Northeast 26 2015 by Construction Equipment Guide

Published Nationally Northeast Edition

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

www.constructionequipmentguide.com

470 Maryland Drive • Ft. 30, Washington, PA •19034 215/885-2900 Free 800-523-2200 • Fax 215/885-2910 • www.ConstructionEquipmentGuide.com December 2015 • Vol. LIV No. 26 •• 470 Maryland Drive• •To Ft.llWashington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910

Inside

Bridge Deck Preservation Nears Completion By Brenda Ruggiero CEG CORRESPONDENT

Ground Being Readied for Tuxedo Farms Project...8

Schlouch Projects Keep Crews Busy...14

The West Virginia Division of Highways is nearing completion of a project to rehabilitate a total of 19 bridges along Interstate 64 in the Charleston area. The project began on April 4, 2015, and the original completion date was set for Oct. 28, 2015. However, it was extended due to weather and project issues. The $18 million contract was awarded to Kokosing Construction Company Inc., where Mike Koelbl is the vice president. Jason Jackson serves as the field engineer on the project. The contract calls for the rehabilitation of 19 bridges along Interstate 64, beginning at the Eugene Carter Memorial Bridge (also known as Fort Hill Bridge) and ending where the Brooks Street on-ramp enters the interstate. Numerous expansion joints will be replaced, repairs will be made to barriers, a latex modified concrete overlay will be applied to bridge decks, and several cathodic protection systems will be replaced. Four structures utilize the cathodic system,

WVDOT photo

The West Virginia Division of Highways is nearing completion of a project to rehabilitate a total of 19 bridges along Interstate 64 in the Charleston area.

which is a technique used to control corrosion of metal in the bridge deck. “Kokosing Construction is the first contractor in West Virginia to implement a traffic control

pattern known as contra-flow,” said Scott P. Love, PE, of Kokosing’s highway division. “The contra flow lane allows the public and see CHARLESTON page 112

President Signs Tax Extenders Bill Into Law Stephenson Equipment Hosts Rep. Barletta...22

Table of Contents ................4 Paving Section ..............55-71

On Dec. 18, President Obama signed into law tax extenders legislation that will extend more than 50 expired provisions of the tax code, including several key pro-business initiatives. Among the most vital aspects of the legislation, the extenders bill will expand and make permanent the Research and

Development (R&D) Tax Credit, providing U.S. companies much needed certainty and greater access to one of the most valuable and pro-growth tax incentives. The two key expansions to the R&D Tax Credit will begin in 2016. First and foremost, businesses with less than $50 million in gross

receipts will now be able to claim the credit against their Alternative Minimum Tax (AMT), thereby removing the single greatest barrier preventing companies from claiming the credit in the past. Secondly, the bill includes a provision that opens the credit up for startsee LAW page 120

Mini & Compact Section ........ ....................................75-103

Nov. Job Growth Up in Construction Industry

Snow & Ice Section..115-118

Strong demand for construction projects fueled job growth in November in 38 states compared to October and in all but six states over the past 12 months, according to analysis of Labor Department data released Dec. 18 by the Associated General Contractors of America. Association officials said, however, that the shortage of available workers was likely keeping firms from expanding headcounts even more rapidly in many parts of the country.

Parts Section....................119 Auction Section........124-141 Business Calendar ..........134 Advertisers Index ............142

“In nearly every state, contractors are busier now than a year ago,” said Ken Simonson, chief economist for the association. “Employment is up, but the industry would be expanding even more rapidly if contractors could find enough qualified workers.” Nationally, construction employment climbed by 4.2 percent from November 2014 to November 2015 — more than double the rate for total nonfarm employment, Simonson

noted. He added out that construction spending rose 13 percent in the latest 12 months, suggesting a need for even more workers. He cautioned that filling those openings may be difficult in many states because the number of unemployed jobseekers in November who last worked in construction was at the lowest November level in 15 years. see EMPLOYMENT page 120

Page 2 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2975 Galloway Rd., Bensalem, PA 19020 (215) 4 4 4-7047 • w w w.ransome.com /used

YOUR YOUR U USED SED EEQUIPMENT QUIPMENT S SOURCE OURCE 2014 CA CAT ATT 336EL 1,189 Hours

CAT CA AT H160DS H1 HAMMER

$330,000

2013 CA CAT ATT 314DLCR 1,644 Hours

2009 DEERE 410J 2,822 Hours

$135,000

R $59,900 $52,900 2,900 REDUCED!

ID# UP20591, Cab, AC, Hammer Lines, Quicker Coupler, GP Bucket + Recently Rebuilt CA AT H160DS Hammerr.. Zero Zer Hours Used Since Rebuild!

ID# CR30524, Cab, AC, HP & MP Lines, Quick Coupler, Rubber Pads, Leveling Blade, GP Bucket

2013 KUBOT KUBOTA TA A KX040-4 KX 234 Hours

2013 CA CAT ATT 308ECR A 1,517 Hours

2010 AP1055D 3,804 H Hours ours

2004 KOMA KOMATSU ATSU TSU PC308USLC-3

$49,000

$84,000

$199,000

$46,500

ID# UT10696, Cab, AC, Heat, Hammer Lines, Leveling Blade, 12” 24” 36” Buckets

ID# UP20578, Cab, AC, Heat, Hammer Lines, Quick Coupler, Leveling Blade, Rubber Tracks, GP Bucket

ID# UT10635, Electric Screed, Sonic Grade & Slope Controls, Extendable Screed, Generator System, Push Roller

ID# UT10688, Cab, AC, Hammer Lines, Quick Coupler, GP Bucket

2013 CA CAT ATT 321DLCR 321DLC 1,222 Hours

2013 CA CAT ATT TL943C A 943 Hours

2011 CA CAT ATT 930H 2,542 Hours

2012 CA CAT ATT 908H2 908 529 Hours

$199,000

$75,000

$129,000

$77,500

ID# CR30567, Cab, AC, HP & MP Lines, Quick Coupler, GP Bucket

ID# CR70046, Cab, Heat, Stabilizers, Aux Hydraulics, Foam Filled Tires, Quick Coupler, Forks

ID# UP20601, Cab, AC, Ride Control, Quick Couplerr, 3RD Valve, GP Bucket

ID# UP20606, Cab, AC, Ride Control, Quick Coupler, 3RD Valve, GP Bucket

ID# UT10650, Cab, AC, 4WD, Ride Control, E-Stick, Hammer Lines, es, TTwo wo Rear Buckets

12,820 Hours

Denny D enny TThompson hompson · Grason Grason JJones ones · ((215) 215) 444-7047 4 4 4-70 47 · w www.ransome.com/used w w.ransome.com /used dthompson@ransome.com dt hompson @ ransome.com *Call us for specific machine details and availability.

ggjones@ransome.com jones @ ransome.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 3

South Jersey Branch: 201 North Route 73 Winslow Township, NJ 08095 856-767-5900

Corporate Headquarters: 2820 Hamilton Blvd South Plainfield, NJ 07080 908-561-9000

WHAT’S NEW AT BINDER? Visit our new website @

www.bindermachinery.com

For all our new features and direct links to our manufacturer’s product pages. FOR PRICING OR MORE INFORMATION CALL: 888-460-7983 JIM CASENDINO - Used Equipment • jcasendino@bindermachinery.com South Plainfield, New Jersey

2013 KOMATSU D61PX-23 S/N 30066, 2083 Hrs, Cab, A/C, 34” Tracks, 6-Way Blade .......... ........................................................$195,000

2010 KOMATSU PC138US LC-8 S/N 24950, 1474 Hrs, A/C, 24” Steel Tracks, 8’2” Arm, 30” Bkt ............................................$118,500

2003 KOMATSU PC308US LC-3 S/N 20013, 7679 Hrs, 34” Tracks, A/C, 10’ Arm, Hyd. Kit, Coupler............................................$185,000

2013 KOMATSU PC360 LC-10 S/N A32817, 1798 Hrs, A/C, 34” Tracks, 10’ Arm, Hyd Kit, Coupler ..........................................$276,500

2009 KOMATSU D61PX-15E0 S/N B46224, 3006 Hrs, 34” Tracks, 6-Way Blade, A/C, OEM Paint ......................................$110,000

2007 METSO CV50 S/N 10174, 772 Hrs, 3” Top Screens, Slotted Bottom Screens, Towable ............................................$55,000

2006 INGERSOLL-RAND DD138HFA S/N 189731, 5213 Hrs, 84” Drums, HID Lights, Open ROPS ......................................$29,500

2003 INGERSOLL RAND DD130HF S/N 173474, 4189 Hrs, HID Lights, Cummins, 84” Drums ..............................................$29,500

2012 KOMATSU WA320-6 S/N A35214, 2567 Hrs, 3rd Valve, A/C, Coupler & GP Bucket ...... ........................................................$135,000

2012 KOMATSU WA320-6 S/N A35218, 8301 Hrs, 3rd Valve, A/C, 20.5 X R25 Tires, GP Bucket ..............................................$85,000

2003 KOMATSU WA500-3LK S/N A72055, 11,269 Hrs, A/C, 6.5cy G/P Bucket, Serviced & Painted ........................................$125,000

2005 LABOUNTY MSD4500 S/N 645052, Complete Rebuilt Shear for PC400 2nd Member ............................................$64,500

2007 HAMM 3307 S/N H1591159, 630 Hrs, 66” Drum..................................................$68,500 2013 WA470-7 S/N 10026, 1814 Hrs, A/C, GP Bucket ................................................$299,000 2005 HM4001-1 S/N A10011, 9217 Hrs, Primex RS300..............................................$195,000 1997 D155AX-3 S/N 60542, 366 Hrs, 26” Tracks, A/C, Semi-U Blade..........................$320,000

Page 4 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

norTheasT edITIon

In ThIs Issue

Founder, Publisher & CEO Northeast Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr.

8 14

To read these stories and many more, visit www.constructionequipmentguide.com

specIal secTIon

126 PETROWSKY HOLDS TWO-DAY MAJOR PUBLIC

75 MINI & COMPACT EQUIPMENT

The Dec. 11 auction included excavation, construction, compaction, paving, and crushing and screening equipment from Princess Equipment, NY Asphalt, Circle Line Carting and other area contractors.

Be sure to check out this special section!

AUCTION IN CONN.

Keep up to date with the latest information on mini and compact equipment.

128 J.G. COCHRAN HOLDS LIQUIDATION SALE FOR DAISY CONSTRUCTION

feaTures 8

AFTER DECADES OF PLANNING, TUXEDO FARMS PROJECT BEGINS

After nearly three decades of planning, excavation work has now begun on the Tuxedo Farms project.

14 SCHLOUCH INCORPORATED ENDS 2015 WITH SOLID MIX OF PROJECTS Schlouch Incorporated enjoyed a well-balanced portfolio of new business in residential, commercial and the public sector during the latter part of 2015, keeping the company’s fleet active throughout its market area. The company continues to focus on bringing its full range of capabilities to the table and to provide value-added service on time and on budget.

Circulated Throughout

J.G. Cochran held a complete liquidation auction for Daisy Construction Company on Dec. 16 in New Castle, Del.

130 UTILITY AUCTION SERVICES HOLDS FINAL AUCTION OF 2015 Utility Auction Services held its last auction of the 2015 calendar year on Dec. 18 in Wilmington, Del.

132 RITCHIE BROS. CONDUCTS DECEMBER MULTI-MILLION DOLLAR UNRESERVED AUCTION More than 2,750 bidders participated online and in person at Ritchie Bros.’ multi-million dollar unreserved public equipment auction in North East, Md., on Dec. 17.

Main office

Toll Free Fax Web site Editorial e-mail Advertising e-mail

•New Hampshire •Vermont •Connecticut •Rhode Island •New York •New Jersey •Delaware •Maine •Pennsylvania •Maryland/D.C. •Virginia •West Virginia •Massachusetts Edwin M. McKeon Sr. Edwin M. McKeon Jr. Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Tom Weinmann Cathy Printz

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910

www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com

For advertising rates: Contact

Edwin M. McKeon Jr. •New Jersey •Eastern Pennsylvania •Northern Maryland •Delaware 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 e-mail tmckeon@cegltd.com Kent Hogeboom •New York •New England •Northern Pennsylvania 315/866-1423 Toll Free 800/988-1203 Fax 315/866-1379 e-mail khogeboom@cegltd.com

Contact

Ed Bryden •West Virginia •Western Pennsylvania 440/268-9690 Toll Free 800/810-7640 Fax 440/268-9691 e-mail ebryden@cegltd.com

Contact

Bob Buckley •National •Central Pennsylvania 518/863-4100 Toll Free 800/992-7116 Fax 518/863-7100 e-mail bbuckley@cegltd.com

Contact

140 CEG TO AGAIN PARTICIPATE AT THE 22 U.S. CONGRESSMAN LOU BARLETTA VISITS STEPHENSON EQUIPMENT, DISCUSSES BILL U.S. Congressman Lou Barletta (R), representative of the 11th district in Pennsylvania, was at Stephenson Equipment Inc.’s (SEI) Harrisburg, Pa., facilities on Dec. 7.

22 OSHA RENEWS ITS ALLIANCE TO PROTECT ROADWAY WORKERS The Occupational Safety and Health Administration renewed its alliance with the National Institute for Occupational Safety and Health and Roadway Work Zone Safety and Health Partners to protect workers in roadway construction work zones from injuries, illnesses and fatalities.

46 FOLEY ANNOUNCES PROMOTIONS OF TOM ALFANO, SCOTT SARFERT Jeff Merle, vice president of machinery sales at Foley Incorporated announced that Tom Alfano has been promoted to used equipment specialist and Scott Sarfert has been promoted to machine sales general line account manager.

FLORIDA AUCTIONS The 2016 Florida Auctions are fast approaching and just like many of you, Construction Equipment Guide (CEG) is making its plans to attend the big sales in the greater Orlando area in February.

equIpmenT 55 CATERPILLAR B-Series Tandem Rollers 58 WIRTGEN SP 25i Concrete Slipform Paver 60 CHICAGO PNEUMATIC SR 140 Soil Compactor

deparTmenTs 122 CLASSIFIEDS 124 COMING AUCTIONS 134 BUSINESS CALENDAR

Mobile

Facebook

Twitter

YouTube

Construction Equipment Guide Northeast Edition (ISSN 1058-787X) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Northeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2015, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 5

SOLID PERFORMANCE

STARTS AT

$99,500. LG938L: 2.5 yd 3 / 160 hp

LG948L: 3.0 yd 3 / 173 hp

LG958L: 4.0 yd 3 / 224 hp

LG959: 4.0 yd 3 / 224 hp

$99,500*

$118,500*

$137,500*

$147,500*

When price and reliability are deciding factors, SDLG is your answer.. We offer four wheel loader models at industry-leading prices — they’re simple to operate, easy to maintain, and a perfect fit for your day-to-day jobs. Plus, our loaders are sold through an experienced, top-tier dealer network that's ready to support you any time you need them. Make the simple choice at sdlgna.com/na. * Prices are subject to change without notice. Visit sdlgna.com for details.

Lionville, PPAA (610) 363-9200

Frenchtown, NJ (908)

Deptford, NJ (856) 227-6400

Staten Island, NY (718) 448-2444

pennjerseymachinery.com

Page 6 Рђб December 30, 2015 Рђб www.constructionequipmentguide.com Рђб CONSTRUCTION EQUIPMENT GUIDE

YOUR NEEDS. UNEARTHED. Building your construction business together. Our G-Series Compact E xcavators may be VPDOO EXW WKH\┼цUH IXOO RI ELJ LGHDV IURP FRQWUDFWRUV DQG каHHW PDQDJHUV OLNH \RX )RU H[DPSOH D ZLGHU HQWU \ ZD\ ,PSURYHG YLVLELOLW \ $ WKLUG VHU YLFH GRRU IRU HDVLHU PDLQWHQDQFH DQG FRROHU FOHDQLQJ $QG D GHSHQGDEOH QR IXVV )LQDO 7LHU HQJLQH <RX DVNHG IRU PDFKLQHV WKDW DUH RSHUDWRU IULHQGO\ GHSHQGDEOH DQG HDV\ WR PDLQWDLQ :H PDGH VXUH WKH * 6HULHV GHOLYHUV 6HH IRU \RXUVHOI DW \RXU GHDOHU RU DW -RKQ'HHUH FRP H[FDYDWRUV

Featured Equipment (more available on www.jesco.us)

2006 JOHN DEERE 180CW WHEELED EXCAVATOR, DITCHING BUCKET AND COUPLER, 2268 HOURS

CASE 590SM LOADER, S/N 287351A1, 6289 HOURS

2010 JOHN DEERE 310SJ LOADER BACKHOE, S/N 1T0310SJPA0182085, 3372 HRS, HAS AUX HYDRAULIC, 10РђЎ6 ARM, RESERVE FAN AND REAR CAMERA, CALL FOR PRICE

KOMATSU WB 156 LOADER BACKHOE, S/N 073020A1, 5059 HOURS

KOMATSU PC400 EXCAVATOR, 14,658 HRS, ST# 011652A1, S/N 11652

KOMATSU WA380 WHEEL LOADER, STOCK# A64183A1, COUPLER WITH 4 YD GP BUCKET, 1107 HRS, CALL FOR PRICE

2011 JOHN DEERE 844K WHEEL LOADER, 7.5YD BUCKET, 5,709 HOURS

2006 JOHN DEERE 850J DOZER, STD 24" TRACKS, 128" SEMI-U BLADE, 6,965 HOURS

JESCO offers a large fleet of well maintained used equipment to special leasing deals that could be more cost-effective than renting. Powertrain and hydraulic warranties available on certain equipment when purchased. Contact your local sales rep for more information on ways that JESCO can save you money on used equipment.

www.jesco.us (800) 241-7070

Branch Locations: South Plainfield, NJ Рђб Fairfield, NJ Рђб Lumberton, NJ Рђб Beacon, NY Рђб Deer Park, NY Рђб Middletown, DE Baltimore, MD Рђб Frederick, MD Рђб Delmar, MD Рђб White Plains, MD Рђб Shrewsbury, MA

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 7

631/643-2605 www.allislandequipment.com

Serving Nassau, Suffolk and the Five Boroughs since 1970

Wishing everyone a Healthy and Prosperous New Year!

PUT US BACK ON YOUR BUCKET LIST. $// ,6/$1' DID. Genuine KOBELCO excavators are back and "MM *TMBOE is the authorized KOBELCO dealer for contractors in our area. We represent this top line of excavators because they’re recognized worldwide for outstanding quality, strong manufacturing support and competitive pricing. If you’re looking for excavators proven to drive increased productivity and profitability, maybe it’s time to add KOBELCO to your bucket list. Call "MM *TMBOE today.

www.KOBELCO-USA.com

Lowboy

Page 8 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

After Decades of Planning, Tuxedo Farms Project Begins

As massive mountains of hard granite are blasted and removed, initial roadways and building sites become evident.

After nearly three decades of planning, excavation work has now begun on the Tuxedo Farms project. Work is expected to continue over the next 10 to 12 years and the estimated total cost of the development is anticipated to exceed $1 billion. Located in Tuxedo, N.Y., approximately 20 miles north of the Tappan Zee Bridge, the building site expands over 1,250 acres of mostly hilly and hard rock terrain. Approximately 800 acres are being set aside as undisturbed for conservation, and initial excavation work will be in excess of $250 million. Approximately 1,200 homes will be constructed, mostly single family dwellings, along with the construction of some townhomes and apartments. The homes will be built in three phases — the first phase will include 700 apartments, townhomes and single-family units. Townhomes are expected to price out at about $450,000 per unit with single-family homes ranging around $1.5 million. Included in the project is $20 million worth of funding for a new wastewater treatment plant for the town of Tuxedo and Tuxedo Farms. The project also includes in excess of 100,000 sq. ft. of retail space and community structures such as a YMCA, along with recreational facilities, which would include playing fields, playgrounds, tennis courts and a pet park. The developer is Related Companies, one of the largest real estate developers in the world, headed up by its president, Stephen Ross. Brennan Construction has the earthmoving contract for all of Phase 1, which involves initially blasting and moving 800,000 cu. yd. (611,644 cu m) of very hard rock (granite) and doing the related fills. All of the rock blasted on the site not used in the fills is being processed to an aggregate material. No rock or excess material is leaving the site. The biggest challenge on this site is the rock itself, according to James Brennan,

John Haverkamp (L), sales representative of H.O. Penn, and James Brennan, president of Brennan Construction.

Brennan Construction president. “It is very hard, very abrasive, and runs very deep. It really has been doing a job on our buckets and our undercarriage,” he said. “We currently have Silver Valley Drilling & Blasting on site doing the shots [blasts] for us. Each shot/blast is yielding about 10,000 yards of materials.” Brennan Construction James’s father, Thomas Brennan, has been in business since 1961. He incorporated Brennan Construction in 1986. At that time A fleet made up almost entirely of H.O. Penn Caterpillar machines remove rock and the company had one machine, which was build roadway from the scene of the last blast. used for utility work. The company grew gradually, inventory expanded, and in 1993, the company tackled its first subdivision. In 1994, Thomas went to work with James. The company continued to experience strong growth until 2010, when the grips of the recession started to impact construction work in the New York Metropolitan area. Today, the focus of the company is almost entirely on heavy site work, the biggest of which is the Tuxedo Farms project. Thomas Brennan continues to work for the company every day, as an equipment operator.

Much of the area is wooded. As the area is developed many forested areas remain to enhance the beauty of the project.

Surviving Tough Times According to James Brennan, one of the biggest challenges of the company’s operation today is getting employees. “A good number of our new hires are recommended by current employees. In order for that to work, we have to be involved in long-term projects so we can offer employee see TUXEDO page 44

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 9

QUALITY USED EQUIPMENT VALUE V ALUE ALU & PERFORMANCE ASSURED

2012 CAT D3K2 LGP, OROPS, BLADE: PAT, ENGINE,EPA 4I,EU IIIB,MLIT 4, HYDRAULICS, 3 VALVE, STANDARD, BLADE, D3K LGP, ACCUGRADE, HOURS: 764, S/N: KLL00196, STOCK #: VKLL196 ......................$80,000

2013 CAT 930K, UNIT #: VRHN1360; 611 HRS, S/N: RHN01360 ............$179,000

2012 CAT D6T LGP VP, EROPS, AIR CONDITIONER, BLADE: PAT, HOURS: 2,838, S/N: KSB01345, STOCK NUMBER: TKSB1345 ...... ............................................$260,000

COMPACTORS - PADFOOT 2012 CAT 815F II, EROPS, AIR CONDITIONER, Tier 3, EU Stage IIIA emissions compliant, Hours: 2,596, S/N: BYN00678, Stock Number: VBYN678 ........................................................................................................................Call

EXCAVATORS - MINI (UP TO 12,000 LBS) 2013 CAT 303.5E CR, AIR CONDITIONER, BLADE: LEVELING, AUXILIARY HYDRAULICS, THUMB BRACKET, Hours: 256, S/N: RKY01583, Stock Number: TRKY1583 ..............................................................................................$47,000

COMPACTORS - SMOOTH DRUM 2011 BOMAG BW138AD-2, Hours: 520, S/N: 71857, Stock Number: 71857..........................................................Call 2012 CAT CB64, From Dealer's Rental Fleet, OROPS, Hours: 1,932, S/N: DJM00348, Stock Number: 11M0411 ........ ............................................................................................................................................................................$94,000

FORKLIFTS - TELESCOPIC 2012 CAT TL1055C, EROPS, FORKS: PALLET, CARRIAGE: SIDE TILT, STABILIZER, AIR CONDITIONING, FAN IN CAB, GOOD TIRES, Hours: 1,386, S/N: KDE00219, Stock Number: VKDE219 ................................................$99,500 2013 DIECI HERCULES 210.10, Used 2013 Dieci 210.10 Telescopic Handler Max Lift Capacity 46,200lbs Max Lift at Max Height 32,000lbs Max, Hours: 1,040, Drive: 4WD, Horsepower: 196, Capacity: 46,200 lb......................$279,000 2013 DIECI SAMSON 70.10, 15,500 LB MAX LIFTING CAPACITY 31 FT MAX LIFTING HEIGHT 18 FT MAX REACH 128HP, Hours: 179, Drive: 4WD, Horsepower: 128, Capacity: 15,500 lb............................................................$95,000

DOZERS - CRAWLER 2014 CAT D4K2 LGP, EROPS, AIR CONDITIONER, BLADE: PAT, TIER 4 INTERIM, BLADE ACCUGRADE READY, SYSTEM ONE, Hours: 778, S/N: KRR00440, Stock Number: VKRR440 ................................................................$124,000 2014 CAT D4K2 LGP, EROPS, AIR CONDITIONER, BLADE: PAT, ULTRA LOW SULFUR DIESEL FUEL, ENGINE, EPA 4I, EU IIIB, MLIT 4, HYDRAULICS, Hours: 1,415, S/N: KRR00390, Stock Number: VKRR390......................$112,000 2014 CAT D6K2 XL, From Dealer's Rental Fleet, SEAT: HEATED & VENTILATED, TRACK, 22", ES, XL, HD, GUARD, Hours: 972, S/N: WMR00495, Stock Number: 13M0638 ................................................................................$179,000 2013 CAT D6N LGP, EROPS, AIR CONDITIONER, Hours: 2,090, S/N: PBA00582, Stock Number: RCPBA582 ............ ..........................................................................................................................................................................$210,000 2013 CAT D6N LGP, Hours: 2,891, S/N: PBA00583, Stock Number: RCPBA583 ..........................................$184,000 2012 CAT D6N LGP, EROPS, AIR CONDITIONER, BLADE: PAT, Hours: 2,325, S/N: PBA00525, Stock Number: RCPBA525..........................................................................................................................................................$193,000 2011 CAT D6T LGP, Accugrade ready., EROPS, AIR CONDITIONER, BLADE: S, AUXILIARY HYDRAULICS, DIFF STEER, Hours: 3,398, S/N: ZJB00161, Stock Number: RCZJB161 ................................................................$229,000 EXCAVATORS - CRAWLER 2013 CAT 320EL, Hours: 1,576, S/N: WBK01620, Stock Number: RCWBK1620 ..........................................$185,000 2013 CAT 324EL, Call Rich @ 732-261-8424, Manual Thumb, 54" Bucket, Hours: 2,206, S/N: PNW01016, Stock Number: RCPNW1016 ......................................................................................................................................$199,000 2013 CAT 329EL, AIR CONDITIONER, AUXILIARY HYDRAULICS, UNDERCARRIAGE: LONG, Hours: 1,412, S/N: PLW01218, Stock Number: RCPLW1218..........................................................................................................$262,500 2013 CAT 336EL, Hours: 4,753, S/N: FJH00596, Stock Number: RCFJH596 ................................................$298,000 2012 CAT 336EL, AIR CONDITIONER, BOOM: 1 PIECE, STICK: MEDIUM, UNDERCARRIAGE: LONG, REAR VIEW CAMERA, 42" BUCKET, Hours: 3,874, S/N: BZY01304, Stock Number: TBZY1304 ........................................$220,000 2008 CAT 345DL, AIR CONDITIONER, COUPLER: QUICK, UNDERCARRIAGE: LONG, 66" BUCKET, Hours: 6,477, S/N: RAJ00285, Stock Number: RCRAJ285 ....................................................................................................$180,000 2011 CAT 390DL, CONSIGNMENT MACHINE. Located in the Los Angeles Area. Please call customer direct. Contact Joanna @ (732)885-3039, Hours: 3,750, S/N: WBT00156, Stock Number: CWBT156 ..................................$775,000

LOADER BACKHOES 2001 CAT 430D, Machine sold "as is, where is" with no warranty expressed or implied, EROPS, AIR CONDITIONER, STICK, Hours: 6,702, S/N: BNK00243, Stock Number: BNK243 ........................................................................$34,000 SCRAP PROCESSING / DEMOLITION EQUIPMENT 2012 EXODUS MX447HDR, Hours: 1,687, S/N: 447-11-071, Stock Number: 12M0079 ........................................Call

Used Parts • Quality Parts • Attachments Are you looking for a reliable source for quality used components and parts? Outback Parts is linked nationwide with three used parts networks, so finding dependable parts fast and conveniently is never a problem. Outback Parts also supplies replacement parts for Non-Cat® machines. So when you’re needing parts, call or visit us on-line. Call: 732/885-3005 Fax: 609/443-1146 jmeyer@foleyinc.com

www.outbackparts.com

2013 CAT 336EL, S/N: BZY02499, 2,503 HRS, UNIT#: RCBZY2499 ............$283,000

GENERATOR SETS 2007 CAT C15, 500kW Portable Caterpillar Genset Single Axle 5th wheel trailer 600+ gallon belly tank Weather Tight, Hours: 415, S/N: C5E00160................................................................................................................................$85,000 2010 CAT XQ400, DIESEL, RENTAL/MOBILE POWER MODULES, CAT BRAND GENSET, Powered by Cat C27 Diesel Engine, EPA: Tier 4 I, Hours: 3,342, S/N: N1B00101, Stock Number: Y2256 ................................................$270,000 2005 CAT XQ800, DIESEL, CAT BRAND GENSET, AUTO START, Powered by Cat Diesel engine 3412;, Portable Sound Attenuated Trailer, Hours: 6,763, S/N: TFT00427, Stock Number: Y2398............................................$165,000 2009 CAT XQ2000, DIESEL, CAT BRAND GENSET, AUTO START, XQ2000 Powered by Diesel Engine 3516C, EPA Tier 2, Portable Sound, Hours: 1,054, S/N: NAM00131, Stock Number: Y1960 ............................................$585,000 OFF-HIGHWAY TRUCKS 2003 CAT 725, Hours: 13,163, S/N: AFX00870, Stock Number: RCAFX870............................................................Call 2008 CAT 735, Hours: 5,773, S/N: B1N01001, Stock Number: TB1N1001 ....................................................$185,000 2011 CAT 740B, Rental Fleet unit., AIR CONDITIONER, BED: STANDARD, RETARDER, TAILGATE, ULTRA LOW SULFUR DIESEL FUEL, Hours: 2,464, S/N: T4R00412, Stock Number: 11M0272................................................$425,000 SKID STEERS - TRACK 2013 CAT 259B3, Hours: 757, S/N: YYZ04192, Stock Number: TYYZ4192......................................................$42,900 2013 CAT 289C2, Hours: 1,475, S/N: RTD01714, Stock Number: TRTD1714 ......................................................CALL 2012 CAT 299D, Steel lines have some rust. Tracks - Good, EROPS, AIR CONDITIONER, HEATER, BUCKET, HYDRAULICS: STANDARD FLOW, Hours: 1,040, S/N: HCL00454, Stock Number: HCL454 ............................$64,000 SKID STEERS - WHEEL 2013 CAT 226B3, OROPS, BUCKET, SELF LEVELING, Hours: 1,275, S/N: MWD05277, Stock Number: TMWD5277 .. ............................................................................................................................................................................$29,000 2000 CAT 236, OROPS, BUCKET, TIRES: 12 X 16.5 10PR GALAXY, SELF-LEVELING: NONE, BATTERY, STANDARD, 650 CCA, ALARM, Hours: 2,101, S/N: 4YZ01548, Stock Number: 4YZ1548 ....................................................$13,750 WHEEL LOADERS 2013 CAT 908H2, EROPS, AIR CONDITIONER, RIDE CONTROL, Hours: 823, S/N: JRD00634, Stock Number: VJRD634 ....................................................................................................................................................................Call 2013 CAT 930K, EROPS, AIR CONDITIONER, RIDE CONTROL, COUPLER: QUICK, AUXILIARY HYDRAULICS, Hours: 396, S/N: RHN01678, Stock Number: VRHN1678 ..........................................................................................$181,000 2011 CAT 938H, Solid tires 75% remaining, EROPS, AIR CONDITIONER, COUPLER: QUICK, LANE 2 ORDER, REGIONAL PKG.: NACD, PP7, Hours: 1,436, S/N: MJC01326, Stock Number: MJC1326..............................$155,000

ASK ABOUT OUR FLEET RESTRUCTURING OPTIONS. WE CAN HELP WITH ONE MACHINE OR THE E ENTIRE FLEET FLEET. T.. RICH CALIF CALIFANO ANO International & Domestic Used Equipment Sales & Purchasing

RCALIFANO@FOLEYINC.COM RCALIFANO@FOLEYINC.COM 732-261-8424

1-800-939-6611 855 CENTENNIAL IAL A AVENUE VENUE PISCATAWAY, PISCA ATAWAY, NJ 08854 WWW.FOLEYINC.COM/USED WWW.FOLEYINC.COM/USED

TOM ALF ALFANO ANO International & Domestic Used Equipment Sales & Purchasing

TTALFANO@FOLEYINC.COM ALFANO@FOLEYINC.COM 732-261-8430

Page 10 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

YOUR PLANS.

CARRIED OUT.

Building your landscape business together. To grow your business, you need equipment that’s seeded with your thinking throughout. And rooted in the needs of your company. No wonder our E-Series Skid Steers and CTLs are perennial favorites. YYo ou wanted more foot URRP :H DFKLHYHG LW E\ PDNLQJ WKH ƠRRUV ƠDW <RX ZDQWHG PRUH KRUVHSRZHU :H XSSHG it by 10 percent on our large-frame models. You wanted switchable controls. We of fer selectable ISO, H-pattern, and foot controls on all models. YYo ou wanted easier attachment hookup We hooked you up TTo o learn more, see your dealer or visit our website

WE RENT LONG FRONT EXCAVATORS AND EXCAVATORS WITH SHEARS AND PROCESSORS We have excavators for daily, weekly and monthly rentals.

PLASTERER EQUIPMENT CO., INC. Serving Contractors, Municipalities, and Industry since 1912 LEBANON, PA

SELLERSVILLE, PA

BETHLEHEM, PA

LEWISBERRY, PA

2550 E. Cumberland St. (717) 273-2616 • (800) 225-4001

3215 State Rd. (215) 258-5700 • (800) 523-2209

400 Stoke Park Rd. (610) 867-4657 • (800) 587-9790

640 Lowther Rd. (717) 938-6568 • (866) 787-0001

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 11

NEW ROGERS 40 TON PLATFORM IN-STOCK!! No-Foot Neck - 24' Deck Air Lift Flip 3rd Tri-axle weight 18,500# !! Rogers TAG 25XXL, Air Lift Front Axle, 235’s on Aluminum.

Rogers No-Foot, Custom 55 Ton, Heavy Lift Package, 26’ Clear, Bucket Cutout, Adjustable Width Bi-Fold Ramps, Rogers Blue Paint................ ............IN STOCK!

HEAVY LIFT PACKAGE!

NEW ARRIVAL! Rogers 50 Ton Gentle Riser, 25’ Clear, Bi-Fold Ramps, Cut Out, 275’s on Aluminum, Night Lights, Strobes ..............................................................IN STOCK!

Rogers TAG 25XXL, 3-Down Suspension, 215’s on Steel Disc. Rogers TAG 21XXL’s, 235’s on Aluminum, Red & Black Paint.

IN STOCK!

NEW ARRIVAL! ASK ME ABOUT AIR RAMPS!

Rogers 40 ton Custom, 24' clear, Cutout, Adjustable Width Bi-fold Ramps, 275's, Aluminum, Air Lift Flip 3rd, Tri-axle weight 18,000lbs, Black or Red ................IN STOCK!

New Rogers 55 ton CobraNeck, 26' clear deck, custom bucket cutout, 275's, twinbag air lift, strobes.... ..............IN STOCK!

Rogers Custom CR55PL110, No-Foot Neck, 25’ Clear Deck, Adjustable Width Bi-Fold Ramps, 275’s, Aluminum, Night Lights, Strobes, Mack Green ..............IN STOCK!

Rogers 55 Ton, 25’ Clear, Wedge Style Front, Custom 5th Wheel Height, Air Lift 3rd, Air Lift Flip 4th....IN STOCK!

Rogers 50 Ton Custom, 24' clear, Cutout, Adjustable Width Bi-fold Ramps, Reinforced Wheelcovers, 275's, Aluminum, Air Lift 3rd ........IN STOCK!

NEW ARRIVAL!

WEDGE FRONT!

NEW ARRIVAL!

Page 12 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contractors Equipment & Supplies

FOR SALE OR RENT Rentals - Sales - Service - Parts - Training Link-Belt 210X3 Excavator • New ergonomic & advanced cab design • Cycle time improvements of 3% - 5%! • Operating weight: 47,840 lbs • Max dig depth: 21’10” ft/in • Bucket digging force: 34,170 lbf

Great Financing Options Available!

Wacker Neuson 803 Dual Power Excavator • Two drive options: Diesel and electro-hydraulic drive • Emission-free if neccessary • Operating weight min.: 2,399 lb • Breakaway force: 2,000 lbf

We are a Full Service Dealer/Distributor Dingo TX 1000 Wide Track

• Increased load capacity & greater reach at full height • Hinge Pin Height: 81” • Operating Capacity: 1,075 lbs • Ground Clearance: 6”

Items Available for Sale or Rent!

Gehl RT210 GEN: 2 Track Loader • IdealTrax™ Automatic Track Tensioning System • Gross Power @ rpm: 72 hp @ 2500 • Operating Capacity: 3,000 lbs.

New Product Offering

Call Rich Hess

Visit Our New Location! 1010 Conshohocken Rd., Conshohocken, PA 610-279-5777

www.NorrisSales.com Sicklerville, NJ 856-740-1400

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 13

Page 14 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Schlouch Incorporated Ends 2015 With Solid Mix of Projects

A crew paves Hanoverville Road, which serves the new Prologis L.P. facility.

Schlouch Incorporated enjoyed a well-balanced portfolio of new business in residential, commercial and the public sector during the latter part of 2015, keeping the company’s fleet active throughout its market area. The company continues to focus on bringing its full range of capabilities to the table and to provide value-added service on time and on budget. Here are a few of the projects keeping Schlouch’s teams productive through the fall and winter months: Berks County The Township of Muhlenberg has named Schlouch Incorporated to provide reconstruction services for 1.25 mi. of Hay Road Phases 2 and 3 in Muhlenberg Township, Berks County, Pa. Schlouch is providing survey, stakeout, earthwork, sediment/erosion control, storm sewers, water line installation, roads, concrete and paving. Work will be completed in fall 2015.

and 23 townhouses. Called Washington Square Phase 2, the project is located in East Vincent Township, Chester Crews load earth at Majestic Bethlehem Center in Lower Saucon Township, County, Pa. Schlouch is pro- Northampton County, for Commerce Construction Co. L.P. viding clearing, grubbing, survey, stakeout, blasting, rock removal, earthwork, sediment/erosion control, sanitary and storm sewers, water line installation, roads, building pads, curbs, paving and seeding. Work will be completed in the fall 2015. Liberty Commercial Development Corporation has selected Schlouch Incorporated to prepare the site for Oakcrest Phase II, a residential community featuring 63 single-family homes. Oakcrest is located at Glencrest Road and see SCHLOUCH page 34

Chester County Hankin Commercial Construction, Ltd. has selected Schlouch Incorporated to prepare a 5.8-acre site for the 20-unit Northwyn Court Apartments at 803 East Boot Road, West Chester, West Whiteland Township, Chester County, Pa. Schlouch is providing clearing, grubbing, survey, stakeout, earthwork, sediment/erosion control, sanitary and storm sewers, water line installation, curbs and paving. Work will be completed in spring 2016. Charnwood Property Group LLC has named Schlouch Incorporated to Emergency Response has become an important part of the services offered by An SI pipe crew sets a segment of sewer pipe on the prepare the residential site Schlouch. A Schlouch team responds to a waterline break on State Hill Road in 35-acre Woodmont at Upper Macungie project, a resfor 16 single-family homes Wyomissing for Pa., American Water Company. idential development in Lehigh County.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 15

Page 16 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WHEN YOUR JOB IS ON THE LINE GET H.O. PENN RENTALS ON THE LINE

LLike ike uuss on on Facebook Facebook Key word : H.O. Penn Machiner y

1-888-RENT-CAT w w w.hopenn.com

Since 1923

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 17

Wishing you a Healthy and Prosperous New Year! from your

Celebrating Celebrating

danbury, holbrook & yonkers Ehrbar Team!

Thank you to our valued team and customers!

112100 YEARS OVER YEARS

Model

EE#

PRICE

CRAWLER DOZERS/LOADERS KOMATSU 2012 D65WX-17 1994 D275A CATERPILLAR 1995 D3C-XL 2003 D7R-LGP 2000 D9R 2001 963C

C005727 C020148

$195,000 P.O.R.

C006466 C020149 C020150 C019429

$22,500 P.O.R. P.O.R. $57,500

EXCAVATORS CATERPILLAR 1998 320BL-L 2004 321C-LCR 2000 345BL 2005 M318C HITACHI 2004 ZX800 “ZAXIS” JOHN DEERE 2012 85D KOBELCO 2012 SJK210LC-9 KOMATSU 2007 PC78MR-6 2011 PC138USLC-10 2006 PC160LC-7 2014 PC210LC-10 2006 PC220LC-8LR 2005 PC228USLC-3 2013 PC228USLC-8 2013 PC240LC-10 2013 PC290LC-10 2003 PC300LC-7 2010 PC350LC-8 2011 PC360LC-10 2013 PC360LC-10 2004 PC400LC-5 2010 PC450LC-8 2010 PC450LC-8 2010 PC450LC-8 LIEBHERR 2006 A900C

C020143 C006409 C006594 C006797 C008172 C019645

P.O.R. $69,500 $89,500 $62,500 $279,000 $62,500

C019951

P.O.R.

C019961 C019465 C019949 C006317 C001119 C019958 C006264 C006323 C006321 C019345 C006316 C006350 C006325 C006167 C005952 C005953 C003313

P.O.R. $89,500 P.O.R. $199,500 $119,500 P.O.R. $145,000 $236,500 $205,500 $99,500 $139,000 $199,000 $269,000 $32,500 $239,000 $239,000 $249,000

C003281

$129,000

Model

EE# MATERIAL HANDLERS, RECYCLERS

FUCHS 2005 MHL350D 2005 Grapple for MHL350D 2007 Grapple for MHL350D SENNEBOGEN 2004 830

PRICE

C003296 C003297 C003670

$114,000 $8,000 $4,000

C005918

$69,500

C003420 C003433 C004620

$90,000 $128,500 $139,500

GRADERS KOMATSU 2001 2005 2008

GD650A-2 GD655-3C GD655-3E0 WHEEL LOADERS

KOMATSU 2012 1994 1997 1999 2004 2012 2013 2013 2004 2010 2013 1999

WA320-6 WA380-1L WA380-3 WA380-3 WA450-5L WA470-6 WA470-7 WA470-7 WA480-5 WA480-6 WA500-7 WA600-3

C002729 C020144 C006463 C019642 C005904 C006410 C006216 C019954 C006219 C006269 C006513 C006043

$159,000 P.O.R. $49,500 $29,500 $89,000 $205,000 $290,000 P.O.R. $42,500 $129,500 $319,500 $99,000

C006407

$29,500

C019255 MILLERS, PAVERS, ROLLERS

$19,500

BACKHOES CATERPILLAR 1998 446B TRACTORS JOHN DEERE 3320 BOMAG 1999 CARLSON 2011 DYNAPAC 1999 GEHL 1999 HAMM 2007 2011

BW100AD-4

C019384

$9,900

CP90

C005212

$89,500

CC522

C005488

$29,500

1438

C006470

$14,500

HD12VV HD+120VVHF

C006565 C004069

$12,500 $154,648

Representing These Fine Lines of Equipment: WIRTGEN • VOGELE • HAMM • KLEEMANN • FUCHS • NPK • TROUT RIVER • JCB DOPPSTADT • JRB • BROCE • BAGELA • CARLSON • ROGERS BROS • ESCO • LA BOUNTY • KOMATSU • FELLING

YR Model INGERSOLL RAND DD24 DD24 LEEBOY 2010 8816B VOGELE 2010 5100-2 WIRTGEN 2011 W200 2011 W200 1999 WR2500

EE#

PRICE

C006532 C019091

POR $12,500

C006298

$89,500

C020154

P.O.R.

C007064 C007065 C019344

$349,000 $349,000 $179,500

CR50PL

C008064

$32,500

T3000

C005919

$200

U-TILT

C005923

$750

50 Ton

C006357 CRUSHING & SCREENING EQUIPMENT

POR

TRAILERS ROGERS 2003 STOW 1993 U-HAUL 2002 VALUE 1986 CEC 2007 METSO 2008 2004

CEC 32”x54” jaw crusher

C003725

REDUCED $159,000

CV50 ST171

20912 C005992

$39,500 $79,500

96” pin-on forks for WA480

C003759

$16,500

UP20 pulverizer jaw set CP60 pulverizer (PC200/PC308 linkage)

18715

$4,500

C000879

$29,500

ATTACHMENTS HAMM 2012 JRB 2012 LaBOUNTY 2003 2009

Pad-foot shell kit for 3412, 84” Drum

P.O.R.

NPK 2010 GH4 C005986 2008 GH15 C002364 ROCKLAND 2009 BTH-D-CL hydraulic thumb C000380 HD-V spade-nose rock bucket for WA500-3 CATERPILLAR 345 ATTACHMENTS CATERPILLAR 52” EXCAVATING BUCKET C006595

$10,500 $49,000 $7,500 $15,000 $3,900

Contact: Hank Ruttura • Holbrook Office

631-563-7600

DENOTES KOMATSU CERTIFIED REMARKETING USED MACHINE DEPENDING ON CERTIFIED GRADE, UNIT MAY QUALIFY FOR SPECIAL FINANCING RATE AND/OR MANUFACTURER SUPPORTED WARRANTY. PLEASE CONTACT US FOR ADDITIONAL DETAILS ON THESE OR ANY OF THE ABOVE MENTIONED USED PIECES.

www.ehrbar.com

Page 18 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Voorhees, NJ 800-232-6535 Allentown, PA 800-383-8894 Portland, ME 800-325-4253 Springfield, MA 800-854-5306

Baltimore, MD 888-601-7500 Walpole/Boston, MA 800-854-5310 Scranton, PA 800-569-1400

Elkton, MD 800-544-7127 Delmarva, DE 866-486-1400

HALE HAS IT!

www.haletrailer.com

New Heavy Haul Arrivals Llamé NJ para empleado qué habla español • 800-232-6355 Ext. 193

IN STOCK

New Fontaine 3+3+3 80 Ton Widespread Lowboys, Available in Flat Deck & Drop Side Deck, All Components Available, Call for More Info IN STOCK

New Fontaine Steel Flatbeds, 48’ x 102” Spring Sliding Suspension, Winches & Bulkhead Included

New BWS EZ-2 Load Paver Equipment Hauler, 53’x102”, Air Ride Tri-Axle Suspension, Air Operated Paver Ramps & Upper Deck Ramp

New Fontaine Velocity Steel Drop Decks, 48’x102”, Air ride Spread, Bulkhead and Winches

Excellent We Rent Lowbeds Financing We Rent Walking Floors Available

IN STOCK

New XL Specialized 85 Ton Light Weight Lowboy, 30’x120” Air Ride, 3+3+3 Capable, Call for more information

Used 2010 Etnyre 85 Ton Lightweight 13 Axle Trailer, Includes 3 Axle Jeep, Power Tower Bump Steer 9’ Wide, Flat Floor

New Talbert and Etnyre 65 Ton Wide Spread Capable Lowboys IN STOCK

IN STOCK

New East walking floors, 48' long x 102" x 13', spring suspension; Keith walking floor installed. Also available, used aluminum refuse trailer.

New East Beast Aluminum Flatbeds, 48’x102” Air Ride Spread, Coil Pkg Sliding Winches, Alum. Wheels

New Manac 87 Cu. Yd. Hardox 450 Steel Dumps, 40'x102"x100" single point susp., barn door, 11R245 tires

2013 Manac Steel Single Drop Extendables, 53’-71’ x 102”, Air, Tri-Axle Suspension, Center Axle Lift, 8 Hole Steel Disc Wheels

New Talbert 20 Ton Tag Trailers, 21’x102”, Spring Suspension Wood Filled Ramps

New Fontaine & Talbert Dropside 55 & 60 Ton Lowboys, 26' Deck, 22.5 Wheels, Air-Ride/ Air Lift and Modular Available

New Talbert 35 Ton Lowboys 22" Deck Height, Air Ride Suspension

New Landoll Slide Axle Trailers, 50'x102", Air Ride Suspension, 20K Winch, Wireless Remote, PSI System & Dock Levelers Optional

NEW TALBERT & FONTAINE 5O & 55 TON LOW BOYS, Flat Level Deck & Raised Center, 25’ & 26’ Deck Lengths, (2) King Pin Locations, Automatic 3rd Axle Air Lifts, 275/70R 22.5, 3+1 Capability, In Stock!

www.haletrailer.com

We Rent Lowboys, Blade Trailers, Etc.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 19

People, Products & Service….you’ll dig!

RENTALS • SALES • PARTS • SERVICE One Location, Multiple Choices

Part of the Atlas Copco Group

For our complete line of rental equipment visit

www.harterequipment.com

Page 20 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2006 National 18142 40-Ton, 142’ Boom, Two Winches, SFO, 1290 lb. Counterweight, Western Star 4900FA, MBE4000 450HP 12.8 Liter, 13,200 lb. Tag Axle, Air Shift PTO, stk8730 $209,500

2015 Merlo Roto 45.21MCSS Telehandler, 10,000 lb. Max. Lift Capacity, 68’2” Max. Lift Ht., 4WD, Hyd Carriage Disconnect, Rear Axle Align Indicator, Work Lights on Boom & Cab Front & Rear, AC, Cold Start Kit, 6’6” Jib, 48” Forks, 1.75yd3 Bucket, Aerial Work Platform, Reduced Height Crane Boom, stk8469 ....................$POR

2011 National NBT45, 127’ Boom, Calib for Jib, Heat & AC, Drum Rotat Indicator, 4500 Lb. Ctwt, Peterbilt 365, Cummins 380HP, Jacobs C Brake, stk8559 ..................................................$349,500

2003 Grove TMS900E, 90-ton, 142’+56’, 2 Winches, 35T Block, 8T Ball, Hyd Luffing Jib, Hyd Tilting Cab, Cummins ISM 450HP, Roadranger 11 Spd, stk8397 ................................................$POR

2014 Maeda LC785, 51’ Boom, 53’6” Max. Lift Height, A2B, Block, 2-Speed Winch, Pick & Carry, Zero Rear Tail Swing, 9” Side Tail Swing, Komatsu Diesel, stk7893 ............................................$POR

1997 Link-Belt HTC8670, 70T, 115’+61’, 2 Winches, Block, Ball, 16,000lb. Ctwt, LCF2000 Composite Cab, Detroit 60 365HP, Eaton Fuller, stk4175 ........................................................$POR

2014 Maeda MC285-2, 28’ Boom, Hookblock, Gas & Propane, Cable Remote Control, 244 Hours ....................................................................$POR

2015 National 13110A, 110’ Boom, Calibration for Jib, Peterbilt 348, 350HP, Ctwt on Turret, 18’ Steel Deck w/Ladder, stk8165 ......................$POR

2014 National 800D, 100’+44’, 12.5-Ton Blk, 22’ SD Wood Bed, SFO, Air Shift PTO, 2015 Peterbilt 348, stk8162 ................................................$POR

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 21

Liebherr Equipment Now Available For Earthmoving and Material Handling

Wheeled Excavators

Dozers

Scrap Handlers

Wheel Loaders

Call the location nearest you today! www.hoffmanequip.com New Jersey

New York

Page 22 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

U.S. Congressman Lou Barletta Visits OSHA Renews Its Stephenson Equipment, Discusses Bill Alliance to Protect

Roadway Workers

The Occupational Safety and Health Administration renewed its alliance with the National Institute for Occupational Safety and Health and Roadway Work Zone Safety and Health Partners to protect workers in roadway construction work zones from injuries, illnesses and fatalities. The renewed alliance will continue for five years. The alliance promotes a culture of safety in the roadway construction industry, especially among non- and limitedEnglish speaking workers. Members collaborate to reduce workplace incidents, especially preventing worker exposures to run-over and back-over hazards, excessive noise, sprains and strains, and illnesses related to silica exposure. “Employees who work in highway construction work zones face serious dangers, not only from construction equipment but from motorists as well,” said Assistant Secretary of Labor for Occupational Safety and Health David Michaels. “I am confident that the information and resources generated from this renewed alliance will prove beneficial in reducing worker injuries and fatalities.” Created in 2007, the alliance has developed case studies on worker fatalities in roadway work zones, produced an (L-R): Robert Criste, Dave Donati, U.S. Congressman Lou Barletta, and Dennis Heller discuss how Stephenson Infographic on the causes of the fatalities, and contributed to Equipment is affected by the Highway Bill and Section 179/Bonus Depreciation. the development of documents and training courses to prevent falls and other construction safety hazards. The Roadway Work Zone Safety and Health Partners have disU.S. Congressman Lou Barletta (R), representative of the 11th district in Pennsylvania, was at Stephenson Equipment tributed information on OSHA’s campaigns to prevent falls Inc.’s (SEI) Harrisburg, Pa., facilities on Dec. 7. The conin construction and reduce the risks of heat illness. gressman, who has visited the location before, requested the Signatories include the American Road and meeting with Stephenson to discuss his future sustainable Transportation Builders Association; National Asphalt highway funding ideas and the recent house approval of the Pavement Association; Laborers’ International Union of highway bill with congressman Barletta’s priorities in place. North America (LIUNA); Laborers’ Health and Safety Fund Meeting with Stephenson’s President Dennis Heller, EVP of North America; LIUNA Training and Education Fund; and CFO Robert Criste, and VP and Wilkes-Barre Branch International Union of Operating Engineers; Associated Manager Dave Donati, the Congressman also discussed General Contractors of America; International Safety bonus depreciation legislation and his feelings that it should Equipment Association; and American Association of State get passed before the end of the year. Highway and Transportation Officials. Stephenson Equipment takes pride in being active in the Through its Alliance Program, OSHA works with unions, political arena and realizes the importance of sharing the consulates, trade and professional organizations, faith- and voice and view of a local company involved in the heavy community-based organizations, businesses and educational equipment and highway industry with lawmakers like institutions to prevent workplace fatalities, injuries and illBarletta. In a recent press release, Barletta expressed his disap- U.S. Congressman Lou Barletta (L) discusses the nesses. The purpose of each alliance is to develop complipointment with the offsets in the highway bill and feels it is effects of the recently passed Highway Bill and Section ance assistance tools and resources and to educate workers irresponsible that neither the house nor the senate has 179/Bonus Depreciation with Stephenson President and employers about their rights and responsibilities. worked on serious reforms that will provide the Highway and CEO Dennis Heller. Alliance Program participants do not receive exemptions Trust Fund with a sustainable funding source. from OSHA inspections or any other enforcement benefits. In their meeting the Congressman told SEI that he looks struction, highway building and road maintenance equipFor more information, visit www.osha.gov. forward to working with his colleagues on policy ideas that ment sales, rentals, parts and service. (This story also can be found on Construction Equipment Heller said, “It is great to have someone like Lou in office, Guide’s Web site at www.constructionequipmentguide.com.) could be included in a comprehensive bill to ensure the Highway Trust Fund has a sustainable funding source his background in road construction and as a mayor are of great value in his position on the House Transportation and longterm, said Dennis Heller SEI president and CEO. Stephenson Equipment met with the Congressman for Infrastructure Committee, and it shows by his efforts to Visit CEG’s Web Site at several hours and discussed their views on how the Highway secure a number of victories in the highway bill for transportation safety, reduced regulation and just plain common Bill affects them and the importance of sustainability of the Highway Trust Fund to a local business like SEI. Stephenson sense.” (This story also can be found on Construction Equipment Equipment employs 140 employees at its six locations across Pennsylvania and New York, offering cranes, con- Guide’s Web site at www.constructionequipmentguide.com.)

www.Construction EquipmentGuide.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 23

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees WHEEL LOADERS

Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25 rubber, 15K hours, work ready . . . . . . . . . . . .$42,500 Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . . . .$79,500 John Deere 624G, 1996, EROPS, quick coupler, GP bkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$46,000 Volvo L60E, 2005, EROPS, coupler, aux hyd, boom susp, 20.5R25, v. good . . . . . . . . . . . . . . . . . .$89,500 COMPACTORS

IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean $69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000 (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500 LANDSCAPING

Case/IH 485 Utility Tractor, 1986, Case 3 cyl dsl engine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd angle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500 CRAWLER LOADERS

Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt .$37,500 Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000

OFF ROAD HAULERS Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready . . . . . . . . . . . . . . . .$127,500 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites . . . . .$87,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 CRAWLER TRACTORS

Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6" TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000 (5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALL Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB coupler, plumbed, 8’6” width, nice, work ready . .CALL Volvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing very good condition . . . . . . . . . . . . . . . . . . .$159,000 TRUCKS & TRAILERS

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL AIR COMPRESSORS

IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL SPECIALS

(12) Allmand Light Plants, 2008-2010, diesel, s/a towtype, (4) MH lights, excellent . . . . . . . . .From $5,200

(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, BACKHOES winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea. Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000 Case 580L Rubber Tire Loader Backhoe, 1997, (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea. DRILLS John Henry Drill Mtd on Cat 320N, 1994, 24' mast, CRANES Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, Duraquip dust collection . . . . . . . . . . . . . . . .$150,000 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 MISCELLANEOUS Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom (2) Balderson Broom Attachment for Cat IT Machines, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. MOTOR SCRAPERS

ATTACHMENTS Cat 613C Water Wagon, 1994, 5000 gal drop tank, BUCKETS ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 PC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good Over 100 Excavator, Loader, Specialized & Grapple condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Buckets in Stock Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice -Call For Your Needs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, HYDRAULIC EXCAVATORS excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick couOthers Available Call pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000 Prices Are Negotiable - At Your Inspection Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber, All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC. operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER

Page 24 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NOW IS THE TIME TO BUY A DOOSAN WHEEL LOADER AT

SHOP NOW BEF ORE W IN T ER W E AT HER HI T S! RIGHT NOW AT BEST LINE EQUIPMENT RECEIVE

PLUS GET A

% APR $ OR

FOR UP TO 36 MONTHS

when you purchase a new Doosan Wheel Loader

15,500 *

UP TO IN REBATES IN LIEU OF FINANCING.

See Why Doosan is the Fastest Growing Equipment Manufacturer in the World!

ALLENTOWN

HARRISBURG

SHIPPENSBURG

STATE COLLEGE

TOWANDA

UNIONTOWN

WEST CHESTER

1315 Hausman Rd.

6700 Allentown Blvd.

8001 Possum Hollow Rd.

140 Hawbaker Industrial Dr.

183 Tomahawk Rd.

2266 University Dr.

515 South Bolmar St.

Give us a call today or visit our website. | 1-800-679-BEST | www.BestLine.com | Find Us On: *Offer ends December 31, 2015. Available at participating and eligible dealers only. Offer may vary by product type, series, model and select units in dealer inventory. Offers available on new equipment in US and Canada only. Some restrictions apply. Length of contract may vary. Prior purchases not eligible. See dealer for details. Financing provided on approval of credit by authorized Doosan finance providers to well qualified buyers. The rates listed herein do not take into consideration any administrative fees and are subject to change based on the amount of such fees (which may vary). Offer not available to government accounts, national accounts, municipal/utility bid customers and non-commercial customers. Doosan Infracore reserves the right to extend or discontinue any of these programs at any time without prior notice. See Best Line Equipment for warranty details. Dealer not responsible for typographical errors. Photos for illustration purposes only and may not represent actual units. 15BLDO-NHC-CEG123015

Authorized Dealer

Sand & Gravel Wash Plant

6x20 Telsmith Portable Triple Deck Wash Screen, 70-ton bins (3), 24” portable radial stacking conveyors (3), 4 misc truss conveyors, 2 channel conveyors, 8x6 50 hp Linatex sand pumping system (2), 4x7 Deister heavy duty single deck scalper, Greystone 48x32 twin screw washer, 6" spacing remote controlled hydraulic grizzly system, powerhouse with starters, control center, storage containers, steel catwalks throughout. Tech Weight scales (4) with master totalizer. 80% components new in 2012. Located in Massachusetts. May be seen operating. Available December 1, 2015. Price upon request.

Lawrence-Lynch Materials Corp

508-548-1800 • www.lawrencelynch.com

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ December 30, 2015 â&#x20AC;¢ Page 25

Pine Bush Equipment Classes: Classes are customized to suit your needs. Your location, or The PBE Training Center in Pine Bush, NY Forklift Class 7 Rough Terrain Forklift Class 5 Industrial Aerial Lifts Scissors and Booms Bucket Truck Certification Heavy Equipment Class: Excavator Backhoe Bulldozer Skid-steer and much more

GHS Class Work Zone & Flagging Class Trench Safety and Shoring

Do great things with Kubotaâ&#x20AC;&#x2122;s KX Series compact and utility excavators.

Chain Saw & Wood Chipper Class

0 Down, 0% Financing for 60 Months

NEW - Workplace Violence

A.P.R.

Confined Space Ventilation

Offer ends 12/31/15.

Confined Space Atmospheric Testing GRZQ $ 3 5 IRU PRQWKV RQ QHZ .XERWD .; 6HULHV (TXLSPHQW LV DYDLODEOH WR TXDOLÂ¿ HG SXUFKDVHUV IURP SDUWLFLSDWLQJ GHDOHUVÂ¶ LQ VWRFN LQYHQWRU\ WKURXJK ([DPSOH $ PRQWK PRQWKO\ LQVWDOOPHQW UHSD\PHQW WHUP DW $ 3 5 UHTXLUHV SD\PHQWV RI SHU Â¿ QDQFHG $ 3 5 LQWHUHVW LV DYDLODEOH WR FXVWRPHUV LI QR GHDOHU GRFXPHQWDWLRQ SUHSDUDWLRQ IHH LV FKDUJHG 'HDOHU FKDUJH IRU GRFXPHQW SUHSDUDWLRQ IHH VKDOO EH LQ DFFRUGDQFH ZLWK VWDWH ODZV ,QFOXVLRQ RI LQHOLJLEOH HTXLSPHQW PD\ UHVXOW LQ D KLJKHU EOHQGHG $ 3 5 $ 3 5 DQG ORZ UDWH Â¿ QDQFLQJ PD\ QRW EH DYDLODEOH ZLWK FXVWRPHU LQVWDQW UHEDWH RIIHUV )LQDQFLQJ LV DYDLODEOH WKURXJK .XERWD &UHGLW &RUSRUDWLRQ 8 6 $ 'HO $PR %OYG 7RUUDQFH &$ VXEMHFW WR FUHGLW DSSURYDO 6RPH H[FHSWLRQV DSSO\ 2IIHU H[SLUHV 6HH XV IRU GHWDLOV RQ WKHVH DQG RWKHU ORZ UDWH RSWLRQV RU JR WR ZZZ NXERWD FRP IRU PRUH LQIRUPDWLRQ 2SWLRQDO HTXLSPHQW PD\ EH VKRZQ

kubota.com

www.kubota.com

www.pbeinc.com

Â© Kubota Tractor Corporation, 2015

For more info contact Lee Drake: 845-399-5750 or e-mail: ldrake@pbeinc.com Join the many townships that support our training classes

SALES â&#x20AC;¢ RENTALS â&#x20AC;¢ PARTS â&#x20AC;¢ SERVICE â&#x20AC;¢ TRAINING

Equipment Pine Bush Co, Inc.

Holmes, NY Branch

East PBE, Inc.

97 Route 302 Pine Bush, NY 12566

24 Sybil Court Holmes, NY 12531

283 Pane Road Newington, CT

Phone: (845) 524-0970 Call Karie (ext 230)

Phone: (845) 524-0972 Call Damien (ext 215)

Phone: (845) 524-0974 Call Lisa (ext 232)

Our Holmes, NY Branch is a NAPA Auto Parts Location

Page 26 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LIS

TIN

2005 CAT 320CL HYDRAULIC EXCAVATOR, ID# UT14312, 8448 HRS, CAB, AIR CONDITIONING, BUCKET, AUX HYDRAULICS, UC @ 8441HRS:, 24IN SG SHOES 57-60%, BUSHINGS 44-60%, LINKS 50-60%, SEGMENTS 45%, IDLERS 60/82%......................................................$88,000

2007 CAT 312CL HYDRAULIC EXCAVATOR, ID# UT14090, CAB, AIR CONDITIONING, RADIO, PATTERN CHANGER, UC @ 12033HRS, 24IN TG SHOES 77-81%, BUSHINGS 18-21% NOT TURNED, LINKS 51%, INTERNAL TRACKS 15%, SEGMENTS 75%, IDLERS 76% ....$68,000

2008 CAT 321DLCR HYDRAULIC EXCAVATOR, ID# UT14781, CAB, AIR CONDITIONING, AUXILIARY HYDRAULICS, HYDRAULIC QUICK COUPLER, BUCKET, PLUMBED FOR HAMMER USE, UC @ 8093HRS: 32IN SHOES 94% REM, BUSHINGS 46%, LINKS 39%, SEGMENTS 30%, IDLERS 52%, 8093 HRS........................$105,000

2004 CAT 314C LCR HYDRAULIC EXCAVATOR, ID# UT13117, AUXILIARY HYDRAULICS, CAB, AIR CONDITIONING, HYD QUICK COUPLER, UC @ 8509HRS, 24IN TRIPLE GROUSER SHOES 63%, IDLERS 80%, ROLLERS 70%, CARRIER ROLLERS 82%, BUSHINGS 70% NOT TURNED, 8509 HRS ................................$98,000

2013 CAT 303.5ECR MINI HYD EXCAVATOR, ID# UT14330, CAB, AIR CONDITIONING, PATTERN CHANGER, SWING BOOM, AUX HYDRAULICS, MANUAL QUICK COUPLER, BUCKET, PLUMBED FOR HAMMER USE, 12IN RUBBER SHOES, ROLLERS 90% REM @ 730HRS, 734 HRS................................$43,000 W

LIS

2014 CAT 236D SKID STEER LOADER, ID# UT14784, 227 HRS, TIER IV ENGINE, CANOPY, 1-SPEED TRAVEL, LOW FLOW HYDRAULICS, MANUAL QUICK COUPLER, BUCKET, CAT TIRES 50% @ 226HRS............................$37,500

2013 CAT 259B COMPACT TRACK LOADER, ID# UT14482, CAB, A/C, ELEC CONTROL FOR IMPLEMENTS, 2-SPEED TRAVEL, LOW FLOW HYDRAULICS, MANUAL QUICK COUPLER, BUCKET, 16IN WIDE TRACKS, 801 HRS.............. ..................................................................$51,000

2010 CAT 963D TRACK-TYPE LOADER, ID# UT14224, WASTE HANDLING ARRANGEMENT, EROPS, AIR CONDITIONING, HYD SINGLE CONTROL THUMB ROLL, V LEVER CONTROL, MP BUCKET, SYSTEM ONE UC @ 10096 HRS, 18IN DG SHOES 35%, LINKS 46-58%..$115,000

2006 CAT 972H WHEEL LOADER, ID# UP14553, EROPS, AIR CONDITIONING, RETARDER, WHEEL STEERING, 2-VALVE RIDE CONTROL, LOADRITE WEIGHING SYSTEM, BUCKET, 26.5R25 TIRES @ 13690HRS, RF 57%, LF 48%, RR 32%, LR 23% ....................................$118,000

LIS

2013 CAT 966K WHEEL LOADER, ID# UP14096, 3093 HRS, TIER IV C9.3 ENGINE, EROPS, AIR CONDITIONING, RADIO, STICK STEERING, RETARDER, GP BUCKET, TIRES 68% REM ........ ................................................................$325,000

2012 CAT D8T TRACK-TYPE TRACTOR, ID# UT14398, EROPS, AIR CONDITIONING, DIFF STEERING, SINGLE TILT, SS RIPPER, STANDARD SALT UC @ 8566HRS, 24IN SHOES 65%, LINKS 76%, SEGMENTS 50%, IDLERS 84%, BUSHINGS 60% NOT TURNED, ROLLERS 91%, 8607 HRS......................................$370,000 W

LIS

2005 VOLVO A35D ARTICULATED TRUCK, ID# UT14755, 16699 HRS, CAB, AIR CONDITIONING, 6X6, RETARDER, BODY LINER, 26.5R25 TIRES @ 16699HRS:, RF 15%, LF 25%, RR 10%, RR2 15%, LR 25%, LR2 25% ........$80,000

LIS

TIN

2005 CAT 735 ARTICULATED WATER WAGON, ID# UP13431, TIER II 3406 ENGINE, CAB, AIR CONDITIONING, 6X6, TIRES @ 9307HRS: RF 59%, LF 34%, RR1 14%, RR2 28%, LR1 14%, LR2 28%, 7000GAL CURRY WATER TANK, 9307 HRS ........................................................$270,000

2014 CAT 908H WHEEL LOADER, ID# UT14929, 600 HRS, TIER IV C3.3B ENGINE, EROPS, AIR CONDITIONING, WHEEL STEERING, AUXILIARY HYDRAULICS, ELECTRICAL CONNECTION, GP BUCKET, FIRESTONE TIRES 90% REM @ 589HRS ......................................$93,000

2002 CAT 773E OFF HIGHWAY TRUCK, ID# UP12704, 20887 HRS, TIER II 3412 ENGINE, CAB, AIR CONDITIONING, PRODUCT MGMT SYSTEM, GROUND LEVEL SHUTDOWN SYSTEM, 24.00R35 TIRES @ 20887HRS:, RF 90%, LF 90%, RR 75%, RR2 75%, LR 50%, LR2 30% .. ................................................................$330,000

2013 CAT D5K XL TRACK-TYPE TRACTOR, ID# UP14116, EROPS, AIR CONDITIONING, 115" PAT BLADE, DRAWBAR, ACCUGRADE READY, 3 VALVE HYDRAULICS, UC @ 653HRS, 20IN SHOES 80%, BUSHINGS 94% NOT TURNED, LINKS 88%, IDLERS 95%, ROLLERS 86%, CARRIERS 90%, 823 HRS ..........$130,000 NE

LIS

TIN

2006 CAT 950H WHEEL LOADER, ID# UP15005, 11569 HRS, TIER III C7 ENGINE, EROPS, AIR CONDITIONING, RETARDER, 3-VALVE RIDE CONTROL, HYD HORIZ PIN QUICK COUPLER, GP BUCKET, 23.5R25 TIRES @ 11569HRS:, RF 37%, LF 70%, RR 35%, LR 39%............$130,000

2012 CAT D6T XL TRACK-TYPE TRACTOR, ID# UT14655, EROPS, AIR CONDITIONING, DIFF STEERING, SWEEPS, PAT BLADE, SINGLE TILT, DRAWBAR, SYSTEM ONE UC @ 2761HRS: 24IN SHOES 40% REM, LINKS 70%, BUSHINGS 80%, SEGMENTS 80%, 2898 HRS .. ................................................................$200,000

LIS

TIN

LIS

TIN

1990 CASE 590 BACKHOE LOADER, ID# UT14999, EROPS, TWO STICK HYD CONTROL, 4X4, GP FRONT BUCKET, REAR BUCKET, REAR AUX HYDRAULICS, STREET PADS, TIRES @ 4672HRS:, FRONTS 70% REM, REARS 61%,, STANLEY HS6000 PLATE COMPACTOR & MB875 HAMMER INCLUDED$16,000

LIS

TIN

2010 CAT 525C WHEEL LOG SKIDDER, ID# UT14802, 7855 HRS, TIER III C7 ENGINE, EROPS, AIR CONDITIONING, RETARDER, 14.4 SQFT BUNCH ROTATING GRAPPLE, DUAL FUNCTION ARCH, 7FT BLADE, FIRESTONE TIRES @7855HRS 99% REM................$136,000

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 27

USED PARTS

CATERPILLAR 980C, Arm, Used, #9V6026/3062 PETERBILT 13-210,224,265,281,300,310,320,330,335,340,341, 346,348,348A,348M,348N,348S,349,349A,351,351A,351ST,35 2A,352M,352S,353,357,358,358A,358M,358ST,359,359A,359 B,359M,359S,359ST,362,367,372,375,376,377,378,379,379EX HD,381,383,385,386,CB300, Engine Rebuilt, #6I3479/2562 CATERPILLAR 980H, Axle, Rebuilt, #2327558/34667 CATERPILLAR 980G,980G II, Axle, Rebuilt, #1725385/34669 CATERPILLAR 950G,962G,IT62G, Axle, Used, #1383121/35700 CATERPILLAR D6N LGP, Blade, Angle, Used, #2236304/38985 CATERPILLAR D5M,D5M LGP,D5N, Blade, Angle, New, #2096089/32261 CATERPILLAR 257,257B,257B2,257B3,257D, Blade, Angle, Used, #2315275/61395 CATERPILLAR D6T XW, Blade, Angle, Used, #3341764/58556 CATERPILLAR 314, Blade, Other, Used, #3387943/51608 CATERPILLAR D8R,D8T, Blade, Other, Used, #2627670/54790 CATERPILLAR D6K, Blade, Other, Used, #2401521/59967 CATERPILLAR 314D LCR, Blade, S, Used, #2824578/62303 CATERPILLAR D9N, Blade, SU, Used, #7T5384/47147 CATERPILLAR D9L, Blade, U, Rebuilt, #9J7420/42578 CATERPILLAR 988G,988H, Booms, Rebuilt, #2550042/51861 CATERPILLAR 311,312, Booms, Used, #5I3412/54544 CATERPILLAR 416C,416D,416E,420C,420D,420E,426C, Bucket, GP, New, #1345869/30959 CATERPILLAR 325C,304.5,304CR,305CR, Bucket, GP, New, #2277268/53007 CATERPILLAR 304CR,304.5,305CR, Bucket, GP, New, #3031340/53009 CATERPILLAR 320,321,322C,325C,330C, Bucket, GP, Used, #1325052/54432 CATERPILLAR 365B, Bucket, GP, Used, #1754487/49221 CATERPILLAR 420F, Bucket, GP, Used, #3377388/51594 CATERPILLAR 330C, Bucket, GP, Used, #3029013/32549 CATERPILLAR IT38, Bucket, GP, Used, #QH350GP/60448 CATERPILLAR 216,216B,216B2,216B3,226,226B,226B2, 226B3,228,232,232B,232B2,232B3,236,236B,236B2,236B3,23 6D,242,242B,242B2,242B3,242D,246,246B,246C,246D,247,24 7B,247B2,247B3,248,248B,252,252B,252B2,252B3,256,256C, 257,257B,257B2,257B3,257D,259D,259B,259B3,262,262B, Bucket, Other, New, #THSB/56740 CATERPILLAR 990,990 II,990F,990H, Bucket, Rock, Used, #2831880/61927 CATERPILLAR 992C,992D, Bucket, Rock, Used, #5V5601/60577 CATERPILLAR 992C,992D, Bucket, Rock, Used, #9U3013/59275 CATERPILLAR 988B,988F, Bucket, Rock, Used, #9V2019/60984 CATERPILLAR 988G, Cab, EROPS, New, #1289664/29291 CATERPILLAR D10, Cab, EROPS, Used, #3T8106/36149 CATERPILLAR 992C,992D,690B, Cab, EROPS, Used, #9V5306/30599 CATERPILLAR 836, Cab, EROPS, Used, #1293276/2846

THE BEST VALUE AND BEST SELECTION OF CAT® PARTS & COMPONENTS

CLEVELAND BROTHERS PROVIDES ALL YOUR USED PARTS AND EQUIPMENT NEEDS

CATERPILLAR 836G, Cab, EROPS, Used, #1793710/45412 CATERPILLAR 980G, Cab, EROPS, Used, #1097922/47687 CATERPILLAR, 992C,992D, Cab, EROPS, Used, #2V5075/46948 CATERPILLAR D9R,D10R,D11R, Cab, EROPS, Used, #1118549/50331 CATERPILLAR D350E, Cab, EROPS, Used, #7U4400/40232 CATERPILLAR D9N,D10N,D11N, Cab, EROPS, Used, #8E1085/48556 CATERPILLAR 314D LCR, Cab, Other, Used, #3467866/62302 CATERPILLAR 216,216B,216B2,216B3,226,226B,226B2, 226B3,228,232,232B,232B2,236,236B,236B2,236B3,236D,242 ,242B,242B2,242B3,242D,246,246B,246C,246D,248,248B,252, 252B,252B2,252B3,256C,262,262B,262C,262C2,262D,268B,2 72C,272D,272D XHP, Counterweight, Used, #3455147/60277 CATERPILLAR D10T, Counterweight, Used, #2235568/39840 CATERPILLAR 730, Cylinder, Hoist (Bed), Used, #2854032/61356 CATERPILLAR 730, Cylinder, Hoist (Bed), Rebuilt, #2854032/61357 CATERPILLAR 824C, Differential, Used, #4V1073/31078 CATERPILLAR 824C, Differential, Used, #3V4030/31079 CATERPILLAR 980K, Differential, Used, #3880375/58737 CATERPILLAR 992C,992D, Differential, Used, #6W7420/59790 CATERPILLAR 980K, Differential, New, #3880373/58489 CATERPILLAR D350E, Engine, Used, #1274527/39865 CATERPILLAR 962G, Engine, Rebuilt, #1168671/34551 CATERPILLAR 769D, Engine, Rebuilt, #1230206/32272 CATERPILLAR 826H, Engine, Used, #2258923/61095 CATERPILLAR 836C, Engine, Used, #1438336/62237 CATERPILLAR D10N, Engine, Rebuilt, #1056574/55963 CATERPILLAR D11R, Engine, Used, #1008111/62564 CATERPILLAR 773D, Engine, Rebuilt, #1314877/61865 CATERPILLAR 992C,992D, Engine, Rebuilt, #1301248/63895 CATERPILLAR D6H,D6H II, Engine, Rebuilt, #7C0501/65537 CATERPILLAR 345B, Engine, Used, #1382001/37356 CATERPILLAR D11N, Equalizer Bars, Rebuilt, #2072683 CATERPILLAR D11R, Equalizer Bars, Rebuilt, #2072684 CATERPILLAR D10R, Equalizer Bars, Rebuilt, #2223676 CATERPILLAR D7H, Equalizer Bars, Rebuilt, #1414690/28344 CATERPILLAR D6H, Equalizer Bars, Rebuilt, #3W5979/65532 CATERPILLAR D6R, Equalizer Bars, Rebuilt, #2012078/31951 CATERPILLAR D6R, Equalizer Bars, Core,2012078/38992 CATERPILLAR 980G,Final Drive, Rebuilt, #1605585/8037 CATERPILLAR D11R,D11T, Final Drive, Rebuilt, #3242343/46124 CATERPILLAR, 988F,988F I, Final Drive, Used, #4E2664/43974 CATERPILLAR 320, Final Drive, Rebuilt, #7Y1571/37840 CATERPILLAR 345B, Final Drive, Rebuilt, #1362847 CATERPILLAR 120M2, Hitch, Used, #3377511/51815 CATERPILLAR 311, Hydraulics, Rebuilt, #4I7603/54757 CATERPILLAR D8T,D8T LGP,D8T LGP WDA,D8T II,D8T WDA,D8T XL, Ripper, Used, #2156422/55537 CATERPILLAR D6T,D6T LGP,D6T LGP VP,D6T LGP WDA,D6T

XL,D6T XL DS,D6T XLVP,D6T XW,D6T XW LGP,D6T XWVP, Ripper, Used, #3871087/65643 CATERPILLAR 325C, Ripper, Used, #WBRT3/50825 CATERPILLAR 311, Swing Drive, Used, #7I7761/57080 CATERPILLAR 385,385B,385B ME,385BL,385BL LR,385BL ME,385BL UHD,385C,385C FS,385C LRE,385C ME,385CL,385CL LR,390DL, Swing Drive, Rebuilt, #1484626/57063 CATERPILLAR 824B,836,836C, Torque Converters, Rebuilt, #1431234/56095 CATERPILLAR 988H, Torque Converters, Rebuilt, #1285303/52676 CATERPILLAR 773B, Torque Converters, Used, #6T4674/42945 CATERPILLAR D6N LGP, Torque Converters, Rebuilt, #1880502/44386 CATERPILLAR 970F, Torque Converters, New, #1463329/43970 CATERPILLAR 836G, Torque Converters, Rebuilt, #1457109/52159 CATERPILLAR D10R, Torque Converters, Rebuilt, #1102769/35220 CATERPILLAR D11,D11N, Torque Converters, Rebuilt, #3T9677 CATERPILLAR D11R, Torque Converters, Used, #1210030/47691 CATERPILLAR D8,D8L,D9N, Torque Converters, Rebuilt, #9P4890 CATERPILLAR 988H, Torque Converters, Rebuilt, #1285303/52676 CATERPILLAR D10L,D10, Torque Converters, Rebuilt, #6P6412/31183 CATERPILLAR D11,D11N, Track Frame, Rebuilt, #6Y2686/54865 CATERPILLAR D11,D11N, Track Frame, Rebuilt, #6Y2687/54866 CATERPILLAR D11N, Track Frame, Used, #6Y2686 & 6Y2687 CATERPILLAR 311,Track Frame, Used, #1089178/57365 CATERPILLAR, 345,345A,345B,345B II,345BL II,345BL II VG,345BL II LR,345BL LC II,345BL LR,345BL ME,345BL ME II,345BL UHD,345CL,345CL ME,345CL UHD,345CL VG,345CL WVG,345DL,345DL ME,345DL VG,345L,349DL,349EL, Track, Steel, Used, #3012287/52976 CATERPILLAR 988B, Transmissions, Rebuilt, #9W0782/32318 CATERPILLAR 824C, Transmissions, Used, #3P6809/33473 CATERPILLAR D11N, Transmissions, Rebuilt, #7T8168/56623 CATERPILLAR 773D, Transmissions, Rebuilt, #9G9624/56648 CATERPILLAR 930G,938G, Transmissions, Used, #2348866/32134 CATERPILLAR 16, Transmissions, Used, #9M8300/42387 CATERPILLAR D8R, Transmissions, Used, #2192624/47692 CATERPILLAR 992C,992D, Transmissions, Rebuilt, #3P9241/59831 CATERPILLAR D6,D6T,D7, Winch, Used, #3710956/51604 CATERPILLAR D5H, Winch, Used, #08929/51595

WWW.CLEVELANDBROTHERS.COM USED PARTS - 1.855.545.0267 ext. 2

988H Spade Nose Bucket 2469201, Stk# 65083

988B/F Spade Nose Bucket 7Y3 9V0219, Stk# 60984

824C Transmission, Rebuilt 3P6809, Stk# 33473

988B Transmission, Rebuilt 9W0782, Stk# 32318

Page 28 â&#x20AC;˘ December 30, 2015 â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ CONSTRUCTION EQUIPMENT GUIDE

#M BODIBS E.BDIJ OFS Z DPN 6T FE

#"/$)"3%

#"/$)"3% 64& % & 26* 1.& /5

5 )& ' 06/%"5 * 0/ 0'

"/: (00% 803, 4* 5 & Visit www.weaco.com to view our complete inventory 4009 Conrad Weiser Parkway â&#x20AC;˘ Womelsdorf, PA 19567 Phone: (610) 589-5555 â&#x20AC;˘ Fax: (610) 589-5350 â&#x20AC;˘ Email: sales@weaco.com 4 To Choose From!

2 To Choose From!

Multi One Articulated Loaders In Stock NEW IHI Excavators Vibrotech Screens

ai80eb

1998 KOMATSU CD60R-1E, #14809, 4963 Hrs, Cab, Air, Two Speed, 360 Rotation, New U/C, 1 of 3 Available for Rent ................$79,500

215/679-5958 JD Equipment ah33dg

2012-2013 Cat 246Cs, 700-2000 Hrs, Cab, Heat, A/C, 72" Bucket ......................................................$27,500-$29,900

2002 Case 580SMs, 8100-9600 Hrs, Cab, Heat, A/C, 4x4, EHoe, Ride Control ..................................Starting @ $23,000

2008 CAT 320DL, #130-15031, 7303 Hrs, Cab, Air, Reach Boom, 9â&#x20AC;&#x2122;6â&#x20AC;? Stick, Aux Hyd, 32â&#x20AC;? TBG, Geith Hyd Thumb, Bkt ......$97,500

www.jdequip.com T

ab07kn 1998 Cat D8R, 18800 Hrs, Cab, Heat, A/C, Ripper Available ................$93,000

2011 John Deere 329D, 2311 Hrs, Cab, Heat, A/C, Radio, 2-Speed, Quicktach ................................................$32,500

2006 I-R SD116F TF, #165-05019, 2750 Hrs, Cummins, OROPS, 84â&#x20AC;? Padsfoot, Drum Drive, 23.1x26 Tires .... ........................$52,500

2004 Cat 963C, 11,177 Hrs, Cab, Heat, 1999 Cat D6R, 15,077 Hrs, Heat, A/C, A/C, Radio ................................$55,000 Good Undercarriage ..................$59,000

2005 Volvo L150E, 12,446 Hrs, Cab, 2012 Takeuchi TW65, 266 Hrs, Heat, A/C, Cushion Tires............$65,000 Coupler, 2 Speed, 3rd Valve, Radio, 80" Bkt, 1.3 Yd Bkt ........................$51,000

Farmington (Rochester), New York Fax: 585-924-7624 Email: jfinlon@americanequipmentllc.com ÎŁÎ&#x2018;Ď&#x201A;Î&#x2022; Î&#x2018; Î&#x203A;Î&#x2122;ÎŚÎ&#x2022;. â&#x2C6;&#x2020;Î&#x;Î?â&#x2C6;?Î¤ â&#x2C6;&#x2020;ÎĄÎ&#x2122;Ď&#x201A;Î&#x2022; Î&#x2014;Î&#x;Î&#x153;Î&#x2022; Î&#x2019;ÎĽÎ&#x2013;Î&#x2013;Î&#x2022;â&#x2C6;&#x2020;. Î&#x2019;ÎĽÎ&#x2013;Î&#x2013;Î&#x2022;â&#x2C6;&#x2020; â&#x2C6;&#x2020;ÎĄÎ&#x2122;Ď&#x201A;Î&#x2122;Î?Î&#x201C; Î&#x2122;ÎŁ â&#x2C6;&#x2020;ÎĄÎĽÎ?Î&#x161; â&#x2C6;&#x2020;ÎĄÎ&#x2122;Ď&#x201A;Î&#x2122;Î?Î&#x201C;.

585-466-4902 www.americanequipmentllc.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 29

716-655-1101

1101 Maple Road Elma, NY 14059

Toll Free: 800-652-1101 Fax: 716-655-0374

2015 KPI-JCI FT4250CC: (1) PIONEER FT4250 CLOSE CIRCUIT TRACK MOUNTED IMPACTOR ENGINE - CAT C13 440 HP, TIER IV, 1800 RPM, HOURS: 10, S/N: 414883 ...... ......................................................................................................$CALL

PUT US BACK ON YOUR BUCKET LIST.

2015 ASTEC GT205S: GT205S – THREE DECK SCREEN -ONE (1) 3520K TRIPLE DECK SCREEN: 5’ x 20’ TOP AND MIDDLE DECK, 18’ bOTTOM DECK, HOURS: 10, S/N: 154151 ........................................................................................$CALL

%$6&+0$11 6(59,&(6 DID.

2013 CUSTOM CONVEYOR & FABRICATION 30X50: 30" x 50' RADIAL STACKING CONVEyOR 30” x 50’ RADIAL STACKING CONVEyOR, INCLUDES OPTIONAL SELF TRAINING RETURN, HOURS: 125, S/N: CC335 ........ ..................................................................................................$19,700

Genuine KOBELCO excavators are back and #BTDINBOO 4FSWJDFT is the authorized KOBELCO dealer for contractors in our area.

1989 CAT D3C: CLEAN, OPEN ROPS, PAT bLADE, 4 CyLINDER, 2,700 HOURS ......$19,500

2013 JCI KODIAK 200/6203: K2006203CC K200+ JCI CONE CRUSHER AGGRESSIVE STROKE, MAxIMUM PRODUCTION CONE CRUSHER wITH TRAMP IRON RELIEF, S/N: P131706 ....................................................................$695,900

We represent this top line of excavators because they’re recognized worldwide for outstanding quality, strong manufacturing

2013 KPI-JCI 1500 VSI: (1) USED PIONEER 1500 EV(A) PORTAbLE VERTICAL SHAFT IMPACTOR INCLUDING THE FOLLOwING: MODEL 1500H V.S.I., HOURS: 500, S/N: 412978 ................................................................................$257,900

support and competitive pricing. If you’re looking for excavators proven to drive increased productivity and profitability, maybe it’s time to add KOBELCO to your bucket list.

2015 ASTEC GT165: 5 x 16 2 DECK, TRACK SCREEN PLANT, HOURS: 320+/-, APRON FEEDER, HOPPER ExTENSIONS ..........................................................................$CALL

Call #BTDINBOO 4FSWJDFT today.

TEREX TA30 GEN 7 OFF ROAD TRUCKS: 385 HP CUMMINS QSM11, zF FULLy AUTOMATIC TRANSMISSION wITH MANUAL OVERRIDE, DIFF LOCK, TRANSMISSION RETARDER, HEATED bODy, AIR RIDE SEAT, GOOD wORKING ORDER. THREE AVAILAbLE HOURS RANGING FROM 3700 TO 4600 ..$CALL

2001 VIBROMAX W1500: VIbROMAx 1500 TRENCH ROLLER 24" PAD FOOT DRUMS SKID STEER, wALK bEHIND OR REMOTE CONTROL, KUbOTA DIESEL ENGINE, HOURS: 140, S/N: JKC4200326 ......................$9,500 TEREX TSR60: APPROxIMATELy 180 HOURS, 60HP PERKINS TURbO DIESEL, 16GPM AUxILIARy HyDRAULICS, REVERSIbLE wHEELS, 67” bUCKET wITH bOLT ON EDGE ..................................................................................................$25,295 2014 KOBELCO 17SR-3: NEw KObELCO 17SR MINI ExCAVATOR. RUbbER TRACKS wITH ExPANDAbLE UNDERCARRIAGE, DOzER bLADE, OPEN ROPS, PLUMbED, DRIVE: TRACK ..................................................$CALL

www.KOBELCO-USA.com

Dealer Logo and Address 1101 Maple Road Elma, NY 14059

2008 VOLVO 150F: CRAIG HEAVy DUTy bUCKET, 26.5 RADIAL xHA MICHELIN TIRES, VERy GOOD COND. OVERALL, RUNS AND DRIVES wELL, APPROx. 8450 HRS......$112,000

KOMATSU PC75UU-1: STEEL TRACKS, OFF SET bOOM, DOzER bLADE, FIxED THUMb, 24” bUCKET wITH TEETH, RUNS AND OPERATES wELL, 2875 HRS, S/N 2587 .. ..................................................................................................$14,895 (3) TEREX TA30 GEN 7: EREx TA30 GEN 7 OFF ROAD TRUCKS, 385 HP CUMMINS QSM11, zF FULLy AUTOMATIC TRANSMISSION wITH MANUAL OVERRIDE, DRIVE: 6wD, HORSEPOwER: 385, CAPACITy: 30 TN, S/N: A9021054 ..................................................................................$CALL

GT205S 5 X 20 TRIPLE DECK TRACKED SCREENING PLANT: 2015 MODEL yEAR ......................................................$CALL

Page 30 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

What’s going on in YOUR COMPANY

We want to know! Give us a call.

Construction Equipment Guide

(800) 523-2200 or

FA X: We are a full service authorized Eager Beaver Dealer.

YOUR FULL SERVICE VIBROTECH SCREEN DEALER FOR NJ & DEL. 2008 John Deere 310J, Turbo, 4x4, ExtHoe, Powershift, 3rd Valve, Quick Coupler, Pilot Controls, 3,395 hrs, Stk# LP190 .............. ................$48,500

DELIVERY

2008 Case 821E Wheel Loader, 6 Cyl Turbo, EROPS, JRB Quick Coupler Stk# WL090.............. ................$88,500

Cat 312DL Excavator, Diesel, EROPS, 8’2” Stick, FB 30”, QC, Hyd Frnt, Stk# EX089...... ................$79,900

2004 Freightliner FL70, White MB Engine, Auto Trans, A/C, Auto Tarp System, Stk# DT115 ................$38,900

1988 IR SD100-D Roller, Cummins Dsl, OROPS, 84” Drum, Stk# DR015 .. ................$28,900

2012 Cat 262C Skid Steer, EROPS, AC, 4x4, Stk# SSL068 ............ ................$39,900

Various New Excavators, Grapples and Thumbs

FINANCING

MIKE ZYNDORF LLC 609-625-8660 609-442-5514 (EVENINGS) FAX 609-625-8664 6481 Harding Hwy (Rt 40) Mays Landing, NJ 08330 Please Visit us www.mzequipment.com for our complete inventory

(215) 885-2910

GZA to Receive ACEC Diamond Engineering Excellence Award Leading environmental and geotechnical consulting firm GZA was selected to receive a Diamond Award in the 2016 Engineering Excellence Awards Competition by ACEC (American Council of Engineering Companies) of New York for its entry entitled, “OneNYC Retail Waterfront Emerges from Solid Waste” showcasing Thor Equities’ Brooklyn Bay Center Project on Shore Parkway in Brooklyn, N.Y. ACEC of New York presents the Engineering Excellence Awards to projects that encompass both the public and private sector in a series of categories. ACEC of New York selected GZA for a Diamond Award in the category of special projects. The firm served as the remediation engineer of the project, designed the sub-slab depressurization system, and oversaw the environmental remediation. All Diamond Award projects designed and built in New York State are in contention for the Empire Award, which is an

award given to the highest rated project in New York State. Furthermore, as a Diamond Award winner, the project is designated as one of the finalists to represent ACEC of New York in the national competition sponsored by ACEC. Each year, judges evaluate project submittals from more than 60 member firms based on a rigorous set of criteria, including complexity, innovation and value to society. A panel of industry experts that includes military and government officials, ACEC National and International leadership, educators from colleges’ and universities’ engineering departments, and leadership from other organizations dedicated to the built environment judge the projects. ACEC of New York will honor award recipients at the 49th Annual Engineering Excellence Awards Gala on March 19, 2016, at the Waldorf Astoria in New York City. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 31

BAD CHOICES CAN BURY YOU

Not using Cat® filters can lead to some messy situations. This guy didn’ didn’tt use a Cat filter in his Cat machine and now he’s paying the price. What’s What’s worse? He could pay an even bigger price down the road because Cat filters protect like he’s other. Which is why you should always use them. And if you don’ no other. don’tt … you could get buried. Find out what makes Cat filters so important at ChooseCatFilters.com. TER and Buy ONE CAT CA ATT FILTER FILLTER a GET ONE FREE | Enter to win FREE Cat Filters & Fluids for a year* that’’ss what we’re built to deliver. delliverr.. deliver Helping Cat machines lead long and productive lives – that’s *VOID WHERE PROHIBITED. NO PURCHASE NECESSARY TO ENTER OR WIN. A PURCHASE WILL NOT INCREASE YOUR CHANCES OF WINNING. Please see complete official promotion rules at ChooseCatFilters.com. © 2015 Caterpillar Caterpillar.. All Rights Reserved. CAT, CAT, CATERPILLAR, CA ATERPILLAR, TE ERPILLAR, BUILT BUILLTT FOR IT IT, T,, their respective logos, “Caterpillar Y ellow,” the “Power Edge” trade dress as well as corporate and product identity Yellow,” used herein, are trademarks of Caterpillar and may not be used without permission.

Page 32 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

FIVE STAR EQUIPMENT, INC. CALL

800-457-1616

fax

2010 Deere 450J LT Dozer, Stk# 23185, 2115 Hrs, ROPS, 16” Pads, 97” Blade .. ..................................................$62,000

ASK ABOUT FINANCING ON USED EQUIPMENT EMAIL lasickitom@fivestarequipment.com

607-775-1238

1975 CAT 120G Motor Grader, Stk# 31245, 293 Hrs, ROPS, Tall Cab, 12’ Blade, Aux Hyd, Mid Scrfr........$32,000

2012 Hyundai HL757-9 Loader, Stk# 31146, 1223 Hrs, Cab w/ Air, Aux Hyd, QC, RC, 20.5 Tires, MP Bkt....$116,000

2014 Deere 624K Loader, Stk# 23128, 250 Hrs, Cab w/Air, RC, Std Rear Hitch, 3.5 Pin-on Bkt ........................$169,000

2014 Deere 624K Loader, Stk# 23132, 422 Hrs, Cab w/Air, RC, 20.5 Tires, 3.0 Yd Bkt ....................................$180,000

2012 Deere 410K Backhoe, Stk# 23197, 1241 Hrs, Cab w/Air, MFWD, 2 Lever Controls, RC ..................$96,000

2011 Cat 938H Loader, Stk# 31159, 1032 Hrs, Cab w/Air, Diff Lock, 20.5 Tires, GP Bkt ..........................$150,000

Pennsylvania Locations: Dunmore • Athens Waterford • Williamsport

New York Locations: 2009 Deere 950J Dozer, Stk# 13278, 1719 Hrs, 24” SRV Pads, PB, 145” Semi-U Blade, Ripper ............$290,000

Kirkwood • Syracuse Rochester • Orchard Park

2012 Deere 444K Loader, Stk# 14443, 936 Hrs, Cab w/ Air & Heat, 3 Spl, RC, 17.5 Tires................................$125,000

For Our COMPLETE INVENTORY of Used Equipment with Photos and Detailed Descriptions visit www.fivestarequipment.com

SEE EVEN MORE GREAT DEALS @

www.workreadytrucks.com

DAVE HALLMAN CHEVROLET 866-686-0545 Call Bob Dylewski

Arriving Daily The All New 2016 Silverado HD’s 2015 Express 3500 16' MORGaN BOx TRUCK w/ Waltco Rail Gate, 16' Morgan Dry Freight FRP Van Body, Waltco MDL 16 Rail Gate, cab access door, 177" wheelbase, locking rear differential, dual rear wheels, 12,300 GVWR, 6.0 gas V8, tilt, cruise, AM/FM/CD/USB, chrome appearance package, 6 speed automatic $41,298

2014 ISUZU NRR

New 2015 Chevrolet ExPRESS 3500

2015 Silverado Crew Cab 3500HD 4x4

5.2 Diesel chassis, Bare chassis, power windows, power locks, heated power mirrors, tilt, cruise, AC, CD player, exhaust brake, 4HK1TC, diesel engine, 215 HP at 2550 RPM, 452 ft-lb gross torque at 1850 RPM. 4 cylinder, 16 valve, four cycle, overhead cam, turbo charged, inter-cooled, water cooled EGR valve $45,998

11' READING LO-PRO READY VAN Steel Service Body, galvanized steel construction, Acrylic "E" coat primer protected, 48"W X 54"H dual rear doors, 57" inside height, front sliding access door, 2 interior dome lights, side access doors, drop down access doors at rear for storage of conduit 10' lengths $40,798

DURAMAX DIESEL Dual Rear Wheel-- 9' READING Aluminum Service Body C2-50 PKG 9' READING ALUMINUM SERVICE BODY, C2-50 PKG., Latchmatic, Compartment Lights, tow pkg., 3500HD dual rear wheel, crew cab, 6.6 LITER DURAMAX DIESEL, ALLISON 6 SPEED AUTO $56,998

New 2015 Chevrolet SILVERaDO 3500HD

New 2015 Isuzu NPR

New 2015 Isuzu NRR NU484

New 2016 Isuzu NPR xD

New 2015 Chevrolet ExPRESS 4500

New 2015 Chevrolet ExPRESS 3500

CREW CAB 9' Morgan Steel DUMP 4X4 Duramax Diesel, MORGAN 9' Dump, CREW CAB 4x4 electric over hydraulic hoist, 1/4 cab shield, steel splash guards, QUICK LATCH tailgate handle, tow pkg., splash guards, DURAMAX 6.6 LITER TURBO DIESEL, tow/haul mode, manual tapshift mode $53,998

HD EFI 11' Aluminum Drop Side Mason Dump Body 11' TruckCraft Aluminum DropSide Dump Body, Electric hoist, Tow Package, Brake Controller, 6.0 gas V8, 6 speed auto, 14,500 GVW, TARP KIT, limited slip differential, power windows, power locks $48,998

2015 ISUZU VULCAN ALUMINUM CAR CARRIER 2015 ISUZU 10 SERIES 21' ALUMINUM CAR CARRIER WITH WHEEL LIFT. 96" WIDE BODY WITH 8000# WINCH AND 50' CABLE.PHOENIX LED LIGHT BAR 49" ALUMINUM S/S TOOL BOX.215HP ISUZU W. ASIN TRANSMISSION. LIMITED SLIP REAR AXLE $76,998

5.2 Liter Diesel 16' Box Truck, 16' Supreme FRP Van body, sliding side door with step, dense pine flat floor, 2 grab handles, three person seating, power windows and locks, AM/FM/CD radio, 5.2 liter turbo diesel engine: Isuzu diesel engines can run up to 10,000 miles between oil changes $55,998

Cutaway 17' MORGAN VAN BODY -14,200 GVW, E-track, Access Door, Rollup Rear Door, 14,200 GVWR, Express 4500, 17' Morgan Van Body, roll-up rear door, access door to cab, 1 row of E-track each side, 6.0 Gas V8, 6 speed auto, crank windows, manual locks, tilt, cruise, AC, CD player $37,998

10' Aerocell CW 9900 GVWR Single Rear Wheel, Narrow Width Swing Out Rear Doors, Backup Camera, E-TRACK, 10' AEROCELL CW (City Wide), BACKUP-CAMERA, NARROW WIDTH SWING OUT REAR DOORS, E-track (one row each side), 6' FULL HEIGHT walk-through sliding bulkhead door, Single rear wheel $36,998

New 2015 Chevrolet SILVERaDO 3500HD

New 2015 Chevrolet ExPRESS 3500

New 2015 Chevrolet SILVERaDO 3500HD

2008 GMC W 5500

New 2015 Chevrolet SILVERaDO 3500HD

4x4 Gas 12' EBY ALUMINUM Dumping Stake Body, 12' EBY ALUMINUM dumping stake body, tow package, trailer hitch, 6.0 gas V8, 6 speed auto, locking rear diff, SNOW PLOW PREP - increased capacity front torsion bars, 220 amp alternator, TRUCK HAS THE OPTIONAL DUAL BATTERY SETUP FROM GM $48,498

SRW Cutaway 9900 GVW 11' Reading ALUMINUM Service Van 57" Inside Height, 11' Aluminum CLASSIC SERVICE VAN, 57" INSIDE HEIGHT, Latchmatic remote keyless locking system - two key fobs included to lock and unlock all body doors $42,798

5.2 liter Isuzu diesel cab over 14' Box Truck, 5500 HD W series cab over 14' box truck, 5.2 liter Isuzu turbo diesel, 19,500 GVWR, new PA inspection, new rear tires $26,888

AIR FLO 9' Dump (PAINTED WHEATLAND YELLOW TO MATCH CAB), electric over hydraulic hoist, 1/4 cab shield, steel splash guards, QUICK LATCH tailgate handle, tow pkg., splash guards, DURAMAX 6.6 LITER TURBO DIESEL, tow/haul mode, manual tapshift mode, diesel exhaust brake, block heater, 4x4 $51,998

9' AIR FLO Steel DUMP 4X4 Duramax Diesel, AIR FLO 9' Dump, electric over hydraulic hoist, 1/4 cab shield, steel splash guards, QUICK LATCH tailgate handle, tow pkg., backup alarm, splash guards, DURAMAX 6.6 LITER TURBO DIESEL, tow/haul mode, manual tap-shift mode, diesel exhaust brake, block heater, 4x4 $51,998

9' EBY ALUMINUM FLATBED, 18" X 18" X 30" ALUMINUM UNDERBODY TOOLBOX, #c3187 $44,748

New 2015 Isuzu NU484 2015 ISUZU NRR 176" WB, LIMITED SLIP REAR AXLEAISIN A465 6SP AUTOMATIC TRANSMISSION $51,999

New 2015 Chevrolet SILVERaDO 3500HD 9' Aluminum TruckCraft Dropside DUMP 4X4 Duramax Diesel, 9' ALUMINUM TruckCraft Dropside dump body, Aluminum underbody toolbox, Tarp Kit, Coal Door, electric over hydraulic hoist, cab shield, splash guards, QUICK LATCH tailgate handle, tow pkg., splash guards, (3) AUX. UPFITEER SWITCHES $57,248

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 33

O.K. Rentals Equipment Available For Rent or Sale 2012 Link-Belt 350X3 Hydraulic Excavator 2011 Doosan 340LC-HD Hydraulic Excavator

2250 Hrs, Piping and Quick Disconnect System..............$155,000

4000 Hrs, Piping and Grapple .......... ................................................$95,000

1998 Mack Tractor

1100 Hrs, Bucket and Piping for Attachments ..........................$96,000

2006 Doosan Mega 400 Wheel Loader

350 Mack Eng, 40,000 Lb Rears, 12,000 Lb Front Axle, 469,000 Miles ....$19,900

Solar Powered Security System for Rent or Sale

2012 Link-Belt 145 Hydraulic Excavator

Terex 842C Material Handler

10,000 Hrs ..............................$55,000

For Sale: Snorkelift For Sale $4,900 Scat-Trak 3000 Mini, Rubber Tracks, Diesel Engine $5,500

All Wheel Drive ......................$35,000

O.K. Rentals Equipment Available For Rent or Sale • Lifts, Scissors & Booms • Earthmoving Equipment • Forklifts • Concrete • Compaction Equipment • Lawn & Garden • Saws • Compressors

Also Available: Several Grapples • Concrete Pulverizer Genesis Shear w/Concrete Jaws

Authorized Dealers For:

O.K. Rentals Construction Equipment 640 Main Street • Darby, PA 19023

John McCusker 484-955-2861 jmccusker99@gmail.com

Ron Scoleri 610-583-3333

www.okrental1.com

Page 34 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Variety of Projects Keep Schlouch Crews Busy in Pa.

Schlouch teams finish up work at the Prologis L.P. big box warehouse.

Schlouch concrete team members are pouring foundation footers for the Nancy Run Fire Company expansion in Bethlehem Township, Northampton County. Schlouch also is providing the concrete slab. SCHLOUCH from page 14

Franklin Street, Valley Township, Chester County, Pa. Schlouch is providing clearing, grubbing, survey, stakeout, earthwork, sediment/erosion control, sanitary and storm sewers, water line installation, concrete, curbs and paving. Work will be completed in the fall 2015. Delaware County Haverford College has selected Schlouch Incorporated to install a track and turf at its campus at 370 Lancaster Avenue, Haverford Township, Delaware County, Pa. Schlouch is providing clearing, grubbing, survey, stakeout, demolition, sediment/erosion control, concrete, curbs, paving and seeding. Work will be completed in fall 2015. Lehigh County Lehigh Valley Health Network has named Schlouch Incorporated to install a 14-acre parking lot at its facility on Cedar Crest

Boulevard and I-78 in Allentown, Salisbury Township, Lehigh County, Pa. Schlouch is providing clearing, grubbing, survey, stakeout, earthwork, sediment/erosion control, storm sewer, concrete, curbs, paving, landscaping and seeding. Work will be completed in the fall 2015. K&M Associates Inc. named Schlouch Incorporated to prepare a 20-acre site for Parkland Fields Phase 4, a 58-building-lot project at Schantz and Krocks Roads, Upper Macungie Township, Lehigh County, Pa. Schlouch is providing clearing, grubbing, survey, stakeout, rock removal, earthwork, sediment/erosion control, sanitary and storm sewers, water line installation, roads, building pads, curbs, paving and seeding. Work will be completed in spring 2016. Montgomery County Envision Land Use has selected Schlouch Incorporated to prepare the site for the Estates at Macoby Run —Phase 4A, a 65 single-home residential community. Estates

Schlouch teams are finishing paving and grading an earth cover on a pond liner at Lehigh Valley Health Network’s 14-acre parking lot site on Cedar Crest Boulevard in Lehigh County.

at Macoby Run is located at Cedarbrook Lane and 11th Street, Upper Hanover Township, Montgomery County, Pa. Schlouch is providing clearing, grubbing, survey, stakeout, blasting, rock removal, earthwork, sediment/erosion control, sanitary and storm sewers, water line installation, roads, concrete, curbs and paving. Work will be completed in the fall 2015. The Whiting-Turner Contracting Company has selected Schlouch Incorporated to prepare the 5-acre site for iFly Indoor Skydiving on Goddard

Boulevard, King of Prussia, Upper Merion Township, Montgomery County, Pa. Schlouch is providing survey, stakeout, earthwork, sanitary and storm sewers, water line installation, sediment/erosion control, curbs and paving. Work will be completed in spring 2016. (This story was reprinted with permission from OnSite With Schlouch, Fall/Winter 2015 edition.) (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 35

MERLO - The Skid Steer of Heavy Equipment • Multiple attachments - One machine! • Jibs; aerial platforms, buckets, etc. • Hydrostatic drive for simplicity • Built-in sideshift for precision • Compact stabilizers for safety • Frame leveling for accuracy • Ring of steel for protection

ROTO Lift capacity up to 13,200 lbs Lift height up to 96 ft

PANORAMIC Lift heights 19 ft - 58 ft Max capacity 7,000 lbs - 8,800 lbs Class-leading telehandlers Ring of Steel Protection PANORAMIC HEAVY Lift capacity 9,900 lbs - 26,500 lbs Lift height 58 ft

Rental Units Available Rotates 360˚

PANORAMIC COMPACT Only 6.5 ft wide - ‘L’ version 6.5 ft high New UltraCompact 5.9 ft high Capacity up to 7,000 lbs 19 ft - 26.9 ft lift height

Merlo is a 48 year old global manufacturer of telescopic forklifts offering a wide range of telehandlers unsurpassed through their innovative design and quality. Merlo dominates the industry when comparing rotating telehandlers from the competition with superior design characteristics that improve durability and operation. All Hydrostatic full time 4WD ensures precise and consistent operation. Safety is paramount with instant braking, hydro-pneumatic suspension and legendary Merlo all-round visibility. GSE&E is the only Official Dealer authorized to sell Merlo Equipment in all / regions of the following states: NJ, NY, CT and PA and we offer the largest rental fleet of Merlo Roto Telehandlers in the USA. Call now and let us show you how Merlo is the best Telehandler available!

(800) 479-3857

Page 36 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BRANDYWINE TRUCKS AND EQUIPMENT WE BUY EQUIPMENT!

Many Lowboys in Stock! NEW/UNUSED

(301) 372-0083 Shipping & Containerization Available

WE BUY TRUCKS!

WWW.BRANDYWINE-EQP.COM

(2) Available 2001 Volvo A40D End Dumps, 19k-22k Hrs, Good Rubber, Tailgates, Engine Retarders............................$64,500 Ea.

New Witzco Lowboys, Customization Available, 35-50 Ton in Stock ........$Call

(2) Available

Low Hours

2012 Volvo EC250D LR, 4624 Hrs, 60’ Reach, 60” Bkt, A/C & Heat, Tier 4, Stock# 719H ..........................$165,000

(2) 2011 Cat 336DL, Both under 4,500 Hrs, Aux Hyd, Hyd Q/C, SBG Pads, Straight Travel, 12’10” & 10’8” Stick, Work Ready! ....................$195,000 Ea.

2011 Cat 304D CR, EROPS, Aux Hyd, Hyd Tilt Blade, Stk #409H........ $46,500

2013 Deere 450J LGP, 1027 Hrs, OROPS, Factory Warranty Avail., Like New!..........................................$83,500

2006 Cat 953C, 4764 Hours Verified by CAT, New Berco Complete U/C, EROPS, Don’t Miss This!..........$94,500 Low Hours

2013 Volvo ECR 235DL, Under 2000 Hrs, Aux Hyd, Mech. Thumb, Zero Tailswing, CLEAN! Stock# 123l ....$Call

2004 Cat 963C, EROPS w/AC, 8900 Hrs, Nice Machine! Stk #2121 ..........$79,500

2012 Cat 312EL, Mechanical Thumb, Tier 4, Stock# 749H..................$124,500

Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15

Made in the USA

2014 Low Hour Bomag BW213D-4, EROPS, 84” Drum, High/Low Frequency, 23.1x26 Rubber................$109,500 Ea.

2006 Cat 345C LME, 14,058 Hrs, 72” Bkt, Counterweight Removal Device, 152I ........................................$105,000

Deacon Equipment Co. CALL: 888-233-2266 Located In: Bloomsburg, PA

The SEAL SAVER WILL: Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries.

NEW MORBARK 40/36 WCL Track Chipper P.O.R.

Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

NEW MORBARK 3800XL Track Wood Hog P.O.R. Visit

www.sealsaver.com

for more information or contact us at 1-800-683-5189

Exclusive Morbark Dealer

Visit: www.deaconequipment.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 37

SAVE TIME SAVE MONEY SAVE LABOR SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA

2007 Komatsu PC300LC-7EO Hydraulic Excavator

2003 Caterpillar 330CL Hydraulic Excavator

Aux. Hyd, Q.C., 44” H.D. Bucket, DPF 4 Tier Compliant, Approx. 5000 Hrs ....................$117,500

Auxiliary Hydraulics, Quick Coupler. Approx. 7,500 Hrs ......................................................$87,500

2012 Caterpillar 321D LCR Hydraulic Excavator

1980 Bucyrus-Erie 88B HD Crawler Crane

9'6" Stick, Aux. Hydraulics, Coupler, A.C./Heat. 1,875 Hrs. ..................................................$172,500

Independent Boom Hoist, for Clam Use, Elevated Cab w/AC ....................................................$225,000

2006 Caterpillar 330DL Hydraulic Excavator

1998 Link-Belt RTC-8050 50 Ton Rough Terrain

Aux. Hydraulics, 10' 6" Stick, Q.C., A.C. 4,550 Hrs .. ..........................................Reduced Price $139,500

110’ Full Pwr Boom, 56’ S.A., 2 Hoists, 3,971 Hrs .... ..........................................Reduced Price $129,500

INTRODUCING FlangeLock Tool Boxes TM

4 Tool Boxes Available All Include Slugs and O'Rings.

TO VIEW OUR ENTIRE INVENTORY For more information contact Mike Pearl at 914.980.8890 or email mike@flangelock.com

www.flangelock.com

VISIT www.equipmentmartofny.com

203/335-0100

EQUIPMENT WANTED Fax: 203/335-7996

Answering Machine 24 Hours E-mail us at equipmart@aol.com

Page 38 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Link-Belt TCC series

The NEW Standar Standardd in Tele-Crawlers TeleTel ele-Crawlers

Introduced Fall 2015

Link-Belt TCC’s are proving themselves on job sites where others simply can’t go...

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 39

FINANCING AVAILABLE 286 Central Ave. South Kearny, New Jersey 07032

580 Creek Road Delanco, New Jersey 08075

800-255-5512

856-288-3700

Phone 973-589-4100 • Fax 973-589-4811

Fax 856-393-7699

E-mail: info@tes-inc.net • Website: www.tes-inc.net

SOUTH KEARNY, NJ

DELANCO, NJ

2000 Manitowoc 2250 300-ton, Series III ctwt option, 260' boom, Cummins diesel, S/N: 2251051 P.O.R.

2002 Manitowoc 999 275-ton, 200’ main boom, 60’ jib, Aux winch, Cummins diesel P.O.R.

2001 Link-Belt RTC 8040 SII 40-ton, S/N: F7J1-5291, 105’ main boom, 28’-51’ 2-piece jib, Hydro gas ride, Aux winch, Rear steer indicator P.O.R.

2007 Kalmar DCE 140-6 31,000 Lbs. @ 24” LC, Enclosed Cab w/Heater, CAT Diesel C6.6, Dana TE1300 Trans, 167” Triple Mast, SS/FP, 96” Forks P.O.R.

1980 Manitowoc 4100W SII 230-ton, S/N: 41649, 150' boom P.O.R.

1999 Link-Belt LS248 HII 200-ton, "C" ctwts, Ctwt removal system, 3rd drum, 200' main boom, 2 winch, S/N: H3I9-2238 P.O.R.

2001 Manitou MRT 1850 Rough Terrain Rotating Telescopic Handler, 10,000 lb. Capacity, 48” Long Forks, 58’ of Lift, Full Cab w/Heater & Wipers, 4WD P.O.R.

2005 Manitex 1770C 17- Ton, S/N 119511, 18,042 miles, Ford F750 210 HP CAT diesel, 23’ jib, 20’ wood deck P.O.R.

2007 Link-Belt 218 HSL 110-ton, 150’ main boom, “ABC” Ctwts, Block/Ball, diesel engine P.O.R.

2008 Link-Belt RTC 8090 90-ton, 140’ main boom, 35’ – 58’ jib, 2 winches P.O.R.

2009 Shuttlelift 3340B S/N: 321134, 10.5-ton, Diesel engine, Independent outriggers, 13’-32’ boom w/12’-28’ jib, Block & ball, New York City swing lock P.O.R.

2007 Demag AC200-1 S/N: 33167, 240-ton, Drive axle: 10x8x8, ZF automatic transmission, 6 cylinder diesel engine, 223’ main, 108’ jib P.O.R.

Authorized Dealer

Page 40 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

OPDYKE OPD Y KE IINC. NC N C. $79,500 $7 79,500

8688 8 688

TTrr u c k s 1 2 3 . C O M

SP SSPECIALIZED P EC E C I AL A L I ZED Z E D TRUCK & EEQUIPMENT QUIP QU PM MENT E N T SALES SALES 79,500 8726 87 726 $$79,500

$69,500 $ 69,500

8735 87 735

8711 711 1

$89,500 $ 89,500

8657 8 657 7

$79,500 $ 79,500

17 1 7 TTO TON ON

166,245 1 66 6 6,24 6, 24 45 miles miille m es 2003 KENNWORTH T300; 300HP; 2 2002 002 PR PROGRESS OGRESS AL ALUM UM FUEL TTANK; A ANK; 4 4500 500 GAL GAL;; 3 C COMPTS; OMPTS; BLA BLACKMER CKMER PUMP PUMP;; V/ V/R; /R; B/L; B /L; LL/C /C ME METER; TER; SCULL SCULLY LY SY SYS; S; REG REG/PRESET; /PRESET;

$19,500 $ 19 9,500

2 0 0 7 4300; GVW. GVW. 3 FORM BOT

FFREIGHTLINER; R E I G H T L I N E R; 410 HP; HP; 2002 ULLER 8 SP; SP; A/C; A/C; 83K 83 K G GVW. V W. FFULLER PM K KNUCKLEBOOM; NUCK CKLEBO OOM OM; PICKS PICKS 33,620 LB LB @ 5’7” SR; SR; PICKS PICKS P LB @ 51’10” MAX MAX SR; SR; REMOTE REMOTE CONTROLS; CONTROLS; 28,810 LB

64 4,900 8731 87 731 $$64,900

8684 8 684

149,018 14 49 9,,01 018 miles miille m es

217,824 21 2 7,,8 7 824 24 miles miille m es

1989 GMC 7000;5SP; 1968 BEARD PROP PA A N E TTA ANK; 2200 GAL CAP NEPTUNE METER; REG/PRESE T; 1 HOSE REEL; Stk 8731 $19,500

AL-350 -350 6 C CYL 2 0 0 3 M A C K R D 6 8 8 S ; AL YL (350 HP); 10 SP A/C; 66K GV GVW.7 W.7 T O N 2 0 0 2 H I A B 1 7 5 K N U C K L E B O O M ; 14,330 @ 7’7”; 2,510 @ 38’5”; LMI; R RADIO ADIO C CONTROLS; ONTR N OLS; 4 HYD HYD EXT EXT ON OUTER BOOM; 19’6” FLAT FLA AT WITH PIGGY BA BACK; CK;

129,071 1 29,071 9,071 ,071 071 71 miles ille es

FUEL F FU UEL T TR TRUCKS RUC UCKS UC CK KS IIN N ST STO STOCK! TO OCK CK K! $49,500 $4 49,500

UNMOUNTED U NMOUNTTEED K KN KNUCKLEBOOMS NU UC CK KLLEEB BO OO OMS MS

UNDER UN U ND DEER RC CDL DL

8467 84 467

8602 8 602 02

$34,900 $ 34,900 34 4,900

8652 8 652

21 TON 2 TTO ON

8637 8 637

4 x4

50,730 50 5 0,7 ,7 73 30 miles iiles les es

2005 FORD F750; C CAT AT C-7 6 CYL CYL (210 HP); 6 SP MANITEX MANI A I TE TEX X SP;; A/C; 33K GV GVW. W. M CRANE C CR RANE 1770; 17 77 70; 17 TTON; ON; N 120’ HOOK HT ATBED T HT;; 20’ WOOD FLA FLATBED. .

$84,500 $ 84 4,500

8SP; 60K GVW; 2007 Sterling LT 8 5 0 0 ; 300HP; MAINTAINER LUBE BODY; 6 PRODUC T TANKS;1-750 GAL FUEL TANK ; 1-275 HYD OIL; 1-220 WASTE OIL; 3-120 GAL (GEAR LUBE, OIL, WATER) 16 GAL GREESE CAN; HYD DRIVEN AIR COMP; ENCLOSED REAR HOSE REEL COMP;

$74,900 $7 74,900 74 74,900

110,744 1 10 0,744 ,74 744 44 m mi miles iles le es - I N T E R N A T I O N A L 2 2 5 H P ; 5 SP S AUTO; AUTO; A/C; 29K TTO TON ON CR O C CRANE RANE E L L I O T T PLAT L60-RMHA; 57’ TO OF WORK PLATFORM

80,189 80 8 0,18 89 miles illes es 1998 FORD LT8500; LTT8500; CUMMINS 8.3L 6 CYL CYL (275 HP); FULLER 9 SP (8+LO); (8+LO); 58K GVW. GVW. NATIONAL NAT NA ATIIO ATIONAL ONA O NA ALL CRANE CRA CR AN NE 80 8 800C; 00 0C C C; 21 TON; TON; 133’ 3 H HOOK HEIGHT; HEIGHT; 18’ WOOD FLATBED. FLA ATBED.

$39,500 $3 $ 39 9,,5 500 00

8707 707 07

825 82 8 25 hours ours urs rs 2 2011 DITCHWITCH TC H I TC FX30 FX3 VACUUM VA C EXCAVATOR; EEXCAV X C AVAT O OR R; KUBOTA KUBOTA 3 CYL CYL DIESEL ENG; TUTHILL BL BLOWER; OWER; BEL BELT LT DRIVE; W WATER ATER PUMP PUMP. P.

8761 87 761

$79,500 $ 79, 9,500 ,500

102,589 1 02 0 2,,5 58 89 m miles ille es

107,230 1 07 0 7,2 7, 23 30 m miles ille es

14 NEW 14N EW sstarting tart rtin ng aatt $ $16,900 16 6,9 90 00

2 2007 007 INTERNA INTERNATIONAL ATIONAL 4300; 4300; DT466 DT466 6 CYL (210 (210 HP); HP); FULLER FULLER 6 SP; SP; A/C; A/C; 25,500 CYL 2008 20 00 08 AUTO AU A UTO CRANE CRANE AC3-19/2 AC3-1 A C3 9//2 G V W. 2 GVW. KNUCKLEBOOM; K NUCKLEBO OOM OM; M 2 24’ 4’ WOOD FLA FLATBED. ATBED. $79,500

8669 8 669

2012 INTERNA INTERNATIONAL ATTIONAL WORKSTAR WORKSTTAR A EXT EXT CAB C AB 4 4X4; X4; M MAXFORCE AXFORCE 6 CYL CYL (220 HP); ALLISON 5 SP A UTO; A/C; 33K GVW. GVW. ALLISO ALLIS AUTO;

CAB 83’’ 83’ 3’ ’

C/A;

& 166’’ 166’ ’

20+ 2 0+ u used sed sstarting tart rting at at $ $4 $4,900 4,9 90 00 3123 3 12 12 23

B BE BETHLEHEM E THL TTHLLEHE

PIKE,

HATFIELD,

EXPORT ONLY!!! NLY!!! ISM; ISM; 440 HP; HP; 11 SP; SP; A/C; A/C; 86K 86K GVW GV W CHASSIS 189” FROM CAB EAR; 281” WHEEL BASE.

19440 0

USED TRUCK & EQUIPMENT SALES 1361 Conshohocken Rd., Plymouth Meeting, PA 19462

(610) 277-0100

SOLD 2012 Chev 2500, Crew Cab-Utility $22,900

2012 Ford F250, EX-CAB-Utility $29,500

2012 Freightliner, 54,667 Miles $54,900

2009 Case 580M 4x4-EXT, 2,300 Hrs $45,900

185’’’ 185’

$29,500 $ 29,500 50 00

2 2 7 P

W/B. W/B . 8738 87 738

744 74 44 m miles ille es

2014 INTERNATIONAL EER RNAT NA ATIONAL A TIO TI ONA O NA ALL 7 A 76 7600; 60 6 00 0; 0

CHASSIS; FR AM A ME; E;

538,180 53 5 38 8,1 18 80 miles ille es

2009 2009 09 K KENWORTH ENW WORT OR O RTTH T800: T800: 00: 0: Cat; Cat; 430HP; 430HP; 10sp; p p; Ton PALFINGER PK8501; 8501; 5.5 Ton PALFINGER A F 4630 @ 11’10”; 2200 @ 24’3” MAX MAX FLAT; Stk#8761 $79,500 SR; 20’ FLA AT; Stk#8761

$79,500 79,500 9,500 ,5 500

$39,500 $ 39,500

8730 730 30

95,764 95 9 5,,7 764 64 m mi miles ille es

237,642 237 2 37 7,,64 64 42 M MILES ILES LES ES

2002 MACK GRANITE; 4 0 0 H P ; 1 3 S P D ; 8 1 / 2 To n Palfinger; Radio Remotes; Stk #8730 $79,500

239-0451

8452 84 452

4 x4

000 INTERNATIONAL 4900; 10HP; 6SP AUTO; A/C. TON NATIONAL N80 KNUCKLEBOOMICKS 2050 @ 32’1”; 12’6” FLAT/UTIL

(8 6 6 )

326,421 32 3 26 6,421 6, 421 21 miles iles les es

K E N W O R T H; C (365 HP); HP); 10 1995 KENWORTH; CAT AT 3176 (365 SSP; P; A A/C; /C; 33 33K K G GVW. V W. VACMASTER VAC V VA AC M MA ASTTER VACUUM VAC V ACUUM EEXCAVATOR; XCAVA ATTOR JJOHN OHN D DEERE; EERE; TTUTHILL UTHILL B BLOWLOWEER; R; SSULLAR ULLAR A AIR IR C COMP; OMP; 450 G GAL AL SSPOLLS POLLS TTANK ANK W/ W/ HYD HYD DUMP; DUMP; 200 GAL GAL WATER WATER TANK; TANK ;

74,246 74 4,,24 24 46 m miles iles es 2004 FREIGHTLINER FL70 4X4; CAT CAT 33126 126 6 CYL (250 HP); ALLISON 5 SP; A/C; 33K GVW. GVW.

CAB 107’’

& C/A;

CHASSIS; 178’’ W/B.

S A L E S @O P DYK E S .COM

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 41

• NO TIME LIMIT POWER BOOST • INDUSTRY-LEADING SAFETY FEATURES • EXCLUSIVE INDEPENDENT TRAVEL • BEST-IN-CLASS FUEL ECONOMY

WE’VE GOT EXCLUSIVE FEATURES TO GET MORE DONE With KOBELCO excavators on l`] bgZ$ qgm dd Z] hj]hYj]\ for even the toughest ogjckal] [`Ydd]f_]k& L`Yl k Z][Ymk] o] j] [geeall]\ l g Zmad\af_ hjg\m[lanalq%Zggklaf_ features in our machines qgm ogf l Ú f\ Yfqo`]j] ]dk]& Oàd] gl`]j eY[àf]k eYq g^^]j hgo]j Zggkl$ gmjk ak mflae]\ Yf\ gh]jYlgj%[gfljgdd]\& L `]f l`]j] k l`] ]p[dmkan] af\]h]f\]fl ljYn]d ^]Ylmj] l`Yl d]lk qgm \a_$ da^l Yf\ ljYn]d Yl l`] kYe] lae]& O] ]n]f l`gm_`l g^ l`] dalld] làf_k$ dac] koaf_ Û Yk`]jk Yf\ af\mkljq%d]Y\af_ nakaZadalq l`Yl ]f`Yf[] kY^]lq& Hdmk oal` hj]ea]j gh]jYlgj [ge^gjlk$ q gm ea_`l Y[lmYddq ]fbgq gh]jYlaf_ gmj eY[àf]k&

MINI

SHORT RADIUS KOBELCO-USA.COM

CONVENTIONAL

Page 42 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Condolences…

Ed Malzahn, Ditch Witch Founder, Passes Away at 94 The Ditch Witch family announced the passing of the company’s founder and industry icon Ed Malzahn on Dec. 11. He was 94. Gus Edwin George Malzahn (Ed), of Perry, Okla., was the son of Charles and Bertha (Wolff) Malzahn. He was born on July 3, 1921, in Perry, Okla. Mr. Malzahn graduated from Perry High School in 1939 where he was an Eagle Scout, played football, played in the band and participated in several theatrical plays. He was known to pull out his cornet and play “Dear Old Perry High” if you asked. After high school he completed a degree in mechanical engineering at Oklahoma A&M College (Oklahoma State University) where he met the love of his life, Mary Corneil. Mr. Malzahn was very enterprising. As a young boy, he always had a project to engage his interests. He cast silver dollars for his friends at age 13, resulting in a visit from the FBI. He built a remote control spotlight at age 17 that caught the attention of the Air Force when he was caught “spotlighting” aircraft…again resulting in a visit from the FBI. He was always tinkering with something.

“Ed was the inspirational leader of the Ditch Witch and the Charles Machine Works family for over 65 years. He possessed a sharp mind, strong rural work ethic and generous spirit...” Rick Johnson Charles Machine Works CEO

Even in his later years he always had a project, with the latest being the conversion of a Perry landmark, the Masonic Lodge, into a multi-unit residence. But, no matter what project he was working on he always had time to roam the halls of Ditch Witch as “bull of the woods” to find treats for his sweet tooth, blow bubbles at a birthday party, or make a special delivery of roses from his garden. Mr. Malzahn changed the way the world’s

utility infrastructure is installed and maintained when he launched the first service line trencher, the Ditch Witch model DWP in 1949 from a small machine shop in Oklahoma. That small shop grew to become Ditch Witch, a Charles Machine Works company, which today employs more than 1,500 workers, and has more than 175 dealerships and branches serving 195 countries. The company has produced and sold more than half of the world’s trenching machines. “Ed was the inspirational leader of the Ditch Witch and the Charles Machine Works family for over 65 years,” said Rick Johnson, chief executive officer of Charles Machine Works. “He possessed a sharp mind, strong rural work ethic and generous spirit — all of which he used to better those around him.” Recognition of Mr. Malzahn’s accomplishments as an industry leader and innovator included his induction into the Oklahoma Inventors Hall of Fame, American Rental Association Hall of Fame, Construction Equipment Hall of Fame and North American Society for Trenchless Technology Hall of Fame. He also was named Inventor of the Year by the Oklahoma Bar Association: Patent, Trademark and Copyright Section. The needs of the community and its residents were always a priority to Mr. Malzahn, who held deep Oklahoma roots. His efforts as a civic leader and philanthropist included volunteer service and financial contributions to numerous organizations and boards at the local, state and national level. As a family man, Mr. Malzahn’s family life extended to his work life. Charles Machine Works has remained a family business since its creation, even after glob-

al success. Mr. Malzahn’s granddaughter Tiffany Sewell-Howard, who represents the fifth-generation of the Malzahn family, now serves as the executive chair of Charles Machine Works. Mr. Malzahn is survived by three children, Don Malzahn, and his wife, Phyllis; Pam Sewell, and her husband, David; and Meleasa Malzahn. He has nine grandchildren, Tiffany Sewell-Howard, and her husband, Dan; Jason Sewell, and his wife, Katie; Cody Sewell, and his wife, April; Zahn Wilkerson, and his wife, Kelly; Courtney Darrah, and her husband, Will; Sarah Malzahn; Matthew Wilkerson, and his wife, Briana; Whitney Wilkerson; and, Perry Malzahn, and her husband, Jason Brammer. He also has thirteen great-grandchildren. He was preceded in death by his parents, Charles and Bertha Malzahn, his wife, Mary, and one sister, Virginia Lamb. In lieu of flowers, donations may be made to the Perry Memorial Hospital Foundation, c/o Brown-Dugger Funeral Home at 1010 North 7th St. in Perry, Oklahoma. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 43

CUSTOM SIZES AND GVWs AVAILABLE

Gooseneck • 25,000 lb GVW available in 20' + 5', 25' + 5' and 30' + 5' • 25' + 5' model weighs approximately 6,000 lbs • 2,000 lbs lighter than steel trailers • More affordable than you might expect

Deck-Over 14,000 lb GVW available in 18', 20' and 24'6" lengths • 10,000 lb GVW available in 18' and 20' lengths • 10" frame rail on 14k trailer—lightweight and strong • 750 – 1,000 lbs lighter than comparable steel trailers • Wide choice of ramps and other options •

Low-Profile • 14,000 lb and 10,000 GVW available in 18' and 20' lengths, with 82" between fenders • Wide choice of ramps and other options • 20' 14k trailer weighs 2,510 lbs

HAUL MORE & SAVE MORE WITH

Eby aluminum equipment trailers are built on a solid reputation for superior materials and expert design. Eby equipment trailers combine the rugged durability your work requires with added-value advantages that come with aluminum—lower trailer weight, higher payload capacity and improved fuel economy. Rust-proof aluminum protects your equipment investment by lowering your maintenance costs and delivering unmatched resale value.

www.mheby.com • 800-292-4752 MAINE Wess Gorman Trailer Sales, Inc. Bridgton (207) 647-9411

VERMONT Lucky’s Trailer Sales, Inc. South Royalton (802) 763-2585

NEW YORK Paul Congelosi Tantivy Trailer Trailer Sales Sales Montgomery Vernon (845) 361-2246 (315) 829-4408

NEW JERSEY Hyers Auto Body Inc. Toms River (732) 341-6023

M. H. Eby, Inc. M.H. Eby, Inc. Blue Ball (800) 292-4752

PENNSYLVANIA Brechbill Trailer Sales LLC Chambersburg (717) 262-6383

Metzler Auto, Truck and Trailer Co. Martinsburg (814) 793-3726

VIRGINIA LB’s of VA Trailer Sales Lexington (540) 464-1006

Page 44 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Crews Have a Blast Excavating Land for Tuxedo Farms TUXEDO from page 8

stability. With the magnitude of this job, we anticipate being here for the next ten to twelve years. “Our reputation is for never laying off good employees and we have been able to maintain that policy except for the worst years of the recession. During that time, we went from 115 employees to 15. That period was devastating to our company, but we were able to survive.” One of the reasons the company survived is that over the years it had financed and/or lease purchased much of its equipment, according to Brennan. “As the recession slowly developed, we did not purchase any new equipment and we were able to pay our way out of the equipment that we already had. So, by the time the recession had deepened we had no debt. “For a while we chased public works projects, but because our competitors were also hurting, the number of contractors bidding on these projects increased dramatically and the amount of the bids decreased dramatically. We made the decision not to bid on projects that were not profitable just to keep our machines and people workThis massive block of granite (L) is blown to pieces (R), in preparation for the project.

The crew from Silver Valley Drilling & Blasting prepares for the next blast/shot.

ing. Without the cloud of debt hanging over our heads we made the decision to go into hibernation and we went from doing $25 million a year of business to $4 million. We tackled one project at a time and managed it well.” Brennan Construction is back growing and very healthy again and is moving ahead full speed, Brennan said. Many of its resources currently are on the Tuxedo Farms project, while a second crew is working on the Kearney Development in Carmel, N.Y., which is about an 80-unit project.

Severe rock is absolutely brutal on the excavator buckets.

Brand Loyalty Brennan Construction currently has 35 employees and about 40 machines in its fleet, which is made up of overwhelmingly Caterpillar equipment. “We’ve had Cat representative John Haverkamp servicing our account for 25 years. This year alone we have purchased a new Cat 349 excavator, two Cat 346F excavators with a hammer, a D6 dozer and a Cat 740 articulated dump truck. We are renting a new Cat 745C articulated dump truck. “We have stuck with Cat equipment for a number of

reasons. We feel that they are the strongest equipment dealer in the region with the greatest resources to support us. We have moved more and more towards renting equipment and we’ve learned that there is a big difference in the equipment that we rent from H.O. Penn and what we get from some other dealers. H.O. Penn’s rental fleet is made up of new or near new machines. They come off the truck, go immediately to work, and stay working. We’ve not had that experience see TUXEDO page 46

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 45

The “King” of

SEVERE DUTY

Every Attachment for Every Job & Every Budget

800-839-9981

Visit our website for more attachments!

We have an Extensive Used Inventory!

www.nationalattachments.com

YOUR NEW PARTNER IN SUSTAINABLE PRODUCTIVITY www.atlascopco.us

Stewart & Stevenson is proud to stock Atlas Copco tools as well as iT4 and T4F compressors and generators at its New Jersey location.

Lodi, NJ 33 Gregg St. (800) 823-2332

Rent or finance one today!

www.stewartandstevenson.com

Page 46 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Foley Announces Promotions of Tom Alfano, Scott Sarfert

Tom Alfano

Scott Sarfert

Jeff Merle, vice president of machinery sales at Foley Incorporated announced that Tom Alfano has been promoted to used equipment specialist and Scott Sarfert has been promoted to machine sales general line account manager. Alfano came to Foley more than 15 years ago, bringing with him an extensive sales background in the compact construction equipment (CCE) industry. Alfano started at Foley as a CCE salesman and was soon promoted to general line sales manager. He successfully managed the efforts of the general line sales force from the field, while still having sales coverage responsibility for selected accounts. Alfano successfully covered several territories as an equipment salesman and was also very instrumental in helping us establish and maintain our CCE business. Merle said, “Tom’s strong work ethic and knowledge of the business have proven to be very beneficial as an account manager, and it will serve him well as he works to

expand our used equipment sales outside of our geographic territory.” Sarfert began his career at Foley in 2010 as a parts coordinator in the corporate parts department where he gained valuable experience working with customers on machine cores, the online parts ordering system, and managing customer transaction issues. In 2014, Sarfert was promoted to inside sales representative in the marketing department, where he was responsible for selling equipment and services for the machinery sales, construction product support and Foley Rents divisions. “Scott has consistently been amongst the top performing inside sales representatives among North American Cat Dealers, and is ready to expand his reach to outside territory accounts,” said Merle. Sarfert will take over for Alfano covering Middlesex County in New Jersey and Staten Island, N.Y. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Excavation Work Under Way at Tuxedo Farms Development

This roadway is being built gradually after each blast of 10,000 yds. of solid granite. TUXEDO from page 44

elsewhere. “When we purchase machines from H.O. Penn we see value. I’ve put as many as 20,000 hours on Caterpillar machines and still gotten top dollar for them when they are sold. Caterpillar parts availability is unmatched and the brand holds value. Most dealers have no comprehension of what it costs to have a machine down. H.O. Penn gets it. “We know that H.O. Penn has been around for nearly 100 years. My dad dealt with H.O. Penn when he started the

A view of the mountain range that will be enjoyed by the future residents of Tuxedo Farms. On a clear day, the top of the Freedom Tower can be seen 35 mi. away.

company. He loved the Caterpillar track loaders. In fact, we were one of the last contractors in the area to use track loaders. “Another reason we continue to do business with H.O. Penn is our belief in relationships and loyalty. As I said earlier we’ve been doing business with H.O. Penn and John Haverkamp for 25 years. Both parties have been loyal to that relationship, so why would we end it? “We are also very appreciative of the services that H.O. Penn provides. My background is as an equipment operator

and a site supervisor. I am not an equipment technician and I have to rely very heavily on H.O. Penn’s technicians. They are very well trained and do great work. Cat Financial has provided us extraordinary financial resources and they know how to put together a package that meets our needs.” H.O. Penn is the authorized Caterpillar distributor for the lower 13 counties of New York State and the state of Connecticut. For more information, visit www.hopenn.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

ROLL IN READY TO DEMO!

EXCAVATORS 30,000 LB - 180,000 LB

FREE JOB SITE N ATIO CONSULT

• • • •

CUSTOM PACKAGES HIGH & HD-XTENDED REACH UNITS EQUIPMENT REMARKETING SERVICES TRANSPORTATION AVAILABLE

WHY RENT FROM US? Equipment Quality. Support. Availability.

ONE-LOAD MOVE 60ft 2-PIECE DEMO FRONT EXTENDED INWARD HORIZONTAL REACH 5700lb TOOL CAPACITY Rotating Shears • Demolition Grapples Processors with Multiple Jaw Sets Hydraulic Breakers, Concrete Pulverizers Scrap Magnets and more! AUTHORIZED DISTRIBUTOR

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 47

1-877-667-1998 Rent the right attachment for the job!

Sullair Compressor Delivery @ Model Rated Pressure

Pressure Range

185 375HAF 750HAF 900HAF 1150H 1300HAF 1600HAF TSR-20

185 cfm 375 cfm 750 cfm 900 cfm 1,150 cfm 1,300 cfm 1,600 cfm 970 cfm

80-125 80-150 80-150 80-150 175-350 80-150 80-150

Sullair Oil-free Compressors

Delivery @ Rated Pressure

DR-13, 150 Hp

785 cfm @ 125 PSIG

Sullair Electric Compressors

Delivery @ Rated Pressure

E900H

900 cfm @ 150 PSIG

Generator Model

Standby Rating

Prime Rating

Voltage

XQ20 XQ30 XQ60 XQ100 XQ200 XQ230 XQ300 XQ400 XQ500 XQ600 XQ800 XQ1000 XQ2000

20 ekW (25 kVA) 30 ekW (37.5 kVA) 60 ekW (75 kVA) 100 ekW (125 kVA) 200 ekW (250 kVA) 230 ekW (275 kVA) 300 ekW (310 kVA) 400 ekW (400 kVA) 500 ekW (625 kVA) 600 ekW (750 kVA) 795 ekW (994 kVA) 1000 ekW (1250 kVA) 2000 ekW (3007 kVA)

18 ekW (22.5 kVA) 27 ekW (33.8 kVA) 54 ekW (67.5 kVA) 90 ekW (112.5 kVA) 182 ekW (227.5 kVA) 210 ekW (262.5 kVA) 275 ekW (343.7 kVA) 365 ekW (365 kVA) 455 ekW (568 kVA) 545 ekW (681 kVA) 725 ekW (906 kVA) 910 ekW (1137 kVA) 1825 ekW (2631 kVA)

208 to 480 Volts 208 to 480 Volts 208 to 480 Volts 208 to 480 Volts 208 to 480 Volts 208 to 600 VAC 208 to 600 VAC 208 to 600 VAC 208 to 600 VAC 208 to 480 VAC 208 to 600 VAC 208 to 480 VAC 480 Volts

Light Tower 12 HP Diesel

Tier IV (F)

6kW Generator 120/240V

32 ft. - Max. Tower Height

Rent What You Need · Buy What You Want

New Your Attachment Rental Specialist Millennium

Rental s, Inc. www.newmillenniumrentals.com

Serving MA, ME, NH, RI, VT and Upstate NY. Call 1-800-821-6412.

Peter E. Menner, President

DEMOLITION • RECONSTRUCTION • ENVIRONMENTAL • RECYCLING

www.miltoncat.com

Page 48 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Westchester Tractor, Inc. 60 International Blvd • Brewster, NY 10509 RS NEW CHIPPE RS & GENERATO K NOW IN STOC

1997 New Holland 675E

TLB’S:

EXCAVATORS:

Allis Chalmers, Cab ................................................................................................................$6,500

2005 Kobelco 80CS, New Engine, New Rubber Tracks, 30” Bucket......................................$59,995

1980 Ford 445, Open Cab, 4645 Hrs ......................................................................................$8,400

2004 Kobelco SK115SR, Full Cab, Blade, pattern changer, Plumbed, 7485 Hrs ........SOLD $49,995

1987 Ford 555B, Cab 4WD, 3611 Hrs ..................................................................................$14,500

2007 Kobelco SK215, Full Cab, pattern changer, new Geith thumb, 36” bucket, 1490 Hrs $142,500

1986 Ford 655A, 4 Stick with 2 Stick Conversion Kit, Cab ........................................SOLD $14,995

CHIPPERS/STUMP GRINDERS

1984 Ford 1710 w/Bradco Loader and Backhoe, Deere 50” Rear Roto Tiller, 5’ Rear Finish Mower,

2008 Alitec DC1217, 12” Capacity, Winch, Auto Feed, 1487 Hrs, CAT Turbo Engine ..........$19,995

7’ Landpride Rake, 1800 Hrs ................................................................................................$12,500

2012 Bandit 150XP, 97 HP CAT engine, winch, auto feed, 365 Hrs ......................................$29,995

1973 John Deere 410B, Open Cab, Hydraulic Hammer ........................................................$13,500

1997 Bandit 90XP, 37 HP Gas Engine, 4 Cylinder, 645 Hrs, 9” Disc Chipper..........................$7,995

1997 New Holland 675E, Cab w/Heat, Tilt Bucket, 4 Stick, 1950 Hrs ..................................$28,995

2007 Bandit 250XP Chipper, Winch, 125hp Deere Engine....................................................$19,995

COMPACT TRACK LOADERS:

2003 Bandit 254XP, 14” Capacity, Deere 115 HP Engine, 1147 Hrs, Hand Crank Swivel, Auto Feed,

2013 New Holland C238, Full cab, pilot controls, T4 engine 250 Hrs ..................................$56,000

Lift Cylinder............................................................................................................................$19,995

1998 Morbark Hurricane 2400

discharge chute, 3550 Hrs ....................................................................................................$21,995

..............................................................................................................................................$90,995

TRACTOR LOADER:

SKID STEERS:

2004 Kubota B7800 HSD w/Loader, Industrial Tires, 248 Hrs, Garage Kept ..............SOLD $12,995

2005 Volvo EC140B LC

2002 Bobcat S185, Open Cab, Manual Coupler, Non Pneumatic Tires, 4730 Hrs ................$12,995

TRAILERS:

2005 Bobcat T190, Hi Flow, Mechanical Controls, Full Cab, 2989 Hrs ......................SOLD $22,995

1998 Eager Beaver 10HA, 10 Ton Trailer, Air Brakes ..............................................................$6,000

2005 New Holland LS170, Open Cab, 914 Hrs, 66” Low Profile Bucket, Front Aux. Hyd.....$15,000

MISCELLANEOUS:

SCREENERS:

2000 Eager Beaver 20XPT Trailer, 20 Ton, 8’6” Width, 19’ Deck, 8’6” Beaver Tail ................$7,995

2014 Vibrotech SCM115T Trommel, ½” screens, 64 Hrs ..................................................$129,995

2011 Kubota SQ33 USASW Generator, 33.1 KVA, 26.5W, 240V, 3 Phase, 4 Pole ......SOLD $6,000

See dealer for financing details. CNH Capital America LLC standard terms and conditions apply. Subject to customer credit qualifications. CNH Capital America LLC reserves the right to cancel any program without notice.

VISIT OUR WEB SITE

AT WWW.WTRACTOR.COM

WITHOUT HOUT A CDL C OR HAZMAT HHAZMAT NEW! MULTI-TANK TRAILER / 10-GAUGE STEEL / THREE-YEAR TANK WARRANTY / UP TO EIGHT SEPARATE TANKS

bit.ly/noHAZMAT

877.879.1490 | ThunderCreek.com |

SOLD 2014 New Holland L223

LEGALLY LEG GALL AL Y TRANSPORT DIESEL

All-In-One Jobsite Service Solutions

SOLD

1998 Morbark Hurricane 2400, 18” drum, winch, 110HP Perkins engine, hand crank swivel

2012 Bomag BW211D-40 Roller, Vibratory 84” smooth drum roller, cab with heat/AC, 2 Hrs..........

2007 Bandit 250XP Chipper

Now Serv ing All of Connectic ut

LATE MODEL EQUIPMENT

ROLLERS: 2012 Bomag BW211D-40 Roller

845/278-7766 Fax: 845/278-4431 E-mail: equip@wtractor.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 49

Page 50 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Durante Expands Territory, Acquires Quality Rent All Durante Rentals, a leader in construction equipment rentals in the New York area with locations in Queens, the Bronx, Mt. Vernon and Elmsford, announced its new location with the acquisition of Quality Rent All Inc. Its fifth location, and third outside of the five boroughs of New York, is located in the town of Kent at 333 Route 52, Carmel, N.Y. Quality Rent All was established in 1989 by founders Tim and Marilyn Plummer. “The Plummers built a really nice business over the years and we are pleased that Durante Rental’s newest location is in the town of Kent at 333 Route 52, Carmel, N.Y. they will be our first acquisiDurante Rentals will expand the current wheeled loaders for sale. tion. We are eager to welcome Quality Rent “This acquisition is critical to our rapid All customers and their staff to the Durante product line with the addition of new equipteam,” said John Durante, president of ment categories like boom lifts, loaders, growth strategy in the New York area. It Durante Rentals. “We are extremely excited excavators, light towers and generators. allows us to better serve our valued custo work with their nephew, Lou Alagno, who There will be a large Takeuchi earth-moving tomers located north of our current Elmsford has been promoted to manage the new store. machine presence as Durante Rentals, under location,” said CEO Anthony Durante. “It is Lou has 16 years of experience working for the New York Takeuchi brand, is the area’s perfectly aligned with our long-term goal of his aunt and uncle and has literally ‘grown authorized Takeuchi dealer offering new and developing emerging markets to expand our used excavators, skid steers, track and overall presence.” up’ in the business.”

“Durante Rentals has been extremely successful opening up cold starts in the N.Y. Metro area. While there are sure to be challenges ahead, I know our talented staff will do a great job of integrating an existing company into our culture and our way of doing business,” said Chris Jones, CFO and cofounder of Durante Rentals. “This successful integration will serve as the template for other potential acquisitions in the area.” With every new location it opens, Durante makes a commitment to the community it does business in with strong ties to local charities, municipalities and other local businesses, according to the company. For more information, visit www.DuranteRentals.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

RIDOT Removes Weight Limit for Great Island Bridge The Rhode Island Department of Transportation (RIDOT) announced that it has partially opened the new Great Island Bridge in Narragansett, removing a weight limit that prohibited large trucks from crossing the span for the past 20 years. The bridge is the only point of access to Great Island, located in the fishing village of Galilee. Phased construction will continue on the 180-ft.-long (54.86 m) structure with a single-lane alternating traffic pattern controlled by a temporary traffic signal. The project is on budget and approximately 200 days ahead of schedule. Substantial completion is expected in spring 2017. “While Great Island is largely a residential community, the weight limit was a hardship, affecting everything from oil trucks to delivery trucks,” said Peter Alviti Jr., RIDOT director. “We have about 80 weightlimited bridges in Rhode Island. With proper investment in our infrastructure, we can bring all bridges into a state of good repair and get rid of these restrictions that are bad for residents and bad for business.” RIDOT is building a new bridge through an $8.5 million project with MIG Corporation. Originally constructed in 1959, the Great Island Bridge was consid-

Great Island Bridge, Narragansett, R.I.

ered structurally deficient, posted at 12 tons (10.89 t) for 2-axle vehicles, 18 tons (16.33 t) for 3-axle vehicles and 28 tons (25.4 t) for 5-axle vehicles. The new bridge will feature 6-ft. (1.83 m)

sidewalks on both sides of the bridge, decorative lighting and an improved channel width that’s three times wider than the original bridge. For more information, visit

www.dot.ri.gov. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 51

Hydrema ydrema 912HM. O Off ff Road Road s superior. uperior. Talk T alk tto oY Your our loc local al de dealer aler or visit h hydrema.us ydrema.us

Pine Bush Bush E Equipment quipment C Co. o. Inc. Location: Location: NY Tel: (84 5) 7 744 44 2 Tel: (845) 2006 006 www.pbeinc.com www.pbeinc.com

E ast PBE East L ocation: C T Location: CT 470 Tel: (860) 665 665 7 Tel: 7470 www.pbeind.com www.pbeind.com

Jesco Inc. Jesco NJ, MD Location: NJ, Location: MD,, DE T el: (908) 7 53 8080 Tel: 753 www .jesco.us www.jesco.us

ompany Ander son E quipment C Anderson Equipment Company A, NY Y,, NH, ME L ocation: W estern P Location: Western PA, NY, T el: (4 12) 343 2 300 Tel: (412) 2300 www .andersonequip.com www.andersonequip.com

est Line E B quipment Best Equipment ocation: E astern P A L Location: Eastern PA el: (800) 6 79 2 378 T Tel: 679 2378 www .bestline.com www.bestline.com

Page 52 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Four locations serve Maryland, Delaware, Washington, D.C. and parts of Virginia, New Jersey, and Pennsylvania Elliott & Frantz can show you the latest Gradall models, including Series IV excavators with highway speed travel capability. Featuring AutoDrive™, these models integrate a 6-speed automatic transmission and a new transfer case for efficient, simplified travel as well as convenient jobsite repositioning from the upper cab. Gradall excavators also feature the job-proven telescoping, tilting boom that enables you to do more different jobs with just one machine – even under bridges and trees.

WWW.ELLIOTTFRANTZ.COM

Delmar, DE 302-846-3033 Jessup, MD 410-792-9134 King of Prussia, PA 610-279-5200 Manassas, VA 703-257-2381

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 53

ShorQuip Supp Supply, ly, Inc.

TTrench rench Shielding & Shoring

Call Us For All Y Your our TTrench ren Shoring Needs | We rench We Carr Carryy 1” Steel Road Plate

Manufactured by

Efficiency iency Pr Production, roduction, oduction, Inc. Inc

Manhole Box

1302 Conshohocken Rd PA 19428 Conshohocken, PA

Slide Rail

Slide Rail System

Aluminum Build-A-Box

Manufactured by

Safe-T-Shore Safe-T T-Shorre

Aluminum Hydraulic Shoring

610 610.239.6234 . 239 .6234 www.shorquipsupply www.shorquipsupplyinc.com inc.com

Trench Box Steel Trench

fax: 610.239.6237 sales@shorquipsupplyinc.com

Page 54 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Paving

SECTION

Pages 55-71

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

Caterpillar Adds High-Production B-Series Tandem Rollers oscillation that ensures mat contact and a smoother ride over uneven surfaces. An offset hitch option extends coverage up to 6 in. (17 cm) and simplifies control next to obstacles. It delivers excellent performance on longitudinal joints by pinching the edge with the lead drum and sealing the joint with the trailing drum. The CB64B is equipped with 79 in. (200 cm) drums, while the CB66B and CB68B utilize 84 in. (213 cm) drums. The Cat C4.4 engine rated at 142 hp (106 kW) comes standard with eco-mode and automatic speed control, leading to uniform compaction, fuel savings, reduced sound levels, and ultimately lower operating costs.

Caterpillar Inc. added high-production BSeries Tandem vibratory rollers that include the CB64B, CB66B, and CB68B models. These machines are 13 to 15.4 ton (12 to 14 t) compactors that feature wider drum widths, high-flow water spray system, increased operator comfort, and enhanced technology to help operators and machines perform at higher levels. Many of the technological enhancements are offered through Cat compaction control. They include autoadjustable compaction (AAC), pass-count and temperature mapping, machine to machine communication, and compaction meter value (CMV). Auto-Adjustable Compaction (AAC) Simple operation and optimized compaction help contractor’s lower costs. Autoadjustable compaction optimizes compaction by delivering the highest amplitude possible without de-coupling or over-compacting. The technology includes both the front drum and rear drum — a Cat exclusive. This system is able to adjust through the full range of amplitudes in as little as four seconds for excellent performance and uniform compaction throughout the mat. Pass-Count and Temperature Mapping Pass-count and temperature mapping systems provide real-time visual references of the passes made and asphalt mat temperatures present. Distractions, fatigue, multitasking and nighttime operation can affect how well an operator executes the rolling pattern on an asphalt mat. Where did I stop on the previous pass? Did I go back far enough on the return pass? Did I provide enough overlap on the previous pass? Is the mat temperature too hot, too cold? These are just a few questions that operators may have throughout the day. By utilizing Cat compaction control technology, second-guessing can be eliminated. Machine to Machine Communication This system helps keep rolling patterns in sync by sharing coverage and pass-count

The CB64B, CB66B, and CB68B models are 13 to 15.4 ton (12 to 14 t) compactors that feature wider drum widths, high-flow water spray system, increased operator comfort, and enhanced technology to help operators and machines perform at higher levels.

maps between the operating displays of multiple machines. By viewing the color display, operators can monitor areas of coverage and the number of passes made. If a trailing operator sees an area of missed coverage, they can easily pick it up to ensure the entire rolling pattern gets the attention that is needed. This system is extremely helpful when performing echelon compaction when multiple machines are executing five or seven pass rolling pattern. Compaction Meter Value (CMV) CMV technology uses a drum-mounted accelerometer to measure and record forces of the vibrating drums. A calculation derived from the recorded forces is used to create a unit-less value that provides an indication of stiffness. This unit-less value calculation is referred to as a “composite stiffness value” that indicates stiffness of the current and supporting layers beneath the drum. The system is capable of utilizing RTK level accuracy to provide the highest level of global navigation satellite system positioning (GNSS) and

is able to correlate compaction, frequency, and pass-count data to specific location. Efficient Power and Eco-Mode The Cat C4.4 ACERT engine meets U.S. EPA Tier IV Final and EU Stage IV emissions and provides 142 hp (106 kW) of power. Automatic eco-mode operates at a variable engine speed to deliver excellent fuel economy and lower sound levels. Keeping Operators Productive Visibility and comfort are enhanced by the standard 180 degree seating and optional 360 degree positioning. New handwheel steering technology eliminates the front steering console, enabling the operator to easily monitor water spray performance. An LCD display and push-button controls simplify operation for an all-around comfortable operating environment. Smooth, Maneuverable These models feature a newly designed center-articulating hitch with 6 degrees of

Versatile Vibratory Systems The B-Series tandem rollers offer a variety of vibratory options including dual amplitude, dual frequency, versa vibe, and five amplitude systems. The versa vibe system creates a 2-in-1 machine with four amplitudes and two frequencies. This versatile system provides two settings for lighter hitting and higher working speeds on thin lifts; and two settings for heavier hitting, and slower speeds, on thick lifts or those with challenging mixes. The five-amplitude system offers the widest range of amplitudes with a single frequency. Durable Water Spray System Reliable water spray systems are needed to keep rollers on the mat and on pace with the paver. The high-capacity system on these models are designed with dual spray bars, dual pumps, triple filtration, adjustable intermittent operation and an optional freeze protection kit. The dual pumps provide back-up capability and alternate with the direction of travel to maximize service life. Clogging is prevented through filters at the fill point, water pumps and spray nozzles. The adjustable intermittent mode conserves water and minimizes re-fills for optimal efficiency. The optional freeze protection kit helps ensure the roller is ready when you need it. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 56 • December 30, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

866-430-7539

www.jfwequipment.com sales@jfwequipment.com

Serving the Asphalt Industry for 25 Years

2005 Broce CR350 broom, a/c, 8 ft broom, Cat diesel engine, water system

New Marathon TPS250T tack distributor, Honda 5.5hp gas engine, 10GPM pump, 250 gallons, 5 ft spray wand w/40 ft hose, 10" filler lid, hose reel, 2 propane burners, 1995 Rosco SPRH-H chip spreader, 12 ft spread flushing system, molasses valve, electric brakes, pintle hopper w/platform, hydrostatic drive, Cummins 5.9L diesel engine hitch

New Warren aggregate tailgate spreader, 8 ft spreading, 2 sizes fit most all dump trucks, gravity flow, operator’s platform, goes in place of your tailgate

2006 Blaw Knox PF 3200 paver, Omni IIIA 10-18 ½ ft screed w/diesel heat, power crown and slope, fume extractor, Cummins 5.9L diesel engine

PLEASE CONTACT YOUR BAGELA ASPHALT RECYCLER DEALER:

www.ehrbar.com

Yonkers, NY

www.centralequipmentco.com

4 Executive Plaza, Yonkers, NY 10701 914-738-5100

Stillwater, ME 45 Dempsey-Greaves Lane, Stillwater, ME 04489 800-479-6193 Fax: 207-827-3774

Holbrook, NY 601 Coates Ave., Holbrook, NY 11741 631-563-7600

Gorham, ME 54 Olde Canal Way, Gorham, ME 04038 800-479-6193

Danbury, CT 2010 Volvo DD24 double drum 47” vibratory roller, Cummins 32 hp water cooled diesel engine, double drum drive, water system

New Marathon KERA10 oil jacketed walk behind crack sealer, 10 gallons, manual full sweep agitation, propane burner, heated 1" discharge valve

42 Kenosia Ave., Danbury, CT 06810 203-743-0088

Construction, Crane & Tractor www.constructioncraneandtractor.com

Folcroft, PA 1545 Hook Rd., Folcroft, PA 19032 610-586-2710

Piscataway, NJ 300A S. Randolphville Rd., Piscataway, NJ 08855 732-752-2828 2005 & 2009 Cat AS-2301 screed, 10-18 ½ ft, diesel heat, power crown & slope

2001 Cat AP800C paver, Extend-A-Mat 8-16B screed w/diesel heat, Cat 3054 diesel engine, power crown, slope & height, front wheel assist

3517 Wayne White Rd., Climax, NC 27233

US Distributor www.pavementrecyclers.com

70 Platt Road Shelton, CT 06484 203-944-0525

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 30, 2015 • Page 57

Contact your local dealer: CHADWICK-BAROSS, INC. Bangor, ME 207.942.4838 Caribou, ME 207.498.2547 Westbrook, ME Contact your local 207.854.8411 Concord, dealer:NH 603.224.4063

Dealer Name

GEORGE ASSOCIATES, INC. Silver Spring, MD 301.589.9490 City, ST 123.456.7890 HIGHWAY EQUIPMENT & SUPPLY CO. City, ST Drums, PA 123.456.7890 570.788.1127 Ephrata, PA City, ST 717.859.3132 Harrisburg, PA 123.456.7890 717.564.3031 LockCity Haven, , ST PA 570.769.1070 123.456.7890 PENN JERSEY Deptford, NJ Dealer Name 856.227.6400 Frenchtown, NJ 908.824.4200 City, ST Staten Island, NY 123.456.7890 718.448.2444 Lionville, PA City, ST 610.363.9200 123.456.7890 TYLER EQUIPMENT E. Longmeadow, MA City, ST 413.525.6351 123.456.7890 Berlin, CT 860.356.0840 City, ST VANTAGE EQUIPMENT 123.456.7890 Batavia, NY 585.344.1931 Latham, NY Name Dealer 518.220.9500 Syracuse, NY 315.437.2611 City, ST 123.456.7890 WOODCO MACHINERY Avon, MA City, ST 508.584.8484 123.456.7890 Woburn, MA 781.935.3377 City, SRI T Johnston, 401.942.9191 123.456.7890

You’re serious about getting your bonus. And your crew thanks you.

Our line of pa avvers and compactors sets the standard for reliable asphalt pa aving. ving. W We e haavve a long history of prov o en technology and a reputation e for industry-leading innovation. When it comes to maximizing your earnings, these machines deliverr. See smart in action at volvoce.com/smartroads.

Page 58 • December 30, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

1-800-223-1202 I WWW.ASPHALTCARE.COM 2765 Galloway Road • Bensalem, PA 19020 WE SUPPLY PARTS FOR IR/BLAW KNOX, DYNAPAC, MARATHON, MAULDIN, YANMAR, NEAL, CIMLINE, TOWMASTER, ATLAS COPCO AND MANY OTHERS

Rent

$35,900

$16,500

Buy or Rent

$24,000/OBO

MARATHON 250 MASTIC MELTER 250 gallon, diesel fired, mixer, tool heater, perfect for large crack, pot hole, and storm drain repairs

2014 DYNAPAC CC1200 ROLLER 3-5 ton, 47” drums w/ dual vibration & drive, FROPS, poly water tank, Kubota diesel, approx. 180 hours, warranty

2008 STONE 6100 ROLLER 560 hours, 3-5 ton weight class, 47” drums w/ dual vibration, Kubota diesel, lights

MARATHON KERA400HD OIL JACKETED MELTER 400 Gallon, Dual Diesel Burners w/Auto Temp. Control, Agitation, Heated Hose & Wand, Spare Tire, Fire Ext.

MAULDIN 5-5 CART PATH PAVER 5’-8’ propane screed, Deutz diesel engine, steel track, conveyor feed

TE LOW RA ILABLE NG AVA I C N A N I F

MARATHON ROAD EQUIPMENT IN STOCK!

Oil Jacketed Kettles, Hot Mix Transporters, Tack Distributors, AC-20 Kettles, and Infrared Asphalt Repair

Wirtgen SP 25i Slipform Paver Allows Array of Applications The SP 25i concrete slipform paver from Wirtgen America Inc. updates the existing SP 25 with Tier IV interim-compliant emissions technology. The Wirtgen SP 25i paves 12 ft. (3.6 m) wide, and places barrier/parapet up to 6.5 ft. (2 m). It also features quick onsite changes to left- or right-side pouring. The SP 25i differs from the SP 25 only in its engine specifications, with a Deutz TCD 4.1 LD engine generating 154 hp. The machine’s modular design allows for a wide array of applications with either three or four tracks. It features an Eco mode, which matches engine rpm to machine power requirements, thus saving fuel and reducing emissions. Its maximum operating weight is 44,000 lb. (19,958 kg), depending on configuration and application. Like the SP 25, the SP 25i features quick onsite changes to left- or right-side pouring. The SP 25i is the ideal candidate for a large variety of special jobs, using either stringline or Wirtgen AutoPilot 3D control technology, according to the manufacturer. Mold changes or conversion of the SP 25i from inset to offset configuration can be accomplished quickly and easily on site. An advanced electronic steering and control system ensures that profiles are poured with the highest precision. Easy and convenient operation of the slipform paver guarantees short training periods and high productivity. For more information, call 615/501-0600 or visit www.wirtgenamerica.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

The Wirtgen SP 25i paves 12 ft. (3.6 m) wide, and places barrier/parapet up to 6.5 ft. (2 m). It also features quick onsite changes to left- or right-side pouring.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 30, 2015 • Page 59

S TEPHENSON E QUIPMENT, I NC .

Frederick, MD 21703 301-874-5500

South Plainfield, NJ 07080 908-753-8080

Delmar, MD 21875 410-546-1090

Fairfield, NJ 07004 973-227-2221

Jesco, Inc.

Lumberton, NJ 08048 609-267-2020

Deer Park, NY 11729 844-482-0910

White Plains, MD 20695 301-870-1438

Beacon, NY 12508 845-831-1800

Baltimore, MD 21237 410-687-1700

Middletown, DE 19709 302-376-0784

www.jesco.us

Stephenson Equipment, Inc.

C.N. Wood Co., Inc.

Philadelphia, PA 800-220-4033

Syracuse, NY 800-368-6455

Woburn, MA 781-935-1919

Whately, MA 413-665-7009

Harrisburg, PA 800-325-6455

Albany, NY 518-357-2200

Avon, MA 508-584-8484

Johnston, RI 401-942-9191

Wilkes-Barre, PA 866-667-6756

www.stephensonequipment.com

www.cn-wood.com

Page 60 • December 30, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

The Worldwide Leader in Concrete Paving Technology

info@gomaco.com ❘ www.gomaco.com CONCRETE STREETS AND HIGHWAYS ❘ AIRPORT RUNWAYS ❘ CURB AND GUTTER ❘ SIDEWALKS RECREATIONAL TRAILS ❘ SAFETY BARRIER ❘ BRIDGE PARAPET ❘ BRIDGE DECKS ❘ IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA ❘ 712-364-3347

Murrysville, PA

Somerset, PA

724/327-1300

814/445-7915

Lantz Corners, (Kane), PA

Cranberry Twp., PA

814/778-5250

724/776-1400

Clearfield, PA

Erie, PA

Clarksburg, WV

814/765-1611

814/898-3388

304/842-2222

Chicago Pneumatic Launches Maneuverable Compactor Chicago Pneumatic Construction Equipment has launched the SR 140 soil compactor, joining the SR 130 in its lineup. Designed for compaction operations in pipe trenches, roads, streets and parking lots, it also is ideal for building foundations and construction sites. In addition, its small size is well suited for repair and refilling work, especially in confined spaces. With an operating weight of just over 14,000 lbs. (6,350 kg), the SR 140 features dual speed and dual amplitude with a drum width of 66 in. (167.6 cm) and a drum diameter of 48 in. (122 cm). While the Chicago Pneumatic soil compactor is exceptional in tight spaces, it also is highly maneuverable, even on steep slopes. Paired with a Tier IV Final Kubota engine that has been cross-mounted for easy service access, the machine produces a reliable performance with each job, according to the manufacturer. The new compactor is suitable for all types of supporting and reinforcement courses, including gravel, sand, silt, clay, and sub-base and base materials. Additionally, The SR 140 has several features including low noise and emissions, easy service access and an operator-friendly design. With several operator-friendly features, the SR 140 has a spacious operator platform, which features

ergonomically positioned steps, an adjustable seat, a battery disconnector within easy reach and a lockable storage compartment. Moreover, vibration With an operating weight of just over 14,000 lbs. (6,350 kg), the SR 140 features dual speed and dual amplitude with a drum width of 66 in. (167.6 cm) and a drum diameter of 48 in. (122 cm).

insulation minimizes body and hand vibration to reduce operator fatigue. Operating in standard ECO-mode not only keeps the SR 140 engine rpm and noise levels exceptionally low, but also helps reduce fuel consumption by up to 15 percent. Designed to be convenient for the operator, the soil compactor’s service components can be reached from a standing position from the ground, while a high inlet reduces maintenance by keeping the combustion air clean. “The SR 140 is a great machine with several features to suit the operator, including complete operator comfort and good visibility over the work area and surroundings,” said Tim Hoffman, product manager, rollers. “The versatility and maneuverability of this soil compactor is something that contractors will not only have success on the job with but also come to rely on. Additionally, this machine’s dual speed and dual amplitudes make it great for both thick and thin layers of material.” While many features come standard on the SR 140, it also offers several different options. For more information, visit www.cp.com. For more information, visit www.cp.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 30, 2015 • Page 61

The Best Tilt Hopper Paver Just J Got Better

Introducing the 1000G

ALL ISLAND EQUIPMENT 39 Jersey Street West Babylon, NY 11704 631/643-2605 631/643-4060 allislandequipment.com

HOFFMAN EQUIPMENT COMPANY 1440 Route 9W Marlboro, NY 12542 845/236-3000 www.hoffmanequip.com

JESCO 1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080 Fax: 973/575-5553 118 St. Nicholas Ave. S. Plainfield, NJ 07080 908/753-8080 800/241-7070 Fax: 908/753-7853 www.jesco.us

STEPHENSON EQUIPMENT, INC. Harrisburg, PA 800/325-6455 Fax: 717/564-7580 Wilkes-Barre, PA 866/667-6756 Syracuse, NY 800/368-6455 Albany, NY 518/357-2200

W.I. CLARK 30 Barnes Ind. Pk. Rd. Wallingford, CT 06492 203/265-6781 Fax: 203/294-1216 15 Station Rd. Brookfield, CT 06804 203/775-1203 Fax: 203/740-2579 80 Pratt Rd. Plainfield, CT 06374 860/546-4808 Fax: 860/564-6928 www.wiclark.com

g 8 - 13 ft LeeBoy Legend Screed System LeeBoy’s Under Auger Cut Off Gates 9” Steel Alloy Segmented Cast Augers Low Deck Configuration Hydrostatic Propulsion Controls Dual Control Stations Steel Track Drive with Automatic Adjustment

AMBROSE EQUIPMENT CO. MONROE TRACTOR 1001 Lehigh Station Rd. Henrietta, NY 14467 585/334-3867 866/683-5338 5035 Genesee Street Buffalo, NY 14225 716/681-7100 800/834-9606 www.monroetractor.com

1401 Hooksett Rd. Hooksett, NH 03106 603/644-8787 1 Madison Street Plainville, MA 02762 508/643-0044 www.ambroseequipment.com

www. VT LeeBoyy,, Inc.

. com

500 50 Lincoln County Pkwy Ext., Lincolnton, NC 28092

Call 704.966.3300

US MUNICIPAL SUPPLY INC.

VALLEY SUPPLY & EQUIPMENT CO., INC.

King of Prussia, PA 800/733-3776 www.usmuni.com

20332 Leitersburg Pike Hagerstown, MD 21742 301/733-7414 1109 Middle River Rd. Baltimore, MD 21220 410/780-4000

www www.LeeBoy .LeeBoyy.com

WALSH EQUIPMENT INC. 796 Unionville Rd. Prospect, PA 16052 724/865-9221 2350 Munster Rd. Lilly, PA 15946 814/886-5191 walshequipmentinc.com

Page 62 • December 30, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

PROUD PARTNERS IN SUSTAINABLE PRODUCTIVITY

UNBEATABLE TEAM.

www.atlascopco.us

The Wirtgen Group owes its strength to the excellence of its four product brands – Wirtgen, Vögele, Hamm and Kleemann – with their unique wealth of experience.

# 032515-ACC

Put your trust in the Wirtgen Group team.

www.wirtgenamerica.com

ROAD AND MINERAL TECHNOLOGIES

www.apeasi.com

www.bestline.com

DELAWARE

PENNSYLVANIA

Harbeson (302) 664-1552

Allentown (484) 223-3814

Wilmington (302) 683-0105

Centre Hall (814) 237-0897 Harrisburg (717) 540-7867

ELLIOTT & FRANTZ, INC.

Hatboro (215-675-3009 Lemont Furnace (724) 437-1578 Mechanicsburg (717) 697-1177

www.elliottfrantz.com

Muncy (570) 546-8422 Shippensburg (717) 530-8400

10421 Guilford Road Jessup, MD 20794 301/725-7394 Fax: 301/725-7361

38420 Sussex Highway Delmar, DE 19940 302/846-3033 Fax: 302/846-0763

12051 Tac Court Manassas, VA 20109 703/257-2381 Fax: 703/257-2383

450 E. Church Road King of Prussia, PA 19406 610/279-5200 Fax: 610/279-6366

- Wholesale/Refurb (717) 532-5900 State College (814) 237-9050 Towanda (570) 265-4440 Call today. Get more done tomorrow.

West Chester (610) 241-3633

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 30, 2015 • Page 63

39 Jersey Street West Babylon, NY 11704 631/643-2605 Fax: 631/643-4060 www.allisland equipment.com

1440 Route 9W Marlboro, NY 12542 845/236-3000 www.hoffmanequip.com

1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080 Fax: 973/575-5553 118 St. Nicholas Ave. S. Plainfield, NJ 07080 908/753-8080 800/241-7070 Fax: 908/753-7853 www.jesco.us

THE W.I. CLARK COMPANY 30 Barnes Ind. Pk. Rd. Wallingford, CT 06492 203/265-6781 Fax: 203/294-1216 15 Station Rd. Brookfield, CT 06804 203/775-1203 Fax: 203/740-2579 80 Pratt Rd. Plainfield, CT 06374 860/546-4808 Fax: 860/564-6928 www.wiclark.com

King of Prussia, PA 800/733-3776 www.usmuni.com 1001 Lehigh Station Road Henrietta, NY 14467 585/334-3867 866/683-5338 1701 Roseneath Rd., Richmond, VA 23230 804/359-4048

5035 Genesee Street Buffalo, NY 14225 716/681-7100 800/834-9606 monroetractor.com

Harrisburg, PA 800/325-6455 Fax: 717/564-7580

20332 Leitersburg Pike Hagerstown, MD 21742 301/733-7414

796 Unionville Rd. Prospect, PA 16052 724/865-9221

Wilkes-Barre, PA 866/667-6756

1109 Middle River Rd. Baltimore, MD 21220 410/780-4000 www.valleysupply equipment.com

2350 Munster Rd. Lilly, PA 15946 814/886-5191 walshequipmentinc.com

Syracuse, NY 800/368-6455 Albany, NY 518/357-2200

Page 64 • December 30, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Keys to Choosing Sealcoat Machinery For Your Business By Maury Bagwell

Of course, an experienced contractor can achieve great results on any type of surface using the squeegee or spray method. But, if you want options and even greater durability for your cusWhether you’re starting a new business or looktomers, a sealcoating system with a dual applicator ing to replace an older machine, the equipment can give you the best of both worlds. These you use can make a big difference to your bottom machines apply sealcoat via squeegee or spray, line. Choosing the right sealcoating equipment can giving contractors the freedom to select the method increase your productivity, reduce maintenance that will yield the best result for each particular job. time and give you a faster ROI. Contractors also can use a dual applicator machine So how do you know which sealcoating equipto apply one coat with a squeegee to form a strong ment is right for your operation? Start by taking a bond, and then spray on a second coat for a unigood look at your business and identifying your needs — considering the types and sizes of jobs Choosing the right sealcoating equipment can increase productivity, form finish. Although this method is more expensive and you typically perform. This will help you sort reduce maintenance time and give a faster return on investment. takes more time, the results last 40 percent longer through the wide range of machines that are on the market today and choose which kinds are most applicable to larger commercial jobs, typically require these high-sand than a job done with a squeegee alone or a double-spray mixes since there’s more traffic in those areas than a resi- application — saving the contractor time and money while your unique business. Then, start researching. There are three key factors to con- dential driveway. Only thicker mixes can accommodate the earning more referral and repeat business due to a quality job. In addition, few contractors own a dual applicator; theresider when choosing the best sealcoating equipment for your more frequent use. Beyond pumping thicker materials, the higher pressure of fore, owning one provides a competitive advantage for conneeds: the pump system, application method and tank size. These features vary from machine to machine and influence hydraulic-powered piston pumps allows contractors to move tractors when bidding on jobs. capabilities, overall performance and maintenance require- materials 40 percent faster compared to diaphragm pumps, Machine Sizes and Weights ments. Develop an understanding of these three factors and, meaning that larger jobs get done faster. While the productivity and versatility of the pump are cerJust as understanding pump systems and application before long, you’ll be on your way to better productivity and tainly the key factors to consider, contractors would be methods affects your bottom line, so does finding a machine profits. remiss in not also considering the maintenance of the differ- with a tank suited to fit your operation. If you work primarient styles of pumps. Piston pumps tend to offer the lowest ly on smaller jobs, such as residential driveways or small Pump Systems The pump system is a good place to start your research. overall maintenance. The piston design uses leather seals parking lots, a tank that holds 750 gallons should be enough It’s the main feature of a sealcoating machine and will influ- that require no daily upkeep. This translates to consistently to complete each project without refilling. However, if your high productivity because you’ll only have to rinse out a pis- bread-and-butter jobs are larger, such as airport runways and ence both its operation and capabilities. Professional sealcoating equipment uses one of three ton pump before long-term storage, such as for winteriza- mall parking lots, you may need a larger tank. In conjunction with tank size, consider how you plan to kinds of pump systems: Bowie pumps, air-powered tion. Plus, you should be able to pump at least 150,000 galdiaphragm pumps or hydraulic-powered piston pumps. Each lons of sealcoat before the leather seals need to be replaced. transport the equipment. Being able to easily move it without pump functions differently and will directly affect your Still, it’s a good idea to check the pump once a week to placing too much strain on your vehicle or trailer is crucial to running an efficient sealcoating business. machine’s productivity, pumping capacity and maintenance ensure the seals stay lubricated. Like piston pumps, Bowie pumps don’t require daily Before you buy a machine, make sure your truck or trailneeds. maintenance. However, abrasive high-sand mixes and er has the axle capacity to support the system’s weight. Keep Bowie pumps feature a gear that spins inside of a cylinder. asphalt emulsions can quickly wear down the rotary gear and The gear creates suction that pulls liquid into the intake side cause a gap in the seal, which causes the pump to lose pres- in mind you’ll have to calculate the weight of the equipment of the pump, and then pushes it out the discharge side. sure. A contractor must disassemble the pump and replace plus the material that will be inside of it. Sealcoat generally Typically, these pumps can create enough pressure to move the gaskets and steel wear plates around the seal. These are weighs around 10 pounds per gallon, sometimes more depending on the amount of sand in the mix. That means a sealcoating mix with as much as five or six pounds of sand rather expensive components, which can cost as much as 750-gallon tank that weighs about 4,000 pounds empty will per gallon, which covers most mixes, but not all. Although $1,200 to repair or more than $2,000 to replace. Also, it have another 7,500 pounds of pressure on the axle when Bowie pumps have been around for a long time, they are not should be noted that the service interval is much shorter than filled. commonly used in modern sealcoating operations. with a piston pump, resulting in greater cost and downtime. If it’s a trailer-mounted unit, check your vehicle’s towing Another more common option in the industry is a rubber The lighter diaphragm pumps also require more frequent capabilities. For a skid-mounted unit, you’ll need to deterdiaphragm pump, which pulls liquid in as the diaphragm maintenance. Since diaphragm pumps use rubber seals mine the vehicle’s gross vehicle weight rating, or GVWR. contracts and then pushes it out as it expands. Each pump rather than leather seals or steel plates, those components, For example, a skid-mounted unit with a 750-gallon tank requires an air compressor for power. while cheaper than a Bowie pump’s steel pieces, must be will need a vehicle with at least a 15,000 gvwr. For a system Diaphragm pumps handle many types of materials, regularly replaced. with a 1,500-gallon tank, you’ll likely need 30,000 GVWR. including water and non-abrasive oils. Most produce enough pressure to pump mixes with as much as two pounds of sand Application Method The Best Machine Is the Right Machine per gallon, which is ideal for smaller jobs. For example, resOnce you’ve chosen the right pump for your operation, As with any business, profits are the measure of success. idential driveways don’t receive constant traffic, so mixes consider your application method: squeegee, spray or both. You already know time is money. Choosing equipment that with two pounds of sand per gallon should be strong enough Each has its advantages, depending on the job and type of best fits your business and the types of jobs you perform will to provide adequate protection. However, if you’re in the surface. keep your downtime low and your productivity high. Most market for larger commercial jobs, you’ll need the more Spraying sealcoat can be completed faster than applying it importantly, it will keep you profitable in not just the shortpowerful hydraulic pump. by squeegee, which makes it a more common method. term, but for years to come. A hydraulic-powered piston pump uses pistons to contin- Spraying works better on smooth surfaces because it leaves Maury Bagwell is the lead engineer at Neal uously pull liquid in and push it out. Because hydraulics pro- a more uniform finish. Manufacturing, a division of Blastcrete, which is based in duce more power than an air compressor, piston pumps are Alternatively, the squeegee method continues to gain more Anniston, Ala. He has nearly 25 years of experience in manneeded to pump thicker materials, such as asphalt emulsions popularity since it applies more material for a seal that lasts ufacturing, sales, product design and engineering. His priand newer modified sealers. That piston power can take on longer. It is harder to spread sealer evenly and achieve a mary responsibilities include product development, engimixes with 10 or more pounds of sand per gallon — mixes smooth finish, so the squeegee method tends to work better neering and quality control. that give contractors the ability to take on a wider range of for rough or porous surfaces because it can pack the material (This story also can be found on Construction Equipment projects. For instance, state and federal projects, as well as into the crevices, creating a stronger bond with the pavement. Guide’s Web site at www.constructionequipmentguide.com.) SPECIAL TO CEG

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 30, 2015 • Page 65

Tracey Road Equipment Syracuse 6803 Manlius Center Rd East Syracuse, NY 13057 315-437-1471 Binghamton 1523 Route 11 North Kirkwood, NY 13795 607-775-5010 Rochester 300 Middle Rd Henrietta, NY 14467 585-334-5120 Watertown 19598 Cady Road Adams Center, NY 13606 315-788-0200 Albany 115 Railroad Ave. Albany, NY 12205 518-438-1100 www.traceyroad.com

A. Montano Co, Inc. 571 Route 212 Saugerties, NY 12477 845/247-0206 Fax: 845/247-9321 www.amontano.com

Midlantic Machinery 2240 Bethlehem Pike Hatfield, PA 19440 215-822-0145 Fax: 215-822-7971 6375 Allentown Blvd. Harrisburg, PA 17112 717-652-3190 Fax: 717-540-0251 1261 Highway 315 Wilkes Barre, PA 18702 570-824-9891 Fax: 570-822-3561

Best Line Equipment

E.W. Sleeper Company, Inc.

Groff Tractor New Jersey, LLC

Highway Equipment Company

6 S. Eleanor Ave. Frackville, PA 17931 570-874-6140 Fax: 570-874-4200

25 Legion Rd. Muncy, PA 17756 570/546-8422

391 Loudon Rd. Concord, NH 03302 603/225-3361 800/358-6007 Fax: 603/225-4918

551 N. Harding Highway Vineland, NJ 08630 800-874-2650

22035 Perry Highway Zelienople, PA 16063 724/452-7800 Fax: 724/452-7030

1400 Joh Avenue Baltimore, MD 21227 410-247-2100 Fax: 443-543-0344

212 Monmouth Rd. Freehold, NJ 07728 800-874-2659

McKean, PA 814/476-7755

200 Bomont Place Totowa, NJ 07512 800-558-7426

Dubois, PA 814/371-3600

28587 Sussex Hwy. Laurel, DE 19956 302-715-5382 Fax: 302-715-5384

183 Tomahawk Rd. Towanda, PA 18848 570/265-4440 8001 Possom Hollow Rd. Shippensburg, PA 17257 717/530-8400 www.bestline.com

www.ewsleeper.com

www.grofftractor.com

www.midlanticmachinery.com www.highway-equipment.com

Page 66 • December 30, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Caterpillar’s RM500B Mixer Features ACERT Technology Caterpillar Inc.’s RM500B rotary mixer combines ease of use, performance and reliability to achieve demanding job specifications in both full-depth reclamation and soil stabilization applications. The RM500B replaces the current RM500 rotary mixer and offers many new features and enhancements that increase operator comfort and productivity, including a Cat C15 engine with ACERT Technology. Other features include a sliding pressurized cab, an enhanced operator’s environment, automatic rotor depth control, four mode steering, all wheel drive and three rotor design options that provide optimum performance and versatility to meet variations in job requirements. Operating weight for the RM500B is approximately 62,611 lbs. (28,400 kg) when equipped with a ROPS, a cab and a universal rotor. Powertrain The RM500B features a Cat C15 ACERT engine, a turbocharged, 6-cylinder diesel engine that provides 546 hp (407 kW) of gross power. The engine is designed to meet U.S. EPA Tier IV Final and EU Stage IV emission standards. Every Tier IV Final/ Stage IV Cat engine with ACERT Technology is equipped with a combination of proven electronic, fuel, air and aftertreatment components. Applying proven technologies systematically and strategically lets us meet our customer’s high expectations for productivity, fuel efficiency, reliability and service life. The turbocharged air-to-air aftercooling system provides high horsepower with increased response time while keeping exhaust temperatures low. This generates significant improvements in airflow that increase efficiency and reduce emissions, according to the manufacturer. The modular stacked cooling system provides cool intake air that helps maximize fuel efficiency and minimize emissions. A variable speed fan draws ambient air from a separate compartment in front of the engine through the cooling package. The exhaust air exits from the front of the machine, providing a cool engine compartment. The cooling fan periodically reverses direction for a short interval during operation. This reversal helps the system shed accumulated dust, keeping the cooling system cleaner. This allows the system to operate at ideal cooling capacity to ensure maximum efficiency. The RM500B comes with standard electronically controlled full time all-wheel drive. Four independent variable-displacement propel pumps supply balanced oil flow to the front drive motors and the rear drive motors. Two speed ranges allow operation at either maximum torque for work or greater speed for moving around the job site. Gear

selection is controlled electronically designed to warn the operator of by a keypad button on the operator’s system faults utilizing a three-level console. Infinite variable speed conwarning system. The warnings are trol within these ranges is achieved based on the severity of the probutilizing the propel lever and two lem. A level one warning represents buttons on the keypad. the least severe problem, while a The differential lock feature is level three warning represents the absent from the all-wheel drive most severe. RM500B. Sensors in the propel The speed control function system monitor the pressure at each allows the operator to set the maxipump, making adjustments to equalmum propel speed attainable at the ize the effort of each wheel for true fully forward or rearward position all-wheel drive traction. This of the propel lever. This standard enhancement allows the machine to The RM500B replaces the current RM500 rotary mixer feature is especially useful when the maintain consistent speed and direc- and offers many new features and enhancements that machine is started and stopped freincrease operator comfort and productivity, including quently. tion even in severe conditions. The RM500B is equipped with a Cat C15 engine with ACERT Technology. On-board microprocessors monifour mode steering. The microtor operating conditions, receiving processor processes inputs from sensors on mounts isolate the cab from the machine input signals from sensors in the engine, prothe front and rear wheels along with input frame to reduce vibration transfer to the pel, steering and rotor drive systems. Selffrom the four mode steering selector buttons operator’s station. diagnostic programs provide information for A display monitor is mounted to the for- troubleshooting and alert the operator of on the control console keypad. It provides precise simultaneous wheel movement in ward dashboard. Video from remote cam- potential system problems. If a machine the crab and coordinated steering modes and eras on the front and rear of the machine is fault occurs, a code is displayed on the LCD automatically realigns the rear wheels to displayed on the monitor, enhances the oper- display to alert the operator and assist in center when the front wheels only steering ator’s view to the front and rear of the troubleshooting. mode is selected. In the coordinated mode, machine. Wide, comfortable steps with non-skid the inside turning radius is 14 ft. 2 in. (4.33 Cutting/Mixing System surfaces are placed to provide access to the m). The large, variable-volume mixing chamSensors equalize the ground speed and operator’s station from either side of the ber is mounted mid-point between the front average the readings, which provides more machine. The steps and handrails are and rear tires. When the rotor cutting depth accurate data for the additive metering sys- recessed within the overall machine width to is deep, the effective volume of the chamber tems. The end result is greater precision minimize exposure to obstacles. The top increases to allow for the increase materials. deck is flat, providing good access to either When the rotor is set at a lower depth, the when mixing water, emulsion or both. The large tires have an aggressive tread side of the cab. rotor itself occupies the space within the The comfortable and durable seat has a chamber, making it effectively smaller in and provide a large footprint. Machine weight balance provides stability to the standard in-seat heater and provides adjust- volume. machine when cutting and mixing, resulting ments for maximum comfort. The seat feaThe machine is able to work in both fortures an integrated steering handwheel and ward and reverse due to adjustable front and in a consistent depth. side control console with LCD touch screen. rear doors on the mixing chamber. The The seat rotates 90 degrees from center to heavy-duty front door is powered with two Operator’s Environment The hydraulic sliding cab on the RM500B the right or left to further enhance operator hydraulic cylinders for raise and lower. The repositions from side-to-side and can be comfort. The seat also includes a 3 in. (7.5 front door raises parallel to the cutting surpositioned at any point between the range cm) wide seat belt. face to prevent the door from plowing mateThe integrated control console and hand- rial in harsh soil stabilization conditions. limits utilizing a keypad button on the side. Placing the cab to the far left or right side of wheel steering controller move and rotate This is ideal for peak efficiency on soil stathe machine enhances visibility to the front with the seat. The control console features a bilization, bio-remediation or during mixing of the machine and provides greater sight padded arm rest, a controller keypad, the passes on full depth reclamation. lines to the front tire edge. The operator can propel lever and the LCD touchscreen conThe rear door also is hydraulically operatmove the cab quickly during machine oper- troller. The propel joystick has six thumb ed. The operator can control the sizing of the ation for faster cycle times and increased buttons that allow the operator to conve- material by adjusting the rear door opening. niently control certain rotor functions. production. The narrower the opening, the longer the The LCD touch screen display features a material is processed in the rotor chamber, The cab on the RM500B is fully pressurized to provide a comfortable environment large, easy-to-read interface, function indica- and the finer the sizing. for the operator while keeping noise, dust tors and warning indicators to keep the operAutomatic rotor load control enhances and the elements out. Features included with ator informed of machine operation and vital machine productivity. The on-board microthe cab are: a rotating, heated, cloth seat with systems. The large display panel shows processor constantly evaluates engine rpm integrated control console and LCD touch- information selected by the operator such as and propel speed as required to maintain screen, sound absorbing headliner, left and rotor depth, propel speed selection, steering peak performance. The microprocessor right side lockable doors, tinted glass, air modes, rotor speed and various other func- matches propel speed of the machine to the conditioning, heater/defroster and dual front tions. Information is easily visible in direct load on the engine and adjusts propel speed and rear windshield washer/wipers. A sound sunlight or low light conditions. Functional so that engine speed does not drop below absorbing floor mat provides sure footing switches also are positioned within easy 1,950 rpm The operator can activate the while reducing noise and vibration transmit- reach of the operator on the keypad. automatic load control with button on the The electronic monitoring system is ted to the operator. Four large isolation see MIXER page 70

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 30, 2015 • Page 67

Page 68 • December 30, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

UPCOMING SPECIAL SECTIONS ISSUE

Auction Profiles Ad Closing Date Publishing Date

ISSUE

Excavators Ad Closing Date Publishing Date

ISSUE

6 8 10

March 14, 2016 March 23, 2016

Skid Steers, CTLs Ad Closing Date Publishing Date

ISSUE

February 15, 2016 February 24, 2016

Paving, Compaction, Milling Ad Closing Date Publishing Date

ISSUE

January 18, 2016 January 27, 2016

April 11, 2016 April 20, 2016

Attachments Ad Closing Date Publishing Date

May 9, 2016 May 18, 2016

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 30, 2015 • Page 69

MT-

M413XT

Precision Spr y Products shown with optional equipment.

MAULDIN Paving Products is dedicated to developing products that exceed expectations. See for yourself what makes the industry’s best and heaviest screed lay down the Superior mats your company desires. With 10 years under the belt of proven results, the 10th Anniversary, Silver-16 Screed is better than ever.

MAULDIN Paving Products... MASTERS OF THE MA AT! T! N dealership today and review all the choices available from the MAULDIN Contact your MAULDIN 1750-C 2I¿FLDO &DWDORJ WR VSHF RXW D & WKDW SHUIHFWO\ PDWFKHV \RXU SDYLQJ SUHIHUHQFHV

GEORGE

ASSOCIATES, INC. Construction and Industrial Equipment

2340 Montgomery George Associates, Inc. Street Silver Spring, MD 20910

P Fax: 301-588-6605

2340 Montgomery St. Silver Spring, MD 20910 (301) 589-9490 Fax: (301) 588-6605 www.georgeassociates.info

Asphalt Care Equipment & Supplies 2765 Galloway Road Bensalem, PA 19020 (215) 639-9800 (800) 223-1202 Fax: (215) 639-9802 www.asphaltcare.com

Woodco Machinery

East PBE Inc.

www.woodcomachinery.com

283 Pane Rd. Newington, CT 06111 (860) 665-7470 Fax: (860) 665-7478 www.pbeinc.com

60 Shun Pike Johnston, RI 02919 (401) 942-9191 Fax: (401) 942-9266

140 Wales Avenue Avon, MA 02322 (781) 935-3377 Fax: (781) 935-1563

22 North Maple Street Woburn, MA 01801 (781) 935-3377 Fax: (781) 935-1563

Page 70 • December 30, 2015 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Caterpillar Introduces Rotary Mixer MIXER from page 66

control console keypad. The RM500B provides three modes of rotor depth control. During operation, the microprocessor receives input from the rotor position sensor, rotor mode buttons (on propel joystick) and rotor raise/lower buttons on the propel joystick or on the LCD touchscreen display. The three modes of rotor depth control are: • Travel Mode: When the travel position is selected, the rotor moves to a factory-calibrated full-up position and remains there. This provides clearance for moving the machine over obstructions or traveling between job sites. • Manual Mode: In this mode, the operator controls the position of the rotor by using the raise/lower buttons. A visual depth gauge is positioned on each rotor lift cylinder so the operator can precisely control the cutting depth of the rotor from the operator’s station. • Automatic Mode: Selecting the automatic position provides automatic rotor depth control. In this mode, the microprocessor maintains rotor depth at the position set by the operator. Rotor depth can be displayed on the LCD display panel. The numbers will show in either inches or millimeters. A plus sign (+) means the rotor is above ground, a minus sign (-) means the rotor is below ground. A graphic on the LCD display indicates the position of the rotor. The rotor drive system operates directly through a Cat Powershift transmission and drive axle. The mechanical rotor drive system allows efficient and reliable transfer of engine power to the rotor and is sized to handle tough cutting and deep mixing. A keypad button on the control console is used to engage or disengage the rotor transmission. A choice of three rotor speeds permits working in a wide range of materials, depths and applications. First speed is used primarily for pulverizing the material. Second or third rotor speeds can be used in blending or mixing passes. The rotor speed selection buttons are located on the control console keypad. The rotor is driven on both sides by single strand, high strength drive chains which are contained in heavy-duty chain cases partially filled with oil. A shear disc or optional torque limiter protects the rotor drive components from shock loads. Three rotors are available for the RM500B:

The universal rotor can be used for either full depth reclamation or soil stabilization and is equipped with 200 point-attack carbide-tipped tools mounted in drive-in, knock-out, bolton tool holders and arranged in a chevron pattern for maximum breakout force. The point-attack type tools have long been the standard selection for reclamation applications. The rotor ends are equipped with triple-tree tool placement that provides optimum tool spacing to clean up loose material and reduces drum wear when maneuvering in the cut. Cutting width is 96 in. (243.8 cm) wide. Maximum cutting and mixing depth is 16 in. (40.6 cm). The soil rotor is used for a variety of soil mixing and stabilization applications and blends additives with semicohesive or granular materials. The rotor is equipped with 238 point-attack, carbide-tipped tools mounted in drivein, knock-out, weld-on tool holders and arranged in a chevron pattern for maximum breakout force. Replaceable end rings protect rotor mandrel from wear. The rings are hard-faced for extended service. The rotor has a cutting width of 96 in. wide, and a maximum mixing depth of 20 in. (50.8 cm). The combination rotor is designed primarily for use in soil stabilization applications in cohesive materials, but also works well for light asphalt reclamation. The rotor is equipped with 114 point-attack, carbide-tipped tools mounted in drive-in, knock-out, bolton tool holders and arranged in a chevron pattern for maximum breakout force. Its versatile design is intended for applications where material gradation is of less importance and where higher working speeds are desired. Replaceable end rings protect rotor mandrel from wear. The rings are hardfaced for extended service. The rotor has a cutting width of 96 in. wide, and a maximum mixing depth of 20 in. Serviceability Accessing major service and maintenance points is easy on the RM500B. Daily service points are accessible from ground level and are grouped at certain points around the machine. Large doors provide access to the engine. Hinged ground level side panels provide access to engine components and the cooling system. The hydraulic rotor hood rotates forward to allow service access to the rotor and cutting tools and is held securely in the service postion with a

heavy duty locking pin that slides easily into position. Ground level side access doors on the rotor hood provide convenient access for easy cutting tool removal and replacement. The rotor drive-chains self-lubricate in sealed chain cases partially filled with oil. A lubrication reservoir for the stub shaft bearing is mounted on the front of the hydraulic tank. The reservoir has two separate chambers providing oil to each stub shaft. Oil level is easily monitored from the operator’s station, providing quick visual verification of sufficient oil levels for each stub shaft. Other features that make servicing simple include leak-resistant O-ring face seal hydraulic fittings, grouped quick-connect hydraulic test ports, S•O•S ports, visual site gauges and remote grease points. Hydraulic hoses are held neatly in place with polyurethane routing blocks. The blocks prevent hoses from rubbing against one another, extending the service life and reliability of the hose. Wiring for the electrical system is protected by nylon-braided wrap. Allweather connectors ensure electrical system integrity. Electrical wiring is color-coded, numbered and labeled with component identifiers to simplify troubleshooting. Two maintenance-free Cat batteries power the 24-volt electrical system and are specifically designed for maximum cranking power and protection against vibration. The batteries are mounted on the side of the machine and are accessible from ground level. The machine is equipped with a 150-amp alternator. The machine is Product Link wireready. The Product Link option ensures maximum uptime and minimum repair costs by simplifying tracking of equipment fleets. It can provide automatic machine location and hour updates. Product Link can be obtained through your local Cat dealer. Options include: a roll over protective structure (ROPS), a falling object protective structure (FOPS), a road operation light package, a warning beacon light, a mirror package, a bolt-on counterweight, a remote camera facing the rear chamber door, a folding push bar, an emulsion spray system and a water spray system. For more information, visit www.cat.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

ELLIOTT & FRANTZ, INC 10421 Guilford Road • Jessup, MD 20794 301/725-7394 Fax: 301/725-7361 38420 Sussex Highway • Delmar, DE 19940 302/846-3033 Fax: 302/846-0763 12051 Tac Court • Manassas, VA 20109 703/257-2381 Fax: 703/257-2383 450 E. Church Road • King of Prussia, PA 19406 610/279-5200 Fax: 610/279-6366

MONROE TRACTOR 1001 Lehigh Station Road • Henrietta, NY 14467 585/334-3867 Fax: 585/334-0001 5035 Genesee Street • Buffalo, NY 14225 716/681-7100 Toll Free: 800/834-9606 7300 Eastman Road • N. Syracuse, NY 13212 315/452-0000 Toll Free: 800/287-5286 110 Old Ithica Road • Elmira, NY 14845 607/739-8741 6 Equipment Drive • Binghamton, NY 13904 607/754-6570

EDWARD EHRBAR, INC. 4 Executive Plaza • Yonkers, NY 10701 914/738-5100 Long Island 601 Coates Ave. • Holbrook, NY 11741 631/563-7600 New York City 718/626-3331 42 Kenosia Avenue • Danbury, CT 06810 203/743-0088 Fax: 203/743-0266

SCHMIDT EQUIPMENT INC. 80 Southbridge Rd. • Route 20 • North Oxford, MA 01537 508/987-8786 • 800/922-8295 Fax: 508/987-3578 2397 GAR Highway • Rte 6 & 136 • North Swansea, MA 02777 508/379-9810 • 800/456-6885 Fax: 508/379-1160 88 Camelot Drive • Unit 42 • Plymouth, MA 02360 508/830-9997 • 800/916-0997 Fax: 508/830-1014 1620 Page Blvd • Springfield, MA 01104 413/543-5595 • 800/734-5594 Fax: 413/543-5871 10 Republic Road • North Billerica, MA 01862 978/667-4345 • 800/531-2266 Fax: 978/667-4810 www.schmidtequipment.com 12:55 PM

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 30, 2015 • Page 71

RIDEABILITY WITH VERSATILITY

Together the Vögele Vision 5200-2i paired with a Vögele screed deliver precise results in all applications. Rideability: efficient material handling and superior controllability with precise straight-line tracking and smooth, accurate turns. Versatility: pick the screed to match the applicaiton – all mounted on one tractor! • Front mounted extension screed: multi-variable width paving and mainline paving applications • Rear mounted extension screed: mainline rideability and mainline density • Compaction screed: maximize in-place density, asphalt and roller compacted concrete applications When quality of pavement matters, rely on Vögele pavers and screeds to get the job done.

ROAD AND MINERAL TECHNOLOGIES AMBROSE EQUIPMENT CO. 1401 Hooksett Road Hooksett, NH 03106 603/644-8787 Fax: 603/644-8747 www.ambroseequipment.com

www.wirtgenamerica.com

GROFF TRACTOR & EQUIPMENT, INC. 6779 Carlisle Pike Mechanicsburg, PA 17050 800/33-GROFF 800/33-(47633)

210 Rolling Ridge Drive Bellefonte, PA 16823 888/47-GROFF 888/47-(47633)

963 South Center Avenue New Stanton, PA 15672 888/82-GROFF 888/82-(47633)

20 Stauffer Lane Ephrata, PA 17522 888/66-GROFF 888/66-(47633)

100 Smith Drive Cranberry Twp., PA 16066 877/33-GROFF 877/33-(47633)

4355 Admiral Peary Hwy Ebensburg, PA 15931 877-97-GROFF 877-97-(47633)

CENTRAL EQUIPMENT COMPANY 45 Dempsey-Greaves Lane Stillwater, ME 04489 800/479-6193 Fax: 207/827-3774

BINDER MACHINERY CO.

THE W.I. CLARK CO.

2820 Hamilton Blvd. South Plainfield, NJ 07080 908/561-9000 Fax 908/561-2844

30 Barnes Industrial Park Rd. Wallingford, CT 06801 203/265-6781 Fax 203/294-1216

South Jersey Facility – Winslow Twp. 201 North Route 73 Winslow Township, NJ 08095 856/767-5900

15 Station Road Brookfield, CT 06804 203/775-1203 80 Pratt Road Plainfield, CT 06374 860/546-4808

Page 72 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contact your local dealer: Chadwick-BaRoss Westbrook, ME 207.854.8411

Penn-Jersey Deptford, NJ 856.227.6400

Bangor, ME Frenchtown, NJ Contact your local dealer:908.824.4200 207.942.4838 Caribou, ME Dealer Name 207.498.2547

Lionville, PA Dealer Name 610.363.9200

Concord, NH City, ST 603.224.4063

Staten Island, NY City, ST 718-448-2444

Highway Equipment & City, SCo. T Supply 123.456.7890 Harrisburg, PA 717.564.3031

Rudd City, ST PA Pittsburgh, 123.456.7890 412.741.1731

123.456.7890

City, ST

Drums, PA 123.456.7890 570.788.1127 Ephrata, PA City, ST 717.859.3132

123.456.7890

Lock Haven, PA 570.769.1070 Dealer Name

Malvese Hicksville, City, ST NY 516.681.7600 123.456.7890 Riverhead, NY City, ST 631.369.1147 123.456.7890

McClung Logan Equipment City, ST Company, Inc.123.456.7890 Baltimore, MD 410.242.6500 City, ST Manassas, VA 123.456.7890 703.393.7344 Winchester, VA Dealer Name 540.722.3700 Chesapeake, VA City, ST 757.485.3314 123.456.7890 Richmond, VA City, ST 804.266.0000 123.456.7890 Roanoke, VA

540.989.3750 City, ST

Wise, VA 123.456.7890 276.328.8027 Bridgeville, City, ST DE 302-337-3400 123.456.7890

123.456.7890

Clearfield, PA City, ST 814.765.8500

123.456.7890

Louisville, KY 502.456.4050 City, ST

Charleston, WV 123.456.7890 304.755.7788 Dealer Name Tyler Equipment East Longmeadow, MA 413.525.6351 City, ST 123.456.7890 Berlin, CT 860.356.0840 City, ST

Vantage Equipment 123.456.7890 Latham, NY 518.220.9500 City, ST 123.456.7890 Batavia, NY 585.344.1931 City, ST

Syracuse, NY 123.456.7890 315.437.2611 Woodco Machinery Dealer Name Woburn, MA 781.935.3377 City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890

Some companies have you choose power or fuel efficiency. You chose both.

City, ST 123.456.7890

Volvo developed the industry’s first fuel efficiency guarantee so you never haavve to compromise on performance or productivity. And with CareT Track machine monitoring, you can focus your Talk alk to us today, or get the attention on more important things — like growing your business. T details at volvoce.com/smartfuel.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 73

Page 72 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contact your local dealer: Chadwick-BaRoss Westbrook, ME 207.854.8411

Penn-Jersey Deptford, NJ 856.227.6400

Bangor, ME Frenchtown, NJ Contact your local dealer:908.824.4200 207.942.4838 Caribou, ME Dealer Name 207.498.2547

Lionville, PA Dealer Name 610.363.9200

Concord, NH City, ST 603.224.4063

Staten Island, NY City, ST 718-448-2444

Highway Equipment & City, SCo. T Supply 123.456.7890 Harrisburg, PA 717.564.3031

Rudd City, ST PA Pittsburgh, 123.456.7890 412.741.1731

123.456.7890

City, ST

Drums, PA 123.456.7890 570.788.1127 Ephrata, PA City, ST 717.859.3132

123.456.7890

Lock Haven, PA 570.769.1070 Dealer Name

Malvese Hicksville, City, ST NY 516.681.7600 123.456.7890 Riverhead, NY City, ST 631.369.1147 123.456.7890

540.989.3750 City, ST

Wise, VA 123.456.7890 276.328.8027 Bridgeville, City, ST DE 302-337-3400 123.456.7890

123.456.7890

Clearfield, PA City, ST 814.765.8500

123.456.7890

Louisville, KY 502.456.4050 City, ST

Charleston, WV 123.456.7890 304.755.7788 Dealer Name Tyler Equipment East Longmeadow, MA 413.525.6351 City, ST 123.456.7890 Berlin, CT 860.356.0840 City, ST

Vantage Equipment 123.456.7890 Latham, NY 518.220.9500 City, ST 123.456.7890 Batavia, NY 585.344.1931 City, ST

Syracuse, NY 123.456.7890 315.437.2611 Woodco Machinery Dealer Name Woburn, MA 781.935.3377 City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890

Some companies have you choose power or fuel efficiency. You chose both.

City, ST 123.456.7890

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 73

Page 74 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Caterpillar D8R Military Track-Type Tractor, 1:50 Scale - $60

Caterpillar 980G Military Wheel Loader, 1:50 Scale - $60

John Deere 624J Military Wheel Loader, 1:50 Scale - $40

Case 580 Super Military Green Backhoe/Loader, 1:50 Scale - $50

Allis Chalmers Forty-Five Grader, 1:50 Scale..........................$120

Caterpillar D11R Track-Type Tractor, 1:50 Scale ....................$100

John Deere 315SJ Backhoe/Loader, 1:50 Scale ......................$40

Allis Chalmers HD-21 Dozer, 1:50 Scale ..................................$100

Caterpillar D250E Articulated Truck (NZG), 1:50 Scale ........$125

John Deere 400D Articulated Dump Truck, 1:50 Scale............$50

Allis Chalmers TS-300 Motor Scraper, 1:50 Scale..................$100

Caterpillar D350D Articulated Truck, 1:50 Scale ......................$60

John Deere 460E Articulated Dump Truck, 1:50 Scale............$70

Atlas 1704C Excavator, 1:50 Scale ..............................................$90

Caterpillar GC25K Lift Truck, 1:25 Scale ....................................$50

John Deere 850C Dozer, 1:50 Scale ............................................$45

Bobcat S530 Skid Steer Loader, 1:25 Scale ..............................$45

Caterpillar MH3049 Material Handler w/magnet, 1:50 Scale $140

John Deere 66575 Skid Steer Loader, 1:50 Scale ....................$45

Bobcat S570 Skid Steer Loader, 1:25 Scale ..............................$45

Caterpillar 428B Backhoe/Loader(NZG), 1:50 Scale ................$75

John Deere MC Crawler Dozer, 1:16 Scale ..............................$100

Bobcat S650 Skid Steer Loader, Millionth one, 1:25 Scale ......$65

Caterpillar 428C Backhoe/Loader (NZG), 1:50 Scale ..............$75

Komatsu D51 EX Dozer, 1:50 Scale ............................................$80

Bobcat T550 Track Loader, 1:25 Scale........................................$60

Caterpillar 438C Backhoe/Loader (NZG), 1:50 Scale ............$135

Komatsu D51PXi-22 Dozer, 1:50 Scale ......................................$85

Bobcat T650 Track Loader, Millionth one, 1:25 Scale ................$65

Caterpillar PR-450 Pavement Profiler (NZG), 1:50 Scale ......$135

Komatsu D155 AX Dozer w/ Ripper, 1:50 Scale........................$95

Bobcat 743B Skid Steer Loader, 1:25 Scale ..............................$40

Caterpillar 511OB Excavator, 1:50 Scale ..................................$115

Komatsu D375A Dozer, 1:50 Scale............................................$100

Bobcat 7753 Skid Steer Loader, 1:25 Scale ..............................$45

Caterpillar 621K Motor Scraper, 1:50 Scale............................$150

Komatsu D475A Dozer, 1:50 Scale ............................................$115

Bobcat V518 Versahandler, 1:25 Scale ......................................$65

Caterpillar 631E Motor Scraper, 1:50 Scale ..............................$50

Komatsu GD655 Motor Grader, 1:50 Scale ................................$90

Bucyrus Erie 22B Cable Backhoe, 1:50 Scale ........................$225

Caterpillar 988B Wheel Loader, 1:50 Scale................................$60

Komatsu HM400-3 Articulated Truck, 1:50 Scale....................$100

Case 1102 Vibromax Roller, 1:35 Scale ......................................$75

Caterpillar 988F Wheel Loader (NZG), 1:50 Scale ..................$115

Komatsu PC200-8 Excavator, 1:50 Scale ................................$125

Case CX250C Excavator, 1:50 Scale ........................................$175

Caterpillar 5080 Front Shovel, 1:50 Scale ..................................$60

Komatsu PC360LC Excavator, 1:50 Scale ..............................$100

Case CX210C Excavator, 1:50 Scale ..........................................$50

Caterpillar V-50D Lift Truck (NZG), 1:25 Scale ..........................$50

Komatsu WA380-7 Wheel Loader (NZG), 1:50 Scale ............$135

Caterpillar 215 Excavator (NZG), 1:50 Scale............................$100

Dynapac SD2500 CS Road Paver, 1:50 Scale ........................$125

Komatsu WA500 Wheel Loader, 1:50 Scale ..............................$90

Caterpillar 325L Excavator (NZG), 1:50 Scale ........................$160

Grove TM1500 White 6 Axle Crane, 1:50 Scale ......................$140

Komatsu WB146 Backhoe/Loader, 1:50 Scale..........................$75

Caterpillar 340D L Excavator, 1:50 Scale..................................$150

Gehl 680 AWS Compact Wheel Loader, 1:50 Scale ................$25

Liebherr 531 Wheel Loader, 1:50 Scale ......................................$50

Caterpillar 365B L Series II Excavator, 1:50 Scale..................$100

Hyundai 210N-9 Wheeled Excavator, 1:50 Scale ....................$100

Link Belt 250 X3 Excavator, 1:50 Scale ....................................$150

Caterpillar 365C L Front Shovel, 1:50 Scale ............................$110

International 175 Crawler w/Demo Bucket, 1:25 Scale..........$150

Terex 33-07 Off-Highway Truck (NZG), 1:40 Scale....................$75

Caterpillar TH407C Telehandler, 1:32 Scale ............................$100

International 350 PayHauler, 1:50 Scale ..................................$225

Vogele 1900-2 Road Paver, 1:50 Scale......................................$140

Caterpillar 428 Backhoe w/Hammer, 1:50 Scale ......................$50

International 560 PayLoader, 1:50 Scale ..................................$140

Vogele 2100-3 Road Paver, 1:50 Scale......................................$145

Caterpillar D6K XL Track-Type Tractor, 1:50 Scale ..................$65

International TD-14 Crawler Dozer, 1:16 Scale........................$140

Vogele MT3000-2i Power Feeder, 1:50 Scale ..........................$145

Caterpillar D6R Track-Type Tractor, 1:50 Scale ........................$90

International TD-25 Dozer w/Umbrella, 1:50 Scale ..................$65

Volvo A40F Articulated Dump Truck, 1:50 Scale ....................$110

Caterpillar D7E Track-Type Tractor, 1:50 Scale ........................$85

JCB 467 WLS Front End Loader, 1:50 Scale ..........................$120

Volvo L220G Wheel Loader, 1:50 Scale....................................$120

Caterpillar D10N Track-Type Tractor, 1:50 Scale ......................$50

JCB 531 Loadall W/Bucket, 1:35 Scale ......................................$80

Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale ......$120

Caterpillar D10 Track-Type Tractor (Conrad), 1:50 Scale ......$185

JCB 930 Rough Terrain Fork Lift, 1:35 Scale ............................$50

Wirtgen Wr240 Recycler, 1:50 Scale ........................................$140

Shipping and Handling Included

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Page 76 • December 30, 2015 • www.constructionequipmentguide.com • Mini & Compact Section • Construction Equipment Guide

CASE AUTHORIZED DEALERS D DELAWARE EL AWARE

PENNSYLVANIA PENNSYLVANIA

E agl e P owe r & E q u i p m e n t

A .R. Beat t y

New Castle

Erie Yooungsville

(302) 652-3028

Folcomer Equipment Greenwood

(302) 349-5760

Beauregard Equipment

Grof f Tractor

Hermon Scarborough

Bellefonte Cranberry TTw wp Ebensburg Ephrata Mechanicsburg New Stanton

(207 ) 848-2050 (2 0 7 ) 8 8 5 - 0 6 0 0

M MARYLAND ARYL AND Folcomer Equipment (410) 575-6580 Aberdeen Baltimore (410) 247-7454 Upper Marlboro (301) 627-3938

Grof f Tractor Frederick

(301) 663-3185

M MASSACHUSETTS ASSACHUSETTS

VERMONT VERMONT Colchester

NEW NEW HAMPSHIRE HAMPSHIRE Beauregard Equipment Concord

(603) 225-6621

Townline Equipment Plainfield

(603) 675-6347

NEW NEW JERSEY JERSEY Freehold Tootowa Vineland

(732) 780-4600 (973) 785-4900 (856) 697-1414

Powerco Clinton

(908) 735-2149

NE NEW WY YORK ORK Hof fman Equipment B r on x Marlboro M ed f o r d

(718) 822-1180 (845) 236-3000 (631) 207-2900

Monroe Tractor Binghamton Buf falo Henriet ta Horseheads Latham Nor th Syracuse

*Select factor y scheduled maintenance through ProCare. See dealer for details.* * See your dealer for the complete terms of CNH’s Warranty and Limitation of Liability, which contains certain limits and exclusions. ProCare is a factory-fit program available only on select 2013 and newer machines. ©2015 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or

(607 ) 754-6570 (716) 681-7100 (585) 334-3867 (607 ) 739-8741 (518) 785-8013 (315) 452-0000

( 5 70 ) 4 2 0 - 0 8 7 7 (570) 825-7711

Powerco Allentown

C as e o f N ew E nglan d (508) 845-4343 ( 781) 933-4217

(814) 353-8400 ( 724) 898-1535 (814) 472-7300 ( 717) 738-0220 (717 ) 766-7671 ( 724) 755-0124

Medico Industries Stroud TTw wp Wilkes-Barre

Shrewsbury Woburn

Grof f Tractor NJ

E agl e P owe r & E q u i p m e n t Chester Springs (610) 458-7054 Montgomeryville (215) 699-5871

MAINE MAINE

Only CASE planned for Planned Maintenance.

(814) 899-4294 (814) 563-4808

(610) 395-3775

Beauregard Equipment (802) 893-1555

V VIRGINIA IRGINIA Lawrence Equipment Ashland Bridgewater Cloverdale Suf folk Waynesboro

(804) 752-8333 (540) 515-9670 (540) 966-0151 ( 757 ) 539-0248 (540) 942-2610

W WEST E ST V VIRGINIA IRGINIA State Equipment Beaver Cross Lanes Parkersburg Shinnston

(304) 252-5300 (304) 776-4405 (304) 422-4093 (304) 592-0491

Construction Equipment Guide • Mini & Compact Section • www.constructionequipmentguide.com • December 30, 2015 • Page 77

NEW ROGERS 40 TON PLATFORM IN-STOCK!! No-Foot Neck - 24' Deck Air Lift Flip 3rd Tri-axle weight 18,500# !! Rogers TAG 25XXL, Air Lift Front Axle, 235’s on Aluminum.

Rogers No-Foot, Custom 55 Ton, Heavy Lift Package, 26’ Clear, Bucket Cutout, Adjustable Width Bi-Fold Ramps, Rogers Blue Paint................ ............IN STOCK!

HEAVY LIFT PACKAGE!

NEW ARRIVAL! Rogers 50 Ton Gentle Riser, 25’ Clear, Bi-Fold Ramps, Cut Out, 275’s on Aluminum, Night Lights, Strobes ..............................................................IN STOCK!

Rogers TAG 25XXL, 3-Down Suspension, 215’s on Steel Disc. Rogers TAG 21XXL’s, 235’s on Aluminum, Red & Black Paint.

IN STOCK!

NEW ARRIVAL! ASK ME ABOUT AIR RAMPS!

Rogers 40 ton Custom, 24' clear, Cutout, Adjustable Width Bi-fold Ramps, 275's, Aluminum, Air Lift Flip 3rd, Tri-axle weight 18,000lbs, Black or Red ................IN STOCK!

New Rogers 55 ton CobraNeck, 26' clear deck, custom bucket cutout, 275's, twinbag air lift, strobes.... ..............IN STOCK!

Rogers Custom CR55PL110, No-Foot Neck, 25’ Clear Deck, Adjustable Width Bi-Fold Ramps, 275’s, Aluminum, Night Lights, Strobes, Mack Green ..............IN STOCK!

Rogers 55 Ton, 25’ Clear, Wedge Style Front, Custom 5th Wheel Height, Air Lift 3rd, Air Lift Flip 4th....IN STOCK!

Rogers 50 Ton Custom, 24' clear, Cutout, Adjustable Width Bi-fold Ramps, Reinforced Wheelcovers, 275's, Aluminum, Air Lift 3rd ........IN STOCK!

NEW ARRIVAL!

WEDGE FRONT!

NEW ARRIVAL!

Page 78 • December 30, 2015 • www.constructionequipmentguide.com • Mini & Compact Section • Construction Equipment Guide

John Deere Upgrades G-Series Lineup With 17G, 26G Compact Excavators

15 Katrina Road • Chelmsford, MA 01824 800-804-0775 64 Cambridge Drive • Monroe, CT 06468 855-281-2211 www.chadwick-baross.com

PO 12010 121 Karner Road • Albany, NY 12212 518-456-1445 • Fax: 518-456-8600

252 Atlantic City Blvd. • Bayville, NJ 08721 732-361-4487 • Fax: 732-606-0640 2076 Richmond Terrace • Staten Island, NY 10302 718-448-3002 www.jerseyrents.com

454 Route 13 South • P.O. Box 424 • Milford, NH 03055 603-673-2640 • Fax: 603-672-0019 www.chappelltractor.com

The 17G and 26G incorporate a 14.5 hp (10.8 kW) and 20.0 hp (14.9 kW) Final Tier IV/EU Stage IV diesel engine without the complexity of an aftertreatment system.

John Deere continues to upgrade its G-Series excavator cm) wider and 6 in. (15 cm) taller. The 17G cab remains lineup with the introduction of the 17G and 26G compact unchanged from the D Series model. 159 North Avenue • Skowhegan, ME 04976 207-858-0051 • 1-888-875-3954 • Fax: 207-858-0052 excavators. These machines offer a Final Tier IV compliant Within the operator station a new seat with adjustable www.heavymachinesinc.com engine without the need for an after treatment device, a spa- wrist rests for daylong comfort was added and a suspension cious cab and smooth, responsive hydraulic controls. The seat is standard. The foldable travel pedals are positioned to nimble excavators were designed with the rental, commer provide efficient operation with maximizing foot room and cial/residential building, landscaping, underground and site low-effort pilot controls deliver smooth, combined-function Washington Air development industries in mind. performance. Rental Co. operator focused of the 17G and 26G models While focusing on improving uptime, Deere added a Compressor “The design John maintain proven, John Deere reliability with a few nice third service door to both excavators to provide improved 12529 Parklawn Dr. • Rockville, MD 20852 Wall, product marketing to the cooling core and other daily checkpoints. The 301-230-5800 • Fax: 301-230-5830 refinements,” said Mark manager access 1800 4th St. NE • Washington, DC 20002 of excavators, John Deere Construction & Forestry. “These cores were positioned side-by-side rather than being stacked 202-635-1500 compact machines boast big productivity feainline to permit easier fluid and lubrication access. and uptime Extended 4622 42nd Pl. • Hyattsville, MD 20781 tures, as well as updates that focus on lower daily operating intervals and sight gauges help keep maintenance and 301-277-1300 costs.” expenses at a minimum. to all G-Series models, the Similar 7304 Grove Rd. • Frederick, MD 21701 a 14.5 hp The 17G and 26G incorporate (10.8 kW) and compact excavator includes unique features such as an oil301-662-7711 20.0 hp (14.9 kW) Final Tier IV/EU Stage IV diesel engine impregnated boom, arm, and bucket bushings to help deliv- 44180 Wade Dr. • Chantilly, VA 20152 models also come equipped the complexity of an aftertreatment system. without This er long-term durability. Both 703-742-6200 means the customer has no DOC and no DPF, and thus no with rubber tracks. www.washair.com requirement for DEF. The noticeably quiet engines allow Those operators looking to expand their equipment utito the lization contractors to work at any place, at any time, according can look no further than John Deere’s Worksite Pro manufacturer. attachments. A manual wedge-style quick-coupler speeds The 26G utilizes the same operator’s station as its 35G switchover, going from buckets to other attachments in minbrethren (open station or cab with heat only). The hinge por- utes. Previous D-Series attachments will work on both the tion of the door design was simplified to provide better visi- 17G and 26G too. bility. Additionally, the door width was increased by more For more information, visit www.JohnDeere.com. than 3 in. (7.6 cm) to allow for easier entry and exit from the (This story also can be found on Construction Equipment cab. The new cab has a larger front window that is 2 in. (5 Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Mini & Compact Section • www.constructionequipmentguide.com • December 30, 2015 • Page 79

Link-Belt® Spin Ace® ([FDYDWRUV DUH SDFNHG ZLWK DOO WKH SRZHU SURGXFWLYLW\ DQG IXHO HI¿FLHQF\ \RX¶YH FRPH WR H[SHFW IURP XV DORQJ ZLWK D PLQLPXP VZLQJ UDGLXV GHVLJQ IRU EHWWHU PDQHXYHUDELOLW\ DW VLWHV ZKHUH ZRUN VSDFH LV DW D SUHPLXP 7KRXJKWIXO UHGHVLJQ RI FRXQWHUZHLJKWV DQG ERRP SODFHPHQW PDNHV WKHP LGHDO IRU UHVLGHQWLDO FRQVWUXFWLRQ XWLOLW\ ZRUN DQG VSHFLDOW\ WUHQFKLQJ MREV 5RRP\ UHGHVLJQHG FDE +LJK GH¿QLWLRQ IXOO FRORU Ǝ /(' PRQLWRU &RQYHQLHQW JURXQG OHYHO VHUYLFH DQG ÀXLG FKHFNV Extended service intervals 7LHU $ FHUWL¿HG ,VX]X HQJLQHV \HDU VXEVFULSWLRQ WR 5HPRWH&$5(™ WHOHPDWLFV $OO WKLV ZLWK WKH LQGXVWU\¶V EHVW VWDQGDUG ZDUUDQW\

Model #

Operating Wt.

Net hp @ rpm

Tail Swing

; 6SLQ $FH

OEV

KS # USP

ƍ Ǝ

; 6SLQ $FH

OEV

KS # USP

ƍ Ǝ

; 6SLQ $FH

OEV

KS # USP

ƍ Ǝ

; 6SLQ $FH

OEV

KS # USP

ƍ Ǝ

<RXU /LQN %HOW ([FDYDWRU GHDOHU KDV WKH ULJKW 6SLQ $FH IRU \RXU DSSOLFDWLRQ DORQJ ZLWK XQFRPSURPLVLQJ VHUYLFH DQG VXSSRUW WR NHHS WKHP SHUIRUPLQJ DW WKHLU EHVW

*75 X3 and 80 X3 engines are Final Tier 4

Page 80 • December 30, 2015 • www.constructionequipmentguide.com • Mini & Compact Section • Construction Equipment Guide

Volvo EC60E Balances Compact Footprint With Power The new EC60E crawler excavator from Volvo Construction Equipment is built to perform on any job site — from confined spaces to major construction projects. Equipped with a Volvo Tier IV final engine and adjustable hydraulic flow, the machine offers a 10 percent increase in swing force and lifting capacity, as well as a 20 percent increase in power — all while boasting an 8 percent improvement in fuel efficiency as compared to the prior series model. With a compact design, heavy-duty arm and offset boom, this versatile and powerful excavator is suitable for any application, according to the manufacturer. “The EC60E fits in a unique size class that balances a compact footprint with impressive power and spacious operator environment,” said John Comrie, utility product manager at Volvo Construction Equipment. “The machine’s exceptional lifting capacity, coupled with its fuel-saving features and redesigned cab make it a powerful and efficient choice for any job.” Complete Control The machine’s highly responsive controls ensure fluid movement throughout each cycle. The auxiliary hydraulic flows, electric dozer blade and boom offset speed can be adjusted by the operator and tailored to three different work response modes — “Active”, “Normal” or “Soft” — to suit the operator’s work style and deliver the proper power for the task at hand. The redesigned, proportional joystick provides better grip and further increases ease of control. Covered for Life The swing frame, the boom and the arm ends are all made of cast iron, providing increased stress distribution. Hardened pins and bushings are designed to keep tight pivot tolerances for minimum wear. These robust design features ensure the machine is ready to work year after year — backed by the Volvo Lifetime Frame and Structure Warranty. The boom, arm and frame of the EC60E are fully covered under the warranty, ensuring Volvo or an authorized dealer will repair or replace boom, arm and frame components as necessary during the period of initial ownership or for the full life of the equipment — whichever is less. Comfort and Convenience The EC60E features a new-generation Volvo cab that is 10 percent more spacious. The updated cab design allows for more seat travel or seat recline, giving the operator more freedom of movement. Updated features, including a phone tray, two power sockets, cup holder and three general storage spaces make the Volvo cab a more convenient working environment than ever before.

every 30 hours without interrupting machine operation or performance. This equates to greater uptime and increased life of components. The new Volvo Tier IV final engine and improved hydraulics work together to offer enhanced fuel efficiency. With the standard auto idle and engine shut down feature — a unique offering from Volvo — the engine automatically adjusts to low idle after a predetermined time, and eventually shuts down entirely after a predetermined time of no work. These features can significantly reduce fuel consumption, as well as reduce total machine hours, which can extend service intervals and increase resale value of the machine, according to the manufacturer. The EC60E comes standard with Volvo CareTrack telematics and Volvo MATRIS (machine tracking information system) software. Together, the technologies allow the fleet manager to remotely monitor a wide range of machine diagnostics and machine location in real time. MATRIS also allows the fleet manager to analyze operator behavior over time and make training recommendations that help improve productivity and efficiency while reducing unnecessary wear on the machine. For the fleet manager who sees benefit in telematics monitoring, but can’t devote the time to do so, Volvo now offers ActiveCare — a dealer-supported telematics monitoring and reporting service, which can be coupled with customized service agreements, a range of warranty options and even the Volvo Uptime Guarantee under the new Volvo SmartCare program. Adapt With Ease The EC60E can be equipped with a wide range of durable attachments for multiple applications, including utility work, building development, agriculture, landscaping and forestry. Equipped with the optional Volvo Equipped with a Volvo Tier IV final engine and adjustable hydraulic flow, the attachment carrier (mechanical or machine offers a 10 percent increase in swing force and lifting capacity, as well as hydraulic), attachments can be changed out a 20 percent increase in power — all while boasting an 8 percent improvement in quickly and efficiently. fuel efficiency as compared to the prior series model. A complete range of buckets — from general-purpose to ditching — are available and The cab’s air conditioning is 10 percent monitor on the right-hand side. The screen allow the machine to accomplish a variety of more efficient compared to previous models, displays all machine information, allowing tasks with precision. The Volvo lineup of with six adjustable vents that allow for better easy access to machine functions. The hot durable hydraulic breakers is fully compatiairflow throughout the cab. The high-capac- keys allow the operator to directly access ble with the EC60E. The wide range of breaker tools have been designed to withity cooling system is driven by 43.3 kW of pre-set functions for added convenience. stand a variety of materials and combine power, allowing the EC60E to work in excellent performance with low noise and extreme climates. Do More With Volvo All-around visibility is improved by introGround-level service access and conven- vibration levels. The machine also can be ducing thinner pillars and a larger glazed ient greasing points reduce service time and equipped with the Volvo thumb, which is area with bigger wiper blades. The rear-view maintenance costs. Service intervals can eas- designed to work with both Volvo direct-fit camera offers a clear view of the job site on ily be monitored via the in-cab screen, which buckets or with a Volvo attachment carrier. For more information, call 717/532-9181 the interior 7-inch color LCD display, ensur- displays upcoming maintenance reminders. ing there are no blind spots even in the most The EC60E also offers three selectable or visit www.volvo.com. (This story also can be found on confined working areas. options — automatic, active and park — for For easy, intuitive operation, the keypad a regeneration filter cleaning process, which Construction Equipment Guide’s Web site at groups together all controls with the LCD automatically removes particulate matter www.constructionequipmentguide.com.)

Construction Equipment Guide • Mini & Compact Section • www.constructionequipmentguide.com • December 30, 2015 • Page 81

RESPECTFULLY DISREGARDS CONVENTIONAL EXCAVATOR WISDOM. Plenty of people make compact excavators. But none can say they engineered the first mini-excavator, zero tail swing excavator, swing-boom excavator and rubber-tracked excavator. At Yanmar, we simply can’t stop innovating. That’s why our nine excavators – seven with true zero tail swing – are each purpose-built to overcome the most challenging conditions, work with unparalleled power and conserve fuel. So, if you just want to play around on your jobsite, go get any old excavator. BUT IF YOU’D RATHER RULE YOUR JOBSITE, GET A YANMAR. RuleTheJobsite.com

ASPHALT CARE EQUIPMENT & SUPPLIES 2765 Galloway Road Bensalem PA 19020 215/639-9800 1-800/223-1202 Fax: 215/639-9802 www.asphaltcare.com

E.W. SLEEPER COMPANY, INC.

PITTSFIELD LAWN & TRACTOR

CONTRACTOR’S CONNECTION, LLC

391 Loudon Road Concord, NH 03302 603/225-3361 800/358-6007 Fax: 603/225-4918 www.ewsleeper.com

1548 W. Housatonic St. Pittsfield, MA 01201 413/443-2623 Fax: 413/499-0023 www.plt.com

850 Wilmington Ave. Washington, PA 15301 724/228-8865 www.contractorsconnection.biz

STEPHENSON EQUIPMENT, INC. EQUIPMENT EAST, LLC

G&H EQUIPMENT 314 Old Maple Lane North Haven, CT 06473 203/239-3376 www.ghequip.com

61 Silva Lane Dracut, MA 01826 978/454-3320 Fax: 978/454-3325 www.equipmenteast.com

ROVENDALE AG & BARN EQUIPMENT 1300 Susquehanna Trail Watsontown, PA 17777 570/538-9564 34872 Route 6 Wysox, PA 18854 570/265-7200 www.rovendaleag.com

6018 Drott Dr. Syracuse, NY 13057 800/368-6455 1886 Duanesburg Rd. Duanesburg, NY 12056 518/357-2200 www.stephensonequipment.com

Page 82 • December 30, 2015 • www.constructionequipmentguide.com • Mini & Compact Section • Construction Equipment Guide

Hyundai Unveils Tier IV Final 9A Series Compact Excavators Hyundai Construction Equipment Americas recently began delivering its new 9A series of Tier IV Final-compliant compact excavators throughout the United States and Canada. These machines range from 1.8 to 9 ton (1.7 to 8.2 t), and include the miniR17Z-9A, R25Z-9A, R35Z-9A, R55-9A and R60CR-9A models and the midi-R80CR-9A model. “The new Hyundai 9A series compact excavators are all about bringing big power to small spaces. Each model features an environmentally friendly engine that provides impressive performance and reduced fuel consumption,” said Corey Rogers, marketing manager, Hyundai Construction Equipment Americas. “Our customers in the building, landscaping, road and bridge, site prep and underground markets in particular will appreciate the hefty power, durability and reliability of these compact machines, along with their ability to work productively in confined spaces.” The new Hyundai 9A series models R17Z-9A and R25Z-9A are powered by Kubota engines, and the R35Z-9A, R55-9A, R60CR-9A and R80CR-9A are powered by Yanmar engines. Both the Kubota and Yanmar engines provide efficient fuel combustion and reduced noise. The product line gives contractors a choice of models in each of six popular weight classes: 1.8, 2.7, 3.5, 6 and

9 ton (1.7, 2.5, 3.5, 5.5, 6.0 and 8.2 t). Comfortable, Durable Operating Environment “Like all Hyundai construction equipment, the Hyundai 9A series compact excavators are designed for maximum performance, precision and versatility, with features and technology that make the operating experience more comfortable, more ergonomic and more user-friendly,” Rogers said. The spacious, ergonomically designed cabs deliver reduced noise and increased comfort and visibility. A tilting left-side console makes it easier for the operator to enter and exit the cab, and the left and right control levers are located for convenient access. An adjustable suspension seat and plenty of space helps reduce operator stress and fatigue. The cabs on the Hyundai 9A series machines are all TOPS, ROPS and FOPS certified. Other safety features include optional boom and arm cylinder locks, and an optional overload alarm. An optional lever pattern change valve, positioned for easy access, on the R25Z-9A and R35Z-9A models allows joystick control to be changed from SAE to ISO pattern, depending on operator preference. The advanced LCD cluster on the Hyundai R55-9A, R60CR9A and R80CR-9A allows the operator to select other machine preferences. The same monitor

and R35Z-9A allows operators to work near buildings, in single lanes on roadways or in other confined settings. The variable undercarriage on the R17Z-9A — which can be adjusted to between 3 ft. 3 in. and 4 ft. 3 in. (1 m and 1.3 m) wide — allows the most compact machine in the line to work in even the tightest limited-space work environments.

Enhanced reliability features on the 9A series compact excavators include bushings designed for long-life lube intervals, wearresistant and noise-reducing polymer shims, and integrated preheating systems, which extend service intervals and reduce machine downtime. Serviceability enhancements include wide open engine hoods, centralized grease fittings and easy-change plastic air cleaners. The R60CR-9A and R80CR-9A models feature a tilting cabin for convenient maintenance and service.

also displays engine rpm, oil and water temperature and information for all onboard electronic devices. Button selections are provided for auto idle mode, max power mode and travel speed. Performance “Innovative hydraulic system technologies make the 9A series compact excavators fast, smooth and easy to control,” Rogers said. To achieve optimum precision on the R55-9A, R60CR-9A and

R80CR-9A models, Hyundai redesigned the hydraulic system to provide the operator with superfine touch and improved controllability. An arm flow summation system provides energy savings, reduced cavitation and increased speed. The boom swing function on the 9A series compact excavators is designed for efficient work in congested areas. The boom can be offset left or right. Zero-tail swing on the Hyundai R17Z-9A, R25Z-9A

Reliability and Serviceability “The Hyundai 9A series compact excavators are designed to maximize profitability through improved efficiencies, enhanced service features and longer life components,” Rogers said. Enhanced reliability features on the 9A series compact excavators include bushings designed for long-life lube intervals, wearresistant and noise-reducing polymer shims, and integrated preheating systems, which extend service intervals and reduce machine downtime. Serviceability enhancements include wide open engine hoods, centralized grease fittings and easy-change plastic air cleaners. The R60CR-9A and R80CR9A models feature a tilting cabin for convenient maintenance and service. For more information, visit www.hceamericas.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

JLG G5-18A Proves Ideal for Confined Spaces or Overhead Restrictions The JLG G5-18A super compact telehandler is ideally suited for work in confined or congested spaces and any application with overhead height restrictions. Operators appreciate the enhanced visibility over the engine side of the machine and comfortable cab, designed to reduce operator fatigue. It features a tight 127-in. (322.6 The JLG G5-18A features a tight 127-in. (322.6 cm) turn- cm) turning radius, enabling moveing radius, enabling movement through crowded job ment through crowded job sites and sites and a stowed height of less than 76 in. (193 cm). a stowed height of less than 76 in.

(193 cm). The G5-18A features a maximum lift height up to 18 ft. (5.5 m), an extended outreach of 11 ft. (3.3 m), and a 5,500-lb. (2,495 kg) maximum lifting capacity. The machine also offers a variety of attachments for versatility in handling jobsite challenges. The G5-18A was redesigned in 2013 to provide enhanced reliability and serviceability. It features a powerful, Tier IV final Deutz engine,

which provides higher levels of fuel efficiency and reduces the impact on the environment. In addition, it offers an optional reversing fan, which is a benefit in dusty environments, as it allows the operator to reverse the fan to “clean out” the radiator, according to the manufacturer. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Mini & Compact Section • www.constructionequipmentguide.com • December 30, 2015 • Page 83

Delaware

Elliott & Frantz Delmar

(800) 220-3015

Maine

Frank Martin Sons Fort Kent Mills Madison

(207) 834-3171 (207) 858-4748

Maryland

Elliott & Frantz Jessup

(800) 220-3752

Massachusetts DEALER DEA ALER Inc IMPRINT AREA Chadwick-Baross, Chelmsford

(800) 804-0775

New Hampshire

E.W. Sleeper Company Concord

(603) 225-3361

New Jersey

Harter Equipment Englishtown

(732) 446-7600

New York

All Island Equipment West Babylon Contractor Sales Co Albany Tracey Road Equipment Adams Center East Syracuse Kirkwood Westchester Tractor Brewster Baschmann Services, Inc. Elma

(631) 643-2605 (518) 456-1445 (315) 788-0200 (315) 437-1471 (607) 775-5010 (845) 278-7766 (716) 655-1101

Pennsylvania

Elliott & Frantz King of Prussia (610) 279-5200 Highway Equipment Company Dubois (814) 371-3600 McKean (814) 476-7755 Zelienople (724) 452-7800 Medico Industries Stroud Township (570) 420-0877 Wilkes-Barre (570) 825-7711

ONE FOCUS. COMPLETE SOLUTIONS. > > > > >

Vermont

Hill-Martin Corporation Northfield

(800) 451-5016

Virginia

Elliott & Frantz Manassas (703) 257-2381 Link-Belt Mid Atlantic Ashland (804) 798-2290 Chesapeake (757) 485-4485 Highway Equipment Company Mid Atlantic Troutville (540) 992-4650

West Virginia

Anderson Equipment Charleston Fairmont

(304) 756-2800 (304) 366-3075

> > >

Page 84 • December 30, 2015 • www.constructionequipmentguide.com • Mini & Compact Section • Construction Equipment Guide

Manitou Americas Introduces New Mustang 550Z Compact Excavator Since entering the excavator market in 1987, Mustang has focused on providing the right mix of compact excavators for the market. The brand new addition to Mustang’s compact excavator line, the 550Z, enhances its North American excavator offering with its 6 ton (5.5 t) size. The 550Z is equipped with a 47.6 hp (35.5 kW) Yanmar Tier IV-certified, turbocharged diesel engine, which features an electronic throttle for precise control. Cost savings are made possible with the ECO mode and auto deceleration features. When activated by the flip of a switch inside the cab, ECO mode will reduce the engine speed by 10 percent without sacrificing power, while auto deceleration decreases the engine speed to idle after four seconds without hydraulic movement. These two features provide a combined result of 20 percent reduction in fuel consumption, according to the manufacturer. The operator’s station has many features to enhance productivity and controllability. The controls on the 550Z include a proportional auxiliary hydraulic rocker switch, which enhances attachment options. This allows the operator to adjust the hydraulic flow for optimal attachment performance. The operator can easily select standard ISO or an optional backhoe control pattern with a turn of a mechanical lever. A boom offset swing of 68 degrees in both directions allows for digging a square hole without repositioning the machine. An integrated digital display located in a highlyvisible area features recordable maintenance history with adjustable time intervals and reminders. The display unit also records hours used for the past 90 days and can be monitored without starting the engine. An angle blade with float and bolt-on cutting edge is a factory installed option. Using the rocker switch on the blade lever, the hydraulic angle blade can be angled 25 degrees to push material aside as the machine moves forward, eliminating the need for repetitive repositioning. The blade can be simultaneously angled and raised or lowered to reduce the amount of time backfilling. The operator’s station offers multiple ergonomic and convenience features. A 4-way adjustable seat offers custom height, weight and backrest positions with a retractable belt. An optional cab enclosure, with heat or heat/air-conditioning systems, provides comfort and protection in extreme weather conditions. The front window can be stowed overhead for additional air flow when weather permits, and also increases visibility and communication with bystanders when needed. Tool-free component access is made possible by large swing-out doors on the back and right-hand side of the machine. These compartments reveal the entire engine and daily maintenance points; radiator, oil cooler, battery and fuses. Remove the cab floor panels, kick plates and tip the seat back to reveal the starter, alternator, fuses, control module and control valve. A left-side front panel reveals the control pattern selector and the left-side rear panel is a handy lockable toolbox for operator necessities. The Mustang 550Z zero-tail-swing compact excavator is positioned in the North American market to meet the needs of construction, utilities, telecommunication, landscaping and rental. Mustang zero-tail-swing compact excavators excel in applications such as grading and excavating, trenching, digging, demolition and recycling, cabling and light utility construction. Their compact nature and zero-tail-swing

PENNSYLVANIA

EAGLE POWER & EQUIPMENT CORP. 953 Bethlehem Pike PO Box 425 Montgomeryville, 18936 215/699-5871 Uwchlan 610/458-7054

GROFF TRACTOR & EQUIPMENT INC Mechanicsburg 717/766-7671 Ephrata 717/738-0220 State College 814/353-8400 New Stanton 724/755-0124 Cranberry Township 724/898-1535 Ebensburg 814/472-7300

MEDICO INDUSTRIES, INC. 1500 Highway 315 • Wilkes-Barre 18702 800/633-0027 3647 Shafer’s Schoolhouse Rd. Stroud Township 18360 570/420-0877 NEW JERSEY

BINDER MACHINERY CO. 2820 Hamilton Blvd. • South Plainfield 07080 908/561-9000 The 550Z is equipped with a 47.6 hp (35.5 kW) Yanmar Tier IV-certified, turbocharged diesel engine, which features an electronic throttle for precise control.

201 North Route 73 • Winslow Township 08095 856/767-5900

design make them ideal in situations where space is limited. “The new 550Z zero-tail-swing excavator from Mustang provides operators with additional dig depth and power without sacrificing economical fuel consumption,” said Nathan Ryan, product manager of Mustang compact excavators. “Its electronically-controlled Tier IV emissions-certified Yanmar engine has fuel conserving features that result in up to 20 percent fuel savings. The 550Z comes standard with the features our customers enjoy on the rest of the line-up, including proportional auxiliary hydraulic controls, digital display, PowerA-Tach and control pattern selection valve. Optional features include a time-saving angle dozer blade and a factoryinstalled hydraulic thumb, which is an extremely useful feature for landscaping and demolition.” For more information, visit www.mustangmfg.com.

NEW HAMPSHIRE

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CHAPPELL TRACTOR SALES 454 Route 13 South Milford, 03055 603/673-2640 Fax 603/672-0019 www.chappelltractor.com

Construction Equipment Guide • Mini & Compact Section • www.constructionequipmentguide.com • December 30, 2015 • Page 85

EXPERIENCE EX PERIENCE T THE HE D DIFFERENCE IFFERENCE Takeuchi offers Takeuchi offers the the m most ost iinnovative nnovative a and nd a advanced dvanced li line ne o off c compact ompac t e equipment q u i p m e nt o on n tthe he p planet. lanet. C Come ome a and nd ssee ee w what hat e everyone veryone e else lse iiss ttalking alking a about. bout. E Experience xperience T Ta Takeuchi akeuchi — Visit V isit your your local local dealer dealer ttoday. oday.

DELAWARE

MARYLAND

DELAWARE B F G U

NEW YORK

(800) 737-0049 (800) 218-9462 (800) 951-2550 (800) 756-9433

FOLCOMER EQUIPMENT CORP. 12420 Sussex Highway Greenwood, 19950 800/756-9433

B F G U

EAGLE POWER AND EQUIPMENT 2211 DuPont Highway (Rt.13) New Castle, 19720 302/652-3028

(800) 737-0049 (800) 218-9462 (800) 951-2550 (800) 756-9433 (800) CASE-580

FOLCOMER EQUIPMENT CORP 629 S. Phila. Blvd Aberdeen, 21001 410/575-6580 4 S

Upper Marlboro, 20772 301/627-3938 Baltimore, 21227 410/247-7454 Frederick, 21704 301/682-4441 ‘ 0 hours………………..…..$ S

ALL ISLAND EQUIPMENT 39 Jersey Street • West Babylon 11704 631/643-2605 • Fax 631/643-4060 www.allislandequipment.com

FIND F IND O OUT UT W WHAT H AT O OTHERS TH ERS K KNOW. N OW. V VISIT I S IT T TAKEUCHI-US.COM AKEUCHI - US .COM TO TO FIND F I N D THE T H E DEALER D E A L E R NEAREST N E A R E S T YOU. YO U .

Page 86 • December 30, 2015 • www.constructionequipmentguide.com • Mini & Compact Section • Construction Equipment Guide

JCB’s Compact Backhoe Delivers Big Machine Performance JCB launched its 3CX compact backhoe loader, delivering big machine performance for confined job sites. A pioneer of the compact backhoe loader, with its 2CX (not currently available in North America), JCB is taking the concept to a new level, to meet the demands of tomorrow’s construction sites. The 3CX compact is well-suited for the utility, cemetery and municipal markets and ideal for use on construction projects in urban areas with space constraints, according to the manufacturer. Key features include: • Compact dimensions — just 6 ft. 3 in. (1.9 m) wide and 9 ft. (2.7 m) high, for maximum maneuverability • Rapid travel — 25 mph (40 kmh) hydrostatic transmission • Total control — pilot controls and smooth hydraulics deliver 19 percent more flow • Maximum maneuverability — 4 wheel steering provides a 19 ft. turning radius • Highly versatile — a choice of 2CX and skid steer hitches plus an excavator quick-hitch “With the 3CX compact, JCB has combined over 60 years of backhoe loader expertise and market leadership into a machine that delivers all of the versatility, productivity and ease-of-use of our market-leading 3CX compact, with even more maneuverable dimensions,” said JCB Chief Innovation and Growth Officer Tim Burnhope. “Its small footprint and incredible all-around visibility are perfect for working in congested urban areas. It is easy and intuitive to use, has great mobility and maneuverability, and with pilot controls, will suit operators of both backhoes and excavators. “With the 3CX compact, we are delivering a master of all trades, a machine that is suitable for operation in road maintenance, urban construction, utility work, or any task that requires maximum performance in a compact package,” said Burnhope. Maximum Versatility The 3CX compact combines the digging power and ease-of-use of a compact excavator, with the capabilities of a compact wheel loader, yet it is far more than simply a digging and loading machine.

The 3CX compact combines the digging power and ease-of-use of a compact excavator, with the capabilities of a compact wheel loader.

Backhoe loader, compact excavator and skid steer loader attachment compatibility allows the 3CX compact to work with a widerange of attachments and handheld tools, for maximum versatility and utilization. A 19 percent increase in hydraulic flow, at 26 gpm (98 Lpm), in combination with standard excavator pilot controls, gives the 3CX compact increased controllability for operators familiar with both compact excavators and backhoe loaders. Up to 20 gpm (75.7 Lpm) of bi-directional auxiliary flow allows a wide range of hydraulic attachments to be used, including augers, increasing the versatility and productivity of the backhoe. The 3CX compact is available with two fixed or extended dipper lengths at the rear. At the front end, the loader comes with a range of buckets that can be supplied with optional cutting edge for road stripping applications. A load over height of 9 ft. 9 in. (3 m) and max forward reach at full height of 3 ft. 8 in. (1 m) allows easy loading of trucks and other high-sided vehicles. The machine also can be ordered with a hydraulic quickhitch, for faster attachment changes. The six-in-one bucket makes the

3CX compact the ideal machine for a host of jobs on site. Pallet forks and specialty attachments, such as sweepers, add to the machine’s versatility. Low Emission Driveline The 3CX compact is powered by a low emission Tier IV Final JCB Diesel by Kohler engine, delivering 74 hp. This highly efficient engine meets both U.S. and European emissions standards without the need for a costly diesel particulate filter (DPF) or any exhaust after-treatment or exhaust fluid. The engine drives through a three-speed hydrostatic transmission to all four wheels, for maximum traction across difficult site conditions. The hydrostatic transmission offers a 25 mph top speed for travel between sites. The transmission also features a creep mode, which allows the operator to run at high engine rpms to power high-flow attachments such as road planers, with a maximum travel speed of just 2 mph. The hydrostatic transmission eliminates the need for a gearshift lever or a clutch, ensuring maximum ease-of-use. Heavy-duty JCB axles with an optional limited slip differential helps reduce wheel slip

in tough conditions. An intelligent braking system disengages the transmission to increase efficiency and reduce component wear. Riding on equal-sized wheels, the 3CX compact has selectable two- and four-wheel steering. A turning radius of 19 ft. (6.7 m) to the outside of the wheels with brakes engaged and 22 ft. without brakes makes the machine highly maneuverable and easy-to-operate on tight urban job sites, according to the manufacturer. Optional bucket and stabilizer street pads are available to prevent damage to roadways. In combination with a hand-held hydraulic tool circuit and a host of high power attachments, such as breakers and patch planers, the 3CX compact is an ideal machine for road maintenance. Parallel lift loader arms ensure maximum load retention and JCB’s smooth ride loader suspension system (SRS) is standard, improving comfort for the operator while limiting spill from the front bucket. Operator Comfort Pilot controls are standard on the 3CX compact, reducing operator effort and increasing controllability. The comfortable operator’s cab provides plenty of storage capacity

with easy-to-reach gear selector. The operator benefits from a fully adjustable suspension seat and can adjust temperature inside the cab through the heater and optional air conditioning system. The hood design is slim, providing maximum visibility for the operator. A laminated front screen, reinforced glass and rear window protection improves safety. Flat glass permits simple replacement of broken windows. Two front and four rear halogen work lights deliver maximum worksite visibility. Optional LED lights with boom-mounted lights are available for all around night operation visibility. LiveLink Support The 3CX compact is supplied as standard with JCB’s LiveLink telematic tracking and monitoring system. LiveLink permits the owner to monitor the machine’s performance. In addition, LiveLink allows real-time tracking to permit rapid relocation in the event of machine theft. For more information, visit www.jcbna.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Mini & Compact Section • www.constructionequipmentguide.com • December 30, 2015 • Page 87

F&W EQUIPMENT www.fwequip.com 164 Boston Post Road Orange, CT 06477 203-795-0591

ADMAR SUPPLY www.admarsupply.com 800-836-2367 449 Commerce Rd. Vestal, NY 13850 607-798-0333 1394 Military Rd. Buffalo, NY 14217 716-873-8000 2390 Rochester Rd. Canandaigua, NY 14424 585-396-0031 1950 Brighton-Henrietta Town Line Rd. Rochester, NY 14623 585-272-9390

Reliable. Durable. Muscle-bound. The Kubota SVL Compact Track Loaders are model employees. And models of engineering. Featuring proven Kubota engines, best-in-class breakout force and a smooth ride, they show up ready to work, day in and day out.

ERB & HENRY EQUIP. INC. www.erbhenry.com 22-26 Henry Ave. New Berlinville, PA 19545 610-367-2169

Kubota.com/Construction

7800 Brewerton Rd. Cicero, NY 13039 315-433-5000

CHAPPELL TRACTOR SALES www.chappelltractor.com 454 Route 13 South P.O. Box 424 Milford, NH 03055 603-673-2640 Fax: 603-672-0019

BYRD TRACTOR, INC. BYRD TRACTOR, INC. www.byrdtractorinc.com 7274 Centreville Rd. Manassas, VA 20111 703-361-2135 Fax: 703-361-4804

6014 Drott Drive E. Syracuse, NY 13057 315-433-5000

HARTER EQUIPMENT, INC. 615 State Route 33 Millstone Twp, NJ 08535 732-446-7600 866-379-6326 Fax: 732-446-9255 ABLE Equipment Rental Kubota Sales & Rentals 1050 Grand Blvd. Deer Park, NY 11729 866-468-2666 631-841-3333 www.ableequipment.com

Page 88 • December 30, 2015 • www.constructionequipmentguide.com • Mini & Compact Section • Construction Equipment Guide

Case Introduces TR340, TV380 Compact Track Loaders Case Construction Equipment has introduces the new TR340 and TV380 compact track loaders (CTLs): the first Tier IV Final CTLs outfitted with selective catalytic reduction (SCR) technology. The TR340 rounds out the Case lineup of large-frame CTLs, now providing customers with both a radial-lift (TR340) and vertical-lift (TV380) design to choose from in the larger footprint. This combination of size, strength and flotation is ideal in earthmoving applications that require low ground pressure/minimal ground disturbance. The new Tier IV Final models feature best-in-class torque, breakout force and standard auxiliary hydraulic flow, as well as the industry’s widest cab with best-in-class 360-degree visibility, according to the manufacturer. The Case SCR solution is provided by Fiat Powertrain Technologies (a CNH Industrial company) and has proven itself in on-road trucking, heavy earthmoving and agricultural applications. The technology is now being outfitted to benefit smaller engine ranges, including CTLs. “The SCR solution is easy and relatively hands-off — operators who remember to top off their DEF tank while refueling will notice no other day-to-day changes,” said Warren Anderson, brand marketing manager, Case Construction Equipment. “There is no diesel particulate filter [DPF] to maintain or replace, and SCR allows for a more efficient use of fuel as all diesel is consumed in productive effort instead of regeneration.” The new radial-lift TR340 weighs 10,000 lbs. (4,536 kg) with a rated operating capacity (ROC) of 3,400 lbs. (1,542 kg) and a bucket breakout force of 8,700 lbs. The verticallift TV380 weighs 10,550 lbs. (4,785 kg), provides 7,510 lbs. of bucket breakout force and an ROC of 3,800 lbs. (1,723 kg). Both machines are rated at 90 gross hp, produce 282 ft./lbs. of torque and increase hydraulic flow rates (standard: 24.2 gpm [91.6 Lpm]; high-flow: 37.6 gpm 142 Lpm]). The 25.5gal. (96.5 Lpm) fuel tank extends runtimes and ensures that the machine works the entire day without refueling. SCR: Easy, Efficient Tier IV Final SCR is an after-treatment system that lowers exhaust temperatures and does not use fuel to burn off particulate matter — great for fuel savings compared to solutions with DPFs. SCR technology is more efficient and requires less maintenance than DPFs, as it does not require filter replacement or upkeep. It also removes complexity for operators and maintenance staff by eliminating regeneration associated with DPFs. Heavy-Duty Features Case offers new heavy-duty features on each model as standard equipment. This

The TR340 rounds out the Case lineup of large-frame CTLs, now providing customers with both a radial-lift (TR340) and vertical-lift (TV380) design to choose from in the larger footprint.

includes a heavy-duty 950 CCA battery for consistent starts in cold weather, a more robust rear door for added protection, standard front and side lighting for working all hours of the day, a block heater and an easyaccess remote jump-start. These features add strength and reliability in all working conditions. EZ-EH Controls Allow Flexibility The TR340 and TV380 offer an EZ-EH (electro-hydraulic) setup menu with nine adjustable speed and control sensitivity settings that can be adjusted effortlessly as applications change. This allows the operator to match controls to their preference for comfort and greater productivity. A single rocker switch alternates between the Case “H” operating pattern and ISO pattern controls for operators who are comfortable with one style or the other. New operator handles with detents improve controllability and feathering by providing greater responsiveness to the actions/movement of the machine, according to the manufacturer.

Undercarriage Offers Stability and Performance All Case Alpha Series compact track loaders feature a dozer-style undercarriage, designed for stability on steep slopes and excellent performance in muddy and sandy terrain. The rigid track frame features fewer moving parts than suspension track systems, making it more durable and easier to maintain. The new CTLs feature triple flange rollers, which help prevent de-tracking on inclines by using dozer-style rollers with a larger inner-diameter flange positioned between the track lugs. Comfort for the Operator The TR340 and TV380 offer one of the largest cabs in the industry at nearly 3-ft. (.9 m) wide. It features an enclosed, fully sealed cab pressurized against noise and dust, and the industry’s lowest entry threshold for easy access in and out of the cab. The cab-forward design provides 360-degree visibility with excellent site lines down to the bucket edge, curb lines and to the rear of the

machine. Features that further improve visibility include standard heavy-duty front and side lights, a skylight, ultra-narrow wire side screens, and a large and curved rear window. Maintenance Made Easy Routine service points are all located at the rear of each machine, so operators can quickly access the engine, filters and fill points. The battery is now housed behind its own side-entry panel at the rear of the machine for easy access and service. Both machines feature Case’s easy-tilt cab for convenient access to the drivetrain compartment. Hydraulic quick couplers allow operators to quickly change attachments from the cab, while connect under pressure (CUP) manifolds require no tools to connect or disconnect hydraulic lines. For more information, visit CaseCE.com/alpha. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Mini & Compact Section • www.constructionequipmentguide.com • December 30, 2015 • Page 89

Tackle any challenge with the innovative PowerBoom on JCB Skid Steers. Step in and take control. This revolutionary single-armed machine powers through every job while giving operators the best visibility available and safer side-door entry. This year, JCB is celebrating 70 nZVgh ^c i]Z equipment business. To commemorate this milestone anniversary, we are offering industry leading finance offers including 0% ths on select products from the JCB range. for up to 70 months Go to jcbna.com/0for70 to learn more.

*Offer valid until December 31, 2015 on select new JCB Skid Steers and Compact Track LdVders at participating JCB dealers. Offer may change without prior notice, and additional terms and conditions may apply. Subject to JCB Finance approval. See a participating JCB dealer for full details.

CONTACT YOUR JCB DEALER FOR MORE INFORMATION. Earthborne JCB 35 Easton Rd. Warrington, PA 18976 215/343-2000 w w w.earthborneinc.com

Walsh JCB 796 Unionville Rd. Prospect, PA 16052 724/865-9221 2350 Munster Rd. Lilly, PA 15946 814/886-5191 w w w.w alshequipmentjcb.com

Farm-Rite, Inc. 122 Old Cohansey Rd. Shiloh, NJ 08353 800/752-6373 3853 Middle Country Rd. Calverton, NY 11933 631/284-3127 w w w.farm-rite.com

MH JCB 126 Lakeview Dr. Charleston, WV 25313 304/776-6900 w w w.mhjcb.com

Liftech JCB 6847 Ellicott Dr. E. Syracuse, NY 13057 315/463-7333 4381 Walden Ave. Lancaster, NY 14086 716/684-9040

2820 Curry Rd. Schenectady, NY 12303 518/356-5932

Stephenson JCB 7201 Paxton St. Harrisburg, PA 17111 800/325-6455

Valley JCB 1109 Middle River Rd. Baltimore, MD 21237 800/633-5077

9 Belden Rd. Bloomfield, CT 860/243-9723

135 Lincoln Ave. Prospect Park, PA 19076 800/220-4033

20332 Leitersburg Pike Hagerstown, MD 21742 800/336-7414

241 Paul Rd. Rochester, NY 14624 585/328-6380

33B Commerce Ave. S. Burlington, VT 802/864-0308 www.liftechequipmentjcb.com

137 Armstrong Rd. Pittston, PA 18640 866/667-6756 w w w.stephenson equipmentjcb.com

8192 Euclid Court Manassas Park, VA 20111 800/300-5579 w w w.valleyjcb.com

Northland JCB 6 Jonspin Road Wilmington, MA 01887-1057 800/225-7956 978/658-5900 Fax: 978/658-8837 230 Cherry Street Shrewsbury, MA 01545 800/698-8517 508/842-3880 Fax: 508/842-4404

3 Chalet Rd. (Route 44) Middleboro, MA 800/489-8000 781/341-0321 Fax: 781/645-1315 23 Foss Road Lewiston, ME 04240 800/640-6050 207/784-1501 Fax: 207/777-5503 44 Locke Road Concord, NH 03301 877/767-0655 603/717-0390 Fax: 603/717-7035

Edward Ehrbar, Inc. 4 Executive Plaza Yonkers, NY 10701 914/738-5100 Fax: 914/738-6847 42 Kenosia Ave Danbury, CT 06810 203/743-0088 601 Coates Avenue Holbrook, NY 11741 631/563-7600 w w w.ehrbar.com

A. Montano Company 571 Route 212 Saugerties, NY 12477 845/247-0206 w w w.amontanoco.com

Page 90 • December 30, 2015 • www.constructionequipmentguide.com • Mini & Compact Section • Construction Equipment Guide

Terex R265T Compact Track Loader Boasts Narrow Width

Authorized Bobc at Dealer s

CO CONNECTICUT NNECTICUT Bobcat of Connecticut

Boasting a narrow machine width (70-in. [178 cm]), the R265T radial lift path compact track loader can easily maneuver and operate in confined or congested work sites, making it an ideal loader for rental stores and contractors working in site preparation, construction, landscaping, infrastructure development and demolition applications.

East Har tford 860-282-2648 • 877-864-2094 w w w.bobcatct.com

Garden State Bobcat Freehold 732-780-6880 w w w.newjerseybobcat.com

Bobcat of Stratford

NEW N EW YYORK ORK

Stratford

Bobcat of Saratoga

203-380-2300

Gansevoor t

w w w.bobcatct.com

518-798-9283 • 877-461-5065 w w w.bobcatofsaratoga.com

DELAWARE DELAW WARE Bobcat of Sussex County

Robert H. Finke & Sons, Inc. Selkirk

Delmar

518-767-9331

302-846-3355

w w w.finkeequipment.com

w w w.bobcatsc.com

MARYLAND M ARYLAND Metro Bobcat, Inc. Eldersburg

Summit Handling Systems Walden 845-569-8195 w w w.summitbobcat.com

410-795-1500 • 8 66-533-0543

Featuring a 74-hp Tier IV final diesel engine with variable flow hydraulics for powerful productivity and quick cycle times, the 2,650-lb. rated operating capacity Terex R265T compact track loader is the newest member of the Terex Generation 2 (GEN2) loader line-up. Boasting a narrow machine width (70-in. [178 cm]), the R265T radial lift path compact track loader can easily maneuver and operate in confined or congested work sites, making it an ideal loader for rental stores and contractors working in site preparation, construction, landscaping, infrastructure development and demolition applications. Its purpose-built chassis is designed to be a heavy-duty machine within a compact package. Proving it has the power and productivity to get the job done, the R265T loader has 221 ft.-lb. of peak torque, a tipping load of 7,571 lb. (3,434 kg), a bucket breakout force of 5,800 lb. and a lift height of 125 in. (317.5 cm), enabling it to get loading, picking and carrying, grading, back dragging or snow removal jobs done faster and more efficiently. Compact track loaders, like the R265T unit, engineered with a radial lift path — meaning the loader arms raise in an arc pattern — excel at digging and grading applications. Another benefit of the radial lift path configuration is the visibility around the unit it provides to operators, especially when working around existing infrastructure, such as homes and in backyards. The Terex R265T compact track loader comes standard with 18-in. (45.7 cm) wide tracks and Posi-Track undercarriage technology with multiple levels of suspension that

distributes the machine’s 9,180-lb. (4,164 kg) operating weight down to only 3.6 psi of ground pressure. The low ground pressure prevents damage to the ground below (e.g. turf) and provides extended track life. For ride comfort and traction, this loader’s undercarriage is suspended from the chassis of the machine by torsion axles. These torsion axles are independent, so there are multiple levels of suspension points connecting the chassis to the undercarriage. This design allows the bogie wheels on the Terex R265T compact track loader to flex, creating a smooth ride and taking away much of the vibration and shock associated with running over rocks, curbs and other rough terrain. This model also is available with optional 20-in. (51 cm) tracks for increased versatility to keep operators working year-round, even in wet, muddy or snowy conditions. GEN2 compact track loaders, including the R265T model, utilize a proprietary allrubber track, rather than a rigid track technology with steel embedded tracks mounted on an existing skid steer chassis. With this system, these compact track loaders achieve more traction, higher flotation and better operating comfort so operators can make full use of the machine’s higher travel speeds. By utilizing composite materials rather than a steel skeleton, Terex tracks do not corrode or rust, according to the manufacturer. For more information, visit www.terex.com/construction. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Forest ville

PENNSYLVANIA PE NNSYLVANIA

301-568-1104

Bobcat of Lancaster

Gaithersburg

Lancaster

301-840-9300

717-859-4646 • 888-791-6899 w w w.lancasterofpa.com

White Marsh 410-483-0600 w w w.metrobobcat.com

Highway Equipment & Supply Co.

MASSACHUSETTS MASSACHUSETTS

570-788-1127

Bobcat of Greater Springfield

w w w.hw yequip.com

Drums

West Springfield 413-746-4647 w w w.bobcatct.com

Marshall Machinery, Inc. Honesdale 570-729-7117

NEW NEW HAMPSHIRE HAMPSHIRE Bobcat of New Hampshire Chichester 603-224-1234 • 877-852-9316

Hudson

w w w.marshall-machiner y.com

Reading Tractor & Equipment Leespor t 610-926-2441 • 888-835-6429 w w w.readingtractor.com

603-579-9955 • 877-601-7973 w w w.bobcatnh.com

NEW JERSEY N EW JE RSEY

R RHODE HODE IISLAND SLAND Bobcat of Rhode Island War wick

Bobcat of Central Jersey

401-921-4300

Green Brook

w w w.bobcatct.com

732-752-0002 w w w.newjerseybobcat.com

Bobcat of North Jersey Totowa 973-774-9500 • 877-9-BOBCAT w w w.njbobcat.com Bobc at ® and the Bobc at logo are registered trademarks of Bobc at C o m p a n y in t h e U ni t e d S t a t e s a n d v a r io u s o t h e r c o u n t r ie s . © 2 0 16 B o b c a t C o m p a n y. A ll R ig h t s R e s e r v e d . | 1115 510

Construction Equipment Guide • Mini & Compact Section • www.constructionequipmentguide.com • December 30, 2015 • Page 91

GOT A BEAST OF A JOB?

C NTROL THE CHAOS. CO New, improved and battle-tested, Selectable Joystick Controls (SJC) delivers a low-effor t, high-per formance at tack by tailoring loader per formance to difficult jobs.

SEE HOW SJC CAN CHANGE YOUR PLAN OF A AT T TACK. Visit B Bobcat.com/Option11 obcat.com/Option11 Bobcat ® and the Bobcat logo are registered trademarks of Bobcat Company in the United States and various oth ©2016 Bobcat Company. All Rights Reser ved. | 1115510

Page 92 • December 30, 2015 • www.constructionequipmentguide.com • Mini & Compact Section • Construction Equipment Guide

How to Select the Proper Earth Drill By Mike Hale SPECIAL TO CEG

Install a fence. Plant trees. Put in a new yard sign. Different projects with one common link — each requires the proper hole to be drilled in order to complete the task properly. While all hole drilling projects may appear to be the same on the surface, it’s often what’s below the surface that really matters. Whether the project calls for several, identical holes in grass-covered loam, or a single, large hole in rocky soil, there are drills that allow landscaping contractors to complete projects efficiently and safely. There are typically two common styles of engine-powered, one-man earth drills: hydraulic and mechanical. While often similar in appearance, these two styles operate differently and are built with distinct features and options to make them better-suited for certain projects. Hydraulic drills tackle the most challenging soils, including frozen ground and rocky soil, because of their rugged bodies and powerful torque. Their pre-

cise operations at a low speed and high torque allow them to drill accurately in even the most difficult applications. Additionally, hydraulic drills typically have a reverse auger function that safely removes the auger if it becomes lodged under a rock or tree root. And operators can use large-diameter augers with hydraulic drills, making them ideal for single-hole projects such as installing signs and planting trees. Mechanical drills are compact, lightweight and pack a powerful punch. These transmission-powered units feature high-speed auger rotations to quickly drill clean holes. These drills are best suited for use with small-diameter augers and, due to their high speed, are ideal for projects calling for several, narrow holes, such as fitting fence and deck posts and planting decorative plants. Based on the required hole diameter, the right size auger can easily be paired with the selected drill, and most manufacturers will offer several options, from a 1.5-in. (3.8 cm) diameter auger that is used for applications like soil nursery work, up to a 16-in. (40.6 cm)

diameter auger used commonly for repairing foundations. In addition to efficiency, landscaping contractors need drills that require minimal maintenance and adjustments. One feature that can help with this is a snap-on auger, which makes the change-out process quick and easy and eliminates the need for extra tools due to its snap button connection. And, snap-on auger extensions allow the operator to achieve various digging depths without requiring additional augers, adding versatility and saving money. Due to the advancements in drill designs, landscaping contractors tackle projects with efficient earth drills instead of their shovels and strong backs. And taking the time to learn about the differences in drill styles ensures the success of several aspects of a quality parks and recreation project. For more information, call 800/227Hydraulic and mechanical earth drills look similar, 7515 or visit www.littlebeaver.com. but excel in different landscaping applications. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Hydraulic drills are best suited for installing signs and planting trees, and mechanical drills are ideal for fitting fence and deck posts and planting small decorative plants.

Takeuchi Updates Compact Excavator Lineup With TB210R

Upgrades to the TB210R include pilot-operated joystick controls with an ISO/SAE control pattern change valve, selector valve and pilot accumulator.

Takeuchi-US has updated its compact excavator lineup with the introduction of the TB210R. The Takeuchi TB210R has many new features that enhance performance, durability and serviceability. One of the key features is the minimal tail swing design. Couple that with a retractable undercarriage, a backfill blade that can go from 40.2 in. wide down to 29.5 in. (102 to 75 cm) wide and a new foldable ROPS/TOPS canopy that can reduce the machine’s overall height, and you have a machine that can gain access to and work in some of the most confined applications, according to the manufacturer. Upgrades to the TB210R include pilot-operated joystick controls with an ISO/SAE control pattern change valve, selector valve and pilot accumulator. Pilot controls deliver excellent fine control and responsiveness for greater productivity and reduced operator fatigue, while the addition of the ISO/SAE pattern change valve allows the operator to choose a preferred operational pattern. To enhance attachment versatility, the TB210R features a selector valve for one-way

and two-way auxiliary hydraulic flow, and the new pilot accumulator enables the operator to easily remove residual pressure from the auxiliary lines. A Kubota D722-E4B three-cylinder engine powers the TB210R and delivers nearly 22 percent more horsepower than its predecessor, the TB108. The engine oil filter and dipstick are easily accessed through a lockable access panel located below the operator’s seat. A lockable swingout panel on the left side of the machine provides access to the fuel fill and sight gauge, fuel filter with shut-off, and the dual-element air cleaner. In addition, the rear engine hood opens overhead, providing access to the hydraulic tank and sight gauge, battery, coolant reserve tank, pattern change valve and one-way flow selector valve. The TB210R features a two-year, 2,000-hour warranty. For more information, visit www.takeuchi-us.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Mini & Compact Section • www.constructionequipmentguide.com • December 30, 2015 • Page 93

G E N U I N E

™ P A R T S

DEMO ONE TODAY AT: MIDLANTIC MACHINERY www.midlanticmachinery.com 2240 Bethlehem Pike 6 S. Eleanor Ave. Hatfield, PA 19440 Frackville, PA 17931 215/822-0145 570/874-6140 Fax: 215/822-7971 Fax: 570/874-4200

ADMAR SUPPLY COMPANY, INC. sales@admarsupply.com www.admarsupply.com Latham, NY 12110 Rochester, NY 14623 518/690-0750 585/272-9390 Fax: 518/690-0757 Fax: 585/272-9165 1-888/613-1302 1-800/836-2367

6375 Allentown Blvd. Harrisburg, PA 17112 717/652-3190 Fax: 717/540-0251

1400 Joh Avenue Baltimore, MD 21227 410/247-2100 Fax: 443/543-0344

Vestal, NY 13850 607/798-0333 Fax: 607/798-0833 1-866/390-2367

1261 Highway 315 Wilkes Barre, PA 18702 570/824-9891 Fax: 570/822-3561

28587 Sussex Hwy. Laurel, DE 19956 302/715-5382 Fax: 302/715-5384

Buffalo, NY 14217 716/873-8000 Fax: 716/873-8455 1-800/353-2367

E. Syracuse, NY 13057 315/433-5000 Fax: 315/431-0548 1-800/293-2367

NORRIS SALES COMPANY www.NorrisSales.com 1010 Conshohocken Rd. Conshohocken, PA 19428 610/279-5777 Fax: 610/279-7973 1-800/457-RENT (7368) 668 Berlin Cross Keys Road Sicklerville, NJ 08081 856/740-1400 Fax: 856/740-1940 866/80-TOOLS (86657)

ALL ISLAND EQUIPMENT www.allislandequipment.com 39 Jersey Street West Babylon, NY 11704 631-643-2605 Fax: 631-643-4060

Page 94 • December 30, 2015 • www.constructionequipmentguide.com • Mini & Compact Section • Construction Equipment Guide

Ditch Witch SK752 Mini-Skid Steer Features Added Capacity

Work More Places Get More Done ASV’s new RT-75 Compact Track Loader and RS-75 Skid Steer Loader let you work in more places and get more done than other machines in their class. Legendary ASV traction systems make it easy to work productively in the widest range of conditions. They also have the fastest travel speeds available. Industry-leading ground clearance keeps you moving where other machines can’t work at all. And powerful auxiliary hydraulic systems tackle the toughest jobs all day long.

Months! 0 6 r o f t s 0% Intere ranty! r a W H / T P 36-Month e Offer

Limited Tim

web: www.asvllc.com email: sales@asvllc.com toll free: 1-800-205-9913

The SK752 mini skid steer accepts dozens of quick-connect attachments so operators can tackle multiple tasks on the job site, from utility, landscaping and underground construction work to plumbing projects.

Ditch Witch, a Charles Machine Works Company, expands its line of compact equipment with the construction-grade SK752 mini-skid steer with improved features that enable added confidence, productivity and versatility on the job, according to the manufacturer. “Landscapers, contractors and renters alike will benefit from the SK752 mini-skid steer. They’ll find the machine has all the power and functionality needed for small or midsize projects,” said Andrew Schuermann, product manager, compact equipment, of the Ditch Witch organization. “It’s a compact tool carrier that accepts dozens of quick-connect attachments so operators can tackle multiple tasks on the job site, from utility, landscaping and underground construction work to plumbing projects.” With its 24.8-hp (18.5 kW) Kubota diesel engine — known for efficiency and lowmaintenance — the machine wields impressive power for all machine functions. It also directs more power to the attachment than comparable models on the market, helping operators get the job done faster, according

to the manufacturer. Operators will gain nearly 10 percent more operating capacity with the new skid steer over similar models. The machine has an 860-lb. (390 kg) operating capacity and increased hinge-pin height to 83 in. (211 cm) for more efficient loading. The SK752 mini-skid steer features an ergonomic operator’s station with standard dual-lever ground drive controls and an optional joystick. The machine’s large platform measures 74 sq. in., with enhanced ground clearance that lets drivers work comfortably while maintaining good worksite visibility. At the operator’s station, drivers stay in control with the two-way auxiliary control foot pedal. It lets operators maintain hydraulic flow to the attachment while keeping their hands free to control depth and ground speed. For more information, visit www.ditchwitch.com/mini-skid-steer/mini-skidsteer/sk752. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Mini & Compact Section • www.constructionequipmentguide.com • December 30, 2015 • Page 95

JESCO, INC. 118 St. Nicholas Ave. South Plainfield, NJ 08070 908/753-8080 1790 Route 38 Lumberton, NJ 609/267-2020 1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080 Fax: 973/575-5553 Middletown, DE 302/376-0784

Baltimore, MD 410/687-1700 Delmar, MD 410/546-1090 Frederick, MD 301/874-5500 White Plains, MD 301/870-1438 495 Fishkill Avenue Beacon, NY 12508 845/831-1800 800/724-0725 Fax: 908/821-1671 110 East Jefryn Blvd. Deer Park, NY 11729 844/482-0910

LESLIE EQUIPMENT COMPANY 6248 Webster Road Cowen, WV 26206 304/226-3299 www.lec1.com 136 Clifftop Drive Beaver, WV 25813 304/255-1525 Rt. 33 West Norton, WV 26285 304/636-6421 19 Goff Crossing Drive Cross Lanes, WV 25313 304/204-1818 Fax: 304/204-1811

2098 Lillian Lane Pleasant Valley (Fairmont), WV 26554 304/534-5454 Fax: 304/534-5888 8331 Meade Springer Rd. Ashland, KY 41101 606/928-3477 Fax: 606/928-6845 195 Industrial Park Drive Pikeville, KY 41501 606/432-0321 Fax: 606/432-5918 105 Tennis Center Drive Marietta, OH 45750 740/373-5255 Fax: 740/373-5570

MURPHY TRACTOR & EQUIPMENT CO. Sioux City, IA 800/352-4693

Kansas City, MO 888/306-3434

Omaha, NE 800/416-5095

Columbus, OH 800/222-2010

Waterloo, IA 800/772-2019

Springfield, MO 888/306-2656

Brunswick, OH 800/716-9796

Lima, OH 800/423-7445

Dodge City, KS 800/794-0172

Gering, NE 800/205-6784

Cambridge, OH 740/439-2747

Poland, OH 866/503-7259

Great Bend, KS 800/264-4056

Grand Island, NE 800/868-4017

Canton, OH 866/235-0438

Vandalia, OH 800/233-4228

Park City, KS 800/262-0139

Lincoln, NE 800/416-5518

Chillicothe, OH 740/663-5300

Cranberry Twp, PA 724/776-3636

Topeka, KS 800/279-6087

North Platte, NE 800/894-7060

Cincinnati, OH 800/844-3734

Delmont, PA 724/837-4500

Ulysses, KS 800/472-9238

THE W.I.CLARK COMPANY 30 Barnes Industrial Park Rd. Wallingford, CT 203/265-6781 www.wiclark.com Brookfield, CT 203/775-1203 Plainfield, CT 860/546-4808

Page 96 • December 30, 2015 • www.constructionequipmentguide.com • Mini & Compact Section • Construction Equipment Guide

0% FINANCING FOR 48 MONTHS* OR

$2,500 OFF COMPACT EXCAVATORS** 1-877-556-4384 HudsonRiverTractorCompany.com

INSTEAD OF JUST HANGING OUT ON SATURDAYS

I HELP KIDS HANG IN THERE

AT SCHOOL BECAUSE I DON’T JUST WEAR THE SHIRT, I LIVE IT. ®

GIVE. ADVOCATE. VOLUNTEER. LIVE UNITED Michael Cleveland is part of United Way’s ongoing work to improve the education, income, and health of our communities. To find out how you can help create opportunities for a better life for all, visit LIVEUNITED.ORG.

McLaren Expands Lineup With NextGen TDF Series

The SpoolRite belting technology used in the NextGen TDF series radically increases the tensile strength of the tracks’ internal structure.

Addressing the technology gap between rubber tracks available for compact track loaders and those available for mini-excavators, McLaren Industries now offers its high-performance NextGen TDF series rubber tracks for mini-excavators. This product release represents the first of its kind to offer increased track strength and durability for mini-excavators. Unlike other jointless cable tracks, the SpoolRite belting technology used in the NextGen TDF series is a proprietary system that radically increases the tensile strength of the tracks’ internal structure. It is a pre-stressed, aligned, non-overlapping continuous belting system, which guarantees equal tension throughout the track belts. This reduces the chance of link ejection and structural damage of the track, and it significantly improves the track strength, according to the manufacturer. McLaren’s NextGen TDF tracks also feature a Crack and Cut Quarantine System (CCQS), a series of narrowly spaced lug bars that contain the growth of any accidental cut or crack. By preventing the spread of the surface damage, CCQS provides a longer service life.

Other standard features include a fourstep metal-to-rubber bonding, proprietary rubber compound formulation, rubber coated wear resistant guiding system, continuous rubber roller pathway and double-offset tread pattern. “When a mini-excavator has to do a hard job, track durability is one of the most critical factors for the undercarriage,” said George Zafirov, marketing manager of McLaren Industries. “Our NextGen TDF series rubber tracks for mini-excavators set a new industry standard for longer track life, maximized return on investment, better ride and performance on harsh terrain.” The NextGen TDF excavator tracks are available for numerous makes and models of mini-excavators in sizes of 300x52.5 and 400x73. They fit popular models such as Bobcat X341, Caterpillar 305 CR, JCB 8060, Volvo EC55 and many more. For more information, call 800/8360040 or visit www.mclarenindustries.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Mini & Compact Section • www.constructionequipmentguide.com • December 30, 2015 • Page 97

Built precisely. Works relentlessly. The world’s No. 1 selling compact excavators* feature zero and conventional tail swing, 20% higher lift and finely tuned Kubota engines. They’re part machine, part masterpiece and all Kubota.

Abele Tractor & Equipment Co., Inc.

Admar Supply Company, Inc. Rochester, NY 14623 www.abeletractor.com 585/272-9390 Vestal, NY 13850 Albany, NY 12205 E. Syracuse, NY 13057 607/798-0333 518/438-4444 315/433-5000 800/836-2367 Cicero, NY 13039 NY 14217 Cherry Valley Tractor Buffalo, 315/433-5000 716/873-8000 www.cherryvalleytractor.com

Marlton, NJ 08053 856/983-0111

www.admarsupply.com

Eagle Power & Equipment Company www.EaglePE.com

Montgomeryville, PA 18936 215/699-5871 Eagle, PA 19480 610/458-7054 East PBE, Inc. Newington, CT 06111 860/665-7470

Erb & Henry F&W Equipment Equip., Inc. www.fwequip.com New Berlinville, PA 19545 Orange, CT 06477 610/367-2169 203/795-0591

Marshall Machinery, Inc. Honesdale, PA 18431 570/729-7117

Farm-Rite Inc. Shiloh, NJ 08353 800/752-6373 856/451-1368 Calverton, NY 11933 631/284-3127

Pine Bush Equipment Co, Inc.

Harter Equipment, Inc Millstone Twp, NJ 08535 732/446-7600 1-888-HARTER-1

www.pbeinc.com

Pine Bush, NY 12566 845/744-2006 Holmes, NY 12531 845/878-4004

Kubota.com/Construction * According to 2013 OEM Off-Highway Research, Kubota has the largest compact excavator market share in the world. © Kubota Tractor Corporation, 2015.

Westchester Tractor Inc.

ABLE Equipment Rental

www.wtractor.com

www.ableequipment.com

Brewster, NY 10509 845/278-7766 Fax: 845/278-4431

Deer Park, NY 11729 866/468-2666 631/841-3333

Chappell Tractor Sales www.chappelltractor.com

454 Route 13 South P.O. Box 424 Milford, NH 03055 603/673-2640 Fax: 603/672-0019

Page 98 • December 30, 2015 • www.constructionequipmentguide.com • Mini & Compact Section • Construction Equipment Guide

Cat 307E2 Mini-Excavator Delivers Superior Performance The Cat 307E2 expands the mini-hydraulic excavator machine range to include an additional solution for the 7.7 to 8.8 ton (7 to 8 t) weight class. The 50.3 hp (37.7kW) Cat C2.4 turbo engine (U.S. EPA Tier IV Final/EU Stage IIIB) and the high definition hydraulic system, which is load sensing and flow sharing, allows the machine to offer superior performance and overall operational effectiveness, according to the manufacturer. The 307E2 offers maximum stability, reach and lift capacity with its standard tail swing and fixed boom design. The cab delivers superior comfort with an air suspension seat, retractable seat belt and COMPASS monitor with color display. The COMPASS monitor allows the operator to quickly enable and modify machine features such as: adjustable auxiliary flow for enhanced work tool control; hydraulic quick coupler selection to change work tool attachments at the touch of a button; auto engine idle for improved fuel effi-

ciency; and security system features to protect equipment on the job site. Additionally the 100 percent pilot controls deliver excellent machine control with fine modulation while eliminating the need for linkage and cable maintenance, lowering owning and operating costs and resulting in less downtime. Secondary auxiliary lines come standard on the 307E2 along with a “thumb ready” stick. Track options will be either steel tracks or steel tracks with pads. Furthermore it shares work tools with the 308E2 platform along with new features including: power on demand, which ensures full time efficiency and power; site reference system, which aids with grading and level trenching; and the rear view camera which decreases blind spots and aids in machine positioning. All these features are standard on the new 307E2.

The Cat 307E2 expands the mini-hydraulic excavator machine range to include an additional solution for the 7.7 to 8.8 ton (7 to 8 t) weight class.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Bobcat’s New T740 Features Non-DPF Diesel Engine the cutting edge and corners of the bucket, according to the manufacturer. Large side and rear windows on the cab provide more visibility to the tires or tracks, as well as the back of the machine. The large top window makes it easier and more comfortable for the operator when performing tasks like loading trucks or tall hoppers.

Bobcat Company has introduced its Tier IV-compliant 700 frame-size compact track loader. The Bobcat T740 is powered by a diesel engine that is less than 75 hp and does not require a diesel particulate filter (DPF), selective catalytic reduction (SCR) or diesel exhaust fluid (DEF). The T740 is a large, powerful machine that works well in construction, landscaping, agriculture, buildings and grounds, and other market segments. This machine joins the M-Series compact loader line and shares features such as improved power and performance, better visibility and improved operator comfort. Unmatched Performance The new T740 is designed to work long hours on demanding job sites. The vertical-lift-path loaders are designed to lift loads higher so it’s easier to clear high-sided truck boxes and hoppers. The hydraulic systems on M-Series loaders also have higher standard flow and pressure, for increased attachment performance. An optional 30.5-gpm high-flow hydraulic option gives T740 operators more attachment power, boosting machine productivity. More than 60 genuine Bobcat attachments are approved for use with the T740. No DPF Needed Bobcat T740 compact track loaders use a diesel oxidation catalyst (DOC) to meet Tier IV emission standards, but without the need for a DPF. The DOC is a special catalyst that reacts with engine exhaust upon contact and transforms combustion byproducts into water and carbon dioxide. The Tier IV-compliant Bobcat non-DPF solution features an ultra-low particulate combustion (ULPC) engine with a

The T740 works well in construction, landscaping, agriculture, buildings and grounds, and other market segments. This machine joins the M-Series compact loader line.

specifically designed engine combustion chamber that significantly reduces the amounts of particulate matter created during combustion — making Tier IV compliance possible without using a DPF. Improved Visibility Like all M-Series compact track loaders, the T740 features a cab-forward design that moves operators closer to the attachment and the work area, plus provides enhanced visibility in all directions. The new loader has a large cab door opening, improving visibility to attachments, particularly to

Best-in-Class Cab The best-in-class pressurized cab includes a one-piece seal that goes all the way around the door and fits into a special curved pocket. This minimizes the amount of dirt and dust that enters the cab, creating better working conditions plus it makes it easier to keep the cab clean. Standard controls with power assist are the base control configuration for the T740. Selectable joystick controls (SJC) are available as an option. Maintenance Made Easy Simple check points and superior loader design elements make it easier to perform maintenance at the proper intervals. Auxiliary quick couplers are mounted directly to the front plate of the lift arm to provide a solid mounting, and hoses are routed through the loader arms for better protection. A guard bar extends in the front of the coupler for added protection and to minimize downtime. The cooling system on the M-Series T740 allows for increased efficiency, is easy-to-clean, increases machine performance and helps prolong the service life of the machine. For more information, visit Bobcat.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Mini & Compact Section • www.constructionequipmentguide.com • December 30, 2015 • Page 99

We Keep Equipment Moving! Call me today, I’ll be glad to help you! ~ Shannon » The #1 Selling Rubber Track Brand In America! » REPLACEMENT UNDERCARRIAGE Bobcat®, Gehl®, Mustang®, Takeuchi®, CAT® 279, 289 & 299

800-365-7260

Order online anytime » depparts.com »

Ashland, VA » Jacksonville, FL » Dallas, TX » Cincinnati, OH » Portland, OR » Sacramento, CA » Schenectady, NY » Leduc, AB

Soft Ride Solid Skid Steer Tires Extra deep lugs for traction Tough rubber compounding

Large in stock inventory Backhoe & loader solids also available

NO ONE CCAN AN GET YOUR EQUIPMENTT BACK K UP AND RUNNING FAS A TER THAN MESSICK’S! WE HA AVE VE HUNDREDS OF THOUSANDS SANDS OF PPAR ARTS IN STO OCK AND READ DON’T WAITT, CALLL US TODAY!

www.advancetires.com • (800) 445-6647 Mention this ad for discounted shipping

800.222.3373 80 0.222.3373 • www www.messicks.com .messicks.com

Page 100 • December 30, 2015 • www.constructionequipmentguide.com • Mini & Compact Section • Construction Equipment Guide

New Holland’s E55BX Mini-Excavator Provides Digging Power, Accessibility

Pump & Power Equipment Corp. 8019 Dorsey Run Rd. Jessup, MD 20794 410-799-1800 Fax: 410-799-1804 www.pumpnpowerequip.com

Key Equipment Sales & Rentals, Inc. 2605 Reach Road Williamsport, PA 17701 570-323-7800 Fax: 570-323-7802 1799 Horseshoe Pike Honey Brook, PA 19344 610-942-0482 Fax: 610-942-9982 2750 Turnpike Industrial Blvd. Middletown, PA 17057 717-370-2039 Fax: 717-370-2084 www.KeyEquipmentInc.com

Ambrose Equipment Co. New Holland Construction’s E55BX short radius mini-excavator provides big digging power with the maneuverability and accessibility of a compact model.

New Holland Construction’s E55BX short radius miniexcavator provides big digging power with the maneuverability and accessibility of a compact model. Built on a short radius platform with minimal tail swing overhang, the E55BX offers high breakout forces, deep dig depth and excellent dozing capability, according to the manufacturer. “If you work in tight areas, and you need straight-out digging performance, the E55BX short radius mini-excavator fits the bill,” said Paul Wade, New Holland Construction product marketing manager. “The E55BX excels at general excavation, site prep, trenching, pipelaying, dozing and backfilling, especially when work space is at a premium.” Integrated Noise and Dust Reduction: Quiet Operation, Easy Maintenance New Holland’s INDR (integrated noise and dust reduction) system makes the E55BX quieter than many compact excavators. The INDR system efficiently manages incoming and outgoing air to attain superior system cooling and maximum particulate filtration while reducing noise emissions by up to 9 dBA, according to the manufacturer. The system not only reduces operating noise and improves air filtration, it also lowers overall operating costs. The INDR filter is installed in front of the radiator for premium air filtration, noise reduction and easy daily maintenance. To clean it, the filter can simply be removed and blown with compressed air. There’s no need for direct cleaning of the radiator.

Fuel Saving Modes The E55BX can be operated in three modes: “L” mode (low idle), “S” mode (fuel-saving mode) and “H” mode (High idle). When operating in “S mode” it achieves a 23 percent reduction in fuel consumption compared to “H” mode operation. Downward Exhaust Due to its compact size, a mini-excavator is often used to work on job sites close to plants and delicate structures that can be damaged by heated exhaust gases. By engaging the “+E” option, heated exhaust gases from the E55BX are discharged downward under the machine instead of beside it. A diffusion muffler is in place so exhaust gas cannot be forcefully released. Optional LCD Monitor An optional LCD monitor displays maintenance management functions, and lets the operator easily see the fuel gauge and water temperature, and alerts the operator as to when engine oil, fuel filter, hydraulic oil filter and hydraulic oil need to be replaced. The operational achievement of the past three months also is displayed on the easy-to-read screen. For more information, visit www.newholland.com/na. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

1401 Hooksett Rd. Hooksett, NH 03106 603-644-8787 1 Madison Street Plainville, MA 02762 508-643-0044 www.ambroseequipment.com

Able Tool & Equipment 410 Burnham Street South Windsor, CT 06074 860-289-2020 www.abletool.net

Construction Equipment Guide • Mini & Compact Section • www.constructionequipmentguide.com • December 30, 2015 • Page 101

Cap Rents Supply, LLC 18-25 43rd Street Astoria, NY 11105 718-932-4100 Fax: 718-932-8971 www.caprents.com

Gamka Sales Co., Inc. 983 New Durham Rd. Edison, NJ 08817 888-248-1400 Fax: 732-248-1445 www.gamka.com

Iron Source Equipment 25113 Dupont Blvd. Georgetown, DE 19947 302-856-7545 Fax: 302-856-7546 www.ironsourcede.com 5722 N. Dupont Hwy. Smyrna, DE 19977 302-653-7562

Norris Sales Company, Inc. 1010 Conshohocken Rd. Conshohocken, PA 19428 610-279-5777 Fax: 610-279-7973 668 Berlin Cross Keys Road Sicklerville, NJ 08081 856-740-1400 www.NorrisSales.com

Central Equipment Company P.O. Box 261 45 Dempsey-Greaves Lane Stillwater, ME 04489 207-827-6193 Fax: 207-827-3774 54 Old Canal Way Gorham, ME www.centralequipmentco.com

Page 102 • December 30, 2015 • www.constructionequipmentguide.com • Mini & Compact Section • Construction Equipment Guide

GET MORE DONE WITH ONE. Why run two machines when one will do? Whether you’re loading trucks, busting up blacktop, placing pipe, digging trenches, or moving materials, an LL--Series Backhoe is more than up to the task. By listening and responding to our customers, these versatile machines feature improved hydraulic systems for additional lift capability and superb multifunction performance. And rugged EPA Final Tier 4/EU Stage IV diesel engines* meet rigid emission regulations, enabling work in nonattainment areas. The result: our most versatile backhoes ever. TTaake advantage of unrivaled capability. *Interim Tier 4/Stage IIIB on the 310L EP

CONNECTICUT

MAINE

NEW JERSEY

NEW YORK

The W.I. Clark Company Wallingford, CT 06492 203/265-6781 Brookfield, CT 06804 203/775-1203 Plainfield, CT 06374 860/546-4808 www.wiclark.com

Nortrax Hermon, ME 207-947-6786 Houlton, ME 207-532-6517 New Canada, ME 207-834-6701 Westbrook, ME 207-773-3777

Jesco, Inc. 118 St. Nicholas Ave. South Plainfield, NJ 07080 908/753-8080 800/241-7070 Fax: 908/753-7853 1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080 Fax: 973/575-5553 1790 Route 38 Lumberton, NJ 08048 609/267-2020 888/217-0600 Fax: 609/261-8559 www.jesco.us/

Five Star Equipment, Inc. Rochester, NY 14624 585/235-3011 Kirkwood, NY 13795 607/775-2006 Orchard Park, NY 14127 716/662-2191 6500 E Taft Road Syracuse, NY 13057 315/452-4560

Nortrax Plattsburgh, NY 518-561-7990 Clifton Park, NY 518-371-5111 Gouverneur, NY 315-287-0703

DELAWARE

Jesco, Inc. Middletown, DE 302/376-0784

MARYLAND

Jesco, Inc. Baltimore, MD 410/687-1700 Delmar, MD 410/546-1090 Frederick, MD 301/874-5500 White Plains, MD 301/870-1438

MASSACHUSETTS Schmidt Equipment, Inc. North Oxford, MA 01537 508/987-8786 North Billerica, MA 01862 978/667-4345 Plymouth, MA 02363 508/830-9997 No. Swansea, MA 02777 508/379-9810 Springfield, MA 01104 413/543-5595 www.schmidtequipment.com

Harter Equipment, Inc. Millstone Twp, NJ 08535 732-446-7600 1-888-HARTER-1

Jesco, Inc. 497 Fishkill Avenue Beacon, NY 12508 845/831-1800 800/724-0725 Fax: 908/821-1671 110 East Jefryn Blvd. Deer Park, NY 11729 844-482-0910

NEW HAMPSHIRE Nortrax Pembroke, NH 603-225-2769

VERMONT Nortrax Springfield, VT 802-885-6840 Williston, VT 802-658-2121 www.nortrax.com

PENNSYLVANIA Five Star Equipment, Inc. 711 Route 199 Athens, PA 18810 570/882-8800 1300 East Dunham Drive Dunmore, PA 18512 570/346-1701 46 Route 97 Waterford, PA 16441 814/796-2663 2585 Lycoming Creek Road Williamsport, PA 17701 570/494-4030 www.fivestarequipment.com

Plasterer Equipment Co., Inc. 2550 E. Cumberland St. Lebanon, PA 717/273-2616 800/225-4001 3215 State Rd. Sellersville, PA 215/258-5700 800/523-2209 400 Stoke Park Rd. Bethlehem, PA 610/867-4657 800/587-9790 640 Lowther Rd. Lewisberry, PA 717/938-6568 866/787-0001 www.plasterer.com

Construction Equipment Guide • Mini & Compact Section • www.constructionequipmentguide.com • December 30, 2015 • Page 103

EDWARD EHRBAR, INC. www.ehrbar.com 4 Executive Plaza Yonkers, NY 10701 914/738-5100 601 Coates Ave. Holbrook, NY 631/563-7600 42 Kenosia Ave. Danbury, CT 203/743-0088

MODERN GROUP LTD. www.moderngroup.com 75 New St. Edison, NJ 08837 732/738-9200 Sicklerville, NJ 856/753-8282 Hasbrouck Heights, NJ 201/288-1441 Bristol, PA 215/943-9100

ALL ISLAND EQUIPMENT www.allislandequipment.com 39 Jersey St. West Babylon, NY 11704 631/643-2605 Fax: 631/643-4060

TRACEY ROAD EQUIPMENT, INC. www.traceyroad.com Syracuse 6803 Manlius Center Road P.O. Box 489 East Syracuse, NY 13057 800/872-2390 Binghamton 1523 Route 11 North Kirkwood, NY 13795 800/370-9488 Watertown 19598 Cady Road Exit 44-Watertown Center Adams Center, NY 13606 888/335-0200 Albany 115 Railroad Ave. Albany, NY 12205 866/740-8853

JERSEY RENTS www.jerseyrents.com 252 Route 9 Bayville, NJ 08721 732/606-1002 Fax: 732/606-0640 2076 Richmond Terrace Staten Island, NY 10302 718/448-3002

Page 104 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Okada Aiyon Board of Directors Elects Neikirk President

:KHUH :RXOG <RX *ULQG" Peterson customers operate their machines in the most demanding work sites in the world! When you are this far out, you need to know that you have the most reliable, toughest machine possible. Alban Tractor Covering Maryland & Delaware (410) 686-7777

Barry Equipment Covering New England & Eastern NY (508) 949-0005

Just one look at a Peterson can show you why we build the most innovative grinders in the market. For thirty years, Peterson’s attention to detail and drive to build the highest quality, highest volume producing machines make a Peterson a sure investment. Want to see what a Peterson Horizontal Grinder can do? Give us a call at 800.269.6520 or visit us at www.petersoncorp.com.

Cleveland Brothers Covering Pennsylvania & West Virginia (814) 237-5132 ext. 5101

Groff Tractor New Jersey, LLC Covering Southern New Jersey (877) 874-2624 www.grofftractor.com

Scan this QR code with your smartphone to learn more about Peterson (you can download a free reader from your phone's app store).

800-269-6520 • www.petersoncorp.com • PO BOX 40490 • Eugene, OR 97404

Tony Neikirk has been elected president of Okada America by the board of directors of Okada Aiyon effective Dec. 1, 2015.

Tony Neikirk has been elected president of Okada America by the board of directors of Okada Aiyon, an associated company in Osaka, Japan, effective Dec. 1, 2015. Neikirk has been associated with the Okada line of products for 25 years and was a founder of Okada America, launched 20 years ago next April 1. His primary office is in Medina, Ohio, while Okada America also has a Portland, Ore., location and is opening a third facility in the Dallas area on Jan. 4, 2016, in Cleburne, Texas. As president, Neikirk is responsible for all Okada operations that reach out to distributors as well as end-user contractors, companies and municipalities throughout the United States, Canada and Mexico. “I have a long-term, warm relationship developed over the years with our loyal customers, and I look forward to a continuation of that mutual success,” said Neikirk, adding that he is pleased to receive his latest recognition from the Okada Aiyon Board of Directors. Okada America is a leading source of new and refurbished high performance hydraulic breakers, demolition shears and crushers, grapples, hydraulic compactors and hydraulic plumbing kits. For information, call 330/239-2666 or visit www.okadaamerica.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 105

The solution for tough scalping jobs

Lokotrack® ST2.8™

New “Metso Certified Used Program” includes Metso Fleet Management Program* and extended warranty coverage *remote monitoring of location, performance, operation/idling, fuel consumption, and alarms….ask your local Metso distributor for details

Lokotrack ST2.8 makes the scalping of sticky recycling material look easy. The high-energy ST2.8 features an aggressive eccentric throw for screening tough feed materials like top soil, demolition waste, and river gravel. In multistage Lokotrack crushing processes, fines removal is easy with a two-way split option. Contact your local Metso distributor today for more details.. www.metso.com/lokotrack

New LT & STs purchased prior to Dec 31, 2015 eligible for free Metso Fleet Management Program* and a 2 yr/4000 hr warranty! *remote monitoring of location, performance, operation/idling, fuel consumption, and alarms….ask your local Metso distributor for details

MELLOTT COMPANY

MILTON CAT

H.O. PENN MACHINERY CO., INC.

financing and other low-rate loan and lease programs available*

*Offer good through December 31, 2015. Program subject to credit approval. Additional terms and conditions may apply. Contact your Metso distributor for complete details.

FOLEY, INC.

CB CON-AGG

Con-Agg

www.mellotts.com

www.miltoncat.com

www.hopenn.com

www.foleyinc.com

Aggregates, quarry, contractor & recycling customers in MD, VA, WV, DE, and NC. Aggregates and quarry customers in NJ and NY, excluding New York City and surrounding counties

Contractor and recycling customers in ME, RI, VT, NH, MA and state of NY , excluding New York City and surrounding counties

Contractor and recycling customers in lower thirteen counties of NY state, and in the state of CT

Contractor and recycling customers in state of NJ

100 Mellott Drive Warfordsburg, PA 17267 4501 Green Point Drive Greensboro, NC 27410

800-634-5634

100 Quarry Drive Milford, MA 01757 508-634-3400 14 Kendrick Road Wareham Industrial Park Wareham, MA 02571 508-291-1200

16 Pleasant Hill Road Scarborough, ME 04070 207-883-9586

122 Noxon Road Poughkeepsie, NY 12603 845-452-1200

79 Robertson Blvd. Brewer, ME 04412 207-989-1890

699 Brush Avenue Bronx, NY 10465 718-863-3800

84 Concord Street North Reading, MA 01864 978-276-2400 2158 Plainfield Pike Commerce Park W #10 Cranston, RI 02920 401-946-6350 Route 2, One Cat Lane Richmond, VT 05477 802-434-4228

500 Commerce Drive Clifton Park, NY 12065 518-877-8000

783 Bloomingburg Road Bloomingburg, NY 12721 845-733-6400

294 Ainsley Drive Syracuse, NY 13210 315-476-9981

660 Union Avenue Holtsville, NY 11742 631-758-7500

55 Industrial Park Drive Binghamton, NY 13904 607-772-6500

554 Maple Street Hopkinton, NH 03229 603-746-4611

4610 E. Saile Drive Batavia, NY 14020 585-815-6200

Exit 7 I-89 780 Route 103 East Warner, NH 03278 603-746-4671

225 Richard Street Newington, CT 06111 860-666-8401 Contact our Aggregate Specialists In CT call Scott Gilligan 860-461-6534 In NY state call Kevin Kretschmer 646-315-2284

855 Centennial Avenue Piscataway, NJ 08855 info@foleyinc.com 732-885-5555

www.cbconagg.com Aggregates, quarry, contractor and recycling customers in state of PA 5300 Paxton Street Harrisburg, PA 17111 717-564-2121

4565 William Penn Hwy. Murrysville, PA 724-327-1300

Old Town Rd & Rte. 879 Clearfield, PA 814-765-1611

168 Industrial Park Road Somerset, PA 814-445-7915

11 Progress Drive Cranberry Twp., PA 724-776-7660

2955 Stewart Drive State College, PA 814-237-8338

3950 Depot Road Erie, PA 814-898-3388

Rt. 54 & I 180 (Exit 5) Turboville, PA 570-538-2551

1500 S. Altamont Blvd. Frackville, PA 570-874-3560

Wilkes-Barre Twp. Blvd. Wilkes-Barre, PA 570-822-8141

Aggregates and quarry customers in CT, MA, ME, NH, RI, & VT

145 Rose St. Indiana, PA 724-463-8743

4326 Oregon Pike Lancaster, PA 717-859-4905

95 Kelley Ave. Fitchburg, MA 01420 800-245-5472 978-343-6353 info@whitneyandson.com

3105 Route 219 Lantz Corners, PA 814-778-5250 US Rt. 6 East Mansfield, PA 570-662-7171

309 Foothills Lane Mount Pleasant, PA 724-696-4080 441 Route 315 Hwy Pittston, PA 570-883-1044

WHITNEY & SON, INC.

www.whitneyandson.com

Page 106 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 107

DELAWARE Folcomer Equipment Corp. Greenwood 302.349.5760

MARYLAND Folcomer Equipment Corp. Aberdeen 410.575.6580 Baltimore 410.247.7454 Upper Marlboro 301.627.3938 Frederick 800.951.2550

MAINE MASSACHUSETTS NEW HAMPSHIRE TB Equipment & Rental Lorusso Heavy Chappell Tractor Sales Bangor Equipment, LLC www.chappelltractor.com 207.262.0014 160 Elm St. 454 Route 13 South P.O. Box 857 P.O. Box 424 Walpole, MA 02801 Milford, NH 03055 508.660.7600 603.673.2640 Fax 603.672.0019

NEW JERSEY Harter Equipment Inc. Millstone Twp. 732.446.7600

NEW YORK George & Swede Sales & Service Buffalo/Rochester 585.584.3425 A Montano Co., Inc. Saugerties 845.247.0206 All Island Equipment West Babylon 631.643.2605

Tracey Road Equipment, Inc. www.traceyroad.com East Syracuse 315.437.1471 800.872.2390 Adams Center 315.788.0200 888.335.0200 Kirkwood 607.775.5010 800.370.9488

PENNSYLVANIA Highway Equipment Company www.highway-equipment.com 22035 Perry Highway Zelienople, (Pittsburgh) PA 724.452.7800 5846 West Rd. & I-79 McKean (Erie Area), PA 16426 814.476.7755 Rt. 219 North Dubois, PA 15801 814.371.3600

Page 108 â&#x20AC;¢ December 30, 2015 â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ CONSTRUCTION EQUIPMENT GUIDE

TR AM AC

KEEP YOUR BELTS FULL. Å&#x2DC; 0RXQW D 7UDPDF 5RFN %UHDNHU DW \RXU SULPDU\ Å&#x2DC; $YRLG JDSV LQ SURGXFWLRQ Å&#x2DC; 5HDFK LQ TXLFNO\ WR EUHDN DQG FOHDU EULGJHG DQG EORFNHG PDWHULDO Å&#x2DC; (QVXUH VDIHW\ ,QFUHDVH SURGXFWLRQ DQG UHOLDELOLW\ Å&#x2DC; 7UDPDF LV D \HDU ROG IDPLO\ RZQHG FRPSDQ\ :H VSHFLDOL]H LQ 5RFN %UHDNHU (QJLQHHULQJ 0DQXIDFWXULQJ 6DOHV DQG 6XSSRUW

TRAMAC

800-526-3837

Â&#x2026; $"33*&4 1":-0"% 07&3 106/%4 Â&#x2026; )1 $6..*/4 &/(*/& Â&#x2026; */$) 36##&3 53"$,4 Â&#x2026; 41&&% 53"7&- Â&#x2026; ."%& */ 64" Rayco Crawler Trucks are designed as carrier vehicles that can be outfitted with any type of beds/bodies/specialty equipment desired by the end user. The low ground pressure Crawler Trucks are the ideal solution for those off-road jobsites that conventional truck-mounted equipment simply cannot reach. The RCT150 can carry a full 15,000-pound payload with ground pressure of only 4psi. Whether itâ&#x20AC;&#x2122;s a simple flatbed, or specialty equipment like bark blowers and digger derricks, the RCT150 answers the call.

CALL -

800.392.2686

VISIT -

www.tramac.com

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;¢ www.constructionequipmentguide.com â&#x20AC;¢ December 30, 2015 â&#x20AC;¢ Page 109

THE W.I. CLARK COMPANY 30 Barnes Industrial Park Rd Wallingford, CT 06810 203/265-6781

NEVER SIDETRACKED.

Brookfield, CT 06804 203/775-1203

Plainfield, CT 06374 860/546-4808 SCHMIDT EQUIPMENT INC. 80 Southbridge Rd. North Oxford, MA 01537 508/987-8786 Billerica, MA 01862 978/667-4345 Plymouth, MA 02363 508/830-9997 No. Swansea, MA 02777 508/379-9810 Springfield, MA 01104 413/543-5595

JESCO 118 St. Nicholas Ave. South Plainfield, NJ 07080 908/753-8080 800/241-7070 Fairfield, NJ 07004 973/227-2221 800/321-8080

Lumberton, NJ 08048 609/267-2020 888/217-0600 Beacon, NY 12508 845/831-1800 800/724-0725 Deer Park, NY 11729 844/482-0910

ELLIOTT & FRANTZ, INC. ELLIOTT & FRANTZ, INC.

'HFDGHV DJR +LWDFKL EXLOW WKH Ã°UVW K\GUDXOLF H[FDYDWRU LQ -DSDQ

6680 Allentown Blvd. Harrisburg, PA 17112 717/652-5430

12051 Tac Court Manassas, VA 20109 703/257-2381

10421 Guilford Road Jessup, MD 20794 301/725-7394

450 E. Church Road King of Prussia, PA 19406 610/279-5200

38420 Sussex Highway Delmar, DE 19940 302/846-3033

7KDW OHJDF\ RI LQQRYDWLYH WHFKQRORJ\ FRQWLQXHV WRGD\ GHOLYHULQJ XQPDWFKHG HIÃ°FLHQF\ UHOLDELOLW\ DQG GXUDELOLW\ GD\ DIWHU GD\ 7KH UHVXOW" <RX JHW DQ H[FDYDWRU WKDW VWDUWV ZKHQ \RX GR DQG GRHVQÃ¢W NQRZ WKH PHDQLQJ RI WKH ZRUG Ã¬TXLW Ãº 7KDWÃ¢V WKH 3RZHU RI )RFXV

RUDD EQUIPMENT COMPANY 4344 Poplar Level RD Louisville, KY 40213 502/456-4050 Pittsburgh, PA 412/741-1731 Clearfield, PA 814/765-8500

HitachiConstruction.com

Charleston, WV 304/755-7788

Page 110 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.jescoditchwitch.us 118 St Nicholas Ave. • South Plainfield, NJ 07080 908-753-8080 • FAX 908-753-7853 Shrewsbury, MA 508-719-0200 Middletown, DE 302-376-0784 Beacon, NY 845-831-1800

Deer Park, NY 844-482-0910 Fairfield, NJ 973-227-2221 Lumberton, NJ 800-241-7070

BINDER MACHINERY 2820 Hamilton Blvd. S. Plainfield, NJ 07080

908/561-9000 201 North Route 73 Winslow Township, NJ 08095

856/767-5900

Maximize Production with ESCO

CN WOOD CO., INC. 200 Merrimac Street Woburn, MA 01801

781/935-1919 Whately, MA

413/665-7009 Johnston, RI

401/942-9191 Avon, MA

508/584-8484

JORDAN EQUIPMENT CO. 18 Blackstrap Road Falmouth, ME 04105

207/797-2240 Fax: 207/878-3506

The Ultralok Tooth System offers a hammerless lock that is integrated into the point - coupled with ESCO excavator buckets, it maximizes penetration, reduces fuel costs, and increases productivity. © 2011 ESCO Corporation.

35 Daves Way Hermon, ME 04401

207/848-9036 744 Clough Mill Road Pembroke, NH 03275

603/228-3377 www.jordanequipment.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 111

Harter Equipment, Inc.

A. Montano Company

Tracey Road Equipment

Highway Equipment Company

615 State Route 33 Millstone Twp., NJ 08535 732-446-7600

571 Route 212 Saugerties, NY 12477 845-247-0206

6803 Manlius Center Road • PO Box 489 • East Syracuse, NY 13057 315-437-1471 • 800-872-2390

22035 Perry Highway • Zelienople (Pittsburgh), PA 16063 724-452-7800

www.harterequipment.com

www.amontano.com

Kirkwood, NY 607-775-5010 • 800-370-9488

Henrietta, NY 585-334-5120 • 866-950-6210

McKean (Erie Area), PA 814-476-7755

Adams Center, NY 315-788-0200 • 888-335-0200

Albany, NY 518-438-1100 • 866-740-8853

Dubois, PA 814-371-3600

www.traceyroad.com

Highway Equipment Company of Ohio 1405 Timken Place SW Canton, OH 44706 330-915-8391

www.highway-equipment.com

Page 112 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Crews Work to Complete Charleston’s I-64 Bridge Deck

WVDOT photo

The $18 million contract was awarded to Kokosing Construction Company Inc. CHARLESTON from page 1

WVDOT photo

The contract calls for the rehabilitation of 19 bridges along Interstate 64, beginning at the Eugene Carter Memorial Bridge (also known as Fort Hill Bridge) and ending where the Brooks Street on-ramp enters the interstate.

WVDOT photo

Numerous expansion joints will be replaced, repairs will be made to barriers, a latex modified concrete overlay will be applied to bridge decks, and several cathodic protection systems will be replaced.

WVDOT photo

The project began on April 4, 2015, and the original completion date was set for Oct. 28, 2015. However, it was extended due to weather and project issues.

highway construction workers to travel safely and work efficiently within the I-64 construction zone. Kokosing Construction also is installing a new cathodic protection system, a complex rehabilitation method that electrifies a titanium layer within the concrete to protect against corrosion to help sustain a concrete structure’s integrity.” To install the contra flow lane and safety barrier for the construction crews, Kokosing used a 20-ton (18.14 t) rubber-tired excavator with a bracket attachment to move nearly 20,000 ft. (6,096 m) of temporary WVDOT photo barrier wall. To remove and To install the contra flow lane and safety barrier for the construction crews, install the 86 expansion Kokosing used a 20-ton (18.14 t) rubber-tired excavator with a bracket attachment joints on the interstate sys- to move nearly 20,000 ft. (6,096 m) of temporary barrier wall. tem around Charleston, Kokosing used a 43 ft. (13.11 m) boom operated forklift, known as a telehandler, Metalizing provides the Al-Zn-In protective surface that absorbs the corrosive chemicals that deteriorate a paired with the versatile construction 107 hp backhoe. To replace the bridge deck surface, a Kokosing subcon- structure. Essroc Concrete is providing more than 600 cu. yds. tractor, the Velotta Company, used a flexible concrete paver to pave more than 3,000 sq. yds. (2,294 sq m) — half a (458.73 cu m) of concrete to Kokosing Construction for the replacement of the 86 expansion joints and 1,200 ft. football field — of smooth concrete in one night. Velotta is overlaying the new concrete deck, paving (365.76 m) of barrier wall. Michael Baker International is the designer and inspecmore than 31,000 sq. yds. (23,701 sq m) of smooth concrete for the I-64 traveling public. Modified Concrete is tor of the design-build project. “Ongoing efforts for effective communication, a hardproviding the nearly 2,000 cu. yds. (1,529 cu m) of latex at-work attitude, and determination to provide the best modified concrete used to overlay the concrete deck. MidAtlantic Maintenance is providing the numerous traffic product for the owner and their contractors is leading this control signs and devices to keep the traveling public aware project to be a success for all,” Love said. (This story also can be found on Construction and safe when traveling through the construction zone. Equipment Guide’s Web site at www.constructionequipPullman was subcontracted to rehabilitate and metalize the undersides of the Eugene Carter Bridge. mentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 113

MIDLANTIC MACHINERY

2240 Bethlehem Pike Hatfield, PA 19440 215/822-0145 Harrisburg, PA • 717/652-3190 Baltimore, MD • 410/247-2100 Wilkes-Barre, PA • 570/824-9891 Frackville, PA • 570/874-6140 Laurel, DE • 302/715-5382 ANDERSON EQUIPMENT CO.

PENNSYLVANIA Pittsburgh, PA • 412/343-2300 Clarion, PA • 814/226-4100 Clearfield, PA • 814/765-5311 Somerset, PA • 814/443-2867 Cambridge Springs, PA • 814/398-8819 NEW YORK Buffalo, NY • 716/877-1992 Henrietta, NY • 585/334-6770 Syracuse, NY • 315/463-8673 Albany, NY • 518/785-4500 Watertown, NY • 315/788-5512 Endicott, NY • 607/748-3400 Olean, NY • 716/372-8822 NEW HAMPSHIRE Lancaster, NH • 603/788-6595 Manchester, NH • 603/627-7696 MAINE Bangor, ME • 207/942-0177 Gorham, ME • 207/591-5482 Farmington, ME • 207/778-6595 VERMONT East Montpelier, VT • 802/223-9689

EDWARD EHRBAR

www.ehrbar.com 4 Executive Plaza Yonkers, NY 10701 914/738-5100 Holbrook, NY • 631/563-7600 New York City, NY • 718/626-3331 42 Kenosia Ave. Danbury, CT 203/743-0088 BINDER MACHINERY CO.

2820 Hamilton Blvd. South Plainfield, NJ 07080 908/561-9000 201 North Route 73 Winslow Township, NJ 08095 856/767-5900 C.N. WOOD CO, INC.

Avon, MA • 508/584-8484 Woburn, MA • 781/935-1919 Whately, MA • 413/665-7009 Johnston, RI • 401/942-9191 PINE BUSH EQUIPMENT, CO. INC.

Route 302, P.O. Box 106 Pine Bush, NY 12566 845/744-2006 Holmes, NY 12531 • 845/878-4004 EAST PBE, INC.

283 Pane Road Newington, CT 06111 860/665-7470 • Fax: 860/665-7478

MADE WITH PASSION AND PRIDE

Page 114 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ROLLING OUT WHAT’S NEW

March 22-24, 2016 • Nashville, TN, USA • Music City Center New products that will improve efficiencies from 300+ exhibitors The industry’s hottest education such as “People, Plants and Paving” Networking with 6,000+ attendees to increase your go-to contacts

Co-located with

Pre-register now and save: www.worldofasphalt.com

Pages 115-118

Snow and Ice Section For more information on snow-clearing equipment and spreaders, visit CEG's Web site at www.constructionequipmentguide.com.

Arctic Snow & Ice Products Provide Precise Performance

Compatible with small skid steers, compact tractors and small wheel loaders, the CD pushers are useful for clearing small parking lots, sidewalks and larger driveways.

Sectional Sno-Pusher, a product division of Arctic Snow and Ice Products, offers its line of compact-duty pushers. Compatible with small skid steers, compact tractors and small wheel loaders, the CD pushers are perfect for clearing small parking lots, sidewalks and larger driveways. The snow pushers were developed by a veteran of the snow and ice management industry whose goal was to combine the precision of a small pusher with the capacity of a much larger one. Ideal for facility managers and established snow and ice removal professionals, the CD pushers also offer construction and landscape contractors a productive solution to maximize their fleet’s snow removal potential. Larger property owners, ranchers and farmers also can utilize these pushers on smaller equipment currently used in day-to-day operations. Featuring a host of features, the CD pushers reduce fuel and salt usage by increasing

pushing efficiency and eliminating follow-up plowing. Unlike traditional one-piece moldboard plows or pushers, the Sectional SnoPushers feature a sectional moldboard design. Each 24-in. (61 cm) wide section also is equipped with its own spring-loaded trip edge and polyurethane cutting edge to further allow precision pushing. This design allows each section to move up and down independently, enabling the pusher to effectively contour to uneven surfaces and remove snow in dips and depressions on the first pass, according to the manufacturer. The CD pushers are outfitted with Sectional Sno-Pusher’s Slip-Hitch system, providing faster, easier and more efficient operation. The system allows the pusher to automatically adjust and continuously readjust to the pavement grade, resulting in

fewer missed areas and less follow-up plowing. Because the Slip-Hitch ensures proper placement, less time and effort is required to position the pusher, making it ideal for inexperienced operators. It also enables the pusher to operate independently from the equipment, ensuring all four tires remain on the pavement at all times. This provides full traction, and eliminates drag and loss of horsepower. Bolt-on mechanical side panels protect the equipment, pusher and operator. Compared to pushers with rigid fixed panels that may be severely damaged if an obstacle were encountered, the CD pusher’s side panels rotate up and over small obstructions. The panels also feature durable AR-400 hardened-steel shoes. Combined with the Slip-Hitch system, the shoes are able to ride flat along the pavement, allowing for even wear and prolonged life, according to the manufacturer. Each moldboard section is individually mounted to the pusher’s mainframe with engineered polyurethane blocks. In the

unlikely event of damage, one single section can easily be unbolted, removed and replaced in less than 15 minutes, providing both time and cost savings. Designed for equipment weighing up to 5,000 lbs. (2,268 kg), the CD pusher is available in three sizes to accommodate a variety of equipment. The 6-ft. (1.8 m), CD6 model is the smallest, with a weight of 1,000 lbs. (453.5 kg) and pushing capacity of 0.7 cu. yds. (.5 cu m). Weighing in at 1,108 lbs. (502.5 kg), the CD8 is an 8-ft. (2.4 m) model that offers a capacity of 0.9 cu. yds. (.7 cu m). Finally, the CD10 is the largest of the compactduty pushers. The 10-ft. (3 m) pusher weighs 1,216 lbs. (551.5 kg) and offers a 1.1 cu. yd. (.8 cu m) capacity. One pusher fits all due to the universal bucket mounting system, which allows the pusher to be connected in minutes. Furthermore, every CD pusher is backed by a 2-year limited warranty. For more information, call 888/242-3766 or visit www.sectionalsnopusher.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 116 • December 30, 2015 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

Arctic Snow & Ice Products, Inc. UR JOIN O R DEALE K OR NETW

WHEN YOU C O US,, COMMIT TO ARCTIC COMMITS TO YOU.

We are growing and improving our manufacturing facility to meet your growing needs. New dedicated materials processing center, Larger, faster paint process center and a larger multi station shipping center. All these improvements were done to service y you,, our p partner in business. Our commitment to y you is being the best we can be and provide the finest products in the snow removal industry.

SELL THE MOST SOUGHT AFTER SNOW REMOVAL PRODUCT ON THE MARKET TODAY!

We support the

Arctic Sectional Sno-Pusher Sectionalsnopusher.com Sectionalsnopusher onalsnopusherr.com • (888) 2-ICE-SNO

Light, Flexible…

Virnig Launches Poly Edge Option for Snow Blades A polyethylene cutting edge option has been recently added to Virnig Manufacturing’s snow attachment lineup.

Virnig Manufacturing Inc. announced a new poly edge option. A polyethylene cutting edge option has been recently added to Virnig Manufacturing’s snow attachment lineup. These cutting edges are extremely durable and have been rigorously tested to meet Virnig’s high standards, according to the manufacturer. This option is compatible with new and old Virnig angle snow blades and light-duty angle snow blades. The 1 by 7 ¾ in. (2.5 by 19.7 cm) poly edge option is made from UHMW (ultra high molecular weight) polyethylene. It is reversible and replaceable and allows 5 ¼ in. (13 cm) of total wear. Poly is lighter and more flexible than steel but more rigid than rubber. It also wears comparable to a steel edge in snowy or wet conditions, according to the manufacturer. Virnig also offers rubber edges for snow blades. Virnig cutting edges are pre-drilled and ready for installation. Replacement kits are available. All Virnig products are backed by a one-year warranty, and the skid steer attachments are built with a universal mount to fit most skid steer loaders including: Bobcat, Caterpillar, ASV, Case, Daewoo, Gehl, JCB, John Deere, Kubota, Mustang, New Holland, Takeuchi, Terex, Volvo, Wacker-Neuson and others. For more information, visit virnigmfg.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • December 30, 2015 • Page 117

PROFITABILITY

n e v i r D

The Plow Shop At Lafayette Welding, Inc. 64 W. Ridge Pike Limerick, PA 19468 610-489-3529 F610-489-8563

TRIP-EDGE

C-PLOWS

Torsion-Trip V-Plow TRIP-EDGE

No matter what the conditions, Hiniker professional grade snowplows are ready to help you reach new levels of productivity and performance!

SCOOP PLOWS

V-PLOWS: Trip-edge designs give smooth operation and effective protection. Double acting cylinders provide positive moldboard position control.

FULL-TRIP

CONVENTIONAL PLOWS

C-PLOWS: Get the heavy-duty performance of the Hiniker trip-edge conventional plow plus the added versatility of a high performance backdrag plow. An amazing time-saver in driveways, parking lots and loading docks.

Tri Tank Corp 115 Farrell Road Syracuse, NY 13209 315-451-8663 F 315-453-0826

SCOOP PLOWS: High capacity concave shape captures snow to efficiently clear large lots and parking areas. Angles left or right for conventional plowing. CONVENTIONAL PLOWS: 30 inch tall high-curvature blades roll deep snow off quickly and efficiently. Commercial plowers will appreciate the extra strength and efficient design.

TRIP-EDGE

CONVENTIONAL PLOWS

SPREADERS: Spread ice control materials quickly and easily with an efficient Hiniker Spreader. Long-lasting stainless steel construction. Choose between OHV gas engine or dual-motor electric hopper spreaders, or new stainless steel tailgate spreader models! TAILGATE SPREADERS

HINIKER COMPANY 1-800-433-5620 s www.hiniker.com

Confer RBR LLC/ Confer Supply LLC 434 Old Suffolk Ave. Islandia, NY 11749 631-234-8188 F631-234-4654

Page 118 • December 30, 2015 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

WHAT DRIVES THIS,

DRIVES US. A DewEze Poly-U coated valve tank paired with an industry-leading DewEze Clutch Pump kit delivers true “Live Hydraulics” so you can plow more efficiently, shrugging off corrosive chemicals and nasty weather without the high cost of stainless steel. For additional information on the DewEze Hydraulics product line, contact our sales team or visit our website.

¨ 620.896.7381 / 800.835.1042 www.deweze.com

Construction Equipment Guide • Parts Section • www.constructionequipmentguide.com • December 30, 2015 • Page 119

Conn. Plans Bridge Resurfacing, Safety Improvements on I-91 The Connecticut Department of Transportation is developing plans for resurfacing, bridge and safety improvements on I91 in Wethersfield and Hartford. The purpose of the project is to rehabilitate the underlying concrete slabs, which are exhibiting signs of distress, to perform routine maintenance on the various bridges, and to upgrade the roadside appurtenances. The proposed improvements include rehabilitating the concrete pavement on I-91, including southbound and northbound directions as well as the ramps. There are five structures, which carry I-91 that will require deck rehabilitation and parapet modifications. Upgrades will be made to the roadside appurtenances to meet the current design standards. The present schedule indicates that the design will be completed in November 2017, with construction anticipated to start in the spring of 2018, assuming acceptance of the project, availability of funding and

receipt of any required right-of-way and environmental permits. This project will be undertaken with 90 percent federal and 10 percent state funds. It is the department’s policy to keep the public informed and involved when such projects are undertaken. It is important that the community share its concerns with us to assist in the project’s development. If there is adequate interest, a public informational meeting will be conducted upon the completion of the preliminary design. At this time, it is not anticipated that a formal public hearing will be necessary. Anyone interested in receiving information on this project may do so by contacting Susan M. Libatique at 860/594-3179 or by email at Susan.Libatique@ct.gov. Please make reference to State Project No. 159-191. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

www.ConstructionEquipmentGuide.com

985! 1 e c n Si

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com

EESSCO Appointed Syntron, Link-Belt Distributor Syntron Material Handling announced the appointment of EESSCO as its new distributor of Syntron and Link-Belt products covering the New England states. EESSCO has more than 100 years of combined experience within the aggregates industry providing aggregate equipment, parts and service. According to Dick Vinning, general manager of EESSCO, “we are very proud of the fact that Syntron has the confidence in our organization to name us their official distributer for the Northeast.” Syntron Material Handling provides material handling solutions for conveying, feeding, screening, elevating, vibratory flow aids and mining controls of bulk product. It is committed to understanding your needs and partnering closely with you to provide solutions that improve performance and minimize operating cost. Whether it’s enhanced optimization of existing systems or newly customized plants, its dedicated team of engineers and sales staff will provide you with the most efficient and cost-effective solutions to meet your specific material handling needs, Syntron Material Handling announced the appointment of EESSCO as its new distributor of Syntron and Link-Belt products covering the New England states. according to the company. Syntron material handling operates two (This story also can be found on Construction manufacturing facilities located in the United dards and ISO Standard 9001:2008. It is a charter States and China. It employs 300 associates and member of CEMA and active member of Equipment Guide’s Web site at www.constructionequipmentguide.com.) all of its products are produced to OSHA stan- NSSGA, NMA, SME and PMMI.

PUMP REBUILDS ALL MAKES & MODELS OF MACHINES SAVE UP TO 60%

• Full-Service Hydraulic Repair • Turnkey Hydraulic Systems • Hydraulic System Integration • Professional Field Service • Full Machine Shop • Hard Chrome Plating • Large Seal Inventory

Call Ken or Marc

716/681-8474 Fax: 716/681-8514 4474 Walden Avenue Lancaster, NY 14086 sales@fluidpowerservice.com

ONE YEAR WARRANTY CYLINDER REPAIR EXCHANGE

www.fluidpowerservice.com

Next Issue Closes January 4th, 2016

Page 120 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

EMPLOYMENT OPPORTUNITIES Eagle Power and Equipment Corp. is an authorized dealer of Case Construction Equipment, Kubota Construction Equipment and Takeuchi Construction Equipment. We have been providing service to the tri-state area for well over 30 years.

We are looking for a qualified Service Manager to join our organization in the Montgomeryville, PA location. This individual will be responsible for managing a Service Department with 15 Techs reporting directly to him. We offer a safe work environment, with state of the art computer systems, tools and equipment. Our shop and our road trucks are fully equipped for any job. We offer a competitive salary, major medical and a 401 (k) retirement plan. Please send résumés to info@eaglepe.com or contact Vince McGovern at 215-699-5871.

Expired Provisions of Tax Code Extended With New Legislation LAW from page 1

ups, allowing businesses with gross receipts of less than $5 million a year to take the credit against their payroll taxes (capped at up to $250,000 per year) for up to five years. alliantgroup commended these commonsense solutions and the bipartisan work it took to get the extenders deal to the finishline. The changes to the R&D Tax Credit and other business-friendly provisions such as the extension of the Section 179D tax deduction for energy-efficient commercial buildings will be a massive help to companies across the nation, putting valuable tax dollars back into the pockets of U.S. businesses for job creation and growth. Such a massive undertaking, particularly with regards to the R&D Tax Credit and Section 179D, which both took several years of hard work and negotiations to come to fruition, could not have happened without

several congressional members leading the charge for U.S. businesses. In particular, alliantgroup thanked Congressman and House Ways and Means Committee Chairman Kevin Brady (R-TX) for his leadership in seeing the extenders deal through. The group thanked Sens. Ron Wyden (DOR) and Orrin Hatch (R-UT) for their leadership in making the entire deal happen and for their championing of the R&D credit; Sens. Pat Roberts (R-KS), Chuck Schumer (D-NY) and Chuck Grassley (R-IA) for their vocal support for the AMT turnoff and Sen. Chris Coons (D-DE) for his championing of the start-up provision. Sen. Ben Cardin (DMD) also was thanked for his exhaustive efforts with 179D and its two-year extension. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Keep Up With All the Industr y News Subscribe to

Construction Equipment Guide Today! Toll Free

800/523-2200

New York Adds 30,500 Construction Jobs MECHANIC NEEDED EXPERT EARTHMOVING MACHINERY Diagnostics & Repair. Immediate opening In Gorgeous Charlotte, NC. Excellent Opportunity For a Qualified Individual. Send Resume to: Sales@wilcoxtractor.com

EMPLOYMENT from page 1

Between November 2014 and November 2015, 44 states and the District of Columbia added construction jobs, with California adding the most (41,000 jobs, 5.9 percent). Other states adding a high number of new construction jobs for the past 12 months include New York (30,500 jobs, 8.9 percent), Florida (29,300 jobs, 7.2 percent) and Colorado (12,000 jobs, 8.3 percent). Hawaii added the highest percentage of new construction jobs during the past year (12.5 percent, 3,900 jobs), closely followed by Nevada (12.3 percent, 7,800 jobs), South Dakota (12.3 percent, 2,700 jobs), Arkansas (12.0 percent, 5,600 jobs) and Idaho (11.4 percent, 4,200 jobs). Six states shed construction jobs during the past 12 months. West Virginia lost the highest percentage and total number of construction jobs (minus 14.5 percent, minus 4,600 jobs). Other states that lost jobs for the year include Rhode Island (minus 6.7 percent, minus 1,100 jobs), North Dakota (minus 4.4 percent, minus

1,600 jobs), New Mexico (minus 0.7 percent, minus 300 jobs), Pennsylvania (minus 0.6 percent, minus 1,500 jobs) and Maine (minus 0.4 percent, minus 100 jobs). Florida added the most construction jobs between October and November (10,600 jobs, 2.5 percent). Other states adding a high number of construction jobs include New York (9,100 jobs, 2.5 percent), Texas (9,000 jobs, 1.3 percent) and Massachusetts (4,800 jobs, 3.6 percent). South Dakota added the highest percentage of construction jobs during the past month (5.6 percent, 1,300 jobs), followed by Iowa (4.6 percent, 3,700 jobs), Massachusetts and Vermont (3.5 percent, 500 jobs). A dozen states lost construction jobs during the past month while construction employment was unchanged in the District of Columbia. Pennsylvania shed more construction jobs than any other state (minus 4,600 jobs, minus 1.9 percent), followed by North Carolina (minus 4,200 jobs, minus 2.2 percent), Kansas (minus 1,500 jobs, minus 2.3 percent), Illinois (minus 1,500 jobs, minus 0.7 percent), North Dakota (minus 1,300 jobs, minus 3.6

percent) and Arkansas (minus 1,300 jobs minus 2.4 percent). Delaware (minus 3.6 percent, minus 800 jobs) and North Dakota lost the highest percentage of construction jobs between October and November, followed by Arkansas, Kansas, North Carolina and West Virginia (minus 2.2 percent, minus 600 jobs). Association officials said many firms report that some positions are going unfilled because of the broad shortage of qualified workers. They said the steps outlined in the association’s Workforce Development Plan, like increasing investments in career and technical education programs, will allow firms to keep pace with growing demand. “Even more people would be working in construction today if we had a better pipeline for preparing new workers,” said Stephen E. Sandherr, the association’s CEO. For more information, visit www.agc.org. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 121

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $105 • Color $155

Excavator, Backhoe & Loader Buckets, New & used, over 500 in stock, also Grapples, Thumbs & other attachments

C&S Equipment Co. 609/267-0782

25-26 AP

IN STOCK Stone Box, Miser Box, Stone Miser, Stone Sled, Rock Boat, Bedding Box, Gravel Box, 5 Yard............$4,200 7 Yard .............$5,450 9 Yard .......................$5,850 www.JFINC.com • 856-881-3185 25-26 TM

NEW AND SURPLUS STRUCT. STEEL JUMBO BEAMS, PIPE, ROAD PLATE Joseph Fazzio Inc.com • 856-881-3185 N.J. 26-1 TM

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make & model. Call McLaren 888-492-4230 26-1 DH

“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of HighQuality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states .............................................................Call

Lowboy Trailer Pin On Flip Axles, In Stock, 275/Tires, Aluminum Wheels 610/534-0700 John at Stephenson Equipment 25-26 TM

Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us 25-26 TM

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. Call McLaren 888-492-4230 26-1 DH

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air SemiPneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 26-1 DH Call McLaren 888-492-4230

Diesel & Gas / LP Exhaust Scrubbers

Next Issue Closes Januray 4 Foley Engines 800.233.6539

26-1 KU

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 614-395-4064 25-26 EB

2006 Ditch Witch FX60 Vacuum Excavator, 800 gal spoils capacity, 200 gal water tank, 4 cylinder Cummins engine, 3251 hours ..............................................$32,500 25-26 EB Call Tania 614-443-9751 x237

Here' s how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $105 per ad, $50 additional for color. Additional $20 to place online • Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Northeast States. For more information, call Construction Equipment Guide today at

800/523-2200

Page 122 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLASSIFIEDS CrAnes

LoADers

Crane Inspections

Backhoe Loaders

ALL tYPes oF CrAnes InsPeCteD AnD CertIFIeD

new Holland U80C Skip Loader, 85 HP, 4WD, Hydraulic Gannon, Unit #73652, 514 hours ..........................$57,996.

Accredited by the US Dept. of Labor Under 29CFR Part 1919 and Accredited by CALOSHA Call 215-639-2579 Atlantic Crane Inspection Services Visit us at www.atlanticcrane.com FLAt rAte InsPeCtIons All types, Any Model Cranes osHA Inspected and Certified Certified OSHA and ANSI Full-Time Inspectors Dielectric testing

A-Z equipment rentals & sales 480-955-0672

skid steer Loaders new Holland L218 Skid Steer, Foamed - Filled Tires, 60 HP, 66’’ bucket, Unit #53690, 955 hours ..........................$19,864.

2007 Volvo L110F, Cab with AC, Coupler, GP Bucket, Good condition, 7,173 hrs ....$98,500. A. Montano Co., Inc. 845-247-0206

MAterIAL HAnDLers

We are the Heavy equipment Decal experts.

sennebogen 835M-C, s/n 8350-892, Fair condition, 15,000 hours ..........................$90,000.

Call 215-536-5339 Email: info@CustomServices Company.com

gibson Machinery, LLC 440-439-4000

Able tool & equipment 860-289-2020

Mobile Swing Cab, Fixed Cab, Lattice Truck & Crawler

trACtors Agricultural tractors John Deere 3320 with 300CX Loader, Box Scraper sold separately, Unit #36396, Good condition, 620 hours ........$19,948. A-Z equipment rentals & sales 480-695-0672

Subscribe to CEG today...

trUCKs Dump trucks 2007 Moxy Mt41 Articulated Dump Truck, 40 ton with scissor tailgate, Good condition, 5,000 hrs ............................$195,000. gibson Machinery, LLC 440-439-4000

tower

Get an edge on your competition! construction equipment guide northeast edition subscribers are the best informed about construction news, construction equipment, sales, auctions, equipment prices, trends and changes in the industry and activities of its people. call toll free! We now accept visa, Mastercard & american express!

SUBSCRIPTIONS:

One Year $65

(within United States & Puerto Rico Only)

cardMeMber’S naMe _________________________________________________________

overhead

cOMpanY naMe _______________________________________________________________ Street____________________________________ phOne nO. ________________________

Prep Classes with Written exam

one-Hour Practice with Practical exams

Prompt, Knowledgeable Service. Great Prices.

2012 Wacker neuson 9503, Wheel Excavator, Excellent condition, 1,500 hrs ....$90,000.

nCCCo Crane operator training

Call Paul 610-270-0900

Wheel Loaders

Wheeled excavators

trAInIng

Hands on training with Practical exams

eQUIPMent DeCALs

eXCAVAtors

215/885-2900 • fax 215/885-2910 • toll free 1-800/523-2200

Fiat Allis sL14B, ROPS, Enclosed Cab, Runs well with no leaks of any kind, 50% undercarriage ......$4,900 oBo.

A-Z equipment rentals & sales 480-955-0672

www.QuipCal.com

pleaSe enclOSe paYMent With Order and mail to - 470 Maryland drive• fort Washington, pa 19034

Crawler Loaders

Call 800-325-6455 Stephenson Equipment Visit our website: www.stephensonequipment.com

rePLACeMent DeCAL sets for Construction, Forestry, and Industrial equipment. safety Decals.

classified rates:30 Words or less for $35.00. each additional Word is $1.16. for just an additional $20 your ad can be posted on our online searchable database for 30 days ad runs for 2 (two) insertions - no changes in second insertion.

citY ______________________________________State _______ zip ________________

check enclosed

viSa

MaStercard

american express

card nuMber

exp. date (Mo./Yr.)

Signature Of authOrized cardhOlder

TOLL FREE

signal Person

1-800/523-2200 FAX 215/885-2910

rigger I & II

470 Maryland dr. • ft. Washington, pa 19034 email: circulation@cegltd.com

re-Certifications 4 training locations in PA or at your location

All instructors are NCCCO Certified Call Chris 717-558-7248 Stephenson Equipment Visit our website: www.stephensonequipment.com nCCCo Crane operator training Mobile tower self erecting tower overhead Articulated Knuckleboom service truck rigger 1 & 2 signal Person Trained at our location in PA or NJ or your location. All trainers NCCCO Certified Call 215-639-2579 Atlantic Crane Inspection Services Visit us atwww.atlanticcrane.com

DO YOu Have a Few Pieces OF HeavY equiPmeNt tO seLL? Construction Equipment Guide is THE Place to List It!

ONLY

$35

2 InsertIons In one regIon (northeast, southeast, Midwest, West) 30 words or less - $1.16 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database. You must have a classified print ad to do so.

Call 800-523-2200 or go online to place your ad:

www.constructionequipmentguide.com/pages/customer/classifieds.asp and place your ad through our website and we will contact you!

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 123

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted JOHN DEERE 744J WHEEL LOADER LOW HOURS GOOD CONDITION CONTACT: JOE PHONE: 724-944-5569 EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– SOIL COMPACTOR | I NEED SOIL COMPACTOR AND MOTOR GRADER CONTACT: SALIM K A PHONE: 9745062657,9446465929 EMAIL: SALIMKAJCB86@GMAIL.COM –––––––––––––––––––––––––––––––– WHEEL LOADER 644B | JOHN DEERE WHEEL LOADER 1975 TO 1985 CONTACT: DAVID PHONE: 6417407315 EMAIL: MEGENJEPSEN217@YAHOO.COM –––––––––––––––––––––––––––––––– BUCKET DRILLING RIG | RIG TO DRILL DRY WELLS 30 DEEP; IDEALY 42" TO 60" DIAMETER. THANK YOU. CONTACT: JOHN GORSKY PHONE: 5596515820 FAX: 5596515830 EMAIL: JOHN@JT2INC.COM –––––––––––––––––––––––––––––––– NEEDED: CAT 938 OR 950 OR A JOHN DEERE 644K UNDER 2500 HRS. PREFER COUPLER BUCKET AND FORKS CONTACT: GREG MARTIN PHONE: 614-562-4830 EMAIL:MACHINERYMART @MIDOHIO.TWCBC.COM –––––––––––––––––––––––––––––––– WANTED: (2) DEERE 300D II HAUL TRUCKS | LOOKING TO PURCHASE 2 LOW HOUR DEERE 300D II HAUL TRUCKS. CONTACT: GLENN RUSSELL PHONE: 3603147413 FAX: 3607273222 EMAIL:GLEN@VISTAEQUIPMENT.NET –––––––––––––––––––––––––––––––– CAT WHEEL LOADER | WE ARE INTERESTED IN CATERPILLAR WHEEL LOADERS AND OTHER EQUIPMENT . CONTACT: GEORGE SAEID PHONE: 717-666-1117 EMAIL: SALES2@GCESEQUIPMENT.COM –––––––––––––––––––––––––––––––– 23 TON REAR MOUNT BOOM TRUCK | 23 TON NATIONAL CRANE OR EQUAL. (REAR-MOUNT ONLY) CAB IF POSSIBLE. UNADVERTISED. EAST COAST IF POSSIBLE. CONTACT: BOB PHONE: 919-896-4782 EMAIL: NCNETWORKBOB@GMAIL.COM –––––––––––––––––––––––––––––––– CARTAWAY CONCRETE MIXER CONTACT: RONALD J CLARK PHONE: 801-768-4753 EMAIL: CLARRJCC@Q.COM –––––––––––––––––––––––––––––––– MANUAL FOR A GRIMMER SCHMIDT 185 AIR COMPRESSOR | I NEED PARTS, OWNER, SERVICE MANUALS ALONG WITH A WIRING DIAGRAM. THIS IS A FORMER MILITARY UNIT BUT AS A TRAINING FACILITY WE LIKE TO HAVE THE MANUALS SO STUDENTS CAN BECOME USED TO USING THEM. IN SOME CASES SAFETY BECOMES AN ISSUE ALSO. CONTACT: LARRY POLSLEY EMAIL: POLSLEYL@MSN.COM ––––––––––––––––––––––––––––––––

WE BUY EQUIPMENT MANUALS | WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS (NOT INCLUDED TRUCKS AND VEHICLES) . WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL US. CONTACT: GRACE FRANCES PHONE: 2708492270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– CAT 938G WHEEL LOADER | LOW HOUR - CAT 938/950 WHEEL LOADER CONTACT: SCOTT EMAIL: SWORTH@ UNIVERSAL-MACHINERY.COM –––––––––––––––––––––––––––––––– 2-D7G BULLDOZERS NOT ADVERTISED | NEED WITH WINCH OR RIPPER FOR PARTS I PAY CHEAP RUNNING OR NOT RUNNING CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL:JEANMAURICEBOUTIN@ VIDEOTRON.CA –––––––––––––––––––––––––––––––– TIPPER 10TYRA CONTACT: MOHITGUPTA KUMAR PHONE: 9837097931 EMAIL: YOURMOHIT01@GMAIL.COM –––––––––––––––––––––––––––––––– RM300 SOIL ROTOR USED | NEED FOR A CLIENT, USED IN EXCELLENT CONDITION, NO MORE THAN 10 YEARS OLD: CAT RM300 ROTARY MIXER, WITH SOIL ROTOR. CONTACT: GUILLERMO CARDONA PHONE: 7866636624 EMAIL:ECOALLIANCES@OUTLOOK.COM –––––––––––––––––––––––––––––––– TIPPERS | 12TYRE TIPPERS CONTACT: NAVEED PHONE: 9989508683 FAX: 08782262814 EMAIL: SRTNAVEED@GMAIL.COM –––––––––––––––––––––––––––––––– 89 KENWORTH T600 | SOME TO START DUMP TRUCKING CONTACT: CARLOS CANTU PHONE: 9794189661 EMAIL: CCANTU99@GMAIL.COM –––––––––––––––––––––––––––––––– CASE 580 OR 590 L OR M | 4X4, EXT HOE, 4IN1, EROPS, HOURS 4,000, EXCELLENT COND ONLY $28,000, WITHIN 500 MILES OF BOSTON CONTACT: CHRIS EMAIL: CJBROCK2002@YAHOO.COM –––––––––––––––––––––––––––––––– USED 330 CAT EXCAVATOR | USED 330 CAT EXCAVATOR FOR CONSTRUCTION. CONTACT: BEN ASIEDU PHONE: 630 247-3191 EMAIL: BENJAMINASIEDU@ATT.NET ––––––––––––––––––––––––––––––––

TOP CYLINDER | TOP CYLINDER, LOOKING TO ADD IT TO THE MACHINE CONTACT: JEFF PHONE: 4129990058 EMAIL: MREDSTREESERVICE@COMCAST.NET –––––––––––––––––––––––––––––––– LEEBOY 8500 | **WANTED*** LEEBOY 8500 OR SOMETHING VERY SIMILAR. CASH BUYER. MAX PRICE $15K CONTACT: CHARLES EMAIL: CFLYNN404@GMAIL.COM –––––––––––––––––––––––––––––––– CASE CX160B EXCAVATOR | LOW HOUR CASE CX160B EXCAVATOR CONTACT: FRANK PHONE: 1-800-33-GROFF FAX: 732-780-3618 EMAIL:FRANKHORAN @GROFFTRACTOR.COM –––––––––––––––––––––––––––––––– TRUCK TANDEM AXLE | I NEED A TANDEM AXLE TRUCK FOR SHORT RUNS. IT MUST BE WHITE (COLOR). IT HAS TO HAVE LOW MILEAGE. MID 20K RANGE MAX PRICE. CASH DEAL. READY TO BUY TODAY!! SOUTH EAST USA. PLEASE, NO OFFERS FROM OVERSEAS. CONTACT: CHARLES EMAIL: CFLYNN404@GMAIL.COM –––––––––––––––––––––––––––––––– JCB TELEHANDLERS 550-170 YEARS 2005, 2006 AND 2007 CONTACT: STEVE PHONE: 281-491-0614 EMAIL: STEVE@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– PLASTER SPRAYING MACHINE | WE ARE LOOKING FOR WET MORTAR SPRAYING MACHINES HAVING A HORIZONTAL DELIVERY DISTANCE YO TO 150 METER PLUS CONTACT: HARISH RUPAREL PHONE: 919820913535 FAX: 912224187144 EMAIL:HARISHRUPAREL@GMAIL.COM –––––––––––––––––––––––––––––––– JOHN DEERE WHEEL LOADER 644 B CONTACT: ROBERT CLINTON EMAIL: ROBERT@ HARRISONMACHINERY.COM –––––––––––––––––––––––––––––––– CAT GRADERS | LOOKING FOR CAT GRADERS CONTRACTOR OWNED. 140G..140H...14G...14H... CONTACT: DALE LAMPHERE PHONE: 360-551-9778 EMAIL: DALE.SALES.HEH@GMAIL.COM –––––––––––––––––––––––––––––––– PINION SHAFT ASSEMBLY | 7 TEETH ON PINION, 36 ON RING, HAS ROCKWELL SYMBOL STAMPED ON TIMKEN BEARING LOCKNUTS..6 BOLTS HOLD IT IN, COMES OUT FROM FRONT..DOESNT HAVE REGULAR REAR PAN, SPLITS LEFT TO RIGHT, FOR A REAR WHEEL DRIVE 1970 WAIN ROY FRONT END LOADER/BACKHOE, MODEL 220 SER# 1228, MAY BE A FORD REAR END, MAY BE MILITARY SURPLUS, ANY HELP WOULD BE GREATLY APPRECIATED. CONTACT: MARK HAMMOND PHONE: 1-802-349-9955 EMAIL: MARKIS38@HOTMAIL.COM ––––––––––––––––––––––––––––––––

CAT WHEEL LOADERS | WE NEED RUNNING OR NON-RUNNING CAT WHEEL LOADERS 910, 920, 930, 936 & 936E WE NEED RUNNING OR NON-RUNNING CAT WHEEL LOADERS 950, 950B, 950E, 950F/F-II, 966C/E & 966F/F-II WE NEED RUNNING OR NON-RUNNING CAT WHEEL LOADERS 970F, 980C, 980F, 988B & 972G CONTACT: RIZ PHONE: 832-528-0786 EMAIL: RIZ@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– LANDFILL COMPACTORS | WE ARE LOOKING FOR CAT 836H LANDFILL COMPACTORS WITH 10,000 HOURS OR LESS PREFERRED AND CAT 816F LANDFILL COMPACTORS CONTACT: MARK PHONE: 519-686-1123 EMAIL: SALES@MARCELEQUIPMENT.COM –––––––––––––––––––––––––––––––– WANTED TO BUY NEW OR USED EQUIPMENT MANUALS | WE BUY NEW OR USED EQUIPMENT MANUALS, CONSTRUCTION OR AGRICULTURE, SERVICE, PARTS AND OPERATOR MANUALS. IF YOU HAVE MANUALS JUST SITTING ON THE SHELF, OR HAVE CHANGED OVER TO COMPUTER MANUALS, PLEASE GIVE ME A CALL BEFORE YOU THROW THEM AWAY CONTACT: JOHN WHITNEY PHONE: 530-864-0771 EMAIL: WHITNEYJ65@YAHOO.COM –––––––––––––––––––––––––––––––– CRANES | ALL TERRAIN CRANES. 100 TONS & ABOVE..ALSO CURRENT OPENING FOR LTM1400 & LTM1500. MUST BE GOOD CONDITION WITH GOOD HISTORY & BE FULLY EQUIPPED. CONTACT: RAY PHONE: 00971504360403 EMAIL: INFO@HEAVYTRAX.COM –––––––––––––––––––––––––––––––– JOHN DEERE WHEEL LOADER 644 B CONTACT: DAVID KUSTER PHONE: 6417407315 EMAIL: MEGENJEPSEN217@GMAIL.COM ––––––––––––––––––––––––––––––––

NEEDED 12 MONTHS BULLDOZER | NEED 12 MONTHS BULLDOZER CAT ERPILLAR D3AT D10 1975 TO 2015 LOW HOURS FROM USA ONLY «CONTRACTOR CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL:JEANMAURICEBOUTIN @VIDEOTRON.CA –––––––––––––––––––––––––––––––– SKID STEER CONTACT: JOHN KRAWCHUCK PHONE: 516-316-2309 FAX: 631-981-19020 EMAIL:MIKELGCONTRACTINGINC @GMAIL.COM –––––––––––––––––––––––––––––––– HOIST PETROL MOTOR 500KG WITH STANDS CONTACT: RAYMOND WAGUDE PHONE: +254722364629 EMAIL:RAYMOND.WAGUDE@GMAIL.COM –––––––––––––––––––––––––––––––– CAT LOADER | WE ARE LOOKING FOR ANY GOOD RUNNING OR SALVAGE MACHINES FROM THIS LIST: CAT WHEEL LOADER 980GI/980FI/980C/ 972H/972GI/970F/966H/966GI/966FII/ 966FI/966F/966E/966D/966C/950F/950E/ 950B/950A/936E/F/930/920/910 CONTACT: MINA NABIL PHONE: 7144944488 EMAIL: MINA@GCESEQUIPMENT.COM –––––––––––––––––––––––––––––––– CAT WHEEL LOADER | WE ARE LOOKING TO BUY, CAT WHEEL LOADER: , 950, 950B, 950E, 966D, 966E, AND 966F. CAT GRADER :140G, 140H, AND 14G CAT EXCAV: 225D, 235C, AND 235D BOBCAT : S130, S150, 220, 330 AND 753 JCB TELE HANDLER: 540-170, 550-140, 550-170 WE BUY RUNNING OR NONRUNNING MACHINES. CONTACT: NICK PHONE: +971527840246 EMAIL: HAJICONSTRUCTEST@GMAIL.COM –––––––––––––––––––––––––––––––– PILE BREAKER | I NEED ALL SIZES AND TYPES OF PILE BREAKER CONTACT: AHMED PHONE: 0096597537101 EMAIL: TALEP_AHMED@YAHOO.COM –––––––––––––––––––––––––––––––– PERKINS ENGINE 20425, 4 CYLINDER DIESEL | USED BUT RUNNING PERKINS 204.25 DIESEL 4 CYL DIESEL ENGINE TO FIT GEHL 5625 SKID STEER CONTACT: ERIC KIRK PHONE: 610-417-5123 FAX: 610-346-8415 EMAIL:DEANDRS@VERIZON.NET –––––––––––––––––––––––––––––––– WANTED GOOD CONDITION SET OF LUBRICATED RAILS WITH SHOES FOR D8K DOZER CONTACT: DIANNE PHONE: 1225 6644232 FAX: 12256641368 EMAIL:DIANNE@RICHARDPRICECONTRACTING.COM –––––––––––––––––––––––––––––––– SA 48 BOMBARDIER CONTACT: JOHN LUCCHESI PHONE: 2039483534 EMAIL: JLUCCHESI@BARRETTROOFING.COM ––––––––––––––––––––––––––––––––

NEED ENGINE - REBUILDABLE OK. IH UD6 OR TD6 FOR MY 10 KW GENERATOR. PHONE: 603-924-3837 EMAIL: LARP@WORLDPATH.NET –––––––––––––––––––––––––––––––– A PETROL TANKER, WITH A CAPACITY OF 5000 LITERS, A 4 WHEEL DRIVE . CONTACT: JOHN KABBAH PHONE: +231 886 682 755 EMAIL:JOHNKABBAH2005 @HOTMAIL.COM –––––––––––––––––––––––––––––––– SYMONS CONCRETE FORMS | ALL TYPES OF SYMONS STEEL PLY FORMS AND ACCESSORIES-USED CONDITION. ANY MANUFACTURER EQUAL TO SYMONS IS FINE. CONTACT: GREG MILLS PHONE: 502-561-0700 FAX: 502-561-0180 EMAIL:GREG@MILLSSUPPLY.NET –––––––––––––––––––––––––––––––– CLARK 85 WHEEL LOADER | 2420 H 2 REBUILT TRANSMISION CONTACT: RICK PHONE: 5862555067 EMAIL: RICKYSHARPE53@YAHOO.COM –––––––––––––––––––––––––––––––– CRANKSHAFT | I NEED A CRANKSHAFT FOR A MITSUBISHI S4K-T ENGINE THAT IS IN A CAT 120B CONTACT: EDDIE GREEN PHONE: 864-327-3909 EMAIL: EDDIE@BRUCEEQUIPMENT.COM –––––––––––––––––––––––––––––––– PICKUP TRUCK | 2006-2010 FORD F150 5.4 AUTO EXTEND CAB WITH HITCH FOR SMALL CONSTRUCTION COMPANY CONTACT: DUANE MILLER PHONE: 304-772-4030 FAX: 304-772-5030 EMAIL:MILLERD7@FRONTIER.COM –––––––––––––––––––––––––––––––– SPEAR PARTS EXCAVATOR 225 | EXCAVATOR 225 SPEAR PARTS NEEDS CONTACT: OSAMA PHONE: 00218925623078 EMAIL: LBDAA2000@YAHOO.COM –––––––––––––––––––––––––––––––– STRAIGHT TILT BLADE FOR D6D SN. O4X7898 CONTACT: TONY SANDERS PHONE: 9036417767 EMAIL:NOMAINDUSTRIES@YAHOO.COM –––––––––––––––––––––––––––––––– 644 OR 544 VALMET FORWARDER. CONTACT: JEFF CARLSON EMAIL: JCARLSON440@YAHOO.COM –––––––––––––––––––––––––––––––– VERMEER SC 252 | NEEDS EXTRA WHEEL AND TIRE SET FOR VERMEER SC252 STUMP GRINDER USED CONTACT: RICKY PHONE: 205 281 8315 FAX: 205 640 3062 EMAIL: RAY390G@GMAIL.COM –––––––––––––––––––––––––––––––– FAE STCSSL 150 | I NEED THIS CRUSHER AND THE SKID MUSTANG CONTACT: ANNE PHONE: 956 984 90 10 EMAIL:ANNELOREND@HOTMAIL.COM ––––––––––––––––––––––––––––––––

Page 124 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS

• Tipton, CA Fri., February 12, 2016

www.lyonauction.com 315-633-2944

• Orlando, FL February 15-19, 2016

• Hagerstown, MD Wed., December 30, 2015 For: Late Model Construction Equipment

• Fort Worth, TX March 2-3, 2016

• Long Island, NY Sat., January 9, 2016 For: Late Model Construction Equipment • Houston, TX Sat., January 14, 2016 For: Very Large Rental Return Auction • Columbus, OH Sat., January 16, 2016 For: Late Model Rental Fleet Equipment & more • Racine, WI Sat., January 23, 2016 For: Complete Liquidation Paving, Asphalt, Construction Equipment & more • Queretaro, Mexico Fri., January 29, 2016 For: Late Model Construction Equipment

BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Sacramento, CA Sat., January 9, 2016 For: Heavy Equipment & Commercial Trucks

oming

To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com

www.bidadoo.com 1-877-BIDADOO • ONLINE ONLY December 29 – January 5, 2016 For: End of Year Rental Auction

BIG IRON

www.IronPlanet.com 888-433-5426

• ONLINE ONLY Thurs., January 14, 2016 For: Construction Equipment

• Livingston, LA January 28-29, 2016 For: 2 Day Construction Auction

• ONLINE ONLY Wed., January 6, 2016 For: GovPlanet

• ONLINE ONLY Thurs., January 21, 2016 For: Truck & Trailer Auction

• ONLINE ONLY Thurs., January 7, 2016 For: IronPlanet

• ONLINE ONLY Thurs., January 28, 2016 For: Construction Equipment

www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., February 19, 2016 For: Truck, Trailer & Equipment Auction • Marietta, PA Fri., April 15, 2016 For: Truck, Trailer & Equipment Auction

• Kissimmee, FL January 30 – February 7, 2016 For: 23rd Annual Rental Return Auction

• ONLINE ONLY December 30, 2015

www.hilcoind.com 877-37-HILCO

• Ashtabula, OH Sat., February 27, 2016 For: Large Job Completion Auction

• ONLINE ONLY January 27, 2016

• Las Vegas, NV Sat., March 5, 2016 For: Late Model Rental Fleet Equipment • Atlantic City, NJ March 31 – April 2, 2016 For: Annual 3-Day Auction: Rental Fleet, Late Model Construction Equipment & more • Rochester, NY Sat., April 16, 2016 For: Municipal Construction Equipment, Trucks, Trailers & more

RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Las Vegas, NV Fri., February 5, 2016 • Phoenix, AZ Tues., February 9, 2016 • Houston, TX February 10-11, 2016

COCHRAN AUCTIONS www.cochranauctions.com 301-739-0538 • Hagerstown, MD January 29-30, 2016 For: Contractor’s Equipment, Trucks & Trailer Auction • Saint Mary’s County, MD March 11-12, 2016 For: Semi-Annual 2-Day Contractor’s Regional Equipment/Truck Auction

EQUIFY AUCTIONS, LLC www.equifyauctions.com 888-535-8218 • Wills Point, TX January 20-21, 2016 For: Heavy Equipment & more • Cisco, TX February 24-25, 2016 For: Heavy Equipment & more

• ONLINE ONLY Wed., December 30, 2015 For: Construction Equipment

IronPlanet AUCTIONS

HILCO INDUSTRIAL, LLC

• ONLINE ONLY February 3, 2016

www.teitsworth.com

www.hendersonauctions.com 225-686-2252

www.bigiron.com 800-937-3558

• ONLINE ONLY January 20, 2016

RTI AUCTIONS

www.purplewave.com 866-608-9283

HENDERSON AUCTIONS

HESS AUCTIONEERS BIDADOO AUCTIONS

uctions

PURPLE WAVE AUCTION

• ONLINE/ONSITE Thurs., January 14, 2016 For: Late Model, Single Owner Heavy Haul Fleet

HOUSBY AUCTIONS www.housby.com 866-218-6266 • ONLINE ONLY Wed., December 30, 2015 For: Construction Equipment

HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Lower Burrell, PA Wed., February 3, 2016 For: Absolute Auction Complete Liquidation Rhino Construction Inc.

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Foley, MN Fri., March 11, 2016 For: Heavy Equipment • Foley, MN Fri., June 10, 2016 For: Heavy Equipment

• ONLINE ONLY Wed., January 13, 2016 For: GovPlanet • ONLINE ONLY Thurs., January 14, 2016 For: IronPlanet • ONLINE ONLY Wed., January 20, 2016 For: GovPlanet • ONLINE ONLY Thurs., January 21, 2016 For: IronPlanet • ONLINE ONLY Wed., January 27, 2016 For: GovPlanet • ONLINE ONLY January 28-29, 2016 For: IronPlanet • Orlando, FL February 9-12, 2016 For: IronPlanet

JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • Charleston, SC Wed., January 20, 2016 For: Coastal Carolina Contractors Absolute Public Auction • Brooklyn, MS February 26-27, 2016 For: 2 Day Early Spring Public Auction

MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888 • Pelzer, SC Wed., January 27, 2016 For: Construction Equipment, Trucks, Trailers & Related items

QUARRICK EQUIPMENT & AUCTIONS INC.

585-243-1563

• Cortland, NY Wed., January 20, 2016 For: Construction & Farm Equipment, Trucks & more

SHETRON AUCTIONS www.shetronequipment.com 717-532-8828 • Martinsburg, VA Fri., January 29, 2016 For: Construction & Farm Equipment

www.quarrickauction.com 724-439-1621

TERRA POINT LLC

• Uniontown, PA Thurs., February 4, 2016 For: Construction & Farm Equipment Sales

877-772-5998

• Uniontown, PA Thurs., April 7, 2016 For: Construction & Farm Equipment Sales

www.terrapointllc.com • Grand Prairie, TX Wed., January 13, 2016 For: Major Excavation & Landscape Contractor

UTILITY AUCTIONS www.utilityauctions.net

RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Lebanon, TN Sat., March 19, 2016 For: Construction Equipment

302-530-9103 • Wilmington, DE Fri., February 26, 2016 For: Construction, Utility & Forestry Equipment

WSM AUCTIONEERS ROLLER AUCTIONEERS

www.wsmauctioneers.com

www.rollerauction.com 866-515-1668

623-936-3300

• Denver, CO Wed., January 13, 2016 For: Construction Equipment • Denver, CO Wed., March 16, 2016 For: Construction Equipment • Denver, CO Wed., May 11, 2016 For: Construction Equipment

• Phoenix, AZ Sat., January 9, 2016 For: Construction Equipment, Trucks & more • Phoenix, AZ Sat., February 13, 2016 For: Construction Equipment, Trucks & more

• Denver, CO Wed., July 13, 2016 For: Construction Equipment

YODER & FREY AUCTIONEERS, INC.

• Denver, CO Wed., September 14, 2016 For: Construction Equipment

419-865-3990

• Denver, CO Wed., November 9, 2016 For: Construction Equipment

www.yoderandfrey.com • Kissimmee, FL February 8-15, 2016 For: 42nd Annual 7 Day Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 125

Hillview Equipment Founder George F. Pyne III Dead at 74 Mr. George F. Pyne III, 74, of Milford Mass., died Nov. 26, 2015 at his residence after an 11 year battle with cancer. He was the beloved husband of Roseleen (Houton) Pyne. A former Boston Patriot football player in the NFL, he, his father and his son Jim, were the first three generation family in the history of the NFL. Mr. Pyne was born in Milford, Mass., the son of the late George F. Pyne Jr. and the late Florence (Mainini) Pyne. He was a George F. Pyne III graduate of Milford High School, Class of 1959 and also a graduate of Olivet College in Michigan, where he was a standout football player, named as All Conference and an All American. Mr. Pyne was drafted by and played as a rookie for the Boston Patriots. Following his career in the NFL, he was a Mass Mutual Life Insurance Company sales executive. In the 1980’s he founded Hillview Equipment & Real Estate Development Company of Milford, Mass. Mr. Pyne was a lifelong resident of Milford and summered with his family in Falmouth, Mass. He was a longtime communicant of St. Mary’s Church in Milford and St. Anthony’s Church in Falmouth. He was a longtime member of the Milford Lions Club and had served as a member of the Milford School Committee for nine years, as well as a longtime town meeting member. He also was an avid fisherman, hunter and skier and he was a member of the Million Dollar Round Table in the insurance industry. Mr. Pyne was a member of the Milford High School Sports Hall of Fame; the Olivet College Sports Hall of Fame and had served as a member of the Board of Trustees at Olivet College. He also had the honor of having the Pyne Pavillion at Olivet College named in his honor. Along with his beloved wife of 51 years, he is survived by his four children: George Pyne and his wife Helene of Rye, N.Y.; Tara, wife of Patrick Kennelly of Milford, Mass.; David Pyne and his wife Kristin of Milford, Mass.; and James Pyne of Tampa, Fla.; his 12 grandchildren: Megan, Abigail, David, Brendan, Austin, Shannon, Kevin, Andrew, Rachel, Sophia, Michael and James; two sisters: Claudina Quinn of Cataumet, Mass., and Florence Ellen Mahoney of Wellesley, Mass.; also many nieces and nephews. His funeral was held Dec. 1. Memorial donations may be made to The St. Mary of the Assumption Church Renovation Fund, c/o St. Mary’s Church Offices, 17 Winter St., Milford, Mass. 01757 or to The Olivet College Football Program, 320 South Main St., Olivet, Mich. 49076. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Important Auctions 315.633.2944

www.lyonauction.com www.lyonauctionlive.com

AUCTION CALENDAR

follow @Lyo

us on

nAuc

tion!

Saturday, January 30-Sunday, February 7: Wednesday, December 30: HAGERSTOWN, 7-15. MARYLAND: Late Model Construction Equipment, KISSIMMEE, FLORIDA: 23rd Annual Rental Return Midi Equipment, Telescopic Forklifts, Aerials, Trucks, Auction of the Finest Late Model Construction Trailers, Equipment Trailers, Attachments, Support (New Equipment, Paving Aerial Lifts, Forklifts of all kinds, & Used). Agricultural Tractors & Equipment, Cranes, Truck 2. Saturday, January 9: LONG ISLAND, NEW Tractors, Dump Trucks, Service & Water Trucks, Boom YORK: Late Model Midi Size Cat, Komatsu Trucks, Pickups, All Types of Trailers, Very Large Construction Equipment, Aerials, Trucks & Trailers, and Quantity of New & Used Attachments & Support large Amount of Support Equipment & Attachments. Hilites- Excavators, Rubber Tired Loaders, Skid Steers, Equipment. Crawlers, Air Compressors, Welders, Generators, 16. Saturday, February 27: ASHTABULA, OHIO: Forklifts, Lite Plants, Truck Tractors, Dump Trucks, Large Large Job Completion Auction, Scrap Handling Quantity of New & Used Support & Attachments. Equipment, Sennebogan, Fvch Material Handlers, Large 3. Thursday, January 14: HOUSTON, TEXAS: Very 1.

Quantity Rolloff Boxes, Forklifts, Loaders, Very Large large Rental Return Auction, 5 Major rental companies. Hilites: 10 Rough Terrain Cranes, Hydraulic Excavators, Amount of Support Equipment & Large Scrap Piles. 15 Tractor Loader Backhoes, (3) 2012 Kobelco 17. Saturday, March 5: LAS VEGAS, NEVADA: Late SK210LC's, Rubber Tired Loaders, Cat 420E (4x4), (4) Model Rental Fleet Equipment, Construction Forklifts, JD 310J's, (4) Case 580N's (4x4), 15 Skid Steers, 10 Boom & Scissor lifts, Skid Steers, Trucks & Trailers, Crawler Tractors, Plus all other major items. Attachments. 4. Saturday, January 16: COLUMBUS, (DELAWARE) OHIO: Late Model Rental Fleet 18-19-20. Thursday, March 31, Friday, April 1, Equipment, Cranes, Hydraulic Excavators, Crawler Saturday, April 2: 3 Day Annual Auction: ATLANTIC Tractors, Rubber Tire Loaders, Tractor Loader Backhoes, CITY, NEW JERSEY: Rental Fleet Auction, Late Skid Steers, Aerials, Support Equipment, Attachments. Model Cat, John Deere, Komatsu Earth Moving 5. Saturday, January 23: RACINE, WISCONSIN: Equipment, Boom And Scissor Lifts, Forklifts, Dump Complete Liquidation Over 56 Years in Business. The Trucks, Truck Tractors, Trailers & Equipment. Finest Paving, Asphalt, Construction Equipment, Dump, Water, Service Trucks to be Found Anywhere. Highlights: 21. Saturday, April 16: ROCHESTER, NEW YORK: Blaw Knox 3200 (like new), Blaw Knox 2181, 14 Asphalt Municipal Construction Equipment, Truck & Trailers, & Vibratory Rollers, 2 Rescue Sweepers, Cat 140H, Cat Boom & Scissor Lifts, and Attachments. 140G, Cat 120H, TA 65C, 2013 Volvo 160, 2009 Cat 308, DTBA: SYRACUSE, NEW YORK: Late Model DCR, 2015 JCB 407, 2 Cat 906, 6 Skid Steers, 2 50 Ton 22. Lowboys (Paver Specials), 15 Tagalongs, 3 Waste Water Construction, Boom & Scissor Lifts, Aerials, Trucks & Tanks, 2006 ICW Quad Axle Dump, KW Lowboy Tractor, Trailers in Conjunction with Hard Hat Show (Dansville). 4 Service Tanks, 6 Flatbed & Pickups. 23. DTBA: TUSCALOOSA, ALABAMA: Large 6. Friday, January 29: QUERETARO, MEXICO: Construction Auction. Aggregate Equipment, Truck Late Model Cat, Komatsu, Case, Dynapac Earthmoving Tractors, Dump Trucks, Support & Attachments, Aerial Equipment, Forklifts, Aerial Lifts, Attachments, Trucks & Trailers…Plus More!!! Lifts, Forklifts.

www.lyonauction.com

Page 126 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Petrowsky Holds Two-Day Major Public Auction in Conn.

Ethan Gagnon (L) and Brian Korenkiewicz are part of the team at Petrowsky Auctioneers Inc.

Buyers sit comfortably in their chairs as three Cat 660 T/A truck tractors are driven by them on the equipment ramp outside.

Sales Representative Frank Boback (L) listens attentively to Owner Sammy Petrowsky’s words of wisdom as Mark Leone shares a light moment with the auctioneer.

etrowsky Auctioneers held a two-day major public equipment and truck auction held on Dec. 11 and 12 at its facility in North Franklin, Conn. The Dec. 11 auction included excavation, construction, compaction, paving, and crushing and screening equipment from Princess Equipment, NY Asphalt, Circle Line Carting and other area contractors. On Dec. 12, Arrow Equipment Rental and Sales, and Drywall Associates Inc. sold its contractor equipment and tool inventory. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

More than 500 onsite registered bidders attended Petrowsky Auctioneer’s North Franklin auction

Each piece of equipment stood waiting for its turn to be driven across the ramp and sold to the highest bidder.

see PETROWSKY page 138

Matt Weeks brought his two-year-old son Kade from Hebron, Conn., to peruse more than 400 lots of trucks and equipment.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 127

Page 128 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

J.G. Cochran Holds Liquidation Sale for Daisy Construction

.G. Cochran held a complete liquidation auction for Daisy Construction Company on Dec. 16 in New Castle, Del. After more than 40 years in business, Leonard Iacono, founder of Daisy Construction, recently decided to retire and liquidate his remaining assets with the company. This past September, Allan Myers Inc. purchased certain assets of Daisy Construction Company. Myers also contributed surplus equipment for the auction in New Castle. A wide selection of equipment went on the block, including Caterpillar, Komatsu, Hitachi, Gradall and Volvo excavators; Volvo artic trucks; Cat and Komatsu dozers; Cat, Bobcat and Gehl skid steers; Cat, Hamm, Sakai, Dynapac and Ingersoll Rand compactors; as well as many trucks and trucks. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG see COCHRAN page 140

A wide selection of equipment went on the block during the J.G. Cochran auction in New Castle, Del.

Joe Villa (L) and Denny Thompson represent Ransome CAT’s used equipment department.

Joe Krempasky, owner of Krempasky Equipment Company in Honesdale, Pa., may be interested in this Cat dozer if the price is right.

Jim Cochran of J.G. Cochran Auctioneers & Associates, Boonsboro, Md., auctions off a John Deere dozer at the recent sale for Daisy Construction Company in New Castle, Del.

Andrew Diffley, president of Design Contracting in Wilmington, Del., checks out the controls of this roller.

Walt Joachim Jr. (L) and Ron Gumbert, both of Penn Jersey Machinery, take time for a photo between two Volvo wheel loaders.

Marshall Kanten of Allan Myers checks the screen condition of an asphalt paver.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 129

BUSINESS SOLD - RENTAL RETURN AUCTION (FORMERLY WILSON RENTALS) CONSTRUCTION EQUIPMENT, AERIAL LIFTS, FORKLIFTS & ATTACHMENTS

LONG ISLAND (HAUPPAUGE), NEW YORK - SATURDAY, JANUARY 9 @ 9:30 AM ADDRESS: 18 Central A Av venue, Haupp pauge, New York 11788; Exit #56 off Long Island Expressway

ALEX A LE X

LYON LY YO N & SO SON N

F FOR OR B BID ID O ONLINE NLINE T EC H N I C A L TECHNICAL A S S I S TA N C E ASSISTANCE C A LL CALL (919 919) 595 595-29 07 2907

HILITES INCLUDE: 19 HYDRAULIC EXCV EXCVATORS: VA ATORS: Cat 345LC, Cat 320LC, 2008 Cat 314CL, 2011 Cat 312DL, (2) 2008 Cat 312CL, New Unused Cat 311FLRR, 2011

Cat 308DCR, 2008 Cat 308CCR, 2011 Cat 305DCR, (2) 2015 JCB 8018CTS, Kobelco SK210LC, Komatsu PC60-7, (2) Terex HR16, 2006 Yanmar VIO27, 2009 Yanmar B15, anmar B08, 9 RUBBER TIRED LOADERS: New Cat 908M, (3) 2014 Cat 906H2, 2011 Cat 906H2, Cat 936, (2) New JCB 409, New JCB 407, 3 TRACT Yanm OR LOADERS: TRACTOR (2) 2007 Kubota L3830, NH 575E (4x4), CRAW WLER WLE TRACTOR: TRACTOR: Cat D3B, UTILITY Y TRACTOR: TRACTOR: Ford 1920, 5 TELESCOPIC FORKLIFTS: (2) 2005 JLG 534D945, Gradall CRAWLER 534D945, 945, 2006- 2005 Gradall G642P P,, 4 FORKLIFTS: 2006 Ausa CH250, 2006 Komatsu FG40ZT8, 2011 Komatsu FG25T16, Toyota, 7 MINI TRACK LOADERS: 2011 TORO Dingo TX525, 2008 TORO Dingo TX525, 2007 TORO Dingo TX425, 2005 TORO Dingo TX425, TORO Dingo TX425, Toro Toro Dingo TX420, 2011 TToro oro TX252, RUBBER TRACKED SKID STEER: 2011 TTakeuchi akeuchi TL240R, SKID STEER: 2008 NH 160, VIBRATORY VIBRATTOR RY ROLLERS: (2) Stone SD54, 3 ASPHALT ASPHALT ROLLERS: Wacker RD11A, Bomag, Brother UP9-D, 3 TRENCH ROLLERS: 2007 Multiquip P3324HHMR, Multiquip P3324HHMR, 2005 Stone TR34R, 4 BOOM LIFTS: 2011 Biljax 4527A, 2007 Biljax 4527, (2) Genie Z30, 19 SCISSOR LIFTS: 2007 Skyjack SJ8831RT (4x4), 2006 Skyjack SJ7127 (4x4), (2) 2006 Skyjack SJIII4626, (3) 2006 Skyjack SJIII3226, (4) 2008 Skyjack SJIII3219, (2) 2008 Genie GS2668, 2007 Genie GS2668, (2) 2010 Genie 25AWP P, 2009 Genie GR20, Snorkel SL25, Ter-ex, 9 LIGHT PLANTS: (2) 2009 Allmand Nitelite Pro, (5) 2008 Allmand Nitelite Pro, (2) 2009 Allmand Nightlite PronL7, AIR COMPRESSORS: IR XP375WIR, 2007 IR P185WIR, 3 WELDERS: Miller, Miller MG130 Mig, 2007 Multiquip DLW300ES, WATER ORS: JD JD235, TRACTORS: WATE TER PUMP: 2006 Multiquip 600TD80, COMMERCIAL MOWERS: 2010 EXMark LZAS23KC524, 2008 EXMark LHP23KC523, LAWN LA AWN & GARDEN TRACT 2010 JD X500, 4 WOOD CHIPPERS: 2005 Morbark M12R, (2) 2008 Vermeer DC625A, 2011 Vermeer BC1200XL, 4 CONCRETE EQUIPMENT EQUIPMENT:: (2) Multiquip 48in Power Trowel, 2006 Pullman 48in Power Trowel, 2005 Stone tone Mortar Mixerr,, TRENCHER: Vermeer T600D Rock Saw, 3 DUMP TRUCKS: 2005 Ford F750, 2007 Ford F550, 2007 Ford TRACTORS: TAGALONG F350, GARBAGE TRUCKS: 2008 Peterbilt 320, Int’l 7400, SWEEPER: TTennant ennant 6200, TRUCK TRACT ORS: 2006 Peterbilt 379, 2004 Peterbilt 379, TA AGALONG TRAILER: 16ft ASPHALTT TRAILER: 1994 Etnyre, 1111 PRESSURE WASHERS: Trailer 16ft x 6in, VAN VAN TRAILER: 2004 Hyundai, ASPHAL SURE W ASHERS: (2) New Easy Kleen Magnum Gold, (2) 2010 Karcher 2600ATING TING EQUIPMENT: EQUIPMENT: BTU HEA ATERS: TERS (4) 2005 All Pro 40k, (6) 2008-2006 HEATING HEATERS: 2500psi, Landa 3000psi, (4) 2009 MITM 4000-2500psi, 2008 Shark 2600psi, Simpson 1000psi, 41 HEA TERS: Desa 400-40K, (2) Flargo 200K, (4) 2007-2006 Heatwagon 200K, (8) 2008-2006 Master 400-100K, (7) Natlrivers 400-50K, (4) 2005 TPI 198TMC, (5) 2008 Universal 400-200K, ATTACHMENTS: HEATERS: 2006 Universal 400-200K, ELECTRIC HEA ATERS: TERS: (3) 2005 TPI 198TMC, 65 A TT TTACHMENTS: SKID STEER: Smooth, Snow & Mulch Buckets, 60in-78in Buckets, New Grapple Buckets, New Hay Spears, New Pallet Forks, New Fork Frames, New Brush Grapples, New Stump Buckets, 2005 Bobcat LR5B Harley Rake, Bobcat LR5B Harley Rake, 2007 Woods Bushhog, 2005 Harley M6 Harley Rake, Harley M6 Harley Rake, Landpride Bushhog, Rammer Hydraulic Hammerr,, TRACTOR: TRACTOR: (4) Noble Soil Pulverizer, Landpride Tillerr, MINI TRACK LOADERS: 2008 Dingo 22459 Trencher cher,, 2005 Dingo 22459 Trencher,, 2005 Dingo 22400 Auger Attachment, Dingo 22400 Auger Attachment, NEW SUPPORT EQUIPMENT PMENTT, 130 SUPPORT EQUIPMENT T,, 3 SURVEY SUR RVEY R VEY Y EQUIPMENT: EQUIPMENT: (3) 2008-2006 Berger Transit Level. EQUIPMENT, EQUIPMENT,

VERY LATE RENTAL RETURN AUCTION OF 5 RENTAL COMPANIES LATE MODEL CRANES, CONSTRUCTION EQUIPMENT, AERIALS, FORKLIFTS, TRUCKS & TRAILERS, SUPPORT EQUIPMENT AUCTION

HOUSTON, TEXAS - THURSDAY, JANUARY 14 @ 10:00 AM ADDRESS: 711 RANKIN ROAD, HOUSTON TEXAS 77073 TEXAS AUCTION LICENSE/AUCTIONEER: 15791/JACK H L LY YON SALE SITE PHONE: (863) 660-3613 HILITES INCLUDE: 10 ROUGH TERRAIN CRANES: 2013 Grove RT 765E-2, Tando TR600XL3 (60T), (3) Tando TR350XL (35T), Galion 150FA, (4) Galion 150FF,, 7 ARTICULATED ARTICULA ATED HAUL HA TRUCKS: (2) 2010 Volvo A25E (6x6), (3) 2008 Volvo A25E (6x6), (2) 2007 Volvo A25D, 9 TELECOPIC FORKLIFTS: (3) 2007 Genie GTH1056, 2008 Genie GTH844, 2006 Genie GTH844, 2006 Genie GTH644C, 2005 JCB 506C, 2006 JCB 520, Skytrak 8042, LONG REACH EXCAV VATOR: 2012 Doosan DX300LC (60ft), 19 HYDRAULIC EXCAVATORS: EXCA AV VAT ATORS: 2012 Cat 320EL, 2012 Doosan DX225BK, New Unused Doosan DX225LC-3, EXCAVATOR: 2012 Doosan DX225, 2011 Doosan DX350LC, 2012 Doosan DX300LC, Cat 320CL, Hitachi 2X330, 2012 Hitachi ZX35-U, 2010 Hitachi ZX35-U, (5) 2012 Kobelco SK210LC-9, 2008 Kobelco SK350LC, 2008 JD 200DLC, 2008 JD 120DLC, 2010 Takeuchi TB235C, 3 RUBBER TIRED LOADERS: 2012 Cat 950K, 2009 Cat 950H, 2006 JD 644J, 6 RUBBER TRACKED SKID STEERS: 2011 JD 323D, (3) 2008 JD CT322, 2006 Bobcat T250, 2006 Bobcat T190, 18 TRACT TRACTOR OR LOADER BACKHOES: 2014 Case 580N, (3) 2007 Case 580 Super M, (2) 2006 Case 580 Super M, (2) Case 580 Super M, Cat 420E (4x4), Cat D6RIIILGP P, (2) JD 310J (4x4), (4x4), JD JD 310G (4x4), 6 CRA CRAWLER AWLER WLER TRACTORS: TRACTORS: 2007 Cat D6RLGP III, Cat D6TT,, Cat D6N, Cat D3G, 3G, 2009 JD 550JLGP P,, 2008 JD 550JLGP, 4 AIR COMPRESSORS: 2011 IR HP935WCU, (2) 2006 Sullair 375DPQJD, 2005 Sullair 375DPQJD, VIBRAT TOR RY ROLLERS: 2007 Sakai SV505T VIBRATORY 84in, Hamm 3410, 4 BOOM LIFTS: (3) 2007 JLG 400S (4x4), 2005 JLG 400S (4x4), SCISSOR LIFT: LIFT: 2009 AEUP IAWP9.6, WELDERS: (2) 2005 Miller BigBlue 300, 3 LIGHT PLANTS: (2) 2008 IR Light Source, 2005 Genie TML4000N, W ATER TRUCK: 2006 Ford F650XL, TRUCK TRACT AT WATER TRACTOR: OR: 2006 Peterbilt 379 (Tri), DETACHABLE DETTACHABLE GOOSENECK TRAILER: 2005 LoadKing 553-SS (55T), 3 UTILITY TILITY VEHICLES: (2) 2008 Kawasaki Mule (4x4), 2007 Kawasaki Mule (4x4), WASHERS: (2) New Unused Easy Kleen Magnum Gold, 79 A TT TTA ACHMENTS: SKID STEERS: Smooth, Snow & Mulch Buckets, 60in- 78in Buckets, PRESSURE WASHERS: ATTACHMENTS: New Versatech Grapple Buckets, New Versatech Hay Spears, New Pallet Forks, New Fork Frames, New Versatech Brush Grapples, New Stump Buckets, 32 ew Mustang LF88 Plate Compactorr,, New Mustang Mu MP4800 2in Submersible Pump, New Mustang CV3500 Concrete Vibratorr, NEW SUPPORT EQUIPMENT: EQUIPMENT: New New 4 Pack 10lb Ratchet Straps, New 3pc 14in Premium Diamond Blades, New Huskie 11218SDS Hammer Drill, New Huskie skie B65 Jack Hammerr,, New Stiff Neck Pintle Hitch, New 1in Drive Air Impact Wrench, New 1/2in Drive Aim Impact Wrench Kit, New 5gl Steel Fuel Can, New 12V 15GPM Diesel Fuel Pump, New 2in x 50ft Discharge Water Hose, New 3pc Air Spray Gun Kit, New Auto Darkening Welding Helmet, New 3/8in x 50ft Automatic Air Hose Reel, New 5 Ton Digital 4ft x 4ft Platform Scale, New 3/4in x 50ft Jack Hammer Air Hose, SUPPORT EQUIPMENT: EQUIPMENT: Apt M190 90lb Air Breaker, Sullair lair MPB60A A 60lb Air Breaker.

ALEX LLYON YO & SON SALES MANAGERS & AUCTIONEERS, INC. YON 76 7697 97 ROUTE ROUTE 31, PO BOX 610, BRIDGEPORT, BRIDGEPORT, NY NY 13030 315-633-2944 315-633-2944 FFAX: AX: 315-6 315-633-8010 33-8010 LYON LLYONAUCTION.COM YONAUCTION.COM

Page 130 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Utility Auction Services Holds Final Auction of 2015

tility Auction Services held its last auction of the 2015 calendar year on Dec. 18 in Wilmington, Del. There was a strong showing of bidders in attendance at the auction, many looking to take advantage of the tax savings with Section 179 being passed. The auction kicked off with a huge “thank you” to all the attendees and bidders throughout the 2015 calendar year. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Carl Perrello, owner of Perrello Construction, came over from New Jersey for the auction.

The Utility Auctions crew gathered to thank its customers for a great year. They’re looking forward to an even better one in 2016.

Dump trucks, with and without plows, were ready for purchase. There was a strong showing of bidders in attendance at Utility Auction Services’s final auction of the calendar year.

Joe Harry (L), owner of J&L Lawncare and Trees, checks out the equipment with his laborer Travis Shoff.

Utility trucks were on display.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 131

Page 132 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ritchie Bros. Conducts December Multi-Million Dollar

ore than 2,750 bidders participated online and in person at Ritchie Bros.’ multi-million dollar unreserved public equipment auction in North East, Md., on Dec. 17. Bidders came from 45 countries, including all 50 U.S. states. Approximately 82 percent of the equipment was sold to out-of-state buyers, from as far away as Singapore, Germany and the United Arab Emirates. Online bidders purchased approximately 50 percent of the equipment sold. Close to 2,600 equipment items and trucks were sold in the auction, including more than 90 compactors, 75-plus excavators, 30 wheel loaders, more than 80 scissor lifts, 45plus boom lifts, more than 45 dump trucks, 105 truck tractors, 55-plus trailers, and more. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Many dozers were available at the Ritchie Bros. sale Dec. 17.

A big selection of excavators went on the block in North East, Md.

The younger generation of S&M Paving in Elkton, Md., bids on items while watching the rolling stock.

A Sennebogen 850 material handler was among the many items sold during the auction.

Kevin Kobus (L) of Ritchie Bros. and Jason Rohrer, general manager of JTech Truck Services catch up at the auction.

Chad Haring (L), John Deere territory manager, and Mike Kernan, vice president, both of Plasterer Equipment Company Inc., are ready to follow the auction.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 133

Unreserved Public Auction in North East, Maryland

Caterpillar dozers roll over the ramp. Auction attendees wait to be registered for the sale.

Santa Claus came early, helping guide people around the Ritchie Bros. auction yard.

Attendees bid online during the recent Ritchie Bros. auction in North East, Md.

Charlie Bagnall (L), northeast territory manager of Peterson, which specializes in portable land clearing equipment, and Tom Jamieson, sales manager of Cleveland Brothers CAT, Harrisburg, Pa.

Close to 2,600 equipment items and trucks were sold in the auction, including cranes.

Taylor Murphy (L) and Kathleen Llewellyn, both of Joseph Smith Enterprises of Wilmington, Del., are helping buyers price out container loading and equipment dismantling.

Page 134 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

No-Hassle Hose on Vacuum Excavator Saves Time, Energy This fall McLaughlin will introduce the next generation of its most popular vacuum excavator with an update that includes a nohassle hose design that will help save crews time and energy, according to the company. The VX50 Gen 3 vacuum excavator features a hose that can hang on the side of the machine as potholing crews move from hole to hole. Current designs on the market require a hose to either be coiled into place or disconnected and put away. “Hose handling is the top nonvalue-added activity of a potholing crew,” said Jeff Wage, McLaughlin vice president. “With the VX50 Gen 3, an operator simply hangs the hose on the side of the machine, moves to the next pothole location and pulls the hose off when he’s ready to work again. It makes crews much more productive by reducing the time and energy spent handling the hose.” The VX50 Gen 3 vacuum excavator is ideal for potholing jobs by utility contractors. It features spoil

The VX50 Gen 3 vacuum excavator features a hose that can hang on the side of the machine as potholing crews move from hole to hole. Current designs on the market require a hose to either be coiled into place or disconnected and put away.

tank capacities of 500 and 800 gal. (1,892.7 and 3,028.3 L). The vacuum hose is 4 in. (10.2 cm) in diameter and has a flow rating of 1,025 cfm (29 cu m/min) at 15 in. (38.1 cm) of mercury. The third-generation vacuum excavator is powered by a 49-hp

BusinessCalendar To view our Business Calendar online, go to www.constructionequipmentguide.com.

Associated General Contractors of America – AGC San Diego Chapter, Inc. AGC Installation & Member Awards Dinner January 18, 2016 Hilton San Diego Bayfront, 1 Park Boulevard, San Diego, CA 92101 AGC Winter Conference January 28-31, 2016 The Ritz-Carlton, Lake Tahoe For more information on the above events, contact AGC San Diego Chapter at 6212 Ferris Square, San Diego, CA 92121; PHONE: 858-558-7444; FAX: 858-558-8444. JOIN TODAY! The Associated General Contractors of America (AGC), the voice of the construction industry, is an organization of qualified construction contractors and industry-related companies dedicated to skill, integrity, and responsibility. Operating in partnership with our nationwide-network of Chapters, AGC provides a full range of services aimed at improving the quality of construction and protecting the public interest. Membership starts locally. Contact any AGC Chapter to request a membership application. The Associated General Contractors of America, Inc. 2300 Wilson Boulevard, Suite 300, Arlington, VA 22201 General Inquiries: 703/548-3118 Main Office Fax: 703/548-3119 info@agc.org AGC MO UPCOMING EVENTS: Project Manager Development Program – Module 1 January 5, 2016 – February 23, 2016 Construction Training School, Saint Louis, MO AGC California West Sacramento, CA Phone: 916/371-2422, Fax: 916/371-2352 Meetings and Events: 6th Annual North State CLC Working Weekend Region: Northern California February 19-20, 2016 It’s time for the 6th Annual North State CLC Working Weekend held at the Embassy Suites in beautiful Napa Valley! During the course of the event, there will be presentations and panel discussions covering an array of topics that directly affect the Construction Industry. In addition to panels and presentations, there will be a Corn Hole Tournament, a project site tour, and a wonderful dinner featuring a member project presentation on Friday the 19th. So prepare to enjoy a couple of days in Napa Valley with your friends in the Construction Industry! Hotel Information: Embassy Suites, Napa Valley

(36.5 kW) Kubota Tier IV final engine with a common-rail fuel injection system. The VX50 Gen 3 includes two features McLaughlin customers have come to rely on. One is a 3stage cyclonic filtration system that allows for both wet and dry vacu-

1075 California Boulevard, Napa, CA 94559 For More Information on this event, contact: Kasaundra Duncan at 916/371-2422 or go to duncank@agc-ca.org. AGC of MN - Minnesota Transportation Conference Annual Convention Tuesday, March 8, 2016 through Thursday, March 10, 2016 St. Paul River Centre, MN Contact: Denise Woods: dwoods@agcmn.org, Phone: 651/796-2189 Minnesota’s Transportation Conference, the largest transportation event in the state, explores the latest transportation innovations and provides attendees with the chance to network with other professionals. Individuals from multiple transportation-related disciplines and organizations are encouraged to attend. AGC of Utah Dates and Times: THURSDAY, JANUARY 21, 2016, 8:00 AM to SATURDAY, JANUARY 28, 2016, 11:00 AM Location/Venue: Little America Hotel, 500 S. Main Street, Salt Lake City, UT 84101 For more information on this event, contact AGC of Utah Headquarters at 2207 South 1070 West, Salt Lake City, UT 84119; Telephone: 801/3632753; Fax: 801/363-2756; Email: slagc@agc-utah.org. Associated General Contractors of New York State LLC, Albany, NY 10 Airline Drive, Suite 203, Albany, NY 12205 Phone: 518/456-1134, Fax: 518/456-1198 agcadmin@agcnys.org CALENDAR OF EVENTS: December 9th (ends December 10) – AGC Future Construction Leaders of NYS 1st of 4 sessions, December 9-10 Saratoga Hilton, 534 Broadway, Saratoga Springs, NY Nominate your firms Future Construction Leaders Today! This four event program will introduce your next leaders to help teach the issues involved in managing a construction business in New York State. Attendees will have an opportunity to learn, in a structured environment, what they might otherwise spend years learning from personal experience. Sessions will take place: December 9 – 10, 2015 – Saratoga Springs, NY March 2016 – New York City May 2016 – Rochester, NY August 4-6, 2016 – AGC NYS Summer Membership Meeting, Sagamore Resort, Bolton Landing. January 7th – Construction Tech Road Show & App Showcase 5:00 PM to 8:00 PM NYU Polytechnic School of Engineering, 6 Metrotech Roadway, Brooklyn, NY January 12th – STP Unit 3 – Planning & Scheduling (Buffalo) 5:30 PM to 8:30 PM (Tuesdays for 5 weeks) Construction Ex. of Buffalo & WNY, 2660 William Street, Cheektowaga, NY January 22nd – 27th, 2016 in Panama City, Panama 2016 AGC NYS Winter Meeting, Panama City, Panama Explore Panama with AGC NYS The AGC NYS 2016 Winter meeting will be held on January 22-27, 2016 in Panama City, Panama. We will be staying at the five star Trump Ocean Club International Hotel and Tower in Panama City, a 30 minute ride from the airport and located on the Pacific coast. Make your plans now to join us in January to explore Panama.

um excavation while prolonging filter life and helping to keep maintenance costs low. The other is the McLaughlin cam-over hydraulic rear door. It provides a 360-degree positive seal, even under reverse pressure, without additional clamping

February 23, 2016 (ends March 22) STP Unit 4 – Contract Documents (Buffalo) Time: 5:30 PM to 8:30 PM (Tuesdays for 5 weeks) Location: Construction Ex. of Buffalo & WNY, 2660 William Street, Cheektowaga, NY Supervisory skill – or the lack of it – directly affects every company’s bottom line. The Supervisory Training Program (STP) developed by AGC, is designed specifically to meet the needs of the construction industry. Developed, updated, and field-tested by and for contractors, the Program consists of 6 courses that focus on the knowledge and skills that every supervisor must have to be an effective manager of people, time, equipment and materials. OHIO NURSERY & LANDSCAPE ASSOCIATION ONLA ANNOUNCES NEW APPROACH TO GREEN INDUSTRY TRADESHOW IN 2016 CENTS SHOW – Growing the Midwest’s Green Industry JANUARY 11 – 13, 2016 GREATER COLUMBUS CONVENTION CENTER, OHIO For more information on this event, please contact the ONLA, 72 Dorchester Square, Westerville, OH 43081; Phone: 800/825-5062; Fax: 614/899-9489; email: info@onla.org MNLA – Minnesota Nursery Landscape Association NORTHERN GREEN EXPO JANUARY 13 – 15, 2016 MINNESOTA CONVENTION CENTER www.northerngreenexpo.org For more information on this event, please call 651/633-4987 info@northerngreenexpo.org Buy a booth at the show for green industry pros! Incredible Education Value - You won’t find a better value for your educational dollar than Northern Green Expo. World-class presenters who speak “green industry” fluently – Find an Exhibitor – Connect with the companies that make the Northern Green Expo Trade Show floor a great place to catch up with friends and do some business – PLAN TO EXPERIENCE IT FOR YOURSELF! AED Summit 2016 / The AED Summit & CONDEX Trade Show Event Type: Summit Dates: January 19 – 22, 2016 Categories: Equipment, Production, Business, Distribution, Industry, Manufacturing Venue: Gaylord National Hotel & Convention Center National Harbor 201 Waterfront Street, Washington, DC, USA Event Description: AED Summit 2016, The AED Summit & Condex Trade Show is going to be organized from 19 January, 2016 to 22 January, 2016. The place of the Summit was specified as Gaylord National Hotel & Convention Center. There is a chance to uncover the newest improvements in Equipment, Production, Business, Distribution, Industry and Manufacturing at this crucial Summit. The AED Summit & CONDEX Trade Show is organized annually. AED Summit 2016 is placed by Associated Equipment Distributors. AED Contact Information: 600 22nd Street, Suite 220 Oak Brook, IL 60523 Phone: 630/574-0650 Email: info@aednet.org POWER SHOW OHIO 46th Annual Power Show Ohio DATES: THURSDAY, JANUARY 28, 2016 FRIDAY, JANUARY 29, 2016 SATURDAY, JANUARY 30, 2016

requirements to keep fluids securely in the debris tank. No components are inside the tank, so maintenance is external. Automatic belt tensioners on the blower and the water pump help to make service simpler and faster. It also has an in-tank washdown system that makes it easier to remove debris and saves on tank cleanup time, according to the company. “The VX50 Gen 3 vacuum excavator was designed with the operator in mind,” Wage said. “The existing VX50 series is a great product, but the new generation shows we want to continuously make it the best, most efficient vacuum excavator for our customers.” The VX50 Gen 3 vacuum excavator will be available through the Vermeer global dealer network. For more information, visit www.mclaughlinunderground.co m. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

OHIO EXPO CENTER, COLUMBUS, OHIO A complete power equipment industry exhibition! Sponsored by the Ohio-Michigan Equipment Dealers Association, Power Show Ohio is one of the largest indoor equipment industry exhibitions in the country. The show features displays of agricultural equipment, construction equipment, and outdoor power equipment. For over forty years, Power Show Ohio has attracted tens of thousands of bona-fide visitors and more than 200 exhibitors each year to the Ohio Expo Center in Columbus. The show staff works diligently in providing a premiere equipment show that benefits exhibitors and visitors alike. The Ohio Expo Center is easily reached from Interstate 71 and the wide aisles in the exhibit buildings allow drive-in access to all the booths. The two buildings encompass over 212,000 square feet and are connected with tented walkways to assist with the attendee traffic flow. Power Show Ohio is held at a time when equipment buyers have time to consider their equipment purchases. The weekday/weekend combination allows everyone an opportunity to attend. Equipment manufacturers and wholesale distributors of agricultural equipment, construction equipment, and outdoor power equipment do not want to miss this opportunity to have your products seen by customers from across Ohio and all surrounding areas. For more information on the Power Show Ohio, contact AED, 600 22nd Street, Suite 220, Oak Brook, IL 60523. Phone: 630/574-0650. INFO@AEDNET.ORG. NTEA, THE ASSOCIATION FOR THE WORK TRUCK INDUSTRY ONE INDUSTRY, ONE ASSOCIATION, ONE RESOURCE THE WORK TRUCK SHOW 2016 DATES: MARCH 2 – 4, 2016 The Work Truck Show 2015 was a record-breaking success! Thank you to our attendees, exhibitors, sponsors, supporting organizations and partners for making it happen. Join us in Indianapolis, Indiana for The Work Truck Show 2016. Vocational truck fleet operators of all sizes, manufacturers, truck dealers and equipment distributors can attend North America’s largest work truck event on the following dates: THE WORK TRUCK SHOW 2016, March 2-4, 2016, Indiana Convention Center, Indianapolis, Indiana. The Work Truck Show features the newest vocational trucks, vans, vehicle components and equipment on a trade show floor covering more than 500,000 square feet. The event includes a robust educational conference with more than 60 sessions designed to help attendees improve their operations. For more information on this event, contact phone toll free: (800) 441-6832; Fax: (248) 489-8590; Email: info@ntea.com Staff Directory. CANADIAN RENTAL MART SAVE THE DATE! The Canadian Rental Mart returns MARCH 8 – 9, 2016 Canada’s national show for the equipment and party rental industries returns to the Toronto Congress Centre March 8 – 9, 2016. The Rental Mart continues to be Canada’s largest equipment expo and education forum for the rental industry. The 2016 Canadian Rental Mart will bring back all the great elements attendees have come to expect. Once again, exhibitors will be offering show-only special offers, not available at any other time. DON’T MISS OUT! Bustling Toronto, Ontario provides the backdrop to Canada’s biggest rental show and accommodations are conveniently located across the street at the luxurious International Plaza Hotel. The Canadian Rental Mart is Canada’s national trade show for the equipment and party rental industries, drawing hundreds of rental operators from across the country to Toronto biennially. For more information on this event, please call: 519/429-5199; Fax: 519/428-3094; CanadianRentalMart.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 135

VERY LARGE LATE MODEL CASE, JOHN DEERE & CAT RENTAL RETURN AUCTION PLUS TRUCKS, TRAILERS, SUPPORT EQUIPMENT & ATTACHMENTS

COLUMBUS, OHIO - SATURDAY, JANUARY 16 @ 10:00 AM ADDRESS: 935 U.S. 23 NORTH DELAWARE, OHIO 43015 SITE PHONE: (262) 903-6269, CHAD. OHIO LICENSE: 63199360809 9360809 9, OHIO AUCTIONEER LICENSE: 62199360989

ALEX A LE X

LYON L LY YO N & SON SO N

HILITES INCLUDE: ROUGH TERRAIN CRANES: 2013 Grove RT765E-2 (4x4), P&H Omega 40 (4x4), 24 HYDRAULIC CA AVATORS: 2012 Doosan DX350LC, (2) 2011 Doosan DX350LC, 2011 Doosan DX300LC, (2) New Unused Doosan EXCAVATORS: EXCA DX225LC-3, 2013 Doosan DX225LC-3, 2008 Doosan DX225LC-3, 2012 Cat 336EL, 2012 Cat 329EL, 2009 Cat 324DL, 2013 Cat 320EL, 2012 Cat 316EL, 2008 Cat 315CL, 2011 Cat 312DL, Cat 311C, New Unused Cat 305E, 2011 Cat 305D, ATERIAL HANDLER: MATERIAL Demo Cat 304ECR, 2005 JD 225CLRTS, (2) 2015 JCB 8018CTS, (2) 2012 Kobelco SK210LC-9, MA ARTICULATED 2005 Sennebogen 835M, 7 ARTICULA ATED HAUL TRUCKS: 2011 Cat 740B (6x6), 2006 JD 300D (6x6), (3) 2005 Terex TA40 (6x6), Terex TA30 (6x6), 2006 Moxy MT31 (6x6), 1111 RUBBER TIRED LOADERS: New Unused Cat 908M, 2014 Cat 924K, 2012 Cat 908H, (2) 2011 Cat 908H, 2009 Doosan DL300, (2) New Unused JCB 409, (3) New Unused JCB 407, CRAWLER 7 CRA RA AWLER WLER TRACTORS: TRACTORS: 2013 Cat D6TLGP, 2011 Cat D6TLGP P,, 2006 Cat D6TXL, (3) Cat D6D (winch), 2009 Dresser OR LOADER BACKHOES: (2) 2013 Cat 420E, 2011 Cat 426E (4x4), 2011 TD8M, MOT OR GRADER: JD 500A, 4 TRACT MOTOR TRACTOR Cat 416E (4x4), VIBRATORY VIBRA ATORY ROLLERS: New Dynapac CA2500D (Cab), New Dynapac D1500D, WOOD CHIPPERS, 21 RUBBER TRACKED SKID STEERS: Demo Cat 289DXPS, (3) 2012 Case TV380 (Cab), 2013 Case TR320 (Cab), (4) 2012 Case TR320 (Cab), (2) 2012 Case TR270, 2015 Cat 289D2, (2) 2012 Case TR270 (Cab), (5) 2012 JD 319D, 2011 JD 319D, New Unused Kubota SVL90-2, 5 TELESCOPIC FORKLIFTS: (3) New Unused 2016 JCB 540-140 (4x4), 2006 JCB 506CHL (4x4), 2008 Genie GTH-844 (4x4), 12 BOOM LIFTS: (2) 2007 JLG 450A (4x4), (6) 2007 JLG 400S (4x4), (3) 2006 JLG 400S, 2007 Genie S40 (4x4), SCISSOR LIFTS, IFTS, GENERA ATTORS, LIGHT PLANTS, AIR COMPRESSOR: IR P185WJD, GENERATORS, 5 AG TRACT TRACTORS: ORS: JD 4650 (4x4, Cab), JD 4040 (Cab), Case IH 7210 (4x4, Cab), Case IH 5140 Maxxum (4x4, Cab), Ford 8630 (4x4, Cab), FUEL/LUBE TRUCKS: 2004 Kenworth (NICE), 1982 Int’l, T TAGALONG AGALONG TRAILER: 2002 Rolls Rite 12½ ton EQUIPMENT, WATER TRUCK, DUMP TRUCKS, SERVICE SER RVICE VICE TRUCK: 2008 GMC, 10 SNOW EQUIPMENT T,, TIRES, (25000lb Capacity), WATER PRESSURE ATTACHMENTS: PRESSU RE WASHERS: WASHERS: (2) New Easy Kleen Magnum Gold, 78 A TT TACHMENTS: SKID STEER: Smooth, Snow & Mulch Buckets, 60in-78in Buckets, New Grapple Buckets, New Hay Spears, New Pallet Forks, New Fork Frames, New Brush Grapples, New Stump Buckets, 35 NEW SUPPORT EQUIPMENT EQUIPMENT..

COMPLETE LIQUIDATION OF BLACK DIAMOND GROUP INC RACINE, WISCONSIN - SATURDAY, JANUARY 23 @ 10:00 AM SPECIAL NOTE: BLACK DIAMOND GROUP INC, A HIGHLY LOCAL SUCCESSFUL CONTRACTOR SINCE 1959, HAS DECIDED TO RETIRE, SMELL THE FLOWERS AND ENJOY LIFE. THE EQUIPMENT AND TRUCKS FOUND HERE ARE IN EXCELLENT CONDITION AND WILL SUIT ANYBODY AND EVERYBODY. ADDRESS: 1755 SE FRONTTAGE ROAD, STURTEV VANTT, WISCONSIN 53177 SITE PHONE: (262) 903-6269 CHAD REGISTERED WISCONSIN AUCTION FIRM/AUCTIONEER: 223-053, ALEX LY LYON & SON/ 1878-052, JACK LLY YON HILITES INCLUDE: 3 APHAL APHALT LTT PAVERS: PAVERS: VE Blaw Knox 3200 (New 10EZIV Screed), Blaw Knox PF2181 (Carlson E2III), 2005 Leeboy 8500, 10 ASPHALT ASPHALLTT ROLLERS: Cat CB534DXW, Cat CB434DXW, 2010 Cat CB34, Cat CB334, 2010 Cat CB24, Cat CB224D, Bowmag BW135AD, Bowmag BW151AD2, IR DD16, 5 VIBRATORY VIBRA ATTORY ROLLERS: 2015 Dynapac CA2500, 2015 Dynapac CA1500, IR SD70D, Bowmag BW213, Vibromax 255, Vibromax 1105, SWEEPERS: 2010 Rosco RB48, Rosco RB28, DISTRIBUTOR DISTRIBUTOR TRUCK: Mack Midliner, HYDRAULIC EXCA EXCAVATORS: AV VATORS: 2013 Volvo EC160, 2009 Cat 308DCR, 4 MOTORGRADERS: MOTORGRADERS: Cat 140H, Cat 120H, Cat 140G, Flatallis 65C, CRAWLER CRA AWLER LOADER: Cat 963C, 6 RUBBER TIRED LOADERS: 2012 Cat 908H, 2012 Cat 908H, (2) 2015 Cat JCB 409, (2) JCB 407, TELESCOPIC FORKLIFTS: 2015 JCB 540-140, Lull 1044C, 6 SKID STEERS: (2) 2010- 2008 Case 450, 2013-2009-2003 Cat 262C, RUBBER TRACK SKID STEER: 2010 Case 440, LOADER LANDSCAPE TRACT TRACTOR: OR: Case 570XT, 4 TRUCK TRACTORS: TRACTORS: Kenworth T800, IH (T/A), 2010 Peterbuilt, 2012 Cat CT660S, EQUIPMENT TRACT TRACTORS: ORS: Best 50T Paver Special, LoadKing 50T Paver Special, 14 TAGALONG TAGALONG TRAILERS: 2011-2007-2001-1999 Towmaster 20T, 2015 Towmaster (12T), 2007 Towmaster 6T (tilt), 2008 Towmaster IL C12, 2005 Townster (6T), 2006-2003 Best (20T) (20 Eager Beaver 20T, Pace 6x10, (2) Townster own 1T, Cronkite 5T, 3 DUMP TRUCKS: 2006 KW T800 (Quad), 2002 Sterling (Quad), Ford F800 (Plow), 4 WA W WATER ATER TRUCKS: Ford LT9500 (4000gl), Volvo 4000 gal (T/A), Volvo 2000 gal (S/A), Ford L8000 (T/A), 8 SER SERVICE VICE & PICKUP TRUCKS: 2015 Ford F250 (4x4), Super Duty/ Plow, 2013 Ford F250, (2) 2011 Ford F450 Cab 4x4 (Service Body), 2003 Ford F350 (Service Body), 2007 Chevy 3500 (9ft body), 2009 Chevy Silverado 1500 (4x4), 3 FLATBED FLA ATBED TBED TRUCKS: Ford F550 (14ft), Chevy C5500 (14ft), Freightliner FLD112, ATTACHMENTS: ATTTACHMENTS: Skid Steer: Smooth, Snow & Mulch Buckets, 60in-78in Buckets, New Grapple Buckets, New Hay Spears, New Pallet Forks, New Fork Frames, New Brush Grapples, New Stump Buckets, New Unused 66-9 Grapple, New Unused 116in HD Snow Pusher with Adjustable 1in Thick Rubber, New Unused 93in HD Snow Pusher with Adjustable 1in Thick Rubber, JD HB60 Hydraulic Hammer, NEW SUPPORT EQUIPMENT EQUIPMENT:: New Mustang LF88 Plate Compactor, New Mustang MP4800 2in Submersible Pump, New Mustang CV3500 Concrete Vibrator, New 1in Drive Air Impact Wrench, New 1/2in Drive Aim Impact Wrench Kit, New 2in x 50ft Discharge Water Hose, New 3pc Air Spray Gun Kit, New Stiffff Neck Pintle Hitch, New Auto Darkening Welding Helmet, New 3/8in x 50ft Automatic Air Hose Reel, New 5 Ton Digital 4ftx4ft Platform Scale, New 800AMP 25ft, New 30x57 Welding Table, New 3/8in AR500 Gong Target, New 3/8in AR500 Dueling Tree Shooting Target.

Page 136 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ritchie Bros. Hosts Final Manchester, N.H., Sale of 2015

Mike Sherman (L) and Bill Inman, both of Milton CAT, check out the sale.

This Western Star Truck drew great interest at the show.

itchie Bros. hosted its last sale of the year on Dec. 8 in Manchester, N.H. In 2015, Richie Bros. sold more than 4,241 equipment items and trucks, totaling 26.5 million dollars in sales. This consisted of four sales at its Manchester, N.H., location, and one off site in Gloversville, N.Y. Bids were placed on site or online at rbauction.com.

Anderson Equipment’s Komatsu HM 350 articulated dump truck drew numerous bids during the sale.

“We would like to thank all of the companies who bought and sold equipment with us in 2015, and are looking forward to making new relationships in 2016,” said Josh Knott, regional sales manager of New York/New England Ritchie Bros.

Ritchie Bros. next sale in Manchester, N.H., is on April 21, 2016. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Ryan Filion (L) of Wallboard Supply Company, Londonderry, N.H., and Rene Perron of Eastern Metal, located in Londonderry, N.H., were happy to attend the sale.

(L-R): Joe Morin, Mike Lemieux and James Betrim, all of Pine Hill Construction in Charlestown, N.H., were looking to extend their equipment fleet.

Ritchie’s auctioneers were at attention and ready to kick off the sale, which first featured skid steers and loader backhoes.

The sale featured an extensive fleet of snowplow attachments to prepare local contractors for the winter season.

This fully enclosed trailer was one of many featured in the trailer lot.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 137

Page 138 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Proxibid Appoints McSweeney Senior Vice President of Sales

ABSOLUTE AUCTION COMPLETE LIQUIDATION Rhino Construction, Inc. Wed., Feb. 3, 2016 – 9:00AM Lower Burrell, PA (New Kensington/Pittsburgh Area) Skid Steer Loaders: `07 CAT 277 Crawler • `99 NEW HOLLAND LX985 • Skid Steer Attachments Hydraulic Excavators: `05 JOHN DEERE 35C Mini • `04 KOBELCO SK160LC • `90 JOHN DEERE 290D • Grapple, Buckets, Demo Hammer Paver, Roller, and Pump: `89 PUCKETT BROS. T450 • INGERSOLL RAND DA30 • `07 MULTIQUIP 6” Dump Trucks: `99 MACK CH613 Tri-Axle • `00 IHC 8100 Single Axle • `07 CHEVY 3500 Mason Dump • `98 DODGE 3500 Mason Dump Utility and Pickup Trucks: `08 DODGE 3500HD Utility • `05 GMC Canyon • `00 CHEVY 2500 Tag-A-Long and Cargo Trailers: `01 INTERSTATE 20 Ton • `07 CAM 5,000# • `06 NEW ALEXANDRIA 10,000# • `06 UNITED 6’x10’ • `03 SOUTHWEST 6’x12’ • WELLS CARGO 8’x20’ Contractors Tools and Accessories: CUMMINS 200KW Generator • `10 VERMAC Solar Arrowboard • WESTERN Snow Plow • Generators • Pumps • Paving Breakers • Concrete Saw • Hydraulic Chain Saw • Compactors • Pressure Washer • Scaffolding and Pic Boards • Sidewalk and Curb Forms • Ladders • Shop Tools • PLUS MUCH MORE!

Call (800) 233-6898 or Email sales@hunyady.com For Complete, Descriptive Brochure!

www.Hunyady.com PA A uction License No: AY 000281 W hile information is believed to be accurate, all items will be sold “A s-Is, W here-Is” without guarantee or warranty. A physical inspection is suggested.

Proxibid appointed Tom McSweeney as senior vice president of sales. McSweeney’s focus will be on growing Proxibid’s presence in the heavy equipment and industrial machinery markets. McSweeney brings a wealth of experience in managing quantifiable results as a senior-level leader in sales and business development. This, coupled with his deep international and sales operations experience, makes him a valuable asset to the Proxibid team. McSweeney joins Proxibid from InfoGROUP Inc., formerly known as InfoUSA, where he served in several capacities, most recently as executive vice president of enterprise solutions. In that role, he was tasked with merging several sales teams into one, building a comprehensive go-to-market strategy built around a client-centric approach. Prior to joining InfoGROUP, McSweeney contributed more than 25 years at Automatic Data Processing (ADP), where he had ever increasing roles of leadership and responsi-

bility for revenue, sales growth, and manpower. “Tom is a proven sales leader who brings vast experience which will help propel our sales organization to the next level,” said Ryan Downs, president and CEO of Proxibid. “We are thrilled to be adding an individual with Tom’s deep level of experience to the team. His track record at InfoGROUP and his tenure at ADP demonstrates his ability to scale and lead topnotch sales organizations.” McSweeney joins Proxibid during a period of rapid growth. The company, which works with more than 3,000 sellers, has added more than 579 customers in the last 18 months and is poised to significantly grow this roster as robust product offerings like Proxibid’s Buy Now and Make Offer tools continue to gain traction. For more information, visit www.proxibid.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Buyers Have Lots to Choose From at Petrowsky’s Sale PETROWSKY from page 126

Hank Spies of Milton CAT in Milford, Mass., keeps track of the action on Day 1.

Gary Arsenault of Arsenault Equipment Rental in Clinton, Mass., checks out this Roll Pac 3100 vibratory smooth double drum roller.

Frank Pereira, F.P. Landscaping in Warren, R.I., tests out this 2004 Bobcat S130 skid steer during the preview portion of the auction.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 139

DON’T MISS IT THE BEST SELECTION OF EQUIPMENT IN FLORIDA. PERIOD. FEBRUARY 9 – 12 | ORLANDO, FL HOSTED BY

OUR LARGEST UNRESERVED PUBLIC AUCTION EVER

2014 John Deere 6105M Farm Tractor (1 of 3)

2014 Cat D6N LGP Crawler Tractor (1 of 2)

2011 Cat 725 Articulated Dump Truck (1 of 2)

2012 Volvo L250G Wheel Loader

2006 Cat 140H Motor Grader

2011 Ford F550 Lube Truck (3 of 3)

1-888-433-5426

www.IronPlanet.com/Florida

BUY FROM THE LEADERS • Alban CAT • Altorfer Inc. • Blanchard Machinery • Blue Ox • Carolina CAT • Carter Machinery • Cleveland Brothers • Cowin Equipment • Everglades Farm Equipment • Fabick Cat • Finning • Foley, Inc. • Global Contracting Group, LLC. • Gregory Poole Equipment • H.O. Penn • Kelly Tractor Co. • Louisiana Cat • MacAllister Machinery • Michigan CAT • Milton CAT • Mustang Cat • Ohio CAT • Oldcastle • Patten Industries • PipeLine Machinery • Puckett Machinery • Ransome Cat • Riggs CAT • Ring Power Corporation • Stowers Machinery • Thompson Machinery • Thompson Tractor • UCM, Inc. • Walker Machinery • Whayne Supply • Yancey Bros. Co.

Cat Auction Services, An IronPlanet Marketplace

Page 140 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

J.G. Cochran Offers Wide Variety of Iron at Liquidation Sale COCHRAN from page 128

Floyd Price of Foxhole Farm, Galena, Md., tries out this Komatsu PC150LC for size.

Tyler Zalucki (L) and Jim Zalucki, both of JZ Excavating, Salix, Pa., are thinking about bidding on this Caterpillar 330C excavator.

Eric Noll of Pro-Pave, Sterling, Va., checks out this John Deere 750K dozer.

CEG to Again Participate at the Florida Auctions The 2016 Florida Auctions are fast approaching and just like many of you, Construction Equipment Guide (CEG) is making its plans to attend the big sales in the greater Orlando area in February. This year CEG will be a featured vendor at IronPlanet/Cat Auction Services’ auctions (Feb. 9 to 12), Alex Lyon Son’s auctions (Jan. 30 to Feb. 7), and Yoder & Frey’s auctions Feb. 8 to 15). Each year, tens of thousands of bidders from all over the United States and the world descend on Florida to look for bargains while stocking up their equipment fleets. The 2016 Florida Auctions should prove to be very well attended, and in fact, could be as successful as ever before, with the passing and signing of a long-awaited infrastructure bill. CEG looks forward to seeing you there. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Each year, tens of thousands of bidders from all over the United States and the world descend on Florida to look for bargains while stocking up their equipment fleets.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 141

Vanair Expands Its Office, Manufacturing Space Due to Growth Vanair Manufacturing, a provider of vehicle-mounted air compressors, generators, welders and multi-drive systems announced the acquisition of an 80,000 sq. ft. manufacturing facility from a private owner. This brings Vanair’s total production and office space to more than 160,000 sq. ft. The acquisition will accommodate increased growth and future expansion. The new office space, located on Highway 12, Michigan City, Ind., will provide capacity for increased manufacturing, training, support, service and leadership functions across the company. “Our team is excited about the growth we are experiencing, and this move represents our commitment to continue to build on the success our team has accomplished. The existing building is in great shape and has many additional areas for us to grow in. It was a great opportunity, versus having to build a new building of this type,” said Ralph Kokot, chief executive officer at Vanair. For more information, call 800/526-8817. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

What’s going on in YOUR COMPANY

We want to know! Give us a call.

Construction Equipment Guide

(800) 523-2200 or

FA X:

(215) 885-2910

Dealers From More Than 50 Countries Attend LiuGong 12th Global Conference LiuGong held its 12th Global Dealer Conference at Wanda Vista Hotel in Nanning. The theme for the conference is “Rise to Challenge and Embrace the Future.” Approximately 300 representatives, comprised of LiuGong dealers from more than 50 countries and more than 100 guests including key customers and government officials gathered in Nanning to celebrate the event. LiuGong Chairman Zeng Guang’an, President Yu Chuanfeng and a leadership contingent also were in attendance. Throughout the two-day meeting, the company and its global dealers reviewed the performance from the past year, exchanged opinions on common topics and discussed the company’s development strategy for the future. In conjunction with the “Belt and Road Initiative” mandated by the Chinese government, LiuGong will hold a “Belt and Road” seminar during the event. During the seminar, government representatives, industry associa-

Approximately 300 representatives, consisting of LiuGong dealers from more than 50 countries and more than 100 guests including key customers and government officials gathered in Nanning to celebrate the event.

tions, ambassadors and counselors from the “B&R” countries, and LiuGong’s global dealers gathered to discuss the future development of business as part of “Belt and Road,” and will look at current projects that are taking place as part of the strategy. One of the most significant movements as part of this to date has been a strategic cooperation agreement between

LiuGong and the China International Contractors Association to further promote its business in “Belt and Road” countries. For more information, visit www.liugong.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

ccc{ O]PG <G ;G >{ <RO

Page 142 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX ADVANCE TIRE ........................................................99 AIM ATTACHMENTS ................................................30 ALEX LYON & SON INC PLAN AHEAD CALENDAR ..........................125 LONG ISLAND NY 01/9 HOUSTON TX 1/14 ......................................129 COLUMBUS OH 1/16 RACINE WI 01/23 ........................................135 KISSIMMEE FL 01-30-2/27/2016..................137 ALEX PARIS CONTRACTING CO INC ....................23 ALL ISLAND EQUIPMENT CORP ..............................7 AMERICAN EQUIPMENT LLC..................................28 ARTIC SNOW & ICE CONTROL PRODUCTS........116 ASPHALT CARE EQUIPMENT ................................58 ASV ........................................................................94 ATI LEVEL BEST ......................................................40 ATLAS COPCO ........................................................62 BARGAINS ............................................................121 BASCHMANN SERVICES INC ................................29 BELL TRUCKS AMERICA INC ................................111 BEST LINE EQUIPMENT ..........................................24 BINDER MACHINERY CO ..........................................3 BLANCHARD MACHINERY INC ..............................28 BOBCAT COMPANY ................................................90 BOMAG - DLR ..........................................................59 BRANDYWINE TRUCKS & EQUIPMENT CO ..........36 CALDER BROTHERS CORPORATION....................69 CASE CONSTRUCTION ..........................................76 CATERPILLAR GLOBAL CONSTRUCTION ............31 CEG SCALE MODELS ..............................................74 CLASSIFIED ..........................................................122 CLEVELAND BROTHERS ........................................26 COMPANY WRENCH................................................42 CONSTRUCTION EQUIPMENT GUIDE ..........127,131 DANELLA USED TRUCKS & EQUIPMENT..............40 DAVE HALLMAN CHEVROLET ................................32 DEACON EQUIPMENT CO INC ..............................36 DITCH WITCH ........................................................110 DOMINION EQUIPMENT PARTS ............................99 EAGLE POWER & EQUIPMENT CORP..........120,143 EDWARD EHRBAR ..................................................17 ELLIOTT & FRANTZ INC ....................................52,62 EMPLOYMENT OPORTUNITIES ..........................120 EQUIPMENT MART OF NEW YORK........................37 ESCO CORP ..........................................................110 FIVE STAR EQUIPMENT INC (PA) ..........................32 FLUID CONTROL SERVICES ..................................36 FLUID POWER ........................................................119 FOLEY INC..................................................................9 GEHL SKID STEER ..................................................93 GEORGE & SWEDE SALES ....................................52 GOMACO CORP ......................................................60 GSE&E GARDEN STATE ENGINE & EQUIPMENT 35 H O PENN MACHINERY CO INC ............................16 HALE TRAILER BRAKE & WHEEL ..........................18

HARPER INDUSTRIES ..........................................118 HARTER EQUIPMENT INC ......................................19 HINIKER ..................................................................117 HITACHI CONSTRUCTION MACHINERY ..............109 HOFFMAN EQUIPMENT INC ..................................21 HRT/GEOMETRY GLOBAL INC ..............................96 HUNYADY AUCTION CO NEW KENSINGTON PA 02/03......................138 HYDREMA U S INC ..................................................51 HYUNDAI CONSTRUCTION EQUIPMENT ............107 IRONPLANET ORLANDO FL 02/09-12 ................................139 J D EQUIPMENT ......................................................28 JCB INC ....................................................................89 JESCO ........................................................................6 JFW EQUIPMENT INC..............................................56 JOHN DEERE..........................................................102 JOHN DEERE SKID STEER ....................................95 KAWASAKI ................................................................83 KOBELCO CONSTRUCTION MACHINERY ............41 KOMATSU AMERICA CORP ..................................113 KUBOTA ....................................................................97 KUBOTA SVL ............................................................87 LAWRENCE LYNCH CORP ......................................24 LEEBOY ....................................................................61 LINK-BELT EXCAVATORS ........................................78 M.H. EBY INC............................................................43 MESSICK’S ..............................................................99 METSO MINERALS SCREENING ..........................105 MIDLANTIC MACHINERY ........................................13 MIKE ZYNDORF LLC ................................................30 MILTON CAT..............................................................47 MUNICIBID.COM ....................................................141 NATIONAL ATTACHMENTS ......................................45 NEW MILLENNIUM RENTALS..................................47 NORRIS SALES CO INC ..........................................12 NPK CONSTRUCTION EQUIPMENT INC..............106 O.K. RENTALS ..........................................................33 OPDYKE INC ............................................................40 PAVEMENT RECYCLERS/BAGELA USA ................56 PENN JERSEY MACHINERY ....................................5 PETERSON PACIFIC CORP ..................................104 PINE BUSH EQUIPMENT CO ..................................25 PLASTERER EQUIPMENT CO INC ........................10 PRO-TEC ..................................................................45 RANSOME CAT ..........................................................2 RANSOME EQUIPMENT SALES LLC....................123 RAYCO ....................................................................108 RITCHIE BROS AUCTIONEERS UNRESERVED PUBLIC AUCTIONS ............144 ROAD BUILDERS MACHINERY ............................119 ROADTEC ................................................................67 ROCKLAND MFG....................................................108 ROSCO MFG CO ......................................................63 SAKAI AMERICA INC ..............................................65

SHORQUIP SUPPLY INC ........................................53 ST PIERRE MANUFACTURING CORP ..................118 STEPHENSON EQUIPMENT INC........................11,77 STEWART & STEVENSON ATLAS COPCO ............45 TAKEUCHI ................................................................84 TEREX CONSTRUCTION ......................................103 THUNDERCREEK ....................................................48 TRACEY ROAD EQUIPMENT INC ..........................15 TRAMAC CORP ......................................................108 TRANSPORT EQUIPMENT SALES ....................38,39 TRENCH SHORING SERVICES ..............................35 TRENCHTECH ..........................................................49 UTILITY AUCTIONS INC WILMINGTON DE 02/26 ..............................141 VOLVO COMPACTION..............................................57 VOLVO CONSTRUCTION EQUIPMENT ..................72 WACKER NEUSON ................................................100 WANTED ................................................................123 WEACO ....................................................................28 WESTCHESTER TRACTOR INC..............................48 WILCOX TRACTOR PARTS....................................120 WIRTGEN AMERICA ................................................70 WOODS CRW CORP................................................20 WORLD OF ASPHALT........................................54,114 YANMAR AMERICA ..................................................81 NEW ENGLAND SUPPLEMENT ACE EQUIPMENT SALES INC ..................................9 ARGUS INDUSTRIAL COMPANY ..............................1 ASTRO CRANE ........................................................12 BULLETIN BOARD ..................................................12 CHADWICK BAROSS MA......................................8,16 CLASSIFIED ............................................................12 E W SLEEPER CO....................................................13 EQUIPMENT EAST ..................................................1,7 FOLEY MARINE & INDUSTRIAL ENGINE ................1 GORILLA HAMMERS ..................................................1 HOLIDAY CENTER SPREAD....................................10 HYUNDAI CONSTRUCTION EQUIPMENT ..............17 J R VINAGRO CORPORATION ..................................1 LORUSSO HEAVY EQUIPMENT LLC ........................5 M G EQUIPMENT ......................................................1 MILTON CAT..............................................................12 NORTH EAST SHORING ........................................12 NORTHLAND JCB................................................12,15 POWERSCREEN NEW ENGLAND ............................8 R J POIRIER HEAVY EQUIPMENT REP..................16 ROGERS BROTHERS ..............................................19 SUMMIT SUPPLY LLC/MULTI MACHINE ..................1 THE N.I.C.E. COMPANY ..........................................14 THE W I CLARK CO ..................................................2 TYLER EQUIPMENT CO ............................................3 WOODCO MACHINERY ..........................................20

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 30, 2015 • Page 143

w w w. e a g l e p o w e r a n d e q u i p m e n t . c o m

Introducing the New Case 850M Series Dozer

RECENT TRADES 2013 Takeuchi TL10 Compact Track Loader, Stk# 36118, 1454 Hrs..................................................................................$43,500

2013 Case 650L Crawler Dozer, Stk# 36209, 643 Hrs.$79,000

1995 Case 580L Loader Backhoe, Stk# 36243, 8033 Hrs ......... ................................................................................................$21,500

2009 Case 580SM Loader Backhoe, Stk# 35695 .......$57,000

1996 Case 1840 Skid Steer, Stk# 36272, 3554 Hrs......$11,500

2012 Takeuchi TW80C Wheel Loader, Stk# 36115, 1012 Hrs... ................................................................................................$56,400

Authorized Dealer for These Quality Lines: Toro Dingos, Trenchers, Horizontal Directional Drills • Eager Beaver & CAM Trailers • Rammer by Allied Hydraulic Hammers & Shakers • Sims Cabs & Cab Enclosures • Guest Industries Forks • Airman Portable Air Compressors • Zanetis Planers • Trailking Trailers • FFC Attachments Frank Beck

Dean R. Leonetti

Pat DiCicco

Jim Lutz

Tom Scott

Richard Verna

Rodney Bush

Dean J. Leonetti

S. Montgomery Co.

Phila Co. & Bucks Co.

Bucks & N. Montgomery Counties

Delaware Co. & S. Chester Co.

215/870-4546

215/699-5871

215/680-9203

215/870-8567

S. Chester Co., Cecil County, MD, New Castle Co., DE

Skid Steer/Trencher Specialist Delaware Co., S. Chester Co., New Castle Co. DE, Cecil Co. MD

Skid Steer/Trencher Specialist Philadelphia Co., S. Montgomery Co., Bucks Co. & N. Chester Co.

302/354-1947

215/783-1847

Dean R. Leonetti, Sales Manager

•

215/699-5871

953 Bethlehem Pk (Route 309) Montgomeryville, PA 18936 215/699-5871 Fax 215/699-6416 NEW HOURS Mon.-Fri. 7AM-5:30PM

302/530-9134 Brandon Jewell, Toro Dingo Specialist

•

2211 Dupont Highway New Castle, DE 19720 302/652-3028 Fax 302/652-7540 NEW HOURS Mon.-Fri. 7AM-5PM

610/420-4770

610/312-3995

55 Senn Drive Eagle, PA 610/458-7054 Fax 610/458-7094 NEW HOURS Mon.-Fri. 7:30AM-4PM

Page 144 • December 30, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

More buyers from more places means better results when you sell

ORLANDO, FL | FEB 15-19, 2016 Sel Selll at the auction th that at att attracts racttss thou thousands sands of b buyers uyerrs ffr from rom m ar around rou ound world, year ear af after year. the w orld, y ftter y earr. Everryy FFebruar ebruarryy, Ritchie Brro os. hostss the prremier emier globall au auction in Orlando, attracting thou tho sands of competing buyerrs ffrrom arrrou ound the world, in perrson son and online. Don’tt miss outt – it’ss big ggerr, it’ss betterr, and nothing else comes close. Get the best results with Ritchie Brro os. – sell your equipment and trucks at our upcoming Orlando auction.

For morre e infform ormation, call 1.855.331.5757 or visit

rbauction.com/Orlando rbauction.com/Orlando