Northeast_14_2010 by Construction Equipment Guide

Published Nationally

Northeast Edition

$3.00

® July 7 2010 Vol. XLVIII • No. 14

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.ConstructionEquipmentGuide.com

Inside

JFK’s Bay Runway Reopens Ahead of Schedule

Groff Tractor Opens New Facility in Pa. …8

TrenchTech Eyes Improving Service With New Digs…22

Bomags roll down the runway as a plane departs from another runway at JFK International Airport.

By Mary Reed CEG CORRESPONDENT

As New York State continues to operate under emergency spending bills while its legislature wrestles with the problem of closing a deficit, a halt in payments has affected more than 500 construction projects across the state. One project that was not affected by the budget impasse was the vital Bay Runway Case Presents Its 250,000th Skid Steer…34

Table of Contents ........4 Paving Section ......53-65

reconstruction project, which recently wrapped up at New York’s John F. Kennedy International Airport. In fact, the Bay Runway reopened ahead of schedule on June 28. It’s easy to understand why this project was so important. Since it first opened in 1948, John F. Kennedy Airport, and very often the Bay Runway itself, has been New York’s gateway to the world, serving millions of passengers each year, providing tens of thousands of jobs and

Parts Section ............110 Business Calendar....122 Advertisers Index ....130

see JFK page 30

Caterpillar to Invest JESCO Widens Reach With $700M in Production Standard Equipment Deal By Josh Funk

AP BUSINESS WRITER

Attachments Section...... ..............................69-85

generating billions in economic activity. “If Kennedy Airport is to remain a portal to and from this city and our country, we must continue to invest in it through necessary infrastructure upgrades,” said Gov. David Paterson. Port Authority Executive Director Christopher Ward has even described the project as an “economic stimulus in real time.” The Bay Runway handles approximately half

OMAHA, Neb. (AP) Caterpillar Inc. said June 17 that it plans to invest almost $700 million over the next four years to start producing mining shovels and expand production of its trucks at plants in Illinois and India. The world’s largest maker of construction and mining equipment said it plans to add a new mining shovel production line at its Aurora, Ill., plant and expand truck production in Decatur, Ill., and Chennai, India. The new mining shovels will range from 125- to 800-ton see CATERPILLAR page 118

JESCO, one of New Jersey’s leading construction equipment dealerships, has expanded its territory coverage by acquiring Standard Equipment of Frederick, Md. This acquisition consists of five new locations and expands JESCO’s reach across Delaware, Maryland and the Washington D.C. metro area. “We are excited about increasing our representation of John Deere and other quality OEMs to existing and prospec-

tive customers across Delaware and Maryland,” stated Jon Robustelli, president of JESCO. “We look forward to implementing our goals and business model in these new locations and continuing our tradition of delivering outstanding customer service.” JESCO will offer John Deere heavy construction equipment as well as John Deere’s CWP line, which includes skid steer loaders, compact track loaders, see JESCO page 14

Page 2 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.ransome.com 1-877-RANSOME

2007 Cat 938G II Stk#: UP20074, S/N: CRD02494, 2307 hours, cab, air, GP bucket, forks, limited slip differential, QC, ride control $135,000

ASPHALT / PAVING / CONCRETE EQUIPMENT 2004 CAT AP-1055B, S/N: A3P00196, Stk #UT10004, 4506 hrs, 10'- 20 ' Ext-A-Mat Screed, Electric Htd Screed, Generator, Push Rollers ..................................................................................SOLD

BACKHOE LOADER 2003 CAT 430DIT, S/N: BML02490, Stk #: UT10121, 4793 Hrs, Cab, A/C, E-Stick, GP Bkt, Forks, Joystick Control, 4WD ....$43,300

1998 CAT 990, S/N: 4FR00308, Stk #: UP20035, CAT Certified Powertrain Rebuild $CALL

CLICK HERE www.ransome.com to view our LARGE fleet of used inventory.

COMPACTION EQUIPMENT - SMOOTH DRUM 2005 CAT CS-563E, S/N: CNG01235, Stk #: 92808, 1778 hours, 84" single drum dirt roller, canopy ......................................$75,000

DOZER - CRAWLER 2005 CAT D6R XL II, S/N: AAX01075, Stk #: 92811, 4551 hours, AC, SU Blade, New UC, New Injectors, New Equalizer Bar, Ripper Valve ..................................................................................$139,000 2004 CAT D6RIIXL, S/N: AAX00874, Stk #: UP20086, 2601 Hrs, Cab, A/C, 6SU-Blade, 24” Track, Wired/Plumbed for Trimble GPS .. ..........................................................................................$145,000 2005 CAT D6RIIXL, S/N: AAX01131, Stk #: UP20072, 2421 Hrs, Cab, A/C, Semi-U Blade, P&B Turned @ 1,658 Hrs ..........$139,000 2004 CAT D8R II, S/N: 6YZ01580, Stk #: 92739, 4413 hrs, cab, air, 3rd valve, SS ripper, $30,000 in UC work done ................$369,300 2004 CAT D8R II WDA, S/N: 6YZ01964, Stk #: UT10078, 6130 hours, cab, air, Caron SU blade, diff steer, Caron pads ....$279,000

ANOTHER OPTION FOR YOUR EQUIPMENT NEEDS

SCRAPER (2) 1998 CAT 627F, S/N:1DL00490, Stk#92736 & S/N:1DL00477, Stk #92735, 10,000+/- hours, cab, A/C, push pull, big tires, good cond ......................................................................................$CALL

OFF-HIGHWAY TRUCK

2008 CAT 257B2, S/N: SLK08625, Stk #: UT10105, 602 hours, cab, AC, Heat, Hi-Flow, GP Bucket ......................................$36,000 2004 CAT 277B, S/N: MDH00460, Stk #: UT10138, Cab, A/C, Heat, Aux Hyd ................................................................................SOLD

2005 CAT 735, S/N: AWR00825, Stk #92704, 3738 hrs, cab, air, liners, 23.5 R 0 25 XADN Tires at about 50 % ..................$269,000 2004 CAT 735, S/N: AWR00715, Stk #92703, 4035 hours, cab, AC, liners..................................................................................$249,000

WHEEL LOADER

EXCAVATOR - CRAWLER

2005 CAT 928GZ, S/N: DJD001847, Stk #: UP20034, 2900 Hrs, Cab, A/C, GP Bkt, 82% Life Remaining on Tires..................$87,300 2007 CAT 938G II, Stk#: UP20074, S/N: CRD02494, 2307 hours, cab, air, GP bucket, forks, QC, ride control........................$135,000 2006 CAT 950GII, S/N BAA01037, Stk# UP20079, 6525 hrs, CAB, AC, Ride Ctrl, 3rd Valve, Logging Forks, Auto Shift, CTWT .............. ..........................................................................................$119,000 2007 CAT 950H, S/N K5K00929, Stk# UP20078, 3319 hrs, CAB, AC, Forks, GP BKT, Auto Shift, CTWT ......................................$169,000

2006 CAT 303.5C CR, S/N: DMY00553, Stk #: UT10044, 698 hours, cab, air, long stick 5'10", blade, rubber pads, hammer lines ............................................................................................$39,900 2005 CAT 330CL, S/N: DKY03490, Stk #92777, 2366 hrs, 77,000 lbs, 12' 6" stick, 34" pads, 36" bkt ....................................$159,000 2003 CAT 345BL, S/N: AGS01717, Stk #92774, 4941 hrs, 100,000#, 11' stick, 36" pads, 60" bucket, pin grabber ....$165,000 2006 CAT 365CL, S/N: MCS00331, Stk #HR3179, 2121 hours, 145,450#, 25' 7" Boom, 13' 7" Stick, 60" bucket, 36" Track Pad Width ................................................................................$495,000

Used Equipment Sales: 215-245-2749

Equipment Sales Event RED TAG & YARD SALE Every Thursday, 10:30 to 1:30 March 25th through June 24th

3.9% for 36 months (Most Units) • Minimum of a 6-month powertrain warranty • Up to a 140-point inspection • Less than 50% wear on Tires and Undercarriage • Maintenance completed by Cat factory trained technician • Low hour Ransome owned Rental Fleet Equipment • Extended service coverage options

CRAWLER LOADER 2006 CAT 953C, S/N: BBX02600, Stk #: UT10083, 3577 hours, cab, air, GP bucket, serviced every 250 hours ....................$79,000 2006 CAT 953C, S/N: BBX02603, Stk #: 96098, 1,004 hours, cab, air, GP bucket, like new machine, U/C about 90% ................$CALL

SKID STEER LOADER - RUBBER TRACK

Tom Rosser Cat Certified Rental/Used equipment includes:

2004 CAT D8R II WDA Stk#: UT10078, S/N: 6YZ01964, 6130 Hours, cab, AC, Caron SU blade, diff steer, Caron pads, pins & bushings turned & new sprocket segments, minor blade repairs. . .$279,000

Used Equipment Manager:

Joe Villa 215-245-3729

There will be Special Pricing & Discounts on Select Rental, New & Used Equipment. Also Contractor supplies, Parts, Work Tools and More!!! Every Thursday Starting March 25th

2973 Galloway Road • Bensalem, PA 19020

215-943-4800

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 3

South Jersey Branch: 201 North Route 73 Winslow Township, NJ 08095

Corporate Headquarters: 2820 Hamilton Blvd South Plainfield, NJ 07080

USED EQUIPMENT FOR SALE Contact: Jim Casendino 800-562-0012 jcasendino@bindermachinery.com ASPHALT / PAVING / CONCRETE EQUIPMENT

OFF-HIGHWAY TRUCKS

1996 WIRTGEN 2100DC, S/N 3.21.259, 300 HRS, 79” DRUM W/ HT3 TOOTH HOLDERS; MERCEDES 600 HP DIESEL ENGINE; DUAL GRADE & SLOPE CONTROLS. COMPLETE REBUILD ..............................................................................................$325,000

2005 KOMATSU HM300-1, S/N 1174, 3,405 HRS, BRIDGESTONE 23.5 X R25 TIRES; A/C; AUTO-LUBE SYSTEM; BODY HEATER; TAILGATE; QUALCOM SYSTEM ..$195,000 2005 KOMATSU HM300-1, S/N 1312, 1,898 HRS, BRIDGESTONE 23.5 X R25 TIRES; A/C; BODY HEATER; LINCOLN AUTO LUBE SYSTEM; TAILGATE; QUALCOM SYSTEM .. ........................................................................................................................$235,000 2005 KOMATSU HM300-1, S/N 1310, 2,355 HRS, BRIDGESTONE 23.5 X R25 TIRES; A/C; BODY HEATER; LINCOLN AUTO LUBE SYSTEM; TAILGATE; QUALCOM SYSTEM .. ........................................................................................................................$235,000 2005 KOMATSU HM300-1, S/N 1208, 2,134 HRS, GOODYEAR 23.5 RL-2 TIRES; A/C; BODY HEATER; RETARDER; LINCOLN AUTO LUBE SYSTEM; TAILGATE ........$210,000 2005 KOMATSU HM300-1, S/N 1177, 2,307 HRS, GOODYEAR 23.5 RL-2 TIRES; A/C; BODY HEATER; RETARDER; LINCOLN AUTO LUBE SYSTEM; TAILGATE ........$215,000 2005 KOMATSU HM350-1, S/N 1081, 1,921 HRS, BRIDGESTONE 26.5 X 25 RADIAL TIRES; BODY HEATER; AUTO LUBE SYSTEM INSTALLED; QUALCOMM SYSTEM. TAILGATE ................................................................................................................$245,000 2004 KOMATSU HM350-1, S/N 1072, 3,181 HRS, BRIDGESTONE 26.5 X 25 RADIAL TIRES; A/C; LINCOLN AUTO LUBE SYSTEM; BODY HEATER; TAILGATE. QUALCOM SYSTEM ..........................................................................................................$215,000 2005 KOMATSU HM400-1, S/N A10022, 2,461 HRS, MICHELIN 26.5 X 25 RADIAL TIRES; BODY HEATER; A/C; LINCOLN AUTO LUBE SYSTEM; TAILGATE. QUALCOM SYSTEM ..........................................................................................................$275,000 2005 KOMATSU HM400-1, S/N 1230, 2,117 HRS, BRIDGESTONE 29.5 X 25 RADIAL TIRES; A/C; LINCOLN AUTO LUBE SYSTEM; TAILGATE; QUALCOM SYSTEM $295,000

COMPACTION EQUIPMENT - WALK / TOW BEHIND 2007 MULTIQUIP P33HHMR, S/N 1537982, 184 HRS, TRENCH ROLLER, HATZ LG40 18.5 HP DIESEL ENGINE; 33” DRUMS; 18,500 LBS CENTRIFUGAL FORCE. REMOTE CONTROL UNIT ..................................................................................................$18,500

CRAWLER DOZERS

2006 KOMATSU PC220 LC-8 S/N A88066, 1,163 HRS, TIER 3 ENGINE; KOMTRAX 3; 32” TRACKS; 10’ ARM; HYD CONTROL UNIT; A/C; PATTERN CONTROL CHANGE VALVE. JRB SLIDE-LOC; ESCO 48” BUCKET ........................................................$149,500

2005 KOMATSU D31PX-21A, S/N 50683, 608 HRS, 24” TRACKS; KOMSTAT II; 10’6” BLADE; OPEN ROPS; ROPS HEATER ................................................................$55,000 2006 KOMATSU D31PX-21A, S/N 51070, 452 HRS, 24” TRACKS; KOMSTAT II; 10’6” BLADE; OPEN ROPS; ROPS HEATER ................................................................$60,000 2006 KOMATSU D31PX-21A, S/N 51021, 107 HRS, 24” TRACKS; KOMSTAT II; 10’6” BLADE; OPEN ROPS; ROPS HEATER ................................................................$65,000 2006 KOMATSU D39EX-21A, S/N 1941, 544 HRS, KOMSTAT II; 20” TRACKS; 9’ BLADE; ENCLOSED CAB WITH A/C ....................................................................$75,000 2005 KOMATSU D61PX-15, S/N B40114, 778 HRS, 34” TRACKS; 6-WAY BLADE; ENCLOSED CAB W/ HEA-DEF-A/C; 100% CERT. REBUILD AT 3,965 HRS ......$125,000 2005 KOMATSU D65EX-15, S/N 67617, 1,682 HRS, 26” TRACKS; SEMI-U TILT DOZER; ADDED CWT; ENCLOSED CAB W/ HEA-DEF-A/C, NEW OEM PAINT-JOB @ 1,682 HRS ........................................................................................................$148,500 2005 KOMATSU D65PX-15, S/N 67683, 4,972 HRS, 36” AR TRACKS; POWER PITCH & TILT BLADE; ENCLOSED CAB W/ HEA-DEF-A/C; PIN & BUSHING TURN @ 4806 HRS ........................................................................................................................$125,000

CRAWLER EXCAVATORS

1996 WIRTGEN 2100DC S/N 3.21.259, 300 HRS, 79” DRUM W/ HT3 TOOTH HOLDERS; MERCEDES 600 HP DIESEL ENGINE; DUAL GRADE & SLOPE CONTROLS. COMPLETE REBUILD .......... ............................................................................$325,000

2006 KOMATSU PC138US LC-2, S/N 1904, 2,873 HRS, 24” ROADLINER PADS; 8’2” ARM; HYDRAULIC HAMMER KIT; BLADE; HYDRAULIC GEITH THUMB; ESCO 36” BUCKET ....................................................................................................................POR 2007 KOMATSU PC200 HD-8, S/N A88277, 626 HRS, TIER 3 ENGINE; KOMTRAX 3; 28” TRACKS; A/C; HD 9’7” ARM; HKX HAMMER/THUMB COMBO KIT; HAMMER AUTO LUBE WINDOW GUARD; JRB SLIDE-LOC; PSM PROGRESSIVE LINK HYD THUMB; ESCO 42” BUCKET............................................................................................$160,000 2006 KOMATSU PC220 LC-8, S/N A88066, 1,163 HRS, TIER 3 ENGINE; KOMTRAX 3; 32” TRACKS; 10’ ARM; HYD CONTROL UNIT; A/C; PATTERN CONTROL CHANGE VALVE. JRB SLIDE-LOC; ESCO 48” BUCKET....................................................$149,500 2000 KOMATSU PC228US LC-2, S/N 15511, 9,235 HRS, 28” TRACKS; 9’6” ARM; ESCO 42” BUCKET; NEW TRACK LINK ASSEMBLIES; CYLINDERS REPACKED; SERVICED & PAINTED ..............................................................................................$81,200 2000 KOMATSU PC228US LC-2, S/N 15317, 10,711 HRS, 32” TRACKS; 9’6” ARM; A/C; PARTIAL ENGINE REBUILD; FRONT END REPINNED & BUSHED; NEW HYD PUMP. CYLINDERS REBUILT; NEW UC; HKX HAMMER KIT W/ AUTO-LUBE ....$94,400 2005 KOMATSU PC270 LC-7L, S/N A86254, 2,015 HRS, 32” TRACKS; 10’ ARM; HYD CONTROL UNIT; A/C; JRB SLIDE-LOC ............................................................$185,000 2007 KOMATSU PC270 LC-8, S/N A87090, 2,380 HRS, TIER 3 ENGINE; KOMTRAX 3; 32” TRACKS; A/C; PATTERN CHANGE VALVE; YOUNG 60’ LONG FRONT; 60” BUCKET ........................................................................................................................$225,000 2007 KOMATSU PC300 LC-7E0, S/N A88848, 966 HRS, TIER 3 ENGINE; KOMTRAX 2+; 34” TRACKS; A/C; 10’6” ARM; HYD CONTROL UNIT; JRB SLIDE-LOC. ESCO 54” BUCKET ............................................................................................................$200,000 2001 KOMATSU PC400 LC-6, S/N A84212, 832 HRS, 36” TRACKS; 11’1” ARM; HYD CONTROL UNIT; A/C; JRB SLIDE-LOC; NEW LINK ASSY; HR METER INSTALLED AT 7,160 HRS; TRAMAC V56 HAMMER ................................................................$275,000 2001 KOMATSU PC400 LC-6, S/N A85043, 16 HRS, 36” TRACKS; ACTIVE MODE; A/C; 11’1” ARM; GEITH 36” BUCKET; COMPLETE CERTIFIED REBUILD ................$188,600 2005 KOMATSU PC400 LC-7L, S/N A86361, 6,519 HRS, 36” TRACKS; 11’1” ARM W/PIPING; HKX HYD CONTROL UNIT; A/C; ESCO 54” BUCKET ......................$195,000 2004 KOMATSU PC400 LC-7L, S/N A86203, 3,283 HRS, 36” TRACKS; 11’1” ARM; A/C; JRB SLIDE-LOC; ESCO 60” BUCKET ........................................................$145,000 2006 KOMATSU PC400 LC-7L, S/N A86772, 2,731 HRS, 36” TRACKS; 11’1” ARM; A/C; JRB SLIDE-LOC; ESCO 54” BUCKET ........................................................$195,000

EXCAVATOR - MINI (UP TO 12,000 LBS)

2000 KOMATSU PC400 LC-6 S/N A84122, 11,852 HRS, 36” TRACKS; 13’2” ARM; A/C; NEW MAIN CONTROL VALVE; ESCO 48” BUCKET; REPAINTED ..........................................................$85,000

2007 KOMATSU PC35MR-2, S/N 10216, 732 HRS, 12” ROAD LINER PADS; ENCLOSED CAB W/HEATER & A/C; 5’9” ARM W/PIPING; 4 WAY POWER ANGLE BLADE. WERK-BRAU HYD THUMB W/PIPING; 4 WAY POWER ANGLE BLADE; WERKBRAU 24” BUCKET ............................................................................................$40,000

2006 KOMATSU D37EX-21A S/N 5721, 538 HRS, 16” TRACKS; KOMSTAT II; 9’ BLADE; OPEN ROPS; ROPS HEATER ..................$57,500

SCRAP PROCESSING / DEMOLITION EQUIPMENT 2008 SENNEBOGEN 850M, S/N 850.0.285, 9 HRS, MAGNET SYSTEM W/25KW BALDOUR GENERATOR; 57’9” REACH; MAGNET LINK; FRONT WINDOW GUARD; ADDITIONAL LIGHTS................................................................................................$695,500

SKID STEERS 2007 ASV POSI-TRACK SR70, S/N SSB00558, 421 HRS, 15” RUBBER TRACKS; MP1 PACKAGE; ENCLOSED CAB; A/C; HEATER; HYD QUICK COUPLER; 67” BUCKET; I-R Q/D FORKS (LOOSE) ..........................................................................................$46,500 2007 ASV POSI-TRACK SR70, S/N SSB00557, 184 HRS, 15” RUBBER TRACKS; MP1 PACKAGE; ENCLOSED CAB W/HEATER & A/C; HYDRAULIC QUICK COUPLER; 67” BUCKET. 8” JRB SNOW PUSHER; ASV BUCKET ................................................$47,500 2007 ASV POSI-TRACK SR80, S/N SEB00957, 320 HRS, 20” RUBBER TRACKS; MP1 PACKAGE; ENCLOSED CAB W/HEATER & A/C; WIPER KIT; BACK UP ALARM; 72” BUCKET ..............................................................................................................$47,500 2009 ASV PT30, S/N PTA03860, 77 HRS, 11” RUBBER TRACKS; OPEN ROPS; BACKUP ALARM; UNIVERSAL MOUNT ADAPTER (LOOSE); 48” 0.25CY QDGP BUCKET ...... ..........................................................................................................................$25,000 2009 ASV PT70, S/N PTH00667, 45 HRS, 15” RUBBER TRACKS; ENCLOSED CAB; A/C; HEATER; WIPER KIT: BACK-UP ALARM; HYDRAULIC QUICK COUPLER. 74” BUCKET W/ RUBBER EDGE................................................................................$55,400 2009 ASV PT80, S/N PTI01318, 21 HRS, 20” RUBBER TRACKS; ENCLOSED CAB W/HEATER & A/C; WIPER KIT; BACK UP ALARM; HYDRAULIC QUICK COUPLER. 72” BUCKET ..............................................................................................................$60,000 2009 ASV PT80, S/N PTI01319, 9 HRS, 20” RUBBER TRACKS; ENCLOSED CAB W/HEATER & A/C; WIPER KIT; BACK UP ALARM; HYDRAULIC QUICK COUPLER. 72” BUCKET ..............................................................................................................$60,000

1999 KOMATSU PC270 LC-6 S/N A83064, 7,203 HRS,; 24” TRACKS; 10’ HD ARM W/ PIPING; HYD CONTROL UNIT; ESCO 48” BUCKET; SERVICED & PAINTED ................................................$68,500

WHEEL LOADERS 2006 KOMATSU WA320-5L, S/N A32603, 3,021 HRS, MICHELIN 20.5X25 XHAT TIRES; 3RD VALVE; ADDED CWT; A/C; JRB COUPLER & S/D BUCKET; QD FORKS ...... ..........................................................................................................................$85,000 2005 KOMATSU WA380-5L, S/N A52668, 5,228 HRS, MICHELIN 23.5XR25 XHAT TIRES; 3RD VALVE; ADDED CWT; A/C; JRB COUPLER & S/D BUCKET; QD FORKS, NEW PAINT ......................................................................................................$117,500 2006 KOMATSU WA380-6, S/N A53081, 2,010 HRS, TIER 3 ENGINE; KOMTRAX 2; MICHELIN 23.5 X R25 XHAT TIRES; 3RD VALVE; ADDED CWT; A/C; JRB COUPLER. JRB Q/D 4 CY G/P BUCKET; NEW OEM PAINT ................................................$182,000 2006 KOMATSU WA380-6, S/N 65029, 2,002 HRS, TIER 3 ENGINE; KOMTRAX 2; MICHELIN 23.5 X R25 XHAT TIRES; 3RD VALVE; ADDED CWT; A/C; JRB COUPLER. Q/D 4 CY G/P BUCKET......................................................................................$152,500

ATTACHMENTS FOR SALE

2007 KOMATSU D61EX-15E0 S/N B45024, 598 HRS, TIER 3 ENGINE; KOMTRAX 2+; 24” TRACKS; 6-WAY BLADE; ENCLOSED CAB WITH HEADEF-A/C ..............................................................$160,000

Contact: Gerry Yarka 800-562-0012 gyarka@bindermachinery.com

KOMATSU KO4PB4000A-F

JRB JRWA200GP WA150

JRB JRWA300GP WA250

ESCO EK400 42XDP

S/N A86280; ARM PC400-7 13'4" W/BKT LINK & CYL................................................$23,480

S/N 0406-187797-3; BUCKET QDGP 2.0 CY 94" W/EDGE ........................................$5,400

S/N 106-173104-1/10; BUCKET QDGP 3.0CY 106” W/EDGE ................................................$6,600

S/N RH87918; BUCKET 42”LIP 46”CUT 1.96C ............................................................$9,500

www.bindermachinery.com

Page 4 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NORTHEAST EDITION Circulated Throughout

IN THIS ISSUE SPECIAL SECTION…

ATTACHMENTS

Be sure to check out this special section! Keep up to date with the latest information on attachments.

Founder, Publisher & CEO

Edwin M. McKeon Sr.

Vice President Emeritus Northeast Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr.

Hal Ewing Edwin M. McKeon Jr. Craig Mongeau Ken Kolasinski Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

Main office

FEATURES…

GROFF TRACTOR READIES NEW LOCATION IN CRANBERRY TOWNSHIP

The new location is 15,500 sq. ft — approximately four times the size of the Valencia location.

CLAYTON BLOCK HOLDS ANNUAL DEMO DAY AT BELMAR FACILITY

Held at Clayton’s Belmar location, customers were given the opportunity to try out some of the many tools Clayton sells, including those by manufacturers DeWalt, Makita, Multiquip and Hitachi Power Tools.

22 34

TRENCHTECH UPS EFFICIENCY, SERVICE WITH NEW LOCATION

The company, which had been leasing a property in Conshohocken, Pa., decided the time was right to own its own property, and found a location in Morrisville, Pa., that fit the bill.

CASE PRESENTS 250,000TH SKID STEER TO A. FOLINO CONSTRUCTION

Case began producing skid steers in 1969 with the 1530 Uni-Loader model, and has been innovating ever since with Case-exclusive features like ride control and side lighting.

N.Y.’S TRACEY ROAD EQUIPMENT ADDS DELANEY, MUHLEMAN TO ITS SALES STAFF

Tim Delaney brings to Tracey Road Equipment’s customers 20 years of experience in the construction equipment industry, representing names such as Caterpillar, Kobelco and Ritchie Bros.

BROOKLYN BRIDGE TO RECEIVE $500M MAKEOVER; JOB TO TAKE FOUR YEARS

The federal economic recovery act provided $30 million for the effort; the rest of the funding comes from the city and other federal sources.

N.Y.’S TRI-STATE PAVING SMOOTHES THE WAY WITH LEEBOY

When Tri-State Paving Co-Owner Carl Girolamo purchased his LeeBoy 8816B with a heated electric screed, it was one of the first models of this machine off the assembly line.

96 113 122 124

CROSSWORD CLASSIFIEDS BUSINESS CALENDAR COMING AUCTIONS

EQUIPMENT… 34

102 KOMATSU D65-16 Crawler Dozer 104 LEICA Builder Series Model 300, 400 and 500 126 TOPCON AT-B Series Auto Level

• New Hampshire • Vermont • Connecticut • Rhode Island • New York • New Jersey • Delaware • Maine • Pennsylvania • Maryland/D.C. • Virginia • West Virginia • Massachusetts

Toll Free Fax Web site Editorial e-mail Advertising e-mail

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910

www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com

Edwin M. McKeon Jr. • New Jersey • Eastern Pennsylvania 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 e-mail tmckeon@cegltd.com

For advertising rates: Contact

Lou Reardon • North, Western & Central Pennsylvania • Delaware • Maryland • Northern Virginia 717/540-1518 Toll Free 888/211-5711 Fax 717/540-8184 e-mail lreardon@cegltd.com

Contact

Kent Hogeboom • New York • New England 315/823-7668 Toll Free 800/988-1203 Fax 315/823-4136 e-mail khogeboom@cegltd.com

Contact

Ed Bryden • West Virginia 440/268-9690 Toll Free 800/810-7640 Fax 440/268-9691 e-mail ebryden@cegltd.com

Contact

Rachel Slavid • New England 508/755-1585 Toll Free 800/225-8448 Fax 508/755-1584 e-mail rslavid@cegltd.com

Contact

Construction Equipment Guide Northeast Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Northeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2009, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 5

PENN JERSEY MACHINERY CALL FOR DETAILS ON THE FOLLOWING MACHINES!

FOR SALE OR RENT!

Volvo COMPACT – Built to Perform. Built to Last.

MODEL #

EQUIP. GROUP

MODEL #

DEALER ID #

YEAR

LOCATION

AIR COMPRESSORS

Comp. Whl Ldr. Comp. Excav. Skidsteer Skidsteer Skidsteer Skidsteer Skidsteer

L20B EC30 MC60B MC80B MC80B MC110B MC90B

365403 301389 365254 70102 303294 70048 303889

2008 2004 2007 2008 2007 2008 2006

St. Island Deptford Deptford Lionville Somerville Lionville Lionville

SELL PRICE $52,900 $29,500 $18,995 $23,600 $30,000 $20,250 $19,250

2006 L220E s/n V4094, 5710 hours Equipped with: • 82167-Engine Block Heater 120V, 1500W • 80885/80943-Work Lights Front/Rear, Extra • 82108-Automatic Lubrication System, Std. • 80055-134 7.0YD3 P/O STE GP Bucket • 80115-134 3PC. Bolt-OnEdge, STE Buckets $231,500 Deptford

DEALER ID #

YEAR

HOURS

LOCATION

SELL PRICE

P185WIR

370744

2006

350

Somerville

$10,900

P185WJD

387230

2007

825

Somerville

$10,900

XP185WJD

390509

2007

185

Somerville

$10,900

P185WIR

395363

2008

220

Somerville

$11,900

P185WJD

398625

2008

185

Somerville

$12,250

XP185WJD

401774

2008

200

Somerville

$12,500

HP375WIR

407338

2009

315

Somerville

$33,500

XP825WCU

398904

2008

550

Somerville

$55,900

HP1600WCU IQ

377778

2007

1700

Somerville

$110,000

0% for 12 MONTHS On All Ingersoll Rand Compressors

CHECK OUR WEBSITE www.pennjerseymachinery.com OR CALL 908-218-1919 FOR OUR COMPLETE INVENTORY!

2001 Volvo A40D, 11,800 Hours, s/n 60044.... 2005 Komatsu WA450, 4067 Hours, Equipped with: Side Dump & Forks, Reversing Fan, ECSS Boom .................................... ....Sell Price $95,000 Suspension, 90% Tires $195,000

2005 PF5510, s/n 0184444, 2639 hours, Equipped with: Omni 3E electric screed Topcon grade and slope, Sonic feed $195,000

INGERSOLL RAND Generators & Light Towers MODEL #

SERIAL ID #

YEAR

HRS

2006 2006 2006 2006 2006

4300 2955 1495 1375 1150

LOCATION

PRICE

Tower Tower Tower Tower Tower

2004 Ingersoll Rand PF5510, 2800 Hours, Omni 3A Screed, Topcon Grade Controls, Sonic Feed, Auxiliary Hydraulic Generator, All Wear Parts 50% or Better $125,000

Ready to Work! For Sale Or Rent!

MODEL #

SERIAL ID #

YEAR

HRS

400077 384097 399745 397684 397687

2008 2007 2008 2008 2008

1570 2990 3 358 480

LOCATION

PRICE

GENERATORS

LIGHT TOWERS Light Light Light Light Light

2007 Bomag 815-2, 8-15 ft screed, 250 Hours, VG Cond/Ready to Pave ................. ....................................Sell Price $45,000

368714 370055 373425 370056 371032

Somerville, Somerville, Somerville, Somerville, Somerville,

NJ NJ NJ NJ NJ

$3,700 $5,500 $5,900 $5,900 $6,250

G40 G125 G145 G185 G290

PENN JERSEY NEW LOCATION Staten Island - S I PJM Branch Store 331 Edward Curry Ave • Staten Island, NY 10314 (718) 889-0105 • Fax: (718) 889-0107 Call Salesman Bob Watt at (516) 330-7873 for all your equipment needs. Lionville Branch 120 Gordon Rd Lionville, PA 19341 (610) 363-9200

Somerville Branch 61 County Line Rd Somerville, NJ 08876 (908) 218-1919

Deptford Branch 1330 Hurfville Rd Deptford, NJ 08096 (856) 227-6400

Somerville, Somerville, Somerville, Somerville, Somerville,

NJ NJ NJ NJ NJ

$15,750 $23,000 $43,500 $41,500 $68,000

Page 6 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2000 Cat 988G, s/n 2TW00169, 13,913 Hrs $495,000

1998 Cat 980G, s/n 2KR01881, 27,816 Hrs $65,000

1993 Cat 966F II, s/n 1SL00469, 8165 Hrs $74,000

2009 Cat 928HZ, s/n CXK00584, 953 Hrs $134,000

2002 Cat 330BL, s/n 6DR05136, 13,311 Hrs $69,000

Cat Certified Powertrain Rebuild

1990 Cat 966F, s/n 4YG00249, 7376 Hrs $54,000

Westchester Tractor, Inc. 60 International Blvd • Brewster, NY 10509

845/278-7766 Fax: 845/278-4431 E-mail: equip@wtractor.com

Now Serv ing All of Connectic ut

LATE MODEL EQUIPMENT

1998 New Holland 555E, Cold Start, Cab With Heat, 4277 Hours, Well Kept Machine ......................$24,995

2006 New Holland LB90, SN: 4612, 551 Hours, Pilot Controls, 1000lb Hammer, Full Cab ................$59,995

2004 New Holland LW170B, 3199 Hours, JRB Coupler ......$84,995

SKID STEERS 2010 NEW HOLLAND L180, SN:2032, 67 HOURS, DELUXE CAB, 2 SPEED, LIKE NEW MACHINE, 96” MULCH & SNOW BUCKET............................................$33,395 2010 NEW HOLLAND L180, SN:2030, 41 HOURS, DELUXE CAB, 2 SPEED, LIKE NEW MACHINE, 96” MULCH & SNOW BUCKET............................................$33,395 2010 NEW HOLLAND L185, SN:5906, PILOT CONTROLS, DELUXE CAB, 10 HOURS, 96” MULCH & SNOW BUCKET ........................................................$35,500 2010 NEW HOLLAND L185, SN:5912, 64 HOURS, DELUXE CAB, 2 SPEED, LIKE NEW MACHINE, 96” MULCH & SNOW BUCKET............................................$35,500 2010 NEW HOLLAND L190, SN:3398, 66 HOURS, DELUXE CAB, 2 SPEED, LIKE NEW MACHINE, 96” MULCH & SNOW BUCKET ................................SOLD $35,500 2006 NEW HOLLAND L185, SN: 5839, CAB WITH HEAT/AC, 312 HOURS, 78” LOW PROFILE BUCKET ..........................................................................................$29,995 2007 NEW HOLLAND L175, SN:3424, 158 HOURS, CAB WITH HEAT, NEW TIRES .. ......................................................................................................................$32,995 2008 NEW HOLLAND L175, SN: 4511, CAB WITH HEAT, HI FLOW, 171 HOURS ...... ......................................................................................................................$33,995 2004 NEW HOLLAND LS170, 2500 HOURS, SPARE TIRE AND WHEEL ......$16,000

DOZERS 2005 NEW HOLLAND DC85 DOZER, 9’ BLADE, CAB WITH A/C, 358 HOURS ............ ......................................................................................................................$65,995 EXCAVATORS 2007 NEW HOLLAND E35, EXCELLENT, NEW CONDITION, 18 HRS, CAB WITH A/C & HEAT ..........................................................................................................$34,995 2004 NEW HOLLAND EH160, CAB WITH HEAT, MANUAL THUMB ..............$79,995 2004 KOBELCO SK30, PLUMBED, PATTERN CHANGER, CAB W/HEAT, RUBBER TRACKS ........................................................................................................$24,995 1998 KOMATSU PC150 LC-6, GEITH MECHANICAL THUMB, JRB COUPLER, 36” OEM BUCKET, 3100 HOURS ..........................................................................$37,995 2005 Volvo EC140BLC, 3770 Hours, Hyd. Thumb, Tamper, Full Cab ............$59,995

TLB’s 2008 NEW HOLLAND B95, SN7812, PILOT CONTROLS, CAB WITH HEAT/AC, 361 HOURS ..........................................................................................................$57,995 2006 NEW HOLLAND LB90, SN:4612, 551 HOURS, PILOT CONTROLS, 1000LB HAMMER, FULL CAB ....................................................................................$59,995 2006 NEW HOLLAND B110, TOOL CARRIER, PILOT CONTROLS, FULL CAB, QUICK WHEEL LOADERS 2003 NEW HOLLAND LW90, 1140 HOURS, CAB WITH A/C, 1.7 YD BUCKET ............ COUPLER ......................................................................................................$69,995 ......................................................................................................................$46,995 1998 NEW HOLLAND 555E, COLD START, CAB WITH HEAT, 4277 HOURS, WELL 2008 NEW HOLLAND W130, FULL CAB, 343 HOURS, LIKE NEW MACHINE, CLEAN KEPT MACHINE..............................................................................................$24,995 ......................................................................................................................$96,995 2009 NEW HOLLAND W110, FULL CAB, 150 HOURS, 2.25CU YD. BUCKET, LIKE CHIPPER/STUMP GRINDERS NEW MACHINE ..............................................................................................$89,995 2004 Bandit 250XP Chipper, 2300 Hrs, Extendable Tongue, Auto Feed, Lift Cylinder 2002 NEW HOLLAND LW80B, 1984 HOURS, HYD. COUPLER, NEW TIRES, 2 $16,995 BUCKETS ......................................................................................................$49,995 2005 Bandit 254XP Chipper, 1190 Hrs, Auto Feed, Quad Feed, Winch, Yoke Lift ...... 2004 NEW HOLLAND LW170B, 3199 HOURS, JRB COUPLER......................$84,995 ......................................................................................................................$24,995 2006 NEW HOLLAND LW170B, 1134 HOURS, JRB COUPLER, JRB 3.0YD BUCKET 2009 Bandit 2900T Stump Grinder, Green Teeth, 206 Hrs, Wireless Remote ............ ......................................................................................................................$89,995 ......................................................................................................................$43,995 See dealer for financing details. CNH Capital America LLC standard terms and conditions apply. Subject to customer credit qualifications. CNH Capital America LLC reserves the right to cancel any program without notice.

VISIT OUR WEB SITE

AT WWW.WTRACTOR.COM

2007 New Holland L175, SN: 3424, 158 Hours, Cab With Heat, New Tires....................................$32,995

2010 New Holland L185, SN: 5906, Pilot Controls, Deluxe Cab, 10 Hrs, 96” Mulch & Snow Bkt ........$35,500

SOLD 2010 New Holland L190, SN: 3388, 24 Hrs, Deluxe Cab, 2 Spd, Like New Machine, 96” Mulch & Snow Bkt ..............$42,995

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 7

631/643-2605 www.allislandequipment.com

Serving Nassau, Suffolk and the Five Boroughs since 1970

FEATURED PRE-OWNED MACHINERY THIS WEEK'S SPECIAL

TELESCOPIC HANDLERS

2006 Leeboy 8515 Very Clean, Electric Screed, 176 Hrs

$79,000

John Deere 570A

Gehl 4640

ALL WHEEL STEER LOADERS

Cab, Very Clean, Power Shift Transmission, Front Dozer Blade

2006, 1300 hrs

$16,900

$8,995

Gehl 5635

Kobelco SK-35

1998, high flow, new 12x16.5, 14 ply tires, 70” bucket, 3400 hours

Very Clean, 600 Hrs

$8,500

$27,500

Takeuchi TL-140

Leeboy 5000 Path Paver

SKID STEER LOADERS

0% Fin ance 48 Mo nths on cer tain model s

TRACK LOADERS 5’-9’ Paving Width 2004, 1800 Hrs

$18,900

Rent for $750 a Day Buy for $52,000

Page 8 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Groff Tractor Readies New Location in Cranberry Township Moving is never easy or fun. But the folks at Groff Tractor are excited about their upcoming move. On June 25, they shut the doors to the Valencia, Pa., location, and on June 28 opened their new digs in Cranberry Township, Pa. The new location is 15,500 sq. ft — approximately four times the size of the Valencia location. “We have been looking for alternative locations for at least five years but had not found a building or ground that was a good enough fit for our business and future growth plans. This location allows for immediate growth, and has enough space for us to continue our growth in western Pennsylvania into the future,” said Jim Shook, Pittsburgh general manager. “This facility will replace our existing Valencia operation and will greatly improve our ability to provide outstanding parts and service support, plus it will greatly enhance the image of Groff Tractor, Case CE and Wirtgen America as a major player in the Pittsburgh market,” Michael Savastio, Groff Tractor’s new facility is approximately 15,500 sq. ft. in size, nearly four times the size of its previous location.

Groff president and CEO added. For more information, visit www.grofftractor.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Groff Tractor Cranberry Township location.

Clayton Block Holds Annual Demo Day at Belmar Facility

Radio station 95.9’s Rockin Robyn and the Rat Pack provided live entertainment at Clayton Block’s demo day. Harter Equipment provided the John Deere 410J backhoe.

Customers from Wall Township, N.J., and surrounding areas took advantage of the beautiful weather on June 18 to attend Clayton Block’s annual demo day. Held at Clayton’s Belmar location, customers were given the opportunity to try

Contractors took advantage of the beautiful weather on June 18 to attend Clayton Block’s annual demo day. Harter Equipment and other exhibitors kept guests busy.

out some of the many tools Clayton sells, including those by manufacturers DeWalt, Makita, Multiquip and Hitachi Power Tools. Harter Equipment of Millstone Township, N.J., also was in attendance with

a John Deere backhoe, a Kawasaki loader, a Dynapac roller, a Gehl skid steer loader and a Kubota mini-excavator for customers to demonstrate. Vic Riga and Sean Sheehan, both of Harter Equipment, were on hand to answer questions.

In addition to the equipment, guests were treated to refreshments, prizes and music from radio station 95.9’s Rockin Robyn and the Rat Pack. For more information, call 800/6623044. CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 9

QUALITY USED EQUIPMENT • VALUE & PERFORMANCE ASSURED

1985 CAT 988B, S/N 50W7075, 52 Hrs, CAT Certified Power Train Rebuild, 11,420 Frame Hrs, 52 Hrs on PT............................$349,000

2007 CAT 963C, S/N BBD3113, 1157 Hours, AC, GP, 3V for MP Bkt or Ripper, From Dealer's Rental Fleet ........................$159,000

2007 CAT D8T, S/N KPZ02173, 157 Hrs, AC, 8SU, Ripper Valve ............................$499,000

Air Compressor

Lift - Scissor

2009 Sullair 1150XH, S/N: 2009012600; 26 Hours; New Condition, Low hours, 900/1150 CFM Towable Air Compressor ........................$120,000 2008 Sullair 1150XH, S/N: 2008121900; 465 Hours; 1150 CFM Air Compressor 350 PSIG @ 1150CFM & 500 PSIG @ 900CFM ....$108,000 1999 RAMMAX RW1404, 258 Hours; 33" drum Rammax trench rollerready to work ................................................................................$5,500

2006 GENIE GS1930, S/N 78537, 128 Hours, GS1930 self-propelled scissor lift, 19 foot ........................................................................$3,800 2007 GENIE GS2646, S/N 85785, 73 Hours ..................................$6,950 (2) 2006 GENIE GS4390RT, S/N 43006, 43659, 43' RT Self Propelled Scissor Lift ............................................................................$19,000 Ea. 2007 GENIE GS5390, S/N 44796; Contact Ed Gudaitis 732-885-8032 ..............................................................................$47,000

Dozer - Crawler

Light Tower

Compaction Equipment - Walk/Tow Behind

2007 CAT 953C, S/N BBX3020, 624 Hours, AC, GP Bucket, 2 lever control. From Dealer's Rental Fleet ......................................$145,000

2005 CAT D5G LGP, S/N RKG1641, 1,886 Hours, OROPS, PAT, From Dealer's Rental Fleet ....................................................................$59,000 2007 CAT D5G XL, S/N: WGB3661; 1,015 Hours; OROPS, Accugrade ready. From Dealer's Rental Fleet ................................................$77,000 2006 CAT D6R DS XL III, GJB333; Stk #: KGJB333; 2,435 Hours; DS,AC,6SU,70% UC System1, Call Bob Kukulski 732-261-8445 ............................................................................$194,000 2007 CAT D6T LGP, S/N: KJL451; Stk #: KKJL451; 2,997 Hours; AC, Contact Bob Kukulski for details. 732-261-8445 ......................$249,000

Excavator - Crawler

2001 CAT 365BL, S/N: 9TZ515; Stk #: C9TZ515; 10,092 Hours; Customer consignment machine located in Brooklyn NY, Contact Tom Alfano for details 732-126-8430 ................................................$135,000

Forklift - Mast

2001 CAT GPL40, 1,591 Hours; 9,000 lb, propane-powered ......$10,850

Forklift - Telescopic

2004 CAT TH560B, S/N: SLG445; 3,676 Hours; Customer Consignment, Cab, AC, Stabilizers, Pallet Forks and Bucket, Sold "AS IS"..........$55,000 2008 CAT TL943, 848 Hours; 9,000 LB Telehandler, 43' High Reach 4WD Stabilizers............................................................................$75,500 2007 Genie GTH644, S/N: 10521, 928 Hours; 6,000 LB Telescopic Forklift, 44' Reach........................................................................$36,000 2007 Genie GTH844, S/N: 10501, 577 Hours; 8,000 LB Telescopic Forklift, 44' Reach........................................................................$39,500

Generator Sets

2006 CAT CP-563E, S/N CNT1103, 797 Hrs, OROPS, From Dealer's Rental Fleet ..$85,000

2001 CAT XQ60, 10,505 Hours, Mobile diesel generator, self contained UL142 double wall fuel tank, dual voltage, accessory panel........$15,000 2001 CAT XQ105, 5,200 Hours; Mobile diesel generator, self contained UL142 double wall fuel tank, dual voltage, accessory panel........$17,000 (2) 2000-2002 CAT XQ125, 7,265-9,120 Hours; Mobile diesel generator, self contained UL142 double wall fuel tank, dual voltage, accessory panel ......................................................................................$22,000 Ea. 1999 CAT XQ225, 11,400 Hours; Mobile diesel generator, self contained UL142 double wall fuel tank, dual voltage, accessory panel........$35,000 2005 CAT XQ400, 3,175 Hours; Mobile diesel generator, self contained UL142 double wall fuel tank, dual voltage, accessory panel........$80,000 2006 Multiquip DCA125USJ, S/N: 8500500; 2,535 Hours; 110KW(137KVA) Ultra Silent Whisperwatt Generator..................$21,500

Lift - Boom

(4) 2006 GENIE S40, S/N 10229, 10184, 10171, 10225, Genie S40 Self Propelled Aerial Work Platform......................................$28,500-$33,000 2007 GENIE Z34/22DC, S/N: 7327; 5 Hrs ....................................$24,800 (4) 2006 GENIE Z45/25JRT, S/N 30136, 30129, 30136, 10225, Self Propelled Aerial Work Platform......................................$31,000-$38,000 2007 GENIE Z60/34RT, S/N: 7625; 60' Articulating Boom Lift ....$57,985

2006 CAT 735, S/N BIN503, 2,936 Hours; A/C, From Dealer's Rental Fleet ....................$249,000

2007 GENIE TML4000N, S/N 543; 716 Hours; 4 1000 watt towable light tower with generator......................................................................$3,985

Other Equipment 2007 E3000 Ground Heater, S/N 02195, 2,200 Hours; ground heater with onan generator ....................................................................$40,500 (2) 2006 HX50 Ground Heaters, S/N 295, 368 ..........................$600 Ea. (2) 2006 HX100 Ground Heaters, S/N 370, 466 ..................$975-$1000

Scrap Processing/Demolition Equipment 2008 CAT M322D MH, S/N W2T304, 2,901 Hours, Generator, Cab riser, 22'4" boom w/ check valve, 19'4" drop nose stick, no attach ....$259,000

2007 CAT D6T LGP, S/N: KJL451; Stk #: KKJL451; 2,997 Hours; AC, Contact Bob Kukulski for details. 732-261-8445..$249,000

Skid Steer 2008 CAT 226B II, S/N MJH12218, 116 Hours, Cab, Heat, Manual CPL, GP, From Dealer's Rental Fleet ....................................................$34,000 (2) 2008 CAT 236B II, S/N HEN8070, HEN7724, From Dealer's Rental Fleet ......................................................................................$35,000 Ea. 2009 CAT 246C, S/N JAY2847; 36 Hours; AC, Manual Cpl, GP, From Dealer's Rental Fleet ....................................................................$42,000 (3) 2007 CAT 252B, S/N SCP4732, SCP3935, SCP3962, From Dealer's Rental Fleet ....................................................................$39,000-$41,000 (3) 2007 CAT 256C, S/N DWS298, DWS299, DWS381, From Dealer's Rental Fleet ....................................................................$39,900-$48,000 (3) 2005-2006 CAT 287B, S/N ZSA3286, ZSA2982, ZSA1853 .................. ........................................................................................$26,000-29,900 (2) 2007 CAT 297C, S/N GCP261, GCP300 ......................................CALL

Trencher / Boring Machine / Cable Plow 1996 TESMEC 900SLO, S/N 9173; Stk #: 9173; 2,683 Hours; Customer Consignment, Contact Earl Harrar 908-561-8005 WXT 508 ......$175,000

Wheel Loader 2009 CAT 938H, S/N MJC407; 3,529 Hours; AC, 3V, Fusion Cpl, GP, New Tires, From Dealer's Rental Fleet ......................................$179,000 2008-2009 CAT 950H, S/N K5K2515, K5K1729 ........$205,000-$229,000 2006 CAT 966H, S/N A6D334; Stk #: KA6D334; 4,624 Hours; AC, GP, Call Bob kukulski 732-261-8445................................................$220,000 2007 CAT 972H, S/N A7D364; Stk #: KA7D364; 2,713 Hours; AC, Call Bob Kukulski 732-261-8445 ......................................................$270,000 2008 CAT 980H, S/N JMS4209; 1,967 Hours; AC, Ride Control, 60% Tires Remaining, 7 CY GP Bucket, Call Bob Kukulski 732-261-8445 ........ ..................................................................................................$359,000 2007 CAT 988H, S/N KBXY1234; 5,600 Hours; High Lift, New tires & bucket, Call Bob Kukulski 732-261-6404 ..................................$510,000

2008 CAT D4K XL, S/N MMM239, 1,137 Hrs, A/C, PAT Blade, System One Undercarriage..... ..........................................................$99,000

Used parts • Quality parts • Attachments Ar e you looking for a r eliable sour ce for quality used components and par ts? Outback Parts is linked nationwide with three used parts networks, so finding dependable parts fast and conveniently is never a problem. Outback Parts also supplies replacement parts for Non-Cat® machines. So when you’re needing parts, call or visit us on-line.

CAT AP-1055B PAVER, S/N ABB363, 3466 Hrs, AAS2301 Screed 10-18' ............$95,000

Call: 732/885-3005 Fax: 609/443-1146 jmeyer@foleyinc.com

W e b u y u s e d a n d s a l v a g e d m a c h i n e r y. Specializing in used Caterpillar® parts. Place your parts requests on-line at www.outbackparts.com

2008 CAT D3K LGP, S/N LLL437, 285 Hours; OROPS, PAT, From Dealer's Rental Fleet ........ ..........................................................$79,000

www.foleyinc.com Call Art Vida, Used Equipment Manager 800-939-6611 • 732-885-5555 • Fax: 732-457-0551 855 Centennial Avenue, Piscataway, NJ 08855

Page 10 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

PLASTERER EQUIPMENT CO., INC. Serving Contractors, Municipalities, and Industry since 1912 Special pricing good through 07/31/10 – cash or approved financing Subject to prior sale – Rental purchase not available 2001 John Deere 310SG Backhoe, Unit# 27780, 1565 Hrs, Cab w/Interior Trim, Suspension Fabric Seat, Synchroshift M Fwd Axle, 12.5/8018’/19.5Lx24 Rear, Extendable Backhoe, Five Function Valve, Two Lever Controls, Less Auxiliary Plumbing, Std Stab w/Rev Feet, Ldr w/Rtd & 2 Func Hyd, 7645-1.30 Cu. Yd. Lng Lip Ldr Bkt, 1150 Lb Frt Counterweight, Two Batteries-300 Min Cap, Chrome Exhaust Extension, OPS STAT Roof w/Deluxe Light, Electric Ether Starting Aid, 95 AMP Charging System, Frt Windshield Washer ....$34,900

2000 John Deere 160LC Crawler Excavator, Unit# 25849, 600 MM Triple Semi-G Shoes, Aux. Lines on Boom/Arm ...... ............................................................................$34,900

2008 John Deere 313, Unit# 41460, No package, Tires 10x16.5 Hauler, Hyd Cir Std, 2" Seat Belt w/ shoulder strap, std foot controls, electric quick tach, backup alarm kit, cab enclosure w/ wiper kit, deluxe wire harness, heater w/ defroster kit, rear counterweight, suspension seat kit, horn, PT & Hyd secure expires 8/13/2010 or 2000 Hrs ..........$18,450

2008 John Deere 315, Unit# 41462, Tires 10x16.5 Hauler, Hyd. Cir Std, 2” Seat Belt w/Shoulderstrap, Standard Foot Controls, Electric Quick Tach, Backup Alarm Kit, Cab Enclosure with Wiper Kit, Deluxe Wire Harness, Heater with Defroster Kit, Rear Counterweight, Suspension Seat Kit, Horn, PT&HYD Secure Expires 9/8/2010 or 2000 Hrs. ....................$19,350

BACKHOES 2003 John Deere 310SG, Unit# 27610, cab, 4x4, extendable backhoe, two lever controls, ride control, suspension fabric seat, aux plumbing, 1.3 cu. yd. GP bucket, AM-FM radio..................$35,675 COMPACTOR/ROLLER 2006 Sakai SV201D, Unit# 41438, 304 Hrs, 54" Drum Width, Operating Weight - 9590 Lbs., ROPS.. ............................................................................................................................................$35,900 CRAWLER DOZERS 2005 John Deere 550J, Unit# 25842, Long Track, Rear Chain Guides, 105" Blade C Frame, Hyd. Pump F Use w/o Winch, Radio, Retrieval Hitch, Chrome Exhaust, Ether Start Aid, Three Function Valve, Dual Batteries, Cab w/Heater Air Cond., AT167392 18" Std Lub Trk Shoe, Track Adjuster Relief Valve, Operator Station Accessories, Environmental Drain, Deluxe Cloth Suspended Seat ..................$51,000 SCRAPER 1976 John Deere 762, Unit# 25838, Cab, A/C, 23.5x25 Tires ..................................................$9,850

2002 John Deere 650H, Unit# 27676, Power-Angle-T Blade, Hydrostatic Transmission, Long Track, 105" Blade, ROPS ..........................................$34,900 2003 John Deere 755C II Crawler Loader, Unit# 27756, Cab w/Heater Air Cond, Lub Tr 20” 508MM Dbl Grouser, Heavy Duty Rear Bumper, GP Bkt, CRL006, Standard Track, Hyd. Transmission .. ..........$67,500

CRAWLER EXCAVATORS 2002 John Deere 230CLC, Unit# 29170, 5994 Hrs, 32” Pads, 11’10” Arm, Aux Hyd ............$71,000 2005 John Deere 450CLC, Unit# 21297, 2567 Hrs, Counter Weight Removal, Standard Boom, 12’10” Arm, 36” Pads............................................................................................................$184,525 CRAWLER LOADERS 2006 John Deere 605C, Unit# 27606, GP Bucket, Cab w/AC, V Pattern Control ....................$62,500 2006 John Deere 605C, Unit# 41488, V-Pattern Trans Control, Lub TR 18" 457MM Dbl Grouser, Cab w/Air w/Mech Cloth Seat, 1.63 GP Bkt w/teeth/back drg, 2 Addtl Lights on Cab Front, Air Susp. Cloth Seat, Seat Backrest Extension, Radio Installation, PT&Hyd Secure Expires 6/30/2011 or 3000 Hrs ...... ................................................................................................................................................$75,000 SKID STEERS 2008 John Deere 313, Unit# 41459, Tires 10x16.5 Extra-Wall, Hyd Cir Std, 2" Seat Belt w/o shldr strap, standard foot controls, backup alarm kit, horn, PT & Hyd secure expires 9/8/2010 or 2000 Hrs ..........................................................................................................................................$16,250

2005 John Deere 850J, Unit# 41458, 1720 Hrs, Cab, A/C, 128” Semi-U Blade, 24” Pads ....................$145,000

Special Customer Consignment Machines

2006 John Deere 850J, Unit# 41502, 2554 Hrs, Cab, A/C, 140” Semi-U Blade, Wide Track ................$152,500

(6) 2008 John Deere 310SJ’s, 400-800 Hrs, Cab, A/C, Ext. Stick, 1.3 Yd Loader Bkt, Pilot Controls, Ride Control............ ........................................................................$65,000 Each

2008 John Deere 850J, Unit# 82156, 256 Hrs, Cab, A/C, 140” Semi-U Blade, Wide Track ........................$249,000

For More Information, Please Call Mike Kernan (717) 443-8937

LEBANON, PA

SELLERSVILLE, PA

BETHLEHEM, PA

LEWISBERRY, PA

2550 E. Cumberland St. (717) 273-2616 (800) 225-4001

3215 State Rd. (215) 258-5700 (800) 523-2209

400 Stoke Park Rd. (610) 867-4657 (800) 587-9790

640 Lowther Rd. (717) 938-6568 (866) 787-0001

FOR QUALITY NEW AND USED JOHN DEERE EQUIPMENT, BE SURE TO VISIT OUR WEBSITE: www.plasterer.com

For additional information, please contact Leonard Leiphart at (717) 938-6568 OR Jeremy Walborn at (717) 273-2616

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 11

RENTALS • PARTS

SERVICE • SALES CRAWLER CRANES

MILLING MACHINES

JOB TRAILERS

HYDRAULIC CRANES

PAVERS

SMALL EQUIPMENT TRAILERS

INDUSTRIAL CRANES

ROLLERS

LOADALLSS

BOOM TRUCKS

ROAD WIDENERS

SALES

USED TRAILERS

Harrisburg, PA 800/325-6455

w w w. k e e s l e r s . c o m

USED EQUIPMENT w w w. s t e p h e n s o n u s e d . c o m

www.stephensonequipment.com Philadelphia, PA 610-534-0700

Lancaster, PA 877-503-4307

Wilkes-Barre, PA 866-667-6756

Pittsburgh, PA 800-692-7600

Syracuse, NY 800-368-6455

eesler Division

SERVICE • SALES

RENTALS • PARTS

Albany, NY 518-357-2200

RENTALS

STEPHENSON EQUIPMENT, INC.

SALES

RENTALS

SALES

RENTALS

LOWBED TRAILERS

Page 12 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

People, Products & Service….youʼll dig!

USED DEALS YOUʼLL DIG ! Used equipment less than 7 years & 7,000 hours includes a 6 month 500 hour $250 deductible power train protection plan. Additional plans also available. Call for details! EXCAVATORS 2005 Kobelco SK330, 2161 hrs ....$109,000

2007 JD310SJ TMC, 511 hrs ..........$69,900

2004 Kawasaki 70ZV, 1135 hrs ......$99,000

Compact w/ rubber tracks 2006 Kobelco 13SR, 781 hrs, ROPS, QC$13,900 2006 Kobelco 13SR, 707 hrs, ROPS, QC$13,900 2006 Kubota U25, 374 hrs, ROPS, QC....$23,500 Mid Size w/rubber tracks, cab, heat, A/C 2005 Kobelco 80CS, 1,374 hrs, Center Swing ...... ....................................................................$39,000 2006 Kobelco 80CS, 740 hrs, Center Swing ........ ....................................................................$49,000 2006 Kubota KX080, 460 hrs, Center Swing ........ ....................................................................$68,000 Full Size w/ Cab, heat, A/C; plumbed to end of stick; pattern control changer & metal tracks 2005 Kobelco 135SR, 948 hrs, 36” HD bkt .......... ....................................................................$69,000 2007 Kobelco SK160, 1,677 hrs, 42” HD bkt........ ................................................SOLD $87,000 2005 Kobelco SK210, 547 hrs, 42” HD bkt .......... ....................................................................$99,000 2006 Kobelco 235SR, 2,206 hrs, 42” HD bkt........ ....................................................................$99,000 2005 Kobelco SK330, 2,161 hrs, 54” HD bkt........ ..................................................................$109,000 2006 Kobelco SK290, 972 hrs, 48” HD bkt .......... ..................................................................$155,000

BACKHOES

2004 Vibromax VM46, 318 hrs ......$22,500

2007 Kubota B21, 384 hrs, 4WD, TLB w/QC ........ ....................................................................$19,500 2007 Deere 310SG, 1,198 hrs, cab, 4x4, ext hoe .. ....................................................................$60,000 2007 Deere 310SG, 600 hrs, cab, 4x4, ext hoe .... ....................................................................$64,500 2007 Deere 310TJ, 511 hrs, cab, 4x4, ext hoe, with seat mounted pilot controls (TMC) ......$69,900

SKID STEER & 4WD LOADERS 1999 Case 1845C, 2,763 hrs, SSL w/cab, heat & hi-flow..........................................................$11,750 2006 Gehl 4840E, 357 hrs, Cab w/heat ..$22,000 2007 Kubota R520, 469 hrs, 1 cu yd, skidsteer QC................................................................$36,100 2004 Kawasaki 70ZV, 1,135 hrs, 3.25 cu yds, JRB QC ........................................................$99,000 2007 Deere 444J, 497 hrs, 2.0 cu yds, JRB QC .... ..................................................................$107,000 2007 Kawasaki 80ZV, 386 hrs, 4.2 cu yds, JRB QC..............................................................$145,000

CRAWLER DOZERS 1988 Komatsu D31P, 6,928 hrs, U/C 75%, runs good ........................................SOLD $15,000 1999 Deere 450H, 3,874 hrs, LT, ROPS, 14" tracks ..........................................................$25,000 2007 Deere 450J, 385 hrs, LT, Open ROPS .......... ....................................................................$67,000 2006 Deere 450J, 384 hrs, LGP, Cab, A/C ............ ....................................................................$71,700 2006 Deere 550J, 1,467 hrs, LGP, ROPS, 24" tracks ........................................SOLD $64,700 2008 Deere 650J, 879 hrs, LGP, cab, 24” tracks .. ....................................................................$99,000

COMPACTION & MISCELLANEOUS 2006 CAM 5CAM18, 5 Ton Deck Over Trailer ........ ......................................................................$2,000 2004 Alitec, 24” Cold Planner for SSL ......$7,900 2005 Rayco RG1631, 878 hrs, 31hp stump grinder ..........................................................$7,900 2006 Vibromax 1500M, 188 hrs, 24” trench roller ......................................................................$7,900 2007 Kubota RTV900, 691 hrs, 4WD, diesel RTV ....................................................................$10,300 2005 Beuthling B325, 314 hrs, 5 ton, static roller ....................................................................$11,750 2004 Vibromax VM46, 318 hrs, 5 ton, dirt roller .. ....................................................................$22,500 2005 Vibromax VM66, 448 hrs, 7 ton, dirt roller .. ....................................................................$29,900

0% financing available on many new equipment purchases. For our complete inventory of new and used equipment visit

www.harterequipment.com

Part of the Atlas Copco Group

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 13

Contact Dan 1-978-479-5192 15 Katrina Road • Chelmsford, MA 01824

www.cbused.com

SKID STEER FORKS, #TKFORKS, 55OOLB CAPACITY, IN STOCK..............................................................$795

SKID STEER COMPACTION ROLLER, #TKCOMP, 72” .. ..........................................................................$7,600

SKID STEER BRUSH MOWER, #TKMOWER, 60”............................$3,850 72” ....................$4,500

2006 VOLVO EC160BLC, #7236, CLEAN ........$96,000

2008 VOLVO L90F, #7431..............................$142,000

2009 VOLVO L110F, #7516............................$166,000

2009 VOLVO L150F, #7491............................$245,000

2005 PETERSON 5410, #7541, RUNS GREAT .............. ......................................................................$254,000

2005 VOLVO L90E, #7522, FORKS AND BUCKET ........ ........................................................................$96,000

2006 HITACHI ZX160LC, #7344, 2 BUCKETS AND HYD. THUMB ..................................................$89,900

NEW LINK-BELT 130LX, #LB737, BUCKET, HYDRAULIC THUMB, 0%-60 MONTHS ........$119,000

NEW LINK-BELT 240LXRB, #LB744, ROAD BUILDER, HIGH AND WIDE............................................$229,000

Page 14 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Spreading Out: JESCO Acquires Five New Locations JESCO from page 1

mini-excavators and compact wheel loaders to end-users in these new areas. In addition, JESCO also will offer its emissions solution products and services to contractors bidding on work in non-attainment zones. JESCO brings with them its large equipment rental fleet along with its award- winning parts and service departments.

It also has retained a number of key Standard Equipment employees, who will continue to provide services to their respective territories. For more than 37 years, JESCO has been supplying municipalities and contractors throughout New Jersey and the New York metro area with a wide range of construction equipment including John Deere, Hitachi, BOMAG, Hypac,

Indeco, Genesis, Hydrema, Cleaire and most recently, LeeBoy and Rosco. JESCO has New Jersey branch offices located in South Plainfield, Fairfield and Lumberton, a Beacon, N.Y., location as well as its new locations in Delaware and Maryland. For more information, call 800/241-7070 or visit www.jesco.us.

BEACON

www.jesco.us 800-241-7070

FAIRFIELD NY

LI (Coming Soon)

FREDERICK NJ MD

S. PLAINFIELD

BALTIMORE DE

WHITE PLAINS

DELMAR

LUMBERTON

MIDDLETOWN

JESCO has expanded its territory coverage by acquiring Standard Equipment of Frederick, Md. This acquisition consists of five new locations and expands JESCO’s reach across Delaware, Maryland and the Washington D.C. metro area.

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ July 7, 2010 â&#x20AC;˘ Page 15

Volvo parts â&#x20AC;&#x201C; the name in reliability.

Volvo parts support is something you can depend on day after day, year after year. Count on it. Weâ&#x20AC;&#x2122;ve got the know-how, in-stock parts and support you need to keep your uptime up and your downtime down. Letâ&#x20AC;&#x2122;s work together. Letâ&#x20AC;&#x2122;s maximize your uptime through reliable parts. Visit your local Volvo dealer today.

Albany, NY

NEW YORK Batavia, NY

Syracuse, NY

(518) 220-9500

(585) 344-1931

(315) 437-2611

Page 16 â&#x20AC;¢ July 7, 2010 â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ CONSTRUCTION EQUIPMENT GUIDE

,W %RLOV 'RZQ 7R (IÃ&#x20AC;FLHQF\ 0RQH\ 'LG \RX NQRZ WKDW LW FDQ EH PRUH FRVW HIIHFWLYH IRU \RX WR UHQW WUDFWRUV DQG SDQV IURP XV WKDQ LW LV WR XVH \RXU RZQ HDUWK PRYLQJ V\VWHP" ,W LV D IDFW 6R OHW XV DQDO\]H \RXU XVDJH ZLWK RXU 3URGXFWLRQ &RVW &DOFXODWRU DW $WODQWLF 7UDFWRU ,Q WRGD\Â¶V ZRUOG LW DOO ERLOV GRZQ WR HIÂ¿FLHQF\ LQ RUGHU WR VDYH PRQH\ $WODQWLF 7UDFWRU LV FRPPLWWHG WR KHOSLQJ \RX DFKLHYH ERWK &RQWDFW *DU\ 6RUUHOOH IRU PRUH LQIRUPDWLRQ &HOO RU (PDLO JVRUUHOOH#DWODQWLFWUDFWRU QHW Oxford, 3$ PA - 0RQGD\ Monday - )ULGD\ Friday 7:30$0 AM - 530 PM,DQG and6DWXUGD\ Saturday 7:30$0 - 12 Noon 2[IRUG 30 www.atlantictractor.net ZZZ DWODQWLFWUDFWRU QHW

<RXU -RKQ 'HHUH 6WRUH :H OLYH LW

Get Luckyâ&#x20AC;¦ Get a Talbert! New Talbert 55 Ton Low Beds, 26â&#x20AC;&#x2122; deck, dropside or level deck, air ride, lift axle, 2 king pin setings and Much More.

800-877-5854 â&#x20AC;¢ 802-763-2585 Exit 3 off I-89 â&#x20AC;¢ South Royalton, VT 05068

Visit Our Website: www.luckystrailers.com

877-201-9993 â&#x20AC;¢ 802-893-6565

28 Jasper Mine Road â&#x20AC;¢ Colchester, VT 05446 â&#x20AC;¢ Fax: 802-893-6604

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 17

Pine Bush Equipment Co, Inc.

Holmes, NY Branch

East PBE, Inc.

97 Route 302 Pine Bush, NY 12566

24 Sybil Court Holmes, NY 12531

283 Pane Road Newington, CT

Phone: (845) 744-2006 Call Jack (ext 232)

Phone: (860) 665-7470 Call Lisa (ext 232)

www.pbeinc.com • view our entire inventory online! • www.eastpbe.com

2009 NEW HOLLAND C175, STK # S03968C, S/N N8M487921, 116 HRS, FULL CAB W/AIR CONDITIONER, 12” RUBBER TRACKS, UNIVERSALE HYDRAULIC COUPLER, 74” GP BKT W/BOLT-ON-EDGE, HI-FLOW, AUXILIARY WORK LIGHTS, CALL EAST PBE! ..........................................................$34,500

2004 HYPAC C830C ROLLER, STK# R1939C, S/N 531030, 1146 HRS, 66" DRUM, CAB W/HEAT, CALL EAST PBE! ................$42,000

2003 KOMATSU D155AX-5, STK# D01598C, S/N 75191, 6605 HRS, CAB, A/C, SEMI U, TRASH RACK WASTE PACKAGE, VERY GOOD U/C, RIPPER HYDRAULICS, CALL EAST PBE! ........................................REDUCED $156,000

2007 KOMATSU PC300LC-7 EO, STK # E02856R, S/N A89104, 2465 HOURS, 21’3” BOOM, 10’5” ARM, 28” TRIPLE GROUSER, NO BKT, CALL PINE BUSH! .. ..............................................................................................................$175,000

2004 KOMATSU PC200LC-7L, STK # E02867, S/N A87049, 18’8” STD BOOM, 9’7” STD ARM, 27.6” TRACK, MULTIPATTERN CONTROL, 42” BUCKET, CALL PINE BUSH! ............................................................................................$78,000

2007 KOMATSU PC160LC-7EO, STK# E02951, S/N K45064, 16’11” BOOM, 8’7” ARM, 24” GROUSER, TRK FRAME U/C, P/C VALVE, 36” BKT. W/TEETH, CALL PINE BUSH!........................................$90,000

EXCAVATORS 2001 CASE CX130, STK# E04289X, S/N DAC0713158, 6700 HOURS, EXCAVATOR 15'2" BOOM, 10' ARM, SHOE, 2 BAR STEEL 24", CALL PINE BUSH! ....................................................................................................$32,500 2004 CASE CX160, STK# E04290X, S/N DAC161826, 3250 HOURS, EXCAVATOR WITH 16'11" BOOM, 8'10" ARM, SHOE, 3 BAR STEEL 24", CALL PINE BUSH! ............................................................................................$56,200 2005 CASE CX160, STK# E04291X, S/N DAC162035, 2468 HOURS, EXCAVATOR WITH 16'11" BOOM, 8'10" ARM, SHOE, 3 BAR STEEL 24", CALL PINE BUSH! ............................................................................................$62,500 1989 CAT EL240LC, STK# E03096X, S/N 4JF00406, EXTRA 36" ROCK BUCKET, CALL PINE BUSH! ..................................................................$24,500 1996 HITACHI EX100, STK # E04174, S/N 1E301046, 4165 HOURS, EXCAVATOR W/ CAB, A/C, RADIO, STEEL TRACKS, BUCKET, CALL PINE BUSH! ....................................................................................................$24,500 HITACHI EX160LC-5, STK #E04002, S/N 13KP002216, 8400 HOURS, EXCAVATOR W/CAB & STEEL TRACKS, CALL PINE BUSH! ..................$24,900 2007 KOMATSU PC35MR-2, STK # E04007CM, S/N 9112, CANOPY, RUBBER TRACKS, 24" BUCKET, CALL EAST PBE! ..............................................$22,500 2004 KOMATSU PC50MR-2, STK# E03426, S/N 5318, EXCAVATOR WITH 55'5" ARM AND AUX., 16" ROAD LINERS, A/C, 24" TRENCHING BUCKET, RUBBER TRACKS, CALL PINE BUSH! ..................................................$26,000 1992 KOMATSU PC150LC-5, STK# E04253, S/N 6694, 9634 HOURS, CAB, STEEL TRACKS, CALL PINE BUSH! ......................................................$17,500 2004 KOMATSU PC200LC-7L, STK # E02867, S/N A87049, 18’8” STD BOOM, 9’7” STD ARM, 27.6” TRACK, MULTIPATTERN CONTROL, 42” BUCKET, CALL PINE BUSH! ..........................................................................REDUCED $78,000

2006 KOMATSU PC220LC-8, STK # E04116CR, S/N 70160, 2218 HOURS, 11'6" ARM, 28" GROUSER, 42" BUCKET, CALL EAST PBE! ................$114,500 2007 KOMATSU PC220LC-8, STK # E04130CM, S/N A88460, 2058 HOURS, CAB W/ AC, 28" GROUSER, 42" BUCKET, CALL EAST PBE!................$119,500 2002 KOMATSU PC228USLC-3, STK # E02641X, S/N 20922, 18’8” BOOM, 9’6” ARM, 42” BUCKET, CALL PINE BUSH! ..........................................$50,000 2004 KOMATSU PC228USLC-3, STK# E02583X, 910 HRS, 24” & 42” BUCKETS, HYD COUPLER, MECHANICAL THUMB, AUX HYD PIPING, 18’8” BOOM, 9’6” ARM, CALL PINE BUSH! ..............................................................$120,000 2005 KOMATSU PC300LC-7, STK# E01997C, S/N A86958, 2661 HRS, A/C, 10'6" ARM, STD. BOOM, 33" PADS, 48" BKT, CALL EAST PBE! ........................ ............................................................................................REDUCED $119,000 2007 KOMATSU PC300LC-7, STK# E01326C, S/N A86681, A/C, 2155 HRS, 33" PADS, 42" ESCO BUCKET, H.D. FRAME GUARD W/CATWALK, CALL EAST PBE! ....................................................................................REDUCED $144,000 2006 KOMATSU PC400LC-7, STK# E02310C, 2161 HRS, STD BOOM, 11'1" ARM, 31.5" TRACKS, 54" BUCKET, CALL EAST PBE! ....................$199,000 2007 KOMATSU PC400LC-7, STK # E02859CR, S/N A87682, 2211 HOURS, STD. BOOM, 11’1” ARM, 31.5” TRACKS, NO BUCKET, KOMTRAX, CALL EAST PBE! ......................................................................................................$209,000 2007 KUBOTA KX71-3, STK# E04292X, S/N 11477, 669 HOURS, EXCAVATOR W/RUBBER TRACKS, HYD. THUMB, QUICK COUPLER, 24" BKT., OROPS, CALL PINE BUSH! ..................................................................................$22,500 TELESCOPIC BOOM LIFT 1999 GROVE AMZ50XT, STK# J04288X, S/N M48623, ALL WHEEL DRIVE, COMBINATION PROPANE-GASOLINE, CALL PINE BUSH! ....................$12,000 DUMP TRAILER 1996 EZ DUMPER, EZ610DX, STK # T03324, CALL PINE BUSH! ..........$3,500

ROLLERS 2007 BOMAG BW177D-40, STK# R2423C, 3 HOURS, 66” DRUM, ROPSFOPS CALL EAST PBE!.......................................................................... $75,000 BROS SPV627VA, STK# R04003, S/N 0137, 605 HOURS, 84" SINGLE DRUM VIBRATORY ROLLER, CANOPY, CALL PINE BUSH! ..............................$10,500 CRAWLER DOZERS 2003 CASE 850K, STK # D03536, S/N JJG0296716, NARROW GAUGE DOZER, 104” BLADE, CAB W/HEAT, A/C, CAB REAR SCREEN, CALL PINE BUSH!....................................................................................REDUCED $51,000 1998 DRESSER TD8H, STK # D02341X, S/N P036226, 2796 HOURS, GOOD CONDITION, 17" SHOES, OPEN ROPS, 6 WAY BLADE, CALL PINE BUSH! ........ ................................................................................................................$29,000 1997 KOMATSU D65EX-12, STK # D03650X, S/N 61881, DOZER WITH FULL CAB, CALL PINE BUSH! ........................................................................$57,500 2003 KOMATSU D155AX-5, STK# D01598C, 6605 HRS, CAB, A/C, SEMI U, TRASH RACK WASTE PACKAGE, VERY GOOD UNDERCARRIAGE, CALL EAST PBE! ....................................................................................REDUCED $156,000 HAUL TRUCKS 2006 KOMATSU HM300-2, STK # H02876, S/N 2009, HAUL TRUCK, 21.7 CU. YD. BODY, SCISSOR TAIL GATE, CALL PINE BUSH! ........REDUCED $199,000 LOADER BACKHOES 2003 KUBOTA B21TLB, STK# T04061, S/N 61674, TRACTOR LOADER BACKHOE, CALL PINE BUSH! ................................................................$14,500 2007 KUBOTA B26, STK # B03235, S/N # 50324, 347 HOURS, LOADER BACKHOE W/HYD. THUMB, 3RD AUX. HYDRAULICS, 18” AND 66” BUCKETS, FRONT AND REAR WORKLIGHTS, FLIP PADS, CALL PINE BUSH! ......$29,900

*PRICES SUBJECT TO CHANGE AT ANY TIME *NOT RESPONSIBLE FOR MISPRINTS

OFF-HIGHWAY TRUCK 2002 MOXY MT31, STK# H02673X, 3400 HRS, HAUL TRUCK WITH TAIL GATE, CALL PINE BUSH!........................................................................$99,000 SKID STEER 2005 BOBCAT T300, STK # S03630X, S/N # 525415665, TRACK LOADER, 88" HD BUCKET, 48" PALLET FORKS/FRAME, LANDSCAPE RAKE, CALL PINE BUSH! ....................................................................................................$36,000 1999 CASE 1845C, STK # S04128, S/N JAF0040954, 3320 HOURS, CALL PINE BUSH! ..............................................................................................$9,500 2004 KOMATSU SK820-5, STK # S03442X, S/N TF50093, SKIDSTEER WITH CAB, HEAT, PALLET FORKS, STEEL TRACKS, CALL EAST PBE! ..........$21,000 2009 NEW HOLLAND C175, STK # S03968C, S/N N8M487921, 116 HRS, FULL CAB W/AIR CONDITIONER, 12” RUBBER TRACKS, UNIVERSALE HYDRAULIC COUPLER, 74” GP BKT W/BOLT-ON-EDGE, HI-FLOW, AUXILIARY WORK LIGHTS, CALL EAST PBE! ..........................................................$34,500 TRACTOR JOHN DEERE MODEL 80 TRACTOR, STK# E04224, S/N# X010160, CALL PINE BUSH! ............................................................................................$24,500 WHEEL LOADERS 2001 KOMATSU WA75-3, STK # W03846, S/N HA950798, COMPACT WHEEL LOADER, ROPS CAB, 1.05 CU. YD. BKT., CALL PINE BUSH! ..............$28,500 2001 KOMATSU WA380-3, STK# W02389CX, 9200 HRS, CAB, THIRD VALVE, FACTORY AUTO LUBE, NEW TIRES, 4.25 YD BKT, WELL MAINTAINED CALL EAST PBE! ..............................................................................................$80,300 2005 KOMATSU WA380-5, STK # W04115C, S/N A52658, 6000 HOURS, A/C, ECSS, 4.3 CU. YD. BUCKET, CALL EAST PBE! ......................................$88,000 2001 KOMATSU WA450-3MC, STK# W02330X, 10913 HRS, SOLID TIRES, 5 YD GP BUCKET, CALL PINE BUSH! ......................................................$78,900

Page 18 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Voorhees, NJ 800-232-6535 Allentown, PA 800-383-8894 Scranton, PA 800-569-1400 Elkton, MD 800-544-7127

Delmarva, DE 866-486-1400 Baltimore, MD 888-601-7500 Albany, NY 800-854-5307

Walpole, MA 800-854-5310 Springfield, MA 800-854-5306 Portland, ME 800-325-4253

Concord, NC 800-438-2250 Columbia, SC 800-915-9900 Jacksonville, FL 800-828-3055

New OX Dump Body Distributor for the Northeast Market. This Month's Specials Special Buy - Special Pricing - In Stock

New Talbert and Etnyre 65 Ton Wide Spread Capable Lowboys In Stock

NEW East Closed Top Aluminum Refuse W/F's, 50' x 96" x 100", Spring Suspension Leak Proof Floors, Compactor Compatible, 113 Cu. Yds

90 25 New Fontaine 48'x102" combo flats, spring sliding tandems, chain ties, sliding winches, LED lights, FOB Haleyville, AL

New Manac 87 Cu. Yd. Hardox 450 Steel Dumps, 40'x102"x100" single point susp., barn door, 11R245 tires Starting at $49,950 FET Inc. FOB Current Loc.

New East Hardox Steel Dumps 34' x 96" x 66" SUPER HEAVY DUTY - Demolition Trailer, Air Ride, Barn Door.

New Talbert tags, 21' deck, 6' beaver tail

LIGHT WEIGHT 9,300 LBS.

Used Late Model, Double Drops, In Stock, Hydraulic and Mechanical Necks, Flip Axles Included. Call For More Information

New Etnyre 35 Ton & 55 Ton Paver Special Low Boys, Air Ride Suspension, Tandem & Triaxle

New Fontaine Revolution Drop Decks 48' x 102” Air Speed Suspension, Stronger than Steel Side Rails, 52,000 lbs. in 4 feet

NEW TALBERT & FONTAINE 5O & 55 TON LOW BOYS, Flat Level Deck & Raised Center, 25’ & 26’ Deck Lengths, (2) King Pin Locations, Automatic 3rd Axle Air Lifts, 275/70R 22.5, 3+1 Capability, In Stock!

Excellent We Rent Lowbeds Financing We Rent Walking Floors Available

New Trail King 60 Ton Double Drop Extendable, 53' x 102", Extends up to 51', Air Suspension Flip Box and Flip Axle Included

New East walking floors, 48' long x 102" x 13', spring suspension; Keith walking floor installed.

IN STOCK

New XL Specialized 55 Ton Hydraulic Double Drops, Extendable, 3 & 2 Capable, Flip box, Spreader bar, Flip Axles, Pony motors, Alum. Wheels CALL FOR MORE INFORMATION

New Talbert & Trail King 35 Ton Lowboys 22" Deck Height, Air Ride Suspension

Visit Our Inventory at

www.haletrailer.com

New Fontaine & Talbert Dropside 55 & 60 Ton Lowboys, 26' Deck, 22.5 Wheels, Air-Ride/ Air Lift and Modular Available

New Landoll 440 & Trail King TK70SA, 50'x102", Air Ride Suspension, 20K Winch, Wireless Remote, PSI System & Dock Levelers Optional

We Rent Lowboys, Blade Trailers, Etc.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 19

USED EQUIPMENT CLEARANCE! fLfS O A THE #1 SOURCE FOR SALES, RENTALS, PARTS AND SERVICE. ENT 3A0L% R L LOCATIONS TO ils

eta

D For

RE MO MENTR IP VE EQUAN E RE! TH EFO B

SERVE YOU BETTER

WILLIAMSTOWN, NJ • PISCATAWAY, NJ • MEDFORD, NY • BRONX, NY • MARLBORO, NY

CATERPILLAR IT38G FOR SALE

Equipment Specifications Year 2001, Manufacturer Caterpillar, Model IT38G, Location Williamstown, New Jersey, Serial Number IT38GKCSX00393, Condition Used, StockNumber H01820, General Information Bucket, Forks

$64,900

2000 DAEWOO SOLAR 170 III

Equipment Specifications Year 2000, Manufacturer Daewoo, Model SOLAR 170 III, Location Williamstown, New Jersey Serial Number 0088, Condition Used, Stock Number H01670, Hours 4,693, Horse Power 113, General Information Cab, Hammer Plumbing.

$34,900

2006 JCB 8060

Equipment Specifications Year 2006, Manufacturer JCB, Model 8060, Location Piscataway, New Jersey, Serial Number 684944, Condition Used, Stock Number H01574, Hours 525, Horse Power 59, General Information Cab, Hammer Plumbing.

$49,500

SEE OUR WEBSITE FOR COMPLETE LISTINGS.

2001 GROVE

RT650E

2007 DEERE 310SG

Equipment Specifications Manufacturer Deere, Model 310SG, Location Piscataway, New Jersey, Serial Number T0310SG952693, Condition Used, Stock Number H02020, Hours 310, General Information Like new, low hours, air suspension seat, pilot B/H controls, extend-A-hoe.

$58,500

2005 LEEBOY 8515

Equipment Specifications Year 2005, Manufacturer Leeboy, Model 8515, Location Marlboro, New York, Serial Number 8515T-43806, Condition Used, Stock Number N00042, Hours 310, General Information Poly Steel Tracks, Hose Reels,Trimble Grade Control, Sonic Augers, Steering Wheel, Electronic Steer.

$78,500

Equipment Specifications Year 2001, Manufacturer Grove, Model RT650E, Location Piscataway, New Jersey, Serial Number 221671, Condition Used, Stock Number H01953, Hours 9,653, Horse Power 59.

$237,500

WE CARRY A FULL LINE OF EARTHMOVING, LIFTING, DEMOLITION AND LANDSCAPING EQUIPMENT

MAIN OFFICE PO BOX 669 300 SOUTH RANDOLPHVILLE ROAD, PISCATAWAY, NJ 08855-0669 – 732.752.3600 BRANCH OFFICE - 22 PECONIC AVENUE, MEDFORD, LONG ISLAND, NY 11763 – 631.207.2900 SOUTHERN NJ BRANCH OFFICE - 2610 SOUTH BLACKHORSE PIKE, WILLIAMSTOWN, NJ 08094 – 856.875.0036 BRONX - NEW YORK CITY - 1130-D ZEREGA AVE, BRONX, NEW YORK 10462 – 718.822.1180 MARLBORO - NEW YORK - 1440 ROUTE 9W, MARLBORO, NEW YORK 12542 – 845.236.3000

WWW.HOFFMANEQUIP.COM

Page 20 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

1999 Mantis 14010, Stk# 5670, Block, Ball, Aux Winch, 36” Pads, 54’ 3-Sect Boom, (111’ Boom Also Available for Add’l $75,000) ..........................$239,500

2006 National 13110H, 110’ Boom, 22’ SD 2005 Link-Belt HTC8675LB, Stk# 5470, 2002 Deere 270C LC, Stk# 5319, 7842 Hrs, Bed, SFO, Air Shift PTO, Downhaul Weight, 127’+67’, Aux Winch, 5700 Hrs, 16,000 Quick Coupler & Bkt ......................$58,000 Miles..........................................$399,500 Sterling LT9513, Mercedes 370HP, Stk# 4240...............................................$189,000

Compaction Equipment - Smooth Drum Raygo 304, s/n 35A202JN, Stk# 4724, 2293 Hrs ..............................$6,500 OBO

Cranes - All Terrain / Hydraulic 1990 Krupp KMK4070, s/n 5404, 125’+56’, Block, Ball, 4 Axles+Pusher Axle, Mercedes ................................................................................................$165,000 2009 Link-Belt ATC 3200, Stk# 5435 ............................................................CALL 2008 Link-Belt HTC-8660 II, s/n L8J8-0471, Stk# 4931, 60 Tons, 28.5-51’ Offset Fly, 8.5T Swvl Hkball, Aux Lifting Sheave, 15100 Lb Ctwt Removal, A/C & Heat Lower ............................................................................................................CALL

Cranes - Boom Truck 1997 JLG Taxi King, 32 Ton, Sgl Shv Blk, Fully Enc Heated Cab, Front Stabilizer, Out & Down O/R, Cummins 325HP, 6x6, AWD ........................................$80,000 1988 JLG 1250, Stk# 5161, 12.50 Tons, 3567 Hrs, 240 hp, 66.75’ Boom, Sgl Stage Jib, A2B, Steel Bed, Tool Boxes, Int’l 2574, Cummins, TM8LL Trans .......... ..................................................................................................................$24,900 2000 Manitex M1768, Stk# 5891, 17 Ton 68'+40', 7 Ton Block, Intl 4700 .......... ..................................................................................................................$39,500 2008 National 8100D, s/n 295172, Stk# 4805, 330 hp, Rear Mount, 29’6"-100’ 4-Sect Boom, 16" SD Wood Bed, Air Shift PTO, Sterling LT8513............$189,500 2009 National 18142, Stk# 5243, RM, Hour Meter, Winch Drum Rot Ind, 1290 lb Rotat Ctwt, Western Star 4900FA ..............................................................CALL 2007 Tadano TM1052, Stk# 4249, 10 Tons, Non-CDL Chassis, 52’ Boom, Radio Remote, New 2004 Sterling Acterra ..........................................................$84,500 2009 Tadano TM35100, Stk# 5063, 35 Ton, 50’ Jib, Sterling LT7500 ..........CALL

Cranes - Carry Deck 2010 Shuttlelift 7725, Enc Cab, 17’ Offset Boom Ext, Ball, Aux Light Pkg, Catalytic Converter, Stk# 5133 ........................................................................Call

Cranes - Crawler/Dragline 2008 Link-Belt 298HSL, Stk# 4975, 270’ Boom, 90’ Jib, 40T 1-SHV HKBLK, 165T 5-SHV HKBLK........................................................................................CALL 2009 Link Belt LS108H5, Stk# 5401, 100’ Boom, 8.5T SWVL HKBALL, 40T 4SHV HKBLK, Boom Folding Equip ..................................................................CALL

1998 Link-Belt LS218H, 100 Ton, AB Ctwt, 25T 1-Shv Blk, 10T Swivel Ball, A2B w/Kickout, 36" Track Shoes, All Hyd Controls, ONE OWNER..........................CALL 2009 Link-Belt 218HSL, Stk# 5383, 180’ Boom, (2) 15'Jib Exts, 15T Swvl Hkball, 80T 4-Shv Hkblk ................................................................................CALL 1999 Link Belt LS-248H II, s/n H319-2579, Stk# 381, 8241 Hrs, 50’ Tube Boom, 10’/20’/30’/40’ Tube Boom Exts, 30’ 2-Pc Tube Jib, 10’/20’ Jib Exts ............CALL 2002 Link-Belt LS308H II, Stk# 5218, 120’ Boom, Pile Driver Attach, 20T Swvl Hkball, 20T 1-Shv Q/R Hkblk, Fairlead avail for add’l $10K............................CALL 2010 Link-Belt TCC750, Stk# 5699, 35-58’ Offset Fly, 8.5T Swvl Hkball, 60T 4Shv Q/R Hkblk, Aux Lifting Sheave ................................................................CALL 1999 Mantis 14010, Stk# 5670, 45T 3-Shv Blk, 12T Ball, Aux Winch, 36” Pads, Hyd Expandable Tracks, Aux Sheave, Matched Winches Special From Mantis (Aux Same & Main), 111’ Boom is also available for an extra charge of $75,000.. ............................................................................................Crane Price $239,500

Excavators - Crawler 2006 Case CX130, Stk# 5232, 972 Hrs, 36" Dig Bkt, 60" Ditch Bkt, A/C, Aux Hydraulics ..................................................................................................$79,000 2006 Volvo EC160B LC, s/n 11263, Stk# 5032, 1110 Hrs, Dig Bkt ..........$89,900

Excavator - Mini (up to 12,000 lbs) 2006 Volvo EC55BPRO, s/n 35240, Stk# 5199, 1225 Hrs ........................$49,500

Excavators - Wheel 1997 Komatsu PW170, s/n 20428, Stk# 4558, 7525 Hrs, Dig Bkt, Tilt Ditch Bkt, QC..............................................................................................................$39,500

Forklifts 2005 Genie GTH5519, 48” Floating Fork Carriage & 48” Forks, Heated Closed Cab, Hyd Quick Attach, Stk# 3265 ............................................................$31,900

Cranes - Rough Terrain

Lift - Boom

2008 LInk Belt RTC-8030 II, Stk# 4778, Rear Seer Ind, 8.5T Swvl Hkball, 30T 3Shv Q/R Hkblk 25' Fixed Jib ....................................................................$259,500 2008 Link Belt RTC8050 II, Stk# 4822, Aux Lift Sheave, 40T 4-SHV Q/R HKBLK, 2 Winches w/2-Spd, 8.5T SWVL HKBALL ..............................................$339,500 2009 Link Belt RTC8050 II, Stk# 5214, Aux Lift Sheave, 40T 4-SHV Q/R HKBLK, 2 Winches w/2-Spd, 8.5T SWVL HKBALL ......................................................CALL 2009 Link Belt RTC-8050 II, s/n J6J9-0996, Stk# 5188, 50 Tons, 1 Winch, A/C & Heat Upper, Rear Steer Indicator, 8.5T Hkball w/Swivel, 40T 4-Shv Q/R Hkblk ...... ................................................................................................................$359,500 2007 Link-Belt RTC8065 II, Stk# 4341, 40T 4-Shv Q/R Hklbk, 8.5T Swvl Hkball, Winch Roller-2 Drum, 35-58’ Offset Fly ..................................................$349,500 2008 Link Belt RTC-8065 II, Stk# 4747, 40T 4-Shv Q/R Hkblk, 35-58' Offset Fly, 2 Winches w/2-Spd ........................................................................................CALL 2008 Link Belt RTC-8090 II, 2 Winches w/2-Spd, 35-58’ Offset Fly, 8.5T Hkball w/Swvl, 60T 4Shv Q/R Hkblk ........................................................................CALL 2008 Terex RT230-1, s/n 15200, Stk# 4581, 26-43’ Offset Jib, 7T Overhaul Ball, 30T 4-Shv Hkblk, Subheater Assy Kit, 5/8 x 450 Cable Assy ..................$259,500

1998 Terex TB44, Stk# 5805, 2WD, Dual Fuel, Good Condition, 2031 Hrs............ ..................................................................................................................$11,500 2001 Terex TB60, s/n 01630125, Stk# 4983, 3324 Hrs ..........................$23,500

Loader Backhoes 1996 Case 580L, Stk# 4901, 3934 Hrs, 4x4, Extendahoe, Cab, Wain-Roy Swinger ....................................................................................................$24,900 2004 Volvo BL60, Stk# 5043, 24" Bkt w/Teeth, 1030 lb CtWt, 92.5" 1.3 Yd3 Bkt .. ..................................................................................................................$49,900

Skid Steers 2008 ASV PT100, Stk# 4946, 72" Bucket, 48" Forks, 150 Hrs ..................$62,500 2005 ASV RC100, s/n RSD01091, Stk# 5315, 1540 Hrs ..........................$35,000 2007 Case 440CT, Stk# 5617, 800 Hrs, Hyd QC, Heated Cab, A/C, Hi Flow/Low Flow, 2 New Final Drives ..........................................................................$29,900

Wheel Loaders 1999 Volvo L70C, Stk# 5920, Q/C, Bucket, Tow Hitch, Boom Kick-out, 1420 lb. Ctwt ..........................................................................................................$42,000

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 21

Lease machines these for for approx 12-18 Mo. . monthly re HALF the ntal rate!

Featured Featured Equipment Equipment

Used Equipment Showcase

I ARTICULATED DUMP TRUCKS

I EXCAVATORS

HYDREMA 912C, 2006, Stk# 01016598C, GOOD CONDITION, 1718 HRS .......................................$77,500

JOHN DEERE 120C, 2007, Stk# 0101631620, VERY GOOD CONDITION, 812 HRS ........................$85,000

JOHN DEERE 250D, 2006, Stk# 0101548648, GOOD CONDITION, 2634 HRS...............................$160,000

JOHN DEERE 120C, 2008, Stk# 0101642087, VERY GOOD CONDITION, 561 HRS ........................$87,000

JOHN DEERE 300D, 2006, Stk# 0101548659, GOOD CONDITION, 3760 HRS...............................$140,000

JOHN DEERE 160CLC, 2006, Stk# 0101576210, VERY GOOD CONDITION, 1383 HRS..................$92,500

JOHN DEERE 350D, 2004, Stk# 0101508712, AVERAGE CONDITION, 5138 HRS...........................$99,000

JOHN DEERE 200CLC, 2006, Stk# 0101567879, GOOD CONDITION, 2050 HRS ............................$89,000

JOHN DEERE 350D, 2005, Stk# 0101538797, AVERAGE CONDITION, 4413 HRS.........................$185,000 JOHN DEERE 350D, 2006, Stk# 0101559821, GOOD CONDITION, 3189 HRS...............................$175,000 JOHN DEERE 400D, 2003, Stk# 0101492376, AVERAGE CONDITION, 6555 HRS.........................$100,000 JOHN DEERE 400D, 2005, Stk# 0101538800, GOOD CONDITION, 4370 HRS...............................$195,000 JOHN DEERE 400D, 2005, Stk# 0101538799, AVERAGE CONDITION, 5396 HRS.........................$155,000

I BACKHOE LOADERS

JOHN DEERE 225CLC RTS, 2005, Stk# 0101538818, GOOD CONDITION, 2292 HRS.....................$99,000 JOHN DEERE 225CLC RTS, 2007, Stk# 0101615925, VERY GOOD CONDITION, 1225 HRS .......$105,000 JOHN DEERE 240DLC, 2006, Stk# 0101575941, GOOD CONDITION, 2119 HRS..........................$125,000 JOHN DEERE 240DLC, 2006, Stk# 0101576208, AVERAGE CONDITION, 2685 HRS....................$105,000 JOHN DEERE 240DLC, 2006, Stk# 0101574224, VERY GOOD CONDITION, 1743 HRS ...............$135,000 JOHN DEERE 350DLC, 2007, Stk# 0101633611, VERY GOOD CONDITION, 2428 HRS ...............$214,500 JOHN DEERE 370C, 2005, Stk# 0101548540, AVERAGE CONDITION, 4411 HRS...........................$99,000

JOHN DEERE 310J, 2009, Stk# 0101672168, VERY GOOD CONDITION, 512 HRS.........................$69,000

JOHN DEERE 450CLC, 2005, Stk# 0101538887, AVERAGE CONDITION, 4437 HRS ....................$199,000

JOHN DEERE 310SG, 2006, Stk# 960634A1, VERY GOOD CONDITION, 2000 HRS........................$49,000

JOHN DEERE 450DLC, 2007, Stk# 0101609731, GOOD CONDITION, 2785 HRS..........................$229,000

JOHN DEERE 310SG, 2006, Stk# 960661A2, VERY GOOD CONDITION, 2000 HRS........................$46,000

JOHN DEERE 450DLC, 2008, Stk# 0101655654, VERY GOOD CONDITION, 1920 HRS ...............$290,000

JOHN DEERE 310SJ, 2007, Stk# 0101622925, VERY GOOD CONDITION, 1322 HRS ....................$60,000

JOHN DEERE 600CLC, 2005, Stk# 0101551962, GOOD CONDITION, 3151 HRS ..........................$300,000

JOHN DEERE 310SJ, 2007, Stk# 0101623582, VERY GOOD CONDITION, 1125 HRS ....................$59,000

JOHN DEERE 80C, 2005, Stk# 0101541734, AVERAGE CONDITION, 2833 HRS.............................$39,000

I COMPACT EXCAVATORS

JOHN DEERE 80C, 2006, Stk# 0101581984, GOOD CONDITION, 1394 HRS ...................................$46,000

JOHN DEERE 27D, 2009, Stk# 0101109220, EXCELLENT CONDITION, 54 HRS .............................$28,500 JOHN DEERE 27D, 2009, Stk# 0101116790, VERY GOOD CONDITION, 299 HRS ..........................$26,500 JOHN DEERE 50D, 2007, Stk# 0101072127, VERY GOOD CONDITION, 791 HRS ..........................$39,000 JOHN DEERE 50D, 2007, Stk# 0101068726, 210 HRS .......................................................................$45,000 JOHN DEERE 60D, 2008, Stk# 0101097281, VERY GOOD CONDITION, 568 HRS ..........................$52,500

I COMPACT TRACK LOADER

I FORKLIFTS GENIE GES-45, 2007, Stk# 01016752D, GOOD CONDITION, 767 HRS.............................................$63,745 GENIE GE45/25, 2007, Stk# 01016752C, VERY GOOD CONDITION, 489 HRS.................................$54,425 GENIE GS-2668, 2007, Stk# 01016752A, VERY GOOD CONDITION, 453 HRS ................................$29,950 GENIE GS-2668, 2007, Stk# 01016752B, VERY GOOD CONDITION, 358 HRS ................................$29,950 GENIE GS1930, 2007, Stk# 010117973, GOOD CONDITION, 1 HR......................................................$6,500 GENIE GS1930, 2007, Stk# 010117965, VERY GOOD CONDITION, 1 HR...........................................$6,500

JOHN DEERE CT322, 2007, Stk# 0101069741, VERY GOOD CONDITION, 541 HRS ......................$27,500

GENIE GS1930, 2007, Stk# 010134059, VERY GOOD CONDITION, 1 HR...........................................$6,500

JOHN DEERE CT322, 2007, Stk# 0101073499, EXCELLENT CONDITION, 10 HRS .........................$36,500

INGERSOLL RAND VR1056C, 2007, Stk# 01016592, VERY GOOD CONDITION, 437 HRS..........$140,000

JOHN DEERE CT332, 2008, Stk# 0101077444, VERY GOOD CONDITION, 909 HRS ......................$29,000

INGERSOLL RAND 642C, 2006, Stk# 01016715A, GOOD CONDITION, 1160 HRS .......................$140,000

I COMPACTION EQUIPMENT

I HAMMER / BREAKERS

BOMAG 120AD, 2007, Stk# 01017091A, VERY GOOD CONDITION, 462 HRS.................................$28,000

INDECO HAMMERS IHC130, 2005, Stk# 01016702G, GOOD CONDITION, 1 HRS..........................$10,500

BOMAG 120AD, 2008, Stk# 01016650A, VERY GOOD CONDITION, 448 HRS.................................$27,000

INDECO HAMMERS 10000#, 2002, Stk# 01010000183, GOOD CONDITION, 1 HRS......................$55,000

BOMAG 145D-3, 2005, Stk# 01016658C, GOOD CONDITION, 884 HRS...........................................$32,000

INDECO HAMMERS 12000#, 2003, Stk# 0101002084, GOOD CONDITION, 0 HRS ........................$75,500

BOMAG 145D-3, 2007, Stk# 01017091E, VERY GOOD CONDITION, 384 HRS................................$45,000

INDECO HAMMERS 1750#, 2002, Stk# 01010000264, VERY GOOD CONDITION, 1 HRS................$5,000

BOMAG 177, 2007, Stk# 01017091F, VERY GOOD CONDITION, 455 HRS.......................................$65,000 BOMAG 177D-3, 2003, Stk# 0101061499A2, GOOD CONDITION, 1052 HRS..................................$36,000 BOMAG 213D-4, 2007, Stk# 01017133A, VERY GOOD CONDITION, 248 HRS................................$90,000 BOMAG 213D-4, 2007, Stk# 01017133B, VERY GOOD CONDITION, 368 HRS................................$99,000

INDECO HAMMERS 2000#, 2002, Stk# 01010001841, VERY GOOD CONDITION, 1 HRS .............$21,500 INDECO HAMMERS 2000#, 2004, Stk# 01010002098, VERY GOOD CONDITION, 51 HRS ...........$15,500 INDECO HAMMERS 3000#, 2003, Stk# 0101000983, VERY GOOD CONDITION, 38 HRS................$7,500 INDECO HAMMERS 6000#, 2004, Stk# 01010000283, GOOD CONDITION, 1 HRS ........................$18,000 INDECO HAMMERS 7500#, 2003, Stk# 01010001425, VERY GOOD CONDITION, 5 HRS .............$45,000

BOMAG 278D, 2007, Stk# 01016616, VERY GOOD CONDITION, 543 HRS....................................$116,000

INDECO HAMMERS 8000#, 2005, Stk# 01016702F, VERY GOOD CONDITION, 2 HRS...................$54,500

INGERSOLL RAND DD-90HF, 2004, Stk# 0101176986A1, VERY GOOD CONDITION, 1694 HRS..$39,000

INDECO HAMMERS 8000#, 2007, Stk# 01016747A, VERY GOOD CONDITION, 55 HRS ...............$94,500

INGERSOLL RAND DD-90HF, 2004, Stk# 0101178129A1, GOOD CONDITION, 1250 HRS.............$39,000

INDECO HAMMERS 8000#, 2007, Stk# 01016747B, VERY GOOD CONDITION, 1 HRS..................$94,500

I CRAWLER DOZERS

I SKID STEERS

JOHN DEERE 1050C, 2005, Stk# 0101538908, AVERAGE CONDITION, 2697 HRS.......................$196,000

JOHN DEERE 270, 2004, Stk# 0101934514A1, GOOD CONDITION, 765 HRS.................................$19,500

JOHN DEERE 450J, 2006, Stk# 0101568199, GOOD CONDITION, 1438 HRS..................................$43,500

JOHN DEERE 315, 2008, Stk# 0101093401, VERY GOOD CONDITION, 183 HRS...........................$20,000

JOHN DEERE 650J, 2007, Stk# 0101620598, VERY GOOD CONDITION, 1074 HRS.......................$82,500

JOHN DEERE 332, 2007, Stk# 0101066751, VERY GOOD CONDITION, 793 HRS...........................$30,500

JOHN DEERE 650J, 2007, Stk# 0101634089, EXCELLENT CONDITION, 358 HRS..........................$85,000 JOHN DEERE 750C, 2004, Stk# 0101933757A1, GOOD CONDITION, 2862 HRS ..........................$145,000 JOHN DEERE 750C, 2005, Stk# 0101529966, GOOD CONDITION, 2526 HRS...............................$122,000 JOHN DEERE 850C, 2004, Stk# 0101509304, AVERAGE CONDITION, 3648 HRS.........................$145,000 JOHN DEERE 850C, 2005, Stk# 0101528588, GOOD CONDITION, 2361 HRS...............................$105,000 JOHN DEERE 850J, 2006, Stk# 0101564176, GOOD CONDITION, 2531 HRS ...............................$170,000

I DEMOLITION TOOLS

2000 Case 590 Super L Series 2 – 4X4, Cab No A/C, MP Bucket, 2,369 Hours, S/N 285864, STK#285864A1 Asking $29,500

INDECO HAMMERS 5000#, 2005, Stk# 010100003743, GOOD CONDITION, 7 HRS......................$40,500

BOMAG 266AD4, 2008, Stk# 01016650D, VERY GOOD CONDITION, 331 HRS ............................$113,000

I TRACTOR LOADER BACKHOE JOHN DEERE 110TLB, 2006, Stk# 0101038876, VERY GOOD CONDITION, 624 HRS ....................$30,000

I WHEEL LOADERS JOHN DEERE 444J, 2008, Stk# 0101650811, EXCELLENT CONDITION, 319 HRS........................$114,000 JOHN DEERE 544J, 2007, Stk# 0101613360, GOOD CONDITION, 1478 HRS ...............................$102,000 JOHN DEERE 544J, 2007, Stk# 0101623853, GOOD CONDITION, 1778 HRS..................................$99,000 JOHN DEERE 644J, 2006, Stk# 0101576214, GOOD CONDITION, 4199 HRS ...............................$119,000 JOHN DEERE 644J, 2006, Stk# 0101591669, EXCELLENT CONDITION, 1713 HRS......................$140,000

GENESIS EQUIP LXP200, 2008, Stk# 01016647, GOOD CONDITION, 40 HRS ................................$73,500

JOHN DEERE 744J, 2004, Stk# 0101593622A1, AVERAGE CONDITION, 6764 HRS.....................$115,000

GENESIS EQUIP LXP300, 2007, Stk# 01016602, GOOD CONDITION, 1 HRS ................................$191,500

JOHN DEERE 744J, 2007, Stk# 0101631888, EXCELLENT CONDITION, 1428 HRS ....................$265,000

GENESIS EQUIP LXP400, 2007, Stk# 01016606C, GOOD CONDITION, 1 HRS..............................$217,000

JOHN DEERE 824J, 2003, Stk# 0101586898A1, AVERAGE CONDITION, 9014 HRS.......................$83,000

NEW LOCATIONS NOW OPEN IN...

NEW 2010 CAM 20 Ton Trailer – Deck Over Split Tilt, Full Wood Deck, 4' Diamond Plate Approach, Stk# 014340, S/N# 26103 Asking $19,500

Middletown, DE • Frederick, MD • White Plains, MD Delmar, MD • South Baltimore, MD

Keith Price

Eric Paterno

Anthony Falzarano

Mike Hatter

Fairfield, NJ 07004 1275 Bloomfield Ave PH 973-227-2221 or 800-321-8080 FX 973-575-5553 WEB www.jesco.us

Lumberton, NJ 08048 1790 Route 38 PH 609-267-2020 or 888-217-0600 FX 609-261-8559 WEB www.jesco.us

S. Plainfield, NJ 07080 118 St Nicholas Ave PH 908-753-8080 or 800-241-7070 FX 908-753-7853 WEB www.jesco.us

Beacon, NY 12508 495 Fishkill Avenue PH 845-831-1800 or 800-724-0725 FX 908-821-1671 WEB www.jesco.us

2007 John Deere 410J TMC Backhoe Loader – Quick Coupler, Cab, A/C,, AM/FM/CD, 778 Hrs, Stk# 614483, S/N# 149664 Asking $79,000

Page 22 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

TrenchTech Ups Efficiency, Service With New Location TrenchTech Inc. recently moved a relatively short geographic distance — 25 minutes to be exact — but is finding its new facility a vast improvement over its old home. The company, which had been leasing a property in Conshohocken, Pa., decided the time was right to own its own property, and found a location in Morrisville, Pa., that fit the bill. “When we were in Conshohocken our storage yard was a half a mile from our office and our shop was in between. So, we had issues with efficiency — getting things done, information sharing, getting trucks loaded quickly and things of that nature — just because of the delay in getting the information from one point to the other,” said Jay Kerrigan, company president. “You try to do it electronically and telephonically but a lot of times you need to do it physically. You have to be there to actually see what you’re doing. So the fact that we are consolidated here has made us much more efficient — very quickly.” Kerrigan believes his customers are already seeing the difference. “Our response time has always been very good, but it’s better now than it’s ever been. I can literally look out the window and see what I need and know it’s there and get the process started with getting a load … We deliver 95 percent TrenchTech’s new facility, located on Old Bristol Pike in Morrisville, is on approximately 15 acres of land. The building is 7,500 sq. ft., 6,800 of which is industrial of what we rent so it’s very critwarehouse. A 6,000 sq. ft. fabrication shop will be built ical to our customers that we’re in the next several months. able to deliver very quickly. And get there when we say we’re going to get there. When we fleet on the east coast in one location.” promise something we strive to TrenchTech primarily handles the mid-Atlantic region, meet that promise the best we from New York to Virginia, and out to the middle of can and the fact that we’re much Pennsylvania. more efficient at this location “We [also] do a lot of business in Maryland, a lot of busigives us the ability to hit that ness in Delaware. We’re really starting to make inroads in mark – almost 100 percent of New York,” Kerrigan said. the time. TrenchTech currently has 17 employees, including three “We’ve always been pretty people in the field selling and assisting customers with conscientious about keeping our technical issues and a four person administrative staff. The rental fleet in good shape, but remainder of the employees are drivers and yard personnel the conditions that we were and shop personnel working in Conshohocken The new facility, located on Old Bristol Pike in weren’t conducive to the type of TrenchTech carries just about any product that is available in the pre-manuMorrisville, is on approximately 15 acres of land. The welding that we need to do. It factured shoring industry. building is 7,500 sq. ft., 6,800 of which is industrial warecaused some problems for the house. A 6,000 sq. ft. fabrication shop will be built in the guys — they had to weld outAbout the Company next several months. side, sometimes they had to weld in adverse conditions. Founded in 1990 in Toms River, N.J., TrenchTech Now that we have this facility — and we’re adding the fabLooking Ahead rication shop as well — our quality control will be much moved to Philadelphia in 1996. In the winter of 2002 it moved to Conshohocken. TrenchTech also recently opened a location in better. Soon as something comes in and is cleaned and we “We are strictly a shoring company. We provide systems Baltimore, located off route I-695, which includes a lay know there is a problem with it, it goes right into the shop for supportive excavation on a sale or rental basis,” said down yard and a warehouse. and is repaired right away. Which is important in a lot of “We’re just getting that off the ground,” Kerrigan said, ways because it doesn’t slow the customers’ job down Kerrigan. “We have just about any product that is available in the adding that contractors will enjoy the same services as they when the equipment is operating efficiently and the way pre-manufactured shoring industry. From aluminum do at the Pennsylvania location. it’s supposed to. And also it guarantees the equipment is hydraulic shoring to aluminum panel boxes, larger aluFor more information, call 215/547-3800 or visit structurally sound and safe. minum trench boxes, steel trench boxes, slide rail systems, www.shoringsolutions.com. “Basically, in a nutshell, we have an increased ability to (This story also can be found on Construction better respond to folks and keep the equipment in better stone boxes – pretty much anything available in the premanufactured industry we have here. And our rental fleet is Equipment Guide’s Web site at www.constructionequipoperating condition. And those are the two keys to our servworth about $15 million. It’s most likely the largest rental CEG mentguide.com.) ice and quality product,” Kerrigan said.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 23

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees WHEEL LOADERS

OFF ROAD HAULERS

Komatsu WA180-1, 1996, EROPS, Quick Coupler, Exc. Condition . . . . . . . . . . . . . . . . . . . . . . . . .$46,500 Komatsu WA250-3PT, 1999, EROPS w/AC, JRB coupler, bucket, forks 20.5x25, good cond. . . . .$63,500 Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . .$100,000 Cat 936E, 1989, EROPS, 2.75 cy GP bkt, clean . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59,000 New Holland LS170 Skid Steer, 2004, 300 hrs . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,000 John Deere 624G, 1996, EROPS, quick coupler, GP bkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$66,000

Komatsu CD60R-1 Crawler Dump Truck, 1997, 360° rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66,000 Terex TA40, 2000, 6WD, 6x6, 40 ton Detroit 60 Series, Clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$142,500 Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready . . . . . . . . . . . . . . . . . . . .$127,500 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday . . . . . . . . . . . . . . . . . . . . . . .$145,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt .$115,000 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition . . . . . . . . . . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites . . . . . .$87,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites $89,000 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500

COMPACTORS IR DD22, 1993, 39" double steel, vibratory, Deutz dsl, water spray, v. good . . . . . . . . . . . . . . . . . . . .$18,500 IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 IR SD70D, 2000, Pro-Pac, 66" smooth drum, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000 Cat 825B, 1975, cab, S-blade, 50% front, 20% rear tires, good runner, can go to work . . . . . . . . .$52,500 Cat 825C, 1988, EROPS, S-blade w/tilt, rear 80%, front 60%, good condition . . . . . . . . . . . . . . . . .CALL Galion S4-6B, Deutz dsl, hydrostatic, 42” drums, transport wheels, water spray . . . . . . . . . . . . .$4,800 Hypac C747B, 2001, articulated, vibratory, 47” drums, water spray, Deutz 2 cyl, 5500#, good condition . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500 Hypac C850B, 1999, ROPS w/cab, 84” smooth drum, drive, Cummins, 18-26 tires . . . . . . . . . . . . . .$47,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500 (2) Champion Superpac A421 . . . . . . . . . .$11,500

CRAWLER TRACTORS Cat D4H Series II, 1990, OROPS, 6 way blades, 18" pads, draw bar, 100% Cat U/C . . . . . . . . . . .$57,000 Cat D6H, 1988, OROPS, S-blade w/tilt . . . .$76,000 Cat D6H LGP Series II, 1993, EROPS, diff steer, drawbar, 30" pads, fresh undercarriage . . . .$89,000 Cat D6H, 1987, Semi U blade w/tilt, ROPS, fair U/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,000 (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea Komatsu D37P-5, 1997, 24" Pads, OROPS, P/S . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36,500 LANDSCAPING

Case 480 Broom Tractor, frt mounted 6' sweepster broom, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . .$13,000 Case/IH 485 Utility Tractor,1986, Case 3 cyl dsl engine, 55 gal water tank . . . . . . . . . . . . . . . . . . . . . . . . .$10,500 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" hydraulic broom . . . . . . . . . . . . . . . . . . . . . . . . . .$11,500 Taylor-Way 12' Transport Disc, 24" discs, (4) tires, hyd lift, exc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd CRAWLER LOADERS Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt . . . . .. angle tongue, scrapers, 2” axles . . . . . . . . . . . . .$9,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37,500 AIR COMPRESSORS Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000 IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . . . .CALL

SPECIALS TRUCKS & TRAILERS Vermeer 5800 Trencher, 1997, 4 cyl dsl eng .$17,500 (2) 48' Box Vans w/Liftgates, Good Condition . . . . .. (12) IR L6-4MH Light Plants, 1992-1995, all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL IAmerican Augers 16" Boring Machine, 10 HP gas, CRUSHING & CONVEYING 35,000# thrust, 30' track . . . . . . . . . . . . . . . . . . . .$7,500 Power Screen, Mark II, 1987, Port. Screening Plant, BACKHOES Double Deck, 24'x40' . . . . . . . . . . . . . . . . . . .$36,000 Cat 416C IT, 2000, 4x4, OROPS, Quick Coupler, GP Viper 301 Portable Screening Plant, 1997, dsl, 5'x7'. Bkt, Extendahoe . . . . . . . . . . . . . . . . . . . . . . . . .$36,000 Case 580L Rubber Tire Loader Backhoe, 1997, side & rear conveyors, T/A carrier . . . . . . . . . . .CALL OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . . .$24,500 DRILLS Volvo BL70, 2003, 4x4, Extend-A-Hoe, EROPS, 24" Bkt, Like New . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59,500 John Henry Drill Mtd on Cat 320N, 1994, 24' mast, Duraquip dust collection . . . . . . . . . . . . . . . .$150,000 MOTOR SCRAPERS Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good John Henry Drill Mtd on Cat 320L, 1994, 24' drill, condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL carousel, dust collector . . . . . . . . . . . . . . . .$162,500 Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL CRANES HYDRAULIC EXCAVATORS JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick coupler, 6-7000 hrs, Fleet maintained . . . . . . . . .$39,000 Hitachi UH181, 1985, Equipped w/hammer . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$72,000 Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber, operational . . . . . . . . . . . . . .$10,500/OFFER Cat 215BLC, 1985, 7'3" stick, 28" TBG pads, 10 roller U/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $31,500 Cat 313B-CR, 2001, zero tailswing, A/C & AM/FM, JRB quick coupler . . . . . . . . . . . . . . . . . . . . .$93,000 Kobelco SK200LC Extra Long Reach, 1993, 32" TBG pads, 42' reach, nice . . . . . . . . . . . . . . .$68,500 Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6" TBG pads, work ready . . . . . . . . . . . . .$57,000 (5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . .CALL Komatsu PC750 LC-6, 1999, 454 hp, 27” boom, 11’10” stick, 44’ DGB, aux plumbing, bucket choice, 24k ctwt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$255,000 Komatsu PC400 LC-6LK, 1999, 10’6” stick, JRB coupler, 31.5” TBG, ctwt removal, choice of bkt .$77,500 Komatsu PC400 LC-6LK, 11’1” stick, 35.5” TBG, ctwt removal, choice of bkts, working everyday . .$97,500 Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB coupler, plumbed, 8’6” width, nice, work ready CALL Volvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing very good condition . . . . . . . . . . . . . . . .$205,000

Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 Drott 3330B Carry Deck, 7.5 ton capacity, dsl, 4 section boom 8' jib . . . . . . . . . . . . . . . . . . . . . . . .$14,500 Shuttlelift Model 3330 ELB Hyd. Carry Deck Crane, duel fuel, elec. winch w/remote control, exc. Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32,500

MISCELLANEOUS (2) Balderson Broom Attachment for Cat IT Machines, 8' wide, good condition . . . . . .$4,000 ea.

ATTACHMENTS BUCKETS PC1000, 84" Digging Bucket . . . . . . . . . . . .$9,500 Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 (5) Cat 936/926/950 pallet forks, for a Balderson quick coupler, exc. cond. . . . . . . . . . . . . . . . . . . .$3,500 Ea Others Available Call Prices Are Negotiable - At Your Inspection All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.

Page 24 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

USED TRUCK & EQUIPMENT SALES 1361 Conshohocken Rd., Plymouth Meeting, PA 19462

(610) 277-0100 HYDRAULIC EXCAVATOR

CREW CAB

REDU CED!

I N T E G R I T Y • P E R F O R M A N C E • VA L U E

Debt Recovery for the Construction Industry Your delinquent customers represents $$ money that you can’t spend!

2005 Ford F550 Crew Cab, Aerial Lift 1999 CASE 9010B, Aux. Hyd, 2985 Hrs ........................................$47,500 Diesel, Auto, A/C, 61,410 Miles $29,500

BACKHOES

DUMP TRUCK

KBM converts delinquent accounts into $$ money that you can spend! When your business needs help collecting delinquent accounts, you need Kearns, Brinen & Monaghan. At KBM, we know your valuable time is best spent building and running your business. We have the expertise and resources to collect your past-due receivables, quickly and at a reasonable price. Our reputation for providing outstanding, personalized service and positive results is the foundation of our success. And by using the most advanced technology, collection tools, and industry experts, we can play a role in your company’s success by turning your delinquent receivables into cash.

(2) Case 580M’s Available ................ 2001 Sterling, 3126 Cat-8 Speed, Star ting at $25,900 64,000 GVW ..........................$ ..........................S $39,500

2001 Cat 973 Loader

• A full service national & international commercial collection agency • Credit Bureau Reporting on all debtors • In depth knowledge and success collecting commercial accounts. • On line access to your accounts and reports in real time • Highest Return on the Dollars placed for collections. • Free pre-collect financial investigations • Use of Private Investigators in the field. • Attorney Demand Letters at no charge. • Remittance bi-weekly on the 1st & 16th • Insured, Licensed and Bonded. • Over 100 years combined commercial collection experience

CALL US TODAY FOR A FREE QUOTE 877-698-5200

Kearns, Brinen & Monaghan, Inc. PO Box 314 Camden, DE 19934-0314 Phone: (302) 736-6481 • Toll Free: (877) 698-5200 Fax: (302) 734-5269 EvPolak@KBMCollect.com

www.kbmcollect.com

6000 Hours, EROPS, A/C, GP Bucket w/Teeth, U/C 40%

$55,000 F.O.B. Royersford, PA JERRY HOLLERAN

Machinery Services, Inc. Royersford, PA (610) 733-9511 machsvcs@comcast.net

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 25

FINANCING AVAILABLE

286 Central Ave. South Kearny, New Jersey 07032

800-255-5512 Phone 973-589-4100 Fax 973-589-4811 E-mail: info@tes-inc.net Website: www.tes-inc.net

1997 USTC Taxi King 32 Ton, 74.4' Boom, 45' Jib, S/N 400003434, FOB: New Jersey - POR

2008 Elliott L60R 62' Working Height, 40" x 60" Platform, 14' Steel Bed, 2009 Sterling 240 HP, 29,000 GVW, AC FOB: NJ - POR

1961 Link-Belt HC78A 30 Ton, S/N 70H1709, 3 axle, 55' Boom, Angle Boom, FOB: New Jersey - POR

1983 Link-Belt HC258, 200-ton, 300' main boom-tubular, S/N 28H31668 FOB: New Jersey - POR

Talbert AC-20, 40,000 lb. payload capacity, 19’ Deck x 102” - Spring assisted Ramps, Self Cleaning, Air Brakes - 60” Beavertail - POR

ADDITIONAL EQUIPMENT FOR SALE 1998 USTC Taxi King FOB: NJ....................................................................POR 1961 HC-78A FOB: NJ..................................................................................POR NEW Kalmar DCD250-12LB FOB: NJ........................................................POR 1998 Kalmar DCD70-40E5 FOB: NJ............................................................POR 1974 Link-Belt HC 218 FOB: NJ ................................................................POR 2005 Shuttlelift 5560B FOB: NJ ................................................................POR 2004 Shuttlelift 3340B FOB: NJ ..................................................................POR 1999 Link-Belt LS 218H FOB: NJ................................................................POR

Authorized Dealer TRAILER

Page 26 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 27

Page 28 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

When You Buy Equipment From Cleveland Brothers,

You’re Buying More Than Just Iron!

$104,500

$42,000 2005 Cat 420D Backhoe Loader, SMU: 5500, ID# UP113356N, S/N 0FDP25512, EROPS, EStick, A/C, 5 Function Hydraulics, Std. Coupler, Std. Shift, AWD Controls, 1250# Counterweight, Ride Control, Flip Over Stabillizer Pads

$86,000

2008 Cat CS54 Compactor, SMU: 2489, ID# UP10849N, S/N 0C5R00101, ROPS/FOPS, Single Drum, Vibratory, Smooth, Susp. Seat, Flotation Tires 80%, 2315 Hrs

$76,900 2002 Cat D6M XL Track Tractor, SMU: 12653, ID# UT11221N, S/N 03WN03160, EROPS, Ether Starting Aids, 6 Cab Mtd. Lights, U/C @ 12,518 Hrs @ 90%, D6N Blade Repaired, Repaired Trans. Engine Wiring Harness & Windshield

$91,900

$65,000

$26,000

1999 Cat 963C Track Loader, SMU: 12087, ID# UP8358N, S/N 02ZN02224, Cab w/AC, Waste Handling, 3rd Valve, 4 Lights, Trash Radiator, GP Bkt, Long Tip Teeth, 20” Trek Track & Segs. 85%, Hr. Meter Broken - ECM, Cat U/C 50%, 12,041 Hrs, Cat 3116 Engine

1999 Cat IT28G Wheel Loaer, Cab w/A/C, Ride Control, Wheel Steering, Extra Ctwt, 4 Valve, 3 Lever Hydraulics, 20.5R25 Tires @ 14,037 Hrs, 40%, All Bridgestone, Forks w/Top Clamp

2004 Cat D6R LGP DS Tractor, SMU: 8342, ID# UT97848N, S/N 0ADE00464, Cat C9 Dsl. Eng, Cab w/AC, S Tilt 13’ Blade, Wired for GPS Sys Waste Handler w/Flex Air Fan, Ripper, Hyd Ctrl, Lines to Rear, Oil Change Sys., Rear Striker Bars, U/C 85% @ 7992 Hrs, 36” Track

2006 Cat 307CSB Compact Excavator, SMU: 2024, ID# ULP10499N, S/N 08NE01285, Cab, Plumbed for Hammer, 48” Bkt, 18” Rubber Track, U/C @ 1931 Hrs, 80%

$95,000

1973 Manitowoc 4600 Dragline, SMU: 1700, ID# UC11421, S/N 46284, 140’ Boom, Powered by Cat D379, Det. Light Plant, 7 Yd Esco Bkt, Incl. Spare Bkt, New Motor w/1700 Hrs

$60,000

2002 Cat D6M XL Track Tractor, SMU: 10135, ID# UT10834N, S/N 03WN03167, Cat 3116 Eng, EROPS, A/C, PAT Blade, Cwt, Fingertip Steer, U/C @ 10,108 Hrs, 22” Shoes 60%, Links 40% Bushings 50%, Not Turned, Segments 60%, Idlers 80%, Rollers 35%, Carriers 50%, Rebuilt Eng./Torque

$94,000

1996 Cat 950F II Wheel Loader, SMU: 6014, ID# UP10692N, S/N 09TK02579, EROPS, A/C, GP Bkt, Steering Wheel, 23.5x25 Tires @ 5797 Hrs, 80%

$48,000

$30,000

$325,000

2000 Cat 953C Track Type Loader, SMU: 9438, ID# UT11502N, EROPS, A/C, GP Bkt, 2-Stick Hyd. Control, 15” DG U/C @ 9453 Hrs, Needs Replaced

$173,000

$62,000

1985 Cat 824C Wheel Loader, SMU: 8043, ID# UP11574N, S/N 085X01169, EROPS, A/C, Wheel Steering, Tires @ 7947 Hrs, 29.5R25 XHA Michelin AII, RF 56%, LF 52%, RR 52%, LR 48%

1989 Cat D9N Track Type Tractor, SMU: 34792, ID# UT10737N, S/N 01JD01620, U/C @ 34,773 Hrs, 27” Shoes 60%, Links 30%, Segments 50%, Front Idlers 15% & 44%, Rear Idlers 65%, Rollers 50%

1998 Cat 345BL Hyd. Excavator, SMU: 10092, ID# UT11475N, S/N 04SS00501, Cab, A/C, 1 Pc. Boom, 48” Bkt, 11’2” Stk, Travel Pedal, Cwt. Rem. Device, U/C @ 10,052 Hrs, 36” TG Shoes 85%, Bushings 75%, Not Turned, Links 85%, Segs 75%, Idlers 55%, Rollers 65%, Carriers 70%, Repairs: Hyds. Repaired @ 9979 Hrs, Stick & Link Bore

$61,900 1999 Cat IT28G Wheel Loader, SMU: 7803, ID# UT10462N, S/N 08CR02025, Cat 3116 Eng, EROPS, Std. Front, Wheel Steering, Autoshift, CB Built 2.5 Cu. Yd. Bkt, 20.5R25 Tires @ 7541 Hrs, 70%

$52,000

1997 Cat 938F Wheel Loader, SMU: 3479, ID# UP11429N, S/N 01KM02323, EROPS, A/C, GP Bkt, Wheel Steering, Tires @ 2347 Hrs, 20.5R25 Michelins 60%, Rebuilt Trans/TC on 1/19/10, Front Fenders Repairs, Repaired Safety Items

$75,000

2004 Cat D4G XL Track Tractor, SMU: 5776, ID# UP10570N, S/N 0HYD00565, Cat 3406 Eng, EROPS, Drawbar, A/C, PAT Blade, Joystick Steer, U/C @ 5622 Hrs, 18” Shoes @ 80%, Bushings 70%, Not Turned, Links 75%, Segments 80%, Idlers 90%, Rollers 55%, Carriers 55%

2003 Cat 314CLCR Hyd. Excavator, SMU: 3254, ID# UT10271N, S/N 0PCA00169, EROPS, A/C, 36” Bkt, 8’2” Stick, Aux. Hyd, Plumbed to Stick for Hammer, Coupler Has Lines for Rear Blade, U/C @ 2939 Hrs @ 65% Remain, Not Turned

JOE GONCALVES

TOM JAMIESON

DUANE PHILLIPS

(717) 561-3312 Harrisburg, PA jgoncalves@clevelandbrothers.com

(717) 561-3305 Harrisburg, PA tjamieson@clevelandbrothers.com

(412) 877-3549 Pittsburgh, PA dphillips@clevelandbrothers.com

For More Information, Call Our Used Equipment Department:

(888) 262-3079 In Canada Call (877) 890-4900 (717) 635-7409

Find Our Complete Inventory with detailed descriptions & photos on:

www.clevelandbrothers.com

www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com

• www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com •

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 29

Page 30 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

JFK’s Bay Runway Projects Provides Up to 2,500 Jobs JFK from page 1

of JFK’s departures but to carry out the project, the runway needed to be shut down for four months. As a result, with about a third of JFK’s traffic and half its departures diverted, there had been a profound ripple effect at airports across the country. But closing the runway for four months was felt to be a better alternative than a longer project schedule that also would include two to three years’ night work. Although travel would be more difficult than usual for a time, the end result would be a runway able to accommodate larger planes and, if need be, the space shuttle, for which it serves as a secondary or emergency landing space. So Much to Do, So Little Time A very tight schedule was involved. Work on the job began on March 1, 20l0, with the shutdown of the runway and work had to be completed by the end of July. Prime contractor Tutor Perini Corporation, based in Sylmar, Calif., was awarded the $204 million contract to oversee the project on behalf of the Port Authority in July 2009. Stretching 14,572 ft. (4,441 m), the Bay Runway, one of four at JFK, is among the longest commercial runways in the country. It was widened from 150 to 200 ft. (46 to 61 m). Six in. (15 cm) of the existing asphalt runway was milled and rebuilt with 18 in. (46 cm) of concrete, while hot mix asphalt was used to rebuild the shoulders. The job also includes constructing two new taxiways, to be angled in such a way that planes can more quickly move from their terminals to takeoff points, thus improving travel times. In addition, new runway lighting and electric feeder systems for future aids to navigation will be installed. Intercounty Paving Associates of NY LLC, based in Hicksville, N.Y., worked on the job as a subcontractor. “Intercounty is responsible for the milling on the project as well as 280,000 tons of asphalt paving and fine grading of subgrade materials. Our affiliate, Flushing Asphalt, is the asphalt supplier for the job,”

said Intercounty General Manager Frank Lizza Jr. The company also was responsible for hauling 100,000 tons (80,718 t) of drainage stone and 100,000 tons of sand for the concrete operations. For paving, Intercounty used three Caterpillar 1055 pavers and a Caterpillar 655 paver, among other paving equipment. Intercounty was involved in the 120-day shutdown portion of the job, which included installing all the drainage, electrical, milling, paving and concrete work. Intercounty accomplished a notable feat in early May. “We put down over 115,000 tons to date. Most notably we installed over 8,850 tons of asphalt

JFK’s Bay Runway handles approximately half of JFK’s departures but to carry out the project, the runway needed to be shut down for four months.

(L-R): General Manager Frank Lizza Jr., Project Superintendent James Egerten and Principal John Lizza, all of Intercounty Paving Associates of NY LLC.

on Saturday, May 2 alone, a milestone for total tons delivered to JFK in one shift,” Lizza said. “We used four Caterpillar 1055 pavers to achieve this and 30 Live-bottoms. We averaged 2,000 tons per crew per day, using two crews Monday to Friday and four on Saturday. It is an enormous challenge that we are meeting every day.” Vital Choices Lizza believes the right equipment makes all the difference, from both quality of installation and reliability standpoints. “We are very meticulous in the equipment we choose … you don’t sign up for a job like this without bringing your best equipment,” he said.

While the bulk of equipment Intercounty used on the job is company-owned, it also purchased some machinery for the project. “Intercounty bought a Caterpillar AP-1055D and Caterpillar AP-655D pavers along with a M322D wheeled excavator. They also have several machines on rent to complete this job, where the time constraints they are working under make it so unique,” said Bill Grater, sales representative of Foley Inc., Piscataway, N.J. Describing Foley’s service as “wonderful,” Intercounty’s Lizza added, “Foley was given a deadline and they met it. When delivery time was getting close they supplied us with a loaner paver at no see JFK page 100

Intercounty Paving Associates of NY LLC is responsible for the milling on the project as well as 280,000 tons of asphalt paving and fine grading of subgrade materials.

On one Saturday, Intercounty paved with three Cat 1055 pavers in tandem to complete an 80 ft. (24.4 m) pass with no cold joints. On this day, the company put down more than 8,800 tons(7,983 t) of hot mix using four crews.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 31

YOUR EAST COAST RENTAL SOURCE

342 Rockingham Rd Londonderry, NH

603-623-3669

MACHINES AVAILABLE FOR EXPORT CONTACT: RANDALL SANDERSON

603-623-3669 OR 603-234-0353 Email: rsanderson@tquip.com

2001 KOMATSU WA500-3 EROPS, A/C, 29.5 RADIALS, 7CY G.P. BKT, INJECTORS, RECENT DEALER TUNE UP, 10CY LT MAT BKT AVAIL ......................$115,000

EXCAVATORS

WHEEL LOADERS 07 KOMATSU WA320-5L, EROPS, A/C, 20.5 X 25 RADIALS, 3.5CY BUCKET, Q/A W/ FORKS........................................................................$105,000 (2) 07 KOMATSU WA250-5L, EROPS, A/C, 20.5X25 MICHELIN RADIALS, 3CY G.P. BKT W/ TEETH, Q/A, FORKS, TOOL CARRIER ............................ ............................................................................Starting at $79,000 Each 07 KAWASAKI 70ZV-2, EROPS, A/C, 23.5 RADIALS, JRB Q/A, FORKS AVAILABLE ..................................................................................$109,000 06 CAT 930G, EROPS, A/C, 20.5 X 25 MICHELIN RADIALS, 3CY BKT W/EDGE, Q/A, FORKS AVAIL..........................................................$89,000 05 KOMATSU WA380-5, EROPS, A/C, 23.5 X 25 RADIALS, 4.5 CY BKT W/ EDGE, ADDITIONAL CTRWT ....................................................$99,000 05 NEW HOLLAND LW270, EROPS, A/C, 26.5 RADIALS, CUMMINS ENGINE, 5CY GP BUCKET (complete recon)..................................$69,000 05 KOMATSU WA320-5L, EROPS, A/C, 20.5 X 25 RADIALS, 3.5 CY BKT, Q/A W/HYD FORKS ........................................................................$79,000 05 KOMATSU WA250-5, EROPS, A/C , 20.5 X R25 MICHELIN XHA RUBBER, 3 CY GP BKT, JRB Q/A ..........................................................$69,000 00 CAT 924G, EROPS, A/C, 20.5 X 25 RUBBER, 2.75CY G.P. BKT, POWERSHIFT ........................................................................................$54,500

LOADER BACKHOES

DOZERS

EROPS, A/C, 23.5X25 RADIAL RUBBER, 4CY G.P. BUCKET............ ........................................$119,000

07 KOMATSU D39EX-21A, EROPS, A/C, 20” PADS, 6-WAY BLADE .......... ......................................................................................................$69,000 06 KOMATSU D155AX-5, EROPS, A/C, ST BLADE, 60% UC ......$229,000 (2) 06 KOMATSU D65EX-15, CAB, A/C, 24” PADS, SU BLADE W/ TILT, 65% UC, 2500+/- HRS......................................Starting at $129,000 Each (2) 06 CAT D3G LGP, OROPS, 28” LGP PADS, 6-WAY BLADE, RENTAL FLEET RETURN, JOB READY ..............................Starting at $29,500 Each 05 CAT D6N LGP, EROPS, A/C, 32” PADS, DIFF STEERING, DRAW BAR, 70% UC, ONE OWNER SINCE NEW ..............................................$99,000 03 CAT D5GXL, EROPS, A/C, 20” PADS, 80% UC, PAT BLADE, WORKING DAILY ............................................................................................$39,000 01 JOHN DEERE 650H, OROPS, 28” LGP PADS, 6-WAY BLADE ..$29,000 86 CAT D4H II, OROPS, 18” PADS, ST BLADE ..............................$19,000

ROLLERS 08 SAKAI SV505, 84” VIBRATORY ROLLER, OROPS, DRUM DRIVE, NEAR NEW ....................................................................................$59,000 (2) 06 SAKAI SV400T, OROPS, 66” FACTORY SMOOTH DRUM SHELL WITH PAD DRUM, ONLY 500+/- HRS ................Starting at $49,000 Each (4) 06 DYNAPAC CA250D, 84” VIBRATORY ROLLER, OROPS, DRUM DRIVE..................................................................Starting at $59,000 Each 05 DYNAPAC CA150D, 66” VIBRATORY ROLLER, OROPS, SMOOTH DRUM, W/PADFOOT KIT ................................................................$49,000 05 IR SD45D, OROPS, 54” VIBRATORY ROLLER, SMOOTH DRUM, DRUM DRIVE, LOC IN FLA ............................................................$24,500 04 IR SD45D, 54” VIBRATORY ROLLER, DRUM DRIVE, OROPS, PADFOOT KIT........................................................................................$27,500

WATER TRUCKS

(2) ‘00-’06 CASE 821 LOADERS EROPS, A/C, 23.5 RADIALS, 4.5CY BUCKET WITH ACS Q/A, FORKS AVAIL ....Starting at $75,000 Each

2007 CAT IT38G EROPS, A/C, 80% GOOD YEAR 23.5 RADIALS, Q/C, 3.5CY G.P. BUCKET ............................$95,000

Southern NH, Northern MA 603-396-5144

John Colcord

06 KOMATSU PC300LC-7, A/C, 32” PADS, STD STICK, 48” BUCKET, HYD THUMB ........................................................................................$149,000 06 CAT 315CL, 28” PADS, 10’2” STICK, 36” BUCKET, MECHANICAL THUMB ..........................................................................................$99,000 06 KOMATSU PC78US-6, CAB, A/C, BLADE, STEEL PADS, 24” BUCKET, HYD.THUMB & TILT BUCKET - ALL OPTIONS!..............................$59,000 06 KOMATSU PC50MR2, CAB, A/C, BLADE, OFFSET BOOM, RUBBER PADS, AUX HYDRULICS, WB 24” DIGGING BKT, GEITH 42” TWISTWRIST............................................................................................$69,000 (2) 05 CAT 330CL, A/C, STD STICK, 32” PADS, CAT 48” BKT, EXCELLENT CONDITION ......................................................Starting at $139,000 Each (2) 05 KOMATSU PC220LC-7, A/C, STANDARD STICK, 42” HENSLEY BKT, 60” TILT BUCKET........................................Starting at $99,000 Each 05 KOMATSU PC160LC-7, A/C, STD STICK, HYD THUMB & 36” HENSLEY BKT ........................................................................................$89,000 (2) 05 KOMATSU PC120LC-6, JRB COUPLER, JRB 48” TILT BUCKET, GEITH 36” DIGGING BUCKET ............................Starting at $79,000 Each (2) 05 CAT 420D-IT, EROPS, 4X4, EXTENDAHOEStarting at $52,500 Each (2) 05 KOMATSU WB140PS-2N, CAB, A/C, E-STICK, 24” REAR BKT ........ ..............................................................................................$49,000 Each

2006 KOMATSU WA380-5

Rhode Island & Southern MA 401-255-9340

Denny Easton

02 CAT 725, EQUIPPED WITH NEW 5000 GAL TANK, FRONT & REAR SPRAY HEADS, PWR CANNON, SIDE SPRAY..............................$149,000 99 GMC C6500, A/C, 2500 GALLON TANK, FRONT REAR & SIDE SPRAYERS, 6 SPeED TRANS ........................................................$25,000 99 GMC C7500, A/C, 2500 GALLON TANK, FRONT REAR & SIDE SPRAYERS, 6 SPEED TRANS ........................................................$29,000 99 FREIGHTLINER FL70, A/C, 2000 GALLON TANK, 5 SPRAYERS, 6-CYL. CUMMINS, 6 SPEED TRANS, 11R 22.5 RUBBER ..........................$19,000

2006 KOMATSU PC300 LC-7 A/C, 32" PADS, STD STICK, 48" BUCKET, HYD THUMB ....$139,000

SKID STEERS 07 KOMATSU CK30-1, OROPS, RUBBER TRACKS, Q/A BUCKET ..$25,000 06 CAT 226B, OROPS, 68” G.P. BUCKET, 10X16.5 RUBBER ........$16,900 06 CAT 242B, OROPS CAB, AUX. HYD. PLUMBING, VTS TRACK SYSTEM, 12” TRACKS, MANUAL COUPLER ........................................$26,000 06 KOMATSU SK1020-5N, ENCLOSED CAB W/HEAT, CTRWT, CTRL CHANGE ........................................................................................$29,000 04 BOBCAT T250, EROPS, A/C, TRACK MACHINE ........................$25,000

CRUSHERS 02 KOMATSU BR550JG-1, 44X30 TRUCK MOUNTED JAW CRUSHER, MAG SEPARATOR, MUCK CONVEYOR ASSY, RADIO REMOTE CONTROL, 300+ HP, COMPLETE UPDATES BY DLR, 60K IN RECENT REPAIRS.......... ....................................................................................................$229,000 00 NORDBERG NW3055VFR, 30X55 JAW CRUSHER, 2 AXLE CARRIER, 26” X 18” HOPPER, MAGNET, VERY LITTLE USE, 48” DISCHARGE CONVEYOR ........................................................................................$225,000 97 READ AMBASSADOR, 2 DECK SCREEN, HYD.TIPPING GRIZZLY, W/DISCHARGE BELT, LOW HOURED 1 OWNER MACHINE ..........$59,000

2005 CAT 321C LCR A/C, STD STICK, 32" PADS, ZERO TAILSWING, MANUAL THUMB, 42" CAT BKT, HYD PLUMBING..$109,000

ROCK TRUCKS (4) 07 KOMATSU HM300-2, 6X6, A/C, 23.5X25 RADIAL RUBBER, TAILGATE, BODY HEATER........................................Starting at $179,000 Each 05 CAT 725, A/C, 23.5 80% RADIALS, CLEAN & PAINTED, 1 OWNER SINCE NEW ....................................................................................$99,000 05 KOMATSU HM300-1, A/C, RETARDER, HEATED BODY, 26.5 RADIAL RUBBER ......................................................................................$119,000 (2) 05 CASE 325, 25 TON, 6X6, RADIAL RUBBER, RENTAL FLEET RETURN ..............................................................Starting at $79,000 Each 01 CAT 725, A/C, NEW 23.5 RADIAL RECAPS, CENTRAL LUBE....$69,000 01 TEREX TA35, A/C, AM/FM STERO BRIDGESTONE RADIALS, 6X6 FACTORY TAILGATES ..........................................................................$79,000 00 CAT D250E, 6x6 23.5 RADIALS, BODY LINER, 1-OWNER TRUCK ........ ......................................................................................................$49,000 (2) 97 CAT D350E, COMPLETE RECON, 80% 26.5 RADIALS, WORKING DAILY ..................................................................Starting at $69,000 Each

(2) 2002 KOMATSU HM350-1

2004 CAT 730

AC, 60% 26.5 BRIDGESTONE RADIALS, RETARDERS, COMPLETE NEW PAINT............ ................................................$119,000 Each

A/C, REATARDER, CAT 3196 ENGINE, 60% 23.5 X 25 RADIALS, NEW FACTORY TRANS, NEW BRAKES ..................................$119,000

2005 CAT 308C CR A/C, AUX.HYD.PLUMBING, 7'3" STICK, 24" PADS, 27" BUCKET, 91" BLADE, HYD.THUMB ........$59,000

2006 KOMATSU PC78US-6 CAB, A/C, BLADE, STEEL PADS, 24" BUCKET, HYD.THUMB & TILT BUCKET - ALL OPTIONS! ..$59,000

See Our Complete Inventory at www.tquip.com

Page 32 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Kenneth

Simonson

May MHC Starts Rise; ABI Falls; State Construction Employment Splits; Wages Cool More

We are a full service authorized Eager Beaver Dealer.

YOUR FULL SERVICE VIBROTECH SCREEN DEALER FOR NJ & DEL. 1989 Mack R690T

1999 Airman SDG60S

1995 Cat D6HXL Series II

Conv. Cab, Single Frame, 10' Body, 5 spd, Tarp System, Green......$14,900

Diesel Trailer Mounted, 60KW ............ ..............................................$14,900

Diesel, OROPS, 24" size steel tracks, std blade with tilt ..................$54,900

2000 John Deere 624H

2000 Komatsu WA320-3MC

IHI 28N

Diesel, EROPS, Heat, A/C, 4x4 .......... ..............................................$62,900

Diesel, EROPS, 4x4, forks, ACS hydrau coupler ......................$52,900

Diesel, OROPS, Pilot Controls, 24” Front Bkt, Front Aux Hyd, Rubber Tracks........ ................................................$13,500

2003 Bobcat S175

2004 Bobcat S-250

2002 Terex TH842C

Diesel, OROPS, 4x4, Front Aux. Hyd, Hydro Drive, Quick Coupler ....$12,900

Diesel, turbo, OROPS, 4x4, front aux hyd, hydro drive ....................$17,900

Diesel, OROPS, 4x4, block forks ........ ..............................................$19,900

DELIVERY

Various New Excavators, Grapples and Thumbs

FINANCING

MIKE ZYNDORF LLC 609-625-8660 609-641-3342 (EVENINGS) FAX 609-625-8664

6481 Harding Hwy (Rt 40) Mays Landing, NJ 08330 Please Visit us www.mzequipment.com for our complete inventory

New construction starts in May climbed 3 percent from the previous month, McGraw-Hill Construction (MHC) reported on June 22, based on data it collected. “Nonresidential building showed improvement after weak activity in April, and residential building edged upward. However, non-building construction retreated in May, following April’s elevated amount of new public works and electric utility projects. For the first five months of 2010, total construction starts on an unadjusted basis [was] down 2 percent from the same period a year ago. ‘The recent pattern of construction starts indicates that activity has stabilized at a low level, with ups-and-downs on a monthly basis, but the transition to sustained expansion has yet to occur,’ stated Robert A. Murray, vice president of economic affairs for MHC. ‘The volume of nonresidential building remains quite low, and is likely to stay that way through 2010. Much of this year’s upward movement is expected to come from public works construction, which lost momentum in May after earlier gains.’ The 2 percent decline for total construction starts on an unadjusted basis during the first five months of 2010 was the result of varied behavior by sector. Residential building climbed 30 percent, with the comparison to the early months of 2009 when the improvement for single-family housing was just beginning to take hold. Non-building construction year-to-date decreased 8 percent, with public works down 4 percent while electric utilities fell 28 percent. Nonresidential building year-to-date dropped 16 percent, due to this performance by major segment: commercial building, down 32 percent; manufacturing building, down 63 percent; and institutional building, down 4 percent.” The Architecture Billings Index (ABI), a measure of the difference between the number of architecture firms reporting increased billings less those with decreased billings compared to the month before, slipped to 45.8 in May from 48.4 in April, the American Institute of Architects said on June 23. The May reading was the 28th straight below the breakeven 50 level and broke a string of three increases. Sub-indexes by practice specialty, which are reported as threemonth moving averages, rose to 51.3 from 49.6 for commercial/industrial practices and to 46.9 from 45.7 for residential, but slipped from 47.3 to 46.8 for mixed and from 45.0 to 43.4 for institutional. ABI readings below 50 suggest there will be fewer building projects for contractors to bid on and build in future months. Seasonally adjusted non-farm payroll employment increased in May in 41 states and the District of Columbia, decreased in five states, and was unchanged in four, the Bureau of Labor Statistics (BLS) reported on June 18 (with revisions posted on June 24). But, compared to May 2009, employment decreased in 39 states and increased in 11 states plus D.C. Construction employment decreased for the month in 25 states, improved in 22 plus D.C., and was unchanged in three states. Over 12 months, construction employment increased in five states, the largest 12-month tally since December 2008: Kansas (6.2

percent, 3,600 jobs); North Dakota (5.4 percent, 1,100 jobs); Arkansas (3.0 percent, 1,500 jobs); Alaska (2.5 percent, 400 jobs); and New Hampshire (1.3 percent, 300 jobs). There were year-over-year construction job losses in 45 states plus D.C. The largest percentage losses were in Nevada (minus 23.0 percent, 18,900 jobs); Washington (minus 15.6 percent, 25,400 jobs); Missouri (minus 15.0 percent, 18,000 jobs); and Vermont (minus 14.7 percent, 2,000 jobs). (BLS combines mining and logging with construction in seven states plus DC to prevent disclosure of data about industries with few employers.) The number of mass layoff events (involving 50 or more workers from a single employer) and workers affected (as measured by new unemployment claims from those events) dropped by more than 50 percent from May 2009 to May 2010, BLS reported on June 24. The number of construction events and workers affected both dropped 38 percent. Construction union wage and benefit settlements “so far in 2010 have resulted in an average first-year increase of $0.55 or 1.1 percent…down considerably” from $1.49 or 3.1 percent in the comparable period of 2009, the Construction Research Labor Council reported on June 21. “Second- and third-year settlements also are lower, but by lesser amounts. Small or no increases were widespread. Almost a quarter of new agreements were freezes or reductions and about two-thirds were less than 2 percent…. Almost all second- and third-year increases were under 3 percent…. As has historically been the case, low average settlement level has been accompanied by shorter agreements. A majority of agreements have been for one year.” Personal income increased 0.9 percent nationally in the first quarter at a seasonally adjusted annual rate, with increases in all but two states (minus 2.0 percent in North Dakota, 0 in South Dakota), the Bureau of Economic Analysis reported on June 18. The largest percentage increases were in Mississippi, 1.6 percent; Kansas, 1.5 percent; Louisiana, Alaska, Tennessee and Hawaii, 1.4 percent each. Earnings (payrolls, supplements to wages and salaries, and proprietors’ income) rose 0.64 percent, but construction earnings fell overall and in 39 states plus D.C. Construction earnings rose in nine states and stayed level in two. Census released estimates on June 22 for population change between July 2008 and July 2009 for all cities with more than 100,000 persons. Rapidly increasing population can imply construction opportunities but may also result from annexing adjoining land. The largest percentage increases were in Frisco, Texas, 6.2 percent; Cary, North Carolina, 5.7 percent; McKinney, Tex., 5.5 percent; New Orleans, 5.4 percent; and Alexandria, Virginia, 3.8 percent. The largest numerical increases were in New York City, 45,087 (0.5 percent); Los Angeles, 30,294 (0.8 percent); San Antonio, 24,394 (1.8 percent); Phoenix 23,775 (1.5 percent); and Fort Worth, 23,276 (3.3 percent). © Kenneth D. Simonson is chief economist of the Associated General Contractors of America.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 33

Page 34 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ELLIOTT & FRANTZ, INC.

10421 Guilford Road Jessup, MD 20794 301/725-7394 Fax: 301/725-7361

1457 Oak Ridge Place Hagerstown, MD 21740 301/733-8100 Fax: 301/739-1835

38420 Sussex Highway Delmar, DE 19940 302/846-3033 Fax: 302/846-0763

9469 Hawkins Drive Mannassas, VA 20109 703/393-4014 Fax: 703/393-4010

450 E. Church Road King of Prussia, PA 19406 610/279-5200 Fax: 610/279-6366

Case Presents 250,000th Skid Steer to A. Folino Construction

Case Wichita plant employees celebrate the 250,000th Case skid steer with customer Dino Folino (C, standing behind poster), vice president of A. Folino Construction, Oakmont, Pa.

Case Construction Equipment recently celebrated production of its 250,000th skid steer loader. A special ceremony was held at the company’s global skid steer manufacturing facility in Wichita, Kan. Case presented the 250,000th skid steer to its new owner, Dino Folino of A. Folino Construction, a paving contractor from Oakmont, Pa. The milestone unit — a Case 430 Series 3 model — is Folino’s fourth Case skid steer in a fleet of Case Construction Equipment celebrated manufacturing its 250,000th skid steer equipment that includes a total of nine Case loader on June 17, 2010. During a ceremony at the company’s plant in Wichita, Kan., machines. Case began producing skid steers in 1969 Case officials presented the machine – a Case 430 Series 3 model – to its new owner, Dino Folino, of A. Folino Construction, Oakmont, Pa. with the 1530 Uni-Loader model, and has

been innovating ever since with Case-exclusive features like ride control and side lighting. Last year, the company marked its 40th anniversary of manufacturing skid steers with Case Rockin’ Block Parties [especially themed dealer open houses] at Case dealerships across North America. “In 2000, we manufactured our 100,000th skid steer. Then, just 10 years later, we more than doubled our sales,” said Curtis Goettel, skid steer marketing manager. “Today’s achievement testifies that customers around the world prefer Case skid steers. With more than 75 attachments available, you’ll find see CASE page 120

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 35

We Proudly Represent the Full Line of Terex Cranes and are Able to Offer You the LARGEST INVENTORY IN THE COUNTRY!!! New and Used Call us today for your best pricing!! Terex APR - New England Territory - NY, MA, RI, CT, ME, VT, NJ, NH

Fully Staffed Parts Department to Service All of Your Requirements.

SALES • SERVICE • PARTS Authorized Terex® Distributor

SYRACUSE, NY 315-458-4101

BOSTON, MA 508-868-7734

NEW JERSEY / NYC 315-663-4043

www.empirecrane.com sales@empirecrane.com domestic.craneparts@empirecrane.com international.craneparts@empirecrane.com

www.terex-cranes.com

Page 36 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

1-800-872-2390 www.traceyroad.com SYRACUSE 800-872-2390

ALBANY 800-692-9669

BINGHAMTON 800-370-9488

ROCHESTER 866-950-6210

WATERTOWN 888-335-0200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 37

TO VIEW OUR ENTIRE INVENTORY VISIT www.equipmentmartofny.com 2004 Cat 321C LCR Hydraulic Excavator

2000 Blaw-Knox MC330 Shuttle Buggy

9'6" stick, 32" tracks, aux. hyd, Cat hyd. coupler, A.C. Approx. 2600 Hrs $98,500

2001 Cat 320CL Hydraulic Excavator

Cummins Diesel, 16.00x24 Tires, Paver Hopper, 2594 Hrs $98,500

(2) 1995 Cat D300D 30 Ton Articulated End Dumps

Auxiliary Hydraulics, Quick Coupler $65,000

(2) 2003 Cat M318C Wheeled Excavators

23x25 Tires, Approx. 8500 Hrs $36,000 Ea.

2003 Cat 330CL Hydraulic Excavator

12’10” Stick, 34” Tracks, Hyd. Q/C, 6700 Hrs $79,500

aux. hyd., VA boom, A/C, $65,000 EA.

2001 Cat 322CL Hydraulic Excavator, 9’8” Stick, 32” Tracks, Aux. Hyd., Quick Coupler, Approx. 7300 Hrs, $68,500 • 2001 Manitowoc 2892C 28 Ton Tr. Mtd. Crane, 92’ Boom + 44’ Jib Mtd. on 2001 Ford Sterling LT7500 Truck, Cat Dsl, 9-Spd, Trans., Front Stabilizer, $85,000

203/335-0100

EQUIPMENT WANTED Fax: 203/335-7996

Answering Machine 24 Hours E-mail us at equipmart@aol.com

Page 38 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

DEPENDABLE DOZERS 2005 N.H. DC95 Crawler Dozer w/ Wide Track, Cab, 1447 Hrs ....$59,900 2006 N.H. D75 Crawler Dozer w/ Wide Track, Cab, 1159 Hrs ......$54,875 2006 N.H. D95 Crawler Dozer w/ Wide Track, Cab, 1001 Hrs ......$80,875 BACKHOES 2005 N.H. LB75.B TLB, 4wd, Cab, Heat/AC, Extendahoe, 758 Hrs $32,000 2004 N.H. LB75.B TLB, 4wd, Cab, Heat/AC, Extendahoe, Pilot, 1845 Hrs .. ........................................................................................................$33,500 New Holland Construction Equipment is built tough to handle the most demanding jobsite conditions. Rugged construction, reliable engines, less downtime and service is a snap. See us today for a demonstration.

EXCAVATORS 2009 N.H. E215B Excavator w/ Cab, 1362 Hrs............................$125,875 2007 N.H. 160 Excavator w/ Cab, Hyd. Thumb, 30” Bucket, 1140 Hrs ...... ......................................................................................................$105,000 2009 N.H. E135B SR Excavator w/ Cab, Dozer Blade, 596 Hrs ..$155,000 2006 N.H. E70 SR Excavator w/ Cab, Blade, Rubber Track & Hyd. Thumb, 1067 Hrs ........................................................................................$64,000 2007 N.H. E70SR Excavator w/ Cab, Blade, Steel Track, 383 Hrs $87,250 2000 Cat 312BL Excavator w/ Cab, Wain Roy Coupler, 36" Bkt, Thumb, 3878 Hrs ........................................................................................$43,500 MISC. EQUIPMENT 2005 Manitou 634-120LSU Telehandler, 34’ Reach ......................$33,895 2008 N.H. W50TC Mini Tool Carrier, 385 Hrs ..............................$44,500 2006 N.H. LW110.B Tool Carrier, 1331 Hrs ..................................$66,250

SKID STEER 2004 N.H. LS150 Skidsteer, OROPS, 6100 Hrs, Good Cond ..........$8,995 2006 N.H. LT185.B Track Skidsteer ..............................................$34,000 2007 N.H. C185 Track Skidsteer, Cab, Heat/AC, Pilot, 84” Bkt, 630 Hrs .... ........................................................................................................$37,625 Gehl 4635SX Skidsteer, OROPS, 4995 Hrs......................................$7,995 1996 Bobcat 763 Skidsteer, Cab/Heat, Hi Flow Hyd., 68” Bucket, 1373 Hrs ........................................................................................................$10,750 WHEEL LOADERS 2006 N.H. W130 Wheel Loader, 401 Hrs ....................................$109,000 2005 N.H. LW170.B Wheel Loader, 2418 Hrs ..............................$69,995 2007 N.H. W130 Wheel Loader, 2 Available ..............Starting @ $79,995 2007 N.H. W170B Wheel Loader, 1014 Hrs ..................................$86,250 ATTACHMENTS VARIETY OF BUCKETS ..................................................STARTING @ $295 2006 FFC 60" Skid Steer Snow blower w/electric swivel, Like New .......... ..........................................................................................................$3,000 2007 Pro-Tech 14L 14' Snow Pusher ..............................................$3,995 1997 Pro-Tech Hyd. Fold Snow Pusher, 16' w/ Rubber Edge..........$5,995

C A P I TA L T R A C T O R I N C . 1135 State Rt. 29, Greenwich, NY 12834 518/692-9611 FAX 518/692-2210

Since 1966

978 Albany-Shaker Rd., Latham, NY 12110 518/785-3377 FAX 518/783-5362

www.capitaltractorinc.com

GEORGE & SWEDE SALES & SERVICE INC.

(585) 584-3425 Fax: (585) 584-8853 Pavilion, New York

Your Wheel Loader Specialists www.georgeandswede.com Email: sales@georgeandswede.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 39

RANSOME CAT LOCATIONS CAN NOW SERVICE YOUR COMMERCIAL AND TRUCK ENGINES TOO!

Albert Medcalf Office: (502) 456-4050 Cell: (502) 592-6510

Martin McCutcheon Office: (614) 824-9162

ent Construction Equipm ... Guide Special Pricing G! Say You Saw it in CE

www.ruddequipment.com

Whitehall Allentown Fleetwood

P E N N SY LVA N I A Bensalem N E W West Chester

JERSEY

Hammonton

TRUCK SALE!

Bear

2004 A40D, s/n 11095, 8540 Hrs $250,000

2004 A40D, s/n 11128, 9490 Hrs $250,000

2000 A40, s/n 60536, 8660 Hrs $140,000

1996 A35C, s/n 4373, 15,435 Hrs $75,000

1998 A40, s/n 60198, 12,460 Hrs $110,000

2004 A40D, s/n 11465, 8620 Hrs $250,000

2002 A40D, s/n 60221, 7935 Hrs $200,000

2001 A40D, s/n 60056, 11,535 Hrs $175,000

1-800-753-4CAT www.ransome.com

Page 40 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

East Pine Bush Equipment Hosts Open House in Newington, Conn. 4th of July Kickoff Sizzling Summer Used Equipment Sale 2001 Case 550H Dozer, #R46931, 2000 Hrs ............................................$29,500 2000 Case 650H Dozer, #R47045, 3994 Hrs ............................................$32,500 2004 Case 650K Dozer, #R47123, 2797 Hrs ............................................$49,500 1999 Case 850G Dozer, #R47044, 7344 Hrs ............................................$25,000 2005 Case CX160 w/Thumb Excavator, #R47138, 2537 Hrs ....................$82,500 2006 Case CX135SR Excavator, #R45860, 1476 Hrs, Refurbished ..........$82,000 1999 Case 586G (2 Wh.) Forklift, #R47091, 1356 Hrs, Refurbished ........$29,500 2002 Case 580SM 4x4 Loader/Backhoe, #R47046, 6043 Hrs ..................$29,500 2003 Deere 410G Loader/Backhoe, #R47098, 5293 Hrs, Refurbished ....$46,600 1997 Case 580SL Loader Backhoe, #R47038, 6750 Hrs, Refurbished ....$28,500 1997 Bomag BW212D-2 Roller, #R47146, 3254 Hrs, Refurbished ..........$39,500 2003 Terex SKL-873 Wheel Loader, #R46898, 6517 Hrs, Refurbished ....$46,500 1967 Trojan 134-A Wheel Loader, #R46960 ..............................................$4,500 1995 Volvo L70B Wheel Loader, #R47039, 12,100 Hrs, to be Refurbished .......... ..................................................................................................................$39,900

n Saturday, May 22 East PBE held an open house at its facility in Newington, Conn. The event included equipment displays and demonstrations from manufacturers, including Kubota, Komatsu, Esco, Mauldin, Boxer, Indeco, Bomag and Gehl. Attendees were treated to refreshments and a hog roast, along with door prizes and giveaways throughout the day. (Editor’s note: This coverage originally appeared in the New England state supplement.) see OPEN page 44

Discussing the use of Topcon grading equipment are (L-R) Steve Plamondon, Eric Long and Richard Farrell, all of Buntz Positioning; and Dan Caruso of East PBE.

Contact Bill Vinsko 800-633-0027 Ext. 202

www.medicoind.com

The East PBE facility in Newington, Conn., offers a wide variety of new and used equipment for sale and rent.

Art Goulart (L), Goulart & Son Excavation, Bozrah, Conn., checks out the Dropstatt SM514 trommel screen with Charlie Patienaude, East PBE.

for a

Tough Job

The equipment demonstration area gave people a feel for what to expect from their new equipment once it leaves the showroom floor.

C Series

B Series

• 95 - 110 hp • 12169-15212 Breakout Force • 7.5 Bucket Cap.

• 60 - 80 hp • 4312 - 7670 Breakout Force • 2200 - 2900 Load lbs.

Paul Lachapelle, Paul’s Trucking and Excavating, registers for the door prizes. Handling the registration are Holly Bodnar (R) and Donna Boniface (C).

“ Like Being Next Door ”

www.messicks.com

800-222-3373 7481 Lincoln Highway East

187 Merts Drive

(Rte. 283 Rheems Exit)

Elizabethtown, PA 17022

(Rte. 30)

Abbottstown, PA 17301

East PBE offers Indeco hydraulic breakers. Checking one out are (L-R) Mark Duhime, Manafort Brothers, Plainview, Conn.; Marty Tubbs, Manafort Brothers; John McDonald, East PBE; Dan Tubbs, Manafort Brothers; Anthony Lafata, Lafata Construction; and Jim Bacchiochi, Indeco.

Tom (L) and Steve Boniface of East PBE report that Kubota sales have been very strong with the Pine Bush group selling nearly a machine a day.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 41

John Deere • Yanmar • Sakai • Bomag Light • Mustang • Hyundai Eager Beaver • CAM Superline • Interstate • Trail King The Hyundai –9 Loaders and Excavators Are Arriving...Call Jim and Dick for Details! DOZERS - CRAWLER

COMPACTION EQUIPMENT - SMOOTH DRUM

1997 Cat D3C LGP, #1102255, 3490 hrs, OROPS, 6-way blade, new U/C w/25" pads ........$25,000 1988 JD 450G, #1402286, 7200 hrs, OROPS, 6-way blade, Direct Drive, excellent U/C ......$25,500 1989 JD 450G, #1402224, 6748 hours, OROPS, 6-way blade, Direct Drive ..........................$22,700

2007 Bomag BMP 851, #9904240, 33.5 trench compactor, 160 hours, radio remote, Hatz $25,800 2004 Bomag BW211D-3, #CON2, 1866 hours, vib-soil, 84” drum drive, Deutz diesel ..............SOLD 2000 Sakai SW800, #9902783, 1900 hours, 67” vib-asphalt, 4000 vpm............................$40,000

EXCAVATORS - CRAWLER 2006 JD 444J

1978 JD 444, #1002355, Unknown hrs, OROPS, 1.5 CY, 15.5-25 ........................................$13,500 2006 JD 444J, #1410346, 550 hrs, EROPS, 2.5 CY QC GP bkt, 3rd spool, 17.5R25 ..............$81,000 2003 Hyundai HL740XTD-3, #CON10, 1502 Hrs, EROPS, 2 CY, 20.5-25 L3........................$44,500

EXCAVATORS - MINI (UP TO 12,000 LBS)

SKID STEER - MULTI TERRAIN LOADERS

2005 Hyundai R28-7, #HE203, 205 hrs, 6,060#, cab, rub-track, blade, 15" GP bkt ............$27,000 2006 Mustang ME3503, #SS02345, 200 hrs, 7715#, cab, rub-track, blade........................$29,700

2009 Bradco SPV-48, #2002346, two pin 48” forks for Skid Steer, Used ..................................$465 2002 Thomas Protough 2200, #9902326, OROPS, 2200# capacity, GP bkt ......................$11,600 2003 Mustang 2044, #SS02275, 1350 hours, EROPS, 1450# capacity, GP bucket ..............$15,500 2005 Mustang MTL20, #SS267, 375 hrs, EROPS, 9,500# oper-weight, GP bucket ..............$35,500 2006 Mustang MTL20, #SS02357, 1025 hrs, EROPS, 9,500# oper-weight, GP bucket ........$32,500 1996 Mustang (Sweepster) MS60P, #9902354, 60” single pin hopper broom (like new) ..$1,650 2007 IR 68”, #M818, hyd-angle broom for Skid Steer (New)..................................................$4,120 2005 Grouser 8’, #M758, 6-Way Blade for Skid Steer (New)..................................................$4,133

LOADER BACKHOES 1994 JD 310D, # 1402245, 4650 hrs, 4WD, EROPS, GP bkt, E-hoe, 24" B-hoe bkt ....................SOLD 1994 JD 310D, # 1402256, 4100 hrs, 2WD, EROPS, GP bkt, E-hoe, 24" B-hoe bkt ..............$18,500 1999 JD 410E, #1402278, 7500 hrs, 4WD, EROPS, GP bkt E-hoe, 24" bkt............................$28,500 2005 JD 410G, #1402350, 5875 hrs, 4WD, EROPS, 4/1, E-hoe, 24” B-hoe bkt ..................$39,700 1989 JD 710C, #1401925, 6000 hrs, 4WD, EROPS, GP, Std-hoe, 30" bkt, HMR lines ..................SOLD

2004 Hyundai R140LC-7

WHEEL LOADERS

2007 Hyundai R140LCD-7, #HE235, 700 hrs, 30,400#, 9'10" stick, blade ........................$57,000 2004 Hyundai R140LC-7, #HE02322, 1480 hrs, 30,400#, 9'10" stick, thumb....................$49,000 1999 Hyundai R250LC-3, #CON3, 2847 hrs, 53,600#, 10' stick, thumb ............................$49,900 2006 JD 80C, #1410341, 350 hrs, 15,905#, 6'11" stick, thumb, blade ................................$78,500

Jim Maillet 973-390-7392

G&H SERVICE, INC.

Dick Clark 973-390-7390

SERVICING YOUR EQUIPMENT NEEDS SINCE 1946

Route 206 North, 121 Water St. • Newton, NJ 07860 • Phone 973-383-3370 • Fax 973-383-5756

800-545-1278 • Website: ghserviceonline.com

WHY BLAST WHEN YOU CAN TRENCH THROUGH Serving Southern NY Long Island NJ and PA

SOLID ROCK?

North Atlantic

RENTALS

800.624.0623 Vermeer North Atlantic offers a full line of specialized Trenching , Boring, Chipping and Cutting Equipment. Call our rental specialist to discuss your next job and discover that Vermeer equipment can help you beat your job!

Concrete Cutters

Directional Drills

Vacs

Screens

Grinders

Chippers

Daily, Weekly, Monthly Rates and Purchase Options Available

Trenchers

Stump Cutters

Page 42 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Berry Fund Provides Miracles for Those in Greatest Need Berry, 153 Years Old and Still Building, Has a Charitable Arm That Is Almost as Strong as Its Dynamic Worker Force tered through a port in the other arm.” The procedure was expected to take two days at Dana-Farber’s Kraft Blood Center, but things went so smoothly, Jozokos completed it on the first day. During six and a half hours, he circulated 18 liters, or the equivalent of 38 pints of blood. “It wasn’t painful, but a bit uncomfortable, because you had to keep your left arm immobile the entire time,” said Jozokos. “Also, for several days before the procedure, I got dull headaches and experienced pain, which was caused by the Neupogen injections. You needed two injections a day for four days prior to the procedure. The first day wasn’t so bad, but it got worse on the second and third days. The drug gives you chemically induced fatigue, so even if you take a nap, you wake up and feel exhausted.”

By Jay Adams CEG CORRESPONDENT

Patience. Commitment. Planting a seed in 2003 that bore fruit in 2010 and saved a life. That is the solid working foundation of Berry, a division of Suffolk Construction (formerly William A. Berry & Son Inc.) and its Berry Fund. The Berry Fund started simply as a bake sale years ago. Some $1.5 million later, and at least one life — if not more — saved, the Berry Fund — the charitable arm of one of New England’s oldest and most prestigious contractors — is so much more than the dollars donated to individuals, families and charities. The Fund is about support and hope. And in one case, it was literally about saving a little girl. In April 2010, Tim Jozokos, husband of Berry project executive Sharon Jozokos, received a phone call that represented the closing chapter of an odds-defying story that began with the Berry Fund seven years ago. The call came from a 12-year-old girl from Moorestown, N.J., who got a second shot at life, thanks to a bone marrow donation Jozokos had made. This story has its roots in a bone marrow blood drive co-sponsored by the Berry Fund in 2003 for a long-time Berry employee whose battle with large cell lymphoma was the impetus for the search for a bone marrow donor. Unfortunately, the employee passed away in 2004, but the Berry Fund donor drive still had a positive outcome in a very big way. Rare Possibility “The probability of finding a non-family match is pretty rare,” said Jozokos. “That you’d be matched with a perfect stranger is even more of a long shot.” At the time of the blood drive, Tim had opted to have the results sent to the national bone marrow registry. Five years passed, and in December 2008, Jozokos got a call saying he was a match for a patient with leukemia. Would he be willing to take the next step and come into DanaFarber Cancer Institute in Boston for some tests? He agreed without hesitation. The tests included detailed medical screening and several blood drawings for secondary typing. Lab personnel told him at that time there was a one in 12 chance that he would be an exact match. A few weeks later, that improbability became a certainty. Jozokos was a perfect match for the patient.

Tim Jozokos, husband of Berry project executive Sharon Jozokos, and their sons attended the “Fall Festival,” an annual fund-raising event for the Berry Fund. Tom’s bone-marrow donation through the Berry Fund saved the life of a 12-year-old girl.

Patient privacy rules allowed him only to know that the patient was a young girl. Donors and recipients are required to remain anonymous for at least one year. Further Screening Jozokos returned a few weeks later for further tests, including an EKG, chest X-ray and more blood draws before going into work. It was Inauguration Day, 2009, and while he watched the festivities on TV, lab workers drew 15 more vials of blood.

“Basically, there are two ways to donate marrow, which they want for blood stem cells. The old-fashioned way was to inject a large-gauge needle into a hipbone and suck the marrow out. It’s a surgical procedure,” he said. “The newer way is to get a series of injections of Neupogen, which boosts production of stem cells. The excess bone marrow gets pushed into the peripheral blood flow, which they then capture using aphaeresis to extract the marrow-rich blood from one arm and return the blood that’s been fil-

Closing the Loop A year went by, and blood bank officials informed Jozokos that the recipient wanted to make contact. He signed the necessary forms agreeing to be contacted. Several weeks later, the patient and her mother called, thanking Jozokos for his invaluable gift. “They were very thankful and asked me details about the process,” he said. “She is just graduating from 8th grade and will be heading to high school in the fall. They promised to e-mail some pictures and stay in touch.” Jozokos is happy to have made a difference in a young girl’s life. “It feels good,” he acknowledged. “Being a parent, if you’re ever in that place, you’d like to think someone would be there for you. I know when we were going through this process; we’d try to explain what was happening to our little guys, who were then four and six. Their eyes would get big, especially about the injections. I’m not sure they understood entirely, but I think they got the point that something special was going on.” And it was. Holiday Bake Sale The Berry Fund started in 1994 as a holiday bake sale organized by employees. It netted $700. Over the years, it grew in number. As word spread, and more and more requests were made, the Fund continued to grow to meet these needs. In 2009, the Fund surpassed $1.5 million raised since 1994. Throughout the years, the Berry family has been steadfast in its commitment to help people whose lives have been touched by tragedy or a crisis that threatens their wellsee BERRY page 46

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 43

Contact: Tel: Fax: Email:

Walt Kay 540/309-1709 540/389-6507 walter.kay@RSCrental.com

RSC Equipment Rental BOOM LIFTS

SCISSORS

1999 GENIE Z45/25-DF-4WD, ART BOOM LIFT-45-49'-4WD, S/N Z452511256, UNIT #286953..................................$15,731 2004 JLG E300AJP-NAR, ART BOOM LIFT-30-34'-2WD DC, S/N 0300079224, UNIT #517940 ........................................$17,345 1999 JLG 600S-DF-4WD, STR BOOM LIFT-60-64’-4WD, S/N 0300046931, UNIT#307604..........................................$19,934 2005 JLG E400AN-NAR, ART BOOM LIFT-40-44'-2WD DC, S/N 0300081644, UNIT #541391 ........................................$23,916 2002 TEREX TB85-D-4WD, STR BOOM LIFT-85-89'-4WD, S/N 2660012, UNIT #7602108 ............................................$24,580 2002 GENIE S85-DF-4WD, STR BOOM LIFT-85-89'-4WD, S/N S853354, UNIT #439174 ..............................................$36,063

2004 GENIE GS1930, SCISSOR LIFT-15-19' DC, S/N GS300464946, UNIT #506376........................................$4,162 2005 JLG 2032E2, SCISSOR LIFT-20' DC-30-34", S/N 0200138716, UNIT #580396 ..........................................$5,168 2005 GENIE GS2032, SCISSOR LIFT-20' DC-30-34", S/N GS320576098, UNIT #581686 ................................$5,252 2005 GENIE GS2646, SCISSOR LIFT-25-26' DC-46-68", S/N GS460563998, UNIT #564334........................................$6,187 2004 SKYJACK SJIII-3226, SCISSOR LIFT-26' DC-30-32", S/N 272214, UNIT #515905 ..................................................$6,291 2005 SKYJACK SJIII-4632, SCISSOR LIFT-30-34' DC-46-69", S/N 711485, UNIT #541377............................................$8,830

FORKLIFTS

AIR COMPRESSORS

2005 BOBCAT S220, SKIDSTEER LOADER-1851-2200 LB, S/N 526215460, UNIT #590851 ........ ...................................... $17,362

2005 DAEWOO G25E, IND FORKLIFT-5000 LB, S/N GA00539, UNIT #563670 ..............................................................$10,575 2004 DAEWOO D35S, IND FORKLIFT-8000-9000 LB, S/N FZ00026, UNIT #513074 ..............................................$19,064 2004 GEHL RS5, RCH FORKLIFT-6000 LB 20-34', S/N RS5JV1211568, UNIT #539392....................................$20,075 2003 JLG G9-43A, RCH FORKLIFT-9,000 LB 35-45', S/N 0160002173, UNIT #473963..................................$20,811 2004 GEHL RS6, RCH FORKLIFT-6000 LB 35-39',S/N RS6JV0813119, UNIT #528082....................................$23,195 2004 LULL 644E-42, RCH FORKLIFT-6000 LB 40-45', S/N 0160003168, UNIT #484162 ........................................$25,811 2004 GRADALL 534D9-45, RCH FORKLIFT-9000 LB 35-45', S/N 0160003937, UNIT #499455 ........................................$31,413 2005 GEHL DL8L-42-CAB-HTR, RCH FORKLIFT-8000 LB 3545', S/N 8L42JW0135516, UNIT# 541583 ..................$37,072 2004 SKYTRAK 10054, RCH FORKLIFT-10000 LB 40-55, S/N 0160004344, UNIT #508084 ........................................$41,884

2005 ATLAS COPCO XAS97JD, AIR COMPRESSOR-DSL-80185 CFM, S/N USA013343, UNIT#577996......................$5,765 2005 ATLAS COPCO XAS186, AIR COMPRESSOR-DSL-250375 CFM, S/N USA013977, UNIT#589291....................$11,176

C O M PA C T I O N 2005 MULTIQUIP MRH800GS, ROLLER-SMOOTH-DD-1500# 26”, S/N N4034, UNIT #588093......................................$6,172 2005 WACKER RT820, W/B ROLLER-PADFOOT-3000#, S/N 5599982, UNIT #585071 ................................................$7,528 2005 WACKER RT82-SC, W/B ROLLER-PADFOOT-3000#, S/N 5549433, UNIT #548636..................................................$7,699 2005 IR SD45D-COMBO, R/O ROLLER-VIB-SD 5T 54”, S/N 182289, UNIT #555319 ................................................$23,229

540/309-1709

2004 DEERE 550H-LT CRAWLER DOZER, 75-84HP-STD TRACK, S/N T0550HX937358, UNIT #512419 ........................$31,843

2005 WACKER RT82-SC, W/B ROLLER-PADFOOT-3000, S/N 5593138, UNIT #581593............ ........................................$7,699

2004 DEERE 310G D/L-CABBACKHOE-4WD 18-20’ EXT/CAB, S/N T0310GX941817, UNIT #531900........................$34,334

2004 JLG G9-43A, RCH FORKLIFT-9000 LB 35-45', S/N 0160003850, UNIT #505796 ...... ......................................$29,626

Aberdeen, MD Baltimore, MD Frederick, MD Greenwood, DE Upper Marlboro, MD

Folcomer.com

(800) 737-0049 (800) 218-9462 (800) 951-2550 (800) 756-9433 (800) CASE-580

T r u c k s zC r u s h e r s zD u m p zS e m i zF a r m zE q u i p m e n t zC o m m e r c i a l F o r k l i f t s zD i g g e r s zD i r t M o v e r s zD o z e r s zT r a c t o r s zT r a i l e r s zS k i d d e r s L o a d e r s zB a c k h o e s zO f f - H i g h w a y zY e l l o w S t e e l zR o a d T r a c t o r s

Heavy equipment you need at a fraction of the price.

FolcomerEquipment.com

Now on Facebook! Become a fan! ‘07 Case 321E, 450 hours……… …………………………….…..$48,500

‘06 Case 850K, cab and A/C, 320 hours…………….…..$74,500

Stock #321008

Stock #850K21

Lightly-damaged and consigned heavy-duty trucks and industrial equipment enter our nationwide auctions every week. Get online, register and receive email alerts when what you’re looking for shows up. It’s simple and cheaper than buying new.

MORE DEALS! ‘08 Case 420CT Compact Track Loader, 10 hrs…....$28,500 Stock #42CT06

First With Online Salvage

‘06 Case 440CT Compact Track Loader, 250 hrs.….$23,500 Stock #44CT03

‘05 Case 430 Skid Steer, cab and heat, 364 hrs…...$20,500 Stock #UC1387

‘07 Case CX27B, 115 hours…… …………..…………………….$22,500 Stock #CX2705

‘08 Case 445 Skid Steer, cab and A/C, 205 hrs..…...$29,500 Stock #445029

Buy Now! These deals won’t last long!

814.827.0300 SalvageDirect.com Salvage Direct, Inc.

42336 Gilbert Drive

Titusville, PA 16354

Enter to win a free Charlotte Motor Speedway vacation on WhySalvageDirect.com

Page 44 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

East PBE Puts Equipment Line on Display During Event OPEN from page 40

Kathy Sweden, East PBE, spends a little time bouncing Brody Mitchell on her knee. Brody’s Grandpa, Kurt, is one of the factory certified Parts Technicians on staff at East PBE.

Equipment demonstrations included this hydraulic rotary screen attachment, which is being manufactured in Connecticut and is offered for sale through East PBE.

Kris Binder of Hydrema demonstrates the unique flexibility of the model 912HM 11-ton articulated side-dump truck.

Jean Boniface presents door prizes to Tim and T.J. Wheeler of Wheeler Construction, Canton, Conn.

A picture perfect day is topped off with a barbecued pork feast.

Attendance was very strong at this year’s open house and several machines were sold the day of the event.

This Komatsu 51PX dozer is equipped with Topcon grading technology and was available for hands-on demonstrations.

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ July 7, 2010 â&#x20AC;˘ Page 45

Blue Chip Investment <Zi i]Z bVm^bjb gZijgc dc ndjg ^ckZhibZci lî] V EZiZghdc )(%% 9gjb 8]êeZg Lî] i]Z XVeVWâîn id egdYjXZ V Âś & hôZY X]ê! i]Z )(%% XVc bZZi ndjg W^dbVhh cZZYh fj^Xàn VcY Z[Ă&#x192;X^Zcian Vi V adlZg Xdhi eZg idc >cXgZVhZ ndjg eVnWVX` lî] dei^dcVa hô^c\ \gViZh i]Vi ZmeVcY ndjg bVg`Zi dei^dch# ?jhi dcZ add` Vi V EZiZghdc )(%% XVc h]dl ndj l]n lZ WjâY i]Z bdhi ^ccdkVi^kZ W^dbVhh egdXZhh^c\ bVX]^cZh ^c i]Z bVg`Zi# ;dg cZVgan i]^gin nZVgh! EZiZghdcÂťh ViiZci^dc id YZiVâ VcY dWhZhh^dc lî] XgZVi^c\ i]Z ]^\]Zhi fjVaîn! ]^\]Zhi kdajbZ egdYjX^c\ bVX]^cZh bV`Zh i]Z )(%% Ygjb X]êeZg V hjgZ ^ckZhibZci# LVci id hZZ l]Vi V EZiZghdc )(%% XVc Yd4 8dciVXi dcZ d[ djg YZVaZgh a^hiZY WZadl dg k^hî jh Vi lll#eZiZghdcXdge#Xdb# AZi EZiZghdc egdkZ id ndj l]n i]Z WZhi eVgi d[ i]Z igZZ ^h i]Z X]ê

CRANE E RENTALS Serving g the e Greaterr Hudson n Valley,, NY Y area a with

HYDRAULIC C TRUCK K & ALL L TERRAIN N CRANES

35 5 To o 275 5 Ton n Capacity VERY Y COMPETITIVE OPEN N SHOP P RATES KINGSTON,, NY

845-336-4100

6aWVc IgVXidg

7Vggn :fj^ebZci

8aZkZaVcY 7gdi]Zgh

8dkZg^c\ BVgnaVcY 9ZaVlVgZ

8dkZg^c\ CZl :c\aVcY :VhiZgc CN

8dkZg^c\ EZcchnakVc^V LZhi K^g\^c^V

)&% +-+",,,,

*%- .)."%%%*

-&) '(,"*&(' Zmi# *&%&

-%%"'+."+*'% Â&#x2122; lll#eZiZghdcXdge#Xdb Â&#x2122; ED 7DM )%).% Â&#x2122; :j\ZcZ! DG .,)%)

Page 46 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Fund’s Bone Marrow Drive Yields Rare Perfect Match nation’s most respected institutions. Berry’s meticulous attention to detail has earned the construction management firm an outstanding reputation for quality. In 2009, Suffolk Construction acquired Berry. The Suffolk/Berry partnership unites two recognized industry leaders with shared strengths and a commitment to quality and client service. Over the past 25 years, Berry has expanded from a budding local builder into one of New England’s largest construction management firms. It currently employs about 229 people. For more information visit www.berry.com. (Editor’s note: This article originally appeared in the New England state supplement.) CEG

BERRY from page 42

being or that of their loved ones. The company remains committed to this goal today. In many ways, the Berry Fund gives more than money. It gives hope. Reaching out to help others has been the commitment of the Berry Fund since employees of Berry established it. “Throughout the years, the Fund has sought out those individuals who may have fallen through the cracks or have no other place to turn to for help,” said Carolyn Miller, Berry executive vice president of sales and marketing. “All of our work is done with input from our employees and managers, who keep their ears to the ground in the communities we serve,” she added. “Over the years, the Berry Fund has earned a reputation for paying attention to individuals whose well-being is in jeopardy.” A few examples of the Fund’s work include: • Provided financial support to an individual with esophageal cancer during chemotherapy treatment, and provided residents of a local shelter for abused women much-needed grooming products and professional clothing for job interviews. • Each holiday season, children under the care of the Massachusetts Department of Children and Families receive ageappropriate gifts individually selected and wrapped by Berry employees. In 2009, the number of children receiving gifts from the Berry Fund doubled to 100 from 50 the previous year. • While working on a construction project at Smith College, Berry learned that the nearby Northampton Survival Center was in dire need of additional storage space to meet growing community needs. The Berry Fund donated materials, and through a coordinated effort with subcontractors, refurbished a former parking facility into essential food storage space to accommodate the Center’s 3,500-plus annual visitors. “The Berry Fund also helps organizations that have an exemplary record of assisting individuals in need,” added Miller. “From the Dana-Farber Cancer Institute and Floating Hospital for Children in Boston to smaller, lesser known

Referred to as the “Hospital of the Future,” the new clinical building at Baystate Medical Center, Springfield, Mass., will allow for the expansion of medical/surgical and intensive care beds as well as inpatient heart and vascular and surgical areas. The project is following the Green Guide for Health Care.

but equally deserving nonprofits like the Plummer Home for Boys (Salem, Mass.) and the Strongest Link (Danvers, Mass.), the Berry Fund has helped a wide variety of non-profits fulfill their missions of community service.” Working Since 1857 Berry, a division of Suffolk Construction, was established in 1857 in Danvers, Mass., and is one of the nation’s oldest and most respected construction firms. Berry began when company founder and namesake William A. Berry, a member of a prominent local family, started building churches, schools and stately homes throughout Boston’s North Shore. During the 1900s, the company prospered by specializing in highend carpentry and millwork. The last member of the Berry family to own the company was “Max” Berry. A West Point graduate, Max created an unusual niche for the family business — moving historical homes. From the 1940s until the early 1980s, Berry dismantled houses in New Hampshire and Vermont, and rebuilt them in South Natick, Martha’s Vineyard and Nantucket.

In 1983, Max Berry sold the company to John Kavanagh, a senior project manager at the George Macomber Company. Kavanagh’s first employee was present-day Berry President Peter Campot. The two had worked together for years and brought complementary skills and personalities to the relationship as well as strong mutual respect. The pair had major projects from the outset. The first was the renovation of two research labs at Boston’s Brigham and Women’s Hospital, a client Berry still works with today. The building boom of the 1980s triggered accelerated growth, and the company grew by 500 percent. By the early 1990s, further expansion was fueled by surges in institutional markets of hospitals, colleges and research facilities. By 2000, Berry had 200 employees and a Liberty Mutual Gold Award of Exceptional Safety Performance. In 2007, John Kavanagh sold the company to Peter Campot who continues the tradition of quality, integrity and hard work. With a focus on health care, life sciences and education markets, Berry’s clients span many of the

At 1 million sq. ft., the Center for Life Science/Boston is the city’s largest research center. The 18-story building has six levels of below-grade parking. This LEED Gold certified building was constructed using the up/down construction method. Berry also simultaneously completed four tenant fit-outs in the building during core and shell construction.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 47

e rv ic

ic e s s e rvi ce s erv s e ss rv

What goes around comes around. The best measure of a crane company is how they stand behind their promises ... to their customers, their suppliers, and their manufacturers. At ALL, we stand behind every piece of equipment with timely support, service, and parts. We continually invest in our people, our ﬂeet of equipment, and training. And with branches throughout North America, we’re there when you need us. Because that’s what you expect from a leader.

We have a yard nearby. Call 800-232-4100 or go to:

www.allcrane.com/Locations.aspx © ALL Erection & Crane Rental Corp., an Equal Opportunity Employer

DRIVE YOURSELF TO THE EDGE WITH REESE WETLAND CROSSING MATS

Case 580SM, Backhoe, #10242, 1100 Hrs, cab, extendahoe, 4 WD, Huskie HH1000 breaker ..........................$55,900

2007 Case SV212 Roller, #10877, 350 Hrs ..............................................$65,900

EQUIPMENT LISTING Case 445CT, #10361, 380 Hrs, ROPS, 84" Bkt, Rubber Track..............$28,500 Case 1845C Uniloader, #11393, ROPS Canopy, New Tires ................$10,500 Yanmar SV08 Mini Excavator, #10128, 160 Hrs., folding ROPS, 8" bkt ..$9,900 2005 Yanmar VIO40 Excavator, #10190, 921 Hrs, Cab w/AC, Thumb $25,900

Vernon E. Stup Co. MAIN OFFICE: 5859 Urbana Pike Frederick, MD 21701

P.O. Box 3236 Winchester, VA 22604

301/663-3185

540/662-8266

800/822-0160

www.vernonestupco.com

• • • • •

Installations Rentals Sales Reduce access road construction costs by up to 75% Build to the water’s edge

K.W. Reese, Inc. • Box 298 Mercersburg, PA 17236 (717) 328-5211 • Fax: (717) 328-9541 www.kwreese.com

Page 48 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GET YOUR PARTS AND GET BACK TO WORK

2007 Komatsu CD60R-1

Ransome Cat offers a convenient option for ordering earthmoving and industrial engine parts on-line. It’s FREE, and all you need to do is register today at www.ransome.com. No Traffic. No Phones. No Lines. No Waiting. - Review part schematics and part numbers through Cat’s Service Information System (SIS-Web) - Check real time parts availability - Review pricing - Examine remanufactured parts options - Select shipping options and delivery location - Save time

Approximately 900 Hrs, Like New, $119,500

PLEASE CALL DOUG MEHNER OR DAVID MEHRTENS (913) 371-3822 PREMIUM QUALITY USED EQUIPMENT NEW Doosan DX140 Excavator, 36” Bkt ..................................................$89,500 NEW Doosan DX180 Excavator, 42” Bkt ................................................$102,000 2006 Doosan Solar 140LC-V 9’10” Arm, Blade - 36” Bkt, 1950 Hrs ......$69,900 2006 Doosan Solar 140LC-V 9’10” Arm - 36” Bkt, 850 Hrs ....................$55,900 2006 Daewoo Solar 225LC, V Excavator, Rental Return, 48” Bkt, Hyd. Thumb, 49,000 lbs, 765 Hrs..................................................................................$89,900 2005 Daewoo Solar 75 17,000 Lbs, 1000 Hrs, New Tracks, Blade/Thumb .......... ................................................................................................................$39,900 1991 Case IH 595 Tractor/Loader, 2WD, ROPS/Canopy ............................$9,900 1991 Ford 445 Tractor/Loader, Cab, 4200 Hrs ..........................................$4,995 2003 Komatsu D41E-6 Advance Boss, 1285 Hrs, OROPS, Pat Blade, Hydro. Drive, Like New! ......................................................................................$53,000 2002 Dresser TD9HLGP 24” Pads, 3000 Hrs ..........................................$29,900 2004 Terex TX760B T/L/B, Cab, 4WD, Extend-a-hoe, 2800 Hrs ..............$22,500 New Terex TX760B T/L/B, Cab, 4WD, Extend-a-hoe..............Starting at $49,900 Daewoo Mega 200V Loader, 2 1/2 Cu. Yd. Bkt, 25,000 Lbs, 137 HP, 17.5-25 Radials, Rental Return, 955 Hrs ..............................................................$69,900 7’ Sweepster Dual Motor, Drive Broom, Mtg. Kit for JD 5400/5410/5420 Series Tractor, Like New, Replacement Cost: $9,000 ..............Buy This One For $5,995 1985 MF 290 Tractor, 2WD, ROPS, Canopy, 6500 Hrs, Equipped w/Alamo, Industrial (1999); Left/Right/Rear Flail Mowing System, 19’ Cut Width ..$15,900 2008 JD PR84B (Harley) Power Rake, 7’ Width, Power Angle, Skid Steer Mount, (Like New) ..................................................................................................$6,995 1971 Bush Hog Heavy Duty 15’ Batwing Mower, Good Condition............$4,500 1971 Case 970 Ag Tractor, 2WD, Cab, 90 PTO HP, New Rubber, Low Hrs $7,500 COMPACT CORNER 1991 Jacobsen D4220 Front Mower, 72” Deck, 2 Stage Snowblower ......$1,995 JD 670 T/L, 4WD, 60” Mid Deck ................................................................$6,995 8’ York 3 Pt. Hitch Broom, Like New ..........................................................$2,500 1981 Ford 555 T/L/B, 2WD, Cab, 2720 Hrs, Clean/Tight Machine ..........$10,995 2006 Terex HR37 Mini Excavator, 1050 Hrs, Enclosed Cab, Zero Tak Swing, 24” Quick Hitch Bucket ..................................................................................$24,900

DOOSAN • Loaders/Excavators TEREX • Loader/Backhoes Available For SALE/LEASE/RENT OR RENTAL PURCHASE NEW 2010 DOOSAN EXCAVATORS - DX 140/DX 180

SALES • SERVICE • PARTS • RENTALS Rt. 9, Livingston, NY (10 Mi. S. of Hudson) (518) 537-6221 Fax: (518) 537-5276

31 North Broadway Red Hook, NY (845) 758-8888 Fax: (845) 758-8887

Get the latest news online.

Visit CEG’s Web Site at www.construction equipmentguide.com

It’s as easy as.....Point, Click, Parts. www.ransome.com 1-877-RANSOME

N.Y.’s Tracey Road Equipment Adds Delaney, Muhleman to Its Sales Staff Jerry Tracey, president of Tracey Road Equipment, announced two additions to his sales staff. Tim Delaney brings to Tracey Road Equipment’s customers 20 years of experience in the construction equipment industry, representing names such as Caterpillar, Kobelco and Ritchie Bros. Auctioneers. Delaney will be representing all lines represented by Tracey Road Equipment in Onondaga, Cortland and Monroe counties. Steve Muhleman joined Tracey Road Equipment in January of this year. Muhleman has more than 10 years of experience in equipment sales for the construction, demolition, paving, and scrap recycling market. Tracey Road Equipment, with locations in Albany, Syracuse, Rochester, Watertown and Binghamton, N.Y., is central New York’s exclusive dealer for New Holland, Kobelco, Sakai, Takeuchi, Terex, Kawasaki, Stanley, LaBounty, Hyundai, Sennebogen, Dressta, Moxy, Interstate, Rogers, Western Star, Freightliner, Sterling and Oshkosh. For more information, call 315/437-1471 or visit www.traceyroad.com.

(L-R) are Jerry Tracey, president of Tracey Road Equipment; Steve Muhleman, Western N.Y. sales representative of Tracey Road Equipment; and Tim Delaney, Tracey Road Equipment sales representative of Onondaga, Cortland and Monroe counties.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 49

J.F. Kiely Construction Promotes Safety Using College Interns J.F. Kiely Construction Co. is promoting safety awareness with the help of college interns seeking valuable job experience. During the busiest season of the year J.F. Kiely Construction Co. hires summer interns to assist its safety department in job site audits and toolbox talks. “We have created a win-win situation here at J.F. Kiely Construction Co.,” said its president, John Kiely. “Our work crews receive the benefit of extra safety reminders and college interns gain valuable job experience before careers in construction.” The health and safety department is comprised of three full-time professionals, multiple outside consultants and summer interns. “Safety is a top priority at J.F. Kiely

Construction Co. and we are constantly thinking of and implementing new ways to communicate the importance of safety to both our union members and management,” said Andy Thomson, director of Health and Safety. J.F. Kiely Construction Co. offers utility customers a diversified list of services including the installation of gas, water, electric and sewer. Founded in 1952, J.F. Kiely Construction Co. employs more than 200 professionals throughout New Jersey. Its specialties include directional drilling, highpressure tapping, pipe welding and plastic fusion. For more information, visit www.JFKIELY.com.

What’s going on in your company? We want to know! Give us a call.

Construction Equipment Guide

800/523-2200 or FAX 215/885-2910

ELLIOTT & FRANTZ, INC. KING OF PRUSSIA, PA

JESSUP, MD

450 E. Church Road, King of Prussia, PA 19406

10421 Guilford Road, Jessup, MD 20794

610/279-5200

410/792-9134 from Washington D.C. 301/725-7394

HARRISBURG, PA 6680 Allentown Blvd., Harrisburg, PA 17112

717/652-5430

HAGERSTOWN, MD 105 Oakridge Place Hagerstown, MD 21740

301/733-8100 DELMAR, DE Rt. 13, P.O. Box 368 Delmar, DE 19940

302/846-3033

Page 50 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

PROVEN POWER FOR LESS MONEY... Rental tractors from Hoober

Hoober offers extremely affordable rental and lease purchases on Tractors and Scrapers, backed by excellent Hoober service.

For more details and quotes call Charlie Hoober or Larry Herr.

800-732-0017 or 717-768-8231

Brooklyn Bridge to Receive $500M Makeover; Job to Take Four Years By Sara Kugler Frazier ASSOCIATED PRESS WRITER

NEW YORK (AP) The Brooklyn Bridge has been through a lot in its 127 years, and now the New York icon needs a facelift. The famous 1.1-mi. suspension bridge is getting a $500 million makeover, a project that includes a complete repainting and the repair of elements that were part of its original construction. Vice President Joe Biden joined Mayor Michael Bloomberg June 2 to mark the beginning of the rehab, which is set to be completed in four years. The federal economic recovery act provided $30 million for the effort; the rest of the funding comes from the city and other federal sources. Standing in front of an access ramp where huge swaths of peeling paint exposed patches of rusted steel, Biden said the makeover was a “badly needed” upgrade for the beloved bridge. “This bridge is an emblem of what this great country represents,” he said. The bridge, with its two neo-Gothic towers and elegant steel cables, is one of New York City’s most revered pieces of architecture. Designed by engineer John Augustus Roebling, it

opened May 24, 1883, after 13 years of building at a cost of $15 million. The East River span — the subject of several books, a Ken Burns documentary and countless songs — helped spur the growth of the city’s outer boroughs. It also has played an important role in major events throughout city history, including on Sept. 11, 2001, when a flood of people fled lower Manhattan by walking across the bridge. The structure has been spruced up many times over the years, but not recently. “It is the first major work on the bridge in 10 years,” Bloomberg said. The landmark, traversed by 120,000 cars and thousands of pedestrians and cyclists each day, was last painted in 1991. The repainting is expected to take the entire four years. The existing coat must first be blasted off. To minimize air quality issues, the blasting and repainting will be done in enclosed units that travel along the structure, above traffic, and equipment placed on barges anchored to the bridge above. The new coat will be in the same sandy-colored hue seen on the bridge now, a shade approved by the city Landmarks Preservation Commission

and called “Brooklyn Bridge tan.” The other major update will be to the roadways that approach the bridge in Manhattan and Brooklyn. Ramps will be expanded from one to two lanes. The city said slabs of pavement will be installed in segments, and the steel decks on the approach ramps also will be removed in sections and replaced panel by panel with precast concretefilled steel, to reduce noise from drilling and jackhammers. Rusted railings in some areas of the approach ramps — some that were part of the original bridge construction — will be refurbished and reinstalled. The bridge facelift is one of six infrastructure projects in New York City that received stimulus funding. According to the mayor’s office, most of the Brooklyn Bridge work will be done at night, requiring some lane closures of the bridge’s Manhattanbound lanes. On some weekends, all lanes to Manhattan will be closed. Brooklyn-bound lanes will remain open during night work and on weekends. Motorists heading to Manhattan can use alternate routes. The walkway for pedestrians and bicycles will remain open during the project.

Expanding Reach…

KIOTI Tractor Adds U.S. Dealerships

CRANE MATS NORTHEAST, LLC Hudson Falls, NY 518.792.4708 www.cranematsnortheast.com

KIOTI Tractor Division of Daedong-USA Inc. has added seven new dealerships across the United States. These dealers are: • Haltom Equipment Inc. in Mooresville, Ind. — 317831-4985. • Hollinger’s Sport & Turf in Ephrata, Pa. — 717-8595455. • Lamb & Webster Inc. in Grove City, Pa. — 724-2644403. • Miller Tractor & Equipment Inc. in Anderson, Calif. — 530-378-1116. • Pardo’s Truck Service Parts Whse. in Sewell, N.J. — 856-227-2330. • Pete’s Equipment Sales & Service in Morrisville, Vt. — 802-888-5138. • Rusty Palmer Inc. in Honesdale, Pa. — 877-253-6323. According to KIOTI Business Development Account Specialist Ann Marie Donahue, “These dealers were select-

ed for these locations because of their outstanding record of customer service and applications assistance and their prompt attention to their end-user customers’ service and parts needs.” The new appointments take effect at once. All of these new dealers will be handling both the KIOTI tractor and UTV product lines along with their respective implements and attachments. KIOTI currently offers more than 30 different tractor models in the 22 to 90 hp range. In addition, the dealers also will be marketing KIOTI’s soon-to-be-announced line of MECHRON UTV’s — The Ultimate Transport Vehicle. These dealers’ sales, service and parts staffs have been fully trained in the application, sale and service of the entire KIOTI line and are now offering all current KIOTI finance and incentive programs. For more information, call 877/GO-KIOTI or visit www.KIOTI.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 51

ZZZ UHPX ¿

Call to Arrange a Demo.

Portable Tracked Conveyor

RM100 Compact Recycler Crushes Concrete, Asphalt, Brick, Block and All Rock Products.

• • • • •

Screen for Less Non-Clogging Self Cleaning Rotors Screens Wet Materials Finished Material from 3/8” - 2 3/4” Minus Special Applications for Composting and Mulching • 18 Different Models for Skid Steers, Backhoes, Excavators and Wheel Loaders

• High Production Rates • Crush to a 3/4” Minus with Closed Circuit Option • John Deere Powered

• 62,000 Pounds • Transports in 1 Load • Dust Supression

Extremely Low Operating Cost Recycle & Reuse Materials Onsite

• Quick & Easy Set-Up • Competitively Priced • Reduced Operating Costs (Fuel & Labor) • Great Operating Efficiency • Natural Stockpile Capacity Increased

• No Contamination of Product • Easy to Move Around Job-Site • Tracked & Wheeled Models Available • Full Electric & Hydraulic Models Available

Serving the Entire Northeast 203-569-0339 COR-EQUIP.COM Follow us on: facebook.com/corequipmentsales • twitter.com/corequipsales • youtube.com/corequip A Division of Cavaliere Industries

3D-MC

Twice the speed & accuracy of any 3D system. You can GRADE AT FULL SPEED, and still achieve even FINER RESULTS than ever before - in a SINGLE FINISH PASS. Get FINISH QUALITY from your dozer and MAKE MORE MONEY by REDUCING the TIME and ENERGY it takes to get

‘It can take a full blade without being taken off grade. The benefit is being able to put it down in one pass and move on.’

to grade. Topcon’s 3D-MC2 takes your operation to a whole new level.

Get there first!

Inertial sensor technology,

Matthew Rich Brantford Engineering

combined with GPS, accurately controls the dozer’s blade at a speed of 100 times a second! Visit our site to view testimonials of real people using 3D-MC2.

It’s time. topconpositioning.com/3dmc2

Page 52 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

RETOOL YOUR THINKING Register now for CONEXPO-CON/AGG 2011, the most information-packed show in construction. Get close and size up the newest equipment, technologies and strategies for profitability. See how construction has gotten greener, safer and more efficient since you last walked the warm pavement of Vegas. Be there to take it all in—so you can take it all back with you.

MARCH 22-26 LAS VEGAS USA

Go to www.retoolandwin.com for details on how to register and full sweepstakes rules.

RETOOL AND WIN Get entered automati cally for a $250 PREPAID CARD simply by completing your regist ration. Two winners will be dra wn every week from July 12, 2010, thr ough March 14, 2011. You could be on e of them!

CONEXPO-CON/AGG 2011 is co-located with:

SWEEPSTAKES TERMS AND CONDITIONS NO PURCHASE NECESSARY. Must be a professional in the construction industry and legal U.S. or D.C. resident 21 or older. To enter: Complete your registration at: www.retoolandwin.com. Sweepstakes starts July 12, 2010, and ends March 14, 2011. Void where prohibited. Odds of winning depend on the number of eligible entries received. Official Rules and alternate method of entry details at www.retoolandwin.com. Sponsor: Association of Equipment Manufacturers, Milwaukee, WI.

Paving

SECTION N.Y.’s Tri-State Paving Smoothes the Way With LeeBoy Tri-State Paving, a site excavation, paving, concrete and demolition company in Deer Park, N.Y., needed a paver. After an extensive demo process, it selected a LeeBoy 8816B. “A number of things really impressed us about the LeeBoy,” said Carl Girolamo, co-owner, along with his brothers Alex and Chris, of Tri-State. “The paver is fully automated, computerized, and everything is completely accessible. The machine is amazingly user-friendly. All of the technology and all of the features that you would expect on a full-sized highway paver are in this LeeBoy machine,” When Girolamo purchased his LeeBoy 8816B with a heated electric screed, it was one of the first models of this machine off the assembly line. It is an 8 to 15-ft. (2.4 to 4.5 m) paver that extends to 18 ft. (5.5 m) and is equipped with a Topcon grading system. “All Island Equipment is our local LeeBoy dealer. Once Gary Wade, the owner of All Island Equipment, and his brother Daryl, the service manager, convinced me that they were well equipped to properly support the LeeBoy equipment, purchasing the 8816B became our obvious choice. “I’m a tough sell. It took Gary Wade 10 years to sell me a piece of equipment. We have no regrets at all,” Girolamo added. Quality, Versatility “We are very impressed with the LeeBoy paver. It is definitely giving us a better finished mat than any other paver we have previously used. The screed has very consistent heat, which results in a more consistent product,” Girolamo said. “For its size, the paver is very strong. Our first project was on

Staten Island and we were amazed at how well it would push a truck up a steep hill. “The size of the machine gives us great versatility. We can go from paving a road to a parking lot without switching machines. We [also] were very impressed with the turning radius of the LeeBoy. That certainly helped with the flexibility of the paver.” To date, Tri-State Paving has had no service issues whatsoever with its new paver and has been pleased with All Island Equipment’s support. “When we have needed technical support from All Island Equipment, they have been right there and did an excellent job in training our people in the use of the machine,” Girolamo said. Gary Wade (L), president of All Island Equipment and Carl Girolamo, president of Tri-State Paving pose with Tri-State’s custom painted LeeBoy paver.

Carl Girolamo, president of Tri-State Paving, gives the LeeBoy paver a try.

About Tri-State Paving The Girolamo brothers founded Tri-State Paving 10 years ago. The company gets its name from the area it serves: metropolitan New York, Connecticut and Long Island. It has a fleet of machines in excess of 50 pieces and serves all types of customers, including commercial, municipal, New York City Housing Authority and New York City Parks Department. Tri-State Paving also does a lot of work for chain retailers such as Walgreens. Other than the construction of the building, it handles the entire job, including excavating, installing the utilities, paving, curbing, street lighting, landscaping and painting the lines in the parking lot. For more information, visit www.allislandequipment.com or www.tri-statepaving.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Page 54 • July 7, 2010 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Terex CR552 Paver Provides More Power, Production The paver is available in both traditional slat conveyor (CR552) and Remix auger delivery system (CR552RX) configurations.

The largest rubber tire asphalt paver in the Terex Roadbuilding line, the Terex CR552 mainline paver delivers more power and production capacities for fullwidth paving applications such as airports, interstates and state highways, industrial paving projects and major county road and highway construction. The paver’s heavy-duty frame and bogie pivot, kingpin and bogie bearings offer a hopper load bearing capacity of up to 25 tons (22.7 t), delivering the extra surge capacity necessary to handle mainline paving. The CR552’s 260-hp (194 kW) Cummins diesel engine meets stringent Tier III, C.A.R.B. Tier III and Stage IIIA emissions standards, while offering the power to efficiently handle full-width paving and ample reserve to operate electric screeds and lights for night paving. The 6-cylinder, 24valve engine varies the fuel stream to use only the amount of fuel nec-

essary for the application, resulting in greater fuel economy and quieter operation, according to the manufacturer. The CR552 paver provides up to a 50 percent greater footprint than other pavers for improved traction. Its heavy-duty rear drive motor offers increased draw-bar pull for increased tractive effort. Contractors can further improve draw-bar pull by up to 50 percent over normal two-wheel drive systems by equipping the paver with the front wheel drive assist option. “With the CR552, contractors get the low cost and higher speeds of a rubber tire paver without sacrificing traction,” said Bill Rieken, paver applications specialist of Terex Roadbuilding. The paver is available in both traditional slat conveyor (CR552) and Remix auger delivery system (CR552RX) configurations. The Remix Anti-Segregation System features two sets of two counter-

rotating augers in the hopper to aggressively reblend material. The augers uniformly draw down material from all areas of the hopper to reduce occurrences of both material and thermal segregation. This leads to a more homogeneous texture and consistent temperatures across the mat, allowing rollers to readily achieve final spec densities, according to the manufacturer. The cooling system keeps the CR552 running cooler and the engine compartment cleaner for optimum reliability. The singlewidth, triple-element radiator efficiently cools engine water, charge air and hydraulic oil, while the hydraulically driven, variablespeed cooling fan turns only as fast as necessary to improve fuel economy and reduce noise levels. Cooling air is drawn from above the hood rather than ground level for cleaner air quality and exists primarily through the front grill,

resulting in a pressurized engine compartment that reduces debris infiltration. Unlike pavers with transverse mounted engines, the CR552’s air flow and engine mounting is less likely to affect sonic grade control systems with waves of hot air. The Terex CR552 paver features the frame raise and three-point suspension systems. The frame raise system raises and lowers the rear of the paver, which allows the operator to fine-tune the head of material at the spreading augers, reducing segregation. By isolating the frame from the drive system, three-point suspension essentially “floats” the pavers over subbase irregularities, maintaining consistent material feed height at the screed. A proportional steering system is available for the CR552 rubber tire paver. This system enhances maneuverability by holding a tighter turning radius and is essen-

tial when paving with material transfer devices. Applied in three stages — low, medium and high — the system is controlled by a toggle switch on the operator’s console. As the steering wheel is turned when the toggle switch is at medium setting, the proportional steering system gradually decreases the signal to the inside drive wheel and increases the signal to the outside tire. This helps maneuverability by allowing the paver to better hold the line, whether paving straight or in cul-de-sacs. Contractors can equip the CR552 paver with three different screed models — the diesel Fastach 10, electric VersaScreed 210 and the electric or diesel Stretch 20. Depending on screed model, this 10-ft. (3 m) paver delivers mainline paving widths reaching 30 ft. (9.1 m) at depths up to 12 in. (30.5 cm). For more information, visit www.terex.com.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 7, 2010 • Page 55

Folcomer Equipment Corp. P O Box 340 629 S. Philadelphia Blvd. Aberdeen, MD 21001 800-737-0049 Fax: 410-575-7052 6300 Crain Highway Upper Marlboro, MD 20772 800-227-3580 Fax 301-627-9764 1561 Tilco Drive Frederick, MD 21704 800-951-2550 Fax 301-682-6075 2300 Eskow Avenue Baltimore, MD 21227 800-218-9462 Fax 410-247-7723 12420 Sussex Highway P O Box 338 Greenwood, DE 19950 800-756-9433 Fax 302-349-5785 Tracey Road Equipment 6803 Manlius Center Road PO Box 489 East Syracuse, NY 13057 315-437-1471 1523 Route 11 North Binghamton, NY 13795 607-775-5010 Fax: 607-775-5104 300 Middle Road Rochester, NY 14467 585-334-5120 Fax: 585-334-5127 19598 Cady Road (Exit 44 - Watertown Center - off I-81) Watertown, NY 13606 315-788-0200 Fax: 315-788-3006

EXACTCOMPACT HELPS SPEED COMPACTION BY MONITORING IMPACT SPACING Take

high-frequency Sakai roller and you can speed compaction. With EXACTCOMPACT, you can be sure that you’re rolling at the precise impact spacing. EXACTCOMPACT is a simple visual monitor: Red = You’re rolling too fast. Yellow = You’re rolling too slow. Green = You’re right on target to reach density at the fastest possible ground speed. EXACTCOMPACT is standard on mainline Sakai rollers – optional on all others. Put it to work on your next HMA job.

G & H SERVICES, INC. 121B Water Street Newton, NJ 07860 800/545-1278 Fax: 973/383-5756

www.sakaiamerica.com 1-800-323-0535

Schmidt Equipment, Inc. 80 Southbridge Rd. North Oxford, MA 01537 508/987-8786

10 Republic Rd. North Billerica, MA 01862 978/667-4345

1620 Page Blvd. Springfield, MA 01104 413/543-5595

88 Camelot Drive Plymouth, MA 02360 508/830-9997

115 Railroad Ave. Ext. PO Box 5306 Albany, NY 12205-0306 518-438-1100 Fax: 518-438-4430

2397 Gar Highway (Rt. 6 & 136) North Swansea, MA 02777 508/379-9810

Highway Equipment Company 22035 Perry Highway Zelienople, PA 16063 724/452-7800 Fax: 724/452-7030 McKean, PA 814/476-7755 Dubois, PA 814/371-3600

Page 56 • July 7, 2010 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

WHEN RACING AGAINST TIME – OUR CUSTOMERS RELY ON THE WIRTGEN GROUP

The challenge: bridge rehabilitation in Pittsburgh, PA over the weekend to avoid total gridlock. The solution: fast and cost-effective rehabilitation methods using Wirtgen Group technologies. That’s what Wirtgen Group customers can rely on. www.wirtgenamerica.com

ROAD TECHNOLOGIES

ELLIOTT & FRANTZ, INC 10421 Guilford Road Jessup, MD 20794 301/725-7394 Fax: 301/725-7361 1457 Oak Ridge Place Hagerstown, MD 21740 301/733-8100 Fax: 301/739-1835 38420 Sussex Highway Delmar, DE 19940 302/846-3033 Fax: 302/846-0763

MONROE TRACTOR

1001 Lehigh Station Road 9469 Hawkins Drive Henrietta, NY 14467 Mannassas, VA 20109 585/334-3867 703/393-4014 Fax: 585/334-0001 Fax: 703/393-4010 5035 Genesee Street 450 E. Church Road Buffalo, NY 14225 King of Prussia, PA 19406 716/681-7100 610/279-5200 Toll Free: 800/834-9606 7300 Eastman Road N. Syracuse, NY 13212 315/452-0000 Toll Free:800/287-5286

110 Old Ithica Road Elmira, NY 14845 607/739-8741 6936 State Rte. 434 Binghamton, NY 13732 607/754-6570

EDWARD EHRBAR, INC.

BINDER MACHINERY CO.

4 Executive Plaza Yonkers, NY 10701 914/738-5100 Long Island 601 Coates Ave. Holbrook, NY 11741 631/563-7600 New York City 718/626-3331 42 Kenosia Avenue Danbury, CT 06810 203/743-0088 Fax 203/743-0266

2820 Hamilton Blvd. South Plainfield, NJ 07080 908/561-9000 Fax 908/561-2844 South Jersey Facility – Winslow Twp. 201 North Route 73 Winslow Township, NJ 08095 856/767-5900

THE W.I. CLARK CO. 30 Barnes Industrial Park Rd. Wallingford, CT 06801 203/265-6781 Fax 203/284-1064 15 Station Road Brookfield, CT 06804 203/775-1203 275 Route 32 Plainfield, CT 06374 860/546-4808

WOOD’S CRW CORP OF NH 1401 Hooksett Road Hooksett, NH 03106 603/644-8787 603/644-8747 www.woodscrwnh.com

GROFF TRACTOR & EQUIPMENT, INC. 6779 Carlisle Pike 1010 Pittsburgh Road Mechanicsburg, PA 17050 Valencia, PA 16059 877/33-GROFF 800/33-GROFF 800/33-(47633) 877/33-(47633) 20 Stouffer Lane 963 South Center Avenue Ephrata, PA 17522 New Stanton, PA 15672 888/66-GROFF 888/82-GROFF 888/82-(47633) 888/66-(47633) 210 Rolling Ridge Drive Bellefonte, PA 16823 888/47-GROFF 888/47-(47633)

CENTRAL EQUIPMENT COMPANY 45 Dempsey-Greaves Lane Stillwater, ME 04489 800/479-6193 Fax: 207/827-3774

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 7, 2010 • Page 57

Chadwick-BaRoss, Inc.

George Associates, Inc.

Highway Equipment & Supply Co.

Bangor, ME (207)942-4838 Caribou, ME (207)498-2547 Westbrook, ME (207)854-8411 Concord, NH (603)224-4063 www.chadwickbaross.com

2340 Montgomery Street Silver Spring, MD 20910 (301)589-9490

Harrisburg, PA (717)564-3031 Drums, PA (570)788-1127 Ephrata, PA (717) 859-3132 Lockhaven, PA (570) 769-1070

Penn Jersey Lionville Branch 120 Gordon Rd. Lionville, PA 19341 (610)363-9200

Deptford Branch 1330 Hurfville Rd. Deptford, NJ 08096 (856)227-6400

Somerville Branch 61 County Line Rd. Somerville, NJ 08876 (908)218-1919

Staten Island Branch 331 Edward Curry Ave. Staten Island, NY 10314 (718)889-0105

Tyler Equipment Corporation

Vantage Equipment

E. Longmeadow, MA (413)525-6351 Berlin, CT (860)356-0840 www.tylerequipment.com

Latham, NY (518)220-9500 Batavia, NY (585)344-1931 Syracuse, NY (315)437-2611

Page 58 • July 7, 2010 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

1-800-223-1202 I WWW.ASPHALTCARE.COM 2765 Galloway Road • Bensalem, PA 19020 WE SUPPLY PARTS FOR IR/BLAW KNOX, DYNAPAC, MARATHON, MAULDIN, YANMAR, NEAL, CIMLINE, TOWMASTER AND MANY OTHERS

$61,000

$26,500

2006 DYNAPAC CA250 SOIL COMPACTOR 205 hours, operating weight 23,815 lbs, 84” drum, Cummins 110 hp.

BULK T OA TACK C CK IN STO

2009 MARATHON KERA 145 HP MELTER 145 oil jacketed kettle, auto temperature control, pump & wand, agitation, many extras!!

$23,500

$12,500

1996 NEAL DM5500 PATH PAVER 5’-8’ screed, Kubota diesel, auto auger/conveyor feed, steel track.

JOHN DEERE 770 TRACTOR WITH GEOTEXTILE FABRIC DISPENSER Diesel tractor, attachment can hold 12’ or 15’ rolls of fabric, trailer included.

ADDITIONAL EQUIPMENT MARATHON DIRECT FIRE AND OIL JACKETED KETTLES, Many gallon sizes to choose from, propane or diesel fired, skid mount or trailer units. P.O.R.

2008 MAULDIN 550E ASPHALT PAVER, 160 hours, Kubota diesel, 8’-13’ screed, steel track, auto auger feed. $33,000

2008 DYNAPAC CC142 ROLLER, 415 hours, operating weight 8600 lbs, 51” drum, dual vibratory, Deutz 45 hp. $34,900

The Worldwide Leader in Concrete Paving Technology

800-831-2320 R www.gomaco.com CONCRETE STREETS AND HIGHWAYS R AIRPORT RUNWAYS R CURB AND GUTTER R SIDEWALKS RECREATIONAL TRAILS R SAFETY BARRIER R BRIDGE PARAPET R BRIDGE DECKS R IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA

CLEVELAND BROTHERS EQUIPMENT COMPANY Murrysville, PA

Lantz Corners, (Kane), PA

Erie, PA

Cranberry Twp., PA

724/327-1300

814/778-5250

814/898-3388

724/776-1400

Altoona, (Duncansville), PA

Clearfield, PA

814/696-0201

814/765-1611

Somerset, PA

Clarksburg, WV

814/445-7915

304/842-2222

Construction Equipment Guide â&#x20AC;˘ Paving Section â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ July 7, 2010 â&#x20AC;˘ Page 59

Top models for great performance We all enjoy a great performance. Dynapac is proud to present several top performers in its new line of pneumatic tired rollers: the CP224, CP224W and CP274. Dynapacâ&#x20AC;&#x2122;s pneumatic tired rollers are designed WR HQKDQFH HIÂżFLHQF\ VHUYLFHDELOLW\ RSHUDWRU safety and comfort. Exceptional features include a smooth start-stop system when changing GULYLQJ GLUHFWLRQ ZLGH EDVH WLUHV DLU RQ WKH UXQ DQG D EDFN XS VSULQNOHU V\VWHP $GG WR WKDW D FDE GHVLJQ WKDW RIIHUV RXWVWDQGLQJ YLVLELOLW\ IRU WKH RSHUDWRU DQG D XQLTXH GXDO FLUFXLW EUDNLQJ system for enhanced safety â&#x20AC;&#x201C; and you are ready to produce superior compaction results. 3HUIRUPDQFH DQG UHOLDELOLW\ DUH WKH PRVW important factors customers want from their rollers. With Dynapacâ&#x20AC;&#x2122;s progressive design, you have FKRVHQ WKH ULJKW PDFKLQH IRU WKH MRE :DQW WR NQRZ PRUH" :H DUH DW \RXU VHUYLFH DW dynapac.com.

AUTHORIZED DYNAPAC DEALERS ANDERSON EQUIPMENT Bridgeville, PA 412.343.2300 &OHDUÂżHOG 3$ 814.765.5311 Clarion, PA 814.226.4100 Somerset, PA 814.443.2867 Cambridge Springs, PA 814.398.8819 Charleston, WV 304.756.2800 Fairmont, WV 304.366.3075 Buffalo, NY 716.877.1992 Rochester, NY 585.334.6770

ANDERSON EQUIPMENT Syracuse, NY 315.463.8673 Albany, NY 518.785.4500 Watertown, NY 315.788.5512 Endicott, NY 607.748.3400 Olean, NY 716.372.8822 Bangor, ME 207.942.0177 Cumberland, ME 207.829.5503 Manchester, NH 603.627.7696

ALL ISLAND EQUIPMENT CORP. W. Babylon, NY 631.643.2605 ASPHALT CARE Bensalem, PA 215.639.9800 ESSEX EQUIPMENT Essex Junction, VT 802.878.5316 HARTER EQUIPMENT Millstone Township, NJ 732.446.7600

For more information or a personal demonstration, call 210.474.5770 or visit an authorized Dynapac dealer near you.

STAFFORD Ashland, VA 804.798.4500 Roanoke, VA 540.992.4650 STEPHENSON EQUIPMENT Harrisburg, PA 717.564.3434 Lancaster, PA 717.859.1840 Wilkes-Barre, PA 570.654.4612

ATLAS COPCO BALTIMORE STORE 410.485.3366 ATLAS COPCO LUDLOW STORE Ludlow, MA Covering western MassDchuseWts and Connecticut 413.589.7439 LORUSSO HEAVY EQUIPMENT Walpole, MA 02081 508.660.7600

Part of the Atlas Copco Group

Page 60 • July 7, 2010 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

3517 Wayne White Rd., Climax, NC 27233

866-430-7539

jfwequip@aol.com www.jfwequipment.com

2004 Vogele 1110RTB track paver, Carlson EZIV screed w/electric heat 10-19 ft, Cummins 6BT 5.9L diesel engine

1998 Ingersoll Rand DD110 double drum 78" vibratory roller, Cummins diesel engine

Blaw Knox RW 195H road widener, reversible belt, 2-3 ft hydraulic extension, Detroit diesel engine, hydrostatic drive, 4 wheel drive

1984 Etnyre K chip spreader, 11 ft spread hopper, Detroit diesel engine, 5 spd manual transmission

1999 Etnyre 2000 gallon distributor, computer w/1 ft cut-offs, 12 ft spray bar, propane heat, spray wand, front mount pump, Chevrolet C7500 w/Cat 3126 diesel engine, 6 spd transmission, air brakes

1997 Blaw Knox PF 161 paver, Omni IA screed 8-13 ft, J.D. diesel engine

2004 Blaw Knox PF 3200 paver, Cummins diesel engine, Omni IIIE screed w/electric heat 10-18 ft, power crown

1992 Kenworth T800 tandem water truck, 4000 gallon, 2 front spray heads, 2 rear spray heads, Cat 3406 diesel engine, 10 spd transmission, air brakes

1988 Etnyre SAM 2600 gallon distributor, computer w/1 ft cut-offs, 10 ft spray bar, diesel heat, Peterbilt 357 w/Cummins L10 diesel engine, Eaton Fuller 8 spd trans, air brakes

Serving Serving the the Asphalt Asphalt Industry Industry for for 25 25 Years Years (770) 554-2400 er Call for the deal Toll Free: (877) 218-3240 nearest you.

Fax: (770) 554-6540 509 Plantation Dr. • Loganville, GA 30052 email: sales@puckett-equipment.com

Expect the Best in Quality, Simplicity & Dependability

580 ASPHA LT PAVER

How can you help protect

the prairie and the penguin?

tions: SpecificaHopper

Feet 6-1/2 Ton - 8 to 13 th id W g vin l Engine Basic Pa Hp Diese 6 4 r o 8 3

Simple. Visit www.earthshare.org and learn how the world’s

leading environmental groups are working together under one name. And how easy it is for you to help protect the prairies and the penguins and the planet.

Please visit our website for additional specifications and information on our Models 540 and 560

www.puckett-equipment.com

www.earthshare.org

One environment. One simple way to care for it.

Construction Equipment Guide â&#x20AC;˘ Paving Section â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ July 7, 2010 â&#x20AC;˘ Page 61

7YV\K [V IL

LK ^OP[L HUK IS\L

.. ITH. W DO d T I ures an A H t W a E IN seful fe s? NOT rward. D I R P ec u novation raightfo t d a s Ro le in but st . Plu b 1 i s # n d e t s se licat ity i produc es. l p i m b o a a c li su c re se from any is e t d Roa respon ert for ics to fast ving exp mechan Lets me t a y & pa y of m ERH Âż\ ave gre t Abili PIWLSSX t AND h es n F atur XVSY lf-relia e f e gn be s rt. Desi ing. . e o v lu supp e va -free pa All l a r s o e f n r io s High egregat road great l u t. s f auti with a the Bes for e b ith ing ting Crea e. Work g Iâ&#x20AC;&#x2122;m w s to u . Knowin team

4(+, 05 ;/, <:( Contact Roadtec for support or more info on our products.

ROADTEC

an Astec Industries Company 800 MANUFACTURERS RD â&#x20AC;˘ CHATTANOOGA, TN 37405 â&#x20AC;˘ FAX 423.267.7104 â&#x20AC;˘ roadtec.com 0$18)$& 785(56 5' Â&#x2021; $ &+ 77$122*$ 71 86$ Â&#x2021; Â&#x2021;USA )$; â&#x20AC;˘ 423.265.0600 Â&#x2021; P URDGWHF

Page 62 • July 7, 2010 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

PAVING

THE WAY

Gehl Power Box® Asphalt Pavers deliver a quick paving job, leading to repeat business and referrals. •

Paving widths from 4 to 13 feet

•

Paving depths adjustable to 6 inches

•

Speeds as high as 130 fpm

•

Direct-drive track system is self-adjusting with a hydraulic cylinder

•

Exhaust and/or propane heated screed

•

Infinite control over travel speed, matching any paving condition (model 1648)

All Island Equipment 39 Jersey Street • West Babylon, NY 11704 631/643-2605 631/643-4060 www.allislandequipment.com

Construction & Industrial Equipment Corp. 200 Route 17 South • Lodi, NJ 07644 201/845-6800 www.constructionindustrial.com

gehl.com

Dynapac Offers Online Campus for Training, Certification Dynapac has developed a comprehensive training and certification program to engage and educate its customers. Known as the Dynapac Campus Online Certification Program, participants will be provided a series of interactive, self-paced courses complemented by optional in-person training that allows Dynapac customers to educate their workforce in a consistent and costeffective manner. Because it is available online, owners can equip operators and foremen with critical safety and best practices skills to construct a quality mat at any time, from any location. “Dynapac will accomplish several goals with its training and certification program,” said George Platt, Dynapac’s vice president of paving and milling. “We will educate customers and employees on Dynapac equipment and its benefits. Online courses enable us to reach customers worldwide and ensure that the training we provide is consistent and effective. As a result, Dynapac’s certification program will position us as an industry leader in knowledge and education.” The program elements include several components: • Interactive training courses. Online, self-paced training lessons containing animations, videos and graphics to illustrate concepts and demonstrate techniques, allowing Dynapac customers to complete training from any location, at any time, in any language. • Classroom training courses. Dynapac trainers will be provided course materials that complement their online counterparts to

ensure Dynapac customers worldwide are receiving a consistent message. • Online assessment. Following each training course, assessments will be delivered to measure retention of the participants and effectiveness of the training and determine where additional training may be necessary. • Certification and endorsements. Following completion of a designated set of courses, participants will receive a Dynapac branded certification that demonstrates proficiency on a topic. The program is not only beneficial to operators and foremen, but also owners and sales professionals. Owners will acquire a thorough knowledge of Dynapac equipment, assuring them of their investment, while sales professionals will be able to better communicate the use and value of the equipment to their customers. “By thoroughly educating people that own, operate and sell Dynapac equipment on a day-to-day basis, we can help increase the quality of the end-product that is constructed using Dynapac equipment,” said Platt. Current courses that are available are Asphalt Paver Certification and Asphalt Compaction Certification. Milling Machine Certification and Soil Compaction Certification are scheduled for March 2011, and future course offerings will be determined. For more information, visit www.dynapac.com.

Construction Equipment Guide â&#x20AC;˘ Paving Section â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ July 7, 2010 â&#x20AC;˘ Page 63

Every Solution for Your Paving Needs Asphalt Pavers (Sizes range from 10,000 - 33,000 lbs) Asphalt Rollers Motor Graders Pot Hole Patchers

Brooms Asphalt Distributors Concrete Curber Conveyor Belt Loaders

64 ,EE"OY )NC s ,INCOLN #OUNTY 0ARKWAY %XT s ,INCOLNTON .# s #ALL s WWW LEEBOY COM

STEPHENSON EQUIPMENT, INC.

JESCO 1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080 Fax: 973/575-5553

118 St. Nicholas Ave. S. Plainfield, NJ 07080 908/753-8080 800/241-7070 Fax: 908/753-7853 www.jesco.us

HOFFMAN EQUIPMENT COMPANY

VALLEY SUPPLY & EQUIPMENT CO., INC.

1440 Route 9W Marlboro, NY 12542 845-236-3000 www.hoffmanequip.com

20332 Leitersburg Pike Hagerstown, MD 21742 301/733-7414 1109 Middle River Rd. Baltimore, MD 21220 410/780-4000

US MUNICIPAL SUPPLY INC. King of Prussia, PA www.usmuni.com 800/733-3776

STEPHENSON EQUIPMENT, INC. Harrisburg, PA 800/325-6455 Fax: 717/564-7580 Lancaster, PA 800/347-6998 Wilkes-Barre, PA 866/667-6756

Syracuse, NY 800/368-6455 Albany, NY 518/357-2200

WALSH EQUIPMENT INC.

ALL ISLAND EQUIPMENT

796 Unionville Rd. Prospect, PA 16052 724/865-9221 walshequipmentinc.com

39 Jersey Street West Babylon, NY 11704 631/643-2605 631/643-4060 www.allisland equipment.com

Page 64 • July 7, 2010 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

HEAVY HITTERS

BVPSeries Single-Directional Vibratory Plates Unveiled

You get more performance, reliability and productive per square foot with Stone compactors. Stompers®, forward and reversible plates, walk-behind and ride-on asphalt and dirt rollers, manual and remote control trench rollers - all designed to hit hard and travel fast. They’ll get your job done on time and on budget. When you need a real compaction performer call in one of the heavy hitters from Stone - a 100% employees owned American company.

The BVP 10/36 weighs 183 lbs. (83 kg), has a working width of 14.2 in. (36 cm), and a centrifugal force of 2,250 lbs.

NORRIS SALES COMPANY, INC.

KNICKERBOCKER RUSSEL CO, INC.

1300 East Ridge Pike Plymouth Meeting, PA 19462 610/279-5777 1-800/457-RENT Fax: 610/279-7973

4769 Campbells Run Rd. Pittsburgh, PA 412/494-9233 Fax: 412/787-7991

668 Berlin Cross Keys Rd. Sicklerville, NJ 08081 856/740-1400 Fax: 856/740-1940 866/80-TOOLS (86657)

The new Bomag BVP Series single-directional vibratory plates — the BVP 10/36 and the BVP 18/45 — are designed to be versatile, hardworking machines that can be used for a variety of jobs, from soil compaction to asphalt to pavers and patios. The base plate offers extra width for compaction below fences or boundaries. An optional Vulcolan mat helps prevent damage to paving stones or bricks. A water tank and sprinkler system are offered as options. Powered by air-cooled Honda gasoline engines, they feature an engine protection frame to help prevent damage. The engine has an oil alert to make maintenance easier, and is isolated from vibration to enhance durability. A bolt-on exciter is easy to remove and maintain, reducing maintenance costs, according to the manufac- The BVP 18/45 weighs 201 lbs. (91 kg), has a working width of 17.7 in. (45 cm), and 4,050 lbs. of centurer. A wide range of options and trifugal force. features make the BVP comThe BVP 10/36 weighs 183 lbs. (83 kg), pactors easy to use for professionals as well has a working width of 14.2 in. (36 cm), and as do-it-yourself consumers. The steering a centrifugal force of 2,250 lbs. The BVP handle is isolated from vibration and is fold- 18/45 weighs 201 lbs. (91 kg), has a working able and removable. The balanced lifting width of 17.7 in. (45 cm), and 4,050 lbs. of point, carrying handles and optional trans- centrifugal force. port wheels make the compactors easy to For more information, call 800/782-6224 move to and from the job site. or visit www.gobomag.com.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 7, 2010 • Page 65

Tru-Pac 915

SPRH Chip Spreader

RA-400 Spray Patcher

Maximizer 3 Asphalt Distributor Features:

· · · · ·

8 to 16 Foot Extendible Spraybar Automatic In-Cab Controls 400 GPM Viking Asphalt Pump Enviro-Flush Clean-Out System Internal Spraybar Valves

MAXIMIZER 3 ASPHALT DISTRIBUTOR

Roadbuilding Solutions LeeBoy’s Rosco brand roadbuilding solutions are designed and built for the most demanding applications. From asphalt distributors and brooms to pothole patchers and chip spreaders, count on LeeBoy products for value that delivers bottom-line results. Durability, productivity, ease of operation and value have made LeeBoy an industry leader.

Contact your Rosco Dealer

STEPHENSON EQUIPMENT, INC.

39 Jersey Street 1440 Route 9W 1275 Bloomfield Ave. West Babylon, NY 11704 Marlboro, NY 12542 Fairfield, NJ 07004 631/643-2605 845/236-3000 973/227-2221 631/643-4060 www.hoffmanequip.com 800/321-8080 www.allisland Fax: 973/575-5553 S. Plainfield, NJ 07080 equipment.com 908/753-8080 800/241-7070 Fax: 908/753-7853 www.jesco.us

King of Prussia, PA 800/733-3776 www.usmuni.com

1701 Roseneath Rd., Richmond, VA 23230 804/359-4048

Harrisburg, PA 800/325-6455 Fax: 717/564-7580 Lancaster, PA 800/347-6998

Wilkes-Barre, PA 866/667-6756 Syracuse, NY 800/368-6455 Albany, NY 518/357-2200

20332 Leitersburg Pike Hagerstown, MD 21742 301/733-7414 1109 Middle River Drive Baltimore, MD 21220 410/780-4000 www.valleysupply equipment.com

VT LeeBoy, Inc. • 500 Lincoln County Parkway Ext. • Lincolnton, N.C. 28092 • 704.966.3300 • www.leeboy.com

796 Unionville Rd. Prospect, PA 16052 724/865-9221 walshequipmentinc.com

Page 66 â&#x20AC;˘ July 7, 2010 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ July 7, 2010 â&#x20AC;˘ Page 67

!UTHORIZED "OBCAT $EALERS

THE SANDBOX JUST KEEPS GETTING BIGGER.

CONNECTICUT

NEW YORK

Bobcat of Connecticut, Inc.

Bobcat of Buffalo South

East Hartford 860-282-2648

Chaffee s "/"#!4

www.bobcatct.com

www.bobcatofbuffalo.com

Bobcat of Connecticut, Inc.

Bobcat of Saratoga

Stratford 203-380-2300

'ANSEVOORT

www.bobcatct.com

www.bobcatofsaratoga.com

MARYLAND

Bobcat of Buffalo

Bobcat of Baltimore, LLC Middle River s

Lockport s "/"#!4 www.bobcatofbuffalo.com

www.bobcatofbaltimore.com

Bobcat of Central New York

MAINE

ARE YOU M-POWERED?

East Syracuse

Jordan Equipment Company

www.bobcatofcny.com

Falmouth s

Bobcat of New York City

www.jordanequipment.com

MASSACHUSETTS

Maspeth 718-366-7930 www.bobcatzone.com

Bobcat of Boston

)NTRODUCING THE NEW "OBCATÂ§ - 3ERIES

North Reading s www.bobcatboston.com

excavators, which put operators and owners in charge of labor-saving, profit-producing

Springerâ&#x20AC;&#x2122;s, Inc. /NEONTA s www.springersinc.com

PittsďŹ eld Lawn & Tractor, Inc. PittsďŹ eld 413-443-2623 www.plt.com

Robert H. Finke & Sons, Inc. Selkirk www.ďŹ nkeequipment.com

features that take performance to the next

Bobcat of Worcester Shrewsbury www.bobcatboston.com

level. Smooth, refined hydraulics, auto idle, incredible drive performance with auto shift

Springerâ&#x20AC;&#x2122;s, Inc. St. Johnsville s www.springersinc.com

Bobcat of Greater SpringďŹ eld West SpringďŹ eld 413-746-4647 www.bobcatct.com

Bobcat of Watertown Watertown www.bobcatofwatertown.com

AND MANY MORE NEW FEATURES !LL THIS IN A stronger, lighter machine. See your dealer to

NEW HAMPSHIRE Bobcat of New Hampshire

PENNSYLVANIA

Chichester s

Highway Equipment & Supply Co.

www.bobcatnh.com

Drums www.hwyequip.com

learn how these new compact excavators can M-Power you to do more.

Bobcat of New Hampshire South Hudson s www.bobcatnh.com

NEW JERSEY

RHODE ISLAND J. J. Gregory & Son, Inc.

&REEHOLD s 3ALES '/"#!4 2ENTAL '3" "#!4

East Providence s

Bobcat of North Jersey, East 4OTOWA www.njbobcat.com â&#x20AC;&#x153;Bobcatâ&#x20AC;? is a registered trademark of Bobcat Company | #0610902

Quarryville 717-786-7318

Garden State Bobcat, Inc. www.newjerseybobcat.com

THE NEW E32 CONVENTIONAL SWING COMPACT EXCAVATOR

Grumelliâ&#x20AC;&#x2122;s Farm Service

www.gquip.com

Page 66 â&#x20AC;˘ July 7, 2010 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ July 7, 2010 â&#x20AC;˘ Page 67

!UTHORIZED "OBCAT $EALERS

THE SANDBOX JUST KEEPS GETTING BIGGER.

CONNECTICUT

NEW YORK

Bobcat of Connecticut, Inc.

Bobcat of Buffalo South

East Hartford 860-282-2648

Chaffee s "/"#!4

www.bobcatct.com

www.bobcatofbuffalo.com

Bobcat of Connecticut, Inc.

Bobcat of Saratoga

Stratford 203-380-2300

'ANSEVOORT

www.bobcatct.com

www.bobcatofsaratoga.com

MARYLAND

Bobcat of Buffalo

Bobcat of Baltimore, LLC Middle River s

Lockport s "/"#!4 www.bobcatofbuffalo.com

www.bobcatofbaltimore.com

Bobcat of Central New York

MAINE

ARE YOU M-POWERED?

East Syracuse

Jordan Equipment Company

www.bobcatofcny.com

Falmouth s

Bobcat of New York City

www.jordanequipment.com

MASSACHUSETTS

Maspeth 718-366-7930 www.bobcatzone.com

Bobcat of Boston

)NTRODUCING THE NEW "OBCATÂ§ - 3ERIES

North Reading s www.bobcatboston.com

excavators, which put operators and owners in charge of labor-saving, profit-producing

Springerâ&#x20AC;&#x2122;s, Inc. /NEONTA s www.springersinc.com

PittsďŹ eld Lawn & Tractor, Inc. PittsďŹ eld 413-443-2623 www.plt.com

Robert H. Finke & Sons, Inc. Selkirk www.ďŹ nkeequipment.com

features that take performance to the next

Bobcat of Worcester Shrewsbury www.bobcatboston.com

level. Smooth, refined hydraulics, auto idle, incredible drive performance with auto shift

Springerâ&#x20AC;&#x2122;s, Inc. St. Johnsville s www.springersinc.com

Bobcat of Greater SpringďŹ eld West SpringďŹ eld 413-746-4647 www.bobcatct.com

Bobcat of Watertown Watertown www.bobcatofwatertown.com

AND MANY MORE NEW FEATURES !LL THIS IN A stronger, lighter machine. See your dealer to

NEW HAMPSHIRE Bobcat of New Hampshire

PENNSYLVANIA

Chichester s

Highway Equipment & Supply Co.

www.bobcatnh.com

Drums www.hwyequip.com

learn how these new compact excavators can M-Power you to do more.

Bobcat of New Hampshire South Hudson s www.bobcatnh.com

NEW JERSEY

RHODE ISLAND J. J. Gregory & Son, Inc.

&REEHOLD s 3ALES '/"#!4 2ENTAL '3" "#!4

East Providence s

Bobcat of North Jersey, East 4OTOWA www.njbobcat.com â&#x20AC;&#x153;Bobcatâ&#x20AC;? is a registered trademark of Bobcat Company | #0610902

Quarryville 717-786-7318

Garden State Bobcat, Inc. www.newjerseybobcat.com

THE NEW E32 CONVENTIONAL SWING COMPACT EXCAVATOR

Grumelliâ&#x20AC;&#x2122;s Farm Service

www.gquip.com

Page 68 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Page 70 • July 7, 2010 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

Buckets Leading Edge Attachments Inc.

Rockland

Leading Edge Attachments Inc. now offers the “STAG” bucket, which is a new style, high penetration bucket utilizing the “staggered tooth” technology, and is designed for excavators allowing the operator to easily dig compacted soils, coral, shale, caliche, stratified materials, shot rock or frozen ground with higher concentrated breakout force for a price that is lower than the company’s Multi-Ripper bucket. The STAG bucket design allows the operator to focus the excavator’s full breakout force on one tooth at a time because the front leading edge is angled. Creating flat trench bottoms is easy with this bucket also because the teeth are on the same plane, similar to a conventional bucket, according to the manufacturer. Conventional buckets have the teeth mounted on an edge that so that all of the teeth engage the material at the same time thus sharing the load and decreasing the tooth breakout force. The LEA STAG bucket creates high penetration due to the fact that one tooth is engaging at a time. The operator angles the bucket in tough digging conditions allowing the forces to be transmitted to fewer teeth, thus saving energy and increasing performance, while still being able to shave the bottom of a trench flat similar to a conventional bucket. The STAG bucket is manufactured in the USA using T1 alloy steel and the powerful MTG KingMet teeth, and is available to fit on any excavator from 22,000 to 200,000 lbs. (9,979 to 90,718 kg). The Multi-Ripper Teeth also are available for some models, to provide even more penetration. For more information, call 866/928-5800 or visit www.leadingedgeattachments.com.

Rockland’s Entek Krypto Klaw is an ideal tool for demolition and land-clearing applications where precision and maximum clamping force are required. The Krypto Klaw design brings the bucket and thumb together as one collective working unit resulting in maximum operator efficiency and full use of the excavator’s reach throughout 100 percent of the curl cycle. The Entek Krypto Klaw is designed to work with all sizes of excavators from mini-excavators to the larger machines, according to the manufacturer. The Entek Krypto Klaw performs like a grapple while retaining the advantages of an excavator bucket. Once the load is clamped, operators use curl control to position the load. Its multi-rib, open design allows for maximum operator visibility while manipulating material. The Krypto Klaw mates directly with the stick, saving time and money during the installation process. Pin or couple the Krypto Klaw to the excavator, plug in two hydraulic lines and go to work, no welding or additional miscellaneous parts required, the manufacturer said. The Entek Krypto Klaw is manufactured from long-wearing, high strength, quenched and tempered steel, and reinforced with AR400 in all critical wear areas, to include the cutting edge, doubler plates and bottom-side wear plates. It is covered by Rockland’s one-year, 2,000 hour warranty. Rockland Manufacturing has designed and manufactured specialty and standard attachments for loaders, dozers, excavators, graders and skid steers for more than 60 years. Rockland’s custom and specialty products are engineered to fit the customer’s specific application. Standard attachments are designed to fit all makes of equipment. The company’s 130 standard products include buckets, thumbs, blades, rakes and forks. For more information, call 814/623-1115 or visit www.rocklandmfg.com.

AIM Attachments AIM Attachments now offers a complete line of heavy duty loader grapple buckets for wheel loaders of all sizes. Grapple buckets feature durable construction with an AR400 steel cutting edge with reinforced corners and gussets. The GPL bucket design also features an abrasion resistant bottom with thick wear straps. The hydraulic clamps feature a bolt-on middle design that allows the clamps to be used in dual and single configurations. The AIM GPL bucket is ready for stockpiling, bank loading, as well as excavation tasks. The sloped bottom design provides maximum dump clearance and maintains the breakout forces of the machine. For more information, call 800/803-3365 or visit www.aimattachments.com.

Terex ASV When material needs to be moved, general-purpose dirt buckets are the most common and versatile attachment available for all Terex ASV compact track loaders. They are the most common and versatile attachment available for digging, carrying and loading dirt and other materials. These general-purpose buckets connect quickly and easily to the loader’s quick attach interface — standard on all Terex ASV compact track loaders. Constructed to handle multiple applications, Terex ASV buckets are reinforced at all cutting edges to handle the rigors of any job. The front cutting edge features a reversible bolt-on hardened steel edge and also can accommodate a bolt-on tooth bar.

CEAttachments Inc. CEAttachments Inc., a global supplier of attachments for compact equipment, added three Edge high dump buckets to its lineup of specialty bucket attachments. Ideal for loading feed mixers and trucks used in agricultural and construction applications, the Edge high dump buckets pivot the bucket for dumping, increasing vertical lift by approximately 44 in. (118 cm) and horizontal reach by approximately 13 in. (33 cm), according to the manufacturer. Features of these specialty buckets include two heavyduty hydraulic cylinders that pivot the bucket 86 degrees and a see-through spill guard allows for greater visibility. The buckets also feature a .75 by 6 in. (1.9 by 15 cm) edge with holes to accept an optional bolt-on cutting edge. Three Edge high dump buckets are offered, including 72, 84 and 96 in. (183, 213 and 244 cm) models with a heaped capacity of up to 43.9 cu. ft. (1.2 cu m) depending on the model. All three buckets are 29.8 in. (75.6 cm) high and 47.3 in. (120 cm) deep. Units come complete with hoses and flat face couplers, and an optional bolt-on cutting edge is available. The Edge high dump buckets are recommended for loaders with operating capacities greater than 1,800 lbs. (816 kg). A full line of accessories such as bolt-on edges, serrated edges, tooth bars, teeth and grapples also are available. For more information, call 866/232-8224 or visit www.ceattachments.com. see BUCKETS page 76

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • July 7, 2010 • Page 71

We’ve become attached to your machines. Sandvik G-Series hydraulic impact hammers

Sandvik E-Series hydraulic impact hammers

Ho-Pac ® vibratory compactor/drivers

Pedestal Breaker System™ stationary boom systems

Where can you go to get high performance boom-mounted attachments?

Allied Construction Products, LLC

For over 65 years, we’ve developed many attachments that are legendary in the construction and demolition industries that demand high performance. Names like Ho-Ram, Hy-Ram®, Rammer, Ho-Pac® and Pedestal Breaker System™ are names that equal: UÊ Simple, proven design (Our attachments have high resale or trade-in value) U Reliable performance (If you purchased an Allied attachment, you’re probably still using it) U Superior productivity (Compare AEM – formerly CIMA– ratings, our attachments get the job done faster)

AR Series™ hydraulic impact hammers

Hy-Ram® hydraulic impact hammers

Contractor’s Mechanical Grapple material and waste handling systems

And, now Allied adds to that great family background with the Sandvik AR Series™ and all-new Hy-Ram® hammers. Allied’s attachments don’t take a back seat to any competitor. In particular, our Sandvik product features a long-stroke design, all oil operation and ProControl. All of our high performance boom-mounted attachments are supported by the most respected parts and service organization in North America. Customer satisfaction is job one at Allied. Great products supported by people who know the industry and its customers. To put a high performance Allied attachment on your machine, call 1-800-321-1046 for the name of the Allied Distributor nearest you. We’ve become attached to your machines.

Page 72 • July 7, 2010 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

Miscellaneous

IR 68” Hydraulic Angle Broom for Skid Steer (New) $4,120 Grouser 8’6-Way Blade for Skid Steer (New-Demonstrator) $4,133 Sweepster (Mustang) 60” SP Hopper Broom for Skid Steer (Used) $1,650 Landpride 7.5’ Finish Mower 3-Point Hitch/PTO (Used) $2,600 Harley T-6 3-Point Hitch Rake/PTO (New-Demonstrator) $6,700 Harley TM-7ST 3-Point Hitch Rake/PTO (New) $7,700 FFC Preparator for Skid Steer (New) $5,600 JD 48” 5000# Forks for 480B/C Forklift (New) $750

Kenco

AIM Attachments

The Kenco Barrier Lift can be used on any concrete median barriers, sound walls, curbing and piling. It also is useful for aligning barriers that have already been placed. The barrier lift is ready for operation by simply using a lifting sling such as the Kenco RigMAX attached to any type or model of machine with lifting capabilities and elastomer pads enable performance even in wet weather. All models are available with optional self-aligning guides. The guides extend down from one set of the pads to allow the lifter to align itself with the barrier wall whenever the lifter is lowered into position. This optional feature also can be purchased separately to attach to earlier models of the Kenco barrier lift. Lifting capacities are available from 1,500 to 30,000 lbs. (680 to 13,608 kg). Kenco furnishes attachments for excavators from mini to 200,000 lbs. (90,718 kg), wheel loaders from 1 to 40 yd. (.9 to 36 m), dozers, and skid steer machines. For more information, call 800/653-6069 or visit www.kenco.com.

AIM Attachments’s HDT62 universal mechanical excavator thumb features an AR400 steel structure built for a tight fit to work in coordination with any bucket. AIM HDT62 thumbs are 24 in. (61 cm) wide and 62 in. (157 cm) long. They are designed to fit 30,000 to 40,000 lb. (13,608 to 18,144 kg) machines. Standard features include oversized pins, specially designed AR400 steel tines with serrated edges, and three working positions. HDT62 thumbs have been engineered to fold up tight and make storing a fast and simple process. For more information, visit www.aimattachments.com.

CEAttachments Inc. The EDGE power rake from CEAttachments Inc. quickly pulverizes soil, removes rock and debris, finish-grades, spreads fill or topsoil and de-thatches. Features include a powerful direct-drive motor turning a bi-directional drum that works the soil forward and backward and long-lasting carbide teeth positioned for maximum coverage. This unit has no gearbox that requires maintenance and is designed for skid steers, backhoes, loaders and tractors with 3-point hitches. The product is available in three widths — 48, 72 and 90 in. (122, 183 and 228 cm). For more information call 866/232-8224 or visit www.ceattach.com.

AIM Attachments AIM Attachments’s HDT40 universal mechanical excavator thumb features a tough, AR400 steel structure built for a tight fit to work in coordination with any bucket — without wasted motion. AIM HDT48 thumbs are 12 in. (30.5 cm) wide and 40 in. (101.6 cm) long and are designed to fit backhoes loaders and excavators. Standard features include oversized alloy steel pins, specially designed AR400 steel tines with serrated edges, and a mounting bracket with three working positions. HDT48 thumbs have been engineered to fold up tight and make storing a fast and simple process.

Paladin Construction Group McMillen 75 Series Augers by Paladin Construction Group dig holes for utility, construction and landscaping applications with minimal damage to the surrounding area. The series includes a broad selection of models that attach to skid steers, backhoes, tractors, wheel loaders, excavators and telehandlers. McMillen 75 Series Augers utilize a sealed planetary reduction auger drive to efficiently and safely dig holes through most dirt conditions. With auger diameters ranging from 4 to 36 in. (10 to 91 cm), operators have the flexibility to dig specific hole sizes that match each application. The heavy-duty, all gear design provides extended life with minimal maintenance and service, according to the manufacturer. All moving components are completely sealed and lubricated for maximum cooling and minimum wear during the job. McMillen 75 Series Auger drives are bi-directional, allowing the operator to back out of an obstruction and quickly pull the auger drive from the hole. If immovable or hard objects are hit while digging, an internal hydraulic relief valve protects the unit and hydraulic system. This feature also allows these drives to perform at maximum capacity across a wider range of loaders. Each auger comes with a comprehensive 2-year warranty that includes the planetary drive. Paladin Construction Group is a manufacturer of attachments throughout North America for the construction, aggregate, agriculture, landscaping, land clearing, recycle, mining, demolition, utility, aviation and municipal market segments. For more information, call 800/456-7100 or visit www.paladinbrands.com. see MISCELLANEOUS page 74

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • July 7, 2010 • Page 73

BINDER MACHINERY CO. 2820 Hamilton Blvd. South Plainfield, NJ 07080 980/561-9000 201 North Route 73 Winslow Township, NJ 08095 856/767-5900

EAST PBE, INC. 283 Pane Road Newington, CT 06111 860/665-7470 Fax: 860/665-7478

PINE BUSH EQUIPMENT INC. www.pbeinc.com Pine Bush Office 97 Rt. 302 P.O. Box 106 Pine Bush, NY 12566 845/744-2006 Fax 845/744-2900 Holmes Office www.pbeinc.com 24 Sybil Court Holmes, NY 12531 845/878-4004 Fax 845/878-9626

EDWARD EHRBAR INC. www.ehrbar.com 4 Executive Plaza Yonkers, NY 914/738-5100 Fax: 914/738-6847 601 Coates Ave. Holbrook, NY 11741 631/563-7600 Fax: 631/218-1069 42 Kenosia Ave. Danbury, CT 203/743-0088

MIDLANTIC MACHINERY INC. 2240 Bethlehem Pike Hatfield, PA 19440 215/822-0145 Harrisburg, PA 717/652-3190 Wilkes-Barre, PA 570/824-9891 Delmar, DE 302/846-0224 Odessa, DE 302/449-2850 Baltimore, MD 410/247-2100

Page 74 • July 7, 2010 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

DEMOLITION Attachments

Miscellaneous MISCELLANEOUS from page 72

Indexator Rototilt combines continuous rotation, 40 degree side tilt in each direction, and a hydraulic quick coupler all in one package. It allows a bucket or other attachment to be rotated and tilted at the same time, making it simple to operate around or under obstacles, and for any type of ground contouring. The combination of continuous rotation and side tilt lets operators approach jobs from any angle, according to the manufacturer. Rototilt is available in five models covering excavators and backhoes from 3 to 30 ton (2.7 to 27 t) capacity. For more information, call 519/754-2195 or visit www.indexator.us

For Sale or Rent

NPK Material Processor

M28

An efficient solution for concrete, steel and rebar processing, building and bridge demolition, and recycling -

Attachments International The Attachments International super land plane is designed for professionals who require precise grades and maximum efficiency. This unit can be pushed for maximum cutting power and used in reverse for precise leveling. Sifting bars allow sorting of unwanted debris and the actual transporting and dumping at different locations. An optional hydraulic ripper is for extreme service conditions and aggressive rippers will cut hard pans, shale, etc.

6,500 lbs / 116 tons force

Caterpillar

Hammers Compactors Quick Attach Coupler Systems Material Processors Crushers Grapples

Complete Hydraulic Kits Designed Specifically to Fit Your Carrier!

Albany 518-785-8013 800-926-4227

Binghamton 607-754-6570

Buffalo 716-681-7100 800-834-9606

Elmira 607-739-8741

www.monroetractor.com

Rochester 585-334-3867 866-683-5338

Syracuse 315-452-0000 800-287-5286

The Caterpillar center-lock pin-grabber coupler for Cat hydraulic excavator models 311 through 385 uses an over-center locking mechanism and two hydraulic locking features to ensure positive work-tool attachment. The over-center locking technology promotes job site safety and allows operators to quickly, simply and confidently engage and disengage work tools regardless of boom and stick position. The center-lock coupler accommodates the same range of Cat work tools as previous pin-grabber couplers, as well as a broad range of other brands of buckets and tools. When the operator uses an in-cab switch to engage the center-lock coupler with a work tool, the coupler’s robust cylinder extends to close the primary hook around the tool’s rear pin. As the cylinder rod continues to close around the rear pin, the cylinder housing adjusts its position and forces a combination of three attached parts — center-lock rocker, connector link and secondary lock — to snap into an over-center position (much like closing the handles of locking pliers). This action forces the secondary lock to grip the forward pin. Once the coupler locks, the mechanical principles involved in its over-center locking technology ensure that any working forces applied to the pins will serve only to increase the coupler’s grip. Constant hydraulic force exerted by the cylinder and the action of a counterbalance valve provide additional locking forces, supplementing that of the mechanical lock. The center-lock coupler remains positively closed until the operator takes the deliberate actions of activating the in-cab switch and extending the bucket cylinder. For the operator’s convenience and for job site safety, the secondary lock is distinctly visible from the cab and provides an unmistakable indicator of the coupler’s status — whether locked or unlocked. Because the center-lock coupler eliminates the blocking bar and spring pack required with conventional pin-grabber designs, the operator no longer needs to completely curl the boom and stick (thus inverting the coupler) when engaging a work tool. The center-lock design requires only that the bucket cylinder be extended to activate locking and unlocking functions, and this action is independent of boom and stick position. The resulting advantage is that the operator can engage and disengage tools with the boom and stick at full extension, a valuable feature when changing tools in low-overhead situations, such as near power lines. Maintaining the center-lock coupler requires only daily greasing, and to promote troublefree operation, a jumper-line routing helps avoid pinching or snagging on job site hazards. For more information, visit www.cat.com

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • July 7, 2010 • Page 75

Page 76 • July 7, 2010 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

Buckets BUCKETS from page 70

AIM Attachments AIM Attachments manufactures a variety of different excavator buckets for machines of all sizes. These buckets feature hardened steel construction highlighted by AR400 steel cutting edges and side cutters. The buckets use AR400 steel, which is tougher, harder and more wear resistant than other steel plates — 30 percent stronger and 46 percent harder than commonly used T-1 steel, according to the manufacturer. AIM HD6 excavator buckets offer thick wear straps/cutting edge and an open design for easy cleaning. These buckets are currently available in heavy duty and severe duty configurations for 6 to 12,000 lb. (2,721 to 5,443 kg) machines. AIM SRB excavator buckets also offer thick horizontal wear straps and full-curve side wear straps. These buckets remove rocks and debris without removing soil. The SRB also has a heavy duty lifting D-ring. For more information, visit www.aimattachments.com.

Blue Diamond The Blue Diamond stump bucket is made from .5 in. (1.3 cm) steel that is double layer at the tip and uses a 1 by 8 in. (2.5 by 20 cm) cutting edge. This bucket measures 56 in. (142 cm) from mount to the tip of the cast replaceable teeth. The narrow profile allows for deep penetration into hard soils and the curved bottom allows the bucket to do the prying action instead of relying on the breakout force of the machine.

CEAttachments Inc. CEAttachments Inc. a global supplier of attachments for compact equipment, added Edge 4-in-1 combination buckets to its lineup of specialty buckets for skid steer loaders. One 4-in-1 combination bucket can be used for a variety of applications such as site cleanup, grading, scraping, grappling, dozing dirt, brush removal, material spreading and more. These multipurpose buckets are constructed of high-strength steel and the clam shell bottom is shaped to prevent bowing of heavy material. Two sleeved and guarded heavyduty cylinders provide powerful clamping, while cylinder components inside remain protected from debris, according to the manufacturer. All buckets have a depth of 36.3 in. (92 cm) and a height of 21.3 in. (54 cm). Standard-duty models are recommended for loaders with operating capacities less than 2,400 lbs. (1,088 kg) and are available in 60, 66 and 72 in. (152, 167 and 183 cm) widths. Heavy-duty models are recommended for loaders with operating capacities more than 2,400 lbs., are offered in 66, 72, 78 and 84 in. (167, 183, 198 and 213 cm) widths and are available in models with teeth or without teeth. The heavyduty buckets also feature reinforcement plates in the bucket to withstand rugged applications, and a unique holding valve to keep the clam in locked position when needed. All Edge 4-in-1 combination buckets come standard with .75 by 6 in. (1.9 by 15 cm) weld on cutting edges, as well as bolt on cutting edges for the front dozer edge and the rear of the clam edge. An optional cutting edge or serrated edge is available for the front bucket, and all units come complete with hoses and flat face couplers. The Edge 4-in-1 combination buckets join the lineup of Edge buckets including dirt/construction buckets, utility buckets, bulk material buckets, high dump buckets, skeleton rock buckets and utility fork buckets, as well as many bucket accessories, toothbars, bolt on edges and bolt on grapples. For more information, visit www.ceattachments.com.

Bobcat The Bobcat rock buckets make quick and easy work of removing objects from the soil and are ideal for contractors and landscapers preparing or clearing land or for farmers and homeowners working on their property. “Bobcat rock buckets are great for removing rocks, sorting or sifting materials and removing debris. The tines allow you to retain the stones and debris, while the soil sifts through, helping you separate the material,” said Chris Knipfer, Bobcat attachment product specialist. The Bobcat rock bucket is designed to last in tough working conditions. The tines are fully gusseted on each side and interconnected to one another to provide strength and durability. The skeletal design of the rock bucket means the cutting edge of the attachment is always visible to the operator. The buckets are easy to use — operators simply submerge the tines below the grade and object. When the bucket is raised back up, the object stays in the bucket while the loose material falls through the tines, causing minimal disturbance to the ground, according to the manufacturer. Bobcat rock buckets are available in four sizes: 62-, 68-, 74- and 82-in. (157, 173, 188 and 208 cm) widths. The rock buckets are approved for use on Bobcat skid steer loaders, compact track loaders, all-wheel steer loaders, Toolcat utility work machines and the V417 VersaHandler telescopic tool carrier. For more information, visit www.bobcat.com.

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • July 7, 2010 • Page 77

Page 78 • July 7, 2010 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

Cutters General Equipment Company General Equipment Company’s 130C CUT-R-TACH is a cost-effective solution for many asphalt cutting projects, such as road patching, scoring and edging, and various tasks for pipeline, street, water and sewer applications, according to the manufacturer. The 130C clamps to most backhoe dippersticks or tractor/wheel loader buckets with up to 2.5 cu. yd. (1.9 cu m) capacities. No special tools, modifications or adapters are required. The twin-screw pivot clamp conforms to differ-

ences in bucket shapes and sizes and can be used in forward and reverse cutting. A 13.5 in. (34 cm)-diameter cutting blade is machined from a special service, heat-treated alloy steel and yields a maximum asphalt cutting depth of 5 in. (12.7 cm). The 130C is capable of producing high cutting rates with lighter machinery. Cutting blades are field replaceable without having to disturb bearings or seals. In business for more than 50 years, General Equipment

Co. is a family-owned manufacturer of earth augers, ventilation blowers, asphalt cutters and surface preparation equipment. For more information, call 800/533-0524 or visit www.generalequip.com.

Plows and Spreaders Hiniker Company Hiniker Company has added a pair of 1032 Series 10 ft. (3 m) plows to its line of high-performance trip-edge snowplows. Available in either electric/hydraulic or central hydraulic powered configurations, these plows are designed for use with trucks such as the GM 4500/5500 series, the Ford F-450 and F-550, and the Dodge 4500/5500 series. The 32 in. (81 cm) tall moldboard utilizes a dent-resistant, corrosion-free plowing surface made of low-friction HDPE polyethylene. A top-mounted extruded polyethylene snow deflector is included as standard equipment. One half by 8 in. (1.3 by 20 cm) cutting edges and cast ductile iron skid shoes are incorporated into the two-section split trip edges. The trip edges rotate on a 9.5 in. (24 cm) high pivot point, for enhanced protection from surface obstacles. The trip hinges have been designed to eliminate any pinch points, assuring a full return after tripping. A compact joystick controller that can be either surfacemounted or handheld controls all functions of the electric/hydraulic plow. Super-bright quad halogen headlamps are included with all 1032 plows, providing up to twice the lighting power of conventional sealed beam lamps. Fast hook-ups are provided by the Hiniker Quick-Hitch mounting system, a simple drive-in system that uses a single lever to lock the plow to the truck. For more information, call 800/433-5620 or visit www.hiniker.com.

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • July 7, 2010 • Page 79

Page 80 • July 7, 2010 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

Hammers and Breakers Atlas Copco The SB 452 is Atlas Copco’s final addition to its line of solid body hydraulic breaker attachments. The slim one-piece design contains all integral parts in the same iron alloy casting. The SB 452 offers a high power-to-weight ratio and boasts a maximum impact rate of 1,260 blows per minute, a 61-percent increase over its predecessor. Overall operating efficiency has been improved by 23 percent. The 972-lb. (441 kg) breaker requires oil flow of 14.5 to 27.7 gal. per minute (55 to 105 Lpm) at a pressure range of 1,450 to 2,175 psi and is suitable for carriers in the 7- to 14-ton (6.3 to 12.7 t) weight class. For more information, call 800/760-4049 or visit www.atlascopco.us.

Chicago Pneumatic Chicago Pneumatic’s gas powered breaker, the Red Hawk, doesn’t depend on an external power source with hoses or cables attached. It is an ideal tool for quick jobs and easy portability, such as use in breaking concrete, cutting asphalt, tamping and compacting soil, driving posts, fences, rods or spikes, in soil sampling and in driving profiles and tubes. Transportation to and from a work site is easily achieved in a van or the back of a car, according to the manufacturer. Due to new vibrationdampening handles, a slim body design and a low service weight of 50 lbs. (22.5 kg), Red Hawk offers maximum ergonomic protection and easy handling for the operator. An easy engine start, due to efficient choke control and carburetor, rounds off the product that completes the Chicago Pneumatic handheld product range. For more information, call 800/760-4049 or visit www.atlascopco.us.

Allied Construction Products Allied Construction Products LLC’s Hy-Ram HR Series hydraulic impact hammer has “streetwise” attributes like an oil and gas operation that increases efficiency, a longer piston stroke for higher impact power and an auto-stop system to prevent “blank firing.”

Allied has combined performance, efficiency and reliability in its all-new boommounted Hy-Ram impact hammer. With continuous improvements over the years, the Allied Hy-Ram still uses the same simple, proven design that first gained industry-wide acceptance for the hydraulic hammer concept, according to the manufacturer. Oil and Gas Operation One of the many features that contribute to the efficiency of the Allied Hy-Ram is the oil and gas operation. The Allied design of gas-assist using low pressure nitrogen improves the efficiency by reducing demand on the carrier’s hydraulic system. There is no dependency on hydraulic accumulators. The accumulators are merely used to eliminate hydraulic “spikes.” And, pressurized oil is always present at the bottom of the piston, which prevents internal cavitation. Another feature that contributes to the reliability of the Allied Hy-Ram is the long-stroke design, which minimizes recoil, reduces vibration and eliminates mechanical springs, according to the manufacturer. The Allied medium and large Hy-Rams also have an automatic Auto-Stop feature that prevents blank-firing once the demolition tool has penetrated through the material being broken and downpressure is no longer applied. Durable Housing Design The Allied Hy-Rams feature a durable housing design that suspends the internal working body inside a full-box enclosure to protect the hammer, reduce noise and minimize vibration and wear to the carrier. The durable housing design is enclosed at the bottom and incorporates a heavy-duty Hardox rock claw. HyRams also can have an optional AutoLube mounted on the hammer housing, which is an automatic lubrication system that dispenses lubricant by the hammer’s vibration. The AutoLube uses a high-grade chisel paste in handy replaceable cartridges. Installation Kits The Hy-Ram, which operates off of the carrier’s hydraulic system, requires an installation kit in order to be mounted on the backhoe/loader, excavator or similar carrier. Allied offers more than 2,500 installation kits to fit virtually every make and model carrier. The advantages of the all-new Hy-Rams include: • Full-box enclosure protects hammer and reduces noise • Shock-absorbing polyurethane acoustical inserts increase carrier endurance • Larger gas chamber ensures higher impact power • Autocontrol automatically regulates blow energy and

frequency (HR 150 through HR 1200) • Main Internal Control Valve System with large oil circuit generates low heat and operates with high-efficiency • Autogrease system eliminates the need for manual greasing (HR 200 through HR 1200) • Accumulator reduces stress on hydraulic components (HR 75 and larger) • Durable housing incorporating heavy-duty rock claw (Hardox) • Dual retainer bars extend retainer and tool life • Long-stroke maximizes energy and minimizes recoil • Heat-treated tool for longer life The large, medium, small and mini-size Hy-Ram models are available in 12 different models ranging from working weights of 265 to 8,375 lbs. (120 to 3,799 kg) and tool diameters of 1.77 to 6.88 in. (4.5 to 17 cm). For more information, call 216/431-2600 or visit www.AlliedCP.com.

Indeco Indeco North America’s line of HP Series breakers has expanded to include the HP 25000. This breaker brings power and performance to rock breaking applications where hydraulic hammers previously could not be considered. Prior to the HP 25000, the largest production breakers were in the 16000 ft./lb. class. If the application called for a larger hammer, blasting was required. To meet the increasing demand for a larger sized production breaker, Indeco designed and engineered a solution by producing the HP 25000. At 10 ft. 10 in. (3.3 m) tall, the HP 25000 has an operating weight of 24,370 lbs. (11,054 kg) and an MBMB ft./lb. class rating of 25000. It can handle tools with diameters more than 10 in. (25.4 cm) and fits excavators weighing from 135,000 to 330,000 lbs. (61,235 to 149,685 kg). A hydraulic flow of 110 to 137 gpm (416 to 519 Lpm) and up to 2600 psi provide high impact strikes ranging from 240 to 460 blows per minute. The HP 25000 is not only powerful, but efficient, boasting Indeco’s intelligent variable speed and power system, which senses the hardness of the material being broken and automatically adjusts the force per blow for optimal hydraulic efficiency. The breaker’s mounting bracket is compatible with the Indeco HP 16000’s, enabling the same carrier to accept two distinct breakers with minimal downtime. For more information, call 1-800-5-HAMMER or visit www.indeco-breakers.com.

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • July 7, 2010 • Page 81

Page 82 • July 7, 2010 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

Grapples and Shears Atlas Copco With the addition of six models, Atlas Copco’s MG MultiGrapple line now serves the entire carrier range from 1,400 to 160,000 lbs. (635 to 72,574 kg). The M u l t i G r a p p l e ’s robust design also is maintenance friendly, ensuring productivity on the job site. Designed for sorting and loading demolished material, the MultiGrapple line also is suitable for demolishing light buildings such as masonry and wooden structures. All major components on the MultiGrapple line are made of carbon steel to withstand tough conditions. The standard 360-degree hydraulic rotary drive allows the MultiGrapple to be positioned quickly and accurately, and the generous dimensions of the hydraulic cylinders mean short cycle times and high closing forces. All of the hydraulic components of the MG line — cylinders, hoses and rotary motors — are positioned for protection, reducing wear and lowering maintenance costs, according to the manufacturer. The MG series grapple jaws are mounted on the housing via four large bearing points, which are designed to withstand high loads. The grapple jaws are equipped with curved steel plates that have slots to improve sight lines for the carrier operator and to facilitate material sorting by grade. The blades can be reversed and replaced with ease to minimize service costs and downtime. The high capacity of the grapple ensures rapid progress, and the optimum opening angle of 90 degrees results in a perfect ratio of force and filling content. “The addition of these six MultiGrapple models allows Atlas Copco to serve the entire carrier range from mini and compact excavators with the MG 100, MG 200, MG 300 and MG 400 models, all the way up to 80-ton excavators with the high capacity MG 5000,” said Jeff Malarik, product manager, hydraulic attachments. “The MG 2100 closes the gap between the existing MG 1800 and the MG 2700 and is designed for carriers weighing between 25 and 35 tons. There is now an Atlas Copco MultiGrapple model to serve demolition, loading or sorting jobs, large or small.” For more information, visit www.atlascopco.us.

Builtrite Several key changes have been made to the fourtine, orange peel grapple line-up. These changes are being implemented to improve overall performance and durability, according to the manufacturer.

These changes include: • Upper head and connecting link have been re-designed, allowing the hoses to be re-routed to come over the top of the material handler jib, allowing for a cleaner hose joint and less likelihood of hoses becoming torn off in scrap handling applications. • Bolt-on cylinder covers are now standard on all models, 1/2 yd. and larger. The covers and bolt-heads are recessed to prevent them from getting caught on materials. • Bolt-on access plates on the sides of the tines prevent materials from entering, yet allowing easy access for servicing when required. • High torque, heavy duty rotation motors do not require a case drain line. Internal tooth, rotation bearing allows motor to be mounted inside the rotation head to ensure maximum protection. One yd. and larger models use dual rotation motors. All grapples still come with AR 500, abrasion resistant steel on the tine tips, use hardened and oversized pins and bushings. The tines employ a boxed design for maximum strength and all come with a magnet hook in the bottom center of the grapple. For more information, call 218/834-5555 or visit www.builtritehandlers.com.

Genesis Attachments Genesis Attachments has broadened its product offering to the scrap industry with the introduction of a full line of orange peel-type scrap grapples. Genesis scrap grapples (GSG) are available in four models ranging in capacity from .75 to 1.5 cu. yd. (.6 to 1.3 cu m). Additional features include heavy-duty 4-in. (10 cm) bore hydraulic cylinders with 2.5 in. (6.3 cm) rods for powerful closing and fast opening; 360 degree continuous rotation — with high-torque rotation motor — for material access and placement; and high-strength, abrasion-resistant steel construction for long life and optimum durability. According to David Palvere, director of business development, the new grapples are a perfect complement to its XP Series mobile shears, a mainstay in many scrap yards. “The scrap grapple line is designed with the same focus on performance as our shears and, for that matter, every attachment that leaves here,” he said. “We understand the demands scrap recyclers place on their equipment and we’ve been meeting those needs for better than a decade now. We feel the GSG line will help recyclers in the best way possible: by quickly, efficiently and reliably getting material to a place where it can make them money.” The GSG line also features heavy-duty cylinder guards to reduce the risk of cylinder damage and contamination from debris; replaceable, weld-on, abrasion-resistant AR-40 steel

tine tips; and large-diameter, induction-hardened chrome pins and bushings for added durability. For more information, call 715/395-5252 or visit www.genesisattachments.com.

Toro

The Toro grapple rake attachment, for use with Toro Dingo compact utility loaders, is ideal for picking up and removing trees, bushes, roots and rocks — as well as demolition and construction debris. “The grapple rake attachment is the perfect solution for contractors who require a tool that is able to lift, place, and remove objects that are too heavy for hand labor,” said Greg Lawrence, marketing product manager for Toro’s Dingo product line. “And contractors can use this attachment to rake and dig in a multitude of ground conditions.” The Toro grapple rake attachment is 34.5 in. (87.6 cm) wide, weighs 270 lbs. (122.5 kg) and includes two hydraulic cylinders. Its compact design allows operators to fit through gates and narrow access openings to pick up materials. According to Lawrence, the grapple rake attachment is meant to be used in a rugged fashion because it provides enhanced power for clamping and holding. Its clamping force from tip to tip is 3,000 lbs. (1,361 kg), and its tines are strong enough to dig up roots and rocks. “The thick AR400 teeth of the grapple are nearly four times stronger than regular steel and almost three times as hard — making it one of the strongest and most durable grapples on the market,” said Lawrence. The grapple rake operates much like a bucket when used with the Toro Dingo loader, he explained. Operators can raise and lower it, as well as roll it over and back-rake material away from buildings and fence lines. The grapple rake also will till and comb the soil, push objects, and remove items from the ground without picking up topsoil. “This attachment is ideal for any contractor who needs to gather and move piles of brush, storm debris, or construction materials,” said Lawrence. “It’s also a handy tool for stacking rocks and timber and handling other heavy loads.” The grapple rake is one of more than 35 attachments that make the Toro Dingo system versatile enough to meet the needs of virtually any contractor. For more information, call 800-Dig-Toro or visit www.toro.com/dingo.

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • July 7, 2010 • Page 83

We’ve become attached to your machines. Sandvik (Rammer) G-Series hydraulic impact hammers

AR Series™ hydraulic impact hammers

Sandvik (Rammer) E-Series hydraulic impact hammers

Pedestal Breaker System™ stationary boom systems

Ho-Pac ® vibratory compactor/drivers

Sandvik (Rammer) S-Series hydraulic impact hammers

Contractor’s Mechanical Grapple material and waste handling systems

Where can you go to get high performance boom-mounted attachments?

And, now Allied adds to that great family background with the Sandvik (Rammer) and AR Series™ hammers. Allied’s attachments don’t take a back seat to any competitor. In particular, our Sandvik (Rammer) product features a long-stroke design, all oil operation and ProControl. All of our high performance boom-mounted attachments are supported by the most respected parts and service organization in North America. Customer satisfaction is job one at Allied. Great products supported by people who know the industry and its customers. To put a high performance Allied attachment on your machine, call 1-800-321-1046 for the name of the Allied Distributor nearest you. We’ve become attached to your machines.

Allied Construction Products, LLC

For over 65 years, we’ve developed many attachments that are legendary in the construction and demolition industries that demand high performance. Names like Ho-Ram, Hy-Ram®, Rammer, Ho-Pac® and Pedestal Breaker System™ are names that equal: UÊSimple, proven design (Our attachments have high resale or trade-in value) U Reliable performance (If you purchased an Allied attachment, you’re probably still using it) U Superior productivity (Compare AEM– formerly CIMA– ratings, our attachments get the job done faster)

E & SW E RG

L SA

ES &

953 Bethlehem Pike Montgomeryville, PA 18936 215/699-5871 New Castle, DE 302/652-3028 Uwchlan, PA 610/458-7054

IN C.

GE O

E, SERVIC

7155 Big Tree Road Pavilion, NY 14525 585/584-3425 Fax: 515/584-8853 www.georgeandswede.com

121 Karner Road Albany, NY 12205-5501 518/456-1445 Fax: 518/456-8600

Page 84 • July 7, 2010 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • July 7, 2010 • Page 85

YOU DON’T HAVE TO DIG REAL DEEP...TO DIG REAL DEEP You don’t have to have real deep pockets to invest in a LiuGong. LiuGong hydraulic excavators are designed and built to compete value-wise, both in the showroom and out on your next job. With lower ownership and operating costs, you’ll be able to break out of your costly earthmoving routine and make some money with a LiuGong. From a mini-excavator for your next landscaping job to a full-sized machine for some major pipeline chores, check one out at your LiuGong dealer today.

Demo one today. liugongna.com 281-579-8882

DEALER INQUIRIES WELCOME

LiuGong is a fifty-plus-year-old construction equipment manufacturer with a huge range of products for the North American quarry, construction, recycling, timber, landscaping, utility and other markets – WHEEL LOADERS. HYDRAULIC EXCAVATORS. BACKHOE-LOADERS. SKID-STEER LOADERS – SOIL COMPACTORS. They are the only such manufacturer to receive the coveted National Quality Award of China and are ISO9001 and ISO14001 certified. Truly a top-shelf, world-class organization.

Page 86 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 87

Performance

T h e

N e x t

G e n e r a t i o n

o f

A r t i c u l a t e d

D u m p

T r u c k s

The DOOSAN MOXY MT41, through a combination of the outstanding engine rating and total production capacity per hour, achieves a superior level of productivity with reduced owning and operating (O&O) costs for the contractor.

2 9 0 5 S h a w n e e I n d u s t r i a l Wa y • S u w a n e e , G A 3 0 0 2 4 •

S e e U s O n T h e W e b w w w . d o o s a n m o x y. c o m / d m a l /

Highway Equipment Company

Link-Belt Mid Atlantic

Zelienople, PA 16063 724/452-7800 McKean, PA 16426 814/476-7755 Dubois, PA 15801 814/371-3600

4450 Paxton St. Suite A Harrisburg, PA 17111 717/558-8505 800/342-3241 Fax: 717/558-8480

Doosan Moxy America

Page 88 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SANY America Inc. Hosts Celebration for Construction of First U.S. Facility

CONNECTICUT AL PRESTON’S GARAGE 810 Howe Ave Shelton, 06484 203/924-1747 PENNSYLVANIA EAGLE POWER & EQUIPMENT CORP. 953 Bethlehem Pike PO Box 425 Montgomeryville, 18936 215/699-5871 Uwchlan 610/458-7054

All SANY America employees were invited to come out to the construction site to see the progress and mark this special occasion.

SANY America Inc. held a ceremony to mark the start of front façade, as well as the eastern wall of the facility, will be construction on the site of what will become the company’s constructed with glass giving the facility a very distinctive first North American manufacturing facility and corporate and sleek appearance. There will be a total of 360,000 sq. ft. headquarters in Peachtree City, Ga. The booms of SANY’s under roof and the new facility will reach almost 50 ft. in concrete pump trucks filled the sky as the company cele- height. brated with the official construction commencement cereThe office portion of the building will be arranged on mony. All SANY America three levels with each floor employees were invited to containing 60,000 sq. ft. of come out to the construction space. The building will house site to see the progress and all members of the company’s mark this special occasion. corporate staff, engineering, “The new building represales and marketing, research sents a significant investment and development, in addition by SANY Group,” said Jack to manufacturing and wareTang, president of SANY house employees. It also will America at the construction serve as the North American commencement ceremony. “It distribution center for both finwill ensure that we continue ished goods and service parts, our progress in recruiting some plus it will have both outdoor of the best engineers in the display and storage areas for world, and will provide them finished machine inventory. In with an environment that will addition to the usual employee allow them to push the boundamenities there will be outdoor aries of innovation and quality picnic and activity areas on the in our brand of construction Mike Colapinto (L), construction manager, and attractive landscaped grounds equipment.” Jack Tang, president, both of SANY America, at the of the facility, designed to SANY’s new facility is site of the new North American facility. accommodate up to 500 being constructed on a 228 employees. acre site in Peachtree City, Ga., Construction on this first and will be focused on the phase of SANY America’s research and development, sales and marketing and manu- North American Headquarters has a projected cost in excess facture and assembly of lattice boom crawler cranes, rough of $60 million dollars. Currently, 115 are employed at terrain cranes, truck mounted concrete pumps, hydraulic SANY America, with plans to grow to 300 by the end of excavators, motorgraders, reach stackers, container handlers 2012. The property itself provides up to 1.2 million sq. ft. of and rotary drill rigs. Construction of the new facility is buildable area allowing SANY America to continue to grow planned to be completed in approximately 12 to 14 months, and develop with phases II, III and IV. with product production expected to begin soon thereafter. “It is an exciting time for our customers and the entire Perkins and Will, an internationally recognized architec- team at SANY America. It will be an impressive site,” said tural design firm, created an innovative, modern design for Kyle Nape, vice president of global sales and marketing. SANY’s new facility referred to as “The Wave.” The entire For more information, visit www.sanyamerica.com.

GROFF TRACTOR & EQUIPMENT INC Mechanicsburg 717/766-7671 Ephrata 717/738-0220 State College 814/353-8400 Valencia 724/898-1535 New Stanton 724/755-0124 MEDICO INDUSTRIES, INC. 1500 Highway 315 Wilkes-Barre 18711 800/633-0027 Route 611 at Shafers School House Rd. Stroud Township 18360 570/420-0877 MARYLAND FOLCOMER EQUIPMENT CORP 629 S. Phila. Blvd Box 340 Aberdeen 410/575-6580 Upper Marlboro 301/627-3938 Baltimore 410/247-7454 Frederick 301/682-4441

NEW YORK ALL ISLAND EQUIPMENT 39 Jersey Street West Babylon 11704 631/643-2605 631/643-4060 www.allisland equipment.com TRACEY ROAD EQUIPMENT, INC. 6803 Manlius Center Road PO Box 489 East Syracuse, 13057 315/437-1471 800/872-2390 1523 Route 11 North Kirkwood, NY 13795 607/775-5010 800/370-9488 607/775-5104 - fax 300 Middle Road Henrietta, NY 14467 585-334-5120 866-950-6210 585-334-5127 – fax Adams Center 315/788-0200 888/335-0200 315/788-3006 - fax Albany 518/438-1100 800/692-9669 518/438-4430 - fax

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 89

POWERFUL SOLUTIONS

act your full service dealer for more information

DELAWARE FOLCOMER EQUIPMENT CORP. 12420 Sussex Highway Greenwood, 19950 800/756-9433 EAGLE POWER AND EQUIPMENT 2211 DuPont Highway (Rt.13) New Castle, 19720 302/652-3028

VIRGINIA WHITE OAK EQUIPMENT, INC. Ashland 804/798-9281 Fredericksburg 540/373-7755 Chesapeake 757/543-2273 Manassas 703/330-1333

Takeuchi understands the needs of the industry and responds with solutions. Track loaders feature high sprocket double reduction planetary reduction final drives which provide the most efficient use of power for more traction and digging force. Wheel loaders feature pushbutton 100% front and rear axle differential lock which provides immediate traction for superior digging and lifting power. Excavators feature pressure compensating piston pumps which provide smooth multi-function operation with unmatched breakk out force and control. Driven to provide maximum functionality and performance. Try a Takeuchi and feel the power ®

The Power of Product and Support www.takeuchi-us.com

Page 90 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 91

CHESAPEAKE SUPPLY & EQUIPMENT CO. 8366 Washington Blvd. Savage, MD 20763 410/792-4750 800/483-0885 Fax: 410/792-2854 12915 South Dupont Highway Felton, DE 19943 302/284-1000 Fax: 302/284-2200 www.equipmentbychesapeake.com

SMITH TRACTOR & EQUIPMENT INC. 15 Hillcrest Avenue Washington, NJ 07882 908/689-7900 Fax: 908/689-8942

ASPHALT CARE EQUIPMENT & SUPPLIES 2765 Galloway Road Bensalem PA 19020 215/639-9800 1-800/223-1202 Fax: 215/639-9802 www.asphaltcare.com

POWERCO, INC. 370 Route 173 P.O.Box 4995 Clinton, NJ 08809 908/735-2149 800/232-7232 7247 Penn Drive Allentown, PA 18106 800/360-1128 610/395-3775

GEORGE & SWEDE 7155 Big Tree Road Pavilion, NY 14525 800/724-8722 Fax: 585/584-8853 www.georgeandswede.com

PITTSFIELD LAWN & TRACTOR 1548 W. Housatonic St. Pittsfield, MA 01201 www.plt.com 413/443-2623 Fax: 413/499-0023

E.W. SLEEPER COMPANY, INC. 391 Loudon Road Concord, NH 03302 603/225-3361 800/358-6007 Fax: 603/225-4918 www.ewsleeper.com

G & H SERVICE, INC. Route 206 North, 121 Water St. Newton, NJ 07860 973/383-3370 Fax: 973/383-5756 Toll Free: 800/545-1278 www.ghserviceonline.com

Page 92 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

All New in Box CALL Toll Free

800-523-2200 Ext. 197 (3) Caterpillar Earthmovers, D9T, D5M and 315C, 1:87 Scale ................................................................................$$75

Set of three Mack Granite Dump Trucks, 1:64 Scale ........$125

Allis-Chalmers HD21 Dozer/Ripper, 1:50 Scale ..........$$80 Bantam C-35 Crawler Backhoe, 1:50 Scale ................$$65 Bantam C-35 Crawler Shovel, 1:50 scale ....................$$65 Bantam C-35 Dragline, 1:50 Scale ..............................$$65 Bobcat A300 Wheel Loader, 1:25 Scale ......................$$40 Bobcat M610 Golden 50th Anniversar y Skid Steer Loader ..........................................................................$$50 Bobcat S175 Skid Steer Loader, 1:50 Scale ................$$18 Bobcat Tractor/Trailer Set, 1:50 Scale ........................$$80 Caterpillar V intage Twenty Tractor w/metal tracks, 1:16 Scale ............................................................................$$60 Caterpillar No. 12 Motor Grader, 1:87 Scale ..............$$25 Caterpillar AP655D Paver, 1:50 Scale ........................$$55 Caterpillar CB-534D XW Asphalt Compactor, 1:50 Scale .. ....................................................................................$$40 Caterpillar D6K XL Track Type Tractor, 1:50 Scale ......$$45 Caterpillar D7E Track Type Tractor, 1:50 Scale ..........$$60 Caterpillar D8R Track Type Tractor, 1:50 Scale ..........$$45 Caterpillar D10T Track Type Tractor, 1:50 Scale ........$$75 Caterpillar D11R Track Type Tractor, 1:50 Scale ........$$45 Caterpillar D11T Track Type Tractor, 1:50 Scale ........$$70 Caterpillar 140H Motor Grader w/ripper & scarifier, 1:50 Scale ............................................................................$$40 Caterpillar 140M Motor Grader, 1:50 Scale ................$$60 Caterpillar 226B2 Skid Steer Loader w/tools, 1:32 Scale.. ....................................................................................$$30

Caterpillar D10T Track Type Tractor, 1:50 Scale ............$75

Caterpillar 247B2 Multi-Ter rain Loader, 1:32 Scale....$$30 Caterpillar 272C Skid Steer Loader, 1:32 Scale ..........$$30 Caterpillar 302.5 Mini-Excavator, 1:32 Scale ..............$$35 Caterpillar 323D L Excavator, 1:50 Scale ......................$$50 Caterpillar 365C L Front Shovel, 1:50 w/metal tracks ..$$70 Caterpillar 420E Backhoe/Loader, 1:50 Scale ............$$45 Caterpillar 432E Side Shift Backhoe Loader, 1:50 Scale .. ....................................................................................$$45 Caterpillar 511OB Excavator, 1:50 Scale ....................$$75 Caterpillar 611 Motor Scraper in display case, 1:64 Scale ............................................................................$$10 Caterpillar 623G Elevating Motor Scraper, 1:50 Scale$$35 Caterpillar 725D Ar ticulated Truck, 1:50 Scale ..........$$30 Caterpillar 775E Off-Highway Truck in display case, 1:64 Scale ............................................................................$$15 Caterpillar 777D Off-Highway Truck, 1:50 Scale ........$$40 Caterpillar 825 Soil Compactor, 1:50 Scale ................$$35 Caterpillar 924 G Versalink Wheel Loader: 1:50 Scale .... ....................................................................................$$35 Caterpillar 963D Track Loader, 1:50 Scale ....................$$45 Caterpillar 966A Wheel Loader, 1:50 Scale ................$ $50 Caterpillar 977 Traxcavator, 1:50 Scale ......................$$30 Caterpillar 988H Wheel Loader, 1:64 Scale ................$$30 Caterpillar 992 Wheel Loader, 1:50 Scale ..................$$50 Caterpillar 994F Wheel Loader, 1:50 Scale ................$$95 Gradall XL4300 Rubber Tired Excavator, 1:32 Scale ..$$75 Hitachi Zaxis 450LC Excavator, 1:50 Scale..................$$45 International 175 Crawler Loader w/Multi-Purpose Bucket, 1:50 Scale........................................................$$50 Inter national TD-15 Dozer, 1:87 Scale ........................$$45 International TD-24 Militar y Dozer, 1:50 Scale ..........$$50 Inter national TD-24 Ag/Crawler, 1:50 Scale ................$$40 Inter national TD-25 Dozer, 1:87 Scale ........................$$45 JCB 3CX Backhoe Loader, 1:50 Scale ..........................$$50 JCB 456 ZX Wheel Loader, 1:50 Scale ........................$$70 JCB V ibr omax VM 115 Soil Compactor, 1:50 Scale ....$$45 John Deer e MC Crawler Dozer, 1:16 scale ..................$$75 John Deer e MT Gas Farm Tractor, 1:16 Scale ............$$50 John Deer e 320 Skid Steer Loader, 1:16 Scale ..........$$24 Komatsu 960E Mining Truck, 1:50 Scale ..................$$275 Komatsu PC300LC-8 Excavator, 1:50 Scale ................$$70

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Komatsu WA500-6 Wheel Loader, 1:50 Scale ............$$60 Komatsu D51 EX Dozer, 1:50 Scale..............................$$60 Komatsu D51 PX Dozer, 1:50 Scale ............................$$55 Komatsu D375 Dozer, 1:50 Scale ................................$$75 Komatsu GD655 Motor Grader, 1:50 Scale ..................$$60 Komatsu WB146 Backhoe Loader w/tools, 1:50 Scale$$45 Komatsu Mack Granite MP w/Talber t Lowboy Trailer, 1:50 Scale ....................................................................$$80 LeTourneau Super C Scraper w/Cab, 1:50 Scale ........$$80 Link-Belt 210 X2 Excavator, 1:40 Scale ......................$$65 Nor thwest 25-D Backhoe, 1:50 Scale ........................$$100 Northwest 25-D Shovel, 1:50 Scale ..........................$$100 Oshkosh Fr ont Dischar ge Mixer Truck, 1:34 scale ......$$70 Volvo G970 Motor Grader, 1:50 Scale..........................$$70 Volvo SD-122 Soil Compactor, 1:72 Scale ..................$$40 Volvo A25C Articulated Truck, 1:50 Scale....................$$30 Volvo BL71 Backhoe Loader, 1:50 Scale ....................$$45 Volvo EC240B Excavator, 1:50 Scale............................$$45 Volvo EC280 Excavator, 1:50 Scale..............................$$24 Volvo FH12 Tractor/Trailer w/Volvo L150C, 1:50 Scale...... ....................................................................................$$60 Volvo L90E Wheel Loader, 1:50 Scale ........................$$70 Volvo L60E Wheel Loader w/Attachments, 1:50 Scale$$65 Volvo L150C Wheel Loader, 1:50 Scale ......................$$30 Volvo L350F Wheel Loader, 1:50 Scale ......................$$80

VINTAGE SPECIALS

Bobcat 225 Mini-Excavator, 1:25 Scale ..................$$42.50 Caterpillar 825-B Landfill Compactor, 1:50 Scale ......$$15 Caterpillar 611 Scraper, 1:64 Scale ............................$$15 Caterpillar D25D Articulated Truck, 1:64 Scale......$$12.00 Conexpo 2005 Con/Agg, 1:50 Scale ........................$$42.50 Hitachi Crawler Crane, 1:96 Scale ..............................$$24 Inter national TD20E Dozer, 1:64 Scale ........................$$20 JCB 435 Compact Wheel Loader, 1:50 Scale ..............$$15 Melr oe Bobcat M200 Skid Steer Loader, No Box, 1:25 Scale ............................................................................$$29 Michigan L320 Wheel Loader, 1:50 Scale ..................$$25 Volvo A25 Articulated Truck, 1:50 Scale......................$$15 Yanmar B37 Mini-Excavator, 1:32 Scale......................$$15

Shipping and Handling Additional

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 93

LIEBHERR EQUIPMENT SOURCE 10119 Residency Rd. Manassas, VA 20110 703-392-0111 Fax: 703-331-5604

LIEBHERR EQUIPMENT SOURCE 6940 O’Connor Drive Hanover, MD 21076 410-379-3994 Fax: 410-379-3998

CONTRACTORS SALES COMPANY, INC. 121 Kramer Rd. Albany, NY 12205 518-456-1445 Fax: 518-456-8600

LORUSSO HEAVY EQUIPMENT, LLC www.lhequip.com 160 W. Elm St. Walpole, MA 02801 508-660-7600 Fax: 508-660-7614 EAGLE POWER & EQUIPMENT CORP. 953 Bethlehem Pike Montgomeryville, PA 18936 215-699-5871 Fax: 215-699-6416 2211 Dupont Highway New Castle, DE 19720 302-652-3028 Fax: 302-652-7540 55 Senn Drive Uwchlan, PA 19480 610-458-7054 Fax: 610-458-7094

Page 94 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

UPCOMING SPECIAL SECTIONS ISSUE

Backhoes & Attachments Ad Closing Date Publishing Date

ISSUE

Off-Road Trucks Ad Closing Date Publishing Date

ISSUE

20 22 24

September 20, 2010 September 29, 2010

Trailers Ad Closing Date Publishing Date

ISSUE

August 23, 2010 September 1, 2010

Mini & Compact Equipment Ad Closing Date Publishing Date

ISSUE

July 26, 2010 August 4, 2010

October 18, 2010 October 27, 2010

Motorgraders Ad Closing Date Publishing Date

November 15, 2010 November 24, 2010

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 95

Elliott & Frantz 450 E Church Road King of Prussia, PA 19406 610/279-5200 6680 Allentown Blvd. Harrisburg, PA 17112 717/652-5430 10421 Guilford Road Jessup, MD 20794 410/792-9134 105 Oakridge Place Hagerstown, MD 21740

A HIGH-YIELD INVESTMENT

301/733-8100

Rte 13, PO Box 368 Delmar, DE 19940 302/846-3033 VA: 1-800-220-3015

TOOLS FOR EARTHMOVING

American Custom

CRAWLER & WHEELED EXCAVATORS

Hydraulics Inc. 33 Roosevelt Avenue Belleville, NJ 07109 973/751-1440 Fax: 973/759-6868 Cell: 201/805-9711

Increasing Increasing your your net net worth has never been been easier easier thanks to TEREX tailswing excavators. Designed to TEREXconventional conventionaland andzero zero tailswing excavators. Designed make youyou more money thanthan any other leading brand,brand, our comto make more money any other leading our pact powerhouses set the standard for productivity, versatility compact powerhouses set the standard for productivity, versaand Standard hydraulics offeroffer three connections for tility reliability. and reliability. Standard hydraulics three connections immediate, dual reacting capabilities. for immediate, dual reacting capabilities.AAquick quick coupler coupler comes

standard standard for for fast fast and and easy easy attachment attachment changeovers. changeovers. Meanwhile, Meanwhile, the the articulating articulating boom boom cylinder cylinder isis enclosed enclosed and and located locatedon onthe theleft leftside sideofofthe themachine machinefor forultimate ultimateprotection protection and longer wear. The result? ROI that’s anything but standard. and longer wear. The result? ROI that’s anything but standard. For products, contact (insert Dealer Formore moreinformation informationononTEREX TEREX products, contact your local Name dealer.here) today at (insert Dealer Phone here).

www.terex.com

Page 96 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Rick

Woodson

From the Bleachers The Major League All-Star game isn’t until July 13, but I can’t wait. Gotta get this off my chest. It has been bugging me for years — well, since 2003. That is, the so-called home-field advantage in the World Series decided by which league wins the All-Star Game. When it comes to ridiculous, this ranks right up there with the NFL’s former way of deciding overtime games: win the coin flip, kick a 45-yd. field goal, game over, you win. Starting this season, though, the first team to score a touchdown wins, but only a field goal gives the other team a chance to tie or win the game. It’s not a complete fix, but it’s closer. Baseball’s All-Star Game can be fun to watch, if you don’t mind staying up past your bedtime, but the bottom line is, it’s a meaningless exhibition game. And that is why some players prefer to chill out for a couple of days instead of showing up for a ho-hummer in the heat. Not only that, but what if there’s a death in a player’s family? Or, what if some all-star’s pregnant wife goes into labor July 12, he can’t play, even though his team is a serious contender to make a run at the World Series? In last year’s All-Star Game, both the American and National League teams used 17 players and eight pitchers. Each starting pitcher threw two innings and the other seven one inning each. And not one player had more than three at-bats and most of them only two. And playing four World Series games in your own back yard is riding on this? MLB commissioner Bud Selig ended the 2002 All-Star Game after 11 innings and the scored tied at 7 because both teams were out of players. That’s when it hit home that such a game was like kissing your sister, so he wanted to make future games mean something. Never mind that except for that tie in ‘02, the American League has won 11 straight AllStar Games and four of the last seven World Series. So what if the AL has only a 4-3 lead since 2002. Playing at home is huge. Just check out the standings. The only team in the AL with a decent road record is Tampa Bay, double digits above .500 and only 20-19 at home. Seven of the 14 teams are under .500 on the road. As this is written, 11 of the 16 National League teams have losing records on the road. Why is that? Travel, hotels, food, fans, the stadium, the playing field, etc., all of which can add up to form a team’s discomfort zone. Another issue: What if, say, the All-Star Game comes down to the nitty in the eighth or ninth inning and Yankees manager Joe Girardi makes some player move or call that he hopes might avoid playing four games on the West Coast if the Yankees win the AL pennant? A stretch? Sure, but certainly possible. Selig definitely needs to fix this. How about the team with the better regular season record getting the home field “advantage?” Pure and simple. The NBA is the only other major pro sports league that does so based on won-loss record. That way, a team has to earn it over the long haul, not in one game in which everybody gets to play, regardless of the score. Most of the AL players in the All-Star Game couldn’t care less whether they help the Yankees in the postseason. It wouldn’t surprise me if a player from some team with no chance to make the playoffs might strike out on purpose if it hurt the Pinstripes, or the Red Sox. Same goes for some NL player who has it in for the San Diego Padres or the Atlanta Braves. Of course, they’d never admit it. Another suggestion: Give the starters in the All-Star Game more playing time. Or, it might be more accurate to put it this way: Make them take more playing time, whether they like it or not. The fans deserve it. This year’s All-Star rosters were announced July 4 and there aren’t likely to be many, if any, surprises — except perhaps Washington Nationals rookie pitcher Stephen Strasburg. He doesn’t deserve it, but his presence would help the usually weak television ratings, at least in the one inning he would pitch.

It will be interesting to see how many players from the worst teams come up with some excuse that will keep them from playing in the AllStar Game. You know, a gigantic hangnail issue or something. Will I watch it? Some of it, maybe — well, unless there’s a John Wayne movie on the tube.

Construction Crosswords

Across

1 Construction equipment auctioneering co:____ Bros. 5 John ____ CT 332: compact track loader 8 Closes 9 Concrete component 10 Agricultural, for short 11 Erode 14 Trees 16 Divides 17 Rip off 19 ____ Barrier Lift : makers of the RigMAX 22 Atlas ___'s CC 650 CombiCutter for lightduty demo 23 Expense 25 They have added the compact 25/36 whole tree chipper to its whole tree chipping line 26 Bargain 28 Executive Committee, for short 30 ____ RP58D, compaction equipment 32 Construction equipment dealers, Ben _____ 33 Unit of energy 34 Customers 35 _____ 680 wheel loader 36 Street for short

10 13

22 24

26 28

17 19

9 11

(Rick Woodson is a regular columnist for the “Rochester Business Journal” in Rochester, N.Y., and is the author of “Words of Woodson”, a collection of sports columns, available at www.authorhouse.com and www.thegolftee.net. Woodson’s e-mail address is rwoodson@rochester.rr.com. )

33 34

Down 1 ____ RB48: mid mount broom 2 Pickup, for one

Crossword by Myles Mellor

3 Flexible pipe 4 ___ Manufacturing released the Genesis Trailer, a combination of two trailer designs 5 They just launched a new North American paver line 6 NY railway 7 Borders 12 Busy activity 13 Pipe coupling threaded at both ends 15 Pro driver

17 They provide a rolling motion 18 Slowed a vehicle 19 Makers of the WA250PZ-6 parallel tool carrier 20 ____ 65E Scarifier 21 Chicago baseball player 24 Long range, briefly 26 Bore 27 Fiat _____ FR220.2 wheel loader 29 ______ 450CT Track skid steer 31 One part of mpg

Read current and recent Construction Equipment Guide issues to find answers to several clues in Construction Crosswords. Look in every even-numbered CEG issue for new crosswords.

see page 120 for solution

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 97

Lokotrack ST Mobile Screens

Screen with confidence Lokotrack ST Series mobile screens from Metso are engineered to deliver quality and value. Our heavy-duty frames and proven components give you long life and trouble-free operation, even in the toughest screening applications. Contact your local Metso distributor today and get the confidence that goes right to your bottom line.

Lokotrack ST358

www.metso.com

14 Kendrick Road Wareham Industrial Park Wareham, MA 01576 508-291-1200 Aggregates, quarry, contractor & recycling customers in ME, NH, MA, RI & VT; Contractor & recycling customers in NY state, excluding New York City and surrounding counties

www.miltoncat.com 55 Industrial Park Drive Binghamton, NY 13904 607-772-6500 100 Quarry Drive Milford, MA 01757 508-634-3400 4610 E. Saile Drive Batavia, NY 14020 585-815-6200 294 Ainsley Drive Syracuse, NY 13210 315-476-9981 500 Commerce Drive Clifton Park, NY 12065 518-877-8000

2158 Plainfield Pike Commerce Park West#10 Cranston, RI 02920 401-946-6350 Route 2, One Cat Lane Richmond, VT 05477 802-434-4228 Exit 6 I-89 Hopkinton, NH 03229 603-746-4611 Exit 7 I-89 • Route 103 Warner, NH 03278 603-746-4671 16 Pleasant Hill Road Scarborough, ME 04070 207-883-9586 79 Robertson Boulevard Brewer, ME 04412-2246 207 -989-1890

US Rt. 6 East Mansfield, PA 570-662-7171

Contractor & recycling customers in NJ

www.bindermachinery.com 2820 Hamilton Blvd South Plainfield, NJ 07080 908-561-9000 201 North Route 73 Winslow Township, NJ 08095 856-767-5900

Aggregates, quarry, contractor & recycling customers in CT

www.tylerequipment.com 1980 Berlin Turnpike Berlin, CT 06037 860-356-0840 800-352-4473 860-828-6727 fax

Aggregates, quarry, contractor & recycling customers in New York City and surrounding counties

www.ehrbar.com 4 Executive Plaza, Yonkers, NY 10701 914-738-5100 Long Island: 601 Coates Avenue, Holbrook, NY 11741 631-563-7600 New York City 718-626-3331

Aggregates, quarry, contractor & recycling customers in PA

www.cbconagg.com

4565 William Penn Hwy Murrysville, PA 724-327-1300

5300 Paxton St. Harrisburg, PA 717-564-2121

168 Industrial Park Rd Somerset, PA 814-445-7915

Old Town Rd. & Rte 879 Clearfield, PA 814-765-1611 11 Progress Avenue Cranberry Twp., PA 724-776-7660

2995 Stewart Drive State College, PA 814-237-8338 Rt. 54 & 1180 (Exit 5) Turbotville, PA 570-538-2551

3950 Depot Road Erie, PA 814-898-3388

Wilkes-Barre Twp Blvd. Wilkes-Barre, PA 570-822-8141

1500 S. Altamont Blvd. Frackville, PA 570-874-3560

4326 Oregon Pike Lancaster, PA 717-859-4905

145 Rose St. Indiana, PA 724-463-8743

309 Foothills Lane Mount Pleasant, PA 724-696-4080

3105 Route 219 Lantz Corners, PA 814·778-5250

590 Suscon Road Pittston, PA 570-883-1044

Page 98 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LOADED WITH

value

With TEREX, value takes many forms. Start with high quality equipment designed to improve productivity and return on investment. Add inherent product dependability and the expertise and support capabilities of TEREX and its dedicated dealer organization. Choose from the broadest, most diversified line of equipment in the industry. Then top it off with our customer friendly philosophy and you experience the TEREX value proposition.

Case 590 Super M+ Receives Engineering Excellence Nod During the BAUMA construction tradeshow held in Germany, Diesel Progress magazine honored Case Construction Equipment with an Excellence in Equipment Engineering award in the loader/backhoe category for the 590 Super M+ Series 3 loader/backhoe. “Case packs more than 50 years of engineering excellence into its backhoe design,” said Rob Marringa, marketing manager, Case Construction Equipment. Beck, vice president of construction machin“Winning the Excellence in Hermann ery systems, ZF (R), presents the Diesel Progress Equipment Engineering award to Alain de Nanteuil, Case Construction award for the 590 Super M+ Equipment. is a testament to the smart engineering in the entire loader/backhoe, garnering 47.9 percent of Case M Series 3 loader/backhoe line.” The Diesel Progress Excellence in the overall vote in that category by more Equipment Engineering Awards are intended than 9,000 readers of Diesel Progress, Diesel to recognize excellence in mobile equipment Progress International and visitors to the engineering in 13 separate categories, cover- Diesel Progress Web site. The 590 Super M+ is powered by a turing medium and heavy construction equipment (wheel loaders, backhoe loaders, bocharged Case Family IV 445TA/E3 diesel, hydraulic excavators and trucks), compact Tier III-certified engine that provides maxiequipment (compact wheel loaders, skid mum fuel efficiency and reduced emissions. steer/track loaders and mini-excavators), lift The machine also features pressure-compenequipment (telescopic handlers, cranes and sated load-sensing hydraulics to improve forklifts), road-building equipment (motor- fuel efficiency, helping move more yards per graders and compactors/rollers) and agricul- gallon of fuel, according to the manufacturer. tural equipment (tractors). In addition to the 590 Super M+, the Case The editorial board of Diesel Progress, with input from several industry suppliers, M Series 3 loader/backhoes include the identified three final candidates in each of 580M, 580 Super M, 580 Super M+ and 590 several machine segments, including the Super M. For more information, visit loader/backhoe category. The Case 590 Super M+ was selected as the best www.casece.com.

CONTRACTORS SALES, INC. PO Box 12010 Albany, NY 12212 518-456-1445

During the BAUMA construction tradeshow held in Germany, Diesel Progress magazine honored Case Construction Equipment with an Excellence in Equipment Engineering award in the loader/backhoe category for the 590 Super M+ Series 3 loader/backhoe.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 99

* 20332 Leitersburg Pike Hagerstown, MD 21742 301/733-7414 Fax: 301/797-3126 1109 Middle River Road Baltimore MD 410/780-4000

GEORGE & SWEDE SALES & SERVICE INC. Pavilion, NY 14525 800/724-8722

PO 12010 121 Karner Road Albany NY 12212 518/456-1445 Fax: 518/456-8600

Ashland, VA 800-552-3837 Chesapeake, VA 800-342-3248 Harrisburg, PA 800-342-3241 www.link-beltmidatlantic.com

LBX Company, Makers of Link-Belt excavators

Page 100 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Intercounty Paving Reaches Milestone During JFK Job JFK from page 30

cost, just to make sure the new machines were up and running without any glitches. Once we had two weeks’ worth of service on the new machines we were confident we could release the loaner.” Intercounty also used its Caterpillar M322D excavator for the installation of electrical items, for which the company also is subcontractor. The company also rented a Caterpillar D6 dozer from Foley for fine grading work. Foley Paving Specialist Walt Suk was impressed with the work Intercounty is doing at JFK. “We visited the runway and I could not believe what a tremendous undertaking the project is. It is the most extensive and complete construction site that I have ever seen. The logistics and time constraints that they are operating under are so impressive, and they are even ahead of schedule, which is another testament to their work ethic,” he said. Concrete Conversion Cement for the runway was supplied by the Lehigh Cement Company, headquartered in Irving, Texas. “We are supplying IS cement from our Cementon [Catskill], N.Y., facility,” said Gardner Kavanagh, sales manager of Lehigh Cement. “IS cement is an interground product consisting of Portland Cement and Ground Granulated Blast Furnace Slag [GGBFS]. The specification from the Port Authority called for a minimum of 40 percent GGBFS in the concrete mix. The Lehigh product meets this requirement and makes it easier on the plant personnel when producing concrete, being that it is one all inclusive product.” “IS cement being used on this

The reconstructed Bay Runway was commissioned June 28.

project helped on this job due to a tight plant configuration and made it easier on Tutor Perini dealing with one raw material rather than two. This allowed them to use all of their silo space for the interground product rather than maintaining two separate silos to supply the job with the individual products,” he added. Conversion to a concrete runway is expected to increase its working life to more than 40 years as opposed to the eight years expected of an asphalt runway. The scope of the overall job is further demonstrated by the fact it entails removing 100,000 cu. yds. (76,455 cu m) of material from runway, shoulders and associated areas before reconstruction can begin. Tutor Perini used a GOMACO GP-4000, equipped with a stringless control system, will slipform the new runway in 25 ft. (7.6 m) wide paving passes, 18 in. thick. The GOMACO GP-4000, with the new G22 digital controller, is a preferred paver for airport projects around the world. The two-track or four-track pavers, capable of paving passes up to 50 ft. (15.2 m) wide, has worked on Sky Harbor International Airport in Phoenix, Ariz., Hartsfield-Jackson Atlanta International Airport in Atlanta, Ga.; Moscow Airport in Moscow, Russia; Orlando International Airport in Orlando, Fla.; Perm Airport in Perm, Russia; the Salt Lake City International Airport in

Intercounty fine grades the shoulder and taxiway areas using Topcon Millimeter GPS grade control on a Komatsu GD 655.

Salt Lake City, Utah; and other airports across the United States and the entire world. Eye in the Sky Intercounty used a combination laser-Global Navigation Satellite System (GNSS) on multiple Roadtec RX-900 cold planers. The system is unique in that it combines laser and GPS. A transmitter integrated into the system sends out a wall of laser light 33 ft. (10 m) tall and up to 2,000 ft. (610 m) in diameter. Contractors may link up to four transmitters for a total reach of 8,000 horizontal ft. (2,438 m) and 132 vertical ft. (40 m), providing the capability of operating a

number of machines equipped to accept signals. While the GNSS component plots the machine’s location, the laser component guides the grader to position and elevates the blade precisely. Setting up the system was not without difficulty. Tutor Perini surveyors set up the job site for machine control using Intercounty’s GR-3 base station. However, GR-3’s 1-watt UHF radio left “dead zones” at both ends of the runway, which is typical in radio signal-dense airfield environments. A 35-watt external radio

was therefore set up, allowing the base station to be positioned along the runway near the middle of the job site, providing full radio coverage without interference from voice traffic. Also complicating matters were several unseasonably large snowfalls during February. Control points had to be cleared and drifting snow routinely refilled control see JFK page 118

4L Equipment Leasing’s fleet of 25 asphalt live bottoms are lined up ready to deliver to the paver.

The centerline of the runway was paved with eight 25 ft. (7.6 m) lanes of concrete 18-in. (45.7 cm) thick for a total width of 200 ft. (61 m).

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 101

Compact size, big possibilities.

If you’re looking for a great value in a lightweight, agile, and powerful skid steer, look no further. Like their big brother, Deere 313 and 315 Skid Steers deliver best-in-class stability, visibility, and serviceability. These easy-to-transport dynamos are perfect in tight spaces. Equip one with any of the many Worksite Pro™ attachments, and watch productivity take off. Give us a call and we’ll set up a demo, pronto! www.johndeere.com

DOYLE EQUIPMENT CO. 20400 Rte 19 North Cranberry Twp, PA 16066 724/776-3636 Rte 66 South Delmont, PA 15626 724/837-4500

KS1CUFF0034N-00268028

JESCO, INC. 118 St. Nicholas Ave. South Plainfield, NJ 08070 908/753-8080 1790 Route 38 Lumberton, NJ 609/267-2020 1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080 Fax: 973/575-5553 495 Fishkill Avenue Beacon, NY 12508 845/831-1800 800/724-0725 Fax: 908/821-1671

LAPIETRA MACHINERY & EQUIPMENT 5320 Third Avenue Brooklyn, NY 11220 800/942-9950

LESLIE EQUIPMENT COMPANY

W.I.CLARK

6248 Webster Road Cowen, WV 26206 304/226-3299 w w w. l e c 1 . c o m I-64 and Airport Rd. Beaver, WV 25813 304/255-1525 Rt. 33 West Norton, WV 26285 304/636-6421

30 Barnes Industrial Park Rd. Wallingford, CT 203/265-6781 w w w. w i c l a r k . c o m Brookfield, CT 203/775-1203 Plainfield, CT 860/546-4808

Page 102 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Komatsu Launches Tier-III Certified D65-16 Crawler Dozers Komatsu America Corp.’s new line of D65-16 crawler dozers are powered with the fuel efficient 8.27 L, EPA Tier III emission certified Komatsu SAA6D114E-3 engine. These new models push with a net (ISO 9249/SAE J1349) 205 hp (153 kW) at 1,950 rpm. A standard (EX), low ground pressure (PX) and a wide (WX) track models are available, offering customers flotation and weight distribution options to best match their applications. Operating weight ranges from 43,690 to 48,940 lbs. (19,817 to 22,199 kg) depending on the version. Developed primarily for heavy dozing and finishing operations, the new model combines the SIGMADOZER blade with an automatic transmission with torque converter lock-up to achieve enhanced productivity and fuel economy. A new Komatsu 6-way Power Angle Tilt (PAT) blade also is available for all models, making it a balanced and agile tractor for light and medium dozing operations as well as providing precise grade cutting required for site prep, golf course or house pad applications, according to the manufacturer. The new dozers are equipped with the latest KOMTRAX technology, which sends machine operating information to a secure Web site utilizing wireless technology. Hour meter, location, cautions, load ratio, fuel consumption and maintenance alerts — to name a few of its features — are relayed to the web application for analysis. The KOMTRAX fleet monitoring system increases machine availability, reduces the risk of machine theft, allows for remote diagnosis by the distributor, and provides other information to drive business efficiency and productivity. Special features of these new crawler dozers include: Choice of the next generation SIGMADOZER blade for productivity and grading, or PAT blade for versatility and performance The D65EX and WX can be equipped with SIGMADOZER, providing the machine with a large blade capacity of 7.34 and 7.72 cu. yd. (5.6 and 5.9 cu m) respectively. Based on a completely new excavation theory, SIGMADOZER improves dozing performance and increases productivity by 15 percent over conventional Semi-U blades as proven on the larger D155AX-6 and D275AX-5 dozers, according to the manufacturer. The blade features a new frontal design concept adopted for digging and rolling up at the center of the blade increasing soil holding capacity while simultaneously reducing sideway spillage. It also reduces digging resistance producing a smoother flow of material enabling the dozing of larger amounts of soil with less power.

Developed primarily for heavy dozing and finishing operations, the new model combines the SIGMADOZER blade with an automatic transmission with torque converter lock-up.

APAT blade with durable box structure CFrame is optionally available for each model. The hydraulic blade tilt and angling function expands versatility and productivity in a variety of applications. The manually adjustable blade pitch further expands the versatility and productivity in many applications New automatic transmission improves fuel economy The D65-16’s have a new automatic transmission with lock up torque converter that greatly reduces fuel consumption and offers greater power train efficiency. The lockup mechanics of the torque converter automatically transfers engine power directly to the transmission, reducing fuel consumption by up to 10 percent. Because of the efficiency of the electronically controlled engine and transmission, fuel consumption is decreased while machine power is maintained. Two gearshift modes — automatic or manual — can be easily selected to fit the appropriate application: automatic for all general dozing offers the choice of four forward and reverse speeds and manual for dozing and ripping rough ground offers the choice of three forward and three reverse speeds. For operating efficiency, the automatic gearshift transmission shifts to the optimal gear range based on the working conditions and load. Two selectable working modes — E

and P — match machine performance to the application. The E Mode is chosen for all general dozing, leveling and spreading applications providing adequate speed and power while saving up to 10 percent fuel. The P Mode is chosen for slot dozing, ripping or other applications requiring higher production where engine power has priority over fuel consumption. Newly designed joystick controls for power and comfort Komatsu’s ergonomically designed palm command control system (PCCS) gives operators maximum control, offering a relaxed posture and superb fine control to minimize operator fatigue. Thumb push buttons simplify transmission gear shifting. The pilot controlled hydraulic blade and ripper control joystick offers blade and ripper fine control. Engine speed is controlled using an easy-to-operate electronic throttle control dial, which eliminates maintenance of linkage and joints. Powerful turns under various work conditions are achieved with the hydrostatic steering system (HSS), which is driven by an independent hydraulic pump and motor to transmit power to both tracks without interruption. Counter-rotation is available for minimum turning radius, providing maneuverability

New cab design creates optimal operator environment The new D65-16 crawler dozer’s comfortable working environment allows the operator to concentrate on the work at hand for increased productivity. The new larger cab is now integrated with ROPS (roll-over protection structure) and moves the standard air ride operator’s seat 3 in. higher and 4 in. closer to the blade for excellent front, side and rear visibility. The dozer’s viscous cab mounts reduce shocks and vibration even over adverse conditions and the interior cab decibel has been decreased to 75db for a quiet work environment. A new, large 7 in. color LCD monitor in the cab displays all machine information. Convenient maintenance equals reliability Knowing that maintenance is critical for successful equipment uptime, Komatsu has designed the D65-16 with easy routine maintenance in mind. Daily engine checks are grouped at the left hand side of the engine compartment. A manually reversing fan allows for quick cleaning of the radiator without leaving the cab. The D6516 also comes standard with PLUS undercarriage. This rotary bushing system doubles the undercarriage life over prior conventional systems lowering O&O costs. For more information, visit www.komatsuamerica.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 103

www.jcb.com

World’s #1

Designed And Built For You... Whatever Your Job As the number one backhoe loader manufacturer in the world today. JCB has over 60 years experience in producing the best backhoes in the industry. With a reputation built on constant innovation, our design has gone from strength to strength. So it will be no surprise to learn that one out of every three backhoe loaders sold in the world carries the JCB logo. We also offer the world’s largest range of backhoes, so whatever your needs, JCB has a backhoe loader solution to help you get the job done. Visit a JCB dealer to try the world’s #1 for yourself!

For more information on the full range of JCB construction equipment and to ﬁnd the dealer nearest you, please visit www.jcb.com

Earthborne, Inc.

35 Easton Road Warrington, PA 18976 (Philadelphia Area) 215/443-0770 Fax: 215/443-0787

Farm-Rite, Inc.

Construction Farm & Turf 122 Old Cohansey Road Shiloh, NJ 08353 800/752-6373 856/451-1368 Fax: 856/453-9480 3853 Middle Country Road Calverton, NY 11933 631/284-3127

Liftech Equipment Co. 6847 Ellicott Drive E. Syracuse, NY 13057 315/463-7333 4381 Walden Avenue Lancaster, NY 14086 716/684-9040 241 Paul Road Rochester, NY 14624 585/328-6380 2820 Curry Road Schenectady, NY 12303 518/356-5932

9 Beldon Rd. Bloomfield, CT 860/243-9723 33B Commerce Ave. S. Burlington, VT 802/864-0308

MH Equipment Co. 126 Lakeview Dr. Charleston, WV 25313 304/776-6900 Fax: 304/776-6966 jcbmhequipment.com

Stephenson Equipment, Inc.

7201 Paxton St. Harrisburg, PA 17111 800/325-6455 135 Lincoln Ave. Prospect Park, PA 19076 800/220-4033 1805 Newport Rd. Ephrata, PA 17522 800/347-6998 137 Armstrong Rd. Pittston, PA 18640

Valley Supply & Equipment Co, Inc 1109 Middle River Rd Baltimore, MD 21220 800/633-5077 Fax: 410-780-4004 20332 Leitersburg Pike Hagerstown, MD 21742 800/336-7414 Fax: 301/797-3126

8192 Euclid Court Manassas Park, VA 20111 800/300-5579 Fax: 703/331-5688

Walsh Equipment Inc.

796 Unionville Rd. Prospect, PA 16052 724/865-9221 walshequipmentinc.com

Page 104 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Leica Builder Series Offers Two Operation Options

www.terex.com

Keil Equipment Company, Inc. 2356 Route 9 Hudson, NY 12534 518/537-6221

The Leica Builder Series is designed for non-technical construction professional to easily perform positioning, layout, or dozens of other daily construction-site tasks. To facilitate data transfer, some models feature a USB port while the 500 Series also has Bluetooth functionality. The Leica Builder Series offers the choice of two operation modes. Contractors can operate in “stand-alone” mode via the on-board PowerSite construction programs with the memory capabilities to collect, store and download The new Builder models 300, 400 and 500 support a data. Or there is an applica- USB memory stick for quick and easy data transfer. tion available for contractors who prefer to use a data collector. The Builder can be coupled with the Leica DX-10 data collector and Siteforeman software. On-board PowerSite software is designed specifically for construction applications, eliminating surveying features that contractors may not need. Contractors do not require a surveying background in order to use the PowerSite software. Intended for the construction site, the Leica Builder is designed to withstand dust, water, and other environmental conditions with an IP55 rating. The entry model Leica Builder 100-Series is an electronic digital theodolite for horizontal and vertical angle measurements. Subsequent models, Leica Builder 200, 300, 400 and 500, are total stations available with reflectorless and/or prism measurement capabilities, data storage via USB memory stick and wireless communication for more useful functionality. All instruments are equipped with theft protection and support many different languages, of which three can be uploaded and switched at the push of a button. The Leica Builder is delivered packaged in a crush-proof transport case with a set of accessories for out-of-the-box use. For more information, visit www.leica-geosystems.us. The Leica Builder Series is designed for non-technical construction professional to easily perform positioning, layout, or dozens of other daily construction-site tasks.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 105

IT TAKES GROUNDBREAKING TECHNOLOGY TO BE THE BEST AT GROUNDBREAKING. The New Kubota KX71-3 Compact Excavator Breakout force: 3,285 lbs. (arm) 6,350 lbs. (bucket) The most in its class 27.5 HP Kubota diesel engine Variable displacement pumps 18" tailswing overhang Large operator space Digital diagnostics Double-opening bonnet

Abele Tractor www.abeletractor.com

Albany, NY 12205 518/438-4444 518/438-5751

Admar Supply Company, Inc. Rochester, NY 14623 585/272-9390 Vestal, NY 13850 800/836-2367 607/798-0333 www.admarsupply.com

866/390-2367

Buffalo, NY 14217 Cher ry Va l l e y Tractor 716/873-8000 www.cherryvalleytractor.com 800/353-2367

E. Syracuse, NY 13057 315/433-5000 800/293-2367

Marlton, NJ 08053 856/983-0111

Eagle Power & Equipment Company www.EaglePE.com

Montgomeryville, PA 18936 215/699-5871 Eagle, PA 19480 610/458-7054 East PBE, Inc. Newington, CT 06111 860/665-7470

Erb & Henr y Equip., Inc. Harter Equipment, Inc New Berlinville, PA 19545 Millstone Twp, NJ 08535 732/446-7600 610/367-2169 1-888-HARTER-1 F a r m-Rite Inc. Shiloh, NJ 08353 800/752-6373 856/451-1368 Calverton, NY 11933 631/284-3127

Westchester Tractor Inc.

www.messicks.com

www.wtractor.com

Abbotstown & Elizabethtown, PA 800/222-3373

Brewster, NY 10509 845/278-7766 845/278-4431

Marshall Machiner y, Inc. Pine Bush Equipment Honesdale, PA 18431 Co, Inc. 570/729-7117 www.pbeinc.com

Pine Bush, NY 12566 845/744-2006 Holmes, NY 12531 845/878-4004

www.kubota.com EVERYTHING YOU VALUE

Messick’s

Page 106 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADH Shares Family Tradition Through Four Generations

ADH Contracting Inc. offers a wide range of excavation services, including installing roads (a complete package from cutting trees to asphalt), site work and site projects, such as water treatment plants, installing septic systems, excavation for all house lots, spreading loam, and, in the wintertime, snow plowing.

By Jay Adams CEG CORRESPONDENT

For Al Hashem, the work was in his blood. His grandfather had done it, followed by his uncle and then his father. What became a way of life for them became a way of life for him, and, a decade or so ago, for his son. Hashem, owner/operator of ADH Contracting Inc. on Route 28 in Middleboro, Mass., is part of four generations of a family that move the earth in order for others to build upon it. “I am third-generation excavation. My grandfather started in the 1930s, my uncle started in the early 1960s. They were just a small operation. They did construction,” said Hashem. “My uncle took over for my grandfather, and then I got in the business, then my son, Tim Hashem, got in the business. He was the fourth generation.” All of the men in the family named their

businesses after themselves. Al’s grandfather’s first business was called Arthur W. Casey Contracting. Al’s uncle’s business is David R. Casey Contracting, which is still around today. Independence Day “I started out with an old 4500 Ford backhoe, a six-wheeler dump truck and a tag trailer,” said Hashem. “I worked out of my backyard for a couple of years. I started out small.” The Fourth of July weekend in 1987 gave Hashem his own kind of independence. When he went to help some contractors working on a job, he didn’t know it would begin a career as owner/operator of his own business, now in its 24th year. “I went into it with my uncle, worked with him for a couple of years. My uncle and I were going in two separate directions, so I branched out on my own in 1987. I decided to go back to being a mechanic, backhoe

operator, dump truck operator, with my trailer, doing side work on weekends,” he added. “I went to work in July with my backhoe, just to help this outfit doing the Stoughton, Mass., train station — putting in the new parking lot, drainage, curbing along the tracks and platforms, and handicapped accessible ramps — and I ended up being the owner/operator, on a rental basis. I went to work, and I never stopped. “Six months later, I ended up buying my second machine. It was an old International 175 shovel dozer. Then, I worked on rental, doing the site work at the water tower in Kingston, Mass.” Starting from his own backyard in Middleboro, Hashem rented different buildings to house his business in the area. He incorporated ADH Contracting in 1999. He then built his own new building on Route 28 in Middleboro in 2004. It houses a solid fleet of heavy equipment, including four Caterpillar excavators (315 to a 330), three

Caterpillar bulldozers (D4 to D8), Reed Screen All (90), two loaders (950 and 980), two dump trailers, and three 10-wheelers, among others. Beyond its continued subcontracting work, ADH continues to rent machines and operators for big and small jobs. Now Fourth Generation All this began with one backhoe at the Stoughton Train Station. “I was doing a lot of rental work [contractors rent him and the backhoe]. Big general contractor called me and said, ‘I need a backhoe on the job.’ They kept calling.” From that first train station job, Hashem started doing site work around various water towers, water treatment plants, water lines, and building foundations all over the South Shore of Massachusetts and Cape Cod, as far north as Westboro. see ADH page 108

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 107

Custom-designed – Comfort for the working man. Extra Large Cab with Plenty of Legroom Standard, Fully-Adjustable Air Ride Seat with Heat Ride Control for Reduced Material Spill CD Player with MP3 Input Large, User-Friendly 7” Color Cluster Display Excellent Visibility – 360 Degrees USB Charging Port; 12 V Power Supply Multiple Storage Compartments / Cup Holders

CONNECTICUT Kahn Tractor & Equipment, Inc. North Franklin, CT • 860.642.7596 D E L AW A R E Folcomer Equipment Corp. Greenwood, DE • 302.349.5760

M A RY L A N D Folcomer Equipment Corp. Aberdeen, MD • 410.575.6580 Baltimore, MD • 410.247.7454 Upper Marlboro, MD • 301.627.3938 Frederick, MD • 800.951.2550

NDA

3-year / 3,000-hour full machine warranty & 5-year / 10,000-hour structural warranty

Industry’s Best Total Coverage Warranty:

• • • • • • • •

COMFORT

R R A N

www.hyundaiamericas.com

MAINE Wallingford Equip. Co., Inc. Auburn, ME • 207.782.4886

NEW HAMPSHIRE Chappell Tractor East Brentwood, NH • 603.642.5666

NEW YORK George & Swede Sales & Service Pavilion, NY • 585.584.3425

TB Equipment & Rental Bangor, ME • 207.262.0014

Chappell Tractor Sales, Inc. Milford, NH • 603.673.2640

Pine Plains Tractor and Equipment Inc. Pine Plains, NY • 518.398.7107

NEW JERSEY G & H Service, Inc. Newton, NJ • 973.383.3370

P E N N S Y LV A N I A Highway Equipment Company Zelienople, PA • 724.452.7800

Page 108 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Reputation, Hard Work Contribute to Company Success ADH from page 106

Among ADH’s projects have been the excavation and site work for the large water towers in Dartmouth, Sandwich and Harwich, Mass. Soon, another Hashem was ready to join the operation, the fourth generation to do so. “I was all by myself for the first five to eight years, and then, Timmy, my son, got out of [high] school. He was looking for something to do. I was doing a bigger project in Rockland, Mass., site work for these condominiums, 96 units. Timmy came to work for me as a laborer, slowly learning to run the equipment. He stayed with me for four or five years.” In 1999, Tim Hashem, like all the other excavators in the bloodline, wanted to venture out on his own. “He wanted to branch out and go in his own direction. He took on one of the excavators with the payment, and branched out, forming T & T Excavating, also out of Middleboro. He specializes in Title Five [septic] installation and repairs,” said the proud father, who also is now Tim’s nextdoor neighbor. Many Projects to Dig With Tim by his side, Hashem worked for some three years on Willow Pond Condominiums in Rockland, Mass., followed by all the site work for the clubhouse, parking area, the green and tee areas, all the cart paths and drainage at the luxurious Atlantic Country Club in Plymouth, Mass. ADH was then hired to do similar work at LeBaron Golf Course in Lakeville, Mass., (the club house and the parking area), in addition to putting three 20,000-gal. tunnel tanks into the ground, part of a huge concrete, septic system. “There was an enormous trench shoring system that we rented from North East Shoring LLC of Millis, Mass., a great company to do business with. Dave Pateuk, the owner, has many years of experience in the excavation business himself. As a result, he is good at solving trench-shoring issues that the contractor may not know how to deal with. They helped us out tremendously. The photographs are really impressive. We are down inside the trench box, with that double-stacked box, a high-arch box system, and, in the photographs, we look like ants down there. “Since this project, we have done two or three or more tunnel tanks on different jobs,” added Hashem. It wasn’t easy; it was a challenge to be solved. “On LeBaron Golf Course, we had the property line on one side, the course on the other, and we only had a 30-foot strip of land. We had to dig the hole, 16 feet deep, a very narrow area to work. The tanks were

ADH Contracting Inc. works with Northeast Shoring LLC on tank installation at LeBaron Country Club in Lakeville, Mass.

40-feet-long by 11-feet wide, so we had to dig the hole, put the trench box in the hole, then back fill the outside of the trench box to get the crane close enough to start setting the tank. The pieces were so heavy we couldn’t get a big enough crane in there. “We used a 100-ton crane to set these structures,” he added. “It came in on flat beds, two units per truck, five units. Each unit was 11 by 11 square, 8 feet long, a square box with no ends on it. And that was just the middle section,” he recalled. From there, it was site work, roads, condo projects, site projects like Advanced Auto Parts, Rockland Trust in Abington, Mass., Bright Horizons Day Care in Foxboro, large house lots in Abington, the Fort Devens Water Treatment Pump Station (the removal of huge underground tanks), and others. “The Town of Holbrook used our work as an example of how they wanted the roads

done in their town [for a subdivision of roads at Beachtree Estates],” said Hashem. Offers Many Services ADH Contracting Inc. offers a wide range of excavation services, including installing roads (a complete package from cutting trees to asphalt), site work and site projects, such as water treatment plants, installing septic systems, excavation for all house lots, spreading loam, and, in the wintertime, snow plowing. “I’ve had a steady snow plow contract since the day I’ve been in business,” Hashem said. The company has grown beyond his own family. “Right now, I have a crew of six to eight. When things get busy, up to 10 people. Most of my guys have been with me, six, eight, 10 years,” said Hashem. “It’s more like a fami-

ly-operated business. I let the guys run their own jobs and make their own decisions to make them feel part of the team. I help them by overseeing the job.” What makes his company stand out and last? Honesty. “We basically stay in business because of our reputation. We’re not overpriced. We’re not underpriced. We adjust to the times. We’re an honest contractor. We just try to get an honest day’s pay for an honest day’s work. And we don’t add a lot of extras. When we’re finished, you will not see many extras at the end of the job,” he said. “My guys are loyal and hard working and they feel part of the team. Everybody gets along and nobody bickers. They are handpicked guys and they are very dedicated.” (Editor’s note: This article originally appeared in the New England state supplement.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 109

www.shawmutequipment.com

300 S. Randolphville Rd. at Route 287 Piscataway, NJ 08855 800/446-3362 22 Peconic Ave. Medford, NY 631/207-2900

1130 Zerega Ave Bronx, NY 718/822-1179

20 Tolland Turnpike Manchester, CT 06042 800/829-4161

Black Horse Pike Williamstown, NJ 856/875-0036

136 Eastman St. South Easton, MA 02375 877/526-9213

1440 Route 9W Marlboro, NY 12542 845/236-3000

327 King William Rd. Saint John, NB Canada E2M 7C9 888/594-8444

Philadelphia, PA 800/220-4033

Pittsburgh, PA 800/692-7600

Harrisburg, PA 800/325-6455

Syracuse, NY 800/368-6455

Lancaster, PA 877/503-4307

Albany, NY 518/357-2200

Wilkes-Barre, PA 866/667-6756

Page 110 • July 7, 2010 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide

BINDER MACHINERY 2820 Hamilton Blvd. S. Plainfield, NJ 07080

908/561-9000 201 North Route 73 Winslow Township, NJ 08095

856/767-5900 MIDLANTIC MACHINERY Route 13 N. Delmar, DE 19940

302/846-0224 CN WOOD CO., INC. 200 Merrimac Street Woburn, MA 01801

781/935-1919 Whately, MA

413/665-7009 Johnston, RI

401/942-9191 Avon, MA

Get the latest news online.

Hope is more powerful than a hurricane

Visit CEG’s Web Site at www.construction equipmentguide.com

PUMP REBUILDS AUTHORIZED OEM DEALER Hitachi Excavators Hitachi Trucks Kawasaki Gehl Euclid Talber t Pr otec Waldon Perkins Hensley

YOUR PARTS SOURCE

Bucyr us Blades Cummins Baldwin Filters Expander Systems Allied/Rammer Esco Isuzu Hino Sennebogen Moxy

ALL MAKES & MODELS OF MACHINES SAVE UP TO 60%

Dresser (new & non-OEM) Galion (new & non-OEM) Wabco Michigan Samsung IH Cat (non-OEM) Remanufactured Components

• Full-Service Hydraulic Repair • Turnkey Hydraulic Systems • Hydraulic System Integration • Professional Field Service • Full Machine Shop • Hard Chrome Plating • Large Seal Inventory

...plus many others

Visit our website: www.howelltractor.com 811 Sivert Dr. Wood Dale, IL 60191 800-866-1778 Fax: 630-595-3855

480 Blain Street Gary, IN 46406 800-852-8816 Fax: 219-977-4220

2770 May Road Peru, Ill 61354 800-342-6072 Fax: 815-224-2538

Call Ken or Marc

SELL Used Heavy Equipment Parts SAVE ALL MAKES SAVE $$$ & MODELS $$$ We BUY Heavy Equip & Salvage Machinery We

716/681-8474 Fax: 716/681-8514 4474 Walden Avenue Lancaster, NY 14086 sales@fluidpowerservice.com

ONE YEAR WARRANTY

New Aftermarket Parts

RUTLAND,VT 802-773-5926

CYLINDER REPAIR EXCHANGE

Check our inventory of machinery for sale at

www.fluidpowerservice.com

WWW.CREANEQUIPMENT.COM

This public service announcement is sponsored by Construction Equipment Guide.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 111

EMPLOYMENT OPPORTUNITY New Jersey equipment dealer is looking to hire for the following positions: Territory Sales Representatives Inside Sales/Equipment Manager Parts Counterman Service Manager/Service Writer Rental Coordinator/Rental Manager Product Support Representative We offer an excellent benefits package, including a 401K. EOE-A/A

PLEASE SEND RESUME IN STRICT CONFIDENCE TO: hr@jesco.us or Fax: 908-753-7853

on spring break. She wore them only once

Amanda Geiger bought these sunglasses

he was killed by a drunk driver.

to wear on spring break. She wore them only once Don’t Let Friends Drive Drunk. before she was killed by a sdrunk driver.

Photo by Michael Mazzeo

Friends Don’t Let Friends Drive Drunk.

Surf the Internet to the News, Equipment and all the information you need to keep up with the Construction industry @ www.constructionequipmentguide.com

HO Penn, the Caterpillar equipment dealer for lower NY and all CT, has the following exciting career opportunities available: Product Technology Solutions Manager - Poughkeepsie, NY This role is responsible for being the key contact for equipment technology solutions company-wide, maintaining a current and thorough understanding of technology solutions available in the construction equipment industry, provides training to customers on selected technology solutions, expanding growth in the paving solutions market and assists sales with identifying technologies for engine emissions retrofits. Qualifications for this position include the following: • Must be technologically advanced including a knowledge of GPS systems, lasers, sonics, and electronics as they relate to construction and industrial equipment • Must have strong analytical and diagnostic skills • Must have demonstrated equipment knowledge, especially Paving products. • Must be strategic and forward thinking • Good computer skills, strong written and verbal communication skills required • Must be able to demonstrate to customers how technology solutions can improve productivity and profitability Service Manager - Holtsville, NY Reporting to the General Service Manager, the service manager is responsible for overseeing the daily operations of a unionized Service Department, generating growth through service sales, managing forecasting and budgeting for the department, maintaining a safe work environment, hiring and developing staff and overseeing the maintenance of the buildings and grounds. Qualifications include: • 4 year college degree or trade school preferred. Will consider equivalent work experience • Minimum five years supervisory experience in a union environment supervising a minimum of 20 employees • Computer skills including Word, Excel, and Outlook • Understanding of budgeting and forecasting General Line Sales Representative - Newington, CT In this role, you will be responsible for maintaining and expanding the assigned territory (Southeast CT) and providing superior customer service to new and existing customers within the territory. We are seeking a highly motivated, experienced, achievement-driven individual who possess the following qualifications: • Minimum of Five (5) years outside product sales experience • Bachelor’s degree or equivalent combination of education and sales experience • Must possess excellent communication skills, and have a documented history of successful product sales • Must be computer literate and proficient with MS Excel • Excellent negotiation skills * All Three Positions REQUIRE a clean, Valid Driver’s license * H.O. Penn offers highly attractive compensation with outstanding benefits. To Apply, please go our online career center: http://careers-hopenn.icims.com EEO M/F/V/D Drug free workplace

Page 112 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

EZ Scr een 550XL, Works with 1 Yard Loader or 96” Bucket, Excellent 5’x4’ Vibratory Screenbox! Ideal for site cleanups. One man = 50 yards a day+. Talk to the folks that own them. 2 Year warranty. This will be the fastest payback of ANY machine you’ve ever bought. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NEW $9,500 plus fr eight. Other Scr eens Available www.ez-scr een.com • 866-745-5828 13-14 EB

Get ready for the Coming Season. Dump Trailers in stock. All sizes. Quality Products. 610/534-0700 Rick at Stephenson Equip/Keesler Div. 13-14 KU

“RACKS OF TRACKS!!!!” $1,500,000 Inventory of High Quality Rubber Tracks to fit over 2500 models of construction equipment. Up to 40% savings from OEM. $95 Next day delivery ...............Call Multi Machine Inc. 888-888-1248 13-14 RS

Excavator, Backhoe & Loader Buckets, New & used, over 200 in stock, also Grapples, Thumbs & other attachments

C&S Equipment Co. 609/267-0782

13-14 AP

SEE YOUR BARGAIN AD IN COLOR. O N LY $ 5 0 E X T R A 2009 IROCK Crusher RDS-15 Closed Circuit Crushing and Screening Plant. For more information call Sean Donaghy at 330/931-9595 13-14 EB

Lindig Topsoil Shredding & Screening Machine, App. 300 hours on Factory rebuilt Deutz, Air Cooled diesel $45,000 motor from Fleet Pride - excellent condition......$ (716) 691-8623 13-14 AP

FOR TWO INSERTIONS

Did this ad catch your attention? Color can work for you. Call Construction Equipment Guide 800/523-2200

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (Only one machine per Bargain Ad) and a maximum 17 word description plus contact and phone number. • Send Check for $95 with copy to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • The ad will run for two consecutive issues.

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Northeast States. For more information, call Constr uction Equipment Guide today at

800/523-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 113

CLASSIFIEDS AERIAL LIFTS Manlifts All Makes & Models Rental, Parts, Service, Training Modern Equipment Sales & Rental 800/445-4381

AIR COMPRESSORS Compressors AIRMAN COMPRESSORS Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054 Ingersoll-Rand New & Used Parts Modern Equipment Sales & Rental 800/445-4381

APPRAISALS Appraisal J D Balsarini & Associates Appraisal/Auctions Jim Balsarini 800/637-5614 www.jimbalsarini.com

2004 Cat CB534DXW, 832 hours ..........................$75,000 2005 Cat CS563E, 287 hours.. ....................................$75,000 2005 Cat CS563E, 1,778 hours ....................................$75,000

Trenchless Technology

Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Asphalt - Misc. Gehl: 1448 Plus, 1648 Plus LeeBoy: 8500, 1000 AEM Miller Drag Box Puckett: T650, T450, S240 Financing Available Call Ron 413-531-8119

ATTACHMENTS Hammers

Leeboy Pavers Various Pavers in stock U.S. Municipal Supply, Inc. 800/733-3776 1996 Gehl 1438, track paver, 812’, very good condition, 900 hours ..........................$14,000 Al Preston’s Garage 203/924-1747

Fagan’s Lehigh Equipment 609/476-3481 800/458-5238 faganslehigh@comcast.net www.terra-trenchless.com

COMPACTION EQUIPMENT Vibratory Compactors NEW & USED ROLLERS Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054 1992 Bomag BW142, 3600 hours ..........................$14,500

JDE Equipment Co. 616-530-2000

Call Dean Frey Equipment 973-875-7888

2003 Cat H160..........$55,000 2004 Cat H160..........$55,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

NEW & USED ATTACHMENTS

U.S, Municipal Supply Inc. 610/292-9450

TERRA PIERCING TOOLS, DIRECTIONAL DRILLS Sales, service, rebuilt units. Bursters, Rammers, Compact Geothermal Drills, Shop Training National Distributor

2008 Stanley MB50EXS, 200JD/Hitachi Hammer, S&D bit, almost new............$44,000.

Asphalt Pavers

Ask About Our Financing Specials!!

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 BORING EQUIPMENT

Misc Attachments

Variety of Pavers in Stock

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

Asphalt Rollers

ASPHALT EQUIPMENT

Leeboy Pavers

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion.

Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3208 Eagle PA 610/458-7054

Misc. Compaction Equip. 1981 Cat 815, OROPS, 50% feet, fair condition, 5325 hours $46,350. 1971 Cat 815, EROPS, strike off blade, fair condition, 11,237 hours ..........................$30,900. McAllister Equipment Jim Tracey 708/297-3541 2004 CAT 836G, 7159 hours ...................................$355,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

CRANES

WE KNOW ATTACHMENTS!

Crane Inspections G & H Services, Inc. Newton, NJ 973/383-3370 ————————————— Representing a full line of attachment manufacturers Jim Maillet 973-390-7392 Dick Clark 973-390-7390

ALL TYPES OF CRANES INSPECTED AND CERTIFIED Accredited by the US Dept. of Labor Under 29CFR Part 1919 and Accredited by CALOSHA Call 215-639-2579 Visit us at www.atlanticcrane.com

Specializing in Truck Mounted Cranes Modern Equipment Sales & Rental 800/445-4381

Long Reach Excavator Front Ends High Reach Demolition Front Ends Excavator Material Handlers Front Ends

CRAWLER TRACTORS Crawler Tractor 2004 4551 2004 3406

Cat D6RXLII, hours ................$139,000 Cat D8RII, hours ................$369,300 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381 2007 John Deere 450J, LGP, ROPS, hydro trans., 124’’ 6way blade, very good condition, 1072 hours ................$57,375. 2005 John Deere 650J, LGP, ROPS, hydro trans., 128’’ screen and sweeps, good condition, 1806 ................$57,800. Industrial Tractor Co. Inc. 843-572-0400

EXCAVATORS Hydraulic Excavators NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381 2001 Cat 311CU, cab w/air, thumb, 2800 hours ....$38,000. 2000 Hitachi EX 135UR, 4085 hours, blade ................$29,500 2006 Yanmar VIO75A, 788 hours, blade, aux. hyd $39,500 Call Dean Frey Equipment 973-875-7888 2006 Cat 303.5CCR, 698 hours ....................$39,900 2005 Cat 330CL, 2,366 hours ..............$199,000 2003 Cat 345BL, 4,941 hours ..............$199,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

PLUS Stick Extensions In Stock, 8’-12’-16’ & 20’ Complete Package with Bucket Call Percy Ransome Phone: 856-608-6999 or Cell: 215-350-1165 Fax: 856-608-7999 longreachhighreach@gmail.com www.longreachhighreach.com 2009 Liugong 922 with hydraulic thumb, new condition, 700 hrs ............$130,000. 207-834-3171

Mini Excavators NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381 1996 Takeuchi TB025, rubber track, ROPS, 18’’ PIM bucket, aux. valve, fair condition, 2670 hours ..........................$11,900. 2004 John Deere 35CZTC, rubber, cab, heat, 7760 lbs, aux. hyd., 24’’ bucket, quick attach, nice condition, 1734 hours ..........................$25,500. Erb & Henry Equip Inc 610/367-2169 2006 Komatsu PC50MR-2, 1600 hours ................$28,000.

FORKLIFTS Industrial Forklifts Gradall/Lull Sales, Service, Training Modern Equipment Sales & Rental 800/445-4381

Rough Terrain Forklifts 1997 Lull 844C-42, 5500 hours, 8000# lift, 42’ reach ...... $18,000. Call Dean Frey Equipment 973-875-7888

GENERATORS Generators & Gen Sets For Sale or Rent All Makes and Models Modern Equipment Sales & Rental 800/445-4381 For Sale or Rent All Makes & Models Modern Equipment Sales & Rental 800/227-2525 CAT Model 3406-350KW 480 Volt 3 phase CAT Model 3408-400KW 618 hours Cummins Model VT-12-700-GS 400-KW 812 hours Call Byrne Sand and Gravel 508-947-0724 or Cell 774-766-1499 FOR RENT Caterpillar Generator Sets 15KW to 1750KW Day, Week or Month with trailer, fuel tank, enclosure Alban Engine Power, Inc. Baltimore 301/796-8000 Washingotn DC 621-1424

Call Dean Frey Equipment 973-875-7888

HYDRAULIC HAMMERS

FORESTRY EQUIPMENT

Breakers

Logging Equipment 2010 Liugong 922, base with 453 ProPac Delimber, new condition, 700 hrs............$280,000 207-834-3171

ALLIED SALES/RENTALS Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

Page 114 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LANDSCAPE EQUIPMENT Misc. Landscape Equip 2001 Kubota L48TL, 4WD, hydro loader, 72’’ bucket, ROPS, good condition, 1850 hours ..........................$19,500. Erb & Henry Equip Inc 610/367-2169 Gehl Skid Steer Loaders, Excavators, Track Loaders, Attachments! Rent or Purchase Norris Sales Company 610/279-5777

Track Loaders Backhoe Loaders 1994 Deere 310D, 4WD, Estick ............................$20,500 1987 John Deere 310C, 4x4, E-stick, cab ................$16,000. Call Dean Frey Equipment 973-875-7888 2007 John Deere 310J, ROPS, turbo, 4x4, GP loader, 24’’ bucket, very good condition, 71 hours ..........................$58,635. 2007 John Deere 310J, ROPS, 4x4, power S trans., GP front bucket, 24’’ BH bucket, very good condition, 55 hours.......... ..................................$57,200. 2009 John Deere 310SJ, ROPS, turbo, 4x4, PS trans., P controls, ext. hoe, GP loader bucket, 24’’ BH bucket, excellent condition, 38 hours ............ ..................................$73,700. 2006 John Deere 310SG, ROPS, turbo, 4x4, PS trans, P control, ext. hoe, GP bucket, 24’’ BH bucket, excellent condition, 384 hours ..........$57,300. 2004 John Deere 410G, ROPS, 4x4, turbo, P controls, PS trans, ext. hoe, GP bucket, 24’’ BH bucket, good condition, 2862 hours ................$39,500. Industrial Tractor Co. Inc. 843-572-0400 NEW & USED BACKHOE LOADERS Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

Skid Steer Loaders 2000 John Deere 270 II, ROPS, 8500 lb., single speed, 84’’ bkt, 21.3 gpm, very good condition, 776 hours ..$21,500. 2002 Bobcat S300, cab w/air, bucket, hi-flow, 25 hp, 300 lb cap., good condition, 2144 hours ..........................$24,000. Erb & Henry Equip Inc 610/367-2169

2006 Cat 953C, 1004 hours .... ..................................$135,000 Cat 953C, 3577 hours.............. ..................................$115,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

MISCELLANEOUS Misc

Wheel Loaders NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381 2004 Cat 966G II, A/C, ride control, 23.5xR25 tires 50%, good condition, 10,275 hours .. ................................$103,000. 2000 Cat 980G, A/C, ride control, straight edge bucket w/teeth, good condition, 9321 hours ..........................$92,700. McAllister Equipment Jim Tracey 708/297-3541 1972 Cat 920 Wheel Loader, forks and bucket ........$12,900. Call John 607-655-5550 1997 Case 580SL, ext. hoe, 4WD, dual levers, 82’’ loader bucket & 24’’ backhoe bucket, good condition, 6750 hours...... ..................................$28,500. Medico Industries 570/825-7711 2006 Cat 904B, 3,456 hours.... ....................................$29,000 2005 928GZ, 2519 hours ........ ....................................$87,300 2006 Cat 972H, 3,180 hours.... ..................................$229,000 1998 Cat 990 ............$599,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729 2005 Multi-One SL30D, 32 HP Mini Wheel Loader, 2300 lbs, 48’’ bucket, good condition ...... ..................................$15,000. Erb & Henry Equip Inc 610/367-2169

UTILITY VEHICLES 2004 John Deere HPX 4x4, diesel, front bumper, electric lift, like new, 141 hours ......$8,550. 2005 John Deere HPX 4x4, electric lift, good condition, 750 hours ............................$6,900. Erb & Henry Equip Inc 610/367-2169 NEW PARTS Hyundai - Mustang Okada - Sakai Yanmar Call: John Stevens or Jeff Brooks G & H Services, Inc. 973/383-3370 Fax: 373/383-5756 1987 Cat 963, s/n 21Z1370, Balderson coupler, S/D bucket, forks, new U/C, engine, HPCU C/P ............................$34,800. 1995 Cat CP563C Padfoot Roller, excellent shape, 50% rubber ........................$29,600. 1990 Dresser 6200, s/n 4230, aux. hyd., JRB coupler, 42’’ magnet (hyd) ..............$71,200. 1996 Hyundai 210LC, s/n 10025, 50’ long front, excellent shape, aux. hyd..........$69,800. Bob Harrell 609-561-7702

Service We Service What We Sell! Warranty, Maintenance and More! Heavy Equipment, Light Equipment, Hand Tools & Gas Detectors Norris Sales Company 610/279-5777 ON SITE A/C REPAIRS AND INSTALLATIONS Construction Equipment and Heavy Truck

Track Loaders 1980 Cat 941B, 4-in-1 bucket, cab, 1 owner ..............$11,000. Call Dean Frey Equipment 973-875-7888

Eastern PA and surrounding states. Doylestown Services Dave Wallace 215-470-0870

LINE BORING ON-SITE! Construction Equipment Industrial & Heavy Truck Eastern PA and surrounding states. DOYLESTOWN SERVICES Dave Wallace 215-470-0870 250 Hour Service Specials on Skid Loaders & Telescopic Material Handlers Now in PA & NJ!!! Call for Details Norris Sales Company 610/279-5777

PARTS Crane Parts TEREX PARTS Modern Equipment Sales & Rental 800/445-4381

Undercarriages NEW UNDERCARRIAGE PARTS Caterpillar D3, D3B, D3C, D4C, 931...6.125 Pitch 6S8800MT Link Assy., (2), 36 section, dry, master pin, 9/16’’ bolt ........................$849.00 Ea. 6S605MT Link Assy., (4), 36 section, dry, split master, 9/16’’ bolt ........................$874.00 Ea. 6S9066MT Link Assy., (4), 36 section, SALT, split master, 9/16’’ bolt............$1,099.00 Ea. 6Y1339MT Link Assy., (4), 36 section, SALT, split master, 9/16’’ bolt............$1,105.00 Ea. 3T6705MT Link Assy., (2), 37 section, SALT, split master, 9/16’’ bolt............$1,150.00 Ea. Komatsu D30A, D31A, D31B, D37E, D31S, D31P... 6.0126 Pitch TR1103211292 Track Pad, (118), 14’’ single grouser, 14mm bolt ................$7.39. Ea. TR1113000260 Top Roller (2), complete w/shaft....$82.00. Ea. TR1113000281 Bottom Roller (9), double flange $103.00. Ea. G & H Services, Inc. 973/383-3370 973/390-7394 Cell Fax: 373/383-5756

Tractor Parts NEED CASE DOZER TRANSMISSION PARTS? We supply new & used transmission and differential parts for Terratrac GT, 200, 300 Series. Case 310, 350. SERVICES AVAILABLE: Transmission rebuilding, steering band relining. Full line of Oliver-Cletrac parts stocked. Zimmerman Oliver-Cletrac Ephrata, PA 717-738-2573 Fax: 717-733-3529 www.olivercletrac.com

Miscellaneous Parts Manitowoc - Grove National Crane - Terex P&H - Lorain Koehring - JCB Doosan - Case Atlas Copco - Genesis Leeboy Hoffman Equipment 1-800-4-HOFFMAN Piscatawy, NJ Williamstown, NJ Medord, NY Bronx, NYC Marlboro, NY USED TRAMAC HAMMER PARTS Quality used Tramac Parts f or 140, 625, BRV32, or 501 hammers Plasterer Equipment Co. Inc. 800/225-4001 or e-mail lebanon@plasterer.com JOHN DEERE USED PARTS All Makes In Stock! Nationwide Availability 1-800-344-3205 Industrial Tractor Co., Inc. Jacksonville, FL VISA/MC

RENTALS Rental DAILY-WEEKLY-MONTHLY Long Term Rentals: Loader Backhoes, Wheel Loaders, Crawler Dozers, Excavators, Mini Excavators, Compact Wheel Loaders, Articulated Trucks, Skid Steer Loaders, Trenchers, Cable Plows, Rollers, Hydraulic Hammers, Landscape Attachments & More Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

www.norrissales.com Daily - Weekly - Monthly Competitive Rates Mixers, Generators, Arrow Borads, Compaction, Excavators, Loaders! Now in PA & NJ Norris Sales Company 800/547-RENT (7368) 610/279-5777 Boxer 532DX Mini Skid Steer Stand On Auger, Bucket, Trencher Erb & Henry Equip Inc 610/367-2169 Construction & Equpment & Supplies for the “Professionals” Daily - Weekly - Monthly & Long Term Rentals Available Stone, Wacker, Honda, Gehl, JLG to name a few ..... Norris Sales Company 610/279-5777 Hydraulic Excavators, Wheel Loaders, Crawler Loaders, Crawler Dozers, Compaction Equipment, Hammers, Motor Graders, Screens & Conveyors, Articulated Haulers, Backhoe Loaders, Elevating Scrapers, Loadalls. Midlantic Machinery Co. Hatfield PA 215/822-0145 Harrisburg PA 717/652-3190 Wilkes-Barre PA 717/824-9891 Baltimore MD 410/247-2100 Delmar DE 302/846-0224 Construction Equipment Rentals Modern Equipment Sales & Rental 800/445-4381 Construction & Industrial Equipment Rentals Compaction, Excavating, High Lifts, Traffic Control, Safety, Loaders, Landscaping Norris Sales Company 610/279-5777 Stone, Wacker, MBW, Diamond Products, Honda, IR, AGL, Sky Trak, JLG, JoBox, DeWalt, Stihl, Imer Rentals, Sales, Service Mon-Fri 6:30 am - 5:00 pm Sat 7:00 am - 12:30 pm Norris Sales Company 610/279-5777

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 115

ROAD MAINTENANCE Sweepers 2002 Rosco SweepPro, 8’ w/ poly brush, 85hp Cummins, new condition ..............$29,995 U.S. Municipal Supply, Inc. 800/733-3776 Johnston-Allianz M7 350 High Side Dump Chassis Mount Sweeper! Call for Demonstration U.S. Municipal Supply, Inc. 800/733-3776 NEW Johnston-Allianz MST New High Dump Chassis Mount Sweeper! U.S. Municipal Supply, Inc. 800/733-3776 NEW Rosco RB-48, Enclosed cab. New Units for Sale or Rent. U.S. Municipal Supply, Inc. 800/733-3776

SCRAPERS Motor Scrapers 1998 Cat 627F, 9,740 hours .... ..................................$299,000 1998 Cat 627F, 10,307 hours .. ..................................$299,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

TRAILERS Low Bed Trailers RENT LOW BEDS 35 & 50 ton Rogers Weekly & Monthly

NEW & USED TRAILERS Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

TRAINING Operator Training Are your operators compliant with Federal Standards, OSHA, ANSI, ISO? MODERN GROUP offers training for: - Front-end Loaders & Backhoes - Aerial work platforms (AWP) (Boom & Scissor Lifts) - Rough Terrain Forklifts (Gradall, Lull, JCB) - Skid Steer Loaders For information, pricing or reservations: Call 1-800-223-3827 www.moderngroup.com All prices include Trainer, travel and material NO HIDDEN COSTS CRANE OPERATIONS TRAINING NCCCO Certification Crane Operator Rigger Signal Person Stephenson Equipment provides training at our locations in Harrisburg, PA and McDonald, PA or we will provide training at your PA company.

Stephenson Equipment/ Keesler Division 610/534-0700 Located @ I-95 & RT420 Exit 9-B Propsect Park, PA

Visit www.stephensonequipment.com Click on NCCCO Training or call 1-800-325-6455 x1154

Miscellaneous Trailers

NCCCO Crane Operator Training

FULL LINE GENERAL Eager Beaver Trailers in stock Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

OSHA Approved Safety Seminars Fall Protection, Confined Space, Trenching & Shoring, First Aid/CPR, Backhoe Safety, Industrial Forklift $95 Each

Get an edge on your competition! Construction Equipment Guide Northeast Edition subscribers are the best informed about construction news, construction equipment, sales, auctions, equipment prices, trends and changes in the industry and activities of its people. Call Toll Free! We now accept Visa, Mastercard & American Express!

Call for a schedule Norris Sales Company 610/279-5777

SUBSCRIPTIONS:

Mask Fitting, First Aid & CPR, Forklift Safety, Fall Protection, Confined Space ............$95.00

One Year $65

(within United States & Puerto Rico Only)

CARDMEMBER’S NAME _________________________________________________________

Call Dave Norris Sales Company 610/279-5777

COMPANY NAME _______________________________________________________________

TRENCHER

CITY ______________________________________STATE _______ ZIP ________________

STREET____________________________________ PHONE NO. ________________________

TYPE OF BUSINESS _____________________________________________________________

Trenchers

Check Enclosed

Vibromax 1500-33, s/n 4202108, remote trench roller, full warranty, pictures available, good condition, 50 hours.......... ..................................$24,500.

VISA

TRUCKS Bucket Trucks ELLIOTT BUCKET TRUCKS

American Express

EXP. DATE (Mo./Yr.) SIGNATURE OF AUTHORIZED CARDHOLDER

TOLL FREE

NEW & USED TRENCHERS Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

MASTERCARD

CARD NUMBER

Farm-Rite Inc. 908/625-0697

1-800/523-2200 FAX 215/885-2910

470 Maryland Dr. • Ft. Washington, PA 19034 Email: circulation@cegltd.com

Classified...2 Insertions...95¢ Per Word

Use the form below to place a classified ad in the Construction Equipment Guide. It could bring the inquiry for which you are looking.

One Word HEADING (Category to place listing):

Each

Block

Modern Equipment Sales & Rental 800/445-4381

Misc Trucks 2004 Cat 735, 4,035 hours ...... ..................................$249,000 2005 Cat 735, 3,738 hours ...... ..................................$269,000 2006 Cat 740, 3,320 hours ...... ..................................$305,000 1994 Cat D350D, 20,412 hours ..........................$49,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

CLASSIFIED RATES: 95¢ Per Word. Minimum $30.00 (30 words or less). Ad runs for two insertions - no changes in second insertion. Initials count as separate words. Telephone numbers including Area Code count as one word. Please indicate the appropriate heading you wish your ad to be listed under. Payment must be made in full for your ad to run. For just an additional $20 your ad can be posted on our online searchable database for 30 days - use your credit card or send payment to Construction Equipment Guide. CARD MEMBER’S NAME _________________________________________________COMPANY NAME ___________________________________________________

WATER EQUIPMENT

STREET______________________________________________________________________PHONE NO. _________________________________________________

Water Wagons

CITY _______________________________________________________________________STATE ___________________________ ZIP __________________________

Tower, Rigger and Signal Person. Trained at our location in PA or NJ or your location.

1996 Volvo 5500 Gals., Automatic 2 Available $39,000.

All trainers NCCCO Certified

1994 GMC 2800 Gals., Automatic $15,000

Call 215-639-2579 Visit us at www.atlanticcrane.com

Subscribe to CEG today...

Safety Training

Richard Pedroni 800-642-9191 Pedroni Fuel Company

Check Enclosed

VISA

MASTERCARD

AMERICAN EXPRESS

CARD NUMBER

EXP. DATE

SIGNATURE OF AUTHORIZED CARDHOLDER

TOLL FREE 1-800/523-2200 FAX 215/885-2910 470 Maryland Drive • Fort Washington, PA 19034 Email: sales@cegltd.com

Page 116 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. 307D MINI HYDRAULIC EXCAVATOR | NEEDS TO HAVE RUBBER TRACKS. CONTACT MY SON MIKE MILLER @ 724 428 4022 Contact: DALE MILLER Phone: 724 428 4022 Email: dale_miller54@yahoo.com –––––––––––––––––––––––––––––––– CATERPILLAR 420E BACKHOE Contact: CREED Phone: 2307764 Email: rtraynet@gmail.com –––––––––––––––––––––––––––––––– MORBARK 13 OR 15 CHIPPER WHOLE OR PARTS | LOOKING FOR A CUTTER HEAD FOR A MORBARK 13 Contact: TIM LEWANDOWSKI Phone: 724-887-9375 Fax: 724-887-4899 Email: lewequip@gmail.com –––––––––––––––––––––––––––––––– CAT 315CL 3000 HRS MAX GOING TO NE | AUX HYDS. A PLUS Contact: RICHARD Phone: 603 828-6100 Email: cmiequp@yahoo.com –––––––––––––––––––––––––––––––– KOBELCO EXCAVATOR | LOOKING FOR KOBELCO EXCAVATORS SK200/210 AND 300 MUST HAVE GOOD U/C AND BE IN GOOD RUNNING CONDITION. MUST BE CLOSE TO AUCTION PRICES. MUST BE IN THE U.S THANK YOU, Contact: RANDY REECE Phone: 770-966-9056 Fax: 770-966-9035 Email: randy@globalequipmentexporters.com –––––––––––––––––––––––––––––––– JRB FORK ATTACHMENT FOR 410E Contact: LEON MARTIN Phone: 717-587-0311 Email: leonr@lrmex.com –––––––––––––––––––––––––––––––– CAT WHEEL LOADERS | WE NEED CAT LOADERS 916 AND 950B.WE NEED ALSO HITACHI CHAIN EXCAVATOR EX200-1.DYNAPAC ROLLERS CA25D,CA30D AND CA251D. Contact: RIZWAN Phone: +92-345-6429345 Fax: +92-213-6057723 Email: riz_din2000@yahoo.com –––––––––––––––––––––––––––––––– CAT D7R WITH RIPPER AND 3306 ENGINE UNDER 9000 HOURS Contact: NATACHA Phone: 0033-698-17-4467 Email: natacha@abnequipment.com –––––––––––––––––––––––––––––––– CATERPILLAR PIPELAYERS I WANT TO BUY CATERPILLAR PIPELAYERS MODEL 594, 583, 572, 571 Contact: TONY THOMAS Phone: 818-956-5231 Fax: 818-956-5239 Email: tonythomas@pacificcranes.com –––––––––––––––––––––––––––––––– CAT 992D CLEAN & WORK READY GOING TO NE Contact: RICHARD Phone: 603 828-6100 Email: cmiequip@yahoo.com ––––––––––––––––––––––––––––––––

ATLAS COPCO D711 BLASTHOLE DRILL I WANT TO BUY ATLAS COPCO D7-11 BLASTHOLE DRILLS. Contact: TONY THOMAS Phone: 818-956-5231 Fax: 818-956-5239 Email: tonythomas@pacificcranes.com –––––––––––––––––––––––––––––––– ROTARY PILING RIG Contact: SUNIL PATEL Phone: 91-22-26736947 Fax: 91-22-26732978 Email: spatel@indianabuild.com –––––––––––––––––––––––––––––––– KUBOTA KH28 FOR PARTS FINAL DRIVES COMPLETE OR GEARS MAIN PROBLEM PN 68241-13410. WOULD TAKE A COMPLETE MACHINE OR WHAT YOU HAVE LEFT OF ONE 1984 KH-28 KH-170 IS THE SAME. Contact: BOB ZUZNIS Phone: 845 221 2603 Fax: 845 221 2603 Email: sellerrez32@aol.com –––––––––––––––––––––––––––––––– KOMATSU WA3803 | EROP WITH AIR. WORK READY CONDITION. GP BUCKET. Contact: PATRICK KELLY Phone: 800-403-2263 Fax: 716-891-4346 Email: pkelly@hrparts.com –––––––––––––––––––––––––––––––– CASE LOADER BACKHOE 580L OR 580SL • CASE LOADER BACKHOES 2 WHEEL DRIVE 580L OR 580SL ENCLOSED CAB, REASONABLE PRICE GOOD COND! Contact: FRANK ZACCARINO Phone: 973-650-9268 Email: zacc1@optonline.net –––––––––––––––––––––––––––––––– NEED TO BUY A RIPPER FOR 8230B TEREX DOZER Contact: JAKE DATES Phone: 315-879-0806 Email: microracer68@yahoo.com –––––––––––––––––––––––––––––––– MORBARK MODEL 13 OR 15 IN NEED OF REPAIR • MORBARK 13 OR 15 WITH BAD ENGINE OR IN NEED OF REPAIR Contact: TIM LEWANDOWSKI Phone: 724-887-9375 Fax: 724-887-4899 Email: lewequip@gmail.com –––––––––––––––––––––––––––––––– KOMATSU LOADER, WA100, WA150, WA200 • IF YOU HAVE KOMATSU LOADER, LIKE WA100, WA150, WA200, WA250 ETC. PLEASE EMAIL, PLEASE DO NOT PUT YOUR MACHINE ON AUCTION, SELL YOUR MACHINE TO ME, I CAN PAY 100% IN ADVANCE IF YOUR MACHINE IS GOOD Contact: IBRAHIM Email: ibrahimmashali@gmail.com –––––––––––––––––––––––––––––––– LOADER BACKHOE Contact: FRANK HORAN Phone: 732-674-2095 Fax: 856-697-4842 Email: fhoran@tricoequipment.com ––––––––––––––––––––––––––––––––

BUCKET | NEED A HD ROCKET BUCKET TO FIT A KOMATSU PC800-8 78-84" WIDE 6-1/2-7-1/2 CU YD. NEED ASAP Contact: LARRY LEISTIKOW Phone: 608-438-1783 Fax: 608-655-1300 Email: lleistikow@yahoo.com –––––––––––––––––––––––––––––––– CATERPILLAR MOTOR GRADER 140G • PLS SEND WHOLESALE, UN-ADVERTISED UNITS OFFERS FOR 140GS WITH REAR RIPPER IN 72V SERIES, YEAR 1985 TO 1995. Contact: ATHER A. SIDDIQUI Phone: +92-333-2240692 Email: ather.cat@gmail.com –––––––––––––––––––––––––––––––– KOMATSU PC95 OR EQUIVLENT • CLEAN & WORK READY Contact: RICHARD Phone: 603-828-6100 Email: cmisold@yahoo.com –––––––––––––––––––––––––––––––– 30 FOOT ALUMINUM END DUMP TRAILER • LOOKING FOR OLDER MODEL 3032 FT. FRAME TYPE ALUMINUM END DUMP TRAILER. Contact: MIKE PIEPER Phone: 319-372-2276 Fax: 319-372-2277 Email: pi2279@yahoo.com –––––––––––––––––––––––––––––––– TERRAMITE T5C FRAME FRAME FOR SPECJ1040 MARCH 1997, 6000LB Contact: DAVID PARSONS Phone: 304-733-5098 Email: matt2101@verizon.net –––––––––––––––––––––––––––––––– D8H WITH 4BARREL RIPPER Contact: PAUL T. REEVES Phone: 336-363-4110 Email: paultreeves@skybest.com –––––––––––––––––––––––––––––––– PC300LC5 KOMATSU PC300-5 OR PC300-7,PC400-5 PC400-7 PC228US-3 Contact: JIM Phone: 626-443-2443 Fax: 626-443-4674 Email: info@maxland.com ––––––––––––––––––––––––––––––––

MORBARK 13 OR 15 CHIPPER LOOKING FOR A CUTTER HEAD FOR A MORBARK 13 CHIPPER Contact: TIM LEWANDOWSKI Phone: 724-887-9375 Email: lewequip@gmail.com | –––––––––––––––––––––––––––––––– KUBOTA 6100 FRONT END LOADER FRONT END LOADER FOR 1981 KUBOTA 6100, DID SEE A MODEL NUMBER OF B 219 MANUFACTURED BY OTHER THAN KUBOTA Contact: SCOTT WEST Phone: 330-958-1426 Email: howiserinfree@yahoo.com –––––––––––––––––––––––––––––––– 2007 CATERPILLAR D6N LGP LOOKING FOR A 2007 CATERPILLAR D6N LGP EQUIPMENT. Contact: DAVE Phone: 813-464-2163 Email: shaba13@gmail.com –––––––––––––––––––––––––––––––– BOB CAT GLASS DOOR S185 Contact: WAYNE Phone: 1-810-724-6131 Email: waynesworldllc@yahoo.com –––––––––––––––––––––––––––––––– FORK FRAME AND FORKS JCB WHEEL LOADER LOOKING FOR JCB QUICKHITCH COMPATIBLE FOR A 426 HT NEED FORK FRAME AND FORKS Contact: DANIEL PETERS Phone: 920-471-4296 Fax: 920-491-1027 | Email: danp@go-jcb.com –––––––––––––––––––––––––––––––– REGULATEUR DE DEBIT POUR CHARGEUR SUR PNEU O ET K Contact: KEFIF Phone: 00213661200428 Fax: 0021341468376 Email: smci_maghreb@yahoo.fr –––––––––––––––––––––––––––––––– CATERPILLAR AND KOMATSU PIPELAYERS WE WANT TO BUY CATERPILAR 572G, 583K, 594H PIPELAYERS ALSO LOOKING FOR KOMATSU D355C PIPELAYERS. NO BROKERS PLEASE. WE ONLY BUY FROM END USER. Contact: TONY THOMAS Phone: 818-956-5231 Fax: 818-956-5239 Email: tonythomas@pacificcranes.com ––––––––––––––––––––––––––––––––

To Consign Equipment to Alex Lyon’s Auctions 856/429-9149

856/429-9149

Fax# 856/429-4267 • Cell# 609/457-2104

www.ecommercics.com/stuharris/

JIB POLE I HAVE A TEREX 41M BUCKET LIFT ON MY TRUCK. I NEED THE FIBERGLASS JIB POLE PART # 0454002 Contact: DAVID LARAIA Phone: 860-250-6659 Fax: 860-432-0641 Email: dlaraia@cox.net –––––––––––––––––––––––––––––––– HYDRAULIC EXCAVATOR MACHINE WITH LESS THAN 3000 HRS. 70 LONG STICK AND 2 YD BUCKET. EMAIL PICTURES, LOCATION AND PRICE Contact: BEAUFORD MULLINS Phone: 260 497 0500 Fax: 260 490 8217 | Email: beauford@kortebros.com –––––––––––––––––––––––––––––––– CAT, KOMATSU, VOLVO, KAWASAKI, CALL US! WE WANT TO BUY YOUR EQUIPMENT! WE BUY CAT, KOMATSU WHEEL LOADERS, EXCAVATORS MOTOR GRADERS & DOZERS WE ARE LOOKING FOR ALL SIZES OF CAT & KOMATSU WHEEL LOADERS ANY YEAR OR MODEL. WE ALSO BUY CAT & KOMATSU MOTOR GRADER, EXCAVATORS AND DOZERS. WE ALSO BUY ANY/ALL PARTS MACHINES. CALL SCHEER BROTHERS, LLC ASK FOR RHONDA OR DAVE Contact: RHONDA SCHEER Phone: 610-544-3399 OR 484-326-9494 Email: rhonda@scheerbrothers.com –––––––––––––––––––––––––––––––– CRAWLER CRANE NEED TO USED CRAWLER CRANE MANITOWOC 18000 - 600 TON, YEAR 2007, COLLAPSED IN SOME ACCIDENT. IF AVAILABLE, PLEASE SEND OFFER WITH PHOTO AND QUOTE. Contact: TRANG KIM MINH Phone: 84-8-38405292 Fax: 84-8-38980845 Email: trangkimminh@gmail.com –––––––––––––––––––––––––––––––– LAY-MOR BROOM 6HB, EXCELLENT CONDITION Contact: A.H. CORNELL Phone: 215-343-1830 –––––––––––––––––––––––––––––––– NEED TO BUY 3 BULLDOZER JD 2007 AND MOORE ENC CAB WICH Contact: JEAN MAURICE BOUTIN Phone: 1 450 346 8975 Email: jeanmauriceboutin@videotron.ca –––––––––––––––––––––––––––––––– CAT D5 LGP/DEERE 650H LGP ETC FROM CONTRACTOR Contact: KEVIN SANSALONE Phone: 856-297-4758 Fax: 856-362-5602 Email: kevin@sansaloneexcavating.com –––––––––––––––––––––––––––––––– CONETRACKW/ONBOARD 6X20 3 DECK SCREEN. DESCRIBE WHAT YOU WANT. Contact: RICHARD Phone: 603 828-6100 Email: cmisold@yahoo.com –––––––––––––––––––––––––––––––– T600D VERMEER TRENCHER OR TRACK PARTS Contact: CHUCK Phone: 248-474-1200 Fax: 248-474-7954 Email: noviwall@yahoo.com ––––––––––––––––––––––––––––––––

JCB 1400 JCB 30 OR 36 INCH BACKHOE BUCKET AND FRONT BKT FORKS W/ROD, 5 OR 6 FT. LONG. Contact: DONNIE TURNER Phone: (731)-609-8454 Email: dntkmt50@comcast.net –––––––––––––––––––––––––––––––– 1998 TO 2002 KOMATSU PC400LC6. MACHINE MUST BE IN THE U.S AND WHOLESALE PRICING PLEASE. Contact: RANDY REECE Phone: 770-966-9056 Fax: 770-966-9035 Email: randy@globalequipmentexporters.com –––––––––––––––––––––––––––––––– EXCAVATOR EXTEND ARM Contact: DOLORES CARD Phone: 570-224-4410 Fax: 570-224-4940 Email: damtres1@ptd.net –––––––––––––––––––––––––––––––– CATERPILLAR AP1050 ASPHALT PAVER. WE ARE LOOKING FOR FEW CATERPILLAR AP1050 ASPHALT PAVERS. WE PAY TOP DOLLAR FOR YOUR PAVERS. PLEASE OFFER US IF YOU HAVE ANY FOR SALE. WE ALSO COULD USE BARBER GREEN BG245 Contact: TONY THOMAS Phone: 818-956-5231 Fax: 818-956-5239 Email: tonythomas@pacificcranes.com –––––––––––––––––––––––––––––––– SCHRAMM T685WS ROTADRILL, WANT TO BUY SCHRAMM T685WS ROTADRILL, IT MUST HAVE QTTA CUMMINS MOTOR (700 HP) AND SULLAIR COMPRESSOR 1150 CFM 500PSI. T685WS ROTADRILL Contact: TONY THOMAS Phone: 818-956-5231 Fax: 818-956-5239 Email: tonythomas@pacificcranes.com –––––––––––––––––––––––––––––––– JOHN DEERE 160C OR COMPARABLE. LESS THAN 10 YEARS OLD, WILL CONSIDER COMPARABLE UNIT Contact: KIRK Phone: 888-545-1187 Fax: 888-545-2187 Email: kirks@acgcapital.com –––––––––––––––––––––––––––––––– CASE 621C. NEW OR USED 5 YARD BUCKET Contact: GREG HEINTZMAN Phone: 219-787-1341 x112 Fax: 219-787-5020 Email: gheintzman@scrapmetalservices.com –––––––––––––––––––––––––––––––– HSG AUCTIONS. WE ARE A NEW HEAVY EQUIPMENT AUCTION COMPANY LOCATED ON THE MS GULF COAST. WE ARE LOOKING FOR SEVERAL MACHINES TO AUCTION. AUCTION IS OPEN TO THE PUBLIC. DEALERS IN OUR AREA, PLEASE CONTACT US. WWW.HSGAUCTIONS.COM Contact: GULFPORT, MS Phone: 228-832-0034 Fax: 228-832-0734 Email: info@hsgauctions.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 117

Miller’s Big Blue 400 Helps Reduce

PLAN AHEAD ALEX LYON & SON SALES MANAGERS & AUCTIONEERS, INC. Bridgeport, New York

Fuel Consumption Miller Electric Mfg. Co.’s Big Blue 400 Eco Pro welder generator is practical for work in pipe welding, structural steel, fabrication, field maintenance and repair applications. Offering Stick, TIG, MIG, FCAW and CAC-A processes, the Big Blue Eco Pro reduces fuel use up to 25 percent and is 44 percent smaller/41 percent lighter than other models with similar output, according to the manufacturer. Its 5,500 watts of peak power will run lights, grinders and many electrical tools, while its Mitsubishi S4L2 Tier IVi compliant diesel engine is designed to run 10,000 hours before a major overhaul and produces 50 percent less noise than previous models. Taking into account average diesel costs of $4.00/gallon and the habits of a typical user — 50 percent idle time, 40 percent at 150 amps, and 10 percent at 400 amps — a welder can save up to $1,990/year per machine in fuel costs without sacrificing performance, according to the manufacturer. Built to Perform in Harsh Industrial Applications Fuel savings and long engine life are achieved by tailoring the machine’s output to the user’s demand: the machine runs 1,500 rpm at idle, 1,800 rpm for welding up to 350 amps, and 3,000 rpm for high power applications up to 500 amps. The Big Blue 400 Eco Pro offers weld outputs and duty cycles to match a wide range of heavy-duty industrial applications: • 300 amps/100 percent duty cycle for Stick, TIG and Flux Cored welding in economy mode (1,800 rpm). • 400 amps/100 percent duty cycle for welding and 500 amps/40 percent duty cycle for carbon arc gouging (up to 5/16-in. carbons) in power mode. All rated outputs are rated at 104 F (40 C) and tested to 122 F (50 C) for optimal performance and integrity. Circuit boards are protected by Miller’s sealed aluminum vault that protects the machine’s electronics and performance from heat, moisture, dust and other atmospheric contaminants. The operator interface is simplified with color-coded output terminals, a weld process select switch and newly designed fuel gauge/monitor. The fuel gauge includes an hour meter, oil change interval monitor, high coolant temperature/low oil pressure and low fuel shutdown that shuts down the engine before it runs out of fuel, making restarts easy. The machine also features thermal overload protection to prevent machine damage if the duty cycle is exceeded or airflow is blocked. Up to 44 percent smaller and 41 percent lighter than other models, the Big Blue 400 Eco Pro takes up less room and reduces transportation costs while cutting operating costs by reduced fuel consumption, according to the manufacturer. For more information, call 800/426-4553 or visit www.MillerWelds.com.

IMPORTANT AUCTIONS

2 0 1 0 Auction

www.lyonauction.com www.lyonauctionlive.com

Calendar

Visit www.lyonauction.com for details... 1.

Saturday, July 10: ALBANY, NEW YORK: Complete Liquidation of 3 Generations in Business. Excellent Paving, Construction, Support Equipment, Trucks & Trailers. 2. Wednesday, July 14th: DALLAS (FT. WORTH), TEXAS: Rental Returns of Forklifts, Aerial Lifts, Construction, Support Equipment, Trucks & Trailers. 3. Thursday, July 15: SAN BERNARDINO, CALIFORNIA: Late Model Construction, Support, Trucks & Trailers. 4. Saturday, July 17: SYRACUSE, (CANASTOTA), NEW YORK: Lyon’s Annual Summer HayCamp & Friday Night Barbecue: Late Model Construction, Support, Aerial Lifts, Trucks & Trailers. * Stop in for the Barbecue Friday, July 16th before the sale and see the latest addition to the Lyon Family. It’s a site to see! 5. Friday, July 23: CLEVELAND, OHIO: Dump Trucks, Truck Tractors, Straight & Pickup Trucks, Drop Decks - Hi-Flat & Dump Trailers, Support Equipment. 6. Saturday, July 24: ATTLEBORO, MASSACHUSETTS: Job Completion Auction Of Leased Equipment - Fleet Construction. Very Late Model Cat, John Deere Construction Equipment, Support, Trucks & More. 7. Saturday, July 31: RUTLAND, VERMONT: Logging & Sawmill Operation: Full Line of Skidders, Delimbers, Prentice Log Loaders, Sawmill, Trucks, Trailers & Support Equipment. 8. Friday, August 6: QUERETARO, MEXICO: Late Model Construction Equipment, Large Quantity of Forklifts, Support Equipment, Trucks & Trailers. 9. Saturday, August 7: RACINE, WISCONSIN: Job Completion Auction: Construction-Landscape & Support Equipment, Trucks & Trailers. 10. Sunday, August 8: ROCHESTER, NEW YORK: Large Quantity of New & Used Support, Construction Equipment, New Wood, Lumber & More. 11. Saturday, August 14: BUFFALO, NEW YORK: Estate Auction: Cranes, Draglines, Buckets, Large Quantity of Support Equipment. 12. Thursday, August 19: ORLANDO (KISSIMMEE), FLORIDA: Late Model Rental Returns. Construction, Support Equipment, Aerials, Forklifts, Trucks & Trailers.

13.

Friday, August 20: COLUMBUS, OHIO: Secured Party Sale: 20 Plus Late Model 2007 Peterbilt & Freightliner Truck Tractors, (95) 2007-2002 53ft. Van Trailers, Assortment of Construction Equipment. 14. Wednesday, August 25: HOUSTON, TEXAS: Rental Return Auction of Forklifts, Aerials, Construction, Support, Trucks & Trailers. 15. Saturday, August 28: MONTICELLO, NEW YORK: Complete Liquidation of Earthmoving Equipment, Support, Trailers & Trucks. 16-17. Wednesday, September 15 & Thursday, September 16: FORT WAYNE, INDIANA: 2 DAY AUCTION!: Construction, Aerial Lift, Forklift, Support Equipment, Trailers, Truck Tractors, Pickups. 18. Friday, September 17: RICHMOND, VIRGINIA: Complete Liquidation of Late Model Cat Earthmoving Equipment, Trucks, Trailers & Large Amount of Shop Equipment. 19.-20. Saturday, September 25 - Sunday, September 26: ATLANTIC CITY, NEW JERSEY: Very Large Construction, Forklift, Aerial,Truck & Trailer Rental Returns plus All Types of New Building Supplies. 21. Friday, October 8: SAGINAW, MICHIGAN: Large Construction, Agricultural, Support Equipment, Truck & Trailer Auction. 22. Sunday, October 10: WESTMINSTER, VERMONT: Probably the FINEST Toy Train Collection East of the Mississippi! 23. Tuesday, October 12: ORLANDO, FLORIDA: Construction, Support Equipment, Aerial Lifts, Forklifts, Trucks & Trailers. 24. DTBA: MIDDLETOWN (FLORIDA), NEW YORK: Late Model Construction, Support, Aerial Lifts,Trucks & Trailers. 25. DTBA: DETROIT, MICHIGAN: Complete Liquidation of Construction & Support Equipment. 26. DTBA: SCRANTON, PENNSYLVANIA: Complete Liquidation of Construction, Support Equipment, Pickups & Stake Trucks, Trailers (It’s Clean!).

LYON MEXICO: Now with FOUR permanent sale sites: MONTERREY, TOLUCA, AGUASCALIENTES & GUADALAJARA! Visit http://www.lyonmexico.com/ for more information.

The Complete Auction And Appraisal Service

ALEX LY N & SON SALES MANAGERS & AUCTIONEERS, INC. Bridgeport, NY 315/633-2944, Fax: 315/633-8010 Syracuse, NY (Evenings) 315/637-8912 www.lyonauction.com 18 BRANCH OFFICES: AKRON, OH (330) 753-3932 • ALBANY, NY (518) 732-2669 • MANASSAS, VA (703) 626-2123 • ATLANTA, GA (770) 537-7386 • BALTIMORE, MD (410) 792-0008 • BRATTLEBORO, VT (802) 722-4727 • CHERRY HILL, NJ (856) 429-9149 • DETROIT, MI (248) 388-0918 • HARRISBURG, PA (717) 273-3737 • LAKELAND, FL (863) 660-0848 • MEMPHIS/NASHVILLE, TN (731) 660-4611 • MOBILE, AL (251) 510-1538 • NEW LONDON, CT (860) 535-8442 • RACINE, WI (262) 886-2778 • TAMPA, FL (813) 777-3273 • WASHINGTON, D.C. (310) 277-9875 • WORCESTER, MA (508) 845-2800

Page 118 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GNSS-Equipped Roadtecs Ensure Precision on Project

The first plane readies for takeoff on the reconstructed Bay Runway. JFK from page 100

point holes. These weather conditions would have made the conventional method of gridding and marking out the runway in time for early March milling difficult to impossible, and made it clear that an alternative method of elevation control would be beneficial. For this job, the fine-milling machines were set at 18 in. (minus1.50 ft.) and the bulk-milling machines were set at 16 in. (minus1.36 ft.). Paving Post 9/11 An unusual aspect of the project, although not unexpected given its

sensitive location, involved security checks carried out by the Secure Worker Access Consortium (S.W.A.C.) on all workers on the job. As a further precaution, the runway itself was sealed off behind fencing, razor wire, and barriers, with only one exit.

4L Equipment Leasing trucks are loaded from Flushing Asphalt LLC with HMA destined for JFK Bay Runway.

A True Stimulus When the job kicked off in the summer of 2009, Gary LaBarbera, president of the Building and Construction Trades Council of Greater New York, thanked Gov. Paterson on behalf of members of the building and construction trades “for recognizing the impor-

tance of large infrastructure projects, particularly in these economic times,” adding that “money invested in this project will translate directly into hundreds of jobs that pay good wages with health insurance and pension benefits for working men and women in our

industry.” The Bay Runway reconstruction has and will continue to create a significant number of jobs, which the Port Authority estimates between 1,000 and 2,500, including those involved in production of concrete and asphalt, construction

and installation of aeronautical lighting as well as support services after the runway was completed. Overall, they estimate the project will have an economic impact of approximately $800 million between various activities and wages. For the project, the Port Authority of New York and New Jersey is contributing $292.4 million, the Federal Aviation Administration (FAA) is providing $83.9 million, and the remaining $15 million comes from the American Recovery and Reinvestment Act (ARRA) of 2009. Intercounty’s contracts with Perini (Intercounty itself, 4L Equipment Leasing, and Flushing Asphalt) total upwards of $40 Million, including all asphalt supply. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Caterpillar Plans Expanding Michael Forsythe Production in Illinois, India Rejoins ARTBA as Director of Finance CATERPILLAR from page 1

(113 to 725 t) models. The 125-ton shovels are expected to be available in 2011 with larger models following in 2013 and 2014. The Aurora plant is likely to gain about 300 jobs through 2014. Caterpillar spokesman Jim Dugan said jobs will be added at the other plants as demand increases, but the Peoria company doesn’t know how many. Caterpillar said these expansions should increase the truck production capacity of the Decatur plant by about 30 percent. That plant produces Caterpillar’s largest mining trucks, including its 400-ton (363 t) model. The truck capacity of the Indian plant will double to help Caterpillar meet increasing

demand in commodity-rich developing regions like Asia. “This investment of nearly $700 million demonstrates our commitment to Caterpillar mining customers around the world,” said Doug Oberhelman, who will become Caterpillar’s CEO in July. “It also is a great example of the job-creation benefits of global trade.” Oberhelman said more than 60 percent of the large mining equipment made at Caterpillar’s Illinois facilities are sold outside the United States. Caterpillar has said it’s seeing stronger demand for its iconic yellow-and-black machinery because the economy has begun to recover from the recession.

What’s going on in your company? We want to know! Give us a call.

Construction Equipment Guide

800/523-2200 or FAX 215/885-2910

The American Road & Transportation Builders Association (ARTBA) announced that Mike Forsythe has returned to the association as the director of finance. He is responsible for managing all accounting, internal/external audit processes, human resources, budgeting and financial reporting. Forsythe served as ARTBA’s controller from October 2001 through March 2006. Prior to returning to ARTBA, Forsythe was chief financial officer of NXL Construction Services Inc., a Richmond, Va.headquartered construction management and surveying firm specializing in transportation projects. He also worked as a revenue agent for the Internal Revenue Service Large and Midsize Business Division where he conducted examinations of tax returns submitted by large corporations and organizations, which include those with extensive subsidiaries, multiple partners and international operations. He began his career as a staff accountant for Avalon Bay Communities, an Arlington, Va., based, publicly traded real estate investment trust, and subsequently worked as a staff accountant for Verestar Corporation, an Oakton, Va., based technology firm.

WANT TO CHANGE YOUR ADDRESS?

WANT INFORMATION ABOUT GOVERNMENT JOBS?

Want to know where to get this information? All kinds of government information are just a click or call away.

1 (800) FED-INFO

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ July 7, 2010 â&#x20AC;˘ Page 119

"ANKRUPTCYÂŹ!5#4)/. &RIDAY ÂŹ*ULYÂŹ THÂŹATÂŹ AM Caliber Contractors â&#x20AC;˘ 50 Front Street

Palmyra, PA (Hershey)

Auction in Conjunction with Jennings

Auction Group

www.jenningsauction.com (717) 268-0020

,ANDSCAPERSÂŹ ÂŹ#ONTRACTORSÂŹ!5#4)/. 3ATURDAY ÂŹ*ULYÂŹ THÂŹATÂŹ AM Maryland State Fairgrounds â&#x20AC;˘ 2200 York Road

Timonium, MD

76ÂŹ#ONTRACTORSÂŹ ÂŹ4RUCKÂŹ!5#4)/. 3ATURDAY ÂŹ*ULYÂŹ THÂŹATÂŹ AM Charlestown Race & Slots

Charlestown, WV Previe update w the latest s in pictures listings and f auction or these s on ou r web sit e!

!"3/,54%ÂŹ!5#4)/. 4HURSDAY ÂŹ*ULYÂŹ NDÂŹATÂŹ AM Sky Line Crane â&#x20AC;˘ 8229 Conner Drive

Manassas Park, VA

Sample Bank Letter: This letter is to confirm that (Bank Name) will honor checks drawn in an amount of (amount) from (Account Number) in the name of (Buyerâ&#x20AC;&#x2122;s Name). Proceeds will be used at the auction to be held on (Date of Auction). WV Lic#1803 & PA Lic# AY002059 & AU003727, VA Lic# 3837 Terms of Sale: Complete Payment on Sale Day with CASH or CASHIERâ&#x20AC;&#x2122;S CHECK. Company or Personal check accepted only if accompanied by a â&#x20AC;&#x153;Current Bank Letter of Guaranteed Paymentâ&#x20AC;?. Visa, MasterCard, American Express and Discover accepted â&#x20AC;&#x201C; a 5% administrative fee charged on all non-cash/non-check purchases. A 10% buyerâ&#x20AC;&#x2122;s premium will be charged on each item under $2,000.

Attend LIVE or Bid ONLINE!

Simulcast online bidding before & during the live auction at

www.EquipmentFacts.com

ÂŹ

WWW GFORCEAUCTION COM #HECKÂŹOURÂŹWEBÂŹSITEÂŹFORÂŹDETAILS

Page 120 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CASE, CAT & JOHN DEERE RENTAL RETURN & JOB COMPLETION AUCTION LATE MODEL CONSTRUCTION EQUIPMENT, FORKLIFTS, AERIAL LIFTS, SUPPORT EQUIPMENT, TRUCKS & TRAILERS NEFF RENTALS PACE LP

WEDNESDAY, JULY 14 @ 10:00 AM DALLAS, TEXAS DIRECTIONS: From DFW Airport – Hwy 183 West to I-820 West to Exit 13 (Saginaw). Bear right onto North 287 (Main St.) go approx. 6 miles turn right on Hick’s Field Road. Go 1/2 mile to sale site on right. Address: 1815 Hicks Field Rd. East Fort Worth TX 76179. (Adjacent to JRP Trucking) NOTE: Selling in this sale will be like new Case Construction Earthmoving Equipment, Plus a Full Slate of Rental Fleet Equipment and a Large Major Cat & John Deere Job Completion. HILITES INCLUDE: RECLAIMING EQUIPMENT: 2007 Terex RS350 Soil Mixers, 2 STRAIGHT FRAME HAUL TRUCKS: (2) 2006 Cat 769D, 10 ARTICULATED HAUL TRUCKS: 2001 Cat D400E-II, (5) Cat D400E, (2) Cat D250E-II, 2006 Terex TA30, 2007 Terex TA27, 17 HYDRAULIC EXCAVATORS: 2007 Case CX210B, 2007 Case CX210 , Case CX210, 2007 Case CX160B, Unused Case CX130, Cat 345BL, 2002 Cat 320CL, (2) 2007 Cat 314CLCR, Cat 312B, Cat E110B, (3) 2005-2003 Komatsu PC300LC-7, 2002 Kobelco SK250LC, JCB 220LC, 2 LONG REACH EXCAVATORS: Kobelco SK210CLR, Volvo EC240BLR, 4 MOTOR GRADERS: 2005 Cat 140H, 2002 Cat 140HMVHP (ripper), JD 770A, 2004 Volvo G746B, MOTOR SCRAPER: Cat 615C, 11 RUBBER TIRED LOADERS: 2007 Case 621D, 2007 Case 221E, Cat 938F, Cat 936F, 2005 Cat 928G, (2) 2006 JD 624J, 2005 JD 544J, 2005 Komatsu WA450, Komatsu WA320, 2005 Hyundai HL740-3, 24 CRAWLER TRACTORS: 2006-2004 Case 850K, (3) 2007 Case 650K (ripper), 2006 Cat D8T, Cat D8R, Cat D8L, 2006 Cat D6NLGP, Cat D6MLGP, 2005 Cat D5NLGP, 2003 Cat D4GLGP, 2005-20042003-2002 Cat D3GXL, (3) JD 550J, (2) 2007 JD 550JLGP, 2006 JD 450J, (2) New Case 650K, Komatsu D20P-6, 21 TRACTOR LOADER BACKHOES: 2003 Cat 430D (4x4), 2007-(2) 2006 Cat 420EIT (4x4), (2) 2005-2004-2002 Cat 420DIT (4x4), 2005 Cat 420D (4x4), Cat 416C (4x4), (2) Cat 416C, Cat 416B (4x4), 2005 JD 310 Super G, 2004-2003 JD 310G (4x4), 2005 JD 310G, 2004 Case 580M (4x4)-II, 2004 Case 580M (4x4), Case 580 Super K (4x4), 2007 Allmand TLB425ESL (4x4), 2 COMPACTORS: (2) Cat 815, 2 ASPHALT ROLLERS: 2007 Case DV202, IR DD158HFA, 7 VIBRATORY ROLLERS: 2003 IR SD122DX, IR SD70D, IR SD40D, Cat CP433C, (2) 2008 Bomag BW124, Dynapac CA12, RUBBER TRACKED SKID STEERS: Bobcat T190, 6 SKID STEERS: 2008-2007-2006 Case 450, 2005 Case 445, 2004 Case 60XT, NH LX665, 8 TELESCOPIC FORKLIFTS: 2005 Terex TH842C, 2006 Genie GTH-636, 2005 Gehl RS8-42, JCB 508C, Lull 644D-34, (2) 2004 Skytrak 6036, Skytrak 6036, 7 ROUGH TERRAIN FORKLIFTS: (3) 2005 JCB 930RT (4x4), (4) 2005 Case 586G (4x4), 3 PIGGY BACK FORKLIFTS: 2004 Palfinger CR55, (2) Maclift, 7 FORKLIFTS: (2) Komatsu FG40Z, Clark C500-80, Clark C500, (2) Toyota 7FGCU25, Mitsubishi FG15, 5 BOOM LIFTS: JLG 80HX, (2) Genie S80 (4x4), (2) Snorkel TB60, 7 SCISSOR LIFTS: (5) 2004 JLG 1930, (2) 2004 Genie GS1930, 2 AIR COMPRESSORS: 2004 IR P185, IR 175, 19 GENERATORS: 2006 Baldor 130kw, (4) 2005 Multiquip GA6HEA, (4) 2005 Multiquip GA36HA, 2004 Multiquip GLW180H, 2005 Atlas Copco QAS78, 2005 IR G3, 2005-2004 Honda EB5000XK2A, (3) 2006 Tsurumi TPG5000H, (2) 2006 Wacker GP5600, 3 WELDERS: (2) 2004 Multiquip GAW180HE, 2004 Multiquip GLW180H, LIGHT PLANTS: 2004 Allmand NL Pro, CONCRETE EQUIPMENT: Qty. Multiquip Mortar Mixers, Qty. Multiquip Concrete Mixers, Target Concrete Grinders, Target Concrete Planers, SWEEPERS: Broce, WATER TRUCKS: 2001 Int’l. 4700 (s/a), DUMP TRUCKS: 2002 Mack (t/a), SERVICE TRUCKS: 1999 Ford F550XL Super Duty (s/a), 3 DETACHABLE GOOSENECK TRAILERS: (2) 2010 Witzco 50T, 2010 Witzco 35T, 5 GOOSENECK TRAILERS: (5) 2007 Progressive 40ft. (t/a), VAN TRAILERS: 2007 Strick 53ft. (t/a), BORING EQUIPMENT: (8) Porta Mole DH5-H1 Horizontal Boring Machines, 2 HYDRAULIC POWER UNITS: New unused Atlas Copco LP9-20 Hydr. Power Unit, New Unused Atlas Copco LP18 Hydr. Power Unit, ATTACHMENTS: Skid Steers: Okada-Atlas Copco-Allied Hydraulic Hammers, Pallet Forks, Fork Frames, 60in.-72in. Buckets, Hay Spears, Thumbs, Rock & Stump Buckets, Grapples, Stump Buckets, Backhoes, Tree Booms, SUPPORT EQUIPMENT: Conveyor Rollers, Safety Flashers, Jumping Jacks, Truck tires, Rims, Pumps, Oil Tank, Conveyor Belt Rollers, Trencher teeth, Dodge Gear Boxes, Aluminum Hubs, Rear Tine Tillers, Log Splitters, Brush Cutters, Engine Hoists, Demo Hammers, Aerators, Sod Cutters, Stump Grinders, Tampers, Edgers, Post Hole Auger, Chain Saw, Combination Hammers, Welders, Qty. Generators, Shop Vacs, Stump Grinders, Drum Sanders, Threaders, Transits, Floor, Tile & Brick Saws, Core Drills, Paint Sprayers, Abrasive Blaster, Floor Strippers, Post Hole Augers, Tillers, Chairs, Grinder, Ridgid Pipe, Pressure Washers: (2) 2010 Easy Kleen Magnum 4000, Qty. MI-TM 1300PSI2500PSI, . TEXAS AUCTION LICENSE: AUCTIONEER #16356 Michael W. Powers SALE SITE PHONE: (817) 847-2071, (863) 660-3613, SALE SITE FAX: (817) 847-2077

Everything sells “AS IS,” “WHERE IS,” everything sells to the highest bidder without minimums or reserve.

Visit us on the Internet at www.lyonauction.com

Oakmont, Pa., Contractor Buys Case’s 250,000th Skid Steer CASE from page 34

Case skid steers digging, hauling, pushing and loading material on job sites in more than 150 countries around the globe.” A. Folino Construction is a major paving contractor in the Pittsburgh area. The company was founded by Dino’s father, Anthony, in 1972 and operates a large equipment fleet, including Case wheel loaders, excavators, loader/backhoes and skid steers for a total of nine products, Dino Folino (C) of A. Folino Construction, Oakmont, Pa., accepts congratulations from Matt Wilson (R) including the new skid steer. Jeff Hood of Groff Tractor, the Case dealer “We’re honored to take deliv- and based in New Stanton, Pa. Folino took delivery of ery of this machine, and we the 250,000th Case skid steer loader during a cereappreciate the attention that mony at the company’s plant in Wichita, Kan. comes with owning the 250,000th Case skid steer,” said Dino Folino. “We’ll put it to The Case 400 Series 3 skid steer loader work right away, like all of our other Case line includes eight models, ranging from 57 equipment. We have Case skid steers on all to 83 net hp (42 to 62 kW) and 1,500 to of our crews — they’re versatile, dependable 3,000 lb. (680 to 1361 kg) rated operating and the operators love them. We’ve been loads. very pleased with all of our Case equipment, For more information, visit and with our Case dealer, Groff Tractor.” www.casece.com. crosswords from page 96

R O

M O R

ALEX LY N & SON

S 34

9 12

31 33

R G

N P

E D

A G

N I

E T

C O

L 26

C O

R N

S 35

A M P E

C O

D Y

R O B

O U

S E

C 15

SALES MANAGERS & AUCTIONEERS, INC.

The Complete Auction And Appraisal Service

Bridgeport, NY 315/633-2944, Fax: 315/633-8010 • Syracuse, NY (Evenings) 315/637-8912 • www.lyonauction.com

A L

L H

L S

I 36

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 121

Online Auction Thursday, July 15

122 Aerial Work Platforms

62 Backhoes

132 Compactors

90 Farm Equipment

202 Forklifts

135 Loaders

119 Skid-Steers

38 Telehandlers

403 Trucks – On-Road

Visit our website to see the complete list of equipment, review the guaranteed inspection reports, and place your bids.

Inspected and Guaranteed www.ironplanet.com s 888-433-5426

Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change.

Page 122 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ABSOLUTE AUCTION Surplus Equipment Frantz Trucking and Excavating Thurs., July 15, 2010 – 9:00AM EDT Brodheadsville, PA

Hydraulic Excavators and Attachments `04 JD 330C-LC, s/n FF330CX082888, JD dsl and hyd drive, e/w 13’ stick, H&H 54” digging bkt, 2964 orig. hrs • Unused H&H 1.18 CY, 30” Digging Bkt (Fits JD 330LC) • `98 CAT 320BL, s/n 6CR03006, Cat 3066 dsl and hyd drive, e/w 9’6” stick, 28” digging bkt, manual quick disconnect, aux hyds • `99 JD 200LC, s/n 500701, JD dsl and hyd drive, e/w 9’6” stick, H&H 42” digging bkt, H&H mechanical thumb • 24” Digging Bkt (Fits JD 200LC) • `89 CAT 215CLC, s/n 4HG02206, Cat 3304DI dsl and hyd drive, e/w 7’3” dipper stick, 36” digging bkt • 24” Digging Bkt (Fits Cat 215CLC) Crawler Loaders `03 CAT 963C, s/n BBD00421, Cat 3126 dsl and hydrostatic trans, gp bkt w/teeth & cutting segments, EROPS w/heat & ac, 17” DBG pads (757 Original Hours) `94 CAT 953B, s/n 5MK1286 • `87 CAT 953 LGP, s/n 20Z01735, Cat 3204 dsl and hydrostatic trans, e/w gp bkt w/teeth, ROPS canopy, and 15” DBG pads

Rubber Tired Loaders and Attachments `99 CAT 938G, s/n 6WS01294, Cat 3126 DITA dsl and ps trans, e/w gp bkt w/teeth, hyd quick disconnect, aux hyds • `95 CAT 938F, s/n 1KM01009, Cat 3116 dsl and ps trans, e/w Balderson gp bkt w/bolt-on cutting edge, hyd quick disconnect, aux hyds • (2) BALDERSON Hyd Side Dump Bkts (938F/938G) • (2) BALDERSON 60” Fork Attachments (938F/938G) • `94 CAT 928F, s/n 2XL00733, Cat 3116DIT dsl and ps trans, e/w gp bkt • `88 CAT 950E, s/n 65R03184, Cat 3304 dsl and ps trans, e/w gp bkt w/teeth • CAT 950B, s/n 31R01444, Cat 3304 dsl and ps trans, e/w Balderson gp bkt w/teeth, Balderson hyd quick disconnect

Crawler Tractors `95 CAT D5HXL Series II, s/n 8RJ04566, Cat 3306 dsl and ps trans, e/w 6-way straight blade • `97 CAT D5CXL Series III, s/n 9DL01864, Cat 3046 dsl and ps trans, e/w 6-way straight blade • CAT D6C, s/n 76A5505, Cat 6 cylinder dsl and ps trans, e/w straight blade w/left tilt Articulated End Dumps `05 KOMATSU HM350-1, 35 Ton, s/n 26001113 • `93 VOLVO A30, 30 Ton 6x6, s/n A30V1249 • `86 CAT D25C, 25 Ton 4x4, s/n 9YC00275 • `87 CAT D25C, 25 Ton 4x4, s/n 9YC00450 Tractor Loader Backhoes `96 JD 310D, 4x4 Extend-A-Hoe, s/n 825224 • `94 JD 310D, 4x4 Extend-A-Hoe, s/n 800459 • `96 CASE 580 Super L, 4x4 Extend-A-Hoe, s/n JJG0198502 Vibratory Compactor, Mobile Sweeper, and Paver `96 IR SD-100D, s/n 147836, Cummins 4BTA3.9C dsl, e/w 84” smooth drum • `90 ELGIN Whirlwind Series L, s/n L0322S • `96 MAULDIN 550E Crawler Paver, s/n 55-9608-133, e/w 8’-11’ vibrating screed Dump Trucks and Tag-A-Long Trailers (2) `97 MACK RD688S Tri-Axle, Mack E7-350 dsl and Eaton Fuller 8LL, e/w Bibeau 17’ steel heated dump body • (3) `95 FORD L9000 Tri-Axle, Cat 3306, 300HP dsl and Roadranger 8LL, e/w 18’ heated steel dump body • `93 AUTOCAR TriAxle, Detroit Series 60, 12.7L 450HP dsl and Eaton Fuller 8LL, e/w Hewey 17’6” alum dump body • `77 FORD 9000 T/A, Cummins 230HP dsl and 8 spd trans, e/w 13’6” steel dump body • `77 FORD T/A, Cummins 230HP dsl and 8 spd trans, e/w 14’ steel dump body • `97 EAGER BEAVER 20XPT, 20 Ton • `96 EAGER BEAVER 10HA, 10 Ton Truck Tractor, Dump Trailers, and Lowboy `87 PETERBILT 379 T/A, Cat 3406B, 400HP dsl and Fuller Roadranger 9 spd trans, e/w 38,000# rears, 12,000# front axle, wetline • `84 PARKER TDA-30R, 30’ T/A • `79 PARKER TDA-28, 28’ T/A • ROGERS 35 Ton T/A Lowboy PLUS: Utility and Pickup Trucks

Please Call (800) 233-6898 or Email sales@hunyady.com For Complete, Descriptive Brochure!

www.hunyady.com PA Auction License No: AY000281 While information is believed to be accurate, all items will be sold “As-Is, Where-Is” without guarantee or warranty. A physical inspection is suggested.

Business Calendar June 29-30, 2010 or September 28-29, 2010 or December 7-8, 2010– Construction Training. AGC St. Louis Professional Development; Construction Quality Management for Contractors. This course familiarizes contractor personnel with Corps of Engineers Construction Quality Management concepts and procedures. Questions, please contact Joanne Engel at (314) 644-1525 ext. 225. July 13, 2010 – Conference Call. Association of Equipment Manufacturers (AEM) Strategic Task Force. July 14, 2010 – Meeting. Association of Equipment Manufacturers (AEM) Finance Committee Meeting, Chicago (O’Hare), Illinois. July 14 to July 16, 2010 – Conference. The Associated General Contractors of America (AGC) Safety and Health Conference. Hyatt Regengy, 151 W. 5th Street, Cincinnati, OH. Construction Safety and Health is vital for the success of the industry. Join more than 150 industry professionals and participate in the development of regulatory and legislative activity on both a national and local level, assist in the development and creation of new safety training programs and product and hear the latest initiatives from OSHA and other industry experts. July 15, 2010 – Picnic. AGC of St. Louis is sponsoring Build-A-Brat-Picnic - Beer, Brats and a Band. What more do you need!?! Hosted by the Construction Leadership Council, Thursday, 7/15/10 from 4:30 to 7:30 P.M. at the Gloria Rogers Pavilion in Tilles Park, South of Hwy. 40 at the corner of McKnight and Litzsinger Road. Live Music, $15.00 per person, price includes bratwursts, sides beer and soda. AGC members will be invoiced or may pay at the door. For questions, contact Kathy Givens at (314) 781-2356. July 19-21, 2010 – Workshop. Illinois Association of Aggregate Producers is hosting a Illinois Teachers Workshop: “Rocks, Minerals & Mining in Today’s Society” at Chestnut Mountain Resort, 8700 West Chestnut Road, Galena, Illinois 61036; telephone: (800) 798-0098. For sign up information or questions, please call: Glenda Schoening or Shawn McKinney (217) 241-1639. July 20, August 18, September 15, 2010 – Golf Outings. The CAM (Construction Association of Michigan) Golf Committee’s 2010 CAM Golf Outing Schedule which features four value-packed outings at remarkable prices include dates June 15 Devil’s Ridge Golf Club - Oxford; July 20 Dunham Hills Golf Club - Harland; August 18 Fieldstone Golf Club - Auburn Hills; September 15 Cherry Creek Golf Club - Shelby Township. For more information and any other questions please contact Diana Brown at (218) 972-1000. July 22, 2010 – Webinar. The Associated General Contractors of America (AGC) Managing Your Construction Project and ConcensusDOCS Administrative Forms. Webinar: 2:00 to 3:30 pm ET...FREE!!! ConsensusDOCS has dozens of administrative forms to help you manage your construction projects, both large and small. July 27 and 28, 2010 – Meetings. Association of Equipment Manufacturers (AEM) Product Safety and Compliance and Liability Seminar Planning Committee Meetings, Four Points Sheraton, Schiller Park, Illinois. October 15-16, 2010 – Show. WHEN Recycling Expo, East, Fishersville, Virginia. Two days of live recycling equipment demonstrations as well as static outdoor and indoor exhibits held at the Augusta Expoland (junction of Routes 81 and 64). For more information, call 800-218-5586 or email mstanley@leepub.com. DONATION - HELP Support IAAP’s Political Activities – The IAAP Political Action Committee (PAC) was created in order to provide financial support for our allies in the Illinois General Assembly. Whether from Chicago or Downstate Illinois, Democrat or Republican, these legislators all have one thing in common – they support bills that help the Illinois aggregates industry and oppose bills that hurt our interests. As the cost of political campaigns continues to rise, we want to ensure that legislators who support this industry can compete and continue to do good work. For that reason, supporting the IAAP PAC is critically important to the future of our industry, your company, and your Association’s political activities. Please consider sending a donation, payable to the IAAP, to: John Henriksen, Secretary/Treasurer, IAAP PAC, 1115 S. 2nd Street, Springfield, Illinois 62704. INFORMATION - The Transportation for Illinois Coalition (TFIC) has published and electronic version of it’s most recent white paper, an analysis of the 2009 capital program. To download a copy of this document, go to the TFIC website: http://www.tficillinois.org, click on publications and open the file entitled Capital Funding for Transportation. Questions? Please feel free to contact John Henriksen, Illinois Association of Aggregate Producers, 1115 South 2nd Street, Springfield, IL 62704. Office: (217) 241-1639. Cell: (217) 8997389. Fax: (217) 241-1641. AGC Volunteer Appreciation - The AGC of St. Louis is grateful for the many members who serve on committees. The time devoted by these individuals and the knowledge they share with the industry in very important to the success of the AGC.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 123

LATE MODEL CONSTRUCTION, LAWN & GARDEN, FORK LIFTS, AERIALS, TRUCK & TRAILER AUCTION UNITED RENTALS TRI SUPPLY

IT’S BIG! (Plus the ALEX LYON & SON ANNUAL HAY CAMP & BARBECUE – FRIDAY NIGHT!)

(IT’S A BIG SALE!) SATURDAY, JULY 17 @ 9:00 AM CANASTOTA (SYRACUSE), NEW YORK DIRECTIONS: 20 miles East of Syracuse. Use Exit 34 (Canastota) off New York State Thruway (I-90), turn right. Sale site is 1/4 mile on left. Address: 601 North Peterboro St., Canastota, NY 13032. (Route 13) NOTE: As in the past, this auction puts together a great line-up of all types of late model equipment, trucks & trailers plus a great time to socialize at the Lyon’s Farm, along with equipment from United Rentals & Tri Supply. VERY EARLY HILITES INCLUDE: 2 ARTICULATED HAUL TRUCKS: 2006 Cat 730, Cat D250D, 20 HYDRAULIC EXCAVATORS: JD 892ELC, JD 690DLC, 2003 JD 330CLC, 2006-2005 JD 120C, 2004 Hitachi 160LC, Hitachi EX120, Komatsu PC200LC-6L, Komatsu PC150LC-6, 2007 Kobelco SK160LC-6, 2003 Bobcat 322, 2003 Bobcat 322, Bobcat 320, 2006 Cat 330CL, 2005 Cat 315CL, Cat EL300, Cat E70B, Samsung SE130LC-2, MOTOR GRADERS: Cat 12G, MOTOR SCRAPER: Wabco Earth Pan 101F, RUBBER TIRED EXCAVATOR: Case 1085B, YARD CRANES: Pettibone 10FM, 25 RUBBER TIRED LOADERS: Cat 988, Cat 980G, Cat 980B, Cat 966G, Cat 966E, Cat 914G, 2006 Cat 904B, JD 444E, JD 344G, 2007 JD 244J, Case 621C, Komatsu WA320-7, 2008-2007 Luigong 835-II, 2004 NH LW170, 2003 NH LW90, Kubota L35, Int’l. 60, (2) Michigan L320, 2 TOOL CARRIERS: Cat IT28F, Cat IT18F, 15 CRAWLER TRACTORS: 2008 Cat D6TXL, 2007 Cat D6RXL-III, Cat D5H, Cat D5, Cat D3C-II, JD 850C, 2003-2002 JD 750CLT-II, 2005-2001 JD 450JLT, JD 450H, 2005 NH DC150B, 2004 Case 1650KWT, CRAWLER LOADERS: Drott/ Massey Ferguson 55256, 20 TRACTOR LOADER BACKHOES: 2004 JD 710G (4x4), JD 410, 2002 JD 310 Super G (4x4), 2003 NH LB90 (4x4), 2005-2004 NH LB75B (4x4), NH 555E (4x4), NH 555 (4x4), 2004 Cat 420 (4x4), Cat 416CIT (4x4), New Terramite T7D, 2 ASPHALT PAVERS: Blaw Knox PF500, Blaw Knox PF500, 2 SOIL COMPACTORS: Cat 825C, Cat 825B, 10 VIBRATORY ROLLERS: (2) Cat CS553, Cat CP553, 2005 Cat CP433E, 2006 Hamm 3307, Hamm 2320D, Hamm 2320, Hypac C850B, TRENCH ROLLERS: 2005 Wacker RT82SC, 18 RUBBER TRACKED SKID STEERS: 2006 Cat 287B, 2005 Cat 277B, 2004 Bobcat T300, 2006-2005 Bobcat T250, 2006-2005 Bobcat T190, 2005 Bobcat T180, 2006 JCB 1110T, 2008 JCB 190T, (2) 2006 JCB 180T, 2005 NH LT185B, Takeuchi TL130, 10 SKID STEERS: Cat 262, 2005 Cat 242B, Gehl 6635SXT, Gehl 5625, Gehl 4500, Gehl 3510, 2005 Bobcat 463, Case 410, 14 TELESCOPIC FORKLIFTS: 2010 JLG G10-55A, (4) New JLG G6-42A, JLG G9-43A, 2006-2005 JCB 506CHL, 2005 JCB 5508, 2001 Lull 1044C-54, Gradall 534D6-42, 8 ROUGH TERRAIN FORKLIFTS: (7) JCB 940 (cab), IR RT7087H-4W (cab), 10 FORKLIFTS: Cat T100D, 2004 Cat GC25K, (4) 2006 Toyota 7FGCU25, (2) 2006 Toyota 7FGCU15, Hyster XL90, Hyster XL80, SCREENING PLANTS: New 2009 Screen Machine Scalper 77C, 6 BOOM LIFTS: JLG 120HX (4x4), 2001 JLG 80HX6 (4x4), JLG 800A (4x4), Genie S40, (2) Skyjack SJKB33N, 28 SCISSOR LIFTS: 2005 JLG 500RTS, 2001 JLG 40RTS, JLG 3369E, (2) JLG 33RTS, (2) JLG 2646E2, (9) 2001 JLG 1932E2, (4) JLG 1932E2, 2005 Skyjack SJ7127, Skyjack 4830, (2) 2004 Skyjack SJIII3229, (3) 2004 Skyjack SJIII3219, AG TRACTORS: JD 8640 (4x4), 5 GENERATORS: (4) New Unused IR G5HE, Cat 60kw, 3 AIR COMPRESSORS: (2) New Sullivan D185Q11JD, IR P130, 2 LIGHT PLANTS: (2) 2005 Amida AL4060D4MH, 10 LAWN & GARDEN TRACTORS: JD 335, JD LT160, JD 210, Kubota T1400, Cub Cadet GT3205, CubCadet 1220, NH GT22, Simplicity Regent, Yanmar GT14, Huskee w/ 46in. deck, 14 COMMERCIAL MOWERS: Kubota ZD28, Kubota 2623, JD 3235B (4x4), 2003 JD 1435 (4x4), 2003 JD G100, Ferris H2225K, Ferris H2223K, Ferris IS300, Cub Cadet Z Force, Cub Cadet Z Force, Jacobsen HR9016, Gravely 460, Exmark Explorer, 2006 F21D, GOLF COURSE EQUIPMENT: (2) Toro Greensmaster 3000 w/ 60in. deck, Toro Greensmaster 3000 – parts Unit, Toro Reel Mower, (2) Reel Mowers, 5 Gang Reel Mower, Turfco F12D Meter-Matic III Top Dresser, Ransomes 72in. Mower, (3) Ryan Aerators, 3 LOADER LANDSCAPE TRACTORS: Cub Cadet 7260 (4x4), Cub Cadet 7254 (4x4), Kubota B7100 (4x4), 3 UTILITY TRACTORS: JD 2210 (4x4), Ford 4400, Massey Ferguson 1020, 2 SWEEPERS: New Terramite TSS48, 1990 Ford H70, BUCKET

TRUCK: 1989 IHC S2500 (s/a), KNUCKLEBOOM DUMP TRUCK: 1999 Mack CL713 Elite (t/a), 2 VAN TRUCKS: 2001 GMC 3500 (s/a), 2004 Mitsubishi FE-HD (s/a), FLATBED DUMP TRUCK: 1993 Ford LNT9000 (t/a), 3 DUMP TRUCKS: 2002 Freightliner FL70 (s/a), 1987 Ford F800, 2002 Ford F650, 6 TRUCK TRACTORS: 2003-2001-2000-1998 Peterbilt 379 (tri.), 2008 Mack CH613 (t/a), 2007 Kenworth W900 (t/a), 3 SERVICE TRUCKS: 2003 Ford F650, 2006 Ford F550, 1998 Int’l. 4700 (s/a), STAKE TRUCKS: 2006 Int’l. 4300 (s/a), CLASSIC AUTOMOBILE: 1975 Ford Thunderbird, 2 TOW TRUCKS: 2000 Ford F550 w/ Century 311 Express Self Loader, 1997 Ford F350 w/8 1/2ft. plow, MAGNETIC AUTO CRANE: 2000 Prentice 410D Articulated, AUTO CRUSHER: 1997 Big Mac, Truck Parts & Accessories: 8FT. Truck Cap, 3 DETACHABLE GOOSENECK TRAILERS: (2) 2010 Witzco 50T, 2010 Witzco 35T, 3 STEP DECK TRAILERS: (3) 1999 Fontaine 48ft. (t/a), 5 CAR HAULERS: (5) 2010 Road Boss 20ft. (t/a), 9 TAGALONG TRAILERS: 2000 Eager Beaver 20ton (t/a), 2001 Phelan 10TAHD 10ton (t/a), (5) New Road Boss 16ft. (t/a), 2000 Econoline BP323DE, Interstate 12ton (t/a), 4 UTILITY TRAILERS: (4) New 12FT. (s/a), (4) 12ft., FLATBED TRAILER: 1999 Utility 45ft., DUMP TRAILER: 2000 J&J 6FT. X 10FT. (t/a), 2 OFFICE TRAILERS: 1999 Beck 45ft., 8ft. x 20f. (s/a), CABLE TRAILER: HydraDyne Corp. 3RC-76-46, 6 FLATBED TRAILERS: (2) New 12ft. Steel, (2) New 10ft. Steel, (2) 9ft. Steel, 2 ROLLOFF CONTAINERS: (2) New 15 yard, UTILITY VEHICLES/ GOLF CARTS: 2006 JD Gator, 2006 ClubCar XRT1500G, 2005 EZ Go ST350G, Sasquath 3 wheel, (9) Yamaha Golf Carts, 4 RECREATIONAL VEHICLES: New 150CC Scooter, (2) New 50CC 4 Wheeler, New 200CC Cheetah, ATTACHMENTS: Skid Steers: Pallet Forks, Fork Frames, 60in. – 72in. Buckets, Thumbs, Hay Spears, Snow & Mulch Buckets, Grapples, Thumbs, Fork Frames, Stump Buckets, Backhoes, Tree Booms, Crawlers: Hyster Winch for D6, Excavators: 48in. Digging Buckets, Loaders: Werk Brau 4-in-1 Buckets, (16) Loader Tires, Wain Roy Buckets, Tractors: 8ft. Landscape Rake, LandPride 48in. Rototiller, SURVEY EQUIPMENT: New Northwest NEXPK99, New CST/Berger CALP26D, SUPPORT EQUIPMENT: 2006 Desco 2500 Tire Cutter (trailer mtd.), Fuel Tanks, Sprayer, Copiers, Chainsaws, Straps, Bottle Jacks, Battery Chargers, Winches, Sockets, Go Karts, Post Hole Diggers, Compressors, Hose Reels, Grinders, Weedeaters, Sandblasters, Grills, Tri-Balls, Generators, Wagons, Tricycles, Trailer Jacks, Welders, Tires, Heaters, Hoists, Lights, Scooters, Scaffolding, Pumps, Fuel Tanks, Concrete Saw, Universal Seats, Impact Wrenches, Chains, Binders, Industrial Tires, Seat Cushions, Pallets of Jumbled Stone, (7) 12-20FT. Snow Pushers, New Mustang Plate Compactors, New Mustang Concrete Vibrators, New Mustang Submersible Pumps, Air Spray Gun Kits, Impact Wrenches, Pintle Hitches, Diamond Blades, Water pumps, Pressure Washers: (2) 2010 Easy Kleen Magnum 4000, (2) 2010 Easy Kleen Magnum Plus, (2) 2010 Easy Kleen Magnum Gold. SALE SITE PHONE: (315) 697-3239, (863) 660-4811

COME TO OUR HOSPITALITY PARTY ON FRIDAY, JULY 16TH!* All Auction attendees are invited to the Alex Lyon & Son Main Farm for a

HUGE BBQ the night before the auction on July 16th at 5PM. Jack personally invites all to come enlist in the famous “Alex Lyon Hay Camp”, see the farm, or enjoy the music… but above all, plan on eating.

It’s sure to be an action-packed weekend that’ll go down in history, so start making your plans.

Everything sells “AS IS,” “WHERE IS,” everything sells to the highest bidder without minimums or reserve.

Visit us on the Internet at www.lyonauction.com

The Complete Auction And Appraisal Service

ALEX LY

N & SON

SALES MANAGERS & AUCTIONEERS, INC.

Bridgeport, NY 315/633-2944, Fax: 315/633-8010 • Syracuse, NY (Evenings) 315/637-8912 • www.lyonauction.com

Page 124 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE ALEX LYON & SON AUCTIONEERS www.lyonauction.com Phone: 315-633-2944 • Albany, NY Sat., July 10, 2010 For: Complete Liquidation of 3 Generations in Business. Excellent Paving, Construction, Support Equipment, Trucks and Trailers

• Richmond, VA Fri., September 17, 2010 For: Complete Liquidation of Late Model Cat Earthmoving Equipment, Trucks , Trailers, Shop Equipment • Atlantic City, NJ Sat. - Sun., September 25-26, 2010 For: Very Large Construction, Forklift, Aerial Truck & Trailer Rental Returns, New Building Supplies

Coming Auctions • Detroit, MI August 25, 2010 • Houston, TX August 26-27, 2010

• Dallas, TX Wed., July 14, 2010 For: Rental Returns of Forklifts, Aerial Lifts, Construction, Support Equipment, Trucks & Trailers

• Saginaw, MI Fri., October 8, 2010 For: Large Construction, Agricultural, Support, Aerial Lifts, Trucks & Trailers

• San Bernardino, CA Thurs., July 15, 2010 For: Late Model Construction, Support, Trucks & Trailers

• Westminster, VT Sun., October 10, 2010 For: Probably The Finest Toy Train Collection East of the Mississippi

• Polotitlan, Mexico September 8, 2010

• Syracuse, NY Sat, July 17, 2010 For: Lyon’s Annual Summer Hay Camp & Friday Night Barbeque: Late Model Construction, Support Equipment, Aerial Lifts, Trucks & Trailers

• Orlando, FL Tues., October, 12, 2010 For: Construction and Support Equipment, Aerial Lifts, Forklifts, Trucks & Trailers

• Los Angeles, CA September 15, 2010

• Cleveland, OH Fri., July 23, 2010 For: Dump Trucks, Truck Tractors, Straight and Pickup Trucks, Drop Decks, Trailers, Support Equipment • Attleboro, MA Sat., July 24, 2010 For: Job Completion Auction of Leased & Fleet Construction Equipment • Rutland, VT Sat., July 31, 2010 For: Logging and Sawmill Operation – Full Line of Skidders, De-limbers, Trucks, Trailers, Support Equipment • Queretaro, Mexico Fri., August 6, 2010 For: Late Model Construction Equipment, Large Quantity of Forklifts, Support Equipment, Trucks & Trailers • Racine, WI Sat., August 7, 2010 For: Construction, Landscape and Support Equipment, Trucks & Trailers • Rochester, NY Sun., August 8, 2010 For: Large Quantity of New & Used Support, Construction Equipment, New Wood, Lumber & More • Buffalo, NY Sat., August 14, 2010 For: Estate Auction: Cranes, Draglines, Buckets, Large Quantity of Support Equipment • Orlando, FL Thurs., August 19, 2010 For: Late Model Rental Returns of Forklifts, Aerial Lifts, Construction, Support Equipment, Trucks & Trailers • Columbus, OH Fri., August 20, 2010 For: Secured Party Sale, Truck Tractors, Van Trailers, Asst. of Construction Equipment

• Middletown (Florida), NY DATE TBA For: Rental Fleet Construction Equipment, Support, Aerial Lifts, Trucks & Trailers • Detroit, MI DATE TBA For: Complete Liquidation of Construction and Support Equipment • Scranton, PA DATE TBA For: Complete Liquidation of Construction, Support Equipment, Pickups & Stake Trucks, Trailers RITCHIE BROS. AUCTIONEERS www.rbauction.com Phone: 402-421-2631 • Truro, NS, CAN July 8, 2010 • Moncofo, Spain July 8, 2010 • Los Angeles, CA July 9, 2010 • Montreal, QC, CAN July 13, 2010 • Chicago, IL July 13, 2010 • Sacramento, CA July 14, 2010 • Caorso, Italy July 15, 2010 • Prince George, BC, CAN July 15, 2010 • Fort Worth, TX July 15-16, 2010 • Istanbul, Turkey July 17, 2010 • Chilliwack, BC, CAN July 21, 2010 • Dubai, United Arab Emirates July 26-28, 2010 • Olympia, WA July 29, 2010

• Houston, TX Wed., August 25, 2010 For: Rental Return Auction of Forklifts, Aerial, Construction, Support, Trucks & Trailers

• Northeast, MD August 3, 2010

• Monticello, NY Sat., August 28, 2010 For: Complete Liquidation of Earthmoving Equipment, Support, Trailers & Trucks

• Torreon, NM August 5, 2010

• Fort Wayne, IN Wed.-Thurs, September 15-16, 2010 For: Construction, Aerial Lift, Forklift, Support Equipment, Trailers, Truck Tractors, Pickups

• Albuquerque, NM August 4, 2010

• Las Vegas, NV August 6, 2010 • Denver, CO August 10, 2010 • Salt Lake City, UT August 17, 2010 • Orlando, FL August 18, 2010

• Phoenix, AZ September 2, 2010 • Edmonton, AB, CAN September 8-9, 2010

• Brisbane, Australia September 14, 2010

• London, ONT, CAN September 15, 2010 • Kansas City, MO September 15, 2010 • Geelong, Australia September 16, 2010 • Oceana, Spain September 16-17, 2010 • Panama City, Panama September 17, 2010 • Moerdijk, The Netherlands September 22-24, 2010 • Orlando, FL October 13-14, 2010 • Moncofa, Spain October 28, 2010

A.J. WILNER AUCTIONS www.ajwauctions.com Phone: 908-789-9999 • Jersey City, NJ Tues., July 20, 2010 For: Champion/Alimak HEK Construction Elevators plus RT Lift & Trucks

BAR NONE AUCTION www.barnoneauction.com Phone: 866-372-1700 • Sacramento, CA Sat., July 10, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., July 23, 2010 For: Commercial Truck and Heavy Equipment Auction • Sacramento, CA Sat., August 14, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Thurs.-Sat., August 26-28, 2010 For: Commercial Truck and Heavy Equipment Auction • Sacramento, CA Sat., September 11, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., September 24, 2010 For: Commercial Truck and Heavy Equipment Auction • Sacramento, CA Sat., October 9, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., October 22, 2010 For: Commercial Truck and Heavy Equipment Auction • Sacramento, CA Thurs.-Sat. November 11-13, 2010 For: Commercial Truck and Heavy Equipment Auction

• San Bernardino, CA Fri., November 19, 2010 For: Commercial Truck and Heavy Equipment Auction • Sacramento, CA Sat., December 11, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., December 17, 2010 For: Commercial Truck and Heavy Equipment Auction BUNCH BROTHERS AUCTIONEERS www.bunchbrothers.com Phone: 270-376-2992 • Middletown, OH Thurs., August 12, 2010 For: SK Construction CAT AUCTION SERVICES www.catauctions.com Phone: 866-750-9432 • Greenwood, NE Thurs., July 29, 2010 For: Agricultural and Construction Equipment DAVIS AUCTIONS www.davisauctionsinc.com Phone: 203-758-4087

INSIGHT AUCTIONEERS www.insightauction.com Phone: 863-386-1225

RYAN AUCTION SALES www.ryanauctionsales.com Phone: 603-491-6159

• Sebring, FL Saturday, July 17, 2010

• Tues., July 27, 2010 @10:00 am Virtual Equipment & Truck Auction

• Sebring, FL Saturday, September 18, 2010

IRAY AUCTIONS www.iraymn.com Phone: 320-968-7230 • Portage, WI Fri., July 16, 2010 • Foley, MN Fri., September 17, 2010 • Portage, WI Fri., October 15, 2010 • Foley, MN Fri., December 3, 2010

IRON PLANET AUCTIONS www.ironplanet.com Phone: 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid! • Thurs., July 8, 2010 For: Construction Equipment • Thurs., July 15, 2010 For: Construction Equipment

• Prospect, CT Thurs., August 12, 2010 For: Quinnipiac Commission Auction – Construction Equipment

MATT MARING AUCTION CO., INC. www.maringauction.com Phone: 800-801-4502

DEANCO AUCTIONS www.deancoauction.com Phone: 601-656-9768

• Apple Valley, MN Thurs., July 15, 2010 For: Complete Liquidation of Melby Landscaping Inc.

• Philadelphia, MS Thurs., July 15, 2010

GLOBAL FORCE AUCTION GROUP www.gforceauction.com Phone: 877-631-0650 • Palmyra, PA Fri., July 9, 2010 For: Construction Equipment • Timonium, MD Sat., July 10, 2010 For: Landscapers & Contractors Auction • Charlestown, WV Sat., July 17, 2010 For: WV Contractors and Truck Auction • Manassas Park, VA Thurs., July 22, 2010 For: Absolute Auction Skyline Crane

HILCO INDUSTRIAL, LLC www.hilcoind.com Phone: 847-313-4747 • Hueysville, KY Thurs., July 15, 2010 For: Large Offering of Surface and Strip Mining Equipment

HUNYADY AUCTION COMPANY www.hunyady.com Phone: 800-233-6898 • Brodheadsville, PA Thurs., July 15, 2010 For: Surplus Equipment from Frantz Trucking & Excavating • Fort Meade, FL Wed. July 21, 2010 For: Sealed Bid Auction – Recently Off-Lease Equipment

NITKE AUCTIONS www.nitkeauctions.com Phone: 715-362-6162 • Marquette, MI September TBA For: CCMO – Mining Equipment, Trucks • Wausau, WI Fri.-Sat, October 22-23, 2010 For: 2-Day Construction Equipment, Truck & Trailer Auction

PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com Phone: 860-642-4200 • Warwick, RI Tues., July 20, 2010 For: Construction Equipment, Cranes & Rigging, Trailers, Forklifts & Tools • Warwick, RI Fri., July 30, 2010 For: Trucks, Trailers, Shop Equipment and New Parts Inventory

RDO AUCTIONS www.rdoauctions.com Phone: 866-536-5189 • ONLINE AUCTION July 20-27, 2010

RITCHASON AUCTIONEERS INC. www.ritchason.com Phone: 800-806-3395

• Tues., August 31, 2010 @10:00 am Virtual Equipment & Truck Auction • Tues., Sept. 28, 2010 @10:00 am Virtual Equipment & Truck Auction • Thurs., October 21, 2010 @ 9:00 am 1st Annual Fall Contractors Auction • Tues., Nov. 30, 2010 @10:00 am Virtual Equipment & Truck Auction • Thurs., Dec. 16, 2010 @10:00 am Virtual Equipment & Truck Auction STOCK AUCTION COMPANY www.stockra.com Phone: 800-937-3558 • Wed., July 14, 2010 BIG IRON Timed Internet Auction ONLY • Wed., July 28, 2010 BIG IRON Timed Internet Auction ONLY • Wed., August 11, 2010 BIG IRON Timed Internet Auction ONLY • Wed., August 25, 2010 BIG IRON Timed Internet Auction ONLY • Omaha, NE Sat., August 28, 2010 For: Fleet Vehicle and Heavy Equipment Auction

TAMPA MACHINERY AUCTION, INC. www.tmauction.com Phone: 813-986-2485 • Tampa, FL Sat., July 10, 2010 • Tampa, FL Sat., August 14, 2010 • Tampa, FL Sat., September 11, 2010 • Tampa, FL Sat., October 9, 2010 • Tampa, FL Sat., November 13, 2010 • Tampa, FL Sat., December 11, 2010

THOMPSON AUCTIONEERS, INC. www.thompsonauctioneers.com Phone: 937-426-8446 • Ashland, KY Tues.-Wed., July 13-14, 2010 For: Ross Brothers Construction and Davis Burton Contractors

UTILITY AUCTIONS www.utilityauctions.net Phone: 302-530-9103 • Wilmington, DE Fri., August 27, 2010 For: Public Auction Construction and Utility Equipment

• Lebanon, TN Sat., September 18, 2010

YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com Phone: 419-865-3990

• Lebanon, TN Sat., December 11, 2010

• Lancaster, NH Thurs., August 26, 2010

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 125

COMPLETE LIQUIDATION AUCTION of ASSETS & EQUIPMENT of L.J. SITE DEVELOPMENT, INC. d/b/a L.J. HEAVY HAULING & ROOFING and L.J. CRANE & RIGGING, INC. (Per Order of Court Appointed Receiver, Jonathan N. Savage, Esq.) TUESDAY, JULY 20, 9:30 AM • 522 JEFFERSON BLVD • WARWICK, RI 02886 MULTI MILLION DOLLAR INVENTORY Including: CRANES: 2008 Grove GMK7550, 550 Ton All Terrain Crane, 53’-197’ 5 Section Boom, 39’-230’ Jib, Main & Aux Winches, LMI System, Mercedes Dsl, Auto, 445/95R25 Tires, Subject To Confirmation, s/n 7450-8064; 2008 Manitowoc 999 Series 3, 275 Ton Crawler Crane, 180’ Boom, 40’ Jib, Main & Aux Winches, LMI System, Cummins QSM11 Dsl, 48” Pads, A/C, To Be Sold Offsite, FOB: Cook, MN, Subject To Confirmation, s/n 999-1246; 2008 Grove GMK4100, All Terrain Crane, 115 Ton Cap, 37’-171’ 6 Section Boom, 33’-56’ Jib, Main & Aux Winches, LMI System, Mercedes Dsl, Auto, 445/95R25 Tires, Upper Hrs Read: 2381, Lower Hrs Read: 796, Subject To Confirmation, Miles Read:11,817, s/n 4100-5181; 2008 Grove GMK4100B, 100 Ton All Terrain Crane, 35’-167’ 6 Section Hyd Boom, 28.5’49’ Jib, Mercedes Dsl, Auto, Main & Aux Winches, LMI System, 445/95R25 Tires, Subject To Confirmation, s/n 40802177; 2006 Potain MR405B, 26 Ton Luffing Tower Crane, 196’10” 6 Piece Jib, 16’5” Tower Sections, Subject To Confirmation, s/n 403356; TRUCK TRACTORS: 2008 Peterbilt 389, T/A, Cummins ISX500, 500 HP, Eaton Fuller 18 Sp, 12K F, 40K R, Air Ride, 63” Sleeper, Engine Brake, Full Locking Diffs, Dbl Frame, Air Slide 5th Wheel, 10 Alum Disc Wheels & Headache Rack, Light Pkg, 11R24.5 Tires, Miles Read:287,171 VIN #1XPXD49X28D746284; 2007 Peterbilt 379, Tri-Axle, Cat C15, 625 HP, 14K F, 20K Tag, 46K R, 72” Sleeper, Air Ride, Dbl Frame, Alum Headache Rack, Alum Full Fenders, 12 Alum Wheels, Air Slide 5th Wheel, 11R24.5 Tires, Miles Read:42,541, VIN #1SP5DBEXX7N636576; 2007 Peterbilt 379, Tri-Axle, Cummins ISX565, 565 HP, Eaton Fuller 18 Sp, 14K F, 20K Tag Axle, 46K R, Air Ride, Airlift 3rd Axle w/11R22.5 Tires, Wetline, 48” Sleeper, Air Slide 5th Wheel, Engine Brake, Full Locking Diffs, Dbl Frame, Alum Deck & Headache Rack, Stainless Steel Full Fenders, 14 Alum Wheels, Light Pkg, 11R24.5 Tires, Miles Read:267,549, VIN #1XP5D4EX57N742428; 2007 Peterbilt 379, T/A, Cat C-15, 475 HP, Eaton Fuller 8LL, 18 Sp, 12K F, 46K R, Air Ride, Full Locking Diffs, Engine Brake, Wetline, 36” Sleeper, Air Slide 5th Wheel, Alum Disc Wheels, Full Fenders & Headache Rack w/Storage, 11R24.5 Tires, Dbl Frame, Miles Read:238,119, VIN #1XP5DB0X97N636575; 2006 Peterbilt 379, Tri-Axle, Cat C-15, 625 HP, Eaton Fuller 18 Sp, 14K F, 46K R, Wetline, Air Ride, Air Lift 3rd Axle w/ 295/75R22.5, Engine Brake, Full Locking Diffs, Dbl Frame, 14 Alum Wheels, Air Slide 5th Wheel, Alum Full Fenders, Deck & Headache Rack, Light Pkg, 11R24.5 Tires, Miles Read:337,109, VIN #1XP5DBEX56N636578; 2006 Peterbilt 379, T/A, Cat C15, 475 HP, 18 Sp, 12K F, 46K R, Air Ride, Wetline, Engine Brake, Full Locking Rears, Alum Headache Rack, 10 Alum Wheels, Air Slide 5th Wheel, Stainless Steel 1/2 Fenders, 11R24.5 Tires, Miles Read:331,569, VIN #1XP5DB0X76N883950; 2006 Peterbilt 379, T/A, Cat C-15, 600 HP, Eaton Fuller 18 Sp, 12K F, 46K R, Air Ride, Wetline, Engine Brake, Full Locking Diffs, Air Slide 5th Wheel, Alum Wheels, Deck & Headache Rack, Stainless Steel 1/2 Fenders, 11R24.5 Tires, Miles Read:312,395, VIN #1XP5DD0X96N637076; 2001 Peterbilt 379, Tri-Axle, Cat C15, 475 HP, 18 Sp, 14K F, 20K Tag, 46K R, Wetline, Sleeper, Air Ride, Full Locking Rears, Dbl Frame, Engine Brake, 12 Alum Wheels, Alum Headache Rack, Alum Full Fenders, Air Slide 5th Wheel, 11R24.5 Tires, Miles Read:648,115, VIN #1XP5DB0X71D571173; 2000 Kenworth W900L, T/A, Cat C-15, 475 HP, Eaton Fuller 18 Sp, 12K F, 46K R, Air Ride, Wetline, 60” Sleeper, Engine Brake, Air Slide 5th Wheel, Alum Headache Rack & 1/2 Fenders, 6 Alum Wheels, 11R24.5 Tires, Miles Read:617,789, VIN #1XKWDB0XY0J862510; 1999 Mack CH613, T/A Mack E7, 427 HP, 8LL, Wetline, Spring Susp, Engine Brake, Alum Headache Rack, Alum 1/2 Fenders, Air Slide 5th Wheel, Miles Read:213,043, VIN #1M2AA18Y6XW110887; 1997 Western Star 4964FX, T/A, Cat C-12, Eaton Fuller 8LL, 10 Sp, 12K F, 46K R, Air Ride, Engine Brake, Wetline, Fixed 5th Wheel, 6 Alum Wheels, Headache Rack, & 1/2 Fenders, A/C, 11R24.5 Tires, Miles Read:617,789, VIN #2WKPDD2G3VK948212; LOWBED TRAILERS: 2008 Fontaine Magnitude 55L, 55 Ton Tri-Axle, Hyd Detach Neck, Air Lift 3rd Axle, 102”x25’ Deck, Non Ground Bearing, Air Ride, 275/70R22.5 Tires, VIN #13NE5230683546337; 2005 Fontaine TL55FLD, 55 Ton Tri-Axle, 102”x25’ Deck, Hyd Detach Neck, Non Ground Bearing, Air Ride, 275/70R22.5 Tires, VIN #4LFE5230X53527263; 2005 Fontaine TH55MDSRW, 55 Ton Tri-Axle, Non Ground Bearing, Detach Gooseneck, 25’ x102” Dropside Deck, Air Ride, Pony Motor, 275/70R22.5 Tires, VIN #4LFE5530353527123; 2002 Fontaine 905MNGB, 90 Ton Tri-Axle Drop Side w/4th Flip Axle, Hyd Detach Neck, Non Ground Bearing, 9’2”x25’ Deck, Air Ride, 275/70R22.5 Tires, VIN #13NE5950723512629; 2000 Fontaine TH55DSR, 55 Ton Tri-Axle Drop Side, Hyd Detach Neck, Non Ground Bearing, 102”x25’6” Deck, 6 Outside Alum Wheels, Air Ride, 275/70R22.5 Tires, VIN #4LF4S533XY3509947; 2000 Fontaine 353WDMRX, 35 Ton T/A, Mechanical Detach Neck, Non Ground Bearing, 8 Alum Wheels, 102”x10’ Top Deck, 102”x7’ Rear Deck, 102”x29’ Ext Deck, Air Ride, 255/70R22.5 Tires, VIN #4LF4H5330Y3508868; 1994 Fontaine 605TICNGB, 60 Ton Tri-Axle Drop Side w/4th Flip Axle, Hyd Detach Neck, Non Ground Bearing, 8 Outside Alum Wheels, 102”x25’6” Deck, Air Ride, 295/75R22.5 Tires, VIN #4LF4S7953R3503347; 1997 Fontaine 352J, T/A Jeep, Mechanical Slide 5th Wheel, 4 Outside Alum Wheels, Air Ride, 295/75R22.5 Tires, VIN #4LF3N2620V3505602; Stinger, Articulated, Air Ride, 2 Outside Alum wheels, 295/75R22.5 Tires; SGL & DBL DROP DECK TRAILERS: 2006 Fontaine EDET78048WSAWK, 48” Sgl Drop, 381x102” Deck, 10’ Upper Deck, Air Ride, Ratchet Spools, 255/70R22.5 Tires, VIN #13N24830661534092; 2006 Fontaine EDFT78048WSAWK, T/A, 48’x102”, Spread Axle, 102”x10’ Top Deck, 102”x38’ Bottom Deck, Air Ride, 225/70R22.5 Tires, VIN #13N24830161534095; 2006 Fontaine RDFT18048WSAWK, 48’x102”, Spread Axle, 38’ Deck, 10’ Upper Deck, Alum Deck w/Steel Frame, Alum Disc Wheels, Ratchet Spools, 225/70R22.5 Tires, VIN #13N24830061532046; 2006 Transcraft DTL3000, 48’ Sgl Drop, 38’ Deck, 10’ Upper Deck, Air Ride, Ratchel Spools, 255/70R22.5 Tires, VIN #1TTEE482061066512; 2000 Fontaine T/A Dbl Drop, Non Ground Bearing, Detach Gooseneck, 29’x102” Deck, 10’ Upper Deck, Outriggers, 255/70/22.5 Tires, VIN #4LF4G5336Y3509512; 1999 Manac 13348905, TriAxle, 102”x12’ Upper Deck, 102”x36’ Lower Deck, Air Ride, 12 Ratchel Spools, 275/70R22.5 Tires, VIN #2M5131466X1060460; 1999 Manac 13348905, Tri-Axle, 12’x102” Top Deck, 36’x102” Bottom Deck, Air Ride, 12 Ratchet Spools, 275/70R22.5, VIN #2M5131466X106457; 1999 Manac 48’x102” T/A Sgl Drop, 38’ Deck, 10’ Upper Deck, Air Ride, Ratchet Spools, 255/70R22.5 Tires, VIN #2M5121462X1058093; 1998 Transcraft DTL2000, 48” T/A Sgl Drop, 37’ Deck, 11’ Upper Deck, Air Ride, 255/70R22.5 Tires, VIN #1TTE48207W1058345; 1998 Transcraft DTL2000, 48’ x102” T/A Sgl Drop, 37’ Deck, 11’ Upper Deck, Air Ride, 255/70R22.5 Tires, VIN #1TTE48209W1058346; FLATBED TRAILERS: 2009 Manac SFB48, T/A, Sliding Tandems, 48’x102”, 12 Ratchet Spools, Spring Susp, 11R24.5 Tires, VIN #5MC2126279K10553; 2009 Manac SFB48, T/A, Sliding Tandems, 48’x102” Deck, Spring Susp, 9 Ratchet Spools, 11R24.5 Tires, VIN #5MC2126249K010784; 2009 Manac SFB-48, T/A, 48’x102” Deck, Sliding Tandems, Ratchet Spools, 11R24.5 Tires, VIN #5MC2126289K010206; 2009 Manac SFB-48, T/A, 48’x102” Deck, Sliding Tandems, Ratchet Spools, 11R24.5 Tires, VIN #5MC21262X9K010207; 2009 Manac SFB-48, T/A, 48’x102” Deck, Sliding Tandems, Ratchet Spools, 11R24.5 Tires, VIN #5MC2126219K010208; 2009 Manac SFB-

48, T/A, 48’x102” Deck, Sliding Tandems, Ratchet Spools, 11R24.5 Tires, VIN #5MC2126259K10552; 2009 Manac SFB-48, T/A, 48’x102” Deck, Sliding Tandems, Ratchet Spools, 11R24.5 Tires, VIN #5MC2126299K10554; 2009 Manac SFB-48, T/A, 48’x102” Deck, Sliding Tandems, Ratchet Spools, 11R24.5 Tires, VIN #2MC2126229K010783; 2006 Transcraft Eagle II, T/A, Spread Axle, Alum Deck, Steel Frame, 53’x102”, 9 Ratchet Spools, Air Ride, 11R24.5 Tires, VIN #1TTF5320062016565; 2006 Transcraft Eagle II NW2S, 53’x102” T/A, Air Ride, Alum Deck, Steel Frame, Ratchet Spools, 295/75R22.5 Tires, VIN #1TTF5320462016553; 2006 Transcraft Eagle II, T/A, 53’x102” Deck, Spread Axle, Air Ride, Alum Deck, Steel Frame, Ratchet Spools, 295/75R22.5 Tires, VIN 2006 Transcraft Eagle II, 53’x102”, Spread Axle, Air Ride, Alum Deck, Steel Frame, 9 Ratchet Spools, 275/80R22.5 Tires, VIN #1TTF5320232016566; 2002 Transcraft Eagle W II 48102, 48’ T/A Spread Axle, Alum Deck, Steel Frame, Alum Disc Wheels, Ratchet Spools, 11R24.5 Tires, VIN #1TTF4820122009005; 1999 Manac 12248101, T/A 102”x48’, Ext Platform, 10 Ratchet Spools, Air Ride, 11R24.5 Tires, VIN #2M5121468X1063539; 1999 Manac 12248101, S/A, 102”x48’, Ext Platform, Air Ride, 8 Ratchet Spools, 11R24.5 Tires, VIN #2M5121464X1063540; 1999 Manac 10248801, T/A, Sliding Tandems, 48’x102” Deck, Spring Susp, 10 Ratchet Spools, 11R24.5 Tires, VIN #2M5121469X1064053; 1999 Manac 12248101, T/A, 48’-80’ Extendable Deck, VIN #2M5121465X1061263; 1994 Great Dane T/A Flatbed, 45’x96” Deck, Ratchest Spools, 295/75R22.5 Tires, VIN #1GRDM9026RM029901; 1991 Fruehauf PBATZW45N, T/A, Spread Axle, 45’x96” Deck, 10 Ratchet Spools, Air Ride, 11R24.5 Tires, VIN #1H2P04524MW043203; 1989 Dorsey T/A Flatbed, Sliding Tandems, 48’x96”, Spring Susp, 11 Ratchet Spools, 11R24.5 Tires, VIN #1DTP16N21KP026616; 1980 Trailmobile T/A Flatbed, 40’x96” Stretch Platform, Spring Susp, 11R22.5 Tires, VIN #7205091179564; ROLLBACK TRUCK: 2000 Peterbilt 330, S/A, Cat 3126, 250 HP, 6 Sp, 10K F, 23K R, Air Ride, 11R22.5 Tires, 6 Alum Wheels, w/Jerr-Dan 610TB 26’ Steel Body, Miles Read:157,469, VIN #1NPNHD7X5YS496267; MECHANICS TRUCKS: 2002 Ford F350, S/A, 4x4, Powerstroke Dsl, Auto, 9’ Body, Ingersoll Rand Air Compressor w/Honda Engine, 235/85R16 Tires, Miles Read:131,934, VIN #1FDWF37F32ED53029; FLATBED TRUCKS: 2000 Ford F550, S/A, V10 Gas, Auto, 14’ Body, Elec Lift Gate, Miles Read:116,694, VIN #1FDAF56SXYEA99347; FLEET VEHICLES: 2009 Ford F150, 4x4, V8 Gas, Auto, Ext Cab, Alum Tool Box, 275/65R18 Tires, Miles Read:32,822, VIN #1FTRX14W29FA79432; 2009 Ford F150 STX, 4x4, Quad Cab, V8 Gas, Auto, 6’ Bed, Alum Tool Box, Running Boards, Pwk Pkg, A/C, Cruise, 275/65R18 Tires, Miles Read:48,005, VIN #1FTRX14W49FA27705; 2009 Ford F150 STX, 4x4, Quad Cab, V8 Gas, Auto, 6’ Bed, Alum Tool Box, Running Boards, Pwr Pkg, A/C, Cruise, 275/65R18 Tires, Miles Read:42,653, VIN #1FTRX14W79K856237; 2008 Chevy 2500 HD, 4x4, Crew Cab, Alum Tool Box, 265/70R17 Tires, VIN #1GCHK23K08F141259; 2008 Chevy 1500 Silverado LS, Ext Cab, V6 Gas, Auto, 6.5’ Bed, Alum Tool Box, Pwr Pkg, Bed Liner, 245/70R17 Tires VIN #1GCEC19X98Z122771; 2008 Ford Expedition, 4x4, V8 Gas, Auto, 3rd Row Seat, Sunroof, 275/55R20 Tires, Miles Read:30,143, VIN #1FMFK20578LA76817; 2007 Chevy 2500HD LS, Crew Cab, 5.3L 8 Cyl Gas, Auto, 6.5’ Bed, Alum Tool Box, & Headache Rack, Tow Pkg, 245/75R16 Tires, VIN #1GCHK23K07F537805; 2007 Chevy Tahoe, V8 Gas, Auto, 4x4, Leather, Sunroof, 3rd Row Seat, 275/55R20 Tires, Miles Read:38,840, VIN #1GNFK13077J316447; 2007 Chevy Silverado, 4.3L Gas, Auto, 8’ Bed, Alum Tool Box, Bed Liner, Fuel Tank w/Elec pump, A/C, Pwr Pkg, 245/70R17 Tires, VIN #1GCEC14X17Z610778; 2007 Chevy Silverado, VIN #1GCEC14X97Z610639; 2007 Chevy Trailblazer, Vortec 4200 Gas, Auto, On-Star System, Sunroof, Tow Pkg, Pwr Pkg, 245/65R17 Tires, VIN #1GNDT13S472297131; 2004 Ford F250, V8 Gas, Auto, 4x4, Aux Fuel Tank w/Elec Pump, Alum Tool Boxes, 235/85R16 Tires, VIN #1FTNF21L54ED82530; FORKLIFTS: Hyundai HLF25-5, 72” Forks, Orops, Side Shift, 3 Stage Mast, 4 Cyl Propane, 7.0-12 F Tires, 6.00-9 R Tires, Hrs Read:916, s/n FU0210796; EXTENSIVE INVENTORY OF CRANE & RIGGING SUPPORT EQUIPMENT, ACCESSORIES & ATTACHMENTS: Miller Bobcat 225 Welder/Generator, Onan Gas; Miller Millermatic 350 Tig Welder; Caldwell 15 Ton Spreader Bars; Drill Press; Tool Cabinet & Bench; Cool Tech 34700Z A/C Freon Recovery System; Cable Slings; Chains; Nylon Slings; Shackles; Knack Job Boxes; Power Tools; Gas Cans; Chain Saws; Truck Parts; Oil Filters, Bolt Bins; Hook Blocks; AND MORE!

Virtually All Auction Inventory in Job Ready Showroom Condition Product of an Exemplary Maintenance Program IMPORTANT NOTE: This auction is per order of the court appointed receiver. Some equipment to be offered “Subject to Confirmation.” Auction inventory subject to change without notice. Please consult our website for updates or important announcements.

COMPLETE LIQUIDATION AUCTION of JM EQUIPMENT & TRANSPORTATION, INC. & Affiliated J&J EQUIPMENT LLC FRIDAY, JULY 30TH, 9:30 AM • 95 RYE STREET, BROAD BROOK, CT 06016 OVER 550 MAJOR PIECES FROM ONE OF CT’s MOST RESPECTED RENTAL COMPANIES TRUCKS, TRAILERS, SHOP EQUIPMENT & NEW PARTS INVENTORY EXCAVATION EQUIPMENT: TELESCOPIC BOOM & FORKLIFTS: SCISSOR LIFTS: PERSONNEL & MATERIAL LIFTS: GENERATORS: COMPRESSORS: TRENCHERS: HEAVY HAULER TRUCK TRACTORS: LOWBED & RECOVERY TRAILERS: SERVICE TRUCKS: EXTENSIVE NEW REPLACEMENT PARTS & SUPPLY INVENTORY: REPAIR EQUIPMENT & TOOLS: SHOP & OFFICE FIXTURES: AND MORE!

TERMS: Complete payment or a minimum requirement of 20% deposit day of sale in Cash, Certified Check or Guaranteed Funds. Balance due within 4 days.

ONLINE BIDDING THROUGH EQUIPMENTFACTS.COM AVAILABLE

CALL FOR INFORMATION AND PICTURE BROCHURES. Salt Lake City, UT (801) 355-4500 Wharton, NJ (973) 659-3330 Milford, NH (603) 672-4100

Columbus, OH (614) 444-4300 Providence, RI (401) 455-0200 Boston, MA (617) 427-8888

275 Route 32, North Franklin, CT 06254, (860) 642-4200, Fax: (860) 642-7900 www.petrowskyauctioneers.com

Page 126 â&#x20AC;˘ July 7, 2010 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

!"3/,54% !5#4)/. 4HUR ÂŹ*ULYÂŹ NDÂŹATÂŹ AM Skyline Crane

ÂŹ#ONNERÂŹ$R ÂŹ-ANASSASÂŹ0ARK ÂŹ6!

Topconâ&#x20AC;&#x2122;s AT-B Series Auto Levels Set New Standards

Online Bidding at EquipmentFacts.com

Very Preliminary Listing! Full Listing Online! P&H 440 TC 40 Ton Track Crane, S/N: 33239, both engines recent rebuilt, currently disassembled for pain, Detroit 671 lower, Detroit 453 upper, sold w/no boom P&H 435 40 Ton Truck Crane, S/N: 29164, Detroit Dsl upper & lower, w winches, sold w/ 130â&#x20AC;&#x2122; main boom, 30â&#x20AC;&#x2122; Jib P&H 565 40 Ton Truck Crane, S/N: 22664, 855 Cummins upper, Cummins lower 2 winches, sold w/130â&#x20AC;&#x2122; Main boom, 30â&#x20AC;&#x2122; Jib Manitowoc #18 Boo, S/N: 12105, 150â&#x20AC;&#x2122; Working Boom w/Ferris Wheel & Pendants Line Manitowoc #9 Boom, (2) 30â&#x20AC;&#x2122; Sections Terms Of Sale: Complete Payment on Sale Day with CASH or CASHIERâ&#x20AC;&#x2122;S CHECK. Company or Personal check accepted only if accompanied by a â&#x20AC;&#x153;Current Bank Letter of Guaranteed Paymentâ&#x20AC;?. Visa, MasterCard, Discover & American Express accepted â&#x20AC;&#x201C; a 5% administrative fee charged on all non-cash/non-check purchases. BUYERS PREMIUM of 10% will be charged to buyer on each lot $2,000.00 and under. Sample Bank Letter: This letter is to confirm that (Bank Name) will honor checks drawn in an amount of (Amount) from (Account Number) in the name of (Buyerâ&#x20AC;&#x2122;s Name). Proceeds will be used at the auction to be held on (Date of Auction).

ÂŹ

WWW GFORCEAUCTION COM

The AT-B series can focus on objects at 7.9 in. (20 cm) in front of the telescope.

Sealed Bid Auction Recently Off Lease Equipment Bid Deadline: Wed., July 21, 2010 5:00PM EDT Fort Meade, Florida Hydraulic Excavators

Crawler Tractors `05 CAT D8R Series II, s/n 6YZ02023 â&#x20AC;˘ `05 KOMATSU D375A-5, s/n 18368 â&#x20AC;˘ `05 KOMATSU D275AX-5, s/n 20195 â&#x20AC;˘ `05 KOMATSU D275AX-5, s/n 20193 â&#x20AC;˘ `05 KOMATSU D275AX5, s/n 20194

`05 CAT 345BL Series II, s/n AGS02689 â&#x20AC;˘ `05 CAT 345BL Series II, s/n AGS02688

Motor Grader and Rubber Tired Loader `04 KOMATSU GD555-3C, s/n 51023 â&#x20AC;˘ `05 K O M AT S U WA500-3LK, s/n A72245

Please Call (800) 233-6898 or Email sales@hunyady.com For Inspection Details, Additional Information, and Bid Kit!

www.hunyady.com FL Auction License No.: AB2215 While information is believed to be accurate, all items will be sold â&#x20AC;&#x153;As-Is, Where-Isâ&#x20AC;? w/out guarantee or warranty. A physical inspection is suggested.

Topcon Positioning Systems (TPS) has released new AT-B series auto levels. â&#x20AC;&#x153;Since the introduction of the first auto level AT model in 1961, Topcon has been a world leader of auto level technology for 50 years,â&#x20AC;? said LeRoy Sorenson, TPS product marketing manager. â&#x20AC;&#x153;Since 1990, the previous AT-G series has been the bestseller models for more than two decades. The new ATB series sets a new standard for auto levels used in surveying, engineering and construction applications.â&#x20AC;? The AT-B series can focus on objects at 7.9 in. (20 cm) in front of the telescope, while previous models provided 1.6 or 3.3 ft. (.5 or 1 m) minimum focusing distance. â&#x20AC;&#x153;This feature dramatically facilitates the works in confined spaces,â&#x20AC;? said Sorenson. The compensator of AT-B series incorporates four suspension wires made of hightensile metal that features minimal thermal expansion coefficient, â&#x20AC;&#x153;providing unmatched durability and accuracy even in the harshest environmental conditions,â&#x20AC;? said Sorenson. â&#x20AC;&#x153;Its finely tuned magnetic damping system quickly levels and stabilizes the line of sight despite the fine vibrations present when working near heavy equipment or busy roadways.â&#x20AC;? With the IPx6 rating, the instrument is protected against powerful water jets from all directions, â&#x20AC;&#x153;meaning the AT-B series

withstands a sudden shower or torrential rainfall.â&#x20AC;? Sorenson said, â&#x20AC;&#x153;The advanced protection design not only prevents water penetration, but also deters clouding or condensation inside the telescope. â&#x20AC;&#x153;With the AT-B series, we have streamlined the product lineup to make usersâ&#x20AC;&#x2122; choices as simple as possible. The three selected models will satisfy all levels of requirements from surveying to engineering, from use in open field to underground,â&#x20AC;? said Sorenson. The three models available are: â&#x20AC;˘ AT-B2: 32x magnification (40x optional), 0.7mm accuracy (0.5mm with an optional micrometer) â&#x20AC;˘ AT-B3: 28x, 1.5mm accuracy â&#x20AC;˘ AT-B4: 24x, 2.0mm accuracy (Accuracy specifications are based on 1km double-run leveling.) Other features of AT-B series include: â&#x20AC;˘ Superior telescope design provides clear and bright view â&#x20AC;˘ 2-speed focus (AT-B2 model) â&#x20AC;˘ Horizontal circle is covered for protection against dirt and scratching â&#x20AC;˘ Optional accessories include diagonal eyepiece, 40x eyepiece (AT-B2) and optical micrometer for 0.1mm or 0.001ft. readings (AT-B2) For more information, call 925/245-8300 or visit www.topconpositioning.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 127

JOB COMPLETION AUCTION OF LEASED EQUIPMENT Fleet Construction SATURDAY, JULY 24 @ 9:30 AM ATTLEBORO, MASSACHUSETTS (RHODE ISLAND BORDER) (For convenience – sale to be held at Sterry Street Towing.) DIRECTIONS: From Providence: I-95 N for 4.8 miles, exit 29 for Broadway, slight right at Broadway for .7 miles, right at Benefit Street for .8 miles, slight left at Cottage Street .6 miles. Continue onto County St., right at Rice Street. Site will be on the right. From Foxborough: I95 S 11.9 miles, exit 2A to merge onto MA 1A S/ Newport Ave. for .9 miles. Left at Cottage Street .3 miles. Continue onto County St., right at Rice Street. Site will be on the right. Address: 24 Rice Street, Attleboro MA 02703. NOTE: Selling will be leased from a major job completion of fleet construction. The following equipment is work- ready and will sell at absolute auction. EARLY HILITES: 13 HYDRAULIC EXCAVATORS: 2002-2001 Cat 345BL, (3) 2004 – (2) 2003-2002 Cat 330CL, 2003-2001 – 2000 1999 -1998 Cat 330BL, RUBBER TIRED EXCAVATORS: Cat M318, MOTOR GRADERS: Cat 120H (VHP), 3 INTEGRATED TOOL CARRIERS: 2003-(2) 2002 Cat IT62G (all have bucket & forks), 2 RUBBER TIRED LOADERS: Cat 988F-II, Cat 980G, 8 CRAWLER TRACTORS: 2002 Cat D8R (cab), Cat D8R (cab), 2000 Cat D6RXL, Cat D5MXL, (2) 2004-2002 Cat D5GXL (cab), 2004 Cat D5G, 7 HAUL TRUCKS: Cat D400D, (3) 2000 Cat D350E-II, Cat D350D, (2) Cat D25D, WATER WAGONS: Cat D35C, 10 TRACTOR LOADER BACKHOES: (4) 2005-(2) 2003 JD 710G (4x4), 2002-2001-(2) 1998 JD 710D (4x4), 9 VIBRATORY ROLLERS: 2003 Cat CS563E, (2) 2005 Cat CS533, 2004 Cat CB334E, 2005 Cat CB534D, (3) IR SD110D, Bomag BW5AS, 2 TRUCK TRACTORS: 2000-1995 Autocar (t/a), SERVICE TRUCK & LARGE QUANTITY SUPPORT EQUIPMENT & ATTACHMENTS: Skid Steers: Pallet Forks, Fork Frames, Buckets, Thumbs, Hay Spears, Mount Plates. MASSACHUSETTS AUCTIONEER LICENSE #: 2065 /AUCTIONEER: Wayne Chevrier

LOGGING & SAWMILL OPERATION: FULL LINE OF SKIDDERS, DELIMBERS, PRENTICE LOG LOADERS, SAWMILL, TRUCKS, TRAILERS & SUPPORT EQUIPMENT. SATURDAY, JULY 31 @ 9:30 AM RUTLAND (SOUTH LONDONDERRY), VERMONT

EARLY HILITES: FELLER BUNCHER: 2003 Timberking TK711HD w/ Cat 22in. Hop Saws, LOG LOADER: Prentice E410 CTR Slasher/ CTR 450 Pull Through Delimber mtd. on Evans HD48 (t/a) trailer, LOG SKIDDER: 2003 Timberjack 660D w/ Dual Arch Continuous Grapple, CHIPPER: Morbark 27 27in. capacity enclosed operator station (t/a), COMPLETE SAWMILL, RUBBER TIRED LOADER: 1999 JD 644G w/ JRB Quick Coupler – Forks Sell Separately, Cat 950F-II w/ Pemberton Quick Coupler – Forks Sell Separately, HYDRAULIC EXCAVATORS: 2004-2001 Cat 312CL, DUMP TRUCK: 2000 Western Star 4964FX W/ 17 1/2 ft. box (tri.) – salvage, TRUCK TRACTOR: 1999 Western Star 4964FX Day Cab (tri.), DUMP TRAILER: Steco 22ft., 4 CHIP BOX TRAILERS: Strick 45ft. (t/a), Fruehauf 48ft. (t/a), Manac 45ft. (t/a), Budd 45ft. (t/a), 2 LOG TRAILERS/ SLASHER: 1998 Manac 45ft. (t/a), 1981 Deloupe 45ft. (tri.), DETACHABLE GOOSENECK TRAILER: Talbert 35 ton (t/a), EQUIPMENT TRAILER: Eager Beaver 20XPT 20 ton, GENERATOR: Onana 500kw, SAND SCREEN: Astec, ATTACHMENTS: Skid Steers: New Hay Spears, Grapples, Tree Booms, Buckets, Fork Frames, Stump Buckets, Backhoe, Tree Boom, Tree Shear.

Many More Items to Come! - Please keep checking our website for more details as we receive them @ www.lyonauction.com VERMONT AUCTIONEER LIC.: 057-0002300, Jack Lyon.

Everything sells “AS IS,” “WHERE IS,” everything sells to the highest bidder without minimums or reserve.

Visit us on the Internet at www.lyonauction.com

The Complete Auction And Appraisal Service

ALEX LY

N & SON

SALES MANAGERS & AUCTIONEERS, INC.

Bridgeport, NY 315/633-2944, Fax: 315/633-8010 • Syracuse, NY (Evenings) 315/637-8912 • www.lyonauction.com

Page 128 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Dave

Barry

Mr. Language Person: Idiot’s Guide to Englesh

UPCOMING AUCTIONS Tuesday July 27, 2010 @10:00 am Virtual Equipment & Truck Auction Tuesday August 31, 2010 @10:00 am Virtual Equipment & Truck Auction Tuesday September 28, 2010 @10:00 am Virtual Equipment & Truck Auction

www.ryanauctionsales.com LIVE VIRTUAL AUCTIONS Go Virtual! Do it Online, Save Money, Save Time! Auctions Held Every Last Tuesday of Every Month

Public Auction Construction and Utility Equipment

Friday, August 27th Auction Location:

@ 9:00 AM 601 Christiana Ave. Wilmington, DE 19801

Please call (302) 654-1846 or

Marty Piela @ (302) 530-9103 for more information Inspection on August 25th & 26th from 8am²5pm

Visit our website for a list of inventory & pictures

www.utilityauctions.net Fleet vehicles from Delmarva Power, Con Edison, Orange & Rockland, South Jersey Gas, DE River & Bay Authority, City of Wilmington & others

To consign equipment to this auction please contact Marty Piela @ (302) 530-9103 Financing can be provided by Northern Atlantic Financial, LLC JoAnn Cucciarre: Office 800-710-4361 Cell 610-909-8023. All financing must be pre-approved prior to the auction

It is time once again for Ask Mister Language Person, the column that provides you with the grammar, punctuation and vocabulary skills you need to verbally crush your opponents like seedless grapes under a hammer. Today’s first language question comes from author Joyce Carol Oates, who writes to ask: Q. At restaurants, I often order the soup du jour. My question is, what is “jour?” A. It is a French word meaning “Bat spleens.” Q. Speaking of restaurants, can you give an example of pretentious menu language? A. Yes. We were dining recently with Mrs. Language Person at the Biltmore Hotel in Coral Gables, Fla., and the menu listed the following item, which we are not making up: “Chef’s Daily Inspiration of Soup.” When the waiter came around, we asked him: “What is the Chef’s Daily Inspiration of Soup?” And he answered, quote: “It’s the soup of the day.” Q. I have a question about the correct pronunciation of the word “aunt.” I say it’s pronounced “aunt,” but my husband insists that it’s “aunt.” Who is right? We argue about this all the time. Also I’m pretty sure he’s sleeping with his secretary. A. According to the American Association of English Professors of English, the correct pronunciation is “nuclear.” Q. Like many people, I am trouble by the part of “Humpty Dumpty” that goes: “All the king’s horses and all the king’s men, couldn’t put Humpty together again.” Why does it mention horses? Does anybody seriously believe that if a bunch of horses saw a giant egg broken into pieces, their response would be: “Hey. Let’s try to reassemble this?” Also, in “Cinderella,” are we really supposed to believe that the prince — this guy who danced with Cinderella all night and wants to MARRY her — believes that the only way he can recognize her is to make her TRY ON A SHOE? As if a shoe is some kind of medieval DNA sample? So if Cinderella’s foot swells up, the prince is going to say: “Well, you LOOK exactly like the woman I love, but the shoe never lies.” A. You have given this a lot of thought. Q. At least once a day, my phone rings, and I answer it, and the person on the other

end — the person who called ME — starts the conversation by asking: “Who is this?” Is that rude? A. It most certainly is, because this person is committing the grammatical “faux pas” (literally, “bat spleen”) of using a pre-emptive connubial pronoun in an infricative phrase. The proper wording is: “Whom is this?” Or, more formally: “Just exactly whom the heck is this to whom I am speaking to?” Q. I would like to use the word “synergy” more often. What does it mean? A. “Synergy” is one of the key words used by business professionals to indicate that they have no clue as to what business they are actually in. (“The Harbingle Organization: A Paradigm of Synergy”). Q. Is it time now for examples of actual language sent in by alert readers? A. Yes. • Veronica Peterson sent a newspaper ad for a Watertown, N.Y., dental clinic offering “Personalized Dentures.” • Bob Emerick sent an ad for a fundraising dinner in Tampa, Fla., with this headline: “Shaquille O’Neal Attacks Literacy.” • Ed Lacy reports that he saw a sign in the men’s room of an Office Depot that said: “EMPLOYEES MUST WASH YOUR HANDS.” (Ed writes: “I waited 15 minutes for someone to wash my hands.”) • Susan Tudor sent an article from the Anderson, Ind., Herald Bulletin, headlined: “MINORITIES IN SHORT SUPPLY.” • John Noren sent an informational document from the Internal Revenue Service containing this statement: “The definition of a child living at home is a child who lives at home.” • Bill Belt sent a letter that his elderly mother received from BlueCross BlueShield that begins with this cheerful and personal salutation: “Dear Catastrophic Member.” • K. Houser sent an article on shark attacks from USA Today, quoting a shark expert as follows: “To have shark attacks, you have to have people together with sharks in the water.” Q. You need BOTH? A. Yes. To create synergy. © 2010 Tribune Media Services Inc. (This article first appeared June 8, 2003).

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 129

CONSTRUCTION AUCTION QUINNIPIAC COMMISSION AUCTION MANAGED BY DAVIS AUCTIONS, INC. SATURDAY, July 31, 2010 9:00 A.M. LOCATION: DAVIS AUCTIONS, INC. 210 CHESHIRE ROAD, RT. 68, PROSPECT, CT THINK SUNSHINE!!!

Quinnipiac Commission Auction will be conducting our next auction of utility and construction equipment and related supplies on July 31, 2010. This auction will consist of equipment from utility companies; municipalities; contractors; and others. All equipment from crushing operation, utility companies, and municipalities are sold in absolute.

Early Consignments: Contractor Selling Out Complete Crushing Operation: DRESSER 555 5 1/2 yd. Wheel Loader, s/n 3663, shows 1500 hrs; DRESSER 555 5 1/2 yd. Wheel Loader, s/n 3567, shows 1700 hrs; DRESSER 550 5 1/2 yd. Wheel Loader, s/n 2235, shows 3250 hrs; MDI/YUTANI 180LC Hyd. Excavator, s/n 371, shows 3500 hrs; MDI/YUTANI MD320BLC Hyd. Excavator, s/n 371, shows 6400 hrs; AKERMAN H16D Hyd. Excavator, aux. hyd., s/n 8063, shows 9600 hrs; STANLEY MB4900 Hyd. Hammer adapted for H16 Excavator; INGERSOLL RAND SP48 Vibratory Roller, s/n 6210S, shows 620 hrs; KOMATSU D39EX21A Crawler Dozer, EROPS, A/C, 6 way blade, s/n 1543, shows 824 hrs; INTERNATIONAL/DRESSER TD8E Crawler Dozer, OROPS, 6 way blade; INTERNATIONAL/DRESSER TD20 Crawler Dozer, hyd. tilt, excellent undercarriage; INTERNATIONAL/ DRESSER 125E Crawler Loader, OROPS, 4 in 1 bucket; KOMATSU WB150 Wheel Loader Backhoe, EROPS, extend-a-hoe, 4x4, s/n A60124, under 800 hrs; VOLVO BM20 3 axle Articulating Rock Truck, s/n A20Z1237; EUCLID R22 Rock Truck, s/n 5045; EUCLID R22 Rock Truck; INGERSOLL RAND 1100CFM Compressor; INGERSOLL RAND ECM350 Air Track Drill; POWER SCREEN 2 Deck Portable Screening Plant w/side conveyor, diesel; BROWN LENEX 52” Cone Crusher, electric, on 2 axle trailer; BROWN LENEX 36”x42” Jaw Crusher w/42”x16’ feeder deck, Cat 3306 power, on 3 axle trailer; WSW 3 Deck 6’x16’ Screening Plant, electric, on single axle trailer; POWER SCREEN Portable 30”x70’ Radial Stacking Conveyor; 24”x65’ Portable Radial Stacking Conveyor; 24”x65’ Portable Radial Stacking Conveyor; 42”x60’ Stationary Conveyor; 30”x60’ Stationary Conveyor; 36”x50’ Stationary Conveyor; Several Other Misc. Small Conveyors, some w/shaker screens; CAT 3412 Generator, skid mounted, 1200KW 265/460V.3Ø4W, s/n 620-9007R, shows very low hrs; Commercial Concrete Forms- over 500 pieces; 100 ton 2FT6011 Truck Scale, (3) 10’x20’ sections; Tree Spade for 3 yd. loader; Staging; Grubber Blade for dozer and much much more. The above crushing operation has very low hours and has been sitting idle for the past few years. You name it, it looks like it’s coming!! More arriving daily. This is our early tentative list. Call for updated list towards the end of July. We accept consignments up thru WEDNESDAY prior to sale. We never know what will be consigned at the last minute – so come to our inspection and find out! INSPECTION: FRIDAY, July 30, 2010

This is when/where you find out what is really here!!!

9:00 A.M. – 5:00 P.M.

TERMS: CASH OR GOOD CHECKS WITH IDENTIFICATION. ABSENTEE BIDS ACCEPTED.

Website list frequently updated. If you don’t see what you want here, visit website for updates. Call for more information: DAVIS AUCTIONS, INC. (203) 758-4087 or 1-800-201-4368 www.davisauctionsinc.com

Auctioneer: Reginald Lussier Lyndonville, VT 05851 NH License# 2413

Page 130 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX AIM ATTACHMENTS ..............................................72

FOLCOMER EQUIPMENT CORP ..........................43

NPK CONSTRUCTION EQUIPMENT INC ............75

ALBAN TRACTOR CO INC ......................................6

FOLEY INC ..............................................................9

OKADA AMERICA ..................................................78

ALEX LYON & SON INC

G & H SERVICE INC ........................................41,72

OPDYKE INC ..........................................................49

PLAN AHEAD CALENDER ............................117

GEHL PAVER ..........................................................62

PENN JERSEY MACHINERY ..................................5

DALLAS TX 07/14/10 ....................................120

GEITH INC ..............................................................81

PETERSON PACIFIC CORP ..................................45

CANASTOTA 07/17/10 ..................................123

GEORGE & SWEDE SALES ..................................38

PETROWSKY AUCTIONEERS INC

ATTLEBORO MA 7/24

GLOBAL FORCE AUCTION GROUP

RUTLAND VT 7/31/10....................................127

MANASSA VA 7/22/10....................................126

WARWICK RI 07/20/10 ..................................125 PINE BUSH EQUIPMENT CO ................................17

ALEX PARIS CONTRACTING CO INC ..................23

HERSHEY PA 07/09/10..................................119

ALL ERECTION & CRANE RENTALS ....................47

GOMACO CORP ....................................................58

ALL ISLAND EQUIPMENT CORP ............................7

GROVE WORLDWIDE (CRANE) ........................109

ALLIED CONSTRUCTION PRODUCTS ..........71,83

HALE TRAILER BRAKE & WHEEL ........................18

ALPINE SALES AND RENTAL CORP ....................39

HARTER EQUIPMENT INC ....................................12

ASPHALT CARE EQUIPMENT ..............................58

HO PENN ..............................................................111

ATLANTIC TRACTOR LLC ....................................16

HOFFMAN EQUIPMENT INC ................................19

BAGELA USA ..........................................................58

HOOBER INC ........................................................50

BARGAINS ............................................................112

HOWELL TRACTOR ............................................110

RSC EQUIPMENT RENTAL ..................................43

BINDER MACHINERY CO ........................................3

HUNYADY AUCTION CO

RUDD EQUIPMENT CO ........................................39

PLASTERER EQUIPMENT CO INC ......................10 PUCKETT EQUIPMENT ........................................60 RANSOME CAT ........................................2,39,45,48 RITCHIE BROS AUCTIONEERS ..........................132 ROAD BUILDERS MACHINERY ............................48 ROADTEC ..............................................................61 ROSCO MFG CO ..................................................65

RYAN AUCTION SALES

BLUE DIAMOND EQUIPMENT ..............................77

BRODHEADSVILLE PA 07/15/10 ..................122

BOBCAT COMPANY ..............................................66

SEALED BID 07/21/10 ..................................126

ONLINE AUCTION 7/27/2010........................128

BODINE MFG ........................................................48

HYUNDAI CONSTRUCTION EQUIPMENT ..........107

SAKAI AMERICA INC ............................................55

BREAKER TECHNOLOGY INC ..............................84

INDEXATOR ............................................................79

SALVAGE DIRECT INC ..........................................43

CAPITAL TRACTOR INC ........................................38

IRON PLANET

STONE CONSTRUCTION EQUIPMENT INC ........64

CEG SCALE MODELS ..........................................92

ONLINE AUCTION JULY 15TH ....................121

STU HARRIS ........................................................116

CHADWICK-BAROSS ............................................13

JCB INC ................................................................103

T-QUIP SALES & RENTAL INC ..............................31

CLASSIFIED ........................................................113

JESCO ..............................................................21,111

TAKEUCHI ..............................................................88

CLAYTON BLOCK & SUPPLY ................................26

JFW EQUIPMENT INC ..........................................60

TEREX COMPACT ................................................95

CLEVELAND BROTHERS EQUIPMENT CO ..........28

JOHN DEERE SKID STEER ................................101

TEREX LOADER BACKHOES ............................104

CONEXPO ..............................................................52

K W REESE INC ....................................................47

TEREX TRUCKS ....................................................98

CONSTRUCTION EQUIPMENT GUIDE ..........68,86

KEARNS BRINEN & MONAGHAN INC ..................24

TOPCON POSITIONING SYSTEMS ......................51

COR EQUIPMENT SALES ....................................51

KEESLER DIVISION OF STEPHENSON ..............11

COSTANZI CRANE & RIGGING CO INC................45

KEIL EQUIPMENT CO INC ....................................48

CRANE MATS NORTHEAST ..................................50

KUBOTA ................................................................105

CREAN EQUIPMENT ..........................................110

LABOUNTY MANUFACTURING INC ....................73

DANELLA USED TRUCKS & EQUIPMENT ............24

LBX ........................................................................99

DAVIS AUCTIONS INC

LEEBOY ..................................................................63

TRACEY ROAD EQUIPMENT INC ..................25,36 TRANSPORT EQUIPMENT SALES ......................25 TRENCH SHORING SERVICES ............................36 UTILITY AUCTIONS INC WILMINGTON DE 06/25/10 ..........................128 VANTAGE EQUIPMENT ........................................15

QUINNIPIAC COMMISSION 07/31/10 ..........129

LIEBHERR EQUIPMENT ........................................93

DOOSAN INFRACORE AMERICA ........................87

LIUGONG ................................................................85

DYNAPAC ..............................................................59

LUCKY’S TRAILER SALES ....................................16

VERNON E STUP CO ............................................47

EAGLE POWER & EQUIPMENT CORP ..............131

MACHINERY SERVICES INC ................................24

VOLVO COMPACTION ..........................................57

ELLIOTT & FRANTZ INC ..................................34,49

MEDICO INDUSTRIES INC ....................................40

WANTED ................................................................116

EMPIRE CRANE CO ..............................................35

MESSICK’S ............................................................40

WESTCHESTER TRACTOR INC ............................6

EOP ........................................................................111

METSO MINERALS SCREENING ........................97

WIRTGEN AMERICA ..............................................56

EQUIPMENT MART OF NEW YORK ....................37

MIKE ZYNDORF LLC ............................................32

WOODS CRW CORP ............................................20

ESCO CORP ........................................................110

MONROE TRACTOR & IMPLEMENT CO INC ......74

YANMAR AMERICA ..............................................91

FLUID POWER ....................................................110

NORTRAX ..............................................................33

ZANETIS POWER ATTACHMENTS ......................84

VERMEER NORTH ATLANTIC ..............................41

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 7, 2010 • Page 131

w w w. e a g l e p o w e r a n d e q u i p m e n t . c o m

Case CX210B with Rubber Tracks

RECENT TRADES 1995 Case 621B Wheel Loader, Stk# 32095, 1095 Hours .......... ................................................................................................$29,500

2004 Takeuchi TL130 Track Loader, ROPS, 2700 Hrs, Stk# 32003......................................................................................$23,500

1995 Case 570LXT Loader, Stk# 32098, 7492 Hours, Cab $12,800

1999 Case 586FL Forklift, 4 wd, 21 Foot Mast, Stk# 31679 .............. ......................................................................................................$21,400

2002 Case CX160 Excavator, Stk# 31314 ..................$49,900

2007 Case 621D Wheel Loader, A/C, Ride Control, Stk# 31814 ................................................................................................$89,800

Authorized Dealer for These Quality Lines: Eager Beaver & CAM Trailers • Rammer by Allied Hydraulic Hammers & Shakers • Sims Cabs & Cab Enclosures • Guest Industries Forks • Airman Portable Air Compressors • Zanetis Planers • Trailking Trailers • FFC Attachments Frank Beck

Pat DiCicco

Jim Lutz

Tom Scott

Richard Verna

Rodney Bush

Dean J. Leonetti

S. Montgomery Co.

Phila Co. & Bucks Co.

Bucks & N. Montgomery Counties

Delaware Co. & S. Chester Co.

215/870-4546

215/680-9203

215/870-8567

S. Chester Co., Cecil County, MD, New Castle Co., DE

302/530-9134

610/420-4770

Skid Steer/Trencher Specialist Delaware Co., S. Chester Co., New Castle Co. DE, Cecil Co. MD

Skid Steer/Trencher Specialist Philadelphia Co., S. Montgomery Co., Bucks Co. & N. Chester Co.

302/354-1947

215/783-1847

Dean R. Leonetti, Sales Manager

953 Bethlehem Pk (Route 309) Montgomeryville, PA 18936 215/699-5871 Fax 215/699-6416 N E W H O U R S Mon.-Fri. 7AM-5:30PM

•

215/699-5871

2211 Dupont Highway New Castle, DE 19720 302/652-3028 Fax 302/652-7540 N E W H O U R S Mon.-Fri. 7AM-5PM

55 Senn Drive Eagle, PA 610/458-7054 Fax 610/458-7094 N E W H O U R S Mon.-Fri. 7:30AM-4PM

Page 132 • July 7, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Now your most piece of equipment

FIND exactly what you’re looking for using our enhanced search

COMPARE items by make, model, usage, specifications and location

ZOOM IN for a closer look at the equipment you’re interested in

ASSESS the value: get selling prices for similar items with one click

ADD items to your personal Watchlist and sign up for email alerts

The NEW rbauction.com – still the best place to find the equipment you want… now with more information to help you bid smarter.

» Find out more at rbauction.com/powerful

BID in person or online in real time