Published Nationally Northeast Edition
$3.00
®
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
www.constructionequipmentguide.com
470 Maryland Drive • Ft.12, W2015 ashington, PA• No. 19034 • 215/885-2900 ToWashington, ll Free 800-523-2200 • Fax 215/885-2910 • www.ConstructionEquipmentGuide.com August • Vol. LIV 16 • 470 Maryland Drive ••Ft. PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910
Inside
Komatsu Hosts Seminar, Demo Event…14
New York City’s LaGuardia Airport, starting in 2016, will be the subject of a $4 billion demolition and rebuilding project — to be done by a private-public partnership initiative (P3). The first half of the work will take 39 months to complete, following the groundbreaking early in the new year. Control, Guidance Help Contractors…24
Cleared for Takeoff: LaGuardia’s $4B Venture By Irwin Rapoport CEG CORRESPONDENT
New York City’s LaGuardia Airport, starting in 2016, will be the subject of a $4 billion demolition and rebuilding project — to be done by a New York State Highway Benefits From Innovation…59
Table of Contents ............4 Paving Section ..........59-73 Backhoes & Attachments Section ......................77-95
private-public partnership initiative (P3). The first half of the work will take 39 months to complete, following the groundbreaking early in the new year. The project, negotiated and put together by the Port Authority of New York and New Jersey,
was announced in late July at a press conference put together by The Association for a Better New York, which featured New York State Gov. Andrew Cuomo and Vice President Joe Biden where plans were put forward to construct a new see LAGUARDIA page 164
Norris Sales Goes Big Cleveland Brothers With New Pa. Facility Hosts Grand Opening See page 40 for full story.
See page 48 for full story.
Business Calendar ......124 Parts Section ................127 Auction Section....132-145 Advertisers Index ........146
Norris Sales’ new facility in Plymouth Meeting, Pa., is 55,000 sq. ft. on approximately 6 acres. The new site is almost double the size of the company’s previous location.
Cleveland Brothers’s new facility features a 60,000-sq.-ft. main building.
Page 2 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
2975 Galloway Rd., Bensalem, PA 19020 888.819.0894 • w w w.ransome.com /used
YOUR YOUR U USED SED EEQUIPMENT QUIPMENT S SOURCE OURCE 2011 CA CAT ATT D4KXL 1576 Hours
2008 CA CAT ATT CB22 A 628 Hours
2005 CASE 580M 4,337 Hours
$75,000
SOLD
2003 CA CAT ATT AP-1055B AP5,635 Hours
$22,500
$33,500
ID# CR30360, Cab, AC, Lighting, Power Angle Tilt Blade
ID# UT10613, OROPS, Lighting, Water Spray System, Double Drum Vibratory Roller
ID# UT10628, Cab, Heat, 4WD, Hammer Lines, E-Stick, GP Bucket
ID# UT10601, Extendable Screed, Electric Heated Screed, Push Roller, Ventilation System, Sonic Grade / Slope / Feeder Controls
2010 CA CAT ATT D3KXL 970 Hours
2010 CA CAT ATT D3KLGP A 1,722 Hours
2013 CA CAT ATT D5K2LGP 1,054 Hours
1998 CA CAT ATT D6RXL D6R 9,927 Hours
$65,000
$65,000
$114,000
ID# UP20580, OROPS, Heater terr,, PAT Blade, Strong Undercarriage
ID# UP20579, OROPS, Heater, P PA AT Blade, Undercarriage Just Turned
ID# UP20581, Cab, AC, PAT Blade, Strong Undercarriage
ID# UT10589, Cab, AC, Diff Steer, Semi-U Blade
2012 CA CAT ATT 319DLN 1941 Hours
2011 CA CAT ATT CS56 A 1,578 Hours
2009 CA CAT ATT CS56 3,039 Hours
2004 CA CAT ATT 980G 16,869 Hours
$129,000
$105,000
$89,000
ID# CR30365, Cab, AC, Hammer Lines, Quick Coupler, GP Bucket
ID# HR4060, Cab, AC, Smooth Drum Roller
ID# UP20541, Cab, AC, Lighting, Smooth Drum Roller
$89,000
$89,000
$74,500
ID# UT10583, Cab, AC, Auto Shift, Ride Control, GP Bucket
Denny D enny TThompson hompson · Grason Grason JJones ones · 888 888.819.0894 .819.089 4 · w www.ransome.com/used w w.ransome.com /used dthompson@ransome.com dt hompson @ ransome.com *Call us for specific machine details and availability.
ggjones@ransome.com jones @ ransome.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 3
South Jersey Branch: 201 North Route 73 Winslow Township, NJ 08095 856-767-5900
Corporate Headquarters: 2820 Hamilton Blvd South Plainfield, NJ 07080 908-561-9000
WHAT’S NEW AT BINDER? Visit our new website @
www.bindermachinery.com
For all our new features and direct links to our manufacturer’s product pages. FOR PRICING OR MORE INFORMATION
2003 KOMATSU PC308US LC-3
CALL: 888-460-7983 JIM CASENDINO - Used Equipment jcasendino@bindermachinery.com
--------------------------------------South Plainfield, New Jersey
S/N 20013, 7630 Hrs, 34” Tracks, A/C, 10’ Arm, Hyd. Kit, Coupler, 48” Bkt $185,000
2014 VOGELE SUPER 700 S/N 0790.1504, 144 Hrs, 3’8” to 6’7” Electric Screed $138,500
2014 HAMM HD70iVV HF S/N H1860072, 124 Hrs, 59” Drums, Open ROPS, Vandalism Covers $118,500
2014 HAMM HD120iVV HF S/N H2070021, 615 Hrs, 78” Drums, Open ROPS, Vandalism Covers $155,500
2014 HAMM HD12VV S/N H200.4230, 21 2007 HAMM 3205 S/N H1580262, 231 Hrs, 48” Drums, Open ROPS, Vandalism Hrs, 54” Drum, Open ROPS, Vandalism Covers $39,500 Covers $55,500
2006 INGERSOLL RAND DD138HFA S/N 189731, 5213 Hrs, 84” Drums, HID Night Lights $29,500
2005 INGERSOLL RAND DD118HFA S/N 186446, 4326 Hrs, HID Night Lighting, Open ROPS $24,000
2003 INGERSOLL RAND DD130HF S/N 173474, 4186 Hrs, HID Night Lighting, 84” Drums $27,500
2008 KOMATSU SK820-5N S/N A40203, 750 Hrs, Extra CWT, Standard Flow, GP Bkt $22,500
2013 KOMATSU D61PX-23 S/N 30066, 1615 Hrs, Cab w/AC, 34” Tracks, 12’ 6-Way Blade $205,000
1997 KOMATSU D155AX-3 S/N 60542, 6698 Hrs, 26” Tracks, Cab & A/C, Semi-U Blade $320,000
2004 KOMATSU D41P-6C S/N B40091, 5380 Hrs, 28” Tracks, 10’ 6-Way Blade, Cab w/AC $85,000
2009 KOMATSU D61PX-15EO S/N B46224, 2950 Hrs, 34” Tracks, 12’8” 6-Way Blade, Cab & A/C $95,000
2013 KOMATSU WA470-7 S/N 10026, 1408 Hrs, 26.5xR25 Tires, A/C, Coupler & GP Bucket. $299,000
2012 KOMATSU WA380-7 S/N A64094, 1771 Hrs, 3rd Valve, A/C, 4cy Pin-on GP Bucket $178,500
2003 KOMATSU WA500-3LK S/N A72055, 11269 Hrs, 29.5x25 Tires, A/C, 6.5cy GP Bkt $95,000
1985 KOMATSU WA500-1 S/N 10027, 1100 Hrs, 29.5x25 Tires, A/C, 5.9cy GP Bkt, Rebuilt Engine $44,500
2001 KOMATSU PC600 LC-6A S/N 11031, 11910 Hrs, 36” Tracks, 11’ Arm, A/C; Coupler, 66” Bkt. $151,500
2014 KOMATSU PC210 LC-10 S/N 451103, 709 Hrs, 32” Tracks, 9’ Arm, QD Coupler,Choice of Bkt., $176,500
2010 KOMATSU PC138US LC-8 S/N 24950, 1474 Hrs, A/C, 24” Steel Tracks, 8’2” Arm, 30” Bkt $118,500
2014 TAKEUCHI TB216R S/N 216100230, 246 Hrs, 9” Rubber Tracks, 3’8” Arm, Hyd. Unit $28,000
Page 4 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
NORTHEAST EDITION Circulated Throughout
IN THIS ISSUE 14
®
24
59
Founder, Publisher & CEO Northeast Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Main office
To read these stories and many more, visit www.constructionequipmentguide.com
SPECIAL SECTION
44 JLG NAMES NEW EXCLUSIVE SKYTRACK DEALER
77 BACKHOES & ATTACHMENTS
OF CENTRAL, NORTHERN PA.
Be sure to check out this special section! Keep up to date with the latest information on backhoes and attachments.
Key Equipment is a growing regional provider of lifting and material handling equipment and has recently been named JLG exclusive Skytrack dealer of 20 counties in central and northern Pennsylvania.
FEATURES
59 NEW YORK STATE HIGHWAY 243 BENEFITS
8
FROM INNOVATION
NSSGA PRES. SAYS EPA EXCEEDED ITS
STATUTORY AUTHORITY
New York State Highway 243 has been a stalwart, 11.03-mi. (17.75 km)
Michael W. Johnson, president and CEO of the National Stone, Sand and Gravel Association, interrupted his advocacy efforts recently to talk about the DRIVE Act and the need for a long-term, stably funded surface transportation bill.
east-west state highway in the southern tier of New York since the 1930
14 KOMATSU HOSTS TECHNICAL INFORMATION SEMINAR, DEMO The event was held at Darling Sand and Gravel’s facility in Clinton Corners, N.Y. Darling Sand and Gravel is owned and operated by Ed Kading, whose skills with an excavator are featured on the Animal Planet reality TV show “The Pool Master.”
Toll Free Fax Web site Editorial e-mail Advertising e-mail
• New Hampshire • Vermont • Connecticut • Rhode Island • New York • New Jersey • Delaware • Maine • Pennsylvania • Maryland/D.C. • Virginia • West Virginia • Massachusetts Edwin M. McKeon Sr. Edwin M. McKeon Jr. Craig Mongeau Christine Wolkin Pete Sigmund John Pinkerton Tom Weinmann Cathy Printz
470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910
www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com
Edwin M. McKeon Jr. • New Jersey • Eastern Pennsylvania • Northern Maryland • Delaware 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 e-mail tmckeon@cegltd.com
For advertising rates: Contact
Kent Hogeboom • New York • New England • Northern Pennsylvania 315/866-1423 Toll Free 800/988-1203 Fax 315/866-1379 e-mail khogeboom@cegltd.com
Contact
68 PRECISION ASPHALT PAVING: BEST PRACTICES
Ed Bryden • West Virginia • Western Pennsylvania 440/268-9690 Toll Free 800/810-7640 Fax 440/268-9691 e-mail ebryden@cegltd.com
FOR COMPACTION
Contact
re-numbering of state highways in New York.
From proper paver setup to achieving optimum mat temperature and conducting the rolling pattern at just the right time — each step in the process will affect
Contact
Bob Buckley • National • Central Pennsylvania 518/863-4100 Toll Free 800/992-7116 Fax 518/863-7100 e-mail bbuckley@cegltd.com
the next.
136 HEWDEN AUCTION BRINGS LOTS TO PROXIBID 22 GROFF TRACTOR NOW OFFERS RUBBLE
MARKETPLACE
MASTER CRUSHERS
Proxibid will provide online bidding for Thimbleby & Shorland’s upcoming Hewden
Groff Tractor New Jersey LLC has entered into an agreement with Rubble Master to sell its full line of compact crushing and screening equipment.
August Auction, the largest auction of its kind in the United Kingdom.
24 CONTROL, GUIDANCE ALLOW CONTRACTORS TO
EQUIPMENT
REMAIN COMPETITIVE Becoming more competitive is a goal shared by companies across the board, and smart business owners keep their eyes open around the clock for the tool, technology or system that can put them ahead.
62 ATLAS COPCO Intelligent Compaction System 72 TEREX FD5000 Mixer Truck 138 KOMATSU PC210LL-10 Log Loader
30 PROFESSIONAL WOMEN IN CONSTRUCTION HOLDS TRANSPORTATION FORUM IN NYC William Fife, principal, The Fife Group and senior advisor, Weidlinger Associates, the moderator of Professional Women in Construction’s (PWC) Transportation Forums for the past 20 years, set the tone for the annual regional update held the morning of July 15th at the Yale Club in N.Y. City.
DEPARTMENTS 124 BUSINESS CALENDAR 130 CLASSIFIEDS 132 COMING AUCTIONS
Mobile
YouTube
Construction Equipment Guide Northeast Edition (ISSN 1058-787X) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Northeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2015, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 5
SOLID PERFORMANCE
STARTS AT
$99,500. LG938L: 2.5 yd 3 / 160 hp
LG948L: 3.0 yd 3 / 173 hp
LG958L: 4.0 yd 3 / 224 hp
LG959: 4.0 yd 3 / 224 hp
$99,500*
$118,500*
$137,500*
$147,500*
When price and reliability are deciding factors, SDLG is your answer.. We offer four wheel loader models at industry-leading prices — they’re simple to operate, easy to maintain, and a perfect fit for your day-to-day jobs. Plus, our loaders are sold through an experienced, top-tier dealer network that's ready to support you any time you need them. Make the simple choice at sdlgna.com/na sdlgna.com/na. * Prices are subject to change without notice. notice. Visit sdlgna.com for details.
Lionville, PPAA (610) 363-9200
Frenchtown, NJ (908) 218-1919
Deptford, NJ (856) 227-6400
Staten Island, NY (718) 448-2444
pennjerseymachinery.com
Page 6 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
2010 JOHN DEERE 624K WHEEL LOADER, S/N DW624KZ628272, 3707 HRS, MACHINE HAS COUPLER AND GP BUCKET, $133,500
2012 JOHN DEERE 624K WHEEL LOADER, S/N 644566E1, 1381 HRS, IT4 ENGINE, JD LINK ULTIMATE, ZBAR LINKAGE, ZBAR COUPLER, RIDE CONTROL, CAB W/AIR, BUCKET AND FORKS, $167,500
2010 JOHN DEERE 310SJ LOADER BACKHOE, S/N 1T0310SJPA0182085, 3372 HRS, HAS AUX HYDRAULIC, 10’6 ARM, RESERVE FAN AND REAR CAMERA, $67,500
2012 JOHN DEERE 350G LC EXCAVATOR, S/N 1FF350GXEBE808234, 3794 HRS, MACHINE HAS NO BUCKET, HAS AUX HYDRAULIC, $225,000
KOMATSU WA380 WHEEL LOADER, STOCK# A64183A1, COUPLER WITH 4 YD GP BUCKET, 1107 HRS, CALL FOR PRICE
2008 JOHN DEERE 27D MINI EXCAVATOR, S/N FF027DX250055, 2004 HRS, BUCKET, CALL FOR PRICE
2006 JOHN DEERE 624J WHEEL LOADER, S/N DW624JZ605815, 5784 HRS, GP BUCKET, SETS OF FORKS AND COUPLER CALL FOR PRICE
Your New Ditch Witch De from Delawa aler re Massachuse to tts... and now inc luding Maryland & Washington DC !
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 7
631/643-2605 www.allislandequipment.com
Serving Nassau, Suffolk and the Five Boroughs of New York since 1970
y ’s oldest it C k r o Y New ealer! Takeuchi D
E0% Financ
o
for 42
e Month s
®
Lowboy
Page 8 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
NSSGA Pres. Says EPA Exceeded Its Statutory Authority By Giles Lambertson
year endeavor. From when you are doing the planning right on through construction, you are talking about Michael W. Johnson, presiseveral years for compledent and CEO of the National tion. One- or two-year bills Stone, Sand and Gravel don’t give a state the abiliAssociation, interrupted his ty to plan effectively. Most advocacy efforts recently to talk states have to be able to about the DRIVE Act and the budget a complete project need for a long-term, stably before they can start it. One funded surface transportation and two-year federal fundbill. The DRIVE Act is the ing takes the ability of a reauthorization bill approved state to plan right out of the July 21 at the committee level equation. They cannot for full Senate consideration. invest money in the most CEG: A release by your efficient and advantageous association says that the way. So long-term bills are NSSGA knows “exactly what crucial. it will take to get America’s CEG: The Act seems economy and infrastructure to offer more flexible utiback to what it needs to be.” lization of federal funds Is the association’s answer, by at state and local levels. It any chance, “money”? Or is emphasizes freight traffic there more to it than that? corridors. It tends to supJohnson: It certainly starts port rural funding for with money. For every dollar in roads and bridges. Are infrastructure spending, you these features of special generate additional spending — interest to NSSGA? I believe the multiplier is three Johnson: Our special or four. When you are coninterest is getting a longstructing roads and other transterm bill that is stably fundportation arteries, you are growed so we can get back to ing the GDP and creating jobs. CEG: The NSSGA sup- Michael W. Johnson, president and CEO of the National Stone, Sand building infrastructure that Gravel Association, recently spoke about the DRIVE Act and the meets the needs of the ports the DRIVE Act. Why is and need for a long-term, stably funded surface transportation bill. country. A majority of it preferable to other profmembers of Congress fered transportation funding believe in state rights and proposals? Society of Civil Engineers says $70 billion Johnson: The DRIVE Act was reported a year is about right. The administration local flexibility. I think that is OK, but let me out of committee unanimously, which to my has called for expenditure of $80 billion be absolutely clear: What the association is mind makes it politically viable. per year. Sen. Bernie Sanders, the inde- most interested in is a long-term bill that is CEG: In the DRIVE Act, per-annum pendent socialist candidate for president, stably funded. How that happens is up to highway funding would change little. It believes $200 billion a year is not too Congress. CEG: There is a great political relucmoves from approximately $41 billion in much. Does the association have a desired tance to prioritize funding, the preference the current two-year MAP-21 authoriza- level of funding in mind? tion to about $44 billion in fiscal year Johnson: It is difficult to put a hard num- being to fund across the board to win sup2015, systematically rising during the six ber on it. Every proposal you hear about has port for passage of a bill. The DRIVE Act years of the DRIVE Act to $49 billion in a number, a number that people believe is rather pointedly prioritizes bridge repair 2021. You believe that funding level is suf- needed to not just keep ahead of projected and Interstate System repair. Is this prificient? models of increasing traffic but to invest in oritization a significant departure from Johnson: No, I frankly don’t believe the the future of the system. I don’t know exact- previous bills? Johnson: Any time you have limited bill’s level of funding is sufficient to meet the ly what the optimum number is. I believe needs of our country. We have neglected what we are practicing here is the art of the resources, you have to consider priorities. infrastructure for way too long and we have politically possible. Senators came together We are at a point in time when priorities may an aging system that is well past its life around a proposal, the DRIVE Act, that be necessary. We as an industry are ready to cycle. Our roads no longer are the envy of starts the process of investment in our trans- provide all the rock that the country needs the world. Some 60,000 of our bridges are portation in a multi-year bill. It is a great step for whatever priority projects it has, but none of that will happen without a long-term bill. structurally deficient. So is it enough? No, it forward. isn’t. We need to do much more as we build CEG: It could be argued, in fact, is We are focusing on that — a long-term, stathe economy and continue to create jobs. argued, that just about any level of fund- bly funded bill. CEG: The bill talks about Highway What we are looking at in this bill is meeting ing that is authorized for multiple years is the most critical needs over the next six better than any one-year bill. Is that your Transportation Fund transparency to ensure that funding goes where it is years. view? CEG: Sharply higher funding levels Johnson: No doubt about it. Any type of authorized to go, and about extending a have been proposed. The American transportation construction project is a multi- user fee to electric vehicles to match the
CEG CORRESPONDENT
gasoline tax on gas-fueled vehicles. What is the NSSGA position on gas tax funding and Highway Trust Fund solvency? Johnson: The association’s position is very clear. The Highway Trust Fund is the most efficient means of setting aside transportation funding — and having dedicated funds is the best way to go. The best means of collecting revenue for the fund is a user fee on fuel. It is a fair way to fund transportation. There is a belief that in this political climate the gas tax is not liable to be increased, so we have to look at this in longer terms. The role of the federal government is to support growth of commerce between the states as well as internationally. We have got to get to a more reliable way of doing that with our infrastructure. CEG: How broadly is the construction industry supporting the DRIVE Act? Johnson: The support is strong. Certainly the association is working hard to make sure any bill will pass the House and Senate. We have generated more than 4,000 grassroots contacts with our members across the country. CEG: Are they all supportive? Johnson: There have been a number of very positive responses. Some are still evaluating the bills. I can tell you that my members for years have been consistently supportive of a long-term, well-funded bill. CEG: Does your aggregates association deem a long-term highway funding bill to be as critical an issue as the EPA Waters of the U.S. rule? Johnson: The Waters of the U.S. rule is one of the most egregious statutes I have seen in my 25 years in Washington. I’m not alone; others say the same thing about how the EPA exceeded its statutory authority. We are going to continue to fight this rule as hard as we are fighting for a long-term, stably funded transportation bill. It’s not either-or. It’s both. The water rule doesn’t only make it harder for members of the aggregates industry do their work well, it makes it harder for state governments to work and for the construction industry to work. This rule has impact across the board, which is why there is such remarkable opposition to it. CEG: So are you feeling good about getting a transportation bill you like? Johnson: I am very optimistic about multi-year funding. Congress is listening. Constituents from all walks of life are saying we have got to do better. We have to build safer, better roads to enjoy our lifestyle and build our economy throughout the union. In some rankings, we have fallen to 28th in the world in quality of infrastructure. That’s untenable. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 9
QUALITY USED EQUIPMENT VALUE & PERFORMANCE ASSURED
2011 CATERPILLAR CB14, S/N: DTT00836, 256 HRS, UNIT#: DTT836 ..............$25,000
2013 CAT 930K, STK #: VRHN1360; 611 HRS, S/N: RHN01360 ........................$179,000
ARTICULATED TRUCKS 2011 Caterpillar 740 B, UNIT NUMBER 11M0272, SERIAL NUMBER T4R00412, HOURS 2464, Air Conditioner, Bed, Standard, Retarder, Tailgate, Ultra Low Sulfur Diesel Fuel ..................................$425,000 2003 Caterpillar 725, UNIT NUMBER RCAFX870, SERIAL NUMBER AFX00870, HOURS 13163 ......CALL BACKHOE LOADERS 2013 Caterpillar 420F IT, UNIT NUMBER 13M0233, SERIAL NUMBER JWJ01374, HOURS 1388, Lane 2 Order, Stick, Extendable, 14ft, Pt, 4wd, Autoshift, Engine, 74.5kw, C4.4 Dita, T4i, Hydraulics, Mp, 6fcn/8bnk, It, Cab, Deluxe, Ac, Belt, Seat, 2" Suspension, Counterweight, 1015 Lbs, Stabilizer Pads, Flip-over, Bucket-hd, 24", 6.2 Cft, Instructions, Ansi, Ride Control, Cold Weather Package, 120v Hrc, Plate Group - Boom Wear, Storage, Gp-box, Coupler, Pg, Manual, Dual Lock, Pins, Spare, Bucket-gp, 1.31 Cyd, It, Cutting Edge, Two Piece,wide, Pack, Domestic Truck, Serialized Technical Media Kit, Lines, Combined Aux, E-stick, Tires, 4wd, Bias, Firestone, Shipping/storage Protection, Pl522 Foley Installed...... ........................................................................$94,000 COMPACTORS 2010 Caterpillar CB54, UNIT NUMBER 99401, SERIAL NUMBER JLM00306, HOURS 544, Orops, Water Spray Sys, Product Link, Lighting, Rops/fops Platform ..........................................................$93,500 2011 Caterpillar CB54, UNIT NUMBER 99400, SERIAL NUMBER JLM00483, HOURS 750, Orops, Water Spray Sys, Product Link, Lighting, Rops/fops Platform ..........................................................$96,500
2011 CAT D6T LGP, STK #: RCZJB161, 2603 HRS, S/N: ZJB00161 ..................$289,000
2013 CATERPILLAR 336EL, S/N: BZY02499, 2,520 HRS, UNIT#: RCBZY2499 ....$315,000
2013 Caterpillar D6NLGP, UNIT NUMBER RCPBA582, SERIAL NUMBER PBA00582, HOURS 2090, Erops, Air Conditioner ........................$228,000 2013 Caterpillar D6NLGP, UNIT NUMBER RCPBA583, SERIAL NUMBER PBA00583, HOURS 2889..............................................................$217,000 MATERIAL HANDLERS / DEMOLITION 2012 Exodus MX447HDR, UNIT NUMBER 12M0079, 2014 Caterpillar D6K2 XL, UNIT NUMBER 13M0638, SERIAL NUMBER 447-11-071, HOURS 1687......CALL SERIAL NUMBER WMR00495, HOURS 343, Seat, Heated & Ventilated, Track, 22", Es, Xl, Hd, Guard, MOTOR GRADERS Track Guiding, F&r, Accugrade Ready, Cab, 2003 Caterpillar 140HNA, UNIT NUMBER 58840, Rollerframe, 8/2 Heavy Duty, Regional Package AdsdSERIAL NUMBER APM00978, HOURS 9474, Erops, n, Ripper Ready Package, Protection Package, Air Conditioner, Side Shift, Scarifier, Front, Diff Standard, Fan, Demand, Hydraulic Oil, Standard, Cab, Lock/unloc, Engine Enclosures, Product Link, Blade Standard, Caterpillar Product Link 522 Blade, 126" Float ..............................................................$110,000 Aro Xl, Drawbar, Complete Storage Protection, Cold Weather, 120v, Package, Pack-dismounted Or N.i. TRACK TYPE TRACTORS Blade, Lane 3 Order ......................................$179,000 2012 Caterpillar D6NLGP, UNIT NUMBER RCPBA525, SERIAL NUMBER PBA00525, HOURS 2013 Caterpillar D4K2 LGP, UNIT NUMBER 2325, Erops, Air Conditioner, Blade, Pat ......$215,000 12M0286, SERIAL NUMBER KRR00238, HOURS 2026, Lane 2 Order, Engine,epa 4i,eu Iiib,mlit 4, Drive, Standard, Undercarriage, Salt, Track, 25", Ms, Salt, Are you looking for a reliable source for Lgp, Hydraulics, 3 Valve, Standard, Lights, 6, Cab, Rops, Seat,cloth, Heated Seat&cntrls, Sound quality used components and parts? Suppression, Omission, Grill, Radiator, Standard, Outback Parts is linked nationwide with three used parts networks, Guard Gp, Rear Omission, Drawbar, Standard, so finding dependable parts fast and conveniently is never a problem. Counterweight, Omission, Std, Instructions, Ansi, Outback Parts also supplies replacement parts for Non-Cat® machines. Instructions, English, Heater, Engine Coolant (120v), So when you’re needing parts, call or visit us on-line. Starting Aid, Ether, Blade, D4k Lgp, Accugrade, Roll Call: 732/885-3005 www.outbackparts.com On-roll Off, Installation Of Blade At Port, Fax: 609/443-1146 jmeyer@foleyinc.com Installation,accugrade,p Pitch ......................$115,000
2012 Caterpillar CB 64, UNIT NUMBER 11M0411, SERIAL NUMBER DJM00348, HOURS 1932, Orops.... ........................................................................$94,000 2012 Caterpillar CS56, UNIT NUMBER RCC5S1747, SERIAL NUMBER C5S01747, HOURS 2830 $107,500
Used Parts • Quality Parts • Attachments
ASK ABOUT OUR FLEET RESTRUCTURING OPTIONS. WE CAN HELP WITH ONE MACHINE OR THE ENTIRE FLEET RICH CALIFANO rcalifano@foleyinc.com 732-261-8424
international & Domestic UseD eqUipment sales & pUrchasing
1-800-939-6611 855 CENTENNIAL AVENUE PISCATAWAY, NJ 08854 WWW.FOLEYINC.COM/USED
ART VIDA aviDa@foleyinc.com 732-885-5555
UseD eqUipment & rental manager
Page 10 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
YOUR NEEDS. UNEARTHED. Building your construction business together. Our G-Series Compact E xcavators may be VPDOO EXW WKH\ŤUH IXOO RI ELJ LGHDV IURP FRQWUDFWRUV DQG Æ HHW PDQDJHUV OLNH \RX )RU H[DPSOH D ZLGHU HQWU \ ZD\ ,PSURYHG YLVLELOLW \ $ WKLUG VHU YLFH GRRU IRU HDVLHU PDLQWHQDQFH DQG FRROHU FOHDQLQJ $QG D GHSHQGDEOH QR IXVV )LQDO 7LHU HQJLQH <RX DVNHG IRU PDFKLQHV WKDW DUH RSHUDWRU IULHQGO\ GHSHQGDEOH DQG HDV\ WR PDLQWDLQ :H PDGH VXUH WKH * 6HULHV GHOLYHUV 6HH IRU \RXUVHOI DW \RXU GHDOHU RU DW -RKQ'HHUH FRP H[FDYDWRUV
www.plasterer.com
WE OFFER FLEXIBLE RENTAL PURCHASE TERMS Call us for all your excavator needs ATTACHMENTS AVAILABLE FOR DAILY, WEEKLY & MONTHLY RENTAL Excavators:â&#x20AC;&#x2C6;Shears,â&#x20AC;&#x2C6;Processorâ&#x20AC;&#x2C6;Hydraulicâ&#x20AC;&#x2C6;Breakersâ&#x20AC;&#x2C6;&â&#x20AC;&#x2C6;Plateâ&#x20AC;&#x2C6;Compactors,â&#x20AC;&#x2C6; Hydraulicâ&#x20AC;&#x2C6;Thumbs,â&#x20AC;&#x2C6;Grapplesâ&#x20AC;&#x2C6;andâ&#x20AC;&#x2C6;Variousâ&#x20AC;&#x2C6;Buckets. Miniâ&#x20AC;&#x2C6;Excavators:â&#x20AC;&#x2C6;Hydraulicâ&#x20AC;&#x2C6;Breakersâ&#x20AC;&#x2C6;&â&#x20AC;&#x2C6;Plate Compactors,â&#x20AC;&#x2C6;Hydraulicâ&#x20AC;&#x2C6;Thumbs,â&#x20AC;&#x2C6;Augers
PLASTERER EQUIPMENT CO., INC. Serving Contractors, Municipalities, and Industry since 1912 LEBANON, PA
SELLERSVILLE, PA
BETHLEHEM, PA
LEWISBERRY, PA
2550 E. Cumberland St. (717) 273-2616 â&#x20AC;¢ (800) 225-4001
3215 State Rd. (215) 258-5700 â&#x20AC;¢ (800) 523-2209
400 Stoke Park Rd. (610) 867-4657 â&#x20AC;¢ (800) 587-9790
640 Lowther Rd. (717) 938-6568 â&#x20AC;¢ (866) 787-0001
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 11
HEAVY LIFT PACKAGE! Rogers No-Foot, Custom 55 Ton, Heavy Lift Package, 26’ Clear, Bucket Cutout, Adjustable Width Bi-Fold Ramps, Rogers Blue Paint ........................................IN STOCK!
NEW ARRIVAL!
NEW ARRIVAL! ASK ME ABOUT AIR RAMPS!
Rogers 35 Ton No-Foot, Custom 24’ Deck, 20” Loaded, Bucket Cutout, Adjustable Width Bi-Fold Ramps, 275’s, Aluminum ................ ..............IN STOCK!
Rogers TAG21XXL, 21 Ton Capacity, Premium Specs, Superior Quality, 235’s Aluminum, 7-Year Warranty, Black or Red Paint .. ............IN STOCK!
Rogers TAG25XXL, Air Lift Front Axle, 235/Tires, Aluminum Wheels, Red Paint ................ ..............IN STOCK! Also in stock with 3-Down Suspension Painted Red. 7-Year Warranty!
Rogers 50 Ton Custom, 24' clear, Cutout, Adjustable Width Bi-fold Ramps, Reinforced Wheelcovers, 275's, Aluminum, Air Lift 3rd ............................IN STOCK!
Rogers 40 ton Custom, 24' clear, Cutout, Adjustable Width Bi-fold Ramps, 275's, Aluminum, Air Lift Flip 3rd, Tri-axle weight 18,000lbs, Black or RedIN STOCK!
NEW ARRIVAL!
NEW ARRIVAL!
Rogers 50 Ton Gentle Riser, 25’ Clear, Bi-Fold Ramps, Cut Out, 275’s on Aluminum, Night Lights, Strobes ................IN STOCK!
Rogers 55 Ton, 25’ Clear, Wedge Style Front, Custom 5th Wheel Height, Air Lift 3rd, Air Lift Flip 4th....IN STOCK!
WEDGE FRONT!
Page 12 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
People, Products & Service….you’ll dig!
RENTALS • SALES • PARTS • SERVICE One Location, Multiple Choices
Part of the Atlas Copco Group
For our complete line of rental equipment visit
www.harterequipment.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 13
Page 14 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Komatsu Hosts Technical Information Seminar, Demo
O
n July 15, Pine Bush Equipment and Komatsu hosted a technical information seminar and equipment demonstration for Komatsu’s bulldozers and excavators equipped with intelligent machine control. The event was held at Darling Sand and Gravel’s facility in Clinton Corners, N.Y. Darling Sand and Gravel is owned and operated by Ed Kading, whose skills with an excavator are featured on the Animal Planet reality TV show “The Pool Master.”
The intelligent machine control (IMC) is Komatsu’s new fully integrated grade control system. Komatsu’s grade control system is the first in the industry to roll off the factory assembly lines completely integrated into the design and build of the machine, according to the manufacturer. There are no GPS antennas and no coiled up cables that run between the machine and the blade; the Komatsu system offers fully automated operation whether dealing with a rough grade or a finished grade. This system is available in a variety of sizes in the Komatsu dozer lineup. Komatsu also took advantage of this event to introduce the PC210LCi-10, the world’s first intelligent machine control excavator. see KOMATSU page 102
The Komatsu PC210LCi-10 is the first excavator with fully integrated intelligent machine control.
With Komatsu’s IMC, these dozers nearly drive themselves.
Lellio Marino (L) and Joe Williamson, both of LM Heavy Civil Construction, headquartered in Massachusetts, and guests of C.N. Wood, are on hand to get some stick time in the new Komatsu D65PX dozer.
Daniel Sullivan, Paula Benard and Sam McRell, all of C.N. Wood, Boston’s Komatsu dealership, made the trek to gather first-hand knowledge and experience with Komatsu’s new products.
Representatives of Edward Ehrbar Inc. in attendance (L-R) are Kevin Buniva, product support representative; Anthony Olivieri, Connecticut branch manager; Patrick Ahern, president; Stephen Schiavetta, sales manager; Matthew Ahern Sr., executive vice president; Jeff Mottarella, ELQ Industries (guest of Edward Ehrbar Inc.); William Tucker, sales representative; and Matthew Ahern Jr., marketing specialist.
Matthew Ahern Sr. (R) has spent many years working at Edward Ehrbar, New York City’s Komatsu dealership, and his son, Matthew Ahern Jr., is following in his footsteps.
Cheryl Kading and Ed Kading, owners of Darling Sand and Gravel, graciously made their facility available. (L-R) are Ed Powers, Komatsu America; Jimmy Boniface, Pine Bush Equipment; Cheryl and Ed Kading; and Greg Fiori, Komatsu America.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 15
Page 16 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
WHEN YOUR JOB IS ON THE LINE GET H.O. PENN RENTALS ON THE LINE
LLike ike uuss oon n FFacebook acebook Key word : H.O. Penn Machiner y
1-888-RENT-CAT w w w.hopenn.com
Since 1923
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 17
SOLD 2004 SENNEBOGEN 830R-HD CRAWLER MOUNTED MATERIAL HANDLER, DEUTZ 204 H.P. WATER-COOLED DIESEL ENGINE, 24” 3 GROUSER TRACK SHOES, HYDRAULIC RAISING CAB, 36 TON OPERATING 15Kw BELT DRIVEN GENERATOR – NO ATTACHMENT INCLUDED, JUST HANGAR YOKE, C005918....$69,500
2007 CEC 32X54 JAW CRUSHER, 250/450 TON PER HR, CUMMINS QSX-15 DIESEL, DINGS ELECTRO-MAG, MAIN & SIDE DISCHARGE BELTS, 5TH WHEEL FRAME W/KING PIN, INCLUDES X-TRA SET OF NEW JAW DIES, C003725 ............ ..............................................................$190,000 $159,000
2004 NORDBERG/METSO ST171 SCREENING PLANT, INTELLIGENT CONTROLLER IC300 SCREEN, 2 SPEED TRACKS, 16” SHOES, ADJUSTABLE SPEED CASSETTE STYLE HOPPER CONVEYOR/ADJUSTABLE HEIGHT PRODUCT HOPPER CONVEYOR, 16” SHOES, C005992 ..................................$79,500
2008 NORDBERG/METSO CV50 MOBILE SCREENING PLANT, SCREEN-ALL BOX, TOP & BOTTOM SCREEN DECKS, PINTLE HOOK TOW ASSEMBLY, 3” SQUARE TOP SCREEN, 3/4” X 4” BOTTOM SCREEN, #20912 ........................................$49,500 YR
Model
EE#
PRICE
CRAWLER DOZERS/LOADERS KOMATSU 2000 D41E-6 2012 D65WX-17 CATERPILLAR 1995 D3C-XL JOHN DEERE 1989 550G
C007438 C005727
$32,500 $195,000
C006466 C006467
$22,500 SOLD
$19,500
EXCAVATORS CATERPILLAR 2004 321C-LCR C006409 2000 345BL C006594 2005 M318C C006797 KOMATSU 2014 PC210LC-10 C006317 2006 PC220LC-8LR C001119 2013 PC228USLC-8 C006264 2013 PC240LC-10 C006323 2013 PC290LC-10 C006321 2010 PC350LC-8 C006316 2011 PC360LC-10 C006350 2013 PC360LC-10 C006325 2004 PC400LC-5 C006167 2010 PC450LC-8 C005952 2010 PC450LC-8 C005953 2010 PC450LC-8 C003313 LIEBHERR 2006 A900C C003281 MATERIAL HANDLERS, RECYCLERS FUCHS 2005 MHL350D C003296 2005 Grapple for MHL350D C003297 2007 Grapple for MHL350D C003670 SENNEBOGEN 2004 830 C005918 GRADERS KOMATSU 2001 GD650A-2 C003420 2005 GD655-3C C003433 2008 GD655-3E0 C004620
2008 HAMM HD14VV ASPHALT ROLLER, ROPS CANOPY, HYDROSTATIC DUAL DRUM DRIVE, AUTO/MANUAL VIBRATION SYSTEM, HYDROSTATIC ARTICULATED STEERING, PRESSURIZED WATER SYSTEM W/SPRAY NOZZLES, C005528 ....................................................................$15,000
$69,500 $89,500 $62,500 $199,500 $189,000 $145,000 $236,500 $205,500 $139,000 $199,000 $269,000 $32,500 $239,000 $239,000 $249,000 $129,000 $114,000 $8,000 $4,000 $69,500 $90,000 $128,500 $139,500
YR
Model
WHEEL LOADERS
EE#
PRICE
C006662 C005597
POR POR
KOMATSU 1993 2012 1997 2004 2007 2012 2013 2004 2010 2013 1999 2006
C007415 C002729 C006463 C005904 C006017 C006410 C006216 C006219 C006269 C006513 C006043 C006663
$33,500 $159,000 $49,500 $89,000 $125,000 $205,000 $290,000 $42,500 $129,500 $319,500 $99,000 POR
C006407 MILLERS, PAVERS, ROLLERS
$29,500
WA250-1 WA320-6 WA380-3 WA450-5L WA450-6 WA470-6 WA470-7 WA480-5 WA480-6 WA500-7 WA600-3 WA600-3
CATERPILLAR 1998 446B CARLSON 2011 DYNAPAC 1999 GEHL 1999 HAMM 2007 2011 INGERSOLL 2001 LEEBOY 2010 WIRTGEN 2011 2011 ROGERS 2003 STOW 1993 U-HAUL 2002 VALUE 1986
BACKHOES
CP90
C005212
$89,500
CC522
C005488
$29,500
1438 HD12VV HD+120VVHF RAND DD24 DD28HF
C006470
$14,500
C006565 C004069
$12,500 $154,648
C006532 C006455
POR $12,500
C006298
$89,500
C007064 C007065
$349,000 $349,000
CR50PL
C006830
$32,500
T3000
C005919
$200
U-TILT
C005923
$750
50 Ton
C006357
POR
8816B W200 W200
TRAILERS
YR
Model
EE#
PRICE
CRANES
CATERPILLAR 2001 980G 2004 980G
Representing These Fine Lines of Equipment: WIRTGEN • VOGELE • HAMM • KLEEMANN • FUCHS • NPK • TROUT RIVER • LIEBHERR • JCB DOPPSTADT • JRB • BROCE • BAGELA • CARLSON • ROGERS BROS • ESCO • LA BOUNTY • KOMATSU • FELLING
CLARK 1978
714 11956 CRUSHING & SCREENING EQUIPMENT CEC 2007 CEC 32”x54” jaw crusher C003725 SCREEN MACHINE 2012 107D screener box C003242 METSO 2008 CV50 20912 2004 ST171 C005992 ATTACHMENTS HAMM 2012 Pad-foot shell kit for 3412, 84” Drum JRB 2012 96” pin-on forks for WA480 C003759 LaBOUNTY 1997 HDR40 C005990 2003 UP20 pulverizer jaw set 18715 2009 CP60 pulverizer (PC200/PC308 linkage) C000879 NPK GH4 C005986 2008 GH15 C002364 ROCKLAND 2009 BTH-D-CL hydraulic thumb C000380 HD-V spade-nose rock bucket for WA500-3 CATERPILLAR 345 ATTACHMENTS ALLIED 797CS HAMMER & BRACKET C006598 CATERPILLAR 52” EXCAVATING BUCKET C006595 2/3 TINE GRAPPLE C006612 LaBOUNTY 1999 MSD70R SHEAR C006596 NYE 2001 50 TON CONCRETE PULVERIZER C006597
$12,500
REDUCED $159,000 $115,000 $49,500 $79,500
P.O.R. $16,500 $12,500 $4,500 $29,500 $10,500 $49,000 $7,500 $15,000
$24,500 $3,900 TBD $55,000 $9,500
Contact: Hank Ruttura • Holbrook Office
631-563-7600
DENOTES KOMATSU CERTIFIED REMARKETING USED MACHINE DEPENDING ON CERTIFIED GRADE, UNIT MAY QUALIFY FOR SPECIAL FINANCING RATE AND/OR MANUFACTURER SUPPORTED WARRANTY. PLEASE CONTACT US FOR ADDITIONAL DETAILS ON THESE OR ANY OF THE ABOVE MENTIONED USED PIECES.
www.ehrbar.com
Page 18 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Voorhees, NJ 800-232-6535 Allentown, PA 800-383-8894 Portland, ME 800-325-4253 Springfield, MA 800-854-5306
Baltimore, MD 888-601-7500 Walpole, MA 800-854-5310 Albany, NY 800-854-5307
Scranton, PA 800-569-1400 Elkton, MD 800-544-7127 Delmarva, DE 866-486-1400
HALE HAS IT!
www.haletrailer.com
New Heavy Haul Arrivals Llamé NJ para empleado qué habla español • 800-232-6355 Ext. 193
IN STOCK
New Fontaine 3+3+3 80 Ton Widespread Lowboys, Available in Flat Deck & Drop Side Deck, All Components Available, Call for More Info IN STOCK
New Fontaine Steel Flatbeds, 48’ x 102” Spring Sliding Suspension, Winches & Bulkhead Included
New BWS EZ-2 Load Paver Equipment Hauler, 53’x102”, Air Ride Tri-Axle Suspension, Air Operated Paver Ramps & Upper Deck Ramp
New Fontaine Velocity Steel Drop Decks, 48’x102”, Air ride Spread, Bulkhead and Winches
Excellent We Rent Lowbeds Financing We Rent Walking Floors Available
IN STOCK
New XL Specialized 85 Ton Light Weight Lowboy, 30’x120” Air Ride, 3+3+3 Capable, Call for more information
Used 2010 Etnyre 85 Ton Lightweight 13 Axle Trailer, Includes 3 Axle Jeep, Power Tower Bump Steer 9’ Wide, Flat Floor
New Talbert and Etnyre 65 Ton Wide Spread Capable Lowboys IN STOCK
IN STOCK
New East walking floors, 48' long x 102" x 13', spring suspension; Keith walking floor installed. Also available, used aluminum refuse trailer.
New East Beast Aluminum Flatbeds, 48’x102” Air Ride Spread, Coil Pkg Sliding Winches, Alum. Wheels
New Manac 87 Cu. Yd. Hardox 450 Steel Dumps, 40'x102"x100" single point susp., barn door, 11R245 tires
2013 Manac Steel Single Drop Extendables, 53’-71’ x 102”, Air, Tri-Axle Suspension, Center Axle Lift, 8 Hole Steel Disc Wheels
New Talbert 20 Ton Tag Trailers, 21’x102”, Spring Suspension Wood Filled Ramps
New Fontaine & Talbert Dropside 55 & 60 Ton Lowboys, 26' Deck, 22.5 Wheels, Air-Ride/ Air Lift and Modular Available
New Talbert 35 Ton Lowboys 22" Deck Height, Air Ride Suspension
New Landoll Slide Axle Trailers, 50'x102", Air Ride Suspension, 20K Winch, Wireless Remote, PSI System & Dock Levelers Optional
NEW TALBERT & FONTAINE 5O & 55 TON LOW BOYS, Flat Level Deck & Raised Center, 25’ & 26’ Deck Lengths, (2) King Pin Locations, Automatic 3rd Axle Air Lifts, 275/70R 22.5, 3+1 Capability, In Stock!
www.haletrailer.com
We Rent Lowboys, Blade Trailers, Etc.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 19
Contractors Equipment & Supplies
FOR SALE OR RENT Rentals - Sales - Service - Parts - Training Link-Belt 210X3 Excavator • New ergonomic & advanced cab design • Cycle time improvements of 3% - 5%! • Operating weight: 47,840 lbs • Max dig depth: 21’10” ft/in • Bucket digging force: 34,170 lbf
Great Financing Options Available!
Wacker Neuson 803 Dual Power Excavator • Two drive options: Diesel and electro-hydraulic drive • Emission-free if neccessary • Operating weight min.: 2,399 lb • Breakaway force: 2,000 lbf
We are a Full Service Dealer/Distributor Dingo TX 1000 Wide Track
• Increased load capacity & greater reach at full height • Hinge Pin Height: 81” • Operating Capacity: 1,075 lbs • Ground Clearance: 6”
Items Available for Sale or Rent!
Gehl RT210 GEN: 2 Track Loader • IdealTrax™ Automatic Track Tensioning System • Gross Power @ rpm: 72 hp @ 2500 • Operating Capacity: 3,000 lbs.
New Product Offering
Call Rich Hess
Visit Our New Location! 1010 Conshohocken Rd., Conshohocken, PA 610-279-5777
www.NorrisSales.com Sicklerville, NJ 856-740-1400
Page 20 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
2015 Merlo Roto 45.21MCSS Telehandler 10,000 lb. Max. Lift Capacity, 68’2” Max. Lift Ht., 4WD, Hyd Carriage Disconnect, Rear Axle Align Indicator, Work Lights on Boom & Cab Front & Rear, AC, Cold Start Kit, 6’6” Jib, 48” Forks, 1.75yd3 Bucket, Aerial Work Platform, Reduced Height Crane Boom, stk8469
Call for Pricing
2003 Grove TMS900E, 90 Ton, 142’+56’, 8-ton Ball, 35-ton Block, Hydraulic Tilting Cab, Cummins ISM 450HP, stk8397 ..............................$389,000
2011 National NBT45, 127’ Boom, Calib for Jib, Heat & AC, Drum Rotat Indicator, 4500 Lb. Ctwt, Peterbilt 365, Cummins 380HP, Jacobs C Brake, stk8559 ..................................................$349,500
2015 National 13110A, 110’ Boom, Calib for Jib, Peterbilt 348, Paccar PX-9 350HP, Ctwt on Turret, 18’ Steel Deck, stk8164 ................................$POR
2015 National NBT30H, 110’+44’, 2&3-Part Line Block, 22’ SD Bed, Rear Bumper Override Protection, Front Stabilizer, 2015 Freightliner 114SD, 435HP, stk8425 ................................$POR
2014 Merlo P120.10, 32’ Lift Ht, 26,500 lb. Lift Cap, Hydrostat Trans, Frame Leveling, Stability Ctrl Syst, stk8145................................................$POR
2014 Maeda MC285-2, 28’ Boom, Hookblock, Gas & Propane, Cable Remote Control, 244 Hours ....................................................................$POR
2005 Grove TMS900E, 90-Ton, 142’+56’, 6-Ton Ball, 35-Ton Block, LMI Display, ISO450 Engine, Engine Brake, Walking Beam/Air Suspension, stk8393 ..................................................$429,000
2014 National 800D, 100’+44’, 12.5-Ton Blk, 22’ SD Wood Bed, SFO, Air Shift PTO, 2015 Peterbilt 348, stk8162 ................................................$POR
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 21
In sttoock now!
ounted Excavator M Excavator Mounted VVibratory ibratory Drivers
le for Available purchase or rent.
* iÊ ÊÌ iÊ« ÜiÀ
Productive—Easy transpor t and minimal setup required Versatile—Multiple options for most carrier sizes Powerful—High push/pull force to handle any job
Call today to t learn more!
ÊÊ New Jersey
New York
ÊÊ
ÊÊ
24 Hour Emergency Line 800-4-HOFFMAN
Page 22 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
WHY RENT FROM US?
Groff Tractor Now Offers Rubble Master Crushers
Equipment Quality. Support. Availability. Sullair Compressor Delivery @ Model Rated Pressure
Pressure Range
185 375HAF 750HAF 900HAF 1150H 1300HAF 1600HAF TSR-20
185 cfm 375 cfm 750 cfm 900 cfm 1,150 cfm 1,300 cfm 1,600 cfm 970 cfm
80-125 80-150 80-150 80-150 175-350 80-150 80-150
Sullair Oil-free Compressors
Delivery @ Rated Pressure
DR-13, 150 Hp
785 cfm @ 125 PSIG
Sullair Electric Compressors
Delivery @ Rated Pressure
E900H
900 cfm @ 150 PSIG
Generator Model
Standby Rating
Prime Rating
Voltage
XQ20 XQ30 XQ60 XQ100 XQ200 XQ230 XQ300 XQ400 XQ500 XQ600 XQ800 XQ1000 XQ2000
20 ekW (25 kVA) 30 ekW (37.5 kVA) 60 ekW (75 kVA) 100 ekW (125 kVA) 200 ekW (250 kVA) 230 ekW (275 kVA) 300 ekW (310 kVA) 400 ekW (400 kVA) 500 ekW (625 kVA) 600 ekW (750 kVA) 795 ekW (994 kVA) 1000 ekW (1250 kVA) 2000 ekW (3007 kVA)
18 ekW (22.5 kVA) 27 ekW (33.8 kVA) 54 ekW (67.5 kVA) 90 ekW (112.5 kVA) 182 ekW (227.5 kVA) 210 ekW (262.5 kVA) 275 ekW (343.7 kVA) 365 ekW (365 kVA) 455 ekW (568 kVA) 545 ekW (681 kVA) 725 ekW (906 kVA) 910 ekW (1137 kVA) 1825 ekW (2631 kVA)
208 to 480 Volts 208 to 480 Volts 208 to 480 Volts 208 to 480 Volts 208 to 480 Volts 208 to 600 VAC 208 to 600 VAC 208 to 600 VAC 208 to 600 VAC 208 to 480 VAC 208 to 600 VAC 208 to 480 VAC 480 Volts
Light Tower 12 HP Diesel
Tier IV (F)
6kW Generator 120/240V
32 ft. - Max. Tower Height
Serving MA, ME, NH, RI, VT and Upstate NY. Call 1-800-821-6412.
www.miltoncat.com
Sean Collins (L), vice president of Groff Tractor New Jersey LLC, and Gerald Hanisch, president and CEO of Rubble Master.
Groff Tractor New Jersey LLC has entered into an agreement with Rubble Master to sell its full line of compact crushing and screening equipment. The company is authorized to distribute the Rubble Master line in Delaware, Maryland, New Jersey, New York, eastern Pennsylvania and Virginia. “We are pleased to add the Rubble Master machines to the lines of equipment we carry,” said Sean Collins, vice president of Groff Tractor of New Jersey LLC. “Like Groff, Rubble Master believes that customer service means lifetime support. Before we offer a new line, we review the manufacturer’s parts availability and warranty coverage. Rubble Master passed our stringent standards. The Rubble Master product line provides significant cost savings to a large segment of our core customers. It is a strategic fit to our existing product offering.”
“Bringing Groff Tractor on board continues to strengthen our coverage in the United States and helps us respond to the market’s growing demand for crushing and screening equipment,” said Gerald Hanisch, president and CEO of Rubble Master. Rubble Master offers a complete line of compact mobile crushing and screening machines, used in recycling, demolition, quarrying, mining, and contracting applications. The equipment has been helpful in reducing hauling costs and dump fees by recycling material, rather than disposing of it. The line includes five compact crushers and nine screens, all of which are easy to transport. For more information, visit www.grofftractor.com or www.rubblemaster.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 23
ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004
724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees WHEEL LOADERS
Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25 rubber, 15K hours, work ready . . . . . . . . . . . .$42,500 Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . . . .$79,500 John Deere 624G, 1996, EROPS, quick coupler, GP bkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$46,000 Volvo L60E, 2005, EROPS, coupler, aux hyd, boom susp, 20.5R25, v. good . . . . . . . . . . . . . . . . . .$89,500 COMPACTORS
IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean $69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000 (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500 LANDSCAPING
Case/IH 485 Utility Tractor, 1986, Case 3 cyl dsl engine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd angle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500 CRAWLER LOADERS
Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt .$37,500 Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000
OFF ROAD HAULERS Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready . . . . . . . . . . . . . . . .$127,500 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites . . . . .$87,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 CRAWLER TRACTORS
Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6" TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000 (5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALL Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB coupler, plumbed, 8’6” width, nice, work ready . .CALL Volvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing very good condition . . . . . . . . . . . . . . . . . . .$159,000 TRUCKS & TRAILERS
(2) 48' Box Vans w/Liftgates, Good Condition . .CALL AIR COMPRESSORS
IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL SPECIALS
(12) Allmand Light Plants, 2008-2010, diesel, s/a towtype, (4) MH lights, excellent . . . . . . . . .From $5,200
(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, BACKHOES winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea. Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000 Case 580L Rubber Tire Loader Backhoe, 1997, (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea. DRILLS John Henry Drill Mtd on Cat 320N, 1994, 24' mast, CRANES Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, Duraquip dust collection . . . . . . . . . . . . . . . .$150,000 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 MISCELLANEOUS Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom (2) Balderson Broom Attachment for Cat IT Machines, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. MOTOR SCRAPERS
ATTACHMENTS Cat 613C Water Wagon, 1994, 5000 gal drop tank, BUCKETS ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 PC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good Over 100 Excavator, Loader, Specialized & Grapple condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Buckets in Stock Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice -Call For Your Needs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, HYDRAULIC EXCAVATORS excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick couOthers Available Call pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000 Prices Are Negotiable - At Your Inspection Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber, All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC. operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER
Page 24 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Control, Guidance Allow Contractors to Remain Competitive Dave Perry, vice president of machine sales, welcomes the crowd.
A demonstration of the Cat 323F L excavator with 2D grade control in a simulated pipe-laying application.
Becoming more competitive is a goal shared by companies across the board, and smart business owners keep their eyes open around the clock for the tool, technology or system that can put them ahead. Milton CAT recently held three “Getting the Edge” demonstrations where it introduced the latest integrated technology systems built into the new line-up of Cat equipment. The machines showcased at the events were: • 323F L excavator with Cat 2D grade control (measures depth and slope) • D5K2 dozer with slope assist (2D blade control) • CS56B compactor with machine drive power (intelligent compaction) • 140M3 grader with cross slope (2D blade control) Attendees also were able to witness the unveiling of the new Cat D6T XW dozer with factory-installed GPS — the first machine of its kind shown in the United States. Depending on the time of day, the events were kicked-off with either a breakfast or a dinner, followed by a short PowerPoint presentation on the technology. Next came the main part, a demonstration of the machines at work. GoPro cameras were placed inside the cabs of the machines and live-streamed to two flat-screen monitors. Attendees sitting under a tent could watch the machines performing different tasks and see the operators inside the cab choosing the commands on the machine dash At the conclusion of the demonstrations, attendees were invited to ask questions display; narration was proand to try out the technology themselves. vided by SITECH Northeast’s Mike Jouben and attended,” added SITECH explained. As with all the latest integrated technology sysSam Meeker, of Caterpillar Northeast’s Tom Hogan. tems, you get the 2D grade control whether you buy or just in Peoria. Once the demonstrations rent this machine from Milton CAT. “The on-board cameras were complete, attendees “Cat’s a great piece of equipment as is, but the technoloreally took the customer were invited to stick around gy is an added bonus,” said Gary Lorden of Benjamin experience to a new level,” to ask questions and try out Builders. “As the owner, I look for all the benefits of the pursaid Jouben. “Seeing how the integrated systems for chase of the equipment and the investment and the asset that the operator used the techthemselves. I’m purchasing. So, for me, this is a great piece to the puznology from within the cab zle.” connected the dots for the Cat 323F L Excavator customers watching the With 2D Grade Cat D5K Dozer With Slope Assist Attendees look on as the D6T XW dozer is put through machines work.” Control The slope assist feature is a skill-replicating feature mak“This event helped us its paces. The embedded control ing the business end of a dozer that much easier to use, reach an elite group of custechnology allows the oper- Jouben said. Seen first on the small Tier IV Final K2 tractors tomers with a strong message in a tech rich environment that ator to dig directly to grade and to apply the correct amount coming out of Athens, Ga., it is due to be integrated into the said it all…the demo environment created with in-cab live of material; with a conventional machine, the operator has to D6N Tier IV Final tractor next. cameras and operators wearing microphones was key to stop and wait for the grade checker who’s constantly in and see CAT page 106 making sure our message got out to the customers who out of the dig area, with the resulting safety concerns, Jouben
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 25
Pine Bush Equipment Classes:
We are builders.
We are Kubota.
Classes are customized to suit your needs. Your location, or The PBE Training Center in Pine Bush, NY Forklift Class 7 Rough Terrain Forklift Class 5 Industrial Aerial Lifts Scissors and Booms
RTV-X900 Utility Vehicle
L39 Tractor/Loader/Backhoe
• 21.6 HP Kubota Diesel Engine • Exclusive Variable Hydro Transmission • Front and Rear Independent Suspension
• 37.4 HP Kubota Diesel Engine • Fully Intergrated Tractor, Loader and Backhoe • Quick Couplers and Auxiliary Hydraulics for Added Flexibility
Bucket Truck Certification Heavy Equipment Class: Excavator Backhoe Bulldozer Skid-steer and much more GHS Class Work Zone & Flagging Class Trench Safety and Shoring Chain Saw & Wood Chipper Class NEW - Workplace Violence
KX040-4 Compact Excavator
KX057-4 Compact Excavator
• 42.4 HP Kubota Diesel Engine • Optional Hydraulic 6-in-1 Blade • ECO-Plus Mode for Extra Fuel Economy
• 50 HP Kubota Diesel Engine • Optional Cab with Heat and Air Conditioning • ECO-Plus Mode for Extra Fuel Economy
Confined Space Ventilation Confined Space Atmospheric Testing
www.kubota.com
For more info contact Lee Drake: 845-399-5750 or e-mail: ldrake@pbeinc.com Join the many townships that support our training classes
SALES • RENTALS • PARTS • SERVICE • TRAINING
www.pbeinc.com
Pine Bush Equipment Co, Inc.
Holmes, NY Branch
East PBE, Inc.
97 Route 302 Pine Bush, NY 12566
24 Sybil Court Holmes, NY 12531
283 Pane Road Newington, CT
Phone: (845) 524-0970 Call Karie (ext 230)
Phone: (845) 524-0972 Call Damien (ext 215)
Phone: (845) 524-0974 Call Lisa (ext 232)
Our Holmes, NY Branch is a NAPA Auto Parts Location
Page 26 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
NEW LISTING
2007 KOBELCO SK210LC HYD EXCAVATOR, ID# UT14674, CAB, AIR CONDITIONING, HYDRAULIC QUICK COUPLER, BUCKET, UC @ 4613 HRS: 40-65% REM ................................................$59,000
2007 CAT 312CL HYDRAULIC EXCAVATOR, ID# UT14090, CAB, AIR CONDITIONING, RADIO, PATTERN CHANGER, UC @ 12033HRS, 24IN TG SHOES 77-81%, BUSHINGS 18-21% NOT TURNED, LINKS 51%, INTERNAL TRACKS 15%, SEGMENTS 75%, IDLERS 76%..................$68,000
1999 CAT 322BL HYDRAULIC EXCAVATOR, ID# UP14259, CAB, AIR CONDITIONING, STANDARD FRONT, HYDRAULIC QUICK COUPLER, BUCKET, PLUMBED FOR HAMMER USE, UC @ 10086HRS: 31.5IN SHOES 99%, LINKS 69-72%, BUSHINGS 84-92% ........................................................$64,500
2006 CAT 330DL HYDRAULIC EXCAVATOR, ID# UT14458, CAB, AIR CONDITIONING, DB LINK, UC @ 12918HRS, 32IN SHOES 84% REM, LINKS 3744%, BUSHINGS 37-44%, SEGMENTS 20%, INTERNAL TRACKS 97%, IDLERS 86%, ROLLERS 39-48% ......................................$90,000
2011 CAT 303.5DCR MINI HYD EXCAVATOR, ID# UP14477, CAB, AIR CONDITIONING, PATTERN CHANGER, TRAVEL PEDALS, 2-WAY AUX HYDRAULICS, PIN GRABBER COUPLER, BUCKET, HYDRAULIC THUMB, BACKFILL BLADE, RUBBER SHOES ................................................$39,500
NEW LISTING
NEW LISTING
2006 CAT D7R XR W TRACK-TYPE TRACTOR, ID# UP12290, CAB, A/C, ANGLE BLADE, WINCH, SWEEPS, AIR SEAT SUSPENSION, UC @ 5,587 HRS., SHOES @ 64%, BUSHINGS 84%, LINKS 84%, SEGMENTS 65%, CARRIERS 82% $240,000
2012 CAT D5K LGP TRACK-TYPE TRACTOR, ID# UP14184, EROPS, AIR CONDITIONING, PAT BLADE, DRAWBAR, SYSTEM ONE UC @ 2074 HRS: 26IN SHOES 76%, LINKS 79-82%, IDLERS 90%, ROLLERS 71% AVG, CARRIERS 67-73%, BUSHINGS 82/94% ....................$126,000
2006 KOMATSU D61EX-15 TRACTOR, ID# UT14695, EROPS, AIR CONDITIONING, JOYSTICK STEERING, PAT BLADE, DRAWBAR, UC @ 7349 HRS: 60-75% REM ........................$61,000
2010 CAT 963D TRACK-TYPE LOADER, ID# UT14224, WASTE HANDLING ARRANGEMENT, EROPS, AIR CONDITIONING, HYD SINGLE CONTROL THUMB ROLL, V LEVER CONTROL, MP BUCKET, SYSTEM ONE UC @ 10096 HRS, 18IN DG SHOES 35%, LINKS 46-58% ....$115,000
2005 CAT D10T TRACK TYPE TRACTOR, ID# UP12550, EROPS, AIR CONDITIONING, FINGER TIP STEERING, SS RIPPER, U BLADE, UC @ 19396 HRS, 28IN SHOES 86-88%, LINKS 88-96%, SEGMENTS 99%, IDLERS 76-92%, ROLLERS 99%, CARRIERS 47-50% ..........................$740,000
2012 CAT 299DXHP COMPACT TRACK LOADER, ID# UT14689, CAB, AIR CONDITIONING, 1SPEED TRAVEL, RIDE CONTROL, ELECTRIC QUICK COUPLER, STEEL TRACKS ..........$70,000
2013 CAT 259B COMPACT TRACK LOADER, ID# UT14357, CAB, AIR CONDITIONING, ELEC CONTROL FOR IMPLEMENTS, 2-SPEED TRAVEL, STANDARD FLOW HYDRAULICS, MANUAL QUICK COUPLER, BUCKET, UC @ 521HRS: 13IN TRACKS 75% REM, STEEL ROLLERS 98% .......... ......................................................................$50,000
2014 CAT 262D SKID STEER LOADER, ID# UT14483, CAB, A/C, CAMERA, ENGINE HEATER, ELEC CONTROL FOR IMPLEMENTS, 2-SPEED TRAVEL, LOW FLOW HYDRAULICS, PROPORTIONAL HYDRAULICS, ELECTRIC HYDRAULIC COUPLER, BUCKET, CAT TIRES..................$51,000
2014 CAT 236D SKID STEER LOADER, ID# UT14784, CANOPY, 1-SPEED TRAVEL, LOW FLOW HYDRAULICS, MANUAL QUICK COUPLER, BUCKET, CAT TIRES 50% @ 226 HRS ......$39,000
2006 CAT 972H WHEEL LOADER, ID# UP14553, EROPS, AIR CONDITIONING, RETARDER, WHEEL STEERING, 2-VALVE RIDE CONTROL, LOADRITE WEIGHING SYSTEM, BUCKET, 26.5R25 TIRES @ 13690HRS, RF 57%, LF 48%, RR 32%, LR 23% ......................................$118,000
2008 CAT 950H WHEEL LOADER, ID# UP14159, EROPS, AIR CONDITIONING, RIDE CONTROL, GP BUCKET, MICHELIN TIRES @ 4889 HRS:, FRONTS 50%, REARS 60%......................$165,000
2006 CAT 525C WHEEL LOG SKIDDER, ID# UP14552, EROPS, AIR CONDITIONING, RETARDER, WHEEL STEERING, 12.5 SQ FT CR BUNCH GRAPPLE, SINGLE FUNCTION ARCH W/ WINCH, FIRESTONE TIRES @ 13129 HRS: 99% REM............................................................$105,000
NEW LISTING 2012 CAT TH514 TELEHANDLER, ID# X120198, CAB, AIR CONDITIONING, BLOCK HEATER, HITCH, HYDRAULIC IT COUPLER ............$89,250
WWW.CLEVELANDBROTHERS.COM USED EQUIPMENT - 855.545.0267 ext. 1
2011 CAT CP56 VIB SOIL COMPACTOR, ID# UP14121, CAB, AIR CONDITIONING, 84 IN VIBRATORY PADFOOT DRUM, LEVELING BLADE, FIRESTONE TIRES @ 1204 HRS 75/83%$137,000
2002 CAT AP655C ASPHALT PAVER, ID# UT14693, POWER HEIGHT ADJUSTMENT, 8-16B SCREED EXTEND-A-MAT SCREED, MANUAL BURNER SYSTEM, POWER SLOPE CONTROL, OSCILLATING 8FT PUSH ROLLER, LH/RH 1FT AUGER EXTENSIONS ................................$49,000
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 27
CATERPILLAR 16, Transmissions Used, #9M8300/42387 PETERBILT 13-210,224,265,281,300,310,320,330,335,340, 341,346,348,348A,348M,348N,348S,349,349A,351,351A,35 1ST,352A,352M,352S,353,357,358,358A,358M,358ST,359,3 59A,359B,359M,359S,359ST,362,367,372,375,376,377,378, 379,379EXHD,381,383,385,386,CB300, Engine Rebuilt, #6I3479/2562 CATERPILLAR 120M2, Hitch Used, #3377511/51815 CATERPILLAR 216,216B,216B2,216B3,226,226B,226B2, 226B3,228,232,232B,232B2,232B3,236,236B,236B2,236B3, 236D,242,242B,242B2,242B3,242D,246,246B,246C,246D,24 7,247B,247B2,247B3,248,248B,252,252B,252B2,252B3,256, 256C,257,257B,257B2,257B3,257D,259D,259B,259B3,262,2 62B, Bucket, Other New, #THSB/56740 CATERPILLAR 216,216B,216B2,216B3,226,226B,226B2, 226B3,228,232,232B,232B2,236,236B,236B2,236B3,236D,2 42,242B,242B2,242B3,242D,246,246B,246C,246D,248,248B ,252,252B,252B2,252B3,256C,262,262B,262C,262C2,262D, 268B,272C,272D,272D XHP, Counterweight Used, #3455147/60277 CATERPILLAR 257,257B,257B2,257B3,257D, Blade, Angle Used, #2315275/61395 CATERPILLAR 304CR,304.5,305CR, Bucket, GP New, #3031340/53009 CATERPILLAR 311, Hydraulics Rebuilt, #4I7603/54757 CATERPILLAR 311, Swing Drive Used, #7I7761/57080 CATERPILLAR 311, Track Frame Used, #1089178/57365 CATERPILLAR 311,312, Booms Used, #5I3412/54544 CATERPILLAR 314, Blade, Other Used, #3387943/51608 CATERPILLAR 314D LCR, Blade, S Used, #2824578/62303 CATERPILLAR 314D LCR, Cab, Other Used, #3467866/62302 CATERPILLAR 320, Final Drive Rebuilt, #7Y1571/37840 CATERPILLAR 320,321,322C,325C,330C, Bucket, GP Used, #1325052/54432 CATERPILLAR 325C, Ripper Used, #WBRT3/50825 CATERPILLAR 325C,304.5,304CR,305CR, Bucket, GP New, #2277268/53007 CATERPILLAR 330C, Bucket, GP Used, #3029013/32549 CATERPILLAR 345,345A,345B,345B II,345BL II,345BL II VG,345BL II LR,345BL LC II,345BL LR,345BL ME,345BL ME II,345BL UHD,345CL,345CL ME,345CL UHD,345CL VG,345CL WVG,345DL,345DL ME,345DL VG,345L,349DL,349EL, Track, Steel Used, #3012287/52976 CATERPILLAR 345B, Engine Used, #1382001/37356 CATERPILLAR 345B, Final Drive Rebuilt, #1362847 CATERPILLAR 365B, Bucket, GP Used, #1754487/49221 PETERBILT 379,379EXHD, Truck Components - Engine Used, #1802283 CATERPILLAR 385,385B,385B ME,385BL,385BL LR,385BL ME,385BL UHD,385C,385C FS,385C LRE,385C ME,385CL,385CL LR,390DL, Swing Drive Rebuilt, #1484626/57063 CATERPILLAR 416C,416D,416E,420C,420D,420E,426C, Bucket, GP New, #1345869/30959 CATERPILLAR 420F, Bucket, GP Used, #3377388/51594 CATERPILLAR 730, Cylinder, Hoist (Bed) Used, #2854032/61356
CATERPILLAR 730, Cylinder, Hoist (Bed) Rebuilt, #2854032/61357 CATERPILLAR 769D, Engine Rebuilt, #1230206/32272 CATERPILLAR 773B, Torque Converters Used, #6T4674/42945 CATERPILLAR 773D, Transmissions Rebuilt, #9G9624/56648 CATERPILLAR 824B,836,836C, Torque Converters Rebuilt, #1431234/56095 CATERPILLAR 824C, Differential Used, #4V1073/31078 CATERPILLAR 824C, Differential Used, #3V4030/31079 CATERPILLAR 824C, Transmissions Used, #3P6809/33473 CATERPILLAR 826H, Engine Used, #2258923/61095 CATERPILLAR 836, Cab, EROPS Used, #1293276/2846 CATERPILLAR 836C, Engine Used, #1438336/62237 CATERPILLAR 836G, Cab, EROPS Used, #1793710/45412 CATERPILLAR 836G, Torque Converters Rebuilt, #1457109/52159 CATERPILLAR 930G,938G, Transmissions Used, #2348866/32134 CATERPILLAR 950G,962G,IT62G, Axle Used, #1383121/35700 CATERPILLAR 962G, Engine Rebuilt, #1168671/34551 CATERPILLAR 970F, Torque Converters New, #1463329/43970 CATERPILLAR 980C, Arm Used, #9V6026/3062 CATERPILLAR 980G, Cab, EROPS Used, #1097922/47687 CATERPILLAR 980G, Final Drive Rebuilt, #1605585/8037 CATERPILLAR 980G,980G II, Axle Rebuilt, #1725385/34669 CATERPILLAR 980G,980H, Bucket, Light Material Used, #1952647/46925 CATERPILLAR 980H, Axle Rebuilt, #2327558/34667 CATERPILLAR 980K, Differential Used, #3880375/58737 CATERPILLAR 980K, Differential New, #3880373/58489 CATERPILLAR 988B, Transmissions Rebuilt, #9W0782/32318 CATERPILLAR 988B,988F, Bucket, Rock Used, #9V2019/60984 CATERPILLAR 988F,988F I, Final Drive Used, #4E2664/43974 CATERPILLAR 988G, Cab, EROPS New, #1289664/29291 CATERPILLAR 988G,988H, Booms Rebuilt, #2550042/51861 CATERPILLAR 988H, Torque Converters Rebuilt, #1285303/52676 CATERPILLAR 988H, Torque Converters Rebuilt, #1285303/52676 CATERPILLAR 990,990 II,990F,990H, Bucket, Rock Used, #2831880/61927 CATERPILLAR 992C,992D, Bucket, Rock Used, #5V5601/60577 CATERPILLAR 992C,992D, Bucket, Rock Used, #9U3013/59275 CATERPILLAR 992C,992D, Cab, EROPS Used, #2V5075/46948 CATERPILLAR 992C,992D, Differential Used, #6W7420/59790 CATERPILLAR 992C,992D, Transmissions Rebuilt, #3P9241/59831 CATERPILLAR 992C,992D,690B, Cab, EROPS Used, #9V5306/30599 CATERPILLAR D10, Cab, EROPS Used, #3T8106/36149 CATERPILLAR D10L,D10, Torque Converters Rebuilt, #6P6412/31183 CATERPILLAR D10N, Engine Rebuilt, #1056574/55963
WWW.CLEVELANDBROTHERS.COM USED PARTS - 855.545.0267 ext. 2
CATERPILLAR D10R, Equalizer Bars Rebuilt, #2223676 CATERPILLAR D10R, Torque Converters Rebuilt, #1102769/35220 CATERPILLAR D10T, Counterweight Used, #2235568/39840 CATERPILLAR D11,D11N, Torque Converters Rebuilt, #3T9677 CATERPILLAR D11,D11N, Track Frame Rebuilt, #6Y2686/54865 CATERPILLAR D11,D11N, Track Frame Rebuilt, #6Y2687/54866 CATERPILLAR D11N, Equalizer Bars Rebuilt, #2072683 CATERPILLAR D11N, Track Frame Used, #6Y2686 & 6Y2687 CATERPILLAR D11N, Transmissions Rebuilt, #7T8168/56623 CATERPILLAR D11R, Equalizer Bars Rebuilt, #2072684 CATERPILLAR D11R, Torque Converters Used, #1210030/47691 CATERPILLAR D11R,D11T, Final Drive Rebuilt, #3242343/46124 CATERPILLAR D350E, Cab, EROPS Used, #7U4400/40232 CATERPILLAR D350E, Engine Used, #1274527/39865 CATERPILLAR D5H, Winch Used, #08929/51595 CATERPILLAR D5M,D5M LGP,D5N, Blade, Angle New, #2096089/32261 CATERPILLAR D6,D6T,D7, Winch Used, #2796427/48648 CATERPILLAR D6,D6T,D7, Winch Used, #3710956/51604 CATERPILLAR D6K, Blade, Other Used, #2401521/59967 CATERPILLAR D6N LGP, Blade, Angle Used, #2236304/38985 CATERPILLAR D6N LGP, Torque Converters Rebuilt, #1880502/44386 CATERPILLAR D6R, Equalizer Bars Rebuilt, #2012078/31951 CATERPILLAR D6R, Equalizer Bars Core, #2012078/38992 CATERPILLAR D6T XW, Blade, Angle Used, #3341764/58556 CATERPILLAR D7H, Equalizer Bars Rebuilt, #1414690/28344 CATERPILLAR D8,D8L,D9N, Torque Converters Rebuilt, #9P4890 CATERPILLAR D8R, Transmissions Used, #2192624/47692 CATERPILLAR D8R,D8R II,D8T, Blade, SU Used, #8E6154/61194 CATERPILLAR D8R,D8T, Blade, Other Used, #2627670/54790 CATERPILLAR D8T,D8T LGP,D8T LGP WDA,D8T II,D8T WDA,D8T XL, Ripper Used, #2156422/55537 CATERPILLAR D9L, Blade, U Rebuilt, #9J7420/42578 CATERPILLAR D9N, Blade, SU Used, #7T5384/47147 CATERPILLAR D9N,D10N,D11N, Cab, EROPS Used, #8E1085/48556 CATERPILLAR D9R,D10R,D11R, Cab, EROPS Used, #1118549/50331 CATERPILLAR IT38, Bucket, GP Used, #QH350GP/60448 VOLVO WG42T, Truck Components - Engine Used, #6I2642/59558
D8R SU BLADE 8E6154, Stk# 61194
988B/F Spade Nose Bucket 7Y3 9V0219, Stk# 60984
824C Transmission, Rebuilt 3P6809, Stk# 33473
990II/H Spade Nose Bucket 11.2 Y3 2831880, Stk# 61927
Page 28 â&#x20AC;˘ August 12, 2015 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE
Westchester Tractor, Inc. 60 International Blvd â&#x20AC;˘ Brewster, NY 10509 RS NEW CHIPPE RS & GENERATO K NOW IN STOC
1997 New Holland 675E
2012 Bomag BW211D-40 Roller
1993 Kubota KX101 Excavator
845/278-7766 Fax: 845/278-4431 E-mail: equip@wtractor.com
Now Serv ing All of Connectic ut
LATE MODEL EQUIPMENT
TLBâ&#x20AC;&#x2122;S: 1980 Ford 445, Open Cab, 4645 Hrs ......................................................................................$8,400 1986 Ford 655A, 4 Stick with 2 Stick Conversion Kit, Cab....................................................$14,995 2001 John Deere 790 Tractor Loader, ROPS, 2wd, 3 point hitch, weight box, 1414 Hrs.................. ......................................................................................................................................SOLD $4,995 1997 New Holland 675E, Cab w/Heat, Tilt Bucket, 4 Stick, 1950 Hrs ..................................$28,995 2005 New Holland TC35, with loader and backhoe, super steer, hydro transmission, 3468 Hrs ...... ....................................................................................................................................SOLD $10,995 DOZERS: 2006 New Holland D85, open ROPS, excellent mechanical condition, 1421 Hrs ......SOLD $39,995 COMPACT TRACK LOADERS: 2013 New Holland C238, Full cab, pilot controls, T4 engine 250 Hrs ..................................$56,000 CRAWLER LOADERS: 1987 Deere 455D, Open Cab, 3370 Hrs..................................................................................$9,995 ROLLERS: 2012 Bomag BW211D-40 Roller, Vibratory 84â&#x20AC;? smooth drum roller, cab with heat/AC, 2 Hrs.......... ..............................................................................................................................................$90,995 SKID STEERS: 2002 Bobcat S185, Open Cab, Manual Coupler, Non Pneumatic Tires, 4730 Hrs ................$12,995 2005 Bobcat T190, Hi Flow, Mechanical Controls, Full Cab, 2989 Hrs ................................$29,995 2014 New Holland L220, Full Cab, Hi Flow, Warranty Good Until 11/25/2015, PT/Electric 11/25/17, 250 Hrs ..................................................................................................................................$35,000 2014 New Holland L223, Full Cab, Hi Flow, Warranty Good Until 11/24/2015, PT/Electric 11/24/17, 68 Hrs ....................................................................................................................................$36,000 2013 New Holland L230, Full cab, pilot controls, hi flow, 473 Hrs, SN:2673 ......................$44,500 2013 New Holland L230, Full cab, pilot controls, hi flow, 127 Hrs, SN:2655 ......................$45,995
EXCAVATORS: 2006 Bobcat 335, Open Cab, Manual Coupler, Hydraulic Thumb, 922 Hrs ................SOLD $32,995 1996 Cat 311B, Cab, 13,878 Hrs ..........................................................................................$27,995 2003 Cat 303CR, ROPS/FOPS, thumb, 2488 Hrs..................................................................$19,000 2004 Kobelco SK115SR, Full Cab, Blade, pattern changer, Plumbed, 7485 Hrs ..................$49,995 2007 Kobelco SK215, Full Cab, pattern changer, new Geith thumb, 36â&#x20AC;? bucket, 1490 Hrs $142,500 1993 Kubota KX101, Cab, New Rubber Tracks, 4119 Hrs ....................................................$15,000 2004 Samsung SE50-3, Cab, 3 Buckets, Werk Brau quick Coupler 5858 Hrs ......................$19,995 SCREENERS: 2014 Vibrotech SCM27, 5/8â&#x20AC;? screen, towable, 150 Hrs ............................................SOLD $27,995 2014 Vibrotech SCM115T Trommel, ½â&#x20AC;? screens, 64 Hrs ..................................................$129,995 CHIPPERS/STUMP GRINDERS 2008 Alitec DC1217, 12â&#x20AC;? Capacity, Winch, Auto Feed, 1487 Hrs, CAT Turbo Engine ..........$19,995 2012 Bandit 150XP, 97 HP CAT engine, winch, auto feed, 365 Hrs ......................................$29,995 2011 Bandit 200XP, 12â&#x20AC;? disc chipper, winch, auto feed, hand crank swivel 1150 Hrs ...................... ....................................................................................................................................SOLD $25,995 2001 Bandit 254, 125HP Deere engine, auto clutch, hydraulic winch with rope ........SOLD $31,995 2012 Bandit 1590XP, 160 HP Cat Engine, 25â&#x20AC;? Wide Infeed, Auto Feed, 700 Hrs........SOLD $46,995 2002 Bandit 1890HD, 18â&#x20AC;? Drum, Hydraulic Chute and Jack, Winch, Dual Wheels, 1594 Hrs$37,995 1998 Morbark Hurricane 2400, 18â&#x20AC;? drum, winch, 110HP Perkins engine, hand crank swivel discharge chute, 3550 Hrs ........................................................................................................$21,995 WHEEL LOADERS: 2004 TCM E806, Open Cab, 5594 Hrs ..................................................................................$15,000 MISCELLANEOUS: 2007 Kubota 1100CW RTV, Cab, mount frame for Boss V plow ................................SOLD $11,995 2011 Kubota SQ33 USASW Generator, 33.1 KVA, 26.5W, 240V, 3 Phase, 4 Pole..................$9,000
See dealer for financing details. CNH Capital America LLC standard terms and conditions apply. Subject to customer credit qualifications. CNH Capital America LLC reserves the right to cancel any program without notice.
VISIT OUR WEB SITE
1998 Morbark Hurricane 2400
2014 New Holland L220
2014 New Holland L223
AT WWW.WTRACTOR.COM
%15)0-%.4 42!),%23 VISIT BEST LINE FOR THE HIGHEST QUALIT Y
'3, 04
50 Ton Detachable Gooseneck Wetline, Dual Duel Axle Air Ride Suspension, 4â&#x20AC;&#x2122; Rear Riser, Wheel Covers, Taper Beam Design
Capacity: 100,000 lbs.
'3,
â&#x20AC;&#x153;
"EST ,INE IS MORE THAN AN AUTHORIZED DEALER WE RE A SATISFIED CUSTOMER
â&#x20AC;? ,OWBOYS 4HAT ,OAD
&RONT 2EAR 4HE 5LTIMATE )N 6ERSATILITY
Capacity: 110,000 lbs.
804 Capacity: 40,000 lbs.
55 Ton Self-Lifting Detachable Lowboy, Tri Axle Air Ride Suspension, Stressed for 4th Axle or Booster, ABS Air Brake Axles
Easy Loader With Hydraulic Ramps, 20 Ton Air Brakes, 8â&#x20AC;? Loading Angle Low Profile, All Wheel ABS
Be prepared for any loading situation with our GSL/BR series of Lowboys.
V ISIT ONE OF OUR CON V ENIENT LOCATIONS! !LLENTOWN s #ENTRE (ALL s (ARRISBURG s -ECHANICSBURG s -UNCY s 0HILADELPHIA s 3HIPPENSBURG s 3TATE #OLLEGE s 4OWANDA s 5NIONTOWN s 7EST #HESTER
"%34 s WWW "EST,INE COM s &IND 5S /N See Best Line for full details. Dealer not responsible for typographical errors. Photos may not represent actual units. 15BLEB-PHC-CEG081215
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 29
FINANCING AVAILABLE 286 Central Ave. South Kearny, New Jersey 07032
580 Creek Road Delanco, New Jersey 08075
800-255-5512
856-288-3700
Phone 973-589-4100 • Fax 973-589-4811
Fax 856-393-7699
E-mail: info@tes-inc.net • Website: www.tes-inc.net
SOUTH KEARNY, NJ
DELANCO, NJ
2000 Manitowoc 2250 300-ton, Series III ctwt option, 260' boom, Cummins diesel, S/N: 2251051 P.O.R.
2002 Manitowoc 999 275-ton, 200’ main boom, 60’ jib, Aux winch, Cummins diesel P.O.R.
2001 Link-Belt RTC 8040 SII 40-ton, S/N: F7J1-5291, 105’ main boom, 28’-51’ 2-piece jib, Hydro gas ride, Aux winch, Rear steer indicator P.O.R.
2007 Kalmar DCE 140-6 31,000 Lbs. @ 24” LC, Enclosed Cab w/Heater, CAT Diesel C6.6, Dana TE1300 Trans, 167” Triple Mast, SS/FP, 96” Forks P.O.R.
1980 Manitowoc 4100W SII 230-ton, S/N: 41649, 150' boom P.O.R.
1999 Link-Belt LS248 HII 200-ton, "C" ctwts, Ctwt removal system, 3rd drum, 200' main boom, 2 winch, S/N: H3I9-2238 P.O.R.
2001 Manitou MRT 1850 Rough Terrain Rotating Telescopic Handler, 10,000 lb. Capacity, 48” Long Forks, 58’ of Lift, Full Cab w/Heater & Wipers, 4WD P.O.R.
2005 Manitex 1770C 17- Ton, S/N 119511, 18,042 miles, Ford F750 210 HP CAT diesel, 23’ jib, 20’ wood deck P.O.R.
2007 Link-Belt 218 HSL 110-ton, 150’ main boom, “ABC” Ctwts, Block/Ball, diesel engine P.O.R.
2008 Link-Belt RTC 8090 90-ton, 140’ main boom, 35’ – 58’ jib, 2 winches P.O.R.
2009 Shuttlelift 3340B S/N: 321134, 10.5-ton, Diesel engine, Independent outriggers, 13’-32’ boom w/12’-28’ jib, Block & ball, New York City swing lock P.O.R.
2007 Demag AC200-1 S/N: 33167, 240-ton, Drive axle: 10x8x8, ZF automatic transmission, 6 cylinder diesel engine, 223’ main, 108’ jib P.O.R.
Authorized Dealer
Page 30 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Professional Women in Construction Officials Re-Route Holds Transportation Forum in NYC Pipeline to Avoid William Fife, principal, The Fife Group and senior advi- ture improvements addressing “safety; state of good repair; sor, Weidlinger Associates, the moderator of Professional mobility; livability; resiliency; equity and economic Women in Construction’s (PWC) Transportation Forums for growth.” The city’s capital roadway reconstruction program, which the past 20 years, set the tone for the annual regional update held the morning of July 15th at the Yale Club in N.Y. City, she leads, includes Mayor de Blasio’s $300M Great Street saying, “It is critical to learn of investments being made in Program for the “design and construction of four major artetransportation and hear that we’re getting the right kind of rials and boulevards”: Atlantic Avenue and 4th Avenue in Brooklyn; Grand Concourse in the Bronx; and Queens percentages for WMBE participation.” Each speaker stressed a firm commitment to increasing Boulevard in Queens. She stressed D/MWBE participation and that the NYCMWBE participation. Several noted that Gov. Cuomo has raised the goal from 20 to 30 percent for NYS, and said that their agency would meet or exceed the objective. Sonia Pichardo, regional director, NYSDOT, discussed the NYC region’s upcoming construction program, which will be approximately $600 million per year for the next two fiscal years. NYSDOT will be advancing a range of projects, both within the region and across the state, that will offer opportunities for MWBEs, from bridge rehabilitation to highway paving. Dana Hecht, executive regional manager, Team B, project management, NJDOT, spoke of a robust capital program with almost 100 projects/contracts in FY15 and forecasted for FY16. Four large multi-contract projects spanning Pearl Perkins photo into 2020 and totaling more than $2B include the Manahawkin major bridge (L-R) are William Fife, The Fife Group & Weidlinger Associates; Sonia Pichardo, NYSDOT; Michael Massiah, PANYNJ; Eve Michel, MTACC; Dana rehab and Pulaski Skyway. An internal WIT (Women in Hecht, NJDOT; Rosa Rijos, NYC DOT; and Barbara Armand, PWC and Transportation) program focuses on Armand Corp. “mentoring, training for successful upward mobility and professional growth….” A trainee/apprenticeship program run through DOT will help gain dual certification. Eve Michel, chief architect and V. P. of planning, design the civil rights unit is targeted to help women, minorities and disadvantaged individuals acquire construction skilled crafts & development, MTA Capital Construction, spoke of 40 projects set through May 2016 and budgeted at over $1B through NJDOT funded construction projects. Diversity, said Hecht, “and the varied experiences and which will generate $4.5B in economic activity. The MTA’s perspectives that it brings… result in the most successful Small Business Mentoring Program and Small Business Federal Program aim to form “long term quality relationprojects and programs.” Michael G. Massiah, chief, capital planning, execution & ships …and stimulate growth.” Current MWBE opportunities include Grand Central asset management, PANYNJ, acknowledged “women’s considerable contributions to construction” historically in the Caverns; MetroNorth drainage improvements in the Bronx; region and spoke of the PANYNJ’s 10 year $27B capital pro- and storm resiliency for the LIRR and NYC Transit. MTA megaprojects include the award-winning Fulton Center linkgram as “a living plan that adapts to realities.” Calling the PANYNJ a composition of several line depart- ing the NYC subway and the NJ PATH; the 7 Line ments each with its own operating and capital conditions, he Extension; the Second Avenue Subway, the first major subdiscussed TransHudson improvements on the Goethals, way expansion in over 50 years; and East Side Access, the Bayonne and GW Bridges; over $3B investment in the largest infrastructure in the United States. “The health and prosperity of our economy depends on a PATH system; work at LaGuardia and Newark Airports; the Port Department’s intermodal improvements; and the WTC safe, reliable transit system that will continue to grow and adapt along with our region,” said Michel. site construction. Event sponsors were: HAKS; Parsons; A. Esteban & The PANYNJ aims “to improve the transportation system that connects the Continental U.S. with NYC and the world,” Company. For more information, call 212/486-7745 or visit said Massiah. Speaking of the “five year $6.3 B capital program” Rosa www.pwcusa.org/ny. Rijos, assistant commissioner, Roadway Capital Program (This story also can be found on Construction Equipment management, NYCDOT, outlined transportation infrastruc- Guide’s Web site at www.constructionequipmentguide.com.)
Fragile N.Y. Forest By Mary Esch ASSOCIATED PRESS
ALBANY, N.Y. (AP) A section of the planned Constitution Pipeline, designed to bring natural gas to New York City and New England, has been redrawn to avoid a 1,000-acre private forest with fragile wetlands. Christopher Stockton, spokesman of the 124-mi. pipeline to bring cheap gas north from Pennsylvania’s shale fields, confirmed the route change July 28. Stockton said the change adds almost 3 mi. to the route and affects 11 landowners, who recently signed right-of-way agreements. The new route avoids the private Charlotte Forest in Harpersfield, about 50 mi. southwest of Albany. The property is owned by the heirs of forester Henry Kernan. Family members have managed the forest for 70 years and were among the pipeline opponents. Construction would have required clearing trees from a mi.-long, 75-ft.wide swath across the Kernans’ forest between two ecologically rare sphagnum bog lakes. “Since we introduced this project more than three years ago, we have adopted more than 300 route changes affecting more than 50 percent of the project,’’ Stockton said. “Most of these route changes were the direct result of feedback received from landowners, permitting agencies and data collected as a result of field surveys.’’ The project has Federal Energy Regulatory Commission approval contingent on receipt of a water quality certificate from the state Department of Environmental Conservation and a Clean Water Act permit from the Army Corps of Engineers. The department has no timetable for completing a review of the project’s potential impact on streams and wetlands, spokesman Tom Mailey said. Stockton said Constitution Pipeline LLC plans to start construction in September. The line will end in New York’s Schoharie County, where it will connect with existing lines. A second pipeline, the 325-mi. Northeast Energy Direct project proposed by Kinder Morgan, is in earlier stages of planning on a roughly parallel route. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
TAKE A SMALL STEP TO GET HEALTHY www.smallstep.gov
Multi One Articulated Loaders In Stock NEW IHI Excavators Vibrotech Screens 215/679-5958 JD Equipment www.jdequip.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 31
Page 32 â&#x20AC;˘ august 12, 2015 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE
#M BODIBS E.BDIJ OFS Z DPN 6T FE
#"/$)"3%
#"/$)"3% 64& % & 26* 1.& /5
5 )& ' 06/%"5 * 0/ 0'
"/: (00% 803, 4* 5 &
FIVE STAR EQUIPMENT, INC. CALL
800-457-1616
fax
2011 Cat 416E Backhoe, Stk# 31152, 2764 Hrs, Cab w/Air, Turbo, 4x4, Ext. Dipper, 19.5 Tires, 24â&#x20AC;? Bkt ......$57,000
607-775-1238
2014 Deere 624K Loader, Stk# 23128, 250 Hrs, Cab w/Air, RC, Std Rear Hitch, 3.5 Yd Pin-on Bkt ..................$177,000
ASK ABOUT FINANCING ON USED EQUIPMENT EMAIL lasickitom@fivestarequipment.com
2007 Komatsu D39EX Dozer, Stk# 31196, 6,569 Hrs, ROPS, Rear Screen, PAT Blade, 20â&#x20AC;? Tracks, Winch .. ................................................$38,000
2002 Tigercat 630B Skidder, Stk# 31250, 2071 hrs, Cab w/ Air, Dual Function Grapple, Less Winch $25,000
2008 Hit ZX200LC Excavator, Stk# 30831, 2966 Hrs, 32â&#x20AC;? Pads, 9â&#x20AC;&#x2122;7â&#x20AC;? Arm .. ..............................................$118,000
2010 Deere 850J Dozer, Stk# 13373, 1918 Hrs, Cab w/Heat & AC, Std Track, 3 Spl, Ripper, 128â&#x20AC;? Blade ......$173,000
2011 Cat 938H, Stk# 31159, 1032 Hrs, Cab w/Air, Diff Lock, 20.5 Tires, GP Bkt ..............................................$155,000
Pennsylvania Locations: Dunmore â&#x20AC;˘ Athens Waterford â&#x20AC;˘ Williamsport
New York Locations: 2011 Deere 644K Loader, Stk# 23113, 1384 Hrs, Cab w/ Air, RC, 23.5 Tires, 4.25 Yd Bkt ..........$193,000
2011 NH B95B Backhoe, Stk# 31156, 833 Hrs, Cab w/Air, Turbo, 4x4, Ext. Dipper, Aux Hyd, MP Bkt, 24â&#x20AC;? Bkt .......... ..................................................$58,000
Kirkwood â&#x20AC;˘ Syracuse Rochester â&#x20AC;˘ Orchard Park
For Our COMPLETE INVENTORY of Used Equipment with Photos and Detailed Descriptions visit www.fivestarequipment.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 33
Page 34 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Cayuga • Cortland • Genesee • Greene • Livingston • Monroe • Onondaga • Ontario • Orange • Orleans • Oswego • Saratoga • Seneca • Tioga York... •New Tompkins • Washington • Wayne • Wyoming • Duchess • Nassau • Orange • Orleans • Oswego • Putnam • Suffolk • Tioga • Washington •Cayuga • Cortland • Genesee • Greene • Livingston • Monroe • Onondaga • Ontario • Orange • Orleans • Oswego • Saratoga • Seneca • Tioga • Tompkins • Washington • Wayne • Wyoming • Duchess • Nassau • Orange • Orleans • Oswego • Putnam • Suffolk • Tioga • Washington • Cayuga • Cortland • Genesee • Greene • Livingston • Monroe • Onondaga • Ontario • Orange • Orleans • Oswego • Saratoga • Seneca • Tioga
‘Empire State’ Highway Project Lettings
The New York State Department of Transportation received bids for transportation-related improvement projects. Following is a list of some of the projects let. County: Monroe Project No.: D262807 Project: Milling and resurfacing on Route 441, Route 250 and Route 31 in the towns of Brighton, Penfield, Pernton and village of Fairport. Contractors and Bid Amounts: • Villager Construction Inc. — $5,636,873 • Sealand Contractors Corporation — $5,763,000 County: Wayne Project No.: D262813 Project: Canandaigua Road bridge replacement (with multi-girder two lane structure) over the Erie Canal, town of Macedon. Contractors and Bid Amounts: • Economy Paving Company Inc. — $4,377,771 • Sealand Contractors Corporation — $4,539,000 • Vector Construction Corporation — $4,607,190 • Cold Spring Construction Company — $4,796,045 • Ramsey Constructors Inc. — $4,888,962 • C P Ward Inc. — $5,308,611 • Slate Hill Constructors Inc. — $6,489,734 Counties: Erie and Niagara Project No.: D262819 Project: Repair nine bridges on Routes 1-190, 951A, 62 and 33 in the cities of Niagara Falls and Buffalo and the town of Amherst. Contractors and Bid Amounts: • Oakgrove Construction Inc. — $1,918,634 • Nichols Long & Moore Construction — $2,142,805 County: Sullivan Project No.: D262845 Project: Route 17 small culvert contract, town of Rockland. Contractors and Bid Amounts: • Precision Industrial Maintanance — $2,112,374 • Constar Inc. — $3,348,160 • Arold Construction Company Inc. — $4,654,160 Counties: Broome, Chenango, Delaware, Otsego, Schoharie, Sullivan and Tioga Project No.: D262852 Project: Installation of epoxy paint pavement markings (261 mi.), on Routes I-81, I-86, I-88 and N.Y. 17. Contractors and Bid Amounts: • Accent Stripe Inc. — $1,598,171 • Denville Line Painting Inc. — $1,795,789 • Constar Inc. — $1,989,651 Counties: Allegany, Schuyler, Steuben and Yates Project No.: D262856 Project: Large culvert repair and replacement project at six sites on various state highways.
Contractors and Bid Amounts: • Ramsey Constructors Inc. — $1,709,682 • The L C Whitford Company Inc. — $1,958,887 • Villager Construction Inc. — $1,980,152 • C P Ward Inc. — $1,993,925 • Dolomite Prod/dba: A L Blades — $2,335,966 County: Monroe Project No.: D262868 Project: Bridge Rehabilitation to 940T over Brown’s Raceway/Genesee River in the city of Rochester. Contractors and Bid Amounts: • The Pike Company Inc. — $5,873,519 • The L C Whitford Company Inc. — $5,887,887 • Crane Hogan Structural Systems — $5,992,705 • Sealand Contractors Corporation — $6,743,000 County: Broome Project No.: D262648 Project: Concrete pavement repair on NYS Route 201 in the town of Union and Village of Johnson City. Contractors and Bid Amounts: • R De Vincentis Construction — $1,064,000 • Bothar Construction LLC — $1,068,739 • FAHS Construction Group — $1,165,156 • Lancaster Development & Tully — $1,358,216 County: Nassau Project No.: D262817 Project: 2.87 mi. of asphalt concrete milling and resurfac-
ing on N.Y. Route 27. Work includes PCC pavement repairs, traffic signal upgrades and drainage in the town of Hempstead. Contractors and Bid Amounts: • Intercounty Paving Associates LLC — $7,942,000 • Posillico Civil Inc. — $8,640,855 • A.L.A.C. Contracting Corporation — $10,810,810 Counties: Genesee, Livingston, Monroe, Ontario, Orleans, Wayne and Wyoming Project No.: D262838 Project: Standby highway repair contract. Contractors and Bid Amounts: • The L C Whitford Company Inc. — $1,070,000 • Keeler Construction Company Inc. — $1,074,400 • Villager Construction Inc. — $1,086,200 • C P Ward Inc. — Informal Counties: Nassau and Suffolk Project No.: D262842 Project: N.Y. 108 and N.Y. 106/107 mill and fill (drainage, traffic signals, signs and pavement markings), in Huntington and Oyster Bay. Contractors and Bid Amounts: • Intercounty Paving Associates LLC — $1,946,000 • Posillico Civil Inc. — $1,951,497 • Suffolk Asphalt Corporation — $2,491,874 • Pratt Brothers Inc. — $2,578,643 • A.L.A.C. Contracting Corporation — $3,000,000
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 35
SAVE TIME SAVE MONEY SAVE LABOR SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA
2007 Komatsu PC300LC-7EO Hydraulic Excavator
1998 Link-Belt RTC-8050 50 Ton Rough Terrain
Aux. Hyd, Q.C., 44” H.D. Bucket, DPF 4 Tier Compliant, Approx. 5000 Hrs ....................$117,500
110’ Full Pwr Boom, 56’ S.A., 2 Hoists, 3,971 Hrs .... ..........................................Reduced Price $129,500
2003 Caterpillar 330CL Hydraulic Excavator
2012 Caterpillar 321D LCR Hydraulic Excavator
Auxiliary Hydraulics, Quick Coupler. Approx. 7,500 Hrs ......................................................$87,500
9'6" Stick, Aux. Hydraulics, Coupler, A.C./Heat. 1,875 Hrs. ..................................................$172,500
2006 Caterpillar 330DL Hydraulic Excavator
2002 Caterpillar CB-634D Compactor
Aux. Hydraulics, 10' 6" Stick, Q.C., A.C. 4,550 Hrs .. ....................................................................$147,500
ROPS, Double Drum, 3,233 Hrs ................................ ............................................Reduced Price $38,500
INTRODUCING FlangeLock Tool Boxes TM
4 Tool Boxes Available All Include Slugs and O'Rings.
TO VIEW OUR ENTIRE INVENTORY For more information contact Mike Pearl at 914.980.8890 or email mike@flangelock.com
www.flangelock.com
VISIT www.equipmentmartofny.com
203/335-0100
EQUIPMENT WANTED Fax: 203/335-7996
Answering Machine 24 Hours E-mail us at equipmart@aol.com
Page 36 â&#x20AC;˘ August 12, 2015 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE
M E R L O - 5 I F 4 L J E 4 U F F S P G ) F B W Z & R V J Q N F O U ROTO Lift capacity up to 13,200 lbs Lift height up to 96 ft
PANORAMIC Lift heights 19 ft - 58 ft Max capacity 7,000 lbs - 8,800 lbs Class-leading telehandlers Ring of Steel Protection PANORAMIC HEAVY Lift capacity 9,900 lbs - 26,500 lbs Lift height 58 ft
Rental Units Available
PANORAMIC COMPACT Only 6.5 ft wide - â&#x20AC;&#x2DC;Lâ&#x20AC;&#x2122; version 6.5 ft high New UltraCompact 5.9 ft high Capacity up to 7,000 lbs 19 ft - 26.9 ft lift height
Merlo is a 48 year old global manufacturer of telescopic forklifts offering a wide range of telehandlers unsurpassed through their innovative design and quality. Merlo dominates the industry when comparing rotating telehandlers from the competition with superior design characteristics that improve durability and operation. All Hydrostatic full time 4WD ensures precise and consistent operation. Safety is paramount with instant braking, hydro-pneumatic suspension and legendary Merlo all-round visibility.
.VMUJQMF BUUBDINFOUT 0OF NBDIJOF +JCT BFSJBM QMBUGPSNT CVDLFUT FUD )ZESPTUBUJD ESJWF GPS TJNQMJDJUZ #VJMU JO TJEFTIJGU GPS QSFDJTJPO
GSE&E is the only Official Dealer authorized to sell Merlo Equipment in all / regions of the following states: NJ, NY, CT and PA and we offer the largest rental fleet of Merlo Roto Telehandlers in the USA.
$PNQBDU TUBCJMJ[FST GPS TBGFUZ 'SBNF MFWFMJOH GPS BDDVSBDZ
Call now and let us show you how Merlo is the best Telehandler available!
3JOH PG TUFFM GPS QSPUFDUJPO
(800) 479-3857
BRANDYWINE TRUCKS AND EQUIPMENT (2) Available
WE BUY EQUIIPMENT!
(301) 372-0083 t lbs - 26,500 lbs Shipping & Containerization Available
WE BUY TRUCKS!
WWW.BRANDYWINE-EQP.COM (2) 2011 Cat 336DL, Both under 4,500 Hrs, Aux Hyd, Hyd Q/C, SBGâ&#x20AC;&#x2C6;Pads, Straight Travel, 12â&#x20AC;&#x2122;10â&#x20AC;? &â&#x20AC;&#x2C6;10â&#x20AC;&#x2122;8â&#x20AC;?â&#x20AC;&#x2C6;Stick, Work Ready! ....................$195,000 Ea.
2014 Unused Bomag BW213D-4, EROPS, 84â&#x20AC;?â&#x20AC;&#x2C6;Drum, High/Low Frequency, 23.1x26 Rubber................$109,500 Ea.
2006 Cat 345C LME, 14,058 Hrs, 72â&#x20AC;? Bkt, Counterweight Removal Device, 152I ........................................$105,000 2005 Cat 963C, 7300 Hrs, EROPS, Cold A/C, Very Clean!, Stk #208l........$82,500
2003 CAT D4G XL, 5,563 Hrs, EROPS, Great CAT U/C, Stk #50I ..........$45,900
2012 Volvo EC250D LR, 4624 Hrs, 60â&#x20AC;&#x2122; Reach, 60â&#x20AC;? Bkt, A/C &â&#x20AC;&#x2C6;Heat, Tier 4, Stock# 719H ..........................$165,000 Low Hours
Low Hours
(2) Available
2001 Volvo A40Dâ&#x20AC;&#x2C6;End Dumps, 19k-22k Hrs, Good Rubber, Tailgates, Engine Retarders............................$64,500 Ea.
Low Hours 2011 Cat 304D CR, 970 Hours, EROPS, Aux Hyd, Hyd Tilt Blade, Stk #409H...... ................................................ $46,500 Many Lowboys in Stock! NEW/UNUSED
2005 Cat CP-563E, 84â&#x20AC;? Padfoot, Dozer Blade, OROPS, 1,000 Hrs, 1-Owner! Stock# 976H ............................$79,500
2013 Volvo ECR 235DL, Under 2000 Hrs, Aux Hyd, Mech. Thumb, Zero Tailswing, CLEAN! Stock# 123l ....$Call
2012 Cat 312EL, 1007 Hrs, Mechanical Thumb, Tier 4, Stock# 749H ....$124,500
New Witzco Lowboys, Customization Available, 35-50 Ton in Stock ........$Call
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 37
ShorQuip Supp Supply, ly, Inc.
TTrench rench Shielding & Shoring
Call Us For All Y Your our TTrench ren Shoring Needs | We rench We Carr Carryy 1” Steel Road Plate
Manufactured by
Efficiency iency Pr Production, roduction, oduction, Inc. Inc
Manhole Box
1302 Conshohocken Rd PA 19428 Conshohocken, PA
Slide Rail
Slide Rail System
Aluminum Build-A-Box
Manufactured by
Safe-T-Shore Safe-T T-Shorre
Aluminum Hydraulic Shoring
610 610.239.6234 . 239 .6234 www.shorquipsupply www.shorquipsupplyinc.com inc.com
Trench Box Steel Trench
fax: 610.239.6237 sales@shorquipsupplyinc.com
Page 38 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
JCB Brings Master Technician Program to North America
We are a full service authorized Eager Beaver Dealer.
YOUR FULL SERVICE VIBROTECH SCREEN DEALER FOR NJ & DEL.
DELIVERY
2008 John Deere 310J, Turbo, 4x4, ExtHoe, Powershift, 3rd Valve, Quick Coupler, Pilot Controls, 3,395 hrs, Stk # LP190.............. ................$48,500
IR SD100, Cummins 3.9B Eng, 23.1-26 Rear Tires, 84” Drum, Stk# DR015 .............. ................$28,900
2011 Case 580SN, A/C, 4x4, 4 Stick Controls, Ext Hoe, 12” Back Bkt, GP Frt Bkt, Suttle, Aux Hyd Outlets, 3996 Hrs, Stk# LB183 .............. ................$61,900
Case 621BXT Wheel Loader, A/C, Quick Coupler, 4x4, Foam Filled Tires, 3rd Valve Hyd Coupler, Rebuilt Engine, Stk# WL085 ................$41,900
2006 Kobelco SK210LC, Heat, A/C, Frt Aux Hyd, Hyd Thumb, Frt Digging Bkt, 5409 Hrs, Stk# EX084 ...... ................$72,500
2013 Cat CB24, 1.5 Eng, 33 HP, Hyd Drive, 47” Smooth Vib Drum, Water Syst, Stk# AR012 .... ................$38,900
Various New Excavators, Grapples and Thumbs
FINANCING
MIKE ZYNDORF LLC 609-625-8660 609-442-5514 (EVENINGS) FAX 609-625-8664 6481 Harding Hwy (Rt 40) Mays Landing, NJ 08330 Please Visit us www.mzequipment.com for our complete inventory
The master technician program is designed to continue to build the skills of JCB service technicians and recognize technicians that are at the top of their class. To be considered for the program, service personnel must be nominated by their dealership and pass an entry exam.
JCB recently introduced the “master technician” program to all dealerships in the North American network. The master technician program is designed to continue to build the skills of JCB service technicians and recognize technicians that are at the top of their class. To be considered for the program, service personnel must be nominated by their dealership and pass an entry exam. Once those qualifications have been met, participants must pass a series of training programs and hands on skill challenges at 100 percent, as well as all distance learning classes, JCB systems efficiency testing, core product component testing and other service based tests to earn the designation of master technician. Rick Papalia, senior vice president of corporate operations of Northland JCB said, “We feel it is very important for any technician to understand all training opportunities that are available, and how they can continue to learn and grow with the company and advance their career. Not only does it provide an opportunity to expand their understanding of the product, but it helps them to keep up with rapidly changing technology, some of which can be quite advanced. The master tech program training structure will also result in the highest levels of service
people possible. Most importantly, it will give our service technicians a means to recognize their accomplishments.” All those who successfully complete the master technician program earn the special master technician designation. They then compete annually in a competition where the best performing master technician in each of JCB’s 12 regions earns a special “master technician ring” to acknowledge their expertise. “Service technicians are often the unsung heroes of a dealership, yet they are vital to its success and support of the JCB brand, that’s why we are proud to introduce this prestigious program to honor those technicians who represent the best of the best in our North American dealer network," said Chris Giorgianni, JCB vice president of product support and government & defense. The 12 regional master technician competition winners will compete annually in a national master technician contest where the champion will win an all-expense paid trip to JCB’s global headquarters in the United Kingdom. For more information, visit www.jcbna.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 39
YOUR MACHINE IS TEED OFF
Not using Cat® filters can mess with your game. This guy didn’ didn’tt use a Cat filter in his Cat machine and now he’ he’ss paying the price. What’s What’s worse? He could pay an even bigger price down the road because Cat filterss protect like no other other,r,, which is why you should always use them. And if you don’ don’t? t? Well, Well, let’s let’s just say you might regret it. Find out why at ChooseCatFilters.com. Buy ONE CAT CA ATT FILTER FILLTER TER and a GET ONE FREE | Get FREE Cat Gloves | Enter to win FREE Cat Filters & Fluids for a year* Helping Cat machines lead long and productive lives – that’ that’ss what we’re built to deliver deliver.. *VOID WHERE PROHIBITED. NO PURCHASE NECESSARY TO ENTER OR WIN. A PURCHASE WILL NOT INCREASE YOUR CHANCES OF WINNING. Please see complete official promotion rules at ChooseCatFilters.com. © 2015 Caterpillar Caterpillar.. All Rights Reserved. CAT, CAT, CATERPILLAR, CA ATERPILLAR, TE ERPILLAR, BUILT BUILLTT FOR IT IT, T,, their respective logos, “Caterpillar Y ellow,” the “Power Edge” trade dress as well as corporate and product identity Yellow,” used herein, are trademarks of Caterpillar and may not be used without permission.
Page 40 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Norris Sales Company Nearly Doubles Footprint Size from page 1
N
Participating in the ceremonial ribbon cutting for the new Norris Sales facility in Plymouth Meeting (L-R) are Lenore Bruno, vice chair, Plymouth Township Council; Martin Higgins, Plymouth Township Council; Karen Weiss, Plymouth Township manager; Dean Eisenberger, Plymouth Council; Sheldon Simpson, chairman, Plymouth Council; Rachel Zajick of Norris Sales; Bruce Castor, Montgomery County Commissioner; Pa. State Rep. Mike Vereb; Karen and Don Zajick of Norris Sales; Bob Martino, Ram Construction; and Kathy Brandon, Montgomery County Chamber of Commerce.
orris Sales’ new facility in Plymouth Meeting, Pa., is 55,000 sq. ft. on approximately 6 acres. To get a sense of just how big it is, an NFL football field (end zones included), is approximately 57,000 sq. ft. on just over 1 acre of land. The new site is almost double the size of the company’s previous location. In addition to consolidating five buildings into one, some highlights include a showroom that can hold three times the amount of products and nine service bays that house two 5-ton (4.5 t) overhead bridge cranes and 2-ton (1.8 t) jibs. The employees are really proud and delighted to be here every day, according to Karen Zajick, Norris Sales president and treasurer. “The new facility also makes it easier for our customers,” she said. “Now they can come to one location where parts and service are conveniently co-located. They no longer have to drive from one building to another to get the products they need.” “We really hope that this building elevates our service and provides every customer with a best-in-class customer experience,” she added. “Our goal is to be able to
Bruce Castor (L), Montgomery County commissioner, and Pa. State Rep. Mike Vereb (C) congratulate Don Zajick, chief financial officer of Norris Sales on the company’s expansive new facility in Plymouth Meeting, Pa.
Gehl skid steers and a host of other equipment from many different manufacturers can be purchased or leased at Norris Sales.
Norris Sales’ new facility features a seminar room on the second floor.
Sean Heron (C), sales representative, and John Long (R), assistant rental manager, both of Norris Sales, work the rental counter in the new, spacious showroom.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 41
With Spacious New Facility in Plymouth Meeting, Pa. fulfill all customer requests and now with 17,500 sq. ft. warehouse we can easily stock a wide offering of products. That’s something we have always strived to do and now we are proud that we have the facility that can accomplish it.” Norris Sales has three road service trucks, plus a few smaller service vehicles, that will work out of the new facility. The new Plymouth Meeting location has 17 full-time service staff, while the company’s other location in Sicklerville, N.J., has 11. Years in the Planning The company began its search for a new location five years ago, necessitated by the onset of the Lafayette Street corridor project.
“The project was taking a tremendous amount of frontage from our space — ten feet off the front, forty feet off the side, bringing in a five-lane road up Diamond Ave.,” Zajick said. “We just couldn’t operate efficiently in the space any longer given all the changes.” The new facility was built from the ground up, in just over a year. The contractor was Ram Construction. “It was a flat piece of land and we knew it would work well for our operation. We were able to buy another 1.6 acres from an adjacent lot in the rear which enabled us to have enough room for all of our equipment on site,” Zajick said. Norris Sales is in the process of planning a celebratory open house event at its new facility in the coming months. For more information, visit A neat, brightly lit and organized showroom greets customers as they enter Norris Sales. http://www.norrissales.com/.
Norris Sales’ 17,500-sq.-ft. parts warehouse is stocked with a vast supply of parts.
Norris Sales’ new facility sits on 6 acres of land in Plymouth Meeting, Pa.
Norris Sales customers can choose from a wide variety of rental equipment at the company’s new facility in Plymouth Meeting, Pa.
The new facility houses nine service bays that house two 5-ton (4.5 t) overhead bridge cranes and 2-ton (1.8 t) jibs.
Page 42 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Hydraulic Attachments for Cutting or Grinding and Digging. Applications: • • • • • •
Demolition, Refurbishment Trenching Tunneling Underwater Works Pile Head Cutting Permafrost, Frozen Stockpiles
Products: • • • •
USED TRUCK & EQUIPMENT SALES
Transverse Drum Cutters Revolving Drum Cutters Longitudinal Drum Cutters Cold Milling Machines Asphalt Removal
Cutting Concrete Slabs
1361 Conshohocken Rd., Plymouth Meeting, PA 19462
(610) 277-0100
Digging Trenches
Tunnel Excavation
2012 Ford F150, Crew Cab, 4x4, Loaded, 91,155 miles $27,500
2011 Chev 1500, 4x4, 74,600 Miles $16,900
2009 Ford F350, 6.4 Diesel, 4x4, 77,380 Miles $22,500
2009 Case 580M, Series 3, 4x4-Ext., 2920 Hrs $45,900
1 (480) 983-2235 www.drumcutters.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 43
2011 CAT 304D CR, #130-15052, 1894 Hrs, Cab, Air, Swing Boom, 5’3” Stick, Manual QC, Aux Hyd, Hyd Thumb, 24” Bkt ............$42,500
2005 CAT CS-433E, #165-05016, 3144 Hrs, OROPS, Hydrostatic, 66” Vibratory, Drum Drive, 14.9x24 Tires .... ........................$52,500
LET US REDUCE YOUR WIRELESS EXPENSES.
2006 CAT 257B, #170-1303, 3104 Hrs, Cab, Air, Hyd QC, High Flow XPS Aux Hyd, 15” Rubber Tracks, GP Bucket ............$24,500
Farmington (Rochester), New York Fax: 585-924-7624 Email: jfinlon@americanequipmentllc.com
585-466-4902 www.americanequipmentllc.com
Deacon Equipment Co. CALL: 888-233-2266 Located In: Bloomsburg, PA
WIRELESS COST ANALYSIS LET US HELP YOU MANAGE WIRELESS TELECOM EXPENSES.
WIRELESS CONTRACT NEGOTIATIONS USE THE SAME CARRIERS, GET A 20-45% BETTER PRICE.
MANAGED WIRELESS SERVICES CONTINUOUSLY IDENTIFY AND IMPLEMENT SAVINGS.
Leverage OpDecision’s extensive cellular industry experience and inside knowledge to receive double-digit savings. NEW MORBARK 3800XL Track Wood Hog P.O.R.
Case Study Construction Equipment Distributor - 30.3% Savings Monthly Spend Before - $4,632 Monthly Spend After - $3,229 Total Monthly/Annual Savings - $1,403/$16,836 NEW MORBARK M20R ON TRACKS P.O.R. Exclusive Morbark Dealer
Visit: www.deaconequipment.com
Drew Polin
856-535-5427 www.OpDecision.com
Page 44 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
JLG Names New Exclusive Skytrack National Trench Dealer of Central, Northern Pa. Safety Opens New Key Equipment is a growing regional provider of lifting and material handling equipment and has recently been named JLG exclusive Skytrack dealer of 20 counties in central and northern Pennsylvania. With sales and rental locations in Middletown, Williamsport, Allentown and Honeybrook, Key is positioned to service contractors and industry in Pennsylvania, New Jersey, Delaware and Maryland. Skytrack telehandlers are a flagship brand of JLG based out of McConnelsburg, Pa., and offer users a premium package of performance and reliability at an affordable price, according to the company. (L-R): Steve Brown, vice president of sales of Key Equipment; Brian Funk, “The Skytrack telehandler is the president of Key Equipment; Rick Walker, district manager of JLG; and Craig lowest cost of ownership machines, Smith, Key Equipment sales manager. based on initial purchase price and operating costs, that JLG builds” said Rick Walker, district manager of JLG. “This is a testa- units with reaches up to 54 ft. (16.4 m). These machines are available for purchase with attractive factory financing and ment to Skytrack durability and reliability.” As a bonus, Walker mentioned that Skytrack, JLG, and extended warranties. Craig Smith, sales manager at Key said, late model Gradall’s have a common car“These Skytracks really have it all — great riage mounting system so buckets and ground clearance, high drive line torque, attachments are interchangeable — saving great visibility and stability and very palatfleet owners time and money. able price. I’ve ordered these units in with “I’ve always admired the Skytrack line” foam filled Dura-Force tires, enclosed said Brian Funk, president of Key. “These cabs, pallet and block forks and best of all machines are super tough and reliable. You we have a number of the last pre-Tier IV still see 30 year old Skytracks out on the job doing their job. We are really pleased to be Key Equipment is a grow- final machines in stock; saving our cuspartnered with JLG and Skytrack and look ing regional provider of tomers thousands of dollars. We’re excited forward to using our teams’ knowledge and lifting and material han- to go head to head with any brand in the experience in the telehandler market to dling equipment and has market and prove what these Skytracks assist our customers with rental and pur- recently been named JLG can do.” (This story also can be found on chase needs.” exclusive Skytrack dealer Construction Equipment Guide’s Web site at of 20 counties in central To kick off the new dealership Key has brought in a large stock of new 8 and 10K and northern Pennsylvania. www.constructionequipmentguide.com.) Two SkyTrak 10054 telehandlers stand ready to be used in the lot of Key Equipment’s Harrisburg location.
Location in D.C. National Trench Safety, LLC (NTS), a Houston-based company specializing in the rental and sales of trench and traffic safety equipment, trench and traffic safety engineering, and OSHA-compliant training classes, announced the opening of a new branch operation in Washington D.C. “Our new Washington D.C. area branch is a significant move for NTS, which will allow us to continue to strengthen our coverage and service footprint along the East Coast,” said Ron Chilton, president of NTS. “The Washington D.C. metropolitan area is one of the largest in the nation and is home to one of the most robust, construction markets in the United States. The area has an extensive amount of capital improvement projects planned over the next few years, which represent significant opportunities for NTS.” The Washington D.C. operation, which will be located in northern Virginia, will be a full service trench and traffic safety location. Pat Hewitt, a long-time construction equipment rental and trench safety veteran will be spearheading the sales growth for the location. “We’re very fortunate to have someone of Pat’s caliber and experience to establish NTS’ presence in this market,” said Chilton. “Pat has a very strong business relationship with many of the key contractors in the market, which will be a big plus for this new branch.” Connie Hewitt also has joined NTS as the branch manager of this new operation. Hewitt has already begun building a strong operational team of experienced professionals to support growth in the market. “Connie has a strong operational background that will be important as she begins to not only establish the branch in the market, but develop her team. She also understands the market along with the demands of the position and she is focused on the operational challenges to ensure our customers get the equipment they need, when they need it, on time, every time,” said Chilton. The Washington D.C. branch is the 25th branch location for National Trench Safety in the United States. NTS now has operations in Alabama, Arizona, California, Florida, Illinois, Louisiana, Nevada, North Carolina, South Carolina, Texas, Virginia and Utah. In maintaining its objective of building a nationwide network of trench and traffic safety branches, NTS plans to open at least one additional branch location in 2015 to continue the company’s expansion of its national footprint. For strategic reasons, Chilton declined to comment on the location of the additional new branches. For more information, visit www.ntsafety.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Like on
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 45
Visit www.weaco.com to view our complete inventory 4009 Conrad Weiser Parkway • Womelsdorf, PA 19567 Phone: (610) 589-5555 • Fax: (610) 589-5350 • Email: sales@weaco.com
2003 New Holland LS180, 2478 Hrs, Cab, Heat, No Door, Weight Kit, 78” Bucket................................................$14,500
2006 Ingersoll Rand SD100D, 4267 Hrs, Cab, Heat, A/C, 84” Drum, Nice Machine ............................................$47,500
YOUR NEW PARTNER IN SUSTAINABLE PRODUCTIVITY www.atlascopco.us
2008 Bobcat T250, 2108 Hrs, 78” Bucket w/Toothbar, Good Tracks, 81 HP Kubota Diesel........................................$19,500
2004 Bobcat T190, 3143 Hrs, Power Bobtach, 72” Bucket, Good Tracks, 66 HP Kubota Diesel ..............................$16,000 Stewart & Stevenson is proud to stock Atlas Copco tools as well as iT4 and T4F compressors and generators at its New Jersey location.
Lodi, NJ 33 Gregg St. (800) 823-2332
2012 Bobcat T770, 310 Hrs, Cab, Heat, A/C, Keyless Start, Bobtach, 92 HP Kubota Diesel, 78” Bucket ..................$47,000
2008 Bobcat 325G, 2015 Hrs, Cab, Heat, Plumbed, Quick Coupler, 18” Bucket, Kubota Diesel ............................$21,000
Rent or finance one today!
www.stewartandstevenson.com
Page 46 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
DAVE HALLMAN CHEVROLET 866-686-0545 Call Bob Dylewski SEE EVEN MORE GREAT DEALS @ www.workreadytrucks.com Arriving Daily The All New 2015 Silverado HD’s 2015 Chevrolet SILVERADO 3500HD 9' AIR FLO Steel DUMP 4X4 Duramax Diesel, AIR FLO 9' Dump, electric over hydraulic hoist, 1/4 cab shield, C4095 $51,748
2015 Isuzu NPR 250 Miles, White, HD EFI 11' Aluminum Drop Side Mason Dump Body, I7482 $49,998
2015 Chevrolet SILVERADO 3500HD 9' AIR FLO Steel DUMP 4X4 Duramax Diesel, AIR FLO 9' Dump, C4102 $52,748
2015 Chevrolet SILVERADO 3500HD CREW CAB, 9' MORGAN DUMP Body 6.6 Liter Duramax & Allison Transmission, C3956 $54,998
2015 Chevrolet SILVERADO 3500HD 9' AIR FLO Steel DUMP 4X4 Duramax Diesel, AIR FLO 9' Dump, C4044 $51,748
2015 Chevrolet SILVERADO 3500HD CREW CAB, 9' AIR FLO STEEL DUMP $45,648
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 47
Rockblaster Hammers Brentwood, NY
(800) 999-6044 or (631) 273-1893 Fax: (631) 273-2418
ironhorseequip@msn.com
Equipment • Hammers • Parts Attachments • 24/7 On Job Service Specializing in all your hydraulic hammer needs worldwide
www.ironhorseequip.com
2007 CAT 345CL, 11,500 Hrs, 12’6” Stick, 48” Bkt
2003 INGERSOLL RAND 350 psi, 1070CFM, Cat CC15, 7000 Hrs..............................P.O.R.
Air Compressors 2000 ATLAS COPCO XAS1100, Stk# H1010..................................................P.O.R. 2003 IR 1070 HP COMPRESSOR 350 psi ....................................................P.O.R. 2008 INGERSOLL RAND 935 CFM, Stk# H1012 ..........................................P.O.R. 1993 SULLIAR 900Q, 900x150psi, Stk# H1025 ............................................P.O.R. 2007 SULLAIR 750H, Stk# H1008, Stk# 1008 ..............................................P.O.R. Asphalt / Pavers 1986 BLAW-KNOX PF500 ASPHALT SPREADER, Stk# S1878-27 ................$6,800 Heavy Duty Trucks - Bucket Trucks / Boom Trucks 1998 FREIGHTLINER FL70 SERVICE TRUCK, Stk# H1024 ..........................P.O.R. 1980 MACK SUPERLINER RWL712 LST, Stk# H1027 ..................................P.O.R. Forklifts - Mast CATERPILLAR V80E ......................................................................................P.O.R. Excavator - Mini 2008 YANMAR VIO35-5B, Stk# S2228-2 ......................................................P.O.R.
1987 CAT D7H, s/n 5BF00443, EROPS, 12’ Blade w/Hydraulic Tilt, Differential Steer, Engine 3306 Cat, 24” Pads, New Cutting Edges, 65% U/C, Meter Show 02727 Hrs, Runs & Works Excellent ..........CALL
Excavators 1996 CASE 9020B, w/Used Hyd, Hammer RB1000g, Stk# H1026 ................P.O.R. 2005 CAT 314C LCR, Stk# S2273-1 ..............................................................P.O.R. 2002 CAT 320CL, Stk# S2252 ......................................................................P.O.R. 2007 CAT 345CL, Stk# H1002 ......................................................................P.O.R. 2007 KOMATSU PC138USLC-8, Stk# S2273-2 ............................................P.O.R. Dozer 1987 CAT D7H, S/N 5BF00443..........................................................................POR Compactors - Smooth Drum 1988 DYNAPAC CA25-E, CAT DIESEL, Stk# H1005 ....................................$31,500 Loader Backhoe 1998 CAT 446B, Stk# S2212 ........................................................................P.O.R. 2006 CAT 446D, Stk# S2217-2......................................................................P.O.R. 1990 DYNAHOE 490 ......................................................................................P.O.R. 1987 DYNAHOE 490, Stk# S1960-1 ..........................................................$10,000 1999 CAT 446B, w/Extendahoe, Stk# S2253-2..............................................P.O.R.
2005 CAT 314C LCR HYDRAULIC EXCAVATOR, Equipped w/AC & Heat, 9’10” Long Stick, 24” Bkt, 20” Steel Track Cover w/Rubber w/20% Wear Remaining, 0-Swing, Good U/C w/60% Wear Remaining, 4806 Hrs,
Other Equipment BIRD 10T MINE UTILITY CARRIER, Stk# 1017 ............................................P.O.R. Wheel Excavators 2004 CAT M322C, Stk# S2140 ......................................................................P.O.R. 1995 CAT 214BFT, with a Hammer, Stk# H1018 ..........................................P.O.R. Forklifts - Telescopic INGERSOLL RAND VR90B, Stk# H1016 ........................................................P.O.R. Drills - Vertical INGERSOLL RAND ECM350, Stk# H1013 ....................................................P.O.R. 1992 INGERSOLL RAND ECM350, Stk# H1007 ............................................P.O.R. INGERSOLL RAND ECM490, Stk# 1014 ........................................................P.O.R. 1992 INGERSOLL RAND ECM370, Stk# H1007 ............................................P.O.R. INGERSOLL RAND ECM490, Stk# H1009 ....................................................P.O.R. INGERSOLL RAND ECM490, Stk# H1020 ....................................................P.O.R.
Page 48 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Cleveland Brothers Opens New Scranton/Wilkes-Barre from page 1
A
pproximately 90 Cleveland Brothers’ employees in the Wilkes-Barre/Scranton area get to go to work every day in a significantly larger brand new facility. And on July 30, the company held a grand opening to celebrate milestone. The facility features a 60,000-sq.-ft. main building, 20 service bays, 10 service bays for construction equipment and compact construction equipment, six over-the-road truck bays and four oil and gas petroleum bays. There is a 20-ton crane in the petroleum bays, a 5 ton crane in the truck bays and two 10 ton and two 7 and half ton in the construction area. And both employees and customers have one word for it: Tom Schachner (L), vice president of sales, and Steve Amazing. Simko (R), account manager, both “Really, that is the word of the of Cleveland Brothers, welcome John Guimento of Guimento day,” said John Borys, parts and CE Hardscape, Dickson City, Pa., to the service manager. “They can’t get over open house. how state-of-the-art it is, especially with contamination control. We built this as a model contamination control for the rest of the company. We took all of Caterpillar standards and we met or exceeded them so we could be a five-star facility. “One of the things that we have that nobody else has is with the provisions we put into work on CNG [compressed natural gas]. We have sensors in that side of the shop in the ceiling and the floor that can sense a gas leak. If it does that, we have a fire door that closes, that cuts that leg off from the rest of the building. The exterior doors open and then the exhaust fans emergency evac all the air and system.” Brothers President and The land for the new facility was Cleveland CEO Jay Cleveland Jr. welcomes purchased in the early 2000s but was guests to the new facility open put on the back burner for several house prior to NASCAR driver Ryan years. The company broke ground on Newman “cutting” the ribbon. John Borys (L), parts and CE service manager, Cleveland Brothers, and Mike Schirling of Robert E. Lamb Inc. are both proud and excited about the new Wilkes Barre/Scranton facility.
The new facility is spacious. It features 20 service bays, 10 service bays for construction equipment and compact construction equipment, six over-the-road truck bays and four oil and gas petroleum bays. There is a 20-ton crane in the petroleum bays, a 5 ton crane in the truck bays and two 10 ton and two 7 and half ton in the construction area.
A towering sign lets motorists on Route 81 know who’s not far from them as they pass by.
Jay Cleveland Sr. (C) speaks with Bob Schmidt (L) and Andrew Stewart, both of Schmidt Construction of Greeley, Pa.
July 24, 2014, and moved in July 20, 2015. Robert E. Lamb Inc. was the contractor. “We do planning, design and construction,” said Mike Schirling of Robert E. Lamb Inc. “I’m in the planning group, so I work with Cleveland Brothers in terms of understanding their requirements and then working out the needs for this facility. So I planned and designed it and then we actually executed the construction for the facility as well, so we did the full job here. It looks great and it sounds like they are really pleased with it. It’s nice to see what you work on from the beginning come to fruition.” The new facility also has an 8,700sq.-ft. wash building. “It’s got a knock down bay for any The parts warehouse is 10,000 sq. ft., with 28 ft. ceilings. of the track equipment that would
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 49
Facility in Style With Help From NASCAR’s Ryan Newman
Ryan Newman crosses the finish line, effectively cutting the ribbon of Cleveland Brothers’s new facility.
With the assistance of Terry Baumgarten (L) of Cat Racing, Ryan Newman fields questions from guests.
A great moment for NASCAR fans, young and older, was when Ryan Newman was available for photos and autographs.
NASCAR’s Ryan Newman answers guests’ questions.
Guests and employees, some with their cameras ready, await NASCAR’s Ryan Newman’s arrival to officially “cut” the ribbon for the new facility.
come in with heavy dirt on it,” said Borys. “That knocks ing the construction, electric power, industrial engines, oil Under One Roof down, it goes through a sediment pond and from there goes The new facility replaces the former Wilkes-Barre and and gas, and on-highway truck businesses. to an oil and water separator and then it goes into the steam Pittston branches, merging them under one roof. It provides “The new Wilkes-Barre/Scranton branch stands for bay and then comes over a concrete apron into the shop, so a quick and convenient one-stop shopping experience, hous- Cleveland Brothers’ ongoing commitment to our customers it’s spotless when it comes into the shop, once and their businesses in northeast Pennsylvania,” again meeting contamination control guidelines. said President and CEO Jay Cleveland Jr. “We “We have another standalone wash bay, steam are dedicated to helping make their business sucbay, that is for our over the road trucks and petrocessful by providing world-class equipment and leum industry,” Borys added. “Whether they are unparalleled service at this state-of-the-art working on emergency power generators or frack branch.” trucks, they use that other steam bay. They are There are approximately 90 total employees in enclosed, heated, all of the latest and greatest filthe building, 50 or 60 of whom are technicians. tration. Every drop for the air in the entire facility The parts warehouse is 10,000 sq. ft., with 28 has a filter on it. Our oil gets filtered coming in, it ft. ceilings, so Cleveland Brothers went high with gets filtered going out. It gets filtered coming into all of its racking. All of the pallet racking is 20 ft. the bulk tank, it gets filtered coming out of the high; the shelving is 16 ft. high. bulk tank, at the tank and then once again gets filThere are 12 service trucks on the construction tered at discharge. Caterpillar and Cleveland side, and approximately a dozen that work on gas Brothers are really committed to contamination and oil. control. I think we are above and beyond our Two wash bays and a welding bay are just one part of Cleveland Brothers’s The new branch also has the capability to run competitors by far.” expansive new facility. see CLEVELAND page 127
Page 50 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Four locations serve Maryland, Delaware, Washington, D.C. and parts of Virginia, New Jersey, and Pennsylvania Elliott & Frantz can show you the latest Gradall models, including Series IV excavators with highway speed travel capability. Featuring AutoDrive™, these models integrate a 6-speed automatic transmission and a new transfer case for efficient, simplified travel as well as convenient jobsite repositioning from the upper cab. Gradall excavators also feature the job-proven telescoping, tilting boom that enables you to do more different jobs with just one machine – even under bridges and trees.
WWW.ELLIOTTFRANTZ.COM
Delmar, DE 302-846-3033 Jessup, MD 410-792-9134 King of Prussia, PA 610-279-5200 Manassas, VA 703-257-2381
GEORGE & SWEDE SALES & SERVICE INC. (585) 584-3425 Fax: (585) 584-8853 Pavilion, New York Your Wheel Loader Specialists
www.georgeandswede.com Email: sales@georgeandswede.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 51
Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.
Caterpillar 511OB Excavator, 1:50 Scale - $115
Caterpillar 5080 Shovel, 1:50 Scale - $70
Bucyrus Erie 22B Cable Backhoe, 1:50 Scale - $250
John Deere 850K Dozer, 1:50 Scale - $65
Allis Chalmers Forty-Five Motor Grader, 1:50 Scale..................$115
Caterpillar D10 Track-Type Tractor (Conrad), 1:50 Scale ..........$185
John Deere 420 Dozer, 1:16 Scale ..................................................$60
Allis Chalmers HD-21 Dozer, 1:50 Scale ......................................$120
Caterpillar D11R Track-Type Tractor, 1:50 Scale ........................$100
John Deere 470G LC Excavator, 1:50 Scale ..................................$85
Allis Chalmers TS-300 Motor Scraper, 1:50 Scale......................$115
Caterpillar D250E Articulated Truck (NZG), 1:50 Scale ............$125
John Deere 624J Military Wheel Loader, 1:50 Scale....................$40
Barber Greene 260C Wheeled Paver, 1:50 Scale........................$200
Caterpillar 302.5 Mini-Excavator, 1:32 Scale..................................$60
John Deere MC Crawler Dozer, 1:16 Scale..................................$100
Bobcat E55 Compact Excavator, 1:25 Scale ................................$60
Caterpillar MH3049 Material Handler w/magnet, 1:50 Scale ....$150
Komatsu CK25 Compact Track Loader, 1:50 Scale ....................$45
Bobcat S570 Skid Steer Loader, 1:25 Scale ..................................$65
Caterpillar 428B Backhoe/Loader(NZG), 1:50 Scale ....................$75
Komatsu D51 EX Dozer, 1:50 Scale ................................................$85
Bobcat T550 Track Loader, 1:25 Scale............................................$70
Caterpillar 428C Backhoe/Loader (NZG), 1:50 Scale ..................$75
Komatsu D51PXi-22 Dozer, 1:50 Scale ..........................................$90
Bobcat 225 Compact Excavator, 1:25 Scale..................................$50
Caterpillar 438C Backhoe/Loader (NZG), 1:50 Scale ................$135
Komatsu D65 EX-17 Dozer w/Ripper, 1:50 Scale..........................$80
Case 1102 Vibromax Roller, 1:35 Scale ..........................................$75
Caterpillar PR-450 Pavement Profiler (NZG), 1:50 Scale ..........$135
Case CX210C Excavator, 1:50 Scale ..............................................$50
Caterpillar 621K Motor Scraper, 1:50 Scale................................$165
Case CX250C Excavator, 1:50 Scale ............................................$185
Caterpillar 627K Motor Scarper, 1:50 Scale................................$165
Case 580 Super N WT Backhoe/Loader, 1:50 Scale ....................$60
Caterpillar 631E Motor Scraper, 1:50 Scale ..................................$60
Caterpillar 16G Motor Grader (NZG), 1:50 Scale ........................$145
Caterpillar 775G Off-Highway Truck, 1:50 Scale ........................$120
Caterpillar 140H Motor Grader, 1:50 Scale ....................................$75
Caterpillar 920 Wheel Loader (Conrad), 1:50 Scale ..................$120
Caterpillar 325L Excavator (NZG), 1:50 Scale ............................$165
Caterpillar 980G Military Wheel Loader, 1:50 Scale ....................$60
Caterpillar 340D L Excavator, 1:50 Scale ....................................$170
Caterpillar 988B Wheel Loader, 1:50 Scale....................................$60
Caterpillar 365B L Series II Excavator, 1:50 Scale ......................$115
Caterpillar 988F Wheel Loader (NZG), 1:50 Scale ......................$115
Caterpillar TH407C Telehandler, 1:32 Scale ................................$100
Dynapac SD2500 CS Road Paver, 1:50 Scale ............................$150
Caterpillar 428 Backhoe w/Hammer, 1:50 Scale ..........................$70
Grove TM1500 White 6 Axle Crane, 1:50 Scale ..........................$140
Caterpillar 740B Articulated Hauler, 1:50 Scale ..........................$115
Hamm 3414 Pad Foot Compactor, 1:50 Scale ..............................$90
Caterpillar 980K Wheel Loader, 1:50 Scale..................................$135
Hyundai 210LC-9 Excavator, 1:40 Scale ......................................$100
Terex 33-07 Off-Highway Truck (NZG), 1:40 Scale........................$90
Caterpillar 988K Wheel Loader, 1:50 Scale..................................$140
International 175 Crawler Loader, w/4in1 bucket, 1:50 Scale ......$60
Vogele 1900-2 Road Paver, 1:50 Scale ........................................$140
Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy Trailer,
International 175 Crawler w/Demo Bucket, 1:25 Scale..............$150
Vogele 2100-3 Road Paver, 1:50 Scale ........................................$145
1:50 Scale ..........................................................................................$110
International 350 PayHauler, 1:50 Scale ......................................$260
Volvo A40F Articulated Hauler, 1:50 Scale ..................................$120
Caterpillar D6K XL Track-Type Tractor, 1:50 Scale ......................$65
International 560 PayLoader, 1:50 Scale ......................................$140
Volvo L60G Wheel Loader, 1:50 Scale............................................$95
Caterpillar D6R Track-Type Tractor, 1:50 Scale ............................$90
International TD-14 Crawler Dozer, 1:16 Scale............................$140
Volvo L220G Wheel Loader, 1:50 Scale........................................$120
Caterpillar D7E Track-Type Tractor, 1:50 Scale ............................$85
JCB 467 WLS Front End Loader, 1:50 Scale ..............................$135
Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale ..........$120
Caterpillar D10N Track-Type Tractor, 1:50 Scale ..........................$50
John Deere 315SJ Backhoe/Loader, 1:50 Scale ..........................$40
Wirtgen SP15 Slipform Paver, 1:50 Scale ....................................$110
Komatsu D155AX Dozer w/ripper, 1:50 Scale ..............................$95 Komatsu D375A Dozer, 1:50 Scale................................................$125 Komatsu GD655 Motor Grader, 1:50 Scale....................................$90 Komatsu HM400-3 Articulated Truck, 1:50 Scale ......................$100 Komatsu PC200-8 Excavator, 1:50 Scale ....................................$135 Komatsu D475A Dozer, 1:50 Scale................................................$125 Komatsu WA500 Wheel Loader, 1:50 Scale ..................................$75 Komatsu WB146 Backhoe/Loader, 1:50 Scale..............................$75 Komatsu WH613 Telehandler, 1:50 Scale ......................................$65 Link Belt 250 X3 Excavator, 1:50 Scale ........................................$160 O&K RH9 Excavator, 1:50 Scale ......................................................$85
Shipping and Handling Included
CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034
Contact – Barry McKeon
800-523-2200
Ext. 197
• 610-506-5961 Cell
Email – bmckeon@cegltd.com
Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
Page 52 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
OPDYKE INC. (6)
MORE IN STOCK
$104,500
T r u c k s1 2 3 .C O M
SPECIALIZED TRUCK & EQUIPMENT SALES 8563
8695
$119,500
8664
$59,500
8657
$79,500
10 TON 17 TON
168,737 miles
89,703 miles
50,730 miles
2003 MACK RD686S; 6 CYL; MAXITORQUE 10 SP 03-10 KENNWORTH T 3 7 0 ; MULTISPEED/REVERSE TRANS; A/C; 78K GVW. 2002 FASSI F270A.23 KNUCKLEBOOM; 4500 GAL; 3 COMPTS; ALMAC TANK; 330HP; AUTO. 10 TON; RADIO REMOTES; 22’6’’ STEEL FLATBED.
2001 QMC DROP DECK TRAILER ; AIR RIDE SUSPENSION;QMC PRECAST CRANE ; 44,000 LB AT 10’ SIDE REACH; 4,840 LB AT 55’
2005 FORD F750; CAT C-7 6 CYL (210 HP); 6 SP; A/C; 33K GVW. MANITEX CRANE 1770; 17 TON; 120’ HOOK HT; 20’ WOOD FLATBED.
$84,500
$34,900
2003-2010 MODELS AVAILABLE
FUEL DELIVERY TRUCKS; $59,500
8665 $38,900 3.5 TON
8650
UNDER CDL
97,768 miles
2007
MACK
KNUCKLEBOOM; 140,023 miles
2006 PETERBILT 335; CAT C-7 6 CYL (250 HP); 6 SP; A/C; ALUM WHEELS; 33K GVW. IMT KNUCKLEBOOM; 3.5 TON; RADIO REMOTES; 14’ STEEL FLATBED.
UNMOUNTED KNUCKLEBOOMS
8637
$74,900
4 x4
FUEL TRUCKS IN STOCK! $49,500
8652
21 TON
10 1/2 TON; PICKS 2513 LB AT 50;6” MAX SIDE REACH;
269,108 miles
2006 I N T E R N AT I O N A L 4300; DT466 6 CYL (225 HP); ALLISON 5 SP AUTO; A/C; 25.5K GVW. LEDWELL WAT E R / S P R AY B O D Y; 2,000 GAL; STEEL TANK.
8602
G R A N I T E ; 370 HP; 10 SP; A/C; 62K GVW. 0 8 C O R M A C H
UNDER CDL
8467
80,189 miles 1998 FORD LT8500; CUMMINS 8.3L 6 CYL (275 HP); FULLER 9 SP (8+LO); 58K GVW. NATIONAL CRANE 800C; 21 TON; 133’ HOOK HEIGHT; 18’ WOOD FLATBED.
8591 16.5 TON
$79,500
825 hours 2011 DITCHWITCH FX30 VACUUM EXCAVATOR; KUBOTA 3 CYL DIESEL ENG; TUTHILL BLOWER; BELT DRIVE; WATER PUMP.
$99,500
8666
102,589 miles
107,230 miles
14 NEW starting at $16,900
2007 INTERNATIONAL 4300; DT466 6 CYL (210 HP); FULLER 6 SP; A/C; 25,500 GVW. 2008 AUTO CRANE AC3-19/2 KNUCKLEBOOM; 24’ WOOD FLATBED. $79,500
8669
2012 INTERNATIONAL WORKSTAR EXT 149,928 miles CAB 4X4; MAXFORCE 6 CYL (220 HP); 2000 INTERNATIONAL 2674; CUMMINS ALLISON 5 SP AUTO; A/C; 33K GVW. ISM 305 6 CYL (305 HP); ALLISON 5 SP AUTO;
CAB
&
$32,500
744 miles
20+ used starting at $4,900
2014 INTERNATIONAL 7600;
ISM; 440 HP; 11 SP; A/C; 86K GVW
CAB & CHASSIS 189” FROM CAB TO REAR; 281” WHEEL BASE.
3123 BETHLEHEM PIKE, HATFIELD, PA 19440
CHASSIS;
83’’ C /A ; 166’’ FRAME; 185’’ W /B. 8568
461,755 miles
2002 MACK RD688S; E7-350 6 CYL (350 HP); FULLER 8LL; A/C. 24’ STEEL FLATBED; W/ PIGGYBACK S E T U P.
(8 6 6 )
239-0451
A/C; 66K GVW. PALFINGER PK48000GV2 KNUCKLEBOOM; 16.5 TON; RADIO REM CTRLS; 20’ STEEL FLATBED.
$19,500
UNDER CDL
8431
5,750 hours
1998 INTERNATIONAL 4700; DT466E 6 CYL (190 HP); 6 SP; 25,500 GVW. FINN T120SII HYDROSEEDER; 1000 GAL; 4 CYL DIESEL ENGINE.
266,560 miles
2006 FREIGHTLINER FL120 TRACTOR; DETROIT 60-140L 6 CYL (515 HP); FULLER 8LL; A/C; ALUMINUM WHEELS; 66K GVW. PALFINGER PK29002 KNUCKLEBOOM; 9 TON; RADIO REMOTE CONTROLS.
$47,500
8544
4 x4
113,855 miles
2005 INTERNATIONAL 7300 4X4; DT466 6 CYL (245 HP); 2 SP XFER CASE; ALLISON 5 SP AUTO; A/C; 33K GVW. CAB & CHASSIS; 177’’WB; 101’’CA.
S A L E S @O P DY K E S .COM
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 53
• NO TIME LIMIT POWER BOOST • INDUSTRY-LEADING SAFETY FEATURES • EXCLUSIVE INDEPENDENT TRAVEL • BEST-IN-CLASS FUEL ECONOMY
WE’VE GOT EXCLUSIVE FEATURES TO GET MORE DONE With KOBELCO excavators on l`] bgZ$ qgm dd Z] hj]hYj]\ for even the toughest ogjckal] [`Ydd]f_]k& L`Yl k Z][Ymk] o] j] [geeall]\ l g Zmad\af_ hjg\m[lanalq%Zggklaf_ features in our machines qgm ogf l Ú f\ Yfqo`]j] ]dk]& O`ad] gl`]j eY[`af]k eYq g^^]j hgo]j Zggkl$ gmjk ak mflae]\ Yf\ gh]jYlgj%[gfljgdd]\& L `]f l`]j] k l`] ]p[dmkan] af\]h]f\]fl ljYn]d ^]Ylmj] l`Yl d]lk qgm \a_$ da^l Yf\ ljYn]d Yl l`] kYe] lae]& O] ]n]f l`gm_`l g^ l`] dalld] l`af_k$ dac] koaf_ Û Yk`]jk Yf\ af\mkljq%d]Y\af_ nakaZadalq l`Yl ]f`Yf[] kY^]lq& Hdmk oal` hj]ea]j gh]jYlgj [ge^gjlk$ q gm ea_`l Y[lmYddq ]fbgq gh]jYlaf_ gmj eY[`af]k&
MINI
SHORT RADIUS KOBELCO-USA.COM
CONVENTIONAL
Page 54 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
VMC Brush Cutters To Fit Most Excavators, Skidsteer & CTL Loaders, And Mini Loaders.
Available In Both Rotary And Flail
Dealer Inquiries Welcome
CRANE RENTALS Serving the Greater Hudson Valley, NY area with
HYDRAULIC TRUCK & ALL TERRAIN CRANES
35 To 275 Ton Capacity V E RY COMPETITIVE OPEN SHOP RATES KINGSTON, NY
845-336-4100
Ditch Witch Unveils New Web-Based HDD Advisor Tool 3.25" X 3.5"
Call Today Or Visit Website For More Details 864-940-9341 • www.vmc-equip.com
Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15
Made in the USA
The SEAL SAVER WILL: Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring
STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:
Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062
The Ditch Witch organization, a Charles Machine Works Company, has released the industry’s first Web-based horizontal directional drilling (HDD) Advisor tool. Customers can use the advisor to quickly determine the right tooling configuration for their Ditch Witch or Vermeer directional drill string. “Time is money for our customers. That’s why we developed this easy-to-use, interactive tool,” said Jaime Wines, director of parts sales and marketing, Ditch Witch. “It gives drill operators the confidence to quickly and correctly select downhole tool options — everything from the SaverLok to the drill pipe to the backreamer — to match the drill unit they’re using and soil conditions on the job.” Historically, identifying the proper tooling for job sites was time-consuming, cumbersome and paper-intensive. The new HDD Advisor gives operators and dealers an intuitive tooling-product roadmap, and quickly recommends configurations and solutions based on a few questions. The new HDD Advisor also includes the option to save drill string configurations for future reference and streamline ordering of replacement parts. Operators can share their drill string configurations with their dealer of choice, and print or email summaries from a PC or mobile device. For more information, visit www.hddadvisor.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
1-800-683-5189 Fax: 770-509-5832
Visit
www.sealsaver.com
for more information or contact us at 1-800-683-5189
Visit CEG’s Web Site at
www.Construction EquipmentGuide.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 55
September 29 – October 1, 2015 Louisville, KY
OPERATE the newest equipment at the LARGEST tradeshow for the utility industry featuring over 850 EXHIBITORS
Get your badge now at www.icuee.com to save 50%
Page 56 â&#x20AC;˘ August 12, 2015 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE
MassDOT Awards Railroad Grants to Support Growth MassDOT awarded five grants totaling just over $2 million for industrial rail projects as part of the 2015 Industrial Rail Access Program (IRAP). Among the grants awarded: $383,913 to Borden & Remington Corp. for Mass Coastal RR rail siding rehab and expansion, safety and unloading dock improvements in Fall River. The IRAP funding for the five projects is being matched by more than $1.7 million in private sector funds for a total $3.7 million investment in freight rail improvements in the third year of the IRAP program. Created as part of the 2012 Transportation Bond Bill, IRAP provides grants to railroads, rail shippers and municipalities that identify a public benefit gained through improved rail transportation usage or economic growth that would be realized through improved access to rail assets. â&#x20AC;&#x153;The IRAP program is an example of government working with the private sector to solve a problem. We are glad to have the opportunity to improve rail access and support industrial uses. It is truly a â&#x20AC;&#x153;win-win,â&#x20AC;? said Stephanie Pollack, secretary of transportation. The five 2015 IRAP recipients represent a variety of projects meeting the program objective of improving the rail network while boosting economic growth. Recipients and the state grant awarded are as follows: â&#x20AC;˘ Borden & Remington Corp. â&#x20AC;&#x201D;
â&#x20AC;&#x153;The IRAP program is an example of government working with the private sector to solve a problem.â&#x20AC;?
Â&#x2026; $"33*&4 1":-0"% 07&3 106/%4 Â&#x2026; )1 $6..*/4 &/(*/& Â&#x2026; */$) 36##&3 53"$,4 Â&#x2026; 41&&% 53"7&- Â&#x2026; ."%& */ 64" Rayco Crawler Trucks are designed as carrier vehicles that can be outfitted with any type of beds/bodies/specialty equipment desired by the end user. The low ground pressure Crawler Trucks are the ideal solution for those off-road jobsites that conventional truck-mounted equipment simply cannot reach. The RCT150 can carry a full 15,000-pound payload with ground pressure of only 4psi. Whether itâ&#x20AC;&#x2122;s a simple flatbed, or specialty equipment like bark blowers and digger derricks, the RCT150 answers the call.
CALL -
800.392.2686
VISIT -
Stephanie Pollack MassDOT
$383,910: Fall River â&#x20AC;&#x201D; Mass Coastal RR rail siding rehab & expansion, safety and unloading dock improvements. â&#x20AC;˘ Catania Spagna â&#x20AC;&#x201D;$500,000: Ayer â&#x20AC;&#x201D; Pan Am Railways rail siding track expansion and unloading improvements. â&#x20AC;˘ Pioneer Valley Railroad â&#x20AC;&#x201D; $175,045: Westfield â&#x20AC;&#x201D; Pioneer Valley RR installation of new rail siding at Railroad Distribution Services facility. â&#x20AC;˘ MWRA â&#x20AC;&#x201D; Fore River Railroad Corp. â&#x20AC;&#x201D; $500,000: Quincy â&#x20AC;&#x201D; Fore River Railroad mainline track realignment/capacity improvements at Fore River Shipyard. â&#x20AC;˘ Providence & Worcester Railroad â&#x20AC;&#x201D; $455,691: Worcester â&#x20AC;&#x201D; P&W Railroad Southbridge Street Yard Wye Track. (This story also can be found on Construction Equipment Guideâ&#x20AC;&#x2122;s Web site at www.constructionequipmentguide.com.)
Whatâ&#x20AC;&#x2122;s going on in your company? We want to know! Would you like your company featured in CEG? If so, give us a call.
Construction Equipment Guide 800/523-2200 or FAX 215/885-2910
editorial@cegltd.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 57
www.jescoditchwitch.us 118 St Nicholas Ave. • South Plainfield, NJ 07080 908-753-8080 • FAX 908-753-7853 Shrewsbury, MA 508-719-0200 Middletown, DE 302-376-0784 Beacon, NY 845-831-1800
Holbrook, NY 631-256-6850 Fairfield, NJ 973-227-2221 Lumberton, NJ 800-241-7070
Page 58 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Paving
SECTION
Pages 59-73
For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.
Suit-Kote Corporation, headquartered in Cortland, N.Y., won the cold-in-place-recycle (binder coarse) portion with an $850,000 contract value.
New York State Highway 243 Benefits From Innovation By Jeff Winke CEG CORRESPONDENT
If state roads were people, New York State Highway 243 would be considered a good ol’ regular guy, probably named Ned or Roger or Bob. When the old refrigerator needs to be muscled down to the basement, Ned, Roger or Bob can be counted on to help. That’s what solid, steady guys do — they are there when you need them. New York State Highway 243 has been a stalwart, 11.03-mi. (17.75 km) east-west state highway in the southern tier of New York since the 1930 re-numbering of state highways in New York. Not a rock ’n roll anthem glory highway, the Ned-Roger-Bob NY 243 has been a utilitarian divided highway that begins at an intersection with NY 98 in the town of
Freedom and proceeds southeastward across mostly rural areas of Cattaraugus and Allegany counties to Rushford Lake and then eastward into the town of Caneadea, where it ends at a junction with NY 19. In 2014, the New York Department of Transportation put out for bid the rehab of 6.6 mi. (10.6 km) of NY 243. The road surface had aged and was displaying both transverse and longitudinal cracking. Suit-Kote Corporation, headquartered in Cortland, N.Y., won the cold-in-place-recycle (binder coarse) portion with an $850,000 contract value. Founded in 1921, Suit-Kote is a medium-size, privately-owned asphalt products manufacturer, road construction, maintenance and asphalt applications engineering company, serv-
ing the Northeast through its 15 locations in New York and Pennsylvania. Suit-Kote principally focuses on roadwork projects. During peak season, the company has 750 employees and maintains a diverse equipment fleet of 21 asphalt pavers, four stabilizers, and 12 milling machines. “For the Highway 243 project, we’re using a modified Roadtec RX-900e milling machine to do single unit cold-in-place recycling,” said Zeke Quinlan, vice president of operations of SuitKote Corporation. “We’ve gone with CIPR with high float emulsion which helps with coatings and improves wintertime freeze/thaw performance by providing a matt with greater flexibility.” According to Quinlan, the modified cold planer has a 1.5-ft. (.4 m) wider frame that provides better
stability, balanced performance and greater productivity. The completely fabricated, welded and assembled machine frame is constructed from A656 Grade 80 steel, which is a specialty grade of steel that measures at twice the strength of mild steel that is commonly used. The modified machine does not have a conveyor so the aggregate millings, with a chemically-stabilized emulsion-binder, are discharged directly to the roadway in a windrow to be collected by the paver equipped with a “windrow pickup machine.” The paver picks the material up off the ground and sends it through to be paved as the CIPR base layer. The cold planer features a four-track assembly and has a Tier IV Caterpillar engine. With input from Suit-Kote, Roadtec performed much of the
cold planer modifications to create the custom single unit cold-inplace recycling machine that it uses. “We made some modifications to fit our needs,” Quinlan said. “Achieving the right weight distribution was a big factor for us, especially with the machine not having a heavy-duty conveyor system.” An Ingersoll Rand ABG Titan 525 paver from Volvo Construction Equipment followed the cold planer and placed the 4½in. (11 cm) CIPR base course. Another contractor will complete the roadway with a 2-in. (5 cm) hot-mix asphalt thinlay finish course. The recycled material is left in a windrow directly behind the mill. A paver equipped with a “windrow pickup machine” picks the material up off the ground and see HIGHWAY page 70
Page 60 • August 12, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
MT-
M413XT
t
Precision Spr y Products shown with optional equipment.
MAULDIN Paving Products is dedicated to developing products that exceed expectations. See for yourself what makes the industry’s best and heaviest screed lay down the Superior mats your company desires. With 10 years under the belt of proven results, the 10th Anniversary, Silver-16 Screed is better than ever.
MAULDIN Paving Products... MASTERS OF THE MA AT! T! N dealership today and review all the choices available from the MAULDIN Contact your MAULDIN 1750-C 2I¿FLDO &DWDORJ WR VSHF RXW D & WKDW SHUIHFWO\ PDWFKHV \RXU SDYLQJ SUHIHUHQFHV
GEORGE
ASSOCIATES, INC. Construction and Industrial Equipment
2340 Montgomery George Associates, Inc. Street Silver Spring, MD 20910
P Fax: 301-588-6605
2340 Montgomery St. Silver Spring, MD 20910 (301) 589-9490 Fax: (301) 588-6605 www.georgeassociates.info
Asphalt Care Equipment & Supplies 2765 Galloway Road Bensalem, PA 19020 (215) 639-9800 (800) 223-1202 Fax: (215) 639-9802 www.asphaltcare.com
Woodco Machinery
East PBE Inc.
www.woodcomachinery.com
283 Pane Rd. Newington, CT 06111 (860) 665-7470 Fax: (860) 665-7478 www.pbeinc.com
60 Shun Pike Johnston, RI 02919 (401) 942-9191 Fax: (401) 942-9266
140 Wales Avenue Avon, MA 02322 (781) 935-3377 Fax: (781) 935-1563
22 North Maple Street Woburn, MA 01801 (781) 935-3377 Fax: (781) 935-1563
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 12, 2015 • Page 61
All Roads Lead To CC&T For Milling, Paving & Recycling Equipment
Midland Road Wideners & Attachments
Carlson Asphalt Pavers
Etnyre Distributor Trucks
Bagela Asphalt Recyclers
Roadtec Milling Machines
Roadtec Paving Machines
CC&T is the Most Focused Asphalt Paving & Milling Dealer in the U.S.A. Contact Mike Chenet Office: 610-586-2710
The Highway Equipment Authority 1545 Hook Road, Folcroft, PA 19032 • voice 610.586.2710 • fax 610.586.2740 300A S. Randolphville Road, Piscataway, NJ 08855 • voice 732.752.2828 • fax 732.752.1188
www.constructioncraneandtractor.com Representing these top-of-the-line manufacturers: ROADTEC • Kennametal • Etnyre • Midland • Carlson • Bagela • Rockster Authorized Distributors for:
®
ROADTEC an Astec company
• Road Wideners & Attachments
• DistributorTrucks
• Paving Products
Page 62 • August 12, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
1-800-223-1202 I WWW.ASPHALTCARE.COM 2765 Galloway Road • Bensalem, PA 19020 WE SUPPLY PARTS FOR IR/BLAW KNOX, DYNAPAC, MARATHON, MAULDIN, YANMAR, NEAL, CIMLINE, TOWMASTER, ATLAS COPCO AND MANY OTHERS
In Stock
In Stock
$83,000
$69,900
$91,000
MARATHON UMCK 145T OIL JACKETED MELTER 145 Gal. Capacity, Hydraulic Agitation, Auto Temp Control, Overnight Heater, Safety Load Lid.
ATLAS COPCO LP8504 PADFOOT TRENCH COMPACTOR Remote Control, Hatz Diesel, 33” Padfoot Drums, 3693 Lbs. Static Weight / 16,500 Lb. Centrifugal Force
2012 DYNAPAC CC384HF ROLLER 250 Hrs, Cummins, 20,700 lb Oper. Weight, 68” Drums w/High Frequency Vibration, Asphalt Temp. Sensor, 90 Day Parts Warranty
2011 DYNAPAC CC224HF ROLLER 605 Hrs, Cummins, 16,980 lb Oper. Weight, 59” Drums w/High Frequency Vibration, Asphalt Temp. Sensor, 90 Day Parts Warranty
2013 DYNAPAC PL350 PLANER 290 Hrs, Cummins, 7700 lb Oper. Weight, 13.7” Mill Head, 4” Cut Depth, Rear Conveyor Loads Bucket, Ideal for Utility Cuts & Joints, 90 Day Parts Warranty
TE LOW RA ILABLE NG AVA I C N A N I F
MARATHON ROAD EQUIPMENT IN STOCK!
Oil Jacketed Kettles, Hot Mix Transporters, Tack Distributors, AC-20 Kettles, and Infrared Asphalt Repair
Atlas Copco CC Rollers Feature Easy-Access Service Points The Atlas Copco Dynapac range of large, articulated tandem asphalt rollers provide optimal operator comfort and visibility and minimize maintenance with an easily accessible engine. The range includes several models, from the CC2200 to the CC6200, and can be equipped with Atlas Copco’s new intelligent compaction system to provide realtime stiffness readings for superior asphalt compaction. Atlas Copco designed all of its CC rollers, including the CC2200 and CC6200, with service points that are easy to access. This includes positioning the engine on the rear module and incorporating large, easy to-open engine hoods. Servicing information displays directly on the driver’s LCD and also indicates what servicing needs to be completed. All rollers feature a lubrication-free steering hitch and steering cylinder. The CC rollers also feature corrosion-free water tanks and sprinkler tubes, in combination with easily accessible filters for enhanced reliability and easy maintenance. Contractors can replace hydraulic hoses in individual segments, saving hassle and costs associated with replacing full lengths of the hoses. The CC rollers are built with parts similar to other Atlas Copco equipment. This means less inventory for dealers and parts that are readily available for fast turnaround times and
less downtime. The CC large range rollers also enhance productivity by maximizing operator visibility and comfort. They feature sideways-sliding seats and steering modules that also rotate
with the operator, which helps improve visibility for optimal control and compaction. And since the engines are located at the back of the rollers there is less heat and noise affecting the operator. The large range rollers feature Tier IV Interim engines and are available with Atlas Copco’s optional ECO Mode system. ECO Mode is an rpm-management system that delivers to the roller only the amount of power that is necessary to operate at any given time. This system reduces fuel consumption by as much as 20 percent, according to the manufacturer. Contractors can equip the asphalt rollers with the new version of Atlas Copco’s intelligent compaction system that provides real time temperature readings. This delivers immediate relative stiffness results on asphalt, which helps minimize the number of passes. For more information, call 800/732-6762 or visit www.atlascopco.us. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
The Atlas Copco CC6200 tandem roller is fast and simple to maintain with easily accessible parts.
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 12, 2015 • Page 63
S TEPHENSON E QUIPMENT, I NC .
Frederick, MD 21703 301-874-5500
South Plainfield, NJ 07080 908-753-8080
Delmar, MD 21875 410-546-1090
Fairfield, NJ 07004 973-227-2221
Jesco, Inc.
Lumberton, NJ 08048 609-267-2020
Holbrook, NY 11741 631-256-6850
White Plains, MD 20695 301-870-1438
Beacon, NY 12508 845-831-1800
Baltimore, MD 21237 410-687-1700
Middletown, DE 19709 302-376-0784
www.jesco.us
Stephenson Equipment, Inc.
C.N. Wood Co., Inc.
Philadelphia, PA 800-220-4033
Syracuse, NY 800-368-6455
Woburn, MA 781-935-1919
Whately, MA 413-665-7009
Harrisburg, PA 800-325-6455
Albany, NY 518-357-2200
Avon, MA 508-584-8484
Johnston, RI 401-942-9191
Wilkes-Barre, PA 866-667-6756
www.stephensonequipment.com
www.cn-wood.com
Page 64 • August 12, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
866-430-7539
www.jfwequipment.com
RIDEABILITY WITH VERSATILITY
sales@jfwequipment.com
Serving the Asphalt Industry for 25 Years 2005 Cat AP1055D track paver, Extend-A-Mat 10-20B electric heated screed, power crown, slope & height, Cat C7 dsl eng, auger sensors
2007 Bomag BW9AS static roller, 5-8 ton, Cummins 4 cylinder diesel engine, water system (2000 yr model also available)
2004 Rosco Maximizer II distributor, 1950 gallons, EZ-2S computer w/1 ft cut-offs, diesel heat, 12 ft spray bar, Sterling w/Cat C7 diesel eng, 6 spd trans, 2 spd axle
Together the Vögele Vision 5200-2i paired with a Vögele screed deliver precise results in all applications.
2011 Used Marathon KERA10 walk behind crack sealer, 10 gallons, single propane burner, manual full sweep agitation, oil jacketed, heated 3/4" discharge valve (new also available)
Rideability: efficient material handling and superior controllability with precise straight-line tracking and smooth, accurate turns.
2009 Hamm HD14VV double drum 54” vibratory roller, Hatz 40 hp water cooled diesel engine, double drum drive, water system, hydrostatic drive
Versatility: pick the screed to match the applicaiton – all mounted on one tractor! • Front mounted extension screed: multi-variable width paving and mainline paving applications • Rear mounted extension screed: mainline rideability and mainline density • Compaction screed: maximize in-place density, asphalt and roller compacted concrete applications When quality of pavement matters, rely on Vögele pavers and screeds to get the job done.
New Marathon TPS250T tack distributor, Honda 5.5hp gas eng, 10GPM pump, 250 gallons, 5 ft spray wand w/40 ft hose, 10" filler lid, hose reel, 2 propane burners, 2009 & 2006 Omni 318 screeds, 10-18 ½ ft, electric heat, fits Volvo 6160, 6170, 6110 pavers, power crown flushing tank, molasses valve, electric brakes, pintle & slope, power screed up & down extensions hitch
www.wirtgenamerica.com
ROAD AND MINERAL TECHNOLOGIES
ELLIOTT & FRANTZ, INC.
New Marathon HEPR36 walk behind infrared heater, 3 ft x 3 ft, 360,000 BTU
2007 Blaw Knox PF 2181 paver, Omni IA screed 8-13 ft w/diesel heat, power crown & slope, Cummins 5.9L diesel engine, front wheel assist, all new tires
3517 Wayne White Rd., Climax, NC 27233
10421 Guilford Road Jessup, MD 20794 301/725-7394 Fax: 301/725-7361
38420 Sussex Highway Delmar, DE 19940 302/846-3033 Fax: 302/846-0763
12051 Tac Court Manassas, VA 20109 703/257-2381 Fax: 703/257-2383
450 E. Church Road King of Prussia, PA 19406 610/279-5200 Fax: 610/279-6366
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 12, 2015 • Page 65
The Best Tilt Hopper Paver Just J Got Better
Introducing the 1000G
ALL ISLAND EQUIPMENT 39 Jersey Street West Babylon, NY 11704 631/643-2605 631/643-4060 allislandequipment.com
HOFFMAN EQUIPMENT COMPANY 1440 Route 9W Marlboro, NY 12542 845/236-3000 www.hoffmanequip.com
JESCO 1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080 Fax: 973/575-5553 118 St. Nicholas Ave. S. Plainfield, NJ 07080 908/753-8080 800/241-7070 Fax: 908/753-7853 www.jesco.us
STEPHENSON EQUIPMENT, INC. Harrisburg, PA 800/325-6455 Fax: 717/564-7580 Wilkes-Barre, PA 866/667-6756 Syracuse, NY 800/368-6455 Albany, NY 518/357-2200
W.I. CLARK 30 Barnes Ind. Pk. Rd. Wallingford, CT 06492 203/265-6781 Fax: 203/294-1216 15 Station Rd. Brookfield, CT 06804 203/775-1203 Fax: 203/740-2579 80 Pratt Rd. Plainfield, CT 06374 860/546-4808 Fax: 860/564-6928 www.wiclark.com
g 8 - 13 ft LeeBoy Legend Screed System LeeBoy’s Under Auger Cut Off Gates 9” Steel Alloy Segmented Cast Augers Low Deck Configuration Hydrostatic Propulsion Controls Dual Control Stations Steel Track Drive with Automatic Adjustment
AMBROSE EQUIPMENT CO. MONROE TRACTOR 1001 Lehigh Station Rd. Henrietta, NY 14467 585/334-3867 866/683-5338 5035 Genesee Street Buffalo, NY 14225 716/681-7100 800/834-9606 www.monroetractor.com
1401 Hooksett Rd. Hooksett, NH 03106 603/644-8787 1 Madison Street Plainville, MA 02762 508/643-0044 www.ambroseequipment.com
www. VT LeeBoyy,, Inc.
. com
500 50 Lincoln County Pkwy Ext., Lincolnton, NC 28092
Call 704.966.3300
US MUNICIPAL SUPPLY INC.
VALLEY SUPPLY & EQUIPMENT CO., INC.
King of Prussia, PA 800/733-3776 www.usmuni.com
20332 Leitersburg Pike Hagerstown, MD 21742 301/733-7414 1109 Middle River Rd. Baltimore, MD 21220 410/780-4000
or
www www.LeeBoy .LeeBoyy.com
WALSH EQUIPMENT INC. 796 Unionville Rd. Prospect, PA 16052 724/865-9221 2350 Munster Rd. Lilly, PA 15946 814/886-5191 walshequipmentinc.com
Page 66 • August 12, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
39 Jersey Street West Babylon, NY 11704 631/643-2605 Fax: 631/643-4060 www.allisland equipment.com
1440 Route 9W Marlboro, NY 12542 845/236-3000 www.hoffmanequip.com
1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080 Fax: 973/575-5553 118 St. Nicholas Ave. S. Plainfield, NJ 07080 908/753-8080 800/241-7070 Fax: 908/753-7853 www.jesco.us
THE W.I. CLARK COMPANY 30 Barnes Ind. Pk. Rd. Wallingford, CT 06492 203/265-6781 Fax: 203/294-1216 15 Station Rd. Brookfield, CT 06804 203/775-1203 Fax: 203/740-2579 80 Pratt Rd. Plainfield, CT 06374 860/546-4808 Fax: 860/564-6928 www.wiclark.com
King of Prussia, PA 800/733-3776 www.usmuni.com 1001 Lehigh Station Road Henrietta, NY 14467 585/334-3867 866/683-5338 1701 Roseneath Rd., Richmond, VA 23230 804/359-4048
5035 Genesee Street Buffalo, NY 14225 716/681-7100 800/834-9606 monroetractor.com
Harrisburg, PA 800/325-6455 Fax: 717/564-7580
20332 Leitersburg Pike Hagerstown, MD 21742 301/733-7414
796 Unionville Rd. Prospect, PA 16052 724/865-9221
Wilkes-Barre, PA 866/667-6756
1109 Middle River Rd. Baltimore, MD 21220 410/780-4000 www.valleysupply equipment.com
2350 Munster Rd. Lilly, PA 15946 814/886-5191 walshequipmentinc.com
Syracuse, NY 800/368-6455 Albany, NY 518/357-2200
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 12, 2015 • Page 67
Tracey Road Equipment Syracuse 6803 Manlius Center Rd East Syracuse, NY 13057 315-437-1471 Binghamton 1523 Route 11 North Kirkwood, NY 13795 607-775-5010 Rochester 300 Middle Rd Henrietta, NY 14467 585-334-5120 Watertown 19598 Cady Road Adams Center, NY 13606 315-788-0200 Albany 115 Railroad Ave. Albany, NY 12205 518-438-1100 www.traceyroad.com
A. Montano Co, Inc. 571 Route 212 Saugerties, NY 12477 845/247-0206 Fax: 845/247-9321 www.amontano.com
Midlantic Machinery 2240 Bethlehem Pike Hatfield, PA 19440 215-822-0145 Fax: 215-822-7971 6375 Allentown Blvd. Harrisburg, PA 17112 717-652-3190 Fax: 717-540-0251 1261 Highway 315 Wilkes Barre, PA 18702 570-824-9891 Fax: 570-822-3561
Best Line Equipment
E.W. Sleeper Company, Inc.
Groff Tractor New Jersey, LLC
Highway Equipment Company
6 S. Eleanor Ave. Frackville, PA 17931 570-874-6140 Fax: 570-874-4200
25 Legion Rd. Muncy, PA 17756 570/546-8422
391 Loudon Rd. Concord, NH 03302 603/225-3361 800/358-6007 Fax: 603/225-4918
551 N. Harding Highway Vineland, NJ 08630 800-874-2650
22035 Perry Highway Zelienople, PA 16063 724/452-7800 Fax: 724/452-7030
1400 Joh Avenue Baltimore, MD 21227 410-247-2100 Fax: 443-543-0344
212 Monmouth Rd. Freehold, NJ 07728 800-874-2659
McKean, PA 814/476-7755
200 Bomont Place Totowa, NJ 07512 800-558-7426
Dubois, PA 814/371-3600
28587 Sussex Hwy. Laurel, DE 19956 302-715-5382 Fax: 302-715-5384
183 Tomahawk Rd. Towanda, PA 18848 570/265-4440 8001 Possom Hollow Rd. Shippensburg, PA 17257 717/530-8400 www.bestline.com
www.ewsleeper.com
www.grofftractor.com
www.highway-equipment.com
www.midlanticmachinery.com
Page 68 • August 12, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Precision Asphalt Paving: Best Practices for Compaction This article is the third of a four-part series on paving provided by Volvo Construction Equipment Successful asphalt paving projects don’t happen by accident. They are the result of careful planning and proper preparation. From proper paver setup to achieving optimum mat temperature and conducting the rolling pattern at just the right time — each step in the process will affect the next. And attention to detail throughout the process can mean the difference between getting a bonus and being delayed. In the previous installments, best practices for paver setup and laying a quality mat have been addressed. After the mat has been laid, proper compaction is key to ensuring the longevity of the road. The pavement must be able to cope with unexpected loads, heavy traffic flow and, depending on location, wear and tear from harsh winter weather. Following these compaction best practices will preserve asphalt integrity, and delay the need for road maintenance and repairs. Compaction Compaction is an essential part of the road construction process. Without proper compaction or densification, the finished roadway will not provide the sufficient level of support needed for structures or traffic loads, and eventually a breakdown of material will occur. There are three key factors that contribute to quality compaction: • Mat temperature • Mat depth or thickness • Compactor rolling pattern PLEASE CONTACT YOUR BAGELA ASPHALT RECYCLER DEALER:
www.ehrbar.com
Yonkers, NY
www.centralequipmentco.com
4 Executive Plaza, Yonkers, NY 10701 914-738-5100
Stillwater, ME 45 Dempsey-Greaves Lane, Stillwater, ME 04489 800-479-6193 Fax: 207-827-3774
Holbrook, NY 601 Coates Ave., Holbrook, NY 11741 631-563-7600
Gorham, ME 54 Olde Canal Way, Gorham, ME 04038 800-479-6193
Danbury, CT 42 Kenosia Ave., Danbury, CT 06810 203-743-0088
Construction, Crane & Tractor www.constructioncraneandtractor.com
Folcroft, PA 1545 Hook Rd., Folcroft, PA 19032 610-586-2710
Piscataway, NJ 300A S. Randolphville Rd., Piscataway, NJ 08855 732-752-2828
US Distributor www.pavementrecyclers.com
70 Platt Road Shelton, CT 06484 203-944-0525
factor. Mat depth, or thickness, is established by a project engineer who determines the estimated usage and traffic volume for the intended pavement. It is initially part of the paving crew’s responsibility to set the correct angle of attack, but compaction plays a role in the “finished” mat thickness. “There’s a 20 to 25 percent rule of thumb when it comes to compacting the right thickness,” said Tomlinson. “So if you want a 2inch mat, the paver would lay a 2-and-a-halfinch mat. The roller would compact it, and the finished mat is 2 inches thick.” The Future of Intelligent Compaction Topics surrounding intelligent compaction (IC) have gained momentum in the industry over the last decade, and for good reason. IC technology allows for better record-keeping, increased compaction uniformity, automation and increased productivity for road crews. Also, IC technology ultimately saves time on the job site, since it eliminates the need to take physical samples to determine mat stiffness — this measurement is continually recorded and monitored with an IC system. However, previous IC systems were missing a large piece of data that is critical to the integrity of the finished road, and more accurate measurement than mat stiffness alone — an exact density measurement. Density Direct from Volvo Construction Equipment — which will launch fall of 2015 — provides this critical component to the operator through an Android-based touch-screen monitor, similar to that of a smartphone. The Density Direct interface displays a map with color-coded density readings in addition to the numerical reading for density, the number of passes and temperature. When fully calibrated, the density calculations have been shown to be accurate to within 1.5 percent of the measured value of core samples. The ability to have such an accurate density reading is crucial for several reasons. Density Direct reduces the need for core sampling and improves productivity and quality, as operators receive real-time density calculations covering 100 percent of the compacted mat, versus the traditional option of nuclear gauge testing, which is more timeconsuming and provides only “spot-check” results.
Mat Temperature The first rule of compaction is to monitor mat temperature. Compaction must be accomplished while the mix has enough fluidity to allow aggregate particle movement in order to remove voids and excess air in the pavement structure. In some instances, the time available for compaction can be as limited as 10 minutes. “The key is to not let the mat temperature get too low because then you can’t work with it,” said Wayne Tomlinson, compaction training specialist, Volvo Construction Equipment. “The roller operator needs to get on the mat as soon as safely possible after it is laid.” The cooling of HMA is predictable and can be anticipated based on prior experience and current ambient conditions. A compactor operator should keep notes on projects and different types of materials to determine best temperatures. “When you find a temperature zone that gets your best density and smoothness, that’s the zone you need to work in all day,” said Tomlinson.
Next Up: Rolling Pattern With a properly laid and compacted mat, the final — and especially crucial — step in the process is the rolling pattern. Stay tuned for the final installment in the Precision Asphalt Paving 101 series, which will cover best practices for rolling pattern, as well as safety considerations.
Mat Depth or Thickness Thickness is an important compaction
(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 12, 2015 • Page 69
Page 70 • August 12, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
The Worldwide Leader in Concrete Paving Technology
Contractor Expects CIPR to Save Firm 50 Percent on Materials HIGHWAY from page 59
info@gomaco.com ❘ www.gomaco.com CONCRETE STREETS AND HIGHWAYS ❘ AIRPORT RUNWAYS ❘ CURB AND GUTTER ❘ SIDEWALKS RECREATIONAL TRAILS ❘ SAFETY BARRIER ❘ BRIDGE PARAPET ❘ BRIDGE DECKS ❘ IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA ❘ 712-364-3347
Murrysville, PA
Somerset, PA
724/327-1300
814/445-7915
Lantz Corners, (Kane), PA
Cranberry Twp., PA
814/778-5250
724/776-1400
Clearfield, PA
Erie, PA
Clarksburg, WV
814/765-1611
814/898-3388
304/842-2222
sends it through the paver. Now the “CIPR base layer” is paved. An additional new layer of hot mix asphalt will finish the process The NY 243 road surface is a single-lane divided rural highway measuring 22-ft. (6.7 m) across with 4-ft. (1.2 m) shoulders on each side. With a milling depth of 4½-in., a total of 143,000 sq. yds. (370,368 sq m) was milled and all of it was recycled. For this New York State Highway project, Suit-Kote has 12 of its workers dedicated. The contractor will complete the project in 11 days with an additional 10-day cure. The entire roadway upgrade project is expected to be completed in approximately five to six weeks “Our purpose-designed RX-900e saves us time and money on the NY 243,” Quinlan said. “It is more practical than a complete mill-and-fill, plus we’re recycling 100 percent of the milled old roadway and ensuring non-stop paving.” The contractor expects that the CIPR will save approximately 50 percent of materials cost, as well as considerable cost savings for
trucking — both the trucking of road millings out and HMA brought in — if traditional road rehab methods had been used. Suit-Kote Corporation has been a Roadtec customer for more than two decades, which may explain — in part — the comfort they had in modifying the RX-900e milling machine to their needs. “Over the years, we’ve had good luck with our Rodtec machines,” said Quinlan. “As a matter of fact, we still run an old RX70 cold planer almost every day... and that sweetheart of a machine is 25 years and counting.” With the Suit-Kote portion of the New York State Highway 243 rehab project approaching the end, Zeke Quinlan said: “Our goal is always to end our project knowing we played a role in creating a highway with a smooth ride. It feels good to know that the people who depend on this 6.6-mile stretch will have a good highway for years to come.” (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 12, 2015 • Page 71
Contact your local dealer: CHADWICK-BAROSS, INC. Bangor, ME 207.942.4838 Caribou, ME 207.498.2547 Westbrook, ME 207.854.8411 Concord, NH 603.224.4063 GEORGE ASSOCIATES, INC. Silver Spring, MD 301.589.9490 HIGHWAY EQUIPMENT & SUPPLY CO. Drums, PA 570.788.1127 Ephrata, PA 717.859.3132
Contact PA your Harrisburg, 717.564.3031
local dealer:
Dealer Lock Haven, Name PA 570.769.1070 City, S T PENN JERSEY Deptford, NJ 123.456.7890 856.227.6400 Frenchtown, NJ City, ST 908.824.4200
123.456.7890
Staten Island, NY 718.448.2444
City, SPA T Lionville, 610.363.9200 123.456.7890 TYLER EQUIPMENT , ST E.City Longmeadow, MA 413.525.6351 123.456.7890 Berlin, CT 860.356.0840 City, ST
123.456.7890 VANTAGE EQUIPMENT Batavia, NY 585.344.1931 City, ST Latham, NY 123.456.7890 518.220.9500 Syracuse, NY City, ST 315.437.2611
You’re serious about getting your bonus. And your crew thanks you.
123.456.7890 WOODCO MACHINERY Avon, MA City, ST 508.584.8484
123.456.7890 Woburn, MA 781.935.3377 City, STRI Johnston, 401.942.9191 123.456.7890
Our line of paavvers and compactors sets the standard for reliable asphalt paving. We have a long history of proven technology and a reputation for industry-leading innovation. When it comes to maximizing your earnings, these machines deliver. See smart in action at volvoce.com/smartroads.
DEALER DEALER LOGO
Page 72 • August 12, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
ELLIOTT & FRANTZ, INC 10421 Guilford Road • Jessup, MD 20794 301/725-7394 Fax: 301/725-7361 38420 Sussex Highway • Delmar, DE 19940 302/846-3033 Fax: 302/846-0763 12051 Tac Court • Manassas, VA 20109 703/257-2381 Fax: 703/257-2383 450 E. Church Road • King of Prussia, PA 19406 610/279-5200
MONROE TRACTOR
The Terex FD5000 “Great Lakes” front discharge mixer truck is the first Terex mixer truck powered by a compressed natural gas (CNG) engine.
Terex Introduces CNG Powered FD5000 ‘Great Lakes’ Mixer Truck The Terex FD5000 “Great Lakes” front discharge mixer truck is the first Terex mixer truck powered by a compressed natural gas (CNG) engine. The new 12-L Cummins ISX12G engine is available in 350-, 385- and 400-hp (261, 287 and 298 kW) packages with respective torque settings of 1,450-, 1350- and 1450-ft.-lb. (1965-, 1830- and 1965 Nm), delivering comparable performance to diesel power package options for Terex mixer trucks. “Previous 9-liter engines available on the market didn’t provide the power or torque required for our customers and their applications,” said Dave Rinas, director of sales and marketing of Terex Construction. “The 12-liter engines deliver the required performance and a substantial fuel cost savings benefit when compared to diesel engines. We already have several customer orders for the CNG trucks.” Terex CNG trucks feature an integrated design approach, and the CNG engines are available for the entire line of standard and federal bridge formula front discharge mixers — from three to seven axles. The CNG engines also can be ordered as part of the Terex glider truck program. “Everything below the frame rail and forward of the rear pedestal is the same as on our diesel mixer trucks,” said Mike Johnson, design engineer of Terex. “The CNG system eliminates much of the complexity that goes along with 2013 EPA-compliant engines, while still reducing hydrocarbon emissions.” The Terex design mounts one, 26- by 80-in. (66 by 203 cm) Type-4 CNG tank to each side of the rear frame, providing a 75 diesel equivalent gallon (284 L) capacity. The design delivers a lower center of gravity compared to other installations; reduces the number of required tanks, hoses and tank safety systems by 50 percent; and places all tank safety shut-off valves, fill ports and service items at ground level. This mounting approach features a spherical bearing design that allows for tank length and diameter
expansion/contraction when filling and compensates for frame flexing when driving in off-road conditions, unlike the rigid strap-mount of competitive tank designs. The two-tank Terex CNG configuration reduces weight by up to 25 percent over other designs, which helps to improve payload capabilities. Up to 50 percent of internal steel was removed from the new engine cowling for CNG trucks — further reducing truck weight to improve payload capacity — while the design’s new ribs and contours add strength and style for this new integrated Terex look. Weight distribution between axles of CNG and traditional dieselfueled mixer trucks are virtually identical, so reconfiguration of truck design to compensate for weight distribution is not necessary. The Terex FD5000 “Great Lakes” CNG front discharge mixer enjoys the same design enhancements recently introduced on their diesel-powered truck counterparts. The steering system takes advantage of the front axle’s full wheel cut capability, reducing turn radius by up to 25 percent over previous designs. The air system features a 127 part-count reduction, resulting in fewer connections for less air leakage potential. The lift axles are now controlled by a single lift axle control module (LACM), which replaces four valves per axle, improving system servicing ease. Inside the cab, taller drivers will benefit from an additional 8.5 in. (21.6 cm) of floor space. A redesigned dashboard features logical positioning of gauges, including a traditional style fuel gauge, for improved operating efficiency. Brighter LED cabin lighting with door entry switch makes it easier to enter/exit the cab. Rear vents and louvers help to improve cab heating and make it easier to close the door. Accessing the cab is now easier, due to the stair rail handle and flexible hanging third step. For more information, visit www.terex.com/construction. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
1001 Lehigh Station Road • Henrietta, NY 14467 585/334-3867 Fax: 585/334-0001 5035 Genesee Street • Buffalo, NY 14225 716/681-7100 Toll Free: 800/834-9606 7300 Eastman Road • N. Syracuse, NY 13212 315/452-0000 Toll Free: 800/287-5286 110 Old Ithica Road • Elmira, NY 14845 607/739-8741 6 Equipment Drive • Binghamton, NY 13904 607/754-6570
EDWARD EHRBAR, INC. 4 Executive Plaza • Yonkers, NY 10701 914/738-5100 Long Island 601 Coates Ave. • Holbrook, NY 11741 631/563-7600 New York City 718/626-3331 42 Kenosia Avenue • Danbury, CT 06810 203/743-0088 Fax: 203/743-0266
SCHMIDT EQUIPMENT INC. 80 Southbridge Rd. • Route 20 • North Oxford, MA 01537 508/987-8786 • 800/922-8295 Fax: 508/987-3578 2397 GAR Highway • Rte 6 & 136 • North Swansea, MA 02777 508/379-9810 • 800/456-6885 Fax: 508/379-1160 88 Camelot Drive • Unit 42 • Plymouth, MA 02360 508/830-9997 • 800/916-0997 Fax: 508/830-1014 1620 Page Blvd • Springfield, MA 01104 413/543-5595 • 800/734-5594 Fax: 413/543-5871 10 Republic Road • North Billerica, MA 01862 978/667-4345 • 800/531-2266 Fax: 978/667-4810 www.schmidtequipment.com 12:55 PM
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 12, 2015 • Page 73
UNBEATABLE TEAM.
The Wirtgen Group owes its strength to the excellence of its four product brands – Wirtgen, Vögele, Hamm and Kleemann – with their unique wealth of experience. Put your trust in the Wirtgen Group team.
www.wirtgenamerica.com
ROAD AND MINERAL TECHNOLOGIES
AMBROSE EQUIPMENT CO. 1401 Hooksett Road Hooksett, NH 03106 603/644-8787 Fax: 603/644-8747 www.ambroseequipment.com
GROFF TRACTOR & EQUIPMENT, INC. 6779 Carlisle Pike Mechanicsburg, PA 17050 800/33-GROFF 800/33-(47633)
210 Rolling Ridge Drive Bellefonte, PA 16823 888/47-GROFF 888/47-(47633)
963 South Center Avenue New Stanton, PA 15672 888/82-GROFF 888/82-(47633)
20 Stauffer Lane Ephrata, PA 17522 888/66-GROFF 888/66-(47633)
100 Smith Drive Cranberry Twp., PA 16066 877/33-GROFF 877/33-(47633)
4355 Admiral Peary Hwy Ebensburg, PA 15931 877-97-GROFF 877-97-(47633)
CENTRAL EQUIPMENT COMPANY 45 Dempsey-Greaves Lane Stillwater, ME 04489 800/479-6193 Fax: 207/827-3774
BINDER MACHINERY CO.
THE W.I. CLARK CO.
2820 Hamilton Blvd. South Plainfield, NJ 07080 908/561-9000 Fax 908/561-2844
30 Barnes Industrial Park Rd. Wallingford, CT 06801 203/265-6781 Fax 203/294-1216
South Jersey Facility – Winslow Twp. 201 North Route 73 Winslow Township, NJ 08095 856/767-5900
15 Station Road Brookfield, CT 06804 203/775-1203 275 Route 32 Plainfield, CT 06374 860/546-4808
Page 74 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Contact your local dealer: Chadwick-BaRoss Westbrook, ME 207.854.8411
Penn-Jersey Deptford, NJ 856.227.6400
Bangor, ME 207.942.4838
Frenchtown, NJ 908.824.4200
Caribou, ME 207.498.2547
Lionville, PA 610.363.9200
Concord, NH Staten Island, NY 603.224.4063 718-448-2444 Contact your local dealer: Highway Equipment Dealer Name & Supply Co. Harrisburg, PA 717.564.3031 City, ST 123.456.7890 Drums, PA 570.788.1127 City, ST Ephrata, PA 123.456.7890 717.859.3132
Rudd Pittsburgh, PA 412.741.1731 Clearfield, PA 814.765.8500 Charleston, WV 304.755.7788
LockCity Haven, , ST PA 570.769.1070 123.456.7890
Tyler Equipment East Longmeadow, MA 413.525.6351
Malvese City, STNY Hicksville, 123.456.7890 516.681.7600
Berlin, CT 860.356.0840
Riverhead, City, STNY 631.369.1147 123.456.7890 McClung Logan City, ST Equipment 123.456.7890 Company, Inc. Baltimore, MD 410.242.6500 City, ST 123.456.7890 Manassas, VA 703.393.7344 City, ST Winchester, VA 123.456.7890 540.722.3700 Chesapeake, City, ST VA 757.485.3314 123.456.7890 Richmond, VA City, ST 804.266.0000 123.456.7890 Roanoke, VA 540.989.3750 City, ST Wise, VA 123.456.7890 276.328.8027
Vantage Equipment Latham, NY 518.220.9500 Batavia, NY 585.344.1931 Syracuse, NY 315.437.2611 Woodco Machinery Woburn, MA 781.935.3377
Some companies have you choose power or fuel efficiency. You chose both.
Bridgeville, City, ST DE 302-337-3400 123.456.7890
Only V Volv olvo delivers on a true fuel efficiency guarantee so you never haavve to compromise on performance or productivity. And with CareT Track machine monitoring, you can focus your attention on more important Talk alk to us today, or get the details at volvoce.com/smartfuel. things — like growing your business. T
DEALER DEALER LOGO
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 75
Page 74 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Contact your local dealer: Chadwick-BaRoss Westbrook, ME 207.854.8411
Penn-Jersey Deptford, NJ 856.227.6400
Bangor, ME 207.942.4838
Frenchtown, NJ 908.824.4200
Caribou, ME 207.498.2547
Lionville, PA 610.363.9200
Concord, NH Staten Island, NY 603.224.4063 718-448-2444 Contact your local dealer: Highway Equipment Dealer Name & Supply Co. Harrisburg, PA 717.564.3031 City, ST 123.456.7890 Drums, PA 570.788.1127 City, ST Ephrata, PA 123.456.7890 717.859.3132
Rudd Pittsburgh, PA 412.741.1731 Clearfield, PA 814.765.8500 Charleston, WV 304.755.7788
LockCity Haven, , ST PA 570.769.1070 123.456.7890
Tyler Equipment East Longmeadow, MA 413.525.6351
Malvese City, STNY Hicksville, 123.456.7890 516.681.7600
Berlin, CT 860.356.0840
Riverhead, City, STNY 631.369.1147 123.456.7890 McClung Logan City, ST Equipment 123.456.7890 Company, Inc. Baltimore, MD 410.242.6500 City, ST 123.456.7890 Manassas, VA 703.393.7344 City, ST Winchester, VA 123.456.7890 540.722.3700 Chesapeake, City, ST VA 757.485.3314 123.456.7890 Richmond, VA City, ST 804.266.0000 123.456.7890 Roanoke, VA 540.989.3750 City, ST Wise, VA 123.456.7890 276.328.8027
Vantage Equipment Latham, NY 518.220.9500 Batavia, NY 585.344.1931 Syracuse, NY 315.437.2611 Woodco Machinery Woburn, MA 781.935.3377
Some companies have you choose power or fuel efficiency. You chose both.
Bridgeville, City, ST DE 302-337-3400 123.456.7890
Only V Volv olvo delivers on a true fuel efficiency guarantee so you never haavve to compromise on performance or productivity. And with CareT Track machine monitoring, you can focus your attention on more important Talk alk to us today, or get the details at volvoce.com/smartfuel. things — like growing your business. T
DEALER DEALER LOGO
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 75
Page 76 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Page 78 • August 12, 2015 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide
see CHART page 93
Loader SAE HP (kw)
Model
Loader Lift Capacity lbs. (kg)
CATERPILLAR 450F 415F2 416F2 420F2 420F2 IT 430F2 430F2 IT
127 (95) 68 (51) 87 (65) 93 (69) 93 (69) 108 (81) 108 (81)
3,938 (1,786) 2,466 (1,189) 2,466 (1,189) 3,168 (1,437) 3,168 (1,437) 3,493 (1,584) 3,493 (1,584)
JOHN DEERE 310L EP 310L 310SL 310SL HL 315SL 410L 710K
KUBOTA B26 L39 L45 M59
70 (52) 93 (69) 99 (74) 110 (82) 99 (74) 113 (84) 130 (97)
23.3 (17.4) 35.5 (26.5) 42.5 (31.7) 57 (42.5)
D NEW HOLLAN(72 ) B95C B95C TC B95C LR B110C
TEREX TX760B TLB840R
Loader Breakout Force lbs. (kg)
97 97 (72) 97 (72) 110 (82)
86 (64.3) 74 (55)
6,833 (3,099) 6,833 (3,099) 7,632 (3,462) 7,489 (3,397) 7,440 (3,375) 7,149 (3,243) 9,277 (4,212)
1,301 (590) 2,767 (1,255) 2,848 (1,292) 3,960 (1,796)
7,996 (3627) 6,200 (2812) 7,996 (3627) 7,996 (3627)
7,604 (3,449) 7,291 (3,307)
Backhoe Loading Height ft. (m)
11,375 (5,160) 12,281 (5,571) 12,281 (5,571) 11,283 (5,118) 11,575 (5,250) 11,283 (5,118) 11,484 (5,209)
9,353 (4242) 9,353 (4242) 11,045 (5010) 11,106 (5038) 10,866 (4929) 10,634 (4824) 15,540 (7,049)
2,343 (1,062) 4,605 (2,088) 4,531 (2,055) 5,992 (2,717)
10,294 (4,669) 8,182 (3,711) 10,294 (4,669) 10,294 (4,669)
10,485 (4,756) 9,441 (4,282)
14.6 (4.5) 11.9 (3.6) 11.9 (3.6) 11.9 (3.6) 11.9 (3.6) 13.0 (4) 13.0 (4)
11.2 (3.41) 11.2 (3.41) 11.3 (3.43) n/a 11.7 (3.57) 13.1 (3.98) 14.2 (4.34)
Max Digging Depth ft. (m)
17.3 (5.2) 14.3 (4.4) 14.3 (4.4) 14.3 (4.4) 14.3 (4.4) 15.3 (4.7) 15.3 (4.7)
14.0 (4.27) 14.0 (4.27) 14.2 (4.34) 14.8-18.1 (4.51-5.52) 13.7 (4.17) 15.8 (4.83) 17.8 (5.44)
6.4 (1.9) 7.6 (2.3) 7.6 (2.3) 8.8 (2.9)
8.3 (2.5) 10 (3) 10 (3) 12 (3.6)
12.5 (3.67) 12.5 (3.67) 12.6 (3.85) 13 (3.96)
14.5 (4.42) 14.5 (4.42) 15.5 (4.72) 15.5 (4.72)
12.3 (3.74) 11.5 (3.5)
Operating Weight lbs. (kg)
Travel Speed 4th Gear Fwd MPH (kmh)
14.8 (4.5) 14.8 (4.5)
25 (40) 23 (37) 25 (40) 25 (40) 25 (40) 26 (42) 26 (42)
24,141 (10,950) 15,207 (6,898) 15,207 (6,898) 17,033 (7,726) 17,732 (8,043) 18,364 (8,330) 19,063 (8,647)
18.6 (29.9) 20.6 (33.1) 25.0 (40.0) 25.0 (40.0) n/a 20.4 (32.8) 21.8 (35.2)
11.1 (17.8) 14.3 (23.0) 14.0 (22.5) 15.5 (24.9)
22 (35.4) 22 (35.4) 22 (35.4) 23 (37)
22.9 (36.9) 24 (38)
14,800 (6,713) 15,039 (6.822) 16,549 (7,507) 18,473 (8,379) 18,039 (8,072) 18,028 (8,178) 23,802 (10,796)
4,001 (1,815) 6,987 (3,170) 7,173 (3,254) 8,345 (3,785)
16,008 (7,261) 18,135 (8,226) 16,316 (7,400) 16,316 (7,400)
15,151 (6,887) 16,788 (7,615)
Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 12, 2015 • Page 79
Take advantage of Allied’s
“Money does grow on trees” sales promotion that’s full of special Factory Authorized Retail Sales Prices. Allied’s business partner has authorized some amazing retail prices (see chart) for End-Users on selected hammer models. These models include Allied’s Small Range Hammers (Model 555, Model 777 and Model 999) and the ever popular Compact Range Model 522 with the unbreakable trapezoidal tool. These prices are not the only amazing part of this great “Money does grow on trees” offer. With each purchase, End-Users will receive a demolition tool, standard hydraulic hoses, Free Mounting Bracket and Free Freight*. Delivery is to be arranged with your local Allied Distributor and 0% retail financing for 12 months is available. These special Factory Authorized Retail Prices will be offered through Thursday, December 31, 2015 or while supplies last. Visit an Allied Distributor location nearest you to select a quality product from Allied’s “Money Tree” for your job site demolition needs. *For Alaska and Hawaii purchases, there will be additional freight charges.
Model Number
Retail Price
Model 555
$9,500.00 US**
Model 777
$13,500.00 US**
Model 999
$17,500.00 US**
Model 522
$9,500.00 US**
**Plus applicable sales tax
©2015 Allied Construction Products, LLC
Page 80 • August 12, 2015 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide
Customer Input, New Models Highlight John Deere L-Series The John Deere L-Series backhoes build on the performance of its K-Series predecessors. The new series offers improvements on features that John Deere customers have come to know and trust, plus the addition of several new ones, to increase uptime, provide exceptional productivity and lower daily operating costs, according to the manufacturer. The L-Series lineup boasts six new models — the 310L EP, 310L, 310SL, 310SL HL, 315SL and 410L. Built in John Deere’s facility in Dubuque, Iowa, the L-Series backhoes are designed for a variety of jobs, including: loading trucks, placing pipe, digging trenches, moving materials or tearing up asphalt. The L-Series meets today’s emission regulations through a rugged Final Tier IV/ EU Stage IV PowerTech Plus diesel engine on the 310L (93 hp), 310SL (99 hp), 310SL HL (110 hp), 315SL (99 hp) and 410L (113 hp), and a certified IT4/ Stage III B John Deere PowerTech engine on the 310L EP (70 hp). The 310SL, 310SL HL, 315SL and 410L boast a five-speed PowerShift transmission for smooth on-the-go clutchless gear changes with speeds up to 25 mph (40 kmh). The autoshift option uses the fuel efficiency advantage of direct drive and lock-up torque convertor transmissions and automatically selects the best gear for a specific load. Owner and operator feedback is imperative to designing and building a new John Deere machine and the L-Series is no different. Tony Stephens, superintendent at Miller Pipeline, was one of the first John Deere customers to provide his input on this new generation of backhoes. “I’ve been a huge John Deere fan since I started running equipment over ten years ago, so the opportunity to provide feedback to get more of what I, and other operators, want out of their fleet was incredible,” said Stephens. “The way John Deere designed the Tier IV engine to fit under the hood is so much better now — it immensely increases our visibility.” The 310SL HL heavy-lift backhoe is a prime example of the customer feedback process. It’s a new addition to the John Deere lineup that boasts more craning capability at the push of a button. Along with the 410L, the 310SL HL can deliver up to 25 percent more backhoe-lift capacity under normal conditions than comparable K-Series models. Utilizing the sealed-switch module (SSM), operators can get an additional 10 to 15 percent boost through the new lift mode feature. Engine RPM is automatically set at 1,400 and the machine maximizes hydraulic pressure for increased craning capability. The addition of pressure-compensated loadsensing (PCLS) hydraulics allows for superb multifunction operation. The 310SL HL
The L-Series lineup boasts six new models — the 310L EP, 310L, 310SL, 310SL HL, 315SL and 410L. The L-Series backhoes are designed for a variety of jobs, including: loading trucks, placing pipe, digging trenches, moving materials or tearing up asphalt.
delivers all the advantages of PCLS hydraulics in the 14 to 15 ft. (4.2 to 4.6 m) digging-depth category, enabling operator efficiency and productivity through improved multifunction control. “The new HL feature is amazing,” said Stephens. “It’s going to be incredibly valuable for us and our business.” Operators will find comfort in the cab, which features extra legroom and a more comfortable seat, which leads to easier rotation between loader and backhoe operation. Redesigned pilot towers feature fingertip electrohydraulic (EH) controls to provide easier operation. A multifunction lever on the steering column controls turn signals, wipers, lights — just like that of a car or truck, allowing the operator to maintain line of sight to the front of the machine while operating in the loader position. A new “palm-on-top” loader-control grip enables control of clutch disconnect, quick shift, auxiliary proportional roller and momentary front-wheel drive. In addition, the L-Series boasts improved diagnostics with a multilanguage monitor. Operators can program a multitude of time-specific functions such as auto shutdown and auto idle. Other enhanced L-Series creature comforts include an efficient HVAC system, adjustable mechanical or air-suspension seat, lower and larger steps for easier entry and
egress, a new lighting scheme with optional LED lighting kit to enhance visibility and extend the workday and an elevated canopy for better visibility to both the front and rear of the backhoe. All backhoes also have the option to add premium radio with Bluetooth auxiliary input and XM Satellite Radio capability. An optional auto ride control field kit is based on an adjustable ground speed setting for the 310SL, 310SL HL, 315SL and 410L. It automatically engages or disengages the machine’s loader hydraulics to act as a shock absorber, creating a smoother ride for the operator and reducing spillage from the loader bucket. The John Deere L-Series backhoes come standard with economy mode, saving fuel in many applications. When activated, maximum engine RPM is limited in both loader and backhoe operations. A variable-speed electronically-controlled fan automatically speeds up or slows down, operating only as needed to keep things cool, helping conserve power and fuel while reducing noise. L-Series backhoes also boast the benefits of enhanced reliability and uptime. Sameside ground-level service points help speed daily checks. Other common sense features such as quick-change filters, extended service intervals, simple-to-read sight gauges and easy-access grease points help increase uptime and lower daily operating costs.
Additionally, stacked-assembly coolers are hinged and tilt away from the radiator for convenient core cleanout. “The backhoe is one of the most popular and versatile pieces of equipment on the job site and our customers are always looking for an advantage when completing the task at hand,” said Brian Hennings, product marketing manager, backhoes and tractor loaders, John Deere Construction and Forestry. “The L-Series gives them that advantage and more with added lift capability and PCLS hydraulics, as well as productivity boosting features and unmatched reliability and uptime. These are the most versatile John Deere backhoes ever.” Operators looking to get the most out of their L-Series can rely on Ultimate Uptime featuring John Deere WorkSight. With Ultimate Uptime, operators receive predelivery and follow-up inspections; three years of JDLink telematics, machine health prognostics and remote diagnostics and programming capability; and the ability to add additional dealer-provided uptime solutions to customize the package to individual needs. For more information, visit www.JohnDeere.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 12, 2015 • Page 81
Earthborne JCB 35 Easton Rd. Warrington, PA 18976 215/343-2000 w w w.earthborneinc.com
Walsh JCB 796 Unionville Rd. Prospect, PA 16052 724/865-9221 2350 Munster Rd. Lilly, PA 15946 814/886-5191 w w w.w alshequipmentjcb.com
Farm-Rite, Inc. 122 Old Cohansey Rd. Shiloh, NJ 08353 800/752-6373 3853 Middle Country Rd. Calverton, NY 11933 631/284-3127 w w w.farm-rite.com
MH JCB 126 Lakeview Dr. Charleston, WV 25313 304/776-6900 w w w.mhjcb.com
Liftech JCB 6847 Ellicott Dr. E. Syracuse, NY 13057 315/463-7333 4381 Walden Ave. Lancaster, NY 14086 716/684-9040
2820 Curry Rd. Schenectady, NY 12303 518/356-5932
Stephenson JCB 7201 Paxton St. Harrisburg, PA 17111 800/325-6455
Valley JCB 1109 Middle River Rd. Baltimore, MD 21237 800/633-5077
9 Belden Rd. Bloomfield, CT 860/243-9723
135 Lincoln Ave. Prospect Park, PA 19076 800/220-4033
20332 Leitersburg Pike Hagerstown, MD 21742 800/336-7414
241 Paul Rd. Rochester, NY 14624 585/328-6380
33B Commerce Ave. S. Burlington, VT 802/864-0308 www.liftechequipmentjcb.com
137 Armstrong Rd. Pittston, PA 18640 866/667-6756 w w w.stephenson equipmentjcb.com
2 8192 Euclid Court Manassas Park, VA 20111 800/300-5579 w w w.valleyjcb.com
8
2
Northland JCB 6 Jonspin Road Wilmington, MA 01887-1057 800/225-7956 978/658-5900 Fax: 978/658-8837 230 Cherry Street Shrewsbury, MA 01545 800/698-8517 508/842-3880 Fax: 508/842-4404
3 Chalet Rd. (Route 44) IN Middleboro, 47725 MA 800/489-8000 781/341-0321 Fax: 781/645-1315
KYRoad 42001 23 Foss Lewiston, ME 04240 800/640-6050 207/784-1501 Fax: 207/777-5503 KY 42240 44 Locke Road Concord, NH 03301 877/767-0655 603/717-0390 Fax: 603/717-7035
Edward Ehrbar, Inc. 4 Executive Plaza Yonkers, NY 10701 914/738-5100 Fax: 914/738-6847 42 Kenosia Ave Danbury, CT 06810 203/743-0088 601 Coates Avenue Holbrook, NY 11741 631/563-7600 w w w.ehrbar.com
A. Montano Company 571 Route 212 Saugerties, NY 12477 845/247-0206 w w w.amontanoco.com
Page 82 • August 12, 2015 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide
TLB840R Backhoe Loader Meets Rental Market’s Needs
This rental-ready backhoe loader comes standard with 4-wheel drive, tilt steering wheel, suspension seat and selectable pattern change pilot controls. It can be ordered with either a canopy or fully enclosed cab that includes heat and A/C, as well as a choice of a standard or extendable dipperstick.
Configured to meet the rental market’s need for a low acquisition cost, high-performance backhoe, the Terex TLB840R backhoe loader is designed to give rental business owners a more immediate return on investment without sacrificing performance and or quality. The TLB840R backhoe loader is equipped with a powerful 74hp, Tier IV final 4-cylinder Deutz electronic fuel injection diesel engine, a 4-speed synchro shuttle transmission and a robust hydraulic system to excel at digging, reaching, lifting and loading tasks. The engine, transmission, and hydraulic systems have all been designed for easy maintenance by rental company technicians and mechanics. “In the past when we’ve launched new products, they have been primarily designed with owner/operators and our distribution base in mind — we factored in features and benefits that we thought were important for rental, but with the
TLB840R we took a good hard look at the needs of our rental customers and configured this backhoe loader specifically for the market,” said Vice President and General Manager of Terex Construction Americas and Global Aftermarket, Gary Dennis. “With the growth forecast for the North American rental industry continuing to be encouraging well into 2017, we took the opportunity to poll our customers in the rental community to gain a better understanding of the market’s specific needs, and what we can do as Terex to help them be more competitive. Because rental rates are driven by equipment acquisition costs and utilization, we focused on a product that would be competitively priced without sacrificing quality and features our backhoe products are known for, at a price point that drives return on investment for our customers. “As we’ve worked to strategically align our company and our equipment to be
rental-ready, we identified that our current TLB840 backhoe loader is a great machine for owners/operators but wasn’t the right fit for the rental market. What the rental market really needed was a reliable unit, that’s cost-effective to maintain, with a competitive acquisition cost, easy to operate and delivers a superior return on invested capital to the rental houses. Within 12 months of identifying these needs, Terex is proud to introduce the TLB840R backhoe loader — a unit we have specifically designed and priced for the rental industry,” Dennis said. With a 9,441 lbf bucket breakout force, a loader lift capacity of 7,291 lbf and bucket capacity of 1.0 cu. yd. (.76 cu m), this new Terex backhoe loader offers high-capacity production to tackle any project a customer needs a backhoe for. Terex has designed this unit to give operators unrestricted visibility to the bucket edge, which is ideal in grading applications. The curved boom design and up to 13-ft. 5-in. (4 m) loading
height (with an extendable stick) of the new TLB840R backhoe loader offers operators excellent clearance to reach up and over obstacles, as well as and the ability to load closer into trucks for greater productivity, according to the manufacturer. This rental-ready backhoe loader comes standard with 4-wheel drive, tilt steering wheel, suspension seat and selectable pattern change pilot controls. It can be ordered with either a canopy or fully enclosed cab that includes heat and A/C, as well as a choice of a standard or extendable dipperstick. All Terex TLB840R backhoe loaders are equipped with a fully tilting hood for easy access to all service points, including the engine, oil cooler, radiator and air cleaner. For more information, visit www.terex.com/construction. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide Рђб Backhoes & Attachments Section Рђб www.constructionequipmentguide.com Рђб August 12, 2015 Рђб Page 83
WEРђЎVE GOT YOUR BACK(HOE). Whether you need a no-frills Рђюback-to-basicsРђЮ backhoe or a tool-carrier model loaded with industr y-exclusive TTo otal Machine Control (TMC) advantages, weРђЎve got a K-Series Backhoe IRU \RX &XVWRPHU LQVSLUHG HQKDQFHPHQWV LQFOXGH D IXHO HI кЪFLHQW (3$ ,QWHULP 7LHU ,7 (8 6WDJH ,,,% GLHVHO )LYH VSHHG WUDQVPLVVLRQ ZLWK $XWRVKLI W RSWLRQ &RPSOHWHO\ UHGHVLJQHG +9$& V\VWHP WKDW GUDPDWLFDOO\ LPSURYHV DLUкаRZ (FRQRP\ RSHUDWLQJ PRGH DXWR LGOH DQG DXWR VKXWGRZQ IRU PD[LPXP IXHO HI кЪFLHQF\ $QG D UHGHVLJQHG FRROLQJ V\VWHP IRU IDVWHU HDVLHU core clean-out. No matter what your needs, weРђЎve got your backhoe.
CONNECTICUT
MAINE
NEW JERSEY
NEW YORK
NEW YORK
The W.I. Clark Company Wallingford, CT 06492 203/265-6781 Brookfield, CT 06804 203/775-1203 Plainfield, CT 06374 860/546-4808 www.wiclark.com
Nortrax Hermon, ME 207-947-6786 Houlton, ME 207-532-6517 New Canada, ME 207-834-6701 Westbrook, ME 207-773-3777
Harter Equipment, Inc. Millstone Twp, NJ 08535 732/446-7600 1-888-HARTER-1
Five Star Equipment, Inc. Rochester, NY 14624 585/235-3011 Kirkwood, NY 13795 607/775-2006 Orchard Park, NY 14127 716/662-2191 6500 E Taft Road Syracuse, NY 13057 315/452-4560
Nortrax Plattsburgh, NY 518-561-7990 Clifton Park, NY 518-371-5111 Gouverneur, NY 315-287-0703
DELAWARE
Jesco, Inc. Middletown, DE 302/376-0784
MARYLAND
Jesco, Inc. Baltimore, MD 410/687-1700 Delmar, MD 410/546-1090 Frederick, MD 301/874-5500 White Plains, MD 301/870-1438
MASSACHUSETTS Schmidt Equipment, Inc. North Oxford, MA 01537 508/987-8786 North Billerica, MA 01862 978/667-4345 Plymouth, MA 02363 508/830-9997 No. Swansea, MA 02777 508/379-9810 Springfield, MA 01104 413/543-5595 www.schmidtequipment.com
Jesco, Inc. 118 St. Nicholas Ave. South Plainfield, NJ 07080 908/753-8080 800/241-7070 Fax: 908/753-7853 1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080 Fax: 973/575-5553 1790 Route 38 Lumberton, NJ 08048 609/267-2020 888/217-0600 Fax: 609/261-8559 www.jesco.us/
Jesco, Inc. 497 Fishkill Avenue Beacon, NY 12508 845/831-1800 800/724-0725 Fax: 908/821-1671 925-16 Lincoln Ave. Holbrook, NY 11741 631-256-6850
NEW HAMPSHIRE Nortrax Pembroke, NH 603-225-2769
VERMONT Nortrax Springfield, VT 802-885-6840 Williston, VT 802-658-2121 www.nortrax.com
PENNSYLVANIA Five Star Equipment, Inc. 711 Route 199 Athens, PA 18810 570/882-8800 1300 East Dunham Drive Dunmore, PA 18512 570/346-1701 46 Route 97 Waterford, PA 16441 814/796-2663 2585 Lycoming Creek Road Williamsport, PA 17701 570/494-4030 www.fivestarequipment.com
Plasterer Equipment Co., Inc. 2550 E. Cumberland St. Lebanon, PA 717/273-2616 800/225-4001 3215 State Rd. Sellersville, PA 215/258-5700 800/523-2209 400 Stoke Park Rd. Bethlehem, PA 610/867-4657 800/587-9790 640 Lowther Rd. Lewisberry, PA 717/938-6568 866/787-0001 www.plasterer.com
Page 84 • August 12, 2015 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide
New Holland C Series Offers Improved Engine Response New Holland Construction’s new C Series loader backhoes and tractor loader feature Tier IV Final emissions-compliant engines, improved engine response, fuel efficiency and serviceability, and an optional auto-ride control. The line-up includes the B95C, B95C TC, B95C LR and B110C loader backhoes and the U80C tractor loader. “These machines deliver the power and torque needed to get any digging, loading, trenching or pushing job done faster,” said Paul Wade, New Holland Construction marketing manager. “The new engines in these machines not only meet the strict Tier IV Final emissions standards, they improve fuel efficiency without compromising engine performance.”
Tier IVB Engines: Increased Performance Using Less Fuel C Series with Tier IV Final engines deliver the power and torque needed to dig, load, trench or push faster, while reducing the impact on the environment, according to the manufacturer. The new C Series loader backhoes and tractor loader feature Tier IVB emissions certified diesel engines, ranging from 97 gross hp (72 kW) to 110 gross hp (82 kW). The engines leverage SCR technology. SCR is a cool-running, quiet system that’s separate from the main engine function and does not compromise horsepower or torque. It does not
interfere with engine performance but, in fact, actually improves it. The SCR after-treatment requires an easy-to-use additive. Due to the SCR system, engines benefit from significantly better fuel economy and more power and torque. One of the principal benefits of SCR technology is that it does not place any additional demands on the cooling package, which means that zero power is diverted to cool the exhaust gas. Optional Auto Glide Ride Control The C Series feature an optional auto glide ride control. Previously reserved for wheel loaders, this feature makes operation easier by helping to reduce spillage even when operating at increased speeds, and allows the operator to set the engagement speed. When the operator is traveling at a slower speed, such as pushing into a soil pile, the ride control system automatically shuts off. Easy Serviceability The ease of serviceability on the New Holland C Series provides maximum uptime and profit. The tilt forward hood is easy to open, and provides wide access with low effort for routine maintenance needs. C Series Loader Backhoes: Long Reach, Tool Carrier Loader Backhoe Models The C Series loader backhoes continue the New Holland tradition of power, performance and serviceability. With backhoe bucket breakout forces of 12,933 lb. ft. (5,5740 kN) and lift capacities at 12 ft. (3.66 m) of 3,940 lb. (1,785 kg), New Holland C Series loader backhoes excel in tough conditions, making these machines ideal for job tasks such as digging trenches or placing pipe, according to the manufacturer. The C Series loader backhoes include the B95C LR (long reach) and B95C TC (tool carrier) models. The B95C LR combines the compact size of the B95C with the longer stick of the B110C and provides enhanced dig depth, reach and fuel consumption. Ideal for material handling use, the B95C TC delivers true self-leveling to the loader both up and down. A full range of attachments for the C Series loader backhoes is available from New Holland Construction, including augers, booms, forks, hydraulic hammers and rakes. An optional auxiliary hydraulic circuit can be used with a mechanical quick-attach system or an electro-hydraulic quick coupler for fast and easy hookup to many attachments. C Series Tractor Loader: Easy Self-Leveling and Loading The U80C tractor loader features automatic hydraulic self-leveling and its curved boom design places the bucket closer to the front of the machine allowing the operator to place loads exactly where desired. The reverse mounted boom cylinders enable maximum bucket breakout force and superior dump speed on the bucket. The rugged Category II 3-point hitch with adjustable sway control, controllable down pressure and optional dual tilt cylinders provides best-in-class scraping and leveling performance while the smooth synchromesh with power shuttle lets you make smooth direction changes between the four forward and four reverse gears. For more information, visit www.newholland.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 12, 2015 • Page 85
s 0OWERFUL 59 HP Kubota diesel engine (Interim Tier IV compliant) s 6ERSATILE Fully integrated front loader and backhoe with Quick Attach Coupler capability for maximum efficiency s 2ESPONSIVE HST Plus Transmission with Feather Step operation Abele Tractor & Equipment Co., Inc. www.abeletractor.com
Albany, NY 12205 518/438-4444
Admar Supply Company, Inc. Rochester, NY 14623 585/272-9390 Vestal, NY 13850 E. Syracuse, NY 13057 607/798-0333 315/433-5000 800/836-2367
www.admarsupply.com
Cherry Valley Tractor Buffalo, NY 14217 716/873-8000
www.cherryvalleytractor.com
Marlton, NJ 08053 856/983-0111
Cicero, NY 13039 315/433-5000
Erb & Henry Eagle Power & Equipment Company Equip., Inc. New Berlinville, PA 19545 610/367-2169 Montgomeryville, PA 18936 215/699-5871 Farm-Rite Inc. Eagle, PA 19480 Shiloh, NJ 08353 610/458-7054 800/752-6373 856/451-1368 East PBE, Inc. Calverton, NY 11933 Newington, CT 06111 631/284-3127 860/665-7470
www.EaglePE.com
F&W Equipment www.fwequip.com
Orange, CT 06477 203/795-0591 Harter Equipment, Inc Millstone Twp, NJ 08535 732/446-7600 1-888-HARTER-1
Marshall Machinery, Inc. Honesdale, PA 18431 570/729-7117 Pine Bush Equipment Co, Inc. www.pbeinc.com
Pine Bush, NY 12566 845/744-2006 Holmes, NY 12531 845/878-4004
Construction Equipment from the Ground Up. www.kubota.com ©Kubota Tractor Corporation, 2008
Westchester Tractor Inc.
ABLE Equipment Rental
www.wtractor.com
www.ableequipment.com
Brewster, NY 10509 845/278-7766 Fax: 845/278-4431
Deer Park, NY 11729 866/468-2666 631/841-3333
Chappell Tractor Sales www.chappelltractor.com
454 Route 13 South P.O. Box 424 Milford, NH 03055 603/673-2640 Fax: 603/672-0019
Page 86 • August 12, 2015 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide
Tier IV Final, Increased Automation for JCB Backhoes JCB has introduced Tier IV Final engines and a high degree of machine automation for its 2015 model line-up. Through development of its own range of Ecomax diesel engines, JCB has achieved the Tier IVF emissions standard without the need for a bulky diesel particulate filter (DPF), reducing cost and complexity for the customer, according to the manufacturer. A Machine for Every Job Site Both the rental-market 3CX, now built in the USA at JCB’s Savannah, Ga., plant, and the popular 3CX-14 model are powered by a 74 hp version of the JCB Ecomax diesel engine. With no change required from the TIVi model, this engine has no DPF or exhaust after-treatment, cutting maintenance costs. For the first time, the 3CX-14 is to be offered with the option of a powershift transmission and JCB’s advanced easy control (AEC) servo levers. Customers also can specify an air suspended operator’s seat as an option, though this is standard with AEC. The 3CX Super is offered with a TIVF Ecomax engine rated at 91 hp or an optional 109 hp engine, while the range-topping 4CX Super comes standard with the 109 hp engine. Both of these highly-efficient motors use selective catalytic reduction (SCR), with a diesel exhaust fluid (DEF) additive to meet the Tier IV Final emissions standards, reducing harmful oxides of nitrogen (NOx) by 90 percent. The SCR unit looks similar to a standard exhaust and the DEF is stored in a separate 5 gal. (19 L) tank on the opposite side of the machine to the diesel tank, to prevent contamination. DEF is injected into the exhaust stream before the SCR catalyst. As the DEF reacts with the exhaust gases it is converted into ammonia and water, with the ammonia entering the catalyst and reacting with NOx molecules to form harmless nitrogen and water. DEF usage is less than 3 percent compared to the diesel, so the DEF tank will only have to be topped off once for up to 10 tanks of fuel, minimizing downtime. The Tier IVF engines also can use the same 15W40 API CJ-4 engine oil as the previous models, while the engines now come with a yellow engine oil filler cap, a more powerful 150A alternator and a relocated water/fuel separator. The 3CX Super model benefits from standard front impact protection bumper bars, reducing damage to trucks and protecting the machine’s hood, front grille and counter-
Through development of its own range of Ecomax diesel engines, JCB has achieved the Tier IVF emissions standard without the need for a bulky diesel particulate filter (DPF), reducing cost and complexity.
“All eight automation functions have been designed to reduce operator fatigue, minimize downtime and boost machine productivity…” Tim Burnhope JCB
weight when loading. Both the 3CX Super and 4CX Super models also come with a standard 11,000 lb. (4,989 kg) lifting eye on the backhoe. Integral to the tipping link and for maximum strength, the lifting eye offers excellent lift capacity, according to the manufacturer. Automation Boosts Productivity The real benefits for 2015 backhoe customers come with the addition of automation features that now come as standard on all
3CX Super and 4CX Super backhoes. A total of eight automation features include the auto smoothride system (SRS) which is now a set and forget system that once activated requires no further operator input. Activation and deactivation of the loader arm suspension system is automatically controlled at a pre-set speed, providing the operator with improved ride comfort and load retention, boosting productivity and reducing operator fatigue. Auto Boomlock is standard on servo
models, automatically locking the backhoe in any slew position, without the need for any cable release mechanism. The boom is automatically unlocked with servo activation. Auto Up stabilizers also come with the servo models, providing one-touch levers to raise the stabilizer legs. Engine rpm automatically rises during activation to further cycle times up or down. Additional systems include auto return to idle, auto drive, auto throttle, automatic daily checks and automatic engine and cab preheat. JCB Chief Innovation and Growth Officer Tim Burnhope said: “All eight automation functions have been designed to reduce operator fatigue, minimize downtime and boost machine productivity, putting clear space between the market-leading JCB backhoe loader range and competitive brands.” For more information, visit www.jcbna.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 12, 2015 • Page 87
Attachments can n make your machine moree valuable. Allied offers a wide assortment of attachments to fit all of your makes and models of excavator, loader/backhoe, mini-excavator, skid-steer or compact track loader machines. Allied has become attached to your machines. Allied’s construction and demolition attachments are productive and dependable. State-of-the-art technology.Full product line. Competitive price and performance. Allied offers innovative, problem-solving capabilities. Commitment to product availability. Superior product support. Strong Distributor network. Most of all Allied meets and exceeds customer performance expectations. To put a high performance Allied attachment on your machine, call us at 1-800-321-1046 or visit AlliedCP.com for the name of a Distributor nearest you. We’ve become attached to your machines.
© 2015 Allied Construction Products, LLC
953 Bethlehem Pike Montgomeryville, PA 18936 215/699-5871 New Castle, DE 302/652-3028 Uwchlan, PA 610/458-7054
121 Karner Road Albany, NY 12205-5501 518/456-1445 Fax: 518/456-8600
www.highway-equipment.com 22035 Perry Highway Zelienople, PA 16063 724/452-7800 5846 West Road & I-79 McKean, PA 16426 814/476-7755 Rt. 219 North Dubois, PA 15801 814/371-3600
www.tylerequipment.com 251 Shaker Rd. East Longmeadow, MA 01028 800/292-6351 1980 Berlin Turnpike Berlin, CT 06037 800/352-4473
www.traceyroad.com 6803 Manlius Center Road P.O. Box 489 East Syracuse, NY 13057 800/872-2390 1523 Route 11 North Kirkwood, NY 13795 800/370-9488
19598 Cady Road Exit 44-Watertown Center off Adams Center, NY 13606 888/335-0200 115 Railroad Ave. Albany, NY 12205 866/740-8853
Page 88 • August 12, 2015 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide
Case Introduces New Line of Tier IV Final Backhoe Loaders Case Construction Equipment other Case backhoe. Engine Eco introduces its line of Tier IV Final mode, standard (2WD) or speed backhoe loaders, including the new selectable automatic (4WD) ride 580N EP — a lower-horsepower control and comfort steer are availversion of the company’s popular able as options. 580N backhoe that maintains the same backhoe lift capacity and Case Options and breakout force with greater fuel Industry Exclusives Drive efficiency and a maintenance-free Performance/Value Tier IV Final solution. All Case N Each Case N Series Backhoe is Series backhoes come standard available with a series of options with SiteWatch telematics, and can that further extends the operating be outfitted with a variety of stancapacity and efficiency of the dards/options such as power lift, machine — many of which are ride control, comfort steer, proconexclusive to Case: trol, easy flex side lights and a • Power Lift allows contractors mechanical universal backhoe to increase hydraulic capacities of bucket coupler that allows contracthe boom, as well as bucket forces. tors to use attachments from comThis allows the operator to lift petitive machines on their Case more (as much as 8 percent) with a backhoe. Each machine also is smaller, more fuel-efficient available in the Case Extendahoe machine. It also lowers RPMs to configuration for extended digging provide more control of the load and reach capabilities. being lifted. All Case N Series backhoes fea• Speed selectable automatic ture the company’s over-center ride control automatically turns design, which transfers weight to The Case 580N EP is ideal for contractors just getting started and the rental market, with lower ride control on and off based on the front of the machine for smooth owning and operating costs and a maintenance-free Tier IV Final solution. vehicle speed. It also allows for roading and better traction, and full loader performance at lower allows the operator to dig closer to speeds when digging into the pile matic (4WD) ride control, comfort steer, without requiring the operator to turn ride the machine. N Series controls are simple, attachment flexibility. additional work lights and the mechanical control off. with adjustable pilot control towers, a conCase Continues SCR Leadership universal backhoe bucket coupler. trol pattern selector and adjustable wrist • Comfort steer allows operators to With Tier IV Final N Series • The 580 Super N: The 97-hp 580 Super maneuver quickly, even in confined areas, rests. Each N Series machine also comes Backhoes N features increased backhoe bucket break- by taking only 1.5 turns of the steering wheel standard with adjustable SmartClutch, All remaining Case N Series backhoes — out force (13,975 lbs.) and lift capacities to go from lock-to-lock (compared to three which lets operators customize the feel of forward-to-reverse transitions (smooth, the 580N, 580 Super N, 580 Super N wide (3,251 lbs.) over the 580N. This model turns on standard models). moderate or aggressive) to their preference. track and 590 Super N — feature new Fiat comes standard with ProControl, work • The industry’s only fully integrated All Case N Series backhoes feature the Powertrain (FPT) engines with selective cat- lights, the mechanical backhoe bucket cou- hydraulic quick coupler increases versatility SmartFit bucket tooth system, which fea- alytic reduction (SCR) technology to meet pler and a shaft guard on 4WD models. for customers who regularly change bucktures heavy-duty self-sharpening teeth and a Tier IV Final standards. The system does not Power lift, engine Eco mode, standard ets/attachments — all without leaving the hammerless fastener system for easy instal- include a DPF or any other components that (2WD) or speed selectable automatic (4WD) cab. require intensive/long-term maintenance or ride control, comfort steer and the mechanilation. • ProControl is a swing dampening sysregeneration. Operators who remember to cal universal backhoe bucket coupler are tem that eliminates rebound on the backhoe, top off the diesel exhaust fluid (DEF) tank available as options. The New Case 580N EP providing faster cycle times, less wear on • The 580 Super N wide track: With components, greater operator precision and The Case 580N EP is ideal for contractors when they refuel will notice no additional just getting started and the rental market, regular maintenance activities with the new larger tires and structural features borrowed less fatigue. with lower owning and operating costs and a solution. As an after-treatment system, SCR from the larger Case 590 Super N, the 97• Engine Eco mode encompasses a nummaintenance-free Tier IV Final solution. The represents a more efficient use of the back- hp 580 Super N wide track provides higher ber of features that includes ECO settings in 580N EP features Case’s particulate matter hoe’s fuel, as all fuel is put towards produc- bucket breakout forces (15,070 lbs.) and both loader and backhoe functions to procatalyst — a combination of a diesel oxida- tive effort instead of burning off accumulat- lifting capacities (3,761 lbs.) with standard vide 10 percent fuel savings with minimal tion catalyst (DOC) and a high-efficiency ed particulate in a DPF. It also helps lower power lift technology. The wide track loss in productivity. It also includes auto flow-through filter that requires no fluids operating temperatures compared to back- model also comes standard with a limited engine idle and auto shutdown. slip axle. Engine Eco mode, standard and no diesel particulate filter (DPF) mainte- hoes with a DPF. • Auto engine protection shutdown is a The Tier IV Final Case N Series includes (2WD) or speed selectable automatic separate option that will shut the engine nance/upkeep. At 74 horsepower — and • The 580N: The 580N also is designed to (4WD) ride control and comfort steer are down prior to any critical failures. with a backhoe bucket breakout force of 11,517 lbs., backhoe lift capacity of 2,858 provide low owning and operating costs available as options. • S-Type auto shifting transmission shifts • The 590 Super N: The 110 hp Case 590 gears automatically when the switch is lbs., and peak torque of 233 ft. lbs. — the while still delivering a strong platform for 580N EP provides ample power and per- contractors to customize as needed. Rated at Super N is the largest and most powerful turned on. formance while still keeping fuel, mainte- 90 hp with a backhoe bucket breakout force backhoe in the Case family. Standard power • Heated air-ride seat for optimal operator nance, and owning and operating costs low. of 11,517 lbs. and 2,858 lbs. of backhoe lift- lift technology raises bucket breakout force comfort, night and day. While the new model is designed to opti- ing capacity, the 580N comes standard with and lifting capacities to 15,853 lbs. and For more information, visit CaseCE.com. mize efficiency and power for price-con- ProControl and can be further expanded 4,175 lbs., respectively. It also features a (This story also can be found on scious buyers, it can be outfitted with a full with auxiliary hydraulics, Engine Eco mode, longer standard reach (19 ft. 7 in. [6 m]) and Construction Equipment Guide’s Web site at selection of options for greater machine and standard (2WD) or speed selectable auto- digging depth (15 ft. 6 in. [4.7 m]) than any www.constructionequipmentguide.com.)
Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 12, 2015 • Page 89
EAST PBE, INC. 283 Pane Road Newington, CT 06111 860/665-7470 Fax: 860/665-7478
PINE BUSH EQUIPMENT INC. www.pbeinc.com Pine Bush Office 97 Rt. 302 P.O. Box 106 Pine Bush, NY 12566 845/744-2006 Fax 845/744-2900 Holmes Office www.pbeinc.com 24 Sybil Court Holmes, NY 12531 845/878-4004 Fax 845/878-9626
EDWARD EHRBAR INC. www.ehrbar.com 4 Executive Plaza Yonkers, NY 914/738-5100 Fax: 914/738-6847 601 Coates Ave. Holbrook, NY 11741 631/563-7600 Fax: 631/218-1069 42 Kenosia Ave. Danbury, CT 203/743-0088
MIDLANTIC MACHINERY INC. 2240 Bethlehem Pike Hatfield, PA 19440 215/822-0145 Harrisburg, PA 717/652-3190 Wilkes-Barre, PA 570/824-9891 Baltimore, MD 410/247-2100
Frackville, PA 570/874-6140 28587 Sussex Highway Laurel, DE 19956 302/715-5382
PENN-JERSEY PENN-JERSEY 847 State Route 12 Frenchtown, NJ 08825 908/824-4200 1330 Hurfville Rd. Deptford, NJ 08096 856/227-6400
Page 90 • August 12, 2015 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide
UPCOMING SPECIAL SECTIONS ISSUE
18
Utility, Trenching Ad Closing Date Publishing Date
ISSUE
20
Off-Road Trucks Ad Closing Date Publishing Date
ISSUE
22 24 26
October 26, 2015 November 4, 2015
Trailers Ad Closing Date Publishing Date
ISSUE
September 28, 2015 October 7, 2015
Crawler Loaders, Dozers Ad Closing Date Publishing Date
ISSUE
August 31, 2015 September 9, 2015
November 20, 2015 December 2, 20155
Compact Equipment Ad Closing Date Publishing Date
December 18, 2015 December 30, 2015
Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 12, 2015 • Page 91
2.9 X STRONGER. UP TO 35% LIGHTER. 100% BETTER. o ox
TM
Excavator Buckets
STRENGTH & DURABILITY ALL IN ONE. YOU’RE GONNA DIG THIS. Introducing the PowerOx TM family of excavator buckets. These new buckets provide increased levels of performance through a combination of optimized design and stronger, lighter AR400 steel. Realize weight
savings up to 35% as compared to grade 50 steel while providing greater levels of durability and abrasion resistance over competitive products. Learn more by contacting your Paladin Sales professional today!
WWW.PALADINATTACHMENTS.COM WWW.PALADINATTACHMENTS.COM
0% FINANCING. ZERO DOWNSIDES
WORK FAST TER, WORK SMARTER
FROM TOUGH JOHN DEERE EQUIPMENT.
1-877-556-4384 HudsonRiverTractorCompany.com
L220
800.222.3373 80 0.222.3373 • www www.messicks.com .messicks.com
Page 92 • August 12, 2015 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide
F2 Series Backhoes Possess Tier IV Final Engines, Hydraulic Refinements The F2 Series Cat backhoe loaders includes the 416F2, 420F2, 430F2, and a model new to the range, the 415F2. The new F2 Series center-pivot models build on the solid performance, reliability and durability of their F Series predecessors with engines that meet Tier IV Final emissions standards, new operator’s station, and added features and options that further enhance performance and operator productivity. The 420F2 and 430F2 continue to be available with both single-tilt and integrated tool carrier (IT) front linkage, and fourwheel drive is standard for the 430F2 and available for other models. The 415F2 uses a Cat C3.4B engine, rated at 68 net hp (51 kW), and the 416F2, 420F2, and 430F2 use the Cat C4.4 ACERT engine, with net-horsepower ratings (SAE J1349) of 87, 93, and 108, respectively, (65, 69, and 80 kW). The 415F2 does not require diesel exhaust fluid, a convenience for buyers such as rental firms and governmental agencies. All of the new F2 Series models have an extremely powerful implement hydraulic system, which uses a loadsensing, variable-displacement piston pump that provides full lifting and digging forces at all engine speeds and matches hydraulic flow to work demands for highly efficient operation. Pilot-operated joystick controls with in-cab pattern changers are standard on the 420F2 and 430F2. These controls are optional on the 415F2 and 416F2, which come standard with mechanical controls. All new models also can be equipped with auxiliary hydraulics, including a third-function loader valve, six-function backhoe valve and related lines. 420F2 IT and 430F2 IT machines have a standard hydraulic loader quick coupler. New for the IT models are twist-to-connect hydraulic quick disconnect fittings that can be connected under pressure. All models feature redesigned hose routing for extendible sticks, adding to overall reliability and durability. Operator’s Station A newly designed operator’s station provides ample legroom for comfortably rotating the seat, and the air-suspension seat provides comfort when roading the machine. Available with a standard cab (415F2/416F2) or deluxe
The F2 Series Cat backhoe loaders includes the 416F2, 420F2, 430F2, and a model new to the range, the 415F2.
cab (420F2/430F2), the F2 Series ROPS/FOPS operator’s station has been modified to accommodate flat glass, which maintains visibility, and a new rear window design improves trench sight lines. An additional third step on the left side facilitates access to the operator’s station. In-cab sound levels have been reduced significantly, from 80 to 74 dB(A), and the new HVAC system now has a recirculation control for greater control of the in-cab environment. An added roof cap reduces heat infiltration, and is designed for added visibility with the higher lift heights of the F Series models. Visibility enhancements also include repositioning the exhaust stack to align with the cab structure for improved sight lines to the bucket corners. A new gauge cluster includes a large LCD screen, and a new pantograph windshield wiper increases coverage by more than 40 percent. Technical enhancements for the new operator’s station include an available keypad security system, hands-free communication system, and the satellite- and cellular-based Product Link systems. The optional security system is a self-contained immobilizer type that disables the engine, transmission, and hydraulic system until a valid pass-code is entered on the keypad. Additional design details include a
differential-lock control now positioned on the loader control, dual directional-shift controls for IT models (steering column and joystick controller), and larger fenders that keep the cab glass cleaner in muddy conditions. Single Tilt 420F2 and 430F2 machines now have single lever loader controls with an integral roller switch for auxiliary functions like M/P buckets. 420F2/430F2 Features New for the 420F2 and 430F2 is an available six-speed auto-shift transmission, which also is available with a lock-up torque converter for directdrive efficiency in 5th and 6th gears, providing a top speed of 25 mph (40 kmh) and optimum fuel economy. These models also feature a standard economy mode that adjusts engine speed and hydraulic-pump displacement for optimum performance and fuel efficiency. Other enhancements include variable speed steering, designed to provide quick steering response in tightcycle truck loading, and adjustable auxiliary-hydraulic flow for improved controllability of hydraulic work tools. For more information, visit www.cat.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 12, 2015 • Page 93
The “King” of
SEVERE DUTY
Every Attachment for Every Job & Every Budget
800-839-9981
Visit our website for more attachments!
www.nationalattachments.com
We have an Extensive Used Inventory!
78 CHART from page
Model
CASE 580N 580 Super N 580 Super N WT 590 Super N 580N EP
Loader SAE HP (kw) 83 (62) 95 (71) 95 (71) 108 (81) 68 (51)
JCB 3CX 3CX 14 3CX 14 Super 3CX 15 Super 3CX 17 Super 4CX 14 Super 4CX 15 Super 4CX 17 Super
Loader Loader rce Life Capacity Breakout Fo) lbs. (kg lbs. (kg) 6,803 (3,086) 7,044 (3,195) 8,425 (3,821) 8202 (3,720) 6503 (2,950)
6354 (2882) 7119 (3229) )/109 (81) 9231 (4188)
74 (55) 74 (55) 91 (68
109 (81) 109 (81) 109 (81) 109 (81) 109 (81)
10,225 (4,638) 10,225 (4,638) 10,225 (4,638) 10,225 (4,638) 10,225 (4,638)
Backhoe Loading Height ft. (m)
Max Digging Depth ft. (m)
Travel Speed 4th Gear Fwd MPH (kmh)
10,622 (4,818) 10,947 (4,965) 10,873 (4,932) 12,776 (5,795) 9607 (4,358)
11.9 (3.6) 12.1 (3.7) 12.0 (3.7) 13.1 (4) 11.7 (3.6)
14.9 (4.5) 14.6 (4.4) 14.6 (4.4) 15.6 (4.8) 15 (4.6)
24.6 (40) 24 (38.8) 24.1 (38.8) 25.2 (40.6) 21.3 (34)
13,600 (6,170) 14,398 (6,531) 14, 398 (6531)
11.2 (3.40)
14.6 (4.45) 14.6 (4.45)
22.8 (36.7) 22.8 (36.7) 22.8 (36.7) 22.8 (36.7)
14,498 (6,590) 14,498 (6,590) 13,728 (6227)
13 (3.96)
14.6 (4.45) 16.3 (4.95)
14.3 (4.39) 11.2 (3.40)
17'7" (5.36) 14.6 (4.45)
22.8 (36.7) 22.8 (36.7)
13,728 (6227) 13,728 (6227)
13 (3.96) 14.3 (4.39)
16.3 (4.95) 17.6 (5.36)
22.8 (36.7) 22.8 (36.7)
11.2 (3.40) 11.2 (3.40)
Operating Weight lbs. (kg) 16589 (7,525) 17269 (7,833) 20077 (9,107) 20532 (9,313) 15810 (7,171)
17,196 (7,800) 15,439 (7,005) 15,439 (7,005) 17,037 (7,730) 17,515 (7,947) 16,446 (7,462) 18,225 (8,267) 18,428 (8,359)
Page 94 • August 12, 2015 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide
U.S.-Built Rental Backhoe Offers Five-Year Warranty JCB’s entry-level 3CX, a 14 ft. (4.2 m) full size backhoe loader, is now being built at the firm’s U.S. headquarters in Savannah, Ga., allowing the company to react rapidly to North American customer demands. The U.S.-built machine boasts a class leading 13,063 lb. loader breakout force and 6,354 lb. ft. loader lift capacity to its full height. The excavator bucket has a 13,942 lb. breakout force. It is powered by a JCB Ecomax Tier IV Final engine delivering 74 hp. This highly efficient power plant has no requirement for a costly diesel particulate filter (DPF) or any form of exhaust after-treatment, reducing operating costs for customers and simplifying onsite operation. The JCB Ecomax engine has been designed to achieve Tier IVF emissions regulations through efficient combustion, the use of second-generation common rail fuel injection technology, cooled exhaust gas recirculation (EGR) and sophisticated electronic control. With a transmission and axles designed and built by JCB, the
The JCB Ecomax engine has been designed to achieve Tier IVF emissions regulations through efficient combustion, the use of second-generation common rail fuel injection technology, cooled exhaust gas recirculation (EGR) and sophisticated electronic control. 3CX benefits from total component integration, each part specifically designed for use in a backhoe loader. The JCB 3CX comes standard with daily fluid auto-checks and JCB Livelink telematics, allowing customers to monitor machine performance and maintenance needs. Owners are alerted via email or text message if the machine continues to operate with a fault alert. The 3CX is the only backhoe on the market to offer this exclusive feature, according to the manufacturer. Backed by a five-year warranty, the heavy-duty, rental-ready 3CX backhoe delivers best in class performance, comfort and durability, with the lowest running costs for
maximum return on investment. Backhoe durability has been enhanced with keyhole castings, relieving stress at the end of the boom ram by distributing ram forces through the core structure of the boom. The main chassis and rear frame form a fully welded unit to cope with some of the highest digging loads in the sector. The center-mount excavator design delivers increased stability and a larger working envelope. The extending dipper locking pin is located at the bottom of the dipper arm, making it easy-toaccess from ground level. All rams and hoses are concealed within the boom and dipper structure, for maximum component protection and improved visibility into the
trench. All exposed hoses on the excavator kingpost, are sheathed to protect the operator in the event of a hose burst. The 3CX boasts tough loader arms, with a formed and welded design that is sturdy and durable. A large torsion box is positioned close to the shovel at the base of the loader arms, ensuring maximum visibility for the operator while reducing lateral twist. It is the only backhoe loader in its class to offer a parallel lift loader as standard, ensuring maximum load retention with excellent visibility to the bucket edge, according to the manufacturer. This also provides increased control when used with pallet forks, improving productivity.
Likewise, a standard fit return-todig setting delivers efficient operation in repetitive loading tasks, allowing the operator to concentrate on maneuvering the machine as the bucket is lowered. Loader arm float makes grading and site clearance easy too, as the bucket follows the contours of the ground. With the widest operation station in its class the 3CX boasts an excellent view to the loader, due in part to a low engine cover, as there is no requirement for bulky aftertreatment or DPF installation. Automotive ergonomic styling ensures that the operator remains comfortable and fatigue-free throughout the workday, increasing productivity. Options include a climate controlled cab model, hammer pipework, extending dipper and loader pipework. For more information, visit www.jcbna.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 12, 2015 • Page 95
BINDER MACHINERY 2820 Hamilton Blvd. S. Plainfield, NJ 07080
908/561-9000 201 North Route 73 Winslow Township, NJ 08095
856/767-5900
CN WOOD CO., INC. 200 Merrimac Street Woburn, MA 01801
781/935-1919 Whately, MA
413/665-7009 Johnston, RI
401/942-9191 Avon, MA
508/584-8484
JORDAN EQUIPMENT CO. 18 Blackstrap Road Falmouth, ME 04105
207/797-2240 Fax: 207/878-3506 35 Daves Way Hermon, ME 04401
207/848-9036 744 Clough Mill Road Pembroke, NH 03275
603/228-3377 www.jordanequipment.com
© 2008 ESCO Corporation.
An ISO 9001-2008 Certified Company
0.2015
New from from ro the H&L L Tooth Comp mpany! #B23HL1 Patented Tool for ALL 230 Series Teeth Pin Caddy Holds a Complete Set of
FREE
Flexpins
Flexpin® Installation
Flexpin® Removal
#B23HL2
PATEN NTED! No Other Pin
Work k Saf ely! As s al ways, saf ety etty glasses and gloves are recommended.
Spiral Pin Removal
For a dealer near you, call 1 -800-HL TOOTH (1-800-4580 6684) or visit us at www ww.hltooth.com
Page 96 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
New Technology Keeps I-89 Project in Waterbury, Vt., Moving Smoothly
Pump & Power Equipment Corp. 8019 Dorsey Run Rd. Jessup, MD 20794 410-799-1800 Fax: 410-799-1804 www.pumpnpowerequip.com
Key Equipment Sales & Rentals, Inc. 2605 Reach Road Williamsport, PA 17701 570-323-7800 Fax: 570-323-7802 1799 Horseshoe Pike Honey Brook, PA 19344 610-942-0482 Fax: 610-942-9982 2750 Turnpike Industrial Blvd. Middletown, PA 17057 717-370-2039 Fax: 717-370-2084 www.KeyEquipmentInc.com
Ambrose Equipment Co. Vermont Agency of Transportation photo
The first part of the Waterbury construction project on Interstate 89 is complete.
The first part of the “It’s gone amazingly Waterbury construction smooth to tell you the truth project on Interstate 89 is even from three to six when complete. Official say new the traffic is blocked off there technology is helping to it’s gone quite nicely,” said keep the project moving Towne. along smoothly. So how did VTrans ensure “This is a big project for traffic flowed smoothly us,” said Chris Cole, VTrans throughout the project? Cole deputy secretary. said new technology is playSome might describe the ing a huge role. 11 million dollar rehabilitaWe’re also using a smart tion of three bridges on work zone which uses blueInterstate 89 in Waterbury as tooth signals to gauge how a massive project. fast traffic is moving through “Just another one of those the work zone so we can Vermont Agency of Transportation photo deficient bridges in Vermont Crews remove the bridge deck. alert drivers ahead of the that needed to be fixed, very work zone with message poor condition most of these boards of how long the wait bridges,” said Tom Mancini, project engineer. is getting through there.” said Cole. Construction began earlier this year. The first part of the It’s the first time the smart work zone has been used in project — the South bound bridge — was finished earlier Vermont. this week. “From our perspective, traffic has been flowing really “This is a complex project cause this is one of the most well,” said Cole. congested corridors on the Interstate,” said Cole “Couldn’t have gone much better,” said Towne. Congestion that some residents like Gale Towne thought The South bound bridge that is now complete was was going to get even worse because of the construction. actually finished a week ahead of schedule, the North Especially because a downtown round-about project was bound bridge is set to be complete in October, the final going on at the same time. part of the project, the North bound off ramp should be “I thought it was going to be a nightmare between three complete next year. and six to tell ya the truth,” said Towne. (This story also can be found on Construction The roundabout is now complete and Towne said he’s Equipment Guide’s Web site at www.constructionequipbeen pleasantly surprised. mentguide.com.)
1401 Hooksett Rd. Hooksett, NH 03106 603-644-8787 1 Madison Street Plainville, MA 02762 508-643-0044 www.ambroseequipment.com
Able Tool & Equipment 410 Burnham Street South Windsor, CT 06074 860-289-2020 www.abletool.net
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 97
Cap Rents Supply, LLC 18-25 43rd Street Astoria, NY 11105 718-932-4100 Fax: 718-932-8971 www.caprents.com
Capital Rentals Wacker Neuson Sales (Toll Free) 855-922-5376 Manassas, VA 703-368-6220 Sterling, VA 703-444-0040 Triangle, VA 703-221-4000 www.capitalrentals.com
Gamka Sales Co., Inc. 983 New Durham Rd. Edison, NJ 08817 888-248-1400 Fax: 732-248-1445 www.gamka.com
Iron Source Equipment 25113 Dupont Blvd. Georgetown, DE 19947 302-856-7545 Fax: 302-856-7546 www.ironsourcede.com 5722 N. Dupont Hwy. Smyrna, DE 19977 302-653-7562
Norris Sales Company, Inc. 1010 Conshohocken Rd. Conshohocken, PA 19428 610-279-5777 Fax: 610-279-7973 668 Berlin Cross Keys Road Sicklerville, NJ 08081 856-740-1400 www.NorrisSales.com
Central Equipment Company P.O. Box 261 45 Dempsey-Greaves Lane Stillwater, ME 04489 207-827-6193 Fax: 207-827-3774 54 Old Canal Way Gorham, ME www.centralequipmentco.com
Page 98 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 99
Harter Equipment, Inc.
A. Montano Company
Tracey Road Equipment
Highway Equipment Company
615 State Route 33 Millstone Twp., NJ 08535 732-446-7600
571 Route 212 Saugerties, NY 12477 845-247-0206
6803 Manlius Center Road • PO Box 489 • East Syracuse, NY 13057 315-437-1471 • 800-872-2390
22035 Perry Highway • Zelienople (Pittsburgh), PA 16063 724-452-7800
www.harterequipment.com
www.amontano.com
Kirkwood, NY 607-775-5010 • 800-370-9488
Henrietta, NY 585-334-5120 • 866-950-6210
McKean (Erie Area), PA 814-476-7755
Adams Center, NY 315-788-0200 • 888-335-0200
Albany, NY 518-438-1100 • 866-740-8853
Dubois, PA 814-371-3600
www.traceyroad.com
Highway Equipment Company of Ohio 1405 Timken Place SW Canton, OH 44706 330-915-8391
www.highway-equipment.com
Page 100 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
KDI Power Unit Represents Ready-to-Use Power Solution The KDI Power Unit range of engines developed by Kohler Engines for the power generation market represents a ready-touse, versatile, high-output solution for both end users and OEMs alike. Compact size, outstanding power density, low fuel consumption, noise and vibration, and excellent reliability are the distinctive characteristics of the Power Unit line of KDI Diesel engines, according to the manufacturer. Specifically developed by Kohler Engines for the power generation market, a new 3.4-L model was added to the range. KDI Power Unit is a “plug & play” solution which represents an effective answer for generator manufacturers looking for a complete high-performance drive system which can be easily implemented in their product range due to the availability of a package of standard components and accessories. The KDI Power Unit line boasts a compact size and a light weight, particularly advantageous characteristics at all times, from the manufacturing to the logistical stages, but above all during operation. Kohler Engines have engineered a complete, cutting-edge line for the low- and medium-power generator sector, covering a range of 20 to 60 KVA at 50 HZ (1,500 rpm) and 20 to 70 KVA at 60 HZ (1,800 rpm), respectively. The main feature of the new Power Unit range offered by Kohler Engines is the layout. The main advantage from an engineering point of view is the adoption of the direct mechanical injection system. This is true for both naturally aspirated and turbocharged engines and is in place of the traditional architecture, which used a pre-chamber. This is still a prevalent option in this market segmen, in particular for the lower power ratings. This choice, together with the four valves per cylinder, has not only allowed emissions legislation to be met, but also offers better, cleaner and more efficient combustion with lower fuel consumption, according to the manufacturer. The high power density, which can be reached using this architecture, allows KDI engines to obtain the same power outputs
Kohler Engines have engineered a complete, cutting-edge line for the lowand medium-power generator sector, covering a range of 20 to 60 KVA at 50 HZ (1,500 rpm) and 20 to 70 KVA at 60 HZ (1,800 rpm), respectively.
Kohler Engines have engineered a complete, cutting-edge line for the low-and medium-power generator sector…
while using smaller displacements than those which have been required to date. This allows: • End users to use machines with lower fuel consumption (up to 3 percent less than other direct injection engines), which are also more easily managed in mobile applications. • OEMs to obtain significant reductions in generator dimensions for the same power output, quantifiable as between 15 percent and 30 percent smaller than the typical dimensions (with important effects both on manufacturing and transport costs, as more
units can be transported in the same space). The more efficient combustion also decreases the heat released by the engine, meaning lower cooling requirements. This allows the radiator and fan size to be reduced permitting the engine to be installed in even smaller units. The special design used by the Kohler Engines Power Unit range, combined with innovations such as a more rigid engine block and optimized internal components, has also brought about significant reductions to operating noise. This is an important advantage for both manufacturers who can
limit the soundproofing materials used, helping further reduce dimensions, and for end users, who can count on quieter machines to be used in any condition. The ease of implementation of the Kohler Power Unit range of engines is further enhanced by the Plug & Play design, which takes form in the availability of a package of standard components and accessories. This has been specifically calibrated to provide a solution complete in every detail and ready for installation. The standard equipment includes: • Radiator • Cooling fan and protection grille • Radiator mounting brackets • Engine brackets • Air and fuel filters • Electric fuel pump For a range of engines designed for the power generation market, flexibility and versatility are the key factors. For this reason, the KDI family of engines has been developed in a differentiated manner by energy supply frequency and emissions standards in order to supply solutions to meet the requirements of all destination markets, but also with the addition of a series of optional extras and accessories, which will allow OEMs to develop generation systems for use in the most wide-ranging sectors of application. The reliability of engines, designed for a life-cycle of up to 10,000 hours and with operating intervals, which can reach 1,000 hours, make the Power Unit range of engines a high-performance and technologically advanced solution. This is achieved through high output and low running costs, characteristics that translate into clear operational advantages with the additional benefits of a service network available in every corner of the globe for the end user. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
www.ConstructionEquipmentGuide.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 101
CASE AUTHORIZED DEALERS DELAWARE
PENNSYLVANIA
Eagle Power & Equipment New Castle (302) 652-3028
A.R. Beatty Erie Youngsville
Folcomer Equipment Greenwood (302) 349-5760
MAINE
We raised the bar on peace of mind.
Beauregard Equipment Hermon (207) 848-2050 Scarborough (207) 885-0600
MARYLAND Folcomer Equipment Aberdeen (410) 575-6580 Baltimore (410) 247-7454 Upper Marlboro (301) 627-3938 Groff Tractor Frederick (301) 663-3185
MASSACHUSETTS Case of New England Shrewsbury (508) 845-4343 Woburn (781) 933-4217
NEW HAMPSHIRE Beauregard Equipment Concord (603) 225-6621 Townline Equipment Sales Plainfield (603) 675-6347
NEW JERSEY Groff Tractor Freehold (732) 780-4600 Totowa (973) 785-4900 Vineland (856) 697-1414 Powerco Clinton
FACTORY WA R R A N T Y
*
(908) 735-2149
NEW YORK Hoffman Equipment Bronx (718) 822-1180 Marlboro (845) 236-3000 Medford (631) 207-2900 Monroe Tractor Binghamton (607) 754-6570 Buffalo (716) 681-7100 Henrietta (585) 334-3867 Horseheads (607) 739-8741 Latham (518) 785-8013 North Syracuse (315) 452-0000
FOR A LIMITED TIME... Get 3-yrs/3000-hrs of hassle-free, complete factory protection with every fuel-efficient, high-performance Alpha Series skid steer and compact track loader. That’s an additional 24 months at no additional cost to you. Don’t wait. Offer ends September 30th.
CaseCE.com/3YearWarranty *The free 36 months or 3000 hours, whichever comes first, includes the manufacturer’s base warranty period, plus an additional two years of manufacturer’s warranty. Offer valid June 1, 2015 through September 30, 2015 on the following new CASE skid steer loader and compact track loader models: SR130, SR150, SR160, SR175, SR200, SR210, SR220, SR240, SR250, SR270, SV185, SV250, SV280, SV300, TR270, TR310, TR320, TR340 and TV380. The precise protection afforded is subject to the terms, conditions and exclusions of the plan as issued. Programs may be changed or cancelled without notice. ©2015 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates.
(814) 899-4294 (814) 563-4808
Eagle Power & Equipment Chester Springs (610) 458-7054 Montgomeryville (215) 699-5871 Groff Tractor Bellefonte Cranberry Twp Ebensburg Ephrata Mechanicsburg New Stanton
(814) 353-8400 (724) 898-1535 (814) 472-7300 (717) 738-0220 (717) 766-7671 (724) 755-0124
Medico Industries Stroud Twp (570) 420-0877 Wilkes-Barre (570) 825-7711 Powerco Allentown
(610) 395-3775
Warner Tractor Troy (570) 297-2141
VERMONT Beauregard Equipment Colchester (802) 893-1555
VIRGINIA Lawrence Equipment Ashland (804) 752-8333 Bridgewater (540) 515-9670 Cloverdale (540) 966-0151 Suffolk (757) 539-0248 Waynesboro (540) 942-2610
WEST VIRGINIA State Equipment Beaver (304) 252-5300 Cross Lanes (304) 776-4405 Parkersburg (304) 422-4093 Shinnston (304) 592-0491
Page 102 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Komatsu Introduces PC210LCi-10 During Demo Event KOMATSU from page 14
This machine offers Komatsu’s machine control and guidance system fully integrated. The exclusive control function
Jim McKeever (L) and Tom Shabela, both of Midlantic Machinery, eastern Pennsylvania’s Komatsu dealership, were gathering pertinent information to bring back to their customers.
lets the operator focus on moving materials efficiently with no concerns about digging too deep or damaging the targeted surface, according to the manufacturer. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Checking out the spacious cab, Rudy Baker, president of Kingston Equipment Rentals, Kingston, N.Y., is one of Pine Bush Equipment’s guests.
Ryan Hazelton (L) of Anderson Equipment reviews the functions of the display panel with Jamie Watkins of Jamco Excavators in South Hampton, N.H.
Atlas Copco Strikes Again With New Diamondback Drill Rig Drillers get the rig they need faster with the new Atlas Copco Diamondback drilling rig with optional sliding-angle mast and enhanced safety features. The rig’s bolt-on modular components — a new concept in rig design — shorten lead time while making it a truly multipurpose rig The modular design means Diamondback owners will be able to reconfigure their rig in response to changes in market opportunities without special kits, makeshift fabrications or having to purchase another rig, according to the manufacturer. Safety enhancements include features and options such as hands-free pipe handling and breakout, enlarged operator and helper stands, a table safety cage and catwalks that meet or exceed industry safety standards. Powered by the truck’s 600 hp engine, drilling operations of the Diamondback are PTO-driven, like the Atlas Copco T2W and Atlas Copco TH60. An optional deck engine module is available for those who prefer a separate engine for drilling operations. The first series of Diamondback rigs is being introduced in the 40,000-lbs. (18,143 kg) pullback class. Pulldown is rated at 30,000 lbs. (13,608 kg).
Future additions will range from 25,000 to 100,000 lb. (11,340 to 45,359 kg) rigs. The first production rig will hit the field this summer, with more coming out of the Atlas Copco facility in Garland, Texas, later this year. Modular Design Advantages Tom Moffitt, business development manager–deep hole drills of Atlas Copco Mining, Rock Excavation and Construction, said the Diamondback rig’s modular design significantly shortens lead time due to bolt-on components, which share universal mounting locations and connection points. “Factory slots won’t have to be limited to just a few rigs of select models with little commonality among their rig-specific parts,” Moffitt explained. “Drillers just have to choose their options. One configuration doesn’t necessarily take longer than another to build for them, so
wait time between order and delivery is less.” Customers specify air and mud package, rod carousel or box, automated rod handling systems (or none), rotary head type, spindle size, 34- or 38-ft. (10 or 11.6 m) tubular tower, and carrier-mounted or tower-mounted table. Only the tower-mounted-table configuration can be used for angle drilling, however. Two tables are available, offering either a 24-in. opening or 17-in. (61 or 43 cm) opening. Truck and Tower Named for an iconic symbol of the American Revolution, the Diamondback will be available globally. In the United States, the Diamondback is built on a 600 hp Peterbilt carrier. The Diamondback features a tubular tower similar to the Atlas Copco T2W. The
Powered by the truck’s 600 hp engine, drilling operations of the Diamondback are PTO-driven, like the Atlas Copco T2W and Atlas Copco TH60. An optional deck engine module is available for those who prefer a separate engine for drilling operations.
weight-to-strength ratio is superior to lattice towers, with an open design that leaves plenty of room at the deck to weld casing or work around pipe, according to the manufacturer. The driller’s console pivots for good visibility of any operation taking place, even with the head slid to the right side for running casing. The Atlas Copco Diamondback also offers many other options and upgrades, with the promise of more in the future. Alex Grant, product line manager of deep hole rigs within Atlas Copco Drilling Solutions, said the modular design of the Diamondback concept arose in response to recent, rapid market changes Atlas Copco saw customers experiencing. “We’ve all seen in recent years how contractors can find themselves suddenly needing to expand their drilling repertoire or even switching from one specialty to another. The Diamondback is the only rig on the market that allows owners to do that without intensive after-purchase modifications,” Grant said. For more information, call 800/732-6762 or visit www.atalscopco.us. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 103
RESPECTFULLY DISREGARDS CONVENTIONAL EXCAVATOR WISDOM. Plenty of people make compact excavators. But none can say they engineered the first mini-excavator, zero tail swing excavator, swing-boom excavator and rubber-tracked excavator. At Yanmar, we simply can’t stop innovating. That’s why our nine excavators – seven with true zero tail swing – are each purpose-built to overcome the most challenging conditions, work with unparalleled power and conserve fuel. So, if you just want to play around on your jobsite, go get any old excavator. BUT IF YOU’D RATHER RULE YOUR JOBSITE, GET A YANMAR. RuleTheJobsite.com
CHESAPEAKE SUPPLY & EQUIPMENT CO.
ASPHALT CARE EQUIPMENT & SUPPLIES
E.W. SLEEPER COMPANY, INC.
PITTSFIELD LAWN & TRACTOR
CONTRACTOR’S CONNECTION, LLC
8366 Washington Blvd. Savage, MD 20763 410/792-4750 800/483-0885 Fax: 410/792-2854
2765 Galloway Road Bensalem PA 19020 215/639-9800 1-800/223-1202 Fax: 215/639-9802 www.asphaltcare.com
391 Loudon Road Concord, NH 03302 603/225-3361 800/358-6007 Fax: 603/225-4918 www.ewsleeper.com
1548 W. Housatonic St. Pittsfield, MA 01201 413/443-2623 Fax: 413/499-0023 www.plt.com
850 Wilmington Ave. Washington, PA 15301 724/228-8865 www.contractorsconnection.biz
12915 South Dupont Highway Felton, DE 19943 302/284-1000 Fax: 302/284-2200 www.equipmentby chesapeake.com
© 2014 Yanmar Yanmar America Corp.
G&H EQUIPMENT
EQUIPMENT EAST, LLC
KNOX EQUIPMENT RENTALS, INC.
314 Old Maple Lane North Haven, CT 06473 203/239-3376 www.ghequip.com
61 Silva Lane Dracut, MA 01826 978/454-3320 Fax: 978/454-3325 www.equipmenteast.com
421 East Market St. West Chester, PA 19382 610/696-2996 www.knoxrentals.com
ROVENDALE AG & BARN EQUIPMENT 1300 Susquehanna Trail Watsontown, PA 17777 570/538-9564 34872 Route 6 Wysox, PA 18854 570/265-7200 www.rovendaleag.com
Page 104 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE โ ข www.constructionequipmentguide.com โ ข August 12, 2015 โ ข Page 105
THE W.I. CLARK COMPANY 30 Barnes Industrial Park Rd Wallingford, CT 06810 203/265-6781 Brookfield, CT 06804 203/775-1203
Plainfield, CT 06374 860/546-4808 SCHMIDT EQUIPMENT INC. 80 Southbridge Rd. North Oxford, MA 01537 508/987-8786 Billerica, MA 01862 978/667-4345 Plymouth, MA 02363 508/830-9997 No. Swansea, MA 02777 508/379-9810 Springfield, MA 01104 413/543-5595
JESCO 118 St. Nicholas Ave. South Plainfield, NJ 07080 908/753-8080 800/241-7070 Fairfield, NJ 07004 973/227-2221 800/321-8080
Lumberton, NJ 08048 609/267-2020 888/217-0600 Beacon, NY 12508 845/831-1800 800/724-0725
ELLIOTT & FRANTZ, INC. ELLIOTT & FRANTZ, INC.
At Hitachi, we donโ t get sidetracked building every kind of
6680 Allentown Blvd. Harrisburg, PA 17112 717/652-5430
12051 Tac Court Manassas, VA 20109 703/257-2381
10421 Guilford Road Jessup, MD 20794 301/725-7394
450 E. Church Road King of Prussia, PA 19406 610/279-5200
38420 Sussex Highway Delmar, DE 19940 302/846-3033
construction equipment. Instead, we focus on excavators and build them with our legacy of innovative technology and expertise. The UHVXOW" <RX JHW JUHDWHU HIรฐFLHQF\ UHOLDELOLW\ DQG GXUDELOLW\ WR JHW more value for your hard-earned dollar. Thatโ s the Power of Focus.
RUDD EQUIPMENT COMPANY 4344 Poplar Level RD Louisville, KY 40213 502/456-4050 Pittsburgh, PA 412/741-1731 Clearfield, PA 814/765-8500 Charleston, WV 304/755-7788
HitachiConstruction.com
Page 106 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Cat Compaction Control Reduces Risk of Rework CAT from page 24
This system uses an inertial sensor to provide extremely smooth surfaces without operator input to the grading lever. The operator can build flat or sloped surfaces, with inclines or declines, all from the factory dash display, without GPS or lasers. Simple surfaces can be built on the fly and the operator will be proud of how smooth that surface is, no matter his skill level, Jouben added. Cat CS56B Compactor With Machine Drive Power Cat compaction control is a measurement solution that allows the operator to determine when compaction The use of real-time GoPro cameras inside the has been achieved. Its use eliminates cabs provided an opportunity for attendees to Caterpillar’s Sam Meeker presented an overview of the technology before the guesswork, reduces the risk of rework see the technology from the operator’s point of machine demonstration portion of the event. and allows the operator to quickly view. move on to the next job. Cat compaction control is factory integrated with the machine, providing greater protection for components. Two separate compaction measurement technologies are available: compaction meter value (CMV) and machine drive power (MDP). The MDP option is an exclusive Caterpillar technology that indicates soil stiffness by measuring rolling resistance. MDP is more flexible than CMV because it can be used on all soil types, and because it measures shallower than CMV. It can function when the drum is static or vibrating, and it measures closer to the depth of the lifts of materials being placed, according to Jouben. “Most of our downtime on our technology-enabled equipment is from frayed cables, damaged sensors — all the external stuff on the machine. To basically put that into the machine, that’s what we’re looking for to keep us running,” said Sheamus Kelleher, Emerald Excavating. 140M3 Cat Grader With Cross Slope The Cat grade control cross slope is an optional fully-integrated, factory installed system that helps operators improve grading efficiency and more easily maintain accurate cross slopes. Three machine-mounted sensors calculate the crossslope of the blade in this Cat motorgrader. The system reduces manual operator inputs by as much as 50 percent, according to Jouben. Experienced operators can maintain peak efficiency levels throughout more of the work day, while less experienced operators can be more productive faster. The system is job-ready from day one, and scalable for the future with AccuGrade upgrade kits that provide additional 2D and/or 3D control. D6T XW With Cat Grade Control Using Integrated 3D GPS The D6T XW is a fuel-efficient, right-sized dozer that can fit the needs of companies large and not-so-large. Technology indicates machine orientation and tilt as well as grade, slope and angle. It senses and corrects load and slip, increasing productivity and minimizing track wear, as well as lowering fuel use. Two grade modes add versatility; choose full automated or bulk earthmoving when large cuts are needed to get to the finish grade indicated by GPS. No cables or masts facilitate transport, hidden antennas are protected. An AccuGrade ready option (ARO) is included when
Depending on the event, breakfast or dinner was offered to give customers a chance to network and catch up with each other.
Unveiled at the events, the D6T XW dozer with factoryinstalled GPS is the newest machine with Caterpillar Integrated Technology Systems.
A first time operator selected from the group demonstrates the ease of operation of the D5K2 dozer with slope assist.
blade mount GPS or robotics are desired. “Without the technology, you won’t get things done as fast and you’ll have to rely on other people, pay for those people and wait for them to show up, while this machine is
always ready to go,” said Thomas Calcagni, Calcagni Development. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 107
MIDLANTIC MACHINERY
2240 Bethlehem Pike Hatfield, PA 19440 215/822-0145 Harrisburg, PA • 717/652-3190 Baltimore, MD • 410/247-2100 Wilkes-Barre, PA • 570/824-9891 Frackville, PA • 570/874-6140 Laurel, DE • 302/715-5382 ANDERSON EQUIPMENT CO.
PENNSYLVANIA Pittsburgh, PA • 412/343-2300 Clarion, PA • 814/226-4100 Clearfield, PA • 814/765-5311 Somerset, PA • 814/443-2867 Cambridge Springs, PA • 814/398-8819 NEW YORK Buffalo, NY • 716/877-1992 Henrietta, NY • 585/334-6770 Syracuse, NY • 315/463-8673 Albany, NY • 518/785-4500 Watertown, NY • 315/788-5512 Endicott, NY • 607/748-3400 Olean, NY • 716/372-8822 NEW HAMPSHIRE Manchester, NH • 603/627-7696 MAINE Cumberland, ME • 207/829-5503 Bangor, ME • 207/942-0177 VERMONT East Montpelier, VT • 802/223-9689 EDWARD EHRBAR
www.ehrbar.com 4 Executive Plaza Yonkers, NY 10701 914/738-5100 Holbrook, NY • 631/563-7600 New York City, NY • 718/626-3331 42 Kenosia Ave. Danbury, CT 203/743-0088 BINDER MACHINERY CO.
MORE POWER WITH BETTER FUEL ECONOMY t IQ XJUI VQ UP CFUUFS GVFM DPOTVNQUJPO ® equipped for system monitoring t ,0.53"9 t ,PNBUTV "VUP *EMF 4IVUEPXO GFBUVSF t &OIBODFE XPSLJOH NPEFT
2820 Hamilton Blvd. South Plainfield, NJ 07080 908/561-9000 201 North Route 73 Winslow Township, NJ 08095 856/767-5900 C.N. WOOD CO, INC.
Avon, MA • 508/584-8484 Woburn, MA • 781/935-1919 Whately, MA • 413/665-7009 Johnston, RI • 401/942-9191 PINE BUSH EQUIPMENT, CO. INC.
Route 302, P.O. Box 106 Pine Bush, NY 12566 845/744-2006 Holmes, NY 12531 • 845/878-4004 EAST PBE, INC.
283 Pane Road Newington, CT 06111 860/665-7470 • Fax: 860/665-7478
MADE WITH PASSION AND PRIDE
Page 108 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
First Half of Project to Create 8,000 Construction Jobs LAGUARDIA from page 1
terminal and improve access and links public transportation. The Port Authority selected LaGuardia Gateway Partners to build the P3 last May. Biden, in a speech that he delivered about infrastructure last year, was critical of the current airport and stated that it was similar to airports that can be found in third world countries. While the existing runways will be retained, they will be expanded to ensure that the airplane traffic is more efficient. The key elements of the work are the complete rebuilding of the terminal and airport buildings and the establishment of a high-speed ferry and an AirTrain station that will be connected to the NYC subway system at Willets Point. Part of the work in the first half includes a new unified terminal structure. The second half of the project, on a parallel track with the Port Authority project, will see Delta Air Lines redevelop its terminals. According to the document put forward by the governor’s office, the new The design for the new airport — a single, unified terminal, was developed by the Governor’s Airport Master Plan Advisory Panel layout is designed to “reduce to meet the demands of the 21st century. LaGuardia’s current plague of aircraft allows for a more efficient circulation of aircraft and reduced ground congestion and gate delays, and set [the] stage for [a] project. The design for the new airport — a single, unified termi- taxi-in and taxi-out times, which will yield shorter and fewer world-class passenger experience.” Moreover, “the airport will be transformed into a single, nal, was developed by the Governor’s Airport Master Plan gate delays — a dramatic difference from today’s LaGuardia. In addition, this change will produce overall structurally unified main terminal with expanded transporta- Advisory Panel to meet the demands of the 21st century. The governor’s document explains the new design: reduction in carbon emissions from idling aircraft.” tion access, significantly increased taxiway space and best“LaGuardia’s current terminal layout, comprised of multiple, LaGuardia Gateway Partners (LGP) consists of firms with in-class passenger amenities.” The first half of the project is expected to created 8,000 fragmented terminals, will be replaced by one main, archi- extensive experience in airport terminal operations, design direct jobs and 10,000 indirect jobs. LaGuardia currently tecturally unified terminal. This will be accomplished by and finances and construction. The consortium includes: the contributes more than $16 billion in economic activity to the demolishing the existing Terminal B building, which is oper- Vantage Airport Group, which currently manages nine airregion annually, generating close to 121,000 total jobs and ated by the Port Authority, and replacing it with a larger ports across three continents and has transitioned 19 airports structure, located closer to the Grand Central Parkway, from public to private management; Skanska and Walsh $5.9 billion in annual wages. Approval for the start of construction is expected to be which will include new terminal space and a new Central Construction — a construction joint venture; and HOK and announced in early 2016, with the goal of completing most Arrivals and Departures Hall, and will link to Delta’s Parsons Brinckerhoff — a design joint venture. The investof the work by mid-2019 — opening it to passengers — and Terminals C and D. This represents the western half of the ment equity for the project is being assembled by Vantage, new structurally unified terminal.” Skanska and Meridiam — a global infrastructure investment having a final delivery date 18 months later. It also provides the basis of the second half of the work: fund. LGP is responsible for designing, building, financing, “The second half of the new unified terminal is expected to be redeveloped by Delta Air Lines,” states the document, “The eastern half of the new unified terminal will be con- operating and maintaining the new terminal as part of a 35“which has indicated strong support for the new vision, and structed on a parallel track by Delta Air Lines redeveloping year lease. The Governor’s advisory Panel made a number of other anticipates beginning the redevelopment of its terminals on its existing Terminals closer to the Grand Central Parkway a parallel track with the LaGuardia Gateway Partners project and connecting them to the new Central Arrivals and recommendations to complement the new facility, which Departures Hall. Delta Air Lines is strongly supportive of incorporates elements from all of the top submissions to the to complete the new unified airport.” Gov. Cuomo has no doubt that the construction schedules this plan, and will move forward with the Panel’s recom- Governor’s master plan design competition — Dattner mendations in parallel with the construction schedule for the Architects, PRESENT Architecture and SHoP Architects. can be met. PRESENT Architecture is keen on the project. “New York had an aggressive, can-do approach to big new space and Central Hall.” A key element of the design is to “utilize LaGuardia’s geo“Governor Cuomo’s initiative to transform LaGuardia infrastructure in the past, and today, we’re moving forward with that attitude once again,” he said. “We are transforming graphic footprint more efficiently, with the new terminal Airport into a unique and accessible transportation hub is key for the future of the New York metropolitan area,” states the LaGuardia into a globally-renowned, 21st century airport facility placed closer to the Grand Central Parkway. “The redesigned facility will also utilize an island-gate firm. that is worthy of the city and state of New York. It’s the perSHoP Architects is just as eager: “As Governor Cuomo fect metaphor for what we can achieve with the ambition and system,” states the document, “in which passengers access optimism and energy that made this the Empire State in the their gates via raised pedestrian bridges, high enough for air- has made clear, right now there is a once in a lifetime opporfirst place, and I want to thank our many partners for joining craft to taxi underneath, which connect back to the main ter- tunity to implement a comprehensive design that will make minal. LaGuardia Airport the truly world-class experience New us to build the airport that New York deserves.” “Together, the relocated terminals and island-gate system Yorkers and visitors deserve. [We’re] proud that our ideas for Ensuring that the airport continues to function during the construction is a priority for all the stakeholders in the will create nearly two miles of new taxiway space. This see LAGUARDIA page 112
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 109
DELAWARE Folcomer Equipment Corp. Greenwood 302.349.5760
MARYLAND Folcomer Equipment Corp. Aberdeen 410.575.6580 Baltimore 410.247.7454 Upper Marlboro 301.627.3938 Frederick 800.951.2550
MAINE MASSACHUSETTS NEW HAMPSHIRE TB Equipment & Rental Lorusso Heavy Chappell Tractor Sales Bangor Equipment, LLC www.chappelltractor.com 207.262.0014 160 Elm St. 454 Route 13 South P.O. Box 857 P.O. Box 424 Walpole, MA 02801 Milford, NH 03055 508.660.7600 603.673.2640 Fax 603.672.0019
NEW JERSEY Harter Equipment Inc. Millstone Twp. 732.446.7600
NEW YORK George & Swede Sales & Service Buffalo/Rochester 585.584.3425 A Montano Co., Inc. Saugerties 845.247.0206 All Island Equipment West Babylon 631.643.2605
Tracey Road Equipment, Inc. www.traceyroad.com East Syracuse 315.437.1471 800.872.2390 Adams Center 315.788.0200 888.335.0200 Kirkwood 607.775.5010 800.370.9488
PENNSYLVANIA Highway Equipment Company www.highway-equipment.com 22035 Perry Highway Zelienople, (Pittsburgh) PA 724.452.7800 5846 West Rd. & I-79 McKean (Erie Area), PA 16426 814.476.7755 Rt. 219 North Dubois, PA 15801 814.371.3600
Page 110 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
GET IT RIGHT THE FIRST TIME
EVERYTIME GAIN IMPROVED EFFICIENCY AND PRODUCTIVITY FROM YOUR CURRENT EQUIPMENT AND OPERATORS. Your Northeastern SITECH Dealer is your Authorized Trimble and AccuGrade Machine Control & Guidance provider. They are a one-stop technology solution provider for a contractor’s entire fleet of heavy equipment regardless of machine brand. These include 2D and 3D grade-control, paving control, site positioning, construction asset management and marine construction systems, as well as supporting infrastructure and data prep solutions.
SITECH Northeast
SITECH MetroNortheast SITECH Allegheny
SITECH Chesapeake
Your Construction Technology Provider
www.SITECH-LOCATOR.com
SITECH NOR NORTHEAST RTHEAST THEAS THEAST MA, ME, NH, VT T,, RI, RI Upstate NY 855-748-3244
SITECH CHESAPEAKE MD, DC, Southern DE, Northern V VA, A, WV Panhandle 410-227-7094
SITECH METRO NOR NORTHEAST, OR RTHEAST THEAST T, LLC CT T, Lower NY Y,, NJ, Northern N DE, Eastern P PA A 855-748-3241
SITECH ALLEGHENY NE, Central and Western rn P PA, A, Northern WV 855-417-0290
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 111
F&W EQUIPMENT www.fwequip.com 164 Boston Post Road Orange, CT 06477 203-795-0591
ADMAR SUPPLY www.admarsupply.com 800-836-2367 449 Commerce Rd. Vestal, NY 13850 607-798-0333 1394 Military Rd. Buffalo, NY 14217 716-873-8000 2390 Rochester Rd. Canandaigua, NY 14424 585-396-0031 1950 Brighton-Henrietta Town Line Rd. Rochester, NY 14623 585-272-9390
Worksite Workhorse: SVL90-2
6014 Drott Drive E. Syracuse, NY 13057 315-433-5000
Meet your next worksite workhorse – Kubota’s SVL90-2. When it comes to power
7800 Brewerton Rd. Cicero, NY 13039 315-433-5000
and productivity this compact track loader packs a punch. It features a 92 HP Kubota diesel engine, 6,742 lbs. lift capacity and a spacious cab area with full-suspension seat. Plus, since it’s all Kubota-built, the SVL90-2 not only works hard, it’s reliable too. Track one down at your local Kubota SVL dealership today.
CHAPPELL TRACTOR SALES www.chappelltractor.com 454 Route 13 South P.O. Box 424 Milford, NH 03055 603-673-2640 Fax: 603-672-0019
BYRD TRACTOR, INC. BYRD TRACTOR, INC. www.byrdtractorinc.com 7274 Centreville Rd. Manassas, VA 20111 703-361-2135 Fax: 703-361-4804
ERB & HENRY EQUIP. INC. www.erbhenry.com 22-26 Henry Ave. New Berlinville, PA 19545 610-367-2169
www.kubota.com Optional equipment may be shown. ©Kubota Tractor Corporation, 2013
HARTER EQUIPMENT, INC. 615 State Route 33 Millstone Twp, NJ 08535 732-446-7600 866-379-6326 Fax: 732-446-9255 ABLE Equipment Rental Kubota Sales & Rentals 1050 Grand Blvd. Deer Park, NY 11729 866-468-2666 631-841-3333 www.ableequipment.com
Page 112 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
LaGuardia Redesign to Focus on Transportation Efficiency LaGaurdia Not the Only Airport to Be Modernized
While the existing runways will be retained, they will be expanded to ensure that the airplane traffic is more efficient. LAGUARDIA from page 108
an integrated terminal could contribute to solving that urgent need at this essential gateway to the city and the state.” The Panel also recommended, with the backing of the Port Authority, that a master planner be hired by an RFP to be put forward within 60 days by the Port Authority to “help coordinate development of the remaining recommendations, under the oversight of a new committee of the Port Authority’s board of directors.” Via the governor’s 2015 Opportunity Agenda, it was proposed to create an AirTrain option that directly connects LaGuardia to the New York City subway and Long Island Rail Road at Mets-Willets Point Station. This, as mentioned earlier, is being pursued. The Panel also recommends that the airport once again be made accessible by ferry service is calling for “an enhanced road configuration to improve passenger access and reduce traffic on local streets in the airport’s vicinity, including the Grand Central Parkway.” The interior design of the new unified terminal is critical, and the emphasis is that it “be intuitive for passengers to easily navigate, and will facilitate efficient movement throughout the airport. A transit option to move passengers more quickly within the airport is recommended by the Panel, such as a tram or monorail, to be included as construction moves forward. This transit option would also better integrate the Marine Air Terminal [Terminal A] with the rest of the airport housed in the new unified terminal.” The design also calls for additional space for security a check-in which is expected to help diminish wait times for passengers as they pass through mandatory TSA screening. “The facility — both in its individual terminals and the central hall,” according to the Governor’s document, “will also be built with significant height and openness in order to allow for a superior passenger experience, clearer signage, greater use of natural light and overall aesthetic improvements. The central hall will also be designed with space for best-in-class
passenger amenities in retail, dining, and business and conference center capabilities, as well as the option to include a 200room boutique hotel option convenient for travelers.” It is clear that both halves of the LaGuardia project will create thousands of construction jobs via Skanska and Walsh and a host of subcontractors. Notes the document, “The Panel has recommended that the Port Authority will ensure that the project’s employment reflects a broad spectrum of the communities in the region, and should recognize Governor Cuomo’s goal of 30 percent MWBE participation. It will also build on the Port Authority’s longstanding commitment to supporting Airport Concession Disadvantaged Business Enterprises (ADCBE).” LaGuardia was impacted by Hurricane Sandy when nearly 100 million gallons of saltwater flooded the airport and shut it down for two days — this impacted 250,000 passengers and caused an economic loss to the region of nearly $108 million. “With this in mind, “ states the document, “the Panel recommends elevating critical infrastructure in order to keep the airport operational during a flood event and better prepare the airport for similar extreme weather events.” The LaGuardia redesign project is cognizant of the impact of the airport on neighboring communities in terms of the “significant” automobile traffic on local roads and the Grand Central Parkway from passengers who are either parking outside of the airport or from those waiting to pick up passengers from the airport as they arrive. “Under the new design plan,” states the document, “the Panel recommends increasing parking options on site and identifying a location for a cell phone waiting area in order to reduce congestion on local streets. Additionally, the Panel also recommends a new rental car facility be created to concentrate the ten car rental companies that currently serve LaGuardia from multiple dispersed locations, further reducing congestion.” (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG
While a major focus is being placed on the $4 billion demolition and rebuilding of New York City’s LaGuardia Airport, development also is being planned to “revolutionize and modernize” nearby airports — JFK, Republic and Stewart. JFK is one of the few international airports without an on-airport hotel, according to a document put forward by New York Gov. Mario Cuomo on LaGuardia, who announced, “ the construction of a new state-of-the-art hotel at JFK International Airport in the historic TWA Flight Center, which was designed by world-renowned architect Eero Saarinen.” The new LEED certified hotel will include 505 guestrooms, 40,000 sq. ft. (3,716 sq m) of conference, event and meeting space, and a 10,000-sq.-ft. (929 sq m) observation deck. The redevelopment of JFK’s TWA Flight Center Hotel is being undertaken by a publicprivate partnership between MCR Development, JetBlue and the Port Authority of New York and New Jersey. According to the documents, “the $265 million construction project, which is expected to break ground next year, will generate 3,700 jobs, and is expected to open in 2018.” The Governor also announced plans to develop a full master plan for future development at JFK airport and he has called on the Advisory Panel to report back in the next 12 months with recommendations for an implementable master plan for the development of a 21st century JFK. Within the next 60 days the Panel will work with the Port Authority to issue an RFP to retain a master planning firm to advise the Governor, the panel and the Port Authority on the future development of the airport, according to the documents. Empire State Development also issued new RFIs with a primary focus on enhancing the regional economic activity at both Republic Airport (East Farmingdale, Long Island) and Stewart International Airport (Newburgh, Orange County). “Specific sites have been identified for future development, and ESD will guide the development of these sites via a new real estate broker — Newmark Knight Grubb Frank,” states the document.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 113
Makes tough scalping jobs look easy
New Lokotrack® ST2.8™ mobile scalping screen The Lokotrack® ST2.8TM track-mounted scalping screen sets a new standard for transportability, capacity and accuracy in mobile scalping screens. It is the perfect choice for recycling applications and Lokotrack® multistage crushing processes, helping you transform even the toughest feed material into profit. Contact your local Metso distributor today. www.metso.com/lokotrack
MELLOTT COMPANY
MILTON CAT
H.O. PENN MACHINERY CO., INC.
FOLEY, INC.
CB CON-AGG
CB
Con-Agg
www.mellotts.com
www.miltoncat.com
www.hopenn.com
www.foleyinc.com
Aggregates, quarry, contractor & recycling customers in MD, VA, WV, DE, and NC. Aggregates and quarry customers in NJ and NY, excluding New York City and surrounding counties
Contractor and recycling customers in ME, RI, VT, NH, MA and state of NY , excluding New York City and surrounding counties
Contractor and recycling customers in lower thirteen counties of NY state, and in the state of CT
Contractor and recycling customers in state of NJ
100 Mellott Drive Warfordsburg, PA 17267 4501 Green Point Drive Greensboro, NC 27410
800-634-5634
100 Quarry Drive Milford, MA 01757 508-634-3400 14 Kendrick Road Wareham Industrial Park Wareham, MA 02571 508-291-1200
16 Pleasant Hill Road Scarborough, ME 04070 207-883-9586
122 Noxon Road Poughkeepsie, NY 12603 845-452-1200
79 Robertson Blvd. Brewer, ME 04412 207-989-1890
699 Brush Avenue Bronx, NY 10465 718-863-3800
84 Concord Street North Reading, MA 01864 978-276-2400 2158 Plainfield Pike Commerce Park W #10 Cranston, RI 02920 401-946-6350 Route 2, One Cat Lane Richmond, VT 05477 802-434-4228
500 Commerce Drive Clifton Park, NY 12065 518-877-8000
783 Bloomingburg Road Bloomingburg, NY 12721 845-733-6400
294 Ainsley Drive Syracuse, NY 13210 315-476-9981
660 Union Avenue Holtsville, NY 11742 631-758-7500
55 Industrial Park Drive Binghamton, NY 13904 607-772-6500
554 Maple Street Hopkinton, NH 03229 603-746-4611
4610 E. Saile Drive Batavia, NY 14020 585-815-6200
Exit 7 I-89 780 Route 103 East Warner, NH 03278 603-746-4671
225 Richard Street Newington, CT 06111 860-666-8401 Contact our Aggregate Specialists In CT call Scott Gilligan 860-461-6534 In NY state call Kevin Kretschmer 646-315-2284
855 Centennial Avenue Piscataway, NJ 08855 info@foleyinc.com 732-885-5555
www.cbconagg.com Aggregates, quarry, contractor and recycling customers in state of PA 5300 Paxton Street Harrisburg, PA 17111 717-564-2121
4565 William Penn Hwy. Murrysville, PA 724-327-1300
Old Town Rd & Rte. 879 Clearfield, PA 814-765-1611
168 Industrial Park Road Somerset, PA 814-445-7915
11 Progress Drive Cranberry Twp., PA 724-776-7660
2955 Stewart Drive State College, PA 814-237-8338
3950 Depot Road Erie, PA 814-898-3388
Rt. 54 & I 180 (Exit 5) Turboville, PA 570-538-2551
1500 S. Altamont Blvd. Frackville, PA 570-874-3560
Wilkes-Barre Twp. Blvd. Wilkes-Barre, PA 570-822-8141
Aggregates and quarry customers in CT, MA, ME, NH, RI, & VT
145 Rose St. Indiana, PA 724-463-8743
4326 Oregon Pike Lancaster, PA 717-859-4905
95 Kelley Ave. Fitchburg, MA 01420 800-245-5472 978-343-6353 info@whitneyandson.com
3105 Route 219 Lantz Corners, PA 814-778-5250 US Rt. 6 East Mansfield, PA 570-662-7171
309 Foothills Lane Mount Pleasant, PA 724-696-4080 590 Suscon Road Pittston, PA 570-883-1044
WHITNEY & SON, INC.
www.whitneyandson.com
Page 114 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Three Phases…
Nortrax Unveils New Strategy to Serve Customers
:KHUH :RXOG <RX *ULQG" Peterson customers operate their machines in the most demanding work sites in the world! When you are this far out, you need to know that you have the most reliable, toughest machine possible.
Alban Tractor Covering Maryland & Delaware (410) 686-7777
Cleveland Brothers
Just one look at a Peterson can show you why we build the most innovative grinders in the market. For thirty years, Peterson’s attention to detail and drive to build the highest quality, highest volume producing machines make a Peterson a sure investment. Want to see what a Peterson Horizontal Grinder can do? Give us a call at 800.269.6520 or visit us at www.petersoncorp.com.
Covering Pennsylvania & West Virginia (814) 237-5132 ext. 5101
Groff Tractor New Jersey, LLC Covering Southern New Jersey (877) 874-2624 www.grofftractor.com
Scan this QR code with your smartphone to learn more about Peterson (you can download a free reader from your phone's app store).
800-269-6520 • www.petersoncorp.com • PO BOX 40490 • Eugene, OR 97404
Nortrax announced a new technology strategy and positions to better serve its construction, forestry and mining customers who are faced with increasingly sophisticated machines, tighter profit margins and a growing reliance on technological expertise. Chris Holmes, Nortrax VP product support said, “In order to become even more efficient and effective in supporting our customers, we’ve recently revised our technology roadmap at Nortrax. We identified specific needs that our customers demand and have reshaped our strategy to support them.” Holmes explained there will be multiple components to the Nortrax plan which will be implemented in three phases. Phase one is the creation of the machine monitoring specialists (MMS) positions. Customers suggested this was an area that Nortrax could utilize to very positively impact their businesses. The MMS utilizes John Deere’s telematics system, JDLink, to remotely monitor and connect with machines that are often hundreds of miles away. The goal of the MMS is to reduce, or in some cases eliminate, downtime events. Phase two includes the product support technology representative (PSTR) positions. One of the cornerstones of the plan is to ensure highly trained technology specialists in the field can better support customers in this ever increasingly complex environment. It’s not enough for Nortrax to utilize these technologies internally, so the PSTR’s will be out in the field every day using technology tools to maximize customers’ efficiencies and minimize their downtime. The Nortrax PSTR’s will work directly with other specialized positions such as the MMS as well as the customers themselves to ensure advances in technologies bring concrete dividends to their organizations. Phase three is the creation of the customer support center. Nortrax has made substantial investments in IT infrastructure recently, and the customer support center will take full advantage of these technologies. Calls placed to a Nortrax branch with all phone lines full will now be directed to a customer support center staffed by certified parts advisors. These highly trained specialists will have up to the minute access to parts inventories and can provide customers with an immediate answer regarding parts availability. In addition, the customer support center will be staffed by MMS, as well, to provide machine monitoring and parts support, 24/7/365. “The three phases of our plan, MMS, PSTR and the customer support center, are foundational elements to our overall technology strategy,” added Holmes. “We’ve already begun finalizing phase two plans, and are excited to be the bridge between technological advances in our industry and our customers.” For more information, visit www.nortrax.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 115
EDWARD EHRBAR, INC. www.ehrbar.com 4 Executive Plaza Yonkers, NY 10701 914/738-5100 601 Coates Ave. Holbrook, NY 631/563-7600 42 Kenosia Ave. Danbury, CT 203/743-0088
MODERN GROUP LTD. www.moderngroup.com 75 New St. Edison, NJ 08837 732/738-9200 Sicklerville, NJ 856/753-8282 Hasbrouck Heights, NJ 201/288-1441 Bristol, PA 215/943-9100
ALL ISLAND EQUIPMENT www.allislandequipment.com 39 Jersey St. West Babylon, NY 11704 631/643-2605 Fax: 631/643-4060
TRACEY ROAD EQUIPMENT, INC. www.traceyroad.com Syracuse 6803 Manlius Center Road P.O. Box 489 East Syracuse, NY 13057 800/872-2390 Binghamton 1523 Route 11 North Kirkwood, NY 13795 800/370-9488 Watertown 19598 Cady Road Exit 44-Watertown Center Adams Center, NY 13606 888/335-0200 Albany 115 Railroad Ave. Albany, NY 12205 866/740-8853
JERSEY RENTS www.jerseyrents.com 252 Route 9 Bayville, NJ 08721 732/606-1002 Fax: 732/606-0640 2076 Richmond Terrace Staten Island, NY 10302 718/448-3002
Page 116 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
JESCO, INC. 118 St. Nicholas Ave. South Plainfield, NJ 08070 908/753-8080 1790 Route 38 Lumberton, NJ 609/267-2020 1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080 Fax: 973/575-5553 Middletown, DE 302/376-0784 Baltimore, MD 410/687-1700
Delmar, MD 410/546-1090 Frederick, MD 301/874-5500 White Plains, MD 301/870-1438 495 Fishkill Avenue Beacon, NY 12508 845/831-1800 800/724-0725 Fax: 908/821-1671 925-16 Lincoln Ave. Holbrook, NY 11741 631/256-6850
LESLIE EQUIPMENT COMPANY 6248 Webster Road Cowen, WV 26206 304/226-3299 www.lec1.com
284 Van Kirk Drive Fairmont, WV 26555 304/534-5454 Fax: 304/534-5888
136 Clifftop Drive Beaver, WV 25813 304/255-1525
8331 Meade Springer Rd. Ashland, KY 41101 606/928-3477 Fax: 606/928-6845
Rt. 33 West Norton, WV 26285 304/636-6421 19 Goff Crossing Drive Cross Lanes, WV 25313 304/204-1818 Fax: 304/204-1811
195 Industrial Park Drive Pikeville, KY 41501 606/432-0321 Fax: 606/432-5918 105 Tennis Center Drive Marietta, OH 45750 740/373-5255 Fax: 740/373-5570
MURPHY TRACTOR & EQUIPMENT CO. Sioux City, IA 800/352-4693
Kansas City, MO 888/306-3434
Omaha, NE 800/416-5095
Columbus, OH 800/222-2010
Waterloo, IA 800/772-2019
Springfield, MO 888/306-2656
Brunswick, OH 800/716-9796
Lima, OH 800/423-7445
Dodge City, KS 800/794-0172
Gering, NE 800/205-6784
Cambridge, OH 740/439-2747
Poland, OH 866/503-7259
Great Bend, KS 800/264-4056
Grand Island, NE 800/868-4017
Canton, OH 866/235-0438
Vandalia, OH 800/233-4228
Park City, KS 800/262-0139
Lincoln, NE 800/416-5518
Chillicothe, OH 740/663-5300
Cranberry Twp, PA 724/776-3636
Topeka, KS 800/279-6087
North Platte, NE 800/894-7060
Cincinnati, OH 800/844-3734
Delmont, PA 724/837-4500
Ulysses, KS 800/472-9238
THE W.I.CLARK COMPANY 30 Barnes Industrial Park Rd. Wallingford, CT 203/265-6781 www.wiclark.com Brookfield, CT 203/775-1203 Plainfield, CT 860/546-4808
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 117
ARTICULATED. HIGHLY MOBILE. LOAD CAPACITY 22.000 LB. LOW GROUND PRESSURE. 180º LOAD DUMPING. HIGH QUALITY.
Hydrema ydrema 912HM. O Off ff Road Road s superior. uperior. Talk T alk tto oY Your our loc local al de dealer aler or visit h hydrema.us ydrema.us
Pine Bush Bush E Equipment quipment C Co. o. Inc. Location: Location: NY Pine Bush Bush Equipment E quipmen Co. o. Inc. Tel: (84 5) 7 744 44 2 Tel: (845) 2006 006 t C Location: Location: NYcom www .pbeinc. www.pbeinc.com Tel: (84 5) 7 744 44 2 Tel: (845) 2006 006 www.pbeinc.com www.pbeinc.com
E ast PBE East L ocation: C T Location: CT E ast(860) PBE 665 East Tel: 665 7 470 Tel: 7470 L ocation: C Tcom Location: CT www .pbeind. www.pbeind.com 470 Tel: (860) 665 665 7 Tel: 7470 www.pbeind.com www.pbeind.com
Jesco Inc. Jesco Location: NJ, NJ, MD Location: MD,, DE Je o Inc.7 Jesco T el:sc(908) 53 8080 Tel: 753 NJ Location: Location: MD,, DE www .jescoNJ, .us, MD www.jesco.us T el: (908) 7 53 8080 Tel: 753 www .jesco.us www.jesco.us
ompany Ander son E quipment C Anderson Equipment Company A, NY Y,, NH, ME L ocation: W estern P Location: Western PA, NY, quipmen ompany Ander son343 E Anderson Equipment Company T el: (4 12) 2 300 t C Tel: (412) 2300 A,om NY Y,, NH, ME L ocation: estern P Location: Western PA, NY, www .anderW sonequip .c www.andersonequip.com T el: (4 12) 343 2 300 Tel: (412) 2300 www .andersonequip.com www.andersonequip.com
est Line E B quipment Best Equipment ocation: E astern P A L Location: Eastern PA Line 6 E est(800) B Best Equipment el: 7quipmen 92 378 t T Tel: 679 2378 ocation: E as.tcern A L Location: Eastern PA www .bestline om P www.bestline.com el: (800) 6 79 2 378 T Tel: 679 2378 www .bestline.com www.bestline.com
Page 118 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
A-1 Roofing and Construction Inc. Serves the Community of Newport, R.I. By Jay Adams CEG CORRESPONDENT
Many firsts have come to Sean Napolitano later in life — he is the first generation owner of his well-regarded roofing and construction business in Newport, R.I., first in one incarnation, and then another; he is the son of the mayor of Newport, Jeanne Marie Napolitano, who took over that prestigious office in January. He is now the owner of A-1 Roofing and Construction Inc. “When I was 8 to 10 years old, I was fascinated by construction. I was constantly taking things apart and trying to put them back together, and then I started to get good at it,” said Napolitano.
Napolitano’s charity work is selective and so is his demolition work occasionally, especially delicate adjustments when knocking down homes built around 1758 in this most historic of cities.
PENNSYLVANIA
EAGLE POWER & EQUIPMENT CORP. 953 Bethlehem Pike PO Box 425 Montgomeryville, 18936 215/699-5871 Uwchlan 610/458-7054
GROFF TRACTOR & EQUIPMENT INC Mechanicsburg 717/766-7671 Ephrata 717/738-0220 State College 814/353-8400 New Stanton 724/755-0124 Cranberry Township 724/898-1535 Ebensburg 814/472-7300
MEDICO INDUSTRIES, INC. 1500 Highway 315 • Wilkes-Barre 18702 800/633-0027 3647 Shafer’s School House Rd. Stroud Township 18360 570/420-0877 NEW JERSEY Napolitano’s Roper Whitney auto brake that fabricates and bends custom pieces of metal work.
Napolitano is now the owner of A-1 Roofing and Construction Inc.
“We have an arm of our business that builds single family homes. We also have an arm of our business that does commercial roofing,” said Napolitano. “We are heavy into sheet metal work. We have over $150,000 in mechanical equipment for fabrication of sheet metal for roofs, houses, buildings, boats, hotels. We have the ability to mass produce fabricated sheet metal.” His working fleet includes 11 trucks — vans, dump trucks, pick-up trucks, utility body trucks and the Equipter. “They are in awe to watch it,” said Napolitano. “It is a neat piece of equipment, the Equipter 4000. It’s a self-propelled buggy. You have a platform with joy sticks and you move it around. We’re the only roofing contractor in Rhode Island with one of these. It goes up hills. It brings a platform/containment box right to roof level.” Napolitano bought his Equipter when he attended the International
Roofing Expo in New Orleans in February. “I wanted to be forward thinking and push the envelope of our business, going into the 21st Century. This is the real McCoy. This is incredible. We have incredible cutting edge technology, literally, that nobody else has,” said Napolitano. He spent $35,000 to procure it but has no regrets as the machines literally give him an edge; like his Roper Whitney auto brake that fabricates and bends custom pieces of metal work. “We also have a mechanical shear, which is basically a giant guillotine for sheet metal. It’s awesome equipment. It’s downstairs,” Napolitano said of his garage. “Commercial roofs generally all need new metal edging on the perimeter. We used to outsource that metal and buy it from a fabricator. Now, we do it all in house,” Napolitano said.
In 2007, Napolitano owned a small home building enterprise called Napolitano Building Corp., with 4 to 6 employees. His construction world changed, as did many others, when the economy plummeted in 2008. “I went into a different focus due to the downturn in the economy. I thought, ‘What is recession-proof?’ Well, roofing is recession-proof and that was the building work I decided to lead with.” He formed A-1 to be a roofing company first, but it is much more than that. His company builds at least three single-family homes each year from the foundation up — digging the footprint, laying the foundation, building the structure, meticulously cutting the sheet metal for it, if need be and capping off its roof. A-1 does full service general contracting, excavation, site work and site set up for utilities.
see A-1 page 120
BINDER MACHINERY CO. 2820 Hamilton Blvd. • South Plainfield 07080 908/561-9000 201 North Route 73 • Winslow Township 08095 856/767-5900 NEW HAMPSHIRE
CHAPPELL TRACTOR SALES 454 Route 13 South Milford, 03055 603/673-2640 Fax 603/672-0019 www.chappelltractor.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 119
EXPERIENCE EX PERIENCE T THE HE D DIFFERENCE IFFERENCE Takeuchi offers Takeuchi offers the the m most ost iinnovative nnovative a and nd a advanced dvanced li line ne o off c compact ompac t e equipment q u i p m e nt o on n tthe he p planet. lanet. C Come ome a and nd ssee ee w what hat e everyone veryone e else lse iiss ttalking alking a about. bout. E Experience xperience T Ta Takeuchi akeuchi — Visit V isit your your local local dealer dealer today. today.
DELAWARE
MARYLAND
DELAWARE B F G U
NEW YORK
(800) 737-0049 (800) 218-9462 (800) 951-2550 (800) 756-9433
FOLCOMER EQUIPMENT CORP. 12420 Sussex Highway Greenwood, 19950 800/756-9433
B F G U
EAGLE POWER AND EQUIPMENT 2211 DuPont Highway (Rt.13) New Castle, 19720 302/652-3028
(800) 737-0049 (800) 218-9462 (800) 951-2550 (800) 756-9433 (800) CASE-580
FOLCOMER EQUIPMENT CORP 629 S. Phila. Blvd Aberdeen, 21001 410/575-6580 4 S
Upper Marlboro, 20772 301/627-3938 Baltimore, 21227 410/247-7454 Frederick, 21704 301/682-4441 ‘ 0 hours………………..…..$ S
ALL ISLAND EQUIPMENT 39 Jersey Street • West Babylon 11704 631/643-2605 • Fax 631/643-4060 www.allislandequipment.com
S
1
B
B
FIND F IND O OUT UT W WHAT H AT O OTHERS TH ERS K KNOW. N OW. V VISIT I S IT T TAKEUCHI-US.COM AKEUCHI - US .COM TO TO FIND F I N D THE T H E DEALER D E A L E R NEAREST N E A R E S T YOU. YO U .
Page 120 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
A-1 Roofing and Construction Builds at Least Three Homes Each Year A-1 from page 118
Major projects include the Long Wharf Mall in Newport; Garden City Shopping Center in Cranston, R.I.; all the roofing work on the Portsmouth R.I. Library; the Landings housing development in Middletown; the Knights of Columbus in Middletown; Newport Onshore Condominiums; and Fenner Hall in Newport. “These are all projects I am very proud of,” Napolitano said. “I had to evolve to stay in business. It was extremely difficult. The competition was fierce. But we have years of good reputation. We always do what’s best for the customer. We’re true to our word. There are times when people call me and want a new roof and I tell them, ‘You don’t need a new roof.’ I’ve done that 10 times at least. “I think this is a great business with a lot of opportunity,” Napolitano said. “My number one recommendation would be to always be painfully honest about assessment, price, everything. If it looks like a difficult project, I bring all the most difficult parts of that project up first,” said Napolitano. His company now employs 16 people, including his new wife who is the office administrator and IT director, and his brother Joe, one of his carpenters. Another family member is wellknown in the city. Sean is the son of Jeanne-Marie Napolitano, the twotime, current mayor of Newport. “I’m very proud of her. She got into politics after I got out of high school, as a longtime city councilor. She worked father in the insurance industry for my still doing that,” since 1970, and he’s said Napolitano. They get along extremely well, but there is one condition he has to follow, given their relationship. “I just have to be very careful when I do bid on municipal jobs. Everything has to be by the book,” he said. “It’s more of a liability than an asset.” is passionate about politics. I “She told her a couple of years ago that she should probably get out of it after she mayor. didn’t get selected She was the top vote getter for three or four years didn’t and they select her [to be mayor, a tradition for the top candidate] and she was so hurt I told her she should get out of it. Then, she persevered,” he said. Does he have future political ambi-
15 Katrina Road • Chelmsford, MA 01824 800-804-0775
tions? “I want that to be on the record and I say, ‘No comment.’ ” This does not mean he is not involved in public service, however. “I didn’t realize how much community service would help us,” he said. Napolitano serves on the board of Rebuilding Together in Newport, a charitable arm that rebuilds homes for two needy families every year for free,
mony with the existing house. It’s a 64 Cambridge Drive • Monroe, CT 06468 855-281-2211 very unique property. It’s the James www.chadwick-baross.com Brown House in the Point section of Newport,” said Napolitano. “I had to get historic approval to knock down a dilapidated two-story addition in the back. We had to do it by hand. We’re talking about sledge hammers, man power and saws-all. It probPO 12010 121 Karner Road • Albany, NY 12212 ably took us two-and-a-half times 518-456-1445 • Fax: 518-456-8600 longer to do it, than we usually do it. But it’s a neater, cleaner job,” Napolitano added. “We found a 6-inch, 29.5 pound cannon ball while we were excavating. Everybody is fascinated with this,” he 252 Atlantic City Blvd. • Bayville, NJ 08721 732-361-4487 • Fax: 732-606-0640 said pointing to the cast iron ball six 2076 Richmond Terrace • Staten Island, NY 10302 inches in diameter. “It’s unbelievable. I 718-448-3002 love it. It was under 12 inches of earth. www.jerseyrents.com We dug up the earth and we turned this thing up.” It is quite possible the cannon ball is from the Revolutionary War. Presently, it’s the most impressive paperweight in all of Newport. 454 Route 13 South • P.O. Box 424 • Milford, NH 03055 A-1 also finishes off modern proj603-673-2640 • Fax: 603-672-0019 ects like new roofs on the Bay Voyage www.chappelltractor.com Hotel, and sub-contractor for companies even outside of New England. “We do a lot of work for a lot of different GCs,” Napolitano said. “A ton of “We found a 6-inch, 29.5 pound general contractors ask us to do sheet 159 North Avenue • Skowhegan, ME 04976 cannon ball while we were excavat- metal work for them, etc. We’ve sub207-858-0051 • 1-888-875-3954 • Fax: 207-858-0052 contracted to Benchmark Construction ing,” said Sean Napolitano. www.heavymachinesinc.com based in Westbrook, Maine. They utilizing the hands, minds and tools of called me up to finish a job in North Washington Air dozens of volunteers, including Smithfield, R.I. It is unusual to work Napolitano. for a GC from other states, but we do Compressor Rental Co. “Then we do ‘No Roof Left that,” he said. 12529 Parklawn Dr. • Rockville, MD 20852 301-230-5800 • Fax: 301-230-5830 Behind.’ We give a new roof to one “We are ripping down a house in needy family each year. Last year, we Skillman, New Jersey,” said 1800 4th St. NE • Washington, DC 20002 up with Napolitano. “A client of mine who 202-635-1500 gave two. We partner GAF Materials in New Jersey, who supply lives on Indian Avenue in Middletown 4622 42nd Pl. • Hyattsville, MD 20781 the Napolitano said. materials,” “We [R.I.] asked me if I would be willing to 301-277-1300 7304 Grove Rd. • Frederick, MD 21701 are a Master Elite contractor, which go down and handle the whole deal 301-662-7711 means we are among the top two per- down in New Jersey, because he was 44180 Wade Dr. • Chantilly, VA 20152 cent of roofing companies nationwide comfortable with me. I interviewed 703-742-6200 [based on reputation].” three down there and I hired www.washair.com excavators His charity work is selective and so one. I went through the permitting is his demolition work occasionally, process. myself I had to familiarize Mid Country especially delicate adjustments when with that process down in Montgomery knocking down homes built around County, where Skillman is, and then I Machinery could proceed. I just like to expand my in this 1758 most historic of cities. “We have two houses that we are horizons way of 9206 and that’s a great Brewerton Rd. • Brewerton, NY 13029 in Newport now. One is a his 315-256-6253 building doing it.” www.midcountry.com toric renovation at 49 Second St. We For more information on A-1 are pouring a new foundation for a Roofing and Construction, visit garage and a new two-story addition in www.A1roofingcompany.com or call the back. We just received Historic 401/265-1019. District Commission approval, because (This story also can be found on the house is more than 200 years old. Construction Equipment Guide’s The new structure has to be in harmo- Web site at www.constructionequipny and the materials have to be in har- mentguide.com.) CEG
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 121
Link-Belt® Spin Ace® ([FDYDWRUV DUH SDFNHG ZLWK DOO WKH SRZHU SURGXFWLYLW\ DQG IXHO HI¿FLHQF\ \RX¶YH FRPH WR H[SHFW IURP XV DORQJ ZLWK D PLQLPXP VZLQJ UDGLXV GHVLJQ IRU EHWWHU PDQHXYHUDELOLW\ DW VLWHV ZKHUH ZRUN VSDFH LV DW D SUHPLXP 7KRXJKWIXO UHGHVLJQ RI FRXQWHUZHLJKWV DQG ERRP SODFHPHQW PDNHV WKHP LGHDO IRU UHVLGHQWLDO FRQVWUXFWLRQ XWLOLW\ ZRUN DQG VSHFLDOW\ WUHQFKLQJ MREV 5RRP\ UHGHVLJQHG FDE +LJK GH¿QLWLRQ IXOO FRORU Ǝ /(' PRQLWRU &RQYHQLHQW JURXQG OHYHO VHUYLFH DQG ÀXLG FKHFNV Extended service intervals 7LHU $ FHUWL¿HG ,VX]X HQJLQHV \HDU VXEVFULSWLRQ WR 5HPRWH&$5(™ WHOHPDWLFV $OO WKLV ZLWK WKH LQGXVWU\¶V EHVW VWDQGDUG ZDUUDQW\
Model #
Operating Wt.
Net hp @ rpm
Tail Swing
; 6SLQ $FH
OEV
KS # USP
ƍ Ǝ
; 6SLQ $FH
OEV
KS # USP
ƍ Ǝ
; 6SLQ $FH
OEV
KS # USP
ƍ Ǝ
; 6SLQ $FH
OEV
KS # USP
ƍ Ǝ
<RXU /LQN %HOW ([FDYDWRU GHDOHU KDV WKH ULJKW 6SLQ $FH IRU \RXU DSSOLFDWLRQ DORQJ ZLWK XQFRPSURPLVLQJ VHUYLFH DQG VXSSRUW WR NHHS WKHP SHUIRUPLQJ DW WKHLU EHVW
*75 X3 and 80 X3 engines are Final Tier 4
Page 122 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
North American Crane & Rigging Finds Lifting Solution The construction of a 180-unit apartment complex in Quincy, Mass., left little room for a crane on the job site, much less The six-story structure required the two cranes. The six-story structure lifting of several wall panels and other required the lifting of several wall panels construction materials, and needed the and other construction materials, and capabilities of two cranes. needed the capabilities of two cranes. The solution: two Igo T 130 self-erecting cranes that could fit into the site’s tight quarters with enough reach and capacity to complete the job. Providence, R.I., based North American Crane & Rigging handled the $34 million project’s lifting work. The company turned to Shawmut Equipment, which is based in Manchester, Conn., for a lifting solution that would include cranes with compact footprints, but still had the needed reach and capacity. “Since the construction company had very little space to work with, North American Crane & Rigging had a request for cranes that could be installed and perform well in very tight working quarters,” said Kevin O’Connell, vice president and sales representative at Shawmut. “The two Igo T 130s offered extremely compact footprints, the ability to manage the lifts via remote control, and more than enough reach and capacity for the job.” North American Crane & Rigging erected one of the Potain cranes adjacent to the job site, while the second was placed on an elevated concrete deck. A 275-ton (249 t) capacity Grove GMK5275 all-terrain crane, also owned by the company, and disassemble the cranes on the job helped unload and setup the Igo T 130s site with very little impact to local busiat the site. nesses and the community. The general In their transport configuration, the contractor expressed that it was very Igo T 130s travelled as a single trailer pleased with the cranes’ performance with an overall length of 56 ft. (17 m). and that it will use the cranes again in The convoy has a ground clearance of future developments in the region.” just 1 ft. (.3 m) for better access to The Igo T 130 cranes arrived to the working job sites. site in March. One of the cranes has “The cranes are even versatile when completed its work and the other will it comes to their own transportation,” remain on site for about two more said O’Connell . “They require less months. The completed six-story strucmanpower and fewer trucks when ture will a 180-space parking garage, fitcompared with other cranes in their ness center, theater and pool, among class. They’re definitely time and other features. money savers.” Shawmut Equipment, one of At the job site, the cranes lifted panManitowoc’s leading distributors in the elized wood-framed walls and other northeast, has served New England and materials weighing up to 2.2 tons (1.9 the Atlantic provinces of Canada since m) at heights up to 66 ft. (20.1 m) to R.I., based North American Crane & Rigging handled the $34 million project’s 1957, according to the company. The complete the apartment complex’s con- Providence, company, a third generation familylifting work. struction. With an 8.8-ton (7.9 t) capacowned business, has consistently ranked ity, the cranes had more than enough America for low-rise residential, hotel and a high-value real estate area such as Greater high in independent surveys ranking cuscapability to handle the lifts. other commercial construction. Boston during construction. tomer service and satisfaction. The wireless remote controls enabled the “Saving space and causing as little disFor more information, visit company to quickly complete lifts, with an Quality and Agility ruption as we can to a heavily urbanized www.manitowoccranes.com ideal line of sight for load placement. The on the Job Site area such as metro Boston meant significant (This story also can be found on efficiency displayed by both Igo T 130s To David White, business development cost savings for the general contractor, our Construction Equipment Guide’s Web exemplified why self-erecting cranes have manager at North American Crane & customer, and the city of Boston,” White site at www.constructionequipmentbecome extremely popular in North Rigging, every square foot saved matters in said. “We were able to quickly assemble guide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 123
Taking crushing to a whole new level
Lokotrack® LT106™ The Lokotrack LT106 jaw plant, featuring the proven Nordberg® C106 jaw crusher, is taking primary crushing to a whole new level. New features and an advanced process control system deliver superior productivity and efficiency. Safe and simple to operate, the LT106 provides contractors with a compact, highly mobile option to meet your production requirements. For more information, contact your local Metso distributor today. www.metso.com/lokotrack
MELLOTT COMPANY
MILTON CAT
H.O. PENN MACHINERY CO., INC.
FOLEY, INC.
CB CON-AGG
CB
Con-Agg
www.mellotts.com
www.miltoncat.com
www.hopenn.com
Aggregates, quarry, contractor & recycling customers in MD, VA, WV, DE, and NC. Aggregates and quarry customers in NJ and NY, excluding New York City and surrounding counties
Contractor and recycling customers in ME, RI, VT, NH, MA and state of NY , excluding New York City and surrounding counties
Contractor and recycling customers in lower thirteen counties of NY state, and in the state of CT
100 Mellott Drive Warfordsburg, PA 17267 4501 Green Point Drive Greensboro, NC 27410
800-634-5634
100 Quarry Drive Milford, MA 01757 508-634-3400 14 Kendrick Road Wareham Industrial Park Wareham, MA 02571 508-291-1200 84 Concord Street North Reading, MA 01864 978-276-2400 2158 Plainfield Pike Commerce Park W #10 Cranston, RI 02920 401-946-6350 Route 2, One Cat Lane Richmond, VT 05477 802-434-4228 554 Maple Street Hopkinton, NH 03229 603-746-4611 Exit 7 I-89 780 Route 103 East Warner, NH 03278 603-746-4671
16 Pleasant Hill Road Scarborough, ME 04070 207-883-9586
122 Noxon Road Poughkeepsie, NY 12603 845-452-1200
79 Robertson Blvd. Brewer, ME 04412 207-989-1890
699 Brush Avenue Bronx, NY 10465 718-863-3800
500 Commerce Drive Clifton Park, NY 12065 518-877-8000
783 Bloomingburg Road Bloomingburg, NY 12721 845-733-6400
294 Ainsley Drive Syracuse, NY 13210 315-476-9981
660 Union Avenue Holtsville, NY 11742 631-758-7500
55 Industrial Park Drive Binghamton, NY 13904 607-772-6500
225 Richard Street Newington, CT 06111 860-666-8401
4610 E. Saile Drive Batavia, NY 14020 585-815-6200
Contact our Aggregate Specialists In CT call Scott Gilligan 860-461-6534 In NY state call Kevin Kretschmer 646-315-2284
www.foleyinc.com
www.cbconagg.com
Headline esta lorem ipsum Contractor and recycling customers in state of NJ 855 Centennial Avenue Piscataway, NJ 08855 info@foleyinc.com 732-885-5555
WHITNEY & SON, INC.
www.whitneyandson.com Aggregates and quarry customers in CT, MA, ME, NH, RI, & VT
95 Kelley Ave. Fitchburg, MA 01420 800-245-5472 978-343-6353 info@whitneyandson.com
Aggregates, quarry, contractor and recycling customers in state of PA
5300 Paxton Street Harrisburg, PA 17111 717-564-2121
4565 William Penn Hwy. Murrysville, PA 724-327-1300
Old Town Rd & Rte. 879 Clearfield, PA 814-765-1611
168 Industrial Park Road Somerset, PA 814-445-7915
11 Progress Drive Cranberry Twp., PA 724-776-7660
2955 Stewart Drive State College, PA 814-237-8338
3950 Depot Road Erie, PA 814-898-3388
Rt. 54 & I 180 (Exit 5) Turboville, PA 570-538-2551
1500 S. Altamont Blvd. Frackville, PA 570-874-3560
Wilkes-Barre Twp. Blvd. Wilkes-Barre, PA 570-822-8141
145 Rose St. Indiana, PA 724-463-8743
4326 Oregon Pike Lancaster, PA 717-859-4905
3105 Route 219 Lantz Corners, PA 814-778-5250
309 Foothills Lane Mount Pleasant, PA 724-696-4080
US Rt. 6 East Mansfield, PA 570-662-7171
590 Suscon Road Pittston, PA 570-883-1044
Page 124 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
BusinessCalendar
To view our Business Calendar online, go to www.constructionequipmentguide.com.
Minnesota Nursery & Landscape Association (MNLA) Member Appreciation Social in St. Cloud – FREE! Date: Tuesday, August 11, 2015 Location: St. Cloud, Minnesota Time: From 5:00 PM to 8:00 PM FOR MORE INFORMATION ON THE ABOVE MNLA EVENTS, please contact MNLA at 651/633-4987/toll free: 888/886-6652. Fax: 651/633-4986/toll free fax: 888/266-4986. American Oil & Gas Events/Conferences 2015 Toll Free: 800/847-8301 or 316/788-6271 AUGUST, 2015 CALENDAR OF EVENTS: August 13: Western Energy Alliance Annual Meeting Park Hyatt Hotel, Beaver Creek, Colorado (303)623-0987 August 14: SOOGA Fall Golf Outing Oxbow Golf Course, Beverly, Ohio (740) 374-3203 August 24-27: Rocky Mountain Energy Summit Colorado Convention Center, Denver, COGA (303) 861-0362 August 25: Houston Wildcatters, Houston Petroleum Club Texas Alliance (940) 723-4131 August 25-26: Petroleum Association of Wyoming Annual Meeting Parkway Plaza Hotel & Convention Center, Casper (307) 234-5333 August 26: 18th Annual Divot Diggers Golf Outing Tam O’Shanter Golf Course, Hermitage, PA PIOGA (724) 933-7306 August 27: North Dakota Oil Pac Golf Tournament Bully Pulpit, Medora, N.D. NDPC (701) 223-6380 September 1: TAEP First Tommy Taylor Memorial Scholarship Clay Shoot Abilene, TX, CLAY SPORTS ( 325) 232-5106 September 9: IPAA/TIPRO Leaders in Industry Luncheon Petroleum Club of Houston, TX (832) 233-5502 September 9-11: Platts Fifth Annual NGLs Conference and Third Annual Petrochemical Seminar Royal Sonesta Hotel, Houston, TX (800) 752-8878 September 14: LOGA Industry Seminar and CLE JW Marriott, New Orleans, LA (800) 443-1433 September 15-16: Texas Alliance Abilene Membership Meeting Abilene, TX, Civic Center (940) 723-4131 September 15-17: Eastern Kansas Oil & Gas Association Annual Meeting Prairie Band Casino, Mayetta, KS (620) 431-1020 September 15-17: 19th Annual Wyoming Oil & Gas Fair Casper, WY, Events Center (307) 258-4708 September 15-17: 19th Annual Gas Compressor Short Course & Conference National Center for Employee Development Conference Center and Hotel, Norman, OK (405) 325-3891 September 16: IPAA Leaders in Industry Luncheon Dallas Petroleum Club (800) 433-2851 September 16-17: IADC Asset Integrity and Reliability Conference & Exhibition Norris Conference Center, Houston, TX (713) 292-1945 September 17: SOOGA Annual Trade Show Marietta, OH (740) 374-3203 September 17: PBPA Monthly Luncheon Midland Petroleum Club (432) 684-6345 September 20-22: 65th Annual Gulf Coast Association of Geological Societies and the Gulf Coast Section of SEPM Annual Convention George R. Brown Convention Center, Houston, TX (512) 471-0328 September 21-23: North Dakota Petroleum Council Annual Meeting Ramada Plaza Hotel and Conference Center, Fargo, ND (701) 2236380 September 21-24: American School of Gas Measurement Marriott Westchase Hotel, Houston, TX (877) 847-0889 September 24: KOGA’s West Kentucky Meeting Convention Center, Owensboro, KY (502) 226-1955 September 24-25: Fourth Annual Frac Sand Supply & Logistics Conference JW Marriott Hill Country Resort, San Antonio, TX (888) 906-9898 September 27-30: IOGAWV Sports Weekend Lakeview Resort, Morgantown, WV (304) 344-9867 September 28-30: Society of Petroleum Engineers Annual Technical Conference & Exhibition George R. Brown Convention Center, Houston, TX (972) 952-9393 September 28-29: Platts 10th Annual Pipeline Development and Expansion Conference Hilton Post Oak Hotel, Houston, TX (800) 752-8878 September 28-30: Interstate Oil & Gas Compact Commission Annual Conference Skirvin Hotel, Oklahoma City, OK (405) 525-3556 Minnesota Nursery & Landscape Association Tessman Company Greenhouse Buying Expo When: August 12, 2015 Time: 9:00 AM to 4:00 PM Where: The Prom Center 484 Inwood Avenue, N. Oakdale, Minnesota 55128 United States Contact: Dan Faust dfaust@tessmanseed.com Phone: 651/487-3850 Tessman is ready to help you with all of your greenhouse, nursery, garden center and landscaping needs! This year’s Greenhouse Buying Expo includes: . New Product Lines . Detailed Product Information . Show Buying Specials & Dating . Breakfast and Lunch Provided . Multiple Vendors Attending . Informational Speakers – to be announced! . Dosmatic Repairs available at a show discount . Bring your injector to the show or ship it to us! . Door Prizes; Free Beer . Free hotel room for out-of-town customers. Call Sara for details at 651/487-3850. AGC of MN AGC of Minnesota CLC – St. Paul Saints Game When: Tuesday, August 18, 2015 Time: 5:30 PM to ??? Where: New Saints Stadium, St. Paul, MN Contact: Merry Beckmann mbeckmann@agcmn.org, Phone: 651/796-2187 Details: The new Saints Stadium is open! Join your fellow CLC members at this networking only event on Tuesday, August 18, in the Gallery (behind home plant). We will begin the festivities at 5:30 PM followed by the 7:00 PM game. Would you like to sponsor this event? Sponsorships are available for $200 and your name will go on all the promotional pieces and help defray the cost of the tickets. Contact Merry if interested at 651/796-2187 or mbeckmann@agcmn.org. Online registration is available after June 15th at www.agcmn.org.
AGC of MN AGC of Minnesota – Sporting Clays Fundraiser When: Monday, August 24, 2015 Where: Minnesota Horse & Hunt Club 952/447-2272 3300 220th Street East, Prior Lake, MN 55372 Contact: Denise Woods dwoods@agcmn.org, Phone: 651/796-2186 Registration details will be available in July. AGC of AMERICA Contractors Environmental Conference Join us in SEPTEMBER 2-3, 2015 in ARLINGTON, VA Welcome to the 2015 CEC: the nation’s foremost management conference for environmental professionals in the construction industry. Join us on September 2-3 in Arlington, VA to explore ways to turn environmental responsibilities into successes for you and your firm. Whether your goal is an excellent compliance record or setting your company apart as a green contractor, AGC’s CEC is the conference for you! For information, please contact: Leah F. Pilconis, Consultant on Environmental Law & Policy, Senior Environmental Advisor to AGC of America at pilconisl@agc.org. LABOR DAY WEEKEND, SEPTEMBER 4 through SEPTEMBER 7, 2015 In conjunction with the Rock River Thesheree’s Annual Show at Thresherman’s Park, 51 East Cox Road, off of US51 near Edgerton, Wisconsin. Please note, that the show days are Friday through Monday, not Friday through Sunday. This is to conform to the hosting show’s schedule. Edgerton is approximately 55 miles southwest of Milwaukee, 90 miles northwest of Chicago, and 25 miles southeast of Madison. The show features a tremendous variety of equipment and exhibits, including a steam pile driver, steam train, machine shop, sawmill, tractors, fire trucks, and, of course, threshing and traction engines. For more information, please contact: Historical Construction Equipment Association 16623 Liberty Hi Road, Bowling Green, Ohio 43402 Phone: 419-352-5616 – Fax: 419-352-6086 General Requests, Memberships and Merchandise Orders: info@hcea.net. NTEA TRUCK PRODUCT CONFERENCE The Association for the Work Truck Industry SEPTEMBER 15-17, 2015, Dearborn, Michigan Royal Dearborn Hotel & Convention Center, Dearborn, MICHIGAN Learn about next year’s vocational truck and product offerings from 13 chassis manufacturers at the NTEA’s Truck Product Conference. This industry event is scheduled Tuesday, September 15 through Thursday, September 17, 2015. Stay on the cutting edge: Preview truck options for the coming model year. Gain access to OEM representatives who can address technical questions. Identify solutions for potential conversion issues. Connect with industry professionals. For more general NTEA information, please use the following contact information: Administrative Office: 37400 Hills Tech Drive Farmington Hills, MI 48331-3414 Phone: 248/489-7090 • Toll-Free: 800/441-6832 Fax: 248/489-8590 Email: info@ntea.com AEM MEDIA SERVICES presents BAUMA CONEXPO AFRICA BAUMA CONEXPO AFRICA will be held September 15 to 18, 2015 at the Johannesburg Expo Centre in Johannesburg, South Africa. The show is owned and organized by the Association of Equipment Manufacturers (AEM) and Messe Munchen International (MMI). Exhibit space sales are now open for Bauma ConExpo Africa 2015. Companies applying for space by February 12, 2015, will be included in the first round of booth assignments. After that date, applications will be accepted on a first come, first served basis. World-class exhibition in important marketplace Exhibitors at the last show pointed out the high quality of attendees. The 2015 show venue is the country’s largest purpose-built exhibition and events facility, offering a modern space and services. And, show participants benefit from the global experience and customer service of AEM, organizer of CONEXPOCON/AGG, and MMI, organizer of BAUMA. BAUMA CONEXPO AFRICA has broadbased support from leading industry groups in Africa and worldwide. After 2015, the show goes to a three-year cycle in response to local and international industry input. AEM is show exhibitor contact for the Americas: visit the show website: www.bcafrica.com for more details. Contact AEM at sales@aem.org or by telephone +1-414-298-4150/ toll free U.S. and Canada 800-867-6060. ICUEE – the EMO EXPO 2015 The International Construction and Utility Equipment Exposition DATE: September 29, 2015 to October 1, 2015 Venue: Kentucky Exposition Center, Louisville, United States ICUEE, also known as The Demo Expo, is the largest event in North America for utilities and utility contractors seeking new equipment, technologies, and best practices for construction and rehabilitation projects. With 25 acres of exhibits to explore, attendees can comparison shop more than 800 suppliers through equipment test drives and interactive product demonstrations. At ICUEE 2015, attendees will have an opportunity to: . Visit with more than 850 leading manufacturers. . Explore the latest utility products and innovations. . Operate construction and utility equipment in job-like conditions. . “Test run” the products specific to your operation’s needs in a variety of ways, including: . Specialized exhibit pavilions for fleet management, safety and green utility. . A 2-mile Ride & Drive test track (for on-road equipment and technologies). . An Indoor Demo Stage . Extensive in-booth exhibitor product demos . Learn from the pros! . Attend sessions to help you better understand the latest technologies and issues that are impacting the way you do business. . Talk directly to technical experts and equipment designers who can answer your industry-specific questions. Customer service: ICUEE’s customer service team is here to assist you! Hours: 8 AM to 4:30 PM (Central Time, USA) PHONE: US and Canada: Toll Free: 800/867-6060; email: info@icuee.com OHIO FORESTRY ASSOCIATION PRESENTS “THE ORIGINAL AMERICAN FORESTRY SHOW” OFFICIAL PAUL BUNYAN SHOW DATES: OCTOBER 2-4, 2015 TIME: 8:00 AM TO 5:00 PM FRIDAY AND SATURDAY 9:00 AM TO 3:00 PM SUNDAY PLACE: GUERNSEY COUNTY FAIRGROUNDS 335 OLD NATIONAL ROAD OLD WASHINGTON (CAMBRIDGE), OH 43768 ADMISSION PRICES: $8 – ADULTS – $4 - SENIORS (60 & OVER) & KIDS (7 12) CHILDREN 6 & UNDER – FREE!!! NO PETS ALLOWED! THERE WILL BE FORESTRY EQUIPMENT RUNNING LIVE THROUGHOUT THE GROUNDS AND IT IS A VERY LOUD AND SCARY PLACE FOR PETS! PLEASE LEAVE YOUR PET AT HOME! NO UNAUTHORIZED VEHICLES, ATV’S OR PERSONAL GOLF CARTS ALLOWED ON SHOW GROUNDS. SHOW INFORMATION INCLUDES: ACTIVITIES, COMPETITIONS, EXHIBITORS, LODGING/DINING, EXHIBITING INFORMATION AND VOLUNTEERS. PAUL BUNYAN SHOW IS A THREE-DAY EVENT. THE MAIN AIM OF THE SHOW IS TO PROVIDE ACCESS TO KNOWLEDGE AND TECHNOLOGY THAT WILL ENHANCE THE QUALITY OF LIFE OF INDIVIDUALS, FAMILIES, INDUSTRIES AND COMPANIES. THE EVENT IS ORGANIZED BY THE OHIO FORESTRY ASSOCIATION, INC., THAT SUPPORTS THE FOREST RESOURCES AND IMPROVEMENT OF BUSINESS CONDITIONS OF ITS MEMBERS. PAUL BUNYAN SHOW IS BASED ON THE RESEARCHES OF DIFFERENT INDIVIDUALS AND COMPANIES. FOR MORE INFORMATION, PLEASE CONTACT OHIO FORESTRY ASSOCIATION. PHONE: 614/497-9580, FAX: 614/497-9581, EMAIL: INFO@OHIOFOREST.ORG
Authorized Bobc at Dealer s
CO CONNECTICUT NNECTICUT
N NEW EW YYORK ORK
Bobcat of Connecticut
Bobcat of Saratoga
East Har tford
Gansevoor t
860-282-2648
518-798-9283
Stratford 203-380-2300 w w w.bobcatct.com
DELAWARE DELAW WARE Bobcat of Sussex County Delmar
w w w.bobcatofsaratoga.com
Robert H. Finke & Sons Inc Selkirk 518-767-9331 w w w.bobcatofsaratoga.com
Summit Handling Systems
302-846-3355
Walden
w w w.bobcatsc.com
845-569-8195 w w w.summitbobcat.com
M MARYLAND ARYLAND Metro Bobcat, Inc. Eldersburg 410-795-1500 • 866-533-0543
PE NNSYLVANIA PENNSYLVANIA Bobcat of Lancaster Ephrata 717-859-4646 • 888-791-6899
Forest ville
w w w.lancasterofpa.com
301-568-1104 301-840-9300
Highway Equipment & Supply Co.
White Marsh
570-788-1127
Gaithersburg
410-483-0600 w w w.metrobobcat.com
MASSACHUSETTS MASSACHUSETTS Bobcat of Greater Springfield West Springfield 413-746-4647 w w w.bobcatct.com
Drums w w w.hw yequip.com
Marshall Machinery, Inc. Honesdale 570-729-7117 w w w.marshall-machiner y.com
Reading Tractor & Equipment Leespor t
NEW HAMPSHIRE HAMPSHIRE NEW
610-926-2441 • 888-835-6429 w w w.readingtractor.com
Bobcat of New Hampshire Chichester 603-224-1234
R RHODE HODE IISLAND SLAND Bobcat of Rhode Island
Hudson
War wick
603-579-9955
401-921-4300
w w w.bobcatnh.com
w w w.bobcatct.com
NEW JE RSEY NEW JERSEY
VVERMONT ERMONT
Bobcat of Central Jersey
Champlain Valley Equipment
Green Brook
Derby
732-752-0002
802-766-2400
w w w.newjerseybobcat.com
East Randolph
Bobcat of North Jersey Totowa
802-728-5453 w w w.champlainvalleyequipment.com
973-774-9500 w w w.njbobcat.com
Garden State Bobcat Freehold 732-780-6880 w w w.newjerseybobcat.com Bobc at ® and the Bobc at logo are registered trademarks of Bobc at C o m p a n y in t h e U ni t e d S t a t e s a n d v a r io u s o t h e r c o u n t r ie s . © 2 0 15 B o b c a t C o m p a n y. A ll R ig h t s R e s e r v e d . | 0 7 15 4 0 2
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 125
GOT A BEAST OF A JOB?
C NTROL THE CHAOS. CO New, improved and bat tle-tested, Selectable Joystick Controls deliver a low-effor t , high-per formance at tack by tailoring loader per formance to difficult jobs.
SEE HOW SJC CAN CHANGE YOUR PLAN OF A AT T TACK. Visit B Bobcat.com/Option11 obcat.com/Option11 Bobcat ® and the Bobcat logo are registered trademarks of Bobcat Company in the United States and various oth ©2015 Bobcat Company. All Rights Reser ved. | 0715402
Page 126 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Construction Equipment Guide • Parts Section • www.constructionequipmentguide.com • August 12, 2015 • Page 127
New Pa. Facility Features 60,000-Sq.-Ft. Main Building Guests were treated to a hydrovac demonstration.
Equipment demonstrations, such as this one for a D6K2 LGP, also were a part of the activities during the open house. CLEVELAND from page 49
3516 engines that it has at the compressor stations. “We can rebuild them here and then run them here in our shop,” said Borys. “We have a two-inch gas line coming into the building with 50 psi, so we have the capability to run any natural gas.” Gas Company Business Cleveland Brothers is seeing an increase in pipeline work. “Pipeline is considered oil and gas, so right now they are putting a lot of pipe in the ground, so we are probably seeing I would have to say we are still probably 40 percent for oil and gas,” said Borys. Guests make their way down the line for a delicious barbe- “Heavy construction cue dinner, potato and maca- really picked up, roni salad and more. highway construction
and residential construction, that all picked up this year.” Celebrating in Style The grand opening drew customers, friends and their families from the northeastern Pennsylvania area. Guests were treated to a barbecue dinner, as well as demonstrations of Caterpillar equipment and tours of the new facility. NASCAR’s Ryan Newman, driver of the Cat-sponsored car, helped open the facility with flair when he drove
his racecar across a finish line in front of the main building, while hundreds of spectators looked on. After that, Newman answered questions from fans and signed autographs. Several individual information stations specific to the various services and products the company carries were helmed by Cleveland Brothers staff throughout the facility. For more information, visit http://www.cleveland brothers.com/.
PUMP REBUILDS ALL MAKES & MODELS OF MACHINES SAVE UP TO 60%
• Full-Service Hydraulic Repair • Turnkey Hydraulic Systems • Hydraulic System Integration • Professional Field Service • Full Machine Shop • Hard Chrome Plating • Large Seal Inventory
Call Ken or Marc
716/681-8474 Fax: 716/681-8514 4474 Walden Avenue Lancaster, NY 14086 sales@fluidpowerservice.com
ONE YEAR WARRANTY
1985! e c n i S
NEW, USED & REMAN PARTS • • • • • • • •
Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!
CYLINDER REPAIR EXCHANGE
www.fluidpowerservice.com
www.RBusedParts.com The open house offered great opportunities for customers to check out and ask questions about Caterpillar equipment, such as this 259D skid steer.
Next Issue Closes August 17th
CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com
Page 128 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Harlo Names New National Sales, Marketing Manager Harlo Products, a subsidiary of Harlo Corporation, a leader in the (RTFL) rough terrain forklift industry has recently appointed Anthony J. Lirones as its national sales and marketing manager to lead its sales and marketing department. Lirones will be based out of the company headquarters located in Grandville, Mich. Tasked with further developing Harlo Products’ existing dealer partnership network, Lirones’s efforts will be concentrated on developing/administering new marketing strategies to grow the overall Harlo market share by applying his extensive sales and marketing experience acquired through his years in both the (OE) original equipment as well as (AM) aftermarket sectors. With a background rooted in the powertrain industry (including diesel power, heavy equipment and specialty markets), he brings with him more than two decades of sales and marketing experience in addition to being very mechanically minded and technically savvy. His unique skill set will be useful to further cultivate territories, enhance customer support while focusing on working side by side with dealers to broaden their market, and strategically drive the development of new product
developing dealers that have yet to be established. I am privileged to have this opportunity and look forward to expanding Harlo’s market penetration with its superior line of products that have become a staple in the forklift industry. “With recently celebrating 75 years in business, with over three generations of privately held interest, Harlo Corporation’s history speaks volumes to its integrity as well as to its commitment to not just the Industry, but moreover to their customers — it’s unmatched and something I am proud to become a part of.” About Harlo Products A minority owned business, Harlo Products has been serving the vertical mast rough terrain forklift industry and continues to be a market leader in building rough terrain forklifts meeting a variety of modern Harlo Corporation appointed Anthony J. Lirones as its national sales and market- day needs including; agriculture, construcing manager to lead its sales and marketing department. tion, utilities, rental and others. The company is headquartered in Grandville, Mich., offerings, according to the company. me with a unique skill set which will allow distributing its products worldwide. Lirones said, “I am honored to be wel- me to be extremely effective in this key role For more information, visit comed as part of Harlo Products leadership at Harlo Products. www.harlo.com. team. Being passionate about sales and “I look forward to working directly with (This story also can be found on marketing coupled with my hands-on back- Harlo’s existing dealers on programs to Construction Equipment Guide’s Web site at ground in the powertrain industry provides help them secure more business as well as www.constructionequipmentguide.com.)
EMPLOYMENT OPPORTUNITY
Magnum Attachments Inc., a leading Distributor of Hydraulic Attachments, has an outstanding opportunity for a Regional District Manager for Northeastern United States. As a District Manager, the candidate will be responsible for managing sales of the Magnum Products through an authorized distribution network. The candidate will be responsible for maintaining growth within existing distribution as well as establishing new distribution channels. The candidate should have prior experience in wholesale distribution, be self motivated, PC proficient (Microsoft Office) and willing to travel 75% of the time. To learn more about our company and products please visit our website at www.magnumattachments.com. We offer a competitive remuneration package. Interested candidates may email their resume to tracy@magnumattachments.com or by fax to 877-640-2863.
Terex Announces Financing Programs Terex offers a limited-time special zero percent financing rates on all Terex skid steer loader, compact track loader, compact excavator and compact wheel loader models. Terex also is offering cash discounts from $3,000 to $10,000, depending on the equipment model, in lieu of interest-free financing to best meet customers’ business needs. This program is now available through Terex compact equipment distributors in North America through Sept. 30, 2015. From selecting the right machine for the application to determining the total cost of ownership, Terex focuses on helping customers maximize their equipment investment. “By combining Terex Construction’s broad range of compact equipment and services with our attractive financing programs, we are able to provide a positive ownership experience,” said Gary Dennis, vice president and general manager of Terex Construction Americas and Global Aftermarket. “Today’s customers expect more for their money from both their distributor and their manufacturer. We are committed to providing our compact equipment owners with more equipment choices and support before and after the sale.” Customers who purchase a Terex skid steer loader or compact track loader in the third quarter will have three financing options available to choose from: 1) zero percent interest financing for 60 months; 2) zero percent interest financing for 48 months plus a free 2-year/2,000-hour full machine extended warranty; or 3) $3,500 customer cash on loader models under 60 hp (R160T, R165S, R185S, V200S, R190T, R200S, V230S) and $4,000 customer cash on loader models over 70 hp (PT-75, R265S, V350S, PT-110 and PT110 Forestry).
Under the third quarter financing program, customers purchasing a Terex compact excavator can choose between zero percent interest financing for 48 months or cash incentives of $3,000 on TC16, TC20 and TC29 models, $4,000 on TC35 and TC37 units, $5,000 on TC48, TC50 and TC60 machines and $7,500 on TC75 units. Customers financing a Terex compact wheel loader in the third quarter can select zero percent interest financing for 60 months or cash incentives of $5,000 on TL65 loaders, $7,500 on TL80 and TL100 models and $10,000 on TL120 units. Offered exclusively through Terex Financial Services, the Q3 financing program is available on Terex skid steer loaders, compact track loaders, compact excavators and compact wheel loaders funded from July 1, 2015, to Sept. 30, 2015. Participating customers are subject to the program’s terms and conditions, credit approval and completion of satisfactory documentation. Part of the Terex family, Terex Financial Services offers a wide range of effective finance and leasing solutions, structured to complement customers’ cash flow and budgets. The Terex Financial Services team assists in all areas of asset management, from the analysis of future equipment values through the disposal of used equipment. With Terex Financial Services, customers work directly with financing professionals who understand the business and help operations get the equipment they need with financial solutions based on the business’ goals and objective. For more information, visit www.terex.com/construction. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 129
The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $105
Excavator, Backhoe & Loader Buckets, New & used, over 500 in stock, also Grapples, Thumbs & other attachments
C&S Equipment Co. 609/267-0782
16-17 AP
NEW AND SURPLUS STRUCT. STEEL JUMBO BEAMS, PIPE, ROAD PLATE
Pile Driving Equipment For Sale! Vibro Hammers, Diesel Hammers, Air Hammer ALL w/leads. 3 Cranes: 50 ton, 40 ton & 35 ton. Cat D8 Dozer. Komatsu Loader
Joseph Fazzio Inc.com • 856-881-3185 N.J. 16-17 TM
Call John Helms 518-853-3784
15-16 AM
“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of HighQuality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states .............................................................Call
Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us 15-16 TM
IN STOCK Stone Box, Miser Box, Stone Miser, Stone Sled, Rock Boat, Bedding Box, Gravel Box, 7 Yard............$5,450 9 Yard .........................................................................$5,850 www.JFINC.com • 856-881-3185 16-17 TM
MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make & model. Call McLaren 888-492-4230 16-17 DH
MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. Call McLaren 888-492-4230 16-17 DH
MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air SemiPneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 16-17 DH Call McLaren 888-492-4230
Michigan 175B, Runs Good, 26.5x25 Tires, 5 Yd Bucket, Winter is Coming ........................................Asking $18,000
Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 614-395-4064 15-16 EB
2006 Ditch Witch FX60 Vacuum Excavator, 800 gal spoils capacity, 200 gal water tank, 4 cylinder Cummins engine, 3251 hours ..............................................$32,500 15-16 EB Call Tania 614-443-9751 x237
Lowboy Trailer Pin On Flip Axles, In Stock, 275/Tires, Aluminum Wheels 610/534-0700 John at Stephenson Equipment 15-16 TM
Call Bob 800-859-3693
16-17 AP
Diesel & Gas / LP Exhaust Scrubbers
Here' s how the BARGAIN ADS Work:
Foley Engines
• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $105 per ad, $50 additional for color. Additional $20 to place online • Your ad will run for two consecutive issues in 1 region.
800.233.6539
16-17 KU
Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Northeast States. For more information, call Construction Equipment Guide today at Did this ad catch your attention? Color can work for you. Call Construction Equipment Guide 800/523-2200
800/523-2200
Page 130 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CLASSIFIEDS
Classified Rates:30 Words or Less for $35.00. Each Additional Word is $1.16. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034
215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200
2008 Doosan DX225, DL06 Engine w/ 5.7m boom, 42’’ grapple, 9.6’’ stick, Good condition, 3,269 hrs ............$97,700.
AIR COMPRESSORS
\CRANES
Compressors
Crawler Cranes
2015 DryAIR 250FS, Aftercooler for a portable compressor, New ................$2995.
Link-Belt LS108B, S/N 9GL4525 w/ 100’ angle boom, 11/4 yd clam, Rud-O-Matic single tag, Detroit, Current certification, FOB Chicago ................ ............................$30,000 obo
2005 Cat 315CL, S/N CJC02002, hydraulic quick coupler, Good condition, 7,200 hours ..........................$70,000.
Associated Partners, Inc. 630-240-0020
2006 CAT 330DL, Cab w/ Air, Double Acting Aux Hydraulics., Hydraulic thumb, Good condition, 8901 hours........$118,500.
Trask-Decrow Machinery 207-799-1538 1995 Indersoll Rand 825, good condition, 9,438 hours $12,000.
Crane Inspections
T III Enterprises, Inc. 215-340-3650
FLAT RATE INSPECTIONS
ATTACHMENTS
All Types, Any Model Cranes
Attachments - Misc.
OSHA Inspected and Certified
2004 Bradco 611 Attachment, Front Mounted Skid Steer backhoe, Good condition ....$6,250.
Certified OSHA and ANSI Full-Time Inspectors Dielectric Testing
Harter Equipment Inc. 732-446-7600 Attachments for Sale: NPK E213 Hammer....$16,000.
Call 800-325-6455 Stephenson Equipment Visit our website: www.stephensonequipment.com ALL TYPES OF CRANES INSPECTED AND CERTIFIED
CAT A26 Auger ............$1,400. 10’’ Wide 4’ Long Auger bits (New) ......................each $200. Allied 4000 Hoe Pac..$14,000. JRB PC400 Coupler ....$2,500. ESCO PC300 Coupler $2,000. Specialty Rentals 609-561-7702
BUCKETS Buckets - Misc. Adjust-A-Bucket hydraulic tilt, fits Cat 225 excavator with 64’’ smooth edge, bucket can be adapted to others $3500 Also... Cat 990 Spade Nose Bucket $4900 Cat 955 GP Bucket $1200 724-925-9034
Accredited by the US Dept. of Labor Under 29CFR Part 1919 and Accredited by CALOSHA Call 215-639-2579 Atlantic Crane Inspection Services Visit us at www.atlanticcrane.com
EXCAVATORS Hydraulic Excavators Cat 245B II, s/n 6MF604, recent engine & hyd pumps, plumbed for shear, 70’’ bkt., FOB Chicago..............$18,700. Cat 345B II, s/n AGS919, Strong unit plumbed for shear, 50% + u/c, 50’’ bkt., FOB Chicago ......................$54,000. 1995 Liebherr R954, s/n 4940230, high hours but VG runner! FOB Chicago ......$25,000.
Gibson Machinery, LLC 440-439-4000
Groff Tractor & Equipment Inc. 717-766-7671
Mini Excavators 2014 Terex TC20, Mini Excavator / Backhoe, Rubber tracks, 20’’ bucket with hitch, New condition, 8 hrs ..$32,000. Buckeye Equipment Sales 330-612-6623
Skid Steer Loaders
TRAINING
TRUCKS
2014 Terex TSV90, New Skid Steer, Cab, heater, 72’’ bucket, New condition ............$53,000.
Operator Training
Articulating Trucks
NCCCO Crane Operator Training
2006 Moxy MT41, Articulated Dump Truck, Fair condition, 6,800 hrs. ................$125,000.
Buckeye Equipment Sales 330-612-6623 2011 New Holland C232, Compact, 2-speed drive, E-H Controls, Manual Coupler, Open ROPS, Vinyl suspension seat, Engine block heater, 17.7’’ rubber tracks, LPE bkt w/ bolt on cutting edge, 1,081 hours .. ....................................$32,500. Martin Implement Sales 708-349-8430
Wheel Loaders John Deere 544G, S/N 54172, Cab w/ Air, GP Bkt w/ teeth, Q/C, forks & form filled tires, FOB Chicago ....$26,500/OBO.
Mobile Tower Self Erecting Tower Overhead Articulated Knuckleboom Service Truck Rigger 1 & 2 Signal Person Trained at our location in PA or NJ or your location.
NCCCO Crane Operator Training Mobile Swing Cab, Fixed Cab, Lattice Truck & Crawler
Harter Equipment Inc. 732-446-7600
Associated Partners, Inc. 630-240-0020
Overhead
LOADERS Backhoe Loaders 2011 Kubota M59, Sims cab w/ Heat, R4 tires, HST Trans, Hydraulic Thumb, Very clean, runs great, good condition, 943 hours ..........................$48,500. Harter Equipment Inc. 732-446-7600
Crawler Loaders Cat 973, S/N 86G3415, Cab w/ complete demolition pkg, including bucket, 50% + U/C except shoes, FOB Chicago .... ....................................$25,000.
Tower
Hands On Training with Practical Exams
Groff Tractor & Equipment 717-766-7671
Signal Person
One-Hour Practice with Practical Exams
Rigger I & II Re-Certifications
Material Handlers Sennebogen 825M-C, S/N 825-0-589, Fair condition, 3,481 hours ................$60,000. Gibson Machinery 440-439-4000
TRACTORS Agricultural Tractors
2003 Link-Belt LS5800Q, s/n 3J3570, Engine out & need of O/H, FOB Chicago .................. ............................$19,000 obo.
Komatsu D75-S, Crawler loader, Operational in fair condition, FOB Chicago $7,000 obo
1998 Ford 1110 Compact Tractor, 13 HP, 4WD, 3 Point HItch, Front angle snow blade, Good condition, 597 hours ...... ......................................$3,500.
Associated Partners, Inc. 630-240-0020
Associated Partners, Inc. 630-240-0020
Harter Equipment Inc. 732-446-7600
Like on
Prep Classes with Written Exam
2002 Volvo L35B, Cab w/ Air, Front Aux Hydr, Front coupler, 4WD, 1 yard bucket and forks, Good condition, 13,655 hours .. ....................................$26,500.
MATERIAL HANDLERS
Groff Tractor & Equipment Inc. 717-766-7671
Call 215-639-2579 Atlantic Crane Inspection Services Visit us atwww.atlanticcrane.com
John Deere 644G, S/N 544147, Cab, GP Bkt w/ teeth, Q/C, foam filled tires, FOB Chicago ......................$27,500.
Harter Equipment Inc. 732-446-7600
2012 Terex TA400, T4 w/ Exhaust kit, Auto lube, Tailgate, Used condition, 1807 hrs ........ ..................................$375,000.
All trainers NCCCO Certified
2011 Bobcat E35 is a zero tail swing model, Rubber tracks, 12’’ bucket, 24’’ bucket, Good condition, 1,170 hrs ....$29,000.
1999 Kubota KX41-2RBI, Compact. Perfect for back yard use, comes with dozer blade, 12’’ pin on bucket, Fair condition, 2,911 hrs ..............$9,000.
Gibson Machinery 440-439-4000
4 training locations in PA or at your location All instructors are NCCCO Certified Call Chris 717-558-7248 Stephenson Equipment Visit our website: www.stephensonequipment.com
Next Issue Closes Monday August 17th
What’s going on in YOUR COMPANY
We want to know! Give us a call.
Construction Equipment Guide
(800) 523-2200 OR
FAX:
(215) 885-2910
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 131
Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items
If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted NEEDED BULLDOZER D9R WITH RIPPER UNDER 9000 HOURS ON THE FRAME AND METER CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL:JEANMAURICEBOUTIN@ VIDEOTRON.CA –––––––––––––––––––––––––––––––– HN 110, 140, 80 HITACHI CONTACT: SVASSOCIATES PHONE: 903-048-9996 EMAIL: SVASSOCIATES6@GMAIL.COM –––––––––––––––––––––––––––––––– D6D OR D6C DOZER | NOT MORE THAN $15,000 CONTACT: ST.MARK OREBELA PHONE: +2348062120316 EMAIL: SOREBELA@HOTMAIL.CO.UK –––––––––––––––––––––––––––––––– CASE 580 LOADER BACKHOES | CASE MODEL 580 SK L SL M SM N SN LOADER BACKHOES CONTACT: FRANK HORAN PHONE: 800-33-GROFF FAX: 732-780-3618 EMAIL:FRANKHORAN@ GROFFTRACTOR.COM –––––––––––––––––––––––––––––––– DEERE 450C | I NEED A SET OF SWEEPS OR LIMB RISERS FOR A JOHN DEERE 450C WITH MOUNTING BRACKETS. I ALSO NEED A WINCH LEVER CONTROL CABLE. CONTACT: JOHN RATLIFF PHONE: 276-608-1507 FAX: 276-591-1239 EMAIL:CMESALES@BVU.NET –––––––––––––––––––––––––––––––– HOUGH PAYLOADER HF | 1947 TO 1954 HOUGH HF COMPLETE, PARTS OR SALVAGE. CONTACT: TIM ROONEY PHONE: (651) 433 2142 EMAIL: BROONEY@FRONTIERNET.NET –––––––––––––––––––––––––––––––– CAT | ABOUT 550 BULLDOZER CONTACT: MARVIN CAMPBELL PHONE: 360-229-6558 EMAIL: SUPERPAPA53@AOL.COM –––––––––––––––––––––––––––––––– HM WHEEL LOADER 2021 | I WANT BUY HINDUSTAN WHEEL LOADER 2021 CONTACT: HARESH MEHTA PHONE: 992-553-1659 EMAIL: MEHTA.HARESH84@GMAIL.COM –––––––––––––––––––––––––––––––– TRAILER FLIP AXLES | WANTED TO BUY USED: FLIP AXLE FOR 1996 TRAIL KING MODEL TK70MG FLIP AXLE FOR 2013 FONTAINE MODEL MAGNITUDE 40MX CONTACT: DAVE PHONE: 570-494-4010 FAX: 570-494-4014 EMAIL: DAVEPHILLIPS@ ALLISONCRANE.COM –––––––––––––––––––––––––––––––– USED SMALL TRACTOR WITH BUSHHOG AUTOMATIC | GOOD USED SMALL TRACTOR NOT MUCH BIGGER THAN A LAWN MOWER WITH 6BUSH HOG. AUTOMATIC CONTACT: HINSON PHONE: 334-295-8392 EMAIL: CUDIE926@ATT.NET ––––––––––––––––––––––––––––––––
WE BUY EQUIPMENT MANUALS | WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS, BUT NOT INCLUDED TRUCKS AND VEHICLES. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL US. CONTACT: GRACE FRANCES PHONE: 270-849-2270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– A WALK BEHIND BRUSH CUTTER CONTACT: BILL STEMPLE EMAIL: THELMASTEMPLE@ATT.NET –––––––––––––––––––––––––––––––– TACK WAGON | NEED A NEW OR LIGHTLY USED TACK WAGON - 500GAL WITH SPRAY BAR CONTACT: BARBARA SPAIN PHONE: 703-851-7702 FAX: 301-396-5783 EMAIL:BARBARAS@ PAVEMENTCORP.COM –––––––––––––––––––––––––––––––– HEAVY DUTY DOZERS, CRANES, LOADER, MOTOR GRADER, EXCAVATORS AND HEAVY DUTY TRUCK. KINDLY FURNISH ME WITH DETAILS OF AVAILABILITY, PRICES AND CONDITIONS OF SALES TO ENABLE US PLACE ORDER.THANKS FOR ANTICIPATED COOPERATION. CONTACT: ENGR. BALA DANSHEHU PHONE: TEL:+234-810-9940714 FAX: FAX:+44-129-1200057 EMAIL: ENGR.BALA.FMWNIG@ GMAIL.COM –––––––––––––––––––––––––––––––– DAVID BRADELY WALK BEHIND TRACTOR PLOW CONTACT: GREG HUNTZINGER EMAIL: 1HUNTZY@GMAIL.COM –––––––––––––––––––––––––––––––– NEED BULLDOZER D10R 1996AT 2005 | NEED BULLDOZER D10R ENC CAB WITH RIPPER UNDER UNDER 12000 HOURS REAL HOURS ON THE FRAME GOOD UNDERCARRIAGE FROM USER NOT ADVERTISED I PAY 85000.00US AT 185000.00US CONDITIONAL INSPECTION CONTACT: JEAN MAURICE BOUTIN EMAIL: JEANMAURICEBUTIN@ VIDEOTRON.CA –––––––––––––––––––––––––––––––– CATERPILLAR CRAWLER LOADER | I AM LOOKING TO BUY A CATERPILLAR 943, 953, 963 OR 973 CRAWLER LOADER WITH A 4-IN-1 BUCKET AND WORKING A/C. THE MACHINE DOES NOT HAVE TO BE NEW OR HAVE A GREAT UNDERCARRIAGE, I NEED IT TO COMPLETE A FEW PROJECTS AT MY HOME. I AM LOOKING FOR SOMETHING $20, 000 OR UNDER. THE MACHINE WILL NEED TO BE TRANSPORTED TO NAPLES, FL 34117. CONTACT: WARREN EMAIL: TWOPETIES@AOL.COM ––––––––––––––––––––––––––––––––
USED UTILITY TRACTOR/1520HP | LOOKING FOR A USED UTILITY TRACTOR FOR SM. FARM. CONTACT: DAVID RUDOLPH PHONE: 419-684-5594 EMAIL: BRUDOLPH007@BEX.NET –––––––––––––––––––––––––––––––– BULLDOZER D10R D10T ENC CAB WITH RIPPER USER NO SCAM NO INTERNERT FROM CONTRACTOR IN ALL USA THE PRICE MUST BE UNDER SALESMAN PLEASE 12 MONTHS FROM JEAN MAURICE CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– USED 20 YD DUMPSTERS CONTACT: VENTURE TWO CONTRACTING PHONE: 484-250-9311 EMAIL:RMORELLA149@GMAIL.COM –––––––––––––––––––––––––––––––– PC350LC-8 2011 UP, NOT MORE THAN 7000 HOURS PREFERABLY FROM AREA NEARBY SHIPPING FACILITIES FOR OVERSEAS OR FROM EUROPE FITTED WITH HAMMER SYSTEM AND LINES.READY TO WORK CONTACT: WADIE IBRAHIM PHONE: +962795523295 FAX: +96265821653 EMAIL:WZIBRAHIM@NEEC.COM.JO –––––––––––––––––––––––––––––––– LIFT HINOWA CONTACT: JOHN FISCHER PHONE: 4023262858 EMAIL: JOHNFISCHER420@EARTHLINK.NET –––––––––––––––––––––––––––––––– RIPPER FOR JOHN DEERE 770BH MOTORGRADER USED CONTACT: HECTOR SANDOVAL PHONE: 5206047575 FAX: 5202872038 EMAIL:MACH4503@YAHOO.COM –––––––––––––––––––––––––––––––– TOWABLE LIFT | TOWABLE LIFT 20-25 REACH CONTACT: JOE PRIESS PHONE: 4195261822 EMAIL: PENNY41@EARTHLINK.NET –––––––––––––––––––––––––––––––– YANMAR TF110 | I WANT TO BUY A YANMAR TF110 CONTACT: PHILEX PHONE: 4097398992 EMAIL: PHILEXCONLOUIS@GMAIL.COM –––––––––––––––––––––––––––––––– 600AJ JLG BOOM LIFT CONTACT: SAGAR PHONE: 009765424247 EMAIL: GURUDATTCRANE5000@GMAIL.COM –––––––––––––––––––––––––––––––– SKID STEER ADAPTER PLATE FOR WACKER NEUSON WL50 | ADAPTER PLATE FOR WACKER NEUSON WL50 WHEEL LOADER TO USE SKID STEER ATTACHMENTS ON LOADER. CONTACT: JIM MOON PHONE: 2295356562 OR 2298810048 EMAIL: DENISEMCCORD@MSN.COM ––––––––––––––––––––––––––––––––
LOOKING FOR USED 30-40 H P FARM TRACTOR CONTACT: CHARLES SHELBY EMAIL: JMCHARLIE@BELLSOUTH.NET –––––––––––––––––––––––––––––––– I NEED TWO HYSTER CA766A COMPACTORS CONTACT: EDDIE GREEN PHONE: 864-327-3909 EMAIL: EDDIE@BRUCEEQUIPMENT.COM –––––––––––––––––––––––––––––––– KOBELCO 330 EXCAVATOR ENGINE NEEDED COMPLETE OR SHORT BLOCK ENGINE MODEL 6DI6TLE2 CONTACT: RICHARD PHONE: 7322719658 EMAIL: AMIDIRT@AOL.COM –––––––––––––––––––––––––––––––– NEED BULLDOZER KOMASTU 375A 3 WITH RIPPER D10R WITH RIPPER NOT ADVERTISED | NEED BULLDOZER KOMASTU 375A -3 375A -5 375A -6 ENC CAB RIPPER NO INTERNERT NO SCAM NO PAPER USER ONLY USA AND I NEED 10R D10T ENC CAB LOW LOW HOURS NOT NOT NOT NOT ADVERTISED I/TS CLEAR CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL:JEANMAURICEBOUTIN@ VIDEOTRON.CA –––––––––––––––––––––––––––––––– BELLY DUMP SEMI TRAILER CLAM DOORS | WANTING TO BUY CLAM DOORS FOR BELLY DUMP TRAILER, ANY MODEL CONTACT: MIKE PHONE: 319-470-8388 EMAIL: PI2279@YAHOO.COM –––––––––––––––––––––––––––––––– AIR VANTAGE WELDER CONTACT: RICK PHILLIPS PHONE: 419-233-0949 EMAIL: RPHILLIPS1961@LIVE.COM –––––––––––––––––––––––––––––––– WOODPECKER FULLYAUTOMATIC PALLET MACHINE | AUTOMATIC NAILER AND STACKER FOR PALLETS. WE WOULD LIKE ONE THAT GOES FROM 24 X 24 TO 68 X 68 OR SO.. CONTACT: TIM KEITH PHONE: 606-379-5492 FAX: 606-379-0632 EMAIL:KEITHPALLETMILL@ WINDSTREAM.NET –––––––––––––––––––––––––––––––– CONTROL VALVE MANUAL | I WOULD LIKE TO SEE THE ALL SET OF HYDRAULIC HOSE POSITIONING IN CONTROL VALVE OF D65EX-11 MODEL . CONTACT: RANNIE AYSON PHONE: 09056037264 EMAIL:RANNIE.AYSON2002@ GMAIL.COM –––––––––––––––––––––––––––––––– SMALL GAS WERDER, ANY BRAND CONTACT: AL BAKER EMAIL:ALFREDBAKER192@YAHOO.COM –––––––––––––––––––––––––––––––– CONCRETE PULVERIZER | STANLEY LA BOUNTY CONCRETE PULVERIZER MODEL CP80 OR CP100 TO BE INSTALLED ON A CAT 336E L OR 349E L CONTACT: RUSSELL KARR EMAIL: RUSSELL@SCMAGGREGATES.COM ––––––––––––––––––––––––––––––––
WHEEL LOADER | THIRD VALVE CONTACT: ROB PHONE: 306-398-7658 EMAIL: RAMCCREA@SASKTEL.NET –––––––––––––––––––––––––––––––– CASE 580 LOADER BACKHOES | CASE 580 SK L SL M SM N SNS CONTACT: FRANK @ GROFF TRACTOR PHONE: 1-800-654-USED FAX: 732-780-3618 EMAIL:FRANKHORAN@ GROFFTRACTOR.COM –––––––––––––––––––––––––––––––– I NEED ALUMINUM CONCRETE FORMS ANY SIZES BIG QUANTITY CONTACT: LUOIS CARMONA PHONE: 917-517-1117 646-944-4447 FAX: 829-301-8249 EMAIL: VANCASACXA@AOL.COM –––––––––––––––––––––––––––––––– NEED 3306 FOR D6H CONTACT: DEAN HELMER PHONE: 318-282-4490 FAX: 318-428-0152 EMAIL:DEANHELMER13@GMAIL.COM –––––––––––––––––––––––––––––––– PETTIBONE ROUGH TERRAIN FORKLIFT CONTACT: EARL MARTIN | PHONE: 7175171300 | FAX: 7173552466 | EMAIL:EARLMARTIN@POWERPROEQUIPMENT.COM –––––––––––––––––––––––––––––––– KOMATSU PC3508 | PC350-8 YEAR 2010 UP IN A VERY GOOD CONDITION READY TO WORK FITTED WITH HYDRAULIC HAMMER PIPPING CONTACT: PHONE: +962795523295 EMAIL:WZIBRAHIM@NEEC.COM.JO –––––––––––––––––––––––––––––––– SUPPLY SPARE PART | THE SPARE PARTS OF XCMG (LW500 ZL50G ZL30 QY25K QY30K QY50K QY75K QY100 ) SDLG(LG918 LG936 938 LG958 LG956 LG968) SEM SHANTUI CHANGLIN XGMA LIUGONG YTO FONTON 4WG180 4WG200 6WG200 YUCHAI WEICHAI SHANGCHAI CUMMINS AND OTHERS. CONTACT: PETER LIU PHONE: 0086 15263695799 EMAIL: CNDAMP@HOTMAIL.COM –––––––––––––––––––––––––––––––– HITACHI EXCAVATORS EX200, EX400 / CAT GRADERS 140G, 14G, 14H | WE ARE LOOKING FOR HITACHI EXCAVATORS EX200, EX400 & CAT GRADERS 140G, 14G, 14H.PLEASE SEND US INFO WITH PICTURES & OFFER GOOD PRICE. CONTACT: HIDAYAT KHAN PHONE: +92-345-8818803 EMAIL:NAQIB_KHANINTRCO@ HOTMAIL.COM –––––––––––––––––––––––––––––––– CAT LOADER 950, 950B, 950E, 966D, 966E, 966F | WE ARE LOOKING FOR CATERPILLAR WHEEL LOADERS 950, 950B, 950E, 966D, 966E, 966F.PLEASE SEND US INFO WITH PICTURES & OFFER GOOD PRICE. CONTACT: NAQIB KHAN PHONE: +92-333-3298751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– MATS CLIMBING WORK PLATFORM | HEK MASTCLIMBERS WANTED CONTACT: STEVE PHONE: 0411782740 EMAIL: STEVIE@SCOTIAACCESS.COM.AU ––––––––––––––––––––––––––––––––
REAR AXLE | 1992 INGERSOLL RAND MODEL # SD 100 REAR AXLE GEAR CASE OR COMPLETE REAR AXLE. SERIAL # 5595S CONTACT: DOUG MOORE PHONE: 716-937-6575 FAX: 716-937-6502 EMAIL:DOUGM@ZOLADZ.COM –––––––––––––––––––––––––––––––– SUPPLY SEM XCMG SHANTUI SDLG EQUIPMENTS, STEVEN, K1 | LOWER PRICE THAN FACTORY EXPORT DEP CONTACT: PETER LIU PHONE: 0086 15263695799 EMAIL: CNDMP@HOTMAIL.COM –––––––––––––––––––––––––––––––– ENCLOSED CARGO TRAILER 6 X 8. CONTACT: WALTER TRAINOR EMAIL: WATRAIN@HOTMAIL.COM –––––––––––––––––––––––––––––––– NEED CAT BACKHOES 416B / C | NEED CAT BACKHOES MODEL 416B AND C. MUST BE CLOSED CAB, 4X4, EXT HOE. CONTACT: DAN SEXTON PHONE: 423-212-1472 EMAIL: DAN@EQUIPMENTSTATION.COM –––––––––––––––––––––––––––––––– NEED EXCAVATOR 2ND HAND CONTACT: NOOR PHONE: 03125905483 EMAIL:NOOR.HUSSAIN30@YAHOO.COM –––––––––––––––––––––––––––––––– JOHN DEERE 250C | NEED AIR BAGS FOR JD250C CONTACT: TOM PHONE: 215-624-2221 FAX: 215-331-5870 EMAIL: TSDREDGING@MSN.COM –––––––––––––––––––––––––––––––– CAT D7G DOZER | NEED TO BUY D7G WITH CAT OR HYSTER WINCH, STANDARD SHOES (NO LGP) AND S BLADE (NO ANGLE BLADE) CONTACT: NATACHA AUBIN PHONE: +33698174467 EMAIL:NATACHA@ABNEQUIPMENT.COM –––––––––––––––––––––––––––––––– CATERPILLAR EXCAVATOR 225 CONTACT: SIM. EDDY. BARNES. KUMAH PHONE: + 233. 206009438 OR. + 233.24144499 EMAIL: SIMDDYBARNES@YAHOO.COM –––––––––––––––––––––––––––––––– KOBELCO SK75UR NACHI PVD3B60L HYDRAULIC PUMP | LOOKING TO BUY A NACHI HYDRAULIC PUMP FOR A KOBELCO SK75UR EXCAVATOR CONTACT: MICKEY HOOVER PHONE: 814-236-3606 EMAIL: MHOOVERREPAIRS@ YAHOO.COM –––––––––––––––––––––––––––––––– JOHN DEERE 110 BACKHOLE | 2004 UP TO 2012 110 JOHN DEERE TLB BACKHOLE LOWEST HOURS POSSIBLE CONTACT: WILLIE WEBB EMAIL: WILLIEWEBB6666@GMAIL.COM –––––––––––––––––––––––––––––––– (50) WATER TANKER HAULERS | (50) WATER TANKER TRACTOR TRAILERS WITH DRIVERS. 6, 000 / 8, 000 GALLONS EACH. 12-16 HRS PER DAY / 7 DAYS A WEEK / 5 MONTHS. CONTACT: MIKE LINTON PHONE: 731-438-5268 EMAIL: MIKELINTON94@GMAIL.COM ––––––––––––––––––––––––––––––––
Page 132 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Orlando, FL Wed., August 12, 2015 For: Late Model Rental Fleet Equipment
• Phoenix, AZ September 2, 2015 • Youngstown, OH September 2, 2015 • Polotitlan, MEX September 11, 2015
• Pittsburgh, PA Sat., August 15, 2015 For: Very Large Job Completion, Land Clearing Equipment
• Ashland, KY September 15-17, 2015
• Racine, WI Sat., August 22, 2015 For: Late Model Dump Trucks, Construction Equipment & more
• Minneapolis, MN September 18, 2015
• Atlanta, GA September 17, 2015
• Syracuse, NY Mon., August 24, 2015 For: Retirement Auction of Landscape & Irrigation Contractors
• Sacramento, CA September 22, 2015
• Houston, TX Tues., August 25, 2015 For: Late Model Construction Equipment & more from National Rental Fleets
• Kansas City, MO September 25, 2015
• Corpus Christi, TX Thurs., August 27, 2015 For: Very Late Model Construction Rental Returns
• Nashville, TN September 29, 2015
• Fort Worth, TX September 23-24, 2015
• Los Angeles, CA September 29, 2015
• Utica, NY Sat., August 29, 2015 For: Large Job Completion Auction: Construction Equipment
• Salt Lake City, UT September 29, 2015
• Middletown, NY Sun., August 30, 2015 For: Large Acquisition of Rental Company: New & Used Support Equipment & more
• Albuquerque, NM September 30, 2015
• Atlanta, GA Tues., September 1, 2015 For: Late Model Construction Equipment & more • Charlotte (York), NC Wed., September 2, 2015 For: Late Model Aggregate & Construction Equipment • Queretaro, Mexico Fri., September 4, 2015 For: Late Model Construction Equipment & more • Boston, MA September 18 - 20, 2015 For: All types of Construction Equipment & more • San Angelo, TX Thurs., September 24, 2015 For: Rental Fleet Late Model Construction Equipment • Parkersburg, WV Fri., September 25, 2015 For: Major Earthmoving & Pipeline Completion • Atlantic City, NJ Sat., September 26, 2015 For: Late Model Construction Equipment & more • Syracuse, NY Sat., October 10, 2015 For: Late Model Rental Returns of Construction Equipment & more • Rochester, NY Sat., October 17, 2015 For: Very Large Rental Returns Auction. Construction Equipment & more • Plymouth, MA Sat., October 24, 2015 For: Large Snow Equipment Auction • Manchester, NH Sat., October 31, 2015 For: Major Job Finishing Construction Equipment & more • Somerset, PA Fri., November 6, 2015 For: Job Completion Coal & Mining Equipment • Somerset, PA Sat., November 7, 2015 For: Semi-Retirement Auction – Construction Equipment • Syracuse, NY Sat., November 14, 2015 For: Late Model Rental Fleet Construction Equipment & more • Toronto, Ontario, Canada Mon., November 23, 2015 For: Very, Very Large Late Model JD Agricultural Tractors & more
RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Orlando, FL August 13, 2015 • Austin, MN August 19, 2015 • Columbus, OH August 21, 2015 • Tipton, CA August 26, 2015 • Houston, TX August 26-27, 2015 • North East, MD August 27, 2015 • Las Vegas, NV August 28, 2015
• St. Louis, MO September 29, 2015
• Salt Lake City, UT September 30, 2015
C
oming
To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com
• Mt. Sterling, KY Thurs., August 27, 2015 For: Construction Liquidation
• ONLINE ONLY August 12, 2015 • ONLINE ONLY August 19, 2015
• Fort Dodge, IA Fri., August 28, 2015 For: Concrete & Underground Contractor Equipment
J.M. WOOD AUCTION COMPANY
• ONLINE ONLY August 26, 2015
HOLLAND EQUIPMENT SERVICES
• ONLINE ONLY September 2, 2015
www.hesequipment.com 616-396-5535
• Montgomery, AL September 2 - 3, 2015 For: Trucks, Construction & Forestry Auction
• ONLINE ONLY September 9, 2015
• ONLINE ONLY Tues., August 25, 2015 For: Heavy Equipment, Truck & Trailer Auction
• ONLINE ONLY September 16, 2015
CINCINNATI INDUSTRIAL AUCTIONEERS www.cia-auction.com 513-241-9701
• El Paso, TX October 21, 2015
www.collarcityauctions.com 518-895-8150
BACKES AUCTIONEERS
• ONLINE ONLY Bidding August 1 - 14, 2015 For: Late Model Repossessed Paving Equipment & more
• Riverside, CA Sat., August 15, 2015 For: Heavy Equipment & Commercial Truck Auction • Visalia, CA Fri., August 28, 2015 For: Heavy Equipment & Commercial Truck Auction • Portland, OR Thurs., September 3, 2015 For: Heavy Equipment & Commercial Truck Auction • Sacramento, CA Sat., September 12, 2015 For: Heavy Equipment & Commercial Truck Auction
BEAZLEY AUCTIONEERS www.beazleyauction.com 800-670-1227 • Howe, TX Fri., August 14, 2015 For: Heavy Equipment, Truck & Trailer Auction
BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE ONLY August 6 - 13, 2015 For: Construction Equipment
• Rome, NY Sat., August 22, 2015 For: Used Heavy Equipment
www.hilpipre.com 319-235-6007
COLLAR CITY AUCTIONS
www.barnoneauction.com 866-372-1700
• Salt Lake City, UT Thurs., August 20, 2015 For: Used Heavy Equipment
www.bigiron.com 800-937-3558
• Wasilla, AK October 21, 2015
BAR NONE AUCTION
• Philadelphia, PA Sat., August 15, 2015 For: Used Heavy Equipment
HILPIPRE AUCTION CO.
• Raleigh-Durham, NC September 30, 2015
• Marion, IA Thurs., August 13, 2015 For: Construction Equipment
www.jjkane.com 855-GO2-KANE
BIG IRON
• Tidioute, PA Thurs., August 13, 2015 For: Public Auction / Construction Equipment
www.backes-auction.com 800-876-8070
A
uctions
J.J. KANE AUCTIONEERS
DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., September 26, 2015 For: Construction Equipment
DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277 • Pendleton, IN Fri., September 18, 2015 For: 23rd Annual Fall Auction • Cecil, OH Sat., October 17, 2015 For: 2nd Annual Fall NW Ohio Consignment Auction • Pendleton, IN Fri., December 11, 2015 For: 23rd Annual Snowball Auction
EQUIPMENT ROW.com www.equipmentrow.com 580-931-6156 • ONGOING ONLINE TIMED Construction Equipment, Trucks/ Trailers, Farm Equipment & Salvage. New items added daily!
FREY & SONS, INC. www.freyonlineauctions.com 419-455-3739 • ONLINE ONLY Ends: Wed., August 19, 2015 For: Construction Equipment
HENDERSON AUCTIONS
HUNYADY AUCTION COMPANY
www.jmwood.com 800-447-7085
www.keenanauction.com 207-885-5100 • Patten, ME Thurs., August 27, 2015 For: Forestry Equipment, Trucks & Trailers
• Blairsville, PA Thurs., August 13, 2015 For: Large Absolute Auction: Galway Bay Corp.
www.meekinsauction.com 800-499-6560
I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Foley, MN Fri., September 11, 2015 For: Heavy Equipment, Truck & Trailer Auction • Foley, MN Fri., December 4, 2015 For: Heavy Equipment
IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid! • ONLINE ONLY Thurs., August 13, 2015 For: Construction Equipment • ONLINE ONLY Thurs., August 20, 2015 For: Construction Equipment
www.rogersauctiongroup.com 800-442-7906 • Charlotte, NC Sat., September 19, 2015 For: Charlotte/Mecklenburg Rolling Stock Auction
ROLLER AUCTIONEERS www.rollerauction.com 866-515-1668 • Denver, CO Wed., September 16, 2015 For: Heavy Construction & Contracting Equipment • Denver, CO Wed., November 11, 2015 For: Heavy Construction & Contracting Equipment
RTI AUCTIONS KEENAN AUCTION COMPANY
www.hunyady.com 800-233-6898
• Ambler, PA Thurs., September 17, 2015 For: Absolute Auction Complete Liquidation Northwest Erectors, Inc.
ROGERS REALTY & AUCTION COMPANY
LLOYD MEEKINS & SONS AUCTION COMPANY • Lumberton, NC Tues., August 18, 2015 For: Contractor’s Auction of the Summer
www.teitsworth.com 585-243-1563
• Seneca Falls, NY August 13 - 14, 2015 For: Empire Farm Days Auction
SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • Windsor Locks, CT Sat., October 3, 2015 For: Construction Equipment & more
SCOTT PERRY & CO. MARTIN & MARTIN AUCTIONEERS, INC.
www.scottperryco.com 716-283-7653
www.mmaauction.com 864-947-7888
• Hornell, NY Wed., August 19, 2015 For: NYS Dept. of Transportation
• Pelzer, SC Wed., August 26, 2015 For: Trucks, Trailers, Equipment, Misc.
• Castile, NY Thurs., August 20, 2015 For: NYS Office of Parks & Recreation
MOTLEY’S AUCTION GROUP www.motleys.com 804-232-3300 • ONLINE ONLY August 21 - 26, 2015 For: Support Tools & Equipment
STANLEY J. PAINE AUCTIONEERS www.paineauctioneersonline.com 617-731-4455
• Richmond, VA Tues., August 25, 2015 For: Construction Equipment & Trucks
• Manchester, NH Wed., August 12, 2015 For: Construction Equipment Job Completion Auction
PETROWSKY AUCTIONEERS INC.
STEFFES GROUP INC.
www.petrowskyauctioneers.com 860-642-4200
www.steffesgroup.com 701-237-9173
• Cambridge, OH Thurs., August 13, 2015 For: Major Heavy Equipment & Truck Auction
• Litchfield, MN Thurs., September 3, 2015 For: Aglron Event
• ONLINE ONLY Thurs., August 27, 2015 For: Construction Equipment
• Cadiz, OH Thurs., August 20, 2015 For: Equipment Dispersal Auction for CBC Pipeline, LLC
THOMPSON AUCTIONEERS, INC.
• ONLINE ONLY Thurs., September 3, 2015 For: Construction Equipment
• Williamstown, NJ Fri., September 18, 2015 For: Major Equipment Auction for Company Wrench & Area Contractors & Dealers
• Englewood, OH Thurs., August 13, 2015 For: Public Auction Construction Equipment
PURPLE WAVE AUCTION
THOMAS HIRCHAK COMPANY
www.purplewave.com 866-608-9283
www.THCAuction.com 800-634-7653
• ONLINE ONLY Thurs., August 13, 2015 For: Construction Equipment
• Morrisville, VT Thurs., September 17, 2015 For: Heavy Equipment Auction
• ONLINE ONLY Tues., August 18, 2015 For: Truck & Trailer Auction
UTILITY AUCTIONS
• ONLINE ONLY Thurs., September 10, 2015 For: Construction Equipment • ONLINE ONLY Thurs., September 17, 2015 For: Construction Equipment • ONLINE ONLY September 24-25, 2015 For: Construction Equipment
JAMES G. MURPHY INC. AUCTIONEERS
www.thompsonauctioneers.com 937-426-8446
• ONLINE ONLY Thurs., August 27, 2015 For: Construction Equipment
www.utilityauctions.net 302-530-9103
www.hendersonauctions.com 225-686-2252
www.murphyauction.com 800-426-3008
• Carencro, LA September 16-17, 2015 For: 2 Day Fall Contractor’s Auction
• Kenmore, WA Sat., October 3, 2015 For: Heavy Equipment & Contractors Auction
• ONLINE ONLY Thurs., September 3, 2015 For: Manhattan Pipeline LLC Equipment Auction
• Wilmington, DE Fri., August 28, 2015 For: Public Auction: Construction, Utility & Forestry Equipment
• ONLINE ONLY August 20 - 27, 2015 For: Construction Equipment
• Livingston, LA November 11-12, 2015 For: 2 Day Winter Contractor’s Auction
• Kenmore, WA Sat., December 5, 2015 For: Heavy Equipment & Contractors Auction
• ONLINE ONLY Thurs., September 22, 2015 For: Truck & Trailer Auction
WAYNE PIKE AUCTION COMPANY
• ONLINE ONLY August 27 - Sept. 3, 2015 For: Construction Equipment
HESS AUCTIONEERS
JEFF MARTIN AUCTIONEERS, INC.
QUANTOS AUCTIONS
• ONLINE ONLY August 13 - 20, 2015 For: Construction Equipment
www.hessauctioneers.net 866-511-2493
www.jeffmartinauctioneers.com 601-450-6200
• Marietta, PA Fri., August 21, 2015 For: Truck, Trailer & Equipment
• Calera, AL Sat., August 15, 2015 For: Farm & Construction Equipment and more
• ONLINE ONLY September 17 - 24, 2015 For: Heavy Equipment
HILCO INDUSTRIAL, LLC
• Midland/Odessa, TX Wed., September 16, 2015 For: Fall Permian Basin Absolute Auction
• ONLINE ONLY September 24 – October 1, 2015 For: End of Season Rental Sale
• ONLINE August 12 - 20, 2015 For: Generac Industrial Power
• ONLINE ONLY September 3 - 10, 2015 For: Construction Equipment • ONLINE ONLY September 10 - 17, 2015 For: Aerial Equipment
www.hilcoind.com 877-37-HILCO
• Harvey, LA Wed., September 23, 2015 For: One Owner Absolute Silverton Construction, LLC
www.waynepikeauction.com 763-389-2700
www.quantosauctions.com 253-236-8555
• Princeton, MN Sat., September 12, 2015 For: Heavy Equipment
• ONLINE ONLY August 18-20, 2015 For: Online Public Auction Construction Equipment
• Princeton, MN Sat., December 5, 2015 For: Heavy Equipment
RITCHASON AUCTIONEERS INC.
WOLFE INDUSTRIAL AUCTIONS, INC.
www.ritchason.com 800-806-3395
www.wolfeauctions.com 800-443-9580
• Lebanon, TN Sat., September 12, 2015 For: Construction Equipment
• Frederick, MD Sat., August 22, 2015 For: Northern MD Contractors Auction
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 133
McCarthy Enters New Agreement With NoteVault NoteVault, a provider of voice-to-text-based mobile reporting solutions for the construction industry, announced that McCarthy Building Companies Inc. has signed a multiyear, multi-user enterprise agreement. The firm, recognized as one of the largest commercial construction companies in the United States, will leverage NoteVault’s mobile daily reports technology platform to increase transparency and productivity across projects throughout the United States. “We’re standardizing our daily reporting software to NoteVault in order to get greater visibility into our projects and to receive real-time notification of happenings on the job
“We have a long-standing relationship with McCarthy and have been by their side on numerous projects over the years.” Ken May NoteVault
site. We evaluated several software providers and found that NoteVault was by far the best in class and offered significant advantages for our onsite team and clients,” said Michael Oster, vice president/CIO information technology of McCarthy McCarthy, one of the oldest construction companies in the United States, was founded in 1864 and provides end-to-end workflow solutions—from preconstruction through completion. “We have a long-standing relationship with McCarthy and have been by their side on numerous projects over the years. We are pleased that they have decided to use NoteVault companywide,” said Ken May, NoteVault CCO. “With this enterprise agreement, McCarthy will now benefit by using NoteVault on all of their projects”. McCarthy workers will use the NoteVault Notes application on their mobile device enabling them to quickly dictate notes and photos into the customizable daily report template. They also can edit their notes and add comments to other team member’s notes directly within the app. NoteVault’s professional staff transcribes these voice recordings into text, adds the related photos and sends out daily PDF reports to the customer’s team every morning. Depending on their user role, key stakeholders can also view notes on their device from all users in a continuous newsfeed that gives them real-time access to events as they happen. This reduces delays and increases productivity. Categories and issues can be tagged within the app, and GPS tagging of location is automatic to enable quick pinpointing of where a note was taken. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
29
Important Auctions
www.lyonauction.com www.lyonauctionlive.com
AUCTION CALENDAR 1.
Wednesday, August 12: ORLANDO, FLORIDA: Late Model Rental Fleet Equipment: Cat, Komatsu, John Deere, Bomag, AerialLifts, Forklifts, Attachments, Support, Trucks & Trailers. 2. Saturday, August 15: PITTSBURGH, PENNSYLVANIA: Very Large Job Completion. Land Clearing Equipment: Log Skidder, Hydro-Axes, Small & Large Chippers plus Normal Construction Equipment, Truck Tractors, Cat 320E, Cat 312E, Cat 311. 3. Saturday, August 22: RACINE, WISCONSIN: (70) Truck Tractors, Late Model Dump Trucks, Articulated Haul Trucks, Pickups, Construction Equipment, Aerials, Forklifts, Attachments, Support Equipment. 4. Monday, August 24: SYRACUSE (LAKEPORT), NEW YORK: Retirement Auction of Landscape & Irrigation Contractors. HILITES INCLUDE: Landscape Construction Equipment, Midi Excavators, Skid Steers, Crawler Tractors, Utility Tractors, Trenchers, Commercial Mowers, Attachments, Dump Trucks, Pickups, Snow Equipment, Irrigation Inventory and Parts, Large Quantity of Support Equipment, Utility Carts & More. 5. Tuesday, August 25: HOUSTON, TEXAS: Late Model Construction Equipment ( Cat, John Deere, Komatsu), Aerials from Several National Rental Fleets, Attachments, Support, Trucks & Trailers. 6. Thursday, August 27: CORPUS CHRISTI, TEXAS: Very Late Model Construction Rental Returns. HILITES: Telescopic Forklifts, Warehouse Forklifts, Boom & Scissor Lifts, Air Compressors, Welders, Light Plants, Support, Crawler Tractors, Rubber Tired Loaders, Loader Backhoes. 7. Saturday, August 29: UTICA, NEW YORK: Large Job Completion Auction: (2) P&H Cranes (90T), Hydraulic Excavators, Rubber Tired Loaders, Loader Backhoes, Crawler Tractors (Cat D8K ripper), Forklifts, Dump Trucks, Stake Trucks, Trailers, Support Equipment. 8. Sunday, August 30: MIDDLETOWN (FLORIDA), NEW YORK: Large Acquistion of Rental Company Featuring Very Large Quantity of New & Used Support Equipment, Large Quantity of Tagalongs, Midi Excavators, Skid Steers, Loader Backhoes, Loaders, Air Compressors, Telescopic & Warehouse Forklifts, Boom & Scissor Lifts and MORE! 9. Tuesday, September 1: ATLANTA, GEORGIA: Late Model Cat, John Deere Construction Equipment, Aerials, Forklifts, Attachments, Support, Trucks & Trailers. 10. Wednesday, September 2: YORK, SOUTH CAROLINA (CHARLOTTE NORTH CAROLINA AREA): Former Estate Liquidation. Late Model Aggregate & Construction Equipment, Aerials & Telescopics, Support, Attachments. Real Sharp Equipment. (Low Houred) 11. Friday, September 4: QUERETARO, MEXICO: Late Model Cat. Komatsu, Case, Dynapac Earthmoving Equipment, Forklifts, Aerial Lifts, Attachments, Trucks & Trailers. 12-14. Friday, September 18 - Sunday, September 20: BOSTON (SALEM), MASSACHUSETTS: 3 DAY AUCTION!! 60 Year old Collection of Horse Tack (the best!), Horse Carriages, (20) Horses, All Types of Construction Equipment, Cranes, Welders. Enormous Amount of Support Equipment, Large Quantity of Cars for Parts and Scrap Boxes.. PLUS MUCH MORE!! ** SPECIAL: 10 ACRES OF PRIME REAL ESTATE. 15. Thursday, September 24: SAN ANGELO, TEXAS: Rental Fleet Auction. Late Model Construction, Compact Rental Fleet
follow @Lyo
us on
nAuc
tion!
Equipment. Hilites: Telescopic Forklifts, Crawler Tractors, Tractor Loader Backhoes, Rubber Tired Loaders, Boom & Scissor Lifts, Skid Steers, Crawler Tractors, Attachments, Support, Trucks & Trailers. 16. Friday, September 25: PARKERSBURG, WEST VIRGINIA: Major Earthmoving & Pipeline Completion. Late Model Cat, John Deere, Earthmoving Equipment, Pipelayers, plus Aerial & Forklifts, Generators, Light Plants, Air Compressors, All Typers of Trucks: Truck Tractors, Dump Trucks, Pickups, Service Trucks, Equipment & Dump Trucks. 17. Saturday, September 26: ATLANTIC CITY, NEW JERSEY: Late Model Cat, John Deere, Komatsu Earthmoving Equipment: Boom & Scissor Lifts, Forklifts, Dump Trucks, Truck Tractors, Trailers, Support Equipment. 18. Saturday, October 10: SYRACUSE, NEW YORK: Late Model Rental Returns of Construction Equipment, Scrap Handling, Aerial Lifts, Forklifts, Asphalt & Vibratory Rollers, Truck Tractors, Dump Trucks, Trailers & More. 19. Saturday, October 17: ROCHESTER, NEW YORK: Very Large Rental Returns Auction. Construction Equipment, Aerials, Forklifts, Trucks & Trailers, Attachments, New Support. 20. Saturday, October 24: PLYMOUTH, MASSACHUSETTS: Large Snow Equipment Auction: Snow Trucks, Construction Equipment, Attachments, Support, Trucks & Trailers, Quantity of Rubber Tired Loaders. 21. Saturday, October 31: MANCHESTER, NEW HAMPSHIRE: Major Job Finishing of Several Jobs at Once. HILITES: A Major Well Drilling Company to include: a SOILMEC R312 Drill, Several Water Drills, All Types of Water Drilling Equipment, Plus Trucks, Trailers & Normal Construction Equipment. 22. Friday, November 6: SOMERSET, PENNSYLVANIA: Job Completion of Coal & Mining Equipment, Cranes, Trucks Trailers, Support Equipment & Attachments. 23. Saturday, November 7: SOMERSET, PENNSYLVANIA: Semi-Retirement Auction. Construction Equipment, Aerials, Forklifts, Support, Attachments, Truck Tractors, Dump Trucks & Straight Trucks. 24. Saturday, November 14: SYRACUSE (CANASTOTA), NEW YORK: Late Model Rental Fleet Construction Equipment, Aerials, All Types of Forklifts, Attachments, New & Used Support Equipment, All Types of Trailers & Trucks. 25. Monday, November 23: TORONTO (NORWICH), ONTARIO, CANADA: Very,Very Large Late Model Primarily John Deere Late Model Agricultural Tractors, Plus a Large Amount of All Kinds of Tillage, Hay & Harvesting Equipment. 26. DTBA: TUSCALOOSA, ALABAMA: Large Construction Auction. Aggregate Equipment, Truck Tractors, Dump Trucks, Support & Attachments, Aerial Lifts, Forklifts. 27. DTBA: LONG ISLAND, NEW YORK: Late Model Midi Size Construction Equipment, Aerials, Trucks & Trailers, Large Amount of Support Equipment & Attachments. 28. DTBA: DALLAS (FT. WORTH), TEXAS: 2 AUCTIONS IN ONE DAY! Rental Returns of Late Model Construction Equipment,Aerial Lifts, Forklifts, Trucks, & Trailers. Plus a Recent Job Completion: Group of Late Model Cat & Doosan Equipment. 29. DTBA: CLEVELAND, OHIO: Rental Return Construction Equipment: Aerials, Forklifts, Support Equipment, Trucks & Trailers.
www.lyonauction.com
Page 134 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
1-OWNER AUCTION EQUIPMENT DISPERSAL AUCTION for CBC SERVICES, INC. (Ohio Division) 38055 CADIZ PIEDMONT ROAD, CADIZ, OH 43907
THURSDAY, AUGUST 20, 9AM
PARTIAL LISTING: PIPELAYERS: (2) 2012 Cat 72H w/Vanguard Sideboom; 2008 Deere 850J LGP w/Midwestern M572C Sideboom; 2007 Deere 700J LGP w/Midwestern M540C Sideboom; 2006 Cat D4G LGP w/Midwestern Little Boomer Sideboom; 2006 Deere 700LGP w/Midwestern M540C Sideboom; 2006 Cat 561N w/Pullmaster Winches; 2005 Cat 561N w/Pullmaster Winches; 1998 Cat D6M LGP w/Midwestern M550CH Sideboom; TACK CRAWLER TRACTORS: 2005 Cat D6NXL w/Generator & Welder Bank; 2014 Vermeer D330X500 Horizontal Drill; 2013 Vermeer R9X12T Tri/A Drill Fluid Reclaimer; 2011 Vermeer SA400 w/Weatherford T425 High Pressure Pump; (Being Sold Subject to Owner Confirmation) DIRECTIONAL DRILLS: 2012 Vermeer D100X120 Series II w/Aplex Mud Pump; Ditch Witch JT3020 Horizontal; DIRECTIONAL DRILL ATTACHMENTS: Inventory of Drill Attachments & Accessories, including: Cones; Reamers; Fire Sticks I & II; Bukup; Bull Tongs Mdl CH116; Mincon HDD90; Straightline AHV2; IF; Sonde; Full Hole; Swivels; BORING MACHINES: 2013 Bor-It 30; SPECIALIZED DRILLING & PIPELAYING EQUIPMENT: Midwestern HTU500 Hydraulic Test Unit; MUD MIXERS: 2007 Vermeer MX240; MUD RECLAIMER: 2011 Mud Technology TP10550; EXCAVATORS: (3) 2012 Cat 336EL; (3) 2012 Komatsu PC360LC-10; (3) 2011 Komatsu PC200LC-8 HH;; 2009 Cat 320DL; 2008 Cat 320DL; 2007 Cat 324DL; 2007 Cat 320D LRR; 2006 Cat 320C; 2004 Cat 322C; TRACTOR LOADER BACKHOES: 2007 Cat 420E; CRAWLER TRACTORS: 2013 Komatsu D65WX-17 w/Allied H6H Winch; 2012 Cat D6T LGP w/Allied W6G Winch; 2011 Komatsu D51PX-22; 2010 Cat D8T w/Allied w/2E Winch; 2010 Cat D6T LGP w/Allied W6G Winch; 2009 Cat D6N LGP w/Paccar Winch; TRACKED DUMPS: 2012 Morooka MST1500V0; Morooka MST800F; Morooka MST500; Morooka MST700; Morooka; (3) IHI IC50s; MINI TRACK STEERS: 2013 Vermeer S650TX w/Vermeer STR48 Trencher Attachment; TRENCHERS: 2013 Vermeer RTX100; 2008 Vermeer T655111TR; PIPE HANDLING SYSTEMS: (4) 2012 Vacuworx RC10s; Vacuworx MC3B; MANY LOTS OF VARIOUS VACUUM PAD ATTACHMENTS (Fits Vacuworx Pipe Handling Systems); PIPE BENDERS: (2) Darby 620 S/A; FORESTRY EQUIPMENT: 2008 Rayco C140 Mulcher; Fecon FTX440 Mulcher; FORKLIFTS: 2005 Skytrak 6036 Telescopic Rough Terrain; BUCKETS & ATTACHMENTS: 2013 Atlas Copco MB1700; (2) 2011 Allied AR170C; (3) Magnum MM154; Rayco SC130; (2) Werk Brau; 6x6 TRUCKS: 1997 Am General M813 T/A Flatbed Truck; 1991 Oshkosh F1840 Flatbed Truck; 1989 Oshkosh Flatbed Truck; 1984 Am General
M931 T/A Tractor; 1984 Am General M931 T/A; 1978 Am General T/A; 1976 Am General M49A2C T/A Fuel Truck; 1974 Am General M35A2 Flatbed Truck; 1974 Am General M35A2 Flatbed Truck; 1970 Am General M Series T/A Tractor; 1970 Am General M36 T/A Flatbed; 1969 Am General M35A2 T/A Flatbed; 1969 Jeep M35 T/A; TRUCK TRACTORS: 2009 Kenworth T800B T/A; 2007 Kenworth T800B T/A; 2007 Kenworth T800B T/A; 2000 Mack CH613 T/A; 2000 Mack CH613 T/A; 1998 Mack CH613 T/A; ROLL BACK TRUCKS: 2000 Int’l 4700 S/A; FLATBED TRUCKS: (8) 2013 Chevy 3500HDs; (3) 2009 Chevy 3500HD; 2007 Chevy 3500HD; 2006 Chevy C4500; WELDING TRUCKS: 2006 Chevy 3500; FUEL & LUBE TRUCKS: 2001 Freightliner FL70 S/A Lube Truck; 2004 Freightliner Business Class M2 Fuel Truck; MAT TRUCKS: 2005 Peterbilt 379 T/A; VAC TRUCKS: 1999 Mack CH613 T/A; CAB & CHASSIS: 2009 Chevy 3500HD; LOWBOY TRAILERS: 2011 Etnyre PRTN55L Tri/A; 2001 Etnyre Tri/A; 1997 Fontaine TA50NGB Tri/A; 1995 Load King 50DFM Tri/A; PIPE TRAILERS: 2013 Nabors FT T/A; 2012 Magnolia T/A; 1995 Viking V4B41 T/A; 1979 Georgia JCV040 T/A; Pitts LT40A T/A; VAC TRAILERS: Vermeer V500LE HD T/A; Ditch Witch FX30 T/A; STEP DECK TRAILERS: 1998 Lufkin FL75DF T/A; FLATBED TRAILERS: 2006 Transcraft TL2000 T/A; 1999 Fontaine T/A; 1999 Fontaine T/A; 1998 Fontaine T/A; 1995 Stoughton T/A; DRY VAN TRAILERS: 1985 Hobbs T/A; EQUIPMENT TRAILERS: 2014 Carry On S/A; 2013 Tiger 102363A7KGN Tri/A; 2013 Tiger T/A; 2013 Tiger 8320T7K T/A; 2013 Tiger T/A; 2012 Towmaster T/A; 2012 Suretrack ST81201T T/A; 2012 Big Tex T/A; 2012 Reiser T/A; 2011 Carry On S/A; 1974 Hyster C35TA T/A; Reiser T/A; Texas T/A; Tiger T/A; PICKUP TRUCKS (Some Equipped w/Fuel Cells): 2015 GMC 2500HD; (3) 2014 GMC 3500HDs; (5) 2014 GMC 2500HDs; (2) 2014 Chevy 2500HDs; 2013 Chevy 2500HD; (3) 2013 GMC 2500HDs; 2011 Chevy 2500HD; (2) 2010 Chevy 1500s; (3) 2009 Chevy 2500HDs; 2009 Chevy 1500; (3) 2008 Chevy 2500HDs; (2) 2007 Chevy 2500HDs; 2004 Chevy 1500; 2002 Ford F150; 2001 Chevy 2500; 2000 Ford F150; 2001 Ford Ranger; 2001 Dodge Dakota; 1998 Chevy 1500; 1998 Chevy S10; 1998 Ford Ranger; SUVS: 1999 GMC Yukon; 1999 Chevy Tahoe; 1997 Chevy Tahoe; BUSES: 1999 Int’l 3800; 1998 Int’l 3800; 1997 Int’l 3800; 1995 Int’l 3800; 1991 Int’l; UTILITY VEHICLES: Kawasaki 750; LIGHT TOWERS: 2013 Magnum MLT3060K S/A; COMPRESSORS: (2) Airman PDS185S; Sullair 1150XHDTQ Tri/A; Sullair 185; (2) Speedaire; WELDERS: (4) Miller Big Blue 350 Pipe Pro DC Welding Generator; Miller Bobcat 225; Miller Pipe Pro 304; Lincoln Ranger 8; TANKS: (2) 1,000 Gal Steel Skid Tanks; STRAW BLOWERS: (2) Finn B70T-41 S/A; FUSION UNITS: McElroy Tracstar 412; McElroy 412; SUPPORT EQUIPMENT: Over 100 Lots & MUCH MORE!
AUCTION NOTE The owners of CBC Services, Inc. have decided to liquidate all of their Ohio assets. Therefore, they have commissioned Petrowsky Auctioneers, Inc. to sell at public auction a vast inventory of large equipment and trucks. Mark your calendars!
MAJOR EQUIPMENT AUCTION With Equipment From
COMPANY WRENCH & OTHER AREA CONTRACTORS & HEAVY EQUIPMENT DEALERS Hosted by Company Wrench at their NJ Location: 2636 SOUTH BLACK HORSE PIKE, WILLIAMSTOWN, NJ 08094
FRIDAY, SEPTEMBER 18, 9:30AM INVENTORY OF NEW & USED DEMOLITION, SCRAP HANDLING & EXCAVATION EQUIPMENT, ATTACHMENTS, TRUCKS & TRAILERS Currently Accepting Consignments Petrowsky Auctioneers, Inc. & Company Wrench, renown in their respective industries, are proud to announce the scheduling of a major equipment auction to be conducted at the newly renovated Company Wrench Equipment Sales & Service Facility in Williamstown, New Jersey.
This exciting event not only offers a day of auction opportunities, but also pre-auction day Open House & Grand Opening on Thursday, September 17th. The Grand Opening festivities will start at 8 AM with a continental breakfast followed by a barbecue lunch at 11:30 and ribbon cutting at noon. The day’s activities will include equipment demonstrations, new equipment sales & parts discounts for auction registrants, door prizes, giveaways and more.
TERMS: Complete payment or a minimum requirement of 20% deposit day of sale in Cash, Certified Check or Guaranteed Funds. Balance due within 4 days. OH License #2002000176, Firm #2002000177 ONLINE BIDDING THROUGH EQUIPMENTFACTS CALL FOR INFORMATION AND PICTURE BROCHURES
Salt Lake City, UT (801) 355-4500 Wharton, NJ (973) 659-3330 Milford, NH (603) 672-4100
275 Route 32, North Franklin, CT 06254, (860) 642-4200, Fax: (860) 642-7900
www.petrowskyauctioneers.com
Columbus, OH (614) 444-4300 Providence, RI (401) 455-0200 Boston, MA (617) 427-8888
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 135
WEEKLY ONLINE
AUCTIONS HUNDREDS HUNDREDS OF INSPECTED AND GUARANTEED GUARANTEED ITEMS FOR FOR SALE SALE UPCOMING UPC OMING A AUCTIONS UCTIONS EVER EVERY Y THURSD THURSDAY AY
August A ugust 13, 20 20,, 2 27 7 | September September 3, 10, 10, 17, 17 7,, 24-25 24-25
EXCAVATORS EX CAVATORS
CRAWLER TRACTORS CRA WLER TRA CTORS
MOTOR MO TOR SCRAPERS
B ACKHOE L OADERS BACKHOE LOADERS
MO MOTOR TOR GRADERS
CRANES
LOADERS WHEEL L OADERS
TELEHANDLERS
OFF-RO AD TRUCK S OFF-ROAD TRUCKS
The best way to buy and sell used equipment. Period. Period. FAMILY F AMIL LY OF BRAND BRANDS S
www.ironplanet.com 866-945-8441
Page 136 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Hewden Auction Brings Lots to Proxibid Marketplace TRUCK, TRAILE RAILER R & EQUIPMEN QUIPMENTT AUC UCTION UCTIO TIO ON
Friday, Frid ayy, August August 21st 21sstt 9:00 9::00 9 00 AM AM Marietta, M Marietta arietta, PA PA
Don’tt Miss Th is Sale!
CON ONSTRUCTION O NS STTR RU UC CTION ION - MAT ATERIAL A TEERIA RIAL IAL HAN ANDLING A NDL DLIN LING - AG GRICULTURE RICU R ICULLT LTURE - MORE ORE
TRAC RACTORS RA AC CTORS, TRUCK RUCKS KS, DUMPS PS S, TRAILE RAILERS RA AILLEERS RS S, PICKUPS ICK KUP PS, SEERV ERVICE RV RVICE VICE TRUCK RUCKS KS, TOYS OYYS LLI LIKE IKE KE RVS, GAT ATORS A TORS OR RS, GOLF OLLF CAR ARTS A RTS, ETTC C SAVE the DATE August 21st Bid Online or On-Site!
1-866-511-2493
www.HessAuctioneers.net www ww www.HessAu ww w.HessA sAu ucttioneerss.net uctioneers.net E Email: mail: S Sales@HessAuctioneers.com ales@HessAuctioneers.com A Auction uction S Site: ite: 1451 R River iver R Rd. d. M Marietta, arietta, PA PA 17547 PA P AA Auction Auc uction C Co. o. # AY2025/AH1856/VB1159 AY2025/AH1856/VB1159
NORTHERN MD CONTRACTORS AUCTION Saturday, August 22nd @ 9:00 AM 9801 Hansonville Rd Frederick MD 21702
http://www.wolfeauctions.com
Proxibid will provide online bidding for Thimbleby & Shorland’s upcoming Hewden August Auction, the largest auction of its kind in the United Kingdom. The auction will be held on Aug. 12. Buyers in America and around the world can participate in this great opportunity to purchase high quality equipment by bidding online at www.proxibid.com/hewden. The Hewden Auction is Europe’s largest direct from user auction event, selling all types of ex-rental machinery and cranes owned and operated from new by Hewden. The Hewden Auction is now more than 10 years old, and has become a “not to be missed” date in the auction fixtures calendar. The sale will feature more than 275 lots of high quality equipment, and bidders online will partake in the same onsite experience they can expect from The Hewden Auction.
(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Would you like your company featured in Construction Equipment Guide? If so, please contact us at:
editorial@cegltd.com
P
T
WILL BE SELLING – Crawler Loaders, Dozers, Hyd Excavators, Loader Backhoes, Rubber Tired Loaders, Skidloaders, Forklifts, Rd Tractors, Dumps, Flatbeds, Cab&Chassis, Box Trks, Specialties, Utilities, Pickups, Vans & Trailers Plus much more…
Like on
SALE CONDUCTED BY
301-898-0340 • 800-443-9580 9801 Hansonville Rd • Frederick, MD 21702
Featured items include: • (10) 2008 Caterpillar TH407 • (14) 2008/9 Caterpillar TH414 • (3) 2004/7 JCB 540/170 • (9) 2007/9 Caterpillar 320DL Proxibid’s risk management system is designed to manage high dollar transactions like that of the equipment available in this auction, ensuring buyers are safe when purchasing online. Only Proxibid can boast a 0.15 percent non-pay rate, meaning sellers get paid at the end of the auction. Proxibid offers the most robust technology solution in the industry, with 99.9+ percent uptime to make certain buyers never miss an opportunity to secure inventory they want, how they want, according to the company.
ccc{ O]PG <G ;G >{ <RO
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 137
RACINE (STURTEVANT), WI LATE MODEL DUMP TRUCKS, 70+ TRUCK TRACTORS ARTICULATED HAUL TRUCKS, PICKUPS CONSTRUCTION EQUIPMENT AERIALS, FORKLIFTS, ATTACHMENTS, SUPPORT EQUIPMENT.
AUCTION
NOTE: Selling in this sale will be late model construction equipment, attachments, support equipment and a large group of truck tractors, dump trucks & trailers. EARLY HILITES: 72 TRUCK TRACTORS: 2012-(5) 2010 Peterbilt 384 (t/a), 2009-(5) 2006-2005-(5) 2004 Peterbilt 385 (t/a), 2010 Peterbilt 384 (t/a), 2004-2002 Peterbilt 379 (t/a), 2011 Kenworth T660, 2005-2001-2000 Kenworth T800 (t/a), (9) 2010-(2) 2009-(5) 2008-2007 Volvo (t/a), 2002-(3) 2001 Volvo VNM64T (t/a), (4) 2007–(2) 2002 Freightliner FLD120 (t/a), (2) 2007-2006 Freightliner Classic (t/a), 2004-2003 Freightliner Columbia (t/a), 2007-20042003 Int’l 9400I (t/a), 2006-(2) 2005 Int’l. 9200I (t/a), 2004-2003-2002-1995 Int’l. 9200 (t/a), 2003 Int’l. 8600 (t/a), 2006 Int’l. 2900 (t/a), 2007 Western Star (t/a), 2005 Western Star 4900 (t/a), 2004 Sterling AT9500 (t/a), 5 DUMP TRUCKS: 2008 Freightliner M2, 2006 Freightliner Classic, 2003 Mack CV713, 2000 Peterbilt 357, 2000 Chevy C6500, 8 ARTICULATED HAUL TRUCKS: 2005 Terex TA40 (6x6), (7) Terex TA40 (6x6), 3 HYDRAULIC EXCAVATORS: Cat 330BL, 2007 Cat 321CLCR (aux. hydr.), 2005 Cat 315CL, RUBBER TIRED EXCAVATOR: 2008 Volvo EW180C, EXCAVATOR BUCKET: 30in., PULL PAN: Kukudo 23SB, INTEGRATED TOOL CARRIER: 2005 Cat IT62G, 10 RUBBER TIRED LOADERS: 2009 Volvo L60, (3) 2012 Volvo L50G, (2) 2012 Volvo L30B, Volvo L120C, Cat 924F, 2005 NH LW190B, NH LW130TC, CRAWLER TRACTOR: JD 850BLT, 2 TRACTOR LOADER BACKHOES: 2007 Cat 420E, 2007 Volvo BL60, 2 VIBRATORY ROLLERS: (2) New Unused Dynapac CA2500D, RUBBER TRACKED SKID STEER: 2011 JD 323D, 9 SKID STEERS: (5) 2015 Case SV250 (cab), 2012 Case SR250, 2015 Case SR160 (cab), 2012 Cat 236B3, 2012 Bobcat S205, 3 TELESCOPIC FORKLIFTS: 2005 Lull 1044C-54 Series II, (2) 2008 Lull 944E, 9 BOOM LIFTS: 20092008 JLG 800AJ (4x4), 2008 JLG 600S (4x4), JLG 600SJ (4x4), (2) JLG 600S (4x4), JLG 400S (4x4), (2) Snorkel TB60 (4x4), 4 SCISSOR LIFTS: 2008 Skyjack SJ8850 (4x4), 2009 Skyjack SJ7135 (4x4), (2) 2008 Hy-Brid HB-1030, 7 AIR COMPRESSORS: (6) 2011 Kaeser 210CFM, 2008 Sullair 375DPQ, 14 LIGHT PLANTS: (7) 2007-(4) 2006-2005 Amida AL4060D-4MH, 2006-2005 IR Lightsource, VACUUM SLUDGE SPRAYER TRUCK: Ag-Chem Ag-Gator (4x4), SLUDGE VACUUM TANK: 13,000G, VAN TRUCK: 2008 Int’l 4300 (s/a), SERVICE TRUCK: 2014 Kenworth T270 (10 ton crane), 2 FLATBED TRUCKS: 2004 Int’l 4400, 2004 Ford F750XL, 2 CAB & CHASSIS: 1997 Chevy C7500, 1987 Ford LTS9000, 2 DETACHABLE GOOSENECK TRAILERS: 1999 Trailking 50T (tri), Rogers 50T (tri), 3 EQUIPMENT TRAILERS: 2001-2000 Trailking TK70HT-482 (t/a), 2000 Ledwell Hydratilt (t/a), TIPPER TRAILER: 2006 East (t/a), 2 WALKING FLOOR TRAILERS: 2002-2001 J&J (t/a), DUMP TRAILER: Fruehauf (t/a), UTILITY VEHICLE: Kubota RTV900, 20 CONTAINERS: (12) 40ft., (8) 20ft., 2 STORAGE BUILDINGS: 2015 30ft.x65ft.x15ft, 2015 20ft.x30ft.x12ft., 7 PARTY RENTAL SUPPLIES: 2015 20FT.X40FT. Full Closed Tent, (2) 2015 16ft.x22ft. Marquee Tent, 16ft.x22ft. Marquee Tent, (3) 2015 10ft.x20ft. Commercial Instant Pop Up Tent, ROAD PLATE, 15 TIRES: (11) Sets of 4 of 295/75R22.5, Set of 4 of 285/75R24.5, (2) Sets of 4 of 275/80R22.5, Set of 4 of 11R24.5, ATTACHMENTS: Skid Steers: Smooth, Snow & Mulch Buckets, 60in.- 78in. Buckets, New Versatech Grapple Buckets, New Versatech Hay Spears, New Pallet Forks, New Fork Frames, New Versatech Brush Grapples, New Stump Buckets, NEW SUPPORT EQUIPMENT: New Mustang LF88 Plate Compactor, New Mustang MP4800 2in Submersible Pump, New Mustang CV3500 Concrete Vibrator, New 4 Pack 10lb. Ratchet Straps, New 3pc. 14in. Premium Diamond Blades, New Huskie 11218SDS Hammer Drill, New Huskie B65 Jack Hammer, New Stiff Neck Pintle Hitch, New 1in. Drive Air Impact Wrench, New 1/2in. Drive Aim Impact Wrench Kit, New 2in. x 50ft. Discharge Water Hose, New 3pc. Air Spray Gun Kit, New Auto Darkening Welding Helmet, New 3/8in. x 50ft. Automatic Air Hose Reel, New 5 Ton Digital 4ft. x 4ft. Platform Scale, New 3/4in. x 50ft. Jack Hammer Air Hose, SUPPORT EQUIPMENT: Huskie Hammer Drill. DIRECTIONS: From General Mitchell Int’l Airport in Milwaukee: (approx. 20 min.), take I-94S to Exit 333, Hwy 20. Proceed to East Frontage Rd., go South to auction site on left. From Chicago O’Hare Field: (approx. 45 min.), take I-294 N to I-94 N. Proceed to Exit 333, Hwy 20E, continue to East Frontage Road.
Address: 1755 S. E. Frontage Road, Sturtevant, WI 53177. SITE PHONE: 262-886-2778, (262) 903-6269, SITE FAX: 262-886-2369 REGISTERED WI AUCTION FIRM: #223-053 Alex Lyon & Son, Sales Managers & Auctioneers, Inc. REGISTERED WISCONSIN AUCTIONEER: #1878-052 Jack Lyon
SATURDAY, AUGUST 22 @ 9:30 AM
SYRACUSE (LAKEPORT), NY
***AFTERNOON AUCTION!*** RETIREMENT AUCTION Bushnell Nursery LANDSCAPE CONTRACTORS LANDSCAPE CONSTRUCTION EQUIPMENT, MIDI EXCAVATORS, SKID STEERS, CRAWLER TRACTORS, UTILITY TRACTORS, TRENCHERS, COMMERCIAL MOWERS, ATTACHMENTS, DUMP TRUCKS, PICKUPS, SNOW EQUIPMENT, LARGE QUANTITY OF SUPPORT.
AUCTION
NOTE: The owners of Bushnell Nursery have reached the decision to retire and enjoy life another way.
HILITES: 3 CRAWLER TRACTORS: JD 450HLT, JD 450C, JD 450E, 3 HYDRAULIC EXCAVATORS: Cat 315CL, Cat 303CR, Takeuchi TB135, 5 TRACTOR LOADER BACKHOES: 2009 JD 310 Super J, JD 310C (4x4), JD 210C, Ford 655A, Ford 555D (4x4), 3 SKID STEERS: 2013 Gehl, Bobcat 873, JD 260, 2 MINI TRACK LOADERS: (2) Toro TX420, TRENCHER: Davis P57WS23, SCISSOR LIFT: 2007 JLG 2030ES, WELDER: Miller Milleratic 185, LIGHT PLANT: 2007 IR Light Source, 2 TRACTOR LOADERS: 2014 NH Boomer 24 (4x4), Kubota L4310 (4x4), 9 COMMERCIAL MOWERS: (2) Toro Proline 44, Toro 30288, (3) Ferris, JD 318, Jacobsen HF5, Exel 602D Mower 6x6, 2 UTILITY TRACTORS: Kubota B7300 (4x4), Kubota L3600DT (4x4. backhoe), 3 AGRICULTURAL TRACTORS: 2008 JD 3520 MFWD, JD 850, NH 3930, TRACTOR ATTACHMENTS: Int’l. 4 bottom plow, Woods 6ft. Mower, Brillion GLP-642 6ft. Seeder, Landscaper 6 Professional Seeder, Pull Behind Tractor Seeder, Buffalo 8ft. Box Blade, Blanton B600 6ft. Disc, 6ft. Power Rake, Landscape rake, 7ft. Box Blade, 3ft. 6in. Blade, ATI 805-800-600A Preseeders, STRAW BLOWER: ProChopper 13hp, DUMP TRUCK: Int’l. 4900 (s/a), 2 PICKUPS: 2002 Ford F350XL (4x4), 1999 Chevy 2500 (4x4), SNOW PLOWS & SPREADERS: Boss 7ft. 6in. Snow Plow, Boss Power V Snow Plow, AUTOMOBILE: Chevy Impala, GOLF CART: Yamaha Golf Cart, RECREATIONAL VEHICLE: Four Wheeler, 2 TAGALONG TRAILERS: 2014 Currahee 18ft. (t/a), 1996 Trailking (t/a), TIRES: (4) 10x16.5 Solideal Xtra-Wall, PRESSURE WASHER: 2000PSI, 2 PALLETS OF STONES: (2) Assorted blue, ATTACHMENTS: Skid Steers: Smooth, Snow & Mulch Buckets, 60in.- 78in. Buckets, New Versatech Grapple Buckets, New Versatech Hay Spears, New Pallet Forks, New Fork Frames, New Versatech Brush Grapples, New Stump Buckets, NEW SUPPORT EQUIPMENT: New Mustang LF88 Plate Compactor, New Mustang MP4800 2in. Submersible Pump, New Mustang CV3500 Concrete Vibrator, New 4 pack Ratchet Straps, New 3pc. 14in. Premium Diamond Blades, New Huskie B65 Jack Hammer, New Huskie 11218SDS Hammer Drill, New Stiff Neck Pintle Hitches, New 1in. Drive Impact Wrench Kit, New 2in. x 50ft. Discharge Water Hose, New Auto Darkening Welding Helmets, New 3/8in. x 50ft. Automatic Air Hose Reel, New 5 ton Digital 4ft. x 4ft. Platform Scale. DIRECTIONS: 10 miles Northeast of Syracuse on Rt. 31 between Bridgeport & Lakeport. (10 minutes from Hancock International Airport and 15 minutes from Turning Stone Casino.) SALE SITE PHONE: (863) 660-4811, (863)602-8365
MONDAY, AUGUST 24 @ 4:00 PM
Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY (Evenings) (315) 637-8912 www.lyonauction.com
Page 138 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Komatsu America Corp. Launches PC210LL-10 Log Loader The Forest Machine Business attachment power mode. The Division of Komatsu America new monitor panel also proCorp. introduced its PC210LLvides ecology guidance (opera10 log loader. Featuring a more tional efficiency guidance), environmentally friendly engine operational records, fuel conthat increases horsepower by 7 sumption history and utilization percent, and lowers fuel coninformation. A standard sumption by 10 percent, the rearview monitoring system, Komatsu engine in the with the camera integrated into PC210LL-10 is EPA Tier IV the counterweight, allows the Interim certified. The operator to view directly behind PC210LL-10 replaces the forthe machine with the push of a mer Tier III PC200LL-8 model. button. This newest addition to Komatsu’s Dash-10 series of Purpose-Built Front log loaders has a flywheel Equipment Options horsepower of 158 hp (118 kW) Purpose-built front equipand weighs 65,118 lbs. (29,537 ment options are available for kg) in road builder configuraeach of the three, loader configtion. The PC210LL-10 also is urations. For the road builder, available in log loader and there is an HD boom and HD processor head carrier configuarm with one actuator piping rations. for application versatility. A The PC210LL-10 is special boom/arm arrangement equipped with the KOMTRAX without bucket cylinder and 4.0 technology, which wirelesslinkage is available for the ly sends machine operating This newest addition to Komatsu’s Dash-10 series of log loaders has a flywheel horsepower of 158 hp (118 processor head carrier configuinformation to a secure Web kW) and weighs 65,118 lbs. (29,537 kg) in road builder configuration. The PC210LL-10 also is available in ration. For the log loader consite. Data such as operating log loader and processor head carrier configurations. figuration, there is a 36 ft. (11 hours, location, cautions, fuel m) reach live heel forestry consumption and maintenance alerts are the operator to choose where and when to high drawbar pull for shovel-logging appli- boom with a 52 in. (132 cm) opening grapcations. Updated full-length support ski-type ple, or two types of 34 ft. (10 m) Butt-N-Top relayed for analysis. The KOMTRAX 4.0 regenerate. track roller guards help increase track life in forestry booms. fleet monitoring system increases machine availability, reduces the risk of machine theft Highly Efficient Hydraulic System tough logging conditions. The rear compartTaking hydraulic efficiency to the next ment covers on the PC210LL-10 are more (compared to machines that are not KOMConvenient Maintenance and TRAX-equipped), allows for remote diag- level, the integrated design uses a closed than three times thicker than those used on Serviceability The PC210LL-10 provides easy service nosis by the distributor, and provides a center-load hydraulic system with variable comparably sized excavators, and the comwealth of other information for business effi- speed matching. Variable matching allows partment doors also feature stronger door access to reduce costly downtime. The new model has longer handrails that surround the the engine speed to adjust based on the hinges. ciency and productivity. upper structure for easier accessibility. The Special features of the new PC210LL-10 hydraulic pump output for both light and radiator and hydraulic oil cooler are mountheavy-duty applications. The PC210LL-10 Komatsu Forestry Cab include: log loader configuration features adjustable The new ed side by side, making it easier to maintain flow controls for boom, arm, heel and grap- ROPS/OPS/FOPS/TOPS/FOG/WCB/Oreg and service. A new battery master disconnect EPA Tier IV Interim Certified ple functions for fine tuning hydraulic on OSHA certified Komatsu forestry cab switch is now standard. Engine The machine also is equipped with the Built upon proven Tier III technology, the response to individual operator preference. (and more) provides a more comfortable and Komatsu SAA6D107E-2 engine has 7 per- Additional enhancements have been made to quiet work environment. The reinforced Komatsu equipment management monitorcent more hp and provides up to 10 percent reduce hydraulic loss, for better efficiency framework of the cab is specifically ing system (EMMS), which continuously lower fuel consumption than the Tier III and lower fuel consumption. High-pressure designed for tough forestry applications. The monitors critical systems, as well as the engine on the previous model. The Komatsu hydraulic pump outlet screens are standard. operator platform is mounted on viscous planned maintenance schedule. EMMS prodamper mounts for low vibration levels. The vides enhanced diagnostic features, giving Tier IV Interim engine uses an advanced Upgraded Major Components high-back, fully adjustable seat is air sus- operators and technicians greater monitoring electronic control system to manage air-flow All major components on the new pended and heated for enhanced comfort. and troubleshooting capabilities to minimize rate, fuel injection, combustion parameters, diagnosis and repair time. and after-treatment functions to optimize PC210LL-10, including the engine, The cab is available with a 48 in. (122 cm) To further reduce owning and operating performance, reduce emissions and provide hydraulic pumps, motors, and valves, are hydraulic tilt or a 7 in. (17.7 cm) fixed cab costs, all Komatsu Dash-10 log loaders are exclusively designed and produced by riser and has two 12-volt ports and an auxil- covered by Komatsu CARE, Komatsu’s advanced diagnostic capability. Komatsu developed the hydraulically Komatsu. The loader uses a high carbody iary input to connect external devices. complimentary scheduled maintenance proThe cab has a new high-resolution 7 in. gram for three years or 2,000 hours actuated Komatsu variable geometry tur- with reinforced front idlers, higher capacity bocharger (KVGT) and an exhaust gas recoil springs, ski-type full length track guid- LCD color monitor with enhanced capabili- (whichever occurs first). Factory-certified recirculation (EGR) valve for the ing guards, straddle-mounted carrier rollers, ties that displays information in 25 lan- technicians use only Komatsu genuine parts PC210LL-10 that provides better precision HD swivel guard and front/rear pull hooks. guages for global support. The operator can and fluids to perform these services. The swing system and undercarriage easily select from six working modes to in air management as well as longer compoFor more information, visit www.komatnent life. The Komatsu diesel particulate fil- components on the PC210LL-10 are from match machine performance to the applica- suforest.us. ter (KDPF) has an integrated design that the next-size larger Komatsu excavators for tion. These working modes include power (This story also can be found on does not interfere with daily operation, work in demanding logging applications. mode, economy mode, lifting mode, breaker Construction Equipment Guide’s Web site at updates the operator on its status and allows The larger final drives and motors provide mode, attachment economy mode and www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 139
HOUSTON
(MAGNOLIA),
TX
VERY LATE MODEL CONSTRUCTION EQUIPMENT AUCTION (CAT, JOHN DEERE, DOOSAN, KOMATSU), AERIALS FROM SEVERAL NATIONAL RENTAL FLEETS, ATTACHMENTS, SUPPORT, TRUCKS & TRAILERS.
AUCTION
NOTE: This sale has very late model, low houred rental returns that will suit almost everybody and everyone. HILITES INCLUDE: 12 HYDRAULIC EXCAVATORS: (2) 2011 Doosan DX420LC, 2012 Doosan DX235LCR, 2010 Doosan DX225LCA, 2011-2010 Doosan DX225LC, 2006 Doosan DX225LCV Solar, 2010 Doosan DX180LC, 2011-2010 Doosan DX140R, 2012 Doosan DX140LC, 2005 JD 200CLC, LONG REACH EXCAVATOR: 2007 Cat 320LCLR, MOTOR GRADERS: JD 670B, 2 INTEGRATED TOOL CARRIER: 2005 JD 54HTC, Cat IT38G, 4 RUBBER TIRED LOADERS: 2011 Doosan DL220, Doosan DL160 Mega, 2012 Cat 924H, 2005 JD 544H, 5 CRAWLER TRACTORS: Cat D6RLGP, 2008 Cat D6NLGP, 2006 Cat D6N, 2007 JD 550JLGP, 2005 JD 450J, CRAWLER DUMP: Cat/Mitsubishi LD1000B, 11 TRACTOR LOADER BACKHOES: 2012 Cat 420F (4x4, cab), (6) 2012 Cat 420F (OROPS, 4x4), 2012 Cat 420E (4x4), Cat 420D (4x4), JD 310E (4x4), JD 310D, 4 VIBRATORY ROLLERS: 2006 Dynapac CA262PD, (2) Unused 2015 Dynapac CA2500PD, Unused 2015 Dynapac CA1500D, ASPHALT EQUIPMENT: CMI Asphalt Elevator, RUBBER TRACKED SKID STEER: 2008 Komatsu CK30, TELESCOPIC FORKLIFT: Gehl 663, 11 BOOM LIFTS: (3) 2008-2007-2006-2005 JLG 800AJ (4x4), (2) JLG 800AJ (4x4), (2) JLG 600AJ (4x4), 2005 JLG E400AN, 2006 Genie S60 (4x4), 2 SCISSOR LIFTS: 2011 JLG 3394RT, Snorkel TM12, 6 AIR COMPRESSORS: (6) 2011 Kaeser 210CFM (like new), 5 LIGHT PLANTS: (2) 2008- (2) 2007 IR Light Source, 2008 Magnum MLT3060, 2 TRACTOR LOADERS: (2) 2013 Kubota 3240 (4x4, loader), 2 BOOM TRUCKS: 2008-2007 Int’l 4200 (17 ton), 3 WATER TRUCKS: (2) 2006 Int’l. 4200 (s/a), 2001 Sterling (s/a), 4 TRUCK TRACTORS: 2012 Peterbilt 388 Heavy Haul (tri), 2011 Peterbilt Heavy Haul (tri.), 2007 Mack CNH613 (tri), 1992 Volvo (t/a), 4 DETACHABLE GOOSENECK TRAILER: (3) 2015 Witzco RG50 (tri.), 2003 Load King 55T (tri.), EQUIPMENT TRAILER: 2008 Ledwell LW48 (t/a), UTILITY VEHICLE: 2011 Kawasaki 4010 (4x4), 8 CONTAINERS: (4) 40ft., (4) 20ft., 2 PRESSURE WASHERS: (2) New Easy Kleen, ATTACHMENTS: Skid Steers: Smooth, Snow & Mulch Buckets, 60in.- 78in. Buckets, New Versatech Grapple Buckets, New Versatech Hay Spears, New Pallet Forks, New Fork Frames, New Versatech Brush Grapples, New Stump Buckets, NEW SUPPORT EQUIPMENT: New Mustang LF88 Plate Compactor, New Mustang MP4800 2in Submersible Pump, New Mustang CV3500 Concrete Vibrator, New 4 Pack 10lb. Ratchet Straps, New 3pc. 14in. Premium Diamond Blades, New Huskie 11218SDS Hammer Drill, New Huskie B65 Jack Hammer, New Stiff Neck Pintle Hitch, New 1in. Drive Air Impact Wrench, New 1/2in. Drive Aim Impact Wrench Kit, New 2in. x 50ft. Discharge Water Hose, New 3pc. Air Spray Gun Kit, New Auto Darkening Welding Helmet, New 3/8in. x 50ft. Automatic Air Hose Reel, New 5 Ton Digital 4ft. x 4ft. Platform Scale, New 3/4in. x 50ft. Jack Hammer Air Hose. DIRECTIONS: From Bush International Airport: Airport exit on JFK Blvd., take left ramp onto Will Clayton Parkway toward Central Cargo .2 miles. Continue on Jetero Blvd., continue on McKaughan Rd., left on Viscount Rd., left Mecom Rd. Take ramp onto JFK Blvd. toward Airport exit (I-45)/ Beltway 8/ Hardy Toll Rd. 2 miles. Take ramp onto Hardy Toll W toward Hardy Toll Rd. (tolls) for 2.9 miles. Take Hardy Toll Rd. North/ Woodlands exit onto Hardy Toll N (tolls) – 11.9 miles. Merge onto I-45 N for 8.4 miles. Exit #81/ Magnolia (FM-1488) toward Magnolia (I-45 S)/ Hempstead .3 miles. Take ramp onto I-45 S .2 miles, take ramp onto FM 1488 Rd. (FM-1488) toward I-45 N/ Sherbrook Dr. .3 miles. Take ramp onto North Fwy toward I-45 N .2 miles. Take ramp onto FM 1488 Rd. (FM-1488) toward Magnolia (I-45S) Hempstead for 8 miles. Site is on left.
Address: 8215 FM 1488, Magnolia, TX 77354. TEXAS AUCTION LICENSE: AUCTIONEER #15791 Jack H Lyon SALE SITE PHONE: (863) 660-3613
TUESDAY, AUGUST 25 @ 11:00 AM
CORPUS CHRISTI, TX
VERY LARGE LATE MODEL CONSTRUCTION RENTAL RETURNS AUCTION United Rentals TELESCOPIC FORKLIFTS, WAREHOUSE FORKLIFTS, BOOM & SCISSOR LIFTS, AIR COMPRESSORS, WELDERS, LIGHT PLANTS, SUPPORT, CRAWLER TRACTORS, RUBBER TIRED LOADERS, LOADER BACKHOES.
AUCTION
NOTE: This auction will consist of late model, low hour units that are being sold to make room for new equipment that is arriving now. HILITES: 14 TELESCOPIC FORKLIFTS: (2) 2007 Skytrak 8042, (4) 2007 Skytrak 6042, 2007 Skyjack 6036, 2007 Gehl RS8-42, (3) 2007 Gehl RS6-42, 2007 Genie GTH-842, (2) 2007 JLG G642, FORKLIFT: 2007 Doosan D35S2, 12 BOOM LIFTS: (2) 2008 JLG 800AJ (4x4), 2006 JLG 600AJ (4x4), 2003 JLG 600S (4x4), 2006 JLG 400S (4x4), 2007 JLG E300AJP, 2007 Genie S60 (4x4), 2007 Genie Z45/25, Genie S45 (4x4), 2006 Genie S40 (4x4), (2) 2008 Genie Z30/20N, 41 SCISSOR LIFTS: 2007 Skyjack SJ6832RT (4x4), (4) 2008 Skyjack SJIII4632, (3) 2008-(6) 2007 Skyjack SJIII3226, (17) 2008 Skyjack SJIII3219, 2007 JLG 3369LE, (3) 2007 JLG 2630ES, 2010 JLG 25AM, 2008-(3) 2007 JLG 1930ES, 2008 JLG 15MVL, 5 HYDRAULIC EXCAVATORS: 2011 Doosan DX225LCV Solar, 2010 Doosan DX140R, (2) 2006 Kubota KX121-3R1S, 2006 Kubota KX913R1, 3 HYDRAULIC HAMMERS & ACCESSORIES: (2) 2010 Atlascopco SBU220, 2010 Atlascopco SBC 410, 2 TRACTOR LOADER BACKHOES: 2006 Case 580M-II (4x4), 2005 JD 310G (4x4), 4 ASPHALT ROLLERS: (4) 2010 Wacker RD12A, 6 VIBRATORY ROLLERS: (2) Unused Dynapac CA2500PD, 2010 Volvo SD45D, (2) 2011-2010 Wacker RT82SC, 4 TRENCH ROLLERS: (2) 2011-2010 Wacker RT82-SC, 2010 Wacker RT56-SC, RUBBER TRACKED SKID STEERS: 2010 Bobcat T190, 4 TRENCHERS: (4) 2010 Ditchwitch RT12, AIR COMPRESSOR: 2005 Sullair 1600HAFDTQ, GENERATOR: 2008 Magnum Pro MMG75, 3 WELDERS: (3) 2010 Lincoln K2509-31 400amp, 18 LIGHT PLANTS: (18) 2010 Magnum Pro MLT3060, STUMP GRINDER: 2011 Vermeer SC252, 6 CONCRETE EQUIPMENT: 2011-2010 Multiquip WM120PH13 Mortar Mixer, (4) 2010 Stone SB1600 Buggies, WATER TRUCK: 2005 Sterling (s/a), 28 UTILITY VEHICLES: 2007-2006 JD TX Gator, 2010-(4) 2009 JD XUV850, 2011-(13) 2010-2009 Club Car XRT1550, 2011 Club Car XRT900, (2) 2008 Kawasaki 3010T (4x4), (3) 2007 Kawasaki 3010 (4x4), 5 PRESSURE WASHERS: 2011-2008 MI-T-M HS-3006-0MDK, 2011 Karcher TRS-2500, (2) New Easy Kleen, ATTACHMENTS: Skid Steers: Smooth, Snow & Mulch Buckets, 60in.- 78in. Buckets, New Versatech Grapple Buckets, New Versatech Hay Spears, New Pallet Forks, New Fork Frames, New Versatech Brush Grapples, New Stump Buckets, (3) 2010 Atlas Copco SBU220 Breaker, 2010 Atlas Copco SBC410, Excavators: 2010 Kent KHP-210 Plate Compactor, Backhoes: (2) 2010 Atlas Copco SB452, NEW SUPPORT EQUIPMENT: New Huskie 11218 SDS Hammer Drill, New Mustang LF88 Plate Compactor, New Mustang MP4800 2in Submersible Pump, New Mustang CV3500 Concrete Vibrator, New 4 Pack 10lb. Ratchet Straps, New 3pc. 14in. Premium Diamond Blades, New Huskie 11218SDS Hammer Drill, New Huskie B65 Jack Hammer, New Stiff Neck Pintle Hitch, New 1in. Drive Air Impact Wrench, New 1/2in. Drive Aim Impact Wrench Kit, New 2in. x 50ft. Discharge Water Hose, New 3pc. Air Spray Gun Kit, New Auto Darkening Welding Helmet, New 3/8in. x 50ft. Automatic Air Hose Reel, New 5 Ton Digital 4ft. x 4ft. Platform Scale, New 3/4in. x 50ft. Jack Hammer Air Hose, 2010 Gulf Coast TMWAC-10000 Hydrostatic Test Pump. DIRECTIONS: From Corpus Christi International Airport: East on Int’l. Dr.toward Glasson Dr. .7 miles, 2nd right onto Agnes St. .2 mile. Take ramp on left to TX-358/I-37/ Padre Island/Bayfront, merge onto TX-44E 1.6 miles. Keep left at fork, follow signs for TX-358 W/I-37/Bayfront – merge onto TX-358W 1.4 miles. Keep left at fork, follow signs for I-37 N/ San Antonio and merge onto I-37 N. Exit 14B toward Redbird Lane .3 mile. Merge onto Interstate 37 Access Rd. .2 mile. Site on left.
Address: 7753 IH 37 Corpus Christi, TX 78409. SALE SITE PHONE: (315) 250-1400, (817) 807-2761 TEXAS AUCTION LICENSE: AUCTIONEER #15791 Jack H Lyon
THURSDAY, AUGUST 27 @ 4:00 PM
Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY (Evenings) (315) 637-8912 www.lyonauction.com
Page 140 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ABSOLUTE PUBLIC AUCTION 15-256 FORESTRY EQUIPMENT TRUCKS - TRAILERS 2009 Morbark 40/36 Chipper 2004 Hyundai HL740-7 Wheel Loader 2000 Prentice 310E Log Loader 2000 John Deere 200LC Delimber 2010 Tigercat 620D Grapple Skidder (3) 2007 Western Star Log Trucks 2012 Freightliner Log Truck (5) GMC/Chevy Duramax 2500HD Pick-Ups (6) 1999-2010 Log Trailers RE: Complete Liquidation of Carver Brothers Logging ~ Business Closing ~ 199 South Patten Rd., Rt. 11, Patten, ME
Thursday, August 27, 2015 at 10AM
Preview: Thu., Aug. 13th 10am-12pm. 8am Morning of Sale ONLINE EQUIPMENT BIDDING AVAILABLE: VISIT KEENANAUCTION.COM TERMS: Cash or your good check. Out-of-State Checks w/ Bank Letter of Guarantee. 10% Buyer’s Premium Onsite. All items sold for immediate Runway Rd. removal. For more information call Keenan 1So. Portland, ME 04106 (207) 885-5100 & request auction Auction 207-885-5100 #15-256. Our 7,079 th Auction and 43 rd Company® info@keenanauction.com Year. Richard J. Keenan #236.
Scott Equipment Takes Delivery of 1,000th GR-1000XL Rough-Terrain Crane Scott Equipment of Monroe, La., recently took delivery of a special Tadano GR-1000XL rough-terrain crane in Houston, Texas. This crane was the 1,000th unit of the popular Tadano crane model produced at the Shido manufacturing plant in Japan. Despite early production delays due to the March 2011 Japan earthquake, this milestone was reached in just under four years. “Scott Equipment is a major player in the sales and rental of rough terrain (L-R) are Yo Kakinuma (Tadano); Roger Rivera (Scott Equipment); Curley Bordelon cranes in the Gulf Coast (Scott Equipment); Scott Cummins (Scott Equipment); and Tadashi Suzuki (Tadano). market and an impact part“We are very honored to accept the This crane will be transported to ner for Tadano,” said Yo Kakinuma, president and COO of Tadano 1,000th GR-1000XL crane,” said Scott their Baytown, Texas location. (This story also can be found on America. “Taking delivery of this Equipment President Scott Cummins. crane underscores our long-standing “Tadano cranes have brought and con- Construction Equipment Guide’s Web working relationship and commitment tinue to bring significant value to our site at www.constructionequipmentguide.com.) company and our customers.” to Scott Equipment.”
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 141
UTICA, NY
MIDDLETOWN (FLORIDA), NY
LARGE JOB COMPLETION AUCTION
RENTAL FLEET AUCTION
Ritter & Paratore
IT’S BIG!
CRANES, HYDRAULIC EXCAVATORS, RUBBER TIRED LOADERS, LOADER BACKHOES, CRAWLER TRACTORS, FORKLIFTS, DUMP TRUCKS, STAKE TRUCKS, TRAILERS, SUPPORT EQUIPMENT.
AUCTION
NOTE: Ritter & Paratore, having finished several jobs at the same time, will sell the following equipment, vehicles & support plus a quantity of rental fleet equipment. HILITES: 2 ROUGH TERRAIN CRANES: Omega 40, Grove RT48MC 8T (cab), 2 TRUCK CRANES: (2) P&H 790TC, 4 ARTICULATED HAUL TRUCKS: (2) Volvo 40C, (2) Moxy MT30, 13 HYDRAULIC EXCAVATORS: Unused Doosan DX300LC, 2012 Cat 320EL, New Unused Cat 312EL, Unused Cat 312EL, New Unused Cat 311FLRR, (2) Kobelco SK220LC Mark III, 2007 Kobelco SK235, Kobelco SK220LC Mark III, Kobelco ED150, Komatsu PC40, (2) Takeuchi TB15, 2 HYDRAULIC HAMMERS & ACCESSORIES: Stanley 60EXS, Large Red Hammer, 2 LONG REACH EXCAVATORS: (2) Kobelco SK290LR, RUBBER TIRED EXCAVATOR: Hyundai 170W-3, 4 RUBBER TIRED LOADERS: JD 744E, 2006 JD 624J, Samsung ST120, Owatanna, CRAWLER TRACTOR: Cat D8K (ripper), 2 TRACTOR LOADER BACKHOES: Kubota B20, JD 710D, VIBRATORY ROLLER: 2015 Dynapac CA2500D, 2 RUBBER TRACKED SKID STEERS: Cat 257B, Bobcat T300, 3 SKID STEERS: 2013 NH L218, Bobcat 753, Bobcat A300, 2 TELESCOPIC FORKLIFTS: 2006 JLG 534D10-45, Gradall 534-10-45, FORKLIFT: Cat V330C (33,000 lbs.) , 2 BOOM LIFTS: 2007 Genie Z135 (4x4), 2002 Genie S125 (4x4), JLG T350 (pull behind), 3 AIR COMPRESSORS: (3) 2011 Kaiser 210CFM (like new), LIGHT PLANT: IR Light Source, SCREENING PLANT: Exetec Robotrac, HYDROSEEDER: Reinco w/ 1500 gal. tank, 3 AGRICULTURAL TRACTORS: JD 7700 (4x4), JD 4850 (4x4), Massey Ferguson 8120 (4x4), ROLLBACK TRUCK: 1994 Mack (tri.), FLATBED TRUCK: 1997 Ford F350 (4x4, s/a), 3 DUMP TRUCKS: 2000 Mack CL713 (tri.), 1988 Freightliner (t/a), 1988 GMC (4x4, s/a), TRUCK TRACTOR: 1989 Kenworth (one of a kind), UTILITY TRUCK: 2007 Chevy 3500, SERVICE TRUCK: 2003 Ford F350 (4x4, s/a), 2 FUEL/LUBE TRUCKS: 1997 Ford F650 (s/a), 1992 Int’l 4900, 2 MILITARY TRUCKS: AM General XM818, AM General M35A2C, 5 PICKUP TRUCKS: 2004-2002 Ford F350 (4x4), 2005 Ford F250 (4x4), 2005 Dodge Dakota (4x4), 2003 Toyota, TAGALONG TRAILER: 2003 Load Trail 7 ton (t/a), 2 CAR HAULERS: (2) 2004 Mack Cardinal, 2 PRESSURE WASHERS: (2) New Easy Kleen, ATTACHMENTS: Rubber Tired Loader: JRB Side Dump Bucket, Skid Steers: Smooth, Snow & Mulch Buckets, 60in.- 78in. Buckets, New Versatech Grapple Buckets, New Versatech Hay Spears, New Pallet Forks, New Fork Frames, New Versatech Brush Grapples, New Stump Buckets, NEW SUPPORT EQUIPMENT: New Mustang LF88 Plate Compactor, New Mustang MP4800 2in. Submersible Pump, New Mustang CV3500 Concrete Vibrator, New 4 pack Ratchet Straps, New 3pc. 14in. Premium Diamond Blades, New Huskie B65 Jack Hammer, New Huskie 11218SDS Hammer Drill, New Stiff Neck Pintle Hitches, New 1in. Drive Impact Wrench Kit, New 2in. x 50ft. Discharge Water Hose, New Auto Darkening Welding Helmets, New 3/8in. x 50ft. Automatic Air Hose Reel, New 5 ton Digital 4ft. x 4ft. Platform Scale. DIRECTIONS: From Hancock International Airport: I-81 S to exit 25A for I-90 E approx. 50 miles. Take exit 31 toward NY-8/I-790W/NY-12, right onto North Genessee St., right onto Auert Ave. Continue onto Herkimer Rd. 2 miles to NY-5 E.
Address: 2435 State Route 5 Utica, NY 13502.
LARGE ACQUISITION OF RENTAL COMPANY VERY LARGE QUANTITY OF NEW & USED SUPPORT EQUIPMENT, LARGE QUANTITY OF TAGALONGS, HYDRAULIC EXCAVATORS, SKID STEERS, LOADER BACKHOES, LOADERS, AIR COMPRESSORS, TELESCOPIC & WAREHOUSE FORKLIFTS, BOOM & SCISSOR LIFTS.
AUCTION
NOTE: Sunbelt, acquiring a regional rental company, is selling equipment and support that is not needed at the current time along with very late model rental fleet Cat equipment. HILITES: 15 HYDRAULIC EXCAVATORS: New/Unused Doosan DX300LC, 2014 Cat 320EL, (3) 2014 Cat 312EL, Unused Cat 312EL, Cat 312DL, 2014 Cat 308CR, 2011 Cat 308D, (2) 2008 Cat 305, Unused Hitachi ZX135-5, Unused Komatsu PC138, 2012 Komatsu PC138U, Kobelco SK250LC, RUBBER TIRED EXCAVATOR: Hyundai 170W-3, RUBBER TIRED LOADER: 2007 JD 624J, 5 TRACTOR LOADER BACKHOES: Unused Cat 420F-II (4x4) (loaded), 2012 Cat 420F-II, 2011 Cat 420F (4x4), (2) 2009 JD 310 Super J, 2006 Terramite T5C, 3 ASPHALT ROLLERS: 2009 Mikasa MRH800 GS, 2008 Rammax AR26, Sakai HS66ST, 3 VIBRATORY ROLLERS: (2) New/Unused Dynapac CA2500PD, New/Unused Dynapac CA2500D, 2 RUBBER TRACKED SKID STEERS: Bobcat T190, 2008 Bobcat T180, 7 SKID STEERS: (2) 2011 Cat 262B-3, (2) 2011 Cat 226B-3, 2005 Bobcat S175, (2) Bobcat S175, MINI TRACK LOADER: Dingo TX420, 2 TELESCOPIC FORKLIFTS: 2011 Cat TL1255 (cab), Gradall 534D642 (4x4), 4 FORKLIFTS: 2005 Komatsu FG25T14, Komatsu FG25C12, Komatsu FG25C11, TCM, BOOM LIFTS: 2006 Biljax Haulotte XL4527, 6 SCISSOR LIFTS: Skyjack SJ7127, (2) Skyjack SJIII3226, 2008 - (2) 2006 Skyjack SJIII3219, 12 AIR COMPRESSORS: (3) 2011 Kaeser 210CFM (like new), IR XP375WIR, 2008-(2) 2007 IR P185WIR, (2) IR P185WIR, 2008 IR P135WIR, IR P110WIR, IR P100WJD, 8 LIGHT PLANTS: (3) 2006 Amida AL4060D4MH, (5) Amida AL4060D-4MH, 2 WATER PUMPS: 2005 MQ QP4TH, Wacker PT6LT, 2 CONVEYORS & STACKERS: (2) 2011 Multilift EZLift26, STRAW BLOWER: 2006 Finn B7OT, 5 CONCRETE EQUIPMENT: (2) Whiteman 9CF Mortar Mixers, Stone 2CF Mixer, Miller MB21 Buggy, Morrison Superscreed, 2 STUMP GRINDERS: 2007 Vermeer SC252, Vermeer SC252 (s/a), SWEEPER: Laymor, TOW TRUCK: 1985 White/ Volvo (s/a), DUMP TRUCK: 1988 Mack, TRUCK TRACTOR: 2008 Kenworth T800 (tri.), STAKE TRUCK: 1992 Chevy, 8 TAGALONG TRAILERS: 2006 Demco DT6000 (t/a), Demco DT6000 (t/a), 1998 Cam 6ft.x16ft. (t/a), 1998 Cam 6ft.x14ft. (t/a), 1988 Alleg 6ft.x16ft. (t/a), 1996 Nels 6ft.x16ft. (t/a), 1993 Nels 6ft.x16ft. (t/a), 1989 Butler 6ft.x14ft. (t/a), 5 UTILITY TRAILERS: 2000-1996 Karavan 4ft.x8ft. (s/a), 1990 Stone 4ft.x8ft. (s/a), 1989 Nels 4ft.x8ft. (s/a), 1986 Frueh 4ft.x8ft. (s/a), PRESSURE WASHER: Simpson, ATTACHMENTS: Skid Steers: (2) New Tomahawk 78in. Snow & Mulch Bucket, (2) New Tomahawk 72in. Rock Bucket, (2) New Tomahawk 72in. Smooth Bucket, (2) New Tomahawk 66in. Brush Grapple (one cylinder), (2) New Tomahawk 66in. Smoother Bucket, (2) New Tomahawk 66in. Grapple Bucket (one cylinder), (2) New Tomahawk Stump Bucket, (6) New Tomahawk 42in. Fork Frame, (4) New Tomahawk HD Hay Spear, (10) New Tomahawk Quick Attach Mount Plate, Forklift: (5) Set of Forks, NEW SUPPORT EQUIPMENT: (4) New Mustang LF88 Plate Compactors, New Mustang ML80S Rammers, New Mustang M30 Core Drill, New Mustang MP3 3in. Water Pump, (3) New Mustang MP4800 2in. Submersible Pumps, (3) New Mustang CV3500 Concrete Vibrators, (12) New 3pc. 14in. Diamond Blades, (6) New 6 packs of 14in. Abrasive Blades, (6) New 4 packs of 10,000lb. Ratchet Cargo Straps, New 5 Ton Digital 4ft. x 4ft. Platform Scales, New Huskie 11218 SDS Hammer Drills, (4) New 1in. Drive Air Impact Wrenches, (4) New 1/2in. Drive Air Spray Gun Kits, (6) New 2in. x 50ft. Discharge Water Hoses, (4) New Stiff Neck Pintle Hitches, SUPPORT EQUIPMENT: Air Hammers, Rock Drills, Pulverizer, Cutter, Dry Vacs, Upright Vacuums, Hoist, Tine Tillers, Dethatchers, Overseeder, Mowers, Cable Installer, Threader, Augers, Aerator, Floor Stripper, Carpet Cleaner, Ladders, Plate Compactors, Jumping Jacks, Blower, Vacuum Systems, Concrete Grinder, Tow Dolly, Cutoff Saws, Sandblasters, Magnetic Drills, Fence Post Driver, Floor Stripper. DIRECTIONS: Route 17E to Exit 124.: At traffic light, make a left onto 17A. Go 4.2 miles to traffic light, make a right onto Meadow Road. Go 7/10 of a mile. The sale site will be on the left. Route 17W to Exit 124: At traffic light, make a left. Continue to next traffic, make a left onto 17A. Go 4.2 miles to traffic light, make a right onto Meadow Road. Meadow Rd. becomes Pumpkin Swamp Rd. Go 1.2 miles. The sale site will be on the left. From Route 84 east or west, get off at exit 4E go to exit 124, follow directions for Route 17E. From NYS Thruway: get off at exit 16, follow directions for Route 17W.
Address: 94 Pumpkin Swamp Rd., Florida, NY 10921. SALE SITE PHONE: (863) 660-4811, (863)602-8365
SATURDAY, AUGUST 29 @ 9:30 AM
SITE PHONE: (863) 660-4811
SUNDAY, AUGUST 30 @ 11:00 AM
Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY (Evenings) (315) 637-8912 www.lyonauction.com
Page 142 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
John Deere L-Series Tractor Loaders Boast Improvements
The L-Series meets today’s emission regulations through a rugged Final Tier IV/EU Stage IV PowerTech Plus diesel engine on the 210L (93 hp) and a certified ITIV/Stage III B John Deere PowerTech E engine on the 210L EP (70 hp).
The 210L EP and 210L, the newest members of the John Deere L-Series lineup, boast several customer-inspired improvements that are ideal for earthwork, roadwork, land clearing and landscaping operations. “These machines aren’t just modified backhoes. The 210L EP and 210L are purpose built for tractor loader owners and their unique applications,” said Brian Hennings, product marketing manager, backhoes and tractor loaders, John Deere Construction & Forestry. “We’re seeing these machines being used more and more outside the West Coast. Their versatility sets them apart on the job site.” The L-Series meets today’s emission regulations through a rugged Final Tier IV/EU Stage IV PowerTech Plus diesel engine on the 210L (93 hp) and a certified ITIV/Stage III B John Deere PowerTech E engine on the 210L EP (70 hp). Both models boast a four-speed PowerShift transmission that
allows smooth no-clutch fingertip shifting and direction changes for fast work cycles. Depending on intended use, each tractor loader model can be equipped with a canopy or an optional four-season air-conditioned/heated cab. Inside the cab, updates were made to improve comfort and visibility. These include a larger right-hand armrest and increased seat rotation up to 70 degrees (20 left and 50 right) for a better view of the box blade and easier entry and exit from the cab. The tractor loaders also boast a new fender design and improved lighting scheme for better visibility around the canopy. A premium LED package includes two front spotlights, two rear and two side floodlights. An easy-view, multi-language monitor displays important operating information. A new “palm-on-top” loader-control grip increases operator comfort and provides fingertip control of clutch disconnect momentary mechanical-front-wheel drive
(MFWD) and other loader functions. Onthe-fly MFWD can be engaged to give extra traction in poor job site conditions or to move heavy loads. An optional limited-slip front axle delivers 65 percent of available power to the tire with the best traction for true all-wheel-drive pulling power. A new hitch design makes it easier to position the box blade over the pile for added versatility and productivity. Optional dual-tilt rear hydraulic cylinders provide greater three-point side-to-side hitch control of rear attachments. Both the 210L EP and 210L also can be outfitted with a quick-coupler to accept numerous attachments. The integral three-point hitch and optional power takeoff (PTO) accommodate a variety of Category 2 tools, such as disks, mowers, blades and box scrapers. Two rear ballast-weight packages (700 and 1,500 lb.) increase versatility in various loader applications. Like their backhoe counterparts, L-Series
tractor loaders also boast the benefits of reliability and uptime. Same-side ground-level service points help speed daily checks. A two-position tilt hood provides same-side ground-level access to engine and transmission dipsticks, engine-oil fill, fuel and air filters, and coolant reservoir. The fuel fill area also is nearby. Operators looking to get the most out of their tractor loader can rely on Ultimate Uptime featuring John Deere WorkSight. With Ultimate Uptime, operators receive predelivery and follow-up inspections; three years of JDLink telematics, machine heath prognostics and remote diagnostics, and programming capability; and the ability to add dealer-provided uptime solutions to customize the package to individual needs. For more information, visit www.JohnDeere.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 143
* NEW LOCATION!
ATLANTA (BREMEN), GA
RENTAL FLEET AUCTION LATE MODEL CAT, JOHN DEERE CONSTRUCTION EQUIPMENT, AERIALS, FORKLIFTS, ATTACHMENTS, SUPPORT, TRUCKS & TRAILERS.
AUCTION
NOTE: This special auction will have very late model construction equipment (rental fleet) with very low hours that will suit anybody & everybody. HILITES: 7 HYDRAULIC EXCAVATORS: 2006 Cat 330DL, 20142012 Cat 320EL, 2014-2012 Cat 312EL, 2013 Cat 304ECR, 2012 Cat 303.5ECR, 4 MOTOR GRADERS: 2009 Cat 140M, (2) Cat 140HVHP, Cat 12HVHP, MOTOR SCRAPER: Cat 621G, 4 RUBBER TIRED LOADERS: 2010 Cat 980H, 2013-2012 Cat 908H2, 2010 Cat 906H, CRAWLER TRACTOR: 2009 Cat D5KXL, CRAWLER LOADER: Cat 939C, 3 ASPHALT PAVERS: 2007 Mauldin 1750-C, 2005 Leeboy 8500, Leeboy 8515, 2 ASPHALT ROLLERS: IR DD14, Leeboy 300, 3 VIBRATORY ROLLERS: (2) New Unused Dynapac CA2500PD, Unused Dynapac CA2500D, 4 BOOM LIFTS: 2008 JLG 800AJ (4x4, Skypower), (2) 2007-2006 Genie Z30-20EN, 3 AIR COMPRESSORS: (3) 2011 Kaeser 210CFM, 3 TRUCK TRACTORS: 2005 Int’l 9400I, 2006 Volvo (t/a), 2005 Volvo VNL64T-630, 2 PRESSURE WASHERS: (2) New Easy Kleen, ATTACHMENTS: Skid Steers: Smooth, Snow & Mulch Buckets, 60in.- 78in. Buckets, New Versatech Grapple Buckets, New Versatech Hay Spears, New Pallet Forks, New Fork Frames, New Versatech Brush Grapples, New Stump Buckets, NEW SUPPORT EQUIPMENT: New Mustang LF88 Plate Compactor, New Mustang MP4800 2in Submersible Pump, New Mustang CV3500 Concrete Vibrator, New 4 Pack 10lb. Ratchet Straps, New 3pc. 14in. Premium Diamond Blades, New Huskie 11218SDS Hammer Drill, New Huskie B65 Jack Hammer, New Stiff Neck Pintle Hitch, New 1in. Drive Air Impact Wrench, New 1/2in. Drive Aim Impact Wrench Kit, New 2in. x 50ft. Discharge Water Hose, New 3pc. Air Spray Gun Kit, New Auto Darkening Welding Helmet, New 3/8in. x 50ft. Automatic Air Hose Reel, New 5 Ton Digital 4ft. x 4ft. Platform Scale, New 3/4in. x 50ft. Jack Hammer Air Hose. DIRECTIONS: From Atlanta Airport: I-20 W to exit 5, turn right and go North 1.7 miles, Turn left on US-78 W and go 4.2 miles to sale site on right. (West Georgia Mud Bog Park.) From Birmingham, AL: Go East on I-20 to exit 5, north on Hwy 100 3.6 miles to 100 bypass to US78 East. Go 3.9 miles to sale site on left. (West Georgia Mud Bog Park.)
Address: 4000 US-78, Bremen, GA 30110. GA LICENSE: AUNR002859 – Jack Lyon Auctioneer. SITE PHONE: (770) 537-7386
(LATE START!)
TUESDAY, SEPTEMBER 1 @ 4:00 PM
YORK, SC
(near Charlotte, NC)
FORMER ESTATE LIQUIDATION LATE MODEL AGGREGATE & CONSTRUCTION EQUIPMENT, AERIALS & TELESCOPICS, SUPPORT, ATTACHMENTS. REAL SHARP EQUIPMENT! (LOW-HOURED.)
AUCTION
NOTE: To settle this estate, the following equipment will be sold in order to continue with further operations of this company. HILITES INCLUDE: 3 SCREENING PLANTS: 2012 Powerscreen Warrior 1800, 2012-2011 McCloskey R155, 3 CONVEYORS & STACKERS: (2) 2012 Telestack TC-421, 2012 McCloskey 80x36, 7 HYDRAULIC EXCAVATORS: 2014-2012 Demo Cat 320EL, New Unused Cat 312EL, (2) 2011 Doosan DX350LC, 2011 Doosan DX140BLC, 2012 Doosan DX80R, 2 RUBBER TIRED LOADERS: 2012 Cat 908H, 2012 Cat 906H, 2 CRAWLER TRACTORS: 2012 Case 850LWT, 2011 Case 650LWT, 2 VIBRATORY ROLLERS: (2) Unused Dynapac CA2500D, 4 TRACTOR LOADER BACKHOES: (3) 2012-2010 Case 580 Super N (4x4), 4 SKID STEERS: 2012 Cat 252C (cab), 2012 Cat 236B-III (cab), 2011 Case SR250HF, 2012 Case SR200, TELESCOPIC FORKLIFT: 2012 Cat TL1255 (cab), 3 AIR COMPRESSORS: (3) 2011 Kaeser 210CFM, 2 PRESSURE WASHERS: (2) New Easy Kleen, ATTACHMENTS: Skid Steer: Smooth, Snow & Mulch Buckets, 60in.- 78in. Buckets, New Versatech Grapple Buckets, New Versatech Hay Spears, New Pallet Forks, New Fork Frames, New Versatech Brush Grapples, New Stump Buckets, NEW SUPPORT EQUIPMENT: New Mustang LF88 Plate Compactor, New Mustang MP4800 2in Submersible Pump, New Mustang CV3500 Concrete Vibrator, New 4 Pack 10lb. Ratchet Straps, New 3pc. 14in. Premium Diamond Blades, New Huskie 11218SDS Hammer Drill, New Huskie B65 Jack Hammer, New Stiff Neck Pintle Hitch, New 1in. Drive Air Impact Wrench, New 1/2in. Drive Aim Impact Wrench Kit, New 2in. x 50ft. Discharge Water Hose, New 3pc. Air Spray Gun Kit, New Auto Darkening Welding Helmet, New 3/8in. x 50ft. Automatic Air Hose Reel, New 5 Ton Digital 4ft. x 4ft. Platform Scale, New 3/4in. x 50ft. Jack Hammer Air Hose. DIRECTIONS: From Charlotte International Airport: Billy Graham Parkway from RC Josh Birmingham Parkway to NC-160, Shopton Rd. W, SC-49S and SC-274S to Campbell Rd. in York County. Right on Campbell Rd. Site on left.
Address: 6247 Campbell Road York, SC 29745 SALE SITE PHONE: (262) 903-6269 SC AUCTIONEER LICENSE: Jack Lyon # AUC.4070, SC AUCTION FIRM: #AF3799
WED., SEPTEMBER 2 @ 4:00 PM
Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY (Evenings) (315) 637-8912 www.lyonauction.com
Page 144 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
TRUCKS, CONSTRUCTION & FORESTRY AUCTION
Absolute Auction Complete Liquidation Northwest Erectors, Inc. Thurs., Sept. 17, 2015-9:00 A.M. Ambler, PA
NOTICE: After (49) successful years in the steel erecting business the owners of Northwest Erectors, Inc. have decided to cease operations in order to pursue other interests. Northwest Erectors has been directly involved in projects throughout Southeastern Pennsylvania, New Jersey, and Delaware. They have had the pleasure to work on multiple pharmaceutical facilities, hospitals, and several local schools. All items in the auction are owned by Northwest Erectors, Inc. and will sell to the highest bidder, regardless of price and without minimums, reserves, or Buyer’s Premium!
2 DAY AUCTION: SEPTEMBER 2-3, 2015 MONTGOMERY, AL, USA
ITEMS INCLUDE: `02 AMERICAN 5530, 75 Ton Conventional Crane • `81 LORAIN LT-275, 27.5 Ton Hydraulic Rough Terrain Crane • `97 MANITEX, 17 Ton Boom Truck • Aerial Lifts • Scissor Lifts • Forklifts • Roll-Back & Utility Trucks • PLUS: Welders, Rigging And Lifting Supplies, Contractors Tools, Safety Equipment, Scaffolding, Shop Tools, Shelving Units, Miscellaneous, etc.
Call (800) 233-6898 or Email sales@hunyady.com For Complete, Descriptive Brochure!
www.Hunyady.com
(2) CAT 140H
(2) CAT 740
(2) KAWASAKI 80Z V-2
(12) 2009 FORD F750 SERVICE TRUCKS
(7) 2007-2005 MACK CV713
CAT D6K LGP PA Auction License No: AY000281 While information is believed to be accurate, all items will be sold “As-Is, Where-Is” without guarantee or warranty. A physical inspection is suggested.
(10) 2015 MACK GU713
(4) 2015 MACK GU713 ROLLOFFS
2007 CAT AP-1055D
2007 DEERE 700J LGP
2008 CAT 966H
2013 DEERE 750K LGP, 2215 HRS
2014 CAT 420E 4X4
2014 CAT D5K XL, 800 HRS
CAT 325DL
CAT D8N
CAT AP-655C, 1189 hrs
KOMATSU WA500
John Deere Extends JDLink Ultimate Service to Five Years In an effort to better meet the needs of today’s production-scale customer, John Deere is extending its JDLink Ultimate service in base subscription from three to five years. The change illustrates how the Moline-based manufacturer is working behind the scenes to develop solutions for customers who are increasing technology adoption rates and utilizing their equipment for longer periods of time. “Production-scale customers are different. They work in high-volume, high-production situations, so they need their equipment to run longer and harder than ever — sometimes around the clock,” said Jena HoltbergBenge, director, John Deere WorkSight. “These customers told us they have a different set of needs, and we listened. We responded by providing the two additional years of JDLink Ultimate, more proof that we are partnering with our customers and our dealers to make sure their machines stay up and running.”
JDLink is a telematics system designed to remotely connect owners and managers to their equipment, and to provide alerts and machine information including location, utilization, performance and maintenance data to manage where and how equipment is used. The JDLink equipment management solution is the heart of John Deere WorkSight — a technology tool that helps customers be more productive, avoid downtime and keep costs low with advice and support from a John Deere dealer. Equipment covered in this extension includes the 250D-II, 300D-II, 370E, 410E and 460E articulated dump trucks; 1050K crawler dozer; 470G, 670G and 870G excavators; and 744K-II, 824K-II, 844K-II and 944K wheel loaders. For more information, visit www.JohnDeere.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 145
Absolute public equipment auction Featuring equipment from Allied Erecting & Dismantling Co, Inc.
Caterpillar 963C & Caterpillar 963C LGP
Caterpillar D9L
3 of 8 – Caterpillar 345BL Series II
1 of 5 – International PayStar 5000 Off Highway & 1 of 5 – Red River 70 Ton Off Highway
2 of 3 – Caterpillar 988F
Link-Belt 7400 w/Allied Gator AGS2038
2 – Grove RT990 90 Ton 4x4
1 of 2 – Grove RT760 60 Ton 4x4
Youngstown, OH
September 2 (Wednesday) 9 am
Equipment includes
Bid in person or online
Location
Excavators, crawler tractors, wheel loaders, crawler loaders, skid steers, cranes, lifts, trucks, trailers, pickups, shop tools & much more
▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public, free registration
Allied Erecting & Dismantling Co, Inc. 2100 Poland Avenue, Youngstown, Ohio
More items added daily Call about selling: 234.201.9994
Financing & leasing available Up to 100% financing, with no money down. Auction Firm # 2008000166 Auctioneer Frederick R. Vilsmeier # 2004000137
See complete listings at rbauction.com
Page 146 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX AIM ATTACHMENTS ................................................95 ALEX LYON & SON INC PLAN AHEAD CALENDAR....................................133 RACINE WI 8/22 SYRACUSE NY 8/24 ................137 HOUSTON TX 8/25 CORPUS CHRISTI TX 8/27..139 UTICA NY 8/29 MIDDLETOWN NY 8/30 ..............141 ATLANTA GA 9/1 YORK SC (CHARLOTTE NC AREA) 9/2 ..............143 ALEX PARIS CONTRACTING CO INC ....................23 ALL ISLAND EQUIPMENT CORP ..............................7 ALLIED CONSTRUCTION PRODUCTS ............79,87 AMERICAN EQUIPMENT LLC ................................43 AMULET MFG CO INC ............................................84 ASPHALT CARE EQUIPMENT ................................62 ASPHALT PAVING ....................................................70 ATI LEVEL BEST ......................................................46 BARGAINS..............................................................129 BELL TRUCKS AMERICA INC ................................99 BEST LINE EQUIPMENT ........................................28 BINDER MACHINERY CO..........................................3 BLANCHARD MACHINERY INC ..............................32 BOBCAT COMPANY ..............................................124 BOMAG ....................................................................63 BRANDYWINE TRUCKS & EQUIPMENT CO..........36 CASE CONSTRUCTION ........................................101 CATERPILLAR GLOBAL CONSTRUCTION ............39 CEG SCALE MODELS ............................................51 CLASSIFIED ..........................................................130 CLEVELAND BROTHERS EQUIPMENT CO ..........26 COMPANY WRENCH ..............................................42 CONSTRUCTION CRANE & TRACTOR INC ..........61 CONSTRUCTION EQUIPMENT GUIDE ......58,76,126 COSTANZI CRANE & RIGGING CO INC ................54 CURRY SUPPLY CO ................................................52 DANELLA USED TRUCKS & EQUIPMENT ............42 DAVE HALLMAN CHEVROLET................................46 DEACON EQUIPMENT CO INC ..............................43 DITCH WITCH ..........................................................57 DRUM CUTTERS ....................................................42 EAGER BEAVER TRAILERS....................................33 EAGLE POWER & EQUIPMENT CORP ................147 EDWARD EHRBAR ................................................17 ELLIOTT & FRANTZ INC ....................................50,64 EMPLOYMENY OPPORTUNITY ............................128 EQUIPMENT MART OF NEW YORK ......................35 ESCO CORP ............................................................95 FIVE STAR EQUIPMENT INC ..................................32 FLUID CONTROL SERVICES ..................................54 FLUID POWER ......................................................127
FOLEY INC ................................................................9 GEORGE & SWEDE SALES ....................................50 GOMACO CORP ......................................................70 GSE&E GARDEN STATE ENGINE & EQUIPMENT ..36 H & L TOOTH CO ....................................................95 H O PENN MACHINERY CO INC ............................16 HALE TRAILER BRAKE & WHEEL ..........................18 HARTER EQUIPMENT INC......................................12 HELAC CORP ..........................................................94 HESS AUCTIONEERS LLC MARIETTA PA 08/21 ....................................136 HITACHI CONSTRUCTION MACHINERY ............105 HOFFMAN EQUIPMENT INC ..................................21 HRT/GEOMETRY GLOBAL INC ..............................91 HUNYADY AUCTION CO AMBLER PA 9/17..........................................144 HYDREMA U S INC ................................................117 HYUNDAI CONSTRUCTION EQUIPMENT 98,99,109 ICUEE ......................................................................55 IRONHORSE EQUIPMENT INC ..............................47 IRONPLANET WEEKLY ONLINE AUCTION 8/13,20,27 ....135 J D EQUIPMENT ......................................................30 JCB INC ....................................................................81 JESCO ........................................................................6 JFW EQUIPMENT INC ............................................64 JM WOOD AUCTION MONTGOMERY AL 09/02-03 ......................144 JOHN DEERE ..........................................................83 JOHN DEERE SKID STEER ..................................116 KEENAN AUCTION CO PATTEN ME 8/27..........................................140 KEY EQUIPMENT ....................................................46 KOBELCO CONSTRUCTION MACHINERY ............53 KOMATSU AMERICA CORP ..................................107 KUBOTA....................................................................85 KUBOTA SVL ..........................................................111 LABOUNTY MANUFACTURING INC ......................89 LEEBOY....................................................................65 LINK-BELT EXCAVATORS ..............................120,121 MAGNUM ATTACHMENTS ....................................128 MAULDIN PAVING PRODUCTS ..............................60 MESSICK’S ..............................................................91 METSO MINERALS CRUSHING............................123 METSO MINERALS SCREENING..........................113 MIDLANTIC MACHINERY ........................................13 MIKE ZYNDORF LLC ..............................................38 MILTON CAT(DS)......................................................22 MUNICIBID.COM ....................................................136
NATIONAL ATTACHMENTS ....................................93 NORRIS SALES CO INC..........................................19 NPK CONSTRUCTION EQUIPMENT INC ............104 OKADA AMERICA ....................................................92 OPDECISION............................................................43 OPDYKE INC ............................................................52 PALADIN HEAVY CONSTRUCTION ........................91 PAVEMENT RECYCLERS/BAGELA USA ................68 PENN JERSEY MACHINERY ....................................5 PETERSON PACIFIC CORP ..................................114 PETROWSKY AUCTIONEERS INC CAMBRIDGE OH 8/13 ................................134 PINE BUSH EQUIPMENT CO..................................25 PLASTERER EQUIPMENT CO INC ........................10 RANSOME CAT ..........................................................2 RAYCO......................................................................56 RITCHIE BROS AUCTIONEERS YOUNGSTOWN OH 9/2 ..............................145 UNRESERVED PUBLIC AUCTIONS ..........148 ROAD BUILDERS MACHINERY ............................127 ROADTEC ................................................................69 ROSCO MFG CO ....................................................66 SAKAI AMERICA INC ..............................................67 SHORQUIP SUPPLY INC ........................................37 STEPHENSON EQUIPMENT INC ............................11 STEWART & STEVENSON ATLAS COPCO............45 SULLAIR ..................................................................45 TAKEUCHI ..............................................................118 TEREX CONSTRUCTION ......................................115 THUNDERCREEK ....................................................47 TRACEY ROAD EQUIPMENT INC ..........................15 TRANSPORT EQUIPMENT SALES ........................29 TRENCH SHORING SERVICES ..............................57 TRENCHTECH ........................................................31 UTILITY AUCTIONS INC WILMINGTON DE 08/28 ..............................140 VMC ........................................................................54 VOLVO COMPACTION ............................................71 VOLVO CONSTRUCTION EQUIPMENT-NA............74 WACKER NEUSON ..................................................96 WANTED ................................................................131 WEACO ....................................................................45 WESTCHESTER TRACTOR INC ............................28 WIRTGEN AMERICA ................................................72 WOLFE AUCTIONS FREDERICK MD 8/22 ..................................136 WOODS CRW CORP ..............................................20 YANMAR AMERICA................................................103 YOUR NORTHEAST SITECH DEALERS ..............110
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 12, 2015 • Page 147
w w w. e a g l e p o w e r a n d e q u i p m e n t . c o m
Introducing the New Case 850M Series Dozer
RECENT TRADES 2013 Case 1121F Wheel Loader, Stk#: 35368, 1,987 Hrs ............ ..........$245,900
2012 Case TR320 CTL, Stk# 36112, 1,102 Hrs ..............$34,500
1998 Grove AMZ50XT Manlift, Stk# 35828, 1,663 Hrs................ ................................................................................................$14,000
2013 Takeuchi TL10 CTL, Stk# 36118, 1,300 Hrs .........$43,500
2012 Takeuchi TW80C Wheel Loader, Stk# 36115, 1,012 Hrs.. ................................................................................................$56,400
1984 John Deere 344E Wheel Loader, Stk# 35884, 11,515 Hrs...............................................................................$23,500
Authorized Dealer for These Quality Lines: Toro Dingos, Trenchers, Horizontal Directional Drills • Eager Beaver & CAM Trailers • Rammer by Allied Hydraulic Hammers & Shakers • Sims Cabs & Cab Enclosures • Guest Industries Forks • Airman Portable Air Compressors • Zanetis Planers • Trailking Trailers • FFC Attachments Frank Beck
Dean R. Leonetti
Pat DiCicco
Jim Lutz
Tom Scott
Richard Verna
Rodney Bush
Dean J. Leonetti
S. Montgomery Co.
S. Montgomery Co.
Phila Co. & Bucks Co.
Bucks & N. Montgomery Counties
Delaware Co. & S. Chester Co.
215/870-4546
215/699-5871
215/680-9203
215/870-8567
S. Chester Co., Cecil County, MD, New Castle Co., DE
Skid Steer/Trencher Specialist Delaware Co., S. Chester Co., New Castle Co. DE, Cecil Co. MD
Skid Steer/Trencher Specialist Philadelphia Co., S. Montgomery Co., Bucks Co. & N. Chester Co.
302/354-1947
215/783-1847
Dean R. Leonetti, Sales Manager
•
215/699-5871
953 Bethlehem Pk (Route 309) Montgomeryville, PA 18936 215/699-5871 Fax 215/699-6416 NEW HOURS Mon.-Fri. 7AM-5:30PM
302/530-9134 Brandon Jewell, Toro Dingo Specialist
•
2211 Dupont Highway New Castle, DE 19720 302/652-3028 Fax 302/652-7540 NEW HOURS Mon.-Fri. 7AM-5PM
610/420-4770
610/312-3995
55 Senn Drive Eagle, PA 610/458-7054 Fax 610/458-7094 NEW HOURS Mon.-Fri. 7:30AM-4PM
Page 148 • August 12, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Unreserved Unr reserrved p public ublic equipment auctions W Wee no now w off offer ffer er lo low-rate w-rate le leasing. asing. App Apply ly ttoday. oday.
2010 John Deere 310J 4x4 Columbus
1 of 8 – Caterpillar 777D | Ashland
2011 Caterpillar 329DL | Ashland
3 of 8 – Caterpillar 345BL Series II Youngstown
2008 Caterpillar D8T | North East
2007 & 2006 Caterpillar 980H | North East
2 – Grro ove RT990 90 Ton | Youngsstown
Mack CV713 Granite | North East
1 of 2 – Tadano TR500XL-4 50 Ton 4x4x4 Atlanta
Unused, reb rebuilt, used parts & major components | Ashland
1 of 2 – Caterpillar 992G High Lifftt Ashland
2 – 2011 Komatsu PC130-8 | North East
27,230+ 27,230+ items items in 70+ auctions including including Austin, MN Columbus, OH Tipton, CA Houston, TX North East, MD Las Vega as, NV Phoenix, AZ Youngstown, OH Ashland, K KY Y
Aug 19 Aug 21 Aug 26 Aug 26–27 Aug 27 Aug 28 Sep 2 Sep 2 Sep 15–17
Atlanta, GA Minneapolis, MN Sacramento, CA Forrt Worth, TX Kansas City, MO Los Angeles, CA Nashville, TN St. Louis, MO Salt Lake City, UT
Sep 17 Sep 18 Sep 22 Sep 23–24 Sep 25 Sep 25 Sep 29 Sep 29 Sep 29
M Motor otor VVehicle ehicle Dealer Dealer License #DLR25867, #DLR25867, Au Auction ction Firm # 2008000166, Au Auctioneer ctioneer Fr Frederick ederick R. VVilsmeier ilsmeier # 2004000137, Au Auctioneer ctioneer Gregory Gregory S. S. Fuqua Fuqua # 13957, Auction Auction Company Company Bond #0470724, Au Auctioneer ctioneer Gr Greg eg Highsmith Highsmith Bond # 0470728, Au Auctioneer ctioneer John Korrey Korrey Bond # 0470729, Au Auction ction Firm #2389, Au Auction ction Company Company License # 001348, Auctioneer Auctioneer Gregory Gregory S. S. Fuqua Fuqua #AU002665, #AU002665, Au Auctioneer ctioneer Ed Eddie die R. Graham Graham # 7014014, Au Auctioneer ctioneer E. R. Butch Butch Gr Graham aham # 6018, Au Auctioneer ctioneer Ed Eddie die R. Gr Graham aham #2237, Auction Auction Firm License # 444.000193, Auctioneer Auctioneer Gr Greg eg M. Highsmith Highsmith # 441.000865, Used Used Motor Motor VVehicle ehicle Dealer Dealer License #2647, Au Auction ction Firm License #6980, Motor Motor Vehicle Vehicle Dealer Dealer License #0061711
Salt Lake City, UT (Shurtlefff & Andrews) Albuquerque, NM Raleigh-Durham, NC Wasilla, AK
Sep 30 Sep 30 Sep 30 Oct 3
Financing & leasing available
Bid in person or online ▸ No minimum bids or reserve prices ▸ Test and inspectt on-site ▸ Open to the public, free registration
More items added daily Call about selling: 1.800.211.3983
Up to 100% financing, with no moneyy down.
rbauction.com See full auction & equipment listing gs at rbauction.com