1
11
THE NEW ENGLAND EDITION
A Supplement to:
95
1
201 16 9
26
2
1 3
91
89
2
95 3
2 2 7
1
93
495
16
89 4
89
Formerly
95
202
7
®
91
9
95
93
2
95 2
93 90
90
7
June 1 2016
95 91
7
495 6 195
395
95 91
3
84 6
84
6
E
q
u
I
P
m
E
N
t
g
u
I
d
E
95
95
Vol. XlIX • No. 11
“The Nation’s Best Read Construction Newspaper… Founded in 1957.” Your New England States Connection • Amanda Hogeboom-merritt 1-800-988-1203 Specializing in:
Demolition, Portable Crushing, Material Sales, C & D Recycling, Land Clearing & 30-115 Yd. Trailers Call for Pricing
Severe Traffic Woes Lead to $270M Spaulding Turnpike Reconstruction
2208 Plainfield Pike • Johnston, RI 02919 401-943-7100 • Fax: 401-647-5041
By lori lovely
www.jrvinagrocorp.com
ceG coRResPoNdeNt
LEED Accredited in Waste Management
GIVE US YOUR HAMMER! •Repairs •Rebuilds •Replacement Parts in Stock
www.foleyengines.com CAT 325L FOR SALE!
30% off same class Ramfos hammer with competitor’s trade in
61 Silva Lane • Dracut, MA 01826
w M.G. Equipment
Call Today (978) 454-3320
Call Phil (413) 427-7171
2016 EZ-Screen 1200XLS
YOUR ONE-STOP HYDRAULIC HAMMER SHOP™ New Hydraulic Hammers. Remanufactured Hammers. Hammer repairs/rebuilding with free area pickup. Hammer toolbits delivered to your site!
New Option Separate 3 Products
CALL 888-81-GORILLA(46745)
6’x5’ Screenbox Works with 1/2 to 1 3/4 Yd. Loaders, 25 H.P. Kohler Diesel Engine, 24” Conveyor Dumps Screened Product 9’ High
WE STOCK RUBBER TRACKS for Over 6,000 Models!
$41,900 plus freight. Other Screeners Available
ArguS INduStrIAl CO. www.ez-screen.com
866-745-5828
*Some restrictions apply
A NJ, TX, WSES U WAREHO
Some Used Tracks Available.
A major project to reconstruct and widen a 3.5-mi. (5.6 km) section of the spaulding turnpike from the north end of the Gosling Road/Pease Boulevard Interchange in Newington, N.H., across the Little Bay Bridges to the dover toll Plaza in dover, N.H., is underway. Additional aspects of the project include rehabilitation and widening of the Little Bay Bridges, rehabilitation of the General sullivan Bridge and reconstruction and consolidation of the interchanges within the project area. From the Start The Newington-Dover Bridge Project on the Spaulding Turnpike due to safety concerns and increased traffic has been under construction for five years. With completion slatcongestion, way back in 1990 the New ed for 2022, this multi-million dollar project is projected to cost a Hampshire department of transportation began total of $270 million dollars by the time it is completed. to study potential improvements to the spaulding turnpike, New Hampshire’s major limited-access Hampshire department of transportation to conduct a study North-south highway linking the seacoast area and I-95 of the section of the spaulding turnpike, the feasibility study with concord via U.s. 4 and with the Lakes Region and was suspended in 1992 to allow completion of the Pease surface transportation Master Plan. It was resumed in 1997 White Mountains via NH 16. Although senate Bill 152-FN-A authorized the New see SPAuldINg page 10
Big Dig Lite? R.I. Plans $595M Highway Cap, But Just Don’t Call It a Tunnel The Project Would Bury a Providence Expressway Beneath a Park-Lined Boulevard By matt O’Brien
• HIGH QUALITY
AssocIAted PRess
• FAST SHIPPING • GUARANTEED TO FIT • UNDERCARRIAGE PARTS • FLATPROOF SKIDSTEER TIRES • RUBBER PADS FOR STEEL TRACKS
888-888-1248
PRoVIdeNce, R.I. (AP) Just don’t call it a tunnel. Rhode Island is seeking federal help to replace a dilapidated highway interchange with a $595 million project that would bury a Providence expressway beneath a park-lined boulevard.
critics warn the project could be another Big dig — Boston’s central Artery project that achieved similar results in 2007 after decades of cost overruns that totaled more than $20 billion. transportation officials consider the comparison offbase because there’s no digging involved. they say the interchange of Routes 6 and 10 needs an urgent fix because see PrOVIdENCE page 4
Page 2 • June 1, 2016 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
THE W.I. CLARK COMPANY Brookfield, CT • Wallingford, CT • Plainfield, CT Call Mark Doty @ 203-823-2316
2008 Ingersoll Rand HP1600WCU
2008 Kubota L5740HST Tractor
2012 Ingersoll Rand XP825WCU
Cummins Power, Dealer Maintained Since New, Great Condition, stk#20097 ......$109,000
C/air, Front Loader & Hydraulics, Rear Hitch, 400 Hrs, Great Condition, stk#22459 ..$35,000
Tier 4 Cummins Power, Dealer Maintained, Excellent Condition, stk#23023 ..........$69,000
2002 John Deere 310SG
2011 Deere 310SJ
2010 John Deere 410J
C/air, 4x4, Ext. Hoe, Front & Rear Couplers, 12 & 24” Buckets, Wobble Sticks, Great Condition, stk#22910 ..........................$42,500
1861 Hrs, C/air, Pilots, Ext Hoe, Front & Rear Hyds, Great Rubber, stk#22596 ..........$80,000
C/air, 1890 Hrs, 4x4, Ext. Hoe, Front & Rear Hyds, 4-1 Bkt, stk#22846 ....................$79,500
2014 Deere 344K
2010 Mauldin 1750C
2013 LeeBoy 8510B
C/air, JRB Coupler, 3 Spool Hyds, Ride Control, 1.4 Yd Bkt, Great Condition, stk#23139 ..........................................$125,000
8-15’ Propane/Electric Screed, Steel Tracks, 1190 Hrs, Good Condition, stk#23151 $26,500
950 Hours, Kubota Diesel, 8-15’ Legend Screed, stk#22923 ............................$105,500
See Our Complete Inventory at www.wiclark.com
Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • June 1, 2016 • Page 3
Featuring Leading Brands
Since 1922
screening and aggregate handling equipment
built to specifications...
your specifications!!! TWO FULL SERVICE LOCATIONS! E. LONGMEADOW, MA
BERLIN, CT
251 Shaker Road • East Longmeadow, MA 01028
1980 Berlin Turnpike • Berlin, CT 06037
(800) 292-6351
(800) 352-4473
www.tylerequipment.com
Page 4 • June 1, 2016 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
Buried Expressway Would Be Concrete Vault, Not a Tunnel PROVIDENCE from page 1
seven of its nine bridges are structurally deficient, and capping the freeway would heal some of the social wounds caused by mid-20th century planners who carved an ugly bypass through once-thriving neighborhoods. Here’s a closer look at the plans: Is It a Tunnel? No, not really, said Department of Transportation spokesman Charles St. Martin. And that’s one of the clearest differences between the Providence idea and blunder-prone projects such as Boston’s Big Dig and Seattle’s ongoing Alaskan Way Viaduct replacement. “We’re not digging into the earth. The highway’s already at the grade it needs to be,” he said. That’s because Route 6 is already depressed, running like a car-filled urban canyon though the west side of Providence. So the plan would be to build a concrete deck, pile dirt onto it and lay surface roads on top. “You can call it concrete vaults, essentially,” St. Martin said of the lower-level throughways. It’ll look like a tunnel when you’re driving through it. The state’s own grant application for federal money calls it “short segments of decked-over tunnels.” Project Cost The estimated cost is $595 million, not including a proposed rapid bus line that could be added later. The state submitted a request for a $175 million federal
NEW ENGLAND EDitioN Founder, Publisher & CEO Northeast Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Main office
Toll Free Fax Web site Editorial e-mail Advertising e-mail
Edwin M. McKeon Sr. Edwin M. McKeon Jr. Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz
470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com
grant awarded to “nationally significant” highway projects. Most of the rest would be paid through the state’s 10-year transportation repair plan that lawmakers passed and Democratic Gov. Gina Raimondo signed this year. That plan was hotly debated because it will raise money by charging big-rig trucks a toll to pass through Rhode Island. Will It Cost More? The project is big by the standards of the nation’s smallest state, but not by the usual definition of a megaproject — one that costs at least $1 billion. But a prominent megaproject skeptic says it fits the profile in other ways. “This is the type of project where the risk of a cost overrun is very high,” said Bent Flyvbjerg, a professor at Oxford University’s Said Business School who reviewed the state’s grant application at the request of The Associated Press. “The planners are a bit optimistic if they think that contingency is going to be large enough,” he said. The Big Dig was originally pitched as a $2.6 billion project but it mushroomed to more than $24 billion. But the fact that no inner-city digging is involved “makes it a heckuva lot easier,” said Virginia Greiman, a Boston University professor of megaprojects and planning. She said such projects can work well as long as planners properly take risks into account. Why Fix It? More than 90,000 trips are made through the 6/10 interchange each day, but its bridges are structurally deficient.
For advertising rates: Contact
Edwin M. McKeon Jr.
215/885-2900 800/523-2200 215/885-2910 e-mail tmckeon@cegltd.com
Toll Free Fax
Amanda Hogeboom-Merritt • New England 518/396-7659 Toll Free 800/988-1203 Fax 315/866-1379 e-mail amerritt@cegltd.com Contact
Kent Hogeboom • New York • New England 315/866-1379 Toll Free 800/988-1203 Fax 315/823-4136 e-mail khogeboom@cegltd.com Contact
Construction Equipment Guide Northeast Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Northeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2016, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
It’s also harmed surrounding neighborhoods such as Olneyville Square, once considered Providence’s second downtown but now one of the city’s poorest districts. “In its present condition and by its sheer size, the brutalist infrastructure of the 6/10 interchange dominates the surrounding urban landscape,” said the state’s grant application. A big element of the plan is to hide that urban chasm and reunite long-severed neighborhoods. The extra space would be a “blank canvas for the city” that could be used for parks or development, St. Martin said. Just a Boulevard? But critics say what the state’s calling a boulevard is really just a decked highway. An alliance of public transit advocates and cost-wary Republicans is calling for the state to ditch the bilevel superstructure plan in favor of a cheaper and simpler boulevard. That could annoy some suburban commuters whose bypass would be reverted back to city roads, but advocates say it could improve traffic flow and leave more room for development. What’s the Rush? Some have criticized officials for rushing through their favored plan without more seriously considering alternatives. One community forum this month grew so heated that Peter Alviti, transportation director had to apologize after berating a critic who accused him of not listening to residents. “Let me tell you something, pal,” Alviti had said as he wagged his finger. “We took every one of the suggestions. We ran them through some of the top experts in the country.” St. Martin said the state had a short time to apply for the federal grant but he said, “this is just the beginning of the process” that will include studying alternatives. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • June 1, 2016 • Page 5
160 Elm St. Unit 1 • Walpole, MA 02081 (508) 660-7600 Fax: (508) 660-7614
www.lhequip.com
Page 6 • June 1, 2016 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
R.J. Poirier Brings Cat 836G Compactor Back to Life R.J. Poirier Heavy Equipment Repair Inc., is a complete machine rebuilding facility, located in Brimfield, Mass. Established in 1983, it is family-owned and operated, providing service to customers in need of heavy equipment repair or rebuild, worldwide. The company, whose staff includes Real Poirier, president; Rick Poirier, master mechanic; and Michael Poirier, computer diagnostic specialist/technician, recently received a call regarding a Cat 836G compactor that had caught on fire in a landfill. The customer requested a quote on the extent of the damage and repair cost. In order for R.J. Poirier Heavy Equipment Repair to provide an accurate quote, they had to bring the machine in and completely dismantle it. The extent of the damage was massive. From the blade to the engine was destroyed; the cylinder was melted; the fuel tank was blown apart; and the steering valve and hydraulic control valve were melted. Also, every wire harness was destroyed; the steel ends were still connected, but the hoses had disintegrated; and the entire cab of the machine was burned and destroyed. R.J. Poirier provided the customer with a quote for a total rebuild, compared to the price of a new compactor. It was determined that it was more cost effective to go with the repair, versus buying another machine. The quote was accepted, and R.J. Poirier immediately began the rebuilding process. The total rebuild took about three months to complete. The extent of the work required meticulous troubleshooting and skilled hands throughout every step. They had to remove the cab, damaged hydraulic pumps, the burned transmission, torque converter, drive shafts, steering cylinders, and hydraulic tank. All new OEM factory cab parts were used to rebuild the machine along with certified Cat hoses and harnesses; the steering pump and implement pump were Cat remains that were flow tested; and a new hydraulic control valve was purchased and installed. Rather than replacing the burned operator cab with a brand new one, it was decided the more cost-effective approach was to purchase a used one from a Cat 988 loader. It was made to match the specs of the Cat 836G that was being rebuilt. This process required installing a wire harness, display, new seat, new heater and air conditioner, glass windows and floor mats. Once the rebuild was complete, a truck arrived to pick it from R.J. Poirier and deliver it back to the customer. Real Poirier obtained his mechanical engineering degree from Wentworth
Institute of Technology in Boston, Mass. When he founded the company, he originally worked for a dealer who primarily used smaller earth-moving equipment. Over the past 20 years, the company has expanded into the heavy equipment arena, specializing in mining, aggregate, large earth-moving machines and waste industry. R.J. Poirier provides the following component repair and rebuilding services: engine; transmission; undercarriage; bucket/blade rebuild; software updates/enhancements; line boring; welding; machining; An overhead view shows the extent of the burn damage. The wiring, hoses and harsee POIRIER page 8
nesses were completely destroyed.
The Cat 836G had to be completely dismantled to determine the extent of the damage.
The wire harness display shows the extent of the damage. The wires disintegrated and blew out of the sockets.
An overhead view shows the new wiring and hoses.
Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • June 1, 2016 • Page 7
Strength and flexibility C Challenging hallenging jjobsites obsites d don’t on’t iintimidate ntimidate a Doo Doosan san ccrawler rawler e excavator. xcavator. H Hydraulic ydraulic p pump ump p performance erformance d delivers elivers ffast, ast, class-leading class-leading ccycle ycle ttimes, imes, w with ith a ssynchronized ynchronized e ngine a nd h ydraulic ssystem ystem tthat hat b oosts e fficiency. IIt’s t’s d esigned to to offer off ffe er engine and hydraulic boosts efficiency. designed iincreased ncreased fflotation lotation iin n ssoft oft ssoil, oil, w while hile p precision recision ccontrols ontrols p provide rovide accuracy accuracy a and nd p power. ower. W Whether hether yyou’re ou’re d digging igging a ttrench, rench, h handling andling b boulders oulders o orr d dumping umping d debris, ebris, tthe he Doo Doosan san ccrawler rawler e excavator xcavator k keeps eeps yyou ou p productive roductive no no matter matter what. what. V isit u s tto os ee w hat D oosan e quipment can can do do for ffo or y yo ou. Visit us see what Doosan equipment you. D Doosan oos an aand nd tthe he D Doosan oos an logo logo aare r e registered regis ter ed trademarks tr ademar ks of of D Doosan oos an Corp. Cor p. iin n tthe he U United ni t e d S States t ates aand nd various var ious other other countries coun tr ies aaround round the the w world. or ld. 116-D028 6 -D 0 28
Au Authorized thor ized Doosan Doos an De Dealer aler
E Equipment quipment E East ast 6 611 S Silva ilva LLane ane • Dracut, Dracut, MA MA 01826 01826 978-454-3320 978-454-3320 • www.equipmenteast.com w w w.equipmenteast.com
Page 8 • June 1, 2016 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
Mass. Firm Completely Rebuilds Fire-Ravaged Cat 836G The Cat 836G was completely rebuilt, loaded up and ready to return home to its owner.
POIRIER from page 6
custom products/applications; and hydraulic cylinder repair. Along with repairs, R.J. Poirier Heavy Equipment and Repair also provides local equipment rentals, salvage parts sales and dismantled machine sales. For more information, call 413/245-3882 or visit www.rjpoirier.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) This is a photo of machine where it burned on the job site, before being transported to R.J. Poirier Heavy Equipment Repair Inc.
The Cat 836G when it was halfway through the rebuild process.
The wire harness was rebuilt with all new wires, sockets and computer systems.
Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • June 1, 2016 • Page 9
EW Sleeper Co., Inc.
391 Loudon Rd. 391 Loudon Rd. 391 Loudon Concord, NH 03302 Concord, Concord, NH NH 03302 03802 603.225.3361 603.225.3361 800.358.6007 800.358.6007 www.ewsleeper.com www.ewsleeper.com
Page 10 • June 1, 2016 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
After 20 Years of Study, Much-Needed Project Gets Moving SPAULDING from page 1
in order to conceptually develop both a short-range plan to address existing safety deficiencies and a variety of long-term improvement options for detailed engineering and environmental studies. From 2003 to 2008 the project team, advisory task force and interested Seacoast stakeholders evaluated a range of reasonable alternatives to identify a preferred alternative to improve long-term mobility and safety along the Spaulding Turnpike between Exit 1 and the Dover toll plaza just north of Exit 6. The 3.5-mi. stretch of the turnpike in this area is characterized by closely spaced interchanges, substandard geometry and shoulder areas and capacity-constrained conditions during the weekday morning and evening commuter periods. Preliminary engineering and environmental studies were completed and a Preferred Alternative was proposed. The Seacoast Metropolitan Planning Organization deemed the need for the Newington-Dover Turnpike improvements a top long-term priority. The first of five contracts saw work on the new channel crossing begin in spring of 2010, almost exactly 20 years after the study began. Purposeful The purpose of this project, which is included in the state’s tenyear-plan, is to improve transportation efficiency and reduce safety problems, while minimizing social, economic and environmental impacts along this section of the Spaulding Turnpike. In addition to linking the Seacoast Region with Concord, the eastern portion of the Lakes Region, and the White Mountains, the Spaulding Turnpike also is part of the National Highway System. Functionally classified as a principal arterial, it is a major commuter route that joins the growing residential areas of DoverSomersworth-Rochester with the industrial and regional commercial centers in Newington, Portsmouth and northern Massachusetts. It is the major artery for freight into and out of the areas north of the Little Bay Bridges and also serves as a
major tourist route. Traffic volumes on the Little Bay Bridges have steadily increased from approximately 30,000 vehicles per day in 1980 to almost 70,000 vehicles per day in 2001, said Keith Cota, PE, chief project manager, Bureau of Highway Design, resulting in high levels of congestion on the bridges and along the turnpike in the interchange areas. Heavy volume during weekday and weekend peak hours results in unacceptable levels of service, with motorists experiencing severe congestion and long delays along this segment of the corridor. Looking ahead, the problem is expected to worsen, with the average daily traffic volume expected to increase to approximately 94,000 vehicles per day by 2025. Future projections indicate that if the turnpike is not improved, weekday traffic congestion will spread to additional hours of the morning and evening, and safety conditions will continue to deteriorate, Cota said. Complicating traffic flow are a number of existing geometric deficiencies such as limited sight distance and substandard shoulder width on the Little Bay Bridges and substandard merge, diverge and weave areas at the interchanges. Many of the traffic maneuvers required to enter, exit or change lanes along this section of the Turnpike contribute to accidents. The existing acceleration, deceleration and weaving sections along the turnpike are inadequate by current design standards, Cota notes. As traffic volume increases, so do accidents, which create long delays in an area where no viable alternate routes exist. Local connectivity for motorists, pedestrians and bicyclists from one side of the turnpike to the other is deficient. This section of the turnpike bisects the residential and recreational areas in Dover and the residential and commercial/industrial areas in Newington, forcing those traveling east and west to maneuver an inefficient and circuitous route on the turnpike. The selected alternative will implement transportation system management improvements such as reusing the General Sullivan
Bridge for pedestrian, bicycle and recreational use. It includes provisions for future rail service, improving bus transit service and instituting other strategies that may reduce vehicle trips along the Spaulding Turnpike, in addition to upgrading the mainline, Little Bay Bridges and interchanges.
Bigger and Better The project will correct safety and capacity deficiencies by expanding the current four-lane capacity along the 3.5-mi. section to eight lanes and reduce the number of interchanges from six to four. By reducing traffic congesThe project will correct safety and tion, interchange reconstruccapacity deficiencies by expanding the tion and consolidation will current four-lane capacity along the 3.5- improve air quality. Recap mi. (5.6 km) section to eight lanes and Travel time during peak The Newington-Dover reduce the number of interchanges from hours is expected to be Bridge Project on the six to four. reduced from 10 minutes to Spaulding Turnpike has been four minutes. Connections to under construction for five years. detention basins, the restoration of local roadways will be improved, With completion slated for 2022, Railway Brook and future accom- reducing circuitous local travel on this multi-million dollar project is modations for railroad spur across the turnpike system. projected to cost a total of $270 the Turnpike by others, (compleOther benefits of the project million dollars by the time it is tion spring 2016) include improvements to water • Contract “O” — rehabilitation completed. The project is divided quality through higher order water into five constructions contracts. of the existing Little Bay Bridges treatment basins that will address Currently, three contracts are either (completion fall 2017) the increase in imperious surface. • Contract “Q” — construction completed or underway. Two of turnpike roadway improveremaining contracts will be finalLong-Term Plan ized over the next five to seven ments on the Dover side of the The project is divided into five Little Bay Bridges to include the years. contracts. The first contact for elimination of Exit 5, full service “The project, which is primarily $54.1 million started in early interchange at Exit 6 with the funded through turnpike toll revenue and bond proceeds, will alle- installation of two signalized inter- spring of 2010 with the new chanviate traffic congestion between sections at the new Exit 6 ramps, a nel crossing. The second contract for $48.7 Newington and Dover on Routes 4 roundabout at Boston Harbor Road, municipal water and sewer million started in spring of 2012 and 16,” Cota explained. In addition to the turnpike expansion, the infrastructure upgrades, Unitil gas and involves the roadway expanproject has invested in environ- line relocations along the easterly sion in the town of Newington. mental mitigation components side of the turnpike including a Completion is expected in spring ($4.57 million invested in close to directional bore installation under 2016. The third contract for $34 mil225 acres for preservation and Pomeroy Cove, and the construcrestoration), the completion of tion of sound walls north and south lion is the rehabilitation of the 6 interchange. existing Little Bay Bridge crossregional Park N Ride facilities of •Exit Contract “S” — (completed in Dover and Rehabilitation of the General ing; it started in spring of 2014 and Rochester, with one being planned Sullivan Bridge to accommodate is expected to be complete in late in Lee) and investments in alterna- pedestrian and bicycle access summer of 2017. The fourth contract, currently tive transportation options ($2 mil- across the Little Bay. Studies are lion investment in the Amtrak currently being conducted to eval- estimated at $50 million, includes Downeaster and expanded transit uate the structural integrity of the roadway approach construction in service with COAST and C&J, in bridge and the feasibility to com- Dover. It will be let to bid in May, addition to the creation of a plete the rehabilitation. 2016, with estimated completion Transportation Management (Construction is planned for 2021- in summer of 2020. Authority). The final contract to rehabilitate 2022.) The construction contracts will Due to the turnpike investments the existing historic General ultimately provide four travel lanes under this project, Cota explained Sullivan Bridge for pedestrian and northbound and southbound along that two other supplemental proj- bicycle access across the Little Bay the turnpike between Exit 3 and ects are being brought forward to is anticipated to be let to bid in the Exit 6. These contracts include: further improve traffic flow and winter of 2017-18 and is estimated • Contract “L” — construction accommodate long-term opera- to cost between $25-$30 million. of the new southbound Little Bay tional maintenance of the new Evaluation for the feasibility is Bridge (completed fall 2013) facility: the upgrade of the Dover underway. • Contract “M” — construction Toll Booth to develop Open Road A project of interest was entered of the turnpike roadway approach Tolling to reduce user’s delays and into contract in the fall of 2014. on the Newington side of the Little the construction of a new Turnpike Completion date is September 15, Bay Bridge including a new full Maintenance facility at the former 2017. service interchange at Exit 3, drive-in theater located in see SPAULDING page 16 improvements of stormwater Newington.
Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • June 1, 2016 • Page 11
D Doosan oosan w wheel heel lloaders oaders a are re packed packe ed with with comfort comfort features features yyou ou ccan an ssee, ee, h hear, ear, a and nd ffeel. eel. A w wide-open ide-open vview iew o off tthe he w work ork a area. rea. T Tinted inted g glass. lass. L Low ow n noise oise llevels. ev vels. A Air ir ssuspension uspension sseat eat a and nd e ergonomic rgonomic ccontrols ontrols iin n lline ine w with ith yyour our n natural atural m movements. ovements. S Still, till, p erformance a nd p roductivity is is key, key, and and your your Doosan Doosan lloader oader d elivers p ower a nd ttorque orque tto op enetrate h ard m aterials. S uperior performance and productivity delivers power and penetrate hard materials. Superior llift ift h eight a nd llift ift ccapacity apacity iincrease ncrease efficiency. efficiency. Operators Operators ccan an ssee ee a nd ffeel eel tthe he d iffe erence. height and and difference. G et a ccloser loser llook. ook. S top b ya nd vvisit isit u s ttoday. oday. Get Stop by and us
30 Birch Birch Island Island R 30 Road oad | W Webster, ebster, M MA A 508.949.0005 | www.barryequipment.com www.barryequipment.com 508.949.0005
Page 12 • June 1, 2016 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
- - NorthlandJCB.com Our Newest Location 150 N. Plains Industrial Road Wallingford, Connecticut
SALES * SERVICE* RENTALS
DISPLAY ADS/ CLASSIFIEDS Hydraulic Cranes 8 to 600 Ton Daily & Hourly Services www.astrocrane.com
Fully Insured 200 Codman Hill Rd., Boxborough, MA 01719 978-429-8666
Classified Rates: 30 Words or Less for $40.00. Each Additional Word is $1.16. For just an additional $20 your ad can be posted on our online searchable database for 30 days. Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034
215/885-2900 • Fax 215/885-2910 Toll Free 1-800/523-2200 AIR COMPRESSORS
EXCAVATORS
2015 DryAIR 250FS, Classic, Free standing, Portable Aftercooler, New............$2995. Trask-Decrow Machinery 207-799-1538
Hydraulic Excavators
DAILY AND WEEKLY
Place Your Business Card for... 3 months 6 months 12 months
$300* $585* $1040*
only $50 an issue only $45 an issue only $40 an issue
Call now to reserve your space! 800-225-8448 * pre-payment required
EQUIPMENT RENTALS CLOSE TO YOUR JOB SITE
RENTMACHINES.COM CATERPILLAR GENIE® CHALLENGER® SCREEN MACHINE® ®
Doosan DX480 s/n 5217, 11’ Stick, JRB Powerlatch, QC, Bucket, Grapple, Runs well! 3,687 hours ............$227,800. Gibson Machinery 440-439-4000
Wheeled Excavators ‘12 Wacker Neuson 9503, 10 Ton Wheel Excavator w/ Bucket, Wain Roy, Very good condition, 1,650 hrs....$86,000. Able Tool & Equipment 860-289-2020
THE N.I.C.E. COMPANY 9 Rosenfeld Drive, Hopedale, MA Toll Free# 888-717-8096 • www.theniceco.com
We sell NICE machines! RENT ME!!
RENT ME!!
2012 VOLVO EC380DL:
2012 VOLVO EC340:
Coupler, 3500 Hrs, 9000 Ft/Lb Hammer
4000 Hrs, Plumbed
$189,000
$149,000
RENT ME!!
2012 KOBELCO SK260: A/C, Pattern Control, Reach Boom, 2-Way Aux. Hydraulics, 31.5” Pads, 48” Bkt, Long U/C, Hyd. Thumb $129,000
RENT ME!!
2014 CAT 303.5E: $49,000 RENT ME!!
350 Hrs, Hydraulic Thumb
RENT ME!!
NEW DOOSAN 225LC: with Factory Plumbing.
Only $149,000 $129,000 RENT ME!!
2008 CAT 324D: $99,000 $79,000 RENT ME!!
5200 hours
NEW 2014 Hyundai Robex R140LC9A EXCAVATOR: Brand New, Equipped 2007 KOMATSU PC158: Plumbed, QC, Fairly Low Hours $69,000 RENT ME!!
w/Factory Plumbing, AC, Bucket w/Teeth, Quick Coupler $115,000 $99,000
RENT ME!!
2010 JOHN DEERE 220W: 3700 Hrs, Angle/Tilt Coupler, Outriggers, Aux. Hydraulics $119,000
2014 HYUNDAI 145:
has Blade, 1600 Hrs, QC $109,000
WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT
WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT • WE RENT
Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • June 1, 2016 • Page 13
Page 14 • June 1, 2016 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
Sales Auction Company Hosts Annual Spring Auction
Sales Auction Company’s staff was eager and ready to help the attendees as they arrived.
S
ales Auction Company hosted its 7th annual Spring Public Equipment Auction on May 7, in Windsor Locks, Conn. The sale, which featured a diverse selection of earth moving/heavy equipment, fleet vehicles, trucks, trailers, aerial and material handlers, farm equipment and recreational vehi- The dreary cold weather didn’t prevent the crowd of more than 800 onsite bidders from staying all day. The cles, broke records, on all levels this year with 819 registered energy was high, and they were ready to buy. onsite bidders, 518 registered online bidders with Proxibid and 1,041 lots of equipment. The sale grossed a record high $5.8 million dollars in sales, $900,000 of which was sold through online bidding with Proxibid. The sale featured equipment from A&J Portfolio Landscape, Crown Oil Company, Barber Utilities & Excavation, and other area dealers, contractors, municipalities and rental outfits.
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Sam Sales (L) is the owner of Sales Auction Company.
see SALES page 18
Ryan Dumphy (L) and Dan Polacheck, both from North Hampton, Mass., were checking out the Ag equipment at the sale.
A 1997 Mack RD688S triaxle dump truck brought in $61,000.
(L-R) are Joey Kratzke and David Godek, both of Barber Utilities, Ellington, Conn., and Jake Lipton of Pleasant View Farms, located in Somers, Conn.
Buyers had their choice of 26 excavators.
Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • June 1, 2016 • Page 15
DOOSAN DELIVERS
The Doosan lineup of heavy equipment offers strong performance in the areas that matter most — from powerful bucket forces on excavators to superior payload capacities on articulated dump trucks and exceptional lifting capabilities on wheel loaders. And with our unbeatable warranty, dedicated dealer support and versatile attachment selection, one thing is certain: Doosan delivers. Call or visit your local authorized dealer today and see the Doosan difference. Authorized Doosan Dealers
Equipment East, LLC 61 Silva Lane • Dracut, MA 01826 • 978-454-3320 • www.equipmenteast.com
Barry Equipment Co., Inc. 30 Birch Island Road • Webster, MA 01570 • 508-949-0005 • www.barryequipment.com
F&W Equipment 164 Boston Post Road • Orange, CT 06477 • 203-795-0591 • www.fwequip.com
Central Equipment Company 45 Dempsey-Greaves Lane • Stillwater, ME 04489 • 207-827-6193 • www.centralequipmentco.com
Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. 15-D008
Page 16 • June 1, 2016 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
Key Aspect of Spaulding Job Involves Bridge Work SPAULDING from page 10
ABLE TOOL & EQUIPMENT 410 Burnham St. South Windsor, CT 06074 860-289-2020
149 Rocus St. Springfield, MA 01104 413-363-0780 www.abletool.net
RS EQUIPMENT 2900 County Street Somerset, MA 02726 508-672-1051 866-650-5297 DEALER IMPRINT www.rsequipment.com
Mustang Mfg
to learn more about Mustang skid steers visit
m u s t a n g m f g . c o m
Contract Number Three: Little Bay Bridge The third contract for rehabilitation of the existing Little Bay Bridge crossing “is a subset of five total turnpike projects,” Cota explained. “It is a complex bridge rehab over fast tidal current.” The nine-span, 1,589-ft. (487 m) -long structure will feature three general-purpose lanes plus an auxiliary lane in each direction to provide an adequate level of service for projected traffic numbers in 2025. The existing profile of the Little Bay Bridges — suitable for 60 mi. (96.5 km) per hour design criteria — will be maintained, as will the existing vertical clearance over the navigable channel. Rehabilitation will involve replacing the existing bridge decks and evaluating the existing steel girders to determine if modification or replacement is required. Cota said the rehab project will “replace the older 1966 steel stringers, rehab the mechanical connectors on the 1984 constructed bridge segment and replace the bridge deck.” Construction will be completed in two phases, with traffic maintained on the existing bridges and shifted once the widened section is completed so rehab can begin. General contractor R. S. Audley, Inc., from Bow, N.H., is overseeing 22 sub-contractors. After removal of the existing bridge, at a cost of $1.9 million, crews will furnish 66,780 lbs. (30,291 kg) of driving pile, 1.17 million lbs. (534,175 kg) of epoxy-coated reinforcing steel, shear connectors, 3.35 million lbs. (1.5 million kg) of structural steel and 4,259 cu. yds. (3,256 cu m) of concrete decking. Limited excavation is needed for the project, Cota said, and material will be reused onsite. “There is a total of 1,600 cu. yds. of common excavation and 2,090 cu. yds. of common bridge excavation.” Little Bay is a tidal area with currents up to seven knots (12 ft./sec.) and variations in water elevations of upwards to seven feet between high and low tides. “The challenge for the project,” Cota said, “is working over a waterway that has strong tidal flows, and adjacent to heavy traffic flows.” Another challenge was relocating a distribution gas main located under the existing bridge prior to construction. “Due to project timing, the utility owner, Unitil Gas Company, completed a directional bore for relocation of the gas line under the Little Bay for a distance of 2,550 feet,” Cota stated.
General Sullivan Bridge Other bridges will be rehabilitated under other contracts. The General Sullivan Bridge, which is an historic landmark structure identified as a highly valued resource eligible for the National Register of Historic Places, is an obstruction to navigation within the channel. The GSB is the second-highest rated historic bridge in the state’s historic bridge inventory due to its association with the development of the regional transportation network and with well-known and respected bridge designers, as well as its embodiment of distinctive characteristics of multi-span through truss bridges over navigable waterways. Because of its historic significance, this bridge is federally protected, which is why it will be rehabilitated to serve pedestrians, bicyclists and recreational use instead of replaced with a multi-use path attached to the rehabilitated and widened Little Bay Bridges. However, retaining it requires the removal of the bridge’s northerly approach embankment and wing walls to facilitate the proposed reconstruction of Hilton Drive. The existing concrete wing wall along the approach embankment will be removed, exposing the back of the abutment. A new pedestrian/bike path will connect the north end of the bridge with the Hilton Drive sidewalk. Currently used for recreational activities such as fishing and bicycling, this bridge is an important pedestrian connection across Little Bay. The cost for rehabilitation is less than $10 million. Major Project Elements In total, five interchanges will be consolidated or reconfigured. Exits 2 and 5 will be eliminated, with Exits 3, 4 and 6 providing full access in all directions. Park and ride facilities will be located at Exit 9 in Dover, Exit 13 in Rochester, and along U.S. 4 in Lee. An elevated rail connection from the Newington Branch Line into Pease Tradeport is planned. Cota said the final two contracts will be paid through a combination of toll revenue and bonding, and are on the schedule as approved. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG
Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • June 1, 2016 • Page 17
CONSTRUCTION AUCTION DAVIS AUCTIONS, INC.
SATURDAY, JUNE 18, 2016 • 9:00 A.M. LOCATION: 210 CHESHIRE ROAD, RT. 68 PROSPECT, CT
THINK SUNSHINE!!!
VEHICLES Tractor: 2011 INT’L ProStar Premium T/A, MaxxForce 13, 430hp, eng. brake, Eaton Fuller 10spd, A/R suspension, 14K front, 40K rears; Box Truck: 2000 INT’L 4000 Series, 26’ box w/peak, rebuilt DT466E, auto; Bucket Tucks: (3) 2003 GMC C4500 w/Terex Telelect TL36P Bucket, utility body, diesel; Early Consignments: Dump Truck: 1997 GMC C8500; 1987 FORD F800 w/STETCO Series 950 Catch Basin EQUIPMENT Cleaner Crane, plow, diesel; 1987 INT’L 1754 6-Wheel; 1979 MACK R487P w/front Excavators: IHI 28N Mini, OROPS, w/blade, aux. hyd., swing boom; plow & wing; Skid Steer Loader: 2012 JOHN DEERE 320D, EROPS, heat & air, 815 +/- hrs; Derrick Truck: 1986 INT’L 1900 w/Telelect C130 Derrick, DT466, auto, utility body, outriggers; Skid Steer Attachments: Unused-72” Grapple Buckets; Unused-72” Buckets; Unused-72” Flatbed Trucks: 2008 INT’L 4400 26’, MaxxForce DT, 7.6L L6 diesel; 2007 CHEV T8500 24’ Skeleton Buckets; Forks; Backhoe; VERSATECH Broom; T/A, w/locking rear axle, auto; 1975 FORD 700, gas; Loaders: CAT 931B Track Loader, EROPS; FIAT-ALLIS 545B Wheel Loader; Crane Truck: 1982 INT’L 1754 w/PITMAN Polecat Crane, utility body, diesel; Loader Backhoe: CASE 580CK, diesel, 2WD; Cars: 2007 FORD Crown Victoria; (2) 2005-2003 JAGUAR S-Type; 2006 HYUNDAI Sonata; Manlift: JLG 260MRT 26’ Scissor, 4x4, diesel; STRATO-LIFT 25’ Scissor, new batteries; 2003 FORD Taurus SES; SNORKLE Scissor, electric, needs work; SUV: 2010 CHEV Equinox LS, AWD; 2009 FORD Explorer, 4x4, needs trans.; 2002 NISSAN Xterra, 4x4; Cable Plow: VERMEER Flex Trak 75 Crawler Vibratory; Wheel Tractors: BOBCAT CT122 w/loader, backhoe, 3PtH, 4WD; KIOTI CK25 w/loader, 3PtH, Vans: 2009 CHEV Express Cargo; 2005 DODGE Sprinter 2500, diesel; (2) 2003-2002 GMC Safari Cargo; (3) 2001-1998 FORD E350 Cargo, V8; 4WD; FORD 445D, w/loader, forks, enc. cab w/heat, 3PtH, 4x4; JOHN DEERE 1010, Trucks: 2007 DODGE Dakota Ext Cab, 4x4, (2) 2009-2007 CHEV Silverado 3500, w/EagleLift 3PtH, PTO, 2WD; FERGUSON TA20, 3PtH, PTO, 2WD; FARMALL Super A, lift gate, 4x4; 2007 CHEV Colorado Ext Cab w/tool box, tonneau cover, 4x4; 2006 Restored; GMC Canyon Ext Cab w/toolbox, tonneau cover, 4x4; 2003 FORD F250 SD, 4x4; 3 PtH Attachment: 4’, 5’, 6’, & 7’ Brush Hogs; Unused-Fertilizer Spreaders; York Rake; 1997 FORD F450 SD; w/utility body, V8, diesel; 1996 CHEV 3500 w/plow, 4x4; Unused-In Box POWERLINE TM-150 5’ Rotary Tiller; WOODS SG100 Stump Trailers: 1998 FONTAINE 50Ton Detach Lowbed; 2016 TOPLINE TLU-16, 6’4” x 16’ Utility, Grinder; w/2’ dovetail, slide in ramps, brakes, & (2) 3500# axles; 2016 TOPLINE JTW-12, 6’4” Forklift: BIG-JOE PDR-20-106 Walk Behind, 2000lb cap.; KOMATSU FG25, propane; LULL x 12’ Utility, w/side & tail gates, & 3500# axle; 2007 INT. 20DT Equipment, elec. Highlander-2, 644 TT-34, diesel; brakes; 2003 EAGER BEAVER 12HA-PT Pintle Hitch Equipment, new deck, brakes Compactors: HYSTER 5-8 Ton Static Roller; Unused-MUSTANG LF88 Plate Compactor; & drums in 2015; 2000 KENSINGTON K3URE Utility; STEHL Tow Dolly; (2) 1985Generators: KUBOTA GL-6500S, diesel; VALSI 7500 Watt, gas; GENERAC 4000XL, gas; 1983 MONAN Storage/Chip Trailers; Welders: (2) MILLER Mark VIII, Multi-Operator; MILLER Millermatic 35; MILLER Bobcat 225; Recreational: 2006 POLARIS ATV; 2006 ARCTIC CAT F7 Snowmobile; MILLER Bluestar 185; MILLER Bluestar 6000; THERMAL ARC StakPak; Miscellaneous: Unused-In Box 30’x20’x12’ HD Storage Shelter Building; (2) Unused-In Box Miscellaneous: ELEPHANT-VAC Mobile Litter Vacuum, 8” hose, Kubota diesel; SWEEPSTER 40’x20’ Party Tent; Assorted Truck Parts-New & Used- Mack, Freightliner, Loader Attachment w/extra brooms & hyd. assembly; Lincoln Welder, 6 mth old; International; (12) Bundles of 4’x4’x2.5” Insulation; Heavy Duty-All Steel 60”x120” Homemade 2-Way Log Splitter; Cement Mixer, electric; Pressure Washer Workbench w/vise; Pallets of Landscape Pavers This is our early tentative list. We accept consignments up thru SATURDAY, JUNE 11, 2016 at 2:00 P.M. We never know what will be consigned at the last minute – so come to our inspection and find out! Davis Auctions, Inc., will be conducting our next auction of utility and construction equipment and related supplies on June 18, 2016. This auction will consist of excess equipment from the power companies, municipalities and others to be sold in absolute.
INSPECTION: FRIDAY, JuNE 17, 2016 Call for more information: DAVIS AUCTIONS, INC. (203) 758-4087 or 1-800-201-4368 www.davisauctionsinc.com
This is when/where you find out what is really here!!! For Online Bidding, Visit Realtimebid.com
TERMS: CASH OR GOOD CHECKS WITH IDENTIFICATION.
ABSENTEE BIDS ACCEPTED.
Website list frequently updated. If you don't see what you want here,
9:00 A.M. – 5:00 P.M. Auctioneer: Reginald Lussier Lyndonville, VT 05851 NH License# 2413
Page 18 • June 1, 2016 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
NEW ENGLAND SUPPLEMENT ADVERTISER INDEX ARGUS INDUSTRIAL COMPANY ....................................1
Sales Auction Holds 7th Annual Spring Sale in Conn. SALES from page 14
ASTRO CRANE ..............................................................12 BARRY EQUIPMENT CO................................................11 BULLETIN BOARD..........................................................12 C N WOOD CO INC ........................................................20 CLASSIFIED ....................................................................12 DAVIS AUCTIONS INC ..................................................17 DOOSAN NORTHERN NEW ENGLAND ......................15 E W SLEEPER CO............................................................9 EQUIPMENT EAST ........................................................1,7 FOLEY MARINE & INDUSTRIAL ENGINE ......................1
This mobile auction truck drives around the site leading the crowd to the items up for bid.
GORILLA HAMMERS........................................................1 J R VINAGRO CORPORATION........................................1 LORUSSO HEAVY EQUIPMENT LLC..............................5 M G EQUIPMENT ............................................................1 MILTON CAT....................................................................12
Derek Carroll (L) and Ryan Pontbriand, co-owners of All Construction Services, Gilbertville, Mass., were looking for some bargains.
MUSTANG DEALER GROUP ........................................16 NORTHLAND JCB ..........................................................12 ROGERS BROTHERS ....................................................19 ROY TEITSWORTH INC ................................................13 SUMMIT SUPPLY LLC/MULTI MACHINE ........................1 THE N.I.C.E. COMPANY ................................................13 THE W I CLARK CO ........................................................2 TYLER EQUIPMENT CO ..................................................3 The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
The top seller among the 22 skid steers up for bid was a 2014 Cat 289D, which went for $53,000.
Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • June 1, 2016 • Page 19
Tyler Equipment
C.N. Wood Co., Inc.
251 Shaker Road East Longmeadow, MA 01028 (413) 525-6351 (800) 292-6351 Parts: (877) 255-6351
200 Merrimac St. Woburn, MA 01801 (781) 935-1919
1980 Berlin Turnpike Berlin, CT 06037 (860) 356-0840 (800) 352-4473 Parts: (860) 356-0848
www.tylerequipment.com
Avon, MA (508) 584-8484 Johnston, RI (401) 942-9191
www.cn-wood.com
Page 20 • June 1, 2016 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide
200 Merrimac Street Woburn, MA 781-935-1919
60 Shun Pike Johnston, RI 401-942-9191
102 State Road Whately, MA 413-665-7009
140 Wales Avenue Avon, MA 508-584-8484