor’s wheel loaders. And SDLG’s leaseto-buy agreement was very competitive as well. When you combine that with the low cost of maintenance for these machines, the money we saved is considerable.”

Boon & Sons added four SDLG loaders to its fleet in October of 2016: two L938Fs and two L948Fs.

The 2.5 cu. yd. (1.9 cu m) capacity L938F has an operating weight of 27,560 lbs. (12,501 kg). The L948F has a 3.0 cu. yd. (2.3 cu m) capacity and an operating weight of 32,010 lbs. (14,519 kg). Both feature a Tier IV Final Deutz engine with 171 hp and 627 lb.ft of torque; ZF powershift transmission; air-cooled, dry-disc brakes; a hydraulic quick coupler and third-function hydraulics; a modern fit and finish with high visibility; and an operator-friendly cab. They both come with a 12-month, 2,000-hour warranty, which many owners consider when choosing to buy an SDLG over a premium, auction machine. “In this business, if you get machines that are too heavy, you run the risk of breaking pavement,” Boon said. “So the operating

weight of our SDLG fleet is ideal for the snow removal work that most often happens on roadways and parking lots. The cabs on these machines are great, too. When nor’easters hit and we have to run the loaders for two or three days straight, comfort makes a difference.” Boon & Sons has been so impressed with its SDLG loaders that the company is considering the purchase of an L918F, a new compact loader that launched at ConExpo 2017. The company will again work with SDLG dealer Vantage Equipment, which has provided Boon & Sons with its entire SDLG fleet. “We’ve been pleased with Vantage,” Boon said. “The service has been very good. We ordered our first two loaders and they

arrived within a week. We decided after the fact that we needed more, and the two additional loaders arrived shortly after that. Vantage did a great job of getting them to us.” Vantage Equipment was founded in 2005. The company operates from three New York locations, including Batavia, Albany and its headquarters in Syracuse. Boon & Sons was founded in 1991 to provide landscaping and snow removal services to the Greater Rochester area. The company has since added trash collection to its range of services and now serves Western New York with a fleet of biodiesel trucks. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)


Page 126 • October 4, 2017 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

UPCOMING SPECIAL SECTIONS ISSUE

22

Crawler Loaders, Dozers Ad Closing Date Publishing Date

ISSUE

24

Trailers Ad Closing Date Publishing Date

ISSUE

26 2 4

December 18, 2017 December 27, 2017

Auction Profiles Ad Closing Date Publishing Date

ISSUE

November 17, 2017 November 29, 2017

Compact Equipment Ad Closing Date Publishing Date

ISSUE

October 23, 2017 November 1, 2017

January 15, 2018 January 24, 2018

Excavators Ad Closing Date Publishing Date

February 12, 2018 February 21, 2018


Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 4, 2017 • Page 127

LOWER COST.

Reliable performance isn’t expensive to build. We’ve been proving that for decades. SDLG wheel loaders give you exactly what you need — simple operation and easy upkeep at the lowest prices in the industry. If you own an SDLG, you already know this. If you don’t, it’s time you did. Click or call to find your local dealer and ask about our Snow Program Specials. * Prices are subject to change without notice. Visit sdlgna.com/snow for details.

L918F

L938F

3

1.0 yd / 74 hp

$54,500

*

L948F

3

2.5 yd / 171 hp

$104,500

LG958L

3

3.0 yd / 184 hp

*

$119,500

LG959

3

*

$137,500

844-TRY-SDLG

4.0 yd 3 / 241 hp

4.0 yd / 241 hp

*

$147,500

844-879-7354

*

sdlgna.com/snow

Chadwick-BaRoss Inc.

Highway Equipment & Supply Co.

Malvese Equipment Co. Inc.

Vantage Equipment LLC

Woodco Machinery Inc.

Bangor, ME 207.942.4838 Caribou, ME 207.498.2547 Westbrook, ME 207.854.8411 Concord, NH 603.224.4063

Drums, PA 570.788.1127 Ephrata, PA 717.859.3132 Harrisburg, PA 717.564.3031 Lock Haven, PA 570.769.1070

Hicksville, NY 516.681.7600 Riverhead, NY 631.369.1147

Batavia, NY 585.344.1931 Latham, NY 518.220.9500 Syracuse, NY 315.437.2611

Avon, MA 508.584.8484 Wobum, MA 781.935.3377 Johnston, RI 401.942.9191

vanquip.com

woodcomachinery.com

chadwick-baross.com

hwyequip.com

Tyler Equipment Corporation

malveseequipment.com

Wood’s CRW Corp.

Berlin, CT 860.356.0840 E. Longmeadow, MA 413.525.6351

Williston, VT 802.658.1700

tylerequipment.com

woodscrw.com


Page 128 • October 4, 2017 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

SnowWolf Introduces Newly Redesigned ProPlowFX SnowWolf has introduced its newly redesigned ProPlowFX, an all-purpose plow that works equally well for snow removal and light dirt moving or landscaping, according to the manufacturer. The versatility of the Burnsville, Minn.based company’s new attachment is made possible by a semi-floating torsion system that provides infinitely variable down pressure and shock absorption, a trip-lock-out feature and a shorter blade-to-machine distance for greater maneuverability. The ProPlowFX also features automatic oscillation, which is an improvement over the previous design. It allows the attachment to rise or fall up to 5 in. (12.7 cm) on either end so the plow follows the contours of the surface being plowed and scrapes it clean. In addition, SnowWolf resized the blade to make the ProPlowFX ideal for smaller skid steers and compact tractors. The attachment is designed for use with machines that weigh up to 8,000 lbs. (3,628 kg), and it is available in 5-, 6-, 7- and 8-ft. (1.5, 1.8, 2.1 and 2.4 m) lengths. “The new ProPlowFX is the best all-purpose blade you can buy,” said SnowWolf President and Product Development Manager Jerry Holman. “It’s perfect for people who want a really good snowplow that’s

just as good for moving dirt, filling holes and light grading year-round.” Semi-Floating Design Holman said that nothing like the ProPlowFX’s torsion system has ever been used before in snow removal attachments. The greatest benefit of the semi-floating torsion system, he said, is that it allows the operator to apply variable down pressure from zero to full down pressure on the blade. When an operator rolls the attachment plate forward or backward, the system either exerts down pressure or releases pressure from the blade’s cutting edge. The farther forward an operator rotates the attachment plate, the more down pressure he exerts on the blade’s edge. Eventually the system gets so stiff that it applies full down pressure and the skid steer’s wheels lift off of the ground. To ease pressure, the operator rotates the attachment plate back toward the skid steer or tractor. The torsion system also flexes to provide cushioning in the event of an obstacle strike while plowing snow or moving other material. Finally, the system provides built-in shock absorption when traveling between projects. Rather than bouncing metal to metal on a

solid or chain lift mechanism, which are common in other attachments, the ProPlowFX’s weight rests on the torsion system. If an operator hits a pothole, for example, the plow will be cushioned and bounce slightly rather than delivering a jolt to the operator and machine. Trip Lock Out A plow’s trip feature is essential when plowing snow because there are often obstacles hidden under the snow. The trip edge protects the operator and the machine by minimizing or completely alleviating the force the jolt. However, when moving dirt or other materials, the trip function can hinder the plow’s efficiency or even make it impossible to complete the job because the blade will trip every time it encounters an obstacle or there is too much weight from material in front of the plow. The redesigned ProPlowFX allows an operator to lock the trip mechanism simply by adding two bolts between the blade and the quadrant interface. Holman said the redesign came in response to suggestions from customers in southern areas of the United States. “It only snows three times a year at best in some of those states,” he said. “People wanted to use the ProPlowFX at other times for filling in holes on gravel driveways, spreading black dirt or grading, but that wasn’t possible because the blade tripped all the time. We fixed that with stronger implements and the trip-lock-out system.” The ProPlowFX also allows the operator to adjust the tension on the trip mechanism. It comes standard with two springs, and customers can request two additional springs. This gives the operator three options — zero trip with the lock-out system, easy-full trip with the two-spring configuration and medium-full trip with four springs. When an operator encounters an obstacle in either of the full-trip modes, the entire blade tips forward and engages the extension springs between the quadrant and the moldboard. After the obstacle has been cleared, the springs return the blade to its normal position. More Compact, More Efficient Many compact tractors have mounting plates that are far away from the front of the tires, as much as 3 ft. (.9 m) in some cases. When a long attachment is added to the front, it adds tension to the machine’s components and affects the tractor’s maneuverability. SnowWolf designed the ProPlowFX with compact tractors in mind by shortening the distance from the cutting edge to the back of the attachment, making it 9-1/4 in. (23.5 cm) shorter than the previous version. The

A semi-floating torsion system in the completely redesigned ProPlowFX provides infinitely variable down pressure and shock absorption. By coupling it with a trip-lock-out feature, SnowWolf has created an all-purpose attachment for year-round snow removal, dirt work and light landscaping.

adjustment makes for a tighter turn radius, provides better overall maneuverability and reduces stress on the tractor’s components, according to the manufacturer. SnowWolf also reduced the height of the blade by 2-1/2 in. (6.3 cm), from 30 in. (76.2 cm) tall to 27-1/2 in. (70 cm). Holman said the ProPlowFX is “better sized” for small skid steers and compact tractors and it’s easier for an operator to see over the top. “It’s a bit more compact, but it hasn’t lost any strength compared to the previous design,” he said. SnowWolf Standards The ProPlowFX also incorporates many standard SnowWolf plow features. For example, the moldboard has an aggressive curvature to enable “live” snow rolling for exceptional efficiency, and the plow angles 35 degrees, which is more than the standard 25- to 30-degree angle of other plows. The combination of the optimized curvature and greater angling enhance performance so an operator can plow snow much faster with less trail off on the leading edge of the blade when angle plowing. The ProPlowFX is backed by a two-year warranty. For more information, call 800/905-2265 or visit snowwolfplows.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)


Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 4, 2017 • Page 129

PROFITABILITY

n e v i r D

Tri Tank Corp 115 Farrell Road Syracuse, NY 13209 315-451-8663 F 315-453-0826 TRIP-EDGE

C-PLOWS

Torsion-Trip V-Plow TRIP-EDGE

No matter what the conditions, Hiniker professional grade snowplows are ready to help you reach new levels of productivity and performance!

SCOOP PLOWS

V-PLOWS: Trip-edge designs give smooth operation and effective protection. Double acting cylinders provide positive moldboard position control.

FULL-TRIP

CONVENTIONAL PLOWS

TRIP-EDGE

C-PLOWS: Get the heavy-duty performance of the Hiniker trip-edge conventional plow plus the added versatility of a high performance backdrag plow. An amazing time-saver in driveways, parking lots and loading docks.

White’s Farm Supply, Inc. www.whitesfarmsupply.com 4154 State Route 31 Canastota, NY 13032 315-697-2214 962 State Route 12 Waterville, NY 13480 315-841-4181

SCOOP PLOWS: High capacity concave shape captures snow to efficiently clear large lots and parking areas. Angles left or right for conventional plowing.

8207 State Route 26 Lowville, NY 13367 315-376-0300

CONVENTIONAL PLOWS: 30 inch tall high-curvature blades roll deep snow off quickly and efficiently. Commercial plowers will appreciate the extra strength and efficient design.

387 Center Street Franklin, NY 13775 607-829-2600

CONVENTIONAL PLOWS

SPREADERS: Spread ice control materials quickly and easily with an efficient Hiniker Spreader. Long-lasting stainless steel construction. Choose between OHV gas engine or dual-motor electric hopper spreaders, or new stainless steel tailgate spreader models! TAILGATE SPREADERS

HINIKER COMPANY 1-800-433-5620 s www.hiniker.com

1205 State Route 40 Schaghticoke, NY 12154 518-753-2237


Page 130 • October 4, 2017 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide

Since

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

www.RBusedParts.com CALL EARLY HUGHES TODAY! (888) 288-1052 ehughes@roadbuildersmachinery.com

PUMP REBUILDS ALL MAKES & MODELS OF MACHINES SAVE UP TO 60%

• Full-Service Hydraulic Repair • Turnkey Hydraulic Systems • Hydraulic System Integration • Professional Field Service • Full Machine Shop • Hard Chrome Plating • Large Seal Inventory

Call Ken or Marc 716/681-8474 Fax: 716/681-8514 4474 Walden Avenue Lancaster, NY 14086 sales@fluidpowerservice.com

ONE YEAR WARRANTY CYLINDER REPAIR EXCHANGE

www.fluidpowerservice.com

Get the latest news online.

Visit CEG’s Web Site at www.construction equipmentguide.com

1985!

UConn Students Return to Find Major Construction on Campus STORRS, CONN. (AP) Thousands of University of Connecticut students returned to campus to find some major road construction and traffic problems. About 19,300 undergraduate and graduate students started classes on Aug. 28 in Storrs and 12,400 moved into the dormitories. The school was unable to complete scheduled road construction this summer, leaving one entrance to campus closed and several roads with altered or one-way traffic patterns. The school said the construction is part of

a multi-year project necessary to replace aging pipes and other underground infrastructure. Students were emailed directions on how to get where they are going, and the school is asking them not to rely on GPS devices, which don’t show the construction. Other motorists are being asked to avoid the area. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Keep Up With All the Industry News Subscribe to

Construction Equipment Guide Today! Toll Free 800/523-2200

Doosan Announces Multi-Year MLB Partnership Doosan announced a multi-year part2018, 2019 and 2020. nership with Major League Baseball. As “We’re very proud that Doosan, a an official partner of MLB, Doosan will great company with a rich history and a receive significant brand exposure across global footprint, has chosen MLB as a national broadcast and MLB-owned partner to continue growing their busichannels throughout the 2017 Postseason ness here in the U.S.,” said Noah Garden, and upcoming seasons. The partnership MLB executive vice president, business. also makes Doosan the first-ever brand “It’s going to be another exciting to be presenting sponsor of the American Postseason this year and we’re looking League Divisional Series (ALDS), givforward to having Doosan be a big part ing the Korean brand complete marketof it.” ing integration throughout the 2017 Doosan’s subsidiaries which reside in (L-R) are Kiryong Ha, president, Doosan Heavy Industries the United States, which account for $3 ALDS. Beginning with the 2017 Wild Card America Holdings; Rich Goldsbury, president, Doosan Bobcat billion in annual revenue and have games, fans will see Doosan commer- North America and Oceania; Noah Garden, MLB executive approximately 4,000 employees, particcials and branding across broadcast and vice president, business; Glenn D. Turner, VP engineering, ipated in this partnership in hopes of digital platforms including FOX, FS1, Doosan Turbomachinery Services; and Tony Jones, vice pres- elevating Doosan’s brand awareness in MLB Network and MLB.com. ident/CEO, Doosan Industrial Vehicle America. the U.S. market and closely communiAdditionally, MLB and Doosan will crecating with customers. While Doosan’s ate custom features for MLB Network and league America and Oceania. “We are the fastest grow- presence can be found in every area of the infradigital channels showcasing how teamwork leads ing infrastructure support business in the world structure support business, Doosan’s subsidiaries to winning results. Doosan also will give fans and our partnership with a marquee property like including Doosan Bobcat, Doosan Industrial exclusive access to select ALDS batting practices MLB allows us to further grow our winning Vehicle, Doosan Fuel Cell, Doosan and press conferences in real-time via Facebook Doosan brand in the critical U.S. market.” Turbomachinery Services, and Doosan The partnership extends through the end of GridTech are strengthening their presence in the Live. “We are honored to be an official partner of the 2020 MLB season, with Doosan set to U.S. market in the areas of construction equipMLB and to collaborate with our league partners receive branding, media and hospitality bene- ment, logistics equipment, and energy. to share the Doosan story and create content for fits throughout the regular season and within (This story also can be found on Construction baseball fans across the globe,” said Rich MLB Jewel Events including the All-Star Equipment Guide’s website at www.construcGoldsbury, president of Doosan Bobcat in North Game, Postseason and World Series during tionequipmentguide.com.)


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 131

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $120 • Color $180

Excavator, Backhoe & Loader Buckets, New & used, over 500 in stock, also Grapples, Thumbs & other attachments

C&S Equipment Co. 609/267-0782

19-20 AP

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make & model. Call McLaren 888-492-4230 20-21 DH

NEW AND SURPLUS STRUCT. STEEL JUMBO BEAMS, PIPE, ROAD PLATE

BUCKETSBOX: GRAVEL, BEDDING BOXES DUMP HOPPERS SKID STEER ATTACHMENTS

Joseph Fazzio Inc.com • 856-881-3185 N.J. 20-21 TM

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. Call McLaren 888-492-4230 20-21 DH

EXCAVATOR, MINI EXCAVATOR & BACKHOE BUCKETS ALL FULLY DRESSED W/ PINS & SIDE CUTTERS

Joseph Fazzio Inc.com • 856-881-3185 19-20 TM

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air SemiPneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 20-21 DH Call McLaren 888-492-4230

PLATES: STEEL PLATES 96” X 240” & LARGER ALL THICKNESSES - PREMIUM GRADE A570-50 ALSO - LARGE STEEL ANGLES

JFISTEEL.COM • 856-881-3185 19-20 TM

“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 37 states ............................................................Call

Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us 19-20 TM

Diesel & Gas / LP Exhaust Scrubbers

2006 Ditch Witch SK650 Skid Steer Loader, 2,248 Hours ..............................................................................$12,950 19-20 EB Call Tania 614-443-9751 x237

800.233.6539

Foley Engines 20-21 AP

Lowboy Trailer Pin On Flip Axles, In Stock, 275/Tires, Aluminum Wheels 610/534-0700 John at Stephenson Equipment 19-20 TM

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 614-395-4064 19-20 EB

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $120 per ad, $60 additional for color. Additional $20 to place online • Your ad will run for two consecutive issues in 1 region.

Attachments International has dozens of Severe Service Buckets in stock to fit all exavators and skidsteers. UP TO 50% OFF! 218-863-6444 • attintl@loretel.net 20-21 AP

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Northeast States. For more information, call Construction Equipment Guide today at

800/523-2200

Did this ad catch your attention? Color can work for you. Call Construction Equipment Guide 800/523-2200


Page 132 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLASSIFIEDS ASPHALT EQUIPMENT

\LOADERS

Power Box T-450 Track Paver, 8-12 heated screed, 4 ton hopper, low time, excellent condition ................................$6500.

2004 Case 580SM Plus II, 94’’ Front bucket w/ bolt-on cutting edge, 24’’ Five tooth rear bucket, 4WD, Cab Heat/AC, Good condition, 2,900 hours.............. ..................................$39,500.

Matawan, NJ 732-513-2768

CHIPPERS

Stephenson Equipment Inc 717-839-5083

‘12 Vermeer BC1000XL, 12’’ Chipper, 85 HP Cummins, New Tires, New Blades, 1,160 hours, Excellent condition ...... ..................................$25,400.

MISCELLANEOUS

Stephenson Equipment, Inc. 717-564-3434

130 ft “ROHN” Free Standing Tower 12 ft wide triangle base disassembled into 20 ft sections

CRANE INSPECTIONS ALL TYPES OF CRANES INSPECTED AND CERTIFIED

FOR SALE: RADIO TOWER

Excellent Condition $7500 732-513-2768

Accredited by the US Dept. of Labor Under 29CFR Part 1919 and Accredited by CALOSHA Call 215-639-2579 Atlantic Crane Inspection Services Visit us at www.atlanticcrane.com

TRAINING NCCCO Crane Operator Training Mobile Swing Cab, Fixed Cab, Lattice Truck & Crawler

FLAT RATE INSPECTIONS

Tower

All Types, Any Model Cranes

Overhead

OSHA Inspected and Certified Certified OSHA and ANSI Full-Time Inspectors Dielectric Testing Call 800-325-6455 Stephenson Equipment Visit our website: www.stephensonequipment.com

EXCAVATORS 2014 Wacker Neuson 50Z3, 10 Ton Wheeled Excavator, Used condition, 1,250 hrs.................. ..................................$42,000. Able Tool & Equipment abletool.net 860-289-2020

Prep Classes with Written Exam Hands On Training with Practical Exams

Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 NCCCO Crane Operator Training

®

Mobile Tower Self Erecting Tower Overhead Articulated Knuckleboom Service Truck Rigger 1 & 2 Signal Person Trained at our location in PA or NJ or your location. All trainers NCCCO Certified Call 215-639-2579 Atlantic Crane Inspection Services Visit us atwww.atlanticcrane.com

Next Issue Closes Friday October 9th

DO YOU HAVE A FEW PIECES OF HEAVY EQUIPMENT TO SELL?

$40

ONLY

Construction Equipment Guide is THE Place to List It!

2 INSERTIONS IN ONE REGION (Northeast, Southeast, Midwest, West) 30 words or less - $1.20 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database.

Call 800-523-2200 or go online to place your ad: You must have a classified print ad to do so.

www.constructionequipmentguide.com/pages/customer/classifieds.asp and place your ad through our website and we will contact you!

Subscribe to CEG today... Get an edge on your competition! Construction Equipment Guide Northeast Edition subscribers are the best informed about construction news, construction equipment, sales, auctions, equipment prices, trends and changes in the industry and activities of its people. Call Toll Free! We now accept Visa, Mastercard & American Express!

SUBSCRIPTIONS: One-Hour Practice with Practical Exams Signal Person

One Year $65

(within United States & Puerto Rico Only)

CARDMEMBER’S NAME _________________________________________________________ COMPANY NAME _______________________________________________________________ STREET____________________________________ PHONE NO. ________________________

Rigger I & II Re-Certifications

CITY ______________________________________STATE _______ ZIP ________________

Check Enclosed

VISA

MASTERCARD

American Express

CARD NUMBER

4 training locations in PA or at your location EXP. DATE (Mo./Yr.)

All instructors are NCCCO Certified Call Chris 717-558-7248 Stephenson Equipment Visit our website: www.stephensonequipment.com

SIGNATURE OF AUTHORIZED CARDHOLDER

TOLL FREE ®

1-800/523-2200 FAX 215/885-2910

470 Maryland Dr. • Ft. Washington, PA 19034 Email: circulation@cegltd.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 133

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: SCRAP COPPER WIRE I PURCHASE SCRAP COPPER WIRE, ALL MCM SERIES UNDERGROUND ETC. ANYWHERE IN THE U.S. I WILL PAY TOP DOLLAR CONTACT: ROBERT COOPER PH: 979-341-9006 EMAIL: RCOOPER.TWS@GMAIL.COM FAX: 979-341-9006 –––––––––––––––––––––––––––––––– WANTED TO BUY CAT 325DL EXCAVATOR WITH GOOD U/C AND CLEAN MACHINE. PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: ABDAL HAJI SALEEM PH: 415-687-0337 EMAIL: HAJICONSTRUCTEST@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: USED K-TEC 1228 SCRAPER. CONTACT: MIKE SUMMERS PH: 216-316-0882 EMAIL: DANDMEARTHMOVING@AOL.COM FAX: 440-965-4187 –––––––––––––––––––––––––––––––– WANTED: HYDRAULIC THUMB WITH VALVES AND CONTROLS TO FIT CAT 2250 EXCAVATOR CONTACT: MART LONG PH: 704-842-2710 EMAIL: MARTINLONG@BELLSOUTH.NET –––––––––––––––––––––––––––––––– WANTED: NEEDED BULLDOZER D10R AND TRUCK 777G UNADVERTISED CONTRACTOR ONLY CONTACT: JEAN MAURICE BOUTIN PH: 450-346-8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: EAGLE 1000/UM15 CRUSHER EAGLE 1000 OPEN CIRCUIT OR BARE UM15 OR UM25 CRUSHER CONTACT: JOE PH: 724-944-5569 EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– WANTED: MANUALS, CATALOGUES, DIAGRAMS OF GLEASON PAUFTER PE 80 HOBBING MACHINE WE HAVE PURCHASED A USED GEAR HOBBING MACHINE FROM FORD MOTOR CO, SHARONVILLE, OHIO THROUGH A DEALER. UNFORTUNATELY WE DID NOT GET ANY OF THE MACHINE MANUALS WITH IT. THE MACHINE IS PAUFTER PE 80, YOM 1999, SR NO 28577 ELECTRIC CIRCUIT DIAGRAM 702A -44155 HYDRAULIC DIAGRAM. 702A-46277 PNEUMATIC DIAGRAM. 702A-44151 LUBRICATION DIAGRAM. 702A -44153 CONTACT: SUNIL UNDE PH: 982-302-9083 EMAIL: UNDEANCILS@HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED: 450 CASE LOADER TRACK PARTS TRACK PADS 450 CASE LOADER CONTACT: ALEC TODD PH: 864-710-0447 EMAIL: TODDJAT@BELLSOUTH.NET ––––––––––––––––––––––––––––––––

WANTED: ATTACHMENTS INTERNATIONAL 140BM ASPHALT CUTTER CONTACT: AMANDA HANSON PH: 218-331-8597 EMAIL: KMANDA27@AOL.COM –––––––––––––––––––––––––––––––– WANTED: ANTIQUE & VINTAGE FARM TRACTORS I AM LOOKING TO PURCHASE ANTIQUE & VINTAGE FARM TRACTORS RUNNING OR NOT. WILL PAY CASH ON THE SPOT FROM $500-$3000 DEPENDING ON THE YEAR, MAKE, MODEL AND CONDITION. I'M LOOKING FOR THE FOLLOWING YEARS 1930’S-1950'S AND THE FOLLOWING MANUFACTURERS: HI, JOHN DEERE, MINNEAPOLIS, COCKSHUTT, FORD, OLIVER, FARMALL, ALL IS CHALMERS, CASE, SILVERKING, INTERNATIONAL, WD, CAT, HEFTY, MASSEY FERGUSON, MCCORMICKDEERING AND MANY OTHERS. I WILL PURCHASE ANYWHERE IN NORTH AMERICA CONTACT: ROBERT COOPER PH: 979-341-9006 EMAIL: SALES.TWS@OUTLOOK.COM FAX: 979-341-9006 –––––––––––––––––––––––––––––––– WANTED: NEEDED BULLDOZER NEEDED BULLDOZER KOMATSU 51PX 23 ENC CAB 28 INCHES AS DES 2016 AND UP UNDER 600 HOURS UNADVERTISED USER USA AND D11T ENC CAB 2016 UNDER 6000 HOURS USER UNADVERTISED OR PAST THANKS CONTACT: JEAN MAURICE BOUTIN PH: 450-346-8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: PARTS FOR 15 INTERNATIONAL. TRACKS, SPROCKETS, ROLLS INTERNATIONAL SERIAL #25752 OR JUST TRACKS. PLEASE CALL 716-4858270. CONTACT: JOE BITTINGER PH: 716-485-8270 EMAIL: JOELIND@FAIRPOINT.NET –––––––––––––––––––––––––––––––– WANTED: NEEDED BULLDOZER WANT TO BUY BULLDOZER 375A-3, 375A-5 ENC CAB RIPPER D10T D11T ENC CAB RIPPER IN THE WORLD UNADVERTISED 12 MONTHS LOW HOURS CONTACT: JEAN MAURICE BOUTIN PH: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: AG & CONSTRUCTION MANUALS BUYING NEW OR USED CONSTRUCTION AND AGRICULTURE SERVICE, PARTS AND OPERATOR MANUALS. IF YOU HAVE MANUALS YOU NO LONGER NEED OR PERHAPS YOU NO LONGER HAVE THAT MACHINE FOR THAT CERTAIN MANUAL, PLEASE GIVE ME A CALL. I BUY LARGE AND SMALL LOTS OF MANUALS. CONTACT: JOHN WHITNEY PH: 530-864-0771 EMAIL: WHITNEYJ65@YAHOO.COM FAX: 530-864-0771 ––––––––––––––––––––––––––––––––

WANTED: JOHN DEERE 110 TLB I'M LOOKING FOR A LATE MODEL IN VERY NICE SHAPE UNDER 1K HOURS WITH AUX HYDRAULICS FRONT AND REAR. A 4 IN 1 BUCKET AND A THUMB WOULD EXTRA NICE. CONTACT: KEN FAINT EMAIL: KFAINT@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE 544J OR LARGER • 2005-2007 JOHN DEERE 544 J WHEEL LOADER CONTACT: PATRICK J. BUGGY PH: 970-497-8221 EMAIL: PBUGGY@SJCCO.COM –––––––––––––––––––––––––––––––– WANTED: CAT 140G LOOKING FOR CAT 140G. PLEASE EMAIL ME AND SEND DETAILED PICTURES OF AVAILABLE EQUIPMENT. CONTACT: NAQIB KHAN PH: 03-333-298-751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: NEED BULLDOZER WANT TO BUY BULLDOZER KOMASTU 375A 5 OR 375A 6 WITH RIPPER, USA LOCATION FROM USER UNADVERTISED. NEED 3 PLEASE CONTACT: JEAN MAURICE BOUTIN PH: 450 346 8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: WE BUY EQUIPMENT MANUALS • WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS, BUT NOT INCLUDED TRUCKS AND VEHICLES. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL US. CONTACT: GRACE FRANCES PH: 270-849-2270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– WANTED: DRESSER 200 TRAC LOADER RUNNING OR NOT - FOR PARTS CONTACT: STANLEY FELLS PH: 785-257-3360 EMAIL: SFELLS@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: NEEDED BULLDOZER NEEDED BULLDOZER D10N WITH RIPPER, KOMASTU 375A 3 WITH RIPPER, 475A 5 WITH RIPPER FOR PIECES OR RUNNING. USA LOCATION CONTACT: JEAN MAURICE BOUTIN PH: 450 346 8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA ––––––––––––––––––––––––––––––––

WANTED: NEEDED BULLDOZER WANT TO BUY BULLDOZER D10N D10R ENC CAB WITH RIPPER UNADVERTISED NEED KOMATSU 375 A 3 475A 3 FROM BANK REPOS OR FOR PIECES CONTACT: JEAN MAURICE BOUTIN PH: 450-346-8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: DEERE 644K 4 YD BUCKET DEERE 644K 4.0 YD GP BUCKET CONTACT: FRANK @ GROFF TRACTOR PH: 800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– WANTED: STEEL END DUMP TRAILER OLDER MODEL 25 TO 35 FT END DUMP TRAILER STEEL TANDEM OR TRI, USED CONDITION FINE WANTED: SCRAP/ BROKEN CONCONTACT: CHRIS BAREFOOT STRUCTION MACHINERY (PH: 919-622-0160) I AM LOOKING FOR SCRAP/ BROKEN EMAIL: TLCWORKSINC@GMAIL.COM CONSTRUCTION MACHINERY. IF YOU FAX: 919-207-0571 HAVE 1 OR 1000 PIECES I WILL PUR–––––––––––––––––––––––––––––––– CHASE AND THE PICKUPS ARE FREE. WANTED: APE 200-6 BACK HOES, LOADERS, EXCAVATORS, APE 200-6 – VIBRATORY HAMMER AND FORKLIFTS, CRANES, SKID STEERS, POWERPACK WITH 11’ CASSION BEAM CONVEYORS, PLUS MANY MORE! I APPROX. WITH DUAL CLAMPS TO WILL PICK UP ANYWHERE IN NORTH INSTALL AND EXTRACT ROUND STEEL CASING AMERICA. ALL I NEED ARE PHOTOS CONTACT: COLLEEN DOUTY AND DESCRIPTIONS OF YOUR (PH: 214-226-6867) MACHINES. I AM CURRENTLY PAYING $60.00 PER TON ON ALL UNPREPARED EMAIL: CDOUTY@OVERLANDCORPORATION.COM STEEL. CONTACT ME ANY TIME. THE –––––––––––––––––––––––––––––––– BEST WAY TO REACH ME IS BY WANTED: BULLDOZER PHONE; MY EMAIL IS NOT ALWAYS WANT TO BUY BULLDOZER- KOMASTU WORKING. 375A 3 AND 475A 3 WITH RIPPER, 1996 CONTACT: ROBERT COOPER TO 2005 RUN OR PIECES MUST BE PH: 979-341-9006 UNADVERTISED PLEASE EMAIL: CONTACT: JEAN MAURICE BOUTIN CONSTRUCTIONEQUIPMENT4LESS@ (PH: 450-346 8975) GMAIL.COM EMAIL: FAX: 979-341-9006 JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED: REAR AXLE WANTED: USED PORTABLE ASTEC I AM LOOKING FOR A COMPLETE REAR ASPHALT PLANT AXLE ASSEMBLY FOR A HYUNDAI HL YEAR MODEL 2000 OR NEWER ASTEC, 757-7 SN LD0110229. IT IS A VOLVO 300 TON PORTABLE DRUM MIX AXLE OEM REAR AXLE PN 81LD-20010 ASPHALT PLANT - PORTABLE FIVE BIN COLD FEED SYSTEM - PORTABLE RAP SUPERCEDING # 81LD-20011 DIFFERSYSTEM - PORTABLE SELF-ERECTING ENTIAL CARRIER PN XKBQ-00476 SILO USED SURGE SYSTEM (ASPHALT HOUSING CASTING PN 7126-24100. SILOS) - 2 -200 TON SILOS - TRAVERSE WOULD BE ALSO OK WITH CONVENCONVEYOR - 36’ DRAG SLAT CONVEYTIONAL OR LIMITED SLIP DIFFERENOR - 100’ TRUCK SCALES TIAL. PLEASE LET ME KNOW IF YOU HAVE ANY OPTIONS AVAILABLE OR IF CONTACT: COLLEEN DOUTY (PH: 214-226-6867) THERE IS ANY OTHER INFORMATION EMAIL: CDOUTY@ YOU MAY NEED. OVERLANDCORPORATION.COM CONTACT: DON L. FAX: 214-226-6867 PH: 585-584-3425 –––––––––––––––––––––––––––––––– EMAIL: WANTED: NEEDED BÙLLDOZER DONL@GEORGEANDSWEDE.COM NEEDED BULLDOZER KOMATSU FAX: 585-584-8290 275,375,475 ENC CAB WITH RIPPER –––––––––––––––––––––––––––––––– 2012 USA LOCATION MUST NE UNADWANTED: CAT D5B LGP VERTISED PLEASE CAT D5B LGP MODEL CONTACT: JEAN MAURICE BOUTIN CONTACT: MOLAI (PH: 450-346-8975) PH: 630-379-9175 EMAIL: EMAIL: MANSOOR.MOLAI@GMAIL.COM JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––

WANTED: JOHN DEERE 410 BACKHOE CASE 580 BACKHOE 1998 TO 2007 CONTACT: ROGER PH: 810-845-4540 EMAIL: RSTUDLEY@COMCAST.NET FAX: 810-845-4540 –––––––––––––––––––––––––––––––– WANTED: NEEDED BULLDOZER NEEDED USA LOCATION BULLDOZER KOMASTU 2014 AND UP 155 275 375. 475 ENV WITH RIPPER D10N D10R D10T D11N D11R D11T ENC ÇAB WITH RIPPER OR REPOSSES BANK OR LIEN CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: INTERNATIONAL TD20C DOZER & INTERNATIONAL 250E LOADER RUNNING OR NOT, FOR PARTS! CONTACT: ALBERT HARLOW (PH: 267-738-5984) –––––––––––––––––––––––––––––––– WANTED: FORGING PRESSES LOOKING FOR FORGING PRESSES, 1350 TON, 1600 TON AND 2500 TO 4000 TON ALL MECHANICAL CONTACT: HERB KAISER (PH: 248-680-1000) EMAIL: HERB@GIBBSIND.COM –––––––––––––––––––––––––––––––– WANTED: 2 CATERPILLAR 740B ARTIC TRUCKS LATER MODEL, MAX 5000 HOURS, USA LOCATION CONTACT: RICHARD (PH: 603 828-6100) EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: LOOKING FOR LATE MODEL BACKHOE ASAP IN TEXAS I'M LOOKING FOR 2000-2010 COMPLETE BACKHOE ASAP! PLEASE AUCTION PRICES ONLY. I'M A DEALER SO NO RETAIL, I'M LOOKING TO PURCHASE IN QTY IF THE PRICE IS RIGHT. LOOKING FOR UNITS IN THE TEXAS AREA IF POSSIBLE. I HAVE CASH TODAY!! NOTE: CAN BE IN WORKING OR NON WORKING CONDITION. CONTACT: MATTHEW (PH: 346-230-4485) EMAIL: SALES.AMERICANPUMPANGEAR@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: HITACHI EX200 AND EX400 WANTED TO BUY HITACHI EX200, EX200-1, EX270, EX400 AND EX400-1. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESARA (PH: 832-528-0786) EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 2817270415 ––––––––––––––––––––––––––––––––


Page 134 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Houston, TX Thurs., October 5, 2017 For: Complete Liquidation Late Model Industrial Equipment

• Woodstock, Ontario, Canada November 20 - 21, 2017 For: Very Late Model Agricultural Equipment & more • Middletown, NY Fri., December 1, 2017 For: Late Model Rental Returns Construction Equipment

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com

• Buffalo, NY Sat., December 2, 2017 For: Job Completion Earthmoving Equipment & more

BAR NONE AUCTION

HESS AUCTIONEERS

www.barnoneauction.com 866-372-1700

www.hessauctioneers.net 866-511-2493

• Queretaro, Mexico Thurs, October 12, 2017 For: Large Late Model Construction Equipment

• Marietta, OH Fri., December 8, 2017 For: Late Model Rental Fleet Equipment & more

• Sacramento, CA October 13 - 14, 2017 For: 2 Day Monthly Public Auction

• Marietta, PA Fri., October 20, 2017 For: Truck, Trailer & Equipment

• Sacramento, CA Fri., October 13, 2017 For: Large Late Model Rental Return Construction Equipment

• Las Vegas, NV Sat., December 9, 2017 For: Late Model Rental Fleet Equipment & more

• Portland, OR Fri., October 27, 2017 For: Monthly Public Auction

• Marietta, PA Fri., December 8, 2017 For: Truck, Trailer & Equipment

• Cape Cod, MA Sat., October 14, 2017 For: Snow & Construction Equipment

• Atlantic City, NJ Sat., December 16, 2017 For: Very Late Model Rental Returns Earthmoving Equipment & more

• Sacramento, CA Sat., November 11, 2017 For: Monthly Public Auction

HOUSBY AUCTIONS

• Exeter, RI Fri., October 6, 2017 For: Acquisition Auction, Construction Equipment & more

• Spartanburg, SC October 19 - 20, 2017 For: 2-Day Complete Liquidation Construction Equipment • Montreal, Quebec, Canada Sat., October 21, 2017 For: Rentals! Late Model Construction Equipment & more • Iowa City, IA Wed., October 25, 2017 For: Something Special – Major Project Completion. • Auburn, MA Fri., October 27, 2017 For: Late Model Construction, Ag, Snow Equipment & more • Gouverneur, NY Sat., October 28, 2017 For: 1 Owner Retirement Paving & Construction Auction

• Syracuse, NY Sat., November 11, 2017 For: Complete Liquidation Retirement Auction • Orlando (Kissimmee), FL Wed., November 15, 2017 For: Large Rental Return Auction • Mt. Hope, OH November 16 - 17, 2017 For: Famous Amish Forestry & Sawmill, Generator, Heavy Construction Equipment Auction • Torrington, CT Sat., November 18, 2017 For: Very Large Job Completion Construction Equipment & more

• Agency, IA Wed., October 18, 2017 For: Fall Non-Reserve Public Construction/Farm Equipment • Brooklyn, MS November 10 - 11, 2017 For: Fall Public Auction Construction/Farm Equipment

JOEY MARTIN AUCTIONEERS

• ONLINE ONLY Thurs., October 19, 2017 For: Online Only Sale • Lebonan, TN Sat., December 9, 2017 For: Heavy Equipment RITCHIE BROS.

EQUIPMENTONE www.equipmentone.com 855-723-7781 • ONLINE ONLY For: Fall Heavy Equipment Auction. First lot closes Tues., October 10.

www.joeymartinauctioneers.com 864-940-4800

RTI AUCTIONS

• Blairsville, GA Sat., October 21, 2017 For: Early winter Equipment Auction

www.teitsworth.com 585-243-1563

• Rochester, NY Sat., October 7, 2017 For: Municipal & Contractor Equipment & Vehicle Auction

• ONLINE ONLY November 8, 2017

www.mmaauction.com 864-947-7888

SALES AUCTION COMPANY, LLC

www.bidadoo.com 1-877-BIDADOO

• ONLINE ONLY November 29, 2017

www.salesauctioncompany.com 860-627-7506

• ONLINE ONLY Thurs., October 5, 2017

• ONLINE ONLY December 13, 2017

• Norcross, GA Tues., October 10, 2017 For: Absolute Retirement Auction

• ONLINE ONLY Thurs., October 12, 2017

• ONLINE ONLY December 27, 2017

• ONLINE ONLY Thurs., October 19, 2017

RITCHIE BROS. AUCTIONEERS

HUNYADY AUCTION COMPANY

• ONLINE ONLY Thurs., October 26, 2017

www.rbauction.com 402-421-2631

www.hunyady.com 800-233-6898

• ONLINE ONLY Thurs., November 2, 2017

• Denver, CO October 5, 2017

• ONLINE ONLY Thurs., November 9, 2017

• Latrobe, PA Wed., October 11, 2017 For: Complete Liquidation R.A. Monzo Construction Co., Inc.

BIG IRON AUCTIONS

I.R.A.Y. AUCTION

• Rochester (Danville), NY Sat., December 30, 2017 For: Late Model & Rental Return Construction Equipment Auction • Orlando (Kissimmee), FL February 3 – 11, 2018 For: The 25th Annual 9-Day Florida Auction

• Middletown, NY Fri., November 3, 2017 For: 2 Auctions in 1 Day – Job Completion & Retirement Auction

• Racine, WI Fri., November 10, 2017 For: Midwest’s Finest Heavy Haul Transportation Companies Auction

• ONLINE ONLY October 2 - 10, 2017 For: Monthly Government Public Auction

www.ritchason.com 800-806-3395

MARTIN & MARTIN AUCTIONEERS, INC.

• Rockford, IL Thurs., November 2, 2017 For: Complete Liquidation Construction Equipment & more

• Houston, TX Tues., November 7, 2017 For: Late Model Rental Return Fleet Construction Equipment

• ONLINE ONLY October 11, 2017

www.jeffmartinauctioneers.com 601-450-6200

RITCHASON AUCTIONEERS INC.

• ONLINE ONLY October 25, 2017

• Albany, NY Fri., December 29, 2017 For: Rental Returns of Late Model Construction Equipment & more

• Wasilla, AK October 7, 2017

• Syracuse, NY Sat., November 4, 2017 For: One of a Kind Sale Construction Equipment & more

• Portland, OR Fri., December 1, 2017 For: Monthly Public Auction

www.housby.com 866-218-6266

JEFF MARTIN AUCTIONEERS, INC.

• Fort Pierre, SD October 12, 2017

• Sacramento, CA Sat., December 9, 2017 For: Monthly Public Auction

BIDADOO AUCTIONS

www.bigiron.com 800-937-3558

www.iraymn.com 320-968-7230

• Chehalis, WA October 20, 2017

• ONLINE ONLY October 4, 2017

• North East, MD October 24, 2017

• ONLINE ONLY October 11, 2017

• Foley, MN Fri., December 1, 2017 For: Heavy Equipment, Truck & Trailer Auction

• Grants Pass, OR October 26, 2017

• ONLINE ONLY October 18, 2017

INSIGHT AUCTIONEERS

• Des Moines, IA October 27, 2017

• ONLINE ONLY October 25, 2017

www.insightauction.com 863-386-1225

• Minot, ND November 7-8, 2017

• ONLINE ONLY November 1, 2017

• Houston, TX November 8-9, 2017

• ONLINE ONLY November 8, 2017

• Sebring, FL Sat., November 11, 2017 For: Construction & Agricultural

• Bozeman, MT November 9, 2017

• ONLINE ONLY November 15, 2017

• Pittsburgh, PA November 14, 2017

DUNN DEAL AUCTION CO.

• Phoenix, AZ November 15, 2017

www.dunndealauctions.net 614-946-6853

AARON POSNIK AUCTIONEERS

• Lebanon, OH Sat., October 7, 2017 For: Construction Equipment & more

www.posnik.com 413-733-5238 • Rindge, NH Wed., October 4, 2017 For: General Contractor Construction Equipment • Winchendon, MA Thurs., October 5, 2017 For: Building Material Inventory

EQUIFY AUCTIONS, LLC www.equifyauctions.com 888-535-8218 • Sealy, TX Tues., October 10, 2017 For: Absolute Heavy Equipment Auction

• ONLINE ONLY October 12 - 19, 2017 For: Timed Online Only • Pelzer, SC Thurs., December 7, 2017 For: Winter Construction Equipment/Trucks Auction

NITKE AUCTIONS www.nitkeauctions.com 715-693-4447 • Wausau, WI October 27 - 28, 2017 For: 52nd Annual Wisconsin Contractors Auction

POWERS AUCTION SERVICE www.powersauction.com 608-439-5764 • Benton, WI Fri., October 13, 2017 For: Randolph Excavating Complete Close-Out Auction

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

JAMES G. MURPHY INC. AUCTIONEERS

• ONLINE ONLY Thurs., October 5, 2017 For: Truck and Trailer Auction

www.murphyauction.com 800-426-3008

• ONLINE ONLY Thurs., October 12, 2017 For: Construction Equipment

• Kenmore, WA Sat., October 7, 2017 For: Heavy Equipment, Contractors Equipment & Vehicles

J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE

• ONLINE ONLY Thurs., October 5, 2017 For: J.J. Kane conducting a Benefit ICEUU Call of Duty™ Endowment Auction • Waxahachie, TX Thurs., October 12, 2017 For: Public Auction

• ONLINE ONLY Tues., October 17, 2017 For: Kansas Turnpike Authority Auction • ONLINE ONLY Thurs., October 19, 2017 For: Truck & Trailer Auction • ONLINE ONLY Tues., October 24, 2017 For: Kansas Department of Transportation Auction • ONLINE ONLY Thurs., October 26, 2017 For: Construction Equipment

• Windsor Locks, CT Sat., October 7, 2017 For: Public Equipment Auction

STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • ONLINE ONLY October 4 - 11, 2017 For: October Online Auction Upper Midwest Locations • West Fargo, ND Wed., November 29, 2017 For: Aglron West Fargo Event

VANTAGE AUCTIONS www.vantageauctions.com 951-228-9040 • Lake Elsinore, CA Sat., October 7, 2017 For: Heavy Construction Equipment

WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat., December 9, 2017 For: Construction Equipment, Truck & Trailers

WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Phoenix, AZ Sat., October 14, 2017 For: Public Auction held 2nd Saturday of every month

YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Kissimmee, FL Wed., October 25, 2017 For: Heavy Equipment Auction


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 135

Exhibit Tells Tales of West Virginia’s Infrastructure

42

Important Auctions

315.633.2944 • www.lyonauction.com • www.lyonauctionlive.com

AUCTION CALENDAR 1.

Thursday, October 5: HOUSTON, TEXAS: Complete Liquidation. All late Model Industrial Equipment-All Functional. Hilites: CNC Machines: 2011 Haas VF11/50, 2006 Haas VF-5B/40, 2007 Haas SL30LB, 2004 Haas VF2B, Taylor TX 550M Forklift, (30+)Welders, Support Equipment.

follow

us on

@Lyo nAuc tion!

Trailers as new as 2016(primarily Kalyn Siebert, Etnyre, Fontaine to include Kalyn Siebert 9-axle Lowboy(10ft.), Kalyn Siebert 3x3x2, Kalyn Siebert 2x3x2, Kalyn Siebert 2x2x2 RGN, Kalyn Siebert Tribeam Lowboy, Several Kalyn Siebert 55T RGN Plus Stingers & Axles, (4)Etnyre 55-ton.

Saturday, November 11: SYRACUSE, NEW YORK: Complete Liquidation. Friday, October 6: EXETER, RHODE ISLAND: Acquisition Auction. 17. Retirement Auction. Vermeer Horizontal Directional Drills, Kawasaki Rubber Tired Construction Equipment, Aerials, Truck Tractors, Dump Trucks, Rolloff Trucks, Loaders, Kubota, NH Skid Steers, Kobelco, JD, Hydraulic Excavators, Freightliner, IH (25)Rolloff Containers, Pickups, Large Quantity Support Equipment & Attachments. Dump Trucks, SPECIAL: 2017 Western Star, 2014 Rogers 55-ton Detachable, PLUS: 3. Thursday, October 12: QUERETARO, MEXICO: Late Model Cat, Case, John Pickup & Service Trucks(up to 2016), Flatbed Trucks, Tagalong & Van Trailers, Deere Earthmoving Equipment, Aerial Lifts, Forklifts, Trucks and Trailers, Support, Generators, Godwin Water Pumps, Air Compressors, Light Plants, Sewer Jet, Sewer Attachments. Vac, Forklifts, Crawler Tractors, Boring Machines, Hydroseeders, Brooms, Wood Chipper, Complete Line of Farm Equipment from Tillage to Haying to Harvesting, 4. Friday, October 13: SACRAMENTO, CALIFORNIA: Large Late Model Cat & Complete Shop, Support, Trench Boxes, Road Plates. John Deere Rental Returns. 20+ Hydraulic Excavators(primarily Cat up to 2015), 10 Rubber Tired Loaders(primarily Cat up to 2015), Cat Crawler Tractors, Cat Skid Steers, 18. Wednesday, November 15: ORLANDO (Kissimmee), FLORIDA: Large Cat & Genie Telescopic Forklifts, JLG & Genie Boom & Scissor Lifts. Rental Return Auction. HILITES: Construction Equipment, Forklifts, Aerial Lifts, Attachments, Support, Trucks, Trailers, Tagalons and more. 5. Saturday, October 14: CAPE COD, MASSACHUSETTS: Snow & Construction Equipment Auction. Cat, John Deere, Case Late Model Equipment, Snow & Dump 19-20. Thursday & Friday, November 16 & 17: MT. HOPE, OHIO: The famous Trucks, Pickups, All Types of Support Equipment. Amish Forestry & Sawmill, Generator, Heavy Construction Equipment Auction. In Conjunction with Air Works Auction Company. Late Model Cat, Komatsu, John Deere, Case 6-7. Thursday, October 19-Friday, October 20: SPARTANBURG, SOUTH CARConstruction Equipment, Large Quantity Late Model Cat Skid Steers, Forklifts, Aerial Lifts. OLINA: 2-Day Auction. Complete Liquidation. It's Big. Cat, John Deere, Komatsu, Case, Volvo Hydraulic Excavators, Motor Graders, Motor Scrapers, Crawler Tractors, 21. Saturday, November 18: TORRINGTON, CONNECTICUT: Very Large Job Crawler Loaders, Rubber Tired Loaders, Marine, Aggregate, Forestry Equipment, Completion Auction. Construction Equipment, Aggregate, Aerial Lifts, Dump Trucks, Grove, Terex Cranes, Dump Trucks, Truck Tractors, Pickups, Equipment & Dump Truck Tractors, Detachables, Drop Decks, Hi Flat Trailers, Attachments, Support Trailers, Very Large Quantity of Non-running Earthmoving Machines, Quantity of Equipment. Collectible Antique Ag Tractors & Implements, and Construction Equipment. 22-23. Monday, November 20 & Tuesday November 21: WOODSTOCK, 8. Saturday, October 21: MONTREAL, QUEBEC, CANADA: Rentals, Rentals, ONTARIO, CANADA: 2-Day Auction. Very Late Model Agricultural Equipment, Rentals. Very Late Model Construction Equipment, Aerials, Forklifts, Tractor Loader John Deere, Case-IH, New Holland, Kubota Tractors and Large Assortment of PlantingBackhoes, Skid Steers, Generators, Light Plants, Air Compressors, Plus Large Quantity Harvesting Implements, Haying Equipment, Plus a Wide Variety Construction Snow Equipment, Attachments, Support, All Kinds of Trucks and Trailers. Equipment to Include Late Model Hydraulic Excavators, Loaders, Backhoes, Skid Steers, Aerials, Welders, Generators, Attachments & SupportEquipment. 9. Wednesday, October 25: IOWA CITY, IOWA: Something Special-Major Project Completion. Late Model Cat, John Deere, Volvo, Articulated Hauls Trucks, Mack Dump 24. Friday, December 1: MIDDLETOWN, NEW YORK: Late Model Rental Returns. Trucks, Aerial Lifts, Forklifts, Skid Steers, Dump Trailers, Attachments, Support. Cat, Komatsu, John Deere Construction Equipment, Aerial Lifts, Forklifts, Truck Tractors, Service Trucks, Dump Trucks, Equipment & Dump Trailers, Attachments, Support. 10. Friday, October 27: AUBURN, MAINE: Late Model Cat, Case Construction, Aggregate Equipment, Snow Vehicles, Truck Tractors-Volvo, Mack, Dump Trucks, 25. Saturday, December 2: BUFFALO, NEW YORK: Job Completion. Late Model Cat, Equipment & Dump Trailers, Support Equipment, Attachments. John Deere, Komatsu Earthmoving Equipment, Aerials, Trucks, Trailers, Support Equipment. 11. Saturday, October 28: GOVERNEUR, NEW YORK: Large 1 Owner 26. Friday, December 8: MARIETTA, OHIO: Late Model John Deere, Cat Retirement Auction. Cat, Komatsu Construction & Paving Equipment, Articulated Haul Komatsu, Rental Fleet Equipment, Attractions, Support, Trucks & Trailers. Trucks, Aerial Lifts, Support, Dump Trucks, Truck Tractors, Support Trucks. It's clean. 27. Saturday, December 9: LAS VEGAS, NEVADA: Late Model Rental Fleet 12. Thursday, November 2: ROCKFORD, ILLINOIS: Complete Liquidation. Equipment, Telescopics, Booms, Scissors, All Types Late Model Construction Over 60 Years in Business. M. Adams Equipment Company. Primarily Cat Construction Equipment, Trucks, Trailers, Attachments & Support Equipment. Equipment, Crawler Tractors, Crawler Loaders, Rubber Tired Loaders, Skid Steers, Saturday, December 16: ATLANTIC CITY, NEW JERSEY: Very Late Model Loader Backhoes, Motor Graders, Motorscrapers, Excavators, Compaction, Forklifts, 28. Rental Returns of Cat, Komatsu, Doosan, Bobcat Earthmoving Equipment, Cranes, Welders, Generators, Light Plants, Boom & Scissor Lifts, Sweepers, Trenchers, Aerial Lifts, Forklifts, Attachments, Support Equipment, Dump Trucks, Truck Tractors, Woodchippers, Truck Tractors, Equipment Trailers, Pickups, Agricultural Tractors, Dump Trailers, Tagalongs. Enormous Amount Skid Steer & Hydraulic Excavator Attachments, Buckets, and a Very 2.

Craig Hudson, Gazette-Mail photo

The “Transportation in West Virginia” exhibit, which opened Sept. 5 at the Culture Center in Charleston, W.Va., features highlights of the construction of 38,770 miles of public roads through the state’s hilly terrain.

By Emily Buenzle CEG WEB EDITOR

An exhibit celebrating the history of West Virginia’s infrastructure is now open for viewing. The “Transportation in West Virginia” exhibit, which opened Sept. 5 at the Culture Center in Charleston, W.Va., features highlights of the construction of 38,770 mi. of public roads through the state’s hilly terrain, the Charleston Gazette-Mail reported. The exhibit includes: • historical construction equipment • 20th-century car accessories • a wooden replica of the New River Gorge Bridge • an 1870s-era brick that was part of the first paved brick street in the country • a variety of historical photos of road building, road use, bridges and more • videos about the New River Gorge Bridge and West Virginia Turnpike construction, as well as the collapse of Silver Bridge in 1967 • information covering West Virginia’s first major road construction projects from when the state was still part of Virginia, and much more, the Charleston Gazette-Mail reported. “It covers West Virginia road building and bridge construction from the James River and Kanawha Turnpike until today,” said Charles Morris, operations manager of the West Virginia State Museum. “Everything here is from the State Museum collection or from the State Archives. Even the New River Gorge Bridge segment was built by technicians from the State Museum or Culture and History staff.” According to Morris, the exhibit helps to commemorate both the 40th anniversary of the New River Gorge Bridge opening and the 50th anniversary of the fatal collapse of the Silver Bridge at Point Pleasant, the Charleston Gazette-Mail reported. The exhibit will be open to the public until mid-December. For more information, visit wvgazettemail.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

Large Shop Filled with Undercarriage Repair Machines, Parts, Tools & Special Real 29. Friday, December 29: ALBANY, NEW YORK: Rental Returns of Late Model Estate-8 Acres and Lots of Buildings and Office Space. Construction Equipment, Forklifts, Attachments, Support, Dump Trucks, Truck Tractors, Pickups, All Types of Trailers. 13. Friday, November 3: MIDDLETOWN (Brewster), NEW YORK: 2 AUCTIONS IN 1 DAY- #1: Job Completion Auction. Late Model Aggregate-Crushers, 30. Saturday, December 30: ROCHESTER (DANSVILLE), NEW YORK: Late Impact & Cone, Screening Plants, Radial Stackers, Conveyors, Washers, Scales, Model Municipal & Rental Return Auction. Construction Equipment (Primarily Cat & Generators, Light Plants, Plus Full Line of Primarily Cat Rubber Tired Loaders, Cat Skid John Deere), Dump Trucks, Truck Tractors, Aerials, Telescopic Forklifts, Attachments. Steers, Hydraulic Excavators, Cat Crawler Tractors, Accessories and Support 31-39. Saturday, February 3 to Sunday, February 11: ORLANDO(Kissimmee), Equipment. #2: Retirement Auction. Highlights: 2012 Sandvik QA140 Screening Plant, FLORIDA: It's An Event-Silver Anniversary, 25 Glorious Years Conducting This High Komatsu BR380JG Jaw Crusher, Moxy MT40, Komatsu PC400LC, NPK Hammer, Quality Sale.. THE 25TH ANNUAL 9-DAY FLORIDA AUCTION: Where the Best Komatsu PC308, Komatsu PC228, Komatsu PC220, Komatsu PC150, Komatsu PC138, Equipment is the Norm, not the Exception. The Greatest Auction On Planet Earth. Cat 305E, Komatsu D37E, Cat 950H, (2)Timberjack 450 Log Skidders. Primarily selling 2015-2017 Construction, Cat, Komatsu, JD, Case, LinkBelt, Volvo, 14. Saturday, November 4: SYRACUSE, NEW YORK: One-of-a-Kind Sale. The Atlas Copco, Aerial Equipment, Trucks and Trailers. Very Best In Quality Cat, John Deere, Komatsu, Kobelco Construction Equipment, 40. DTBA: UTICA (Poland), NEW YORK: Complete Liquidation. Construction Telescopic & Warehouse Forklifts, Boom & Scissor Lifts, Air Compressors, Welders, Equipment, Attachments, Support, Dump Trucks, Truck Tractors, Service Trucks, Plus Generators, Light Plants, Very Late Model Mack Truck Tractors, Dump Trucks, Service Equipment Trailers. & Pickup Trucks, Aggregate Equipment, Attachments, Support Equipment. 41. DTBA: COLUMBUS (Delaware), OHIO: Late Model Rental Returns of Cat, 15. Tuesday, November 7: HOUSTON, TEXAS: Late Model Rental Fleet Cat, John Case, John Deere, Komatsu Earthmoving Equipment, Aerial Lifts, Telescopic Forklifts, Deere, Komatsu Construction Equipment, Aerial Lifts, Forklifts, Trucks, Trailers, Skid Steers, Dump Trucks, Truck Tractors, Equipment & Dump Trailers, Attachments, Attachments, Support. Support Equipment. 16. Friday, November 10: RACINE WISCONSIN: One of the Midwests Finest 42. DTBA: CHICAGO, ILLINOIS: Secured Creditor Auction. Construction & Paving Heavy Haul Transportation Companies: Truck Tractors as new as 2016, Peterbilt, Equipment, Aerial Lifts, Forklifts, Skid Steers, Attachments, Transportation Equipment, Kenworth, Western Star(primarily tri-axle), Large Quantity Specialized Equipment Truck Tractors, Dump Trucks, Pickup Trucks, Equipment & Dump Trailers, Tagalongs.

www.lyonauction.com


Page 136 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LARGE ABSOLUTE AUCTION Complete Liquidation R.A. Monzo Construction Co., Inc. Wed., Oct. 11, 2017 – 9:00AM • Latrobe, PA (40+) Successful Years In The Underground Utility, Sewer and Water Contracting Business (13) Hydraulic Excavators and Attachments • Crawler Loaders and Crawler Tractor • Rubber Tired Loaders, Tool Carriers, and Attachments • 4x4 Extend-A-Hoes and Attachments • Skid Steer Loaders and Attachments • Utility Tractor and 3-Point Hitch Attachments • Rough Terrain Forklift and Aerial Lift • Crawler Paver, Rollers, and Compactors • All Terrain End Dumps • Boring Machine, Augers, and Trencher • Dump Trucks • Truck Tractor and Lowboy Trailer • Service and Utility Trucks • Van Body, Cargo, and Stake Trucks • Pickup Truck and Polaris Ranger ATV • Jetter Truck and Vac Truck • Tag-A-Long and Cargo Trailers • Office and Van/Storage Trailers • Portable Hydroseeder, Straw Blowers, and Chipper • Arrow Board, Air Compressor, and Portable Welders PLUS: LARGE QUANTITY Equipment Attachments • Trench Boxes, Gravel Boxes, and Road Plate • Sewer Inspection Cameras • LARGE QUANTITY Line Stop Equipment and Sewer and Water Pipe Tools • Contractors Tools • Shop Equipment • Concrete Barriers, Pipe, and Construction Materials

Call (800) 233-6898 or Email sales@hunyady.com

Real Estate: (Offered Subject To Owner’s Immediate Confirmation) TERMS: 10% Deposit Sale Day in Certified Funds Settlement Within (60) Days: Location #1: 187 Classic Motors Drive, Stoystown, Pennsylvania 15563 • (10.25 +/- Acres) Includes: 50.5’ x 221.5’ Shop Building • Location #2: 229 Quinn Road, Latrobe, Pennsylvania 15650 • (2 Irregular Shaped Parcels) Includes: 30’ x 60’ Storage Building

For Complete, Descriptive Brochure!

www.Hunyady.com Live Onsite & Webcast

PUBLIC AUCTION OCTOBER 4TH & 5TH – STARTING AT 10:30 AM EACH DAY EXECUTOR’S SALE

• 2 DAYS • 2 LOCATIONS •

• NEW HAMPSHIRE • MASSACHUSETTS •

• GENERAL CONTRACTOR • • CONSTRUCTION EQUIPMENT • • EXCAVATORS • LOADERS • DOZERS • ROLLER • • SCREENING PLANTS • FORKLIFTS • TRUCKS • • BUILDING MATERIALS INVENTORY •

REAL ESTATE (2) PARCELS • MILL BUILDING • ±2 ACRES LAND • ESTATE OF ROBERT B. VAN DYKE D/B/A

VAN DYKE CONSTRUCTION

TO BE SOLD ON THE PREMISES AND BY LIVE INTERNET BIDDING ON THE FOLLOWING DATES AND LOCATIONS

CONSTRUCTION EQUIPMENT 58 (US ROUTE 202), RINDGE, NH TO BE SOLD ON THE PREMISES AND BY LIVE INTERNET BIDDING

WEDNESDAY, OCTOBER 4TH

BUILDING MATERIAL INVENTORY • REAL ESTATE 54 MECHANIC STREET, WINCHENDON, MA TO BE SOLD ON THE PREMISES AND BY LIVE INTERNET BIDDING

THURSDAY, OCTOBER 5TH

H

LIVE ONSITE & LIVE ONLINE BIDDING AVAILABLE AT WWW.BIDSPOTTER.COM

H

SEND FOR DESCRIPTIVE PICTURED BROCHURE OR VISIT OUR WEB SITE AT: WWW.POSNIK.COM 1% BROKER INCENTIVE OFFERED ON REAL ESTATE! SALE PER ORDER OF EXECUTOR AND BY MANAGER OF PROPERTY OWNED BY BARKLEY LINCOLN AVENUE REALTY, LLC ATTORNEY JOHN HUGHES OF THE FIRM OF MCLANE-MIDDLETON, 900 ELM STREET, MANCHESTER, NH ATTORNEY FOR EXECUTOR TERMS OF SALE: REAL ESTATE: $5,00000 DEPOSIT CASH OR CERTIFIED CHECK FOR EACH PARCEL 8% BUYER’S PREMIUM APPLIES PERSONAL PROPERTY: 25% DEPOSIT CASH OR CERTIFIED CHECK 15% BUYERS PREMIUM APPLIES ON ALL ONSITE PURCHASES 18% BUYERS PREMIUM APPLIES ON ALL ONLINE PURCHASES OTHER TERMS TO BE ANNOUNCED AT TIME OF SALE INSPECTIONS AT BOTH LOCATIONS: TUESDAY, OCTOBER 3RD – 10:00 AM TO 4:00 PM & MORNINGS OF SALE – 8:30 AM TO 10:30 AM

Aaron Posnik

West Springfield, MA • Philadelphia, PA 413-733-5238 • 610-853-6655

AUCTIONEERS • APPRAISERS

MA Auc Lic #161 • PA Auc Lic #AY000241L

TOLL FREE 1-877-POSNIK1 • (767-6451)

Web: www.posnik.com • Email: info@posnik.com

PA Auction License No: AY000281 While information is believed to be accurate, all items will be sold “As-Is, Where-Is” without guarantee or warranty. A physical inspection is suggested.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 137

P

T

SOUTHERN PA CONTRACTORS AUCTION Friday, October 13th, 2017 @ 9:00 AM 400 Old US Route 15 • York Springs, PA 17372 PARTIAL LISTING - NEW ITEMS ADDED DAILY TRACKLOADERS: ’04 CAT 963C a/c, gp bkt, 70% u/c, 18504 hrs, S/N BBD492; 01 CAT 963C a/c, gp bkt, 70% u/c, 18273 hrs, S/ 2DS1559; CAT 963 lgp, Orops, gp bkt, good u/c, S/N 21202810; ’97 CAT 963B Erops, gp bkt, 3rd valve, all new u/c, 9000 hrs, S/N 9BL2062; ’06 CAT 953C a/c, gp bkt, all new u/c, 7900 hrs, S/N BBX2678; ’02 CAT 953C Erops, heat, a/c, gp bkt, good u/c; ’90 CAT 953 Orops, gp bkt, good u/c, S/N 20203443; CAT 953 Orops, gp bkt; ’89 LIEBHERR 631B Erops, heat, like new u/c, gp bkt. DOZERS: ’06 CAT D6R lgp, a/c, 65+ tilt, 60% u/c, 12000 hrs, S/N WRG594; ’08 JD 750J lgp, a/c, pat bld, 75% u/c, 8700 hrs, S/N 168012; ’05 JD 650J xlt, Erops, heat, a/c, 6 w bld, vg u/c, 18” pads, S/N 113819; JD 650H lgp; CAT 85G XL Orops, aux hyd, pat 6 w bld, good u/c; ’96 CAT D5C III lgp, Orops, 6 w bld, good u/c; CAT D3B L w/winch, 6 w bld, good u/c; CAT D8K 20’ grouser pads, like new cat rollers.

ccc{ O]PG <G ;G >{ <RO STATEMENT OF OWNERSHIP, MANAGEMENT AND CIRCULATION Required by 19 USC 3685 Title of publication: CONSTRUCTION EQUIPMENT GUIDE NORTHEAST EDITION; Publication Number: 1058-787X; Date of filing: Sept. 21, 2017; Frequency: Bi-weekly, 26 issues annually; Annual Subscription price: $65.00; Complete mailing address of known office of publication: 470 Maryland Dr., Ft. Washington, PA 19034; Publisher’s general business office: 470 Maryland Dr., Ft. Washington, PA 19034; Publisher’s name and address: Edwin M. McKeon, Jr. 470 Maryland Dr., Ft. Washington, PA 19034; Editor in Chief: Craig Mongeau, 470 Maryland Dr., Ft. Washington, PA 19034; Owner: CONSTRUCTION EQUIPMENT GUIDE NORTHEAST EDITION, 470 Maryland Dr., Ft. Washington, PA 19034; Edwin M. McKeon, Sr. 470 Maryland Dr., Ft. Washington, PA 19034; Edwin M. McKeon Jr., 470 Maryland Dr., Ft. Washington, PA 19034; Joseph McKeon, 5875 N. Lincoln Ave. Suite 227, Chicago, IL 60659; Richard McKeon, 6060 Piedmont Row Dr. South Ste 555, Charlotte, N.C. 28210; Known bondholders, mortgages, and other security holders: None, Issue date for circulation data below 09/20/17; Extent of circulation (Average number of copies during preceding 12 months): Net press run 22,990; paid circulation through agents 812; through mail subscription 21,916; free distribution 0; total distribution 22,728; copies not distributed 262; return from news agents 0; Total 22,990; Percent Paid and/or Requested Circulation 100%; Actual number of copies for issue published nearest to filing date: Net press run 23,174; paid circulation through agents, 800; through mail subscription, 22,044; free distribution, 0; total distribution, 22,844; copies not distributed, 330; return from news agents, 0; Total 23,174; Percent Paid and/or Requested Circulation 100%. I certify that the above statements made by me are correct and complete. /s/ Edwin M. McKeon, Jr., President/CEO

EXCAVATORS: ’10 HITACHI ZX 350, a/c, 13’ stick, 54” bkt, 80% u/c, 7792 hrs, S/N 920470; ’03 CAT 330 CL Erops, heat, a/c, long stick, 60” bkt; JD 270 C lc, Erops, heat, a/c, 3rd valve; (2) KOMATSU PC 228 us, zero tail swing, plbd, aux hyd, 1 owner; KOMATSU PC 228 LC 2, long stick cab fire damage; KOMATSU PC 200 lc 6, Erops, heat, a/c, thumb, good u/c, 32” pads; CAT 235B Erops, heat, long stick wide pack; CAT 315 CL Erops, heat, a/c, long stick, aux hyd; ’07 CAT 314C lcr, clean, long stick hyd coupler, frt bld; CAT 312 BL Erops, heat, a/c; (2) CAT 312 B’s, Erops, heat, A/C; ’10 JD 120D; ’98 HITACHI EX 120-2 36” bkt, thumb, plbd, 60% u/c, 6604 hrs, S/N 1ZN38467; JD 60D Erops, heat, a/c, hyd thumb; ’07 JD 50D Erops, heat, a/c, aux hyd; ’07 TAKEUCHI TB 175 Erops, heat, a/c, hyd thumb, frt bld; ’14 TAKEUCHI TB 138 FR Orops, aux hyd, swing boom 515 hrs; TAKEUCHI TB 125 Orops, aux hyd, frt bld; BOBCAT 442 Erops, heat, a/c, aux hyd, frt bld; BOBCAT 430 2TS Orops, aux hyd, frt bld.

Erops, heat, a/c; JD 2014 323E Erops, heat, a/c; JD 328; ’07 JD 325 Orops, aux hyd, 78” bkt; ’11 JD 322D Orops, aux hyd; ’06 JD CT 322; JD 325 SS dsl; JD 250 Orops, aux hyd; JD 7775 Orops, aux hyd; ’07 CASE 440 CT; ASV RC 30; ASV RC 50; ’12 BOBCAT S770; ’06 BOBCAT S250 Orops, aux hyd, 12-16.5 rubber; (2) ’12 JD 319 D’s, Orops, aux hyd; ’04 BOBCAT S175; ’06 MUSTANG 2054; GEHL SL6635; GEHL SL5635. SKIDLOADER ATTACHMENTS: 4 – OKADA AMERICA TOP 35 hyd hammers, fits skid loaders & mini exc; KENT FURAKAWA F6 hyd breaker; ALLIED 12000 lb breaker fits mini exc; JCB HM 165Q hyd hammer fits 8000 lb machine like new; JCB hm 265Q hyd hammer fits 10000lb machine, like new; TAKEUCHI 4’ skdldr bkt; TAKEUCHI gp skid ldr bkt; BOBCAT 80” & 78” skidldr bkt; JD 78” gp w/boce skidldr bkt; JD GS 78” grapple bkt; 2 – BOBCAT 48” skdldr forks; GY rubber tracks for 12x16.5 tires; (2) sets loggering tracks, 1 fits 10x16.5, 1 fits 12x16.5; BRADCO 11MD2 backhoe att w/seat outriggers, fits nh machines; CASE D100 backhoe att, outriggers, seat, fits sr 175 or smaller machines; BOBCAT sweeper bkt broom; BOBCAT Rockhound. OFF ROAD TRUCKS & MOTOR GRADERS: ’91 JD 770 B, Erops, heat, 14:00x25 rubber, 14’ mold board, scarifier, p shift, S/N 533408; JD 570A, Erops, heat, JD dsl, 12’ mold board, frt scarifier, S/N 2047. COMPACTION: ’00 IR SD 115 roller, 84” smooth drm w/pad foot kit; IR DD 90 HF, S/N 156230; BOMAT BMP 8500 trench roller, dsl w/remote; HYSTER C530 roller, Orops, 9 whl rubber tires, S/N A91C1551; IR D022 38” dbl drum vib roller, Deutz dsl, water sys, S/N 165695. FORESTRY: CAT 525C Erops, a/c, winch, grapple, frt bld; like new Grace tree hyd shear, fits Cat 299D skidldr; MOBARK Tornado 13 trl mtd, 15” chipping cap.

RUBBER TIRE LOADERS: ’04 CAT 938 G cab, heat, a/c, gp bkt; ’06 CAT 930G; ‘JD 744H Erops, heat, a/c, gp bkt, 26.5 R 25 rubber; ’00 JD 624H Erops, heat, a/c, 3rd valve, high tip bkt, good rubber; JD 544K; JD 544E Erops, heat, gp bkt; ’93 JD 544G Erops, heat, 3rd valve, 20.5x25 rubber, 1 owner, S/N 541346; CASE 621; ’05 JCB 426 HT, Erops, GP bkt, 3rd valve; MICHIGAN 75C Erops, heat, 20.5x25 rubber; ’90 FIAT ALLIS FR10B; ’05 VOLVO L35B Erops, heat, a/c, 3rd valve; ’08 CAT 904B Erops, heat, a/c, gp bkt; KUBOTA R420S, Orops, gp bkt, aux hyd, good rubber, S/N R420S 10232.

PAVING: LEEBODY 8500 T asphalt paver; BLAW KNOX pf1000 road widener Cummins dsl; LEEBOY L1000 t Dutz dsl; IR DD22 dbl drm Orops; BOMAG BW 120 AD dbl drum.

TRACTOR LOADER BACKHOES: CAT 530D Erops, heat, a/c, 4x4, ext hoe, pilot ctrls, low hrs; ’08 JD 410J Erops, heat, a/c,4x4, ext hoe, pilot ctrls; ’96 JD 310D, 4x4 cab, e hoe, 2 bkts, 1 owner, svc records since new; ’96 JD 310D turbo, 4x4, Erops, std hoe; JD 300D Erops, 2x4, std hoe, gp bkt, S/N 792310; JD 4200 Orops, aux hyd, 3 pt hitch, loader, rear 3 pt, backhoe att, good rubber, S/N 322860, low hrs; ’08 CASE 580 SM turbo, Erops, heat, a/c, 4x54, ride ctrl, aux hyd; ’99 CASE 590 sl Erops, heat, 2 wd, ext hoe, gp bkt, S/N JJG0210893; CASE 580C Orops, std hoe, gp bkt, S/N 8979147.

ROAD TRACTORS: ’99 MAGNUM TT 100 yard jockey, Cummins dsl, auto, 11r 22.5 rubber.

LARGE MISC: (2) FELCO bedding conveyer; ’99 VERMEER V3550A w/backhoe bld; DITCH WITCH DW 410 Orops, dsl, trencher, bld; ’05 CAT LC6 gen set, Cat 3456 dsl, 455 kw, skid mt, fully contained, S/N CVG00361; MULTI QUIP 70 gen set, 119 hrs, Cummins dsl; IR 750 Air comp, trl mtd, Cummins dsl; AIRMAN PD 375S air comp, Isuzu dsl.

DUMPS: ’14 INTERNATIONAL PRO STAR T/A dump, 15’ steel body, 430 hp, 10 spd trans, pintle hitch, PA inspect, 240K mi; ’10 MACK Pinnacle CXV613 TRI/S dump, Mack dsl, 10 spd, 16’ steel body, 338K mi; ’05 MACK CV717 granite Tri/a dump, 427 Mack, 10 spd, maxitorque; ’06

SALE CONDUCTED BY

SKIDLOADERS: New KUBOTA 2016 SLV 95-2S Erops, fully loaded; ’14 KUBOTA SVL 90-2 Erops, high flow; CAT 262B Orops; CAT 257 B high flow, aux hyd, gp bkt; ’08 CAT 247 Bz, Erops, heat, aux hyd; ’14 TAKEUCHI TL 10 Erops, heat, a/c, 2 spd, S/N 20100953; ’14 GEHL RT 210 Erops, heat, aux hyd, gp bkt, S/N 20733; ’13 JD 329E; ’12 JD 329D

www.wolfeauctions.com

GMC T7500 alum dump body, allison at, isuzu 7.8 dsl, air brk, 94k mi; ’04 STERLING Cat C7, push button auto, crew cab, pwr angle plow, salt spreader, 9’ alum body, central hyd; ’04 FORD F450 cont dump, dsl, auto, 4x4, 9’ cont dump body; ’03 FORD 650 S?A dump, Cat dsl, allison auto, 12’ body; ’02 STERLING cat 326, 250 hp, push button auto, 10’ steel gallion, central hyd, plow prep, tarper; ’02 IH 2574 S/A dump, Cummins dsl, ef 9 spd, godwin ss body, I-pac, tarper, central hyd, plow; ’95 IH 4900 S/A dump, DT 466, 7 spd, 11R 22.5 rubber, 133k mi; ’90 RD 688 Tri/a dump, 13 spd, 350 mack, alum body, floaters on frt; ’88 IHC Eagle Tri/a dump, steel body, 350 cummins eng, 15 spd deep reduction trans. SPECIALTIES: ’12 HINO 258 J08-BC hino dsl, allison auto, alcoa whls, under cdl, 22’ steel body Jerr dan, alum side rails, under boxes, wheel lift; ’11 FORD F650 rollback, Cummins dsl, allison auto, XLT, pro loader, ab, alcoa whls, under cdl, 21’ steel body, alum side rails, under body boxes, wheel lift; ’07 PETE 335 fuel lube, 300 Cummins, 6 spd, allison auto, 33,000 gvw, 280K mi; 1000 gal curry body, 4 oil product tanks, waste oil tank hyd drive air comp, bulk grease sys; ’05 STERLING T/A vac trk, Mercedes dsl, allison auto, ab; ’03 IH bridge x ray trk, dt 466, allison auto, crewcab, altec unit. CAB & CHASSIS: ’93 HINO FD 2218 dsl, auto. BOX TRUCK: ’06 CHEVY E3500 box body, gas, auto, 12’ box, rec hitch, cab to rear access door. FLATBEDS: ’04 IH 4300 dt 466, 6 spd, ab, 24’ steel body, under body bxes, 6 roller straps on rails, stake pockets, alcoa whls, 630” wb; ’02 CHEVY 3500 masonry body trk, duramax dsl, allison auto, 4x4, lt pkg, crewcab, 10’ body, ladder racks; ’01 CHEVY 3500 HD flatbed, gas, auto, 13’ bed, under body bxs, lift gate. UTILITIES: ’10 FORD F250 gas, auto, 4x4, knapheide body; ’08 DDOGE Ram 2500, cummins dsl, auto, 4x4, crewcab, pa inspect, 135k mi; ’05 CHEVY 3500 duramax dsl, allison auto, largo util body, ladder rack, 4x4; ’04 FORD E450 cut away ut, gas, auto, 14’ Body; ’05 GMC 3500 util, gas, auto, 4x4, 90k mi, 30000 lb crane, reading body. PICKUPS: ’06 FORD F350 V10, 6 spd, lariat, ext cab, 4x4, 8’ bed; ’05 GMC 2500 duramax dsl, allison auto, 4x4, 8’; ’04 FORD F350 dsl, auto, 4x4, crewcab, 8’ bed; ’03 CHEVY 2500 hd gas, auto, 4x4, fisher plow & salt spreader. VEHICLES: ’05 FORD Explorer gas, auto, 4x4, leather, 4 dr. TRAILERS: EAGER BEAVER 50 Ton detach; ’89 BORCO lowboy; ’97 RODGERS CP 35 detach 35 ton, air ride, 24’ 5” deck, frt ramps, 255-70R 22.5 rubber; ’97 VIKING 35 ton low boy; ’06 Ntowmaster t29 25900 GVWR 10 ton cap; ’11 PEQUEA trl, tow behind w/ramps; ’02 KAUFMAN GN 6 ton; T/A 550 gal water trl, w/pump. TERMS OF SALE: Complete Payment on Sale Day with CASH or CASHIERS CHECK. Company or Personal check accepted only if accompanied by a "Current Bank Letter of Guaranteed Payment". Credit Cards accepted - a 5% administrative fee charged on all noncash/non-check purchases. *BUYERS PREMIUM of 10% on each lot $3,500.00 and under. On each lot over $3,500.00 there will be a $350.00 per lot fee. PRESALE INSPECTION: Thursday Oct 12th - from 10:00 to 5:00.

301-898-0340 9801 Hansonville Rd, Frederick, MD 21702 PA # AY-000206-L


Page 138 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 139


Page 140 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

KISSIMMEE, FL

WHY NOT COME VISIT US AT DEMO ICUEE EXPO 2017

654 West Southport Road

OCTOBER 3rd - 5th

BOOTH 2551

Wednesday Oct, 25th 2017 @ 9.00am

Kissimmee, FL 34746

T. +1 407.396.6060 License Number AU-C003078

13-14 Caterpillar 320EL - choice

2014 Volvo EC220DL

Unused 2017 Bobcat E85

2011 Caterpillar 308DCR - choice

2009 Caterpillar 730 - choice

2009 Caterpillar 963D

2007 John Deere 670D

Unused Caterpillar 908M - choice

2014 Caterpillar TH417GC

2007 Ingersoll Rand SD105F

Unused Dynapac CC1200

Unused Barford R6536TR Radial Stockpile 65ft x 36

For more information contact: Steve Watson: 678-340-5831 Scott Hinchey 307-439-9230

Peter Clark: 419-356-4612

Kevin Teets: 304-266-2955

Kevin Pittman: 419-654-5462 Daryl Houle: 603-856-1689

Visit our website for view full inventory

www.yoderandfrey.com

Officials Hope to Break Ground on Modernization Project in 2019 TRUCK, TRAILER RAILER & EQUIPMENT QUIPMENT AUCTIO UCTIO ON

Fridayyy,, Oct Oct 20th 20th 8:30 8:30 AM AM Marietta, Mariett Mariett ttta, ta a, P PA A

Man Optio y n Sellin s for g You r Equip pmen t!

Still S till A Acce cce epting pting C Consig o nsi gn n nments! Selling Absolute! s ! i g ratin Celleeb ear Y 0 our 1 ary! ivers Anniv

See S e e FFull ul l IInvento nvven to orryy a att ww www www. w.hessau hessau uctioneers.net TRA RAC ACTORS RS, TRUCK KS, DUMP PS S, TRA RAILE AILLERS RS S, PIC ICKUPS CKUPS PS, SERV RVIC VIC CE TRUCK UC CKS, RV V S, A ATTV T V S, LG SEL LG ELLEECT CTION OF NEW SK KIID D LOA ADER ER ATT TTTACHMEN ACHMEN ACHMEN NTS TS/IMP IMPLE PLEMENT MENTS, LAND ANDSCA SCAPE CA APE STONE NE Tur u n Your Excess Equipment into Cash! All Units must be On Site by 10/9/17

1-866-511-2493

www.HessAu www ww ww w.HessA sAu uctioneers.net uct tioneers.net Email: Sales@H HessAuctioneers.com Auction Site: 1451 Riverr Rd. Marietta, P PA A 17547 PA P A Auctio i n Co. # A AY2025/AH1856/VB1159 Y2025/AH1856/VB1159

MODERNIZATION from page 8

has made great strides in the last few years and this project will help to accelerate that momentum.” The plans also call for a new parking garage and eliminates critical points of failure like the train and baggage delivery system. A new, expanded security checkpoint will help move passengers more quickly and efficiently through the security process. A redesigned terminal also will enhance concession revenue opportunities both before and after security. “We are excited to make this Pittsburgh’s airport — a facility that is optimized for the needs of the local passenger and today’s aviation environment. This facility gives us the ability to truly make this the gateway to our region and continues our ascent as industry leaders,” said Christina Cassotis, Allegheny County Airport Authority CEO. “This is about being much more operationally efficient with a technology focus to position us for the future.” The Authority has worked with its airline partners for the past three years in drafting a

master plan, which all airports are required to file with the FAA. As officials work through the process, designs or plans could change. Patrick Bowes, chairman of the Airport and Airline Affairs Committee at Pittsburgh International and manager of Corporate Real Estate at American Airlines, said “Right-sizing and modernizing PIT is the right path forward. Through a highly collaborative process with the airport, we look forward to working closely with ACAA in refining its proposal and doing the right thing for this airport, the airlines and all of our customers.” The Authority will hold informational workshops for the public in the coming months as well as launch a dedicated website tied to construction updates and information about the project. The project is not expected to have a major impact on current operations and passengers will not experience major changes or disruptions during the project. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 141


Page 142 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 143


Page 144 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ritchie, IronPlanet Strive to Deliver Choices to Customers After years of competing, Ritchie Bros. and IronPlanet realized it was best to work together to provide a unified set of solutions allowing customers to buy, sell and list equipment when, where and how they want — whether onsite or online. Ritchie Bros. has been a leader in the auction business for decades, starting its operation in Canada in 1958 and expanding around the world. The company sells more than $4 billion of equipment each year. IronPlanet launched in 1999 and since its inception was determined to find areas of the market it believed Ritchie Bros. wasn’t serving effectively, as its basis for competing with the category leader. This quest led IronPlanet to focus more on sale frequency with its flagship weekly online auctions, in addition to offering reserved and sector-specific marketplaces. “Ritchie Bros. was a formidable competitor, we had to be nimble and look for ways to compete creatively,” said Jeff Jeter, former president of IronPlanet, now president of Ritchie Bros.’ U.S. sales team. “We had tremendous respect for Ritchie Bros.’ onsite unreserved auctions and what the company had done to bring credibility and trust to the auction channel. We had to find the white space and go compete.” At IronPlanet, its online auctions supported customers that didn’t want to transport equipment to sell it, and the frequency of its weekly events meant customers didn’t have to wait for the next live auction. IronPlanet also offered a controlled price marketplace and entered into new sectors with dedicated marketplaces like GovPlanet. It found its niche and was a tough competitor for Ritchie Bros. for years. “We thought about the market opportuni-

ty similarly to Ritchie Bros., but developed different solutions,” said Jeter. Understanding the complementary value IronPlanet was providing customers and an innovative vision of new ways they could join to help customers, Ritchie Bros.’ CEO Ravi Saligram approached IronPlanet CEO Greg Owens, outlining how the two companies would be best together. Led by Saligram, Ritchie Bros. completed the historic acquisition of IronPlanet in May of this year. “During integration planning we discovered how much we truly had in common with Ritchie Bros. — we had a shared vision of driving value for customers, regardless of channel,” said Jeter. “If you look at the used equipment market, auctions are a small portion of the transactions happening around the world each year. Together we are constantly thinking about ‘how do we drive value for customers in a broader asset management and disposition model?’” For Jeter, the number of platforms available with the combined company, including onsite unreserved auctions; weekly online featured auctions; and a reserve price marketplace, equates to a total selling solution for customers. “Now we are acting as a trusted advisor, with a much more consultative approach to selling,” said Jeter. “Previously, I would have probed and asked a customer about his or her needs and what motivated them, but at the end of the day, at IronPlanet, I didn’t have the total toolset. Regardless of what the customer said, I was going to serve up what I had. Today, that’s very different — we have a solution for every equipment disposition need.” “Our goal now as trusted advisors is to

maximize recovery for our customers on the assets they are selling, regardless of channel. If I have a client that comes to me tomorrow in Atlanta, they’ve missed that onsite event and they need to sell it quickly, OK, let’s start inspecting the equipment. I can sell it in two weeks on the IronPlanet weekly featured auction and I can turn that asset into cash in four or five weeks versus having to wait another couple of months for the next Atlanta sale. We are now able to be a trusted advisor and consultant to clients.” This type of consultative selling is already helping customers across the country. “We already have many customers trying new sales channels they never had before, often splitting a package of equipment across multiple Ritchie Bros. platforms. They may be selling some equipment in an onsite auction happening tomorrow, some assets that sold online a few weeks ago through our weekly featured auction and even a couple items they want more price control on selling in our Daily Marketplace. It really comes down to the needs of the customer and what is the best way to maximize returns for their assets.” Simultaneously, Jeter and the Ritchie Bros. team are innovating to help make the buying process easier for customers. “We are constantly looking at ways to make finding and buying equipment easier. One of the first things we are working on is combining all available assets into one searchable platform because at the end of the day, bidders are looking to purchase an asset independent of channel. Some may like auctions, others might like ‘Buy Now’ or a fixed price, but when you start shopping for something you really are just shopping for an asset for a need. Now, regardless of what

marketplace we have an asset in, you get visibility in your search for those assets, regardless of channel. This is a huge benefit to buyers when they are trying to find equipment. It’s effectively making us one of the largest stores in the world for shopping for construction, transportation, oil and gas, mining, agriculture, and other industrial assets.” At any given time, the newly combined company may have tens of thousands of items available for purchase. “We sell hundreds of thousands of assets across many different sectors each year, including additional oil & gas assets being sold through Kruse Energy Auctioneers, government surplus assets through GovPlanet and thousands of trucks through TruckPlanet. Thinking about the future, we see these other asset classes including government equipment, trucks, oil and gas and agriculture as another vector of growth for us outside the core construction that both companies have been in for many years.” So, what’s next for the combined company? Jeter says customers should start thinking about the company differently as they work to become a true trusted advisor, helping customers make decisions based on datadriven insights. “We need to get our customers comfortable with our total solution set across our online and onsite auction platforms, including how data can help inform their equipment disposition decisions such as which selling channel to use when. We aspire to be their trusted advisor for all things related to used equipment disposition.” CEG (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Topcon Updates Its Deformation Monitoring System Topcon Positioning Group has announced updates to its Delta Solutions deformation monitoring system, including software management improvements and advanced modular configurations. “Since the launch of Delta Solutions at Intergeo 2016, we have seen many systems installed and successfully operated across Europe and North America,” said Ian Stilgoe, vice pres-

Delta Watch features new configuration choices employing either robotic total stations or GNSS with the ability to add leveling sensors.

ident Europe GeoPositioning Solutions of Topcon Positioning Group. “Now, to build on that success, we are implementing new features for a more comprehensive package that facilitates ease of use.” Delta Watch features new configuration choices employing either robotic total stations or GNSS with the ability to add leveling sensors. “An additional module is available to enable all three sensor types to be combined into a single deformation monitoring system. Whatever the Topcon sensor combination, these can be computed within one combined network adjustment solution,” said Stilgoe. The system now also includes a new optional rail monitoring module. “This new feature is designed specifically

for rail deformation monitoring activities to provide the creation of virtual sensors such as cant and twist measurement or track alignment and displacement.” Delta Watch also features a new monitoring system diagnostics module designed to allow operators to check the performance and health of the internal monitoring system hardware for operational troubleshooting and the planning of any maintenance requirements. Operators now also have a choice of using either metric or U.S. survey units as the default values in the software. For more information, visit topconpositioning.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 145


Page 146 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX ESCO CORP ..........................................................114

NORRIS SALES CO INC ..........................................12

NEW HAMPSHIRE

FIVE STAR EQUIPMENT INC ..................................46

NPK CONSTRUCTION EQUIPMENT INC................69

AARON POSNIK AUCTIONEERS & MASACHUSETTS 10/4-5 ..........................136

FLUID CONTROL SERVICES ..................................54

OPDYKE INC ............................................................36

ACTIVE HEAVY DUTY COOLING ............................35

FLUID POWER........................................................130

PAVEMENT RECYCLERS/BAGELA USA ..............102

AIM ATTACHMENTS ................................................64

FOLEY INC..................................................................9

PENN JERSEY MACHINERY ....................................5

ALEX LYON & SON INC

FRALEY CONSTRUCTION MARKETING ................38

PERKINS ENGINES COMPANY LIMITED................59

PLAN AHEAD CALENDAR ..........................135

GARDEN STATE ENGINE & EQUIPMENT ..............66

PETERSON PACIFIC CORP ..................................122

CAPE COD MA 10/14

GEHL ......................................................................123

PINE BUSH EQUIPMENT CO ..................................25

MONTREAL CAN 10/21................................138

GENSCO EQUIPMENT CO LTD ..............................66

PIRTEK USA ............................................................35

SPARTANBURG SC 10/19-20 ......................139

GEORGE & SWEDE SALES & SERVICE ..............32

PLASTERER EQUIPMENT CO INC ..........................6

IOWA CITY IA 10/25, AUBURN ME 10/27....141

GOMACO CORP ....................................................100

RANSOME CAT ..........................................................2

GOUVERNEUR NY 10/28

H O PENN MACHINERY CO INC ............................17

RANSOME EQUIPMENT SALES LLC/LRH............133

ROCKFORD IL 11/2 ......................................142

HALE TRAILER BRAKE & WHEEL ..........................18

RAYCO ......................................................................50

MIDDLETOWN NY 11/3

HARTER EQUIPMENT INC ......................................19

RITCHIE BROS AUCTIONEERS ............................148

SYRACUSE NY 11/4 ....................................143

HESS AUCTIONEERS LLC

ROAD BUILDERS MACHINERY & SUPPLY ..........130

RACINE WI 11/10, SYRACUSE NY 11/11 ....145

MARIETTA PA 10/20 ....................................140

ALEX PARIS CONTRACTING CO INC ....................23

HINIKER ..................................................................129

ALL ISLAND EQUIPMENT CORP ..............................7

HITACHI CONSTRUCTION MACHINERY ..............105

AMERICAN EQUIPMENT LLC..................................54

HOFFMAN EQUIPMENT INC ..................................22

ASPHALT CARE EQUIPMENT INCORPORATED ..94

HUNYADY AUCTION COMPANY

ROADTEC ................................................................89 ROB’S TOWING ........................................................48 ROSCO MANUFACTURING ....................................93 SAKAI AMERICA INC ..............................................101 SDLG ......................................................................127

ATI CORPORATION ..................................................34

LATROBE PA 10/11 ......................................136

BARGAINS ..............................................................131

HYDREMA US INC....................................................85

BASCHMANN SERVICES INC ................................41

HYUNDAI CONSTRUCTION EQUIPMENT ............112

BELL TRUCKS AMERICA INC ............................77,81

J D EQUIPMENT ......................................................60

BEST LINE EQUIPMENT ..........................................30

JCB INC ....................................................................52

BLANCHARD MACHINERY INC ..............................36

JERSEY RENTS........................................................29

BOBCAT COMPANY ................................................56

JESCO ........................................................................3

BOMAG AMERICAS INC ..........................................97

JFW EQUIPMENT INC............................................102

BRANDYWINE TRUCKS & EQUIPMENT CO ..........48

JOHN DEERE............................................................73

CALDER BROTHERS CORPORATION....................99

JOHN DEERE SKID STEER ..................................108

CEG SCALE MODELS ..............................................67

KOMATSU AMERICA CORP ....................................79

CEG WANTED ........................................................133

KOMATSU NORTHEAST ..........................................37

TRENCH SHORING SERVICES ..............................40

CHADWICK-BAROSS INC........................................58

KUBOTA ..................................................................115

TRENCHTECH ..........................................................39

CLASSIFIEDS ........................................................132

LABOUNTY MANUFACTURING INC ......................111

VOLVO COMPACTION..............................................88

CLEVELAND BROTHERS EQUIPMENT CO ..........26

LEEBOY ..............................................................94,95

VOLVO CONSTRUCTION EQUIPMENT-NA ............74

COMPANY WRENCH................................................43

LIEBHERR ................................................................49

VOLVO FINANCIAL SERVICES................................83

CONSTRUCTION EQUIPMENT GUIDE 70,86,117,124

LINK-BELT EXCAVATORS ........................................64

WACKER NEUSON ................................................106

CURRY SUPPLY CO ................................................46

MESSICK’S ..............................................................16

WEACO ....................................................................16

DEACON EQUIPMENT CO INC ..............................64

METSO MINERAL CRUSHING............................60,61

WESTCHESTER TRACTOR INC..............................30

DITCH WITCH EQUIPMENT CO ..............................63

METSO MINERALS SCREENING ..................120,121

WIRTGEN AMERICA ................................................90

DRESSTA NORTH AMERICA ................................109

MIDLANTIC MACHINERY ........................................13

WOLFE INDUSTRIAL AUCTIONS ..........................137

EAGLE POWER & EQUIPMENT CORP ................147

MIKE ZYNDORF LLC ................................................42

WOODS CRW CORP................................................21

EDWARD EHRBAR ..................................................10

MILTON CAT..............................................................32

YANMAR AMERICA CORP ....................................103

ELLIOTT & FRANTZ INC ....................................16,40

MUNICIBID.COM ....................................................137

YODER & FREY AUCTIONEERS

EQUIPMENT MART OF NEW YORK........................51

MUSTANG MFG ......................................................110

KISSIMMEE FL 10/25 ..................................140

EQUIPMENT SERVICES LLC ..................................50

NATIONAL ATTACHMENTS ......................................63

YOUR NORTHEAST SITECH DEALERS ................55

SEC EQUIPMENT CORP..........................................38 SHORQUIP SUPPLY INC ........................................31 SILVI CONCRETE ....................................................58 SOUTHEASTERN EQUIPMENT CORP ..................38 ST PIERRE MANUFACTURING CORP..................128 STEPHENSON EQUIPMENT INC ............................11 TAKEUCHI ..............................................................118 TOKU AMERICA INC ................................................54 TRACEY ROAD EQUIPMENT INC ..........................15 TRANSPORT EQUIPMENT SALES ....................33,47

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 4, 2017 • Page 147

w w w. e a g l e p o w e r a n d e q u i p m e n t . c o m

Introducing the New Case CX D Series Excavator

RECENT TRADES

2013 Case 650L Dozer, Stk# 36209, 898 Hrs .................$79,000

2014 Case 850M Wide Track Dozer, Stk# 35273, 417 Hrs ........ ................................................................................................$99,217

2012 Case 821F XR Wheel Loader, Stk# 33403, 2087 Hrs ........ ..............................................................................................$173,359

2013 Case TR270 Compact Track Loader, Stk# 34605, 521 Hrs...........................................................................................$38,062

2014 Kubota KX040-4R1 Mini Excavator, Stk# 37150, 503 Hrs....................................................................................$42,830

2012 Takeuchi TW800C Compact Wheel Loader, Stk# 36115, 1108 Hrs......................................................................$56,400

Authorized Dealer for These Quality Lines: Toro Dingos, Trenchers, Horizontal Directional Drills • Eager Beaver & CAM Trailers • Rammer by Allied Hydraulic Hammers & Shakers • Ring-O-Matic Vacuum Excavation • Airman Portable Air Compressors • Paladin Attachments Planers, Brooms, Buckets •  Trailking Trailers

Frank Beck

Pat DiCicco

Dean J. Leonetti

Jim Lutz

Tom Scott

Rich Verna

Dean R. Leonetti

Brandon Jewell

Key Account Manager Montgomery County, PA

Key Account Manager, Philadelphia County, PA & Eastern Bucks County, PA

Philadelphia County, PA and Eastern Bucks County, PA

Montgomery County, PA and Western Bucks County, PA

New Castle County, DE, Cecil County, MD and Southern Chester County, PA

Chester County, PA and Delaware County, PA

Sales Manager

Toro Dingo Specialist

215/699-5871

610/312-3995

215/870-4546

215/680-9203

215/783-1847

215/870-8567

302/530-9134

610/420-4770

953 Bethlehem Pk (Route 309) Montgomeryville, PA 18936 215/699-5871 Fax 215/699-6416 NEW HOURS Mon.-Fri. 7AM-5:30PM

2211 Dupont Highway New Castle, DE 19720 302/652-3028 Fax 302/652-7540 NEW HOURS Mon.-Fri. 7AM-5PM

55 Senn Drive Eagle, PA 610/458-7054 Fax 610/458-7094 NEW HOURS Mon.-Fri. 7:30AM-4PM


Page 148 • October 4, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Unrreserv rvved ed public equipment auctions Fast, fle ex xible leassing and financing av avai ailable – up to 100%, $0 down

2 – 2015 Caterpillar 950M | North East

2 of 3 – Caterpillar D8N | Pittsburgh

Caterpillar 740 6x6 | Pittsburgh

2013 Caterpillar 32 20EL | North East

2008 Tad Tadano GR500XL 50 Ton Ton | Hou Houston

Liebherr LR1300SX 330 Ton Ton | Des Moines

2 – Caterpillar 815B | Pittsburgh

Liebherr LLTM1160-2 TM1160-2 | Houston Hou

50,690+ items in 120+ auctions including Forrtt Pierre, Pierr SD Chehalis, WA WA Norrth East, E MD Grants Pass, OR Des Moines, IA

Oct 12 Oct 20 Octt 2 24 Octt 26 Oct 27

Minot, ND Houston, TX Bozeman, MT Pittsburgh, PA PA Phoenix, AZ

Novv 7 Nov 8-9 Novv 9 Novv 14 Novv 115

Auction Company License # 1981, MotorVehic Vehicle Dealer License #1539, AuctioneerChad M. Johnson # 17668, Auction Company License #AAY00208L, Y00208L, Auction Business License #AB303, Auctioneer Trevor J. Moravecc # AU3889 OAC. Terms & conditions apply. See rbauction.com

Bid in person or online

Financing & leasing available

▸ No minimum bids or reserve prices ▸ Te Testt and inspectt on-site on▸ Open to the public, free registration

Up to 100% financing, with no money down.

More items added daily Call about selling: 1.800.211.3983

See fu full auction & equipment listing gss at rbauction.com






WINNING. IT’S IN YOUR DNA.

SINCE 1927

SINCE 1948

SINCE 1957

SINCE 1923

SINCE 1916


MAKE THE NUMBERS COUNT IN THE AGE OF SMART IRON, you see technology growing at a rapid rate. And, while you understand how it can help you reduce costs or increase productivity, it’s the kind of investment to weigh carefully. Checking basic telematics information – operating hours, location, fuel consumption and idle time – is one of the easiest ways to reduce operating costs. Cutting idle time, for example, saves fuel and maintenance costs. Showing operators their numbers can be a great way to improve their performance. With Cat® Connect technologies and services, you’ll be able to optimize your entire fleet. With a tap or a click, you can get the numbers you need and make them count on the bottom line.

LOW OIL PRESSURE

Explore how the numbers can help you win at www.NECatDealers.com/connect

OIL PUMP ORDERED

DUMP TRUCK ID: OHT-337

SERVICE TRUCK ID: OHT-584

38%

27% IDLE TIME

GRADING EFFICIENCY CEMENT TRUCK ID: OHT-424

2% FUEL BURN RATE

TRANSPORTER ID: OHT-621

www.NECatDealers.com/connect SINCE 1927

SINCE 1948

SINCE 1957

SINCE 1923

SINCE 1916


FOUR WAYS TECHNOLOGY CAN HELP YOU WIN. Getting more done at the lowest cost is the goal. Seems simple enough, but as we all know the challenges are many. The good news is that in the same way technology has made our lives easier, it can help you find new ways to win on the job.

FEWER PEOPLE GET MORE WORK DONE. Laser- and satellite-guided machines achieve grade and compaction specs without a single grade checker or surveyor. Because technologies like Cat GRADE boost accuracy, jobs are completed faster.

OPERATOR ACCURACY IS BETTER — NO MATTER WHAT THE EXPERIENCE LEVEL. With automated technologies that “assist” with bucket and blade positions, operators are fast and precise across all levels of experience.

which increases productivity and reduces cost.

EQUIPMENT MONITORING IS ONLY A CLICK AWAY.

CAT TELEMATICS DATA

SINCE 1948

Cleveland Brothers

www.clevelandbrothers.com Murrysville, PA 844-569-9650

accidents and near misses and supports safety culture.

delivers real time control over operating costs.

«

Optimize your operation at www.NECatDealers.com/connect

www.albancat.com Baltimore, MD 800-492-6994

CAT PAYLOAD INCREASES load accuracy and consistency,

CAT DETECT REDUCES

Cat & non-Cat asset location, performance, fuel burn and idle time can be checked on any wireless device. Refueling is optimized. Maintenance schedules kept.

Alban CAT

45% faster than manual controls.

SAFETY PERFORMANCE IMPROVES.

Monitoring and detection technologies on both workers and machines increase awareness of hazards on the job so that workers can avoid them.

SINCE 1927

CAT GRADE WITH ASSIST reaches grade up to

SINCE 1957

Foley, Incorporated www.foleyinc.com Piscataway, NJ 732-885-5555

SINCE 1923

H.O. Penn Machinery www.hopenn.com Poughkeepsie, NY 844-CAT-1923

SINCE 1916

Giles & Ransome Inc. www.ransome.com Bensalem, PA 877-RANSOME

© 2017 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. www.cat.com www.caterpillar.com


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.