Northeast_13_2010 by Construction Equipment Guide

Published Nationally

Northeast Edition

$3.00

® June 23 2010 Vol. XLVIII • No. 13

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.ConstructionEquipmentGuide.com

Inside

Pine Bush Holds Annual Charity Golf Event…8

Bobcat and Doosan Demo New Models...14

Wrecking Corp.: Demolition by Number…63

Table of Contents ............4 Truck & Trailer Section .... ..................................53-59 Crushing, Screening & Recycling Section ....63-88 Parts Section............98-99 Business Calendar ......116 Auction Section ..107-120 Advertisers Index........118

Economic Healing Aided by Increased Industry Spending By Martin Crutsinger and Alan Zibel AP BUSINESS WRITERS

WASHINGTON (AP) The economic recovery is gaining strength from the biggest rise in construction spending in nearly a decade and the 10th straight month of expansion for manufacturers. The two positive reports eased some fears that the debt crisis in Europe might be starting to stunt the U.S. economic rebound. “The recovery is still on track,” said Brian Bethune, a senior economist at IHS Global Insight. While Europe’s troubles will put a drag on profits at U.S. companies that do business overseas, Bethune said, “it’s not going to be a show-stopper.” The burst in April construction spending reported June 1 by the Commerce Department sent a promising signal for an industry that was among the hardest hit during the recession. The 2.7 percent increase was spread across all major sectors. But temporary government incentives fueled gains in two of three major categories. The economy will eventually have to manage with less government support. In a separate report, the Institute for Supply Management, a trade group of purchasing executives, said its manufacturing index dipped only slightly in May from a nearly six-year high in April. But the 59.7 reading for May was well above the 50 level that indicates expansion. Export orders rose despite Europe’s troubles. The group’s employment index, which measures see ECONOMY page 116

Travelers through Huntington’s major business district will enjoy a faster and safer journey after next year’s completion of a project to reconstruct two NY Route 110 bridges over the Long Island Expressway, thereby improving traffic flow along this vital stretch of the Route 110 corridor.

Projects Underway to Aid Huntington’s Traffic Flow By Mary Reed CEG CORRESPONDENT

When the town of Huntington on New York’s Long Island was founded in the 1600s, whaling and other marine related services formed a large part of its economy, although this declined after the railroad

arrived in the 1860s. In common with many locations on Long Island, after World War II the population of the town increased at a tremendous pace, bringing with it urbanization and in particular increased traffic and extended commuting times. In a year’s time, however, travelers see TRAFFIC page 28

Former AED President, Michael Sill, Passes Away Michael Robert Sill, former president of Associated Equipment Distributors, passed away May 28, at the age of 78. Mr. Sill grew up in Duluth, Minn., and graduated from Duluth Central High School, and the University of Minnesota, Duluth. After serving in the United States Air Force

from 1951 to 1953, Mr. Sill went to work for Road Machinery & Supplies Co. (RMS), the company his father started in 1926. In 1956, he moved to Minneapolis to start a RMS branch office and worked for the company until his retirement in 1996. During that time, Mr. Sill played a pivotal

role in the success of RMS, helping the company become statewide representative of Clark (wheel loaders), Blaw Knox (asphalt pavers), and Link Belt (cranes and excavators) by 1960. He helped the company grow further as RMS entered the truck equipment business in 1972 see SILL page 24

Page 2 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.ransome.com 1-877-RANSOME

2007 Cat 938G II Stk#: UP20074, S/N: CRD02494, 2307 hours, cab, air, GP bucket, forks, limited slip differential, QC, ride control $135,000

ASPHALT / PAVING / CONCRETE EQUIPMENT 2004 CAT AP-1055B, S/N: A3P00196, Stk #UT10004, 4506 hrs, 10'- 20 ' Ext-A-Mat Screed, Electric Htd Screed, Generator, Push Rollers....................................................................................$CALL

BACKHOE LOADER 2003 CAT 430DIT, S/N: BML02490, Stk #: UT10121, 4793 Hrs, Cab, A/C, E-Stick, GP Bkt, Forks, Joystick Control, 4WD ....$43,300

1998 CAT 990, S/N: 4FR00308, Stk #: UP20035, CAT Certified Powertrain Rebuild $CALL

CLICK HERE www.ransome.com to view our LARGE fleet of used inventory.

COMPACTION EQUIPMENT - SMOOTH DRUM 2005 CAT CS-563E, S/N: CNG01235, Stk #: 92808, 1778 hours, 84" single drum dirt roller, canopy ......................................$75,000

DOZER - CRAWLER 2005 CAT D6R XL II, S/N: AAX01075, Stk #: 92811, 4551 hours, AC, SU Blade, New UC, New Injectors, New Equalizer Bar, Ripper Valve ..................................................................................$139,000 2004 CAT D6RIIXL, S/N: AAX00874, Stk #: UP20086, 2601 Hrs, Cab, A/C, 6SU-Blade, 24” Track, Wired/Plumbed for Trimble GPS .. ..........................................................................................$145,000 2005 CAT D6RIIXL, S/N: AAX01131, Stk #: UP20072, 2421 Hrs, Cab, A/C, Semi-U Blade, P&B Turned @ 1,658 Hrs ..........$139,000 2004 CAT D8R II, S/N: 6YZ01580, Stk #: 92739, 4413 hrs, cab, air, 3rd valve, SS ripper, $30,000 in UC work done ................$369,300 2004 CAT D8R II WDA, S/N: 6YZ01964, Stk #: UT10078, 6130 hours, cab, air, Caron SU blade, diff steer, Caron pads ....$279,000

ANOTHER OPTION FOR YOUR EQUIPMENT NEEDS

SCRAPER (2) 1998 CAT 627F, S/N:1DL00490, Stk#92736 & S/N:1DL00477, Stk #92735, 10,000+/- hours, cab, A/C, push pull, big tires, good cond ......................................................................................$CALL

OFF-HIGHWAY TRUCK

2008 CAT 257B2, S/N: SLK08625, Stk #: UT10105, 602 hours, cab, AC, Heat, Hi-Flow, GP Bucket ......................................$36,000 2004 CAT 277B, S/N: MDH00460, Stk #: UT10138, Cab, A/C, Heat, Aux Hyd ..............................................................................$19,000

2005 CAT 735, S/N: AWR00825, Stk #92704, 3738 hrs, cab, air, liners, 23.5 R 0 25 XADN Tires at about 50 % ..................$269,000 2004 CAT 735, S/N: AWR00715, Stk #92703, 4035 hours, cab, AC, liners..................................................................................$249,000

WHEEL LOADER

EXCAVATOR - CRAWLER

2005 CAT 928GZ, S/N: DJD001847, Stk #: UP20034, 2900 Hrs, Cab, A/C, GP Bkt, 82% Life Remaining on Tires..................$87,300 2007 CAT 938G II, Stk#: UP20074, S/N: CRD02494, 2307 hours, cab, air, GP bucket, forks, QC, ride control........................$135,000 2006 CAT 950GII, S/N BAA01037, Stk# UP20079, 6525 hrs, CAB, AC, Ride Ctrl, 3rd Valve, Logging Forks, Auto Shift, CTWT .............. ..........................................................................................$119,000 2007 CAT 950H, S/N K5K00929, Stk# UP20078, 3319 hrs, CAB, AC, Forks, GP BKT, Auto Shift, CTWT ......................................$169,000

2006 CAT 303.5C CR, S/N: DMY00553, Stk #: UT10044, 698 hours, cab, air, long stick 5'10", blade, rubber pads, hammer lines ............................................................................................$39,900 2005 CAT 330CL, S/N: DKY03490, Stk #92777, 2366 hrs, 77,000 lbs, 12' 6" stick, 34" pads, 36" bkt ....................................$159,000 2003 CAT 345BL, S/N: AGS01717, Stk #92774, 4941 hrs, 100,000#, 11' stick, 36" pads, 60" bucket, pin grabber ....$165,000 2006 CAT 365CL, S/N: MCS00331, Stk #HR3179, 2121 hours, 145,450#, 25' 7" Boom, 13' 7" Stick, 60" bucket, 36" Track Pad Width ................................................................................$495,000

Used Equipment Sales: 215-245-2749

Equipment Sales Event RED TAG & YARD SALE Every Thursday, 10:30 to 1:30 March 25th through June 24th

3.9% for 36 months (Most Units) • Minimum of a 6-month powertrain warranty • Up to a 140-point inspection • Less than 50% wear on Tires and Undercarriage • Maintenance completed by Cat factory trained technician • Low hour Ransome owned Rental Fleet Equipment • Extended service coverage options

CRAWLER LOADER 2006 CAT 953C, S/N: BBX02600, Stk #: UT10083, 3577 hours, cab, air, GP bucket, serviced every 250 hours ....................$79,000 2006 CAT 953C, S/N: BBX02603, Stk #: 96098, 1,004 hours, cab, air, GP bucket, like new machine, U/C about 90% ................$CALL

SKID STEER LOADER - RUBBER TRACK

Tom Rosser Cat Certified Rental/Used equipment includes:

2004 CAT D8R II WDA Stk#: UT10078, S/N: 6YZ01964, 6130 Hours, cab, AC, Caron SU blade, diff steer, Caron pads, pins & bushings turned & new sprocket segments, minor blade repairs. . .$279,000

Used Equipment Manager:

Joe Villa 215-245-3729

There will be Special Pricing & Discounts on Select Rental, New & Used Equipment. Also Contractor supplies, Parts, Work Tools and More!!! Every Thursday Starting March 25th

2973 Galloway Road • Bensalem, PA 19020

215-943-4800

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 3

South Jersey Branch: 201 North Route 73 Winslow Township, NJ 08095

Corporate Headquarters: 2820 Hamilton Blvd South Plainfield, NJ 07080

USED EQUIPMENT FOR SALE Contact: Jim Casendino 800-562-0012 jcasendino@bindermachinery.com ASPHALT / PAVING / CONCRETE EQUIPMENT

OFF-HIGHWAY TRUCKS

1996 WIRTGEN 2100DC, S/N 3.21.259, 273 HRS, 79” DRUM W/ HT3 TOOTH HOLDERS; MERCEDES 600 HP DIESEL ENGINE; DUAL GRADE & SLOPE CONTROLS. COMPLETE REBUILD ..............................................................................................$325,000

2005 KOMATSU HM300-1, S/N 1312, 1,898 HRS, BRIDGESTONE 23.5 X R25 TIRES; A/C; BODY HEATER; LINCOLN AUTO LUBE SYSTEM; TAILGATE; QUALCOM SYSTEM .. ........................................................................................................................$235,000 2005 KOMATSU HM300-1, S/N 1310, 2,321 HRS, BRIDGESTONE 23.5 X R25 TIRES; A/C; BODY HEATER; LINCOLN AUTO LUBE SYSTEM; TAILGATE; QUALCOM SYSTEM .. ........................................................................................................................$235,000 2005 KOMATSU HM300-1, S/N 1208, 2,134 HRS, GOODYEAR 23.5 RL-2 TIRES; A/C; BODY HEATER; RETARDER; LINCOLN AUTO LUBE SYSTEM; TAILGATE ........$210,000 2005 KOMATSU HM300-1, S/N 1177, 2,307 HRS, GOODYEAR 23.5 RL-2 TIRES; A/C; BODY HEATER; RETARDER; LINCOLN AUTO LUBE SYSTEM; TAILGATE ........$215,000 2005 KOMATSU HM300-1, S/N 1174, 3,405 HRS, BRIDGESTONE 23.5 X R25 TIRES; A/C; AUTO-LUBE SYSTEM; BODY HEATER; TAILGATE; QUALCOM SYSTEM ..$195,000 2004 KOMATSU HM350-1, S/N 1072, 3,117 HRS, BRIDGESTONE 26.5 X 25 RADIAL TIRES; A/C; LINCOLN AUTO LUBE SYSTEM; BODY HEATER; TAILGATE. QUALCOM SYSTEM ..........................................................................................................$215,000 2005 KOMATSU HM350-1, S/N 1081, 1,919 HRS, BRIDGESTONE 26.5 X 25 RADIAL TIRES; BODY HEATER; AUTO LUBE SYSTEM INSTALLED; QUALCOMM SYSTEM. TAILGATE ................................................................................................................$225,000 2005 KOMATSU HM400-1, S/N A10022, 2,459 HRS, MICHELIN 26.5 X 25 RADIAL TIRES; BODY HEATER; A/C; LINCOLN AUTO LUBE SYSTEM; TAILGATE. QUALCOM SYSTEM ..........................................................................................................$275,000 2005 KOMATSU HM400-1, S/N 1230, 2,113 HRS, BRIDGESTONE 29.5 X 25 RADIAL TIRES; A/C; LINCOLN AUTO LUBE SYSTEM; TAILGATE; QUALCOM SYSTEM $295,000

CRAWLER DOZERS

2004 HAMM HD12 S/N 61195, 2,125 HRS, 48” DRUMS; OPEN ROPS; NEW DEUTZ ENGINE; NEW OEM PAINT JOB ................$17,500

2006 KOMATSU D31PX-21A, S/N 51070, 426 HRS, 24” TRACKS; KOMSTAT II; 10’6” BLADE; OPEN ROPS; ROPS HEATER ................................................................$60,000 2006 KOMATSU D31PX-21A, S/N 51021, 107 HRS, 24” TRACKS; KOMSTAT II; 10’6” BLADE; OPEN ROPS; ROPS HEATER ................................................................$65,000 2005 KOMATSU D31PX-21A, S/N 50683, 543 HRS, 24” TRACKS; KOMSTAT II; 10’6” BLADE; OPEN ROPS; ROPS HEATER ................................................................$55,000 2006 KOMATSU D39EX-21A, S/N 1941, 524 HRS, KOMSTAT II; 20” TRACKS; 9’ BLADE; ENCLOSED CAB WITH A/C ....................................................................$75,000 2005 KOMATSU D61PX-15, S/N B40114, 700 HRS, 34” TRACKS; 6-WAY BLADE; ENCLOSED CAB W/ HEA-DEF-A/C; 100% CERTIFIED REBUILD AT 3,965 HRS$125,000 2005 KOMATSU D65EX-15, S/N 67617, 1,682 HRS, 26” TRACKS; SEMI-U TILT DOZER; ADDED CWT; ENCLOSED CAB WITH HEA-DEF-A/C ............................$148,500 2005 KOMATSU D65PX-15, S/N 67683, 4,824 HRS, 36” AR TRACKS; POWER PITCH & TILT BLADE; ENCLOSED CAB W/ HEA-DEF-A/C; PIN & BUSHING TURN @ 4806 HRS ........................................................................................................................$115,000

CRAWLER EXCAVATORS

2003 WIRTGEN 1900 S/N 09200175, 4,079 HRS, 79” DRUM W/ HT3 TOOTH HOLDERS; DUAL GRADE & SLOPE CONTROLS $195,000

2007 KOMATSU PC200 HD-8, S/N A88277, 593 HRS, TIER 3 ENGINE; KOMTRAX 3; 28” TRACKS; A/C; HD 9’7” ARM; HKX HAMMER/THUMB COMBO KIT; HAMMER AUTO LUBE WINDOW GUARD; JRB SLIDE-LOC; PSM PROGRESSIVE LINK HYD THUMB; ESCO 42” BUCKET............................................................................................$160,000 2006 KOMATSU PC220 LC-8, S/N A88066, 1,151 HRS, TIER 3 ENGINE; KOMTRAX 3; 32” TRACKS; 10’ ARM; HYD CONTROL UNIT; A/C; PATTERN CONTROL CHANGE VALVE. JRB SLIDE-LOC; ESCO 48” BUCKET....................................................$150,000 2000 KOMATSU PC228US LC-2, S/N 15511, 9,211 HRS, 28” TRACKS; 9’6” ARM; ESCO 42” BUCKET; NEW TRACK LINK ASSEMBLIES; CYLINDERS REPACKED; SERVICED & PAINTED ..............................................................................................$75,000 2000 KOMATSU PC228US LC-2, S/N 15317, 10,681 HRS, 32” TRACKS; 9’6” ARM; A/C; PARTIAL ENGINE REBUILD; FRONT END REPINNED & BUSHED; NEW HYD PUMP. CYLINDERS REBUILT; NEW UC; HKX HAMMER KIT W/ AUTO-LUBE ..$150,200 2005 KOMATSU PC270 LC-7L, S/N A86254, 2,005 HRS, 32” TRACKS; 10’ ARM; HYD CONTROL UNIT; A/C; JRB SLIDE-LOC ............................................................$135,000 2007 KOMATSU PC270 LC-8, S/N A87090, 2,375 HRS, TIER 3 ENGINE; KOMTRAX 3; 32” TRACKS; A/C; PATTERN CHANGE VALVE; YOUNG 60’ LONG FRONT; 60” BUCKET ........................................................................................................................$225,000 2007 KOMATSU PC300 LC-7E0, S/N A88848, 966 HRS, TIER 3 ENGINE; KOMTRAX 2+; 34” TRACKS; A/C; 10’6” ARM; HYD CONTROL UNIT; JRB SLIDE-LOC. ESCO 54” BUCKET ............................................................................................................$200,000 2001 KOMATSU PC400 LC-6, S/N A84212, 832 HRS, 36” TRACKS; 11’1” ARM; HYD CONTROL UNIT; A/C; JRB SLIDE-LOC; NEW LINK ASSY; HR METER INSTALLED AT 7,160 HRS; TRAMAC V56 HAMMER ................................................................$275,000 2001 KOMATSU PC400 LC-6, S/N A85043, 12,868 HRS, 36” TRACKS; ACTIVE MODE; A/C; 11’1” ARM; GEITH 36” DIPPER; COMPLETE REBUILD ............................$175,000 2005 KOMATSU PC400 LC-7L, S/N A86361, 6,500 HRS, 36” TRACKS; 11’1” ARM W/PIPING; HKX HYD CONTROL UNIT; A/C; ESCO 54” BUCKET ......................$175,000 2006 KOMATSU PC400 LC-7L, S/N A86772, 2,727 HRS, 36” TRACKS; 11’1” ARM; A/C; JRB SLIDE-LOC; ESCO 54” BUCKET ........................................................$195,000

EXCAVATOR - MINI (UP TO 12,000 LBS)

2000 KOMATSU PC400 LC-6 S/N A84122, 11,649 HRS, 36” TRACKS; 13’2” ARM; A/C; NEW MAIN CONTROL VALVE; ESCO 48” BUCKET; REPAINTED ..........................................................$85,000

2007 KOMATSU PC35MR-2, S/N 10216, 717 HRS, 12” ROAD LINER PADS; ENCLOSED CAB W/HEATER & A/C; 5’9” ARM W/PIPING; 4 WAY POWER ANGLE BLADE. WERK-BRAU HYD THUMB W/PIPING; 4 WAY POWER ANGLE BLADE; WERKBRAU 24” BUCKET ............................................................................................$40,000

2006 KOMATSU D37EX-21A S/N 5721, 538 HRS, 16” TRACKS; KOMSTAT II; 9’ BLADE; OPEN ROPS; ROPS HEATER ..................$57,500

SCRAP PROCESSING / DEMOLITION EQUIPMENT 2008 SENNEBOGEN 850M, S/N 850.0.285, 9 HRS, MAGNET SYSTEM W/25KW BALDOUR GENERATOR; 57’9” REACH; MAGNET LINK; FRONT WINDOW GUARD; ADDITIONAL LIGHTS................................................................................................$695,500

SKID STEERS 2007 ASV POSI-TRACK SR70, S/N SSB00558, 388 HRS, 15” RUBBER TRACKS; MP1 PACKAGE; ENCLOSED CAB; A/C; HEATER; HYD QUICK COUPLER; 67” BUCKET; I-R Q/D FORKS (LOOSE) ..........................................................................................$46,500 2007 ASV POSI-TRACK SR70, S/N SSB00557, 184 HRS, 15” RUBBER TRACKS; MP1 PACKAGE; ENCLOSED CAB W/HEATER & A/C; HYDRAULIC QUICK COUPLER; 67” BUCKET. 8” JRB SNOW PUSHER; ASV BUCKET ................................................$47,500 2007 ASV POSI-TRACK SR80, S/N SEB00957, 300 HRS, 20” RUBBER TRACKS; MP1 PACKAGE; ENCLOSED CAB W/HEATER & A/C; WIPER KIT; BACK UP ALARM; 72” BUCKET ..............................................................................................................$47,500 2009 ASV PT30, S/N PTA03860, 42 HRS, 11” RUBBER TRACKS; OPEN ROPS; BACKUP ALARM; UNIVERSAL MOUNT ADAPTER (LOOSE); 48” 0.25CY QDGP BUCKET ...... ..........................................................................................................................$25,000 2009 ASV PT70, S/N PTH00667, 29 HRS, 15” RUBBER TRACKS; ENCLOSED CAB; A/C; HEATER; WIPER KIT: BACK-UP ALARM; HYDRAULIC QUICK COUPLER. 74” BUCKET W/ RUBBER EDGE................................................................................$55,400 2009 ASV PT80, S/N PTI01318, 21 HRS, 20” RUBBER TRACKS; ENCLOSED CAB W/HEATER & A/C; WIPER KIT; BACK UP ALARM; HYDRAULIC QUICK COUPLER. 72” BUCKET ..............................................................................................................$60,000 2009 ASV PT80, S/N PTI01319, 9 HRS, 20” RUBBER TRACKS; ENCLOSED CAB W/HEATER & A/C; WIPER KIT; BACK UP ALARM; HYDRAULIC QUICK COUPLER. 72” BUCKET ..............................................................................................................$60,000

1999 KOMATSU PC270 LC-6 S/N A83064, 7,203 HRS,; 24” TRACKS; 10’ HD ARM W/ PIPING; HYD CONTROL UNIT; ESCO 48” BUCKET; SERVICED & PAINTED ................................................$70,000

WHEEL LOADERS 2006 KOMATSU WA380-6, S/N A53081, 2,010 HRS, TIER 3 ENGINE; KOMTRAX 2; MICHELIN 23.5 X R25 XHAT TIRES; 3RD VALVE; ADDED CWT; A/C; JRB COUPLER. JRB Q/D 4 CY G/P BUCKET; NEW OEM PAINT ................................................$182,000 2006 KOMATSU WA380-6, S/N 65029, 2,002 HRS, TIER 3 ENGINE; KOMTRAX 2; MICHELIN 23.5 X R25 XHAT TIRES; 3RD VALVE; ADDED CWT; A/C; JRB COUPLER. Q/D 4 CY G/P BUCKET......................................................................................$152,500

ATTACHMENTS FOR SALE

2007 KOMATSU D61EX-15E0 S/N B45024, 522 HRS, TIER 3 ENGINE; KOMTRAX 2+; 24” TRACKS; 6-WAY BLADE; ENCLOSED CAB WITH HEADEF-A/C ..............................................................$160,000

Contact: Gerry Yarka 800-562-0012 gyarka@bindermachinery.com

KOMATSU KO4PB4000A-F

JRB JRWA200GP WA150

JRB JRWA300GP WA250

ESCO EK400 42XDP

S/N A86280; ARM PC400-7 13'4" W/BKT LINK & CYL................................................$23,480

S/N 0406-187797-3; BUCKET QDGP 2.0 CY 94" W/EDGE ........................................$5,400

S/N 106-173104-1/10; BUCKET QDGP 3.0CY 106” W/EDGE ................................................$6,600

S/N RH87918; BUCKET 42”LIP 46”CUT 1.96C ............................................................$9,500

www.bindermachinery.com

Page 4 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NORTHEAST EDITION Circulated Throughout

IN THIS ISSUE SPECIAL SECTION…

RECYCLING, CRUSHING AND SCREENING

Be sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

FEATURES…

PINE BUSH EQUIPMENT HOLDS ANNUAL CHARITY GOLF EVENT The event wase able to raise $7,000 for the American Cancer Society.

The event, coordinated by Two Rivers Marketing in Des Moines, Iowa, was packed with machine and attachment presentations.

32 38

BOBCAT AND DOOSAN HOLD ‘DAWN OF NEW DAY’ DEMO IN LAKE CITY, GEORGIA

RISH EQUIPMENT COMPANY NAMED NEW NPK DISTRIBUTOR

Headquartered in Bluefield, W.Va., Rish Equipment Company has five locations in West Virginia, six locations in Virginia, and one location in Western Maryland.

N.J.’S CHERRY VALLEY TRACTOR TAKES ON FULL KUBOTA CONSTRUCTION LINEUP

The company has been a Kubota dealer for tractors, commercial mowers, lawn and garden, utility vehicles and light construction equipment since 1977.

PINNACLE’S OWSLEY RETIRES, MACKINSON NAMED SUCCESSOR

During his tenure with Pinnacle Cranes, Owsley has been responsible for managing all aspects of sales and service for the company.

JCB FIELDS SQUAD FOR WORLD CUP DUTIES IN SOUTH AFRICA

Two of the JCB Teletruks, manufactured by JCB Utility Products at its Cheadle plant in Staffordshire, have been deployed at Soccer City, Johannesburg — the main 94,000-capacity World Cup stadium that will stage the opening games as well as the 2010 World Cup Final.

110

RITCHIE BROS. HOLDS MULTI-MILLION DOLLAR PUBLIC AUCTION IN NORTH EAST, MD.

More than 1,800 registered bidders (both onsite and online) from 37 countries participated in the auction, including 48 U.S. states and all Canadian provinces. More than 1,800 items were sold during the one-day public auction.

32 110

• New Hampshire • Vermont • Connecticut • Rhode Island • New York • New Jersey • Delaware • Maine • Pennsylvania • Maryland/D.C. • Virginia • West Virginia • Massachusetts

Founder, Publisher & CEO

Edwin M. McKeon Sr.

Vice President Emeritus Northeast Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr.

Hal Ewing Edwin M. McKeon Jr. Craig Mongeau Ken Kolasinski Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

Main office

Toll Free Fax Web site Editorial e-mail Advertising e-mail

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910

www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com

Edwin M. McKeon Jr. • New Jersey • Eastern Pennsylvania 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 e-mail tmckeon@cegltd.com

For advertising rates: Contact

Lou Reardon • North, Western & Central Pennsylvania • Delaware • Maryland • Northern Virginia 717/540-1518 Toll Free 888/211-5711 Fax 717/540-8184 e-mail lreardon@cegltd.com

Contact

Kent Hogeboom • New York • New England 315/823-7668 Toll Free 800/988-1203 Fax 315/823-4136 e-mail khogeboom@cegltd.com

Contact

Ed Bryden • West Virginia 440/268-9690 Toll Free 800/810-7640 Fax 440/268-9691 e-mail ebryden@cegltd.com

Contact

Rachel Slavid • New England 508/755-1585 Toll Free 800/225-8448 Fax 508/755-1584 e-mail rslavid@cegltd.com

Contact

Construction Equipment Guide Northeast Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

103 CLASSIFIEDS 112 COMING AUCTIONS 116 BUSINESS CALENDAR

EQUIPMENT… 92 KOMATSU WA250PZ-6 Tool Carrier 96 BOBCAT E50 Compact Excavator 117 JLG G10-43A Telehandler

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Northeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2009, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 5

PENN JERSEY MACHINERY CALL FOR DETAILS ON THE FOLLOWING MACHINES!

FOR SALE OR RENT!

Volvo COMPACT – Built to Perform. Built to Last.

MODEL #

EQUIP. GROUP

MODEL #

DEALER ID #

YEAR

LOCATION

AIR COMPRESSORS

Comp. Whl Ldr. Comp. Excav. Skidsteer Skidsteer Skidsteer Skidsteer Skidsteer

L20B EC30 MC60B MC80B MC80B MC110B MC90B

365403 301389 365254 70102 303294 70048 303889

2008 2004 2007 2008 2007 2008 2006

St. Island Deptford Deptford Lionville Somerville Lionville Lionville

SELL PRICE $52,900 $29,500 $18,995 $23,600 $30,000 $20,250 $19,250

2006 L220E s/n V4094, 5710 hours Equipped with: • 82167-Engine Block Heater 120V, 1500W • 80885/80943-Work Lights Front/Rear, Extra • 82108-Automatic Lubrication System, Std. • 80055-134 7.0YD3 P/O STE GP Bucket • 80115-134 3PC. Bolt-OnEdge, STE Buckets $231,500 Deptford

DEALER ID #

YEAR

HOURS

LOCATION

SELL PRICE

AIRSOURCE 185

398826

2008

230

Somerville

AIRSOURCE 185

398828

2008

255

Somerville

$9,950 $9,950

P185WIR

370744

2006

350

Somerville

$10,900

P185WIR

395271

2008

800

Somerville

$10,900

P185WJD

387230

2007

825

Somerville

$10,900

P185WIR

395363

2008

220

Somerville

$11,900

P260WIR

400615

2008

400

Somerville

$14,900

XP825WCU

398904

2008

550

Somerville

$55,900

HP1600WCU IQ

304011

2007

1700

Somerville

$110,000

HP1300WCU IQ

304011

1999

3700

Somerville

$25,000

0% for 12 MONTHS On All Ingersoll Rand Compressors

CHECK OUR WEBSITE www.pennjerseymachinery.com OR CALL 908-218-1919 FOR OUR COMPLETE INVENTORY!

2001 Volvo A40D, 11,800 Hours, s/n 60043.... 2005 Komatsu WA450, 4067 Hours, Equipped with: Side Dump & Forks, Reversing Fan, ECSS Boom .................................... ....Sell Price $95,000 Suspension, 90% Tires $195,000

2005 PF5510, s/n 0184444, 2639 hours, Equipped with: Omni 3E electric screed Topcon grade and slope, Sonic feed $195,000

INGERSOLL RAND Generators & Light Towers MODEL #

SERIAL ID #

YEAR

HRS

2006 2006 2006 2006 2006

4300 2955 1495 1375 1150

LOCATION

PRICE

Tower Tower Tower Tower Tower

2004 Ingersoll Rand PF5510, 2800 Hours, Omni 3A Screed, Topcon Grade Controls, Sonic Feed, Auxiliary Hydraulic Generator, All Wear Parts 50% or Better $125,000

Ready to Work! For Sale Or Rent!

MODEL #

SERIAL ID #

YEAR

HRS

368943 384097 399745 397684 397687

2006 2007 2008 2008 2008

8100 2990 3 358 480

LOCATION

PRICE

GENERATORS

LIGHT TOWERS Light Light Light Light Light

2001 Volvo A40D, 10,800 Hours, s/n 60045 ..........................Sell Price $95,000

368714 370055 373425 370056 371032

Somerville, Somerville, Somerville, Somerville, Somerville,

NJ NJ NJ NJ NJ

$3,700 $5,500 $5,900 $5,900 $6,250

G40 G125 G145 G185 G290

PENN JERSEY NEW LOCATION Staten Island - S I PJM Branch Store 331 Edward Curry Ave • Staten Island, NY 10314 (718) 889-0105 • Fax: (718) 889-0107 Call Salesman Bob Watt at (516) 330-7873 for all your equipment needs. Lionville Branch 120 Gordon Rd Lionville, PA 19341 (610) 363-9200

Somerville Branch 61 County Line Rd Somerville, NJ 08876 (908) 218-1919

Deptford Branch 1330 Hurfville Rd Deptford, NJ 08096 (856) 227-6400

Somerville, Somerville, Somerville, Somerville, Somerville,

NJ NJ NJ NJ NJ

$8,900 $23,000 $43,500 $41,500 $68,000

Page 6 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.grofftractor.com SKID STEERS 2006 CASE 465, Stk# U17898, 400.2 Hrs ................................$25,500 2006 CASE 445, Stk# U30007, 973.5 Hrs ................................$24,250 2006 CASE 465, Stk# U30022, 1394.8 Hrs ..............................$27,500 2004 TAKEUCHI TL130, Stk# U18979, 2705 Hrs ......................$18,750 2004 TAKEUCHI TL140C, Stk# U17263, 2814.0 Hrs ................$27,500 2004 TAKEUCHI TL150C, Stk# U17927, 2660 Hrs....................$24,500 2003 CASE 70 XT, Stk# U17786, 1207.0 Hrs............................$16,750

BACKHOE LOADERS 1994 CASE 580SK, SN: JJG0182954, Unit # U20172, 4WD, Std Hoe, 7772 Hrs....................................................................................$16,500 1994 CASE 580SK, SN: JJG0182981, Unit # U20027, 4WD, E-Hoe, 4472 Hrs....................................................................................$20,000 1991 CASE 580SK, SN: JJG0171396, Unit # U30128 , 2WD Std Hoe, 5621 Hrs....................................................................................$15,000 2004 CASE 580SM II, Stk# U18486, 2876 Hrs ........................$44,650

ROLLERS

2006 CASE 445, Stk# U30007, 973.5 Hrs $24,250

2007 CASE CX460, SN# N6SAS7001, 1145 Hrs $165,000

2004 CASE CX160, Stk# U17892, 2525.0 Hrs $55,000

See Our Website For A Complete Listing Of Used Equipment For Sale: www.grofftractor.com Call: Mike Lester (M) 717-554-6590 or 800-33-GROFF(47633) Equipment Located In Pennsylvania - Main Location: Mechanicsburg, PA

1999 HYPAC C-530AH, SN: A222C1628V Pneumatic 9 wheel .............. ..................................................................................................$22,500 1976 HYPAC C-530A, SN: A911C1549M Pneumatic 9 Wheel ..$14,000 2005 CAT CB-224E, SN: 22401346 2146 hrs............................$21,500

CRAWLER EXCAVATORS 2002 CASE CX75, SN: DAC0807105, Unit # U30095, Steel Tracks, 1575 Hrs....................................................................................$37,500 2004 CASE CX160, Stk# U17892, 2525.0 Hrs ..........................$55,000 2007 CASE CX460, SN: N6SAS7001, 11' 1" Stick, 36" pads, Aux. Hyd, 60" bucket, 1145 Hrs ..............................................................$165,000 1999 KOMATSU PC150LC-6K, SN: K30741, 3519 Hrs, Hyd. Quick Coupler, Cab/Heat/AC/Radio, Hyd. Thumb, 24" & 48" Bkts........$45,000 2001 LINK-BELT 210 LX, Stk# U17764, 2204.0 Hrs ................$68,000

MOTOR GRADER 2003 PSI MG622, Stk# 9193, 674 Hrs......................................$49,500

CRAWLER DOZER 1999 CATERPILLAR D6R XL, Stk# U18996, 8700 Hrs..............$69,500

ASPHALT / PAVING / CONCRETE EQUIPMENT 2002 VOGELE 780WB, Stk# U18724 ........................................$49,500

2003 Cat D8R II WHA, s/n 6YZ01299, 10,049 Hrs .. ......$175,000

2000 Cat 988G, s/n 2TW00169, 13,913 Hrs.... ............CALL

2006 Cat D5N XL, s/n AGG02058, 223 Hrs ........ ......$112,000

2004 Cat 963C, s/n BBD01067, 6897 Hrs ...... ........$94,000

2005 Cat 345BL II, s/n AGS02635, 8300 Hrs ...... ......$115,000

2006 Cat 330DL, s/n MWP00441, 2061 Hrs ...... ......$189,000

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 7

631/643-2605 www.allislandequipment.com

Serving Nassau, Suffolk and the Five Boroughs since 1970

FEATURED PRE-OWNED MACHINERY THIS WEEK'S SPECIAL The LeeBoy 8816B Asphalt Paver is the perfect tool for government agencies or contractors on street and highway projects and in large commercial paving applications.

2006 Leeboy 8515 Very Clean, Electric Screed, 176 Hrs

$79,000

John Deere 570A

Gehl 4640

Cab, Very Clean, Power Shift Transmission, Front Dozer Blade

2006, 1300 hrs

$16,900

$8,995

Gehl 5635

Kobelco SK-35

1998, high flow, new 12x16.5, 14 ply tires, 70” bucket, 3400 hours

Very Clean, 600 Hrs

$8,500

$27,500

Takeuchi TL-140

Leeboy 5000 Path Paver

2004, 1800 Hrs

Rent for $750 a Day Buy for $52,000

5’-9’ Paving Width

$18,900

Rosco's Maximizer 3 asphalt distributors are engineered to deliver accurate, uniform and economical applications of liquid asphalt. Maximizer 3 adds to these features the exclusive EZ Spray extending spraybar. It provides the environmentally friendly and efficient Enviro-Flush cleanout system and straightline start and stop. Rosco spray patchers are the most versatile tools for road maintenance on the market today. We offer Rosco RA300 truck mounted patchers that can do it all...including cleaning the surface to be patched, spraying tack coat onto the surface, combining aggregate and hot asphalt to fill and repair, and finishing the job with a final dust coat of aggregate. Rosco spray patchers make it easy!

Page 8 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Pine Bush Equipment Holds Annual Charity Golf Event

ine Bush Equipment held its 4th annual golf tournament May 4 at the Town of Wallkill Golf Club in Middletown, N.Y. “It was a beautiful day and the event was very successful,” said Simra Alfonso, co-chairman OF the event. “All proceeds were donated to the American Cancer Society. We wish to thank everyone who assisted us with this great cause. We at Pine Bush Equipment truly understand the difficulties everyone is facing in this economy and are grateful for any help that we were given. Through the efforts of this event, we were able to raise $7,000 for the American Cancer Society.” According to Carl Sherman, co-chairman of the event and employee of Pine Bush Equipment, “Over the last four years between the efforts of the golf tournament and the Pine Bush Equipment Relay for Life team, we have been able to donate over $50,000 to help fight cancer.” Pine Bush Equipment thanked the following sponsors: Kubota, which sponsored dinner; Komatsu (lunch); U.S. Bank (longest drive); and Doosan Infracore (straightest drive). Gifts, prizes, awards and raffles were donated by: • Aldred Preserve • Allied Excavating • Bottini Fuel • Boyce Excavating • Commonwealth Advisors Ltd. • Catskill Hudson Bank • Fairview Insurance Agency • Kristt Company • IronPlanet • McCabe & Mack LLP • Wagner & Associates Inc. Sponsorships were donated by: • Aflac • Benefit Mall • Cumulus • Debbie Boniface • Emblem Health • Esco Corporation • Fairview Associates • Felling Trailer • Hudson Valley Magazine • Landpride • Mohonk Mountain House • Ronnie Boniface • Rondout Golf Club • S & S Safety • Swan Lake Golf Course • TD Bank • The Lucerne Hotel • Ulster Uniform • Wanda Temple-Roebuck • Walden Savings Bank • XLS Imports, LLC – Greg Lieb

The stunning Town of Wallkill Golf Club in Middletown, N.Y., hosted the 4th annual Pine Bush Equipment Golf Tournament.

After a spirited round of golf, participants gather for a delicious dinner, which was sponsored by Kubota. An on-course lunch was provided by Komatsu. Jimmy Boniface (R) and Carl Sherman draw the door prize winners.

Some of the volunteers instrumental in making this year’s event run smoothly (L-R) are Dorothy Bodnar, Simra Alfonso, Jimmy Boniface (front center), Donna Boniface and Carl Sherman.

Holly Bodnar (L) and Donna Boniface were both extraordinarily pleased with the support given by both their customers and their suppliers to the American Cancer Society.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 9

QUALITY USED EQUIPMENT • VALUE & PERFORMANCE ASSURED

1985 CAT 988B, S/N 50W7075, 52 Hrs, CAT Certified Power Train Rebuild, 11,420 Frame Hrs, 52 Hrs on PT............................$349,000

2007 CAT 963C, S/N BBD3113, 1157 Hours, AC, GP, 3V for MP Bkt or Ripper, From Dealer's Rental Fleet ........................$159,000

2007 CAT D8T, S/N KPZ02173, 157 Hrs, AC, 8SU, Ripper Valve ............................$499,000

Air Compressor

Lift - Boom

2009 Sullair 1150XH, S/N: 2009012600; 26 Hours; New Condition, Low hours, 900/1150 CFM Towable Air Compressor ........................$123,000 2008 Sullair 1150XH, S/N: 2008121900; 465 Hours; 1150 CFM Air Compressor 350 PSIG @ 1150CFM & 500 PSIG @ 900CFM ....$110,000

(4) 2006 GENIE S40, S/N 10229, 10184, 10171, 10225, Genie S40 Self Propelled Aerial Work Platform......................................$28,500-$33,000 2007 GENIE Z34/22DC, S/N: 7327; 5 Hrs ....................................$24,800 (3) 2006 GENIE Z45/25JRT, S/N 30136, 30129, 30136, 10225, Self Propelled Aerial Work Platform......................................$32,000-$38,000 2007 GENIE Z60/34RT, S/N: 7625; 60' Articulating Boom Lift ....$58,975

Compaction Equipment - Walk/Tow Behind 1999 RAMMAX RW1404, 258 Hours; 33" drum Rammax trench rollerready to work ................................................................................$5,900

Dozer - Crawler

2007 CAT 953C, S/N BBX3020, 624 Hours, AC, GP Bucket, 2 lever control. From Dealer's Rental Fleet ......................................$145,000

2005 CAT D5G LGP, S/N RKG1641, 1,886 Hours, OROPS, PAT, From Dealer's Rental Fleet ....................................................................$59,000 2007 CAT D5G XL, S/N: WGB3661; 1,015 Hours; OROPS, Accugrade ready. From Dealer's Rental Fleet ................................................$77,000 2006 CAT D6R DS XL III, GJB333; Stk #: KGJB333; 2,435 Hours; DS,AC,6SU,70% UC System1, Call Bob Kukulski 732-261-8445 ............................................................................$194,000 2007 CAT D6T LGP, S/N: KJL451; Stk #: KKJL451; 2,997 Hours; AC, Contact Bob Kukulski for details. 732-261-8445 ......................$249,000

2007 GENIE GS2646, S/N 85785, 73 Hours ..................................$7,500 (2) 2006 GENIE GS4390RT, S/N 43006, 43659, 43' RT Self Propelled Scissor Lift ............................................................................$21,000 Ea. 2007 GENIE GS5390, S/N 44796; Contact Ed Gudaitis 732-885-8032 ..............................................................................$47,000

Light Tower 2007 GENIE TML4000N, S/N 543; 716 Hours; 4 1000 watt towable light tower with generator......................................................................$4,500

Other Equipment 2007 E3000 Ground Heater, S/N 02195, 2,200 Hours; ground heater with onan generator ....................................................................$41,500 (2) 2006 HX50 Ground Heaters, S/N 295, 368 ..........................$600 Ea. (2) 2006 HX100 Ground Heaters, S/N 370, 466 ..................$975-$1000

Excavator - Mini (up to 12,000 lbs)

Skid Steer

1999 CAT 301.5, S/N: 3YW477; 2,532 Hours; OROPS, 16" bucket. Machine sold "as is,where is" ........................................................$9,500

Forklift - Mast 2001 CAT GPL40, 1,591 Hours; 9,000 lb, propane-powered ......$11,500

Forklift - Telescopic 2004 CAT TH560B, S/N: SLG445; 3,676 Hours; Customer Consignment, Cab, AC, Stabilizers, Pallet Forks and Bucket, Sold "AS IS"..........$55,000 2008 CAT TL943, 848 Hours; 9,000 LB Telehandler, 43' High Reach 4WD Stabilizers............................................................................$77,500 2007 Genie GTH644, S/N: 10521, 928 Hours; 6,000 LB Telescopic Forklift, 44' Reach........................................................................$35,500 2007 Genie GTH844, S/N: 10501, 577 Hours; 8,000 LB Telescopic Forklift, 44' Reach........................................................................$39,000

Generator Sets

2006 CAT CP-563E, S/N CNT1103, 797 Hrs, OROPS, From Dealer's Rental Fleet ..$85,000

Lift - Scissor

2001 CAT 365BL, S/N: 9TZ515; Stk #: C9TZ515; 10,092 Hours; Customer consignment machine located in Brooklyn NY, Contact Tom Alfano for details 732-126-8430 ................................................$135,000

Excavator - Crawler

2001 CAT XQ60, 10,505 Hours, Mobile diesel generator, self contained UL142 double wall fuel tank, dual voltage, accessory panel........$15,000 2001 CAT XQ105, 5,200 Hours; Mobile diesel generator, self contained UL142 double wall fuel tank, dual voltage, accessory panel........$17,000 (2) 2000-2002 CAT XQ125, 7,265-9,120 Hours; Mobile diesel generator, self contained UL142 double wall fuel tank, dual voltage, accessory panel ......................................................................................$22,000 Ea. 1999 CAT XQ225, 11,400 Hours; Mobile diesel generator, self contained UL142 double wall fuel tank, dual voltage, accessory panel........$35,000 2005 CAT XQ400, 3,175 Hours; Mobile diesel generator, self contained UL142 double wall fuel tank, dual voltage, accessory panel........$80,000 2006 Multiquip DCA125USJ, S/N: 8500500; 2,535 Hours; 110KW(137KVA) Ultra Silent Whisperwatt Generator..................$22,500

2006 CAT 735, S/N BIN503, 2,936 Hours; A/C, From Dealer's Rental Fleet ....................$249,000

2006 CAT 430E ST, S/N EAT245, 527 Hrs, Cab/Air, E-Hoe, 4WD, GP Bkt/24”, From Dealer’s Rental Fleet ..........................$73,000

2008 CAT 226B II, S/N MJH12218, 116 Hours, Cab, Heat, Manual CPL, GP, From Dealer's Rental Fleet ....................................................$34,000 (2) 2008 CAT 236B II, S/N HEN8070, HEN7724, From Dealer's Rental Fleet ......................................................................................$35,000 Ea. 2009 CAT 246C, S/N JAY2847; 36 Hours; AC, Manual Cpl, GP, From Dealer's Rental Fleet ....................................................................$42,000 (3) 2007 CAT 252B, S/N SCP4732, SCP3935, SCP3962, From Dealer's Rental Fleet ....................................................................$39,000-$41,000 (3) 2007 CAT 256C, S/N DWS298, DWS299, DWS381, From Dealer's Rental Fleet ....................................................................$39,900-$48,000 2006 CAT 277B, S/N MDH3787; 1,031 Hours; New Tracks and Front Idlers, NO AC, GP, From Dealer's Rental Fleet ............................$35,000 (3) 2005-2006 CAT 287B, S/N ZSA3286, ZSA2982, ZSA1853 .................. ........................................................................................$26,000-29,900 (2) 2007 CAT 297C, S/N GCP261, GCP300 ......................................CALL

Trencher / Boring Machine / Cable Plow 1996 TESMEC 900SLO, S/N 9173; Stk #: 9173; 2,683 Hours; Customer Consignment, Contact Earl Harrar 908-561-8005 WXT 508 ......$175,000

Wheel Loader

2008 CAT D4K XL, S/N MMM239, 1,137 Hrs, A/C, PAT Blade, System One Undercarriage..... ..........................................................$99,000

2008-2009 CAT 950H, S/N K5K2515, K5K1729 ........$205,000-$229,000 2006 CAT 966H, S/N A6D334; Stk #: KA6D334; 4,624 Hours; AC, GP, Call Bob kukulski 732-261-8445................................................$220,000 2007 CAT 972H, S/N A7D364; Stk #: KA7D364; 2,713 Hours; AC, Call Bob Kukulski 732-261-8445 ......................................................$270,000 2008 CAT 980H, S/N JMS4209; 1,967 Hours; AC, Ride Control, 60% Tires Remaining, 7 CY GP Bucket, Call Bob Kukulski 732-261-8445 ........ ..................................................................................................$359,000

Used parts • Quality parts • Attachments Ar e you looking for a r eliable sour ce for quality used components and par ts? Outback Parts is linked nationwide with three used parts networks, so finding dependable parts fast and conveniently is never a problem. Outback Parts also supplies replacement parts for Non-Cat® machines. So when you’re needing parts, call or visit us on-line.

CAT AP1055 PAVER, S/N ABB363, 3466 Hrs, AAS2301 Screed 10-18' ....................$95,000

Call: 732/885-3005 Fax: 609/443-1146 jmeyer@foleyinc.com

W e b u y u s e d a n d s a l v a g e d m a c h i n e r y. Specializing in used Caterpillar® parts. Place your parts requests on-line at www.outbackparts.com

2008 CAT D3K LGP, S/N LLL437, 285 Hours; OROPS, PAT, From Dealer's Rental Fleet ........ ..........................................................$79,000

www.foleyinc.com Call Art Vida, Used Equipment Manager 800-939-6611 • 732-885-5555 • Fax: 732-457-0551 855 Centennial Avenue, Piscataway, NJ 08855

Page 10 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

PLASTERER EQUIPMENT CO., INC. Serving Contractors, Municipalities, and Industry since 1912 Special pricing good through 06/30/10 – cash or approved financing Subject to prior sale – Rental purchase not available 2001 John Deere 310SG Backhoe, Unit# 27780, 1565 Hrs, Cab w/Interior Trim, Suspension Fabric Seat, Synchroshift M Fwd Axle, 12.5/8018’/19.5Lx24 Rear, Extendable Backhoe, Five Function Valve, Two Lever Controls, Less Auxiliary Plumbing, Std Stab w/Rev Feet, Ldr w/Rtd & 2 Func Hyd, 7645-1.30 Cu. Yd. Lng Lip Ldr Bkt, 1150 Lb Frt Counterweight, Two Batteries-300 Min Cap, Chrome Exhaust Extension, OPS STAT Roof w/Deluxe Light, Electric Ether Starting Aid, 95 AMP Charging System, Frt Windshield Washer ....$34,900

2000 John Deere 160LC Crawler Excavator, Unit# 25849, 600 MM Triple Semi-G Shoes, Aux. Lines on Boom/Arm ...... ............................................................................$34,900

2008 John Deere 313, Unit# 41460, No package, Tires 10x16.5 Hauler, Hyd Cir Std, 2" Seat Belt w/ shoulder strap, std foot controls, electric quick tach, backup alarm kit, cab enclosure w/ wiper kit, deluxe wire harness, heater w/ defroster kit, rear counterweight, suspension seat kit, horn, PT & Hyd secure expires 8/13/2010 or 2000 Hrs ..........$18,450

2008 John Deere 315, Unit# 41462, Tires 10x16.5 Hauler, Hyd. Cir Std, 2” Seat Belt w/Shoulderstrap, Standard Foot Controls, Electric Quick Tach, Backup Alarm Kit, Cab Enclosure with Wiper Kit, Deluxe Wire Harness, Heater with Defroster Kit, Rear Counterweight, Suspension Seat Kit, Horn, PT&HYD Secure Expires 9/8/2010 or 2000 Hrs. ....................$19,350

BACKHOES 2004 John Deere 310SG, Unit# 29297, cab w/ interior trim, suspension fabric seat, powershift MFWD axle, 12.5/80-18 ft/19.5Lx24 rear, extendable backhoe, five function valve, two lever controls, less auxiliary plumbing, ext stab w/rev feet, ldr w/rtd and 2 func. hyd, 1.30 cu yd lng lip dlr bkt, 1150 lb. frt counterweight, two batteries-300 min cap, chrome exhaust extension, ops stat roof w/deluxe light, AM-FM radio, electric ether starting aid, 95 amp charging system, bucket cylinder (heavy duty) ..........$34,600 2003 John Deere 310SG, Unit# 27610, cab, 4x4, extendable backhoe, two lever controls, ride control, suspension fabric seat, aux plumbing, 1.3 cu. yd. GP bucket, AM-FM radio......................................................................................................................$35,675 COMPACTOR/ROLLER 2006 Sakai SV201D, Unit# 41438, 304 Hrs, 54" Drum Width, Operating Weight - 9590 Lbs., ROPS ..........................................................................................................$35,900 CRAWLER DOZERS 2005 John Deere 550J, Unit# 25842, Long Track, Rear Chain Guides, 105" Blade C Frame, Hyd. Pump F Use w/o Winch, Radio, Retrieval Hitch, Chrome Exhaust, Ether Start Aid, Three Function Valve, Dual Batteries, Cab w/Heater Air Cond., AT167392 18" Std Lub Trk Shoe, Track Adjuster Relief Valve, Operator Station Accessories, Environmental Drain, Deluxe Cloth Suspended Seat....................................................................................$51,000 2004 John Deere 700H, Unit# 27510, 1705 Hrs, Hydrostatic Transmission, Cab w/AC, Angle Blade, Extra-Long Track ..............................................................................$79,900

2002 John Deere 650H, Unit# 27676, Power-Angle-T Blade, Hydrostatic Transmission, Long Track, 105" Blade, ROPS ..........................................$34,900 2003 John Deere 755C II Crawler Loader, Unit# 27756, Cab w/Heater Air Cond, Lub Tr 20” 508MM Dbl Grouser, Heavy Duty Rear Bumper, GP Bkt, CRL006, Standard Track, Hyd. Transmission .. ..........$67,500

CRAWLER EXCAVATORS 2000 John Deere 50ZTS, Unit# 27782, Excavator w/ Canopy, Hydraulic Thumb, Rubber Track ....................................................................................................................$12,500 2002 John Deere 230CLC, Unit# 29170, 5994 Hrs, 32” Pads, 11’10” Arm, Aux Hyd ...... ..........................................................................................................................$71,000 2005 John Deere 450CLC, Unit# 21297, 2567 Hrs, Counter Weight Removal, Standard Boom, 12’10” Arm, 36” Pads ............................................................................$184,525 CRAWLER LOADERS 2006 John Deere 605C, Unit# 27606, GP Bucket, Cab w/AC, V Pattern Control..$62,500 2006 John Deere 605C, Unit# 41488, V-Pattern Trans Control, Lub TR 18" 457MM Dbl Grouser, Cab w/Air w/Mech Cloth Seat, 1.63 GP Bkt w/teeth/back drg, 2 Addtl Lights on Cab Front, Air Susp. Cloth Seat, Seat Backrest Extension, Radio Installation, PT&Hyd Secure Expires 6/30/2011 or 3000 Hrs ..................................................................$75,000 SCRAPER 1976 John Deere 762, Unit# 25838, Cab, A/C, 23.5x25 Tires................................$9,850 SKID STEERS 2008 John Deere 313, Unit# 41459, Tires 10x16.5 Extra-Wall, Hyd Cir Std, 2" Seat Belt w/o shldr strap, standard foot controls, backup alarm kit, horn, PT & Hyd secure expires 9/8/2010 or 2000 Hrs ..............................................................................$16,250

LEBANON, PA

SELLERSVILLE, PA

BETHLEHEM, PA

LEWISBERRY, PA

2550 E. Cumberland St. (717) 273-2616 (800) 225-4001

3215 State Rd. (215) 258-5700 (800) 523-2209

400 Stoke Park Rd. (610) 867-4657 (800) 587-9790

640 Lowther Rd. (717) 938-6568 (866) 787-0001

FOR QUALITY NEW AND USED JOHN DEERE EQUIPMENT, BE SURE TO VISIT OUR WEBSITE: www.plasterer.com

For additional information, please contact Jim Sagl at (610) 972-7994

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 11

D RE U T A CH E F NU N T A. A I S. M U.

RE E E V S E RV I C SE

UN MAION DE

I WANT YOU TO BUY THE RIGHT STUFF! TO BUY THE RIGHT STUFF!

MIL AWI TA R WI ARD Y NN ER

OUTPERFORMS – OUTLASTS ALL OTHER TRAILERS

ROGERS 50/55 TON GENTLE RISER

ROGERS 35/40 TON GENTLE RISER Rogers 35/40 Ton Gentle Riser, Loaded with Equipment ..........................IN STOCK

Rogers 50/55 Ton Gentle Riser, Loaded with Equipment ........................................................IN STOCK

IN STOCK!

STEPHENSON EQUIPMENT, INC. USED TRAILERS w w w. k e e s l e r s . c o m

Harrisburg, PA 800/325-6455

USED EQUIPMENT w w w. s t e p h e n s o n u s e d . c o m

www.stephensonequipment.com Philadelphia, PA 610-534-0700 eesler Division

Lancaster, PA 800-347-6998

Wilkes-Barre, PA 866-667-6756

Pittsburgh, PA 800-692-7600

Syracuse, NY 800-368-6455

Albany, NY 518-357-2200

Page 12 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

DEMOLITION • RECONSTRUCTION

LARGEST SPECIALIZED FLEET IN NORTH AMERICA

RENTING NATIONWIDE EXCAVATORS 16,000 LB - 180,000 LB

ENVIRONMENTAL • RECYCLING

LaBounty

Michael McKenna Named AGC of N.J. Member of the Year

We’re in the business of eliminating obstacles. 2nd and 3rd Member Mounted ROTATING SHEARS HIGH REACH and HD-XTENDED REACH DEMO UNITS ULTRA LONG REACH FRONTS HAMMERS - 3,000 LB - 13,500 LB UNIVERSAL PROCESSORS CONCRETE PULVERIZERS GRAPPLES AND BUCKETS TRANSPORTATION AVAILABLE

1-877-667-1998 www.newmillenniumrentals.com

SHEAR ECONOMICS RENT WHAT YOU NEED. BUY WHAT YOU WANT.

Rent the right attachment for the job!

New Your Attachment Rental Specialist Millennium Rental s, Inc.

AUTHORIZED DISTRIBUTOR

Member: The Brotherhood of Operating Engineers Member: National Assoc. of Demolition Contractors Peter E. Menner, President

Carl Cosenzo (L) presented the annual Richard L. Forman Member of the Year Award to AGC of N.J. Associate Member Michael McKenna.

ADMAR Names Nechwedowich as Its Albany Branch Manager ADMAR Supply recently hired Jim Nechwedowich as branch manager of its Albany region. Nechwedowich brings more than 10 years of construction equipment sales and rental experience to his new role. As branch manager, Nechwedowich will be responsible for the day-to-day operation of the Albany branch including sales, service, and parts. As part of ADMAR Supply’s commitment to providing support to the professional contractor market,

Nechwedowich will be responsible for continuing ADMAR’s growth in this critical region. Prior to joining ADMAR, Nechwedowich managed two stores for United Rental in Modesto, Calif., where he successfully increased revenue while improving operational efficiencies. Nechwedowich resides in Albany, N.Y. For more information, call 585/214-4795 or visit www.admarsupply.com.

Keep Up With All the Industry News Subscribe to

Construction Equipment Guide Today! Toll Free 800/523-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 13

USED EQUIPMENT CLEARANCE! fLfS O A THE #1 SOURCE FOR SALES, RENTALS, PARTS AND SERVICE. ENT 3A0L% R L LOCATIONS TO ils

eta

D For

RE MO MENTR IP VE EQUAN E RE! TH EFO B

SERVE YOU BETTER

WILLIAMSTOWN, NJ • PISCATAWAY, NJ • MEDFORD, NY • BRONX, NY • MARLBORO, NY

CATERPILLAR IT38G FOR SALE

Equipment Specifications Year 2001, Manufacturer Caterpillar, Model IT38G, Location Williamstown, New Jersey, Serial Number IT38GKCSX00393, Condition Used, StockNumber H01820, General Information Bucket, Forks

$64,900

2000 DAEWOO SOLAR 170 III

Equipment Specifications Year 2000, Manufacturer Daewoo, Model SOLAR 170 III, Location Williamstown, New Jersey Serial Number 0088, Condition Used, Stock Number H01670, Hours 4,693, Horse Power 113, General Information Cab, Hammer Plumbing.

$34,900

2006 JCB 8060

Equipment Specifications Year 2006, Manufacturer JCB, Model 8060, Location Piscataway, New Jersey, Serial Number 684944, Condition Used, Stock Number H01574, Hours 525, Horse Power 59, General Information Cab, Hammer Plumbing.

$49,500

SEE OUR WEBSITE FOR COMPLETE LISTINGS.

2001 GROVE

RT650E

2007 DEERE 310SG

Equipment Specifications Manufacturer Deere, Model 310SG, Location Piscataway, New Jersey, Serial Number T0310SG952693, Condition Used, Stock Number H02020, Hours 310, General Information Like new, low hours, air suspension seat, pilot B/H controls, extend-A-hoe.

$58,500

2005 LEEBOY 8515

Equipment Specifications Year 2005, Manufacturer Leeboy, Model 8515, Location Marlboro, New York, Serial Number 8515T-43806, Condition Used, Stock Number N00042, Hours 310, General Information Poly Steel Tracks, Hose Reels,Trimble Grade Control, Sonic Augers, Steering Wheel, Electronic Steer.

$78,500

Equipment Specifications Year 2001, Manufacturer Grove, Model RT650E, Location Piscataway, New Jersey, Serial Number 221671, Condition Used, Stock Number H01953, Hours 9,653, Horse Power 59.

$237,500

WE CARRY A FULL LINE OF EARTHMOVING, LIFTING, DEMOLITION AND LANDSCAPING EQUIPMENT

MAIN OFFICE PO BOX 669 300 SOUTH RANDOLPHVILLE ROAD, PISCATAWAY, NJ 08855-0669 – 732.752.3600 BRANCH OFFICE - 22 PECONIC AVENUE, MEDFORD, LONG ISLAND, NY 11763 – 631.207.2900 SOUTHERN NJ BRANCH OFFICE - 2610 SOUTH BLACKHORSE PIKE, WILLIAMSTOWN, NJ 08094 – 856.875.0036 BRONX - NEW YORK CITY - 1130-D ZEREGA AVE, BRONX, NEW YORK 10462 – 718.822.1180 MARLBORO - NEW YORK - 1440 ROUTE 9W, MARLBORO, NEW YORK 12542 – 845.236.3000

WWW.HOFFMANEQUIP.COM

Page 14 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bobcat and Doosan Hold ‘Dawn of New Day’Demo inLake City,Georgia

obcat and Doosan held a media event June 3 at the Lake City, Ga., branch of Bobcat to introduce several new models to the press and sales representatives. The event, coordinated by Two Rivers Marketing in Des Moines, Iowa, was titled “The Dawn of a New Day for Doosan and Bobcat” and was packed with machine and attachment presentations and plenty of time for hands-on machine demo time. Some machines displayed to the media are yet to be introduced for sale.

A packed busload of media representatives converged on Lake City, Ga., and the branch facility of Bobcat of Atlanta, which hosted this year’s Bobcat Doosan new product presentations and demonstrations.

During the product presentations, Bobcat’s product marketing manager, Bryan Zent, opens up a Bobcat E45 compact excavator to show the total accessibility of the machine’s components. Showing the versatility of a Bobcat E35 with a rotating grapple attachment, which is a perfect match for placing landscape boulders, is Jason Buchholz, excavator product trainer of Bobcat, West Fargo, N.D.

Doosan Sales Training Manager Bill Metzgar (R), based in Atlanta, Ga., provides final instructions to one of the press representatives on operating the recently introduced Doosan DL420 wheel loader. Boasting more power and other upgrades, the new DL420 now replaces the DL400 model. Construction Equipment Guide’s Kent Hogeboom (in cab) gets a few operating pointers from Bobcat’s Justin Odegaard before testing his operating skills on a soon to be released Bobcat track machine.

Ready and waiting for the next group to demo one of the four all-new Bobcat utility vehicles (L-R) are Rob Gilles, Lance Mathern and Brad Claus of Bobcat, West Fargo, N.D.

Better than spending the day in the office, a press representative enjoys a leisurely “spin” around the demonstration track behind the wheel of a Bobcat 3400 4-wheel drive utility vehicle.

Gaining more information on the Doosan Moxy product line is Christina Schave of Two Rivers Marketing in Des Moines, Iowa. Ed Harseim, Doosan SE district manager points out some of the features of the Doosan Moxy MT41 articulated truck including overall haul capacity and some of the features of the tandem axles.

Monitoring the progress of an operator of the new Doosan DX140 LCR excavator is Chad Ellis (R), Doosan product manager, Atlanta, Ga. The reduced tail swing machine makes it more versatile for working in congested job sites and close to buildings and walls.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 15

Albany, NY

NEW YORK Batavia, NY

Syracuse, NY

(518) 220-9500

(585) 344-1931

(315) 437-2611

Page 16 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Powerful Solutions

T r u c k s zC r u s h e r s zD u m p zS e m i zF a r m zE q u i p m e n t zC o m m e r c i a l F o r k l i f t s zD i g g e r s zD i r t M o v e r s zD o z e r s zT r a c t o r s zT r a i l e r s zS k i d d e r s L o a d e r s zB a c k h o e s zO f f - H i g h w a y zY e l l o w S t e e l zR o a d T r a c t o r s

Heavy equipment you need at a fraction of the price.

Takeuchi understands the needs of the industry and responds with solutions. Compact Track Loaders Compact Wheel Loaders Compact Excavators

Lightly-damaged and consigned heavy-duty trucks and industrial equipment enter our nationwide auctions every week. Get online, register and receive email alerts when what you’re looking for shows up. It’s simple and cheaper than buying new.

First With Online Salvage

814.827.0300 SalvageDirect.com Salvage Direct, Inc.

42336 Gilbert Drive

Titusville, PA 16354

Enter to win a free Charlotte Motor Speedway vacation on WhySalvageDirect.com

Contact your full service dealer for more information Track loaders feature high sprocket double reduction planetary reduction final drives which provide the most efficient use of power for more traction and digging force. Wheel loaders feature pushbutton 100% front and rear axle differential lock which provides immediate traction for superior digging and lifting power. Excavators feature pressure compensating piston pumps which provide smooth multi-function operation with unmatched breakout force and control.

USED TRUCK & EQUIPMENT SALES 1361 Conshohocken Rd., Plymouth Meeting, PA 19462

(610) 277-0100 DUMP TRUCK

CREW CAB

Driven to provide maximum functionality and performance. Try a Takeuchi and feel the power.

Contact your full service dealer for more information. 2000 Chev 7500, 3126 Cat, 6 Sp. 2005 Ford F550 Crew Cab, Aerial Lift Trans, A/C, Heated Mirrors, 57,550 $21,900 Diesel, Auto, A/C, 61,410 Miles $29,500 Miles.......................................$

953 Bethlehem Pike Montgomeryville, PA 215-699-5871

55 Sean Drive Eagle, PA 610-458-7054

2211 DuPont Highway New Castle, DE 302-652-3028

BACKHOES

DUMP TRUCK

The Power of Product and Support www.takeuchi-us.com

2001 Case 580M, 4x4-Ext, 3412 Hrs .. 2001 Sterling, 3126 Cat-8 Speed, $31,500 64,000 GVW ..........................$ ..............................................$ $39,500

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 17

Pine Bush Equipment Co, Inc.

Holmes, NY Branch

East PBE, Inc.

97 Route 302 Pine Bush, NY 12566

24 Sybil Court Holmes, NY 12531

283 Pane Road Newington, CT

Phone: (845) 744-2006 Call Jack (ext 232)

Phone: (860) 665-7470 Call Lisa (ext 232)

www.pbeinc.com • view our entire inventory online! • www.eastpbe.com

2009 NEW HOLLAND C175, STK # S03968C, S/N N8M487921, 116 HRS, FULL CAB W/AIR CONDITIONER, 12” RUBBER TRACKS, UNIVERSALE HYDRAULIC COUPLER, 74” GP BKT W/BOLT-ON-EDGE, HI-FLOW, AUXILIARY WORK LIGHTS, CALL EAST PBE! ..........................................................$34,500

2004 HYPAC C830C ROLLER, STK# R1939C, S/N 531030, 1146 HRS, 66" DRUM, CAB W/HEAT, CALL EAST PBE! ................$42,000

2003 KOMATSU D155AX-5, STK# D01598C, S/N 75191, 6605 HRS, CAB, A/C, SEMI U, TRASH RACK WASTE PACKAGE, VERY GOOD U/C, RIPPER HYDRAULICS, CALL EAST PBE! ........................................REDUCED $156,000

2007 KOMATSU PC160LC-7EO, STK # E02951, S/N K45064, 16’11” BOOM, 8’7” ARM, 24” GROUSER, TRACK FRAME U/C, PATTERN CHANGE VALVE, 36” BUCKET W/TEETH, CALL PINE BUSH! ..................................REDUCED $90,000

2004 KOMATSU PC200LC-7L, STK # E02867, S/N A87049, 18’8” STD BOOM, 9’7” STD ARM, 27.6” TRACK, MULTIPATTERN CONTROL, 42” BUCKET, CALL PINE BUSH! ............................................................................................$78,000

2007 KOMATSU PC160LC-7EO, STK# E02951, S/N K45064, 16’11” BOOM, 8’7” ARM, 24” GROUSER, TRK FRAME U/C, P/C VALVE, 36” BKT. W/TEETH, CALL PINE BUSH!........................................$90,000

EXCAVATORS 1989 CAT EL240LC, STK# E03096X, S/N 4JF00406, EXTRA 36" ROCK BUCKET, CALL PINE BUSH! ..................................................................$24,500 1996 HITACHI EX100, STK # E04174, S/N 1E301046, 4165 HOURS, EXCAVATOR W/ CAB, A/C, RADIO, STEEL TRACKS, BUCKET, CALL PINE BUSH! ....................................................................................................$24,500 HITACHI EX160LC-5, STK #E04002, S/N 13KP002216, 8400 HOURS, EXCAVATOR W/CAB & STEEL TRACKS, CALL PINE BUSH! ..................$24,900 2004 KOMATSU PC50MR-2, STK# E03426, S/N 5318, EXCAVATOR WITH 55'5" ARM AND AUX., 16" ROAD LINERS, A/C, 24" TRENCHING BUCKET, RUBBER TRACKS, CALL PINE BUSH! ..................................................$26,000 2004 KOMATSU PC200LC-7L, STK # E02867, S/N A87049, 18’8” STD BOOM, 9’7” STD ARM, 27.6” TRACK, MULTIPATTERN CONTROL, 42” BUCKET, CALL PINE BUSH! ..........................................................................REDUCED $78,000 2006 KOMATSU PC220LC-8, STK # E04116CR, S/N 70160, 2218 HOURS, 11'6" ARM, 28" GROUSER, 42" BUCKET, CALL EAST PBE! ................$114,500 2007 KOMATSU PC220LC-8, STK # E04130CM, S/N A88460, 2058 HOURS, CAB W/ AC, 28" GROUSER, 42" BUCKET, CALL EAST PBE!................$119,500 2002 KOMATSU PC228USLC-3, STK # E02641X, S/N 20922, 18’8” BOOM, 9’6” ARM, 42” BUCKET, CALL PINE BUSH! ..........................................$50,000 2004 KOMATSU PC228USLC-3, STK# E02583X, 910 HRS, 24” & 42” BUCKETS, HYD COUPLER, MECHANICAL THUMB, AUX HYD PIPING, 18’8” BOOM, 9’6” ARM, CALL PINE BUSH! ..............................................................$120,000 2005 KOMATSU PC300LC-7, STK# E01997C, S/N A86958, 2661 HRS, A/C, 10'6" ARM, STD. BOOM, 33" PADS, 48" BKT, CALL EAST PBE! ........................ ............................................................................................REDUCED $119,000

2007 KOMATSU PC300LC-7, STK# E01326C, S/N A86681, A/C, 2155 HRS, 33" PADS, 42" ESCO BUCKET, H.D. FRAME GUARD W/CATWALK, CALL EAST PBE! ....................................................................................REDUCED $144,000 2007 KOMATSU PC300LC-7 EO, STK # E02856R, S/N A89104, 2465 HOURS, 21’3” BOOM, 10’5” ARM, 28” TRIPLE GROUSER, NO BKT, CALL PINE BUSH! ..............................................................................................................$175,000 2005 KOMATSU PC300LC-7L, STK # E2497, S/N A86249, 5711 HRS, 13’4” ARM, A/C, CALL PINE BUSH! ................................................................$97,500 2006 KOMATSU PC400LC-7, STK# E02310C, 2161 HRS, STD BOOM, 11'1" ARM, 31.5" TRACKS, 54" BUCKET, CALL EAST PBE! ....................$199,000 2007 KOMATSU PC400LC-7, STK # E02859CR, S/N A87682, 2211 HOURS, STD. BOOM, 11’1” ARM, 31.5” TRACKS, NO BUCKET, KOMTRAX, CALL EAST PBE! ......................................................................................................$209,000 2007 KUBOTA KX080-3, STK# E03884C, S/N 11142, 270 HOURS, STEEL TRACKS, A/C, ROPS/FOPS CAB, DOZER BLADE, THUMB, CALL EAST PBE! .... ................................................................................................................$73,500 1992 LINK BELT LS-2700, STK # E03972X, S/N D4120814, 6000 HRS, EXCAVATOR W/GRAPPLE, CALL PINE BUSH! ..............................................$13,000

CRAWLER DOZERS 2003 CASE 850K, STK # D03536, S/N JJG0296716, NARROW GAUGE DOZER, 104” BLADE, CAB W/HEAT, A/C, CAB REAR SCREEN, CALL PINE BUSH!....................................................................................REDUCED $51,000 1998 DRESSER TD8H, STK # D02341X, S/N P036226, 2796 HOURS, GOOD CONDITION, 17" SHOES, OPEN ROPS, 6 WAY BLADE, CALL PINE BUSH! ........ ................................................................................................................$29,000 1997 KOMATSU D65EX-12, STK # D03650X, S/N 61881, DOZER WITH FULL CAB, CALL PINE BUSH! ........................................................................$57,500 2003 KOMATSU D155AX-5, STK# D01598C, 6605 HRS, CAB, A/C, SEMI U, TRASH RACK WASTE PACKAGE, VERY GOOD UNDERCARRIAGE, CALL EAST PBE! ....................................................................................REDUCED $156,000 SKID STEER 2005 BOBCAT T300, STK # S03630X, S/N # 525415665, TRACK LOADER, 88" HD BUCKET, 48" PALLET FORKS/FRAME, LANDSCAPE RAKE, CALL PINE BUSH! ....................................................................................................$36,000 1999 CASE 1845C, STK # S04128, S/N JAF0040954, 3320 HOURS, CALL PINE BUSH! ..............................................................................................$9,500 2004 KOMATSU SK820-5, STK # S03442X, S/N TF50093, SKIDSTEER WITH ROLLERS CAB, HEAT, PALLET FORKS, STEEL TRACKS, CALL EAST PBE! ..........$21,000 2007 BOMAG BW177D-40, STK# R2423C, 3 HOURS, 66” DRUM, ROPS2009 NEW HOLLAND C175, STK # S03968C, S/N N8M487921, 116 HRS, FOPS CALL EAST PBE!.......................................................................... $75,000 FULL CAB W/AIR CONDITIONER, 12” RUBBER TRACKS, UNIVERSALE BROS SPV627VA, STK# R04003, S/N 0137, 605 HOURS, 84" SINGLE DRUM HYDRAULIC COUPLER, 74” GP BKT W/BOLT-ON-EDGE, HI-FLOW, AUXILIARY VIBRATORY ROLLER, CANOPY, CALL PINE BUSH! ..............................$10,500 WORK LIGHTS, CALL EAST PBE! ..........................................................$34,500

*PRICES SUBJECT TO CHANGE AT ANY TIME *NOT RESPONSIBLE FOR MISPRINTS

HAUL TRUCKS 2006 KOMATSU HM300-2, STK # H02876, S/N 2009, HAUL TRUCK, 21.7 CU. YD. BODY, SCISSOR TAIL GATE, CALL PINE BUSH! ........REDUCED $199,000 DUMP TRAILER 1996 EZ DUMPER, EZ610DX, STK # T03324, CALL PINE BUSH! ..........$3,500 LOADER BACKHOES 2003 KUBOTA B21TLB, STK# T04061, S/N 61674, TRACTOR LOADER BACKHOE, CALL PINE BUSH! ................................................................$14,500 2007 KUBOTA B26, STK # B03235, S/N # 50324, 347 HOURS, LOADER BACKHOE W/HYD. THUMB, 3RD AUX. HYDRAULICS, 18” AND 66” BUCKETS, FRONT AND REAR WORKLIGHTS, FLIP PADS, CALL PINE BUSH! ......$29,900 OFF-HIGHWAY TRUCK 2002 MOXY MT31, STK# H02673X, 3400 HRS, HAUL TRUCK WITH TAIL GATE, CALL PINE BUSH!........................................................................$99,000 TRACTOR JOHN DEERE MODEL 80 TRACTOR, STK# E04224, S/N# X010160, CALL PINE BUSH! ..................................................................................................POR WHEEL LOADERS 2001 KOMATSU WA75-3, STK # W03846, S/N HA950798, COMPACT WHEEL LOADER, ROPS CAB, 1.05 CU. YD. BKT., CALL PINE BUSH! ..............$28,500 2001 KOMATSU WA380-3, STK# W02389CX, 9200 HRS, CAB, THIRD VALVE, FACTORY AUTO LUBE, NEW TIRES, 4.25 YD BKT, WELL MAINTAINED CALL EAST PBE! ..............................................................................................$80,300 2001 KOMATSU WA450-3MC, STK# W02330X, 10913 HRS, SOLID TIRES, 5 YD GP BUCKET, CALL PINE BUSH! ......................................................$78,900

Page 18 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SPECIAL LOW RATES ON THESE GREAT BUYS!

Aberdeen, MD Baltimore, MD Frederick, MD Greenwood, DE Upper Marlboro, MD

Folcomer.com

(800) 737-0049 (800) 218-9462 (800) 951-2550 (800) 756-9433 (800) CASE-580

FolcomerEquipment.com

Now on Facebook! Become a fan!

JCB Robot

JCB 214

JCB Loadall 525B

‘07 Case 321E, 450 hours……… …………………………….…..$48,500

‘06 Case 850K, cab and A/C, 320 hours…………….…..$74,500

Stock #321008

Stock #850K21

MORE DEALS! ‘08 Case 420CT Compact Track Loader, 10 hrs…....$28,500 Stock #42CT06

‘06 Case 440CT Compact Track Loader, 250 hrs.….$23,500 Stock #44CT03

‘05 Case 430 Skid Steer, cab and heat, 364 hrs…...$20,500

JCB 8027 Backhoes 2004 JCB 214 #U02084, Extradig, 6 in 1 bucket, excellent condition . $49,500 2006 JCB 214 #005311, 100 hp, auto shift, radials, servo, AC . . . . . . . . $62,000 2007 JCB 3CX-14 #U02352, Cab, powershift, servo, 6 in 1 bucket $66,000

Excavators 2005 JCB 8027 . . #005036, Canopy, rubber tracks, 18" bucket . . . . . . . . . . $24,000 2002 JCB 804S #04150 . . . Cab, rubber tracks, blade, aux hyd, 7,500# . . . $27,500

JCB 190T

Stock #UC1387

JCB 8060

2003 JCB 8060 #04157, Cab, rubber tracks, blade, aux hyd., 13,200# . $33,500

2005 JCB 190T #004916, Canopy, servo, 68" bucket . . . . . . . . . . . . . . . . . $27,750

2006 JCB 8080 #005350A, Cab, rubber tracks, blade, 24" bucket, 18,000#$75,000

2006 JCB 1110T-HF #005294, Canopy, servo, hyd. Coupler . . . . . $30,000

2008 JCB JZ140 #06628, Cab, standard dipper, 32,000# . . . . . . . . . . . . Call

Telehandlers

2006 JCB JZ140D #005351, Cab, blade, standard dipper. . . . . . . $90,000

1987 JCB 525B #U02355, Cab, 5500# capacity, 21' lift, Q-fit, 4WD . . . . . . . . $9,900

Skid Steer Loaders

Wheel Loaders

2006 JCB 180T #005329, Canopy, servo, 12.6" tracks . . . . . . . . . . . . . . . . $25,000

2007 JCB 407ZX #005730, Cab, 4WD, 1 yard bucket, hyd coupler . . . . . . $58,000

‘07 Case CX27B, 115 hours…… …………..…………………….$22,500

BUFFALO AREA

SYRACUSE AREA

(518) 356-5932

ROCHESTER AREA

BINGHAMTON AREA

BURLINGTON AREA

(585) 328-6380

(607) 775-2744

Buy Now! These deals won’t last long!

Rish Equipment Company Named New NPK Distributor NPK Construction Equipment Inc. has added Rish Equipment Company as its new distributor serving construction markets in Virginia, West Virginia, and Western Maryland. Sales of NPK hydraulic hammers, breaker buckets, pedestal boom systems, compactor/drivers, material handlers, grapples, and crushers will be handled through a dedicated sales manager and an experienced field sales group. According to Rish Equipment Company VP of Sales Jay W. Mullen, “NPK gives Rish more opportunities to sell its Komatsu hydraulic excavators because of the vari-

SCHENECTADY AREA

(315) 463-7333

Stock #445029

Stock #CX2705

CALL TODAY FOR MORE GREAT DEALS! (716) 684-9040

‘08 Case 445 Skid Steer, cab and A/C, 205 hrs..…...$29,500

(802) 864-0308

ous attachments NPK manufactures. The customer can utilize his excavator in more applications thus giving him more opportunities to obtain work.” Headquartered in Bluefield, W.Va., Rish Equipment Company has five locations in West Virginia, six locations in Virginia, and one location in Western Maryland. As well as NPK attachments, Rish is the authorized distributor of the full line of Komatsu mining and construction equipment, LeeBoy asphalt pavers, rollers and motor graders, Volvo Road Machinery products, Atlas Copco hydraulic and rotary blasthole drills, and Gorman Rupp pumps.

HARTFORD AREA

(860) 243-9723

What’s going on in your company? We want to know!

HELPING YOU

GET THE JOB DONE!

Give us a call.

Construction Equipment Guide

800/523-2200 or FAX 215/885-2910 WWW.LIFTECH.COM

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 19

Muncy • State College • Mechanicsburg • Centre Hall • Allentown • Shippensburg • Harrisburg • Philadelphia

+.).( .-

Bobcat of Philadelphia 210 Jacksonville Rd. Hatboro, PA 19040 1-800-679-2378

of Philadelphia

RENT or BUY

we sell and service over 50 brands! We Are Dedicated to MARCELLUS SHALE

WWW.BESTLINEINC.COM

& The Natural Gas Industry

Page 20 â&#x20AC;¢ June 23, 2010 â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ CONSTRUCTION EQUIPMENT GUIDE

+ 50 ton

+6/ 80 ton

+6/

110 ton

150 ton

200 ton

+6/

230 ton

300 ton

550 ton

HYLAB from Link-Belt, the industry leader in lattice boom cranes Â&#x2021; %HVW WUDQVSRUWDELOLW\ Â&#x2021; %HVW FDSDFLWLHV Â&#x2021; %HVW UHVDOH YDOXH Â&#x2021; %HVW GLVWULEXWRU DQG IDFWRU\ VXSSRUW

9HUPRQW Â&#x2021; 0DVVDFKXVHWWV Â&#x2021; 1HZ <RUN Â&#x2021; www.woodscrw.com

LINK-BELT CONSTRUCTION EQUIPMENT | www.linkbelt.com 7177-10

C A L L

U S

T O D A Y !

Y O U R

A U T H O R I Z E D

L I N K - B E L T

D I S T R I B U T O R

809

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 21

Lease machines these for for approx 12-18 Mo. . monthly re HALF the ntal rate!

Featured Featured Equipment Equipment

Used Equipment Showcase

I ARTICULATED DUMP TRUCKS

I EXCAVATORS

HYDREMA 912C, 2006, Stk# 01016598C, GOOD CONDITION, 1718 HRS .......................................$77,500

JOHN DEERE 120C, 2007, Stk# 0101631620, VERY GOOD CONDITION, 812 HRS ........................$85,000

JOHN DEERE 250D, 2006, Stk# 0101548648, GOOD CONDITION, 2634 HRS...............................$160,000

JOHN DEERE 120C, 2008, Stk# 0101642087, VERY GOOD CONDITION, 561 HRS ........................$87,000

JOHN DEERE 300D, 2006, Stk# 0101548659, GOOD CONDITION, 3760 HRS...............................$140,000

JOHN DEERE 160CLC, 2006, Stk# 0101576210, VERY GOOD CONDITION, 1383 HRS..................$92,500

JOHN DEERE 350D, 2004, Stk# 0101508712, AVERAGE CONDITION, 5138 HRS...........................$99,000

JOHN DEERE 200CLC, 2006, Stk# 0101567879, GOOD CONDITION, 2050 HRS ............................$89,000

JOHN DEERE 350D, 2005, Stk# 0101538797, AVERAGE CONDITION, 4413 HRS.........................$185,000 JOHN DEERE 350D, 2006, Stk# 0101559821, GOOD CONDITION, 3189 HRS...............................$175,000 JOHN DEERE 400D, 2003, Stk# 0101492376, AVERAGE CONDITION, 6555 HRS.........................$100,000 JOHN DEERE 400D, 2005, Stk# 0101538800, GOOD CONDITION, 4370 HRS...............................$195,000 JOHN DEERE 400D, 2005, Stk# 0101538799, AVERAGE CONDITION, 5396 HRS.........................$155,000

I BACKHOE LOADERS

JOHN DEERE 225CLC RTS, 2005, Stk# 0101538818, GOOD CONDITION, 2292 HRS.....................$99,000 JOHN DEERE 225CLC RTS, 2007, Stk# 0101615925, VERY GOOD CONDITION, 1225 HRS .......$105,000 JOHN DEERE 240DLC, 2006, Stk# 0101575941, GOOD CONDITION, 2119 HRS..........................$125,000 JOHN DEERE 240DLC, 2006, Stk# 0101576208, AVERAGE CONDITION, 2685 HRS....................$105,000 JOHN DEERE 240DLC, 2006, Stk# 0101574224, VERY GOOD CONDITION, 1743 HRS ...............$135,000 JOHN DEERE 350DLC, 2007, Stk# 0101633611, VERY GOOD CONDITION, 2428 HRS ...............$214,500 JOHN DEERE 370C, 2005, Stk# 0101548540, AVERAGE CONDITION, 4411 HRS...........................$99,000

JOHN DEERE 310J, 2009, Stk# 0101672168, VERY GOOD CONDITION, 512 HRS.........................$69,000

JOHN DEERE 450CLC, 2005, Stk# 0101538887, AVERAGE CONDITION, 4437 HRS ....................$199,000

JOHN DEERE 310SG, 2006, Stk# 960634A1, VERY GOOD CONDITION, 2000 HRS........................$49,000

JOHN DEERE 450DLC, 2007, Stk# 0101609731, GOOD CONDITION, 2785 HRS..........................$229,000

JOHN DEERE 310SG, 2006, Stk# 960661A2, VERY GOOD CONDITION, 2000 HRS........................$46,000

JOHN DEERE 450DLC, 2008, Stk# 0101655654, VERY GOOD CONDITION, 1920 HRS ...............$290,000

JOHN DEERE 310SJ, 2007, Stk# 0101622925, VERY GOOD CONDITION, 1322 HRS ....................$60,000

JOHN DEERE 600CLC, 2005, Stk# 0101551962, GOOD CONDITION, 3151 HRS ..........................$300,000

JOHN DEERE 310SJ, 2007, Stk# 0101623582, VERY GOOD CONDITION, 1125 HRS ....................$59,000

JOHN DEERE 80C, 2005, Stk# 0101541734, AVERAGE CONDITION, 2833 HRS.............................$39,000

I COMPACT EXCAVATORS

JOHN DEERE 80C, 2006, Stk# 0101581984, GOOD CONDITION, 1394 HRS ...................................$46,000

JOHN DEERE 27D, 2009, Stk# 0101109220, EXCELLENT CONDITION, 54 HRS .............................$28,500 JOHN DEERE 27D, 2009, Stk# 0101116790, VERY GOOD CONDITION, 299 HRS ..........................$26,500 JOHN DEERE 50D, 2007, Stk# 0101072127, VERY GOOD CONDITION, 791 HRS ..........................$39,000 JOHN DEERE 50D, 2007, Stk# 0101068726, 210 HRS .......................................................................$45,000 JOHN DEERE 60D, 2008, Stk# 0101097281, VERY GOOD CONDITION, 568 HRS ..........................$52,500

I COMPACT TRACK LOADER

NEW 2010 CAM 20 Ton Trailer – Deck Over Split Tilt, Full Wood Deck, 4' Diamond Plate Approach, Stk# 014340, S/N# 26103 Asking $19,500

I FORKLIFTS GENIE GES-45, 2007, Stk# 01016752D, GOOD CONDITION, 767 HRS.............................................$63,745 GENIE GE45/25, 2007, Stk# 01016752C, VERY GOOD CONDITION, 489 HRS.................................$54,425 GENIE GS-2668, 2007, Stk# 01016752A, VERY GOOD CONDITION, 453 HRS ................................$29,950 GENIE GS-2668, 2007, Stk# 01016752B, VERY GOOD CONDITION, 358 HRS ................................$29,950 GENIE GS1930, 2007, Stk# 010117973, GOOD CONDITION, 1 HR......................................................$6,500 GENIE GS1930, 2007, Stk# 010117965, VERY GOOD CONDITION, 1 HR...........................................$6,500

JOHN DEERE CT322, 2007, Stk# 0101069741, VERY GOOD CONDITION, 541 HRS ......................$27,500

GENIE GS1930, 2007, Stk# 010134059, VERY GOOD CONDITION, 1 HR...........................................$6,500

JOHN DEERE CT322, 2007, Stk# 0101073499, EXCELLENT CONDITION, 10 HRS .........................$36,500

INGERSOLL RAND VR1056C, 2007, Stk# 01016592, VERY GOOD CONDITION, 437 HRS..........$140,000

JOHN DEERE CT332, 2008, Stk# 0101077444, VERY GOOD CONDITION, 909 HRS ......................$29,000

INGERSOLL RAND 642C, 2006, Stk# 01016715A, GOOD CONDITION, 1160 HRS .......................$140,000

I COMPACTION EQUIPMENT

I HAMMER / BREAKERS

BOMAG 120AD, 2007, Stk# 01017091A, VERY GOOD CONDITION, 462 HRS.................................$28,000

INDECO HAMMERS IHC130, 2005, Stk# 01016702G, GOOD CONDITION, 1 HRS..........................$10,500

BOMAG 120AD, 2008, Stk# 01016650A, VERY GOOD CONDITION, 448 HRS.................................$27,000

INDECO HAMMERS 10000#, 2002, Stk# 01010000183, GOOD CONDITION, 1 HRS......................$55,000

BOMAG 145D-3, 2005, Stk# 01016658C, GOOD CONDITION, 884 HRS...........................................$32,000

INDECO HAMMERS 12000#, 2003, Stk# 0101002084, GOOD CONDITION, 0 HRS ........................$75,500

BOMAG 145D-3, 2007, Stk# 01017091E, VERY GOOD CONDITION, 384 HRS................................$45,000

INDECO HAMMERS 1750#, 2002, Stk# 01010000264, VERY GOOD CONDITION, 1 HRS................$5,000

BOMAG 177, 2007, Stk# 01017091F, VERY GOOD CONDITION, 455 HRS.......................................$65,000 BOMAG 177D-3, 2003, Stk# 0101061499A2, GOOD CONDITION, 1052 HRS..................................$36,000 BOMAG 213D-4, 2007, Stk# 01017133A, VERY GOOD CONDITION, 248 HRS................................$90,000 BOMAG 213D-4, 2007, Stk# 01017133B, VERY GOOD CONDITION, 368 HRS................................$99,000

INDECO HAMMERS 2000#, 2002, Stk# 01010001841, VERY GOOD CONDITION, 1 HRS .............$21,500 INDECO HAMMERS 2000#, 2004, Stk# 01010002098, VERY GOOD CONDITION, 51 HRS ...........$15,500 INDECO HAMMERS 3000#, 2003, Stk# 0101000983, VERY GOOD CONDITION, 38 HRS................$7,500 INDECO HAMMERS 5000#, 2005, Stk# 010100003743, GOOD CONDITION, 7 HRS......................$40,500 INDECO HAMMERS 6000#, 2004, Stk# 01010000283, GOOD CONDITION, 1 HRS ........................$18,000

BOMAG 266AD4, 2008, Stk# 01016650D, VERY GOOD CONDITION, 331 HRS ............................$113,000

INDECO HAMMERS 7500#, 2003, Stk# 01010001425, VERY GOOD CONDITION, 5 HRS .............$45,000

BOMAG 278D, 2007, Stk# 01016616, VERY GOOD CONDITION, 543 HRS....................................$116,000

INDECO HAMMERS 8000#, 2005, Stk# 01016702F, VERY GOOD CONDITION, 2 HRS...................$54,500

INGERSOLL RAND DD-90HF, 2004, Stk# 0101176986A1, VERY GOOD CONDITION, 1694 HRS..$39,000

INDECO HAMMERS 8000#, 2007, Stk# 01016747A, VERY GOOD CONDITION, 55 HRS ...............$94,500

INGERSOLL RAND DD-90HF, 2004, Stk# 0101178129A1, GOOD CONDITION, 1250 HRS.............$39,000

INDECO HAMMERS 8000#, 2007, Stk# 01016747B, VERY GOOD CONDITION, 1 HRS..................$94,500

I CRAWLER DOZERS

I SKID STEERS

JOHN DEERE 1050C, 2005, Stk# 0101538908, AVERAGE CONDITION, 2697 HRS.......................$196,000

JOHN DEERE 270, 2004, Stk# 0101934514A1, GOOD CONDITION, 765 HRS.................................$19,500

JOHN DEERE 450J, 2006, Stk# 0101568199, GOOD CONDITION, 1438 HRS..................................$43,500

JOHN DEERE 315, 2008, Stk# 0101093401, VERY GOOD CONDITION, 183 HRS...........................$20,000

JOHN DEERE 650J, 2007, Stk# 0101620598, VERY GOOD CONDITION, 1074 HRS.......................$82,500

JOHN DEERE 332, 2007, Stk# 0101066751, VERY GOOD CONDITION, 793 HRS...........................$30,500

JOHN DEERE 650J, 2007, Stk# 0101634089, EXCELLENT CONDITION, 358 HRS..........................$85,000 JOHN DEERE 750C, 2004, Stk# 0101933757A1, GOOD CONDITION, 2862 HRS ..........................$145,000 JOHN DEERE 750C, 2005, Stk# 0101529966, GOOD CONDITION, 2526 HRS...............................$122,000 JOHN DEERE 850C, 2004, Stk# 0101509304, AVERAGE CONDITION, 3648 HRS.........................$145,000 JOHN DEERE 850C, 2005, Stk# 0101528588, GOOD CONDITION, 2361 HRS...............................$105,000 JOHN DEERE 850J, 2006, Stk# 0101564176, GOOD CONDITION, 2531 HRS ...............................$170,000

I DEMOLITION TOOLS

2004 Ingersoll Rand DD-90HF Roller – 1248 Hours, Stk# 178129A1 Asking $51,000

I TRACTOR LOADER BACKHOE JOHN DEERE 110TLB, 2006, Stk# 0101038876, VERY GOOD CONDITION, 624 HRS ....................$30,000

I WHEEL LOADERS JOHN DEERE 444J, 2008, Stk# 0101650811, EXCELLENT CONDITION, 319 HRS........................$114,000 JOHN DEERE 544J, 2007, Stk# 0101613360, GOOD CONDITION, 1478 HRS ...............................$102,000 JOHN DEERE 544J, 2007, Stk# 0101623853, GOOD CONDITION, 1778 HRS..................................$99,000 JOHN DEERE 644J, 2006, Stk# 0101576214, GOOD CONDITION, 4199 HRS ...............................$119,000 JOHN DEERE 644J, 2006, Stk# 0101591669, EXCELLENT CONDITION, 1713 HRS......................$140,000

GENESIS EQUIP LXP200, 2008, Stk# 01016647, GOOD CONDITION, 40 HRS ................................$73,500

JOHN DEERE 744J, 2004, Stk# 0101593622A1, AVERAGE CONDITION, 6764 HRS.....................$115,000

GENESIS EQUIP LXP300, 2007, Stk# 01016602, GOOD CONDITION, 1 HRS ................................$191,500

JOHN DEERE 744J, 2007, Stk# 0101631888, EXCELLENT CONDITION, 1428 HRS ....................$265,000

GENESIS EQUIP LXP400, 2007, Stk# 01016606C, GOOD CONDITION, 1 HRS..............................$217,000

JOHN DEERE 824J, 2003, Stk# 0101586898A1, AVERAGE CONDITION, 9014 HRS.......................$83,000

Keith Price

Emilio Pescatore

Anthony Falzarano

Mike Hatter

Fairfield, NJ 07004 1275 Bloomfield Ave PH 973-227-2221 or 800-321-8080 FX 973-575-5553 WEB www.jesco.us

Lumberton, NJ 08048 1790 Route 38 PH 609-267-2020 or 888-217-0600 FX 609-261-8559 WEB www.jesco.us

S. Plainfield, NJ 07080 118 St Nicholas Ave PH 908-753-8080 or 800-241-7070 FX 908-753-7853 WEB www.jesco.us

Beacon, NY 12508 495 Fishkill Avenue PH 845-831-1800 or 800-724-0725 FX 908-821-1671 WEB www.jesco.us

2007 John Deere 410J TMC Backhoe Loader – Quick Coupler, Cab, A/C,, AM/FM/CD, 778 Hrs, Stk# 614483, S/N# 149664 Asking $79,000

Page 22 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Westchester Tractor, Inc. 60 International Blvd • Brewster, NY 10509

845/278-7766 Fax: 845/278-4431 E-mail: equip@wtractor.com

Now Serv ing All of Connectic ut

LATE MODEL EQUIPMENT

1998 New Holland 555E, Cold Start, Cab With Heat, 4277 Hours, Well Kept Machine ......................$24,995

2006 New Holland LB90, SN: 4612, 551 Hours, Pilot Controls, 1000lb Hammer, Full Cab ................$59,995

2004 New Holland LW170B, 3199 Hours, JRB Coupler ......$84,995

SKID STEERS 2010 NEW HOLLAND L180, SN:2032, 67 HOURS, DELUXE CAB, 2 SPEED, LIKE NEW MACHINE, 96” MULCH & SNOW BUCKET ..........................................................................................$33,395 2010 NEW HOLLAND L180, SN:2030, 41 HOURS, DELUXE CAB, 2 SPEED, LIKE NEW MACHINE, 96” MULCH & SNOW BUCKET ..........................................................................................$33,395 2010 NEW HOLLAND L185, SN:5906, PILOT CONTROLS, DELUXE CAB, 10 HOURS, 96” MULCH & SNOW BUCKET................................................................................................................$35,500 2010 NEW HOLLAND L185, SN:5903, 112 HOURS, DELUXE CAB, 2 SPEED, LIKE NEW MACHINE, 96” MULCH & SNOW BUCKET................................................................................SOLD $44,995 2010 NEW HOLLAND L185, SN:5912, 64 HOURS, DELUXE CAB, 2 SPEED, LIKE NEW MACHINE, 96” MULCH & SNOW BUCKET ..........................................................................................$35,500 2010 NEW HOLLAND L185, SN:5900, 52 HOURS, DELUXE CAB, 2 SPEED, LIKE NEW MACHINE, 96” MULCH & SNOW BUCKET................................................................................SOLD $44,995 2010 NEW HOLLAND L190, SN: 3388 24 HOURS, DELUXE CAB, 2 SPEED, LIKE NEW MACHINE, 96” MULCH & SNOW BUCKET................................................................................SOLD $35,500 2010 NEW HOLLAND L190, SN:3398, 66 HOURS, DELUXE CAB, 2 SPEED, LIKE NEW MACHINE, 96” MULCH & SNOW BUCKET ..........................................................................................$35,500 2010 NEW HOLLAND L190, SN:3404, 47 HOURS, DELUXE CAB, 2 SPEED, LIKE NEW MACHINE, 96” MULCH & SNOW BUCKET................................................................................SOLD $36,995 2005 NEW HOLLAND LS185.B, SN: 8669, 1194 HOURS, HAND CONTROLS, CAB ........................ ..........................................................................................................................SOLD $19,995 2006 NEW HOLLAND L185, SN: 5839, CAB WITH HEAT/AC, 312 HOURS, 78” LOW PROFILE BUCKET..........................................................................................................................$29,995 2007 NEW HOLLAND L175, SN:3424, 158 HOURS, CAB WITH HEAT, NEW TIRES ........$32,995 2008 NEW HOLLAND L175, SN: 4511, CAB WITH HEAT, HI FLOW, 171 HOURS............$33,995 2004 NEW HOLLAND LS170, 2500 HOURS, SPARE TIRE AND WHEEL ..........................$16,000

WHEEL LOADERS 2003 NEW HOLLAND LW90, 1140 HOURS, CAB WITH A/C, 1.7 YD BUCKET................$46,995 2008 NEW HOLLAND W130, FULL CAB, 343 HOURS, LIKE NEW MACHINE, CLEAN ......$96,995 2009 NEW HOLLAND W110, FULL CAB, 150 HOURS, 2.25CU YD. BUCKET, LIKE NEW MACHINE .... ....................................................................................................................................$89,995 2002 NEW HOLLAND LW80B, 1984 HOURS, HYD. COUPLER, NEW TIRES, 2 BUCKETS $49,995 2004 NEW HOLLAND LW170B, 3199 HOURS, JRB COUPLER ....................................$84,995 2006 NEW HOLLAND LW170B, 1134 HOURS, JRB COUPLER, JRB 3.0YD BUCKET ......$89,995 DOZERS 2005 NEW HOLLAND DC85 DOZER, 9’ BLADE, CAB WITH A/C, 358 HOURS..............$65,995 EXCAVATORS 2004 NEW HOLLAND EH160 EXCAVATOR, CAB WITH HEAT, MANUAL THUMB ..........$79,995 1998 KOMATSU PC150 LC-6 EXCAVATOR, GEITH MECHANICAL THUMB, JRB COUPLER, 36” OEM BUCKET, 3100 HOURS ............................................................................................$37,995 TLB’s 2008 NEW HOLLAND B95, SN7812, PILOT CONTROLS, CAB WITH HEAT/AC, 361 HOURS .............. ....................................................................................................................................$57,995 2006 NEW HOLLAND LB90, SN:4612, 551 HOURS, PILOT CONTROLS, 1000LB HAMMER, FULL CAB ..............................................................................................................................$59,995 2006 NEW HOLLAND B110, TOOL CARRIER, PILOT CONTROLS, FULL CAB, QUICK COUPLER ............ ....................................................................................................................................$69,995 1998 NEW HOLLAND 555E, COLD START, CAB WITH HEAT, 4277 HOURS, WELL KEPT MACHINE ...... ....................................................................................................................................$24,995 1985 FORD 655A, EXTRA 12” BUCKET, FRONT TIRE AND BACKHOE PADS, 2640 HRS SOLD $9,995

See dealer for financing details. CNH Capital America LLC standard terms and conditions apply. Subject to customer credit qualifications. CNH Capital America LLC reserves the right to cancel any program without notice.

VISIT OUR WEB SITE

2007 New Holland L175, SN: 3424, 158 Hours, Cab With Heat, New Tires....................................$32,995

2010 New Holland L185, SN: 5906, Pilot Controls, Deluxe Cab, 10 Hrs, 96” Mulch & Snow Bkt ........$35,500

2010 New Holland L190, SN: 3388, 24 Hrs, Deluxe Cab, 2 Spd, Like New Machine, 96” Mulch & Snow Bkt ..............$42,995

AT WWW.WTRACTOR.COM

2007 Komatsu CD60R-1

Approximately 900 Hrs, Like New, $119,500

PLEASE CALL DOUG MEHNER OR DAVID MEHRTENS (913) 371-3822

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 23

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees WHEEL LOADERS

OFF ROAD HAULERS

Komatsu WA180-1, 1996, EROPS, Quick Coupler, Exc. Condition . . . . . . . . . . . . . . . . . . . . . . . . .$46,500 Komatsu WA250-3PT, 1999, EROPS w/AC, JRB coupler, bucket, forks 20.5x25, good cond. . . . .$63,500 Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . .$100,000 Cat 936E, 1989, EROPS, 2.75 cy GP bkt, clean . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59,000 New Holland LS170 Skid Steer, 2004, 300 hrs . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,000 John Deere 624G, 1996, EROPS, quick coupler, GP bkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$66,000

Komatsu CD60R-1 Crawler Dump Truck, 1997, 360° rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66,000 Terex TA40, 2000, 6WD, 6x6, 40 ton Detroit 60 Series, Clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$142,500 Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready . . . . . . . . . . . . . . . . . . . .$127,500 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday . . . . . . . . . . . . . . . . . . . . . . .$145,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt .$115,000 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition . . . . . . . . . . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites . . . . . .$87,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites $89,000 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500

COMPACTORS IR DD22, 1993, 39" double steel, vibratory, Deutz dsl, water spray, v. good . . . . . . . . . . . . . . . . . . . .$18,500 IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 IR SD70D, 2000, Pro-Pac, 66" smooth drum, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000 Cat 825B, 1975, cab, S-blade, 50% front, 20% rear tires, good runner, can go to work . . . . . . . . .$52,500 Cat 825C, 1988, EROPS, S-blade w/tilt, rear 80%, front 60%, good condition . . . . . . . . . . . . . . . . .CALL Galion S4-6B, Deutz dsl, hydrostatic, 42” drums, transport wheels, water spray . . . . . . . . . . . . .$4,800 Hypac C747B, 2001, articulated, vibratory, 47” drums, water spray, Deutz 2 cyl, 5500#, good condition . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500 Hypac C850B, 1999, ROPS w/cab, 84” smooth drum, drive, Cummins, 18-26 tires . . . . . . . . . . . . . .$47,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500 (2) Champion Superpac A421 . . . . . . . . . .$11,500

CRAWLER TRACTORS Cat D4H Series II, 1990, OROPS, 6 way blades, 18" pads, draw bar, 100% Cat U/C . . . . . . . . . . .$57,000 Cat D6H, 1988, OROPS, S-blade w/tilt . . . .$76,000 Cat D6H LGP Series II, 1993, EROPS, diff steer, drawbar, 30" pads, fresh undercarriage . . . .$89,000 Cat D6H, 1987, Semi U blade w/tilt, ROPS, fair U/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,000 (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea Komatsu D37P-5, 1997, 24" Pads, OROPS, P/S . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36,500 LANDSCAPING

Case 480 Broom Tractor, frt mounted 6' sweepster broom, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . .$13,000 Case/IH 485 Utility Tractor,1986, Case 3 cyl dsl engine, 55 gal water tank . . . . . . . . . . . . . . . . . . . . . . . . .$10,500 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" hydraulic broom . . . . . . . . . . . . . . . . . . . . . . . . . .$11,500 Taylor-Way 12' Transport Disc, 24" discs, (4) tires, hyd lift, exc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd CRAWLER LOADERS Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt . . . . .. angle tongue, scrapers, 2” axles . . . . . . . . . . . . .$9,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37,500 AIR COMPRESSORS Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000 IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . . . .CALL

SPECIALS TRUCKS & TRAILERS Vermeer 5800 Trencher, 1997, 4 cyl dsl eng .$17,500 (2) 48' Box Vans w/Liftgates, Good Condition . . . . .. (12) IR L6-4MH Light Plants, 1992-1995, all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL IAmerican Augers 16" Boring Machine, 10 HP gas, CRUSHING & CONVEYING 35,000# thrust, 30' track . . . . . . . . . . . . . . . . . . . .$7,500 Power Screen, Mark II, 1987, Port. Screening Plant, BACKHOES Double Deck, 24'x40' . . . . . . . . . . . . . . . . . . .$36,000 Cat 416C IT, 2000, 4x4, OROPS, Quick Coupler, GP Viper 301 Portable Screening Plant, 1997, dsl, 5'x7'. Bkt, Extendahoe . . . . . . . . . . . . . . . . . . . . . . . . .$36,000 Case 580L Rubber Tire Loader Backhoe, 1997, side & rear conveyors, T/A carrier . . . . . . . . . . .CALL OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . . .$24,500 DRILLS Volvo BL70, 2003, 4x4, Extend-A-Hoe, EROPS, 24" Bkt, Like New . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59,500 John Henry Drill Mtd on Cat 320N, 1994, 24' mast, Duraquip dust collection . . . . . . . . . . . . . . . .$150,000 MOTOR SCRAPERS Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good John Henry Drill Mtd on Cat 320L, 1994, 24' drill, condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL carousel, dust collector . . . . . . . . . . . . . . . .$162,500 Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL CRANES HYDRAULIC EXCAVATORS JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick coupler, 6-7000 hrs, Fleet maintained . . . . . . . . .$39,000 Hitachi UH181, 1985, Equipped w/hammer . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$72,000 Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber, operational . . . . . . . . . . . . . .$10,500/OFFER Cat 215BLC, 1985, 7'3" stick, 28" TBG pads, 10 roller U/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $31,500 Cat 313B-CR, 2001, zero tailswing, A/C & AM/FM, JRB quick coupler . . . . . . . . . . . . . . . . . . . . .$93,000 Kobelco SK200LC Extra Long Reach, 1993, 32" TBG pads, 42' reach, nice . . . . . . . . . . . . . . .$68,500 Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6" TBG pads, work ready . . . . . . . . . . . . .$57,000 (5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . .CALL Komatsu PC750 LC-6, 1999, 454 hp, 27” boom, 11’10” stick, 44’ DGB, aux plumbing, bucket choice, 24k ctwt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$255,000 Komatsu PC400 LC-6LK, 1999, 10’6” stick, JRB coupler, 31.5” TBG, ctwt removal, choice of bkt .$77,500 Komatsu PC400 LC-6LK, 11’1” stick, 35.5” TBG, ctwt removal, choice of bkts, working everyday . .$97,500 Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB coupler, plumbed, 8’6” width, nice, work ready CALL Volvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing very good condition . . . . . . . . . . . . . . . .$205,000

Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 Drott 3330B Carry Deck, 7.5 ton capacity, dsl, 4 section boom 8' jib . . . . . . . . . . . . . . . . . . . . . . . .$14,500 Shuttlelift Model 3330 ELB Hyd. Carry Deck Crane, duel fuel, elec. winch w/remote control, exc. Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32,500

MISCELLANEOUS (2) Balderson Broom Attachment for Cat IT Machines, 8' wide, good condition . . . . . .$4,000 ea.

ATTACHMENTS BUCKETS PC1000, 84" Digging Bucket . . . . . . . . . . . .$9,500 Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 (5) Cat 936/926/950 pallet forks, for a Balderson quick coupler, exc. cond. . . . . . . . . . . . . . . . . . . .$3,500 Ea Others Available Call Prices Are Negotiable - At Your Inspection All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.

Page 24 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Foley Rents to Carry Atlas ‘Friend, Businessman and Copco Compressors, Tools Mentor’ Michael Sill, Dies Effective immediately, Foley Rents, Foley Incorporated’s CAT Rental Store, has joined Atlas Copco’s extensive network of construction equipment dealers. Headquartered in Piscataway, N.J., Foley Rents will be the exclusive dealer for Atlas Copco’s line of compressors, featuring Cat engines, in the 185 to 375 range. According to Ed Gudaitis, general manager, Foley Rents, “We Foley Rents will be the exclusive dealer for Atlas Copco’s decided to carry Atlas line of compressors, featuring Cat engines, in the 185 to Copco’s line of air com- 375 range. pressors because, like Cat, they are a global leader and understand our marketplace better than service training with Foley employees to anyone. The Atlas Copco line is a wonderful review Atlas Copco’s lines of compressors complement to our current product line. It is and handheld tools. “Atlas Copco has the option to integrate a very well known name and its reputation is Cat engines into their air compressor units, positive and strong.” Atlas Copco’s products and services range which enables our customers to receive the from compressed air and gas equipment, benefits of Cat’s world class parts and servgenerators, construction and mining equip- ice support. This helps live up to our vision ment, industrial tools and assembly systems as being the unbeatable business partner to to related aftermarket and rental. While all of our customers,” Foley pointed out. “We are very pleased to welcome Foley the company’s larger air compressor units feature Cat engines, only Caterpillar dealers into the Atlas Copco family. We feel that will be able to obtain the smaller sizes fea- their reputation and professionalism are second to none, and we believe that, together, turing Cat engines. “Foley brings ‘our people’ to the table in we can achieve long term success in the this endeavor,” said Ryan Foley, vice presi- area,” said Rozar. “Our customers are pleased to see we dent of Foley Rents. “They are our most prized asset in this business. We invest a sig- have chosen to add Atlas Copco to our allied nificant amount of resources to the develop- brands at Foley Rents,” said Foley. “Our goal over the next one to three years is to ment of our people at Foley.” Foley Rents services all of the equipment increase our presence in the air compressor it carries. Todd Rozar, business development marketplace and provide the best products manager, Atlas Copco Construction with the best service to all of our customers Equipment, will be conducting sales and in Foley Inc.’s territory.”

Dewey Cardoso.

Patrick Brosnan.

Peter Reis.

SILL from page 1

and expanded that operation in 1979 when it became the Midwest distributor of Telelect Products and other lines of truck mounted equipment in the Dakotas, Minnesota and Iowa. By 1980, Road Machinery took on representation of Komatsu dozers and by 1985 had added the Komatsu wheel loader and excavator product lines. Komatsu is the second largest manufacturer of construction equipment in the world. In 1986, RMS started Aspen Equipment Co., following its acquisition of Airpower Equipment Corp. Aspen's focus was on general equipment such as air compressors, light towers, chippers, and truck cranes. In 1994 Mr. Sill and his identical twin brother Mitchell split the business for growth purposes while Mitch and his family took ownership of Aspen Equipment and the former Truck Equipment Division (renamed Reach Equipment), and Mike and his family retained RMS and its heavy construction, forestry, and mining products. Mr. Sill served as AED president in 1985. He also served as a board member of Habitat for Humanity of Collier County and the Associated General Contractors of Minn. Mr. Sill was a member of the Young Presidents Organization and served Michael Sill Sr. as chapter chairman and on the national board of directors. He was a member of the Chief Executive Organization and World Presidents Organization which offered him the opportunity to travel, meet and learn from many world leaders. In 1976, Mr. Sill was with the first U.S. delegation of businessmen, sanctioned by the State Department, for a trade mission trip to Cuba where they met with Fidel Castro.

He served on a number of company boards, including First Bank of Minneapolis, The Franklin National Bank, Venturian, Vaughns, and Polaris Industries. Mr. Sill touched many lives as a friend, businessman, and mentor. He had an uncanny memory for names and faces and he was truly interested in everyone he ever met. He

was a member of Wayzata Country Club, the Royal Ponciana Country Club and Port Royal Club of Naples, Fla. Mr. Sill is survived by his wife of 51 years, Barbara; daughters Debra Williams (Hunt III) and Patricia Sill; sons Michael and Douglas and six grandchildren. His son Michael Sill II, is the third generation president and CEO of RMS.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 25

Page 26 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contact: Tel: Fax: Email:

Walt Kay 540/309-1709 540/389-6507 walter.kay@RSCrental.com

RSC Equipment Rental SCISSORS

C O M PA C T I O N

2004 GENIE GS1930, SCISSOR LIFT-15-19' DC, S/N GS300464946, UNIT #506376........................................$3,535 2005 JLG 2032E2, SCISSOR LIFT-20' DC-30-34", S/N 0200138716, UNIT #580396 ..........................................$5,294 2005 GENIE GS2032, SCISSOR LIFT-20' DC-30-34", S/N GS320576098, UNIT #581686 ................................$5,367 2004 SKYJACK SJIII-3226, SCISSOR LIFT-26' DC-30-32", S/N 272214, UNIT #515905 ..................................................$5,782 2005 GENIE GS2646, SCISSOR LIFT-25-26' DC-46-68", S/N GS460563998, UNIT #564334........................................$6,051 2005 SKYJACK SJIII-4632, SCISSOR LIFT-30-34' DC-46-69", S/N 711485, UNIT #541377............................................$9,295

2005 MULTIQUIP MRH800GS, ROLLER-SMOOTH-DD-1500# 26”, S/N N4034, UNIT #588093......................................$6.490 2005 WACKER RT82-SC, W/B ROLLER-PADFOOT-3000#, S/N 5549433, UNIT #548636..................................................$6,932 2005 WACKER RT820, W/B ROLLER-PADFOOT-3000#, S/N 5599982, UNIT #585071 ................................................$7,967 2005 WACKER RT56-SC, W/B ROLLER-PADFOOT-3000#, S/N 5569442, UNIT #565640 ................................................$8,091 2005 IR SD45D-COMBO, R/O ROLLER-VIB-SD 5T 54”, S/N 182289, UNIT #555319 ................................................$22,844

BOOM LIFTS 1999 GENIE Z45/25-DF-4WD, ART BOOM LIFT-45-49'-4WD, S/N Z452511256, UNIT #286953..................................$15,804 1998 JLG 601S-D-4WD, STR BOOM LIFT-60-64'-4WD, S/N 0300037612, UNIT#248700..........................................$16,896 2004 JLG E300AJP-NAR, ART BOOM LIFT-30-34'-2WD DC, S/N 0300079224, UNIT #517940 ........................................$17,525 2002 TEREX TB85-D-4WD, STR BOOM LIFT-85-89'-4WD, S/N 2660012, UNIT #7602108 ............................................$24,199 2005 JLG E400AN-NAR, ART BOOM LIFT-40-44'-2WD DC, S/N 0300081644, UNIT #541391 ........................................$24,530 2002 GENIE S85-DF-4WD, STR BOOM LIFT-85-89'-4WD, S/N S853354, UNIT #439174 ..............................................$35,696

G E N E R AT O R S 2005 MULTIQUIP DCA10SPX3, GENERATOR-10-14 KW, S/N 3763449, UNIT #584432 ................................................$5,448 2004 MULTIQUIP DCA45USIC, GENERATOR-30-39 KW, S/N 8200424, UNIT #529066 ................................................$8,816

FORKLIFTS 2005 DAEWOO G25E, IND FORKLIFT-5000 LB, S/N GA00539, UNIT #563670 ..............................................................$10,696 2004 DAEWOO D35S, IND FORKLIFT-8000-9000 LB, S/N FZ00026, UNIT #513074 ..............................................$16,056 2004 GEHL RS5, RCH FORKLIFT-6000 LB 20-34', S/N RS5JV1211568, UNIT #539392....................................$20,259 2003 JLG G9-43A, RCH FORKLIFT-9,000 LB 35-45', S/N 0160002173, UNIT #473963..................................$21,135 2004 GEHL RS6, RCH FORKLIFT-6000 LB 35-39',S/N RS6JV0213064, UNIT #489226....................................$23,249 2004 LULL 644E-42, RCH FORKLIFT-6000 LB 40-45', S/N 0160003168, UNIT #484162 ........................................$29,114 2004 GRADALL 534D9-45, RCH FORKLIFT-9000 LB 35-45', S/N 0160003937, UNIT #499455 ........................................$31,734 2005 GEHL DL8L-42-CAB-HTR, RCH FORKLIFT-8000 LB 3545', S/N 8L42JW0135516, UNIT# 541583 ..................$37,394 2004 SKYTRAK 10054, RCH FORKLIFT-10000 LB 40-55, S/N 0160004344, UNIT #508084 ........................................$39,682

540/309-1709

2005 BOBCAT S220, SKIDSTEER LOADER-1851-2200 LB, S/N 526215460, UNIT #590851 ........ ...................................... $17,325

2004 DEERE 550H-LT CRAWLER DOZER, 75-84HP-STD TRACK, S/N T0550HX937358, UNIT #512419 ........................$31,747

2005 WACKER RT82-SC, W/B ROLLER-PADFOOT-3000, S/N 5593138, UNIT #581593............ ........................................$6,932

2004 DEERE 310G D/L-CABBACKHOE-4WD 18-20’ EXT/CAB, S/N T0310GX941817, UNIT #531900........................$34,883

2004 JLG G9-43A, RCH FORKLIFT-9000 LB 35-45', S/N 0160003850, UNIT #505796 ...... ......................................$29,561

Get the latest news online.

Visit CEG’s Web Site at

for a

Tough Job

www.construction equipmentguide.com

C Series

B Series

• 95 - 110 hp • 12169-15212 Breakout Force • 7.5 Bucket Cap.

• 60 - 80 hp • 4312 - 7670 Breakout Force • 2200 - 2900 Load lbs.

“ Like Being Next Door ”

www.messicks.com

800-222-3373 187 Merts Drive 7481 Lincoln Highway East

(Rte. 283 Rheems Exit)

Elizabethtown, PA 17022

(Rte. 30)

Abbottstown, PA 17301

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 27

TO VIEW OUR ENTIRE INVENTORY VISIT www.equipmentmartofny.com 2004 Cat 321C LCR Hydraulic Excavator

2001 Manitowoc 2892C 28 Ton Tr. Mtd. Crane 92’ Boom + 44’ Jib Mtd. on 2001 Ford Sterling LT7500 Truck, Cat Dsl, 9-Spd, Trans., Front Stabilizer $85,000

9'6" stick, 32" tracks, aux. hyd, Cat hyd. coupler, A.C. Approx. 2600 Hrs $98,500

2001 Cat 320CL Hydraulic Excavator

(2) 1995 Cat D300D 30 Ton Articulated End Dumps

Auxiliary Hydraulics, Quick Coupler $65,000

(2) 2003 Cat M318C Wheeled Excavators

23x25 Tires, Approx. 8500 Hrs $36,000 Ea.

2003 Cat 330CL Hydraulic Excavator

12’10” Stick, 34” Tracks, Hyd. Q/C, 6700 Hrs $79,500

aux. hyd., VA boom, A/C, $65,000 EA.

2001 Cat 322CL Hydraulic Excavator, 9’8” Stick, 32” Tracks, Aux. Hyd., Quick Coupler, Approx. 7300 Hrs, $68,500 • 1981 Link-Belt HSP8018 18 Ton Rough Terrain Crane, 70’ Boom + 20’ Jib, One Hoist, Cleaned & Painted, $29,500

203/335-0100

EQUIPMENT WANTED Fax: 203/335-7996

Answering Machine 24 Hours E-mail us at equipmart@aol.com

Page 28 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bridge Work Unaffected by Delayed Spending Agreement TRAFFIC from page 1

State have been delayed due to the ongoing budget stalemate, this project has not been affected. New York’s fiscal year began on April 1, but Gov. David A. Paterson and legislators have been unable to come to an agreement or compromise on the 2010 to 2011 spending plan. According to the New York State Department of Transportation (NYSDOT), this job is proceeding without interruption or decrease in work force. Acting Commissioner Stan Gee of NYSDOT broke ground on June 30, 2009, for the $27.9 million project, which will be paid for by a combination of state and federal funds. In his remarks at the ceremony, Marc Herbst, executive director of the Long Contractors Posillico Civil Inc. began work on the Route 110 proj- Island Association (LICA), said ect on May 5, 2009, and is on schedule for its estimatthat “Over seventy years ago ed time of completion of Nov. 29, 2011. it was demonstrated clearly and conclusively that spending public money on infrastructure projects would through Huntington’s major business district will enjoy a faster and safer journey after the completion of a project to reconstruct two NY Route 110 bridges over the Long Island Expressway, thereby improving traffic flow along this vital stretch of the Route 110 corridor. While many projects across New York

Ground was broken on June 30, 2009, for the $27.9 million project, which will be paid for by a combination of state and federal funds.

reinvigorate an economy, put people back to work and forge a strong and dynamic society. In the teeth of a grinding recession we are learning that lesson once more.” Reconstruction of the bridges over the expressway will improve vertical clearance for higher profile vehicles. In addition, Huntington’s South Service Road will be widened to provide three travel lanes and shoulders for each direction, its intersections improved, expressway exit and entrance

ramps reconfigured, new asphalt laid, drainage systems modified, signals updated, and new pavement markings and signage carried out. NYSDOT studies show the interchange at this point is used by approximately 88,000 motorists each day. Prime contractor for the project is Posillico Civil Inc., of Farmingdale, N.Y. Incorporated in 1946 as a small trucking contractor under the presidency of Joseph D. Posillico Sr., it is now a third-generation business carrying out large and highly complex civil engineering and construction projects. The company With 40 employees on site, Posillico Civil Inc.is fielding a large fleet of equipemploys approximately 400 ment, which includes: people. • Caterpillar 322 and 345 excavators; Posillico Civil Inc. began • Caterpillar 938G payloader; work on the Route 110 proj• Caterpillar D4G dozer; ect on May 5, 2009, and is • Caterpillar 420 backhoe; on schedule for its estimated • Caterpillar AP655C asphalt paver and CS563 roller; time of completion of Nov. 29, 2011. • Grove RT635C picker; By early September 2009 • Ingersoll Rand DD-90HF and DD-138A rollers; the project was approximate• Link-Belt HC 258 200-ton (181 t) crane; and ly 20 percent accomplished, • Komatsu PC308 excavator. with utility work completed Posillico has tapped several subcontractors to work on the job, including: and roadway and bridge • Johnson Electrical Construction Corporation, Hauppauge, N.Y., is carrying out work in their initial phase. the electrical work; “We are currently driving • NE Structural Steel Inc., Mount Vernon, N.Y., is handling bridge jacking and permanent and temporary structural steel; steel sheeting and installing • The NUCO Painting Corporation, Islandia, N.Y., is responsible for removing new drainage structures and lead paint and carrying out new painting; piping,” Posillico Area Manager Michael Perciballi • Island Pavement Cutting Company Inc., West Babylon, N.Y., is Posillico’s saw said. “Roadway widening cutting and pavement sealing subcontractor; and forming and paving of • Safety Marking Inc., Bridgeport, Conn., is providing temporary and permanew bridge footings, nent pavement markings; pedestals, and retaining • Ponderosa Fence Enterprises Inc., Hicksville, N.Y., is responsible for cantilever walls are also under way.” sign structures and installing chain link fence, bridge rail, guide rail and signs; “No major problems have • Landscaping is by Gayle Bard Landscapes Inc., Dix Hills, N.Y.; been experienced,” • And concrete curb and sidewalk work will be carried out by the Island Perciballi said. “There were Concrete Construction Corporation of Centereach, N.Y.

Iron and Subs

Reconstruction of the bridges over the expressway will improve vertical clearance for higher profile vehicles.

Huntington’s South Service Road will be widened to provide three travel lanes and shoulders for each direction and its intersections will be improved.

see TRAFFIC page 116

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 29

Contact Dan 1-978-479-5192 15 Katrina Road • Chelmsford, MA 01824

www.cbused.com

KOLBERG STACKING CONVEYOR MD#2-3050, #7503 ........................................................................$16,500

2003 VOLVO EC330BLC, #7544 ......................$69,500

2003 VOLVO EC210BLC, #7359 ......................$52,500

2002 VOLVO A30D, #7388, CLEAN ..............$114,500

1987 KOMATSU PC150, #7531, RUNS GREAT.............. ........................................................................$15,000

1998 CAT 938G, #7536, WITH SPARE TIRE....$45,000

2005 KAWASAKI 65TM, #7529, COUPLER, BUCKET, FORKS, THIRD FUNCTION ..............................$59,000

2002 CAT M320MH, #7534, WITH GRAPPLE , RUNS GREAT..............................................................$89,000

2005 DAEWOO/DOOSAN 175LCV, #7506, ONLY 1350 HRS, VERY CLEAN ..........................................$57,500

CEC 5X12 SCREENING PLANT, #CE184, 900 HRS, CLEAN............................................................$139,500

FUCHS MHL320D, #FC126, O HOURS .......................... ........................CALL FOR BLOW OUT PRICING $$$$

NEW CEC 6X16, #CE187, NEVER BEEN USED .............. ......................................................................$199,500

Page 30 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 31

YOUR EAST COAST RENTAL SOURCE

342 Rockingham Rd Londonderry, NH

603-623-3669

MACHINES AVAILABLE FOR EXPORT CONTACT: RANDALL SANDERSON

603-623-3669 OR 603-234-0353 Email: rsanderson@tquip.com

2006 KOMATSU WA380-5 EROPS, A/C, 23.5X25 RADIAL RUBBER, 4CY G.P. BUCKET............ ........................................$119,000

EXCAVATORS

WHEEL LOADERS 07 CAT IT38G, EROPS, A/C, 80% GOOD YEAR 23.5 RADIALS, Q/C, 3.5CY G.P. BKT .... ............................................................................................................................$95,000 07 KOMATSU WA320-5L, EROPS, A/C, 20.5 X 25 RADIALS, 3.5CY BUCKET, Q/A W/ FORKS ..............................................................................................................$105,000 (2) 07 KOMATSU WA250-5L, EROPS, A/C, 20.5X25 MICHELIN RADIALS, 3CY G.P. BKT W/ TEETH, Q/A, FORKS, TOOL CARRIER ........................Starting at $79,000 Each 07 KAWASAKI 70ZV-2, EROPS, A/C, 23.5 RADIALS, JRB Q/A, FORKS AVAILABLE ........ ..........................................................................................................................$109,000 06 CAT 930G, EROPS, A/C, 20.5 X 25 MICHELIN RADIALS, 3CY BKT W/EDGE, Q/A, FORKS AVAIL ......................................................................................................$89,000 05 KOMATSU WA380-5, EROPS, A/C, 23.5 X 25 RADIALS, 4.5 CY BKT W/ EDGE, ADDITIONAL CTRWT ..........................................................................................$99,000 05 NEW HOLLAND LW270, EROPS, A/C, 26.5 RADIALS, CUMMINS ENGINE, 5CY GP BUCKET (complete recon) ..................................................................................$69,000 05 KOMATSU WA320-5L, EROPS, A/C, 20.5 X 25 RADIALS, 3.5 CY BKT, Q/A W/HYD FORKS ................................................................................................................$79,000 05 KOMATSU WA250-5, EROPS, A/C , 20.5 X R25 MICHELIN XHA RUBBER, 3 CY GP BKT, JRB Q/A ......................................................................................................$69,000 00 CAT 924G, EROPS, A/C, 20.5 X 25 RUBBER, 2.75CY G.P. BKT, POWERSHIFT .......... ............................................................................................................................$54,500

LOADER BACKHOES

DOZERS

CAB, A/C, BLADE, STEEL PADS, 24" BUCKET, HYD.THUMB & TILT BUCKET - ALL OPTIONS! ..$59,000

07 KOMATSU D39EX-21A, EROPS, A/C, 20” PADS, 6-WAY BLADE ..................$69,000 06 KOMATSU D155AX-5, EROPS, A/C, ST BLADE, 60% UC ............................$229,000 (2) 06 KOMATSU D65EX-15, CAB, A/C, 24” PADS, SU BLADE W/ TILT, 65% UC, 2500+/- HRS ..........................................................................Starting at $129,000 Each (2) 06 CAT D3G LGP, OROPS, 28” LGP PADS, 6-WAY BLADE, RENTAL FLEET RETURN, JOB READY ..............................................................Starting at $29,500 Each 05 CAT D6N LGP, EROPS, A/C, 32” PADS, DIFF STEERING, DRAW BAR, 70% UC, ONE OWNER SINCE NEW ..........................................................................................$99,000 03 CAT D5GXL, EROPS, A/C, 20” PADS, 80% UC, PAT BLADE, WORKING DAILY .......... ............................................................................................................................$39,000 01 JOHN DEERE 650H, OROPS, 28” LGP PADS, 6-WAY BLADE ........................$29,000 86 CAT D4H II, OROPS, 18” PADS, ST BLADE ..................................................$19,000

LIFTS/TELEHANDLERS 03 LULL 1044C-54, 4X4, DIESEL, OROPS, 10,000LB LIFT CAPACITY, 54FT REACH ...... ............................................................................................................................$45,000 02 LULL 1044C-54, OROPS, 4X4, CUMMINS DIESEL, 10,000LB LIFT CAPACITY, LOC FLA ......................................................................................................................$32,500 98 SKYTRAK 8042, OROPS, 4X4, DIESEL, 8,000LB CAPACITY, 42FT REACH HEIGHT, LOW HOURS, LOC IN FLA ..................................................................................$26,500 JLG 800A 4X4 FORK LIFT, DUAL FUEL, 80 FT REACH, 500LB LIFT CAPACITY, ARTICULATING BOOM ....................................................................................................$19,000 TEREX SS644C, OROPS, 4X4 JOHN DEERE DIESEL, 6,000LB LIFT CAPACITY, 44FT REACH, LOC IN FLA ............................................................................................$19,000

ROLLERS

2006 KOMATSU PC300 LC-7 A/C, 32" PADS, STD STICK, 48" BUCKET, HYD THUMB ....$139,000

(3) 2005 CASE CX210’s A/C, 9/10” STICK, 32” PADS .......... ..............Starting at $75,000 Each

Southern NH, Northern MA 603-396-5144

John Colcord

06 KOMATSU PC300LC-7, A/C, 32” PADS, STD STICK, 48” BUCKET, HYD THUMB ...... ..........................................................................................................................$149,000 06 CAT 315CL, 28” PADS, 10’2” STICK, 36” BUCKET, MECHANICAL THUMB ..$99,000 06 KOMATSU PC160LC-7, A/C, STD STICK, 24” PADS, 36” GEITH BKT ROCKLAND WIDE THUMB......................................................................................................$89,000 06 KOMATSU PC138USLC-2, A/C, STD STICK, 24” PADS, 36” GEITH BKT ROCKLAND WIDE HYD THUMB..............................................................................................$79,000 06 KOMATSU PC78US-6, CAB, A/C, BLADE, STEEL PADS, 24” BUCKET, HYD.THUMB & TILT BUCKET - ALL OPTIONS! ........................................................................$59,000 06 KOMATSU PC50MR2, CAB, A/C, BLADE, OFFSET BOOM, RUBBER PADS, AUX HYDRULICS, WB 24” DIGGING BKT, GEITH 42” TWIST-WRIST ........................$69,000 (2) 05 CAT 330CL, A/C, STD STICK, 32” PADS, CAT 48” BKT, EXCELLENT CONDITION ..............................................................................................Starting at $139,000 Each (2) 05 KOMATSU PC220LC-7, A/C, STANDARD STICK, 42” HENSLEY BKT, 60” TILT BUCKET....................................................................................Starting at $99,000 Each 05 KOMATSU PC160LC-7, A/C, STD STICK, HYD THUMB & 36” HENSLEY BKT .......... ............................................................................................................................$89,000 (2) 05 KOMATSU PC120LC-6, JRB COUPLER, JRB 48” TILT BUCKET, GEITH 36” DIGGING BUCKET ..........................................................................Starting at $79,000 Each 04 KOMATSU PC138USLC-2, CAB, A/C, BLADE, Wain Roy Q/A W/2 BUCKETS: 48” Tilt 36” DIGGING BKT ..............................................................................................$69,000 05 CAT 420D-IT, EROPS, 4X4, PLUMBED, E-HOE W/ 12” Q/A BKT W/ TEETH, 7’8” Q/A B.O.C.E. BKT........................................................................................................$53,900 05 CAT 420D-IT, EROPS, A/C, 4X4, 3RD VALVE, EXTENDAHOE, GP FRONT BKT, REAR DIGGING BUCKET ..............................................................................................$52,500 05 KOMATSU WB140PS-2N, CAB, A/C, E-STICK, 24” REAR BKT ......................$49,000 05 KOMATSU WB140-2N, CAB, A/C, E-STICK, 24” REAR BKT ..........................$49,000

2006 KOMATSU PC78US-6

Rhode Island & Southern MA 401-255-9340

Denny Easton

08 SAKAI SV505, 84” VIBRATORY ROLLER, OROPS, DRUM DRIVE, NEAR NEW .......... ............................................................................................................................$59,000 (2) 06 SAKAI SV400T, OROPS, 66” FACTORY SMOOTH DRUM SHELL WITH PAD DRUM, ONLY 500+/- HRS........................................................Starting at $49,000 Each (4) 06 DYNAPAC CA250D, 84” VIBRATORY ROLLER, OROPS, DRUM DRIVE ................ ................................................................................................Starting at $59,000 Each 05 DYNAPAC CA150D, 66” VIBRATORY ROLLER, OROPS, SMOOTH DRUM, W/PADFOOT KIT ............................................................................................................$49,000 05 IR SD45D, OROPS, 54” VIBRATORY ROLLER, SMOOTH DRUM, DRUM DRIVE, LOC IN FLA ................................................................................................................$24,500 04 IR SD45D, 54” VIBRATORY ROLLER, DRUM DRIVE, OROPS, PADFOOT KIT ............ ............................................................................................................................$27,500

2005 CAT 321C LCR A/C, STD STICK, 32" PADS, ZERO TAILSWING, MANUAL THUMB, 42" CAT BKT, HYD PLUMBING..$109,000

SKID STEERS 07 KOMATSU CK30-1, OROPS, RUBBER TRACKS, Q/A BUCKET ......................$25,000 06 CAT 226B, OROPS, 68” G.P. BUCKET, 10X16.5 RUBBER ..............................$16,900 06 CAT 242B, OROPS CAB, AUX. HYD. PLUMBING, VTS TRACK SYSTEM, 12” TRACKS, MANUAL COUPLER ............................................................................$26,000 06 KOMATSU SK1020-5N, ENCLOSED CAB W/HEAT, CTRWT, CTRL CHANGE ..$29,000 04 BOBCAT T250, EROPS, A/C, TRACK MACHINE..............................................$25,000

CRUSHERS 04 NORDBERG HP300, CONE CRUSHER 02 KOMATSU BR550JG-1, 44X30 TRUCK MOUNTED JAW CRUSHER, MAG SEPARATOR, MUCK CONVEYOR ASSY, RADIO REMOTE CONTROL, 300+ HP, COMPLETE UPDATES BY DLR, 60K IN RECENT REPAIRS ..................................................$229,000 00 NORDBERG NW3055VFR, 30X55 JAW CRUSHER, 2 AXLE CARRIER, 26” X 18” HOPPER, MAGNET, VERY LITTLE USE, 48” DISCHARGE CONVEYOR ............$225,000 97 READ AMBASSADOR, 2 DECK SCREEN, HYD.TIPPING GRIZZLY, W/DISCHARGE BELT, LOW HOURED 1 OWNER MACHINE..........................................................$59,000 05 CEC ROADRUNNER SCREEN, SCREEN IT SERIES II SCREENING PLANT, 5’x12’ screen w/stepped top dck, 2 deck w/ 3” top deck, 48” feed conv, 42” underscreen conv, susps. brakes, trlr mtd ..............................................................................$99,000

ROCK TRUCKS (4) 07 KOMATSU HM300-2, 6X6, A/C, 23.5X25 RADIAL RUBBER, TAILGATE, BODY HEATER ..................................................................................Starting at $179,000 Each 05 CAT 725, A/C, 23.5 80% RADIALS, CLEAN & PAINTED, 1 OWNER SINCE NEW........ ............................................................................................................................$99,000 05 KOMATSU HM300-1, A/C, RETARDER, HEATED BODY, 26.5 RADIAL RUBBER ........ ..........................................................................................................................$119,000 (2) 05 CASE 325, 25 TON, 6X6, RADIAL RUBBER, RENTAL FLEET RETURN.................. ................................................................................................Starting at $79,000 Each 01 CAT 725, A/C, NEW 23.5 RADIAL RECAPS, CENTRAL LUBE ........................$69,000 01 TEREX TA35, A/C, AM/FM STERO BRIDGESTONE RADIALS, 6X6 FACTORY TAILGATES ................................................................................................................$79,000 00 CAT D250E, 6x6 23.5 RADIALS, BODY LINER, 1-OWNER TRUCK ................$49,000 (2) 97 CAT D350E, COMPLETE RECON, 80% 26.5 RADIALS, WORKING DAILY ............ ................................................................................................Starting at $69,000 Each 73 CAT 773, EROPS W/HEAT, POWER SHIFT TRANS, HEATED BODIES ............$39,000

2005 CAT 308C CR A/C, AUX.HYD.PLUMBING, 7'3" STICK, 24" PADS, 27" BUCKET, 91" BLADE, HYD.THUMB ........$59,000

WATER TRUCKS 02 CAT 725, EQUIPPED WITH NEW 5000 GAL TANK, FRONT & REAR SPRAY HEADS, PWR CANNON, SIDE SPRAY ............................................................................$149,000 99 GMC C6500, A/C, 2500 GALLON TANK, FRONT REAR & SIDE SPRAYERS, 6 SPeED TRANS ................................................................................................................$25,000 99 GMC C7500, A/C, 2500 GALLON TANK, FRONT REAR & SIDE SPRAYERS, 6 SPEED TRANS ................................................................................................................$29,000 99 FREIGHTLINER FL70, A/C, 2000 GALLON TANK, 5 SPRAYERS, 6-CYL. CUMMINS, 6 SPEED TRANS, 11R 22.5 RUBBER ..................................................................$19,000

(2) ‘00-’06 CASE 821 LOADERS

2004 CAT 730

EROPS, A/C, 23.5 RADIALS, 4.5CY BUCKET WITH ACS Q/A, FORKS AVAILABLE................ ..............................Starting at $75,000 Each

A/C, REATARDER, CAT 3196 ENGINE, 60% 23.5 X 25 RADIALS, NEW FACTORY TRANS, NEW BRAKES ..................................$119,000

(2) 2005 CAT 420D IT EROPS, A/C, 4X4, 3RD VALVE, EXTENDAHOE, GP FRONT BKT, REAR DIGGING BUCKET ................ ....................STARTING AT $52,500

1989 CAT D5H OROPS, 22" PADS, DRAW BAR,6WAY BLADE, WORKING DAILY ...... ..........................................$29,900

See Our Complete Inventory at www.tquip.com

Page 32 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cherry Valley Tractor Sales of Marlton, N.J., announced April 29 that it has taken on the full line of Kubota construction equipment.

N.J.’s Cherry Valley Tractor Takes on Full Kubota Construction Lineup

CRANE MATS NORTHEAST, LLC Hudson Falls, NY 518.792.4708 www.cranematsnortheast.com

Cherry Valley Tractor Sales of Marlton, N.J., announced Kubota certified and its parts department is fully stocked April 29 that it has taken on the full line of Kubota construc- with all common wear parts for the full line of Kubota contion equipment. The company has been a Kubota dealer for struction equipment. tractors, commercial mowers, lawn and garden, utility vehi“If you needed a Kubota part,” said Wright, “we would cles and light construction have it in inventory for you.” equipment since 1977. Cherry Valley Tractor’s “We’d been wanting this for Kubota sales territory includes a long time. I think Kubota saw the Philadelphia area in souththat we’ve been a successful eastern Pennsylvania and dealer for them for years and Camden and Burlington counthat we’d done well with the ties in New Jersey. Wes other product lines, so we were Levonian, with 25 years of able to add the construction line industry experience, will handle to our product offering,” said sales in the Pennsylvania counBrian Wright, sales representaties, while Hank Hampton, with tive of Cherry Valley Tractor 20 years of experience will hanSales. dle sales in Camden and south Cherry Valley Tractor Sales Burlington counties and Rick will now carry the KX and U Nelson, with 20 years of experiSeries of compact excavators, ence, will cover northern including the newly launched Burlington county. Bill KX057 and U55 excavators. Mathers, with 25 years of expeThese excavators range from rience, will handle municipal 2,200 lbs. (998 kg) to more than customers in Camden and 18,000 lbs. (8,165 kg) machines Burlington counties. and include both traditional tail Founded as a Ford dealership swing and zero tail swing modin November 1961 by Harold els. The company will also Wright Sr., Cherry Valley carry the R Series of compact Tractor Sales soon became a wheel loaders. light construction equipment In addition to selling new The KX057 and R420S are just two of the many dealership. Today, the third-genequipment, Cherry Valley models of Kubota equipment now available at eration family company carries, Tractor currently has approxi- Cherry Valley Tractor in Marlton, N.J. in addition to Kubota, New mately 50 machines in its rental Holland ag and industrial tracfleet, including tractors, skid tors; Bandit chippers and stump steers, full-size and compact backhoes, stump grinders, chip- grinders; Ransomes turf equipment, Alamo Industrial, pers and mini-excavators. “We’re very excited about adding Rayco and much more. several new Kubota units to the fleet so we can offer our cusFor more information, call 856/983-0111, or visit tomers the full-line of Kubota product for their rental needs”, www.cherryvalleytractor.com. said Wright. (This story also can be found on Construction Cherry Valley Tractor is poised to handle all Kubota full Equipment Guide’s Web site at www.constructionequipline product support needs. The company’s technicians are mentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 33

LIUGONG is the second largest manufacturer of wheel loaders in the world, manufacturing 27,000 wheel loaders annually • Powered by Tier 3 Cummins engines and ZF transmissions and axles • Integrated world class components • Computer monitoring system • Rigid frame for tough working conditions • 2 to 8 yard machines available

LiuGong Construction Machinery, N.A., LLC 20823 Park Row, Katy, TX 77449 Phone 281-579-8882 Website: www.liugongna.com

Baschmann Services Inc. 1101 Maple Road Elma, NY 14059 716-655-1101 716-655-0374 Fax www.baschmann.com

Westchester Tractor, Inc. 60 International Blvd. Brewster, NY 10509 845-278-7766 845-278-4431 Fax www.wtractor.com

Frank Martin & Sons Inc. 316 Market Street Fort Kent, ME 04744 207-834-3171 207-834-3115 Fax www.f-m-s.com

Page 34 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Worldwide Leader in Concrete Paving Technology

Maine Construction Co. Saves Time With Bobcat Telescopic

The company’s V417 telescopic tool carrier lifts and carries pilings with a Bobcat grapple attachment. There are 25 approved attachments for the V417.

800-831-2320 R www.gomaco.com CONCRETE STREETS AND HIGHWAYS R AIRPORT RUNWAYS R CURB AND GUTTER R SIDEWALKS RECREATIONAL TRAILS R SAFETY BARRIER R BRIDGE PARAPET R BRIDGE DECKS R IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA

ELLIOTT & FRANTZ, INC. KING OF PRUSSIA, PA

DELMAR, DE

450 E. Church Road, King of Prussia, PA 19406

38420 Sussex Hwy. Delmar, DE 19940

610/279-5200

302/846-3033

As a marine construction firm in New England, Riverside and Pickering Marine Contractors works hard to meet customer demands while keeping a watchful eye on the fast-changing weather along the Atlantic Ocean. “Anything we can do to be more efficient and to deal with Mother Nature — which is both our enemy and our friend — is beneficial,” said Ken Anderson, who owns the Eliot, Maine, firm with his brother, Doug. “And that’s why our VersaHandler V417 telescopic tool carrier is so valuable. In just one phase of our business, it has cut our time in half. Believe me, that’s significant.” The company does commercial and residential marine construction for waterfront communities in Maine, New Hampshire and Massachusetts. Specialties include piers, docks, floats, wharves, pile driving, landscape construction and design, seawalls, dock repairs and dock rebuilds. While the Andersons continue to find more applications for the VersaHandler V417, the major use — and the real timesaver — is handling the pilings needed in building docks. “Our skid steer loader, a very versatile machine, was having difficulty picking up more than one of the pilings at a time,” Ken said. “It was a slow process to move a dozen or more pilings around in order to find the one we needed.” After reading about the Bobcat line of

telescopics in WorkSaver magazine, he contacted Bobcat of New Hampshire. “We selected the V417 because of its compact size and good lift capacity,” Ken said. “Using a Bobcat grapple, we can move two to four pilings at a time. We can telescope the grapple out 17 feet to the back of the pile to pick up the piling we want. Loading a barge to head out is completed in half the time it previously took.” The V417 is used in both the yard and at job sites. “Most of our waterside work is done with cranes and barges,” Doug said. “On a recent job, however, the water was too shallow to use our barge so we could not bring in the crane to set the pilings. We put the auger attachment on the V417, drove across the customer’s property to auger in the pilings. We were able to telescope over the water to do the work. That was much easier than doing it by hand.” The family-owned business takes pride in its workmanship, quality products, affordability and service — and in always having an Anderson on the job. Based on its ability and versatility, customers are likely to be seeing more of the Bobcat V417 as well. This story was reprinted with permission from WorkSaver Magazine, Spring 2010 Issue. (Editor’s note: This article originally appeared in the New England state supplement.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 35

Page 36 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Job Well Done…

Tilcon Connecticut Put Finishing Touches on Route 7 By Jay Adams CEG CORRESPONDENT

Poet T.S. Eliot said that April was the cruelest month, but for members of the Connecticut Department of Transportation (ConnDOT), April will mark the satisfying end of a much-needed and much-appreciated four-year highway project. In September 2006, ConnDOT Commissioner Ralph J. Carpenter announced the start of the reconstruction and widening of U.S. Route 7 from Wolfpit Road to Olmstead Hill Road in the town of Wilton. The construction kicked off a series of major highway capitol projects estimated at a total cost of $140 million for the reconstruction and widening of U.S. Route 7 from the cities of Danbury to Norwalk, Conn. The contract was awarded on Aug. 11, 2006, to Tilcon Connecticut Inc. of New Britain, Conn., at a contract value of $35,030,663. It was originally scheduled for completion in December 2009, but some right-of-way issues put things back four months to April. Final estimates of the highway work fall in the $42 million range, with some 80 percent of that money being federal and 20 percent state funded. The First Work Work began on Danbury Road (U.S. 7, 7/33/106) and on Route 33, Ridgefield Road, in 2006. Utility relocations that had been ongoing for three years prior continued to supplement and facilitate the construction activities for the widening and reconstruction of Route 7. Dewberry Goodkind of New Haven, Conn., designed the new highway work and Sept. 13, 2006, saw a promising start in work designed to improve overall traffic operations and safety, according to ConnDOT. Tilcon Connecticut Inc. soon brought in a slew of subcontractors for the four-year span of work projects (see side-

An average of 25 men worked primarily during the day, with occasional night work.

bar for a complete list), which included the reconstruction and widening of 3 mi. (4.8 km) of Route 7 from Wolfpit Road to Olmstead Hill Road, by: • Widening the highway from two lanes to four lanes • Providing left turn lanes at key intersections • Improvements to two intersecting state roads and 17 local roads • Installing 11 new traffic signals and replacing five existing signals • Plantings and wetland creation area Four bridges also were rehabilitated, the center of the work, including: • Bridge No. 941 — Route 33 over Metro-North and the Norwalk River • Bridge No. 5260 — Route 7 over Metro-North Railroad • Bridge No. 532 — Route 7 over the Norwalk River • Bridge No. 5477 — Route 7 over the Goetzen Brook In addition, five retaining walls were erected: • Wall 101 South, replacing the existing Baptist Church retaining wall • Wall No. 102, constructing a retaining wall at the intersection of Route 7/33 Bridge No. 532, one of four bridges constructed during the project, is located on Route 7 over the Norwalk River.

see TILCON page 40

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 37

North Eastern Dealers

We’ve got what YOU need... 97 Rt. 302 Pine Bush, NY 12566 845 744 2006

Check us out today @ www.hydrema.us

24 Sybil Ct. Holmes, NY 12531 845 878 4004

283 Pane Road Newington, CT 06111 860 665 7470

118 St. Nicholas Ave. South Plainﬁeld, NJ 07080 908 753 8080

NEW! 1(: 2010

1790 Route 38 Lumberton, NJ 08048 609 267 2020

1200 Northmeadow Parkway, Suite 180, Roswell, GA 30076 Tel: (877) 4-hydrema

1275 Bloomﬁeld Ave. Fairﬁeld, NJ 07004 973 227 2221

John Deere • Yanmar • Sakai • Bomag Light • Mustang • Hyundai Eager Beaver • CAM Superline • Interstate • Trail King The Hyundai –9 Loaders and Excavators Are Arriving...Call Jim and Dick for Details! DOZERS - CRAWLER

COMPACTION EQUIPMENT - SMOOTH DRUM

1997 Cat D3C LGP, #1102255, 3490 hrs, OROPS, 6-way blade, new U/C w/25" pads ........$25,000 1988 JD 450G, #1402286, 7200 hrs, OROPS, 6-way blade, Direct Drive, excellent U/C ......$25,500 1989 JD 450G, #1402224, 6748 hours, OROPS, 6-way blade, Direct Drive ..........................$22,700

2007 Bomag BMP 851, #9904240, 33.5 trench compactor, 160 hours, radio remote, Hatz $25,800 2004 Bomag BW211D-3, #CON2, 1866 hours, vib-soil, 84” drum drive, Deutz diesel ........$44,000 1997 Stone WOLFPAC 3600, #9905847, 500 hrs, vib-asphalt, 35.5” drum, HATZ diesel ........SOLD

EXCAVATORS - CRAWLER 2006 JD 444J

1978 JD 444, #1002355, Unknown hrs, OROPS, 1.5 CY, 15.5-25 ........................................$13,500 2006 JD 444J, #1410346, 430 hrs, EROPS, 2.5 CY QC GP bkt, 3rd spool, 17.5R25 ..............$81,000 2003 Hyundai HL740XTD-3, #CON10, 1502 Hrs, EROPS, 2 CY, 20.5-25 L3........................$44,500

EXCAVATORS - MINI (UP TO 12,000 LBS)

SKID STEER - MULTI TERRAIN LOADERS

2005 Hyundai R28-7, #HE203, 205 hrs, 6,060#, cab, rub-track, blade, 15" GP bkt ............$27,000 2006 Mustang ME3503, #SS02345, 200 hrs, 7715#, cab, rub-track, blade........................$29,700

2001 ASV Posi-Track 4810, #SS02259, EROPS, 8,640-# oper-weight, GP bucket ....................SOLD 2009 Bradco SPV-48, #2002346, two pin 48” forks for Skid Steer, Used ..................................$465 2002 Thomas Protough 2200, #9902326, OROPS, 2200# capacity, GP bkt ......................$11,600 2003 Mustang 2044, #SS02275, EROPS, 1450# capacity, GP bucket ..................................$15,500 2005 Mustang MTL20, #SS267, 350 hrs, EROPS, 9,500# oper-weight, GP bucket ..............$35,500 2006 Mustang MTL20, #SS02357, 995 hrs, EROPS, 9,500# oper-weight, GP bucket ..........$32,500 1996 Mustang (Sweepster) MS60P, #9902354, 60” single pin hopper broom (like new) ..$1,650 2007 IR 68”, #M818, hyd-broom for Skid Steer (New)............................................................$3,999 2005 Grouser 8’, #M758, 6-Way Blade for Skid Steer (New)..................................................$4,133

LOADER BACKHOES

2004 Hyundai R140LC-7

WHEEL LOADERS

2007 Hyundai R140LCD-7, #HE235, 700 hrs, 30,400#, 9'10" stick, blade ........................$57,000 2004 Hyundai R140LC-7, #HE02322, 1480 hrs, 30,400#, 9'10" stick, thumb....................$49,000 1999 Hyundai R250LC-3, #CON3, 2847 hrs, 53,600#, 10' stick, thumb ............................$49,900 2006 JD 80C, #1410341, 350 hrs, 15,905#, 6'11" stick, thumb, blade ................................$78,500

1994 JD 310D, # 1402245, 4650 hrs, 4WD, EROPS, GP bkt, E-hoe, 24" B-hoe bkt ..............$21,500 1994 JD 310D, # 1402256, 4100 hrs, 2WD, EROPS, GP bkt, E-hoe, 24" B-hoe bkt ..............$18,500 1999 JD 410E, #1402278, 7130 hrs, 4WD, EROPS, GP bkt E-hoe, 24" bkt............................$28,500 2000 JD 410E, #1402344, 7500 hrs, 4WD, EROPS, 4/1, E-hoe, 24" bkt ....................................SOLD 2005 JD 410G, #1402350, 5802 hrs, 4WD, EROPS, 4/1, E-hoe, 24” B-hoe bkt ..................$39,700 1989 JD 710C, #1401925, 6000 hrs, 4WD, EROPS, GP, Std-hoe, 30" bkt, HMR lines ..................SOLD

Jim Maillet 973-390-7392

G&H SERVICE, INC.

Dick Clark 973-390-7390

SERVICING YOUR EQUIPMENT NEEDS SINCE 1946

Route 206 North, 121 Water St. • Newton, NJ 07860 • Phone 973-383-3370 • Fax 973-383-5756

800-545-1278 • Website: ghserviceonline.com

Page 38 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Pinnacle’s Owsley Retires, Mackinson Named Successor Carolina Tractor and Pinnacle Cranes announced that Reed Owsley, vice president and general manager of Pinnacle Cranes, will be retiring from the company, effective December 31, 2010. Jim Mackinson has been named as Owsley’s successor and will join the company in early July. Owsley has been a key member of the Carolina Tractor executive management team since joining the company in December 2001, when Carolina Tractor acquired the distribution rights for Link-Belt Cranes in the Carolinas. His crane-industry experience positioned him well to lead the crane division at Carolina Tractor. During his tenure with Pinnacle Cranes, Owsley has been responsible for managing

all aspects of sales and service for the company. “We appreciate the great contributions Reed has made to Carolina Tractor and Pinnacle Cranes,” Carolina Tractor President and CEO, Ed Weisiger Jr. announced. “Pinnacle Cranes, under Reed’s leadership, has been a consistent, highperforming area of our company and has been regularly recognized by Link-Belt Cranes for outstanding performance.” Jim Mackinson will succeed Owsley as vice president and general manager of Pinnacle Cranes. Mackinson brings more than 28 years of industry experience to his new position at Pinnacle Cranes, most recently as president and CEO of Mackinson Crane, Middlesex, N.J., and Equipco Sales

and Rental Corporation, Somerville, N.J. “Jim’s relentless customer focus and entrepreneurial spirit will serve our customers and employees well,” Weisiger said. “We are pleased to have Jim join the Carolina Tractor senior management team.” During this transitional period, Owsley will work to acquaint Mackinson with employees, customers and suppliers, as well as actively seeking opportunities with a number of national crane operators. Mackinson participates in several crane industry associations; including the Specialized Carriers and Rigging Association, Associated Equipment Distributors, and the Utility and Transportation Contractor’s Association. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

www.elliottfrantz.com

Would you like Demo a Series 3 Gradall excavator at any of these Elliott & Frantz locations:

10107 Residency Rd. Manassas, VA 20110 (703) 257-2381 450 E. Church Rd. King of Prussia, PA 19406-0359 (610) 279-5200

YOUR COMPANY

Contact Elliott & Frantz for...

featur ed in Construction Equipment Guide?

THE POWER OF

If so, please contact us:

in Delaware, Maryland, Pennsylvania and Virginia

470 Mar yland Drive, For t Washington, PA 19034

800/523-2200

10421 Guilford Rd. Jessup, MD 20794 (410) 792-9134

Thomas 153 SSL, 650 hours, CALL Thomas 245 HDK $8,900 215/679-5958 JD Equipment www.jdequip.com

PROVEN POWER FOR LESS MONEY...

1457 Oak Ridge Place Hagerstown, MD 21740 (301) 733-8100

Rental tractors from Hoober

38420 Sussex Hwy Delmar, DE 19940 (302) 846-3033

Hoober offers extremely affordable rental and lease purchases on Tractors and Scrapers, backed by excellent Hoober service.

Elliott & Frantz locations can demo Gradall’s Series 3 excavators. The authorized Gradall® distributor for Delaware, Maryland, Pennsylvania and Virginia, Elliot & Frantz can show you how the Series 3 excavators deliver greater productivity, greater operator efficiency and lower operating costs. Series 3 models are available with highway speed, on/off highway and crawler undercarriages – all designed and built for efficient travel just about anywhere. With high pressure, load sensing hydraulics and a low-profile telescoping boom, your Series 3 Gradall can raise your productivity expectations for one man and one machine. Get the facts and a demo by contacting your nearest Elliott & Frantz location.

www.gradall.com

For more details and quotes call Charlie Hoober or Larry Herr.

800-732-0017 or 717-768-8231

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 39

10 REASONS ROCKLAND THUMBS ARE THE BEST 6. Narrow Design No width or interference problems. Positive 3-point pickup.

1. Patented Thumb Locks (U.S. Patent 6,209,237) No drift down with Rockland hydraulic thumbs. No slop or accelerated pin wear!

7. Coupler Length Options Couplers usually require longer thumbs. Rockland has it figured out.

2. Cylinder Rod Protection Another Rockland exclusive, all Rockland hydraulic thumbs are equipped with cylinder guards. 3. Heat-treated Replaceable Bushings and Pins All pivot points are sealed and lubricated.

8. Wide Thumb Option If your application demands a wide thumb, specify a Rockland wide thumb and get all the other exclusive Rockland features.

4. Easy Transport Rockland thumbs will never hit your excavator’s boom when in the transport position. You don’t have to remove a Rockland thumb in order to transport your machine.

9. Easy Installation Rockland thumbs quickly mount to the underside of the excavator stick. No special pivot pins are required.

5. Lightweight Better machine performance. Why sacrifice capacity hauling around more steel than you need?

10. Quick Shipment Order from your favorite dealer today. If he doesn’t have one in stock, we do!

800-458-3773 r o c k la n d m f g.c o m

FINANCING AVAILABLE

286 Central Ave. South Kearny, New Jersey 07032

800-255-5512 Phone 973-589-4100 Fax 973-589-4811 E-mail: info@tes-inc.net Website: www.tes-inc.net

1997 USTC Taxi King 32 Ton, 74.4' Boom, 45' Jib, S/N 400003434, FOB: New Jersey - POR

2008 Elliott L60R 62' Working Height, 40" x 60" Platform, 14' Steel Bed, 2009 Sterling 240 HP, 29,000 GVW, AC FOB: NJ - POR

1961 Link-Belt HC78A 30 Ton, S/N 70H1709, 3 axle, 55' Boom, Angle Boom, FOB: New Jersey - POR

1983 Link-Belt HC258, 200-ton, 300' main boom-tubular, S/N 28H31668 FOB: New Jersey - POR

Talbert AC-20, 40,000 lb. payload capacity, 19’ Deck x 102” - Spring assisted Ramps, Self Cleaning, Air Brakes - 60” Beavertail - POR

ADDITIONAL EQUIPMENT FOR SALE 1998 USTC Taxi King FOB: NJ....................................................................POR 1961 HC-78A FOB: NJ..................................................................................POR NEW Kalmar DCD250-12LB FOB: NJ........................................................POR 1998 Kalmar DCD70-40E5 FOB: NJ............................................................POR 1974 Link-Belt HC 218 FOB: NJ ................................................................POR 2005 Shuttlelift 5560B FOB: NJ ................................................................POR 2004 Shuttlelift 3340B FOB: NJ ..................................................................POR 1999 Link-Belt LS 218H FOB: NJ................................................................POR

Authorized Dealer TRAILER

Page 40 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Major Drainage Issues Impact Widening Work Along Route 7 TILCON from page 36

• Wall No. 103, a wall constructed at Station Access Road and Commonfund Drive • Wall No. 104, a retaining wall built at Route 7 and the Perry Green property • Wall No. 101 North, a new wall put up in front of property at 463 Danbury Road Stage by Stage The work, of course, per most DOT projects, was done in stages. The first stage included: • Drainage outlets construction • Pavement widening and stage construction, allowing the new roadway and other structures to be construction in three main stages. • Final pavement courses, pavement markings, traffic signals and signing, to complete the project this March/April. The final completion date is scheduled for April 23, 2010. When the work is done, according to ConnDOT, some 350,000 lbs. (158,757 kg) of structural steel will have been deployed and some 4,600 cu. yds. (3,516 cu m) of concrete poured. Some 70,000 tons (63,502 mt) of asphalt will be used for the roadways and bridges with 450,000 lbs. (204,116 kg) of rebar. Some 100,000 cu. yds. (76,455 cu m) of earth and raw materials will have been removed from the 3 mi. site. According to several ConnDOT officials, including District Engineer Mark D. Rolfe, “An average of 25 men per shift, with the work being done in one shift,” worked primarily during the day, with occasional night work that was required to establish stage construction work zones, paving and “other miscellaneous work that required work to be done in the existing roadway.” Some Delays Commuters in the Norwalk area were used to seeing delays over the road since 2006. According to Rolfe and his fellow engineers, “The existing road was two lanes wide, with sporadic signalization and heavy traffic volume during rush hours, resulting in considerable delays, due to volume.” The work did not proceed without some conflicts, according to ConnDOT. One ongoing conflict is between Northeast Utilities 345 KV transmission line (which runs parallel with Route 7 for the length of the project) and proposed drainage and utility installations on the project. ConnDOT officials said this issue is being addressed, with the full impact to be determined. Impacts include: • Major drainage impact, requiring five major drainage revisions and numerous field revisions, to resolve the conflicts. • Utility relocations • The associated costs are fully paid with Northeast Utilities funds. Another conflict included the AT&T utility relocation on Bridge No. 532. This issue involved the relocation of the existing AT&T duct bank, in lieu of removal and replacement, as originally proposed. This revision, which is complete as of this writing according to officials, was approved to save approximately nine months

of splicing time and the associated costs to the department. Further issues included an AT&T proposed pole relocation in front of No. 187 Danbury Road, which was in direct conflict with the 345 KV Transmission line. As a result, the pole had to be relocated into the private property. AT&T and the property owner had difficulty reaching an agreement for an easement for more than a year, according to DOT. “However, Mr. Bill Brennan, First Selectman of Wilton, through his good office, was able to persuade the property owner to resolve the easement agreement with AT&T and thereby mitigated further delays to the project,” said the project engineer. Bigger Drills The contractor had to adjust the price for furnishing and installing 54-in. (137 cm) diameter drilled shafts. These were due to a revised definition of competent rock, meaning that an increase in the depth of core borings and drilled shaft excavation were required to encounter competent rock. “The contractor’s claim of a significant change in the character of the work was determined to be valid and unit price adjustments on the drilled shafts and integrity testing items was determined to be necessary,” said ConnDOT in a statement. A new retaining wall is required at Route 7, to address the fact that rock, anticipated in the original design, is not present at this location. To resolve this matter, a cast-in-place concrete retaining wall is being designed. Bracing the existing poles to build the wall was resolved through the use of 11-ft. (3.3 m) deep adjacent temporary bracing poles. Another interesting aspect of the project has been labeled the “Our Lady of Fatima Drainage Outlet.” According to ConnDOT, this was identified as a critical drainage outlet that had to be completed in Phase A, prior to starting the pre-stage construction work at the south end of the project. Difficulties were encountered due to the stipulated agreement between the state and Our Lady of Fatima Church that no construction would take place between Sept. 1 and May 1 of each year. The District and ConnDOT Right Of Way worked vigorously through the Attorney General’s office to modify the stipulated agreement. Hence the drainage work was successfully completed in the Spring of 2007, thereby mitigating significant project delays. “This project, due to the nature and extent of the work, caused considerable disruption to the daily routines of residents, property owners and businesses along the roadway,” said Rolfe. “By disseminating timely information regarding the schedule of the work, and with the cooperation and commitment from all project stakeholders, including the department, the contractor, the town of Wilton, the designer, the consultant inspector and the major utilities, the project has received positive responses from all quarters and remains on schedule.” Rick Birge, manager of Construction of Tilcon, added “Through cooperation with all involved parties, the project went well.” (Editor’s note: This article originally appeared in the New England state supplement.) CEG

Wall 101 North, another new wall, was put up in front of property at 463 Danbury Road.

April will mark the end of a much-needed four-year highway project; the widening of U.S. 7 from Wolfpit Road to Olmstead Hill Road in the town of Wilton.

Wall 101 South, one of five retaining walls erected, replaced the existing Baptist Church retaining wall.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 41

All New in Box CALL Toll Free

800-523-2200 Ext. 197 (3) Caterpillar Earthmovers, D9T, D5M and 315C, 1:87 Scale ................................................................................$75

Set of three Mack Granite Dump Trucks, 1:64 Scale ........$125

Allis-Chalmers HD21 Dozer/Ripper, 1:50 Scale ..........$80 Bantam C-35 Crawler Backhoe, 1:50 Scale ................$65 Bantam C-35 Crawler Shovel, 1:50 scale ....................$65 Bantam C-35 Dragline, 1:50 Scale ..............................$65 Bobcat A300 Wheel Loader, 1:25 Scale ......................$40 Bobcat M610 Golden 50th Anniversary Skid Steer Loader ..........................................................................$50 Bobcat S175 Skid Steer Loader, 1:50 Scale ................$18 Bobcat Tractor/Trailer Set, 1:50 Scale ........................$80 Caterpillar Vintage Twenty Tractor w/metal tracks, 1:16 Scale ............................................................................$60 Caterpillar No. 12 Motor Grader, 1:87 Scale ..............$25 Caterpillar AP655D Paver, 1:50 Scale ........................$55 Caterpillar CB-534D XW Asphalt Compactor, 1:50 Scale .. ....................................................................................$40 Caterpillar D6K XL Track Type Tractor, 1:50 Scale ......$45 Caterpillar D7E Track Type Tractor, 1:50 Scale ..........$60 Caterpillar D8R Track Type Tractor, 1:50 Scale ..........$45 Caterpillar D10T Track Type Tractor, 1:50 Scale ........$75 Caterpillar D11R Track Type Tractor, 1:50 Scale ........$45 Caterpillar D11T Track Type Tractor, 1:50 Scale ........$70 Caterpillar 140H Motor Grader w/ripper & scarifier, 1:50 Scale ............................................................................$40 Caterpillar 140M Motor Grader, 1:50 Scale ................$60 Caterpillar 226B2 Skid Steer Loader w/tools, 1:32 Scale.. ....................................................................................$30 Caterpillar 247B2 Multi-Terrain Loader, 1:32 Scale....$30

Caterpillar D10T Track Type Tractor, 1:50 Scale ............$75

Caterpillar 272C Skid Steer Loader, 1:32 Scale ..........$30 Caterpillar 302.5 Mini-Excavator, 1:32 Scale ..............$35 Caterpillar 323D L Excavator, 1:50 Scale ......................$50 Caterpillar 365C L Front Shovel, 1:50 w/metal tracks ..$70 Caterpillar 420E Backhoe/Loader, 1:50 Scale ............$45 Caterpillar 432E Side Shift Backhoe Loader, 1:50 Scale .. ....................................................................................$45 Caterpillar 511OB Excavator, 1:50 Scale ....................$75 Caterpillar 611 Motor Scraper in display case, 1:64 Scale ............................................................................$10 Caterpillar 623G Elevating Motor Scraper, 1:50 Scale$35 Caterpillar 725D Articulated Truck, 1:50 Scale ..........$30 Caterpillar 775E Off-Highway Truck in display case, 1:64 Scale ............................................................................$15 Caterpillar 777D Off-Highway Truck, 1:50 Scale ........$40 Caterpillar 825 Soil Compactor, 1:50 Scale ................$35 Caterpillar 924 G Versalink Wheel Loader: 1:50 Scale .... ....................................................................................$35 Caterpillar 963D Track Loader, 1:50 Scale ....................$45 Caterpillar 966A Wheel Loader, 1:50 Scale ................$50 Caterpillar 977 Traxcavator, 1:50 Scale ......................$30 Caterpillar 988H Wheel Loader, 1:64 Scale ................$30 Caterpillar 992 Wheel Loader, 1:50 Scale ..................$50 Caterpillar 994F Wheel Loader, 1:50 Scale ................$95 Gradall XL4300 Rubber Tired Excavator, 1:32 Scale ..$75 Gradall XL5200 Track Excavator, 1:50 Scale ..............$75 Hitachi Zaxis 450LC Excavator, 1:50 Scale..................$45 International 175 Crawler Loader w/Multi-Purpose Bucket, 1:50 Scale........................................................$50 International TD-15 Dozer, 1:87 Scale ........................$45 International TD-24 Military Dozer, 1:50 Scale ..........$50 International TD-24 Ag/Crawler, 1:50 Scale ................$40 International TD-25 Dozer, 1:87 Scale ........................$45 JCB 3CX Backhoe Loader, 1:50 Scale ..........................$50 JCB 456 ZX Wheel Loader, 1:50 Scale ........................$70 JCB Vibromax VM 115 Soil Compactor, 1:50 Scale ....$45 John Deere MC Crawler Dozer, 1:16 scale ..................$75 John Deere MT Gas Farm Tractor, 1:16 Scale ............$50 John Deere 320 Skid Steer Loader, 1:16 Scale ..........$24 Komatsu 960E Mining Truck, 1:50 Scale ..................$275 Komatsu PC300LC-8 Excavator, 1:50 Scale ................$70 Komatsu WA500-6 Wheel Loader, 1:50 Scale ............$60 Komatsu D51 EX Dozer, 1:50 Scale..............................$60

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Komatsu D51 PX Dozer, 1:50 Scale ............................$55 Komatsu D375 Dozer, 1:50 Scale ................................$75 Komatsu GD655 Motor Grader, 1:50 Scale ..................$60 Komatsu WB146 Backhoe Loader w/tools, 1:50 Scale$45 Komatsu Mack Granite MP w/Talbert Lowboy Trailer, 1:50 Scale ....................................................................$80 LeTourneau Super C Scraper w/Cab, 1:50 Scale ........$80 Link-Belt 210 X2 Excavator, 1:40 Scale ......................$65 Northwest 25-D Backhoe, 1:50 Scale ........................$100 Northwest 25-D Shovel, 1:50 Scale ..........................$100 Oliver OC-12 Crawler Dozer, 1:16 scale ......................$50 Oshkosh Front Discharge Mixer Truck, 1:34 scale ......$70 Peterbilt Tractor/Trailer w/Caterpillar D8R, 1:50 Scale .... ....................................................................................$95 Volvo G970 Motor Grader, 1:50 Scale..........................$70 Volvo SD-122 Soil Compactor, 1:72 Scale ..................$40 Volvo A25C Articulated Truck, 1:50 Scale....................$30 Volvo BL71 Backhoe Loader, 1:50 Scale ....................$45 Volvo EC240B Excavator, 1:50 Scale............................$45 Volvo EC280 Excavator, 1:50 Scale..............................$24 Volvo FH12 Tractor/Trailer w/Volvo L150C, 1:50 Scale...... ....................................................................................$60 Volvo L90E Wheel Loader, 1:50 Scale ........................$70 Volvo L60E Wheel Loader w/Attachments, 1:50 Scale$65 Volvo L150C Wheel Loader, 1:50 Scale ......................$30 Volvo L350F Wheel Loader, 1:50 Scale ......................$80

VINTAGE SPECIALS

Bobcat 743B Skid Steer Loader, 1:19 Scale ..........$42.50 Bobcat 225 Mini-Excavator, 1:25 Scale ..................$42.50 Caterpillar 825-B Landfill Compactor, 1:50 Scale ......$15 Caterpillar 611 Scraper, 1:64 Scale ............................$15 Caterpillar D25D Articulated Truck, 1:64 Scale......$12.00 Conexpo 2005 Con/Agg, 1:50 Scale ........................$42.50 Hitachi Crawler Crane, 1:96 Scale ..............................$24 International TD20E Dozer, 1:64 Scale ........................$20 JCB 435 Compact Wheel Loader, 1:50 Scale ..............$15 Melroe Bobcat M200 Skid Steer Loader, No Box, 1:25 Scale ............................................................................$29 Michigan L320 Wheel Loader, 1:50 Scale ..................$25 Volvo A25 Articulated Truck, 1:50 Scale......................$15 Yanmar B37 Mini-Excavator, 1:32 Scale......................$15

Shipping and Handling Additional

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Page 42 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

JCB Fields Squad for World Cup Duties in South Africa A squad of nine JCB Teletruk forklifts is playing a key role in preparing major stadiums that are hosting games during the 2010 World Cup tournaments in South Africa. The JCB Teletruks have been called up for general materials handling duties during the final construction and fit-out stages of hospitality suites and visitor facilities in and around the six principal World Cup venues in time to welcome thousands of fans from around the world. All of the Teletruks have been supplied by Clarklift South Africa (PTY) Ltd., the JCB Industrial dealer in South Africa. Two of the JCB Teletruks, manufactured by JCB Utility Products at its Cheadle plant in Staffordshire, have been deployed at Soccer City, Johannesburg — the main 94,000capacity World Cup stadium that will stage the opening games as well as the 2010 World Cup Final. There also are two machines working at the Durban Stadium and at Cape Town’s Green Point Stadium, while there is one machine on each site at the Royal Bafokeng Stadium in Rustenburg, Free State Stadium at Bloemfontein and Peter Mokaba Stadium at Polokwane. Mike Poxon, international sales manager — JCB Industrial, said: “The tasks at the World Cup stadiums required a forklift truck that was flexible and capable of working on rough ground — and the JCB Teletruk fitted the bill perfectly. “The Teletruk provides a superior lift capacity and forward reach that extends over debris and stock piles of building materials, as well as a compact size and 4WD capability to handle rugged site conditions and limited working

A JCB Teletruk forklift takes on materials handling duties outside Soccer City stadium in Johannesburg, South Africa.

spaces.” This is not the first time that JCB machines have been called up for World Cup duty — a 24 ton (22 t) JCB JS220 tracked excavator was used in the construction of the showcase Allianz Arena in Munich — the main stadium for the

2006 World Cup in Germany and now home to FC Bayern Munich. “We are delighted that JCB’s world-renowned products have once again been selected to play an integral part in the world’s largest football competition,” Poxon added.

Nortrax Northeast Team, Bud Iverson Ease of Use, Social Win Morbark ‘Dealer of the Year’Award Media Links Accent The Nortrax Northeast team and Bud Iverson are winners again. For the third consecutive year Nortrax and Iverson have been awarded with the Morbark Dealer of the Year Award. “The 2009 award is well deserved,” said John Foote, vice president of sales and marketing of Morbark. “Nortrax Northeast earns the honor by consistently delivering professional, high quality sales, service, and support to their customers. When asked what the secret to his success is, Bud always responds that it represents great teamwork. Our relationship with Nortrax is truly a model of how dealers and manufacturers should work together to solve problems for our customers.” For more information, visit www.morbark.com or www.nortrax.com.

Modern’s New Site

Bristol, Pa., headquartered Modern Group has launched its latest generation Web site at www.moderngroup.com. “We’ve put months into the development of our new site. We designed the site with our customers in mind. The ease of navigation and providing detailed product information for both new and used equipment was paramount. We have utilized product showroom for the many manufactures we represent. Our goal is to make it easier than ever for our customers to buy, rent, service, get parts or even get training,” said Dave Griffith, CEO. “We also wanted our new site to be social media friendly with links to our Facebook and Twitter accounts. We are committed to deepening our social media presence as a further means to communicate to customers and the industry. We want to continue to be seen as the leading edge distributor in the industry. In addition, we will soon be launching Modern Ideas shortly, which will be our ongoing e-newsletter providing helpful tips, how to’s, and thoughts about the industry. We view that our new site will be another of the many ways Modern helps keep our customers rolling,” added Paul Farrell, COO. For more information, call 800/8-MODERN or visit Bud Iverson (L), Morbark product line manager at Nortrax Northeast receives the 2009 Dealer of the Year award from Lon Morey, president of Morbark Inc. www.moderngroup.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 43

DEPENDABLE

New Holland Construction Equipment is built tough to handle the most demanding jobsite conditions. Rugged construction, reliable engines, less downtime and service is a snap. See us today for a demonstration.

DOZERS 2005 N.H. DC95 Crawler Dozer w/ Wide Track, Cab, 1447 Hrs ......................................................................................$59,900 2006 N.H. D75 Crawler Dozer w/ Wide Track, Cab, 1159 Hrs.... ......................................................................................$54,875 2006 N.H. D95 Crawler Dozer w/ Wide Track, Cab, 1001 Hrs.... ......................................................................................$80,875

SKID STEER 2004 NH LS150 Skidsteer, OROPS, 6100 Hrs, Good Cond ........ ........................................................................................$8,995 2007 NH C185 Track Skidsteer, Cab, Heat/AC, Pilot, 84” Bkt, 630 Hrs ..........................................................................$37,625

BACKHOES 2004 LB75.B TLB, 4wd, Cab, Heat/AC, Extendahoe, Pilot, 1845 Hrs..................................................................................$33,500

MISC. EQUIPMENT 2005 Manitou 634-120LSU Telehandler, 34’ Reach ....$33,895 2006 Cam 6 Ton, 8x18 Decks Over Trailer, Excellent Condition .. ........................................................................................$3,250

EXCAVATORS 2009 N.H. E215B Excavator w/ Cab, 1362 Hrs ..........$125,875 2009 N.H. E135B SR Excavator w/ Cab, Dozer Blade, 596 Hrs .. ....................................................................................$155,000 2006 N.H. E70 SR Excavator w/ Cab, Blade, Rubber Track & Hyd. Thumb, 1067 Hrs ..................................................$64,000 2007 N.H. E70SR Excavator w/ Cab, Blade, Steel Track, 383 Hrs..................................................................................$87,250 2007 Kobelco SK210-8LC Excavator ............................$89,900 2000 Cat 312BL Excavator w/ Cab, Wain Roy Coupler, 36" Bkt, Thumb, 3878 Hrs ..........................................................$43,500

ATTACHMENTS VARIETY OF BUCKETS ..................................STARTING @ $295 2006 FFC 60" Skid Steer Snow blower w/electric swivel, Like New ..................................................................................$3,000 2007 Pro-Tech 14L 14' Snow Pusher ..............................$3,995 1997 Pro-Tech Hyd. Fold Snow Pusher, 16' w/ Rubber Edge .... ........................................................................................$5,995

C A P I TA L T R A C T O R I N C . 1135 State Rt. 29, Greenwich, NY 12834 518/692-9611 FAX 518/692-2210

Since 1966

978 Albany-Shaker Rd., Latham, NY 12110 518/785-3377 FAX 518/783-5362

www.capitaltractorinc.com

UNBEATABLE POWER AND EFFICIENCY. New Holland loader backhoes out-push, out-dig, and out-power the competition. • 4.5-liter turbocharged engines – more horsepower and more torque • Superior backhoe dig force and crowd power – outstanding performance in tough or hard-packed conditions • Narrowest backhoe boom in the market – the best visibility into the trench • Fast backhoe swing – faster cycle times • Tool Carrier and Long Reach versions available See your New Holland construction equipment dealer today.

Page 44 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ARE YOUR CREWS TRAINED ACCORDING TO OSHA STANDARDS TO WORK SAFELY IN THE TRENCHES? Location

June

July

Asheville, NC Athens, GA Location Atlanta, GA

06/25/10 TE/CS X November 06/02/10 TE/CS x 06/30/10 TE/CS x X x 06/16/10 TE/CS x 06/11/10 TE/CS x X x 06/01x/10 TE/CS 06/2908/06/07 /10 TE/CSTE 06/24/10 TE/CS 06/0308/23/07 /10 TE/CSTE

X X X

Alexandria, VA* Annapolis, MD* Augusta, GA Asheville, NC Baltimore, MD* Baltimore, MD* Blacksburg, VA Blacksburg, VA Boone, NCNC Boone, Bristol, TNMD* Bowie, Charleston, SC Charleston, SC Charlotte, Charlotte, NCNC

Charlottesville, VA

Charlottesville, VA Columbia, SC Columbia, SC MD Cumberland. Fayetteville, NC VA Falls Church, Frederick, MD NC Fayetteville, Greensboro, Frederick,NC MD

X x X x X x X x 06/04x/10 TE/CS

Fredericksburg, VA* Greenville, NC MD Gaithersburg, Greenville, SC NC Greenville, Hagerstown, Greenville,MD SC Harrisonburg, Greensboro,VANC Jacksonville, NC VA Harrisonburg, Jacksonville, Knoxville, TN NC Knoxville,VATN Lynchburg, Lynchburg, Manassas, VA VA Manassas, VA Myrtle Beach, SC Myrtle News, Beach,VASC Newport Newport Norfolk, VA News, VA

06/09x/10 TE/CS 06/22x/10 TE/CS 06/1508/22/07 /10 TE/CSTE X 08/21/07 TE X 08/28/07 TE X x X x 06/1708/02/07 /10 TE/CSTE 06/2308/13/07 /10 TE/CSTE X 08/07/07 TE 06/0808/15/07 /10 TE/CSTE

Norfolk, VA Raleigh, NCNC Raleigh, Richmond, VA Roanoke, VA VA Richmond, Savannah, GA Roanoke, Staunton, VA VA Staunton, Suffolk, VA VA Suffolk, VA VA Virginia Beach, Virginia Beach, Wilmington, NC VA

06/1008/08/07 /10 TE/CSCS 06/1808/09/07 /10 TE/CSTE X 08/14/07 TE X 08/16/07 CS X 08/29/07 TE X 08/01/07 TE X x X x

August X X December 08/25/10 TE/CS

x x 07/28/10 TE/CS X x 07/14/10 TE/CS 08/11/10 TE/CS x X X 09/26/07 TE X 08/20/10 TE/CS x 07/27/10 xTE/CS 08/24/10 TE/CS 09/04/07 TE 07/22/10 09/19/07 TE/CS CS 08/19/10 TE/CS 07/01/10 09/20/07 TE/CS TE 08/26/10 TE/CS 07/29/10 09/11/07 TE/CS TE X 08/10/10 TE/CS 09/18/07 TE 07/23/10 xTE/CS X 07/07/10 xTE/CS X 07/13/10 xTE/CS X 07/02/10 xTE/CS 08/27/10 TE/CS 07/30/10 xTE/CS X X x 07/20/10 xTE/CS 08/17/10 TE/CS X X x X X 09/27/07 TE X X x x X X 07/09/10 xTE/CS X 07/15/10 xTE/CS 08/12/10 TE/CS 07/21/10 09/10/07 TE/CS TE 08/18/10 TE/CS 09/05/07 TE X X 07/06/10 xTE/CS 08/03/10 TE/CS 09/12/07 TE 08/31/10 TE/CS 07/08/10 09/06/07 TE/CS TE 08/05/10 TE/CS 07/16/10 TE/CS 08/13/10 TE/CS X 08/06/10 TE/CS 09/13/07 TE X X x X X x X X x X X x X 08/04/10 TE/CS

Wilmington, NC x x TE=Trench CSCS= Training, =Confined Space Training, TE= Trench&&Excavation Excavation Training, Confined Space Training, SP=Spanish andx X==No Class SP= SpanishTraining TrainingClass Class, No Class

SEMINAR Topics: • Intro to Trench & Excavation Safety • The OSHA Excavation Standard • Protective Systems • Soil Mechanics & Analysis • Job Planning

CALL CHARLIE at: (603) 899-2000

NO SALES TAX 1996 Cat D4C HST, 4500 hours, pins turned, new segments and cutting edge, $19,500

1995 CAT 938F, 5300 Hours, Good 20.5 radials, 3.5 yd pin on bucket, $39,500

CAT Side 3 Yrd side Dump Bkt, w/CAT quick attach cplr, not IT, fits 938G and/or others Good cond., $6,000

2003 Cat 311CU, 20” pads, 8’3” push blade, 34” bucket w/teeth, $49,500

2007 Cat 420E IT, Tilting Grading Bucket for Rear, 24” Digging Bucket, 1460 Hrs $62,500

2000 John Deere 5410, 65 H.P., 2WD, with Woods 3180 Series 3 15’ Batwing mower, $12,500

2006 KW W 900L, Cat 470 H.P., 13-spd, 46 full lock rears on Hendrickson Air-ride, wet line. Clean Southern Truck, $57,500

2006 Cat 304C CR, 19” Bucket, 78” Blade, Aux. Hyd, 2000 Hrs $24,500

2005 John Deere 544J, 3yd, JRB Coupler, A/C, 2900 Hrs, 20.5 Bias $65,000

W W W. 2 0 2 T R U C K . C O M

RANSOME CAT LOCATIONS CAN NOW SERVICE YOUR COMMERCIAL AND TRUCK ENGINES TOO! Whitehall Allentown Fleetwood

P E N N SY LVA N I A

Requirement Overview

Bensalem N E W

the authority in underground equipment and training rentals

sales

supplies

West Chester

training

JERSEY

Hammonton Bear

Greensboro, NC 1.866.587.3624

DC/Northern VA 1.888.387.3624

Greenville, SC 1.866.957.3624

Atlanta, GA 1.877.587.3624

Norfolk, VA 1.866.887.3630

Knoxville, TN 1.866.999.8344

Charlotte, NC 1.877.587.3624

Baltimore, MD 1.866.951.0809

Birmingham, AL 1.877.587.3624

Raleigh, NC 1.888.587.3624

Myrtle Beach, SC 1.866.586.9404

Jacksonville, FL 1.866.957.3624

Richmond, VA 1.866.887.3630

Charleston, SC 1.866.957.3624

www.CobleTrenchSafety.com

1-800-753-4CAT www.ransome.com

MLK Memorial in D.C. to Take Shape Live on Webcam WASHINGTON (AP) The memorial slated for the National Mall in Washington honoring Martin Luther King Jr. will slowly take shape in view of anyone in the world. The group building the memorial launched an “MLK Construction Cam” online to show progress on the $120 million project. So far, a large plot of land along the Tidal Basin has been cleared. It will take months to drive 340 concrete piles into the ground to support the granite memorial plaza and a touring statue of King. The 28-ft. central sculptures will arrive in pieces from China, where they were created. Sculptor Lei Yixin is scheduled to assemble the pieces this fall. Organizers aim to complete the project in 2011. They have raised $107 million of the $120 million needed for the memorial. For more information, visit www.mlkmemorial.org/ earthcam. Keep Up With All the Industry News Subscribe to Construction Equipment Guide Today!

Toll Free 800/523-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 45

MIDLANTIC MACHINERY INC.

2240 Bethlehem Pike Hatfield, PA 19440 215/822-0145 Harrisburg, PA 717/652-3190 Baltimore, MD 410/247-2100 Delmar, DE 302/846-0224 Odessa, DE 302/449-2850 Downingtown, PA 610/518-5870 Wilkes-Barre, PA 570/824-9891

100%

(the LOGICAL CHOICE for your next excavator)

Komatsu excavators have set the standards for productivity, operator comfort and reliability over the years. And, with the introduction of our mid-sized –8 series, the standards have been raised yet again. • Tier-3 engines deliver reduced emissions without sacriﬁcing power or productivity. • Electronics, engine and hydraulics are optimized for maximum efﬁciency and minimum fuel consumption (10% reduction compared to –7 models). • Multi-function LCD monitor provides critical operating information at a glance (and it can do this in 10 languages). From enhanced safety features to extended maintenance intervals, the PC200LC-8, PC220LC-8 and PC270LC-8 show what happens when the best engineers put the latest technology to work. The results are always…

100% Komatsu.

866.513.5778

www.komatsuamerica.com

KA03

PENNSYLVANIA Pittsburgh, PA 412/343-2300 Clarion, PA 814/226-4100 Clearfield, PA 814/765-4311 Somerset, PA 814/443-2867 Cambridge Springs, PA 814/398-8819 NEW YORK Buffalo, NY 716/877-1992 Henrietta, NY 585/334-6770 Syracuse, NY 315/463-8673 Albany, NY 518/785-4500 Watertown, NY 315/788-5512 Endicott, NY 607/748-3400 Olean, NY 716/372-8822 NEW HAMPSHIRE Manchester, NH 603/627-7696 MAINE Cumberland, ME 207/829-6969 Bangor, ME 207/942-0177 VERMONT East Montpelier, VT 802/223-9689 EDWARD EHRBAR, INC

www.ehrbar.com 4 Executive Plaza Yonkers, NY 10701 914/738-5100 Holbrook, NY 631/563-7600 New York City, NY 718/626-3331 42 Kenosia Ave. Danbury, CT 203/743-0088

BINDER MACHINERY CO.

C.N. WOOD CO, INC.

PINE BUSH EQUIPMENT, CO. INC.

EAST PBE, INC.

2820 Hamilton Blvd. South Plainfield, NJ 07080 908/561-9000 201 North Route 73 Winslow Township, NJ 08095 856/767-5900

Avon, MA 508/584-8484 Woburn, MA 781/935-1919 Whately, MA 413/665-7009 Johnston, RI 401/942-9191

Route 302, P.O. Box 106 Pine Bush, NY 12566 845/744-2006 Holmes, NY 12531 845/878-4004

283 Pane Road Newington, CT 06111 860/665-7470 Fax: 860/665-7478

Page 46 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WHY BLAST WHEN YOU CAN TRENCH THROUGH Serving Southern NY Long Island NJ and PA

SOLID ROCK?

North Atlantic

RENTALS

800.624.0623 Vermeer North Atlantic offers a full line of specialized Trenching , Boring, Chipping and Cutting Equipment. Call our rental specialist to discuss your next job and discover that Vermeer equipment can help you beat your job!

Concrete Cutters

Directional Drills

For all your

Concrete Equipment

Vacs

Screens

Grinders

Chippers

Daily, Weekly, Monthly Rates and Purchase Options Available

Trenchers

In Stock

Stump Cutters

In Stock

needs - call

K P E C

ING OF RUSSIA QUIPMENT ORP.

111 East Church Road King of Prussia, PA 19406

610/265-1036 Sales • Service • Rentals • Parts

Benner-Nawman DC-20WH Rebar Cutter • Electric/Hydraulic • Cuts to #6 (3/4") grade 60 • Three second cutting speed • 15 tons of cutting pressure

• Safer and faster than using a torch • 25 lbs and comes with carrying case • 115 v / 10 amps • Electric/Hydraulic

DC25X Rebar Cutter • Cuts to #8 (1") grade 60 • Five second cutting speed • 30 tons of cutting pressure

• 49 lbs and comes with steel carrying case • Larger cutters and benders are available • 115 v / 12 amps

Visit Us at Our Web Page: www.kingofprussiaequipment.com for Our Product Line

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 47

These workmates put more work within reach. Name the job and there’s a 310SJ or 410J Backhoe Loader to help you get it done. You’ll benefit from uptime-enhancing features such as advanced diagnostic monitors, solid-state electronics, and an improved cooling system. Other advantages include ground-level service points, low maintenance costs, smooth and responsive hydraulics, and best-in-class resale value. Go for the Total Machine Control (TMC) and tool carrier options and take on even more work. To put a 310SJ or 410J Backhoe Loader to work for you, give us a call.

CONNECTICUT

DELAWARE

The W.I. Clark Company Wallingford, CT 06810 203/265-6781 Brookfield, CT 06804 203/775-1203 Plainfield, CT 06374 860/546-4808

Standard Equipment, Co. Schmidt Equipment, Inc. Middletown, DE North Oxford, MA 01537 302/376-0784 508/987-8786 Billerica, MA 01862 978/667-4345 Plymouth, MA 02363 MARYLAND Standard Equipment, Co. 508/830-9997 No. Swansea, MA 02777 Baltimore, MD 508/379-9810 410/687-1700 Springfield, MA 01104 Delmar, MD 413/543-5595 410/546-1090 Frederick, MD 301/874-5500 White Plains, MD 301/870-1438

MASSACHUSETTS

NEW JERSEY G&H Service, Inc. Newton, NJ 07860 973/383-3370 Harter Equipment, Inc. Millstone Twp, NJ 08535 732/446-7600 1-888-HARTER-1

NEW YORK

Five Star Equipment, Inc. Jesco, Inc. Rochester, NY 14624 118 St. Nicholas Ave. 585/235-3011 South Plainfield, NJ 07080 Kirkwood, NY 13795 908/753-8080 607/775-2006 800/241-7070 Fax: 908/753-7853 Syracuse, NY 13057 315/452-4560 1275 Bloomfield Ave. Fairfield, NJ 07004 Orchard Park, NY 14127 973/227-2221 716/662-2191 800/321-8080 Fax: 973/575-5553 Jesco, Inc. 1790 Route 38 495 Fishkill Avenue Lumberton, NJ 08048 Beacon, NY 12508 609/267-2020 845/831-1800 888/217-0600 800/724-0725 Fax: 609/261-8559 Fax: 908/821-1671

PENNSYLVANIA Doyle Equipment Co. Cranberry Township, PA 16066-0840 724/776-3636 Fax: 724/776-2450 Delmont, PA 15626 724/837-4500 Five Star Equipment, Inc. Dunmore, PA 18512 570/346-1701 Stroudsburg, PA 18360 570/424-1652 Waterford, PA 16441 814/796-2663 Williamsport, PA 17701 570/494-4030

Page 48 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Brooke Tyler IV Promoted to Customer Support Veep Tyler Equipment Corporation happy with their product, but they announced that Brooke Tyler IV has are also productive with their been named vice president of cusmachine.” tomer support for the company’s In his new position, Brooke IV East Longmeadow, Mass., and also will be involved with the comBerlin, Conn., branches. pany’s day-to-day operations and Among Brooke IV’s new responwill continue to streamline departsibilities will be to ensure customer ments to function more efficiently. satisfaction throughout the sales According to Brooke IV, among experience, including after-purthe many ways Tyler Equipment chase support. The company guarantees peace of mind after a announced that he has already customer has purchased a machine developed and implemented proceis the Volvo Caretrack system. dures and policies that will ensure a “Simply put, with Caretrack you continuous relationship with cuscan get the best out of your tomers for years to come. machine — today and in the long Brooke IV, a fourth-generation term. Caretrack is a telematic tool Tyler family member, said he will that monitors signs, locations and draw from his diverse and extensive machines vital service intervals,” experience at Tyler Equipment. he said. “I started from the ground up,” Fourth generation Brooke Tyler IV is now the vice presi“Our customers benefit not only said Brooke IV. “I’ve done every- dent of customer support for both the East Meadow, because our parts and service techthing from sweeping the shop Mass., and Berlin, Conn., branches. nicians receive continuous training, floors, mechanic and product they also emphasize rapid response instructor, salesman to account and keep a large parts inventory in manager and now vice president of customer expectations. Our customer support team is both branches so that customers can walk in support. My personal experiences in this experienced and goes the extra mile to listen and get what they need. On rare occasions, industry have helped me become knowl- and to learn from our customers. We know what isn’t available will be ordered and edgeable in our products, confident in our what they want and what they need. At the shipped overnight for next day delivery to abilities to foresee customers’ needs and end of the day, our customers are not only ensure customer satisfaction.”

“Economic activity continued to improve since the last report across all 12 Federal Reserve Districts, although many Districts described the pace of growth as ‘modest,’” the Fed reported June 9 in the latest Beige Book, a summary of informal soundings of business conditions conducted from mid-April to May 28. The districts are referred to by their headquarters cities. “Higher residential construction increased demand for construction equipment and materials in the Philadelphia, Richmond, Chicago, Dallas, and San Francisco districts. Residential real estate activity improved since the last report. Most districts noted an increase in home sales and construction prior to the April 30 deadline for the homebuyer tax credit, with contacts in many of these districts also indicating a corresponding slowing in activity in May. Tight credit, the elevated inventory of homes available for sale, and the ‘shadow inventory’ of foreclosed properties on banks’ balance sheets held back residential development in the New York, Cleveland, Atlanta, and Chicago districts. Commercial real estate activity generally remained weak. Office, industrial, and retail vacancy rates continued to drift upward in many districts putting downward pressure on rents. However, lower rents were said to have led to an increase in leasing activity in New York, Philadelphia, Richmond, Kansas City, Dallas, and San Francisco. The elevated inventory of existing properties for sale or rent continued to weigh on new private nonresidential construction. However, stronger industrial demand was noted in several districts. Public construction increased in Philadelphia, Cleveland, and Chicago, but slowed in Minneapolis. Real estate lending increased even though standards on these loans remained tighter than on other loans, particularly for commercial mortgages. Chicago noted that the

Kenneth

Simonson

Private Construction Shows Selected Strength, Beige Book, AGC Find; Jobs Slip Again secondary market for residential mortgages was beginning to improve, and private equity investment in commercial properties increased in Boston, Chicago, and Dallas. Steel prices in many districts moved higher, as did lumber but diesel fuel cost pressures eased in New York.” Contractors and owners at AGC’s Public/Private Industry Advisory Council meeting on June 11 reported mixed levels of construction activity. Most categories of private and state and local governmentfunded construction remain moribund. However, two leisure-industry owners reported a pickup in spending on hotel and entertainment facilities. Two contractors said data center construction has been strong. One reported several midsized new factories and major retooling in existing auto plants, but not enough to match pre-recession levels of manufacturing activity. The General Services Administration has now awarded more than $4 billion of contracts out of $5.55 billion to be committed under the 2009 Recovery Act, with another $1 billion of awards expected by Sept. 30. “Lack of availability of credit remains a major obstacle in the way of construction spending,” Econoplay.com reported on June 11, citing Jennifer

Riskus, manager of economics and research for the American Institute of Architects. “The AIA’s monthly billings index came in at 48.4 [in April], the best showing since the last time the index was above 50 (indicating expansion) in January 2008. Raw data from May, still being compiled, indicates that it won’t be the expansionary month that some had hoped for — and might even beckon a relapse. ‘We have panelists who say that things continue to improve. They’re even starting to hire more people — and projects are coming on line,’ Riskus said. ‘But they’re still being held back by the limited availability of credit. That’s really hurting. Projects that are ready to go can’t get financing.’” Econoplay.com also reported that Turner Construction’s quarterly measure of building construction costs “shows they continue to drop in the second quarter, but only marginally,” according to Turner Vice President Karl Almstead. “Construction costs were down about a half percentage point in the first quarter, and his preliminary [unpublished] second quarter number is down 0.13 percent, virtually flat.” Construction employment declined by 35,000 in May, seasonally adjusted, offsetting most of the increases the industry experienced in March (27,000)

Founded in 1922, Tyler Equipment has adapted its business to be even more customer focused. Despite challenging economic times, Tyler moved its Connecticut branch to Berlin, Conn., a more centralized location with three times the parts warehouse and four times the service space than its previous location. According to Tyler Equipment, the product support team has grown and will continue to grow as the company looks for qualified individuals to join its team. “We know that the success of our company is directly related to the success of our customers,” Brooke IV said. “Therefore, with our sustained goals of minimum downtime, improved uptime, our customers will see enhanced profitability by doing business with Tyler Equipment. Externally, we are not making enormous changes. We are polishing up what we do now to do what we have always done — only better. We are good at what we do … but we want to be the best.” For more information, visit www.tylerequipment.com. (Editor’s note: This article originally appeared in the New England state supplement.) CEG

and April (14,000), the Bureau of Labor Statistics (BLS) reported on June 4. All three of the monthly numbers represent very small changes relative to May employment of 5,591,000 workers. The rate of job loss, relative to a year earlier, has declined steadily from peaking at 17.4 percent in the year ending last September to 8.6 percent in the 12 months through May. One hopeful sign comes from architectural services employment. This series is not seasonally adjusted and is presented with a one-month delay. The April figure was up by 900 jobs (0.5 percent), compared to March, the first monthly gain in nearly two years. The construction unemployment rate was 20.1 percent, not seasonally adjusted, in May, the highest May rate since the series began in 1976 and more than double the all-industry rate. Seasonally adjusted average hourly earnings in construction totaled $25.20, up 1.8 percent from May 2009. The hiring rate in construction in April was 6.3 per 100 employees, seasonally adjusted, down from 7.3 in March but up from 5.5 in April 2009, BLS reported on June 8. The overall private-industry rate was 3.7 in March and April, 3.5 in April 2009. The rate of total separations in construction fell to 6.2 in April from 6.3 in March and 7.3 in April 2009. Employer costs for employee compensation averaged $27.73 in March for all private industry and $31.33 (13 percent more) for construction employers, BLS reported on June 9. Construction employers paid $21.67 in wages (vs. $19.58 for all private industry); $2.17 for health (vs. $2.08); $1.84 for social security and Medicare (vs. $1.64); $1.64 for retirement and savings (vs. $0.96); $1.40 for workers compensation (vs. $0.44); and $1.13 for paid leave (vs. $1.88). © Kenneth D. Simonson is chief economist of the Associated General Contractors of America.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 49

GET YOUR PARTS AND GET BACK TO WORK Ransome Cat offers a convenient option for ordering earthmoving and industrial engine parts on-line. It’s FREE, and all you need to do is register today at www.ransome.com. No Traffic. No Phones. No Lines. No Waiting.

CRANE E RENTALS Serving g the e Greaterr Hudson n Valley,, NY Y area a with

HYDRAULIC C TRUCK K & ALL L TERRAIN N CRANES

35 5 To o 275 5 Ton n Capacity VERY Y COMPETITIVE OPEN N SHOP P RATES KINGSTON,, NY

845-336-4100

- Review part schematics and part numbers through Cat’s Service Information System (SIS-Web) - Check real time parts availability - Review pricing - Examine remanufactured parts options - Select shipping options and delivery location - Save time

It’s as easy as.....Point, Click, Parts. www.ransome.com 1-877-RANSOME

Page 50 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

JLG Receives Order Valued at $85.7M From U.S. Army JLG Industries has received an order to build 492 All ucts and programs. “These machines will enable Army logis- ATLAS design and continues with a second generation Terrain Lifter Army System (ATLAS II) telescopic forklifts tics personnel to transport materials through a variety of ter- machine. The ATLAS II will be manufactured at JLG facilifor the U.S. Army. The order has a value of $85.7 million, rains.” ties in McConnellsburg, Pa. with units scheduled for delivery beginning in the fall of The ATLAS program began in 1998 with the original For more information, visit www.jlg.com. 2010. “This award is a testament to JLG’s ability to design, build and provide exceptional support for products supplied to the U.S. military,” said Craig Paylor, Oshkosh Corporation executive vice president and JLG president. “We will continue to deliver on our commitment to provide superior performance, rugged dependability and the highest level of after-sales support for the ATLAS II and all JLG products.” The newest in the JLG line of military telehandlers, the ATLAS II is designed with more versatility and improved load-handling capabilities. The ATLAS II can reach into trucks or shipping containers, lift loads over obstacles and pick up loads from both above and below grade. It has a maximum reach of 28 ft. (8.5 m) and lift loads of up to 10,000 lb, (4,536 kg). “Building on the rugged reputation of our military telehandlers, the JLG ATLAS II comes equipped with four-wheel drive, fourwheel steer and exceptional ground clearance,” said Denny Buterbaugh, JLG Industries vice president of government prod- JLG has received an order to build 492 All Terrain Lifter Army System telescopic forklifts for the U.S. Army.

Rick

Woodson

From the Bleachers So, whattaya doing this week? Going fishing? Camping? Climbing Mount Everest? Swimming the English Channel? Teeing it up somewhere? Working in the yard? Or, maybe just flopping in front of your TV? Well, if your agenda has nothing to do with golf, may I suggest you postpone whatever it is and beat it out to Locust Hill Country Club and see a piece of local, national and even (somewhat) international history. And if you just yawned and thought, “Huh? What’s this guy talking about?” then pay attention. Sure, the LPGA tournament has been at Locust Hill now for 33 years. And many of the greatest names in the history of women’s golf have played here. This year, though, Rochester will host the LPGA Championship presented by Wegmans. It will be the first women’s major championship played here since 1973, when the U.S. Open was held at the Country Club of Rochester. The first, by the way, was the 1953 Open, also at CCR. Even though the Wegman’s LPGA really has been somewhat of a major that wasn’t formally a major, this event, though, is significantly different. Our tournament, major or not, is one of the most popular among the players and one of the best attended —

roughly 90,000-plus for the week — on the Tour. Ticket sales for this tournament reportedly have increased dramatically. Women’s professional golf has never been at the level it is today. For a few years now, there has been female talent teeing off around the world, which was not the case way back when. The LPGA Championship isn’t a tournament any player will skip just so she can have some time off. There will be players at Locust Hill from just about any and every country that has a golf course, so the tournament will be somewhat of a historical event in Rochester, the golf capital of New York State. Doubt that? Then check out the numbers. First, the purse will be $2.25 million. At the Open here back in 1973, the total purse was $40,000. As this is written, there have been 288 media credentials issued to 66 media outlets, and tournament marketing director Kim Osur said she expects that number to pass 300 before tee times on June 24. Among them, Osur said, there will be writers and reporters here from Sweden, Japan, China, South Korea and the United Kingdom. Or as she put it, “We are definitely putting Rochester on the world map.” No kidding.

About the only thing missing from this year’s tournament at Locust Hill will be multiple double-digit red numbers — that is, players beating par to a pulp. Officials have added 150 yards to the length of the course, but some of the fairways are narrower and the rough is brutal. Miss the fairway and if there’s not a spotter following the shot, players might need a golf ball detector to find it. And when they do, hitting the green in regulation will be almost impossible. Throw in greens that are likely to be 12-plus on the Stimp Meter — that is, lightning fast — and those who don’t bring their A-game aren’t likely to be around for the weekend. Unfortunately for us golf nuts, Annika Sorenstam and Lorena Ochoa, both retired, will not be here. Still, though, the field will be loaded with talent from everywhere but Antarctica, including defending champion Anna Nordqvist. Jiyai Shin, who won the non-major Wegmans last year, also is listed as in the field but she had an appendectomy recently and it’s uncertain whether she’ll be here. The long-term question, though, is the future status of the tournament at Locust Hill. It has been one of the superstar events on the LPGA Tour for decades

now, thanks to Nancy Lopez back in 1978, when she won here for her record five consecutive victories. Who knows if it will become a major permanently, but it should. My guess is it depends on how the week goes, score-wise, players’ reaction, etc. Ticket sales for this tournament reportedly have increased dramatically and it wouldn’t surprise me if Rochester sets an LPGA record for tournament attendance, major or otherwise. One thing Osur emphasized is that the tournament is a fundraiser and “there’s no money to be made. The purpose is to keep kids in school and the money goes to United Way’s Graduation Is the Goal Fund.” It has always been a great event, but this year there will be electricity in the air as never before at Locust Hill. So, folks, get out to Locust and let’s show the world golf doesn’t get any better than right here in Rachacha. (Rick Woodson is a regular columnist for the “Rochester Business Journal” in Rochester, N.Y., and is the author of “Words of Woodson”, a collection of sports columns, available at www.authorhouse.com and www.thegolftee.net. Woodson’s email address is rwoodson@rochester.rr.com. )

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 51

ITS RESUME WAS ALREADY IMPRESSIVE– NOW THERE’S AN EVEN BETTER ANGLE.

The New KX161-3Angle Blade with Float Angle blade with float significantly increases productivity Advanced load sensing hydraulic system Tight tail swing – only 4 inches 11,118 lbs breakout force (bucket) 4,967 lbs breakout force (arm) Abele Tractor www.abeletractor.com

Albany, NY 12205 518/438-4444 518/438-5751

Admar Supply Company, Inc. Rochester, NY 14623 585/272-9390 Vestal, NY 13850 800/836-2367 607/798-0333 www.admarsupply.com

866/390-2367

Buffalo, NY 14217 Cherry Valley Tractor 716/873-8000 www.cherryvalleytractor.com 800/353-2367

E. Syracuse, NY 13057 315/433-5000 800/293-2367

Marlton, NJ 08053 856/983-0111

Eagle Power & Equipment Company www.EaglePE.com

Montgomeryville, PA 18936 215/699-5871 Eagle, PA 19480 610/458-7054 East PBE, Inc. Newington, CT 06111 860/665-7470

Erb & Henry Equip., Inc. Harter Equipment, Inc New Berlinville, PA 19545 Millstone Twp, NJ 08535 732/446-7600 610/367-2169 1-888-HARTER-1 Farm-Rite Inc. Shiloh, NJ 08353 800/752-6373 856/451-1368

Westchester Tractor Inc. www.wtractor.com

Abbotstown & Elizabethtown, PA 800/222-3373

Brewster, NY 10509 845/278-7766 845/278-4431

Marshall Machinery, Inc. Pine Bush Equipment Honesdale, PA 18431 Co, Inc. 570/729-7117

Calverton, NY 11933 631/284-3127

www.kubota.com EVERYTHING YOU VALUE

Messick’s www.messicks.com

www.pbeinc.com

Pine Bush, NY 12566 845/744-2006 Holmes, NY 12531 845/878-4004

Page 52 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Trucks & Trailers

SECTION

Load concentration relates to the design engineering assumption that is “behind” the trailer’s stated capacity.

Two trailers from two different manufacturers rated to carry 55 tons (50 t) may not be equal because of different engineering decisions.

Load Concentration Makes Difference in Trailer Capacity There is confusion in the marketplace about what trailer capacity really means. Questions such as: Why is there sometimes a significant price difference between two “identical” capacity trailers? One important factor that is often overlooked is the load concentration of the trailer deck. Load concentration relates to the design engineering assumption that is “behind” the trailer’s stated capacity. Of note: There is

no industry standard by which a trailer’s capacity is established. Each trailer manufacturer sets its own standard to determine the load concentration. Engineers begin by deciding what is most likely to be hauled on the trailer, which is expressed as a weight that is compared with the trailer’s deck length and wheelbase. Whether this theoretical load is a “block” or self-supporting

Engineers begin by deciding what is most likely to be hauled on the trailer, which is expressed as a weight that is compared with the trailer’s deck length and wheelbase.

load also is a factor. These engineering decisions determine the size and strength of the main beams, and most importantly the performance level of the finished trailer. For example, two trailers from two different manufacturers rated to carry 55 tons (50 t) may not be equal because of different engineering decisions. A trailer with a higher load concentration, designed to carry a block load over a shorter distance of the deck, will benefit a customer who wants a long-lasting trailer or a trailer that performs well, no matter what 55-ton load is carried. The trade-off is in the empty weight of the trailer. A trailer with a higher load concentration tends to be heavier because the beams are large. Higher strength steel (i.e. 130,000 psi yield steel) helps to keep the weight lower while maintaining the maximum load concentration. Why is this important? The fact is that a trailer designed to carry a 110,000 lb. (49,895 kg) load concentrated in 12 ft.6 in. (3.8 m), such as a bulldozer, has a much stronger deck than a trailer designed to carry a 110,000 lb. self-supporting load with two contact points that are 12 ft.-6 in. apart, such as a wheel loader. The trailer with concentrated load is approximately 14 percent stronger than the one designed for a self-supporting load. Yet, both are called 55-ton capacity trailers, and the price can be thousands of dollars different. The bottom line — Customers knowledgeable about trailer load concentration will ask the “right” questions and buy the trailer that will work best for their equipment. For more information, call 800/441-9880 or visit www.rogerstrailers.com.

Page 54 • June 23, 2010 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Rogers Completes 13-Axle Trailer for Houston Hauler Rogers completed an 80-ton (72.5 t) capacity, 13-axle trailer for a specialized hauling company in Houston, Texas. (The term 13-axle takes into account a 4-axle tractor). The trailer employs a “west coast style” suspension that distributes weight to the back six axles using a “rocker shaft” in the rear of the trailer. The air ride suspensions of the first three axles are attached to a sub-frame that “rocks” inside the rear frame; and it balances, like a teeter-totter, with the back three axles of the “stinger” or bogie. These suspensions have a special air-height adjustment system that is controlled by hand valves. Each axle of the main trailer is fitted with shut-off valves and chains. The trailer, stinger and jeep dolly all have Air Weigh electronic scales installed to measure individual axle loads. Rogers 80-ton (72.5 t) capacity “west coast style” modular trailer (3+3+3 axles) with 30 ft. L by 10 ft. W (9 by 3 m) platform deck. This trailer features a mechanical This design allows for the maximum axle capacity permitted by most states — 20,000 lb. (9,072 kg). detachable gooseneck with a 197-in. (500 cm) swing clearance. It uses the The platform deck is 30 ft. long and 10 ft. wide (9 by 3 m). 275/70R22.5 tires. This 80-ton capacity specialized Rogers “pin and paddle” connection method instead of the traditional Rogers “hook and shaft” connection. All of the structural Because of its modular design, the platform deck can be sub- trailer, including the 3-axle jeep dolly, is nearly 107 ft. (32.6 beams are fabricated of 130K psi steel to keep the trailer’s stituted with another deck style, or a future deck insert can be m) long. For more information, call 800/441-9880 or visit weight to a minimum. The total weight, including the jeep added to increase the deck length. It also is equipped with LED lights, three electronic back-up alarms and thirty-six www.rogerstrailers.com. dolly, is 64,900 lb. (29,438 kg).

Doosan MT41 Truck Combines Power, Stability, Traction The Doosan Moxy conditions such as deep MT41 articulated dump mud and water. Because truck offers high horsepowthey are fully encased in oil, er per ton of loaded weight, brake discs also last longer, a free-swinging rear tanreducing maintenance dem bogie and a special costs. articulation system for outThe comfortable, airstanding productivity and conditioned cabin features driving performance. an air suspension seat, low The MT41 is powered by noise and vibration levels a Tier III compliant, 444-hp and enhanced visibility, due (331 kW) Scania diesel to the sloping front hood. engine that provides a The “tip-tronic” gearshift power-to-weight ratio of allows the operator to run 6.38 hp (4.7 kW) per ton. It the truck in both automatic has a payload capacity of and manual gears for the 82,010 lbs. (37,199 kg). smoothest possible gearThe turning ring on the shifts and momentum. MT41 is located in front of The MT41 is powered by a Tier III compliant, 444-hp (331 kW) Scania diesel engine that provides a power-toThe wide-opening hood the articulation joint, ensur- weight ratio of 6.38 hp (4.7 kW) per ton. of the MT41 provides ing equal weight distribuaccess to the engine for tion to the front wheels at easy maintenance. In addiall times, even in maximum turns. This maintain ground contact at all times. Only for increased productivity, according to the tion, the cabin tilts for access to the transresults in easier steering and less front tire one differential lock/limited slip differen- manufacturer. mission and hydraulic components. A fully automatic transmission provides Because all electrical and air conditioning wear. The MT41 also features independent tial is required on the rear axles, resulting six forward speeds and three reverse. Top connections are at the rear of the cabin, front-wheel suspension for better traction in less driveline and tire wear. The sloping body ensures a low center speed is 32.9 mph (53 kmh) in high range they do not need to be disconnected in and superior operator comfort. Permanent 6-wheel drive provides trac- of gravity and excellent weight distribu- and 21.1 mph (34 kmh) in low range. order to tilt the cabin. Wet disk brakes provide more efficient tion in rough terrain. The free-swinging tion, further enhancing the stability of the For more information, visit rear tandem bogie allows the rear wheels to MT41 and providing fast and easy tipping braking under load, even in very adverse www.doosanequipment.com.

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • June 23, 2010 • Page 55

A.G.ALLEBACH

INC.

A.G. Allebach, Inc. PO Box 321 1690 Quarry Rd Kulpsville, PA 19443 215-368-7707 Fax: 215-368-9955

Empire Crane Company

Edward Ehrbar, Inc. www.ehrbar.com 4 Executive Plaza Yonkers, NY 10701 914-738-5100 601 Coates Ave. Holbrook, NY 631-563-7600

New York City, NY 718-626-3331 42 Kenosia Ave. Danbury, CT 203-743-0088

7021 Performance Drive Syracuse, NY 13220 315-458-4101 Fax 315-458-3169 www.empirecrane.com

Page 56 • June 23, 2010 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Kenworth T440/T470 Body Builder Manual Available

www.cherryvalleytractor.com

Kenworth Truck Company has produced the 2010 Kenworth T440/T470 body builder manual to help support body builder installations on the new T440 and T470 truck models. The Kenworth T440 in tractor and truck configurations is for regional haul, city pickup and delivery, municipal and vocational applications. The Kenworth T470 is for snowplow, dump, mixer, winch, refuse, and other heavy front-axle vocational and municipal applications requiring front frame extensions. The T470 offers full parent rail extensions, delivering maximum resistance to bending moment (RBM) from one end of the rail to the other, according to the manufacturer. The 2010 Kenworth T440/T470 body builder manual features detailed information on vehicle The 2010 Kenworth T440/T470 body builder manual dimensions, ride heights, features detailed information on vehicle dimensions, suspension layouts, ground ride heights, suspension layouts, ground and power and power take-off (PTO) take-off (PTO) clearances, and frame layouts available clearances, and frame lay- for both new models. outs available for both new models. The manual contains sections on safety and compliance, dimensions, body mounting, PACCAR PX-8 ratings are available up to exhaust and aftertreatment, frame modifica- 350 hp (261 kW) and 1,000 lb.-ft. of torque. Customers interested in additional power tions, electrical system and routings. The Kenworth T440 and T470 have a can select a 9-L, 2010 Cummins ISL engine gross vehicle rating (GVW) ranging from a rated from 345 to 380 hp (257 to 283 kW) heavy Class 7 vehicle at 33,000 lbs. (14,968 and 1,150 lb.-ft. to 1,300 lb.-ft. of torque. The 120-page Kenworth T440/T470 kg) up to a light Class 8 truck at 68,000 lbs. (30,844 kg). Both the T440 and T470 are body builder manual is useful when speciavailable with 12,000 to 22,000 lb. (5,443 to fying a vehicle, especially when the body 9,979 kg) front axles, 21,000 to 26,000 lb. builder is involved in the vehicle definition (952 to 11,793 kg) single rear axles, and and ordering process. Professional body 40,000 to 46,000 lb. (18,143 to 20,865 kg) builders often provide valuable information that may help reduce the cost of the body tandem rear axles. The T440 and T470 are standard with the installation. For more information, visit 2010 PACCAR PX-8 engine at 260 hp (194 kW) with 660 lb.-ft. of torque. Additional www.kenworth.com.

Keep Up With All the Industry News Subscribe to

Construction Equipment Guide Today! Toll Free

800/523-2200

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • June 23, 2010 • Page 57

(800) 877-5854 • (802) 763-2585 Exit 3 off I-89 • South Royalton, VT

www.luckystrailers.com 28 Jasper Mine Road • Colchester, VT 05446 NEW LOCATION! New Talbert 55 ton low beds, 26' deck, dropside or level deck, air ride, lift axle, 2 king pin setings and much more.

New Landoll 425 sliding axle trailer, 20K winch, air ride, apitong wood deck.

Lucky’s is now a Tremcar Dealer for the Northeast. Call for Customer Quotes.

(802) 893-6565 • (877) 201-9993 Fax: (802) 893-6604 (2) 2005 Transcraft TL2000, Air Ride, Spread Slide, 48’x102”, Headboard, Winch Track, Steel Wheels

Par ts In Stock For All Makes & Models of Trailers

New Talbert 55 Ton Dropside, 26’ Well, Air Ride, Lift Axle, 4th Axle Connections

(5) Used Walking Floors in Stock, Various Specifications, Call for Details

New Landoll 435, 50'x102", Air Ride, 20K Winch, Wireless Remote Control, Aluminum Outer Wheels.

New Talbert Nitro Stinger. Call for Details & Pricing

1993 Peterbilt 379, Cat Engine, 425 HP, 477,809 Miles, 15 Speed, 46000 Rear, 20000 Pusher, 11R24.5 (2000) HD 15’ Dump Bodyx48x60

Trucks & Heavy Equipment Also Available

1999 Talbert 51 Ton, Air Ride, Lift Axle, 24’ Well

1986 Kenworth C520, 315 Cummins, Spring Ride, Fruehauf Body.

1999 Rogers 50 Ton, Call for Details

&&&&&&&&&&&&&&&&&&&&&&

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

BRANDON Truck Body Depot We Are Overstocked!!!

Clearance Sale Financing & Leasing Available

We Install Full Line of Accessories

EXCESSIVE ENERGY CONSUMPTION This Energy Hog was last seen lurking in homes without enough insulation and homes with older heating and air-conditioning systems. He’s responsible for causing high energy bills in homes across the U.S. To protect your home, install a programmable thermostat to save as much as 10% a year on heating and cooling bills. Adding insulation is the best protection from this fugitive.

If you have any information on this case, or would like to learn more about a Federal Tax Credit as a reward, go to www.energyhog.org.

Truck Body Specialists LLC

$200 OFF All Cash & Carry Truck Bodies!!!

$250 OFF All Truck Body Installations!!! 87 81

Rt. 12 South Canal Street • PO Box 920 • Oxford, NY 13830

1-866-237-9885

www.chenangotruck.com chenangotruck@frontiernet.net

Syracuse

Utica

Oxford CHENANGO

Ithaca

Albany

Oneonta 88

Binghamton

87 84

Page 58 • June 23, 2010 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Brake Plan Helps Truck Operators Better Prepare for Winter

Highway agencies spray magnesium chloride and calcium chloride on pavement in advance of a coming storm or they mix the chemicals with salt and sand to make snow removal easier. These corrosive chemicals can penetrate truck components like brakes.

Each winter, local, state, and provincial highway agencies use liquid de-icers in their battle against snow and ice in an effort to save money and to reduce the impact of sand on air and groundwater quality. The highway agencies spray magnesium chloride and calcium chloride on pavement in advance of a coming storm or they mix the chemicals with salt and sand. “Since these chemicals don’t readily evaporate and are highly soluble in water, chemical de-icers stick around and prevent ice from forming on the roadways, making snow removal easier,” said Jeff Sass, general marketing manager of Paccar Parts. “But those same qualities make it easier for the corrosive chemicals to penetrate truck components like brakes.” “Roadleveler offers new and remanufactured brake components that can last longer and perform more reliably under these corrosive conditions,” Sass said. “In order to eliminate uneven wear allowing for greater stopping power and longer life, each Roadleveler brake shoe is coined,” Sass added.

Coining is a form of precision stamping where each Roadleveler brake shoe is stamped like a minted coin in a 1,000-ton hydraulic press. This ensures that the radius and depth of the shoe table is manufactured to OEM tolerances.” Coining also eliminates the gaps between the shoe table and the friction material to prevent water and road chemical de-icers from seeping behind the friction material, Sass said. “A special anti-corrosion hydraplex enamel coating that’s first applied through full immersion sets the Roadleveler product apart,” Sass said. This full immersion doesn’t leave surfaces exposed to possible environmental contaminants like chemical de-icers. Then the enamel coating is baked on at 200 degrees for several cycles to ensure proper adhesion, rather than spraying on a waterbased coating that’s air dried and prone to rust jacking. “Rust jacking, or the build up of rust behind the friction material on brake shoes,

In order to eliminate uneven wear allowing for greater stopping power and longer life, each Roadleveler brake shoe is coined, ensuring that the radius and depth of the shoe table is manufactured to OEM tolerances.

can cause brake linings to lift and crack, a leading cause of out-of-service violations during brake inspections,” Sass added. According to the Commercial Vehicle Safety Alliance (CVSA), one out of every three trucks inspected during last year’s annual brake inspection was sidelined due to defects with brakes or with their components or adjustments. “Truck operators can be better prepared for the upcoming winter by having Roadleveler brake components installed,” Sass said.

About Roadleveler Roadleveler is a licensed Paccar brand of precision fit replacement parts including brake shoes and hardware kits, ride-control and steering components, including shock absorbers. Roadleveler products are sold exclusively in North America. All Roadleveler brake products meet or exceed Federal Motor Vehicle Safety Standard 121. Paccar Parts distributes Roadleveler brake products exclusively through Kenworth and Peterbilt dealers in the United States and Canada. For more information, visit www.RoadLevelertruckparts.com.

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • June 23, 2010 • Page 59

Warner Tractor and Equipment Inc.

Asphalt Care Equipment & Supply

Douglas Equipment & Supply Company

2765 Galloway Rd. Bensalem, PA 19020 215-639-9800 Fax: 215-639-9802 www.asphaltcare.com

7100 Kriedler Rd. York, PA 17403 717-428-1517 www.douglasequip.com

H.A. DeHart & Son 311 Crown Point Rd. Thorofare, NJ 08086 856-845-2800 www.hadehart.com

Warner Tractor & Equipment, Inc. Rt. 3 Box 460 Troy, PA 16947 570-297-2141 www.warnertractor.com

Page 60 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 61

CHADWICK-BaROSS Westbrook, ME • 207/854-8411 Bangor, ME • 207/942-4838 Caribou, ME • 207/498-2547 Concord, NH • 603/224-4063

603/224-4063

MALVESE EQUIPMENT CO., INC. Hicksville, NY • 516/681-7600 Riverhead, NY • 631/369-1147

HIGHWAY EQUIPMENT & SUPPLY CO. (HESCO) Harrisburg, PA • 717/564-3031 Drums, PA • 570/788-1127 Ephrata, PA • 717/859-3132 Lockhaven, PA • 570/769-1070

VANTAGE EQUIPMENT Latham, NY • 518/220-9500 Battavia, NY • 585/344-1931 Syracuse, NY • 315/437-2611

MCCLUNG-LOGAN EQUIPMENT COMPANY, INC Baltimore, MD • 410/242-6500 Manassas, VA • 703/393-7344 Winchester, VA • 540/722-3700 Chesapeake • 757/485-3314 Richmond • 804/266-0000 Roanoke, VA • 540/989-3750 Wise, VA • 276/328-8027 Bridgeville, DE • 800/638-6012

WOODCO MACHINERY Woburn, MA • 781/935-3377 www.woodcomachinery.com

We’re built around you – for your success. We start with you in building the world’s most durable, productive equipment. We find out what it takes for you to do your job faster and more economically. Then we build it into every one of our machines. That’s why your cab is more comfortable. Your engine does more on less fuel. There’s more uptime between maintenance – and servicing is easier. Let’s work. Visit your local Volvo dealer today to build your next success. www.volvoce.com/na

TYLER EQUIPMENT CORP. East Longmeadow, MA 413/525-6351 Berlin, CT • 860/356-0840

RUDD EQUIPMENT COMPANY Pittsburgh, PA • 412/741-1731 Clearfield, PA • 814/765-8500 Charleston, WV • 304/755-7788

PENN JERSEY PENN JERSEY MACHINERY Deptford NJ • 856/227-6400 Somerville NJ • 908/218-1919 Lionville PA • 610/363-9200 Staten Island, NY 718/889-0105

Page 60 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 61

CHADWICK-BaROSS Westbrook, ME • 207/854-8411 Bangor, ME • 207/942-4838 Caribou, ME • 207/498-2547 Concord, NH • 603/224-4063

603/224-4063

MALVESE EQUIPMENT CO., INC. Hicksville, NY • 516/681-7600 Riverhead, NY • 631/369-1147

HIGHWAY EQUIPMENT & SUPPLY CO. (HESCO) Harrisburg, PA • 717/564-3031 Drums, PA • 570/788-1127 Ephrata, PA • 717/859-3132 Lockhaven, PA • 570/769-1070

VANTAGE EQUIPMENT Latham, NY • 518/220-9500 Battavia, NY • 585/344-1931 Syracuse, NY • 315/437-2611

WOODCO MACHINERY Woburn, MA • 781/935-3377 www.woodcomachinery.com

TYLER EQUIPMENT CORP. East Longmeadow, MA 413/525-6351 Berlin, CT • 860/356-0840

RUDD EQUIPMENT COMPANY Pittsburgh, PA • 412/741-1731 Clearfield, PA • 814/765-8500 Charleston, WV • 304/755-7788

PENN JERSEY PENN JERSEY MACHINERY Deptford NJ • 856/227-6400 Somerville NJ • 908/218-1919 Lionville PA • 610/363-9200 Staten Island, NY 718/889-0105

Page 62 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Crushing, Screening & Recycling Section Wrecking Corporation of America: Demolition by Number

Wrecking Corp. used five Hitachi excavators for the D.C. Housing Authority job — a ZX270, two ZX330s, a ZX450 and a long-reach ZX850.

The specialized ZX850 with an ultrahigh telescopic boom that reaches 130 ft. is used for selective demolition as necessary.

“For 30 years, we’ve provided precisely engineered solutions for either demolition or historic preservation,” said Terry Anderson, executive vice president, Wrecking Corporation of America. “Working the Washington, D.C., market means we have to do everything just right. We have to bring down solidly built structures without damaging the surrounding occupied buildings. And preserving certain parts of historic façades requires our utmost attention to get it right.” “This project is the demolition of three 12-story apartment towers for an entity of the D.C. Housing Authority,” explained Anderson. “Each of the towers has a footprint of about 60 by 200

feet. We’re razing them and crushing the resulting 30,000 cubic yards of concrete. We’ll use most of the crushed concrete to regrade the site, then we’ll add topsoil and plant grass. Eventually, the Authority will probably build housing on the site.” The company is paying special attention to two of the three towers because they provide reinforcement to newer apartments located about 20 ft. (6 m) away. “Working with consulting engineers, we developed a plan for providing both temporary and permanent reinforcement to the neighboring properties,” see DEMOLITION page 66

Terry Anderson, executive vice president, Wrecking Corporation of America.

Page 64 • June 23, 2010 • www.constructionequipmentguide.com • Recycing Section • Construction Equipment Guide

Using a mobile conveyor to stockpile material has many benefits: • Reduced operating costs (fuel and labor) as the loader operator does not need to be continuously moving material from under the conveyor (sometimes the need for a second loader is totally removed) • Greater operating efficiency - less rehandling of product and more focus on feeding the processing plant and loading trucks • Natural stockpile capacity increased • No contamination of product - often caused through re-handling • More environmentally friendly than a loader • Easy to move around work site

There are many reasons why more companies are buying mobile conveyors from Anaconda Conveyors USA: • Exceptional build quality - robust and reliable with features designed with the end user in mind • Excellent value for money - typical payback period of less than 6 months! • Competitively priced against all other conveyor manufacturers • Quick set up time on all products • Extensive range offering conveyors capable of handling up to 880 tons per hour • Dedicated customer support

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 23, 2010 • Page 65

Page 66 • June 23, 2010 • www.constructionequipmentguide.com • Recycing Section • Construction Equipment Guide

Wrecking Corp. Undaunted by Challenging D.C. Job Sites DEMOLITION from page 60

said Anderson. “Typically, we perform a comprehensive preconstruction analysis of the project. This helps us determine if we need additional engineering and consulting services to ensure the project can be fast-tracked skillfully, safely, and efficiently.” To help execute its carefully made plans, Wrecking Corp. depends on its orange fleet. On this particular job there were five Hitachi excavators: a ZX270, two ZX330s, a ZX450, and a long-reach ZX850 taking care of the high work. Anderson explained, “We like the Hitachi excavators. We’ve owned other brands, but I think Hitachi has the whole package. This is a severe-duty business, and we expect equipment to get really beat-up. “We do everything we can to extend the life of our machines. We put on rock guards and steel plate on the underside, install steel cages around operator cabs, and add extra filtration. We also aggressively service and maintain our fleet. Still, where a pump might last 12,000 hours in a dirt application, we do well to get 6,000 hours. “Overall, our Hitachi machines hold up better. They get the job done on a very cost-effective basis, they’re competitively priced, they get better fuel economy, and they’re tough.” Wrecking Corp uses its Hitachi fleet to move, sort, and

Most of the crushed concrete is used to regrade the site, then topsoil is added and grass planted.

Demolishing the Waterfront Mall, a 1.2-million-sq. ft. structure, required a lot of steel to be sheared and concrete to be pulverized.

rough-crush demolished concrete. The concrete is then loaded into a C10 Extec jaw crusher. Every excavator is equipped with a thumb-equipped rock bucket. Some of the ZX450s are fitted with shears that tear out and cut steel beams. The ZX850 is used for selective high demolition. Old School When It Works “We have a tendency to go ‘old school’when it works and high-tech when we need to be especially precise,” noted Anderson. “On this project, the interiors were stripped to bare concrete by hand and materials moved out with the help of small skid steer loaders. The debris was then hauled to a local C&D reclamation site.” The third tower was far enough from neighboring buildings to be razed with a 90-ton (81.6 t) truck crane and a 6,000-lb. (2,722 kg) ball. see DEMOLITION page 70

Wrecking Corp. uses its Hitachi fleet to move, sort and rough-crush demolished concrete.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 23, 2010 • Page 67

High Productivity – Low Operating Costs SENNEBOGEN green line material handling machines make your competitors “green with envy” TYLER EQUIPMENT CORP.

251 Shaker Road East Longmeadow, MA 01028 413-525-6351 FAX: 413-525-5909 1980 Berlin Turnpike Berlin, CT 06037 860-356-0840 FAX:860-356-0848 www.tylerequipment.com

C.N. WOOD CO., INC. 200 Merrimac Street Woburn, MA 01801 781-935-1919 FAX: 781-937-9809 140 Wales Avenue Avon, MA 02322 508-584-8484 FAX: 508-584-8514 102 State Road Whately, MA 01093 413-665-7009 FAX: 413-665-7277 60 Shun Pike Road Johnston, RI 02919 401-942-9191 FAX: 401-942-9266 www.cn-wood.com

TRACEY ROAD EQUIPMENT, INC. 6803 Manlius Center Road PO Box 489 East Syracuse, NY 13057 315-437-1471 800-872-2390 1523 Route 11 North Kirkwood, NY 13795 607-775-5010 800-370-9488 FAX: 607-775-5104 300 Middle Road. Henrietta, NY 14467 585-334-5120 866-950-6210 FAX: 585-334-5127

19598 Cady Road (Exit 44 - Watertown Center - off I-81) Adams Center, NY 13606 315-788-0200 888-335-0200 FAX: 315-788-3006 115 Railroad Ave. Ext. PO Box 5306 Albany, NY 12205-0306 518-438-1100 800-692-9669 FAX: 518-438-4430

GIBSON MACHINERY CORPORATE ADDRESS: 181 Oakleaf Oval Oakwood Village, OH 44146 440-439-4000 Fax: 440-439-5764 WESTERN PENNSYLVANIA: 4986 Grand Avenue Neville Island, PA 15225 800-843-1205 Fax: 440-439-5764 www.gibsonmachinery.com

MIDLANTIC MACHINERY INC. 1261 Highway 315 Wilkes-Barre, PA 570-824-9891 Fax: 570-824-0268 Harrisburg, PA 717-652-3190 Fax: 717-652-6405

ATLANTIC EQUIPMENT & SUPPLY 2201 Mingee Drive Hampton, VA 23661 757-827-4778 800-325-0461 www.aeandsupply.com

BINDER MACHINERY CO.

2820 Hamilton Blvd. South Plainfield, NJ 07080 908-561-9000 800-562-0012 Fax: 908-753-1644 201 North Route 73 Winslow Township, NJ 08095 856-767-5900 800-562-0012 Fax: 856-768-5643

LESLIE EQUIPMENT 136 Clifftop Drive Beaver, WV 25813 304-255-1525 Fax: 304-252-9806 6248 Webster Rd. Cowen, WV 26206 304-226-3299 Fax: 304-226-3067 19 Goff Crossing Drive Cross Lanes, WV 25313 304-204-1818 Fax: 304-204-1811 284 Van Kirk Drive Fairmont, WV 26555 304-534-5454 Fax: 304-534-5888 Route 33 West Norton, WV 26285 304-636-6421 Fax: 304-636-3516

Page 68 • June 23, 2010 • www.constructionequipmentguide.com • Recycing Section • Construction Equipment Guide

Crush it. Screen it.

Introducing the new Powerscreen® Warrior 2400, specially designed for large scale operators in the quarrying and mining sectors. Featuring a heavy duty incline screen, the Warrior 2400 is capable of handling large feed sizes, lending it to screening, scalping, 2 or 3 way splitting and stockpiling a range of materials. The Warrior 2400 has an output potential of up to 771 US tons per hour while remaining simple to operate, maintain and transport. Powerscreen combines global resources, decades of experience and in-depth industry knowledge to deliver a complete range of crushers, screens and wash plants to match your needs. You can depend on your Powerscreen dealer for knowledgeable advice, skilled installation and responsive local support. Together, we help you become more productive and cost efﬁcient. Powerscreen 11001 Electron Drive Louisville, Kentucky 40299 Tel: +1 502 736 5233 Email: gerald.mccarthy@powerscreen.com Web: www.powerscreen.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 23, 2010 • Page 69

Construction Equipment Co. 18650 SW Pacific Highway Tualatin, Oregon 97062 ID[ www.ceccrushers.com

The PRODUCT you want.... The PRODUCTION you need.... 102x115 Track Mounted Impactor

6x16 Screen-It

Crushing Screening Washing Conveyors 6x16 Wash Plant

26x42 Track Mounted Jaw Crusher

....At a PRICE you can afford W.I. CLARK CO.

6640 State Rte 5 Nelliston, NY 518/993-2100 New York

2550 W. Cumberland Street Lebanon, PA 17042 717/273-2616 Fax: 717/273-5928 Sellersville, PA • 215/258-5700 Lewisberry, PA • 717/938-6568 Bethlehem, PA • 610/867-4657 Pennsylvania

30 Barnes Industrial Park Rd. Wallingford, CT 06492 203/265-6781 Fax: 203/294-1216

15 Station Road Brookfield, CT 06804 203/775-1203 Fax: 203/740-2579 www.wiclark.com 80 Pratt Road Plainfield, CT 06374 860/642-3500 • 860/642-3507

Connecticut

Page 70 • June 23, 2010 • www.constructionequipmentguide.com • Recycing Section • Construction Equipment Guide

INCREASE RAP USAGE

D.C. Firm Votes for Hitachi Equipment

Ephrata, PA (717) 625-2800

Dismantling, cataloging and crating historic masonry façades for reuse is one of the services Wrecking Corp. provides. DEMOLITION from page 66

Recycle RAP for profit with a ProSizer! Fractionating or Sizing RAP material back to its original size will allow higher RAP usage and replacement of virgin aggregates. RAP fines have up to twice as much AC content as ½” x ¼” and more than four times as much ¾” x ½”. Start realizing serious material savings and fast payback by using a ProSizer, a closed circuit mobile plant

featuring a double deck PEP Vari-Vibe® high frequency screen and HSI crusher .

Pennsylvania, Delaware & Maryland Todd Weikel - (717) 773-5825 • todd@keystonecrushers.com

“Nothing’s cheaper than gravity, so if you drop that ball enough times, the building will indeed come down.” The remaining two towers require substantially more finesse. They will be selectively demolished by hand with jackhammers and the ZX850, which is equipped with an ultrahigh-reach telescoping boom that goes up 130 ft. (39.6 m). A universal processor tops the end. The ZX850 is used to surgically remove structures from each building. “It’s a controlled process that lets us reach and remove material without compromising a building’s structural integrity or damaging adjacent structures,” according to Anderson. Dealer Availability “Since we know that we’re going to tear up our Hitachi excavators, it’s important to have an attentive dealer,” stated Anderson. “We’re going to need repair work, and we’ll need parts. We used to use another brand of excavator, and when it was down the dealer never seemed to have what it needed in stock. Then the solution was to ship it halfway around the world. We got tired of that. Our Hitachi dealer either has the part or can get it from a U.S-based regional depot nearly overnight. Their mechanics are good, and they come when we need them. Downtime is very expensive in this business, and with Hitachi, we don’t have much.” This story was reprinted with permission from Hitachi Breakout Magazine, First Issue 2010.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 23, 2010 • Page 71

EFM Logo - 2C - Black & PMS 876 Bronze

All manufacturer names, numbers, symbols and descriptions are used for reference purposes only. All parts are manufactured by, for and warranted by EXCEL FOUNDRY and MACHINE, INC. and are not manufactured by, purchased from or warranted by the original equipment manufacturer.

Page 72 • June 23, 2010 • www.constructionequipmentguide.com • Recycing Section • Construction Equipment Guide

ANYONE CAN CAN CLAIM CLAIM IT. IT. OUR OUR DEALERS DEALERS PROVE PROVE IT. IT. ANYONE

” Disc-Style Chipper

Drum-Style Chipper

The 12” capacity Model 1090XP from Bandit is the compact, durable solution to your chipping needs. Features the patented Power Slot system.

MODEL 1590XP

MODEL 280XP

Disc-Style Chipper

Bandit’s 18” capacity disc chippers are perfect for whole tree take downs. Also available as a self-propelled unit.

”

Pound for pound and dollar for dollar, there is not a tougher, more productive chipper available in this size range. Features a 12.5” x 19” opening.

” 12

DRUM-STYLE

MODEL 1090XP

MODEL 250XP

Drum-Style Chipper

MODEL 1890XP

Drum-Style Chipper

The 17” capacity Model 1590XP features an This rugged, high production unit will easily 19.5” x 20.5” chipper opening for breaking down dispose of whole trees. Features a 26” x 20.5” limby materials. Engine options up to 142-hp. opening and engine options up to 250-hp.

BRUSH BANDIT® CHIPPERS

Disc-Style Chipper

This compact unit features a wide 6” x 12” chipper opening, twice the size of competitive units! Easily keeps your crew busy feeding it.

MODEL 65XP

DISC-STYLE

”

BANDIT EQUIPMENT PERFORMS.

Our dealers perform. We didn’t get to where we are today on our own. We’ve worked hard to develop an extensive worldwide dealer network to bring ﬁrst class sales and service support to our customer’s back yard. And in turn, our dealers have worked hard for us. That’s why we continue to be an industry leader for all your chipping and grinding needs. Contact any of our authorized dealers below to learn more about the equipment that works for you!

MODERN GROUP www.moderngroup.com MODERN EQUIPMENT 1325 Highway 34 • Farmingdale, NJ SALES1-800-866-0156 & RENTAL CO.

http://www.moderngroup.com

6352 Chapmans Road • Allentown, PA 18106 1325 Highway 34 • Farmingdale, NJ 1-800-459-4659

MODEL HB20XP

Handlebar Stumper

MODEL 2100XP

MODEL 2800XP

Self-Propelled Stumper

MODEL 3200XP

Towable Stumper

A high-production towable stump grinder featuring a 32” diameter by 1-1/2” thick cutting wheel. A great buy for the high production stump grinding contractor.

”

Compact enough to ﬁt through a 36” gate. Features a hydrostatic cutter wheel drive and a 2- or 4-wheel drive undercarriage.

”

The unique center-pivot design lets you swing the handlebars from side-to-side to grind the stump, leaving the undercarriage stationary.

Self-Propelled Stumper

Very compact and economical; this backyard stumper is available with 2- or 4-wheel drive. Now available with 44.2-hp engine.

MODEL 2900XP

Track Stumper

Equipped with a powerful hydrostatic cutting wheel and an expandable/retractable rubbertracked undercarriage. Now with GREENTEETH® technology and 84.5- to 114-hp engine options.

MODEL 3400XP

Track Stumper

Features a Caterpillar® rubber tracked undercarriage, radio remote control, and a wide track base with plenty of power.

BANDIT STUMP GRINDERS

1-800-866-0156

LOG ON TO VIEW OUR ENTIRE PRODUCT LINE VIDEO LIBRARY! WWW.BANDITCHIPPERS.COM

201 W. Church Rd. Suite 500 • King of Prussia, PA ••• 1-800-445-4381

RBR EQUIPMENT

24 Brookside Drive • Wilmington, DE 19804 http://www.rbrequipment.com 1-800-227-2525

1631 Otisco Valley Road • Marietta, NY ••• 1-315-558-4367

RBR EQUIPMENT •••

www.rbrequipment.com 1631 Otisco Valley Road • Marietta, NY TYLER EQUIPMENT 1-315-558-4367 http://www.tylerequipment.com

East Longmeadow, MA •••

1-413-525-6351 TYLER EQUIPMENT www.tylerequipment.com Prospect, CT MA East Longmeadow, 1-203-758-3925 1-413-525-6351 Berlin, • • •CT 1-203-509-0967

WESTCHESTER ••• TRACTOR, INC.

WESTCHESTER TRACTOR, INC. http://www.wtractor.com www.wtractor.com 60 International Blvd • Brewster, NY 60 International Blvd., Brewster, NY 1-845-278-7766 1-845-278-7766

BANDIT INDUSTRIES, INC. CORPORATE HEADQUARTERS

800-952-0178 • 989-561-2270 sales@banditchippers.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 23, 2010 • Page 73

Page 74 • June 23, 2010 • www.constructionequipmentguide.com • Recycing Section • Construction Equipment Guide

Grasan’s KRH1315 Plant Combines Portability, Fast Setup Grasan’s road-portable KRH1315 impact crusher plant combines high production capacity with versatile over-theroad portability and fast setup on the job. The plant can crush concrete and asphalt rubble and C&D debris at rates up to 400 tons (363 t) per hour and shot limestone at up to 500 tph (453 t). Total plant weight is 127,500 lb. (57,833 kg) and choice of axle configurations is available to meet various highway regulations. The skid-on, skid-off hopper transfers from flatbed trailer to crusher chassis in about 30 minutes with no crane assist. Four independent hydraulic legs provide total operational support and have infinite height and leveling adjustments for fast setup and solid footing. The crusher is the Hazemag 1315 APPH primary impact crusher designed especially for recycling. The impactor features a fully automatic, hydraulic cylinder system that provides 15 percent to 20 percent greater production capacity than a same-size impactor with standard controls. It also has smoother operation and produces more uniform products. The unit is available with diesel or electric power. For more information, call 419/526-4440 or visit www.grasan.com.

Grasan’s KRH1315 impact crusher plant can crush concrete and asphalt rubble and C&D debris at rates up to 400 tons (363 t) per hour and shot limestone at up to 500 tph (453 t).

Peterson’s 4310 Drum Chipper Features C18 Cat Engine The 4310 drum chipper is the latest in a long line of chipping and grinding machines produced by Peterson. The 4310 drum chipper is suited for high volume biomass producers who have a wide variety of feed material, from logs up to 26 in. (66 cm) in diameter, to brush and small feed stock. The 4310 is powered by a 765 hp (570 kW) C18 Caterpillar engine. At 52,000 lbs. (23,586 kg), the 4310 was designed for operations requiring high production and tracks for frequent moves between jobs. The chipper utilizes a 36 in. (91.4 cm) diameter by 40 in. (10.2 cm) wide drum. Other key features include a sloped feed deck for ease of feeding the chipper and wear resistant AR 400 wear surfaces on the drum pockets and shell. Optional material sizing grates minimize oversize twigs and branches in the chips, and an optional chip accelerator helps with loading. Traditional babbit type knife The 4310 drum chipper is suited for high volume biomass producers who have a wide variety of feed systems are standard equipment. material, from logs up to 26 in. (66 cm) in diameter, to brush and small feed stock.

Chip length can be changed from .5 to 1 in. (1.3 to 2.5 cm) by adjusting knife extension and feed speed. A top loading or an end loading spout is available depending on the application. The 4310’s new generation of controls includes Peterson’s highproduction adaptive control system. The new control panel provides self-diagnosis for faulty sensors and open circuits. Fault indicators make troubleshooting easy. The 4310 control panel features an LCD display that provides the operator the complete engine and system parameters to simplify setup and efficiently operate the machine, according to the manufacturer. Peterson specializes in developing delivery and processing equipment that turns low-grade organic materials into high value products. Since 1982 Peterson has manufactured equipment for customers in more than 25 countries. For more information, visit www.petersoncorp.com.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 23, 2010 • Page 75

Get the Big Picture Whether you are looking for portable track-mounted jaws, trackmounted cones or track-mounted screeners, Whitney & Son in partnership with Metso has the products and experience you are looking for. Since 1964, we have been working hard for the right to call ourselves experts in the field.

Serving all of New England Committed to Customer Support Since 1964! 95 Kelley Avenue Fitchburg, MA 04120

Aggregate producers and contract crushers alike call Whitney & Son for products like the LT106 and LT200 crusher. The only track-mounted crusher on the market that is road legal.

800-245-5472

Exclusive New England dealer for Metso, excluding mobile screeners.

info@whitneyandson.com

Page 76 â&#x20AC;˘ June 23, 2010 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ Recycing Section â&#x20AC;˘ Construction Equipment Guide

Builtrite Skid Steer Grapple Enhances Machine Capability

The Builtrite skid steer grapple lifts a boulder while attached to a New Holland skid steer.

Blue Chip Investment <Zi i]Z bVm^bjb gZijgc dc ndjg ^ckZhibZci lî] V EZiZghdc )(%% 9gjb 8]êeZg Lî] i]Z XVeVWâîn id egdYjXZ V Âś & hôZY X]ê! i]Z )(%% XVc bZZi ndjg W^dbVhh cZZYh fj^Xàn VcY Z[Ă&#x192;X^Zcian Vi V adlZg Xdhi eZg idc >cXgZVhZ ndjg eVnWVX` lî] dei^dcVa hô^c\ \gViZh i]Vi ZmeVcY ndjg bVg`Zi dei^dch# ?jhi dcZ add` Vi V EZiZghdc )(%% XVc h]dl ndj l]n lZ WjâY i]Z bdhi ^ccdkVi^kZ W^dbVhh egdXZhh^c\ bVX]^cZh ^c i]Z bVg`Zi# ;dg cZVgan i]^gin nZVgh! EZiZghdcÂťh ViiZci^dc id YZiVâ VcY dWhZhh^dc lî] XgZVi^c\ i]Z ]^\]Zhi fjVaîn! ]^\]Zhi kdajbZ egdYjX^c\ bVX]^cZh bV`Zh i]Z )(%% Ygjb X]êeZg V hjgZ ^ckZhibZci# LVci id hZZ l]Vi V EZiZghdc )(%% XVc Yd4 8dciVXi dcZ d[ djg YZVaZgh a^hiZY WZadl dg k^hî jh Vi lll#eZiZghdcXdge#Xdb# AZi EZiZghdc egdkZ id ndj l]n i]Z WZhi eVgi d[ i]Z igZZ ^h i]Z X]ê

6aWVc IgVXidg

7Vggn :fj^ebZci

8aZkZaVcY 7gdi]Zgh

8dkZg^c\ BVgnaVcY 9ZaVlVgZ

8dkZg^c\ CZl :c\aVcY :VhiZgc CN

8dkZg^c\ EZcchnakVc^V LZhi K^g\^c^V

)&% +-+",,,,

*%- .)."%%%*

-&) '(,"*&(' Zmi# *&%&

-%%"'+."+*'% Â&#x2122; lll#eZiZghdcXdge#Xdb Â&#x2122; ED 7DM )%).% Â&#x2122; :j\ZcZ! DG .,)%)

A Bobcat 773 clears timber with the help of the Builtrite skid steer grapple.

The Builtrite skid steer grapple enhances production in landscaping applications by being able to precisely pick and place boulders, logs, concrete barriers, etc. As a hanging attachment, operator visibility is enhanced. Key features include: â&#x20AC;˘ 360 degree continuous rotation either way for precise picking and placing. â&#x20AC;˘ Wide jaw opening and grapple width to allow it to handle a variety of materials. â&#x20AC;˘ Tines are constructed of T-1 steel for long term durability. â&#x20AC;˘ Universal skid steer bracket to allow for multi machine mounting. â&#x20AC;˘ Selector valve used for rotation and open/close function. This allows for use with one additional hydraulic circuit. For more information, call 218/834-5555 or visit www.builtritehandlers.com.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 23, 2010 • Page 77

Your Powerful Partner Process Rock the Easy way with Kemper Equipment HEAVY DUTY QUARRY EQUIPMENT AND PARTS • CONVEYOR PARTS

• CRUSHERS JAWS, CONES & IMPACTORS

• SCREEN ACCESSORIES

• SCREENS FOR VARIOUS APPLICATIONS

• PORTABLE CRUSHERS & SCREENING EQUIPMENT

• WEAR PARTS FOR MOST CRUSHER MAKES, SAND SCREENS & LOG WASHERS

Kemper Equipment 5051 Horseshoe Pike, Suite 200 • Honey Brook, PA 19344

Kemper Equipment

PH:

610-273-2066

www.kemperequipment.com • sales@kemperequipment.com

CHECK OUT OUR LASTEST INVENTORY OF USED EQUIPMENT ONLINE!

Page 78 • June 23, 2010 • www.constructionequipmentguide.com • Recycing Section • Construction Equipment Guide

When are you going to start? Turn rubble, asphalt and concrete into valuable GREEN aggregate!

le e profitab Experienngc on your own! recycli 30-0418 0-2 CALL 1-80

The solution if dumping fees are shaving your profits!

up to 120 t/p/h 3/4“ minus in one pass Fuel consumption at 4 g/p/h Magnetic Metal Separator Dust suppression

Javier Davila

www.rubblemaster.com sales@rubblemaster.com

Business Development Manager Cell: (262) 388-1702 E-mail: sales@rubblemaster.com

Leslie Equipment Company Joins Sennebogen Network Leslie Equipment Company has recently joined the Sennebogen dealer network. Leslie Equipment Company will now be selling, servicing, and providing parts for the Sennebogen green line. Wayne A. Hoffman was recently brought on board at Leslie Equipment Company as the product sales specialist for the Sennebogen line. He can be reached at 513/313-0038 or hoffmanwayne@lec1.com. With ten locations throughout Ohio, West Virginia and Kentucky, Leslie Equipment Company has provided construction and forestry equipment for more than 40 years. To add to its inventory, Leslie Equipment is purchasing a fleet of material handlers through Sennebogen.

Wayne A. Hoffman was recently brought on board at Leslie Equipment Company as the product sales specialist for the Sennebogen line.

Leslie Equipment Company has recently joined the Sennebogen dealer network.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 23, 2010 • Page 79

; tru e mo bility ; hig h cap acity ; reli abilit y ; ver satilit y ; inte lligen ce

Top contractors know value Lokotrack LT Series Crush more material, minimize downtime and build profitability. Top contractors know the value of Lokotrack jaw, cone and impactor plants from Metso. Whether you’re tackling hard rock, demolition or recycling material, you can expect reliable, efficient crushing performance from Lokotrack – backed by world-class service and support.

www.metso.com

Lokotrack LT96 Jaw Plant BINDER MACHINERY CO.

WHITNEY & SON, INC.

Contractor & recycling customers in New Jersey

Aggregates, quarry, contractor & recycling customers in CT, MA, ME, NH, RI and VT

www.bindermachinery.com

914/738-5100

908/561-9000 856/767-5900

Aggregates & quarry customers in New York City and surrounding counties

www.ehrbar.com 4 Executive Plaza Yonkers, NY 10701

2820 Hamilton Blvd. South Plainfield, NJ 07080 201 North Route 73 Winslow Twp., NJ 08095

EDWARD EHRBAR, INC.

www.whitneyandson.com 95 Kelley Ave. Fitchburg, MA 01420

800/245-5472 978/343-6353 Fax: 978/343-6586 info@whitneyandson.com

Long Island: 601 Coates Ave Holbrook, NY

631/563-7600 New York City

718/626-3331

CB CON-AGG

MILTON CAT Contractor & recycling customers in state of New York

www.miltoncat.com 55 Industrial Park Drive Binghamton, NY 13904

607/772-6500 294 Ainsley Drive Syracuse, NY 13210

315/476-9981 500 Commerce Drive Clifton Park, NY 12065

518/877-8000 4610 E. Saile Drive Batavia, NY 14020

585/815-6200

Aggregates, quarry, contractor & recycling customers in PA 1500 S. Altamont Blvd. Frackville, PA

www.cbconagg.com 5300 Paxton Street Harrisburg, PA 17111

Rt. 54 & I 180 (Exit 5) Turboville, PA

570/874-3560

570/538-2551

146 Rose St. Indiana, PA

Wilkes-Barre Twp. Blvd. Wilkes-Barre, PA

724/463-8743

570/822-8141

3105 Route 219 Lantz Corners, PA

4326 Oregon Pike Lancaster, PA

814/778-5250

717/859-4905

US Rt. 6 East Mansfield, PA

309 Foothills Lane Mount Pleasant, PA

814/765-1611

570/662-7171

724/696-4080

100 Smith Drive Cranberry Twp., PA

4565 William Penn Hwy. Murrysville, PA

590 Suscon Road Pittston, PA

724/776-1400

724/327-1300

570/883-1044

168 Industrial Park Road Somerset, PA

Route 76E & Route 50 Clarksburg, WV

717/564-2121 Old Town Rd & Rte. 879 Clearfield, PA

11 Progress Drive Cranberry Twp., PA

724/776-7660

814/445-7915

304/842-2222

5896 Station Road Erie, PA

2995 Stewart Drive State College, PA

Route 2 Box 847 Shinnston, WV

814/898-3388

814/237-8338

304/592-5855

Page 80 • June 23, 2010 • www.constructionequipmentguide.com • Recycing Section • Construction Equipment Guide

1-888-717-2211 Fulll range e off portable e crushing,, screening,, conveying,, and d recycling g equipmentt Serving g the e Mid-Atlantic c and d Northeastt Regions http://www.screenservicesllc.com m

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 23, 2010 • Page 81

100%

rock star

(always an outstanding performance)

If you’re looking for maximum productivity with minimum maintenance, take a look at the Komatsu BR380JG-1. With a 180HP engine and a production output of 55 to 265 U.S. tons per hour, it’s ideal for crushing concrete debris or natural stone. And a one-touch setting adjustment gives you total control over the crushing capacity. For equipment that always gives 100%, choose machines that are 100% Komatsu.

100% Komatsu.

866.513.5778

www.komatsuamerica.com

KA04

www.KomatsuAmerica.com

MIDLANTIC MACHINERY INC.

ANDERSON Corporate Headquarters Pittsburgh 1000 Washington Pike Bridgeville Pa 15017 412/343 2300 Clearfield Pa 814/756-5311 Clarion Pa 814/226-4100 Cambridge Springs Pa 814/398-8899

Somerset Pa 814/443-2867 Albany, NY 518/785-4500 Buffalo, NY 716/877-1992 Endicott, NY 607/748-3400 Olean, NY 716/372-8822

Rochester, NY 585/334-6770 Syracuse, NY 315/463-8673 Watertown, NY 315/788-5572 Fairmont, WV 304/366-3075 Charleston, WV 304/756-2800

Manchester, NH 603/627-7696 Cumberland, ME 207/829-5503 Bangor, ME 207/942-0177 East Montpelier, VT 802/223-9689

2240 Bethlehem Pike Hatfield, PA 19440 215/822-0145 Harrisburg, PA 717/652-3190 Wilkes-Barre, PA 570/824-9891 Downingtown, PA 610/518-5870

Delmar, DE 302/846-0224 Odessa, DE 302/449-2850 Baltimore, MD 410/247-2100

EAST PBE, INC.

283 Pane Road Newington, CT 06111 860/665-7470 Fax: 860/665-7478

PINE BUSH EQUIPMENT INC. Pine Bush Office 97 Rt. 302 P.O. Box 106 Pine Bush, NY 12566 845/744-2006 Fax: 845/744-2900 www.pbeinc.com Holmes Office 24 Sybil Court Holmes, NY 12531 845/878-4004 Fax: 845/878-9626

Page 82 â&#x20AC;˘ June 23, 2010 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ Recycing Section â&#x20AC;˘ Construction Equipment Guide

EAST Developing conveyor solutions for any processing requirement for over 20 years

CC3680 Self Powered Diesel Hydraulic Conveyor â&#x20AC;&#x153;The CC3680 is a beast, handles the material from our crusher with easeâ&#x20AC;?

1;P? 7IOL 4;FO;<F? 2CG? 5;N=B *CP? "?GIHMNL;NCIHM I@ NB? #KOCJG?HN 7IO ,??> NI OS +;E? #>O=;N?> .OL=B;MCHA "?=CMCIHM

-Richard Androlewicz, Owner RAMPCO Construction.

Our heavy duty construction is designed for maximum performance on any type of material and easy to use features.

!BCF>L?H ;H> 3H>?L $0## +OMN <? 5;N=B *CP? $IIN;A? L?ACMN?L?> ;H> ;==IGJ;HC?> <S >OFN Must wear supplied protective Gear at all times @LIG .L?PCIOM 1BIQM IH IOL Q?<MCN? QQQ QB?HL?=S=FCHA?RJI =IG

All of our self powered radial stackers come in any belt width and lengths from 50â&#x20AC;&#x2122; and up. Conveyors can also be powered via easy electrical or hydraulic hook-up to your power source. FEATURES: â&#x20AC;˘ Radial stacking â&#x20AC;˘ Large receiving hopper â&#x20AC;˘ 600 ton per hour performance â&#x20AC;˘ Power raise standard equipment â&#x20AC;˘ Deutz F3L2011F Engine â&#x20AC;˘ Deutz D2011 turbocharged on 80â&#x20AC;&#x2122; model â&#x20AC;˘ Pindle tow hitch

When quality counts...

You had better be

using a Bandit! Bandit chippers offer the best money can buy! â&#x20AC;˘ 6â&#x20AC;? - 19â&#x20AC;? diameter capacities â&#x20AC;˘ Towable & self-propelled â&#x20AC;˘ Chip Box Combo & PTO units â&#x20AC;˘ Easy to feed â&#x20AC;˘ Almost impossible to plug â&#x20AC;˘ Fuel efďŹ cient

OPTIONS: â&#x20AC;˘ Track drive system â&#x20AC;˘ Power travel â&#x20AC;˘ Power fold â&#x20AC;˘ Specialty colors â&#x20AC;˘ Belt scales

In Stock Now: Used Chippers from $6000

Stop in today at your local authorized Bandit dealer!

DEALERS WANTED

Cherry Valley Tractor Sales

Call 508-987-7640 for more information or visit us on line at www.customcandf.com

Route 70 â&#x20AC;˘ Marlton, NJ â&#x20AC;˘ 08053

For information on the dealer near you and our complete line of radial stackers, wheeled, stackable and static conveyors. CUSTOM CONVEYOR & FABRICATION, INC. North Oxford Ma. 01537

! NEW

odel

M 255XP

856-983-0111

www.cherryvalleytractor.com www.cherryvalleytractor.net Bandit Industries, Inc. PHONE: (800) 952-0178 OR (989) 561-2270 â&#x20AC;˘ FAX: (989) 561-2273 sales@banditchippers.com â&#x20AC;˘ http://www.banditchippers.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 23, 2010 • Page 83

CRUSHING EQUIPMENT, PARTS & SERVICE (860) 429-2793 • Fax: (860) 429-0542

Ace Equipment Sales, Inc. and Milroy and Company LLC 171 Tolland Turnpike (Route 74) • PO Box 535 Willington, CT 06279

Don Bayer • (518) 527-1910 John Patton • (860) 429-2793 Bill Dahill • (203) 314-2113

Go to www.acecrushers.com for a complete listing and description of our new and used equipment.

TELSMITH model SBS Cone Crushers are the most efficient and cost effective cone crushers available today. In models ranging from the 38SBS (200hp) up to the 68SBS (600hp) with capacities that can exceed 900 tons per hour, the SBS is designed to deliver consistent performance for decades. 52 SBS BARE CONE AND PORTABLE IN STOCK IN CONNECTICUT

The QUARRYTRAX model TJ3258 offers hydraulic adjustment, overload relief, higher production yields, less maintenance, fewer repair parts, an ability to safely clear the crushing chamber following an emergency shutdown, handheld wireless controls, PLC controls and sonar level sensors.

TELSMITH QUARRY-TRAX Model TJ3258 is designed for the serious contractor or aggregate producer. It is a high production, track mobile, primary jaw crushing plant.

IN STOCK IN CONNECTICUT CALL TO SCHEDULE A DEMONSTRATION

USED EQUIPMENT FOR SALE GENERATORS

CRUSHERS TELSMITH 4448 BARE JAW, Dealer Reconditioned ..................................$$285,000

Nor dber g Model NW3006203-CC Por t a b l e Cr ushing Plant ..................................$$365,000

Caterpillar Generator 725 KW Prime Power, s/n 2WJ02025 ....................................$$75,000

TELSMITH 3646 BARE JAW, Excellent Condition ..........................................$$185,000

Nor dber g HP300 Cone Por table Closed Cir cuit Plant ......................................$$325,000

Caterpillar Generator 350 KW, s/n 2WB01444 ............................................................$$30,000

DID YOU KNOW? For over a hundred years, Telsmith has designed and manufactured in the United States of America.

Crushers should operate for decades. With that standard in mind, Telsmith designs, manufactures and services a range of jaw, cone and impact crushers as well as single-deck to quad-deck screens.

Page 84 • June 23, 2010 • www.constructionequipmentguide.com • Recycing Section • Construction Equipment Guide

MB 750 Breaker Features Double Retainer Bar System

A new feature on the MB 750 is the double retainer bar system, which maximizes the service of the tool and retainer system.

Aggregate Equipment Currently Available 2009 (New / Unused) JCI FT5162I Track Mounted 5’x16’ Double Deck Screening Plant, with Heavy Duty 48”Apron Feeder. 2008 Pioneer FT4240CC Track Mounted Impact Crushing Plant, w/ 4’x12’ Close Circuit Double Deck Screen. 2008 Pioneer FT2640 Track Mounted Jaw Crushing Plant.

2010 Astec Mobile Screens 2612V Prosizer. Portable Plant with High Frequency Screen and Crusher All On One Chassis, Includes On-Plant Product Conveyors and Feed Hopper. 2009 Custom 30”x 50’ Radial Stacking Conveyor, Hydraulic Drive.

2008 (New / Unused) Pioneer 620E3 Portable Screening Plant, Electric.

2008 Custom 30”x 50’ Radial Stacking Conveyor, Electric Drive.

2008 Astec Mobile Screens 710T Track Mounted Screening Plant, with Fines Conveyor.

2008 Custom 30”x 50’ Radial Stacking Conveyor, Electric Drive.

1101 Maple Road • Elma, NY 14059

716-655-1101 Toll Free: 888-655-1101 Fax: 716-655-0374 www.baschmann.com

The MB 750, Atlas vibrations that could be Copco’s recent addition to detrimental to both the carits line of medium-duty rier and the operator. hydraulic breakers, brings A new feature on the MB power, dependability and 750 is the double retainer flexibility to the job site. bar system, which maxiWith high efficiency and mizes the service of the tool output-to-weight ratio, the and retainer system. Extra MB 750 also features a new long retainer bars provide a double retainer bar system maximum contact surface and DustProtector II to to the tool and the lower maximize the service life of hammer, and they can be the tool. used on both sides for Powered by a combinaextended service life. tion of oil and gas, the MB Double retainer bars offer 750 recovers energy by higher wear resistance than maximizing the recoil a retainer pin and are a relieffect. This boosts the outable and proven locking put power of the breaker system for the locking pins, without increasing the according to the manufachydraulic input power of the turer. carrier, which results in less The MB 750 also is availfuel consumption during able with the DustProtector Powered by a combina- II, a two-stage sealing sysoperation. The MB 750 also tion of oil and gas, the MB tem with coarse and fine achieves greater perform- 750 recovers energy by strippers that prevents the the recoil penetration of abrasive dust ance and productivity with- maximizing effect. out adding weight to the into the lower section of the carrier or requiring the use breaker. DustProtector II of a larger carrier to handle the load. In also keeps the lubricant around the wear addition, the MB 750’s general versatility bushing for a longer period of time, lowerand compatibility with a broad spectrum of ing grease consumption. The system excavators means more options on the job reduces wear on the bushings and the hamsite, according to the manufacturer. mer and protects against damage. Atlas Copco breakers are among the quiThe MB 750 is ideal for secondary etest on the market, and the MB 750 is no breaking, demolition, excavation and exception at 118 dB (A). Atlas Copco’s trenching, tunneling, and special applicaVibroSilenced system isolates the percus- tions such as underwater — or any job that sion mechanism acoustically from the calls for a hydraulic breaker. external guide system. Moreover, the For more information, visit VibroSilenced system prevents damaging www.atlascopco.us.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 23, 2010 • Page 85

Screening made simple Nordberg CV50 and CV100 mobile screens are rugged, reliable and versatile enough to screen just about anything. These compact screens are easy to move from one job site to the next, with the fastest set up time in the industry. Nordberg CV mobile screens can make a real difference to your bottom line. It’s a simple concept that simply works. Contact your local Metso distributor today.

www.metso.com

Nordberg CV50

Aggregates, quarry, contractor & recycling customers in ME, NH, MA, RI, & VT; Contractor & recycling customers in NY state, excluding New York City and surrounding counties

www.miltoncat.com

14 Kendrick Road Wareham Industrial Park Wareham, MA 01576 508-291-1200 2158 Plainfield Pike Commerce Park West#10 Cranston, RI 02920 401-946-6350

55 Industrial Park Drive Binghamton, NY 13904 607-772-6500

Route 2, One Cat Lane Richmond, VT 05477 802-434-4228

100 Quarry Drive Milford, MA 01757 508-634-3400

Exit 6 I-89 Hopkinton, NH 03229 603-746-4611

4610 E. Saile Drive Batavia, NY 14020 585-815-6200

Exit 7 I-89 • Route 103 Warner, NH 03278 603-746-4671

294 Ainsley Drive Syracuse, NY 13210 315-476-9981

16 Pleasant Hill Road Scarborough, ME 04070 207-883-9586

500 Commerce Drive Clifton Park, NY 12065 518-877-8000

79 Robertson Boulevard Brewer, ME 04412-2246 207 -989-1890

Contractor & recycling customers in NJ

www.bindermachinery.com 2820 Hamilton Blvd South Plainfield, NJ 07080 908-561-9000 201 North Route 73 Winslow Township, NJ 08095 856-767-5900

Aggregates, quarry, contractor & recycling customers in CT

Aggregates, quarry, contractor & recycling customers in PA

www.tylerequipment.com

www.cbconagg.com

1980 Berlin Turnpike Berlin, CT 06037 860-356-0840 800-352-4473 860-828-6727 fax

Aggregates, quarry, contractor & recycling customers in New York City and surrounding counties

www.ehrbar.com 4 Executive Plaza Yonkers, NY 10701 914-738-5100 Long Island: 601 Coates Avenue Holbrook, NY 11741 631-563-7600 New York City 718-626-3331

5300 Paxton St. Harrisburg, PA 717-564-2121 Old Town Rd. & Rte 879 Clearfield, PA 814-765-1611 11 Progress Avenue Cranberry Twp., PA 724-776-7660 3950 Depot Road Erie, PA 814-898-3388 1500 S. Altamont Blvd. Frackville, PA 570-874-3560 145 Rose St. Indiana, PA 724-463-8743 3105 Route 219 Lantz Corners, PA 814·778-5250

US Rt. 6 East Mansfield, PA 570-662-7171 4565 William Penn Hwy Murrysville, PA 724-327-1300 168 Industrial Park Rd Somerset, PA 814-445-7915 2995 Stewart Drive State College, PA 814-237-8338 Rt. 54 & I 180 (Exit 5) Turbotville, PA 570-538-2551 Wilkes-Barre Twp Blvd. Wilkes-Barre, PA 570-822-8141 4326 Oregon Pike Lancaster, PA 717-859-4905 309 Foothills Lane Mount Pleasant, PA 724-696-4080 590 Suscon Road Pittston, PA 570-8832-1044 570-883-1044

Page 86 • June 23, 2010 • www.constructionequipmentguide.com • Recycing Section • Construction Equipment Guide

UPCOMING SPECIAL SECTIONS ISSUE

Attachments Ad Closing Date Publishing Date

ISSUE

Backhoes & Attachments Ad Closing Date Publishing Date

ISSUE

18 20 22

August 23, 2010 September 1, 2010

Mini & Compact Equipment Ad Closing Date Publishing Date

ISSUE

July 26, 2010 August 4, 2010

Off-Road Trucks Ad Closing Date Publishing Date

ISSUE

June 28, 2010 July 7, 2010

September 20, 2010 September 29, 2010

Trailers Ad Closing Date Publishing Date

October 18, 2010 October 27, 2010

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 23, 2010 • Page 87

These Grinders Mean Business

Chadwick-BaRoss Inc. 160 Warren Avenue • Westbrook, ME 04092 800-262-5714 207-854-8411 Fax: 207-856-2995 www.chadwick-baross.com 15 Katrina Road • Chelmsford, MA 800-804-0775 978-256-9571 Fax: 978-256-8802 314 Main Street • Caribou, ME 04736 800-270-2547 207-498-2547 Fax: 207-498-6596 188 Perry Road • Bangor, ME 04401 800-698-4838 207-942-4838 Fax: 207-941-0856

2009 Tub Grinder

3010T Tub Grinder with Track System

Power up your productivity with the impressive ﬂeet of grinders from DuraTech. All DuraTech grinders feature enclosed engine compartments with self-cleaning rotary screens on the air intake and HPTO microprocessor-controlled clutches. They are equipped with CAT diesel engines ranging from 325hp to 950hp. DuraTech takes on heavy-duty jobs with the highest level of efﬁciency.

237 Sheep Davis Rd. • Concord, NH 03301 800-477-4063 603-224-4063 Fax: 603-224-3001

Wm. Biers, Inc. Port of Albany, NY 12202 518-434-2747 Fax: 518-434-2754 www.wmbiers.com

ZZZ UHPX ¿

Call to Arrange a Demo.

Portable Tracked Conveyor

RM100 Compact Recycler • • • • •

Screen for Less Non-Clogging Self Cleaning Rotors Screens Wet Materials Finished Material from 3/8” - 2 3/4” Minus Special Applications for Composting and Mulching • 18 Different Models for Skid Steers, Backhoes, Excavators and Wheel Loaders

Crushes Concrete, Asphalt, Brick, Block and All Rock Products. • High Production Rates • Crush to a 3/4” Minus with Closed Circuit Option • John Deere Powered

• 62,000 Pounds • Transports in 1 Load • Dust Supression

Extremely Low Operating Cost Recycle & Reuse Materials Onsite

• Quick & Easy Set-Up • Competitively Priced • Reduced Operating C o s t s ( F u e l & Labor) • Great Operating Efficiency • Natural Stockpile Capacity Increased

• No Contamination of Product • Easy to Move Around Job-Site • Tracked & Wheeled Models Av a i l a b l e • Full Electric & Hydraulic Models Av a i l a b l e

Serving the Entire Northeast 203-569-0339 COR-EQUIP.COM Follow us on: facebook.com/corequipmentsales • twitter.com/corequipsales • youtube.com/corequip A Division of Cavaliere Industries

Page 88 â&#x20AC;˘ June 23, 2010 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ Recycing Section â&#x20AC;˘ Construction Equipment Guide

REMU Screening Buckets Even more productive than big trommels!

Â&#x2021; )RU PL[LQJ VFUHHQLQJ VHSDUDWLQJ DHUDWLQJ SDGGLQJ HWF Â&#x2021; :RUNV ZHOO ZLWK PRLVW DQG GLIÂżFXOW PDWHULDOV

Screening Buckets & Amphibious Excavators ZZZ UHPX Âż

7ROO )UHH

(PDLO

XVD#UHPX Âż

Big Float Amphibious Excavators

Â&#x2021; $PSKLELRXV H[FDYDWRU IRU VKDOORZ DQG PDUVKODQGV Â&#x2021; +\GUDXOLF SRQWRRQ VWUXFWXUH FDQ EH QDUURZHG IRU WUDQVSRUWDWLRQ

U-SCREEN C-36

NEW!

Dealer Inquiries Invited Designed For Skid Steers, Loaders & Excavators â&#x20AC;˘ Screen 500 to 600 yards per day â&#x20AC;˘ Any Size Screen Available â&#x20AC;˘ Stacking Height: 9â&#x20AC;&#x2122; â&#x20AC;˘ Width: 5â&#x20AC;&#x2122;6â&#x20AC;? â&#x20AC;˘ Length: 28â&#x20AC;? â&#x20AC;˘ 6â&#x20AC;&#x2122;x5â&#x20AC;&#x2122; Screening Deck

â&#x20AC;˘ Easy Change Screens â&#x20AC;˘ 25 HP Kubota Diesel Power â&#x20AC;˘ Hydraulically operated Screen â&#x20AC;˘ Hydraulic trailer axle â&#x20AC;˘ 30â&#x20AC;? Hydraulic Conveyor Belt â&#x20AC;˘ Towed with 1 Ton Vehicle

www.u-screen.com 905 Turnpike Street â&#x20AC;˘ Canton, MA 02021

1-866-USCREEN (781) 828-9100 â&#x20AC;˘ Fax: (781) 821-8807

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ June 23, 2010 â&#x20AC;¢ Page 89

CHESAPEAKE SUPPLY AND EQUIPMENT CO. Savage, MD 410/792-4750 800/483-0885

Felton, DE 302/284-1000 800/282-8522 KEIL EQUIPMENT CO., INC. Hudson, NY 518/537-6221 MONROE TRACTOR N. Syracuse, NY 315/452-0000 Buffalo, NY 716/681-7100 Rochester, NY 585/334-3867 Binghamton, NY 607/754-6570 Elmira, NY 607/739-8741 Albany, NY 518/785-8013 CENTRAL EQUIPMENT COMPANY Stillwater, ME 207/827-6193

! ! $

BOBCAT OF BOSTON

! ! $ "

North Reading, MA 978/664-3727

" " ! ! ! ! $

$ !

$ $ ! # !

Bourne, MA 508/759-5020 W&W EQUIPMENT, INC. DuBois, PA 814/375-9606

Page 90 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Foreign Firms in Haiti Prepare for Ramon Galli of Galli Post-Quake Construction Projects Ready Mix Concrete By Ben Fox ASSOCIATED PRESS WRITER

PORT-AU-PRINCE, Haiti (AP) Like a small-town booster, Randall Perkins proudly showed off his base camp: airconditioned bedrooms and offices for 120 managers, a mess hall that can serve 1,000 meals a day, a gym and an infirmary alongside his bulldozers and dump trucks. Pompano Beach, Fla.-based AshBritt Inc. so far has invested $25 million in its Haitian reconstruction operation covering a soccer field. Now all Perkins needs is a government contract to make his investment pay off. Nearly six months after the devastating January quake that killed as many 300,000 and destroyed much of the capital, not one major reconstruction contract has been awarded. That hasn’t stopped AshBritt and other masters of disaster from preparing for the day when the pledged international support — some $10 billion over the next decade — starts going up for bid. Some companies, such as Ceres Environmental Services Inc. of Brooklyn Park, Minn., are veterans of the cleanup of Hurricane Katrina, where they hauled away tons of downed trees and branches from the 2005 storm. Ceres is building temporary homes for quake victims while preparing to bid for more work. Mobile, Ala.-based DRC Group has a 35acre service yard in Port-au-Prince for hundreds of pieces of heavy equipment for demolition and debris removal. Though they don’t know yet how big the contracts will be, they’re banking from experience on the tantalizing prospect of work for years to come. AshBritt was awarded nearly $900 million from the U.S. government for debris removal after Katrina, collecting and processing some 21 million cu. yds. of wreckage. “There’s a tremendous amount of work to do here,” Perkins said of Haiti. “There are a lot of slices in that pie.” So far, governments and private groups have spent hundreds of millions of dollars on searches, rescues, emergency supplies and clearing rubble. But most of that work was done without competitive bidding and represents only a fraction of what eventually will be spent. Very little of the promised foreign aid has been released, caught up either in legislative approval, bureaucratic regulations or in the complications of life in Haiti. The U.S. Congress, for example, is still considering a bill that would provide up to $2 billion to Haiti. The Caribbean country, meanwhile, faces a dizzying — and time-consuming — array of logistical and legal issues, including securing permission to tear down buildings whose owners perished in the quake. Any land cleared for construction risks being taken over immediately by squatters. But Prime Minister Jean-Max Bellerive, who will oversee the Interim Haiti Reconstruction Commission with former U.S. President Bill Clinton, said financing and construction contracts would start to be issued within months. There is much work to be done: The quake destroyed

about 105,000 homes, 1,300 schools, 50 hospitals, the presidential palace, parliament, courts and the port. Many other structures were damaged, and the country was left with enough rubble to fill the Louisiana Superdome five times. Most of the companies seeking work in Haiti won’t talk about it, in part to avoid seeming like they are capitalizing on catastrophe. There also is fierce competition for contracts to clear debris, carve new roads and drainage canals, restore the electrical grid and rebuild government offices. AshBritt is one of the more open. The company has formed a joint venture with the GB Group, a conglomerate run by one of Haiti’s wealthiest men, Gilbert Bigio, and established partnerships with a number of smaller construction firms. Perkins expects to hire 600 to 700 Haitians within a year, as well as provide capital to the smaller local construction companies that it will work with in partnership. “There is an opportunity in this terrible disaster to use the money that is coming in to make a difference,” he said at his base camp, the former site of the Israeli Defense Forces’field hospital set up in the aftermath of the quake. DRC Group has formed a partnership with Haiti’s V&F Construction and hired 300 local workers to demolish buildings, remove debris and set up portable toilets in the quake zone, according to a corporate statement. It already has been hired to demolish buildings and clear streets in Port-auPrince and is expected to be a major competitor for the large government contracts to come. The company declined requests for an interview. Ceres Environmental, which was awarded nearly $500 million from the U.S. government to remove debris after Katrina, is partnering with Yele Haiti, the charity founded by Haitian-born singer Wyclef Jean, to build 100 temporary wood-frame homes for quake survivors. David A. Preus, the company’s project manager for operations in the country, declined in an interview to discuss future contracts. “The future of Haiti is very bright, and Ceres looks forward to being a part of that future,” Preus said. Also scouting for prospects are a number of construction companies from the neighboring Dominican Republic that have experience in operating in Haiti and, perhaps more importantly, easier access to the heavy equipment that is in short supply. “No one is doing anything yet. All the companies are waiting for the projects to be approved,” said Manuel Estrella, president of Grupo Estrella, which had a pre-quake road project in Haiti and has since found some construction and debris-removal work. All the companies are confronting Haiti’s reputation for corruption. Those who would discuss the subject insist the problem is no worse in the Caribbean country than elsewhere in the world. “I would not be down here with the money I’m investing if I thought I was going to be overrun by corruption,” Perkins said.

Company Dies, 74

Ramon A. Ray Galli, 74, of Allentown, Pa., passed away June 1, 2010, at Lehigh Valley Hospital in Salisbury Twp. Born in Nanticoke, Mr. Galli was a son of the late Roman and Ida (Fienauri) Galli. Mr. Galli graduated from Newport Township High School with the class of 1954 and then attended Williamsport Technical School. His career was devoted to the concrete industry starting in 1958 with G&H Excavating. In 1960, Mr. Galli formed Galli Ready Mix Concrete Company. He relocated to Allentown to start his sister company, QC Concrete Inc. in 1986. Mr. Galli’s companies supplied concrete to the Berwick Nuclear Power Plant, the Lehigh Valley Tunnel II on the PA Turnpike and sections of Interstate 78. Mr. Galli retired from the concrete industry in 1992. After retirement, he remained highly respected within the concrete industry and several companies requested his expertise and assistance in project management. Although he was skilled in all trades, Mr. Galli was a craftsman at heart and took pride in making beautiful furniture for family and friends. Mr. Galli was a member of St. Joseph the Worker Catholic Church in Orefield. Mr. Galli’s greatest love was his family. He was a loving and devoted husband, father, grandfather and great-grandfather. He is survived by his wife of 52 years, Mary Ann (Charnitski) Galli; sons David M. and wife Lori of Orefield, Pa., Donald A. and wife Andrea of Mountain Top, Pa., and Dean A. and wife Andrea of Orefield; daughters Debra A. wife of Duane Bonar of Walnutport, Pa., and Deanna M. wife of Jeffrey Games of Harrisburg; brother Ronald of Nanticoke; sister Judith Middaugh of Pinehurst, N.C.; grandchildren Danielle (Bonar) Summers and Ryan Bonar, Kimberly and Michael Galli, Donnie, Dustin and Angeline Galli, Kaitlyn and Mackenzie Galli and Travis and Emily Games; great-grandchildren Teagan and Beckett Summers; nieces, nephews and cousins. A Mass of Christian Burial was held on June 7, 2010, at St. Joseph the Worker Catholic Church, in Orefield; Interment followed at Resurrection Cemetery in Allentown. In lieu of flowers, contributions may be made to the Ramon Galli Memorial Fund, c/o Keller Funeral Home, PO Box 52, Fogelsville, PA 18051.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 91

All Island Equipment

Elliott & Frantz, Inc.

39 Jersey St. West Babylon, NY 11704 631/643-2605 631/643-4060

450 E. Church Rd. King of Prussia, PA 19406 610/279-5200 Jessup, MD 410/792-9134 Washington, D.C. 301/725-7394 Hagerstown, MD 301/733-8100 Harrisburg, PA 717/652-5430 Delmar, DE 302/846-3033

www.allislandequipment.com

E.W. Sleeper Company Inc. 391 Loudon Rd. Concord, NH 03301 603/225-3361 Fax: 603/225-4918 www.ewsleeper.com

George & Swede Sales & Service Inc.

Highway Equipment Company

7155 Big Tree Road Pavilion, NY 14525 800/724-8722

Harter Equipment, Inc.

Rte. 19 RD #1 Zelienople, PA 16063 724/452-7800 5846 West Rd. & I-79 McKean, PA 16426 814/476-7755 Rte. 219 North Dubois, PA 15801 814/371-3600

615 State Route 33 Millstone Twp, NJ 08535 732/446-7600 888/HARTER-1

Westchester Tractor, Inc. Westchester Tractor 60 International Blvd. Brewster, NY 10509 845/278-7766 Fax: 845/278-4431 www.wtractor.com

Page 92 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Komatsu WA250PZ-6 Parallel Tool Carrier Offers More Power Komatsu America Corp.’s WA250PZ-6 tool carrier has improved visibility and increased loading power and performance for the construction, utility, government, sewer, waste and agricultural markets. This machine includes technological enhancements for greater performance, operator comfort and efficiency, according to the manufacturer. The WA250PZ-6, with an operating weight of 26,808 to 27,778 lbs. (12,160 to 12,600 kg) and a heaped bucket capacity of 2.5 to 3.0 cu. yd. (1.9 to 2.3 cu m), gets its power and productivity from a Komatsu SAA6D107E-1 engine. This engine has a net power of 138 hp (103 kW), is EPA Tier III emissions certified and provides high productivity with low fuel consumption and low noise. The WA250-6 is equipped with KOMTRAX technology, which sends machine operating information to a secure Web site utilizing wireless technology. Data such as operating hours, location and maintenance alerts are relayed to the web application for analysis. The KOMTRAX fleet monitoring system increases machine availability, reduces the risk of machine theft, allows for remote diagnosis by the distributor and provides other information to drive business efficiency and productivity, according to the manufacturer. Parallel Z-Bar Linkage Design The WA250PZ-6 offers a parallel z-bar linkage design, which improves visibility for operations such as loading pallets and other materials onto forks. The WA250PZ-6 also provides parallel movement with large tilt force for both bucket and fork applications. Increased Power and Performance With Hydrostatic Transmission System The WA250PZ-6 incorporates Komatsu’s hydrostatic transmission system (HST) that allocates only as much power as is needed for a given application. The engine power is transmitted hydraulically to a transfer case, then mechanically out to the differentials and to the four driving wheels, making the

The WA250PZ-6 gets its power and productivity from a Komatsu SAA6D107E-1 engine. This engine has a net power of 138 hp (103 kW), is EPA Tier III emissions certified and provides high productivity with low fuel consumption and low noise.

WA250PZ-6 a very powerful yet efficient machine that responds quickly and smoothly to varying job conditions. By adjusting automatically to the tractive effort demands of the work at hand, Komatsu’s HST provides for quick travel response and aggressive drive into the pile. The full auto-shifting feature eliminates gear shifting and the kick-down switch gives the operator the ability to concentrate on digging and loading operations for faster cycle times and increased productivity. Variable Traction Control With ‘S-mode’ The tractive effort of the machine, when traveling at low speeds, can be reduced by using the traction control switch to control tire slippage. This is especially beneficial for surfaces such as wet concrete or soft ground where tires are more likely to slip. The traction control system eliminates excessive bucket penetration and tire slippage during operations such as stockpile loading, extending the life-cycle of tires and improving work efficiency. A new “S-mode” control provides optimum driving force for operations on slippery road surfaces, including snow removal or working on snow-covered surfaces, by controlling the engine speed and HST motor when traveling at a low speed.

Maximum Breakout Force, Dumping Clearance and Reach The WA250PZ-6 also has an increased breakout force of 26,490 lbs. (12,015 kg) and high static tipping loads (20,767 lbs. [9,420 kg] straight and 18,067 lbs. [8,195 kg] at a 40 degree full turn) to provide power and stability during the toughest operations. The long lift arms provide high dumping clearances and maximum dumping reach so the operator can “level” or “even” loads on the body of a dump truck. Improved Operator Comfort Komatsu designed an operatorfriendly cab with increased backwards seat slide adjustment and more interior room. The pressurized cab reduces noise levels to a low 70 d[B]A and keeps dust and other particles from the cab’s interior. The rear-hinged cab doors and sloped staircase type steps with large diameter handrails allow for easy entrance and exit and a wide pillar-less glass windshield provides for increased visibility. The viscous damping mount system helps to minimize noise, shock and vibration in rough working conditions. For optimum comfort, the WA250PZ-6 features a low effort, multi-function mono lever pres-

sure proportional control (PPC) hydraulic system with a forward, neutral and reverse control switch for smooth and easy directional changes. There also is a max traction switch on the mono lever to cut traction control on and off easily with the push of a button.

temperature air cleaner clogging, etc. If the controller finds abnormalities the error is displayed on the LCD. The EMMS also stores abnormalities and error codes for troubleshooting assistance to mechanics which minimizes diagnosis and repair time.

Easy Maintenance and Serviceability The WA250PZ-6 allows for easy maintenance in order to reduce costly downtime. The large gull-wing type doors open widely and easily (with the assistance of a gas spring) allowing the operator or technician to perform daily service checks from the ground. The engine fan is hydraulically driven and if the machine is operating in adverse conditions the operator can reverse the hydraulic cooling fan (to blow out debris) from inside the cab by simply pressing a button on the control panel, or the fan can be preset to automatically activate at given intervals. The tool carrier is equipped with the Komatsu equipment management monitoring system (EMMS), which monitors all critical systems and alerting and guiding the operator should an abnormality occur. Komatsu’s EMMS often prevents a small problem from becoming a major service issue contributing to a reduced cost of operation. The controller monitors key engine features such as oil pressure, coolant

Increased Durability and Reliability The wet multi-disc brakes and fully hydraulic braking system, combined with dynamic braking, mean lower maintenance costs and higher reliability. The dynamic braking function means using the wet disc brakes less often, increasing overall brake disc life. The wet disc brakes are fully sealed keeping contaminants out and reducing wear and subsequent maintenance. This also means no air system to bleed and no condensation of water that can lead to corrosion and freezing. Controllers, connectors, sensors and wiring have undergone extensive testing to ensure reliability in the harshest of conditions. The electronic connectors are DT-type and seal against dirt and moisture. Flat face-to-face O-ring seals are used to securely seal hydraulic hose connections and all hydraulic cylinders are protected by metal guard rings for additional reliability. For more information, visit www.komatsuamerica.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 93

BINDER MACHINERY CO. 2820 Hamilton Blvd. South Plainfield, NJ 07080 980/561-9000 201 North Route 73 Winslow Township, NJ 08095 856/767-5900

EAST PBE, INC. 283 Pane Road Newington, CT 06111 860/665-7470 Fax: 860/665-7478

PINE BUSH EQUIPMENT INC. www.pbeinc.com Pine Bush Office 97 Rt. 302 P.O. Box 106 Pine Bush, NY 12566 845/744-2006 Fax 845/744-2900 Holmes Office www.pbeinc.com 24 Sybil Court Holmes, NY 12531 845/878-4004 Fax 845/878-9626

EDWARD EHRBAR INC. www.ehrbar.com 4 Executive Plaza Yonkers, NY 914/738-5100 Fax: 914/738-6847 601 Coates Ave. Holbrook, NY 11741 631/563-7600 Fax: 631/218-1069 42 Kenosia Ave. Danbury, CT 203/743-0088

MIDLANTIC MACHINERY INC. 2240 Bethlehem Pike Hatfield, PA 19440 215/822-0145 Harrisburg, PA 717/652-3190 Wilkes-Barre, PA 570/824-9891 Delmar, DE 302/846-0224 Odessa, DE 302/449-2850 Baltimore, MD 410/247-2100

Page 94 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIGHTY

MUSCLE Mustang Skid Steer models 2044 and 2054 are compact workhorses designed to dig, load and haul the most stubborn material. • With rated operating capacities of 1,450 and 1,650 pounds, and breakout forces of 4,000 and 5,000 pounds, these skid steers provide the muscle you need • Powerful four-cylinder, 49.5-hp, direct-injected Yanmar Tier III diesel engine

A firm believer in strong foundations

• Spacious operator’s station with optional suspension seat reduce fatigue after a rugged day on the job

Are you responsible for meeting tight deadlines without compromising on quality?

• Two hinged doors provide full access to the engine control valve and hydraulic ſNVGTU and cooling systems

At Dynapac, we put all our knowledge and many years of experience into the making of high performance compaction and concrete equipment. We offer an extensive range of large and small construction equipment that are user friendly, rugged and flexible to your needs. We stand behind you all the way with service and spare parts to ensure your project runs smoothly. Check with us first, when you need heavy duty compaction and concrete equipment that won’t let you down.

ANDERSON EQUIPMENT COMPANY 800/414-4554 Pennsylvania Pittsburgh Cambridge Springs Clarion Clearfield Somerset

New York Buffalo Albany Endicott Olean

Rochester Syracuse Watertown

West Virginia Charleston Fairmont

New Hampshire Manchester

Vermont East Montpelier

Maine Cumberland Bangor

ASPHALT CARE EQUIPMENT & SUPPLIES 2765 Galloway Road Bensalem, PA 19020 215/639-9800 800/223-1202 Fax: 215/639-9802 www.asphaltcare.com

www.dynapac.com

G&H SERVICE, INC.

SERVICING YOUR EQUIPMENT NEEDS SINCE 1946

Dealer•Imprint 121B Water St. • Route 206 North Newton, NJ 07860 • 973/383-3370 Jim Maillet 973/390-7392 • Dick Clark 973/390-7390 www.ghserviceonline.com

mustangmfg.com

Pirtek Adds New PFMU21-20 Hydraulic Hose to Its Lineup Pirtek, an onsite hydraulic and high pressure hose replacement provider, has added a new hydraulic hose to its product range. This new hydraulic hose is designed to work at 3,000 psi and has an abrasion resistant cover which conforms to both SAE and MSHA standards. The part number for this new hose is PFMU21-20 (standing for Pirtek Performance hose and U for U.S. mining safety and heath authority approval with a

1.25 in. (3 cm) bore size). The hose is constructed with an oil resistant inner tube, a four wire spiral reinforcement and is available in lengths of up to 131 ft. (40 m). It can be used in multiple applications for different industries, including construction and drilling equipment, plastic injection molding and manufacturing facilities. For more information, visit www.pirtekusa.com.

Keep Up With All the Industry News Subscribe to

Construction Equipment Guide Today! Toll Free 800/523-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 95

Your wish is its command. Think it, then do it, with the precise hydraulics of a new Zaxis Dash-3 Excavator. Low-effort, short-throw pilot levers, balanced engine performance and hydraulic ﬂow, best-in-class metering, and smooth multifunction operation make good operators great, and great ones unbelievable. These utility-sized Dash-3s also deliver increased swing torque, faster arm roll-in, and faster boom lower/arm movement for faster cycle times. Bonus. Tired of jerky, wandering controls that have a mind of their own? Make a smooth move to new Hitachi Dash-3 Excavators. www.hitachiconstruction.com

EQUIPMENT COMPANY Pittsburgh, PA 412/741-1731

30 Barnes Industrial Park Rd Wallingford, CT 06810 203/265-6781

Clearfield, PA 814/765-8500

Brookfield, CT 06804 203/775-1203

Charleston, WV 304/755-7788

Plainfield, CT 06374 860/546-4808

80 Southbridge Rd. North Oxford, MA 01537 508/987-8786 Billerica, MA 01862 978/667-4345 Plymouth, MA 02363 508/830-9997 No. Swansea, MA 02777 508/379-9810 Springfield, MA 01104 413/543-5595

118 St. Nicholas Ave. South Plainfield, NJ 07080 908/753-8080 800/241-7070 Fairfield, NJ 07004 973/227-2221 800/321-8080 Lumberton, NJ 08048 609/267-2020 888/217-0600 Beacon, NY 12508 845/831-1800 800/724-0725

Page 96 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bobcat E50 Boasts Tail Swing of Less Than One Inch With a tail swing of less than an inch, the new Bobcat E50 compact excavator can work in confined areas without sacrificing digging performance. The E50 joins the Bobcat M-Series excavator line in the 4- to 5-ton (3.6 to 4.5 t) weight class. An operating weight of 10,677 lbs. (4,843 kg) and an overall width of 77.2 in. (196 cm) make it easy to transport, while a bucket breakout force of 9,442 lbs. (4,283 kg) provides power for tough conditions. Redesigned hydraulics with a load-sensing pump and closed center-valve system provide improved, refined control of machine travel and work-group operation. The new hydraulics combined with re-engineered boom geometry also result in increased bucket breakout forces. Cushioned work-group cylinders offer smooth end-of-stroke for precise control, according to the manufacturer. The E50 comes with an auto-idle feature which, if activated by the operator, automatically returns the engine to idle if excavator functions are not used for a period of four seconds, saving fuel and reducing job site noise. The engine automatically returns to the preset throttle position as soon as the operator starts working again. For precise engine speed adjustments, a new easy-to-use rotary knob has been added to the controls. Within the operator’s area, the boom swing control has been moved from the floor and placed on a thumb switch on the left joystick, making it easier to operate and opening up space on the floor for the operator’s foot. New larger travel pedals fold up to provide more floor space while flushmounted floor mats make cleanup easier. A keyless start system that discourages theft and vandalism is available as an option. A TOPS/ROPS canopy with high-back suspension seat, retractable seat belt, cup holder, adjustable armrests and lockable toolbox is standard on the E50 while a quiet, com-

The E50 joins the Bobcat M-Series excavator line in the 4- to 5-ton (3.6 to 4.5 t) weight class. An operating weight of 10,677 lbs. (4,843 kg) and an overall width of 77.2 in. (196 cm) make it easy to transport.

Bobcat’s in-track swing frame keeps the swing castings and cylinders within the width of the tracks when digging in an offset position, helping the operator dig flush against an obstacle.

fortable enclosed “radio ready” cab with heat and air conditioning is available as an option. The cab includes an improved air conditioning system with a 20 percent increase in air flow and additional air ducts. An optional deluxe cloth seat also is available. Like all Bobcat M-Series compact excavators, the E50 features an X-frame undercarriage that provides improved ground clearance and sheds debris for reduced cleanup time. Drive motor covers are inset within the motor wrap-arounds to protect them from potential damage. Integrated slew brakes hold loads still and steady on slopes for more accurate placement. The need for the operator to manually engage the slew brakes during transport is eliminated, making it easier to load and position the machine. In addition, Bobcat’s in-track swing frame keeps the swing castings and cylinders within the width of the tracks when digging in an offset position, helping the operator dig flush against an obstacle. When other compact excavators work in an offset dig position, their components extend outside the tracks and reduce their ability to dig in tight areas. The E50 is available with a long arm option that maximizes dig depth, reach and dump height clearance. Other popular options include pad-ready steel tracks, a hydraulic angle blade, second auxiliary hydraulics, hydraulic clamp and Hydraulic X-Change attachment mounting systems for quickly switching between the 16 attachments approved for use on the machines. For more information, visit www.bobcat.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 97

RELY On Expertise Air Compressors Generators Light Towers Light Compaction

Absolute Equipment 3038 Babcock Boulevard Pittsburgh, PA 15237 (412) 931-6655 (866) 931-6655 Fax: (412) 931-0993

Highway Equipment & Supply Co.

Liftech Equipment Companies

Route 309 Drums, PA 18222 (570) 788-1127

241 Paul Rd. Rochster, NY 14624 (585) 328-6380 (800) 339-9651 Fax: (585) 328-3622

4500 Paxton St. Harrisburg, PA 17111 (717) 564-3031 200 Burkholder Drive Ephrata, PA 17522 (717) 859-3132 122 Fritz Road Lock Haven, PA 17745 (570) 769-1070

4381 Walden Ave. Lancaster, NY 14086 (716) 684-9045 (800) 284-9580 Fax: (716) 684-9044

Penn Jersey Machinery

Trask-Decrow Machinery

120 Gordon Drive Lionville, PA 19341 (610) 363-9200

95 Main St. South Portland, ME 04106 (800) 287-1538 Fax: (207) 799-4063

61 County Line Road Somerville, NJ 08876 (908) 218-1919 1330 Hurfville Road Deptford, NJ 08096 (856) 227-6400 331 Edward Curry Ave. Staten Island, NY 10314 (718) 889-0105

Walter S. Pratt & Son 317 Columbia St. Rensselaer (Albany), NY 12144-2920 (518) 465-1549 Fax: (518) 465-0712

W.I. Clark 30 Barnes Industrial Park Rd. Wallingford, CT (203)265-6787 www.wiclark.com Brookfield, CT (203)775-1203 Franklin, CT (860)642-3500

Page 98 • June 23, 2010 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide

Topcon Receivers Track New Signal From GPS Satellite AUTHORIZED OEM DEALER Hitachi Excavators Hitachi Trucks Kawasaki Gehl Euclid Talbert Protec Waldon Perkins Hensley

YOUR PARTS SOURCE

Bucyrus Blades Cummins Baldwin Filters Expander Systems Allied/Rammer Esco Isuzu Hino Sennebogen Moxy

Dresser (new & non-OEM) Galion (new & non-OEM) Wabco Michigan Samsung IH Cat (non-OEM) Remanufactured Components ...plus many others

Visit our website: www.howelltractor.com 811 Sivert Dr. Wood Dale, IL 60191 800-866-1778 Fax: 630-595-3855

480 Blain Street Gary, IN 46406 800-852-8816 Fax: 219-977-4220

2770 May Road Peru, Ill 61354 800-342-6072 Fax: 815-224-2538

Topcon Positioning Systems (TPS) engineers have successfully tracked the new L5 signal transmitted from a U.S.-based GPS satellite. More than four years ago, Topcon announced it had receivers capable of tracking L5 signals. Topcon’s current GR-3 and NET-G3 receivers are L5-capable. The satellite began broadcasting the new signal April 10 and Topcon engineers successfully tracked the signal a few days later. The Air Force testing of the L5 signal is presently from one GPS satellite. Ivan Di Federico, TPS senior vice president, engineering, said, “It is expected to be several years before the L5 signal is operational. Topcon’s receivers are ready

SELL Used Heavy Equipment Parts SAVE ALL MAKES SAVE $$$ & MODELS $$$ We BUY Heavy Equip & Salvage Machinery We

New Aftermarket Parts

RUTLAND, VT 802-773-5926

to utilize the new signal once it is operating and when there are enough satellites transmitting the signals to improve positional quality.” Topcon receivers also can receive GPS/GLONASS L1/L2 as well as GPS L5. In an official announcement, the U.S. Air Force has cautioned the L5 signal is still under development and that quality and accessibility of the signal is not guaranteed. Di Federico said, “Tracking the L5 signal is a testament to the hard work, expertise and dedication of Topcon’s corps of engineers. Starting more than four years ago, our engineers made sure that when the L5 signal became active, our receivers could track it.” He said the L5 signal was received at the Topcon Technology Center in Moscow. The satellite signal was tracked over a threehour period at the highest satellite elevation. He said the signal was received with

the energy potential of 55 dBHz. Topcon engineers have been closely monitoring the progress of the new satellite from its launch, Di Federico said. “Any time new signals are available for use, it benefits our customers who depend on precise positioning information in the fields of surveying, civil engineering, construction, GIS, telematics and agriculture. “The more signals a receiver can pick up, the better the accuracy a customer can get on every job.” He said, “While tracking the signal confirms Topcon equipment’s ability to use the L5 signal when it is ready, we will continue to monitor the improvements to the GPS constellation and implement any adjustments needed to the firmware as additional new signals come online.” For more information, call 925/245-8300 or visit www.topconpositioning. com.

What’s going on in your company? We want to know!

WWW.CREANEQUIPMENT.COM

Would you like your company featured in CEG?

NEW CRANE & SHOVEL PARTS

If so, give us a call.

Check our inventory of machinery for sale at

TERRIFIC SAVINGS All Model Cranes, Draglines, Shovels, Clamshells & Backhoes; Lima; Insley; Bantam; Marion; P&H; Hopto; Hy-Hoe; Manitowoc; Lorain; Michigan; Koehring; Bay City; Gradall; John Deere; Northwest; Unit; American; Link-Belt; Bucyrus-Erie; Hein-Werner For Cable & Hydraulic Machines UNDERCARRIAGE and UPPER Buy Direct & Save Knowingly Never Undersold

A.C.R. PARTS DIV. 19615 Nottingham Road • Cleveland, OH 44110 (35 Yrs. One Location)

216/531-8000 Fax: 216/531-8852 e-mail AcrEquipment@cs.com www.acrequipment.com

Construction Equipment Guide 800/523-2200 or FAX 215/885-2910

editorial@cegltd.com

Construction Equipment Guide • Parts Section • www.constructionequipmentguide.com • June 23, 2010 • Page 99

PUMP REBUILDS ALL MAKES & MODELS OF MACHINES SAVE UP TO 60% • Komatsu • Cat • Deere • Hitachi • Full-Service Hydraulic Repair • Cylinder Repair • Turnkey Hydraulic Systems • Hydraulic System Integration • Professional Field Service • Full Machine Shop • Hard Chrome Plating • Large Seal Inventory • Pump Rebuilds and Exchanges ONE YEAR WARRANTY Call Ken or Marc

716/681-8474 Fax: 716/681-8514 4474 Walden Avenue Lancaster, NY 14086

CYLINDER REPAIR EXCHANGE www.fluidpowerservice.com

Page 100 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

The 2010 EZ Screen 1200XL, with a 5'x6' screen box, and a patented non-hydraulic screen drive. The EZ 1200XL works with a 1/2 to 2 yard loader. Now with a 20 Horsepower Deutz Diesel Engine ............................... .....................................................$39,500 plus freight Other Screens Available www.ez-screen.com • 866/745-5828 13-14 EB

Get ready for the Coming Season. Dump Trailers in stock. All sizes. Quality Products. 610/534-0700 Rick at Stephenson Equip/Keesler Div. 13-14 KU

“RACKS OF TRACKS!!!!” $1,500,000 Inventory of High Quality Rubber Tracks to fit over 2500 models of construction equipment. Up to 40% savings from OEM. $95 Next day delivery ...............Call Multi Machine Inc. 888-888-1248 13-14 RS

Excavator, Backhoe & Loader Buckets, New & used, over 200 in stock, also Grapples, Thumbs & other attachments

C&S Equipment Co. 609/267-0782

13-14 AP

SEE YOUR BARGAIN AD IN COLOR. O N LY $ 5 0 E X T R A 2009 IROCK Crusher RDS-15 Closed Circuit Crushing and Screening Plant. For more information call Sean Donaghy at 330/931-9595 13-14 EB

Lindig Topsoil Shredding & Screening Machine, App. 300 hours on Factory rebuilt Deutz, Air Cooled diesel $45,000 motor from Fleet Pride - excellent condition......$ (716) 691-8623 13-14 AP

FOR TWO INSERTIONS

Did this ad catch your attention? Color can work for you. Call Construction Equipment Guide 800/523-2200

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (Only one machine per Bargain Ad) and a maximum 17 word description plus contact and phone number. • Send Check for $95 with copy to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • The ad will run for two consecutive issues.

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Northeast States. For more information, call Constr uction Equipment Guide today at

800/523-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 101

EMPLOYMENT OPPORTUNITY JOIN OUR TEAM!

More Career Opportunities...

Nortrax, the largest retailer of John Deere Construction & Forestry equipment, has TWO (2) immediate openings for creative sales professionals who have the desire and skill to be successful in the competitive equipment sales arena. Sales Representative to be responsible for the sale, rental, and/or leasing of all new and used John Deere and “all-makes” equipment.

Service Manager – Pembroke, NH This position will be responsible for leading an experienced department while maintaining a schedule of shop and field work, assigning personnel to specific work orders, providing direction to Service Technicians in the repair of equipment, and growing a service business to ensure customers receive the most efficient and effective repair of their equipment as possible.

Watertown, NY AOR The qualified candidate will cover the counties of Jefferson, St. Lawrence, Lewis, and Hamilton. Northern Maine AOR The qualified candidate will cover the county of Aroostook

Customer Service Advisor – Westbrook, ME This position provides product support services and solutions to customers within designated territories. This position emphasizes product support sales and solution to designated customers while insuring maximum customer satisfaction levels and loyalty.

Qualified candidates will sell, rent, and lease new/used Construction & Forestry Equipment, negotiate prices/contracts, ensure delivery and maintain positive customer relationships. Excellent communication and time management skills are a must and knowledge of John Deere equipment is preferred. HS Diploma or equivalent is required while a college degree and 3-5 years for successful sales experience and education is preferred. Nortrax offers a complete benefits package including health, dental, and vision insurance, paid vacation, and 401-K. Candidates with a successful track record of heavy equipment sales experience may apply by sending their resumes with salary requirements to:

Qualified candidates should have a minimum of 3+ years job specific experience within our industry and demonstrate the ability to maintain strong customer service skills in a fast paced environment. Excellent communication and time management skills are a must and knowledge of John Deere equipment is preferred. HS Diploma or equivalent is required while a college degree or technical degree equivalent is preferred. Nortrax offers a complete benefits package including health, dental, and vision insurance, paid vacation, and 401-K. Interested candidates should reply with resume and salary requirements to the HR Department by emailing or faxing to:

shaun.polasky@nortrax.com

FAX: 813-635-2351

shaun.polasky@nortrax.com EEO Employer

EEO Employer

New Jersey equipment dealer is looking to hire for the following positions: Territory Sales Representatives Inside Sales/Equipment Manager Parts Counterman Service Manager/Service Writer Rental Coordinator/Rental Manager Product Support Representative We offer an excellent benefits package, including a 401K. EOE-A/A PLEASE SEND RESUME IN STRICT CONFIDENCE TO: hr@jesco.us or Fax: 908-753-7853

Surf the Internet

to the News, Equipment and all the information you need to keep up with the Construction industry @

www.construction equipmentguide.com

FAX: 813-635-2351

Page 102 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

HARTER EQUIPMENT, INC. 615 State Route 33 Millstone Twp, NJ 08535 732/446-7600 1-888-HARTER-1

w o r r a n your

NORRIS SALES COMPANY 1300 East Ridge Pike Plymouth Meeting, PA 19462 610/279-5777 Fax: 610/279-7973 1-800/457-RENT (7368)

OPTIONS Compact track loaders from Gehl perform best on soft, boggy terrain where other machines would sink. • Machine width measures 58” (without bucket), making it ideal for RSHUDWLRQ LQ FRQ¿QHG VSDFHV

Sicklerville, NJ 08081 856/740-1400 Fax: 856/740-1940 866/80-TOOLS (86657)

• Spacious and comfortable operator’s compartment • Heavy-duty undercarriage structure and rubber tracks for working in muddy or loose ground conditions

ADMAR SUPPLY COMPANY, INC. Latham, NY 12110 518/690-0750 Fax: 518/690-0757 1-888/613-1302 sales@admarsupply.com www.admarsupply.com

• SAHR (spring-applied, hydraulic-release) multidisc brakes respond quickly to hold the loader on any grade • Easy maintenance with tilt-back ROPS/FOPS and swing-out radiator

Vestal, NY 13850 607-798/0333 Fax: 607/798-0833 1-866/390-2367

• Pilot-operated joystick controls

Buffalo, NY 14217 716/873-8000 Fax: 716/873-8455 1-800/353-2367 Rochester, NY 14623 585/272-9390 Fax: 585/272-9165 1-800/836-2367 E. Syracuse, NY 13057 315/433-5000 Fax: 315/431-0548 1-800/293-2367

Dealer Imprint gehl.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 103

CLASSIFIEDS AERIAL LIFTS Manlifts All Makes & Models Rental, Parts, Service, Training Modern Equipment Sales & Rental 800/445-4381

AIR COMPRESSORS Compressors Ingersoll-Rand New & Used Parts Modern Equipment Sales & Rental 800/445-4381

Asphalt Rollers 2004 Cat CB534DXW, 832 hours ..........................$75,000 2005 Cat CS563E, 287 hours ..................................$75,000 2005 Cat CS563E, 1,778 hours ..................................$75,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Asphalt - Misc. Gehl: 1448 Plus, 1648 Plus LeeBoy: 8500, 1000 AEM Miller Drag Box Puckett: T650, T450, S240

Appraisal J D Balsarini & Associates Appraisal/Auctions Jim Balsarini 800/637-5614 www.jimbalsarini.com

ASPHALT EQUIPMENT Asphalt Pavers Leeboy Pavers

2003 Cat H160 ..........$55,000 2004 Cat H160 ..........$55,000

Leeboy Pavers Various Pavers in stock U.S. Municipal Supply, Inc. 800/733-3776

TERRA PIERCING TOOLS, DIRECTIONAL DRILLS Sales, service, rebuilt units. Bursters, Rammers, Compact Geothermal Drills, Shop Training National Distributor Fagan’s Lehigh Equipment 609/476-3481 800/458-5238 faganslehigh@comcast.net www.terra-trenchless.com

COMPACTION EQUIPMENT Vibratory Compactors

Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

1992 Bomag BW142, 3600 hours ..........................$14,500

2008 Stanley MB50EXS, 200JD/Hitachi Hammer, S&D bit, almost new............$44,000.

Misc. Compaction Equip.

JDE Equipment Co. 616-530-2000

Misc Attachments NEW & USED ATTACHMENTS

Call Dean Frey Equipment 973-875-7888

2004 CAT 836G, 7159 hours ................................$355,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

CRANES Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3208 Eagle PA 610/458-7054

G & H Services, Inc. Newton, NJ 973/383-3370 ————————————— Representing a full line of attachment manufacturers Jim Maillet 973-390-7392 Dick Clark 973-390-7390

2001 Case 550H LT, canopy, excellent condition, 2000 hrs .. ..................................$29,500.

Trenchless Technology

Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

WE KNOW ATTACHMENTS!

U.S, Municipal Supply Inc. 610/292-9450

BORING EQUIPMENT

ATTACHMENTS

Variety of Pavers in Stock Ask About Our Financing Specials!!

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

NEW & USED ROLLERS

Hammers

APPRAISALS

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

Financing Available Call Ron 413-531-8119

AIRMAN COMPRESSORS Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion.

Crane Inspections Specializing in Truck Mounted Cranes Modern Equipment Sales & Rental 800/445-4381

CRAWLER TRACTORS

Medico Industries 570/825-7711 2007 John Deere 450J, LGP, ROPS, hydro trans., 124’’ 6way blade, very good condition, 1072 hours ..............$57,375. 2005 John Deere 650J, LGP, ROPS, hydro trans., 128’’ screen and sweeps, good condition, 1806 ..............$57,800. Industrial Tractor Co. Inc. 843-572-0400 2004 4551 2004 3406

Cat D6RXLII, hours ..............$139,000 Cat D8RII, hours ..............$369,300 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

EXCAVATORS Hydraulic Excavators 2001 Cat 311CU, cab w/air, thumb, 2800 hours......$38,000. 2000 Hitachi EX 135UR, 4085 hours, blade ..............$29,500 2006 Yanmar VIO75A, 788 hours, blade, aux. hyd .......... ..................................$39,500 Call Dean Frey Equipment 973-875-7888 Long Reach Excavator Front Ends High Reach Demolition Front Ends Excavator Material Handlers Front Ends

2006 Cat 303.5CCR, 698 hours ..................$39,900 2005 Cat 330CL, 2,366 hours ..............$199,000 2003 Cat 345BL, 4,941 hours ..............$199,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729 2009 Liugong 922 with hydraulic thumb, new condition, 700 hrs ............$130,000.

Mini Excavators 2006 Komatsu PC50MR-2, 1600 hours ................$28,000. Call Dean Frey Equipment 973-875-7888 2003 Kubota KX-161-3, cab w/AC, rubber tracks, 2 buckets, hyd. coupler, hyd. thumb, radio, good condition, 2700 hours .... ..................................$30,000. Farm-Rite Inc. 908/625-0697 1996 Takeuchi TB025, rubber track, ROPS, 18’’ PIM bucket, aux. valve, fair condition, 2670 hours ........................$11,900. 2004 John Deere 35CZTC, rubber, cab, heat, 7760 lbs, aux. hyd., 24’’ bucket, quick attach, nice condition, 1734 hours ........................$25,500.

Call Percy Ransome Phone: 856-608-6999 or Cell: 215-350-1165 Fax: 856-608-7999

Modern Equipment Sales & Rental 800-445-4381

NH Construction Equipment New & Used Parts & Service

Modern Equipment Sales & Rental 800-445-4381

Gradall/Lull Sales, Service, Training Modern Equipment Sales & Rental 800/445-4381

Rough Terrain Forklifts 1997 Lull 844C-42, 5500 hours, 8000# lift, 42’ reach .... ..................................$18,000. Call Dean Frey Equipment 973-875-7888

GENERATORS Generators & Gen Sets For Sale or Rent All Makes and Models Modern Equipment Sales & Rental 800/445-4381 For Sale or Rent All Makes & Models Modern Equipment Sales & Rental 800/227-2525 FOR RENT Caterpillar Generator Sets 15KW to 1750KW Day, Week or Month with trailer, fuel tank, enclosure Alban Engine Power, Inc. Baltimore 301/796-8000 Washingotn DC 621-1424

HYDRAULIC HAMMERS Breakers

Erb & Henry Equip Inc 610/367-2169 NH Construction Equipment New & Used Parts & Service

longreachhighreach@gmail.com www.longreachhighreach.com

Industrial Forklifts

207-834-3171

PLUS Stick Extensions In Stock, 8’-12’-16’ & 20’ Complete Package with Bucket

Crawler Tractor

FORKLIFTS

FORESTRY EQUIPMENT Logging Equipment 2010 Liugong 922, base with 453 ProPac Delimber, new condition, 700 hrs......$280,000 207-834-3171

ALLIED SALES/RENTALS Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

LANDSCAPE EQUIPMENT Misc. Landscape Equipment Gehl Skid Steer Loaders, Excavators, Track Loaders, Attachments! Rent or Purchase Norris Sales Company 610/279-5777

Page 104 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2001 Kubota L48TL, 4WD, hydro loader, 72’’ bucket, ROPS, good condition, 1850 hours ..........................$19,500. Erb & Henry Equip Inc 610/367-2169

Track Loaders Backhoe Loaders 1994 Deere 310D, 4WD, Estick ............................$20,500 1987 John Deere 310C, 4x4, E-stick, cab ................$16,000. Call Dean Frey Equipment 973-875-7888 Case 580SK, ROPS, 4 WD, Extendahoe, 300 bucket, very good condition, 2400 hours ....................................$19,350. A G Allebach Inc. 215-368-7707 NEW & USED BACKHOE LOADERS Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054 2007 John Deere 310J, ROPS, turbo, 4x4, GP loader, 24’’ bucket, very good condition, 71 hours ..........................$58,635. 2007 John Deere 310J, ROPS, 4x4, power S trans., GP front bucket, 24’’ BH bucket, very good condition, 55 hours ........ ..................................$57,200. 2009 John Deere 310SJ, ROPS, turbo, 4x4, PS trans., P controls, ext. hoe, GP loader bucket, 24’’ BH bucket, excellent condition, 38 hours............ ..................................$73,700. 2006 John Deere 310SG, ROPS, turbo, 4x4, PS trans, P control, ext. hoe, GP bucket, 24’’ BH bucket, excellent condition, 384 hours ..........$57,300. 2004 John Deere 410G, ROPS, 4x4, turbo, P controls, PS trans, ext. hoe, GP bucket, 24’’ BH bucket, good condition, 2862 hours ................$39,500.

2000 John Deere 270 II, ROPS, 8500 lb., single speed, 84’’ bkt, 21.3 gpm, very good condition, 776 hours ..$21,500. 2002 Bobcat S300, cab w/air, bucket, hi-flow, 25 hp, 300 lb cap., good condition, 2144 hours ..........................$24,000. Erb & Henry Equip Inc 610/367-2169 2007 JCB 180T, canopy model with Servo Controls, GP bucket, set of forks/ frame 48’’. Pictures available, mint condition, 10 hours ..........................$28,500. Farm-Rite Inc. 908/625-0697 2003 Case 60XT, 4WD, 6600 lbs, 72’’ wide, diesel engine, aux. hyd., new tires, very good condition ....................$16,200. A G Allebach Inc. 215-368-7707

Wheel Loaders NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381 2006 Cat 904B, 3,456 hours .. ....................................$29,000 2005 928GZ, 2519 hours ........ ....................................$87,300 2006 Cat 972H, 3,180 hours .. ..................................$229,000 1998 Cat 990 ............$599,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729 1972 Cat 920 Wheel Loader, forks and bucket.........$12,900.

MISCELLANEOUS

ON SITE A/C REPAIRS AND INSTALLATIONS

Miscellaneous Parts

Misc

Construction Equipment and Heavy Truck

USED TRAMAC HAMMER PARTS

Eastern PA and surrounding states.

Quality used Tramac Parts for 140, 625, BRV32, or 501 hammers

UTILITY VEHICLES 2004 John Deere HPX 4x4, diesel, front bumper, electric lift, like new, 141 hours ......$8,550. 2005 John Deere HPX 4x4, electric lift, good condition, 750 hours ............................$6,900.

PARTS Erb & Henry Equip Inc 610/367-2169 NEW PARTS Hyundai - Mustang Okada - Sakai Yanmar Call: John Stevens or Jeff Brooks G & H Services, Inc. 973/383-3370 Fax: 373/383-5756 1987 Cat 963, s/n 21Z1370, Balderson coupler, S/D bucket, forks, new U/C, engine, HPCU C/P ............................$34,800. 1995 Cat CP563C Padfoot Roller, excellent shape, 50% rubber ........................$29,600. 1990 Dresser 6200, s/n 4230, aux. hyd., JRB coupler, 42’’ magnet (hyd)..............$71,200. 1996 Hyundai 210LC, s/n 10025, 50’ long front, excellent shape, aux. hyd..........$69,800. Bob Harrell 609-561-7702

Service 250 Hour Service Specials on Skid Loaders & Telescopic Material Handlers Now in PA & NJ!!!

Call John 607-655-5550

Call for Details

2005 Multi-One SL30D, 32 HP Mini Wheel Loader, 2300 lbs, 48’’ bucket, good condition ...... ..................................$15,000.

Norris Sales Company 610/279-5777

Erb & Henry Equip Inc 610/367-2169

Track Loaders 1980 Cat 941B, 4-in-1 bucket, cab, 1 owner ..............$11,000.

We Service What We Sell! Warranty, Maintenance and More! Heavy Equipment, Light Equipment, Hand Tools & Gas Detectors Norris Sales Company 610/279-5777

Industrial Tractor Co. Inc. 843-572-0400

Call Dean Frey Equipment 973-875-7888

LINE BORING ON-SITE!

Skid Steer Loaders

2006 Cat 953C, 1004 hours .. ..................................$135,000 Cat 953C, 3577 hours ............ ..................................$115,000

Construction Equipment Industrial & Heavy Truck

2005 Takeuchi TL130, s/n 21303600, rubber tracks, 4-in-1 bucket, good condition, 2100 hours ..........................$22,000. Al Preston’s Garage 203/924-1747

Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Doylestown Services Dave Wallace 215-470-0870

Eastern PA and surrounding states. DOYLESTOWN SERVICES Dave Wallace 215-470-0870

Plasterer Equipment Co. Inc. 800/225-4001 or e-mail lebanon@plasterer.com

Crane Parts TEREX PARTS Modern Equipment Sales & Rental 800/445-4381

Tractor Parts NEED CASE DOZER TRANSMISSION PARTS? We supply new & used transmission and differential parts for Terratrac GT, 200, 300 Series. Case 310, 350. SERVICES AVAILABLE: Transmission rebuilding, steering band relining. Full line of Oliver-Cletrac parts stocked. Zimmerman Oliver-Cletrac Ephrata, PA 717-738-2573 Fax: 717-733-3529 www.olivercletrac.com

Undercarriages NEW UNDERCARRIAGE PARTS Caterpillar D3, D3B, D3C, D4C, 931...6.125 Pitch 6S8800MT Link Assy., (2), 36 section, dry, master pin, 9/16’’ bolt........................$849.00 Ea. 6S605MT Link Assy., (4), 36 section, dry, split master, 9/16’’ bolt........................$874.00 Ea. 6S9066MT Link Assy., (4), 36 section, SALT, split master, 9/16’’ bolt ..........$1,099.00 Ea. 6Y1339MT Link Assy., (4), 36 section, SALT, split master, 9/16’’ bolt ..........$1,105.00 Ea. 3T6705MT Link Assy., (2), 37 section, SALT, split master, 9/16’’ bolt ..........$1,150.00 Ea. Komatsu D30A, D31A, D31B, D37E, D31S, D31P... 6.0126 Pitch TR1103211292 Track Pad, (118), 14’’ single grouser, 14mm bolt................$7.39. Ea. TR1113000260 Top Roller (2), complete w/shaft....$82.00. Ea. TR1113000281 Bottom Roller (9), double flange .................... ............................$103.00. Ea. G & H Services, Inc. 973/383-3370 973/390-7394 Cell Fax: 373/383-5756

Manitowoc - Grove National Crane - Terex P&H - Lorain Koehring - JCB Doosan - Case Atlas Copco - Genesis Leeboy

Hydraulic Excavators, Wheel Loaders, Crawler Loaders, Crawler Dozers, Compaction Equipment, Hammers, Motor Graders, Screens & Conveyors, Articulated Haulers, Backhoe Loaders, Elevating Scrapers, Loadalls. Midlantic Machinery Co. Hatfield PA 215/822-0145 Harrisburg PA 717/652-3190 Wilkes-Barre PA 717/824-9891 Baltimore MD 410/247-2100 Delmar DE 302/846-0224 Construction & Industrial Equipment Rentals Compaction, Excavating, High Lifts, Traffic Control, Safety, Loaders, Landscaping Norris Sales Company 610/279-5777

Hoffman Equipment 1-800-4-HOFFMAN Piscatawy, NJ Williamstown, NJ Medord, NY Bronx, NYC Marlboro, NY

Boxer 532DX Mini Skid Steer Stand On Auger, Bucket, Trencher

JOHN DEERE USED PARTS All Makes In Stock! Nationwide Availability 1-800-344-3205 Industrial Tractor Co., Inc. Jacksonville, FL VISA/MC

Daily - Weekly - Monthly Competitive Rates

RENTALS Rental Construction & Equpment & Supplies for the “Professionals” Daily - Weekly - Monthly & Long Term Rentals Available Stone, Wacker, Honda, Gehl, JLG to name a few ..... Norris Sales Company 610/279-5777 DAILY-WEEKLY-MONTHLY Long Term Rentals: Loader Backhoes, Wheel Loaders, Crawler Dozers, Excavators, Mini Excavators, Compact Wheel Loaders, Articulated Trucks, Skid Steer Loaders, Trenchers, Cable Plows, Rollers, Hydraulic Hammers, Landscape Attachments & More Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

Erb & Henry Equip Inc 610/367-2169 www.norrissales.com

Mixers, Generators, Arrow Borads, Compaction, Excavators, Loaders! Now in PA & NJ Norris Sales Company 800/547-RENT (7368) 610/279-5777 Construction Equipment Rentals Modern Equipment Sales & Rental 800/445-4381 Stone, Wacker, MBW, Diamond Products, Honda, IR, AGL, Sky Trak, JLG, JoBox, DeWalt, Stihl, Imer Rentals, Sales, Service Mon-Fri 6:30 am - 5:00 pm Sat 7:00 am - 12:30 pm Norris Sales Company 610/279-5777

ROAD MAINTENANCE Sweepers 2005 Lay-Mor 6HC, 3 wheel, self propelled, 6’ water system, ROPS, engine shutdown system, very good condition, 400 hours ..........................$12,600. 2003 Lay-Mor 6HC, very good condition, 3 wheel self propelled, 6’ broom with water system, diesel engine, very good condition, 630 hours ..$11,400. A G Allebach Inc. 215-368-7707

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 105

2002 Rosco SweepPro, 8’ w/ poly brush, 85hp Cummins, new condition ..............$29,995 U.S. Municipal Supply, Inc. 800/733-3776

NEW Rosco RB-48, Enclosed cab. New Units for Sale or Rent. U.S. Municipal Supply, Inc. 800/733-3776 NEW Johnston-Allianz MST New High Dump Chassis Mount Sweeper! U.S. Municipal Supply, Inc. 800/733-3776 Johnston-Allianz M7 350 High Side Dump Chassis Mount Sweeper! Call for Demonstration U.S. Municipal Supply, Inc. 800/733-3776

SCRAPERS Motor Scrapers 1998 Cat 627F, 9,740 hours .... ..................................$299,000 1998 Cat 627F, 10,307 hours .. ..................................$299,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

TRAILERS Low Bed Trailers RENT LOW BEDS 35 & 50 ton Rogers Weekly & Monthly Stephenson Equipment/ Keesler Division 610/534-0700 Located @ I-95 & RT420 Exit 9-B Propsect Park, PA

Miscellaneous Trailers 1972 Hyster 20 Ton Tilt Trailer Air brakes 10:00x15 radial tires, REDUCED FOR QUICKSALE!!! $500. Call Jim Clark 516-578-1176

NEW & USED TRAILERS

OSHA Approved Safety Seminars

Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

Fall Protection, Confined Space, Trenching & Shoring, First Aid/CPR, Backhoe Safety, Industrial Forklift $95 Each

FULL LINE GENERAL Eager Beaver Trailers in stock

Call for a schedule Norris Sales Company 610/279-5777

Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

TRENCHER

TRAINING

NEW & USED TRENCHERS

Crane Operator Rigger Signal Person Stephenson Equipment provides training at our locations in Harrisburg, PA and McDonald, PA or we will provide training at your PA company. Visit www.stephensonequipment.co m Click on NCCCO Training or call 1-800-325-6455 x1154

Safety Training Mask Fitting, First Aid & CPR, Forklift Safety, Fall Protection, Confined Space ............$95.00 Call Dave Norris Sales Company 610/279-5777

One Year $65

(within United States & Puerto Rico Only)

CARDMEMBER’S NAME _________________________________________________________ COMPANY NAME _______________________________________________________________

Are your operators compliant with Federal Standards, OSHA, ANSI, ISO?

CRANE OPERATIONS TRAINING NCCCO Certification

SUBSCRIPTIONS:

Vibromax 1500-33, s/n 4202108, remote trench roller, full warranty, pictures available, good condition, 50 hours ........ ..................................$24,500. Farm-Rite Inc. 908/625-0697

For information, pricing or reservations: Call 1-800-223-3827 www.moderngroup.com All prices include Trainer, travel and material NO HIDDEN COSTS

Get an edge on your competition! Construction Equipment Guide Northeast Edition subscribers are the best informed about construction news, construction equipment, sales, auctions, equipment prices, trends and changes in the industry and activities of its people. Call Toll Free! We now accept Visa, Mastercard & American Express!

Trenchers

Operator Training

MODERN GROUP offers training for: - Front-end Loaders & Backhoes - Aerial work platforms (AWP) (Boom & Scissor Lifts) - Rough Terrain Forklifts (Gradall, Lull, JCB) - Skid Steer Loaders

Subscribe to CEG today...

STREET____________________________________ PHONE NO. ________________________ CITY ______________________________________STATE _______ ZIP ________________ TYPE OF BUSINESS _____________________________________________________________

Check Enclosed

VISA

MASTERCARD

American Express

CARD NUMBER

EXP. DATE (Mo./Yr.)

Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

SIGNATURE OF AUTHORIZED CARDHOLDER

TOLL FREE ®

1-800/523-2200 FAX 215/885-2910

470 Maryland Dr. • Ft. Washington, PA 19034 Email: circulation@cegltd.com

TRUCKS Bucket Trucks ELLIOTT BUCKET TRUCKS Modern Equipment Sales & Rental 800/445-4381

Classified...2 Insertions...95¢ Per Word

Use the form below to place a classified ad in the Construction Equipment Guide. It could bring the inquiry for which you are looking.

One Word HEADING (Category to place listing):

Each

Block

Misc Trucks 2004 Cat 735, 4,035 hours...... ..................................$249,000 2005 Cat 735, 3,738 hours...... ..................................$269,000 2006 Cat 740, 3,320 hours...... ..................................$305,000 1994 Cat D350D, 20,412 hours ..........................$49,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

WATER EQUIPMENT Water Wagons

CLASSIFIED RATES: 95¢ Per Word. Minimum $30.00 (30 words or less). Ad runs for two insertions - no changes in second insertion. Initials count as separate words. Telephone numbers including Area Code count as one word. Please indicate the appropriate heading you wish your ad to be listed under. Payment must be made in full for your ad to run. For just an additional $20 your ad can be posted on our online searchable database for 30 days - use your credit card or send payment to Construction Equipment Guide. CARD MEMBER’S NAME _________________________________________________COMPANY NAME ___________________________________________________ STREET______________________________________________________________________PHONE NO. _________________________________________________ CITY _______________________________________________________________________STATE ___________________________ ZIP __________________________

1996 Volvo 5500 Gals., Automatic 2 Available $39,000. 1994 GMC 2800 Gals., Automatic $15,000 Richard Pedroni 800-642-9191 Pedroni Fuel Company

Check Enclosed

VISA

MASTERCARD

AMERICAN EXPRESS

CARD NUMBER

EXP. DATE

SIGNATURE OF AUTHORIZED CARDHOLDER

TOLL FREE 1-800/523-2200 FAX 215/885-2910 470 Maryland Drive • Fort Washington, PA 19034 Email: sales@cegltd.com

Page 106 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. CAT D7R WITH RIPPER AND 3306 ENGINE UNDER 9000 HOURS Contact: NATACHA Phone: 0033-698-17-4467 Email: natacha@abnequipment.com –––––––––––––––––––––––––––––––– CATERPILLAR PIPELAYERS I WANT TO BUY CATERPILLAR PIPELAYERS MODEL 594, 583, 572, 571 Contact: TONY THOMAS Phone: 818-956-5231 Fax: 818-956-5239 Email: tonythomas@pacificcranes.com –––––––––––––––––––––––––––––––– CAT 992D CLEAN & WORK READY GOING TO NE Contact: RICHARD Phone: 603 828-6100 Email: cmiequip@yahoo.com –––––––––––––––––––––––––––––––– ATLAS COPCO D711 BLASTHOLE DRILL I WANT TO BUY ATLAS COPCO D7-11 BLASTHOLE DRILLS. Contact: TONY THOMAS Phone: 818-956-5231 Fax: 818-956-5239 Email: tonythomas@pacificcranes.com –––––––––––––––––––––––––––––––– ROTARY PILING RIG Contact: SUNIL PATEL Phone: 91-22-26736947 Fax: 91-22-26732978 Email: spatel@indianabuild.com –––––––––––––––––––––––––––––––– KUBOTA KH28 FOR PARTS FINAL DRIVES COMPLETE OR GEARS MAIN PROBLEM PN 68241-13410. WOULD TAKE A COMPLETE MACHINE OR WHAT YOU HAVE LEFT OF ONE 1984 KH-28 KH-170 IS THE SAME. Contact: BOB ZUZNIS Phone: 845 221 2603 Fax: 845 221 2603 Email: sellerrez32@aol.com –––––––––––––––––––––––––––––––– KOMATSU WA3803 | EROP WITH AIR. WORK READY CONDITION. GP BUCKET. Contact: PATRICK KELLY Phone: 800-403-2263 Fax: 716-891-4346 Email: pkelly@hrparts.com –––––––––––––––––––––––––––––––– CASE LOADER BACKHOE 580L OR 580SL • CASE LOADER BACKHOES 2 WHEEL DRIVE 580L OR 580SL ENCLOSED CAB, REASONABLE PRICE GOOD COND! Contact: FRANK ZACCARINO Phone: 973-650-9268 Email: zacc1@optonline.net –––––––––––––––––––––––––––––––– NEED TO BUY A RIPPER FOR 8230B TEREX DOZER Contact: JAKE DATES Phone: 315-879-0806 Email: microracer68@yahoo.com –––––––––––––––––––––––––––––––– MORBARK MODEL 13 OR 15 IN NEED OF REPAIR • MORBARK 13 OR 15 WITH BAD ENGINE OR IN NEED OF REPAIR Contact: TIM LEWANDOWSKI Phone: 724-887-9375 Fax: 724-887-4899 Email: lewequip@gmail.com ––––––––––––––––––––––––––––––––

KOMATSU LOADER, WA100, WA150, WA200 • IF YOU HAVE KOMATSU LOADER, LIKE WA100, WA150, WA200, WA250 ETC. PLEASE EMAIL, PLEASE DO NOT PUT YOUR MACHINE ON AUCTION, SELL YOUR MACHINE TO ME, I CAN PAY 100% IN ADVANCE IF YOUR MACHINE IS GOOD Contact: IBRAHIM Email: ibrahimmashali@gmail.com –––––––––––––––––––––––––––––––– LOADER BACKHOE Contact: FRANK HORAN Phone: 732-674-2095 Fax: 856-697-4842 Email: fhoran@tricoequipment.com –––––––––––––––––––––––––––––––– BUCKET | NEED A HD ROCKET BUCKET TO FIT A KOMATSU PC800-8 78-84" WIDE 6-1/2-7-1/2 CU YD. NEED ASAP Contact: LARRY LEISTIKOW Phone: 608-438-1783 Fax: 608-655-1300 Email: lleistikow@yahoo.com –––––––––––––––––––––––––––––––– CATERPILLAR MOTOR GRADER 140G • PLS SEND WHOLESALE, UN-ADVERTISED UNITS OFFERS FOR 140GS WITH REAR RIPPER IN 72V SERIES, YEAR 1985 TO 1995. Contact: ATHER A. SIDDIQUI Phone: +92-333-2240692 Email: ather.cat@gmail.com –––––––––––––––––––––––––––––––– KOMATSU PC95 OR EQUIVLENT • CLEAN & WORK READY Contact: RICHARD Phone: 603-828-6100 Email: cmisold@yahoo.com –––––––––––––––––––––––––––––––– 30 FOOT ALUMINUM END DUMP TRAILER • LOOKING FOR OLDER MODEL 3032 FT. FRAME TYPE ALUMINUM END DUMP TRAILER. Contact: MIKE PIEPER Phone: 319-372-2276 Fax: 319-372-2277 Email: pi2279@yahoo.com –––––––––––––––––––––––––––––––– TERRAMITE T5C FRAME FRAME FOR SPECJ1040 MARCH 1997, 6000LB Contact: DAVID PARSONS Phone: 304-733-5098 Email: matt2101@verizon.net –––––––––––––––––––––––––––––––– D8H WITH 4BARREL RIPPER Contact: PAUL T. REEVES Phone: 336-363-4110 Email: paultreeves@skybest.com –––––––––––––––––––––––––––––––– PC300LC5 KOMATSU PC300-5 OR PC300-7,PC400-5 PC400-7 PC228US-3 Contact: JIM Phone: 626-443-2443 Fax: 626-443-4674 Email: info@maxland.com –––––––––––––––––––––––––––––––– MORBARK 13 OR 15 CHIPPER LOOKING FOR A CUTTER HEAD FOR A MORBARK 13 CHIPPER Contact: TIM LEWANDOWSKI Phone: 724-887-9375 Email: lewequip@gmail.com | ––––––––––––––––––––––––––––––––

KUBOTA 6100 FRONT END LOADER FRONT END LOADER FOR 1981 KUBOTA 6100, DID SEE A MODEL NUMBER OF B 219 MANUFACTURED BY OTHER THAN KUBOTA Contact: SCOTT WEST Phone: 330-958-1426 Email: howiserinfree@yahoo.com –––––––––––––––––––––––––––––––– 2007 CATERPILLAR D6N LGP LOOKING FOR A 2007 CATERPILLAR D6N LGP EQUIPMENT. Contact: DAVE Phone: 813-464-2163 Email: shaba13@gmail.com –––––––––––––––––––––––––––––––– BOB CAT GLASS DOOR S185 Contact: WAYNE Phone: 1-810-724-6131 Email: waynesworldllc@yahoo.com –––––––––––––––––––––––––––––––– FORK FRAME AND FORKS JCB WHEEL LOADER LOOKING FOR JCB QUICKHITCH COMPATIBLE FOR A 426 HT NEED FORK FRAME AND FORKS Contact: DANIEL PETERS Phone: 920-471-4296 Fax: 920-491-1027 | Email: danp@go-jcb.com –––––––––––––––––––––––––––––––– REGULATEUR DE DEBIT POUR CHARGEUR SUR PNEU O ET K Contact: KEFIF Phone: 00213661200428 Fax: 0021341468376 Email: smci_maghreb@yahoo.fr –––––––––––––––––––––––––––––––– CATERPILLAR AND KOMATSU PIPELAYERS WE WANT TO BUY CATERPILAR 572G, 583K, 594H PIPELAYERS ALSO LOOKING FOR KOMATSU D355C PIPELAYERS. NO BROKERS PLEASE. WE ONLY BUY FROM END USER. Contact: TONY THOMAS Phone: 818-956-5231 Fax: 818-956-5239 Email: tonythomas@pacificcranes.com ––––––––––––––––––––––––––––––––

JIB POLE I HAVE A TEREX 41M BUCKET LIFT ON MY TRUCK. I NEED THE FIBERGLASS JIB POLE PART # 0454002 Contact: DAVID LARAIA Phone: 860-250-6659 Fax: 860-432-0641 Email: dlaraia@cox.net –––––––––––––––––––––––––––––––– HYDRAULIC EXCAVATOR MACHINE WITH LESS THAN 3000 HRS. 70 LONG STICK AND 2 YD BUCKET. EMAIL PICTURES, LOCATION AND PRICE Contact: BEAUFORD MULLINS Phone: 260 497 0500 Fax: 260 490 8217 | Email: beauford@kortebros.com –––––––––––––––––––––––––––––––– CAT, KOMATSU, VOLVO, KAWASAKI, CALL US! WE WANT TO BUY YOUR EQUIPMENT! WE BUY CAT, KOMATSU WHEEL LOADERS, EXCAVATORS MOTOR GRADERS & DOZERS WE ARE LOOKING FOR ALL SIZES OF CAT & KOMATSU WHEEL LOADERS ANY YEAR OR MODEL. WE ALSO BUY CAT & KOMATSU MOTOR GRADER, EXCAVATORS AND DOZERS. WE ALSO BUY ANY/ALL PARTS MACHINES. CALL SCHEER BROTHERS, LLC ASK FOR RHONDA OR DAVE Contact: RHONDA SCHEER Phone: 610-544-3399 OR 484-326-9494 Email: rhonda@scheerbrothers.com –––––––––––––––––––––––––––––––– CRAWLER CRANE NEED TO USED CRAWLER CRANE MANITOWOC 18000 - 600 TON, YEAR 2007, COLLAPSED IN SOME ACCIDENT. IF AVAILABLE, PLEASE SEND OFFER WITH PHOTO AND QUOTE. Contact: TRANG KIM MINH Phone: 84-8-38405292 Fax: 84-8-38980845 Email: trangkimminh@gmail.com –––––––––––––––––––––––––––––––– LAY-MOR BROOM 6HB, EXCELLENT CONDITION Contact: A.H. CORNELL Phone: 215-343-1830 ––––––––––––––––––––––––––––––––

To Consign Equipment to Alex Lyon’s Auctions 856/429-9149

856/429-9149

Fax# 856/429-4267 • Cell# 609/457-2104

www.ecommercics.com/stuharris/

NEED TO BUY 3 BULLDOZER JD 2007 AND MOORE ENC CAB WICH Contact: JEAN MAURICE BOUTIN Phone: 1 450 346 8975 Email: jeanmauriceboutin@videotron.ca –––––––––––––––––––––––––––––––– CAT D5 LGP/DEERE 650H LGP ETC FROM CONTRACTOR Contact: KEVIN SANSALONE Phone: 856-297-4758 Fax: 856-362-5602 Email: kevin@sansaloneexcavating.com –––––––––––––––––––––––––––––––– CONETRACKW/ONBOARD 6X20 3 DECK SCREEN. DESCRIBE WHAT YOU WANT. Contact: RICHARD Phone: 603 828-6100 Email: cmisold@yahoo.com –––––––––––––––––––––––––––––––– T600D VERMEER TRENCHER OR TRACK PARTS Contact: CHUCK Phone: 248-474-1200 Fax: 248-474-7954 Email: noviwall@yahoo.com –––––––––––––––––––––––––––––––– JCB 1400 JCB 30 OR 36 INCH BACKHOE BUCKET AND FRONT BKT FORKS W/ROD, 5 OR 6 FT. LONG. Contact: DONNIE TURNER Phone: (731)-609-8454 Email: dntkmt50@comcast.net –––––––––––––––––––––––––––––––– 1998 TO 2002 KOMATSU PC400LC6. MACHINE MUST BE IN THE U.S AND WHOLESALE PRICING PLEASE. Contact: RANDY REECE Phone: 770-966-9056 Fax: 770-966-9035 Email: randy@globalequipmentexporters.com –––––––––––––––––––––––––––––––– EXCAVATOR EXTEND ARM Contact: DOLORES CARD Phone: 570-224-4410 Fax: 570-224-4940 Email: damtres1@ptd.net –––––––––––––––––––––––––––––––– CATERPILLAR AP1050 ASPHALT PAVER. WE ARE LOOKING FOR FEW CATERPILLAR AP1050 ASPHALT PAVERS. WE PAY TOP DOLLAR FOR YOUR PAVERS. PLEASE OFFER US IF YOU HAVE ANY FOR SALE. WE ALSO COULD USE BARBER GREEN BG245 Contact: TONY THOMAS Phone: 818-956-5231 Fax: 818-956-5239 Email: tonythomas@pacificcranes.com –––––––––––––––––––––––––––––––– SCHRAMM T685WS ROTADRILL, WANT TO BUY SCHRAMM T685WS ROTADRILL, IT MUST HAVE QTTA CUMMINS MOTOR (700 HP) AND SULLAIR COMPRESSOR 1150 CFM 500PSI. T685WS ROTADRILL Contact: TONY THOMAS Phone: 818-956-5231 Fax: 818-956-5239 Email: tonythomas@pacificcranes.com –––––––––––––––––––––––––––––––– JOHN DEERE 160C OR COMPARABLE. LESS THAN 10 YEARS OLD, WILL CONSIDER COMPARABLE UNIT Contact: KIRK Phone: 888-545-1187 Fax: 888-545-2187 Email: kirks@acgcapital.com ––––––––––––––––––––––––––––––––

CASE 621C. NEW OR USED 5 YARD BUCKET Contact: GREG HEINTZMAN Phone: 219-787-1341 x112 Fax: 219-787-5020 Email: gheintzman@scrapmetalservices.com –––––––––––––––––––––––––––––––– HSG AUCTIONS. WE ARE A NEW HEAVY EQUIPMENT AUCTION COMPANY LOCATED ON THE MS GULF COAST. WE ARE LOOKING FOR SEVERAL MACHINES TO AUCTION. AUCTION IS OPEN TO THE PUBLIC. DEALERS IN OUR AREA, PLEASE CONTACT US. WWW.HSGAUCTIONS.COM Contact: GULFPORT, MS Phone: 228-832-0034 Fax: 228-832-0734 Email: info@hsgauctions.com –––––––––––––––––––––––––––––––– VOLVO EC290B, A/C TEMP. CONTROLLER Contact: PHILLIP Phone: 850-944-0112 Email: mcdirt@bellsouth.net –––––––––––––––––––––––––––––––– FRONT GRILL FOR KUBOTA M8580 LOOKING FOR THE FRONT (REMOVEABLE) GRILL WITH HEADLIGHTS FOR A KUBOTA TRACTOR M8580. Contact: JEFF RENNIE Phone: 740-594-1928 Fax: 740-554-7720 Email: jjrennie@embarqmail.com –––––––––––––––––––––––––––––––– 4" MOLE WITH REVERSE Contact: KEVIN SANSALONE Phone: 856-297-4758 Fax: 856-362-5602 | Email: kevin@sansaloneexcavating.com –––––––––––––––––––––––––––––––– PARTS FOR LIEBHER PR 751 PUMP SPLITER BOX Contact: RON Phone: 989-723-6084 Fax: same Email: rfuoss@peoplepc.com –––––––––––––––––––––––––––––––– BLAWKNOX M450 PAVERS M-450 TRACK PAVERS RUNNING, OR PARTS MACHINE. Contact: FRANK SUMMA Phone: 570-499-7580 Email: twinforces@comcast.net –––––––––––––––––––––––––––––––– FELCO WHEEL COMPACTION BUCKET. LOOKING FOR A FELCO WHEEL COMPACTION BUCKET FOR A CAT 322 EXCAVATOR Contact: CODY Phone: 307-682-4346 Email: cody.thies@earthwork.us.com –––––––––––––––––––––––––––––––– KOMATSU PARTS • NEED X-ROD PART#707-58-370 Contact: ROBERTO J PALACIOS Phone: 786-287-7056 Fax: 305-573-7038 Email: cargoawaycorp@live.com –––––––––––––––––––––––––––––––– FULL SIZE EXCAVATOR BUCKET • I NEED A 24 INCH BUCKET FOR A VOLVO EXCAVATOR Contact: NINO Phone: 412-865-6935 Fax: 724-695-3271 Email: cnexcavation@verizon.net ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 107

KIOTI Names New Senior Director of Finance, CFO KIOTI Tractor, a division of Daedong Industrial Company Ltd, has promoted Michael Boucher to senior director of finance and chief financial officer. Boucher was most recently the company’s director of finance. Boucher’s promotion is one of three recent strategic moves within the company designed to better balance the international and domestic aspects of the business and to provide a strong and well-rounded management team to lead the company in North America, according to the company. Boucher has been with KIOTI since 2006. He came to the company with many years of experience in the automotive industry before a ten-year stint as president of Decker & Company, an agricultural industry firm. KIOTI Tractor is located in Wendell, N.C. It offers 30 tractor models ranging from 22 to 90 hp (16 to 67 kW) along with a choice of loader booms and buckets, backhoes and other attachments and implements. For more information, call 877/GO-KIOTI or visit www.KIOTI.com.

The most dangerous animals in the forest don’t live there.

PLAN AHEAD ALEX LYON & SON SALES MANAGERS & AUCTIONEERS, INC. Bridgeport, New York

IMPORTANT AUCTIONS

2 0 1 0 Auction

www.lyonauction.com www.lyonauctionlive.com

Calendar

Visit www.lyonauction.com for details... 1-2. Saturday, June 19 & Sunday, June 20: ATLANTIC CITY, NEW JERSEY: |2 DAY AUCTION! DAY 1: Late Model Construction, Support Equipment, Trucks & Trailers. DAY 2: All New Building Supplies & Kitchen Cabinets. 3. Wednesday, June 23: COLUMBUS, OHIO: Large Truck Tractor, Van Trailer, Construction, Support Equipment Auction. 4. Friday, June 25: NASHVILLE, TENNESSEE: Complete Liquidation of Late Model Cat Earthmoving Equipment, Mack Dump Trucks, Late Model Pickups, SUVs, Equipment Trailers & Support Equipment. 5. Saturday, June 26: BOSTON, MASSACHUSETTS: Complete Liquidation: Construction,Aggregate, Support Equipment, Trucks & Trailers. 6. Saturday, July 10: ALBANY, NEW YORK: Complete Liquidation of 3 Generations in Business. Excellent Paving, Construction, Support Equipment, Trucks & Trailers. 7. Wednesday, July 14th: DALLAS (FT. WORTH), TEXAS: Rental Returns of Forklifts, Aerial Lifts, Construction, Support Equipment, Trucks & Trailers. 8. Thursday, July 15: SAN BERNARDINO, CALIFORNIA: Late Model Construction, Support, Trucks &Trailers. 9. Saturday, July 17: SYRACUSE, (CANASTOTA), NEW YORK: Lyon’s Annual Summer Hay Camp & Friday Night Barbecue: Late Model Construction, Support, Aerial Lifts, Trucks & Trailers. * Stopin for the Barbecue Friday, July 16th before the sale and see the latest addition to the Lyon Family. It’s a site to see!

10.

Saturday, July 31: RUTLAND, VERMONT: Logging & Sawmill Operation: Full Line of Skidders, Delimbers, Prentice Log Loaders, Sawmill, Trucks, Trailers & Support Equipment. 11. Friday, August 6: QUERETARO, MEXICO: Late Model Construction Equipment, Large Quantity of Forklifts, Support Equipment, Trucks & Trailers. 12. Thursday, August 19: ORLANDO (KISSIMMEE), FLORIDA: Late Model Rental Returns. Construction, Support Equipment, Aerials, Forklifts, Trucks & Trailers. 13. Wednesday, September 15 & Thursday, September 16: FORT WAYNE, INDIANA: 2 DAY AUCTION!: Construction, Aerial Lift, Forklift, Support Equipment, Trailers, Truck Tractors, Pickups. 14. Friday, October 8: SAGINAW, MICHIGAN: Large Construction, Agricultural, Support Equipment, Truck & Trailer Auction. 15. Sunday, October 10: WESTMINSTER, VERMONT: Probably the FINEST Toy Train Collection East of the Mississippi! 16. DTBA: MIDDLETOWN (FLORIDA), NEW YORK: Late Model Construction, Support, Aerial Lifts, Trucks& Trailers. 17. DTBA: DETROIT, MICHIGAN: Complete Liquidation of Construction & Support Equipment. 18. DTBA: CLEVELAND, OHIO: Dump Trucks, Truck Tractors, Straight & Pickup Trucks, Drop Decks - Hi-Flat & Dump Trailers, Support Equipment.

LYON MEXICO: Now with FOUR permanent sale sites: MONTERREY, TOLUCA, AGUASCALIENTES & GUADALAJARA! Visit http://www.lyonmexico.com/ for more information.

The Complete Auction And Appraisal Service

ALEX LY N & SON SALES MANAGERS & AUCTIONEERS, INC. Bridgeport, NY 315/633-2944, Fax: 315/633-8010 Syracuse, NY (Evenings) 315/637-8912 www.lyonauction.com 18 BRANCH OFFICES: ONLY YOU CAN PREVENT WILDFIRES. www.smokeybear.com

AKRON, OH (330) 753-3932 • ALBANY, NY (518) 732-2669 • MANASSAS, VA (703) 626-2123 • ATLANTA, GA (770) 537-7386 • BALTIMORE, MD (410) 792-0008 • BRATTLEBORO, VT (802) 722-4727 • CHERRY HILL, NJ (856) 429-9149 • DETROIT, MI (248) 388-0918 • HARRISBURG, PA (717) 273-3737 • LAKELAND, FL (863) 660-0848 • MEMPHIS/NASHVILLE, TN (731) 660-4611 • MOBILE, AL (251) 510-1538 • NEW LONDON, CT (860) 535-8442 • RACINE, WI (262) 886-2778 • TAMPA, FL (813) 777-3273 • WASHINGTON, D.C. (310) 277-9875 • WORCESTER, MA (508) 845-2800

Page 108 â&#x20AC;˘ June 23, 2010 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

Lincoln Automatic Lube System Offered on John Deere Articulated Dump Trucks Lincoln has introduced automatic lubrication systems for the John Deere 350D and 400D series articulating dump trucks. Working in collaboration with John Deere engineering, these systems were designed to meet Deereâ&#x20AC;&#x2122;s standards for location, mounting and protection. The Lincoln Quicklub system is designed to eliminate daily manual lubrication, while ensuring that all components receive frequent, pre- The Lincoln Quicklub system is designed to eliminate daily manual lubrication, while determined amounts of ensuring that all components receive frequent, pre-determined amounts of grease grease while in use. The while in use. process lubricates critical used truck by a Lincoln Construction wear surfaces and maintains a seal may be increased. The same systems can be installed Distributor working with the John against rock dust, dirt, sand and water. Labor costs and downtime can be on a new truck at the factory through Deere dealers. For more information, call 812/853reduced with increased pin and bush- Paladin Custom Works in Davenport, ing life, and resale value of the ADT Iowa, or can be installed on a new or 8449 or visit www.deere.com.

Public Auction Friday, June 25th @ 9:00 AM Auction Location:

601 Christiana Ave. Wilmington, DE 19801

Please call (302) 654-1846 or Marty Piela @ (302) 530-9103 for more information

Inspection on June 23rd & 24th from 8amÂ˛5pm Visit our website for a list of inventory & pictures

www.utilityauctions.net Partial inventory listing: 2001 GMC C8500 reel trk w/Altec LP108, 2000 GMC C8500 reel trk w/OK Champion RL18KHD, 2000 GMC C7500 rodder trk w/OK Champion S660-36ATO, 1999 GMC C7500 vactor trk w/Vactor 2103-CB, 1998 GMC C7500 vactor trk w/Vactor 2103-CB, (3) Lift-All LOM25-552MS on 2005-2004 IHC 4300 bucket trks, Terex Telelect Hi Ranger 5FC-55 on a 2004 IHC 4300 bucket trk, Versalift SST40EIH on a 2003 Ford F550 bucket trk, Versalift VO350MHI on a 2000 GMC C8500 bucket trk, Versalift VN43I03 on a 2000 GMC C7500 bucket trk, Altec AM900 on a 1999 IHC 4900 bucket trk, (2) SHV36PI on 1999 GMC C7500 bucket trks, Versalift V032I on a 1999 GMC C7500 bucket trk, Versalift VN501 on a 1998 GMC C7500 bucket trk, MTI 805 on a 1997 Ford F800 bucket trk, Holan 805 on a 1997 Ford F800 bucket trk, Altec AN755 on a 1991 Ford F800 bucket trk, Lift-All LAN51-2E on a 1990 Ford F700 bucket trk, Versalift TIM3047T on a 2000 GMC C8500 digger derrick, Terex Telelect Commander 92-45 on a 1998 GMC C7500 digger derrick, Altec LRIV50 on a 1998 GMC C6500 forestry trk, 2000 Isuzu NQR lawn trk, Ditch Witch 3610DDLSB trencher, Miller Legend AEAD200LE genset, 1999 Ford F800 dump trk, 1998 Chev C3500 dump trk-29K miles, (2) 1998 Ford F800 dump trk, 1998 Ford F800 utility trk w/Lincoln Ranger 8t Genset, 1997 Chev C3500 utility trk w/ Grimmer Scmidt 150cfm air comp, 1989 Ford F700 knuckleboom w/National Crane N70-H21, 1988 GMC 7000 knuckleboom-Hiab 100 w/dump body & clam shell, 1989 Ford F700 crew cab dump trk w/ compressor & Liftmoor crane, 2001 GMC C7500 Cargo trk, (3) 2005-2001 Freightliner MT45 stepvans, (2) 2003-2003 Freightliner Sprinter 3500 cargo vans, (10) Workhorse-GMC-Chev stepvans, over 35 cargo & passenger vans, (2) 2003-2000 GMC K2500 4x4 pickups, 2002 Chev C1500 extended cab pickup, 2000 GMC C2500 pickup Z OLIWJDWH 689ÂśV RYHU -2000 Ford Focus s/w & more items added daily.

Financing can be provided by Northern Atlantic Financial, LLC JoAnn Cucciarre: Office 800-710-4361 Cell 610-909-8023. All financing must be pre-approved prior to the auction

Geith Precision Multiprocessor Manufactured in Nine Models The Geith precision multiprocessor is available in nine different models to fit excavator weights from 3.8 to 77 tons (3.5 up to 70 t). Geith precision multiprocessors utilize five different jaw types that can be interchanged quickly for maximum versatility: concrete jaws, steel shear jaws, pulverizing jaws, combination jaws and tank jaws.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 109

Online Auction Wednesday, June 30

122 Aerial Work Platforms

62 Backhoes

132 Compactors

90 Farm Equipment

202 Forklifts

135 Loaders

119 Skid-Steers

38 Telehandlers

403 Trucks – On-Road

Visit our website to see the complete list of equipment, review the guaranteed inspection reports, and place your bids.

Inspected and Guaranteed www.ironplanet.com s 888-433-5426

Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change.

Page 110 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

More Than 1,800 Onsite, Online Bidders Battle for

Kenworth Freightliner and Mack 10 to 12 cu. yd. mixer trucks were auctioned off.

Checking out the crane and steel spreaders at the auction are George Detwiler (L), operator of Cottles Asphalt, Saxton, Pa., and Sam Cottles president of Cottles Asphalt, Saxton, Pa.

The used equipment staff of Cleveland Brothers, Harrisburg, Pa., was represented at the Ritchie Bros. sale. (L-R) are Joe Goncalves, Tammy Weidman and Tom Jamieson.

Taking a water break on a hot spring day is John Price, president of IT Price Inc., Rising Sun, Md.

Ton Nine, technician, RLO Contracting, Dayton, Md., tests this Bomag roller during the Ritchie sale.

Brian Mills, representative of Ritchie Bros., directs traffic to the auction block for these Case International tractors.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 111

More Than 1,800 Items at Ritchie North East, Md., Sale

itchie Bros. conducted a multi-million dollar unreserved public auction June 2 in North East, Md. More than 1,800 registered bidders (both onsite and online) from 37 countries participated in the auction, including 48 U.S. states and all Canadian provinces. More than 1,800 items were sold during the one-day public auction.

These two Cat D8R dozers, one of which sold for $112,500, move across the auction ramp.

Ready to bid are Sterling Lowe (L), president of Industco Enterprises, Baldwin Md., and Danny Cavalluci, president of Cavalluci Plumbing in Street, Md.

Moe Iacoboni, northeast representative of Ritchie Bros., answers bidders’ questions on the timed auction lot area.

Testing out this Komatsu 37X dozer is Elmer Beiler, independent contractor from Lancaster, Pa.

Coming in from Bolivia to look and bid on equipment is Mario Lopez, equipment distributor and contractor.

There were more than 1,800 items at the recent Ritchie Bros., North East, Md., auction, including Bobcat, Caterpillar, John Deere and other skid steer manufacturers.

Page 112 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com Phone: 315-633-2944

RITCHIE BROS. AUCTIONEERS www.rbauction.com Phone: 402-421-2631

• Nashville, TN Fri., June 25, 2010 For: Complete Liquidation of Late Model Cat Earthmoving Equipment, Trucks & Trailers, Support Equipment

• Phoenix, AZ June 24, 2010

• Boston, MA Sat., June 26, 2010 For: Complete Liquidation: Construction, Aggregate, Support Equipment, Trucks & Trailers

• Hartford, CT June 24, 2010 • Geelong, Australia June 24, 2010 • Grand Prairie, AB, CAN June 24-25, 2010

• St. Louis, MO June 29, 2010

• Dallas, TX Wed., July 14, 2010 For: Rental Returns of Forklifts, Aerial Lifts, Construction, Support Equipment, Trucks & Trailers

• Toronot, ONT, CAN July 6, 2010

• Syracuse, NY Sat, July 17, 2010 For: Lyon’s Annual Summer Hay Camp & Friday Night Barbeque: Late Model Construction, Support Equipment, Aerial Lifts, Trucks & Trailers • Rutland, VT Sat., July 31, 2010 For: Late Model Construction • Queretaro, Mexico Fri., August 6, 2010 For: Late Model Construction Equipment, Large Quantity of Forklifts, Support Equipment, Trucks & Trailers • Orlando, FL Thurs., August 19, 2010 For: Late Model Rental Returns of Forklifts, Aerial Lifts, Construction, Support Equipment, Trucks & Trailers • Fort Wayne, IN Wed.-Thurs, September 15-16, 2010 For: Construction, Aerial Lift, Forklift, Support Equipment, Trailers, Truck Tractors, Pickups • Saginaw, MI Fri., October 8, 2010 For: Large Construction, Agricultural, Support, Aerial Lifts, Trucks & Trailers • Middletown (Florida), NY DATE TBA For: Rental Fleet Construction Equipment, Support, Aerial Lifts, Trucks & Trailers • Detroit, MI DATE TBA For: Complete Liquidation of Construction and Support Equipment • Cleveland, OH DATE TBA For: Dump Trucks, Truck Tractors, Straight and Pickup Trucks, Drop Decks, Trailers, Support Equipment

A.J. WILNER AUCTIONS www.ajwauctions.com Phone: 908-789-9999

DEANCO AUCTIONS www.deancoauction.com Phone: 601-656-9768

• Jersey City, NJ Tues., July 20, 2010 For: Champion/Alimak HEK Construction Elevators plus RT Lift & Trucks

• Huntsville, AL Thurs., June 24, 2010 For: Construction Equipment, Trucks, Trailers and Support Equipment

• Anchorage, AK June 26, 2010

• Albany, NY Sat., July 10, 2010 For: Complete Liquidation of 3 Generations in Business. Excellent Paving, Construction, Support Equipment, Trucks and Trailers

• San Bernardino, CA Thurs., July 15, 2010 For: Late Model Construction, Support, Trucks & Trailers

Coming Auctions

• Statesville, NC June 30, 2010 • St. Aubin Sur Gaillon, France July 6, 2010

• Regina, SK, CAN July 7, 2010 • Truro, NS, CAN July 8, 2010 • Moncofo, Spain July 8, 2010 • Los Angeles, CA July 9, 2010 • Montreal, QC, CAN July 13, 2010 • Chicago, IL July 13-14, 2010 • Sacramento, CA July 14, 2010 • Caorso, Italy July 15, 2010 • Prince George, BC, CAN July 15, 2010 • Fort Worth, TX July 15-16, 2010 • Istanbul, Turkey July 17, 2010 • Chilliwack, BC, CAN July 21, 2010 • Dubai, United Arab Emirates July 26-28, 2010 • Olympia, WA July 29, 2010 • Northeast, MD August 3, 2010 • Albuquerque, NM August 4, 2010 • Torreon, NM August 5, 2010 • Las Vegas, NV August 6, 2010 • Salt Lake City, UT August 17, 2010 • Orlando, FL August 18, 2010 • Houston, TX August 26-27, 2010 • Polotitlan, Mexico September 8, 2010 • Brisbane, Australia September 14, 2010 • Kansas City, MO September 15, 2010 • Orlando, FL October 13-14, 2010

BAR NONE AUCTION www.barnoneauction.com Phone: 866-372-1700 • Sacramento, CA Sat., July 10, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., July 23, 2010 For: Commercial Truck and Heavy Equipment Auction • Sacramento, CA Sat., August 14, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Thurs.-Sat., August 26-28, 2010 For: Commercial Truck and Heavy Equipment Auction • Sacramento, CA Sat., September 11, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., September 24, 2010 For: Commercial Truck and Heavy Equipment Auction • Sacramento, CA Sat., October 9, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., October 22, 2010 For: Commercial Truck and Heavy Equipment Auction • Sacramento, CA Thurs.-Sat. November 11-13, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., November 19, 2010 For: Commercial Truck and Heavy Equipment Auction • Sacramento, CA Sat., December 11, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., December 17, 2010 For: Commercial Truck and Heavy Equipment Auction

• Philadelphia, MS Thurs., July 15, 2010 GLOBAL FORCE AUCTION GROUP www.gforceauction.com Phone: 877-631-0650 • Palmyra, PA Fri., July 9, 2010 For: Construction Equipment HILCO INDUSTRIAL, LLC www.hilcoind.com Phone: 847-313-4747 • Hueysville, KY Thurs., July 15, 2010 For: Large Offering of Surface and Strip Mining Equipment HILLER AUCTION SERVICE www.hillerauction.com Phone: 763-856-2453 • Zimmerman, MN Sat., June 26, 2010 For: Summer Contractor, Landscaper and Sportsman Auction HUNYADY AUCTION COMPANY www.hunyady.com Phone: 800-233-6898 • Omaha, NE Wed., June 30, 2010 For: Absolute Auction NegusSons, Inc. • Brodheadsville, PA Thurs., July 15, 2010 For: Surplus Equipment from Frantz Trucking & Excavating • Fort Meade, FL Wed. July 21, 2010 For: Sealed Bid Auction – Recently Off-Lease Equipment INSIGHT AUCTIONEERS www.insightauction.com Phone: 863-386-1225 • Sebring, FL Saturday, July 17, 2010 • Sebring, FL Saturday, September 18, 2010

• Middletown, OH Thurs., August 12, 2010 For: SK Construction

IRAY AUCTIONS www.iraymn.com Phone: 320-968-7230

• Harrison, MI Thurs., June 24, 2010 For: (2) Complete Excavating Contractor Auctions

• Thurs., June 24, 2010 For: Construction Equipment • Wed., June 30, 2010 For: Construction Equipment • Thurs., July 8, 2010 For: Construction Equipment • Thurs., July 15, 2010 For: Construction Equipment

BUNCH BROTHERS AUCTIONEERS www.bunchbrothers.com Phone: 270-376-2992

DARELL DUNKLE & ASSOCIATES AUCTIONEERS INC. www.dunkleauctioneers.com Phone: 800-433-6670

IRON PLANET AUCTIONS www.ironplanet.com Phone: 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid!

• Portage, WI Fri., July 16, 2010

MANHEIM AUCTIONS www.manheimauctions.com Phone: 863-607-5440 • Lakeland, FL Fri., June 25, 2010 For: Construction Equipment NITKE AUCTIONS www.nitkeauctions.com Phone: 715-362-6162 • Marquette, MI September TBA For: CCMO – Mining Equipment, Trucks • Wausau, WI Fri.-Sat, October 22-23, 2010 For: 2-Day Construction Equipment, Truck & Trailer Auction PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com Phone: 860-642-4200 • Franklin, CT Fri.-Sat., June 25-26, 2010 For: Construction Equipment, Earthmoving and Paving Equipment, Trucks and Trailers • Warwick, RI Tues., July 20, 2010 For: Construction Equipment, Cranes & Rigging, Trailers, Forklifts & Tools • Warwick, RI Fri., July 30, 2010 For: Trucks, Trailers, Shop Equipment and New Parts Inventory PURPLE WAVE AUCTION www.purplewave.com Phone: 866-608-9283 ONLINE AUCTION Bidding Closes Tues, June 29 – 10AM For: Auto, Heavy Trucks, Construction Equipment, Tools, Trailers and More!

RITCHASON AUCTIONEERS INC. www.ritchason.com Phone: 800-806-3395 • Lebanon, TN Sat., June 19, 2010 • Lebanon, TN Sat., September 18, 2010 • Lebanon, TN Sat., December 11, 2010

STOCK AUCTION COMPANY www.stockra.com Phone: 800-937-3558 • Wed., July 14, 2010 BIG IRON Timed Internet Auction ONLY • Wed., July 28, 2010 BIG IRON Timed Internet Auction ONLY • Wed., August 11, 2010 BIG IRON Timed Internet Auction ONLY • Wed., August 25, 2010 BIG IRON Timed Internet Auction ONLY • Omaha, NE Sat., August 28, 2010 For: Fleet Vehicle and Heavy Equipment Auction

TAMPA MACHINERY AUCTION, INC. www.tmauction.com Phone: 813-986-2485 • Tampa, FL Sat., July 10, 2010 • Tampa, FL Sat., August 14, 2010 • Tampa, FL Sat., September 11, 2010 • Tampa, FL Sat., October 9, 2010 • Tampa, FL Sat., November 13, 2010 • Tampa, FL Sat., December 11, 2010

UTILITY AUCTIONS www.utilityauctions.net Phone: 302-530-9103 • Wilmington, DE Fri., June 25, 2010 For: Construction and Utility Equipment

YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com Phone: 419-865-3990

• Foley, MN Fri., September 17, 2010

RDO AUCTIONS www.rdoauctions.com Phone: 866-536-5189

• Portage, WI Fri., October 15, 2010

• ONLINE AUCTION June 21-28, 2010

• Riverview (Detroit), MI Tues., June 29, 2010

• Foley, MN Fri., December 3, 2010

• ONLINE AUCTION July 20-27, 2010

• Lancaster, NH Thurs., August 26, 2010

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 113

Complete Liquidation Towne Construction & Paving Co.

LATE MODEL CONSTRUCTION, SUPPORT, AERIAL LIFTS, TRUCKS & TRAILERS AUCTION

IT’S BIG!

3 Generations in Business Paving, Construction, Support Equipment, Trucks & Trailers.

(Plus the ALEX LYON & SON ANNUAL HAY CAMP & BARBECUE – FRIDAY NIGHT!)

SATURDAY, JULY 10 @ 9:30 AM ALBANY (SCHENECTADY), NEW YORK

SATURDAY, JULY 17 @ 9:00 AM CANASTOTA (SYRACUSE), NEW YORK

DIRECTIONS: From Albany Airport: Turn left at NY-7 W/ Troy Schenectady Rd. 7 miles. Merge onto I-890 W via ramp to Schenectady 4.3 miles. Exit onto NY-337 S/W Campbell Rd. for 1.4 miles, right at NY-337 S/ Burdeck St. Site will be on the right. Address: 828 Burdeck St., Schenectady, NY 12306.

DIRECTIONS: 20 miles East of Syracuse. Use Exit 34 (Canastota) off New York State Thruway (I-90), turn right. Sale site is 1/4 mile on left. Address: 601 North Peterboro St., Canastota, NY 13032. (Route 13)

NOTE: Towne Construction & Paving, highly successful for 3 generations, has decided to pursue other interests and will sell their top quality equipment, support & vehicles at auction. This equipment will suit anybody! HILITES INCLUDE: 2 MOTOR GRADERS: Komatsu GD615A-1 (front scarifier), Puckett Bros. 510DWEC, RUBBER TIRED LOADERS: Komatsu WA320, 2 HYDRAULIC EXCAVATORS: 2005 JD 120CLC, 2004 JD 120C, CRAWLER TRACTORS: Komatsu D37E, 2 TRACTOR LOADER BACKHOES: JD 310D (4x4), 3 ASPHALT PAVERS: 2001 IR PF5510, IR PF510, Fortress Allatt 450F, 7 ASPHALT ROLLERS: 2004 IR DD110, IR DD110, Dynapac CC422, Dynapac CC102, 2004 Sakai SW320, Mauldin 1450-R, Mauldin 1 ton, VIBRATORY ROLLERS: Bomag BW156DH-3, SKID STEER: 2001 Gehl 5635DXT (Planer attachment), 2 AIR COMPRESSORS: IR P100, Sullair 185CFM, 3 WELDERS: Millermatic 251, Thermo Dynamics CUT MASTER 50, Air Products MIG 185, LIGHT PLANTS: IR L5, 2 LOADER LANDSCAPE TRACTORS: JD 210E (4x4), JD 210E (4x4), VAN TRUCKS: 2003 GMC 3500, 13 DUMP TRUCKS: (NOTE: All Trucks are in MINT condition!) 2000 - (2) 1997 Mack RD688S (tri.), (2) 2000 Freightliner FDL (tri.), (2) 2001-2000 Volvo WG64F (tri.), (2) 1988 Ford L8000 (tri.), 1985 Ford F800, 1987 Ford F700, 1951 Chevy, TRUCK TRACTORS: 1995 Mack CH613 (tri.), 2 UTILITY TRUCKS: 2004 Ford F450XL, 1995 Ford F350XL, 6 PICKUP TRUCKS: (2) 2003-1997 Ford F150XL (crew cab), 2002 Chevy Silverado 2500HD (4x4), 2000 Nissan Frontier, 1999 GMC 2500 Sierra, 3 SUVS: 2004 Lexus RX330, 2001 Lexus RX300, 1978 Chevy Blazer, DETACHABLE GOOSENECK TRAILER: 1996 Trailboss 45ft., 8 TAGALONGS: 2004 Eager Beaver 25XPT 25 ton (tri.), 2002 Trailboss 25 ton, Custom (electric brakes), 1994 Custom trailer 11T702 (tri.), 1992 10 ton (t/a), 1998 Hurst (t/a), 1992 Karavan 14ft. (t/a), 2003 Texas Bragg 8ft. (s/a), 1992 Custom Built 8ft. (s/a), LIVE BOTTOM TRAILERS: 1997 Flowboy 40ft. (tri.), ATTACHMENTS: Skid Steers: Pallet Forks, Pallet Frames, 60in.-72in. Buckets, Hay Spears, Grapples, Thumbs, Fork Frames, Stump Buckets, Backhoes, Tree Booms, SUPPORT EQUIPMENT: IR BX Plate Compactor, Stowe Walk Behind Saw, Shop Air Compressor, Shop Welder, Clipper Saw, Mikasa Compactor, IR BX8 Plate Compactor, Homelite Cut Off Saw, Lasers, 2in. Water Pump, Sump Pump, Stihl TS350 Saw, SandBlaster, Chain Saw, Tar Kettle, Battery Charger, (3) Mikasa Compactors, MK Diamond Saw, Pressure Washers: Simpson SHW2000GE.

(IT’S A BIG SALE!)

NOTE: As in the past, this auction puts together a great line-up of all types of late model equipment, trucks & trailers plus a great time to socialize at the Lyon’s Farm. VERY EARLY HILITES INCLUDE: 2 HYDRAULIC EXCAVATORS: 2006-2005 JD 120C, 4 CRAWLER TRACTORS: JD 850C (cab), 2003 JD 750C-II, 2005 JD 450JLT, JD 450H, 2005 NH DC150B, 3 SKID STEERS: Case 410, Gehl 6635SXT, Gehl 3510, TELESCOPIC FORKLIFTS: 2003 JLG G9-43A, 8 ROUGH TERRAIN FORKLIFTS: IR RT7087H-4W (cab), (7) JCB 940 (cab), 9 LAWN & GARDEN TRACTORS: JD 335, JD LT160, JD 210, Kubota T1400, Cub Cadet GT3205, CubCadet 1220, NH GT22, Simplicity Regent, Yanmar GT14, 7 COMMERCIAL MOWERS: Kubota ZD28, Kubota 2623, Ferris H2225K, Ferris H2223K, Ferris IS300, Cub Cadet Z Force, Cub Cadet Z Force, 3 LOADER LANDSCAPE TRACTORS: Cub Cadet 7260 (4x4), Cub Cadet 7254 (4x4), Kubota B7100 (4x4), 2 UTILITY TRACTORS: JD 2210 (4x4), Ford 4400, KNUCKLEBOOM DUMP TRUCK: 1999 Mack CL713 Elite (t/a), BUCKET TRUCK: 1989 IHC S2500 (s/a), 2 VAN TRUCKS: 2001 GMC 3500 (s/a), 2004 Mitsubishi FEHD (s/a), Truck Parts & Accessories: 8FT. Truck Cap, 3 DETACHABLE GOOSENECK TRAILERS: (2) 2010 Witzco 50T, 2010 Witzco 35T,TAGALONG TRAILER: 2000 Eager Beaver 20ton (t/a), 2001 Phelan 10TAHD 10ton (t/a), CABLE TRAILER: Hydra-Dyne Corp. 3RC-76-46, ATTACHMENTS: Skid Steers: Pallet Forks, Fork Frames, 60in. – 72in. Buckets, Thumbs, Hay Spears, Snow & Mulch Buckets, Grapples, Thumbs, Fork Frames, Stump Buckets, Backhoes, Tree Booms, SURVEY EQUIPMENT: New Northwest NEXPK99, New CST/Berger CALP26D, SUPPORT EQUIPMENT: Copiers, Chainsaws, Straps, Bottle Jacks, Battery Chargers, Winches, Sockets, Go Karts, Post Hole Diggers, Compressors, Hose Reels, Grinders, Weedeaters, Sandblasters, Grills, Tri-Balls, Generators, Wagons, Tricycles, Trailer Jacks, Welders, Tires, Heaters, Hoists, Lights, Scooters, Scaffolding, Pumps, Fuel Tanks, Concrete Saw, Universal Seats, Impact Wrenches, Chains, Binders, Industrial Tires, Seat Cushions, Pallets of Jumbled Stone, Pressure Washers: (2) 2010 Easy Kleen Magnum 4000, (2) 2010 Easy Kleen Magnum Plus, (2) 2010 Easy Kleen Magnum Gold. SALE SITE PHONE: (315) 697-3239, (863) 660-4811

COME TO OUR HOSPITALITY PARTY ON FRIDAY, JULY 16TH!* All Auction attendees are invited to the Alex Lyon & Son Main Farm for a

HUGE BBQ the night before the auction on July 16th at 5PM. Jack personally invites all to come enlist in the famous “Alex Lyon Hay Camp”, see the farm, or enjoy the music… but above all, plan on eating.

It’s sure to be an action-packed weekend that’ll go down in history, so start making your plans.

Everything sells “AS IS,” “WHERE IS,” everything sells to the highest bidder without minimums or reserve.

Visit us on the Internet at www.lyonauction.com

The Complete Auction And Appraisal Service

ALEX LY

N & SON

SALES MANAGERS & AUCTIONEERS, INC.

Bridgeport, NY 315/633-2944, Fax: 315/633-8010 • Syracuse, NY (Evenings) 315/637-8912 • www.lyonauction.com

Page 114 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hunyady Holds Liquidation Auction for John Mack Paving

If you need to know anything about asphalt products, you’ll want to ask these experts. Mike Corsino (L) and David Fackler (R), both of Asphalt Care Equipment, Bensalem, Pa., and Steve Dixon of Dixon Sealer & Supply, Scranton, Pa.

unyady Auction Company held an auction June 10 in Bensalem, Pa. The liquidation sale for John Mack Paving of Bensalem, Pa., featured a nice selection of paving equipment and crawler and rubber-tired loaders, skid steers, crawler tractors and backhoes and dump and utility trucks. The owners of John Mack Paving, John and Betty Mack, recently decided to retire after 57 successful years in business. (L-R): Joe Villa, used equipment manager, Ransome CAT, Bensalem, Pa., meets up with Jack and Bob Grady of Grady & Son Excavation LLC, Warrington, Pa.

After 57 successful years in business as John Mack Paving, John and Betty Mack are retiring and going fishing. Hunyady Auction Company recently conducted an absolute auction for the company in Bensalem, Pa. The father and son team of Sam Zucker Sr. and Sam Zucker Jr. (in cab) work the controls on a Bobcat skid steer.

Paving contractors could choose from a variety of asphalt rollers, including a Stone 1.25-ton (1.1 t) tandem roller and an Ingersoll Rand 74-in. (188 cm) tandem roller.

Jim Smith of H.E. Smith Contracting, Malvern, Pa., looks over a Fiat Allis wheel loader.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 115

AIM Grapple Buckets Offer Steel Edge, Abrasion Resistant Bottom AIM Attachments now offers a complete maintains the breakout forces of the line of heavy duty loader grapple buckets machine. For more information, call 800/803-3365 for wheel loaders of all sizes. Grapple buckets feature durable con- or visit www.aimattachments.com. struction with an AR400 steel cutting edge with reinforced corners and gussets. The GPL bucket design also features an abrasion resistant bottom with thick wear straps. The hydraulic clamps feature a bolton middle design that allows the clamps to be used in dual and single configurations. The AIM GPL bucket is ready for stockpiling, bank loading, as well as excavation tasks. The sloped bottom design provides maximum The AIM GPL bucket is ready for stockpiling, bank loading, dump clearance and as well as excavation tasks.

ABSOLUTE AUCTION Surplus Equipment Frantz Trucking and Excavating Thurs., July 15, 2010 – 9:00AM EDT Brodheadsville, PA

Hydraulic Excavators and Attachments `04 JD 330C-LC, s/n FF330CX082888, JD dsl and hyd drive, e/w 13’ stick, H&H 54” digging bkt, 2964 orig. hrs • Unused H&H 1.18 CY, 30” Digging Bkt (Fits JD 330LC) • `98 CAT 320BL, s/n 6CR03006, Cat 3066 dsl and hyd drive, e/w 9’6” stick, 28” digging bkt, manual quick disconnect, aux hyds • `99 JD 200LC, s/n 500701, JD dsl and hyd drive, e/w 9’6” stick, H&H 42” digging bkt, H&H mechanical thumb • 24” Digging Bkt (Fits JD 200LC) • `89 CAT 215CLC, s/n 4HG02206, Cat 3304DI dsl and hyd drive, e/w 7’3” dipper stick, 36” digging bkt • 24” Digging Bkt (Fits Cat 215CLC) Crawler Loaders `03 CAT 963C, s/n BBD00421, Cat 3126 dsl and hydrostatic trans, gp bkt w/teeth & cutting segments, EROPS w/heat & ac, 17” DBG pads (755 Original Hours) `94 CAT 953B, s/n 5MK1286 • `87 CAT 953 LGP, s/n 20Z01735, Cat 3204 dsl and hydrostatic trans, e/w gp bkt w/teeth, ROPS canopy, and 15” DBG pads

Rubber Tired Loaders and Attachments `99 CAT 938G, s/n 6WS01294, Cat 3126 DITA dsl and ps trans, e/w gp bkt w/teeth, hyd quick disconnect, aux hyds • `95 CAT 938F, s/n 1KM01009, Cat 3116 dsl and ps trans, e/w Balderson gp bkt w/bolt-on cutting edge, hyd quick disconnect, aux hyds • (2) BALDERSON Hyd Side Dump Bkts (938F/938G) • (2) BALDERSON 60” Fork Attachments (938F/938G) • `94 CAT 928F, s/n 2XL00733, Cat 3116DIT dsl and ps trans, e/w gp bkt • `88 CAT 950E, s/n 65R03184, Cat 3304 dsl and ps trans, e/w gp bkt w/teeth • CAT 950B, s/n 31R01444, Cat 3304 dsl and ps trans, e/w Balderson gp bkt w/teeth, Balderson hyd quick disconnect

Crawler Tractors `95 CAT D5HXL Series II, s/n 8RJ04566, Cat 3306 dsl and ps trans, e/w 6-way straight blade • `97 CAT D5CXL Series III, s/n 9DL01864, Cat 3046 dsl and ps trans, e/w 6-way straight blade • CAT D6C, s/n 76A5505, Cat 6 cylinder dsl and ps trans, e/w straight blade w/left tilt Articulated End Dumps `05 KOMATSU HM350-1, 35 Ton, s/n 26001113 • `93 VOLVO A30, 30 Ton 6x6, s/n A30V1249 • `86 CAT D25C, 25 Ton 4x4, s/n 9YC00275 • `87 CAT D25C, 25 Ton 4x4, s/n 9YC00450 Tractor Loader Backhoes `96 JD 310D, 4x4 Extend-A-Hoe, s/n 825224 • `94 JD 310D, 4x4 Extend-A-Hoe, s/n 800459 • `96 CASE 580 Super L, 4x4 Extend-A-Hoe, s/n JJG0198502 Vibratory Compactor, Mobile Sweeper, and Paver `96 IR SD-100D, s/n 147836, Cummins 4BTA3.9C dsl, e/w 84” smooth drum • `90 ELGIN Whirlwind Series L, s/n L0322S • `96 MAULDIN 550E Crawler Paver, s/n 55-9608-133, e/w 8’-11’ vibrating screed Dump Trucks and Tag-A-Long Trailers (2) `97 MACK RD688S Tri-Axle, Mack E7-350 dsl and Eaton Fuller 8LL, e/w Bibeau 17’ steel heated dump body • (3) `95 FORD L9000 Tri-Axle, Cat 3306, 300HP dsl and Roadranger 8LL, e/w 18’ heated steel dump body • `93 AUTOCAR TriAxle, Detroit Series 60, 12.7L 450HP dsl and Eaton Fuller 8LL, e/w Hewey 17’6” alum dump body • `77 FORD 9000 T/A, Cummins 230HP dsl and 8 spd trans, e/w 13’6” steel dump body • `77 FORD T/A, Cummins 230HP dsl and 8 spd trans, e/w 14’ steel dump body • `97 EAGER BEAVER 20XPT, 20 Ton • `96 EAGER BEAVER 10HA, 10 Ton Truck Tractor, Dump Trailers, and Lowboy `87 PETERBILT 379 T/A, Cat 3406B, 400HP dsl and Fuller Roadranger 9 spd trans, e/w 38,000# rears, 12,000# front axle, wetline • `84 PARKER TDA-30R, 30’ T/A • `79 PARKER TDA-28, 28’ T/A • ROGERS 35 Ton T/A Lowboy PLUS: Utility and Pickup Trucks

Please Call (800) 233-6898 or Email sales@hunyady.com For Complete, Descriptive Brochure!

www.hunyady.com PA Auction License No: AY000281 While information is believed to be accurate, all items will be sold “As-Is, Where-Is” without guarantee or warranty. A physical inspection is suggested.

Page 116 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Business Calendar June 14, July 20, August 18, September 15, 2010 – Golf Outings. The CAM (Construction Association of Michigan) Golf Committee’s 2010 CAM Golf Outing Schedule which features four value-packed outings at remarkable prices include dates June 15 Devil’s Ridge Golf Club - Oxford; July 20 Dunham Hills Golf Club - Harland; August 18 Fieldstone Golf Club - Auburn Hills; September 15 Cherry Creek Golf Club - Shelby Township. For more information and any other questions please contact Diana Brown at 218-972-1000. June 23, 2010 – Breakfast and Seminar. AGC St. Louis Monthly Membership Breakfast and One Hour Early Bird Seminar to be held at the Construction Training School, 6301 Knox Industrial Dive, St. Louis, MO. Breakfast starts at 7 AM with the Seminar: “Positioning Your Business for Lenders” at 8 AM. For further information, contact Katie Mason at (314) 480-3178 or Nancy Valentine at (314) 781-2356 extension 103. June 25-26, 2010 – Show. South Carolina Truck Show, Charleston, SC. Home to beautiful beaches and great American history, Charleston, SC will be the site for the South Carolina Truck Show. The event is being held at the Faith Assembly of God Church, 337 Farmington Road, Exit 199 off I-26. All proceeds from this event will go towards missions work at Faith Assembly of God Church. For more information, call 843-376-2418 or email dr.fry@wlcn.tv. June 29-30, 2010 or September 28-29, 2010 or December 7-8, 2010– Construction Training. AGC St. Louis Professional Development; Construction Quality Management for Contractors. This course familiarizes contractor personnel with Corps of Engineers Construction Quality Management concepts and procedures. Questions, please contact Joanne Engel at (314) 644-1525 ext. 225. July 19-21, 2010 – Workshop. Illinois Association of Aggregate Producers is hosting a Illinois Teachers Workshop: “Rocks, Minerals & Mining in Today’s Society” at Chestnut Mountain Resort, 8700 West Chestnut Road, Galena, Illinois 61036; telephone: (800) 798-0098. For sign up information or questions, please call: Glenda Schoening or Shawn McKinney (217) 241-1639. DONATION - HELP Support IAAP’s Political Activities – The IAAP Political Action Committee (PAC) was created in order to provide financial support for our allies in the Illinois General Assembly. Whether from Chicago or Downstate Illinois, Democrat or Republican, these legislators all have one thing in common – they support bills that help the Illinois aggregates industry and oppose bills that hurt our interests. As the cost of political campaigns continues to rise, we want to ensure that legislators who support this industry can compete and continue to do good work. For that reason, supporting the IAAP PAC is critically important to the future of our industry, your company, and your Association’s political activities. Please consider sending a donation, payable to the IAAP, to: John Henriksen, Secretary/Treasurer, IAAP PAC, 1115 S. 2nd Street, Springfield, Illinois 62704. INFORMATION - The Transportation for Illinois Coalition (TFIC) has published and electronic version of it’s most recent white paper, an analysis of the 2009 capital program. To download a copy of this document, go to the TFIC website: http://www.tficillinois.org, click on publications and open the file entitled Capital Funding for Transportation. Questions? Please feel free to contact John Henriksen, Illinois Association of Aggregate Producers, 1115 South 2nd Street, Springfield, IL 62704. Office: (217)241-1639. Cell: (217)899-7389. Fax: (217)241-1641. AGC Volunteer Appreciation - The AGC of St. Louis is grateful for the many members who serve on committees. The time devoted by these individuals and the knowledge they share with the industry in very important to the success of the AGC.

Some Homebuilders Hopeful About Recent Upward Trend ECONOMY from page 1

employers’ willingness to hire, rose 1.3 percent. That was the highest level since May 2004. New orders, a gauge of future production, were unchanged. John Silvia, chief economist at Wells Fargo, said: “It does look like there’s sustainable economic growth in the U.S. for the time being.” Expiring tax credits for first-time homebuyers helped drive the 4.4 percent rise in home construction spending. And portions of the $787 billion stimulus package approved last year by Congress boosted government building 2.4 percent. The other major sector, nonresidential construction, climbed 1.7 percent. That marked the first such advance since March 2009. The strength came from gains in private sector work on communications projects and power generation facilities. Construction of office buildings and the category that includes shopping centers fell. Commercial building projects have suffered in the weak economy through rising loan defaults and tighter credit. That’s made

it harder for developers to get financing. Ian Shepherdson, chief U.S. economist at High Frequency Economics, said the spike from the homebuyer tax credit is likely to fade. Buyers hoping to cash in on the government tax incentives had to have a signed sales contract by April 30. Shepherdson discounted the unexpected rise in nonresidential activity. “These numbers are hugely unreliable … and we expect a downward revision next month,” he said. Some in the industry are more optimistic. Luxury homebuilder Toll Brothers Inc. reported a narrower loss in its latest quarter and said it had seen a surge in orders. The company said the strength in orders was holding up in May even though the tax credits had ended. PulteGroup Inc., the nation’s largest homebuilder, reported in early May that it was able to reduce its loss for the first quarter and expected to be profitable this year. That would mark a key turning point for the company, which has posted losses in 14 consecutive quarters.

Posillico Civil Inc. Contributes Extensive Experience to Job TRAFFIC from page 28

some minor conflicts with locations and elevations, but all were resolved through meetings.” “We have performed other bridge jobs for NYSDOT, including the installation of a new Long Island Rail Road [LIRR] threetrack bridge and rerouting a road under the bridge,” he added. “That contract included asbestos removal and demolition of buildings, removal of underground storage tanks, relocating all underground and overheard utilities, and lowering a 345 KV NY Power Authority Electric Facility line supplying up to 80 percent of Nassau County’s electrical needs in the summer months. We assembled the steel LIRR track bridge on site and rolled it into place during a weekend with a double track outage.” The company also is working on a NYSDOT contract replacing a bridge carrying Route 25 over the LIRR in Southwold, N.Y., and constructing an associated 3,707 ft. (1130 m) length of Route 25. The job involves protecting an existing LIRR line

during construction of the bridge and demolition of the old overpass. Prior to the start of construction, the entire area required a surcharge embankment to induce settlement of the underlying soils, which included clay. This surcharge was built using a combination of temporary walls and steel sheeting. The new bridge foundation will be supported on cast-in-place concrete piles. Due to adjacent wetlands, a minimum amount of land was available for the new roadway and so permanent steel sheeting is being used to support the roadway embankment. NYSDOT has announced that a number of mobility and safety improvements are planned for the Route 110 corridor between the Long Island Expressway and the Northern State Parkway. Projects under its NY Route 110 Safety and Mobility Improvement Project include reconstruction of the Route 110 and Northern State parkway interchange. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 117

COMPLETE LIQUIDATION AUCTION of ASSETS & EQUIPMENT of

Sealed Bid Auction Recently Off Lease Equipment

L.J. SITE DEVELOPMENT, INC. d/b/a L.J. HEAVY HAULING & ROOFING and L.J. CRANE & RIGGING, INC. (Per Order of Court Appointed Receiver, Jonathan N. Savage, Esq.)

Bid Deadline: Wed., July 21, 2010 5:00PM EDT

TUESDAY, JULY 20TH, 9:30AM • 522 JEFFERSON BLVD, WARWICK, RI 02886

MULTI MILLION DOLLAR INVENTORY Including: Up To 2008 Mdl Grove All Terrain, Manitowoc Crawler Cranes; Up To 2007 Mdl Potain Tower Cranes; Up to 2007 Mdl Heavy Hauler Peterbilt, Kenworth, Mack & Western Star Truck Tractors & Rigging Trucks; (10) Dbl & Sgl Drop Trailers (Some Stretch Deck); (20) Up To 2009 Mdl High Flatbed Trailers (Some Stretch Deck); 2005 Fontaine 55 Ton Lowbed w/Level Deck; 2003 Fontaine Drop Side Lowbed; 2002 Fontaine Beam Trailer; (15) Up To 2009 Mdl Service, Fleet & Management Vehicles; Forklift; Extensive Inventory Of Crane & Rigging Support Equipment, Accessories & Attachments; New Replacement Parts & Supplies; Shop Equipment; Repair Tools & Equipment; Specialized Maintenance Tooling; & MORE! Virtually All Auction Inventory in Job Ready Showroom Condition Product of an Exemplary Maintenance Program IMPORTANT NOTE: This auction is per order of the court appointed receiver. Some equipment to be offered “Subject to Confirmation”. Auction inventory subject to change without notice. Please consult our website for updates or important announcements.

Fort Meade, Florida

Crawler Tractors `05 CAT D8R Series II, s/n 6YZ02023 • `05 KOMATSU D375A-5, s/n 18368 • `05 KOMATSU D275AX-5, s/n 20195 • `05 KOMATSU D275AX-5, s/n 20193 • `05 KOMATSU D275AX5, s/n 20194

Hydraulic Excavators `05 CAT 345BL Series II, s/n AGS02689 • `05 CAT 345BL Series II, s/n AGS02688

COMPLETE LIQUIDATION AUCTION of JM EQUIPMENT & TRANSPORTATION, INC. & Affiliated J&J EQUIPMENT LLC

Motor Grader

FRIDAY, JULY 30TH, 9:30AM • 95 RYE STREET, BROAD BROOK, CT 06106 OVER 550 MAJOR PIECES FROM ONE OF CT’s MOST RESPECTED RENTAL COMPANIES TRUCKS, TRAILERS, SHOP EQUIPMENT & NEW PARTS INVENTORY

EXCAVATION EQUIPMENT: TELESCOPIC BOOM & FORKLIFTS: SCISSOR LIFTS: PERSONNEL & MATERIAL LIFTS: GENERATORS: COMPRESSORS: TRENCHERS: HEAVY HAULER TRUCK TRACTORS: LOWBED & RECOVERY TRAILERS: SERVICE TRUCKS: EXTENSIVE NEW REPLACEMENT PARTS & SUPPLY INVENTORY: REPAIR EQUIPMENT & TOOLS: SHOP & OFFICE FIXTURES: AND MORE!

Rubber Tired Loader `05 KOMATSU WA500-3LK, s/n A72245

TERMS: Complete payment or a minimum requirement of 20% deposit day of sale in Cash, Certified Check or Guaranteed Funds. Balance due within 4 days.

Please Call (800) 233-6898 or Email sales@hunyady.com For Inspection Details, Additional Information, and Bid Kit!

ONLINE BIDDING THROUGH EQUIPMENTFACTS.COM.

CALL FOR INFORMATION AND PICTURE BROCHURES. Salt Lake City, UT (801) 355-4500 Wharton, NJ (973) 659-3330 Milford, NH (603) 672-4100

Columbus, OH (614) 444-4300 Providence, RI (401) 455-0200 Boston, MA (617) 427-8888

275 Route 32, North Franklin, CT 06254, (860) 642-4200, Fax: (860) 642-7900 www.petrowskyauctioneers.com

`04 KOMATSU GD555-3C, s/n 51023, Komatsu 5.9L dsl and 8 speed auto/ps trans, e/w 14’ all hydraulic moldboard, scarifier mount and controls, EROPS w/ac, and 17.5R25 tires.

www.hunyady.com FL Auction License No.: AB2215 While information is believed to be accurate, all items will be sold “As-Is, Where-Is” w/out guarantee or warranty. A physical inspection is suggested.

JLG Launches G10-43ATelehandler for Commercial, Residential Applications JLG Industries Inc. is adding a new model to the JLG line of telehandlers. The new JLG G10-43A model telehandler will be marketed for use in commercial and residential construction applications including steel erection and framing. The new model includes standard outriggers, a maximum capacity of 10,000 lb. (4,536 kg) and a capacity of 7,000 lb. (3,175 kg) at the maximum reach height of 43 ft. (13 m). “With the additional The new JLG G10-43A model telehandler will be marketed for use in commercial and capacity and a full range of residential construction applications including steel erection and framing. common JLG family attachments, the new G10-43A With the launch of this new model will provide superior performance in a available on existing G-Series telehanthe JLG branded line-up of telehanwide variety of picking and placing dlers.” In addition to the spacious cab and dlers will include a total of nine conapplications,” said Brian Boeckman, JLG product parent for telehandlers. common attachments, these models struction and three compact telehan“Operators will enjoy the same spa- feature pilot operated joystick controls, dlers models. For more information, visit cious, enhanced-visibility cab and a wrap around dashboard and easy-towww.jlg.com. comfortable operator environment read gauges.

BANKRUPTCY AUCTION Re: Lift-Tech Elevator Service, LLC

CHAMPION / ALIMAK HEK CONSTRUCTION ELEVATORS 7 Model US-60-1RN Elevators (2007 & 2006) Plus: •Gradall 534D-42 Rough Terrain Lift •Magnum Construction Generators •Scaffolding, Cross Braces, Planks & Accessories •Power Tools, Gang Boxes & Storage Containers •2007 International Rack Body Truck •2005 Ford 350 Utility Body Truck Auction Date:

TUESDAY, JULY 20 at 11am (Inspection: 9am morning of auction & by appointment)

926 NEWARK AVE. JERSEY CITY, NJ

Auction site:

(Just outside NY City – 15 min. from Newark / LIberty Airport) Terms of Sale: 25% deposit due at the time of successful bid in cash or certified funds. Company checks accepted only if accompanied by a bank letter of guarantee. NO BUYER PREMIUM! Please visit www. ajwauctions.com for a complete inventory & more information.

(908) 789-9999

Michael Sklar Steve Newmark Harry Byrnes

WWW.AJWAUCTIONS.COM

Page 118 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX 202 TRUCK & EQUIPMENT ..................................44

EQUIPMENT MART OF NEW YORK ....................27

MUSTANG MFG ....................................................94

A J WILLNER AUCTIONS

EQUIP-SALE AND LEASING CORP ......................80

NEW MILLENNIUM RENTALS ..............................12

JERSEY CITY NJ 07/20/10 ............................117

FELLING TRAILERS ..............................................55

NORTRAX ............................................................101

ACE EQUIPMENT SALES INC ..............................83

FLUID POWER ......................................................99

NPK CONSTRUCTION EQUIPMENT INC ............35

ACR EQUIPMENT CO ............................................98

FOLCOMER EQUIPMENT CORP ..........................18

OPDYKE INC ..........................................................56

ALBAN TRACTOR CO INC ......................................6

FOLEY INC ..............................................................9

PENN JERSEY MACHINERY ..................................5

ALEX LYON & SON INC

G & H SERVICE INC ..............................................37

PETERSON PACIFIC CORP ..................................76

PLAN AHEAD CALENDER ............................107

GEHL SKID STEER ..............................................102

PETROWSKY AUCTIONEERS INC

ALBANY NY 07/10/10 ....................................113

GROFF TRACTOR & EQUIPMENT CO ..................6

CANASTOTA 07/17/10 ..................................113

HISTORICAL CONST EQUIPMENT ASSO ............30

ALEX PARIS CONTRACTING CO INC ..................23

HITACHI CONSTRUCTION MACHINERY ............95

ALL ISLAND EQUIPMENT CORP ............................7

HOFFMAN EQUIPMENT INC ................................13

ALLU GROUP ........................................................49

HOOBER INC ........................................................38

ALPINE SALES AND RENTAL CORP ....................49

HOWELL TRACTOR ..............................................98

ANACONDA CONVEYORS USA INC ....................64

HUNYADY AUCTION CO

WARWICK RI 7/20/10 BROAD BROOK CT 7/30/10 ..........................117 PINE BUSH EQUIPMENT CO ................................17 PLASTERER EQUIPMENT CO INC ......................10 RANSOME CAT ........................................2,26,44,49 REMU SCREENING TECHNOLOGY ....................88 RITCHIE BROS AUCTIONEERS ..........................120

BANDIT INDUSTRIES INC ....................................72

BRODHEADSVILLE PA 07/15/10 ..................115

BARGAINS ............................................................100

SEALED BID 07/21/10 ..................................117

ROAD BUILDERS MACHINERY ............................22

BASCHMANN SERVICES INC ..............................84

HYDREMA U S INC ................................................37

ROCKLAND MANUFACTURING CO ....................39

BEST LINE EQUIPMENT ......................................19

INDECO NORTH AMERICA ..................................73

RSC EQUIPMENT RENTAL ..................................26

BINDER MACHINERY CO ........................................3

IROCK CRUSHERS ................................................88

RUBBLE MASTER ..................................................78

BODINE MFG ........................................................26

IRON PLANET

SALVAGE DIRECT INC ..........................................16

CAPITAL TRACTOR INC ........................................43

ONLINE AUCTION 06/30/10..........................109

SCHAEFER ENTERPRISES ..................................98

CEG SCALE MODELS ..........................................41

J D EQUIPMENT ....................................................38

SCREEN SERVICES ..............................................80

CHADWICK-BAROSS ............................................29

JENNINGS AUCTION

SENNEBOGEN ......................................................67

CHENANGO TRUCK ..............................................57

HERSHEY PA 07/09/10..................................115

STOLTZFUS MFG ..................................................32

CHERRY VALLEY TRACTOR SALES ..........43,56,82

JESCO ............................................................21,101

STU HARRIS ........................................................106

CLASSIFIEDS ........................................................103

JOHN DEERE ........................................................47

TEREX POWERSCREEN ......................................68

COBLE TRENCH SAFETY ....................................44

KAWASAKI CONSTRUCTION MACHINERY ..........91

THOMPSON MACHINERY USED PARTS ............98

CONSTRUCTION EQUIPMENT CO ......................69

KEESLER DIVISION OF STEPHENSON ..............11

TOWMASTER INC ..................................................59

CONSTRUCTION EQUIPMENT GUIDE ....52,62,106

KEMPER EQUIPMENT INC ..................................77

T-QUIP SALES & RENTAL INC ..............................31

COR EQUIPMENT SALES ....................................87

KENCO ..................................................................22

COSTANZI CRANE & RIGGING CO INC................49

KEYSTONE PROCESSING EQUIPMENT ............70

CRANE MATS NORTHEAST ..................................32

KING OF PRUSSIA EQUIPMENT CORP ..............46

CREAN EQUIPMENT ............................................98

KMP USA LTD ........................................................99

CUSTOM CONVEYORS & FABRICATION ............82

KOMATSU AMERICA CORP ..................................45

DAKOTA AG INNOVATIONS ................................108

KOMATSU CRUSHERS ........................................81

DANELLA USED TRUCKS & EQUIPMENT ............16

KUBOTA ..................................................................51

DOOSAN INFRACORE AMERICA CORP ..............89

LABOUNTY MANUFACTURING INC ....................93

DOOSAN PORTABLE POWER ..............................97

LIFTECH EQUIPMENT CO INC(NE) ......................18

VANTAGE EQUIPMENT ........................................15

DURATECH ............................................................87

LIUGONG CONSTRUCTION MACHINERY ..........33

VERMEER NORTH ATLANTIC ..............................46

DYNAPAC ..............................................................94

LUCKY’S TRAILER SALES ....................................57

VOLVO CONSTRUCTION EQUIPMENT ................60

EAGLE POWER & EQUIPMENT CORP ........16,119

MDS ........................................................................99

W H E N ..................................................................82

EESSCO ................................................................71

MESSICK’S ............................................................26

WESTCHESTER TRACTOR INC ..........................22

ELLIOTT & FRANTZ INC ..................................34,38

METSO MINERALS CRUSHING ............................79

WHITNEY & SON INC ............................................75

EOP ......................................................................101

METSO MINERALS SCREENING ........................85

WOODS CRW CORP ............................................20

TRACEY ROAD EQUIPMENT INC ........................25 TRANSPORT EQUIPMENT SALES ......................39 TRENCH SHORING SERVICES ............................25 TRICO EQUIPMENT SERVICES LLC ....................65 U-SCREEN ............................................................88 UTILITY AUCTIONS INC WILMINGTON DE ..........................................108

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 23, 2010 • Page 119

w w w. e a g l e p o w e r a n d e q u i p m e n t . c o m

Case CX210B with Rubber Tracks

RECENT TRADES 2007 Case 621D Wheel Loader, A/C, Ride Control, Stk# 31814 ................................................................................................$89,800

2005 Case 321D Compact Wheel Loader, 1.57 Yd Bkt, 3507 Hrs, Stk# 31800 ....................................................................$34,500

2002 Case CX240 Excavator, 3113 hrs, Stk# 31885 ..........$49,700

2004 Takeuchi TL130 Track Loader, ROPS, 2700 Hrs, Stk# 32003......................................................................................$23,500

1999 Case 586FL Forklift, 4 wd, 21 Foot Mast, Stk# 31679 .............. ......................................................................................................$21,400

2002 Case 580SM Loader Backhoe, Stk# 31931, Cab, Ext, 4 WD ..........................................................................................$33,700

Authorized Dealer for These Quality Lines: Eager Beaver & CAM Trailers • Rammer by Allied Hydraulic Hammers & Shakers • Sims Cabs & Cab Enclosures • Guest Industries Forks • Airman Portable Air Compressors • Zanetis Planers • Trailking Trailers • FFC Attachments Frank Beck

Pat DiCicco

Jim Lutz

Tom Scott

Richard Verna

Rodney Bush

Dean J. Leonetti

S. Montgomery Co.

Phila Co. & Bucks Co.

Bucks & N. Montgomery Counties

Delaware Co. & S. Chester Co.

215/870-4546

215/680-9203

215/870-8567

S. Chester Co., Cecil County, MD, New Castle Co., DE

302/530-9134

610/420-4770

Skid Steer/Trencher Specialist Delaware Co., S. Chester Co., New Castle Co. DE, Cecil Co. MD

Skid Steer/Trencher Specialist Philadelphia Co., S. Montgomery Co., Bucks Co. & N. Chester Co.

302/354-1947

215/783-1847

Dean R. Leonetti, Sales Manager

953 Bethlehem Pk (Route 309) Montgomeryville, PA 18936 215/699-5871 Fax 215/699-6416 N E W H O U R S Mon.-Fri. 7AM-5:30PM

•

215/699-5871

2211 Dupont Highway New Castle, DE 19720 302/652-3028 Fax 302/652-7540 N E W H O U R S Mon.-Fri. 7AM-5PM

55 Senn Drive Eagle, PA 610/458-7054 Fax 610/458-7094 N E W H O U R S Mon.-Fri. 7:30AM-4PM

Page 120 • June 23, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE