Ohio 09 2016

Page 1

90 80 6

OHIO STATE EDITION

A Supplement to:

422

6 80 24

6

4

71

76

199 30 30 75

68

30 77

71 23 22 68

4

70 70

®

70

22 71

75

77

27

April 23 2016

22 74

50

50 25

Vol. XVIII • No. 9

35

52

“The Nation’s Best Read Construction Newspaper… Founded in 1957.” Your Ohio Connection: Ed Bryden, Strongsville, OH • 1-800-810-7640

TGR Enters Placement Phase on Voinovich Bridge Project By Rick Zettler SPECIAL TO CEG

The Ohio Department of Transportation (ODOT) is in the midst of a multi-year program to replace the functionally obsolete and structurally deficient Innerbelt Bridge crossing the CSX and Norfolk Southern railroad tracks, city streets and Cuyahoga River in downtown Cleveland. The two new George V. Voinovich Bridges on Interstate 90 replacing the single 55-year-old structure will carry eastbound and westbound traffic through downtown and are just a part of the multibillion dollar Innerbelt Corridor revitalization program. The more than half-billion dollar bridge investment has already seen completion of one, 4,347-ft. (1,325 m) long bridge and demolition of the old Innerbelt Bridge. Construction has commenced on the second 3,918-ft-long (1,194-m) twin structure and, when completed in 2016, will add lane capacity to more efficiently and safely carry the 140,000 vehicles traveling through the downtown area every day. A design-build method —constructed by a joint venture between construction giants Trumbull, Great Lakes and Ruhlin (TGR) and designed by URS Corporation — is being used to save time. TGR purchased a Terex Bid-Well 4800 paver specifically for the project, and crews planned to use it in multiple ways to complete various project segments more efficiently to save time, labor and paving days.

The Ohio Department of Transportation (ODOT) is in the midst of a multi-year program to replace the functionally obsolete and structurally deficient Innerbelt Bridge crossing the CSX and Norfolk Southern railroad tracks, city streets and Cuyahoga River in downtown Cleveland.

Weekend Warrior TGR’s first planned project for the paver was flatwork paving a portion of East 9th Street in busy downtown Cleveland. “People often think of the 4800 paver as a bridge paver,” said Marty Bachey, Terex Bid-Well regional sales manager. “While it effectively paves bridges, it also can be equipped with a spud vibra-

tor for efficiently paving roads, similar to what TGR planned.” This small section of roadway carries three lanes of traffic and offers access to I-90 West. “The paving width for this project started at 50-ft. wide and tapered to 24-ft. wide,” said Fenton Moore, superstructure superintendent of TGR. The challenge of paving this

150-ft. (45.7 m) stretch of road was to complete the project, start to finish, over one weekend, so traffic had to be diverted to use alternate routes. TGR meticulously planned the project. Removal of the existing road and installation, grading and compaction of subbase material was to be completed Friday night into Saturday morning. Paving with the 4800 paver of a

medium-set, 24-hour-cure concrete would take place on Saturday. Finally, the crew would overlay the 9-in. (22.8 cm) concrete base with 3 in. (7.6 cm) of asphalt Monday morning before being reopened to traffic later that day. For this portion of the project, see VOINOVICH page 2


Page 2 • April 23, 2016 • www.constructionequipmentguide.com • Ohio State Supplement • Construction Equipment Guide

Cleveland Cavaliers Games Slow Progress on Project VOINOVICH from page 1

TGR planned to equip the paver with 24-ft. (7.3 m) end segments to allow up to 21-ft. (6.4-m) variable width paving at the right and left segments. This would allow the crew to vary paving widths by up to 42 ft. (12.8 m), offering more than enough capacity to meet the 25-ft. (7.6 m) taper on East 9th Street. Since TGR was prepared to use the 4800 paver for this project, the three manholes in this stretch of road were placed at grade without the need to construct box-outs, saving prep and paving time. “The operator can just lift the spud vibrator from the platform, move the paving carriage across the manhole and then reinsert the vibrators into the concrete,” said Fenton. The job was planned for early summer, but factors outside of TGR’s control significantly delayed the project. The Cleveland Cavaliers’ run into the NBA postseason saw home games taking place over the weekends, “and there was no way we would have been allowed to close East 9th Street with both home basketball and baseball games taking place over the weekend,” said Moore. Second, the weather did not cooperate, as more than two-thirds of the days in June saw measurable rainfall. Weather-related issues continually pushed back paving dates to the end of June to pour the 180 cu. yd. (138 cu m) of mediumset ODOT 4,500 PSI concrete. With a looming July start-date for critical bridge deck pouring, TGR officials made the decision to pull the 4800 paver from the East 9th Street project and subcontracted the flatwork paving to another contractor. Spreading the Load With street paving shifted over to the subcontractor, TGR focused its efforts solely on the July start to deck pouring with the 4800 paver for the $273 million eastbound traffic bridge. Placement width along the 3,918-ft. (1,194 m) long

The two new George V. Voinovich Bridges on Interstate 90 replacing the single 55-year-old structure will carry eastbound and westbound traffic through downtown and are just a part of the multibillion dollar Innerbelt Corridor revitalization program.

bridge varies from 119 ft. (36.3 m) to 87 ft. (26.5 m) wide on the main viaduct spans, and “the east approach measures 87 feet to 114 feet [34.7 m] wide,” said Jeff Lawson, viaduct superintendent of TGR. To complete the paving and placement projects, TGR purchased 126 ft. (38.4 m) of machine frame for the 4800 paver. Two, 15ft. (4.6 m) transition segments were included in the frame’s construction. These inserts help maintain machine structural rigidity and meet the bridge deck’s stringent, 0.125 in. (.3 cm) per 10 ft. (3 m) length smoothness specification. “Our transition segments increase frame depth from 48 in. at the ends to 66 in. in the center to provide a solid frame when paving at extended widths for the paving

carriage to travel,” said Bachey. In total, the bridge deck will require 15,000 cu. yds. (11,468 cu m) of an ODOT Class QC2/QA concrete with designed strength meeting 4,500 PSI. Deck placement was segmented into five deck-pours for the east approach and 19 pours for the main spans. While the bridge piers are positioned at skews to the centerline, the pours are broken up to where all are placed radially, so Terex Bid-Well’s available skew bar kit for the paving carriage is not required for this project. Most critical for deck placement is distribution of machine weight on the overhang brackets. To counteract machine weight deflecting the rail, TGR equipped its paver with the optional six-wheel bogie system instead of the machine’s standard four wheel bogies.

“The 4800 design begins with all welded construction for maximum frame strength with minimum weight to help prevent torsional deflection,” said Bachey. “Using the six-wheel bogie system spreads machine weight over an 18-ft. span, which is about 36 percent wider than the standard four bogies. This further aids contractors working in states like Ohio to meet stringent deflection specs.” In mid-July, TGR’s crews began the first of five pours to pave the 908 ft. (277-m) east bridge approach, which encompasses four spans and requires 2,800 cu. yds. (79 cu m) of concrete. The initial pour called for variable width paving of more than 30 ft. (9.1 m) from start to finish. With the machine’s frame offering up to 42 ft. (12.8 m) of leg travel to provide on-the-fly width changes, “the

4800 accommodated the variable width paving without any issues,” said Lawson. Paving of the four bridge spans of the east approach went smoothly. By purchasing the 4800 paver specifically for paving on the George V. Voinovich Bridge project, TGR and Lawson are confident that they have the machine configured to meet any paving challenge encountered complete the rest of the bridge work. “Terex Bid-Well pavers are the only machines I have used, and they performed well on the first five pours, so I foresee no issues on the horizon for this rest of this project,” said Lawson. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG


Construction Equipment Guide • Ohio State Supplement • www.constructionequipmentguide.com • April 23, 2016 • Page 3

companywrench.com

Toll Free: 866-262-4181

MDP M DP P PROCESSORS ROCESSORS

HDR H DR G GRAPPLES RAPPLES

2015 201 5 MSD M SD M MOBILE OBILE S SHEARS HEARS

G L O B A L D E A L ER ER OF THE YEAR

UP U PP PROCESSORS ROCESSORS

NATIONWIDE SPECIALIZED SALES & RENTALS YOUR SEARCH STARTS AND ENDS HERE! CARROLL, OHIO 4805 Scooby Lane (740) 654-5304

CLEVELAND, OHIO 525 Golden Oak Pkwy (440) 439-4567

MIDDLETOWN, OHIO 3120 S. Verity Pkwy (513) 649-8105


Page 4 • April 23, 2016 • www.constructionequipmentguide.com • Ohio State Supplement • Construction Equipment Guide

To See More Machines, Please visit us online at www.bobcat-ent.com Call Brad Kent at 513-266-7761 or on our USED EQUIPMENT HOTLINE: 888.BOBCATS

2013 S630 Bobcat Loader, 2125 Hrs, Cab Heat & Air, Power 2011 S750 Bobcat Loader, 3375 Hrs, Cab Heat & Air, Power 2013 E45 Bobcat Excavator, 1825 Hrs, Cab Heat & Air, Keyless, Long Arm, CN 93786 ......................................$44,500 Quick Tatch, Joysticks, CN 97585 ................................$34,500 Quick Tatch, Joysticks, CN 96939 ................................$35,000

2011 S770 Bobcat Loader, 1700 Hrs, Cab Heat & Air, 2 Speed, ACS Controls, CN 93400 ..................................$46,000

2013 T750 Bobcat Track Loader, 2620 Hrs, Cab Heat & Air, 2012 DL220 Doosan Wheel Loader, 600 Hrs, CN 84785 .......... 2014 DA30 Doosan Articulated Truck, 500 Hrs, CN 90330...... Roller Suspension, CN 96623 ......................................$44,000 ........................................................................................$123,500 ........................................................................................$328,800

2014 DX420LC-3 Doosan Excavator, 850 Hrs, CN 90363 ........ ........................................................................................$258,880

PRE-OWNED, JOB READY EQUIPMENT NOW AVAILABLE! Parts • Sales • Service • Rental • Training Cincinnati • Mt. Orab • Hilliard • Reynoldsburg • Lexington • Louisville

3 ! , % 3 s 2 % . 4 ! , 3 s 0 ! 2 4 3 s 3 % 2 6 ) # %

DRILL ILL RIGS FOR RENT 1.800.PILE.USA -or- www.ecanet.com PITTSBURGH PO Box 306 Coraopolis, PA 15108 P 412.264.4480 F 412.264.1158

PHILADELPHIA PO Box 387 Aldan, PA 19018 P 610.626.2200 F 610.626.2245

WASHINGTON, D.C. 6300 Foxley Road Upper Marlboro, MD 20772 P 301.599.1300 F 301.599.1597

TORONTO 166 Bentworth Ave Toronto, Ontario M6A 1P7 P 416.787.4259 F 416.787.4362

EQUIPMENT CORPORATION OF AMERICA B U I L D I N G F O U N DATI O N S S I N C E 1 91 8

AUTHORIZED DEALER:

PITTSBURGH

PHILADELPHIA

WASHINGTON

D.C.

TORONTO


Construction Equipment Guide • Ohio State Supplement • www.constructionequipmentguide.com • April 23, 2016 • Page 5


Page 6 • April 23, 2016 • www.constructionequipmentguide.com • Ohio State Supplement • Construction Equipment Guide

Flexible Pavements of Ohio Hosts Its Annual Expo

F

lexible Pavements of Ohio (FPO), an association dedicated to the development and advancement of quality asphalt pavement construction in the state, held its annual Ohio Asphalt Expo on March 30 to 31 at the Hilton Polaris in Columbus, Ohio. The event kicked off with an FPO membership breakfast and business meeting followed by a series of educational sessions conducted throughout the day and a half event. Also featured were an indoor and outdoor trade show and exhibition highlighting Ohio’s leading asphalt paving equipment, product and

service providers. Educational sessions covered a range of topics including financial management, safety issues and technical sessions on asphalt and paving. Attendees to the expo included those who construct, inspect, manage or maintain both public and private transportation infrastructure. For more information, visit www.flexiblepavements.org (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

(L-R): Scott Hartzell, Mike Kress, Randy McCabe, Jon Wickline and George Nofel, Southeastern Equipment Company, answer questions about the Bomag equipment on display.

(L-R): Mike Fenster, Columbus Equipment Company; John Karber, Roadtec; Tim Albright, Columbus Equipment Company; Chris Connolly, Roadtec; Jeff Freeland and Jeff Richards, both of Columbus Equipment Company; speak with attendees about the latest addition to Columbus Equipment Company’s equipment lineup. (L-R): Roy Riley, Matt Schlosser, Josh Poston, Brian James and Martin McCutcheon, all of Rudd Equipment Company, showcase the full lineup of Volvo paving equipment at the expo.

(L-R): Tony Wight, LeeBoy territory manager, assists Scott McLean and Jim Hattendorf, both of The McLean Company, in the outdoor equipment display area.

(L-R): Mike Rayz, Don Risko, Kevin Loomis, Craig Jeavons and Al Springer, all of Highway Equipment Company, Canton branch, welcome attendees to the company’s outdoor equipment display.

Eric Bischoff (L) and Tim Maharg, both of Murphy Tractor & Equipment, welcome attendees to their booth at the expo.

(L-R): Jason Kenworth and Randy Porter, both of Ohio CAT, join Keith Smith of Smith Challenger, sweeper brush manufacturer, at Ohio CAT’s outdoor equipment display.

(L-R): Jim Preston, Topcon, was on hand to help at the GeoShack booth with Nick Baker and Rob Yoakum. They were speaking with attendees about upcoming Technology Roadshows coming to Columbus and Cleveland in late April and early May.

Tyler Trowbridge (L), Powerscreen territory manager, and Rob Armbruster, Aggcorp, discuss the dealership’s line of material processing equipment.


Construction Equipment Guide • Ohio State Supplement • www.constructionequipmentguide.com • April 23, 2016 • Page 7

Yoder & Frey’s New Consignment Sale Will Open in May Yoder & Frey Auctioneers Inc. announced an addition to its auction schedule: the grand opening of the Ashland, Ohio, Annual Consignment Auction. Yoder & Frey Auctioneers is an Ohio-based auction company that has been serving the auction needs of the local and global community for more than 52 years. Though it has a large global presence in the heavy equipment industry, tradition and family value has remained crucial to Yoder & Frey throughout its successes. For this reason, when owner Peter Clark heard there was a demand for an auction in the Ashland, Ohio, area he began working with local businesses to try and assist the needs of the community. “We have buyers and sellers from all different parts of the world and we value those relationships, but when someone is telling you there’s a need and it’s right in your back yard, well, you just can’t ignore it,” Clark said. This isn’t the first time Yoder & Frey has assisted with public demand. Much like the new Ashland addition, the Kissimmee Winter Auction started in a similar fashion and celebrated its 42nd Annual Winter Auction in Kissimmee, Fla., this past February. Yoder & Frey was the first auction company to bring heavy equipment auctions to the Orlando area. Beginning in 1975, the company held its first Florida auction, which consisted of one main consigner and lasted only one day. Clark said, “though our chances of success were slim, we ended up raising 2.8 million dollars by the end of the day, which was a lot during that time.” By 1979 it had grown to 7.5 million and gained a heavy following. Years later, several auction companies began holding winter auctions in Florida as well, creating the Florida auction landscape we see today. Annually, Yoder & Frey has brought thousands of construction equipment professionals and enthusiasts to Florida, many of them international buyers. With the new Ashland, Ohio, addition, owner Peter Clark hopes to offer opportunities for successful heavy equipment auctions to individuals and companies in the surrounding areas. “You shouldn’t have to go to Florida to be able to get a nice piece of heavy equipment or vehicles. Some people don’t have time for that,” Clark said. “What we are trying to do is more than auctions though. It’s empowering communities, building relationships and helping local economies. We are from Ohio, let’s support Ohio.” The First Annual Consignment Auction is scheduled for May 17, 2016, at 9 a.m. Registration begins May 16, 2016. There will be a grand opening ribbon cutting that evening. If you are interested in consigning, please contact one of the following sales reps: John Murra: 419/865-3990, john@yoderandfrey.com; Kevin Teets: 304/266-2955, kevin@yoderandfrey.com; Daryl Houle: 603/856-1689, daryl@yoderandfrey.com; or Jason Stribling: 706/499-2850, jason@yoderandfrey.com. For more information, visit www.yoderandfrey.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

6$9( $ /,)( '21·7 '5,9( +20( %8==(' %8==(' '5,9,1* ,6 '581. '5,9,1*


Page 8 • April 23, 2016 • www.constructionequipmentguide.com • Ohio State Supplement • Construction Equipment Guide

EXPERIENCE THE

iMC Revolution y recently introduced Komatsu’ Columbus Equipment Compan Company K Komatsu’s omatsu’s hine Control (iMC) tec hnology y. groundbreaking intelligent Mac Machine technology. ansforming the w Ev er since, iMC has been tr ay Ohio contr acEver transforming way contracKomatsu’ omatsu’s market share has ballooned as the tors mo ve earth. K move Komatsu’s [[LJOUVSVN` WYV]LZ P[ZLSM ^OLYL P[ JV\U[Z PU [OL ÄLSK LJOUVSVN` WYV]LZ P[ZLSM ^OLYL P[ JV\U[Z PU [OL ÄLSK iMC integr ates GPS positioning antennae and sensors to integrates hine—not just the blade—thereb y maximizing ccontrol ontrol the mac machine—not blade—thereby material load and push. W ith no external daily setup, cost is With greatly reduced. Robust automatics and intelligence also get the contr actor on-gr ade faster—with fewer passes—increasing contractor on-grade W YVK\J[P]P[` HUK LMÄJPLUJ` I` HZ T\JO HZ WYVK\J[P]P[` HUK LMÄJPLUJ` I` HZ T\JO HZ

Columbus Equipment Compan y has pro vided Ohio customers Company provided ^ P[O \UWHYHSSLSLK WYVK\J[ Z\WWVY[ ZPUJL HUK JVU[PU\LZ ^P[O \UWHYHSSLSLK WYVK\J[ Z\WWVY[ ZPUJL HUK JVU[PU\LZ to do so. A specialized iMC support team will partner with yyou ou JJSVZLS` HZ `V\ PU[YVK\JL \UWYLJLKLU[LK JHWHIPSP[` [V `V\Y ÅLL[ SVZLS` HZ `V\ PU[YVK\JL \UWYLJLKLU[LK JHWHIPSP[` [V `V\Y ÅLL[ … and Experience the iMC Rev olution. Revolution. Contact Machine Control Manager Mike Fenster at (614) 802-7099 for more information on Komatsu’s D37i, D39i, D51i, D61i, D65i and D155AXi crawler and dozers and PC210LCi-10 excavator, a nd to schedule an iMC C demonstration.

9PJOÄLSK Columbus Toledo Cincinnati 9 PJOÄLSK Cadiz (614) 443-6541 (419) 872-7101 (513) 771-3922 (330) 659-6681 (740) 942-8871 Painesville Piketon Dayton Massillon Zaneville (937) 879-3154 (330) 833-2420 (740) 455-4036 (440) 352-0452 (740) 289-3757

Ohio’s Dependable Dealer

www..columbusequip . ment.com


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.